In obesity, white adipose tissue expresses inflammatory cytokines leading to insulin resistance. Non-physiological meta-tyrosine and ortho-tyrosine (meta-Tyr and ortho-Tyr), produced from phenylalanine by free radicals, may contribute to the development of insulin resistance. The resulting insulin resistance may have a significant impact on macrophage function. In this study we aim to investigate microscopically the effect of meta- and ortho-Tyr on insulin sensitivity and M1/M2 polarization of macrophages using Akt phosphorylation and the arginase 1/iNOS ratio. Macrophage cell lines were cultured in media containing para-, meta- or ortho-Tyr, 5 mmol/L or 25 mmol/L glucose (para25-Tyr group) and treated with insulin. Para25, meta- and ortho-Tyr increased pAkt levels and decreased the arginase 1/iNOS ratio in macrophages in the absence of insulin. In the case of physiological para-tyrosine treatment, insulin increased the amount of pAkt and decreased the arginase 1/iNOS ratio. Both meta- and ortho-Tyr treatment were able to abolish or reverse the insulin’s increasing effect on pAkt and the decreasing effect on arginase 1/iNOS ratio. Our results suggest that non-physiological tyrosine isomers may affect the insulin signaling of macrophages and influence their M1/M2 polarization.

This paper investigates the polarization and heat generation characteristics of batteries under different ambient temperatures and discharge rates by means of using a coupled electric-thermal model. The study found that the largest percentage of polarization is ohmic polarization, followed by concentration polarization and electrochemical polarization. The values of the three types of polarization are generally small and stable under normal-temperature environments and low-discharge rates. However, they increase significantly in low-temperature environments and high-discharge rates and continue to rise during the discharge process. Additionally, ohmic heat generation and polarization generation also increase significantly under these conditions. Reversible entropy heat is less sensitive to ambient temperature but increases significantly with the increase of the discharge rate. Ohmic heat generation and polarization heat generation contribute to the total heat generation of the battery at any ambient temperature, while reversible entropy heat only contributes to the total heat generation of the battery at the end of discharge.

The valley pseudospin properties of electrons in two–dimensional hexagonal materials result in lots of fascinating physical phenomena, which opens up the new field of valleytronics. The valley-contrasting physics aims at distinguishing the valley degree of freedom based on valley–dependent effects. Here, we theoretically demonstrate that both of the valley–selective high harmonic generation and valley–selective electronic excitation can be achieved by using an orthogonal two–color (OTC) laser field in gapped graphene. It is shown that the asymmetry degrees of harmonic yields in the plateaus, cutoff energies of generated harmonics and electron populations from two different valleys can be precisely controlled by the relative phase of the OTC laser field. Thus the selectivity of the dominant valley for the harmonic radiation and electronic polarization can be switched by adjusting the relative phase of the OTC laser field. Our work offers an all–optical route to produce the valley–resolved high harmonic emissions and manipulate the ultrafast valley polarization on a femtosecond timescale in condensed matter.

Eicheon properties are discussed. It is shown that the eicheon surface allows setting a boundary condition for the vacuum polarization and obtaining a solution describing the dark matter tail in the Milky Way. That is, the dark matter in the Milky Way is explained as the F-type of vacuum polarization, which could be treated as dark radiation. The model presented is spherically symmetric, but a surface density of a baryonic galaxy disk is taken into account approximately by smearing the disk over a sphere. This allows the reproduction of the large distance shape of the Milky Way rotational curve. Andromeda's rotational curves are also discussed.

This article presents the development of an innovative Maximum Power Point Tracking (MPPT) strategy, utilizing a Particle Swarm Optimization (PSO) algorithm to improve the effectiveness of PV systems and expedite convergence. The new MPPT method incorporated a unique Swarm Self-Reinforcement Mechanism (SSRM) within the PSO algorithm, targeting quick convergence and excellent tracking accuracy. This approach enables the PSO to eliminate the fitness function that has the lowest value and subsequently reinforce it in the next iteration, revolving around the global maximum power point (GMPP). By applying this novel PSO-based method, the MPPT performance of PV systems was significantly improved, facilitating the algorithm to proficiently navigate through the solution space and quickly locate the GMPP, even in rapidly changing environmental conditions. The outcomes derived from this novel approach were contrasted with other algorithmic optimization methods, validating its superior convergence speed and tracking accuracy. Different swarm sizes were examined using SSRM, and the optimal swarm size for the system employing MPPT was identified to achieve the lowest convergence time (CT). The results showcased the impressive performance capabilities of this novel strategy, resulting in a time con-traction of up to 28% compared to the conventional PSO technique, where the optimal swarm size was found to be 5. This achievement marks a significant milestone in the evolution of PSO-based MPPT techniques, and paves the way for future advancements in this exciting field.

Over the years, the Egyptian temples at Luxor city have been intensely investigated, but most of these studies just focused on the classical sides of the archaeological and historical descriptions. Many of the environmental problems are inevitable results of the unplanned urban crawling around the monuments temples. This paper aims at assessing the environmental changes around some temples of Luxor City using Remote sensing and GIS techniques. In particular, a historical database made up of Corona and Landsat TM data have been investigated along with the new acquisitions of Quickbird2 and Sentinel2. Results from our investigation highlighted rapid changes in urban and agricultural areas, which adversely affected the Egyptian monumental temples causing serious degradation phenomena. Using the information obtained from our RS&GIS based analysis, mitigation strategies have been also identified for supporting the preservation of the archaeological area.

With the constant growth of Software Defined Radio (SDR) technologies in wireless communications related fields the need for efficient ways to test and evaluate the Physical Layer (PHY) protocols developed for these technologies in real life traffic scenarios become more critical. This paper proposes a software testbed that enhances the creation of network environments that allow feeding GNU Radio applications with test traffic in a simple way and through an interoperable interface. This makes possible the use of any traffic generator, existent one or custom built to evaluate the GNU Radio application. In addition, the paper proposes an efficient way to collect PHY layer specific monitoring data that improves the performance of the critical components of the message delivery path by employing the Protocol Buffers library. The paper considers the entire testing and evaluation ecosystem and demonstrates how PHY layer specific monitoring information is collected, handled, stored, and processed as time series allowing complex visualization and real time monitoring.

Programmable Object Interfaces are increasingly intriguing researchers because of their broader applications, especially in the medical field. In Wireless Body Area Network (WBAN), for example, the patients’ health can be monitored using clinical nano sensors. Exchanging such sensitive data requires a high level of security and protection against attacks. To that end, the literature is rich with security schemes that include the advanced encryption standard, secure hashing algorithm, and digital signatures that aim to secure the data exchange. However, such schemes elevate the time complexity rendering the data transmission slower. Cognitive Radio technology with a medical body area network system involves communication links between WBAN gateways, server and nano sensors rendering the entire system vulnerable to security attacks. In this paper, a novel DNA-based encryption technique is proposed to secure medical data sharing between sensing devices and central repositories. It has less computational time throughout authentication, encryption, and decryption. Our analysis of experimental attack scenarios shows that our technique is better than its counterparts.

A software defined radio (SDR) is a communication system that makes use of components that can be configured through software, in contrast to traditional systems where these components are variable through hardware, these radio devices are much more versatile, this article describes the factors that must be considered when implementing a communication system based on Software Defined Radios (SDR), in order to reduce the attenuation factors and thus obtain the maximum distance for a transmission of data effectively in the UHF band. The calculations made for the first Fresnel zone and for the design of the Ground Plane type antennas used in the transmission/reception stages of the x40 bladeRF platforms are also presented. The tests were carried out at the facilities of the Huarangal Nuclear Center of the Peruvian Institute of Nuclear Energy, obtaining favorable results that allow ratifying the versatility and performance of the SDRs.

A case study is presented which demonstrates the value and validity of a novel approach to the use of consolidated amateur (‘ham’) radio reception reports as indicators of the presence of intense ionospheric sporadic E (Es). It is shown that the use of amateur data can provide an important supplement to other techniques, allowing the detection and tracking of Es where no suitable ionosonde or other measurements are available. The effectiveness of the approach is demonstrated by reference to ionosonde data, and the advantages and limitations of the technique are discussed.

Radio Frequency Interference (RFI) detection and characterization play a critical role to in ensuring the security of all wireless communication networks. Advances in Machine Learning (ML) have led to the deployment of many robust techniques dealing with various types of RFI. To sidestep an unavoidable complicated feature extraction step in ML, this paper proposes an efficient end-to-end method using the latest advances in deep learning to extract the appropriate features of the RFI signal. Moreover, this study utilizes the benefits of transfer learning to determine both the type of received RFI signals and their modulation types. To this end, the scalogram of the received signals is used as the input of the pre-trained convolutional neural networks (CNN), followed by a fully-connected classifier. This study considers a digital video stream as the signal of interest (SoI), transmitted in a real-time satellite-to-ground communication using DVB-S2 standards. To create the RFI dataset, the SoI is combined with three well-known jammers namely, continuous-wave interference (CWI), multi- continuous-wave interference (MCWI), and chirp interference (CI). This study investigated four well-known pre-trained CNN architectures, namely, AlexNet, VGG-16, GoogleNet, and ResNet-18, for the feature extraction to recognize the visual RFI patterns directly from pixel images with minimal preprocessing. Moreover, the robustness of the proposed classifiers is evaluated by the data generated at different signal to noise ratios (SNR).

This paper presents several novel designs of underwater portable radio antennas operating in the 2 MHz, 50 MHz and 2.4 GHz bands and efficient for launching surface electromagnetic waves at the seawater/air interface. The antenna operation is enabled by an impedance matching antenna enclosure, which is filled with de-ionized water. Enhanced coupling to surface electromagnetic waves is based on the field enhancement at the antenna tip. These design features allow us to reduce antenna dimensions and improve the coupling of electromagnetic energy to the surrounding saltwater medium. Since surface wave propagation length far exceeds the skin depth of conventional radio waves at the same frequency, this technique is useful for broadband underwater wireless communication over distances, which far exceed the skin depth in seawater. We conclude that the developed broadband underwater radio communication technique will be useful in networking of unmanned underwater vehicles.

Radio-fluorogenic (RFG) gels become permanently fluorescent when exposed to high-energy radiation with the intensity of the emission proportional to the local dose of radiation absorbed. An apparatus is described, FluoroTome 1, that is capable of taking a series of tomographic images (thin slices) of the fluorescence of such an irradiated RFG gel on-site and within minutes of radiation exposure. These images can then be compiled to construct a 3D movie of the dose distribution within the gel. The historical development via a laboratory-bench prototype to a readily transportable, user-friendly apparatus is described. Instrumental details and performance tests are presented.

Monitoring of groundwater quality in today's scenario is very much important. Due to urbanization and population pressure regular monitoring of groundwater for drinking as well as irrigation purposes need a major concern. With this aim, a study has been carried out consisting 26 groundwater samples in May 2017, to access the physiochemical characteristic, water quality index (WQI) of groundwater by using GIS software and to find out the groundwater suitableness for drinking as well as for irrigation purpose. The pH is slightly alkaline and the TDS is much more than prescribed limits of BIS. The trend of cations in groundwater are Ca2+>Na+>Mg2+>K+ while anions trend is HCO3->SO42->Cl->NO3->CO32->F-. The Ca-Mg-HCO3 and Na-K-Cl-SO4 types of groundwater facies were dominant. Generally, the chemical changes in groundwater are administered by the evaporation process with ion exchange, and mixing of particles is the significant source of the solute acquisition process. WQI of the study area suggested that the 15% sample is unsuitable, 69% is poor and remaining is good for drinking uses. The potential salinity of the groundwater sample is nearly high although the majority of the sample is suited for irrigation activities.

This paper uses the complex regression analysis method to establish the customer’s load regression models, which consider economic indicators, temperature and rainfall. Furthermore, the proposed models are used to study the forecasting feasibility of the future energy sales and summer peak load demand. At first, this paper used least-squares techniques to derive regression models for considering economic indicators and temperature of 34 customer energy sales and total energy sales. Besides, the AMI high voltage customer demand data and system generating capacity for 24 hours were adopted to forecast summer peak load. The above-mentioned data analysis tool is used by EViews software to achieve, in order to verify the feasibility of the research framework. The study found that although its forecasting model accuracy is low only when mixed with temperature and high voltage demands. So, when mixed with high voltage demand data and system generating capacity for 24 hours to forecast peak load, the average error is ± 0.87% and in the majority of its energy sales forecasting model of average error is ±3%. This result can provide power company as future reference.

