Attitude control of a novel regional truss-braced wing aircraft with low stability characteristics is addressed in this paper using Reinforcement Learning (RL). In recent years, RL has been increasingly employed in challenging applications, particularly, autonomous flight control. However, a significant predicament confronting discrete RL algorithms is the dimension limitation of the state-action table and difficulties in defining the elements of the RL environment. To address these issues, in this paper, a detailed mathematical model of the mentioned aircraft is first developed to shape an RL environment. Subsequently, Q-learning, the most prevalent discrete RL algorithm will be implemented in both the Markov Decision Process (MDP), and Partially Observable Markov Decision Process (POMDP) frameworks to control the longitudinal mode of the air vehicle. In order to eliminate residual fluctuations that are a consequence of discrete action selection, and simultaneously track variable pitch angles, a Fuzzy Action Assignment (FAA) method is proposed to generate continuous control commands using the trained Q-table. Accordingly, it will be proved that by defining an accurate reward function, along with observing all crucial states (which is equivalent to satisfying the Markov Property), the performance of the introduced control system surpasses a well-tuned Proportional–Integral–Derivative (PID) controller.

The prevalence of differential equations as a mathematical technique has refined the fields of control theory and constrained optimization due to the newfound ability to accurately model chaotic, unbalanced systems. However, in recent research, systems are increasingly more nonlinear and difficult to model using Differential Equations only. Thus, a newer technique is to use policy iteration and Reinforcement Learning, techniques that center around an action and reward sequence for a controller. Reinforcement Learning (RL) can be applied to control theory problems since a system can robustly apply RL in a dynamic environment such as the cartpole system (an inverted pendulum). This solution successfully avoids use of PID or other dynamics optimization systems, in favor of a more robust, reward-based control mechanism. This paper applies RL and Q-Learning to the classic cartpole problem, while also discussing the mathematical background and differential equations which are used to model the aforementioned system.

The current design of reinforcement learning methods demands exhaustive computing. Algorithms such as Deep Q-Network achieved outstanding results in the development of the area. However, the need for thousands of parameters and training episodes is still a problem. Thus, this document proposes a comparative analysis of the Q-Learning algorithm (the inception to create Deep Q Learning) and our proposed method termed M-Learning. The comparison among algorithms using Markov decision processes with delayed reward as a general testbench framework. Firstly, a full description of the main problems related to implementing Q-Learning, mainly about its multiple parameters. Then, the foundations of our proposed heuristic with its formulation and the whole algorithm were reported in detail. Finally, the methodology chosen to compare both algorithms was to train the algorithms in the Frozen Lake environment. The experimental results and an analysis of the best solutions found that our proposed algorithm highlights the differences in the number of episodes necessary and their standard variations. The code will be available on a GitHub repository once the paper is published.

The impact of financial risks extends beyond the normal operation and survival of industrial and commercial enterprises and financial institutions. They also have the potential to impede the stable development of a country's and even the world's financial economy. This is clearly demonstrated by the severe consequences of the frequent financial crises that have occurred in recent years. It thus follows that the prevention of financial risks has become one of the core tasks of the operation and management of industrial and commercial enterprises and financial institutions. Portfolio optimization techniques are employed in the construction of a variety of asset allocation models, with reinforcement learning algorithms used to dynamically adjust investment strategies with the objective of maximizing returns and minimizing risks. The preliminary construction of an asset allocation model is achieved through the utilization of a genetic algorithm. Genetic algorithms emulate the processes of natural selection and genetic variation to identify the optimal portfolio of assets that will yield the greatest returns at a pre-established level of risk. Subsequently, the Deep Q-Learning algorithm is introduced to facilitate dynamic adjustments and optimization of the asset allocation, based on the initial construction. Deep Q-learning employs deep neural networks to forecast the prospective returns of disparate investment strategies, thereby optimizing the decision-making process through continuous learning and updating. The combination of genetic algorithms and deep Q-learning enables the system to identify the optimal investment strategy under a diverse range of initial conditions and to adapt it in real-time to respond to market fluctuations and uncertainties. The experimental analysis demonstrates that the proposed method exhibits an exemplary capacity for risk control and a robust ability to generate stable income growth across diverse market environments. In simulation experiments, portfolios constructed using this method demonstrate lower volatility and higher average returns than those generated through traditional methods.

Reinforcement learning (RL) is an extensively applied control method for the purpose of designing intelligent control systems to achieve high accuracy as well as better performance. In the present article, the PID controller is considered as the main control strategy for brushless DC (BLDC) motor speed control. For better performance, the fuzzy Q-learning (FQL) method as a reinforcement learning approach is proposed to adjust the PID coefficients. A comparison with the adaptive PID (APID) controller is also performed for the superiority of the proposed method, and the findings demonstrate the reduction of the error of the proposed method and elimination of the overshoot for controlling the motor speed. MATLAB/SIMULINK has been used for modeling, simulation, and control design of the BLDC motor.

Towards smart batteries for electric vehicles (EVs) smart algorithms to control battery packs, mainly reconfigurable batteries, have to be developed. This work proposes a reinforcement learning (RL) algorithm to balance the State of Charge (SoC) of reconfigurable batteries based on the topologies half-bridge and battery modular multilevel management (BM3). As RL algorithm, Amortized Q-learning (AQL) is implemented, which allows enourmous numbers of possible configurations of the reconfigurable battery to be controlled, as well as the combination of classical controlling approach and machine learning methods. This enables safety mechanisms in control. As a neural network of the AQL a Feedforward Neuronal Network (FNN) is implemented consisting of three hidden layers. The experimental evaluation using a 12-cell hybrid cascaded multilevel converter illustrates the applicability of the method to balance the SoC and maintain the balanced state during discharge. The evaluation shows a 20.3% slower balancing compared to the classical. Nevertheless, AQL shows great potential to be applied for multiobjective optimizations as an applicable RL algorithm for control in power electronics.

This paper aims to unify q-derivative/q-integral and h-derivative/h-integral in a single definition, this will be called q−h-derivative/q−h-integral. These notions are further extended on finite interval [a,b] in the form of left and right q−h-derivatives and q−h-integrals. Some inequalities are studied for q−h-integrals which are directly connected with well known results. In diverse fields of science and engineering the theory based on q-derivatives/q-integrals and h-derivatives/h-integrals can be unified by using the concept of q−h-derivative/q−h-integral.

The main purpose of this paper is to introduce a new class of $q$-Hermite-Fubini numbers and polynomials by combining the $q$-Hermite polynomials and $q$-Fubini polynomials. By using generating functions for these numbers and polynomials, we derive some alternative summation formulas including powers of consecutive $q$-integers. Also, we establish some relationships for $q$-Hermite-Fubini polynomials associated with $q$-Bernoulli polynomials, $q$-Euler polynomials and $q$-Genocchi polynomials and $q$-Stirling numbers of the second kind.

Read-Across Structure-Activity Relationship (RASAR) is an emerging cheminformatic approach that combines the usefulness of a QSAR model and similarity-based Read-Across predictions. In this work, we have generated a simple, interpretable, and transferable quantitative-RASAR (q-RASAR) model which can efficiently predict the cytotoxicity of TiO2-based multi-component nanomaterials. The data set involves 29 TiO2-based nanomaterials which contain specific amounts of noble metal precursors in the form of Ag, Au, Pd, and Pt. The data set was rationally divided into training and test sets and the Read-Across-based predictions for the test set were generated using the tool Read-Across-v4.1 available from https://sites.google.com/jadavpuruniversity.in/dtc-lab-software/home. The hyperparameters were optimized based on the training set data and using this optimized setting, the Read-Across-based predictions for the test set were obtained. The optimized hyperparameters and the similarity approach, which yields the best predictions, were used to calculate the similarity and error-based RASAR descriptors using the tool RASAR-Desc-Calc-v2.0 available from https://sites.google.com/jadavpuruniversity.in/dtc-lab-software/home. These RASAR descriptors were then clubbed with the physicochemical descriptors and were subjected to features selection using the tool Best Subset Selection v2.1 available from https://dtclab.webs.com/software-tools. The final set of selected descriptors was used to develop multiple linear regression based q-RASAR models, which were validated using stringent criteria as per the OECD guidelines. Finally, a random forest model was also developed with the selected descriptors. The final machine learning model can efficiently predict the cytotoxicity of TiO2-based multi-component nanomaterials superseding previously reported models in the prediction quality.

In this paper, we introduce a new class of $(p,q)$-analogue type of Fubini numbers and polynomials and investigate some properties of these polynomials. We establish summation formulas of these polynomials by summation techniques series. Furthermore, we consider some relationships for $(p,q)$-Fubini polynomials associated with $(p,q)$-Bernoulli polynomials, $(p,q)$-Euler polynomials and $(p,q)$-Genocchi polynomials and $(p,q)$-Stirling numbers of the second kind.

Unmanned aerial vehicle UAV has become an important tool for emergency communication. When disaster happens, the roads in the disaster area always are seriously damaged, and theground infrastructure communication facilities are damaged. Under emergency conditions, UAV can go into key areas as communication nodes to provide communication services for users in the area.But it's difficult for UAV to cover the entire disaster area and the efficient rescue time will be delayed. Therefore, how to make the UAV accurately perceive the regional situation and deployed in the right position is worth studying. In this paper, a virtual simulation environment is established reasonably and deep reinforcement learning algorithm is used to train UAV agents. At the same time, a series of problems such as sparse reward and long training time are still not solved in the development of reinforcement learning algorithms,and the reward function is designed to improve training efficiency. First of all, we set a specific mountain emergency communication scenario, and combined with the specific application of the UAV to carry out virtual simulation, and build a virtual environment. Furthermore, an additional shaped reward function is designed to address the sparse reward problem. Through the improvement of deep Q-learning network DQN algorithm and the reward design based on potential function, the final evaluation index is improved, and the effectiveness of the algorithm is verified. The experimental results demonstrate our work can effectively shorten the training time and increase convergencerate.

The development and use of highly automated vehicles (HAV) in agriculture is a highly important task because of the lack of machine drivers and unsatisfactory level of their qualifications, reducing the impact of harmful factors on employees of agricultural enterprises. HAVs allow to avoid these problems: increase productivity and the efficiency of seasonal use of equipment, and reduce the impact of harmful factors on people. Modern HAVs in agriculture are based on the following methods: parallel driving according to geo coordinates without automatic turning and without obstacles tracking, and on technical vision without the use of a geographic information system (for example Cognitive AgroPilot) and a digital field map, which makes it impossible to generate the optimal path around the field.

