Adherence to the Mediterranean diet has been shown to lower the risk of developing chronic non-communicable diseases like cardiovascular and neurodegenerative diseases and cancer. Improvements in depression, participation in daily activities in older individuals, weight loss and reduction in adverse pregnancy outcomes are associated with adherence to the Mediterranean diet. The number of studies that have evaluated barriers to the adherence of the Mediterranean diet in the US and in particular, in racial and ethnic minority populations within the US are few. Among Native American and Alaskan Native populations, studies evaluating traditional or alternative Mediterranean diet adherence for chronic non-infectious diseases is unavailable. Mediterranean diet scoring instruments used in studies in European and Mediterranean countries and among white participants in the US fail to capture the dietary patterns of racial and ethnic minority populations. In this narrative review the food components of the traditional Mediterranean diet are discussed, adherence to the Mediterranean diet is examined in Mediterranean and non-Mediterranean countries and barriers preventing adherence to the Mediterranean diet in the US and among racial and ethnic minority populations is reviewed. Recommendations for improving nutrition education and intervention, and increasing adherence and cultural adaptions to the Mediterranean diet are provided.

Present study on land use land cover analysis and taluka wise combination of cropped area, carried out in Beed district of Maharashtra state in India and studied 11 talukas of the district. Secondary data on land use land cover and area in various crops has been collected, compiled and analyzed from various secondary sources. Simple descriptive statistics used to examine the agricultural land use land cover and J.C. Weaver’s crop combination technique was used for taluka wise analysis of crop combinations and on the basis of highest to smallest area engaged in particular crop, crops have been ranked. The study showed that, in the district as a whole, percentage of uncultivated land other than fallow was about 46 percent as compare to net sown area is only 35 percent in total geographical area (1063855ha) of Beed district. The study further revealed that about 42 percent area engaged in food crops and about 58 percent area occupied by nonfood crops, which includes cereals (25%), cotton (19%), pulses (13%), oilseed (12%), sugarcane (5%) and fruits and vegetables (3%). Results of Weaver’s crop combination technique showed that the Wadwani taluka demarcated as most diversified taluka by means of maximum number (sixteen) of crops combinations with the lowest variance value (14) found in the present investigation. Further, the study revealed that the high crop diversity found in Dharur taluka with eighteen crop combinations and the taluka has given first rank amongst others. To derive the crop diversity ranking, taluka wise maximum to minimum number of crop combinations derived in different talukas and given ranks accordingly. The study concluded that, agricultural land use analysis is essential for solving and optimizing the land use problem, maintaining socio-ecological balance, best utilization of scarce resources. The authors enlightened that the rational use of agricultural land has important for food security and biodiversity which increase the productivity and profitability of the agriculture sector and it indicates the decision making ability of farmers in study area.

Recent climate change and water pollution has affected algal diversity resulting in emergence of more tolerant species. They can be the indicators of water quality, pollution and seasonal changes. Present study revealed the green algal diversity and distribution pattern according to water parameters and season in the Lucknow City, India. The water sample were collected from seven sites within Lucknow and outskirts. The occurrence of a total of 36 taxa of green algae belonging to 11 genera are recorded. It has been observed that less polluted water is dominated by Spirogyra; where conductivity, TDS and salinity of water were low. Whereas the more polluted water was dominated by desmids. Dominance index was found highest in site 4 (0.61), where only three taxa were identified; whereas the lowest (0.13) was measured in site 1, where nine taxa were identified. This study also recorded several algal taxa for the first time from Lucknow.

During the high-speed flight of a vehicle in the atmosphere, surface friction with the air generates aerodynamic heating. The aerodynamic heating phenomenon can create extremely high temperatures near the surface. These high temperatures impact material properties and the structure of the aircraft, so thermal deformation measurement is essential in aerospace engineering. This paper revisits high-temperature deformation measurement using the digital image correlation (DIC) technique under high-intensity blackbody radiation with a precise speckle pattern fabrication and a heat haze reduction method. The effect of speckle pattern on the DIC measurement has been thoroughly studied at room temperature, but high-temperature measurement studies have not reported such effects so far. We found that the commonly used methods to reduce the heat haze effect could produce incorrect results. Hence, we propose a new method to mitigate heat haze effects. An infrared radiation heater was employed to make an experimental setup that could heat a specimen up to 950 ℃. First, we mitigated image saturation using a short-wavelength bandpass filter with blue light illumination, a standard procedure for high-temperature DIC deformation measurement. Second, we studied how to determine the proper size of the speckle pattern under a high-temperature environment. Third, we devised a reduction method for the heat haze effect. As proof of the effectiveness of our developed experimental method, we successfully measured the deformation of stainless steel 304 specimens from 25 ℃ to 800 ℃. The results confirmed that this method can be applied to the research and development of thermal protection systems in the aerospace field.

The Urban heat island (UHI) effect has evolved into one of the key environmental problems affecting urban ecological environment and sustainable development. Based on 52 Urban Thermal Heat spots (UTHSs) with significant differences between land use structure and UGI spatial layout within the influence range of UHI in Shanghai, Landsat-8/9 satellite images were used to construct a high-dimensional data set reflecting the impact of built environment components on urban thermal environment. Descriptive statistical analysis was used to analyze the spatial difference qualitatively. Using stepwise regression model and partial least square regression (PLSR) model, the complex response relationship between UGI pattern differentiation and urban thermal environment in three spatial stratification ranges of UTHSs was quantitatively analyzed. Overall, the statistical explanatory power of the partial least square regression PLSR model is due to the stepwise regression model. The PLSR model points out that moderately increasing the average building height, CA, PLAND, LSI and LPI play a positive role in inhibiting/slowing down the growth of LST (land surface temperature), and the cooling effect of index weights decreases in order. However, the interaction effects of CA×Cohesion×AI×LPI and PLAND×CA×Cohesion×AI×LPI exert relatively small weight on the cooling effect, and according to the results, suggestions such as UGI structure and urban construction layout optimization can effectively alleviate the urban heat island effect are proposed.

With recent advancements in network technology and spread of Internet, use of social network services and Internet of Things devices has flourished, leading to a continuous generation of large volumes of graph stream data, where changes, such as additions or deletions of vertices and edges occur over time. Additionally, owing to the need for efficient use of storage space and security requirements, graph stream data compression has become essential in various applications. Even though various studies on graph compression methods have been conducted, most of them do not fully reflect the dynamic characteristics of graph streams and complexity of large graphs. In this paper, we propose a compression scheme using provenance data to efficiently process and analyze large graph stream data. It obtains provenance data by analyzing graph stream data and builds a pattern dictionary based on this to perform dictionary-based compression. By improving the existing dictionary-based graph compression methods, it enables more efficient dictionary management through tracking pattern changes and evaluating their importance using provenance. Furthermore, it considers the relationships among sub-patterns using an FP-tree and performs pattern dictionary management that updates pattern scores based on time. Our experiments show that the proposed scheme outperforms existing graph compression methods in key performance metrics, such as compression rate and processing time.

The article presents an innovative method for synthesizing radiation patterns efficiently by 1 combining the Taguchi method and neural networks, while validating the results on a 10-element 2 antenna array. The Taguchi method aims to minimize product and process variability, while neural 3 networks are used to model the relationship between antenna design parameters and radiation 4 pattern characteristics. This approach utilizes Taguchi parameters as inputs for the neural network, 5 which is then trained on a dataset generated by the Taguchi method. After training, the network is 6 validated using a real 10-element antenna array. Analytical results demonstrate that this method 7 enables efficient synthesis of radiation patterns with a significant reduction in computation time 8 compared to traditional approaches. Furthermore, validation on the antenna array confirms the 9 accuracy and robustness of the approach, showing a high correlation between predicted performances 10 by the neural network model and actual measurements on the antenna array.In summary, our article 11 highlights that the combined use of the Taguchi method and neural networks, with validation on a 12 real antenna array, offers a promising approach for efficient synthesis of antenna radiation patterns. 13 This approach combines speed, accuracy, and reliability in antenna system design.

This study delves into a unique binary pattern found within the wellknown 3n+1 problem, or Collatz conjecture. Through careful analysis of the steps in the 3n+1 sequence, we have discovered a special binary representation that captures the behavior of all positive integers undergoing this transformation. With this new understanding, we have provided a solid proof confirming the validity of the 3n+1 problem for all positive integers. Our method goes beyond the need for extensive computational confirmation, providing a simple and elegant resolution to a long-standing mathematical mystery.

The number of diabetic patients worldwide is increasing rapidly. Prevention of diabetic reti-nopathy (DR), a leading cause of blindness, is a serious issue. We examined the effects of prophy-lactic pattern scanning laser retinal photocoagulation on DR development in 16 Spontaneously Diabetic Torii (SDT) fatty rats. Photocoagulation was applied to the right eyes of 8-week SDT fatty rats, and the left eyes served as the untreated controls. Electroretinography at 9 and 39 weeks of age and pathological examination of the retinal thickness and number of retinal folds, and immunohistochemistry of vascular endothelial growth factor and glial fibrillary acidic pro-tein at 24 and 40 weeks of age were performed bilaterally. No significant differences were seen between the left and right eyes in the apex latency and the amplitude of the oscillatory potential wave in the SDT fatty rats at 9 and 39 weeks of age and in the pathology and immunohistochem-istry in the SDT fatty rats at 24 and 40 weeks of age. Prophylactic pattern scanning retinal laser photocoagulation did not affect the development of DR in SDT fatty rats.

The Upper Hunter Valley is a major coal mining area in New South Wales (NSW), Australia. Due to the ongoing increase of mining activities, PM10 (air-borne particle with an aerodynamic diameter less than 10 micrometres) pollution has become a major air quality concern in local communities. The early part of this study identified two air quality subregions in the valley. This paper aims to provide a holistic summarisation of the relationships between elevated PM10 pollution in two subregions and the local- and synoptic-scale meteorological conditions for spring and summer, when PM10 pollution is relatively high. A catalogue of twelve synoptic types and a set of six local meteorological patterns have been quantitatively derived and linked to each other using the self-organising map (SOM) technique. The complex meteorology-air pollution relationships have been visualised/interpretated on the SOM planes for two representative locations. It was found that the influence of local meteorological patterns differed significantly for mean PM10 levels vs the occurrence of elevated pollution events and between air quality subregions. In contrast, synoptic types showed generally similar relationships with mean vs elevated PM10 pollution in the valley. Two local meteorological patterns, the hot-dry-northwesterly wind conditions and the hot-dry-calm conditions, were found most PM10 pollution conducive in the valley when combined with a set of synoptic counterparts. These synoptic types are featured with the influence of eastward migrating continental high pressure system and westerly troughs, or a ridge extending northwest towards coastal northern NSW or southern Queensland from the Tasman Sea. The method and results can be used in air quality research for other locations of NSW, or similar regions elsewhere.

Arboviruses are infections caused by arboviruses that may be either symptomatic or asymptomatic, according to individuals' resistance and immune response, which dietary patterns can influence. Thus, this study aimed to investigate the possible association between the occurrence of clinical manifestations of arboviruses and the dietary pattern of the population studied. The study was conducted in a rural population in the metropolitan area of Belém, Pará State, Brazil. The sampling consisted of 95 individuals during a febrile outbreak. Two investigations were conducted: clinical-epidemiological-dietary and laboratory investigation based on blood samples taken for arbovirus analysis. Out of the 95 individuals studied, more than half (57.89%) showed clinical manifestations. Following the laboratory serology (HI and IgM ELISA) analyses, viral isolation in C6/36 cells, and viral genome detection (RT-qPCR), the final diagnosis of the cases was 47.37% Oropouche Fever, 2.11% Oropouche Fever and Chikungunya Fever, and 1.05% Mayaro Fever. Regarding dietary pattern, as for the comparison analyses, statistical significance was observed between dietary pattern and classification regarding the presence of symptoms (p<0.05); after the correspondence analysis, symptomatic cases were more associated with a bad dietary pattern, while asymptomatic cases were more associated with a good dietary pattern.

The term `motor control´ encompasses a wide range of mechanisms thought to be implicated in the organization of movements. Their study, like that of any other scientific field, must use specific notions to get to grips with them. This review is therefore organized along a series of notions that are frequently used in motor control, and we will discuss them with particular emphasis on neurological conditions, which may disrupt normal motor functioning. We will start with a short description of the roles of space and time, in which movements take place. Subsequently we will deal with kinematics and kinetics (dynamics) of movements. Then, we will list the inputs to motoneurons (MNs), which, in different forms, convey signals from the central nervous system (CNS) to skeletal muscles and muscle spindles, including central pattern generators (CPGs), sensory inputs and supraspinal descending fiber systems. Some helpers in movement organization will be introduced, such as internal models and neuronal network models. A relatively brief section on sensory-motor learning will follow because learning abilities are required to endow the sensory-motor system with flexibility and adaptability. The major emphasis is placed on neurological processes, which result from genetic modifications, autoimmune diseases, neurodegenerative diseases, infections in the nervous system as well as vascular and traumatic lesions. These neurological diseases lead to a variety of impairments and symptoms, particularly movement derangements including cerebellar ataxia, spasticity, and (other) movement disorders such as Parkinson’s syndromes. The conclusion is that there is no unique top controller that controls ´motor control`.

Two strongly curved areas of the Carpathians in Romania are earthquake-prone: Vrancea - in the South-Eastern Carpathians, and Danubian – in the western edge of the Southern Carpathians. By far the highest seismicity episode in 2023 was recorded in the Southern Carpathians, near Targu Jiu city, of more than 4000 earthquakes. A first ML 5.2 mainshock was recorded on 13 February, followed by a second one, ML 5.7, on 14 February. Our purpose is to provide a first analysis of this sequence in order to explain its extent and unusual development, in time. The possible role of fluids in the middle crust, is discussed in connection with the rather unusual character of the space-time distribution of aftershocks. A large and high-quality dataset is provided by the dense array of seismic stations which has been gradually improved by adding new stations in the epicentral area. The thorough revision of the phase picking and location reveals a few interesting and intriguing features of seismicity that still remain worthy to be further investigated. The database built within this paper provides excellent information not only for Targu Jiu area, but for any other investigation in intra-continental regions characterized by diffuse and sporadic seismic activity.