Naive CD4+ T cells engage cognate peptide MHC-II complexes (pMHC-IIs) to differentiate and acquire one of several T helper (Th) fates whose specific trajectories are guided by a dynamic cytokine milieu that develops in response to antigenic entity. This physiological process is often erroneously conflated with a pathological one termed Th polarization. Using the SPIRAL model, we argue here that unlike Th fate choice, innate signaling alone is insufficient to initiate Th polarization in naive CD4+ T cells, that it instead develops from pre-existing memory CD4+ T cells that express cross-reactive TCRs, and that it inevitably leads to immunopathology.

Sentinel-1 (S1) extra-wide (EW) swath data in cross-polarization (horizontal-vertical, HV or vertical-horizontal, VH) are strongly affected by the scalloping effect and thermal noise, particularly over areas with weak backscattered signals, such as sea surfaces. Although noise vectors in both the azimuth and range directions are provided in the standard S1 EW data for subtraction, the residual thermal noise still significantly affects sea ice detection by the EW data. In this paper, we improve the denoising method developed in previous studies to remove the additive noise for the S1 EW data in cross-polarization. Furthermore, we propose a new method for eliminating the residual noise (i.e. multiplicative noise) at the sub-swath boundaries of the EW data, which cannot be well processed by simply subtracting the reconstructed 2-D noise field. The proposed method of removing both the additive and multiplicative noise was applied to EW HV-polarized images processed using different Instrument Processing Facility (IPF) versions. The results suggest that the proposed algorithm significantly improves the quality of EW HV-polarized images under various sea ice conditions and sea states in marginal ice zone (MIZ) of the Arctic. This is of great support for the utilization of cross-polarization SAR images in wide swaths for intensive sea ice monitoring in polar regions.

The modern era of polarimetric radar begins with radiowave propagation research starting in the early 1970s with applications to measurement and modeling of wave attenuation in rain and depolarization due to ice particles along satellite-earth links. While there is a rich history of radar in meteorology after World War II, the impetus provided by radiowave propagation requirements lead to high quality antennas and feeds. Our journey starts by describing the key institutions and personnel responsible for development of weather radar polarimetry. The early period was dominated by circularly polarized radars for propagation research and at S-band for hail detection. By the mid-to late 70s, a paradigm shift occurred which led to the dominance of linear polarizations with applications to slant path attenuation prediction as well as estimation of rain rates and inferences of precipitation physics. The period from early 1980s to 1995 can be considered as the “golden” period of rapid research that brought in meteorologists, cloud physicists and hydrologists. This article describes the evolution of this technology from the vantage point of the authors. Their personal reflections and “behind the scenes” descriptions offer a glimpse into the inner workings at several key institutions which cannot be found elsewhere.

Plant secondary metabolites are organic compounds (alkaloids, flavonoids, phenolics, tannins, anthraquinones, saponins, steroids, lignins, terpenes) produced by plant for self-defense during growth and development in order to protect them from harmful agents. As population is increasing and quality of life is reducing couple with outbreak of some diseases that are posing threat on the economy, a lot of medicinal plants have attracted interest of researchers because of the usefulness of these metabolites in pharmaceuticals, food and cosmetic industries. In this review, the pharmacological activities of some medicinal plants that are rich in secondary metabolites were studied, means of identifying and quantifying using spectrophotometry and chromatography techniques were also discussed. However, this will assist to reduce the uses and dependent on the synthetic drug and the onset of the age related diseases.

From December 2021 to May 2022, MeteoSwiss and Meteomatics conducted a proof of concept to demonstrate the capability of Meteodrones to provide data of sufficient quality and reliability on a routine operational basis. Over 6 months, Meteodrones MM-670 were operated automati-cally 8 times per night at Payerne, Switzerland. 864 meteorological profiles were measured and compared to co-located standard measurements including radiosoundings and remote-sensing instruments. To our knowledge, it is the first time that Meteodrone’s atmospheric profiles are evaluated in such an extensive campaign. The paper highlights two case studies that showcase the performance and challenges of measur-ing temperature, humidity, and wind with a Meteodrone. It also focuses on the overall quality of the drone measurements. Throughout the campaign, the availability of Meteodrone measure-ments was 75.7%, with 82.2% of the flights reaching the nominal altitude of 2000m above sea level. To assess the quality of the Meteodrone measurements, the radiosondes were used as a refer-ence, comparing them to the WMO (World Meteorological Organization) requirements [1]. The temperature measurements by the Meteodrone met the "breakthrough" target, while the humid-ity and wind profiles met the "threshold" target for high-resolution numerical weather predic-tion. The temperature measurement quality was comparable to that of a microwave radiometer, and the humidity quality was similar to that obtained from a Raman Lidar. However, the wind measurements by a Doppler Lidar were more accurate than the estimation provided by the Me-teodrone. During this campaign, the data quality could be improved and at the end of the campaign, Me-teodrone quality reached the “goal” target for temperature and the “breakthrough” target for humidity. This campaign marks a significant step towards the operational use of automatic drones for me-teorological applications.

In recent years, significant progress has been observed in cloud computing. As the number of companies using the cloud increases, so does the need to protect user data. Today, the major challenges facing cloud computing include the security, protection, and processing of data belonging to users. This study aims to investigate security issues and identify appropriate security techniques in the world of cloud computing. Also, the identification of security challenges that may arise in the field of cloud computing in the future has been evaluated. In this research, we used two different research methods: systematic literature review (SLR), and survey and interview with different security experts who work in the field of cloud computing. All the security challenges, most compromised attributes, and identified mitigation techniques from both SLR and survey were presented and discussed.

Background: Strongyloidiasis, a neglected disease caused by intestinal nematodes of the genus Strongyloides, is endemic to tropical and subtropical areas such as Vietnam. The morphological diagnosis of larvae by Hara Mori culture technique and microscopicare are considered the standard diagnostic procedures in the endemic areas of Strongyloides spp. However, they could only identify the genus, not the species of Strongyloides. DNA-molecular techniques which are highly sensitive and more cost-effective have been increasingly utilized in detection of Strongyloides species. This study aims to determine prevalence and the species of Strongyloides among resident population in Duc Hoa district, Long An province, Southern Vietnam. Methods: A cross-sectional study was conducted using 1,190 stool samples collected in Duc Hoa district, Long An province, Vietnam, from July, 2017 to November 2018. The stool specimens were transported to the Laboratory of Medical Parasitology, Pham Ngoc Thach University of Medicine within two hours of collection at an appropriate temperature of 25 oC. All samples were stored at 2 - 8°C and processed within 48 hours for microscopic examination. Molecular detection was carried out at Laboratory of Molecular Biology, Pham Ngoc Thach University of Medicine, Hochiminh city, VietNam. Results: Of the 1,190 samples tested, Strongyloides spp. larvae were detected in 79 specimens (6.6%) by two classical parasitological methods, namely direct microscopy and the modified Harada-Mori filter paper culture. DNA was extracted from 70 of the 79 samples of Strongyloides spp. larvae, which was subsequently characterized by real-time PCR amplification of the 18S and 28S regions of the rDNA gene. The results showed that 97.1% of the DNA samples were S. stercoralis, 2.9% were co-infections with S. ratti and S. stercoralis, and 2.9% belonged to S. ratti. For all 14 isolates, nucleotide sequencing was compared with other human pathogenic species of Strongyloides whose sequences are available in GenBank. The identity of 12/14 sequences were confirmed as S. stercoralis with a high level of similarity (91.3% - 100%) and over 98% for S. ratti. Between the two co-infection samples, the higher similarity belonged to S. stercoralis. Conclusion: A molecular amplification of small subunit ribosome RNA followed by sequence analysis has been proved to be a suitable method for discrimination of Strongyloides spp. retrieved from stool samples.

Marine clay deposits are commonly found worldwide. Considering the cost of dumping and the related environmental concerns, an alternative solution involving the reuse of soils that have poor conditions is crucial. In this research, the authors examined the durability of marine deposited clays and compiled a corresponding database. The use of slag alone as a binder, at any percentage, increased the accumulated mass loss (ALM) up to 2%. However, the use of lime as the third binder seemed to accelerate the chemical reactions associated with the hydration of clay and cementitious material and to enhance the chemical stability, i.e., samples that included both lime and slag experienced the same ALM as samples treated with cement only. Scanning electron microscopy analysis confirmed the durability improvements of these clays. The proposed unconfined compressive strength and accumulated mass loss relationship yielded practical approximation for the fine- and coarse-grained soils blended with up to three binders until 60 days of curing.

Increased severity of droughts, due to anthropogenic activities and global warming has imposed a severe threat on agricultural productivity ever before. This has further advanced the need for some eco-friendly approaches to ensure global food security. In this regard, application of plant growth-promoting rhizobacteria (PGPR) can be beneficial. PGPR through various mechanisms viz. osmotic adjustments, increased antioxidant, phytohormone production, regulating stomatal conductivity, increased nutrient uptake, releasing Volatile organic compounds (VOCs), and Exo-polysaccharide (EPS) production, etc not only ensures the plant’s survival during drought but also augment its growth. This review, extensively discusses the various mechanisms of PGPR in drought stress tolerance. We have also summarized the recent molecular and omics-based approaches for elucidating the role of drought responsive genes. The manuscript presents an in-depth mechanistic approach to combat the drought stress and also deals with designing PGPR based bioinoculants. Lastly, we present a possible sequence of steps for increasing the success rate of bioinoculants.

This study explores religious diversity in Romania and how the trends of indices of religious fractionalization and polarization manifest at the county level in the post-communist period. The county is selected as the relevant level for analysis due to its spatial confessional dynamics being more clearly visible. Recent studies have revealed that erosion of diversity represents an important aspect for any country and needs to be considered as an important aspect of democracy. This paper highlights that religious polarization and fractionalization in Romania has been generally maintained, although the regions of Transylvania, Banat, Dobrogea and Western Moldova remain areas where there are different confessions. Besides the general aspect of religion diversity depending the ethnic trends, there is a rise of Pentecostals and Baptists at the county level. This aspect can inform policymakers to create new institutions for dialogue between majority Orthodox communities and Protestants so that potential conflicts do not appear between the Orthodox and emerging religious communities, but also to ensure objective, cultural, religious coherence.

The microglia, displaying diverse phenotypes, play a significant regulatory role in the development, progression, and prognosis of Parkinson's disease. Research has established that glycolytic reprogramming serves as a critical regulator of inflammation initiation in pro-inflammatory macrophages. Furthermore, the modulation of glycolytic reprogramming has the potential to reverse the polarized state of these macrophages. Previous studies have shown that levetistilide A (LA), a phthalide component derived from Angelica sinensis, possesses a range of pharmacological effects, including anti-inflammatory, antioxidant, and neuroprotective properties. In our study, we have examined the impact of LA on inflammatory cytokines and glucose metabolism in microglia induced by lipopolysaccharide (LPS). Furthermore, we explored the effects of LA on the AMPK/mTOR pathway and assessed its neuroprotective potential both in vitro and in vivo. The findings revealed that LA notably diminished the expression of M1 pro-inflammatory factors induced by LPS in microglia, while leaving M2 anti-inflammatory factor expression unaltered. Additionally, it reduced ROS production and suppressed IκB-α phosphorylation levels as well as NF-κB p65 nuclear translocation. Notably, LA exhibited the ability to reverse microglial glucose metabolism reprogramming and modulate the phosphorylation levels of AMPK/mTOR. In vivo experiments further corroborated these findings, demonstrating that LA mitigated the death of TH-positive dopaminergic neurons and reduced microglia activation in the ventral SNpc brain region of the midbrain and the striatum. In summary, LA exhibited neuroprotective benefits by modulating the polarization state of microglia and altering glucose metabolism, highlighting its therapeutic potential.

This study explores the innovative use of CO2 laser technology in frenuloplasty, a significant shift from traditional methods like scalpel surgery or electrocautery, towards a minimally invasive approach. The research involved 15 patients aged 25 to 50, undergoing frenuloplasty with a CO2 laser system equipped with a 7-inch defocused handpiece, set at 20Hz and 0.3W. This method diverges from conventional laser techniques, focusing on controlled laser passes combined with manual traction to elongate the fibrous tissue of the frenulum. The results demonstrated that the CO2 laser technique allowed for a precise and progressive modification of the frenulum, significantly reducing the risks of hemorrhage and secondary in-tention fibrosis. The healing process was notably expedited, with patients reporting satisfactory outcomes within a two-week period. Statistically significant improvements were observed in pa-tient-reported outcomes, as evidenced by the increases in the Short Form Health Survey (SF-12) scores, with the mean Physical Component Summary (PCS) score rising from 32.5 to 47.5 and the mean Mental Component Summary (MCS) score from 39.3 to 52.3 (p < 0.001 for both). The study concludes that CO2 laser frenuloplasty is an effective and safe technique, offering sub-stantial benefits in terms of reduced healing time and enhanced patient satisfaction. The signifi-cant improvements in SF-12 scores underscore the positive impact on patient quality of life, ad-vocating for the broader application of this technique in clinical practice. Further research is warranted to explore its potential in a wider clinical context.

