If an algebra of type $A$ contains a subalgebra which is also an algebra of type $B$, then it is a Smarandache $B$-type $A$-algebra provided the subalgebra of type $B$ contains at least two elements. This generalizes the notion of Smarandache group, where the group of order $\geq 2$ is a subsemigroup of a semigroup. In this paper we investigate a number of such pairings and we deduce a number of conclusions as a consequence.

COVID-19 pandemic will continue to pose a major public health threat until vaccination-mediated herd immunity is achieved. Most projections predict vaccine will reach a large subset of the population late in 2021 or early 2022. In the meantime, countries are exploring options to remove strict lockdown measures and allow for society and the economy to return to normal function. One possibility is to expand on existing COVID-19 testing strategies by including large-scale rapid point of care diagnostic tests (POCTs). Currently, there is significant variability in performance and features of available POCTs, making selection and procurement of appropriate test for specific use case difficult. In this review, we have used the World Health Organization’s (WHO) recently published Target Product Profiles (TPPs) for specific use cases of COVID-19 diagnostic tests to screen for top-performing POCTs on the market. Several top-performing POCTs, based on clinical sensitivity/specificity, the limit of detection, and time to results, that meet WHO TPP criteria for direct detection of SARS-CoV-2 (acute infection), or indirect diagnosis of past infection (host antibodies) are highlighted here.

Surface area and pore size distribution of Eucalyptus samples pretreated by different methods were determined by the Brunauer-Emmett-Teller (BET) technique. Three methods were applied to prepare cellulosic biomass samples for BET measurements: air, freeze, and critical point drying (CPD). Air and freeze drying caused severe collapse of biomass pore structures, but CPD effectively preserved biomass morphology. Surface area of CPD prepared Eucalyptus samples was determined to be 58–161 m2/g, whereas air and freeze dried samples were 0.5–1.3 and 1.0–2.4 m2/g, respectively. Average pore diameter of CPD prepared Eucalyptus samples were 61–70Å. CPD preserved Eucalyptus sample morphology by replacing water with a non-polar solvent, CO2 fluid, which prevented hydrogen bond reformation in the cellulose.

Bubble (point defect) – a precursor of fuzz or under dense nanostructure formation is crystal lattice defect. Suitable selection of crystal lattice which inhibit Frenkel pair generation and intrinsically promotes self- interstitial solid solution strengthening contributes effectively towards making plasma facing material. For this, interstitial sites, their size, amount / fraction, positions, tendency of occupation and diffusion parameters (e.g. activation energies (Q), activation volumes) are determined. Fcc iron carbon alloys (austenitic stainless steels AISI / SAE 321, fcc structure, Pearson code cF4, space group Fm3̅m) are proposed as suitable candidates. Along with their room temperature fcc structure having 12 interstitial positions (4 octahedral, 6 coordination sites and 8 tetrahedral, 4 coordination sites / unit cell) to allow insertion of self (iron) atoms, they have excellent corrosion resistance, thermal conductivity, and non- magnetic properties. After their melting, casting, and machining to required dimensions and geometry, stabilizing heat treatment is applied to precipitate all carbon as TiC and prevent formation of Cr23C6 (sensitization). This resist heat and surface degradation and yield excellent architecture which not onlyinhibit Frankel pair generation but will also allow bulk assimilation or surface annihilation (loop punching) of this lattice point defect. A superior thermal, fluid, and structural design augment above. A second choice is presented as Co base superalloys owing to same fcc crystal structure and excellent properties (such as strength, dimensional stability, oxidation resistance) at high temperature.

The study was conducted in north wollo, south wollo and orimiya zone, in Eastern Amhara with an aim to assess the resource potential of Acacia seyal in the selected sites. The data from the selected sites were collected using point center quarter method. A total of 90 quadrates from nine study areas with plot size 50m*50m, (22.5ha) were systematically located along each transect, 100 m apart, and was spatially captured with the aid of GPS. At every sampling point, four quadrants (90 degrees) were created, using the transect line and a line perpendicular to it. Species composition Acacia seyal structure and its regeneration status, at points along transects were taken to analyze diversity and target species structure of the sites. The highest and least density of Acacia seyal ha^-1 were attained by Mehale mecharie (148) and Alene sefer (52). The highest shannon weiner diversity and species richness was observed in Alene sefer(Kemessie). Acacia seyal structure in all study sites showed an inverted J shape except lastie gerdao (Gubalafeto). Therefore, Acacia seyal deserves immediate conservation and appropriate management measures in order to get sustainable product and services from the species. Based on the results, awareness creation on the values and management of Acacia seyal, study on the management options of Acacia seyal for firewood, fuel wood, charcoal production and also investigation of gum production techniques of Acacia seyal for the sustainable use of the resource are recommended.

The ongoing pandemic of COVID-19 has not only commenced a global health emergency but agitated various aspects of humanity. During this period of crisis researchers over the world have ramped their efforts to constrain the disease in all possible ways whether it is vaccination, therapy, or diagnosis. Since the spread of the disease has not yet elapsed sharing the ongoing research findings could be the key to disease control and management. An early and efficient diagnosis could leverage the outcome until a successful vaccine is developed. Molecular tests both in-house and commercial kits are preferably being used worldwide in the COVID-19 diagnosis. However, the limitation of high prices and lengthy procedures impede their use for mass testing. Keeping the constant rise of infection in mind search for an alternative test that should be cost-effective, simple, and suitable for large scale testing and surveillance is a need of an hour. One such alternative could be the immunological tests. Therefore, in the last few months deluge of immunological rapid tests has been developed and validated across the globe. The objective of the present review is to share the diagnostic performance of various immunological assays reported so far in SARS-CoV-2 case detection. The article consolidated the studies (published and preprints) related to the serological tests such as chemiluminescence, enzyme-linked and lateral flow-based point-of-care tests in COVID-19 diagnosis and updated the current scenario. This review will hopefully be an add-on in COVID-19 research and will contribute to congregate the evidence for decision-making.

Deformation flows are flows incorporating shear, strain and rotational components. These flows are ubiquitous in the geophysical flows, such as the ocean and atmosphere. They appear near almost any salience, such as isolated coherent structures (vortices and jets), various fixed obstacles (submerged obstacles, continental boundaries). Fluid structures subject to such deformation flows may exhibit drastic changes in motion. In this review paper, we focus on the motion of a small number of coherent vortices embedded in deformation flows. Problems involving isolated one and two vortices are addressed. When considering a single-vortex problem, the main focus is on the evolution of the vortex boundary and its influence on the passive scalar motion. Two vortex problems are addressed with the use of point vortex models, and the resulting stirring patterns of neighbouring scalars are studied by a combination of numerical and analytical methods from the dynamical system theory. Many dynamical effects are reviewed with emphasis on the emergence of chaotic motion of the vortex phase trajectories and the scalars in their immediate vicinity.

Knowledge about one’s innate health is central to a variety of positive mental health markers. However, men living in prison rarely receive education about how to access these internal resources. As such, this study seeks to replicate and extend emerging data on an innate health intervention. Volunteers from HMP Nottingham, England (n=126) participated in normal prison programming and the intervention group (n=65) received an additional 3-day intensive. The primary question: Does innate health function as a mediator in the same way self-control does within an incarcerated population? We conducted a mediation analysis, tested social desirability bias, and examined the impact of the intervention on crucial variables. This study found higher levels of innate health, self-control, wellbeing, and prosocial behavior and lower levels of aggression in the intervention group as compared to the control group. Importantly, innate health did play a mediating role equivalent to and/or partnering with self-control.

Purpose The gradual increase in geriatric issues and global imbalance of the ratio between patients and healthcare professionals has created a demand for intelligent systems with the least error-prone diagnosis results to be used by less medically trained persons and save clinical time. This paper aims at investigating the development of an image-based colourimetric analysis. The purpose of recognising such tests is to support wider users to begin a colourimetric test to be used at homecare settings, telepathology, etc. Design/methodology/approach The concept of an automatic colourimetric assay detection is delivered by utilising two cases. Training Deep Learning (DL) models on thousands of images of these tests using transfer learning, this paper i) classifies the type of the assay, and ii) classifies the colourimetric results. Findings This paper demonstrated that the assay type can be recognised using DL techniques with 100% accuracy within a fraction of a second. Some of the advantages of the pre-trained model over the calibration-based approach are robustness, readiness and suitability to deploy for similar applications within a shorter period of time. Originality/value To the best of our knowledge, this is the first attempt to provide Colourimetric Assay Type Classification (CATC) using DL. Humans are capable to learn thousands of visual classifications in their life. Object recognition may be a trivial task for humans, due to photometric and geometric variabilities along with the high degree of intra-class variabilities it can be a challenging task for machines. However, transforming visual knowledge into machines, as proposed, can support non-experts to better manage their health and reduce some of the burdens on experts.

Mortality and readmission rates for decompensated acute heart failure (AHF) is overall increasing and risk stratification might be challenging. We sought to evaluate the prognostic role of systemic venous ultraso-nography in patients hospitalized for AHF. We prospectively recruited 74 AHF patients with a NT-proBNP level above 500 pg/mL. Then, a multiorgan ultrasound assessment (lung, inferior vena cava, Doppler of hepatic, portal, intrarenal and femoral veins) were performed at admission, discharge, and follow-up (for 90 days). An intrarenal monophasic pattern (AUC 0.923, Sn 90%, Sp 81%, PPV 43%, NPV 98%), a portal pulsatility >50% (AUC 0.749, Sn 80%, Sp 69%, PPV 30%, NPV 96%) and a VExUS score of 3 (AUC 0.885, sensitivity 80%, specificity 75%, PPV 33%, NPV 96%) predicted death during hospitalization. An IVC above 2 cm (AUC 0.758, Sn 93.l% and Sp 58.3) and the presence of an intrarenal monophasic pattern (AUC 0. 834, sensitivity 0.917, specificity 67.4%) in the follow-up visit predicted AHF related readmission. Addi-tional scans during hospitalization or calculate a VExUS score probably adds unnecessary complexity to the assessment of AHF patients. In conclusion, VExUS score does not contribute to guide therapy or the predic-tion of complications, compared to the presence of an inferior vena cava greater than 2 cm, a venous mo-nophasic intrarenal pattern or a pulsatility > 50% of the portal vein in AHF patients. Early and multidisci-plinary follow-up visit remains necessary to improve prognosis of this highly prevalent disease.

In this paper we describe a nonparametric maximum likelihood (NPML) method for estimating multivariate mixing distributions. Given $N$ independent observations, convexity theory shows that the NPML estimator is discrete with at most $N$ support points. The original infinite NPML problem then becomes the finite dimensional problem of finding the location and probability of the support points. The probability of the support points is found by a Primal-Dual Interior-Point method; the location of the support points is found by an Adaptive Grid method. Our method is able to handle high-dimensional and complex multivariate mixture models.An important application is discussed for the problem of population pharmacokinetics and a non-trivial example is treated.Our algorithm has been successfully applied in hundreds of published pharmacometric studies. In addition to population pharmacokinetics, this research also applies to empirical Bayes estimation and many other areas of applied mathematics.

