Self-administered pre-participation screening for physical activity (PA) requires an instrument that should be easily used and identify individuals at high risk. The Physical Activity Readiness Questionnaire (PAR-Q+) has been used for many years. Its ease of use and ability to identify those not fit to undergo PA has not been assessed. This study was to determine the rates of the PAR-Q+ in identifying adults who may not be fit for moderate or intense PA and obtain feedback on the use of this tool. A public on-line voluntary survey on the PAR-Q+ was carried out obtaining participants’ bio-characteristics, them completing the PAR-Q+ form and providing feedback. With 1019 participants, about 57.8% engaged in at least 150 minutes of PA weekly. This decreased with increasing number of co-morbidities. Increasing age was associated with more co-morbidities. About 33.1% of the participants using the PARQ+ would have required further medical evaluation. Only 3 of the 7 main PAR-Q+ questions were easily understood. Difficulties were encountered with 39 of the 44 follow-up questions, especially amongst those with co-morbidities. The large number of technical terms was also a source of concern. The PAR-Q+ would need extensive simplification before it may be recommended for use.

Despite its growing importance as a dry beneficiation method, there is a lack of studies exploring the fundamentals aspects of dry jigging. In this sense, this study focuses on explore some essential aspects of density-based separation in dry jigs, like pulse profile, energy consumption and, especially, stratification over time, also exploring an innovative operational strategy here called “transient pulsation”. The tests were carried out using density tracers distributed across 11 density ranges (0.4-2.4 g/cm³) and employing a base bed (gravel) to analyze their segregation in a pilot-scale dry jig. Pressure drop and active power data were acquired to measure the pulse characteristics and energy consumption. The findings suggest that establishing the dry jigging cycle is more complex than in hydraulic jigs due to the compressibility of air. Stationary pulsation tests revealed an unstable behavior of stratification over time, contrasting with traditional hydraulic jigs, while transient pulsation tests unveiled varied trends in separation quality. Energy consumption analysis underscored the significant role of the blower drive. These insights have the potential to inform operational enhancements in dry jigging.

While the simple model of the total atmospheric carbon sink effect as a linear function of concentration has provided excellent prediction results, several problems remained to be investigated and solved. The most obvious open issue is the correct treatment of land use change emssions. It turns out that the model improves by mostly neglecting them after 1959. This effectively implies that land use change emissions have been constant and small since then. The key investigation starts with the observation, that the total carbon sink has a short term component which be explained by temperature changes commonly known as El Nin˜o. The apparent paradox is analysed and explained, why contrary to the short term changes no temperature caused trend can be detected in the model, despite the fact that several contributing processes exhibit temperature dependency. The result of this analysis leads to the model extension, where the total effect of sinks and natural emissions are a linear function of concentration and temperature. This model not only explains current measurements but also paleo climate from ice-core time series.

Scaffold guided breast tissue regeneration (SGBTR) can both transform reconstructive and cosmetic breast surgery. Implant-based surgery is the most common method. However, there are inherent limitations as there is replacement of tissue rather than regeneration. Regenerating autologous soft tissue has the potential to provide a more like-for-like reconstruction with minimal morbidity. Our SGBTR approach regenerates soft tissue by implanting additively manufactured bioresorbable scaffolds filled with autologous fat graft. A pre-clinical large animal study was conducted implanting 100 ml breast scaffolds (n=55) made from medical-grade polycaprolactone in 11 minipigs for 12 months. Various treatment groups were investigated where immediate or delayed autologous fat graft, as well as platelet rich plasma were added to scaffolds. Computed Tomography and Magnetic Resonance Imaging was performed on explanted scaffolds to determine volume and distribution of regenerated tissue. Histological analysis was performed to confirm tissue type. At 12 months we were able to regenerate and sustain a mean soft tissue volume of 60.9 4.5 ml (95% CI) across all treatment groups. There was no evidence of capsule formation. There were no immediate or long-term post-operative complications. In conclusion, we were able to regenerate clinically relevant soft tissue volumes utilizing SGBTR in a pre-clinical large animal model.

The approach to the personal experience and previous ideas about Physical Education of future Primary Education teachers is a starting point of great interest for the teaching of the subject of Didactics of Physical Education. The study aims to investigate these prior beliefs and to verify to what extent this initial perception changes after taking the course on “Didactics of Physical Education”. A concurrent mixed-methods study was conducted, which included two data collection procedures: (1) a pre-experimental design with a single group featuring pre-test and post-test; (2) the analysis of students' autobiographical accounts of their school experience with physical education. The participants were students enrolled in the Bachelor’s degree program in Primary Education at the University of Santiago de Compostela (USC) who undertook the course last year. The results obtained reveal that after taking the subject of Didactics of Physical Education, students give greater value to more positive concepts of learning, socializing, participating, and playing, among others. Similarly, in the post-test, the assessment of concepts such as competitiveness and physical fatigue diminished. In their autobiographical memories, students associate good memories with relationships with classmates and the playful and socializing nature of the subject; and among the bad memories, they highlight the content related to physical performance, competitiveness, and lack of attention to the diversity of students and their individual characteristics.

The effect of H2S with high concentrations on catalytic dry reforming of methane (DRM) process has seldom been focused on previously. Herein, a thermodynamic analysis of the DRM reactions in the presence of H2S with the concentration varying in 0-20 vol% was conducted firstly. Several typical types of catalysts including MgO, NiO/MgO and LaNiO3 in different states were prepared for executing DRM at 800 C, 0.1 MPa in the feed of 20 vol% CO2 and 20 vol% CH4 balanced with N2. The catalytic performance of each catalyst for DRM process under conditions of absence and presence of H2S was compared. A promotion effect of increasing H2S concentration on both the conversions of CO2 and CH4 and the molar yields of CO and H2 was observed on all the catalysts especially the MgO and the pristine NiO/MgO. While a significant decline in catalytic activity of either the reduced NiO/MgO or the reduced LaNiO3 catalyst after adding H2S, moderate reactant conversions still sustained. The results of process analysis and catalyst structure characterization suggest that H2S participation can contribute to the increment in CO2 and CH4 conversion, and active S-adsorbed species may play the key role of catalysis in the reactions involving H2S.

Semenov-Tian-Shansky has introduced the modified classical Yang-Baxter equation, which is called the modified $r$-matrix. Relevant studies have been extensive in recent times. This paper is devoted to study cohomology theory of modified Rota-Baxter pre-Lie algebras and its applications. First we introduce the concept and representations of modified Rota-Baxter pre-Lie algebras. We then develop the cohomology of modified Rota-Baxter pre-Lie algebras with coefficients in a suitable representation. As applications, we consider the infinitesimal deformations, abelian extensions and skeletal modified Rota-Baxter pre-Lie 2-algebra in terms of lower degree cohomology groups.

The present study analyzed the effect of temperature, pH, retention time, pretreatment and mixing ratio on the anerobic digestion process. The parameters during the anaerobic co digestion of cow manure and food waste were then optimized using the Taguchi experimental design method. ANOVA is carried out to find the significant parameters which influence the biogas production. Experimental tests were carried out at laboratory scale reactors kept at different temperatures (28 °C, 35 °C, and 50 °C). The specific methanogenic Performance (SMP) during anerobic digestion at higher temperatures was characterized with the analysis of acetate, propionate, butyrate, hydrogen, glucose, and formate. The improvement of biogas production with different pre-treatment i.e., ultrasonic, autoclave, and microwave techniques also analysed. The results showed that reactor that maintained at 35 °C showed the highest biogas production. While the reactor that maintained at lower temperature (28 °C) produced the lower volume of biogas. As the retention time increases, the amount of biogas produced increases. Methanogenic activities of microorganisms reduced at higher temperature conditions (65 °C). Biogas production increased by 28.1%, 20.23%, and 13.27 % when the of substrates treated with ultrasonic, autoclave, and microwave, respectively, compared to the untreated substrate. The optimized condition for the highest biogas production during anaerobic co digestion of food waste and cow manure is temperature of 35 °C, pH of 7 and mixing ratio (CM: FW=1.5:0.5). ANOVA showed that temperature is the most important input parameter affecting biogas production, followed by mixing ratio.

Hypertensive diseases of pregnancy (HDP) represent a global clinical challenge, affecting 5-10% of women and leading to complications for both maternal well-being and fetal development. At the heart of these complications is endothelial dysfunction, with oxidative stress emerging as a pivotal causative factor. The reduction in nitric oxide (NO) bioavailability is a vital indicator of this dysfunction, culminating in blood pressure dysregulation. In the therapeutic context, although antihypertensive medications are commonly used, they come with inherent concerns related to maternal-fetal safety, and a percentage of women do not respond to these therapies. Therefore, alternative strategies that directly address the pathophysiology of HDP are required. This article focuses on the potential of the nitrate-nitrite-NO pathway, abundantly present in dark leafy greens and beetroot, as an alternative approach to treating HDP. The objective of this review is to discuss the prospective antioxidant role of nitrate. We hope our discussion paves the way for using nitrate to improve endothelial dysfunction and control oxidative stress, offering a potential therapy for managing HDP.

This study aimed to determine whether the EQ-5D-5L tool captures the most common persistent symptoms, such as fatigue, memory/concentration problems and dyspnea in patients with post COVID-19 conditions, and if adding these symptoms improves the explained variance of the health-related quality of life (HRQoL). In this exploratory cross-sectional study, two cohorts of Swedish patients (n=177) with a history of COVID-19 infection answeared a questionnaire covering sociodemographic characteristics, clinical factors and HRQoL assessed using EQ-5D-5L with the Visual Analogue Scale (EQ-VAS). Spearman rank correlation and multiple regression analyses were employed to investigate the extent to which the most common persistent symptoms such as fatigue, memory/concentration problems and dyspnea were explained by the EQ-5D-5L. The explanatory power of EQ-5D-5L for EQ-VAS was also analysed, both with and without inclusion of symptom(s). We found that the EQ-5D-5L dimensions partly captured fatigue and memory/concentration problems but performed poorly in capturing dyspnea. Specifically, the EQ-5D-5L explained 55% of the variance in memory/concentration problems, 47% in fatigue and only 14% in dyspnea. Adding fatigue to the EQ-5D-5L increased the explained variance of the EQ-VAS by 5.7%, while the addition of memory/concentration problems and dyspnea had a comparatively smaller impact on the explained variance. Our study highlights the EQ-5D-5L’s strength in capturing fatigue and memory/concentration problems in post COVID-19 patients. However, it also underscores the challenges in assessing dyspnea in this group. Fatigue emerged as a notably influential symptom, significantly enhancing the EQ-5D-5L's predictive ability to for the EQ-VAS score in these patients.

Background: Open AI developed ChatGPT, a language model based on the GPT architecture, designed for text-based communication. Trained on diverse internet texts, ChatGPT generates contextually appropriate responses using machine learning. It understands input through analysis and context interpretation, generating coherent and contextually relevant responses. Interaction is possible through messaging platforms. Materials and Methods: In November 2023, we utilized ChatGPT 3.5, the default version at that time, to answer questions from the Italian National Residency Program Admission Tests (SSMs) of 2021, 2022, and 2023. The questions cover clinical, diagnostic, analytical, therapeutic, and epidemiological scenarios, sometimes accompanied by images. The study compared ChatGPT's answers to the official corrections on the Italian Ministry of University and Research (MUR) website. The scoring method used for evaluation was 1 point for correct answers, 0 points for unanswered questions, and -0.25 points for incorrect answers, reflecting the SSM test scoring system. Results: In summary, ChatGPT was tested with a total of 420 questions, 140 for each test. It achieved an overall accuracy of 80.48%, providing correct answers for 338 questions and incorrect answers for 82 questions. When faced with questions containing both text and images, it answered 55% correctly and 45% incorrectly. The model's performance varied over time, with an 82.14% accuracy rate in 2021 and 2022 (115 correct out of 140) and a 77.14% accuracy rate in 2023 (108 correct out of 140). Applying thisscoring method to the SSM test, ChatGPT would have scored 105 points in 2021 and 2022, and 100 points in 2023. Conclusions: ChatGPT has exhibited above-average performance in the last three SSM tests, highlighting its robust capability to interpret clinical scenarios and offer precise diagnostic and therapeutic guidance. Despite this, some limitations persist, notably the software's inability to interpret non-textual information.

The aim of this work was to classify the business incubators in Spain according to the four phases of startups incubation. Taking into account that the graduation rate implies greater survival and business success of the incubated companies, they have been identified at each stage of the incubation (spread of entrepreneurship, pre-incubation, advanced incubation, and graduation). The activities that present higher impacts on the success of the incubated companies and the activities carried out by the incubator that have a greater relevance on the graduation of the companies have concretely been considered. Principal component (PC) cluster analysis have been applied. All the incubation variables were used simultaneously, reducing their number, and grouping them into factors, finally the cases were grouped according to these latent variables. Principal components analysis reduced dimensionality to 8 factors with a 74 % of explained variance. Factor 1 was positively related to pre-incubation variables, factor 2 was linked to training and collaboration variables within the entrepreneurship diffusion phase. Factor 3 called activity monitoring and control and was related to phase 3 or basic incubation variables. Clusters analysis facilitates the grouping of incubators into three clusters: Group 1 (16 % of the total), incubators with strong deficits in incubation phases 1, 2 and 3. They are small Business Incubators, often located in rural areas or cities and low graduation rate. Group 2 (30 %), business incubators with very high graduation rate, and strongly positive values in factor 1 and 2. Factor 3 although positive is susceptible to improvement. They are the largest incubators and usually located in industrial and technological parks. Group 3 (54 %) is the majority, with values close to cluster 2 and 3.

As a major coal country, China faces the issue of significant gas emissions during the coal mining process. This study aims to improve the utilization efficiency of mine gas, reduce greenhouse gas emissions, and promote the low-carbon and green transformation of the coal industry. A 10kW gas regenerative thermal oxidation (RTO) experimental system was constructed. The effects of initial methane concentration, low-temperature flue gas proportion, and operating load on combustion temperature, methane oxidation rate, high-temperature flue gas energy, and system thermal efficiency were studied. The results show that when the combustion temperature is below 600°C, the CH4 combustion reaction cannot proceed effectively, and the system temperature continuously decreases and cannot be maintained stable. The experiment determines the stable operating methane concentration range of RTO. In this experimental system, the lower limit of the initial methane concentration is 0.28%, corresponding to an 86% methane oxidation rate. As the initial methane concentration decreases, the combustion temperature also decreases, and the methane oxidation rate follows suit. The higher the low-temperature flue gas proportion, the higher the combustion temperature, and the system thermal efficiency and output heat decrease with the increase of the low-temperature flue gas proportion. This experiment explores multiple factors affecting regenerative thermal oxidation, providing an basis for ensuring the safe and stable operation of the system and optimization. Improving the thermal insulation and heat exchange performance of the storage body can expand the lower limit of the initial methane concentration, thereby increasing the stability and thermal efficiency of the system.