Oncolytic virotherapy is a promising immunotherapy approach for cancer treatment, utilizing viruses to preferentially infect and eliminate cancer cells while stimulating immune responses. In this review we synthesize current literature on the molecular circuits of immune sensing and response to oncolytic virotherapy; focusing on viral DNA or RNA sensing by infected cells, cytokine and danger-associated signal sensing by neighboring cells, and subsequent downstream activation of immune pathways. The sequential sense-and-response mechanisms involve the triggering of molecular sensors by viruses or infected cells to activate transcription factors and related genes for a breadth of immune responses. We describe how molecular signals induced in the tumor upon virotherapy can trigger diverse immune signaling pathways, activating both antigen-presenting cell-based innate and T cell-based adaptive immune responses. Insights into these complex mechanisms provide valuable knowledge for enhancing oncolytic virotherapy strategies.

This systematic review provides a comprehensive neuropsychological analysis of psychotic spectrum disorders, including schizophrenia, bipolar disorder, and depression. It explores cognitive impairments in memory, attention, and executive function, and the relation between brain abnormalities and these deficits. The paper emphasizes the use of neuropsychological tests in diagnosis and early psychosis management, while also discussing interventions, the impact of dementia on psychosis, and the neurobiological patterns associated with these conditions. Additionally, it underlines the importance of childhood trauma in the development of psychosis and examines the effects of substance abuse and brain injury. Neuropsychological evaluations and targeted therapies are highlighted as crucial for the understanding, diagnosis, and treatment of psychotic disorders. The research further includes evidence of neurocognitive dysfunction in individuals with a high risk of psychosis and emphasizes the advanced brain aging in schizophrenia and bipolar disorder. The necessity of comprehensive clinical evaluations and targeted therapies for cognitive impairments is underscored throughout the research. The potential effects of dementia on individuals with psychosis, neurobiological patterns, the role of childhood trauma, the impact of psychosis in dementia patients, and proposed treatments are also explored in depth. Overall, the paper underscores the integral role neuropsychological knowledge plays in understanding, diagnosing, managing, and treating psychotic spectrum disorders.

Diacylglycerol kinase (DGK) is a lipid kinase that phosphorylates diacylglycerol (DAG) to generate phosphatidic acid (PA). Based on converting one important signaling molecule (DAG) to another (PA), DGK plays an important role in plant responses to abiotic stress including waterlogging stress. However, no studies have been reported on the characterization of the DGK gene family in the waterlogging-tolerant kiwifruit germplasm, Actinidia valvata Dunn. Here, we identified 18 AvDGK genes in the A. valvata genome. The phylogenetic analysis showed that AvDGKs can be classified into three clusters, and members within the same cluster have similar domain distribution, exon-intron structures and conserved motif compositions. Chromosome localization analysis revealed that all the AvDGK genes are located across 18 different chromosomes. There were 29 duplicated gene pairs in kiwifruit and all had undergone purifying selection during evolution. Promoter cis-element analysis revealed that the cis-elements within AvDGK genes are associated with multiple functions, including phytohormone signal transduction, stress response, and plant growth and development. The expression pattern analyses indicated that AvDGK play an important role in the fruit development and plant response to waterlogging stress. AvDGKs gene family in the tetraploid A. valvata genome might promote PA synthesis and subsequent signal transduction both under short-term and long-term waterlogging stress. These results provide information regarding the structural characteristics and potential function of DGK genes within kiwifruit and lay a fundamental basis for further research into breeding for enhancing the kiwifruit’s tolerance to waterlogging stress.

Pedestrian Dead Reckoning (PDR) is a promising algorithm for indoor positioning. However, the accuracy of PDR degrades due to the accumulated error, especially in multi-floor buildings. This paper introduces a three-dimensional (3D) positioning method based on terrain feature matching to reduce the influence of accumulated error in multi-floor scene. The proposed method involves two steps: motion pattern recognition and position matching calibration. The motion pattern recognition aims to detect different motion states, i.e., taking the stairs or horizontal walking, from the streaming data. Then, stair entrances and corridor corners are matched with transition points of motion states and pedestrian turning points, respectively. After matching, calibration is performed to eliminate the accumulated errors. By carrying out experiments on a two-floor closed-loop path with a walking distance about 145 m, it is shown that this method can effectively reduce the accumulated error of PDR , achieving accurate 3D positioning . The average error is reduced from 6.60 m to 1.83 m.

Objective: To use the ancient and modern medical record cloud platform (V2.3.5) to organize and explore the medication patterns of the "Three Causes, Extremity, and One Disease Syndrome Formula" by Chen Wuxuan, and to summarize its therapeutic ideas. Method: Collect and organize the "San Yin Si Tian Fang" in the "San Yin Ji Yi Zheng Fang Lun", and use the modern medical record cloud platform (V2.3.5) to conduct medication frequency statistical analysis, cluster analysis, and complex network analysis. As a result, a total of 16 Chinese herbal medicines were collected in the "Three Causes, Extreme and One Disease Syndrome Formula", involving 75 traditional Chinese medicines. Statistical analysis showed that roasted licorice was the most commonly used, followed by Pinellia ternata, papaya, ginger, and Poria cocos; Medications mainly include warm drugs, sweet and pungent flavors, as well as drugs that promote lung and spleen meridians. Cluster analysis can divide the above-mentioned traditional Chinese medicine into two groups, with specific grouping as follows. Group 1: ginger, white peony, aconite, papaya, and achyranthes bidentata; Group 2: roasted licorice, poria cocos, dried ginger, pinellia ternata, and green peel. Conclusion: The characteristics of the 16 prescriptions are biased towards Xin Gan Wen, emphasizing the regulation of the spleen and stomach, which may be related to the common use of prescription by doctors in the Song Dynasty and the tendency towards warm and dry medication.

: Human settlements have historically thrived near rivers for navigation, trade, and availability of water supply and resources. Night light data, representing economic activities provide a novel approach to studying the interactions between human activity and rivers over time. Here, we use the Defense Meteorological Satellite Program (DMSP) stable night light data from 2000-2013 as a proxy for human presence and activities to quantify the statistical relationships between night light presence and intensity in the Indus Basin, Asia. We test how these data are affected by proximity to trunk channels and by channel type (single/multi-thread) in the study area. We find that night light presence is enhanced by 26% within a 0 to 5 km proximity range of the Indus River and its tribu-taries, relative to the basin as a whole. We interpret this to represent increased human presence and activity within this zone. However, the mean intensity is lower near the river and higher away from the river signifying denser settlements, such as towns and cities which are preferentially located away from the Indus and its tributaries. Moreover, the enhancement of lit pixels signifying human presence and activities is increased by 18% near single-thread sections of the Indus River, compared to segments of the Indus displaying multi-thread morphologies. We suggest that this is due to the enhanced stability of single-threaded channels, relative to mobile multi-threaded channel reaches. This study demonstrates how night lights are an important tool to constrain the relationship between human presence and river dynamics in large catchments such as the Indus, and we suggest this data will have an important role in assessing differential flood spatial and social vulnerability at a regional scale.

In addition to their importance in statistical thermodynamics, probabilistic entropy measurements are crucial for understanding and analyzing complex systems, with diverse applications in time series and one-dimensional profiles. However, extending these methods to two- and three-dimensional data still requires further development. In this study, we present a new method to classify spatiotemporal processes based on entropy measurements. To test and validate the method, we selected four classes of similar processes related to the evolution of random patterns: dynamic colored noises ((i)~white and (ii)~red); (iii)~weak turbulence from reaction-diffusion; (iv)~hydrodynamic fully developed turbulence, and (v)~plasma turbulence from MHD. Considering seven possible ways to measure entropy from a matrix, we present the method as a parameter space composed of the two best separating measures of the five selected classes. The results highlight better combined performance of Shannon Permutation Entropy ($S^p_H$) and a new approach based on Tsallis Spectral Permutation Entropy ($S^s_q$). Notably, our observations reveal the segregation of reaction terms in this $S^p_H \times S^s_q$ space, a result that identifies specific sectors for each class of dynamic process, and can be used to train machine learning models for automatic classification of complex spatiotemporal patterns.

The purpose of the study was to identify factors characterizing a decrease in LV global systolic function in patients with ST-segment elevation myocardial infarction (STEMI) after revascularization using cardiac magnetic resonance imaging (MRI)-based ischemic injury pattern and laboratory parameters sensu left ventricular global systolic function. A total of 109 STEMI patients were examined. The patients underwent contrast-enhanced cardiac MRI with a 1.5 Tesla GE SIGNA Voyager (GE HealthCare, USA) on the 7th-10th days from the onset of the disease. According to cardiac MRI analysis, the patients were divided into the following groups with regard to left ventricular ejection fraction (LVEF) values: group 1 – patients with LVEF ≥50%; group 2 – patients with mildly reduced LVEF 40-49%; group 3 – patients with low LVEF <40%. A predominance of most parameters of the ischemic injury pattern was noted in patients with mildly reduced and low LVEF versus patient group with LVEF ≥50%. Some risk factors for a decrease in LVEF <50% systolic function in STEMI patients after revascularization were revealed: male gender; time from the onset of the anginal attack to revascularization; coronary artery status; several LV parameters; ischemic injury characteristics; natriuretic peptide and troponin I levels.

The purpose of this study is to analyze how global research cooperation patterns in the secondary battery industry have changed over recent years and to identify the evolution in the focus of research. To this end, network analysis was performed using the nationality information of the authors of a 10-year multinational joint research paper related to lithium-ion batteries. Furthermore, keyword analysis and topic modeling were performed using the abstract data from the study. The results of this study confirm that some countries that are not well-known in the field, such as Australia, Spain, and France, showed high centrality, compared with the level of cooperation scale. Additionally, six research topics were identified. According to a comparison over the first half of the decade, no difference was observed in the appearance of keywords indicating high energy density and conductivity with lithium, a key mineral. Keyword distribution was high for topics like battery charging and discharging in the first half of the decade, and for next-generation battery materials, such as solid electrolytes, lithium metal anodes, and lithium-sulfur batteries in the second. These results provide insights into the establishment of R&D cooperation strategies by countries and pre-planning by companies in the battery industry.

In general sound waves propagate radially outwards from a point source. These waves will continue in the same direction, decreasing in intensity, unless a boundary condition is met. To arrive at a universal understanding of the relation between frequency and wave propagation within spatial boundaries, an analysis and comparison is made between the results of Chladni plate experiments and Chladni plate simulations. We consider a finite range of frequencies and plate geometries and present a model that has been shown to successfully recreate the nodal line patterns to a first approximation. We discuss the benefits of such a model and the future work necessary to develop the model to its full predictive capacity.

As the world increasingly becomes more interconnected, the demand for safety and security is ever-increasing, particularly for industrial networks. This has prompted numerous researchers to investigate different methodologies and techniques suitable for intrusion detection systems (IDS) requirements. Over the years, many studies have proposed various solutions in this regard including signature-based and machine-learning (ML) based systems. More recently, researchers are considering deep learning (DL) based anomaly detection approaches. Most proposed works in this research field aimed to achieve either one or a combination of high accuracy, considerably low false alarm rates (FARs), high classification specificity and detection sensitivity, achieving lightweight DL models, or other ML and DL-related performance measurement metrics. In this study, we propose a novel method to convert a raw dataset to an image dataset to magnify patterns. Based on this we devise an anomaly detection for IDS using a lightweight convolutional neural network (CNN) that classifies denial of service and distributed denial of service. The proposed methods were evaluated using a modern dataset, CSE-CIC-IDS2018, and a legacy dataset, NSL-KDD. We have also applied a combined dataset to assess the generalization of the proposed model across various datasets. Our experimental results have demonstrated that the proposed methods achieved high accuracy and considerably low FARs with high specificity and sensitivity. The resulting loss and accuracy curves have also demonstrated the excellent generalization of the proposed lightweight CNN model, effectively avoiding overfitting. This holds for both the modern and legacy datasets, including their mixed version.

The scattering pattern from a narrow absorbing/amplifying grating is investigated. A simple model of a narrow amplifying grating is solved exactly numerically and approximately analytically for the regime where the beam’s wavelength is much shorter than the grating’s wavelength. The main results are: The incident angle divides the scattering pattern into two regimes: below and above the incident angles. The former regime has a weak dependence on the incident angle but has a strong dependence on the scattering one. In this regime, a new grating formula is derived. The opposite occurs in the latter regime, which is very sensitive to the incident angle, but has only weak dependence on the scattering angle. Consequently, at certain incident angles, all the scattering is concentrated in the first regime, i.e., all scattering angles are lower than the incident angle.

Any malocclusion can be associated with various face development patterns, including hyper, neutral and hypodivergent growth patterns. We measured face height ratios, angle formed by Y axis to SN and growth patterns in various malocclusions in a group of patients from Timis county. The pretreatment digital cephalograms of 350 participants were split into three groups based on Angle's classification of dentoalveolar malocclusion. Every cephalogram was digitally traced and analyzed using a composite cephalometric method analysis utilizing the WebCeph imaging cephalometric program, which included two linear and one angular. In general, patients from Timis county have a hypodivergent development pattern. Hypodivergent development pattern predominated in group I, II, and III. Group I hyperdivergent 5.14%, normodivergent 16.01%, hypodivergent 78.85%. Group II hyperdivergent 2.78%, normodivergent 14.44%, hypodivergent 82.78%. Group III hyperdivergent 10.53%, normodivergent 10.53%, hypodivergent 78.94%. In all three groups, the value of the angle formed by Y axis to SN is within normal limits group I 65.4 ±4.34°, group II 63.87± 3.86° and group III 64.66 ±5.28°. A strong negative correlation was found between angle: Y axis to SN and facial height ratio (r= -0,766; p &lt;0.001). In all kinds of malocclusion, patients from Timis county show primarily a hypodivergent development pattern.

