Biomaterials are the basis for the development of medicine because they allow safe contact with a living organism. The aim of this work was to produce innovative oxide layers with a porous microstructure on the surface of commercially pure titanium Grade 4 (CpTi G4), and to characterize their properties as drug carriers. Anodization of the CpTi G4 subjected to mechanical grinding and electrochemical polishing was carried out in a solution of 1M ethylene glycol with the addition of 40 g of ammonium fluoride at a voltage of 20 V for 2, 18, 24 and 48 hours at room temperature. It was found that the longer anodization time, the greater the number of pores formed on the CpTi G4 surface as revealed by FE-SEM method, and the greater the surface roughness determined in profilometric tests. As the anodizing time increases, the amount of the drug in the form of gentamicin sulfate incorporated into the resulting pores decreases. The most favorable drug release kinetics profile determined by UV-VIS absorption spectroscopy was found for the CpTi G4 anodized for 2 h making them the best choice when it comes to the drug carrier allowing full use of the therapeutic dose of the drug.

The Chikungunya virus (CHIKV) presents global health challenges, with Brazil witnessing out-breaks since its introduction in 2014. In 2023, Minas Gerais (MG) experienced a CHIKV outbreak, prompting entomological investigations to identify vectors, viral lineages, and assess insecticide resistance. This study utilized social media platforms and citizen science concept to conduct a comprehensive entomological survey. Following Instagram posts, residents with CHIKV sus-pected cases were able to schedule mosquito aspirations. During the aspirations, 421 mosquitoes (165 Aedes aegypti and 256 Culex quinquefasciatus) were captured from 40 households in Salinas city (MG) and tested for Dengue, Zika and Chikungunya viruses through RT-qPCR. Twelve out 57 pools (10 of Ae. aegypti and 2 of Cx. quinquefasciatus) tested positive for CHIKV RNA. Viral RNA was also detected in the heads of 9 Ae. aegypti individuals (but not in Cx. quinquefasciatus). Genome sequencing revealed that CHIKV belonged to the East-Central-South-Africa (ECSA) genotype. Additionally, genetic analyses revealed high frequencies of kdr alleles, suggesting resistant to pyrethroids insecticides in this Ae. aegypti population. These findings emphasize the urgent need for innovative vector study and control strategies to combat arbovirus transmission, and inter-disciplinary approaches in public health interventions.

In the era of rapid digitalisation, the widespread integration of digital technology into various aspects of daily life has sparked significant interest in understanding its impact on cognitive mental processes. While the emerging data suggests that its influence may be positive or negative, the depth of evidence regarding neurobiological mechanisms remains limited. This review aims to synthesise previously published studies and explore the implications of digital technology components, specifically those resembling mobile technology, internet search engines, and conversational artificial intelligence models, on cognitive functions embedded in the brain’s ability to reorganise itself, known as neuroplasticity. Despite acknowledged limitations, through an exhaustive approach, this paper intends to offer a dynamic perspective on the effects of digital media on the human brain, before the onset of addiction.

This study examines Tim Rowett's YouTube channel, "Grand Illusions," which captures and maintains positive viewer engagement in the digital domain. Through a comprehensive YouTube channel analysis, this paper identifies key factors contributing to its success, including collaboration and influence, educational impact, legacy and continuity, personal style, and community engagement. Rowett, known for his extensive toy collection and in-depth knowledge of their mechanics and history, employs an educational and engaging presentation style that fosters a positive and inclusive online community. His approach entertains and educates, making him a valuable digital resource that inspires viewers of all ages. This research proposes the CECCE (Collaboration, Education, Continuity, Community Engagement) model as a framework for content creators seeking to replicate the success of "Grand Illusions." The study emphasizes the potential of tailored, passionate content to cultivate healthy digital communities and underscores the significant role of digital content creators in shaping online culture. The proposed framework will guide creators to achieve similar success.

This research explores the behaviors of Generation Z consumers in China, particularly focusing on their interaction with companies through social media for the joint creation of value. Adopting a qualitative methodology, the research initially constructs a scale for assessing co-creation of value on social media platforms. Subsequently, it delves into the motivational aspects of users' engagement in these co-creative activities. The study unveils a range of utilitarian and hedonic motivations that drive Generation Z's value co-creation actions on social media. Insights derived from the findings offer both theoretical and practical implications for the field.

Algorithms, indispensable to understand Artificial Intelligence (AI), are omnipresent in social media but users’ understanding of these computational processes and the way they impact their consumption of information is often limited. There is a need for Media and Information Literacy (MIL) research investigating a) how MIL can support Algorithm Literacy (AL) as a subset of competences, and with what working definition, b) what competences users need in order to evaluate algorithms critically and interact with them effectively, and c) how to design learner-centred interventions that foster increased user understanding of algorithms and better response to disinformation spread by such processes. Based on Crossover project research, this paper looks at four scenarios of use by journalists, developers and MIL experts that mirror users’ daily interactions with social media. The results suggest several steps towards integrating AL within MIL goals, while providing a concrete definition of Algorithm-literacy that is experience-based. The competences and design considerations are organised in a conceptual framework thematically derived from the experimentation. This contribution can support AI developers and MIL educators in their co-design of algorithm-literacy interventions and guide future research on AL as part of a set of nested AI literacies within MIL.

Verifying the accuracy of a 3D-printed object involves using an image processing system. This system compares images of the CAD model of the object to be printed with its 3D-printed counterparts to identify any discrepancies. It is important to note that the integrity of the accuracy measurement is heavily dependent on the image processing settings chosen. This study focuses on this issue by developing a customized image processing system. The system generates binary images of a given CAD model and its 3D-printed counterparts and then compares them pixel-by-pixel to determine the accuracy. Users can experiment with various image processing settings, such as grayscale to binary image conversion threshold, noise reduction parameters, masking parameters, and pixel-fineness adjustment parameters, to see how they affect accuracy. The study concludes that the grayscale to binary image conversion threshold has the most significant impact on accuracy and that the optimal threshold varies depending on the color of the 3D-printed object. The system can also effectively eliminate noise (filament marks) during image processing, ensuring accurate measurements. Additionally, the system can measure the accuracy of highly complex porous structures where the pores size, depth, and distribution are random. The insights gained from this study can be used to develop intelligent systems for the metrology of additive manufacturing.

Porous β-tricalcium phosphate (Ca3(PO4)2; β-TCP) was prepared by freeze-drying and the effects of this process on pore shapes and sizes were investigated. Various samples were prepared by freezing β-TCP slurries above a liquid nitrogen surface at −180 °C with subsequent immersion in liquid nitrogen at −196 °C. These materials were then dried under reduced pressure in a freeze-dryer after which they were sintered by heating. Compared with conventional heat-based drying, the resulting pores were more spherical, which increased both the mechanical strength and porosity of the β-TCP. These materials had a wide range of pore sizes from 50 to 200 µm, with the mean and median values both approximately 100 µm regardless of the freeze-drying conditions. Mercury porosimetry data showed that the samples contained small, interconnected pores with sizes of up to 1.24 µm and macroscopic, interconnected pores up to 25.8 µm in size. The effects of non-ionic surfactants having different hydrophilic/lipophilic balance (HLB) values on foaming and pore size were also investigated. Materials made with surfactants having lower HLB values exhibited smaller pores and lower porosity whereas higher HLB surfactants gave higher porosity and slightly larger macropores. Even so, the pore diameter could not be readily controlled solely by adjusting the HLB value. The findings of this work indicated that high porosity (75%) and good compressive strength (>2 MPa) can both be obtained in the same porous material and that foaming agents with HLB values between 12.0 and 13.5 were optimal.

With the increasingly online exposure of urban public spaces, the new concept of "Internet-celebrity cities" has emerged in China. The online internet-famous sites are the main characteristics of "Internet-celebrity cities". To fully understand online users' preferences in such kind of public spaces, this article took 27 typical riverfront internet-famous sites (RIFS) in Changsha city (China), as an example. Through the online images and review comments on social media platform "Xiaohongshu", the study analyzed users’ perception of RIFS specially on visual and emotional preferences. It revealed the following findings:(1) The popularity of RIFS had a significant head effect and there were far more positive emotions than neutral and negative emotions in review comments. (2) According to 5 different categories of RIFS: modern buildings with river views, restaurants with strong visual impact became the main attractions on commercial RIFS. The art exhibition RIFS attracted visitors to experience traditional culture and highlight their aesthetic pursuits. In the historical and cultural RIFS, people preferred to see the historical buildings with surrounding natural environment, as well as river and mountains views. Ecological Recreational RIFS showed the similar results with the uncultivated RIFS, for the main focus was on the ecological environment, a broader vision and the specific atmosphere. Moreover, the uncultivated RIFS showed more diversified attraction points. This study can provide a new perspective on the waterfront vitality and can offer a targeted and attractive manner for waterfront regeneration that are different from traditional methods.

Studies on social media (SM) and disaster management (DM) have mainly focused on the adap-tation, application and use of SM in each stage of DM. With the widespread availability and use of SM, the effective utilisation of SM in DM is impeded by various challenges, but not yet com-prehensively researched. Therefore, this paper aims to identify the challenges, as well as the strategies to overcome the challenges and categorises them into a classified model. The study adopts a systematic literature review to present and analyse the challenges and strategies for us-ing SM in DM. Utilising prominent databases, 72 publications were carefully selected and ana-lysed qualitatively using content analysis. The findings revealed four key challenges to its users: spread of misinformation; insufficient human resources to manage SM use; lack of trust in infor-mation and authorities; and, poor information quality and content of messages. The study identi-fied several strategies to overcome challenges, which can be classified into three sectors of the SM community: individuals, organisations, and SM companies. These findings contribute to enhanc-ing the effective utilisation of SM in DM by community practitioners. Furthermore, this study provides insight into the current status of knowledge and identifies the research gaps around SM in DM for future research.

Vaccines decrease morbidity and mortality. Nevertheless, their benefits depend on public response. During COVID-19, vaccine hesitancy and refusal were rampant, threatening public health. A thorough understand-ing of opponents' arguments is required to address the diffusion of unreliable information on social media and prevent vaccine hesitancy from developing into vaccine refusal. Accordingly, the article examines vac-cine opponents' justifications on social media. Textual content analysis of reader comments on three health-related Israeli Facebook pages was conducted. Data collection encompassed the Israeli COVID-19 vaccination period from October 2020 to May 2022. The comments were analyzed according to the health beliefs model (HBM). We found that vaccine opponents were characterized by low perceptions of the severity of the disease combined with high perceptions of the damages of the vaccine; low perceived benefits of vac-cine compliance; vaccine hesitancy and fear along with public distrust as barriers to change; and call for ac-tion to resist the vaccine and spread related anti-establishment views on the web. As vaccination hesitancy was found to develop into public distrust in the state systems and escalate into conspiracy beliefs and an-ti-vaccination activism, its early detection may prevent future vaccine resistance.

Cell-culture meat is a novel concept to replace traditional meat produced from animals, and to satisfy rising food demands due to the world population growth. It is still a young field and requires to solve technical issues including cell sources and types, efficient culture for large scale production, taste and texture for customer satisfaction. The current review summarized traditional beef meat production and evaluation methods for customer satisfaction. In particular, serum biomarkers for beef meat evaluation are discussed, which can be applicated for cell-culture meat production.

Global warming, exacerbated by greenhouse gas emissions from non-green product manufacturing, necessitates a shift towards green production to safeguard ecosystems and finite resources. The United Nations Environment Programme emphasizes the importance of environmental considerations in corporate ESG criteria. Despite the higher costs of designing and manufacturing green products, which deter some companies and lead to greenwashing, efforts persist to promote sustainable goods. This study explores enhancing consumer repurchase intentions for green products through social media marketing, emphasizing green values, environmental concerns, brand image, and involvement. Findings reveal social media's role in boosting these factors, thus encouraging green repurchases. Insights are valuable for green businesses, social media groups, environmental agencies, and future research.

NiV2O6 thin films were grown on glass slides with varying thicknesses using the nebulizer spray pyrolysis. The impact of thickness on the thin films' optical, structural, morphological, and electrical characteristics was systematically investigated. The X-ray diffraction and micro-Raman analysis confirmed the formation of the triclinic NiV2O6 system. Surface morphology and roughness variations in the as-deposited NiV2O6 films were studied using scanning electron microscopy (SEM) and a profilometer. Optical properties, including optical band gap (Eg), extinction coefficient (k), absorption coefficient (α), and refractive index (n), were determined through optical reflectance and transmittance measurements. The optical energy gap of the as-deposited NiV2O6 films decreased from 2.3 eV to 1.9 eV with increased layer thickness. Furthermore, the photo-detectivity of the films demonstrated an enhancement corresponding to the prolonged spray time. The sensitivity values obtained for visible irradiation are 328, 511, and 433 for samples S1, S2, and S3, respectively. The obtained results are imputed to the specific porous microstructure.