In this article, we show the existence of fixed point for the derivative of interval-valued functions. Meanwhile, the fixed point inquiry will utilize the common fixed point methods under the condition of compatibility of the hybrid composite mappings in the sense of the Hausdorff metric. Some examples are given to support the usability of the result of this research .

Background: In recent years, the abusive use of the smartphone has reached a situation that could be considered pathological, although there is no such classification in the DSM-IV. In this sense, different instruments to assess this problematic use or addiction to the smartphone are used. Among them, we found the SPAI, which has been validated in the Spanish language. The main difficulty of these scales is to establish a cut-off point that determines such mobile addiction. On the other hand, self-perception has been used in different addictions as a predictor of the problem. Aim: The objective of this study is to establish the cutting point in the scores of the SPAI scale validated in Spanish, using as a referent the self-perception of addiction values. Methods: A receiver operating characteristics (ROC) analysis was carried out, establishing as the cut-off point the one that presented a higher value of Youden J, indicative of its sensitivity and specificity. Results: 2598 participants from the university community completed the SPAI-Spain questionnaire. When using the self-perception of smartphone addiction as the benchmark value, a score of 44 has been established as the cutting point of the SPAI questionnaire, with a Youden J corresponding to 0.416. Conclusions: The implementation of a cut-off point of the SPAI questionnaire makes it an instrument that allows early identification of those individuals at risk of addiction as well as the establishment of preventive and/or intervention measures.

Although the Slicing Method (SM) is effective for calculating the volume of point cloud objects (PCOs), it is restricted in terms of applicability and practicability because of a certain contingency and directional defects. The Co-Opposite-Direction Slicing Method (CODSM) proposed in this paper is an improved method for calculating PCO volume by increasing parallel (co-opposite-direction) observation and considering the two-way mean as the result. This method takes full advantage of the mutual offsetting of random errors and the compensation of systematic directional errors, which can effectively overcome (or mitigate) the effect of random errors and reduce the effect of systematic errors in SM. In this paper, two typical objects, a cone model and a stone lion base, are the examples for calculating PCO volume using CODSM. The results show that CODSM has all the inherent advantages of SM and effectively weakens the volatility of random errors and the directionality of systematic errors from SM. Therefore, CODSM is a robust configuration upgrade of SM.

Laser scanning is an effective tool for acquiring geometric attributes of trees and vegetation, which lays a solid foundation for 3-dimensional tree modelling. Existing studies on tree modelling from laser scanning data are vast. Nevertheless, some works don’t ensure sufficient modelling accuracy, while some other works are mainly rule-based and therefore highly depend on user inputs. In this paper, we propose a novel method to accurately and automatically reconstruct tree branches from laser scans. We first extract an initial tree skeleton from the input tree point cloud, then simplify the skeleton through iteratively removing redundant components. A global-optimization approach is performed to fit a sequence of cylinders to approximate the geometry of the tree branches. Experiments on various types of trees from different data sources demonstrate the effectiveness and robustness of our method. The resulted tree models can be further applied in the precise estimation of tree attributes, urban landscape visualization, etc.

Considering the fault "N-1" checksum and the power flow, the single-phase power flow model is further transformed into a three-phase power flow model, and the asymmetry of the three-phase power flow is measured by the three-phase unbalance factor. The calculation model is linearized by the second-order cone relaxation and the Big-M method. At the same time, the load response and distribution network reconstruction are used to improve the reliability of the power supply network to cope with the power failure. The relationship between power supply capability and power flow constraints, main transformer capacity and distributed power parameters is analyzed by IEEE 33-node three-phase power distribution system. The feasibility of the proposed model and the accuracy of the second-order cone relaxation are verified by numerical examples, which provides a technical reference for distribution network planning.

Protein is the proteios building block of life. Evolutionarily, its sequence is not as conserved as its structure, making it more reasonable for protein structure, instead of protein sequence, to be the descriptor of protein function. Yet, in the National Center for Biotechnology Information (NCBI) database, the number of experimentally identified protein sequences is in great excess of that of experimentally determined protein structures inside the almost-half-a-century old Protein Data Bank (PDB). For instance, GPR151 is an proton-sensing G-protein coupled receptor (GPCR) originally identified as homologous to galanin receptors. As of March 19, 2020, GPR151’s structure has not been experimentally determined and deposited in PDB yet. Thus, an ab initio modelling approach was employed here to build a three-dimensional structure of GPR151. Overall, the ab initio GPR151 model presented herein constitutes the first structural hypothesis of GPR151 to be experimentally tested in future with previously published, currently ongoing and future GPR151 studies.

Salmon farming has been blamed for the collapse of the sea trout (Salmo trutta) fishery in Loch Maree on Scotland’s west coast despite the absence of any direct evidence. Stocks of west coast demersal marine fish, especially around the Clyde Estuary have also declined over a similar time span. The decline of these marine fish stocks can be attributed to the removal of the “three-mile fishing limit” in 1984 by UK Government legislation. Sea trout inhabit the same inshore waters as targeted demersal fish and can be caught as by-catch. Comparisons of the decline of demersal species and the sea trout from Loch Maree and the west coast show a high degree of correlation. Stocks of whiting (Merlangius merlangus) from inshore waters have found to consist of small fish which mirrors the stock makeup of the Loch Maree sea trout stock.

We construct a real square system related to a given over-determined real system. We prove that the simple real zeros of the over-determined system are the simple real zeros of the related square system and the real zeros of the two systems are one-to-one correspondence with the constraint that the value of the sum of squares of the polynomials in the over-determined system at the real zeros is identically zero. After certifying the simple real zeros of the related square system with the interval methods, we assert that the certified zero is a local minimum of the sum of squares of the input polynomials. If the value of the sum of the squares of the input polynomials at the certified zero is equal to zero, it is a zero of the input system. As an application, we also consider the heuristic verification of the isolated zeros of polynomial systems and their multiplicity structures. Notice that a complex system with complex zeros can be transformed into a real system with real zeros.

This paper addresses the issues of how we can quantify structural information for nonparametric distributions and how we can detect its changes. Structural information refers to an index for a global understanding of a data distribution. When we consider the problem of clustering using a parametric model such as a Gaussian mixture model, the number of mixture components (clusters) can be thought of as structural information in the model. However, there does not exist any notion of structural information for nonparametric modeling of data. In this paper we introduce a novel notion of {\em kernel complexity} (KC) as structural information in the nonparametric setting. The key idea of KC is to combine the information bias inspired by the Gini index with the information quantity measured in terms of the normalized maximum likelihood (NML) code length. We empirically show that KC has a property similar to the number of clusters in a parametric model. We further propose a framework for structural change detection with KC in nonparametric distributions. With synthetic and real data sets we empirically demonstrate that our framework enables us to detect structural changes underlying the data and their early warning signals.

We present simple relations for nuclear stability and nuclear binding energy with respect to three gravitational constants associated with electroweak, strong and electromagnetic interactions.

With quick improvement in the field of network, everything becomes online. Remote user authentication is a mechanism in which remote server verify the correctness of user over common or public channel. Remote user authentication can be Single server authentication or Multi server authentication. The disadvantage of single server authentication is that the user needs to recall user id and password for each service, he/she need to utilize, however it can overcome by Multi-server authentication in which user needs to register himself with Registration Center (RC) for the first run through and after that onwards he can utilize each service (which are given by servers, associated with RC) by recollecting only one user id and password. In this paper, we analyze Chen's authentication scheme (based on multi server authentication) and show that this scheme is vulnerable to password guessing attack, replay attack, RC spoofing attack, session key verification attack and perfect forward secrecy attack. In this Paper, we propose a biometric based remote user authentication scheme in multi-server environment. Proposed scheme is more secure and efficient as compared to chen's scheme\cite{23}.

Abstract: Our goal is to create point-of-care (POC) strategies that accelerate decision making, increase efficiency, improve outcomes, and enhance standards of care in island communities faced with global warming, rising oceans, population migration, and intensifying weather disasters. We assessed needs in the Bantayan Archipelago and mainland Cebu Province, Visayas Islands, Philippines, to map POC diagnostics, rescue times, and spatial care paths. Significant deficiencies were lack of cardiac troponin testing for rapid diagnosis of acute myocardial infarction, absence of blood gas and pH testing for support of critically ill patients, and geographic gaps prolonging patient transfers and delaying treatment. Strengths comprised primary care that can be facilitated by POC testing, logical inter-island transfers for which decision making and triage could be accelerated with onboard diagnostic testing, and healthcare small-world networks amenable to POC advances, such as pre-hospital testing, that avoid overloading emergency rooms. Healthcare resources must be distributed to archipelago islands, not concentrated in large metropolitan areas inaccessible for emergency interventions. We conclude that a point-of-need focus will help improve public health, decrease disparities in mortality among rural islanders versus urban dwellers, and pave the way for heightened resilience in anticipation of the adverse impact of global warming on vulnerable coastal areas.

ARBTools is a Python library containing a Lekien-Marsden type tricubic spline method for interpolating three-dimensional scalar or vector fields presented as a set of discrete data points on a regular cuboid grid. ARBTools was developed for simulations of magnetic molecular traps, in which the magnitude, gradient and vector components of a magnetic field are required. Numerical integrators for solving particle trajectories are included, but the core interpolator can be used for any scalar or vector field. The only additional system requirements are NumPy.

The transition from Building Information Modelling (BIM) to Heritage Building Information Modelling (H-BIM) is intended to pursue an adequate knowledge of the artefact that is to be preserved, progressively replacing the traditional methods of the restoration and structural reinforcement projects with new tools for managing both existing information and new interventions. The aim of the paper is to show the application of the H-BIM method to a stone pavement road located in the Archaeological Site of Pompeii. In detail, starting from a Laser Scanner based survey, juxtaposed by coordinated points georeferenced through a total station, points clouds were handled by means of several BIM-based tools to perform the road design process, starting from the digital elevation model (DEM) to the corridor representation. Subsequently, a visual programming application based on Python language was adopted to update corridor information by means of the object property set. As preliminary results, a tool, complete with graphical and non-graphical information, is proposed to be used in conservation, maintenance and restoration project.

This paper deals with the study of the existence and non existence of solutions of a three parameter's family of nonlinear fractional differential equation with mixed-integral boundary value conditions. We consider the $\alpha$-Riemann-Liouville fractional derivative, with $\alpha \in (1,2]$. In order to deduce the existence and non existence results, we first study the linear equation, by deducing the main properties of the related Green's functions. We obtain the optimal set of parameters where the Green's function has constant sign. After that, by means of the index theory, the nonlinear boundary value problem is studied. Some examples, at the end of the paper, are showed to illustrate the applicability of the obtained results.

