Several criteria exist to diagnose pulmonary aspergillosis with varying degrees of certainty in specific populations, including oncohaematological patients (EORTC/MSG), ICU patients (AspICU) and Covid-19 patients (ECMM). At the beginning of the pandemic, however, the diagnosis of Covid-19 Associated Pulmonary Aspergillosis (CAPA) could not be performed easily, and the decision to treat (DTT) was empirical. In this cross-sectional retrospective study including patients with SARS-CoV-2 infection and a suspicion of CAPA, we studied the concordance between the DTT and the three diagnostic criteria using Cohen’s coefficient, then we identified the factors associated with the DTT and we corrected by treatment to study the influence of the diagnostic criteria on survival. We showed good concordance of DTT and AspICU and ECMM criteria, with “compatible signs”, “positive culture” and “positive galattomannan” influencing the DTT. Treatment also showed a positive effect on survival once corrected for a putative, possible or probable diagnosis of CAPA using AspICU and ECMM criteria. We conclude that EORTC/MSGERC are not considered applicable in clinical practice due to lack of inclusion of signs and symptoms and do not lead to improved survival. AspICU and ECMM criteria showed a good degree of agreement with the DTT and a positive correlation with patient recovery.

Genome-wide association studies (GWAS) have successfully revealed many disease-associated genetic variants. For a case-control study, the adequate power of an association test can be achieved with a large sample size, although genotyping large samples is expensive. A cost‐effective strategy to boost power is to integrate external control samples with publicly available genotyped data. However, the naïve integration of external controls may inflate the type I error rates if ignoring the systematic differences (batch effect) between studies, such as the differences in sequencing platforms, genotype calling procedures, population stratification, and so forth. To account for the batch effect, we propose an approach by integrating External Controls into the Association Test by Regression Calibration (iECAT-RC) in case-control association studies. Extensive simulation studies show that iECAT-RC not only can control type I error rates but also can boost statistical power in all models. We also apply iECAT-RC to the UK Biobank data for M72 Fibroblastic disorders by considering genotype calling as the batch effect. Four SNPs associated with Fibroblastic disorders have been detected by iECAT-RC and the other two comparison methods. However, our method has a higher probability of identifying these significant SNPs in the scenario of an unbalanced case-control association study.

Neonatal diffuse cutaneous mastocytosis (NDCM) is defined as the infiltration of the epidermis by a clonal proliferation of mast cells, observed at birth, without initial signs of systemic involvement. The typical driver mutation is located in the KIT gene. We report a rare case of a boy, born at term, presenting already at birth with generalized subcutaneous nodules, on the face, scalp, trunk, back, hands, and feet. The spleen, liver and inflammatory markers were normal at birth. Tryptase was significantly elevated. Bone marrow biopsy showed no mast cell involvement at age 2 months. A punch biopsy at age 2 months revealed CD117-positive cells diffusely infiltrating the skin, with subsequent DNA NGS sequencing for the formalin fixed paraffin embedded tissue (FFPE) identifying the pathogenic NM_000222.3:c.1504_1509dup; p.(Ala502_Tyr503dup) variant in the KIT gene previously associated with cutaneous mastocytosis. At 2 years follow-up, he had splenomegaly and multiple cervical, and inguinal adenopathy while the skin nodules persisted especially on the scalp with accompanying pruritus. He received oral and local sodium cromoglycate, oral antihistamines, antibiotic cream for skin infection, and iron supplementation, however compliance to treatment was relatively low. The prognosis is difficult to predict, as he developed systemic involvement, failure to thrive and mild psychomotor delay. A case aggregation of NDCM reported in the literature was performed to provide a comprehensive overview of this rare pathology, to better understand the prognosis. NDCM is a life-threatening disease with severe complications. Almost half had severe complications, such as mast hepatosplenomegaly, adenopathy, bacterial infections, mast cell leukaemia, and systemic involvement.

This paper presents a case study on using Emacs and Org-mode for literate programming in undergraduate data science courses. Over three academic terms, the author mandated these tools across courses in R, Python, C++, SQL, and more. Onboarding relied on simplified Emacs tutorials and starter configurations. Students gained proficiency after initial practice. Live coding sessions demonstrated the flexible instruction enabled by literate notebooks. Assignments and projects required documentation alongside functional code. Student feedback showed enthusiasm for learning a versatile IDE, despite some frustration with the learning curve. Skilled students highlighted efficiency gains in a unified environment. However, uneven adoption of documentation practices pointed to a need for better incorporation into grading. Additionally, some students found Emacs unintuitive, desiring more accessible options. This highlights a need to match tools to skills levels, potentially starting novices with graphical IDEs before introducing Emacs. Key takeaways include literate programming aids comprehension but requires rigorous onboarding and reinforcement; Emacs excels for advanced workflows but has a steep initial curve. With proper support, these tools show promise for data science education.

While the debate on the association between Enterobius vermicularis (E. vermicularis) and acute appendicitis has not been settled, a few case reports of this very rare encounter are beginning to come to light. While E. vermicularis is one of the most common parasitic infestations around the world, acute appendicitis, on the other hand, is also a commonly encountered condition in general surgery. However, the association between the two remains controversial. Here we present a case report of a young woman with appendicitis associated with (E. vermicularis).

This paper analyzes the relationship between corporate social responsibility (CSR) and social impact within the oil industry in an emerging market (Peru). Following the emerging literature on the social impact field, and using the case study methodology, the findings show that the expected positive relationship is diverse depending on several factors. Specifically, the results reveal that companies must focus on community and environmental responsibility, together with stakeholders' involvement to achieve social impact. However, when companies are weak in any of the previous factors, then the social impact is only partially accepted or even withdrawn.

This study examines the negative impacts of dark stores on the urban environment from three perspectives: land use, transportation, and streetscape. It is conducted on B-Mart, a representative dark store in South Korea. First, in terms of land use, we find that dark stores that function as logistics facilities conflict with the surrounding land use. Second, by analyzing the location of dark stores and the hourly traffic volume of delivery vehicles, we find that the impact on the surrounding transportation infrastructure and pedestrian traffic is not as significant as previously claimed. However, during the transportation and loading process of the dark store, several problems such as traffic violations, illegal parking, and illegal loading were observed, posing a risk to nearby vehicles and pedestrians. Third, in terms of streetscapes, the location of dark stores on the ground floor of buildings can harm streetscapes. The current urban planning system in South Korea does not clearly define the status and function of dark stores, making it unclear how to manage them. Therefore, it is necessary to clarify their legal definition and introduce urban planning and design guidelines that are consistent with their appropriate location and appearance.

Consumer rhythm-monitoring devices, such as the Apple Watch, are becoming more readily available. Irregular pulses can be detected using an optical sensor built into the wearable device. The Apple Watch (Apple Inc., Cupertino, CA, USA) is a class II medical device with pulse rate and electrocardiography (ECG) monitoring capabilities. Here we report a case in which an arrhythmia that was conventionally perceived but undiagnosed was identified as atrial fibrillation by self-acquisition of ECG data using an Apple Watch.

The problem of filling the bone cavity-forming after tooth extraction remains relevant in maxillo-facial surgery. There is a large selection of osteotropic materials of various natures for filling bone defects. In this article, our experience in the treatment of patients with combined mandible angle fracture and radicular cyst and fractures is introduced. A feature of the treatment is to fill the bone defect with the osteotropic material. Using collagen osteotropic material, possessing osteoconductive property can improve the treatment of patients with mandibular fractures within the dentition. This is due to both the stabilization of the fracture line, a decrease in the likelihood of displacement of fragments along with fixation with devices, and a reduction in the time of bone tissue regeneration, which reduces the rehabilitation period and allows further orthopedic treatment of patients after 4-5 months without additional bone grafting operations.

Background: After allogeneic hematopoietic stem cell transplantation (allo-HSCT), acute leukemia relapse is common, and asymmetric bone marrow recurrence hasn’t been reported. Because the anatomical distribution of acute leukemia clones in the bone marrow after allo-HSCT is presumed to be diffuse, bone marrow aspirations are performed in single site. Case presentation: We identified two acute leukemia patients, whose leukemic burden in bilateral bone marrow specimens differed significantly. The first case was a 20-year-old man who was diagnosed with acute myelomonocytic leukemia and received haploidentical allo-HSCT. He had been in complete remission for two years and off immunosuppressive medications for a year, with normal peripheral blood count. Routine bone marrow biopsy of his left posterior iliac bone marrow showed 52% leukemia blasts, while the right side had 0% blasts ten days later. Due to the discordant results, the patient refused further intervention and died of high leukocyte syndrome four months later. The second case was a 23-year-old woman who was diagnosed with acute B lymphoblastic leukemia and received HLA-identical sibling allo-HSCT. Although 62% of blasts were found in her left iliac marrow on day +122, 0 % of blasts were found on a sample obtained from the right iliac crest on day +128. Whole-body 18F-FDG PET/CT scans confirmed that the leukemic infiltration in her bone marrow was asymmetric. Considering the higher leukemic burden on the left, we chose the left posterior iliac crest aspiration for further response evaluation. After chemotherapy combined with donor lymphocyte infusion, she achieved transient hematologic complete remission. She died of septic shock with heart failure at +258 days after allo-HSCT before infusion of anti-CD19 donor chimeric antigen receptor T cells. Conclusions: To our knowledge, these are the first case reports of asymmetric bone marrow infiltration of blasts in acute leukemia patients after allo-HSCT. Bilateral posterior iliac crest aspirations or 18F-FDG-PET/CT scans may help distinguish such distribution. If discordant bone marrow specimens are observed, physicians should restrict future bone marrow studies to the more involved side.

Unmanned aerial vehicles (UAVs) are one of the most promising innovative technologies invented in recent years to promote precision agriculture and smart farming. UAVs can not only reduce labor requirements but also increase production output, reduce the use of pesticides, and protect the environment. However, previous studies on agricultural UAVs have mostly focused on technical problems such as software and hardware design. Few studies have examined users’ behaviors in the implementation process. On the basis of Orlikowski and Gash’s technological frames, this study explored the participants’ cognition and expectation of farmers, pesticide, sprayers, and agriculture officials, who are three key groups of stakeholders involved in the application of UAVs to pesticide spraying, regarding agricultural UAVs and examined how the conflicts between their cognition and expectation influenced the choice of using pesticide spraying UAVs. The conclusions of this study contributed to supplement the content and broaden the scope of application of technological frame theory and provided a crucial reference for the promotion of agricultural UAVs in practice.

It is well known that fiber sizing is one of the most important component in the manufacturing of composites, and it does affect the mechanical properties including strength and stiffness. In this work, the influence of fiber sizing levels on the mechanical properties of carbon fibers (CF) is reported at room temperature by using single fiber tensile testing (Favimat+), single fiber pullout testing (SFPO), and interfacial elemental analysis using X-ray photoelectron spectroscopy (XPS). Standard modulus of CF (7±0.2 μm in diameter) were sized using two Michelman commercially available sizing formulations. The average solid content for each sizing formulation is 26.3 ± 0.2% and 34.1 ± 0.2%, respectively. HEXION RIMR 135 with curing agent RIMH 137 was used as a model thermoset epoxy matrix during the SFPO measurements. A predictive engineering fiber sizing methodology is also developed. Sizing amounts of 0.5, 1, and 2 wt. % on the surface of the fiber is achieved for both sizing formulations. For each fiber sizing level, 50 single fiber tensile testing experiments and 20 single fiber pull-out tests were conducted. The ultimate tensile strength (σult) of the carbon fibers and the interfacial shear strength (τ_app) of the single fiber composite were analyzed. it is also investigated the effect of the sizing levels on the interfacial shear stress and the O/C (Oxygen/Carbon) surface composition ratio. As a result, generalized fiber sizing and characterization methods were established. The developed methods can be used to characterize the strength and interfacial shear strength of any man-made fibers with different sizing formulations and solid contents, irrespective of the matrix i.e. thermoset or thermoplastic.

Numerous dynamic and complicated processes characterize development from the oocyte to the embryo. However, given the importance of functional transcriptome profiles, long non-coding RNAs, single-nucleotide polymorphisms, and alternative splicing during embryonic development, the effect that these features have on the blastomeres of 2-, 4-, 8-, 16-cell, and morula stages of development have not been studied. Here, we conducted a scRNA-seq survey of cells from sheep from the oocyte to the blastocyst developmental stages. We then carried out experiments to identify and functionally analyze the transcriptome profiles, long non-coding RNAs, single-nucleotide polymorphisms (SNPs), and alternative splicing (AS). We founded that between the oocyte and zygote groups significantly down-regulated genes and the second-largest change in gene expression occurred between the 8- and 16-cell stages. We used various methods to construct a profile to characterize cellular and molecular features and systematically analyze the related GO and KEGG profile of cells of all stages from the oocyte to the blastocyst. This large-scale, single-cell atlas provides key cellular information and will likely assist clinical studies in improving preimplantation genetic diagnosis.

