The rebound behaviors of rubber balls based on ethylene-propylene-diene monomer (EPDM) / chlorinated butyl rubber (CIIR) blends were investigated systematically. A novel method was proposed to characterize the damping capacity of the EPDM/CIIR blends. The damping capacity can be represented by the rebound height of rubber balls, and lower rebound height corresponds to better damping capacity. A mathematical model expressed by an equation obtained through theoretical derivation has been proposed to predict the rebound height of the rubber balls. The energy dissipation rate (EDR) defined by the ratio of the height loss to the rebound time was proposed to further characterize the damping capacity. The EDR value shows the highest for the pure CIIR and lowest for the pure EPDM, showing a decrease trend with the increase of EPDM content in the rubber blends. By comparison one can obtain that the damping capacity of the EPDM/CIIR blends decreases with the decrease of external excitation, the conclusion of which plays a key role in the formulation design of viscoelastic damping rubber materials.

Ever since Varela and Maturana proposed the concept of autopoiesis as the minimal requirement for life, there has been a focus on cellular systems that erect topological boundaries to separate themselves from their surrounding environment. Here we reconsider whether the existence of such a spatial boundary is strictly necessary for self-producing entities. This work presents a novel computational model of a minimal autopoietic system inspired by dendrites and molecular dynamics simulations in three-dimensional space. A series of simulation experiments where the metabolic pathways of a particular autocatalytic set are successively inhibited until autocatalytic entities that could be considered autopoietic are produced. These entities maintain their distinctness in an environment containing multiple identical instances of the entities without the existence of a topological boundary. This gives rise to the concept of a metabolic boundary which manifests as emergent self-selection criteria for the processes of self-production without any need for unique identifiers. However, the adoption of such a boundary comes at a cost, as these autopoietic entities are less suited to their simulated environment than their autocatalytic counterparts. Finally, this work showcases a generalized metabolism-centered approach to the study of autopoiesis that can be applied to both physical and abstract systems alike.

Biochar is a carbonaceous material derived from the thermochemical conversion of biomass under oxygen-lean conditions. Its properties render it many applications in agriculture, environmental remediation, and catalysis. Commonly produced by pyrolysis under a nitrogen atmosphere, the biochar composition is influenced mainly by residence time, heating rate, and process temperature. The existing literature primarily assesses biochar properties, such as ultimate, proximate, calorific, porosity, and combustibility, generated under various thermo-conversion conditions. However, there is a notable lack of sufficient investigation and attention given to the practical application of biochar. This article seeks to bridge that gap by enhancing the comprehension of the necessary experimental assessment for specific biochar applications and proposing process optimization methods using Multi-Criteria Decision Analysis (MCDA). By delving into these aspects, the study offers a concise overview of biochar production and presents a comprehensive panorama based on articles and patents. Additionally, the research explores the physicochemical characterization techniques associated with biochar and its various applications in conjunction with MCDA. This comprehensive approach aims to uncover valuable insights that could further advance the practical and sustainable utilization of biochar in a wide range of fields.

Both grape pomace and whey are waste products from the food industry that are rich in valuable ingredients. The utilisation of these two by-products is becoming increasingly possible as consumer awareness of upcycling increases. The biological activities of grape pomace extract (GPE) are diverse and depend on its bioavailability, which is influenced by processes in the digestive system. In this work, goat whey protein (GW) was used as the primary coating to protect the phenolic compounds of GPE during the spray drying process. In addition, trehalose (T), sucrose (S), xylose (X) and maltodextrin (MD) were added to the goat whey proteins as co-coatings and protein stabilisers. All spray drying experiments resulted in microcapsules (MC) with high encapsulation efficiency (77.6—95.5%) and yield (91.5—99.0%) and almost 100% recovery of phenolic compounds during the release test. For o-coumaric acid, the GW-coated microcapsules (MC) showed a bioavailability index of up to 731.23%. A semi-crystalline structure and hydrophilicity are characteristics of the MC coated with 10% T, S, X or 5% MD. GW alone or in combination with T, S, MD or X has proven to be a promising carrier for polyphenols from grape pomace extract and ensures good bioavailability of these natural antioxidants.

Tanning, crucial for leather production, relies heavily on chromium yet poses risks due to chromium's oxidative conversion, leading to significant wastewater and solid waste generation. Physico-chemical methods are typically used for heavy metal removal, but they have drawbacks, prompting interest in eco-friendly biological remediation techniques like biosorption, bioaccumulation, and biotransformation. The EU Directive (2018/850) mandates alternatives to landfilling or incineration for industrial textile waste management, highlighting the importance of environmentally conscious practices for leather products' end-of-life management, with com-posting being the most researched and viable option. This study aimed to isolate microorganisms from tannery wastewater and identify those responsible for different types of tanned leather biodegradation. Using a leather biodegradation assay (ISO 20136) with tannery and municipal wastewaters as inoculum, bacterial shifts during leather biodegradation were observed. Over 10,000 bacterial species were identified in all analyzed samples, with 8 bacterial strains isolated from tannery wastewater. Identification of bacterial genera like Acinetobacter, Brevundimo-nas, and Mycolicibacterium provides insights into potential microbial candidates for enhancing leather biodegradability, wastewater treatment, and heavy metal bioremediation in industrial applications.

Surface–subsurface soil-rock modeling is crucial for infrastructure design and groundwater yield optimization, especially in the complex crystalline basement terrains of Penang Island, Malaysia. This study conducted large-scale characterization of soil-rock profiles using ERT, SRT, rock quality designation, and soil penetration test (SPT N-values) data, optimized through regression modeling. The approach effectively identified soil-rock structures and their suitability to prevent structural failures and enhance groundwater productivity. Correlations between borehole lithologic logs and velocity–resistivity models revealed distinct soil compositions across the study area. The results highlighted thick, saturated, and loose silty to sandy bodies in the eastern to northern sections, contrasting with sandy compositions and penetrative fractures in the southern part. The study also found good correlations between rock mass quality and N-values for different soil types. Depths of intra-bedrock weathered/fractured units varied between 12 and >35 m. This has significant implications for determining optimal foundation depths in the study area. Groundwater productivity was associated with intra-bedrock planes of weakness at depths exceeding 40 m. Overall, this study developed empirical relations between geophysical and geotechnical parameters for wet tropical granitic terrains, filling critical gaps in understanding subsurface characteristics.

This work aims to investigate the effect of process temperature and catalyst content by thermochemical degradation of municipal solid waste (MSW) fraction (organic matter + paper + plastic) on the yield of reaction products (bio-oil, biochar, H2O and gas), physicochemical properties and chemical composition of bio-oils, as well as on the morphology and crystalline phases of biochar in laboratory scale. The organic matter, paper and plastic segregated from the gravimetric composition of total waste sample were subjected to the pre-treatments of drying, crushing and sieving. The experiments were carried out at 400, 450 and 475 °C and 1.0 atmosphere, and at 450 °C and 1.0 at-mosphere, using 5.0, 10.0 and 15.0% (wt.) of FCC zeolite, bath mode, using a laborato-ry scale glass reactor. The bio-oil was characterized for acidic value. The chemical functions present in the bio-oil identified by FT-IR and the composition by GC-MS. Biochar was characterized by SEM/EDS and XRD. Thermal pyrolysis of the MSW frac-tion (organic matter + paper + plastic) shows bio-oil yields between 9.44 and 9.24% (wt.), aqueous phase yields between 21.93 and 18.78% (wt.), solid phase yields between 67.97 and 40.34% (wt.) and gas yields between 28.27 and 5.92% (wt.). The yield of bio-oil decreases with increasing process temperature. For the experiments using FCC, the biochar and gas yields increase slightly with the FCC content, while that of bio-oil de-creases and the H2O phase remains constant. The GC-MS of bio-oils identified the presence of hydrocarbons and oxygenates, as well as nitrogen-containing compounds, including amides and amines. The acidity of the bio-oil increased with increasing temperature and with the aid of FCC as a catalyst. It has been identified the presence of hydrocarbons within bio-oil by addition of FCC catalyst due to the deoxygenation of carboxylic acids, followed by decarboxylation and decarbonylation reactions, producing aliphatic and aromatic hy-drocarbons.

This review focuses on an extensive synopsis of the recent improvements in the field of CO2 hydrogenation over structured zeolites including their properties, synthesis methods, and characterization approaches. The role of bimodal mesoporous structures surface oxygen vacancies, and the Si/Al ratio in improving catalytic activity is highlighted. The porosity, thermal stability, and structural integrity are also discussed in the review along with how structured zeolites are affected by electrical and plasma interactions. The synthesis methods are analyzed in detail by comparing the benefits and drawbacks of the bottom-up techniques, such as hard templating, soft templating, and non-templating on the one side; and the top-down approaches, e.g. dealumination, desilication, and recrystallization on the other. This review also draws attention to the necessity of overcoming the difficulties arising from these synthesis techniques, for example, micropore-induced diffusion restrictions and morphological constraints, employing innovative approaches and optimization strategies. Conventional and advanced characterization techniques are pointed out in this respect as crucial for understanding the catalytic mechanism and the dynamic behavior, hence, beneficial in the advancements of research on structured zeolites with higher efficiency and activity. The review ends with a perspective that highlights the necessity of further research in the improvement of synthesis approaches and characterization procedures of the structured zeolites to increase their catalytic activity in CO2 hydrogenation, a critical process of paramount importance in the global effort to reduce excessive carbon emissions and combat climate change..

This research paper focuses on the synthesis and characterization of Cu-doped Mg-Co ferrites with varying compositions (Mg_0.6-xCo_0.4Cu_xFe₂O₄, where x = 0.0, 0.1, 0.2, and 0.3) using a solid-state reaction method. This paper also investigates the structural, morphological, magnetic, and electrical characteristics of synthesized Mg_0.6-xCo_0.4Cu_xFe₂O₄, where x = 0.0, 0.1, 0.2, and 0.3. The X-ray diffraction (XRD) technique confirms the ferrites spinel structure in the Fd-3m space group, with average crystallite sizes ranging from 57.29 to 48.57 nm. Fourier Transform Infrared (FTIR) spectroscopy verifies chemical and structural changes, while scanning electron microscopy (SEM) reveals cubic crystal growth with an average grain size of 1 to 1.5 μm. DC electrical resistivity decreases with increasing temperature and Cu²⁺ substitution, ranging from 1.4 x 10⁶ Ω-cm to 6.7 x 10⁵ Ω-cm. The study suggests a correlation between resistivity and Cu²⁺ concentration. Magnetic behaviour, studied using a Vibrating Sample Magnetometer (VSM), shows dependence on dopant concentration, with coercivity ranging from 157 Oe to 256 Oe. The results indicate potential applications in magnetic storage devices, antennas, transformers, and high-frequency electronics.

This study delves into the extraction and compositional analysis of soybean meal protein isolates (SMPI) compared to soy protein isolates (SPI), focusing on their functional and structural properties, digestibility, amino acid composition, and the impact of various proteases on antinutritional factors. By leveraging alkaline (0.25 % of NH4OH) extraction and isoelectric precipitation, SMPI was efficiently obtained. Compositional characteristics revealed that SMPI has high moisture, protein, and ash, but lower fat, and carbohydrate content compared to SPI. Alcalase, Neutrase and Pepsin hydrolysis indicated lower digestibility of SMPI than SPI. Fourier-transform infrared spectroscopy and sodium dodecyl sulfate-polyacrylamide gel electrophoresis provided similar molecular structure and protein molecular weight distribution. This comprehensive analysis underscores the valorization of soybean meal, promoting its use beyond conventional animal feed towards nutritional supplements and bio-based products, thereby contributing to environmental sustainability and the enhancement of global food systems.

Wafer-scale blue micro-light-emitting diode (micro-LED) arrays are fabricated with a pixel size of 12 μm, a pixel pitch of 15 μm, and a pixel density of 1692 pixels per inch, achieved by optimizing the properties of e-beam-deposited and sputter-deposited indium tin oxide (ITO). Although the sputter-deposited ITO (S-ITO) films exhibit a densely packed morphology and lower resistivity compared to those of the e-beam-deposited ITO (E-ITO) films, the forward voltage (VF) values of a micro-LED with the S-ITO films are higher than those with the E-ITO films. The VF values for a single pixel and for four pixels with E-ITO films are 2.82 V and 2.83 V, respectively, while the corresponding values for S-ITO films are 3.50 V and 3.52 V. This was attributed to ion bombardment damage and nitrogen vacancies in the p-GaN layer. Surprisingly, the VF variations of a single pixel and of four pixels with the optimized E-ITO spreading layer from five different regions are only 0.09 V and 0.10 V, respectively. This extremely uniform VF variation is suitable for realizing micro-LED displays to be used in AR and VR applications, circumventing the bottleneck in the development of long-lifespan and high-brightness organic LED devices for industrial mass production.

: Sputtering of silicon in a Helium magnetron discharge (MS) has been reported as a bottom-up procedure to obtain He-charged silicon films (i.e. He nanobubbles encapsulated in a silicon matrix). The incorporation of heavier noble gases is demonstrated in this work with a synergistic effect producing increased Ne and Ar incorporations when using He-Ne and He-Ar gas mixtures in the MS process. Microstructural and chemical characterizations are reported by ion beam analysis (IBA) and scanning and transmission electron microscopies (SEM and TEM). In addition to gas incorporation, helium promotes the formation of larger nanobubbles. For the case of Ne high resolution X-ray photoelectron and absorption spectroscopies (XPS and XAS) are reported with remarkable dependence of the Ne 1s photoemission and the Ne K-edge absorption on the nanobubbles size and composition. The gas (He, Ne, Ar) charged thin films are proposed as “solid” targets for the characterization of spectroscopic properties of noble gases in a confined state without the need for cryogenics or high-pressure anvils devices. Also their use as targets for nuclear reaction studies is foreseen.

Chymotrypsin from the digestive organs of bigfin reef squid, a major commercial squid species in Thailand, was purified to 41.27-fold with 5.74% yield by a sequential purification process including ammonium sulfate precipitation, size exclusion and ion exchange chromatography. According to SDS-PAGE, the molecular weight of purified chymotrypsin was 43 kDa. Native-PAGE analysis revealed a single band for this purified enzyme. Optimum pH and temperature for chymotrypsin activity of the purified enzyme were pH of 7.0 with a temperatures of 55°C. The purified chymotrypsin remained stable throughout a wide range of pH levels (6–11) and at relatively high temperature (50°C). It was significantly inhibited by PMSF and TPCK. The values of the kinetic constants Km and Kcat were found to be 1.33 mM and 31.46 s‒1, respectively. The purified chymotrypsin has the N-terminal amino acid IVGGQEATPGEWPWQAALQV. This study provided new information about the biochemical properties of pure chymotrypsin from bigfin reef squid, which is useful in the future investigation, aquaculture and application of bigfin reef squid.