Shared public buildings have become centers of innovation, integrating advanced technologies to meet evolving societal needs. With a heightened emphasis on occupants’ health and well-being, these buildings serve as hubs for technological convergence, facilitating seamless connectivity and intelligent data analysis and management. Within this context, environmental monitoring emerges as a foundational element, pivotal to all aspects of building management. This article provides findings from the nationally funded RE-START project, which focuses on shared public buildings, with special regard to educational and medical facilities. The project explores enhanced indoor air quality monitoring, focusing in particular on CO2 concentration that is directly correlated with occupancy, as a fundamental element for developing health and safety protocols, energy efficiency strategies, integration of smart building technologies, and data-driven energy management. The intersection of environmental monitoring, energy efficiency, security, and IoT technologies in in indoor spaces are relevant. The outcomes of the study reveal the delicate nature of all the involved components, that need to be carefully developed in an integrated manner.

Enteric infections are a major public health concern. Detecting risk areas requires a strong surveillance system for pathogenic viruses in possible sources such as wastewater. To build an environmental surveillance system, we aimed to identify group A rotavirus (RVA) and human adenovirus (HAdV) in wastewater. We also focused on three different methods of viral concentration to determine suitability for a regular surveillance system. We screened 20 wastewater samples for HAdV and RVA using quantitative polymerase chain reaction (qPCR) and conventional polymerase chain reaction (cPCR). Sixteen posi-tives (18/20) and ten (14/20) positives for HAdV and RVA, respectively, were obtained on qPCR, representing a prevalence of 90% and 70%. Twelve (12) positives were successfully amplified. Bag-mediated filtration system (BMFS) and skimmed milk (SM) flocculation were the most consistent viral concentration methods for HAdV and RVA, respectively. Human adenovirus was identified with nucleotide identity range of 98.48% to 99.53%. Statistical analysis of positives showed that viral burden differed by site (P

Hemangioblasts give rise to endothelial progenitor cells (EPCs), which also express the cell surface markers CD133 and C-kit. They may differentiate into the outgrowth endothelial cells (OECs) that control neovascularization in the developing embryo. Reduced levels of EPC in circulation have been linked to human cardiovascular disorders, according to numerous studies. Furthermore, preeclampsia and senescence have been linked to levels of EPCs produced from cord blood. Uncertainties surround how preeclampsia affects the way EPCs function. It is reasonable to speculate that preeclampsia may have an impact on the function of fetal EPCs during the in utero period; however, given the present literature's suggestion that maternal vasculopathies, including preeclampsia, damage fetal circulation. Additionally, the differentiation potential and general activity of EPCs may serve as an indicator of the health of the fetal vascular system since they promote neovascularization and repair during pregnancy. Thus, the purpose of this review is to compare, through assessment of their quantity, differentiation potency, angiogenic activity, and senescence, the angiogenic function of fetal EPCs obtained from cord blood for normal and pregnancy problems. This will shed light on the relationship between the angiogenic function of fetal EPCs and pregnancy complications, which could have an effect on the management of long-term health issues like metabolic and cardiovascular disorders in offspring with abnormal vasculature development.

Shigella and Salmonella have been implicated in neonatal sepsis, food poisoning, and bacteremia. Their increasing resistance to antibiotics has undermined treatment options, constituting a public health crisis. Also, the scarcity of new antibiotics in the development pipeline compounds multidrug-resistance (MDR). Hence, there is a need to potentiate antibiotics to mitigate resistance. This study leveraged riboflavin to re-sensitize fluoroquinolones and carbapenems against MDR Shigella and Salmonella spp. Disk diffusion, microbroth-dilution, chequerboard, and time-kill assays were used to determine resistance profiles and riboflavin-antibiotic activity. Biofilm-formation and bacterial viability (after riboflavin-antibiotic challenge) was determined with crystal-violet and Macrophage infection assays, respectively. Strains exhibited >80% resistance to fluoroquinolones and carbapenems, with 160–320 µg MIC ranges and 0.5–2 FIC, indicating no synergy. At 40–80 µg riboflavin, there was two-fold reduction in bacterial survival, with meropenem-riboflavin exhibiting significant reduction and FIC of 0.075 indicating high synergistic activity. Biofilm-formation was altered (from strong to weak phenotype) with 40 µg riboflavin-antibiotic treatment. There was a 40–70% reduction in bacterial survival in THP-1 cells treated with meropenem-riboflavin after 3 hours, and complete clearance between 24-48 hpi. Riboflavin potentiated fluoroquinolones and meropenem, leading to modulation of the host immune response for the clearance of the strains.

Two coupled climate models which participated the CMIP6 project (Coupled Model Intercomparison Project Phase 6), the Earth System Model of Chinese Academy of Sciences version 2 (CAS-ESM2-0) and the Nanjing University of Information Science and Technology Earth System Model version 3 (NESM3), were assessed in terms of the impact of four new sea ice parameterization schemes. These four new schemes are related to air-sea heat flux, radiation penetration and absorption, melt ponds, ice-ocean flux, respectively. To evaluate the effectiveness of these schemes, key sea ice variables with and without these new schemes, such as sea ice concentration (SIC) and sea ice thickness (SIT), were compared against observation and reanalysis product from 1980 to 2014. The simulations followed the design of historical experiments within the CMIP6 framework. The results revealed that both models demonstrated improvements in simulating Arctic SIC and SIT when the new parameterization schemes were implemented. The model bias of SIC in some marginal sea ice zones of Arctic was reduced, especially during March. The SIT was increased and the transpolar gradient of SIT was reproduced. The changes of spatial pattern of SIC and SIT after adding new schemes bear similarities between the two coupled models. This suggests that the new schemes have potential for broad application in climate models, especially for those with underestimated SIT.

The objectives of this study were to evaluate fixed risk factors associated with PWM and to estimate genetic parameters for PWM. A total of 927 birth records from a mixed population of purebred and crossbred Boer and Spanish goats born between 2016 and 2023 at the International Goat Research Center (IGRC) were used for this study. Four binary traits were studied: D0-3 (death within 3 days after birth), D4-60 (death between 4 and 60 days), D61-90 (death between 61 and 90 days), and D0-90 (death within 90 days). Logistic regression models were used to evaluate the risk factors associated with PWM traits. Bayesian threshold models and Gibbs sampling were used to estimate the genetic parameters. Birth weight, season, litter size, sex, dam age, breed, and heterosis were found to be significantly associated with at least one of the PWM traits. Heritability estimates were 0.263, 0.124, 0.080, and 0.207, for D0-3, D4-60, D61-90, and D0-90, respectively. The genetic correlations between the studied traits ranged from 0.892 (D0-3 and D0-90) to 0.999 (D0-3 and D61-90). These results suggest that PWM in goats is influenced by both non-genetic and genetic factors and can be reduced by management, genetic selection, and crossbreeding approaches.

BackgroundThe use of antimicrobials to treat food animals may result in antimicrobial residues in foodstuffs of animal origin. The European Medicines Association (EMA) and World Health Organization (WHO) define safe antimicrobial concentrations in food based on acceptable daily intakes (ADIs). It is unknown if ADI doses of antimicrobials in food could influence the antimicrobial susceptibility of human-associated bacteria. ObjectivesThis aim of this study was to evaluate if the consumption of ADI doses of erythromycin could select for erythromycin resistance in a Galleria mellonella model of Streptococcus pneumoniae infection. Methods A chronic model of S. pneumoniae infection in G. mellonella larvae was used for the experiment. Inoculation of larvae with S. pneumoniae was followed by injections of EMA (0.0875 μg/ml) and WHO (0.012 μg/ml) ADI doses of erythromycin proceeded by isolation of S. pneumoniae colonies on selective agar plates. Minimum inhibitory concentrations (MICs) of resistant colonies were measured, and whole genome sequencing (WGS) was performed followed by variant calling to determine the genetic modifications.   Results Exposure to single doses of both EMA and WHO ADI doses of erythromycin resulted in the emergence of erythromycin resistance in S. pneumoniae. Emergent resistance to erythromycin was associated with a mutation in rplA. Conclusion In our in vivo model, even single dose of erythromycin that are classified as acceptable by the WHO and EMA induced significant increases in erythromycin MICs in S. pneumoniae. These results suggest the need to include the induction of antimicrobial resistance (AMR) as a significant criterion for determining ADIs.

A study was carried out in a Waste Sorting Plant (WSP) located in France and treating dry recyclable household waste (DRHW) as well as dry recyclable commercial and industrial waste (DRCIW). The aim was to investigate the exposure to bioaerosol and dust. The aim of the study was to assess the extent to which the measurement of concentration, species composition and particle size distribution can contribute to a better assessment of the biological risks associated with exposure. Both stationary and personal bioaerosol and dust samples were collect in the (WSP). The results confirm that waste and waste sorting activities are sources of airborne fungi. Indeed, ambient concentrations ranged from 7.3×103 to 8.5×105 CFU/m3 for culturable moulds and up to up to 4 mg/m3 for dust. Personal exposure to inhalable dust was found up to 3 mg/m3 for dust and ranged from 8.6×103 to 1.5×106 CFU/m3 for fungi. Airborne fungal communities were found to be dominated by the Penicillium genera in both bioaerosols and settled dust samples, followed by the Aspergillus, Cladosporium, Wallemia, Mucor, and Rhizopus genera. Fungi were carried by particles of aerodynamic diameters mainly between around 2.0 and 10.0 µm. The findings dealing with size distribution and biodiversity of bioaerosols suggest that employees are exposed to complex bioaerosols during their work and helps to make a finer diagnosis of the risks involved, which is often difficult in the absence of any OEL for bioaerosols in general.

The mechanical pre-treatment constitutes an unavoidable pre-step prior to biofuels conversion. As the cost of this step is often underestimated, recently researchers have striven to identify and characterize the mechanical pre-treatment effects in terms of post-treatment physical characterization, derived improvement of enzymatic digestibility, and output yields. The status of existing mechanical pre-treatment techniques is reviewed by substrate’s typology for lignocellulose biomass, focusing on comminution techniques. Emphasis has been dedicated to the particle size achieved after treatment, crystallinity breakage and eventual inhibitory phenomena deriving from the application of particle size reduction, which are analysed and discussed.

To handle the challenges and uncertainties of the actual labor market, the concept of employability becomes increasingly relevant, especially for graduates facing the transition from university to work. Graduate employability is a complex concept comprising different dimensions that may trigger effective job search and career management. This study introduces a new multifaceted tool, labeled the Orientamentis Questionnaire, to assess graduate employability from an agentic perspective, testing its psychometric properties. The Orientamentis questionnaire measures 14 dimensions merged into four 4 areas, namely graduate psychological capital, graduate agentic capabilities, graduate career perspective, and graduate proactive strategies. The tool was administered to a sample of 1238 graduate students (66% females) examining its factorial structure and reliability. To test its criterion validity, associations with three occupational outcomes collected one year later were explored on a subsample of 273 participants (66% females). Results attested the factorial structure of the Orientamentis questionnaire and the reliability of all dimensions. Moreover, the four areas and most of the dimensions were differently related to at least one subsequent occupational outcome. The Orientamentis Questionnaire represents a sound and reliable tool providing a multifaceted profile of graduate employability strengths and weaknesses, that could be used in academic placement programs to foster graduates’ self-awareness and proactive job search.

The UN Sustainable Development Goal 7 Report 2022 is about ensuring access to clean and affordable energy, which is key to the development of agriculture, business, communications, education, healthcare, and transportation. The lack of access to energy hinders economic and human development. Nevertheless, the current pace of progress is insufficient to achieve Goal 7 by 2030. Huge disparities in access to modern sustainable energy persist. Rising commodity, energy and shipping prices have increased the cost of producing and transporting solar photovoltaics modules, wind turbines and biofuels worldwide, adding uncertainty to a development trajectory that is already far below Goal 7 ambitions. Achieving energy and climate goals will require continued policy support and a massive mobilization of public and private capital for clean and renewable energy such as methane from biomass. An important factor in improving methane yield from biomass waste is pre-treatment of the biomass prior to anaerobic digestion. Size reduction of lignocellulose biomass is important for changing and increasing digestibility thus increasing methane yield. A Hollander beater was used as the mechanical pre-treatment machine throughout this study. Results indicate that methane yield is directly proportional to feedstock/Inoculum (F/I) ratio as higher F/I ratio led to higher methane yield. It was observed at an F/I ratio of 0.5 that 5 minutes pre-treatment time produced highest methane yield, while the lowest methane yield was observed at an F/I ratio of 0.2 with 1 minute of pre-treatment time. Methane yield decreased by 30% from 140 mL gTS-1 at F/I ratio 0.5 with 5 minutes pre-treatment time to 98 mL gTS-1 at F/I 0.2 with 5 minutes pre-treatment time. The optimum methane yield was attained at high F/I ratio allowing sufficient nutrient essential for complete degradation of biomass. Overall, this research shows the Hollander beater is not efficient in optimizing methane yield for cardboard.

This longitudinal study examined the development of executive function and calibration accuracy in pre-adolescents. Two hundred sixty two students(127 females) from grades 4 (n = 91), 5 (n = 89) and 6 (n = 82) took measures of executive function and performance calibration in a sport task, three times within a period of 20 months. A latent growth curve modeling analysis showed a significant relation between the rates of change of executive function and calibration. Further, the results showed a dynamic interplay in the development of executive function and calibration. There were significant inter-individual differences in the estimated population means both in executive function and calibration and in the rate of change of executive function, but not in the rate of change for calibration. The age of the participants had a positive effect only on the estimated population mean of executive function.

This study focuses on enhancing controllable fibrin-based hydrogels for tissue engineering, addressing existing weaknesses. By integrating a novel copolymer, we improve the foundation for cell-based angiogenesis with adaptable structural features. Tissue engineering often faces challenges like waste disposal and nutrient supply beyond the 200 µm diffusion limit. Angiogenesis breaks through this limitation, allowing the construction of larger constructs. Our innovative scaffold combination significantly boosts angiogenesis, resulting in longer branches and more capillary network junctions. The copolymer attached to fibrin fibers enables precise adjustment of hydrogel mechanical-dynamic properties for specific applications. Our material proves effective for angiogenesis, even under suppression factors like suramin. In our study, we prepared fibrin-based hydrogels with and without the copolymer PVP12400-co-GMA10mol%. Using a co-culture system of human umbilical vein endothelial cells (HUVEC) and mesenchymal stem cells (MSC), we analyzed angiogenetic behavior on and within the modified hydrogels. Capillary-like structures were reproducibly formed on different surfaces, demonstrating the general feasibility of three-dimensional endothelial cell networks in fibrin-based hydrogels. This highlights the biomaterial's suitability for in vitro pre-vascularization of biohybrid implants.

Sustainable development of our society demands recycling of metallic wastes which may contain a variety of metallic impurities. Thus, it is desirable to develop a ‘universal’ structure, such as an amorphous alloy tolerating high concentrations of metallic pollutants. We performed ab initio molecular dynamics simulations to manufacture a novel multicomponent amorphous alloy of twenty elements (20e-HEAA). Analysis reveals both topological and chemical compositional short-range ordering in the obtained 20e-HEAA and formation of B-B clusters. Electronic structure calculations reveal the metallic nature of the amorphous alloy with its Fermi level falling in a valley in the density of states. Moreover, the Zn 3d and Cd 4d electrons exhibit a localized nature and thus, should be excluded from the valence electron concentration (VEC) analysis in the study of high-entropy alloys. The information obtained here is helpful to get insight into multicomponent high entropy materials, especially multicomponent high-entropy amorphous alloys as potential circular metals.

