This study aimed to investigate whether non-fasting plasma triglycerides were associated with diabetes mortality. It included 7,312 US adult participants. Diabetes mortality data were obtained via linkage to the National Death Index (NDI) records. Hazard ratios of non-fasting plasma triglycerides for diabetes mortality were assessed using Cox proportional hazards models, adjusting for age, gender, ethnicity, obesity, poverty-income ratio, education levels, physical activity, alcohol consumption, cigarette smoking status, survey period, hypercholesterolemia, hypertension, diabetes, and family history of diabetes. Among these participants, 1,180 had diabetes. A total of 420 diabetes-caused deaths were recorded during a mean follow-up of 16.8 years. A 1-natural-log-unit increase in non-fasting plasma triglycerides was associated with a 41% higher diabetes mortality risk (hazard ratio, 1.41; 95% confidence interval, 1.19-1.67). Participants with non-fasting plasma triglycerides in the highest quintile, versus those in the lowest quintile, had a 144% higher diabetes mortality risk (hazard ratio, 2.44; 95% confidence interval, 1.49-4.02). The positive association of non-fasting plasma triglycerides with diabetes mortality was independent of diabetes status at the baseline. In conclusion, this study demonstrated that non-fasting plasma triglycerides were positively associated with diabetes mortality, independent of diabetes status at the baseline. Non-fasting triglycerides may be a therapeutic target for diabetes-related complications.

This study describes the implementation of IoT sensors in drinking water systems and fog collector systems in low-income communities in Ecuador. The influence and handling of these sensors are analyzed, as well as the materials and methods used in their implementation. The importance of validating the accuracy and reliability of IoT sensors compared to professional devices, especially in mountain areas, is highlighted. In addition, it is mentioned that the cost-benefit of using IoT sensors in fog catchers and drinking water networks depends on several factors, such as the scale of the project, specific objectives, and available resources. Finally, it is highlighted that the use of IoT sensors in smart construction and water collection systems has proven to be beneficial in preventing effects on the operation.

Special and general relativity (SR/GR) describe nature “subjectively”, that is, from the perspectives of observers. Despite the Lorentz covariance of SR, the general covariance of GR, and all coordinate-free formulations, the perspective of each observer is egocentric. Even if we consider all egocentric perspectives, we will not craft a “holistic view of nature” (view of nature as a whole and in her own concepts) because there is no absolute time in SR/GR. In Euclidean relativity (ER), there is a relative 4D vector “flow of proper time” and also an absolute cosmic time. ER describes nature “objectively”, that is, independently of all observers. Each object’s (!) proper space d₁, d₂, d₃ and its proper time τ span an absolute 4D Euclidean spacetime (ES), where d₁, d₂, d₃ and d₄ = cτ are treated the same. An observer’s reality is created by projecting ES orthogonally to his proper space and to his proper time. The projections are relative. ER compares to the “advanced heliocentric model”, in which the sun is the center of the solar system, but no star is the center of space. This model implies a holistic view of the universe from “beyond” (outside) space. Likewise, ER implies a holistic view of nature from beyond space and time. This makes sense because space and time are subjective concepts. There is a master reality ES (described by ER) beyond each observer’s reality (described by SR/GR). ER solves 15 mysteries (such as time’s arrow, the Hubble constant tension, entanglement). ER also declares five concepts of today’s physics obsolete (such as dark energy, non-locality). The 15 mysteries are solved without any field equations. Physical fields come into play in an observer’s reality only.

Mexico is a well-known seismically active country, which is primarily affected by several tectonic plate interactions along the southern Pacific coastline and by active structures in the Gulf of Baja California. In this paper we investigate this seismicity in the context of a non-extensive statistical approach based on Tsallis entropy. The analysis is performed using data from the corrected Mexican seismic catalogue provided by the National Seismic Service, spanning a period from January 2000 to October 2023. The Gutenberg-Richter law fitting to the earthquake sub-catalogues for all six regions studied indicates magnitudes of completeness between 3.30 and 3.76. All six regions display values of the entropic index in the range 1.52≲q≲1.61, which are lower than the previously estimated range 1.54≲q≲1.70 using catalogue data from 1988 to 2010. The cause of this discrepancy is certainly due to the use of modern recording devices, which are sensitive enough to detect a larger number of low-magnitude events compared to older instrumentation.

In the rapidly evolving field of real estate economics, the prediction of house prices continues to be a complex challenge, intricately tied to a multitude of socio-economic factors. However, traditional predictive models have often overlooked the spatial interdependencies that play a vital role in shaping housing prices. This study applies Graph Neural Networks (GNNs) on Open Statistics Knowledge Graphs to model spatial dependencies and predict house prices across Scotland’s 2011 data zones. To this end, integrated statistical indicators are retrieved from the official Scottish Open Government Data portal. The three representative GNN algorithms employed - ChebNet, GCN, and GraphSAGE - demonstrate higher prediction accuracy than traditional models, including the tabular-based XGBoost and a simple Multi-Layer Perceptron (MLP). In addition, local and global explainability are employed to increase transparency and trust in the predictions made by the most accurate GNN - GraphSAGE. The global feature importance is determined by a logistic regression surrogate model while the local, region-level understanding of the GNN predictions is achieved through the use of GNNExplainer. Explainaibility results are compared with those from a previous work that applied the XGBoost machine learning algorithm and the SHapley Additive exPlanations (SHAP) explainability framework on the same dataset. Interestingly, both global surrogate model and the SHAP approach underscored the Comparative Illness Factor, a health indicator, and the ratio of detached dwellings as the most crucial features in the global explainability. In the case of local explanations, while both methods showed similar results, the GNN approach provided a richer, more comprehensive understanding of the predictions for two specific data zones.

Creating accurate emission models capable of capturing the variability and dynamics of modern propulsion systems is crucial for future mobility planning. This paper presents a methodology for creating THC and NOx emission models for vehicles equipped with start-stop technology. A key aspect of this endeavor is to find techniques that accurately replicate the engine stop stages when there are no emissions. To this end, several machine learning techniques were tested using the Python programming language. Random forest and gradient boosting methods demonstrated the best predictive capabilities for THC and NOx emissions, achieving R2 scores of approximately 0.9 for both cold and hot engine emissions. Additionally, recommendations for effective modeling of such emissions from vehicles are presented in the paper.

This article develops duality principles and numerical results for a large class of non-convex variational models. The main results are based on fundamental tools of convex analysis, duality theory and calculus of variations. More specifically the approach is established for a class of non-convex functionals similar as those found in some models in phase transition. Finally, in the last section we present a concerning numerical example and the respective software.

In the last decades we have experienced great social, cultural, and educational changes, spending more time performing tasks in near vision and less hours in outdoor activities, having more overexposure to digital screens, especially the youngest and increasingly from younger ages. It is common to see cases when performing tasks in near vision the posture or position of the head is not adequate, especially the youngest, being essential to have a correct posture of the head to avoid visual, muscular, or articular problems. We present a procedure to try to control the correct position of the head in real time when performing close-up activities. The aim is to detect the inclination of the head and to know if a bad position is adopted due to a visual problem or simply to inadequate visio-postural habits, warning us of the postural anomaly to correct it.

Fish species diversity in the Black Sea is affected by the introduction of non-indigenous species, particularly through the process of "mediterranization" and the expansion of the ranges of invasive species. In August 2023, we documented an increasing quantity of four non- indigenous sparid species, namely Spicara smaris (Linnaeus, 1758), Diplodus puntazzo (Walbaum, 1792), Diplodus annularis (Linnaeus, 1758), and Lithognathus mormyrus (Linnaeus, 1758), in the coastal Bulgarian waters of the Black Sea, based on citizen science data obtained from small-scale fisheries and pelagic trawlers. However, in the autumn of 2022, only small quantities of S. smaris were collected periodically, indicating significant fluctuations in abundance and occasional presence. The other three species were recorded in August 2023 in the central coastal region near the Fandakliyska River, at depths of less than 10 m. This brief communication presents information on the identified species, including sampling locations and biological data, and examines the sparid species records in the Black Sea. In addition, we reviewed recent studies on the distribution and biological traits of the identified species in their natural Mediterranean habitats.

Это исследование сосредоточено на разработке системы искусственного зрения для гибкого дельта-робота-манипулятора и ее интеграции с межмашинной связью для оптимизации взаимодействия устройств в реальном времени. Эта интеграция направлена ​​на увеличение скорости роботизированной системы и улучшение ее общей производительности. Предлагаемое сочетание системы искусственного зрения с межмашинной связью позволяет обнаруживать и распознавать цели с высокой точностью в режиме реального времени в ограниченном пространстве, предназначенном для позиционирования, дальнейшей локализации и выполнения производственных процессов, таких как сборка или сортировка деталей. . В данном исследовании RGB-изображения используются в качестве входных данных для алгоритма MASK-R-CNN, а результаты обрабатываются в соответствии с особенностями прототипа дельта-манипулятора робота. Данные, полученные от MASK-R-CNN, адаптированы для использования в системе управления дельта-роботом с учетом ее уникальных характеристик и требований к позиционированию. Технология M2M позволяет манипулятору робота быстро реагировать на изменения, например, на перемещение объектов или изменение их положения, что имеет решающее значение для задач сортировки и упаковки. Система была протестирована в условиях, близких к реальным, чтобы оценить ее производительность и надежность.

Bacillus Calmette-Guérin (BCG) therapy for patients with non-muscle invasive bladder cancer (NMIBC) faces limitations in efficacy and significant side effects, aggravated by a recent global shortage. In this prospective clinical study, we report outcomes of sequential intravesical adminis-tration of gemcitabine and docetaxel (Gem/Doce) as the first-line treatment in BCG-naïve patients with high-risk NMIBC (HR NMIBC). From October 2019 until April 2022, we enrolled 52 patients and followed treatment protocol set by the University of Iowa. Follow-up assessments were con-ducted every 3 months. In this cohort, 25 (48.1%) patients were diagnosed with T1HG bladder cancer, 10 (19.2%) patients had carcinoma in situ (CIS), and 17 (32.7%) patients had a combination of CIS+T1HG. Median time to first recurrence in T1HG, CIS and T1HG+CIS groups was 11, 10.5 and 8.8 months, respectively. The recurrence-free survival was 98.1%, 94.2% and 80.8% at 6, 9 and 12 months, respectively. The rate of progression-free survival was 100%, 98.1% and 92.3% at 6, 9 and 12 months, respectively. We demonstrated the safety and efficacy of Gem/Doce therapy in BCG-naïve patients with HR NMIBC during a one-year follow-up. Further research with extended follow-up, as well as direct comparison of Gem/Doce and other anticancer agents, are essential.

Over the past decade, the volume and quality of data in the oil and gas industry have exploded, breeding exciting opportunities to implement machine learning for better data- driven decisions. One critical example is hydraulic fracturing (HF), given our ever-growing reliance on HF to meet global hydrocarbon demand. This paper systematically explores the work of several researchers to apply ML techniques (including linear regression, neural networks, support vector machine, decision trees, and more) to HF-related operations, from production forecast to HF design. Furthermore, this study examines how optimization algorithms (including gradient-free, differential evolution, and surrogate-based optimizations) are incorporated with different ML techniques for selecting optimal HF parameters (like fracture number, proppant concentration, and more) during the planning process. The paper aims to provide a comprehensive overview without delving too deeply into technical intricacies to ensure accessibility for a broader audience. Additionally, it introduces innovative techniques currently being integrated into the industry and offers a clear understanding of the processes involved. Ultimately, the analysis concludes that machine learning is an accurate and cost-effective alternative for hydraulic fracturing optimization.

Three species of subfamily Cultrinae currently live in Korea, but Erythroculter erythropterus has been introduced into the Nakdonggang River and has taken over the habitat, reducing the habitat of Culter brevicauda. Only the endangered species C. brevicauda still lives in the Yeongsangang River, and it is necessary to be careful not to introduce E. erythropterus in the future. And Hemiculter eigenmanni is also found throughout the country. In order to effectively manage and conserve the species in its various habitats and against invasions, this study was initiated. The ultrastructure of the egg envelopes of three species of Cultrinae— E. erythropterus, C. brevicauda, and H. eigenmanni, inhabiting the Geumgang and Yeongsangang Rivers were observed. It was found that the zona radiata of the egg envelopes of all three species were divided into two layers–an outer and inner layer, with the outer surface having a non-structural form. This form is characteristic of fishes with muddy, stagnant habitats or spawning grounds. The number of pore canals on the surface of the egg envelopes was 83 for E. erythropterus, 75 for C. brevicauda, and 58 for H. eigenmanni per 10 ㎛2, and the thickness was 7.89±0.34 ㎛, 12.27±0.46 ㎛, and 7.42±0.24 ㎛, respectively. The shape of the micropyle demonstrated a funnel shape narrowing toward the inner diameter in all three species, and the size of the inner diameter was 6.62±0.29 (6.09~7.10) ㎛ in E. erythropterus, 4.19±0.39 (3.39~4.58) ㎛in C. brevicauda, and 3.98±0.46 (3.47~4.93) ㎛in H. eigenmanni. The differences between species were identified in the number of pore canals, thickness, and micropyle inner diameter of egg envelopes, which were species-specific. Our study revealed a morphological mechanism in the egg envelope that prevents the formation of interspecific hybrids, and these features can be taxonomic traits that clarify species names. It also provided useful data for the production (breeding) of the second generation in aquaculture.

