The paper proposes TOPSIS method for solving multi-objective multi-level programming problem (MO-MLPP) with fuzzy parameters via fuzzy goal programming (FGP). At first, - cut method is used to transform the fuzzily described MO-MLPP into deterministic MO-MLPP. Then, for specific , we construct the membership functions of distance functions from positive ideal solution (PIS) and negative ideal solution (NIS) of all level decision makers (DMs). Thereafter, FGP based multi-objective decision model is established for each level DM for obtaining individual optimal solution. A possible relaxation on decisions for all DMs is taken into account for satisfactory solution. Subsequently, two FGP models are developed and compromise optimal solutions are found by minimizing the sum of negative deviational variables. To recognize the better compromise optimal solution, the concept of distance functions is utilized. Finally, a novel algorithm for MO-MLPP involving fuzzy parameters is provided and an illustrative example is solved to verify the proposed procedure.

Statistical denoising techniques have been well studied, however many challenges still remain. This 9 article focuses on determining the least necessary number of significant samples in a statistical pop-10 ulation sampling, while minimizing the impact on the statistical detection of the fiber Bragg grating 11 (FBG) power spectra. This is achieved by using Bayesian decision making, small population statis-12 tics while excluding false detection. First, we investigate the impact of two-sided sliding window 13 technique applied near the cell under the test. The window size varies from 8 to 60 samples. The 14 considered maximum size of population sampling is connected with the number of wavelength 15 samples within the bandwidth of the symmetrical FBG power spectra peaks. Regarding the sym-16 metry of FBG power spectra peaks and the possible reduction of computational demands, we inves-17 tigate the impact of a one-sided sliding window. This enables to achieve less processing latency for 18 real time applications thus brings benefits to FBG-based fiber optical sensing. Both, two- and one-19 sided small population sampling techniques are then experimentally verified. Detection results are 20 analyzed in depth via calculating detection thresholds by using the small size window sliding along-21 side the waveband. From results achieved, it was found that the normality three-sigma rule does 22 not need to be followed while using the small population sampling. Experimental demonstrations 23 and analyses showed that the proposed concept of denoising and statistical threshold detection 24 based on the sliding window does not depend on the prior knowledge of probability distribution 25 functions of the FBG power spectra peaks level and background noise. We have also found that the 26 thresholds’ adaptability mainly depends on the statistical numerical characteristics of the above ad-27 ditive mixture of the FBG power spectra peaks signals and background noise.

Thirteen benzylethylenearyl ureas and one carbamate have been designed, synthesized and biologically evaluated as regards their antiproliferative activity on tumor cell lines HEK-293 and A-549 and on the immune and endothelial Jurkat T cells and HMEC-1, respectively. A relationship between the structure of the synthetic compounds and their antiproliferative activity has been established. Compounds C.1, C.3, C.12 and C.14 were chosen for further biological studies in order to determine their potential as oncoimmunomodulating agents. Some compounds exhibited significant inhibitory effects on both total PD-L1 and VEGFR-2 in HT-29 cell line, showing urea C.12 active against both targets. Some compounds could reduce more than 50% of cancer living cells, compared to non-treated ones, when assessed in co-cultures using HT-29 and THP-1 cells. In addition, these compounds showed no effect on the immune cell viability and significantly reduce CD11b expression, which is a promising target for immune modulation in anti-cancer therapies.

The first detection of gypsum (CaSO4.2H2O) by the Mars Science Laboratory (MSL) rover Curiosity in the Gale Crater, Mars created a profound impact on planetary science and exploration. The unique capability of plasma spectroscopy involving in situ elemental analysis in extraterrestrial environments, suggesting the presence of water in the red planet based on phase characterization and providing a clue to Martian paleoclimate. The key to gypsum as an ideal paleoclimate proxy lies in its textural variants, and in this study terrestrial gypsum samples from varied locations and textural types have been analyzed by Laser Induced Breakdown Spectroscopy (LIBS) technique. Petrographic, sub-microscopic and powder X-ray diffraction characterizations confirm the presence of gypsum (hydrated calcium sulphate; CaSO4.2H2O), bassanite (semi-hydrated calcium sulphate; CaSO4.1/2H2O) and anhydrite (anhydrous calcium sulphate; CaSO4) along with accessory phases (quartz and jarosite). The principal component analysis of LIBS spectra from texturally varied gypsums can be differentiated from one another because of the chemical variability in their elemental concentrations. The concentration of gypsum is determined from the partial least-square regressions model. Rapid characterization of gypsum samples with LIBS is expected to work well in extraterrestrial environments.

The problem addressed in this article consists of the motion control of a quadrotor, comprising model disturbances and uncertainties. In order to tackle model uncertainty, adaptive control based on reinforcement learning is used. The distinctive feature of this article, in comparison with other works on quadrotor control using reinforcement learning is the exploration of the underlying optimal control problem in which a quadratic cost and a linear dynamics allow an algorithm that runs in real time. Instead of identifying a plant model, adaptation is obtained by approximating the performance index given by the Q-function using directional forgetting recursive least squares that rely on a linear regressor build from quadratic functions of input/output data. The adaptive algorithm proposed is tested in simulation in a cascade control structure that drives a quadrotor. Simulations show the improvement in performance that results when the proposed algorithm is turned on.

Background: Retinal vascular abnormalities may be associated with glaucomatous damage. Adaptive optics (AO) is a new technology that enables analysis of retinal vasculature at the cellular level in vivo. The purpose of this study is to evaluate retinal arteriolar parameters using the adaptive optics fundus camera (AO -FC) rtx1 in patients with primary open-angle glaucoma (POAG) at different stages and to investigate the relationship between these parameters and changes in optical coherence tomography (OCT) and perimetry. We wanted to assess whether vascular changes could be a cause or effect of glaucomatous damage. Methods: Parameters of retinal supratemporal and infratemporal arterioles (wall thickness (WT), lumen diameter (LD), total diameter (TD), wall-to-lumen ratio (WLR), and cross-sectional area of the vascular wall (WCSA)) were analysed with the rtx1 in 111 POAG eyes, divided into three groups according to the severity of disease and 70 healthy eyes in correlation of structural defects in retinal nerve fibre layer and visual fields defects. Results: Compared with the control group, the POAG groups showed significantly smaller TD and LD values (p<0,05) and significantly higher WLR and WT values (p<0,05) for supratemporal and infratemporal arterioles. Rtx1 parameters significantly correlated with OCT parameters (retinal nerve fibre layer, ganglion cell complex and rim area) and visual field parameters (mean deviation and pattern standard deviation) (p<0.05). Conclusion:  The results suggest that vascular dysfunction may be involved in POAG pathogenesis and neurodegenerative damage, even at the very early stage of glaucoma, without visual field defects.

Ebola virus is a zoonotic virus comprised of 6 different species designated within the family Filoviridae and genus Ebolavirus. The first recorded outbreak of an Ebola virus (EBOV) was in Yambuku, Zaire (ZEBOV) in 1976, followed by Sudan Ebola virus (SUBOV) later that year. Outbreaks have been increasing throughout the 21st century, and mortality rates can reach up to 90%. Such extraordinary virulence is evidenced with few pathogens, similarly with Marburg virus (MARV) that originated in Uganda and was first detected in Germany in 1967. The virulent nature of filovirus disease has established these related viruses as a formidable global concern. There are currently four types of Ebolaviridae species known to infect humans, with two more recently identified in other animals that are genomically different with respect to cellular pathogenesis or aetiology of disease. Recent advances into understanding the pathogenesis of filovirus disease infections have been remarkable, yet the immunological response to filovirus infection remains unknown. Scientific analysis of cellular mechanisms can provide insight into virulence factors utilised by other pathogenic viruses that also cause febrile illness with occasional haemorrhagic fever in humans. In this review, we aim to provide a brief summary of EBOV proteins and the role of innate and adaptive immune cells known since 2000. We will consider the relevance and implications of immunological proteins measured by CD marker, alongside cytokine, chemokine and other biologically relevant pathways, as well as genetic research. Thorough understanding of immunological correlates affecting host responses to Ebola viruses will facilitate both clinical and applied research knowledge, contributing towards protection against potential public health threats.

The increase in life expectancy, according to the World Health Organization, is a fact, and with it rises the incidence of age-related neurodegenerative diseases. The most recurrent symptoms are those associated with tremors resulting from Parkinson's Disease (PD) or Essential Tremors (ET). The main alternatives for the treatment of these patients are medication and surgical intervention, which sometimes have restrictions and side effects. Through computer simulations in Matlab software, this work investigates the performance of adaptive algorithms based on least mean squares (LMS) to suppress tremors in upper limbs, especially in the hands. The signals resulting from pathological hand tremors, related to PD, present components at frequencies that vary between 3~Hz and 6~Hz, with the more significant energy present in the fundamental and second harmonics, while physiological hand tremors, referred to as ET, vary between 4~Hz and 12~Hz. We simulated and used these signals as reference signals in adaptive algorithms, Filtered-x Least Mean Square (Fx-LMS), Filtered-x Normalized Least Mean Square (Fx-NLMS), and a hybrid Fx-LMS\&NLMS purpose. Our results showed that the vibration control provided by the Fx-LMS\&LMS algorithm is the most suitable for physiological tremors. For pathological tremors, we have used a proposed algorithm with a filtered sinusoidal input signal, Fsinx-LMS, which presented the best results in this specific case.

The research study assessed the level of household exposure, sensitivity, and capacity to cope with flood hazards in Kasese municipality, Kasese district, Uganda. The study used an indicator-based methodology. About 210 respondents were randomly sampled for interview. Individual weights for each indicator were allocated using Principal Component Analysis. Vulnerability indices were constructed at the household level and then aggregated at the division level. A Chi Square test at a significance level of 5% was used to test for differences in the level of household vulnerability. The results revealed that Nyamwamba division was most exposed while Central was least exposed to floods. The Central division was also found most sensitive while Bulembia was least sensitive to floods. Central division had better capacity to cope with floods while Bulembia had the least capacity. Results revealed a significant difference in the level of households’ vulnerability across the divisions. However, overall, Nyamwamba was found most vulnerable and Central least vulnerable to floods. About 43.8% of the households in Kasese municipality were found highly vulnerable to floods. Therefore, urgent attention by the government through policy action measures towards climate change adaptation should be given to address the high levels of vulnerability.

Salivarian trypanosomes are extracellular parasites affecting humans, livestock and game animals. Trypanosoma brucei rhodesiense and Trypanosoma brucei gambiense are human infective sub-species of T. brucei causing Human African Trypanosomosis (HAT - sleeping sickness). The related T. b. brucei parasite lacks the resistance to survive in human serum, and only inflicts animal infections. Animal Trypanosomosis (AT) is not restricted to Africa, but is present on all continents. T. congolense and T. vivax are the most widespread pathogenic trypanosomes in sub-Sahara Africa. Trough mechanical transmission, T. vivax has however been introduced into South America. T. evansi is a unique animal trypanosome that is found in vast territories around the world and can cause atypical Human Trypanosomosis (aHT). All salivarian trypanosomes are well adapted to survival inside the host’s immune system. This is not a hostile environment for these parasite, but this is the place where they thrive. Here we provide an overview of the latest insights into the host-parasite interaction and the unique survival strategies allowing trypanosomes to outsmart the immune system. In addition, we review new developments in treatment and diagnosis as well the issues that have hampered the development of field-applicable anti-trypanosome vaccines for the implementation of sustainable disease control.

Present paper is dealing with the adaptive static balancing of robot or other mechatronic arms that are moving in vertical plane and whose static loads are variable, by using counterweights and springs. Some simple passive and approximate solutions are proposed and an example is shown. The active and exact solutions by using adaptive real time control in the case of unknown variation of static loads are simulated on VIPRO platform developed at Institute of Solid Mechanics of Romanian Academy.