Transport electrification is essential for reducing CO2 emissions, and technologies such as hybrid and range-extended electric vehicles will play a crucial transitional role. Such vehicles employ an internal combustion engine for on-board chemical energy conversion. The Wankel rotary engine should be an excellent candidate for this purpose, offering high power-to-weight ratio, simplicity, compactness, perfect balance, and low cost. Until recently, however, it has not been in production in the automotive market, due, in part, to relatively low combustion efficiency and high fuel consumption and unburnt hydrocarbon emissions, which can be traced to constraints on flame speed, an elongated combustion chamber, and relatively low compression ratios. This work uses large-eddy simulation to study the in-chamber flow in a peripherally ported 225cc Wankel rotary engine, providing insight into these limitations. Flow structures created during the intake phase play a key role in turbulence production but presence of the pinch point inherent to Wankel engine combustion chambers inhibits flame propagation. Two efficiency-enhancement technologies are introduced as disruptive solutions: (i) pre-chamber jet ignition and (ii) the two-stage rotary engine. These concepts overcome the traditional efficiency limitations and show that Wankel rotary engine design can be further enhanced for its role as a range extender in electrified vehicles.

In this study, different configurations based on linear fiber lasers were proposed and experimentally demonstrated to measure the concentration of paracetamol liquid solutions in a range of 52.61 to 201.33 g/kg. The optical gain was provided by a commercial bidirectional Erbium-Doped Fiber Amplifier (EDFA) and the linear cavity was obtained using two commercial Fiber Bragg Gratings (FBGs). The main difference of each configuration was the coupling ratio of the optical coupler used to extract the system signal. The sensing head corresponded to a Single-Mode Fiber (SMF) tip that worked as an intensity sensor. The results reveal that, despite the optical coupler used (50:50, 60:40, 70:30 or 80:20), all the configurations reached the laser condition, however, the concentration sensing was only possible using a laser drive current near to the threshold value. The configurations using a 70:30 and an 80:20 optical coupler allowed to perform paracetamol concentration measurements with a higher sensitivity of (-3.00±0.24) pW/(g/kg). In terms of resolution, the highest value obtained was 1.75 g/kg, when it was extracted 20% of the output power to the linear cavity fiber laser configuration.

Evaluation of the patients after the surgical correction of idiopathic scoliosis in long-term follow-up with the clinical neurophysiology methods has not been presented in detail. This study aimed to compare the results of the neurophysiological studies in 45 girls with scoliosis of Lenke 1-3 types performed pre- (T0), postoperatively (T1, one week after surgery), and 6 months after the surgery (T2). Parameters of surface electromyography during the attempt of maximal contraction (mcsEMG) and transcranially evoked motor evoked potentials (MEP) recorded from anterior tibial muscles, as well as the electroneurography (ENG) of peripheral transmission in the peroneal nerve motor fibers were compared. The results indicate that efferent neural conduction function both centrally and peripherally as well as TA muscle function improve immediately after surgical correction of scoliosis (at p=0.05) and further normalization appears after six months in long-term follow-up (at p=0.03). It has been found in sEMG recordings, that the TA muscle motor unit recruitment function after half a year from surgical treatment in IS patients is comparable to the normal condition. ENG recordings results indicated the gradual retreat of the motor fibers injury symptoms mainly of the axonal type in peroneal nerves, the surgeries improved also the lumbar ventral roots’ neural transmission to the functional status considered as normal. MEP amplitude parameters recorded after the surgical scoliosis correction in T1 indicated a slight improvement in the efferent transmission of neural impulses within the fibers of the spinal tracts; in long-lasting T2 observation, they reached values comparable to those recorded in healthy volunteers bilaterally. Preoperatively (T0) the results of all neurophysiological study parameters in IS patients were asymmetrical at p=0.036-0.05 and recorded as worse on the concave side, suggesting the lateralization of neurological motor deficits. One week postoperatively (T1), this asymmetry was recorded as gradually reduced, showing almost no difference between the right and left sides six months later (T2). The presented algorithm of the diagnostic proceeding pre-, early post-, and long-lasting postoperatively using mcsEMG, MEP, and ENG neurophysiological examinations can be significant not only in making the final decision regarding surgical treatment and its personalization but also helps in precise ascertaining its effects as well as in predicting the final result of IS treatment.

Thin twin-roll cast strips from a model Al-Cu-Mg-Li-Zr alloy with a small addition of Sc were prepared. A combination of a fast solidification rate and a favorable effect of Sc microalloying impacts the size and distribution of primary phase particles and the dimension of eutectic cells. Small interdendritic spacing in the range of 10-15 um enables substitution of the initial long-term homogenization annealing by a two-step annealing at 300 and 450 °C and a short solution treatment at 530 °C before quenching and the final age-hardening procedure. A dense dispersion of small Al3(Sc,Zr) precipitates intensively inhibiting recrystallization forms during this treatment. Further refining and fragmentation of the structure were performed using constrained groove pressing before the solution treatment. Small pre-straining of quenched specimens and subsequent age-hardening simulating T8 temper were used to promote the formation of a homogeneous distribution of strengthening particles and to suppress preferential heterogeneous precipitation on subgrain and grain boundaries. Microstructural features and microhardness evolution during annealing were critically examined and confronted with microstructural characteristics observed on reference mold cast alloy or alloys without Sc alloying. The proposed treatment represents a model near net shape procedure for manufacturing thicker sheets for the aerospace industry.

The new energy structure needs to balance energy security and dual carbon goals, which has brought major challenges to coal-fired power plants, the pollution reduction and carbon emissions reduction of coal-fired power plants will be a key task in the future. This article proposes an optimization operation of electrostatic precipitators(ESP), based on the working mechanism and historical data of ESP, voltage-current characteristic model and outlet dust concentration prediction model are constructed by deep learning algorithm, Particle Swarm Optimization(PSO) is used to achieve the optimal energy consumption while ensuring stable outlet dust concentration. By training with historical data collected on site, accurate prediction of secondary current and outlet dust concentration of ESP has been achieved, the Mean Absolute Percentage Error(MAPE) of secondary current is less than 1.5%, and the MAPE of outlet dust concentration of ESP on the test set is less than 5.2%. Finally, the optimization experiment is carried out in a 330MW coal-fired power plants, the results showed that the fluctuation of the outlet dust concentration is more stable, and the energy saving is about 43% after optimization, according to the annual operation of 300 days, the annual average carbon reduction is approximately 2621.34 tons. This method is effective and can be applied widely.

A community-level nutrition intervention was implemented among tribal children (3 to 6 years) in Telangana, India. The one-year intervention involved six nutrient-rich formulations of millet-pulse-groundnut based products, suited to local taste preferences. Anthropometric measurements of height, weight and Mid-Upper-Arm -Circumference (MUAC) along with haemoglobin (Hb) levels were monitored at baseline and endline. The treatment group showed considerable gain in height (3.2 cm), weight (1.68 kg) and MUAC (0.33 cm), over the control group. Paired t-test indicated significant differences (p<.01) between pre- and post-intervention anthropometric measurements. Positive shifts were observed in wasting (WHZ; -1.2 ±1.3 to -0.9± 1), stunting (HAZ; -1.8±1.6 to -0.3±1.3) and underweight (WAZ; -1.9±1.2 to -0.7±1) among treatment group. Hb levels in the treatment group also improved significantly from 9.70 ± 0.14 g/dl (moderately-anaemic) to 11.08 ± 0.13 g/dl (non-anaemic). Post-intervention Focus Group Discussions (FGDs) involving mothers and teachers confirmed the positive impact. Thus, nutritional intervention formulated using climate resilient millets, pulses and groundnut, promotes dietary diversity and improves the nutrition & health status of children.

The goal of this study was to determine the relative susceptibility of four common equine wound pathogens to ten different types of antimicrobial agents based on minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Additionally, to describe the comparison of bactericidal activity of medical grade Manuka honey, local honey, and commercial, food-grade honey to other commonly used wound dressings. The objective is to provide veterinary practitioners with comparative data on the use of a variety of antimicrobial dressings for inhibiting growth of common wound bacteria. MIC and MBC for Manuka, store, and local honeys were comparable to those of sterile gauze, sugar, and hypertonic saline. Across bacterial species, local honey proved to have more bactericidal activity when compared to Manuka and commercial, food-grade honey. The MIC and MBC for PHMB gauze and foam was consistently at a higher dilution compared to the other antimicrobials. The majority of antimicrobials exhibited stronger inhibitory and bactericidal activity against a Streptococcus zooepidemicus isolate obtained from a wound compared to other bacteria that were ATCC lab acclimated. Additional research for in-vivo applications needs to be done to see whether differences exist in effective wound management.

This study investigates the effect of dividend policy on firm performance and value in the Korean market, taking into account the unique context of Chaebol ownership structures. Analyzing 5,478 observations from the Korean Composite Stock Price Index, the research employs multiple regression models to explore the effects of various dividend policy measures under alignment and entrenchment theories. The key findings reveal significant impacts of cash dividend payment on firm value, while dividend yield and dividend policy exhibit varying associations. In the Chaebol and non-Chaebol context, mixed results suggest complex interactions between dividend policy and business outcomes. Policy recommendations emphasize transparent communication about dividend policy to mitigate information asymmetry and enhance corporate governance in the Korean market.

This study examines the absorption and concentration of anthracene (AN) in the garden radish. Studies were conducted to grow radishes from the sowing stage in soil contaminated with AN, and to grow radishes in soil contaminated with AN following maturity (27 days after sowing). For the growth in AN-containing soil from sowing onward, AN levels immediately after seeding ranged from 12,500-36,300 ng/g-ww. AN concentrations during growing period ranged from 7140-16,000 ng/g-ww in soil and from 38.2-2160 ng/g-ww in radish, respectively. For the growth in AN-containing soil after maturity, AN concentrations in soil and radish ranged from 9560-22,100 ng/g-ww and 342-2270 ng/g-ww. The concentrations of AN in the roots and leaves had a higher density than those in the stems. In these experiments, positive relationships between AN levels in soil and radishes were observed. It is inferred that the greater the degree of soil contamination, the greater the effect on the amount of AN assimilated by the radishes. The concentration ratio (radish-to-soil; Cr/Cs) decreased exponentially with days since AN application. This indicates that the concentration ratio is affected by time in contact with AN. According to the results for the change over time of Cr/Cs and contents by radish part, it is thought that AN in the soil has good absorption through the roots to circulate within the organism, and is preferentially distributed and accumulated in the roots and leaves, which have high organic matter content.

Urbanization influences food culture, particularly in low- and middle-income countries, where there is an increasing consumption of processed and pre-packaged foods. This shift is contributing to a rise in non-communicable diseases. Food labeling standards are crucial for regulating manufacturing practices and aiding consumers in making healthy food choices. We aimed to assess the compliance of local and imported pre-packaged snacks with Tanzanian and international labeling standards in Dar es Salaam, Tanzania. A cross-sectional study was conducted on 180 snack products. A checklist based on Tanzanian and Codex labeling standards was used to evaluate adherence. We also examined factors influencing adherence, such as product origin, price, category, purchase location, and package size. The majority of the snacks demonstrated partial adherence to labeling standards. Imported products showed significantly better full adherence to both Tanzanian and International standards. Notably, over half of the products used English for labeling, and infrequently used the recommended World Health Organization Front-of-Pack nutrition Labeling. Product category, origin, and package size were significantly associated with higher levels of International standard adherence (p<0.05). The inadequate adherence to mandatory labeling standards, scarce use of Swahili and FoPL highlight the need to strengthen labeling practices and potential challenges faced by consumers in understanding nutritional information. Thus, strengthening and emphasizing good labeling practices is of urgency as we seek to address diet-related Non-communicable diseases.

Nuclear Magnetic Resonance (NMR) and its various forms are extensively utilized in both research and clinical settings to analyse molecules. NMR data pre-processing, while essential to NMR data analysis, can be uniquely complex. Despite the availability of software tools, understanding these processes can be challenging, complicating the selection of appropriate pre-processing steps. In this review, we elucidate pre-processing steps in the time domain from a mathematical and statistical perspective, explaining direct current offset removal, eddy current correction, shift and linear prediction, weighting, zero filling, and domain transformation using plain language and fundamental mathematical formulas. Our objective is to clarify these processes in simple terms and provide general guidance.

The aim of the study was to compare the standard baseline imaging, with extended radiological staging. To assess our hypothesis, we performed a prospective, single-centre study which included 132 participants recruited between October 2015 and March 2020. Descriptive statistics, the Friedman and chi-squared tests were performed and p &lt; 0.05 was considered significant. Patients were grouped into two cohorts, CT scan cohort (n=87) and PET-CT cohort (n=43). In the first group the originally determined disease stage changed in 36.8 % of cases, in second group in 51.2 %. The consistency between assessment of axillary lymph nodes by imaging (cN) and the postoperative pathology report (pN) was evaluated. In most cases, clinical and pathological evaluation of involved nodes was consistent, for CT scan the result was χ2(1) = 18.98; p &lt; 0.001, for PET-CT the result was χ2(1) = 6.41; p = 0.03. Highly customized radiation therapy defined as dose boost within the involved lymph nodes, not covered by surgeon, was applied in nine patients.

Polycystic ovary syndrome (PCOS) is a multisystem disorder that presents with a variety of phenotypes involving metabolic, endocrine, reproductive, and psychological symptoms and signs. Women with PCOS are at increased risk of pregnancy complications including implantation failure, miscarriage, gestational diabetes, fetal growth restriction, preterm labour, and preeclampsia (PE). This may be attributed to the presence of specific susceptibility features associated with PCOS before and during pregnancy, such as chronic systemic inflammation, insulin resistance (IR), and hyperandrogenism, all of which have been associated with an increased risk of pregnancy complications. Many of the features of PCOS are reversible following lifestyle interventions such as diet and exercise, and pregnant women following a healthy lifestyle have been found to have a lower risk of complications, including PE. This review summarizes the evidence investigating the risk of PE and the role of nutritional factors in women with PCOS. The findings suggest that the beneficial aspects of lifestyle management of PCOS, as recommended in the evidenced-based international guidelines, extend to improved pregnancy outcomes. Identifying high-risk women with PCOS will allow targeted interventions, early pregnancy screening, and increased surveillance for PE. Women with PCOS should be included in risk assessment algorithms for PE.

As for their large surface area and pore volume, three-dimensional covalent organic frameworks (3D COFs) have emerged as competitive porous materials. However, due to the structural dynamic behavior particularly for imine-linked 3D COFs, potentially unlock their potential for gas storage application. Herein, we showed a pre-locked linker strategy introduces breaking dynamic behavior in 3D COFs. A predesigned planar linker based 3,8-diamino-6-phenylphenanthridine (DPP) was prepared to produce non-dynamic 3D JUC-595, as benzylideneamine moiety in DPP locked the linker flexibility and restrict the molecular-bond rotation of the imine linkages. Upon solvent inclusion and release, the PXRD profile of JUC-595 remained intake, while JUC-594 with flexible benzidine linker experienced crystal transformation due to framework contraction-expansion. As a result, the activated JUC-595 achieved higher surface areas (754 m² g-1) than that of JUC-594 (548 m² g-1). Furthermore, improved CO2 and CH4 storages were also seen in JUC-595 compared with JUC-594. Impressively, JUC-595 recorded high normalized H2 storage capacity that surpass other reported high surface area 3D COFs. This works shows important insight on manipulating structural properties of 3D COF to tune the gas storage performance.