In this study, we investigate the form of solutions, stability character and asymptotic behavior of the following four rational difference equations x_{n+1} = (1/(x_{n}(x_{n-1}±1)±1)), x_{n+1} = ((-1)/(x_{n}(x_{n-1}±1)∓1)), such that their solutions are associated with Tribonacci numbers.

The paper proposes a novel methodology for the stabilization of shallow foundations, with a simplified model combined with 3D Electrical resistivity tomography (ERT-3D) and conso- lidation injections. To determine its usefulness, the method has been applied in a case located in Estepona (southern Spain). The chosen tomography model is the dipole-dipole configuration, with an optimized distance between electrodes of 0.80 m for a better visualization of the foundation subsoil; with this parameterization, a total of 72 electrodes were installed in the analyzed case. In this work, the depth of the anomaly in the building's supporting subsoil was detected ranging from 2.00 m to 3.90 m deep. The study also delineates areas of high resistivity variations (50-1,000 Ω m) in the middle and eastern end of the field. These data have been validated and corroborated with a field campaign. The results of the ERT-3D monitoring are presented, once the investment data has been processed with the RES3DINV software, from the beginning to the end of the stabilization intervention. The novelty occurs with the interaction between the tomography and the foundation consolidation injections, until the final stabilization; very useful methodology in case of emergency consolidation, where there is a need to minimize damage to the building. Thus, people using this combined system; will be able to practically solve the initial anomalies of the subsoil that caused the damages, in a non-invasive way, considerably lowering the value of the resistivities.

Hemoconcentration membranes used in cardiopulmonary bypass require a pore structure design with high pure water permeability, and which does not allow protein adsorption and useful protein loss. However, studies on hemoconcentration membranes have not been conducted yet. The purpose of this study was to analyze three-dimensional pore structures and protein fouling before and after blood contact with capillary membranes using the tortuous pore diffusion model and a scanning probe microscope system. We examined two commercially available capillary membranes of similar polymer composition that are successfully used in hemoconcentration clinically. Assuming the conditions of actual use in cardiopulmonary bypass, we perfused these membranes with bovine blood. Pure water permeability before and after bovine blood perfusion was measured using the dead-end filtration. The scanning probe microscopy system was used for analysis. High-resolution three-dimensional pore structures on the inner surface of the membranes were observed before blood contact. On the other hand, pore structures after blood contact could not be observed due to protein fouling. The pore diameters calculated by the tortuous pore diffusion model and scanning probe microscopy were mostly similar and could be validated reciprocally. Achievable pure water permeabilities showed no difference despite protein fouling, leading to low values of albumin SC. This is due to the mechanism that protein fouling occurs on the membrane surface, while there is little internal pore blocking. Therefore, controlling the fouling is essential for membranes in medical use. These characteristics of the hemoconcentration membranes examined in this study are suitable for clinical use.

Repeat-Induced Point mutations (RIP) serves as a genome defence mechanism that impedes the deleterious consequences of repeated motifs such as transposable elements in fungi. Genomic regions with RIP are biased for adenosine and thymine transitions and the cumulative influence of RIP is thought to have a considerable impact on genome composition. We investigated the impact of RIP on localized genomic regions and whole-genome sequences for representatives of the pine pathogen, Fusarium circinatum. We set out to determine the intraspecific variation in acquired RIP and the role of RIP in the development of diverse F. circinatum sub-genomic compartments. The results of the study show that the AT-enriched sub-genomic compartment accounts for ca. 97% of the calculated RIP and was further prominent in both core and accessory genomic regions. However, more extensive RIP was observed in the accessory sub-compartment and more variable regions of the genome. Regions with RIP indicated increased intrinsic curvature of the DNA which may influence DNA-protein interactions and may promote constitutive heterochromatin formation. The results show that RIP is an important source of functional novelty and genome variation. RIP contributes to the evolution of the genetic landscape and differentiation of diverse sub-genomic compartments of this important fungal pathogen.

The safe and reliable operation of autonomous vehicles in complex and dynamic environments is heavily dependent upon exteroceptive and proprioceptive sensors. A LiDAR system generates accurate 3D point clouds, which are crucial for the detection, classification, and tracking of multiple targets. LiDAR data, however, presents significant challenges due to its density, noise, and varying sampling rates. In this study, various clustering and MTT techniques for LiDAR point clouds will be identified and classified within the context of autonomous driving to assess the state-of-the-art methods’ key challenges and their performances. We have categorized clustering and MTT methods used in AV applications, identified research gaps and challenges and analyzed existing algorithms and their challenges in detail. Researchers and practitioners in the field of autonomous driving will find this review to be a valuable resource.

In this paper, several two-dimensional clustering scenarios are given. In those scenarios, soft partitioning clustering algorithms (Fuzzy C-means (FCM) and Possibilistic c-means (PCM)) are applied. Afterward, VAT is used to investigate the clustering tendency visually, and then in order of checking cluster validation, three types of indices (e.g., PC, DI, and DBI) were used. After observing the clustering algorithms, it was evident that each of them has its limitations; however, PCM is more robust to noise than FCM as in case of FCM a noise point has to be considered as a member of any of the cluster.

Immunotherapy has gained great momentum with chimeric antigen receptor T cell (CAR-T) therapy, in which patient’s T lymphocytes are genetically manipulated to recognize tumor-specific antigens increasing tumor elimination efficiency. In the last years, CAR-T cell immunotherapy for hematological malignancies achieved a great response rate on patients and is a very promising therapy for several other malignancies. Each new CAR design requires a preclinical proof-of-concept experiment using immunodeficient mouse models. The absence of a functional immune system in these mice makes them simple and suitable to be mathematically modeled. In this work, we developed a three population mathematical model to describe tumor response to CAR-T cell immunotherapy in immunodeficient mouse models, encompassing interactions between a non-solid tumor and CAR-T cells (effector and long-term memory). We account for several phenomena, such as tumor-induced immunosuppression, memory pool formation, and conversion of memory into effector CAR-T cells in the presence of new tumor cells. Individual donor and tumor specificities were considered as uncertainties in the model parameters. Our model is able to reproduce several CAR-T cell immunotherapy scenarios, with different CAR receptors and tumor targets reported in the literature. We found that therapy effectiveness mostly depends on some specific parameters such as the differentiation of effector to memory CAR-T cells, CAR-T cytotoxic capacity, tumor growth rate, and tumor-induced immunosuppression. In summary, our model can contribute to reduce and optimize the number of in vivo experiments with in silico tests to select specific scenarios that could be tested in experimental research. Such in silico laboratory was made available in a Shiny R-based platform called CARTmath. It is an open-source, easy to run simulator, available at github.com/tmglncc/CARTmath or directly on the webpage cartmath.lncc.br, containing this manuscript results as examples and documentation. The developed model, together with the CARTmath platform, provides potential use for assessing different CAR-T cell immunotherapy protocols and associated efficacy, becoming an accessory towards in silico trials.

Current clinical treatment options for symptomatic, partial-thickness rotator cuff tear (sPTRCT) offer only limited potential for true tissue healing and improvement of clinical results. In animal models, injections of adult stem cells isolated from adipose tissue into tendon injuries evidenced histological regeneration of tendon tissue. However, it is unclear whether such beneficial effects could also be observed in a human tendon treated with fresh, uncultured, autologous, adipose derived regenerative cells (UA-ADRCs). A specific challenge in this regard is that UA-ADRCs cannot be labeled and, thus, not unequivocally identified in the host tissue. Therefore, histological regeneration of injured human tendons after injection of UA-ADRCs must be assessed using comprehensive, immunohistochemical and microscopic analysis of biopsies taken from the treated tendon a few weeks after injection of UA-ADRCs.

To determine the photon emission or absorption probability for a diatomic system in the context of the semiclassical approximation it is necessary to calculate the characteristic canonical oscillatory integral which has one or more saddle points. Integrals like that appear in a whole range of physical problems, e.g. the atom-atom and atom-surface scattering and various optical phenomena. A uniform approximation of the integral, based on the stationary phase method is proposed, where the integral with several saddle points is replaced by a sum of integrals each having only one or at most two real saddle points and is easily soluble. In this way we formally reduce the codimension in canonical integrals of "elementary catastrophes" with codimensions greater than 1. The validity of the proposed method was tested on examples of integrals with three saddle points ("cusp" catastrophe) and four saddle points ("swallow-tail" catastrophe).

In this paper, we introduced many new notions and new contraction named as S-weakly contraction after that we obtained the p-common best proximity point theorems for different types of contractions in the setting of complete metric spaces by using weak P_p-property and proved the uniqueness of these points. Also we presented some examples to prove the validity of our results.

Magnetometric Resistivity(MMR) Method, which can use the power supply method of the traditional apparent resistivity method to measure the magnetic field. At present, the application research abroad is relatively extensive, but the domestic(China) research on the application of the MMR method is very few, and it is not even well-known. This paper is based on the MMR theoretical method under the point source DC condition, combined with the abnormal potential method and the modified Biot-Savart law, and using the three-dimensional numerical calculation method of the finite difference method to calculate the abnormal potential field, electric field, and magnetic field on the matlab2018a platform. Calculate, realize the multi-physics simulation in the electromagnetic field through Matlab platform programming, and verify the correctness of the algorithm by the spherical anomaly model with an analytical solution. Through the visual simulation of the three-dimensional data volume of the multi-physics field in the electromagnetic field, we can better understand the response mechanism of the electromagnetic field under DC conditions and grasp their three-dimensional spatial distribution rules. It is hoped that the research in this article can help the research of MMR Personnel better use this method for exploration.

We analyze the modular geometry of the variable exponent Lebesgue space L^p(.). We show that L^p(.) possesses a modular uniform convexity property. Part of the novelty is that the property holds even in the case supp(x) = ∞ . We present specific applications to fixed point theory. xÆΩ

We reveal the significance of plasmonic nanoparticle’s (NP) shape and its surface morphology en route to an efficient self-assembled plasmonic nanoparticle cluster. A simplified model is simulated in the form of free-space dimer and trimer nanostructures (NPs in shape of sphere, cube, and disk). A ~ 200 % to ~ 125% raise in near field strength (gap mode enhancement) is observed for spherical NPs in comparison with cubical NPs (from 2 nm to 8 nm gap sizes). Full-width three-quarter maximum reveals better broad-spectral optical performance in a range of ~ 100 nm (dimer) and ~ 170 nm (trimer) from spherical NPs as compared to a cube (~ 60 nm for dimer and trimer). These excellent properties for sphere-based nanostructures are merited from its dipole mode characteristics.