Delay in data transmission is one of key performance indicators (KPIs) of a network. The planning and project value of delay in network management is of crucial importance for the optimal allocation of network resources and their performance focuses. To create optimal solutions, predictive models, which are currently most often based on machine learning (ML), are used. This paper aims to investigate the training, testing and selection of the best predictive delay model for a VoIP service in an Long Term Evolution (LTE) network using three ML techniques - Neural Networks (NN), Support Vector Machines (SVM) and k-Nearest Neighbors (k-NN). The space of model input variables is optimized by dimensionality reduction techniques: RReliefF algorithm, Backward selection via the recursive feature elimination algorithm and the Pareto 80/20 rule. A three-segment road in the geo-space between the cities of Banja Luka (BL) and Doboj (Db) in the Republic of Srpska (RS), Bosnia and Herzegovina (BiH), covered by the cellular network (LTE) of the M:tel BL operator was chosen for the case study. The results show that, in all three optimization approaches, the k-NN model is selected as the best solution. For the RReliefF optimization algorithm, the best model has 6 inputs and minimum relative error (RE), RE=0.109; for the Backward selection via the recursive feature elimination algorithm, the best model has 4 inputs and RE=0.041; and for the Pareto 80/20 rule, the best model has 11 inputs and RE= 0.049. The comparative analysis of the results concludes that according to observed criteria for the selection of the final model, the best solution is an approach to optimizing the number of predictors based on the Backward selection via the recursive feature elimination algorithm.

As a new approach, for a nonzero normed algebra $A$, we will define some different classes of algebra fuzzy norms on $A$ generated by homomorphisms and continuous homomorphisms. Also as a source of examples and counterexamples in the field of fuzzy normed algebras, separate continuity of the elements of each class are investigated.

Contract violations, uncontracted load, and the alternating nature of electricity are the key causes of the frequency irregularity and Unscheduled Interchange (UI) / Deviation Settlement pricing in a restructured organized smart grid. These variations cause the frequency to fluctuate. The topic of frequency variation is discussed in this paper under various market circumstances. To correct frequency discrepancies under various market conditions, a fleet of electrical vehicles (EV) is offered as a distributed energy storage (DES). A bidirectional charger with a PI controller is suggested for the EV bidirectional power transfer. It is suggested to use a fuzzy logic (FL) controller to modify the proportional-integral (PI) controller gains. It has been noted that utilizing such a new approach lowers the UI prices.

This paper analyzes the representation behaviors of a comparison measure between two compared fuzzy sets. Three types of restrictions on two fuzzy sets are considered in this paper: the two disjoint union fuzzy sets, the two disjoint fuzzy sets and the two general fuzzy sets. Differences exist among the numbers of possible representations of a comparison measure for the three types of fuzzy sets restrictions. The value of comparison measure is constant for the two disjoint union fuzzy sets. There are 42 candidate representations of a comparison measure for the two disjoint fuzzy sets. Of which 13 candidate representations with one or two terms can be used to easily calculate and compare a comparison measure.

In many application problems, F-transform algorithms are very efficient. In F-transform techniques, we replace the original signal or image with a finite number of weighted averages. The use of weighted average can be naturally explained, e.g., by the fact that this is what we get anyway when we measure the signal. However, most successful applications of F-transform have an additional not-so-easy-to-explain feature: the partition requirement, that the sum of all the related weighting functions is a constant. In this paper, we show that this seemingly difficult-to-explain requirement can also be naturally explained in signal-measuring terms: namely, this requirement can be derived from the natural desire to have all the signal values at different moments of time estimated with the same accuracy.

The synchronous generator, as the main component of power systems, plays a key role in these system’s stability. Therefore, utilizing the most effective control strategy for modeling and control the synchronous generator results in the best outcomes in power systems’ performances. The advantage of using a powerful controller is to have the synchronous generator modeled and controlled as well as its main task i.e. stabilizing power systems. Since the synchronous generator is known as a complicated nonlinear system, modeling and control of it is a difficult task. This paper presents a sum of squares (SOS) approach to modeling and control the synchronous generator using polynomial fuzzy systems. This method as an efficacious control strategy has numerous superiorities to the well-known T–S fuzzy controller, due to the control framework is a polynomial fuzzy model, which is more general and effectual than the well-known T–S fuzzy model. In this case, a polynomial Lyapunov function is used for analyzing the stability of the polynomial fuzzy system. Then, the number of rules in a polynomial fuzzy model is less than in a T-S fuzzy model. Besides, derived stability conditions are represented in terms of the SOS approach, which can be numerically solved via the recently developed SOSTOOLS. This approach avoids the difficulty of solving LMI (Linear Matrix Inequality). The Effectiveness of the proposed control strategy is verified by using the third-part Matlab toolbox, SOSTOOLS.

This paper presents GeoFlood, a new open-source software package for solving shallow water equations (SWE) on a quadtree hierarchy of mapped, logically Cartesian grids managed by the parallel, adaptive library ForestClaw (Calhoun and Burstedde, 2017). The GeoFlood model is validated using standard benchmark tests from Neelz and Pender (2013) and against George (2011) results obtained from the GeoClaw software (Clawpack Development Team, 2020) for the historical Malpasset dam failure problem. The benchmark test results are compared against GeoClaw and software package HEC-RAS (Hydraulic Engineering Center - River Analysis System, Army Corp of Engineers) results (Brunner, 2018). This comparison demonstrates the capability of GeoFlood to accurately and efficiently predict flood wave propagation on complex terrain. The results from comparisons with the Malpasset dam break show good agreement with the GeoClaw results and are consistent with the historical records of the event.

Descriptive statistics for parametric models are currently highly sensative to departures, gross errors, and/or random errors. Here, leveraging the structures of parametric distributions and their central moment kernel distributions, a class of estimators, consistent simultanously for both a semiparametric distribution and a distinct parametric distribution, is proposed. These efficient estimators are robust to both gross errors and departures from parametric assumptions, making them ideal for estimating the mean and central moments of common unimodal distributions. This article also illuminates the understanding of the common nature of probability distributions and the measures of them.

Babesia microti (B. microti), is a tick-transmitted protozoan parasite that infects red blood cells. It is the primary cause of human babesiosis in the US. It is also considered an emerging pathogen that continues to expand in terms of both numbers of cases and geograpical range. The severity of babesiosis can range from asymptomatic to fatal. Nevertheless, the mechanisms important for resolution of infection versus pathology remain largely unknown. In the current study we used a mouse model to evaluate factors important in protection from reinfection with B. microti following the clearance of a primary infection. Both B cell and CD4 T cell deficient mice failed to completely eliminate parasitemia 36 days post-infection following primary challenge. In the recall mouse model of infection, wild type or specific gene deleted mice were reinfected with the same strain of B. microti parasites 30-36 days after the initital primary infection, and the development of parasitemia was evaluated. Our results show that wild type mice were protected from reinfection with B. microti. In contrast, B cell and CD4 T cell deficient mice were only modestly impaired in their ability to protect against rechallenge as protection was more similar to reinfected wild type mice than naïve mice. However, one reinfected B cell deficient mice developed parasitemia levels similar to those observed in primary infection. Other factors including IFN-γ, inducible nitric oxide synthase (iNOS) and the adaptor protein MyD88 important for signling via IL-18 and IL-1 had no effect on rechallenge. Thus our study shows that infection with B. microti confers at least short term protection against rechallenge with the same parasite strain. Our data show that CD4 T cells make an important contribution to both primary and rechallenge infection with B. microti. They also suggest that antibody might play an important role in protection against reinfection or persistent infection. However, overall our results Our results suggest that no one aspect of the immune system is solely responsible for adequate protection against reinfection with B. microti.

Malaria remains a major public health problem worldwide, with eradication efforts thwarted by drug and insecticide resistance and the lack of a broadly effective malaria vaccine. In continuously exposed communities, polyclonal infections are thought to reduce the risk of severe disease and promote the establishment of asymptomatic infections. We sought to investigate the relationship between the complexity of P. falciparum infection and underlying host adaptive immune responses in an area with high prevalence of asymptomatic parasitaemia in Cameroon. A cross-sectional study of 353 individuals aged 2 to 86 years (median age = 16 years) was conducted in five villages in the Centre Region of Cameroon. Plasmodium falciparum infection was detected by multiplex nested PCR in 316 samples, of which 278 were successfully genotyped. Of these, 60.1% (167/278) were polyclonal infections, the majority (80.2%) of which were from asymptomatic carriers. Host-parasite factors associated with polyclonal infection in the study population included peripheral blood parasite density, participant age and village of residence. The number of parasite clones per infected sample increased significantly with parasite density (r = 0.3912, p<0.0001) but decreased with participant age (r = -0.4860, p<0.0001). Parasitaemia and number of clones per sample correlated negatively with total plasma levels of IgG antibodies to three highly reactive P. falciparum antigens (MSP-1p19, MSP-3 and EBA175) and two soluble antigen extracts (merozoite and mixed stage antigens). Surprisingly, we observed no association between the frequency of polyclonal infection and susceptibility to clinical disease as assessed by the recent occurrence of malarial symptoms or duration since the previous fever episode. Overall, the data indicate that in areas with high perennial transmission of P. falciparum, parasite polyclonality is dependent on underlying host adaptive immune responses, with the majority of polyclonal infections occurring in persons with low levels of protective anti-plasmodial antibodies.

Machine learning (ML) is growing in popularity for various particle accelerator applications including anomaly detection such as faulty beam position monitor or RF fault identification, for non-invasive diagnostics, and for creating surrogate models. ML methods such as neural networks (NN) are useful because they can learn input-output relationships in large complex systems based on large data sets. Once they are trained, methods such as NNs give instant predictions of complex phenomenon, which makes their use as surrogate models especially appealing for speeding up large parameter space searches which otherwise require computationally expensive simulations. However, quickly time varying systems are challenging for ML-based approaches because the actual system dynamics quickly drifts away from the description provided by any fixed data set, degrading the predictive power of any ML method, and limits their applicability for real time feedback control of quickly time-varying accelerator components and beams. In contrast to ML methods, adaptive model-independent feedback algorithms are by design robust to un-modeled changes and disturbances in dynamic systems, but are usually local in nature and susceptible to local extrema. In this work, we propose that the combination of adaptive feedback and machine learning, adaptive machine learning (AML), is a way to combine the global feature learning power of ML methods such as deep neural networks with the robustness of model-independent control. We present an overview of several ML and adaptive control methods, their strengths and limitations, and an overview of AML approaches. A simple code for the adaptive control algorithm used here can be downloaded from: https://github.com/alexscheinker/ES_adaptive_optimization

In accordance with problems such as difficulty in obtaining aerodynamic parameters of a quad-rotor model, the change of model parameters with external interference affects the control performances, an aerodynamic parameter estimation method and an adaptive attitude control method based on LADRC are designed. Firstly, the motion model, dynamics model and control distribution model of quad-rotor are established by using the aerodynamic and Newtonian Euler equations. Secondly, the identification tool CIFER is used to identify the aerodynamic parameters with large uncertainties in frequency domain and a more accurate attitude model of the quad-rotor is obtained. Then an adaptive attitude decoupling controller based on LADRC is designed to solve the problem of poor anti-interference ability of the quad-rotor, so that the control parameter b0 can be automatically adjusted to identify the change of the moment of inertia in real time. Finally, a semi-physical simulation platform is used for simulation verification. The results show that the adaptive LADRC attitude controller designed can effectively estimate and compensate the system's internal and external disturbances, and the tracking speed of the controller is faster and the precision is higher which can effectively improve system's anti-interference and robustness.

A speculative argument is presented which suggests the possible existence of a global metasystem that would be characterized as an emerging from the interaction of the units that make up the planetary system. The metasystem´s units would be the different physical, chemical and biological processes occurring in the subsystems that form the metasystem: magnetosphere, atmosphere, geosphere, hydrosphere, and biosphere. The revised global metasystem is broader than that considered in the Gaia theory or in Earth System Science, where the Earth's crust and upper atmosphere, i.e., the volume where the presence of life occurs, are considered as the limits of the system. The maintenance of the dynamic state of the global metasystem it is achieved by dissipating the free energy derived from the electromagnetic radiation of the Sun, the obtained from the Earth-Moon gravitational interaction and the energy resulting from the dynamics of the Earth core and mantle, which produces the magnetic field and much of tectonic activity. For the human species, the importance of a greater understanding of global metasystem is based on the fact that natural resources and the climate system are products of the subsystems of the global metasystem. It is possible therefore that human activities that modify the atmosphere, hydrosphere, and biosphere, change the dynamics of global metasystem.

