Acoustic energy dissipates in multi-phase or multi-boundary materials. Hybrid composites are described as multi-phase with many interfaces between their materials. The current research proposes studying the acoustic behavior of polymeric hybrid composites by estimating the time, velocity, and hybrid composite acoustic impedance. Two groups of hybrid composites were prepared, including unsaturated polyester with PMMA, except one with HDPE and the other with PS. Each group has 28, 35, and 40% weight fractions. An ultrasonic test measured time to determine velocity and acoustic impedance later. The results show that increasing the weight fraction will increase density with respect to the density of the reinforcing material. Different ultrasonic times were obtained with increasing weight fractions. As the weight fraction of PS increased, the time increased; unlike the velocity, it decreased but increased with density. In contrast, this behavior was changed if the hybrid had PE. The highest acoustic impedance was at 28% UP/PMMA+PS. In conclusion, UP/PMMA+PS can dissipate ultrasonic waves more than UP/PMMA+PE.

A real-time flight simulation tool is proposed using a Virtual Reality Head-Mounted Display (VR-HMD) for airships operating in beyond the line-of-sight (BLOS) conditions. Particularly, the VR-HMD is developed for stratospheric airships flying at low/high altitudes. The proposed flight simulation tool uses the corresponding aerodynamics characteristics of the airship, the buoyancy effect, mass balance, added mass, propulsion contributions and ground reactions in the FlightGear Fight Simulator (FGFS). The VR headset has been connected to the FGFS along with the radio controller containing the real-time orientation/state of each button that is also simulated to provide better situational awareness and a Head-Up Display (HUD) that has been developed to provide the required flight data. In this work, a system was developed to connect the FGFS and the VR-capable graphics engine, Unity, to a PC and a wireless VR-HMD in real-time with minimal lag between data transmission. A balance was found for FGFS to write to a CSV file at a period of 0.01s. For Unity, the file was read every frame which translates to around 0.0167s (60 Hz). A test procedure was also conducted with a similar rating technique based on the NASA TLX questionnaire that identifies the pilot’s spare mental capacity when completing an assigned task to assure the comfortability of the proposed VR-HMD. Accordingly, a comparison has been made for the aircraft control using the desktop simulator and the VR-HMD tool. Results, showed that the current iteration of the system is ideal to train pilots on using similar systems in a safe and immersive environment. Furthermore, such an advanced portable system may even increase the situational awareness of pilots and allow them to complete a sizeable portion of actual flight tests with the same data transmission procedures in simulation. The resulting VR-HMD flight simulator is also conceived to express the ground control station (GCS) concept and transmit flight information as well as the point of view (POV) visuals in real-time using the real environment broadcasted using an onboard camera.

Bacterial adhesion to the surface of the adhesive material is an important step in the formation of plaque and enamel demineralization. In order to correlate the material composition to the specific surface roughness of the resin and to the probable more favourable adhesion of bacteria, scanning electron microscopy, combined with focus ion bean micromachining, together with stylus profilometry analysis have been in vitro performed to reveal the structural nature of three orthodontic adhesive resins used for bracket bonding and, above all, to understand how compositional factors can influence specific pivotal properties such as material’s surface roughness and robustness. In particular, we speculated about the morphological features that determine an increase in the bacterial adhesion and we proposed focused ion beam technique as a valuable tool to compare the internal structures of the polymers and to determine the peculiar mechanical properties of the examined adhesive resins.

Impact characterization of linear resonant actuator (LRA) is studied experimentally by newly developed drop tester, which can control various experimental uncertainty such as rotational moment, air resistance, secondary impact and so on. The feasibility of this test apparatus was verified by comparison with free fall test. By utilizing a high-speed camera and measuring the vibrational displacement of spring material, the impact behavior was captured and the damping ratio of the system was defined. Based on the above processes, the finite element model was established and the experimental and analytical results were successfully correlated. Finally, the damage of the system from impact loading can be expected by developed model and as a result, this research can improve the impact reliability of LRA.

The main purpose of the work was to determine the powder composition and properties of iron-based sinters used as a matrix in metallic diamond tools. The FeCuSnNi sinters obtained from a mixture of commercial powders were used for research. The material was subjected to milling in a ball mill and sinter have been performed with the hot-pressing technique in a graphite mold. The physical and mechanical properties of the sinters were tested. The investigations of obtained sinters concerned density, porosity, hardness, oxygen content, static tensile test and analysis of microstructure. The static tensile test was carried out with the use of a universal testing machine UTS-100. The study of the microstructure of sinters was performed using the JSM-7100F scanning electron microscope. The sinters are characterized by a high coefficient of thermal expansion and good mechanical properties. The FeCuSnNi sinter revealed a complex phase structure. Spot chemical analysis revealed the presence of Fe solution, Cu solution and the presence of iron oxides oxides. Nickel atoms were present throughout the sinter volume. The obtained results indicate that the presented material can be used as a matrix of a diamond-metal composite in diamond tools for the processing of natural stones and building materials.

Red mud (RM), a bauxite residue, contains hazardous radioactive wastes and alkaline material and poses severe surface water and groundwater contamination risks, necessitating recycling. Pretreated RM can be used to make adsorbents for water treatment. However, its performance is affected by many factors, resulting in a nonlinear correlation and coupling relationship. This study aimed to identify the best formula for an RM adsorbent using a mathematical model that examines the relationship between 11 formulation types (e.g., pore-assisting agent, component modifier, and external binder) and nine properties (e.g., specific surface area, wetting angle, and Zeta potential, among others). This model was built using a back-propagation neural networks(BP) based on single-factor experimental data and orthogonal test data. The model trained and predicted the established network structure to obtain the optimal adsorbent formula. The RM particle adsorbents had a pH of 10.16, specific surface area(BET) of 48.92 m2·g−1, pore volume of 2.10 cm3·g−1, compressive strength(ST)) of 1.12 KPa, and 24-h immersion pulverization rate(η_m) of 3.72%. In the removal of total phosphorus in flotation tailings backwater, it exhibited a good adsorption capacity (Q)and total phosphorous removal rate(η) of 48.63 mg·g−1 and 95.13%, respectively.

Organizational skills are a set of cognitive abilities responsible for goal-directed behaviors. While they are moderately studied in clinical settings, the assessment of organizational skills in the general population remains under-studied. This paper presents the new Durand Organizational Skills Questionnaire (DOSQ), which was developed to examine the factors associated with organizational abilities in the general population. Exploratory factor analysis, validated by a confirmatory factor analysis, suggests eight factors: Work Organization, Communication Clarity, Punctuality, Goal-Oriented Behavior, Assiduity, Workspace Organization, Strategies, and Attentiveness. Three studies using samples from the general population provided evidence for the reliability and validity of the DOSQ’s scores. Overall, the results suggest that the DOSQ offers a valid approach to measuring organizational skills in the general population.

The experiments described in this research article were designed to test the effect of rare variants into genomic prediction in dairy cattle. Common polymorphisms are able to explain only a small proportion of the underlying genetic variation of complex phenotypes. Variants representing functional mutations with large effects on complex phenotypes are expected to be rare due to natural (humans) or artificial (livestock) selection pressure. Therefore, it is important to check whether the use of rare variants could increase the accuracy of ranking of animals by providing the tool for more precise differentiation among the bulls with high additive genetic merit. The goal of our study was to verify whether including rare variants in a genomic selection model allows for a more accurate description of the additive genetic background of traits under selection in dairy cattle. We used the linear mixed model for comparison SNP estimates for Holstein-Friesian cattle of the two data sets – a set containing only single nucleotide polymorphisms defined by minor allele frequency ≥ 0.01, which is routinely used in the Polish genomic evaluation system (46,216 SNPs), and a set containing SNPs selected based only on the call rate (54,378 SNPs). Based on the SNP estimates we also calculated DGV and GEBV and compared them between both data sets. In all the analyses we used production, fertility, conformation and udder health traits. We also assessed the time required for the two most computationally demanding components of genomic selection: preparing genotype data, and estimation of SNP effects between those two data sets. The results of our study indicated that the analysis including rare variants resulted in changes in the individual ranking of the top 100 male and female candidates, but had no effect on the outcome of the quality of EBV prediction as expressed by the Interbull validation test.

Axial compression tests were carried out on 6 square steel tube confined concrete short columns and 6 BFRP square pipe confined concrete axial compression tests. The concrete strength grades were C30, C40, and C50. The test results show that the failure modes of steel pipe and BFRP pipe are obviously different, and the BFRP pipe undergoes brittle failure. Compared with the short columns of concrete confined by BFRP pipes, the ultimate bearing capacity of axial compression is increased by -76.46%, -76.01%, and -73.06%, and the ultimate displacements are -79.20%, -80.78%, -71.71%.

Axial compression tests were carried out on 6 square steel tube confined concrete short columns and 6 BFRP square pipe confined concrete axial compression tests. The concrete strength grades were C30, C40, and C50. The test results show that the failure modes of steel pipe and BFRP pipe are obviously different, and the BFRP pipe undergoes brittle failure. Compared with the short columns of concrete confined by BFRP pipes, the ultimate bearing capacity of axial compression is increased by -76.46%, -76.01%, and -73.06%, and the ultimate displacements are -79.20%, -80.78%, -71.71%.

The determination of the non-loading condition of the rail cable shifting (RCS) system, which consists of main cables, hangers and rail cables, is the premise of the girder erection for the long-span suspension bridges. An analytical form-finding analysis model of shifting system is established according to the basic assumptions of flexible cable structures. Herein, the rail cable is discretized into segmental linear cable elements and the main cable is discretized into segmental catenary elements. Moreover, the calculation and analysis equation of each member and their iterative solutions are derived by taking the elastic elongation of the sling into account. In addition, by taking the girder construction of Aizhai suspension bridge as engineering background, a global scale model of the RCS system is designed and manufactured; also the test system and working conditions are established. The comparison between the test results and analytical results shows the presented analytical method is correct and effective. The process is simplified in the analytical method, and the computational results and precision can satisfy the practical engineering requirements. In addition, the proposed method is suitable to apply to the computation analysis of similar structures.

Immense challenges arise in the Quality Assurance area due to contemporary development in Internet of Things (IoT) technology. Current issues are mainly related to test coverage, test diversity, IoT Stability, Use of Cellular Networks in IoTs, IoT Devices updates, Security, Data Integration, and interoperability. In this paper, we present all those issues with suggestions for tackling those issues.

In the context of evaluating physical function in individuals with stroke, the 3-meter backward walk test (3MBWT) emerges as a potential tool of interest. The purpose of this study was to assess the test-retest reliability and construct validity of the 3MBWT and its correlation with falling incidents. Conducted in a neurological rehabilitation center, 35 ambulatory individuals with stroke were enrolled within a month post-stroke onset. These participants, with a Functional Ambulation Category score of ≥4, underwent the 3MBWT, Functional Gait Assessment (FGA), 10-Meter Walk Test (10MWT), and 6-Minute Walk Test (6MWT) three times by different physiotherapists. Results indicated the 3MBWT displayed high reliability (r=0.97-0.98) and showed significant construct validity with other established walking tests like the 6MWT (r=-0.78) and 10MWT (r=0.71), with a moderate correlation to the FGA (r=-0.54). No marked differences in test outcomes were observed between participants based on their fall history. Conclusively, the 3MBWT proves to be highly reliable and validates well with existing walking function assessments for stroke patients, suggesting its potential as a time-efficient alternative.

Global differences in changes in the numbers of population-adjusted daily test-positive cases (NPDP) and deaths (NPDD) by COVID-19 were analyzed for 49 countries, including developed and developing countries. The changes as a proportion of national population were compared, adjusting by the beginning of test-positive cases increase (BPI) or deaths increase (BDI). Remarkable regional differences of more than 100 fold in NPDP and NPDD were observed. The trajectories of NPDD after BDI increased exponentially within 20 days in most countries. Machine learning analysis suggested that NPDD on 30 days after BDI was the highest in developed Western countries (1180 persons per hundred million), followed by countries in the Middle East (128), Latin America (97), and Asia (7). Furthermore, in Western countries with positive rates of the PCR test of less than 7.0%, the increase in NPDP was slowing-down two weeks after BPI, and subsequent NPDD was only 15% compared with those with higher positive rates, which suggested that the situation of testing might have affected the velocity of COVID-19 spread. The causes behind remarkable differences between regions possibly include genetic factors of inhabitants because distributions of the race and of the observed infection increasing rates were in good agreement globally.

The change in the value of the breaking energy is discussed here for selected steel grades used in building structures after subjecting the samples made of them to episodes of heating in the steady-state heating regime and then cooling in a simulated fire conditions. These changes were recorded based on the instrumented Charpy impact tests, in relation to the material initial state. The S355J2+N, 1H18N9T steels and also X2CrNiMoN22-5-3 duplex steel were selected for detailed analysis. The fire conditions were modelled experimentally by heating the samples and then keeping them for a specified time at a constant temperature of: 600°C (first series) and 800°C (second series), respectively. Two alternative cooling variants were investigated in the experiment: slow cooling of the samples in the furnace, simulating the natural fire progress, without any external extinguishing action, and cooling them in water mist simulating an extinguishing action by a fire brigade. The temperature of the tested samples was set at the level -20oC and alternatively at the level + 20oC. The conducted analysis is aimed at assessing the risk of sudden, catastrophic fracture of load-bearing structure made of steel degraded as a result of a fire previously occurred with different development scenarios.