This article describes the synthesis of hydroxyapatite (HAp) flakes through a microwave-assisted hydrothermal method. These flakes are intended for use as substrates for depositing titanium dioxide (TiO2) films using chemical vapor deposition with metal–organic precursors (MOCVD). The results reveal the formation of crystalline hydroxyapatite characterized by a uniform mor-phology. Additionally, we demonstrated the successful deposition of TiO2 coatings on the hy-droxyapatite flakes, resulting in a distinctive faceted prism morphology. Our findings affirm the effective synthesis of the HAp/TiO2 composite material. To further explore the material’s practical applications, we recommend assessing the photocatalytic activity of these composite membranes in future research.

The as-received commercial Inconel 718 material was solid solution heat treated (ST), cold rolled (CR), and precipitation hardened (PH) to investigate the effects of deformation on tensile properties, hardness, and texture. Three sets of specimens (0%, 20% and 50% CR) were STed at 1100 C/1h, CR and aged (720 °C/8 h + 650 °C/8 h) for the analysis. Ultimate tensile strength (UTS), 0.2% yield strength (YS) and elongation of 50% deformed condition were 1645 MPa, 1512 MPa, and 3.8 %, respectively. The 20 % deformation resulted in a balanced UTS (1348 MPa), YS (1202 MPa) and elongation (11%). Contributions of precipitation hardening to the strength was decreasing, while contribution of CR increases with increasing percentage of deformation. Correspondingly, the size and quantities of  decreased with increasing deformation level. In CR specimens, a high density of nano/micro twins were generated with the twin planes oriented perpendicular to the RD-ND surface. The preferred rotation of the crystals generated the gradient of orientation and internal features of the large austenitic grains. The cross-slip of screw dislocations induced a complete β-fibre, consisting of {110}, {112}, and{123}, with doubled intensity at higher deformation. In addition, the specimens tended to be highly susceptible to the twinning-induced orientation emerged by a predominant ⫽ND. An incomplete but intense α-fibre clustered between {110} and {110} was characterized in the as-deformed condition. Besides achieving highest strength, the current work demonstrates the effects of CR on the material strength without the complex influences of  precipitate.

Measure While Drilling (MWD) refers to a comprehensive array of sensors employed to gather performance data throughout the process of rock drilling in mining blast holes. Multiple MWD metrics are collected by researchers depending on the setup of MWD sensors. Trends in MWD data can be correlated with pre-excavation subsurface conditions. The low-cost, extensive MWD data acquisition resolution of blast holes compared to expensive and sparsely collected exploration drill holes make the former one a desirable method for characterizing pre-excavation subsurface conditions. Nevertheless, the application of MWD technology in open pit mining is constrained by a substantial amount of data that requiring manual analysis within a short time. To address this limitation, computerized data acquisition and interpretation of MWD variables has been used to broadly determine open pit mining lithological boundaries. The results of artificial intelligence algorithms, such as Neural Networks, and Gaussian Processes, to recognize subsurface conditions, such as rock type, from MWD data have consistently returned >90% prediction accuracy. However, methods of evaluating the importance of each MWD feature, such as Principal Component Analysis, has not been optimally used. This review focuses on the progression of intelligent MWD analysis using Machine Learning methods in open-pit mining, to determine the geotechnical, geological, and geochemical subsurface characteristics before open-pit mining excavation.

The mushroom industry generates large amounts of stems, a co-product with valuable sensory and health characteristics. This work aimed to study the influence of particle size (L — >0.510 mm; LI — 0.510-0.315 mm; SI—0.315-0.180 mm; S — <0.180 mm) and species in the characterization and antioxidant activity of flours from stems of Agaricus bisporus (ABSF) and Pleurotus ostreatus (POSF). ABSF was rich in protein (14 g/100 g), calcium (428.23-700.77 mg/100 g), and sorbitol (22.57-26.60 g/100 g), while POSF in β-glucans (36.62-40.34 g/100 g) and linoleic acid (20.57-39.86 g/100 g of lipid). Both species were flush in amino acids with umami flavor. The highest hydration properties and oil holding capacity were exhibited in the S size of both species. ABSF showed elevated values for emulsifying activity than POSF. ABSF-S recorded the heightened antioxidant capacity in vitro, in consonance with the total phenolic compounds (0.91 mg/g). However, this antioxidant assays in POSF presented a positive correlation with β-glucans content. According to these results, there could be several food applications for these co-products, such as emulsifier stabilizer, sweetener or fortifier in the development of functional food.

Recognition, decoding and tracking of vortex patterns is of increasing importance in many fields reaching from astronomical observation of distant galaxies to turbulence phenomena in liquids or gases. Currently, coherent light beams with orbital angular momentum (OAM) are of particular interest for optical communication, metrology, micro-machining or particle manipulation. One common task is to identify characteristic spiral patterns in pixelated intensity maps at real-world signal-to-noise ratios. Recently, Fast Fourier Transform (FFT) was applied to the quantitative analysis of spiral interference patterns of OAM beams. Our study considers this approach in more detail. It is demonstrated that specific information can be extracted by combining conformal mapping by polar transform with determining one- or two-dimensional angular frequency spectra either in spatially fixed or scanning mode. Results of proof-of-principle experiments are presented.

The active form of fingolimod (FTY720; FT) is a sphingosine-1-phosphate receptor agonist with potential ocular applications. The goal of the present study was to develop an FT-loaded nanoemulsion (NE; FT-NE) formulation for the efficient and prolonged delivery of FT to the posterior segment of the eye through the topical route. FT-NE formulations were prepared with homogenization followed by probe sonication method. The lead FT-NE formulation (0.15% and 0.3% w/v loading), comprising soybean oil as lipid and Tween® 80 and Poloxamer 188 as surfactants, was further evaluated for in vitro release, surface morphology, filtration sterilization, and stability at refrigerated temperature. The formulation, at both dose levels, showed desirable physicochemical characteristics, a nearly spherical shape with homogenous nanometric size distribution, and was stable for 180 days (last time point checked) at refrigerated temperature post-filtration through polyethersulfone (0.22 µm) membrane. In vitro release studies showed prolonged release, compared with the control FT solution (FT-S), over 24 h. The results from these studies demonstrate that the FT-NE formulation can serve as a viable platform for the ocular delivery of FT through the topical route.

Located between Asia and Europe, Türkiye is very rich in terms of wild edible fruit diversity. One of the most important wild edible fruits in Türkiye is red raspberries and they widely found in cold to warm temperate regions in the country. The wild raspberries in general have red fruit color but yellow fruited genotypes are evident. A total of 11 wild grown red raspberry genotypes sampled in Northern Anatolia region was used in this study and their sensory, biochemical and antioxidant characteristics were determined. For sensory analysis aroma, taste and juiciness were used as the main criteria to compare ecotypes each other. Biochemical and antioxidant characteristics of ecotypes included SSC (Soluble Solid Content), vitamin C, organic acids, total anthocyanins (TA), total phenolic content, total flavonoid content and total antioxidant capacity. FRAP (Ferric Reducing Antioxidant Power) assay was used to determine antioxidant capacity. There were significant differences among ecotypes for most of the searched parameters even they found similar growing condition. The ecotypes had fruit weight between 1.04 g and 1.33 g, and fruit Chroma value between 26.11 and 33.70. Vitamin C content of ecotypes were quite variable and ranged from 29.3 mg/100 g to 41.4 mg/100 g. The total phenolic content, total anthocyanin content, total flavonoid content was between 164-362 mg gallic acid equivalent/100 g; 17.3-33.3 mg cyanidin-3-glucoside equivalent/100 g and 10.3-17.2 mg quercetin equivalent/100 g, respectively. Citric acid was the dominant organic acid for all genotypes and ranged from 10.3-14.6 g/100 g fresh weight base. According to the results V-4, V-8, V-3 and V-10 had attractive bigger fruits indicate their suitability for fresh consumption. V-3 and V-5 had sweeter fruits indicated their suitability for processing and V-6, V-7 and V-11 had richer for human health promoting compounds (higher total phenolic content and antioxidant capacity), making them suitable for future use as functional foods and as promising sources of natural antioxidants.

Expansins (EXPs) which are the essential components of plant cell wall function as relaxation factors to directly promote turgor-driven expansion of cell wall and control plant growth and development and diverse environmental stress responses. A lot of EXPs genes have been widely identified and characterized in numerous plant species, but not in sweetpotato. In the present study, a total of 59 EXPs genes that unevenly distributed onto 14 of 15 chromosomes were identified from sweetpotato genome, and segmental and tandem duplications were exhibited to act as dominant functions in IbEXPs diversity. Phylogenetic analysis exhibited that IbEXPs members were clustered into four subfamilies according to EXPs in Arabidopsis and rice and the regularity of motif, domain and gene structures was in accordance with the subfamily classification. The collinearity analysis between IbEXPs and related homologous sequences in 9 plants provided the phylogenetic insights of EXPs gene family. Cis-element analysis futhrer revealed the potential roles of IbEXPs in sweetpotato development and stress responses. Evidence from RNA-seq and qRT-PCR analysis of eight selected IbEXPs genes displayed their various tissue specificity in different tissues, and their transcripts were varyingly induced or suppressed under multiple hormone treatments (ABA, SA, JA and ACC) and abiotic stresses (low and high temperature). These results supply worthy foundations to further comprehensively investigate the exact functions of IbEXPs genes, and multiple members may function as promising regulators to control plant development and enhance the stress resistance of transgenic plants.

The Myb family of transcription factors (TFs) is a large and functionally diverse group found in all eukaryotes, but its role in fungi remains poorly understood. Here, we characterized a Myb family TF called MoMyb13 in the rice blast fungus, Magnaporthe oryzae. MoMyb13 has two Myb domains and has orthologues only in ascomycete fungi. Localization experiments confirmed that MoMyb13 is located in the nuclei, as expected for a TF. Phenotypic analysis showed that MoMyb13 mutants exhibited reduced growth, whitened colony appearance and no conidia formation. Importantly, these mutants completely lost pathogenicity, despite being able to form appressoria at their hyphae ends, suggesting that these appressoria were non-functional for causing infection. Furthermore, the mutant colonies lost hydrophobicity and had significantly reduced expression of the hydrophobin MPG1. However, overexpression of MPG1 in the mutants restored their hydrophobicity, but not pathogenicity. Stress assay showed that the mutants were more sensitive to SDS, CR and H2O2, but more tolerant to NaCl and SOR. In summary, our study revealed the essential role of the MoMyb13 in the growth, conidiation, hydrophobicity, stress response and pathogenicity of M. oryzae, and provides valuable insights into the working mechanism of Myb TFs in fungi.

This research presents a comprehensive bibliometric and sentiment analysis of nanocomposite literature from 1990 to 2024. Employing cutting-edge computational methods, the study delves deep into the progression of microstructural characterization, electrical properties, and mechanical behaviors of nanocomposites. The analysis utilizes advanced Boolean search strategies from the Scopus database, ensuring a thorough extraction of thematic content. The results explore various themes and insights, shedding light on trends evident in the Scopus database, particularly the prominence of research on nanocomposite microstructure, electrical attributes, and mechanical performance. The paper also offers textual analytics and bibliometric data, showcasing critical collaborative efforts and influential studies. Significant discoveries encompass the evolution of research language, shifts in thematic focus, and global contributions, providing a comprehensive perspective on the current landscape of nanocomposite research and its dynamic evolution. Moving forward, the "State-of-the-Art and Gaps Extracted from Results and Discussions" section of the paper delves into the most recent advancements in nanocomposite research. It delves into various types of nanocomposites, with a particular emphasis on their microstructural characteristics, electrical properties, mechanical dynamics, and the application of nanocomposite films. This section identifies key research themes, traces historical progress, and highlights emerging trends while underscoring the significance of collaboration and the influence of pivotal studies that have shaped the field. Lastly, in the "Literature Review Guided by Artificial Intelligence" section, the paper introduces a revised approach for researching nanocomposites through AI-guided techniques. This approach prioritizes articles published in 2023 based on citation frequency. Here, the focus is on exploring the relationship between nanocomposites and their electrical properties, emphasizing their fundamental interactions and impact on electrical characteristics. Various nanocomposite systems are covered, highlighting their composition, structure, and functionality. Findings from recent studies are integrated to provide a comprehensive overview of the current state of knowledge in this area. Notably, the sentiment analysis, anchored by an average sentiment score of 0.638771, underscores a positive trajectory in academic discourse, emphasizing the growing recognition of the potential of nanocomposites. The bibliometric exploration maps the intellectual domain, emphasizing pivotal research themes and the influence of crosslinking time on nanocomposite attributes. While this study is thorough, it acknowledges its limitations and advocates for broader database inclusion in future research endeavors. This work elucidates the prevailing trends in nanocomposite research, emphasizing the indispensable role of computational tools in comprehending this vast wealth of information.

Formaldehyde, sulfuric acid and salicylic acid were combined to create 3,3’-methylenebis[2-hydroxybenzoic acid] (MHB) ligand, which was subsequently permitted to bind with zinc ions. The ligand and its zinc (II) complex (Zn-MHB) have been described by a combination of elemental analyses, spectral (UV-Vis, IR, MS, NMR), XRD, TEM as well as TGA measurement. The ligand has been suggested to coordinate to the zinc center in tetradentate manner forming binuclear tetrahedral complex. An X-ray analysis indicated a considerable difference between MHB (crystalline) and Zn-MHB (amorphous). UV-Vis spectra were used to determine the optical properties such as bandgap, refractive index, optical conductivity and penetration depth. Possibility of employing the samples for optoelectronic applications was indicated from the band gap values which underlie the range of semiconductors. TEM revealed spherical shapes and mutation of ligand particles into nano-scale by complexation. The antimicrobial potential of the MHB towards gram-positive and negative bacterial growths has been investigated. The results suggested that it would be possible to employ MHB to stop bacterial development, particularly salmonella typhimurium. Cytotoxicity of the MHB was assessed against two types of mammalian cells: VERO (the kidney of an African green monkey) and HFB4 (human skin melanocytes). Lower sensitivity was observed in VERO cells.

This paper presents a novel approach to demonstrate the Collatz Conjecture, an unsolved problem in mathematics stating that all positive integers will eventually converge to 1 when subjected to a recursive sequence of operations. We introduce Algebraic Inverse Trees (AITs), innovative data structures that characterize relationships within the Collatz sequence by tracing inverse transformations back to the origin. Leveraging properties unveiled through this inverted representation, including absence of non-trivial cycles and guaranteed convergence of paths, we construct a topological framework to formally prove that all trajectories invariably lead to 1 under the Collatz iterative process. This modern technique provides not only the machinery to manifest a rigorous proof, but also grants intuitive insights into the deep complexity of this notorious yet elementary conjecture.

