Ischemia, the inadequate blood flow, can arise from pre-existing or traumatic events, remain an undetectable issue, and impact the body's ability to provide oxygen to necessary limbs, organs, muscles, or tissue. New technology involving wearable ultrasonic devices allows medical professionals to gain real-time insight into the cardiovascular system of their patients. A non-invasive, postage-stamp-sized ultrasonic sensor can be attached to a patient, allowing for continuous monitoring of the patient’s blood pressure outside of the hospital. After reviewing 16 papers on ultrasonic sensors, this paper intends to review the current use of wearable ultrasonic sensors and the advantages and limitations of the technology used to obtain accurate blood pressure readings. This review will bring attention to the evolving and expanding world of wearable ultrasonic sensors for medical applications.

Previous studies detail that the different blood groups are associate to incidence of oxidative stress-related diseases such as certain carcinomas. Bioactive compounds represent an alternative to prevent this oxidative-stress. The aim of this study was to elucidate the impact of blood groups on the erythroprotective potential of Fucoxanthin, β-Carotene, gallic acid, quercetin, and ascorbic acid as therapeutic agents against oxidative-stress. The impact of ABO blood groups on the erythroprotective potential was evaluate by the elucidated antioxidant capacity, blood biocompatibility, blood susceptibility and erythroprotective potential (membrane stabilization, in vitro photostability and antihemolytic activity). All antioxidant tested exhibited a highest potent antioxidant capacity and presented the ability to inhibit ROO•-induced oxidative-stress without compromising the cell membrane, providing an erythroprotective effect dependent on the blood group. Effect that increased in the presence of antigen A. This result could be key to the prevention of carcinomas associated with antigen A, such as breast and skin cancer. These results revealed a probable relationship between the different erythrocyte antigens with the erythroprotective potential, highlighting the importance of bio-targeted drugs for groups mostly susceptible to certain chronic-degenerative pathologies. These compounds could be applied as additive, nutraceutical or encapsulated to improve its bioaccessibility.

Background and Objectives: Similar to diabetes, the presence of left ventricular (LV) diastolic function (DD) has been reported in various studies which were conducted with people with a diagnosis of impaired fasting blood glucose (FBG). The study aimed to examine the effects of fasting blood glucose (FBG) levels on left atrial strain (LAS) estimated by two-dimensional echocardiography speckle tracking analyses in patients without known diabetes. Material and Methods: The study included 148 participants (74 female and 74 male) without a history of diabetes mellitus or chronic disease. The patients were divided into two groups as follows: individuals with FBG <100 mg/dl and those with FBG between 100-125 mg/dl after at least 8 hours of overnight fasting and according to these FBG levels STE measures were compared. Results: There was a significant decrease in the LA reservoir (52.3±15 vs. 44.5±10.7; p=0.001) and conduit strain (36.9±11.7 vs. 28.4±9.7; p=0.001) in the impaired FBG group. When the STE findings of both ventricles were compared, no significant difference was observed between the groups in right and LV strain imaging. Conclusion: In the earliest stage of LVDD, changes in atrial functional parameters become particularly evident. Echocardiographic analyses of these parameters can help to diagnose and determine the degree of LVDD while the morphological parameters are still normal. The addition of LAS imaging to the routine TTE study in patients with impaired FBG but without a DM diagnosis may be helpful in demonstrating subclinical LVDD or identifying patients at risk for LVDD in this patient group.

Background: The mental state is important in the health/illness process. Including stress, depression and anxiety. Nature immersion therapies have been implemented as a valid method for reducing these disorders. The aim will evaluate the effect of forest intervention therapies on levels of stress, depression, and anxiety. Methods: We searched for randomized clinical trials related to stress, anxiety and depression levels. Risk of bias was assessed according to the guidelines of the Cochrane Handbook for International Systematic Reviews. Results: We identified and synthesized eight publications. Two studies for cortisol showed significant differences between the pre-test and post-test levels in the intervention groups. One study including Natural killer cells, that reported a significant decrease in the intervention group compared to the control group. Two studies used the Stress Response Inventory, indicated a significant reduction in stress levels in the intervention group compared to the control group. Regarding Restorative Out-come Scale, no significant differences were found. Three studies were selected for the evaluation of anxiety and depression levels according to the Positive and Negative Affect Schedule. Four studies used The Profile of Mood States scale; no significant difference was observed. Conclusions: There is limited evidence to recommend forest bathing for reducing these disorders.

The giant panda (Ailuropoda melanoleuca) is one of the most endangered species of land mammals and has significant academic research value worldwide. The evaluation of hematological parameters in giant pandas is important for assessing the physiological status of animals. This study collected blood samples from 12 healthy giant pandas from September 2018 to August 2020 under non-anesthetic conditions. The samples were then analyzed for basic blood indices and blood rheology, and normal values for hematological parameters and blood rheology under non-anesthetic conditions in giant pandas in Beijing area were obtained. The study confirmed the influence of age and season on hematological and biochemical parameters in captive giant pandas: hematological morphology, blood rheology, and serum enzymes showed seasonal variations, while age affected the changes in serum enzymes, serum protein content, and serum metabolite content. There are significant differences in blood indicators among different age groups of giant pandas, indicating variations in the overall metabolic processes and differences among pandas of different age groups. Seasonal variations showed a regulatory effect on blood rheology parameters and a negative effect on blood viscosity. Further research should be conducted to investigate whether factors such as season and climate cause environmental stress in captive giant pandas. The results obtained in this study aim to better protect the stability of the giant panda population and provide references for the appropriate feeding and medical care of captive giant pandas.

An aneurysm is a vascular malformation, it can be classified according to its location (cerebral, aortic); and according its shape (saccular, fusiform, and mycotic). The study of blood flow interaction with the aneurysms has gained attention from physicists an engineers in recent years. Shear stresses, oscillatory shear index (OSI), gradient oscillatory number (GON), and residence time had been used as potential variables to describe the hemodynamics as well as the origin and evolution of aneurysm. However, the causes of aneurysms and the hemodynamics conditions that promote the growth of these structures are still under debate. The present work presents numerical simulation on three aneurysms: 2 aortic and 1 cerebral. The results shows that the blood rheology is not relevant for aortic aneurysms, however, for cerebral aneurysm could play a relevant role in the hemodynamics. The turbulence models evaluated show equivalent results in both cases. Lastly, a simulation considering the fluid-structure interaction (FSI) shows that this phenomenon is the dominant factor for aneurysms simulation.

Background and Objectives: Jehovah's Witnesses (JW) reject the transfusion of blood components based on their religious beliefs even if they are in danger of harm or death. In cardiac surgery, this significantly reduces the margin of safety and leads to ethical conflicts. Informed consent should be carefully documented and the patient's family should be involved. This study aims to compare the postoperative course of JW who underwent major cardiac surgery with a similar population of non-Witnesses (NW). Patients and Methods: Demographic, procedural, and postoperative data of all consecutive JW who underwent cardiac surgery at our institution were obtained from the records. They were compared with a propensity score matched group of NW. Anemic JW were treated with erythropoietin and/or iron as needed. Cardiac surgery was performed by experienced surgeons using median sternotomy and cardiopulmonary bypass. Common blood-sparing techniques were routinely used. Periprocedural morbidity and mortality were statistically evaluated for both groups. Results: 32 JW and 64 NW were part of the matched dataset showing no demographic or procedural differences. EPO was used preoperatively in 34.4% and postoperatively in 15.6% of JW but not in NW. Preoperative hemoglobin levels were similar (JW, 8.09±0.99 mmol/l; NW, 8.18±1.06; p=0.683). JW did not receive any transfusions except for one who revoked, while NW transfusion rates were 2.5±3.1 units for red cells (p&lt;0.001) and 0.3±0.8 for platelets (p=0.018). Postoperative levels differed significantly for hemoglobin (JW, 6.05±1.00 mmol/l; NW, 6.88±0.87; p&lt;0.001), and hematocrit (JW, 0.29±0.04; NW, 0.33±0.04; p&lt;0.001) but not for creatinine. Early mortality was similar (JW, 6.3%; NW, 4.7%; p=0.745). There were more pacemakers and pneumonias in JW, while all other postoperative conditions were not different. Conclusions: Real-world data indicate that Jehovah's Witnesses can safely undergo cardiac surgery provided that patients are preconditioned and treated by experienced surgeons who use blood-saving strategies. Postoperative anemia is observed but does not translate into a worse clinical outcome. This is consistent with other studies.

Live-attenuated, oral rotavirus vaccines have significantly reduced rotavirus-associated diarrhoea morbidity and infant mortality. However, vaccine immunogenicity is diminished in low-income countries. We investigated whether maternal and infant intrinsic susceptibility to rotavirus infection via histo-blood group antigen (HBGA) profiles influenced rotavirus (ROTARIX®) vaccine-induced responses in Zambia. We studied 135 mother-infant pairs under a rotavirus vaccine clinical trial aged 6 to 12 weeks at pre-vaccination up to 12 months old. We determined maternal and infant ABO/H, Lewis, and secretor HBGA phenotypes, and infant FUT2 HBGA genotypes. Vaccine immunogenicity was measured as anti-rotavirus IgA antibody titres. Overall, 34 (31.3%) of children were seroconverted at 14 weeks, and no statistically significant difference in seroconversion was observed across the various HBGA profiles in early infant life. We also observed a statistically significant difference in rotavirus-IgA titres across infant HBGA profiles at 12 months though no statistically significant difference was observed between study arms. There was no association between maternal HBGA profiles and infant vaccine immunogenicity. Overall, infant HBGA was associated with RV-Vaccine immunogenicity at 12 months as opposed to early infant life. Further investigation into the low efficacy of ROTARIX® and appropriate intervention is key to unlocking full vaccine benefits for U5 children.

Emerging infectious disease threats are becoming more frequent due to various social, political and geographical pressures including increased human-animal contact, global trade, transportation and changing climate conditions. As a result, the threat that emerging agents can be spread by blood contact or transfusion of blood products also becomes increasingly problematic. Blood transfusion is essential in treating patients with anemia, blood loss, and other medical conditions. However, these lifesaving components can become a vector for spreading diseases, particularly to vulnerable populations. New methods have been implemented on a global basis for prevention of transfusion transmission via plasma, platelet, and whole blood products. Implementing proactive pathogen reduction methods can significantly reduce the likelihood of disease transmission via blood transfusion, even for newly emerging agents whose transmissibility and susceptibility are still being evaluated as they emerge. In this review, we consider the Mirasol PRT system for blood safety which is based on a photochemical method involving Riboflavin and UV light. We provide examples of how emerging threats such as Ebola, SARS-CoV-2, Hepatitis E, monkeypox and other agents have been evaluated in real time regarding effectiveness of this method for reducing the likelihood of disease transmission via transfusion. Keywords: transfusion; blood; pathogen reduction; emerging infectious diseases.

Chronic inflammation may have a detrimental impact on human health as it tends to result in cancer. In addition, it is often linked to different steps that participate in tumorigenesis, including cellular transformation, survival, promotion, invasion, proliferation, angiogenesis, and metastasis. Hence, inflammation predisposes cancer development and plays a vital role in promoting all tumorigenesis stages. Inflammation is caused by many factors, such as bacterial and viral infections, tobacco smoking, autoimmune diseases, obesity, asbestos exposure, and many others, increasing cancer risk. Moreover, cancer can be enhanced by mutations that proceed to cancer progression. Consequently, it leads to immunosuppression and provides a favorable background for tumor development. Although many studies address the question of relationships between inflammation and cancer development, little attention is paid to the link between inflammation and blood cancer. Therefore, the current study reviews the role of inflammation in cancer development, particularly in blood cancer. A meta-analysis research approach meets the research objective and answers the research question. The review results indicate that chronic inflammation directly relates to the development of many cancer types, blood cancer in particular.

Background: Hypertension is a condition of a person's blood pressure being at a level above normal, hypertension treatment can be done herbally using avocado leaves. Avocado leaves can lower blood pressure because they contain active substances, namely flavonoids and quercetin. This research was conducted in the working area of the Tilango Health Center. Objective: This study aims to determine the effect of giving boiled water of avocado leaves on reducing blood pressure in the elderly with hypertension. Methods: Design This study used a two-group quasi-experimental pre-test - post-test design. The sample is the elderly who have hypertension, amounting to 125 people with purposive sampling technique. The research instrument used a questionnaire. Results: Statistical test using T-Test on blood pressure before and after the intervention was given a significance value of 0.000 (p-value < 0.05 ). Conclusion : This study concludes that there is a significant effect between giving avocado leaf boiled water on reducing blood pressure in the elderly with hypertension in the working area of the Tilango Health Center.

Introduction: Leprosy, caused by Mycobacterium leprae is one of the oldest infectious diseases in human history and its eradication is linked to poverty control, lack of basic sanitation, the fragility of health, and education services. Objective: To evaluate the frequency of blood groups (ABO/Rh) and the sociodemographic and clinical profile of Angolan patients with Leprosy treated at the Anti-Tuberculosis and Leprosy Dispensary in Luanda, the capital city of Angola. Methodology: A descriptive, introspective, cross-sectional study with a quantitative approach was carried out with 102 patients of Luanda, in the second half of 2021. Results: Of the 102 patients included in the study, the majority belonged to the ORh+ group (51.9%), followed by the BRh+ group (27.4%) and ARh+ (18.6%), most were under 51 years of age ( 87.3%), with low education (54.9%), coming from urban areas (44.1%). As for clinical conditions, most had a multibacillary infection (93.1%), diagnosed mainly by smear microscopy (75.5%) without other infection (79.4%), some of them with complications (28.4%) and individuals with non-O blood group showed changes in the blood count. Conclusion: Leprosy seems to be common in ORh+ individuals, it continues to affect especially those residing in areas of population agglomerations and with low education, presenting itself as a multibacillary infection, where changes in the blood count are greater in non-O individuals.