This article introduces simulations of theoretical material with controlled properties for the evaluation of the effect of key parameters, as volumetric fractions, elastic properties of each phase and transition zone on the effective dynamic elastic modulus (Ed). The accuracy level of classical homogenization models was checked regarding the prediction of Ed. Numerical simulations were performed with finite element method (FEM) for evaluations of the natural frequencies and their correlation with Ed, through frequency equations. An acoustic test validated the numerical results and obtained the elastic modulus of concretes and mortars at 0.3, 0.5 and 0.7 water-cement ratios (w/c). Hirsch calibrated according to the numerical simulation (x = 0.27) exhibited a realistic behavior for concretes of w/c = 0.3 and 0.5, with 5% error. Nevertheless, for w/c = 0.7, Ed approached Reuss model, similarly to theoretical triphasic materials. Hashin-Shtrikman bounds is not perfectly applied to theoretical biphasic materials under dynamic situations.

Multi-cancer early detection (MCED) tests are being developed, but little is known about patient receptivity to their use for cancer screening. The current study assessed patient interest in such testing. Our team conducted a prospective, observational study among primary care patients in a large, urban health system. They were asked to complete a telephone survey that briefly described a new blood test in development to identify multiple types of cancer, but was not currently recommended or covered by insurance. The survey included items to assess respondent background characteristics, perceptions about MCED testing, and interest in having such an MCED test. We also used multivariable analyses to identify factors associated with patient interest in test use. In 2023, we surveyed 159 (32%) of 500 identified patients. Among respondents, 125 (79%) reported a high level of interest in having an MCED test. Interest was not associated with personal background characteristics, but was positively associated with the following expectations: testing would be recommended for cancer screening, be convenient, and be effective in finding early-stage disease (OR=11.70, 95% CI: 4.02, 34.04, p < 0.001). Research is needed to assess patient interest and actual uptake when detailed information on testing is presented in routine care.

It could be helpful if behaviours presented in routine handling could be used as temperament indicators, thus directing tailor-made managements, optimising resources, and animal welfare. We evaluate whether behaviours presented by 25 foals during the first navel treatment and first halter session at weaning. Their behaviour was assessed during a novel object transposition test when they were one year of age. Behavioural parameters presented then were correlated with behaviours presented at navel treatment and haltering. Foals that showed higher exploratory activity during the test correlated to foals that showed less reactivity and less tickling at navel treatment and that were more relaxed and showed less reactivity haltering. Confidence to transpose the novel object was correlated with foals that were more relaxed, showed less reactivity and were less ticklish at navel treatment and were more relaxed during haltering. Transposition style correlated foals less prone to transpose with foals less curious in humans at navel treatment and more vigilant at haltering. Correlations verified between routine management and behaviour test indicate the possibility of early identification of equine temperament, allowing management techniques and specific training for the individual, enhancing training efficiency, animal welfare, and better human-horse interactions.

The fixed stroke fatigue test can not simulate the real load condition of the landing gear, and the variable stroke fatigue test has increasingly become the mainstream. A modular test device for fatigue test for aircraft landing gears was designed, the automatic control of the buffer stroke was realized with ectopic displacement control technology effectively, the horizontal loading cylinder could follow the wheel axis actively with the displacement active control technology, follow-up loading along the vertical direction was realized through constructing a polar coordinate system and making the load line automatic alignment, a split-type dummy wheel was designed to improve the loading accuracy, a booster cylinder was designed to realize the control loading of high pressure combined with the hydraulic control system. The test shows that the technical scheme meets the design requirements, and the fatigue test was completed successfully. The device for landing gear variable stroke fatigue testing can be applied to other landing gear static / fatigue tests.

Graphically-rich applications such as games are ubiquitous with attractive visual effects of Graphical User Interface (GUI) that offers a bridge between software applications and end-users. However, various types of graphical glitches may arise from such GUI complexity and have become one of the main component of software compatibility issues. Our study on bug reports from game development teams in NetEase Inc. indicates that graphical glitches frequently occur during the GUI rendering and severely degrade the quality of graphically-rich applications such as video games. Existing automated testing techniques for such applications focus mainly on generating various GUI test sequences and check whether the test sequences can cause crashes. These techniques require constant human attention to captures non-crashing bugs such as bugs causing graphical glitches. In this paper, we present the first step in automating the test oracle for detecting non-crashing bugs in graphically-rich applications. Specifically, we propose GLIB based on a code-based data augmentation technique to detect game GUI glitches. We perform an evaluation of GLIB on 20 real-world game apps (with bug reports available) and the result shows that GLIB can achieve 100\% precision and 99.5\% recall in detecting non-crashing bugs such as game GUI glitches. Practical application of GLIB on another 14 real-world games (without bug reports) further demonstrates that GLIB can effectively uncover GUI glitches, with 48 of 53 bugs reported by GLIB having been confirmed and fixed so far.

Colorectal cancer (CRC) is one of the leading cancer-related causes of death in the world. Since the 70s, many countries have adopted different CRC screening programs which has resulted in a decrease in mortality. However, current screening test options still present downsides. The commercialized stool-based tests present high false-positive rates and low sensitivity, which negatively affects the detection of early stage carcinogenesis. The gold standard colonoscopy has low uptake due to its invasiveness and the perception of discomfort and embarrassment that the procedure may bring.In this review, we collected and described the latest data about alternative CRC screening techniques that can overcome these disadvantages. Web of Science and PubMed were employed as search engines for studies reporting on CRC screening tests and future perspectives. The searches generated 555 articles, of which 93 titles were selected. Finally, a total of 50 studies, describing 14 different CRC alternative tests, were included. Among the investigated techniques the main feature that could have an impact on CRC screening perception and uptake was the ease of sample collection. Urine, exhaled breath and blood-based tests promise to achieve good diagnostic performance (sensitivity of 63-100%, 90-95%, 47-97%, respectively) while minimizing stress and discomfort for the patient.

Fired bricks have shown tremendous potential as a construction material due to their properties. However, their use required some specifications in terms of quality, resistance, and durability. In developing countries, the lack of tools to make test specimens leads to many defects in these brick specimens responsible for low durability and weak precision during mechanical tests and shrinkage. In this study, a simple and traditional method of making test bricks is presented. This simple method allows the production of bricks with the required properties. This method is especially efficient for a firm or semi-soft pastes consistency. The handmade pastes do not stick into the walls of the mold like the case of steel molds and it gives specimens with standard shape, smooth surface, and sharp edges. The resulting fired bricks exhibit high mechanical strength comparable and even better than those of conventional methods.

This study aimed to evaluate the diagnostic roles of various immunohistochemical markers in urothelial carcinoma in situ (uCIS) through a meta-analysis and review of diagnostic test accuracy. Immunohistochemical markers CK20, CD44, AMACR, and p53 were evaluated in the present study. We analyzed the expression rates of immunohistochemical markers and compared their diagnostic accuracies. The estimated expression rates were 0.803 (95% confidence interval [CI]: 0.726–0.862), 0.142 (95% CI: 0.033–0.449), 0.824 (95% CI: 0.720–0.895), and 0.600 (95% CI: 0.510–0.683) for CK20, CD44, AMACR, and p53, respectively. In the comparison between uCIS and reactive/normal urothelium, the expression of CK20, AMACR, and p53 in uCIS was significantly higher than in reactive/normal urothelium. CD44 showed significantly lower expression in uCIS than in the reactive/normal urothelium. Among the markers, AMACR had the highest sensitivity, specificity, and diagnostic odds ratio. The AUC on SROC was the highest for CK20. In conclusion, immunohistochemical markers, such as CK20, CD44, AMACR, and p53, can be useful in differentiating uCIS from reactive/normal urothelium.

Neuropsychiatric disorders are globally public-health concern, in which diagnosis might be based on symptoms that often vary across individuals. Schizophrenia is one of the major neuropsychiatric disorders, which may affect millions worldwide. Detection of predictive biomarkers is the most intensively developing approach for the disease. However, the biochemical alterations have not been comprehensively distinguished up to the present time. In addition, there is less confidence of finding a specific biomarker for neuropsychiatric disorders including schizophrenia, but rather a specific characteristic behavioral pattern. Maternal immune activation has been considered to be one of the important factors for the development of neuropsychiatric disorders. Here, the mouse model of neuropsychiatric disorders has been built, in which poly-I:C, sodium dextran sulfate (DSS) and κ-carrageenan (CGN) were used for the maternal immune activation during the pregnancy of individuals. Subsequently, we challenged to link some of biochemical changes of p62 and GLAST in the offspring mice brain to the alteration of several pathological behaviors. Consequently, it has been shown that autophagy might be involved in the development of neuropsychiatric disorders including schizophrenia. To our knowledge, this is the first report of the significant correlation between pathological behavior and the biochemical alterations in neuropsychiatric disorder model animals. The relative ease of conducting these evaluation-tasks would make them useful for testing novel therapeutics designed to ameliorate the symptoms of several psychiatric disorders.

Stray current is a relevant phenomenon in particular for DC electrified transportation systems, affecting the track and infrastructure within the right of way and other structures and installations nearby. It worsens with time and the level of protection depend on timely maintenance, besides correct design choices. The assessment of track insulation is the starting point for both stray current monitoring systems and at commissioning or upon major changes. Standardized methods (ref. EN 50122-2, or IEC 62128-2) are almost unchanged in the last 20 years, but suffer from accuracy issues and variability due to parameters and conditions not under operator’s control. A critical discussion and analysis of the sources of variability and practical constraints is proposed, followed by the evaluation of uncertainty, with the objective not only to assess the accuracy of provided results, but to foster research on innovative, more flexible and accurate, methods.

In this paper we study a special kind of finite mixture model. The sample drawn from the model consisits of three parts. The first two parts are drawn from specified distributions f1 and f2, while the third one is drawn from the mixture. A problem of interest is whether the two distributions f1 and f2 are the same. To test this hypothesis, we first define the regular location and scale family of distributions and assume that f1 and f2 are regular denisty functions. Then the hypothesis transforms to the equalities of the location and scale parameters, respectively. To utilize the information in the sample, we use Bayes’ theorem to obtain the posterior distribution and give the sampling method. Then we propose the posterior p-value to test the hypothesis. The simulation studies show that our posterior p-value largely improves the power in both normal and logistic cases while nicely controls the Type-I error. A real halibut dataset is used to illustrate the validity of our method.

COVID-19 pandemic will continue to pose a major public health threat until vaccination-mediated herd immunity is achieved. Most projections predict vaccine will reach a large subset of the population late in 2021 or early 2022. In the meantime, countries are exploring options to remove strict lockdown measures and allow for society and the economy to return to normal function. One possibility is to expand on existing COVID-19 testing strategies by including large-scale rapid point of care diagnostic tests (POCTs). Currently, there is significant variability in performance and features of available POCTs, making selection and procurement of appropriate test for specific use case difficult. In this review, we have used the World Health Organization’s (WHO) recently published Target Product Profiles (TPPs) for specific use cases of COVID-19 diagnostic tests to screen for top-performing POCTs on the market. Several top-performing POCTs, based on clinical sensitivity/specificity, the limit of detection, and time to results, that meet WHO TPP criteria for direct detection of SARS-CoV-2 (acute infection), or indirect diagnosis of past infection (host antibodies) are highlighted here.

Prestrained at 5% and 15% duplex stainless steel UNS S32750 specimens have been subjected to electropulsing treatments with current density of 100 A/mm2 and 200 A/mm2 and 100 and 500 pulses for each current density value. Corrosion tests, X-ray diffraction, microhardness and residual stresses were collected before and after the electropulsing treatments. Tensile tests were performed after the electropulsing treatments in order to compare the mechanical response to the reference tensile tests performed before the pulsing treatments. Increase in fracture strain was observed after the pulsing treatment in comparison to the reference tensile tests. A decrease in microhardness was also observed after the electropulsing treatments for both degrees of prestrain. Electropulsing treatment almost eliminates the work-hardened state in the 5% prestrained specimens while partially recovered the 15% prestrained material increasing both uniform and fracture strain. The bulk temperature of the samples remained the same for all the duration of the treatments. The effect are to be addressed to a combined effect of the increase in atomic flux due to the electrical current and local joule heating in correspondence of crystal defects. Electropulsing treatment applied to metallic alloys is a promising technique to reduce the work hardening state without the need of annealing treatments in a dedicated furnace.

This study delves into the atmospheric corrosion behavior of chromium-free complex-phase steel (CP), specifically investigating the influence of wet/dry frequency and ratio in cyclic corrosion tests (CCT). The study employs a modified ISO 14993 standard CCT method, which involves salt spray, dry, and wet stages. After 15 and 30 CCT cycles, mass loss, maximum corrosion depth, and corrosion products were analyzed to gain insights into corrosion mechanisms. In general, increasing the frequency and wet/dry stage ratio in CCT extends the time for autocatalytic reactions to occur, leading to accelerated localized CP corrosion and increased pitting factors. However, as the rust layer thickens, uniform corrosion may also intensify, so careful considerations are necessary. This study underscores the importance of controlling the frequency and ratio of wet/dry stages in CCT for effectively analyzing localized corrosion behavior in specimens.