Higher traffic density in Russian cities and less uniform traffic due to congestions are reasons for increased emissions of pollutants contained in exhaust gases of vehicles. The paper presents the modeling results of pollutant dispersion in Magnitogorsk. The analysis of these results shows that now many blocks of flats and social infrastructure of the city are in a zone with an excess of maximum allowable concentration of pollutants. Having summarized the methodological framework formulated by Russian and foreign researchers, the authors systemized the existing methods used to decrease pollutants produced by vehicles. It is proposed to choose an optimal combination of such methods applying a developed mathematical model. By adopting an optimal combination of the methods, it is possible to ensure minimum air pollutant emissions from vehicles, allocating limited financial resources. The mathematical modeling of the solutions on changing traffic density and structure and implementing methods used to decrease pollutants on one of the Magnitogorsk crossroads with the heaviest traffic is used to draw a conclusion about efficiency of the designed model used as a tool for strategic planning of development and transformation of street networks.

To meet the International Maritime Organization’s requirements for carbon dioxide emissions from ships, a cost-effective and practical ship decarbonization tower was autonomously designed based on the marine diesel engine model 6135G128ZCa. The tower is internally filled with structured packing, and a slot-type liquid distributor at the top of the packing evenly distributes the NaOH solution to absorb carbon dioxide from the ship’s exhaust gas. Experimental research was conducted to investigate the influence of factors such as liquid-to-gas ratio and NaOH concentration on the performance of the decarbonization tower. The results confirmed that the use of NaOH solution can effectively absorb CO2 from ship exhaust gas, reducing CO2 emissions by more than 81.59% and meeting the EEDI (Energy Efficiency Design Index) requirements specified by the IMO.

X-band marine radar captures signal reflected from the sea surface. Theoretical studies indicate that the initial unfiltered signal contains meaningful information including parameters related to wind waves. Traditional methods for estimating significant wave height (SWH) rely on the physical laws describing signal reflection from rough surfaces. However, recent studies suggest the feasibility of employing artificial neural networks (ANNs) for SWH approximation. Both classical and ANN-based approaches necessitate costly in situ data. In this study, we propose generating synthetic radar images with specified wind wave parameters using Fourier-based approach and Pierson–Moskowitz wave spectrum as a viable alternative. We generate synthetic images and use them for unsupervised learning approach to train a convolutional component of an ANN. After that, we train a regression ANN based on the previous convolutional component to obtain SWH back from synthetic images. Then, we apply preliminary trained weights for the same regression model to train SWH approximation on the dataset of real sea clutter images. In this study, we demonstrate the increase in the accuracy of SWH estimation from radar images with the preliminary training on synthetic data.

Membrane filtration is a popular choice in the treatment of wastewater for reuse. However, when used to produce clean water, these devices are subject to concentration polarization and fouling, which inhibit their ability to operate efficiently and provide high-quality permeate streams. Patterned membrane surfaces offer a hydrodynamic approach to mitigating concentration polarization and the surface fouling that follows. However, when subject to a steady feed flow rate, surface patterns generally produce stagnant zones in cavity-like spaces where particulate from the bulk flow recirculates in stationary vortices. To prevent aggregation in these recirculation zones, and therefore the onset of surface fouling, we study a rapidly pulsed feed flow. When combined with cavity-like geometries, such as the valleys present in membrane surface patterns, a rapidly pulsed flow generates mixing mechanisms (i.e., the deep sweep and the vortex ejection) that disrupt otherwise stagnant regions. First, we confirm the existence of these mechanisms, which are typically induced in impermeable cavities at relatively low Reynolds numbers, for near transitional feed Reynolds numbers in permeable cavity spaces via numerical simulation of the flow field. Following this confirmation, we demonstrate the ability of these mechanisms to remove particles trapped in recirculation zones via massless particle tracking studies. The results of this work suggest that when combined with a rapidly pulsed inlet flow, patterned membrane surfaces can not only alleviate concentration polarization and the surface fouling that follows but also reduce the need for traditional cleaning methods, which require operational downtime and often involve the use of abrasive chemical agents.

The objective of the present report is the dissemination of information acquired during the application of ISO 6579-1:2017 for the isolation of Salmonella spp. from swine samples. ISO 6579-1:2017 is the officially recommended by the EU protocol for the isolation of Salmonella spp., aiming in the harmonization of effective successful control of Salmonella infection in food producing animals. Successful control of animal salmonellosis is highly dependent on the sensitivity of the biochemical methods reliably detecting the presence of the pathogen in various stages of food production. Application of ISO 6579-1:2017 resulted in the isolation of twelve Salmonella spp. and eighteen other members of the family of Enterobacteriaceae biochemically and antigenically resembling salmonellae. The findings necessitated in the depth evaluation of the culture media xylose-lysine-desoxycholate agar (XLD), Salmonella-Shigella Agar (SS), Brilliant Green Agar (BGA), Salmonella Chromogenic Agar (SCA), Triple Sugar Iron (TSI) and modified semi-solid Rappaport–Vassiliadis (MSRV) agar. The evaluation showed that these culture selective media differed significantly in their performance regarding the isolation of Salmonella from swine samples. It was concluded that the presence of atypical Salmonella strains negatively affects the prevalence of Salmonella, thus the identification of carrier pigs, eventually affecting the efficiency of control programs. Thus, doubtful results require additional biochemical testing for confirming the accuracy of such universally recommended isolation methods.

In a recent effort to mitigate harm from human pathogens, many biosynthetic pathways are extensively evaluated for their ability to inhibit pathogen growth and determine drug targets. Among those, one of the important products/targets of such pathways is isopentenyl diphosphate, the universal precursor of isoprenoids, which are essential for the normal functioning of microorganisms. In general, two biosynthetic pathways lead to the formation of isopentenyl diphosphate: 1) the mevalonate pathway in animals and 2) the non-mevalonate or methylerythritol phosphate (MEP) in many bacteria, some protozoa, and plants. Because the MEP pathway is not found in mammalian cells, it is considered an attractive target for the development of antimicrobials against a variety of human pathogens, including Mycobacterium tuberculosis (M.tb). In the MEP pathway, 4-diphosphocytidyl-2-c-methyl-d-erythritol kinase (IspE) phosphorylates 4-diphosphocytidyl-2-C-methyl-D-erythritol (CDPME) to form 4-diphosphocytidyl-2-C-methyl-D-erythritol 2-phosphate (CDPME2P), followed by cyclization to 2-C-methyl-D-erythritol 2,4-cyclodiphosphate (MECPP) by 2-C-methyl-D-erythritol 2,4-cyclodiphosphate synthase (IspF). A virtual high throughput screening was done by docking IspE protein with commercially available compounds and identified an active heterotricyclic compound. Hence, we designed, synthesized, and tested similar new heterotricyclic compounds. This study will provide the critical insight necessary for the ability to develop novel antimicrobials that target the MEP pathways in pathogens.

Introduction Infections caused by multidrug-resistant bacteria (MDR) occur more frequently after pancreaticoduodenectomy (PD) compared to other abdominal surgeries, and infective complications are a leading cause of postoperative morbidity following PD. Pre-operative biliary stent (PBS) placement often leads to biliary contamination, which in turn plays a significant role in postoperative infections. The aim of this study is to evaluate the impact of MDR contamination on short-term postoperative outcomes in patients undergoing PD and to examine the relationship between MDR bacteria, PBS, and bile contamination. Methods This is a retrospective study based on a prospectively maintained database comprising 825 consecutive patients who underwent pancreaticoduodenectomy (PD) between January 2010 and December 2020 at our center. All procedures were conducted with a standardized resection by a dedicated group of surgeons in a specialized pancreatic surgery unit, and the patients were managed according to the same perioperative enhanced recovery protocol. Results MDR bacteria were present in 17.5% of bile cultures, exclusively within the stented group. In our multivariate analysis, the development of a major postoperative complication (MPC) was correlated with the presence of MDR bacteria in the bile (OR 1.66, 95% CI: 1.1-2.52; p = 0.02). MDR bacteria were detected early in the surgical drainage in 144 out of 825 patients (12.1%), with 72.2% having a previous biliary stent placement and 27.8% without stents (p < 0.001). In our multivariate analysis, the development of an MPC was associated with the presence of MDR bacteria in the drainage (OR=1.81, 95% CI: 1.21-2.73, p= 0.0042). Conclusions We demonstrated that MDR contamination worsens the short-term outcomes of patients undergoing PD. Specifically, when MDR bacteria are present in both the bile and drainage, there is a statistically significant increase in the incidence of major postoperative complications (MPC). Our data suggest that the majority of MDR surgical site infections stem from biliary contamination resulting from the placement of a pre-operative biliary stent (PBS).

In order to achieve the target, several activities are being undertaken, including the development of multipurpose reservoir planning for the water supply and sanitation infrastructure, irrigation, and hydropower development for the H project. To undertake this work, the main data given was rainfall data, flow data, catchment area, base population for water supply, and so on. This report presents a specifically preliminary study and design of water supply, irrigation, and hydropower development for the project, which is carried out in accordance with the scope of work given by our professor. The preliminary study and design are therefore to investigate scenarios and alternatives and prepare a document of water supply, irrigation, and hydropower infrastructures for the provision of the assignment. This report, as required in the assignment, contains project background, water sources assessment, selection of suitable hydropower potential, and irrigation sizing, design criteria, descriptions of the proposed scheme, preliminary design of water supply components. The objective of the project is to recommend and design a cost-effective water supply system, irrigation, and hydropower development to supply reliable, sufficient, and safe water from a defined water source to the H project. The specific objectives of the investigation works are: • To assess potential water source alternatives for water supply • Selecting appropriate size for the reservoir which could satisfy all water demand • Assess and select suitable irrigation development and hydropower potential. • Preliminary study and design of all components of the reservoir and appurtenant structures The scope of the project generally focuses on preliminary study and design of water supply, irrigation and hydropower development components from water sources potential and the water balance output.

This study examines the impact of chainsaw chain type and tree species on the concen-tration of inhalable wood dust generated during motor-manual harvesting in forested areas. The chainsaw chain is a critical component, contributing not only to productivity but also to the oper-ator's health and safety. Wood dust creation during harvesting operations poses significant risks and necessitates careful attention due to its potential health effects. We investigated the effects by conducting real-world measurements of inhalable dust within the operator's breathing zone during forestry work. Two different chain types were evaluated: the commonly used 3/8" pitch chain (conventional chain) and the 0.325" pitch chain. Additionally, measurements were taken for three tree species: beech, oak, and pine (including both live and standing dead trees after a fire). Results showed that, overall, using the conventional 3/8" chain type yielded the highest concentration of wood dust for all three tree species. Notably, the highest wood dust concentration was observed in the burned Pinus brutia cluster, also with the 3/8" chain pitch. These findings emphasize the im-portance of understanding how chain type and tree species contribute to wood dust levels and provide valuable insights for enhancing operator health and safety during motor-manual har-vesting operations

Nitrogen is the most commonly managed mineral nutrient in olive groves because it is essential for plant growth. The precise management of N fertilization in olive cultivation is still not fully clarified, but it is now essential for providing sustainable production. A nitrogen fertilizer ex-periment with olive trees (cv. Kalinioti) was carried out over a six-year period. Seven levels of nitrogen fertilizer given as ammonium nitrate (control, 1, 2, 3, 4, 5, and 6 kg/tree) were annually applied in order to determine the effect of nitrogen on vegetative growth, fruit set, fruit weight, yield, maturation index and leaf N,P, and K concentrations. The results indicate that, under these conditions, application of up to 4 kg NH4NO3/tree significantly increased yield to 62.5 kg/tree compared to the control. The positive effect was attributed to the initial and final fruit set increases (7.63 and 3.73%, respectively). However, the weight of 100 olives (337 g) at the same fertilizer rate was considerably lower compared to the control. Higher nitrogen rates decreased yield while increasing overall shoot growth. Nitrogen fertilization did not significantly influence the oil content of olive fruit. Fruit weight, maturation index and concentration of oil reached maximum levels in the beginning of December, indicating a suitable start to olive harvesting with reduced yield losses due to unfavorable weather conditions. With increasing fertilizer levels from 0 to 6 kg NH4NO3,/tree concentration of N in olive leaves also increased from 1.23% to 2.38%. Maximum yield was achieved at a level of 6 kg NH4NO3/tree, which corresponded to 2.01% N in leaves. The results suggest that application of 3 kg NH4NO3/tree can be recommended for table olive pro-duction due to the fact that fruit weight was not decreased, while fertilization with 4 kg NH4NO3/tree was suitable for oil olives.

High-throughput research on bimetallic nanoparticles brought a vast overview of their characteristics and catalytic activities.¹ However, traditional bimetallic nano-allloy quantification methods serving catalyst preparations are not suitable for the fast and robust data output of high-throughput experiments. Hence, this work designed and validated a more fast, more neat, and reliable quantitative analysis using X-ray fluorescence spectroscopy for bimetallic nanoparticles synthesized by high-throughput setups. The results demonstrated this method to be accurate with high precision. Furthermore, the agreement to qualitative results from an energy-dispersive X-ray spectrometer equiped on a scanning electron microscope provided an option to quantify a bimetallic nano-alloy by just analyzing one of the two composing elements. Thus, this method is proved to be highly compatible with high-throughput experiments.

Tropical sea surface temperature (SST) variability, mainly driven by the El Niño–Southern Oscillation (ENSO), influences the atmospheric circulation and hence the transport of heat and chemical species in both the troposphere and stratosphere. This paper uses Met Office, ERA5 and MERRA2 reanalysis data to examine the impact of SST variability on the dynamics of the polar stratosphere and ozone layer over the period 1980 to 2020. Particular attention is paid to studying the differences in the influence of different types of ENSO (East Pacific (EP) and Central Pacific (CP)) for the El Niño and La Niña phases. It is shown that during the EP El Niño, the zonal wind weakens more strongly and changes direction more often than during the EP El Niño, and the CP El Niño leads to a more rapid decay of the polar vortex (PV), an increase in stratospheric air temperature and an increase in the concentration and total column ozone than during EP El Niño. For the CP La Niña, the PV is more stable, which often leads to a significant decrease in Arctic ozone. During EP La Niña, powerful sudden stratospheric warmings are often observed, which lead to the destruction of PV and an increase in column ozone.