Introduction: The association of gene variants for interleukin 6(IL-6) (rs1800796), interleukin 10 (IL-10) (rs1800896) and tumor necrosis factorα (TNFα (rs1800629) with the occurrence of spontaneous preterm birth (PTB) was investigated to determine whether these genetic variants are a risk factor. Materials and methods: 199 blood samples from pregnant women who had given birth prematurely and 200 control blood samples were analyzed to determine single nucleotide polymor-phisms (SNPs) of genes for IL-6 (rs1800796), IL-10 (rs1800896) and TNFα (rs1800629). The control samples were samples from pregnant women with term delivery. Isolation of DNA was per-formed on mini-spin columns according to the manufacturer's protocol. The quality and purity of the isolated DNA were tested using a Qubit 3 fluorometer. Genotyping was performed with an ABI PRISM 7500 SDS using TaqMan SNP genotyping assays. The genotypes obtained were an-alyzed using the 7500 Software v2.3 package. Results: Carriers of the A/A genotype for the rs1800629 of the TNFα gene have 4.81 times greater chance of late-onset PTB compared to carriers of the G/G and A/G genotypes in the recessive inheritance model. The presence of the G/G genotype in the recessive inheritance model compared with the G/A and A/A genotypes for the rs1800896 of the IL-10 gene represents a potentially protective factor, with mothers in the term-birth group having an almost 2-fold lower odds of PTB in general and an almost 10-fold lower odds of early PTB. On the other hand, carriers of the A/G genotype of rs1800896 have a 1.54-fold higher chance of preterm birth in general and a 1.6-fold higher chance of late preterm birth in the super dominant inheritance model compared to the A/A and G/G genotypes in the group of mothers with PTB. In this study, no association was found between PTB and rs1800796 of the IL-6 gene. Conclusion: rs1800629 in mothers was associated with PTB. rs1800896 shows a potentially protective effect for the occurrence of PTB in this study. No association was found between PTB and rs1800796.

Effectively addressing juvenile delinquency among adolescents in Nigeria necessitates a keen focus on parenting styles and family structures. Given that parents serve as primary custodians and paramount influencers in socializing their children, their pivotal roles cannot be understated. When parents conscientiously strive to exemplify positive role models for their children, the likelihood of yielding optimal and desired outcomes is significantly enhanced. Regrettably, a considerable number of parents have embraced parenting styles that inadvertently expose their children to various forms of juvenile delinquency. The article explores the complex relationship between parenting styles and juvenile delinquency, shedding light on the connections between family structure and delinquent behavior. Also, the connection between marital discord and juvenile delinquency as well as the impacts of single parenting, were explored. The theoretical framework employed in this article is the Social Learning Theory, formulated by Albert Bandura in 1977. The article underlines that a substantial portion of delinquent acts among adolescents can be attributed to familial discord and the specific parenting styles employed. Consequently, this study advocates for a paradigm shift towards more effective and constructive parenting styles. Additionally, it emphasizes the imperative for the government and relevant institutions to accord due importance to the institution of the family in their policies and interventions.

We are currently investigating the ultrasound imaging of a sensor consisting of a randomized encoding mask attached to a single lead zirconate titanate (PZT) oscillator for use in a puncture microscope. The proposed model was performed using a finite element method (FEM) simulator. To increase the number of measurements required by a single element system, the transducer was rotated at different angles. The image was constructed by solving a linear equation of the image model. In a previous study, the image resolution was improved by extracting phase information. In this study, we propose a strategy by integrating the weighted frequency subbands compound and a super resolution method (SCM) to improve the resolution in range and lateral resolution. We also evaluated the image performance by applying different methods to improve the image quality. The results show that better image resolution and speckle suppression were obtained by applying the proposed method.

Although hundreds of keV in energy gain have already been demonstrated in dielectric laser accelerators (DLAs), there remains challenge in creating structures that can confine electrons for multiple millimeters. We focus here on dual gratings with single sided drive, which have experimentally demonstrated energy modulation numerous times. Using a FTDT simulation to find the fields within various DLA structures and correlating these results with particle tracking simulation, we look at the impact of teeth height and width, as well as gap and offset, on the performance of these structures. We find a tradeoff between electron throughput and acceleration, but that for any given grating geometry there is a gap and offset that will allow some charge acceleration. For our 780 nm laser wavelength, this results in a 1200 nm optimal gap size for most gratings.

Single image deraining (SID) has shown its importance in many advanced computer vision tasks. Though many CNN based image deraining methods have been proposed, how to effectively remove raindrops while maintaining background structure remains a challenge that needs to be overcome. Most of the deraining work focuses on removing rain streaks, but in heavy rain images, the dense accumulation of rainwater or the rain curtain effect significantly interferes with the effective removal of rain streaks, and often introduces some artifacts that make the scene more blurry. In this paper, we propose a new network structure R-PReNet for single image deraining with good background structure maintaining. This framework fully utilizes the cyclic recursive structure of PReNet. Moreover, we introduce residual channel prior (RCP) and feature fusion modules for better deraining performance by focusing on background feature information. Compared with the previous methods, our method has significantly improvement effect on the rainstorm image with the artifacts removing and good visual detail restoring.

A multispectral superconducting nanowire single photon detector sensitive to different incident photon wavelength bands, is proposed. The SNSPD consists of a Distributed Bragg Reflector, a gold mirror, and two regions employing four NbN nanowires. Using the DBR both as a filter and a reflector, two distinct detection bands are created. The first detection band has a peak absorbance of > 0.75 at a wavelength of 1143 nm, while the second band has an absorbance of > 0.70 in the wavelength range 1440 to 2000 nm. The design of the device can be tuned to provide sensitivity in different wavelength bands. While SNSPDs do not typically provide photon wavelength sensitivity, the band-selection design proposed in this work opens up potential applications for future quantum communication technology.

GDF5 gene is involved in the development of skeletal elements, synovial joint formation, tendons, ligaments, and cartilage. Several polymorphisms are present within the gene and two of them, rs143384 and 143383, have been reported as correlated with osteoarticular disease or muscle flexibility. The aim of this research is to verify if the worldwide distribution among human populations of rs143384 polymorphism has been shaped by selective pressure, or if it’s the result of random genetic drift events. Ninety-four individuals of both sexes, 18-28 years old, from Sardinia were analyzed. We observed the following genotype frequencies: 28.72% of homozygotes AA, 13.83% of homozygotes GG, and 57.45% of heterozygotes AG. Allele frequencies were 0.574 for allele A and 0.426 for alle G. Relationships between populations were verified by Multidimensional Scaling (MDS). Our data show: i) a clear heterogeneity within the African populations; ii) a strong differentiation between Africans and the other populations: iii) the Sardinian population is placed withing the European cluster. To reveal possible traces of selective pressure, Population Branch Statistic (PBS) was calculated; both SNPs rs143384 and 143383 have low PBS values, suggesting that there are no signals of selective pressure in those areas of the gene.

The use of fiber optics as a tool for different kinds of geotechnical monitoring can become highly attractive and cost effective when compared to conventional instruments such as piezometers, inclinometers, among others. A single fiber optic cable may cover a larger monitoring area compared to conventional instrumentation, and the possibility of monitoring more than one physical quantity with the same fiber optic cable. Consulting the literature, it is possible to find several different examples where distributed fiber optic systems are being used. For the use of any sensor, a calibration curve is required. In the case of strain sensors, calibration is required to derive strain values from the frequency measurement quantity. However, fiber optic sensor cable manufacturers often do not provide their own calibration parameters and consult the values in specialized literature, which can result in monitoring errors. In this context, this article presents a bench adjusted for tests on single mode fiber optic cables, as well as results of tensile tests aimed at defining the function of strain variations of two different optical fiber cables, manufactured by different companies, using two different distributed interrogators. This paper also proposes a methodology for calibrating of the fiber optic cables deformation since the calibration parameters are provided by the cable manufacturers, which can result in errors depending on the application. It should be noted that there are few manufacturers of fiber optic cables aimed at application in civil engineering. Therefore, with the calibration methodology proposed in this paper, it is intended to transmit to the academic community the possibility of obtaining calibration parameters of any fiber optic cable, even those manufactured for telecommunications purposes and not only for cables manufactured with the intended use in civil engineering. Because of this fact, researchers will not be restricted to the acquisition of special cables for their applications. Based on the results, it was possible to conclude that the application of calibrated fiber optic sensors in experimental piles foundations is viable, in order to evaluate the load-displacement behavior of these elements, under different loading conditions.

A single fracture is the basic unit of fracture medium, and the roughness of fracture wall surface is an important factor influencing hydraulic characteristics of the flow in bedrock fracture. However, effects of the shape and density of roughness elements (various bulges/pits on rough fracture wall surfaces) on water flow in a single rough fracture have not been thoroughly discovered. Thus the water flow in single fracture with different shapes and densities of roughness elements was simulated by using Fluent software in this study. The results show that in wider fractures the flow rate mainly depends on fracture aperture, while in narrow and close fracture medium the surface roughness of fracture wall is the main factor of head loss of seepage; there is a negative power exponential relation between the hydraulic gradient index and the average fracture aperture, i.e. with the increase of fracture aperture, the relative roughness of fracture and the influence weight of hydraulic gradient both decrease; and in symmetrical-uncoupled fractures there is a super-cubic relation between the discharge per unit width and average aperture. Above results would help to deepen the understanding of rough fracture seepage.

Microfluidic devices have been extensively investigated in recent years in fields including ligand-binding analysis, chromatographic separation, molecular dynamics, and DNA sequencing. To prolong the observation of a single molecule in aqueous buffer, the solution in a sub-micron scale channel is driven by the electric field and reversed after a fixed delay following each passage, so that the molecule passes back and forth through the laser focus and the time before irreversible photobleaching is extended. However, this practice requires complex chemical treatment to the inner surface of the channel to prevent unexpected sticking to the surface and the confined space renders features, such as a higher viscosity and lower dielectric constant, which slow the Brownian motion of the molecule compared to the bulk liquid. In this paper, we have fixed a capillary microchannel with an inner diameter of 2 microns on top of a piezo stage to recycle the molecule and collected the fluorescence by a confocal microscope. The passing times of the molecule through the laser focus are calculated by a real-time control system based on an FPGA and the commands of translation are given to the piezo stage through a feedback algorithm. We have achieved a maximum number of recycles of more than 200 and developed a maximum-likelihood estimation of the diffusivity of the molecule, which attains results of the same magnitude as previous reports. This technique simplifies the overall procedure of the single-molecule recycling and could be useful for the ligand-binding studies of biomolecules.

Reverse water gas shift reaction (RWGS) is an important process which plays a vital role in many CO2 utilization related reactions. Noble metals are the most active catalysts in RWGS, but the high price and low reserve strangled their applications. In the present work, we reported a non-transition-metal MgAl2O4 catalyst which showed outstanding activity and stability at high temperatures in the RWGS reaction and improved performance after doping of single atomic Nin+. The catalyst can obtain 46% of CO2 conversion in durability test of 75 h at 800 °C under high weight hourly space velocities (225 000 ml g-1 h-1). The adsorption sites, possible reaction route, and effects of Nin+ single atoms on the (111) surface of MgAl2O4 for RWGS were investigated by in situ DRIFTS and DFT calculations. The results indicated that the rate determining reaction step of RWGS on MgAl2O4 and Ni (SA)/MgAl2O4 were both the reaction of OH* + H* → H2O* + *, but the energy barrier was significantly reduced after introducing single atomic Nin+. Nin+ atoms can increase the hydroxyl coverage on the surface of catalyst and Al3+ sites near the Nin+ ion are considered as the predominant active sites for RWGS reactions.

Light trapping in single nanowires (NWs) are of vital importance for photovoltaic applications. However, circular NWs (CNWs) can limit its light-trapping ability due to high geometrical symmetry. In this work, we present a detailed study of light trapping in single NWs with an elliptical cross-section (ENWs). We demonstrate that the ENWs exhibit significantly enhanced light trapping compared with the CNWs, which can be ascribed to the symmetry-broken structure that can orthogonalize the direction of light illumination and the leaky mode resonances (LMRs). That is, the elliptical cross-section can simultaneously increase the light path length by increasing the vertical axis and reshape the LMR modes by decreasing the horizontal axis. We found that the light absorption can be engineered via tuning the horizontal and vertical axes, the photocurrent is significantly enhanced by 374.0% (150.3%, 74.1%) or 146.1% (61.0%, 35.3%) in comparison with that of the CNWs with the same diameter as the horizontal axis of 100 (200, 400) nm or the vertical axis of 1000 nm, respectively. This work advances our understanding of how to improve light trapping based on the symmetry breaking from the CNWs to ENWs and provides a rational way for designing high-efficiency single or self-assembled NW photovoltaic devices.