The high-speed railway operation environment monitoring network system has a wide variety of sensors and inconsistent business requirements, which have certain requirements for data transmission delay and network life. Most of the previous research focuses only on prolonging network lifetime or reducing data transmission delays when designing or optimizing routing protocols, without co-designing the two. In addition, due to the harsh operating environment of high-speed railways, when the network changes dynamically, the traditional routing algorithm will generate unnecessary redesigns and lead to high overhead. Based on the actual needs of high-speed railway operation environment monitoring, this paper proposes a novel Double Q-values adaptive model combined with the existing reinforcement learning method, which considers the energy balance of the network and real-time data transmission, and constructs energy saving and delay. The two-dimensional reward avoids the extra overhead of maintaining a global routing table while capturing network dynamics. In addition, the adaptive weight coefficient is used to ensure the adaptability of the model to each business of the high-speed railway operation environment monitoring system. Finally, simulations and performance evaluations are carried out and compared with previous studies.Finally, simulations and performance evaluations are carried out and compared with previous studies. The results show that the proposed routing algorithm successfully extends the network’s life cycle and gets good real-time data performance. It also saves energy and has fewer delays than the other three routing protocols in different situations.

We consider the problem of coordinating the charging of an entire fleet of electric vehicles (EV), using a model-free approach, i.e. purely data-driven reinforcement learning (RL). The objective of the RL-based control is to optimize charging actions, while fulfilling all EV charging constraints (e.g. timely completion of the charging). In particular, we focus on batch-mode learning and adopt fitted Q-iteration (FQI). A core component in FQI is approximating the Q-function using a regression technique, from which the policy is derived. Recently, a dueling neural networks architecture was proposed and shown to lead to better policy evaluation in the presence of many similar-valued actions, as applied in a computer game context. The main research contributions of the current paper are that (i)we develop a dueling neural networks approach for the setting of joint coordination of an entire EV fleet, and (ii)we evaluate its performance and compare it to an all-knowing benchmark and an FQI approach using EXTRA trees regression technique, a popular approach currently discussed in EV related works. We present a case study where RL agents are trained with an epsilon-greedy approach for different objectives, (a)cost minimization, and (b)maximization of self-consumption of local renewable energy sources. Our results indicate that RL agents achieve significant cost reductions (70--80%) compared to a business-as-usual scenario without smart charging. Comparing the dueling neural networks regression to EXTRA trees indicates that for our case study's EV fleet parameters and training scenario, the EXTRA trees-based agents achieve higher performance in terms of both lower costs (or higher self-consumption) and stronger robustness, i.e. less variation among trained agents. This suggests that adopting dueling neural networks in this EV setting is not particularly beneficial as opposed to the Atari game context from where this idea originated.

An active power dispatch method for a microgrid (MG) with multi-type loads, renewable energy sources (RESs) and distributed energy storage devices (DESDs) is the focus of this paper. The MG operates in a grid-connected model, and distributed power sources contribute to the service for load demands. The outputs of multiple DESDs are controlled to optimize the active power dispatch. Our goal with optimization is to reduce the economic cost under time-of-use (TOU) price, and to adjust the excessively high or low load rate of distributed transformers (DTs) caused by the peak-valley demand and load uncertainties. To simulate a practical environment, the stochastic characteristics of multi-type loads are formulated. The transition matrix of system state is provided. Then, a finite-horizon Markov decision process (FHMDP) model is established to describe the dispatch optimization problem. A learning-based technique is adopted to search the optimal joint control policy of multiple DESDs. Finally, simulation experiments are performed to validate the effectiveness of the proposed method, and the fuzzification analysis of the method is presented.

Aiming at the problem of hypersonic morphing vehicle avoiding no-fly zones and reaching the target, an improved predictor-corrector guidance method is proposed. Firstly, the aircraft motion model and the constraint model are established. Then, the basic algorithm is given, the Q-learning method is used to design the attack angle and sweep angle scheme to ensure that the aircraft can fly over the low-altitude zones. The B-spline curve is used to design the location of flight path points and the bank angle scheme is designed according to the predictor-corrector method, so that the aircraft can fly around to avoid high-altitude zones. Next, Monte Carlo reinforcement learning(MCRL) method is used to improve predictor-corrector method and Deep Neural Network(DNN) is used to fit reward function. The improved method can generate trajectory with better performance. Simulation results verify the effectiveness of the proposed algorithm.

In tunnel excavation with boring machines, the tunnel face is supported to avoid collapse and minimise settlement. This article proposes the use of reinforcement learning, specifically the Deep Q-Network algorithm, to predict the face support pressure. The approach is tested both analytically and numerically. By using the soil properties ahead of the tunnel face and the overburden depth as the input, the algorithm is capable of predicting the optimal tunnel face support pressure, adapting to changes in geological and geometrical conditions.

As modern systems are becoming more complex their control strategy cannot longer relay only on measurement information that usually comes from probes but also from mathematical models. Those systems models can lead to unbearable computation times due to their own complexity, turning the control process non-viable, which leads to the implementation of surrogate models that enable to achieve estimates within acceptable time to take decisions. A control trained with Deep Reinforcement Learning algorithm, using a Physics-Informed Neural Network to obtain the temperature map on the following time step, replaces the need of running Direct Numerical Simulations. On this work we considered an 1D heat conduction problem, which temperature distribution feeds a control system to activate a heat source aiming to obtain a constant, previously defined, temperature value. With this approach, control training becomes much faster without the need of performing numerical simulations or laboratory measurements, as well the control is taken based on Neural Network enabling its implementation on simple processors to edge computing.

Given the landscape of intricate and constantly evolving cyber threats, organizations demand refined strategies to deploy a Security Information and Event Management to support the management of a Cyber Security Operations Center. The dynamic nature of cyber threats complicates the efficient allocation of the location of network intrusion detection sensors, a critical component of a robust cybersecurity framework. Our research introduces an approach that integrates the precision of biomimetic optimization algorithms with the adaptability of Deep Q–Learning. By employing different biomimetic algorithms enhanced with deep learning, we aim to refine the deployment of sensors in network infrastructures, balancing the network security imperative against deployment costs. The results of computational tests demonstrate that the improved iterations leveraging Deep Q–Learning have outperformed their native counterparts. These findings underscore the importance of reinforcement learning, specifically through Deep Q–Learning, as a powerful tool to enhance the effectiveness of metaheuristics in addressing optimization challenges.

In this article, a new class of $q$-Hermite based unified Apostol type polynomials is introduced by means of generating function and series representation. Several important formulas and recurrence relations for these polynomials are derived via different generating methods. We also introduce $q$-analog of Stirling numbers of second kind of order $\nu$ by which we construct a relation including aforementioned polynomials.

In this paper, we investigate a new $q$-analogue of the higher order degenerate Changhee polynomials and numbers, which are called the Witt-type formula for the $q$-analogue of degenerate Changhee polynomials of order $r$. We can derive some new interesting identities related to the degenerate $(h,q)$-Changhee polynomials and numbers.

In this paper, we investigate a new $q$-analogue of the higher order degenerate Changhee polynomials and numbers, which are called the Witt-type formula for the $q$-analogue of degenerate Changhee polynomials of order $r$. We can derive some new interesting identities related to the degenerate $(h,q)$-Changhee polynomials and numbers.

In this paper, we study the p-adic integral representation on Z_p of q-Bernoulli numbers arising from two variable q-Bernstein polynomials and investigate some properties for the q-Bernoulli numbers. In addition, we give some new identities of q-Bernoulli numbers.

This article aims to identify the generating function of modi…ed Apostol type q-Bernoulli polynomials. With the aid of this generating function, some properties of modi…ed Apostol type q-Bernoulli polynomials are given. It is shown that aforementioned polynomials are q-Appell. Hence, we make use of these polynomials to have applications on q-Umbral calculus. From those applications, we derive some theorems in order to get Apostol type modi…ed q-Bernoulli polynomials as a linear combination of some known polynomials which we stated in the paper.

This article focuses on developing a continuous authentication system using behavioral biometrics to recognize users accessing computing devices. The user’s distinct behavioral biometric is captured through keystroke dynamics, and reward-based reinforcement learning (RL) ideas are applied to recognize them throughout the session. The suggested system adds an extra layer of security to traditional authentication methods, forming a robust continuous authentication system that can be added to static authentication systems. The methodology involves training a RL model to detect unusual user typing patterns and flag suspicious activity. Each user has an agent trained on their historical data, which is preprocessed and used to create episodes for the agent to learn from. The environment involves fetching observations and randomly corrupting them to learn out-of-order behavior. The observation vector includes both running features and summary features. The re-ward function is binary and minimalistic. The Principal Component Analysis (PCA) model is used to encode the running features, and the Double Deep Q-Network (DDQN) algorithm with a fully connected neural network is used as the policy net. The evaluation achieved an average training accuracy and EER (equal error rate) of 94.7% and 0.0126 and test accuracy and ERR of 81.06% and 0.0323 for all users when the number of encoder features was increased. Therefore, it is concluded that by continuously learning and adapting to changing behavior patterns, this approach can provide more secure and personalized authentication, lowering the possibility of unauthorized access and cyberattacks. Overall, the use of reinforcement learning and behavioral biometrics for continuous authentication has the potential to significantly enhance security in the digital age and are effective in identifying each user.

"Eureka" is a transformative platform designed to address the academic challenges faced by students by fostering an inclusive and collaborative learning environment. Through an online Q\&A discussion format, it facilitates knowledge sharing, coursework discussions, and peer support, thereby enhancing collaborative learning. Key features such as Q\&A, Answer Validation, and Leaderboard ensure efficient and reliable information exchange, motivating active student participation and mutual support. The platform's development using Agile methodologies has proven effective, emphasizing iterative development, constant user feedback, and collaborative efforts. This approach has significantly boosted student engagement and improved learning outcomes. "Eureka" not only aids in students' understanding of course material but also contributes to overall academic performance, serving as a powerful tool in creating a supportive academic environment. Its Agile-based development ensures ongoing responsiveness to student needs, enabling continuous improvement and a sustained positive impact on learning experiences.

The proliferation of mobile and IoT devices, coupled with the advances in the wireless communication capabilities of these devices, have urged the need for novel communication paradigms for such heterogeneous hybrid networks. Researchers have proposed opportunistic routing as a means to leverage the potentials offered by such heterogeneous networks. While several proposals for multiple opportunistic routing protocols exist, only a few have explored fuzzy logic to evaluate wireless links status in the network to construct stable and faster paths towards the destinations. We propose FQ-AGO, a novel Fuzzy Logic Q-learning Based Asymmetric Link Aware and Geographic Opportunistic Routing scheme that leverages the presence of long-range transmission links to assign forwarding candidates towards a given destination. The proposed routing scheme utilizes fuzzy logic to evaluate whether a wireless link is useful or not by capturing multiple network metrics, the available bandwidth, link quality, node transmission power, and distance progress. Based on the fuzzy logic evaluation, the proposed routing scheme employs a Q-learning algorithm to select the best candidate set toward the destination. We implement FQ-AGO on the NS-3 simulator and compare the performance of the proposed routing scheme with three other relevant protocols: AODV, DSDV, and GOR. For precise analysis, we consider various network metrics to compare the performance of the routing protocols. Our simulation result validates our analysis and demonstrates remarkable performance improvements in terms of total network throughput, packet delivery ration, and end-to-end delay.

