Sierra Madre Mountain Range (SMMR) is the backbone of Luzon Islands that contains high concentration of highly important ecological resources distributed among the 68 protected areas therewith. The present study aimed to assess the tree species composition and diversity in a secondary forest within the SMMR. A 2.25-km transect with 10 900-m2 was established to record tree species with a diameter at breast height of at least 10 cm. The findings revealed 148 individuals of trees from 38 morphospecies, 28 genera, and 20 families. Importance values unveiled the Aurora endemic Macaranga stonei Whitmore as the most important species in terms of the relative values of its abundance, frequency, and dominance. The area was also found to be home for 33 natives, 12 endemics, five IUCN threatened species, and nine Philippine threatened trees. Furthermore, the study site was also found to have a considerably high diversity with Shannon Weiner Index value of 3.269 and a relatively even distribution of individuals among species supported by the Simpson’s Evenness index value of 0.9453. Significant correlational relationships were also found among species richness, Shannon Weinder index, and Simpson’s Evenness index with correlation coefficients ranging from 0.881 to .934 all significant at p < .001. Lastly, the study was able to produce a distribution map necessary in implementing targeted conservation strategies. These findings provided valuable implications for future research and implementation of targeted and participatory biodiversity conservation and protection strategies.

Purpose: Cardiovascular disease (CVD) is a major risk factor for mortality in patients with osteoarthritis, and comorbidities increase postoperative complications after total knee arthroplasty (TKA). Arteriosclerosis plays a major role in hemodynamic dysfunction and CVD; however, arteriosclerosis has not been preoperatively evaluated before TKA using the cardio–ankle vascular index (CAVI). In this study, we evaluated the degree of preoperative arteriosclerosis using the CAVI in patients undergoing TKA, as well as its correlations with several preoperative patient factors. Methods: Arteriosclerosis was evaluated in 209 consecutive patients (251 knees) with osteoarthritis who underwent TKA at our institution between May 2011 and June 2022. The CAVI was measured in the supine position 1 day before TKA, and the correlations between the CAVI and several clinical factors were analyzed. A p value of <0.05 was considered statistically significant. Results: The CAVI was normal in 62 knees (25%), borderline in 71 knees (28%), and abnormal in 118 knees (47%). Univariate analysis revealed a moderate positive correlation between preoperative CAVI and age (r = 0.451, p < 0.001) and a weak negative correlation between preoperative CAVI and body weight (r = −0.306, p < 0.001) and body mass index (BMI) (r = −0.319, p < 0.001). Multivariate analysis showed that age (β = 0.349, p < 0.001) and BMI (β = −0.235, p < 0.001) were significantly correlated with preoperative CAVI. Conclusion: Arteriosclerosis should be carefully managed intraoperatively and postoperatively in patients with osteoarthritis undergoing TKA, particularly in older patients and patients with a low BMI.

Species diversity has been shown to be influenced by environmental factors, but the mechanism underlying their relationship remains unclear across spatial scales. Based on field investigation data collected from 3,077 sample plots in temperate forest ecosystems, we compared tree species richness, evenness and dominance at 10 km × 10 km, 30 km × 30 km and 90 km × 90 km spatial scales. Then, we detected the scale dependence of changes in tree species composition on climate, topography and forest structure using variation partitioning and quantified their contribution to tree diversity with gradient boosted models (GBMs) and fitted their relationships. The magnitude of tree richness, evenness and dominance significantly increased with spatial scale. Ecological factors jointly accounted for 24.3%, 26.5% and 38.5% of the variation in tree species composition at the three spatial scales, respectively. Annual mean temperature had a strong impact on tree richness, evenness and dominance and peaked at an intermediate scale. Tree evenness and dominance increased with the variation of temperature but had upper and lower limits. Tree richness obviously increased with annual precipitation on multiple scales and decreased with annual sunshine duration at large spatial scale. Tree richness, evenness and dominance obviously increased with the variation elevation and diameter at breast height at large scales and small scales, respectively. Tree dominance decreased with tree height in a hump at small scale. The dependence of tree diversity on ecological factors increased with spatial scales. Furthermore, different factors exert various controls on tree diversity at different spatial scales, representing a comprehensive mechanism regulating tree diversity.

Air pollution is responsible for any adverse effects on human beings. Thermal discomfort, on the other hand, is able to overload the human body and eventually provoke health implications due to the heat imbalance. Methods: The aim of the present work is to study the behavior of two bio-climatic indexes and statistical characteristics of the air quality index for Sofia city - the capital of Bulgaria for the period 2008 - 2014. The study is based on WRF-CMAQ model system simula-tions with a spatial resolution of 1 kilometer. The air quality is estimated by the air quality index, taking into account the influence of different pollutants and the thermal conditions by two indi-ces, respectively, for hot and cold weather. Results: It was found that half of the heat and cold index categories are present in the simulations. Their distribution has some spatial features. All air quality categories are present in the domain, with dominance only of the O3 and PM10. Conclu-sions: It was found that Sofia is not so hot and air polluted place, but in some situations, people have to have some concerns when intend to be outdoors for a prolonged time.

Abstract: The contribution of breakfast to diet quality (DQ) can inform future dietary guidelines. This study examined breakfasts that were associated with highest-quality diets. Dietary data came from the first reported day of the National Health and Examination Survey (NHANES) 2011-2014 (n=14,488). DQ measures were the Nutrient Rich Foods Index (NRF9.3) and the USDA Healthy Eating Index 2015 (HEI 2015). Analyses of breakfast intakes were conducted by NRF9.3 tertiles and by age and socioeconomic groups. Four out of 5 NHANES participants ate breakfast. Breakfast provided 19-22% of dietary energy depending on age. Breakfast intakes of complex carbohydrates and total sugars were higher and intakes of protein and fats were lower relative to energy intakes. Breakfast provided more that 20% of daily intakes of B vitamins, vitamins A and D, folate, calcium, iron, potassium and magnesium. Eating breakfast was associated with higher NRF9.3d scores. Breakfasts associated with top tertile of NRF9.3d had more carbohydrates and less added sugars and fats. Such breakfasts had more fruit and juices, more whole grains, more milk and yogurt and less meat and eggs. Breakfast patterns that favored fruit, whole grains, and dairy were associated with healthiest diets.

This investigation introduces an efficient method for assessing the reliability of semi-rigid steel frame connections in existing buildings, explicitly targeting the Top Angle and Seat Pad (TA-SP) semi-rigid connection commonly used in Australian cities' high-rise buildings. The moment capacity of these connections was examined through parameter power model testing, meticulously considering the bending, shear, and prying forces actions to determine the weakest elements in the connection system. A plastic hinge model was applied to ensure computational efficiency and accuracy in assessing the connections' ultimate strength. Comparatively, the finite element (F.E) method M−θ curves were introduced to scrutinise the nonlinear behaviour of the connection, providing validation for the predicted analytical approach. Further emphasis was placed on identifying the reliability of the weakest elements in the connection system, employing the First-Order and Second-Order Reliability Methods models to estimate their reliability index. The correlation between the model's failure probability and a percentile error was also explored, utilising Monte Carlo simulation reference for refined validation. Novel formulas and methodologies were introduced to compute the locked-chain-series system reliability, which accounts for the inherent material and geometric variability. The findings highlight the critical significance of the weakest element in determining the overall reliability of the existing TA-SP connection.

Abstract: Doppler renal resistive index (RRI) has been used for several decades as a potential indi-cator for renal disease and progression. In recent years, RRI has emerged as a useful prognostic indicator for a range of co-morbidities in patients who are acutely unwell and as a potential marker for sub-clinical acute kidney injury (AKI) and post procedural AKI risk. Despite this, the clinical and theoretical determinants of RRI are poorly understood and remain contentious. Method: A narrative review of studies exploring the theoretical, experimental, and clinical evidence for factors affecting RRI. No date restrictions were set. Findings: Both experimental and clinical data confirm that RRI is markedly affected by a range of systemic and renal determinants and is influenced closely by the underlying risk factors and sys-temic vascular changes that lead to progressive renal damage. Discussion: This paper provides an overview of the key haemodynamic determinants of renal re-sistive index and aims to clarify their relative importance. With reference to a simplified theoretical model, evidence from experimental and clinical studies is reviewed. Pathophysiological factors and patient characteristics that influence RRI are explored to provide a better understanding of why RRI values change in the presence of common or complex pathologies. Conclusion: By gaining a better understanding of the complex systemic and renal factors that influ-ence RRI, ultrasound users will be better prepared to understand and interpret changes in RRI across a range of patient presentations.

The aim of this study was to establish the blood glucose response to different cooking methods of pasta. Participants consumed three identical meals in a random order that were freshly cooked (hot), cooled and reheated. Blood glucose concentrations were assessed before, and every 15 minutes after ingestion of each meal for 120 minutes. There was a significant interaction between temperature and time (F_{(8.46-372.34)} = 2.75, p = 0.005), with the reheated (90 minutes) condition returning to baseline faster than both cold (120 minutes) and hot conditions. Blood glucose AUC was significantly lower in the reheated (703 ± 56 mmol L^-1 min^-1) compared with the hot condition (735 ± 77 mmol L^-1 min^-1, t(92) = -3.36, pbonferroni = 0.003), with no significant difference with the cold condition (722 ± 62 mmol L^-1 min^-1). To our knowledge, the current study is the first to show that reheating pasta causes changes in post-prandial glucose response, with a quicker return to fasting levels in both the reheated and cooled conditions compared with the hot condition. The mechanisms behind the changes in post-prandial blood glucose seen in this study are most likely related to changes in starch structure and how these changes influence glycaemic response.

The application of graph theory in chemical and molecular structure research far exceeds people's expectations, and it has recently grown exponentially. In the molecular graph, atoms are represented by vertices and bonded by edges. In this report, we study the silicon-carbon Si₂C₃-I[p,q] and Si₂C₃-II[p,q]. We compute several Zagreb polynomials and Redefined Zagreb indices of these silicon-carbons.

Inflammation is known to be risk factors for metabolic diseases. The purpose of this study was to develop a Food-based Index of Dietary Inflammatory Potential (FBDI) and conduct its validation assessment. This study analyzed raw data from Korean Genome and Epidemiology Study 2012–2014 data of 17,771 people. We carried out the correlation analysis between 51 food groups and hs-CRP. The FBDI was developed by multiple regression method with hs-CRP and selected 17 food group. For the validation of FBDI, 7795 people in the 6th Korea National Health and Nutrition Examination Survey (KNHAES) was used. Binary logistic regression analysis was used for risk analysis of metabolic syndrome and FBDI. The FBDI model included that 7 were composed of anti-inflammatory food groups and 3 of inflammatory food groups. The FBDI was calculated by multiplying the intake of food group by β coefficients. KNHAES were included in the validation of FBDI. The risk of metabolic syndrome was found to be 2.152 times higher in the group with the highest FBDI than in the group with the lowest one (95% Cl:1.458–3.178, p for trend = 0.000). This study developed FBDI reflecting food intake for Koreans, which showed a significant relationship with the risk of metabolic syndrome.

This study aimed to assess the presence of metal contamination in the sediments of the Narmada River by considering seasonal variations. In this context, samples were gathered from six stations along the river in 2021–22. To assess the various metals including Li, Na, Mg, Al, Ca, Fe, Cu, Zn, Co, and Ni by utilizing ICP-MS. Sediment contamination was assessed by utilizing indices like contamination factor (CF), pollution load index (PLI), geo-accumulation factor (Igeo), and enrichment factor (EF). The observed order of metals concentration revealed that metals Fe>Al>Mg>Ca>Na>Cu>Zn>Co>Ni>Li. The seasonal variation reveals metals Al, Fe, Cu, Zn, and Ni exhibit the highest concentrations during the monsoon and metals Li and Co, the highest concentration in the post-monsoon, while metals Na, Mg, and Ca, exhibit their peak concentration during the pre-monsoon. The findings from CF, PLI, Igeo, and EF indicate that there were low to moderate contaminations, metal pollution exists, uncontaminated to moderate contaminations, and minor enrichment. The cluster analysis revealed the source of contamination was anthropogenic, marine, and fertilizer activities. Additionally, Correlation matrix was employed to establish connections between metals. The findings of this research are to understand the metal contamination and potential carcinogenicity in the sediment of Narmada River.

Maize (Zea mays subsp. mays) is the staple food crop in the world. In this study, multi-layer perceptron (MLP), support vector machine (SVM), genetic algorithm-based multi-layer perceptron (MLP-GA), and genetic algorithm-based support vector machine (SVM-GA) hybrid artificial intelligence algorithms were used for the prediction of drought tolerance and stress tolerance indices in teosinte maize lines. Correspondingly, the gamma test technique was applied to determine efficient input and output vectors. The potential of developed models was evaluated based on statistical indices and graphical representation. Results of gamma test based on the least value of gamma and standard error indices show that day of anthesis (DOA), day of silking (DOS), yield index (YI), and gross yield per plant (GYP) information vector arrangements were determined as efficient information vector combination for drought-tolerant index (DTI) as well as the stress-tolerant index (STI). The results of MLP, SVM, MLP-GA, and SVM-GA algorithms were compared based on statistical indices and visual interpretation that have satisfactory for prediction of the drought-tolerant index and stress-tolerant index in maize crop. It has also seemed that genetic algorithm-based hybrid models (MLP-GA and SVM-GA) were found a better prediction of the drought-tolerant index and stress-tolerant index in maize crop. Similarly, the SVM-GA model has the highest potential to forecast the DTI and STI in maize crops as compared to MLP, SVM, MLP-GA models.

The Urban Eco-Sustainable Index for Upscaling Water Security at Catchment Level in Langat River, Malaysia has developed by using the Modified Watershed Sustainability Index or MicroWSI (MWSI), which was based on the Participation, Design and Management Components. The study has successfully applied spatial and social dimensions on ecohydrology of the selected Langat River reach for stormwater management, natural ecosystems health and quality of life. The planning and public participation aspects of the study have evaluated the surrounding neighborhood area of Langat. The conceptual design of rehabilitation works implementation related to Urban Stormwater Management Manual for Malaysia (MSMA) Stormwater Management Ecohydrology (SME) within the study area has been developed with four components of MSMA-SME to be implemented in the study area i.e Bioretention System, Porous Pavement System, Constructed Wetland and Slope Protection Works. These components were proposed to be applied in the development of Langat Riverfront Community Park (LRCP) which has taken into account the components of Design, Management and Participation of Community and Stakeholders in Langat River Basin, Malaysia. This study analyzed the MWSI for the Upscaling of MSMA Ecohydrology at Catchment Level of Langat River and has found the medium level of sustainability for the level of participation, proposed design, and management. Thus, there is a need to increase the level of readiness in the community and stakeholder participation in the Langat River towards sustainability of river conservation and rehabilitation programmes in this basin.