HIV-1 assembly is a complex mechanism taking place at the plasma membrane of the host cell. It requires nice spatial and temporal coordination to end up with a full immature virus. Researchers have extensively studied HIV-1 assembly molecular mechanism during the past decades, in order to dissect the respective roles of viral proteins, viral genome and host cell factors. Nevertheless, the time course of the process has been observed in living cells only a decade ago. The very recent revolution of optical microscopy, combining high speed and high spatial resolution now permit to study assemblies and their consequences at the single molecule level within (living) cells. In this review, after a short description of these new approaches, we will show how HIV-1 assembly in cells has been revisited using these advanced super resolution microscopy techniques and how much it could make a bridge in studying assembly from the single molecule to the host cell.

Optical tweezers offer a non-contact method for selecting single cells and translocating them from one microenvironment to another. We have characterized the optical tweezing of yeast S. cerevisiae and can manipulate single cells at velocities up to 0.77 mm/s using laser powers of 40 mW from a 785 nm diode laser. We have fabricated and tested three cell isolation devices; a micropipette, a PDMS chip and laser machined fused silica chip and we have isolated single bacteria, yeast and cyanobacteria cells. The most effective isolation was achieved in PDMS chip, where single yeast cells were grown and observed for 18 hours without contamination. The duration of budding in S. cerevisiae was not affected by the laser parameters used, but the time from tweezing until the first budding event began increased with increase laser energy (laser power x time). Cells tweezed using 25 mW for 1 minute were viable after isolation. We have constructed a micro-consortium of yeast cells, and a co-culture of yeast and bacteria, using optical tweezers in combination with the PDMS network of channels and isolation chambers, which may impact on both industrial biotechnology and understanding pathogen dynamics.

We conducted an in-situ crystal structure analysis of ferroselite at non-ambient conditions. The aim is to provide a solid ground to further the understanding of the properties of this material in a broad range of conditions. Ferroselite, marcasite-type FeSe2, was studied under high pressures up to 46 GPa and low temperatures, down to 50 K using single-crystal microdiffraction techniques. High pressure and low temperatures were generated using a diamond anvil cell and a cryostat. We found no evidences of structural instability in the explored P-T space. The deformation of the orthorhombic lattice is slightly anisotropic. As expected, the compressibility of the Se-Se dumbbell, the longer bond in the structure, is larger than that of the Fe-Se bonds. Less obvious is the behavior of the octahedral bonds, the shorter bond is the most compressible determining a small increase in the octahedron distortion with pressure. We also achieved a robust structural analysis of ferroselite at low temperature in the diamond anvil cell. Structural changes upon temperature decrease are small but qualitatively similar to those produced by pressure.

Layered superconductors are attractive because some of them show high critical temperatures. While their crystal structures are similar, those compounds are composed of many elements. Compounds with many elements tend to be incongruent melting compounds, thus, their single crystals cannot be grown via the melt-solidification process. Hence, these single crystals have to be grown below the decomposition temperature, and then the flux method, a very powerful tool for the growth of these single crystals with incongruent melting compounds, is used. This review shows the flux method for single-crystal growth technique by self-flux, chloride-based flux, and HPHT (high-pressure and high-temperature) flux method for many-layered superconductors: high-T_c cuprate, Fe-based and BiS₂-based compounds.

About half of the world's population is at risk of dengue infection. Epidemics of dengue fever caused an increased risk of morbidity and mortality in recent years, which led to the exploration of vaccines as a preventive measure. This systematic review and meta-analysis aimed to evaluate the efficacy, immune response, and safety of dengue vaccines in children by analyzing clinical trials. The review followed standard procedures for data extraction using PRISMA guidelines, and searching multiple databases including PubMed, CINAHL, Medline, Health Source, Science Direct, and Academic Search Premiere. Eligible studies involved children (0-17 years). Cochrane Collaboration criteria were used for quality assessment, with thematic data synthesis and meta-analysis. Among 38 selected studies, dengue vaccines showed varying efficacy against all four serotypes. CYD-TDV (Dengvaxia®), and Tekade (TAK-003) vaccines demonstrated strong protection against severe dengue, but their long-term efficacy varied. Vaccines triggered satisfactory immune responses, notably in those previously exposed to dengue. Safety profiles were mostly favorable, noting mild adverse events post-vaccination. Meta-analysis supported vaccine efficacy and immune response, but safety concerns warrant further exploration. In conclusion, dengue vaccines demonstrated promising efficacy and immune response, particularly against severe manifestations.

The coordination of policy, makers and materials is critical to the success of circular city development. The network of maker activities in the city of Leuven is a flagship initiative that illustrates the mechanisms that support integrated circular urban production. This paper draws on the Pop-Machina project, funded by EC Horizon 2020, which identifies the links between the maker movement and the circular economy in seven European cities. The case study project in Leuven, confirmed as the most impactful amongst those studied in the Pop-Machina project, is examined to assess how local knowledge and policy measures, can provide a means of activating a circular maker ecology. Through desk research, spatial urban analysis and interviews with key stakeholders, this paper provides a critical narrative of the development, success factors and hurdles related to circular making processes in the city. It demonstrates how hybrid makers are supported by local, national, and international policy on the one hand, and by integration with the city’s community, educational and business groups on the other. It is this constellation of social, political, and spatial conditions that lies at the success of the project.

Purpose: The rapid development of technological innovations is causing major transformations in organisations. These changes are facilitating the transition of organisations from traditional to digital cultures and are influencing the positioning and even the survival of many of them. Higher Education Institutions are no exception. This article aims to understand the main factors that facilitate and drive this transformation from the point of view of their external stakeholders. Design/methodology/approach - Due to the complexity of the study, the case study method has been used as an appropriate methodology. Findings - As the results of the study show, the use of new agile methodologies, the development of continuous improvement processes, the automation of tasks with the use of new technologies, data-driven decision making, and the management of new digital talent are enablers. Research limitations/implications - Further research could conduct similar analyses with other stakeholders, to achieve a complete management model. Practical implications - The case study allows researchers to learn from practitioners and business leaders, while providing a theoretical model that can help other managers in the process of transforming their organisations. Originality/value - The main contribution of this study has been to apply the study to a specific Higher Education Institution.

To the best of the author’s knowledge, studies of mature plasmacytoid dendritic cell proliferation associated with T lymphoblastic lymphoma were extremely rare in the literature. Here, we report a patient who underwent both mature plasmacytoid dendritic cell proliferation and T lymphoblastic lymphoma. With the findings of lymph node biopsy taken from the right cervical and inguinal regions, we identified eye-catching mature plasmacytoid dendritic cells that were considered to be responsible for this lesion at the beginning, until the immunostaining of Ki67 and TDT showed a small group of positive cells hiding in these plasmacytoid dendritic cells. Bone marrow biopsy was also performed in this patient. Microscopically, the hematopoietic tissue was almost completely replaced by lymphoblastoid cells with condensed chromatin, inconspicuous nucleoli and scanty cytoplasm, which were basically the same as those seen in the lymph nodes in morphology. However, there was no sign of plasmacytoid dendritic cells or Langerhans cells in the bone marrow biopsy. With the help of bone marrow biopsy, our final diagnosis of the lymph node was T lymphoblastic lymphoma coexisting with mature plasmacytoid dendritic cell proliferation . Although accumulations of plasmacytoid dendritic cells may occur in some infections or reactive lymphadenopathy, the presence of extensive nodules or infiltration of plasmacytoid dendritic cells strongly reminds the pathologist to carefully evaluate the bone marrow or peripheral blood status of the patient to exclude a hidden myeloid or other neoplasm.

Atopic dermatitis (AD) is a chronic skin disease marked by inflammation, erythema, dryness and pruritic lesions. Due to the intermittent nature of the disease, management strategies for AD focus on flare prevention following remission. A 24-year-old patient with mild-to-moderate AD lesions, previously non-responsive to topical corticosteroids (TCS), was treated with pimecrolimus for 12 days and emollient plus cream (EC) every day. After the initial 12-day treatment course, the patient was advised to use pimecrolimus if his symptoms reoccured. AD symptoms improved substantially between Weeks 0 and 12 with daily use of EC. However, by Week 12, his symptoms had relapsed, necessitating retreatment with pimecrolimus. Overall, the patient experienced flare-free periods between Weeks 3 and 12 and between Weeks 13 and 16. No tolerability issues were reported. This case report demonstrates the use of a complementary approach of daily administration of maintenance EC and intermittent application of pimecrolimus for flare management, which was effective for treating a patient with mild-to-moderate AD resistant to TCS.

Background: Since the previous study dealing with the case fatality ratio and infection fatality ratio caused by COVID-19, the author has received many comments that prompted the question: "Why did an optimistic prognosis fail?" To answer this question, a more detailed and expanded analysis was carried out in a new study. Objective: To evaluate the dynamics of monthly numbers of cases, deaths, tests and CFR worldwide during three phases of the COVID-19 pandemic. Material and Methods: Twenty three sets of databases, dated the 22nd of each month from January 2020 to November 2021, for 213 countries were collected from the Worldometer website. The number of cases, deaths, tests, CFR, IFR, etc. were counted for various periods of time for each of the 213 countries, then results related to different periods of time were compared. Results: The analysis of the main epidemiological parameters led to the division of three phases of the global pandemic evolution. The first phase (23.01.20-22.07.20), the second phase (23.07.20-22.01.21) and the third phase (23.01.21-22.07.21) were different in terms of the number of tests performed, new cases, and mortality due to COVID-19. By the end of the second phase, the worldwide statistics indicated the imminent end of the pandemic, but the third phase was characterized by a sudden rise in the number of new cases and deaths that could not be explained rationally. The most dramatic evolution of the epidemic curve occurred in the countries where doctors had successfully battled COVID-19 during the first two phases of the pandemic. Conclusions: Despite the decrease in overall death numbers during the latest months analyzed, additional study is necessary to identify the cause for the increase in the number of new cases and deaths during the third phase of the pandemic. Only complete information regarding the positive and negative impact of medical and non-medical methods of diagnostics and prophylaxis of COVID-19 can help to organize effective measures to end the current pandemic and prevent a similar one from occurring in the future. Presumably, there are several causes of the negative evolution of the current pandemic, including the overreliance on PCR tests, application of non-specialized premises for quarantine and treatment, decrease in herd and individual immunity, inadequate change of therapeutic protocols, and ignoring prophylactic treatment. It can be suggested that the use of immunemodulatory drugs, for example, thymus extract or thymic peptides, in groups of people with compromised immunity is necessary, and prophylactic and therapeutic protocols should be changed from the 'standard' types to 'personalized' ones.

This article investigates the prospect of implementing multidisciplinary and multicultural student teamwork (MMT) involving Case-based Learning (CBL) and Problem-based Learning (PBL) as a sustainable teaching practice. Based on a mixed methods approach, which includes direct observation (both physical and virtual), questionnaire distribution and focus-group interviews the study reveals that MMT through CBL and PBL can both facilitate and hinder sustainable learning. Our findings show that while MMT enhances knowledge sharing, it also poses a wide range of challenges, raising questions about its social significance as a sustainable teaching practice. The study suggests the implementation of certain mechanisms, such as ‘Teamwork Training’ and ‘Pedagogical Mentors’, aiming to strengthen the sustainable orientation of MMT through CBL and PBL.