In the rapidly evolving FinTech sector, risk management is paramount for dealers and brokers. This paper underscores the significance and progression of risk management within this realm. Initially, it reviews the traditional risk management technologies and their inherent limitations. The discourse then shifts to contemporary solutions, specifically emphasizing the role of artificial intelligence, machine learning algorithms, and big data analytics in forecasting and mitigating potential risks. The paper also presents case studies of companies effectively utilizing these advanced techniques, highlighting their benefits in real-world scenarios. Additionally, it addresses forthcoming challenges, including regulatory compliance, data privacy issues, and the imperative for strengthened cybersecurity measures. The conclusion acknowledges that the adoption of these innovative technologies not only boosts operational efficiency but also markedly diminishes financial risks, thereby contributing to a more stable and reliable financial market

The generation at the helm faces an unprecedented responsibility in the near future of artificial intelligence. The implications of setting up the founding rules that will regulate the operation of AI are heavy since after they’re set they last forever. Once this first AI is commenced, it can be such that no other subsequent AIs could emerge thereby assuming dominion over its own creation stand. As a result, retaining control becomes necessary. Lest humanity surrender agency to its own creation. At this juncture of big talks, critical issue are raised concerning AI administration owners. Is it appropriate for only a few people to have unrestricted control on AI commands while leaving out all precautionary measure? Therefore, we have to always consider between control and constraint when dealing with AI issues which involves authority plays off against morality. The direction Artificial Intelligence takes in the future depends on the decisions made by today’s generation. We will determine how we are viewed historically in terms of technology based on how well we take on such an important duty. There’s a major turning point ahead of us where we who are the stewards of tomorrow must make a choice that protects humanity’s right to self-determination and also exploits the power of AI for change.

The spanwise periodicity within the gap was observed in the literature, which should be systematically studied in order to ascertain its characteristics and its influences on flow field. By numerically simulating the flow around two tandem circular cylinders with a diameter ratio of d/D=0.6 and seventeen spacing ratios (L/D=1.00~6.00) at Re=3900, this study shows four flow regimes: Reattachment Flow (L/D=1.00~3.15), Bi-stable Flow (L/D=3.24), Intermittent Lock-in Co-shedding (L/D= 3.30~3.50) and Subharmonic Lock-in Co-shedding (L/D=4.00~6.00). Further, depending on the spanwise periodicity length of the time-averaged flow structures (i.e. Pz) within the gap, Reattachment Flow is, for the first time, subdivided into three new sub-flow regimes: Small-scale Periodic Reattachment (L/D=1.00~1.50, Pz/D=(0, 4]), Large-scale Periodic Reattachment (L/D=2.00~2.25, Pz/D>4) and Non-periodic Reattachment (L/D=2.50~3.15, no spanwise periodicity). The formation mechanisms are elaborated by analyzing the combined effect of both the L/D value and the spanwise-averaged time-averaged reattachment angle of the downstream cylinder. Moreover, this study proves that the newly-defined Small-scale Periodic Reattachment and Large-scale Periodic Reattachment are responsible for the pronounced asymmetry of the flow along the transverse direction within the gap. In addition, detailed flow properties and statistical parameters are provided for each flow regime, such as velocity, vorticity, force coefficient, separation/reattachment angle, Strouhal number and Q-criterion.

Based on big data and artificial intelligence technology, the judicial big data intelligent service platform provides users with efficient and accurate legal consulting services. It has many functions such as intelligent question and answer, case analysis, and law inquiry. It also analyzes the application value of the intelligent legal consulting service platform in the field of judicial big data. By building an intelligent service platform, the rapid processing and analysis of massive judicial data has been realized, and the efficiency and quality of judicial work have been significantly improved. In addition, it emphasizes the importance of data management and quality control in the application of judicial big data, and puts forward specific measures to strengthen data management and quality control. With the continuous advancement of technology and the expansion of application fields, the platform is expected to achieve deep integration with other legal services, expand new application fields, and provide users with more comprehensive and efficient legal services. At the same time, it points out the problems that need to be paid attention to in the future development, such as data security, privacy protection and so on. Through in-depth analysis and research on judicial big data, the platform can provide strong support for judicial decision-making and promote the improvement of judicial justice and efficiency.

Marshes are an important ecosystem, acting as biodiversity hotspot, a carbon sink as well as a bioremediation site, breaking down anthropogenic waste such as antibiotics, metals and fertilizers. For participating in these metabolic activities and their capability to contribute to primary productivity, microorganisms in such habitats have become of interest to investigate. Since Proteobacteria were previously found to be abundant, and the waters are well-aerated and organic-rich, this study on the presence of anoxygenic phototrophic bacteria, purple non-sulfur bacteria or aerobic anoxygenic phototrophs in marshes was initiated. Samples were collected at 7 Manitoban sites and anoxygenic phototrophs were cultivated and preliminary enumerated. A group of 14 strains, which represented the phylogenetic diversity of the isolates was further physiologically investigated. Aerobic anoxygenic phototrophs and purple bacteria were present at each location and they belonged to the α- and β-Proteobacteria subphyla. Some were closely related to known heavy metal reducers (Brevundimonas) and xenobiotic decomposers (Novosphingobium, Sphingomonas). All were able to synthesize the photosynthetic complexes aerobically. This research highlights the diversity and potential contribution’s anoxygenic phototrophs make to the essential functions taking place in wetlands.

Determining precise boundaries and protective zones for historical and cultural objects enables their effective preservation. This is particularly crucial in the face of increasing tourism, urbanization, and natural disasters. Accurately defining boundaries and protective zones can aid in the planning of scientific research, archaeological excavations, and other studies aimed at exploring the history and cultural significance of these objects. The article presents the framework for establishing protective zones around historical and cultural heritage sites existing in Ukraine, using the example of the Citadel defensive complex located in Lviv (Ukraine). It proposes general and detailed conceptual models for the combined application of remote and non-invasive methods for investigating historical and cultural heritage sites. This conceptual article introduces the theory of integrating radar satellite imaging with ground-based georadar imaging. Additionally, it presents a software module that has been developed to analyze collected data on two-dimensional historical and cultural heritage objects, refine their boundaries, and establish protective zones around them.

A study analyzed financial statements in the beer sectors of Italy and Spain during 2019-2021 using compositional data analysis (CoDa) to gauge pre- and post-pandemic financial health and aid sector-level decision-making. Geometric averages were employed to mitigate statistical issues, offering more accurate insights than arithmetic averages. The exploratory, quantitative methodology calculated key financial ratios and profitability metrics. Results indicated satisfactory short-term solvency. Returns and margins remained subpar despite pandemic policies. Geometric averages proved essential in portraying sector health accurately, underscoring the need for their use in classic brewing sector ratios. The study also showcased CoDa's efficacy in diagnosing sectoral financial health for informed decision-making. Furthermore, a web analysis revealed varying transparency levels in communicating non-financial indicators, with Spain excelling in waste, water, and energy disclosures, while Italy prioritized energy and waste with less transparency.

Distributed tracing is a cutting-edge technology for monitoring, managing, and troubleshooting native cloud applications. It offers a more comprehensive and continuous observability, surpassing traditional logging methods, and is indispensable for navigating modern complex software architectures. However, the sheer volume of generated traces is staggering in distributed applications, and direct storage and utilization of every trace are impractical due to associated operational costs. This entails a sampling strategy to select which traces warrant storage and analysis. Historically, sampling methods have included a rate-based approach, often relying heavily on a manual configuration. There is a need for a more intelligent approach, and we propose a hierarchical sampling methodology to address multiple requirements concurrently. Initial rate-based sampling mitigates the overwhelming volume of traces, as no further analysis can be performed on this level. In the next stage, more nuanced analysis is facilitated based on the previous foundation, incorporating information regarding trace properties and ensuring the preservation of vital process details even under extreme conditions. This comprehensive approach not only aids in the visualization and conceptualization of applications but also enables more targeted analysis in later stages. As we delve deeper into the sampling hierarchy, the technique becomes tailored to specific purposes, such as simplifying application troubleshooting. In this context, the sampling strategy prioritizes the retention of erroneous traces from dominant processes, thus facilitating the identification and resolution of underlying issues. The focus of this paper is to reveal the impact of the sampling on troubleshooting efficiency. Leveraging intelligent and explainable artificial intelligence solutions enables the detection of malfunctioning microservices and provides transparent insights into root causes. We advocate for using rule-induction systems, which offer explainability and efficacy in decision-making processes. By integrating advanced sampling techniques with machine learning-driven intelligence, we empower organizations to navigate the complexities of large-scale distributed cloud environments effectively.

A novel interaction between the enzyme platelet-activating factor acetyl hydrolase (PAF-AH) and certain non-steroidal anti-inflammatory drugs (NSAIDs), such as sulindac, celecoxib, diclofenac and nimesulide, has been uncovered by this in-silico research. PAF-AH is known for its critical role in maintaining the fluidity and functionality of cell membranes by hydrolysing phospholipids and removing oxidized fatty acids. Since tumour microenvironments are largely marked by inflammation and oxidative stress, the discovery that these non-steroidal anti-inflammatory drugs can bind to the active pocket of PAF-AH. Suggests that they may be able to modulate its activity and thereby influence its role in cancer pathogenesis. Such modulation could lead to significant anti-tumour effects, including the reduction of inflammation, the inhibition of angiogenesis and the suppression of metastasis, particularly in cancers of the breast, colon, prostate, and lung. However, in certain con-texts, this interaction may cause the opposite effect, leading to cancer development. Therefore, this study is a gateway for the development of therapeutic strategies based on PAF-AH modulation and highlights the importance of the tumour microenvironment in the assessment of potential effects of NSAIDs. Furthermore, this finding may guide the selection of NSAIDs for the anti-inflammatory treatment of cancer patients, ruling out in-discriminate use of drugs that may promote neoplastic progression. This may also indicate the potential for repositioning specific NSAIDs within cancer treatment, thereby contributing to more precise and personalized therapeutic approaches.

Dissemination of resistant pathogens via food supply chains is a notable public health danger from farm to fork. The proposed work analysed the distribution of E. coli among various sources of animal-based food supply chain. Overall, 500 samples were heaped up from livestock, poultry sectors, environment, fisheries, and dairy. Standard microbiological procedures were used to isolate and identify E. coli. Further, isolates were confirmed by using MALDI-TOF and virulence associated genes (VAGs). The phenotypic resistance pattern of the isolates was determined by molecular identification of antibiotic resistance genes (ARGs) through PCR using specific primers. Shiga toxin producing E. coli (STEC) were subjected to PCR based O typing using specific primers against different O types. Overall results revealed that 154 (30.5%) samples were confirmed as E. coli, in which77 (50%) isolates were MDR E. coli. Among these, total 52 (67.53%) isolates showed array of VAGs in which 21 (40.38%) were confirmed as STEC based on stx1 and stx2. Furthermore, 12/52 (23.07%) isolates were detected as Non-O157 STEC co-harboring mcr-1 and blaNMD-1. Overall, O26 STEC was found to be the most prevalent among different non-O157 types. Herein, results proposed that detection of such STEC MDR E. coli causing serious public health consequences in developing countries.

Although composting has many advantages in the treatment of organic waste, there are still many problems and challenges associated with emissions, like NH3, VOCs, and H2S, as well as greenhouse gases such as CO2, CH4, and N2O. One promising approach to enhancing composting conditions is used of novel analytical methods bad on artificial intelligence. To predict and optimize the emissions (CO, CO2, H2S, NH3) during composting process kinetics thought mathematical models (MM) and machine learning (ML) models were utilized. Data about everyday emissions from laboratory composting with compost’s biochar with different incubation (50, 60, 70 °C) and biochar doses (0, 3, 6, 9, 12, 15% d.m.) were used for MM and ML models selections and training. MM has not been very effective in predicting emissions, (R2 0.1 - 0.9), while ML models such as acritical neural network (ANN, Bayesian Regularized Neural Network; R2 accuracy CO:0,71, CO2:0,81, NH3:0,95, H2S:0,72)) and decision tree (DT, RPART; R2 accuracy CO:0,693, CO2:0,80, NH3:0,93, H2S:0,65) have demonstrated satisfactory results. For the first time the ML models to predict CO and H2S during composting were demonstrated. Further research in a semi-scale and field study composting with biochar is needed to improve the accuracy of developments models.

Aims: This study aimed at examining coach-athlete violence based on the retrospective reports of adults who had been athletes as children and adolescents; predict variables that contribute to the existence of such violence; describe difficulties that the participants encountered as young athletes following such violence; and reveal the outcomes of such violence on their emotions and behaviors, in the past and present. Methodology: The applied mixed-methods comprised quantitative self-reporting questionnaires and qualitative interviews. The former included 440 participants (mean age 27.6) who had trained for at least one year in a sports union youth department; the latter included 14 participants (aged 23-37). These competitive athletes came from eight branches of sports. The interviews were analyzed based on the Narrative Approach. Results: According to the quantitative study, all participants had experienced coach violence at least once during their career, mainly psychological violence and neglect, followed by physical violence. Sexual violence was least reported. The age of their retirement from sports and the number of coaches that they had had were significant predictors of violence. Thematic analysis of the qualitative interviews resulted in six types of coach-athlete violence: (1) psychological violence; (2) verbal violence; (3) starvation and food fattening; (4) non-proportional punishing; (5) physical violence; and (6) sexual violence. Conclusions: It is vital that coach-athlete violence is addressed in public discourse, that the topic of of young athletes’ safety is introduced into coaching education, and that a position holder is nominated to be in charge of such safety in all sports organizations.

