Abstract: Increasing population and urbanization are affecting human health and comfort. In order to get rid of these affects, mankind is changing its enviroment and looking for new life areas. This study investigates the influence of Land Cover Change (LCC) and Normalisied Densly Vegetation Index (NDVI) on Land Surface Temperature (LST) of Fethiye-Göcek Specially Protected Area (SEPA) in easterm mediterranean basin. In the study LCC, NDVI and LST were drived from landsat 5, 7 and 8 satellite image of resolation at 30x30 m acquired between 1995-2020. LST were computed based on Land Use/Land Cover (LULC) types. The Corine Index were used for determination of land uses. The results indicated that water, forest and maquia lands decreasing while urban fabric and bare lands are increasing depend upon the urbanization and forest fires in the basin. These changes in LULC widened the temperature differences between the urban and rural areas. The change in LST is associated with changes in constructional materials in urban land and in vegetation abundance both in the urban and rural areas. Vegetation has an important factor in the temperature of different land covers. That produces warming trend in temperetaure in built-up areas it causes to keep other lands warmer in cold weather. Another important result is affective Urban Heat Island (UHI) on climate change based on the impact of urbanization and land cover changes. Significantly possitive correlation were found between the urbanization rate, population and built-up area and warming rate of average air temperature and so the LST.

Corresponding to the principles of biological synapses, an essential prerequisite for hardware neural networks using electronics devices is continuous regulation of conductance. We implemented artificial synaptic characteristics in a (GeTe/Sb2Te3)16 iPCM with a superlattice structure under optimized identical pulse trains. Based on atomically controlling the Ge switch in the phase transition that appears in the GeTe/Sb2Te3 superlattice structure, multiple conductance states were implemented by applying the appropriate electrical pulses. Furthermore, we found that the bidirectional switching behavior of a (GeTe/Sb2Te3)16 iPCM can achieve a desired resistance level using the pulse width. Therefore, we also fabricated a Ge2Sb2Te5 PCM and designed a pulse scheme based on the phase transition mechanism to compare to the (GeTe/Sb2Te3)16 iPCM. We designed an identical pulse scheme that implements linear and symmetrical LTP and LTD based on the iPCM mechanism. As a result, the (GeTe/Sb2Te3)16 iPCM showed relatively excellent synaptic characteristics by implementing gradual conductance modulation, a nonlinearity value of 0.32, and LTP/LTD 40 conductance states using identical pulses trains. Our results demonstrate the general applicability of the artificial synaptic device for potential use in neuro-inspired computing and next generation non-volatile memory.

Land use/land cover (LULC) and climate changes are two main factors directly affecting hydrologic conditions. However, very few studies in Vietnam have investigated changes in hydrological process under the impact of climate and land use changes on a basin scale. The objective of this study is to assess the individual and combined impacts of land use and climate changes on hydrological processes for the Nam Rom river basin, Northwestern Viet Nam using Remote Sensing (RS) and Soil and Water Assessment Tools (SWAT) model. SWAT model was used for hydrological process simulation. Results indicated that SWAT proved to be a powerful tool in simulating the impacts of land use and climate change on catchment hydrology. The change in historical land use between 1992 and 2015 strongly contributed to increasing hydrological processes (ET, percolation, ground water, and water yield), whereas, climate change led to significant decrease of all hydrological components. The combination of land use and climate changes significantly reduced surface runoff (-16.9%), ground water (-5.7%), water yield (-9.2%), and sediment load (-4.9%). Overall climatic changes had more significant effect on hydrological components than land use changes in the Nam Rom river basin during the 1992–2015. Under impacts of projected land use and climate change scenarios in 2030 on hydrological process of the upper Nam Rom river basin indicate that ET and surface flow are more sensitive to the changes in land use and climate in the future. In conclusion, the findings of this study will basic knowledge of the effects of climate and land-use changes on the hydrology for future development of integrated land use and water management practices in Nam Rom river basin.

The key anthropogenic effects on climate include the changes in land use and emission of greenhouse gases into the atmosphere. Depletion of vegetation poses serious threat that speeds the process of climate change and reduces carbon sequestration by the environment. Thus, the preservation of natural environment in urban areas is an essential component of the garden city model, proposed by Sir Ebenezer Howard in 1898, to ensure ecological balance. Recent Landsat images showed that Kumasi does not have the required percentage of green vegetation as was stipulated in the garden city model on which the city was built. It was observed that most parts of Kumasi's green vegetation have been lost to built environments. This study was conducted to assess the impact of urbanization on the garden city status and its effect on the micro-climate of the city. Significant changes in the vegetation cover of the city was evaluated from Landsat-TM imagery and analysis of a long term climatic data of Kumasi carried out over a 55-year period (1960 to 2015). It was observed that, climatic conditions have slightly changed, as mean surface temperature of has increased by 1.2 °C/ 55 years, due to the significant landuse changes from development of non-transpiring, reduced evaporative urban surfaces. However, the impact is not greatly felt due to the geographical location of the city on the globe despite the evidence of a considerable temperature change. Green vegetation conservation for the city is recommended as a top priority in future for city authorities and planners.

We have considered a SEIR-SEI Vector-host mathematical model which captures malaria transmission dynamics, described and built on 7-dimensional nonlinear ordinary differential equations. We compute the basic reproduction number of the model; examine the positivity and boundedness of the model compartments in a region using well established methods viz: Cauchy’s differential theorem, Birkhoff & Rota’s theorem which verifies and reveals the well-posedness, and carrying capacity of the model respectively, the existence of the Disease-Free (DFE) and Endemic (EDE) equilibrium points were determined and examined. Using the Gaussian elimination method and the Routh-hurwitz criterion, we convey stability analyses at DFE and EDE points which indicates that the DFE (malaria-free) and the EDE (epidemic outbreak) point occurs when the basic reproduction number is less than unity (one) and greater than unity (one) respectively. We obtain a solution to the model using the Variational iteration method (VIM) (an unprecedented method) to each population compartments and verify the efficacy, reliability and validity of the proposed method by comparing the respective solutions via tables and combined plots with the computer in-built Runge-kutta-Felhberg of fourth-fifths order (RKF-45). We illustrate the combined plot profiles of each compartment in the model, showing the dynamic behavior of these compartments; then we speculate that VIM is efficient and capable to conduct analysis on Malaria models and other epidemiological models.

This paper explores the imminent threat posed by climate change to the unique platypus species. It delves into the ecological repercussions of global temperature rise and altered climate patterns on platypus habitats. The study emphasises the multifaceted impacts, including changes in aquatic habitat quality, food sources, and breeding rituals. Climate-induced shifts in phytoplankton spring blooms and anthropogenic pressures further endanger the platypus's habitat. The article stresses the importance of understanding these effects for both species conservation and anticipating broader ecological and socio-economic consequences. Mitigating climate change impacts requires a multidimensional approach, involving habitat manipulation and restoration strategies.

Carbon (C) is one of the most abundant elements. It is part of all living organisms and is found in all states of matter (solid, liquid, gas, and plasma). It can take the form of one of the hardest and transparent materials (diamond) or it can be flexible and dark ( graphite), with many carbonaceous materials at both extremes. In gaseous form, C is a component of several greenhouse gas emitted during the combustion of fossil fuels. Carbon movement between the atmosphere, land (biosphere and lithosphere), and ocean (hydrosphere) can alter total amounts in each pool. Human activities accelerate C movement into the atmosphere, causing increases in climate change. This shift from terrestrial and oceanic C pools to the atmosphere cause an increase in the intensity and duration of droughts, hurricanes, snowstorms, and other natural phenomenon. Although society hears about C emissions there is a lack of understanding of its importance and the need to decrease C in the atmospheric pool to avoid exacerbating climate change. Forests and biochar are two biological methods to retain C in the terrestrial pool for long time and at very low cost. This review details where C comes from, its relationship with forests, and biochar and their roles in increasing carbon sequestration to limit the impacts of climate change and continue having future sustainable forests and ecosystems services that we enjoy today.

Puerto Rico is a neotropical island located in the Caribbean. Like other neotropical regions, Puerto Rico streams discharges can vary with the seasons, atmospheric events, and human activities. The Lapa River is part of the Puerto Rico Heritage Rivers Program. This program identifies and manages the protection of hydrographic systems that maintain their natural conditions. The necessity of increasing the knowledge of the natural processes of the Lapa River and providing valuable information for the development of a future management plan for the ecosystem, the following objectives were established in this research: (1) to describe the temporal variations in water discharges in the Lapa River and (2) to describe the impact of atmospheric events on the water discharges at the Lapa River. This study concluded that the highest annual discharge averages recorded from 1989 to 2021 in the Lapa River occurred in 2011 and 2017. 2011, the annual mean discharge was 31.20 (ft3/s); in 2017, the average was 40.44 (ft3/s). In terms of atmospheric events, this study concludes that, during the evaluated period, the highest discharge event occurred after the impact of hurricanes Irma and Maria, with an average discharge of 164.40 ft3/s in October and 182.60 ft3/s in September. This event set a precedent in the river Lapa’s discharges, impacting the river basin’s flora, fauna, and morphology from its headwaters downstream.

Climate changes caused by anthropogenic actions can directly and indirectly affect living beings, including parasites and their hosts. Changes such as water temperature, pH, distribution of nutrients in the aquatic environment are some examples that can interfere with the fish community, whether in open water or in production systems. In this review, we will show how climate change can affect the adaptation of hosts and parasites in the aquatic environment and how these parasites can be used for environmental monitoring.

Introduction. Environmental Health in a Global World at New York University was re-designed as a class participatory effort, challenging undergraduate students to understand environmental hazards and the resultant adverse health outcomes by embracing the inherent complexity of environmental risks and proposing solutions. Methods. Following introductory lectures, students are placed into teams and assigned a specific perspective, or avatar, which includes learning to see the challenge from the perspective of a technical expert such as a biologist, an engineer, or an anthropologist. The teams then design specific systems maps to visualize the complex interactions that lead to adverse health outcomes after a given environmental exposure. The maps highlight potential leverage points, where relatively minor interventions can provide a disproportionate benefit in health outcomes. The teams then explore potential interventions and identify the potential unintended consequences of those actions, develop and advocate for innovative new strategies to mitigate risk and improve outcomes. Results and Discussion. Over the past 5 years we have taught this methodology to over 680 students with strong, student-oriented results. The teams created and presented more than 100 strategies, addressing a diverse set of environmental challenges that include water contamination, gun violence, air pollution, environmental justice, health security, and climate change. Developing the strategies helped the students understand environmental threats in a more holistic way, provided them with some agency in finding solutions, and offered an opportunity for them to improve their presentation skills. The responses in course evaluations have been enthusiastic, with many students reporting a deep impact on their college experience.

The study aims to investigate the impacts of climate change on butterfly populations Thimphu district of Bhutan. Butterflies are indicators of environmental factors and can act as an early warning of impending changes in local flora and fauna. The study will involve citizen science with participants using iNaturalist and Seek applications to capture butterfly data in various habitat areas in the Thimphu district. The data collected will be analyzed using Statistics Kit for Social Sciences (SPSS), Nvivo, and Geographical Information System (GIS) programs. The results of the research will be disseminated through awareness campaigns to increase public understanding of the value of butterfly protection in the conservation of healthy environments. The study's findings will be used to develop conservation initiatives to maintain biodiversity and assess the impacts of climate change.