This paper aims at tackling with the task of fusion feature from images and its corresponding point clouds for 3D object detection in autonomous driving scenarios basing on AVOD, an Aggregate View Object Detection network. The proposed fusion algorithms fuse features targeted from Bird’s Eye View (BEV) LIDAR point clouds and its corresponding RGB images. Differs in existing fusion methods, which are simply the adoptions of concatenation module, element-wise sum module or element-wise mean module, our proposed fusion algorithms enhance the interaction between BEV feature maps and its corresponding images feature maps by designing a novel structure, where single level feature maps and another utilizes multilevel feature maps. Experiments show that our proposed fusion algorithm produces better results on 3D mAP and AHS with less speed loss comparing to existing fusion method used on the KITTI 3D object detection benchmark.

In this work, we extend the fundamental results of Schu to the class of monotone asymptotically nonexpansive mappings in modular function spaces. In particular, we study the behavior of the Fibonacci-Mann iteration process defined by $$x_{n+1} = t_n T^{\phi(n)}(x_n) + (1-t_n)x_n,$$ for $n \in \mathbb{N}$, when $T$ is a monotone asymptotically nonexpansive self-mapping.

Based on the Expected Utility Theory and Regret Theory, the Extended Regret Theory (ERT) is proposed in this paper to study the optimal pricing strategy of retailers in e-commerce environment. Taking the diversity of sales channels and the uncertainty of consumers in e-commerce environment into consideration, author of the paper designs an extended regret utility function which comprehensively considers both pessimistic and optimistic attitudes of decision makers in retailing industry to describe their regret-avoidance behavior. According to the sensitivity analysis, it is found that the optimal retail price decreases as the consumer price sensitivity coefficient increases, yet does not show variation with changes of the consumers pessimism degree. Moreover, the optimal retail price(s) obtained under EUT, ERT and combination of EUT and ERT represent the same.

The purpose of this paper is to prove strong convergent theorems for Browder's type iterations and Halpern's type iterations of a family of nonexpansive mappings in a complete geodesic space with curvature bounded above by a positive number. Moudafi's viscosity type methods are also discussed without the nice projection property.

Empirical Colebrook equation from 1939 is still accepted as an informal standard to calculate friction factor during the turbulent flow (4000 < Re < 10⁸) through pipes from smooth with almost negligible relative roughness (ε/D→0) to the very rough (up to ε/D = 0.05) inner surface. The Colebrook equation contains flow friction factor λ in implicit logarithmic form where it is, aside of itself; λ, a function of the Reynolds number Re and the relative roughness of inner pipe surface ε/D; λ = f (λ, Re, ε/D). To evaluate the error introduced by many available explicit approximations to the Colebrook equation, λ ≈ f(Re, ε/D), it is necessary to determinate value of the friction factor λ from the Colebrook equation as accurate as possible. The most accurate way to achieve that is using some kind of iterative methods. Usually classical approach also known as simple fixed point method requires up to 8 iterations to achieve the high level of accuracy, but does not require derivatives of the Colebrook function as here presented accelerated Householder’s approach (3^rd order, 2^nd order: Halley’s and Schröder’s method and 1^st order: Newton-Raphson) which needs only 3 to 7 iteration and three-point iterative methods which needs only 1 to 4 iteration to achieve the same high level of accuracy. Strategies how to find derivatives of the Colebrook function in symbolic form, how to avoid use of the derivatives (Secant method) and how to choose optimal starting point for the iterative procedure are shown. Householder’s approach to the Colebrook’s equations expressed through the Lambert W-function is also analyzed. One approximation to the Colebrook equation based on the analysis from the paper with the error of no more than 0.0617% is shown.

An explanation of the origin of dark matter is suggested in this work. The argument is based on symmetry considerations about the concept of mass. In the Wigner's view, the rest mass and the spin of a free elementary particle in flat space-time are the two invariants that characterize the associated unitary irreducible representation of the Poincar\'e group. The Poincar\'e group has two and only two deformations with maximal symmetry. They describe respectively the de Sitter (dS) and Anti de Sitter (AdS) kinematic symmetries. Analogously to their shared flat space-time limit, two invariants, spin and energy scale for de Sitter and rest energy for Anti de Sitter, characterize the unitary irreducible representation associated with dS and AdS elementary systems. While the dS energy scale is a simple deformation of the Poincaré rest energy and so has a purely mass nature, AdS rest energy is the sum of a purely mass component and a kind of zero-point energy derived from the curvature. An analysis based on recent estimates on the chemical freeze-out temperature marking in Early Universe the phase transition quark-gluon plasma epoch to the hadron epoch supports the guess that dark matter energy might originate from an effective AdS curvature energy.

Background and Objectives: Acute Heart Failure (AHF) is a common disease and a cause of high morbidity and mortality, constituting a major health problem. The main purpose of this study was to determine the impact of multiorgan ultrasound in identifying the pulmonary hypertension (PH) in patients admitted due to AHF, predict the evolution of the disease during hospitalization and identify areas of improvement in the care of patients with AHF. Materials and Methods: Patients were evaluated with a standard exam of lung ultrasound, echocardiography, inferior vena cava (IVC) and femoral, renal, hepatic, portal venous Doppler flow patterns at admission and on the day of discharge. Results: Thirty patients were enrolled during November 2021. The mean age was seventy-nine years (Standard Deviation – SD 13,4). Seven patients (23.3%) had a renal function worsening. Regarding ultrasound findings, venous excess ultrasonography score (VExUS) score was calculated at admission and at discharge, surprisingly remaining unchanged or even worsened in most of them (21 patients, 70.0%). The area under the curve for the Lung Score was 83.9% (p = 0.008), obtaining a cutoff value of 10 that showed a sensitivity of 82.6% and a specificity of 71.4% in the identification of intermediate and high PH. It was possible to monitor significant changes between both exams on the lung score (p &lt;0.001), hepatic vein Doppler (p &lt;0.001), portal vein Doppler (p = 0.030), intra-renal vein Doppler (p = 0.025) and VExUS score (p = 0.023), remaining similar the femoral vein Doppler (p = 0.177) and IVC (p = 0.132). Conclusions: Our study results suggest that performing serial multiorgan Point-of-Care ultrasound can help us to better identify high and intermediate probability of PH patients with AHF. Currently proposed multi-organ, venous Doppler scanning protocols, such as the VExUS score, should be further studied in different populations before expanding its use in AHF patients.

Goals: To use visual logistics for interpreting COVID-19 molecular and rapid antigen test (RAgT) performance, determine prevalence boundaries where risk exceeds expectations, and evaluate benefits of recursive testing along home, community, and emergency spatial care paths. Methods: Mathematica/open access software helped graph relationships, compare performance patterns, and perform recursive computations. Results: Tiered sensitivity/specificity comprise: T1) 90%/95%; T2) 95%/97.5%; and T3) 100%/≥99%, respectively. In emergency medicine, median RAgT performance peaks at 13.2% prevalence, then falls below T1, generating risky prevalence boundaries. RAgTs in pediatric ERs/EDs parallel this pattern with asymptomatic worse than symptomatic performance. In communities, RAgTs display large uncertainty with median prevalence boundary of 14.8% for 1/20 missed diagnoses, and at prevalence >33.3-36.9% risk 10% false omissions for symptomatic subjects. Recursive testing improves home RAgT performance. Home molecular tests elevate performance above T1, but lack adequate validation. Conclusions: Widespread RAgT availability encourages self-testing. Asymptomatic RAgT and PCR-based saliva testing present the highest chance of missed diagnoses. Home testing twice, once just before mingling, and molecular-based self-testing help avoid false omissions. Community and ER/ED RAgTs can identify contagiousness in low prevalence (<22%). Real-world trials of performance, cost-effectiveness, and public health impact could identify home molecular diagnostics as the optimal diagnostic portal.

Abstract—Low-frequency Fahræus–Lindqvist-driven (not blood pressure-driven) oscillations in the small vessels are crucial because oscillations in small vessels support nutrient supply. Understanding of this is critical in type 2 diabetes mellitus (T2DM) to develop therapeutic measures to prevent Alzheimer's Disease Related Dementias: vascular factors contribute to cerebrovascular disease as well as mild cognitive impairment and dementia, which are predicted to affect 152 million people by 2050 (Alzheimer's Disease International London, UK, 2019). In this clinical study, we performed functional near-infrared spectroscopy (fNIRS) of the forehead to investigate the effect of the Mini-Cog with three-item recall test on the prefrontal cortex (PFC) activation and the relative oscillatory power in the 0.01–0.02-Hz (Fahræus–Lindqvist effect) and 0.021–0.052 Hz (smooth muscle autonomic innervation) frequency bands in elderly (60 years and older) T2DM and age-matched controls. We found a significant (p<0.01) difference in the PFC activation between elderly subjects with T2DM and age-matched elderly controls. Moreover, power spectral density (PSD) analysis revealed a significantly lower relative power in 0.021–0.052 Hz (smooth muscle autonomic innervation) frequency band in elderly subjects with T2DM during the Mini-Cog three-item recall test. Furthermore, a drop in the oscillatory power in the 0.01–0.02-Hz frequency band during Mini-Cog three-item recall test was found more pronounced in the elderly subjects with T2DM. Therefore, our study highlighted portable brain imaging to capture cerebrovascular reactivity to cognitive load that may provide a biomarker of cerebrovascular dysfunction in T2DM.Clinical Relevance— Our study establishes forehead portable brain imaging for monitoring cerebrovascular function in T2DM under cognitive load.

Vibration suppression in a field of frequencies and the creation of band gaps which do not allow the propagation of the waves is studied in this paper by means of microstructures designed through topology optimization. Topology optimization is formulated in frequency domain. Band gap design is based on Floquet-Bloch theory and genetic optimization. The result is appealing in view of modern 3D printing techniques.

The present work is focused on the numerical solution of the complete energy equation used in fluid film lubrication. The work was motivated by the fact the complete energy equation has no analytic solution that could be used for validations. Its accuracy and computation time are related to the employed numerical method and to the grid resolution. The natural discretization method (NDM) applied on different grids is systematically compared with the spectral method (the Lobatto Point Colocation Method or LPCM) with different polynomial degrees. A one dimensional inclined slider is used for the numerical tests and the energy equation is artificially decoupled from Reynolds. This approach enables to focus all the attention on the numerical solution of the energy equation. The results show that the LPCM is one or two orders of magnitudes more efficient than the NDM in terms of computation time. The energy equation is then coupled with Reynolds equation in a thermo-hydrodynamic analysis of the same 1D slider; the numerical results confirm again the efficiency of the LPCM. A thermo-hydrodynamic analysis of a two-lobe journal bearing is then presented as a practical application.