This paper presents a theoretical evaluation of the prices of mixed briquettes produced from co-conut shells (CCS), banana peels (BNP), rattan waste (RWT), and sugarcane bagasse (SGC), and, on the other hand, an analysis of the economic viability of their use as a replacement for conventional household fuels (Liquefied Petroleum Gas, fuelwood, and wood charcoal) in house-holds in Cameroon. The investigation was carried out using the Life Cycle Cost method on a typical household over a ten-year period with annual cooking energy requirements of 950 kWhth. The SGC-CCS and SGC-RWT mixed briquettes with a ratio higher than 7.75% and 11.1%, respectively, have prices lower than 0.063 €/kWhth. The Present Value of the Net Benefit is posi-tive for the use of SGC-CCS and SGC-RWT mixed briquettes. The results show that by making the right mixes of residues, it is possible to obtain biomass briquettes that are less expensive than conventional fuels.

Nowadays, there are implemented devices whose purpose is to perform massive computations by saving resources at the time they reduce the latency of arithmetic operations. These devices are usually GPUs, FPGAs and other specialised devices such as "Coral". Neural networks, digital filters and numerical simulators take advantage of the massively parallel operations of such devices. One way to reduce the amount of resources used is to limit the size of the registers that store data. This has led to the proliferation of numeric formats with a length of less than 32 bits, known as short floating point or SFP. We have developed several SFP’s for use in our neural network accelerator design, allowing for different levels of accuracy. We use a 16-bit format for data transfer and different formats can be used simultaneously for internal operations. The internal operations can be performed in 16-bit, 20-bit and 24-bit. The use of registers larger than 16-bit allows the preservation of fractional information while increasing precision. By leveraging some of the FPGA’s arithmetic resources, our design outperforms designs implemented from scratch and is competitive with specialized arithmetic circuits already implemented in the FPGA.

Being able to complete the production of the product project on time is the prerequisite to win more tasks, many enterprises have begun to study intelligent scheduling algorithms to achieve dynamic control of the total project duration. However, the production operation time of products is highly volatile, and it is impossible to predict the possible operation time of future products. In the actual production environment, we often encounter extreme situations such as mixed production lines, multiple varieties, variable batches, etc. A dynamic optimization CPM model in the ERP/MES system with the attention mechanism (EMA-DCPM) will collect, extract and predict the operation time through artificial intelligence technology, and it can accurately predict the exact operation time of a batch of products that have not yet been produced. Through experiments, our algorithm can realize the production scheduling and get more than 200% better precision than former algorithms and realize dynamic optimization of complex projects.

In order to understand the impact of lithologic heterogeneity of continental mixed fine-grained sedimentary rocks on reservoir brittleness in western Qaidam basin, the mechanical properties of the rocks and their correlation with mineral composition and petrographic characteristics were studied by measns of mineralogy, petrography and triaxial stress test. The results show that the reservoir rocks can be divided into 5 different types according to the mechanical properties of the reservoir (characteristics of stress-strain curves), among them Type I and III belong to similar elastoplastic failure model, type II shows a special pulse failure mode for plastic material, type IV shows a failure mode of mixed characteristics, and type V exhibits a typical plastic failure model. The correlation between minerals and mechanical properties indicates that quartz and feldspar, which are often considered brittle minerals, do not contribute much to the brittleness of continental fine-grained sedimentary rocks. The main minerals affecting reservoir brittleness are dolomite and clay minerals, and their contributions to reservoir brittleness are positive and negative, respectively. The petrographic analysis results prove that the abnormal correlation between rock mechanical properties and quartz and feldspar is caused by the different rock fabrics. When dolomite forms a rock skeleton, it typically exhibits greater strength, brittleness and physical properties than other minerals. Based on the results, a brittleness evaluation standard for continental fine-grained sedimentary rock reservoir is proposed, and the validity of the standard is verified by the spatial correlation between the lithology probability model and the micro-seismic monitoring data, indicating that the spatial heterogeneity of dolomite-rich rock is the main controlling factor for the development of ‘sweet spot’ in the Cenozoic continental fine-grained sedimentary rock reservoir in the Western Qaidam Basin.

Research rarely explores LGBTQ+ youth bullying in the context of culture-specific outcomes (e.g., LGBTQ+ identity development) and what can mitigate the impact of peer stressors. This study used a concurrent mixed methods design to explore how experiences of peer victimization predicted LGBTQ+ youth’s identity development (i.e., stigma sensitivity, concealment motivation, and difficult process) and whether social support and outness served as protective, moderating factors. The mixed-methods approach provides a culture-specific context via qualitative inquiry to inform whether the quantitative findings align with how youth qualitatively discuss their experience of bullying, negative outcomes, and social support. Our sample consisted of 349 LGBTQ+ youth 14-17 years old who completed a survey (quantitative sample), and a subset of 39 LGBTQ+ youth who completed a semi-structured interview (qualitative sample). Our quantitative findings indicated that greater overall peer victimization was positively related to LGBIS-revised subscales of stigma sensitivity, concealment motivation, and difficult process, where both outness and social support moderated such relations. Qualitatively, victimized youth also reported stigma sensitivity and concealment motivation, while also endorsing how being out and having a support system played a role in their experience of being victimized. These qualitative findings align with our quantitative findings that classmate support mitigated the effects of peer victimization on difficulty of coming out. Implications for practitioners and researchers are provided.

The copper end paste used in multilayer ceramic capacitors sintered in nitrogen atmosphere will lead to carbon residue of organic vehicle, which will lead to the reduction of electrode conduc-tivity and high scrap rate. With an attempt to leave no residue in the sintering, the compatibility of solvents and thickeners should be improved because it has an important influence on the hi-erarchical volatilization and carbon residue of organic vehicles. In this work, the volatility of different solvents was compared and several solvents were mixed in a definite proportion to prepare an organic vehicle with polyacrylate resins. The hierarchical volatility and solubility parameters of mixed solvents were adjusted effectively by changing proportions of different components, the thermogravimetric curves of resins and organic vehicles were measured by thermogravimetric analyzer, the effect of solubility parameter on the dissolvability of resins in the solvent and the residual of organic vehicles were studied. Results showed that the hierar-chical volatilization of solvents can be obtained by mixing different solvents; the intrinsic vis-cosity of the organic vehicle is higher and the thermal decomposition residue of polyacrylate resins is lower when the solubility parameters of mixed solvents and polyacrylate resins are closer. The low residual sintering of organic vehicles can be achieved by using the mixed solvent with hierarchical volatility and approximate solubility parameters as resins.

Any photon, regardless of its origin, carries the same optical field profile. This feature and the quantum Rayleigh emissions generate temporally discrete groups of several photons in a resonant cavity incorporating one single quantum dot. A periodic stream of single photons is distorted by high-finesse optical cavities and the quantum Rayleigh spontaneous emission in a beam splitter. Groups of photons emerge from interferometric filters because of multiple internal reflections.

A novel geometric interpretation of the Minkowski metric is provided, which offers a different and more intuitive approach to phenomena in special relativity. First it is shown that a change of basis in Minkowski space is the equivalent of a change of basis in Euclidean space if a basis element is replaced by its dual element, constituting a mixed basis set. The methodology of the proof includes infinitesimal changes of basis using the Lie-algebras of the involved groups. As a consequence, a direct mapping between Euclidean and Minkowski space is defined. Second, a measuring device called a local, flat observer is defined in Euclidean space and it is shown, that this device uses a mixed basis when measuring distances. Combining these steps, it is concluded that a local, flat observer in a four-dimensional Euclidean spacetime measures a Minkowski spacetime.

In this contribution, a method based on a solid solution theory of clathrate hydrate for multiple cage occupancy, host lattice relaxation and guest-guest interactions has been presented to estimate hydrate formation conditions of binary and ternary gas mixtures. We have performed molecular modeling of structure, guest distribution, and hydrate formation conditions for the CO₂ + CH₄, and CO₂ + CH₄ + N₂ gas hydrates. In all considered systems with and without N₂, at high and medium content of CO₂ in the gas phase we have found that CO₂ is more favorable to occupy clathrate hydrate cavities than CH₄ or N₂. Addition of N₂ to the gas phase increases ratio concentration CO₂ in compressing with concentration CH₄ in clathrate hydrates and makes gas replacement more effective. The mole fractions of CO₂ in CO₂ + CH₄ + N₂ gas hydrate rapidly increases with the growth of its content in the gas phase. And the formation pressure of CO₂ + CH₄ + N₂ gas hydrate rises in comparison with the formation pressure of CO₂ + CH₄ gas hydrate. Obtained results agree with the known experimental data for simple CH₄, CO₂ gas hydrates and mixed CO₂ + CH₄ gas hydrate.

As part of the ongoing screening research for local edible plants in Thailand, Petroselinum crispum fruit oil was considered as a potential bioinsecticide with proven antimosquito activity against both the pyrethroid susceptible and resistant strains of Aedes aegypti. Due to the comparative mosquitocidal efficacy on these mosquitoes, this plant oil is promoted as a natural alternative and attractive candidate for further study in monitoring resistance of mosquito vectors. Therefore, the aim of this study was to evaluate the impact of P. crispum oil on the biochemical characteristics of the target mosquito larvae of Ae. aegypti, by determining quantitative changes of key enzymes responsible for xenobiotic detoxification, including glutathione-S-transferases (GSTs), α- and β-esterases (α-/β-ESTs), acetylcholinesterase (AChE), acid and alkaline phosphatases (ACP and ALP) and mixed-function oxidases (MFO). Three populations of Ae. aegypti, comprising the pyrethroid susceptible Muang Chiang Mai-susceptible (MCM-S) strain and the pyrethroid resistant Pang Mai Dang-resistant (PMD-R) and Upakut-resistant (UPK-R) strains, were used as test organisms. Biochemical study of Ae. aegypti larvae prior to treatment with P. crispum oil revealed that apart from AChE, the baseline activity of most defensive enzymes, such as GSTs, α-/β-ESTs, ACP, ALP and MFO, in resistant UPK-R or PMD-R, was higher than that determined in susceptible MCM-S. However, after 24-h exposure to P. crispum oil, the pyrethroid susceptible and resistant Ae. aegypti showed similarity in biochemical features, with alterations of enzyme activity in the treated larvae, as compared to the controls. A significant increase in the activity levels of GSTs, α-/β-ESTs, ACP and ALP was recorded in all strains of P. crispum oil-treated Ae. aegypti larvae, whereas MFO and AChE activity in these mosquitoes was decreased. The recognizable larvicidal capability on pyrethroid resistant Ae. aegypti, and the inhibitory effect on AChE and MFO, emphasized the potential of P. crispum oil as an attractive alternative application for management of mosquito resistance in current and future control programs.

The aim of this work is to present a design approach of a Shock-Induced Combustion Ramjet (Shcramjet) inlet, and present its optimization in terms of the flow and geometrical parameters. The flow properties of mixed compression type inlet of a Shcramjet are examined using analytical and numerical techniques. The geometries obtained with variations in the wedge angles, length, height and cowl lip positions are used to study the flow characteristics of inlet, identifying bow shock temperature ratio as the optimization parameter. The two-dimensional geometries of two-shock and three-shock inlet models designed analytically for shock-on-lip condition at Mach 12.5 and an altitude of 32.5 km are numerically simulated in OpenFOAM CFD Toolbox. A density based compressible CFD solver based on central upwind schemes of Kurganov and Tadmore is used to solve 2D inviscid Euler equations. The inlet total pressure recovery is expressed as a function of temperature ratios of compression shocks, and is found to have a maxima at a bow shock temperature ratio at the design condition when the bow and external shocks have equal strengths. The effect of considering the flow to be calorically imperfect is studied numerically, and the deviation from the analytical design is presented.

In 2020, following the World Health Organization's declaration of COVID-19 as a pandemic, dental practices faced unprecedented disruptions globally. This retrospective cross-sectional study, conducted at a leading university dental hospital in the Lisbon Metropolitan Area, investigated the impact of these disruptions on dental caries. The study, spanning June 2019 to June 2021, included a full-mouth X-ray examination, along with sociodemographic, behavioral, and medical data. Our sample comprised 3,380 participants (2,007 females and 1,373 males), aged 18 to 99 years, divided into pre-lockdown and post-lockdown groups. We employed the Decayed, Missing, and Filled Teeth (DMFT) index to measure dental caries. Our findings revealed that nearly 90% of participants in both groups experienced dental caries, indicating a statistically significant difference between the pre-lockdown and post-lockdown periods. However, the impact of COVID-19 confinement varied among different demographic sectors, with age, educational background, and professional status emerging as the key determinants. This study highlights the need for a more nuanced understanding of the impact of the pandemic on oral health, emphasizing the role of sociodemographic factors in shaping dental health outcomes during such global health crises.

This article focuses on the issue of urban development of cities and their residential development from the perspective of spatial planning. Spatial planning fundamentally determines, what kind of construction is feasible in cities. However, spatial plans often do not consider spatial limits, which often go against the proposed ways of using of the given sites, or make their use fundamentally difficult, for example by disproportionately increasing of the costs of residential construction, when it is necessary to remediate old burdens in the defined locality. The subject of the presented research was to examine the possibility of establishing an Index of Residential Development (IoRD), which evaluates the possibilities of residential development in the territory of urban agglomerations. The aim of the research, in the form of establishing of an Index of Residential Development (IoRD), was to assess, how it is possible to consider spatial limits associated with residential construction in urban intravilanes in order to identify the objectives of further spatial development planned by cities. Subsequently, the partial aim of the research was also to create a usable tool for support in the decision making of development organizations on the location of their project in a given space. Based on the results of the research, it was deduced that the limits associated with the residential development in intravilanes based on the IoRD could be considered. Clear links were also shown between the limits in the territory and the impaired possibility of construction in cities with zoning plans, which did not respond to the limits in the territory by adding other design zones, or completely ignored them. Although the methodology for determining of the Index of Residential Development (IoRD) was verified due to the availability of data in the case study carried out in the Czech Republic – the city of Brno, the methodology is applicable to any urban agglomeration even outside the Czech Republic when fulfilling the conditions defined in the article.