Cloud Manufacturing (CMfg) has attracted lots of attention from scholars and practitioners. The purpose of quality of service (QoS)-aware manufacturing cloud service composition (MCSC), as one of the key issues in CMfg, is to combine different available manufacturing cloud services(MCSs) to generate an optimized MCSC that can meet diverse requirements of customers. However, many available MCS, deployed in the CMfg platform, have same function but different QoS attributes. It is a great challenge to achieve optimal MCSC with high QoS. In order to obtain better optimization results efficiently for the QoS-MCSC problems, a whale optimization algorithm(WOA) with adaptive weight, Lévy flight, and adaptive crossover strategies (ASWOA) is proposed. In the proposed ASWOA, the adaptive crossover inspired by the genetic algorithm is developed to balance the exploration and exploitation. The Lévy flight is designed to expand the search space of WOA and accelerate the convergence of WOA with adaptive crossover. The adaptive weight is developed to extend the search scale of the exploitation. Simulation and comparison experiments are conducted on different scale QoS-MCSC problems. The experimental results demonstrate that the proposed ASWOA outperforms other compared cutting-edge algorithms.

The growing importance of sustainability in organizational success, particularly in the pharma-ceutical industry, underscores the need for leveraging technologies like blockchain to enhance sustainability indicators across environmental, social, and economic pillars. This study aims to identify and understand the challenges hindering the adoption of blockchain in the pharmaceuti-cal sector for improving sustainability performance, addressing two research questions: the spe-cific challenges faced by blockchain adoption in this context and the interdependencies among these challenges. Employing a two-step approach, the study compiles challenges through a litera-ture review, refines them via expert opinions, and establishes their interrelationships using methodologies like Fuzzy Interpretive Structural Modeling (FISM) and Cross-Impact Matrix Multiplication Applied to Classification (MICMAC). The research contributes to unraveling the complex relationships and dependencies within the system, providing a structured framework for improved decision-making and strategic planning. It fills a literature gap by being the first attempt to outline driving and dependent factors related to the challenges of adopting blockchain technology for sustainability enhancement in the pharmaceutical sector, offering insights that can significantly impact brand image, company perception, and consumer value.

This paper will present the torque control design of an AFPMSM, one stator, and one rotor, using an FLC and ANFIS in-wheels fed by a three-level T-type inverter. The Surgeon ambiguous inference file of the FLC controller is built by two input vectors, the stator current error and the derivative of the stator error. These input variables include five membership functions, Negative big (NB), Negative small (NS), Equal zero (ZE), Positive small (PS), and Positive big (PB). The FLC controller is implemented with a 5x5 matrix so that the output stator voltage of the controller is required. The ANFIS controller for the neural network-based feature set and the fuzzy system. The neural network develops the dataset on the stator current error (e) and error integral (∆e). Then, the generated dataset is fed to the fuzzy logic method, and the control rules are developed. This ANFIS controller is caused by the training and testing phases. Finally, the FLC and ANFIS torque controllers are compared with the PI controller. The correctness of the proposed control structured solution is demonstrated by the simulation results of MATLAB/SIMULINK.

Coagulation is the most sensitive step in drinking water treatment. Underdosing may not yield the required water quality, whereas overdosing may result in higher costs and excess sludge. Traditionally, the coagulant dosage is set based on bath experiments performed manually. Therefore, this test does not allow real-time dosing control, and its accuracy is subject to operator experience. Alternatively, solutions based on machine-learning (ML) have been evaluated as a computer-aided alternative. Despite these advances, there is open debate on the most suitable ML method applied to the coagulation process, capable of the most highly accurate prediction. This study addresses this gap, where a comparative analysis between ML methods was performed. As a research hypothesis, a novel data-driven fuzzy inference system (FIS) should provide the best performance due to its ability to deal with uncertainties inherent to complex processes. Although ML methods have been widely investigated, only a few studies report hybrid neuro-fuzzy systems applied to coagulation. Thus, to the best of our knowledge, this is the first study thus far to address the accuracy of this novel data-driven FIS for such application. The novel FIS provided the smallest error (0.86), indicating a promising alternative tool for real-time and highly accurate coagulant dosing in drinking water treatment.

This study aims to elucidate a soft computing approach for quantitative assessment of the scoring grade or rubrics for students in an outcome based education system. The intended approach resorts to a fuzzy membership based assessment of the different parameters of the scoring system, thereby yielding a novel and humanly assessment technique. The selection of the membership functions is based on the human behavior so as to make a realistic representation of the scoring strategy. The novelty of the proposed strategy lies in assigning fuzzy membership based weighted scores instead of simply assigning score bands to rubric categories, as is performed in normal rubrics based assessment. Comparative results demonstrated on a case study of Indian education scenario reveal the effectiveness of the proposed strategy over other fuzzy membership and normal rubrics based assessment procedures.

More than 110 countries including 500 cities worldwide have set the goal of reaching carbon neutrality. Heating contributes to most of the residential energy consumption and carbon emissions. The green energy transition of fossil-based heating systems is needed to reach the emission goals. However, the heating systems vary in energy source, heating technology, equipment location, and these complexities make it challenging for households to compare heating systems and make decisions. Hence, a decision support tool that provides a generalized ranking of individual heating alternatives is proposed for households as decision-makers to identify the optimal choice. This paper presents an analysis of 13 heating alternatives and 19 quantitative criteria in technological, environmental, and financial aspects, combines ideal solution based Multi-Criteria Decision Making with 6 weighting methods and 4 normalization methods, and introduces ensemble learning with a fuzzy membership function derived from Cauchy distribution to finalize the final ranking. The robustness of the proposed method is verified by 3 sensitive analyses from different aspects. Air to water heat pump, solar heating and direct district heating are the top three rankings in the final result under Danish national average data. A framework is designed to guide the decision-makers apply this ranking guideline with their practical feasible situations.

The aim of this paper is the evaluation of the success of graduating with distinction in higher education (SGDHE) using the fuzzy DEMATEL method. The observation has been done using cause and effect criteria. 11 cause and 14 effect clusters have been used in this study. The study result of this work shows that all the effects are connected to the given causes and a cause-effect graph has been generated for each connection. This proposed approach is demonstrated with the empirical case of Dire Dawa University students in Dire Dawa Ethiopia.

Monitoring complex electro-mechanical processes is not straightforward despite the arsenal of techniques nowadays availanle. This paper presents a method based on Adaptive-Network-based Fuzzy Inference System (ANFIS) to estimate eccentricity of its spinning axis. The method is experimentally tested on an ultra-precision rotating device commonly used for micro-scale turning. The developed model has three inputs, two obtained from a frequency domain analysis of a vibration signal and the third, which is the device rotation frequency. A comparative study demonstrates that an adaptive neural-fuzzy inference system model provides better error-based performance indices for detecting imbalance than a non-linear regression model. This simple, fast, and non-intrusive imbalance detection strategy is proposed to counteract eventual deterioration in the performance of ultra-high precision rotating machines due to vibrations.

In modern mathematics, many concepts and ideas are described in terms of category theory. From this viewpoint, it is desirable to analyze what can be determined if, instead of the basic category of sets, we consider a similar category of fuzzy sets. In this paper, we describe a natural fuzzy analog of the category of sets and functions, and we show that, in this category, fuzzy relations (a natural fuzzy analogue of functions) can be determined in category terms -- of course, modulo 1-1 mapping of the corresponding universe of discourse and 1-1 re-scaling of fuzzy degrees.

In this paper, we scrutinize the axiomatic system of effect algebras which is given by D. J. Foulis and M.K. Bennett in the paper Effect Algebras and Unsharp Quantum Logics. We prove that this axiomatic system consists of independent axioms. To do this, we construct some models to indicate the indepence of each axiom. Therefore none of these axioms can be reduced when constructing any effect algebra. As a result, any algebra is an effect algebra if and only if it verifies (E1)-(E4) axioms.

The literature on substance use usually extracts conclusions from data with correlational methods. Our study shows the usefulness of complementing ordered logistic regression (OLR) and fuzzy set qualitative comparative analysis (fsQCA) to assess factors inducing cannabis consumption in a sample of 1,935 teenagers. OLR showed a significant influence of gender (odd ratio (OR) =0.383, p<0.0001), parental monitoring (OR=0.587, p=0.0201); religiousness (OR=0.476, p=0.006); parental tolerance to substance use (OR=42.01, p<0.0001) and having close peers that consume substances (OR=5.60, p<0.0001). FsQCA has allowed fitting linkages between factors from a complementary perspective. (1) Coverage (cov) and consistency (cons) attained by solutions explaining use (cons=0.808, cov=0.357) are clearly lower than by recipes of non-use (cons=0.952, cov=0.869) (2) The interaction of gender, a tolerant family to use and the attitude toward substances by peers is very consistent to explain cannabis use. (3) The most important recipe explaining resistance to cannabis is simply parental disagreement with substance consumption (cons=0.956, cov=0.861) (4) Factors as gender, religiosity, parental monitoring and age show also a relevant impact on attitude toward cannabis use. However, whereas some of them impact symmetrically on use and non-use this does not follow in factors such as parental monitoring or age.

This contribution is an attempt to reconstruct the favorable atmosphere that prevailed in Lau-sanne in 1986-87 and provided the backdrop of our invention of two-dimensional ion cyclotron resonance mass spectroscopy (2D ICR-MS). To avoid a self-centered histoire d’ancien combattant, we shall try to emphasize the context, the contributions of key players within our nascent research group at UNIL and the established group of Tino Gäumann at EPFL, the role of external speakers, and the open atmosphere that was not yet polluted by bibliometrics, obsessive concern with im-pact factors, and top-down management of research. We shall also explain why the idea of 2D ICR-MS has been ignored for many years and still has a limited impact: different scientific cul-tures in the ICR and NMR communities, different concerns with fundamental vs. applied research, different status of theory and numerical simulations, different levels of commitment of instrument manufacturers, not to mention many theoretical problems that appear to be at least as challenging in ICR as in NMR.

The hybridization of conventional thermal power plants by incorporation of renewable energy systems has witnessed widespread adoption in recent years. This trend aims not only to mitigate carbon emissions but also to enhance the overall efficiency and performance of these power generation facilities. However, calculating the performance of such intricate systems using fundamental thermodynamic equations proves to be both laborious and time-intensive. Nevertheless, possessing accurate and real-time insights into their performance is of utmost significance to ensure optimal plant operation, facilitate decision-making, and streamline power production planning. In this paper, we delve into the application of machine learning techniques, particularly hybrid methodologies, to predict the performance of power plants. Specifically, we employ three approaches: the Adaptive Neuro-Fuzzy Inference System (ANFIS), the ANFIS optimized via Particle Swarm Optimization (ANFIS-PSO), and the ANFIS optimized through Genetic Algorithm (ANFIS-GA). These techniques are alternatively applied to a complex hybrid thermal power plant, namely an Integrated Solar Combined Cycle Power Plant (ISCCPP). This ISCCPP comprises a steam turbine section, a gas turbine section, and a concentrated solar power system utilizing troughs as collectors. The energy transfer fluid, in conjunction with exhaust from the gas turbine section, heats water within a vessel or steam generator, producing steam to propel the steam turbine's rotor. Electricity generation is facilitated by both gas and steam turbines, which are coupled to a generator. The findings of this study underscore the accuracy and appropriateness of ANFIS-based models in evaluating and predicting the performance of intricate hybrid power plants. The ANFIS model exhibited an impressive overall coefficient of correlation of 0.9991. Notably, the integration of evolutionary algorithms (PSO and GA) into the ANFIS framework elevated model performance, yielding correlation coefficients of 0.9994 for ANFIS-PSO and 0.9997 for ANFIS-GA. It is noteworthy that ANFIS-GA demonstrated superior predictive capability. The modeling framework developed in this research offers valuable support to designers, energy managers, and decision-makers. It provides a robust and dependable tool to assess the performance of hybrid thermal power plants, which are poised for a global surge in numbers amid the ongoing energy transition.