Introduction: Blood transfusion involves the transfer of blood from donors to patients. A blood transfusion is carried out every 2 seconds in the US. It is made up of about 29000 units of red blood cells and is transfused every day in the US. When blood transfusion is done correctly, it can result in the saving of lives and the improvement of healthcare. However, it may also lead to immediate, late, delayed, and chronic complications. No previous studies have been conducted in Qatar to address this issue. Methods: This is a cross-sectional study intended to determine the knowledge, attitude, and practice toward blood transfusion among healthcare providers at Hamad Medical Corporation (HMC), which is the principal healthcare provider in Qatar. Participants between 18 and 25 years of age were selected for the research study. A 10-item online questionnaire that people can fill out on their own will be used to get the data needed for the analysis and meet the study's goals. Results: the analysis has indicated that facing negative reactions after blood transfusion and being worried about getting affected by any infection have a small positive association, with the specific values coming in at r = 0.317, p = 0.000. Fever after blood transfusion and feeling like refusing blood transfusion have a significant and moderate positive correlation, with the specific values coming in at r = 0.630 and p = 0.000. Conclusion: The findings of this study have helped us figure out how healthcare providers feel, what they know, and what they do during a blood transfusion.

The blood brain barrier (BBB) is an essential component in regulating and maintaining the homeostatic microenvironment of the central nervous system (CNS). During the occurrence and development of glioblastoma (GBM), BBB is pathologically disrupted with markedly increased permeability. Due to the obstruction imposed by the BBB, strategies currently employed for GBM therapeutics still obtain a very low success rate and lead to systemic toxicity. Moreover, chemotherapy could promote pathological BBB functional restoration, accompanied with a prominent decrease of intracerebral therapeutics transportion during GBM multiple administration, resulting in chemotherapy failure for GBM treatment. The effective delivery of therapeutics into the brain still faces with severe challenges. Regulation of pathological BBB for enhanced transporting of therapeutics across the barrier may provide new opportunities for effective and safe treatment of GBM. This article reviews the structure and function of BBB in physiological state, the mechanisms underlying BBB pathological fenestration during the development of GBM, and the therapeutic strategies of GBM based on BBB intervention and therapeutic drugs transporting across the BBB.

Herein, we describe a highly efficient, non-complicated, and non-organic procedure to overcome the negative effect of chemotherapeutic drugs on the quality of the extracted DNA by applying several modulations in cell washing, suspension, and lysis of cells treated with these drugs. In this protocol, 500µl were extracted from patients who received systemic sessions of chemotherapy. The validity of this protocol for digestion with restriction endonucleases and both conventional and real-time polymerase chain reaction were tested. This protocol proved obvious purity (1.8±0.02 and 2.1±1.2, for A_260/280 and A_260/230, respectively) and adequate yields (10±2.24) µg/100 ml. The positive results of validation experiments proved the validity of the extracted DNA for downstream applications of molecular biology. In addition to the proven efficiency of this protocol to extract DNA from normal samples, its validity was also confirmed from patients who were exposed to chemotherapy. This entails a novel approach to extract a molecular biology grade DNA without having inhibitors against enzymes used in digestion, amplification, and subsequent sequencing even after the systemic sessions with several doses of chemotherapy.

Malaria remains a life-threatening disease in many tropical countries. Honduras has successfully reduced malaria transmission as different control methods have been applied focusing mainly on indoor mosquitoes. The selective pressure exerted by the use of insecticides inside the households could modify the feeding behavior of the mosquitoes forcing them to search for available animal hosts outside the houses. These animal hosts in the peridomicile could consequently become an important factor in maintaining vector populations in endemic areas. Herein, we investigated the blood meal sources and Plasmodium spp. infection on anophelines collected outdoors in endemic areas of Honduras. Individual PCR reactions with species-specific primers were used to detect five feeding sources on 181 visibly engorged mosquitoes. In addition, a subset of these mosquitoes where chosen for pathogen analysis by a nested PCR approach. Most mosquitoes fed on multiple hosts (2 to 4), and 24.9% of mosquitoes were fed on a single host, animal or human. Chicken and bovine were the most frequent blood meal sources (29.5% and 27.5% respectively). The average human blood index (HBI) was 22.1%. None of the mosquitoes was found to be infected with Plasmodium spp. Our results show the opportunistic and zoophilic behavior of Anopheles mosquitoes in Honduras.

Circulating tumor DNA (ctDNA) in fluids has gained attention because ctDNA seems to identify tumor-specific abnormalities, which could be used for diagnosis, follow-up of treatment, and prognosis: the so-called liquid biopsy. Liquid biopsy is a minimally invasive approach and presents the sum of ctDNA from primary and secondary tumor sites. It has been possible not only to quantify the amount of ctDNA but also to identify (epi)genetic changes. Specific mutations in genes have been identified in the plasma of patients with several types of cancer, which highlights ctDNA as a possible cancer biomarker. However, achieving detectable concentrations of ctDNA in body fluids is not an easy task. ctDNA fragments present a short half-life, and there are no cut-off values to discriminate high and low ctDNA concentrations. Here, we discuss the use of ctDNA as a cancer biomarker, the main methodologies, the inherent difficulties, and the clinical predictive value of ctDNA.

Approximately 300 different types of blood groups are identified so far, the ABO and Rh antigens are still the clinically most significant and genetically most polymorphic of all human blood group systems to date. A total of 200 unrelated individuals from Uttar Pradesh were studied for the phenotype and allele frequency distribution of ABO and Rh (D) blood groups. In total 200 samples analyzed, phenotype B blood type has the highest frequency 36.5% (n=73), followed by O (34.5%; n=69), A (20.5%; n=41) and AB (8.5%; n=17). The O, A and B frequencies were 0.5849, 0.1571 and 0.2580 respectively. The overall phenotypic frequencies of ABO blood groups were B>O>A>AB. The variation in phenotypic frequencies between male and female might be due to small sample size of male sample. The allelic frequency of Rh-negative was 0.2.

Androgens are key for pubertal development of the mammalian testis, a phenomenon tightly linked to Sertoli cell maturation. In this review, we discuss how androgen signalling affects Sertoli cell function and morphology by concomitantly inhibiting some processes and promoting others that contribute jointly to the completion of spermatogenesis. We focus on the molecular mechanisms that underlie AMH inhibition by androgens at puberty, as well as on the role androgens have on Sertoli cell tight junction formation and maintenance and, consequently, on its effect on proper germ cell differentiation and meiotic onset during spermatogenesis.

Several common and functional genes are known to contribute to responsiveness to blood pressure (BP) therapy. BP therapy is typically guided by algorithms that do not include a patient’s genetic information. This study aimed to determine the impact of a multi-organ genetic panel on BP response to pharmacotherapy. Eighty-six patients completed one study visit consisting of a buccal swab collection, measurement of office BP, and a medical chart review for BP history. Genes analyzed included those that encode for one drug metabolizing enzyme, renal Na+ handling, vascular, and cardiac function. Relationships between genotype and control of BP (<140/<90), ∆ systolic BP, ∆ diastolic BP, and ∆ mean arterial BP were assessed. SLC12A3 resulted in a significant association between the target drug and the functional genotype for BP control (<140/<90 cut off) (p<0.05). Conversely, three of five renal genotypes were associated with BP control using 120/80 as a cut-off (p<0.05). Three of four cardiac genotypes were associated with the BP control at <140/<90, with one being statistically significant (position 49 of ADRB1). Only one vascular genotype was predictive of blood pressure control at <140/<90. We found a significant drop in mean BP from baseline in six genes, three important in the diuretic response and three in β-blockade (p<0.05 on target drug vs. not). These results demonstrate that a multi-gene panel for renal Na+ handling, vascular function, and cardiac output may influence the BP response to therapy, but larger studies with more statistical power are needed.

We evaluated the association of blood pressure with blood levels of cadmium, lead, and cadmium and lead together (cadmium+lead) in a representative sample of adolescents from Korea by use of 2010-2016 data from the Korean National Health and Nutrition Examination Survey (KNHANES). This cross-sectional study enrolled adolescents aged at 10-18 years-old who completed a health examination survey and had blood measurements of lead and cadmium. The association of adjusted mean differences in diastolic and systolic blood pressure with doubling of blood lead and cadmium were estimated by regression of blood pressure against log₂-transformed blood metals and their quartiles after covariate adjustment. Adjusted odds ratios for prehypertension were calculated for log₂-transformed blood levels of lead and cadmium and their quartiles. Our analysis of adolescents in Korea indicated that blood levels of lead and cadmium were not significantly associated with increased blood pressure or risk of pre-hypertension. However, the cadmium+lead level was associated with pre-hypertension. Previous studies showed that blood levels of lead and cadmium were associated with increased blood pressure and risk of hypertension in adult populations. We found no such effect in Korean adolescents, although the cadmium+lead level was associated with prehypertension. These differences may be because adolescents generally have lower levels of these blood metals or because adolescents only rarely have hypertension.

Background: Cord blood represents a link between intrauterine and early extrauterine development. Cord blood cells map an important time frame in human immune imprinting processes. It is unknown whether sex of the newborn affects the lymphocyte subpopulations in cord blood. Methods: 9 B and 21 T cell subpopulations were characterized by flow cytometry in human cord blood from 16 male and 21 female newborns, respectively. Results: Except for marginal zone B cells and transitional B cells, B cell count in all subsets was higher in cord blood of male newborns than in female newborns. Frequency of naive thymus negative Th cells was significantly higher in male cord blood whereas the remaining T cell subpopulations showed a higher count in cord blood of female newborns. Conclusion: Our study is the first revealing sex differences in B and T cell subpopulations of human cord blood. These results indicate that sex might have a higher impact for the developing immune system urging the need to expand research in this area.

On the basis of a stocktaking on PVC in Europe and on a current ECHA investigation report, we conclude that regulatory action at EU level is recommended. We support ECHA's regulatory proposals in the main, but come to a more comprehensive proposal for the phasing-out of PVC beyond the area of electrical installations. PVC stored in buildings and infrastructure to date amounts to around 160 million tonnes ("stock") and this mass is still increasing. Parts from the stock have entered the waste management sector for years and their mass is gradually increasing. Neither material, chemical nor energy recovery will be able to absorb these incoming quantities. We therefore come to the conclusion that PVC should be collected separately and disposed of in an infrastructure designed for chlorine recovery. The required infrastructure should be set up and operated by the chemical industry. So, PVC will lose its status as a particularly economically favorable plastic. In view of the constantly increasing stock, we recommend phasing-out the production of virgin PVC as early as possible. In our opinion, this would also be justifiable because the effects of the closed loop recycling announced by VinylPlus ('Vinyl') would go in the same direction.

Growing concerns about the greenhouse effect, global warming, and adverse climate changes primarily stemming from carbon dioxide (CO2) emissions in traditional Portland cement (OPC) used in civil engineering construction, have prompted a shift toward eco-friendly alternatives like geopolymer cement (GPC). Over the last few decades, significant advancements have been made in developing environmentally sustainable pavement construction materials such as GPC to mitigate global CO2 emissions. The success of geopolymer cement (GPC) as an eco-friendly alternative to OPC has garnered attention for its potential to lower carbon emissions and enhance durability. This is attributed to the sustainable production method of GPC, where industrial cementitious waste materials (such as fly ash (FA), metakaolin (MK), mine tailings (MT), slag, etc.) are combined with an eco-friendly alkaline activator and water through the geopolymerization process. Numerous studies on geopolymer concrete indicate that, like OPC, GPC exhibits comparable mechanical properties, including strength, fire resistance, chemical resistance, and durability. This review explores the properties and applications of GPC as a sustainable material in pavement construction, exploring key studies and advancements in geopolymer technology, particularly its suitability for pavement applications. The assessment covers the mechanical properties, long-term performance, and environmental impact of geopolymer-based pavements, providing a comprehensive overview to inform policymakers, engineers, and researchers about the viability of geopolymer-based materials as a sustainable solution for modern pavement construction.

Efficient heat management and control in optical devices, facilitated by advanced thermo-optic materials, is critical for many applications such as photovoltaics, thermal emitters, mode-locked lasers, and optical switches. Here, we investigate the thermo-optic properties of 2D graphene oxide (GO) films by precisely integrating them onto microring resonators (MRRs) with control over the film thicknesses and lengths. We characterize the refractive index, extinction coefficient, thermo-optic coefficient, and thermal conductivity of for the GO films with different layer numbers and degrees of reduction, including reversible reduction and enhanced optical bistability induced by photo-thermal effects. Experimental results show that the thermo-optic properties of 2D GO films vary widely with the degree of reduction, with significant polarization anisotropy, enabling efficient polarization sensitive devices. The versatile thermo-optic response of 2D GO substantially expands the scope of functionalities and devices that can be engineered, making it promising for a diverse range of thermo-optic applications.

Negative temperature coefficient (NTC) materials are usually based on ceramic semiconductors and electrons are involved in their transport mechanism. A new type of NTC material, adequate for alternating current (AC) applications, is represented by zeolites. Indeed, zeolites are single-charge carrier ionic conductors with a temperature-dependent electrical conductivity. In particular, electrical transport in zeolites is due to the monovalent charge-balancing cations, like K⁺, capable of hopping between negatively charged sites in the aluminosilicate framework. Owing to the highly non-linear electrical behavior of the traditional electronic NTC materials, the possibility to have alternative types of materials, showing linearity in the electrical behavior, is very desirable. Among different zeolites, the natural clinoptilolite has been selected for investigating the NTC behavior since it is characterized by high zeolite content, convenient Si/Al atomic ratio, good mechanical strength, due to its compact microstructure, and low toxicity. Clinoptilolite has shown a rapid and quite reversible impedance change under heating, characterized by a linear dependence on temperature. X-ray diffraction (XRD) has been used to identify the natural zeolite, to establish all types of crystalline phases present in the mineral, and to investigate the thermal stability of these phases up to 150°C. X-ray photoelectron spectroscopy (XPS) analysis has been used for the chemical characterization of the natural clinoptilolite sample, providing important information on the cationic content and framework composition. In addition, since electrical transport takes place in the zeolite free-volume, a Brunauer–Emmett–Teller (BET) analysis of the mineral has been also performed.