Sleep-disordered breathing affects the growth and development, mental aspect, and learning ability of affected children. Postoperative scarring causes anteroposterior and vertical develop-mental disorders of the maxilla. Obstructive apnea is likely to occur due to the influence on the maxillofacial and airway morphology. In this study, we investigated the sleep-respiratory dynamics of school-aged children with unilateral cleft lip and palate by performing a simple over-night sleep study, maxillofacial morphology and airway analysis using lateral cranial radiographs, and model analysis. Children with unilateral cleft lip and palate showed a significantly higher respiratory event index (REI) than normal children; the maxilla was located in the posterior position in terms of maxillofacial morphology, and airway morphology showed narrow values for all distance measurement items. Moreover, the width and length of the dental arch and the width of the alveolar base arch were significantly smaller. Furthermore, there was a negative correlation between REI and SNA, ANB, REI, and alveolar base arch width. Children with unilateral cleft lip and palate are more likely than normal children to develop sleep-disordered breathing due to in-creased airway resistance caused by undergrowth of the maxilla and narrowing of the upper airway and oral volume.

Forest damage has become more frequent in Europe in the last decades, and remote sensing offers a powerful tool for monitoring them rapidly and cost-effectively. A novel approach was developed to utilize high-resolution ESA Sentinel-2 satellite imagery and Google Earth Engine cloud computing. The processing, analysing, and visualization of vegetation and water index (NDVI, NDVIch, Z NDVI, EVI, NDWI) maps and charts derived from satellite images took place in the cloud to ensure the detection of forest disturbances in the Hungarian study site for the period 2017-2020. The index maps were classified to reveal forest disturbances, and the cloud-based method successfully showed drought and frost damage in the oak-dominated Nagyerdő forest of Debrecen. Differences in the reaction to damage between tree species were visible in the index values, therefore a Random Forest Machine Learning classifier was applied to show the spatial distribution of dominant species. Accuracy assessment was accomplished with confusion matrices that compared classified index maps to field-surveyed data, demonstrating 71% Total Accuracy for forest damage and 76% for tree species. Based on the results of this study and the resilience of Google Earth Engine, the presented method has the potential to be extended to monitor the entire Hungary.

With this article, impact of effluent mixed water with the quality of the Mansagar Lake has been established by evaluating the physico-chemical parameters and the heavy-metal contents experimentally. The process of calculating water quality and the metal pollution quality indices is also explained in brief with respect to selected sample locations and varied environmental conditions (Pre- and Post-Monsoon season). Distribution trends of Pearson‘s correlation factor have also been discussed to establish their relation among the physico-chemical parameters and the heavy-metal contents for varied environmental conditions. In the end, detailed discussion on observations made during this study and useful recommendations are also elaborated in details. With this article, we intend to present a document for better understanding of the water quality of this lake in view of futuristic management strategies to be adopted to maintain it heritage values.

With the development of general anesthesia techniques and anesthetic substances, brought new horizons for the expansion and improvement of surgical techniques. Nevertheless, more complex surgical procedures brought a higher complexity and longer duration for general anesthesia that led to a series of adverse events such as hemodynamic instability, under- or overdosage of anesthetic drugs, as well as an increased number of post-anesthetic events. In order to adapt the anesthesia according to the particularities of each patient, the multimodal monitoring of these patients is highly recommended. Classically, general anesthesia monitoring consists of the analysis of vital functions and gas exchange. Multimodal monitoring refers to the concomitant monitoring of the degree of hypnosis and the nociceptive-antinociceptive balance. By titrating anesthetic drugs according to these parameters, clinical benefits can be obtained, such as hemodynamic stabilization, reduction of awakening times, and the reduction of post-operative complications. Another important aspect is the impact on the status of inflammation and the redox balance. By minimizing inflammatory and oxidative impact one can achieve a faster recovery that will lead to both increased patient satisfaction and an increase in patient safety. The purpose of this literature review is to present the most modern multimodal monitoring techniques, respectively to discuss the particularities of each technique.

This paper studies the contemporaneous relationship between S&P 500 index returns and log-increments of the market volatility index (VIX) via a nonparametric copula method. Specifically, we propose a conditional dependence index to investigate how the dependence between the two series varies across different segments of the market return distribution. We find that: (a) the two series exhibit strong, negative, extreme tail dependence; (b) the negative dependence is stronger in extreme bearish markets than in extreme bullish markets; (c) the dependence gradually weakens as the market return moves toward the center of its distribution, or in quiet markets. The unique dependence structure supports the VIX as a barometer of markets' mood in general. Moreover, applying the proposed method to the S&P 500 returns and the implied variance (VIX²), we find that the nonparametric leverage effect is much stronger than the nonparametric volatility feedback effect, although, in general, both effects are weaker than the dependence relation between the market returns and the log-increments of the VIX.

We have studied the very large amount of literary works written by the Italian mystic Maria Valtorta to assess similarities and differences in her writings because she claims that most of them are due to mystical visions. We have used mathematical and statistical tools developed for specifically studying deep linguistic aspects of texts. The general trend indicates that the literary works explicitly attributable to Maria Valtorta differ significantly from her other literary works, that she claims are attributable to the alleged characters Jesus and Mary. Mathematically, they seem to have been written by different authors. The comparison with the Italian literature is very striking. A single author, namely Maria Valtorta, seems to be able to write texts so diverse to cover the entire mathematical range (suitable defined) of the Italian literature of seven centuries.

Malocclusions have a continuously increasing prevalence from a generation to another as a result of climate changes, soil, atmosphere and water pollution. All of these aspects have unfavorable consequences on the nutritional scheme. Thus, nutrition together with other etiopathogenic factors contribute to complex alterations in the somatic development of the entire organism and, implicitly, of the cephalic extremity. The study group included 4147 children from randomly selected schools from Vâlcea County, Romania. The aim of this study is to determine the prevalence of malocclusions in schoolchildren from Vâlcea County, Romania, according to the three main classes of malocclusions (according to Angle’s classification), age groups (from 6 to 10 years old and from 11 to 14 years old), gender (male and female) and place of origin (rural and urban). For Angle class I malocclusions we recorded the highest prevalence (48,78% from the total number of schoolchildren with malocclusions), followed by Angle class II malocclusions (45,85% from the total number of schoolchildren with malocclusions) and for Angle class III malocclusions we found the lowest prevalence (5,37% from the total number of schoolchildren with malocclusions).According to gender, we found the highest prevalence in female gender (29,90% from the total number of female subjects), while in male gender we recorded a prevalence of 27,70% from the total number of male subjects. Regarding the place of origin, there is a higher prevalence of malocclusions in the urban areas (29,16%). The study subgroup included 140 children randomly selected from the total number of subjects from the study group. They were included in a more advanced study. The aim is to find potential associations between the presence of malocclusions and various oral variables. Categorical variables were expressed as numerical values and percentages, and their association was evaluated with either the Chi-square test of association or homogeneity, or the Fisher Exact test. The acquired data were incorporated into a binomial logistic regression model to assess the likelihood of developing malocclusions in relation to the following variables: defective phonation, bruxism, frequency of teeth brushing, onychophagia, oral respiration, infantile deglutition, placing objects between the maxillaries, thumb sucking and salivary aspects. It is also aimed to compare the results obtained with similar ones from the specialized literature.

The present study describes the preparation of a composite material consisting of thermoplastic polyurethane-poly (n-isopropylacrylamide) (TPU-PNIPAM), which was employed for the se-lective adsorption separation of alcohol/water mixed solutions for the first time. The findings revealed that TPU and PNIPAM were interconnected through interchain hydrogen bonding, resulting in exposed hydrophobic isopropyl groups while covering the hydrophilic hydrogen bond sites. Selective separation of alcohols from alcohol/water mixed solutions occurred via London dispersion forces between alkyl groups. Increasing the PNIPAM load on the TPU surface led to a decrease in available hydrogen bond sites capable of bonding with water molecules, an increase in dispersible isopropyl groups interacting with alcohol alkyl groups, and enhanced selective adsorption capacity of TPU-PNIPAM towards alcohol/water mixed solutions. Moreover, TPU-PNIPAM exhibited a characteristic fast-slow-fast-equilibrium ad-sorption curve for different initial concentrations of alcohol/water mixtures, and its selective adsorption capacity increased when temperature reached 55℃. In addition to these general trends, under identical conditions, the selective adsorption capacity of TPU-PNIPAM gradually increased by methanol < ethanol < isopropyl alcohol < propyl alcohol, thus indicating a positive correlation between selectivity performance and hydrophobicity level.

The African continent has the highest prevalence of hypertension globally, with South Africa reporting the highest prevalence in Southern Africa. While the influence of genetic variability in the pathogenesis of hypertension is well described internationally, limited reports are available for African populations. This study aimed to assess the association of genetic variants and essential hypertension in a cohort of two ethnic South African population groups. Two hundred and seventy-seven hypertensive and one hundred and seventy-six normotensive individuals were genotyped for 79 variants. Genotyping was performed using the Illumina GoldenGate Assay and allele-specific polymerase chain reaction. The association of variants was assessed using the Fisher Exact test under the additive and allelic genetic models, while multivariate logistic regression was used to predict the development of hypertension. Five variants (CYP11B2 rs179998, AGT rs5051 and rs699, AGTR1 rs5186 and ACE rs4646994) were significantly associated with essential hypertension in the cohort under study. Furthermore, AGTR1 rs5186 and AGT rs699 were identified as risk factors for the development of hypertension in both ethnic groups. In two ethnic South African populations an association was observed between Renin-Angiotensin-Aldosterone System (RAAS) related genes and the development of hypertension.

Objective: The aim of this study was to optimize the fermentation process of Radix Ranunculi ternate via microbial fermentation and analyze the changes in the contents of the main components, the antioxidant and hypoglycemic capacities of the extract before and after fermentation. Methods: The solid-state fermentation process was optimized using single-factor tests and the response surface method, with the yield of the alcohol extract of R. ternate as an evaluation index. Results: The best fermentation process was optimized using solid-state endophytic fungus fermentation technology as follows: strain addition ratio of Chaetomium globosum/Fusarium equiseti =1:1, fermentation for 5 d, sieve size of 40 mesh, liquid/material ratio of 0.8:1 mL·g−1, fermentation temperature of 31 °C, and inoculation amount of 7.5%. Under the optimized conditions, the contents of the water-soluble extract and total polysaccharides decreased by 12.71% and 12.95%, respectively, in the fermentation, The contents of ethanol-soluble-extract, flavonoids, saponins, polyphenols, organic acids, and total amino acids of fermented R. ternate increased by 19.77%, 57.14%, 79.67%, 14.29%, 17.63% and 3.82%, respectively, and the scavenging rate for DPPH, ABTS+, ·OH free radicals and inhibitory rate for α-amylase also increased by 19.02%, 14.17%, 7.53% and 34.54%, respectively, compared with unfermented R. ternate. Conclusions: Solid-state fermentation opens new avenues for the development and application of R. ternate as natural antioxidant and hypoglycemic food.

This study examined the efficiency of a combined diagnostic approach in which bioamplification of Arizona 861 S1 citron was integrated with RT‒PCR to detect Citrus tristeza virus (CTV) and Hop Stunt Viroid (HSVd) in Citrus plants. The capacity of the combined method to diagnose mixed infections of CTV and HSVd, along with early single infections of both pathogens, was assessed by evaluating the incubation periods and differential detection capabilities between the combined and direct methods. The bioamplification method exhibited high sensitivity (100%) and specificity (100%) for CTV, enabling early detection even in patients with low-titer infections compared to direct RT‒PCR. However, for HSVd, the combined method achieved 50% sensitivity in early infections, highlighting the need for additional replicates to enhance diagnostic reliability. The relative concentrations of pathogens in mixed and simple infections were evaluated; the analysis revealed no significant differences, suggesting minimal interference between CTV and HSVd. This approach allows early detection of CTV but requires further refinement for HSVd diagnosis. These findings underscore the complementary roles of the cost-effectiveness of direct RT‒PCR and the sensitivity of the combined method in implementing effective disease control strategies in citrus crops.

Dementia education and training for workforce development is becoming increasingly important in bridging knowledge gaps among health and social care practitioners in the UK and internationally. Dementia Education for Workforce Excellence (DEWE) was developed during the COVID-19 pandemic blending both synchronous and asynchronous instruction and delivered across three different contexts: care homes, home care, and nurse education within the UK and India. This study aimed to evaluate DEWE using mixed methods with online survey data analyzed descriptively and interview data analyzed thematically. Integration of survey and interview data aimed toward a comprehensive evaluation of this novel approach for dementia workforce development. Thirty-four social care practitioners and nurse educators completed the online survey demonstrating high-level learner satisfaction; learning gains; behavioral change, and motivation to share new knowledge. Four key themes developed from the analysis of interviews (n=9) around participants’ pursuit of new knowledge; delivery modes in DEWE; learning gains and impact of DEWE; and adaptations for future program implementation. Findings suggest DEWE is an innovative resource that promotes person- and relationship-centered dementia care across all stages of one’s dementia journey. Cultural adaptations are recommended for international delivery to ensure contextual alignment and maximum impact.

Little is known about how the degree of mixing of forest-forming species affects forest floor hydrology. We evaluated the water storage capacity of the resulting litter layer by mixing litterfall of Scots pine and sessile oak and studying their decomposition time. We prepared 90 artificial samples containing pure pine litter, pure oak litter, and mixed pine-oak litter with varying shares of pine needles. These samples were subjected to 15 months of decomposition in soil. After every three months of decay, some samples were removed from the soil, and their water storage capacity, bulk density, and C:N ratio were evaluated. Our findings indicate that samples with the greatest water storage capacity had a low C:N ratio and a predominant share of oak leaves. Conversely, samples with a high C:N ratio and a predominant share of pine needles had the lowest water storage capacity. After 12 and 15 months of decomposition, the water storage capacity increased by more than 52% compared to the initial water capacity of the samples. The highest increase in water storage capacity (>40%) was observed in samples with a predominant share of oak leaves, while the lowest (approximately 28%) was recorded in samples with 80 and 100% of pine needles.

