We propose a novel moving median estimator specifically designed for online detection of threshold crossings in multi-channel signals, such as extracellular neural recordings. This estimator offers two key advantages: a reduced sensitivity to outliers and the elimination of memory requirements for storing arrival times. Furthermore, its design facilitates parallel implementation on FPGAs, making it ideal for real-time processing of multi-channel recordings.

The mortality of birds resulting from collisions and electrocutions with overhead lines, such as power lines, and phone line among others, has been implicated in the decline of various avian species globally. Specifically, overhead line collisions pose a significant threat to the conserva-tion of the Canarian houbara bustard (Chlamydotis undulata fuertaventurae), an endangered sub-species endemic to the Canary Islands. This study centres on the postmortem findings of Canarian houbara bustards that have collided with overhead lines, providing insights into the post-collision outcomes for these birds. A com-plete standardized necropsy of nine Canarian houbara bustards revealed that polytrauma was the cause of death in all cases. The most notable gross lesions associated with trauma included bone fractures, soft tissue lacerations, haemorrhages, luxations, and hemocoelom, with certain body regions being more frequently affected. Histopathology, immunohistochemistry, and en-tomology analysis confirmed that numerous birds survived the initial trauma, exhibiting varia-ble survival intervals before succumbing to their injuries. We concluded that when a houbara bustard collide with an overhead line it frequently survives the initial trauma. The histopathology, immunohistochemistry, or entomologic analysis may be helpful to approximate the timing interval between trauma and death.

When a grid-forming (GFM) inverter is connected to a low or medium voltage weak power grid, the line impedance with resistive-inductive characteristics will cause power coupling. Typical GFM decoupling control strategies are designed under nominal line impedance parameters. However, there are deviations between the nominal line impedance and actual parameters, resulting in poor decoupling effects. Aiming at this problem, this paper proposes a power decoupling strategy based on a reduced-order extended state observer (ESO). Firstly, the power dynamic model of GFM is established based on the dynamic phasor method. Then, the model deviation and power coupling due to line impedance parameter perturbation are estimated as internal disturbances of the system, and the disturbances are compensated on the basis of typical power control strategy and virtual impedance decoupling. Good decoupling performance is obtained under different impedance parameters, improving the control strategy's robustness. Finally, the effectiveness of the proposed method is verified by the results of RT Box hardware-in-the-loop experiments.

Recent advancements in semiconductor photonic and electronic devices such as Uni-travelling-carrier photodiodes (UTC-PDs), have played a significant role in the development of Terahertz communication technology. However, a major challenge that still persists is the limited output power from a single UTC-PD required for practical transmission distances. To enhance the output power, we propose and demonstrate a novel Terahertz wave power combining technique using a photomixer device that comprises of two arrayed UTC-PDs monolithically integrated with a microstrip line-based 2 × 1 Wilkinson power combiner and a rectangular patch antenna on a Silicon Carbide (SiC) substrate at 300 GHz. At photocurrents of 8 mA and 10 mA from the two UTC-PDs, the device experimentally exhibited a 7.3 dB increase in power relative to the power obtained with 8 mA UTC-PD and a 4.4 dB increase in power relative to the power obtained with 10 mA UTC-PD, when both UTC-PDs were irradiated. This implies that power can be enhanced by a factor of N2 if the photocurrent is multiplied by a factor of N. This technology presents a holistic and cutting edge platform for further power multiplication by further increasing the number of arrayed UTC-PDs.

Undernutrition and micronutrient deficiencies such as anemia are considered significant public health challenges in Bangladesh, which enhancing fish consumption is a well-established food-based intervention to address these. This paper documents the establishment of community-based fish chutney production and reports the impact of its consumption on mid-upper arm circumference (MUAC) and hemoglobin (Hb) levels among targeted 150 pregnant and lactating women (PLW) in rural Bangladesh. A fish chutney was developed using locally available ingredients followed by a series of laboratory tests, including nutrient composition, shelf-life and food safety. A community-based fish chutney production process was designed to: 1) supply locally available ingredients for processing; 2) establish two fish drying sites; 3) initiate a community-based production site, and 4) distribute fish chutney to PLW by six women nutrition field facilitators for one year. Then a pre- and post-intervention study was designed for a selected 150 PLW to receive 30g of fish chutney daily for 12 months. Differences in mean mid-upper arm circumference (MUAC) and hemoglobin (Hb) levels pre- and post-consumption were analyzed using one-way analysis of variance. Consumption of 30g of fish-chutney resulted in significant increases of the mean values of Hb levels and MUAC among the targeted PLW.