For many engineering applications it is sufficient to use the concept of simple materials. However, higher gradients of the kinematic variables are taken into account to model materials with internal length scales as well as to describe localization effects using gradient theories in finite plasticity or fluid mechanics. In many approaches length scale parameter have been introduced that are related to a specific micro structure. An alternative approach is possible, if a thermodynamically consistent framework is used for material modelling as shown in the present contribution. However, even if sophisticated and thermodynamically consistent material models can be established there are still not yet standard experiments to determine higher order material constants. In order to contribute to this ongoing discussion system identification based on the method of self-adaptive filtering is proposed in this paper. To evaluate the effectiveness of this approach it has been applied to second-order gradient materials considering longitudinal vibrations. Based on thermodynamically consistent models that have been solved numerically it has been possible to prove that system identification based on self-adaptive filtering can be used effectively for both narrow-band and broadband signals in the field of second-order gradient materials. It has also been found that the differences identified for simple materials and gradient materials allow for condition monitoring and detection of gradient effects in the material behavior.

The main purpose of this study was to design a workplace in the conditions of a digital factory. The goal of this study is to compile a proposal for improving the layout solution in the selected enterprise to reduce material flows between individual workplaces. In addition, the workplace research study uses methods of material flow analysis with the application of visTABLE software support, which serves as a tool for designing production processes. The main result of the study was the reduction of the production time of the beam by 10 minutes and the creation of proposals for solutions for the company. The study helped with the visualization of processes within the digital factory to simplify and clarify processes at the workplace.

Knowing the mechanical properties of fibrous composite materials used in aeronautical industry from the design phase is a primary objective for designers. There are many methods for determining them, but they are laborious and require a long calculation time. And some of the methods are very approximate, giving only upper and lower bounds for these values. Experimental measurements also consume time and others resources. A method for sufficiently accurate and quickly obtained estimation of the engineering constants of the homogenized material is presented in the work. FEM is used to determine the natural frequencies of a standard bar, for which there are sufficiently precise classical methods for expressing these constants according to the properties of the homogenized material. In this way, these sought constants can be determined. In the work, Young's modulus will be determined for such a material, using the relationships that provide the proper pulsations for the longitudinal vibrations. Within the adopted model, transverse and torsional vibrations will be eliminated by blocking the nodes on the surface of the bars. In this way, more longitudinal self-pulsations can be obtained, so the precision in calculating the Young's modulus will increase.

The study covered the leaves of 25 varieties of highbush blueberry Vaccinium corymbosum L. Determinations were performed for phenolic acid (chlorogenic, neochlorogenic, cryptochlorogenic, 3,5-dicaffeoylquinic and 4,5-dicaffeoylquinic acids), flavonoid (catechin, rutin, isoquercetin), arbutin and hydroquinone content. The content of phenolic acids and flavonoids in the test material suggests that highbush blueberry leaves can be a potentially good material for dietary supplement production, although the relatively high arbutin content (exceeding 4% in the case of the Bonus, Chantiklee and Herbert varieties) limits this possibility to herbal medicinal products applied in case of health issues for a limited time, similar to other over-the-counter arbutin products (bearberry Arctostaphylos uva-ursi and lingonberry Vaccinium vitis-idaea leaves).

The recycling of wastes to obtain value-added products is a great challenge in the sustainable economy. In our studies, a mixed precursor containing aluminium scrap from end – of – life vehicles and TiO2 Degussa P25 was used to prepare TiO2 modified Al photocatalyst through solid state reaction. Al scrap and TiO2 Degussa P25 in the ration of n(Ti) / n(Al) = x (x = 0.0 - 2.5%), and acetylacetonate and Tween 80 was mixed under magnetic stirring and sintered using a con-ventional furnance at 550°C. DTA – TG – DTG, X – ray diffraction, Fourier – transform infrared, UV – Vis and photoluminescence spectroscopies were assed to investigate the thermal, structural, optical properties and photocatalytic activity. The effect of aluminium concentration on the characteristics of TiO2 Degussa P25 depending on the above instruments are studied. XRD revealed that the materials have crystal structure of anatase TiO2, rutile TiO2 and aluminium. The opto-electronic properties show that Al addition shifted the absorption spectra toward the visible range. The photocatalytic performance of Al – TiO2 composites was quantified by the degradation of Allura Red solution under a visible condition. The highest photocatalytic activity (79.99%) was achieved for the sample containing 0.5% Al and a higher concentration of Al particles shields the active centres of the semiconductor, thus reducing its photocatalytic activity. Aluminium scrap from end-of-life vehicles can be a source of raw material to be considered in semiconductor production. The spin-trapping technique evidenced that •O2- was the main species generated responsible for the Allura Red degradation.

The present work sets out the evaluation of composite laminates through optimization objective functions. Genetic Algorithms (GA), as well as Simulated Annealing (SA), were performed in order to determine the optimal ply orientations of a fiber-reinforced polymer laminate for three given load cases: 1) in-plane loads, 2) combined moments, and 3) in-plane loads and combined moments. It searches the optimal orientation layup, which fulfills at the same time both the maximum strain criterion and the Tsai-Wu failure criterion. Construction of an objective function based on the strains and the stresses involves a minimization process to deformations and a maximization of the safety factor. For the first load case, the initial solution is [±45/0/90/±45]s, and the best solution is [(45/135)2/452]s. For the second load case, [-45/45/45/-45/0/90]s is the initial layup sequence, then the best solution obtained is [(45/-45)2/452]s, where plies at 0° and 90º are not necessary even when axial loads are applied. For the third study case, the original layup sequence is [0/45/-45/45/0/90]s; meanwhile, the best solution calculated is [21/24/145/140/45/49]s. An interesting observation is that each pair of layers has a 5º gap. The simulations show that the qualitative results from the GA are better than the SA, but with a significantly higher computational cost. These kinds of computational tools are expected to be used as a reference guide for an optimal fiber configuration with respect to the common orientations used when composite laminates are designed for a structural application.

The fermentation of syngas is an attractive technology that can be integrated with gasification of lignocellulosic biomass. The coupling of these two technologies allows for treating a great variety of raw materials. Lignin usually hinders microbial fermentations; thus, the thermal decomposition of the whole material into small molecules allows for the production of fuels and other types of molecules using syngas as substrate, a process performed at mild conditions. Syngas contains mainly hydrogen, carbon monoxide and carbon dioxide in varying proportions. These gases have a low volumetric energy density, resulting more interesting its conversion into higher energy density molecules. Syngas can be transformed by microorganisms, thus avoiding the use of expensive catalysts, which may be subject to poisoning. However, the fermentation is not free of suffering from inhibitory problems. The presence of trace components in syngas may cause a decrease in fermentation yields or cause a complete cessation of bacteria growth. The presence of tar and hydrogen cyanide are just examples of this fermentation's challenges. Syngas cleaning impairs significant restrictions in technology deployment. The technology may seem promising, but it is still far from large-scale application due to several aspects that still need to find a practical solution.

Concrete is a heterogeneous material, one of the most widely used materials on the Planet and a major consumer of natural resources. Carbon emissions are largely due to the extensive use of cement in its composition, which contributes to 7% of global CO2 emissions. Extraction and processing of aggregates is another sources of CO2 emissions. Many countries have succeeded in moving from a linear economy to a circular economy by partially or fully replacing non-renewable natural materials with alternatives from waste recycling. One such alternative consists in partially replacing cement by supplementary cementitious materials (SCMs) in concrete mixes. Thus, the work is based on the experimental investigation of the fresh and hardened properties of civil engineering concrete, hereafter referred to as road concrete, in which, crushed river aggregate have been replaced with recycled waste aggregates of uncemented concrete and partial replacement of cement with a SCM material in the form of glass powder that improves the durability characteristics of this sustainable concrete. The microstructure and compositional features of the selected optimum composite has been also investigated by polarized light optical microscopy (OM) Scanning electron microscope (SEM) and X-ray diffraction by the Powder method (PXRD) for the qualitative analysis of crystalline constitutive materials.

Paraffin wax stores energy in the form of latent heat at a nearly constant temperature during melting and releases this energy during solidification. This effect is used in industrial energy storage. An unusual change in the shape of a melted droplet of paraffin wax placed on a relatively cold glass plate is studied. As the droplet solidifies, its upper surface becomes nearly flat and a dimple is formed in the center of this surface, making the droplet look like a fruit (pumpkins are more commonly shaped like this, but the authors prefer apples). A series of experiments, as well as physical and numerical modeling of the droplet's thermal state, taking into account the formation of a mushy zone between liquidus and solidus, made it possible to understand the role of gravity and gradual increase in viscosity and density of paraffin wax on changing the droplet shape and, in particular, to clarify the mechanism of formation of the dimple on its upper.

Iapetus, a Saturn moon, shows the most differentiated albedo dichotomy of the Solar System. The dark leading side has a lower albedo than the bright trailing side. Spectral data on the visible light reveal the existence of two types of materials on the surface. The darkening in the leading side is thought to be originated by the presence of organic material and carbonaceous compounds on surface, while the trailing side is covered by water ice due to migration processes from the dark side. On airless bodies like Iapetus, the surface escape speed is greater than the speed of water molecules, resulting in the retention of a H2O atmosphere that allows some species to get diffused through it. Here, there were performed simulations of the evolution of the surface temperature for each of the two hemispheres of Iapetus. The results showed a slow yet steady increment of temperatures for both sides, with a steeper slope for the dark hemisphere. It was also simulated how much energy budget can be accumulated in both sides and its consequences. Finally, we calculated the diffusion coefficients for ammonia, methane, and water ice. The results let us infer how these compounds could evolve over time.

In order to study the performance of a new type of cement-based grouting material under the coupling effect of freezing-thawing cycle and sulfate attack, experiments were designed and carried out. The damage mechanism of the material under the coupling effect of freezing-thawing and Na2SO4 solution was analyzed by measuring the mass change, relative dynamic elastic modulus, compressive strength loss and microstructure of the new grouting material. With increasing freeze-thaw cycles, mass loss and compres-sive strength loss of the sample in 15% Na2SO4 solution gradually increase, and the relative dynamic elastic modulus gradually decreases. During a 30-cycle freeze-thaw cycle, the mass loss rate, compressive strength loss rate, and relative dynamic elastic modulus of the sample are 4.17%, 24.59%, and 84.3%, respectively, showing good corrosion resistance and frost resistance durability. Microscopic analysis showed that SO42- caused the decomposition of C-S-H gel in the sample and the formation of Gypsum, and the widening of crack width aggravated the internal deterioration, indicating that the material deterioration rate increased under the dual-factor coupling effect.

The paper analyzes the phenomenon that condition the durability and reliability of a type of dental bur based on the wear of the active part and with effect on its quality. For the experimental study, a conical-cylindrical dental bur and a sample dental material in cobalt-chromium alloy, cylindrical shape, tested on a specially made experimental installation were used. The paper was limited to the consideration of a single parameter (loss of mass, mw by wear of the active part of the dental bur tested) for the establishment the durability and reliability, useful for the extension of the lifetime or even optimization of its operation. The wear phenomenon of the active part of dental bur is studied based on the results and experimental data obtained in the work process that was validated by interpolation and led to polynomial functions which approximate very well the dependent parameter, mw, considered in the experimental program. The results of the interpolation showed that in the first 11 h of work, the dental bur works with high efficiency, after which it can be easily decommissioned (optimizing operation, possibly constructive solutions); i.e., it should be replaced with a new one (criterion for replacing of worn dental bur).

One of the most popular techniques for determining electrical properties of material is the free-space measurement technique. With the potential for new applications requiring efficient, accurate and broadband material measurement systems using higher millimeter-wave and terahertz frequencies, the free-space measurement method has received renewed interest. This is mainly due to its simplicity, favorable properties as a non-destructive method, and it allows transmission and reflection measurements without any physical contact with the sample. This paper reviews and discusses state- of-the-art free space material measurement systems, starting with the different measurement techniques available for material characterization, their important concepts, post-processing in determining their properties, and progress towards expanding their use at higher frequencies. Also, this paper reviews dielectric material characterization using the free space method focusing on their application extension towards the higher frequencies. Besides, the algorithms for conversion methods and usage of lens in free space material measurement system was discussed in this paper. Finally, a future perspective on the outlook of this free space method is presented prior to the conclusion.

Several methods of processing wood into strong, durable products for the construction industry provide transformative opportunities to substitute for less sustainable building materials. Carbon storage is a further advantage, with the added possibility of combustion for bioenergy at end of life. Intense research activity in this area is expected to open up new markets for wood fiber during the lifetime of trees now being planted. Here, wood-derived materials are classified according to the particle size, from metres to nanometres, into which the wood is fragmented before reconstitution. Materials made by densifying or chemically modifying solid wood with no fragmentation are already in production for exterior doors, window frames and cladding, with improved uniformity and stability compared with unmodified wood. Pre-commercial developments promise further gains in durability and strength. Emerging developments extend these process technologies to wood that has been chipped or stranded or pulped, retaining the above advantages over raw timber for weather-facing applications and adding processability by moulding or extrusion. Crucially, the raw material does not then need to be sawn timber but can be bioenergy-grade wood biomass. This will facilitate afforestation strategies that combine the aims of carbon sequestration and biodiversity.

High-performance anodes are contributed to nanostructure of transition metal oxides for rechargeable Li-ion batteries (LIBs). In this work, we report the fabrication of high-performance anode materials for lithium-ion batteries, MnO2 nanotube directly grown into fabrics of carbon nanofibers, the MnO2/Carbon nanofibers (CNFs) were investigated by X-ray diffraction, scanning and transmission electron microscopies. When tested as the anode material in LIBs, the MnO2/CNFs exhibit superior performance and excellent long cycling performance with a reversible capacity of 835 mA h g-1 at 0.1 A g-1 after the 133 th cycle, a high initial specific capacity of 1094 mA h g-1 at a current density of 0.1 A g-1. The MnO2/CNFs demonstrates notable specific capacities, specifically, with a coulombic efficiency of 99.5 %, both stability and capacity are conspicuously above literature data. These impressive results indicate that MnO2/CNFs has great potential for high-energy and high-power energy storage applications.