The combination of artificial intelligence algorithms and numerical methods has recently become popular in the prediction of macroscopic and microscopic hydrodynamics parameters of bubble column reactors. The multi inputs and outputs machine learning can cover small phase interactions or large fluid behavior in industrial domains. This numerical combination can develop the smart multiphase bubble column reactor with the ability of low-cost computational time. It can also decrease case studies for the optimization process when big data is appropriately used during learning. There are still many model parameters that need to be optimized for a very accurate artificial algorithm, including data processing and initialization, the combination of inputs and outputs, number of inputs and model tuning parameters. For this study, we aim to train four inputs big data during learning process by an adaptive neuro-fuzzy inference system or adaptive-network-based fuzzy inference system (ANFIS) method, and we consider the superficial gas velocity as one of the input variables, while for the first time, one of the computational fluid dynamics (CFD) outputs named gas velocity is used as an output of the artificial algorithm. The results show that the increasing number of input variables improves the intelligence of the ANFIS method up to , and the number of rules during learning process has a significant effect on the accuracy of this type of modeling. The results also show that propper selection of model parameters results in more accuracy in prediction of the flow characteristics in the column structure.

The focus of recent research shifts towards complex ‘whole organism’ responses (i.e., in multiple functional traits) in adaptation to or to defend against stressors under complex environmental conditions. This increasing complexity is challenging to analyse and demands sophisticated tools to drive meaningful conclusions from those data. Trait-based regression models, multivariate analyses, like principal component analyses, and plasticity indices can be used to tackle challenges with those complex investigations. But those methods have substantial limitations, like the need for high sample size, multi-dimensionality of results or the need for trait coordination in high-dimensional space, or the calculation on the population level, which might buffer or cover the de facto occurring individual effects. To improve and simplify studies on ‘whole organism’ responses, analyses, and their interpretation, we developed the Index for Adaptive Responses. This straightforward framework can unite all traits of an organism in one number. A newly developed transformation method, included in this framework, comprises a normalisation and standardisation to a baseline or control without changing the data or variance structure of the original data. We assessed the performance and accuracy of the framework with an application in an extensive predator-prey case study, with simulations and application examples using literature data. We show that the Index for Adaptive Responses respects adaptations as well as maladaptations and outperforms established approaches. The framework is robust against outliers and non-gaussian distribution. We further show that the qualitative prediction of the adaptiveness of included traits is highly accurate, even under challenging conditions, e.g., low replicate numbers. Functions and algorithms of the framework are provided with an R package but can easily be translated into other programming languages. The Index for Adaptive Responses will simplify future research on complex adaptive responses and improves our understanding of these responses’ ecological as well as evolutionary implications.

In this paper, experimental results about the performance of a Takagi-Sugeno Fuzzy Controller (TSFC) for an EV3 Ballbot Robotic System (EV3BRS) are reported. The physical configuration for the EV3BRS has the form of an inverted pendulum mounted on a ball. The EV3BRS is an underactuated robotic system with four outputs and two control torques. The Takagi-Sugeno Fuzzy Model (TSFM) design comes from linearization of the nonlinear model around two operation points near from the upright position of the EV3BRS's body. The Parallel Distributed Compensation (PDC) approach is used to the design of the TSFC. The Linear Matrix Inequalities (LMIs) approach is used to get the feedback gains for every local linear controller guaranteeing global asymptotically stability, via a more relaxed stability condition, of the overall fuzzy control system. Measurement and control data from and to the EV3BRS are transferred via telecontrol and telemetry.

This study presents a vibration control using actively tunable vibration absorbers (ATVA) to suppress vibration of a thin plate. The ATVA’s is made of a sandwich hollow structure embedded with the electrorheological fluid (ERF). ERF is considered to be one of the most important smart fluids and it is suitable to be embedded in a smart structure due to its controllable viscosity property. ERF’s apparent viscosity can be controlled in response to the electric field and the change is reversible in 10 microseconds. Therefore, the physical properties of the ERF-embedded smart structure, such as the stiffness and damping coefficients, can be changed in response to the applied electric field. A mathematical model is difficult to be obtained to describe the exact characteristics of the ERF embedded ATVA because of the nonlinearity of ERF’s viscosity. Therefore, a fuzzy modeling and experimental validations of ERF-based ATVA from stationary random vibrations of thin plates are presented in this study. Because Type-2 fuzzy sets generalize Type-1 fuzzy sets so that more modelling uncertainties can be handled, a semi-active vibration controller is proposed based on Type-2 fuzzy sets. To investigate the different performances by using different types of fuzzy controllers, the experimental measurements employing type-1 fuzzy and interval type-2 fuzzy controllers are implemented by the Compact RIO embedded system. The fuzzy modeling framework and solution methods presented in this work can be used for design, performance analysis, and optimization of ATVA from stationary random vibration of thin plates.

This paper presents work done as part of a transformation effort towards a greener and more sustainable Aluminium manufacturing plant. The effort includes reducing the carbon footprint by minimising waste and increasing operational efficiency. The contribution of this work includes the reduction of waste through the implementation of autonomous, real-time quality measurement and classification at an Aluminium casthouse. Data is collected from the MV20/20 which uses ultrasound pulses to detect molten Aluminium inclusions, which degrade the quality of the metal and cause subsequent metal waste. The sensor measures cleanliness, inclusion counts and distributions from 20 - 160 microns. The contribution of this work is in the development of business analytics to implement condition-based monitoring through anomaly detection, and to classify inclusion types for samples that failed. For anomaly detection, multivariate K-Means and DBSCAN algorithms are compared as they have been proven to work in a wide range of datasets. For classification, a two-stage classifier is implemented. The first stage classifies the success or failure of the sample, while the second stage classifies the inclusion responsible for the failed sample. The algorithms considered include logistic regression, support vector machine, multi-layer perceptron and radial basis function network. The multi-layer perceptron offers the best performance using k-fold cross-validation, and is further tuned using grid search to explore the possibility of an even better performance. The results reveal that the model has achieved a global maximum in performance. Recommendations include the integration of additional sensor systems and the improvements in quality assurance practices.

Aim: To investigate the effects of intensive physical exercise on retinal microvascular regulation in healthy volunteers by the adaptive optics retinal camera measurement. Methods: We included healthy volunteers (11 men and 14 women) aged 20.6± 0.9. Heart rate (HR) and systolic and diastolic blood pressure (SBP, DBP) were recorded before and after a submaximal physical exertion of continuously riding a training ergometer. The superior temporal retinal artery measurements were captured using the adaptive optics (AO) camera rtx1TM (Imagine Eyes, Orsay, France) without pupil dilatation. We compared measures of vessel diameter (VD), lumen diameter (LD), two walls (Wall 1, 2), wall-to-lumen ratio (WLR), and wall cross-sectional analysis (WCSA) before and immediately after the cessation of exercise. Results: Cardiovascular parameters: After exercise, SBP, DBP and HR changed significantly from 130.2±13.2 to 159.7±15.6 mm Hg, 81.2±6.3 to 77.1±8.2 mm Hg and 80.8±16.1 to 175.0±6.2 bpm, respectively (p < 0.002). Retinal microcirculation analysis: Before the exercise, the mean LD was 96.0±6.8, VD 118.5±8.3, WLR 0.234±0.02, WCSA 3802.8±577.6. The mean LD and Wall 1 did not change significantly after exercise but slightly decreased. The VD, Wall 2, WLR and WCSA decreased significantly (p

Anatomy education plays a critical role in medical practice, and the level of anatomical knowledge among students and physicians significantly impacts patient care. This article presents a pilot project conducted by the University of Milan aimed at exploring the effectiveness of the Area9's Rhapsode platform, an intelligent tutoring system that uses artificial intelligence to personalize learning and collect data on mastery acquisition. The study focused on liver anatomy and employed a flipped classroom approach, incorporating adaptive learning modules and an interactive in-class session. The project's execution, outcomes and preliminary pedagogical considerations are discussed. The results demonstrated improved learning quality, positive repurposing of study time, enhanced metacognitive awareness among students, with most of students demonstrating conscious mastery of the materials and a clear understanding of their level of competence. This approach, by providing valuable insights into the potential of artificial intelligence-based adaptive learning systems in anatomy education, could address the challenges posed by limited teaching hours, shortage of anatomist and the need for individualized instruction, with recommendations for future research and the expansion of adaptive learning modules to other anatomical districts.

Cervical cancer remains a major public health problem. Despite the screening programs, cervical cancer is the second most commonly diagnosed cancer. Most of the cases occur in less developed countries, and it is the third leading cause of cancer death among females. In 2000–2007, the five-year relative survival rate for European women diagnosed with cervical cancer was 62%.[1] Standard treatment for locally advanced cervical cancer reveals external beam radiotherapy (EBRT) with concurrent chemotherapy followed by image-guided adaptive brachytherapy (IGABT) boost [2, 3]. In the last years, the Gynaecological (GYN) working group composed of Group Européen de Curiethérapie-European Society for Therapeutic Radiology and Oncology (GEC-ESTRO) has developed new recommendations for the treatment of cervical cancer based on IGABT. The treatment plan includes 3-dimensional (3D) imaging based on magnetic resonance imaging (MRI) or computed tomography (CT), adaptive to the target volume and organ at risk [4–6]. The brachytherapy insertion is made under anaesthesia. At the time of the application insertion, the ultrasound is used to guide the dilatation of the uterine canal and assess the depth of the uterine cavity. In this paper, we review the data available in international literature about the use of ultrasound (US) in brachytherapy treatment of cervical cancer.

In industry 4.0 era, video applications such as surveillance visual systems, video conferencing, or video broadcasting have been playing a vital role. In these applications, for manipulating and tracking objects in decoded video, the quality of decoded video should be consistent because it largely affects to the performance of the machine analysis. To cope with this problem, we propose a novel perceptual video coding (PVC) solution in which a full reference quality metric named Video Multimethod Assessment Fusion (VMAF) is employed together with a deep convolutional neural network (CNN) to obtain the consistent quality while still achieving the high compression performance. First of all, to achieve the consistent quality requirement, we propose a CNN model with an expected VMAF as input to adaptively adjust the quantization parameters (QP) for each coding block. Afterwards, to increase the compression performance, a Lagrange coefficient of Rate-Distortion optimization (RDO) mechanism is adaptively computed under Rate-QP and Quality-QP models. Experimental results show that the proposed PVC has achieved two targets simultaneously: the quality of video sequence is kept consistently with an expected quality level and the bit rate saving of the proposed method is higher than traditional video coding standards and relevant benchmark, notably with around 10% bitrate saving in average.

Studies evaluating candidate tick-derived proteins as anti-tick vaccines in natural hosts have been limited due to high costs. To overcome this problem, animal models are used in immunization tests. The aim of this article was to review the use of rabbits as an experimental model for the evaluation of tick-derived proteins as vaccines. A total of 57 tick proteins have been tested for their immunogenic potential using rabbit as model for vaccination. The most commonly used rabbit breeds were New Zealand (73.8%), Japanese white (19%), Californians (4.8%) and Flemish lop-eared rabbit (2.4%). Anti-tick vaccines efficacy resulted in up to 99.9%. Haemaphysalis longicornis (17.9%) and Ornithodoros moubata (12.8%) were the most common tick model in vaccination trials. Experiments in rabbits have revealed that some proteins (CoAQP, OeAQP, OeAQP1, Bm86, GST-Hl, 64TRP, serpins and voraxin) can induce immune responses against various tick species. In addition, in some cases it was possible to determine that the vaccine efficacy in rabbits was similar to experiments performed in natural hosts (e.g. Bm86, IrFER2, RmFER2, serpins and serine protease inhibitor). In conclusion, results have shown that prior to performing anti-tick vaccination trials using natural hosts, rabbits can be used as suitable experimental models for these studies

3D object detection is essential for an accurate and reliable autonomous driving system. Currently, the methods used by the state-of-the-art two-stage detectors are not flexible enough and their fea-ture extraction capabilities are very limited to cope effectively with the disorder and irregularity of point clouds. In this paper, we combine the advantages of both PV-RCNN and PAConv (Position Adaptive Convolution) to create a completely new network, FANet, in order to overcome the ir-regularity and disorder of point clouds. The convolution in our network builds convolutional ker-nels from a basic weight matrix, whose combined coefficients are learned adaptively by LearnNet from relative points. This network allows for flexible modeling of complex spatial variations and geometric structures in the 3D point cloud, enabling better extraction of point cloud features and producing high-quality 3D proposal boxes. Compared to other methods, FANet is superior in terms of 3D object detection accuracy. Extensive experiments on the KITTI dataset have shown a signif-icant improvement in our approach.