Turmeric is highly tolerant to several climatic changes and can grow under high temperatures and moderate drought conditions. This herb is very much dependant on optimum rainfall, optimum heat with less chilling or freezing conditions. These conditions if are more than normal would tend to reduce the yields of the crops and also effect the productivity. To reduce such drastic yield losses certain conventional plant breeding methods were employed but were very less effective compared to plant biotechnology. To reduce these loses by stresses, extensive and effective molecular biology methods were employed which identifies the genes that are stress responsive along with certain methods like gene transfer, genetic engineering was also known to be effective. All these methods are quite helpful in mitigating the yield losses and promoting healthy growth in the plants. The maintenance of rhizome size, curcumin content, essential oils etc. is very much necessary for the turmeric crop because of its role, especially in the medical field. Therefore, the yield losses are reduced to a maximum extent so that development of smart turmeric is easy and crop designing is possible only with the advanced techniques involved in agriculture biotechnology.

In contrast to animals, adult organs in plants are not determined during embryogenesis but gen-erated from meristematic cells as plants advance through development. Plant development in-volves a succession of different phenotypic stages and the transition between these stages is termed phase transition. Phase transitions need to be tightly regulated and coordinated to ensure they occur under optimal seasonal, environmental conditions. Polycarpic perennials transition through vegetative stages and the mature, reproductive stage many times during their lifecycles and, in both perennial and annual species, environmental factors and culturing methods can re-verse the otherwise unidirectional vector of plant development. Epigenetic factors regulating gene expression in response to internal cues and external (environmental) stimuli influencing the plant’s phenotype and development have been shown to control phase transitions. How develop-mental and environmental cues interact to epigenetically alter gene expression and influence these transitions are not well understood and understanding this interaction is important considering the current climate change scenarios, since epigenetic maladaptation could have catastrophic con-sequences for perennial plants in natural and agricultural ecosystems. Here we review studies focussing on the epigenetic regulators of the vegetative phase change and highlight how these mechanisms might act in exogenously induced plant rejuvenation and regrowth following stress.

This research analyzes the Physical Education students’ degree of academic performance with the incorporation of active methodologies, specifically the flipped classroom mixed learning, restricted to evaluation periods in the months of June and September. The study focuses on whether there are significant differences in this variable through the scores obtained. Through a simple random sampling, 131 students participated in this empiric-analytic research, using an ex-post-facto study with a retrospective design with quasi control group. A robust test of averages comparison, multiple linear regressions and an evaluation of the relative importance of predictors is conducted. The results show how flipped classroom methodology linearly and positively influences academic performance and correlationally motivation and support. As main conclusion, in a hybrid and digitalized learning context, the value of the consideration of active methodologies (flipped classroom) based on emerging pedagogies, allows improving students’ achievement and competence development, providing critical, significant, ubiquitous, transformational and especially motivating experiences.

Land cover and climate changes greatly influence hydrologic responses of a basin. However, the response vary from basin to basin depending on the nature and severity of the changes and basin characteristics. Moreover, the combined impacts of the changes affect hydrologic responses of a basin in an offsetting or synergistic manner. This study quantified the separate and combined impacts, and the relative contributions of land cover and climate changes on multiple hydrological regimes (i.e., surface runoff, streamflow, groundwater recharge evapotranspiration) for the Dhidhessa Subbasin. Land cover and climate change data were obtained from a recent study completed for the basin. Calibrated Soil and Water Analysis Tool (SWAT) was used to quantify the impacts. The result showed that SWAT model performed well for the Dhidhessa Subbasin in predicting the water balance components. Substantial land cover change as well as an increasing temperature and rainfall trends were reported in the river basin during the past three decades. In response to these changes, surface runoff, streamflow and actual evapotranspiration (AET) increased while groundwater recharge declined. Surface runoff was more sensitive to land cover than to climate changes whereas streamflow and AET were more sensitive to climate change than to land cover change. The combined impacts played offsetting effect on groundwater recharge and AET while inconsistent effects within study periods for other hydrologic responses. Overall, the predicted hydrologic responses will have negative impacts on agricultural production and water resources availability. Therefore, the implementation of integrated watershed management strategies such as soil and water conservation and afforestation could reverse the negative impacts.

The paper presents the results of high precision control survey carried out in the underground mining of Oyu Tolgoi project using terrestrial laser scanning technology. The purpose of the measurements is to ensure the heading, total length and volume of the penetration and excavation works are being implementing in accordance with the planned and designed dimensions. We established a network of 18 reference points in the tunnel of the selected underground level which were repeatedly measured 4 times by two round readings of the Trimble S7 tacheometry and processed by using the Trimble Business Center software. All points except the one was within the permissible error. Based on these points the excavation length and volumes were determined using the Trimble SX12 laser scanner. The difference between the planned work quantity provided by the Oyu Tolgoi project and the actual values measured by the laser scanning was calculated using the comparative method. The TLS partial control measurements in the excavations made through the ore bodies revealed the length of 20285.72 m and volume of 441128.80 m3 for underground 7 mine levels while their project values were 16158.26 m length and 422837.50 m3 volume, respectively.

The research of object classification and part segmentation is a hot topic in computer vision. A considerable number of studies have been carried out about deep learning on 3D point clouds. However,it is challenging to achieve effective feature learning due to sparsity of point clouds. Recently, a variety of Transformers have been adopted to improve point cloud processing and display great potential. Nevertheless, large numbers of Transformer layers tend to incur huge computational and memory costs. PointNet++ is one of the most influential neural architectures for point cloud understanding. Although the accuracy of PointNet++ has been largely surpassed by recent networks, this does not mean that PointNet++ has no potential.Thus, this paper offer two major contributions that significantly improve PointNet++ performance. Firstly, we introduce a novel contextual feature extraction (CFE) block that significantly enhances the feature extraction capabilities of PointNet++ networks. Secondly, to further enhance feature fusion, we seamlessly integrate a mutual learning (ML) block into the network architecture. By embedding these two innovative blocks within each layer of the network, we not only enrich the network's functionality but also impart it with greater robustness and adaptability. The specific experiments were conducted on the S3DIS (6-fold cross-validation) and Modelnet40 datasets with 86.5% and 92.7% accuracy, respectively, which proved that our model is comparable or even better than most existing methods for classification and segmentation tasks.

In this paper, a new full-Newton step feasible interior point method for convex quadratic programming is presented and analyzed. The idea behind this method is to replace the complementarity condition with a non-negative variable weight vector and use the algebraic equivalent transformation for the obtained equation. Under the selection of appropriate parameters, the quadratic rate of convergence of the new algorithm is established. In addition, the iteration complexity of the algorithm is obtained. Finally, some numerical results are presented to demonstrate the practical performance of the proposed algorithm.

The process of blood coagulation, wherein circulating blood transforms into a clot in response to internal or external injury, is a critical physiological mechanism. Monitoring this coagulation process is vital to ensure that blood clotting occurs neither too rapidly nor too slowly. Anticoagulants, a category of medications designed to prevent and treat blood clots, require meticulous monitoring to optimise dosage, enhance clinical outcomes, and minimise adverse effects. This review article delves into the various stages of blood coagulation, explores commonly used anticoagulants and their targets within the coagulation enzyme system, and emphasises the electrochemical methods employed in anticoagulant testing. Electrochemical sensors for anticoagulant monitoring are categorised into two types. The first type focuses on assays measuring thrombin activity via electrochemical techniques. The second type involves modified electrode surfaces that either directly measure the redox behaviour of anticoagulants or monitor the response of standard redox probes in the presence of these drugs. The review provides a comprehensive list of different electrode compositions and their detection and quantification limits. Additionally, it discusses the potential of employing a universal calibration plot to replace individual drug-specific calibrations. The insights presented are anticipated to significantly contribute to the sensor community's efforts in this field.

This study aimed to investigate the effect of adding Mirror Visual Feedback Therapy (MFT) after Dry Needling (DDN) on sensitivity and motor performance in patients diagnosed with Post-Needling pain from Myofascial Trigger Points (MTrPs) in lateral elbow pain patients. A randomized, controlled, two-arm pilot trial following Consolidated Standards of Reporting Trials (CONSORT) was conducted at the European University of Madrid between February 1, 2023, and June 2, 2023. A total of 49 patients (F=23, M=26) were randomly assigned to the Experimental Group Deep Dry Needling, Ischemic Compression, Cold Spray, Stretching, and Mirror Therapy (n=25), and the others receiving the same interventions without Mirror Therapy (n=24). Pre- and post-treatment assessments encompassed Post-needling pain (VAS), pressure pain threshold (PPT), two-point discrimination threshold (TPDT), and maximum hand grip strength (MHGS). Post-needling pain intensity in the EG showed statistically significant reductions (MD = 0.400, SEM = 0.271, W = 137.00, p = 0.047) following the addition of MT to the DDN protocol. Similarly, PPT exhibited significant improvements (MD = 0.148 Kg/cm2, SEM = 0.271, W = 262.00, p < 0.001). However, TPDT and MHGS did not show significant differences between initial and post-treatment measurements. The addition of MFT to DDN for MTrPS in lateral elbow pain reduced Post-needling pain and influenced on sensory perception in lateral elbow pain patients with Myofascial Trigger Points. Despite observed clinical effects not reaching statistical significance, these findings offer valuable insights for future research considerations.

More than one million curable sexually transmitted infections occur every day. Trichomonas vaginalis is one of the main responsible for these epidemiological data, however, the diagnosis of this protozoan is still mainly based on microscopic and culture identification. The commerciali-zation of immunological tests and the development of molecular techniques have improved the sensitivity of classical methods. Nevertheless, the fact that trichomoniasis is a neglected parasitic infection, hinders the development of novel techniques and their implementation in routine di-agnosis. This review article shows the different methods developed to identify T. vaginalis in population and the difficulties to diagnose male and asymptomatic patients. The importance of including this parasite in routine gynecological screening, especially in pregnant women, and the importance of considering T. vaginalis as an indicator of high-risk sexual behavior is also discussed.

The paper proposes a new implementation of the PID algorithm in digital hardware. The proposed circuit implements an advanced PID formula, containing a non ideal derivative component, and weighting coefficients, which enable reducing influence of setpoint changes in the proportional and derivative components. The implementation operates on standard single precision (32 bit) floating-point numbers. The proposed circuit structure is optimized for cost. It uses just one arithmetic block, performing the multiply-and-add operation. The calculations are carried out in a sequential manner. The circuit was implemented in a Cyclone V FPGA device from Intel, using the Quartus Prime software. Proper operation of the circuit was verified by simulation. The proposed solution is comparable in terms of speed with other hardware implementations of the PID algorithm operating on standard single precision floating-point numbers, while being significantly cheaper. However, it outperforms by several orders of magnitude the speed of any software-based implementation, including solutions using PLCs, and CPU/MCUs. The proposed circuit structure, together with the overall regulator device concept, suit well the SoC (System on Chip), or SoPC (System on Programmable Chip) idea, i. e. a device, that contains a CPU core immersed in “FPGA fabric” - logic resources characteristic for FPGA devices.

Versatility, sensitivity and accuracy have made the real-time polymerase chain reaction (qPCR) a crucial tool for research as well as diagnostic applications. However, for point-of-care (PoC) use traditional qPCR faces two main challenges: long run times mean results are not available for half an hour or more and the requisite high-temperature denaturation requires more robust and pow-er-demanding instrumentation. This study addresses both issues and revised primer and probe designs, modified buffers and low ∆T protocols which, together, speed up qPCR on conventional qPCR instruments and will allow the development of robust, point-of-care devices. Our approach, called "FlashPCR", also allows efficient reverse transcription as part of a one-step RT-qPCR pro-tocol, making it universally applicable for both rapid research and diagnostic applications.