Cocoa beans of the CCN-51 clone harvested in the Tumaco region (Nariño, Colombia) were fermented following four different treatments: (1) spontaneously (at room temperature for 120 h) in traditional conditions (Control); (2) traditional processing with a pre-drying (sun-dried for 24 h) treatment (PD); (3) with fermentation (for 120 h) after inoculation of a yeast starter culture (YS); and (4) including both treatments, pre-drying and yeast inoculation (PD+YS). Chemical composition, fatty acids, total polyphenol, methylxanthines (theobromine and caffeine) and lactic acid content of cocoa beans were determined. Chemical and fatty acid composition and theobromine content were not affected by the different fermentation treatment applied. When analysing total polyphenol content, YS and PD+YS treatments significantly increased the content of these compounds at the end of the fermentation process, while PD treatment decreased the caffeine content of cocoa beans. Finally, lactic acid content decreased as a consequence of both inoculation of yeast starter and mainly the pre-drying treatment. In conclusion, solar pre-drying in the open air and the inoculation of a yeast starter treatments could improve the final quality of coca beans.

Magnetic Resonance Imaging (MRI) is widely used in clinics and research due to its accurate disease identification and non-invasive nature. MRI is based on Nuclear Magnetic Resonance (NMR), which is also extensively employed in various fields. NMR and its modern versions involve intricate pre-processing steps before data analysis. These steps are initially processed in the time domain and subsequently in the frequency domain. While our previous review focused on time domain pre-processing (https://www.preprints.org/manuscript/202310.2032/v1), this review delves into the mathematical and statistical aspects of frequency domain pre-processing. We discuss essential pre-processing steps like phase error correction, baseline correction, solvent filtering, calibration and alignment, reference deconvolution, binning/bucketing and peak picking, peak fitting/deconvolution and compound identification, integration and quantification, normalization and transformation. Furthermore, we offer practical recommendations for each step.

The Chat Generative Pre-training Transformer (GPT), also known as ChatGPT, is a powerful generative AI model that can simulate human-like dialogues across a variety of domains. However, this popularity has attracted the attention of malicious actors who exploit ChatGPT to launch cyberattacks. This paper examines the tactics that adversaries use to leverage ChatGPT in a variety of cyberattacks. Attackers pose as regular users and manipulate ChatGPT’s vulnerability to malicious interactions, particularly in the context of cyber assault. The paper presents illustrative examples of cyberattacks that are possible with ChatGPT and discusses the realm of ChatGPT-fueled cybersecurity threats. The paper also investigates the extent of user awareness of the relationship between ChatGPT and cyberattacks. A survey of 253 participants was conducted, and their responses were measured on a three-point Likert scale. The results provide a comprehensive understanding of how ChatGPT can be used to improve business processes and identify areas for improvement. Over 80% of the participants agreed that cyber criminals use ChatGPT for malicious purposes. This finding underscores the importance of improving the security of this novel model. Organizations must take steps to protect their computational infrastructure. This analysis also highlights opportunities for streamlining processes, improving service quality, and increasing efficiency. Finally, the paper provides recommendations for using ChatGPT in a secure manner, outlining ways to mitigate potential cyberattacks and strengthen defenses against adversaries.

Arctic sea ice prediction holds significant importance for facilitating Arctic route planning, optimizing fisheries management, and advancing the field of sea ice dynamics research. While various deep learning models have been developed for sea ice prediction, they predominantly operate at the seasonal or sub-seasonal scale, often focusing on localized areas, and few cater to full-region daily scale prediction. This study introduces the use of spatiotemporal sequence data prediction models, namely, the convolutional LSTM (ConvLSTM) and predictive recurrent neural network (PredRNN), for the prediction of sea ice concentration (SIC). Our analysis reveals that, when solely utilizing SIC historical data as the input, the ConvLSTM model outperforms the PredRNN model in SIC prediction. To enhance the model's capacity to capture spatiotemporal relationships between multiple variables, we expanded the range of input data types to form the ConvLSTM-multi and PredRNN-multi models. Experimental findings demonstrate that the ConvLSTM-multi model excels in assimilating the influence of reanalysis data on sea ice within the sea ice edge region, thus exhibiting superior performance in predicting daily Arctic SIC over the subsequent 10 days. Furthermore, sensitivity tests on various model parameters highlight the substantial impact of sea surface temperature and prediction date on the accuracy of daily sea ice prediction. Additionally, meteorological and oceanographic parameters primarily affect the prediction accuracy of the thin ice region at the edge of the sea ice.

Screening of pollen traits in diploid wild potatoes (Solanum sect. Petota, Solanaceae) is desirable to develop heat-tolerant potato (S. tuberosum) cultivars. To accomplish this goal requires exploring potato genetic resources that are conserved in genebanks. The goal of this study was to assess pollen viability and 2n pollen production of the diploid potato wild relatives under heat stress condition. We assessed pollen viability and size of nine potato accessions conserved at the Embrapa Potato Gene Bank, including S. chacoense (BRA 00167447-2, BRA 00167017-3, BRA 00167023-1, BRA 00167028-0), S. commersonii (BRA00167007-4, BRA00167420-9, BRA00183760-8), and S. malmeanum (BRA 00183755-8), along with a control accession from the cultivated species S. tuberosum (BRA 00167251-8). The plant accessions were cultivated in different growth chambers, simulating both control temperature (ranging from 14 to 27°C) and supraoptimal temperature conditions (ranging from 24 to 34°C). At heat stress, the accessions BRA 00167251-8 did not bloom, and BRA 00167023-1 did not produce pollen. The remaining accessions did not exhibit a significant reduction in pollen viability as the temperature increased. Pollen viability at the control temperature had the lowest value in BRA-00167420-9 (S. commersonii) with 68.5% and the highest in BRA 00183755-8 (S. malmeanum) with 100%. At the supraoptimal temperature the lowest value was in BRA 00167420-9 (S. commersonii) with 54.5% and the highest in BRA 00183755-8 (S. malmeanum). The average of pollen size was 20 μm in all wild potato genotypes, and the increase of temperature did not lead to 2n pollen production. Estimated Genotypic Coefficient of Variation (GCV) was lower than Phenotypic Coefficient of Variation (PCV) for pollen viability. The observed heritability values ranged from 58.82% in BRA00167007-4 to 91.32% in BRA 00183755-8. Our results highlight the genetic variability available in wild potato germplasm concerning pollen viability under heat stress. Furthermore, these first insights offer valuable guidance for ongoing and future endeavors in diploid potato breeding.

The UV/Vis absorption energies (νmax) of different solvatochromic probes measured in co-solvent/water mixtures are analysed as a function of the average molar concentration (Nav) of the solvent composition. Nav is discussed in terms of the underlying average molar mass (mol average or mass average) of the mixture. ET(30) of Reichardt`s dye B30 is the focus of the analysis. Methanol, ethanol, 1,2-ethanediol, 2-propanol, 2-methyl-2-propanol, 2-butoxyethanol, formamide, N-methylformamide (NMF), dimethylformamide (DMF), N-formylmorpholine (NFM), 1,4-dioxane and DMSO were used as co-solvents. Significant linear dependencies of ET(30) as a function of Nav can be demonstrated for formamide/water, 1,2-ethanediol/water, NMF/water and DMSO/water mixtures over the whole composition range. These mixtures belong to the group of solvents that do not enhance the water structure according to the Marcus classification. The specifics of the 1,4-dioxane/water mixtures are discussed. For alcohol/water mixtures with enhanced water structure, the influence of the solvent microstructure on ET(30) is particularly evident.

Soil sodicity is a major constraint to seedling emergence and crop production, potentially reducing plant growth due to physical and chemical constraints. Examining responses to ion imbalances may assist in the identification of genotypes tolerant to chemical constraints in sodic soils and improve productivity. We evaluated the performance of four wheat (Triticum aestivum. L) genotypes in solutions with five sodium adsorption ratios (SARs) ranging from 0 to 60. For all four genotypes, seedling emergence and shoot dry matter (DM) decreased significantly with increasing SAR. A significant positive correlation was observed between Ca concentration in roots, as well as both root and shoot DM for all genotypes. At SAR values &gt;20, a more tolerant genotype (EGA Gregory), had higher Ca concentrations in root tissues, while a more sensitive genotype (Baxter) exhibited Na-induced Ca deficiency. Thus, selection for genotypes that are able to accumulate Ca in roots in sodic conditions may be a useful trait for selecting genotypes tolerant of soils with high ESP values. However, for soils that restrict plant growth at ESP (SAR) values of 6-10%, it is likely that growth is restricted by physical constraints rather than by a Na-induced Ca deficiency.

The airflow carried by artificial aeration provides oxidant O2 for microbial growth and mineral dissolution in heap bioleaching. To investigate the effect of forced aeration rate on bioleaching of low-grade copper sulfide ores, column bioleaching experiments with six columns were conducted in the aeration range of 0~150 L/h at 30~45 ℃. The results showed that when the aeration rate was higher than 95 L/h, the proportions of heap settlement and fine particles mass were much greater than that without aeration. The final total Fe concentration and bacterial cell numbers in pregnant leach solution increased with the increase of aeration rate.The final concentrations of Cu2 + in the mother liquor under aeration conditions of 60-150 L / h were 1.411, 1.432, 1.498, 1.491 and 1.583 g / L, respectively, which were higher than 1.345 g / L under non-aeration conditions. When the aeration rate was 150 L / h, the final Cu leaching rate was 80.1 %, which was 11.4 % higher than that without aeration ( 68.7 % ). Furthermore, in the early stage of leaching, copper leaching rate with 95 L/h aeration rate remained the highest. 结论Artificial aeration accelerates the bioleaching of low-grade copper sulfide ores by improving porosity structure, temperature range of bacterial activity and microbial catalyzed dissolution of targeted minerals.

Based on the teaching material of "Robotics" course, this paper studied the automatic knowledge graph construction, including knowledge points extraction and knowledge point relation extraction. We proposed a new method of extracting the first-level, second-level, and third-level knowledge points as well as their prerequisite relations of knowledge points in the textbook. For the problem of insufficient knowledge of the pre-trained language model in the specific field, methods such as incremental pre-training and optimization of cost functions are employed to integrate subject knowledge into the pre-trained language model, thus improving its effectiveness. To overcome the problem that the traditional method of relationship extraction can not be applied directly to the extraction of teaching materials, a new scheme for knowledge point relationship extraction based on keyword relationship is proposed. The experimental data from textbooks shows that the F1 score of knowledge point extraction reaches 93%, considerably improved compared to the traditional model. Consequently, the knowledge point entity extraction and relationship extraction methods based on the pre-trained model can effectively extract structured information and facilitate the automatic construction of knowledge graphs.

Time-series analysis is a widely used technique across various fields and industries, as it helps in understanding, predicting, and forecasting the behavior of data points over time. These fields include but are not limited to finance, economics, healthcare, transportation, etc. In the case of this paper, we have focused on finance. Predicting future values of financial time series offers several benefits. Accurate forecasts can help investors make better decisions about their investments. To predict future values, deep learning algorithms are commonly used since it is an effective method with complex data. In this study, we conduct a study that investigates the use of different data pre-processing techniques on deep learning algorithms in predicting the time series values. To conduct this experimental study, we utilize an open source software, which using long short-term memory technique as the representative deep learning technique, published in github software code repository platform. With this study, we investigate the effects of autoencoder and discrete wavelet transform data pre-processing techniques in time-series prediction. We discuss the details of the experimental study and report our results. The results show that time series prediction (using backtesting methodology) without any data pre-processing leads to 12.6% for mean absolute percentage error. The results also show that, time series prediction with the data preprocessing techniques (Wavelet Transform and Stacked Autoencoder) lead to 3.4%

Over the last decade, highly pathogenic avian influenza (HPAI) has severely affected poultry production systems across the globe. In particular, massive pre-emptive depopulation of all poultry within the certain distance has raised concerns regarding animal welfare and food security. Thus, alternative approaches to reducing unnecessary depopulation, such as risk-based depopulation, are highly demanded. This paper proposes a data-driven method to generate a rule table and risk score for each farm to identify preventive measures against HPAI. To evaluate the proposed method, 105 cases of HPAI occurring in a total of 381 farms in Jeollanam-do from 2014 to 2023 were evaluated. The accuracy of preventive measure identification was assessed for each case using both the conventional culling method and the proposed data-driven method. The evaluation showed that the proposed method achieved an accuracy of 84.19%, significantly surpassing the previous 10.37%. The result was attributed to the proposed method reducing the false-positive rate by 83.61% compared with the conventional method, thereby enhancing the reliability of identification. The proposed method is expected to be utilized in selecting farms for monitoring and management of HPAI.

Milk MIR spectra have been shown to provide valuable information on a wide range of traits to be used in dairy cattle breeding programs. Selecting the most informative variables from complex data can improve prediction accuracy and model robustness and, consequently, the interpretability of MIR spectra. Thus, we aimed to investigate the prediction performance of feature selection methods based on MIR spectra data, using the milk fatty acid (FA) profile as an example to illustrate the evaluated procedure. Data of MIR spectra, milk test-day records, and reference FA concentrations of 155 first-parity Holstein cows were used in the analyses. Four models comprising different explanatory variables and five feature selection methods were evaluated. The results indicated that the Competitive Adaptive Reweighted Sampling (CARS) method can effectively select the most informative variables from the MIR spectra, resulting in higher prediction accuracies than other variable selection approaches. The model including selected MIR spectra and cow information variables [days in milk at the test day, age at the test day, pregnancy stage (in days), number of days open, number of inseminations, and somatic cell count] yielded the best FA profile predictions based on Partial Least Square regression. In particular, ten FAs (C8:0, C10:0, C14:1, C17:0 isomers, C18:1, C18:1 isomer, medium-chain FA, unsaturation FA, monounsaturated FA, and polyunsaturated FA) presented accuracies based on the determination coefficient (R2cv) ranging from 0.66 to 0.85 in internal validation and from 0.65 to 0.84 in external validation. By running CARS 1,000 times in internal validations, we obtained the frequency of selected milk MIR wavenumber for 35 FAs. The most related wavenumbers to FAs were found within 1,003 to 1,145 cm-1, while other discrete areas were between 1,651 to 1,797 and 2,834 to 2,954 cm-1. These biomarkers may give insights into the relationship between MIR spectra and FA phenotypes. In conclusion, using CARS and cow information improved predictions of FAs based on MIR spectra in Chinese Holstein dairy cows. Additional validation studies should be conducted as larger datasets become available.

BACKGROUND: Pre-marital sex is a sexual interest practiced by people who are yet to get married and has ended up being accepted specifically in western countries. Sex before marriage is sexual behavior engaged in by single people. In the past, having sex before getting married is seen as a moral dilemma that many cultures forbade and that many people regarded to be sin in many religions, although it has gained wider acceptance across the board. OBJECTIVES: This study was carried out to determine the perception, practices, and factors associated with pre-marital sex, courtship, and its influences among Osun State University Undergraduates, Osogbo, Osun State. METHODOLOGY: The study was a descriptive study, and respondents were selected using multi-stage sampling technique. Students of Osun State University, Osogbo main campus form the population of the study and its sample size was calculated using Leslie Kish’s formula. A total of 387 responses were validated from the survey. The instrument for data collection was a self-administered semi-structured questionnaire consisting of four sections. The data obtained were collated, examined for completion, coded, imputed, and analyzed using SPSS v21. RESULTS: The mean age of the respondents was between 19.19±2.17, and the majority were between 18 – 24 years. About 52% of the respondents show a positive perception of premarital sex and courtship. Also, in the practice of courtship majority (88.3%) of the respondents think those that go around together are courting and from the responses obtained and analyzed from the factors leading to pre-marital sex, the findings revealed that peer pressure (90.4%), Internet (86.7%), pornography (83.9%) and drugs (82.9%) are the leading factors which contribute to pre-marital sex among undergraduates. CONCLUSION: The study hereby recommends that Parents should as a matter of responsibility monitor and pays regular visits to their children in the universities and provide them with materials that will make them stay comfortable for them not to fall victim to peer pressure.Pre-marital sex is a practice that should be avoided by undergraduate students, though most students consider courtship as a normal practice, it is still used as a normal factor that leads them to practice pre-marital sex.