Fruits are commonly used, fresh or processed, to prepare different industrial products with superior nutritional and health-promoting properties. Currently, the demand for processed fruit products has motivated the rapid growth of the fruit processing industries, persuading them to produce an enormous amount of by-products with less utilization. Furthermore, people's shifting dietary habits and lack of awareness of nutritional properties result in an avoidable load of fruit by-products. The knowledge of the value of by-products urges exploration with proper documentation, emphasizing the health benefits of some such products. Hence, this review is prepared by carefully analyzing the recent literature on industrial applications of fruit by-products and their nutritional and health-promoting properties. The use of fruit by-products in food industries for various purposes has been reported in the past and has been reviewed and described here. Fruit by-products are a good source of nutrients and bioactive components, including polyphenols, dietary fibers, and vitamins, implying that they could have an important role for novel, value-added functional food properties. Furthermore, fruit by-products are used as the substrate for the production of organic acids, essential oils, enzymes, fuel, biodegradable packaging materials, and preservatives.

First described in 1760 by the anatomist Morgagni, CoA is a congenital heart defect characterized by narrowing the aorta, typically distal to the left subclavian artery. It accounts for approximately 5-8% of all congenital heart diseases, with an incidence estimated at 4 per 10,000 live births. In 1944, the Swedish surgeon Clarence Crafoord achieved the first successful surgical CoA repair by performing an aortic end-to-end anastomosis on two patients aged 12 and 27 years old. Presently, the most prevalent techniques for surgical repair, particularly in infants and neonates with isolated coarctation, involve resection with end-to-end anastomosis (EEA) and the modified Crafoord technique (extended resection with end-to-end anastomosis (EEEA)). Subclavian flap aortoplasty (SCAP) is an alternative surgical option for CoA repair in patients under two years of age. In cases where the stenosis extends beyond resection and end-to-end anastomosis feasibility, patch aortoplasty (PP) employing a prosthetic patch can augment the stenotic region, especially for older patients. Despite advances in pediatric cardiology and cardiac surgery, recoarctation remains a significant concern after surgical or interventional repair. This comprehensive review aims to provide a thorough analysis of coarctation management, covering the pioneering techniques introduced by Crafoord using head-to-tail anastomosis and now extending to the contemporary era marked by percutaneous interventions as well as the recoarctation rate associated with each type.

In the last ten years, plasma waste treatment has gained increasing prominence as a technology in response to growing challenges in waste disposal and the recognition of opportunities for generating valuable by-products. The efficiency and outcomes of this process are intricately linked to the characteristics of the plasma involved, such as plasma enthalpy and heat flux. We employed an experimental radio frequency inductively coupled plasma (RF-ICP) torch operating at atmospheric pressure to generate plasma. Utilizing optical emission spectroscopy (OES), we measured plasma parameters, specifically the effective electron temperature (Teff) and plasma density (ne), while varying argon gas flow rates and RF powers. Our investigations revealed that both flow rate and RF power exert significant control over plasma parameters, and we observed an unusual phenomenon within this range of discharge pressures. Consequently, both the plasma's enthalpy and the heat flux it generates are influenced by variations in both flow rate and RF power.

Abstract: We review the development and application of an organic polymer-gel capable of producing fixed, three-dimensional fluorescent images of complex radiation fields. The gel consists for more than 99% of γ-ray-polymerized (~15% conversion) tertiary-butyl acrylate (TBA) containing ~100 ppm of a fluorogenic compound, e.g. maleimido-pyrene (MPy). The radio-fluorogenic effect depends on copolymerization of the MPy into growing chains of TBA on radiation-induced polymerization. This converts the maleimido residue, which quenches the pyrene fluorescence, into a succinimido moeity (SPy), which doesn't. The intensity of the fluorescence is proportional to the yield of free-radicals formed and hence to the local dose deposited. Because the SPy moieties are built into the cross-linked polymer matrix the image is fixed. The method of preparing the gel and imaging the radiation-induced fluorescence are presented and discussed. The effect is illustrated with fluorescent images of the energy deposited in the gel by beams of X-rays, electrons and protons as well as a radioactive isotope.

In this paper we demonstrate first ever dual-period diffraction gratings that do not require electrical tuning to obtain the effect of period change. Our method allows for multiplication of the base period by proper modification of the subsequent slits of the grating. The proposed elements are fabricated by selective photopolymerization of a composite based on nematic liquid crystal. The gratings are formed by polymer stabilization of liquid crystal in different orientations of the molecules in selected grating slits to allow for period manipulation. The operating principle is based on changing the phase delay introduced by the slits depending on polarization direction of incident light with respect to the director in each type of slit, which allows to change the grating’s period. The proposed technique was successfully utilized to obtain diffraction gratings with either doubling or tripling of the period.

Social media platforms are not serving only as tools of communication rather they are acting like intricate systems managing our interactions. A major setback to our interactions occur when the flow of information in these networks gets distorted through polarization. It resembles a society where every debate turns into divide. Our research focuses exclusively on quantifying polarization as well as solving this issue head-on. In order to accurately gauge polarization, we’ve developed a new method that takes into consideration majority of its influencing factors. This helps us in correctly quantifying the polarization value of a given network and then by proposing it as an optimization problem we are attempting to maximally decrease polarization while staying within the set budget. We test our method on synthetic and real-world data sets, and find out that polarization is declining, and diversity is increasing. This proves that our recommendation engine has a penchant for finding the ideal connections between the nodes to start a dialogue. Our research presents a successful tactic to quantifying and reducing polarization in social media networks. The results indicate that our novel metric and intervention technique are effective in dismantling echo chambers, thereby promoting diversity in these networks.

Directional modulation (DM), as an emerging promising physical layer security (PLS) technique at the transmitter side with the help of an antenna array, has developed rapidly over decades. In this study, a DM technique using a polarization sensitive array (PSA) to produce the modulation with different polarization states (PSs) at different directions is investigated. A PSA, as a vector sensor, can be employed for more effective DM for an additional degree of freedom (DOF) provided in the polarization domain. The polarization information can be exploited to transmit different data streams simultaneously at the same directions, same frequency, but with different PSs in the desired directions to increase the channel capacity, and with random PSs off the desired directions to enhance PLS. The proposed method has the capability of concurrently projecting independent signals into different specified spatial directions while simultaneously distorting signal constellation in all other directions. The symbol error rate (SER), secrecy rate, and the robustness of the proposed DM scheme are analyzed. Design examples for single- and multi-beam DM systems are also presented. Simulations corroborate that 1) the proposed method is more effective for PLS; 2) the proposed DM scheme is more power-efficient than the traditional artificial noise aided DM schemes; and 3) the channel capacity is significantly improved compared with conventional scalar antenna arrays.

Jaundice is a common condition for newborns, and its complications can be severe and cause permanent damage to the patient’s brain if no action is taken at its early stages. Current methods for jaundice detection are invasive, which include collecting blood samples from the patient, which can be painful and stressful and may cause some complications. Alternatively, a non-invasive approach can be used to diagnose jaundice through image-processing and artificial intelligence (AI) techniques, requiring a database of infant images to achieve a high-accuracy diagnosis. This data article provides a collection of newborn images, called NJN, with various birthweight and skin tones, with ages ranging from 2 to 8 days, and an excel sheet file in CSV format for the values of RGB and YCrCb channels and the status for each raw which is freely accessible at (https://sites.google.com/view/neonataljaundice). It also provides Python code for data testing using different AI techniques. Thus, this article offers a unique resource for all AI researchers to train their AI system and develop algorithms to help neonatal intensive care unit (NICU) healthcare specialists monitor neonates and provide fast, real-time, non-invasive, and accurate jaundice diagnosis.

Dibutyl phthalate (DBP) is widely used as a plasticizer in the production of polymeric materials to give them flexibility, strength and extensibility. However, due to its negative impact on human health, in particular, reproductive function and fetal development, the content of DBP must be controlled in food and environmental objects. The present study aims to develop a sensitive, fast and simple polarization fluorescent immunoassay (FPIA) using monoclonal antibodies derived against DBP (MAb-DBP) for its detection in open waters. New conjugates of DBP with various fluorescein derivatives were obtained and characterized: 5-aminomethylfluorescein (AMF) and dichlorotriazinylaminofluorescein (DTAF). The advantages of using the DBP-AMF conjugate in the FPIA method are shown, the kinetics of binding of this drug with antibodies is studied, the analysis is optimized, and the concentration of monoclonal antibodies is selected for sensitive analysis - 16 nM. The calibration dependence of the fluorescence polarization signal for the detection of DBP was obtained. The observed IC50 (40 ng/mL) and LOD (10 ng/mL) values were improved by a factor of 35 for the previously described FPIA using polyclonal antibodies. This technique was tested by the added/found method, the percentage of DBP discovery in water ranged from 85 to 110%. Using the developed method, real water samples from Lake Onega were tested, and a good correlation was shown between the results of the determination of DBP by the FPIA method and GC-MS/MS. Thus, the FPIA method developed in this work can be used to determine DBP in open water reservoirs.

The low water solubility of any pharmacoactive molecules limits their pharmacological potential but the solubility parameter cannot compromise, so different approaches are employed to enhance their bioavailability. Pharmaceutically active molecules with low solubility convey a higher risk of failure for drug innovation and development. Pharmacokinetics, pharmacodynamics, and several other parameters, such as drug distribution, protein binding and absorption, are majorly affected by their solubility. Among all pharmaceutical dosage forms, the oral dosage forms cover more than 50 %, and the drug molecule should be water-soluble. For good therapeutic activity by the drug molecule on the target site, solubility and bioavailability are crucial factors. The pharmaceutical industry screening programs identified that around 40% of new chemical entities (N.C.E.s) face various difficulties at the formulation and development step. These pharmaceuticals are attributed to their less solubility and bioavailability. The bioavailability and drug solubility enhancement are significant challenges in the area of pharmaceutical formulations. According to the Classification of Biopharmaceutics, Class II and IV drugs (APIs) exhibits poor solubility, lower bioavailability, and less dissolution. Various technologies are discussed in this article to improve the solubility of the poorly water-soluble drug, for example, complexation of active molecules, utilization of emulsion formation, micelles, microemulsions, cosolvents, polymeric micelles preparation, particle size reduction technologies, pharmaceutical salts, prodrugs, solid-state alternation technique, soft gel technology, drug nanocrystals, solid dispersion methods, crystal engineering techniques and nanomorph technology. This review mainly describes several other advanced methodologies for solubility and bioavailability enhancement, such as crystal engineering, micronization, solid dispersions, nano sizing, use of cyclodextrins, solid lipid nanoparticles, colloidal drug delivery systems and drug conjugates, by some appropriate research reports.

In 2011, by 1.3 mm wavelength VLBI radio wave observations of the SgrA*, Fish, V. L. et al showed that the emissions tightly related to the formation of a black hole shadow have a remarkably large time-varying feature within a region of less than 50 μas. The present paper suggests that the origin of the time variation in the observed emission is due to effects of the orbital motion of the existing super-massive black hole binary orbiting at SgrA* with a period of 2150±2.5 s. This suggestion is based on observations of decameter radio wave pulses from SgrA*. We show a good correlation between the time variation in the coherent flux density of the VLBI results and the time variation model of estimated emission intensities based on the periodic motion of the super-massive black hole binary by applying parameters deduced from the decameter radio wave pulse observation model (DRWP-Model). With further confirmation by Fourier analyses of the potential periodicity of the VLBI data that show the same periods of DRWP Model, we conclude that the time variation detected by the 1.3 mm wavelength radio wave VLBI is evidence of an existing super-massive black hole at Sgr A*.

Cardiomyopathies (CMPs) are a group of myocardial disorders that are characterized by structural and functional abnormalities of the heart muscle. These abnormalities occur in the absence of coronary artery disease (CAD), hypertension, valvular disease, and congenital heart disease. CMPs are an increasingly important topic in the field of cardiovascular diseases due to the complexity of their diagnosis and management. In 2023, the ESC guidelines on cardiomyopathies were first published, marking significant progress in the field. The growth of techniques such as cardiac magnetic resonance imaging (CMR) and genetics has been fueled by the development of multimodal imaging approaches. For the diagnosis of CMPs, a multimodal imaging approach, including CMR, is recommended. CMR has become the standard for non-invasive analysis of cardiac morphology and myocardial function. This document provides an overview of the role of CMR in CMPs, with a focus on tissue mapping. CMR enables the characterization of myocardial tissues and the assessment of cardiac functions. CMR sequences and techniques, such as late gadolinium enhancement (LGE) and parametric mapping, provide detailed information on tissue composition, fibrosis, edema, and myocardial perfusion. These techniques offer valuable insights for early diagnosis, prognostic evaluation, and therapeutic guidance of CMPs. The use of quantitative CMR markers enables personalized treatment plans, improving overall patient outcomes. This review aims to serve as a guide for the use of these new tools in clinical practice.