This paper includes some new investigations and results for post quantum calculus, denoted by (p,q)-calculus. A chain rule for (p,q)-derivative is developed. Also, a new (p,q)-analogue of the exponential function is introduced and some its properties including the addition property for (p,q)-exponential functions are investigated. Several useful results involving (p,q)-binomial coefficients and (p,q)-antiderivative are discovered. At the final part of this paper, (p,q)-analogue of some elementary functions including trigonometric functions and hyperbolic functions are considered and some properties and relations among them are analyzed extensively.

In this paper, we consider the zero distributions of q-shift monomi-als and difference polynomials of meromorphic functions with zero order, that extends the classical Hayman results on the zeros of differential poly-nomials to q-shift difference polynomials. We also investigate problem of q-shift difference polynomials that share a common value.

The multi-stage, multi-level assembly job shop scheduling problem (MsMlAJSP) is commonly encountered in the manufacturing of complex customized products. Ensuring production efficiency while effectively improving energy utilization is a key focus in the industry. For the energy-efficient MsMlAJSP (EEMsMlAJSP), an improved imperialist competitive algorithm based on Q-learning (IICA-QL) is proposed to minimize the maximum completion time and total energy consumption. In IICA-QL, a decoding strategy with energy-efficient triggers based on problem characteristics is designed to ensure solution quality while effectively enhancing search efficiency. Additionally, an assimilation operation with operator parameter self-adaptation based on Q-learning is devised to overcome the challenge of balancing exploration and exploitation with fixed parameters, thus the convergence and diversity of the algorithmic search is enhanced. Finally, the effectiveness of the energy-efficient strategy decoding trigger mechanism and the operator parameter self-adaptation operation based on Q-learning is demonstrated through experimental results, and the effectiveness of IICA-QL for solving EEMsMlAJSP is verified by comparing with other algorithms.

Given the AdS/CFT relationship, the study of higher-dimensional AdS black holes is extremely important. Furthermore, since the restriction derived from $f(Q)$'s field equations which prevents it from deriving spherically symmetric black hole solutions, the result is either $Q'=0$ or $f_{QQ}=0$. We derive static anti-de-Sitter black holes in $D$-dimensions using the cylindrical coordinate in the framework of the cubic form of $f(Q)$ gravity, where the coincident gauge condition is imposed \cite{Heisenberg:2023lru,Maurya:2023muz}. Within this study we are going to use the power-law ansatz which is the most viable according to observations where $f(Q)=Q+\frac{1}2\gamma Q^2+\frac{1}3\gamma Q^3-2\Lambda$, and the condition $D \geq 4$ is satisfied. Since these solutions lack a general relativity limit, they belong to a brand-new solution class, the characteristics of which are derived only from the non-metricity $Q$ modification. We investigate the singularities of the solutions by computing the values of different curvature and non-metricity invariants. We discover that the solutions indeed have a central singularity, but because of the f(Q) impact, it is softer than in the typical general relativity case. In conclusion, we compute thermodynamic parameters such as Gibbs free energy, Hawking temperature, and entropy. These thermodynamic calculations confirm that our model is stable.

In this paper we introduce the hypo-q-norms on a Cartesian product of inner product spaces. A representation of these norms in terms of inner products, the equivalence with the q-norms on a Cartesian product and some reverse inequalities obtained via the scalar Shisha-Mond, Birnacki et al., Grüss type inequalities, Boas-Bellman and Bombieri type inequalities are also given.

The prim objective of commenced article is to determine q-sumudu transforms of a product of unified family of q-polynomials with basic (or q-) analogue of fox’s H-function and q-analog of I-functions. Specialized cases of the leading outcome are further evaluated as q-sumudu transform of general class of q-polynomials and q-sumudu transforms of the basic analogues of Fox’s H-function and I-functions.

This paper focuses on enhancing the object detection and decision-making capabilities of Autonomous Emergency Medical Response Systems (AEMRS). Using advanced sensors, Convolutional Neural Networks (CNN), and reinforcement learning, we propose a model that processes environmental data to identify obstacles and make optimal navigation decisions. The integration of these technologies aims to minimize response time and improve the efficiency of emergency medical services. The perception system utilizes radar, LiDAR, and camera inputs to create a comprehensive understanding of the environment. These data are processed through a series of CNN layers to detect and classify objects such as vehicles, pedestrians, and road signs. On the decision-making front, a Q-learning algorithm is employed to enable the ambulance to learn from its interactions with the environment, continuously improving its route planning and collision avoidance strategies. By combining these advanced AI techniques, the proposed AEMRS can significantly enhance the speed and reliability of emergency responses, ultimately saving more lives. This paper presents the design, implementation, and simulation results of the proposed system, demonstrating its potential to revolutionize emergency medical services.

In the heterogeneous wireless networked control system (WNCS), age of information (AoI) of the actuation update and actuation update cost are important performance metrics. To reduce the monetary cost, the control system can wait for the availability of WiFi network of the actuator and then conduct the update by using WiFi network in an opportunistic manner, but it leads to the increased AoI of the actuation update. To assess this problem, this paper proposes a priority-aware actuation update scheme (PAUS) where the control system decides whether to deliver or delay the actuation update to the actuator by considering the control priority (i.e., robustness of AoI of the actuation update). For the optimal decision, we formulate a Markov decision process model and derive the optimal policy based on Q-learning. Simulation results demonstrate that PAUS outperforms the comparison schemes in terms of the expected reward.

Here, we describe the bicomplex (p,q)- Fibonacci numbers and the bicomplex (p,q)- Fibonacci quaternions that are based on these numbers and give some of their equations, including the Binet formula, generating function, Catalan, Cassini, d’Ocagne’s identities, and some summation formulas for both of them. Finally, we create a matrix for bicomplex (p,q)- Fibonacci quaternions, and we obtain a determinant of a special matrix that gives the terms of that quaternion.

We construct a novel family of summation-integral type hybrid operators in terms of shape parameter $\alpha\in \lbrack 0,1]$ in this paper. Basic estimates, rate of convergence, and order of approximation are also studied using the Korovkin theorem and the modulus of smoothness. We investigate the local approximation findings for these sequences of positive linear operators utilising Peetre's K-functional, Lipschitz class, and second-order modulus of smoothness.

We propose a new statistical analysis of the Acoustic Emissions (AE) produced in a series of triaxial deformation experiments leading to fractures and failure of two different rocks, namely, Darley Dale Sandstone (DDS) and AG Granite (AG). By means of q-statistical formalism, we are able to characterize the pre-failure processes in both types of rocks. In particular, we study AE inter-event time and AE inter-event distance distributions. Both of them can be reproduced with q-exponential curves, showing universal features which are observed here for the first time and could be important in order to understand more in detail rock fractures dynamics.

In the present study, we introduce the two dimensional Chlodovsky type Bernstein operators based on (p,q)−integer. We examine approximation properties of our new operator by the help of Korovkin-type theorem. Further, we present the local approximation properties and establish the rates of convergence by means of the modulus of continuity and the Lipschitz type maximal function. Also, we give a Voronovskaja type theorem for this operators. And, we investigate weighted approximation properties of these operators and estimate rate of convergence in the same space. Finally, with the help of Maple, illustrative graphics show the rate of convergence of these operators to certain functions . The optimization of approximation speeds by operators during system control provides significant improvements in stability and performance. As a result, the control and modeling of dynamic systems become more efficient and effective through innovative methods. These advancements in the fields of modeling fractional differential equations and control theory offer substantial benefits to both modeling and optimization processes, expanding the range of applications in these areas.

In this paper, a new class of q-Hermite based Frobenius type Eulerian polynomials is introduced by means of generating function and series representation. Several fundamental formulas and recurrence relations for these polynomials are derived via different generating methods. Furthermore, diverse correlations including the q-Apostol-Bernoulli polynomials, the q-Apostol-Euler poynoomials, the q-Apostol-Genocchi polynomials and the q-Stirling numbers of the second kind are also established by means of the their generating functions.

The steep rise in reinforcement learning (RL) in various applications in energy as well as the penetration of home automation in recent years are the motivation for this article. It surveys the use of RL in various home energy management system (HEMS) applications. There is a focus on deep neural network (DNN) models in RL. The article provides an overview of reinforcement learning. This is followed with discussions on state-of-the-art methods for value, policy, and actor–critic methods in deep reinforcement learning (DRL). In order to make the published literature in reinforcement learning more accessible to the HEMS community, verbal descriptions are accompanied with explanatory figures as well as mathematical expressions using standard machine learning terminology. Next, a detailed survey of how reinforcement learning is used in different HEMS domains is described. The survey also considers what kind of reinforcement learning algorithms are used in each HEMS application. It suggests that research in this direction is still in its infancy. Lastly, the article proposes four performance metrics to evaluate RL methods.

The aim of the experiment was to investigate how induced stress can affect skin welfare of broodstock of lumpfish. From a population of approx. 300 fish of 1587 g (SEM ± 704 g), a sub-population of 20 fish were injected with 30 mg/kg fish cortisol implants 5 January 2018. The control group was not treated with implants. The stress-induced cortisol implant group showed elevated plasma cortisol over a period of approximately one month. Analyses of mucus cell area and density suggested that induced stress could produce a positive functional response (stimulus) in lumpfish early in the experiment, through a gentle increase in the barrier strength of the skin, and reduced mucus cell size and increased density of mucous cells, resulting in a strengthening of the respiratory capacity of the gills. Mucous cell density and calculated barrier strength in the skin were significantly negatively correlated with plasma cortisol, while in the gill filaments of females there was a significant negative correlation between mucous cell density and estrogen levels. The reduced volumetric density of "empty" cells (Q cells) after stress inducement indicates that these cells are important for the maintenance of homeostasis. The fish in this experiment were considered more robust compared to previous analyses on smaller lumpfish.