Understanding the evolving hydrological characteristics of landslide-induced barrier lakes is crucial for flood control, forecasting, early warning, and safety measures in the reservoir area. This study examines the changes in hydrological characteristics of the Attabad landslide-dammed lake over the past decade after the occurrence of the landslide, focusing on lake area dynamics and sediment concentration. High-resolution satellite images from QuickBird, Pleiades, and WorldView2 over seven periods were analyzed. The findings indicate that the lake area has gradually decreased, with the center of mass shifting towards the lake dam, indicating a trend towards stability. The suspended sediment in the barrier lake is distributed in a strip running from north to south, then northeast to southwest, with sediment concentration decreasing from the lake entrance to the dam and from the lake bank to the center. Over time, the average sediment concentration has decreased from 2010 to 2020, with higher concentrations in summer than in winter. Notably, during the 2017-2020 period, the lower-middle parts of the lake experienced higher sediment concentration, while the dam area witnessed lower concentrations, thereby reducing the sediment impact on the dam.

Empowering teachers with Critical Thinking and understanding of sustainability is vital for guiding students’ informed decisions and actions in today’s world. Higher education needs innovative, student-centered methods like case-based teaching in order to promote Critical Thinking and the principles of Education for Sustainable Development. The aim of the study was to explore and evaluate pre-service teachers' Critical Thinking when engaged with case studies in a practicum preparation course centered on Education for Sustainable Development. Nine undergraduate students in Teacher Education participated in the study and answered four case studies. The case studies’ responses were analyzed through a bottom-up content analysis revealing eight higher-order categories. While approaching the case studies, student-teachers followed thinking processes similar to the processes proposed by the iterative models of Critical Thinking as perceived by Garrison (1991) and/or Brookfield (1987). Nevertheless, in some cases, pre-service teachers’ disengagement was evident. The rubric assessment highlighted that the responses fell under three profiles, namely the “Deficient Critical Thinker”, the “Emerging Critical Thinker” and the “Competent Critical Thinker”. The findings emphasize the need for targeted and individualized teaching interventions in teacher higher education programs aiming at Education for Sustainable Development complying with the learning needs of student-teachers’ Critical Thinking profiles.

The objective was to compare the failure loads of glass ceramic, and polymer crowns against yttria-partially stabilized zirconia (Y-PSZ) crowns with varying yttria concentrations. Monolithic crowns of zirconia (Cercon XT, Katana UTML, BruxZir Anterior), glass ceramic (Celtra press, IPS e.max press, Lisi press), and polymeric materials (Trilor, Juvora, Pekkton) were fabricated and cemented to epoxy abutments. The total number of specimens was 135 for crowns and 135 for discs (15 specimens per material type and design). A universal testing machine was used to perform compressive loading of all crowns to failure with a steel hemisphere along the longitudinal axis of the abutments. Energy dispersive spectroscopy (EDS) was used to identify the concentration (mol% yttria-partially stabilized zirconia) for each zirconia brand. The data were analyzed using a generalized linear model and regression analysis. The results revealed significant differences (P < .05) in mean failure loads for different crown materials: Trilor (6811 ± 960 N) > Juvora (5215 ± 151 N) > Cercon (4260 ± 520 N) = BruxZir (4186 ± 269 N) = e.max (3981 ± 384 N) > Katana (3195 ± 350 N) = Lisi (3173 ± 234 N) = Pekkton (3105 ± 398 N) > Celtra (2696 ± 393 N). EDS showed that the zirconia materials contained yttria at different concentrations (BruxZir = 5Y-PSZ, Cercon = 4Y-PSZ, Katana = 3Y-PSZ). The yttria concentration had a significant effect on the failure load of the Katana (3Y-PSZ) crowns, which revealed lower failure loads than the Cercon (4Y-PSZ) and BruxZir (5Y-PSZ) crowns. New zirconia materials are provided with different yttria concentrations (3Y-, 4Y-, and 5Y-PSZ). Since a higher yttria concentration increases the translucency, clinicians should be aware that 4-5 wt% yttria-partially stabilized zirconia materials provide comparable or higher mechanical properties than e. max glass ceramic for dental application of crowns.

Pre-exposure prophylaxis for COVID-19 with Tixagevimab/Cilgavimab in immunocompromised patients has reduced the risk of breakthrough infection, disease, hospitalization, and COVID-19 related mortality. However, the advent of the Kraken variant (XBB.1.5) has limited the use of this monoclonal antibody, based on poor efficacy in in vitro studies The objective of the study was to evaluate the risk of breakthrough infection, symptomatic disease, hospitalization, intensive care admission and COVID-19 related death in kidney transplanted recipients receiving pre-exposure prophylaxis with Tixagevimab/Cilgavimab for COVID-19 in the era of the Kraken variant (XBB.1.5). In a prospective, observational study, we enrolled kidney transplant patients undergoing pre-exposure prophylaxis for COVID-19 with Tixagevimab/Cilgavimab at the Division of Infectious Diseases of Federico II University of Naples between February 2023 and August 2023. Each patient subsequently underwent a six-month follow-up with symptom monitoring and surveillance nasopharyngeal swab for SARS-CoV-2 RNA detection every 30 days, regardless of symptoms. Thirty-four kidney transplant patients were enrolled and in the follow-up period, only one tested positive for the nasopharyngeal swab for SARS-CoV-2 research with asymptomatic infection and virological recovery on the eighth day from the diagnosis of infection. Therefore, no patient developed disease and no patient needed hospitalization and no death occurred. No adverse drug reaction to Tixagevimab/Cilgavimab occurred. Our data, although derived from a limited and uncontrolled sample, show the potential of Tixagevimab/Cilgavimab as a valid and viable therapeutic strategy in pre-exposure prophylaxis for immunocompromised patients. These findings highlight the importance of conducting clinical studies on this topic.

Due to similarities in genetics, cellular response, and behavior, Drosophila is used as a model organism in addiction research. A well described behavioral response examined in flies is the induced increase in locomotor activity after a single dose of volatilized cocaine (vCOC) and volatilized methamphetamine (vMETH) known as sensitivity, and the escalation of the locomotor response after the repeated dose, known as the locomotor sensitization. However, knowledge about how vCOC and vMETH affect different neurotransmitter systems over time is scarce. We used LC-MS/MS to systematically examine changes in the concentration of neurotransmitters, metabolites and non-metabolized COC and METH in the whole head homogenates of male flies one to seven hours after single and double vCOC or vMETH administrations. vMETH leads to complex changes in the levels of examined substances over time, while vCOC strongly and briefly increases concentrations of dopamine, tyramine and octopamine followed by a delayed degradation into N-acetyl dopamine and N-acetyl tyramine. The first exposure to psychostimulants leads to significant and dynamic changes in the concentrations relative to the second administration when they are more stable over several hours. Further investigations are needed to understand neurochemical and molecular changes post-psychostimulant administration.

This study leverages transformer-based models and focuses on data representation strategies in the named entity recognition task, including "single" (one sentence per vector), "merged" (multiple sentences per vector), and "context" (sentences joined with attention to context). Performance analysis reveals that models trained with a single strategy may not perform well on different data representations. A combined training procedure is proposed to address this limitation, using all three strategies to enhance the stability and adaptability of the model. The results of this approach are presented and discussed for various datasets for four languages (English, Polish, Czech, and German), demonstrating the effectiveness of the combined strategy.

This study assessed the acute effects of oral methylliberine (DynamineTM) supplementation on cognitive function and indices of well-being. This was a double-blind, randomized, within-subject crossover trial. 25 healthy men and women (33.5±10.7yr, 172.7±8.6cm, 73.3±11.0kg) underwent pretesting before ingesting methylliberine (100mg) or placebo (PLA) for 3 days. On the fourth day participants were tested before their 4th dose (baseline) and every hour post-ingestion for 3 hours. After a one-week washout period, participants repeated testing with the alternate investigational product. The testing battery consisted of vitals, Stroop test and Trail Making Test-B, and visual analog scales that assessed various indices of well-being. Mixed factorial ANOVA with repeated measures were used to assess all variables. There were significant (p≤0.050) interactions in concentration, motivation, and mood. Methylliberine improved concentration 1- and 3-hours, motivation 3 hours, and mood 1-, 2-, and 3 hours (p≤0.050). Methylliberine improved energy, sustained energy, and mood in all participants to a greater extent than PLA at 1-hour and 3-hours relative to baseline (p≤0.050). PLA improved motivation at 1- and 2-hours and mood at 2-hours (p≤0.050). Methylliberine improved concentration, well-being, and the ability to tolerate stress to a greater extent than PLA at 3-hours relative to baseline (p≤0.050). Women observed elevations in sustained energy 1- and 3-hours (p≤0.050) in methylliberine vs. PLA. Methylliberine had negligible influence on cognitive function, vitals (p>0.050), and no adverse events were reported. Methylliberine significantly improved subjective feelings of energy, concentration, motivation, and mood, but not cognitive function. PLA improved motivation and mood at hours 1 and 2, while methylliberine sustained benefits for longer. Methylliberine also improved concentration, well-being, and the ability to tolerate stress to a greater degree than PLA while having no detrimental effects on vital signs. Methylliberine also seems to have a positive impact on sustained energy in women.

Artificial intelligence (AI)-based models hold the potential to transform higher education if adopted properly and ethically. A prime example is ChatGPT with earlier studies indicating its widespread adoption in academia and by university students. The current study aimed to identify the factors influencing the attitude towards ChatGPT and its usage among university students in Arab countries. A previous survey instrument termed Technology Acceptance Model Edited to Assess ChatGPT Adoption (TAME-ChatGPT) was administered online using a convenience-based approach among the contacts of the authors. Confirmatory factor analysis (CFA) for the survey constructs was done using root mean square error of approximation (RMSEA), standardized root mean square residual (SRMR), comparative fit index (CFI), and Tucker-Lewis index (TLI). The final study sample comprised a total of 2240 participant divided as follows: Iraq (n=736, 32.9%), Kuwait (n=582, 26.0%), Egypt (n=417, 18.6%), Lebanon (n=263, 11.7%), and Jordan (n=242, 10.8%). A total of 1048 respondents heard of ChatGPT before the study (46.8%), of which 551 used ChatGPT (52.6%). The mean scores of TAME-ChatGPT constructs showed that the ease of ChatGPT use, positive attitude towards technology and social influence, higher perceived usefulness, the influence of behavioral/cognitive factors, low perceived risks and low anxiety were the determinants of positive attitude to ChatGPT and its use. For both the attitude and usage scales of TAME-ChatGPT, CFA collectively yielded satisfactory fit indices as indicated by low RMSEA and SRMR together with high CFI and TLI. Multivariate analysis showed that attitude to ChatGPT use was significantly influenced by country of residence, age, university type, and the latest grade point average of the students. The current study confirmed the validity of TAME-ChatGPT as a survey instrument to assess the possible determinants of ChatGPT use among university students in Arab countries. The study findings highlighted that successful adoption of ChatGPT in higher education could be dependent on perceived ease of use, usefulness, positive attitudes to technology, social influence, behavioral/cognitive factors, lower anxiety, and minimal perceived risks. The utility of ChatGPT in higher education requires policies that should be tailored for various settings, considering the differences observed in attitude towards ChatGPT among participating students in this study.

The violence against women is a theme that extrapolates health issues, since after a victim seek for a health care, there is the notification of the act [1]. In Brazil, many times, these women are first assisted by mobile urgency services (SAMU/SIATE) and, as far as we have concern, there are no other studies with specific data about these assistance. The present paper aimed to analyze SAMU/SIATE assistance to abused women. Qualitative and retrospective epidemiological study of assistance to assaulted women carried out by SIATE and SAMU Maringá/Norte Novo between 2011 and 2020. Women between 20 and 39 years old, non-pregnant, were the main victims, and 19,52% of them have used some kind of drug. The (ex)partner figured as the perpetrator in 17,35%, but there were no information about this variable in 73,75% of the records. The Qui-square test shows a mortality rate superior to 70% among the severe traumatized victims. This is one of the first studies to analyze this kind of care provided by SAMU/SIATE, and reveals some gaps in its “modus-operandi” that can limitate an extrapolation of the results to bigger spheres. More researches in mobile urgency care services, in other provinces also, are needed to propose strategies to fight against this epidemic.

Based on the analysis of the spatial distribution of uranium grade in 348 boreholes of a uranium deposit in Xinjiang, the enrichment and spatial variation of uranium ore in two stopes of the deposit are discussed by using multifractal theory. The distribution characteristics of uranium ore of the two stopes are studied by multifractal parameters: the scaling exponent of mass , the scaling exponent of each sub-set and its corresponding fractal dimension , the fractal dimension D0 and information dimension D1. The differences of uranium distribution in two stopes can be well quantified by multifractal spectrum and multifractal parameters( , , ).10m×10m is defined as a fence unit, and the window sizes are respectively set, the singularity exponent of the two stopes are calculated by this element concentration-area(C-A) method. The results show that the multifractal theory and model can organically combine spatial structure information, scale change information and anisotropy information to obtain low-grade and weak mineral resources information, and can effectively distinguish complex and superimposed anomalies. This will provide a basis for local concentration and spatial variation rules of uranium distribution and the design of the parameters of leaching uranium mining well site.

In this paper, we analyze the convergence of a finite difference method with the implicit forward time central space (FTCS) scheme for solving the three-dimensional advection-diffusion-reaction equation (ADRE). It is proved that the method is unconditionally convergent. We apply the scheme to obtain numerical solutions for the transport of pollutants in street tunnel problems with various reaction coefficients and various rates of change of concentrations of sources or sinks of pollution.

Red raspberry fruit production is increasing worldwide due to the growing consumer interest in foods with high antioxidant properties. However, raspberries are very perishable fruit with a short shelf life. Chitosan applications have shown promising results in promoting the storage of different berry fruit. This work aimed at analysing the effects of chitosan applied in pre- and/or post-harvest on the quality and antioxidant properties of raspberry fruit during the cold storage and room temperature conditions (i.e., 6 d at 4 °C and 3 d at 20 °C, respectively). Pre-harvest chi-tosan applications reduced fruit weight loss during cold storage and room temperature condi-tions but also reduced fruit decay at room temperature conditions. Furthermore, pre-harvest treatments with chitosan increased the total phenol and anthocyanin contents and promoted the highest total antioxidant activity with respect to other treatments. Of note, after the cold storage, post-harvest chitosan application drastically reduced the development of fungi that cause fruit decay, thus minimizing the potential risk of mycotoxin production. Overall, this study demon-strates that applications of chitosan in pre-harvest are sufficient to ensure the goal of maintaining and/or increasing the quality and antioxidant properties of fruit during cold storage and room temperature conditions.