Wireless cellular communication technology has developed into a very resourceful commodity worldwide. Today, people of all races can hardly live without means of voice and data cellular communication technology. Imprecise propagation loss estimation leads to high power waste, high co-channel interference and poor service quality in cellular communication system networks. This paper proposes a realistic adaptive fine-tuning method for distinctive propagation loss estimation over a microcellular communication radio links based on signal power measurements from Long Term Evolution radio broadband networks, taking non-line of sight (NLOS) and line of sight (LOS) environments into consideration. The methodology is verified by measurements taken in non-line of sight and line of sight signal propagation scenarios. The results showed that the estimated propagation losses using the proposed realistic adaptive tuning models were more accurate than the existing Cost -231 modelling estimation approach

Wireless cellular communication technology has developed into a very resourceful commodity worldwide. Today, people of all races can hardly live without means of voice and data cellular communication technology. Imprecise propagation loss estimation leads to high power waste, high co-channel interference and poor service quality in cellular communication system networks. This paper proposes a realistic adaptive fine-tuning method for distinctive propagation loss estimation over a microcellular communication radio links based on signal power measurements from Long Term Evolution radio broadband networks, taking non-line of sight (NLOS) and line of sight (LOS) environments into consideration. The methodology is verified by measurements taken in non-line of sight and line of sight signal propagation scenarios. The results showed that the estimated propagation losses using the proposed realistic adaptive tuning models were more accurate than the existing Cost -231 modelling estimation approach.

Pathological Brain Detection (PBD) is a crucial field aimed at identifying and diagnosing structural or functional abnormalities in the brain related to neurological, neurodegenerative, or psychiatric disorders. This detection process typically employs medical imaging technologies such as MRI, CT, or PET scans, along with neurological evaluations, blood tests, and other diagnostic tools. Early detection is essential for effective treatment, improving prognosis, and enhancing the quality of life for affected individuals. Each common computational method provides unique insights into brain pathologies. Despite significant advancements in technology and methodology, PBD faces challenges such as variability in brain anatomy, the complexity of disorders, data quality, standardization issues, interpretability of models, and ethical concerns. Addressing these challenges necessitates collaboration among researchers, clinicians, and policymakers to develop robust and ethical methods for improving the detection and diagnosis of brain disorders.

The objective of this research is to mitigate vibrations in induction motors. To achieve this goal, a discontinuous pulse width modulation (PWM) control strategy based on carrier wave modulation is proposed for multilevel inverters. This study provides justification for the reduction of machine vibrations compared to existing control techniques documented in the technical literature. Additionally, the proposed technique offers the advantage of attenuating the Total Harmonic Distortion of the multilevel inverter's output voltage while simultaneously achieving a higher RMS value for the same DC level. By modifying a parameter of the carrier wave, the control strategy allows for variations in the electrical spectrum while avoiding natural mechanical resonance frequencies, thereby reducing motor vibrations. Laboratory results demonstrating the application of different modulation strategies in a multilevel inverter for an induction motor and a comparison with the presented strategy are provided.

In order to remain competitive in the highly competitive construction industry, it is crucial for construction organizations to continually improve their overall performance, as project performance is a key determinant of their relevance. Despite the industry's competitiveness and risk, it has been reported that the construction industry has the lowest return margins compared to other industries (Jackson, 1999), suggesting that the project performance of construction organizations in the industry has not been up to par. This issue can be attributed to several factors, with motivation being the primary factor. Unfortunately, motivation is often disregarded in the construction industry due to the short duration of many construction projects and the high rate of employee turnover. The impact of employee dissatisfaction and related work attitudinal problems on performance in the construction industry is a matter of concern, particularly in developing countries where working conditions may be unappealing. The severity of this issue cannot be overstated.The objective of this research is to evaluate the effectiveness of motivational techniques in enhancing project performance in Nigeria. The study employed a survey research design and targeted the management staff of construction firms in Lagos State, Nigeria. The questionnaire was used to collect data, and the respondents were purposively selected from the population. Data analysis was conducted using percentage, mean ranking, and chi-square. The findings reveal that the opportunity to learn new skills, with a mean score of 0.85, and wage increment, with a mean score of 0.82, were the most widely adopted motivational techniques for management staff and skilled labor, respectively, in construction firms. Additionally, the study found that most of the motivational schemes tested did not produce statistically significant results, indicating low adoption and limited effectiveness in enhancing project performance. As a result, it is suggested that construction companies in Nigeria should implement and enforce financial and non-financial incentives to enhance the performance of their employees and consequently, improve project performance.

With compact footprint, low energy consumption, high scalability, and mass producibility, chip-scale integrated devices are an indispensable part of modern technological change and development. Recent advances in two-dimensional (2D) layered materials with their unique structures and distinctive properties have motivated their on-chip integration, yielding a variety of functional devices with superior performance and new features. To realize integrated devices incorporating 2D materials, it requires a diverse range of device fabrication techniques, which are of fundamental importance to achieve good performance and high reproducibility. This paper reviews the state-of-art fabrication techniques for the on-chip integration of 2D materials. First, an overview of the material properties and on-chip applications of 2D materials is provided. Second, different approaches used for integrating 2D materials on chips are comprehensively reviewed, which are categorized into material synthesis, on-chip transfer, film patterning, and property tuning / modification. Third, the methods for integrating 2D van der Waals heterostructures are also discussed and summarized. Finally, the current challenges and future perspectives are highlighted.

By introducing a suitable renormalization process the charge carrier and phonon dynamics of a double-stranded helical DNA molecule is expressed in terms of an effective Hamitonian describing a linear chain, where the renormalized transfer integrals explicitly depend on the relative orientations of the Watson-Crick base pairs, and the renormalized on-site energies are related to the electronic parameters of consecutive base pairs along the helix axis, as well as to the low-frequency phonons dispersion relation. The existence of synchronized collective oscillations enhancing the π-π orbital overlapping among different base pairs is disclosed from the study of the obtained analytical dynamical equations. The role of these phonon-correlated, long-range oscillation effects on the charge transfer properties of double standed DNA homopolymers is discussed in terms of the resulting band structure.

We have conducted a comprehensive year-long sampling campaign for particulate matter (PM) pollutants at a site near a major highway, following standard protocols. Total mass, and elemental and chemical composition of the fine fractions (PM2.5) of traffic-related pollutants are determined utilizing several complementary techniques. These complementary techniques included gravimetric analysis, X-ray fluorescence (XRF), scanning electron microscopy and energy dispersive spectroscopy, X-ray diffraction (XRD) and black carbon multi-wavelength absorption. The results show that the PM2.5 mass concentrations are within or slightly above international standards and include natural dust and anthropogenic pollutants such as black carbon, sulfates and other traffic-related elements. Anthropogenic sources include the secondary pollutants Mascagnite and Koktaite, traffic emissions such as exhaust emissions and tires, brakes and road erosions. It was found that the sulfates are the highest contributors to PM2.5 (~40%), as evident from XRD results and the S content in the XRF analysis.

The hybrid in-band on-channel (IBOC) transmission system as a digital audio radio scheme could transmit analog FM and digital audio simultaneously. In IBOC systems, broadcasters transmit signals within the allocated channel bands, so the bandwidth allocated for digital audio transmission is a big challenge. In view of the above, the use of cooperative game theory, supported by the use of the bankruptcy game and Shapley's value, is proposed as a strategy to optimize the bandwidth allocation at each node or station, according to the demand in the service, the number of stations and the radio channel conditions in the FM band. The paper proposes a scenario under saturated traffic conditions, in order to evaluate the degree of optimization that the Shapley value can perform under clearly established traffic and channel conditions. The evaluation process yielded a quite favorable result, where it is observed that the use of cooperative game theory supported by the Shapley value can be considered as an excellent alternative when performing bandwidth optimization processes for digital broadcasting over IBOC in FM and with the possibility of being implemented in other digital radio broadcasting systems.

This paper proposes a compact wideband split ring resonator (SRR) based C-shaped antenna for 5G new radio (NR) band n258 millimeter wave (mm-Wave). The proposed antenna covers a wideband frequency range from 24.1 GHz to 28.3 GHz with a reflection coefficient below -10 dB. Stubs are used at each C-shaped element for impedance matching of the antenna. The proposed antenna comprises SRRs with stubs to increase the bandwidth and gain simultaneously for better performance in mm-Wave applications. A simple SRR structure is modeled to function as a reactive impedance surface with inductive property for frequencies less than 30.2 GHz. The proposed antenna realizes an impedance bandwidth of 16.1% and covers a wideband of 4.2 GHz (24.1 GHz -28.3 GHz). The use of stubs and SRR has improved the performance of the proposed antenna at mm-Wave frequencies. Specifically, the deployment of the SRR is able to produce an improved gain for the overall direction of the antenna. The simulation and measured results agree well and maintain a 7.49 dBi gain with a bandwidth of 4.2 GHz. An average efficiency of 90% can be attained in the operating range of the antenna. The designed antenna is applicable for 5G NR Band n258.

It was recently demonstrated that a co-planar capacitive sensor could be applied to the evaluation of materials without the disadvantages associated with the other techniques. This technique effectively detects changes in the dielectric properties of the materials due to, for instance, imperfections or variations in the internal structure, by moving a set of simple electrodes on the surface of the specimen. An AC voltage is applied to one or more electrodes and signals are detected by others. This is a promising inspection method for imaging the interior structure of the numerous materials, without the necessity to be in contact with the surface of the sample. In this paper, Finite Element (FE) modelling was employed to simulate the electric field distribution from a co-planar capacitive sensor and the way it interacts with a non-conducting sample. Physical experiments with a prototype capacitive sensor were also performed on a Plexiglas sample with sub-surface defects, to assess the imaging performance of the sensor. A good qualitative agreement was observed between the numerical simulation and experimental result.

Polygonum sibiricum is a traditional Chinese food and medicine homologues with multiple active ingredients and extensive bioactive effects. Polygonum sibiricum polysaccharides (PSP) are one of the main active ingredients with the antidepressant activity, meanwhile the specific mechanisms of its action are still unclear. Recently, it is recognized by researchers that microglia play a double-edged role in neuroinflammation and the transformation of M1/M2 microglial phenotypes appears to be a potential therapeutic strategy in depression. Therefore, the present study evaluated the effects of PSP on microglial M1/M2 polarization and the molecular mechanisms were studied based on the lipopolysaccharide (LPS)-induced BV2 cell activation model. The results show that PSP significantly inhibited NO and LDH release and reduced ROS levels in LPS-induced BV2 cells. PSP could significantly reduce the protein expression level of Iba-1, decreased the mRNA levels of TNF-, IL-1 and IL-6, increased the mRNA level of IL-10. PSP also significantly reduced the protein expression level of CD16/32 and increased it of CD206, reduced the mRNA level and fluorescence intensity of iNOS and increased them of Arg-1. However, PSP pretreatment reversed the alterations of BDNF/TrkB/CREB and Notch/Hes1 pathways in LPS-induced BV2 cells. These results suggested that PSP exerted the anti-inflammatory effects by inhibiting M1 phenotype polarization and promoting microglia polarization toward M2 phenotype, and its regulation of microglia M1/M2 polarization may be associated with modulating the BDNF/TrkB/CREB and Notch/Hes1 pathways.

Macrophages are cells involved in the primary response to debris derived from wear of implanted CoCr alloys. The biocompatibility of wear particles from a high carbon CoCr alloy produced under polarization in physiological hyaluronic acid (HA) solution was evaluated in J774A.1 mouse macrophages cultures. Polarization was applied to mimic the electrical interactions observed in living tissues. Wear tests were performed in a pin-on-disk tribometer integrating an electrochemical cell in phosphate buffer solution (PBS) and in PBS supplemented with 0.3% HA, physiological synovial fluid concentration, used as lubricant solution. Wear particles produced in 0.3% HA solution showed a higher biocompatibility in J774A.1 macrophages in comparison to those elicited by PBS. A considerable improvement in macrophages biocompatibility in the presence of 0.3 % of HA was further observed by the application of polarization at potentials having current densities typical of injured tissues suggesting that polarization produces an effect on the surface of the metallic material that leads to the production of wear particles that are macrophages biocompatible and less cytotoxic. The results showed the convenience to consider electric interactions together with other particles parameters, as are size and composition, to get a better understanding of the biological effects of the wear products.

