Blood cell analysis is a crucial diagnostic process in medical practice. In particular, detecting white blood cells (WBCs) is essential for diagnosing of many diseases. The manual screening of blood films is a time-consuming and subjective process, which can lead to inconsistencies and errors. Therefore, automated detection of blood cells can improve the accuracy and efficiency of the screening process. In this study, an explainable Vision Transformer (ViT) model was proposed for the automatic detection of WBCs from blood films. The proposed model utilizes the self-attention mechanism to extract relevant features from the input images and leverages transfer learning by incorporating pre-trained model weights to improve its performance. The proposed model achieved a classification accuracy of 99.40% for five distinct types of WBCs and exhibited potential in reducing the time required for manual screening of blood films by pathologists. Upon examination of the misclassified test samples, it was observed that incorrect predictions were correlated with the presence or absence of granules in the cell samples. To validate this observation, the dataset was divided into two classes, namely Granulocytes and Agranulocytes, and a secondary training process was conducted. The resulting ViT model trained for binary classification achieved an accuracy of 99.70%, recall of 99.54%, precision of 99.32%, and F-1 score of 99.43% during the test phase. To ensure the reliability of the ViT model's multi-class classification of WBCs, the pixel areas that the model focuses on in its predictions are visualized through the Score-CAM algorithm.

Quantum loops are processes that constitute quantum objects. In the causal model of quantum loops and quantum objects presented here, the nonlinear processes involve the elementary units of spacetime and the associated elementary units of quantum fields. As such, quantum loop processes are the sources of gravitational fields (i.e., spacetime curvature) and of the quantum objects wave function. The model may be viewed as a derivative of loop quantum gravity, spin networks and causal dynamical triangulation, although significant deviations to these theories exist. The causal model of quantum loops is based on a causal model of spacetime dynamics where space(-time) consists of interconnected space points, each of which is connected to a small number of neighboring space points. The curvature of spacetime is expressed by the density of these space points and by the arrangement of the connections between them. The quantum loop emerges in a nonlinear collective behavioral process from a collection of space points that carry energy and quantum field attributes.

In this paper a dynamic relationship between the CO2 emissions in Finland, Norway and Sweden is presented. With the help of a VAR(2) model, and using the Granger terminology, it is shown that the emissions in Finland are affecting those in Norway and Sweden. Other aspects of this dynamic relationship are presented as well.

Resistance to hormone therapy and disease progression is the major challenge in clinical management of prostate cancer (PC). Drugs currently used in PC therapy initially show a potent antitumor effect. Nevertheless, PC gradually develops resistance, relapses and spreads. Most patients develop, indeed, castrate-resistant PC (CRPC), which is almost incurable. The nerve growth factor (NGF) acts on a variety of non-neuronal cells by activating the NGF tyrosine-kinase receptor, TrkA. NGF signaling is deregulated in PC. In androgen-dependent PC cells, TrkA mediates the proliferative action of NGF through its cross talk with the androgen receptor (AR). Epithelial PC cells, however, acquire the ability to express NGF and TrkA, as the disease progresses, indicating a role for NGF/TrkA axis in PC progression and androgen-resistance. We here report that once activated by NGF, TrkA mediates proliferation, invasiveness and epithelial-mesenchyme transition (EMT) in various CRPC cells. NGF promotes organoid growth in 3D models of CRPC cells, and specific inhibition of TrkA impairs all these responses. Thus TrkA represents a new biomarker to target in CRPC.

Computational neuroscience combines mathematics, computer science models, and neurosciences for theorizing, investigating, and simulating neural systems involved in the development, structure, physiology, and cognitive abilities of the brain. Computational models constitute a major stake in translational neuroscience: the analytical understanding of these models seems fundamental to consider a translation towards clinical applications. Method: We propose a minimal typology of computational models, which allows distinguishing between more realistic models (e.g., mechanistic models) and pragmatic models (e.g., phenomenological models). Result: Understanding the translational aspects of computational models goes far beyond the intrinsic characteristics of models. First, we assume that a computational model is rarely uniquely mechanistic or phenomenological. Idealization seems necessary because of i) the researcher’s perspectives on the phenomena and the purposes of the study (i.e., by the relativity of the model); ii) The complexity of reality across different levels and therefore the nature and number of dimensions required to consider a phenomenon. Especially, the use of models goes far beyond their function, and requires considering external characteristics rooted in path dependence, interdisciplinarity, and pluralism in neurosciences. Conclusion: The unreasonable use of computational models, which are highly complex and subject to a shift in their initial function, could be limited by bringing to light such factors.

The construction of different roads, such as freeways, highways, major roads or minor roads must be accompanied by constant monitoring and evaluation of service delivery. Pavements are generally assessed by engineers in terms of the smoothness, surface condition, structural condition and surface safety. Pavement assessment is often conducted using the qualitative indices such as international roughness index (IRI), pavement condition index (PCI), structural condition index (SCI) and skid resistance value (SRV), which are used for smoothness assessment, surface condition assessment, structural condition assessment, and surface safety assessment, respectively. In this paper, Tehran-Qom Freeway in Iran has been selected as the case study and its smoothness and pavement surface conditions are assessed. At 2-km intervals, a 100-meter sample unit is selected in the slow-speed lane (totally, 118 sample units). In these sample units, the PCI is calculated after a visual inspection of the pavement and the recording of distresses. Then, in each sample unit, the average IRI is computed. The purpose of this study is to provide a method for estimating PCI based on IRI. The proposed theory was developed by Random Forest (RF), and Random Forest optimized by Genetic Algorithm (RF-GA) methods and these methods were validated using correlation coefficient (CC), scattered index (SI), and Willmott’s index of agreement (WI) criteria. The proposed method reduces costs, saves time and eliminates the safety risks.

The purpose of this work was analysing the compaction of a cohesive material using different DEM simulators to determine the equivalent contact models and identify how some parameters of the simulations affect the compaction results (maximum force and compacts appearance) and computational costs. For that purpose, three cohesion contact models were tested (‘linear cohesion’ in EDEM; ‘SJKR’ and ‘SJKR2’ in LIGGGHTS). The influence of the particle size distribution (PSD) on the results was also investigated. Further assessments were performed on the effect of selecting different timesteps, using distinct conversion tolerances for exporting the 3D models to STL files and moving the punch with different speeds. Consequently, it was possible to determine that a timestep equal to a 10% Rayleigh timestep, a conversion tolerance of 0.01 mm and a punch speed of 0.2 m/s are adequate for simulating the compaction process using the contact models in this work. In addition, the results determined that the maximum force was influenced by the PSD because of the rearrangement of the particles. The PSD was also related to the computational cost because of the number of simulated particles and their sizes. Finally, an equivalence was found between the linear cohesion and SJKR2 contact models

Digital Terrain Models (DTMs) are currently a fundamental source of information in Earth Sciences. However, DTM-based studies can contain remarkable biases if limitations and inaccuracies of these models are disregarded. In this work, four freely available datasets such as SRTM C-SAR DEM, ASTER GDEM V2 and two airborne LiDAR derived DTMs (at 5 and 1 m spatial resolution, respectively) were analysed in a comparative study in three geomorphologically contrasted catchments located in Mediterranean geoecosystems under intensive human land use influence. Vertical accuracy as well as the influence of each dataset characteristics on hydrological and geomorphological modelling applicability were assessed by using classic geometric and morphometric parameters and the more recently proposed index of sediment connectivity. Overall vertical accuracy – expressed as Root Mean Squared Error (RMSE) and Normalized Median Deviation (NMAD) – revealed the highest accuracy in the cases of the 1 m (RMSE = 1.55 m; NMAD = 0.44 m) and 5 m LiDAR DTMs (RMSE = 1.73 m; NMAD = 0.84 m). Vertical accuracy of SRTM was lower (RMSE = 6.98 m; NMAD = 5.27 m) but considerably higher than in the case of ASTER (RMSE = 16.10 m; NMAD = 11.23 m). All datasets were affected by systematic distortions. As a consequence, propagation of these errors caused negative impacts on flow routing, stream network and catchment delineation and, to a lower extent, on the distribution of slope values. These limitations should be carefully considered when applying DTMs for hydrogeomorphological modelling.

This study analyses uncertainties associated with the annual cycle of West African rainfall characteristics in 15 simulations of the Coupled Model Intercomparison Project phase 5 (CMIP5) over the Sahel and Guinean regions. Indices based on daily rainfall such as the frequency and the ntensity of wet days, the consecutive dry days (CDD) and wet days (CWD), the 95th percentile of daily rainfall (R95) and its contribution to the umulative monsoon rainfall (R95PTOT) have been assessed. Over both regions, TRMM, GPCP and CHIRPS observational datasets provide very consistent results on the annual cycle of precipitation but less so on the frequency of wet days. Conversely, higher uncertainties are noted on the intensity of wet days over both study areas, particularly over the Guinean region. Overall, CMIP5 simulations present much higher uncertainties in the representation of the mean precipitation climatology, often provide too early (late) onset dates over the Sahel (the Guinean region) and overestimate rainfall during the early and late monsoon phases. These errors do not compensate at the annual scale nor when considering West Africa as a hole. Results also reveal that over the Guinean region, the difficulty of models to represent the annual structure of the mean precipitation strongly involves biases in the representation of the annual cycle of the frequency of wet days. We found strong uncertainties in the simulation of the CWD and he CDD over both areas. Conversely for R95 and R95PTOT, the ncertainties in CMIP5 models appear somewhat weaker, but the magnitude of R95 is largely underestimated in most models.

Staphylococcus aureus is a high-priority pathogen causing severe infections with high morbidity and mortality worldwide. Many S. aureus strains are methicillin-resistant (MRSA) or even multi-drug resistant. It is one of the most successful and prominent modern pathogens. An effective fight against S. aureus infections requires novel targets for antimicrobial and antistaphylococcal therapies. Recent advances in whole-genome sequencing and high-throughput techniques facilitate the generation of genome-scale metabolic models (GEMs). Among the multiple applications of GEMs is drug-targeting in pathogens. Hence, comprehensive and predictive metabolic reconstructions of S. aureus could facilitate the identification of novel targets for antimicrobial therapies. This review aims at giving an overview of all available GEMs of multiple S. aureus strains. We downloaded all 114 available GEMs of S. aureus for further analysis. The scope of each model was evaluated, including the number of reactions, metabolites, and genes.Furthermore, all models were quality-controlled using Mᴇᴍᴏᴛᴇ, an open-source application with standardized metabolic tests. Growth capabilities and model similarities were examined. This review should lead as a guide for choosing the appropriate GEM for a given research question. With the information about the availability, the format, and the strengths and potentials of each model, one can either choose an existing model or combine several models to create models with even higher predictive values. This facilitates model-driven discoveries of novel antimicrobial targets to fight multi-drug resistant S. aureus strains.

Most hair relaxers or straighteners used for Afro-textured hair have a pH above 11. This pH, according to international occupational health and safety guidelines, is corrosive to the skin. Further, relaxers are associated with a 3-6 times increased risk of alopecia. The skin also gets into contact with these hair straightening products during application resulting in skin irritation. Using animals as test subjects to determine these products' potential risk and safety margin is standard practice; however, with the European Union (EU) ban on animal testing, the testing method needs to be replaced by newer in vitro laboratory technologies. This study used previously and newly established in vitro cell-based technologies and human-skin derived cells as laboratory models to evaluate relaxer-induced cytotoxicity. These technologies include endpoint (MTT, CCK-8 and flow cytometry) and real-time assays (real-time cell analysis (RTCA) and extracellular flux analysis). Cellular toxicity was evident following treatment of keratinocytes and fibroblasts with acceptable concentrations of thioglycolic acid (TGA, HSCH2COOH), ammonium bisulphite (NH4HSO3), lithium hydroxide (LiOH) and sodium hydroxide (NaOH) based relaxers. Real-time assays showed significant reductions (P<0.001) in cell index and ATP production following treatment of keratinocytes with as little as one-tenth of the acceptable concentrations. Increased apoptosis (47.9%, 58.0%, 76.7% and 80.3%) also occurred in cells after treatment with TGA, NH4HSO3, NaOH and LiOH, respectively. In conclusion, this study demonstrated that using skin cells in conjunction with advanced cell-based technologies could serve as alternatives to laboratory animals for accessing the toxicity margin of hair relaxers, straighteners and other cosmetics.

Solar energy is a renewable resources of energy which is broadly utilized and have the least pollution impact between the available alternatives of fossil fuels. In this investigation, machine leaening approaches of neural networks (NN), neuro-fuzzy and least squares support vector machine (LSSVM) are used to build the models for prediction of the thermal performance of a photovoltaic-thermal solar collector (PV/T) by estimating its efficiency as an output of the model while inlet temperature, flow rate, heat, solar radiation, and heat of sun are input of the designed model. Experimental measurements was prepared by designing a solar collector system and 100 data extracted. Different analyses are also performed to examine the credibility of the introduced approaches revealing great performance. The suggested LSSVM model represented the best performance regarding the mean squared error (MSE) of 0.003 and correlation coefficient (R²) value of 0.99, respectively.