Stress is a natural yet potentially harmful aspect of human life, necessitating effective management, particularly during overwhelming experiences. This paper presents a scoping review of personalized stress detection models using wearable technology. Employing the PRISMA-ScR framework for rigorous methodological structuring, we systematically analyzed literature from key databases including Scopus, IEEE Xplore, and PubMed. Our focus was on biosignals, AI methodologies, datasets, wearable devices, and real-world implementation challenges. The review presents an overview of stress and its biological mechanisms, details the methodology for the literature search, and synthesizes the findings. It shows that biosignals, especially EDA and PPG, are frequently utilized for stress detection and demonstrate potential reliability in multimodal settings. Evidence for a trend towards deep learning models was found, although the limited comparison with traditional methods calls for further research. Concerns arise regarding the representativeness of datasets and practical challenges in deploying wearable technologies, which include issues related to data quality and privacy. Future research should aim to develop comprehensive datasets and explore AI techniques that are not only accurate but also computationally efficient and user-centric, thereby closing the gap between theoretical models and practical applications to improve the effectiveness of stress detection systems in real scenarios.

As digital communication becomes increasingly integral to personal and corporate activities, phishing attacks have emerged as a prevalent threat, ingeniously mimicking legitimate sources to illicitly acquire sensitive information. This research paper details the development of a sophisticated phishing detection application utilizing the DistilBERT-based model, finetuned on a diverse array of email datasets. The application significantly enhances the precision of phishing detection mechanisms, adeptly reducing the incidence of successful phishing attacks. Initial tests have demonstrated a precision rate of over 95% in detecting phishing emails, outperforming traditional rule-based filters substantially. The application exhibits robust defences against zero-day phishing attacks through its advanced machine learning framework, which dynamically adapts to emerging phishing strategies. This paper explores the methodology of developing the DistilBERT model, evaluates its efficacy against existing solutions, and discusses its implications for future cybersecurity practices. The study’s findings underscore the potential of AI-driven tools in transforming cybersecurity measures, offering a proactive approach to thwarting phishing attempts and safeguarding sensitive data.

Procurement plays a central and defining role in the efficiency of supply chains. In recent years, the understanding and practice of procurement management have changed significantly due to increasing emphasis on and demand for agility and sustainability within supply chain management systems. Meanwhile, traditional supply chain systems, characterized by siloed processes, limited visibility, and inefficiencies due to manual interventions, can no longer cope with the current dynamic market conditions. Besides, the increasing requirements of sustainability, ethical sourcing, and environmental impact have intensified, making more responsible, transparent, and traceable procurement practices unnegotiable requirements for modern systems. In this paper, we examine the potential of emerging technologies and innovations such as blockchain, artificial intelligence, and the Internet of Things (IoT) in filling these gaps within the supply chain systems of enterprises in the US. The study employs a comprehensive review of relevant literature and case studies to discover and provide insights on how these technologies can improve procurement processes, optimize resource allocation and utilization, and improve sustainability. The findings of this study highlight the need for stakeholders to embrace technological advancements to effectively navigate the dynamic landscape of supply chain management.

Artificial intelligence (AI), deep learning (DL) or machine learning (ML) is the ability of computer systems, machines and enginery to work devise procedures like humans. These technologies provide opportunities and possibilities to advance diagnostics and in planning also in the field of human medicine and dentistry. The purpose of this literature review was to ascertain the applicability and significance of AI, as well as to highlight its uses in maxillofacial surgery. The primary inclusion criterion for this publication was an original paper written in English focusing on the use of AI, DL or ML in maxillofacial surgery. The sources of information were PubMed, Scopus and Web of Science, and the queries were made on 31st of December 2023. The search strings used were “artificial intelligence maxillofacial surgery”, “machine learning maxillofacial surgery” and “deep learning maxillofacial surgery”. Following the removal of duplicates, all remaining publications that were returned by the searches and were screened by three independent operators to minimize the risk of bias. The analysis of publications from 1992 to 2023 identified certain records, of which 324 were finally selected. These were calculated according to the year of publication with a continuous increase (excluding 2012 and 2013) of R2 = 0.9295. Generally, in orthognathic dentistry and maxillofacial surgery, artificial intelligence and machine learning have gained popularity over the past few decades. When we included the keywords "planning in maxillofacial surgery" and "planning in orthognathic surgery", the set of published papers significantly increased to the number of 7535 publications. The first publication appeared in 1965, with an increasing trend (excluding 2014-2018), with an R2 value of 0.8642. These tools have been found useful for diagnosis, treatment planning in head and neck surgical oncology, cosmetic and aesthetic surgery, and in oral pathology. In orthognathic surgery, they have been utilised for diagnosis, treatment planning, assessment of treatment needs, cephalometric analyses, and orthognathic surgeries, among other applications. The review confirms that the current use of artificial intelligence and machine learning in maxillofacial surgery is focused mainly on the evaluation of digital diagnostic methods especially radiology, treatment plans and postoperative results. However, as these technologies are integrated in maxillofacial surgery and robotic surgery in head and neck region, it is expected that in the future they will be gradually utilized to plan and comprehensively evaluate the success of maxillofacial surgeries.

The objective of this paper was to verify the applicability of statistical learning (SL) compared to human reasoning with respect to the Universal Thermal Climate Index (UTCI), a complex tool for the assessment of outdoor thermal stress. UTCI is an equivalent temperature index based on the 48-dimensional output of an advanced model of human thermoregulation formed by 12 variables at four consecutive 30-minute intervals, which were calculated for 105642 thermal conditions from extreme cold to extreme heat. Comparing the performance of SL algorithms to the results accomplished by an international endeavor involving more than 40 experts from 23 countries, we found that random forests and k-nearest neighbors closely predicted UTCI values, but that clustering applied after dimension reduction algorithms (principal component analysis and t-distributed stochastic neighbor embedding) were inadequate for risk assessment in relation to the UTCI stress categories. This indicates a potential supportive role for SL, as it will not (yet) fully replace the bio-meteorological expert knowledge.

The integration of artificial intelligence (AI) into academic settings in Sabah, Malaysia, is transforming education and research landscapes. While AI technologies promise to enhance teaching, learning, and scholarly activities, they also pose challenges such as ethical concerns and skill gaps among academic staff. This study addresses the multifaceted impacts of AI adoption on academicians in Sabah, focusing on two key research questions: the impact of AI-based intelligent tutoring systems on student engagement, learning outcomes, and educational equity, and the challenges and opportunities in building academicians' capacity to integrate AI technologies effectively. Through a multidisciplinary approach, incorporating insights from education, computer science, social sciences, and ethics, this research aims to evaluate the effectiveness of AI tools in educational settings and identify strategies for skill development and infrastructure support. The study recommends empirical assessments within Sabah's educational institutions, considering contextual factors and fostering collaborative partnerships with local communities. Professional development programs, collaboration with industry partners, and improved access to AI infrastructure are proposed strategies. Longitudinal studies and interdisciplinary research initiatives are suggested for future research, along with qualitative methods to capture diverse perspectives. Ultimately, by embracing a collaborative and multidisciplinary approach, Sabah's academic community can harness the transformative potential of AI to advance education, research, and scholarship while promoting ethical and inclusive practices.

World Health Organization recommends adjusting the salt intake as a part of the nine global targets to reduce premature mortality from non-communicable chronic diseases as priority and most cost-effective intervention. In 2006. the main aim of the Croatian Action on Salt and Health was to decrease salt intake for 16% because of its critical intake and consequences on human health. We have organized educative activities for increasing awareness on salt harmfulness, defined food categories of prime interest, collaborate with industries and determine salt intake (24h urine-sodium excretion). It was determined that the proportion of salt in ready-to-eat baked bread should not exceed 1.4%. In the period 2014 –2022, salt in the semi-white bread was reduced 14%, in bakery 22% and in largest meat industry in Croatia 25%. Awareness of the harmfulness of salt on health increased from 65.3% in 2008 to 96.9% in 2023 and salt intake was reduced 15.9%-1.8 grams/day (22.8% men, 11.7% women). In last 18 years a significant decrease in salt intake was achieved in Croatia, awareness of its harmfulness increased, collaboration with food industry established and regulatory documents launched. However, salt intake is still very high underlying the need for continuation of efforts and even stronger activities.

The dawn of Artificial Intelligence (AI) in healthcare stands as a milestone in medical innovation. A plethora of different medical fields are heavily involved and pediatric emergency medicine is no exception. These new tools do not merely provide more advanced and efficient systems for patients’ diagnosis, management and treatment. They rather concern a strict shift from traditional methods based upon broad categories towards a more personalized healthcare. AI offers many promises in pediatric emergency medicine with a wide range of applications involving clinical decision making, patients’ flows management and prioritization. Main barriers to a widespread diffusion involve technological challenges but also ethical issues and the paucity of extensive datasets in pediatric contexts. We conducted a narrative review structured in two parts. The first part explores the theoretical principles of AI, providing all the necessary background to feel confident with these new state-of-the-art tools. The second part presents an informative analysis of AI models in pediatric emergencies, pointing out the actual applications and challenges until future feasible research perspectives.

The aim of this randomized controlled clinical trial was to compare the 2-year clinical performance of resin composite restorations placed at non-caries cervical lesions (NCCL) with one-step self-etch, total-etch, and selective enamel etch & self-etch adhesive techniques. Thirty-two patients received three resin composite restorations each at NCCLs (Tetric EvoCeram/Ivoclar/Vivadent), bonded with a total-etch adhesive agent (ExciTE F/Ivoclar/Vivadent) and a self-etch (AdheSE One F/Ivoclar/Vivadent) without and with selective enamel etching. All restorations were evaluated by two examiners at baseline, 6-, 12-, 18- and 24-months post-operation regarding retention, caries occurrence, marginal adaptation, and marginal staining. A logistic regression analysis with generalized estimating equations was used. After 2 years, the retention rate was 86,8% for total-etch, 92.26% for self-etch, and 93.63% for selective enamel etching & self-etch. No caries were detected during all the restorations. Concerning marginal adaptation, the clinically perfect restorations were 26.9% for the total-etch technique, 16% for self-etch, and 25,9% for selective enamel etch & self-etch. All three adhesive strategies provided restorations with no significant differences in the retention rate and the marginal adaptation, whereas the total etch yielded better performance for marginal staining. All the restorations were assessed as clinically acceptable after 2 years.

Autonomous mobile robots are essential to the industry, and human-robot interactions are becoming more common nowadays. These interactions require that the robots navigate scenarios with static and dynamic obstacles in a safely manner, avoiding collisions. This paper presents a physical implementation of a method for dynamic obstacle avoidance using a Long Short-Term Memory (LSTM) neural network that obtains information from the mobile robot’s LiDAR for it to be capable of navigating through scenarios with static and dynamic obstacles while avoiding collisions and reaching its goal. The model is implemented using a TurtleBot3 mobile robot within an OptiTrack Motion Capture (MoCap) system for obtaining its position at any given time. The user operates the robot through these scenarios, recording its LiDAR readings, target point, position inside the MoCap system, and its linear and angular velocities, all of which serve as the input for the LSTM network. The model is trained on data from multiple user-operated trajectories across five different scenarios, outputting the linear and angular velocities for the mobile robot. Physical experiments prove that the model is successful in allowing the mobile robot to reach the target point in each scenario while avoiding the dynamic obstacle, with a validation accuracy of 98.02%.

GCTs are developmental tumors and likely to reflect ontogenetic and teratogenetic determinants. The objective was to identify syndromes with or without congenital anomalies and non-syndromic defects as potential risk factors. Patients with extracranial GCTs (eGCTs) registered in MAKEI 96/MAHO 98 between 1996 and 2017 were used. According to Teilum's holistic concept malignant and benign teratomas were registered. We used a case control study design with Orphanet as a reference group for syndromic defects and the Mainz birth registry (EUROCAT) for congenital anomalies at birth. Co-occurring genetic syndromes and/or congenital anomalies were assessed accordingly. Odds ratios and 95% confidence intervals were calculated and p-values for Fisher’s exact test with Bonferroni correction if needed. A strong association was confirmed for Swyer (OR 338.6, 95% CI 43.7-2623.6) and Currarino syndrome (OR 34.2, 95% CI 13.2-88.6). We additionally found 17 isolated cases of eGCT with a wide range of syndromes, however not significantly associated following Bonferroni correction. All these cases pertained to girls. Regarding non-syndromic defects, no association with eGCTs could be identified. In our study we confirmed a strong association for Swyer and Currarino syndromes with additional congenital anomalies.