Introduction: Valproic acid (VPA) is an antiepileptic drug extensively used for treating partial and generalised seizures, acute mania and as prophylaxis for bipolar disorder. Drug-induced liver injury (DILI) persists as a significant issue related to fatal outcomes by VPA. The aim of this study was to increase our knowledge about this condition and to better identify patients affected. Methods: We conducted an observational retrospective case-control study that identified cases of DILI by VPA from the Pharmacovigilance Programme from our Laboratory Signals at La Paz University Hospital from January 2007 to December 2019. From the Therapeutic VPA Monitoring Programme, two control groups were assigned, VPA-tolerant patients and the other with patients who developed mild VPA-related hepatitis but who did not meet the DILI criteria, matched for date, age and sex. Results: A total of 60 patients were included in the study: 15 cases of DILI, 30 VPA-tolerant controls and 15 controls with mild hepatitis. Mean age for the cases was 45.7 years, 4(26.7%) were women and 5(33.34%) were children under 18 years, of them 3(20%) were fatal. Polytherapy with other antiepileptic drugs (p=0.047) and alcohol consumption (p<0.001) were associated with a greater risk of developing DILI by VPA. A diagnosis of epileptic seizure was more frequently related to DILI when compared with the VPA-tolerant controls (p<0.001). The cases developed hepatocellular hepatitis (p<0.001), while the mild hepatitis controls had a higher rate of cholestatic hepatitis (p<0.001). The laboratory lactate dehydrogenase values were statistically higher (even at baseline) in patients with DILI than in both control groups (p= 0.033 and p=0.039). Conclusions: VPA hepatotoxicity remains a considerable problem. This study offers interesting findings for characterising VPA-induced liver injury and at-risk patients.

Background. Neoplastic diseases and infections have become the leading causes of death in SLE in recent decades. Cancers and infections were also precipitating factors in the development of catastrophic APS. Case summary. We describe two patients: one of them had definite antiphospholipid syndrome (APS) and melanoma and the other had definite systemic lupus erythematosus (SLE) with APS, melanoma, infiltrative tuberculosis and severe Herpes Zoster (HZ). Management of patients with SLE concurrent with APS is a rather difficult task in rheumatology practice. In addition to kidney damage and cardiovascular disease, infections and malignancies are a significant cause of death in this cohort. The risk of malignancy in SLE is of considerable interest, since the immune and genetic pathways underlying the pathogenesis of this disease, as well as the immunosuppressive therapy, can significantly alter the risk. Both patients still had reliable APS, confirmed by triple-positive aPL. Both were at high risk of thrombosis. Patients ' adherence to treatment with direct oral anticoagulants and relapse of thrombosis on the background of rivaroxaban were noted. Conclusion. The cases where cancer or tuberculosis develops in the presence of rheumatic diseases are not so common and complicate the possibilities of therapeutic approaches, limiting the use of drugs that are not regulated by clinical recommendations.

(1) Background: It is unclear whether the reported presenting clinical features of coronavirus disease 2019 (COVID-19) are useful in identifying high-risk patients for early testing and isolation in the emergency department (ED). We aimed to compare the exposure history, clinical, laboratory, and radiographic features of ED patients who tested positive and negative for COVID-19; (2) Methods: We conducted a case-control study in seven EDs during the first five weeks of the COVID-19 outbreak in Hong Kong. Thirty-seven laboratory-confirmed COVID-19 patients were compared with 111 age- and gender-matched controls; (3) Results: There were no significant differences in patient characteristics and reported symptoms between the groups, except patient-reported fever. A positive travel history or contact history was the most significant predictor for COVID-19 infection. After adjustment for age and presumed location of acquiring the infection in Wuhan/Hubei, patient-reported fever (OR 2.6, 95% CI 1.1 to 6.3), delayed presentation (OR 5.0, 95% CI 2.0 to 12.5), having medical consultation before ED presentation (OR 7.4, 95% 2.9 to19.1), thrombocytopenia (OR 4.0, 95% CI 1.6 to 9.7), raised lactate dehydrogenase (OR 5.9, 95% CI 1.9 to 18.5), haziness, consolidation or ground-glass opacity on chest radiography (OR 5.6, 95% CI 2.0 to 16.0), and bilateral changes on chest radiography (OR 13.2, 95% CI 4.7 to 37.4) were associated with a higher odds of COVID-19 separately while neutrophilia was associated with a lower odds (OR 0.3, 95% CI 0.1-0.8); and (4) Conclusions: This study highlights several features that may be useful in identifying high-risk patients for early testing and isolation while waiting for test result. Further studies are warranted to verify the findings.

Objectives: COVID-19, a respiratory disease caused by SARS-COV2 and transmitted from person-to-person through viral droplets remains a global pandemic. There is a need to understand the transmission modes, populations at risk, and how to mitigate the spread and case fatality in the United States (US) and globally. The current study aimed to assess the global COVID-19 transmission and case fatality, examine similar parameters by countries and determine evidence-based practice in extreme epidemiology response in epidemic curve flattening and case fatality reduction. Methods: A cross-sectional ecologic design was used to assess the preexisting data on confirmed COVID-19 cases and mortality in March 2020 from the CDC, WHO, Worldodomter, and STATISTA. A rapid assessment between March 23^rd and 31^st, 2020, was utilized for the extreme epidemiology response. The case fatality, termed fatality proportion, was examined using mortality in relation to confirmed cases involving the world, United States of America (USA), United Kingdom (UK), Italy, France, Spain, China, Germany, India and South Korea. Results: The COVID-19 is a global pandemic, with the US as the epicenter for transmission, representing 20.9% of all confirmed cases worldwide, while Italy is the epicenter for case fatality, 30.6% of mortality as at 03/31/ 2020. The fatality proportion (FP) in Italy was 11.4%, Spain (8.8%), France (6.8%) and UK (6.4%). Despite the increased number of confirmed cases, the lowest FP was observed in Germany (0.96%) and South Korea (1.66%). There is increasing linear tends in transmission in the US, R²=0.97 as well as positive daily percentage change, ranging from 1.27% to 20.5%. Conclusions: The USA remains the epicenter for COVID-19 transmission, while Italy is the epicenter for case fatality. The observed relatively low case fatality in Germany and South Korea is due to an “extreme epidemiology” response through the application of Wuhan, China’s early data on COVID-19 transmission control measures and optimized patient care. These data are suggestive of relaxing the clinical guidelines in the United States in COVID-19 testing, application of contact tracing and testing, case isolation and most importantly enhancing resources for case management and social and physical distancing globally, hence epidemic curve flattening and case fatality reduction.

Social media has become part and parcel of the world of today. These days, it’s still the most talked about thing. It cannot be overlooked because it plays a key role in our business functions such as marketing and advertising. Social Media is all about collaboration on files, ideas and projects that help users and stakeholders to successfully complete the project. It influences how people communicate, develop relationship, build trust, increase transparency and provide cultural context. The fundamental aim of this research is to investigate the capacity for project management in social media. This paper explains how social media is used for project management knowledge areas and process groups. Also this research aims to identify SM tools that can be suitable for project management processes. Two studies Delphi Study of three rounds and structured case study interview are used to investigate the impact on the performance of the project team and process robustness. These studies support social media use by accessing the contribution to relationship building, trusts, coordination and cohesion.

Efficient resource allocation is crucial in clusters with frugal Single-Board Computers (SBCs) possessing limited computational resources. These clusters are increasingly being deployed in edge computing environments in resource-constrained settings where energy efficiency and cost-effectiveness are paramount. A major challenge in Hadoop YARN scheduling is load-balancing, as frugal nodes within the cluster can become overwhelmed, resulting in degraded performance and frequent occurrences of out-of-memory errors, ultimately leading to job failures. In this study, we introduce an Adaptive Multi-criteria Selection for Efficient Resource Allocation (AMS-ERA) in Frugal Heterogeneous Hadoop Clusters. Our criterion considers CPU, memory and disk requirements for jobs and aligns the requirements with available resources in the cluster for optimal resource allocation. To validate our approach, we deploy a heterogeneous SBC-based cluster consisting of 11 SBC nodes and conduct several experiments to evaluate the performance using Hadoop wordcount and terasort benchmark for various workload settings. The results are compared to the Hadoop-Fair, FOG and IDaPS scheduling strategies. Our results demonstrate a significant improvement in performance with the proposed AMS-ERA, reducing execution time by 27.2%, 17.4% and 7.6% respectively using terasort and wordcount benchmarks.

The article proposes a mathematical model for creating playlists based on the emotional utility of the consumer, aiming to maintain high user interest in music streaming platforms (Lugos Abarca, 2024). The proposed method follows these steps: first, it calculates the MEEPE of Songs on the digital platform; subsequently, it quantitatively defines the Consumer's MEEPI before exposure to music; then, it operates the MEEPE of the Songs with the consumer's initial MEEPI using the known resolution process (Lugos Abarca, 2023); finally, it employs an emotional utility function to determine possible levels of emotional satisfaction and establish the playback order. This results in the creation of an efficient theoretical model. It is recommended to expand the computational study of the model in future research by using a broader set of songs and considering various initial MEEPI of the consumer. The article's originality lies in its ability to predict, quantitatively and theoretically, the level of satisfaction a music consumer could experience when listening to a playlist.

The objective of this research is to propose a utility function that calculates the possible level of satisfaction that a music consumer would achieve after listening to a song according to the emotional response obtained from a song. Assuming that the consumer's musical preferences are satisfied if the predominant emotions of his current emotional state increase; the probabilistic emotional-musical model (Lugos Abarca, 2023) is used to construct such a utility function. By posing a hypothetical scenario, realistic results were obtained, which guarantee, in principle, its use in theoretical practice. The originality of this research lies in proposing a mathematical tool to study, quantitatively, the decision making of a musical consumer influenced by his emotions. The main conclusion being its importance in the music industry, since the function could predict, theoretically, whether a song will be accepted or rejected by the consumer in comparison with the competition.

During the last few years, advancement in the area of biochemistry, science of the material world, engineering and computer-aided testing has directed towards advancement of high-throughput tools for the sake of profiling information encoded in a gene. Single-cell RNA-sequencing (scRNA-seq) tools capable to examine the sequence data from each individual cells and it shows within population variety and permit exploring of cell conditions and transformation by extreme resolution, possibly give out cell sub-types or gene expression fluctuations that are shaded in mass sequencing processes, which shows population-averaged evaluations. Yet, the major disadvantage for this tool is the lack of success to pick out location related details of the RNA transcriptome, as this needs tissue detachment and cell isolation. Location based transcript determination is among the advancements in the area of medical biotechnology as this can find out the molecules like RNA dataset in their intact physical placement in tissue segment with spatial context at the scale of a single-cell, which is very advantageous as compare to single-cell sequencing techniques. These approaches give key observation in the areas of biomedical field sub-disciplines like neurology, embryology, carcinoma study, immune cell investigation and histological activities. Generally, this review mainly focused towards single-cell sequencing methods, technology development, its challenges observed, different expression data analysis mechanisms and their applications in different areas, such as in cancer research, microbes, central nervous system, sex organs and immune-biology, intensifying the essentiality of sequencing tools at single-cell level for the characterization of extremely dynamic individual cells.

A microfinance scheme has emerged as a crucial tool in reducing poverty gaps in many developing countries. A notable player in the arena is Amanah Ikhtiar Malaysia (AIM), a pioneer in microfinancing in Malaysia since 1987. AIM’s microfinance program injects small-scale businesses, particularly benefiting single mother entrepreneurs, contributing to capacity-building and empowerment. However, the advent of the COVID-19 pandemic, coupled with Movement Control Order (MCO), has adversely affected various business sectors and vulnerable groups, including single mothers engaged in microfinancing enterprises. This study employs primary data to assess the impact of AIM’s microfinancing programs on single-mother entrepreneurs during the crisis. Utilizing a quantitative approach with a two-stage sampling process involving 422 respondents in urban areas, the research evaluates the relationship between empowerment indicators (economic, social, digital, and psychological) and management and governance aspects of program effectiveness. The findings reveal that the microfinancing program’s overall effectiveness, economic, digital and psychological empowerment indicators, and program management are at a moderate level, while social empowerment is high. Economic and digital empowerment, along with effective management, positively and significantly influence program effectiveness, whereas social empowerment has a negative and significant impact. The study concludes with recommendations for enhancing AIM’s microfinance program, equipping single mother entrepreneurs to better navigate future challenges, and informing policy formulation related to their empowerment.

Electrocatalytic and photocatalytic hydrogen evolution reaction (HER) provides a promising approach to clean energy generation. Bimetallic single-atom catalysts raised and have been explored to be advanced catalysts for HER. It is urgent to review and summarize the recent advances in developing bimetallic single-atom HER catalysts. Firstly, the fundamentals of bimetallic single-atom catalysts are presented, highlighting their unique configuration of two isolated metal atoms on supports and resultant synergistic effects. Secondly, recent advances in bimetallic single-atom catalysts for electrocatalytic HER under acidic/alkaline conditions are then reviewed, including W-Mo, Ru-Bi, Ni-Fe, Co-Ag, and other dual-atom systems on graphene and transition metal dichalcogenides (TMDs) with enhanced HER activity versus monometallic analogs due to geometric and electronic synergies. Then, Photocatalytic bimetallic single-atom catalysts on semiconducting carbon nitrides for solar H2 production are also discussed. Finally, an outlook is provided on opportunities and challenges in precisely controlling bimetallic single-atom catalyst synthesis and gaining in-depth mechanistic insights into bimetallic interactions.