This study investigates effective strategies for second language education in primary schools, analyzing the efficacy of immersive and interactive methods, digital literacy tools, and mixed-method approaches. The findings reveal significant improvements in language proficiency and student engagement through these methodologies, with immersive and interactive strategies showing substantial benefits in oral proficiency and engagement, digital tools enhancing accessibility and engagement, and mixed-method approaches yielding the highest overall effectiveness. The study underscores the importance of a balanced, flexible approach to language education, integrating traditional and modern methods to cater to diverse learner needs. These strategies not only advance linguistic skills but also contribute to the broader cognitive and emotional development of young learners, emphasizing the critical role of effective language education in preparing students for a globalized world.

In this work, a modeling technique utilizing the P-Graph framework was used for a case 1 study involving biomass-based local energy production. In recent years, distributed energy systems 2 gained attention. These systems aim at satisfying energy supply demands, supporting the local 3 economy, decreasing transportation needs and dependence on imports, and in general obtaining a 4 more sustainable energy production process. Designing such systems is a challenge, for which novel 5 optimization approaches were developed to help decision-making. Previous work used the P-Graph 6 framework to optimize energy production in a small rural area, involving manure, intercrops, grass, 7 and corn silage as inputs, and fermenters. Biogas is produced in fermenters, and Combined Heat 8 and Power (CHP) plants provide heat and electricity. A more recent result introduced the concept of 9 operations with flexible inputs in the P-Graph framework. In this work, the concept of flexible inputs 10 was applied to model fermenters in the original case study. A new implementation of the original 11 decision problem was made both as a Mixed-Integer Linear Programming (MILP) model and as a 12 purely P-Graph model by using the flexible input technique. Both approaches provided the same 13 optimal solution, with a 31% larger profit than originally reported.

This paper presents a new low-voltage versatile mixed-mode filter which uses a multi-ple-input/output differential difference transconductance amplifier (MIMO-DDTA). The multi-ple-input of the DDTA is realized using a multiple-input bulk-driven MOS transistor (MI-BD-MOST) technique to maintain a single differential pair, thereby achieving simple structure with minimal power consumption. In a single topology, the proposed filter can provide five standard filtering functions (low-pass, high-pass, band-pass, band-stop, and all-pass) in four modes: voltage (VM), current (CM), transadmittance (TAM), and transimpedance (TIM). This provides the full capability of a mixed mode filter (i.e., twenty filter functions). Moreover, the VM filter offers high-input and low-output impedances and the CM filter offers high-output impedance; therefore, no buffer circuit is needed. The natural frequency of all filtering functions can be electronically controlled by a setting current. The voltage supply is 0.5 V and for a 4 nA setting current, the power consumption of the filter was 281 nW. The filter is suitable for low-frequency biomedical and sensor applications that require extremely low supply voltages and nano-watt power consumption. For the VM low-pass filter, the dynamic range was 58.23 dB @ 1 % total harmonic distortion. The proposed filter was designed and simulated in the Cadence Virtuoso System Design Platform using the 0.18 µm TSMC CMOS technology.

Art organizations are increasingly focusing on enhancing the visitor experience to attract a wider audience. The aim objective of this study was to explore the key factors that influence the visitor experience of offline art exhibitions and to use a mixed methods to data collection and analysis. The research process was divided into three stages. In the first stage, we conducted semi-structured interviews with 12 respondents by dividing the exhibition experience into three time periods: pre, during, and post-visit. We extracted seven factors affecting visitor experience through qualitative content analysis including marketing, motivation, physical environment, exhibit quality, participation, technology and service facilities; in the second stage, we developed an assessment scale and pretested it; in the third stage, we collected 725 questionnaires to validate the factors of visitor experience in art exhibitions. The results of linear regression analyses showed that all seven key factors had a significant impact on visitor experience. This study constructed a scale to assess the factors of art exhibition experience, which provides theoretical sup-port for in-depth study of art exhibition experience and useful guidance for planning and design-ing art exhibitions to improve the quality of visitors' experience of art exhibitions.

A major challenge of augmented and mixed reality applications is identifying the context and semantics of the real environment. Studies on object and action recognition were developed based on the improvement of machine learning techniques, allowing them to be annotated and recognized. This study aims to characterize current knowledge on the use of machine learning for recognizing objects and actions in augmented and mixed reality environments, increasing context awareness. Therefore, a systematic literature review of works related to these topics was made, using the Scopus and Web of Science knowledge bases. We searched articles and conference reviews or papers published between 2018 and 2022 and selected fifteen studies to be reviewed. The results indicate that there is a great demand for using machine learning to immersive technologies in factories, engineering, entertainment, education, health, among other application domains. However, these real-time interactive systems still have challenges and limitations to be solved, involving network communication, prediction time and the creation of a model that recognize objects and actions in broad contexts. Furthermore, additional research is needed to investigate how object and action recognition can increase context awareness in augmented reality applications.

Quality control is a critical component in industrial manufacturing, directly influencing efficiency, product reliability, and ultimately, customer satisfaction. In the dynamic environment of industrial manufacturing, traditional methods of inspection may not adequately meet the evolving complexity, necessitating innovative approaches to bolster precision and productivity. In this study, we explore the application of mixed reality (MR) technology for real-time quality control in the assembly process. Our methodology involved the integration of smart glasses with a server-based image recognition system, designed to conduct real-time component analysis. The innovative aspect of our study lies in the harmonization of MR and computer vision algorithms, providing immediate visual feedback to inspectors and thereby improving the speed and accuracy of defect detection. YOLOv8 have been adopted in this study for detection object model. The project implementation occurred in a controlled environment to enable a comprehensive evaluation of the system functionality, the identification of possible problems and improvements in the system performance. The results indicated the viability of mixed reality as a powerful tool for enhancing traditional inspection processes. The fusion of MR and computer vision offers possibilities for future advancements in industrial quality control, paving the way for more efficient and reliable manufacturing ecosystems.

The cutter structure and layout scheme of PDC (Polycrystalline Diamond Compact) bits are important factors in improving efficiency. To further improve the drilling efficiency of PDC bits, axe, triangular prism, and cylindrical PDC cutters were used as research objects. Based on the measured granite data, a finite element model of non-homogeneous granite was established and verified by uniaxial compression simulation. The rock-breaking process of different cutter combination schemes was compared using the finite element method, and the parameters in the best scheme were optimized using the Box-Behnken response surface method. The results show that the constructed model of non-homogeneous granite is consistent with the stress-strain relationship of real granite and is reliable. The axe PDC cutter is more aggressive than the other two cutters and is more suitable for the front row of the bit blade tooth arrangement, while the triangular prism cutter is the second most aggressive and is suitable for the rear row of tooth arrangement, and the best combination scheme is the front row of axe cutter and the rear row of triangular prism cutter arranged alternately with the axe cutter. The optimal transverse and longitudinal distances of the optimized triangular prism cutter from the front axe cutter are 10mm and 7mm, and the optimal transverse and longitudinal distances of the rear axe cutter from the front cutter are 10.06mm and 7mm. The drilling speed is more stable during drilling and the PDC bit with mixed tooth arrangement has 16.8% and 16.6% higher rate of penetration(ROP) compared with the bit with single axe cutter and triangular prism cutter, and the drilling speed is more stable during working, which can effectively improve the rock breaking efficiency of the PDC bit. The field application proves that the bit with mixed cutter arrangement is easier to break the complex formations, with more stable ROP and better efficiency. The study can provide theoretical support for the cutter layout of the PDC bit.

This article explores matter collineations (MCs) of static plane-symmetric spacetimes, considering the stress-energy tensor in its contravariant and mixed forms. We solve the MC equations in two cases: when the energy-momentum tensor is nondegenerate and degenerate. For the case of degenerate energy-momentum tensor, we employ a direct integration technique to solve the MC equations, which leads to an infinite-dimensional Lie algebra. On the other hand, when considering the nondegenerate energy-momentum tensor, the contravariant form results in a finite-dimensional Lie algebra with dimensions of either 4 or 10. However, in the case of the mixed form of the energy-momentum tensor, the dimension of the Lie algebra is infinite. Moreover, the obtained MCs are compared with those already found for covariant stress-energy.

The total tree height (h) and diameter at breast height (dbh) relationship is an essential tool in forest management and planning. The height—diameter (h-dbh) relationship had been studied with several approaches and for several species worldwide. The nonlinear mixed effect modeling (NLMEM) has been extensively used and lately the resilient backpropagation artificial neural network (RBPANN) approach has been a trend topic for modeling this relationship. The artificial neural network (ANN) is a computing system based in artificial intelligence and inspired in biological neural network for supervised learning. In this study the NLMEN and RBPANN approaches were used for modeling the h—dbh relationship for Durango pine species (Pinus durangensis Martínez) in mixed-species forest from Mexico. The total dataset considered 1,000 (11,472 measured trees) randomly selected from 14,390 temporary forest inventory plots and the dataset was randomly divided into two parts; 50% for training and 50% for testing. An unsupervised clustering analysis was used to grouped the dataset into 10 clusters based on k-means clustering method and plot-variables like density, basal area, mean dbh, mean h, quadratic mean diameter, altitude and aspect. The RBPANN was performed for tangent hyperbolicus (RBPANN-tanh), softplus (RBPANN-softplus), and logistic (RBPANN-logistic) activation functions for functions in cross product of the covariate or neurons and the weights for the ANN analysis. For both training and testing, 10 classical statistics (e.g., RMSE, R2, AIC, BIC, logLik) were computed for the residual values and assess the approaches for h—dbh relationship. For training and testing, the ANNs approach outperformed the NLMEM approach, and the RBPANN-tanh has the best performance in both training and testing phases.

This paper investigates the physical/virtual dynamics when constructing an immersive environ-ment for medieval courtyard houses in Historic Cairo. Using a VR Lab at a university campus, the paper analyzes a courtyard that symbolizes social resilience and community bonding at the newly rehabilitated Bayt Yakan. The courtyard is reconstructed as a Mixed Object through 3D documentation and scanning the space to develop a photogrammetry and VR experience. The results show that the sense of presence is perceived through a combination of factors and juxta-positions of the real and the virtual including: 1) architectural aesthetics, 2) intangible elements and 3) socio-cultural activities in space. Based on the pilot case study, the paper concludes with proposing a “Geospatial Framework for Immersive Environments and Social Sustainability” that is transdisciplinary, pluralistic and expansive in nature to encompass the multiple narratives of the contested past, and overlay the material and immaterial sustainable features embedded in historical contexts, where the Mixed Reality paradigm becomes an enabler for multiple voices, tools and mediums.

There is an overall scientific consensus that public space and, mainly, space with a high ecological index – most notably experienced in green areas – positively affects individual and collective well-being and urban dwellers’ physical and mental health. However, the ‘reality check’ indicates difficulties in translating the assumed benefits of green space into implementable interventions in urban environments. To examine such an ‘implementation gap’ on the case of Zurich seems valid, given that the ‘green urban agenda’ debate has been embedded in numerous Swiss policies (from the federal to the municipal levels). In narrow terms, the research first focuses on Zurich’s district 9 consisting of two neighborhoods (Altstetten and Albisrieden) – the area under ongoing densification yet with a variety of green spaces, to then elucidate four green space clusters and their 400-meter catchment areas in the mentioned district. The mixed-method approach has been applied at three analytical levels: 1) documentary analysis of multi-scale national policy toolkits, to identify the critical tenets associated with the ‘green urban agenda’, 2) assessment of green spaces in Zurich’s district 9 based on online available quantitative data and on-site observation, to determine their provision, types, size and mutual connectivity, and 3) analysis of four green space clusters within the mentioned district through on-site observation, to identify green space attributes and main activities. Through critical mutual examination of the identified ‘green urban agenda’ principles in the national policies, on the one hand, and green space attributes, on the other, the research findings reveal the extent of the convergence and/or divergence between the ‘green urban agenda’ policy trends and their implementation in practice.

Since people spend most of their time in indoor environments, the objective of this work was to study indoor air quality perception and its effects on users’ thermal comfort. Based on previous data from a building with a central air-conditioning system and two mixed-mode buildings located in the humid subtropical climate of Florianópolis, southern Brazil, statistical analyses were performed. Each user subjective answer obtained through a questionnaire was combined with the corresponding environmental conditions – measured using microclimate stations, a portable thermo-anemometer and a CO2 analyser. Results showed that improvement in air quality was associated with the reduction of air temperature and humidity ratio. Also, there was a significant influence of thermal, air movement and humidity sensation and acceptability of air quality perception. Users felt more satisfied or neutral with air quality for being in thermal comfort, and not because of the CO2 level – which means that air quality perception is influenced by factors other than CO2. This study recommends the implementation of an air exchange device in split air-conditioners with air recirculation used in mixed-mode buildings in Brazil. It is important to provide suitable indoor ventilation to reduce pollutants concentration, ensure good air quality and prevent respiratory diseases.

Due to climate change, droughts have been occurring more frequently in Germany in recent years. More frequent and prolonged drought affects the health of trees and increases the risk of forest fires. A large-scale forest fire broke out near Treuenbrietzen, Brandenburg, in the summer of 2018 in pine monospecific forests. In addition to evaluating the damage caused, future reforestation is discussed, which is related mainly to the expectations of the forest owners. A telephone survey of seven affected forest owners was conducted using a semi-structured guided interview. The results from our interview demonstrated the support of private forest owners for mixed forests over monospecific pine forests. Most forest owners do not prioritize economic benefit with the forest land as forestry was not the primary source of income. Instead, the ownership of the forest tends to be linked to idealistic, cultural, and family values. The motives for reforestation vary but are often externally influenced. Different goals of forest owners lead to the challenge of finding consensus among them. We conclude that forestry advice by the federal and state governments is essential, especially on how climate change can affect local forests, to sensitize private forest owners to this problem.