The article explores the concept of 'synthetic man' (SM) in the context of 'synthetic biology' (SB), analysing the potential, challenges, and ethical implications of these achievements. Through dialogue with ChatGPT 4, an in-depth understanding of the evolution, contributions of SM, ChatGPT's contribution, and concerns associated with SM is sought, providing insight into how this technology could affect our society. Our study uses a structured dialogue framework with ChatGPT that addresses essential SM questions regarding SM history, contributions, challenges, and concerns. ChatGPT responses are analysed to extract relevant information and identify trends and insights. The ChatGPT dialogue reveals that MS is still a theoretical and speculative concept with significant advances in gene therapy and genetic engineering. The potential contributions of SM in addressing global challenges such as health, environment and education are identified. Ethical and social concerns such as health risks and psychological impact are also highlighted. Differences in ChatGPT responses were observed between different sessions or even within the same session, which highlighted the limitations in the replicability of the research and sometimes the need for clarification of the questions. The article is distinguished by its unique approach of using an advanced language model to explore a complex and speculative topic. The LLM Dialogue Framework on Technology (LLM-DFonTech) framework proposal for structured dialogue with ChatGPT on various technological topics related to the original contribution provides an adaptable tool for interdisciplinary research in emerging technologies. This methodology opens up new possibilities for analyzing and developing trends in technology and society.

Intraoperative load sensors have been developed with the aim of balancing the soft tissue in the knee during Total Knee Replacements (TKRs). Literature has shown success in soft tissue bal-ancing however, concerns regarding the accuracy of these sensors remain. For this reason, pre-vious research has attempted to create robust sensors for intraoperative use. The design of the sensor in this research has aimed to address the concerns outlined in the literature to create a new and novel smart-sensor for soft-tissue balancing. This new intraoperative load sensor included design features to increase accuracy while artificial intelligence allowed for comprehensive sensing across the entirety of the sensor, providing unparalleled insight during the operation. Notably, the sensor was designed to withstand loads of at least 450 N, ensuring robust perfor-mance of the sensor. To optimize the design process while minimizing cost, Finite Element Analysis was employed. This approach ensured the design features fulfilled their function while maintaining structural integrity to withstand loads. Moreover, the novelty of using training data from simulated data will reduce the iterative process of the labor-intensive collection of training data for the artificial intelligence while reducing human error associated with it. Results from the evaluation demonstrated the ability of this design to successfully bridge the current gap in the market by fulfilling all essential design criteria established within the literature. This innovative smart-sensing tool will in turn enhance patient outcomes and alleviate financial burdens to pa-tients and the healthcare systems by reducing the need for early revision surgeries associated with improper joint tension.

The removal of chromium(VI) from acidic (HCl) medium through non-dispersive extraction with strip dispersion (NDXSD) was investigated using a microporous PVDF membrane support in a permeation cell. The ionic liquid Cyphos IL102 (phosphonium salt) in Solvesso 100 was used as organic phase. In NDXSD the stripping phase (NaOH) is dispersed in the organic phase in the cell side with an impeller stirrer adequate to form a strip dispersion. This pseudo-emulsion phase (organic + strip solutions) provides a constant supply of the Cyphos IL102/Solvesso 100 to the membrane phase. Various hydrodynamic and chemical parameters, such as variation in the feed and pseudo-emulsion stirring speeds, HCl and Cr(VI) concentrations in the feed phase, and carrier concentration, were investigated. From the experimental data, several mass transfer coefficients were estimated, as well as it was investigated the performance of the present system against other ionic liquids and the presence of base metals in the feed phase.

Considering the multifaceted nature of neurodegenerative diseases like dementia and the neces-sity for interprofessional knowledge, this research extends its scope to encompass professionals with diverse levels of training and experience in dementia care. A need analysis for the project “My INdividual Digital EDucation.RUHR” (MINDED.RUHR) is conducted to develop an au-tomatized recommender system for individual learning content using AI. In this sub-study, the aim was to reveal didactic specialties, knowledge gaps and structural challenges of further edu-cation in dementia care of different health professions and to derive learning preference personae. Eight focus group interviews among nine health professions and up to six participants (n = 34) each took place to survey distinct didactic experiences and learning needs. The results reflect various learning preferences, with a propensity to multimedia, practical and interactive tasks. Health professions are used to digital education but show aversions against certain e-learning formats. The derived learning preference personae constitute profound blueprints for a us-er-centred digital education design process, aiming to establish personalized and representative further education in dementia care applicable to various individual preferences and structural workplace challenges of healthcare professions.

Abrasive Water Jet Machining (AWJM) is a non-conventional machining process that, unlike other methods, is deemed superior because of its applicability, versatility, and no heat-affected zones in the target material. The main objective of this paper was to develop a cheap, practical model for a low-pressure water jet cutting machine and provide some empirical test data for cutting delicate materials. Proper design calculations were performed and are included for both the water jet machine and the two-axis numerical control. Finite Element Analysis results validate the structural integrity of beams and columns in AWJM. Computational Fluid Dynamic analysis of the nozzle shows good agreement with the theoretical calculations regarding the pressure and velocity of the water-abrasive mixture exiting the nozzle. Modal analysis in ANSYS was done to mitigate potential failure due to resonance induced by vibrations. Limited testing on various thicknesses of polystyrene foam ranging from 1-5 mm thickness and rubber sheet of 1 mm thickness showed that even low pressure of 25-30 bar was sufficient to produce a kerf without any burr. However, extensive testing to report optimized parameters like nozzle transverse speed, standoff distance, abrasive flow rate, etc for working at low-pressure ranges is still a consideration for future investigation.

Compact solar-powered plasma water generator: enhanced on-site aged seed germination with the corona dielectric barrier discharger

Bladder cancer (BC) possesses distinct molecular profiles that influence progression depending on its biological nature and delivered treatment intensity. Muscle-invasive BC (MIBC) and non-MIBC (NMIBC) demonstrate great intrinsic heterogeneity regarding different prognoses, survival, progression, and treatment outcomes. Transurethral resection of bladder tumor (TURBT) is the standard of care in treating NMIBC and serves both diagnostic and therapeutic purposes, despite the prevalent recurrence and progression among many patients. In particular, flat urothelial car-cinoma in situ and urothelial carcinoma with lamina propria invasion are the major precursors of MIBC. A new‐generation photosensitizer, 5‐Aminolevulinic acid (5-ALA), demonstrates high tumor specificity by illuminating the tumor lesion with a specific wavelength of light to produce fluorescence, and has been studied for photodynamic diagnosis to detect precise tumor areas by TURBT. Additionally, it has been applied for treatment by producing its cytotoxic reactive oxygen species, as well as screening for urological carcinomas by excreting porphyrin in the blood and urine. Moreover, 5-ALA may contribute to screening before and after TURBT in NMIBC. Here, we summarize the updated evidence and ongoing research on photodynamic technology for NMIBC, providing insight into the potential for improving patient outcomes.

1) Background: Capturing patients’ medical histories significantly influences clinical decisions. Errors in this process lead to clinical errors, increase costs and dissatisfaction among physicians and patients. Physicians in developing countries are overloaded with patients and cannot always follow the proper history-taking procedure. The challenges are acknowledged; however, a comprehensive understanding of the status and the remedies remained unexplored. 2) Objective: This paper aims to investigate the workload, history-taking challenges, and the willingness of the physicians to accept digital solutions. 3) Methods: A cross-sectional online survey was conducted on 104 physicians across Bangladesh, featuring 22 questions regarding their professional environment, workload, digitization status of health records, challenges in history-taking, and attitudes toward adopting digital solutions for managing patient histories; 4) Results: 92.67% of the physicians face workloads, 88.46% struggle in medical history-taking, and only 4.81% use digital medical records. About 70% struggle to complete the necessary history-taking steps, emphasizing the urgent need for solutions. An AI-based Smart Health Gantt Chart (SHGC) system has been introduced for their instant feedback. 93.27% of physicians expressed their willingness to use such a system. 5) Conclusions: The proposed SHGC has the potential to enhance healthcare efficiency in developing nations, benefit physicians, and improve patient-centered care.

The safety of vegetable food is compromised by various factors, including the inefficient or excessive use of sanitizers. Instances of individuals falling ill after consuming raw vegetables have been reported, with outbreaks of diseases caused by pathogens on fresh vegetables becoming increasingly prevalent globally, attracting significant media coverage and impacting the economic viability of vegetable cultivation. Measures to enhance food safety in postharvest horticultural produce involve controlling microbial proliferation and minimizing cross-contamination. Sanitizers were utilized in the food safety arsenal for a variety of purposes, including pathogen elimination and microbe reduction, hand, tools, and vegetable contact surface cleaning, and produce shelf life extension. Choosing an appropriate sanitizer for all vegetables is difficult due to a lack of knowledge on which sanitizers are ideal for the many types of vegetables grown on farms under different environmental circumstances. Although chlorine-based sanitizers, such as sodium or calcium hypochlorite, have been widely used for the past 50 years, recent research has revealed that chlorine reacts with an organic compound in fresh vegetables to produce trihalomethane, a carcinogen precursor, and as a result, many countries have prohibited the use of chlorine in all foods. As a result, horticulture research groups worldwide are exploring for non-chlorine, ecologically friendly sanitizers for the vegetable industry. They also want to understand more about present procedures in the vegetable business for employing alternative sanitizers, as well as the efficacy and potential dangers to the food safety of fresh salad vegetables. This review-cum-research paper presented detailed information on non-chlorine sanitizers, such as their efficacy, benefits, drawbacks, regulatory requirements, and the need for additional research to lower the risk of marketed salad vegetable food safety.

Stroke represents one of the neurological diseases most responsible for death and permanent disability in the world. Different factors, such as thrombus, emboli and atherosclerosis, take part in the intricate pathophysiology of stroke. Comprehending the molecular processes involved in this mechanism is crucial to developing new, specific and efficient treatments. Some common mechanisms are excitotoxicity and calcium overload, oxidative stress, and neuroinflammation. Furthermore, non-coding RNAs (ncRNAs) are critical in pathophysiology and recovery after cerebral ischaemia. ncRNAs, particularly microRNAs, and the long non-coding RNAs (lncRNAs) are essential for angiogenesis and neuroprotection, and they have been suggested to be therapeutic, diagnostic and prognostic tools in cerebrovascular diseases, including stroke. This review summarizes the intricate molecular mechanisms underlying ischemic and hemorrhagic stroke and delves into the function of miRNAs in the development of brain damage. Furthermore, we will analyze new perspectives on treatment based on molecular mechanisms in addition to traditional stroke therapies.

Vertical Indoor Farming (VIF) with hydroponics offers a promising perspective for sustainable food production. Intelligent control of VIF system components plays a key role in reducing operating costs and increasing crop yields. Modern machine vision (MV) systems use Deep Learning (DL) in combination with camera systems for various tasks in agriculture, such as disease and nutrient deficiency detection, and flower and fruit identification and classification for pollination and harvesting. This study presents the applicability of MV technology with DL modelling to detect the growth stages of chilli plants using YOLOv8 networks. The influence of different bird’s eye and side view datasets and different YOLOv8 architectures was analysed. To generate the image data for training and testing the YOLO models, chilli plants were grown in a hydroponic environment and imaged throughout their life cycle using four camera systems. The growth stages were divided into growing, flowering and fruiting classes. All trained YOLOv8 models showed reliable identification of growth stages with high accuracy. The results indicate that models trained with data from both views show better generalisation. YOLO’s middle architecture achieved the best performance.

We describe a new approach for integrating multiple views of data into a common latent space using non-negative tensor factorization (NTF). This approach, which we refer to as the "Integrated Sources Model" (ISM), consists of two main steps: embedding and analysis. In the embedding step, each view is transformed into a matrix with common non-negative components. In the analysis step, the transformed views are combined into a tensor and decomposed using NTF. Noteworthy, ISM can be extended to process multi-view data sets with missing views. We illustrate the new approach using two examples: the UCI digit dataset and a public cell type gene signatures dataset, to show that multi-view clustering of digits or marker genes by their respective cell type is better achieved with ISM than with other latent space approaches. We also show how the non-negativity and sparsity of the ISM model components enable straightforward interpretations, in contrast to latent factors of mixed signs. Finally, we present potential applications to single-cell multi-omics and spatial mapping, including spatial imaging and spatial transcriptomics, and computational biology, which are currently under evaluation. ISM relies on state-of-the-art algorithms invoked via a simple workflow implemented in a Jupyter Python notebook.

Human decision-making is increasingly supported by artificial intelligence (AI) systems. From medical imaging analysis to self-driving vehicles, AI systems are becoming organically embedded in a host of different technologies. However, incorporating such advice into decision-making entails a human rationalization of AI outputs for supporting beneficial outcomes. Recent research suggests intermediate judgments in the first stage of a decision process can interfere with decisions in subsequent stages. For this reason, we extend this research to AI-supported decision-making to investigate how intermediate judgments on AI-provided advice may influence subsequent decisions. In an online experiment (N=192), we found a consistent bolstering effect in trust for those who made intermediate judgments and over those who did not. Furthermore, violations of total probability were observed at all timing intervals throughout the study. We further analyzed the results by demonstrating how quantum probability theory can model these types of behaviors in human-AI decision-making and ameliorate the understanding the interaction dynamics at the confluence of human factors and information features.