Drought is one of the major stress factors affecting growth and development of plants. In this context, drought-related losses of crop plant productivity impede sustainable agriculture all over the world. In general, plants responses to water deficit by multiple physiological and metabolic adaptations at the molecular, cellular and organism levels. To understand the underlying mechanisms of drought tolerance, adequate stress models and arrays of reliable stress markers are required. Therefore, in this review we comprehensively address currently available models of drought stress, based on culturing plants in soil, hydroponic or agar culture. These experimental setups give access to different aspects of plant response to drought, like decrease of tissue water potential, reduction of stomata conductance and photosynthesis efficiency, accumulation of low-molecular weight solutes (metabolic adjustment) and drought protective proteins. Till now, this pattern of markers was successfully extended to the methods of enzyme chemistry, molecular biology and omics techniques. Thus, conventional tests can be efficiently complemented by determination of phytohormone and reactive oxygen species (ROS) contents, activities of antioxidant enzymes, as well as comprehensive profiling of transcriptome, proteome and metabolome.

The worldwide pandemic of coronavirus disease 2019 (COVID-19) has become an unprecedented challenge to global public health. With the intensification of the COVID-19 epidemic, the development of vaccines and therapeutic drugs against the etiological agent severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are also widespread. To prove the effectiveness and safety of these preventive vaccines and therapeutic drugs, available animal models that faithfully recapitulate clinical hallmarks of COVID-19 are urgently needed. Currently, animal models including mice, golden hamsters, ferrets, nonhuman primates and other susceptible animals have been involved in the study of COVID-19. 92 vaccine candidates have entered clinical trials after the primary evaluation in animal models, of which inactivated vaccines, subunit vaccines, virus-vectored vaccines and mRNA vaccines are promising vaccine candidates. In this review, we summarize the landscape of animal models and advanced vaccines with efficacy range from about 50% to more than 95%. In addition, we point out future directions for animal models and vaccine development, aiming at providing valuable information and accelerating the breakthroughs confronting SARS-CoV-2.

In terrain analysis and hydrological modeling, surface depressions (or sinks) in a digital elevation model (DEM) are commonly treated as artifacts and thus filled and removed to create a depressionless DEM. Various algorithms have been developed to identify and fill depressions in DEMs during the past decades. However, few studies have attempted to delineate and quantify the nested hierarchy of actual depressions, which can provide crucial information for characterizing surface hydrologic connectivity and simulating the fill-merge-spill hydrological process. In this paper, we present an innovative and efficient algorithm for delineating and quantifying nested depressions in DEMs using the level-set method based on graph theory. The proposed level-set method emulates water level decreasing from the spill point along the depression boundary to the lowest point at the bottom of a depression. By tracing the dynamic topological changes (i.e., depression splitting/merging) within a compound depression, the level-set method can construct topological graphs and derive geometric properties of the nested depressions. The experimental results of two fine-resolution LiDAR-derived DEMs show that the raster-based level-set algorithm is much more efficient (~150 times faster) than the vector-based contour tree method. The proposed level-set algorithm has great potential for being applied to large-scale ecohydrological analysis and watershed modeling.

Electricity distribution network operators face several operational constraints in the provision of safe and reliable power given that investments for network area reinforcement must be commensurate with improvements in network reliability. This paper provides an integrated approach for assessing the impact of different operational constraints on distribution network reliability by incorporating component lifetime models, time-varying component failure rates as well as the monetary cost of customer interruptions in an all-inclusive probabilistic methodology that applies a time-sequential Monte Carlo simulation. A test distribution network based on the Roy Billinton test system is modelled to investigate the system performance when overloading limits are exceeded as well as when preventive maintenance is performed. Standard reliability indices measuring the frequency and duration of interruptions, and the energy not supplied are complemented with a novel monetary reliability index. The comprehensive assessment includes not only average indices but also their probability distributions to adequately describe the risk of customer interruptions. Results demonstrate the effectiveness of this holistic approach as the impacts of operational decisions are assessed from both reliability and monetary perspectives. This informs network planning decisions through optimum investments and consideration of customer outage costs.

The Reeler mutation was described in mouse more than fifty year ago. Later, its causative gene (reln) was discovered in mouse, and its human orthologue (RELN) was demonstrated to be causative of lissencephaly 2 (LIS2) and about 20% of the cases of autosomal-dominant lateral temporal epilepsy (ADLTE). In both human and mice the gene encodes for a glycoprotein referred to as Reelin (Reln) that plays a primary role in neuronal migration during development and synaptic stabilization in adulthood. Besides LIS2 and ADLTE, RELN and/or other genes coding for the proteins of the Reln intracellular cascade have been associated more or less substantially to other conditions such as spinocerebellar ataxia type 7 and 37, VLDLR-associated cerebellar hypoplasia, PAFAH1B1-associated lissencephaly, autism and schizophrenia. According to their modalities of inheritances and with substantial differences among each other, these neuropsychiatric disorders can be modeled in the homozygous (reln-/-) or heterozygous (reln+/-) mouse. The usefulness of these mice as translational models is discussed, with focus on their construct and face validity. The latter is mainly treated directing the attention to the histological, neurochemical and functional observations in the cerebral cortex, hippocampus and cerebellum of Reeler mice and their human counterparts.

Automated medical diagnosis is one of the important machine learning applications in the domain of healthcare. In this regard, most of the approaches primarily focus on optimizing the accuracy of classification models. In this research, we argue that unlike general-purpose classification problems, medical applications, such as chronic kidney disease (CKD) diagnosis, require special treatment. In the case of CKD, apart from model performance, other factors such as the cost of data acquisition may also be taken into account to enhance the applicability of the automated diagnosis system. In this research, we have proposed two techniques for cost-sensitive feature ranking. An ensemble of decision tree models is employed in both the techniques for computing the worth of a feature in the CKD dataset. An automatic threshold selection heuristic is also introduced which is based on the intersection of features’ worth and their accumulated cost. A set of experiments are conducted to evaluate the efficacy of the proposed techniques on both tree-based and non-tree based classification models. The proposed approaches are also evaluated against several comparative techniques. Furthermore, it is demonstrated that the proposed techniques select around 1/4^th of the original CKD features while reducing the cost by a factor of 7.42 of the original feature set. Based on the extensive experimentation it is concluded that the proposed techniques employing feature-cost interaction heuristic tend to select feature subsets that are both useful and cost-effective.

The Multi-Level Model (=MLM) was suggested by A. Levichev as a description of quarks and gluons. The review recalls MLM-terminology while MLM-findings (for quarks and leptons) are compared to the theoretical and experimental data as accepted by the Standard Model (=SM). MLM is based on Segal’s compact space-time U(2) and on the sequence of embeddings: U(2) into U(3), U(2) into U(4), etc. These groups were called the levels (of matter): U(2) - the 0th (that is, our mundane world), U(3) - the 1st, U(4) - the 2nd, etc. Such a convention matches the SM-quarks' generations list. Each SM-quark is viewed either as a sunken proton, or as a captured proton. The MLM-proton is elementary and indestructible (hence no need for confinement). For MLM-quarks, in terms of the notion of a ruling group, flavor and color are defined mathematically. The number of colors (and of flavors) is level-dependent. For levels U(3) through U(6) the correspondence with the SM-quarks is established. Three new quarks and two new leptons are predicted. The SM-puzzle of quark and lepton generations is solved. Using the Han-Nambu scheme, the notion of the quark’s electric charge is expressed in terms of color charges. The original part of the review suggests studying the proton’s properties (like mass, shape and inner pressure) on the ba-sis of its wave function.

Inducible genetically defined mouse models of cancer uniquely facilitate the investigation of early events in cancer progression, however there are valid concerns about the ability of such models to faithfully recapitulate human disease. We developed an inducible mouse model of progressive lung adenocarcinoma (LuAd) that combines sporadic activation of oncogenic KRas^G12D with modest overexpression of c-MYC (KM model). Histological examination revealed a highly reproducible transition from adenoma to locally invasive adenocarcinoma within 6 weeks of oncogene activation. Laser-capture microdissection coupled with RNA-SEQ was employed to determine transcriptional changes associated with tumour progression. Upregulated genes were triaged for relevance to human LuAd using datasets from Oncomine and cBioportal. Selected genes were validated by RNAi screening in human lung cancer cell lines and examined for association with lung cancer patient overall survival using KMplot.com. Depletion of progression-associated genes resulted in pronounced viability and/or cell migration defects in human lung cancer cells. Progression-associated genes moreover exhibited strong associations with overall survival, specifically in human lung adenocarcinoma, but not in squamous cell carcinoma. The KM mouse model faithfully recapitulates key molecular events in human lung cancer and is a useful tool for mechanistic interrogation of LuAd progression.

Metastasis is the leading cause of cancer-related death and drives patient morbidity as well as healthcare costs. For several cancers, breast and prostate in particular, bone is the primary site of metastasis. Efforts to treat bone metastases have been stymied by a lack of models to study the progression and cellular players and signaling pathways driving bone metastasis. In this review, we examine the newly described and classic models of bone metastasis. Through the use of current in vivo, microfluidic and in silico computational models bone metastasis models we may eventually understand how cells escape the primary tumor and how these circulating tumor cells then home to and colonize the bone marrow. Further, future models may uncover how cell enter and escape dormancy to develop into overt metastases. Recreating the metastatic process will lead to the discovery of therapeutic targets for disrupting and treating bone metastasis.

Phylogenomics, the use of large datasets to examine phylogeny, has revolutionized the study of evolutionary relationships. However, genome-scale data have not been able to resolve all relationships in the tree of life; this could reflect, at least in part, the poor-fit of the models used to analyze heterogeneous datasets. Some of the heterogeneity may reflect the different patterns of selection on proteins based on their structures. To test that hypothesis, we developed a pipeline to divide phylogenomic protein datasets into subsets based on secondary structure and relative solvent accessibility. We then tested whether amino acids in different structural environments had distinct signals for the topology of the deepest branches in the metazoan tree. The most striking difference in phylogenetic signal reflected relative solvent accessibility; analyses of exposed sites (on the surface of proteins) yielded a tree that placed ctenophores sister to all other animals whereas sites buried inside proteins yielded a tree with a sponge-ctenophore clade. These differences in phylogenetic signal were not ameliorated when we repeated our analyses using the CAT model, a mixture model that is often used for analyses of protein datasets. In fact, the heterogeneous CAT model resulted in several rearrangements that are unlikely to represent evolutionary history. However, analyses conducted after recoding amino acids to limit the impact of deviations from compositional stationarity increased the congruence in the estimates of phylogeny for exposed and buried sites; after recoding amino acids both trees supported placement of ctenophores sister to all other animals. These results provide striking evidence that it is necessary to achieve a better understanding of the constraints due to protein structure to improve phylogenetic estimation.

Preclinical animal studies provide valuable opportunities to better understand human diseases and contribute to major advances in medicine. This review provides a comprehensive overview of ocular parameters in humans and selected animals, with a focus on the ocular surface, detailing species differences in ocular surface anatomy, physiology, tear film dynamics and tear film composition. We describe major pitfalls that tremendously limit the translational potential of traditional laboratory animals (ie., rabbits, mice and rats) in ophthalmic research, and highlight the benefits of integrating companion dogs with clinical analogues to human diseases into preclinical pharmacology studies. This One Health approach can help accelerate and improve the framework in which ophthalmic research is translated to the human clinic. Studies can be conducted in canine subjects with naturally occurring or non-invasively induced ocular surface disorders (eg., dry eye disease, conjunctivitis), reviewed herein, and tear fluid can be easily retrieved from canine eyes for various bioanalytical purposes. In this review, we discuss common tear collection methods, including capillary tubes and Schirmer tear strips, and provide guidelines for tear sampling and extraction to improve the reliability of analyte quantification (drugs, proteins, others).

Floods in Ukraine is a common natural phenomenon that repeats periodically and in some cases it becomes disastrous signs. In an average year in the rivers of Volyn passes from one to three floods with going beyond the limits of the floodplain. Floodplain of Styr river is located in the historical center of Lutsk city, that`s why issues of research and forecasting of floods are very important for a given city. Using modern technologies of geodesy and remote sensing allows to quickly determine and predict the floodplain area of settlements. The research results of water level changes on the Styr River and flood zones within the limits of Lutsk is proposed. The mathematical model of short-term forecasting of water level in flood period on the river Styr with implementation of geoinformation modeling of flooded areas using remote sensing data is proposed.