Biofilms play a crucial role in the development of Candida-associated denture stomatitis. Inhibition of microbial adhesion to PMMA and phosphate containing PMMA has been examined in this work. C. albicans and mixed salivary microbial biofilms were compared on naked and salivary pre-conditioned PMMA surfaces in the presence or absence of antimicrobials (cetyl pyridinium chloride [CPC], KSL-W, histatin 5 [his 5]). Polymers with varying amounts of phosphate (0-25%) were tested using four C. albicans oral isolates as well as mixed salivary bacteria and 24 h biofilms were assessed for metabolic activity and confirmed using Live/Dead staining and confocal microscopy. Biofilm metabolism was reduced as phosphate density increased (15%: P=0.004; 25%: P=0.001). Loading of CPC on 15% phosphated disks showed a substantial decrease (P=0.001) in biofilm metabolism in the presence or absence of a salivary pellicle. Salivary pellicle on uncharged PMMA enhanced the antimicrobial activity of CPC only. CPC also demonstrated remarkable antimicrobial activity on mixed salivary bacterial biofilms under different conditions displaying the potent efficacy of CPC (350 µg/ml) when combined with an artificial protein pellicle (Biotene half strength).

Efficient alternatives in energy production and consumption are constantly investigated by increasingly strict policies. In this way, the pollutant emissions that contribute to the greenhouse effect reduce and sustainability of the electricity sector increase. With more than a third of the world's energy consumption, buildings have great potential to contribute these sustainability goals. Additionally, with growing incentives in the Distributed Generation (DG) and Electric Vehicle (EV) industry, it is believed that Smart Buildings (SBs) can be a key in the field of residential energy sustainability in the future. In this work, an energy management system in SBs are developed to reduce the power demanded of a residential building. In order to balance the demand and power provided by the grid, microgrids such as Battery Energy Storage System (BESS), EVs and Photovoltaic Generation panels (PV) are used. Here, a Mixed Binary Linear Programming formulation (MBLP) is proposed to optimize the charge and discharge scheduling of EVs and also BESS. In order to show the efficiency of the model, a case study involving three scenarios and an economic analysis is considered. The results point a 65% reduction in peak load consumption supplied by grid and a 28.4% reduction in electricity consumption costs.

The aim of this study is to introduce a novel method which can separate sand or gravel dominated bed load transport in rivers with mixed-size bed material. In engineering practice, the Shields-Parker diagram could be used for such purposes, however, the method has certain applicability limits, due to the fact that it is based on uniform bed material and provides information rather on river-scale, instead of reach or local scale. When dealing with large rivers with complex hydrodynamics and morphodynamics the bed load transport modes can also indicate strong variation even locally, which requires a more suitable approach to estimate the locally unique behavior of the sediment transport. Here, we suggest that the decision criteria utilizes the shear Reynolds number (Re*). The method was verified against field and laboratory measurement data, both performed at non-uniform bed material compositions. The comparative assessment of the results show that the shear Reynolds number based method operates more reliably than the Shields-Parker diagram and it is expected to predict the sand or gravel transport domination with a < 5% uncertainty. The introduced results can greatly contribute to the improvement of numerical sediment transport modeling as well as to the field implementation of bed load transport measurements.

Adults with obesity experience high rates of disability and rapid functional decline. Identifying movement dysfunction early can direct intervention and disrupt disability development, however subtle changes in movement are difficult to detect with the naked eye. This study evaluated how a portable, inertial measurement unit (IMU)-based motion capture system compares to a laboratory-based optokinetic motion capture (OMC) system for evaluating gait kinematics in adults with obesity. Ten adults with obesity performed overground walking while equipped with the OMC and IMU systems. Fifteen gait cycles for each participant were extracted for 150 total cycles analyzed. Kinematics were compared between OMC and IMU across the gait cycles (coefficient of multiple correlations), at clinically significant time points (interclass correlations), and over clinically relevant ranges (Bland Altman plots). Sagittal plane kinematics were most similar between systems, especially at the knee. Sagittal plane joint angles at clinically meaningful timepoints were poorly associated except for ankle dorsiflexion at heel strike (ρ=0.38) and minimum angle (ρ=0.83). Most motions had more than 5° difference between systems across the range of angles measured. IMU-based motion capture shows promise for detecting subtle gait changes in adults with obesity. However, more work is needed before this method can replace traditional OMC.

Sombor index was recently defined in 2021 as a new vertex degree based topological index by Gutman and has received great attention of mathematicians and chemists. In this work, we determine how much the Sombor index is effected when we delete a vertex or an edge from a graph. Using the formulae obtained here successively, one can calculate the Sombor indices of large graphs by means of Sombor indices of smaller graphs which are obtained by deletion of vertices or edges.

Amaranth has the potential to support Malawi's food and nutrition security, income generation and livelihoods, and climate change resilience efforts. Due to the high genetic variability of Ama-ranth, there is a need to develop stable and high-yielding genotypes for sustainable production. To determine the degree of genetic stability in different environments, five Amaranth accessions were subjected to stability analysis. The experiment was carried out at three sites (Bunda, Bembeke, and Chipoka) for two seasons in 2020-2021 in the central region of Malawi. It was laid out in Ran-domized Complete Block Design (RCBD) with four replicates. Eberhart and Russell linear regres-sion model was used for stability analysis and Pearson correlation was used to test the relationship between variables. Environmental variance + (genotype x environment) was significant for four of the parameters studied, namely grain yield, plant height, leaf length, and leaf width, indicating the presence of a remarkable interaction between genotypes and environment. The results of a pooled analysis of variance showed significant differences at a 5% significance level among the Amaranth accessions, indicating inherent genetic variability. Using the linear regression model of Eberhart and Russell, accessions PE-LO-BH -01 and LL-BH -04 were identified as the highest yielding stable genotypes for leaf and grain yield, respectively. In addition, Bembeke site was the most favourable environment for all the accessions. Thus, to enhance the production of amaranth in Malawi, LL-BH-04 and PE-LO-BH-01 were put forward for release as varieties for grain and leaf respectively. These results will also guide and support for future breeding programs.

The Randić index of a graph G is the sum of (dG(u)dG(v))−1/2 over all edges uv of G, where dG(u) denotes the degree of vertex u in G. In this paper, we investigate a few graph transformations that decrease Randić index of graph. By applying those transformations, we determine the minimum Randić index on tricyclic graphs, and characterize the corresponding extremal graphs.

Species diversity in microbiome is a cutting-edge concept in metagenomic research. In this study, we propose a multifractal analysis for metagenomic research. From the chaos game representation (CGR) visualization of simulated and real metagenomes, we find that there exists self-similarity in the visualization of metagenomes. Then we compute the multifractal dimensions for simulated and real metagenomes. For simulated metagenomes, we also compute their diversity indices, such as species richness indices, Shannon’s diversity indices and Simpson’s diversity indices respectively for varying value of . Fom the Pearson correlation coefficients between their multifractal dimensions and traditional species diversity indices, we find that the correlation coefficients between the multifractal dimensions and species richness indices and Shannon diversity indices reach their maximums at respectively. The correlation coefficients between the multifractal dimensions and Simpson’s diversity indices reach their maximums at nearly. So the traditional diversity indices can be unified by the frame of multifractal analysis. These results coincided with the similar results in macrobial ecology. Finally, we apply our methods to real metagenomes of 100 infants’ gut microbiomes when they are newborn, 4 months and 12 months. Our results show that multifractal dimensions of infants’ gut microbiomes can discriminate the age difference.

Background and objectives: The clinical advantage of targeting index-based remission criteria (IR) prior to Boolean remission (BR) was evaluated retrospectively. Materials and Methods: A total of 578 patients with rheumatoid arthritis (RA), who were treated for more than three years, were recruited. Patients who were treated to targeted IR and composite measure remission criteria such as BR from the first consultation were divided according to the turn of attaining BR and IR: IB-R, a group that matched IR at the same time BR is attained or earlier; BI-F, a group that attained BR followed by IR or failed; IR-BF, a group that could not attain BR despite attaining IR; Both-F, a group that failed to attain either BR or IR. Background factors were statistically compared among groups. The BR rate in patients who attained IR (BRR) and the rate of failure to attain IR in patients who failed to attain BR (BFR) were statistically evaluated. Results: Groups made of 225, 231, and 482 in IB-R; 160, 154, and 8 in BI-F; 18, 18, and 75 in IR-BF; and 175, 175, and 13 in Both-F when indexing the clinical disease activity index (CDAI), simplified disease activity index (SDAI), and 28-joints disease activity score with C-reactive protein (DAS28-CRP), respectively. Disease activity indices’ scores after BR demonstrated significantly higher in the BI-F group than in the IB-R group. BRR was 92.6%, 92.8%, and 86.5%, while BFR was 71.3%, 71.3%, and 13.8% when indexing CDAI, SDAI, and DAS28-CRP, respectively. Conclusions: Targeting CDAI and SDAI remission prior to BR contributes to a stable clinical course.

In this study we focus on measurements and modeled UV index at the region of Athens, Greece, during a period of a low ozone event. During the period of 12 to 19 of May 2020, total column ozone (TOC) showed extremely low values 35-55 DU (up to 15%) decrease from the climatic mean (being lower than the -2σ). This condition favors the increase of UV erythemal irradiance, since stratospheric ozone is the most important attenuator at the UVB spectral region. A parallel intrusion of Saharan Dust aerosols in the region has masked a large part of the low ozone effect on UV irradiance. In order to investigate the event, we have used spectral solar irradiance measurements from the Precision Solar Radiometer (PSR), total column ozone from the BREWER spectrophotometer and Radiative Transfer Model (RTM) calculations. Model calculations of UV Index (UVI) showed an increase of ~30% compared to the long term normal UVI due to the low TOC while at the same time and for particular days, aerosols masked this effect by ~20%. The study points out the importance of accurate measurements or forecasts of both ozone and aerosols when deriving UVI under unusual low ozone-high aerosol conditions.

In this paper we have discussed the importance of human resource management in project management. As a concept human resource management emerged in 1980 [9]. It is very important to utilize resources effectively in any organization. Like triple constrains (cost, quality, scope) human resources are also considered as one of the most important factor for the success of any project. Management of human resources involve hiring experienced workers, giving appropriate training, acknowledgement about the significance of the project and the effective use of techniques and tools in order to get the project done productively with in time and budget. It becomes the responsibility of the project manager to effectively manage human resources as it is more challenging than managing other technical resources. In this paper we have also discussed the challenges that an organization faced during the management of the resources and use of some strategic human practices in order to overcome these challenges.

Mapping drought from space using, e.g., surface soil moisture (SSM), has become viable in the last decade. However, state of the art SSM retrieval products suffer from very poor coverage over northern latitudes. In this study, we propose an innovative drought indicator with a wider spatial and temporal coverage than that obtained from satellite SSM retrievals. We evaluate passive microwave brightness temperature observations from the Soil Moisture and Ocean Salinity (SMOS) satellite as a surrogate drought metric, and introduce a Standardized Brightness Temperature Index (STBI). The STBI is validated against drought indices from a land surface data assimilation system (LDAS-Monde), two satellite dervied SSM indices and a standardized precipitation index. Finally, we evaluate the STBI against the before mentioned drought indices in a case study of the 2018 Nordic drought. The STBI is found to be superior to the drought index created from satellite derived SSM in both spatial and temporal coverage over the Nordic region. Our results indicate that when compared to drought indices from precipitation data and a land data assimilation system, the STBI is able to capture the 2018 drought onset, severity and extent. Thus, the STBI index could provide additional information for drought monitoring in regions where the SSM retrieval problem is difficult.

Let G[F,Vk, Huv] be the graph with k pockets, where F is a simple graph of order n ≥ 1,Vk= {v1,v2,··· ,vk} is a subset of the vertex set of F and Hvis a simple graph of order m ≥ 2,v is a specified vertex of Hv. Also let G[F,Ek, Huv] be the graph with k edge pockets, where F is a simple graph of order n ≥ 2, Ek= {e1,e2,···ek} is a subset of the edge set of F and Huvis a simple graph of order m ≥ 3, uv is a specified edge of Huvsuch that Huv− u is isomorphic to Huv− v. In this paper, we derive closed-form formulas for resistance distance and Kirchhoff index of G[F,Vk, Hv] and G[F,Ek, Huv] in terms of the resistance distance and Kirchhoff index F, Hv and F, Huv, respectively.

Scarification involves the partial removal of the seed coat on the side of the hilum, opposite the radicle, to speed up germination in acorns. The aim of this study was to determine the influence of scarification on the germination capacity of pedunculate oak acorns, selected and prepared for sowing. The diameter, length and mass of acorns were measured before and after scarification in four batches of acorns harvested from uneven-aged trees (76, 91, 131 and 161 years). The measured parameters were used to determine the correlations between acorn dimensions and mass, and to calculate the dimensional scarification index and the mass scarification index in acorns. Scarified and non-scarified acorns from every batch were germinated on sand and peat substrate for 28 days. The analyzed acorns were characterized by average size and mass. Scarification decreased acorn mass by around 22% and acorn length by around 31% on average. Scarification and the elimination of infected acorns increased germination capacity from around 64% to around 81% on average. Acorns can be divided into size groups before scarification to obtain seed material with varied germination capacity. Larger acorns with higher germination capacity can be used for sowing in container nurseries, whereas smaller acorns with lower germination capacity can be sown in open-field nurseries.

In recent years, there have been concerns raised about construction industrialization in China, which have initiated a wave of policy change in both governmental and industrial organizations in order to change the mode of conventional construction. However, the current development level of regional construction industrialization (RCI) in China has not been well-characterized. This study screened preliminary index systems in five dimensions: technical, economic, sustainable, enterprise development and development environment. Based on the data gathered from the questionnaire surveys and subsequently analyzed, twenty-two critical evaluation indicators were identified. Analytic Hierarchy Process (AHP) was then employed to determine the weighting of each indicator. The evaluation method of the development level was formulated on the basis of the evaluation criteria. Jiangsu Province was used as an example in this study, with the development level of this province being comprehensively examined using a combination of the index system and evaluation method. The results show that Jiangsu has a relatively high RCI development level. The data from analysis scores of five dimensions and twenty-two indicators show that the index system is feasible, with evaluation results being consistent with actual practice. These findings provide a good practical reference for making decisions about how best to guide the development of RCI.