For the elimination of radio-frequency interference (RFI) in a passive microwave radiometer, the threshold level is generally calculated from the mean value and standard deviation. However, a serious problem that can arise is an error in the retrieved brightness temperature from a higher threshold level owing to the presence of RFI. In this paper, we propose a method to detect and mitigate RFI contamination using the threshold level from statistical criteria based on a spectrogram technique. Mean and skewness spectrograms are created from a brightness temperature spectrogram by shifting the 2-D window to discriminate the form of the symmetric distribution as a natural thermal emission signal. From the remaining bins of the mean spectrogram eliminated by RFI-flagged bins in the skewness spectrogram for data captured at 0.1-s intervals, two distribution sides are identically created from the left side of the distribution by changing the standard position of the distribution. Simultaneously, kurtosis calculations from these bins for each symmetric distribution are repeatedly performed to determine the retrieved brightness temperature corresponding to the closest kurtosis value of three. The performance is evaluated using experimental data, and the error in the retrieved brightness temperature is observed to be less than approximately 3 K from a window with a size of 100 × 100 time-frequency bins according to the RFI levels and cases.

In reservoir operations rule curves, it is necessary to apply rule curves to guide long-term reservoir management. This paper proposes an approach to optimize the reservoir operation rule curves (RORC) using intelligent optimization techniques from the Firefly Algorithm (FA) and a unique combination method utilizing the Artificial Bees Colony and Cultural Algorithm (ABC-CA). The aim is to establish a connection with the simulation model to determine the optimal RORC for flood control. The proposed model was used to determine the Nam-Oon Reservoir (NOR) is optimal flood control RORC in Northeastern Thailand. The minimum frequency and a minimum average of ex-cess water were given as an objective function for assessing the efficiency of the search process. The evaluation of the effectiveness of flood control RORC involved expressing water scarcity and excess water situations in terms of frequency, magnitude, and duration using historical inflow data syn-thesized from 1000 events. The results demonstrate that when using the obtained RORC to simulate the NOR system for reducing flooding in long-term operations, situations of excess water were smaller than those using the current RORC. The results indicated that situations of excess water using the obtained RORC from the proposed model were smaller than those using the current RORC situations. In decreasing flood situations, the newly acquired RORC from the suggested FA and ABC-CA models performed better than the current RORC.

Cracking in a wide array of industrial components and structures pose a significant threat to their integrity. Detecting cracks using ultrasonic inspection techniques is a widespread activity for economic reasons but there are limitations to the techniques due to the morphology of cracks, such as fatigue cracks. In addition to detection there is a need to measure the size of the cracks which are often within the volume of the material. Ultrasonic techniques are well-suited to look inside the volume of the material but achieving sufficient sensitivity to the tip of the cracks in particular is practically difficult. Without an accurate knowledge of where the tip of the crack lies there can be significant uncertainty in sizing measurements. Machine Learning (ML) techniques are being developed to aid in the inspection and monitoring tasks but presenting the ultrasonic data in a suitable way for ML is very important. Following on from recent work presenting the development of the snooker algorithm to create images termed parameter-spaces, this paper presents how these images can be input into neural network based ML systems to automatically size these critical cracks.

Profiling technologies, such as proteomics, allow the simultaneous measurement and comparison of thousands of plant components without prior knowledge of their identity. The combination of these non-targeted methods facilitates a more comprehensive approach than targeted methods and thus provides additional opportunities to identify genotypic changes resulting from genetic modification, including new allergens or toxins. The purpose of this study was to investigate unintended changes in GM Bt maize grown in South Africa. In the present study, we used bi-dimensional gel electrophoresis based on fluorescence staining, coupled with mass spectrometry in order to compare the proteome of the field-grown transgenic hybrid (MON810) and its near-isogenic counterpart. Proteomic data showed that energy metabolism and redox homeostasis were unequally modulated in GM Bt and non-GM maize variety samples. In addition, a potential allergenic protein – pathogenesis related protein -1 has been identified in our sample set. These finding highlight the suitability of unbiased profiling approaches to complement current GMO risk assessment practices worldwide.

We study the influence of high-order twisting phases on polarization states and optical angular momentum of a vector light field with locally linear polarization and a hybrid state of polarization (SoP). The initial SoP of a twisted vector optical field (TVOF) modulated by the high-order twisting phase possesses various symmetric distributions. The propagating properties of a high-order TVOF with locally linear polarization and hybrid SoP are explored, including the intensity compression, expansion, and conversion between the linear and circular polarization components. In particular, orbital angular momentum (OAM) appears in a high-order TVOF during propagation where no OAM exists in the initial field. The variation of OAM distribution in cross-section becomes more frequent with the increase of the twisting phase order. In addition, a non-symmetric OAM distribution appears in an anisotropic TVOF, leading to the rotation of the beam around the propagation axis during propagation. These results provide a new approach for optical field manipulation in a high-order TVOF.

Objectives: The current study aimed to compare the adaptation of the restored class-I cavities with two self-etch adhesives bonded to two resin composite using cross-polarization optical coherence tomography (CP-OCT). Materials and Methods: Cylindrical class-I cavities were prepared on twenty, extracted human premolars. Two self-etch adhesives; Clearfil SE bond 2 (SE; Kuraray Noritake Dental, Japan) and Bond Force (Palfique Bond) adhesive (PL; Tokuyama Dental, Japan) were used in this study that were bonded to either resin composites materials; Herculite XRV microhybrid dental composite (HRV; Kerr, Italy) or Estelite Alpha composite (ESA; Tokuyama Dental, Japan). The specimens were divided into four groups (n=5); SE-HRV, SE-ESA, PL-HRV and PL-ESA. All specimens were varnished and stored in distilled water for 24h. Then, they were submerged in a contrasting medium. After that, all groups were optically imaged under CP-OCT at every 250 µm interval distance. Later, image binarization and gap quantification were carried out using Image analysis software. Result: There was a significant difference between all the groups except between SE-ESA and PL-ESA (p = 0.51). The highest median gap % was seen in PL-HRV group followed by SE-ESA, PL-ESA and SE-HRV. Conclusion: Other than composite filler loading and adhesive formula, the interactions of the adhesive and composite copolymers have great influence on composite adaptation.

Exercises for lower trapezius (LT) often use overhead positions, causing compressive forces to the subacromial space. Scapular retraction would be an alternative to activate LT muscle. Electromyography of infraspinatus (IS), upper (UT) and LT was recorded during scapular retraction under progressive adduction loads of 42 participants, divided in 2 groups: with (SP, n=26) and without shoulder pain (nSP, n=16). The adduction loads of 20, 30, 40 and 50% of the maximal voluntary contraction were applied using a load cell. Normalized electromyography and the ratio between UT and LT (UT:LT) were used for statistical analysis. No differences were observed between groups, but a condition effect occurred for all muscles: UT showed higher values at 50% vs. 20% (p=0.004); LT showed higher values on 40% and 50% (p=0.001; 0.006). Higher values for IS were noted at 40% (vs 20%; p=0.04), and at 50% (vs. 20%; p=0.001, vs. 30%, p=0.001; vs. 40%; p=0.001). UT:LT showed lower values at 50% (vs. 20%; p=0.001, and vs. 30%; p=0.016). Scapular retraction with adduction loads at 40-50% is an alternative to overhead exercises aiming to activate the LT and the IS muscles. The exercise ensures higher levels of LT and IS excitation, without increasing UT excitation.

: Digital communication is becoming an integral component of contemporary society and the use of mobile devices is increasing faster than ever. The function of message communication is becoming more popular as for mobile phone users, a short messaging service (SMS) requires an extremely high level of security. Any SMS that enters a person's smartphone must be considered a private affair, with privacy and security safeguarded. This research study found a novel Deoxyribonucleic acid (DNA) Cryptography method that uses a dynamic DNA sequence table to increase security. Cryptography is a popular approach for ensuring the confidentiality of a message. This paper proposed an Efficient Cryptographic Scheme for SMS (ECSS) algorithm to protect texts received from an Android smartphone. ECSS-based encryption has been identified as a novel method of securing information in the form of DNA molecules that employ DNA strands to conceal the information. This Paper provides the DNA cryptography approach for encrypting and decrypting plain texts in this work. The primary goal of ECSS cryptography is to guarantee secrecy when people transfer data across a network. This paper examines DNA Crypto, the distinction between classical cryptography and DNA Data encryption. An Android-based app is created to perform the proposed technique and the results show that the algorithms produce a consistent encryption result in which the length of the message before encryption is always the same as the length of the message after decryption. The suggested security solution has the potential to greatly improve the security of mobile communication. This Paper also provides experimental results for our chat application performance, such as received text message correctness, cipher text, average encryption time and average decryption time. According to the findings/results of this study, the speed of average encryption and decryption of the description is roughly 0.011 and 0.037 sec and prevents plaintext and dictionary attacks.

Anthracnose and root rot are major foliar and root diseases of strawberry, respectively that cause most yield and quality losses. Anthracnose is caused by multiple species belonging to Colletotrichum spp complex. This disease alone can causeup to 70% yield loss in North America. Colletotrichum spp. cause several disease symptoms on strawberries, including root, fruit, and crown rot, lesions on petioles and runners, and irregular black spots on the leaf. In many cases, a lower level of infection on foliage remains non-symptomatic (quiescent), posing a challenge to growers as these plants can be a significant source of inoculum for the fruiting field. Reliable detection methods for quiescent infection should play an important role in preventing infected plants' entry into the production system or guiding growers to take appropriate preventative measures to control the disease. The selection of highly effective fungicides and including them in a schedule to prevent the development of fungicide resistance in fungal populations will remain an area of continued research. Disease management methods should entail sensitive molecular testing of suspected fungal isolates for resistance, rotation of products, and monitoring of quiescent infections in transplant materials. Testing and the inclusion of non-chemical methods such as biologicals and biorational treatments especially for soilborne pathogens will also be necessary to make disease management economically feasible and sustainable.

Brain, the most complex object known in the universe, uses few watts of power. To mimic it a nuclear power plant will be required and this power house controls the human body, single handedly. Surprisingly, “On the left side, nothing is right and on the right side there is nothing left”. Typically, there are two lateral halves of the brain: Left hemisphere and right hemisphere working distinctly. Left hemisphere is inclined towards logic; Right hemisphere is the root cause of imagination added with critical thinking. In situations like the current pandemic, COVID-19, it is the right half which tends to dominate the processing. This gives birth to mental stress, anxiety thus, aggravating the existing medical condition. Considering this pattern, a survey was conducted in Durg district of Chhattisgarh, which is one of the most hard hit epicentre of the COVID-19 second wave in India. According to this survey, it was revealed that largely women of all age groups (10-25, 26-40, 40 above) were right brained i.e. dominance of right over left hemisphere. Being more imaginative and creative thinkers they are more likely to suffer from mental issues than males. The aim of this research is to improve the mental wellbeing of the citizens in such threatening conditions. To prevent this situation awareness is a must and some stress relieving games have also been created.

The pointing accuracy of large radio telescopes is affected by antenna structure errors, installation errors, servo errors, gravity, and varying environmental factors. It is hard to estimate the pointing error of radio telescopes under solar radiation via the traditional multi-parameter static pointing models, due to the time-varying characteristics of the dynamic pointing error. There is still no effective way to estimate the dynamic pointing error of large radio telescopes under solar radiation up to now. To estimate the dynamic pointing error of large radio telescopes under solar radiation, a new way based on digital twin(DT) is tried in this paper. The operational framework of the DT system of large radio telescopes is introduced first. Then, the Wuqing 70-m radio telescope(WRT70) is taken as the research object, the digital models of which are created. Finally, the reliability of the WRT70's DT system is verified and the dynamic pointing error of WRT70(staying at the position of the elevation angle of 90° and the azimuth angle of 180°) on two sunny days in different seasons is estimated by the created DT system. The research results show that the pointing error of large radio telescopes under solar radiation fluctuates greatly and the seasonal differences are very striking. The maximum elevation pointing error of WRT70 under solar radiation around the winter solstice is over 40 arcsec, which should never be ignored. The way is feasible to estimate the dynamic pointing error of large radio telescopes staying at a specific position under solar radiation via constructing a DT system in this paper, but it is not yet able to estimate effectively the dynamic pointing error of large radio telescopes being in action. It is expected to establish a dynamic pointing error model and calibrate the dynamic pointing errors of large radio telescopes being in action by DT technology in the future.

In order to monitor the diversity of terrestrial biomes, the Earth Exploration Satellite Services demand a high data rate for downlink transmissions while sharing their frequency spectrum with, and suffering interferences from, cellular Base Stations. Both highlight the dilemmas of spectral efficiency (bps/Hz) and spectral coexistence. Our research aims to mitigate interference on low orbit satellite downlinks using Cognitive Radio (CR) and Adaptive MODulation and CODing (MODCOD) techniques. To fulfill this: 1) we present CR approaches to enhance spectrum exploitation. Next, 2) we detail Adaptive MODCOD (ACM) technique to increase RF power and spectral efficiencies. Then, 3) we suggest the solution by combining 1) and 2). Afterwards, 4) we analyze it by monitoring the signal to interference plus noise ratio and the CR/MODCOD strategy. Finally, 5) we provide case studies to demonstrate the strategy’s effectiveness through the practical operation of satellite services, and 6) we conduct a bench test of the communication system.