In this paper, we present an experimental procedure to enhance the dimensional accuracy of fabrication via Stereolithography (SLA) of features at the micro-scale. Using a custom benchmark part, deviations in feature dimensions (micro-pores diameters and depths) were detected and measured by confocal microscopy. Samples characterization and experimental observations allowed the identification of inaccuracy sources, mainly due to the laser beam scanning strategy and to the incomplete removal of uncured liquid resin in post-processing (i.e., IPA washing). As a technology baseline, the measured dimensional errors on pores diameters were up to -46%. A compensation method of the nominal laser spot diameter (85m) was defined and implemented resulting in relevant improvements in dimensional accuracy of 9.8% and 11.3% on full-open pores diameter and depth, respectively. Further investigation was performed on a customized test part to adjust the calibration procedure. The measurements revealed that the estimate of the laser beam spot size is 968m. Measurements on micro-pores having different sizes revealed that a constant compensation parameter (i.e., C=85, 96, 120m) is not fully effective at the micro-scale, where average errors still remain at -24%, -18.8%, and -16% for compensations equals to 85, 96 and 120m, respectively. A further experimental campaign allowed the identification of an effective nonlinear compensation law where the compensation parameter depends on the micro-feature size C= f (D). Results show a sharp improvement in dimensional accuracy on micro-pore fabrication, with errors consistently below +8.2%. The proposed compensation method can be extended for the fabrication of any micro-features without restrictions on the specific technology implementation. Concerning the inaccuracy introduced by the laser path, experimentation with a customized part allowed the optimization of the part orientation to reduce the errors and their differences along the X and Y machine axes.

We discuss a central concept of nanothermdynamics; the subdivision potential. We explain how it can be measured or calculated for some typical ensembles, as this has been disputed in the literature. We proceed to discuss its meaning for particular systems, and predict scaling laws for three ensembles. The laws depend on the small system geometry in a predictable way for an ideal gas model with surface adsorption. We provide new equations which relate the subdivision potential to experimental investigations, and give expressions for grand canonical ensembles of spheres, cylinders, slit pores and fluids confined in porous media. The subdivision potential is not compatible with the popular Hadwiger theorem in geometry, and can therefore not be described by a Minkowski set of variables. It is equivalent to Gibbs descriptions when shape- and size variables are defined.

This paper examines the interplay between media and the “social side of soils” whereby climate change action implicates individual and collective capacity to adapt, participate in groups or organizations, networks, and respond to challenges and opportunities across a system. The context examined here is Canadian agriculture, and soil health initiatives in the province of Ontario. Our review of relevant literature points to a knowledge gap on the role of the media in enabling climate action in the Canadian agricultural sector with a focus on soil management practices. This study conducted a media content analysis of 100 English-language news articles published between 2022 and 2024 and conducted 31 surveys with media professionals. Approximately one-quarter of the screened news articles contained any relevant coverage of soil health-related climate change mitigation issues. Journalist surveys identified the resource constraints on soil health media coverage with a wide range of traditional and Internet-based journalism on climate change issues, motivated particularly by crisis communication and one-off “parachute reporting”. Going forward, the engagement of key stakeholders of soil health in Canada such as farmers for media and communication about climate change mitigation needs attention. Key policy structures at the federal and provincial levels can help to make this happen.

This study concerns the transport and retention of polydisperse micron-sized (16 ± 6 µm) of microplastics (MPls) in porous media under varying flow rate conditions. Sorption kinetics were modeled using first-order reversible and irreversible kinetic sorption models, with sensitivity analyses providing insights into each sorption parameter's effect. Both numerical modeling and experimental measurements were employed to assess sand filter retention rates. The impact of flow rate on sorption reveals variations in distribution coefficient (Kd), mass transfer coefficient (β), and irreversible sorption rate (K1). Lower flow rates are correlated with higher Kd and β values, indicating an increase in sorption and diminished mass transfer rates. The findings revealed that an increase in Kd resulted in a more gradual sorption process with a decrease in peak concentration, whereas changes in β influenced the rate of sorption and peak concentration to a lesser extent compared to Kd. Lower K1 values are associated with higher peak concentrations and decreased retention efficiency. Retention rates were evaluated by a numerical model and found as 28 ± 1% at a flow rate of 31 ml min⁻¹ and 17 ± 1% at 65 ml min⁻¹. The introduction of MPls into soil environments has been noted to modify transport dynamics into soil. As a result, these alterations effects hydrological characteristics of soil, thereby impacting quality of groundwater and agricultural output. The mean absolute error (MAE) of 6% between modeled and observed retention rates suggests minor discrepancies. This study highlights the importance of examining retention efficiency and the accuracy of numerical models in porous media during MPl transport.

This study introduces an efficient strategy for synthesizing polyhydroxyurethane-based multicomponent hydrogels with enhanced rheological properties. In a single-step process, 3D materials composed of Polymer 1 (PHU) and Polymer 2 (PVA or gelatin) were produced. Polymer 1, a crosslinked polyhydroxyurethane (PHU) grew within a colloidal suspension of Polymer 2, forming an interconnected network. The synthesis of Polymer 1 utilized a Non-Isocyanate Polyurethane (NIPU) methodology based on the aminolysis of bis(cyclic carbonate) (bisCC) monomers derived from 1-thioglycerol and 1,2-dithioglycerol (monomers MA and ME, respectively). This method, applied for the first time in Semi Interpenetrating Network (SIPN) formation, demonstrated exceptional orthogonality, since the functional groups in Polymer 2 do not interfere with Polymer 1 formation. Optimizing PHU formation involved a twenty-trial methodology, identifying influential variables such as polymer concentration, temperature, solvent (an aprotic and a protic solvent), and the organo-catalyst used [a thiourea derivative (TU) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)]. The highest molecular weights were achieved under near-bulk polymerization conditions using TU-protic and DBU-aprotic as catalyst-solvent combinations. ME-based PHU exhibited higher (M_w ) ̅ than MA-based PHU (34,100 Da and 16,400 Da, respectively). Applying the enhanced methodology to prepare ten multicomponent hydrogels using PVA or gelatin as the polymer scaffold revealed superior rheological properties in PVA-based hydrogels, exhibiting solid-like gel behavior. Incorporating ME enhanced mechanical properties and elasticity (with loss tangent values of 0.09 and 0.14). SEM images unveiled distinct microstructures, including a sponge-like pattern in certain PVA-based hydrogels when MA was chosen, indicating the formation of highly superporous interpenetrated materials. In summary, this innovative approach presents a versatile methodology for obtaining advanced hydrogel-based systems with potential applications in various biomedical fields.

To establish simulated micro-gravity conditions, biological organisms are placed on a simulated microgravity system, which primarily rotate in two or three dimensions and rely on slow sedimentation with latency to detect gravity. Fluid dynamics arise as a consequence of rotation of the chambers with in which the cells are filled. To minimize the effects of centrifugal forces, it is necessary to position the samples as close to the center of rotation as possible. Strong shear forces and velocities within the vessel can have an adverse impact on cells, making this a critical topic in cell biology. During experimental investigation, this specific phenomenon is not apparent, but numerical modelling readily illustrates and is not widely analyzed in literature's. Furthermore, bulk flask are frequently employed on random positioning machines (RPM), not merely because they demand a substantial quantity of reagents. The flask presented in the study can be easily developed and fitted in conventional cell culture plates containing medium and reagents similar to those used in ground experiments, thus allowing it to remain close to the center of rotation. In the present study, a series of fluid dynamics simulations are performed to examine the impact of shear forces within the microvessel presented under varying conditions using a foreign medium condition, and these results are compared with existing vessels by observing the effects of shear forces and maximum velocity zones.

Contrast-Induced Acute Kidney Injury (CI-AKI) remains a frequent iatrogenic condition since radiological procedures using intra-vascular iodinated contrast media (CM) are being widely administered for diagnostic and therapeutic purposes. Despite the improvement of the medical healthcare system worldwide, CI-AKI is still associated with direct short-term and indirect long-term outcomes including increased morbidity and mortality, specially, in patients under-lying pre-existing renal function impairment, cardiovascular disease or diabetes that could rap-idly progress into Chronic Kidney Disease. Although the RIFLE (Risk, Injury, Failure, Loss, End-Stage Kidney Disease), AKIN (Acute Kidney Injury Network) and KDIGO (Kidney Disease Improving Global Outcomes) clinical criteria and recommendation guidelines are based on tra-ditional “gold standard” biomarkers known as serum creatinine, glomerular filtration rate and urinary output, new reliable serum and urinary biomarkers are still needed for an effective uni-fied diagnostic strategy for AKI. Starting from previous and recent publications on the benefits and limitations of validated biomarkers responding to kidney injury, glomerular filtration and inflammation among others, this review unravels the role of new emerging biomarkers used alone or in combination, as reliable tools for early diagnosis and prognosis of CI-AKI, taking into account patients and procedures-risk factors towards a new clinical perspective.

Mangrove plant seedling cultivation is crucial for the protection, management and restoration of mangrove ecosystem. In this study, we focused on Kandelia obovata, a typical mangrove, and evaluated nursery cultivation with different combinations of three salinity levels (S1: 0 ppt, S2: 10 ppt, and S3: 20 ppt), three genealogies (EZD, JX, and YZ), and five growth media (M1: 100% loess, M2: 100% sandy, M3: 50% loess + 50% sandy, M4: 40% loess + 40% sandy + 20% peat, and M5: 40% loess + 40% sandy + 20% coir), by measuring the growth parameters such as mortality rate, seedling height, diameter, and biomass partition. These growth indexes were significantly affected by salinity and medium, and genealogies also had significant effects on mortality rate and biomass accumulation. S2 or S3 both had lower mortality and higher growth indexes than S1. M1 was the medium that increased seedlings height, diameter and biomass the most and had the lowest death rate. EZD and JX were also higher levels than YZ in these indicators, but the difference between them was not obvious. S3, M1, and EZD consistently performed well in fuzzy evaluation and quality assessment. Furthermore, combinations involving these treatments also produced highly favorable results. These results furnish both a theoretical and practical foundation for advancing nursery cultivation techniques and germplasm breeding of K. obovata in mangroves.

Abstract: Social media has become a vital tool in ensuring productivity among Undergraduates, as studies have shown an increased number of users globally. This study assessed the impact of social media usage on undergraduates’ academic performance and working memory. Participants from three different universities such as the University of Georgia (UG), Eastern European University (EEU), and Batumi State University (BSU) completed this study using online google forms. UG and EEU are in the capital city, and BSU is in Batumi City. The study questionnaires were approved by the institutional review board before the data collection. Descriptive analyses were assessed for all study populations, characteristics, frequencies, percentages, means, and standard deviations using Statistical Package for Social Science (SPSS Inc., Chicago, IL, version 25.0 for Windows) software. 41.3% were male students, as most of the participants were foreign students living and studying in Georgia. Male students had the risk of ‘conflict’ with families and friends because of social media. Female students are at increased risk of using social media as an ‘escape’ from negative feelings. 89.7% of students that perform physical activities, considering their academic workload had the risk of preoccupation complaints. 87.9% felt dissatisfied regularly because they wanted to spend more time on social media. Utilization of social media differed based on the characteristics of the participants such as age, gender, and geography. We observed the increase in prevalence of social media addiction, its effect on academic performance and working memory among undergraduate students.

Single-particle inductively coupled plasma mass spectrometry (spICP-MS) has been used for particle size measurement of diverse types of individual nanoparticles and micrometer-sized carbon-based particles, such as microplastics. However, its applicability to the measurement of micrometer-sized non-carbon-based particles such as silica (SiO2) is unclear. In this study, the applicability of spICP-MS to particle size measurement of non-porous/mesoporous SiO2 micro-spheres with a nominal diameter of 5.0 µm or smaller was investigated. Particle sizes of these microspheres were measured using both spICP-MS based on a conventional calibration approach using an ion standard solution and scanning electron microscopy (SEM) as a reference technique and the results were compared. The particle size distributions obtained using both techniques were in agreement within analytical uncertainty. The applicability of this technique to the detection of metal-containing protein-binding mesoporous SiO2 microspheres was also investigated. Bound iron (Fe)-containing proteins (i.e., lactoferrin and transferrin) of mesoporous SiO2 microspheres were detected using Fe as a presence marker for the proteins. Thus, spICP-MS is applicable to the particle size measurement of large-sized and non-porous/mesoporous SiO2 microspheres; it has considerable potential for element-based detection and qualification of bound proteins of mes-oporous SiO2 microspheres in a variety of applications.