Maize is an important staple food crop in sub-Saharan Africa (SSA). However, the average grain yield on farmers’ fields falls considerably short of the demand of the region’s population. In addition, the normal endosperm maize widely consumed in SSA is deficient in vitamin A. Drought, a consequence of climate change, is a major constraint to maize production, resulting in seasonal low grain yield in farmers’ fields. The objectives of this study were to assess the performance of newly developed extra-early maturing provitamin A hybrids under managed drought and well-watered conditions, compare the outcomes of multiple trait base-index and multi-trait genotype-ideotype distance index selection procedures, and identify drought-tolerant hybrids with stable performance across contrasting environments for commercialization in SSA. One hundred and ninety provitamin A hybrids and six checks were evaluated under managed drought and well-watered conditions at Ikenne for two seasons between 2021 and 2023. A 14*14-lattice design was used for the field evaluations under both research conditions. Drought stress was achieved by the complete withdrawal of irrigation water 25 days after planting. Results revealed significant differences among the hybrids under drought and well-watered conditions. Grain yield, ears per plant, and plant aspect under managed drought were correlated to the same traits under well-watered conditions suggesting that the expression of these traits is governed by common genetic factors. Twenty-nine hybrids were identified as top-performing drought-tolerant hybrids by the multiple trait base index and multiple-trait genotype–ideotype distance index. Of the selected outstanding 29 hybrids, 34% were derived from crosses involving the tester TZEEIOR 197, demonstrating the outstanding genetic potential of this inbred line. Further analysis of the 29 selected hybrids revealed TZEEIOR 509 × TZEEIOR 197 as the hybrid that combined the most drought-tolerant adaptive traits. However, the hybrids TZEEIOR 526 × TZEEIOR 97, TZEEIOR 384 × TZEEIOR 30, TZEEIOR 515 × TZEEIOR 249, TZEEIOR 510 × TZEEIOR 197, TZEEIOR 479 × TZEEIOR 197, and TZEEIOR 458 × TZEEIOR 197 were identified as the most stable hybrids across drought and well-watered conditions. These hybrids should be extensively tested in multi-location trials for deployment and commercialization in SSA.

Background: Extracorporeal cardiopulmonary resuscitation (ECPR) has gradually come to be regarded as an effective therapy, but the hospital mortality rate after ECPR is still high and unpredictable. The present study tested whether age-adjusted Charlson comorbidity index (ACCI) can be used as an objective selection criterion to ensure the most efficient utilization of medical resources. Methods: Adult patients (age ³ 18 years) receiving ECPR at our institution between 2006 and 2015 were included. Data regarding ECPR events and ACCI characteristics were collected immediately after extracorporeal membrane oxygenation (ECMO) setup. Adverse events during hospitalization were also prospectively collected. The primary endpoint was survival to hospital discharge. The second endpoint was short-term (2-year) follow-up outcome. Results: A total of 461 patients included in the study were grouped into low ACCI (ACCI 0–3) (240, 52.1%) and high ACCI (ACCI 4–13) (221, 47.9%) groups. The median ACCI was 2 (IQR: 1–3) and 5 (IQR: 4–7) for the low and high ACCI groups, respectively (P < 0.001). Cardiopulmonary resuscitation (CPR)-to-ECMO duration was comparable between the groups (42.1 ± 25.6 and 41.3 ± 20.7 min in the low and high ACCI groups, respectively; P = 0.754). Regarding hospital survival rate, 256 patients (55.5%) died on ECMO support. A total of 205 patients (44.5%) were successfully weaned off ECMO, but only 138 patients (29.9%) survived to hospital discharge (32.1% and 27.6% in low and high ACCI group, P = 0.291). Multivariate logistic regression analysis revealed CPR-to-ECMO duration and CPR cause of septic shock as significant risk factors for hospital survival after ECPR (P = 0.043 and 0.014, respectively), whereas age and ACCI were not (P = 0.334 and 0.164, respectively). The 2-year survival rate after hospital discharge for the 138 hospital survivors was 96% and 74% in the low and high ACCI groups, respectively (P = 0.002.)Conclusions: High ACCI before ECPR does not predict poor outcome of hospital survival. Therefore, ECPR should not be rejected solely due to high ACCI. However, high ACCI in hospital survivors is associated with a higher 2-year mortality rate than low ACCI, and patients with high ACCI should be closely followed up.

Topological indices have important role in theoretical chemistry for QSPR researches. Among the all topological indices the Randić and the Zagreb indices have been used more considerably than any other topological indices in chemical and mathematical literature. Most of the topological indices as in the Randić and the Zagreb indices are based on the degrees of the vertices of a connected graph. Recently novel two degree concepts have been defined in graph theory; ev-degrees and ve-degrees. In this study we define ev-degree Zagreb index, ve-degree Zagreb indices and ve-degree Randić index by using these new graph invariants as parallel to their corresponding classical degree versions. We compare these new group ev-degree and ve-degree indices with the other well-known and most used topological indices in literature such as; Wiener, Zagreb and Randić indices by modelling some physicochemical properties of octane isomers. We show that the ev-degree Zagreb index, the ve-degree Zagreb and the ve-degree Randić indices give better correlation than Wiener, Zagreb and Randić indices to predict the some specific physicochemical properties of octanes. We investigate the relations between the second Zagreb index and ev-degree and ve-degree Zagreb indices and some mathematical properties of ev-degree and ve-degree Zagreb indices.

Polycystic ovary syndrome (PCOS) is a complex hormonal disorder which impair ovarian function. The adherence to healthy dietary patterns and physical exercise are the first line of recommended treatment for PCOS patients, but it is no clear what type of diet is more adequate. In this case-control study, we explore the association between the adherence to five dietary quality indices widely used and PCOS. We enrolled 126 cases of PCOS and 159 controls (Murcia, Spain). Diagnostic of PCOS and its phenotypes were established following the Rotterdam criteria [hyperandrogenism (H), oligoanovulation (O), polycystic ovaries morphology (POM)]. We used a validated food frequency questionnaires to calculate the scores for five dietary indices: alternate Healthy Eating index (AHEI), AHEI-2010, relative Mediterranean Dietary Score (rMED), alternate Mediterranean Dietary Score (aMED) and Dietary Approaches to Stop Hypertension (DASH). We used multivariable logistic regression to estimate adjusted odds ratios and confidence intervals. In the multivariable analysis, AHEI-2010 index was inversely associated with “H+O” PCOS’ phenotype (ORQ3 VS Q1= 0.1; 95% CI :(0.0; 0.9); P for trend= 0.02). In conclusion, we did not find any statistical significative association between dietary indices and total, anovulatory and ovulatory PCOS, but it seems interesting explore these association among the diverse phenotypes of PCOS in studies with higher sample size.

This study is based on the fatty acid and amino acid profile of 7 edible insect species: Acheta domesticus, Alphitobius diaperinus, Blaptica dubia, Galleria mellonella, Locusta migratoria, Tenebrio molitor and Zophobas morio. The fatty acid distribution within lipid classes (neutral lipids, glycolipids and phospholipids) was studied, while the amino acid profile was used to calculate the species-specific nitrogen-protein conversion factor (Kp). The profiles were used to evaluate the nutritional quality of the lipids and proteins. Oleic acid was the predominant fatty acid in all insects except for A. domesticus, in which a larger percentage of linoleic acid was found. The majority of the lipids were neutral lipids. L. migratoria showed a remarkably high content of α-linolenic acid in its phospholipid fraction, while T. molitor phospholipids were the only fraction in which a measurable amount of docosahexaenoic acid was found. Overall, in most insects, the phospholipid fraction had the highest polyunsaturated fatty acid content compared to the other classes, which may be protective in terms of autoxidative stability. Kp values in the range of 4.17 to 6.43 were obtained. Within the nutritional quality indices, all insects showed healthy fatty acid and high quality amino acid profiles.

Growing population, industrialization, and power requirements are adversely affecting the environment by increased greenhouse gases, resulting from fossil fuel burning. Global greenhouse gas mitigation targets have led the nations to promote clean and self-renewable sources of energy to address the environmental issue. Offshore wind power resources are relatively more attractive due to high winds, less turbulence, minimal visualization effects, and no interaction of infrastructure. The present study aims at conducting offshore wind power resources assessment (OWPRA) at some locations in the Gulf of North Suez. For this purpose, the long-term hourly mean wind speed (WS) and wind direction above means sea level (AMSL) and temperature and pressure data near surface is used. The data is obtained from ERA5 (fifth generation reanalysis for the global climate weather) at chosen six (L1-L6) offshore locations. The data covers a period of 43 years, between 1979 and 2021. The WS and direction are provided at 100 m AMSL while temperature and pressure are available near water surface level. At L1 to L6 locations, the log-term mean WS and wind power density (WPD) values are found to be 7.55 m/s and 370 W/m2, 6.37 m/s and 225 W/m2, 6.91 m/s and 281 W/m2, 5.48 m/s and 142 W/m2, 4.30 m/s and 77 W/m2, and 5.03 and 115 W/m2 and at 100 m AMSL; respectively. The higher magnitudes of monthly and annual windy site identifier indices (MWSI and AWSI) of 18.68 and 57.41 and 12.70 and 42.94 at L1 and L3 sites and generally lower values of wind variability indices are indicative of favourable winds source, which is also supported by higher magnitudes of mean WS, WPD, annual energy yields, plant capacity factors, and wind duration at these sites. The cost of energy, for the worst and the best cases are estimated as 10.120 USD/kWh and 1.274 USD/kWh at L5 and L1 sites corresponding to wind turbines WT1 and WT4. Based on the analysis, sites L1, L3, and L2 are recommended for wind farm development in order of preference. The wind variability and windy site identifiers indices introduced, will help decision-makers in deciding the potential windy sites with more confidence.

Blood image intensity has been used to detect erythrocyte sedimentation rate (ESR). However, it does not give an information on biophysical properties of blood sample under continuous ESR. In this study, three physical properties, including, τ₀, ESR_τ, and AI_I, are suggested to quantify mechanical variations of blood under continuous ESR. To demonstrate the proposed method, blood sample is loaded into a driving syringe. The blood flow rate is set in a periodic on–off pattern. Blood sample is then supplied into a capillary chip, and microscopic blood images are captured at specific intervals. Blood shear stress is quantified from the interface of blood stream in the coflowing channel. Both τ₀ and ESR_τ are then obtained by analyzing the blood shear stress. Simultaneously, the AI_I is evaluated by analyzing the image intensity of blood flow. According to the experimental results, the τ₀ exhibits consistent trends with respect to hematocrit as well as diluent. The ESR_τ and AI_I showed a reciprocal relationship each other. Three suggested properties represented substantial differences for suspended blood samples (i.e., hardened red blood cells, different concentration of dextran solution and fibrinogen). In conclusion, the present method can detect variations of blood sample under continuous ESR effectively.

Against the backdrop of global climate change, the frequency of drought events is increasing, leading to significant impacts on human society and development. Therefore, it is crucial to study the propagation patterns and trends of drought characteristics over a long-time scale. The main objective of this study is to delineate the dynamics of drought characteristics by examining their propagation patterns in China from 1951 to 2020. In this study, precipitation data from meteorological stations across mainland China were used. A comprehensive dataset consisting of 700 stations over the past 70 years was collected and analyzed. To ensure data accuracy, the GPCC database was employed for data correction and gap filling. Long-term drought evolution was assessed using both the SPI-12 and SPEI-12 indices to detect drought characteristics. Two Moran indices were applied to identify propagation patterns, and the MK analysis method along with the Theil-Sen slope estimator were utilized to track historical trends of these indices. The findings of this study reveal the following key results: (i) Based on the SPI-12, the main areas of China that are prone to drought are mostly concentrated around the Hu Huanyong Line. Indicating a tendency towards drying based on the decadal change analysis. (ii) The distribution of drought-prone areas in China, as indicated by the SPEI-12, is extensive and broadly distributed, with a correlation to urbanization and population density. These drought-prone areas are gradually expanding. (iii) Between 2010 and 2011, China experienced the most severe drought event in nearly 70 years, affecting nearly 50% of the country's area with a high degree of severity. This event may be attributed to atmospheric circulation variability, exacerbated by the impact of urbanization on precipitation and drought. (iv) The frequency of drought occurrence in China gradually decreases from south to north, with the northeast and northern regions being less affected. However, areas with less frequent droughts experience longer and more severe drought durations. In conclusion, this study provides valuable insights into the characteristics and propagation patterns of drought in China, offering essential information for the development of effective strategies to mitigate the impacts of drought events.

The approach to the personal experience and previous ideas about Physical Education of future Primary Education teachers is a starting point of great interest for the teaching of the subject of Didactics of Physical Education. The study aims to investigate these prior beliefs and to verify to what extent this initial perception changes after taking the course on “Didactics of Physical Education”. A concurrent mixed-methods study was conducted, which included two data collection procedures: (1) a pre-experimental design with a single group featuring pre-test and post-test; (2) the analysis of students' autobiographical accounts of their school experience with physical education. The participants were students enrolled in the Bachelor’s degree program in Primary Education at the University of Santiago de Compostela (USC) who undertook the course last year. The results obtained reveal that after taking the subject of Didactics of Physical Education, students give greater value to more positive concepts of learning, socializing, participating, and playing, among others. Similarly, in the post-test, the assessment of concepts such as competitiveness and physical fatigue diminished. In their autobiographical memories, students associate good memories with relationships with classmates and the playful and socializing nature of the subject; and among the bad memories, they highlight the content related to physical performance, competitiveness, and lack of attention to the diversity of students and their individual characteristics.