In this paper, a positive answer to the open question of Fabino et al. is given, and the concept of I\c sik type set valued contractions is introduced and fixed point theorem for such contractions is established. Examples to support main theorems are given, and an application to integral inclusion is given.

This study introduces a multilayer perceptron (MLP) error compensation method for real-time camera orientation estimation, leveraging a single vanishing point and road lane lines within a steady-state framework. The research emphasizes cameras with a roll angle of 0°, predominant in autonomous vehicle contexts. The methodology estimates pitch and yaw angles using a single image and integrates two Kalman filter models with inputs from image points (u, v) and derived angles (pitch, yaw). Performance metrics, including AE, MINE, MAXE, SSE, and STDEV, were utilized, testing the system in both simulator and real-vehicle environments. The outcomes indicate that our method notably enhances the accuracy of camera orientation estimations, consistently outpacing competing techniques across varied scenarios. This method’s potency is evident in its adaptability and precision, holding promise for advanced vehicle systems and real-world applications.

In recent years, there has been significant growth in the ubiquity and popularity of three dimensional(3D) point clouds, with an increasing focus on the classification of 3D point clouds. To extract richer features from point clouds, many researchers have turned their attention to various point set regions and channels within irregular point clouds. However, this approach has limited capability in attending to crucial regions of interest in 3D point clouds and may overlook valuable information from neighboring features during feature aggregation. Therefore, this paper proposes a novel 3D point cloud classification method based on global attention and adaptive graph convolution. The method consists of two main branches: the first branch com-putes attention masks for each point, while the second branch employs adaptive graph convolu-tion to extract global features from the point set. It dynamically learns features based on point interactions, generating adaptive kernels to effectively and precisely capture diverse relationships among points from different semantic parts. Experimental results demonstrate that the proposed model achieves 93.8% in overall accuracy and 90.8% in average accuracy on the ModeNet40 dataset.

To solve the problem of complex sensor installation and easy damage in contact displacement measurement, a non-contact measurement method of brace displacement in bridge swivel construction based on binocular vision is proposed in this study. Combined with monitoring data in a swivel construction interchange project, binocular vision system was compared and analyzed with the traditional displacement meter and total station. Results showed that force versus displacement variation plots were obtained by binocular visual measurement in the weighing test, the inflection point can be clearly distinguished, and the position of the inflection point was the same as that of the displacement meter; monitoring data of binocular vision measurement and total station were compared and analyzed in the bridge swivel process, the average error was no more than 0.18 mm, the maximum error was no more than 0.42 mm, and the standard deviation was no more than 0.12. The method proposed in this study can be used as an alternative to displacement meter and total station measurement methods in bridge swivel construction, the problem of complex sensor installation and easy damage is solved in brace displacement measurement, equipment and labor costs can be effectively saved.

Background Ultrasonographic measurement of the optic nerve sheath diameter (ONSD) is helpful in the assessment of intracranial pressure. The aim of this study was to determine whether the Trendelenburg position during laparoscopic urological surgery changed the ONSD and whether changes correlated with postoperative complications. Methods In this prospective study, we measured ONSD before patients were placed in the Trendelenburg position. Then the Trendelenburg position was established by tilting the operating table to 20-25 degrees. After surgery, the patients were placed in a horizontal position, and the second measurement of ONSD was obtained. Results The study included 69 patients. The average preoperative ONSD in the right eye was 5.8 ± 0.7 mm and 5.8 ± 0.8 mm in the left eye. The average postoperative ONSD in the right eye was 6.6 ± 0.8 mm and 6.6 ± 0.7 mm in the left eye. The differences between postoperative and preoperative values in the right and left eyes were statistically significant (p <0.000001). ONSD increases above the norm did not correlate with the incidence of postoperative nausea (p = 0.94), delirium (p = 0.81), or the time to patient awakening (p = 0.29). Conclusion ONSD increased in patients who underwent surgical procedures performed in the Trendelenburg position, but the increase did not correlate with postoperative complications.

With the rise of the Internet of Things (IOT), mobile devices and Location-Based Social Network (LBSN), an abundant amount of trajectory data has made research on location prediction more popular. The check-in data shared through LBSN hides information related to life patterns, obtaining this information is helpful for location prediction. However, the trajectory data recorded by mobile devices is different from check-in data that has semantic information. In order to obtain the user’s semantic, relevant studies match the stay point to the nearest Point of Interest (POI), but location error may lead to wrong semantic matching. Therefore, we propose A Self-Attention for Next Location Prediction based on Semantic Mining to predict the next location. When calculating the semantic feature of a stay point, the first step is to search for the k nearest POI, then use the reciprocal of the distance from the stay point to the k nearest POI and the number of categories as weights. Finally, we use the probability to express semantic without losing other important semantic information. Furthermore, this research combined with sequential pattern mining can bring richer semantic features. In order to better perceive the trajectory, temporal features learn periodicity of time series by sine function. In terms of location features, we build a directed weighted graph and regard the frequency of users visiting locations as the weight, so the location features are rich in contextual information. We then adopt the Self-Attention model to capture long-term dependencies in long trajectory sequences. Experiments in Geolife show that the semantic matching of this study improved by 45.78% in TOP@1 compared with the closest distance search for POI. Compared with the baseline, the model proposed in this study improved by 2.5% in TOP@1.

We develop a quantitative microscopic theory of decaying Turbulence by studying the dimensional reduction of the Navier-Stokes loop equation for the velocity circulation. We have found an infinite dimensional manifold of solutions of the Navier-Stokes loop equation\cite{M93, M23PR} for the Wilson loop in decaying Turbulence in arbitrary dimension $d >2$. This family of solutions corresponds to a fractal curve in complex space $\mathbb C^d$, described by an algebraic equation between consecutive positions plus a nonlinear periodicity condition. We derive the constrained SDE for the evolution of the fractal curve at a fixed moment of physical time as a function of an auxiliary stochastic time. We expect this stochastic process to cover our fixed manifold of the solutions of the decaying Turbulence. The energy density of the fluid decays as $\mathcal E_0/t$, where $\mathcal E_0$ is an initial dissipation rate. Presumably, we have found a new phase of extreme Turbulence yet to be observed in real or numerical experiments.

Inflammatory bowel disease (IBD), comprising Crohn's disease (CD) and ulcerative colitis (UC), defines as an idiopathic, chronic, relapsing, inflammatory disease affecting the gastrointestinal tract and leading to chronic damage. Endoscopy with biopsies is considered the gold standard for IBD diagnosis, whereas magnetic resonance (MRI) for CD extension and complication assess-ment. However, the latter are invasive procedures; thus, the need for a reliable, accessible and noninvasive way to perform IBD diagnosis and monitoring in the tight control era, like intestinal ultrasound (IUS) is. Compared to endoscopy and MRI, IUS has shown reliable diagnostic accuracy in assessing CD and UC severity and extension. Performing IUS in a point-of-care setting (POCIUS) can guide the clinician in driving the diagnostic and therapeutic pathway, thus accel-erating clinical decisions. POCIUS performed with pocket devices can represent the future of physical examination in outpatient or inpatient examination. Accordingly, we performed a liter-ature review about the application of IUS in CD and UC diagnosis. Furthermore, we explored the technical aspects of this imaging technique and its application in a point-of-care setting.

In this paper, we prove some common fixed point theorems on complex partial metric space. The presented results gener- alize and expand some of the literature well-known results. We also explore some of the application of our key results.

This article has two objectives. Firstly, we will use the vector variational-like inequalities problems to achieve local approximate (weakly) efficient solutions of Vector Optimization Problem within the novel field of the Hadamard manifolds. Previously, we will introduce the concepts of generalized approximate geodesic convex functions and illustrate them with examples. We will see the minimum requirements under which critical points, solutions of Stampacchia and Minty weak variational-like inequalities and local approximate weakly efficient solutions can be identified, extending previous results from the literature for linear Euclidean spaces. Secondly, we will show an economical application, using again solutions of the variational problems to identify with Stackelberg equilibrium points on Hadamard manifolds and under geodesic convexity assumptions.

A run-of-the-mill remote sensor arrange comprises numerous vitality compelled sensor hubs that are arbitrarily sent is the sensor field. Vitality is one of the most significant parts of planning an information dispersal convention for applications, for example, war zone checking, living space observing, and so on. We present EGDD, an Energy-effective Grid-based Data Dissemination plot for arbitrarily conveyed remote sensor systems. The proposed conspire is vitality effective for dealing with both sink and source portability. EGDD depends on a virtual framework-based foundation for information scattering from various versatile sources to different portable sinks. The virtual lattice of square size is built by the main source showing up in the sensor field dependent on the remaining vitality of the sensor hubs. Moreover, we proposed an askew sending calculation for inquiry and information sending which guarantees that just a single spread hub advances the question and information at once. In EGDD, substitute scattering hubs are chosen ahead of time during the lattice development procedure and the least limit vitality level is characterized for spread hubs. When the vitality of a dispersal hub arrives at the base edge esteem, it is supplanted by another spread hub. The reenactment results show that the proposed EGDD conspire is more vitality proficient when contrasted with other information scattering conventions.

In this study, we investigate the form of solutions, stability character and asymptotic behavior of the following four rational difference equations x_{n+1} = (1/(x_{n}(x_{n-1}±1)±1)), x_{n+1} = ((-1)/(x_{n}(x_{n-1}±1)∓1)), such that their solutions are associated with Tribonacci numbers.

In the framework of a multiplicative metric space. We have discuss some Properties of convex structures in pseudo multiplicative metric space and have applied these properties toiobtain alfixed point results in complete pseudo. It would be interesting to prove some further results in such metric spaces with completeness property.

A wealth of Full Waveform (FW) LiDAR data are available to the public from different sources, which is poised to boost the extensive application of FW LiDAR data. However, we lack a handy and open source tool that can be used by potential users for processing and analyzing FW LiDAR data. To this end, we introduce waveformlidar, an R package dedicated to FW LiDAR processing, analysis and visualization as a solution to the constraint. Specifically, this package provides several commonly used waveform processing methods such as Gaussian, adaptive Gaussian and Weibull decompositions, and deconvolution approaches (Gold and Richard-Lucy (RL)) with users’ customized settings. In addition, we also developed functions to derive commonly used waveform metrics for characterizing vegetation structure. Moreover, a new way to directly visualize FW LiDAR data is developed through converting waveforms into points to form the Hyper Point cloud (HPC), which can be easily adopted and subsequently analyzed with existing discrete-return LiDAR processing tools such as LAStools and FUSION. Basic explorations of the HPC such as 3D voxelization of the HPC and conversion from original waveforms to composite waveforms are also available in this package. All of these functions are developed based on small-footprint FW LiDAR data, but they can be easily transplanted to the large footprint FW LiDAR data such as Geoscience Laser Altimeter System (GLAS) and Global Ecosystem Dynamics Investigation (GEDI) data analysis. It is anticipated that these functions will facilitate the widespread use of FW LiDAR and be beneficial for better estimating biomass and characterizing vegetation structure at various scales. The package and code examples can be found at https://github.com/tankwin08/waveformlidar.