Manual material handling tasks in industry cause work-related musculoskeletal disorders. Exoskeletons are being introduced to reduce the risk of musculoskeletal injuries. This study investigated the effect of using a passive lumbar exoskeleton in terms of moderate ergonomic risk. Eight participants were monitored by electromyogram (EMG) and motion capture (MoCap) while performing tasks with and without the lumbar exoskeleton. The results showed a significant reduction in the root mean square (VRMS) for all muscles tracked: erector spinae (8%), semitendinosus (14%), gluteus (5%), and quadriceps (10.2%). The classic fatigue parameters showed a significant reduction in the case of the semitendinosus: 1.7% zero-crossing rate, 0.9% mean frequency, and 1.12% median frequency. In addition, the logarithm of the normalized Dimitrov’s index showed reductions of 11.5, 8, and 14% in erector spinae, semitendinosus, and gluteus, respectively. The calculation of range of motion in the relevant joints demonstrated significant differences, but in almost all cases, the differences were smaller than 10. The findings of the study indicate that the passive exoskeleton reduces muscle activity and introduces a minor change of strategies for motion. Thus, EMG and MoCap appear to be appropriate measurements for designing an exoskeleton assessment procedure.

Molecularly imprinted polymers (MIPs) have been widely used in nanomedicine during the last few years. However, their potential is limited by their intrinsic properties resulting, for instance, in lack of control in drug release processes or complex detection for in vivo imaging. Recent attempts in creating hybrid nanomaterials combining MIPs with inorganic nanomaterials succeeded in providing a wide range of new interesting properties suitable for nanomedicine. Through this review, we aim to illustrate how hybrids molecularly imprinted polymers may improve patient care with enhanced imaging, treatments and combination of both.

In this work, fluorinated graphene nanoscrolls (FGN) were synthesized via facile chemical methods under simple and mild conditions. Interestingly, the formation of the featured FGN was significantly solvent sensitive. Experimental results indicated that in the presence of aprotic solvent, for example, N,N dimethylformamide (DMF), the reaction system inclined to form the interesting FGN nanostructures. The structure and morphology of the prepared FGN were detailed characterized by atomic force microscopy (AFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD) etc. The obtained FGN was used as a cathode material for primary lithium ion batteries with superior discharge specific capacity (eg. 979.3 mAhg-1), stable discharge platform and high energy density (eg. 2287.9 Wh kg-1), which fosters it a high density, low cost and durable candidate for cathode material for lithium ion batteries..

An equilibrium problem of the Kirchhoff-Love plate containing a nonhomogeneous inclusion is considered. It is assumed that elastic properties of the inclusion depend on a small parameter characterizing width of the inclusion $\varepsilon$ as $\varepsilon^N$ with $N<1$. The passage to the limit as the parameter $\varepsilon$ tends to zero is justified, and an asymptotic model of a plate containing a thin inhomogeneous hard inclusion is constructed. It is shown that there exists two types of thin inclusions: rigid inclusion ($N<-1$) and elastic inclusion ($N=-1$). The inhomogeneity disappears in the case of $N\in (-1,1)$.

Carbonaceous material (CM) is common in meta-sediments and is generally interpreted to be intimately associated with gold mineralization. For the Bumo deposit in Hainan Province, South China, CM is mainly hosted by greenschist facies- to amphibolite-facies metamophic rocks of the Paleo- to Mesoproterozoic Baoban Group and by auriferous veins and is used as an important gold prospecting indicator. However, the genesis of CM and the relationship with gold mineralization are still not clear. Field work and thin section observation indicates that two types of CM occur, i.e., layered and veinlet. Layered CM, up to meters thick, prevails in the deposit. More importantly, Au-bearing sulfides are commonly distributed along the boundary between the quartz veins and layered CM. In contrast, veinlet CM, co-precipitated with gold and sulfides, has the thickness of micro- to centi- meters, and these thin veins occur in quartz veins and hydrothermally altered rocks. Scanning Electron Microscope (SEM) analysis indicates that layered CM has a stringy shape and laminate structure, while veinlet CM occurs as isometric particles. Raman carbonaceous material geothermometer indicates that layered CM with high maturity is formed at elevated temperatures of 400 – 550°C, consistent with X-ray diffraction (XRD) analysis. In contrast, veinlet CM with low maturity is formed at 200 – 350°C, generally consistent with gold mineralization. In addition, layered CM has δ13C values ranging from -30 to -20%, demonstrating a biogenic origin. Consequently, it is interpreted that layered CM is formed by a pre-ore metamorphic event during Caledonian, and its reducing nature promotes gold precipitation via destabilization of aqueous Au bisulfide complexes or facilitating sulfidation. Veinlet CM is hydrothermal origin, and its precipitation modified the chemical conditions of ore fluids, leading to the destabilization of Au complexes and thus favorable for mineralization.

In the last decade, the drone market has grown rapidly for both civil and military purposes. Due to their versatility, drones demand is constantly increasing, with several industrial players joining the venture to transfer urban mobility to the air. This has exacerbated the problem of noise pollution, mainly due to the relatively lower altitude of these vehicles and to the proximity of their routes to extremely densely populated areas. In particular, both the aerodynamic and aeroacoustic optimization of the propulsive system and of its interaction with the airframe are key aspects of the design of aerial vehicles for the success or the failure of their mission. The industrial challenge involves finding the best performance in terms of loading, efficiency and weight, and, at the same time, the most silent configuration. For this reason, research has focused on an initial localization of the noise sources and, on further analysis, of the noise generation mechanism, focusing particularly on directivity and scattering. The aim of the present study is to review the noise source mechanisms and the state-of-the-art technologies available in literature for its suppression, focusing especially on the fluid-dynamic aspects of low Reynolds numbers of the propulsive system and on the interaction of the propulsive-system flow with the airframe.

Thermophysical characterization of three paraffin waxes (RT27, RT21 and RT35HC) is carried out in this study using DSC, TGA and transient plane source technics. Then, a numerical study of their melting in a rectangular enclosure is examined. The enthalpy-porosity approach is used to formulate this problem in order to understand the heat transfer mechanism during the melting process. The analysis of the solid-liquid interface shape, the temperature field shows that the conduction is the dominant heat transfer mode in the beginning of the melting process. It is followed by a transition regime and the natural convection becomes the dominant heat transfer mode. The effects of the Rayleigh number and the aspect ratio of the enclosure on the melting phenomenon are studied and it is found that the intensity of the natural convection increases as the Rayleigh number is higher and the aspect ratio is smaller. In the second part of the numerical study, a comparison of the performance of paraffins waxes during the melting process is conducted. Results reveals that from a kinetically RT21 is the most performant but in term of heat storage capacity, it was inferred that RT35HC is the most efficient PCM.

Sodium substitution Li1-xNaxMn2O4 cathodes were synthesized by a solid-state reaction method. The morphologies and crystal structures of Li1-xNaxMn2O4 were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. All Li1-xNaxMn2O4 samples exhibited a single phase LiMn2O4 spinel structure with good crystallinity. The effect of Na+ ions on the electrochemical performance of Li1-xNaxMn2O4 was investigated by galvanostatic charge-discharge test. The results showed that lithium substituted by sodium deteriorated its capacity retention but enhance its discharge capacity when it worked at large current densities. The initial discharge capacity was 114.2 mAh/g for Li0.94Na0.06Mn2O4, and 93.1 mAh/g remained after 300 cycles at a current density of 2220 mA/g in the voltage range 3.0–4.3 V at room temperature.

In this work a research on pulsed electrochemical micromachining of Stainless Steel is presented. A suitable equipment to study the process is described as well as a fitting procedure to machine and measure the variables involved. A tool of Tungsten with a tip of about 5 mm diameter sunk in an electrolyte of NaNO₃ is used for the process. The pulse on-time must be maintained in the order of ns to achieve a good current confinement, since the tool is active. Some experiments were made to assess the most important variables of the process, as current confinement, surface roughness, material removal rate and efficiency. It is observed that the current confinement get worse when the pulse on-time increases, as well as surface roughness. The material removal rate and the efficiency increase with the voltage amplitude and the pulse on-time. The voltage amplitude must be higher than 12 V so that the phenomenon of passivation disappears. There is a compromise in the choice of the variables, so a suitable combination of parameters is determined so that a good material removal rate with an acceptable result is achieved.

Material efficiency is a key element of new thinking to address the challenges of reducing impacts on the environment and of resource scarcity, whilst at the same time meeting service and functionality demands on materials. Directly related to material efficiency is the concept of the Circular Economy, which is based on the principle of optimising the utility embodied in materials and products through the life cycle. Whilst steel, as a result of high recycling rates, is one of the most ‘circular’ of all manufactured materials, significant opportunities for greater material efficiency exist, which are yet to be widely implemented. In the field of Life Cycle Management, Life Cycle Assessment (LCA) is commonly used to assess the environmental benefits of recovering and recycling materials through the manufacturing supply chain and at end-of-life. As well as containing information to calculate environmental impacts, LCA models also provide the flows of materials through the product life cycle and can also be used to quantify material efficiency and the circularity of a product system. Using an example taken from renewable energy generation, this paper explores the correlation between product circularity and the environmental case for strategies designed to improve material efficiency. An LCA-based methodology for accounting for the recovery and re-use of materials from the supply chain, and at end-of-life, is used as the basis for calculating the carbon footprint benefits of five material efficiency scenarios. Resulting carbon footprints were then compared with a number of proposed material circularity indicators. Two conclusions from this exercise were that i) LCA methodologies based around end-of-life approaches are well placed for quantifying the environmental benefits of material efficiency and circular economy strategies and ii) when applying indicators relating to the circularity of materials these should also be supported by LCA studies.

Carbonous nanomaterials are promising additives for composite coatings for heat-dissipation materials because of their excellent thermal conductivity. Here, copper/carbonous nanomaterial composite coatings were prepared using nanodiamond (ND) as the carbonous nanomaterial. The copper/ND composite coatings were electrically deposited onto copper substrates from a continuously stirred copper sulfate coating bath containing NDs. NDs were dispersed by ultrasonic treatment, and the initial bath pH was adjusted by adding sodium hydroxide solution or sulfuric acid solution before electrodeposition. The effects of various coating conditions—the initial ND concentration, initial bath pH, stirring speed, electrical current density, and the amount of electricity—on the ND content of the coatings were investigated. Furthermore, the surface of the NDs was modified by hydrothermal treatment to improve ND incorporation. A higher initial ND concentration and a higher stirring speed increased the ND content of the coatings, whereas a higher initial bath pH and a greater amount of electricity decreased it. The electrical current density showed a minimum ND content at approximately 5 A/dm². Hydrothermal treatment, which introduced carboxyl groups onto the ND surface, improved the ND content of the coatings. A copper/ND composite coating with a maximum of 3.85 mass% ND was obtained.

Abstract: The brain endothelial cell (BEC) glycocalyx (ecGCx) is a BEC surface coating consisting of a complex interwoven polysaccharide (sweet husk) mesh-like network of membrane-bound proteoglycans, glycoproteins, and glycosaminoglycans (GAGs) covering the apical luminal layer of the brain endothelial cells. The ecGCx may considered as the 1st barrier of a tripartite blood-brain barrier (BBB) consisting of 1) ecGCx; 2) BECs; (3) extravascular compartment of pericytes, extracellular matrix, and perivascular astrocytes, Perturbations of this barrier allow for increased permeability in the postcapillary venule that will be permissive to both fluids, solutes, and proinflammatory peripherally-derived leukocytes into the perivascular spaces (PVS) to result in enlargement as well as increased neuroinflammation. The ecGCx is known to have multiple functions, which include its physical and charge barrier, mechanical transduction, regulation of vascular permeability, modulation of inflammatory response, and anticoagulation functions. This review discusses each of the listed functions in detail and utilizes multiple transmission electron micrographs and illustrations to allow for a better understanding of the ecGCx structural and functional roles as it relates to enlarged perivascular spaces (EPVS). This is the 5th review of a series quintet that discuss the importance of EPVS from the perspective of the cells of brain barriers. Attenuation and/or loss of the ecGCx results in brain barrier disruption with increased permeability to proinflammatory leukocytes, fluids and solutes, which accumulate in the postcapillary venule perivascular spaces. This accumulation results in obstruction and results in EPVS with impaired waste removal of the recently recognized glymphatic system. Importantly, EPVS are progressively being regarded as a marker of cerebrovascular and neurodegenerative pathology.

Deep Learning (DL) has made significant advances in computer vision with the advent of Vision Transformers (ViT). Unlike Convolutional Neural Networks (CNNs), ViTs use self-attention to extract both local and global features from image data, and then use residual connections to feed these features directly into a fully networked multilayer perceptron head. In hospitals, hematologists prepare peripheral blood smears (PBSs) and read them under a medical microscope to detect abnormalities in blood counts such as leukemia. However, this task is time-consuming and prone to human error. This study investigates the transfer learning process of Google ViT and ImageNet CNNs to automate the reading of PBSs. The study used two online PBS datasets, PBC and BCCD, and transferred them into balanced datasets to investigate the influence of data amount and noise immunity on both neural networks. The PBC results show that Google ViT is an excellent DL neural solution for data scarcity. The BCCD results show that Google ViT is superior to ImageNet CNNs in dealing with unclean, noisy image data because it is able to extract both global and local features and use residual connections, despite the additional time and computational overhead.