Abstract. The paper presents primary material on determining the presence of micro- and macroplastics in Markakol Lake, one of the high-mountainous and unique water bodies of Kazakhstan, conditionally undisturbed, but vulnerable to anthropogenic pollution. In the course of work, micro- and macroplastics were detected in all selected samples in the water area of the lake and its main tributaries, the Urunkhaika, Topolevka, Tikhushka, Matabai, Elovka rivers. When determining micro- and macroplastics, we were guided by the method of analysis in aquatic environment, NOAA research program, developed by American scientists Masura J. et al, which is used in many countries. Concentrations and sizes of MP found in the water of the main tributaries of the rivers Urunhaika in concentrations up to 211.4 µg/m3, Tikhushka – 97.9 µg/m3, Zhirelka – 67.8 µg/m3, Topolevka – 157.2 µg/m3, Matabai – 78.3 µg/m3. Concentrations of MP in the surface water layer of the lake detected during 15 minute trawling at distances from 438 m to 841 m occur in sieve mesh sizes of 1.0 mm – 316.7 µg/m3 and 0.315 mm – 520.8 µg/m3. The total concentration of detected micro- and macroplastics coming with tributaries was – 150 µg/m3, in the lake water area – 837.4 µg/m3. The sizes of plastic debris found both in river waters and along the lake water area ranged from mesoplastic debris (fishing line net fragments, foam balls, plastic bags, plastic bottles, wrappers, food labels and packaging, etc.) to microplastic particles detected using a microscope with 40X magnification in size ranges of 25 mm, 1.0 mm and 0.315 mm. Sources of MP depend on local human activities (fishing, transportation, waste disposal etc.).

Agriculture is one of the indispensable fields for the survival of mankind. Potatoes also have a significant role in the field of agriculture. The quality and quantity of potatoes are significantly impacted by several diseases, such as early blight and late blight, and manual interpretation of these leaf diseases is time-consuming and inconvenient. Fortunately, leaf appearance is used to detect diseases in potato plants. Productivity will considerably rise if the infections are detected early. Different types of image processing methods and machine learning methods are used for early recognition of those diseases from leaf images so that the product losses are decreased significantly. For the incredible and marvelous performance of CNN, it is the most popular deep learning method that is used immensely for the recognition of leaf diseases from images. Several pretrained deep learning models, such as VGG16, ResNet50, InceptionV3, MobileNetV2, Xception, and a deep learning model developed using CNN, are employed for potato leaf disease classification and recognition on the same dataset. The transfer learning technique is applied to the pretrained model and the data augmentation technique is applied to the Proposed CNN model for potato disease classification from leaf samples. Compared to pretrained models, the proposed CNN model offers the lowest loss and highest accuracy for potato leaf disease detection while using fewer parameters and layers. It achieves the best performance with a test accuracy of 99.33% compared to other Pretrained models used in the diagnosis of potato leaf disease.

Earnings management and financial distress are two critical facets of financial management in corporations that have lately been the focus of thorough research from both scholars and practitioners. The purpose of the research is to evaluate the influence of financial distress on the earnings management of companies listed at the NSE during the pre- and post-COVID eras. Multiple linear regression was applied in this study to examine the causal association between earnings management and financial distress. To assess the effect of financial distress on earnings management, the study analyzed data from 37 listed companies during the pre-COVID and post-COVID periods. The methodology also takes into account control factors like firm size, GDP, and inflation. The pre-COVID research indicates a significant positive correlation between financial strain and earnings management. In contrast, the correlation between financial distress and earnings management is not statistically significant in the post-COVID analysis. However, research shows that firm size has a statistically significant negative influence on managing earnings. The results of this study show that smaller firms are more inclined to engage in earnings management during the post-COVID era than bigger ones.

Carbon (C) cycle n inland waters, including its concentrations and carbon dioxide (CO2) emis-sions from water surfaces are at the forefront of biogeochemical studies, especially in the re-gions, strongly impacted by on-going climate change. Towards better understanding of C stor-age, transport and emission in Central Asian mountain regions, extremely poorly studied until now, here we carried out systematic measurements of dissolved C and CO2 emissions in 15 riv-ers and 5 lakes located along a macro-transect of various natural landscapes in the Sayan-Altai mountain region, from high mountains of the Western Sayan in the northwest of Tyva to arid (dry) steppe and semi-deserts in intermountain basins of the southeast of Tyva, the border with Mongolia. New data on major hydrochemical parameters, CO2 fluxes by floating chambers, dis-solved organic and inorganic carbon concentrations collected over four main hydrological sea-sons allowed to assess the current C biogeochemical status of these water bodies in order to judge possible future changes under climate warming. We further tested the impact of perma-frost, river watershed size, lake area and climate parameters as well as ‘internal’ biogeochemical drivers (pH, mineralization, organic matter quality and bacterial population) on CO2 concentra-tion and emissions in lakes and rivers of this region, and compared them with available data on other subarctic and mountain settings.

In this report, we establish a straightforward method for estimating the equilibrium constant for the CK reaction over wide but physiologically and experimentally relevant ranges of pH, Mg2+ and temperature. Our empirical formula for CK Keq” is based on experimental measurements. It can be used to estimate [ADP] when [ADP] is below the resolution of experimental measurements, a typical situation because [ADP] is on the order of micromolar concentrations in living cells, and may be much lower in many in vitro experiments. Accurate prediction of [ADP] is essential for in vivo studies of cellular energetics and metabolism, and for in vitro studies of ATP-dependent enzyme function under near-physiological conditions. With [ADP], we could estimate ΔGATP. Application to actomyosin force generation in muscle provides support for the hypothesis that, when [Pi] varies but not when pH is altered, maximum Ca2+-activated isometric force depends on ΔGATP in both living and permeabilized muscle preparations. Further analysis of the pH studies introduces a novel hypothesis for the role of submicromolar ADP in force generation.

Serum albumin (ALB), one of the most important proteins in human physiology, has the main functions of maintaining plasma oncotic pressure and plasma volume, transporting hormones, vitamins, oligominerals and drugs, and exerting a powerful antioxidant-antiinflammatory role. Its prognostic value in liver and malabsorption syndromes is well known. In this narrative review, an analysis of the most important studies evaluating the prognostic significance of low serum ALB levels in hospitalized patients was performed. Specifically, the risk in emergency medicine, cardiovascular diseases, COVID-19 infection, nephrology, oncology and autoimmune rheumatic diseases has been examined to fully explore its clinical value. ALB is a negative acute-phase reactant and the reduction of its serum levels represents a threatening parameter for long-term survival in several clinical settings, and a strong poor prognostic biomarker in most diseases. Therefore, clinicians should consider serum ALB as a valuable tool to assess the efficacy of specific therapies, both in hospitalized patients and in chronic follow-up.

In this paper, the extraction of essential oil (EO) from thyme by consecutive use of ultrasound and microwave treatments is presented. The aim of the study was to apply an ultrasound pre-treatment of thyme leaves to enhance the thymol content and the extraction yield of the EO obtained by microwave-assisted hydro-distillation (MWHD). Compared with the conventional hydro-distillation (CHD), the consecutive use of ultrasound and microwave treatments resulted in a 72% lower extraction time. When the ultrasound pre-treatment (using the ultrasonic processor with an amplitude of 70%) was applied, the EO content was 23% higher compared to the extraction without pre-treatment. The EO samples were analyzed by GC/MS. The results showed that the major component, thymol, varied from 43.54% (by CHD) to 65.94% (by consecutive use of ultrasound and microwave treatments).

This article is a logical continuation of the work of Nuritdinov et al. (2021). We analyzed space observations of the apparent surface density of 81 globular clusters (GCs) observed by GAIA DR2 and published in de Boer et al (2019). First, we studied the features of the quality of the GC surface density data, including comparing them with the HST data. Using our 3-parameter model, previously tested on the example of HST space observations, we found the values of the stellar concentration parameter towards the center of the cluster. As a result, we found good correlations of this parameter with the physical characteristics of the GCs. We have also found the corresponding empirical formulas for this parameter.

Determining accurate PM2.5 pollution concentrations and understanding their dynamic patterns is crucial for scientifically informed air pollution control strategies. Traditional reliance on linear correlation coefficients for ascertaining PM2.5 related factors only uncovers superficial relationships. Moreover, the invariance of conventional prediction models restricts their accuracy. To enhance the precision of PM2.5 concentration prediction, this study introduces a novel integrated model that leverages feature selection and a clustering algorithm. Comprising three components - feature selection, clustering, and integrated prediction, the model first employs the non-dominated sorting Genetic Algorithm (NSGA-III) to identify the most impactful features affecting PM2.5 concentration within air pollutants and meteorological factors. This step offers more valuable feature data for subsequent modules. The model then adopts a two-layer clustering method (SOM+K-means) to analyze the multifaceted irregularity within the dataset. Finally, the model establishes the Extreme Learning Machine (ELM) weak learner for each classification, integrating multiple weak learners using the Adaboost algorithm to obtain a comprehensive prediction model. Through feature correlation enhancement, data irregularity exploration, and model adaptability improvement, the proposed model significantly enhances the overall prediction performance. Data sourced from 12 Beijing-based monitoring sites in 2016 were utilized for an empirical study, and the model's results compared with five other predictive models. The outcomes demonstrate that the proposed model significantly heightens prediction accuracy, offering useful insights and potential for broadened application to multifactor correlation concentration prediction methodologies for other pollutants.

(1) Background: Artificial Intelligence (AI) models have shown potential in various educational contexts. However, their utility in explaining complex biological phenomena, such as Intrinsically Disordered Proteins (IDPs), requires further exploration. This study empirically evaluated the performance of various Large Language Models (LLMs) in the educational domain of IDPs. (2) Methods: Four LLMs, GPT-3.5, GPT-4, GPT-4 with Browsing, and Google Bard (PaLM 2), were assessed using a set of IDP-related questions. An expert evaluated their responses across five categories: accuracy, relevance, depth of understanding, clarity, and overall quality. Descriptive statistics, ANOVA, and Tukey's honesty significant difference tests were utilized for analysis. (3) Results: The GPT-4 model consistently outperformed the others across all evaluation categories. Although GPT-4 and GPT-3.5 were not statistically significantly different in performance (p&gt;0.05), GPT-4 was preferred as the best response in 13 out of 15 instances. The AI models with browsing capabilities, GPT-4 with Browsing and Google Bard (PaLM 2) displayed lower performance metrics across the board with statistically significant differences (p&lt;0.0001). (4) Conclusion: Our findings underscore the potential of AI models, particularly LLMs such as GPT-4, in enhancing scientific education, especially in complex domains such as IDPs. Continued innovation and collaboration among AI developers, educators, and researchers are essential to fully harness the potential of AI for enriching scientific education.

Fatigue failure remains a critical concern in structural engineering and material science, prompting extensive research to understand and predict the behaviour of materials under cyclic loading conditions. The present study aims to investigate the fatigue life of carbon steel specimens containing opposite semicircular edge notches through a comprehensive experimental and numerical analysis. In this study, stress concentration factors (SCF, K_t) of rectangular plate with opposite semicircular notches are considered under uniform tensile stress to analyse the notch deformation because of stretching of plate. Furthermore, the research focuses on quantifying stress concentration factors (SCFs) for these notches based on S-N curves of carbon steel. The study employs a combination of experimental and numerical techniques to understand the influence of these notches on the fatigue performance of carbon steel structures. A plate with opposite semicircular edge single notches under the axial load creates stress concentration near the notch and it is much larger than the average stress on the plate. Both analytical and finite element methods are used to calculate the maximum stress around the notch. SOLIDWORKS Premium Student Edition 2023 has been employed for modelling and SOLIDWORKS Simulation Premium Student Edition 2023 has been used for stress analysis and fatigue notch factor of rectangular plate of size 31 mm x 25.4 mm x 6.35 mm. The uniform tensile load with a magnitude of 20195 N is applied on one sides of rectangular plate normal to the sides of notches with ratio h/r = 1, for the semicircular notch. The result obtained on both analytical and finite element methods are compared and the percentage of error has been evaluated. Subsequently, these specimens undergo fatigue testing under varying loading conditions to capture their fatigue behaviour. The acquired fatigue data is then plotted against stress amplitude to construct S-N curves, forming the foundation for assessing the fatigue life of the notched specimens. To complement the experimental findings and to gain a deeper understanding of the stress concentration phenomenon, numerical simulations are conducted using advanced finite element analysis (FEA) techniques. The finite element models are carefully calibrated against the experimental results to ensure their accuracy and reliability. The FEA simulations enable the determination of stress concentration factors at critical locations within the notched specimens, further validating the experimental observations. The investigation reveals crucial insights into the effect of opposite semicircular edge notches on the fatigue life of carbon steel structures. The obtained S-N curves allow engineers and designers to predict the fatigue life of components with similar notches, aiding in the development of reliable and durable structures in practical applications. Moreover, the stress concentration factors determined from the numerical simulations provide valuable data to assess the potential failure modes and to optimise designs, effectively mitigating fatigue-related failures. The combination of experimental and numerical approaches ensures a comprehensive and rigorous analysis of the fatigue behaviour in notched specimens, offering a reliable basis for making informed engineering decisions. The comparison between the analytical method and the Finite Element Method (FEM) demonstrated good agreement, with an error percentage of 4.272%. The analysis revealed that the specimen would experience failure after approximately 2882 cycles, with a maximum stress of 395.914 MPa. This research study enhances the understanding of fatigue life in carbon steel structures containing opposite semicircular edge notches and contributes valuable data to the field of fatigue mechanics. The outcomes serve as a valuable resource for professionals engaged in structural engineering, material science, and design optimisation, ultimately leading to safer and more durable industrial components in critical applications. The findings of this research contribute to the understanding of fatigue behaviour in carbon steel components with stress concentration effects caused by semicircular notches. Moreover, the validated numerical simulations and data curves facilitate the prediction of fatigue life and aid in determining the critical conditions leading to fatigue failure. In conclusion, this research highlights the significance of combining experimental testing with numerical simulations to comprehensively analyse the fatigue life of carbon steel specimens with opposite semicircular edge notches. The obtained stress concentration factors provide crucial information for structural integrity assessment and offer potential for further optimising design criteria to mitigate fatigue-related failures. The findings of this study could play a vital role in enhancing the reliability and safety of carbon steel structures subjected to cyclic loading conditions. The comprehensive experimental and numerical analyses establish a foundation for future studies exploring other materials and geometries with notches, fostering advancements in fatigue life prediction and structural integrity assessment.