Purpose: Therapeutic targeting of RAF1 is promising, but it requires further investigation for the relation between clinical features and RAF1 aberrations regarding the MAPK signaling pathway in various solid tumors to realize the precision medicine. Methods: Between October 2019 and June 2023, Samsung Medical Center, 3,895 patients with metastatic cancer patients received a next-generation sequencing (NGS) using TruSight Oncology 500 (TSO500) assay as a routine clinical practice. We surveyed the incidence of RAF1 aberration including mutation (single-nucleotide variant [SNV]), amplification (copy-number variation), and fusion. Results: In 3,895 metastatic cancer patients, 77 (2.0%) had RAF1 aberrations in their tumor specimen. Of 77 patients, 44 (1.1%) had RAF1 mutations (SNV), 25 (0.6%) had RAF1 amplification and 10 (0.3%) had RAF1 fusions. Among 10 patients with RAF1 fusion, concurrent RAF1 amplification and RAF1 mutation were detected in one patient each. The most common tumor types were bladder cancer (11.5%), followed by ampulla of Vater (AoV) cancer (5.3%), melanoma (3.0%), gallbladder (GB) cancer (2.6%), and gastric cancer (2.3%). Microsatellite instability high (MSI-H) tumors were found in 5 out of 76 patients (6.6%) with RAF1 aberration, while MSI-H tumors were found only in 2.1% of patients with wild-type RAF1 cancer (p < 0.0001). Conclusion: We showed that when patients with metastatic solid cancer receive NGS test, approximately 2.0% have RAF1 aberrations in their tumor specimen.

Object detection is a popular image processing technique, widely used in numerous applications for detecting and locating objects in images or videos. While being one of the fastest algorithms for object detection, Single-Shot Multibox Detection (SSD) networks are also computationally very demanding, which limits their usage in real-time edge applications. Even though the SSD post-processing algorithm is not the most complex segment of the overall SSD object detection network, it is still computationally demanding and can become a bottleneck with respect to processing latency and power consumption, especially in edge applications with limited resources. When using hardware accelerators to accelerate backbone CNN processing, the SSD post-processing step implemented in software can become critical for high-end applications where high frame rates are required, as this paper shows. To overcome this problem, we propose Puppis, an architecture for hardware acceleration of SSD post-processing algorithm. As experiments will show, our solution will lead to an average SSD post-processing speedup of 34.42 when compared with a software implementation. Furthermore, execution of a complete SSD network will be on average 45.39 times faster than software implementation when the proposed Puppis SSD hardware accelerator is used together with some existing CNN accelerators.

To avoid the endless accumulation of QTL effects during pyramiding breeding, QTL epistasis plays a role of homeostasis. Four single-segment substitution lines with heading date QTLs were utilized to construct pyramiding materials with dual QTLs and triple QTLs, allowing for the estimation of QTL epistatic effects on heading date in rice. The epistatic components of dual QTL and triple QTL interactions were analyzed using data from three seasons of two years. All four QTLs can be considered as dominant loci, demonstrating superdominance. 75% of dual QTL interactions and 81.25% of triple QTL interactions obtained statistically significant results, reaffirming the prevalence of epistasis. Interactions of four QTLs with three positive effects and one negative effect generated 62.5% negative dual QTL epistatic effects and 57.7% positive triple QTL epistatic effects, forming the balance relationship “positive-negative-positive”. In fact, QTL effects were consistently partially neutralized by mixed QTL epistatic effects so as to control the infinite accumulation of QTL effects. QTL epistasis plays a role of homeostasis on heading date in rice. However, there were two exceptions. The directions of OsMADS50 and Hd3a-2 effects were consistently aligned with those of their mixed epistases, suggesting that the QTL or gene could be employed in pyramiding breeding with different objectives. This study elucidated the mechanism of epistatic interactions among four QTLs and provided valuable genetic resources for improving heading date in rice.

Understanding the catalytic performance of different materials is of crucial importance for further technological advancements. This especially relates to the behavior of different classes of catalysts under operating conditions. Here we analyze the effects of local coordination of metal centers (Mn, Fe, Co) in graphene-embedded Single-Atom Catalysts (SACs). We have started from well-known M@N4-graphene catalysts and systematically replaced nitrogen atoms with oxygen or sulfur atom to obtain M@OxNy-graphene and M@SxNy-graphene SACs (x+y=4). We show that local coordination strongly affects the electronic structure and the reactivity towards hydrogen and oxygen species. However, the stability is even more affected. Using the concept of Pourbaix plots, we show that the replacement of nitrogen atoms coordinating metal center with O or S destabilizes SACs towards the dissolution, while the metal centers get easily covered by O and OH acting as additional ligands at high anodic potentials and high pH values. Thus, not only should local coordination be considered in terms of the activity of SACs, but it is also necessary to consider its effects on the speciation of SACs' active centers under different potential and pH conditions.

There has been considerable research on reconstructing 3D shapes from single-view images; however, preserving the detailed information of the input image remains difficult. In this paper, we propose the application of a gradient map to train a network, aimed at improving the visual quality of fine-grained details such as the thin and tiny components of generated shapes. Each gradient map was created from the original voxel data, and each value represented the amount of information per volume. Here, the gradient map was defined by several methods that mathematically quantify and represent the detailed structure of an object. By applying this map to the loss function in training, we could induce the network to intensively train partial details, such as thin and narrow parts. We demonstrated that the detailed information was well-recovered when a weight that is proportional to the gradient value was applied to the loss. Furthermore, it is expected that our method will contribute to the development of 3D technologies related to the construction of virtual space for simulation and new customer experience.

The quest for accurate and more efficient methods for solving periodic/oscillatory problems is gaining more attention in recent time. This paper presents the construction and implementation of a family of exponentially–fitted Obrechkoff methods. A single–step Obrechkoff method involving terms up to the fourth derivatives was used as the base method. We also present the stability and convergence properties of the constructed family of methods. Two numerical examples were use to illustrate the performance of the constructed methods.

Boosted by the progress in deep learning, Single Image Super-Resolution (SISR) has gained a lot of interest in the Remote Sensing community, who sees it as an oportunity to compensate for satellite's ever-limited spatial resolution with respect to end users needs. While there has been a great amount of work on network architures in the latest years, deep learning based SISR in remote sensing is still limited by the availability of the large training sets it requires. The lack of publicly available large datasets with the required variability in terms of landscapes and seasons pushes researchers to simulate their own dataset by means of downsampling. This may impair the applicability of the trained model on real world data at the target input resolution. In this paper, we propose an open-data licenced dataset composed of 10m and 20m cloud-free surface reflectance patches from Sentinel-2, with their reference spatially-registered surface reflectance patches at 5 meter resolution acquired on the same day by the VENµS satellite. This dataset covers 29 locations on earth with a total of 132 955 patches of 256x256 pixels at 5 meters resolution, and can be used for the training of super-resolution algorithms to bring the spatial resolution of 8 of the Sentinel-2 bands down to 5 meters.

A Weyl semimetal is a novel crystal with low-energy electronic excitations that behave as Weyl fermions. It has received worldwide interest and was believed to have opened the next era of condensed matter physics after graphene and three-dimensional topological insulators. Howev-er, it is not easy to obtain a single large-size crystal because there are many nucleations in the preparation process. Here, a bottom-seed CVT growth method is proposed in this paper, and we acquired the large-size, high-quality NbAs single crystals up to 5x4x4 mm3 finally. X-ray diffrac-tion and STEM confirmed that they are tetragonal NbAs, which the key is to use seed crystal in vertical growth furnace. Notably, the photoelectric properties of the crystal are obtained under the existing conditions, which paves the way for the follow-up work.

The rise of data science in biology stimulates interdisciplinary collaborations to address fundamental questions. Here, we report the outcome of the first SINFONIA symposium focused on revealing the mechanisms governing plant reproductive development across biological scales. The intricate and dynamic target networks of known regulators of flower development remain poorly understood. To analyze development from the genome to the final floral organ morphology, high-resolution data that capture spatiotemporal regulatory activities are necessary and require advanced computational methods for analysis and modeling. Moreover, frameworks to share data, practices and approaches that facilitate the combination of varied expertise to advance the field are called for. Training young researchers in interdisciplinary approaches and science communication offers the opportunity to establish a collaborative mindset to shape future research.

Micro-blade design is an important factor in the cutting of single cells and other biological structures. This paper describes the fabrication process of three dimensional (3D) micro-blades for the cutting of single cells in a microfluidic “guillotine” intended for fundamental wound repair and regeneration studies. Our microfluidic guillotine consists of a fixed 3D micro-blade centered in a microchannel to bisect cells flowing through. We show that the Nanoscribe two-photon polymerization direct laser writing system is capable of fabricating complex 3D micro-blade geometries. However, structures made of the Nanoscribe IP-S resin have low adhesion to silicon, and they tend to peel off from the substrate after at most two times of replica molding in poly(dimethylsiloxane) (PDMS). Our work demonstrates that the use of a secondary mold replicates Nanoscribe printed features faithfully for at least 10 iterations. Finally, we show that complex micro-blade features can generate different degrees of cell wounding and cell survival rates compared with simple blades possessing a vertical cutting edge fabricated with conventional 2.5D photolithography. Our work lays the foundation for future applications in single cell analyses, wound repair and regeneration studies, as well as investigations of the physics of cutting and the interaction between the micro-blade and biological structures.

Proteomic technology has improved at a staggering pace in recent years, with even practitioners challenged to keep up with new methods and hardware. The most common metric used for method performance is the number of peptides and proteins identified. While this metric may be helpful for proteomics researchers shopping for new hardware, this is often not the most biologically relevant metric. Biologists often utilize proteomics in the search for protein regulators that are of lower relative copy number in the cell. In this review, I re-evaluate untargeted proteomics data using a simple graphical representation of the absolute copy number of proteins present in a single cancer cell as a metric. By comparing single shot proteomics data to the coverage of the most in-depth proteomic analysis of that cell line acquired to-date we can obtain a rapid metric of method performance. Using a simple copy number metric allows visualization of how proteomics has developed in both sensitivity and overall dynamic range when using both relatively long and short acquisition times. To enable reanalysis beyond what is presented here, two available web applications have been developed for single and multi-experiment comparisons with reference protein copy number data for multiple cell lines and organisms.

In this research paper, a high gain transformer less inverter modeling which is used for the smart grid technology or as the stand alone for home appliances is proposed. The proposed transformer less topology provides a higher voltage gain, low cost, small size and simple control stand alone transformer less inverter for home appliances. The above inverter is modeled by using software which is known as MATLAB/ Simulimk.

Two types of trenches cross-section in conventional vertical and brand new reverse-V-shape have fabricated on SCD substrate by micro-jet water-assist laser, the epitaxial lateral overgrowth technique has applied by microwave plasma chemical vapor deposition system in forming multiple micrometer-size channels. Raman and SEM techniques have applied in analyze both types growth layer characterization. Optical microscope has used to test microchannels hollowness. As a result, with the brand new reverse-V-shape trench, epitaxial lateral overgrowth layer reaches higher SCD surface morphology and crystal quality.

Quantum leaps advances in the single-molecule investigative science have been made possible over the past decades through the implication of nanopores, as versatile components on dedicated biosensors. Here, we employed the nanopore-tweezing technique to capture amino acid-functionalized, peptide-nucleic acids (PNA) with -hemolysin-based nanopores, and correlate the ensuing stochastic fluctuations of the ionic current through the nanopore with the composition and order of bases in the PNAs primary structure. We demonstrate that while the system enables detection of distinct bases on homopolymeric PNA or triplet bases on heteropolymeric strands, it also reveals rich insights into the conformational dynamics of the entrapped PNA within the nanopore, relevant for perfecting the recognition capability single-molecule sequencing.

Single cell RNA-seq (scRNA-seq) profiles conceal temporal and spatial tissue developmental information. De novo reconstruction of single cell temporal trajectory has been fairly addressed, but reverse engineering single cell 3D spatial tissue localization is hitherto landmark based, and de novo spatial reconstruction is a compelling computational open problem. Here we show that a new algorithm - named D-CE - for coalescent embedding of single cell transcriptomic networks can address this open problem. We rely merely on the spatial information encoded in the expression patterns of developmental signal transcription factor (DST) genes, and we find that D-CE of cell-cell association DST-transcriptomic networks reliably reconstructs the Geo-seq or single cell samples’ 3D spatial tissue distribution. Comparison to the novoSpaRC and CSOmap (recent and only available de novo 3D spatial reconstruction methods) on 16 datasets and 681 reconstructions, reveals a significantly distinctive superior performance of D-CE.