Abstract Purpose Despite a considerable amount of literature on dual-energy-CT(DECT) iodine uptake of the head and neck, the physiologic iodine uptake of this region has not been defined yet. This study aims to establish reference values for the iodine uptake of healthy organs to facilitate clinical application. Material and Methods: Consecutive venous DECT scans of head and neck were reviewed, and unremarkable exams were included (n=617). 35 region of interest measurements were performed in 16 anatomical regions. Iodine uptake was compared among different organs/tissues and subgroup analysis was performed (male [n=403] vs female [n=214]; young [n=207] vs middle-aged [n=206] vs old [n=204]; normal weight [n=314] vs overweight [n=196] vs obese [n=107]]). Results: Overall mean iodine uptake values ranged between 0.5 and 9.4mg/ml. Women showed higher iodine concentration in the cervical vessels and higher uptake for the parotid gland, masseter muscle, submandibular glands, sublingual glands, palatine tonsils, tongue body, thyroid gland, and the sternocleidomastoid muscle than men (p0.04). With increasing age, intravascular iodine concentrations increased as well as iodine uptake for cerebellum and thyroid gland, while values for tongue and palatine tonsils were lower compared to younger subjects (p0.03). Iodine concentrations for parotid glands and sternocleidomastoid muscles decreased with higher BMI (p0.004), while normal-weighted patients showed higher iodine values inside the jugular veins, other cervical glands, and tonsils versus patients with higher BMI (p0.04). Conclusion: Physiologic iodine uptake values of cervical organs and tissues show gender-, age-, and BMI-related differences, which should be considered in clinical routine of head and neck DECT.

The aim of the study is to explore how sharing status updated and receiving Likes on Facebook, as a form of positive social feedback, correlates with current and perceived changes in Quality of Life (QoL) Sample consisted of 1577 adult Facebook users (76.3% females; 65.9% aged 18-24, 21.9% aged 25-30, 12.3% aged > 30 years old). The study employed a longitudinal approach, collecting Facebook data from adult users over a 12-month period using the Graph API. Data were divided into 12 monthly segments. Two monthly indicators were calculated: the percentage of textual status updates and the average number of Likes per post. Current and perceived changes in Quality of Life (QoL) were administered as self-report measures. The findings indicated a positive correlation between the frequency of textual Facebook posts and the average received Likes. Furthermore, receivign more Likes was positively associated with a higher current QoL, and perceived improvements in QoL correlated with an increase in Likes over time. The study suggests that online positive social feedback, measured through Likes on Facebook, is associated with both current QoL and perceived improvements in QoL among adult Facebook users. This highlights the potential impact of online social interactions on individual well-being.

Helicobacter Pylori (H. Pylori) is a common pathogen with high prevalence of infection in human populations. Diagnosis of H. Pylori infection is critical for its treatment, eradication, and prognosis. Biosensors have been demonstrated to be powerful for rapid onsite detection of pathogens, particularly for point-of-care test (POCT) scenarios. In this work, we propose a novel optical biosensor, based on nanomaterial porous silicon (PSi) and photonic surface state Tamm Plasmon Polariton (TPP), for detection of cytotoxin-associated antigen A (CagA) antigen of H. Pylori bacterium. We fabricated the PSi TPP biosensor, analysed its optical characteristics and demonstrated through experiments towards sensing of CagA antigen, that TPP biosensor has sensitivity of 100 pm/(ng/ml), limit of detection of 0.01 ng/ml, and specificity in terms of positive-to-negative ratio of more than six. From these performance factors, it can be concluded that TPP biosensor can serve as an effective tool for diagnosis of H. Pylori infection, either in analytical labs or in POCT applications.

In general sound waves propagate radially outwards from a point source. These waves will continue in the same direction, decreasing in intensity, unless a boundary condition is met. To arrive at a universal understanding of the relation between frequency and wave propagation within spatial boundaries, an analysis and comparison is made between the results of Chladni plate experiments and Chladni plate simulations. We consider a finite range of frequencies and plate geometries and present a model that has been shown to successfully recreate the nodal line patterns to a first approximation. We discuss the benefits of such a model and the future work necessary to develop the model to its full predictive capacity.

In this work, we conducted a numerical study on the cavitation flow around a circular cylinder through the implementation of a porous coating. The primary objective addressed the effectiveness of utilizing a porous surface to control cavitation. We analyzed the cavitation dynamics around the cylinder and the hydrodynamic performance at different permeability levels of the porous surfaces. The flow was governed by the density based homogeneous mixture model and the volume penalization method was used to deal with the porous layer. A high-order accurate numerical method was adopted for the simulation of the cavitating flow through solving the preconditioned multiphase equations. The results revealed that the application of porous layer led to effective suppression of the cavitation vortex shedding. In addition, a reduction of the shedding frequency was obtained which accompanied by thinner and elongated vortices in the wake region of the cylinder. With the proper porous layer, the inception of the cavitation on the cylinder was suppressed and the amplitude of pressure pulsations due to the cavitation shedding mechanism was mitigated.

As brachycephalic dog breed ownership increases, there is a growing concern for the welfare of these breeds due to extreme brachycephalism. Understanding the motivations and behaviours of those choosing to own these breeds is important if we wish to address these concerns. The aim of this study was to investigate how owners of brachycephalic and non-brachycephalic dog breeds use social media dog breed groups to discuss common health issues. The purpose of Facebook posts in relation to common health issues, owner awareness of health issues, and the role of Facebook facilitated social support were explored between brachycephalic and non-brachycephalic dog owners. Twelve Facebook breed groups were selected (brachycephalic breed groups, n=6, non-brachycephalic breed groups, n=6). Using key word searches we extracted the first twenty posts from each group. Thematic analysis revealed three overarching themes: advice seeking, advice giving and community bonding mechanisms. Whilst the purpose of posting did not differ between groups, non-brachycephalic owners appeared to display greater awareness of breed-specific health issues, whilst social support played a more prominent role in brachycephalic groups. This research highlights that social media groups can act as platforms for knowledge exchange and emotional support. These could be utilised by owners, veterinarians and welfare organisations to more effectively enhance dog health and wellbeing.

The automotive industry needs to improve energy efficiency rapidly to achieve carbon neutrality while creating a safe, secure, comfortable driving environment for customers. Porous sound-absorbing materials and porous thermal insulators are typically used to satisfy these requirements despite limitations in mass and space. While these porous materials are similar, the microstructures they offer for high performance differ in the size and connectivity of their fluid phases, which enhances the difficulty of achieving excellent sound absorption and thermal insulation in the same material. In this study, a hydrophobic cellulose nanofiber–poly(methylsiloxane) xerogel composite was developed using computational microstructure modeling. This porous material has high porosity and excellent thermal insulation and sound absorption properties.

IP Multimedia Subsystem (IMS) supports high-speed transmission of multi-media like data, audio, and video between mobiles and other wireless devices. IMS is the most suitable for multimedia communication across multiple networks using the Internet of Things (IoT) and cloud computing. IoT-IMS can efficiently manage the huge amount of data generated by smart devices for audio-video during live streaming applications. During these services, the main problem is that an intruder can launch a Session Initialization Protocol (SIP) messages flooding attack on IMS that does not have the functionality to prevent itself from these types of attacks. In this paper, an intrusion detecting and preventing system (IDPS) is proposed that effectively detects the register flooding and spoofing attacks using SIP messages. We proposed a watermark embedding algorithm on the user side and an extraction algorithm on receiving side. A test-bed is set up for IMS where we have considered four different scenarios to evaluate the IDPS approach as compared to counterparts. Results illustrate the dominance of our scheme in terms of response time, register flooding attack detection ratios, CPU load utilization, fault detection ratio, and memory utilization. The fault detection ratio averagely 98.18

In this work, oxygen-doped g-C3N4 mesoporous nanosheets (O-CNS) were synthesized via a facile recrystallization method with the assistance of H2O2. The crystal phase, chemical composition, morphological structure, optical property, electronic structure and electrochemical property of the prepared O-CNS samples were well investigated. The morphological observation combining with nitrogen adsorption-desorption results demonstrated that the prepared O-CNS samples possessed nanosheets-like morphology with porous structure. The O doping into g-C3N4 resulted in the augment of specific surface area, which could provide more active sites for photocatalytic reaction. Simultaneously, the visible-light absorption capacity of O-CNS samples was boosted owing to the regulation of O doping. The built energy level induced by the O doping could accelerate the migration rate of photoinduced carriers, and the porous structure was most likely to speed up the release of hydrogen during photocatalyic hydrogen process. Resultantly, the photocatalytic hydrogen production rate of the optimized oxygen-doped g-C3N4 nanosheets reached up to 2012.9 μmol•h-1•g-1, which was 13.4 times higher than that of bulk g-C3N4. Thus, the significantly improved photocatalytic behavior was imputed to the porous structure, the augment of active sites, and the enhancement of visible light absorption and charge separation efficiency.

This research investigates the impact of social media monitoring on Online Reputation Management (ORM) within Zimbabwe’s life assurance industry. Employing a mixed-methods approach, data was collected through questionnaires from 464 participants, yielding a response rate of 92.8%. Ethical considerations were meticulously addressed, with informed consent and confidentiality safeguards. Data analysis involved organizational and statistical techniques, including Structural Equation Modeling (SEM) for theoretical exploration. Descriptive statistics unveiled demographic insights and patterns in social media platform usage. Internal consistency assessments, Exploratory Factor Analysis (EFA), and Principal Component Analysis (PCA) informed the refinement of research instruments. The SEM analysis established significant relationships and moderation effects, providing empirical support for several hypotheses. Findings indicate that employees’ attitudes toward social media monitoring positively influence ORM, while perceived behavioural control exhibits a non-significant impact. Intriguingly, management commitment, though positively related to ORM, moderates the relationship with a negative effect. The study contributes to the understanding of ORM determinants, emphasizing the need for nuanced strategies considering both individual and organizational factors. The recommendations underscore the importance of management commitment and employee training for effective social media utilization. Future research avenues include exploring training interventions, delving into the dynamics of perceived behavioural control, and investigating emerging social media platforms’ impact on ORM.

In the era of digital information consumption, YouTube has emerged as a prominent platform for disseminating knowledge across various domains. One such area that has gathered significant attention is teeth whitening, with a plethora of videos offering insights into professional proce-dures, home remedies, and personal experiences. This study delves into the vast landscape of teeth whitening content on YouTube, meticulously categorizing videos into professional and amateur domains. The aim is to critically analyze the information presented, considering its accuracy, re-liability, and potential impact on public perceptions and oral health choices. A total of 100 videos in Greek (n1= 73) and in English (n2= 27) were studied. The analysis was based on views, likes, publication year, duration, presence of background music, and the presence of a description. The completion date of the search was October 7, 2023. Professional videos predominantly present whitening as a painless, conservative, and economical procedure, emphasizing safety measures. Bleaching mechanisms involving hydrogen peroxide and carbamide are explored, with various application techniques discussed, including whitening strips, splints, and in-office procedures. Contradictory findings on the efficacy of home versus in-office treatments are highlighted. In-ternal and external discoloration factors are delineated, with contraindications specified. Amateur videos, garnering greater public appeal, present personal experiences, product promotions, and homemade remedies, reflecting a concerning trend of misinformation. The analysis incorporates viewer engagement metrics, emphasizing the impact of non-professional content. As social media platforms play an increasingly influential role in shaping healthcare narratives, understanding the nuances of dental discourse on YouTube becomes crucial for both practitioners and the public. This exploration encompasses a spectrum of topics, ranging from the chemical intricacies of bleaching agents to the societal dynamics influencing viewer preferences. By unraveling the complexities of online dental information, this study seeks to contribute valuable insights to the evolving land-scape of oral health education in the digital age. Future research should adopt a multi-platform approach and explore the dynamic interaction between content creators and viewers for a more holistic comprehension of online dental information.

The study focuses on a novel porous TiNi-based material for ophthalmic orbital implants which was produced by self-propagating high-temperature synthesis (SHS) and, after proper surface modification, possesses a specific microstructure of its surface pores, which makes it attractive for biomedical use in implants. After preparation via SHS, the obtained porous TiNi material was etched in acidic environment, to get rid of its surface Ti2Ni secondary-phase particles. This was found to improve the material’s surface morphology, adding micro-roughness to its macro-rough pores. As a result, cell growth tests conducted on the material demonstrated improved cell adhesion and growth kinetics on such a porous material with improved roughness. Finally, the material was tested in vivo as an ophthalmic orbital implant, demonstrating good biocompatibility, good degree of biointegration with surrounding eyeball tissues, and no signs of rejection after as long as 180 days. Thus, the novel porous TiNi-based material shows promise for its use in ophthalmic implantology, for instanse for manufacturing musculoskeletal stumps of the eyeball after evisceration, as it is biocompatible, has a high tissue-implant integration potential and demonstrates reduced risks of exposure and rejection of the implant.

Social media has become more popular in the last few years. It has been used in public health development and healthcare settings to promote healthier lifestyles. Given its important role in today's culture, it is necessary to understand its current trends and future directions in public health. This review aims to describe and summarize how public health professionals have been using social media to improve population outcomes. Additionally, it discusses potential future directions on how social media can be used to improve population health. The findings showed how social media has been used as a tool for research, designing and implementing health campaigns, messaging, and health promotion. In addition, social media integration with Artificial Intelligence (AI) and Generative Pre-Trained transformers (GPT) can have a big impact and offer an innovative approach to tackle the problems and difficulties in health informatics. These innovations might improve patient participation, individualized assistance, and care experiences. The research showed how likely social media will keep growing and evolving and, if used effectively, have the potential to help close public health gaps across different cultures and improve population health.