Coenzyme Q (CoQ) is a lipidic compound widely distributed in nature with crucial functions in metabolism, protection against oxidative damage and ferroptosis, and other processes. CoQ biosynthesis is a conserved and complex pathway involving several proteins. COQ2 is a member of the UbiA family of transmembrane prenyltransferases that catalyzes the condensation of the head and tail precursors of CoQ, a key step in the process because its product is the first intermediate that will be modified in the head by the next component of the synthesis process. Mutations in this protein have been linked to primary CoQ deficiency in humans, a rare disease predominantly affecting organs with a high energy demand. The reaction catalyzed by COQ2 and its mechanism are still unknown. Here we aimed at clarifying COQ2 reaction by exploring possible substrate binding sites using a strategy based on homology, comprising the identification of ligand-bound homologs with solved structures available in the Protein Data Bank (PDB) and their subsequent structural superposition to the AlphaFold predicted model for COQ2. The results highlight some residues located on the central cavity or the matrix loops that may be involved in substrate interaction, some of them mutated in primary CoQ deficiency patients. Furthermore, we analyze the structural modifications introduced by the pathogenic mutations found in humans. These findings shed new light on the understanding of COQ2 function and, thus, CoQ biosynthesis and pathogenicity of primary CoQ deficiency.

New q-series in the spirit of Jacobi have been found in a publication rst published in 1884 written in Russian and translated into English in 1928. This work was found by chance and appears to be almost totally unknown. From these entirely new q-series, fresh lattice sums have been discovered and are presented here.

For evaluating probabilities of arbitrary random events with respect to a given multivariate probability distribution, specific techniques are of great interest. An important two-dimensional high risk limit law is the Gauss-exponential distribution whose probabilities can be dealt with based upon the Gauss-Laplace law. The latter will be considered here as an element of the newly introduced family of (p,q)-spherical distributions. Based upon a suitably defined non-Euclidean arc-length measure on (p,q)-circles we prove geometric and stochastic representations of these distributions and correspondingly distributed random vectors, respectively. These representations allow dealing with the new probability measures similarly like with elliptically contoured distributions and more general homogeneous star-shaped ones. This is demonstrated at hand of a generalization of the Box-Muller simulation method. En passant, we prove an extension of the sector and circle number functions.

The present analysis deals with the study of the $f(Q, T )$ theory of gravity which was recently considered by many cosmologists. In this theory of gravity, the action is taken as an arbitrary function $f(Q, T )$ where $Q$ is non-metricity and $T$ is the trace of energy-momentum tensor for matter fluid. In this study, we have taken three different forms of the function $f(Q, T )$ as $f(Q,T)=a_1Q+a_2 T$ and $f(Q,T)=a_3 Q^2+a_4 T$ and discussed some physical properties of the same. Also, we have obtained the various cosmological parameters towards Friedmann-Lemaitre-Robertson-walker (FLRW) Universe by defining the transit form of scale factor which yields the Hubble parameter in redshift form as $H(z)=\frac{H_{0}}{(\lambda+1)} \left(\lambda+ (1+z)^{\delta}\right)$. %We have obtained the approx best-fit values of model parameters using the least square method for observational constraints on available datasets like Hubble dataset $H(z)$, Supernova dataset SNe-Ia, etc., by applying the Root Mean Squared Error formula (RMSE). By applying the Root Mean Squared Error formula (RMSE), we were able to determine the approximate best-fit values of model parameters using the least square approach for observational constraints on the datasets Hubble dataset $H(z)$, Supernova dataset SNe-Ia, etc. We have observed that the deceleration parameter $q(z)$ exhibits a signature-flipping (transition) point within the range $0.623 \le z_{0} \le 1.668$ through which it changes its phase from the decelerated to the accelerated expanding universe with $\omega = -1$ at $z=-1$ for the approximate best-fit values of the model parameters. %For obtained approx best-fit values of model parameters we have observed that the deceleration parameter $q(z)$ shows a signature-flipping (transition) point within the range $0.623 \le z_{0} \le 1.668$ through which it changes its phase from decelerated to the accelerated expanding universe with $\omega = -1$ at $z=-1$.

This study is aimed to assess the prevalence of Coxiella burnetii infection among veterinary medicine students from two Bulgarian Universities, located in Sofia and Stara Zagora. A total of 185 veterinary students blood samples were collected and tested for the detection of C. burnetii phase II antibodies and presence of DNA using an enzyme-linked immunosorbent assay (ELISA) and end-point PCR test, respectively. Out of all samples, 29.7% were positive for at least one C. burnetii phase II antibody marker or by PCR test. Veterinary students from Stara Zagora showed significantly seropositive status of Q fever (33.6%), then those who studied in Sofia (23%). The evidence for recent exposition with detection of anti-C. burnetii IgM (+) antibodies had 14.6%. Seroprevalence among students in Stara Zagora was higher (15.3%). Anti-C. burnetii phase II IgG antibodies were detected in 21.6% examined samples. Our study revealed a higher seropositivity among male students (32.8%) as compared to the female ones (16.0%). End-point PCR assay detected as positive 5.9% blood samples. The relative risk (RR) of Q fever exposure for male students was 40.7%, whereas for female (24.6%). Findings from this study indicated that the C. burnetii infection is widely distributed amongst veterinary students from Bulgaria. The study emphasizes the need for improved safety protocols and infection control measures in veterinary training programs.

Discussions and practices on sustainability are actively underway around the world. In this social context, this study conceptualized ESG management values ​​focused on sports organizations, especially professional sports clubs in Korea. Utilizing Q Methodology, suitable for research on individual's subjectivity, we explored ESG management values accepted by consumers of Korean professional sports. As a result, the ESG management values were confirmed as follows: ‘Type I: Trust-Management Emphasis,’ ‘Type II: Local-Community Emphasis,’ and ‘Type III: Safety-Respect Culture Emphasis.’ While each of the three types accepted governance, social responsibility, safety, and respect culture as their main values, they tended to deny environment-related values. Accordingly, this study provided two discussions: ‘Professional sports consumers’ low awareness of the environment’ and ‘Reinterpretation of environmental values ​​among the ESG management values ​​of professional sports clubs’. In conclusion, the three types are significant in that (1) they well reflect the social and cultural context of Korean professional sports and consumers' perceptions, and (2) they provide a new perspective on the ESG management value of professional sports teams.

Precipitation patterns are critical for understanding the hydrological and climatological dynamics of any region. Sicily, the largest island of the Mediterranean sea, with its diverse topography and climatic conditions, serves as an ideal case study for analyzing precipitation data to gain insights into regional water resources, agricultural productivity, and climate change impacts. This paper employs advanced statistical physics methods, particularly Tsallis q-statistics, to analyze sub-hourly precipitation data from 2002 to 2023, provided by the Sicilian Agrometeorological Informative System (SIAS). We investigate several critical variables related to rainfall events, including duration, depth, maximum record, and inter-event time. The study spans two decades (2002-2012 and 2013-2023), analyzing the distributions of relevant variables. Additionally, we examine the simple returns of these variables to identify significant temporal changes, fitting these returns with q-Gaussian distributions. Our findings reveal the scale-invariant nature of precipitation events, the presence of long-range interactions and memory effects, characteristic of complex environmental processes.

Dermal pigmentation is a challenging condition due to relative resistance to medical treatment and requirement of multiple sessions with modalities like chemical peels and lasers. There is inadequate literature regarding the efficacy and safety of lasers for dermal pigmentation in Indian skin. One hundred and twenty two patients were enrolled and divided into 4 groups: a) Dermal melasma b) Acquired dermal macular hyperpigmentation c) Nevus and d) Tattoo. Sequential combination of various lasers were used with different protocols for 4 different groups like ablative pixel Er:YAG, intense pulse light based technologies, Q-Switched and Alma Hybrid lasers for treatment of dermal pigmentation. A total of 4-10 sessions were conducted at three weekly intervals. Results were evaluated by comparing photographs at baseline, one month after the last session and then at 6 months interval to assess the relapse. All groups showed a statistically significant reduction in pigmentation. The mean treatment duration was 5-7 months for tattoo, lichen planus pigmentosus and melasma with 6-8 number of sessions. The mean treatment duration for nevus was 7-9 months with 8-10 sessions. Lasers are safe and effective modalities in Indian skin type for treatment of dermal pigmentation. Treatment period and relapse of dermal pigmentation may be reduced by combining resurfacing and chromophore selective lasers along with adequate dietary and lifestyle modifications to minimize complications and recurrence rates.

We establish certain modular equations of degree three based on some results of Ramanujan's theta functions.

In this paper, inspired by Jleli and Samet [journal of inequalities and applications 38 (2014) 2 1–8] we introduce two new classes of auxiliary functions and utilize the same to define (q, y)R-weak 3 contractions. Utilizing (q, y)R-weak contractions, we prove some fixed point theorems in the setting 4 of relational metric spaces. We employ some examples to substantiate the utility of our newly proved 5 results. Finally, we apply one of our newly proved results to ensure the existence and uniqueness of 6 solution of a Volterra-type integral equation.

In this paper we present experimental results concerning Acoustic Emission (AE) recorded during cyclic compression tests on two different kinds of brittle building materials, namely concrete and basalt. The AE inter-event times were investigated through a non-extensive statistical mechanics analysis which shows that their decumulative probability distributions follow q-exponential laws. The entropic index q and the relaxation parameter q  1=Tq, obtained by fitting the experimental data, exhibit systematic changes during the various stages of the failure process, namely (q; Tq) linearly align. The Tq = 0 point corresponds to the macroscopic breakdown of the material. The slope, including its sign, of the linear alignment appears to depend on the chemical and mechanical properties of the sample. These results provide an insight on the warning signs of the incipient failure of building materials and could therefore be used in monitoring the health of existing structures such as buildings and bridges.

The statistics of grain displacements probability distribution function (pdf) during the shear of a granular medium displays an unusual dependence with the shear increment upscaling as recently evinced [Phys. Rev. Lett. 115 238301 2015]. Basically, the pdf of grain displacements has clear nonextensive ($q$-Gaussian) features at small scales but approaches to Gaussian characteristics at large shear window scales -- the granulence effect. Here, we extend this analysis studying a larger system (more grains considered in the experimental setup) which exhibits a severe shear band fault during the macroscopic straining. We calculate the pdf of grain displacements and the dependency of the $q$-statistics with the shear increment. This analysis have shown a singular behavior of $q$ at large scales, displaying a non-monotonic dependence with the shear increment. By means of an independent image analysis, we demonstrate that this singular non-monotonicity could be associated with the emergence of a shear band within the confined system. We show that the exact point where the $q$-value inverts its tendency coincides with the emergence of a giant percolation cluster along the system, caused by the shear band. We believe that this original approach using Statistical Mechanics tools to identify shear bands can be a very useful piece to solve the complex puzzle of the rheology of dense granular systems.