This paper investigated building data from multispectral and single-photon Lidar systems. The multispectral datasets from the individual channels and fused channels were explored. The multispectral and single-photon Lidar data were compared across multiple aspects: the data acquisition geometry, number of echoes, intensity, density, resolution, data defects, noise level, and the absolute and relative accuracy. In addition, we explored the performance of the multispectral and single-photon data for roof plane detection for eight complex/stylish buildings to investigate the suitability of these data for 3D building reconstruction. The building data from the single-photon and multispectral Lidar systems were evaluated with respect to the reference building vector data with an accuracy of better than 5 cm. The advantages and disadvantages of both technologies and their applications in the urban building environment are discussed.

Hydrogen evolution reaction (HER) is one of the most important reaction in electrochemistry. This is not only because it is the simplest way to produce high purity hydrogen and the fact that it is the side reaction in many other technologies. HER actually shaped current electrochemistry because it was in focus of active research for so many years (and it still is). The number of catalysts investigated for HER is immense, and it is impossible to overview them all. In fact, it seems that the complexity of the field overcomes the complexity of HER. The aim of this review is to point out some of the latest developments in HER catalysis, current directions and some of the missing links between a single crystal, nanosized supported catalysts and, recently emerging, single atom catalysts for HER

In this paper, the author obtains an analytic exact form of Heaviside function, which is also known as Unit Step function and constitutes a fundamental concept of the Operational Calculus.In particulat, this function is explicitly expressed in a very simple manner by the aid of purely algebraic representations. The novelty of this work is that the proposed explicit formula is not performed in terms of non – elementary special functions, e.g. Dirac delta function or Error function and also is neither the limit of a function, nor the limit of a sequence of functions with point wise or uniform convergence. Hence, it may be much more appropriate and useful in the computational procedures which are inserted into Operational Calculus techniques and other engineering practices.

Recent advances in single-atom catalysis resulted in readily accessible materials whose application in most catalytic reactions mediated by conventional nanoparticle-based catalysts often results in higher activity and selectivity. Can we expect catalysis by atomically dispersed atoms to find practical applications? Which are the hurdles to be overcome prior to widespread uptake of atomically dispersed metals in industrial synthetic processes and in hydrogen fuel cells?

The use of motion capture has increased from last decade in a varied spectrum of applications like film special effects, controlling games and robots, rehabilitation system, animations etc. The current human motion capture techniques use markers, structured environment, and high resolution cameras in a dedicated environment. Because of rapid movement, elbow angle estimation is observed as the most difficult problem in human motion capture system. In this paper, we take elbow angle estimation as our research subject and propose a novel, markerless and cost-effective solution that uses RGB camera for estimating elbow angle in real time using part affinity field. We have recruited five (5) participants of (height, 168 ± 8 cm; mass, 61 ± 17 kg) to perform cup to mouth movement and at the same time measured the angle by both RGB camera and Microsoft Kinect. The experimental results illustrate that markerless and cost-effective RGB camera has a median RMS errors of 3.06° and 0.95° in sagittal and coronal plane respectively as compared to Microsoft Kinect.

Although good field emission from graphene has been demonstrated from a wide variety of different microfabricated structures, very few of them can be used to improve the design of cold field emitters for electron microscopy applications. Most of them consist of densely packed nano-emitters, which produce a large array of defocused overlapping electron beams, and therefore cannot be subsequently focused down to a single nanometer electron probe. This paper reviews the kind of single-tip cathode structures suitable in cold field emission guns for instruments such as scanning electron microscopy, transmission electron microscope or scanning transmission electron microscopy, and reviews progress in fabricating them from graphene-based materials.

Solvent-free, single-ion conducting electrolytes are sought after for use in electrochemical energy storage devices. Here, we investigate the ionic conductivity and how this property is influenced by segmental mobility and conducting ion number in crosslinked single-ion conducting polyether-based electrolytes with varying tethered anion and counter-cation types. Crosslinked electrolytes are prepared by the polymerization of poly(ethylene glycol) diacrylate (PEGDA), poly(ethylene glycol) methyl ether acrylate, and ionic monomers. The ionic conductivity of the electrolytes is measured and interpreted in the context of differential scanning calorimetry and Raman spectroscopy measurements. A lithiated crosslinked electrolyte prepared with PEG₃₁DA and STFSI monomers is found to have a lithium ion conductivity of 3.2 × 10^-6 and 1.8 × 10⁻⁵ S/cm at 55 and 100 °C, respectively. The percentage of unpaired anions for this electrolyte was estimated at about 23% via Raman spectroscopy. Despite the large variances in metal cation – STFSI binding energies as predicted via DFT and large variations in ionic conductivity, STFSI-based crosslinked electrolytes with the same charge density and varying cations (Li, Na, K, Mg, and Ca) were estimated to all have unpaired anion populations in the range of 19 to 29%.

The past two decades has seen a growing demand for high-power, high-voltage utility scale inverters mostly fueled by the integration of large solar PV and wind farms. Multilevel inverters have emerged as the industry choice for these megawatt range inverters because their reduced voltage stress, capable of generating an almost sinusoidal voltage, in-built redundancy, among others. This paper present a new Switched-Source Multilevel Inverter (SS MLI) architecture. The new inverter show superior over existing topologies. It has reduced voltage stress on the semiconductor, uses less number of switches –reduced size/weight/cost and increased efficiency. The new SSMLI is comprised of two voltage sources (V₁, V₂) and 6 switches. It is capable of generating 5-level output voltage in symmetric modes (i.e., V₁ = V₂), and 7-level output voltage in asymmetric modes (i.e., V₁ ≠ V₂). To demonstrate the validity of the proposed inverter, simulations results using MATLAB^® /Simulink^® for 5- and 7-level output voltages are presented . The simulations are also verified experimentally using a laboratory prototype.

The rationalization of single molecule magnets’ (SMMs) magnetic properties by quantum mechanical approaches represents a major task in the field of the Molecular Magnetism. The fundamental interpretative key of molecular magnetism is the phenomenological Spin Hamiltonian and the understanding of the role of its different terms by electronic structure calculations is expected to steer the rational design of new and more performing SMMs. This paper deals with the ab initio calculation of isotropic and anisotropic exchange contributions in the Fe(III) dimer [Fe₂(OCH₃)₂(dbm)₄]. This system represents the building block of one of the most studied Single Molecule Magnets ([Fe₄RC(CH₂O)₃)₂(dpm)₆] where R can be an aliphatic chain or a phenyl group just to name the most common functionalization groups) and its relatively reduced size allows the use of a high computational level of theory. Calculations were performed using CASSCF and NEVPT2 approaches on the X-ray geometry as assessment of the computational protocol, which has then be used to evinced the importance of the outer coordination shell nature through organic ligand modelization. Magneto-structural correlations as function of internal degrees of freedom for isotropic and anisotropic exchange contributions are also presented, outlining for the first time the extremely rapidly changing nature of the anisotropic exchange coupling.

Introduction: Migraine is one of the most prominent headache disorders with a global burden of over one billion patients and presented as a disabling and painful disorder. Pathophysiological mechanism of migraine is not fully understood, but the most accepted theory suggests that migraine is caused primarily by neural dysfunction leading to secondary changes in cerebral perfusion. Methods: Authors conducted a case-control study in 175 patients; 88 of them were migraineurs and 87 health controls. Optical coherence tomography (OCT) was performed in all patients using spectral-domain OCT device in the same environmental conditions. All participants met both inclusion and exclusion criteria in order to achieve more homogeneous groups. OCT was performed to scan all retinal layers with an emphasis on the inner plexiform layer (IPL). Results: Among 175 examined subjects, 84% of them were women and in the group of migraineurs we found 56% without aura and 44 % with aura. After collecting tomography data authors did not find subjects in which changes of IPL were found. Nevertheless, only moderate differences in the IPL thickness in all quadrants except the central area were found in the group of migraineurs with aura using Pearson’s test. Conclusion: According to presented results, no significant changes of the IPL thickness in migraine patients were found. Authors have to emphasize the need for further investigation of the relationship between average migraine headache days per month and the thickness of the IPL.

(1) Background: The aim of the research was to present and emphasize the importance of magnetic resonance imaging (MRI) in diagnosing Achilles tendon (AT) ruptures by presenting case reports. (2) Materials and Methods: The sample of respondents included 7 patients (4 males and 3 females, 2 athletes and 5 non-athletes), aged 25 to 58 years, with AT injuries, who were examined and treated at the Institute for Treatment and Rehabilitation "Niška Banja", Niš, Serbia. Ankle examinations with MRI were conducted using the Esaote O-scan 0.3 T machine. The examinations were performed without the application of a paramagnetic contrast agent and without the use of anesthesia. Results: The MRI method's sensitivity and overall diagnostic accuracy were excellent, with 100% true positives. In our study, the method accurately detected the presence, location, and severity of AT injuries in all cases. MRI is an important and reliable method for detecting AT injuries, classifying them, monitoring the course of recovery, and assessing the effects of therapy. Conclusions: An unrecognized or delayed diagnosis of an AT injury can lead to chronic changes. Timely diagnosis (clinical examination, ultrasonography, magnetic resonance imaging) and appropriate treatment (conservative or operative) enable patients to return to normal activities, including sports. Unfortunately, the use of MRI is limited by restricted access and the cost of the examination.

In this paper, we propose a method for the generation of simulation test scenarios for autonomous driving. Based on the requirements of standard regulatory test scenarios, we can generate virtual simulation scenarios and functional scenario libraries for autonomous driving, which can be used for simulation verification of different ADAS functions. Firstly, the design operation domain (ODD) of the functional scenario is selected and the weight values of the ODD elements taken are calculated; then a combination test algorithm based on parameter weights is improved to generate autonomous driving virtual simulation test cases for the ODD elements, which can effectively reduce the number of generated test cases compared with the traditional combination test algorithm; then the traffic participant elements under each test case are Then, the values of the subelements under the traffic participant element in each test case are sampled and clustered to obtain hazard specific scenarios. Finally, the specific scenarios are applied to the automatic emergency braking (AEB) system on the model-in-the-loop (MIL) testbed to verify the effectiveness of this scenario generation method.

To achieve user retention through multifactor synergy, Internet enterprises must reduce costs and increase efficiency and sustainable development. In response to the dilemma that Internet compa-nies are experiencing increasingly high user acquisition costs and serious user churn, this paper uses a sample of 46,695 user reviews of nine product series from Xiaomi Ecological Chain. Case studies and qualitative comparative analysis are used to explore the influence mechanisms of quality of experience, brand trust, and brand attachment on users' retention intentions. Our find-ings are as follows. (1) Brand attachment alone is not necessary for high user retention intention, but user perception, cognition, and brand trust are necessary. (2) Quality of experience positively impacts brand trust, attachment, and user retention intention. Therefore, improving user perception and cognition is critical in generating high user retention intention. (3) Five configuration paths can achieve high user retention intention, three configuration paths lead to low user retention intention, and there is an asymmetric relationship between these paths. Among them, the role of quality of experience-driven configuration paths in generating user retention intention is the most prominent. (4) In the substitution relationship between configuration paths, user perception, and cognition can substitute with brand trust and attachment. Our findings have important theoretical and practical implications for revealing the realization paths of high user retention intention in Internet companies and provide a new perspective for future research.

Background: Myeloid sarcoma (MS), also known as granulocytic sarcoma or chloroma, is a rare disease entity characterized by the emergence of an extramedullary tumour which may be antecedent, coexisting or manifest secondarily to an ongoing malignancy of lymphoid origin. Owing to its low prevalence, scientific reports addressing this matter comprise mainly retrospective studies with a limited number of participants, rather low-quality research and only few case reports. Despite MS’s rarity, the need for enhancing diagnostic tools and refinement of therapeutic regimens is broadly recognised among physicians. Case summary: In this case series, we present the clinical histories of two patients diagnosed with MS. The former (Case 1) exhibited MS of the sternum alongside chronic myeloid leukemia (CML), while in case of the latter (Case 2) MS was the initial manifestation of a current acute myeloid leukemia (AML). Regardless of treatment institution comprising chemotherapy (CHTH) and radiotherapy (RT), the patient afflicted by CML did eventually pass due to cardiorespiratory insufficiency secondary to an infection, whereas the second one is in clinical remission up to this date, that is 16 months since MS had been diagnosed. Furthermore, a comprehensive analysis of previously reported cases was conducted which involves MS in patients with AML and CML. Conclusion: The objective of this report is to emphasize the heterogeneity among the clinical manifestations of MS, to underline the relevance of histopathological and molecular diagnostic tools in opting for the appropriate therapy and that, in spite of it occurring rather uncommonly, physicians should think of MS in presence of pathological masses in patients under risk of hematological malignancies.