Recently, pharmaceutical research has been focused on the design of new antibacterial drugs with higher selectivity towards several strains. Major issues concern the possibility to obtain com-pounds with fewer side effects, at the same time effectively overcoming the problem of antimi-crobial resistance. Several solutions include the synthesis of new pharmacophores starting from piperazine or morpholine core units. Mass spectrometry-based techniques offer important sup-port for the structural characterization of newly synthesized compounds to design safer and more effective drugs for various medical conditions. Here, two new piperazine derivatives and four new morpholine derivatives were synthesized and structurally characterized through a combined approach of FT-ICR and LTQ mass spectrometry. The support of both high-resolution and low-resolution mass spectrometric data namely accurate mass measurements, isotopic distribu-tion and MSn spectra, was crucial to confirm the success of the synthesis. These compounds were further evaluated for inhibitory activity against a total of twenty-nine Gram-positive and Gram-negative bacteria to determine the action spectrum and the antimicrobial effectiveness. Results demonstrated compounds’ antimicrobial activity against many tested bacterial species, providing an inhibitory effect linked to different chemical structure and suggesting that the new-synthesized derivatives could be considered as promising antimicrobial agents.

Herein, we applied DNA Barcoding for the genetic characterization of Sideritis syriaca subsp. syriaca (Lamiaceae; threatened local Cretan endemic plant), using seven molecular markers of cpDNA. Five fertilization schemes were evaluated comparatively in a pilot cultivation in Crete. Chemical fertilizers (ChF), integrated nutrient management fertilizers (INM) and two biostimulants were utilized (foliar and soil application). Plant growth, leaf chlorophyll fluorescence and colour were assessed, and leaf content of chlorophyll, key antioxidants (carotenoids, flavonoids, phenols), and minerals were evaluat-ed. Fertilization regime did not affect leaf colour but induced distinct differences in leaf shape altering quality characteristics. INM-foliar and ChF-soil application promoted yield, without affecting tissue water content or biomass partitioning to inflorescences. ChF-foliar application was the most stimulato-ry treatment for enhanced antioxidant compound content, while INM-biostimulant was the least effec-tive one. In conclusion, adverse fertilization options appear as optimal when considering yield or anti-oxidant compound content. New DNA sequence datasets for the plastid regions of petB/petD, rpoC1, psbK-psbI and atpF/atpH have been deposited in the GenBank for S. syriaca subsp. syriaca while the mo-lecular markers rbcL, trnL/trnF, psbA/trnH were compared to those of another 15 Sideritis species re-trieved from the GenBank, constructing a phylogenetic tree to show their genetic relatedness.

This work studies the discontinuities features of sedimentary flysch materials in a 100 km2 area belonging to the Basque Arc. Such materials are common in this Spanish Alpine region located in the north of the Iberian Peninsula. A total of 33 outcrops are investigated by an intensive geotechnical investigation including geomechanical stations, boreholes and mechanical laboratory tests. Two flysch units are characterized: the Upper Aguinaga Formation or siliciclastic flysch, and the Lower Itziar Formation or calcareous flysch. Differences between both flysch formation are found. Joints in the siliciclastic flysch formation present an undulated roughness, with a spacing narrower and a persistence lower than in the calcareous flysch formation, which exhibits higher friction angles, although roughness is essentially planar. In addition, the potential of using Artificial Intelligence (AI) techniques, particularly Artificial Neural Networks and Support Vector Machine, to estimate the Geological Strength Index (GSI) from the Rock Quality Design (RQD) and some discontinuities features (spacing, persistence, aperture and roughness) is investigated. AI techniques are found to be satisfactory, being the Support Vector Machine with a linear kernel the technique which achieves the best performance.

Peptide/Histidine Transporter PHT1 (SLC15A4) is expressed in lysosomal membranes of immune cells where it plays an important role in metabolic and inflammatory signaling. PHT1 is an H+-coupled/histidine symporter that can transport a broad range of oligopeptides, including a variety of bacterial-derived peptides. Moreover, it enables the scaffolding of various metabolic signaling molecules and interacts with key regulatory elements of the immune response. Therefore, it is not surprising that PHT1 is associated with the development of autoimmune diseases, such as systemic lupus erythematosus (SLE). Unfortunately, the pharmacological development of PHT1 has been hampered by the lack of appropriate transport assays. With the aim to address this shortcoming, a novel transport assay based on solid supported membrane-based electrophysiology (SSME) is presented. Key findings of the present SSME studies include the first recordings of electrophysiological properties, a pH dependence analysis, an assessment of PHT1 substrate selectivity, as well as the transport kinetics of the identified substrates. In contrast to previous works, PHT1 is studied its native lysosomal environment. Moreover, observed substrate selectivity is validated by molecular docking. Overall, this new SSME-based assay is expected to contribute to unlock the pharmacological potential of PHT1 and to deepen the understanding of its functional properties.

In the realm of virtual and augmented reality (VR/AR) and teleoperation applications, haptic feedback plays a role in enhancing task performance. One of the main goals of this study is to simplify haptic device hardware while improving its capacity to provide various stimuli at different intensities. In response to these challenges, this research introduces the Pneumatic Unit Cell (PUC), a soft-pneumatically driven device—a hollow silicone cylinder with the ability to provide both static pressure and vibrotactile feedback. Furthermore, Pneumatic Unit Cell's design simplicity has the potential for scalability, modularity, and the flexibility to mount the device on any part of the human body. The focus of the current paper is to study PUCs as an actuator and lay the foundation for future perceptual studies. The characterization studies encompass fabrication and verification of fabrication accuracy through dimensional measurements, characterizing PUCs under static pressure conditions (measuring free deflection and blocking force), and frequency conditions (measuring free deflection). In the static pressure conditions, we applied pressures ranging from 0 to 40 KPa to measure free deflection and from 0 to 30 KPa to measure blocking force. In the frequency conditions, we applied pressures of 10, 20, and 30 KPa, with inflation/deflation rates varying between 0.5 Hz and 100 Hz. The measurements of free deflection under static pressure conditions revealed that 0.9 mm and 1.2 mm PUCs exhibit a linear increase of free deflection with increase in inflation pressure. The results of free deflection measurements under the frequency conditions indicate a direct relationship between free deflection magnitude and applied pressure. The results also demonstrate an inverse relationship to the frequency of inflation/deflation. The characterization results demonstrate a broad range of free deflection observed under both static pressure and frequency conditions, encouraging the potential application of Pneumatic Unit Cell actuators as haptic devices.

PPR is a highly contagious viral disease and one of the deadliest affecting wild goats, sheep and small ruminants, however goats are generally more sensitive. The causative agent is the Peste des Petits Ruminants virus (PPRv) which is a single-stranded RNA virus of negative polarity belonging to the Paramyxoviridae family. In February 2020, an active outbreak of PPR was re-ported in a herd of a transhumant farmer in the village of Ngainth Pathé (department of Kounguel, Kaffrine region,Senegal). Of the ten (10) swabs collected from goats, eight (8) came back positive by real-time PCR. The most positive sample was amplified, purified and amplicon sent for sequencing. Phylogenetic analysis showed that the sequence of the PPR virus obtained belonged to lineage IV. These results confirm those found in the latter countries and reinforce the hypothesis of the importance of animal mobility between these neighboring countries. In perspective, following the discovery of this lineage IV in Senegal, a study on its dispersion is underway throughout the national territory. The results that will emerge from this study, asso-ciated with detailed data on animal movements and epidemiological data, will provide appro-priate and effective information to improve PPR surveillance and control strategies with a view to its eradication.

Jalapeño peppers (Capsicum annuum L.) are an important agricultural product worldwide. Despite its high demand in recent years, there are few studies on its production under adverse conditions caused by environmental phenomena. Crops in protected environments such as aeroponics offer greater control of these phenomena and enable efficient use of resources. However, it is necessary to validate the cultivation technique for which new technologies are being used. One of these is the analysis of images captured in the visible and near and far infrared spectrum which involves using non-invasive techniques in order to characterize the growth of a plant and diagnose if it presents any type of stress. This study presents the characterization of vegetative growth and fruiting of jalapeño pepper plants in an aeroponic system, where the root, leaf development parameters and fruits were measured in four jalapeño pepper crops through images of plants captured in the visible (VIS), near infrared (NIR) and far infrared (IR) spectrums. Four crops of thirty jalapeño pepper plants were sown to obtain a total of one hundred and twenty plants which were characterized in the different phases of growth and fruiting. Each of the four jalapeño pepper crops were monitored for sixty days in an aeroponic system in a greenhouse. The first crop was intended to carry out tests to establish the appropriate fertigation times, the next three crops were grown under favorable conditions. Algorithms were developed in Matlab to obtain, over ten image capture sessions, the morphometric and thermal parameters of the roots (perimeter, area, length and average temperature), plants (perimeter, area, height and average temperature), and fruiting. (yield and number of fruits). The statistical analysis was carried out using the ANOVA and Tukey tests considering a value of p ≤ 0.05. The results obtained indicate that there is no significant difference between the characterizations of the four crops. This statement is also supported by the visual analysis of the growth curves parameters of the four crops. In addition, the temperature inside the aeroponic system was contrasted with the ambient temperature and it was verified that the temperature to which the roots are exposed was in the range of 10°C – 20°C. The thermal analysis determined that a plant that presents water stress and is also exposed to high temperatures has an average leaf temperature of 3.7 to 5 °C above the optimal condition for the plant, while a plant with stress at normal temperatures was 1.3 °C higher than the plant without stress.

The structure characterization of two new polysaccharides from Agrocybe aegerita (AA-P) and Hygrophorus olivaceoalbus (HO-P) by HPGPC, GC-MS, NMR and FT-IR indicated that AA-P was composed of Galactose, Glucose and Arabinose, in the ratio of 3:2:1. Its skeleton structure was consisted of (1→4)-Arap, (1→4,6)-Glup and (1→6)-Galp with one branched chain. The HO-P was consisted of mannose, galactose and glucose in a ratio of 1:1:2. Its skeleton structure was consisted of (1→6)-Galactose residues, (→1)-glucose residues, (1→4)-glucose residues and (1→4,6)-D-mannose residues. There were two branched chains connected to the main chain. AA-P and HO-P had the best stimulation effect on B cells and RAW264.7 cells, respectively, and could both mainly by impacting and reducing G0/G1 phase which lead to a significant proliferation of B cells, T cells and RAW264.7 cells. In addition, AA-P and HO-P could significantly promote the secretion of TNF-α from T cells, the secretion of IgA, IgD, IgE, IgG and IgM from B cells, and the secretion of TNF-α from RAW264.7 cells, but neither of them could impact the secretion of IL-1β from RAW264.7 cells.

A La2FeCrO6 (LFCO) double perovskite powders were synthesized by hydrothermal method, which crystallized in an orthorhombic (Pnma) structure and exhibited a spherical morphology with average particle size of 900 nm. Fourier transformation infrared spectroscopy confirmed the octahedral coordination of Fe and Cr ions in the powders. XPS spectra revealed dual oxide states of Fe (Fe2+/Fe3+) and Cr (Cr3+/Cr4+) elements, and oxygen element appeared as lattice oxygen and defect oxygen, respectively. The LFCO powders exhibit ferromagnetic behavior at 5 K with saturation magnetization of 0.31 μB/f.u., coercive field of 8.0 kOe, and Curie temperature of 200 K. Griffiths phase appeared in the powders between 200 K and 223 K. The LFCO ceramics displayed a butterfly-like magnetoresistance (MR)-magnetic field (H) curve at 5 K with MR (5 K, 6 T) value of -4.07%. Temperature dependence of resistivity of the LFCO ceramics demonstrated their semiconducting nature. Electrical transport data were fitted by different conduction models. Strong frequency dispersion dielectric behavior was observed in the LFCO ceramics. A dielectric abnormality observed around 260 K, was ascribed to the jumping of electrons trapped in shallow levels created by oxygen vacancies. The dielectric relaxation behavior exhibited by dielectric loss between 160 K and 260 K, was contributed to the singly-ionized oxygen vacancies.

Microplastics (MPs) pollution has become a persisting problem over the last decades and a critical issue for environmental protection and human health. In this context any scientific data able to reveal the MPs presence and to improve the characterization and identification in different systems is valuable. The aim of this paper was to assess available techniques for determining MPs in real freshwater samples and subsequently to highlight the occurrence and type of MPs in the study case area (Somesul Mic River). The specific objectives of the study were: i) MPs separation and visual characterization; ii) microscopic analyses and morphological characterization of MPs; iii) Raman and FT-IR spectroscopic identification of MPs. MPs sampling was performed from the fresh water and sediment using planktonic nets and sieves with different mesh sizes (20 to 500µm). After digestion with hydrogen peroxide, the MPs characterization was performed using both classical microscopic techniques as well as scanning electron microscopy (SEM). For the MPs identification, Raman and FT-IR spectrometry techniques were used. Large (1-5 mm) and small (1 µm to 1 mm) MPs were observed in the shape of fibers, fragments, foam, foils and spheres in various colors (red, green, blue, purple, pink, white, black, transparent, opaque). Polymers were identified related to scientific literature and reference spectra. The presence of polyethylene (PE), polypropylene (PP) and polystyrene (PS) was registered for all sampling point. The MPs laboratory investigations have raised some issues regarding the identification of MPs particles with the size smaller than 500µm, being characterized especially under microscope. Small MPs particle dispersed on cellulose filter were identified using micro-Raman spectroscopy highlighting the same type of polymers. The results showed that both spectrometric methods Raman or FT-IR confirm the identification of the same type of polymers. No differences were registered between the sampling points due to the widespread presence of MPs. The sediments samples presented a greater abundance compared to the water samples. Overall, it is necessary to continue the optimization of the MPs separation protocol and identification according to the complexity of samples, mainly due to the limitation and lack of spectral databases.

Tumors are complex tissues of malignant cells surrounded by a diverse cellular micro-environment with which they interact. The molecular and cellular underpinnings of cancer cells have been increasingly understood during the last few decades. Nonetheless, a great deal remains unknown regarding the ways in which tumour cells modify their surroundings and impact the organisation and makeup of cells. This review aims to concentrate on recent advancements in molecular characterization of tumor cells and its immunology, provides recent and general insight into cancer immunity and immunotherapy, and discusses the immunobiology of human adaptive and innate immunity to malignant growth of cancer cells, the mechanisms that support human immune response from beneath, an up-to-date scientific development to cancer immunotherapy, and how tumor and host responses can Encircle as a military tactic effective anti-cancer immunity.