This systematic literature review explores the impact of social media use (SMU) and practices (SMPs) on team feedback (TF) and performance (TP) in construction project management. The study delves into the intricate dynamics between SMU and SMPs and their influence on communication, collaboration, and stakeholder engagement within construction projects. It investigates how these digital practices reshape the traditional methods of team interaction, feedback mechanisms, and overall team performance in the complex and multifaceted environment of construction sites. The review aims to provide a comprehensive understanding of the role of social media in modern construction project management, highlighting its significance in enhancing team communication, coordination, and performance. This research is crucial for understanding the evolving landscape of construction management, where digital tools and platforms are increasingly integral to successful project outcomes. The findings are expected to offer valuable insights for professionals in the construction industry, helping them leverage social media effectively for improved project management and team collaboration.

This work deals with a novel porous TiNi-based material for ophthalmic orbital implants that was produced by high-temperature synthesis (SHS) and possesses a specific microstructure of its surface pores, which makes it attractive for biomedical use in implants. After preparation via SHS, the obtained porous TiNi material was etched in acidic environment, to get rid of its surface Ti2Ni secondary-phase particles. This was found to improve the material’s surface morphology, adding micro-roughness to its macro-rough pores. As a result, cell growth tests conducted on the material demonstrated improved cell adhesion and growth kinetics on such a porous material with improved roughness. Finally, the material was tested in vivo as an ophthalmic orbital implant, demonstrating good biocompatibility, good degree of biointegration with surrounding eyeball tissues, and no signs of rejection after as long as 180 days. Thus, the novel porous TiNi-based material shows promise for its use in ophthalmic implantology, for instanse for manufacturing musculoskeletal stumps of the eyeball after evisceration, as it is biocompatible, has a high tissue-implant integration potential and demonstrates reduced risks of exposure and rejection of the implant.

Stormwater management is especially critical for urbanized landscapes that border surface waters and therefore must be monitored accurately to meet permitting requirements and mitigate environmental impact. To assess the impact of stormwater pollutants from the university grounds of a large midwestern campus, we pursued the following two objectives. First, to empirically quantify the concentration of four pollutants in campus stormwater (total suspended solids (TSS), total phosphorus (TP), total Kjeldahl nitrogen (TKN), and chlorides (Cl-)) and compare these observations to international averages and modeled values from the Source Loading and Management Model for Windows (WinSLAMM v10.5.0), used by the university for stormwater monitoring. And second, we sought to quantify the steady state infiltration rate of two porous pavements (concrete and asphalt), and two concrete porous paver surfaces (with interlocking aggregates and without) constructed by the university to mitigate environmental impact. Results showed low TSS concentrations relative to other municipalities and modeled results. The discrepancy between modeled and empirical values is argued to arise from spatial and temporal constraints of sampling. Conversely, concentrations of TP, TKN, and Cl-, were at similar levels to reference areas and WinSLAMM, with TP and TKN likely sourced from mainly organic, non-particulate sources (e.g. leaf litter). Of the four mitigation systems, the porous pavers with aggregates had the highest infiltration rate compared to the other three porous pavements, although compounding factors such as age and landcover may have influenced performance differences.

Increased CO2 emissions and air pollution impact the environment and human health. In this manner, new functionalized polyaminal-based polymers are synthesized via a one-pot polycondensation reaction of melamine with aldehyde monomers 2-bromo-1-naphthaldehyde and 2-hydroxy-1-naphthaldehyde to yield bromine- hydroxyl- functionalized polymer networks PAN-BrNA and PAN-HNA, respectively. The polyaminals porosity parameters were investigated and applied as an adsorbent for CO2 capture. FTIR, solid-state 13C NMR, and X-ray diffraction verified the PANs structure development. A scanning electron microscope and N2 adsorption-desorption methods were utilized to identify the porous properties of the polymers at 77 K. The Brunauer-Emmett-Teller (BET) surface area of PAN-BrNA and PAN-HNA is (16.6990 m2/g) and (716.7568 m2/g), respectively. At 273 K, PAN-BrNA and PAN-HNA can take CO2 gas up to (4.42786 cm3/g) and (47.55 cm3/g), respectively. The findings show that inserting functional groups has a significant impact on surface area and porosity parameters, as well as CO2 uptake.

Vulnerable carotid plaques are responsible for 20% of the ischemic strokes. The identification of those asymptomatic carotid plaques that will become symptomatic is essential but remains unclear. Our main goal was to investigate whether the amount of the peri-carotid adipose tissue, estimated by the extra-media thickness (EMT) is associated with the atherosclerotic characteristics at the carotid bifurcation in patients with PAD. An observational, prospective, single-center, longitudinal study was conducted. 177 patients performed carotid Doppler-ultrasound. The following data was collected: EMT, intima-media thickness (IMT), presence of carotid plaques, area of the highest plaque, and grade of internal carotid stenosis. From each carotid bifurcation a right and left EMT was determined. We analyzed both the mean EMT (calculated as the mean between the right and the left EMT) and the EMT ipsilateral to the carotid bifurcation. The presence of carotid plaques was associated with a higher mean EMT, [Median=1.14; IQR=0.66 versus Median=0.97; IQR=0.40; p=.001]. A positive correlation was found between mean EMT and IMT (right: ρ=.20; p=.010; left: ρ=.21; p=.007) and between mean EMT and area of the largest carotid plaque (right: ρ=.17; p=.036; left: ρ=.22; p=.004). Left carotid stenosis ≥ 70% was associated with higher mean EMT. [Median=1.55; IQR=0.68 versus Median=1.00; IQR=0.46; p=.019]. Patients with “acute culprit” carotid stenosis had a higher ipsilateral EMT [Left ipsilateral EMT: Median=1.46; IQR=0.63; “non-acute”: Median=0.94; IQR=0.43; p=.009; Right ipsilateral EMT: Median=2.25; IQR=0.62; “non-acute”: Median=1.00; IQR=0.51; p=.015]. This difference was not found in the contra-lateral EMT. Six months after the neurologic event, EMT ipsilateral to an “acute culprit” carotid stenosis decreased (p=.036). The amount of peri-carotid adipose tissue, estimated with EMT was associated with atherosclerosis at the carotid arteries. In particularly EMT could be a non-invasive marker of “acute culprit” carotid stenosis, easily determined in clinical practice. These findings may have implications in personalized medicine, for the determination of the best treatment approach.

Butadiene-Styrene copolymer (SBS) to improve the mechanical and deformation properties of the binder used in its manufacture. However, the high cost and variability of processing limit its performance. A secondary modifier to solve these problems is nano and micro materials that allow the generation of unique properties in polymeric systems. Based on this, this study experimented with fly ash micro filler ((FA) in low proportions as a binder modifier with SBS for use in PA mixes. The FA residue is considered in 3% and 5% dosages on a base binder with 5% SBS. Rheological results show that FA improves classical, linear viscoelastic (LVE), and progressive damage properties compared to the modified binder. The PA blends with FA reduced binder runout, resulting in a thicker film, showing better abrasion resistance in dry and wet conditions. Samples with FA increase the post-cracking energy in indirect tension due to higher ductility. However, they decrease the fracture energy due to higher cracking before failure. In addition, the FA manages to decrease the difference between dry and wet ITS.

This paper presents how social media platforms and their components could be integrated into the KMS for the purpose of managing and sustaining Somali Indigenous knowledge (IK). The discovery of knowledge and its utilization is now fuelled by the advancement of technology, which connects users to external sources through using different platforms. The rapidly increasing use of SM and mobile technologies create opportunities to form knowledge networks that can facilitate the process of creating, preserving, and sharing knowledge and skills that are unique to communities in the Somali context. Somali society being an oral society with rich IK and other cultural practices lacked a framework in place to organize the existing knowledge in various methods. The paper refers to existing methodology E-learning and KM functions. This method first identifies functional similarities between SM, E-Learning, and KM systems and their interactions if they are properly integrated. The proposed framework consists of two functional parts; KM and SM. The KM part involves knowledge capturing, validation, formatting, storing, and distribution. SM part of the framework involves knowledge presentation, sharing, and application. Since the Somalis are said to be an oral society, this framework helps to capture and disseminate IK residing in knowledge holders.

Radical reactions in water or aqueous media are important for organic synthesis, realizing high yielding processes under non-toxic and environmentally friendly conditions. This overview includes (i) a general introduction to organic chemistry in water and aqueous media, (ii) synthetic approaches in-, on- and with-water as well as in heterogeneous phase, (iii) reaction of carbon-centered radicals with water (or deuterium oxide) activated through coordination with various Lewis acids, (iv) photocatalysis in water and aqueous media, and (v) synthetic applications bioinspired from naturally occurring processes. A wide range of chemical processes and synthetic strategies under different experimental conditions have been reviewed that lead to important functional group translocation and transformation reactions, leading to the preparation of complex molecules. These results reveal how water as a solvent/medium/reagent in radical chemistry has matured over the last two decades and how further discoveries are foreseen to come in the near future.

Media is obtaining a leading role in contemporary strategic communication, the development especially visible in the context of social-political and geopolitical conflicts. This study introduces an interdisciplinary theory of Social Laser and applies it in the analysis of social mobilization around the current militarized situation in Eastern Europe. We analyze quantitatively the content of three Swedish newspapers and qualitatively the related Facebook discussions. As demonstrated, social lasing has been employed as an instrument in information warfare. An “information tsunami” was generated by the Swedish national mass media at the outbreak of military events in March-May 2022. It shaped social dynamics on the related social media platform. The intensity of dissident actions increased when the information pressure subsided.

The significant environmental issue of water pollution caused by emerging contaminants un-derscores the imperative for developing novel cleanup methods that are efficient, economically viable, and that are intended to operate at high capacity and under continuous flows at the in-dustrial scale. This study shows the results of the operational design to build a prototype for the retention at lab scale of pollutants residues in water by using as adsorbent material, insoluble polymers prepared by β-cyclodextrin and epichlorohydrin as a cross-linking agent. Laboratory in batch tests were run to find out the adsorbent performances against furosemide and hydro-chlorothiazide as pollutants model. The initial evaluation concerning the dosage of adsorbent, pH levels, agitation, and the concentration of pharmaceutical pollutants enabled us to identify the optimal conditions for conducting the subsequent experiments. The adsorption kinetic and the mechanisms involved were evaluated revealing that that the experimental data perfectly fit the pseudo second order model being the adsorption process mainly governed by chemisorption. According to the KF constants values of 0.044 (L/g) and 0.029 (L/g) for furosemide and hydro-chlorothiazide, respectively and determination coefficient (R2) higher than 0.9 for both com-pounds, Freundlich yielded the most favorable outcomes, suggesting that the adsorption process occurs on heterogeneous surfaces involving both chemisorption and physisorption processes. The maximum monolayer adsorption capacity (qmax) obtained by Langmuir isotherm reveal a saturation of the β-CDs-EPI polymer surface 1.45 times higher for furosemide (qmax = 1.282 mg/g) than hydrochlorothiazide (qmax = 0.844 mg/g). Based on these results, the sizing design and building of a lab scale model were conducted, which in turn will be used later to evaluate its performances working in continuous flow in a real scenario.

Polyelectrolyte multilayers (PEMs) deposited on porous composite polylactic acid/poly(ε-caprolactone) substrates were studied. The substrates were previously charged in a corona discharge. Time dependences of the normalized surface potential for positively and negatively charged electrets were investigated. The morphology of the obtained porous substrates was examined by means of scanning electron microscopy (SEM). The chitosan and the casein polyelectrolytes were deposited on the substrates using the layer-by-layer (LbL) technique. A drug loading efficiency and the release kinetics were determined spectrophotometrically.

This cross-sectional study investigates the impact of Virtual Private Networks (VPNs) on Nigerians during the 2021 Twitter ban, prompted by the Nigerian government's suspension of Twitter operations following the deletion of a tweet by the President. The study aims to analyze the frequency and awareness of VPN and Twitter usage among Nigerians during the ban, addressing specific objectives. Employing a survey research method, data was collected from 400 respondents through online and offline questionnaires. Descriptive statistical tools were used for data analysis, revealing significant findings. Results indicate a substantial decrease in Twitter usage during the ban, with IPVanish emerging as the preferred VPN brand. The study also highlights an increase in VPN awareness post-ban, emphasizing the need for educational initiatives. The demographic analysis reveals a dominant age group of 21 to 25 among social media users. Overall, the research underscores the complex interplay between social media dynamics, VPN adoption, and demographic factors, emphasizing the importance of nuanced regulatory approaches and ongoing user education in Nigeria's online landscape.