The availability rating of any system is the probability that it will be able to operate for a given time in other words, to restore the system in the case of a system failure, or during the failure it is a measure of the availability index of resource system. We aimed to complete the study for the reasons as below. The rating and upgrading of underground mine radio communication system availability is to ensure operation reliability of the underground mine and to establish reliable radio communication system for miner’s safety during failure. Therefore, our study is contributed to reveal system availability rating of single resource (with two parallel connections) system and two resources (with three parallel connections) system. The study is related to not only practical contribution but also reliability engineering theory. To achieve this result, we have used Exponential, Weibull, and Poisson distributions. The readiness rating of single resource (with two parallel connections) and two resources (with three parallel connections) systems were calculated using Matlab software and the simulation results were introduced. This result confirms that any system has a resource system, which increases its readiness rating. The study was in examples of single resource radio communication system on the two shafts of the underground mine and two resource radio communication system for three shafts. During the initial system reliability enhancement study, the readiness of the dual resource system was assessed. The rating shows a 99 percent result, which is very meaningless for systems with more than two n-resources and we have revealed that it can show more than 100 percent result. In the process of the study on system reliability improvement the rating availability of system which has two resources was 99 % result. It is very meaningless for systems with more than two n-resources or more than 100% result.

The radio operation in wireless sensor networks (WSN) in the Internet of Things (IoT) applications are the most common source for power consumption. However, recognizing and controlling the factors affecting radio operation can be valuable for managing the node power consumption. ContikiMAC is a low-power Radio Duty-Cycle protocol in Contiki OS used in WakeUp mode, which is a clear channel assessment (CCA) to check radio status periodically. The time spent to check the radio is of utmost importance for monitoring power consumption. It can lead to false WakeUp or idle listening in Radio Duty-Cycles and ContikiMAC. This paper presents a detailed analysis of radio WakeUp time factors of ContikiMAC. Then, we propose lightweight CCA (LW-CCA) as an extension to ContikiMAC to reduce the percentage of Radio Duty-Cycles in false WakeUps and idle listenings by using dynamic received signal strength indicators (RSSI) status check time. The simulation results in the Cooja simulator show that LW-CCA reduces about 8% energy consumption in nodes while maintaining up to 99% of the packet delivery rate (PDR).

This paper shows the development of a simultaneous tri-band (S: 2.2 - 2.7 GHz, X: 7.5 - 9 GHz and Ka: 28 - 33 GHz) low-noise cryogenic receiver for geodetic Very Long Baseline Interferometry (geo-VLBI) which has been developed by the technical staff of Yebes Observatory (IGN) laboratories in Spain. The receiver was installed in the first radio telescope of the Red Atlántica de Estaciones Geodinámicas y Espaciales (RAEGE) project, which is located in Yebes Observatory, in the frame of the VLBI Global Observing System (VGOS). After this, the receiver was borrowed by the Norwegian Mapping Autorithy (NMA) for the commissioning of two VGOS radiotelescopes in Svalbard (Norway). A second identical receiver was built for the Ishioka VGOS station of the Geospatial Information Authority (GSI) of Japan, and a third one for the second RAEGE VGOS station, located in Santa María (Açores Archipelago, Portugal). The average receiver noise temperatures are 21, 23 and 25 Kelvin and the measured antenna efficiencies are 70%, 75% and 60% in S-band, X-band and Ka-band, respectively.

Background: Oral squamous cell carcinoma (OSCC), with poor prognosis and high mortality rates, is one of the most diagnosed head and neck cancers. Cancer stem cells (CSCs) - epithelial-to-mesenchymal transition (EMT) loop is increasingly implicated in the therapy-resistance, relapse, and metastasis of OSCC patients. Accumulating evidence indicate that aberrantly expressed CD47 is associated with cell-death evasion, invasion and cancer metastasis; however, the role of CD47 in the modulation of CSCs-like phenotypes, including therapy-resistance and metastasis, with its underlying mechanism in OSCC remains largely underexplored. Methods: This study investigated the CSCs- modulating potential of CD47 in OSCC cell lines SAS, TW2.6, HSC-3 and FaDu using bioinformatics approach, immunoblotting, immunofluorescence staining, migration, invasion, colony and orosphere formation, as well as radiosensitivity assays. Results: We demonstrated that the characteristic ectopic expression of CD47 in OSCC patients was associated with ~ 20% 2-year survival disadvantage (p = 0.01) and positively correlated with the expression of pluripotency factors; while shRNA silencing of CD47 significantly suppressed cell viability and markedly inhibited orosphere formation, resulting in smaller and fewer orospheres, and downregulated CD133, SOX2, OCT4 and c-Myc mRNA and protein expression levels. We also showed that CD47 downregulation attenuates EMT, migration and clonogenicity of OSCC cells, with associated E-cadherin upregulation and suppression of Vimentin, Slug, Snail, and N-cadherin expression. Conclusion: Of therapeutic relevance, combined with radiotherapy, CD47 knockdown enhanced the anti-OSCC effect of radiotherapy. Thus, we demonstrate the therapeutic feasibility of a CD47-mediated anti-CSCs strategy, and suggest a role for CD47 suppression in potentiating the therapeutic efficacy of radiation therapy in OSCC patients.

This paper presents a methodology to calculate day-ahead wind speed predictions based on historical measurements done by weather stations. The methodology was tested for three locations: Colombia, Ecuador, and Spain. The data is input into the process in two ways: 1) as a single time series containing all measurements, and 2) as twenty-four separate parallel sequences, corresponding to the values of wind speed at each of the 24 hours in the day over several months. The methodology relies on the use of three non-parametric techniques: Least-Squares Support Vector Machines, Empirical Mode Decomposition, and the Wavelet Transform. Also, the traditional and simple Auto-Regressive model is applied. The combination of the aforementioned techniques results in nine methods for performing wind prediction. Experiments using a MATLAB implementation showed that the Least-squares Support Vector Machine using data as a single time series outperformed the other combinations, obtaining the least mean square error.

The delivery of therapeutical molecules through the skin, particularly to its deeper layers is impaired due to the stratum corneum layer, which acts as barrier to foreign substances. Thus, for the past years, scientists have focused on the development of more efficient methods to deliver molecules to skin distinct layers. Microneedles, as a new class of biomedical devices, consists on an array of microscale needles. This particular biomedical device had been drawing attention due to their ability to breach the stratum corneum, forming micro-conduits to facilitate the passage of therapeutical molecules. The microneedle device has several advantages over conventional methods, such as better medication adherence, easiness and painless self-administration. Moreover, it is possible to deliver the molecules swiftly or over time. Microneedles can vary in shape, size and composition. The design process of a microneedle device must take in account several factors, like the location delivery, the material and manufacturing process. Microneedles have been used in a large number of fields from drug and vaccine application, cosmetics, therapy, diagnosis, tissue engineering, sample extraction, cancer research, wound healing, among others.

The smart management of water resources is an increasingly important topic in today's society. In this context, the paradigm of Smart Water Grids (SWGs) aims at a constant monitoring through a network of smart nodes deployed over the water distribution infrastructure. In such a way, a continuous assessment of water quality and state of health of the pipeline infrastructure can be achieved, allowing an early detection of leaks and water contamination. Acoustic wave-based technology has arisen as a viable communication technique among the nodes of the network. Such technology can be suitable to replace traditional wireless networks in SWGs, as the acoustic channel is intrinsically embedded in the water supply network. However, the fluid-filled pipe is one of the most challenging media to be employed for data communication. This paper aims at reviewing those works dealing with acoustic-based communication networks in real large-scale urban water supply networks. An overview on the characteristics, trends and design challenges of existing works is provided as a guideline for future research.

Community radios play a paramount role in the development of the community. Community radio stations have been highly engaged in addressing social, economic, cultural, educational, health, environmental, sanitation, and disaster issues effectively and strategically using local languages in context. Community radios are also used to express, and share indigenous views, thoughts, ideas, problems, and perspectives of local people. The purpose of this analysis is to explore the role of community radio for integrated and sustainable development in Ethiopia. It used a systematic narrative review. Nine research works and five assessments report were selected purposively and analyzed in a quantitative approach. Currently, in Ethiopia, there are 50 community radio stations that received broadcast licenses from Ethiopian Broadcast Authority with four types of licensing and broadcasting in 29 local languages. Community radio helps the community to identify their common goals, create holistic plans, monitor the progress of their developmental activities, and guide on sustainable development. It contributes to integrated and sustainable development in a collaborative and creative process that cultivates the social, economic, and political conditions needed for the community to succeed which aimed to improve and sustain the livelihoods of the community. However, the media can’t achieve its target goal to support the development activities and bring holistic development of the community. As a result; this review paper focuses on reviewing how Ethiopians use community radios for holistic development. And it suggested the way how we can use community radios for the prospective holistic development in Ethiopia.

Fatigue cracks in a wide array of industrial components and structures pose a significant threat to their integrity. Detecting fatigue cracks using ultrasonic inspection techniques is a widespread activity for economic reasons but there are limitations to the techniques due to the morphology of fatigue cracks. In addition to detection there is a need to measure the size of the cracks which are often within the volume of the material. Ultrasonic techniques are well-suited to look inside the volume of the material but achieving sufficient sensitivity to the tip of the cracks in particular is practically difficult. Without an accurate knowledge of where the tip of the crack lies there can be significant uncertainty in sizing measurements. Machine Learning (ML) techniques are being developed to aid in the inspection and monitoring tasks but presenting the ultrasonic data in a suitable way for machine learning is very important. This paper presents a new approach to condition the ultrasonic data for machine learning settings so that they can be used effectively and confidently to detect and size fatigue cracks. The new approach, using images termed parameter-spaces, will also aid in conventional inspections as they are able to give information to human operators as to the existence or not of these very dangerous cracks.

Seismic imaging is the main technology used for subsurface hydrocarbon prospection. It~provides an image of the subsurface using the same principles as ultrasound medical imaging. As for any data acquired through hydrophones (pressure sensors) and/or geophones (velocity/acceleration sensors), the raw seismic data are heavily contaminated with noise and unwanted reflections that need to be removed before further processing. Therefore, the noise attenuation is done at an early stage and often while acquiring the data. Quality control (QC) is mandatory to give confidence in the denoising process and to ensure that a costly data re-acquisition is not needed. QC is done manually by humans and comprises a major portion of the cost of a typical seismic processing project. It is therefore advantageous to automate this process to improve cost and efficiency. Here, we propose a supervised learning approach to build an automatic QC system. The~QC system is an attribute-based classifier that is trained to classify three types of filtering (mild = under filtering, noise remaining in the data; optimal = good filtering; harsh = over filtering, the signal is distorted). The attributes are computed from the data and represent geophysical and statistical measures of the quality of the filtering. The system is tested on a full-scale survey (9000 km²) to QC the results of the swell noise attenuation process in marine seismic data.

Seismic imaging is the main technology used for subsurface hydrocarbon prospection. It provides an image of the subsurface using the same principles as ultrasound medical imaging. It is based on emitting a sound (pressure) wave through the subsurface and recording the reflected echoes using hydrophones (pressure sensors) and/or geophones (velocity/acceleration sensors). Contrary to medical imaging, which is done in real time, subsurface seismic imaging is an offline process that involves a huge volume of data and needs considerable computing power. The raw seismic data are heavily contaminated with noise and unwanted reflections that need to be removed before further processing. Therefore, the noise attenuation is done at an early stage and often while acquiring the data. Quality control (QC) is mandatory to give confidence in the denoising process and to ensure that a costly data re-acquisition is not needed. QC is done manually by humans and comprises a major portion of the cost of a typical seismic processing project. It is therefore advantageous to automate this process to improve cost and efficiency. Here, we propose a supervised learning approach to build an automatic QC system. The QC system is an attribute-based classifier that is trained to classify three types of filtering (mild = underfiltering, noise remaining in the data; optimal = good filtering; harsh = overfiltering, the signal is distorted). The attributes are computed from the data and represent geophysical and statistical measures of the quality of the filtering. The system is tested on a full-scale survey (9000 km2) to QC the results of the swell noise attenuation process in marine seismic data. The results are encouraging and helped identify localized issues that were difficult for a human to spot.