To analyze the viral titers of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and respiratory syncytial virus (RSV) at the anterior nasal site (ANS) and nasopharyngeal site (NS), evaluate their virological dynamics, and validate the usefulness of a newly developed two antigen-detecting rapid antigen diagnostic test (Ag-RDT) that simultaneously detects SARS-CoV-2 and RSV using clinical specimens. This study included 195 asymptomatic to severely ill patients. Overall, 668 specimens were collected simultaneously from the ANS and NS. The cycle threshold (Ct) values calculated from real-time polymerase chain reaction were used to analyze temporal changes in viral load and evaluate the sensitivity and specificity of the Ag-RDT. The mean Ct values for SARS-CoV-2-positive, ANS, and NS specimens were 28.8, 28.9, and 28.7, respectively. The mean Ct values for RSV-positive, ANS, and NS specimens were 28.7, 28.8, and 28.6, respectively. SARS-CoV-2 and RSV showed the same trend in viral load, although the viral load of NS was higher than that of ANS. The sensitivity and specificity of the newly developed Ag-RDT were excellent in specimens collected up to 10 days after the onset of SARS-CoV-2 infection and up to 6 days after the onset of RSV infection.

In this paper, the research progress on dynamic behaviors of RC structural members is reviewed from experimental, theoretical and numerical perspectives. Firstly, the basic overview, measurement methods, main conclusions and current limitations of available dynamic loading tests are presented. Then the theoretical studies on the dynamic constitutive models of RC materials, the dynamic increase factor (DIF) model for concrete and reinforcing steel and the proposed modified models of dynamic behavior parameter at the structural member level are summarized. Finally, the available modelling approach and the method for incorporating the dynamic effect in numerical simulation of RC structures are reviewed. Moreover, a brief introduction is made to the dynamic hysteretic model established on the experimental data, which provides an alternative approach to consider the dynamic effect beside the commonly used DIF method. This paper provides valuable reference for experimental studies and numerical simulations on the dynamic behaviors of RC structures, and also puts forward some issues that need to be solved in the future research works..

Poplar is a globalized commercial tree species that supports humanity's economy, energy, and ecology. To evaluate the twelve hybrid Populus euramericana genotypes developed in China, a total of six locations were selected for the test, comprising four climatic types and three soil kinds. The objective of this study is to characterize the early stages of Populus euramericana growth and test locations; to identify good genotypes for stable and high yield that may be encouraged; and to offer practical experience and technical assistance for further breeding of Populus euramericana. Main research methods include the statistical description of tree heights and diameter at breast heights[DBH], the establishment of a mixed effect model to analyze the genotype and environmental interaction effect [G×E], the use of best linear unbiased prediction[BLUP] values as GGE biplots to achieve visual screening, and the calculation of genetic parameters. Results show that the genotype effect [G], the environmental effect [E], and the G×E is significant; the BLUP value has a strong correspondence with the observed value; the goodness of fit of all biplots can explain more than 85% of the variation; broad-sense heritability of tree height and DBH is 0.13 and 0.3, type-B correlation is 0.36 and 0.65; G5, G7, G4 and G9 are excellent genotypes with high yield and stability; using these four genotypes tree height and DBH can get 3.35% and 0.81% genetic gains.The study concludes as follows: Rank-change interaction and scale-effect interaction were distinctly occurred. The G, E, and G×E all had a significant effect on the growth of poplar trees during their early stage. G4, G5, G7, and G9 genotypes have favorable development characteristics. N146 is a great source of paternal genetics.

Microvascular self-healing composite materials have significant potential for application and their mechanical properties need in-depth investigation. In this paper, tensile and compressive properties of woven fabric carbon fiber reinforced polymers (CFRP) laminates containing three-dimensional microvascular channels were investigated experimentally. Several detailed finite element (FE) models were established to simulate the mechanical behavior of the laminate and the effectiveness of different models were examined. The damage propagation process of the microvascular laminates and the influence of microvascular parameters were studied by the validated models. The results show that microvascular channels arranged along the thickness direction (z-direction) of the laminates are critical locations under the loads. The channels have minimal effect on the stiffness of the laminates but causing a certain reduction in strength, which varies approximately linearly with the z-direction channel diameter within its common design range of 0.1~1mm. It is necessary to consider the resin-rich region formed around microvascular channels in the warp and weft fiber yarns of the woven fabric composite when establishing the FE model. And the layers in model should be assigned with equivalent unidirectional ply material in order to calculate the mechanical properties of laminates correctly.

Within the field of guilt and shame, two competing perspectives have been advanced. The first, the social-adaptive perspective, proposes that guilt is an inherently adaptive emotion and shame is an inherently maladaptive emotion; thus, those interested in moral character development and psychopathology should work to increase an individual’s guilt-proneness and decrease an individual’s shame-proneness. The functionalist perspective, in contrast, argues that both guilt and shame can serve a person adaptively or maladaptively—depending on the situational appropriateness, duration, intensity, and so forth. This paper reviews the research conducted supporting both positions, critiques some issues with the most widely used guilt- and shame-proneness measure in the social-adaptive research (the TOSCA), and discusses the differences in results found when assessing guilt and shame at the state versus trait level. The conclusion drawn is that although there is broad support for the functionalist perspective across a wide variety of state and trait guilt/shame studies, the functionalist perspective does not yet have the wealth of data supporting it that has been generated by the social-adaptive perspective using the TOSCA. Thus, before a dominant perspective can be identified, researchers need to (1) do more research assessing how the social-adaptive perspective compares to the functionalist perspective at the state level, and (2) do more trait research within the functionalist perspective to compare functionalist guilt- and shame-proneness measures with the TOSCA.

In this study, based on frost formation data provided by Harbin Meteorological Bureau, combined with geographical factors, temperature and population density, linear fitting, Mann-Kendall mutation test, pettitt method and sliding T test were used to analyze the spatio-temporal variation characteristics of frost date in Harbin Municipality and the effects of geographical factors, temperature and population density on frost regularity. The results showed that (1) The earliest year of FSD appeared was 1966 and 1967, on the 255th, i.e., August 18th, and the latest was 283 days, i.e., October 10th, 2006. The earliest year in which the FED appeared was April 24th of 2015, the 114th day of that year, and the latest was April 21st of 1974, the 141st day of that year. The year with the most frost was 2012, with 161 days, and the year with the shortest was 1966, with 123 days. (2) Throughout the study period, FSD increased by 7.8 days at a rate of -1.27d/10a, FED increased by 10.9 days at a rate of 1.77d/10a, and FFS increased by 18.9 days at a rate of 3.05d/10a. The tendency rate of FSD and FFS at each site in Harbin showed an increasing trend. For FED, the tendency rate of some sites showed an increasing trend. In general, FSD showed a delayed trend, FED showed an advanced trend, and FFS showed a prolonged trend. Using the method of unary linear regression, FSD of each site showed an increasing trend, FFS showed an increasing trend, and FED showed a decreasing trend in general. (3) Throughout the study period, FSD was mutated in 2000, and the arrival time of it in the study area averaged the 265th, i.e., September 22nd, and after that, the arrival time of it changed to the 272nd, i.e., September 29th of that year. FED was mutated in 2006, and the arrival time of it in the study area averaged 128th, i.e., April 8th. After the mutation, the arrival time of FED changed to 121st, i.e., April 1st of that year. FFS was mutated in 2004. Before the mutation, with an average arrival time of 137days in the study area .But after that, the time changed to 150 days.(4) FSD and FFS in Harbin Municipality were negatively correlated with latitude and positively correlated with temperature, while FED was positively correlated with latitude and negatively correlated with temperature. The FSD, FED and FFS in the central part of Harbin Municipality were the earliest, the latest and the longest, respectively, so the Pearson correlation coefficient method and the influence of longitude could not be reflected in the multiple regression. Several factors were judged by grey correlation analysis method. The longitude is significantly related to FSD, FED and FFS.

In this study, the focus is on the drop test simulation of an MR (Magnetorheological) damper-based main landing gear (MRMLG), aiming to explore multi-degree-of-freedom (DOF) dynamic models during aircraft landing. Three different 6-DOF dynamic models are proposed in this work and their drop performances are compared with results achieved one of commercial softwares. The proposed models include a nonlinear aircraft model (NLAM), a linearized approximated aircraft model (LAAM) linearizing from the nonlinear equations of motion in NLAM, and a fully approximated aircraft model (FAAM) which linearizes the MRMLG's strut force model. In order to evaluate drop performance of the aircraft landing gear system with MR dampers, a 7-DOF aircraft model incorporating the nonlinear MRMLG is formulated using RecurDyn. The principal comparative param-eters are the coefficient of determination (R2) for system response of each model with Re-curDyn model and root mean square error (RMSE) which is the ensembles of CG dis-placement data for each model. In addition, the ensemble of time series data is created for diverse drop scenarios, providing valuable insights into the performance of the proposed drop test models of the aircraft landing gear system featuring MR dampers.

The stability of twenty seven composts and organic substrates (including raw, less stable and stable materials) was assessed using two different liquid phase tests were carried out. One of the tests was introduced in 1998 and was based on the calculation of a Specific Oxygen Uptake Rate (SOUR). The newly introduced liquid phase test presented here is simpler to set-up and to perform that the older liquid phase test. It is based on the quantification of oxygen consumption in the headspace of a BOD bottle that contains the liquid-solid solution. The results indicate that a marginal correlation does exist between the main indices calculated from both tests. The correlation was stronger for the indices calculated for stable-processed organics than for the raw (unprocessed materials). The SOUR ranged from 1520 to 3650mg O₂/kg VS-h for the raw materials and from 110 to 1150 mg O₂/kg VS-h for the processed materials, respectively. The corresponding stability rate related index (LSRI₂₄) of the new liquid phase test introduced here ranged from 240 to 1180 mg O₂/dry kg-h for the raw materials and from 64 to 792 mg O₂/dry kg-h for the processed ones.

Functionally graded materials (FGM) have attracted considerable attention in the field of composite materials and rekindled interest in research on composite materials, due to their unique mechanical response achieved through material design and optimization. Compared to conventional composites, FGMs offer several advantages and exceptional properties, including improved deformation resistance, improved toughness, lightness properties, and excellent recoverability. This study focused on the production of functionally graded (FG) polymer materials by additive manufacturing (AM) method. FG structures were produced by the Fused Deposition Modeling (FDM) method using Acrylonitrile benzidine styrene (ABS) and Polylactic acid (PLA) materials and tensile tests were performed according to ASTM D638. The effects of different layer thicknesses, volume ratios, and total thicknesses on mechanical behavior were investigated. In addition, tensile tests were carried out by producing single-layer samples at certain volume ratios to create a numerical model with the Finite element method to verify the experimental data. As a result of this study, it is presented that the FG structure produced with FDM improves mechanical behavior.

To study the anti-cracking performance of cast-in-place concrete inner shaft lining structure under the combined effects of temperature and constraint, this paper first developed a novel temperature stress test machine suitable for the shape of the inner shaft lining structure and with adjustable endpoint constraint, providing specialized experimental equipment for subsequent cast-in-place concrete inner shaft lining temperature stress simulation experiments. Then, this paper preliminarily studied the temperature, strain, and stress changes of the cast-in-place inner shaft lining under the condition of 100% endpoint constraint by simulating the internal hydration heating and cooling process of the cast-in-place inner shaft lining and using the temperature stress test machine to accurately control the endpoint constraint conditions of the inner shaft lining scaled model.

Autonomic dysfunction is an increasingly recognised complication in chronic neurological conditions such as Parkinson’s disease , and other medical conditions, including diabetes mellitus, chronic fatigue syndrome, postural tachycardia syndrome with and without Ehlers-Danlos syndrome, fibromyalgia and recently Long Covid. Despite laboratory-based tests to evaluate normal and abnormal autonomic function, there are no home-based tests to record neuro-cardiovascular autonomic responses to common stimuli in daily life that are dependent on the normal functioning of the autonomic nervous system. We have developed an adapted blood pressure/heart Autonomic Profile (aAP) that can be used by an individual independently and repeatedly in a domiciliary setting to determine the physiological and symptomatic response to standing, food, and physical and mental (cognitive, emotional) activities. The aAP aids separating autonomic failure (often irreversible) from autonomic dysfunction. This helps the individual and attending healthcare professional understand the relationship between symptoms and common triggers in daily life and informs on self-management in debilitating conditions such as the postural tachycardia syndrome (PoTS) and Long Covid.

Seepage erosion is one of the main reasons for the local collapse or instability of embankments. To investigate the characteristics and mechanism of seepage erosion for cohesionless soils, the model tests by using an independently developed seepage erosion device and the numerical simulations based on the Discrete Element Method-Computational Fluid Dynamics (DEM-CFD) coupling model were carried out. The results show that the seepage erosion process of the cohesionless soil can be characterized by four stages: stable seepage stage, fine particles upward migration stage, sand samples boiling stage, and erosion damage stage. The skeleton structure of soil sample under seepage flow is continually changed due to the loss of fine soil particles, which results in a significant decrease in the sample strength and may ultimately lead to the failure of the sample. The results of this study can provide references and bases for the design, construction, and long-term service of embankments or earth dams under the complex seepage condition, reducing the risk of seepage erosion.