In this study, we aimed to identify blood lymphocytes as a prognostic factor for survival in patients with locally advanced stage III non-small cell lung cancer (NSCLC) treated with concurrent chemoradiotherapy (CCRT). We conducted a secondary analysis of 196 patients enrolled in the Korean Radiation Oncology Group 0903 phase III clinical trial to evaluate the prognostic significance of circulating blood lymphocyte levels. The median total lymphocyte count (TLC) reduction ratio during CCRT was 0.74 (range: 0.29 – 0.97). In multivariate analysis, patient age (p = 0.014) and gross tumor volume (GTV, p = 0.031) were significant factors associated with overall survival, while TLC reduction (p = 0.018) and pretreatment neutrophil-to-lymphocyte ratio (NLR; p = 0.010) were associated with progression-free survival (PFS). In multivariate logistic regression analysis, pretreatment NLR, GTV, and heart V20 were significantly associated with TLC reduction. TLC reduction during CCRT is a significant prognostic factor for PFS, and heart V20 is significantly associated with TLC reduction. Thus, constraining the volume of the radiation dose to the whole heart must be prioritized to reduce TLC.

This study compared growth performance, serum biochemical indicators, rumen fermentation parameters, rumen bacterial structure, and fecal bacterial structure of cattle and yaks, fed for two months, given a feed containing concentrate to roughage ratio of 7: 3 on dry matter basis. Compared with cattle, yak showed better growth performance. The serum biochemical results showed that the albumin: globulin ratio in yaks serum was significantly higher than that in cattle. Aspartate aminotransferase, indirect bilirubin, creatine kinase, lactate dehydrogenase and total cholesterol were significantly lower in yaks than that in cattle. Rumen pH, acetate to propionate ratio, and acetate were lower in yaks than in cattle while the lactate in yaks was higher than in cattle. There were significant differences in the structure of ruminal as well as fecal bacteria between cattle and yaks. The prediction of rumen bacterial function showed that there was metabolic difference between cattle and yaks. In general, the metabolic pathway of cattle was mainly riched in de novo synthesis of nucleotides, while that of yaks was mainly riched in the metabolic utilization of nutrients. This study provides a basis for understanding the rumen ecology under the condition of high concentrate diet.

Consumption of high amounts of ethanol is a risk factor for development of cardiovascular diseases such as arterial hypertension. The hypertensive state induced by ethanol is a complex multi-factorial event, and oxidative stress is a pathophysiological hallmark of vascular dysfunction associated with ethanol consumption. Increasing levels of reactive oxygen species (ROS) in the vasculature triggers important processes underlying vascular injury, including accumulation of intracellular Ca2+ ions, reduced bioavailability of nitric oxide (NO), activation of mitogen-activated protein kinases (MAPKs), endothelial dysfunction, and loss of the anticontractile effect of perivascular adipose tissue (PVAT). The enzyme nicotinamide adenine dinucleotide phosphate (NADPH) oxidase plays a central role in vascular ROS generation in response to ethanol. Activation of the renin-angiotensin-aldosterone system (RAAS) is an upstream mechanism which contributes to NADPH oxidase stimulation, overproduction of ROS and vascular dysfunction. This review discusses the mechanisms of vascular dysfunction induced by ethanol, detailing the contribution of ROS to these processes. Data examining the association between neuroendocrine changes and vascular oxidative stress induced by ethanol are also reviewed and discussed. These issues are of paramount interest to public health as ethanol contributes to blood pressure elevation in the general population, and it is linked to cardiovascular conditions and diseases.

To learn what mothers know on newborn bloodspot screening (NBS), the procedure, and sources used, a pilot study was performed. An online questionnaire was developed, with a first part fo-cused on characteristics and the NBS procedure, a second on knowledge, information sources, and health care providers (HCP). This questionnaire was accessible until 200 answers were received. Characteristics of respondents were representative for the population. Mothers recalled verbal consent in 69.5%, 12.5% did not, 18% stated that no consent was requested. The ‘knowledge’ part contained 12 closed questions, 5 multiple-choice questions on sources, and assessment (5-point Likert) of the information transfer. The mean knowledge level was 7.2/12. Screening concepts (consequences, likelihood, sensitivity, carrier) and absence of notification of normal findings were well known. The fact that NBS is not compulsory and post-analysis sample handling were poorly known. Key HCPs were midwifes (80.5%) and nurses (38.5%). When the leaflet (44%) was pro-vided, the majority read it. Mean Likert scores were 3.36, 3.38, 3.11 and 3.35 (clarity, timing ap-propriateness, sufficiency, usefulness). The knowledge level and consent practices were reasonable well. Key HCP were midwives and nurses, leaflets were supporting. This should enable a quality improvement program to a sustainable NBS program in Flanders.

Background: Scaffold (SCA) functionalization with aptamers (APT) provides adsorption of specific bioactive molecules on biomaterials surface. The aim of this study was to observe if SCA enriched with anti-fibronectin APT can favor coagulum (PhC) and osteoblasts (OSB) differentiation. Methods: 20 ug of APT was functionalized on SCA by simple adsorption. For PhC formation, SCAs were inserted into rat calvaria defects for 17 hours. Following proper transportation (Buffer solution-PB), OSB (UMR-106 lineage) were seeded over PhC + SCAs with and without APT. Cells and PhC morphology, PhC cell population, protein labelling and gene expression were observed in different time points. Results: The APT induced higher ALP and BSP immunolabeling in OSB. CD90, CD45 and CD44 expression was more detected in APT group than when scaffolds were not functionalized. Additionally, an enriched and dense fibrin network and different cell types were observed, with more OSB and white blood cells in PhC formed on SCA with APT. The gene expression showed higher TGF-β1 detection in SCA with APT. Conclusions: The SCA functionalization with fibronectin aptamers provides a selective expression of proteins related to coagulation pattern and osteo differentiation. Additionally, aptamers increase TGF-β1 gene expression, which is highly associated with improvements in regenerative therapies.

Background and Aim. Recently made analysis for anti-HBcor prevalence within Kazakhstan blood donors population concluded 17.2% rate. Considering these data are among the highest of infectivity results worldwide, an objective of this study was to define an association of positive Hepatitis B serology markers with risk and behavior factors. Methods. The blood donors’ samples were tested for anti-HBcore total (IgG/IgM) and anti-HBs, by CLIA on the Architect i2000SR platform (Abbott). Surrogate alanine transferase (ALT) markers for all blood donors were tested by kinetic method on the Biosystems A25 analyzer. A questionnaire was developed for socio-demographic characteristics, donors’ nutrition habits, cholesterol levels and history of smoking, alcohol consumption. Informed consent was obtained from all study participants. Statistics was calculated using the R software program (version 4.1.1, USA, 2021). Results. A group of 5709 blood donors participated in the study. Participants with positive anti-HBcore scores were on average older (41.8 vs 34.4 years, p<0.001), Kazakh (88.7% vs 83.0%, p<0.001), married (74.0% vs 55.6%, p<0.001), had a secondary education (70.1% vs. 59.4%, p=0.03), smoked (27.9% vs. 24.3%, p=0.05), had a longer smoking history (13.6±9.5 years vs. 9.8±8.5 years, p<0.001), and various hypercholestesterolaemia (6.2% vs 3.9%, p=0.02). Predominantly their main meal was dinner (17.0% vs 14.2%, p=0.03). Analysis for associations of socio-demographics characteristics, risk factors, nutrition with anti-HBs, showed that those who have secondary education level (70.1%) were more likely to be anti-HBs-positive (p=0.03). No other significant correlations for anti-HBs were observed. Conclusions. The risk factors and behavior analysis highlighted the blood donors’ overall health status. Positive Hepatitis B markers associated with statistically significant characteristics from socio-demography, nutrition habits or risk factors could support further pathogenesis studies looking for HBV treatment guides fulfilling the existing gaps.

Aquaculture is growing rapidly as a food-producing sector and in recent years, fishmeal prices have climbed by more than twofold on a global scale. This review of previous studies was performed to contribute to the extant literature on the aquaculture sector to aid cost reduction of aquafeeds by identifying substitute protein that can replace fishmeal. The review followed the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) using the SCOPUS and WOS (Web of Science), DOAJ (Directory of Open Access Journals), Academia, and Pubmed Central databases with the following search terms: “fishmeal,” “alternative protein source” and “aquafeeds.” This resulted in 5,331 articles from the SCOPUS and WOS databases. Finally, the titles and abstracts of the articles were screened, giving a total of 162 articles that were used in the study; another 58 articles came from open databases. Results have shown that 100% replacement of fishmeal with blood meal did not affect the growth of fish as well as 75% to 100% combination of poultry-by-product (PBM), feather meal (FEM), and blood meal (BM). Moreover, a 10% replacement of fishmeal using seaweed (Gracilaria arcuata) has no adverse effect on feed efficiency and growth performance of tilapia, a 50% replacement of fishmeal using black soldier fly (Hermetia illucens), and 25% replacement using soybean (Glycine max) also showed better results for fish growth. With that, this review shows that alternative protein can be a great alternative to the aquaculture sector in reducing the cost of aquafeeds since alternative proteins are much cheaper than the usual fishmeal.

Cryptococcosis is a leading cause of death among people with HIV in sub-Saharan Africa. Limited diagnostic and therapeutic options significantly impair treatment options in Africa. We investigated the burden of cryptococcosis and related mortality among people with HIV and suspected sepsis in Ethiopia. We conducted a prospective cohort at 1) Adama Hospital Medical College and 2) Asella Referral and Teaching Hospital from September 2019 to November 2020. We enrolled adult HIV-infected patients presenting with suspected sepsis and assessed 28-day survival. We performed blood cultures and cryptococcal antigen (CrAg) testing. In total, 82 participants were enrolled with a median age of 35 years and 61% being female. Overall, 11(13%) had positive CrAg tests, of which 5 had Cryptococcus detected in blood cultures. Despite high-dose fluconazole (1200mg/d) monotherapy in patients with positive CrAg tests, the 28-day mortality was 64%(7/11), being significantly higher than in CrAg-negative patients (9%(6/71); p&lt;0.001). Cryptococcosis is the leading cause of mortality among HIV-infected sepsis patients. CrAg screening in HIV-infected patients attending emergency department can minimize the cryptococcosis missing case irrespective of CD4 count and viral load. These findings warrant the need of a bundle approach for diagnosis of HIV-infected persons presenting with sepsis in low- and middle-income countries.

Many assets of clinical medicine, such as clinical chemistry and diagnostic imaging, make clinical diagnosis outstanding compared to postmortem diagnosis. An assessment of functional status certainly has priority over the postmortem, cross-sectional use of diagnostic tests and laboratory equipment. In addition, the cost of these tools is sometimes steep, and their use does not always fit into a reasonable cost–benefit ratio. However, sometimes postmortem observations, such as inflammation, pulmonary edema, or infiltration and cerebral swelling, cannot be explained without implementing immunohistochemical markers for postmortem diagnosis. Introducing blood-based biomarkers in postmortem care could significantly reduce the rates of inconclusive postmortems and discrepancies in autopsy findings and clinical diagnoses. This is particularly relevant in the scope of vascular pathology, considering the great burden of vascular diseases in overall mortality. Expanding traditional autopsy with blood-based (circulating) biomarkers to avoid invasive postmortem examination would have cultural, religious, and potential economic advantages. All of the target molecules are discussed in the context of the process they up-regulate or down-regulate and which turns out to be the final cause of death. Ultimately, it is evident that further studies are needed to provide concrete validation for a combination of markers on a specific case order to reach a postmortem diagnosis with or without clinical records.

Blood flow-restricted training (BFR) is constantly growing in popularity. Despite growing evidence of the significant influence of BFR training on different body functions, its impact on the vascular system, especially the arteries, is controversial. Therefore, the objective of our study was to analyze how BFR exercise, compared to other types of exercise without restriction of blood flow or other active intervention, influences arterial functions and angiogenesis in adults. Studies comparing the effect of BFR versus non-BFR training on arterial parameters are divided into three categories. Endothelial function, angiogenesis, and other vasculature functions. The search was based on three databases (Cochrane Library, PubMed®, Embase). In this systematic review, 38 studies were included. Meta-analysis revealed a more significant improvement in flow-mediated dilatation (FMD) (p=0.002) and the production of the primary angiogenesis biomarker Vascular Endothelial Growth Factor (VEGF) (p=0.009) after training in BFR compared to nonBFR (p=0.002). Analysis of pulse wave velocity, ankle-brachial index, systolic blood pressure, or heart rate did not show a significant difference in changes between BFR and non-BFR training. Other parameters examined were not sufficiently provided to be included in the meta-analysis. The results obtained, present trends suggesting the significant impact of BFR training on endothelial functions and angiogenesis. Unfortunately, there is still a lack of multicenter randomized clinical trials, including many participants, that are necessary to confirm the advantage of BFR over non-BFR activity.

A novel physiologically based algorithm (PBA) for fast CFD computation of Flow Fractional Reserve (FFR) in Coronary Artery Trees (CATs) is proposed and developed, which, unlike traditional methods, is based on the extension of the Murray’s law for blood vessels at the outlets and extra inlet conditions prescribed alternatively and iteratively. The PBA is then implemented in both SimVascular and Ansys CFD for testing and validation. For validation purpose, 3D models of CATs are built by using their CT images and computational meshes generated for mesh convergence study. Results obtained are then compared with Invasive Coronary Angiographic (ICA) data for validation and evaluation of its accuracy and computational efficiency. It is found that discrepancies between experimental and calculated values of pressure and flow rate at the inlet were less than 0.1% at the end of the 10^th round of iteration or less. Further validation shows that the difference between estimated and experimental FFR agree with each other with a maximum difference of 1.62% after convergence is achieved. The PBA is found to be a robust patient-specific and physiologically sound method that can be a good alternative to the existing Lumped Parameter Model (LPM) which is based on empirical scaling correlations using limited population-averaged data and requires nonlinear iterative computation for convergence.