Chemical instability of liquid-repellent surfaces is one of the nontrivial hurdles that hinders their real-world applications. Although much efforts have been made to prepare chemically durable liquid-repellent surfaces, few attentions have been paid to exploit the instability for versatile use. Herein, we propose to create hydrophilic patterns on superhydrophobic surface by taking advantage of its chemical instability induced by acid solution treatment. Superhydrophobic Cu(OH)2 nanoneedles covered Cu plate that shows poor stability towards HCl solution (1.0 M) is taken as an example. Results show that 2.5 min of HCl solution exposure leads to the etching of Cu(OH)2 nanoneedles and partial removal of self-assembled fluoroalkyl silane molecular layer, resulting in the wettability transition from superhydrophobocity to hydrophilicity, and the water contact angle decreases from ~160° to ~30°. Hydrophilic dimples with different diameters are then created on the superhydrophobic surfaces by depositing HCl droplets with different volumes. Afterwards, the hydrophilic dimple patterned superhydrophobic surfaces are used for water droplet manipulations, including controlled transfer, merging and nanoliter droplets deposition. The results thereby verify the feasibility of creating wettability patterns on superhydrophobic surfaces by using their chemical instability towards corrosive solutions, which broadens the fabrication methods and applications of functional liquid-repellent surfaces.

With the increase of global human activities, a large number of technogenic magnetic particles (TMPs) generated by industrial activities such as coal combustion, traffic and so on enter sediments on continental shelves. However, there is currently a lack of understanding of the spatiotemporal distribution of TMPs on continental shelves, as well as the sedimentary effects they cause. This review work comprehensively analyzes the source, morphology, composition, and spatiotemporal distribution characteristics of TMPs. Then it elucidates their magnetic contribution to sedimentary environments in continental shelf seas, as well as the influence of heavy metals and active iron. At the same time, the existing problems and future development directions of TMPs on continental shelves are summarized.

This paper focuses on the impact that urban traffic has on the environment. The study characterizes the global effect of GHG emissions, including the ecologic evaluation and the characterization, normalization, and evaluation factor. The work makes a detailed survey of the different modes of driving and their influence on engine performance as one of the principal causes of gas emissions during the combustion process. The article analyzes six types of vehicles equipped with different engine configurations: diesel and gasoline, GLP and GNC, hybrid electric, and plug-in hybrid electric. Simulation of the driving mode under various operational conditions for every type of engine results in energy consumption, thus, in GHG emissions, carbon dioxide and monoxide, nitrogen oxides, and Sulphur dioxide. The study concludes that a reduction in vehicle speed, thus in the engine revolutions, has positive effects on engine combustion and gasses emissions, which is reduced by 27.5%. The study also concludes that the limitation in driving mode, avoiding sharp and sudden acceleration, may reduce up to 45% of GHG emissions. The changes applied in the driving mode improve the air quality in the urban environment, reducing the content of GHG from 39% to 61%.

Currently, Pythagorean fuzzy sets (PFSs) have been widely applied in various fields due to their substantial advantages in expressing and dealing with uncertainty. However, measuring the similarity and difference between PFSs effectively remains an unresolved issue. Inspired by Tanimoto similarity, we propose a novel set of similarity and distance measures for PFSs. We delve into the theoretical properties of the proposed measures and compare it with existing PFSs measures. Numerous numerical examples validate their rationality and effectiveness. Furthermore, our experimental findings suggest that in contrast to existing measures, the introduced measures successfully circumvent various counter-intuitive issues encountered by current measures, and yield more pronounced outcomes in the discrimination of different fuzzy sets. This enhances the uniqueness and superiority of our measures. Finally, we developed two decision models based on the proposed measures and validated their applicability in three applications.

Mountain ecosystems are crucial for global biodiversity conservation. However, their landscape features are constantly changing owing to urban expansion. Understanding the relationships between biotic communities and landscape features is essential for biodiversity conservation. This study aimed to examine the effect of land-cover type on avian communities in Lishui, a mountainous urban area in eastern China. Avian surveys were conducted using a total of 168 line transects across different land-cover types once per season from December 2019 to January 2021. We assessed the diversity of bird communities by calculating various metrics at both taxonomic and functional levels. Among the land-cover types measured, woodland, built-up land, cultivated land, and water bodies significantly influenced bird community diversity and composition. Species richness, species abundance, and functional richness were negatively correlated with the proportion of woodland but positively correlated with the proportion of non-natural land cover, such as built-up and cultivated land. In contrast, functional evenness was positively correlated with the proportion of woodland and grassland but negatively correlated with the proportion of non-natural land cover. Land-cover type also exhibited significant correlations with avian functional characteristics such as diet, foraging strata, and body mass, thereby influencing the overall community structure. Our results indicated that mountainous landscape patterns substantially affect avian communities. Different land-cover types possess varying resource endowments that affect the distribution of avian species. Therefore, urban landscape planning in mountainous areas should carefully consider the various functions provided to organisms by different types of land cover to promote biodiversity.

This research delves into the realm of predictive modeling within artificial intelligence (AI) and introduces an innovative ensemble approach designed to enhance prognostic precision. The proposed methodology, characterized by its ebullient nature, leverages the collective wisdom of diverse predictive models, synthesizing a comprehensive and robust framework. The pursuit of parsimony are paramount, underscoring the need for efficient model architectures that balance predictive acuracy and computational efficiency. Our study meticulously explores the amalgamation of diverse algorithms, encapsulating the intrinsic complexity of real-world phenomena. We navigate the intricate landscape of feature selection, algorithmic diversity, and model combination, fostering a holistic understanding of the prognostic process. The ebullient ensemble emerges as a dynamic solution, harnessing the synergy of constituent models while mitigating the risk of overfitting. To validate the efficacy of our approach, extensive experiments are conducted on diverse datasets, spanning domains such as healthcare, finance, and natural language processing. Comparative analyses demonstrate the superior predictive performance of our ensemble model in comparison to individual algorithms and traditional ensemble methods. Additionally, we delve into interpretability aspects, elucidating the underlying mechanisms that contribute to the model's prognostic prowess. Our research advances the frontier of predictive modeling in AI, offering a nuanced and sophisticated paradigm for prognostication. The ebullient ensemble approach stands as a testament to the synergy achievable through the amalgamation of diverse predictive models, providing a pragmatic and parsimonious avenue for enhanced prognostic acuracy in artificial intelligence applications.

The field of nephrology has recently directed a considerable amount of attention towards the stimulator of interferon genes (STING) molecule since it appears to be a potent driver of chronic kidney disease (CKD). STING and its activator, the cyclic GMP-AMP synthase (cGAS) are among the most relevant inducers that promote the expression of type I interferons (IFN-Is). These cytokines have been long recognized as part of the mechanism used by the innate immune system to battle viral infections; however, their involvement in sterile inflammation remains unclear. Mounting evidence pointing to the involvement of the IFN-I pathway in sterile kidney inflammation provides potential insights into the complex interplay between the innate immune system and damage to the most sensitive segment of the nephron, the glomerulus. The STING pathway is often cited as the cause of renal disease originating from non-infection related caused by the induction of IFN-I expression. However, other receptors have been implicated in this process, mainly by recognizing host-derived nucleic acids. This review explores the main endogenous inducers of IFN-I in glomerular cells, discusses what exposure to the main autocrine and paracrine cytokines has on these cells, and identifies the pathways that are implicated in the development of glomerular damage.

Fermatean fuzzy sets (FFSs) are a versatile tool for handling uncertain problems and have shown great effectiveness in practical applications. However, many existing Fermatean fuzzy similarity measures exhibit counter-intuitive situations, making it challenging to accurately measure the similarity or difference between FFSs. To address this issue, several similarity and distance measures for FFSs are proposed, inspired by the Tanimoto similarity measure. The properties of the proposed measures are also explored, along with several comparative examples with existing measures for FFSs, which illustrate their superior performance in processing fuzzy information from FFSs. The proposed measures have effectively overcome the counter-intuitive challenges posed by many existing measures and significantly outperforms existing measures in differentiating different FFSs. Furthermore, we demonstrate the practical applicability of the proposed measures in solving pattern recognition, medical diagnosis and multiple-attribute decision-making problems.

A stable match, an intercuspated maxilla-mandible relation is the universally accepted goal for dental restorative interventions, yet the underlying sensorimotor mechanisms to achieve this goal in the natural jaw closure remains to be elucidated. Dentists have intuitively regarded peripheral sensory innervation from tooth contacts as a significant control element for jaw muscle actions, both in the state of health and in cases of pathological dysfunction. However, therapeutical interventions for reshaping the dental arch anatomy and jaw relations have not always been successful. Repetitive masticatory chewing cycles, swallowing, talking, as well as volitional jaw-opening and -closing involve stereotyped neural commands from the central nervous system that are modulated in reaction to the sensory afferent feedback from the peripheral neurons and their sensor organs. The aim of this article is to describe, on a fraction of a second time-scale, the minuscule tilts and kinematic events of mandible during the making of a stable match with maxilla. Evidence of the importance of tooth contacts as the sensorimotor motivation of each of the successive kinematic steps of the “mandible-meets-maxilla-narrative” are discussed.

In this study, we propose an augmentation method for machine learning based on relabeling data in caregiving and nursing staff indoor localization with Bluetooth Low Energy (BLE) technology. Indoor localization is used to monitor staff to patient assistance in caregiving and to gain insights into workload management. However, improving accuracy is challenging when there is a limited amount of sensor data available for training. In this paper, we propose a data augmentation method to reuse the Received Signal Strength (RSS) from different sensors by relabeling to the sensors with less samples resolving data imbalance. Standard deviation and Kullback-Leibler divergence between minority and majority class are used to measure signal pattern to find matching sensors to relabel. By matching sensors between classes, two variation of relabeling are implemented specifically full and partial matching. The performance is evaluated using real world dataset we collected for five days in a nursing care facility installed with 25 BLE beacons. Random Forest model is utilized for location recognition, and performance is compared using the weighted F1-score to account for class imbalance. By increasing the sensor data with our proposed relabeling method for data augmentation, we achieved higher minority class F1-score as compared to augmentation with Random Sampling, Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic Sampling (ADASYN). Our proposed method utilizes collected sensor data by leveraging majority class samples. Full matching demonstrated a 6 to 8% improvement from the original baseline overall weighted F1-score.

In order to analyze the spatial distribution characteristics of the cultural landscape of the Yangtze River (Nanjing section) and show the role of the Yangtze River culture in promoting regional economic development and cultural radiation, Based on the Knowledge graph technology and 3S technology, this paper conducts geographical positioning and spatial analysis of the Yangtze River cultural landscape in Nanjing, and analyzes the surrounding environment by combining remote sensing images and topographic data. Researches show that: The Yangtze River cultural landscape in Nanjing includes 74 landscape points of seven landscape types, and the distribution of landscape points shows a clustering trend, but the spatial distribution and aggregation degree of different types of cultural landscapes are different. Due to the influence of climate environment and water resources distribution, the surrounding cultural landscape has a low altitude and high vegetation coverage, showing obvious distribution characteristics along the river. This study is helpful to improve the coordination degree between cultural landscape protection and planning management, and can provide useful reference for the protection of cultural landscape of the Yangtze River.

Membrane filtration is a popular choice in the treatment of wastewater for reuse. However, when used to produce clean water, these devices are subject to concentration polarization and fouling, which inhibit their ability to operate efficiently and provide high-quality permeate streams. Patterned membrane surfaces offer a hydrodynamic approach to mitigating concentration polarization and the surface fouling that follows. However, when subject to a steady feed flow rate, surface patterns generally produce stagnant zones in cavity-like spaces where particulate from the bulk flow recirculates in stationary vortices. To prevent aggregation in these recirculation zones, and therefore the onset of surface fouling, we study a rapidly pulsed feed flow. When combined with cavity-like geometries, such as the valleys present in membrane surface patterns, a rapidly pulsed flow generates mixing mechanisms (i.e., the deep sweep and the vortex ejection) that disrupt otherwise stagnant regions. First, we confirm the existence of these mechanisms, which are typically induced in impermeable cavities at relatively low Reynolds numbers, for near transitional feed Reynolds numbers in permeable cavity spaces via numerical simulation of the flow field. Following this confirmation, we demonstrate the ability of these mechanisms to remove particles trapped in recirculation zones via massless particle tracking studies. The results of this work suggest that when combined with a rapidly pulsed inlet flow, patterned membrane surfaces can not only alleviate concentration polarization and the surface fouling that follows but also reduce the need for traditional cleaning methods, which require operational downtime and often involve the use of abrasive chemical agents.

(1) Background: During physical exercise, ventilation (VE) adapts to the intensity and characteris-tics of the effort. The breathing pattern is defined as the relationship between the tidal volume (VT) and breathing frequency (BF) for a given VE. The aim of this study was to evaluate whether inspiratory muscle training influenced the response of the breathing pattern during an incremen-tal effort in amateur cyclists. (2) Methods: 18 amateur cyclists completed an incremental test to exhaustion with gas analysis on a cycle ergometer and spirometry. Cyclists were randomly as-signed to two groups (IMTG=9; CON=9). The IMT group completed 6 weeks of inspiratory muscle training (IMT) using a PowerBreathe K3® device at 50% of the maximum inspiratory pressure (Pimax). The workload was adjusted weekly. After the 6-week intervention, the cyclists repeated the incremental exercise test with gas analysis and spirometry. The response of the breathing pat-tern was evaluated during the incremental exercise test. (3) Results: Pimax increased in the IMTG (p<0.05; +19.62%). Variables related to the breathing pattern response showed no differences be-tween groups after the intervention (EXPvsCON; p>0.05). Likewise, no differences were found in the IMTG after training (PREvsPOST; p>0.05). (4) Conclusions: IMT improved the strength of in-spiratory muscles and sports performance in amateur cyclists. These changes were not attributed to alterations in the response of the breathing pattern.

The aim of this study was to examine the relationship of the distance between the apex tip of the upper central tooth (U1A) and the anterior nasal spine (ANS) and the nasal floor (NF) with the vertical cephalometric values using cone-beam computerized tomography (CBCT). A total of 122 patients who applied to Department of Orthodontics between January 2011-June 2019 were included. On the CBCT’s, distances between the U1A and the NF and ANS were measured. Statistical significance was considered as p&lt;0.05. Of 122 individuals 73.8% (n=90) were female and 26.2% (n=32) were male with an mean age of 22,8±3,3 years. A statistically significant moderate positive correlation was found between the NF-U1A mean values and the measurements of N-Me, ANS-Me and ANS-Gn, S-Go, and N-ANS measurements (p &lt;0.01). A statistically significant positive correlation was found between the ANS-U1A mean values and Ar-Go-Me, total posterior angles, N-Me, SN/GoGn and Y-axis angle, ANS-Me and ANS-Gn (p &lt;0.01). In this study, we found that the distance of U1A from ANS and NF points was related to orthodontic vertical direction parameters. It was demonstrated that the ANS-U1A and NF-U1A points can serve as reference points for identifying the orthodontic vertical growth pattern on CBCT scans.