Interferometry Synthetic Aperture Radar (InSAR) is an advanced remote sensing technique for studying the earth's surface topography and deformations. It is used to generate high-quality Digital Elevation Models (DEMs). DEMs are a crucial and primary input to various topographical quantification and modelling applications. The quality of input DEMs can be further improved using fusion methods, which combine multi-sensor or multi-temporal datasets intelligently to retrieve the best information amongst the input data. This research study is based on developing a Neural Network based fusion approach for improving InSAR based DEMs in plain and hilly terrains. The study areas comprise of relatively plain terrain from Ghaziabad and hilly terrain of Dehradun and their surrounding regions. The training dataset consists of DEM elevations and derived topographic attributes like slope, aspect, topographic position index (TPI), terrain ruggedness index (TRI), and vector roughness measure (VRM) in different land use land cover classes of the study areas. The spaceborne altimetry ICESat-2 ATL08 photon data is used as a reference elevation. A Feed Forward Neural Network with backpropagation algorithm is trained based on the prepared training samples. The trained model produces fused DEMs by learning the relationship between the input and target samples. This is used to predict elevations in the test areas. The accuracy of results from the models are assessed with TanDEM-X 90 m DEM. The fused DEMs show significant improvement in terms of RMSE over the input DEMs with improvement factor of 94.65 % in plain area and 82.62 % in hilly area. The study concludes that the ANN with its universal approximation property is able to significantly improve the fused DEM.

Over the last decade, there has been a renewed interest in oral health workforce planning. The purpose of this review is to examine oral health workforce planning models on supply, demand and needs, mainly in respect to their data sources, modelling technique and use of skill mix. A search was carried out on PubMed, Web of Science, and Google Scholar databases for published scientific articles on oral health workforce planning models between 2010 to 2020. No restrictions were placed on the type of modelling philosophy, and all studies including supply, demand or needs based models were included. Rapid review methods guided the review process. Twenty-three studies from 15 different countries were included in the review. A majority were from high income countries (n=17). Dentists were the sole oral health workforce group modelled in 13 studies; only five studied included skill mix (allied dental personnel) considerations. The most common application of modelling was a workforce to population ratio or a needs-based demand weighted variant. Nearly all studies presented weaknesses in modelling process due to the limitations in data sources and/or non availability of necessary data to inform oral health workforce planning. Skill mix considerations in planning models were also limited to horizontal integration within oral health professionals. Planning for the future oral health workforce is heavily reliant on quality data being available for supply, demand and needs models. Integrated methodologies that expand skill mix considerations and account for uncertainty are essential for future planning exercises.

Rough volatility models are popularized by \cite{gatheral2018volatility}, where they have shown that the empirical volatility in the financial market is extremely consistent with rough volatility. Fractional Riccati equation as a part of computation for the characteristic function of rough Heston model is not known in explicit form as of now and therefore, we must rely on numerical methods to obtain a solution. In this paper, we give a short introduction to option pricing theory and an overview of the current advancements on the rough Heston model.

In this paper, we focus on variational Bayesian learning deterministic optimization methods for inference in biparametric exponential models where the parameters follow semiparametric regression structures. This combination of data models and algorithms contributes to solving real-world problems and reduces the computation time. This allows both the rapid exploration of many data models and the accurate estimation of the mean and variance functions through the connection between generalized linear models and graph theory. A simulation study was carried out to assess the performance of the deterministic approximation. Finally, herein, we present an application using macroeconomic data to emphasize the benefits of the proposed approach.

Link prediction is an iconic problem in complex networks because deals with the ability to predict nonobserved existing or future parts of the network structure. The impact of this prediction on real applications can be disruptive: from prediction of covert links between terrorists in their social networks to repositioning of drugs in molecular diseasome networks. Here we compare: (1) an ensemble meta-learning method (Ghasemian et al.), which uses an artificial intelligence (AI) stacking strategy to create a single meta-model from hundreds of other models; (2) a structural predictability method (SPM, Lü et al.), which relies on a theory derived from quantum mechanics and does not assume any model; (3) a modelling rule named Cannistraci-Hebb (CH, Muscoloni et al.), which relies on one brain-bioinspired model adapting to the intrinsic network structure.We conclude that brute-force stacking of algorithms by AI does not perform better than (and is often significantly outperformed by) SPM and one simple brain-bioinspired rule such as CH. This agrees with the Gödel incompleteness: stacking is optimal but incomplete, you cannot squeeze out more than what is already in your features. Hence, we should also pursue AI that resembles human-like physical ‘understanding’ of simple generalized rules associated to complexity. The future might be populated by AI that ‘steals for us the fire from Gods’, towards machine intelligence that creates new rules rather than stacking the ones already known.

Neural networks models are mostly represented by oriented graphs where only the components, constitutive elements of the graph, are transcribed into mathematical xpression. Indeed, accurate knowledge of the full expression of the model is required in certain situations such as selecting among several reference models, the one that best fits the available data or comparing the explanatory and predictive performance of an established model with respect to some reference models. In this paper, we establish a formalism of the mathematical expression for multilayer perceptron neural network in a general framework, MLP-p-n-q, with p, n and q natural integers and show its restriction to cases where one has a hidden layer and multivariate outputs (MLP-p-1-q), and then a single output (MLP-p-1-1). Then, we give some specific cases of the most commonly used models. An application case is presented in the context of solving a nonlinear regression problem.

A fully analytical treatment of the base-pair and codon dynamics in double-stranded DNA molecules is introduced, by means of a realistic treatment which considers different mass values for G, A, T, and C nucleotides and takes into account the intrinsic three-dimensional, helicoidal geometry of DNA in terms of a Hamitonian in cylindrical coordinates. Within the framework of the Peyrard-Dauxois-Bishop model we consider the coupling between stretching and stacking radial oscillations as well as the twisting motion of each base pair around the helix axis. By comparing the linearized dynamical equations for the angular and radial variables when going from the bp local scale to the longer triplet codon scale, we report an underlying hierarchical symmetry. The existence of synchronized collective oscillations of the base-pairs and their related codon triplet units are disclosed from the study of their coupled dynamical equations. The possible biological role of these correlated, long-range oscillation effects in double standed DNA molecules containing mirror-symmetric codons of the form XXX, XX’X, X’XX’, YXY, and XYX is discussed in terms of the dynamical equations solutions and their related dispersion relations.

Manual visual inspections typically conducted after an earthquake are high-risk, subjective, and time-consuming. Delays from inspections often exacerbate the social and economic impact of the disaster on affected communities. Rapid and autonomous inspection using images acquired from unmanned aerial vehicles offer the potential to reduce such delays. Indeed, a vast amount of re-search has been conducted toward developing automated vision-based methods to assess the health of infrastructure at the component and structure level. Most proposed methods typically rely on images of the damaged structure, but seldom consider how the images were acquired. To achieve autonomous inspections, methods must be evaluated in a comprehensive end-to-end manner, incorporating both data acquisition and data processing. In this paper, we leverage recent advances in computer generated imagery (CGI) to construct a 3D synthetic environment for simulation of post-earthquake inspections that allows for comprehensive evaluation and valida-tion of autonomous inspection strategies. A critical issue is how to simulate and subsequently render the damage in the structure after an earthquake. To this end, a high-fidelity nonlinear finite element model is incorporated in the synthetic environment to provide a representation of earthquake-induced damage; this finite element model, combined with photo-realistic rendering of the damage, is termed herein a physics-based graphics models (PBGM). The 3D synthetic en-vironment with PBGMs provide a comprehensive end-to-end approach for development and validation of autonomous post-earthquake strategies using UAVs, including: (i) simulation of path planning of virtual UAVs and image capture under different environmental conditions; (ii) au-tomatic labeling of captured images, potentially providing an infinite amount of data for training deep neural networks; (iii) availability of the ground truth damage state from the results of the finite-element simulation; and (iv) direct comparison of different approaches to autonomous as-sessments. Moreover, the synthetic data generated has the potential to be used to augment field datasets. To demonstrate the efficacy of PBGMs, models of reinforced concrete moment-frame buildings with masonry infill walls are examined. The 3D synthetic environment employing PBGMs is shown to provide an effective testbed for development and validation of autonomous vision-based post-earthquake inspections that can serve as an important building block for ad-vancing autonomous data to decision frameworks.

Capacity Expansion Models (CEMs) are optimization models used for long-term energy planning on national to continental scale. They are typically computationally demanding, thus in need of simplification, where one such simplification is to reduce the temporal representation. This paper investigates how using representative periods to reduce the temporal representation in CEMs distorts results compared to a benchmark model of a full chronological year. The test model is a generic CEM applied to Europe, equipped with a novel formulation for storage in model versions with reduced temporal representation. We test the performance of reduced models at penetration levels of wind and solar of 90%. Three measures for accuracy are used: (i) system cost, (ii) total capacity mix and (iii) regional capacity. We find that: (i) the system cost is well represented (~5% deviation from benchmark) with as few as ten representative days, (ii) the capacity mix is in general fairly well (~20% deviation) represented with 50 or more representative days, and (iii) the regional capacity mix displays large deviations (>50%) from benchmark for as many as 250 representative days. We conclude that modelers should be aware of the error margins when presenting results on these three aspects.

Object. Flooding in Ukraine is a common natural phenomenon that repeats periodically and in some cases it becomes disastrous. In an average year floods on the rivers of Volyn region take place from one to three times which extend beyond the limits of the floodplain. The floodplain of Styr river is located in the historical center of Lutsk city, that`s why issues of research and forecasting of floods are very important for a given city. Methodology. Using modern technologies of geodesy and remote sensing allows to quickly determine and predict the floodplain area of settlements. Based on the statistical data of the Volyn Regional Center for Hydrometeorology during the 7 year period 2011-2017 about water levels of the river Styr. We conducted mathematical modeling of fluctuations of water levels within the territory of Lutsk, based on creating a partial Fourier series for discrete values of middle-ten-day water levels values. The post hydrological measurements of Styr river water levels in the territory of Lutsk located on the Shevchenko Street comply with an altitude 172.87 meters. Based on the data of short-term flood forecasting in February and March, and relief data from the Department of Architecture and Urban Development of Volyn State Administration, we conducted visualization of the results using geographic information system QGIS. Results. The results of mathematical processing were the basis for geoinformation simulation of flooded areas using remote sensing data that are publicly available. Use of statistical and geospatial data in this article has great potential for further application in modeling the processes of natural and technogenic origin. Scientific novelty. The mathematical model of short-term forecasting of water levels during the flood period on the river Styr with implementation of geoinformation modeling of flooded areas using remote sensing data is proposed. Practical significance. The research results of water level changes on the Styr River and flood zones within the limits of Lutsk is proposed. The spring flood in February-March 2018, with the maximum water level 5.33 m, corresponds to an absolute mark of 178.20 m, which is forecasted in this article.

Remote sensing is one of the modern methods that have significantly developed over the last two decades and nowadays provides a new means for forest monitoring. High spatial and temporal resolutions are demanded for accurate and timely monitoring of forests. In this study multi-spectral Unmanned Aerial Vehicle (UAV) images were used to estimate canopy parameters (definition of crown extent, top and height as well as photosynthetic pigment contents). The UAV images in Green, Red, Red-Edge and NIR bands were acquired by Parrot Sequoia camera over selected sites in two small catchments (Czech Republic) covered dominantly by Norway spruce monocultures. Individual tree extents, together with tree tops and heights, were derived from the Canopy Height Model (CHM). In addition, the following were tested i) to what extent can the linear relationship be established between selected vegetation indexes (NDVI and NDVIred edge) derived for individual trees and the corresponding ground truth (e.g., biochemically assessed needle photosynthetic pigment contents), and ii) whether needle age selection as a ground truth and crown light conditions affect the validity of linear models. The results of the conducted statistical analysis show that the two vegetation indexes (NDVI and NDVIred edge) tested here have a potential to assess photosynthetic pigments in Norway spruce forests at a semi-quantitative level, however the needle-age selection as a ground truth was revealed to be a very important factor. The only usable results were obtained for linear models when using the 2nd year needle pigment contents as a ground truth. On the other hand, the illumination conditions of the crown proved to have very little effect on the model’s validity. No study was found to directly compare these results conducted on coniferous forest stands. This shows that there is a further need for studies dealing with a quantitative estimation of the biochemical variables of nature coniferous forests when employing spectral data acquired by the UAV platform at a very high spatial resolution.