To improve the effect of multi-point stretch forming of sheet metal, it is proposed in this paper to replace fixed ball head with swinging ball head. According to the multi-point dies with different arrangements, this research establishes the finite element models of the following stretch forming, i.e. fixed ball heads with conventional arrangement, swinging ball heads with conventional arrangement, swinging ball heads with declining staggered arrangement, and swinging ball heads with parallel staggered arrangement and then numerical simulation is performed. The simulation results show that by replacing fixed ball head with swinging ball head, the surface indentation of the formed part was effectively suppressed, the stress and tension strain distribution of the formed part was improved and the forming quality was improved; that the thickness of the elastic pad was reduced, the springback was reduced and the forming accuracy was improved; and that when the ball head was applied to multi-point die with staggered arrangement, better forming result was achieved, where the best forming result was achieved in combining the swinging ball heads with the multi-point die with parallel staggered arrangement. The forming experiments were carried out, and the experimental results were consistent with the trend of numerical simulation results, which verified the correctness of the numerical simulation.

Despite increased awareness of and attention to the need for sustainable agriculture, fertilizers and compost application in excess of crop requirements remain common agricultural practices in South Korea, causing eutrophication of freshwater and coastal ecosystems. In this study, a phosphorus (P) budget was developed to quantify P inputs, outputs, and retention in a forested- agricultural watershed. The P budget showed that chemical fertilizers and organic compost were the largest source of P (97.6% of the total) followed by atmospheric deposition (2.1% of the total P), whereas forest export (0.2% of the total) and sewage treatment plants (STPs) (0.1% of the total) were negligible. The dominant P outputs were crop harvesting and hydrologic export to surface water. The P balance showed a significant accumulation of P in the watershed; approximately 87% of the total P input was retained in the soils within the watershed. However, P concentrations in drainage water were still high enough to cause eutrophication of downstream reservoirs. The results provide useful information on the proportion of P export and retention in soils and will help support efforts to improve water quality and design better management of agricultural non-point source pollution.

Model-based design has received considerable attention in biological and chemical industries over the last two decades. However, the parameter uncertainties of first-principle models are critical in model-based design and have led to the development of robustification concepts. Various strategies were introduced to solve the robust optimization problem. Most approaches suffer from either unreasonable computational expense or low approximation accuracy. Moreover, they are not rigorous and do not consider robust optimization problems where parameter correlation and equality constraints exist. In this work, we propose a highly efficient framework for solving robust optimization problems with the so-called point estimation method (PEM). The PEM has a fair trade-off between computation expense and approximation accuracy and can be easily extended to problems of parameter correlations. From a statistical point of view, moment-based methods are used to approximate robust inequality and equality constraints. We also suggest employing the information from global sensitivity analysis to further simplify robust optimization problems with a large number of uncertain parameters. We demonstrate the performance of the proposed framework with two case studies where one is to design a heating/cooling profile for the essential part of a continuous production process and the other is to optimize the feeding profile for a fed-batch reactor of the penicillin fermentation process. The results reveal that the proposed approach can be used successfully for complex (bio)chemical problems in model-based design.

Since the systematic evolution of ligands by exponential enrichment (SELEX) method was developed, aptamers have made significant contributions as bio-recognition sensors. Microdevice systems allow for low reagent consumption, high-throughput of samples, and disposability. Due to these advantages, there has been an increasing demand to develop microfluidic-based aptasensors for analytical technique applications. This review introduces the principal concepts of aptasensors and then presents some advanced applications of microdevice-based aptasensors on several platforms. Highly sensitive detection techniques such as electrochemical and optical detection have been integrated into lab-on-a-chip devices and researchers have moved towards the goal of establishing point-of-care diagnoses for target analyses.

In our previous works we have proposed design equations that can predict with reasonable accuracy the transition point from homogeneous to heterogeneous regime as well as the gas holdup and the mean Sauter diameter at the homogeneous regime. The validity of the proposed correlations was checked with data obtained using different geometrical configurations and several Newtonian and non-Newtonian liquids as well as the addition of surfactants. However, in all the experiments the gas phase was atmospheric air. This work investigates the effect of gas phase properties by conducting experiments employing various gases (i.e., air, CO₂, He) that cover a wide range of physical property values. Experiments revealed that only the use of low-density gas (He) has a measurable effect on bubble column performance. More precisely, when the low-density gas (He) is employed, the transition point shifts to higher gas flow rates and the gas holdup decreases, a fact attributed to the lower momentum force exerted by the gas. In view of the new data, the proposed correlations have been slightly modified to include the effect of gas phase properties and it is found that they can predict the aforementioned quantities with an accuracy of ±15%. It has been also proved that CFD simulations are an accurate means for assessing the flow characteristics inside a bubble column.

In the last two centuries, land use change (LUC) has been the most important direct changes driver for terrestrial ecosystems. To contrast the consequent ecosystems degradation, forward-looking spatial policies and target landscape and land-use planning processes, promoting a sustainable land use change, are needed. The present paper proposes a framework of action including different landscape planning and ecological approaches: from the spatial modelling to recognize the LUC and build different scenarios, to the ecosystem services (ESs) assessment to evaluate the possible environmental impacts. Three different scenarios were built: Trend, No-Tillage and Energy crops. The Sediment Delivery Ratio and Carbon Storage and Sequestration ESs were assessed and compared for each scenario. The aim of the paper is to support decision-makers and local communities into the landscape planning process. Results show that a regional development in line with past trend could lead to further land degradation. Instead, the two scenarios proposed in compliance with EU policies, could bring benefits only if related to moderate LUCs and respecting the naturally grass-vegetated land. From the local to global scale, a guided and shared LUC management allows implementing sustainable development, basing on a deep knowledge of physical-environmental but also social and economic issues.

Natural ecosystem of Islands and coastal region are vulnerable to climate change phenomena such as increasing temperature, fluctuating rainfalls, ocean acidification and tsunami. Andaman and Nicobar group of islands lies in Bay of Bangal facing such extreme climate phenomena. A spatial-temporal analysis of forest cover of middle Andaman region of the Andaman and Nicobar group of islands was done from 1990 to 2019 with an interval of 5-10 years. Support vector machine classifier, spectral indices such as Normalized Difference Vegetation Index, Normalized Difference Water Index, and Normalized Difference Built-up Index were used for the analysis of greenery, water resources, and urban land. Land surface temperature was estimated using split window algorithm for Landsat 8 and mono window algorithm for Landsat 5. The data showed relative contribution of forest region toward rising temperature in the island region. The research also showed that subsurface hydrology linked to interconnected lineaments provides a stable zone for forest cover. The open forest showed maximum fluctuation while minimum change was observed in Evergreen Forest. The spectral characteristics analysis using indices showed significant change except in 2005 due to Tsunami occurred in 2005. The land surface temperature showed fluctuation near to 30° C from 1990 to 2019.

The practice of nurse health coaching (NHC) draws from the art and science of nursing, behavioral sciences, and evidence-based health coaching methods. This secondary analysis of the audio-recorded natural language of participants during NHC sessions of our recent 8-week RCT evaluates improvement over time in cognitive-behavioral outcomes: Change Talk, Resiliency, Self-Efficacy/Independent Agency, Insight & Pattern Recognition, and Building Towards Sustainability. We developed a measurement tool for coding, Indicators of Health Behavior Change (IHBC), that was designed to allow trained health coach experts to assess the presence and frequency of the indicators in the natural language content of participants. We used a two-step method for randomly selecting the 20-minute audio-recorded session that was analyzed at each time point. Fifty-six participants had high-quality audio recordings of the NHC sessions. Twelve participants were placed in the social determinants of health (SDH) group based on the following: low income (<$20,000/year), early-onset hypertension, and social disadvantages. Our analyses significantly improved Change Talk and the other four factors over time. Our factor analyses indicated two distinct factors at each measurement point of the study, demonstrating the stability of the outcome measures over time. Our newly developed measurement tool, IHBC, proved stable in structure over time and sensitive to change. This NHC program shows promise in improving cognitive-behavioral indicators associated with health behavior change in both non-SDH and SDH individuals.

Aim: The main purpose of this feasibility study was to estimate compliance and acceptability rate of a 9-Steps mobile app preparation program. Subsequently, to assess its impact regarding attitudes towards smoking cessation. Methods: The program was only available on versions above iOS 13.3. The ecological study collected user’s data via the app from 04/07/2021 to 28/07/2021. Results: A total of 2331 ecological users completed onboarding; 1926 users (73.9%) completed the step 0 and only 265 users continued in step 1. On average, participants actively engaged with intra-steps activities (85,1%). Most users were highly satisfied at the end of each step. On average 86% found the content of each step comprehensive and relevant. Mann-Whitney tests demonstrated positive changes in attitudes toward smoking cessation on the less confident users: willing (3 to 5, p <.05); confidence (3 to 5, p <.001) and readiness to quit (3 to 5, p <.001). Conclusions: This ecological study corroborates the expected dropout between first use and regular use of health mobile apps. However, engagement and satisfaction rates support the feasibility and acceptability of a 9-step preparation program. Additional research is needed to better understand determinants of regular use of mobile apps and its impact on the target behavior.

Climate change, biodiversity loss, and other social and environmental problems pose grave risks. Progress so far has been incremental and insufficient, and as a result scientists, global policy experts, and the general public increasingly conclude that bold change is required across all sectors of society. At least two kinds of bold change are conceivable: reform of existing societal systems (e.g., financial, economic, legal, and governance systems), including their institutions, policies, rules, and priorities; and transformation, understood as the de novo development of and migration to new, improved systems. This paper is the second in a series of three that together propose a novel science-driven research and development program aimed at societal transformation. Moreover, the series advances a conceptual framework and formal mechanics by which societal transformation might be approached. Two of the underlying hypotheses are that new societal systems can be developed in a science-driven process to be fit for purpose, and system fitness can be compared across designs. Societies are viewed as superorganisms, and systems are viewed as a societal cognitive architecture. The first paper in the series provides definitions, aims, hypotheses, and a worldview. This paper discusses motivations, the role of science in societal transformation, a theory of change, and fitness metrics. The proposed R&amp;D program and theory of change are sound, viable, and affordable. The local-global-viral strategy invites the global science community to play a unique co-leadership role with local communities in the development, testing, and monitoring of new societal systems. Systems are implemented via a novel civic club model, where participation is voluntary. Clubs grow and replicate based on merit and aided by club networks, whose systems are also viewed as societal cognitive architectures. Benefits of the program and strategy are discussed.

Abstract: Changes in forest landscapes have been connected with human activity for centuries, which can be considered as one of the main driving forces of change in the global perspective. The spatial distribution of forests changes along with the geopolitical situation, demographic changes, intensification of agriculture, urbanization or changes in the land use policy. However, due to the limited availability of historical data, the driving forces of changes in forest landscapes are most often considered in relation to recent decades, without taking into account long-term analyzes. The aim of this paper is to determine the impact of natural and socio-economic factors on changes in forest landscapes within the protected area – Ślęża Landscape Park and its buffer zone in the aspect of long-term analyzes covering the period of 140 years (1883-2013). The comparison of historical and current maps, demographic data on 4 different periods as well as natural and location factors by using the ArcGIS software allowed analyzing selected driving forces of forest landscape transformations. We took into account natural factors like altitude, slope, exposure of the hillside and socio-economic drivers like population changes, distances to centers of municipalities, main roads and built-up areas.

Accurate clinical diagnosis of patients presenting to primary care settings with acute sore throat remains challenging, often resulting in the over-prescribing of antibiotics. Using point-of-care tests (POCTs) to differentiate between respiratory infections is well-accepted, yet evidence on the application within primary care is sparse. We assessed the application of testing patients (n=160) from three family practices with suspected Streptococcal infections using rapid molecular tests (ID NOW Strep A2, Abbott). In addition to comparing clinical evaluation and prescription rates with either usual care or with testing, patients and staff completed a questionnaire about their experience of molecular POCT in primary care. The immediate availability of the result was important to patients (100%) and staff (≈90%) stated that molecular testing improved quality of care. Interestingly, only 22.73% of patients with a Centor score >2 tested positive for Strep A and overall, less than 50% of Centor scores 3 and 4 tested positive for Strep A with the ID NOW testing platform. The addition of rapid molecular POCTs to clinical assessment resulted in a 55- 65% reduction in immediate and deferred antibiotic prescriptions. The intervention was popular with patients and medical staff but was associated with increased cost and a longer appointment length.