Diamond-like carbon (DLC) films have a promising tribological application in green precision manufacturing, but their toughness represents a serious issue in the way of their application perspective. The film thickness is on the micrometer scale and makes conventional methods unsuitable for its toughness characterization. The absence of an accepted method for characterizing the DLC toughness has hindered the related research on the development of toughening methods and understanding the mechanism. This work intends to explore a relatively simple and acceptable characterization method to measure the film toughness. Moreover, toughening mechanisms of DLC films are proposed during the characterization to reveal the toughening mechanism. The toughness can be fully characterized through combining impact toughness and scratch toughness. The impact toughness can be obtained by observing the size of the indentation and the crack state around the indentation in the impact experiment. The scratch toughness could be assessed by combining the scratch morphology and Crack Propagation Resistance (CPRS). The improvement of film toughness should be carried out from two aspects: preventing microcrack initiation and suppressing crack propagation. Appropriate doping of non-carbide metal particles can effectively improve the toughness of the film, and there are seven main factors affecting the toughening of the film. Five toughening mechanisms of non-carbide metals from film preparation to test stage are revealed during the investigation of the change patterns.

Biodegradable and renewable plastic films have been regarded as promising alternative green materials to achieve the substitution polythene (PE)films to reduce plastic pollution. Poly (butylene adipate-co-terephthalate) (PBAT) is a kind of biodegradable polyester, which is widely used in the production of biodegradable mulching films. However, the high cost of PBAT limited it applications. Thus, lignin, one of the most abundant biomass resources was incorporated into PBAT matrix in the present work. A series of Lignin/PBAT biodegradable plastics films with different Lignin/PBAT weight ratios (0.00 %-5.00 %) were successfully fabricated using twin screw and twin roll extruders. The chemical compositions, morphologies, thermal stabilities, mechanical properties, and barrier properties of samples were characterized by XRD, FTIR, TG/DSC, mechanical testing machine, and WVTR, respectively. Results show that the corporation of lignin into PBAT matrix could lead to improved thermal stabilities, mechanical properties and barrier properties of films even after Xenon lamp aging process, especially when Lignin/PBAT weight ratio is 1.00 % in the present work. This work provides a very promising approach for fabrication of biodegradable plastics films with low cost, enhanced mechanical properties and barrier properties, the as-prepared samples may have potential applications in agricultural or food packaging materials.

At the beginning of 2019, the petroleum crisis impacted many economies dependent on this industry. The Mexican government started programs to identify points and government officials involved in the gasoline stealing from PEMEX (Petróleos Mexicanos), the country’s leading government petroleum company. The programs consisted of supervising and monitoring the Mexican country network of gasoline ducts to detect points where gasoline was being stolen. Consequently, large urban regions faced a lack and shortage of gasoline. This situation generated several reactions in social media and many open data in news media. Although the government provided open data about stealing gasoline locations related to crimes, it did not analyze the collected data to identify patterns, insights, and the spatio-temporal characterization of this phenomenon. This paper presents a study to deal with the regional semantics described in the social media locations of gasoline stealing. Thus, a framework to discover the trends that emerge from social media and how it is correlated with the government’s open data is also presented—the proposed methodology used machine learning techniques based on linguistic and semantic technologies. The analysis was applied to a dataset of 24,317 geo-referenced tweets. The obtained results reflected the Mexican thinking opinion regarding discovered social topics, polarization maps, and regional insights. According to discovered trends, there were long fuel lines between 1.5 and 5 kilometers (on average) at fuel stations in different Mexican states.

In the FCC conversion of heavy petroleum fractions as atmospheric residues, the main challenge for refiners to achieve the quantity and quality of various commercial products depends essentially on the catalyst used in the process. A deep characterization of the catalyst at different steps of the process (fresh, regenerated, and spent catalyst) was investigated to study the catalyst's behavior including the physicochemical evolution, the deactivation factor, and kinetic-thermodynamic parameters. All samples have been characterized by various spectroscopy methods such as N2 adsorption-desorption, UV-visible spectroscopy, Raman spectroscopy, LECO carbon analysis, Scanning electron microscopy (SEM), X-ray diffraction (XRD), X‐ray fluorescence (XRF), nuclear magnetic resonance spectroscopy (NMR13C) analysis, and Thermogravimetric analysis. The results of N2 adsorption-desorption, UV-vis, Raman, LECO carbon, and SEM images showed that the main causes of catalyst deactivation and coking were the deposition of carbon species that covered the active sites and clogged the pores, and the attrition factor due to thermal conditions and poisonous metals. The XRD and XRF results showed the catalyst’s physicochemical evolution during the process and the different interlinks between catalyst and feedstock (Nickel, Vanadium, Sulfur, and Iron) elements which should be responsible for the coking and catalyst attrition factor. It has been found that, in addition to the temperature, the residence time of the catalyst in the process also has an influence on catalyst structure transformation. NMR13C analysis revealed that polyaromatic hydrocarbon is the main component in the deposited coke of the spent catalyst. Thermogravimetric analysis showed that the order of catalyst mass loss was fresh > regenerated > spent catalyst due to the progressive losses of the hydroxyl bonds (OH) and the structure change along the catalyst thermal treatment. Moreover, the kinetic and thermodynamic parameters showed that all zones are non-spontaneous endothermic reactions.

Xaa-Pro dipeptidase (XPD, EC 3.4.13.9; also known as prolidase) catalyzes the hydrolysis of iminopeptide bond in the trans Xaa-Pro dipeptides (Xaa represents any amino acid except proline), which makes it find wide applications in food, medical and environmental protection fields. In the present study, a novel Xaa-Pro dipeptidase from Aspergillus phoenicis ATCC 14332 (ApXPD) was molecularly and biochemically characterized. Reclassification based on phylogenetic analysis and version 12.5 MEROPS database showed that this enzyme was the only fungal XPD in the unassigned subfamily which shared the highest sequence similarity with Xanthomonas campestris prolidase but not with that from the more related fungal species A. niudulans. As compared with other prolidases, ApXPD also contained an N-terminal tail (residues 81-89) and an additional region (PAPARLREKL), and used a different arginine residue for dipeptide selectivity. After heterologous expression and partial purification, recombinant ApXPD was highly active and stable over the alkaline range from 8.5 to 10.0, with a maximum activity at pH 9.0 and more than 80% activity retained after 1-h incubation at pHs of 8.5-10.0 (55oC). It also had an apparent optimum temperature of 55oC and remained stable at 20-30oC. Moreover, this enzyme was a cobalt dependent prolidase that only cleaved dipeptides Lys-Pro, Gly-Pro and Ala-Pro rather than other dipeptides, tripeptides and tetrapeptides. All these distinct features make A. phoenicis ATCC 14332 XPD unique among currently known prolidases, thus defining a novel Xaa-Pro dipeptidase subfamily.

The article presents a method for obtaining new composites using a well-known mineral, expanded perlite (EP), and an industrial polymer, butadiene rubber (BR). For the design of composites, a joint oxidative chlorophosphorylation reaction of BR and EP (as well as BR and modified EP) was carried out, and the modifications obtained from this reaction were further hydrolyzed. The structure and morphology of the obtained samples were characterized in detail using Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray powder diffraction, as well as scanning electron microscopy, and energy-dispersive X-ray analysis. EP and BR were separately modified with a similar reaction and characterized for data interpretation.

Grape pomace is a byproduct of wineries and sustainable source of bioactive phenolic compounds. Encapsulation of phenolics with a well-chosen coating may be a promising means of delivering them to the intestine, where they can then be absorbed and exert their health-promoting properties. Ionic gelation of grape pomace extract with natural coatings (sodium alginate and its combination with maltodextrins, gelatin, chitosan, tragacanth gum, and gum arabic) was performed, and the resulting hydrogel microbeads were then air-, vacuum-, or freeze-dried to prevent their spoilage. The physicochemical characterization (size, shape, texture, and morphology) of the microbeads and the in vitro release of phenols from microbeads were studied and a good relationship between them was established. Freeze-dried microbeads showed the highest cumulative release of phenols as in the intestinal phase (23.31 – 43.27 mgGAE/gMB), followed by vacuum-dried (23.31 - 35.41 mgGAE/gMB) and air-dried (22.74 – 31.38 mgGAE/gMB), while the most suitable release dynamics in the intestinal phase were observed for alginate-based microbeads combined with gelatin (58.4 %), gum arabic (34 %) and 1.5 % w/v chitosan (15.3 %). The results highlight the importance of developing encapsulated formulations containing a natural source of bioactive compounds that can be used in various functional foods and pharmaceutical products.

(1) Background: In Eugenia Stipitata Mac Vaugh (Arazá), there is an abundance of flavonoids, carotenoids, and phenolic acids, which are bioactive compounds with antioxidant, anticarcinogenic, antimicrobial, anti-inflammatory, antispasmodic, antiulcer, and cardiovascular disease prevention benefits. Therefore, the aim of this review is to compile the compounds that have been identified in the fruit and gather information about secondary metabolites to establish their potential preventive and therapeutic effects; (2) Methods: a literature search was conducted in repositories and databases such as Science Direct, Scopus, PubMed, Web of Science, Agriculture Collection Gale, SAGE, OXFORD University, DOAJ, among others. Articles identifying and quantifying bioactive compounds present in Arazá were included; (3) Results: Five studies meeting the inclusion criteria were incorporated, resulting in the compilation of 82 compounds, of which 24 were identified and quantified, while 58 were solely identified. This review was able to identify and report the concentration, and in some cases, the quantity, of phenolic compounds with antioxidant and anti-inflammatory capabilities present in Arazá; (4) Conclusions: With this scope, it was possible to obtain a more comprehensive understanding of the fruit's potential to potentially enhance health aspects, thereby providing greater prominence and added value to this product, allowing for more frequent inclusion in the diets of consumers, and even enabling exportation.

Sracocystis cruzi in cattle (Bos taurus) and Sarcocystis poephagicanis in yaks (Bos grunniens) are morphologically indistinguishable. However, the relationship of the two parasites is still un-clear. Here, muscular tissues of the two domestic animals collected from abattoirs in China were examined for sarcocysts of S. cruzi and S. poephagicanis. The sarcocysts isolated from the samples were processed for light microscopy (LM), transmission electron microscopy (TEM), and DNA analysis. Sarcocysts of S. cruzi and S. poephagicanis were found in 405 of 950 (42.6%) cattle and 304 of 320 (95.0%) yaks, respectively. By LM and TEM, the sarcocysts of the two parasites showed similar morphologically characteristics. The thin-walled sarcocysts had hair-like protrusions on the surface. Ultrastructures exhibited the primary cyst wall contained irregularly folded, hirsute or bone-like protrusions. Four genetic markers, 18S rDNA, 28S rDNA, mitochondrial cox1, and apicoplast rpl6 of the two parasites were sequenced and analyzed. The sequences of the four loci presented an interspecific identity of 97.9−98.6%, 97.2−98.1%, 89.5−90.4%, and 96.9−97.2%, respec-tively. Phylogenetic analysis using 28S rDNA and cox1 sequences indicated that both species were placed into a group encompassing Sarcocystis spp. in ruminants with canid as known or putative definitive hosts. Sarcocystis cruzi and S. poephagicanis should represent separated species, and cox1 and rpl6 was suitable for distinguishing between them.

In this study, multi-layer ceramic capacitors (MLCCs) detached from lighting sector's waste electrical-electronic equipment (WEEE) are characterised for the presence of rare earth elements (REEs) and precious metals (PMs). Their digestion was carried out with HNO3 & aqua regia on a heating plate and characterised with the use of inductively coupled plasma optical emission spectroscopy (ICP-OES) & scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX). The contents of REEs and PMs are 0.84 wt% and 0.60 wt%, respectively, and create an economic stored value in MLCCs that is essentially defined by PMs of 98.67% and by Pd 78.37%. The content of the main elements is: Nd 0.366 wt%, Y 0.220 wt%, Dy 0.131 wt%, Ag 0.467 wt%, and Pd 0.105 wt%. The results confirm the need of selective removal and separate recycling process of MLCCs from WEEE drivers.

Electrocatalytic and photocatalytic hydrogen evolution reaction (HER) provides a promising approach to clean energy generation. Bimetallic single-atom catalysts raised and have been explored to be advanced catalysts for HER. It is urgent to review and summarize the recent advances in developing bimetallic single-atom HER catalysts. Firstly, the fundamentals of bimetallic single-atom catalysts are presented, highlighting their unique configuration of two isolated metal atoms on supports and resultant synergistic effects. Secondly, recent advances in bimetallic single-atom catalysts for electrocatalytic HER under acidic/alkaline conditions are then reviewed, including W-Mo, Ru-Bi, Ni-Fe, Co-Ag, and other dual-atom systems on graphene and transition metal dichalcogenides (TMDs) with enhanced HER activity versus monometallic analogs due to geometric and electronic synergies. Then, Photocatalytic bimetallic single-atom catalysts on semiconducting carbon nitrides for solar H2 production are also discussed. Finally, an outlook is provided on opportunities and challenges in precisely controlling bimetallic single-atom catalyst synthesis and gaining in-depth mechanistic insights into bimetallic interactions.

Background: Prostate cancer is a global health concern, necessitating ongoing research to enhance our comprehension of its molecular foundations and develop more efficacious therapeutic approaches. Among the emerging protagonists in this arena is Speckle-type POZ (pox virus and zinc finger protein) (SPOP), an E3 ubiquitin ligase substrate adaptor protein. SPOP's recent ascent to prominence in prostate cancer research is attributed to its crucial role in regulating the Androgen Receptor (AR) signaling pathway. This systematic review aims to provide a comprehensive synthesis of existing knowledge concerning SPOP mutations in prostate cancer. It seeks to elucidate their significance in characterizing the disease and their potential as therapeutic targets. Methods: A systematic literature search was conducted in multiple databases, including PubMed, Web of science, Scopus and google scholar to identify relevant studies published up to September 2023. Eligible studies included investigations of SPOP mutations in prostate cancer and their implications. Data extraction, quality assessment, and synthesis were performed in conformity to the PRISMA guidelines. Results: The review revealed that SPOP mutations are recurrent events in prostate cancer, with a notable prevalence in specific molecular subtypes. These mutations primarily affect the MATH domain of SPOP, disrupting its substrate recognition function. Notably, SPOP mutations have profound consequences on the AR signaling pathway, leading to increased AR protein stability and transcriptional activity. The clinical implications of SPOP mutations remain diverse, with varying associations with prognostic outcomes. Conclusion: SPOP mutations represent a significant facet of prostate cancer biology, influencing disease heterogeneity and clinical behavior. While their precise prognostic significance is evolving, their functional impact on the AR pathway highlights their potential as therapeutic targets. This systematic review provides a comprehensive overview of SPOP mutations in prostate cancer, contributing to our understanding of the disease's molecular landscape and therapeutic avenues.

Abrstract: Bacillus spp. it is a genus that is used to biocontrol post-harvest diseases in various vegetables and fruits during transportation and storage. It suppresses the development of pathogens such as gray mold (Botrytis cinerea) in strawberry cultivation. In this work, the molecular characterization of Bacillus spp. species was carried out. in three cities in Peru: Huaura, Chanchamayo and Cañete. The samples were collected from rhizospheric soil from crop areas, subsequently processed for microbiological isolation, molecular analysis using the 16S rRNA gene and bioinformatic analysis. In total, 14 strains were obtained where they were identified with a minimum of 92.05% and a maximum of 100% similarity: 8 strains of Bacillus subtilis, 4 strains of Bacillus licheniformis, 1 strain of Bacillus paralicheniformis and 1 strain of Bacillus cereus, all the strains were related by constructing a phylogenetic tree.