Climate change is a phenomenon that makes the climate system of a given region to be more unpredictable and increases the risk of water-related problems. GCMs under the new CMIP6 framework holds several climate models with many improvements as compared to past similar efforts. The improvements are mainly in the number of scenarios formulated, setup, parametrization, and resolution. In this study, 10 downscaled climate models from CMIP6 are evaluated by applying statistical and data mining tools and are ranked based on their capability to describe the historical observed series. The result of the analysis showed that the outputs of the MPI-ESM1-2-HR model have a good overall ranking among those 10 models. The output of this top-ranked model is used to understand future climate over UASB after properly bias-corrected using the QM method. Results of the bias correction step show that average annual precipitation has shown an increment of 6.5\% in the middle (SSP2-4.5) and 10.3\% in the worst (SSP5-8.5) case scenarios for the mid-century (2040 - 2069). Similarly, for the end of the century (2070 - 2099) an increment of 4.7\% and 17.5\% was predicted for the two scenarios respectively. Whereas average annual maximum temperature series showed an increment of 1.5 $\degree C$ for middle and 2.6 $\degree C$ for the worst case in the mid-century. At the same time, an increment of 2.2 $\degree C$ and 3.5 $\degree C$ were predicted for the end of the century similarly for those scenarios. Furthermore, it was predicted that the average annual minimum temperature series will have an increment of 2.6 $\degree C$ and 3.1 $\degree C$ for mid-century and 3.1 $\degree C$ and 4.7 $\degree C$ for the end century for the two scenarios respectively. An increase in precipitation with increased land degradation problems in the sub-basin increases the risk of flood events in the future.

Particle size can pose a challenge to random embankment compaction control methods, where practical techniques have hardly been developed and procedural control is used instead. In order to develop new quality control procedures for slate random fill, the necessary fieldwork and laboratory tests were carried out. This involved the revision of certain methods such as the wheel-tracking or topographic settlement tests. More than six hundred in-situ density and moisture content measurements were carried out for this research. In addition, more three hundred topographic settlements and three hundred wheel-tracking carriage tests were performed. The quality control processes were completed with more than thirty plate bearing tests. Possible evidence of statistical correlations between compaction control tests were identified. An analysis of variance (ANOVA) was performed. When testing proved relationships between them, the replacement of one of them by the other was assessed by deduction. Finally, the study suggests new procedures for compaction quality control of random slate fill used in crown area.

Evaluation of the usefulness of [18F]FDG-PET/CT in the short-term follow-up of patients admitted for COVID-19 pneumonia and to explore the association of findings with clinical prognostic markers. Prospective study included 20 patients admitted to hospital with COVID-19 pneumonia between November 2020 and March 2021. Clinical and laboratory test findings were gathered at admission, 48-72h post-admission, and 2-3 months post-discharge. [18F]FDG-PET/CT and respiratory function tests were performed at 2-3 months post-discharge. Lung volumes (TLC), spirometry (FVC, FEV1), lung diffusion capacity for carbon monoxide (DLCO), and respiratory muscle strength were measured. PET/CT images were qualitatively and semi-quantitatively interpreted. Volumetric [18F]FDG-PET/CT results were correlated with laboratory test and respiratory parameters. Eleven [18F]FDG-PET/CT (55%) were positive. The main finding was hypermetabolic lymphade-nopathy in the mediastinum (90.9%). SUVpeak of the target mediastinum lesion was correlated with neutrophil and lymphocyte counts. Eleven (55%) patients had impaired respiratory function, most frequently a reduced DLCO (35%). SUVpeak was positively correlated with %predict-ed-DLCO values. Pulmonary TLG was negatively correlated with %predicted-DLCO and TLC values. In the short-term follow-up of patients hospitalized for COVID-19 pneumonia, [18F]FDG-PET/CT findings revealed significant detectable inflammation in lungs and mediastinal lymph nodes that correlated with pulmonary function impairment in more than half of the patients.

Bridge load testing is crucial in evaluating bridge load-carrying capacity and construction quality. However, conventional techniques have many limitations such as the need for direct contact and low acquisition frequency. This study provides a comprehensive examination of the static and dynamic load tests of a multi-span cable-stayed bridge utilizing a ground-based radar inter-ferometer (GB-radar). The case study was conducted at the Fifth Nanjing Yangtze River Bridge (FNYRB), which is recognized as the world's first lightweight steel-concrete composite cable-stayed bridge, with two spans measuring 600 m. To enhance measurement accuracy, a method was proposed to detect and recover radar phase jumps caused by vehicle motion. Furthermore, precise geometry projection was employed to acquire vertical displacements from GB-radar which were taken along the line-of-sight (LOS) direction. Moreover, during the static load test, a continuous deformation was observed with a maximum pace of 0.31 mm/min, indicating a post-construction settlement caused by soft soil consolidation. This case study highlights the high sampling frequency, high measurement accuracy, and exceptional weatherproof ability of GB-radar, thereby demonstrating its potential to be an alternative to the structural health monitoring (SHM) system.

The aim of this work is to assess the influence of Friction Stir Welding (FSW), process parameters, optimized tool traveling speed, and corrosion resistance of the 0.95 Mg-Al-alloy and pure copper weldment. Samples of aluminum-copper with and without deformation were characterized to investigate the metallurgical effects created during the welding deformation process. Effect of process parameters on microstructure and corrosion rate have been investigated for all the samples. All the electrochemical and polarization tests were done in 3.5 wt.% NaCl solution. Scanning Kelvin Probe (SKP) was done to detect the localized corrosion on the surface. Optical micrography observation indicated that the primary α-Al phase, which was formed during solidification can effectively limit the growth of Cu₉Al₄ phase. Finer acicular α-Al precipitates were observed in CuAl matrix during joining process that tends to coarser with the increase in tools travel speed. The electrochemical and polarization results showed that among all the tool travelling speed the specimen joined at tool travelling speed of 40 mm/min shows the best non-corrosive property.

The intelligent morphing wing structure has the characteristics of flexibility, large deformation and adaptive change, which are different from those of the conventional wing. The motion law of the variable-camber leading edge is analysed by the numerical simulation method based on kinematics theory to solve the problem of verifying the motion function and structural strength of the variable camber wing. The driving deformation and aerodynamic load simulation of the variable camber leading edge are realised by designing a follow-up load test apparatus. Based on the numerical simulation of the mechanical boundary, the motion trajectory of the upper and lower wing loading points was predicted, and a multi-point cooperative control system was developed. Multi-sensor iteration was used to ensure the loading accuracy of the test control. The test results show that the average error of the deflection angle is 4.59% in the variable camber leading edge motion test. In the variable camber leading edge strength test, the average error of applied load magnitude and direction is 0.54% and 0.24%, respectively.

A sufficient amount of tissue sample is required to perform next-generation sequencing (NGS) with a high success rate, but the majority of patients with advanced non-small-cell lung cancer (NSCLC) are diagnosed with small biopsy specimens. Biopsy samples were collected from 184 patients with bronchoscopically diagnosed NSCLC. The tissue surface area, tumor cell count, and tumor content rate of each biopsy sample were evaluated. The impact of the cut-off criteria for the tissue surface area (≥ 1 mm2) and tumor content rate (≥ 30%) on the success rate of Oncomine Dx Target Test (ODxTT) was evaluated. The mean tissue surface area of the transbronchial biopsies was 1.23 ± 0.85 mm2 when small endobronchial ultrasonography with a guide sheath (EBUS-GS) was used, 2.16 ± 1.49 mm2 with large EBUS-GS, and 1.81 ± 0.75 mm2 with endobronchial biopsy (EBB). The proportion of samples with a tissue surface area of ≥ 1 mm2 was 48.8% for small EBUS-GS, 79.2% for large EBUS-GS, and 78.6% for EBB. Sixty-nine patients underwent ODxTT. The success rate of DNA sequencing was 84.1% and that of RNA sequencing was 92.7% over all patients. The success rate of DNA (RNA) sequencing was 57.1% (71.4%) for small EBUS-GS (n = 14), 93.4% (96.9%) for large EBUS-GS (n = 32), 62.5% (100%) for EBB (n = 8), and 100% (100%) for endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) (n = 15). Regardless of the device used, a tissue surface area of ≥ 1 mm2 is adequate for samples to be tested with NGS.

The metrological performance of FBG strain sensing systems is a critical premise for the precision of plastics water support pipeline structural deformation measurement, but the strain transfer loss of FBG attached on the plastics pipe subjected by dynamic force is unclear. This paper presents the first study on the effects of strain transfer between FBG, and acrylate polymer blended with poly resin (ABR)pipe sheets loaded by static and dynamic force. Theoretical methods of dynamic strain transfer theory combine with the exponentially decaying sinusoidal shock force time course is deduced and various dynamic parameters sensitivities studies are carried out, as well as that of the geometric parameters. The result of the dynamic theory is compared with the calibration test outcomes, while the ASTR of FBG attached on ABR sheet is compared with distributed optical fiber sensors (DOFS) and other pipe materials such as PVC, concrete, and steel. Results show that the ASTR of FBG is more accurate than that of the DOFS, and the grows of ASTR depending on the paste length of FBG, the Young's modulus of the middle materials, the thickness of the middle materials and attenuation coefficient. Paste length produced the largest increase, yet the magnitude and loading speed of the external force has unexpectedly little effect on ASTR. FBG seem low error, insensitive with dynamic force and independent with the material of matrix, and this demonstrates benefits that are stronger across the board than DOFS. This is not currently recognized by standards or by most reported studies.

With Direct Laser Writing (DLW) maturing in all aspects as a manufacturing technology a toolset for quality assurance must be developed. In this work we want to introduce a first of its kind test artifact. Test artifacts are standardized 3D models with specific geometric feature to evaluate the performance of writing parameters. Test artifacts are already common in other 3D additive manufacturing technologies e.g. Selective Laser Melting. The test artifact introduced in this work was developed in particular to accommodate 1) the high geometrical resolution of DLW structures and 2) the limited possibilities to examine the resulting structure. Geometric accuracy, surface adhesion as well as confocal raman spectroscopy results were considered when evaluating the design of the test artifact. We will explain the individual features and design considerations of our DLW test artifact. The difference between two slicers, Cura and 3DPoli, and the implications on measured feature sizes and the general shape is quantified. The measured geometries are used to derive a general design guide for a specific combination of photoresist, laser power and scanning speed and to analyse the geometric accuracy of a structure produced using these guidelines.

Among the different steps in software development software testing is one of the inevitable steps. Manual testing is considered to be more expensive and time-consuming, and this led to the formation of automated testing tools. Automated software testing tools offer a comprehensive system testing solution that minimizes the risk of any errors that could result in financial losses. One such tool is selenium. Selenium testing is an advantageous method employed by developers and testers to assess their code. Selenium is compatible with numerous widelyused programming languages like C#, Java, Python, and more. This paper focuses on understanding the in and outs of software testing using selenium

At the beginning of 2023 the Italian former prime minister, the former health minister and 17 others including the current president of Lombardy region, were placed under investigation on suspicion of aggravated culpable epidemic in connection with the government’s response at the start of the COVID-19 pandemic. The charges revolve around the failure by authorities to take adequate measures to prevent the spread of the virus in the Bergamo area, which experienced a significant excess of deaths during the initial outbreak. The aim of this paper is to analyse pandemic data of Italy and Lombardy region in the first 10 days of the pandemic, spanning from the 24th of February 2020 to the 4th of March 2020. The objective is to determine whether the use early warning indicators could have facilitated the identification of a critical increase in infections. This identification, in turn, would have enabled the timely formulation of strategies for pandemic containment, thereby reducing the number of deaths. In conclusion, to translate our findings into practical guidelines, we propose a low-cost early warning method for infectious respiratory diseases with asymptomatic carriers.

The Trail Making Test (TMT) is one of the most commonly administered tests in clinical and research neuropsychological settings. The two parts of the test [part A (TMT-A) and part B (TMT-B)] enable the evaluation of visuoperceptual tracking and processing speed (TMT-A), as well as divided attention, set-shifting and cognitive flexibility (TMT-B). The main cognitive processes that are assessed using TMT, i.e. processing speed, divided attention and cognitive flexibility, are often affected in patients with stroke. Considering the wide use of TMT in research and clinical settings since its introduction in neuropsychological practice, the purpose of our review was to provide a comprehensive overview on the use of TMT in stroke patients in an attempt to mainly identify its role for the evaluation of post-stroke cognitive dysfunction and progression over time, the identification of the underlying neuroanatomical pathology related to impaired TMT performance, and the association with other stroke outcomes, such motor function, driving ability and quality of life. Our comprehensive review underscores that the TMT stands as an invaluable asset in the stroke assessment toolkit, contributing nuanced insights into diverse cognitive, functional, and emotional dimensions. As research progresses, continued exploration of the TMT potential across these domains is encouraged, fostering a deeper comprehension of post-stroke dynamics, and enhancing patient-centered care across hospitals, rehabilitation centers, research institutions, and community health settings. Its integration into both research and clinical practice reaffirms TMT status as an indispensable instrument in stroke-related evaluations, enabling holistic insights that extend beyond traditional neurological assessments.