Seeing atomic configuration of single organic nanoparticles at sub-Å spatial resolution by transmission electron microscopy has been so far prevented by the high sensitivity of soft matter to radiation damage. The difficulty is related to the need to irradiate the particle with a total dose of few electrons/Å2, not compatible with the electron beam density necessary to search the low-contrast nanoparticle, to control its drift, to finely adjust the electro-optical conditions and particle orientation, and to finally acquire an effective atomic resolution image. On the other hand, the capability to study individual pristine nanoparticles, such as proteins, active pharmaceutical ingredients, and polymers, with peculiar sensitivity to the variation of the local structure, defects, and strain, would provide advancements in many fields, including materials science, medicine, biology, and pharmacology. Here we report direct sub-ångström resolution imaging at room temperature of pristine unstained crystalline polymer-based nanoparticles. This result is obtained by combining low-dose in-line electron holography and phase-contrast imaging on state-of-the-art equipment, providing an effective tool for the quantitative sub-angstrom imaging of soft matter.

Electrification of society, increasing renewable energy sources and mobility charging lead to new loading patterns for power transformers. Dynamic load conditions induce enhanced mechanical stress on the transformers’ windings, potentially causing degradation of the solid insulation over time and compromising the transformer's short-circuit withstand capability. Thermal expansion of the windings, caused by losses in the copper conductors, occurring as the transformer is load-ed, increases the stress. Conversely, magnetic losses in the core and tie plate expansion contribute to a reduction in stress. This paper presents the effect of step changes in core losses and copper losses by on-line measurements of the clamping pressure, to better understand the mechanical stresses acting upon the solid insulation cellulose materials.

Typhoons bring great damages to transmission line systems located in coastal areas. Strong wind and extreme precipitation are the main sources of damaging effects. Transmission lines suffered from wind-driven rain exhibit more susceptibility to damage due to the coupled effect of wind and rain water. This paper presents an integrated numerical simulation framework based on mesoscale WRF model, multiphase CFD model and FEM model to analyze the motions of a transmission line subjected to coupled wind and rain loads during typhoon events. A full-scale transmission line in Zhoushan island is employed to demonstrate the effectiveness of the proposed framework by simulating typhoon evolution in terms of wind fields and rainfall, solving the coupled wind and rain fields around the conductor and predicting the dynamic responses of the transmission line during Super Typhoon Lekima (2019). The results show that the horizontal displacements of the transmission line under the joint actions of wind and rain increases approximately 17%~18% compared to those of wind loads only. It is important to consider the coupled effects of wind-driven rain on conductors in the design of transmission lines under typhoon conditions.

Positioning based on wireless signals such as mobile communication networks has become an important means to provide high-precision location services in environments where satellite signals are blocked. In complex environments such as indoor and underground, wireless signal propagation is obstructed and non-line-of-sight (NLOS) phenomena appears due to serious occlusion and reflection. The time delay caused by NLOS effects has little impact on communication system but can significantly increase positioning errors in positioning systems. Therefore, effective suppression of NLOS errors is crucial to improving 5G positioning accuracy. To address the insufficient feature extraction of existing NLOS error suppression methods, the neglect of residual NLOS measurement errors, and poor stability of position estimation results, this paper innovatively proposes a NLOS mitigation and location estimation method for 5G positioning terminals. Simulation and experimental test results demonstrate that the proposed method outperforms the comparative methods both theoretically and practically, achieving an average positioning accuracy of 1.85 meters in complex indoor NLOS environments. The method proposed in this paper provides a new strategy for NLOS error suppression in indoor 5G positioning, which can significantly contribute to high-precision location services based on commercial 5G networks.

κ Draconis is a binary system with a classical Be star as the primary component. Its emission-line spectrum consists of hydrogen lines, notably the Hα line with a peak intensity ratio (V/R) variations phase-locked with the orbital period P = 61.55 days. Among binaries demonstrating the Be phenomenon, κ Dra stands out as one of a few systems with a discernible mass of its secondary component. Based on more than 200 spectra obtained in 2014 − 2023, we verified the physical parameters and constructed the mass function. We used part of these data obtained in 2014 − 2021 to investigate regions in the circumstellar disk of the primary component that emit the Hα line using the Doppler tomography method. The results show that the disk has a non-uniform density distribution with a prominent enhancement at Vy≈ 99 km s−1 and Vx≈−6 km s−1 that corresponds to a cloud-like source of the double-peaked Hα line profile. We argue that this enhancement’s motion is responsible for the periodic variations of the Hα V/R ratio, which is synchronised in orbital phase with the radial velocity (RV) of absorption lines from the atmosphere of the primary component.