We present the mathematical model of cooperative functioning of unconscious and consciousness. The model is based on the theory of open quantum systems. Unconscious and consciousness are treated as bio-information systems. The latter plays the role a measurement apparatus for the former. States of both systems are represented in Hilbert spaces. Consciousness performs measurements on the states which are generated in unconscious. This process of unconscious-conscious interaction is described by the scheme of indirect measurements. This scheme is widely used in quantum information theory and it leads to the theory of quantum instruments (Davis-Lewis-Ozawa). Our approach is known as quantum-like modeling. It should be sharply distinguished from modeling of genuine quantum physical processes in biosystems, in particular, in the brain. In the quantum-like framework, the brain is a black box processing information in the accordance with the laws of quantum theory. During the last 10-15 years this framework has been actively used in cognition, psychology, decision making, social and political sciences. The quantum-like scheme of unconscious-consciousness functioning has already been explored for sensation-perception modeling.

The use of nanomaterials has been increasing in recent times, and they are widely used in industries such as cosmetics, drug, food, water treatment and agriculture. The rapid development of new nanomaterials demands a set of approaches to evaluate the potential toxicity and risks related to them. In this regard, nanosafety has been using and adapting already existing methods (toxicological approach), but the unique characteristics of nanomaterials demand new approaches (nanotoxicology) to fully understand the potential toxicity, immunotoxicity and (epi)genotoxicity. Also, new technologies, such as organ-on-chip and sophisticated sensors, are under development and/or adaptation. All the information generated is used to develop new in silico approaches trying to predict the potential effects of newly developed materials. The overall evaluation of how from the production to final disposition chain of nanomaterials is evaluated under Life Cycle Assessment (LCA), which is becoming an important element of nanosafety considering sustainability and environmental impact. In this review we give an overview of all these elements of nanosafety.

For disciplines like biological science, security, and the medical field, link prediction is a popular research area. To demonstrate the link prediction many methods have been proposed. Some of them that have been demonstrated through this review paper are TransE, Complex, DistMult, and DensE models. Each model defines link prediction with different perceptions. We argue that the practical performance potential of these methods, having similar parameter values, using the fine-tuning technique to evaluate their reliability and reproducibility of results. We describe those methods and experiments; provide theoretical proofs and experimental examples, demonstrating how current link prediction methods work in such settings. We use the standard evaluation metrics for testing the model's ability.

Medical and translational scientific research requires the use of animal models as an initial approach to the study of new therapies and treatments, but when the objective is an exploration of translational potentialities, classical models fail to adequately mimic problems in humans. Among the larger animal models that have been explored more intensely in recent decades, small ruminants, namely sheep and goats, have emerged as excellent options. The main advantages associated to the use of these animals in research works are related to their anatomy and dimensions very similar to those of humans in most physiological systems, in addition to their low maintenance and feeding costs, tendency to be docile, long life expectancies and few ethical complications raised in society. The most obvious disadvantages are the significant differences in some systems such as the gastrointestinal, and the reduced amount of data that limits the comparison between works and the validation of the characterization essays. Despite everything, recently these species have been increasingly used as animal models for diseases in different systems, and the results obtained open doors for their more frequent and advantageous use in the future. The purpose of this review is to summarize the general principles related to the use of small ruminants as animal models, with focus on regenerative medicine, to group the most relevant works and results published recently and to highlight the potentials for the near future in medical research.

The current SARS-CoV-2 pandemic is still threatening humankind. Despite first successes in vaccine development and approval, no antiviral treatment is available for COVID-19 patients. The success is further tarnished by the emergence and spreading of mutation variants of SARS-CoV-2, for which some vaccines are not effective anymore. This highlights the urgent need for antiviral therapies even more. This article describes how the Genome-Scale Metabolic Model (GEM) of the host-virus interaction of human alveolar macrophages and SARS-CoV-2 was refined by incorporating the latest information about the virus’s structural proteins and the mutant variants B.1.1.7 and B.1.351. We confirmed the initially identified guanylate kinase as a potential antiviral target with this refined model and identified further potential targets from the purine and pyrimidine metabolism. The model was further extended by incorporating the virus’ lipid requirements. This opened new perspectives for potential antiviral targets in the altered lipid metabolism. Especially the phosphatidylcholine biosynthesis seems to play a pivotal role in viral replication. The guanylate kinase is even a robust target in all investigated mutation variants currently spreading worldwide. These new insights can guide laboratory experiments for the validation of identified potential antiviral targets. Only the combination of vaccines and antiviral therapies will effectively defeat this ongoing pandemic.

The Gleeble-1500D thermal simulation test machine was used to conduct the isothermal compression test on 21-4N at the strain rate ( ) of 0.01-10s-1, the deformation temperature (T) of 1273-1453K and the maximum deformation is 0.916. The data of the stress-strain ( - )were obtained. Based on the - data, the Johnson-Cook (J-C), modified J-C, Arrhenius and Back-Propagation Artificial Neural Network (BP-ANN) models were established. The accuracy of four models were verified, analyzed and compared. The results show that J-C model has a higher accuracy only under reference deformation conditions. When the deformation condition changes greatly, the accuracy of J-C model is significantly reduced. The coupling effect of T and of modified J-C model is considered, and the prediction accuracy is greatly improved The Arrhenius model introduces Zener-Hollomon (Z) to represent the coupling effect of T and , it has a fairly high prediction accuracy. And it can predict flow stress ( ) accurately at different conditions. The accuracy of BP-ANN model is the highest, but its learning rate is low, the learning and memory are unstable. It has no memory for the weights and thresholds of the completed training. So, there are certain limitations of it in use. Finally, a FEM of the isothermal compression experiment for four models were established, and the distribution of the equivalent stress field, equivalent strain field and temperature field with the deformation degree of 60% were obtained.

The Sustainable Development Goals (SDGs) is a global strategy that aims to obtain a more equitable and just world. These objectives are organized in 17 SDGs, which are detailed in 169 targets. Different international institutions have emphasized education's relevance to developing citizens who contribute to the SDGs' achievement for 2030. However, a review focused on Physical Education exclusively has not been performed yet. Therefore, the objective of this work is double. First, to analyze and select the specific goals of the SDGs that can be implemented in the subject of Physical Education. And second, to relate these specific goals to the different models based on Physical Education practices. This review showed how three institutional documents have previously related sport, physical exercise and physical education to the specific goals of the SDGs. Based on the search done, this document selects those goals that could be integrated into the educational context through Physical Education. The bibliographic and narrative analysis carried out in this research shows that of the 169 specific goals proposed in the SDGs, only 24 could be worked on in Physical Education. In addition, after this previous analysis, a proposal for the relationship between the practice-based models and these 24 goals is presented. The contributions made in this paper will allow teachers to establish links between PE sessions and SDGs while raising awareness to develop students who contribute to a more sustainable world.

Accurate assessment and projections of extreme climate events requires the use of climate datasets with no or minimal error. This study uses quantile mapping bias correction (QMBC) method to correct the bias of five Regional Climate Models (RCMs) from the latest output of Rossby Climate Model Center (RCA4) over Kenya, East Africa. The outputs were validated using various scalar metrics such as Root Mean Square Difference (RMSD), Mean Absolute Error (MAE) and mean Bias. The study found that the QMBC algorithm demonstrate varying performance among the models in the study domain. The results show that most of the models exhibit significant improvement after corrections at seasonal and annual timescales. Specifically, the European community Earth-System (EC-EARTH) and Commonwealth Scientific and Industrial Research Organization (CSIRO) models depict exemplary improvement as compared to other models. On the contrary, the Institute Pierre Simon Laplace Model CM5A-MR (IPSL-CM5A-MR) model show little improvement across various timescales (i.e. March-April-May (MAM) and October-November-December (OND)). The projections forced with bias corrected historical simulations tallied observed values demonstrate satisfactory simulations as compared to the uncorrected RCMs output models. This study has demonstrated that using QMBC on outputs from RCA4 is an important intermediate step to improve climate data prior to performing any regional impact analysis. The corrected models can be used for projections of drought and flood extreme events over the study area. This study analysis is crucial from the sustainable planning for adaptation and mitigation of climate change and disaster risk reduction perspective.

Despite the importance of few-shot learning, the lack of labeled training data in the real world, makes it extremely challenging for existing machine learning methods as this limited data set does not represent the data variance well. In this research, we suggest employing a generative approach using variational autoencoders (VAEs), which can be used specifically to optimize few-shot learning tasks by generating new samples with more intra-class variations. The purpose of our research is to increase the size of the training data set using various methods to improve the accuracy and robustness of the few-shot face recognition. Specifically, we employ the VAE generator to increase the size of the training data set, including the basic and the novel sets while utilizing transfer learning as the backend. Based on extensive experimental research, we analyze various data augmentation methods to observe how each method affects the accuracy of face recognition. We conclude that the face generation method we proposed can effectively improve the recognition accuracy rate to 96.47% using both the base and the novel sets.

The cooperation between humans and robots is becoming increasingly important in our society. Consequently, there is a growing interest in the development of models that can enhance the interaction between humans and robots. A key challenge in the Human-Robot Interaction (HRI) field is to provide robots with cognitive and affective capabilities, developing architectures that let them establish empathetic relationships with users. Several models have been proposed in recent years to solve this open-challenge. This work provides a survey of the most relevant attempts/works. In details, it offers an overview of the architectures present in literature focusing on three specific aspects of HRI: the development of adaptive behavioural models, the design of cognitive architectures, and the ability to establish empathy with the user. The research was conducted within two databases: Scopus and Web of Science. Accurate exclusion criteria were applied to screen the 1007 articles found (at the end 30 articles were selected). For each work, an evaluation of the model is made. Pros and cons of each work are detailed by analysing the aspects that can be improved so that an enjoyable interaction between robots and users can be established.

The generalization of Farey graphs and extended Farey graphs are all originated from Farey graph and scale-free and small-world simultaneously. We propose a labeling of the vertices for it that allows determining all the shortest paths routing between any two vertices only based on their labels. The maximum number of shortest paths between any two vertices is huge as the product of two Fibonacci numbers, however, the label-based routing algorithm runs in linear time O(n). The existence of an efficient routing protocol for Farey-type models should help the understanding of several physical dynamic processes on it.

The purpose of this paper is to analyze how Green Business Models (BMs) established by small and medium enterprises (SMEs) can incorporate product and process decarbonization in their components (value proposition, creation and capture) and to what extent this incorporation is affected by SME size. We use a database comprising 1,161 observations of SMEs, 466 in 2014 and 695 in 2016. The results show that SMEs’ value propositions give an intermediate valuation to both legally required and voluntary reduction of environmental impact, irrespective of SME size and the year analyzed. Regarding value creation, SMEs adopt practically no environmental practices, and there are significant differences according to size, with more difficulties than advantages stemming from small size. The study also shows that such environmental practices are not effective in reducing carbon. This diagnosis indicates that SMEs need help from the administration if they are to play a key role in the process of transformation toward a low-carbon economy. Legislative actions involving harsher environmental protection measures might help shape value propositions that place greater importance on reducing environmental impact, whereas training actions on available environmental techniques, promotion of research on how to adapt such techniques to SMEs and the development of specific practices for SMEs might enhance environmental value creation and capture in their BMs.

This article presents and discusses analytical data on the scientific publication record from 1910 to 2020 on two topics: "climate" and "climate change/global warming/climate emergency". The goal is to visualize how the publication record on these two topics has evolved over time, from different classification perspectives (year, country, source and organization). Three hypotheses are tested using data collected from Web of Science and various graphical representations of the data. It is found that research output related to the Earth’s contemporary changing climate overtook that of general climate research in 2011, and the publication ratio has been expanding in the last decade. There are significant differences in the publication countries and sources between the two topics, and conversely less significant differences in terms of organizations publishing these works. Differentiation factors that affect the level of research output and engagement on the climate challenge include: island versus landlocked nations, specialized versus general scientific journals, academic versus institutional organizations. The future of the publication records is discussed, such as the emergence of new terms to refer to the climate challenge, such as “climate emergency”.

The primary purpose of this article is to present a maturity model dealing with environmental manufacturing processes in a company. First, a theoretical approach is presented where evolution from the first industrial revolution to the present (Industry 4.0.) is outlined with a need to implement environmental initiatives. Chapter two contains a detailed literature review, which resulted in the creation of our own maturity model presented in the next chapter. According to some authors, Industry 4.0 is based on characteristics that have already been the focus of “lean and green” concepts. The practical part of the article is a case study that shows which areas of the manufacturing process have “environmental” potential. The goal was to move from resource consumption, pollutant emissions and more extensive manufacturing towards environmentally responsible manufacturing (ERM). Using environmental materials and methods reduces energy consumption, which generates cost savings and higher profits. Here, VSM (Value Stream Mapping) was applied to identify core processes with environmental potential. The final part of the article summarizes the work and presents future possibilities. This paper provides an understanding of the role of environmental manufacturing in the era of the 4th industrial revolution.