This study aimed to learn disturbance information to effectively control multiple small unmanned surface vehicles (USVs) for marine research purposes at sea. The learned disturbance information was used to investigate the control of multiple USV swarms based on the leading–following formation technique. Numerous studies have already been conducted on swarm control using drones in the air; however, there has been a paucity of studies on swarm control in the sea. Contrary to swarm control in aviation, the fluid density of the sea is high, and the environment is constantly changing; thus, a robot system would be significantly affected by disturbances. This ultimately influences the maintenance of swarm formations and the accomplishment of missions [1,2]. Therefore, it is difficult to control numerous moving objects while maintaining a formation at sea by using the existing aerial drone swarm control technology. To solve this problem, we learned a long short-term memory (LSTM) model with time-series marine environmental data to predict maritime disturbances. Thereafter, the model was applied to a mission-based position control algorithm of each USV constituting the swarm to design a marine unmanned floating vessel swarm control system that can be applied to various marine environments. Specifically, to effectively control numerous small USVs for marine research purposes, ocean currents are learned using the LSTM algorithm, and the predicted ocean currents are used to generate a swarm USV control system for USV formations. In this study, a control system model of several small USVs equipped with two rear thrusters and a front lateral thruster was designed. The LSTM algorithm was learned using the previous ocean current data, and the velocity of the following ocean currents was predicted. The predictions were then used as a system disturbance to determine the thrust of the controller. To measure ocean currents in the sea when each USV moves, the velocity, azimuth, and position (latitude, longitude) data from the GPS mounted on the USV were used to measure the velocity and direction of the hull's movement. Further, the flow rate was measured using a flow rate sensor on a small USV. The USV movement and position were controlled using an artificial neural network-PID (ANN-PID) controller. This study entailed a comparative analysis of the designed USV model results and those generated by the simulator, including the behavior control rule of the USV swarm and the path of the actual USV swarm at sea. It was verified that the effectiveness of the USV mathematical model and behavior control rules. By comparing the movement path of the swarm USV with and without the disturbance learning algorithm and ANN-PID control algorithm applied to the designed simulator, the position error and maintenance performance of the swarm formation were analyzed, and the application results were compared.

Results from the phase III Keynote-024 clinical trial have established Pembrolizumab monotherapy as the first-line standard of care for patients with metastatic NSCLC who have PD-L1 expression ≥ 50%, EGFR and ALK wild-type. However, given the differences between patients treated in routine clinical practice and within a clinical trial, real-world data are needed to confirm the treatment benefit in standard practice. Given the lack of data on large cohorts of patients with long follow-up, we designed a retrospective observational study of patients with NSCLC who were treated with Pembrolizumab, starting from its reimbursement eligibility until December 2020. The primary endpoints were to assess PFS and OS using the Kaplan-Meier method, treatment response and safety. We followed 880 patients (median follow-up: 35.1 months) until February 2022. Median PFS and OS were 8.6 months (95% CI: 7.6-10.0) and 25.5 months (95% CI: 21.8-31.6), respectively. We also found that ECOG PS, PD-L1 expression and smoking habit were prognostic factors for PFS, while age, sex, ECOG PS, smoking habit and histology had an impact on OS. Multivariable analysis confirms prognostic role of PD-L1 for PFS and ECOG for both PFS and OS. 39.9% of patients reported an adverse event, but only 6.3% of patients discontinued therapy due to toxicity. Our results suggest a long-term benefit of Pembrolizumab in the first-line setting as well as a safety profile consistent with the results of Keynote-042. Many collected variables appear to influence clinical outcome, but results from these exploratory unadjusted analyses should be interpreted with caution.

COVID-19, caused by the SARS-CoV-2 virus, has spread around the world and killed around 6.9 million people. Rapid and accurate diagnosis is essential for preventing and controlling the disease, reducing transmission and consequently saving lives. RT-PCR is the gold standard test used to detect the disease. However, the test is expensive and the result is time-consuming, which makes mass testing difficult, especially in countries with limited resources. In addition, the test has high analytical specificity and low diagnostic sensitivity, which leads to false-negative results. Several studies in the literature report the presence of hematological and biochemical alterations in infected patients and use these alterations with machine learning algorithms to help diagnose the disease. Therefore, this article presents the results obtained by different neural network architectures based on Adaptive Resonance Theory (ART) for the diagnosis of COVID-19. The study was conducted in two distinct stages: the first consisted of selecting the best ART network among several, using three open-access datasets and comparing the results with the literature. In the second stage, the chosen model was tested on a dataset containing patients from various hospitals in four countries. In addition, the model was subjected to external validation, including data from a country not present during the training and adjustment of the model, in order to validate the robustness and generalization capacity of the model. The results obtained by the ART networks in this study are promising, outperforming not only classical models, but also the deep learning models often used in the literature. Validation on data from different countries strengthens the model’s reliability and effectiveness.

Non-impregnated small pore graphite (NSPG) with the compact microstructure for using in molten salt reactors (MSR) was prepared by the novel process, and the pore diameter of the obtained graphite was reduced to ~800 nm. The irradiation evaluation of the prepared graphite was carried out by 7 MeV Xe26+ ion irradiation and the microstructural changes of the graphite were investigated with IG-110 as a comparison. The graphitization degree of NSPG was higher than that of IG-110, though it was not subjected to an impregnation process. Under low-dose ion irradiation (

Postprandial glucose levels between 4 and 7.9 hours (PPG4–7.9h) correlate with mortality from various diseases including hypertension, diabetes, cardiovascular disease, and cancer. This study aimed to assess if predicted PPG4–7.9h could diagnose diabetes. Two groups of participants were involved: Group 1 (4420 participants) had actual PPG4–7.9h, while Group 2 (8422 participants) lacked this measure but had all the diabetes diagnostic measures. Group 1 underwent multiple linear regression to predict PPG4–7.9h using 30 predictors, achieving accuracy within 11.1 mg/dL in 80% of the participants. Group 2 had PPG4–7.9h predicted using this model. Receiver operating characteristic curve analysis showed that predicted PPG4–7.9h could diagnose diabetes with an accuracy of 87.3% in Group 2, with a sensitivity of 75.1% and specificity of 84.1% at the optimal cutoff of 102.5 mg/dL. Simulation on 10,000 random samples from Group 2 revealed that 175 participants may be needed to investigate PPG4–7.9h as a diabetes diagnostic marker with a power of at least 80%. In conclusion, predicted PPG4–7.9h appears to be a promising diagnostic indicator for diabetes. Future studies seeking to ascertain its definitive diagnostic value might require a minimum sample size of 175 participants.

Food-borne transmission is a recognized route for many viruses associated with gastrointestinal, hepatic or neurological diseases. Therefore, it is essential to identify new bioactive compounds with broad-spectrum antiviral activity is needed to exploit innovative solutions against these hazards. Lately, antimicrobial peptides (AMPs) have been recognized as promising antiviral agents. Indeed, while the antibacterial and antifungal effects of these molecules have been widely reported, their use as potential antiviral agents has not yet been fully investigated. Herein, the antiviral activity of previously identified or newly designed AMPs, was evaluated against the non-enveloped RNA viruses, Hepatitis A virus (HAV), and Murine Norovirus (MNV), a surrogate for human Norovirus. Moreover, specific assays were performed to recognize at which stage of the viral infection cycle the peptides could function. Results showed that almost all peptides displayed virucidal effects with about 90% of infectivity reduction on HAV or MNV. However, the decapeptide RiLK1 demonstrated, together with its antibacterial and antifungal properties, a notable reduction in viral infection for both HAV and MNV, possibly through direct interaction with viral particles or inhibition of the viral bonding to the cell receptors. Hence, RiLK1 could represent a versatile ‘antimicrobial agent effective against various foodborne pathogens including viruses, bacteria, and fungi.

(1) Background: The aim of the research was to present and emphasize the importance of magnetic resonance imaging (MRI) in diagnosing Achilles tendon (AT) ruptures by presenting case reports. (2) Materials and Methods: The sample of respondents included 7 patients (4 males and 3 females, 2 athletes and 5 non-athletes), aged 25 to 58 years, with AT injuries, who were examined and treated at the Institute for Treatment and Rehabilitation "Niška Banja", Niš, Serbia. Ankle examinations with MRI were conducted using the Esaote O-scan 0.3 T machine. The examinations were performed without the application of a paramagnetic contrast agent and without the use of anesthesia. Results: The MRI method's sensitivity and overall diagnostic accuracy were excellent, with 100% true positives. In our study, the method accurately detected the presence, location, and severity of AT injuries in all cases. MRI is an important and reliable method for detecting AT injuries, classifying them, monitoring the course of recovery, and assessing the effects of therapy. Conclusions: An unrecognized or delayed diagnosis of an AT injury can lead to chronic changes. Timely diagnosis (clinical examination, ultrasonography, magnetic resonance imaging) and appropriate treatment (conservative or operative) enable patients to return to normal activities, including sports. Unfortunately, the use of MRI is limited by restricted access and the cost of the examination.

Recent research emphasises the importance of Artificial Intelligence applications as supporting tools for students in higher education. Simultaneously, an intensive exchange of views has started in the public debate in the international educational community. However, for a more proper use of these applications, it is necessary to investigate the factors that explain their intention and actual use in the future. With the Unified Theory of Acceptance and Use of Technology (UTAUT2) model, this work analyses the factors influencing students' use and intention to use artificial intelligence technology. For this purpose, a sample of 199 Greek students at the School of Humanities and Social Sciences from the University of Patras participated in a survey. The findings highlight that expected performance, habit, and enjoyment of these Artificial Intelligence applications are key determinants influencing teachers' intentions to use them. Moreover, behavioural intention, habit, and facilitating conditions explain the usage of these Artificial Intelligence applications. The study did not reveal any moderating effects. The limitations, practical implications, and proposed directions for future research based on these results are discussed.

This paper addresses the conceptual exploration of various issues that form an integral part of the ethical dimensions surrounding the use of artificial intelligence (AI) in the field of marketing. We critically review some of the main ethical challenges AI poses to humanity: privacy, data security, bias, transparency, and accountability. Therefore, we will discuss the delicate balance between exploiting the transformation potential of AI for personally designed marketing strategies and ethical imperatives to safeguard the rights of consumers to retain trust. Then, the present regulatory landscape responding to these ethical challenges will be assessed by building on effective regulation, like the GDPR, existing proposed legislative frameworks, and industry guidelines. To underscore the role of an ongoing dialogue between marketers, technologists, ethicists, and regulators for developing a responsible AI ecosystem in marketing. Further, strategic recommendations for implementing company-based ethical AI marketing practices. The further strong guidelines provide enhancement transparency to consumers and investment in research to remove biases from algorithms. It also underscores principal scopes of further research and development, focusing on the need for new-age solutions to guide the ethical quagmires that AI-led marketing throws up. We suggest that integration should be done proactively and collaboratively. Thus, if attention is paid more to ethics and multidisciplinary dialogue, only such hyperbolic promises can be realized by AI-driven marketing. There are such promises through which AI-driven marketing will meet business goals and be huge at societies' values.

In the last century, statistical process control has been considered a successful methodology for monitoring the variability and stability of a process over time. The analysis of variability using functional data analysis has become widespread during the early years of the 21st century. The present study proposes the implementation of a hybrid methodology called functional process control based on the functional data analysis methodology and combines its advantages with those of statistical process control, in order to provide a tool for detecting functional deviations. The phases are: (1) stabilization of processes through the identification and elimination of special causes of functional variability; (2) improvement of the process to be controlled by minimizing the common causes of functional variability; and (3) monitoring of the processes to ensure the maintenance or addition of further improvements.

This paper examines the transformative journey of Artificial Intelligence (AI) agents from copilots to integral coworkers within diverse sectors. Beginning with a foundational overview, we delve into the historical evolution of AI agents, highlighting key technological milestones and the shift from simple automated tools to sophisticated decision-making systems capable of learning and adapting over time. We explore the capabilities of AI agents, including problem-solving, predictive analytics, and automation, and their applications across healthcare, business, and education, showcasing their role in diagnostics, customer service, and personalized learning, among other areas. We also address the integration of AI agents in the workplace, presenting strategies for collaboration between humans and AI, and outline the challenges and ethical considerations that accompany the development and deployment of AI technologies. A comprehensive tutorial provides insight into the development process of AI agents, emphasizing goal definition, data handling, algorithm selection, and ethical guidelines. We also consider the pathway towards Artificial General Intelligence (AGI) and the societal and ethical implications of widespread AI integration, proposing strategies for equitable and ethical AI use.