Fires are complex multi-physics problems that span wide spatial scale ranges. Capturing this complexity in computationally affordable numerical simulations for process studies and “outer-loop” techniques (e.g., optimization and uncertainty quantification) is a fundamental challenge in reacting flow research. Further complications arise for propagating fires where a priori knowledge of the fire spread rate and direction is typically not available. In such cases, static mesh refinement at all possible fire locations is a computationally inefficient approach to bridging the wide range of spatial scales relevant to fire behavior. In the present study, we address this challenge by incorporating adaptive mesh refinement (AMR) in fireFoam, an OpenFOAM solver for simulations of complex fire phenomena involving pyrolyzing solid surfaces. The AMR functionality in the extended solver, called fireDyMFoam, is load balanced, models gas, solid, and liquid phases, and allows us to dynamically track regions of interest, thus avoiding inefficient over-resolution of areas far from a propagating flame. We demonstrate the AMR capability and computational efficiency for fire spread on vertical panels, showing that the AMR solver reproduces results obtained using much larger statically refined meshes, but at a substantially reduced computational cost. We then leverage the computational efficiency of the AMR solver to demonstrate an optimization framework for fire suppression based on the open-source Dakota toolkit.

In this research work, an adaptive scheme for the coordinated protection of AC Microgrids using directional overcurrent (DOCR) relays is presented. Protection of AC MGs is a complex and challenging issue due to the dynamic nature of the network including, a) its capability to reconfigure the modes of operation ranging from grid-connected to the islanded mode, c) bidirectional-power flow capability, and c) integration of intermittent renewable energy resources with real-time variations in the resource availability. Consequently, the fault current contributions may largely vary depending upon the incident conditions on the network. Conventional protection schemes, generally designed for radial networks, and unidirectional power flow from the source end to the load may either mal-operate or exhibit very poor performance, if not adapted according to the dynamic conditions of the network. To address this issue, a communication-based adaptive protection scheme capable to adapt its settings according to the generation resource availability and network configuration is presented in this work. The proposed scheme consists of an intelligent central protection unit (ICPU) capable to update the settings and communicate it to the individual relays based on the pre-calculated offline settings. The directional overcurrent relays employed in the scheme use two-stage settings, i.e. definite time and inverse definite minimum time characteristics for the effective coordination among the downstream and upstream relays. An adaptive algorithm for ICPU operation is presented and a case study is implemented for a modified IEEE 9-bus system using DigSilent Power factory. The results for various scenarios including, a) grid-connected mode of operation, b) islanded mode of operation, and c) variable distributed generation mode are obtained and compared to the static scheme, which validates the effectiveness of the proposed scheme.

Weight gain affects about 10-20% of patients after bariatric surgery. It is a phenomenon that is difficult to understand and to intervene due to its complexity and etiological heterogeneity. In the present study, we investigated, from a network analysis perspective, the associations between weight regain, psychological, sociodemographic factors and physical activity in patients undergoing bariatric surgery. The sample consisted of 124 patients, of both sexes, aged 39 ± 9.1 years, who had undergone surgical intervention for more than 18 months. After voluntary consent, respondents answered questionnaires and instruments directly on the Google Forms platform. The results indicated that weight gain was negatively associated with the items of depression, anxiety and stress, binge eating and with the dimensions of the personality questionnaire (negative affectivity -0.182; detachment -0.078; antagonism -0.107; disinterest - 0.198 and psychoticism -0.158). The centrality indicators revealed that the characteristics of disinterest and negative affectivity and most of the items on the depression, anxiety and stress scale had a greater expected influence (values ​​from 1,043 to 1,502), indicating that these are the most sensitive variables to intervention and who need more attention from health professionals.

Progressive technologies and practices are shifting the possibilities of building design and improving work efficiency. Constantly changing site conditions require different procedures and designs that take into account these changing conditions, whether it is a design solution, a change in environmental conditions, or just sustainability factors. Adaptive building design offers opportunities to cope with changing factors to achieve the highest possible level of building quality. This case study deals with the topic of adaptive formwork design for building renovation, taking into account sustainability. Aim of the article is an investigation and demonstration of the building information modelling (BIM) environment used for the adaptive design of formwork elements for the building renovation in the context of sustainability. The object of the case study is a building in the center of Kosice, Slovakia. BIM environment allows prompt and correct adaptation of the formwork design to changing conditions of lighting, ventilation, heating and temperature during the design of the building.

Although Mast cells are known as key drivers of type I allergic reactions, there is increasing evidence for their critical role in host defense. MCs do not only play an important role in initiating innate immune responses, but also influence the onset, kinetic and amplitude of the adaptive arm of immunity, or fine-tune the mode of the adaptive reaction. Intriguingly, MCs have been shown to affect T cell activation by direct interaction or indirectly by modifying properties of antigen-presenting cells, and can even modulate lymph node-borne adaptive responses remotely from the periphery. In this review, we provide a summary of recent findings that explain how MCs act as a link between the innate and the adaptive immunity, all the way from sensing inflammatory insult to orchestrating the final outcome of the immune response.

Early childhood is considered to be a period of rapid development, with the acquisition of abilities predicting future positive school competences. Motor, cognitive and social difficulties related to cancer therapies heavily impact the development of children with cancer. This study focused on two main aims: to assess the developmental pathways of preschool children with acute lymphoblastic leukaemia one year post-treatment and to compare these abilities both with those of a control group of healthy peers and with Italian norms. Forty-four children and their families, recruited through the Haematology-Oncologic Clinic of the Department of Child and Woman Health (University of Padua), agreed to participate to this study. The children’s mean age was 4.52 years (SD = 0.94, range = 2.5-6 years), equally distributed by gender, all diagnosed with Acute Lymphoblastic Leukaemia. Matched healthy peers were recruited through paediatricians’ ambulatories. Each family was interviewed adopting the Vineland Adaptive Behaviour Scales. Paired sample Wilcoxon tests revealed that children were reported to have significantly more developmental difficulties than their healthy peers. When compared with Italian norms they scored particularly low in verbal competence, social and coping skills. No significant association were found between treatment variables and developmental abilities. These findings suggest that the creation of specialized interventions both for parents and children may fill the possible delays in children’s development probably due to stress, lack of adequate stimulation or difficult adaptation.

Early childhood is considered to be a period of rapid development, with the acquisition of abilities predicting future positive school competences. Motor, cognitive and social difficulties related to cancer therapies heavily impact the development of children with cancer. This study focused on two main aims: to assess the developmental pathways in preschool children with leukaemia one year post-treatment; and to compare these abilities with those of a control group of healthy peers. Forty-eight children and their families, recruited through the Haematology-Oncologic Clinic of the Department of Child and Woman Health (University of Padua), agreed to participate in this study. The children’s mean age was 4.36 years (SD = 1.07, range = 1.91–6 years), equally distributed by gender, most of whom were diagnosed with Acute Lymphoblastic Leukaemia (N = 44). Matched healthy peers were recruited through paediatricians’ ambulatories. Each family was interviewed adopting the Vineland Adaptive Behaviour Scales. Paired sample t-tests revealed that children, especially aged 42–72 months, were reported to have significantly more developmental difficulties than their healthy peers, particularly in verbal competence, social and coping skills and gross motor abilities. These findings suggest that the creation of specialized interventions for both parents and children may fill the possible delays in children’s development due to toxic therapies and their associated hospitalisation.

LncRNA are involved in multiple regulatory pathways, its versatile mode of action has disclosed a new layer in gene regulation. They are reportedly modulated during plant development, with specific tissue functions and in response to stresses. In this study, we analyzed LncRNA from leave samples collected from the legume Copaifera langsdorffii (copaiba) from two divergent ecosystems: Cerrado (CER) and Atlantic Rain Forest (ARF). We identified 8020 novel lncRNAs, from which 2893 transcripts were regulated above 2-fold and 566 above 5-folds in either condition. This putative lncRNA set was compared with seven Fabaceae genomes, of which 1747 and 1879 transcripts (from ARF and CER, respectively) aligned to at least two genomes. Further, 2194 copaiba lncRNAs were successfully mapped to at least one of six Fabaceae transcriptomes. The secondary structures of the lncRNAs that were conserved and differentially expressed between the populations were predicted using in silico methods. Our results indicate the potential involvement of lncRNAs in the adaptation of C. langsdorffii to two different biomes.

Chromatographic separation is a critical technique in the manufacturing processes of both chemical products and biopharmaceuticals. Its principle relies on exploiting the differences in distribution between the stationary and mobile phases to achieve the separation of mixtures. The precision of substance concentration during separation directly impacts the quality and usability of the final product. Therefore, the development of an effective and precise separation control technique has long been a vital concern in the field of chromatographic separation control. Currently, the employment of Simulated Moving Bed (SMB) technology for chromatographic separation, which allows for continuous feed, has been recognized as a cutting-edge technique. SMB is a continuous process technology that enhances the efficiency of adsorbents within the bed. This sequential multi-column SMB technology not only increases production capacity but also reduces the consumption of solvents and water. It is acknowledged as one of the cleanest manufacturing technologies in the biopharmaceutical industry. However, multi-column SMB involves various variables such as flow rates in multiple sections and valve switching times, rendering its system control highly complex. Unlike traditional control objectives that aim to minimize control output errors, the control objective of SMB is to achieve a specific proportion of substance concentration. Consequently, designing and implementing traditional control theories for SMB is challenging, leading to SMB systems largely being controlled based on simple PLC controls. Moreover, these controls are often applicable only to single or a few-column SMB setups, limiting the effectiveness of high-capacity applications. To achieve effective control of SMB, this study employs an adjustable intelligent fuzzy controller with a structure like an approximate neural network (NN) for SMB control research. Simulation results demonstrate that the intelligent controller effectively achieves desirable control outcomes for the SMB system.

In this paper, we introduce an innovative approach to distinguish Gliosarcoma (GSM) from Glioblastoma (GBM). Our method combines causal fuzzy logic rules with the Big Bird architecture, a Transformer-based Deep Learning algorithm. Unlike prior research, which often relied on statistical models to reduce dataset dimensions before causal analysis, our approach harnesses the complete dataset in tandem with our causal fuzzy Big Bird architecture. Additionally, we benchmark our results not only against previous Gliosarcoma/Glioblastoma studies but also against GPT-2 for a comprehensive evaluation.

For a nonzero normed linear space X‎, ‎we will define some different classes of fuzzy norms on X generated by linear and bounded linear functionals‎. ‎Also separate continuity of the elements of each class are investigated‎. ‎The aim of this research is to introduce a source of examples and counterexamples in the field of fuzzy normed spaces‎.

This paper presents a novel approach for individual design perception modeling using the YUKI-trained Fuzzy Inference System. The study focuses on understanding how individuals perceive design based on personality traits, particularly openness to experience. The proposed YUKI algorithm optimizes the FCM clustering algorithm, enhancing its ability to handle uncertain and imprecise data. The YUKI-trained FIS generates several Sugeno-type FIS models to predict design perception, to minimize the Root Mean Squared Error between the model prediction and the actual design perception of participants. The results demonstrate that the YUKI-trained FIS offers more accurate predictions compared to the traditional FCM-trained FIS, and the RMSE values for individual design perceptions fall within a satisfactory range of 0.84 to 1.32. The YUKI-trained FIS proves effective in clustering individuals based on their level of openness, providing insights into how personality traits influence design perception.

Interferon-beta is one of the most widely prescribed disease-modifying therapies for multiple sclerosis patients. However, this treatment is only partially effective, and a significant proportion of patients do not respond to this drug. This paper proposes an alternative fuzzy logic system based on the opinion of a neurology expert to classify relapsing-remitting multiple sclerosis patients: high, medium, and low responder to interferon-beta. Also, a pipeline prediction model trained with biomarkers associated to interferon-beta response is proposed for predicting whether patients are potential candidates to be treated with this drug, in order to avoid ineffective therapies. The classification results shows that the fuzzy system presents a 100% efficiency compared with an unsupervised hierarchical clustering method (52%). So, the performance of the prediction model is evaluated, and a 0.8 testing accuracy is achieved. Hence, a pipeline model including data standardization, data compression, and a learning algorithm, can be a useful tool for getting reliable predictions about the response to interferon-beta.