Forest-grass intercropping patterns of protected cultivation has been widely used to increase productivity and sustainability in modern agriculture. However, there have been few studies of wolfberry (L. barbarum) intercropping and it is cultivated mostly by clean tillage. This paper takes 10 kinds of wolfberry-forage intercropping patterns, compares the effects of different planting modes on the growth, yield, photosynthetic characteristics, nutritional quality, and the degree of occurrence of diseases and pests, which aims to make clear the effects of wolfberry-forage intercropping patterns on wolfberry. The results showed that different intercropping combinations had different effects on wolfberry. The overall effect of Wolfberry-forage intercropping patterns on the growth of wolfberry were promote the photosynthetic characteristics. Ryegrass could increase the branch number, Lvyuan 5 and mangel increase branch length; Mangel, clover, sweet sorghum, ryegrass and stipas could reduce the damage of powdery mildew by 69%, and alfalfa, stipa and ryegrass could reduce the occurrence of aphids by 67% (P<0.05). Intercropping could increase carotenoids, flavonoids and ascorbic acid contents to improve wolfberry quality by 21%, 53% and 127%, respectively (P<0.05). Among all the performances, wolfberry-mangel intercropping has absolute advantages in promoting wolfberry yield and quality increase. Therefore the best patterns of wolfberry-mangel, wolfberry-ryegrass, wolfberry-alfalfa and wolfberry-clover were chosen.

Background: Poisoning is a challenging medical condition facing health care providers, as it usually results in serious outcomes in terms of morbidities or mortalities. Poisoning is a challenging medical condition facing health care providers, as it usually results in serious outcomes in terms of morbidities or mortalities. The lack of or inadequate information about the circumstances, substances and populations at risk are considered barriers to the actual prevention of poisoning and effective intervention strategies in Saudi Arabia. The aim of the current study was to describe the pattern and determinants of chemical and drug overdose poisoning in Makkah.Subjects and methods: All reports of chemical and drug overdose poisoning delivered to the Environmental Health and Occupational Safety Department in Makkah over two years (2018-2019) were reviewed.Results: The total number of cases reported in 2018 was 209 cases, while it reached 42 cases in 2019. The overwhelming majority of the cases were Saudi (91.6%), with a slight predominance of males (57.4%) over females (42.6%). Generally, almost two-thirds of the cases occurred in children below 13 years (61.4%), most of the poisoning cases resulted from drug overdose (63.3%), while 34.7% were chemical poisoning. The most common drug poisoning was attributed to analgesics followed by antiepileptics, antihypertensive drugs, antipsychotics and antimicrobials, while cleaning and detergent agents were the most commonly poisoned chemicals. The majority of these agents were taken by the oral route. Children's chemical poisoning was significantly higher than that in older age groups (p<0.05). All intentional poisoning occurred in adults; the great majority of them (88.9%) used drug overdosing rather than chemical substances.Conclusion and recommendations: The current study results are consistent with most of the previous studies carried out in different regions of Saudi Arabia. Further in-depth studies are needed to elaborate other social and demographic factors associated with chemical and drug overdose poisoning. Public health plans, policies and legislations should be implemented to reduce these factors. Intensive supervision of children is needed. Suicidal poisoning patients should seek psychiatric help to limit the possibility of attempting suicide again in the future. Furthermore, efforts are needed to plan and implement health education programs about the factors proven in the current study to be significantly related to chemical and drug overdose poisoning.

The understanding of structural alteration mechanisms due to relative humidity impact on organic supports of paintings is of crucial significance for the preventive conservation strategies in order to ensure the long-term preservation of important cultural identity artworks. The effort in this paper is to simulate Museum realistic relative humidity condition in a climate chamber while monitoring the structural responses through a quantitative interferometric method allowing the quantitative correlation between the physical values of deformation and mass alteration relevant to relative humidity fluctuations.

In Poland, the mountainous and hilly regions until recently were territories with unbalanced and poor diet quality, especially in early spring. Wild edible plants were or still are influential in supplementing a human diet. One of the earliest wild edible plants to appear in the growing season, characteristic of a broad swath of Europe from Ukraine to Germany, remains wild (bear) garlic (Allium ursinum L.). This paper assesses the impact of the vegetation site and preservation methods on selected parameters of the chemical composition of bear garlic. In addition, the connection between its genome pattern and chemical composition was assessed. The plants were collected in three locations in the Carpathian foothills, and the reference sample was plants collected in the lowlands. The site from which the raw material was harvested has a statistically significant effect on the chemical composition of the preserved leaves of bear garlic. The profiles of the analysed components differed in the material from a different site. Bear garlic leaves from mountainous areas had more analyzed components than those obtained from the lowland sites. Moreover, the material from the lowlands had a different genetic pattern from the leaves from the mountainous areas..

This work introduces an innovative approach that unites a PIDND2N2 controller and the balanced arithmetic optimization algorithm (b-AOA) to enhance the stability of an automatic voltage regulator (AVR) system. The PIDND2N2 controller, tailored for precision, stability, and responsiveness, mitigates the limitations of conventional methods. The b-AOA optimizer is obtained through integration of pattern search and elite opposition-based learning strategies into the arithmetic optimization algorithm. This integration optimizes the controller parameters and the AVR system's response, harmonizing exploration and exploitation. Extensive assessments, including evaluations on 23 classical benchmark functions, demonstrate the efficacy of the b-AOA. It consistently achieves accurate solutions, exhibits robustness in addressing a wide range of optimization problems, and stands out as a promising choice for various applications. In terms of AVR system, comparative analyses highlight the superiority of the proposed approach in transient response characteristics, with the shortest rise and settling times and zero overshoot. Additionally, the b-AOA approach excels in frequency response, ensuring robust stability and a broader bandwidth. Furthermore, the proposed approach is compared with various state-of-the-art control methods for the AVR system, showcasing impressive performance. These important results underscore the significance of this work, setting a new benchmark for AVR control by advancing stability, responsiveness, and reliability in power systems.

The study on the temporal duration of optically observed spiral patterns in disc galaxies is based on the finite reservoir of hydrogen available with no replenishment following the initial formation of these well-isolated galaxies. The results reveal a gradual decline in observable spiral arms regardless of any spiral arm formation mechanism. This reduction occurs after half-loop rotations (as defined in the paper) as hydrogen reserves deplete, hindering new star formation. Ultimately, spiral patterns may possibly become optically invisible at normal conditions after a full-loop rotation (as defined in the paper) due to hydrogen depletion, even if the formation mechanism remains active. This supports the idea of short-lived spiral patterns compared to the lifespan of the spiral galaxies. The spiral arm formation may occur once in a galaxy's life based on the limited availability of hydrogens. A concise, universally applicable mechanism for spiral arm formation across various disc galaxies should exist which provides a single mathematical formula to describe the broad range of morphologies of the spiral arms with few adjustable parameters. Some exceptions may be explained within this framework. Furthermore, the observed data on spiral pattern and galactic bar rotation speeds in the Milky Way require rigorous verification, particularly concerning the winding problem.

This article provides a general overview of the bio-inspired computing method called DNA-Based Computing (DBC), including its theory and applications. The main theme of DBC is the central dogma of molecular biology (once information of DNA/RNA has got into a protein, it can’t get out again), i.e., DNA to RNA (sequences of four types of nucleotides) and DNA/RNA to protein (sequence of twenty types of amino acids) are allowed, not the reverse ones. Thus, DBC transfers few-element information (DNA/RAN-like) to many-element information (protein-like), solving a given cognitive problem. DBC can take many forms; this article elucidates two main forms, denoted as DBC-1 and DBC-2. Using arbitrary numerical examples, it is shown that DBC-1 can solve the following cognitive problems: “similarity indexing between seemingly different but inherently identical objects” and “recognizing regions of an image separated by a complex boundary.” DBC-2 can solve the following cognitive problem: “pattern recognition when the relevant information is insufficient.” Smart manufacturing-based systems (digital twins and big data analytics) must solve the abovementioned problems to make the manufacturing enablers (machine tools and monitoring systems) more self-reliant and autonomous. Consequently, DBC can improve the cognitive problem-solving ability of smart manufacturing-relevant systems and, thereby, can enhance its biologicalization.

The water resources carrying capacity (WRCC) system comprises multiple complex and nonlinear interactions related to society, economy, water resources and the water environment. A full understanding of its internal mechanism is conducive to the further improvement of the regional WRCC. This article focuses on the temporal and spatial variability of WRCC to explore a method of dynamic successive assessment. Firstly, the Pressure-State-Response (PSR)framework is used to develop a systematic and causal indicator system. Then, The Variable Fuzzy Pattern Recognition (VFPR) model and an analytic hierarchy process-entropy (AHP-E) model are combined to successively and dynamically assess WRCC. The proposed method is applied to the dynamic successive assessment of WRCC in Hebei Province, and it is obtained that the poor water resources carrying capacity in Hebei Province is mainly due to the basic attribute of the decision of the water resources shortage, but Hebei Province actively adopts a variety of measures to save water and pressurize mining, which makes the province's water resources carrying capacity have a tendency to become better gradually. At the same time, the system dynamics model (SD) of water resources carrying capacity based on the analysis of the model structure was established. Moreover, three scenarios were designed, including existing continuation, high-efficiency water-saving, cross-regional water transfer and coordinated development, each scenario divided into high and low-speed economic development and population growth schemes, then total 6 schemes between 2023 and 2030 were simulated and predicted respectively. The results indicate that if the current development model is adopted, the water resource carrying capacity will continue to maintain low levels. It was concluded that the high-speed development of economy and population, the efficient water conservation and inter-basin transfer scenario (scenario 2 with high-speed) is the best choice for sustainable development of water resources and social economy in Hebei.

Rapid urbanization has led to many ecological problems such as landscape fragmentation, decreased landscape connectivity, and decreased biodiversity. Building an ecological security pattern is an important way to ensure ecological security and maintain sustainable urban development. Harbin is an important large-scale city in northeastern China, and the urban central district of Harbin is used as the study area. Ecological sensitivity assessment, MSPA, gravity model, landscape connectivity assessment and MCR model were used to extract ecological source areas, ecological corridors and ecological nodes in the study area to construct and optimize the ecological security pattern. Research shows that: A total of 23 ecological source areas were identified, mainly located along the Songhua River in the central part of the study area and in the mountain forest areas within the A-cheng District in the southeastern part of the study area. 48 ecological corridors were extracted, mainly in Daowai District, A-cheng District and the eastern part of Xiangfang District. There are 8 important ecological corridors and 10 important connecting corridors. 61 ecological nodes of the first level and 65 ecological nodes of the second level were extracted. High, higher, medium, lower and low security areas were classified based on the minimum cumulative resistance surface, with the highest proportion of high ecological security areas accounting for 45.75% of the study area. 65 ecological breakpoints were extracted and restoration measures were proposed. Finally, The structure of the ecological security pattern optimization of "two axes, two belts and four areas" is proposed, and corresponding ecological management measures are put forward. The experimental system of this study can provide new ideas for the construction of ecological security patterns in other regions and provide scientific support for the ecological sustainable development of similar urban areas.

Ship wave is of great interest for wave drag, coastal erosion and ship detection. In this paper, a highly-paralleled numerical scheme is proposed for simulating three-dimensional (3-D) nonlinear Kelvin ship waves effectively. First, a numerical model for nonlinear ship waves is established based on potential flow theory, boundary integral method and Jacobian-free Newton-Krylov (JFNK) method. In order to improve computational efficiency and reduce data storage of JFNK method, a banded preconditioner method is then developed by formulating the optimal bandwidth selection rule. After that, a Graphics Process Unit (GPU) based parallel computing framework is designed, and a GPU solver is developed by using Compute Unified Device Architecture (CUDA) language. Finally, numerical simulations of 3-D nonlinear ship waves under multiple scales are performed by using the GPU and CPU solvers. Simulation results show that the proposed GPU solver is more efficient than the CPU solver with the same accuracy. More than 66% GPU memory can be saved and the computational speed can be accelerated up to 20 times. Hence, the computation time for Kelvin ship waves simulation can be significantly reduced by applying the GPU parallel numerical scheme, which lays a solid foundation for practical ocean engineering.

Anthropogenic chemicals are fundamental to our standard of living in modern society. Unfortunately, some chemicals are persistent and can enter waste streams and ultimately the environment. Commonly used household products including pharmaceuticals and personal care products are an important source of contaminants. The aim of this study was to develop an “Up-the-pipe Solutions” framework to raise awareness about the presence and potential risks of chemicals found in household products to reduce their levels in waste streams or substitute them with less harmful alternatives. This approach based on The Natural Step framework and the concept of essentiality recognises the importance of engaging the community to raise awareness around the consequences of our daily activities and behavioural patterns that can lead to the release of persistent contaminants in main waste streams from the kitchen and bathroom and green wastes we generate.

A drinking strategy aiming to replace a given percentage of the sweat losses incurred during exercise should result in reproducible fluid intake volume and, hence, fluid balance from one exercise session to the other performed under similar scenarios. Whether this may also be the case with ad libitum drinking during exercise is unclear. We characterized the repeatability of ad libitum fluid intake during repeated 1 h exercise sessions and examine its effect over time on fluid balance and selected physiological functions and perceptual sensations. Twelve (3 women) healthy individuals participated in this study. At weekly intervals, they completed 4, 2 x 30 min walking/jogging exercise bouts (55% VO2max, 40°C, 20-30% relative humidity) interspersed by a 3 min recovery period. During exercise, participants replaced water (20°C) ad libitum. There were no significant differences among the 4 exercise sessions for absolute fluid intake volume (~ 1000 mL · h-1), percent body mass loss (~ 0.4%), sweat rate (~ 1300 mL · h-1) and percent of sweat loss replaced by fluid intake (~ 80%). Heart rate, rectal temperature and perceived thirst and heat stress did not differ significantly between the first and fourth exercise session. Perceived exertion was significantly lower during the fourth vs. the first exercise session, but the difference was trivial, &lt; 1 arbitrary unit. In conclusion, ad libitum fluid intake during 4 successive identical 1 h walking/jogging sessions conducted in the heat will result in similar fluid intake volumes and perturbations in fluid balance, heart rate, rectal temperature and perceived thirst, heat stress and exertion.