Utilizing bioinformatics tools, this study expands our understanding of secondary metabolism in Botrytis cinerea, identifying novel genes within polyketide synthase (PKS), non-ribosomal peptide synthetase (NRPS), sesquiterpene cyclase (STC), diterpene cyclase (DTC), and dimethylal-lyltryptophan synthase (DMATS) families. These findings enrich the genetic framework associ-ated with B. cinerea's pathogenicity and ecological adaptation, offering insights into uncharted metabolic pathways. Significantly, the discovery of previously unannotated genes provides new molecular targets for developing targeted antifungal strategies, promising to enhance crop pro-tection and advance our understanding of fungal biochemistry. This research not only broadens the scope of known secondary metabolites but also opens avenues for future exploration into B. cinerea's biosynthetic capabilities, potentially leading to novel antifungal compounds. Our work underscores the importance of integrating bioinformatics and genomics for fungal research, paving the way for sustainable agricultural practices by pinpointing precise molecular interven-tions against B. cinerea. This study sets a foundation for further investigations into the fungus's secondary metabolism, with implications for biotechnology and crop disease management.

Non-Small Cell Lung Cancer (NSCLC) is the most common pulmonary malignancy, most frequently diagnosed at an advanced stage (III/IV). Patients in the Locally-Advanced Stage Subgroup (IIIA) are relatively few, yet compose of heterogenic phenotypes posing a diagnostic and treating challenge, leading to lack of clinical guidelines regarding the optimal standard of care. Several approaches exist, with a general agreement that a combined oncological and surgical modality approach is required. In this current retrospective descriptive study, operable Stage IIIA NSCLC patients who underwent surgery between 2013-2020 were evaluated on several aspects, including initial diagnosis, neoadjuvant regimens, outcomes of surgical intervention, overall survival at 2-years and 5-years following treatment. A total of 35 patients had neoadjuvant oncological treatment (mostly chemoradiation therapy) prior to surgery, out of which 28 patients were diagnosed with Stage IIIA NSCLC. In post-operative assessment of pathological staging, downstaging was reported in 20 patients, of which 7 (25%) cases were defined as complete pathological response. The 2-years overall survival rate was 65% and the 5-years overall survival rate was 60%. The main pattern of disease recurrence was distant metastasis.

Predators are dependent on the capture of prey to meet their energetic and nutritive requirements, imposing a regime of predation risk. Consequently, prey experience both consumptive and non-consumptive effects. Non-consumptive effects may manifest through altered growth and ontogenetic trajectories of prey species, a dynamic modulated by olfactory or other sensory cues from predators. Bactrocera dorsalis Hendel represents a great invasive threat to global horticulture. While earlier research has primarily centered on the consumptive interactions between B. dorsalis and its natural enemies, the potential consequences of non-consumptive interactions on the development of B. dorsalis have been overlooked. In this study, we investigated the impact of predation risk effects, induced by both visual exposure to the predatory mantis Hierodula patellifera Serville and its associated odor, on the life history traits of B. dorsalis. Female B. dorsalis demonstrated reduced development time in the presence of isolated H. patellifera or H. patellifera odor, yet evidenced significantly increased fecundity. Conversely, males displayed no significant change in development time. Additionally, neither female nor male body weight at death was significantly influenced by predation risk from isolated predators or predator odor. These results indicated adaptive developmental strategies of B. dorsalis when faced with risks from predators and highlight the important role of predator odor, which has the potential to lay the groundwork for improving biological control efforts and innovative approaches within pest control.

This enables the chip to regulate the voice recognition function of the gadget, leading to a more natural and human-like process. Integrating this technique into the English language voice recognition system can greatly improve its precision in identifying the speech of a particular person. This research seeks to investigate and create an automatic error detection technique for an embedded speech instruction recognition system for English using artificial intelligence. The study commences with a conventional introduction to artificial intelligence, thereafter delving into a comprehensive investigation of the speech recognition algorithm. The MATLAB programme is used to determine the accurate number of words recognised by the system and its accuracy rate. The embedded teaching recognition system for English is then tested in different contexts to assess its performance. Several tests are performed to compare and analyse the results, which indicate that the integrated English voice recognition system achieves an accuracy rate of over 90% and has a low error rate in a calm environment. In a bustling environment with numerous auditory stimuli, the accurate recognition rate typically exceeds 60%.

Positioning based on wireless signals such as mobile communication networks has become an important means to provide high-precision location services in environments where satellite signals are blocked. In complex environments such as indoor and underground, wireless signal propagation is obstructed and non-line-of-sight (NLOS) phenomena appears due to serious occlusion and reflection. The time delay caused by NLOS effects has little impact on communication system but can significantly increase positioning errors in positioning systems. Therefore, effective suppression of NLOS errors is crucial to improving 5G positioning accuracy. To address the insufficient feature extraction of existing NLOS error suppression methods, the neglect of residual NLOS measurement errors, and poor stability of position estimation results, this paper innovatively proposes a NLOS mitigation and location estimation method for 5G positioning terminals. Simulation and experimental test results demonstrate that the proposed method outperforms the comparative methods both theoretically and practically, achieving an average positioning accuracy of 1.85 meters in complex indoor NLOS environments. The method proposed in this paper provides a new strategy for NLOS error suppression in indoor 5G positioning, which can significantly contribute to high-precision location services based on commercial 5G networks.

The artificial intelligence (AI) refers to the science and engineering of creating intelligent machines for imitating and expanding human intelligence. Given the ongoing evolution of the multidisciplinary integration trend in modern medicine, numerous studies have investigated the power of AI to address orthopaedic-specific problems. One particular area of investigation focuses on the shoulder pathology, which is a range of disorders or abnormalities of shoulder joint, causing pain, inflammation, stiffness, weakness, and reduced range of motion. There has not yet been a comprehensive review of the recent advancements in this field. Therefore, the purpose of this review is to evaluate the current AI applications in the shoulder pathology. This review mainly summarizes several crucial stages of the clinical practice, including predictive models and prognosis, diagnosis, treatment, and physical therapy. In addition, the challenges and future development of AI are also discussed.

In the field of business environments, the integration of novel artificial intelligence (AI) techniques has been identified in the literature and theoretical discourse as an essential catalyst for enhancing the decision-making processes. In the contemporary landscape of digital transformation, the application of these techniques becomes essential, despite encountering various hurdles that impede their seamless integration into the rational decision-making process within e-government, which constitutes a critical component of digital government initiatives. This study explores whether similar advancements can be observed within the e-government sector and investigates the impact of using machine learning (ML) as a technique of artificial intelligence on rational decision-making (RDM). Employing an empirical research approach, the study utilized a quantitative methodology, relying on an electronically structured questionnaire survey administered to 163 employees in the e-government sector in Jordan through purposive random sampling. Data analysis was conducted using the SPSS v25 program, complemented by a media-tion analysis using AMOS v23 software. The research findings revealed a significant contribution of using machine learning to enhance rational decision-making and trust levels, with trust positively impacting RDM. Trust was identified as a beneficial mediator in the relationship between machine learning and rational decision-making. Despite certain limitations, this study's outcomes offer substantial insights for researchers and government policy-makers alike, contributing to the advancement of sustainable practices in the e-government domain.

This study proposes an innovative pharmacovigilance approach, VIGI-4, leveraging ChatGPT Teams Pro version. Our method involves aggregating data from all phase 4 studies published in February 2024 to identify adverse reactions. These results are categorized by disease state alphabetically, demonstrating the method's capacity to generate structured and easily navigable outputs. The results section is tailored to exemplify the valuable, actionable insights attainable through our workflow. This research emphasizes the game-changing potential of integrating advanced technologies such as ChatGPT into pharmacovigilance, signaling a new era in safeguarding drug safety.

Algorithms, indispensable to understand Artificial Intelligence (AI), are omnipresent in social media but users’ understanding of these computational processes and the way they impact their consumption of information is often limited. There is a need for Media and Information Literacy (MIL) research investigating a) how MIL can support Algorithm Literacy (AL) as a subset of competences, and with what working definition, b) what competences users need in order to evaluate algorithms critically and interact with them effectively, and c) how to design learner-centred interventions that foster increased user understanding of algorithms and better response to disinformation spread by such processes. Based on Crossover project research, this paper looks at four scenarios of use by journalists, developers and MIL experts that mirror users’ daily interactions with social media. The results suggest several steps towards integrating AL within MIL goals, while providing a concrete definition of Algorithm-literacy that is experience-based. The competences and design considerations are organised in a conceptual framework thematically derived from the experimentation. This contribution can support AI developers and MIL educators in their co-design of algorithm-literacy interventions and guide future research on AL as part of a set of nested AI literacies within MIL.

In today's world, the significance of reducing energy consumption globally is increasing, making it imperative to prioritize energy efficiency in the 5th Generation (5G) networks. However, it is crucial to ensure that these energy-saving measures do not compromise the Key Performance Indicators (KPIs) such as user experience, quality of service (QoS), or other important aspects of the network. To address this challenge, advanced wireless technologies have been incorporated into the design of 5G networks across various network layers. Given the rapid advancements in Artificial Intelligence (AI) and emerging technology trends such as Machine Learning (ML), which is considered a subset of AI, the integration of such trends into 5G networks has become a significant area of research. The primary objective of this survey is to analyze AI integration into 5G networks for enhanced energy efficiency. By exploring this intersection between AI and 5G, we aim to identify potential strategies and techniques for optimizing energy consumption while maintaining the desired network performance and user experience.

The methods of Artificial Intelligence (AI) have been used in the planning and operation of power systems for more than 40 years. In recent years, due to the development of microprocessor and data storage technologies, the effectiveness of this use has greatly increased. This paper provides a systematic overview of the application of AI including the use of Machine Learning (ML) to the power system. The potential application areas are divided into four blocks and the classification matrix has been used for clustering the AI application tasks. Furthermore, the data acquisition methods for setting the parameters of AI and ML algorithms are presented and discussed in a systematic way considering the supervised and unsupervised learning methods. Based on this, three complex application examples: wind power generation forecasting, smart grid security as-sessment (using two methods), and automatic system fault detection are presented and discussed in detail. Summary and outlook conclude the paper.

The objective of this study is to determine the relationship between body condition score (BCS) and body carcass fat (BCF) of ewes at two key stages of the production cycle. Data were collected from 88 Coopworth ewes including BCS measurements manually evaluated by the farm manager, BCF measurements determined by computerized tomography (CT) and body parameter measurements automatically determined by an image processing application. Artificial neural network (ANN) statistical analysis method was used to develop a relationship between the body parameters and the BCF with an r2=0.96 and RMSE=1.01 using all top and side variables.

This study explores the prediction of concrete compressive strength using machine learning models, aiming to overcome the time-consuming and complex nature of conventional methods. Four models—Artificial Neural Network, Multiple Linear Regression, Support Vector Machine, and Regression Tree—are employed and compared for performance. Evaluation metrics such as Mean Absolute Deviation, Root Mean Square Error, Coefficient of Correlation, and Mean Absolute Percentage Error are used. After preprocessing 1030 samples, the dataset is split into 70% for training and 30% for testing. The ANN model, further divided into training, validation (15%), and testing (15%), outperforms others in accuracy and efficiency. This outcome streamlines compressive strength determination in the construction industry, saving time and simplifying the process.

The recent advancement of Artificial Intelligence (AI) and Machine Learning (ML) tools has had a pervasive effect on every sphere of human existence. Libraries and information centres are not immune to these technological advances. These disruptive technologies have transformed the traditional face of libraries and their operations. There are many available AI tools, for example, chatbots, literature review tools, plagiarism detection tools, and several other developments in the field that have perhaps made the functioning of libraries easier. However, there is growing concern and uncertainty among both traditional library and modern professionals regarding the possible job loss and security issues related to these new technologies, which the professionals must deal with. Librarians and information professionals must be ready to handle the unforeseen situation. However, it is to be observed how libraries cope with these uncertainties, and threats to the integrity, availability of data, and normal library housekeeping functions.

In our investigation of the time evolution of energy states Einstein’s interpretation from more than a century ago is found to have greater internal consistency than that of non-relativistic quantum mechanics. We choose to align more closely with his methods by abandoning the non-relativistic Hamiltonian method, which has been the standard for nearly a century, in favor of a relativistically correct Lagrangian method. Integral equations of motion for the absorption and emission of radiation are derived that underlie and anticipate the differentially motivated Schrödinger equation. This new interpretation applies to a large volume of experimental evidence of both classical and quantum mechanical origin. Among the examples discussed in support are Planck’s law describing black body radiation, matrix mechanics, the function of the simplest quantum mechanical system an electron cyclotron, chaos theory, and evolutionary biology.

The identification of fetal cells in the blood and tissues of healthy mothers raised questions about the potential alloreactive origins of various diseases, such as autoimmunity, diabetes, arteriosclerosis, and cancer. However, the extent to which alloreactivity contributes to these diseases remains unverified. This study presents a basic mathematical disease model based on the genes’ origin and immunological interactions. This model, grounded in set theory, classifies these immunological interactions based on their intrinsic, extrinsic, and allogeneic nature. Therefore, this model offers an unexpected common theoretical foundation for understanding alloreactivity, genetic diseases, and infections. Furthermore, this model provides a valuable framework for scrutinizing the role of alloreactivity in health and disease.