This paper proposes the impact of plug-in electric vehicles integrated into power distribution system based on voltage dependent control. The plug-in electric vehicles was modeled as the static load model in power distribution systems under balanced load condition. The power flow analysis is determined by using the basic parameters of the electrical network. The main point of this study are compare with voltage magnitude profiles, load voltage deviation, and total power losses of the electrical power system. There are investigating the affected from constant power load, constant current load, constant impedance load and plug-in electric vehicles load, respectively. The IEEE 33 bus test system is used to test the proposed method by assigning each load type to a balanced load in steady state and applied the solving methodology based on the bus injection to branch injection matric, branch current to bus voltage matrix, and current injection matrix to solve the power flow problem. The simulation results showed that the plug-in electric vehicles load had the lowest impact compared to other loads. The lowest plug-in values for the electric vehicle loads were 0.062, 119.67 kW and 79.31 kVar for the load voltage deviation, total active power loss and total reactive power loss, respectively. Therefore, this study can be verified that the plug-in electric vehicles load were affected to the lowest of the electrical power system in condition to same sizing and position. So that, in condition to the plug-in electric vehicles load added into the electrical power system with the conventional load type or complex load type could be considered that the affected from the plug-in electric vehicles load in next study.

Eastern (EEEV) and Venezuelan (VEEV) equine encephalitis viruses (EEVs) are related, (+)ssRNA arboviruses that can cause severe, sometimes fatal, encephalitis in humans. EEVs are highly infectious when aerosolized, raising concerns for potential use as biological weapons. No licensed medical countermeasures exist; given the severity/rarity of natural EEV infections, efficacy studies require animal models. Cynomolgus macaques exposed to EEV aerosols develop fever, encephalitis, and other clinical signs similar to humans. Fever is nonspecific for encephalitis in macaques. Electrocardiography (ECG) metrics may predict onset, severity, or outcome of EEV-attributable disease. Macaques were implanted with thermometry/ECG radiotransmitters and exposed to aerosolized EEV. Data was collected continuously, and repeated-measures ANOVA and frequency-spectrum analyses identified differences between courses of illness and between pre-exposure and post-exposure states. EEEV-infected macaques manifested widened QRS-intervals in severely ill subjects post-exposure. Moreover, QT-intervals and RR-intervals decreased during the febrile period. VEEV-infected macaques suffered decreased QT-intervals and RR-intervals with fever onset. Frequency-spectrum analyses revealed differences in the fundamental frequencies of multiple metrics in the post-exposure and febrile periods compared to baseline and confirmed circadian dysfunction. Heart rate variability (HRV) analyses revealed diminished variability post-exposure. These analyses support using ECG data alongside fever and clinical laboratory findings for evaluating medical countermeasure efficacy.

This case study assessed marketing arrangements used by small scale farmers in the Lake Basin and Lower Eastern bean corridors of Kenya to determine which markets work for rural producers and what changes are needed to produce and supply sufficient quantities for trade. Using exploratory research, data was collected through focus group discussions with six farmer groups representing a total of 1255 bean farmers and key informant interviews with extension staff. The results indicated that 94% of the farmers produced beans before identifying buyers with only 6% participating in group marketing. Though spot-market transactions with brokers and traders provided ready cash for the farmers, formal buyers were perceived to be more reliable but difficult to find and, operated stringent requirements which were a barrier to entry. A theory of change to integrate smallholders into formal markets to sustainably produce and supply sufficient volumes for trade should entail a transformation agenda at four levels of the value chain: intensification of production through pure stand models with greater use of certified high yielding varieties; stable price guarantees; a market-driven research and extension service and; an enabling political, policy and business environment in the bean value chain. Further research is needed to pilot these changes in a case control study.

Species distribution models have become tools of great importance in ecology since the advanced knowledge of suitable habitat of species is needed in the process of the world's biodiversity conservation. Models that use presence-only data are of great interests and are widely used in ecology due to their easy access. However, these models do not estimate accurately the true spatial species distribution based solely on presence-only data since they do not account for biases induced by the sampling techniques used and imperfect detection. To address this gap, Hierarchical integrated models have been recently introduced. Through this study, we assessed the relative performance of these new SDMs models using simulated data. The performance of the models was tested by comparing the estimates of parameters of the distribution models they provide with parameters used to simulate the distribution of the virtual species. The best model was the one whose estimates were close to the true distribution parameters of the virtual species. Results showed that analyzing Presence-only data in conjunction with Point-counts data through the Dorazio's Hierarchical model produced estimates of the coecients of the species intensity models with high precision and less bias while the Koshkina integrated model showed poor performance. Site-occupancy data, being not informative of species abundance, did not allow reducing biases in Presence-only data. The Dorazio's Hierarchical model produced estimates with high precision even with low detection probability. We have also found that the species rarity tends to in ate the variability of the models' estimates making modelling abundant species to be more accurate than modelling less abundant species. Hence, to model the species distribution with high precision based on Presence-only data, additional Point-counts data are required to account for sampling bias and imperfect detection.

The classical Rotational Isomeric State (RIS) model, originally proposed by Flory, has been used to rationalize a wide range of physicochemical properties of neutral polymers. However, many weak polyelectrolytes of interest are able to regulate their charge depending on the conformational state of the bonds. Recently, it has been shown that the RIS model can be coupled with the Site Binding (SB) model, for which the ionizable sites can adopt two states: protonated or deprotonated. The resulting combined scheme, the SBRIS model, allows to analyse ionization and conformational equilibria on the same foot. In the present work this approach is extended to include pH-dependent electrostatic Long Range (LR) interactions, ubiquitous in weak polyelectrolytes at moderate and low ionic strengths. With this aim the original LR interactions are taken into account by defining effective Short Range (SR) and pH-dependent parameters, such as effective microscopic protonation constants and rotational bond energies. The new parameters are systematically calculated using variational methods. The machinery of statistical mechanics for SR interactions, including the powerful and fast transfer matrix methods, can then be applied. The resulting technique, to which we will refer as Local Effective Interaction Parameters (LEIP) method, is illustrated with a minimal model of a flexible linear polyelectrolyte containing only one type of rotating bonds. LEIP reproduces very well the pH dependence of the degree of protonation and bond probabilities obtained by semi-grand canonical Monte Carlo simulations, where LR interactions are taken explicitly into account. The reduction in the computational time in several orders of magnitude suggests that the LEIP technique could be useful in a range of areas involving linear weak polyelectrolytes, allowing direct fitting of the relevant physical parameters to the experimental quantities.

The Batch process of Adsorption were conducted using Congo red (CR) as the adsorbate and Jatropha curcas seed (chaff) as the adsorbent material. Adsorption kinetics and isotherms analysis were conducted and results obtained confirmed the adsorption process as highly dependent on effects such as; contact time, adsorbent dosage, initial dye concentration and the particle sizes of adsorbate. However, the sorption equilibrium for Congo red dye unto jatropha curcas seed (chaff) was reached within 180 minutes, more so, the Adsorption efficiency was recorded at 82.05%. The process of the experimental sorption kinetics followed a pseudo-second-order kinetic model while Freundlich isotherm model was best applicable for obtaining the equilibrium of the parameters. These is an effective confirmation and validation of jatropha curcas seed (chaff) application as environmentally friendly and low-cost biomaterial for dye removal from aqueous solutions and industrial effluents.

The Sharing Economy (SE) has dawn great attention from several stakeholders in society in the last five years. While business actors are interested in financial opportunities to meet consumer needs, new business models, the academia and governmental organizations are concerned with potential unintended effects on the society and environment. In the process of making a clearer comprehension of the SE phenomenon, researchers have identified that, despite its notable global growth, there still persists a lack of a more solid ground in understanding its origins and respective mechanisms under which it has been evolving over time as a category. In this research, we address the problematics of the origins and ascendency of the SE by examining the process by which the SE is arising as a new category, searching for conceptual clarification and pinpointing the legitimacy granted by key stakeholders. Our guiding research questions are: (1) how the SE was formed and evolved as a market category; and (2), as a market category, is the SE legitimate? Additionally, we attempt to identify the nature of the SE as a category. To answer these questions, we conducted an historical analysis of the expression SE and its equivalents. This paper deepens the discussion about the nature of the SE by providing evidence that (i) the SE has predominantly been formed by emergence processes, comprising social movement, similarity clustering and truce components. It is the combination of all these aforementioned processes that renders the SE a special case of market category formation, which, in turn, has been allowing communication, entrepreneurship, regulation and research about what really is the SE, and despite the evident lack of agreements regarding both the label and its content; (ii) there is a generalized legitimacy granted to the SE by a vast number of stakeholders, even though still lacking on the consolidation of socio-political legitimation, and (iii) the nature of the SE seems to fall in a metaphorical approach, particularly, the notion of radial categories.

In light of the self-simulation hypothesis, a simple form implementation of the principle of efficient language is discussed in a self-referential geometric quasicrystalline state sum model in three dimensions. Emergence is discussed in context of geometric state sum models.

G protein-coupled receptors (GPCRs) serve prominent roles in melanocyte lineage physiology, with an impact at all stages of development, as well as on mature melanocyte functions. GPCR ligands are present in the skin and regulate melanocyte homeostasis, including pigmentation. The role of GPCRs in the regulation of pigmentation and, consequently, protection against external aggression, such as ultraviolet radiation, has long been established. However, evidence of new functions of GPCRs directly in melanomagenesis has been highlighted in recent years. GPCRs are coupled, through their intracellular domains, to heterotrimeric G proteins, which induce cellular signaling through various pathways. Such signaling modulates essential cellular processes of melanomagenesis, such as proliferation and migration. GPCR-associated signaling in melanoma can be activated by the binding of paracrine factors to their receptors or directly by activating mutations. In this review, we present melanoma-associated alterations of GPCRs and their downstream signaling and discuss the various preclinical models used to evaluate new therapeutic approaches against GPCR activity in melanoma. Recent striking advances in our understanding of the structure, function, and regulation of GPCRs will undoubtedly broaden treatment options in melanoma in the future.

Organ-on-a-Chip (OoC) systems bring together cell biology, engineering, and material science for creating systems that recapitulate the in vivo microenvironment of tissues and organs. The versatility of OoC systems enables in vitro models for studying physiological processes, drug development, and testing in both academia and industry. This paper evaluates current platforms from the end-user perspective, elaborating on usability, complexity, and robustness. We surveyed 165 peers in over 30 countries and grouped the responses according to preliminary knowledge and the source of the OoC systems that are used. The survey clearly shows that current commercial OoC platforms provide a substantial level of robustness and usability - which is also indicated by an increasing adaptation of the pharmaceutical industry but a lack of complexity can challenge their use as a predictive platform. Self-made systems on the other hand are less robust and standardized but provide the opportunity to develop customized and more complex models which are often needed for human disease modeling. This review serves as a guide for researchers in the OoC field and encourages the development of next-generation OoCs.

The ability to predict the skin sensitization potential of small organic molecules is of high importance to the development and safe application of cosmetics, drugs and pesticides. One of the most widely accepted methods for predicting this hazard is the rodent local lymph node assay (LLNA). The goal of this work was to develop in silico models for the prediction of the skin sensitization potential of small molecules that go beyond the state of the art, with larger LLNA data sets and, most importantly, a robust and intuitive definition of the applicability domain, paired with additional indicators of the reliability of predictions. We explored a large variety of molecular descriptors and fingerprints in combination with random forest and support vector machine classifiers. The most suitable models were tested on holdout data, on which they yielded competitive performance (Matthews correlation coefficients up to 0.52; accuracies up to 0.76; areas under the receiver operating characteristic curves up to 0.83). The most favorable models are available via a public web service at https://nerdd.zbh.uni-hamburg.de/skinDoctor/ that, in addition to predictions, provides assessments of the applicability domain and indicators of the reliability of the individual predictions.

Background: Low-level physical activity (PA) among Chronic Low Back Pain (cLBP) is associated with various biopsychosocial factors. This research aimed to study the predictors of PA behavior among cLBP patients. Methods: In the present study 300 eligible patients with cLBP who referred to comprehensive health service centers in the Shahid Beheshti University of Medical Sciences (SBUMS) in Tehran, Iran were random selected.To diagnose the predictors of PA behavior, all the Theory of Reasoned Action (TRA) constructs were examined as risk factors to see if they influence on the probability of PA behavior occurrence and were interpreted through odds ratio (OR). SPSS version 19 was used to analyze the data. Results: Totally 280 cLBP patients with mean age of 57.07 ±13.09 years old participated in the study. This study showed that motivation to comply significant predictor the cLBP patients for subjective norm OR (%95CI): 2.095(0.116-2.792), p-value<0.001), intention was significant predictor for perform the PA behavior OR (%95CI): 1.431(0.138-1.538), p-value <0.001), behavior beliefs could predictor for attitude OR (%95CI): 1.276(0.106-1.355), p-value= 0.002). attitude, normative beliefs, subjective norm ,and evaluation outcome behavior could predictors the cLBP patients for intention to perform the PA behavior OR (%95CI): 1.188(0.032-1.312), p-value<0.001)., OR (%95CI): 1.158(0.076-2.208), p-value=0.003) ., OR (%95CI): 1.104(0.076-1.128), p-value<0.001) ., OR (%95CI): 0.814(0.301-1.440), p-value=0.007). Conclusions: This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm).