A complete model was developed to simulate the behavior of a circular clamped axisymmetric fluid-coupled Piezoelectric Micromachined Ultrasonic Transducer (PMUT). Combining Finite Difference and Boundary Element Matrix (FD-BEM), this model is based on the discretization of the partial differential equation used to translate the mechanical behavior of a PMUT. In the model, both the axial and the transverse displacements are preserved in the equation of motion and used to properly define the neutral line position. To introduce fluid coupling, a Green’s function dedicated to axisymmetric circular radiating sources is employed. The resolution of the behavioral equations is used to establish the equivalent electroacoustic circuit of a PMUT that preserves the average particular velocity, the mechanical power, and the acoustic power. Particular consideration is given to verifying the validity of certain assumptions that are usually made across various steps of previously reported analytical models. In this framework, the advantages of the membrane discretization performed in the FD-BEM model are highlighted through accurate simulations of the first vibration mode and especially the cutoff frequency that many other models do not predict. This high cutoff frequency corresponds to cases where the spatial average velocity of the plate is null and is of great importance for PMUT design because it defines the upper limit above which the device is considered to be mechanically blocked. These modeling results are compared with electrical and dynamic membrane displacement measurements of AlN-based PMUTs in air and fluid. This complete PMUT model using the FD-BEM approach is shown to be very efficient in terms of computation time and accuracy.

L-asparaginase from bacterial sources have been used in antineoplastic treatments and the food industry. A novel type II L-a sparaginase encoded by the N-truncated gene ansZP21 of halotolerant Bacillus subtilis CH11 isolated from Chilca salterns in Peru was expressed using a heterologous system in Escherichia coli BL21 (DE3)pLysS. The recombinant protein was purified using one-step nickel affinity chromatography and exhibited activity of 234.38 U mg-1 and a maximum catalytic activity at pH 9.0 and 60 °C. The enzyme shows a homotetrameric form with an estimated molecular weight of 155 kDa by gel filtration chromatography. The enzyme half-life at 60 °C was 3 h 48 min, and L-asparaginase retained 50% of initial activity for 24 h at 37 °C. The activity was considerably enhanced by KCl, CaCl2, MgCl2, mercaptoethanol, and DL-dithiothreitol (p-value < 0.01). Moreover, the Vmax and Km were 145.2 µmol mL-1 min-1 and 4.752 mM, respectively. These findings evidence a promising novel type II L-asparaginase for future industrial applications.

Avipoxvirus (APV), a linear dsDNA virus belonging to the subfamily Chordopoxvirinae of the family Poxviridae, infects more than 278 species of domestic and wild birds. It is responsible for causing the avian pox disease, which is characterized by its cutaneous and diphtheric forms. With a high transmission capacity, it can cause high economic losses and damage to the ecosys-tem. Several diagnostic methods are available and vaccination of birds can be an effective pre-ventive measure. To update the molecular characterization and phylogenetic analysis of viruses isolated in Portugal between 2017 and 2023, ten APV-positive samples were analyzed. A P4b gene fragment was amplified by PCR and the nucleotide sequence of the amplicons was deter-mined by Sanger sequencing. The sequences obtained were aligned using ClustalW, and a max-imum likelihood phylogenetic tree was constructed. With this study, it was possible to verify that the analyzed sequences are distributed in subclades A1, A2, B1, and B3. Since some of them are quite similar to others from different countries and obtained in different years, it is possible to conclude that there have been several viral introductions in Portugal. Finally, it was possible to successfully update the data on avipoxviruses in Portugal.

This comprehensive review addresses topics relevant to understanding of characterization of antimicrobial coatings used in surface modifications of yarns and materials intended for usage in medical and dental applications. These coatings are created using various physical and chemical methods to achieve efficient, homogeneous, and uniform layers on different surfaces and materials, with the goal of imparting antimicrobial and/or antiviral properties. Antimicrobial coatings must contain active compounds effective against various microorganisms, including those resistant to antibiotics. Examples of such compounds include metallic nanoparticles (such as silver, copper, and gold) and nanoparticles of metal oxides (such as zinc, titanium, and aluminum). Once materials intended for medical applications are coated, they undergo extensive testing and characterization, for which the methodologies will be presented in this chapter. Despite their wide efficiency in medical applications, concerns are raised regarding the potential toxicity of nanoparticles to living organisms. Therefore, the development of novel legal frameworks is anticipated, which will depend on proper characterization and testing procedures. This paper provides a summary of the current state-of-the-art methodologies for characterizing nanoparticles in antimicrobial coatings on materials with different roughness and structures and specifies the problems related with accumulation of antimicrobial nanoparticles in a human body.

Canistel (Pouteria campechiana (Kunth) Baehni) (yellow sapote, canistel). Originally from Mexico, the fruit is edible, and the tree is used as an ornamental and medicinal plant. Descriptive studies were carried out with the objective of morphologically characterizing the fruits and leaves of trees located in different regions of Mexico to select outstanding specimens and propose their massive reproduction. The trees were selected in three zones. In zone 2 from flower anthesis to harvest 11 months, fruits with 3 seeds, greater weight (180 to 330 g) and quantity of pulp (198.88 g), subglobose shape, total soluble solids 33 %. The fruits of zone 1 at harvest 8 months and zone 3 took 9 months to be harvested, in the rest of the characteristics evaluated were exceeded by the fruits of zone 2. To characterize the canistel (P. campechiana) leaf and identify accessions or cultivars, the three main variables, according to the principal component analysis were: leaf area, perimeter, and minor diameter. The three zones where canistel fruits and leaves were characterized are important and can be recommended for propagation in zones with favorable climatic conditions for fruiting in tropical and subtropical regions of Mexico.

This study investigates the contribution of nano-alumina (nA: 1-3wt.% binder) to the performance of silica fume (SF-10%) blended mortar in ternary blended mortar. The fresh (workability, setting time) and hardened properties (compressive strength and thermal resistance (300 °C for 1 h)), were examined. Nano alumina (nA) contributed positively to the consistency of SF blended mortar such that similar workability could be achieved with OPC when 3% nA was added. The initial and final setting time of 180 and 220 mins were recorded in SF blended mortar and reduced by 18.4 and 21.8%, respectively by adding 3%nA. The optimum mixture that contained 10%SF and 2%nA had 3-d and 28-d compressive strengths of 28 and 43.2 MPa. In the absence of nA, this reduced by 14.3% and 29.4% while it reduced by 25.2% and 16.7%, respectively in OPC mortar. The main products characterizing SF-nA ternary blended binder with dense microstructural density were nepheline and tobermorite. Besides, it is more susceptible to carbonation despite its superior performance in thermal resistance when compared to SF blended and OPC mortars.

Lucky bamboo (Dracaena sanderiana hort. ex Mast. = Dracaena braunii) is a domestic species widely cultivated for ornamental purposes in China. In March 2022, a severe occurrence of anthracnose disease was observed on the stems of lucky bamboo plants in a greenery retail store located in Nanjing, Jiangsu Province, China. The morphological characteristics of isolates obtained from diseased stem tissues were identical with those described for Colletotrichum species. Based on multilocus phylogenetic analysis with the internal transcribed spacer (ITS), actin (ACT) gene, and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) gene, the pathogen was identified as Colleto-trichum gloeosporioides (Penz.) Penz. & Sacc. Pathogenicity was verified by mycelial plug-inoculating stem cuttings of one-year-old lucky bamboo plants and spray-inoculating whole one-year-old lucky bamboo plants, respectively. Koch’s postulates were fulfilled by the re-isolation of C. gloeosporioides from symptomatic tissues. To the best of our knowledge, this report describes the first time that C. gloeosporioides was observed to cause anthracnose on lucky bamboo in China.

In Benin, Xanthomonas oryzae pv. oryzae (Xoo) causing bacterial blight (BLB) was first described in 2013 on wild rice Oryza longistaminata. No studies have been conducted on Beninese Xoo strains and resistant rice varieties. The aim of this study is to check whether Xoo has already spread to cultivated varieties and to screen some rice accessions for the main resistance genes detection. To achieve this aim, rice leaves showing typical BLB symptoms were collected from various rice fields in Benin and analyzed by PCR to identify Xoo-specific sequences. In addition, seventy-five rice accessions were examined to identify Xoo resistance genes. The results showed that Xanthomonas oryzae (Xo) had been identified in Banikouara and Malanville. In addition, Sphingomonas sp was detected in several rice fields. A Xo-Sphingomonas Sp co-infection was also noted. 47 of 75 rice accessions examined (62.66%) carried Xoo resistance genes with 3 (4%) and 40 (53.33%) of xa5 and Xa21 respectively. None of the accessions had neither Xa7 nor Xa13 resistance genes. Three accessions had both xa5 and Xa21 genes. In addition, the rice isogenic lines IRBB60 and IRBB21used as positive controls, were found to be susceptible. These results indicate that Xo has evolved from a wild rice to cultivated varieties in northern Benin. Consequently, a varietal improvement program must be implemented with varieties having resistance genes to prevent a BLB pandemic in Benin.

Cyanobacteria are promising organisms for the sustainable production of various biotechnologi-cal interesting products. Due to their energy production via photosynthesis, the cultivation of cyanobacteria expands the CO2 cycle. Most cyanobacteria form biofilms on surfaces in their natu-ral environment by surrounding the cells with a self-produced matrix of extracellular polymeric substances (EPS) that hold the cells together. These special growth properties need special reac-tors for cultivation. By immobilizing cyanobacteria on carriers, systems currently established in industry could also be used for biofilm formers. Various artificial carriers for immobilized growth of cyanobacteria and microalgae have already been described in the literature. However, the use of waste materials or natural biodegradable carriers would be more sustainable and is, therefore, the focus of this study. Dried Luffa cylindrica, zeolite, and corn stalks were investigated for their use as carriers for cyanobacteria. L. cylindrica was shown to be an excellent natural carrier for (i) Anabaena cylindrica (ii) Nostoc muscorum 1453-12a, and (III) Nostoc muscorum 1453-12b. Higher or at least similar growth rates were achieved when cyanobacteria were cultivated with L. cylindrica compared to submerged cultivation. Additionally, the production of EPS and C-phycocyanin was increased at least 1.4-fold in all strains by culturing on L. cylindrica. The improved growth could be explained on the one hand by the high surface area of L. cylindrica and its properties, and on the other hand by the release of growth-promoting nutrients from L. cylindrica to the medium.

The smart management of water resources is an increasingly important topic in today's society. In this context, the paradigm of Smart Water Grids (SWGs) aims at a constant monitoring through a network of smart nodes deployed over the water distribution infrastructure. In such a way, a continuous assessment of water quality and state of health of the pipeline infrastructure can be achieved, allowing an early detection of leaks and water contamination. Acoustic wave-based technology has arisen as a viable communication technique among the nodes of the network. Such technology can be suitable to replace traditional wireless networks in SWGs, as the acoustic channel is intrinsically embedded in the water supply network. However, the fluid-filled pipe is one of the most challenging media to be employed for data communication. This paper aims at reviewing those works dealing with acoustic-based communication networks in real large-scale urban water supply networks. An overview on the characteristics, trends and design challenges of existing works is provided as a guideline for future research.

Plums are widely distributed in Türkiye and around the world. Different wild grown plum spe-cies such as Prunus spinosa, Prunus cerasifera and Prunus domestica shows abundance of different climatic zones in Türkiye. Seed propagated diverse plum trees has been growing Anatolia for centuries and fruits of wild plants has economic value. In this study a total of 8 wild grown blackthorn (Prunus spinosa) sampled from Ispir district of Erzurum province and subjected to morphological, biochemical and antioxidant characterization. Taste, aroma, and juiciness were used as the criteria for sensory analysis, and a trained panel of five experts established and evaluated the sensory characteristics of the fruits of the blackthorn. Fruit weight, fruit skin and flesh color as L*, a* and b* values were the main morphological parameters. For biochemical analysis, organic acids, SSC (Soluble Solid Content), vitamin C, total anthocyanins, total phenol-ic content and total antioxidant capacity were determined. Antioxidant capacity was determined by FRAP (ferric reducing antioxidant power) assay. Results indicated significant differences among genotypes. Fruit weight were found between 2.78-3.67 g. Skin L∗, a∗ and b∗ values were 13.11-16.12, 2.56-3.85 and 2.01-3.44, respectively. Flesh L∗, a∗ and b∗ values were in range of 17.45-20.37, 4.88-6.73 and 4.12-5.66, respectively. SSC content was ranged from 18.66% to 21.07%. The total phenolic content (TPC), total anthocyanin content (TAC) and ferric reducing antioxi-dant power (FRAP) were between 372-504 mg GAE/100 g; 53-72 mg cy-3-g eq./100 g and 107-134 mmol Fe (II) eq./g, respectively. The dominant organic acid was malic acid for all genotypes and varied from 1.04 g/100 g to 1.52 g/100 g fresh weight base. Results indicated the importance wild blackthorn fruits for human health.

The wild grapevine, Vitis vinifera subsp. sylvestris grows naturally throughout the northern hemisphere, including the Mediterranean region. Wild grapevines were also observed sporadically across the southern Levant and have been considered a non-native feral plant. Nevertheless, no formal characterization was conducted for wild grapevines in this region; thus, its taxonomical assignment remains elusive. Previously we have shown that the wild grapevine populations growing in northern Israel are genetically separated from the feral domesticated forms. The aim of this work was to comprehensively describe the morphological, anatomical, and ecological traits of wild grapevines naturally thriving in two distinct habitats in Israel. The dioicous nature of the wild grapevine, as well as their flower and pollen morphology, their characteristic sylvestris fruit and seed morphology, in addition to the occurrence of natural germination of seeds in close vicinity to the mother plant, all lead to our conclusion that these plants belong to Vitis vinifera subsp. Sylvestris, and should be included in the Flora Palaestina. These findings, combined with the recently-published genetic evidence for these populations significantly advance our understanding of the species' ecology and persistence under climate change.