In the present study, we introduce the two dimensional Chlodovsky type Bernstein operators based on (p, q)−integer. We examine approximation properties of our new operator by the help of Korovkin-type theorem. Further, we present the local approximation properties and establish the rates of convergence by means of the modulus of continuity and the Lipschitz type maximal function. Also, we give a Voronovskaja type theorem for this operators. And, we investigate weighted approximation properties of these operators and estimate rate of convergence in the same space. Finally, with the help of Maple, illustrative graphics show the rate of convergence of these operators to certain functions . The optimization of approximation speeds by operators during system control provides significant improvements in stability and performance. As a result, the control and modeling of dynamic systems become more efficient and effective through innovative methods. These advancements in the fields of modeling fractional differential equations and control theory offer substantial benefits to both modeling and optimization processes, expanding the range of applications in these areas.

The main goal of the present paper is to construct some families of the Carlitz’s q-Bernoulli polynomials and numbers. We firstly introduce the modified Carlitz’s q-Bernoulli polynomials and numbers with weight (α, β) and investigate their some explicit properties and identities arising from the bosonic q-Volkenborn integral on ℤ_p. We then define the modified degenerate Carlitz’s q-Bernoulli polynomials and numbers with weight (α, β) and obtain some recurrence relations and other identities. Moreover, we derive some correlations with the modified Carlitz’s q-Bernoulli polynomials with weight (α, β), the modified degenerate Carlitz’s q-Bernoulli polynomials with weight (α, β), the Stirling numbers of the first kind and second kind.

Almost two decades ago, Ernesto P. Borges and Bruce M. Boghosian embarked on the intricate task of composing a manuscript to honor the profound contributions of Constantino Tsallis to the realm of statistical physics, coupled with a concise exploration of q-Statistics. Fast forward to Constantino Tsallis’ illustrious 80th birthday celebration in 2023, where Deniz Eroglu and Ugur Tirnakli delved into Constantino’s collaborative network, injecting renewed vitality into the project. With hearts brimming with appreciation for Tsallis’ enduring inspiration, Eroglu, Boghosian, Borges and Tirnakli proudly present this meticulously crafted manuscript as a token of their gratitude.

This article deals with the queueing-inventory system, composed of c junior servers, a senior server, two finite waiting halls, and an infinite orbit. On occasion, junior servers encounter challenges during customer service. In these instances, they approach the senior server for guidance in resolving the issue. Suppose the senior server is engaged with another junior server. The approaching junior servers await their turn in a finite waiting area with a capacity of c for consultation. Concerning this, we study the performance of junior servers approaching the senior server in the retrial queueing-inventory model with the two finite waiting halls dedicated to the primary customers and the junior servers for consultation. We formulate a level-dependent QBD process and solve its steady-state probability vector using Neuts and Rao’s truncation method. The stability condition of the system is derived, and the R matrix is computed. Optimum total cost has been obtained, and sensitivity analyses, which include expected total cost, waiting time of customers in waiting hall and orbit, number of busy servers, and fraction of successful retrial rate of the model, are done numerically.

Tuning fork gyroscopes (TFGs) are promising for potential high-precision applications. This work proposes and experimentally demonstrates a novel high-Q dual mass tuning fork microelectro-mechanical system (MEMS) gyroscope utilizing three-dimensional (3D) packaging techniques. Except for two symmetrically-decoupled proof masses (PM) with synchronization structures, a symmetrically-decoupled lever structure is designed to force the antiparallel, antiphase drive-mode motion and basically eliminate the low-frequency spurious modes. The thermoelastic damping (TED) and anchor loss are greatly reduced by the linearly-coupled, momentum- and torque-balanced antiphase sense mode. Besides, a novel 3D packaging technique is used to realize high Q-factors. A composite substrate encapsulation cap, fabricated by through-silicon-via (TSV) and glass-in-silicon (GIS) reflow processes, is anodically bonded to the sensing structures at wafer scales. A self-developed control circuit is adopted to realize loop control and characterize gyro-scope performances. It is shown that a high-reliability electrical connection together with a high-air-impermeability package can be fulfilled with this 3D packaging technique. Furthermore, the Q-factors of the drive and sense modes reach up to 51947 and 49249, respectively. This TFG realizes a wide measurement range of ±1800° /s and a high resolution of 0.1° /s with a scale-factor nonlinearity 720 ppm after automatic mode-matching. Besides, the long-term zero-rate output (ZRO) drift can be effectively suppressed by temperature compensation, inducing a small angle random walk (ARW) of 0.923°/√h and a low bias instability (BI) of 9.270°/h.

Increasing the quality factor (Q) of an optical resonator device has been a research focus to be utilized in various applications. Higher Q-factor means light is confined in a longer time which will produce a shaper peak and higher transmission. In this paper, we introduce a novel technique to increase further the Q-factor of a one-dimensional photonic crystal (1D PhC) cavity device by using an end loop-mirror (ELM). The technique utilizes and recycles the light transmission from the conventional 1D PhC cavity design. The design has been proved to work by using the 2.5D FDTD simulation with Lumerical FDTD and MODE softwares. By using the ELM technique, the Q- factor of a 1D PhC design has been shown to have increased up to 79.53 % from the initial Q value without the ELM. This novel design technique can be combined with any high Q-factor and very high Q-factor designs to increase more the Q-factor value of a photonic crystal cavity devices or any other suitable optical resonator devices. The experimental result shows that the device is measurable by adding a Y-branch component to the one-port structure and able to get the high-Q result.

Coxiella burnetii (Derrick) Philip, the causative agent of Q fever, is mainly transmitted by aerosols, but ticks can also be a source of infection. Transstadial and transovarical transmission of C. burnetii by Hyalomma lusitanicum (Koch) has been suggested. There is a close relationship between this tick species, wild animals and C. burnetii but the transmission in a natural environment has not been demonstrated. In this study, we collected 80 engorged nymphs of H. lusitanicum from red deer and wild rabbits. They molt to adults under laboratory conditions and we feed them artificially through silicone membranes after a preconditioning period. C. burnetii DNA was tested in ticks, blood and feces samples using real-time PCR. The pathogen was found in 36.25% of fed adults demonstrating that transstadial transmission from nymph to adult occurs in nature. The presence of DNA in the 60% of blood samples confirms that adults transmit the bacteria during feeding. Further studied are needed about co-feeding and other possible transmission routes to define the role of this tick species in the cycle of C. burnetii.

Rickettsia and Coxiella burnetii are zoonotic tick-borne pathogens that can cause febrile illnesses with or without other symptoms in humans but may cause subclinical infections in animals. There are only a few reports on the occurrence of these pathogens in cattle and water buffaloes in Southeast Asia, including the Philippines. In this study, molecular detection of Rickettsia spp. and C. burnetii in the blood and Rhipicephalus (Boophilus) microplus ticks of cattle and water buffaloes from five provinces in Luzon Island of the Philippines was done. A total of 620 blood samples of cattle and water buffaloes and 206 tick samples were collected and subjected to DNA extraction. After successful amplification of control genes, nested PCR was performed to detect gltA of Rickettsia and com1 of C. burnetii. No samples were positive for Rickettsia while 10 (cattle – 7, water buffaloes - 3) or 1.6% of blood and 5 or 1.8% of tick samples were C. burnetii-positive. Sequence analysis of the positive amplicons showed 99-100% similarity to reported C. burnetii isolates. This molecular evidence on the occurrence of C. burnetii in Philippine ruminants and cattle ticks and its zoonotic nature should prompt further investigation and surveillance to facilitate its effective control.

Rapidly changing dynamics of globalization and increasing market competition are causing the companies all around the world confronting several new challenges and opportunities. To be competitive and successful apart from relative importance of physical resources, companies must adapt modern strategies and policies regarding market flexibility and development. The purpose of this study is to empirically investigate the relationship between intellectual capital and firm value. Furthermore, the moderating role of managerial ownership has been evaluated with the help of regression analysis. The sample included the panel data taken from non-financial firms listed on Pakistan stock exchange (PSX) covering the period 2010-2015. A sample of 79 firms out of 384 firms have been selected with the help of systematic sampling technique. VAIC (Value Added Intellectual Coefficient) model has been used for the calculation of intellectual capital. Tobin's Q has been taken as a measure of firm value. Managerial ownership has been tested as moderator. Based on data analysis, it is concluded that the relationship between intellectual capital and firm value is positively significant. It is also concluded that managerial ownership moderates the relationship between intellectual capital and firm value negatively.

In this paper, we revisit the q-states clock model for small systems. We present results for the thermodynamics of the q-states clock model from $q=2$ to $q=20$ for small square lattices $L \times L$, with L ranging from $L=3$ to $L=64$ with free-boundary conditions. Energy, specific heat, entropy and magnetization are measured. We found that the Berezinskii-Kosterlitz-Thouless (BKT)-like transition appears for $q>5$ regardless of lattice size, while the transition at $q=5$ is lost for $L<10$; for $q\leq 4$ the BKT transition is never present. We report the phase diagram in terms of $q$ showing the transition from the ferromagnetic (FM) to the paramagnetic (PM) phases at a critical temperature T$_1$ for small systems which turns into a transition from the FM to the BKT phase for larger systems, while a second phase transition between the BKT and the PM phases occurs at T$_2$. We also show that the magnetic phases are well characterized by the two dimensional (2D) distribution of the magnetization values. We make use of this opportunity to do an information theory analysis of the time series obtained from the Monte Carlo simulations. In particular, we calculate the phenomenological mutability and diversity functions. Diversity characterizes the phase transitions, but the phases are less detectable as $q$ increases. Free boundary conditions are used to better mimic the reality of small systems (far from any thermodynamic limit). The role of size is discussed.

By utilizing a generalized version of the Madelung quantum-hydrodynamic framework that incorporates noise, we derive a solution using the path integral method to investigate how a quantum superposition of states evolves over time. This exploration seeks to comprehend the process through which a stable quantum state ultimately emerges in the presence of fluctuations induced by the noisy gravitational background. The model defines the conditions that give rise to a limited range of interaction for the quantum potential, allowing for the existence of coarse-grained classical descriptions at a macroscopic level. The theory uncovers the smallest attainable level of uncertainty in an open quantum system and examines its consistency with the localized behavior observed in large-scale classical systems. The research delves into connections and similarities with decoherence theory and the Copenhagen interpretation of quantum mechanics. Additionally, it assesses the potential consequences of wave function decay on the measurement of photon entanglement. To validate the proposed theory, an experiment involving entangled photons transmitted between detectors on the Moon and Mars is discussed. Finally, the findings of the theory are applied to the creation of larger Q-bits systems at elevated temperatures.