This paper introduces a novel method for accurately calculating the upper biomass of single trees using Light Detection And Ranging (LiDAR) point cloud data. The proposed algorithm involves classifying the tree point cloud into two distinct ones: the trunk point cloud and the crown point cloud. Each part is then processed using specific techniques to create a 3D model and determine its volume. The trunk point cloud is segmented based on individual stems, with each stem further divided into slices that are modeled as cylinders. On the other hand, the crown point cloud is analyzed by calculating its footprint and gravity center. The footprint is further divided into angular sectors, with each being used to create a rotating surface around the vertical line passing through the gravity center. All models are represented in a matrix format, simplifying the process of minimizing and calculating the tree’s upper biomass, consisting of crown biomass and trunk biomass. To validate the proposed approach, both terrestrial and airborne datasets are utilized. A comparison with existing algorithms in the literature confirms the effectiveness of the new method. The study shows that the proposed algorithm achieves an average fit between 0.01 m and 0.49 m for individual trees.

This research focuses on the Hopf bifurcation occurring at a singular point with high-order degeneracy in a class of three-dimensional systems. Based on center manifold theorem, by expanding the technique for determining singular point values of degenerate singularities in two-dimensional systems, the formal series method to determine the singular point values at the high-order degenerate critical point is discussed. Furthermore, a class of specific three-dimensional differential systems with high-order degenerate singularities is explored. By computing the singular point values and determining center conditions, we proved that a minimum of 5 small-amplitude limit cycles in the vicinity of the origin. This research provides new perspectives on the center problem and limit cycle bifurcation in high-dimensional systems with high-order degenerate singular points.

Interactions between mobile robots and human operators in common areas require a high safety especially in terms of trajectory planning, obstacle avoidance and mutual cooperation. In this connection the crossings of planned trajectories, their uncertainty based on model fluctuations, system noise and sensor noise,play an outstanding role. This paper discusses the calculation of expected areas of interactions du ring human-robot navigation with respect to fuzzy and noisy information. Expected crossing points of possible trajectories are nonlinearily associated with positions and orientations of robot and human. The nonlinear transformation of a noisy system input, such as directions of motion of human and robot, to a system output, the expected area of intersection of their trajectories, is done by two methods: statistical linearization and the sigma-point-transformation. For both approaches fuzzy approximations are presented and the inverse problem is discussed where the input distribution parameters are computed from given output distribution parameters.

Point defects induced by doping rare earth elements RE (Nd, Er) into the magnesium oxide host were investigated by classical atomistic simulations utilising the General Utility Lattice Program (GULP). Formation and association energies were calculated for the potential defect structures. Both isolated defects and defect complexes were considered. The most energetically favourable structures of defect complexes were found for rare earth doped and Li co-doped systems. The correlation between the association energy and the structure of the defect complex was investigated. The influences of Li were revealed with respect to energy and structure. The simulation results contribute to the understanding of the point defects of doped MgO and how Li influences the doping of rare earth elements in the MgO host.

Accurate classification of objects in 3D point clouds is a significant problem in several applications, such as autonomous navigation and augmented/virtual reality scenarios, which has become a research hot spot. In this paper, we presented a deep learning strategy for 3D object classification in augmented reality. The proposed approach is a combination of the GRU and LSTM. LSTM networks learn longer dependencies well, but due to the number of gates, it takes longer to train; on the other hand, GRU networks have a weaker performance than LSTM, but their training speed is much higher than GRU, which is The speed is due to its fewer gates. The proposed approach used the combination of speed and accuracy of these two networks. The proposed approach achieved an accuracy of 0.99 in the 4,499,0641 points dataset, which includes eight classes (unlabeled, man-made terrain, natural terrain, high vegetation, low vegetation, buildings, hardscape, scanning artifacts, cars). Meanwhile, the traditional machine learning approaches could achieve a maximum accuracy of 0.9489 in the best case.

We investigated the development of a simple and sensitive assay for the identification of minute amounts of animal and human biological material. The suggested system uses isothermal amplification of DNA in a rapid assay format, which returns the results in as little as 40 minutes from sampling. The assay used for the proof of concept employs the novel handheld SaLux19 device (Max-Planck Innovation prototype, Germany). This well-established infield detection system could also be utilized for forensic scenarios. The results presented here demonstrated that the assay is sufficiently specific and sensitive and can detect the presence of Sus scrofa nucleic acids.

Precise individual tree or sample-based inventories derived from 3D point cloud data of mobile laser scanning can improve our comprehensive understanding of the structure, function, resilience, biodiversity, and ecosystem services of urban forests. This study assessed the performance of a hand-held laser scanning system for the extraction of tree position, diameter at breast height (DBH) and tree height (H) in an urban area. A total of 2083 trees of 13 species from 34 plots were analyzed. The results showed that the registration of tree positions using ground control points (GCPs) demonstrated high accuracy, with errors consistently below 0.4 m, except for a few instances. The extraction accuracy of DBH for all trees and individual species remained consistently high, with a total root mean square error (RMSE) of 2.06 cm (6.89%) and a bias of 0.62 cm (2.07%). Notably, broad-leaved trees outperformed coniferous trees, with RMSE and bias values of 1.86 cm (6%) and 0.76 cm (2.46%) compared to 2.54 cm (9.46%) and 0.23 cm (0.84%). Tree height extraction accuracy varied significantly among different species, with R2 values ranging from 0.65 to 0.92. Generally, both DBH and height were underestimated. Linear mixed effects models (LME) were applied to evaluate factors affecting the performance of HLS with the plot as a random factor. LME analysis revealed that plant type and terrain significantly influenced the accuracy of DBH and H derived from HLS data. Other fixed factors of plot area, tree density and trajectory length didn’t have significance. With a large sample size, we concluded that the HLS demonstrated sufficient accuracy in extracting individual tree parameters in urban forests.

The most commonly used real-time augmentation services in China are International GNSS Service (IGS) real-time service, PPP-B2b service, and BeiDou Satellite-Based Augmentation System (BDSBAS) dual-frequency augmentation service. However, the research on the performance evaluation, comparison and application scope of these three products is still unknown and unrevealed. This article introduces methods for obtaining real-time augmentation information and real-time orbit and clock offset recovery. Based on real-time orbit and clock offset accuracy, positioning accuracy, and positioning availability, it systematically evaluates the performance of CNES, PPP-B2b, and BDSBAS augmentation information. The results indicate that the radial accuracy of CNES and PPP-B2b real-time orbit products is consistent, and the Root Mean Square (RMS) is better than 5 cm. CNES can achieve centimeter-level accuracy in both along-track and cross-track components, surpassing the decimeter-level accuracy of PPP-B2b. Both services demonstrate consistent accuracy in real-time clock offset, with PPP-B2b showing similar standard deviations (STD) of 0.16 ns for different satellites. However, for CNES, the STD of real-time clock offset varies for GPS, BDS-3 MEO, and BDS-3 IGSO satellites, with values of 0.10 ns, 0.19 ns, and 0.60 ns, respectively. The accuracy and availability of the two PPP services exhibit the same levels, with centimeter-level accuracy achieved after convergence and positioning availability exceeding 99%. Therefore, the difference between the two services in application areas depends on the acquisition of augmentation information. However, BDSBAS, which concentrates on code observations, demonstrates lower accuracy in real-time orbit and clock offset, positioning accuracy, and positioning availability compared to the other two services. Its primary application is in the aviation and maritime domains, where there is a greater need for service integrity, continuity, and reliability.

Rational delineation of urban–rural boundaries is a foundational prerequisite for holistic urban and rural development planning and rational resource allocation. However, the results of division of urban–rural boundaries extracted using a single data source are non-comprehensive. To address this problem, the present study proposes a method for using multiple sources such as population data, nighttime light data, land use, and points of interest (POI) data to extract urban–rural boundaries. Considering Guizhou Province for a case study, we here present a two-step method for identifying urban–rural boundaries. First, the random forest model was combined with the dasymetric mapping method to obtain the population spatialization data with a 30-m resolution in the studied province. Second, using the breaking point method, we extracted the urban–rural boundary for Guizhou Province in 2020 based on the spatialized population. This method fully integrated the benefits of various data and judiciously extracted the boundaries of the main urban areas and small- and medium-sized towns of each city in the study province at the same spatial scale. The stratified random sampling method revealed that the average overall accuracy was 88.05%. The method proposed has certain universality and application value and allows identifying the urban–rural boundaries more accurately and practically.

The management and classification of solid waste is one of the most important challenges around the world, in order to sustain economic growth and preserve the environment. The objective is to propose the use of Smart Ecological Points as a strategy to address the problem related to the solid waste management system at the source, which has become one of the biggest problems globally and Colombia is no exception. The article describes the current state of the problem in the country and in turn, presents the possibility of developing a prototype corresponding to a low-cost Smart Ecological Point supported by the use of an experimental capacitive sensor and Machine Learning algorithms, which will reduce the time necessary for the classification of recyclable and non recyclable waste, minimizing the health risks and increasing the percentage of waste that can be reused, by reducing the probability of being contaminated at the source, an aspect that is very common when done manually. According to the results obtained, it was evident that the proposed prototype made an adequate classification of waste, generating the possibility of being manufactured with existing technology in the environment, in order to promote adequate waste classification at the source.

Although relatively rare, affecting 8% of the general population, autoimmune disorders are causative linked with chronic diseases and morbidity. Control of the course of the disease is closely dependent on the ability to monitor its onset as well as response to treatment. In the present report, we review the progress in the development of biosensor-based approaches and related tools for the Point-of-Care diagnosis and monitoring of biomarkers related to several autoimmune diseases, such as Myasthenia Gravis, Rheumatoid Arthritis, Multiple Sclerosis, Systemic Erythematosus Lupus, Crohn’s Disease, Diabetes Mellitus, Behcet’s disease, Psoriasis and Celiac Disease. Various biosensing technologies are discussed, including electrochemical, optical and mechanical ones, along with the use of advanced nanomaterials and immobilization techniques for the biorecognition elements. The need for innovative devices with unique features of rapid, low-cost, real-time detection is considered in the context of preventing permanent organ and tissue damage from chronic autoimmune diseases.

High-precision ground point cloud data has a wide range of applications in various fields, and the separation of ground points from non-ground points is a crucial preprocessing step. Therefore, designing an efficient, accurate, and stable ground extraction algorithm is of great significance for improving the processing efficiency and analysis accuracy of point cloud data. The study area in this article was a Park in Guilin, Guangxi, China. The point cloud was obtained by utilizing the UAV platform. In order to improve the stability and accuracy of the Filter algorithm, this article proposed a triangular grid filter based on Slope Filter, found violation points by the spatial position relationship within each point in the triangulation network, improved KD-Tree-Based Euclidean Clustering, and applied it to the non-ground points extraction, this method has good accuracy, stability and achieves good results in separating ground points from non-ground points. At first, using Slope Filter to remove some non-ground points, to reduce the error of taking ground points as non-ground points; Secondly, established a triangular grid based on the triangular relationship between each point, the violation-triangle can determin through the grid, and then the corresponding violation points were found in the violation-triangle; Thirdly, according to the three-point collinear method to extract the regular points, used these points to extract the regular landmarks by KD-Tree-Based Euclidean Clustering and Convex Hull Algorithm; Finally, removed disperse points and irregular landmarks by Clustering Algorithm. In order to confirm the superiority of this algorithm, this article compared the filter effects of various algorithms on the study area and filtered the 15 sample data provided by ISPRS, and obtained an average error of 3. 46%. The results showed that the algorithm in this article have a high processing efficiency and accuracy, which can greatly improve the processing efficiency of point cloud data in practical applications.