The effect of COVID-19 confinement regulations on air quality in the northwestern Alps is here assessed based on measurements at five valley sites in different environmental contexts. Surface concentrations of nitrogen oxides, ozone, particle matter, together with size, chemical, and optical (light absorption) aerosol properties, complemented by observations along the vertical column are considered. The 2020 concentration anomalies relative to previous years’ average are compared with the output of a machine learning algorithm accounting for weather effects and a chemical transport model, their difference being within 10–20 %. Even in the relatively pristine environment of the Alps, the «lockdown effect» is well discernible, both in the early confinement phase and in late 2020, especially in NOx concentrations (NO decreasing by >80 % and NO2 by >50 %). While ozone shows little variation, secondary aerosols increase due to enhanced transport from the neighbouring Po basin and coarse particles decrease due to missing resuspension by traffic and, in the city, to the shutdown of a steel mill. The NO2 vertical column density decreases by >20 %, whereas the aerosol profile is mainly influenced by large-scale dynamics, except a shallow layer about 500 m thick possibly sensitive to curtailed surface emissions.

The main purpose of this paper is to propose a novel optimization model with a new machine learning approach in the first section to achieve the best results in financial institutions in the second section. Since the constancy of efficacy derived from parametric and non-parametric is not significant, this paper provides a scientific assessment at the optimization section and proposes a novel combined parametric and non-parametric model which will be a new experiment in literature perception. A scientific assessment of banks based on a combination of the efficiency measurement method of CCR(Charnes, Cooper and Rhodes model) or CRS(Constant Return to Scale) BCC(Banker, Charnes, and Cooper model) or VRS (Variable Return to Scale) in Data Envelopment Analysis (DEA), as well as Stochastic Frontier Approach (SFA) for 65 banks during Feb to July 2020, are introduced. For analyzing the performance of the parametric and non-parametric approaches we have considered the linear regression and Unreplicated Linear Functional Relationship (ULFR). At the machine learning section, a novel four-layers data mining filtering pre-processes for selected supervised classification as well as unsupervised clustering algorithms to increase the accuracy and to remove unrelated attributes and data are applied. For the four kinds of preprocessing approaches of unsupervised attributes, supervised attributes, supervised instances, and unsupervised instances, we have chosen discretization, attribute selection, stratified remove folds, and resample filters respectively. Based on the nature of the suggested financial institution's dataset and attributes, the most appropriate preprocessing filter in each layer to achieve the highest performance is suggested. Finally, the superior bank, best performance model, and the most accurate algorithm are introduced. The results indicate that the bank number 56 is the superior bank. Among the proposed techniques, the novel recommended CVS compared with CCR-BCC and SFA models, has a more positive correlation with profit risk, and show a higher coefficient of determination values. Sequential Minimal Optimization(SMO) algorithm receives the highest accuracy in all four suggested filtering layers.

This primer provides an overview of the rapidly evolving field of generative artificial intelligence, specifically focusing on large language models like ChatGPT (OpenAI) and Bard (Google). Large language models have demonstrated unprecedented capabilities in responding to natural language prompts. The aim of this primer is to demystify the underlying theory and architecture of large language models, providing intuitive explanations for a broader audience. Learners seeking to gain insight into the technical underpinnings of large language models must sift through rapidly growing and fragmented literature on the topic. This primer brings all the main concepts into a single digestible document. Topics covered include text tokenization, vocabulary construction, token embedding, context embedding with attention mechanisms, artificial neural networks, and objective functions in model training. The primer also explores state-of-the-art methods in training large language models to generalize on specific applications and to align with human intentions. Finally, an introduction to the concept of prompt engineering highlights the importance of effective human-machine interaction through natural language in harnessing the full potential of artificial intelligence chatbots. This comprehensive yet accessible primer will benefit students and researchers seeking foundational knowledge and a deeper understanding of the inner workings of existing and emerging artificial intelligence models. The author hopes that the primer will encourage further responsible innovation and informed discussions about these increasingly powerful tools.

Persistent Spinal Pain Syndrome Type 2 (PSPS-T2), (Failed Back Surgery Syndrome), dramatically impacts on patient quality of life, as evidenced by Health-Related Quality of Life (HRQoL) assessment tools. However, the importance of functioning, pain perception and psychological status in HRQoL can substantially vary between subjects. Our goal was to extract patient profiles based on HRQoL dimensions in a sample of PSPS-T2 patients and to identify factors associated with these profiles. Two classes were clearly identified using a mixture of mixed effect models from a clinical data set of 200 patients enrolled in “PREDIBACK”, a multicenter observational prospective study including PSPS-T2 patients with 1-year follow-up. We observed that HRQoL was more impacted by functional disability for first class patients (n=136) and by pain perception for second class patients (n=62). Males that perceive their work as physical were more impacted by disability than pain intensity. Lower education level, lack of adaptive coping strategies and higher pain intensity were significantly associated with HRQoL being more impacted by pain perception. The identification of such classes allows for a better understanding of HRQoL dimensions and opens the gate towards optimized health-related quality of life evaluation and personalized pain management.

The first part of this paper contains a brief description of the beginnings of modern cosmology, which, the author will argue, was most likely born in the Year 1912. Some of the pieces of evidence presented here have emerged from recent research in the history of science, and are not usually shared with the general audiences in popular science books. In special, the issue of the correct formulation of the original Big Bang concept, according to the precise words of Fred Hoyle, is discussed. Too often, this point is very deficiently explained (when not just misleadingly) in most of the available generalist literature. Other frequent uses of the same words, Big Bang, as to name the initial singularity of the cosmos, and also whole cosmological models, are then addressed, as evolutions of its original meaning. Quantum and inflationary additions to the celebrated singularity theorems by Penrose, Geroch, Hawking and others led to subsequent results by Borde, Guth and Vilenkin. And corresponding corrections to the Einstein field equations have originated, in particular, R², f(R), and scalar-tensor gravities, giving rise to a plethora of new singularities. For completeness, an updated table with a classification of the same is given.

The energy efficiency of ice hockey arenas is a central concern for the administrations, as these buildings are well known to consume a large amount of energy. Since they are composite, complex systems, solutions to such a problem can be approached from many different areas, from managerial to technological to more strictly physical. In this paper we consider heat transfer processes in an ice hockey hall, during operating conditions, with a bottom-up approach based upon on-site measurements. Detailed heat flux, relative humidity and temperature data for the ice pad and the indoor air are used for a heat balance calculation in the steady-state regime, which quantifies the impact of each single heat source. We then solve the heat conduction equation for the ice pad in transient regime, and obtain a generic analytical formula for the temperature profile that can be used in practical applications. We then apply this formula to the resurfacing process for validation, and find good agreement with an analogous numerical solution. Since it is given with implicit initial condition and boundary conditions, it can be used not only in ice hockey halls, but in a large variety of engineering applications.

Despite the long history of using protein sequences to infer the tree of life the potential for different parts of protein structures to retain historical signal remains unclear. We propose that it might be possible to improve analyses of phylogenomic datasets by incorporating information about protein structure; we test this idea using the position of the root of Metazoa (animals) as a model system. We examined the distribution of “strongly decisive” sites (alignment positions that support a specific tree topology) in a dataset comprising &gt;1,500 proteins and almost 100 taxa. The proportion of each class of strongly decisive sites in different structural environments was very sensitive to the model used to analyze the data when a limited number of taxa were used but they were stable when taxa were added. As long as enough taxa were analyzed, sites in all structural environments supported the same topology (ctenophores sister to other animals) regardless of whether standard tree searches or decisive sites were used to select the optimal tree. However, the use of decisive sites revealed a difference between the support for minority topologies for sites in different structural environments; buried sites and sites in sheet and coil environments exhibited equal support for the minority topologies whereas solvent exposed and helix sites had unequal numbers of sites supporting the minority topologies. Given the plausible trees equal support for minority topologies is consistent with discordance among gene trees, making it possible the relatively slowly evolving buried (and sheet and coil) sites are giving an accurate picture of the true species tree as well as the amount of conflict among gene trees. Alternatively, the apparent support could reflect currently uncharacterized processes of molecular evolution. Regardless, it is clear that analyses of the deepest branches in the animal tree of life using sites in different structural environments are associated with a subtle data type effect that results in distinct phylogenetic signals.

Coordinated sets of extremely numerous digital data, on a given social or economic event, are treated by Artificial Intelligence tools to obtain reasonably accurate, valuable predictions. The same approach, applied to biomedical issues, as how to choose the right drug to completely cure a given cancer patient, does not reach satisfactory results. It is the “organized biological complexity”, which requires a different systems approach, to integrate, in an Augmented Intelligence strategy, statistical computations of digital data, network construction of “omics” findings, well-designed mathematical models and new experiments in an iterative pathway to reconstruct the “logic” beneath the “organized complexity”, as shown here for Systems Metabolomics of cancer. On this basis new diagnostic approaches, able to identify precision drug treatments, as well as new discovery strategy for more effective anti-cancer drugs are described.

Remote sensing (RS) has been widely adopted as a tool to investigate several biotic and abiotic factors, directly and indirectly, related to biodiversity conservation. European grasslands are one of the most biodiverse habitats in Europe. Most of these habitats are subject to priority conservation measure, and they are threatened by several human induced process. The broad expansions of few dominant species are widely reported as drivers of biodiversity loss. In this context, using Sentinel-2 (S2) images, we investigate the distribution of one of the most spreading species: <i>Brachypodium genuense</i>. We performed a binary Random Forest (RF) classification of <i>B. genuense</i> using a RS image and field sampled presence/absence points. Then, we integrate the occurrences obtained from RS classification into niche models to identify the topographic drivers of <i>B. genuense</i> distribution. Lastly, the impact of <i>B. genuense</i> distribution in the N2k habitats was assessed by overlay analysis. The RF classification process detected <i>B. genuense</i>'s cover with an overall accuracy of 91.18%. The integration of RS and topographic niche models shows that the most relevant topographic variables that influence the distribution of <i>B. genuense</i> are slope, elevation, solar radiation and Topographic Wet Index (TWI) in order of importance. The overlay analysis shows that 74.04% of the <i>B. genuense</i> identified in the study area falls on the semi-natural dry grasslands. The study highlights the importance of the RS classification and the topographic niche models as an integrated approach for mapping a broad-expansion species such as <i>B. genuense</i>. The coupled techniques presented in this work should be applicable to other plant communities with remotely recognizable characteristics for more effective management of N2k habitats.

Discrete, logic-based models are increasingly used to describe biological mechanisms. Initially introduced to study gene regulation, these models evolved to cover various molecular mechanisms, such as signalling, transcription factor cooperativity, and even metabolic processes. The abstract nature and amenability of discrete models to robust mathematical analyses make them appropriate for addressing a wide range of complex biological problems. Recent technological breakthroughs have generated a wealth of high throughput data. Novel, literature-based representations of biological processes and emerging algorithms offer new opportunities for model construction. Here, we review up-to-date efforts to address challenging biological questions by incorporating omic data into logic-based models, and discuss critical difficulties in constructing and analysing integrative, large-scale, logic-based models of biological mechanisms.

The usage of Quantum Similarity through the equation Z = {∀θ ∈ Z → ∃s ∈ S ∧ ∃t ∈ T : θ = (s, t)}, represents a way to analyze the way communication works in our DNA. Being able to create the object set reference for z being (s, t) in our DNA strands, we are able to set logical tags and representations of our DNA in a completely computational form. This will allow us to have a better understanding of the sequences that happen in our DNA. With this approach, we can also utilize mathematical formulas such as the Euler–Mascheroni constant, regression analysis, and computational proofs to answer important questions on Quantum biology, Quantum similarity, and Theoretical Physics.

We write the mutual information between an input speech utterance and its reconstruction by a Code-Excited Linear Prediction (CELP) codec in terms of the mutual information between the input speech and the contributions due to the short term predictor, the adaptive codebook, and the fixed codebook. We then show that a recently introduced quantity, the log ratio of entropy powers, can be used to estimate these mutual informations in terms of bits/sample. A key result is that for many common distributions and for Gaussian autoregressive processes, the entropy powers in the ratio can be replaced by the corresponding minimum mean squared errors. We provide examples of estimating CELP codec performance using the new results and compare to the performance of the AMR codec and other CELP codecs. Similar to rate distortion theory, this method only needs the input source model and the appropriate distortion measure.