β-Ga2O3 crystal have attracted great attentions in the fields of photonics and photoelectronics because of its ultra wide-band gap and high thermal conductivity. Here, pure β-Ga2O3 crystal was successfully grown by optical floating zone (OFZ) method, and used as saturable absorbers to realize a passively Q-switched all-solid-state 1μm laser for the first time. By placing the as-grown β-Ga2O3 crystal into the resonator of Nd:GYAP solid-state laser, a Q-switched pulses at the center wavelength of 1080.4 nm are generated under a output coupling of 10%. The maximum output power is 191.5 mW while the shortest pulse width is 606.54 ns, and the maximum repetition frequency is 344.06 kHz. The maximum pulse energy and peak power are 0.567 μJ and 0.93 W, respectively. Our experimental results show that β-Ga2O3 crystal has great potential in the development of all-solid-state 1μm pulsed laser.

Beyond the usual ferromagnetic and paramagnetic phases present in spin systems, the usual q-state clock model, presents an intermediate vortex state when the number of possible orientations q for the system is equal to 5 or larger. Such vortex states give rise to the Berezinskii-Kosterlitz-Thouless (BKT) phase present up to the XY model in the limit q→∞. Based on information theory, we present here an analysis of the classical order parameters plus new short-range parameters defined here. Thus, we show that even using the first nearest neighbors spin-spin correlations only, it is possible to distinguish the two transitions presented by this system for q greater than or equal to 5. Moreover, the appearance at relatively low temperature and disappearance of the BKT phase at a rather fix higher temperature is univocally determined by the short-range interactions recognized by the information content of classical and new parameters.

Many corporations have now revised their value statements to showcase their commitment to sustainable development and green business due to the pressing issues of climate and environmental damage. Despite the importance of value statements that can direct companies to achieve sustainable goals, what kind of values can be perceived as organizational orientations to sustainability remains unknown. This study explores how the general public views the inclusion of sustainable components in value statements from the listed companies in Hong Kong by using Q-sort methodology (n = 30). Analyzing the final sample of 40 value statements extracted from 27 listed companies, we identified three factors related to sustainability, namely, Empowering business process management, Empowering customer-centric excellence, and Empowering sustainable progress. This study provides an additional component to the traditional triple bottom line by suggesting that internal operation of a company is an emerging idea to understand corporate sustainability.

Lifestyle interventions halt the progression of prediabetes to frank type 2 diabetes (T2D). However, the feasibility of a diabetes prevention program promoting tailored interventions on a national scale and conducted by primary care physicians is unclear. To explore this issue, general practitioners dislocated in ten different regions throughout Italy enrolled random subjects without known metabolic diseases to identify individuals with prediabetes and prescribe them an intervention based on physical activity. Using a simple stepwise approach, people referring to their primary care physician for any reason were screened for their diabetes risk with a web-based app of the Findrisc questionnaire. Those at risk for T2D, i.e. with a Findrisc score > 9, were invited to come back after overnight fasting to measure fasting glycaemia (FG). Those with 100 ≤ FG < 126 mg/dL were considered as people with prediabetes and compiled the Physical Activity Readiness Questionnaire (PAR-Q) to then receive a personalized prescription of physical activity. Overall, 5928 people were enrolled and compiled the questionnaire. Of these, 2895 (48.8 %) were at risk for T2D. Among these, FG was measured in 2168 subjects (participation rate 75%). The numbers of individuals with undetected prediabetes and T2D according to FG were 755 and 79 (34.8% and 3.6% of those assessing FG), respectively. Of the 755 subjects in the prediabetes range, 739 compiled the PAR-Q and started a personalized program of physical activity (participation rate 97%). Physicians involved in the study reported a mean of 6 minutes to perform the screening. Overall, these data suggest the feasibility of a national diabetes prevention program developed by general practitioners using a simple stepwise approach starting from a web-app to intercept individuals with prediabetes.

We present atomic structures and nonequilbrium synthesis of new class of materials, where the basic structural unit is a diamond tetrahedron. When units of one, two, and three tetrahedra are randomly packed, we create distinct phases of amorphous Q-carbon. Four tetrahedra in two adjacent layers lead to crystalline diamond lattice, which has four missing tetrahedra alternately. When these four missing tetrahedra are filled, we create subunit cell of crystalline Q-diamond. Theoretical calculations show that superconducting transition temperature (Tc) in 50 atomic % B-doped Q-diamond can reach near room temperature at ambient pressures. This is consistent with our earlier results using low-loss EELS measurements in 50 atomic % B-doped Q-carbon, which had mostly amorphous QB3 phase mixed with some crystalline Q-diamond phase. These EELS results showed that the Tc for these samples was in between 90K and 300K. Theoretical calculations of density of states, Eliashberg function, electron-phonon interaction parameter, and root-mean-square and logarithmic average of frequency in crystalline Q-diamond show Tc in the range of 268K to 300K, which is in a complete agreement with our EELS results in QB3.

To verify the concept of the metasurfaced reverberation chamber (MRC) which was proposed. This paper reports on measurements in the reverberation chamber (RC) performance by using a 1-bit random coding metasurfaced stirrer. The measurement results are validated and compared with that from two mechanical stirrers (horizontal stirrer and vertical stirrer). Figures of merit such as quality factor (Q factor), number of samples, standard deviation, angle autocorrelation, average K-factor, total scattering cross section (TSCS) and the enhanced back scattering coefficient (eb) are presented. Results indicate the feasibility of the MRC technique in the operation frequency of the RC. And it is possible to enlarge the test volume of the RC by using the 1-bit random coding metasurface stirrer.

Black ginseng is a type of processed ginseng that is traditionally used as herbal medicine in East Asian countries. It is prepared from fresh, white, or red ginseng by undergoing a process of steaming and drying nine times. However, the chemical differentiation of black ginseng with different processing levels is not well understood. The aim of this study is to propose a new method for discriminating and quantifying black ginseng. Six ginsenosides from black ginseng were accurately quantified, and based on this, the black ginseng samples were divided into uncompleted and completed black ginseng. Ultra-high-performance liquid chromatography-quadrupole-time of flight/mass spectrometry (UPLC-Q-TOF/MS) combined with a multivariate statistical analysis strategy was then employed to differentiate the two groups. A total of 141 ions were selected as analytical markers of black ginseng, with 45 of these markers being annotated by matching precise m/z and MS/MS data from prior studies.

Background: This literature review investigates qualitative and quantitative uses of indocyanine green (ICG) in surgical treatment, as this novel technique has become increasingly popular in ORs (operating rooms) worldwide due to its many advantages. Method: An extensive literature review was performed by searching for relevant terms in 5 international databases (www.pubmed.gov, www.sciencedirect.com, www.scopus.com, www.Oxfordjournals.com, www.reaxys.com). The results of this search were summarized into the main advantages of employing ICG in colorectal surgery as follows: a) intraoperative fluorescence angiography capability; b) fluorescence-guided identification of lymph node involvement in colorectal cancer and the sentinel lymph node method; c) positive fluorescence flagging of a liver tumour as small as "only" 200 tumour cells; d) facilitation of fistula diagnosis; and e) tumour tattooing. Moreover, in addition to qualitative intraoperative ICG use, this technique can be combined with quantitative methods and parameters, such as maximum intensity, relative maximum intensity, and different inflow parameters (time-to-peak, slope, and t1/2max). The conclusion of this article is that fluorescence surgery with ICG aided by near-infrared (NIR) light is a relatively recent technology, an advantage of which is improving the specific anatomic and functional information provided, thus allowing more comprehensive and safer tumour removal as well as preservation of important structures.

In this paper, the stabilization and high efficiency of an unstable Second Harmonic Generation (SHG) of a Nd : YVO4 laser with a KTP intracavity is carried out by using a passive Q-switching crystal and a parametric modulation method (harmonic modulation) is shown. The harmonic modulation was defined as um(t) = Amsin(2π fmt), with modulation amplitude as Am(Vpp), and modulation frequency as fm(Hz), applied to the pumping of the Nd : YVO4 -KTP laser to control the amplitude and frequency of the emission, thus stabilizing the dynamic states of this laser. The promising application of this green light source is materialized when such light is necessary for high-density optics, such as in the treatment materials industry or in some aesthetic applications.

Fatty acids and glucose are the main bioenergetic substrates in mammals that are alternatively used during the transition between fasting and feeding. Impairment of mitochondrial fatty acid oxidation causes mitochondrial myopathy leading to decreased physical performance. Here, we report that haploinsufficiency of ADCK2, a member of the aarF domain-containing mitochondrial protein kinase family, in human is associated with liver dysfunction and severe mitochondrial myopathy with lipid droplets in skeletal muscle. In order to better understand the etiology of this rare disorder, we generated a heterozygous Adck2 knockout mouse model to perform in vivo and cellular studies using integrated analysis of physiological and omics data (transcriptomics-metabolomics). The data show that Aldh2+/- mice exhibits impaired fatty acid oxidation, liver dysfunction, and mitochondrial myopathy in skeletal muscle resulting in lower physical performance. Significant decrease in CoQ biosynthesis was observed and supplementation with CoQ partially rescued the phenotype both in the human subject and mouse model. These results indicate that ADCK2 is involved in organismal fatty acid metabolism and in CoQ biosynthesis in skeletal muscle. We propose that patients with isolated myopathies and myopathies involving lipid accumulation be tested for possible ADCK2 defect as they are likely to be responsive to CoQ supplementation.

Global financial investments in energy production and consumption are significant since all aspects of a country's economic activity, and development require energy resources. In this paper, we assess the investment trends in the global energy sector during, before and after financial crises of 2008 using two data sources: (1) Dealogic database providing cross‐border mergers and acquisitions (M&As), and (2) fDi Intelligence fDi Markets database providing greenfield (GF) foreign direct investments (FDIs). We highlight the changing role of China and compare its M&A and GF FDI activities to those of the United States, Germany, UK, Japan and others during this period. We analyze the investments along each segment of the energy supply chain of these countries to highlight the geographical origin and destination, sectoral distribution, and cross‐border M&As and GF FDI activities. Our paper shows that while energy accounts for nearly 25% of all GF FDI, it only accounts for 4.82% of total M&A FDI activity in the period 1996-2016. China's outbound FDI in the energy sector started its ascent around the time of the global recession and had accelerated in the post-recession phase. In the energy sector, the development of China's outbound cross‐border M&As is similar to USA or UK, located mostly in the developed countries in the west, while their outbound GF investments are spread across many countries around the world. Also, China's outbound energy M&As are concentrated in certain segments (extraction, and electricity generation) while their GF covers all segments of the energy supply chain.