Given the importance of menstrual blood in the pathogenesis of endometriosis and the multifunctional roles of menstrual mesenchymal stem cells (MenSCs) in regenerative medicine, this issue has gained prominence in the scientific community. Moreover, recent reviews highlight how robust the integrated assessment of omics data is for endometriosis. To our knowledge, no study has applied the multi-omics approaches to endometriosis MenSCs. It is a case-control study at a university-affiliated hospital. MenSCs transcriptome and proteome data were obtained by RNA-seq and UHPLC-MS/MS detection. Among the differentially expressed proteins and genes, we emphasize ATF3, ID1, ID3, FOSB, SNAI1, NR4A1, EGR1, LAMC3, and ZFP36 genes and MT2A, TYMP, COL1A1, COL6A2, and NID2 proteins that were already reported in the endometriosis. Our functional enrichment analysis reveals integrated modulating signaling pathways such as epithelial-mesenchymal transition (↑) and PI3K signaling via AKT to mTORC1 (↓in proteome), mTORC1 signaling, TGF beta signaling, TNFA signaling via NFkB, and response to hypoxia via HIF1A targets (↑in transcriptome). Our findings highlight primary changes in the endometriosis MenSCs, suggesting that the chronic inflammatory endometrial microenvironment can modulate these cells, providing opportunities for endometriosis etiopathogenesis. Moreover, they identify challenges for future research leveraging knowledge for regenerative and precision medicine in endometriosis.

Pathologies of the blood brain barrier (BBB) have been linked to a multitude of CNS disorders whose pathology is poorly understood. Cortical spreading depression (CSD) has long been postulated to be involved in the underlying mechanisms of these disease states, yet full understanding remains elusive. This study utilized an in vitro model of the BBB with b.End3 murine endothelial cells to investigate the role of CSD in BBB pathology by characterizing effects of the release of major pronociceptive substances on BBB functional integrity using TEER screening, transcellular uptake, and immunoreactive methods in concert with global proteome and phospho-proteomic approaches. Findings demonstrated relocalization and functional alteration to proteins associated with the cytoskeleton and endothelial tight junctions. Pathologic mechanisms induced by individual substances released during CSD were found to have unique phosphorylation signatures in phospho-proteome analysis, identifying Zona Occludens 1 as a possible pathologic “checkpoint” of the BBB. Utilizing these phosphorylation signatures, possible novel diagnostic methods may be developed for neurological diseases and warrants further investigation.

After the first weeks of vaccination against the SARS-CoV-2, several cases of acute thrombosis were reported. These news reports began to be shared frequently across social media platforms. The aim of this study was to conduct an analysis of Twitter data related to the overall discussion. Data was retrieved from 14th March to 14th April using the keyword ‘blood clots’. A dataset with n=266,677 tweets was retrieved, and a systematic random sample of 5% of tweets (n=13,334) were entered into NodeXL for further analysis. Social network analysis was used to analyse the data by drawing upon the Clauset-Newman-Moore algorithm. Influential users were identified by drawing upon the betweenness centrality metric. Text analysis was applied to identify the key hashtags and websites used at this time. More than half of the network was comprised of retweets and the largest groups within the network were broadcast clusters where a number of key users were retweeted. The most popular narratives were around highlighting the low risk of obtaining a blood clot from a vaccine and highlighting higher blood clot risks in medicines commonly consumed. A wide-variety of actors drove the discussion on Twitter ranging from writers, physicians, the general public academics, celebrities, and journalists. Twitter was used to highlight the low potential of obtaining a blood clot from a vaccine and encouraged vaccinations among the public.

(1) Background: We reviewed the logistics of the implementation of pathogen inactivation (PI) using the INTERCEPT Blood System™ for platelets and the experience with routine use and clinical outcomes in the patient population at the Sírio-Libanês Hospital of São Paulo, Brazil. (2) Methods: Platelet concentrate (PC), including pathogen reduced (PR-PC) production, inventory management, discard rates, blood utilization, and clinical outcomes were analyzed over the 40 months before and after PI implementation. Age distribution and wastage rates were compared over the 10 months before and after approval for PR-PC to be stored for up to 7 days. (3) Results: A 100% PR-PC inventory was achieved by increasing double apheresis collections and production of double doses using pools of two single apheresis units. Discard rates decreased from 6% to 3% after PI implementation and further decreased to 1.2% after 7-day storage extension for PR-PCs. The blood utilization remained stable, with no increase in component utilization. A significant decrease in adverse transfusion events was observed after the PI implementation. (4) Conclusion: Our experience demonstrates the feasibility for Brazilian blood centers to achieve a 100% PR-PC inventory. All patients at our hospital received PR-PC and showed no increase in blood component utilization and decreased rates of adverse transfusion reactions.

The aim of the work was to update the distribution range of Aedes (Stegomyia) albopictus Skuse in the Americas, review the blood feeding patterns and compare the minimum infection rate (MIR) between studies of vertical and horizontal transmission of arboviruses. The current distribution of Ae. albopictus encompasses 21 countries in the Americas. In eleven published papers on the blood feeding pattern of Ae. albopictus, DNA from 16 species of mammals and five species of avian species was found. The most common host is humans, and dogs. We found 24 published papers on the identification of arboviruses in wild populations of Ae. albopictus with the potential to infect humans and animals. Eight arboviruses have been isolated in different studies carried out in Brazil, USA, Mexico, Colombia, and Costa Rica. Fifty-eight percent (14/24) of the publications reported vertical transmission of arbovirus. Positive pools were higher in vertical (8.45%) compared to horizontal transmission (0.97%). This was supported by the MIR, which was 3 times greater in vertical (MIR=3.21) than horizontal transmission (MIR= 1.08). In conclusion, Ae. albopictus is an invasive mosquito with wide phenotypic plasticity to adapt to broad and new areas, high vectorial competence to transmit several arboviruses mainly by transovarial transmission, it can participate in the endemic transmission, and serve as a bridge vector for emerging arboviruses between sylvan, rural, and urban areas.

Pathogens and adulterants in human feeding consumables can be readily identified according to their electrical properties. Electrical bioimpedance analysis (BIA) has been widely used for body contents characterization, such as blood, urine, lactate and sweat. If the blood glucose concentration alters the electrical properties of the blood medium, then the impedance spectrum obtained by BIA can be used to measure glycemia. In some applications, artificial neural networks allows the correlation of these parameters (impedance and glucose concentration) by means of symbolic and statistical rules. According to our literature review, there is any physical model that allows the interpretation of the relationship between blood’s electrical properties, obtained by BIA, and the concentration of glucose in the blood plasma. This article proposes a simplified physical model for blood electrical conductivity as a function of glucose concentration, based on Bruggeman’s effective medium theory. The equations of this model were obtained considering an insulating phase distribution diffused in a conductive matrix, in which red blood cells are represented by macroscopic insulating nuclei and glucose molecules by microscopic insulating particles. The impedance spectrum for different glucose concentrations (4.0 to 6.8 mmol/L) in a blood sample, published by Kamat Bagul (2014), were compared with the proposed model. The results showed a significant correlation with the experimental data, showing a maximum error of 5.2%. The proposed model might be useful in the design of noninvasive blood glucose monitoring systems.

Aedes aegypti is the primary mosquito vector of several human arboviruses including dengue virus (DENV). Vector control is the principal intervention to decrease the transmission of these viruses. The characterization of molecules involved in the mosquito physiological responses to blood-feeding may help to identify novel targets useful in the design of effective control strategies. In this study, we evaluated the in vivo effect of feeding adult female mosquitoes with human blood containing either heat-inactivated (IB), normal serum (NB), and RNA-seq based transcript expression was compared against sugar-fed (SF) mosquitoes. In the in vitro experiments, we treated Aag2 cells with a recombinant version of the complement proteins (hC3 or hC5a) and compared transcript expression to untreated control cells after 24h. The transcript expression analysis revealed that human complement proteins modulate approximately 2,300 transcripts involved in multiple biological functions, including the immune system. We also found 161 up-regulated and 168 down-regulated transcripts differentially expressed when hC3 and hC5a were compared against the control untreated cells. We conclude that active human complement induces significant changes in the transcriptome of Ae. aegypti mosquitoes, which can influence the infective capacity of pathogens ingested during blood meals.

COVID-19 induces coagulopathy at the base of SIC (sepsis-induced coagulopathy) and it is an important cause of death in the patients. Cytokine storm causes imbalance in coagulation and fibrinolytic system. A combination of hypercoagulability state, decrease or inhibition of fibrinolytic and endothelialopathy causes thromboembolic events. Underlined disease with a high rate of mortality in COVID-19 like diabetes, hypertension and some conditions like aging and obesity are the main disorders with hemostatic disturbance and increase of coagulopathy. Therefore, it seems that the combination of COVID-19 infection and these risk factors increase the risk of thromboembolic all together.

Ixodes scapularis is the major vector of Lyme disease in the eastern United States. Each active life stage (larva, nymph, and adult) takes a blood meal either for developing and molting to the next stage (larvae and nymphs) or for oviposition (adult females). This protein-rich blood meal is the only food taken by Ixodes ticks and therefore blood digestion is very important for tick survival. Most studies on blood digestion in ticks have shown that the initial stages of digestion are carried out by cathepsin proteases within acidic digestive cells. However, most of these studies have focused on partially engorged ticks. In other hematophagous arthropods, the serine proteases play an important role in blood protein degradation. In this study, we determined transcript expression of four I. scapularis serine proteases with previously characterized roles in blood digestion. RNA interference was used for functional analysis and a trypsin-benzoyl-D, L-arginine 4-nitoanilide assay was used to measure active trypsin levels. An in vitro hemoglobinolytic assay was performed with or without serine protease inhibitor. Our data suggest that trypsin levels increase significantly after blood feeding and peaked in larvae, nymphs, and adults at 3, 1, and 1 day post host detachment, respectively. The knockdown of three previously identified serine proteases by RNAi negatively impacted blood intake, survival, fecundity, levels of active trypsin in the gut and resulted in lower hemoglobin degradation in vitro. A trypsin inhibitor, PMSF, blocked the action of trypsin in the gut extract resulting in 65% lower hemoglobin degradation. We provide evidence of the serine proteases as digestive enzymes in fully engorged, replete females. Our data also demonstrated that in addition to blood digestion, these serine proteases might have a role in blood feeding success in I. scapularis.

Chronic gastro-abdominal pain with altered bowel habits are associated with pathologies including gastroenteritis, autoimmune and inflammatory bowel disease, and irritable bowel syndrome (IBS). In IBS, diagnostic evidence of infection or inflammation are absent, yet symptoms nonetheless include chronic abdominal pain and alterations of stool frequency and consistency, with most common subtypes including diarrhea-predominant (IBS-D) or constipation predominant (IBS-C). [1, 2] IBS is a common clinical complaint in westernized nations, with females more frequently diagnosed than males [3]. Obesity is also associated with increased likelihood of chronic pain [4], and is associated with intestinal dysbiosis, and systemic inflammatory signatures [5]. Improving personalized medicine therefore requires patient stratification based on a combination of biological factors contributing to the individual’s symptom and biomarker spectrum. The “buffy coat” method isolates leukocytes and PBMCs from whole blood, comprises the immune cell population in peripheral blood. These cells are relatively inactive but are primed to respond to generalized and localized immune activation signals; they are under active investigation as diagnostic biomarkers [6]. Collection of buffy coat is a standard method in clinical laboratories; detection of immune activation via RNA expression biomarkers will be informative of differential biological response, and be tractable to collect in clinical settings. Results of differential expression, pathway analysis, and cell-type abundance analysis from buffy coat RNA, is presented here using variables for BMI, Gender, and IBS-subtype from publicly available Nanostring RNA expression and phenotypic data from the NCBI GEO database.

Different alcoholic beverages can have different effects on blood alcohol concentrations (BAC) and neurotoxicity even if equalized for alcohol content by volume. Anecdotal evidence suggested that natural wine is metabolized differently from conventional wines. This triple-blind study compared the BAC of 55 healthy male subjects after consuming the equivalent of 2 units of alcohol of a natural or conventional wine over 3 mins in two separate sessions one week apart. BAC was measured using a professional breathalyzer every 20 mins after consumption for 2 hrs. The BAC curves in response to the two wines diverged significantly at twenty minutes, at forty minutes and also at their maximum concentrations (peaks), with the natural wine inducing a lower BAC than the conventional wine (T20 0.40 vs. 0.46 [p<0.0002], T40 0.49 vs. 0.53 [p<0.0015], peak 0.52 vs. 0.56 [p<0.0002]). These differences are likely related to the development of different amino acids and antioxidants in the two wines during their production. This in turn may affect the kinetics of alcohol absorption and metabolism. Other contributing factors may also include pesticide residues, differences in dry extract content and the use of indigenous or selected yeasts. Further studies are needed to fully understand why natural wines are metabolized differently from conventional wines.

1) Background: Spirulina (Arthrospira) maxima has shown beneficial effects such anti-dyslipidemic, antiviral, antioxidant and antihypertensive. However, there are few and limited clinical studies. 2) Methods: a prospective, randomized, parallel pilot study of 4.5 g administration of Spirulina maxima or placebo for 12 weeks in 16 patients with systemic arterial hypertension undergoing treatment with ACE inhibitors was performed to assess the effects on endothelial damage and oxidative stress indicators. The blood levels of sICAM-1, sVCAM-1, endothelin-1, and sE-selectin were quantified; the activities of catalase, superoxide dismutase, glutathione peroxidase, glutathione reductase and concentrations of reduced glutathione, oxidized glutathione, and thiobarbituric acid reactive susbtances, were also quantified before and after the treatment period. 3) Results: There were statistically significant (p < 0.05) decreases in systolic blood pressure, sVCAM-1, sE-selectin and endothelin-1 levels, and increases in glutathione peroxidase activity and oxidized glutathione levels. 4) Conclusion: The effects found in the present study agree with antihypertensive and antioxidant effects previously reported for Spirulina maxima. However, this is the first report about the effects on indicators of endothelial damage. More research in this field is necessary to gain an insight into the effects of Spirulina on these indicators.