Background: Human papillomavirus is a common pathogen that infects the skin and mucosal epithelium, is transmitted sexually; causes condylomas or squamous cell carcinomas. Two (16 and 18) of the 150 HPV serotypes are oncogenic types. Studies have been done on the infection by oncogenic human papillomavirus 16/18 and associated factors are found to be very limited in Ethiopia. Objective: This study aimed to assess the prevalence of oncogenic human papillomavirus infection (HPV 16/18) and associated factors among women. Methods: An institutional-based cross-sectional study was conducted among 337 women screened for cervical cancer in two hospitals in East Gojjam Zone from February to April 2021 G.C. Four BSc-qualified nurses who worked in the chosen hospitals collected the data using pretested questionnaire and an HPV test (OncoE6TM Cervical Test) specific to HPV16/18 in cervical swabs. Descriptive analysis was performed to determine the prevalence and a multivariate logistic regression model was used to identify the associated factors of HPV16/18 infection. Finally, statistical significance was declared at P < 0.05.Results: The prevalence of HPV infection was 14.2% (95% CI: 10.7% -18.1%). The mean age of the respondents was 36.7±9.1 years. Women with the age group of 55-65 years (AOR = 7.91, 95% CI: 1.95-32.09), early initiation of sexual intercourse (AOR = 5.36, 95% CI: 1.58-18.13), history of sexually transmitted infection (STI) (AOR = 3.52, 95% CI: 1.27-9.72), human immunodeficiency virus (HIV) positive status (AOR = 6.8, 95% CI: 1.99-23.54), and number of lifetime sexual partners (AOR = 4.37, 95% CI: 1.15-17.3) were important independent factors associated with the presence of oncogenic HPV infection. Conclusion and Recommendation: We found a relatively low prevalence of high-risk HPV infection. Age, early initiation of sexual intercourse at less than 18 years, STI of women, being HIV seropositive, and a number of sexual partners were important factors for high-risk HPV infection. Women aged > 46 years, women with early initiation of sex, a history of STI, being HIV positive, and a history of multiple sexual partners should be encouraged to be screened and vaccinated for HPV infection. Wider-ranging studies are also needed in HPV-infected women in association with the cervical lesion.

Diagnosing cervical foraminal stenosis with intermittent arm radiculopathy is chal-lenging due to discrepancies between MRI findings and symptoms. This can be attributed to the fact that MRI images are often obtained in a relaxed supine position. This study aims to evaluate the feasibility of the Dynamic MRI Compression System (DMRICS) and to assess possible changes in cervical foramina, with both quantitative measurements and qualitative grading systems, with MRI during a simulated Spurling test. Ten patients (5 women and 5 men, ages 29-45) with previously confirmed cervical foraminal stenosis underwent MRI scans using DMRICS. MRIs were acquired in both relaxed and provoked states. A radiologist assessed 30 foramina (C4-C7) on the symptomatic side in both patient positions. Quantitative and qualitative measures were performed including the Numeric Rating Scale (NRS) and the Park and Kim grading systems. The provoked state induced concordant neck and arm pain in 9 of 10 patients. Significant shifts in Park and Kim fo-raminal gradings were noted: 13 of 27 Park gradings and 9 of 27 Kim gradings escalated post-provocation. No quantitative changes were observed. This pilot study indicates that the DMRICS device has potential to improve diagnostic accuracy for cervical radicu-lopathy, demonstrating induced cervical foraminal changes during a simulated Spurling test while performing MRI.

To address the challenges of climate change and food security, the establishment of smart farm complexes is necessary. While there have been numerous studies on the productivity and environmental control of individual greenhouses, research on greenhouse complexes is considerably limited. Conducting environmental studies during the design phase of these complexes poses financial constraints and practical limitations in terms of on-site experiments. To identify potential issues that may arise when developing large-scale greenhouse complexes, it is possible to utilize modeling techniques using Computational Fluid Dynamics (CFD) to assess environmental concerns and location issues before constructing the facilities. Consequently, simulating large-scale CFD models that incorporate multiple greenhouses and atmospheric conditions simultaneously presents significant numerical challenges. The objective of this study was to develop a guideline for verifying CFD models for a large-scale Venlo greenhouse, where acquiring field data before construction is not feasible for designing a greenhouse complex. The verification processes of the CFD models were conducted using 2D and 3D iterative simulations of a 2-hectare greenhouse model, using the improved Grid Independence Test (GIT) and wall Y+ approaches. Subsequently, the aerodynamic characteristics were analyzed in a 3D greenhouse model to access its performance when the wind direction was 90° in summer season. The findings revealed that a grid resolution of 0.8 meters and a first layer height of 0.04 meters were suitable for developing large-scale greenhouse models, resulting in a low Root Mean Square Error (RMSE) of 3.9% and a high coefficient of determination (R2) of 0.968. This process led to a significant reduction of 38% in the number of grid cells. These results will serve as design standards for large-scale greenhouses.

We have previously reported that a single test measuring oVEMP n10 to 4000Hz stimuli (either bone-conducted vibration (BCV) or air-conducted sound (ACS)) provides a definitive diagnosis of semicircular canal dehiscence (SCD) in 22 CT-verified patients with a sensitivity of 1.0 and specificity of 1.0. Such a single short screening test has great advantages of speed, minimizing testing time and the exposure of patients to stimulation. However some studies of the 4000Hz test for SCD have reported sensitivity and sensitivity values somewhat less that what we reported.

To detect aberrant human behaviors from large volume of passive data collected by smartphones in real time, we propose an online anomaly detection method using Hotelling’s T-squared test. The test statistic is a weighted average, with more weight on the between-individual component when there are little data available for the individual and more weight on the within-individual component when the data are adequate. The algorithm takes only O(1) run time in each update and the required memory usage is fixed after a pre-specified number of updates. The performance of the proposed method, in terms of accuracy, sensitivity and specificity, is consistently better than or equal to the offline method that it builds upon depending on the sample size of the individual data.

Over the past decade, China has witnessed fast-paced technological advancements in the media industry, as well as major shifts in the health agenda portrayed in the media. Therefore, a key starting point when discussing health communication lies in whether media attention and public attention towards health issues are structurally aligned, and to what extent the news media guide public attention. Based on data mined from 73,060 sets of the Baidu Search Index and Media Index on 20 terms covering different types of cancer from 2011 to 2020, the Granger test demonstrates that, in the last decade, public attention and media attention towards cancer in China has gone through two distinct phases. During the first phase, 2011-2015, Chinese news media still held the key in transferring the salience of issues on most cancer types to the public. In the second phase, from 2016-2020, public attention towards cancer has gradually diverged from media coverage, mirroring the imbalance and mismatch between the demand of active public and the supply of cancer information from news media. This study provides an overview of the dynamic transition on cancer issues in China over a ten-year span, along with descriptive results on public and media attention towards specific cancer types.

Early identification of fetal abnormalities is a huge challenge for modern obstetrics. Quantitative fluorescent polymerase chain reaction (QF-PCR) has quickly become an effective means of chromosome anomaly detection due to its advantages in terms of timing, manpower and accuracy. The QF-PCR results also make a significant change in clinicians’ attitude to some extent, assisting them providing parents with professional and valuable advice on pregnancy management. In this review, the advantages and drawbacks of QF-PCR will be explored. By reviewing studies published in Vietnamese Medical Journals, we conclude QF-PCR can become a potential screening test in the field of prenatal diagnosis.

Background: Flow-through dot-blot assay (FT-DBA) for SARS-CoV-2 specific IgG detection will provide a reliable and affordable immunoassay for the rapid serosurveillance against COVID-19. Method: SARS-CoV-2 antigens were immobilized on nitrocellulose membrane to capture IgG immunoglobulins, which were then detected with AuNP anti-human IgG. A total of 181 samples were characterized with in-house and commercial immunoassay. The positive panel consisted of RT-PCR positive samples from patients with both <14 days and >14 days from the onset of symptoms, while the negative panel contained samples collected either from the pre-pandemic era dengue patients from healthy donors during the pandemic period. Results: In-house ELISA selected a total of 79 true seropositive and 100 seronegative samples. The sensitivity of samples with <14 days using FT-DBA was 94.7% which increased to 100% for samples >14 days. The overall detection sensitivity and specificity were 98.8% and 98%, respectively, whereas the overall PPV and NPV were 97.6% and 99%. Moreover, comparative analysis between ELISA and FT-DBA revealed clinical agreement of Cohen’s Kappa value of 0.944. Conclusion: The assay can confirm past SARS-CoV-2 infection with high accuracy within 2 minutes compared to ELISA. It can help track SARS-CoV-2 disease progression, population screening, and vaccination response.

Maximal heart rate (HRmax) is a widely used measure of cardiorespiratory fitness. Prediction of HRmax is an alternative to cardiopulmonary exercise testing (CPET), but its accuracy among endurance athletes (EA) requires evaluation. This study aimed to externally validate HRmax prediction models in the EA independently for running and cycling CPET. 4043 runners (age=33.58 (8.12) years; 83.53% males; BMI=23.66 (2.54) kg·m−2) and 1026 cyclists (age=36.88 (9.03) years; 89.67% males; BMI=24.04 (2.65) kg·m−2) underwent maximum CPET. Student t-test, mean absolute percentage error (MAPE), mean absolute error (MAE), and root mean square error (RMSE) were applied to externally validate 8 running and 5 cycling HRmax equations. HRmax was 184.60 (9.79) beats·min−1 and 182.66 (10.28) beats·min−1 respectively for running and cycling, p=0.001. Measured and predicted HRmax differed significantly (p=0.001) for 9 of 13 (69.23%) models. HRmax was overestimated by 8 (61.54%) and underestimated by 5 (38.46%) formulae. Overestimated HRmax ranged 0.08-4.94 beats·min−1 and underestimated HRmax ranged 0.03-4.90 beats·min−1. MAE and RMSE were 0.18-4.94 beats·min−1 and 9.13-10.47, respectively. MAPE ranged 3.95-4.69%. Prediction models do not allow for accurate estimation of HRmax. HRmax was more often underestimated than overestimated. Predicted HRmax can be implemented for EA as a supplemental method but CPET is the preferable approach.

Low Emission Zone (LEZ) is an important mechanism to limit the negative environmental impact of traffic pollution in an urban area. Car traffic in the zone is strictly regulated to meet certain technical and environmental criteria. Such solutions of urban environment protection are gaining popularity, especially in European conurbations. Nowadays there are above 300 zones in Europe, mostly established in Italy and Germany. So far there are no LEZs in Eastern and Central European countries. However, the Warsaw authorities are just discussing launching of a LEZ in the city in 2024. According to the ongoing project, the zone is to be launched gradually, in five phases between 2024 and 2032, with the traffic criteria being tightened accordingly. The progressive emission reductions of the predominant pollutants in LEZ in consecutive phases were estimated on the basis of the Real Driving Emissions (RDE) test, carried out in 2020 by the ICCT. The gradually reduced emissions of NOx and PM were subsequently utilized as the input dataset for the regional CALPUFF model predictions, to calculate concentrations of these main traffic-induced pollutants within the LEZ area. The direct effect of the zone activation is reduction of air pollution in the urban center, which is mostly exposed to the pollution risk due to heavy traffic. Computer simulations reveal that implementation of the zone in the case of Warsaw will result in a quite significant reduction of NOx concentrations within the LEZ, such that its mean concentration in the zone becomes comparable to the rest of the conurbation. However, it will bring only a slight reduction of PM2.5 concentrations. This situation is due to the long-standing dominance of coal combustion in the Polish economy, which also applies to the urban municipal sector. As a consequence, particulate matter emissions of this sector are clearly predominant over the road traffic contribution. Balance can be achieved once the ongoing de-carbonization of the national economy has been completed.

The acetylcholinesterase-inhibitory potential of the oleanane-type triterpenes and their glycosides from the Terminalia arjuna (Combreatceae) bark, i.e. arjunic acid, arjunolic acid, arjungenin, arjunglucoside I, sericic acid, and arjunetin, is presented. The studies are based on the in silico pharmacokinetic and biomimetic studies, the acetylcholinesterase (AChE) inhibitory activity tests, and the molecular docking research. Based on the calculated pharmacokinetic parameters, arjunetin and arjunglucoside I are indicated as able to cross the blood-brain barrier. The compounds of interest exhibit marked acetylcholinesterase inhibitory potential, which was tested in the TLC bioautography test. The longest time to reach brain equilibrium is observed for both the arjunic and arjunolic acids and the shortest one for arjunetin. All compounds exhibit high and relatively similar magnitude of binding energies, varying from ca. -15 to -13 kcal/mol. The superposition of the most favorable positions of all ligands interacting with AChE is analyzed. The correlation between the experimentally determined IC50 values and the steric parameters of the molecules is investigated. The inhibition of the enzyme by the analyzed compounds shows their potential to be used as cognition enhancing agents. For the most potent compound (arjunglucoside I; ARG), the kinetics of AChE inhibition is tested. The Michaelis–Menten constant (Km) for the hydrolysis of the acetylthiocholine iodide substrate was calculated to be 0.011 mM.

The objective of this study was to investigate the liquefaction resistance of chemically improved sandy soils in a straightforward and accurate manner. Using only the existing experimental databases and artificial intelligence, the goal was to make predictions without conducting physical experiments. Emphasis was placed on the significance of data from 20 loading cycles of cyclic undrained triaxial tests to determine the liquefaction resistance and the contribution of each explanatory variable. Different combinations of explanatory variables were considered. Regarding the predictive model, it was observed that a case with the liquefaction resistance ratio as the dependent variable and other parameters as explanatory variables yielded favorable results. In terms of exploring combinations of explanatory variables, it was found advantageous to include all variables as doing so consistently resulted in a high coefficient of determination. The inclusion of the liquefaction resistance ratio in the training data was found to improve the predictive accuracy. In addition, the results obtained when using a linear model for the prediction suggested the potential to accurately predict the liquefaction resistance using historical data.