Rotavirus is a major cause of diarrhea globally in animals and young children under 5 years. Here, molecular detection and genetic characterization of porcine rotavirus in smallholder and commercial pig farms in the Lusaka Province of Zambia were con-ducted. Screening of 148 stool samples by RT-PCR targeting the VP6 gene revealed a prevalence of 22.9 % (34/148). Further testing of VP6-positive samples with VP7-specific primers produced 12 positives, which were then Sanger-sequenced. BLASTn of the VP7 positives showed sequence similarity to porcine and human rota-virus strains with identities ranging from 87.5% to 97.1%. By next-generation se-quencing, the full-length genetic constellation of the representative strains RVA/pig-wt/ZMB/LSK0137 and RVA/pig-wt/ZMB/LSK0147 were determined. Geno-typing of these strains revealed a known Wa-like genetic backbone and their genetic constellations were G4-P[6]-I5-R1-C1-M1-A8-N1-T1-E1-H1 and G9-P[13]-I5-R1-C1-M1-A8-N1-T1-E1-H1, respectively. Phylogenetic analysis revealed that these two viruses might have their ancestral origin from pigs, though some of their gene segments were related to human strains. The study shows evidence of reas-sortment and possible interspecies transmission between pigs and humans in Zambia. Therefore, the “One Health” surveillance approach for rotavirus A in animals and humans is recommended to inform the design of effective control measures.

The purpose of this paper is to develop a phytosociological, ecological, cytogenetic, eco-protective and economic study of the vegetation of the wetland ecosystems in the Vlădeasa Massif built by the phytocoenoses of the association Carici echinatae-Sphagnetum (Balázs 1942) Soó 1955. In order to attain the aim and objectives put forward we carried out 10 phytocoenological surveys (surveys) in the phytocoenoses of the ecosystems during the optimal vegetation periods related to the summer-serotinal season in the timeframe 2020-2021. The taxonomically inventoried species were included in an association table by the criteria of their belonging to the basic coenotaxa of the association, alliance, order, vegetation class. The outcomes of the phytocoenosis research of the vegetation of the wetland ecosystems were processed, analysed, interpreted based on tables, histograms, diagrams, regarding the numerical and percentage weight of the species in the ecological categories of bioforms, phytogeographic elements (geoelements) and cytogenetic elements. The ecological behaviour of the species confined in ecosystems was also analysed by their relationship with ecological factors, edaphic soil moisture, air temperature and chemical reaction of the soil. The current state of ecosystems, potential threats, sustainable conservation of biodiversity, dynamics of phytocenoses, economic and scientific relevance were also subjected to research. The results obtained in the surveyed territory were analysed and compared numerically and as percentage with the data provided by two reference scientific works belonging to authors who independently carried out research with a similar topic in two different geographical regions of the Western Carpathians.

Approximately 2 TCF (Trillion Cubic Feet) of acid gas are projected to be injected into the Surmeh formation. The recommended injection rate is 180 MMSCFD (Million standard cubic feet per day), based on acid gas content and gas in place of the source of injection. The tight nature of the Surmeh formation limits injectivity, with a maximum achievable rate of 7 MMSCFD for permeability of 1 mD (millidarcy). However, higher porosity (12%) and permeability of 100 mD enable more efficient injection without fracturing the formation. This study provides valuable insights into the feasibility of AGI in saline aquifers, emphasizing reservoir characterization, geomechanics, caprock integrity, and rock properties. The findings contribute to the implementation of environmentally sustainable acid gas disposal at offshore reservoirs.

Polyaniline or PANI is a conductive polymer (CPs) with flexibility in turning into conducting properties. The drawback is mainly in terms of limited mechanical properties improvement which attracted the interest in fabrication of PANI with other polymeric materials. PANI-PVL composites film was synthesized and fabricated in this work with chronological steps according to the objectives aligned in two different phases. The first phase determines the optimum parameters to synthesize nanosized PANI. The ideal initial molar ratio, r was 1, stirring speed of 600 rpm, purified by filtration, synthesis temperature of 25 oC, washed by dopant acid, acetone and distilled water. The usage of non-ionic surfactant, Triton X-100 (TX100) with 0.1 % concentration favours the formation of smaller particle size of PANI and good dispersibility compared to the usage of anionic sodium dodecyl sulphate (SDS). The synthesis of PANI in nanosized dimension has the potential to be applied for antimicrobial applications such as gloves and antimicrobial coating of frequent contact points in the near future.

Comminution is the most power-demanding stage, and the lack of geometallurgical testing, often for financial reasons, may result in an inefficient operation. The Geopyörä Rock Breakage test was developed with the objective of making mineral variability data more accessible by providing both standard comminution parameters and rock mechanical properties at low cost, and with a modest sample size, allowing a larger number of samples to be tested to reduce uncertainties and assure productivity. The objective of this work is to present the results of an extensive validation of this new rock breakage method against two of the main tests currently in use, namely the SMC® and Bond ball mill work index tests. More than 100 samples have been tested and the results compared, showing that the new method can accurately estimate the parameters of the traditional tests. This confirms that the new test is a reliable tool for comminution and geometallurgical tests.

Citrus peels are considered as a rich source of valuable biomolecules like pectin as polymer of polysaccharide acid. In this study, response surface methodology was used to optimize pectin extraction from Citrus clementina peels using citric acid as extraction solvent. The effect of parameters conditioning the extraction process and pectin yield (pH, temperature, extraction time, solid/liquid ratio, and raw material particle size) was investigated using a Box-Behnken design. The quality of the extracted pectin was assessed both chemically (moisture, ash, protein, and sugar content) and functionally (gelling power and emulsifying activity). According to the screening experiment, the factors pH, temperature, and particle size were the main factors influencing the pectin yield. The adjusted mathematical model enabled us to plot response surfaces in order to determine optimal extraction conditions. The highest production yield of pectin (26.6%) was obtained at the optimal conditions of: pH = 1.5; temperature 100 °C and particle size = 0.1 mm for an extraction time of 30min. Compared to the predicted value of 26.6%, the experimental extraction yield was about 21.4% of pectin. Concerning the functional properties, the extracted pectin has a high gelling power of 164°SAG and an emulsifying activity of 38.5%.

Fault detection is an important step for subsurface interpretation and reservoir characterization from 3D seismic images. Due to the numerous and complicated faulting structures of seismic images, manual seismic interpretation is time taking and need intensive work. To overcome this problem, geoscientists are coming up with productive computer-aided techniques for assisting in interpreter science for many years. However, in this paper, we used a pre-trained CNN model to predict faults from the 3D seismic volume of the Poseidon field of Browse Basin, Australia. Basically, this field is highly structured with complex normal faulting throughout the targeted Plover Formations. So, our motivation for this work in this field is to compare machine learning-based fault prediction to user interpreted faults identification with supported by seismic variance attribute. We found very satisfying result using DL with having an improved fault probability volume that outperform variance technology. Therefore, we propose that this workflow could reduce time and able to predict fault quite accurately in any field area.

One of the issues facing modern society, whatever the socio-economic level of the communities involved, is the development of sustainable strategies in the management of sludge/biosolids. Today, it is imperative to replace solutions aimed at simply “disposing of” with those oriented towards “maximizing recovery benefits”. It is desirable that agricultural use remains the main option in sludge/biosolids management, but to ensure effective and safe agronomic benefits, correctly fulfill the legal requirements, and build stakeholder and public confidence, rigorous and sustainable procedures need to be estab-lished. The development of realistic and enforceable regulation is crucial as it represents the right bal-ance between the different aspects of a coordinated and effective management. Furthermore, it is to recognize that regulation needs to be supported by standardized character-ization procedures and guidelines of good practices, because well-defined procedures allow le-gal requirements to be correctly and uniformly met, thus ensuring reliable comparison of re-sults obtained under different conditions. In this article, main aspects to consider for a sustainable application of this management practice are discussed, together with the parameters that need to be evaluated for the characterization of sludge/biosolids, according to the various aspects related to the agricultural use.

In this study, the gravimetric characterization and analysis of the solubilized extract of the organic fraction of Urban Household Solid Waste (RSDU) from the municipality of Belém do Pará was carried out in order to obtain the composition of the collected materials and the characteristics of the liquid resulting from the solubilization of these materials . The waste used to carry out this research was collected door-to-door, in which the points and neighborhoods served were determined through the sectorization of these locations and representative statistical sampling. For the sectorization of neighborhoods, family income values ​​were considered as the main parameter. After collecting the solid waste, the material was sent to the facilities of the Federal University of Pará (FUPa), where the waste was classified into paper, cardboard, tetrapak, rigid plastic, soft plastic, metals, glass, organic matter, waste toilets, fabrics and others. The organic fraction of solid waste was separated and sent to the drying, crushing and packaging processes. Subsequently, the solubilized extract of the organic fraction of solid waste was obtained, following the methodology recommended by NBR standard nº 10.006/2004, of the Brazilian Association of Technical Standards and the values ​​obtained were compared with Ordinance GM/MS nº 888/2021 and CONAMA Resolution nº 357/2005, in addition to results obtained by other authors. After carrying out the gravimetric characterization, it was possible to obtain the average proportions of 5.09% paper, 3.20% cardboard, 0.94% tetrapak, 3.58% rigid plastic, 9.97% soft plastic, 2.00% metals, 55.57% organic matter, 1.86% glass, 14.26% sanitary waste, 3.23% fabrics and 3.00% other waste. High values ​​of organic residues were found in the gravimetric composition, which can be explained by the collection method used and the high humidity of the organic solid residues. In the analyzes of the solubilized extract, values ​​of Hp (3.69 to 4.92), Turbidity (791 to 1,733 uT), Apparent Color (8,500 to 12,500 uC), True Color (6,000 to 14,000 uC), Total Dissolved Solids (5,330 to 8,040 mg/L), Total Nitrogen (201.80 to 359.90 mg/L), Ammoniacal Nitrogen (161 to 289 mg/L), Nitrate (10 to 40 mg/L), Total Phosphorus (52.30 to 166.80 mg/L) and Chemical Oxygen Demand (28,701 mg/L to 38,608 mg/L), in addition to other measured parameters, in which such information makes it possible to check the similarities of the waste solubilization conditions to that of leachates from landfills, in addition to not being in compliance with environmental and health legislation, demonstrating risks to the local environment and public health.

Against the backdrop of global climate change, the frequency of drought events is increasing, leading to significant impacts on human society and development. Therefore, it is crucial to study the propagation patterns and trends of drought characteristics over a long-time scale. The main objective of this study is to delineate the dynamics of drought characteristics by examining their propagation patterns in China from 1951 to 2020. In this study, precipitation data from meteorological stations across mainland China were used. A comprehensive dataset consisting of 700 stations over the past 70 years was collected and analyzed. To ensure data accuracy, the GPCC database was employed for data correction and gap filling. Long-term drought evolution was assessed using both the SPI-12 and SPEI-12 indices to detect drought characteristics. Two Moran indices were applied to identify propagation patterns, and the MK analysis method along with the Theil-Sen slope estimator were utilized to track historical trends of these indices. The findings of this study reveal the following key results: (i) Based on the SPI-12, the main areas of China that are prone to drought are mostly concentrated around the Hu Huanyong Line. Indicating a tendency towards drying based on the decadal change analysis. (ii) The distribution of drought-prone areas in China, as indicated by the SPEI-12, is extensive and broadly distributed, with a correlation to urbanization and population density. These drought-prone areas are gradually expanding. (iii) Between 2010 and 2011, China experienced the most severe drought event in nearly 70 years, affecting nearly 50% of the country's area with a high degree of severity. This event may be attributed to atmospheric circulation variability, exacerbated by the impact of urbanization on precipitation and drought. (iv) The frequency of drought occurrence in China gradually decreases from south to north, with the northeast and northern regions being less affected. However, areas with less frequent droughts experience longer and more severe drought durations. In conclusion, this study provides valuable insights into the characteristics and propagation patterns of drought in China, offering essential information for the development of effective strategies to mitigate the impacts of drought events.

In this paper, the characterization of 3D printed materials that are considered in the design of multirotor unmanned aerial vehicles (UAVs) for specialised purposes was carried out. The multirotor UAV system is briefly described, primarily from the aspect of system dynamics, considering that the airframe parts connect the UAV components, including the propulsion configuration, into a functional assembly. Three additive manufacturing (AM) technologies were discussed, and a brief overview was given of selective laser sintering (SLS), fused deposition modeling (FDM), and continuous fiber fabrication (CFF). Using hardware and related software, 12 series of specimens were produced which were experimentally tested utilizing a quasi-static uniaxial tensile test. The results of the experimental tests are given graphically with displacement-force characteristics. In this work, the focus is on CFF technology and the testing of materials that will be used in the production of mechanically loaded airframe parts of multirotor UAVs. Furthermore, an overview was given in such a way that the specimens were grouped, and the mean values of the maximum stress were presented, so that the tested materials could be more easily compared with conventional materials, such as aluminum alloys.

Patients receiving hemodialysis are at risk of vascular access infections (VAIs) and particularly vulnerable to the opportunistic pathogen Staphylococcus aureus. Hemodialysis patients were also at increased risk of infection during the COVID-19 pandemic. Therefore, this study determined the change in the molecular and antibiotic resistance profiles of S. aureus isolates from VAIs during the pandemic compared with before. 102 S. aureus isolates were collected from VAIs between November 2013 and December 2021. Before the pandemic, 69 isolates were collected, 58%, 39.1%, and 2.9% from arteriovenous grafts (AVGs), tunneled cuffed catheters (TCCs), and arteriovenous fistulas (AVFs), respectively. The prevalence of AVG and TCC isolates changed to 39.4% and 60.6%, respectively, of 33 isolates during the pandemic. Sequence type (ST)59 was the predominant clone in TCC-methicillin-resistant S. aureus (MRSA) and AVG-MRSA before the pandemic, whereas the predominant clone was ST8 in AVG-MRSA during the pandemic. ST59 carrying the ermB gene was resistant to clindamycin and erythromycin. By contrast, ST8 carrying the msrA gene was exclusively resistant to erythromycin. The ST distribution for different VAIs changed from before to during the pandemic. The change in antibiotic resistance rate for different VAIs was closely related to the distribution of specific STs.

Blast charge initiation procedures have a significant impact on both mining safety and production rates. In this study, the inventory benefit of an electric initiation system was investigated to assess its influence on both fragmentation and blast-induced damages. The Wipfrag software's was used to examine the size distribution and productivity of 12 small-scale blasts initiated by both non-electric and electric detonators. All blast rounds was initiated with plain type of electric and NONEL detonators. The average burden, spacing, stemming length, and charge weight were, respectively, 0.85 m, 1.10 m, 0.66m, and 1.1kg. The results showed that the mesh through which 80% of the blast fragments will pass for the electric blast is smaller than the mesh through which the material products from the NONEL blast will pass. The results also demonstrate that the generated blast-induced ground vibration (PPV) from all blast rounds for electric blast varies from 0.4–1.2 mm/s and 80–105dB, while that for non-electric blast ranges from 0.05–0.2mm/s and 72–95dB. As a result, the electric blast initiation technique was found to produce good fragmentation, with a higher percentage of optimum fragment sizes on spec than non-electrically initiated blasts.