Background and aims. Clinically significant delayed bleeding (CSDB) may complicate endoscopic colorectal submucosal dissection (ESD). Methods. We assessed the results of a prospective registry of colorectal ESD. We evaluated the effect of clip closure and PuraStat application for prevention of CSDB. Results. 40 patients with 41 colorectal ESD were included. ESD was successful in 38 lesions (92.7%), 35 with R0 resection (92.1%) and 33 with curative resection (86.8%). CSDB occurred in 3 out 38 lesions (7.9%, 95% CI [1.7 – 21.4%]), exclusively after rectal ESD (3 of 22 rectal lesions vs. 0 of 16 colonic lesions, p = 0.249). Clip closure was more frequently used after colonic ESD (12 of 16 colonic lesions vs. 2 of 22 rectal lesions, p < 0.001) and was not protective for CSDB in univariate analysis, even though no events occurred after clip closure (0 of 14 lesions with clip closure vs. 3 of 27 lesions without, p = 0.283). PuraStat was more frequently applied after ESD for rectal lesions (16 of 22 rectal lesions vs. 2 of 16 colonic le-sions, p < 0.001) and was not protective for CSDB, all three events occurring after PuraStat application (3 of 21 lesions with PuraStat application vs. 0 of 20 lesions without, p = 0.097). Conclusions. CSDB occurred exclusively after rectal ESD, and no predictive factors were identified in uni-variate analysis. Clip closure and PuraStat application were not protective for CSDB.

This study presents a critical literature review on the models of users' adoption of blockchain applications in supply chains. This review pertaining to blockchain technology adoption by supply chain stakeholders is significant as it is a pre-requisite for the technical sustainability of blockchain technology in supply chains. Through a critical literature review, the previous studies related to technology adoption models were analyzed to explore practices brought about by blockchain applications for supply chain management. This study examined the suitability of the existing models (e.g., the technology-organization-environment (TOE) framework, task technology fit (TTF), unified theory of acceptance and use of technology (UTAUT)) of technology adoption for blockchain applications in supply chains and came up with a new unified model, namely, TOE-TTF-UTAUT. This review provides implications for a more appropriate research design using mixed methods. When adopting the TOE-TTF-UTAUT model in a study, two phases of research using mixed methods can be performed. The first phase is an exploratory sequential design in which a qualitative approach to explore the TOE and supply chain task constructs is followed by a quantitative approach using a survey and quantitative analyses to investigate the factors affecting blockchain adoption in supply chains. The second phase adopts explanatory sequential design in which the quantitative findings from the first phase are reviewed for follow-up by qualitative interviews to obtain explanations.

Unmanned aerial vehicle (UAV), or drone is recognized for its potential to improve efficiency and address last-mile delivery issues. As a result, there has been a lot of activity in recent years in the field of drone scheduling and routing. Unlike the vehicle routing problem, drone route design is difficult due to several operational characteristics, such as speed optimization, multitrip operation, and energy consumption estimation. On the one hand, drone energy consumption is a complex nonlinear function of both speed and payload in practice. On the other hand, the high operating speed of drones can significantly curtail the drone range, thereby limiting the efficiency of drone delivery systems. Most of the existing drone delivery models either assume constant drone speed or do not consider the effect of drone speed and parcel weight on energy consumption, leading to costly or energy-infeasible routes. This paper addresses the trade-off between speed and flight range in a multi-trip drone routing problem with variable flight speeds (DRP-VFS), in which a team of homogeneous drones is employed for delivery services. We propose a new model to particularly consider energy constraints using a nonlinear energy consumption model and treat drone speeds as decision variables so that various drone speeds can be adopted in applications. The DRP-VFS is initially formulated as mixed-integer linear programming (MILP) to minimize total energy consumption. To solve large-scale instances, we propose a three-phase adaptive large neighborhood search (ALNS) algorithm. The experimental results demonstrate that suboptimal solutions can be found effectively in practical scenarios using the proposed method. Furthermore, results indicate that operating drones at variable speeds leads to about 21% of energy savings compared to fixed speeds, boasting advantages in cost-savings and range extensions.

New digital interventions have shown potential in managing asthma and improving patients' quality of life compared with conventional interventions. Our objective was to conduct an exhaustive survey of the application of digital health technologies in evaluating, treating, and self-managing psychological and psychopathological elements linked to asthma. We analyzed a compendium of research papers and systematic reviews pertaining to asthma, encompassing themes such as outdoor air pollution, early life wheezing disorders, atopic dermatitis, digital strategies for asthma self-management, psychiatric conditions and asthma, familial impacts on pediatric asthma, and the utilization of mobile health apps for managing asthma. We scrutinized eight chosen studies to evaluate the capacity of digital health technologies to enhance the man-agement and treatment outcomes of psychological factors related to asthma. The studies under review indicate that eHealth interventions, mixed reality instruments, mHealth technolo-gy-augmented nurse-led interventions, and smartphone apps incorporating Bluetooth-enabled sensors for asthma inhalers can markedly enhance self-management of symptoms, quality of life, and mental health outcomes, particularly in children and adolescents with asthma. Nonetheless, additional research is required to ascertain their efficacy and practicability across diverse populations and environments. Customized interventions that cater to the unique needs and preferences of asthma patients and associated psychological elements are vital to ensure the persistent and equitable adoption of these technologies. We underscore the significance of addressing psychological elements in the management and treatment of asthma and advocate for ongoing research and development in this domain.

The COVID-19 pandemic caused many enduring changes in everyday life of families with negative effects on parents’ and children well-being. However, literature lacks of studies exploring emotional reactions and coping strategies of both mothers and children of different ages. Furthermore, most studies used only self-reports. This study aimed to identify the emotions and coping strategies of children, adolescents and their mothers and to verify the association between maternal and children well-being. A mixed-method design using interviews and questionnaires was applied to collect information on well-being (emotional reactions, behavioral/emotional problems) and coping strategies of both mothers (n=65), and their children (n=35, 8-10 year; n=30, 11-13 year) during the second wave of the pandemic (December 2020). No differences between the groups emerged concerning the emotional reactions reported. In contrast, mothers and children of different ages reported different self-regulation and other-regulation strategies. Moreover, maternal strategies had different effects on children well-being. The integration of qualitative and quantitative results was informative to understand how families adapted to the radical changes of everyday life caused by the pandemic. Implications for developing interventions in such similar stressful situations to promote family well-being are discussed.

Wave buoy measurements were carried out near the north-eastern Black Sea coast at the natural reserve Utrish in 2020-2021. In total, about 11 months of data records were collected during two stages of the experiment at 600 and 1500 meters offshore and depths of 18 and 42 meters. The measured waves propagate almost exclusively from the seaward directions. Generally, the waves do not follow the local wind directions, thus, implying a mixed sea state. Nevertheless, dimensionless wave heights and periods appears to be quite close to the previously established empirical laws for the wind-driven seas. The results of the wave turbulence theory are applied for estimates of spectral energy fluxes and their correspondence to the energy flux from the turbulent wind pulsations. These estimates are consistent with today's understanding of wind-wave interaction. It is shown that the main fraction of the wind energy flux goes to the direct Kolmogorov-Zakharov cascade to high wave frequencies and then to dissipation in small scales. Less than 1% of the wind energy flux is directed to low frequency band (the so-called inverse Kolmogorov-Zakharov cascade), thus, providing wave energy growth.

Establishment of mixed-forests has gained increasing attention as a way to optimize forest production, to improve ecological benefits and as a safety net for impacts of future climate uncertainties. However, practical knowledge about which species and what proportion of them should be mixed is still lacking. Thus, this study was conducted with the aim of identify suitable species for mixture with Acacia cincinnata. The mixture tested in the present study was A. cincinnata + Eucalyptus robusta (6:4), A. cincinnata + Acacia mangium (3:1) and monospecifc plantation of A. cincinnata established in 2014. After 7 years of growth, we analyzed the effects of species mixture on growth of tree species, understory vegetation and soil physico-chemical properties as well as bacterial community structure and diversity. The results showed that species mixture had no significant effect on growth characteristics, such as diameter and singletree volume of A. cincinnata. However, mixed-species planting increased the total stocking volume compered to monospecific plantation of A. cincinnata. Furthermore, stand mixture significantly increased species diversity, biomass and nutrient stocks in the understory vegetation. The soil of mixed stand of A. cincinnata and A. mangium had the highest C and N contents, whereas the soil of pure A. cincinnata stand had the highest P content. The diversity of soil bacterial community were the highest in the mixed stand of A. cincinnata and E- robusta, followed by pure A. cincinnata stand and A. cincinnata + A. mangium stand. The relative abundance of Proteobacteria and Actinobacteria was higher in soils of mixed stands. Furthermore, the relative abundance of Firmicutes was high in the soil of A. cincinnata + A. mangium while the relative abundance of Verrucomicrobia was high in A. cincinnata + E. robusta stand. As a whole, the study demonstrated that establishing mixed-species plantation enhance the diversity and composition of understory vegetation, soil physico-chemical and soils bacterial community; thereby increasing biodiversity, nutrient cycling and carbon sequestration in the biomass and soil. From the viewpoints of forest productivity and ecological benefits, it is advisable to establish a mixed plantation of A. cincinnata and A- mangium in southern China. As a whole, our work revealed that the sustainability of mixed-species plantation relies on the interactions between soil attributes, vegetation, and bacterial community.

[Co(AMPY)(DAPY)Cl2(H2O)].H2O (1) [Cu(AMPY)(DAPY)Cl2(H2O)].H2O (2) [Zn(AMPY)(DAPY)Cl2(H2O)] (3) were prepared from the ligands; AMPY = 2-amino-4-methylpyrimidine (L1), DAPY = 2,3-diaminopyridine (L2) and CoCl2.6H2O, CuCl2.2H2O and ZnCl2 in water/ethanol solutions and the three products characterized by elemental analysis, ultraviolet-visible spectroscopy (UV–Vis), Fourier-transform infrared spectroscopy (FT-IR), magnetic susceptibility, molar conductivity methods, and TGA analysis. The X-ray powder diffraction of the Co(II), Cu(II), and Zn(II) compounds showed that the geometry of monoclinic and SEM analysis revealed their morphology with a smooth surface. Molecular modeling was performed for all compounds using the density functional method DFT/B3LYP to study the structures and the frontier molecular orbitals (HOMO and LUMO). We have used Gaussian09 software for the calculations. In this study, different complexes were tested against Gram negative and Gram positive bacterial species to give insight into their broad-spectrum effects. The used pathogenic strains were two Gram positive species "Staphylococcus aureus and Micrococcus luteus" and two Gram negative species "Salmonella thyphimurium and Escherichia coli. The antifungal activity was evaluated against a pathogenic reference strain of the yeast Candida albicans. The antimicrobial and antioxidant assay results demonstrate that the tested compounds are effective against Gram positive and negative bacteria. Additionally, the compounds have an antifungal effect against Candida albicans with a maximum inhibitory zone of 2.5cm. The results demonstrated high antioxidant potential for the Zn(II) complex with a DPPH scavenging of 91.5%, however, the Cu(II) complex was low (16.5%). The data of docking with tyrosyl-tRNA synthetase presented that all compounds fit very well in the catalytic pockets of the proteins of the receptor.

Economic expedience of waste heat recovery systems (WHRS), especially for low temperature difference applications, is often questionable due to high capital investments and long pay-back periods. By its simple design isobaric expansion (IE) machines could provide a viable pathway to utilize otherwise unprofitable waste heat streams for power generation and particularly for pumping liquids and compression of gases. Different engine configurations are presented and discussed. A new method of modelling and calculation of the IE process and efficiency is used on IE cycles with various pure and mixtures as a working fluid. Some interesting cases are presented. It is shown in this paper, that the simplest non-regenerative IE engines are efficient at low temperature differences between a heat source and heat sink. Efficiency of non-regenerative IE process with pure working fluid can be very high approaching Carnot efficiency at low pressure and heat source/heat sink temperature differences. Regeneration permits to increase efficiency of the IE-cycle to some extent. Application of mixed working fluids in combination with regeneration permits to significantly increase the range of high efficiencies to much larger temperature and pressure differences.

Global use of single-use non-biodegradable plastics, like bottles made of polyethylene tereph-thalate (PET), have contributed to catastrophic levels of plastic pollution. Fortunately, microbi-al communities are adapting to assimilate plastic waste. Previously, our work showed a full consortium of five bacteria capable of synergistically degrading PET. Using omics approaches we identified key genes implicated in PET degradation within the consortium’s pangenome and transcriptome. This analysis led to the discovery of a novel PETase, EstB, discovered to hydrolyze oligomer BHET, and polymer PET. Besides genes implicated in PET degradation, many other biodegradation genes were discovered. Over 200 plastic and plasticizer degrada-tion related genes were discovered through the Plastic Microbial Biodegradation Database (PMBD). Diverse carbon source utilization was observed by a microbial community-based as-say, which paired with an abundant number of plastic and plasticizer degrading enzymes in-dicates a promising possibility for mixed plastic degradation. Using RNAseq differential analysis, several genes were predicted to be involved in PET degradation including aldehyde dehydrogenases and several classes of hydrolases. Active transcription of PET monomer me-tabolism was also observed, including the generation of polyhydroxyalkanoate (PHA) bi-opolymers. These results present an exciting opportunity for the bio-recycling of mixed plastic waste with upcycling potential.

The mutualistic interactions between the oleaginous yeast Lipomyces starkeyi and the green mi-croalga Chloroidium saccharophilum in mixed cultures were investigated to exploit possible syner-gistic effects. As a matter of facts, microalga could act as an oxygen generator for the yeast, while the yeast could provide carbon dioxide to microalga. A lignocellulosic hydrolysate from steam exploded Arundo donax (Giant reed) was used as low cost feedstock. The overall lipid content and lipid productivity obtained in the mixed culture treating the hydrolysate of Arundo donax were equal to 0.081 glipid.gbiomass-1 and 37.2 mglipid.L-1.d-1, respectively. They represented promising re-sults if compared to the model systems where synthetic media were used. This study provided new input for the integration of Single Cell Oil (SCO) production with agro-industrial feedstock and the fatty acid distribution mainly consisting of stearic (C18:0) and oleic acid (C18:1) allows promising applications in biofuels, cosmetics, food additives and other products of industrial interest.