The widespread use of epoxy resin (ER) in industry, owing to its excellent properties, aligns with the global shift toward greener resources and energy-efficient solutions, where utilizing metal oxides in 3D printed polymer parts can offer extended functionalities across various industries. ZnO concentrations in polyurethane acrylate composites impacted adhesion and thickness of DLP samples, with 1 wt.% achieving a thickness of 3.99±0.16 mm, closest to the target thickness of 4 mm, while 0.5 wt.% ZnO samples exhibited the lowest deviation in average thickness (±0.03 mm). Tensile strength in digital light processed (DLP) composites with ZnO remained consistent, ranging from 23.29 MPa (1 wt.%) to 25.93 MPa (0.5 wt.%), with an increase in ZnO concentration causing a reduction in tensile strength to 24.04 MPa and a decrease in the elastic modulus to 2001 MPa at 2 wt.% ZnO. The produced DLP samples, with their good corrosion resistance in alkaline environments, are well-suited for applications as protective coatings on tank walls. Customized DLP techniques can enable their effective use as structural or functional elements, such as in Portland cement concrete walls, floors and ceilings for enhanced durability and performance.

Urban air quality is increasingly being studied as a fraction of the world's population is now living in megacities. In this study, particulate matter (PM) along Taft Avenue, Manila, Philippines, is investigated in terms of its ability to induce genetic damage on human peripheral blood lymphocytes (PBL). Size-segregated roadside air samples were obtained from 2015-2016 near the university gate and analyzed using in vitro micronucleus and cytokinesis-block proliferation tests. While cellular proliferation was unaffected by 0 – 0.1 kg·m-3 of PM1.0 and PM2.5, PBL cells treated with PM2.5 displayed significantly higher micronucleus count (p = 0.03) compared to the cells treated with PM1.0. Atomic Absorption Spectroscopy revealed greater amounts of Cd, Ca, Pb, K, Na, and Zn in PM2.5 compared to PM1.0. The results indicate the differences in composition of the two size fractions of air particulates are associated with their genotoxicities.

Silty clay modified by fly ash and crumb rubber is a kind of sustainable subgrade filler which has good anti-freeze-thaw resistance stability but wake vibration isolation performance. The objective of this study was to improve the vibration isolation of the modified soil and investigate the vibration isolation effect of the composite subgrade structure of XPS plates and the modified soil by indoor impact test. First, the vibration isolation performance of silty clay, modified soil and composite subgrade structure was respectively evaluated. Second, the effect of XPS plate’s thickness and vibration intensity on the vibration performance of the composite subgrade structure were evaluated. Third, the vibration isolation performance of the test groups under the condition of freeze-thaw cycles was assessed. The results show that the vibration isolation performance of subgrade can be effectively improved by setting XPS plates. The composite subgrade structure has certain vibration isolation effect, especially in vertical direction. Considering vibration isolation performance and costs, 5cm is the optimum XPS plates thickness. The composite subgrade structure has great vibration isolation performance under the condition of freeze-thaw cycles, so it is suitable to be applied in road subgrade in seasonal frozen regions.

Disposable absorbent hygiene products have evolved for superior performance, enhancing the convenience of daily lives. Yet the use of disposable hygiene pads has brought safety concerns on chemical exposure, and significant efforts have been made to assess the potential risks associated with use of hygiene pads. This article intends to overview the safety assessment framework of diapers and feminine pads, which includes hazard identification, hazard characterization, exposure assessment, risk characterization, and postmarket risk management. Risk assessment of various constituents are reviewed for quantification methods and conservative estimation of exposure parameters. By reviewing the up-to-date considerations in risk assessment, we aim to provide insightful discussion on safety evaluation of current versions of disposable absorbent products. More clinical testing and postmarket surveillance are needed for continuous monitoring of potential health impacts of advanced products and constituents.

Background: Cognitive for patients with neurocognitive disorders are mostly measured by Montreal Cognitive Assessment (MoCA) and Visual Cognitive Assessment Test (VCAT) as screening tools. These cognitive scores are usually left skewed and the results of association analysis might not be robust. This study aims to study the distribution of the cognitive outcomes and to discuss potential solutions. Materials and Methods: The inverse transformed cognitive outcomes are modelled using different statistical distributions. Robustness of the proposed models are checked under different scenarios: with intercept only, models with covariate, with and without bootstrapping. Results: Main results were based on VCAT score, and validated via MoCA score. Findings suggested that the inverse transformation method improves modelling the cognitive scores compared to the conventional methods using the original cognitive scores. Association of baseline characteristics (age, gender and years of education) and the cognitive outcomes were reported as estimates and 95% confidence intervals. Bootstrap methods improved the estimate precision and the bootstrapped standard errors of the estimates are more robust. Cognitive outcomes are widely analyzed using linear regression models with default normal distribution as a conventional method. We compared the results of our suggested models with the normal distribution under various scenarios. Goodness-of-fit measurements were compared between proposed models and conventional methods. Conclusions: The findings support the use of the inverse transformation method to model the cognitive outcomes instead of the original cognitive scores for early stage neurocognitive disorders where the cognitive outcomes are left skewed.

This study examined the efficacy of essential oil (EO) obtained from the Australian native plants, lemon myrtle (Backhousia citriodora) (LM) to inhibit Penicillium digitatum by in vitro agar diffusion and vapor assay, and in inoculated oranges. Gas chromatograph/mass spectrometry analysis revealed the main constituent of LM EO as citral. Pure citral was also included in the experiment for com-parison. LM EO at 1, 2, 3, 4 and 5 µL disc-1 in the in vitro tests significantly inhibited fungal growth compared to the non-treated control. Moreover, LM EO at 4 and 5 µL disc-1 in both the assays completely inhibited fungal growth similar to its main component of citral. Inoculated oranges dipped in 1000 μL L-1 LM EO solutions for 5, 10, 15 and 30 sec showed significantly lower fungal wounds compared to control. While higher dipping times generated slight rind injury, a 5 and 10 sec dip did not cause any injury to the fruit rind. The quality assessments and sensory evaluations also revealed that the addition of LM EO did not adversely affect the quality and taste of the oranges. These findings suggest LM EO as an alternative to synthetic fungicides to inhibit wastage in citrus during storage.

The paper investigates the influence of ion nitriding on the microstructure, corrosion resistance, and tensile strength at elevated temperatures of Haynes 282 nickel superalloy specimens produced by the Direct Metal Laser Sintering-DMLS technique. Analysis of the specimens’ surface morphology revealed that the ion nitriding process significantly affects the physical and chemical phenomena occurring on the surface of the specimens. Phase composition and stress analysis showed that Haynes 282 nickel alloy specimens produced by the DMLS technique and a chromium nitride layer produced in the ion nitriding process have tensile stress. The layer is also characterized by high nanohardness compared to specimens produced using the classical method (wrought) and DMLS technique. The conducted corrosion resistance tests confirmed the positive effect of the nitrided layer on the corrosion resistance of Haynes 282 nickel alloy produced by the DMLS technique. The ion nitriding process did not significantly affect the elevated-temperature tensile strength of Haynes 282 nickel alloy specimens produced by the DMLS technique.

Silicon-based microchannel technology offers unmatched performances for cooling high energy physics silicon-pixels detectors. Although Si-Si direct bonding, used for the fabrication of cooling plates, meets the stringent requirements of this application, in particular high-pressure resistance (~200 bar), it is reported to be a challenging and expensive process. In this work, we have evaluated two alternative bonding methods towards a more cost-effective fabrication process: Si-Glass-Si anodic bonding (AB) with a thin-film glass and Au-Au thermocompression (TC). The bonding strength of the two methods were evaluated with destructive pressure burst tests (0 - 690 bar) on test structures, each made of a 1×2 cm² silicon die etched with a tank and an inlet channel and sealed with a plain silicon die using AB or TC bonding. The pressure resistance of the structures was measured to be higher for the TC sealed samples (max. 690 bar) than for the AB ones (max. 530 bar) but less reproducible. The failure analysis indicates that the AB structure resistance is limited by the adhesion force of the deposited layers. Nevertheless, both the TC and AB methods provided sufficient bond quality to hold the high pressure required for the high energy physics pixel detectors cooling application.

To win a taekwondo competition, more points must be scored, and the key to scoring points is to improve the motor performance of the kick. The wing kick is an offensive and defensive maneuver. Core stability appears to be important for improving athletic performance, but the specific relationship and effect of core stability on athletic performance in the aerial phase of taekwondo is unclear. The aim of this study was to investigate the relationship between core stability and athletic performance in taekwondo in order to provide appropriate theoretical support for training and to help coaches and athletes to improve athletic performance. A total of 16 subjects (height: 167.34±9.2 cm; weight: 61±8.96 kg; age: 24.7±3.25 years) were studied. Data were captured using 13 infrared cameras at 120Hz, kinematic and kinetic data were captured using a motivated motion capture system, and the data were exported to Visual3D in order to calculate the execution time of the aerial phase, the angular momentum of the left lower extremity, and MVC analysis of the EMG using EMG works. The core stability level of the subjects were measured using the Sahrmann Core Stability Test (SCST) to correlate with the other data, and then the subjects were grouped according to their core stability levels and the data from both groups were analyzed with t-tests. Results During the double fly lifting of aerial segments, SCST levels showed a very strong negative correlation with execution time (r= -0.739) and there was a statistically significant difference in execution time between high and low SCST levels (p &lt; 0.001), and the desired negative correlation was also seen in lower limb angular momentum X-axis (thigh r= -0.6294, shank r= -0.536, foot r= -0.6175), especially in the X-axis. The left rectus femoris (LRF) data had greater activation in the low SCST group(p=0.0019*). Through this experiment, we found that athletes with high core stability had faster execution times, lower angular momentum, and higher core muscle activation. Therefore, we conclude that incorporating core stability training into taekwondo training has the potential to improve kicking performance.

Background and Aims. Most research on Parkinson's disease (PD) focuses on describing symp-toms and movement characteristics. Studies rarely focus on the early detection of PD and the search for suitable markers of a prodromal stage. Early detection is important, so treatments that may potentially change the course of the disease can be attempted early on. While gait disturb-ances are less pronounced in the early stages of the disease, the prevalence, and severity increase with disease progression. Therefore, postural instability and gait difficulties could be identified as sensitive biomarkers. The aim was to evaluate the discriminatory power of the Trail-Walking Test (Schott, 2015) as a potential diagnostic instrument to improve the predictive power of the clinical evaluation concerning the severity of the disease and record the different aspects of walking. Methods. 20 older healthy (M = 72.4 years, SD = 5.53) adults and 46 older adults with PD and the motor phenotypes postural instability/gait difficulty (PIGD; M = 69.7 years, SD = 8.68) and tremor dominant (TD; M = 68.2 years, SD = 8.94) participated in the study. The participants performed a motor-cognitive dual task (DT) of increasing cognitive difficulty in which they had to walk a given path (condition 1), walk to numbers in ascending order (condition 2), and walk to numbers and letters alternately and in ascending order (condition 3). Results. With an increase in the cognitive load, the time to complete the tasks (seconds) become longer in all groups, F(1.23, 73.5) = 121, p < .001, ɳ2p = .670. PD-PIGD shows the longest times in all conditions of the TWT, F(2, 60) = 8.15, p < .001, ɳ2p = .214. Mutual interferences in the cognitive and motor domain can be observed. How-ever, clear group-specific patterns cannot be identified. A differentiation between the motor phenotypes of PD is especially feasible with the purely motor condition (TWT-M; AUC = . 685, p = 0.44). Conclusions. PD patients with PIGD must be identified by valid, well-evaluated clinical tests that allow a precise assessment of the disease's individual fall risk, the severity of the dis-ease, and the prognosis of progression. The TWT covers various aspects of mobility, examines the relationship between cognitive functions and walking, and enables differentiation of the motor phenotypes of PD.

To control the COVID-19 pandemic, many countries implemented vaccination and imposed societal restrictions both at the national level and for international travel. As a check of the corona status, a COVID pass has been issued. A COVID pass could be obtained when fully vaccinated against COVID-19, having recovered from a documented COVID-19 episode, or a recent (24-48 hours) negative SARS-CoV-2 antigen test. A global analysis of SARS-CoV-2 immune status (determined by past infection and/or vaccination), vaccination rates, as well as societal restrictions in controlling the COVID-19 pandemic is presented.

Yaws is a skin debilitating disease caused by Treponema pallidum subspecies pertenue with most cases reported in children. World Health Organization (WHO) aims at total eradication of this disease through mass treatment of suspected cases followed by an intensive follow-up program. However, effective diagnosis is pivotal in the successful implementation of this control program. Recombinase polymerase amplification (RPA), an isothermal nucleic acid amplification technique offers a wider range of differentiation of pathogens including those isolated from chronic skin ulcers with similar characteristics such as Haemophilus ducreyi (H. ducreyi). We have developed a duplex RPA assay for the simultaneous detection of Treponema pallidum (T. pallidum) and H. ducreyi (TPHD-RPA). TPHD-RPA assay demonstrated no cross-reaction with other pathogens and enable detection of T. pallidum and H. ducreyi within 15 minutes at 42 oC. The duplex RPA assay was validated with 49 clinical samples from individuals confirmed to have yaws by serological tests. Compared with commercial multiplex real-time PCR, the TPHD-RPA assay demonstrated 94-95% sensitivity for T. pallidum and H. ducreyi confirmed samples, respectively and 100% specificity. This simple novel TPHD-RPA assay enables the rapid detection of both T. pallidum and H. ducreyi in yaws-like lesions. This test could support the yaws eradication programs by ensuring effective diagnosis as well as enable monitoring of eradication efforts success or failure and planning of follow-up interventions at the community level.