3D point cloud classification tasks have been a hot topic in recent years. Most existing point cloud processing frameworks lack context-aware features due to the deficiency of sufficient local feature extraction information. Therefore, we design an augmented sampling and grouping (ASG) module to efficiently obtain fine-grained features from the original point cloud. In particular, this method strengthens the domain near each centroid and makes reasonable use of the local mean and global standard deviation to mine point cloud’s local and global features. In addition to this, inspired by the transformer structure UFO-ViT in 2D vision tasks, we first try to use a linearly-normalized attention mechanism in point cloud processing tasks, investigating a novel transformer-based point cloud classification architecture UFO-Net. An effective local feature learning module is adopted as a bridging technique to connect different feature extraction modules. Importantly, UFO-Net employs multiple stacked blocks to better capture feature representation of the point cloud. Extensive ablation experiments on public datasets show that our method outperforms other state-of-the-art methods. For instance, our network performed with 93.7% overall accuracy on the ModelNet40 dataset, which was 0.5% higher than PCT. Our network also archived 83.8% overall accuracy on the ScanObjectNN dataset, which is 3.8% better than PCT.

The paper's main goal is to introduce a novel type of interpolative convex contraction and build up some fresh findings for it using the interpolative convex contractions' progressive approach. We have established certain conclusions using orbitally S-complete and Suzuki type contractions in F-metric spaces. My research aims to examine the fixed point method's efficacy in solving fractional differential equation with boundary conditions.

Spatial approach based on the deformation measurement of volcanic dome and crater rim is key to evaluate the activity of a volcano, such as Merapi volcano where associated disaster risk is regularly taking lives. Within this framework, this study aime to detect localized deformation and change in the summit area that has occurred concomitantly with the dome growth and explosion reported. The methodology was focused on two sets of data, one LiDAR-based dataset of 2012 and one UAV-dataset of 2014. The results show that during the period 2012-2014, the crater walls are 100 m to 120 m high above the crater floor at its maximum (North to East-South-East sector), while the West and North sector presents a topographic range of 40 to 80 m. During the period 2012 – 2014, the evolution of the crater rim around the dome is generally stable (no large collapse). The opening of a new vent on the surface of the dome has displaced an equivalent volume of 2.04 E+04 m3 corresponding to a maximum -9 m (+/- 0.9 m) vertically. This concludes that during the period 2012 – 2014 when the dome of Merapi experienced phreatic or phreatomagmatic explosions, the topography around the dome rose. This rise does not seem to be related to large wall collapses, and it is likely that modification in the subsurface have triggered those changes.

Accumulated data show the utility of diagnostic multi-organ point-of-care ultrasound (PoCUS) in the assessment of patients admitted to an internal medicine ward. Assess whether multi-organ PoCUS (lung, cardiac, and abdomen) provides relevant diagnostic and/or therapeutic information in patients admitted for any reason to an internal medicine ward. Prospective, observational, and single-center study, at a secondary hospital. Multi-organ PoCUS was performed during the first 24 hours of admission. The sonographer had access to the patients’ medical history, physical examination, and basic complementary tests performed in the ED (laboratory, X-ray, electrocardiogram). We considered a relevant ultrasound finding if it implied a significant diagnostic and/or therapeutic change. In the second semester of 2019, 310 patients were enrolled (48.7% men, mean age 70.5 years). Relevant ultrasound findings were detected in 86 patients (27.7%) and in 60 (19.3%) triggered a therapeutic change. These findings were associated with older age (Mantel-Haenszel 2 = 25.6; p&lt; .001) and higher degree of dependency (Mantel Haenszel 2 = 5.7; p = .017). Multi-organ PoCUS provides relevant diagnostic information, complementing traditional physical exam, and facilitates therapy adjustment, regardless of the cause of admission. Multi-organ PoCUS to be useful need to be systematically integrated into the decision-making process in internal medicine.

The ACC feature when activated augments the engine performance in real-time. This article presents a novel methodology to predict the optimal adaptive cruise control set speed profile (ACCSSP) by considering all the effecting parameters. This paper investigates engine operating conditions (EOC) criteria to develop a predictive model of ACCSSP in real-time. We developed a deep learning (DL) model using the NARX method to predict engine operating point (EOP) mapping the vehicle-level vectors (VLV). We used real-world field data obtained from Cadillac test vehicles driven by activating the ACC feature for developing the DL model. We used a realistic set of assumptions to estimate the VLV for the future time steps for the range of allowable speed values and applied them at the input of the developed DL model to generate multiple sets of EOP’s. We imposed the defined EOC criteria on these EOPs, and the top three modes of speeds satisfying all the requirements are derived for each second. Thus three eligible speed values are estimated for each second, and an additional criterion is defined to generate a unique ACCSSP for future time steps. Performance comparison between predicted and constant ACCSSPs indicates that the predictive model outperforms constant ACCSSP.

General relativity is a theory for gravitation based on Riemannian geometry, difficult to compatibilize with quantum mechanics. This is evident in relativistic problems in which quantum effects cannot be discarded. For example in quantum gravity, gravitation of zero-point energy or events close to a black hole singularity. Here, we set up a mathematical model to select general relativity geodesics according to compatibility with the uncertainty principle. To achieve this, we derived a geometric expression of the uncertainty principle (GeUP). This formulation identified proper space-time length with Planck length by a geodesic-derived scalar. GeUP imposed a minimum allowed value for the interval of proper space-time which depended on the particular space-time geometry. GeUP forced the introduction of a “zero-point” curvature perturbation over flat Minkowski space, caused exclusively by quantum uncertainty but not to gravitation. When applied to the Schwarzschild metric and choosing radial-dependent geodesics, our mathematical model identified a particle exclusion zone close to the singularity, similar to calculations by loop quantum gravity. For a 2 black hole merger, this exclusion zone was shown to have a radius that cannot go below a value proportional to the energy/mass of the incoming black hole multiplied by Planck length.

In this paper, by using the variational method, a sufficient condition for the unique existence of the stationary solution of the reaction-diffusion ecosystem is obtained, which directly leads to the global asymptotic stability of the unique equilibrium point. Besides, employing impulse control technique derives the globally exponential stability criterion of delayed feedback ecosystem.And numerical examples illuminate the effectiveness of impulse control, which has a certain enlightening effect on the actual epidemic prevention work . That is, in the face of the epidemic situation, taking a certain frequency of positive and effective epidemic prevention measures is conducive to the stability and control of the epidemic situation. particularly, the newly-obtained theorems quantifies this feasible step.

This paper introduces a method for tunnel point cloud and BIM model integration and cross-section monitoring, providing information to analyse tunnel cross-sections and surrounding rock deformation, and support for tunnel maintenance and reconstruction. Three types of data are processed for the integration: laser scanning point cloud, BIM tunnel model and terrain model from oblique photogrammetry. An adaptive BIM modelling scheme is proposed for tunnels with alien structures. Precise spatial registration of the data sets is conducted by applying singular value decomposition (SVD) algorithm to calculate transformation parameters from the point cloud model to the BIM model. Since the tunnel central line has high-order derivability, a cross-section calculation method based on tangent vector is proposed to obtain the cross-sectional profile of tunnels at any mileage. The proposed method has been verified by applying it to a tunnel reconstruction project. The experiment results show that the tunnel point cloud and the BIM model were highly coincident after the integration. The developed program can effectively get the cross-section of the tunnel at any mileage, and correctly express the spatial relationship between the BIM tunnel, the point cloud of tunnel and the external mountainous terrain.

The ongoing pandemic of COVID-19 has not only commenced a global health emergency but agitated various aspects of humanity. During this period of crisis researchers over the world have ramped their efforts to constrain the disease in all possible ways whether it is vaccination, therapy, or diagnosis. Since the spread of the disease has not yet elapsed sharing the ongoing research findings could be the key to disease control and management. An early and efficient diagnosis could leverage the outcome until a successful vaccine is developed. Molecular tests both in-house and commercial kits are preferably being used worldwide in the COVID-19 diagnosis. However, the limitation of high prices and lengthy procedures impede their use for mass testing. Keeping the constant rise of infection in mind search for an alternative test that should be cost-effective, simple, and suitable for large scale testing and surveillance is a need of an hour. One such alternative could be the immunological tests. Therefore, in the last few months deluge of immunological rapid tests has been developed and validated across the globe. The objective of the present review is to share the diagnostic performance of various immunological assays reported so far in SARS-CoV-2 case detection. The article consolidated the studies (published and preprints) related to the serological tests such as chemiluminescence, enzyme-linked and lateral flow-based point-of-care tests in COVID-19 diagnosis and updated the current scenario. This review will hopefully be an add-on in COVID-19 research and will contribute to congregate the evidence for decision-making.

The current coronavirus disease 2019 (COVID-19) pandemic is largely driven by community transmission, after 2019 novel Coronavirus (2019-nCoV or SARS-CoV-2) crosses the borders. To stop the spread, rapid testing is required at community clinics and hospitals. These rapid tests should be comparable with the standard PCR technology. Isothermal amplification technology provides an excellent alternative that is highly amenable to resource limited settings, where expertise and infrastructure to support PCR are not available. In this review, we provide a brief description of isothermal amplification technology, its potential and the gaps that need to be considered for SARS-CoV-2 detection. Among this emerging technology, loop mediated amplification (LAMP) and recombinase polymerase amplification (RPA) technologies have been identified as potential platforms that could be implemented at community level, without samples referral to a centralised laboratory and prolonged turn-around-time associated with the standard COVID-19 RT-PCR test. LAMP, for example, has recently been shown to be comparable with PCR and could be performed in less than 30 min by non-laboratory staff, without RNA extractions commonly associated with PCR. More so, it is cost effective and could easily be scaled up to resource limited settings. Diagnostics developers, scientific community and commercial companies could consider this alternative method to help stop the spread of COVID-19.

Background: In recent years, the abusive use of the smartphone has reached a situation that could be considered pathological, although there is no such classification in the DSM-IV. In this sense, different instruments to assess this problematic use or addiction to the smartphone are used. Among them, we found the SPAI, which has been validated in the Spanish language. The main difficulty of these scales is to establish a cut-off point that determines such mobile addiction. On the other hand, self-perception has been used in different addictions as a predictor of the problem. Aim: The objective of this study is to establish the cutting point in the scores of the SPAI scale validated in Spanish, using as a referent the self-perception of addiction values. Methods: A receiver operating characteristics (ROC) analysis was carried out, establishing as the cut-off point the one that presented a higher value of Youden J, indicative of its sensitivity and specificity. Results: 2598 participants from the university community completed the SPAI-Spain questionnaire. When using the self-perception of smartphone addiction as the benchmark value, a score of 44 has been established as the cutting point of the SPAI questionnaire, with a Youden J corresponding to 0.416. Conclusions: The implementation of a cut-off point of the SPAI questionnaire makes it an instrument that allows early identification of those individuals at risk of addiction as well as the establishment of preventive and/or intervention measures.