Modern radio spectrometers make measurement of polarized intensity as a function of Faraday depth possible. I investigate the effect of depolarization along a model line of sight. I model sightlines with two components informed by observations: a diffuse interstellar medium with a lognormal electron density distribution and a narrow, denser component simulating a spiral arm or H~{\sc ii} region, all with synchrotron-emitting gas mixed in. I then calculate the polarized intensity from 300-1800 MHz and calculate the resulting Faraday depth spectrum. The idealized synthetic observations show far more Faraday complexity than is observed in Global Magneto-Ionic Medium Survey observations. In a model with a very nearby H~{\sc ii} region observed at low frequencies, most of the effects of a ``depolarization wall'' are evident: the H~{\sc ii} region depolarizes background emission and less (but not zero) information from beyond the H~{\sc ii} region reaches the observer. In other cases, the effects are not so clear, as significant amounts of information reach the observer even through significant depolarization, and it is not clear that low-frequency observations sample largely different volumes of the interstellar medium than high-frequency observations. The observed Faraday depth can be randomized such that it does not always have any correlation with the true Faraday depth.

: Background: The polysaccharides are one of the main active ingredients of Polygonum sibiricum (PSP), which is a traditional food and medicine homologues in China. The antidepressant-like effects of PSP and its underlying mechanisms remain to be studied in depth, especially the regulation of microglial polarization. Methods: The chemical composition and structural characteristics of PSP was determined firstly. The CUMS procedure was carried out to the zebrafish for 5 weeks and PSP were immersed administration for 9 days (1 h/d). The body weight of zebrafish was monitored and the behavioral tests, including the novel tank test and light and dark tank test, were performed to evaluate the antidepressant-like effects of PSP. Then the function of HPI axis, the levels of peripheral inflammation, neuronal and blood-brain barrier damage in mesencephalon and telencephalon and the mRNA expression of M1/M2 phenotype genes in brain were examined. Results: PSP samples had the typical structure characteristics of polysaccharide, consisting of glucose, mannose and galactose with the average Mw 20.48 kDa, which owned a porous and agglomerated morphology. Compared with untreated zebrafish, the depression-like behaviors of CUMS-induced zebrafish were significantly attenuated. PSP significantly decreased the levels of cortisol and the pro-inflammatory cytokines and increased the levels of the anti-inflammatory cytokines in the body of CUMS-induced depressive zebrafish. Furthermore, neuronal and blood-brain barrier damage in mesencephalon and telencephalon and the mRNA expression of M1/M2 phenotype genes in brain were remarkably reversed by PSP. Conclusion: These findings indicated that the antidepressant-like effects of PSP were related to alter the HPI axis hyperactivation, suppress peripheral inflammation, inhibit neuroinflammation induced by microglia hyperactivation, and modulate microglial M1/M2 polarization. The current study provides foundation to the future exploitation of PSP in the functional foods of emotional regulation.

The bionic polarization imaging navigation sensor (BPINS) is a navigation sensor that provides absolute heading, and it is of practical engineering significance to model the measurement error of BPINS. The existing BPINSs are still modeled using photodiode-based measurements rather than imaging measurements and are not modeled systematically enough. This paper proposes a measurement model of BPINS that takes into account the geometric and polarization errors of the optical system. Firstly, the key error factors affecting the measurement accuracy of BPINS are systematically investigated and the Stokes vector-based measurement error model of BPINS is established. Secondly, based on its measurement error model, the effect of the error source on the measurement performance of BPINS is quantitatively analyzed by using Rayleigh scattering to generate scattered sunlight as a known incident light source. The experimental results show that the coordinate deviation of the principal point has a greater impact, followed by grayscale response inconsistency of CMOS and integration angle error of micro-polarization array, and finally lens attenuation. This finding can guide the subsequent calibration of BPINS, and the quantitative results provide an important reference for its optimal design.

Visualization techniques are a powerful communication tool between construction stakeholders. The advancement of technology from 2D drawings to 3D models, Virtual Reality (VR), and Augmented Reality (AR) has emphasized the crucial role of efficient communication of ideas, designs, and concepts in preventing project delays and other issues in the Architecture, Engineering, and Construction (AEC) industry. Contemporary innovations such as web-based virtual reality cloud platforms that facilitate collaborative AEC projects and Head-mounted Displays that enable the viewing of VR environments are some of the latest technological developments that are emerging in the construction industry. These technological advances have the potential to improve communication, increase project efficiency, and enhance the quality of construction work. The purpose of this research is to identify existing trends and potential future directions by appropriating the state of the art of the intellectual growth of Virtual reality and Augmented Reality. The study used scientometric analysis in reviewing existing publications to scientifically map the evolution of VR and AR in the AEC sector. The study observed an emerging but little amount of publications on VR and AR in construction. While Africa contributes little significance, advancement in VR and AR research is led by United States and America. The study expresses concern over the dearth of research and the low amount of collaborations amongst institutions in diverse countries. The study concludes that VR and AR research in the AEC sector must be afforded the needed focus and attention. In recent times, the global Coronavirus pandemic has shown that technology such as VR and AR is inevitable in the success of a project.

The Tumor Microenviroment (TME) is a complex milieu that is increasingly recognized as a key factor in multiple stages of disease progression and responses to therapy as well as escape from immune surveillance. However, the precise contribution of specific immune effector and immune suppressor components of the TME in Burkitt lymphoma (BL) remains poorly understood. In this paper, we applied the computational algorithm CIBERSORT to Gene Expression Profile (GEP) datasets of 40 BL samples to draw a map of immune and stromal components of TME. Furthermore, by VECTRA multispectral immunofluorescence (IF) and multiple immunohistochemistry (IHC), we investigated the TME of an additional series of 40 BL cases and evaluated the possible role of the PD-1/PD-L1 immune checkpoint axis. Our results indicated that M2 polarized macrophages are the most prominent TME component in BL. In addition, we investigated the correlation between PD-L1 and latent membrane protein-2A (LMP2A) expression on tumour cells, highlighting a subgroup of BL cases characterized by a non- canonical latency program of EBV with an activated PD-L1 pathway. In conclusion, our study analysed the TME in BL and identified a tolerogenic immune signature highlighting new potential therapeutic targets.

The reliable online analysis of volatile compounds in exhaled breath remains a challenge as a plethora of molecules occur in different concentration ranges (i.e. ppt to %), and need to be detected against an extremely complex background matrix. While this complexity is commonly addressed by hyphenating a specific analytical technique with appropriate preconcentration and/or preseparation strategies prior to detection, we herein propose the combination of three analytical tools based on truly orthogonal measurement principles as an alternative solution: field-asymmetric ion mobility spectrometry (FAIMS), Fourier-transform infrared (FTIR) spectroscopy-based sensors utilizing substrate-integrated hollow waveguides (iHWG), and luminescence sensing (LS). These three tools have been integrated into a single compact analytical platform suitable for online exhaled breath analysis. The analytical performance of this prototype system was tested via artificial breath samples containing nitrogen (N2), oxygen (O2), carbon dioxide (CO2) and acetone as a model volatile organic compound (VOC) commonly present and detected in breath. Functionality of the combined system was demonstrated by detecting these analytes in their respectively breath-relevant concentration range and mutually independent of each other generating orthogonal yet correlated analytical signals. Finally, adaptation of the system towards the analysis of real breath samples during future studies is discussed.

The boundary layer height (BLH) distinguishes the interface between the lower and free atmosphere, which is a key variable in numerical simulation, aerosol, and environmental pollution studies. Thus, the goal of this work is to propose a novel method conjuncting with numerical regularization to analyze climate characteristics of the marine boundary layer height (MBLH) using 2007-2011 GPS-RO data from the COSMIC mission. While traditionally, the difference method has been used to achieve this aim, herein, we propose an innovative method, in which the bending angle profile gradient was calculated using the numerical regulation method where the regulation parameters are determined by the double-parameter model function method. Then, the MBLH was determined by employing the maximum gradient method to ascertain the height corresponding to the smallest gradient. The results show a correlation between currents and the MBLH—a relationship that has not been previously demonstrated. A low MBLH is associated with seasons and regions where cold ocean currents are prevailing; whereas a high MBLH is observed in the seasons and places where warm currents are prevailing. This correlation was validated by comparing the obtained results with different occultation data—i.e., atmprf and echprf—which also established that atmprf is more sensitive to convective cloud top capture. In seas with active convection, the armprf calculated bending angle is higher than that from echprf. Subsequently, the standard deviation was used to express the MBLH confidence level. The results show that the MBLH standard deviation is highest in low latitudes and lowest in the middle and high latitudes. Furthermore, we analyzed the interannual MBLH variation trend, which displayed a seasonal variation and spatial distribution corresponding with the current and subsolar point. Finally, we conducted a case study in the South China Sea, and identified a distinctive seasonal change and downward trend.

Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate, and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology that uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, using LoRaSim for different network scales. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 6% in DER, and a number of collisions 13 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 5%, 2.8%, and 2% of DER, and a number of collisions 11, 7.8 and 2.5 times smaller than equal-distribution, Tiurlikova's (SoTa), and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption similar to Tiurlikova's, and 2.8 times lower than the equal-distribution and random dynamic allocation policies. Furthermore, we approach the practical aspects of how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

Machine learning (ML) methodologies have been looked upon recently as a potential candidate for mitigating nonlinearity issues in optical communications. In this paper, we experimentally demonstrate a 40-Gb/s 256-quadrature amplitude modulation (QAM) signal-based Radio over Fiber (RoF) system for 50 km of standard single mode fiber length which utilizes support vector machine (SVM) decision method to indicate an effective nonlinearity mitigation. The influence of different impairments in the system is evaluated that includes the influences of Mach-Zehnder Modulator nonlinearities, in-phase and quadrature phase skew of the modulator. By utilizing SVM, the results demonstrated in terms of bit error rate and eye linearity suggest that impairments are significantly reduced and licit input signal power span of 5dBs is enlarged to 15 dBs.

Abstract Background Context Pelvic ring fractures are becoming more common in the aging population and can prove to be fatal, having mortality rates between 10% and 16%. Stabilization of these fractures is challenging and often require immediate internal fixation. Therefore, it is necessary to have a biomechanical understanding of the different fixation techniques for pelvic ring fractures. Methods A previously validated three-dimensional finite element model of the lumbar spine, pelvis, and femur was used for this study. A unilateral pelvic ring fracture was simulated by resecting the left side of the sacrum and pelvis. Five different fixation techniques were used to stabilize the fracture. A compressive follower load and pure moment was applied to compare different biomechanical parameters including range of motion (contralateral sacroiliac joint, L1-S1 segment, L5-S1 segment), and stresses (L5-S1 nucleus stresses, instrument stresses) between different fixation techniques. Results Transiliac -trans sacral screw fixation at S1 and S2 showed the highest stabilization for horizontal and vertical displacement at the sacral fracture site and reduction of contralateral sacroiliac joint for bending and flexion range of motion by 165% and 121%, respectively. DTSF (Double transiliac rod and screw fixation) model showed highest stabilization in horizontal displacement at the pubic rami fracture site, while the L5_PF_W_CC (L5-Ilium posterior screw fixation with cross connectors) and L5_PF_WO_CC ( L5-Ilium posterior screw fixation without cross connectors) showed higher rod stresses, reduced L1-S1 (approximately 28%), and L5-S1 (approximately 90%) range of motion. Conclusions Longer sacral screw fixations were superior in stabilizing sacral and contralateral sacroiliac joint range of motion. Lumbopelvic fixations displayed a higher degree of stabilization in the horizontal displacement compared to vertical displacement of pubic rami fracture, while also indicating the highest rod stresses. When determining the surgical approach for pelvic ring fractures, patient-specific factors should be accounted for to weigh the advantages and disadvantages for each technique.

Blood-brain-barrier is a major obstacle in treating brain-related disorders as it does not allow to deliver drugs in the brain. In order to facilitate delivery of drugs in brain, we developed a method for predicting blood-brain-barrier penetrating peptides. These blood-brain barriers penetrating peptides (B3PPs) can act as therapeutic as well as drug delivery agents. We trained, tested, and evaluated our models on blood-brain-barrier peptides obtained from the B3Pdb database. First, we compute a wide range of peptide features then we select relevant peptide features. Finally, we developed numerous machine learning-based models for predicting blood-brain-barrier peptides using selected features. Our model based on random forest performed best on the top 80 selected features and achieved a maximum 85.08% accuracy with 0.93 AUROC. We also developed a web server, B3pred that implements our best models. It has three major modules that allow users to; i) predict B3PPs, ii) scanning B3PPs in a protein sequence, and iii) designing B3PPs using analogs. Our web server and standalone software is freely available at https://webs.iiitd.edu.in/raghava/b3pred/.

Botnets, a prominent threat to IoT security. ‘botnet’ this word is the composition of robot and network. A network of robots used to commit cybercrime. A bot means a compromised end-host or a device which is a member of a botnet. [2] Governments have become a popular target for malicious attacks. This is due to them holding mass confidential data on their network.