Sentinel-1A/B radar remote sensing data were applied for the first time to determine the sixth nuclear test, its underground explosion h-bomb location and affected zone in North Korea, on September 3, 2017. Location of epicenters nuclear test were found according to line-of-sight displacement images via its maximum value. Line-of-sight displacement images were obtained by processing in the GMTSAR package in the VirtualBox virtual machine of the Linux Ubuntu 16.04 operation system. In this research, three scenes Sentinel-B data with descending orbits were considered, one after and two before the event (the nuclear test date) scene were used.

Precise classification of sarcomas is crucial to drive optimal clinical management. In this prospective, multicenter, observational study within the Hellenic Group of Sarcoma and Rare Cancers (HGSRC) we assessed the effect of expert pathology review, coupled with the application of molecular diagnostics, on diagnosis and management of sarcoma patients. Newly diagnosed sarcoma patients were addressed by their physicians to one of the two sarcoma pathologists of HGSRC for histopathological diagnostic assessment. RNA next-generation sequencing was per-formed to all samples, using a platform targeting 86 sarcoma gene fusions. Additional molecular methods were performed on the opinion of the expert pathologist. Therefore, the expert pathologist provided a final diagnosis based on the histopathological findings and, when necessary on molecular tests. In total, 128 specimens from 122 patients were assessed. Among the 119 cases in which there was a preliminary diagnosis by a non-sarcoma pathologist, there were 37 modifications in diagnosis (31.1%) by the sarcoma pathologist, resulting in 17 (14.2%) modifications in management. Among the 110 cases in which molecular tests were performed, there were 29 modifications in diagnosis (26.4%) through the genomic results, resulting in 12 (10.9%) modifications in management. Our study confirms that expert pathology review is of utmost importance for the optimal sarcoma diagnosis and management and should be assisted by molecular methods in selected cases.

Zika virus (ZIKV) co-circulates with several closely related flaviviruses which exhibit similar clinical manifestations thus, clinicians rely on molecular and serological techniques for diagnosis. Cross-reactivity of patient specimens to flaviviruses is a significant impediment to serological diagnosis in areas where multiple flaviviruses co-circulate. Furthermore, patient exposure history to any of these viruses could complicate serological response patterns which could result in over and/or underdiagnosis of ZIKV infection. Three strains of ZIKV, dengue serotypes 1-4, West Nile virus, Japanese Encephalitis virus, and Yellow Fever virus were evaluated for neutralizing properties against 3 monoclonal antibodies, 4 ZIKV-naïve patients with flavivirus exposure history, 5 patients with verified ZIKV exposure and unknown flavivirus exposure history, and 5 flavivirus-naive patients with ZIKV-only exposure. Patients naïve for ZIKV exposure effectively neutralized multiple strains of ZIKV. Overall, the prototype ZIKV isolate MR-766 did not behave like the other ZIKV isolated used in this study. MR-766 was neutralized more completely by polyclonal patient serum than recent ZIKV isolates. MR-766 was neutralized better than dengue virus in ZIKV-naïve patients with prior dengue exposure. MR-766 was neutralized significantly less than recent ZIKV isolates when treated with monoclonal antibodies. The data herein show that without RT-PCR, serological diagnosis may not be possible in areas where multiple flaviviruses are endemic.

The optical reflection characteristics of asphalt pavement are an important influencing factor in road lighting design, and the macro and micro textures of asphalt pavement significantly affect its reflection characteristics. To investigate the impact of texture parameters on the retroreflection coefficient of asphalt pavement, this study obtained the macroscopic and microscopic texture properties of rutting board specimens and on-site asphalt pavement using a pavement texture tester. The macro- and microtexture parameters, such as macroscopic texture distribution density (D1), microscopic texture distribution density (D2), profile height root-mean-square (Rq), profile slope root-mean-square (Δq), skewness Rsk and kurtosis Rku, were measured, and the corresponding retroreflection coefficient RL was measured using a retro-reflectometer. In the laboratory ex-periments, rutting specimens of AC-13, SMA-13, and OGFC-13 asphalt mixtures were formed. The changes in texture parameters and retroreflection coefficient of different rutting specimens before and after crushing were studied, and a factor influence model between macro- and microtexture parameters and RL was established. And the correlation models of texture index and RL of asphalt pavement are further established. The results showed that in the single factor model, the param-eters can be used to characterize RL with high prediction accuracy, whereas for the on-site meas-urements, the three parameters of Δq, Rsk, and Rku can characterize the RL well. The nonlinear model established on the basis of the B-P neural network algorithm improves its prediction ac-curacy. This research can provide ideas for optimizing the reflection characteristics of asphalt pavement and further provide a decision-making basis for road lighting design.

The accurate of model attitude angel plays an important role on the aerodynamic test results in the wind tunnel test. The original method applies the spherical coordinate system transformation to obtain attitude angel calculation. The model attitude angel is obtained by coordinate transformation and spherical surface mapping applying the nominal attitude angel (the balance attitude angel in the wind tunnel coordinate system) indicated by the mechanism. First, the coordinate transformation of this method is not only complex but also difficult to establish the transformed relationship between the space coordinate systems especially after many steps of coordinate transformation, moreover it cannot realize the iterative calculation of the interference relationship between attitude angels; Second, during the calculate process to solve the problem the arc is approximately used to replace the straight line, the angel for the tangent value, and the inverse trigonometric function is applied. Therefore, in the calculation of attitude angel, the process is complex and inaccurate, which can be solved approximately when calculating small attack angel. However, with the advancing development of modern aerodynamic unsteady research, the aircraft tends to develop high or super large attack angel and unsteady research field. According to engineering practice and vector theory, the concept of vector angel coordinate system is proposed for the first time, and the vector angel coordinate system of attitude angel is established. With the iterative correction calculation and avoiding the problem of approximate and inverse trigonometric function solution, the model attitude calculation process is carried out in detail, which validates that the calculation accuracy and accuracy of model attitude angels are improved. Based on engineering and theoretical methods, a vector angel coordinate system is established for the first time, which gives the transformation and angel definition relations between different flight attitude coordinate systems, that can accurately calculate the attitude angel of the corresponding coordinate system and determine its direction, especially in the channel coupling calculation, the calculation of the attitude angel between the coordinate systems is only related to the angel, and has nothing to do with the change order s of the coordinate system, which simplifies the calculation process.

The formability and failure behavior of TRIP steel blanks were investigated through various stress states. The forming limit diagram (FLD) at fracture is constructed both experimentally and numerically. Numerical studies are performed to evaluate the applicability of different damage criteria in predicting the FLD as well as complex cross-die deep drawing process. The fracture surface and numerical results revealed that the material failed in a different mode for different strain path. Therefore, Tresca model which is based on shear stress accurately predicted the conditions where shear had the profound effect on the damage initiation, whereas Situ localized necking criterion was able to calculate the conditions which localization was dominant.

This research is aimed to develop the method for damage degree evaluation in metals and alloys during their deformation and destruction based on acoustic emission (AE) technique. Experimental studies were carried out on tensile specimens of high-strength steel with simultaneous registration of AE signals in tested material. It was shown that the time-dependent AE primary parameters, such as the AE signal maximum amplitudes and AE activity, do not have a clear relationship with the material damage degree. This fact makes it difficult to use standard methods for assessing the damage degree of acoustic signal sources, including defects. It was proposed to use the Kolmogorov-Smirnov criterion to differ the processes of metal plastic deformation and crack propagation during the rupture. The possibility of estimating the material damage degree by high-energy AE hits share was shown. Besides, a particular expression was obtained for evaluating the damage degree for the material under study.

The cold-formed steel sections are becoming popular for different steel structures because it has a high resistance against the different straining actions with minimum weight compared with hard steel sections. Recently, the perforated cold-formed steel (PCFS) sections are used in many applications such as storage perforated uprights racks. Experimental research into the behaviour of steel storage rack uprights subjected to axial compression is presented in this paper. The material qualities of cold-formed steel uprights were determined by tensile tests. The seventeen perforated specimens were examined under axial compression, with five different cross-sections, three different web heights and thicknesses, and varying lengths. The study's goals are to find out how perforations affect the performance and failure mode of steel storage rack uprights, discuss the interaction of distortional and global buckling, and verify the accuracy of using the Direct Strength Method (DSM) for predicting the ultimate strength of uprights failing in buckling interactions for perforated uprights. It is found that the failure modes of perforated specimens with stiffeners generally cannot be well predicted by the Direct Strength Method. But when the modifications proposed by Xianzhong Zhao etc. al. are used, their accuracy is acceptable.

Genome-wide association studies (GWAS) have successfully revealed many disease-associated genetic variants. For a case-control study, the adequate power of an association test can be achieved with a large sample size, although genotyping large samples is expensive. A cost‐effective strategy to boost power is to integrate external control samples with publicly available genotyped data. However, the naïve integration of external controls may inflate the type I error rates if ignoring the systematic differences (batch effect) between studies, such as the differences in sequencing platforms, genotype calling procedures, population stratification, and so forth. To account for the batch effect, we propose an approach by integrating External Controls into the Association Test by Regression Calibration (iECAT-RC) in case-control association studies. Extensive simulation studies show that iECAT-RC not only can control type I error rates but also can boost statistical power in all models. We also apply iECAT-RC to the UK Biobank data for M72 Fibroblastic disorders by considering genotype calling as the batch effect. Four SNPs associated with Fibroblastic disorders have been detected by iECAT-RC and the other two comparison methods. However, our method has a higher probability of identifying these significant SNPs in the scenario of an unbalanced case-control association study.

In patients with prior Takotsubo syndrome (TTS), long lasting functional cardiac limitations were described as compared with normal subjects. Emotions-triggered Takotsubo syndrome (E-TTS) has more favorable outcomes than TTS preceded by a physical trigger or by no identifiable fac-tors. The aim of the present study was to assess long-term cardiac functional limitations in a co-hort of asymptomatic E-TTS patients. We enrolled n=39 asymptomatic patients with a diagnosis of E-TTS. Cardiopulmonary exercise tests (CPET) were performed at 30 [12-40] months median fol-low-up from the acute event. A cohort of n=39 individuals matched for age, sex, body mass index and comorbidities served as control. Despite recovery of left ventricular ejection fraction, patients with prior E-TTS had lower peak VO2 and percentage of predicted peak VO2 (17.8 ± 3.6 vs 22.5 ± 6.5; P < 0.001 and 75.2 ± 14.1 % vs 100.6 ± 17.1%, P <0.001), VO2 at anaerobic threshold (AT) (11.1 [10.1-12.9] vs 14.4 [12.5-18.7]; P <0.001), peak O2 pulse (9.7 ± 2.5 vs 13.1 ± 3.5; P <0.001) and higher VE/VCO2 slope (30.4 ± 3.7 vs 27.2 ± 3.5; P <0.001) compared with matched controls. We found no statistically significant differences in heart rate reserve (HRR), respiratory equivalent ratio (RER), mean blood pressure and peak PetCO2 between patients and controls. Despite its favorable out-come, patients with E-TTS in our population were found to have subclinical long-term functional cardiac limitations as compared with a control cohort.

A simulation test system for the two-dimensional (2D) fuze overload loading process was designed to address the loading issues of recoil overload and centrifugal overload in fuze safety and arming (S&amp;A) devices. By incorporating centrifuge rotation energy storage, impact acceleration simulation, and equivalent centrifugal rotation simulation, a block equipped with a fuze S&amp;A device was accelerated instantly upon being impacted by a centrifuge-driven impact hammer, simulating recoil overload loading. The impact hammer was retracted instantaneously by adopting an electromagnetic brake, which resulted in the centrifugal rotation of the block around its track, to simulate the centrifugal overload loading. The dynamic equations of the simulation test system and the equations of impact hammer motions were established, whereby the rotation speed of the centrifuge and the braking force of the electromagnetic brake were calculated and selected. A dynamic model of the collision between the impact hammer and block was established using ANSYS/LS-DYNA software for simulation analysis. The acceleration curves of the recoil overload and centrifugal overload with variations in the centrifuge speed, cushion material, and buffer thickness were obtained, which verified the feasibility of the proposed loading simulation method. 2D overload loading simulation tests were performed using the developed simulation system, and the acceleration curves of the recoil overload and centrifugal overload were measured. The test results indicated that the proposed system can accomplish 2D overload loading simulations for a recoil overload of several 10000 g and centrifugal overload of several 1000 g.