In this paper, we consider with a class of system of differential equations whose argument transforms are involution. In this an initial value problem for a differential equation with involution is reduced to an initial value problem for a higher order ordinary differential equation. Than either two initial conditions are necessary for a solution, the equation is then reduced to a boundary value problem for a higher order ODE.

The aim of this article is to extend the local as well as the semi-local convergence analysis of multi-point iterative methods using center Lipschitz conditions in combination with our idea, of the restricted convergence region. It turns out that this way a finer convergence analysis for these methods is obtained than in earlier works and without additional hypotheses. Numerical examples favoring our technique over earlier ones completes this article.

Indoor Positioning Systems (IPSs) are designed to provide solutions for location-based services. Wireless local area network (WLAN)-based positioning systems are the most widespread around the globe and are commonly found to have a ready-to-use infrastructure composed mostly of access points (APs). They provide useful information on signal strength to be processed by adequate location algorithms, which are not always capable of achieving the desired localization error only by themselves. In this sense, this paper proposes a new method to improve the accuracy of IPSs by optimizing some of their most relevant infrastructure components. Included are the arrangement of APs over the environment, the number of reference points (RPs), and the number of samples per location estimation test. A simulation environment is also proposed, in which the impact of key influencing factors on system accuracy is analyzed. Finally, a case study is simulated to validate an optimal combination of design parameters and its compliance with the requirements of localization error and the limited number of access points. Our simulation results clearly show that the desired localization accuracy, which is set as a goal, can be achieved while maintaining the factors already mentioned at minimal levels, which decreases both system deployment costs and computational effort.

Hydraulic conductivity is the key and one of the most uncertain parameters in groundwater modeling. The grid based numerical simulation require spatial distribution of sampled hydraulic conductivity at un-sampled locations in the study area. This spatial interpolation has been routinely performed using variogram based models (two-point geostatistics methods). These traditional techniques fail to capture the complex geological structures, provides smoothing effects and ignore the higher order moments of subsurface heterogeneities. In this work, a multiple-point geostatistics (MPS) method is applied to interpolate hydraulic conductivity data which will be further used in WASH123D numerical groundwater simulation model for regional smart groundwater management. To do this, MPS need ‘training images (TIs) as a key input. TI is a conceptual model of subsurface geological heterogeneity which was developed by using concept of ages, topographic slope as an index criteria and knowledge of geologist. After considerations of full physics of study area, an example shows the advantages of using multiple-point geostatistics compared with the traditional two-point geostatistics methods (such as Kriging) for the interpolation of hydraulic conductivity data in a complex geological formation.

The textbook analysis of vacuum energy density (VED) in flat spacetime follows from Pauli’s lectures of 1951, in which quantum vacuum is modeled as a reservoir of free harmonic oscillators. In his lectures, Pauli shows that deriving a nearly vanishing VED is contingent upon fulfilling three corollary conditions called polynomial-in-mass-constraints. The goal of this work is to evaluate Pauli’s constraints against the Standard Model parameters and the Higgs mechanism of spontaneous symmetry breaking.

This paper deals with the form, the stability character, the periodicity and the global behavior of solutions of the following four rational difference equations x_{n+1} = ((±1)/(x_{n}(x_{n-1}±1)-1)) x_{n+1} = ((±1)/(x_{n}(x_{n-1}∓1)+1)).

Even though materialistic atoms are having independent existence in this current accelerating universe, they are not allowing scientists and engineers to explore the secrets of gravity at atomic scale. This may be due to incomplete unification paradigm, inadequacy of known physics and technological difficulties etc. In this challenging scenario, one fundamental question to be answered is: Is Newtonian gravitational constant having a physical existence? We would like to suggest that, it’s a man created empirical constant and is having no physical existence. Clearly speaking, it’s not real but virtual. For understanding the secrets of large scale gravitational effects, scientists consider it as a physical constant. In the same way, each atomic interaction can be allowed to have its own gravitational constant. With further study, their magnitudes can be refined for a better understanding of the nature. Thinking in this way, we tried to fit the Newtonian gravitational constant. It’s estimated value seems to be 6.679855x10^(-11) m3/kg/sec2. Proceeding further, the famous radiation constants can be shown to be complex or secondary physical constants. By considering proton neutron stability, nuclear binding energy, nuclear charge radii, neutron life time, Fermi’s weak coupling constant and strong coupling constant, we are trying to understand the validity of the proposed three atomic gravitational constants. It needs further study.

The article introduces a new solution approach to grid-connected single-stage three-phase PV inverter whereby a dc-link voltage can successfully achieve the desired performance. As a single-stage, the variable output of perturb and observe maximum power point tracking (P&O based-MPPT) is fully utilized as dc-link voltage reference in inverter control scheme. As a result, it is challenging for the dc-link voltage to preserve energy balance by tracking its variable dc-link voltage reference under unpredictable environmental changes. To overcome this challenge, an adaptive reference proportional-integral (ARPI) controller, self-tuning, is designed and implemented to compel the dc-link voltage tracking its voltage reference to be equal as closely as possible; hence, the capability of the dc-link under abnormal events substantially guarantees the best energy balance and transient performance enhancement. To verify the validity of the method, simulation results for multiple events scenarios on 250 KW single-stage grid-connected PV systems show the effectiveness of the ARPI controller compared with PI controller.

Background: A malfunction of the innate immune response in COVID-19 is associated with eosinopenia particularly in more severe cases. This study tested the hypothesis that this eosinopenia is COVID-19 specific and is associated with systemic activation of eosinophils.. Methods: Blood of 15 healthy controls and 75 adult patients with suspected COVID-19 at the ER were included before PCR testing and analyzed by point-of-care automated flow cytometry (CD10, CD11b, CD16 and CD62L) in the absence or presence of a formyl peptide (fNLF). 45 SARS-CoV-2 PCR positive patients were grouped based on disease severity. PCR negative patients with proven bacterial (n=20) or other viral (n=10) infections were used as disease controls. Eosinophils were identified with the use of the FlowSom algorithm. Results: Low blood eosinophil numbers (<100 cells/microL; p<0.005) were found both in patients with COVID-19 and with other infectious diseases albeit less pronounced. Two discrete eosinophil populations were identified in healthy controls both before and after activation with fNLF based on the expression of CD11b. Before activation, the CD11bbright population consisted of 5.4% (CI95% = 3.8, 13.4) of total eosinophils. After activation, this population of CD11bbright cells comprised nearly half the population (42.21%, CI95% = 35.9, 54.1). Eosinophils in COVID-19 had a similar percentage of CD11bbright cells before activation (7.6%, CI95% = 4.5, 13.6), but were clearly refractory to activation with fNLF as a much lower percentage of cells end up in the CD11bbright fraction after activation (23.7%, CI95% = 18.5, 27.6; p<0.001). Conclusion: Low eosinophil numbers in COVID-19 are associated with refractoriness in responsiveness to fNLF, which is likely caused by migration of fully functional cells to the tissue. Such homing might be beneficial as eosinophils have been implicated in viral killing.

In this paper, we present a relapse based demonstrating way to deal with investigate various arrangement MTC information. A commonplace use of this displaying approach incorporates three stages: first, define a model that approximates the connection between quality articulation and trial factors, with boundaries consolidated to address the exploration premium; second, utilize least-squares and assessing condition methods to gauge boundaries and their relating standard blunders; third, register test insights, P-qualities and NFD as proportions of factual criticalness. The benefits of this methodology are as per the following. To begin with, it tends to the exploration interest in a particular, precise way, and maximally uses all the information and other important data. Second, it represents both orderly and irregular varieties related with the information, and the consequences of such examination give not just quality explicit data applicable to the exploration objective, yet additionally its dependability, in this way helping agents to settle on better choices for subsequent investigations. Third, this methodology is truly adaptable, and can undoubtedly be stretched out to different sorts of MTC considers or other microarray explores by detailing various models dependent on the test plan of the investigations.

This Paper intends to introduce the notion of prime ideals of Intuitionistic fuzzy normed Rings and to establish basic properties related to it. It investigates these notions and shown anew Result using intuinistic fuzzy points and non membership function incorparating with t-norm and s-norm to show aome results of fuzzy prime ideal.

Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient's unique anatomy. Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor.

It has become practically impossible to survey the literature on cells derived from adipose tissue with the aim to apply them in regenerative medicine. The aim of this review is to provide a jump start to understanding the potential of UA-ADRCs (uncultured, unmodified, fresh, autologous adipose derived regenerative cells isolated at the point of care) in regenerative medicine. We show that serious and adequate clinical research demonstrates that tissue regeneration with UA-ADRCs is safe and effective. ADRCs are neither 'fat stem cells' nor could they exclusively be isolated from adipose tissue, as ADRCs contain the same adult (depending on the definition) pluripotent or multipotent stem cells that are ubiquitously present in the walls of small blood vessels. Of note, the specific isolation procedure used has significant impact on the number and viability of the cells and hence on safety and efficacy of UA-ADRCs. Furthermore, there is no need to further separate adipose-derived stem cells (ASCs) from ADRCs if the latter were adequately isolated from adipose tissue. Most importantly, UA-ADRCs have the physiological capacity to adequately regenerate tissue without need for manipulating, stimulating and/or (genetically) reprogramming the cells for this purpose. Tissue regeneration with UA-ADRCs fulfills the criteria of homologous use.

In the present work we study the existence of solutions for hybrid nonlinear fractional integrodifferential equations. We developed an algorithm by using the operator theoretical techniques in order to obtain the approximate solutions. The main results depend on the Dhage iteration method that were incorporated with the modern hybrid fixed point theorems. The approximate solutions were obtained by using Lipschitz conditions and weaker form of mixed partial continuity. Further, we provide some examples to explain the hypotheses and the related results.

It is known that the class of p-normed spaces (0 < p ≤ 1) is an important generalization of usual normed spaces with rich topological and geometrical structure, but the most of tools and general principles in nature with nonlinearity have not been developed yet, thus the main goal of this paper is to develop tools for nonlinear analysis under the framework of p-vector spaces. In particular, we first develop the general fixed point theorems which provide solutions to answer Schauder conjecture since 1930’s in the affirmative for p-vector spaces when p = 1 (which is just general topological vector spaces); then the one best approximation result for upper semi-continuous mappings is given, which is used as a powerful tool to establish fixed points for non-self set-valued mappings with either inward or outward set conditions; and finally we establish comprehensive existence results of solutions for Birkhoff-Kellogg Problems, and the general principle of nonlinear alternative by including Leray-Schauder alternative and related results. The results given in this paper not only include the corresponding results in the existing literature as special cases, but also expected to be useful tools for the study of nonlinear problems arising from theory to practice.