The use of social media is increasing worldwide, and thus, some new problems that negatively affect life are coming to the fore. The “White Bear Thought Suppression” problem, which was put forward in previous years, has re-emerged in the digital environment as psychological disorders accompanying excessive social media use. The reason for this study was that people constantly think about what is happening on social media, cannot distinguish between digital and reality, and cannot manage their mental process. The aim of this study is to examine the relationship between social media addiction and White Bear Thought Suppression and the factors affecting it from the perspective of White Bear Suppression on social media. The sample of the research consists of 356 volunteer participants in Turkey between the ages of 18-71. The research was conducted by analyzing the data collected with the Social Media Addiction Scale (SMAS) and White Bear Suppression Inventory (WBSI) scales in accordance with the quantitative method. Some of the results obtained in the research are as follows: (a) Women’s social media addiction and White Bear Suppression were found to be high, (b) Generation Z is the generation in which social media addiction and White Bear Suppression are seen at the highest level, (c) As daily social media use increases, the level of social media addiction and White Bear Suppression increases; (d) The frequency of opening live chats and having more than one profile increases social media addiction and White Bear Suppression. (e) The frequency of sleep disorders and perceived loneliness affect both phenomena. At the end of the research, it was emphasized that social media impacted White Bear Suppression and that new clinical studies were needed, especially with young people.

The objective of the present report is the dissemination of information acquired during the application of ISO 6579-1:2017 for the isolation of Salmonella spp. from swine samples. ISO 6579-1:2017 is the officially recommended by the EU protocol for the isolation of Salmonella spp., aiming in the harmonization of effective successful control of Salmonella infection in food producing animals. Successful control of animal salmonellosis is highly dependent on the sensitivity of the biochemical methods reliably detecting the presence of the pathogen in various stages of food production. Application of ISO 6579-1:2017 resulted in the isolation of twelve Salmonella spp. and eighteen other members of the family of Enterobacteriaceae biochemically and antigenically resembling salmonellae. The findings necessitated in the depth evaluation of the culture media xylose-lysine-desoxycholate agar (XLD), Salmonella-Shigella Agar (SS), Brilliant Green Agar (BGA), Salmonella Chromogenic Agar (SCA), Triple Sugar Iron (TSI) and modified semi-solid Rappaport–Vassiliadis (MSRV) agar. The evaluation showed that these culture selective media differed significantly in their performance regarding the isolation of Salmonella from swine samples. It was concluded that the presence of atypical Salmonella strains negatively affects the prevalence of Salmonella, thus the identification of carrier pigs, eventually affecting the efficiency of control programs. Thus, doubtful results require additional biochemical testing for confirming the accuracy of such universally recommended isolation methods.

The Nigerian media have traversed through all manners of leadership— military, democratic—finally settling into democratic governance. Experience from previous regimes exposed them to the vagaries of power and how to cope with them. The coming of the internet with its social media handles threw the journalists of these media into confusion as the citizens have taken the reigns of news/information peddling from under them, turning them into agents of confirmation and authenticity of information. The objective is to interrogate how online media/information/news streaming has taken the audience away from the traditional media by being on the ‘spot’ at all hours with their avalanche of “Breaking News.” Deploying survey method (opinion poll, OPL), and relying on purposive sampling technique, the authors purposively selected WhatsApp Group Platforms (WGP), as the most suitable of the new/social media with access to all manners of news sources. Findings reveal that audiences currently resort to the traditional media to confirm the authenticity of news and information carried online in a sort-of-when-in-doubt-watch-the television; listen to radio or read the newspaper/magazine. It concludes that online news streaming has become the coveted bride of present day information and news seekers albeit a most unreliable one at that.

As the lifespan of porous asphalt pavement extends, it invariably experiences performance degradation and an increase in tire/pavement noise compared with the original surface when it is newly built. To understand the medium-term performance of porous asphalt pavement during service and reveal the influence of different pavement performance indicators on tire/pavement noise generation, a seven-year continuous observation and data analysis study was conducted. Porous asphalt with different designed material parameters was taken into account, including thin-layer porous asphalt overlay with a maximum nominal aggregate size of 10mm (PUC-10), porous asphalt with a maximum nominal aggregate size of 13mm (PAC-13), and a two-layer porous asphalt incorporating both PUC-10 and PAC-13 (PUC-10+PAC-13). Using automated pavement technology testing equipment, key performance indexes, including damage rate (DR), rut depth (RD), international roughness index (IRI), and sideway force coefficient (SFC), were measured and calculated. The on-board sound intensity (OBSI) method was used to test noise levels in three types of porous asphalt pavement structures and on a dense graded easy compact asphalt concrete (ECA) for comparison. The progressions of the medium-term performances were analyzed according to the measured results. The correlations between tire/pavement noise levels and testing speed, testing lane, pavement structure, and road condition indicators were investigated by regression. The research results revealed that the DR and SFC of the three types of porous asphalt pavement displayed more significant attenuation in the service period, while the IRI and RD showed small changes. Among them, the SFC demonstrated significant attenuation over the first 4 years, decreasing between 13.8% and 17.0%. From the 3-7 years of operation, the transverse crack disease in porous asphalt pavement progressed rapidly. The three porous asphalt pavement structures tested exhibited commendable noise reduction capabilities. Compared to ECA, the OBSI noise levels of these structures were lower by 2.09 dB, 1.53 dB, and 2.88 dB, respectively. Compared to other pavement condition indicators, RD had a more significant impact on the OBSI value of the PUC-10 porous asphalt pavement. For the PUC-10+PAC-13 porous asphalt pavement, there was a significant linear relationship between the OBSI value and SFC, mainly due to polishing of the coarse aggregate surface. It leads to a decrease of the micro-texture, which lies in increasing tire/pavement noise at high-frequency ranges and decreasing SFC. This study will have guiding significance for the research of the attenuated law and durability improvement of porous asphalt tire/pavement noise.

Polymer-based (nano)composite foams, especially those having a microcellular structure, containing suitable conductive (nano)fillers, have been shown to act as good shielding materials, hence coming as promising to act as shields in electronic devices, limiting/avoiding electromagnetic interference (EMI) pollution. Nevertheless, due to their high (micro)structural complexity, related to their multiphase nature, there is still a lot of unawareness behind the shielding mechanisms acting in these materials, coming as a necessity to study their microstructure-cellular/porous structure-properties relations, especially in terms of their electrical conductivity and EMI shielding efficiency (EMI SE). To target and control the electrical conductivity through a controlled distribution/dispersion of conductive nanofillers, single or combined (nanohybrids), as there is a direct relation between electrical conductivity and EMI SE, as well as the main EMI shielding mechanisms working on the developed microcellular structure of the foams, which are expected to be absorption-dominated or absorption/multiple reflection-based, are two of the main objectives when combining polymer foaming with the addition of conductive nanofillers. The present review work considers the recent developments and trends on polymer-based foams containing conductive nanofillers, especially carbon-based such as carbon nanotubes or graphene-based materials, as well as similar porous structures created using trending technologies such as 3D printing, for EMI shielding applications. It is divided in different sections, starting with the strategy of microcellular foaming to develop polymer-based foams with enhanced EMI shielding characteristics, especially focusing on technologies and methods using supercritical CO2 (sCO2); continuing with the use of polymer foams as templates to synthesize carbon foams with improved EMI shielding performance for high use temperature applications; the recent strategy of combining different functional (nano)fillers to create hybrid nanofillers/nanohybrids to be used at lower amounts as conductive fillers in polymer foams; the control and selective distribution of the nanofillers in terms of favoring the formation of a more effective conductive network and hence promote the enhancement of the EMI SE; the very recent use of computational approaches to tailor the EMI shielding properties of composite foams; and the very trending possibility of creating cellular components with varied porous structures from these materials using 3D printing; to finish, some future perspectives are discussed.

On February 28, 2023, the Facebook page of the United Nations Children's Fund (UNICEF) South Africa, announced the beginning of the HPV vaccination campaign for 2023. The aim of this study was to examine the attitudes of Facebook users, who commented on the UNICEF South Africa post, towards HPV vaccination to inform the development and implementation of interventions that can increase HPV vaccine acceptance and uptake. Several comments were questions regarding the eligible criteria for vaccination, side effects, consent form, and vaccination strategies. Many Facebook users were hesitant towards HPV vaccination due to various reasons including concerns around side effects, religious beliefs, vaccine stock outs, and their distrust in the institutions or systems involved in vaccination programmes. Few users accepted HPV vaccination because they believed that it was very important thing to do, beneficial for the children’s health, and they have vaccinated they children before. Our findings of the current study contribute to the promotion of acceptance and uptake of HPV vaccination by developing and implementing interventions tailored to address identified barriers that are associated with hesitant to HPV vaccination.

: Oscillation synchronization through diffusion-based communication of active materials can lead to emergence of diverse patterns and collective behaviors. A detailed general description of the formation process of synchronization or resynchronization dynamics is a challenging task. We employ a photosensitive Belousov-Zhabotinsky reaction-diffusion model (within a gel media) to investigate the recovery process of oscillation synchronization between a pair of gel patches. The recovery time for oscillation resynchronization can be modulated by patch-distance, species of signaling molecules, intensity and duration of illumination. Analysis reveals that the “switch effect” of the gel-distance and the “promotion effect” from illumination on the oscillation resynchronization originate from the competition between processes of photo-promotion of oscillation, diffusion of signaling molecules (HBrO2 and Br-) and disproportionation of HBrO2. These results will benefit studies on bio-inspired active materials and soft motors.

In today's digital landscape, the use of smartphones is almost inevitable, and so is the pervasive use of social media (SM), a constantly evolving system that has become an integral part of the daily lives of adolescents. Over the past seven years, the usage of social media platforms such as Instagram, Twitter, and TikTok has seen exponential growth among younger audiences. Excess SM use has raised concerns. This paper examines the possible negative consequences of the escalating trend in social media usage, and the implications of social media addiction (SMA), especially platforms featuring short-form video content, among teenagers. The paper also addresses the debate surrounding the validity of the term "addiction" concerning social media overuse and highlights the neurobiological processes associated with addiction, including the activation of dopamine-related brain structures. Furthermore, it discusses the researched structural and functional changes to the adolescent brain, including drawing parallels with substance addictions based on neuroimaging studies. Finally, this review advocates for exploring avenues of regulation to ensure a safer digital future, emphasizing the importance of policy to mitigate unforeseen long-term consequences of SMA and provides recommendations for reasonable and efficient future policy directions, guided by scientific and health concerns rather than political motives.

This study explores the dynamics of liquid holdup in a lab-scale co-current two-phase upflow moving packed bed reactor, specifically examining how superficial gas velocity influences the line average external liquid holdup at a fixed superficial liquid velocity. Utilizing Gamma-ray Densitometry (GRD) for precise measurements, this research extends to determining line average internal porosity within catalyst particles and the overall external bed porosity. Conducted with an air-water system within a bed packed with 3 mm extrudate porous particles, the study presents a novel methodology to calculate liquid holdup, grounded in Beer–Lambert's law. Findings reveal a decrease in liquid holdup corresponding with increased superficial gas velocity across axial and radial locations, with a notable transition from bubbly to pulse flow regime at a critical velocity of 3.8 cm/sec. Additionally, the lower sections of the packed bed exhibited higher external liquid holdup compared to the middle sections at varied gas velocities. The liquid holdup distribution appeared uniform at lower flow rates, whereas higher flow rates favored the middle sections.

This study examined the effect of the media usage environment, particularly TV and SNS devices, on advertisement acceptance, lifestyle, and psychological satisfaction. Hypothesis pathways and comparative structural mediating effects were analyzed. Media and Consumer Research public data were used for empirical analysis. A total of 6,640 people who participated in sports activities were included in the study. The results demonstrated that TV and SNS device usage environments had similar effects on advertisement acceptance. While TV did not influence the pursuit of personal life, SNS device use environments affected the pursuit of personal life. SNS device use environments had a greater effect on individual psychological satisfaction than TV. Adoption had a mediating effect on the influence of media usage environments on the pursuit of personal life. The pursuit of a personal life had a significant mediating effect on the influence of media use environments on psychological stability. This study revealed no differences in the effects of new and traditional media on advertisement acceptance, while new media had a greater influence on lifestyle and psychological satisfaction.

Abandoned, lost, or otherwise discarded fishing gear (ALDFG) is a primary contributor to the entanglement of numerous marine species. Utilizing digital media platforms like Google, Facebook, and Instagram we conducted an assessment of the detrimental effects of ALDFG and plastic litter, on the biodiversity of Italy's marine ecosystem. Our investigation revealed that plastic litter has adverse consequences on various forms of marine life, including reptiles, mammals, birds, fish, crustaceans, and mollusks, along different Italian geographical sub-areas. Several records of interaction between plastic and endangered and vulnerable marine species have been described. Our reports even highlight the impact on marine turtles, mainly on Caretta caretta. This is the first report of entangled with fishing nets in Cetorhinus maximus, Oblada melanura, Serranus scriba, Homarus gammarus, Octopus vulgaris, and Phoenicopterus roseus. Furthermore, we identified that ghost nets have repercussions for endangered and vulnerable marine species. This update sheds light on the ongoing adverse effects of ghost nets on the Italian marine ecosystem, yet it is crucial to acknowledge that the true extent of the problem remains underestimated.