Polymeric composites such as Poly-ether-ether-ketone (PEEK)/carbon fiber (CF) have been widely utilized due to outstanding performances such as high specific strength and specific modulus. The PEEK/CF components via powder-bed fusion additive manufacturing usually show brittle fracture behaviors induced by their poor interfacial affinity and inner voids. These defects are strongly associated with powder packing quality upon deposition. The particle dynamic model has been widely employed to study the interactions of particle motions. Powder property, bulk material property, and interfacial features of composite powders are key factors in the particle dynamic model. In this work, an efficient and systematic material evaluation is developed for composite powders to investigate their deposition mechanism. The discrete element method is utilized to simulate the dynamic behaviors of PEEK/CF composite powders. The powder properties, bulk material properties, and interfacial features of powders are calibrated and justified by experimental measurement, numerical simulation, and design of experiments. The particle dynamic model can well explain the powder flow behaviors and interactions. It reveals that the addition of short CF particles can assist the flow of PEEK powders and improve the packing quality of the composite powders.

The chemical reaction between the quinolone antibiotic oxolinic acid (OA) and Fe(III), Zn(II), Ca(II), and Mg(II) ions results in the formation of metal-based complexes with the following formulas: [Fe(OA)(H2O)2Cl2]2H2O, [Zn(OA)(H2O)Cl]2H2O, [Ca(OA)(H2O)Cl], and [Mg(OA)(H2O)Cl]. We used analytical (C, N, H, Cl, metal analysis) and spectral (FT-IR, 1H NMR, UV-visible) data to structurally characterize the synthesized metal-based complexes of the OA molecule. We found that the OA molecule utilizes the two oxygen atoms of the carboxylate group and the pyridone C=O group to bind the investigated metal ions. The morphological properties of the synthesized OA complexes were assessed using X-ray powder diffractometry (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The biological properties, specifically antibacterial and antifungal activity, of the synthesized complexes were evaluated in vitro using the Kirby-Bauer disc diffusion protocol with five bacterial and three fungal strains. The complex containing Ca(II) ions exhibited remarkable antibacterial and antifungal activity against all tested microbial strains, surpassing or equaling the potency of the standard drugs (streptomycin for antibacterial assays and ketoconazole for antifungal assays).

The gate resistance is a parasitic element in transistors for RF and millimeter-wave circuits that can negatively impact power gain and noise figure. To develop accurate device models, a reliable measurement methodology is crucial. This article reviews the standard measurement methodology used in the literature and proposes also an additional method, which is evaluated using suitable test structures in a 16nm FinFET process. The advantages and disadvantages of the two approaches are discussed along with their respective application scenarios

Proso millet starch (PMS) as an unconventional and underutilized cereal starch is becoming increasingly popular worldwide due to its health-promoting properties. This review summarizes research progress in the isolation, characterization, modification, and applications of PMS. PMS can be isolated from proso millet grains by acidic, alkaline, or enzymatic extraction. PMS exhibits typical A-type polymorphic diffraction patterns and shows polygonal and spherical granular structures with a granule size of 0.3-17 µm. PMS is modified by chemical, physical, and biological methods. The native and modified PMS are analyzed for swelling power, solubility, pasting properties, thermal properties, retrogradation, freeze-thaw stability, and in vitro digestibility. The improved physicochemical, structural, and functional properties and digestibility of modified PMS are discussed in terms of their suitability for specific applications. The potential applications of native and modified PMS in food and non-food products are presented. Future prospects for research and commercial use of PMS in the food industry are also highlighted.

The gold nanoparticle (AuNP) was synthesized using the well-known Turkevich method. This article explains didactic step-by-step of the synthesis, showing pictures of the entire process, including a well-explained mechanism and characterization study. The synthesis includes the reduction of NaAuCl4 using sodium citrate in high temperature (around 90 ⁰C). The two main mechanisms used to explain the AuNP synthesis via Turkevich method were explained. The first mechanism considerate that a nanowire intermediary and the other proposed that aggregate intermediates are not formed at any time during the synthesis. The materials (NaAuCl4 and AuNP) were characterized by UV-Vis, SEM, AFM, XRD and DLS. The UV-Vis exhibit an absorption maximum in 521 nm because the surface plasmon resonance (SPR) absorption band of AuNP. The SEM images of NaAuCl4 presents crystals with cubic shapes, while the AuNP presents average particle size of about 16-25 nm and particles that appear mainly spherical. To confirm the particles shapes, the AFM was conducted and it was possible to observe clearly the individual spherical nanoparticles. The XRD of AuNP showed the four main characteristic peaks for silver corresponding to (111), (200), (220) and (311) planes, confirming the cubic (FCC) silver. The DLS presented the average particle size of 3.3 ± 0.9 nm and the polydispersity index (PDI) of 0.574. In summary, the AuNP was synthesized using a simple and fast method. The result was a spherical and ultrasmall particle, that can be used is several applications.

The study of phytotherapy in dentistry is relevant due to the low occurrence of research in the treatment of oral pathologies, such as caries and periodontal disease. Thus, the aim of this research was to characterize the chemical composition of extracts from the leaves of Couroupita guianensis Aubl, including toxicological evaluation and the antioxidant and antimicrobial potential against Staphylococcus aureus, Streptococcus mutans and Candida albicans. Three extracts were prepared using assisted ultrasound, originating the Crude Ultrasound Extract (CUE) and Soxhlet apparatus, originating the Crude Soxhlet Extract (CSE) and the Ethanol Soxhlet Extract (ESE). In the analysis of the chemical composition, the presence of flavonoids, tannins and saponins were detected. LC-DAD analysis revealed the presence of caffeic acid, sinapic acid, rutin, quercetin, luteolin, kaempferol and apigenin in all extracts. In the GC-MS analysis, stigmasterol and β-sitosterol were identified in CUE and CSE. The antioxidant potentials, determined by the DPPH• and ABTS•+ methods, the ESE showed higher antioxidant activity (2.98 ± 0.96 and 4.93 ± 0.90, respectively). In the evaluation of toxicity, the CUE 50µg/mL and the ESE 50 µg/mL presented growth stimulation of Allium cepa roots. At a concentration of 750µg/mL, all extracts inhibited root growth. None of the extracts showed toxicity against Artemia salina. Antibacterial action was detected in all extracts, mainly against the microorganisms S. aureus and S. mutans; however, the antifungal action against C. albicans was not detected. From the results, the extracts of C. guianensis have therapeutic potential for use in the control of microorganisms in the oral microbiota.

In this study various samples were fabricated by increasing the amount of CNT from 0% to 5%. The bulk mechanical properties of the samples were measured using DMA. Alternatively, the local mechanical properties were assessed using nanoindentation technique. There is a clear trend that the behavior of the material is dependent of carbon fillers before, during and after percolation threshold. The bulk mechanical properties were reduced after the percolation threshold due to CNT agglomeration. Then the samples were exposed to acid solution for one week and one month. Regardless the amount of CNT in the matrix, there is always a gradient of properties from the skin to the core of the sample. There is a net reduction of in physical properties. However, the level of degradation was a dependent of the amount of CNT in the host polymer. At higher concentration the CNTs behave as a barrier. However due to the formation of porosity around the CNT agglomerates, the acid diffusion encounters preferential path ways. . Both techniques lead to the same observation..

Materials known as Nd:YAG are crystalline materials of the cubic system made from neodymium-doped yttrium aluminum garnet, which among others, have excellent optical properties. Nd:YAG four-level laser devices are highly used in both the health and industrial sectors. In this study, a simple and inexpensive alternative to manufacturing Nd:YAG materials through solid state reactions following powder processing routes was proposed. For this, an intense mixture of the precursor materials (Al2O3 and Y2O3) was carried out, followed by the addition of neodymium atoms to improve the optical properties of the resulting material. High energy mechanical mixing of the precursor powders resulted in submicron particles, with good size distributions of the powders. The advance of YAG formation was monitored by intermediate phase formation during heat treatment through interrupted tests at different temperatures and analysis by X-ray diffraction. From this analysis, it was found that reaction for the formation of the desired YAG is completed at 1500°C. Fourier-transform infrared spectroscopy analyses determined the presence of functional groups corresponding to the YAG. Finally, the study by optical emission spectroscopy showed wavelengths in agreement with the electronic structure of the elements of the synthesized Nd:YAG.

Nepal is one of the most seismically active regions in the world, as highlighted by the recent devastating 2015, Mw7.8 Gorkha earthquake and a robust assessment of seismic hazard is paramount for the design of earthquake-resistant structures. In this study we present a new probabilistic seismic hazard assessment (PSHA) model for Nepal. We considered data and findings from recent scientific publications, which allowed us to develop a unified homogenized seismicity catalogue, propose alternative Seismic Source Characterization (SSC) models including up-to-date parameters of major thrust faults like Main Frontal Thrust – MFT and Main Boundary Thrust – MBT, while also considering existing SSC models and various hazard modelling strategies within a logic tree framework. The sensitivity analyses show the hazard levels are generally higher for SSC models integrating the major thrust faults, followed by homogenous volume sources and smoothed seismicity approach. The hazard maps covering entire Nepal is presented as well as the Uniform Hazard Spectra (UHS) for 5 selected locations (Kathmandu, Pokhara, Biratnagar, Nepalganj and Dipayal) at return periods of 475- and 2,475-years considering Vs,30=760 m/s. The results obtained are generally consistent with most recent studies. However, a notable variability in hazard levels and several discrepancies with respect to the Nepal Building Code NBC105: 2020 [1] and Global Hazard Model, GEM [2] are noted and possible causes are discussed.

The prospective applications of chitosan-based hydrogels (CBHs), a category of biocompatible and biodegradable materials, in biomedical disciplines such as tissue engineering, wound healing, drug delivery, and biosensing have garnered great interest. The synthesis and characterization processes used to create CBHs play a significant role in determining their characteristics and effectiveness. The processing procedure could be tailored to obtain specific features like porosity, swelling, mechanical strength, degradation rate, and bioactivity, affecting the properties of CBHs to a great extent. Additionally, characterization methods aid in gaining access to the microstructures and properties of CBHs. Especially, this review provides a comprehensive assessment of the state-of-the-art with a focus on the affiliation between particular properties and application domains. The main obstacles and prospects for the future of CBH development for biomedical applications are also covered in the review.

The present study aimed at utilizing technically hydrolyzed lignin (THL), industrial biomass residue, derived in high-temperature diluted sulphuric acid hydrolysis of softwood and hardwood chips to sugars. The THL was carbonized in horizontal tube furnace at atmospheric pressure, in inert atmosphere and at three different temperatures (500, 600 and 700 ºC). Biochar chemical composition was investigated along with its HHV, thermal stability (thermogravimetric analysis) and textural properties. Surface area and pore volume were measured with nitrogen physisorption analysis often named upon Brunauer–Emmett–Teller (BET). Increasing the carbonization temperature reduced volatile organic compounds (40 ÷ 96 wt. %), increased fixed carbon (2.11 to 3.68 times the wt. % of fixed carbon in THL), ash and C-content. Moreover, H and O were reduced, while N- and S-content were below the detection limit. This suggested biochar application as solid biofuel. The biochar Fourier-transform infrared (FTIR) spectra revealed that the functional groups were gradually lost thus, forming materials having merely polycyclic aromatic structures and high condensation rate. The biochar obtained at 600 and 700 ºC proved having properties typical for microporous adsorbents, suitable for selective adsorption purposes. Based on the latest observations another biochar application was proposed - as catalyst.

Truffles are ascomycete hypogeous fungi belonging to the Tuberaceae family of the Pezizales order that grow in ectomycorrhizal symbiosis with tree roots and are known for their peculiar aromas and flavors. Axenic culture of truffle mycelium is problematic because it is not possible in many cases, and the growth rate is meager when it is possible. This limitation prompts searching and characterizing new strains that can be handled in laboratory conditions for basic and applied studies. In this work, a new strain of Tuber borchii (strain SP1) has been isolated and cultured, and its transcriptome has been analyzed under different in vitro culture conditions. The results show that the best T. borchii SP1 growth was obtained using maltose-enriched cultures made with soft-agar and in static submerged cultures made at 22ºC. The transcriptome analysis of this strain cultured in different media indicated that most of the gene transcription effort is due to a limited number of genes (20% of genes account for 80% of the transcription), that the transcription profile of the central metabolism genes was similar in the different conditions analyzed with a transcription signal detected for around 80% of the annotated genes. The gene expression profile suggests that T. borchii uses a fermentative rather than respiratory metabolism, even in aerobic conditions. Finally, there is a reduced expression of genes belonging to secondary metabolite clusters, whereas there is a significative transcription of those involved in producing volatile aromatic compounds.

Metal-organic frameworks (MOFs), composed of metal nodes and inorganic linkers are promising for a wide range of applications due to their unique periodic frameworks that can be flexibly tuned. Understanding of the structure-activity relationships can facilitate the development and application of MOFs nanomaterials. Transmission electron microscopy (TEM) is a one-of-a-kind technique capable of characterizing MOFs microstructures at the atomic scale. Besides, in-situ TEM set-ups make it possible to direct visualize the microstructural evolution of MOFs in real time, which enables monitoring transitions of MOFs during growth as well as under working conditions. However, MOFs are so sensitive to the high-energy electron beam which makes TEM-based characterizing methods challenging. In this review, we first introduce the main damage mechanisms for MOFs under electron beam irradiation and two strategies to minimize the damages: low-dose TEM and cryo-TEM. Then, we discuss the techniques combined with the two strategies to analyze the MOFs’ microstructure, including three-dimensional electron diffraction, direct detection electron counting camera, and iDPC-STEM. Groundbreaking milestones and research advances with respect to static characterization of MOFs structures are highlighted. In-situ TEM studies are exemplary reviewed to provide insights into MOFs dynamics induced by various stimuli. Additionally, perspectives on promising techniques that may further facilitate the MOFs study using TEM are analyzed.

3D printing is commonly used to create complex objects at a low cost. It has also been applied in the fabrication of metamaterials and metasurfaces, which alter the propagation path of electromagnetic waves. These structures have diverse applications, including enhancing beam direction, improving antenna gain and signal-to-noise ratio, and creating filters and reflectors. Metasurfaces are cheap to fabricate and their use is expected to boost antenna efficiency in 5G telecommunications and beyond. However, accurately characterizing their profile remains a significant challenge. This paper presents a low-cost fully automated 4-axis instrument for microwave metasurface charac-terization, overcoming limitations of manual methods and offering an efficient and accurate approach. This research represents a significant advancement in microwave metasurface characterization, enabling sophisticated techniques to advance wireless communication technolo-gies, as it is the case of the future 5G and millimeter-wave communication systems. The equipment has an approximate cost of $1550 USD and was able to characterize a metalens with a focal distance of 20 cm designed for signals at 30 GHz. It was possible to create 2D and 3D profiles of the intensity distribution focused by the metalens and extract parameters such as the gain (8.05 dB), 3dB depth of focus (11 cm) and full width at half maximum (2.17 cm). The comparison of the measurements with the diffraction calculations of the metalens showed a very good agreement between the in-tensity distributions and the parameters of the metalens.