Species distribution models have become tools of great importance in ecology since the advanced knowledge of suitable habitat of species is needed in the process of the world's biodiversity conservation. Models that use presence-only data are of great interests and are widely used in ecology due to their easy access. However, these models do not estimate accurately the true spatial species distribution based solely on presence-only data since they do not account for biases induced by the sampling techniques used and imperfect detection. To address this gap, Hierarchical integrated models have been recently introduced. Through this study, we assessed the relative performance of these new SDMs models using simulated data. The performance of the models was tested by comparing the estimates of parameters of the distribution models they provide with parameters used to simulate the distribution of the virtual species. The best model was the one whose estimates were close to the true distribution parameters of the virtual species. Results showed that analyzing Presence-only data in conjunction with Point-counts data through the Dorazio's Hierarchical model produced estimates of the coecients of the species intensity models with high precision and less bias while the Koshkina integrated model showed poor performance. Site-occupancy data, being not informative of species abundance, did not allow reducing biases in Presence-only data. The Dorazio's Hierarchical model produced estimates with high precision even with low detection probability. We have also found that the species rarity tends to in ate the variability of the models' estimates making modelling abundant species to be more accurate than modelling less abundant species. Hence, to model the species distribution with high precision based on Presence-only data, additional Point-counts data are required to account for sampling bias and imperfect detection.

The Equator Principle is the goal of promoting the harmonious development of my country's economy and society. It promotes the green transformation and upgrading of the industrial structure by strictly controlling the flow of commercial bank funds, so as to achieve the goal of environmental protection and the coordinated development of the national economy. This paper uses factor analysis to reduce the dimensions of 10 financial indicators and non-financial indicators that measure the operating performance and development potential of joint-stock commercial banks, and then compares the comprehensive operating performance, liquidity, and safety of Industrial Bank and comparable banks. And the level of profitability, analyze the difference in comprehensive operating performance of joint-stock commercial banks joining the Equator Principles compared with commercial banks that have not joined the Equator Principles. The results of the study found that joining the Equator Principles of joint-stock commercial banks can improve comprehensive operating performance in the short term. In the long run, the development trend of Industrial Bank will be similar to that of comparable banks in the same category. Joining the Equator Principles of Industrial Bank can improve its liquidity and profitability, but it will not in the long run. Conducive to the improvement of the asset quality of joint-stock commercial banks. In this regard, the government, enterprises and financial institutions should work together to help commercial banks achieve an effective balance between operating performance and social responsibility, so as to achieve the goals of "carbon peak" and "carbon neutral".

Determination of the presence in the blood of antibodies specific to the causative agent of a particular disease (serodiagnosis) is an effective approach in medical analytical chemistry. Serodiagnostics performed in the lateral flow immunoassay format (immunochromatography) meet the modern requirements for point-of-care testing and are supported by existing technologies of large-scale diagnostic tests production—thus raising increased attention in a tense epidemiological situation. For traditional lateral flow serodiagnostics formats, a large number of nonspecific immunoglobulins in the sample significantly reduces the degree of detectable binding. To overcome these limitations, an assay based on the formation of immobilized antigen— specific antibody—labeled antigen complexes detection was proposed. However, the requirements for its implementation, providing maximum sensitivity, have not been established. This article describes the mathematical model for the above assay. The influence of the ratio of reagent concentrations on the analysis results is considered. It is noted that the formation of specific antibody complexes with several labeled antigens is the main limiting factor in reducing the detection limit, and methods are proposed to minimize this factor. Recommendations for the choice of the assay conditions, following from the analysis of the model, are confirmed experimentally.

The Colebrook equation ζ is implicitly given in respect to the unknown flow friction factor λ ; λ=ζ(Re,ε*,λ) which cannot be expressed explicitly in exact way without simplifications and use of approximate calculus. Common approach to solve it is through the Newton-Raphson iterative procedure or through the fixed-point iterative procedure. Both requires in some case even eight iterations. On the other hand numerous more powerful iterative methods such as three-or two-point methods, etc. are available. The purpose is to choose optimal iterative method in order to solve the implicit Colebrook equation for flow friction accurately using the least possible number of iterations. The methods are thoroughly tested and those which require the least possible number of iterations to reach the accurate solution are identified. The most powerful three-point methods require in worst case only two iterations to reach final solution. The recommended representatives are Sharma-Guha-Gupta, Sharma-Sharma, Sharma-Arora, Džunić-Petković-Petković; Bi-Ren-Wu, Chun-Neta based on Kung-Traub, Neta, and Jain method based on Steffensen scheme. The recommended iterative methods can reach the final accurate solution with the least possible number of iterations. The approach is hybrid between iterative procedure and one-step explicit approximations and can be used in engineering design for initial rough, but also for final fine calculations.

Recent advances in open data initiatives allow us to free access to a vast amount of open LiDAR data in many cities. However, most of these open LiDAR data over cities are acquired by airborne scanning, where the points on façades are sparse or even completely missing due to the viewpoint and object occlusions in the urban environment. Integrating other sources of data, such as ground images, to complete the missing parts is an effective and practical solution. This paper presents an approach for improving open LiDAR data coverage on building façades by using point cloud generated from ground images. A coarse-to-fine strategy is proposed to fuse these two different sources of data. Firstly, the façade point cloud generated from terrestrial images is initially geolocated by matching the SFM camera positions to their GPS meta-information. Next, an improved Coherent Point Drift algorithm with normal consistency is proposed to accurately align building façades to open LiDAR data. The significance of the work resides in the use of 2D overlapping points on the outline of buildings instead of limited 3D overlap between the two point clouds and the achievement to a reliable and precise registration under possible incomplete coverage and ambiguous correspondence. Experiments show that the proposed approach can significantly improve the façades details of buildings in open LiDAR data and improving registration accuracy from up to 10 meters to less than half a meter compared to classic registration methods.

We consider Pisot family substitution tilings in $\R^d$ whose dynamical spectrum is pure point. There are two cut-and-project schemes(CPS) which arise naturally: one from the Pisot family property and the other from the pure point spectrum respectively. The first CPS has an internal space $\R^m$ for some integer $m \in \N$ defined from the Pisot family property, and the second CPS has an internal space $H$ which is an abstract space defined from the property of the pure point spectrum. However it is not known how these two CPS's are related. Here we provide a sufficient condition to make a connection between the two CPS's. In the case of Pisot unimodular substitution tiling in $\R$, the two CPS's turn out to be same due to [5, Remark 18.5].

Single-layer core corrugated sandwich panels generally consist of a corrugated core and two layers of panels, while multi-layer core corrugated sandwich panels are formed by stacking multiple layers of panels with multiple layers of core layers. In this study, integrated multilayer core corrugated sandwich panels with different shapes of corrugated cores (triangular, trapezoidal, and rectangular) and the different number of core layers were fabricated using 3D printing technology, and the mechanical behavior of such multilayer core corrugated sandwich panels under quasi-static three-point bending was investigated using experiments and numerical simulations. The effects of core shape and number of core layers on the bending deformation process, damage mode, load carrying capacity, and bending energy dissipation capacity of multilayer core sandwich panels are discussed. Parametric design of multilayer triangular core corrugated sandwich panels was also carried out by finite element software ABAQUS. It was found that a new multilayer corrugated sandwich panel with a multi-layer core is better than the single core shape multilayer corrugated sandwich panel in terms of bending load capacity, energy dissipation capacity and deformation capacity can be obtained through the combination design of different core shapes.

Tumor growth, progression, and therapy resistance are crucial factors in the prognosis of cancer. Properties of three-dimensional tumor-like organoids (tumoroids) more closely resemble in vivo tumors compared to two-dimensionally cultured cells and are therefore effectively used for assays and drug screening. We here established a repurposed drug for novel anticancer research and therapeutics using a tumoroid-based screening system. We screened 6 pharmacologically active compounds by using an original tumoroid-based multiplex phenotypic screening system with matrix metalloproteinase 9 (MMP9) promoter-driven fluorescence reporter for the evaluation of both tumoroid formation and progression. The effects of one of the hit compounds were examined on tumor formation and progression in vitro and in vivo. Antiparkinson drug benztropine was the most effective compound uncovered by the screen. Benztropine significantly inhibited in vitro tumoroid formation, cancer cell survival, and MMP9 promoter activity. Benztropine also reduced the activity of oncogenic signaling transducers and trans-activators for MMP9, including STAT3, NF-κB, and β-catenin, and properties of cancer stem cells / cancer-initiating cells. Benztropine and GBR-12935 directly targeted the dopamine transporter DAT/SLC6A3, whose genetic alterations such as amplification were correlated with poor prognosis for cancer patients. Benztropine also inhibited tumor growth, circulating tumor cell (CTC) number, and rate of metastasis in a tumor allograft model in mice. In conclusion, we propose the repurposing of benztropine for anticancer research and therapeutics that can suppress tumor progression, CTC, and metastasis of aggressive cancers by reducing key pro-tumorigenic factors.

This paper proposes a contact force controller for a constrained flexible manipulator in three-dimensional motion. This controller used the conversion formula obtained empirically and experimental results showed the effectiveness of the proposed contact force controller. First, the manipulator was operated with the tip of the second link restrained, then, time response of the root strain, joint angles and contact force were used to derive the relational between the three quantities. The effectiveness of the relational expression was verified by conducting a target contact force tracking experiment by inputting the angle from the relational expression. The contact force control using the strain feedback method was proposed with the strain amount estimated from the target contact force as the target value, and its effectiveness was verified by experiments. From the results obtained, controller using the strain feedback method was designed for the purpose of controlling the contact force at the tip of a flexible manipulator with two links and three degrees of freedom that performs three-dimensional spatial motion, and its effectiveness was shown by comparison with the contact force feedback method.

Coupled Delft3D-object model has been developed to predict object’s mobility and burial on sandy seafloor. The Delft3D model is used to predict seabed environment such as currents, waves (peak period, significant wave height, wave direction), water level, sediment transport, and seabed change, which are taken as the forcing term to the object model consisting of three components: (a) object‘s physical parameters such as diameter, length, mass, and rolling moment, (b) dynamics of rolling cylinder around its major axis, and (c) empirical sediment scour model with re-exposure parameterization. The model is compared with the observational data collected from a field experiment from 21 April to 23 May 2013 off the coast of Panama City, Florida funded by the Department of Defense Strategic Environmental Research and Development Program. The experimental data contain both objects’ mobility using sector scanning and pencil beam sonars and simultaneous environmental time series data of the boundary layer hydrodynamics and sediment transport conditions. Comparison between modeled and observed data clearly show the model capability.