Hexabromocyclododecane (HBCD) was most important flame retardant in Expanded Polystyrene foam and Extruded Polystyrene foam in the past forty years in the world. China was the major producer and user of HBCD, and the total HBCD production was about 0.3 million tons. Although HBCD has been completely banned in China in 2021 because of its long-range transport, bioaccumulation and toxicity, there's still a lot of residues in environment. Therefore, we reviewed multiple studies concerning the distribution of HBCD in diverse environmental matrices, such as air, dust, soil, water, sediment and biota. Results revealed that HBCD levels in different environments in China present a geographical variation and were at high level compared with other countries. In all environmental media, relatively high HBCD concentrations have been found in industrial and urban areas. Industrialization and urbanization are two important factors that influence the concentration and distribution of HBCD in the environment. In terms of isomer, γ-HBCD was the dominant isomer in soil, water, and sediment, while in the biota, α-HBCD was the predominant isomer.

Porous structures and micropatterning surfaces play a crucial role in the development of highly sensitive force sensors. However, achieving these two conductive architectures typically requires complex materials synthesis and expensive manufacturing processes. In this study, we introduce a novel conductive composite film featuring a porous/micropyramid hybrid conductive architecture, which is achieved through a straightforward process of materials mixing and one-step screen printing. By utilizing a deep eutectic solvent in the ink component, micropores are induced in the printed composite, while the mesh of the screen mask acts as a template, resulting in a micropyramid film surface. We have successfully realized highly sensitive flexible force sensors with multifunctional capabilities for perceiving normal force and shear force.

The rapid expansion of social media and instant messaging applications, such as WhatsApp, has transformed how individuals and organizations communicate and engage. This think piece explores the potential of integrating WhatsApp as a customer relationship management (w-CRM) tool within the education sector to foster and sustain long-term relationships among students, teaching staff, and non-teaching staff. By leveraging real-time features and the widespread use of WhatsApp, educational institutions can create a more interactive and dynamic learning environment, benefiting all stakeholders involved. The literature highlights the importance of establishing clear frameworks for mutual engagement and interaction and the potential of w-CRM to improve communication between students' families and educational institutions. There are potential risks associated with the pervasive use of WhatsApp, and call for future research to explore strategies for mitigating these risks while maximizing the benefits of w-CRM in the education sector. Longitudinal studies are recommended to evaluate the long-term impact of w-CRM on stakeholder relationships, student outcomes, and overall institutional performance.

This paper exposes the initial part of a research consisting in a need analysis carried out by the Romanian partner in the Erasmus+ "Media Education for Aware Adults" project, regarding digital competences and media education of adult educators or trainers. After a short introduction on the subject, in the paper are presented the main findings of the desk research, and two focus group sessions, first one for identifying the necessary digital competences of adult educators, and second one for identifying the elements that educators need in order to adequately support adults in their learning process, especially in relation to the digital environment. The results of the initial research will lead to the development of the main intellectual outputs, namely the digital competences framework, handbook, online platform and training material on digital and media education. In their development will be taken into account, on the one hand, the needs identified in the initial research, and, on the other hand, the need for a sustainable approach to all activities, resources and outputs produced, as well as education itself, this goal being assumed through the project.

This paper examines the learning experience of an inter-faculty higher education course conducted in an expanded remote format, using digital space as facilitator. The study focuses on the implementation of personalized education, a pedagogical approach that emphasizes the diversification of resources, strategies, and actions to empower learners in assigning personal value and meaning to their learning journey. By presenting an action research project, this study highlights the pivotal role of personalized education in guiding the course design. To foster an engaging learning environment, the course incorporated open activities and leveraged tools and platforms of the social web. Through these means, the participants, forming a community of practice, were able to collaboratively generate knowledge before, during, and after synchronous sessions. Furthermore, the participants effectively disseminated this knowledge through networks and engaged in discussions with external stakeholders. The study underscores how personalized education facilitates situated and meaningful learning by fostering expanded, flexible, and distributed experiences. These experiences revolve around a transmedia narrative that seamlessly integrates digital culture into learning opportunities and processes, effectively naturalizing its presence. The results highlight the value of personalized education approaches in adapting to the complexities of the digital age and establishing meaningful learning experiences for students.

Chatbots are increasingly used as tools for disseminating knowledge and information across various sectors of business, without the need for human intervention. With the continuous advancement of technology and the internet, the field of cybersecurity is also expanding, leading to the development of newer and more sophisticated systems to counter emerging threats. However, a fundamental question arises: how can one determine what to look for, where to acquire the necessary knowledge, and how to initiate this process? Recognizing the need for more effective tools in the market to educate individuals about online threats and self-protection, this paper aims to bridge the gap in the existing literature. The Artificial Intelligence-based Cybersecurity Chatbot (AICyberSec) has been developed to provide a versatile cybersecurity knowledge resource. This initiative is in response to the absence of a comprehensive solution in the market that effectively informs individuals about online threats and offers guidance on how to safeguard themselves. Furthermore, this chatbot serves as a valuable application for identifying potential hazards in cyberspace and can also function as an educational tool to facilitate the learning process.

Background: The aim of this study was to analyze the relationship between breastfeeding duration and adenoid size, snoring and acute otitis media (AOM). Methods: We analyzed the medical history, reported symptoms, ear, nose and throat (ENT) examination, and flexible nasopharyngoscopy examination of 145 children aged 3-5 years. Results: Breastfeeding duration of 3 and 6 months or more had a significant effect on the reduction of snoring (p = 0.021; p = 0.039). However, it had no effect on the adenoid size, mucus coverage and sleeping with an open mouth. Snoring was correlated with open mouth sleeping (p < 0.001), adenoid size with a 75% A/C ratio or more (p < 0.001), and adenoid mucus coverage in the Mucus of Adenoid Scale by Nasopharyngoscopy Assessment - MASNA scale (p = 0.009). Children who were breastfed for less than 3 months had more than a 4-fold greater risk of snoring. There was a statistically significant correlation between AOM and gender (p = 0.033), breastfeeding duration in groups fed 1, 3 or 6 months or more (p = 0.018; p = 0.004; p = 0.004) and those fed with mother’s breast milk 3 or 6 months or more (p = 0.009; p = 0.010). Moreover, a correlation was found between adenoid size and mucus coverage, tympanogram, and open-mouth sleeping (p < 0.001). Independent factors of snoring in 3- to 5-year-old children were breastfeeding duration of less than 3 months (p = 0.032), adenoid size with an A/C ratio of 75% or more (p = 0.023) and open mouth sleeping (p = 0.001). Conclusion: Children breastfed for 3 and 6 months or more exhibited reduced rates of snoring. There was no effect of breastfeeding duration on adenoid size in children aged 3 to 5 years, suggesting that the link between breastfeeding duration and snoring is primarily associated with craniofacial development and muscle tone stimulation. A breastfeeding duration of 1 month or more plays a key role in reducing the rate of AOM. The mother’s milk plays a protective role against AOM. The presence of mucus might be responsible for snoring in preschool children. A medical history of breastfeeding should be taken into consideration when snoring children are suspected of adenoid hypertrophy.

The paper presents the main experimental capabilities of the automatic system for the study of the interaction between porous media and atmosphere. This system is one of the possible variants of patent 2-241-477. The paper shows the result of a drying and wetting study of a tailings sample. The sample is 32 cm in height and 29 cm in diameter. The saturation and drying process was carried out at 26 degrees Celsius at the sample surface, an air velocity of 2 m/s and a relative humidity of 60%. The recharge applied to the column surface was 0.3 cm3/cm2/minute. The results show the effectiveness of the system in controlling the spatial-temporal variation of different physical properties of the porous medium in the vertical and surface profile. The controlled variables include volumetric water content, suction, relative humidity, sample weight variation due to recharge or drying, shrinkage, temperature, etc. The experiment shows how the tailings saturate very quickly but dry very slowly. Tailings consolidation occurs in the drying and wetting processes, being higher in the first one.

Tamm Plasmon Polariton (TPP) is a nanophotonic phenomenon that has attracted much attention due to its spatial strong field confinement, ease of mode excitation and polarization independence. TPP has applications in sensing, storage, lasing, perfect absorber, solar cell, nonlinear optics, and many others. In this work, we demonstrate a biosensing platform based on TPP resonant mode. Both theoretical analyses based on Transfer Matrix Method and experimental validation through nonspecific detection of liquids of different refractive indices and specific detection of SARS-CoV-2 nucleocapsid protein (N-protein) are presented. Results show that TPP biosensor has high sensitivity and good specificity. For N-protein detection, the sensitivity is 1.5 nm/(µg/ml) and the limit of detection can reach down to below 7 ng/ml with spectrometer of 0.01 nm resolution of wavelength shift. This work paves the way for design, optimization, fabrication, characterization, and performance analysis of TPP based biosensors

This study investigates the complex interplay between public sentiment, as captured through news titles and descriptions, and the stock prices of three major tech companies: Microsoft (MSFT), Tesla (TSLA), and Apple (AAPL). Leveraging advanced analytical methods including Pearson correlation, wavelet coherence, and regression analysis, this research probes the degree to which stock price fluctuations can be attributed to the polarity of media sentiment. The methodology combines statistical techniques to assess sentiment's predictive power on stock opening and closing prices, while wavelet coherence analysis unveils the temporal dynamics of these relationships. Results demonstrate a significant correlation between sentiment polarity and stock prices, with description polarity affecting Microsoft's opening prices, title polarity influencing Tesla's opening prices, and a positive impact of title polarity on Apple's closing prices. However, Tesla's stock showed no significant coherence, indicating a potential divergence in how sentiment affects stock behavior across companies. The study highlights the importance of sentiment analysis in forecasting stock market trends, revealing not only direct correlations but also lagged influences on stock prices. Despite its focus on large-cap tech firms, this research provides a foundational understanding of sentiment's financial implications, suggesting further investigation into smaller firms and other market sectors.

This study employs the phase-field regularized cohesion model (PF-CZM) to simulate crack propagation and damage behavior in porous granite. We investigate how pore radius (r), initial crack-pore distance (D), and pore-crack angle (θ) impact crack propagation. The simulation findings reveal that, with a fixed deflection angle and initial crack-pore distance, larger pores are more likely to induce crack extension under identical loading conditions. Moreover, with r and θ keeping constant, the crack extension can be divided into two stages: from its initiation to the lower edge of the pore and then from the lower edge to the upper boundary of the model. By varying the values of D and r, we derive multiple combinations of different D/r ratios and pore radii. These results demonstrate that with constant r, cracks tend to deflect toward the pore closer to the initial crack. Conversely, when D is maintained constant, cracks will preferentially deflect toward pores with a larger r. In summary, the numerical simulation of rock pores and initial cracks, based on the PF-CZM, exhibits remarkable predictive capabilities and holds significant potential in advancing rock fracture analysis.

An investigation of compressible flow over two-dimensional obstacles is presented in this paper. When shock waves are formed on surfaces due to compressibility and these shocks interfere with the boundary layer, undesirable effects such as friction, separation, and flow instability occur. To weaken the shock and reduce its effects, various methods have been employed in the past, including surface suction, surface blowing, and vortex generators. Using numerical solutions, the present work attempts to reduce the negative effects of the shock generated by the obstacle by creating porosity on its surface. Numerical methods such as the finite volume method and the Navier-Stokes equations as well as the Spalart-Allmaras model are used. By creating suction and blowing and increasing the cross-sectional area of the flow, porous surfaces reduce the effects of shock. Achieving around 50% porosity on the obstacle weakened the shock and reduced the Mach number after it, according to this paper's results. Also, the area under the skin friction diagram has decreased by about 38% as a result of less interference between the shock and the boundary layer and blowing caused by the porous surface.

At the beginning of 2019, the petroleum crisis impacted many economies dependent on this industry. The Mexican government started programs to identify points and government officials involved in the gasoline stealing from PEMEX (Petróleos Mexicanos), the country’s leading government petroleum company. The programs consisted of supervising and monitoring the Mexican country network of gasoline ducts to detect points where gasoline was being stolen. Consequently, large urban regions faced a lack and shortage of gasoline. This situation generated several reactions in social media and many open data in news media. Although the government provided open data about stealing gasoline locations related to crimes, it did not analyze the collected data to identify patterns, insights, and the spatio-temporal characterization of this phenomenon. This paper presents a study to deal with the regional semantics described in the social media locations of gasoline stealing. Thus, a framework to discover the trends that emerge from social media and how it is correlated with the government’s open data is also presented—the proposed methodology used machine learning techniques based on linguistic and semantic technologies. The analysis was applied to a dataset of 24,317 geo-referenced tweets. The obtained results reflected the Mexican thinking opinion regarding discovered social topics, polarization maps, and regional insights. According to discovered trends, there were long fuel lines between 1.5 and 5 kilometers (on average) at fuel stations in different Mexican states.