Meloidogyne javanica causing root-knot nematode in soybean is an important problem in soybean areas, leading to several yield losses. Some accessions have been identified carrying resistance loci to this nematode specie. In this study, a set of 317 soybean accessions were characterized for resistance to M. javanica. Genome-wide association study (GWAS) was performed using SNPs from genotyping-by-sequencing (GBS), and a region of 29.2 Kbp on chromosome 13 was identified. The haplotype analysis showed that SNPs were able to discriminate susceptible and resistant accessions, leading to 25 accessions sharing the resistance locus. Furthermore, 5 accessions may be new M. javanica resistance sources. The screening of the SNPs in the USDA soybean germplasm showed that several accessions previous reported as resistance to other nematodes also showed the resistance haplotype on chromosome 13. High levels of concordance among the phenotypes of Brazilian cultivars and the SNPs in chromosome 13 were observed. A in silico analysis of the mapped region on soybean genome revealed a presence of 5 genes with structural similarity with major resistance genes. The expression levels of the candidate genes in the interval demonstrated a potential pseudogene, and other two model genes up-regulated in the resistance source after pathogen infection. The SNPs associated to the region conferring resistance is a important tool for introgression of the resistance by marker-assisted selection in soybean breeding programs.

We describe the direct formation of mixed-phase (1T and 2H) MoS2 layers on Si as a photocathode via atomic layer deposition (ALD) for application in the photoelectrochemical (PEC) reduction of water to hydrogen. Without typical series-metal interfaces between Si and MoS2, our p-Si/SiOx/MoS2 photocathode showed efficient and stable operation in hydrogen evolution reactions (HERs). The resulting performance could be explained by spatially genuine device architectures in three dimensions (that is, laterally homo and vertically heterojunction structures). The ALD-grown MoS2 overlayer with the mixed-phase 1T and 2H homojunction passivates light absorber and surface states and functions as a monolithic structure for effective charge transport within MoS2. It is also beneficial in the operation of p-i-n heterojunctions with inhomogeneous barrier heights due to the presence of mixed-phase cocatalysts. The effective barrier heights reached up to 0.8 eV with optimized MoS2 thicknesses, leading to a 670 mV photovoltage enhancement without employing buried Si p-n junctions. The fast-transient behaviors via light illumination show that the mixed-phase layered chalcogenides can serve as efficient cocatalysts by depinning the Fermi levels at the interfaces. A long-term operation of ~ 70 h was also demonstrated in a 0.5 M H2SO4 solution.

Hepatitis-C is one of the most common viral diseases caused by hepatitis C virus (HCV). It is responsible for millions of deaths each year in the developing world. The common dissemination paths of HCV include the use of contaminated water and transfusion of infected blood. Control of this virus has become a challenge for scientists and health professionals due to its versatility and adaptability in different host environments. Along with other problems, lack of efficient diagnosis, quantification and genotyping of viral strains are the major hindrances in a management of this notorious epidemic. The knowledge of HCV genotype and an amount of virus in patient’s blood are pre-requisites to determine the duration and method of treatment. In this review, we discuss the implications of HCV molecular diagnostic methods and their clinical applications. We conclude that while, several commercial and home-brewed methods are available for this purpose, and there is a visible vacuum for cost effective, robust, sensitive assays that can detect multiple viral genotypes in a single reaction. We are of the view that the level of sensitivity offered by Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR) technique is unequivocal as compared to other techniques. Therefore, researchers may explore further possibilities using this technique in the management of HCV.

At present European buildings typically consume two to five times more energy than predicted at the design stage. An important cause of this performance gap is the discrepancies between the design specification and the As-Built condition. Such discrepancies are mainly due to the gaps in knowhow between design, production and construction professionals. Design is more and more contained into a virtual environment and loses touch with the physical production and construction sites. As the construction sector enters the Industry 4.0 era, Building Information Modelling (BIM) based Mixed Reality can intertwine virtual and real worlds to bridge the knowhow gaps.

We present a generalized state-space model formulation particularly motivated by an online scheduling perspective. Through these proposed generalizations, we enable a natural way to handle routinely encountered disturbances and a rich set of corresponding counter-decisions. Thereby, greatly simplifying and extending the possible application of mathematical programming based online scheduling solutions to diverse application settings.

The numerical simulation of entropy generation at mixed natural free and forced convection flow in a square lid-driven cavity filled with an eletrically conducting binary fluids saturated porous media in the presence of a magnetic field is performed in this investigation. Both the top and bottom horizontal walls of the cavity are kept at constant and different temperatures while the left and right vertical walls are adiabatic and insulated. The magnetic field is applied in normal direction to the cavity. The Darcy model, including Brinkman term relative to viscous effects and Forchheimer term due to inertial forces, is used for the momentum equations, and the SIMPLER algorithm, based on the control volume finite-element method approach is used to solve the pressure –velocity coupling. The flow pattern and the heat transfer characteristics inside the cavity are presented in the form of isotherms, streamlines and isentropic lines and average Nusselt number trend. The entropy generation rate is determined for various values of Darcy number (10^-3 ≤ Da ≤ 1) and for a range of Hartmann number (0 ≤ Ha ≤ 10²). This study is limited to Pr = 7 which corresponds to water. It is observed that entropy generation is very affected by the variations of dimensionless control parameters considered.

Karst peaks and depressions are scattered in karst zones with strong spatial heterogeneity and fragile ecological environments and are crucial for determining the degree of karst geomorphologic development. However, realizing automatic depiction and extracting depressions with high accuracy is difficult because of their complex morphology. Herein, based on 12.5-m resolution DEM data, six typical karst peaks from depressions in southwest China were selected as the study areas and a revised terrain openness index method based on slope mutation points (ROBSMPs) was used to determine the degree of karst geomorphologic development and the boundary of karst depressions. The extent of depressions extracted by ROBSMPs and the terrain openness index method with the extent of depressions hand-drawn based on remote sensing images was compared and analyzed. The results show that compared with the topographic openness index method, the overall accuracy of karst depression extracted by ROBSMPs was improved and the perimeter, area, and raster displacement error indexes were reduced. ROBSMPs realized high-precision extraction of depressions, thereby strengthening the applicability of the topographic openness index method to karst peak zones. This study offers a new perspective and path toward the expansion of digital terrain analysis technology in karst mountainous areas and is expected to play a vital role in the extraction of similar geomorphic units in karst zones.

Background: Research articles are essential for describing new ideas, techniques, and procedures and consolidating concepts. It creates an opportunity to expose studies and publicly assimilate published knowledge. Therefore, one of them is the most used and accepted index to verify the author’s scientific impact is the H-index or Hirsch index. It provides a robust single metric that combines quality and quantity. Therefore, it presents disadvantages, (1) researchers with shorter scientific carriers may have fewer articles and citations than those with longer scientific life; (2) it allows scientists to receive citations even if no new papers are published; (3) it is only useful for comparing the better scientists in a field; (4) this indicator can never decrease; (5) it is only weakly sensitive to the number of citations received; (6) the major and minor (or no) contributor in the research gained equal h-index. Then, the H-index ignores the total of citations and the time of a researcher's experience (“scientific age” [sa]). Objective: Thus, the goal of this study was to present a new index system (GFsa index ©) based on the two variables completely forgotten (total of citations and “scientific age”), introducing a new terminology “scientific age”, to evaluate the best-ranked researchers in Dentistry. Methods: The AD Scientific Index was used, and all researchers included in this study were cited in the AD Scientific Index (2024) in the Dentistry field and had the Google Scholar page accessible for a consultation to manually obtain the total of citations and calculate the “scientific age”. The information was retrieved by two authors (G.V.O.F. and J.C.H.F.), who assessed the data twice to avoid errors or mistakes. For inclusion: a minimum H-index value of 30; for exclusion: (i) the author did not have a Google Scholar page; (ii) duplicated author; or (iii) presented any suspicious activities about manipulation of articles. Then, a dataset of all researchers who were reported in Dentistry was prepared (name, H-index, i10 index, and publications). The formula developed and applied was GFsa=(total number of citations)/(“scientific age)². The Pearson correlation statistically evaluated the data obtained; the confidence interval was 95%. Results: A total of 9,093 researchers in Dentistry were recorded, of whom 1,020 were included. Then, we collected all 1,020 researchers' Google Scholar data (publications, citations, and indexes), and each researcher's total citations and “scientific age” were registered and calculated. The mean “scientific age” registered was 34.18 ± 13.34 (standard error of mean = 0.4181). With this information and data collected, GFsa index © was calculated, presenting a minimum value of 0.2186 and a maximum of 154.8 (mean = 10.33 ± 11.82; standard error of mean = 0.3706). Then, the data was organized and sorted following the ranking obtained in the GFsa index ©. The Pearson correlation showed that the H-index had a weakly positive association with the researcher’s “scientific age”; this fact means that the H-index will increase according to the “scientific age” increase. Otherwise, a moderately negative correlation between GFsa and “scientific age” was demonstrated, whereby a higher GFsa © had a lower “Scientific age”. This assessment shows that the variables introduced were fairly used. Moreover, a positive correlation was observed between both indexes (H-index and GFsa). Conclusion: It is possible to conclude that the new variable reported (“Scientific age”) and using the total citations brought a fairer and more feasible evaluation among the researchers. Thus, we are launching the new GFsa index © and the new information named “Scientific age” for the first time in the literature. The future perspective of the GFsa © application will be (1) the evaluation of the 9,093 researchers in Dentistry (total initially registered), including more authors/researchers in the Dentistry field, (2) expanding the exposition of this new index for other areas of the knowledge, and (3) provide free access of all data through the website (http://gfindex.us.to).

This study aims to assess the operational capabilities of disaster and emergency management re-sources (DEMRs), which are pivotal in mitigating risks and minimizing losses amid the increas-ing frequency of disasters. The research constructs an effective operational capability evaluation system for DEMRs, encompassing four key aspects: resource planning, organizational manage-ment capability, resource support capability, and information processing capability. It focuses on identifying the factors that influence the effective operational capability of DEMRs in China and Korea, comparing and analyzing the relative importance and priority of each evaluation domain and indicator within these countries to enhance DEMRs' operational effectiveness. The method-ology involves calculating and ranking the weight of the four domains, with findings indicating that organizational management capability is most significant in China, whereas resource sup-port capability is prioritized in Korea. A comparative analysis of the local weight of indicators within each domain revealed the largest discrepancy between China and Korea in the infor-mation processing capability domain. The study concludes by calculating global weights, identi-fying fast response capability and resource allocation capability as the most impactful factors on DEMRs' operational capability, highlighting their critical role in disaster and emergency man-agement.

The high genetic diversity of the tomato and its high micronutrient content make this fruit very interesting from an economic and nutritional point of view. The genetic erosion suffered by this crop, due to breeding objectives based on yield and marketing, makes it necessary to return to the origins in search of the nutritional and organoleptic quality lost in traditional varieties. In this study, the agronomic, physical, organoleptic and nutritional characteristics of eighteen F1 hybrids obtained by crossing fourteen traditional varieties, previously selected for their quality, were studied to select genotypes of superior quality that could be candidates for new. All parameters studied were strongly influenced by genotype, showing a wide range between cultivars. Principal Component Analysis revealed the characteristics of each hybrid that made it stand out from the others. Some hybrids (H3, H4, and H6) stand out because of their high concentration of active compounds, others (H16, H15, H10, H17, H9, and H11) because of agronomic performance and high content of β-carotene, and H5 was the only one to contain chlorophyll in their ripe fruits. Finally, the evaluation index allowed the selection of five hybrids with interesting characteristics, combining good yield performance and high quality

The anthropometric features offer an overall image of the nutritional status. The investigated groups were aged 19 and 21. The anthropometric measurements of height and weight were recorded following standard procedures. The objectives of this study were to evaluate the harmonious body development, the nutrition status and the body composition. The evolution of the stature increases until 20 years after which stagnation follows. The body mass index of subjects was found to be normal. The body fat may vary over time in subjects depending on age and gender. Body water and body muscle mass content increased with age. The harmony of body development was assessed by means of the Amar index. Regarding the constitutional index, the women subjects belong to the leptosome type and the male subjects belong to the picnic type. The status of the investigated subjects is within the average stature.

The proposed research study explore the decision tool for cropwise variability of NDVI using RS techniques and GIS tool as a crucial indicators for monitoring vegetation status.A small case study for Parbhani district of Maharashtra, India was conducted using Landsat-9 satellite images of the Rabi season in the year 2022-23 were processed using ArcGIS 10.7 software to derive the NDVI values. During the analysis, the maximum NDVI in the study area was recorded at 0.5857 on February 03, 2023, while the minimum was observed as -0.1018 on February 19, 2023. For specific crops, the average NDVI ranged from 0.1183 to 0.3189 for wheat, 0.1679 to 0.2891 for jowar, and 0.1163 to 0.3367 for gram. The mean NDVI values for wheat, jowar, and gram crops during the Rabi season of 2022-23 were 0.218, 0.219, and 0.217, respectively.Furthermore, the average NDVI values exhibited an increasing from the initial stage to the mid-crop growth stage, followed by a decrease during the end-season stage for wheat, jowar, and gram crops. Interestingly, the mean NDVI values of major Rabi crops, wheat, jowar, and gram for the year 2022-23, is approximately similar to the mean NDVI values observed for of year 2022-23.

To investigate whether high body mass index (BMI) increases the risk of recurrence and corre-lates with higher glucose uptake in recurrent lesions in post-menopausal female patients with breast cancer. The hospital database was searched to retrieve breast cancer patients, who had undergone an [18F]FDG PET/CT scan before neoadjuvant chemotherapy and curative-intent sur-gery. BMI was calculated at the baseline [18F]FDG PET/CT scan. There was a median follow-up of 5 years after the baseline PET/CT scan to identify: recurrence in the breast (T_rec); lymph nodes (N_rec); distant locations (M_rec). Furthermore, SUVmax was measured in the sites of recur-rence. A chi-square test was used to investigate any difference in the frequency of any recur-rence, T_rec, N_rec, and M_rec between overweight women (BMI≥25 kg/m2) and women with a BMI<25 kg/m2 (p<0.05). SUVmax, was compared using a t-test (p<0.05) between the two groups. A total of post-menopausal 142 women (BMI: 26.84±5.59; 84 overweight and 58 with normal weight) were retrieved. There were 48 recurrences at the follow-up. The chi-square test demon-strated in overweight women an increased frequency of any recurrence (35 vs. 13; p=0.025) and T_rec (15 vs. 2; p=0.018) and a higher T_rec SUVmax (4.74±2.90 vs. 1.85 ± 0.63; p=0.09) compared to women with a BMI<25 kg/m2. BMI seems to correlate with an increased rate of recurrence, espe-cially in the breast, and a higher glucose uptake in post-menopausal patients with recurrent breast cancer.