China is a large agricultural country that produces a large amount of crop straw every year. Thus, the development of cost-effective and economic application of invasive plants is warranted. Biochars derived from crop straw has been proven to be promising for adsorbent materials. However, less studies have focused on biochar derived from different types of crop straw as adsorbent under the same conditions to compare their adsorption performance. Here, we characterized the five biochars in the same system (600 ℃). In results, GBC has higher ash content, pH, CEC, specific surface area, mineral composition and oxygen-containing functional groups. The adsorption kinetics can be explained adequately by pseudo-second-order model and Langmuir model, indicating that the adsorption behavior of the biochar is both physical adsorption and chemical adsorption, the adsorption process includes complexation reaction, cationic π bond, ion precipitation and electrostatic adsorption. In conclusion, GBC exhibited higher metal equilibrium adsorption capacities (125 mg·g-1 for Pb2+, 29 mg·g-1 for Cd2+). The solution pH, biochar dosing, pyrolysis temperature and the properties of these heavy metals were responsible for adsorption capacity, thus showing stronger affinity and better adsorption effect. Our results are important for the selection and utilization of plant-based biochar for different heavy metals.

This work aimed to study the thermal and crystalline properties of poly (1,4-phenylene sulfide)@carbon char nanocomposites. Coagulation-processed nanocomposites of polyphenylene sulfide were prepared using synthesized mesoporous nanocarbon of coconut shell as reinforcement. The mesoporous reinforcement was synthesized using a facile carbonization method. The investigation of the properties of nanocarbon was done by SAP, XRD, and FESEM analysis. The research was further propagated via the synthesis of nanocomposite by the addition of characterized nanofiller into poly (1,4-phenylene sulfide) at five different combinations. The coagulation method was utilized for the nanocomposite formation. The obtained nanocomposite was analyzed using FTIR, TGA, DSC, and FESEM analysis. The BET surface area and average pore volume of bio-carbon prepared from coconut shell residue were calculated to be 1517 m2/g and 2.51 nm respectively. The addition of nanocarbon to poly (1,4-phenylene sulfide) has led to an increase in thermal stability and crystallinity up to 6% loading of filler. The minimum achievable glass transition temperature is for 6 % doping of filler into the polymer matrix. It was established that the thermal, morphological, and crystalline properties have been tailored by synthesizing their nanocomposites with mesoporous bio-nanocarbon obtained from coconut shells. So, the loading of filler into poly (1,4-phenylene sulfide) can be optimized to enhance its thermoplastic properties for surface applications.

Healthcare professionals and resource planners can use healthcare delivery process mining to ensure the optimal utilisation of scarce healthcare resources when developing policies. Within hospitals, patients' Length of Stay (LOS) and volume of admitted patients, in terms of number and characteristics (age, gender, and social deter-minants), are significant factors determining daily resource requirements. In this study, we used Coxian phase-type Distribution (C-PHD) based Phase-Type Survival (PTS) trees for analysing how covariates such as admission date, gender, age, district, and admissions source influence the admission rate and LOS distribution. PTS trees. This study used a two-year data set (2011-2012) of patients admitted to the Emergency Department at Mater Dei Hospital to generate models and an independent one-year data set (2013) of patients admitted to the Emergency Department at Mater Dei Hospital to evaluate. The PTS tree effectively clusters patients based on their LOS, considering the prognostic significance of different covariates related to patients' characteristics. Charac-terising these covariates provided meaningful results about LOS. Similarly, the PTS tree was used to effectively cluster patients based on the admission rate, considering the prognostic significance of these covariates.

Laser therapy devices (LTDs) operating with near-infrared laser light are increasingly being used in sports medicine. For several reasons the users cannot evaluate whether or not such devices emit laser beams according to the specifications provided by the manufacturer and the settings of the device. In this study the laser beams from two different LTDs that can be used in sports medicine were thoroughly characterized by measuring the emitted power, pulse shapes and lengths, and spatial intensity distributions using professional, high-fidelity laser measurement technology. This was repeated for three units of each LDT independently to distinguish problems of individual units from potential intrinsic instrument design errors. The laser beams from the units of one LTD agreed with the settings at the device, with the measured average power for these units being within 3.3% of the set power. In contrast, the laser beams from the units of the other LTD showed large deviations between the settings and the actual emitted light. This device came with three laser diodes that could be used independently and simultaneously. The average power differed greatly between the units as well as between the laser diodes within each unit. Some laser diodes emitted essentially no light, which could lead to a lack of treatment of patients. Other laser diodes emitted much more power than set at the device (up to 230%) that could result in skin irritations or burnings of patients. These findings indicate a need for better standardization and consistency of therapeutic laser light sources.

We investigate the extent to which a two-level quantum system subjected to an external time-dependent drive can be characterized by supervised learning. We apply this approach to the case of bang-bang control and the estimation of the offset and the final distance to a given target state. The estimate is global in the sense that no a priori knowledge is required on the parameters to be determined. Different neural network algorithms are tested on a series of data sets. We point out the limits of the estimation procedure with respect to the properties of the mapping to be interpolated. We discuss the physical relevance of the different results.

A novel technique using a W-band metasurface for the purpose of transmissive fine powder layer sensing is presented. The proposed technique may allow for the detection, identification, and characterization of inhomogeneous ultrafine powder layers which are effectively hundreds of times thinner than the incident wavelengths used to sense them. Such a technique may be useful during personnel screening processes (i.e., at an airport) and in industrial manufacturing environments where early detection and quantization of harmful airborne particulates can be a matter of security or safety. To our knowledge, the requisite science involved in such a novel W-band metasurface sensing technique has not been fully explored.

In this work, the effect of reaction time and biomass-to-H2O ratio on the structural evolution of hydro-char and kinetic of by hydrothermal processing of corn Stover with hot compressed H2O, have been systematically investigated. The experiments were carried out at 250 °C, heating rate of 2.0 °C/min, biomass-to-H2O ratio of 1:10, and reaction times of 60, 120, and 240 minutes, and at 250 °C, 240 minutes, heating rate of 2.0 °C/min, and biomass-to-H2O water ratio of 1:10, 1:15, and 1:20, using a pilot scale stirred tank reactor of 5 gallon. The characterization of solid phase products performed by thermo-gravimetric analysis, scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction, and elemental analysis (C, N, H, S). The physical-chemistry properties of solid phase analyzed in terms of dry matter (DM), total organic content (TOC), and ash. The yields of solid and gas phases decrease linearly with decreasing biomass-to-H2O ratio, while that of liquid phases increases linearly. For constant biomass-to-H2O ratio, the yields of solid, liquid, and gaseous reaction products varied between 52.97 and 35.82% (wt.), 44.84 and 54.59% (wt.), and 2.19 and 9.58% (wt.), respectively. The yield of solids decreases exponentially by decreasing the reaction time, while the yields of liquid and gas phases increase exponentially. For constant biomass-to-H2O ratio, TG/DTG curves shows that reaction time of 60 minutes was not enough to carbonize corn Stover. For constant reaction time, TG/DTG curves shows that increasing the H2O-to-biomass ratio worse the carbonization of corn Stover. For constant biomass-to-H2O ratio, the SEM images show the main morphological structure of the corn Stover remains practically unchanged, while for constant reaction time, SEM images show that plant microstructure retains part of its original morphology, demonstrating that a decrease on biomass-to-H2O ratio worse the carbonization of corn Stover. For constant biomass-to-H2O ratio, the EDX analysis shows that the carbon content in hydro-char increases with reaction time, while for constant reaction time, the carbon content decreases with increasing biomass-to-H2O ratio. The kinetic of corn Stover degradation was correlated with a pseudo-first order exponential model, exhibiting a root-mean-square error (r2) of 1.000, demonstrating that degradation kinetics of corn Stover with hot compressed H2O, expressed as hydro-char formation, is well described by an exponential decay kinetics.

Drinking water quality is a major concern, especially in African countries. This manuscript aims to analyze the chemical composition of Lioua’s groundwater in order to determine the geological processes influencing the chemical elements' composition and origin. Therefore, chemometrics techniques such as multivariate statistical analysis (MSA) and time series methods (TSM) are used. Indeed, MSA includes a component analysis (PCA) and a cluster analysis (CA), while au-tocorrelation analysis (AA) supplemented by simple spectral density analysis (SDA) is used for TMS. PCA displays three main factors explaining a total variance (TV) of 85.01 %. Factors 1, 2, and 3 are 68.72%, 11.96%, and 8.89 % of TV, respectively. In the CA, three groups were controlled by TDS and EC. G1 reveals a close association between SO42−, K+, Ca2+, and TDS; G2 reveals a close association between Na+, Cl−, Mg2+, and EC; G3 shows the dissociation of bicarbonates HCO3− and NO3− from other chemical elements. AA shows a linear interrelationship of EC, Mg2+, Na+, K+, Cl−, and SO42−. However, NO3− and HCO3− indicate uncorrelated characteristics with other parameters. For SDA, the correlograms of Mg2+, Na+, K+, Cl−, and SO42− have a similar trend with EC. None-theless, pH, Ca2+, HCO3− and NO3− exhibit multiple peaks related to the presence of several dis-tinct cyclic mechanisms. The methods enabled the authors to conclude that the geochemical processes influencing the chemical composition are: (i) dissolution of evaporated mineral depos-its, (ii) water-rock interaction, and (iii) evaporation process. In addition, Groundwater exhibits two bipolar characteristics, one recorded with negative and positive charges on pH and Ca+ and another recorded only with negative charges on HCO3− and NO3−. On the other hand, SO42-, K+, Ca2+, and TDS are the major predominant elements in the groundwater’s chemical composition. The major participation of salts and chlorides is in the electrical conductivity of water. The dominance of the lithological factor in the overall mineralization of the Plio-Quaternary surface aquifer waters. The origins of HCO3− and NO3− are different. Indeed, carbonated for HCO3- has a carbonate origin, whereas NO3– has an anthropogenic origin. The salinity was affected by Mg2+, SO42-, Cl-, Na+, K+, and EC. Ca2+, HCO3− and NO3− are resulted from human activity fertilizers, the carbonate facies outcrops, and domestic sewage.

Epizootic haemorrhagic disease (EHD) is a Culicoides-borne viral disease caused by epizootic haemorrhagic disease virus (EHDV) and associated with clinical manifestations in cervids and bovids. In late September 2021, EHDV was reported in cattle farms in central/western Tunisia. It rapidly spread throughout the country with more than 200 confirmed outbreaks. A combination of classical and molecular techniques was applied to characterize the causative virus as a member of EHDV-8 serotype. This is the first evidence of EHDV- 8 circulation since 1982 when the prototype EHDV-8 strain was isolated in Australia. This work highlights the urgent need for vaccines for a range of EHDV serotypes.

There is increasing interest in the application of near-infrared (NIR) laser light for the treatment of various musculoskeletal disorders. The present study thoroughly examined the physical characteristics of laser beams from two different laser therapy devices that are commercially available for the treatment of musculoskeletal disorders. Then, these laser beams were used to measure the penetration depth in various biological tissues from different animal species. The key result of the present study was the finding that for all investigated tissues, most of the initial light energy was lost in the first one to two millimeters, more than 90% of the light energy was absorbed within the first ten millimeters, and there was hardly any light energy left after 15 – 20 mm of tissue. Furthermore, the investigated laser therapy devices fundamentally differed in several laser beam parameters that can have an influence on how light is transmitted through tissue. Overall, the present study showed that a laser therapy device that is supposed to reach deep layers of tissue for treatments of musculoskeletal disorders should operate with a wavelength between 800 nm and 905 nm, a top-hat beam profile, and it should emit very short pulses with a large peak power.

Telomere repeats at the ends of human chromosomes protect chromosomes from degradation, and telomerase has a prominent role in telomere maintenance. Telomerase also affects cell proliferation, DNA replication, differentiation, and tumourigenesis. TERT (telomerase reverse transcriptase enzyme) is the catalytic subunit of telomerase and is critical for enzyme activity. TERT promoter mutations and promoter methylation are strongly associated with increased telomerase activation in cancer cells. Notably, TERT and telomerase are downregulated in stem cells during their differentiation. Therefore, the link between differentiation and telomerase provides a valuable tool for studying the epigenetic regulation of TERT enzyme. Oxygen tension affects several cellular behaviours including proliferation, metabolic activity, stemness, and differentiation. The role of oxygen tension in driving promoter modifications of the TERT gene in embryonic stem cells (ESCs) is poorly understood either in vitro or in vivo. We adopted a monolayer ESCs differentiation model to explore the role of low, physiological, oxygen (physoxia) in the epigenetic regulation of telomerase and associated genes, including TERT, DNMTs, and HDACs. Cells were cultured in either air, a 2% O2 incubator, or a 2% O2 oxygen workstation to provide a fully defined 2% O2 environment. Pre-gassed media (pre-conditioned to 2% O2 in a HypoxyCool unit) was used in all 2% O2 experimentation. As anticipated, physoxia culture increased the proliferation rate and stemness of ESCs and a slower onset of differentiation in physoxia was evident. Further, downregulated TERT expression was correlated to reduced telomerase activity during differentiation. TERT expression and telomerase activity remained significantly elevated in physoxia during differentiation. A substantial increase in TERT promoter methylation levels was noted during differentiation. Chemical inhibition of DNMT3B reduced TERT promoter methylation and was associated with increased TERT gene and telomerase activity during differentiation. DNMT3B CHiP demonstrated that downregulated TERT expression and increased proximal promoter methylation were associated with DNMT3B binding to the promoter. In conclusion, we have demonstrated that DNMT3B can directly bind TERT promoter, change its methylation levels, and contribute to regulation of telomerase activity.

Wounds represents a medical problem that contribute importantly to patient morbidity and to the healthcare costs in several pathologies. In Hidalgo, Mexico, Bacopa procumbens plant has been traditionally used for wound healing care for several generations; in vitro and in vivo experiments were design to evaluate the effects of bioactive compounds obtained from B. procumbens aquoethanolic extract and to determine the key pathways involved in wound regeneration. Bioactive compounds were characterized by HPLC- QTOF-MS and proliferation, migration, adhesion, and differentiation studies were done on NIH/3T3 fibroblasts. Polyphenolic compounds from Bacopa procumbens (PB) regulated proliferation and cell adhesion; enhanced migration reducing the artificial scratch area; and modulated cell differentiation. PB compounds were included in a hydrogel for topical administration on rat excision wound model. Histological, histochemical and mechanical analysis showed that PB treatment accelerates wound closure in at least 48 h; reduce inflammation, increasing cell proliferation and deposition and organization of collagen in earlier times. These changes resulted in the formation of a scar with better tensile properties. Immunohistochemistry and RT-PCR molecular analyses demonstrated that treatment induces: i) overexpression of transforming growth factor beta (TGF-β); and ii) the phosphorylation of Smad 2/3 and ERK1/2, suggesting the central role of some PB to enhance wound healing, modulating TGF-β activation.