In this paper, we introduce a new generalization of the Hermite polynomials via (p, q)-exponential generating function and investigate several properties and relations for mentioned polynomials including derivative property, explicit formula, recurrence relation, integral representation. We also de…ne a (p, q)-analogue of the Bernstein polynomials and acquire their some formulas. We then provide some (p, q)-hyperbolic representations of the (p, q)-Bernstein polynomials. In addition, we obtain a correlation between (p, q)-Hermite polynomials and (p, q)-Bernstein polynomials.

This paper aims to demonstrate that, beyond the small world of Riemann-Liouville and Caputo derivatives, there is a vast and rich world with many derivatives suitable for specific problems and various theoretical frameworks to develop, corresponding to the different paths taken. Notions of time and scale sequences are introduced and general associated basic derivatives, namely right/stretching and left/shrinking, are defined. A general framework for fractional derivative definitions is reviewed and applied to get both known and new fractional order derivatives. Several fractional derivatives are considered, mainly: Liouville, Hadamard, Euler, bilinear, tempered, q-derivative, and Hahn.

Self-administered pre-participation screening for physical activity (PA) requires an instrument that should be easily used and identify individuals at high risk. The Physical Activity Readiness Questionnaire (PAR-Q+) has been used for many years. Its ease of use and ability to identify those not fit to undergo PA has not been assessed. This study was to determine the rates of the PAR-Q+ in identifying adults who may not be fit for moderate or intense PA and obtain feedback on the use of this tool. A public on-line voluntary survey on the PAR-Q+ was carried out obtaining participants’ bio-characteristics, them completing the PAR-Q+ form and providing feedback. With 1019 participants, about 57.8% engaged in at least 150 minutes of PA weekly. This decreased with increasing number of co-morbidities. Increasing age was associated with more co-morbidities. About 33.1% of the participants using the PARQ+ would have required further medical evaluation. Only 3 of the 7 main PAR-Q+ questions were easily understood. Difficulties were encountered with 39 of the 44 follow-up questions, especially amongst those with co-morbidities. The large number of technical terms was also a source of concern. The PAR-Q+ would need extensive simplification before it may be recommended for use.

We investigate a singularly perturbed q-difference differential Cauchy problem with polynomial coefficients in complex time and space with quadratic nonlinearity. We construct local holomorphic solutions on sectors in the complex plane with respect to the perturbation parameter with values in some Banach space of formal power series in space with analytic coefficients on shrinking domains in time. Two aspects of these solutions are addressed. One feature concerns asymptotic expansions in the parameter for which a Gevrey type structure is unveiled. The other fact deals with confluence properties as q tends to 1. In particular the built up Banach valued solutions are shown to merge in norm to a fully bounded holomorphic map in all its arguments that solves a nonlinear partial differential Cauchy problem.

Price markups and firm Tobin’s Q ratios are widely believed to have been increasing in the past several decades. Various models for the calculation of price markups have been developed, but each have methodological drawbacks and some results are poorly reflective of the near past wider macroeconomic experience. This paper defines an approach for the definition and measurement of markup pricing using the measure of Economic Rent and The Capital Asset Pricing Model. The results show limited markup pricing for The UK’s FTSE 100 companies (2018-2023), but that that certain Real Estate, Technology/Media and Financial Services/Equity Investment firms have enjoyed higher price markup levels. An analysis of the business models of these firms is used to qualitatively propose explanations for such markups. Finally, this work offers a formal proof that that expected price markup is equal to Tobin’s Q and finds that the empiric market level of markup is near equivalent to the market Tobin’s Q; differences between the markup and Tobin’s Q at the level of the firm are equally assessed.

Intermediate CAG expansions in the gene ataxin-2 (ATXN2) are a known risk factor for ALS, but little is known about their role in FTD risk. Moreover, their contribution to the risk and phenotype of patients might vary in populations with different genetic background. The aim of this study was to assess the relationship of intermediate CAG expansions in ATXN2 with the risk and phenotype of ALS and FTD in the Spanish population. Repeat-Primed PCR was performed in 620 ALS and 137 FTD patients in three referral centers of Spain to determine the exact number of CAG repeats. In our cohort, ≥27 CAG repeats in ATXN2 was associated with a higher risk of developing ALS (odds ratio [OR] = 2.666 [1.471-4.882]; p = 0.0013), but not FTD (odds ratio [OR] = 1.446 [0.558-3.574]; p = 0.44). Moreover, ALS patients with ≥27 CAG repeats in ATXN2 showed shorter survival rate compared to those with &lt;27 repeats (hazard ratio [HR] 1.74 [1.18, 2.56], p = 0.005), more frequent limb onset (odds ratio [OR] = 2.34 [1.093-4.936]; p = 0.028), as well as family history of ALS (odds ratio [OR] = 2.538 [1.375-4.634]; p = 0.002). Intermediate CAG expansions of ≥27 repeats in ATXN2 are associated with ALS risk, but not with FTD, in the Spanish population. ALS patients carrying an intermediate expansion in ATXN2 show more frequent limb onset, but worse prognosis than those without expansions. In patients carrying C9orf72 expansions, the intermediate ATXN2 expansion might increase the penetrance and modify the phenotype.

The asymptotic behavior of the analytic solutions of a family of singularly perturbed q-difference-differential equations in the complex domain is studied. Different asymptotic expansions with respect to the perturbation parameter and to the time variable are provided: one of Gevrey nature, and another of mixed type Gevrey and q-Gevrey. This asymptotic phenomena is observed due to the modification of the norm established on the space of coefficients of the formal solution. The techniques used are based on the adequate path deformation of the difference of two analytic solutions, and the application of several versions of Ramis-Sibuya theorem.

Limited availability of expensive alloying elements elevates low-alloyed steels to a unique position in the field of lightweight construction and mass production. Quenching and partitioning (Q&P) heat treatments of low-alloyed steels with exceptional property combinations are particularly promising. In this study, we characterize for the first time a new low-alloyed steel to be processed by Q&P heat treatments. In combined experimental and numerical studies, we design a novel approach that effectively combines the short cycle times of press hardening with the excellent property profiles of Q&P-treated steels. We identify appropriate transformation parameters for Q&P heat treatments by dilatometric studies and we adjust a number of reference conditions with different isothermal holding times. By means of SEM analysis and XRD measurements, we show that different fractions of retained austenite result in different mechanical properties. Initial numerical designs of the process can identify varying temperature profiles and cooling rates depending on the position in the die. The results show that the geometry of the part plays a minor role, but the die temperature is the dominant factor for successful partitioning directly in the press hardening process.

We examine a family of nonlinear q-difference-differential Cauchy problems obtained as a coupling of linear Cauchy problems containing dilation q-difference operators, recently investigated by the author, and quasi-linear Kowalevski type problems that involve contraction q-difference operators. We build up local holomorphic solutions to these problems. Two aspects of these solutions are explored. One facet deals with asymptotic expansions in the complex time variable for which a mixed type Gevrey and q-Gevrey structure is exhibited. The other feature concerns the problem of confluence of these solutions as q tends to 1.

Rhenium Disulfide (ReS2) has evolved as a novel 2D transition-metal dichalcogenide (TMD) material which has promising applications in optoelectronics and photonics because of its distinctive anisotropic attributes. In this review, we emphasize on formulating saturable absorbers (SAs) based on ReS2 to produce Q-switched and mode-locked pulsed lasers of diverse operation wavelengths like 1 μm, 1.5 μm, 2 μm, and 3 μm. We outline ReS2 synthesis techniques and integration platforms concerning solid-state and fiber-type lasers. We discuss the laser performance based on SAs attributes. Lastly, we draw conclusions and outlook by recommending additional improvements for SA devices so as to advance the domain of ultrafast photonic technology.

A linear Cauchy problem with polynomial coefficients wich combines q-difference operators for q>1 and differential operators of irregular type is examined. A finite set of sectorial holomorphic solutions w.r.t the complex time is constructed by means of classical Laplace transforms. These functions share a common asymptotic expansion in the time variable which turns out to carry a double layers structure which couples q-Gevrey and Gevrey bounds. In the last part of the work, the problem of confluence of these solutions as q tends to 1 is investigated.

In this paper, by using the q-integer, we introduce a new generalization of Fibonacci and Lucas sedenions called q-Fibonacci and q-Lucas sedenions. We present some fundamental properties of these type of sedenions such as Binet formulas, exponential generating fuctions, summation formulas, Catalan's identity, Cassini's identity and d'Ocagne's identity.

Background/Objectives: Thoracic aortic aneurysms (TAA) represent medical conditions having causes that can range from genetic determinations to various risk factors, having potential life-threatening complications, the familial TAA (FTAA) being a cluster of non-syndromic thoracic aortic aneurysms. This review aims to emphasize the importance of genetic testing in patients diagnosed with thoracic aortic aneurysms, the genetic implications accounting for roughly 20% of these cases. The reported case presents a patient who was genetically tested 10 years after a Bentall procedure, which was performed for acute DeBakey type I aortic dissection developed in her second pregnancy, when the patient started presenting recurrent prolonged febrile syndrome. She was tested positive for a missense variant in the actin alpha-2 (ACTA2) gene, in heterozygous status, but also serological tests revealed the presence of an infection with Coxiella burnetii. Methods: For a better understanding of both conditions, our research was conducted on two directions, one reviewing the literature on patients with Coxiella burnetii blood culture-negative infective endocarditis (BCNIE) and the other one, focusing on patients having familial thoracic aortic aneurysm (FTAA) due to ACTA2 mutation. This review incorporates studies found on PubMed and ResearchGate up to August 2024. Conclusions: BCNIE represents a condition with several diagnosis challenges and may lead to severe complications if timely treatment is not initiated. Also, diagnosing FTAA requires more frequent genetic testing, enabling a better follow-up and management.