At present, aeroponic control is mainly regulated according to the environmental factors of aeroponics, such as the temperature, humidity, light intensity, carbon dioxide concentration, pH, and electrical conductivity (EC) of the nutrient solution. There is a lack of knowledge available in the literature for an aeroponic control system for plant growth information as the primary feedback signal. Therefore, a fuzzy logic-controlled aeroponics system was developed for the growth of lettuce as a feedback signal. After designing, the effectiveness test of system was performed with experiment having three treatments T1 (180C), T2 (220C) and without control (CK). The results show an increasing trend in shoot length, root length, and shoot area over time in all treatments. In terms of shoot area, the maximum of 345 cm² was observed in the T1 treatment, while the CK treatment had a minimum of 241.8 cm². Statistical analysis indicated that the T1 and T2 treatments were not significantly different, but both were significantly different from the CK treatment. The study demonstrates the effectiveness of the fuzzy logic control system and an 18°C nutrient solution temperature, resulting in improved lettuce growth and reduced root-to-shoot ratio. The findings suggest the potential of using fuzzy logic control in aeroponics for optimized cultivation outcomes.

Accelerators play a critical role in fostering innovative ecosystems and nurturing startups. The evaluation and selection of startups, particularly technology-based startups, for acceleration programs are essential in accelerator economy and management. Assessment of startups requires consideration of numerical and qualitative criteria such as sales, prior startup experience, demand validation, and product maturity. Startups must be ranked based on the varying importance of criteria, which can be identified as a fuzzy multi-criteria decision-making (MCDM) problem. MCDM methods have proven effective in managing complex problems. However, the use of MCDM techniques in startup selection and evaluation of criteria interrelationships from the accelerator perspective is yet to be researched. This study proposes a hybrid DEMATEL-ANP-based fuzzy PROMETHEE II model to rank startups and examine the interrelationships between factors. The final preference values are fuzzy numbers, making a fuzzy ranking method necessary for decision-making. An extension of ranking fuzzy numbers using a spread area-based relative maximizing and minimizing set is suggested to improve the flexibility of existing ranking MCDM methods. Algorithms and formulas are derived and a comparison demonstrates the merits of the proposed method. Finally, a numerical experiment is designed to address the viability of the hybrid DEMATEL-ANP-based fuzzy PROMETHEE II model.

The estimation of the efficiency of road transport vehicles remains a significant problem for contemporary transport companies, as the technological process is influenced by numerous stochastic impacts, such as demand stochasticity, road conditions uncertainty, transport market fluctuations, etc. To consider the uncertainty related to the estimation of the vehicles’ fleet efficiency, we propose a fuzzy-logic approach, where the efficiency of a given vehicle is described by a membership function. The efficiency of the whole fleet and its rational structure in that case can be evaluated as a fuzzy set. To demonstrate the developed approach, we depict a case study of using cargo vehicles for deliveries of agricultural products in the Republic of Kazakhstan. The numeric results are presented for the selected models of vehicles that a transport company uses to service a set of clients located in Northern Kazakhstan.

We demonstrate, in the context of Loop Quantum Gravity, the Quantum Holographic Principle, according to which the area of the boundary surface enclosing a region of space encodes a qubit per Planck unit. To this aim, we introduce fermion fields in the bulk, whose boundary surface is the two-dimensional sphere. The doubling of the fermionic degrees of freedom and the use of the Bogoliubov transformations lead to pairs of spin network’s edges piercing the boundary surface with double punctures, giving rise to pixels of area encoding a qubit. The proof is also valid in the case of a fuzzy sphere.

The purpose of this research article is to provide a comprehensive method that allows the evaluation of the public transportation in their different transport lines that offer in Ciudad Juárez, Chihuahua. This study presents a description of the public transport system as part of the literature review that describes an appropriate model based on the more outstanding publications about urban mobility and public transportation for passengers’ as well as success cases published which serves as a starting point to check the actual state of the public transportation system based on the Pythagorean Fuzzy CODAS to analyze and evaluate the alternatives through criteria that defines the general performance. The integration of these methods provides an adequate methodology for decision-making concerning urban planning and mobility to detect and improve the performance of criteria not considered within sustainable urban mobility plans.

model checking techniques are often used for the verification of software systems. Such techniques are accompanied with several advantages. However, state space explosion is one of the drawbacks to model checking. During recent years, several methods have been proposed based on evolutionary and meta-heuristic algorithms to solve this problem. In this paper, a hybrid approach is presented to cope with the SSE problem in model checking of systems modeled by GTS with an ample state space. Most of existence proposed methods that aim to verify systems are applied to detect deadlocks by graph transformations. The proposed approach is based on the fuzzy genetic algorithm and is designed to decline the safety property by verifying the reachability property and detecting deadlocks. In this solution, the state space of the system is searched by a fuzzy genetic algorithm to find the state in which the specified property is refuted/verified. To implement and evaluate the suggested approach, GROOVE is used as a powerful designing and model checking toolset in GTS. The experimental results indicate that the presented hybrid fuzzy method improves speed and performance by comparing other techniques

The most important issue in integrated next generation wireless systems (NGWS) by fourth generation networks which consists of various wireless architectures extending from cellular networks to satellite networks is to allow everyone around the world to connect seamlessly to applications anywhere at any time through the best network. Heterogeneous networks have created many challenges such as mobility management, handoff, resource management. For always best connectivity the selection of parameters plays an important role in the decision of vertical handoff, some of parameters are depend upon MT and some are depend upon the network conditions . In this paper we designed Intelligent Vertical Handoff based on Fuzzy Logic Decision model ( IVH-FL), IVH-FL model which has five parameters for vertical handoff decision : Received Signal Strength (RSS), Available bandwidth (B), Users Preference (UP), Mobile Speed (SM) and Power Consumption (PC), with the help of Fuzzy Logic tool box and concept of fuzzy linguistic variables. The results confirmed improvement performance , and reduced the number of unnecessary handover .

The paper presents design methodology for the production process of a new product from the point of view of the assembly operations technology criterion (Design for Assembly - DFA) in the conditions of high-volume production. Mentioned are DFA methods and techniques used in the implementation of a new product. Author presents a new method to assess design for manufacturability based on fuzzy variables based on fuzzy variables. An example was given to illustrate the proposed course of action

Type-2 fuzzy sets were introduced by L. Zadeh aiming at modelling some settings in which fuzzy sets (usually called type-1 fuzzy sets) are not sufficient to reflect certain uncertainty degrees - loosely speaking, they are fuzzy sets whose membership degrees are ordinary fuzzy sets. On the other hand, fiber bundles are topological entities of extreme importance in Mathematics itself and many other scientific areas, like Physics (General Relativity, Field Theory etc.), finance modelling, and statistical inference. The present work introduces a conceptual link between the two ideas and conjectures about the potential mutual benefits that can be obtained from this viewpoint.As an objective and usable product of the presented ideas, it is described a framework for defining type-2 fuzzy hedges, proper to operate on interval type-2 fuzzy sets.

Satellites are subject to various severe vibration during different phases of flight. The concept of satellite smart adapter is proposed in this study to achieve active vibration control of launch vehicle on satellite. The satellite smart adapter has 18 active struts in which the middle section of each strut is made of piezoelectric stack actuator. Comprehensive conceptual design of the satellite smart adapter is presented to indicate the design parameters, requirements and philosophy applied which are based on the reliability and durability criterions to ensure successful functionality of the proposed system. The coupled electromechanical virtual work equation for the piezoelectric stack actuator in each active strut is drived by applying D'Alembert's principle. Modal analysis is performed to characterize the inherent properties of the smart adapter and extraction of a mathematical model of the system. Active vibration control analysis was conducted using fuzzy logic control with triangular membership functions and acceleration feedback. The control results conclude that the proposed satellite smart adapter configuration which benefits from piezoelectric stack actuator as elements of its 18 active struts has high strength and shows excellent robustness and effectiveness in vibration suppression of launch vehicle on satellite.

Objective: This paper aims to build an Effort Estimation Model for design, coding and testing Web Applications Based Fuzzy and Practical Models, which will help in optimizing the efforts in software development. Methods/Analysis: Soft computing approach is adopted and applied in the effort estimation and then compared with practical efforts in the development process with interpreting the historical data available for the existing functionalities. Findings: The effort estimation model presented in this paper focuses on the first level estimates published by Project Managers and the second level estimates presented by Project Leaders or Developers for any new requirement or enhancement for a web application built on 3-tier architecture using Microsoft technologies. The model considers the classification of each task as either Low or Medium or High complexity. These tasks pertain to the lowest level parts in bottom-up estimation. Efforts are estimated for designing, coding and unit testing of these tasks and the efforts are summed up to get the effort estimation for the higher level which is a feature to be implemented. Novelty/Improvement: The paper also discusses about the application of the effort estimation model by taking a new requirement as a case study. The first level estimates calculated using the effort estimation model has a variance of about 25% when compared with the actual effort. This variance is very much acceptable considering the fact that the first level estimates can be tolerable up to 35%. The proposed effort estimation tool would help the project managers to efficiently control the project, manage the resources effectively, and improve the software development process and also trade off analyses among schedule, performance, quality and functionality. Fuzzy logic is used to verify the claims made in efforts estimation. It is proposed a new relation between the number of data and efforts value membership for actual data. And converts it into crisp value in the range [0…1] which helps to classify the complexity of the task and subtask in the design, coding and testing phases.

In the manufacturing industry, cutting tool failure is a probable fault which causes damage to the cutting tools, workpiece quality and unscheduled downtime. It is very important to develop a reliable and inexpensive intelligent tool wear monitoring system for use in cutting processes. A successful monitoring system can effectively maintain machine tools, cutting tool and workpiece. In the present study, the tool condition monitoring system has been developed for Die steel (H13) milling process. Effective design of experiment and robust data acquisition system ensured the machining forces impact in the milling operation. Also, ANFIS based model has been developed based on cutting force-tool wear relationship in this research which has been implemented in the tool wear monitoring system. Prediction model shows that the developed system is accurate enough to perform an online tool wear monitoring system in the milling process.

Human non-conscious reasoning is one of the most successful procedures developed to solve everyday problems in an efficient way. This is why the field of artificial intelligence should analyze, formalize and emulate the multiple ways of non-conscious reasoning with the purpose of applying them in knowledge based systems, neurocomputers and similar devices for aiding people in the problem-solving process. In this paper, a framework for those non-conscious ways of reasoning is presented based on object-oriented representations, fuzzy sets and multivalued logic.

Natural events such as floods, fires, tsunamis, earthquakes and others have nowadays caused serious damage to human beings and nature. The precise detection of these natural events and especially the earthquake has nowadays become the focus of many computer and geoscientific researchers. Computer science and machine learning algorithms have revolutionized early detection and prediction of these events. Hence, a fuzzy method has been initially used in this article to enhance the authenticity of data based on application of effective variables and then combination of neural network algorithms of the MLP perceptron and radial network of RBF in form of a collective learning system in order to more accurately identify seismic events on a small scale. It was observed after simulating the proposed method that the proposed method has significantly improved based on actual error and root-mean-square error (RMSE) criteria compared to basic methods.

This paper presents a) the novel hybrid learning method to train the type-1 non-singleton interval type-3 (IT3) fuzzy logic systems (IT3 NSFLS-1) and b) the novel method named enhanced Wagner-Hagras (EWH) IT3 NSFLS-1 fuzzy systems which includes the level alpha 0 output to calculate the output y alpha using the average of the outputs y alpha k instead of their weighted average. The development of the proposed methodology uses the orthogonal least square (OLS) method to train the consequent parameters and the back propagation (BP) method to train the antecedent parameters. This proposal dynamically changes the parameters of only the level alpha 0 minimizing some criterion function as new information becomes available to each level alpha k. The antecedent sets are type-2 fuzzy sets, the consequent sets are fuzzy centroids, the inputs are type-1 non-singleton fuzzy numbers with uncertain standard deviations, and the secondary membership functions are modeled as two Gaussians with uncertain standard deviation and the same mean. Based on the firing set of the level alpha 0, the proposed methodology calculates each firing set of each level alpha k to dynamically construct and update the EWH IT3 NSFLS-1 (OLS-BP) system. The algorithm was tested in a hot strip mill facility to predict the transfer bar surface temperature showing its superior capability to obtain the industrial pyrometer’s knowledge uncertainty for tuning and its better performance when compared with IT2 SFLS, IT2 NSFLS-1, GT2 SFLS, GT2 NSFLS-1, IT3 SFLS, and IT3 NSFLS-1 trained with the BP-BP algorithm.