Neuromonitoring of the efferent nerve impulses transmission in the spinal cord tracts during surgical scoliosis treatment makes it possible to assess whether the functional status is deteriorating, affecting the procedure's safety. Is there any relationship between pre- and intraoperative motor evoked potentials recordings and does idiopathic scoliosis (IS) surgical correction improve directly the spinal efferent transmission? This study aimed to compare the results of surface recorded electromyography (EMG), electroneurography (ENG, M and F-waves), and especially motor evoked potentials (MEP) from tibialis anterior (TA) muscle bilaterally in 353 girls with the right idiopathic scoliosis (types 1A-4C according to Lenke classification). It has not yet been documented whether the results of MEPs recordings induced by transcranial single magnetic stimulus (TMS, pre – and postoperatively) and trains of electrical stimuli (TES; intraoperatively in T0-before surgery, T1 – after pedicle screws implantation, T2 – after scoliosis curvature distraction and derotation following two rods implantation) can be compared for diagnostic verification of improvement of the spinal neural transmission. The study also attempted to determine whether the constant level of optimal anesthesia during the certain surgical steps of scoliosis treatment affects the parameters of MEPs recorded during neuromonitoring procedures. No neurological deficits have been observed postoperatively. Values of amplitudes but not latencies in MEPs recordings evoked with TMS in IS patients compared before and after surgery indicated a slight improvement in the efferent transmission of neural impulses within the fibers of the spinal tracts postoperatively. Results of all neurophysiological studies in IS patients were significantly asymmetrical and recorded worse on the concave side, suggesting greater neurological motor deficits at p=0.04. This asymmetry had been significantly reduced following IS surgery. The surgeries in IS patients brought significant improvement (p=0.04) in parameters of amplitudes of sEMG recordings, however reflecting still the consequences of the neurogenic injury of TA muscle motor units. ENG studies results indicated the symptoms of the axonal type injury in peroneal motor fibers improved only on the concave side at p=0.04 in parallel with the significant improvement of F-waves parameters, which suggests that surgeries might result in the lumbar ventral roots decompression. There were not detected significant differences in amplitudes or latencies of MEPs induced with TMS or TES comparing the parameters recorded preoperatively (one day before surgery) and intraoperatively in T0. The amplitudes of TES evoked MEPs increased gradually at p=0.04 in the subsequent periods (T1 and T2) of observation. The significant reduction of MEPs latency at p=0.05 was observed only at the end of the IS surgery. Studies on the possible connections between the level of anesthesia fluctuations and the required TMS stimulus strength, as well as the MEPs amplitude changes measured in T0-T2 revealed lack of relationships. It is not likely that they could be the factors influencing the efferent transmission in spinal pathways beside the surgical procedures. Considering that MEPs amplitude parameter reflects the number of axons excited from the motor cortex and transmitting the efferent impulses via spinal descending tracts in the white matter, pre- (TMS evoked) and intraoperative (TES evoked) recordings are reliable for evaluating the patient’s neurological status before and during surgical scoliosis correction procedures. The results of this study indicate an agreement between preoperative and early-intraoperative evaluations with these both diagnostic methods. An increase of MEPs amplitude parameters recorded on both sides after scoliosis surgery proves immediate improvement of the total efferent spinal cord transmission. Considering comparative pre- and postoperative sEMG and ENG recordings it can be concluded that surgeries might directly result in the additional lumbar ventral roots decompression. Our results of the tests on the possible variability of the anesthesia level on the parameters of intraoperative recorded MEPs show no clear relationships. We can conclude that MEPs parameters changes are determined by the surgery procedures during neuromonitoring, not the anesthesia conditions if they are kept stable, which influences a decrease in the number of false-positive neuromonitoring warnings. Further studies on a larger population of patients with long-lasting observation postoperatively are required to confirm the presented conclusions on the direct influences of scoliosis surgery on improvement of the motor function in patients with IS.

One of the drawbacks of natural fibers and their composites is their inherent hydrophilic nature. The effect of moisture on mechanical properties of a composite is irrefutable. This study deals with hygroscopic characteristics of Enset-PLA composites and its effect on the mechanical properties of the composite. To do this, injection molded composite specimens of different fiber volume fraction; plasticizer ratio, fiber length, and fiber age have been considered. The specimens are exposed to distilled water and the moisture absorption was monitored on a daily base. Subsequently, the specimens are subjected to mechanical loading to determine the effect of moisture on their Strength, Stiffness and strain at break strength. Lastly, individual and joint effects of considered factors have been scrutinized using optimal design of experiment. The result from the study shows that maximum and minimum moisture uptake is noticed for 25% and 10% fiber ratio respectively. Due to moisture effect, tensile and bending strength is decreased by 11% and 5% respectively for 15% fiber volume fraction; while 16% and 13% for 25% fiber volume fraction respectively. Increasing amount of plasticizer increases moisture resistance. The result indicate that Enset-PLA composite have competitive properties and stability when exposed to moisture.

Background: Depending on the phase of the menstrual cycle the athlete is in, some kinetic, physiological and fatigue variables will show differences. The aim of this study is to analyze whether there are changes in these variables over the course of the menstrual cycle. Methods: Eight regular female runners and triathletes performed a maximal treadmill test, as well as a submaximal test (6’ stages at 50%, 60% and 80% of maximal aerobic speed) in each of the phases of the menstrual cycle: bleeding phase (day 2.4 ± 0.7), follicular phase (day 10.4 ± 2.2) and luteal phase (day 21.8 ± 2.1). Running dynamics were measured (using RunScribe) at the end of each test, as were lactate concentration, heart rate and fatigue (evaluated on a scale of 0 to 5). Results: Higher shock (G) values were recorded in the bleeding phase and higher vertical spring stiffness (kN/m) in the follicular phase. The phase of the menstrual cycle had a significant effect on average and peak heart rate, which was significantly higher in the follicular phase. Conclusions: Higher vertical spring stiffness was observed in the follicular phase, as well as higher peak and average heart rate.

AgW materials exhibit excellent properties and are widely used as contact materials in low- and medium-voltage switches. In this study, a pre-sintering and infiltration method was employed to pre-sinter W powder with Cu, Ni, and (Cu+Ni) addition in the low temperature range of 950–1050 °C. The low-temperature sintering behaviours of W skeletons with different additives were investigated. Subsequently, AgW70, AgW75, AgW80, and AgW85 materials were prepared through infiltration at 1050 °C. The microstructure morphology and physical properties of high-W contact materials were investigated using a metallographic microscope and scanning electron microscope. The mechanism of low-temperature sintering-infiltration of high-W contact materials was elucidated. The results indicated that pure W and 1% Cu-added W skeletons experience minimal linear shrinkage within the temperature range of 950–1050 °C. The linear shrinkage curves of W skeletons with different additives coincided under the conditions of 950–1000 °C/90 min. At 1050 °C, after sintering for 150 min, the particle boundaries in the W skeleton were fully spheroidised, with a dihedral angle of 120°. At 1050 °C and after 150 min of infiltration, cross-sectional micrographs of the AgW material revealed the presence of irregular Ni layers, where Ni spatially enveloped/encapsulated Ag. With an increase in the W content, the electrical conductivity and relative density of AgW(70–85) materials decreased, whereas the hardness of the materials increased.

For the purpose of clean energy hydropower development, the construction of reservoirs has been continuously promoted in the Jinsha River basin for many years, and how the reservoirs affect the water and sediment process is a very necessary topic to study. This study is based on the gauged water and sediment data (span from the 1960’s to 2020) at Shigu, Panzhihua, and Xiangjiaba stations downstream located in the trunk channel of the river, and uses Mann-Kendall trend test method and double cumulative curve method to comprehensively judge the variation trends of runoff and suspended sediment load and reveal their credible mutation years. The linear regression method is used to reveal the variation characteristics of the relationship between water and sediment before and after the abrupt change years. The results show that the variations in runoff at Shigu and Panzhihua stations have significant and relatively obvious increasing trends, respectively, and that at Panzhihua station has a mutation year of 1985. The runoff at Xiangjiaba Station slightly increased but not significantly. The variation of suspended sediment load showed a temporal and spatial differentiation. The variation of sediment discharge at Shigu Station showed an increasing trend with a mutation year of 1997. For Panzhihua Station, it showed an increasing trend before 1998, but has significantly decreased since 1998. The fluctuation of sediment transport at Xiangjiaba Station was significant before 1998, but the trend is unclear. In the period of 1998−2020, it showed a significant decreasing trend, especially since 2013, when the mean annual suspended sediment load only accounted for 0.61% of its multi-year average. The variations of mean annual sediment concentration and sediment inflow coefficient at the hydrological stations is consistent with the variation trend of sediment transport. Before 2013, the correlation between water and sediment was strong, but thereafter it was extremely weak. The two sudden years of 1998 and 2013 are consistent with the year when large reservoirs were built in the river basin. The construction of large reservoirs and their large amount of sediment retention are the key reasons for the sudden changes in the water-sediment relationship and the sharp decrease in sediment transport in the downstream reach of the reservoir dam. The climate and underlying surface changes in the study area are not significant, and their impact on the water and sediment processes in the watershed is limited.

Sources of resistance to powdery mildew in wild barley (Hordeum vulgare subsp. spontaneum) collected in Jordan, Lebanon, and Libya Jerzy H. Czembor 1, *, Elżbieta Czembor 1 1 Plant Breeding and Acclimatization Institute – National Research Institute (IHAR-PIB), Radzikow, 05-870 Błonie, Poland; e.czembor@ihar.edu.pl (E.C.) *Correspondence: j.h.czembor@ihar.edu.pl) Abstract Barley powdery mildew (BPM) is caused by the pathogen Blumeria graminis f.sp. hordei (Bgh). It is an economically important disease and plant pathologists are looking for new sources of resistance to BPM. Barley genetic resources present in gene banks are often a rich source of disease resistance to be used by breeders. These new sources of resistance to BPM are often used in combination (pyramiding) with those that are already used in modern cultivars. Barley accessions, including the wild subspecies Hordeum vulgare subsp. spontaneum (Hvs), are stored in many gene banks and often are a valuable source of economically important characteristics. This source of biodiversity should be more efficiently used to improve barley in the process of plant breeding. However, their proper characterization and availability are urgently needed. The resistance to BPM in 81 accessions of wild barley (Hvs) collected in Jordan (47), Lebanon (23), and Libya (11) was investigated. The seed samples of these accessions were obtained from the ICARDA gene bank and collected in 10 expeditions from 1981 to 1995. Twenty European differential isolates of BPM were used to select accessions with efficient resistance. Thirty-one resistant single plant lines were selected from 15 accessions from Jordan and Libya based on tests performed with the most avirulent isolate of Bgh available. These resistant single plant lines were tested for the presence of specific resistance genes using a differential set of Bgh isolates. After analysis of obtained results, it was concluded that all tested 31 single plant lines of wild barley have genes for resistance that are not represented in the Pallas isolines differential s. Twenty-six lines of Hvs selected from accessions originated in Jordan and Libya showed resistance reaction to all isolates used. Identified new sources of effective resistance to BPM in single plant lines of Hvs will be further tested and used in barley pre-breeding programs. Keywords: Blumeria graminis; resistance genes; resistance; germplasm; gene bank;

Although a slightly radioactive element, thorium is considered very toxic because its various species, which reach the environment, can constitute an important problem for the health of the population. The present paper aims to expand the possibilities of using membrane processes in the removal, recovery and recycling of thorium from industrial residues reaching the municipal waste processing platforms. The paper includes a short introduction on the interest shown for this element, a weak radioactive metal, followed by highlighting of some common (domestic) uses. In a distinct but concise part, the bio-medical impact of thorium is presented. The classic technologies for obtaining thorium are concentrated in a single schema, and then the speciation of thorium is presented with an emphasis on the formation of hydroxo-complexes and complexes with common organic reagents. The determination of thorium has been highlighted both on the basis of its radioactivity, but especially through methods that call for extraction followed by an established electrochemical, spectral or chromatographic method. Membrane processes are presented based on the electrochemical potential difference, rapidly presenting barro-membrane processes, electrodialysis, liquid membranes and hybrid processes. A separate sub-chapter is devoted to proposals and recommendations for the use of membranes in order to achieve some progress in urban mining for the valorization of thorium.

Dialogue State Tracking is an essential component in multi-domain dialogue systems, aiming to accurately determine the current dialogue state based on the dialogue history. Existing research has addressed the issue of multiple mappings in dialogues by employing slot self-attention as a data-driven approach. However, learning the relationships between slots from a single sample has limitations and introduces noise. In this paper, we propose an External Slot Relation Memory-based Dialogue State Tracking model (ER-DST). By utilizing an external memory storage, we learn the relationships between slots as a dictionary of multi-domain slot relations. Additionally, we employ a small filter to discard slot information irrelevant to the current dialogue state. Experimental results on the MultiWOZ2.0 and MultiWOZ2.1 benchmarks demonstrate significant improvements while reducing the time complexity to O(n).

The disruptive application of ChatGPT (GPT-3.5, GPT-4) to a variety of domains has become a topic of much discussion in the scientific community and society at large. Large Language Models (LLMs), e.g., BERT, Bard, Generative Pre-trained Transformers (GPTs), LLaMA, etc., have the ability to take instructions, or prompts, from users and generate answers and solutions based on very large volumes of text-based training data. This paper assesses the impact and potential impact of ChatGPT on the field of digital forensics, specifically looking at its latest pre-trained LLM, GPT-4. A series of experiments are conducted to assess its capability across several digital forensic use cases including artefact understanding, evidence searching, code generation, anomaly detection, incident response, and education. Across these topics, its strengths and risks are outlined and a number of general conclusions are drawn. Overall this paper concludes that while there are some potential low-risk applications of ChatGPT within digital forensics, many are either unsuitable at present, since the evidence would need to be uploaded to the service, or they require sufficient knowledge of the topic being asked of the tool to identify incorrect assumptions, inaccuracies, and mistakes. However, to an appropriately knowledgeable user, it could act as a useful supporting tool in some circumstances.

Bone metastasis detection and quantification on bone scintigraphy is challenging and clinical important for treatment and patient’s life quality. To develop a CNN based diagnostic system for automated segmentation on bone metastasis regions is non-trivial, especially for a small dataset. A dataset in house comprising 100 breast cancer patients and 100 prostate cancer patients is utilized for this research. The Double U-Net model is adapted through the integration of background removal, adding negative samples, and transfer learning methods for bone metastasis detection. The performance is investigated via 10-fold cross-validation and computed in pixel-wise scale. The best model we achieved has precision of 63.08%, sensitivity of 70.82%, and F1-score of 66.72%. The developed system has the potential to provide pre-diagnostic reports for physicians in final decisions and the calculation of the bone scan index (BSI) with the combination with bone skeleton segmentation.

OpenAI has managed to turn 100 million heads in two months towards their new Language model tool (LM) ChatGPT. The third generation Generative Pretrained Transformer (GPT-3) has the capacity to tackle simple to complex and sophisticated problems, while providing reasoning behind its generated answers. ChatGPT can be used to increase productivity and improve efficiency and face challenging problems. Programming mobile applications is a challenging task that requires professional software engineers, skills and abilities to be developed. The following paper takes a case study approach to assess how novice app developers can use ChatGPT to generate Java scripts that will be used in Android studio to create a functional application. The results after, many iterations and ongoing conversations with ChatGPT managed to create an application for the anticipated function. Important insights have been drawn from the case study that could set the ground for any novice user seeking to create applications using Java scripting and Android Studio.