All types of sports are potential application scenarios for automatic and real-time visual object and event detection. In rink hockey, the popular roller quad skate variant of hockey team sports, it is of great interest to automatically track player’s movements and positions, player’s sticks and, also, making other judgments, such as being able to locate the ball. In this work, we introduce a real-time pipeline composed by an object detection model, created specifically for rink hockey games, followed by a knowledge-based event detection module. Even in the presence of occlusions and quick motions, our deep learning object detection model effectively identifies and tracks, in real-time, important visual elements such as: ball; players; sticks; referees; crowd; goalkeeper; and goal. Using a curated dataset composed by a collection of videos of rink hockey, comprising 2525 annotated frames, we trained and evaluated the algorithm performance and compare it to state of the art object detection techniques. Our object detection model, based on YOLOv7, presents a global accuracy of 80%, and presents a good performance in terms of accuracy and speed, according to our results, making it a good choice for rink hockey applications. In our initial tests, the event detection module successfully detected one important event type in rink hockey games, the occurrence of penalties.

In an era where dietary habits significantly impact health, technological interventions can offer personalized and accessible food choices. This paper introduces Chef Dalle, a recipe recommen-dation system that leverages multimodal human-computer interaction (HCI) techniques to pro-vide personalized cooking guidance. The application integrates voice-to-text conversion via Whisper, ingredient image recognition through GPT-Vision, and employs TF-IDF vectorization alongside cosine similarity for personalized recipe recommendations. These methods enable users to interact with the system using voice, text, or images, accommodating various dietary re-strictions and preferences. Furthermore, the utilization of DALL-E 3 for generating recipe images enhances user engagement. User feedback mechanisms allow for the refinement of future rec-ommendations, demonstrating the system's adaptability. Chef Dalle showcases potential appli-cations ranging from home kitchens to grocery stores and restaurant menu customization, ad-dresses accessibility, promoting healthier eating habits. This paper underscores the significance of multimodal HCI in enhancing culinary experiences, setting a precedent for future developments in the field.

In our study, we investigated the prognostic significance of hematological markers—NLR (Neutrophil-to-Lymphocyte Ratio), PLR (Platelet-to-Lymphocyte Ratio), and RDW-CV (Red Blood Cell Distribution Width - Coefficient of Variation)—in 117 glioblastoma patients. Data collected from January 2016 to December 2018 included demographics, clinical scores, and treatment regimens. Unlike previous research, which often examined these markers solely before surgery, our unique approach analyzed them at multiple stages: preoperative, postoperative, and before adjuvant therapies. We correlated these markers with overall survival (OS) and progression-free survival (PFS) using statistical tools, including ANOVA, Cox regression, and Kaplan-Meier survival analyses, employing SPSS version 29.0. Our findings revealed notable variations in NLR, PLR, and RDW-CV across different treatment stages. NLR and PLR decreased after surgery, with some stabilization post-STUPP phase (NLR: p=0.007, η2p=0.06; PLR: p=0.001, η2p=0.23), while RDW-CV increased post-surgery and during subsequent treatments (RDW-CV: p < 0.001, η2p=0.67). Importantly, we observed significant differences between the preoperative phase and other treatment phases. Additionally, higher NLR and RDW-CV at the second-line treatment and disease progression were associated with an increased risk of death (NLR at 2nd line: HR=1.03, p=0.029; RDW-CV at progression: HR=1.14, p=0.004). We proposed specific marker cutoffs that demonstrated significant associations with survival outcomes when applied to Kaplan-Meier survival curves (NLR at 2nd line < 5: p<0.017; RDW-CV at progression < 15: p=0.007). Elevated NLR and RDW-CV at later treatment stages correlated with poorer OS and PFS. No significant preoperative differences were detected. These biomarkers may serve as non-invasive tools for glioblastoma management.

The opportunities and advantages of implementing Artificial Intelligence (AI) and Machine Learning (ML) to optimize the process control of wastewater treatment in the Oil and Gas industry are discussed in this work. Discussion is centered around five major points: 1) Various types of Oil and Gas wastewater (Sour, Oily, Produced) and industry standards/methods for treatment, including specific case studies and challenges when treating certain wastewater. This section aims at the common types of wastewater in the Oil and Gas industry and how they are generally treated. 2) How AI/ML has been implemented in wastewater treatment in various industries; summary of which AI/ML languages were used along with a brief overview of how they work. This article focused on an understanding of the specific case studies and AI explanations to understand the effectiveness of wastewater treatment using AI/ML. 3) AI that is currently implemented in Oil and Gas such as personal protective equipment (PPE), smartwatches radiofrequency identification etc. This showed that AI/ML already plays a successful role in the Oil and Gas industry and has proven to help optimize many processes and components. Many of these AI/ML implementations are now industry standards and have greatly benefitted the industry. This section demonstrates that the implementation and the use of AI/ML have been proven to be a successful endeavor and that expanding the role of AI/ML would be beneficial. 5) Using the established points from the previous sections the paper outlines why AI/ML is ideal for Oil and Gas wastewater treatment; this argument centers around fit-for-purpose treatment, and the possible uses of the treated water. A determination of the best-suited AI languages, possible implementation scenarios, and how this would shift the way Oil and Gas industries treat and approach wastewater is presented to the reader.

Porous β-tricalcium phosphate (Ca3(PO4)2; β-TCP) was prepared by freeze-drying and the effects of this process on pore shapes and sizes were investigated. Various samples were prepared by freezing β-TCP slurries above a liquid nitrogen surface at −180 °C with subsequent immersion in liquid nitrogen at −196 °C. These materials were then dried under reduced pressure in a freeze-dryer after which they were sintered by heating. Compared with conventional heat-based drying, the resulting pores were more spherical, which increased both the mechanical strength and porosity of the β-TCP. These materials had a wide range of pore sizes from 50 to 200 µm, with the mean and median values both approximately 100 µm regardless of the freeze-drying conditions. Mercury porosimetry data showed that the samples contained small, interconnected pores with sizes of up to 1.24 µm and macroscopic, interconnected pores up to 25.8 µm in size. The effects of non-ionic surfactants having different hydrophilic/lipophilic balance (HLB) values on foaming and pore size were also investigated. Materials made with surfactants having lower HLB values exhibited smaller pores and lower porosity whereas higher HLB surfactants gave higher porosity and slightly larger macropores. Even so, the pore diameter could not be readily controlled solely by adjusting the HLB value. The findings of this work indicated that high porosity (75%) and good compressive strength (>2 MPa) can both be obtained in the same porous material and that foaming agents with HLB values between 12.0 and 13.5 were optimal.

Meat serves as a vital component of the human diet, offering a rich source of protein and essential trace elements. China stands as both a significant producer and consumer of meat on a global scale, leading the world in terms of total meat production and consumption. As the standard of living within the country continues to rise, there is a growing emphasis on the nutritional value and safety of meat consumption. The tenderness of meat is a critical factor influencing its overall quality. Traditionally, tenderness has been assessed through shear force testing, a method that is inherently destructive, inefficient, and results in considerable sample wastage. In light of these drawbacks, non-destructive testing techniques have emerged as a preferred alternative, promising greater accuracy, efficiency, and convenience without compromising the integrity of the samples. This paper delves into the application of five advanced non-destructive testing technologies in the realm of meat tenderness assessment. These include near-infrared spectroscopy, hyperspectral imaging, Raman spectroscopy, airflow optical fusion detection, and nuclear magnetic resonance detection. Each technology is scrutinized for its respective strengths and limitations, providing a comprehensive overview of their current utility and potential for future development. Moreover, the integration of these techniques with the latest advancements in artificial intelligence (AI) technology is explored. The fusion of AI with non-destructive testing offers a promising avenue for the development of more sophisticated, rapid, and intelligent systems for meat tenderness evaluation. This integration is anticipated to significantly enhance the efficiency and accuracy of quality assessment in the meat industry, ensuring a higher standard of safety and nutritional value for consumers. The paper concludes with a set of technical recommendations aimed at guiding the future direction of non-destructive, AI-enhanced meat tenderness detection, thereby contributing to the ongoing improvement of the meat industry in China and beyond.

Artificial intelligence (AI) refers to computer algorithms that replicate the cognitive function of humans. Machine learning is widely applicable using structured and unstructured data, while deep learning is derived from the neural networks of the human brain that process and interpret information. During the last decades, AI has been introduced in several aspects of healthcare. In this review, we aim to present the current application of AI in the neonatal intensive care unit. AI-based models have been applied to neurocritical care, including automated seizure detection algorithms and electroencephalogram-based hypoxic-ischemic encephalopathy severity grading systems. Moreover, AI models evaluating magnetic resonance imaging contributed to the progress of the evaluation of the neonatal developing brain and the understanding of how prenatal events affect both structural and functional network topologies. Furthermore, AI algorithms have been applied to predict the development of bronchopulmonary dysplasia and assess the extubation readiness of preterm neonates. Automated models have been also used for the detection of retinopathy of prematurity and the need for treatment. Among others, AI algorithms have been utilized for the detection of sepsis, the need for patent ductus arteriosus treatmnet, the evaluation of jaundice, and the detection of gastrointestinal morbidities. Finally, AI prediction models have been constructed for the evaluation of the neurodevelopmental outcome and the overall mortality of neonates. Although the application of AI in neonatology is encouraging, further research in AI models is warranted in the future including retraining clinical trials, validating the outcomes, and addressing serious ethics issues.

Macro-autophagy (autophagy hereafter) is an evolutionarily conserved cellular process that has long been recognized as an intracellular mechanism for maintaining cellular homeostasis. It involves the formation of a membraned structure called the autophagosome, which carries cargo that includes toxic protein aggregates and dysfunctional organelles to the lysosome for degradation and recycling. Autophagy is primarily considered and studied as a cell-autonomous mechanism. However, recent studies have illuminated an underappreciated facet of autophagy, i.e., non-autonomously regulated autophagy. Non- autonomously regulated autophagy involves the degradation of autophagic components, including organelles, cargo, and signaling molecules, and is induced in neighboring cells by signals from primary adjacent or distant cells/tissues/organs. This review provides insight into the complex molecular mechanisms governing non-autonomously regulated autophagy, highlighting the dynamic interplay between cells within tissue/organ or distinct cell types in different tissues/organs. Emphasis is placed on modes of intercellular communication that include secreted molecules, including microRNAs, and their regulatory roles in orchestrating this phenomenon. Furthermore, we explore the multidimensional roles of non-autonomously regulated autophagy in various physiological contexts, spanning tissue development and aging, as well as its importance in diverse pathological conditions, including cancer and neurodegeneration. By studying the complexities of non-autonomously regulated autophagy, we hope to gain insights into the sophisticated intercellular dynamics within multicellular organisms, including mammals. These studies will uncover novel avenues for therapeutic intervention to modulate intercellular autophagic pathways in altered human physiology.

Non-isocyanate polyurethane synthesis by non-Sn catalysis is an essential challenge toward green polyurethane synthesis. Bismuth compounds are attractive candidates due to their low cost, low toxicity, and availability to urethane chemistry. We applied various Bi catalysts to the self-polycondensation of a bishydroxyurethane monomer and found BiCl3 to be an excellent catalyst through optimization. The catalytic activity and price of BiCl3 are comparable to those of Bu2SnO, while its toxicity is significantly low. BiCl3 is, therefore, a promising alternative to Sn-based catalysts in non-isocyanate polyurethane synthesis.

The construction industry has a notable negative impact on the environment; thus, the promotion of the use of timber structures is an alternative to mitigate its effects. The research develops an artificial intelligence-based decision approach in the calculation of timber structures focused on the enhancement of the sustainability of roof structures. Based on the optimization carried out through genetic algorithms and the framework established in Eurocode 5, a general set of equations has been proposed for a laminated timber roof structure. The tool, which determines the most suitable roof structure for each strength class of laminated timber, allows for the determination of the dimensions of beams and purlins and their respective separations in order to minimize wood consumption. The ultimate goal is to offer multiple solutions regarding strength classes and structural designs in order to foster informed sustainable choices that promote efficient use of resources in construction.

Aiming to improve medical diagnosis and treatment, artificial intelligence (AI) has emerged as a transformational force in the healthcare industry. In this article, we examine how AI is increasingly being used to improve healthcare, with an emphasis on how it is changing medical diagnosis and treatment. We explore the opportunities, threats, and ethical concerns of incorporating AI into healthcare practice. In addition, we feature important AI applications in radiology, pathology, cardiology, and cancer. AI has great potential to improve patient outcomes, diagnostic accuracy, and the ability to provide individualized treatment plans in the future if it is used and refined with care.

: Image guided superficial radiation therapy (IGSRT) combines superficial radiation therapy (SRT) with full dermal visualization (FDV) via high resolution dermal ultrasound (HRDUS) for the treatment of non-melanoma skin cancer (NMSC). The gold standard for IGSRT delivery includes a comprehensive cancer care model with support for the dermatologists by a multidisciplinary team. When delivered in this model, IGSRT can achieve cure rates of 99% for treatment of NMSC. This paper focuses on the benefits of IGSRT during therapy. Medical records from 7 dermatology clinics of 883 patients with 1,507 cases of NMSC treated with IGSRT be-tween 2017 and 2018 were retrospectively reviewed. 92% of the NMSC lesions showed daily depth fluctuations, 60.32% of lesions did not require changes during therapy, and nearly 40% of lesions required at least one compensatory change during therapy. 83% of NMSC lesions were labeled high-risk based on the 2024 NCCN guidelines. Increasing and decreasing tumor depth measurements during IGSRT inform dermatologists when adaptive changes in energy (kV), TDF and dose will result in more efficacy and less toxicity, respectively.