Recanalization poses challenge in coil embolization for cerebral aneurysms. Establishing predictive models for post-embolization recanalization is important for clinical decision-making. However, conventional statistical and machine learning (ML) models may overlook critical parameters during the initial selection process. In this study, we automated the identification of significant hemodynamic parameters using a PointNet-based deep neural network (DNN), leveraging their inherent 3D features. Further feature analysis was conducted utilizing saliency mapping, an explainable artificial intelligence (XAI) technique. The study encompassed the analysis of velocity, pressure, and wall shear stress (WSS) in both pre- and post-coiling models derived from computational fluid dynamic (CFD) simulations for 59 aneurysms. Velocity was identified as the most pivotal parameter, supported by the lowest P-value from statistical analysis and the highest area under the curves (AUROC)/precision-recall curves (AUPRC) values from DNN model. Moreover, visual XAI analysis revealed robust injection flow zones with notable impingement points in pre-coiling models, as well as pronounced interplay between flow dynamics and the coiling plane were important 3D features in identifying the recanalized aneurysms. The combination of DNN and XAI was found to be an accurate and explainable approach not only at predicting post-embolization recanalization but also at discovering unknown features in the future.

The Silk Road pattern (SRP) and Circumglobal teleconnection pattern (CGT) are two well-known teleconnection patterns along the Eurasian westerly jet during boreal summer, which are often regarded as one teleconnection pattern. In view of the distinct features of the SRP/CGT on the interannual (IA) and interdecadal (ID) timescales, the present study investigates the linkages and differences between the SRP and CGT on the two timescales. On the IA timescale, the SRP and CGT feature a similar circumglobal wave train structure with strong and significant centers over Eurasia, but show clear independences. Specifically, the SRP and CGT illustrates largely the mid-/high-latitude-related and tropics-related parts of the Northern Hemisphere upper-tropospheric circulation variations, respectively. Also, the CGT shows a stronger connection to the Indian summer monsoon (ISM) heating and El Niño–Southern Oscillation than the SRP, which makes the CGT more like a tropical-forcing-driven atmospheric mode but the SRP more like an internal atmospheric mode. The linkages and differences between them are associated with their asymmetry relationship during their positive and negative phases, which are attributed mainly to the asymmetry impact of the ISM heating/cooling on the Eurasian circulations. On the ID timescale, the SRP and CGT are characterized by a coherent two-wave train structure over Eurasia, and feature more like the same teleconnection pattern, which are associated with the Pacific Decadal Oscillation and Atlantic Multidecadal Oscillation. The present findings on the linkages and differences between the SRP and CGT are helpful to understand the variability and prediction of the SRP and CGT.

Pregestational and gestational diabetes mellitus are relevant complications of pregnancy and antidiabetic drugs are prescribed to obtain glycemic control and improve perinatal outcomes. The objective of this study was to highlight the prescription pattern of antidiabetics before, during and after pregnancy in Italy and to evaluate its appropriateness. A multi-database cross sectional population study using a Common Data Model was performed. In a cohort of about 450,000 women, the prescribing profile of antidiabetics seemed to be in line with the Italian standards for the treatment of GDM which currently do not recommend the use of oral antidiabetics and non-insulin injection, even if a small share of new users (up to 3.8% in the third trimester) used oral antidiabetics. A substantial variability in the prescription pattern was observed among the Italian regions considered: the highest increase was registered in Tuscany (4.2%), Umbria (3.5%) and Emilia-Romagna (2.6%) while the lowest in Lombardy (1.5%), Veneto (1.7%) and Apulia (1.7%). Analysing the prevalence of use of antidiabetics between foreign women we observed that the consumption during pregnancy was higher than Italians (second trimester: 1,8% vs 0,9%, third trimester: 3,6% vs 1,8%).

Different bone bruise patterns observed on magnetic resonance imaging (MRI) after non-contact anterior cruciate ligament (ACL) rupture and lateral patellar dislocation may indicate different injury mechanism of knee. In order to investigate the typical bone bruising patterns after ACL rupture and patellar dislocation. In this study, 77 ACL rupture and 77 patellar dislocation patients’ knee MR images with bone bruises between August 2020 and March 2022at our institution were selected and analyzed, respectively. Sagittal and transverse planes images were used to determine the bone bruise location in the lateral-medial and superior-inferior directions of the MR images. The presence, location, and intensity of the bone bruises within specific compartments of the femur and tibial after ACL rupture and patellar dislocation were recorded. Relative bone bruise patterns of the ACL rupture and patellar dislocation were classified and analyzed. Results showed that there were 4 kinds of bone bruise (1-,2-,3-,4- bone bruises) patterns after ACL rupture. The most common two patterns after ACL rupture were 3- bone bruises (including lateral side of femur and both lateral and medial side of tibia, LF+BT; both lateral and medial side of femur and lateral side of tibia, BF+LT, medial side of femur and both lateral and medial side of tibia, MF+BT) followed by 4- bone bruises (both lateral and medial side of femur and tibia, BF+BT), 2- bone bruises (LF+LT, lateral side of femur and tibia; MF+LT, medial side of femur and lateral side of tibia; LF+MT, lateral side of femur and medial side of tibia; MF+MT, medial side of femur and tibia; 0+BT, both lateral and medial side of tibia;), and 1- bone bruise (0+LT, only lateral side of tibia). There was only 1 pattern bone bruise (latera femur and medial patella bone bruise) of patellar dislocation, the most common pattern of patellar dislocation was in the inferior medial patella and lateral anterior inferior femur. The results suggest that the pattern of bone bruise after ACL rupture and patellar dislocation is completely different. There were 4 kinds of bone bruise patterns after non-contact ACL rupture while there was only 1 kind of bone bruise pattern after patellar dislocation bone bruise patients which was in the inferior medial patella and lateral anterior inferior femur.

The goal of this paper is to fabricate innovative diaphragm headphones using graphene oxide paper (GOP) and GOP/epoxy nanocomposites (GOPC). Initially, graphene oxide suspension is fabricated, and the vacuum filtration method is adopted to make GOP. Then vacuum bag molding is used to fabricate GOPC from GOP. Hot pressing and associated molds are adopted to fabricate line-indented (GOPC-L) or curve-indented patterns (GOPC-C) on the GOPC. The performance of one kind of GOP and three kinds of GOPC diaphragm headphones is analyzed based on their sound pressure level (SPL) curves achieved by the Soundcheck measurement system. There are four important processing parameters that will influence the performance of the diaphragm, including material type GOP versus GOPC, indented pattern type, sonication time on suspension, and graphene weight fraction in suspension. Compliances of various diaphragms are measured by the Klippel LPM laser measurement system. The results indicate that effects of sonication time and graphene weight fraction on SPL of GOP and GOPC headphones are in reverse, and this is associated with their difference on compliance (modulus), mass, damping ratio, and microstructure uniformity. Either GOPC-L or GOPC-C seems to improve the microstructure of the GOPC, and leads to better SPL performance. The correlation between the previous four factors and SPLs of four kinds of diaphragm headphones is proposed by using scanning electron microscope (SEM) to examine the microstructure of these diaphragms.

Since there are no morphological clues capable of making a pathologist suspect a possible mammary origin of a metastatic lesion without adequate clinical information, the histologic diagnosis of brain metastasis from BC is still based on the immunohistochemical expression of mammary gland markers such as GATA-3, ERs, PgRs and HER-2. The present retrospective study aimed to select purely morphological features capable to suggest the mammary origin of a metastatic carcinoma to the brain. The following histological features were collected on a series of 30 cases of brain metastases from breast cancer:(i) solid growth pattern; (ii) presence of comedonecrosis; (iii) glandular differentiation. Our results showed that most cases histologically exhibited solid growth pattern with at least focal comedonecrosis, producing an overall morphology closely reminiscent of mammary high-grade ductal carcinoma in situ. Although the above-mentioned morphological parameters are not strictly specific to a mammary origin, they may have an important diagnostic utility in leading pathologists to suspect a possible breast primary tumor and to include GATA-3, ERs, PgRs and HER-2 to the immunohistochemical panel.

Land use and land cover (LULC) datasets for Jinan in 1992, 1998, 2002, 2006, 2011, 2017, and 2022 were developed from Landsat images using the Random Forest (RF) classification approach. The relationships between social-economic, political factors and time-series LULC data were exam-ined for the periods between 1992 and 2022. The results showed the effectiveness of using the RF classification method for LULC classification with time series of Landsat images. Combined with driving forces analysis, our research can effectively explain the detailed LULC change tra-jectories corresponding to different stages and give new insights into Jinan LULC change pat-terns. The results show a significant increase in impervious surface which opposite change to bare land which experienced a huge decline declined by 95%, due to urbanization and rapid in-crease of population. The driving forces behind these changes are related to population growth, economic development, and climate change. Moreover, the present research employed Principal Components Analysis (PCA) methodology in order to understand the relative significance of disparate driving factors. The analysis results prove that the economy (population, GDP) and climate change were the primary factors that have an obvious impact on land use/land cover changes and that the driving factors for impervious surface, bare land, woodland, farmland, and water were distinct. Government policies also have a substantial impact on LULC change as well, such as the Construction of Harmonious Jinan (COHJ). The results were helpful for better understanding the mechanisms of LULC change and can provide useful knowledge for effective land resource management and planning.

The popularity of online retail is followed by decreasing transactions at shopping centres. Leisure and companionship trips to restaurants and cafés are replacing the frequency of intra-urban shopping trips. Several studies demonstrated a notable trend in urban commercial areas, wherein functionality has shifted from shopping centres to primarily focused on restaurants and cafes. Leisure and companionship places in the urban south have greater diversity than formal restaurants and cafés. This article employs a comprehensive framework to examine the categorization of restaurants and cafés in the urban south, referred to as food services. This study aims to investigate the spatial pattern of food service in Surabaya and ascertain whether there is a concentration of all food service variants around existing shopping centres. This research employs the POI of food service units gathered through web scraping from Google Maps. Applying the k-means cluster analysis demonstrates that the spatial pattern of food services is categorized into several distinct clusters. This article discloses five types of urban spaces characterized by varying compositions of food service variants within them. These spaces include the city centre, sub-city centre, areas along main roads, residential neighbourhoods, and peri-urban areas.

The accuracy of estimating changes in terrestrial water storage (TWS) using Gravity Recovery and Climate Experiment (GRACE) level-2 products is limited by the leakage effect resulting from post-processing and the weaker signal magnitude in adjacent areas. TWS anomaly in Dnieper River basin, where characteristic with medium scale and adjacent weak TWS anomaly, is estimate in this work. Two categories of leakage error repaired method (including forward modeling, Data-driven, single and multiple scaling factor) are employed. Root mean square error (RMSE) and Nash-Sutcliffe Efficiency (NSE) are used to evaluate the efficiency of methods. Compare to independent methods, TWS anomaly inverted by multiple scaling factor depending on CPC Soil Moisture model is more accurate in terms with RMSE 2.32 and NSE 0.88, which scaling factors corresponding to trend term 1.02, annual term 1.04, and semi-annual term 1.14. Further, comprehensive climate insights behind of the TWS anomaly were confirmed. The temperate continental climate of this River basin is shown, according to the variation of TWS anomaly in spatial domain. Snowmelt is significant role in TWS anomaly of Dnieper River basin, which is accord with the precipitation record and the 14 years temperature spatial distribution of February. Overall, we compare TWS anomaly recovered by single and multiple scaling method, the leakage signal originates mainly from semi-annual term of the TWS anomaly.

Nowadays, brain signal processing is performed rapidly in various brain-computer interface (BCI) applications. Most researchers focus on developing new methods for the future or improving the basic implemented models to identify the optimum standalone feature set. Our research focuses on four ideas. One of them introduces future communication models, and the others are for improving old models or methods. These are: 1) new communication imagery model instead of speech imager using the mental task: Due to speech imagery is very difficult, and it is impossible to imagine sound for all of the characters in all of the languages. Our research introduces a new mental task model for all languages that call Lip-sync imagery. This model can use for all characters in all languages. This paper implemented two lip-sync for two sounds, characters or letters. 2) New combination Signals: Selecting an inopportune frequency domain can lead to inefficient feature extraction. Therefore, domain selection is so important for processing. This combination of limited frequency ranges proposes a preliminary for creating Fragmentary Continuous frequency. For the first model, two s intervals of 4 Hz as filter banks were examined and tested. The primary purpose is to identify the combination of filter banks with 4Hz (scale of each filter bank) from the 4Hz to 40Hz frequency domain as new combination signals (8Hz) to obtain well and efficient features using increasing distinctive patterns and decreasing similar patterns of brain activities.3) new supplement bond graph classifier for SVM classifier: When SVM linear uses in very noisy, the performance is decreased. But we introduce a new bond graph linear classifier to supplement SVM linear in noisy data. 4) a deep formula recognition model: it converts the data of the first layer into a formula model (formula extraction model). The main goal is to reduce the noise in the subsequent layers for the coefficients of the formulas. The output of the last layer is the coefficients selected by different functions in different layers. Finally, the classifier extracts the root interval of the formulas, and the diagnosis does based on the root interval. For all of the ideas achieved the results of implementing methods. The results are between 55% to 98%. Less result is 55% for the deep detection formula, and the highest result is 98% for new combination signals.