The airport ground handling service (AGHS) equipment vendor selection (AGHSEVS) problem is critical for ramp work safety management, because AGHS equipment malfunctions affect airport ramp work safety. Appropriate vendor selection can prevent aircraft damage and delays in airlines schedules, and ensure reliable and high-quality ground handling service. The AGHSEVS problem is a time-consuming and complex process that requires professional knowledge and experience to make judgments. Specifically, AGHSEVS is a multi-criteria decision-making (MCDM) problem. Previous research has seldom integrated MCDM methods with linear and goal programming to solve the AGHSEVS problem. The objective of this study was to develop a new system evaluation model for AGHSEVS by considering both qualitative and quantitative methods. We test the proposed approach on an AGHS company in Taiwan.

The airline sector is critical in today's globalized society, supporting the efficient movement of people and products worldwide. Airlines are continuously looking for methods to enhance their operational performance to remain competitive in the face of increased competition. This study focuses on the application of Multi-Criteria Decision Making (MCDM) techniques to improve low-cost carrier (LCC) also known or low-cost (budget) airlines' ground operational performance. MCDM techniques have gained considerable attention in recent years to address complex decision problems with multiple conflicting goals. This research aims to bridge this gap by proposing a comprehensive framework that combines MCDM techniques to enhance airline operational strategies to increase performance. The study utilizes qualitative and quantitative data, drawing on previously published materials on MCDM techniques in the aviation sector. It utilizes fuzzy Analytic Hierarchy Process (AHP) and fuzzy Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) methodologies. A case study is conducted to evaluate the ground operational performance of three airline companies based in Türkiye, considering five main criteria and 18 sub-criteria. The findings of this research will contribute to a comprehensive understanding of operational performance in the airline sector. It also highlights the implications and limitations of the research and suggests future research directions.

Semantic segmentation of high-resolution remote sensing images provides detailed and precise feature information, playing a pivotal role in decision-making and analysis in sectors such as water management, agriculture, military, and environmental protection. However, most methods merely combine features from various branches directly, without a mechanism for spatial location feature screening, and treat all extracted features as equally important. To overcome these limitations, we introduce a novel spatially adaptive interaction network (SAINet) for dynamic interaction across different features in remote sensing semantic segmentation task. Specifically, we propose a spatial refined module that leverages local context information to filter spatial locations and extract salient regions. Following this, we introduce an innovative spatial interaction module that uses a spatial adaptive modulation mechanism to dynamically select and allocate spatial position weights. This facilitates interaction between local salient areas and global information, allowing the network to focus more on relevant regions. This flexible approach enables the network to capture more informative features, thereby enhancing segmentation accuracy. Experiments conducted on the DeepGlobe, Vaihingen, and Potsdam public datasets confirm the effectiveness and capability of SAINet. Our code and models will be publicly available

For many engineering applications it is sufficient to use the concept of simple materials. However, higher gradients of the kinematic variables are taken into account to model materials with internal length scales as well as to describe localization effects using gradient theories in finite plasticity or fluid mechanics. In many approaches length scale parameter have been introduced that are related to a specific micro structure. An alternative approach is possible, if a thermodynamically consistent framework is used for material modelling as shown in the present contribution. However, even if sophisticated and thermodynamically consistent material models can be established there are still not yet standard experiments to determine higher order material constants. In order to contribute to this ongoing discussion system identification based on the method of self-adaptive filtering is proposed in this paper. To evaluate the effectiveness of this approach it has been applied to second-order gradient materials considering longitudinal vibrations. Based on thermodynamically consistent models that have been solved numerically it has been possible to prove that system identification based on self-adaptive filtering can be used effectively for both narrow-band and broadband signals in the field of second-order gradient materials. It has also been found that the differences identified for simple materials and gradient materials allow for condition monitoring and detection of gradient effects in the material behavior.

Discrete-time architectures offer a distinct advantage over their continuous counterparts, as they can be seamlessly implemented on embedded hardware without the necessity for discretization processes. Yet, because of the difficulty of ensuring Lyapunov difference expressions, their designs, which are based on quadratic Lyapunov-based frameworks, are highly complex. As a result, various existing continuous-time results using adaptive control methods to deal with system uncertainties and coupled dynamics in agents of a multiagent system cannot be directly applied to the discrete-time context. Furthermore, compared to their continuous-time equivalent, discrete-time information exchange based on periodic time intervals is more practical in the control of multiagent systems. In this paper, we first introduce a discrete-time adaptive control architecture designed for uncertain scalar multiagent systems without coupled dynamics as a preliminary result. We then introduce another discrete-time adaptive control approach for uncertain multiagent systems in the presence of coupled dynamics. Our approach incorporates observer dynamics to manage unmeasurable coupled dynamics, along with a user-assigned Laplacian matrix to induce cooperative behaviors among multiple agents. Our solution includes Lyapunov analysis with logarithmic and quadratic Lyapunov functions for guaranteeing asymptotic stability with both controllers. To demonstrate the effectiveness of the proposed control architectures, we provide an illustrative example.

This article focuses on artificial intelligence in educational technology, starting with an introduction to educational technology, an interdisciplinary field of study that covers the design, development, utilization, and evaluation of technology and digital tools in educational Settings. A detailed description of its definition in an academic context - a multidisciplinary field of computer science and cognitive science that deals with the development of computational systems that exhibit intelligent behaviour, describing its areas of coverage and scope of application. It then introduces the benefits of AI in education technology, specifically addressing personalized learning, adaptive learning systems, automated scoring and feedback, virtual tutors and chatbots, data analytics, as well as content recommendations and natural language processing, accessibility and inclusion. Then it introduces the main concepts of AI personalized learning: AI personalized learning uses the power of artificial intelligence to meet the unique needs and preferences of individual learners, as well as its key principles and main characteristics. Adaptive learning systems harness the power of artificial intelligence and data analytics to tailor the learning experience to each student's needs and abilities, as well as its core principles and strengths. It also introduces the main operating principles of automated grading and feedback: it uses artificial intelligence and computer algorithms to evaluate and evaluate student assignments, tests and exams without the direct involvement of human graders, and its associated benefits. Secondly, the main concepts of virtual tutor are introduced: Virtual tutor is a computer-based system that uses artificial intelligence and machine learning algorithms to provide students with personalized and interactive educational support and its key characteristics and main advantages, and then the nature and benefits of chatbots and help in the field of education. The final conclusion summarizes the benefits and future challenges of integrating AI into educational technology.

Since 2019, notable global viral outbreaks have occurred necessitating further research and healthcare system investigations. Following the COVID—19 pandemic, an unexpected duality has occurred of SARS–CoV–2 and monkeypox virus (MPXV) infections. Monkeypox virus is of the Orthopoxviridae genus, belonging to the family Poxviridae. Zoonotic transmission (animal to human transmission) may occur. The Orthopoxviridae genus includes other Orthopoxviruses (OPXV) present in animal host reservoirs that include cowpox viruses (CPXV), vaccinia virus (VACV) and variola virus (VARV), with the latter being causal agent of smallpox and excessive mortality. The aim in this review is to present facts about MPXV specific pathogenesis, epidemiology, and immunology alongside historical perspectives. Monkeypox virus was rarely reported outside Africa before April 2000. Early research since 1796 contributed towards eradication of VARV leading to immunisation strategies. The World Health Organisation (WHO) announcement that VARV had been eradicated was confirmed in 1980. On the 23rd of July 2022, the WHO announced MPXV as a health emergency. Therefore, concern due to propagation of MPXV causing MPOX disease requires clarity. Infected hosts display symptoms like extensive cellular initiated rashes and lesions. Infection with MPXV makes it difficult to differentiate from other diseases or skin conditions. Anti–viral therapeutic drugs were typically prescribed for smallpox and MPOX disease; however, the molecular and immunological mechanisms with cellular changes remain of interest. Furthermore, no official authorised treatment exists for MPOX disease. Some humans across the globe may be considered at risk. Historically, presenting symptoms of MPOX resemble other viral diseases. Symptoms include rashes or lesions like Streptococcus, but also human herpes viruses (HHV) including Varicella zoster (VZV).

Due to the complex underground environment, pumping machines are prone to produce numerous failures. The indicator diagrams of faults are similar in a certain degree, which produces indistinguishable samples. As the samples increases, manual diagnosis becomes difficult, which decreases the accuracy of fault diagnosis. For accurately and quickly judging the fault type, we propose an improved adaptive activation function and apply it to five types of neural networks. The adaptive activation function improves the negative semi-axis slope of the ReLU activation function by combining the gated channel conversion unit to improve the performance of the deep learning model. The proposed adaptive activation function is compared with the traditional activation function through the fault diagnosis data set and the public data set. The results show that the activation function has better nonlinearity, can improve the generalization performance of deep learning model, the accuracy of fault diagnosis. In addition, the proposed adaptive activation function can also be well embedded in other neural networks.

CD4+ T cells orchestrate and regulate immunity within jawed vertebrates, yet our understanding of their evolution, development, and cellular physiology has only begun to be unearthed in the past few decades. Discoveries of genetic diseases that ablate this cellular population have provided insight into their critical functions while transcriptomics, proteomics, and highresolution microscopy have recently revealed new insights into CD4+ T cell anatomy and physiology. This article compiles historical, microscopic, and multi omics data which can be used as a reference atlas to dissect cellular physiology within these influential cells and further understand pathologies like HIV infection that inflict human CD4+ T cells.

The development of anti-pain technologies in the complex treatment of pain syndromes is one of the most urgent tasks of modern medicine. We have undertaken a placebo-controlled experimental study of the therapeutic potential of low-intensity laser radiation when applied to acupuncture points, which are directly related to the autonomic nervous system. The adaptation effect of puncture photobiomodulation on the induction of stress-mediated autonomic reactions, oxidative metabolism and microcirculation in animals during the acute phase of pain stress was revealed. The data obtained are of interest for use in the complex rehabilitation of patients with pain syndrome.

In recent years, gamification has captured the attention of researchers and educators, particularly in science education, where students often express negative emotions. Gamification methods aim to motivate learners to participate in learning by incorporating intrinsic and extrinsic motivational factors. However, the effectiveness of gamification has yielded varying outcomes, prompting researchers to explore adaptive gamification as an alternative approach. Nevertheless, there needs to be more research on adaptive gamification approaches, particularly concerning motivation, which is the primary objective of gamification. In this study, we developed and tested an adaptive gamification environment based on specific motivational and psychological frameworks. This environment incorporated adaptive criteria, learning strategies, gaming elements, and all crucial aspects of science education for six classes of 3rd-grade students in primary school. We employed a quantitative approach to gain insights into the motivational impact on students and their perception of the adaptive gamification application. We aimed to understand how each game element experienced by students influenced their motivation. The findings of our study revealed encouraging results in terms of increased motivation and engagement among students, as well as the influence of different game elements when connected with an individual's profile based on a multidimensional adaptive framework.

Routing a person through a traffic network presents a tension between selecting a fixed route that is easy to navigate and selecting an aggressively adaptive route that minimizes the expected travel time. We propose to create non-aggressive adaptive routes in the middle-ground seeking the best of both these extremes. Specifically, these routes still adapt to changing traffic conditions, however we limit the number of adjustments made in the route. This improves the user experience, by providing a continuum of options between saving travel time and minimizing navigation. We design strategies to model single and multiple route adjustments, and investigate enumerative techniques to solve these models. To alleviate the intractability with handling real-life traffic data, we develop efficient algorithms with easily computable lower and upper bounds. We finally present computational experiments highlighting the benefits of limited adaptability in terms of reducing the expected travel time.