By using the Sala-i-Martin version of extreme bounds analysis, which is based on the cumulative density function, cross-sectional evidence is presented on the robust determinants of the infection and case mortality rates of Covid-19. The results show that, for most part, different factors determine the infection and mortality rates in developed and developing countries. However, common factors are also apparent, including the risk environment, the number of tests per million and the percentage of population over 65. Notwithstanding the possibility that the official data represent a partial reflection of the truth, it is concluded that the results presented in this study provide useful information that may aid decision-making in the fight against the pandemic.

Background: This study presents a graph-based and purely structural analysis to detect echo chambers on Twitter. Echo chambers are a concern as they can spread misinformation and reinforce harmful stereotypes and biases in social networks. Methods: The study recorded the German-language Twitter stream over two months, recording about 180.000 accounts and their interactions. The study focuses on retweet interaction patterns in the German-speaking Twitter stream and found that the greedy modularity maximization and HITS metric are the most effective methods for identifying echo chambers. Results: The purely structural detection approach was able to identify an echo chamber (red community) that was focused on a few topics with a triad of Anti-Covid, right-wing populism, and pro-Russian positions (very likely reinforced by Kremlin-orchestrated troll accounts). In contrast, a blue community was much more heterogeneous and showed "normal" communication interaction patterns. Conclusions: The study highlights the effects of echo chambers as they can make political discourse dysfunctional and foster polarization in open societies. The presented results contribute to identifying problematic interaction patterns in social networks often involved in the spread of disinformation by problematic actors. It is important to note that not the content but only the interaction patterns would be used as a decision criterion, thus avoiding problematic content censorship.

Care coordination (CC) for children with special healthcare needs and medical complexity (CSHCN-CMC) is challenging, and medication management is especially difficult for providers, parents/caregivers, and patients alike. While numerous strategies for CC have been suggested and implemented, barriers to medication optimization remain. The report describes the creation of a pediatric clinical pharmacotherapy practice, related standard operating procedures to assure consistent application of screening tools and care provision through comprehensive medication management (CMM), and establishment of a collaborative practice agreement (CPA) to guide drug therapy delegation, monitoring, and modification. The methodology of a prospective case series is also presented to highlight drug therapy problems and their resolution in CSHCN-CMC. Future opportunities to expand the practice for engagement in population health management as well as prior authorization activities on behalf of physicians will be discussed.

In the ongoing Covid-19 pandemic, in the global data on the case fatality ratio and other indices reflecting death rate, there is a consistent downward trend from mid-April to mid-August. The downward trend can be an illusion caused by biases and limitations of data or it could faithfully reflect a declining death rate. A variety of explanations for this trend are possible, but a systematic analysis of the testable predictions of the alternative hypotheses has not yet been attempted. We state six testable alternative hypotheses, analyse their testable predictions using public domain data and evaluate their relative contributions to the downward trend. We show that a decline in the death rate is real; changing age structure of the infected population and evolution of the virus towards reduced virulence are the most supported hypotheses and together contribute to major part of the trend. The testable predictions from other explanations including altered testing efficiency, time lag, improved treatment protocols and herd immunity are not consistently supported, or do not appear to make a major contribution to this trend although they may influence some other patterns of the epidemic.

Background: Administrative healthcare databases are widespread and are often standardized with regard to their content and data coding, thus they can be used also as data sources for surveillance and epidemiological research. Chronic dialysis requires patients to frequently access hospital and clinic services, causing a heavy burden to healthcare providers. This also means that these patients are routinely tracked on administrative databases, yet very few case definitions for their identification are currently available. The aim of this study was to develop two algorithms derived from administrative data for identifying incident chronic dialysis patients and test their validity compared to the reference standard of the regional dialysis registry. Methods: The algorithms are based on data retrieved from hospital discharge records (HDR) and ambulatory specialty visits (ASV) to identify incident chronic dialysis patients in an Italian region. Subjects are included if they have at least one event in the HDR or ASV databases based on the ICD9-CM dialysis-related diagnosis or procedure codes in the study period. Exclusion criteria comprise non-residents, prevalent cases, or patients undergoing temporary dialysis, and are evaluated only on ASV data by the first algorithm, on both ASV and HDR data by the second algorithm. We validated the algorithms against the Emilia-Romagna regional dialysis registry by searching for incident patients in 2014. Results: Algorithm 1 identified 680 patients and algorithm 2 identified 676 initiating dialysis in 2014, compared to 625 patients included in the regional dialysis registry. Sensitivity for the two algorithms was respectively 90.8% and 88.4%, positive predictive value 84.0% and 82.0%, and percentage agreement was 77.4% and 74.1%. Conclusions: These results suggest that administrative data have high sensitivity and positive predictive value for the identification of incident chronic dialysis patients. Algorithm 1, which showed the higher accuracy and has a simpler case definition, can be used in place of regional dialysis registries when they are not present or sufficiently developed in a region, or to improve the accuracy and timeliness of existing registries.

China is one of the world’s most important countries for waterfowl because of the large amount of potential habitat and its position along major migratory routes. Waterfowl poaching in China is a serious threat, and for over twenty years colleagues and I have tracked waterfowl poaching in China including hunting methods, trade routes and prices involved. According to the latest survey of a NGO, 11.8% of Chinese people have participated in wildlife consumption, and about 32.0% of people have seen wildlife consumption (Not necessarily involved in killing and eating the wildlife). The survey results come from 100 000 internet questionnaires. The current report provides an update focusing on waterfowl poaching in Xinjiang Province of the northwest China, where is highly pathogenic area on the avian influenza, SARS and the Wuhan coronavirus pneumonia (such as COVID-19). The cases in 2011, 2012, and 2014 involved about 1816 to 2760 birds of more than 20 species, with an estimated total of 200 000 wild birds being hunted by a group per year in Xinjiang. Strangely, the poacher was not punished by any law. We know a few waterfowl species are protected as a list of Key Protected Species in China, and hopefully this report will draw attention to the scope of waterfowl poaching in China. China has made great progress with protecting other wildlife, and hopefully more can be done to protect migrating waterfowl.

Background and Objectives: Many epidemiological studies have shown a positive association between black carbon (BC) and the exacerbation of allergic rhinitis and allergic asthma. However, none of the studies in Serbia examined this relationship so far. The aim of this study was to examine the associations between BC and emergency department (ED) visits for allergic rhinitis and allergic asthma in the Užice region of Serbia. Materials and Methods: A time-stratified case-crossover design was applied to 523 ED visits for allergic rhinitis and asthma exacerbation that occurred in the Užice region of Serbia between 2012−2014. Data regarding ED visits were routinely collected in the Health Center of Užice. The daily average concentrations of BC were measured by automatic ambient air quality monitoring stations. Odds ratios and their corresponding 95% confidence intervals were estimated using conditional logistic regression adjusted for the potential confounding influence of weather variables (temperature, humidity, and air pressure). Results: Statistically significant associations were observed between ED visits for allergic rhinitis and 2-day lagged exposure to BC (OR = 3.20; CI = 1.00−10.18; p < 0.05) and allergic asthma and 3-day lagged exposure to BC (OR = 3.23; CI = 1.05−9.95; p < 0.05). Conclusion: Exposure to BC in the Užice region increases the risk of ED visits for allergic rhinitis and asthma, particularly during the heating season.

Cyanobacterial harmful algal blooms (CyanoHABs) are increasing in prevalence and severity globally and locally in the Great Lakes region. CyanoHABs have the potential to produce serious adverse human health effects due to the production of cyanotoxins from cyanobacteria. Common routes of exposure include recreational exposure (swimming, skiing, and boating), ingestion, and aerosolization of contaminated water sources. Cyanotoxins have been shown to adversely affect several major organ systems contributing to hepatotoxicity, gastrointestinal distress, and pulmonary inflammation. We present three pediatric case-reports that coincided with CyanoHABs exposure with a focus on presentation of illness, diagnostic work-up, and treatment of CyanoHAB-related illnesses. Potential cyanotoxin exposure occurred while swimming in the Maumee River and Maumee State Park in Northwest OH during the Summer months which coincide with peak CyanoHAB activity. Primary symptoms included generalized macular rash, fever, vomiting, diarrhea, and severe respiratory distress. Significant labs included leukocytosis and elevated C-reactive protein. All patients ultimately recovered with supportive care. Symptoms following potential cyanotoxin exposure coincide with multiple disease states representing an urgent need to develop specific diagnostic tests of exposure.

Simple cysts (SCs) within the testes are rare in adults. The testicular SC lining comprises mesothelial cells. This report presents a case involving the accidental discovery of a castration-worthy SC in the right testis of a Japanese man in his 90s who was diagnosed with prostatic adenocarcinoma. Microscopic analysis revealed that the cystic wall was covered with flat to cuboidal mesothelial cells. Immunohistochemistry demonstrated mesothelial cell positivity for calretinin, Wilms tumor 1 (WT-1), Hector Battifora mesothelial epitope-1 (HBME-1), and cyclin-dependent kinase inhibitor p16 (p16INK4a). Notably, no human papillomavirus (HPV) in situ hybridization was detected. This report outlines an exceptionally rare instance of a simple cyst within the testis, suggesting the possibility of its origin from ectopic rete testis epithelium. This marks the inaugural documentation in the English literature of an SC within the testis found incidentally during castration for prostatic cancer.

(1) Background: The aim of this study is to investigate the diagnostic-therapeutic problem of pelvic recurrence of rectum cancer, highlighting current surgical standards and the possible role of the minimally invasive approach. This retrospective analysis of our surgical case study wishes to enter this debate while suggesting a possible line of action, based on the site of recurrence; (2) Methods: We examined, retrospectively, all the patients diagnosed, between 2008 and 2018, with cancer of the rectum at the "Pietro Valdoni" Department of Surgery and monitored their follow-up for 5 years. The sample consisted of 368 patients with rectal neoplasm, 136 females and 232 males, with an average age of 65.8 (ranging from 37 to 86); (3) Results: In 103 of the cases, the neoplasm was located in the upper rectum (28%), in 119 cases in the middle rectum (32.3%), in 102 cases in the lower rectum (27.7%), in 31 cases (8.4%) at the level of the right/sigma junction and in 13 cases it was not possible to define the site with certainty (3.5%); (4) Conclusions: The discussion re-mains open as to which approach is best at surgical level, whether laparoscopic, robotic or open-air. Our experience informs us that the most dangerous site remains on the anastomotic site.

Considering the harmful effects of cannabis on individuals with a severe mental disorder and the limited effectiveness of current interventions, this case report showcases the beneficial results of a 10-session Avatar intervention for cannabis use disorder (CUD) on a polysubstance user with a comorbid schizoaffective disorder. Virtual reality allowed the creation of an Avatar representing a person significantly related to the patient’s drug use. Avatar intervention for CUD aims to combine exposure, relational, and cognitive behavioral therapies while practicing real-life situations and learning how to manage negative emotions and cravings. Throughout therapy and later on, Mr. C managed to maintain abstinence from all substances. Also, an improvement in the severity of CUD as well as a greater motivation to change consumption, were observed after therapy. As observed by his mother, his psychiatrist, and himself, the benefits of Avatar intervention for CUD extended to other spheres of his life. The drastic results observed in this patient could be promising as an alternative to the current treatment available for people with a dual diagnosis of cannabis use disorder and psychotic disorder, which generally lack effectiveness. A single-blind randomized control trial comparing the treatment with a classical intervention in a larger sample is currently underway to evaluate whether the results are reproducible on a larger sample.

Purpose – The paper aims to view how researchers have operationalized social impact assessment for construction projects over the last ten years. Design/methodology/approach – A systematic review was used to investigate case studies in the Social Life-Cycle Assessment (S-LCA) to analyze the application of the methodology. A qualitative study of 19 articles published between 2012 and 2022 was used to collect content on multiple categories impeding S-LCA through case studies in the construction industry. Findings – Our results showed the existence of limitations on the qualitative and quantitative aspects in measuring the social indicators. They were associated with the scoring method and the lack of data in some articles. Social implications – From this review, we understood that S-LCA has flaws in terms of the quality of the measurement, scoring method, and the lack of social data. Lack of social data means social impacts are being neglected and not assessed properly since there are several challenges pointed out throughout literature Originality/value – The originality of this research is that it focuses on case studies in the construction industry. It studies the operationalization of the S-LCA in this specific industry showing the different characteristics and challenges in the last 10 years.