Arid- and semi-arid Central Asia is particularly sensitive to climate change. The changes in extreme precipitation in Central Asia stemming from climate warming are the subject of intense debate within the scientific community. This study employed a Morlet wavelet analysis to examine the annual occurrence number of extreme precipitation in Central Asia from May to September during the period of 1951–2005. Their modulating planetary-scale climate modes were identified by using a linear regression analysis. Two major scales of the temporal variability were derived: 2–3.9 yr and 4–6 yr. The dominant variability was 2–3.9-yr scale and was associated with the negative phase of the Polar/Eurasia (POL) pattern. The 4–6-yr scale provided a secondary contribution and was closely linked to the negative phase of the North Atlantic Oscillation (NAO). These planetary climate modes acted as precursors of extreme precipitation over Central Asia. The negative phase of POL directly contributed to a negative height anomaly over Central Asia, which was intimately related to extreme precipitation. In contrast, the negative NAO phase possibly manifested as a Rossby wave source, which was subsequently exported to Central Asia through a negative–positive–negative Rossby wave train.

The extensive utilization of rebar during the construction of the project generates immense rebar waste, leading to increased construction costs and significant greenhouse gas emissions. Various approaches have been explored focusing on the minimization of rebar-cutting waste, such as optimizing cutting patterns, lap splice position, and special-length rebar utilization. Nonetheless, reducing rebar usage by minimizing the number of splices remains uninvestigated. In response to these issues, a two-stage optimization algorithm was developed, prioritizing special-length rebar to achieve near-zero rebar-cutting waste of less than 1% and concurrently reduce rebar usage, thereby promoting sustainable construction practices. The two-stage algorithm presented in this study involves the optimization of the lap splice position for the continuous rebar with a reduction of splices number. Furthermore, it integrates a special-length minimization algorithm for the additional rebars. Applying the algorithm to beam structures in a small-sized factory building project led to a notable reduction of 29.624 tons of rebar, equivalent to 12.31% of the total purchased quantity. Greenhouse gas emissions were reduced by 102.68 tons, and associated costs decreased by USD 30,256. A rebar-cutting waste of 0.99% which is near zero was achieved. These findings highlight the significant potential of the proposed algorithm in reducing rebar waste and facilitating sustainable construction practices. In addition, the application of the proposed algorithm in reinforced concrete construction projects will amplify the associated advantages accordingly.

Life in the modern century is heavily reliant on an enormous amount of electricity consumption as technology has become the most integral part of daily life. In this context, smart grid systems play a pivotal role to maintain the uninterrupted power supply which needs to be monitored in a timely fashion to keep track of the electric consumers’ usage pattern. The smart meter is the one of smart applications of the smart grid that collects huge amounts of consumer load data on a daily basis which has become a focus for various researchers and analyzers to study load characterization. In this paper, an approach has been proposed to recognize the energy consumption patterns among diverse types of consumers ranging from residential to industrial levels. This approach is worth considering not only for load pattern recognition but also for involving customers in different events such as demand response or peak shaving. In such a way, this analytical mechanism certainly assists in reducing power wastage and saving costs. The proposed methodology is based on a two-fold clustering algorithm with the use of state-of-the-art technology, machine learning. The primary goal is to classify electric customers' data collected from smart meters. Then, analyzing the classified results with an aim to predict power consumption patterns for the customers in the future and making the right energy policy that will benefit both the grid operator and consumers as well.

Knowledge on the health of banana trees is critical for farmers to profit from banana cultivation. Fusarium wilt and banana blood diseases (BDB), two significant diseases infecting banana trees, are caused by Fusarium oxysporum and Ralstonia syzygii, respectively. They have successfully caused a decline in crop yield as they destroy the trees, starting sequentially from the pseudostem to the fruits. The entire distribution of BDB and Fusarium on a plantation can be understood using advanced geospatial information obtained from multispectral aerial photographs taken using an unmanned aerial vehicle (UAV), combined with the reliable data field of infected trees. Vegetation and soil indices derived from a multispectral aerial photograph, such as normalized difference vegetation index, modified chlorophyll absorption ratio index, normalized difference water index (NDWI) and soil pH, may have to be relied on to explain the precise location of these two diseases. In this study, a random forest algorithm was used to handle a large dataset consisting of two models: the banana diseases multispectral model and the banana diseases spectral model. The results show that the soil indices, soil pH and NDWI are the most important variables for predicting the spatial distribution of these two diseases. Simultaneously, the plantation area affected by BDB is more extensive than that affected by Fusarium, if the variation of planted banana cultivars is not considered.

In the investment casting process, the pattern made of wax is obtained in a die for further formation of shell mold. This work investigates commercial pattern waxes fluidity with a newly developed injection fluidity test. A good correlation between wax fluidity and its viscosity is observed, which is different from metallic alloys, where the solidification behavior is more critical. The difference in investigated filled waxes fluidity can be associated with the type and amount of filler.

The time when a patient has mild cognitive impairment (MCI) is an important period for delaying the onset of dementia and has been the main target of dementia prevention research in recent years. The purpose of this study was to investigate the dietary intake and dietary patterns of MCI patients in Taiwan. In total, 40 subjects were enrolled in this cross-sectional study that was conducted from July 2019 to September 2021 at Linkou Chang Gung Memorial Hospital. Results of the clinical dementia rating (CDR) and mini-mental state examination (MMSE) were obtained from medical records. Participants were divided into two groups: a healthy group (MMSE ≥ 26 points, CDR=0) and an MCI group (MMSE ≥ 26 points, CDR=0.5). Results indicated that the MCI group had significantly higher copper and lower low-fat meat intake compared to the healthy group. Furthermore, the high MIND (Mediterranean-dietary approaches to stop hypertension intervention for neurodegenerative delay) diet score represented a lower risk of MCI. After adjusting for age and gender in the multivariate regression analysis, calcium and fruit intake levels were positively associated with the MMSE. In conclusion, the prevalence of MCI was closely associated with dietary intake, such as copper and calcium, as well as dietary patterns, particularly the MIND diet.

Porcine epidemic diarrhea virus (PEDV) has caused great damage to the global pig industry. The innate immunity plays a significant role in resisting viral infection, however, the exact role of innate immunity in the anti-PEDV response has not been fully elucidated. In this study, we observed that various porcine innate immune signaling adaptors are involved in the anti-PEDV activity. Among these, TRIF and MAVS showed the strongest anti-PEDV activity. The endogenous TRIF, MAVS and STING were selected for further examination of anti-PEDV activity. Agonist stimulation experiments showed that TRIF, MAVS and STING signaling all have obvious anti-PEDV activity. The siRNA knockdown assay showed that TRIF, MAVS and STING are also all involved in anti-PEDV response, and their remarkable effects on PEDV replication were confirmed in TRIF-/-, MAVS-/- and STING-/- Vero cells. For further verification, the anti-PEDV activity of TRIF, MAVS and STING could be reproduced in porcine IPEC-DQ cells. In summary, this study reveals that multiple pattern recognition receptor (PRR) signaling pathways of porcine innate immunity play an important role in the anti-PEDV infection, providing new and useful antiviral knowledge for prevention and control of PEDV spreading.

The change of habitat pattern is one of the key factors affecting the survival of moose population. The study of habitat landscape pattern is the key to protect Chinese cold temperate forest moose population and monitor the global distribution of moose. By means of MaxEnt model, landscape index calculation and ecological risk assessment model, combined with field survey and infrared camera monitoring data from April 2014 to January 2023, the author evaluated the habitat suitability of moose population in Nanwenghe National Nature Reserve of the Great Khingan Mountains, and divided the range of moose habitat based on the logical threshold of the model. The landscape pattern index of moose habitat was calculated by Fragstats software and a landscape ecological risk assessment model was established to analyze the landscape pattern and ecological risk dynamic changes of moose habitat in 2015 and 2020. The results showed that under the premise of global warming, the habitat landscape contagion index decreased by 4.53 and the split index increased by 4.86 from 2015 to 2020. In terms of ecological risk: the area of low ecological risk areas increased by 0.88%; the area of medium ecological risk areas decreased by 1.11%; and the area of higher ecological risk areas increased by 0.23%. The fragmentation risk of landscape pattern of moose habitat tends to increase, the preferred patch type is dispersed, the degree of aggregation is low, and the risk of patch type transformation increases. And the middle and high ecological risk areas are mainly concentrated in the river area and its nearby forests, showing a fine and scattered distribution. Under the interference of global warming and human activities, the fragmenta-tion trend of moose habitat in the study area is increasing, and the habitat quality is declining, which is likely to cause moose population migration. For this reason, the author believes that the whole cold temperate forest is likely to face the risk of increasing the transformation trend of dominant patch types in the cold temperate coniferous forest region mainly caused by global warming, resulting in an in-crease in the risk of habitat fragmentation. While the distribution range of moose is reduced, it has a significant impact on the diversity and ecological integrity of the whole cold temperate forest ecosystem. This study is helpful for human beings to strengthen their awareness of forest and river protection, avoid further intervention in more human activities, and formulate a reasonable plan for forest protec-tion and sustainable development in cold temperate zones. to provide theoretical reference for effective monitoring and protection of cold temperate forest and moose population dynamics.

Historically, viral hepatitis is a considerable public health problem in Central Asian countries, which may have worsened after dissolution of the Soviet Union. However, up-to-date seroepidemiological studies are lacking. The aim of the present study was, therefore, to provide current estimates of seroprevalence of viral hepatitis in Kyrgyzstan, one of the economically least developed countries in the region. We conducted a population-based cross-sectional study in 2018 in the capital of Kyrgyzstan, Bishkek (n=1075). Participants, children and adults, were recruited from an outpatient clinic. Data were collected during face-to-face interviews. A blood sample (6 ml) was collected from each participant and tested with ELISA for the presence of serological markers for five viral hepatitides (A, B, C, D and E). Poststratification weighting was performed to obtain nationally representative findings. The overwhelming majority of the study participants were positive for anti-HAV (estimated seroprevalence, 75.3%; 95% confidence interval: 72.5–77.9%). The weighted seroprevalence estimates of HBsAg, anti-HCV and anti-HDV were 2.2% (1.5–3.3%), 3.8% (2.8–5.1%), and 0.40% (0.15–1.01%), respectively. Anti-HEV seropositivity was 3.3% (2.4–4.5%). Of the 33 HBsAg positive participants, five (15%) were anti-HDV positive. Our study confirms that Kyrgyzstan remains a high endemic country for hepatitis virus A and C infections. However, seroprevalences of HBV and HDV were lower than previously reported, and based on these data, the country could potentially be reclassified from high to (lower) intermediate endemicity. The observed anti-HEV seroprevalence resembles the low endemicity pattern characteristic of high-income countries.

This research article investigates the effectiveness of digital forensics analysis (DFA) techniques in identifying patterns and trends in malicious failed login attempts linked to public data breaches or compromised email addresses in Microsoft 365 (M365) environments. Pattern recognition techniques are employed to analyze security logs, revealing insights into negative behavior patterns. The findings contribute to the literature on digital forensics, opposing behavior patterns, and cloud-based cybersecurity. Practical implications include the development of targeted defense strategies and the prioritization of prevalent threats. Future research should expand the scope to other cloud services and platforms, capture evolving trends through more prolonged, more extended analysis periods, and assess the effectiveness of specific mitigation strategies for identified tactics, techniques, and procedures (TTPs).

Prostate cancer (PCa) is the most diagnosed non-cutaneous cancer in men. Despite therapies such as radical prostatectomy, which is considered curative, distant metastases may form resulting in biochemical recurrence (BCR). This study used radiomic features calculated from multi-parametric magnetic resonance imaging (MP-MRI) to evaluate their ability to predict BCR and PCa presence. Data from a total of 279 patients, of which 46 experienced BCR, undergoing MP-MRI prior to surgery were assessed for this study. After surgery, the prostate was sectioned using patient-specific 3D-printed slicing jigs modeled using the T2-weighted imaging (T2WI). Sectioned tissue was stained, digitized, and annotated by a GU-fellowship trained pathologist for cancer presence. Digitized slides and annotations were co-registered to the T2WI and radiomic features were calculated across the whole prostate and cancerous lesions. A tree regression model was fitted to assess the ability of radiomic features to predict BCR, and a tree classification model was fitted with the same radiomic features to classify regions of cancer. We found that 10 radiomic features predict eventual BCR with an AUC of 0.97 and classifying cancer at an accuracy of 89.9%. This study showcases the application for a radiomics-based tool to screen for the presence of prostate cancer and assess patient prognosis, as determined by biochemical recurrence.

With the rapid development of network science, Turing pattern on complex networks has attracted extensive attention from researchers. In this paper, we focus on spatial patterns in multiplex ER (Erdös-Rényi) random networks, taking the predator-prey model with Allee effect and hyperbolic mortality as an example. In theory, the threshold condition for generating Turing pattern is given using the Turing instability theory of multiplex networks. Numerically, we design relevant experiments to explore the impact of network topology on Turing pattern. The factors considered include model parameters, diffusion rate, average degree of the network, and differences in the average degree of different layers. The results indicate that the importance of diffusion rate and network average degree for Turing pattern is affirmed on the single-layer network. For multiplex networks, the differentiation of average degrees in different layers controls the generation of Turing pattern, which is not affected by the diffusion rates of the two populations. More interestingly, we observe the switching of Turing pattern and spatiotemporal pattern. We believe that these findings contribute to a better understanding of self-organization on complex networks.

This work proposes a methodological approach applied to ephemeral gravel-bed streams to verify the change in the magnitude and frequency of hydrological events affecting the morphological dynamics and sediment budget in this type of channel. For the case study the Azohía Rambla, located in southeastern Spain, was chosen, emphasizing the research on two reference riverbed sections (RCRs): an upper one, with a predominance of erosion, and a middle one, where processes of incision, transport, and deposition converge. First, this approach focuses on relationships between peak discharges and sediment budgets during the period 2018 to 2022. For this purpose, water level measurements from pressure sensors, a One-Dimensional Hydrodynamic model, and findings from comparative analyses of high-resolution differential digital elevation models (HRDEM of Difference - HRDoD) based on SfM-MVS and LiDAR datasets were used. In a second phase the GeoWEPP model was applied to the period 1996-2022 in order to simulate runoff and sediment yield at the event scale for the watersheds draining into both RCRs. During the calibration phase a sensitivity analysis was carried out to detect the most influential parameters in the model and to confirm its capacity to simulate peak flow and sediment delivery in the area described above. Values of NS (Nash-Sutcliffe efficiency) and PBIAS (percent bias) equal to 0.86 and 7.81%, respectively, were found in the calibration period, while these indices were 0.81 and -4.1% in the validation period. Finally, different event class patterns (ECPs) were established for the monitoring period (2018-2022), according to flow stage and morphological channel adjustments (overtopping, bankfull and sub-bankfull, and half-sub-bankfull), and then retrospectively extrapolated to stages of the prior simulated period (1996-2018) from their typical sequences (PECPs). The results revealed a significant increase in the number of events and PECPs leading to lower bed incision rates and higher vertical accretion, which denotes a progressive increase in bed armoring and bank erosion processes.