Wireless cellular communication technology has developed into a very resourceful commodity worldwide. Today, people of all races can hardly live without means of voice and data cellular communication technology. Imprecise propagation loss estimation leads to high power waste, high co-channel interference and poor service quality in cellular communication system networks. This paper proposes a realistic adaptive fine-tuning method for distinctive propagation loss estimation over a microcellular communication radio links based on signal power measurements from Long Term Evolution radio broadband networks, taking non-line of sight (NLOS) and line of sight (LOS) environments into consideration. The methodology is verified by measurements taken in non-line of sight and line of sight signal propagation scenarios. The results showed that the estimated propagation losses using the proposed realistic adaptive tuning models were more accurate than the existing Cost -231 modelling estimation approach

Wireless cellular communication technology has developed into a very resourceful commodity worldwide. Today, people of all races can hardly live without means of voice and data cellular communication technology. Imprecise propagation loss estimation leads to high power waste, high co-channel interference and poor service quality in cellular communication system networks. This paper proposes a realistic adaptive fine-tuning method for distinctive propagation loss estimation over a microcellular communication radio links based on signal power measurements from Long Term Evolution radio broadband networks, taking non-line of sight (NLOS) and line of sight (LOS) environments into consideration. The methodology is verified by measurements taken in non-line of sight and line of sight signal propagation scenarios. The results showed that the estimated propagation losses using the proposed realistic adaptive tuning models were more accurate than the existing Cost -231 modelling estimation approach.

The runtime environment is an important concern for self-adaptive systems (SASs). Although researchers have proposed many approaches for developing SASs that address the issue of uncertain runtime environments, the understanding of these environments varies depending on the objectives, perspectives, and assumptions of the research. Thus, the current understanding of the environment in SAS development is ambiguous and abstract. To make this understanding more concrete, we describe the landscape in this area through a systematic literature review (SLR). We examined 128 primary studies and 14 unique environment models. We investigated concepts of the environment depicted in the primary studies and the proposed environment models based on their ability to aid in understanding. This illustrates the characteristics of the SAS environment, the associated emerging environmental uncertainties, and what is expressed in the existing environment models. This paper makes explicit the implicit understanding about the environment made by the SAS research community and organizes and visualizes them.

Multiple sclerosis (MS) is a chronic autoimmune disease that affects the central nervous system (CNS) characterized by varying degrees of demyelination of uncertain etiology, and is associated with specific environmental and genetic factors. Upon recognition of CNS antigens, the immune cells initiate an inflammatory process which leads to destruction and deterioration of the neurons. Innate immune cells such as macrophages, dendritic cells and natural killer cells are known to play critical roles in the pathogenesis of MS. Also, the activation of peripheral CD4+ T cells by CNS antigens leads to their extravasation into the CNS causing damages that exacerbates the disease. This could be accompanied by dysregulation of T regulatory cells and other cell types functions. Experimental autoimmune encephalomyelitis (EAE) is a mouse model used to study the pathophysiology of MS disease. In this review, we highlight the roles of innate and adaptive immune players in the pathogenesis of MS and EAE.

The paper deals with the navigation data exchange between two satellites moving in a swarm. It is focused on reduction of the inter-satellite demanded communication channel capacity taking into account dynamics of the satellites relative motion and possible erasing in the channel the navigation data. The feedback control law is designed ensuring regulation of the relative satellites motion. The adaptive binary coding/decoding procedure for the satellites navigation data transmission over the limited capacity communication channel is proposed and studied for the cases of ideal and erasure channels. Dependence of the regulation time on the data transmission rate is numerically evaluated. Results of the numerical study of the closed-loop system performance and accuracy of the data transmission algorithm on the communication channel bitrate and erasure probability are obtained based on the extensive simulations. These results provide dependence of the required load of the communication channel on the desired quality of the regulation process. It is shown that both data transmission error and regulation time depend inversely proportional on the communication rate, and that for the significantly high data transmission rate erasure of data in the channel with probability up to 0.3 does not make an effect on the regulation time.

Standard evolutionary theory, supported by mathematical modelling of outbred, dispersed populations predicts that ageing is not an adaptation. We recently argued that in clonal, viscous populations, programmed organismal death could promote fitness through social benefits and has, in some organisms (e.g. Caenorhabditis elegans), evolved to shorten lifespan. Here we review previous adaptive death theory, including consumer sacrifice, biomass sacrifice, and defensive sacrifice types of altruistic adaptive death. In addition we discuss possible adaptive death in semelparous fish, coevolution of reproductive and adaptive death, and adaptive reproductive senescence in C. elegans. We also describe findings from recent tests for the existence of adaptive death in C. elegans using computer modelling. Such models have provided new insights into how trade-offs between fitness at the individual and colony levels mean that senescent changes can be selected traits. Exploring further the relationship between adaptive death and social interactions, we consider examples where adaptive death results more from action of kin than from self-destructive mechanisms and, to describe this, introduce the term adaptive killing of kin.

We applied a framework to assess climate change vulnerability of 52 major vegetation types in the western United States to provide spatially-explicit input to adaptive management decisions. The framework addressed climate exposure and ecosystem resilience; the latter derived from analyses of ecosystem sensitivity and adaptive capacity. Measures of climate change exposure used observed climate change (1981-2014) and then climate projections for the mid-21st century (2040-2069 RCP 4.5). Measures of resilience included (under ecosystem sensitivity) landscape intactness, invasive species, fire regime alteration, and forest insect & disease risk, and (under adaptive capacity), measures for topo-climate variability, diversity with functional species groups, and vulnerability of any keystone species. Outputs are generated per 100km² hexagonal area for each type. As of 2014, moderate climate change vulnerability was indicated for >50% of the area of 50 of 52 types. By the mid-21^st century, all but 19 types face high or very high vulnerability with >50% of the area scoring in these categories. Measures for resilience explain most components of vulnerability as of 2014, with most targeted vegetation scoring low in adaptive capacity measures and variably for specific sensitivity measures. Elevated climate exposure explains increases in vulnerability between the current and mid-century time periods.

Using the sustainable livelihoods analytical framework, adaptability of cattle raising to multiple stressors (e.g. climate change and market conditions) in the dry tropics of Chiapas, Mexico was evaluated. Three case studies located in the Frailesca region of Chiapas were analyzed: (I) peasant cattle raising in a rural village in the Frailesca Valley; (II) peasant cattle raising in a rural village in a natural protected area in the Frailesca Highlands; and (III) holistic cattle raising by farmers with private land ownership in the Frailesca Valley. Adaptability was evaluated using an index on a scale of one to a hundred; average values were: case I = 20.9 ± 1.4; case II = 32.1 ± 1.8; and case III = 63.6 ± 3.5. In order to increase farms adaptability and reduce the vulnerability of cattle raising families, there is a need to modify public policy to take into account the conditions of the most vulnerable farmers (cases I and II). Given the economic, environmental, and social context of Mexico´s dry tropics, establishing ecological or organic cattle raising and silvopastoral systems may reduce the vulnerability of farm families and increase their level of adaptability of their farms to multiple stressors.

When a rotary machine is running, from which the acquired vibro-acoustic signals enable to reveal its operation status and health condition. The study proposed a DSP-based adaptive angular-velocity Vold-Kalman filtering order tracking (AV2KF_OT) algorithm with an online real-time nature for signal interpretation and machine condition monitoring. Theoretical derivation and numerical implementation of computation schemes are briefly introduced. An online real-time monitoring system based on the AV2KF_OT algorithm, which was implemented through both a digital signal processor and a user interface coded by using LabVIEW, was developed. Two experimental tasks were applied to justify the proposed technique, including (i) the detection of startup on the fluid-induced whirl performed through a journal-bearing rotor rig, and (ii) the separation of close orders from the measured signals of a multifunction transmission-element ball-bearing bench.

Neurodevelopmental disorders are characterized by an amalgam of genetic and epigenetic faults implicating neuronal protein-related loss-of-function and gain-of-function respectively, hence their inclusion into the category of complex diseases. Neurodevelopmental disorders are regarded as autism spectrum disorder due to this reason; that the risk factors and phenotype constitute a spectrum of faults and protein overactivity. One example of an epigenetic factor leading to the onset of neurodevelopmental delays constitutes a set of immune response-based dysregulations, as well as the excessive growth of the adaptive immune memory of the fetus or the baby following significant infectious disease during pregnancy, as well as in babies aged 0-2, given the existence of profound links between developmental immunity and developmental neurology. Given that genetic information very likely represents a form of energy, the intake of excessive pathogen-related information may transiently overload the adaptive immune memory similarly to the manner functional pathogens do whilst inducing significant illness, and if events as such occur during important stages of neuro-immunological development, then there could often be irreversible effects upon the rate of development in neurological networks that normally have a major importance in the modulation of the related cognitive and behavioral phenotype. The full extent of evidence may only be obtained via a thorough study of the applications of physical laws into biology and medicine, given the foundational role of the physical matter in the development and maintenance of life. A common misconception is that neurodevelopmental delays are characterized solely by an accumulation of protein loss-of-function incidences in the central nervous system area, rather than a disruption of neuronal region developmental rates. For example, an overexpression of neuronal proteins related to cognition factors that is accompanied by an underexpression of proteins related to social behavior is phenotypically manifested in people with sharper rational thinking and poorer communication skills, with an impact on the abilities of decision-making as well, and this tends to be regarded as a classical example of the clinical manifestation of neurodevelopmental delays. More severe forms of autism spectrum disorder tend to implicate a more generalistic impact upon the developmental rates of key human behaviors, including those related with the development and maintenance of social and intimate relationships. Likewise, more severe implications upon regular developmental rates tend to bring a major impact upon the healthy function of related functions. As a result, lower functioning forms of neurodevelopmental delays bring fresh concerns with regards to a possible uncanny increase of incidences of deviated sexuality during years of adulthood, and in the worst cases, such deviations may lead to the planning and development of criminal activity, particularly in individuals who are or become prone to breaking the moral code that established the civilized society. What holds the concerns valid is the exponential increase in the number of lower functioning autism cases throughout the world and the major signs that such an increase will continue with a full force. One major solution to this potential future problem would be a much higher investment into awareness of the exact genetic and environmental factors that directly or indirectly result in the onset of lower-functioning autism and of the current research efforts to develop the matching support for people found in situations as such. The most important aim of future research with regards to such a scenario would be a separation of disease and disability with choices made to step into more severe forms of disease and into areas that are outside of the established moral circle.

Neuromuscular symptoms in long COVID patients are common. Since adequate diagnostics are still missing, investigating muscle function might be beneficial. The holding capacity (maximal isometric Adaptive Force; AFisomax) was previously suggested to be especially vulnerable for impairments. This longitudinal, non-clinical study aimed to investigate the AF in long COVID patients in recovery process. AF parameters of elbow/hip flexors were assessed in 17 patients at three timepoints (pre: long COVID state, post: immediately after first treatment, end: recovery) by an objectified manual muscle test. The tester applied an increasing force on the limb of the patient, who had to resist isometrically for as long as possible. The intensity of 13 common symptoms were queried. At pre, patients started to lengthen their muscles at ~50% of the maximal AF (AFmax), which was then reached during eccentric motion, indicating unstable adaptation. At post and end, AFisomax increased significantly to ~99% and 100% of AFmax, respectively, reflecting stable adaptation. AFmax was statistically similar for all three timepoints. Symptoms intensity decreased significantly from pre to end. In conclusion, maximal holding capacity seems to be impaired in long COVID patients and increases with substantial health improvement. AFisomax might be a suitable sensitive functional parameter to assess long COVID patients and to support therapy process.

This paper provides a comprehensive analysis of food security in Sudan by adopting a unique approach of Hesitant Fuzzy Entropy (HFE) analysis to discern the key determinants influencing food security levels and aligning the findings with the Integrated Food Security Phase Classification (IPC) framework. The research utilized a dataset comprising 32 crucial variables related to food security assessment. Employing entropy values, weight coefficients, heatmaps, and scatterplots, the analysis aimed to unravel the intricate distribution of food security levels among Sudanese individuals in our study area. The study reveals that approximately 26% of the Sudanese population in our study region is poised to experience food security, with an additional 24% categorized as marginally food secure. Moreover, an estimated 35% are expected to confront moderate food insecurity, while 15% are projected to face severe food insecurity between January and June 2024. Anticipations for the period from January 2024 to June 2024 project more than 15 million individuals to encounter IPC Phase 3 and fall under moderately or severely food insecure levels. These findings emphasize the urgent need for both short-term humanitarian aid and long-term strategies to address Sudan's deepening food insecurity crisis.