We present an improved algorithm for fast calculation of the inverse square root for single-precision floating-point numbers. The algorithm is much more accurate than the famous fast inverse square root algorithm and has a similar computational cost. The presented modification concern Newton-Raphson corrections and can be applied when the distribution of these corrections is not symmetric (for instance, in our case they are always negative).

New developments in broadcast technology, such as the ad hoc wireless network and the detection devices that work, enable daily connections to the Internet, commonly referred to as the Internet of Things (IoT). IoT saw this as a support for the development of creative and contextual services and applications. The service can respond to the user's environment and preferences. Finite state machines are recently making waves when the issue of self-controlling systems come into the picture of designs. This research focuses on the design of a fault tolerant system that controls random failures impressed on the network. The method comprises of diodes, Resistors, Optocouplers, ESP8266 WI-FI Module Webpage with button, and two Arduinos which in effect will determine iteratively who to handle a failure at hand modelled as when the button on the webpage is pressed. In this work, a Heartbeat Detection and Monitoring System will be made using Arduino that detect the electrical state using the Pulse Sensor and show the readings in Beats Per Minute on the LED connected a microcontroller. It sends the texts to the server using the Wi-Fi module ESP8266 to signals can be monitored from the monitoring zone via the internet. This is reflected by the declaration of a master state by either of two Arduinos whenever the push button is pressed as observed on the codes. The result obtained from the research shows apparently, the state of the fault tolerance system none power deny of heartbeat condition connected to the LED.

To determine the photon emission or absorption probability for a diatomic system in the context of the semiclassical approximation it is necessary to calculate the characteristic canonical oscillatory integral which has one or more saddle points. Integrals like that appear in a whole range of physical problems, e.g. the atom-atom and atom-surface scattering and various optical phenomena. A uniform approximation of the integral, based on the stationary phase method is proposed, where the integral with several saddle points is replaced by a sum of integrals each having only one or at most two real saddle points and is easily soluble. In this way we formally reduce the codimension in canonical integrals of "elementary catastrophes" with codimensions greater than 1. The validity of the proposed method was tested on examples of integrals with three saddle points ("cusp" catastrophe) and four saddle points ("swallow-tail" catastrophe).

The aim of this article is to extend the local as well as the semi-local convergence analysis of multi-point iterative methods using center Lipschitz conditions in combination with our idea, of the restricted convergence region. It turns out that this way a finer convergence analysis for these methods is obtained than in earlier works and without additional hypotheses. Numerical examples favoring our technique over earlier ones completes this article.

We consider Pisot family substitution tilings in $\R^d$ whose dynamical spectrum is pure point. There are two cut-and-project schemes(CPS) which arise naturally: one from the Pisot family property and the other from the pure point spectrum respectively. The first CPS has an internal space $\R^m$ for some integer $m \in \N$ defined from the Pisot family property, and the second CPS has an internal space $H$ which is an abstract space defined from the property of the pure point spectrum. However it is not known how these two CPS's are related. Here we provide a sufficient condition to make a connection between the two CPS's. In the case of Pisot unimodular substitution tiling in $\R$, the two CPS's turn out to be same due to [5, Remark 18.5].

In this paper, we introduced many new notions and new contraction named as S-weakly contraction after that we obtained the p-common best proximity point theorems for different types of contractions in the setting of complete metric spaces by using weak P_p-property and proved the uniqueness of these points. Also we presented some examples to prove the validity of our results.

The sustainability of irrigated agriculture depends on the quality of irrigation water used. The electrolyte concentration (EC) of irrigation water may lead to the accumulation of salts in the root zone layers and affect the physiological functions of the crop by osmotic and ion toxicity effects. Further, the cationic and anionic composition of the water may alter the exchangeable cation composition of the soil and as well as its pH. Because of the dominance of sodium salts in many sources of irrigation water, parameters related to sodium such as exchangeable sodium percentage (ESP) of soils and sodium adsorption ratio (SAR) of soil solutions have been commonly used to study the effects of sodium in irrigation water on soil structural stability. Quirk and Schofield concept of ‘threshold electrolyte concentration’ (TEC) has shown the importance of electrolytes in preventing the effects of sodium on soil structure. Based on this concept, several models have been proposed to relate ESP or SAR with EC to predict the possible impacts of irrigation water on soil structural stability. However, many research reports indicate that this relationship varies with soils and a given model is not suitable for all types of soils. Further, the effects of potassium and magnesium in the processes leading to clay dispersion are disregarded in these models. This essay analyses all the factors involved in the structural failure of soils with different cationic composition, identify the defects in these TEC models and re-defines TEC on the basis of new insights on dispersive and flocculating charges of soils. This review does not deal with EC effects on crops and also the role of contaminant ions not involved with soil structural stability.

Filamentous fungi such as Aspergillus spp. are opportunistic pathogens, which cause highly invasive infections, especially in immunocompromised individuals. Control of such fungal pathogens is increasingly problematic due to the small number of effective drugs available for treatment. Moreover, the increased incidence of fungal resistance to antifungal agents makes this problem a global human health issue. The cell wall integrity system of fungi is the target of antimycotic drugs echinocandins, such as caspofungin (CAS). However, echinocandins cannot completely inhibit the growth of filamentous fungal pathogens, which results in survival/escape of fungi during treatment. Chemosensitization was developed as an alternative intervention strategy, where co-application of CAS with the intervention catalyst octyl gallate (OG; chemosensitizer) greatly enhanced CAS efficacy, thus achieved ≥ 99.9% elimination of filamentous fungi in vitro. Based on hypersensitive responses of Aspergillus antioxidant mutants to OG, it is hypothesized that, besides destabilizing cell wall integrity, the redox-active characteristic of OG may further debilitate fungal antioxidant system.

The relocation of Indonesia's capital to the IKN (Ibukota Negara) Nusantara in East Kalimantan is leading to significant changes in land use, shifting from natural vegetation and agriculture to urban infrastructure. This transition brings about economic diversification and urban expansion, but it also raises concerns about its impact on society, the economy, and the environment. The rapid development affects biodiversity conservation, food security, and the livelihoods of rural and indigenous communities, leading to conflicts across social and economic dimensions. This research uses qualitative and quantitative data to examine the socio-economic and environmental changes in the IKN Nusantara area from 2003 to 2023. The findings show a notable increase in built-up areas, indicating urbanization and a decrease in agricultural land. The study discusses the implications for local populations and ecosystems, emphasizing the need for inclusive governance, community participation, and conflict resolution. It also proposes a comprehensive policy framework that promotes sustainable land management, recognizes indigenous and local rights, and fosters inclusive economic growth to respect Indonesia's rich environmental and cultural heritage.

Climate change is a big challenge for agriculture since it affects crop productivity and yield. The increase of droughts, salinity, and soil degradation are some of the main consequences of climate change. The use of microorganisms has emerged as an alternative to mitigate them. Among these microorganisms, dark septate endophytes (DSEs) have garnered more attention in recent years. Various studies show that their association with plants helps reduce the harmful effects of abiotic stresses and increases nutrient availability, allowing plants to thrive under adverse conditions. This work reviews the effect of DSEs and the subjacent mechanisms that will help plants develop a higher tolerance to climate change.

Bettelmatt cheese, a cherished Italian culinary gem hailing from the picturesque Val d'Ossola region, is deeply intertwined with its natural environment. This article explores the intricate relationship between the organoleptic attributes of Bettelmatt cheese and the challenges posed by climate change. The sensory qualities of this cheese, including its flavor profile, texture, and aroma, are profoundly influenced by the alpine pastures where the cows graze, the unique terroir, and the traditional production methods. However, as climate change continues to impact ecosystems and weather patterns, it raises questions about the resilience and adaptability of this traditional cheese. In addition to these challenges, the article would like to explore the complexities of regulation and protection of this cheese, crucial for food and gastronomic sciences.

Background:. Knowledge and positive perception of climate change are crucial for public participation in activities that contain climate change. Limited studies, particularly in South Africa have reported on the knowledge and perceptions of climate change by university students. Study Aim: This study aimed to assess the level of knowledge and perceptions of climate change by the science students at the University of South Africa (UNISA). Methods: This was a quantitative cross sectional survey, undertaken among science students using questionnaire emailed to 500 students in the School of Science through Unisa email system. Bivariate logistic regression was used to test the association between socio-demographics, level of knowledge and perceptions of climate change. Results: A total of 420 students participated in the study. They were predominantly male (70.3%), mostly younger than 35 years of age. Most of the respondents were in the 2nd (34.7%) and 3rd (33.8%) year of study. Majority of respondents (97.9%) knew and perceived (93.6%) that climate change was happening. Overall, 93.8% of respondents had an excellent knowledge and basic concepts of climate change. Conclusion: The majority of students were knowledgeable and had positive perceptions about the basic concepts of climate change. However, the year of study was not significantly associated with positive perceptions of climate change. There is need to include climate change modules in South African university curriculum.

Natural montane peatlands generally are not a significant source of nitrous oxide (N₂O) due to environment limitation including phosphorus (P) scarcity and temperature lowness. Phosphorus enrichment and warming caused by global change are altering this limitation, likely to increase the source function of N₂O. However, the combined effects of P addition and warming on N₂O fluxes and biotic/abiotic factor in peatlands are still uncertain. To address this, we investigated the long-term (12 yrs) effects of P addition (5 and 10 kg ha^-1 yr^-1) and its interaction with warming on N₂O fluxes in a peatland. The results showed that although long-term P addition did not significantly affect the source/sink function of N₂O in the peatland, it stimulated enzyme activities, promoted peat decomposition. However, warming amplified the effect of P addition to increase N₂O emissions by stimulating enzyme activities and changing soil stoichiometry, even turned the peatland into a significant source of N₂O with an emission of approximate 100 g m^-2 during the growing season. Our study suggests that P enrichment under the current background of global warming will enhance the possibility of strong N₂O emissions in montane peatlands, which may increase the risk to further aggravate global warming.

This study examines the projected impact of climate change on the Density Altitude (DA) at Chinese airports during the summer by the end of the 21st century. Findings indicate that climate change is expected to significantly increase the DA at all Chinese airports, with an estimated rise between 300 and 800 feet. The analysis suggests temperature increases will universally contribute to a rise in DA. Pressure changes, however, are more variable. Most airports are predicted to see an increase in pressure, which could offset some temperature effects on the DA. Airports in eastern China are expected to see a decrease in pressure, amplifying the effects on DA and creating operational challenges.

Understanding how climatic variables impact the reference evapotranspiration (ET0) is essential for water resource management, especially considering potential fluctuations due to climate change. Therefore, we used the Sobol method to analyze the spatiotemporal variations of Penman-Monteith ETo sensitivity to the climatic variables: downward solar radiation, relative humidity, maximum and minimum air temperature, and wind speed. The Sobol’s indices variances were estimated by Monte Carlo integration, setting the sample limits to 2.5 and 97.5 percentiles of the daily data of 33 automatic weather stations located in the state of Mato Grosso, Brazil. The results of the Sobol analysis indicate considerable spatiotemporal variations in the sensitivity of ETo to climatic variables and their interactions. The dominant climatic variable responsible for ET0 fluctuations in Mato Grosso is incident solar radiation, which has a more significant impact in humid environments, as observed in the areas of the Amazon biome in the state. Air relative humidity and wind speed have higher sensitivity indices during the dry season in the areas of the Cerrado biome (Savanna) in Mato Grosso. Our findings show that changes in solar radiation, relative humidity, and wind speed cannot be ignored when analyzing changes in reference evapotranspiration.