This paper presents multidisciplinary and innovative research concerning fighting against coronavirus through wastewater collection and treatment. Studies suggest that coronavirus exists in the wastewaters. Untreated wastewater is proved to spread the virus. Coronavirus is attacking people globally and shrinking the economy. This paper highlights the idea that the coronavirus shall be defeated with the help of wastewater collection and treatment as well. The question addressed by this paper is will communities defeat the coronavirus without well-collected and treated wastewaters? This research aims to display the role of wastewaters in the spread of coronavirus in cities and to require their collection. The methods to achieve the goals are theoretical surveys, case study strategy, mathematical modeling, statistical procedures, forecasting of future, and dialectical discussions. The findings of this research demonstrate the need for carefully collected and treated wastewaters to overcome the coronavirus. This paper gives suitable techniques to collect and treat wastewater such as wastewater stabilization ponds, bacterial reactors, and anaerobic ponds. The innovative idea of this paper, its suggested indicators to select a certain wastewater treatment technique in every city, and its outcome will assist the global community to fight the coronavirus more effectively.

In this paper, a multi-operator differential evolution algorithm (MODE) is proposed to solve the Optimal Power Flow (OPF) problem and is called MODE-OPF. The MODE-OPF utilizes the strengths of more than one differential evolution (DE) operator in a single algorithmic framework. Additionally, an adaptive method (AM) is proposed to update the number of solutions evolved by each DE operator based on both the diversity of population and quality of solutions. This adaptive method has the ability to maintain diversity at the early stages of the optimization process and boost convergence at the later ones. The performance of the proposed MODE-OPF is tested by solving OPF problems for both small and large IEEE bus systems (i.e., IEEE-30 and IEEE-118) while considering the intermittent solar and wind power generation. To prove the suitability of this proposed algorithm, its performance has been compared against several state-of-the-art optimization algorithms, where MODE-OPF outperforms other algorithms in all experimental results and thereby improving a network's performance with lower cost. MODE-OPF decreases the total generation cost up to 24.08%, the real power loss up to 6.80% and the total generation cost with emission up to 8.56%.

Plasma being the fourth and most abundant form of matter extensively exists in the universe in the inter-galactic regions. It provides an electrically neutral medium of unbound negative and positive charged particles, which has been produced by subjecting air and various other gaseous mixtures to strengthen the electromagnetic field and by heating compressed air or inert gasses for creating negative and positive charged particles known as ions. Nowadays, many researchers are paying attention to the formation of artificial Plasma and its potential benefits for mankind. The literature is sparsely populated with the applications of Plasma. This paper presents specific methods of generation and applications of Plasma, which benefits humankind in various fields, such as in electrical, mechanical, chemical and medical fields. These applications include hydrogen production from alcohol, copper bonding, semiconductor processing, surface treatment, Plasma polymerization, coating, Plasma display panels, antenna beam forming, nanotechnology, Plasma Torch, Plasma pencils, low-current non-thermal Plasmatron, treatment of prostate cancer, Plasma source ion implantation, cutting by Plasma, Plasma etching, pollution control, neutralization of liquid radioactive waste, etc. Resultantly, worth of Plasma technology in the medical industry is increasing exponentially that is closing the gap between its benefits and cost of equipment used for generating and controlling it.

Bone is a dynamic tissue with the capacity of repair and regeneration in specific conditions. Nevertheless, due to the increased incidence of bone disorders, the need of bone grafts has been growing over the past decades and the development of an ideal bone graft with optimal properties remains a clinical challenge. This review addresses the bone properties (morphology, composition and their repair and regeneration capacity) and puts the main focus on the potential strategies for developing bone repair and regeneration materials. It describes the requirements for designing a suitable scaffold material, types of materials (polymers, ceramics and composites) and techniques to obtain the porous structures (additive manufacturing techniques/robocasting or derived from marine skeletons) for bone tissue engineering applications. The main objective of this review is to gather the knowledge on the materials and methods for the production of scaffolds for bone tissue engineering and highlighting the potential of natural porous structures such as marine skeletons as promising alternative bone graft substitute materials without any further mineralogical changes, or after partial or total transformation into calcium phosphate. The suitability of the marine-derived porous bone graft substitutes for the intended applications will be also discussed.

This paper explores the application of various machine learning techniques for predicting customer churn in the telecommunications sector. We utilized a publicly accessible dataset and implemented several models, including Artificial Neural Networks, Decision Trees, Support Vector Machines, Random Forests, Logistic Regression, and gradient boosting techniques (XGBoost, LightGBM, and CatBoost). To mitigate the challenges posed by imbalanced datasets, we adopted different data sampling strategies, namely SMOTE, SMOTE combined with Tomek Links, and SMOTE combined with Edited Nearest Neighbors. Moreover, hyperparameter tuning was employed to enhance model performance. Our evaluation employed standard metrics such as Precision, Recall, F1-Score, and the Receiver Operating Characteristic Area Under Curve (ROC AUC). Regarding the F1-Score metric, CatBoost demonstrates superior performance compared to other machine learning models, achieving an outstanding 93% following the application of Optuna hyperparameter optimization. In the context of the ROC AUC metric, both XGBoost and CatBoost exhibit exceptional performance, recording remarkable scores of 91%. This achievement for XGBoost is attained after implementing a combination of SMOTE with Tomek Links, while CatBoost reaches this level of performance after the application of Optuna hyperparameter optimization.

This research work focuses on the potential application of an organic compound, santalol obtained from santalum album in the inhibition of the enzyme tyrosinase which is actively involved in the biosynthesis of the melanin pigment. Over-production of melanin causes undesirable pigmentation in humans as well as other organisms that significantly downgrade their aesthetic value. The study is designed to explain the purification of tyrosinase from the mushroom Agaricus bisporus, followed by activity assay and enzyme kinetic to give insight into the santalol modulated tyrosinase inhibition in a dose dependent manner. The multi-spectroscopic techniques like UV-vis, fluorescence, and isothermal calorimetry are employed to deduce the efficiency of santalol as potential candidate against the tyrosinase enzyme activity. Experimental results are further verified by molecular docking. Santalol derived from the essential oils of santalum album, is widely used as remedy for skin disorders and potion for fair complexion since ancient times. Based on enzyme kinetics and biophysical characterization, this is the first scientific evidence where santalol inhibits tyrosinase, which may be employed in agriculture, food, and cosmetic industries by prevent excess melanin formation or browning.

Sperm capacitation involves biochemical and physiological changes that enable sperm to fertilize the oocyte. It can be induced in vitro under controlled conditions that simulate the environment of the oviduct. While extensively studied in mammals, its approach in lizards remains absent. Understanding the mechanisms that facilitate reproduction is essential for advancing the implementation of assisted reproductive technologies in this group. Fifteen males of Sceloporus torquatus were collected during the early stage of the reproductive season. The sperm were isolated from the seminal plasma and then diluted up to a volume of 150 μl using BWW medium to incubate with 5% CO2 at 30 °C for a maximum duration of 3 hours. A fraction was retrieved hourly for ongoing sperm assessment. We found that total motility is maintained up to 2 hours post-incubation, after which it decreased. However, sperm viability remained constant. From that moment on, we observed a transition to a deeper and less symmetrical flagellar bending in many spermatozoa. The chlortetracycline assay indicated a reduction in the percentage of sperm showing the F pattern and an increase in those exhibiting the capacitated (B) and reactive (RA) patterns, accompanied by an elevation in the percentage of damaged acrosomes as revealed by the lectin binding assay. In mammals, these changes are often associated with sperm capacitation. These observations support the notion that this process may also occur in saurian.

Leaf area estimation is a critical component in the study of plant growth and productivity within agricultural systems. This research introduces the LeafArea package, a specialized tool designed to calculate the leaf area of six distinct Andean fruit species: S. quitoense, S. betaceum, P. peruviana, R. fruticosus, P. ligularis and P. edulis. Leveraging response variables such as species type, leaf length and width, the package employs advanced machine learning algorithms to estimate leaf area accurately. The primary focus of the study is to identify the most effective model for describing the relationship between leaf width, length, and area for each plant species. Currently, the LeafArea package utilizes four different machine learning algorithms, namely generalized linear model (GLM), generalized linear mixed model (GLMM), Random Forest and XGBoost. Among these, XGBoost stands out as a top-performing algorithm, exhibiting exceptional predictive accuracy. The evaluation metrics employed in the program provide valuable insights for researchers, aiding in informed decision-making. Specifically, XGBoost demonstrates significantly lower prediction errors and approaches a near-perfect R2 value, emphasizing its potential to enhance predictive accuracy. These results underscore the efficacy of machine learning techniques, as a compelling choice for researchers seeking precise and robust predictions in leaf area estimation. The LeafArea package thus represents a valuable tool for advancing our understanding of plant growth dynamics, resource allocation, and overall productivity within agricultural ecosystems.

Nowadays, semantic segmentation is increasingly used in exploration by underwater robots, for example in autonomous navigation, so that the robot can recognise the nature and elements of its environment during the mission and act according to this classification to avoid collisions. Other applications can be found in the search for archaeological artefacts, in the inspection of underwater structures or in species monitoring. Therefore, it is necessary to try to improve the performance in these tasks as much as possible. To this end, we compare some methods for improving image quality and for data augmentation and test whether higher performance metrics can be achieved with both strategies. The experiments are performed with the SegNet implementations and the SUIM dataset with 8 common underwater classes to compare the obtained results with the already known ones. The results obtained with both strategies show that they are beneficial and lead to better performance results by achieving a mean IoU of 56% and an increased overall accuracy of 81.8%. The single result shows that there are 5 classes with an IoU value above 60% and only one class with an IoU value below 30%, which is a more reliable result and easier to use in real contexts.

The study aimed to manage and to analyse the results of the laboratory tests, routinally practice for hepatitis C diagnosis, using blood tests. Comparison of ELISA method results (Enzyme-Linked Immunosorbent Assay) and chemiluminescence methods results. Statistical analysis of this study results, was performed using the laboratory informatic system. The results of the study are substantial and intricate reffering to comparision between two methods concretlly ELISA method (Enzyme-Linked Immunosorbent Assay) and chemiluminescence methods and their results. For this purpose, the results of preliminary EСL screening method of patients at risk for HCV who took part in the study, are presented in specific tables. More than good to mention that the correlations of results were used in order to identify a possible relationships between indicators of ELISA method and ECL index. In addition, correlations antibodies detected in electrochemiluminescence, ECL and Enzyme-Linked Immunosorbent Assay ELISA are pointed out. EСL and ELISA method results, are relevant for screening and for diagnostic confirmation in HCV risk patients. Unfortunately in the present study, were impossible to conclude about false-negative results. Good to know our opinion that RT-PCR technique, it is considered proper for the diagnosis of HCV.

According to the wide variety of internet of things (IoT) devices within smart environments, many challenges face conventional digital forensic investigation (DFI) in smart environments. Challenges in this environment include heterogeneity, distribution, and massive amounts of data, which exceed digital forensic (DF) investigators’ human capabilities to deal with all of these challenges within a short period of time. Furthermore, it significantly slows down or even incapacitates the conventional DFI process. With the increasing frequency of digital crimes, better and more sophisticated DFI procedures are desperately needed, particularly in such environments. Since machine learning (ML) techniques might be a viable option in certain situations, this paper presents the integration of ML into DF. It also explores the potential further use of ML techniques in DF in smart environments to reduce the hard work of human beings, as well what to expect from future ML applications to the conventional DFI process.

One of the most popular techniques for determining electrical properties of material is the free-space measurement technique. With the potential for new applications requiring efficient, accurate and broadband material measurement systems using higher millimeter-wave and terahertz frequencies, the free-space measurement method has received renewed interest. This is mainly due to its simplicity, favorable properties as a non-destructive method, and it allows transmission and reflection measurements without any physical contact with the sample. This paper reviews and discusses state- of-the-art free space material measurement systems, starting with the different measurement techniques available for material characterization, their important concepts, post-processing in determining their properties, and progress towards expanding their use at higher frequencies. Also, this paper reviews dielectric material characterization using the free space method focusing on their application extension towards the higher frequencies. Besides, the algorithms for conversion methods and usage of lens in free space material measurement system was discussed in this paper. Finally, a future perspective on the outlook of this free space method is presented prior to the conclusion.

As indicated by standards of modern dentistry, the essence of endodontic treatment is chemo-mechanical disinfection of root canal system. The infected tooth should be eradicated of microorganisms and sealed tight with biocompatible materials. Vital element of this process is irrigation of canals with designated solutions as well as their activation. This review article summarizes various techniques of activation of irrigants for endodontic treatment and compares them. Results were gathered using PubMed and Google Scholar databases by searching keywords: irrigation, activation, sodium hypochlorite, irrigation protocols.