The (numerical) solution of Ordinary Differential Equations (ODEs) problems is of paramount relevance, ODEs system being an ubiquitous mathematical formulation of many physical phenomena (such as those involved in fluid dynamics, chemistry, biology, evolutionary-anthropology, ...): almost every dynamici phenomenon can be modeled by means of an ODEs system. The present paper is the first manifesto of FOODIE, a library aimed to numerically solve ODEs problems by means of a clear, concise and efficient abstract interface. FOODIE, meaning Fortran Object oriented Ordinary Differential Equations integration library, has manifolds aims: to provide a set to built-in numerical schemes that are accurate, robust, validated and efficient and to allow easy application of these schemes to (almost) all ODEs problems by means of an effective Abstract Calculus Pattern. The key idea is to allow the same solver-implementation to be applied to all ODEs problems thus avoiding the re-implementation of the ODEs solver for each different ODEs problem: code re-usability is consequently maximized, FOODIE being a general robust framework. Besides, the same framework also allows rapid development of new ODEs solvers due to the high abstraction level of the library itself. The present paper is the first announcement of FOODIE project: the current implementation is extensively discussed and its capabilities are proved by means of tests and examples.

This paper studies the evaporative heat transfer characteristics of R744 at low temperatures in a horizontal smooth tube as a cascade refrigeration system (CRS) among hybrid cascade refrigeration systems (HCRSs). There is a lack of research on the low-temperature evaporative heat transfer characteristics of R744 under the operating conditions of evaporators used in actual CRSs used in supermarkets. Therefore, this study aims to provide basic data on the evaporative heat transfer characteristics of R744 in the evaporators of refrigerators used in supermarkets. The tube used in the evaporation experiment conducted herein was a smooth horizontal copper tube with an inner diameter and length of 11.46 mm and 8000 mm, respectively. The experimental pa-rameters were as follows: heat fluxes of 12–21.5 kW/m2, mass fluxes of 75–225 kg/(m2·s), and saturation temperatures of −50–−30 °C. The main results are summarized as follows. (1) When designing the R744 evaporator, the mass and heat fluxes must be maximized within the operating conditions, and the saturation temperature must be designed to be as low as possible. (2) The evaporative heat transfer coefficient of R744 can be predicted well by using the correlation formula of Chen at the evaporation temperature of −40 °C in the CRS.

With the development of free trade port in Hainan Island, the construction of tourist roads around the island is also in full swing. Under the weather conditions of strong typhoon and rainstorm in Hainan, the highway cutting slope built on the coastal weak sandy terraces has strong sand loss and is easy to be scour by rainfall. MICP green spray irrigation solidification technology is used to strengthen the sandy cutting, and pore water pressure monitoring is carried out on the slope model during MICP solidification and rainfall scour. Combined with the model pore water pressure and flow slip failure pattern, dynamic analysis was carried out. The results show that MICP sprinkler irrigation technology can solidified the surface of the slope model in a short time, and the cementation depth of the model reaches 4cm after three sets of rotation reinforcement. The surface reinforcement effect is good, and the sand samples are closely connected. Under the erosion effect of simulated rainfall intensity, the sand loss of the slope is weakened, and no sand binding damage occurs, and the integrity is enhanced. Due to the cementation between sand grains, most of the rainfall was converted into runoff, and the slope slid after 150s. When the slope began to slip, the leading edge of the slope model lost sand and unloaded, and the failure mode was graded creep slip failure. Finally, the slope was divided into several blocks due to the continuous expansion of cracks after the slope failure. The erosion stability of the sandy slope under heavy rains is optimized and the sand loss is prevented effectively. In this study, a new method of MICP remediation techniques is proposed, which provides a new test basis for the application of MICP technology in practical engineering.

Healthy eating behaviour of women is critical not only for their health but also for their children's health and well-being. The present study examined the dietary pattern, nutrition knowledge and attitudes of working women in Western Province, Sri Lanka. In addition, identify the factors associated with Dietary Diversity Score (DDS). A cross-sectional study was conducted among 300 working women, aged 20-60 years, in Western Province, Sri Lanka. The data on so-cio-demography, dietary patterns, and nutrition-related knowledge and attitudes were collected. Overall, 38% of the women were overweight and 13% were obese. The median frequency of intake of chicken, fish, eggs, milk and milk products, green leafy vegetables and fruits were 2, 5, 2, 9, 5 and 10 respectively, per week. A large majority of the women (70%) had tea/coffee with sugar and snacks (60%) at least four times a week. Only a third of the women met the minimum DDS, while more than half of the women had good nutrition-related knowledge and attitudes. Multiple regression analysis showed that age and household income were significantly independently related to DDS, while attitudes were negatively associated. While there was a trend, the association of nutrition-related knowledge with DDS was not statistically significant (p=0.057). The overall F ratio (8.46) was highly significant (p=0.000) and the adjusted R2 was 0.093. The results demonstrated that a significant proportion of working women have good basic nutrition-related knowledge and attitudes, while two-thirds of them do not meet the minimum DDS. Furthermore, age, family income and knowledge were positively associated with DDS, while attitudes were negatively associated. Before designing any intervention, further research is needed using a qualitative approach to understand how nutrition knowledge and eating behaviour are related in this population group.

Due to the accelerated development of the offshore method of oil production in recent decades, especially in the Arctic region, the risks of crude oil pollution of the waters of the World Ocean are inevitably increasing. These oil spills during the exploitation of shelf deposits, transportation of oil from production sites and other anthropogenic impacts have a devastating impact on the marine biosphere, economy and life of coastal regions. For operative monitoring of water surface and fixation of oil spills it is necessary to use modern, effective and reliable methods, remote monitoring tools. One of such methods is radar. This article deals with increasing the efficiency of the radar method of water surface monitoring by means of constructive modification of the radar antenna array and changing the shape of the radio signal. As a result of the literature review, theoretical analysis of radar and conducted mathematical modeling it is substantiated the increase of radar monitoring efficiency by using phased active antenna array and construction of the cosecant-squared pattern diagram of the radio signal.

Background: Streptococcus agalactiae or Group B Streptococcal colonization of the gastrointestinal and genital tracts of pregnant women usually remains asymptomatic; even if it is the critical determinant of infection in neonates and young infants. It causes early and late onset of invasive Group B Streptococcus (GBS) disease manifesting as septicemia, meningitis and pneumonia. Now it is recognized as an important cause of maternal and neonatal morbidity and mortality in many parts of the world including Ethiopia where the magnitude of the problem has been little studied. The aim of this study was to assess the prevalence of GBS colonization, to identify associated risk factors and antimicrobial susceptibility pattern among pregnant women at selected health facilities of Wolaita Sodo Town, Southern Ethiopia. Methodology: A health facility based cross-sectional study design was conducted at WSUCSH & Wolaita Sodo Health Center from June to August, 2022. A total of 279 pregnant women who were in ANC follow up with at 35-37 weeks of gestation were included. For GBS isolation, recto-vaginal swabs were inoculated in 1ml Todd-Hewitt broth medium supplemented with 10μg/ml colistin and 15μg/ml nalidixic acid and followed by identification of isolates based on colonial morphology, gram stains, catalase reaction and CAMP tests. Antimicrobial susceptibility testing was performed using modified Kirby–Bauer disk diffusion method. All collected data were organized in Epi info 4.6.0.2, then transfer tabulated using SPSS version 20. Logistic regression analysis was used to see the association between variables. Finally, the p-value < 0.05 were considered statistically significant. Results: In present study, 279 pregnant mothers included and their age was between 15 to 38 years with a mean of 26.5 ± 4.5 years. Of all participants, the highest 120 (43.01%) were housewives. The overall carriage rate of GBS was 67(24.0%). GBS colonization showed a statistically significant association with college and above levels of maternal education [AOR= 6.610, 95% CI (1.724 - 25.349), P=0.01]. High susceptibility of GBS isolate was seen to Penicillin G & Chloramphenicol (92.5%) for each, Ampicillin, and Ceftriaxone (89.6%) each, following Vancomycin (74.62%), and Erythromycin (77%). Relatively, GBS showed high resistance to Tetracycline (88 %). Conclusion: In this study, the overall prevalence of GBS colonization was 24.0%. College and above educational level was statistically significant with GBS colonization. This study used to give attention to the management of pregnant women by making GBS culture one of the routine diagnoses during ANC follow-up and to prevent infection by early detection.

Obstructive sleep apnea (OSA) is multi-faceted world-wide distributed disorder exerting deep effects on the sleeping brain. In the latest years strong efforts have been dedicated to find novel measures assessing the real impact and severity of the pathology, traditionally trivialized by the simplistic apnea/hypopnea index. Due to the unavoidable connection between OSA and sleep we reviewed the key aspects linking the breathing disorder with sleep pathophysiology, focuings on the role of cyclic alternating pattern (CAP). Sleep structure, reflecting the degree of apnea-induced sleep instability, may provide topical informations to stratify OSA severity and foresee some of its dangerous consequences such as excessive daytime sleepiness and cognitive deterioration.

In offshore drilling, accidents such as gas invasion, overflow, and kicks are inevitable, and they can escalate into blowouts and other catastrophic events that result in casualties and substantial economic losses. Therefore, maintaining drilling safety requires accurate monitoring of gas invasion and overflow. The majority of overflow monitoring methods currently utilized at drilling sites are threshold-based. However, monitoring parameters acquired during actual drilling operations frequently contain noise signals, making it difficult for threshold-based methods to strike a balance between improving accuracy and minimizing false positives. In this paper, Pattern Recognition-based Kick Detection (PRKD) is proposed as a novel method for diagnosing overflow in offshore drilling. This method utilizes the overflow evolution process by integrating multi-phase flow calculations, data filtering theory, pattern recognition theory, the Bayesian framework, and other theoretical models. The PRKD effectively detects and monitors gas intrusion and overflow based on single parameters by analyzing the shape and wave characteristics of the curves. The case analysis demonstrates that the proposed method for monitoring drilling overflow achieves high precision while maintaining a low false positive rate. By combining advanced computational techniques with pattern recognition algorithms, the PRKD improves the accuracy and reliability of kick detection, enabling proactive responses to potential risks, protecting the environment and human lives, and optimizing drilling operations.

This article introduces ten similarity measures that utilize cosine and cotangent functions to compare (m,n)-rung orthopair fuzzy sets, this a super class of q-rung orthopair fuzzy sets. Further, we applied our established weighted similarity measures to medical diagnosis, pattern recognition,and building material problems and also presented the comparison between established measures with the existing cosine and cotangent measures of q-rung orthopair, pythagorean and intuitionistic fuzzy sets. Lastly, we considered a numerical example that demonstrates the effective and scientific application of these similarity measures in plant leaf disease classification. Furthermore, we present graphical interpretations to demonstrate the effectiveness of our established measures.

Most research findings in Ghana and all over the globe lay much emphasis on the technical knowledge of plastics; especially giving preference to the biodegradable over the synthetic/Single-Use plastics. Questionnaires were administered to about 200 respondents in the Ho Municipality out of which 163 responses were filled and returned. Results showed that of all the variables tested only Legislative Framework has a meaningful impact on the behaviour of Ho indigenes. Awareness level: (Synthetic Plastics and Biodegradable Plastics) as well as Attitudinal Change do not influence people’s behaviour when using plastics. Findings from this study are further discussed and recommendations were proffered to instil eco-friendly behaviour among people.

Ground penetrating radar (georadar, GPR), widely used in geology, archeology and road construction, is an efficient tool for searching and studying subsurface objects and structures. When planning GPR missions, it is necessary to predict the resolution of the device and the achievable probing depth. The article discusses the methods and results of assessing these characteristics of the Loza-V and Loza-N radars obtained in the course of archaeological and geographical expedition works.

Recent advancements in Artificial Intelligence (AI), Deep Learning (DL), and computer vision have revolutionized various industrial processes through image classification and object detection. State-of-the-art Optical Character Recognition (OCR) and Object Detection (OD) technologies, such as YOLO and PaddleOCR, have emerged as powerful solutions for addressing challenges in recognizing textual and non-textual information on printed stickers. However, a well-established framework integrating these cutting-edge technologies for industrial applications still needs to be discovered. In this paper, we propose an innovative framework that combines advanced OCR and OD techniques to automate visual inspection processes in an industrial context. Our primary contribution is a comprehensive framework adept at detecting and recognizing textual and non-textual information on printed stickers within a company, harnessing the latest AI tools and technologies for sticker information recognition. Our experiments reveal an overall macro accuracy of 0.88 for the sticker OCR across three distinct patterns. Furthermore, the proposed system goes beyond traditional Printed Character Recognition (PCR) by extracting supplementary information, such as barcodes and QR codes present in the image, significantly streamlining industrial workflows and minimizing manual labor demands.

The metro station ridership features are associated significantly with the built environment factors of the pedestrian catchment area surrounding metro stations. The existing studies have focused on the impact on total ridership at metro stations, ignoring the impact on varying patterns of metro station ridership. Therefore, the reasonable identification of metro station categories and built environment factors affecting the varying patterns of ridership in different categories of stations is very important for metro construction. In this study, we developed a data-driven framework to examine the relationship between varying patterns of metro station ridership and built environment factors in these areas. By leveraging smart card data, we extracted the dynamic characteristics of ridership and utilized hierarchical clustering and K-means clustering to identify diverse patterns of metro station ridership, and finally identified six main ridership patterns. We then developed a new built environment measurement framework and adopted multinomial logistic regression analysis to explore the association between ridership patterns and built environment factors. (1) The clustering analysis result revealed that six station types were classified based on varying patterns of passenger flow, representing distinct functional characteristics. (2) The regression analysis indicated that diversity, density, and location factors were significantly associated with most station function types, while destination accessibility was only positively associated with employment-oriented type station, and centrality was only associated with employment-oriented hybrid type station. These results could inform the coordinated development of rail transit and land use, and the renewal and enhancement of the built environment in the pedestrian catchment area surrounding metro stations.