In this study, the microbial community during the barley yeast fermentation of stevia leaves and its correlation with antioxidant, antiobesity, and anti-inflammatory properties, as well as metabolites, were investigated using UPLC-Q-TOF-MS. Stevia was fermented using commercial TSB media (TSB 1, TSB 2, and TSB 3) and sucrose (Sucrose 1, Sucrose 3, and Sucrose 3) for 1, 3, and 5 days, respectively. Stevia ferments showed higher DPPH and ABTS radical scavenging capacity compared to samples incubated with sucrose for 5 days, and all six ferments inhibited nitric oxide production in a concentration-dependent manner in LPS-induced mouse macrophages. Furthermore, UPLC-QTOF-MS analysis identified 23 related substances, including 10 terpenoids, including rubusoside, steviolbioside, and rebadioside derivatives; dulcoside A; and phlomisoside II, which are indicators of stevia, as well as five flavonoids, four phenolic acids, and four fatty acids. We also identified the microbial community during fermentation via the next-generation sequencing of the 16S rRNA gene for bacteria and the internal transcribed spacer (ITS) gene for fungi. The results showed that TSB 1 and Sucrose 1 ferments were dominated by the pathogens Enterococcus hirae (58.93%) and Cronobacter sakazakii (80.92%), while samples fermented for more than 3 days were pathogen-free and dominated by lactic acid bacteria such as Pediococcus stilesii (73.37%). Microbial community analysis using the ITS region showed that Saccharomycopsis fibuligera, classified as a yeast rather than a mold, dominated the stevia fermentation regardless of the fermentation duration. In particular, the microbial community of the fermentation with a sugar solution was dominated by S. fibuligera by more than 99% throughout the fermentation periods of 1, 3, and 5 days. Finally, to apply the stevia ferments topically to human skin, skin irritation tests were performed on 30 volunteers. The results showed that the highly concentrated extracts (1 mg/mL) of all six stevia ferments were hypoallergenic. Taken together, these findings suggest that brewer's yeast fermented from stevia leaves with a sugar solution offers promise as a natural ingredient for use in functional foods and cosmetics.

This article deals with a finite-source stock-dependent stochastic inventory system with heterogeneous servers and retrial facility. The system can store up to S number of items, and the lifetime of each item follows an exponential distribution. The primary customers arrive in a finite waiting hall from a finite source and get service from the multi-channel (c-heterogeneous servers). The customer’s arrival rate depends on the present stock level. Those customers who arrive while the waiting hall is full enter into the finite orbit. Also, customers in the waiting hall can become impatient and enter the orbit. The (s,Q) ordering policy is adopted for the replenishment of stocks. In the steady state, the joint probability distribution of a number of items in the inventory, busy servers, customers in the waiting hall, and orbit is computed. The comparative numerical analysis of heterogeneous and homogeneous servers on the expected total cost, the average number of customers in the waiting hall and orbit, the fraction of successful retrial rate, and the average impatient customer rate are also carried out.

A family of singularly perturbed q-difference-differential equations under the action of a small complex perturbation parameter is studied. The action of the formal monodromy around the origin is present in the equation, which suggests the construction of holomorphic solutions holding logarithmic terms in both, the formal and the analytic level. We provide both solutions and describe the asymptotic behavior relating them by means of q-gevrey asymptotic expansions of some positive order, with respect to the perturbation parameter. On the way, the development of a space product of Banach spaces in the Borel plane is needed to provide a fixed point for a coupled system of equations.

Propolis was widely used in health preservation and disease healing, it contains many ingredients. The previous study had been revealed that the propolis has a wide range of efficacy, such as antiviral, immune enhancement, anti-inflammatory and so on, but its antiviral components and underlying mechanism of action remain unknown. In this study, we investigated the chemical composition, and anti-PPV and immunological enhancement of Propolis Flavonoid(PF). Chemical composition of PF was distinguished by UPLC-Q/TOF-MS/MS analysis.The presence and characterized of 26 major components was distinguished in negative ionization modes.To evaluate the effects of PF used as adjuvant on the immune response porcine parvovirus (PPV). Thirty Landrace-Yorkshire hybrid sows were randomly assigned to 3 groups, and the sows in adjuvant groups were intramuscular injected PPV vaccine with 2.0 mL PF adjuvant (PA), oilemulsion adjuvant (OA), respectively. After that, serum hemagglutination inhibition antibody titers, IgM and IgG subclasses, eripheral lymphocyte proliferation activity, and concentrations of cytokines were measured. Results indicated an enhancing effect of PA on IgM, IL-2, IL-4, IFN-γ and the IgG subclass responses. These findings suggested that PA could significantly enhance the immune responses. Furthermore, we screened the chemical components the effective of anti-PPV, Ferulic acid have an excellently anti-PPV effective.

No study has focused on Uvaria macrophylla leaves with various traditional efficiencies. This paper therefore applied a database-affinity ultra-high-performance liquid chromatography with quadrupole orbitrap tandem mass spectrometry (UHPLC‑Q‑Orbitrap‑MS/MS) strategy, to analyze the lyophilized aqueous extract of U. macrophylla leaves. Through database comparison and MS fragment elucidation, the study has putatively identified 41 constituents belonging to flavonoid, phenolic acid, steroid, saccharide natural product classifications. Significantly, 4 groups of isomers (liquiritigenin vs isoliquiritigenin vs pinocembrin; oroxylin A vs wogonin vs galangin 3-methyl ether; isoquercitrin vs hyperoside; protocatechuic acid vs 2,5-dihydroxybenzoic acid) have been successfully distinguished from each other. All of 41 constituents were then subjected to a quantitative analysis based on linear regression equation established by the above UHPLC‑Q‑Orbitrap‑MS/MS strategy, and an ABTS+•-scavenging antioxidant assay. Finally, the chemical content was multiplied by the corresponding ABTS+•-scavenging percentage to calculate the antioxidant contribution. It was shown that the chemical contents of 41 constituents varied from 0.003 ± 0.000 to 14.418 ± 1.041 mg/g, and gallic acid showed the highest antioxidant contribution. Gallic acid is considered as a suitable antioxidant quality-marker (Q-marker) of U. macrophylla leaves. These findings have scientific implications for resource development and quality-control of U. macrophylla leaves.

In this study, the microbial strain was isolated from the humus soil to ferment Sophora flavescens and Eleutherococcus sessiliflorus extracts. The isolated microbial was identified as Bacillus genus by 16S rRNA sequence analysis. The fermented plant extracts exhibited the antifungal effects against four types of the plant pathogens such as P. carotorum, B. cinerea, C. fructicola Sau-3, and C. gloeosporioides according to incubation time. Especially, the fermented plant extracts showed the most active activities for Colletotrichum genus to inhibit mycelium growth. Metabolite changes in fermented S. flavescens and E. sessiliflorus extracts were confirmed through LC-Q-TOF/MS. Flavonoid and peptide derivatives were improved in fermented S. flavescens and E. sessiliflorus extracts compared to their unfermented one, respectively. This study suggested that the isolated Bacillus microbial fermentation could be a valuable tool in improving the bioactivity of S. flavescens and E. sessiliflorus extracts to have potential with more environmentally-friendly antifungal agents.

Rice false smut caused by Ustilaginoidea virens is one of the most devastating diseases on rice worldwide, which results in serious reduction of rice quality and yield. As an airborne fungal disease, early diagnosis of rice false smut, monitoring the epidemics and distribution of its pathogens, is particularly important to management the infection. In this study, a quantitative loop-mediated isothermal amplification (q-LAMP) method for the U. virens detection and quantifying was developed. This method has higher sensitivity and efficiency compared to quantitative real-time PCR (q-PCR) method. The species-specific primer sets UV-2 used was design based on the unique sequence of U. virens ustiloxins biosynthetic gene (NCBI accession number: BR001221.1). The q-LAMP assay was able to detect a concentration of 6.4 spores/mL at an optimal reaction temperature of 63.4℃ within 60 min. Moreover, the q-LAMP assay can even achieve accurate quantitative detection when there were only 9 spores on the tape. A linearized equation for the standard curve, y =-0.2866x + 13.829 (x is the amplification time, the spore number = 100.65y), was established for detection and quantifying of U. virens. In field detection applications, this q-LAMP method is more accurate and faster than traditional observation method. Collectively, this study has established a powerful and simple monitoring tool for U. virens, which provide valuable technical supports for forecast and management of rice false smut, and theoretical basis for precise fungicide application.

This present work explores the performance of a thermal-magnetic engine of Otto type, considering as a working substance an effective interacting spin model corresponding to the q− state clock model. We obtain all the thermodynamic quantities for the q = 2, 4, 6, 8 cases in a small lattice size (3×3 with free boundary conditions) by using the exact partition function calculated from the energies of all the accessible microstates of the system. The extension to bigger lattices was performed using the mean-field approximation. Our results indicate that the total work extraction of the cycle is highest for the q=4 case, while the performance for the Ising model (q=2) is the lowest of all cases studied. These results are strongly linked with the phase diagram of the working substance and the location of the cycle in the different magnetic phases present, where we find that the transition from a ferromagnetic to a paramagnetic phase extracts more work than one of the Berezinskii–Kosterlitz–Thouless to paramagnetic type. Additionally, as the size of the lattice increases, the extraction work is lower than smaller lattices for all values of q presented in this study.

Amid to the COVID-19 pandemic, digital health literacy (DHL) has become a significant public health concern. This research aims to assess information seeking behavior, as well as the ability to find relevant information and deal with DHL among university students in Pakistan. An online-based cross-sectional survey, using a web-based interviewing technique, was conducted to collect data on DHL. Simple bivariate and multivariate linear regression was performed to assess the association of key characteristics with DHL. The results show a high DHL related to COVID-19 in 54.3% of students. Most of the Pakistani students demonstrated ~50% DHL in all dimensions, except of reliability. Multivariate findings showed that gender, sense of coherence and importance of information were found to be significantly associated with DHL. However, a negative association was observed with students’ satisfaction with information. This led to the conclusion that critical operational and navigations skills are essential to achieve COVID-19 DHL and cope with stress, particularly to promote both personal and community health. Focused interventions and strategies should be designed to enhance DHL amongst university students to combat the pandemic.

Integrated ultra-low-loss waveguides are highly desired for integrated photonics to enable applications that require long delay lines, high-Q resonators, narrow filters, etc. Here we present an ultra-low-loss silicon waveguide on 500 nm thick SOI platform. Meter-scale delay lines, million-Q resonators and tens of picometer bandwidth grating filters are experimentally demonstrated. We design a low-loss low-reflection taper to seamlessly integrate the ultra-low-loss waveguide with standard heterogeneous Si/III-V integrated photonics platform to allow realization of high-performance photonic devices such as ultra-low-noise lasers and optical gyroscopes.

An all-dielectric metasurface composed of orthogonal-slit silicon disks is proposed in this study. By modifying the unit structure of the metasurface with the bound states in the continuum (BIC) theory, a sharp Fano resonance can be generated. The resonance properties of the metasurface are investigated by analyzing the effects of the structural parameters on the resonance using the eigenmode analysis method. The Q factor and the resonance wavelength can be adjusted by varying the slit width, the disk thickness, and the disk radius. The electromagnetic characteristics and mechanism of the toroidal dipole-BIC (TD-BIC) are explored in depth through an analysis of the multipole expansion of the scattered power, along with the electromagnetic field and the current distribution at resonance. This research provides a novel approach for excitation of a strong TD-BIC resonance and proposes potential applications in optical switches, high-sensitivity optical sensors, and related areas.