The Antarctica and High Arctic regions are extreme environments, with average maximum temperatures below 0 °C for most days of the year. Interestingly, fungi inhabit these regions. This review describes the history of fungal surveys near the Syowa Station and the fungal diversity in this region. In the High Arctic region, I summarized the changes in fungal communities in glacial retreat areas of Ny-Ålesund, Norway and Ellesmere Island, Canada in response to climate change. In addition, growth and enzyme secretion ability of Antarctic and Arctic fungi at sub-zero temperatures are presented. Finally, I have also provided the future directions of Antarctic and Arctic fungal research.

Changes in the dates of phenological phases of plants and insects reflect changes in climate. The aim of the study was to determine the phenological patterns and interrelationships of spring-flowering entomophilous plants (Corylus avellana L., Alnus incana Moench., Tussilago farfara L., Salix caprea L., Acer platanoides L., Taraxacum officinale L., Prunus L., Malus domestica Mill.) and the honey bee (Apis mellifera L.) in response to climate change. The research was carried out at Vokė Branch of the Institute of Agriculture, Lithuanian Research Centre for Agriculture and Forestry, using data from phenological observations during 1961–2020. The results of the studies showed that over a 60-year period, a trend towards earlier dates of all phenological events studied was observed. Significant and larger-scale changes occurred starting from the decade 1981–1990. Throughout the entire study period, with the exception of one decade, the dates of honeybee emergence on flowers correlated reliably with the dates of entomophilous plant phenophases. Due to the advance of plants phenophase dates the synchrony with honeybee emergence dates changes however, these changes had a positive effect on the foraging conditions of overwintering honeybees.

The build-up of greenhouse gases (GHGs) is causing warmness in the Earth’s atmosphere, resulting in climate change. The transport sector is one of the active members of GHG emissions and it is imperative to use sustainable transport sources to control climate change. The measure aims to encourage citizens to stop using their private vehicles as their choice of transport and instead opt for joint sustainable mobility during traveling. In this study, a quantitative research method was used and data were collected from a sample of 410 respondents through questionnaire. On the other hand, study also took a simulation-based (N=10000) sample size of private vehicle data. The data were analyzed using structural equation modelling. The results revealed that sustainable transportation, climate change technologies and electric rail vehicles reduce climate change in the ecoregions of China. We conclude that sustainable transportation policies could be formulated and implemented to reduce climate change. In response to the research results, it is recommended that, since climate change is a multi-level governance issue and the outdated pyramidal transport industry models must be shifted to a sustainable transportation system model.

Among the impacts of climate change in West Africa, coastal erosion is the most threatening disaster apart from floods and the increase in temperature. The southern coast of the Dakar region, as part of the most threatened coastal zones in West Africa, records the most current coastal damages in Dakar due to its coastline dynamics and low-lying area. This study was conducted in three littoral cells (Mbao, Bargny and Toubab Dialaw) and aims to investigate if there is a relationship between the coastline dynamic, topographic and slope and the contribution of the geomorphology along the southern coast of Dakar. It helps to understand better the role which plays the topography, Slope and geomorphology in coastal dynamics using remote sensing, cartographic tools and statistical methods. The Modified Normalized Different Water index (MNDWI) was employed to delineate the coastlines before computing the dynamic rate of the coastline using the Digital Shoreline Analysis System (DSAS) software. After that, Topography and Slope were determined using Digital Elevation Model (DEM). Then, the correlation between the coastline dynamic, topography and slope was analyzed through the coefficient of correlation and multiple linear regression model. High dynamic rates were noted in the littoral cells, where the topography and slope are low. In Mbao, there is a significant relationship between the coastline dynamic, topography and slope with a coefficient of correlation of about 0.63. In Bargny, the relationship is also significant, with a coefficient of 0.87. The relationship is not significant in Toubab Dialaw, where topography and Slope are high, with a coefficient of 0.15. We conclude that topography, slope and soil properties play an important role in the study area.

The paper provides a critical synthesis of analysis and evaluation of some case studies in the Italian national context, which allowed, through an inductive method, to assess, in terms of integration and coherence, the process of transposition of climate change adaptation contents, possibly already contained within a regional urban framework (Regional Urban Laws) or specific Regional Adaptation Strategies or Local Adaptation Plans, within the territorial and urban planning tools of metropolitan or local scale.

Climate change is the long-term shift in global weather patterns, largely caused by anthropogenic activity of greenhouse gas emissions. Global climate temperatures have unmistakably risen and naturally-occurring climate variability alone cannot account for this trend. Human activities are estimated to have caused about 1.0 °C of global warming above the pre-industrial baseline and if left unchecked, will continue to drastically damage the Earth and its inhabitants. Globally, natural disasters and subsequent economic losses have become increasingly impactful as a result of climate change. Both wildlife ecosystems and human habitats have been negatively impacted, from rising sea levels to alarming frequency of severe weather events around the world. Attempts towards alleviating the effects of global warming have often been at odds and remain divided among a multitude of strategies, reducing the overall effectiveness of these efforts. It is evident that collaborative action is required for avoiding the most severe consequences of climate change. This paper evaluates the main strategies (industrial/energy, political, economic, agricultural, atmospheric, geological, coastal, and social) towards both mitigating and adapting to climate change. As well, it provides an optimal combination of seven solutions which can be implemented simultaneously, working in tandem to limit and otherwise accommodate the harmful effects of climate change. Previous legislation and deployment techniques are also discussed as guides for future endeavors.

Climate change poses a major threat to development in most low and middle-income countries, especially the sub – Saharan Africa. Wurompo is a small farming community in the Wenchi Municipality of the Brong-Ahafo region of Ghana that depends on rain-fed agriculture activities for livelihood. In recent years, droughts, unpredictable rainfall pattern and crop failure have become common in the area. The study assessed knowledge and awareness, effects of climate change on female farmers, and their adaptation strategies. A case study in design, qualitative methods were used to collect data from 50 purposefully selected participants. Data were analyzed using themes and sub-themes generated from the research questions. Findings showed lack of adequate information and knowledge on climate change and its effects. Climate change has impacted negatively on these farmers stemming from decline in crop production and unavailability of adequate water supply in due season. Challenges to climate change adaptation are poverty, poor basic infrastructure, and modern farming practices. Farmers must be educated on climate change and its effects, with training on the necessary adaptation strategies to build their resilience. Policies that target rural farmers to adapt to climate change, and device modern agricultural techniques and practices are also necessary.

We revisit the notion of climate, along with its historical evolution, tracing the origin of the modern concerns about climate. The notion (and the scientific term) of climate has been established during the Greek antiquity in a geographical context and it acquired its statistical content (average weather) in modern times, after meteorological measurements had become common. Yet the modern definitions of climate are seriously affected by the wrong perception of the previous two centuries that climate should regularly be constant, unless an external agent acted. Therefore, we attempt to give a more rigorous definition of climate, consistent with the modern body of stochastics. We illustrate the definition by real-world data, which also exemplify the large climatic variability. Given this variability, the term “climate change” turns out to be scientifically unjustified. Specifically, it is a pleonasm as climate, like weather, has been ever changing. Indeed, a historical investigation reveals that the aim in using that term is not scientific but political. Within the political aims, water issues have been greatly promoted by projecting future catastrophes while reversing the true roles and causality directions. For this reason, we provide arguments that water is the main element that drives climate and not the opposite.

Not only are humans responsible for the anthropogenic causes of currently observed climate change, but we are also responsible for our responses to climate change. How we choose to respond provides important insights into our ability to collectively act in the face of threats with the unique characteristics of climate change. This communication attempts to provide an overview of some the difficulties in forging new policy directions along our coastlines in an era of climate change. It is meant as a referential framing for the research presented in this special issue. As this communication is being written, the world is gripped by a global pandemic caused by a variant of the coronavirus. There are important corollaries between the underlying characteristics of the coronavirus and the causes and effects of climate change. Seeing how the global citizenry is responding to the current epidemic provides some insight into the difficulties in fostering collective action towards climate change. As with the pandemic, the issue is not really one of understanding the problem, but rather the varying human responses to the problem. We can expect the same difficulties as we continue to confront the ever-growing problem of climate change.

Changing mobility patterns combined with changes in the climate present challenges and opportunities for global health, requiring effective, relevant and humane policy responses. This study used data from a systematic literature review that examined the intersection between climate change, migration and health. The aim of the present study was to synthesize policy recommendations in the peer-reviewed literature, regarding this type of environmental migration with respect to health, to strengthen the evidence-base. Systematic searches were conducted in four academic databases (PubMed, Ovid Medline, Global Health and Scopus) and Google Scholar for empirical studies published between 1990 – 2020 that used any study design to investigate migration and health in the context of climate change. Studies underwent a two-stage protocol-based screening process and eligible studies were appraised for quality using a standardized mixed-methods tool. From the initial 2,425 hits, 68 articles were appraised for quality and included in the synthesis. Among the policy recommendations, six themes were discernible: (1) avoid the universal promotion of migration as an adaptive response to climate risk; (2) preserve cultural and social ties of mobile populations; (3) enable the participation of migrants in decision-making in sites of relocation and resettlement; (4) strengthen health systems and reduce barriers for migrant access to health care; (5) support and promote optimization of social determinants of migrant health; (6) integrate health into loss and damage assessments related to climate change. The results call for transformative policies that support the health and wellbeing of people engaging in, or affected by mobility responses, including those whose migration decisions and experiences are influenced by climate change, and to establish and develop inclusive migrant healthcare.

Participatory Action Research (PAR) is an established method to implement change in organizations. However, it cannot be applied in the open source (FOSS) communities, without adaptation to their particularities, especially to the specific control mechanisms developed in FOSS. FOSS communities are self-managed, and rely on consensus to reach decisions. This study proposes a PAR framework specifically tailored to FOSS communities. We successfully applied the framework to implement a set of quality assurance interventions in the Robot Operating System community. The framework we proposed is composed of three components, interventions design, democratization, and execution. We believe that this process will work for other FOSS communities too. We have learned that changing a particular aspect of a FOSS community is arduous. To achieve success the change must rally the community around it for support and attract motivated volunteers to implement the interventions.

An opinion dependent cross sectional survey was conducted among charland peoples of Noakhali, Bangladesh with a view to identify the factors that affect green economy. Nijhumdwip Island and Tamaruddi union are highly affected by cyclone and soil salinity. Unpredictable rainfall is the most acute in Nijhumdwip. Lack of information the main problem in Nijhumdwip Island. Farmers are found less interest in integrated farming and crop diversification. Few farmers from Sonadia Union are involved in homestead gardening. Regression analysis have shown a negative relationship (p<0.001) between education of stockholders and decrease of crop production. On the other hand education level of stockholders is to be found positively (p<0.05) varied with decrease of food insecurity. So it can be said that educated farmers are more adaptive against climate change.

This research paper aims to examine the relationship between CO2, temperature, area, fertilizers and rice production in Pakistan. This study used Augmented Dickey Fuller (ADF) and Phillips Perron (PP) unit root tests to check the order of integration of each variable. The cointegration analysis with ARDL bounds testing approach is used to examine the impact of climate change on rice production in Pakistan over time series data from the period 1968 to 2014. The parameter stability test of the model is also checked at the end. The results of estimation show that the important variables of the study are cointegrated demonstrating the presence of long-run association among them. Furthermore, climate change factors, e.g. CO2 and temperature have a long-run and short-run positive effect on the production of rice in Pakistan. This present work is original and it is first time empirically tested the impact of climate change on rice production in Pakistan. The annual time series data of 47 years enhances the validity of the empirical findings. The most fruitful finding of this research is that rice production in Pakistan is positively influenced by emission of carbon dioxide (CO2) at 5 percent significance level in both long-run and short-run.