Background: Reelin is a large extracellular glycoprotein secreted by Cajal–Retzius cells and has a main role during brain development, especially in neuronal migration. Reelin is comprised of N-terminal F-spondin like domain, eight tandem repeats, and a highly conserved basic C-terminal region (CTR). The CTR main role in the secretion of Reelin has been investigated by advertently inducing deletion in whole or a part of this region; however, the role of CTR point mutations on the secretion of Reelin is shrouded in mystery. Materials and Methods: In this study, we performed experimental analyses on a subregion of Human Reelin containing 5th and 6th repeats (R5-R6), a part of 8 th repeat and the CTR which were amplified from cDNA of K562 and HEPG2 cells and cloned into a mammalian expressional plasmid (pVP22/myc-His). Bioinformatics investigation was performed on the CTR at both level of nucleotide and amino acid as well as mutant type. Random mutagenesis by error-prone PCR method was utilized to induce mutation in the CTR. The secretion efficiency of recombinant wild-type and mutant Reelin constructs compared in cell lysate and supernatant isolated from the transiently transfected HEK 293T cells using 6XHistag ELISA method. Results: In-vitro study demonstrated that the CTR alteration(S3440P) leads to impairment of Reelin secretion even after overexpression. Conclusions: Our results indicate that S3440P substitution in highly conserved structure of the CTR has an important effect on Reelin secretion.

Current pharmacological treatments of Fibromyalgia (FM) are merely symptom palliative, as clinical trials have so far failed to provide overall benefits without associated harms. Polypharmacy often leads to patient´s health deterioration and chronic drug use to an eventual lack of patient´s response. Emerging evidence support that physiotherapy treatments based on mechanical triggers improve FM symptoms and therefore could be used for therapeutic purposes by themselves, or in combination with current pharmacological treatments, as part of integrative medicine programs. However, a paucity of studies rigorously and systematically evaluating this possibility exists. This study uses scores from validated standardized questionnaires, algometer pressure point threshold (PPT) readings and responses from a custom self-developed questionnaire to determine the impact of a pressure-controlled manual protocol on FM hyperalgesia/allodynia, fatigue and patient´s quality of life. The results show that patient´s baseline sensitivity to pain inversely correlates with treatment response in FM. Moreover, patients presenting comorbid ME/CFS do not seem to respond to the applied therapy as those presenting FM only. Thus, pre-treatment PPTs and ME/CFS comorbidity may serve as indicators to predict patient´s response to physiotherapy programs based on mechanical triggers, as the one evaluated here. These unexpected findings grant further explorations including the study of gene expression profiles associating to patient´s treatment response in the blood collection of samples generated by this study.

This research is aimed at determining the characteristics of the current level of entrepreneurial potential of the Three Seas Initiative (3SI) countries, the ability to overcome the consequences of extraordinary events, such as COVID-19 and prospects for the return to an accelerated development once the destabiliser of the economic system, the coronavirus pandemic, has ceased. Eurostat, World Bank and the World Economic Forum data for 2015-2019 were used for the purpose of the research. The research was divided into three stages, i.e. assessment of economic development on the basis of a synthetic ratio of economic anchor development, for which a relative benchmark method based on spatial median (so-called L1 median or Weber point) was used, identification of conditions for the development of entrepreneurial capacity and statistical analysis showing the correlation between economic anchor measures and selected factors of the 3SI countries economic development. Our study found that the entrepreneurial capacity of the 3SI countries in 2015-2019 was determined by nine characteristics, belonging to six areas, i.e. local economy, demographic situation, social situation, trade exchange, innovation and tourism economy. The entrepreneurial potential of the 3SI countries was spatially diversified, and its development was determined, among others, by the entrepreneurial activity of residents (entrepreneurship index) and the conditions for running a business.

This work presents a control scheme to control the grid-connected single-phase photovoltaic (PV) system. The considered system has four 250W solar panels, a non-inverting buck-boost DC-DC converter, and DC-AC inverter with LCL filter. The control system aims to track and operate at the maximum power point (MPP) of PV panels, regulate the voltage of DC link, and supply the grid with a unity power factor. To well achieve these goals, the proposed control system consists of three parts, that are MPP tracking controller module with a fuzzy-based modified incremental conductance (INC) algorithm, a DC-link voltage regulator with a hybrid fuzzy proportional-integral (PI) controller, and a Current Controller module using the linear quadratic regulator (LQR) for grid-connected power. Based on fuzzy control and LQR, this work introduces a full control solution for grid-connected single-phase PV systems. The key novelty of this research is to analyze and prove that the newly proposed method is more successful in numerous aspects by comparing and evaluating the previous and present control methods. The designed control system settles quickly, which is critical for output stability. In addition, as compared to backstepping approach used in our past study, the LQR technique is more resistant to sudden changes and disturbances. Furthermore, backstepping method produces the larger overshoot, which has a detrimental impact on efficiency. Simulation findings under various weather conditions were compared to theoretical ones to indicate that the system can deal with variations in weather parameters.

A single qubit may be represented on the Bloch sphere or similarly on the 3-sphere S3. Our goal is to dress this correspondence by converting the language of universal quantum computing (UQC) to that of 3-manifolds. A magic state and the Pauli group acting on it define a model of UQC as a positive operator-valued measure (POVM) that one recognizes to be a 3-manifold M3. More precisely, the d-dimensional POVMs defined from subgroups of finite index of the modular group PSL(2, Z) correspond to d-fold M3- coverings over the trefoil knot. In this paper, one also investigates quantum information on a few ‘universal’ knots and links such as the figure-of-eight knot, the Whitehead link and Borromean rings, making use of the catalog of platonic manifolds available on the software SnapPy. Further connections between POVMs based UQC and M3’s obtained from Dehn fillings are explored.

The use of spirocycles in drug discovery and medicinal chemistry has been booming in the last two decades. This has clearly translated in the landscape of approved drugs. Among two dozen clinically used medicines containing a spirocycle, 50% have been approved in the 21st century. The present review focuses on the notable synthetic routes to such drugs invented in industry and academia and is intended to serve as a useful reference source of synthetic as well as general drug information for researchers engaging in the design of new spirocyclic scaffolds for medicinal use or embarking upon analog syntheses inspired by the existing approved drugs.

Using a theorem of Ulam and Hyers, we will prove the Hyers-Ulam stability of two-dimensional Lagrange's mean value points $(\eta, \xi)$ which satisfy the equation, $f(u, v) - f(p, q) = (u-p) f_x(\eta, \xi) + (v-q) f_y(\eta, \xi)$, where $(p, q)$ and $(u, v)$ are distinct points in the plane. Moreover, we introduce an efficient algorithm for applying our main result in practical use.

The akimotoite--majorite--bridgmanite (Ak--Mj--Bm) triple point in MgSiO3 has been measured in large-volume press (LVP; COMPRES 8/3 assembly) and laser-heated diamond anvil cell (LHDAC). For the LVP data, we calculated pressures from the calibration by Leinenweber (2012). For the LHDAC data, we conducted \textit{in situ} determination of pressure at high temperature using the Pt scale by Dorogokupets and Dewaele (2007) at synchrotron. The measured temperatures of the triple point are in good agreement between LVP and LHDAC at 1990-2000 K. However, the pressure for the triple point determined from the LVP is 3.9+/-0.6~GPa lower than that from the LHDAC dataset. The triple point determined through these experiments will provide an important reference point in the pressure-temperature space for future high-pressure experiments and allow mineral physicists to compare the pressure--temperature conditions measured in these two different experimental methods.

In this article, we introduce a relatively new concept of multi-valued (θ;R)-contractions and utilize the same to prove some xed point results for a new class of multi-valued mappings in metric spaces endowed with an amorphous binary relation. Illustrative examples are also provided to exhibit the utility of our results proved herein. Finally, we utilize some of our results to investigate the existence and uniqueness of a positive solution for the integral equation of Volterra type.

This paper aims to introduce the notions of various types of Qc-contractions for which we establish some fixed circle and fixed disc theorems in the setting of metric spaces. Some illustrative examples are also provided to support our results. Moreover, we present some fixed circle and fixed disc results of integral type contractive self-mappings.

Theoretical analysis into the energetics of a novel putative electromagnetic field propulsion device by the author, found that it was able to impart momenergy to the ground state of the electromagnetic field; some rest-energy of the craft was converted to kinetic energy of the craft. Electrical analysis showed that the propulsor was always a net electrical load – if the device accelerated from one frame, then deaccelerated to the original frame, both processes would consume electrical work. The aim of this paper is to look further into this sinking of high-grade electrical energy into the field ground state and to show that an even more pernicious form of 2^nd Law of Thermodynamics exists.

The first objective of this paper is to investigate the scaling behavior of liquid-vapor phase transition in FCC and BCC metals starting from the zero-temperature four-parameter formula for cohesive energy. The effective potentials between the atoms in the solid are determined using lattice inversion techniques as a function of scaling variables in the above formula. These potentials are split into repulsive and attractive parts as per the Weeks-Chandler-Anderson prescription, and used in the coupling-parameter expansion for solving the Ornstein-Zernike equation supplemented with an accurate closure. Thermodynamic quantities obtained via the correlation functions are used to obtain critical point parameters and liquid-vapor phase diagrams. Their dependence on the scaling variables in the cohesive energy formula are also determined. Equally important second objective of the paper is to revisit coupling parameter expansion for solving the Ornstein-Zernike equation. The Newton-Armijo non-linear solver and Krylov-space based linear solvers are employed in this regard. These methods generate a robust algorithm that can be used to span the entire fluid region, except very low temperatures. Accuracy of the method is established by comparing the phase diagrams with those obtained via computer simulation. Avoidance of the 'no-solution-region' of Ornstein-Zernike equation in coupling-parameter expansion is also discussed. Details of the method and the complete algorithm provided here would make this technique more accessible to researchers investigating thermodynamic properties of one component fluids.

Full waveform (FW) LiDAR holds great potential for retrieving vegetation structure parameters at a high level of detail, but this prospect is constrained by practical factors such as lack of available handy processing tools and technical intricacy of waveform processing. This study introduces a new product, named the Hyper Point Cloud (HPC) derived from FW LiDAR data, and explore its potential applications such as tree crown delineation using the HPC-based intensity and percentile height (PH) surfaces, which show a promising solution to the constraints of using FW LiDAR data. Results of the HPC present a new direction to handle FW LiDAR data and offer prospects for studying the mid-story and understory of vegetation with high point density (~ 182 points/m2). The intensity-derived digital surface model (DSM) generated from the HPC shows that the ground region has larger maximum intensity (MAXI) and mean intensity (MI) than the vegetation region while having smaller total intensity (TI) and number of intensities (NI) at the given grid cell. Our analysis of intensity distribution contours at individual tree level exhibit similar patterns, indicating that the MAXI and MI are decreasing from the tree crown center to tree boundary while a rising trend is observed for TI and NI. These intensity variable contours provide a theoretical justification for using HPC-based intensity surfaces to segment tree crowns and exploit their potential for extracting tree attributes. The HPC-based intensity surfaces and the HPC-based PH Canopy Height Models (CHM) demonstrate promising tree segmentation results comparable to the LiDAR derived CHM for estimating tree attributes such as tree locations, crown widths and tree heights. We envision that products such as the HPC and the HPC-based intensity and height surfaces introduced in this study can open new perspectives to use FW LiDAR data and alleviate the technical barrier of exploring FW LiDAR data for detailed vegetation structure characterization.