The aim of this study was to develop and assess the reliability and validity of an innovative field test that measures lower limb explosive power in basketball players (i.e., alactic anaerobic capacity) for the dominant and non-dominant leg. The test examines the performance of vertical, horizontal, and combined movements while holding the ball – similar to penetration of the basket or layup. Such capabilities are required throughout basketball practice and games, combined with upper and lower body coordination. The study included 22 male basketball players, ages 16-18, members of an elite youth league team in Israel. To assess validity, the participants performed the test for each leg, followed by nine standardized tests that were developed for a range of ball games, including basketball. To assess reliability, the participants performed a retest of the unique test 72-hours later. Our findings indicate the validity and reliability of the proposed anaerobic alactic field test for basketball players, for the dominant and non-dominant leg. Moreover, strong correlations were seen between the novel test and the standardized tests, with a high correlation for horizontal explosive power (0.5<r<0.7), a very high correlation for vertical explosive power (0.7<r<0.9), and a nearly perfect correlation for the two combined (r>0.9). In conclusion, this unique field test for basketball players could assist coaches in developing and applying optimal training programs and game plans, for players individually, and for the team as a whole. As the test measures each leg separately, it could also offer an assessment tool following players’ injuries.

Understanding neck pain is an important societal issue. Kinematic data from sensors may help to gain insight on the pathophysiological mechanisms associated with neck pain through a quantitative sensorimotor assessment of one patient. The objective of this study was to evaluate the potential usefulness of artificial intelligence with several Machine Learning (ML) algorithms in assessing neck sensorimotor performance. Angular velocity and acceleration measured by an inertial sensor placed on the forehead during the DidRen laser test in thirty-eight acute and subacute non-specific neck pain (ANSP) patients were compared to forty-two healthy control participants (HCP). Seven supervised ML algorithms were chosen for the predictions. The most informative kinematic features were computed using Sequential Feature Selection methods. The best performing algorithm is the Linear Support Vector Machine with an accuracy of 82% and Area Under Curve of 84%. The best discriminative kinematic feature between ANSP patients and HCP is the first quartile of head pitch angular velocity. This study has shown that supervised ML algorithms could be used to classify ANSP patients and identify discriminatory kinematic features potentially useful for the clinicians in the assessment and monitoring of the neck sensorimotor performance in ANSP patients.

Severe malaria in adults is not well studied in Sahelian Africa. Clinical features and mortality associated with severe Plasmodium falciparum malaria in adult patients hospitalized in Kiffa, southern Mauritania, were analysed. Patients over 15 years old admitted for severe malaria between August 2016 and December 2019 were included in the present retrospective study. The World Health Organization (WHO) criteria were used to define severe malaria. The presenting clinical characteristics and outcome were compared. Of 4266 patients hospitalized during the study period, 573 (13.4%) had a positive rapid diagnostic test for malaria, and 99 (17.3%; mean age, 37.5 years; range 15–79 years; sex-ratio M/F, 2.1) satisfied the criteria for severe malaria. On admission, the following signs and symptoms were observed in more than one-fourth of the patients: fever (98%), impairment of consciousness (81.8%), multiple convulsions (70.7%), cardiovascular collapse (61.6%), respiratory distress (43.4%), severe anaemia ≤ 80 g/L (36.4%), haemoglobinuria (27.3%), and renal failure (25.3%). Patients were treated with parenteral quinine or artemether. Fourteen (14.1%) patients died. Multiple convulsions, respiratory distress, severe anaemia, haemoglobinuria, acute renal failure, jaundice, and abnormal bleeding occurred more frequently (P < 0.05) in deceased patients. Mortality due to severe falciparum malaria is high among adults in southern Mauritania. An adoption of the WHO-recommended first-line treatment for severe malaria, i.e. parenteral artesunate, is required to lower the mortality rate associated with severe malaria.

The ongoing pandemic of COVID-19 has not only commenced a global health emergency but agitated various aspects of humanity. During this period of crisis researchers over the world have ramped their efforts to constrain the disease in all possible ways whether it is vaccination, therapy, or diagnosis. Since the spread of the disease has not yet elapsed sharing the ongoing research findings could be the key to disease control and management. An early and efficient diagnosis could leverage the outcome until a successful vaccine is developed. Molecular tests both in-house and commercial kits are preferably being used worldwide in the COVID-19 diagnosis. However, the limitation of high prices and lengthy procedures impede their use for mass testing. Keeping the constant rise of infection in mind search for an alternative test that should be cost-effective, simple, and suitable for large scale testing and surveillance is a need of an hour. One such alternative could be the immunological tests. Therefore, in the last few months deluge of immunological rapid tests has been developed and validated across the globe. The objective of the present review is to share the diagnostic performance of various immunological assays reported so far in SARS-CoV-2 case detection. The article consolidated the studies (published and preprints) related to the serological tests such as chemiluminescence, enzyme-linked and lateral flow-based point-of-care tests in COVID-19 diagnosis and updated the current scenario. This review will hopefully be an add-on in COVID-19 research and will contribute to congregate the evidence for decision-making.

There is high confidence that climate change has increased the probability of concurrent temperature-precipitation extremes, changed their spatial-temporal variations, and affected the relationships between drivers of such natural hazards. However, the extent of such changes has been less investigated in Australia. Daily weather data (131 years, 1889-2019) at 700 grid cells (1◦ × 1◦) across Australia was obtained to calculate annual and seasonal mean daily maximum temperature (MMT) and total precipitation (TPR). A nonparametric multivariate copula framework was adopted to estimate the return period of compound hot-dry (CHD) events based on an ‘And’ hazard scenario (hotter than a threshold ‘And’ drier than a threshold). CHD extremes were defined as years with joint return periods of larger than 25 years. Mann-Kendall nonparametric tests was used to analyse trends in MMT and TPR as well as in the frequency of univariate and CHD extremes. A general cooling-wetting trend was observed over 1889-1989. Significant increasing trends were detected over 1990-2019 in the frequency and severity of hot extremes across the country while trends in dry extremes were mostly insignificant (and decreasing). Results showed a significant increase in the association between temperature and precipitation at various temporal scales. The frequency of CHD extremes was mostly stable over 1889-1989, but significantly increased between 1990 and 2019 at 44% of studied grid cells, mostly located in the north, south-east and south-west. Spatial homogeneity (i.e. connectedness) and propagation of extreme events from one grid cell to its neighbouring cells was investigated across Australia. It can be concluded that this connectedness has not significantly changed since 1889.

Multiple studies reported a negative relationship between the Honesty-Humility factor of the HEXACO model and psychopathy. The Durand Adaptive Psychopathic Traits Questionnaire (DAPTQ), which was developed to assess adaptive traits known to be related to psychopathic traits, has previously demonstrate positive relationships with all factors of the Big Five Model, at the exception of a negative relationship with neuroticism. The current study aims to validate the previously reported association between the DAPTQ and the five major components of the personality, while also examining its relationship with the Honesty-Humility factor as defined by the HEXACO model. The results (N = 171) support the good internal consistency, two weeks test-retest validity and inter-correlation of the DAPTQ. A Confirmatory Factor Analysis further supports the nine-factor model of the DAPTQ. When compared to the HEXACO, the DAPTQ did not display any relationship with the Honesty-Humility factor, nor the Agreeableness and Openness factors, but kept its similar association to Emotionality, Extroversion, and Conscientiousness as initially reported in its development phase. Overall, the results support the discriminant validity of the DAPTQ to assess adaptive traits related to the psychopathic personality without overlapping with psychopathic personality traits. Results are discussed in terms of implications and further improvements to validate the DAPTQ.

Liquefaction risk assessment is critical for the safety and economics of structures. As the soil strata of Ramsar area in north Iran is mostly composed of poorly graded clean sand and the ground water table is found at shallow depths, it is highly susceptible to liquefaction. In this study, a series of isotropic and anisotropic consolidated undrained triaxial tests are performed on reconstituted specimens of Ramsar sand to identify the liquefaction potential of the area. The specimens are consolidated isotropically to simulate the level ground condition, and anisotropically to simulate the soil condition on a slope and/ or under a structure. The various states of soil behavior are studied by preparing specimens at different initial relative densities and applying different levels of effective stress. The critical state soil mechanics approach for identifying the liquefaction susceptibility is adopted and the observed phenomena are further explained in relation to the micro-mechanical behavior. As only four among the 27 conducted tests did not exhibit liquefactive behavior, Ramsar sand can be qualified as strongly susceptible to liquefaction. Furthermore, it is observed that the pore pressure ratio is a good indication of the liquefaction susceptibility

Electrical contractors have experienced a rise in occupational fatalities in recent years. In 2017, electrical contractors also had the second highest number of non-fatal injuries among specialty trade contractors. Identifying statistically significant dependencies between these catastrophic outcomes and a handful of well-defined contributing factors in construction accidents offers a first step in mitigating the risks of construction accidents in this trade. Therefore, this study used methodologies of descriptive and quantitative statistics to identify the contributing factors most affecting occupational accident outcomes among electrical contracting enterprises, given an accident occurred. Accident reports were collected from the Occupational Safety and Health Administration’s fatality and catastrophe database. To ensure the reliability of the data, the team manually codified more than 600 incidents through a comprehensive content analysis using injury-classification standards. Inclusive of both fatal and non-fatal injuries, the results showed that most accidents happened in nonresidential buildings, new construction, and small projects (i.e., $50,000 or less). The main source of injuries manifested in parts and materials (46%), followed by tools, instruments, and equipment (19%), and structure and surfaces (16%). The most frequent types of injuries were fractures (31%), electrocutions (27%), and electrical burns (14%); the main injured body parts were upper extremities (25%), head (23%), and body system (18%). Among non-fatal cases, falls (37%), exposure to electricity (36%), and contact with objects (19%) caused most injuries; among fatal cases, exposure to electricity was the leading cause of death (50%), followed by falls (28%) and contact with objects (19%). The analysis also investigated the impact of several accident factors on the degree of injuries and found significant effects from such factors such as project type, source of injury, cause of injuries, injured part of body, nature of injury, and event type. In other words, the statistical probability of a fatal accident—given an accident occurrence—changes significantly based on the degree of these factors. Beyond these outcomes, the described content-analysis methodology contributes to the accident-analysis body of knowledge by providing a framework for codifying data from accident reports to facilitate future analysis and modeling attempts (e.g., developing logistic regression models) to subsequently mitigate more injuries in other fields.

The development of hybrid rockets offers excellent opportunities for the practical education of students at universities due to a high safety and a relatively low complexity of the rocket propulsion system. During the German educational program STERN, students of the Technische Universität Braunschweig obtain the possibility to design and launch a sounding rocket with a hybrid engine. The design of engine HYDRA 4X is presented and results of first engine tests are discussed. Results for measured regression rates are compared to results from literature. Furthermore, the impact of the lightweight casing material CFRP on the hybrid engine mass and flight apogee altitude is examined for rockets with different total impulse classes (10 to 50 kNs). It is shown that the benefit of a lightweight casing material on engine mass decreases with an increasing total impulse. However, a higher gain on apogee altitude, especially for bigger rockets with a comparable high total impulse is shown.

The open communication is an exigent need for future power system where the time delay is unavoidable. In order to secure the stability of the grid, the frequency must remain within its limited range which is achieved through the load frequency control. The load frequency control signals are transmitted through communication networks which induces time delay that could destabilize the power systems. So, in order to guarantee the stability the delay margin should be computed. In this paper, we present a new method for calculating the delay margin in load frequency control systems. The transcendental time delay characteristics equation is transformed to frequency dependant equation. The spectral radius is used to find the frequencies at which the roots crosses the imaginary axis. The crossing frequencies are determined through the sweeping test and the binary iteration algorithm. A one-area load frequency control system is chosen as case study. The effectiveness of the proposed method has been proved through comparing with the most recent published methods. The method shows its merit with less conservativeness and less computations. The PI controller gains are preferable to be chosen large to reduce the damping, however, the delay margin decreases with increasing the PI controller gains.

Strata and surface movement induced by mining under open-pit final slope is a huge threat to mine safety. Physical model test is an important method to study mining-induced strata and surface movement laws. Because of rock joints predominantly control rock mass deformation and failure, thus physical model test leaving out of consideration of rock joints is difficult to reflect the influence of rock joints on rock mass deformation. Therefore, this paper presents a three-dimensional physical model test considering simplified dominant rock joints. This test process includes the design of testing equipment, the construction of physical model with dominant rock joint sets, conduction of mining and deformation monitoring. And mining under eastern final slope of Yanqianshan iron mine was selected as a case to study the behavior of mining-induced strata and surface movement.

The role of vitamin D in the prevention and treatment of non-skeletal health issues has received significant media and research attention in recent years. Costs associated with clinical management of low vitamin D (LVD) have increased exponentially. However, no clear evidence supports vitamin D screening to improve health outcomes. Authoritative bodies and professional societies recommend against population-wide vitamin D screening in community-dwelling adults who are asymptomatic or at low risk of LVD. In order to assess patterns of physician management of LVD in this conflicting environment, we conducted a scoping review of three electronic databases and gray literature. Thirty-eight records met inclusion criteria and were summarized in an evidence table. Results from seven countries showed a consistent increase in vitamin D lab tests and related costs. Many vitamin D testing patterns reflected screening rather than targeted testing for individuals at high risk of vitamin D deficiency or insufficiency. Interventions aimed at managing inappropriate clinical practices related to LVD were effective in the short term. Variability and controversy were pervasive in many aspects of vitamin D management, shining light on physician practices in the face of uncertainty. Future research is needed is needed to inform better clinical guidelines and to assess implementation practices that encourage evidence-based management of LVD in adult populations.