Cost estimating based on building cost index plays an important role in project planning and management by providing accurate cost information. Recently, tremendous advances in cost estimating has been made but serious inaccuracies in it are still too frequently witnessed. This study aims to improve estimating accuracy for residential building costs in New Zealand. In this study, the New Zealand house prices index is involved in the transfer function models to produce forecasts of building costs for one-storey house, two-storey house, and town house in New Zealand. To demonstrate the effectiveness of the proposed models, this study compares the estimate results of the transfer function models with the univariate ARIMA models. The results indicate that the proposed transfer function models can achieve better outcomes than ARIMA models by considering the causality between building costs and New Zealand house prices. During the modelling process, the better cost estimation approach can be identified, and the movements of building costs are shown.

The integration of 3D city models with Building Information Models (BIM), abbreviated as GeoBIM, facilitates improved data support to several applications, e.g. 3D map updates, building permits issuing, detailed city analysis, infrastructure design, context-based building design, to name a few. To solve the integration, several issues need to be tackled and solved, i.e. harmonization of features, interoperability, format conversions, integration of procedures. The GeoBIM benchmark 2019, funded by ISPRS and EuroSDR, evaluated the state of implementation of tools addressing some of those issues. In particular, in the part of the benchmark described in this paper, the application of georeferencing to Industry Foundation Classes (IFC) models and making consistent conversions between 3D city models and BIM are investigated, considering the OGC CityGML and buildingSMART IFC as reference standards. In the benchmark, sample datasets in the two reference standards were provided. External volunteers were asked to describe and test georeferencing procedures for IFC models and conversion tools between CityGML and IFC. From the analysis of the delivered answers and processed datasets, it was possible to notice that while there are tools and procedures available to support georeferencing and data conversion, comprehensive definition of the requirements, clear rules to perform such two tasks, as well as solid technological solutions implementing them, are still lacking in functionalities. Those specific issues can be a sensible starting point for planning the next GeoBIM integration agendas.

Social Business Intelligence (SBI) enables companies to capture strategic information from public social networks. Contrary to traditional Business Intelligence (BI), SBI has to face the high dynamicity of both the social network contents and the company analytical requests, as well as the enormous amount of noisy data. Effective exploitation of these continuous sources of data requires efficient processing of the streamed data to be semantically shaped into insightful facts. In this paper, we propose a multidimensional formalism to represent and evaluate social indicators directly from fact streams derived in turn from social network data. This formalism relies on two main aspects: the semantic representation of facts via Linked Open Data and the support of OLAP-like multidimensional analysis models. Contrary to traditional BI formalisms, we start the process by modeling the required social indicators according to the strategic goals of the company. From these specifications, all the required fact streams are modeled and deployed to trace the indicators. The main advantages of this approach are the easy definition of on-demand social indicators, and the treatment of changing dimensions and metrics through streamed facts. We demonstrate its usefulness by introducing a real scenario user case in the automotive sector.

One of the key components of application performance monitoring (APM) software is 2 AI/ML empowered data analytics for predictions, anomaly detection, event correlations and root 3 cause analysis. Time series metrics, logs and traces are three pillars of observability and the valuable 4 source of information for IT operations. Accurate, scalable and robust time series forecasting and 5 anomaly detection are desirable capabilities of the analytics. Approaches based on neural networks 6 (NN) and deep learning gain increasing popularity due to their flexibility and ability to tackle complex 7 non-linear problems. However, some of the disadvantages of NN-based models for distributed cloud 8 applications mitigate expectations and require specific approaches. We demonstrate how NN-models 9 pretrained on a global time series database can be applied to customer specific data using transfer 10 learning. In general, NN-models adequately operate only on stationary time series. Application 11 to non-stationary time series requires multilayer data processing including hypothesis testing for 12 data categorization, category specific transformations into stationary data, forecasting and backward 13 transformations. We present the mathematical background of this approach and discuss experimental 14 results from the productized implementation in Wavefront by VMware (an APM software) while 15 monitoring real customer cloud environments.

In systems biology, biological phenomena are often modeled by ODE and distributed in the de facto standard file format SBML. The primary analyses performed with such models are dynamic simulation, steady-state analysis, and parameter estimation. These methodologies are mathematically formalized, and libraries for such analyses have been published. Several tools exist to create, simulate, or visualize models encoded in SBML. However, setting up and establishing analysis environments is a crucial hurdle for non-modelers. Therefore, easy access to perform fundamental analyses of ODE models is a significant challenge. We developed SBMLWebApp, a web-based service to execute SBML-based simulations, steady-state analysis, and parameter estimation directly in the browser without the need for any setup or prior knowledge to address this issue. SBMLWebApp visualizes the result and numerical table of each analysis and provides a download of the results. SBMLWebApp allows users to select and analyze SBML models directly from the BioModels Database. Taken together, SBMLWebApp provides barrier-free access to an SBML analysis environment for simulation, steady-state analysis, and parameter estimation for SBML models. SBMLWebApp is implemented in Java™ based on an Apache Tomcat® web server using COPASI, the SBSCL, and LibSBMLSim as simulation engines. SBMLWebApp is licensed under MIT with source code available from https://github.com/TakahiroYamada/SBMLWebApp. The program runs online at http://simulate-biology.org.

Duplex Stainless Steels (DSS) and Superduplex Stainless Steels (SDSS) are an important class of stainless steels because they combine the benefits of austenite and ferrite phases, resulting in steels with better mechanical properties and higher corrosion resistance. Due to these characteristics are widely employed in various industries. However, the appearance of deleterious phases in their microstructure impairs the properties of DSS and SDSS. Among the deleterious phases, the main one is the sigma phase (σ), which can be nucleated when the steel is exposed to the temperature range between 650 °C and 900 °C, reducing its toughness and resistance to corrosion. In a previous work, Fonseca and collaborators used two descriptors of the microstructural path to analyze the formation of sigma phase (σ), SV, interfacial area per unit volume between sigma phase and austenite, and <λ>, mean chord length of sigma, both in function of the VV, volume fraction of sigma, known in the literature as microstructural partial path (MP). In this work, the contiguity ratio is applied for the first time to describe the microstructural path in the study of sigma phase precipitation in SDSS. The contiguity ratio showed that the distribution of the ferrite/sigma boundaries is homogeneous. Thus, it is reasonable to infer that one has a uniform distribution of sigma phase nuclei within the ferrite. About the kinetics of sigma phase formation, the DSS can be described by the classical JMAK equation, whereas for the SDSS, the kinetics tends to follow the Cahn model for grain edge nucleation. Finally, we present the 3D reconstruction of the sigma phase in SDSS. The results demonstrate that the sigma phase nucleates at the edges of the ferrite/austenite interfaces. Moreover, the sigma phase grows consuming the ferrite, but it is not fully interconnected.

This paper investigates the contribution of business model innovations in improvement of food supply chains. Through a systematic literature review, the notable business model innovations in the food industry are identified, surveyed, and evaluated. Findings reveal that the innovations in value proposition, value creation processes, and value delivery processes of business models are the successful strategies proposed in food industry. It is further disclosed that rural female entrepreneurs, social movements, and also urban conditions are the most important driving forces inducing the farmers to reconsider their business models. In addition, the new technologies and environmental factors are the secondary contributors in business model innovation for the food processors. It is concluded that digitalization has disruptively changed the food distributors models. E-commerce models and internet of things are reported as the essential factors imposing the retailers to innovate their business models. Furthermore, the consumption demand and the product quality are two main factors affecting the business models of all the firms operating in the food supply chain regardless of their positions in the chain. The findings of the current study provide an insight into the food industry to design a sustainable business model to bridge the gap between food supply and food demand.

In situations of uncertainty, scenarios serve as input for evidence-based decision making. However, past experience shows that not all scenarios are treated equally, and we hypothise that only those based ion a world view shared by decision makers are perceived as credible and receive full attention. While intuitively plausible, this hypothesis has not been analysed by quantitative correlation analyses, so instead of drawing on quantitative data the paper analyses the archetypical scenarios developed in the ALARM project to substantiate the plausibility by a comparative analysis of world views, value systems and policy orientations. Shock scenarios are identified as a means to explore the possibility space of future developments beyond the linear developments models and most scenario storylines suggest. The analysis shows that the typical scenarios are based on mutually exclusive assumptions. In conclusion, a comparison of storyline and empirical data can reveal misperceptions, policy failures and the need to rethink world views as a necessary step to open up to new challenges. Deeply held beliefs will make this a transition unlikely to happen without severs crises, if not dedicated efforts to reveal the role of world views for scenarios and policies are undertaken.

AAs the global energy market undergoes a wholesale transformation accelerated by the need to decarbonise, a rapid transition to renewable energy and the mass deployment of distributed energy resources, autonomous energy networks or microgrids are emerging as an attractive mechanism for the delivery of electricity to end users. Yet in Australia, at least, relatively little is known about key aspects of microgrids that are fundamental to their successful deployment, not least the more commercial and economic elements rather than the purely technical. Drawing on the extant global literature on microgrids, this paper explores the most important of these aspects including business models, ownership and investment. Identifying the ambiguity, inconsistency and uncertainty evident in many of the feasibility studies currently in train across Australia, this paper highlights specific areas for future research that need to be addressed if the full potential of microgrids is to be realised in the context of a global energy transition both domestically and internationally.

Machine learning (ML) is a subdivision of artificial intelligence in which the machine learns from machine-readable data and information. It uses data, learns the pattern and predicts the new outcomes. Its popularity is growing because it helps to understand the trend and provides a solution that can be either a model or a product. Applications of ML algorithms have increased drastically in G.I.S. and remote sensing in recent years. It has a broad range of applications, from developing energy-based models to assessing soil liquefaction to creating a relation between air quality and mortality. Here, in this paper, we discuss the most popular supervised ML models (classification and regression) in G.I.S. and remote sensing. The motivation for writing this paper is that ML models produce higher accuracy than traditional parametric classifiers, especially for complex data with many predictor variables. This paper provides a general overview of some popular supervised non-parametric ML models that can be used in most of the G.I.S. and remote sensing-based projects. We discuss classification (Naïve Bayes (NB), Support Vector Machine (SVM), Random Forest (RF), Decision Trees (DT)) and regression models (Random Forest (RF), Support Vector Machine (SVM), Linear and Non-Linear) here. Therefore, the article can be a guide to those interested in using ML models in their G.I.S. and remote sensing-based projects

The paper briefly reviews the Clifford algebras of space Cl(3,0) and anti-space Cl(0,3) with a particular focus on the paravector representation, emphasizing the fact that both algebras have an isomorphic center represented just by two coordinates. Since the paravector representation allows assigning the scalar element of grade 0 to the time coordinate, we consider the relativity in such two-dimensional spacetime for a uniformly accelerated frame with the constant acceleration 3Hc. Using the Rindler coordinate transformations in two-dimensional spacetime and then applying it to Minkowski coordinates, we obtain the FLRW metric, which in the case of the Clifford algebra of space Cl(3,0) corresponds to the anti-de Sitter (AdS) flat (k=0) case, the negative cosmological term and an oscillating model of the universe. The approach with anti-Euclidean Clifford algebra Cl(0,3) leads to the de Sitter model with the positive cosmological term and the exact form of the scale factor used in modern cosmology.

Since December 2019, the coronavirus disease (COVID-19) has rapidly spread worldwide. The Mexican government has implemented public safety measures to minimize the spread of the virus. In this paper, the authors use statistical models in two stages to estimate the total number of coronavirus (COVID-19) cases per day at the state and national level in Mexico. Two types of models are proposed: first, a polynomial model of the growth for the first part of the outbreak until the inflection point of the pandemic curve and then a second nonlinear growth model is used to estimate the middle and the end of the outbreak. Model selection will be performed using Vuong’s test. The proposed models show overall fit similar to predictive models (e.g. time series, and machine learning); however, the interpretation of parameters is less complex for decision-makers and the residuals follow the expected distribution when fitting the models without autocorrelation being an issue.

Monin-Obukhov similarity theory (MOST) overestimates wind shear in some atmospheric stable conditions, i.e. Richardson number $R_f<0.25$. The overestimated wind shear that leads to an under-predicted friction wind speed and a lower ambient turbulence intensity for a given hub-height reference wind speed and a given roughness length, could influence wake modeling of a wind turbine. This work investigates the side effects of the breakdown of MOST on wake modeling under stable conditions and makes some modifications to the flow similarity functions to eliminate these side effects. Based on a field measurement in a wind farm, we firstly show that MOST predicts a larger wind shear for the atmospheric stability parameter $\zeta>0.1$ and proposes new flow similarity functions without constraining $R_f$ to limit the overestimated wind shear by MOST. Next, different turbulence models based on MOST and a modified one based on the new similarity functions are investigated through numerical simulations. These turbulence models are combined with the actuator disk model (AD) and Reynolds-averaged Navier–Stokes equations (RANS) to model wind turbine wakes under stable conditions. As compared to measurements, numerical results show that turbulence models based on MOST result in larger wake deficits and slower wake recovery rate with a square root of the mean-squared-error (RSME) of wake deficit in the range of 0.07-0.18. This overestimated wake effect is improved by applying the new similarity functions and the RSME of wake deficit is averagely reduced by 0.05. Finally, we check the role of the under-predicted turbulence intensity playing in the larger wake deficit predicted by models based MOST. Additional numerical simulations using the modified turbulence model are carried out, in which the roughness length is reduced to impose a hub-height ambient turbulence intensity equivalent to the MOST case. Simulation results show that reducing turbulence intensity enhances wake effects, however, it cannot reproduce the large wake deficit predicted by models based on MOST, which suggests that the overestimated wake effect by MOST could be also related to the overestimated wind shear.