Studying the two famous old problems that why the moon can move around the Sun and why the orbit of the Moon around the Earth cannot be broken off by the Sun under the condition that calculating with F=GMm/R^2, the attractive force of the Sun on the Moon is almost 2.2 times that of the Earth. We found that the planet and moon are unified as one single gravitational unit which results in that the Sun cannot have the force of F=GMm/R^2 on the moon. The moon is moved by the gravitational unit orbiting around the Sun. It could indicate that the gravitational field of the moon is limited inside the unit and the gravitational fields of both the planet and moon is unified as one single field interacting with the Sun. The findings are further clarified by reestablishing Newton’s repulsive gravity.

Researchers in different disciplines studied liver’s genetic expression of organogenesis in embryogenesis; however, organogenesis has not been studied as an independent and a complementary process during adult liver regeneration. This paper reviewed studies and extracted information related to organogenesis in adult liver regeneration because of organogenesis’ important role in cancer and tissue regeneration.

Digital Twin Cities (DTCs) play a fundamental role in city planning and management. They allow three-dimensional modeling and simulation of cities. 3D semantic segmentation is the foundation for automatically creating enriched DTCs, as well as their updates. Past studies indicate that prior level fusion approaches demonstrate more promising precisions in 3D semantic segmentation compared to point level fusion, features level fusion, and decision level fusion families. In order to improve point cloud enriched semantic segmentation outcomes, this article proposes a new approach for 3D point cloud semantic segmentation through developing and benchmarking three prior level fusion scenarios. A reference approach based on point clouds and aerial images was proposed to compare it with the different developed scenarios. In each scenario, we inject a specific prior knowledge (geometric features,classified images ,etc) and aerial images as attributes of point clouds into the neural network’s learning pipeline. The objective is to find the one that integrates the most significant prior knowledge and enhances neural network knowledge more profoundly, which we have named the "smart fusion approach". The advanced Deep Learning algorithm "RandLaNet" was adopted to implement the different proposed scenarios and the reference approach, due to its excellent performance demonstrated in the literature. The introduction of some significant features associated with the label classes facilitated the learning process and improved the semantic segmentation results that can be achievable with the same neural network alone. Overall, our contribution provides a promising solution for addressing some challenges, in particular more accurate extraction of semantically rich objects from the urban fabric. An assessment of the semantic segmentation results obtained by the different scenarios is performed based on metrics computation and visual investigations. Finally,the smart fusion approach was derived based on the obtained qualitative and quantitative results.

Multispectral remote sensing data may contain component images which are heavily corrupted by noise and pre-filtering (denoising) procedure is often applied to enhance these component images. To do this, one can use reference images – component images having relatively high quality and which are similar to the image subject to pre-filtering. Here we study the following problems: how to select component images that can be used as references (e.g., for the Sentinel multispectral remote sensing data) and how to perform the actual denoising. We demonstrate that component images of the same resolution as well as component images of a better resolution can be used as references. Examples of denoising of real-life images demonstrate high efficiency of the proposed approach.

Advancement in physics often results from analyzing numerical data and then creating a theoretical model that can explain and predict those data. In the field of lens design, the reverse is true: longstanding theoretical understanding is being overtaken by more powerful numerical methods.

In the paper, an improved smart meter data-based three-stage algorithm to calculate the power/energy losses in the three-phase networks with the voltage level below 0.4 kV (low voltage - LV) is presented. In the first stage, a loading function of input data was built having as main feature the working at the same time with files from the database of smart metering system (SMS) containing the hourly electricity records, and files including the characteristic load profiles established by the Distribution Network Operator (DNO) for the consumers with standard energy meters depending the following factors: consumption class, day and season. In the second stage, a function which is based on the work with the structure vectors was implemented to identify easy the configuration of analysed networks. In the third stage, an improved version of forward/backward sweep-based algorithm was proposed to calculate fast the power/energy losses to three-phase LV distribution networks in balanced and unbalanced regime. A real LV rural distribution network from a pilot zone belonging to a Distribution Network Operator (DNO) from Romania was used to confirm the accuracy of the proposed approach. The comparison with the results obtained using the DigSilent PowerFactory Simulation Package certified the performance of the algorithm, the mean absolute percentage error (MAPE) being 0.94%.

Despite increased awareness of and attention to the need for sustainable agriculture, fertilizers and compost application in excess of crop requirements remain common agricultural practices in South Korea, causing eutrophication of freshwater and coastal ecosystems. In this study, a phosphorus (P) budget was developed to quantify P inputs, outputs, and retention in a forested- agricultural watershed. The P budget showed that chemical fertilizers and organic compost were the largest source of P (97.6% of the total) followed by atmospheric deposition (2.1% of the total P), whereas forest export (0.2% of the total) and sewage treatment plants (STPs) (0.1% of the total) were negligible. The dominant P outputs were crop harvesting and hydrologic export to surface water. The P balance showed a significant accumulation of P in the watershed; approximately 87% of the total P input was retained in the soils within the watershed. However, P concentrations in drainage water were still high enough to cause eutrophication of downstream reservoirs. The results provide useful information on the proportion of P export and retention in soils and will help support efforts to improve water quality and design better management of agricultural non-point source pollution.

To improve the effect of multi-point stretch forming of sheet metal, it is proposed in this paper to replace fixed ball head with swinging ball head. According to the multi-point dies with different arrangements, this research establishes the finite element models of the following stretch forming, i.e. fixed ball heads with conventional arrangement, swinging ball heads with conventional arrangement, swinging ball heads with declining staggered arrangement, and swinging ball heads with parallel staggered arrangement and then numerical simulation is performed. The simulation results show that by replacing fixed ball head with swinging ball head, the surface indentation of the formed part was effectively suppressed, the stress and tension strain distribution of the formed part was improved and the forming quality was improved; that the thickness of the elastic pad was reduced, the springback was reduced and the forming accuracy was improved; and that when the ball head was applied to multi-point die with staggered arrangement, better forming result was achieved, where the best forming result was achieved in combining the swinging ball heads with the multi-point die with parallel staggered arrangement. The forming experiments were carried out, and the experimental results were consistent with the trend of numerical simulation results, which verified the correctness of the numerical simulation.

This paper introduces a model-free, "on-the-fly" learning control strategy for arrays of energy converters with adjustable generator damping. The devices are arranged so that they are affected simultaneously by the energy medium. Each device uses a different control strategy, of which at least one has to be the machine learning approach presented in this paper. During operation all energy converters record the absorbed power and control output; the machine learning device gets the data from the converter with the highest power absorption and so learns the best performing control strategy for each state. Consequently, the overall network has a better overall performance than each individual strategy. This concept is evaluated for wave energy converter (WEC) with numerical simulations and experiments with physical scale models in a wave tank. In the first of two numerical simulations, the learnable WEC works in an array with four WECs applying a constant damping factor. In the second simulation, two learnable WECs were learning with each other. It showed that in the first test the WEC was able to absorb as much as the best constant damping WEC, while in the second run it could absorb even slightly more. During the physical model test, the ANN showed its ability to select the better of two possible damping coefficients based on real world input data.

TThe number of supermarkets offering a grocery delivery has been increasing during the last years. Many studies deduce CO₂ emission savings using this concept. Since the delivery of groceries also consumes energy and produces emissions, break-even points can be calculated, from where the delivery has environmental advantages compared to the customer pickup. In this paper, influences of differing vehicle use on break-even points for savings of energy and CO₂ emissions are analyzed for the case of Haidhausen Süd, a city district of Munich in Germany. Internal combustion engine and electric vehicles are investigated to depict current as well as future trends. After an introduction to the used methodology, the potential to save energy and CO₂ emissions related to the delivery of groceries in the chosen district of Munich is evaluated. Afterwards, influences on the break even points are presented and discussed. As the results show, a delivery of groceries leads to energy and carbon dioxide savings in a wide range of private vehicle use for grocery shopping trips. Nevertheless, if the complete customer vehicle fleet is electrified, the use of delivery vehicles with an internal combustion engine can cause an additional environmental impact at the current modal split for shopping trips in Germany.

Flow and transport processes in soil and rock play a critical role in agricultural non-point source pollution (ANSP) loads. In this study, we investigated the ANPS load discharged into rivers from an irrigation district in the Tibetan Plateau, and simulated ANPS load using a distributed model involving detailed descriptions of flow and ANPS transport and transformation processes in the soil and rock. Experiments were conducted for two years to measure soil water content and nitrogen concentrations and the quality and quantity of lateral flow in the rock and at the drainage canal outlet during the highland barley growing period. A distributed model, in which the subsurface lateral flow was described using a step-wise method, was developed to simulate flow and ammonium nitrogen and nitrate nitrogen transport. Sobol’s method was used to evaluate the sensitivity of simulated flow and transport processes to model inputs. The results showed that, with a 21.2% increase of rainfall and irrigation in the highland barley growing period, the average NH4+-N and NO3--N concentrations in the soil layer decreased by 10.8% and 14.3%, respectively, due to increased deep seepage. Deep seepage of rainfall water accounted for 0–52.4% of total rainfall, whereas deep seepage of irrigation water accounted for 36.6–45.3% of total irrigation. NH4+-N and NO3--N discharged into the drainage channel represented 19.9–30.4% and 19.4–26.7% of the deep seepage, respectively. The mean Nash-Sutcliffe coefficients, root mean square errors, and cumulative deviations between the measured and simulated flow rates and NH4+-N and NO3--N concentrations at the surface drainage canal outlet were 0.694, 0.081, and 0.242, respectively, indicating that the proposed method can effectively describe the hydrological and ANPS pollution migration in the plateau irrigation zone. The Sobol’ sensitivity analysis results demonstrated that subsurface lateral flow had the most important first order and total effect on the simulated flow and NH4+-N and NO3--N concentrations at the surface drainage outlet.

This study presents established methods, along with new algorithmic developments, to automate the point cloud processing within the Field Information Modeling (FIM)™ framework. More specifically, given an n-D designed information model, and the point cloud’s spatial uncertainty, the problem of automatic assignment of the point clouds to their corresponding elements within the designed model is considered. The methods addressed two classes of field conditions, namely, (i) negligible construction errors; and (ii) existence of construction errors. The emphasis was given to describing and defining the assumptions in each method and shed light on some of their potentials and limitations in practical settings. Considering the shortcomings of current point cloud processing frameworks, three new and generic algorithms were developed to help solve the point cloud to model assignment in field conditions with both negligible, and existence (or speculation) of construction errors. The effectiveness of the new methods was demonstrated in real-world point clouds, acquired from construction projects, with promising results.