When drilling oil and gas wells, hole cleaning efficiency is crucial, particularly in the curved or severely deviated sections. Although many hole-cleaning procedures and models have been developed, most of them have substantial limitations or are difficult to apply in real time. This study aimed to develop a model for the hole cleaning index (HCI) that could be integrated into the drilling operations to provide an automated and real-time evaluation of deviated drilling hole cleaning. The new model herein was developed based on the mechanical drilling parameters, enhanced estimated drilling fluid properties, and cuttings characteristics. This HCI model was validated and tested in the field, as it was applied when drilling 12.25”-intermediate directional sections in two wells with a total length of approximately 2000 ft each. The integration of the HCI helped to attain a much better well drilling performance (50% enhancement) and mitigation of potential problems like pipe sticking and the slower rate of penetration. Since the developed index incorporates the changes in wellbore geometry and other spontaneous field data, the new model could be utilized for real-time optimization and intermediate interventions by drilling teams, unlike commercial software tools which are only useful during the planning phase. For this reason, the HCI can be linked to the driller's control panel to provide timely evaluation and corrective measures related to hole cleaning.

As the digital era advances, many industries continue to expand their use of digital technologies to support company operations, notably at the customer interface, bringing new commercial opportunities and increased efficiencies. However, there are new sets of responsibilities associated with the deployment of these technologies, encompassed within the emerging concept of corporate digital responsibility (CDR), which to date has received little attention in the academic literature. This exploratory paper thus looks to make a small contribution to addressing this gap in the literature. The paper adopts a qualitative, inductive research method, employing an initial scoping literature review followed by two case studies. Based on the research findings, a simple model of CDR parameters is put forward, and the article concludes with a discussion of a number of emergent issues - fair and equitable access, personal and social well-being, environmental implications, and cross-supply chain complexities - that suggest possible directions for future research.

This article addresses the question how the religious narrative identity and subjective religiosity change over the course of 15 years. The cases portrayed are deconverts who have changed their religious affiliations multiple times. It will be carved out what led to their deconversion and what remains as a core of their faith after they have turned away from organized religion for good. Interviews have been conducted at three time points and are analyzed using content analysis. It will become clear that the needs and expectations of the two individuals differ highly, as well as the reasons for turning away from a religious community; yet what is a common core in this joint faithful journey is their need to live their religiosity, now in a private setting.

Bovine tuberculosis (bTB) remains a challenging endemic pathogen of cattle in many parts of the globe. Spatial clustering of Mycoacterium bovis molecular types in cattle suggests that local factors are the primary drivers of spread. Northern Ireland’s agricultural landscape is comprised of highly fragmented farms, distributed across spatially discontinuous land parcels, and these highly fragmented farming structures are thought to facilitate localised spread. We conducted a matched case control study to quantify the risks of bTB breakdown with farm area, farm fragmentation, fragment dispersal, and contact with neighbouring herds. Whilst our results show small but significant increases in breakdown risk associated with each of farm fragmentation, farm area, fragment dispersal, and contact with neighbouring herds, these relationships were strongly confounded with the number of contiguous neighbours with bTB. Our key finding was that every infected neighbour led to an increase in the odds of breakdown by 40% to 50%, and that highly fragmented farms were almost twice as likely to have a bTB positive neighbour compared to non-fragmented farms. Our results suggest that after controlling for herd size, herd type, spatial and temporal factors, farm fragmentation increasingly exposes herds to infection originating from first order spatial neighbours. Given NI’s particularly fragmented landscape, and reliance on short-term leases, our data supports the hypothesis that between-herd contiguous spread is a particularly important component of NI’s bTB disease system.

Since identified as the pathogen responsible for an outbreak of severe respiratory distress in Wuhan, China, the 2019-nCoV coronavirus has caused over 30M cases and 1M deaths globally. Sporadic cases were identified in several states in the US from early January, and large-scale community transmission is believed to have started in late February, leading to a first spike in COVID-19 deaths and overall mortality in late April, and a second spike later in the summer. I show here that the dynamics of the pandemic were different in different regions of the US, showing a north-south pattern, with a first pandemic wave mainly in northern regions, followed by a second wave mainly in southern regions. Analysis of overall mortality data shows that the increase in mortality correlates well with COVID-19 incidence in most regions, and that from April through August COVID-19 deaths accounted for a substantial proportion of all deaths in all parts of the US.

BACKGROUND Krukenberg tumor is a rare metastatic tumor of the ovary with characteristic histopathological features known as signet-ring cells. It usually presents in women around 45 years of age, however, we present an uncommon case in a 38-year-old pregnant woman. We report this case because of the unusual findings, the uncommon presentation in this younger age bracket, its diagnostic challenge, and poor prognosis. CASE PRESENTATION We describe an unusual case of a young woman with a history of painful vaginal bleeding at 13 weeks of pregnancy and treated for abruptio placentae. In her routine prenatal visit at week 20 of pregnancy, she was found to have a uterine fundus greater than her gestational age and referred to the hospital to discard polyhydramnios. At her admission a pelvic ultrasound was performed with normal findings of a 25 weeks pregnancy, also showing bilateral enlarged ovaries with heterogeneous echogenicity. The MRI showed a left tumoral lesion with dimensions of 22.1 x 13.6 x 16.3 cm, with lobulated regular contours with displacement of peripheral structures and mild compression of the bladder, the left ureter, and the inferior vena cava. The lesion was heterogeneous with irregular borders. The patient was programmed for a cesarean section; during the operation, the abdominal cavity showed bilateral tumors compatible with MRI findings, the ovarian tumors were sent to pathology and the results showed poorly differentiated mucinous adenocarcinoma (WHO III) with extensive signet-ring cells, an indicative of Krukenberg tumor. CONCLUSION: The case presented is rare due to its presentation in a pregnant woman without identifiable risk factors for gastric cancer. The incidental finding suggests the pregnancy masked the clinical presentation of gastric cancer, and the rapid deterioration of the patient is consistent with the aggressiveness described in the literature. The limited descriptions of this neoplasm in our country and the torpid evolution of this case highlight the importance of further studies of this cancer in Mexico.

There is much discussion among clinicians, epidemiologists, and public health experts about why case fatality rate from COVID-19 in Italy (at 13.3% as of April 20, 2020, versus a global case fatality rate of 6.9%) is considerably higher than estimates from other countries (especially China, South Korea, and Germany). In this article, we propose several potential explanations for these differences. We suggest that Italy’s overall and relative case fatality rate, as reported by public health authorities, is likely to be inflated by such factors as heterogeneous reporting of coronavirus-related fatalities across countries and the iceberg effect of under-testing, yielding a distorted view of the global severity of the COVID-19 pandemic. We also acknowledge that deaths from COVID-19 in Italy are still likely to be higher than in other equally affected nations due to its unique demographic and socio-economic profile. Lastly, we discuss the important role of the stress imparted by the epidemic on the Italian healthcare system, which weakened its capacity to adequately respond to the sudden influx of COVID-19 patients in the most affected areas of the country, especially in the Lombardy region.

Resistance against amitraz in varroa mite populations has become a subject of interest in recent years due to increasing reports of reduced field efficacy of amitraz treatments, especially from some beekeepers in France and the United States. The loss of amitraz as a reliable tool to effectively reduce varroa mite infestation in the field could severely worsen the position of beekeepers in the fight to keep varroa infestation rates in their colonies at low levels. In this publication, we present data from French apiaries, collected in the years 2020 and 2021. These data include field efficacy of an authorized amitraz-based varroa treatment (Apivar®) and results of laboratory sensitivity assays of varroa mites exposed towards the reference LC90 concentration of amitraz. In addition, a total of 240 varroa mites from Eastern, Central, and Southern regions in France that were previously classified as either “sensitive” or “resistant” towards amitraz in a laboratory sensitivity assay were genotyped. The genetic analyses of mite samples are focused on the β−adrenergic-like octopamine receptor, which is considered as the main target site for amitraz in varroa mites. Special attention was given to a single nucleotide polymorphism (SNP) at position 260 of the ORβ-2R-L gene that had previously been described by Hernández Rodríguez et al. (2021) as associated to the resistance to amitraz in French varroa mites. Our findings confirm that amitraz resistance occurs in patches or “islands of resistance” with a less severe reduction in treatment efficacy compared to pyrethroid resistance or coumaphos resistance in varroa mites. The results of our genetic analyses of varroa mites call into question the hypothesis of the SNP at position 260 of the ORβ-2R-L gene being directly responsible for amitraz resistance development.

With the rising cost of animal feed protein, finding affordable and effective substitutes is crucial. Walnut kernel cake, a polyphenols, fiber, protein and fat-rich byproduct of walnut oil extraction, has been underexplored as a potential protein replacement in pig feed. In this study, we found that feeding large Diqing Tibetan pigs walnut kernel cake promoted adipose deposition and improved pork quality during pig growth. Transcriptome analysis revealed the upregulation of genes ANGPTL8, CCNP, ETV4, and TRIB3, associated with adipose deposition. Pathway analysis highlighted enrichment in adipose-deposition-related pathways, including PPAR, Insulin, PI3K-Akt, Wnt, and MAPK signaling. Further analysis identified DEGs (differentially expressed genes) positively correlated with adipose-related traits, such as PER2 and PTGES. Single-cell transcriptome data pointed to the specific expression of CD248 and PTGES in adipocyte progenitor/stem cells (APSCs), pivotal for adipocyte differentiation and adipose deposition regulation. This study demonstrates walnut kernel cake's potential to substitute soybean cake in pig feed, providing high-quality protein and promoting adipose deposition. It offers insights into feed protein replacement, human functional food, fat metabolism, and related diseases, with marker genes and pathways supporting pig breeding and pork quality improvement.

Recently, nanobodies have taken center stage in research on drug discovery and development. Several therapeutic possibilities using nanobodies are presently undergoing clinical trials and waiting for FDA approval. The goal of this study was to emphasize the potential of nanobodies as therapeutic agents by concentrating on the most recent published studies that examined their properties, manufacturing, and possible applications. This article demonstrates that the unique properties of nanobodies in comparison to conventional antibodies, which are based on their small size and offer a number of benefits, make them seem to have a promising future. These advantages include the ability to access complex or hidden target sites that may be elusive to their larger antibody counterparts, and increased resilience against extreme conditions like tempera-ture changes and pH variations. As a result, nanobodies seem to have a bright future as adaptable tools for imaging in cancer and non-malignant diseases, as well as for in vitro and in vivo diagnostic and therapeutic potential for a variety of conditions, including oncology, infectious, metabolic, neurological, and other conditions like ophthalmologic, immune-mediated, and genetic disorders. More research is required to determine their effectiveness and safety in clinical applications. The current analysis offers a thorough overview of the therapeutic uses for nanobody products that are either on the market or undergoing clinical trials.

Single parenting is a social phenomenon that has always been in existence and is as old as mankind, and today the number of single-parent families has been rampantly increasing. As a result, the researcher conducted a study in the Gambella region of Ethiopia to investigate the economic and educational implications of single parenting on female adolescent students. The study employed a qualitative research approach with a case study research design. The researchers used the purposive sampling technique to select the research area and research participants for in-depth interviews and focus group discussions, and eleven interviewees, seventeen participants in focus group discussions within two groups, and seven key informants participated. Interviews were audio-recorded, transcribed, translated, and thematically analyzed. Interviews with research participants revealed that adolescent girl students from single-parent homes experience financial difficulties. The study also explored that students with single parents are more likely to be absent from school, to come late to school, to score low marks, and to drop out of school. Therefore, having an understanding of the benefits of having intact parents for the well-being of adolescents and raising children together should be advocated.

In recent years, graphene has received so much attention because of its superlative properties and its potential to revolutionize electronics especially in VLSI. This study analyzes the effect of single event upset (SEU) in SRAM cell which employs metal-oxide semiconductor type graphene nano-ribbon field effect transistor (MOS-GNRFET) and compares the results respectively with another SRAM cell designed in PTM 10nm FinFET node. Our simulation show there is a change in data stored in the SRAM after heavy ion strike. However, it recovers from radiation effects after 0.46 ns for GNRFET and 0.51 ns for FinFET. Since the degradation observed in Q and Qb of GNRFET SRAM are 2.7X and 2.16X as compared to PTM nano-MOSFET, we can conclude that GNRFET is less robust to single effect upset. In addition, the stability of SRAM can be improved by increasing the supply voltage VDD.