The agricultural sector is undergoing a revolution that requires sustainable solutions to the challenges that arise from traditional farming methods. To address these challenges, technical and sustainable support is needed to develop projects that improve crop performance. This study focuses on the onion crop and the challenges presented throughout its phenological cycle. Aerial monitoring using unmanned aerial vehicles (UAV) and digital image processing were used to identify patterns in the onion crop, including humid areas, weed growth, vegetation deficits, and decreased harvest performance. An algorithm was developed to identify the patterns that most affected crop growth, as the average local production reported was 40.166 ton/ha, but only 25.00 ton/ha was reached due to blight caused by constant humidity and limited sunlight. This resulted in the death of leaves and poor development of bulbs, with 50% of the production being of medium size. It is estimated that approximately 20% of the production was lost due to blight and unfavorable weather conditions.

In this work, we consider two SIR patterns with demography: the classical pattern and a modified pattern with a linear transmission coefficient of the infection. By reformulating of each first order differential systems as a system with two second-order differential equations, we investigate the nonlinear dynamics of the system from the Jacobi stability point of view by using the KCC geometric theory. We will study the intrinsic geometric properties of the systems by determining the geometric associated objects: the zero-connection curvature tensor, the nonlinear connection, the Berwald connection, and the five KCC invariants: the first invariant - the external force εi, the second invariant - the deviation curvature tensor Pji, the third invariant - the torsion tensor Pjki, the fourth invariant - the Riemann-Christoffel curvature tensor Pjkli, and the fifth invariant - the Douglas tensor Djkli. In order to obtain necessary and sufficient conditions for the Jacobi stability near the equilibrium points, the deviation curvature tensor will be determined at each equilibrium points. Furthermore, we will compare the Jacobi stability with the classical linear stability, inclusive by diagrams related to the values of parameters of the system.

Considering the current needs of industry 4.0, especially in the condition of systems linked to artificial intelligence, this multidisciplinary concept work and difficult to execute, proposes the main idea of recognizing patterns using mathematical concepts of simple access and logical resolution of great potential. The objective of this work is to demonstrate a process for pattern recognition by applying the Fibonacci concept to vibration signals of hybrid dynamical systems. For this to be possible, it was necessary to use the concepts of preprocessing in a vector for pattern recognition, together with the concepts of the golden rule of Fibonacci, finally, all applied in the theorem of Jeffcott Rotors. The general result, from a technical point of view, demonstrates positivity and relationship of patterns, because, considering the aspect of the location between the values of the experimental and numerical result, both signs have similarities.

Background: The AWaRe tool was set up by the World Health Organization (WHO) to promote the rational use of antimicrobials. Indeed, this tool classifies antibiotics into four groups, Access, Watch, Reserve and not-recommended antibiotics. In Republic Democratic of Congo, data on antibiotic dispensing (prescribing) by health professionals according to the AWaRe classification are scarce. In this research work, we aimed to explore antibiotic dispensing pattern from health professionals according to the WHO AWaRe classification to strengthen the national antimicrobial resistance plan. Methods: For this purpose, a survey was conducted from July to December 2022 in the district of Tshangu in Kinshasa. From randomly selected drugstores, drug-sellers were interviewed and randomly selected customers attending those drugstores were included in the study for medical prescriptions collection. The prescribed antibiotics were classified into the Access, Watch, Reserve and not recommended antibiotics group and by antibiotics number by prescription among pharmacies surveyed. Results: Of 400 medical prescriptions collected, 301 (75.25%) contained antibiotics. Of 301 prescriptions containing antibiotics, 164 (164/301; 54.5%) contained one antibiotic, 117 (117/301; 38.9%) two antibiotics, 15 (15/301; 5%) three antibiotics and 5 (5/301; 1.6%) 4 antibiotics. Out of the total of 463 antibiotics prescribed, 169 (169/463; 36.5%) were from the Access group, 200 (200/463; 43.2%) from the Watch group and 94 (94/463; 20.3%) from not recommended antibiotics group, respectively. Based on the anatomical, therapeutic and chemical (ATC) classification, it can be seen that third generation cephalosporins contained 34.33% of the prescribed antibiotics, followed by penicillins 17.17%, macrolides 7.63%, aminoglycosides 7. 36% and Imidazoles 7.36%, thus accounting approximately for 74% of the classes of antibiotics prescribed. Of the 463 antibiotics prescribed, the most frequently prescribed antibiotics were Ceftriaxone (21.38%), Amoxicillin (11.01%), Gentamycin (5.61%), Amoxicillin-clavulanic acid (5 .61%), Azithromycin (4.97%) and Metronidazole (4.75%), thus accounting for approximately 54% of all antibiotics prescribed. Conclusion: These results highlight the importance of strict implementation of the national plan to combat antimicrobial resistance and the need to train health workers in the correct application of the WHO AWaRe classification.

The research proposes a self-directed paradigm with self-design using the existing technology with LMS modules, discussions, and self-tests. The research establishes its criteria for assurance of teaching and learning known as 7x2C for the compliance of content, and appearance along with other criteria for the analysis. The above technology of web and LMS is tested for a business course that is technology-oriented in creating an experiential learning system for Covid-19 awareness. Similarly, among other ideas, an environment for educating learners about diabetes and obesity has been designed. The project is known as Sunchoke with its theme of Grow, Eat, and Heal. The educators can use their technology and apply self-directed pedagogy to transform this approach to their customized ways by using their content and rubrics.

Many studies have focused on the impacts of rainfall duration and intensity while overlooking the role of rainfall patterns on intensive tillage erosion in hilly agricultural landscapes. The objective of this study was to determine the combined effects of rainfall patterns and intensive tillage erosion on surface runoff and soil loss on sloping farmland in the purple-soil area of China. Five simulated rainfall patterns (constant, rising, falling, rising-falling, and falling-rising) with the same total precipitation were designed, and the intensive tillage erosion treatment (IT) and no-tillage treatment (NT) were subjected to simulated rainfall using rectangular steel tanks (2 m × 5 m) with a slope of 15°. To analyse the differences in the hydrodynamic characteristics induced by tillage erosion, we calculated the flow velocity (V), Reynolds number (Re), Froude number (Fr), and Darcy-Weisbach resistance coefficient (f). The results indicate that significant differences in surface runoff and soil loss were found among different rainfall patterns and stages (P < 0.05). The falling pattern and falling-rising pattern had faster runoff-initiating times and larger sediment yields than those of the other rainfall patterns. f varied from 0.30 to 9.05 for the IT and 0.48 to 11.57 for the NT and exhibited an approximately inverse trend to V and Fr over the course of the rainfall events. Compared with the NT, the mean sediment yield rates from the IT increased the dynamic range of 8.34%–16.21% among different rainfall patterns. The net contributions of the IT ranged from 2.77% to 46.39% on surface runoff and 10.14%–78.95% on soil loss on sloping farmland. Surface runoff and soil loss were positively correlated with rainfall intensity, V, and Fr but negatively correlated with f irrespective of tillage intensive (P < 0.05). For varying-intensity rainfall patterns, soil and water loss fluctuated during rainfall events, suggesting that the changes in rainfall intensity and tillage intensity would result in drastic variations in soil hydrological characteristics and sediment transport mechanisms. The time sequences of rainfall intensity in each rainfall pattern significantly affected surface runoff, soil erosion, and their contribution rates to total soil and water loss. Moreover, tillage erosion effects on soil and water loss were closely related to rainfall patterns in hilly agricultural landscapes. Our study not only sheds light on the mechanism of tillage erosion and rainfall erosion but also provides useful insights for developing tillage-water erosion prediction models to evaluate soil and water loss on cultivated hillslopes.

(1) Background: Foot strike pattern and cadence are two important variables that are related to sport performance and injury risks; the objective of this study is to analyse the foot strike pattern and cadence of the male elite athlete that participated in the Tokyo Olympic Games marathon. (2) Methods: Two independent researchers analysed the foot strike pattern of the first 51 participants in the 5km, and the cadence of the finalists in three different segments of the race. Descriptive statistics were presented for the main variables of this study. A repeated measures ANOVA was used to study the differences in cadence between different sections of the race (p&lt;0.05). (3) Results: Average of the cadence of the eight finalists was 185.5 steps per minute (SD ± 5.1). No differences between sections of the race were found. The more most common foot strike pattern was midfoot strike pattern, followed by rearfoot strike pattern, and forefoot strike pattern. The results of cadence are in line with previous studies that analysed elite athletes, with the values being higher than other research involving recreational runners. (4) Conclusions: elite marathon runners mostly run with a running non-rearfoot strike pattern and a cadence of over 185 steps per minute.

The main objective of this study is to conduct a bibliometric analysis of scholarly publications of Authorship Pattern. The present study covers 1723 research papers published in the area of authorship pattern and indexed in Scopus database from the year 2013 to 2022. These research publications considered for the present study have been analysed based on their year wise growth, pattern of authorship, times citations, type of publication, most productive publication source as well as countries and institutions. The study shows the positive growth of the literatures with collaborative authorship pattern and good citation status. This original research paper will be helpful to the researchers of library and information science, especially who are working in the area of bibliometrics studies.

In the current manuscript, a novel software application for Rapid Damage Assessment of RC buildings subjected to earthquake excitation is presented based on Artificial Neural Networks. The software integrates the use of a novel deep learning methodology for Rapid Damage Assessment into modern software development platforms, while the developed graphical user interface promotes the ease of use even from non-experts. The aim is to foster actions both in the pre- and post- earthquake phase. The structure of the source code permits the usage of the application either autonomously as a software tool for Rapid Visual Inspections of buildings prior to or after a strong seismic event or as a component of Building Information Modelling systems in the framework of digitizing building data and properties. The methodology implemented for the estimation of the RC buildings’ damage states is based on the theory and algorithms of Pattern Recognition problems. The effectiveness of the developed software is successfully tested using an extended, numerically generated database of RC buildings subjected to recorded seismic events

Alfalfa (Medicago sativa L.) is the most cultivated forage legume around the world. Under a variety of growing conditions, forage yield in alfalfa is stymied by biotic and abiotic stresses including heat, salt, drought, and disease. Given the sessile nature of plants, they use strategies such as differential gene expression to respond to environmental cues. Transcription factors control the expression of genes that contribute to or enable tolerance and survival during periods of stress. Basic-leucine zipper (bZIP) transcription factors have been demonstrated to play a critical role in regulating plant growth and development as well as mediate the responses to abiotic stress in several species, including Arabidopsis thaliana, Oryza sativa, Lotus japonicus, and Medicago truncatula. However, there is little information about bZIP transcription factors in cultivated alfalfa. In the present study, 237 bZIP genes were identified in alfalfa from publicly available sequencing data. Multiple sequence alignments showed the presence of intact bZIP motifs in the identified sequences. Based on previous phylogenetic analyses in Arabidopsis thaliana, alfalfa bZIPs were similarly divided and fell into 10 groups. The physicochemical properties, motif analysis, and phylogenetic study of the alfalfa bZIPs revealed high specificity within groups. The differential expression of alfalfa bZIPs in a suite of tissues indicates that particular bZIP genes are specifically expressed at different developmental stages in alfalfa. Similarly, expression analysis in response to ABA, cold, drought, and salt stresses, indicates that a subset of bZIP genes are also differentially expressed and likely play a role in abiotic stress signaling and/or tolerance. These expression patterns were further verified by qRT-PCR. However, further functional characterization of bZIP transcription factors in alfalfa will help illuminate the role they play in stress tolerance mechanisms in legumes and facilitate the molecular breeding of stress tolerance in alfalfa.

Sensors and actuators are fundamental units in Cyber-Physical and Internet of Things systems. Because they are included in a variety of systems, using many technologies, it is very useful to characterize their functions abstractly by describing them as Abstract Entity Patterns (AEPs), that are patterns that describe abstract conceptual entities. For concreteness, we study them here in the context of autonomous cars. An autonomous car is a complex system because, in ad-dition to its own complex design, it interacts with other vehicles and with the surrounding in-frastructure. To handle these functions, it must incorporate various technologies from different sources. An autonomous car is an example of a Cyber-Physical System, where some of its func-tions are performed by Internet of Things units. Sensors are extensively used in autonomous cars to measure physical quantities; actuators are commanded by controllers to perform appro-priate physical actions. From AEPs we can derive concrete patterns, a structure combining re-lated AEPs is an Entity Solution Frame (ESF). Both sensors and actuators are susceptible to mali-cious attacks due to the large attack surface of the system where they are used. Our work is in-tended to make autonomous cars more secure, which also increases their safety. Our final objec-tive is to build a Security Solution Frame for sensors and actuators of autonomous cars that will facilitate their secure design. A Security Solution Frame is a solution structure that groups to-gether and organizes related security patterns. This article is the first stage of a secure unit that can be used to design not only secure autonomous cars but also any system where sensors and actuators are used. This paper concentrates on AEPs and ESFs for sensors and actuators; that is, on the functional aspects of these devices.

The aim of this study was to assess the ability of multiscale sample entropy (MSE), refined composite multiscale entropy (RCMSE), and complexity index (CI) to characterize gait complexity through trunk acceleration patterns in subjects with Parkinson's disease (swPD) and healthy subjects, regardless of age or gait speed. The trunk acceleration patterns of 51 swPD and 50 HS were acquired using a lumbar-mounted magneto-inertial measurement unit during their walking. MSE, RCMSE, and CI were calculated on 2000 data points, using scale factors (τ) 1-6. Differences between swPD and HS were calculated at each τ, and the area under the receiver operating characteristics, optimal cutoff points, post-test probabilities, and diagnostic odds ratios were calculated. MSE in the antero-posterior direction at τ 4 and τ 5, and MSE in the ML direction at τ 4 outperformed the other entropy measures in terms of discriminative ability and characterized the gait of swPD with 79%, 82%, and 78% probabilities, respectively, and correlated with the motor disability, pelvic kinematics, and stance phase. Using a time series of 2000 data points, a scale factor of 4 or 5 in the MSE procedure can be considered as a marker of gait variability and complexity in swPD.