In recent decades, porous scaffolds for bone tissue engineering (BTE) have gained significant attention. Considerable research efforts have been dedicated to investigating the impact of scaffold pore size on a diverse array of biological processes, including cell-scaffold interactions, substance transportation, and vascularization. However, the multi-scale hierarchical porosity, a key structural characteristic of natural bone, has rarely been replicated in BTE scaffolds due to the challenges of controlling the scaffold structure across multiple length scales. With the advancement of manufacturing technology, there has been increasing research on biomimetic multi-scale hierarchical materials, which are also gaining favor in the field of BTE. Therefore, there is an urgent need to review multi-scale hierarchical porous BTE scaffolds. This paper aims to review the role and fabrication methods of multi-scale porous BTE scaffolds at different length scales, the design and manufacturing of new BTE scaffolds for bone regeneration.

In this study, a composite film was developed for electrochemical sensing of tryptophan (Trp). Porous reduced graphene oxide (PrGO) was utilized as the electron transfer layer, and a C-undecylcalix[4] resorcinarene Langmuir-Blodgett (CUCR-LB) film served as the molecular recognition layer. Atomic force microscopy (AFM), transmission electron microscopy (TEM), Raman spectroscopy, scanning electron microscopy (SEM), and electrochemical experiments were employed to analyze the characteristics of the CUCR-LB/PrGO composite film. The electrochemical behavior of Trp on the CUCR-LB/PrGO composite film was investigated, revealing a linear response range of Trp was 1.0×10-7 to 3.0×10-5 mol L-1 and a detection limit of 3.0×10-8 mol L-1. Furthermore, the developed electroanalytical method successfully determined Trp content in an amino acid injection samples. This study not only introduces a rapid and reliable electrochemical method for determination of Trp but also presents a new strategy for constructing high-performance electrochemical sensing platforms.

ABSTRACT: Iodixanol is an iso-osmolar nonionic dimeric hydrophilic contrast agent with a higher viscosity than the monomeric agents. It is the only Food and Drug Administration (FDA)approved isoosmolar agent in the United States, and it is the only contrast agent with an FDA-approved indication for use in cardiac computed tomographic angiography (CCTA), to assist in the diagnostic evaluation of patients with suspected coronary artery disease. In clinical studies, it has been noted to have fewer side effects and similar image quality when compared to low osmolar contrast media. This can be attributed to the pharmacological properties of iodixanol. In the field of cardiology, iodixanol among other intravenous contrast media is used for coronary computed tomography angiography and cardiac catheterization. In this article, the use, tolerability and efficacy of iodixanol in the field of cardiology are reviewed, specifically evaluating the use for CCTA and coronary angiography, including outcome studies, randomized trials and comparisons to other contrast agents.

Porous metals possess low bulk density, large specific strength, high stiffness and special thermal, electromagnetic and acoustic conductivity, so that porous metals are widely used in filtration and separation, flame retardant explosion-proof, biomedical application, etc. Compared with its corresponding dense metal, the presence of porous structures also leads to different corrosive performances of porous metal. So, some researches have utilized weight loss method, electrochemical impedance to evaluate porous metals’ corrosion behavior; however, the influence of pore structure on metal corrosion is still controversial, and present methods used for analyses of porous metals’ corrosion are statistical averages of the corrosion behavior of the entire porous material, which cannot accurately reflect the corrosion behavior inside the pore structure. Herein, we prepare porous copper samples with 0, 24, 72, 96 pores using mechanical process, and employ scanning kelvin probe combined with electrochemical polarization curve and impedance spectroscopy to test the corrosion performance of the porous copper in static and dynamic NaCl solution. The relevant results indicate that in static solution, the corrosion resistance of samples gradually increases with the rise of the number of pores. By contrast, the sample with 24 pores exhibits more susceptible to corrosion than the sample without pore.

This study examined the effect of the media usage environment, particularly TV and mobile devices, on advertisement acceptance, lifestyle, and psychological satisfaction. Hypothesis pathways and comparative structural mediating effects were analyzed. Media and Consumer Research public data were used for empirical analysis. A total of 6,640 people who participated in sports activities were included in the study. The results demonstrated that TV and mobile device usage environments had similar effects on advertisement acceptance. While TV did not influence the pursuit of personal life, mobile device use environments affected the pursuit of personal life. Mobile device use environments had a greater effect on individual psychological satisfaction than TV. Adoption had a mediating effect on the influence of media usage environments on the pursuit of personal life. The pursuit of a personal life had a significant mediating effect on the influence of media use environments on psychological stability. This study revealed no differences in the effects of new and traditional media on advertisement acceptance, while new media had a greater influence on lifestyle and psychological satisfaction.

Wide-scale commercialization of cultured meat, produced from in vitro-grown animal stem cells, is still a long way off because of technical, regulatory and, above all, social acceptability constraints. As a result, despite the advancement of knowledge, it is difficult to predict whether this innovation will be commonly accepted. The concept of media framing is key to better understanding individuals’ decision-making and mental interpretative patterns in relation to cultured meat adoption. This research therefore analyzes the role of media framing (namely the social media platform Twitter) on the components of consumer attitudes (cognitive, affective, and conative) in relation to cultured meat. A total of 23 020 publications and 38 531 comments were analyzed qualitatively (content analysis) and quantitatively (MANOVA). This study showed that media-framed posts influenced consumer attitudes more than did non-media-framed posts. Although the results indicate that the different types of media framing (ethical, intrinsic, informational, and belief) do not exert the same influence on each attitude component, they suggest that posts combining the ethical, intrinsic, and informational media frames have a greater impact on the acceptability of cultured meat and that the belief frame is equally important, particularly for the behavioral component. Relevant implications can be drawn for authorities and businesses on the use of differentiated education and marketing strategies

This article explores the significant parallels between big tobacco companies and major social networking sites regarding their influence on public health and society. While acknowledging the fundamental differences in their products and services, the paper scrutinises both industries through five primary lenses: addiction, misinformation, lack of regulation, harm to public health, and youth targeting. Both industries exhibit addictive characteristics, have faced criticism for the spread of misinformation, operate with limited regulation and transparency, and have raised concerns about targeting young demographics. Moreover, the potential harm to public health is a significant concern, with tobacco leading to well-established physical health issues. At the same time, excessive social media use has been linked to psychological harm, particularly among young users. The comparison underscores the necessity for greater regulation and oversight of social media companies, highlighting the urgent need for more comprehensive policies to mitigate potential harm and safeguard public health in the digital age.

This research examines the fire resistance of geopolymer composites (GCs), formulated using alka-li-activated metakaolin and aluminum powder. The production method involves spray-coating carbon steel plates with fresh GCs, followed by a 28-day curing period at room temperature. Sub-sequently, fire performance and aging tests are conducted to evaluate fire resistance. The study investigates GC properties, including apparent density, bending strength, compression strength, thermal conductivity, porosity, and production cost. Morphological changes before and after fire and aging tests are analyzed using scanning electron microscopy (SEM). Results demonstrate GC foams' outstanding thermal insulation, providing up to 75 minutes of fire resistance with a 6 mm coating, reducing temperatures by 300 °C compared to uncoated steel. GCs exhibit a density of 670 kg/m³, thermal conductivity of 0.166 W/m·K, 68% porosity, and cost efficiency at 250 dollars per cubic meter. This study underscores the potential of foamed geopolymer coatings for effective and economical surface protection.

The objective of the present study was to develop and optimize an efficient growth media for Lactobacillus delbrueckii ssp. bulgaricus, an essential dairy starter culture, uses plant-based nitrogen sources. The composition of the de Man, Rogosa, and Sharpe (MRS) culture medium was modified, and the nitrogen content was replaced by alternative nitrogen sources X-Seed N7 and N5 in various blends of 3% and 1.5%. Results showed that bacterial growth was higher with the N7 and N5 nitrogen source blends at 3% and 1.5%. Similarly, the optical densities of the L. bulgaricus strains were higher in the N7 and N5 blends (1.5/3%) compared to the MRS medium. Although there was no significance in bacterial counts for both the MRS and the N7 and N5 media, a significant difference between the control medium and the optimized growth media was noted. Our results thus suggest that the alternative nitrogen sources X-Seed N7 and N5 can substantially support the growth of lactic acid bacteria as shown with L. bulgaricus. Moreover, the presence of complex nitrogen sources rich in free nucleotides, amino acids, and peptides enhanced L. bulgaricus growth. Our results support the development of cost-effective and plant-based growth media for LAB cultures and potential benefits to the food and dairy industries. Additional research is warranted to improve buffering capacity for higher cell counts.

In this research, a design method for the graded triply periodic minimal surface (TPMS) structures with lightweight, high-strength, and high sound absorption properties is proposed. The graded TPMS structures are controlled by linear, quadratic, and sine functions. Uniform TPMS and graded TPMS were manufactured by laser powder bed fusion (LPBF) with AlSi7Mg powder, and an acoustic impedance tube test, compression test, and digital image correlation (DIC) test were ap-plied to obtain the sound absorption and compression properties. The sound absorption coefficient of a uniform Gyroid increases as the number of layers and surface thickness increase, and it in-creases as element size decreases. The sound absorption peak shifts to low frequencies as the number of layers increases. The sound absorption property of Type-Ⅰ graded TPMS is superior to the Type-Ⅱ, and the G-LinearⅠ has the highest sound absorption properties among the three functions. It reveals that the graded TPMS has superior sound absorption performance at low and medium frequencies. The compression and DIC results of graded TPMS also show excellent mechanical properties and energy absorption characteristics.

This paper presents the concept of a novel adaptable sensing solution currently being developed under the EU Commission founded PHOTONGATE project. This concept will allow to quantify multiple analytes of the same or different nature (chemicals, metals, bacteria, etc.) in a single test with levels of sensitivity and selectivity at/or over those offered by current solutions. PHOTONGATE relies on two core technologies: a bio-chemical technology (molecular gates) which will confer the specificity and, therefore, the capability to be adaptable to the analyte of interest, and which combined with porous substrates will increase the sensitivity, and a photonic technology based on Local Surface Plasmonic Resonance (LSPR) structures serves as transducer for light interaction. Both technologies are in the micron range, facilitating the integration of multiple sensors within a small area (mm²). The concept will be developed for its application in health diagnosis and food safety sectors. It is thought as an easy-to-use modular concept, which will consist of the sensing module, mainly of a microfluidics cartridge that will house the photonic sensor, and a platform for fluidic handling, optical interrogation, and signal processing. The platform will include a new optical concept, fully Europe Union Made, avoiding optical fibers and expensive optical components.

porous silicon-based photodetectors have attracted more researches due to their high luminous efficiency, good stability and low cost. In this paper, a PbS quantum dots/porous silicon hybrid structure has been fabricated. The PbS quantum dots (QDs) partly infiltrated into the porous silicon (PSi) layer and partly deposited on its surface, which could increase the absorption of near-infrared wavelength range and extend the light absorption in silicon for wavelengths longer than 1100 nm. After that, A metal-semiconductor-metal (MSM) device is fabricated and its response spectrum could extend to the 1200 nm at -3 V. As a silicon-based photodetector (PD), one can envision its role for operation from visible light to short-wavelength infrared range.

This paper applies conceptualization from Paulo Freire, Tracey Nicholls, and bell hooks to develop a framework to understand art- and media-based communication of knowledge. Increasing use of art and digital media in research and formal educational settings emphasize knowledge-communication intent, and the theory attempts to rationalize why individuals potentially devalue, discard, or misconstrue messaging. Drawing upon two case studies: children’s literature, and existing scholarship on true crime as a media genre, the framework proposes art and media consumption based on perceived task-applicability of art and media. Stemming from the complex nature of socially-imposed, self-determined, and art- & media-instated tasks that an individual may face throughout their lifetime, an individual may be drawn to Freirean power and privilege - even fictional depictions - as societal structures can grant power and privilege with universal task-applicability. Potential usage of this framework towards participatory, qualitative inquiries conclude the paper, in attempt to support future art and media designed with knowledge-communication intent.

Since the outbreak of COVID-19, social media platforms, such as Twitter, have experienced a tremendous increase in conversations related to Long COVID. The term “Long COVID” describes the persistence of symptoms of COVID-19 for several weeks or even months following the initial infection. Recent works in this field have focused on sentiment analysis of Tweets related to COVID-19 to unveil the multifaceted spectrum of emotions, viewpoints, and perspectives held by the Twitter community. However, most of these works did not focus on Long COVID, and the few works that focused on Long COVID have limitations. Furthermore, no prior work in this field has investigated Tweets where individuals self-reported experiencing Long COVID on Twitter. The work presented in this paper aims to address these research challenges by presenting multiple novel findings from a comprehensive analysis of a dataset comprising 1,244,051 Tweets about Long COVID, posted on Twitter between May 25, 2020, and January 31, 2023. First, the analysis shows that the average number of Tweets per month where individuals self-reported Long COVID on Twitter, has been considerably high in 2022 as compared to the average number of Tweets per month in 2021. Second, findings of sentiment analysis using VADER show that the percentage of Tweets with positive, negative, and neutral sentiment were 43.12%, 42.65%, and 14.22%, respectively. Third, the analysis of sentiments associated with these Tweets also shows that the emotion of sadness was expressed in most of these Tweets. It was followed by the emotions of fear, neutral, surprise, anger, joy, and disgust, respectively.