This present study was designed to find out whether the acankoreagenin showed the antidiabetic and renoprotective effects in streptozotocin (STZ)-induced diabetic nephropathy (DN) rats. Type I diabetes was induced by a single intraperitoneal injection of STZ (70 mg/kg). At the end of the experiment, rats were euthanized and serum/plasma was separated for the determination of glucose, insulin, glycated hemoglobin A1c (HbA1c), C-peptide, biochemical parameters, and kidney function. One kidney was used for determining glutathione, superoxide dismutas, malondialdehyde, and tumor necrosis factor-alpha levels. The other kidney and pancreas were used for histopathological studies and immunohistochemical measurement of transforming growth factor beta (TGF-β) or NF-κB. Acankoreagenin (2 mg/kg) treatments led to a significant reduction in blood glucose assessed via oral glucose tolerance test (OGTT) in diabetic rats at 2 h. The treatment also resulted in improved body weight, decreased HbA1c, restored lipid profile, and renal oxidative stress. By inhibiting NF-κB, the release of proinflammatory cytokines was suppressed and by inhibiting TGF-β, the renal fibrosis was suppressed in STZ-induced diabetic rat model. Histopathological injury was also observed in pancreatic and renal tissues. These findings support the beneficial effect of acankoreagenin treatment in DN, which could be attributed to its antidiabetic and renoprotective effects.

P-glycoprotein (Pgp) determines resistance to a broad spectrum of drugs in glioblastoma multiforme (GB) because it is highly expressed in GB stem cells and in brain-blood barrier (BBB), the peculiar endothelium surrounding brain. Inhibiting Pgp activity in BBB and GB is still an open challenge. Here, we tested the efficacy of a small library of tetrahydroisoquinoline derivatives with an EC₅₀ for Pgp < 50 nM, in primary human BBB cells and in patients-derived GB, from which we isolated differentiated/adherent cells (AC, i.e. Pgp-negative/doxorubicin-sensitive cells) and stem cells (neurospheres, NS, i.e. Pgp-positive/doxorubicin-resistant cells). At 1 nM, 3 compounds increased the delivery of doxorubicin, a typical substrate of Pgp, across BBB monolayer, without altering expression and activity of other transporters. The compounds increased the drug accumulation within NS, restoring necrosis, apoptosis and reduction in cell viability induced by doxorubicin. In co-culture systems, the compounds added to the luminal face of BBB increased the delivery of doxorubicin to NS growing under BBB and rescued the drug’s cytotoxicity. Our work identified new ligands of Pgp active at low nanomolar concentrations, that effectively reduce Pgp activity in BBB and GB, and can improve chemotherapy efficacy in this tumor.

The cause-effect relationship between iron deficiency anemia (IDA) and osteoporosis has not been established in the general population. Thus, the current longitudinal study determined the role of IDA as a risk factor for osteoporosis by analyzing a large nationwide population-based sample. In a sample of 1,000,000 randomly sampled individuals from the 1998-2012 Taiwan National Health Insurance Research Database, patients with IDA (case group [n=35,751]) and individuals without IDA (control group [n=178,755]) were compared. Patients who were <20 years of age and who had pre-existing osteoporosis prior to the diagnosis of IDA were excluded. Each patient with IDA was age- and gender-matched to 5 individuals without IDA. The diagnoses of IDA and osteoporosis (coded using ICD-9CM) were further confirmed with blood test results and X-ray bone densitometry to ensure the accuracy of the diagnoses. Osteoporosis occurred more often among patients with IDA compared to individuals without IDA (2.27% vs. 1.32%, p<0.001). Cox proportional hazard analysis revealed that the risk for osteoporosis was significantly higher in the case than the control group (hazard ratio [HR]=1.74; 95% CI=1.61-1.88) and remained similar after adjustment for covariates (adjusted HR=1.81; 95% CI=1.67-1.97). Compared with individuals without IDA, the risk for osteoporosis was even higher for patients with IDA who received intravenous ferrum therapy (adjusted HR=2.21; 95% CI=1.85-2.63). In contrast, the risk for osteoporosis was reduced for patients with IDA who received a blood transfusion (adjusted HR=1.47; 95% CI=1.20-1.80). As a predictor, prior IDA is a significant and independent risk factor for development of osteoporosis. In contrast to blood transfusion treatment, the use of intravenous ferrum may further increase the risk for future osteoporosis.

Refractive index measurements have been an important task for a long time because that index plays an essential role in describing the optical properties of a material. Many methods have been developed to perform that task. Some of them use interferometry to achieve high precision, however these configurations are complicated. Some measure the critical angle using simple structures, but the accuracy is not satisfactory because it is difficult to judge the exact critical angle with intensity variations. Here we propose several new schemes based on measuring the polarization change in the total internal reflection. The proposed method has the merits of simple structure and easy incident angle determination that gives the maximum phase change. Additionally, it is possible to find the material dispersion by measuring the wavelength dependence of the polarization ellipticity. Some useful formulas relating the refractive index with the maximum phase change are obtained. This work can provide valuable alternatives for index measurement.

Synthetic materials such as Carbon, Kevlar, and Glass fibers are extensively utilized in various industries due to their superior characteristics including high stiffness, great strength, low den-sity, and high wear resistance, these advantages contributed to making them widespread in ap-plications like; aerospace, automobile, civil and electronics. This research is carried out to enhance the creep compliance of epoxy composite material by considering two types of fibers as reinforcement. A composite material is produced by combining two fibers, Kevlar fiber mixed with sika epoxy resin, along with Carbon fiber also mixed with sika epoxy resin using a Hand-Layup process. Experiments and numerical modeling are examined to offer a comprehensive understanding creep behavior of epoxy composite material in different weight ratios. Burger and Prony models are used to represent stress relaxation and creep strain of Visco-elastic material. According to the results, sika epoxy resin reinforced with Kevlar and Carbon fibers exhibits enhancement in the mechanical properties compared with pure epoxy. The use of Kev-lar/Sika epoxy composite results in higher creep compliance and modulus of elasticity compared with Carbon/Sika epoxy composite.

Microencapsulation using polymer materials is a potent process to protect and prolong the survival of probiotics. Cissampelos pareira leaf contains natural gelling agents that possess solidifying properties. This study aimed to investigate the development of microencapsulation containing Lacticaseibacillus paracasei using C. pareira extract as a natural encapsulating material. The absorption bands near 1603 cm−1 and 1725 cm−1 detected by Infrared spectroscopy (FTIR) were identified as pectin in C. pareira structure. The L. paracasei-C. pareira microcapsules (LP-CP) showed high encapsulation efficiency by 90.5% which was confirmed by the evaluation of their survival rate. Under thermal conditions (85oC), bacterial viability detected in the microcapsules was 69% as opposed to non-encapsulated bacteria where viability was as low as 5%. Furthermore, the microcapsule presented 75% bacterial viability whereas the free cells showed 30% under acidic conditions (pH 2). During storage conditions, LP-CP viability remained at 50% when the storage time was extended to 90 days whereas, the survival rate of free cells significantly decreased by 100% after 90 days. This information suggests that C. pareira is a potent polymer which can be used as an eco-friendly material for the microencapsulation of probiotics relevant as dietary supplementation for humans or animals.

Hybrid reinforcement in a composite material (CM), in many situations, allows better govern material mechanical properties. Polymer matrix CM plate is reinforced with small particles and macro-fibers. Particles are oil shale ash (OSA) powder, macro-fibers – basalt fiber threads im-pregnated by matrix material. With the goal to find out elastic properties of the matrix- polymer with OSA, samples with its different concentrations were experimentally fabricated and their elastic properties were experimentally measured. Obtained data were used in numerical model-ling. Was observed polymer matrix composite slab, reinforced with OSA and three-dimensional (3D) basalt fiber fabric. Fabric are forming threads impregnated by matrix (polymer resin mixed with OSA particles). Damage accumulation in the stretched slab was modelled. Impregnated thread, in the modelling, is observed as a macro-fiber (MF) with averaged elastic properties. With the load increase MF in the material began to break. At first, appeared isolated single breaks. A probabilistic sequential MF rupture accumulation model was accepted and numerical-ly realized. The geometry of the reinforcing knitted fabric was modeled using the Leaf and Glaskin approach. In the knitted fabric highly, stressed MF cross-sections are observed as po-tential location where thread breakage can occur. If one thread breaks, the cross-sections of the adjacent threads experience the overload caused by this rupture. More overloaded crossection in the adjacent overloaded thread breaks and we obtain two adjacent broken MF designated as a defect with the size j=2. The probabilities of obtaining defect consisting of at least 2, 3, … j adjacent broken MF in the plate were calculated. The calculations continued until the rupture process becomes unstable (j→∞). The overstresses on adjacent threads in the CM were calculat-ed using the FEM three-dimensional numerical approach. Analytical and stochastic methods were used for the load-carrying capacity determination and different size defects accumulation in the hybrid composite material (HCM) plate. Also, was calculated the probability of the plate rupture.

The purpose of the research was to obtain information about the necessity and efficiency of the application of localized irrigation to some qualitative indices of plum trees in the nursery, against the background of different fertilization treatments. The expected results to be obtained by applying differentiated rules of irrigation and fertilization will consist in obtaining a healthy, vigorous fruit tree planting material, increasing production in the nursery. With fruit trees in the nursery, as with all cultivated plants, the growth process depends to the greatest extent on the climate and soil conditions available to them. The use of fertilizers in tree culture becomes necessary to renew the reserve of nutrients consumed by plants or leached in depth, then to improve the physical condition, the chemical composition, and the overall state of fertilization of the soil. It is necessary to intervene every year, in several rounds, with fertilizations that ensure, on the one hand, the achievement of a certain level of production, and on the other hand, a certain level and ratio of nutritional elements by returning the amounts of elements easily accessible nutrients extracted with the harvest to be able to maintain, in this way, the fertility of the soil in accordance with the age of the plantation and the level of production. The two varieties of plum studied were Stanley and Cacanska Lepotica, two valuable varieties for the quality of the fruit. During the research, the fertilization treatments had the highest contribution (34.50 %) on the stem diameter, compared to irrigation (20.67 %) and respectively the variety (5.63 %), considering that the variety did not significantly influence the increase in diameter of the grafted trees.

In order to study the strength changes of concrete specimens under different loading conditions, based on the principle of minimum energy dissipation and from the Angle of concrete failure energy per unit area, the finite element numerical simulation software was applied to concrete specimens with different failure modes of tension, compression, bending and torsion, and the double-broken line damage constitutive model was adopted to simulate and analyze the failure forms of concrete specimens under different loading conditions. The failure area and failure energy of each specimen during loading were quantitatively calculated under each failure mode, and the relationship between the failure area and failure energy consumed under different failure modes was analyzed. The results show that under different failure modes, the failure area of concrete specimens is different, the energy consumed during failure is different, and the strength is different. However, in the process of failure, no matter how the failure mode changes, the failure energy W per unit area remains unchanged and is a constant, which is related to the physical properties of concrete itself.

With the rapid development of China's economy, construction industrialization has become the main development trend of China's construction industry, and the convenient, efficient, environmental protection has become the new fashion, therefore the application of prefabricated building is more and more common. Stair serves as the weak link in prefab type building, the connecting node has an important influence on its failure. In this paper, pseudo-static tests are carried out on the joints in different forms of ladder holes to study the mechanical properties of flexible hinge points filled with flexible materials, and the hysteresis curve, skeleton curve and bearing capacity of each specimen are analyzed. The test results show that the flexible hinge can give full play to its flexible characteristics to ease the stress of ladder beam, pin bolt reinforcement and ladder hole, and the bearing capacity of flexible hinge points is moderate, which can not only mitigate the inclined bracing effect under the action of small and medium earthquakes, but also ensure the stair does not fall off under the action of large earthquakes. Through the experiment comparison, the ladder hole adopts node form 2, which can give full play to the advantage of flexible material.

Two-dimensional (2D) semiconductors like Transitional Metal Dichalcogenides (TMDCs) have attracted strong research interest in the last decade. Unlike the more celebrated 2D material graphene, TMDCs like molybdenum disulfide(MoS₂) possess bandgap. The number of layers critically depends on the band structure of MoS₂. For example, it is indirect for bulk MoS₂. However, it becomes direct bandgap material for a monolayer MoS₂. Monolayer MoS₂, therefore, becomes an important material for photoelectronic devices. An essential aspect of such devices is the metal-semiconductor junction. Metal-TMDC junction is, therefore, a well-studied interface due to its importance for 2D materials-based photoelectronic devices. Most importantly, it can be flexible, stretchable to it’s length, and bent to a large angle. We used metals like Au and Al to interface with TMDs like MoS₂. We used silicon and PDMS as substrates. So, we have to focus on investigating the relative properties of various TMDCs. We see change in band energy and vibrational modes via Photoluminiscence and Raman spectroscopy as shown in the article. However, certain aspects are yet to be explored, for example, how this interface behaves in the presence of strain.

. Manufacturers are increasingly adopting mixed-flow manufacturing models to meet the growing customized, diverse, and dynamic customer demand. In such an environment, material distribution scheduling optimization is vital for smooth operations and is integral to production management. However, manufacturers frequently encounter problems like disordered and delayed material distribution. Traditional scheduling methods suffer from problems like inadequate transparency, delayed decision directives, and suboptimal results, impacting performance. To this end, this study proposes a dynamic material distribution scheduling optimization model and strategy based on digital twin (DT) to address these problems. Firstly, we introduce workstation satisfaction and establish a material distribution path optimization model minimizing total distribution cost while maximizing workstation satisfaction. Subsequently, we present a cloud-edge computing-based decision framework and explain the DT-based material distribution system's components and operation. Furthermore, a dynamic material distribution scheduling optimization mechanism based on DT is designed. By incorporating a savings method and incentive, penalty strategies, improvements are made to the path node selection probabilities and the information pheromone update rules of the traditional ant colony optimization (ACO) algorithm. Finally, a numerical case study, using real data from collaborating enterprises, validates the proposed algorithm and strategy. This research offers valuable insights into logistics management and algorithm design in smart manufacturing environments.