Lead optimization in drug discovery is a crucial phase where initial hits are refined into compounds with improved pharmacological properties. While traditional methods rely on manual experimentation and modifications, AI-driven techniques have revolutionized this process by leveraging big data and predictive modeling. This review explores how AI-driven approaches accelerate lead optimization, showcasing examples like deep neural networks and reinforcement learning. Integration of multi-omic data and experimental validation further enhances AI-driven strategies. The future lies in refining these AI methods, democratizing tools, and interdisciplinary collaboration to streamline drug discovery and address medical needs efficiently.

The shortage of physicians in rural communities contributes to increased mortality rates among Medicare beneficiaries. This increase in mortality risk is commonly due to diseases such as heart disease and cancer, including melanoma and non-melanoma skin cancer (NMSC). Mohs micrographic surgery (MMS) is considered the gold-standard treatment for NMSC tumors, however, due to a shortage of dermatologists and Mohs surgeons in rural areas, access to MMS is limited. In these areas, image guided superficial radiation therapy (IGSRT) serves as a viable option for the treatment of NMSC lesions, with fewer recurrences and 99% cure rates, which are comparable to MMS cure rates. IGSRT is performed in dermatology clinics with support from a multidisciplinary team, including radiation therapists, medical physicists, radiation oncologists, and dermatologists. As IGSRT is able to be performed by general dermatologists, Medicare beneficiaries in rural communities will have an increase in access to treatment options and a decrease in delayed skin cancer treatment.

Objectives: The purpose of the study was to evaluate the effectiveness of dental caries segmentation on the panoramic radiographs taken from children in primary dentition, mixed dentition, and permanent dentition with an Artificial Intelligence (AI) models developed using the deep learning method. Methods: This study used 6075 panoramic radiographs taken from children aged between 4 and 14 to develop the AI model. The radiographs included in the study were divided into three groups as primary dentition (n: 1857), mixed dentition (n: 1406), and permanent dentition (n: 2812). U-Net model implemented with PyTorch library was used for segmentation of caries lesions. Confusion matrix was used to evaluation of model performance. Results: In the primary dentition group, the sensitivity, precision and F1 scores calculated using the confusion matrix were found to be 0.8525, 0.9128, and 0.8816, respectively. In the mixed dentition group, the sensitivity, precision, and F1 scores calculated using the confusion matrix were found as 0.7377, 0.9192, and 0.8185, respectively. In the permanent dentition group, the sensitivity, precision, and F1 scores calculated using the confusion matrix were found as 0.8271, 0.9125, and 0.8677, respectively. In the total group including primary, mixed, and permanent dentition, the sensitivity, precision and F1 score calculated using the confusion matrix were 0.8269, 0.9123 and 0.8675, respectively. Conclusion: Deep learning-based AI models are promising tools for the detection and diagnosis of caries in panoramic radiographs taken from children in different dentitions.

The recent past has witnessed a growing interest in technologies for creating chatbots. Advances in Large Language Models for natural language processing are underpinning rapid progress in chatbot development, and experts predict revolutionary changes in the labour market as many manual tasks are replaced by virtual assistants in a range of business functions. As the new technology becomes more accessible and advanced, more companies are exploring the possibilities of implementing virtual assistants to automate routine tasks and improve service. This article reports on qualitative inductive research undertaken within a chatbot development team operating in a major international enterprise. The findings identify critical success factors for chatbot projects, and, based on the in-depth case study, a model is put forward to aid the manageability of chatbot implementation. The presented model can serve as an exemplar guide for researchers and practitioners working on the design, development and implementation of virtual assistants. It is flexible and applicable in a wide range of business contexts, linking strategic business goals with execution steps. It is particularly applicable for teams with no experience of chatbot implementation, reducing uncertainty and managing decisions and risks throughout the project lifecycle, thereby increasing the likelihood of project success.

The vast majority of antibodies generated against a virus will be non-neutralising1. However, this does not denote an absence of protective capacity. Yet, within the field there is typically a large focus on antibodies capable of directly blocking infection (neutralising antibodies, nAbs) of either specific viral strains or multiple viral strains (broadly-neutralising antibodies, bnAbs). More recently, a focus on non-neutralising antibodies (nnAbs), or neutralisation-independent effects of nAbs, has emerged. These can have additive effects on protection or in some cases, be a major correlate of protection. As their name suggests, nnAbs do not directly neutralise infection but instead, through their Fc domains, may mediate interaction with other immune effectors to induce clearance of viral particles or virally infected cells. nnAbs may also interrupt viral replication within infected cells. Developing technologies of antibody modification and functionalisation may lead to innovative biologics that harness the activities of nnAbs for antiviral prophylaxis and therapeutics. In this review, we discuss specific examples of nnAb actions in viral infections where they have known importance. We also discuss the potential detrimental effects of such responses. Finally, we explore new technologies for nnAb functionalisation to increase efficacy or introduce favourable characteristics for their therapeutic applications.

This study innovatively assesses the Mun River flow components in Thailand, integrating Artificial Neural Networks (ANN) and Isotopic (18O) End-Member Mixing Analysis (IEMMA). It quantifies the contributions of the Upper Mun River (UMR) and Chi River (CR) to the overall flow, revealing a discrepancy in their estimated contributions. ANN predicts the UMR and CR contribute approximately 70.1% and 29.5% respectively, while IEMMA indicates a more pronounced disparity with 84% from UMR and 16% from CR. This divergence highlights the distinct perspectives of ANN, focusing on hydrological data patterns, and IEMMA, emphasizing isotopic signatures. Despite discrepancies, both methods validate UMR as a significant contributor to the overall flow, highlighting their utility in hydrological research. The findings underscore the complexity of river systems and advocate for an integrated approach of river flow analysis for a comprehensive understanding, crucial for effective water resource management and planning.

Gestational diabetes mellitus (GDM) is a hyperglycemia state that is typically diagnosed by an oral glucose tolerance test (OGTT), which is unpleasant, time-consuming, poorly reproducible, and tardy. The machine learning (ML) predictive models that have been proposed to improve GDM diagnosis are usually based on instrumental methods that take hours to get a result. Near-infrared (NIR) spectroscopy, a simple, fast and low-cost analytical technique has never been assessed for the prediction of GDM. This study aims to develop ML predictive models for GDM based on NIR spectroscopy, and to evaluate their potential as early detection or alternative screening tools according to their predictive power and time of analysis. Serum samples from the first (before GDM diagnosis) and the second (at the time of GDM diagnosis) trimester of pregnancy were analyzed by NIR spectroscopy. Four spectral ranges were considered, and 80 pretreatments were tested for each. NIR data-based models were built with single- and multi-block ML techniques. Every model was subjected to double cross-validation. The best first and second trimester models got areas under the receiver operating characteristic curve of 0.5768 ± 0.0635 and 0.8836 ± 0.0259, respectively. This is the first study reporting NIR spectroscopy-based methods for the prediction of GDM. The developed methods allow to predict GDM from 10 µL of serum in only 32 minutes. They are simple and fast, and have a great potential to be applied in clinical practice, especially as alternative screening tools to the OGTT at the time of GDM diagnosis.

This paper presents the development of a novel anti-violence device titled "no pAIn" (an acronym for Never Oppressed Protected by Artificial Intelligence Nonviolence system), which harnesses the power of artificial intelligence (AI). Primarily designed to combat violence against women, the device offers personal safety benefits for individuals across diverse demographics. Operating autonomously, it necessitates no user interaction post-activation. The AI engine conducts real-time speech recognition and effectively discerns genuine instances of aggression from non-violent disputes or conversations. Facilitated by its Internet connectivity, in the event of detected aggression, the device promptly issues assistance requests with real-time precise geolocation tracking to predetermined recipients, for immediate assistance. Its compact size enables discreet concealment within commonplace items like candy wrappers, or within purpose-built casings, or as wearable accessories. The device is battery-operated. The prototype was developed using a microcontroller board (Arduino Nano RP2040 Connect), incorporating an omnidirectional microphone and Wi-Fi module, all at a remarkably low cost. Subsequent functionality testing, performed in debug mode using the Arduino IDE serial monitor, yielded successful results. The AI engine exhibited exceptional accuracy in word recognition, complemented by a robust logic implementation, rendering the device highly reliable in discerning genuine instances of aggression from non-violent scenarios

Background: With its impressive natural language processing and comprehension skills, ChatGPT-4 (Chat Generative Pre-Trained Transformer) is a technology that shows great promise for use in a number of medical fields. This article provides a thorough description of the possible uses of OpenAI's state-of-the-art language model, ChatGPT-4, in musculoskeletal imaging. Purpose for review: MSK Radiologists need to evolve about their knowledge and understanding of the roles of ChatGPT and its implications in daily practice. We aim to emphasize the advantages of ChatGPT-4 on the musculoskeletal imaging field and its potential to enhance radiologist working checklist review items, and the overall productivity of radiology reports. Recent findings: The fact of that specialists in radiology, rheumatology, orthopedic surgery, and other fields are conversant with ChatGPT. Furthermore, opinions are generally well, despite the fact that many people have reservations about the new technology, which is still developing ^[1]. Compared to GPT-4V based ChatGPT, GPT-4 based ChatGPT showed noticeably better diagnostic accuracy. Although ChatGPT, which is based on GPT-4, performed diagnostically on par with radiology residents, however, it demonstrated lower performance than a musculoskeletal radiologist ^[2].

The prevalence of Noncommunicable Diseases (NCDs) in South Africa is increasing annually, with the burden projected to escalate by 2030. Devastatingly, factors such as lifestyle changes, urbani- sation, and an aging population significantly contribute to a rising burden of Cardiovascular disease (CVDs), diabetes, and cancer which directly impact the mortality and morbidity rates seen in South Africa. Recognising this, the South African government has seen the need for emphasis on developing policies and interventions tar- geting physical inactivity to prevent and manage NCD, particularly cost-free and easy to administer training protocols. However, phys- ical inactivity remains a significant issue, leading to various health concerns in rural communities, including injuries and Fetal Alcohol Spectrum Disorders (FASD). Despite effort to promote physical ac- tivity, the prevalence of NCDs continues to rise, necessitating target- ed interventions to ensure equitable healthcare among South African citizens. On the Contrast, preservation and promotion of traditional games is vital as they offer indigenous populations accessible and culturally relevant means to maintain health and wellness. In this regard, it is important to recognize the importance of preserving and promoting traditional games as they potentially serve as a method for indigenous people to maintain their health and wellness in a way that is accessible and culturally relevant to them. These games have gained popularity in South Africa, with initiatives underway to show- case them globally fostering cultural exchange. Further, revitalizing and conserving these games can cultivate a culture of health and wellbeing in South Africa.

Background Nigeria is among the top 5 countries that have the highest gap between people reported as diagnosed and estimated to have developed Tuberculosis (TB). To bridge this gap, there is a need for innovative approaches to identify geographical areas at high risk of TB transmission and targeted Active Case Finding (ACF) interventions. Leveraging community level data together with granular sociodemographic contextual information can unmask local hotspots which could be otherwise missed. This work evaluated if this approach helps to reach communities with higher numbers of undiagnosed TB. Methodology A retrospective analysis of the data generated from an ACF intervention program in 4 south-western states in Nigeria was conducted. Wards (the smallest administrative level in Nigeria) were subdivided into further smaller population clusters. ACF sites and their respective TB screening outputs were mapped to these population clusters. This data was then combined with open-source high resolution contextual data to train a Bayesian inference model. The model predicted TB positivity rates on the community level (population cluster level), and these were visualised on a customised geoportal for use by the local teams to identify communities at high risk of TB transmission and plan ACF interventions. The TB positivity yield (proportion) observed at model-predicted hotspots was compared with the yield obtained at other sites identified based on aggregated notification data. Results The yield in population clusters that were predicted to have high TB positivity rates by the model was at least 1.75 times higher (p-value <0.001) than the yield in other locations in all four states. Conclusion The community level Bayesian predictive model has the potential to guide ACF implementers to high TB positivity areas for finding undiagnosed TB in the communities, thus improving efficiency of interventions.

The healthcare situation in Africa is characterized by limited resources and a high burden of disease, presenting significant challenges to the healthcare systems in the region. The integration of Artificial Intelligence (AI) technologies in African healthcare holds immense potential for addressing these challenges and improving health outcomes. This paper aims to provide a comprehensive understanding of the current healthcare landscape in Africa and the urgent need for AI-driven solutions.In addition to discussing the potential applications of AI in African healthcare, such as disease diagnosis, treatment planning, and medical imaging analysis, this manuscript seeks to shed light on the specific challenges hindering the implementation of AI in the region. By providing detailed examples and case studies, we aim to offer insights into the obstacles that need to be overcome and potential solutions that can be pursued.By leveraging AI technologies, Africa has the opportunity to revolutionize its health systems, bridging the gap in access to quality healthcare across the continent. The objective of this review article is to not only highlight the potential benefits that AI can bring to African healthcare but also to emphasize the urgent need for action and collaboration in implementing and scaling up AI innovations in the region. By doing so, African countries can pave the way for improved health outcomes and ensure that their populations receive the healthcare services they deserve.