Urban vitality is an important reflection of a city's development potential and urban quality. This study uses exploratory spatio-temporal big data such as social media check-ins to portray the spatio-temporal evolution of urban vitality at the subdistrict scale in Changsha, a city in central China, from 2013-2021, and finds that urban vitality in Changsha exhibits central agglomeration and outward circling expansion over time; and then use Geodetector and spatial regression analyses are used to explain the interactive effects and spatio-temporal heterogeneity of the spa-tial elements of subdistrict form, subdistrict function and subdistrict economy on urban vi-tality. The results show the following: (1) The subdistrict form and subdistrict function dimen-sions have a significant effect on urban vitality, and the effect of the economic dimension of the subdistrict is not significant. (2) The interaction effect of the density of entertainment and leisure facilities and the density of business office facilities in subdistrict function is the dominant factor in the change of urban vitality. (3) Under the spatio-temporal effect, land use diversity and park facility density have the strongest positive effect on urban vitality; road density and shopping facility density have the weakest effect. The study aims to provide a reference for the optimization and allocation of spatial elements of subdistricts in sustainable urban development and urban renewal, to achieve the purpose of urban vitality creation and enhancement.

In the framework of mean field approximation, we consider a spin system consisting of two interacting sub-ensembles: spins interactions with in each sub-ensemble are ferromagnetic, while the inter-ensemble interactions are antiferromagnetic. We define the effective number of the nearest neighbors, and show that if the two sub-ensembles have the same effective number of the nearest neighbors, the classical form of critical exponents (, , , ) gives way to the non-classical form (, , , ), and the scaling function changes simultaneously. We demonstrate that this system allows for two second-order phase transitions and two first-order phase transitions. We observe that an external magnetic field does not destroy the phase transitions, but only shifts their critical points, allowing for control of the system’s parameters. We discuss the regime when the magnetization as a function of the magnetic field develops a low-magnetization plateau, and show that the height of this plateau abruptly rises to the value of one when the magnetic field reaches a critical value. Our analytical results are supported by a Monte Carlo simulation of a three-dimensional layered model.

Abstract—Annually, approximately 500,000 Merger and Ac- quisition (M&A) transactions are disclosed globally, each trans- action inciting substantial perturbations to the associated com- panies’ equity prices. The probability of an M&A transaction’s closure, as perceived by the public, inherently influences the stock price of the target company leading up to the proposed date of the deal. Given the recent advancements in the realm of Natural Language Processing (NLP), we propose an empirical investigation into the correlation between digital dialogue sur- rounding M&A transactions and consequent movements in the stock prices of involved companies. Utilizing transformer-based encoder-only architectures, we fine tune a stance detection model on an extensive dataset, amassed from digital communication platforms, featuring public discourse related to five historical M&A transactions. Ultimately, we achieved 70% accuracy on deal-completion stance detection using the Roberta-base model. We subsequently employ the aggregated the public sentiment towards the completion or termination of a proposed M&A transaction to model stock price movement. Utilizing a multitude of time-series based approaches, we achieve a mean absolute error of 2.29 USD for next-day price prediction and 3.40 USD for next-week price prediction. Ultimately, we find an existing but tenuous relationship between online discourse and the price trajectory of target companies, ultimately highlighting the complex social and economic phenomena behind M&A deals.Index Terms—Mergers and Acquisitions, Stock prediction, su- pervised learning, neural networks, Recurrent Neural Network, LSTM, stance detection, transformers

We overview recent findings achieved in the field of model-driven development of additively manufactured porous materials for development of a new generation of bioactive implants for orthopedic applications. Porous structures produced of biocompatible titanium alloys by selective laser melting can present a promising material to design scaffolds with regulated mechanical properties and with capacity to be loaded with pharmaceutical products. Adjusting pore geometry, one could control elastic modulus and strength/fatigue properties of the engineered structures to be compatible with bone tissues, thus preventing the stress shield effect when replacing a diseased bone fragment. Adsorption of medicals by internal spaces would make it possible to emit the antibiotic and anti-tumor agents into surrounding tissues. We critically analyze the recent advances in the field featuring model design approaches, virtual testing of the designed structures, capabilities of additive printing of porous structures, biomedical issues of the engineered scaffolds and so on. A special attention is paid to highlight the current troubles in the field and the ways of their solutions.

Developing low-cost and stable materials for converting solar energy into electricity is vital in meeting the world's energy demand. Metal-organic frameworks (MOFs) have gained attention for solar cells due to their natural porous architectures and tunable chemical structures. This review commences with an exploration of the synthetic methods of MOFs. Moreover, we discuss the various roles of MOFs, including photoanodes and counter electrodes in dye-sensitized solar cells and interfacial layers and charge carriers in perovskite solar cells. Ultimately, burdensome tasks and possible directions for advancing MOFs-based nanomaterials are provided for solar cells.

When a suspension passes through a high-frequency standing sound wave, the particles it contains are manipulated by acoustic forces. In a one-dimensional sound field, these forces lead to a planar arrangement of the particles and the formation of agglomerates. It is known that the combination of these forces and depth filtration can be utilized to significantly increase the filter efficiency of coarse-pored media. So far, this concept has only been used in microfluidics. In this paper, we present the results of a scaled-up filtration channel to test the viability of the industrial application of acoustically assisted filtration systems for the removal of microparticles. The influences of acoustic power input, flow rate, and the porosity of the filter media are investigated. In addition to verifying the scalability, a significant decrease in the large particle fraction in the outflow of the channel was observed when a high-power sound field is applied. Furthermore, the formed agglomerates tend to rise to the fluid surface. The floating particles mostly consist of a large particle fraction.

In the Post-Colonial period, the influence of media complexity in the transition to civilian rule and in shaping and consolidating democracy is self-evident in one hand and the post-colonial period the media have continued to watch and shout at misrule and governance in Nigeria. This paper examined how the Nigerian mass media mirrored the Nigerian political landscape using their major functions such as surveillance, correlation, cultural transmission, status conferral, enforcement of cultural norms and values, education, information and narcotizing dysfunctional role. This study was conducted as a longitudinal non-empirical study that relied on secondary data to examine how the mass media showcase political activities in Nigeria from the pre-colonial era through the independent era till date (2023). In this historical account, the researchers examined all media forms which include print, broadcast and new/social media such as Facebook, Whatsapp, Twitter, Telegram, and Instagram. The study showed that the mass media have played a critical role in shaping the political system in Nigeria. The findings which stemmed mainly from secondary data also showed that the Nigerian mass media have shown great interest in the Nigerian political system and as well exposed some unethical dealings in the political structure, raised consciousness, empowered the vulnerable, and acted as the mouthpiece of the oppressed on the one hand and on the other hand have played to the gallery. The researchers conclude that Nigerian mass media have effectively mirrored the Nigerian political system, particularly in the age of social media.

Aim: To analyse recommended interventions for the safe and responsible dissemination of suicidal behaviour in the media. An umbrella review was conducted. Background: Suicide is a serious public health problem that leads to more than 700,000 deaths per year, which translates into one death every forty seconds. The media are channels of information that reflect the real world. Because of its active role in the construction of reality, the way in which the media report and expose suicidal behaviour has the capacity to influence the population in either a preventive or harmful way. Design: An umbrella review was carried out and the report was written according to the Preferred Reporting Items for Overviews of Reviews.

Primary lymphoma of the middle ear is rare in cats, and little information has been accumulated on the treatment and course. An 11-year-old spayed female mixed-breed cat was brought to our hospital with facial nerve paralysis, which had been stable using prednisolone for 3 months. She was diagnosed with B-cell lymphoma of the right middle ear after otoscopic sampling, which showed evidence of filling of bilateral tympanic bullae on computed tomography. Hepatic metastasis was suspected and she was treated with multidrug chemotherapy, resulting in clinical remission. On day 176, magnetic resonance imaging and computed tomography was performed as a checkup, revealing tumor invasion into the nasopharyngeal region and recurrence of hepatic lesions without any brain abnormality. Nasal congestion then worsened and the patient died on day 228 after presenting with generalized seizures. Clinicians should be aware of the possibility of invasion to surrounding tissues and hepatic metastasis in cases of feline primary middle ear lymphoma.

In recent years, groups of cyber criminals/hackers have carried out cyber-attacks using various tactics with the goal of destabilizing web services in a specific context for which they are motivated. Predicting these attacks is a critical task that assists in determining what actions should be taken to mitigate the effects of such attacks and to prevent them in the future. Although there are programs to detect security concerns on the internet, there is currently no system that can anticipate or foretell whether the attacks will be successful. This research aims to develop sustain-able strategies to reduce threats, vulnerability, and data manipulation of chatbots, consequently improving cyber security. To achieve this goal, we develop a conversational chatbot, an application that uses artificial intelligence (AI) to communicate, and deploy it on social media sites (e.g., Twitter) for cyber security purposes. Chatbots have the capacity to consume large amounts of information and give an appropriate response in an efficient and timely manner, thus rendering them useful in predicting threats emanating from social media. The research utilizes sentiment analysis strategy by employing chatbots on Twitter (and analyzing Twitter data) for predicting future threats and cyber-attacks. The strategy is based on a daily collection of tweets from two types of users: those who use the platform to voice their opinions on important and relevant subjects, and those who use it to share information on cyber security attacks. The research pro-vides tools and strategies for developing chatbots that can be used for assessing cyber threats on social media through sentiment analysis leading to a global sustainable development of businesses. Future research may utilize and improvise on the tools and strategies suggested in our research to strengthen the knowledge domain of chatbots, cyber security, and social media.

Antimicrobial peptides provide a powerful toolkit for combating multidrug resistance. Combatting eukaryotic pathogens is complicated by the fact, the intracellular drug targets in the eukaryotic pathogen are frequently homologs of cellular structures of vital importance in the host organism. The entomopathogenic bacteria, (symbionts of entomopathogenic nematode species), release a series of non-ribosomal templated antimicrobial peptides, some may be potential drug candidates. The ability of an entomopathogenic nematode /entomopathogenic bacterium symbiotic complex to survive in a given polyxenic milieu is a coevolutionary product, explaining that those gene complexes which are responsible for the biosynthesis of different non-ribosomal templated antimicrobial protective peptides (including those which are potently capable to inactivate the protist mammalian -pathogen Leishmania and the gallinaceous bird pathogen Histomonas) are co-regulated. Our approach is based on comparative antimicrobial bioassays of the culture media of the wild-type and regulatory mutant strains. We concluded that Xenorhabdus budapestensis and X. szentirmaii are excellent sources of non-ribosomal templated antimicrobial peptides, that are efficient antagonists of the mentioned pathogens. Data on selective cytotoxicity of different cell-free culture media encourages us to forecast that the recently discovered “easy-PACId” research strategy is suitable for constructing EPB strains producing and releasing single, harmless, non-ribosomal templated antimicrobial peptides with considerable drug, (probiotic) -candidate potential.

: Two-dimensional instability of a horizontal layer of boiling liquid with a finite height is experimentally studied. In this layer, “vapor columns” rose at the corners of a square rectangular grid. The symmetry of “vapor column” location on the heating surface is considered. The model considers the approach to the boiling crisis in terms of both developed nucleate boiling and transitional boiling (the Zuber problem). When dealing with developed nucleate boiling, the layer of boiling liquid is considered in calculations as an isotropic homogeneous system (foam). It is shown how the conditions on the heating surface (capillary-porous coating) affect external hydrodynamics of the liquid layer and, ultimately, the value of the critical heat flux. The calculation ratio obtained by approaching the boiling crisis with regard to developed nucleate boiling takes into account the dependence of the critical heat flux on the void fraction of the boiling liquid layer. A new solution to the boiling crisis problem is proposed when approaching the crisis from the point of transitional boiling (the Zuber problem). This new solution eliminates some shortcomings of the classical problem (in particular, the void fraction of the layer corresponds to the experiments).

This study presents a comprehensive investigation of entropy generation during natural convection in a porous medium with Casson fluid. The governing equations, including the momentum, energy, and entropy balance equations, are solved numerically using finite element method. Through the analysis, various parameters affecting entropy generation are investigated, such as the Casson fluid parameter, Radiation, Prandtl number, and Rayleigh number. The results indicate that the Casson fluid parameter significantly influences the flow and heat transfer characteristics, while the Darcy number and Rayleigh number control the intensity of natural convection. Moreover, the Prandtl number determines the relative significance of heat transfer compared to viscous effects.