The study takes into account different classes of tunnel boring machines (TBMs), with the aim of identifying correlation models which are meant to estimate, at a preliminary design phase, the construction time of a tunnel and to evaluate the mechanical and operational parameters of the TBMs, starting from the knowledge of the tunnel length and/or the excavation diameter. To achieve this goal, first of all a database was created, thanks to the collection of the most meaningful technical parameters from a large number of tunnels; afterward, it was statistically analysed through Microsoft Excel. In a first phase, forecasting models were identified for the three types of machines investigated, separately for compact rocks (open TBM) and fractured rocks (single and double shield TBM). Then, the mechanical parameters collected through the database were analysed, with the aim of obtaining models that take into account, in addition to the type of TBM, the geological aspect, and the type of rock characterising the rock mass. Finally, the validation of the study was proposed in a real case, represented by the Moncenisio base tunnel, a work included in the new Turin–Lyon connection line. The estimated values were compared with the real ones, in order to verify the accuracy of the experimental models identified.

This paper introduces the spatial component in cross-section econometric estimations and specifically, the spatial dependence effect inherent in some of the variables involved in the modelling process. First, the spatial structure of the data from thematic maps is observed and Moran's spatial autocorrelation indicators are presented. Subsequently, the spatial weights matrix is built under different specifications. Finally, several modelling specification strategies are shown and the interpretation of the estimated coefficients. The theoretical concepts are illustrated with examples and their corresponding R software codes. This code and databases are available in a freely accessible repository in the BE2SHARE-EUDAT platform so that they can be easily reproduced.

Cardiovascular diseases (CVD) are the leading cause of premature death and disability in humans. Increasing data suggest that CVD is closely related to lipid metabolism and signaling. This study aimed to assess whether circulating lysophospholipids (LPL), lysophosphatidic acids (LPA) and monoacylglycerols (MAG) may be considered as biomarkers of CVD. For this objective, the evolution of the plasma levels of 22 compounds (13 LPL, 6 LPA and 3 MAG) was monitored by liquid chromatography coupled with tandem mass spectrometry (HPLC/MS²) in different rat models of CVD, i.e. angiotensin-II-induced hypertension (HTN), ischemic chronic heart failure (CHF) and sugen/hypoxia(SuHx)-induced pulmonary hypertension (PH). On one hand, there was modest changes on the monitored compounds in HTN (LPA 16:0, 18:1 and 20:4), LPC 16:1) and CHF (LPA 16:0, LPC 18:1 and LPE 16:0 and 18:0) models compared to control rats but these changes were no longer significant after correction for multiple testing. On the other hand, PH was associated with important changes in plasma LPA with a significant increase in the 16:0, 18:1, 18:2, 20:4 and 22:6 species. A deleterious impact of LPA was confirmed on isolated human pulmonary smooth muscle cells with an increase in their proliferation. This study demonstrates that circulating LPA species are increased in rats with PH and may contribute to the pathophysiology of this disease. Additional experiments are needed to assess whether the modulation of LPA signaling in PH may be of interest.

One of the most rapidly advancing areas of deep learning research aims at creating models that learn to disentangle the latent factors of variation from a data distribution. However, modeling joint probability mass functions is usually prohibitive, which motivates the use of conditional models assuming that some information is given as input. In the domain of numerical cognition, deep learning architectures have successfully demonstrated that approximate numerosity representations can emerge in multi-layer networks that build latent representations of a set of images with a varying number of items. However, existing models have focused on tasks requiring to conditionally estimate numerosity information from a given image. Here we focus on a set of much more challenging tasks, which require to conditionally generate synthetic images containing a given number of items. We show that attention-based architectures operating at the pixel level can learn to produce well-formed images approximately containing a specific number of items, even when the target numerosity was not present in the training distribution.

Based on a local causal model of the dynamics of curved discrete spacetime, a causal model of quantum field theory in curved discrete spacetime is described. At the elementary level, space(-time) is assumed to consists of interconnected space points. Each space point is connected to a small discrete set of neighbor space points. Density distribution of the space points and the lengths of the space point connections depend on the distance from the gravitational sources. This leads to curved spacetime in accordance with general relativity. Dynamics of spacetime (i.e., the emergence of space and the propagation of space changes) dynamically assigns "in-connections" and "out-connections" to the affected space points. Emergence and propagation of quantum fields (including particles) are mapped to the emergence and propagation of space changes by utilizing identical paths of in/out-connections. Compatibility with standard quantum field theory (QFT) requests the adjustment of the QFT techniques (e.g., Feynman diagrams, Feynman rules, creation/annihilation operators), which typically apply to three in/out connections, to n > 3 in/out connections. In addition, QFT computation in position space has to be adapted to a curved discrete space-time.

Most existing flexible count regression models allow only approximate inference. This work proposes a new framework to provide an exact and flexible alternative for modeling and simulating count data with various types of dispersion (equi-, under- and overdispersion). The new method, referred as “balanced discretization”, consists in discretizing continuous probability distributions while preserving expectations. It is easy to generate pseudo random variates from the resulting balanced discrete distribution since it has a simple stochastic representation in terms of the continuous distribution. For illustrative purposes, we have developed the family of balanced discrete gamma distributions which can model equi-, under- and overdispersed count data. This family of count distributions is appropriate for building flexible count regressionmodels because the expectation of the distribution has a simple expression in terms of the parameters of the distribution. Using the Jensen–Shannon divergence measure, we have shown that under equidispersion restriction, the family of balanced discrete gamma distributions is similar to the Poisson distribution. Based on this, we conjecture that while covering all types of dispersion, a count regression model based on the balanced discrete gamma distribution will allow recovering a near Poisson distribution model fit when the data is Poisson distributed.

The Lightning Network (LN), a second-layer protocol built on top of the Bitcoin blockchain, is an innovative digital payment solution that offers increased convenience, speed, and cost-effectiveness to consumers and businesses alike. However, there is limited literature available on the characteristics of this nascent technology, the depth and breadth of the various business LN-related applications as well as relevant adoption/implementation challenges. This study aims to contribute to the understanding of the LN’s characteristics, its potential in enhancing business operations and its applicability across different sectors, while taking into account adoption and implementation challenges. We apply a narrative review methodology using a semi-systematic approach to examine new and emerging business models empowered by the LN and its characteristics, topology, performance, privacy, and security. We analyze the data to identify key themes and trends in the literature, offering a critical analysis of the strengths and weaknesses of the existing literature. Based on the findings, we provide several clusters of fruitful areas for future research directions. The findings of this study will help businesses make more informed decisions about adopting and leveraging the LN to improve their operations and enhance customer experience.

This study investigated the trends of registered Death and Birth in Nigeria using Generalized Linear Models. Annual data on Death and Birth was collected from National Population Commission for the period of 2004 to 2017. The Natural increase calculated revealed a positive trend in the natural increase in Nigeria from 2004 to 2017. Evidence from summary statistics revealed some level of over dispersion (variance > mean). This study explored Poisson Regression Models and Negative Binomial Regression Models using two links (identity and log). The results revealed a positive increase in registration of birth and death rates in Nigeria and among the competing the models, Negative Binomial regression model with identity link emerged as the best model for modeling birth and death rates registration in Nigeria. Data on numbers of deaths and causes of death are essential if countries are to determine priorities, formulate and monitor policies for public health care as well as other government policies that may be based on such data

The data-oriented paradigm has proven to be fundamental for the technological transformation process that characterizes Industry 4.0 (I4.0) so that Big Data & Analytics is considered a technological pillar of this process. The literature reports a series of system architecture proposals that seek to implement the so-called Smart Factory, which is primarily data-driven. Many of these proposals treat data storage solutions as mere entities that support the architecture's functionalities. However, choosing which logical data model to use can significantly affect the performance of the architecture. This work identifies the advantages and disadvantages of relational (SQL) and non-relational (NoSQL) data models for I4.0, taking into account the nature of the data in this process. The characterization of data in the context of I4.0 is based on the five dimensions of Big Data and a standardized format for representing information of assets in the virtual world, the Asset Administration Shell. This work allows identifying appropriate transactional properties and logical data models according to the volume, variety, velocity, veracity, and value of the data. In this way, it is possible to describe the suitability of SQL and NoSQL databases for different scenarios within I4.0.

There are guidelines on lactation following maternal analgo-sedative exposure, but these do not consider the effect of maternal fasting, nor fluid abstention on human milk macronutrient composition. We therefore performed a structured search (PubMed) on ‘human milk composition’ and screened title, abstract and full paper on ‘fasting’ or ‘abstention’ and ‘macronutrient composition’ (lactose, protein, fat, solids, triglycerides, cholesterol). This resulted in 6 papers and one abstract related to religious fasting (n=129 women) and observational studies in lactating women (n=23, healthy volunteers, fasting). These data reflect two different ‘fasting’ patterns: an acute (18-25h) model in 71 (healthy volunteers, Yom Kippur/Ninth of Av) women and a chronic fasting (Ramadan) model in 81 women. Changes were most related to electrolytes and were moderate, with almost no changes in macronutrients during acute fasting. We therefor conclude that neither short term fasting nor fluid abstention (18-25h) affect human milk macronutrient composition, so that women can be reassured when this topic were raised during consulting. Besides the nutritional relevance, this also matters as clinical research samples – especially to estimate analgo-sedative exposure by lactation - are commonly collected after maternal procedural sedation, associated with maternal fasting and physiology-based pharmacokinetic (PBPK) models assume stable human milk composition.

Cancer cells are adept at reprogramming energy metabolism and the precise manifestation of this metabolic reprogramming exhibits heterogeneity across individuals (and from cell to cell). In this study, we analyzed the metabolic differences between interpersonal heterogeneous cancer phenotypes. We used divergence analysis on gene expression data of 1156 breast normal and tumor samples from The Cancer Genome Atlas (TCGA) and integrated this information with a genome-scale reconstruction of human metabolism to generate personalized, context-specific metabolic networks. Using this approach, we classified the samples into four distinct groups based on their metabolic profiles. Enrichment analysis of the subsystems indicated that amino acid metabolism, fatty acid oxidation, citric acid cycle, androgen and estrogen metabolism and ROS detoxification distinguished these four groups. Additionally, we developed a workflow to identify potential drugs that can selectively target genes associated with the reactions of interest. MG-132 (a proteasome inhibitor) and OSU-03012 (a celecoxib derivative) were the top-ranking drugs identified from our analysis and known to have anti-tumor activity. Our approach has the potential to provide mechanistic insights into cancer-specific metabolic dependencies, ultimately enabling the identification of potential drug targets for each patient independently, contributing to a rational personalized medicine approach.

The analysis of microscopy images has always been an important yet time consuming process in in materials science. Convolutional Neural Networks (CNNs) have been very successfully used for a number of tasks, such as image segmentation. However, training a CNN requires a large amount of hand annotated data, which can be a problem for material science data. We present a procedure to generate synthetic data based on ad-hoc parametric data modelling for enhancing generalization of trained neural network models. Especially for situations where it is not possible to gather a lot of data, such an approach is beneficial and may enable to train a neural network reasonably. Furthermore, we show that targeted data generation by adaptively sampling the parameter space of the generative models gives superior results compared to generating random data points.

Interactome analyses have traditionally been applied to yeast, human and other model organisms due to the availability of protein-protein interactions data for these species. Recently these techniques have been applied to more diverse species using computational interaction prediction from genome sequence and other data types. This review describes the various types of computational interactome networks that can be created and how they have been used in diverse eukaryotic species, highlighting some of the key interactome studies in non-model organisms.

Polyphenols represent a group of secondary metabolites of plants which have been analyzed as potent regulators of multiple biological processes, including cell proliferation, apoptosis and autophagy, among others. These natural compounds exhibit beneficial effects and protection against inflammation, oxidative stress and related injuries including metabolic diseases, such as cardiovascular damage, obesity and diabetes and neurodegeneration. In the present review, we report the main biological effects in relationship to autophagy regulation in response to different dietary polyphenols and its impact on metabolic and neurodegenerative diseases