Material Extrusion is a popular additive manufacturing technology due to its low cost, wide market availability, ability to construct complex parts, safety, and cleanliness. However, optimizing the process parameters to obtain the best possible mechanical properties has not been extensively studied. This paper aims to develop ensemble learning-based models to predict the ultimate tensile strength, Young's modulus, and strain at break of PLA and PLA-CF 3D-printed parts, using printing temperature, printing speed, and layer thickness as process parameters. Additionally, the study investigates the impact of process parameters and material selection on the mechanical properties of the printed parts and uses Genetic Algorithms for multi-objective optimization according to user specifications. The results indicate that process parameters and material selection significantly influence the mechanical properties of the printed parts. The Genetic Algorithm successfully identifies optimal parameter values for the desired mechanical properties. Moreover, this work is the first to model Process-Structure-Properties relationships for an additive manufacturing process and to use a multi-objective optimization approach for multiple mechanical properties, utilizing ensemble learning-based algorithms and Genetic Algorithms.

3D printing technology has brought about a paradigm shift in the delivery of clinical care in medicine and dentistry. There are several different 3D printing technologies, which, along with different printable materials with unique biomechanical properties, allows for a wide range of applications for 3D printing in dentistry. The clinical use of 3D printing has created versatile applications which streamline our digital workflow. Technological advancements have also paved the way for the integration of new dental materials in dentistry. This paper provides an overview of the mechanisms of 3D printing, the dental materials relevant to each mechanism and the possible applications of these materials within different areas of dentistry. Understanding the existing spectrum of 3D printing applications in dentistry will serve to further expand its use in the dental field.

Greenhouse gas (GHG) emissions from human activities have climbed significantly above pre-pandemic levels and reached record highs that unequivocally accelerate global warming. Industry has a significant impact on climate change, emitting at least 21 % of global GHGs and making little overall progress toward its reduction until now. Reducing industry’s emissions requires coordinated action along the value chains in order to promote mitigation options, such as energy and material efficiency, circular material flows, and transformative changes within production processes. The authors analyzed the GHG emissions generated during the manufacturing of three different products of automotive suppliers located in Austria. Despite previous efforts toward an environmentally compatible fabrication, additional and significant reduction potentials were identified. These measures for product carbon footprint (PCF) reduction included the sourcing of low-carbon materials (which are already available on the market), more extensive use of renewable energy, and changes towards more resource efficient manufacturing processes and machinery. Depending on the materials used, the PCF can be reduced by up to 80 %. The findings serve to prepare for future PCF reporting regulations and illustrate reduction potentials to achieve future market advantages, especially when PCFs become an awarding criterion.

Lignocellulosic biomass is a powerful approach for the production of sustainable biofuels and the further achievement of the goal of biomass conversion into a second-generation clean energy that can cope with the depletion of fossil reserves and rising energy requirements. In the conversion process, a pretreatment is essential to overcome the recalcitrance of the lignocellulosic biomass, accelerate its disintegration into cellulose, hemicellulose, and lignin and, in turn, get an optimal yield of fermentable sugars in the enzymatic hydrolysis. In addition to this, it should be industrially scalable and capable of enhancing fuel properties and feedstock processability. Here, steam explosion technology has stood out due to its results and advantages such as wide applicability, high efficiency in the short term, or lack of contamination in spite of its conventionality. This gentle and fast pretreatment incorporates high temperature autohydrolysis and structural alteration by explosive decompression. Steam explosion method has been one of the most effective especially for the hydrolysis of cellulose from agricultural wastes due to the lower quantity of acetyl groups in the composition of hemicellulose. In this aspect, sugarcane bagasse is a promising feedstock for bioethanol production due to its high cellulosic content and elevated availability. The objective of this review has been to compile the latest information on steam explosion pretreatment, stages, equipment, variables involved, by-products generated, as well as the advantages and disadvantages of the technique. At the same time, its feasibility and viability using sugarcane bagasse as feedstock has been discussed. Finally, the effectiveness of the technique with different feedstocks has been evaluated.

Taking advantage of fact that the surface electrons of metallic nanoparticles (NPs) can be effectively released even at a low voltage bias, we demonstrate an improvement in the electrochemical performance of nano-sized Prussian Blue (PB) based secondary batteries by the incorporation of bare Ag or Ni NPs onto the vicinity of the working PB NPs. It is found that the capacity for electrochemical energy storage of the 17-nm-PB-based battery is significantly higher than the capacity of 10-nm-PB-based, 35-nm-PB-based or 46-nm-PB-based batteries. There is a critical PB size for the highest electrochemical energy storage efficiency. The full specific capacity CF of the 17-nm-PB-based battery stabilized to 62 mAh/g after 130 charge-discharge cycles at a working current of IW = 0.03 mA. The addition of 14 mass-percent of Ag NPs in the vicinity of the PB NPs gives rise to a 32% increase in the stabilized CF. A 42% increase in the stabilized CF can be obtained with the addition of 14 mass-percent of Ag NPs on the working electrode of the 35-nm-PB-based battery. An enhancement of CF is also found for electrodes incorporating bare Ni NPs but the effect is smaller.

The effect of cooling rate on the magnetorheological response was investigated for magnetic hydrogels consisting of carrageenan and carbonyl iron particles with a concentration of 50 wt.%. For magnetic gels prepared by natural cooling, the storage moduli at 0 and 50 mT were 3.7×104 Pa and 5.6×104 Pa, respectively, and the change in the modulus was 1.9×104 Pa. For magnetic gels prepared by rapid cooling, the storage moduli at 0 and 50 mT were 1.2×104 Pa and 1.8×104 Pa, respectively, and the change in the modulus was 6.2×103 Pa, which was 3.1 times higher than that for the magnetic gel of rapid cooling. The critical strains, where G‘=G“ on the strain dependence of the storage modulus, for magnetic gels of natural cooling and rapid cooling were 0.023 and 0.034, respectively, indicating that the magnetic gel of rapid cooling has a hard structure compared to that of natural cooling. Oppositely to this, the change in the storage modulus at 500 mT for the magnetic gel of rapid cooling was 1.6×105 Pa, which was 2.5 times higher than that of natural cooling. SEM images revealed that many small aggregations of carrageenan network were found in the magnetic gel of natural cooling and continuous phases of carrageenan network with large sizes were found in the magnetic gel of rapid cooling. It was revealed that, magnetic particles in the magnetic gel of rapid cooling can move and form a chain structure at high magnetic fields by breaking the restriction from the continuous phases of carrageenan.

Amidst the strong demand for wood-based products, and the clamor of environmental consciousness, more functional and green solutions arise to meet both of these goals. Pursuant to this, the study looked into the potential of a bio-waste taken from Cocos nucifera tree known as phellem—the tree’s outermost skin made of dead tissues, to be a main component of a new construction material. This study builds on existing research showing phellem is impermeable, buoyant, elastic, has a slow burn rate, and repels water during precipitation, which supports the hypothesis that phellem may be a potential substitute material for dry wall boards. To test this, three (3) formulations were developed as experimental setups to test the physico-mechanical properties of coconut palm phellem (COPAP): Formulation A (40% COPAP and 60% cement); Formulation B ( 25% COPAP and 75% cement); and lastly, Formulation C that was (10% COPAP and 90% cement). The study tested (1) which among these formulations exhibited the best physico-mechanical properties, then it (2) compared the formulations with common dry wall products available in the market, and subsequently, (3) identified the possible architectural applications of COPAP board as a new building material. Of the three setups, Formulation C exhibited the best physico-mechanical properties in terms of compressive and flexural strength, fire resistivity, and water absorption. It fared better than the particle board in terms of compressive strength, better than wafer and particle board in fire resistivity, performed best in the water absorption test, and was almost equivalent in flexural strength to fiber cement board. With these findings, the study concluded that COPAP board can be used for projects that entail a high number of interior partitions, such as offices, BPO firms and commercial stalls in shopping malls, etc. The findings were conclusive only for interior applications, as the results clearly suggest that the COPAP boards are not load-bearing. Future investigations may explore and assess other properties of COPAP boards like thermal and sound insulation, resistance to rot and other properties that may prove its competitive advantage as a construction material.

Background: Producing, distributing or discussing child sexual abuse materials (CSAM) is often committed through the dark web in order to remain hidden from search engines and regular users. Additionally, on the dark web, the CSAM creators employ various techniques to avoid detection and conceal their activities. The large volume of CSAM on the dark web presents a global social problem and poses a significant challenge for helplines, hotlines and law enforcement agencies. Objective: Identifying CSAM discussions on the dark web and uncovering associated metadata insights into characteristics, behaviours and motivation of CSAM creators. Participants and Setting: We have conducted an analysis of more than 353,000 posts generated by 35,400 distinct users and written in 118 different languages across eight dark web forums in 2022. Out of these, approximately 221,000 posts were written in English and contributed by around 29,500 unique users. Method: We propose a CSAM detection intelligence system. The system uses a manually labelled dataset to train, evaluate and select an efficient CSAM classification model. Once we identify CSAM creators and victims through CSAM posts on the dark web, we proceed to analyze, visualize and uncover information concerning the behaviors of CSAM creators and victims. Result: The CSAM classifier, based on Support Vector Machine model, exhibited good performance, achieving the highest precision of 92.3\%, accuracy of 87.6\% and recall of 84.2\%. Its prediction time is fast, taking only 0.3 milliseconds to process a single post on our laptop. While, the Naive Bayes combination is the best in term of recall, achieving 89\%, and its prediction time is just 0.1 microseconds per post. Across the eight forums in 2022, our Support Vector Machine model detected around 63,000 English CSAM posts and identified near 10,500 English CSAM creators. The analysis of metadata of CSAM posts revealed meaningful information about CSAM creators and their victims, such as: (1) the ages and nationalities of the victims typically mentioned by CSAM creators, (2) forum topics where the CSAM creators assign their posts, and (3) online platforms preferred by CSAM creators for sharing or uploading CSAM. Conclusion: Our CSAM detection system exhibits high performance in precision, recall, and accuracy in real-time when classifying CSAM and non-CSAM posts. Additionally, it can extract and visualize valuable and unique insights about CSAM creators and victims by employing advanced statistical methods. These insights prove beneficial to our partners, i.e. national hotlines and child agencies.

The aim of this systematic review is to describe and to identify prospect of β-Tricalcium Phosphate (β-TCP) as Alveolar Bone Grafting (ABG) in Cleft Lip/Palate (CL/P) or alveolar bone cleft defect. A systematic review protocol based on Preferred Reporting Items for Systematic Reviews and Meta Analyses 2020 (PRISMA 2020) was drafted. The literature search was conducted with MEDLINE/PubMed, Web of Science/ ISI-Web of Knowledge, Scopus and Cochrane Library with English language and no publication year limits. The keywords yielded a total of 5824 publications. There are 3196 suitable articles to evaluate after removing duplicates and languages. Afterward, 1315 studies left after doing title and abstract reading. In addition, 85 full-articles were assessed for eligibility. The read the complete texts of those papers and eventually chose 20 that matched the inclusion requirements. Thirteen of the twenty studies included in this systematic review had a low risk of bias, one had a high risk of bias, and six had moderate bias which not report the randomization. β-TCP as ABG is biocompatible, visible and practical, offers a less invasive procedure, and does not interfere with orthodontic treatment. β-TCP as synthetic ABG can be the alternative to autologous bone grafts with several terms and conditions. Improvement of β-TCP efficacy for ABG in CL/P or alveolar bone cleft defects can be done by a tissue engineering approach combining β-TCP with growth factor, mesenchymal stem cells, or other graft materials and modification of β-TCP physical properties.

The study of mechanical properties of rock mass can be effectively carried out through rock-like material model test. The similarity of mechanical properties between rock-like material and protolith is dependent on the appropriate selection of composition and content of rock-like materials. In this research, X-Ray diffraction test was conducted to analyze the composition of deep rock, which confirmed silica, quartz, and dolomite as the primary components of deep sandstone. An orthogonal design test was used to execute the ratio test of rock-like material. River sand was used as an aggregate, cement as a binder, gypsum powder as a regulator, and polystyrene foam (EPS) as rock damage simulation material. The influencing factors considered in the orthogonal mechanical tests were the proportion of aggregate and binder, ratio of binder and regulator, quantity of damage simulation material, and size of damage simulation material. Three levels were set for each factor, and mechanical parameters such as compressive strength, tensile strength, elastic modulus, axial strain, and Poisson's ratio were tested for each group of samples. The changes of those parameters with the levels of the above four factors were studied. The study revealed that adjusting the size of polystyrene foam (EPS) can adjust the values of elastic modulus, tensile strength, and Poisson's ratio of rock-like material. Similarly, changing the ratio of binder and regulator can adjust the values of axial strain and compressive strength of rock-like material. The rock-like material developed in the study can simulate the mechanical properties of different rock masses such as granite, sandstone, shale, and limestone.

The versatility of metal complexes of corroles raised the interest in the use of these molecules as element of chemical sensors. The tuning of the macrocycle properties by synthetic modification of the different components of the corrole ring, such as functional groups, molecular skeleton, and coordinated metal, allows the creation of a vast library of corrole-based sensors. However, the scarce conductivity of most of aggregates of corroles limits the development of simple conductometric sensors and requires the use of optical or mass transducers that are rather more cumbersome and less prone to be integrated in microelectronics systems. To compensate the scarce conductivity, corroles are often used to functionalize the surface of conductive materials such as graphene oxide, carbon nanotubes, or conductive polymers. Alternatively, they can be incorporated in heterojunction devices where they are interfaced with a conductive material such as a phthalocyanine. Herewith, we introduce two heterojunction sensors made of junctions of lutetium bisphthalocyanine (LuPc2) with either 5,10,15-tris(pentafluorophenyl) corrolato Cu (1) or 5,10,15-tris(4-methoxyphenyl)corrolato Cu (2). Optical spectra show that after forming the heterojunction, corroles maintain their original structure. The conductivity of the devices reveals an energy barrier for interfacial charge transport, which is larger in the 1/LuPc2 device. The different interfacial barriers is also manifested by the opposite response respect to ammonia: with a 1/LuPc2 behaving as a n-type conductor and 2/LuPC2 as a p-type conductor. Furthermore, the sensors show a high sensitivity respect to relative humidity with a reversible and fast response in the range 30-60%.