Deep Neural Network (DNN) inference demands substantial computing power, resulting in significant energy consumption. A large number of negative output activations in convolution layers are rendered zero due to the invocation of the ReLU activation function. This results in a substantial number of unnecessary computations that consume significant amounts of energy. This paper presents ECHO: Energy-efficient Computation Harnessing Onilne Arithmetic - A MSDF-based accelerator for DNN inference, designed for computation pruning, utilizing an unconventional arithmetic paradigm known as online/ most-significant digit first (MSDF) arithmetic which performs computations in a digit-serial manner. The MSDF digital serial computation of online arithmetic enables overlapped computation of successive operations leading to substantial performance improvements. The online arithmetic, coupled with a negative output detection scheme, facilitates early and precise recognition of negative outputs. This, in turn, allows for the timely termination of unnecessary computations, resulting in a reduction of energy consumption. The implemented design has been realized on the Xilinx Virtex-7 VU3P FPGA and subjected to a comprehensive evaluation through a rigorous comparative analysis involving widely used performance metrics. Experimental results demonstrate promising power and throughput improvements compared to contemporary methods. In particular, the proposed design achieved an average improvement in power consumption of up to 81%, 82.9%, and 40.6% for VGG-16, ResNet-18, and ResNet-50 workloads compared to the conventional bit-serial design, respectively. Furthermore, significant average speedups of 2.39×, 2.6×, and 2.42 were observed when comparing the proposed design to conventional bit-serial designs for VGG-16, ResNet-18, and ResNet-50 models respectively.

Transition from basic to higher education is regarded as a ‘juggle of many balls’ because students ought to balance between theoretical and clinical requirements, including social life. As a result, a significant number of undergraduate first-year nursing students succumb to these challenges due to lack of coping mechanisms emanating from poor resilience. As a result, the aim of this study was to determine the factors that influence resilience among undergraduate first-year nursing students at a South African university. A quantitative cross-sectional descriptive research design was followed. Data was collected using an adapted self-administered online questionnaire. Principal component analysis extraction method and Varimax rotation were used to analyse data. A total of 123 participants completed the questionnaire. The eigenvalues showed that the first factor explained 23.9% of the variance, the second factor 11.2%, a third factor 7.5% while the fourth factor explained 5.9% of the variance. The fifth until the eight factor had eigenvalues greater than 1 but less than 2. This study showed that resilience can be dependent on various factors such as lecture support, parental support, academic achievement, peer and mentor support, optimism about the future and being self-determined.

High-precision dynamic positioning of highway vehicles is the foundation and prerequisite for achieving intelligent connected transportation. For the shortcomings of GNSS/INS combination and GNSS/INS/OD combination in tunnel vehicle positioning, this paper proposes a tunnel vehi-cle positioning method of GNSS/INS/OD combination based on lateral distance measurement and lane constraint. Firstly, lateral distance measurement of vehicles inside the tunnel is conducted based on laser radar point cloud data. Secondly, map matching positioning is performed based on lateral distance measurement, odometer, and lane markings. Experimental results demonstrate that for a 4.6 km tunnel, the average absolute error of lateral positioning is 0.294 meters, and the longitudinal positioning error is no more than 0.6 meters, which can effectively meet practical operational requirements.

This work presents the mathematical framework of the Second-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Response-Coupled Forward/Adjoint Linear Systems (abbreviated as “2nd-CASAM-L”), which enables the most efficient computation of exactly obtained mathematical expressions of first- and second-order sensitivities of a generic system response with respect to functions (“features”) of model parameters. Subsequently, the first- and second-order sensitivities with respect to the model’s uncertain parameters, boundaries, and internal interfaces are obtained analytically and exactly, without needing large-scale computations. Within the 2nd-FASAM-L methodology, the number of large-scale computations is proportional to the number of model features (defined as functions of model parameters), as opposed to being proportional to the number of model parameters, which are considerably more than the number of features, being incomparably more efficient and more accurate than any other methods (statistical, finite differences, etc.) for computing exact expressions of response sensitivities (of any order) with respect to the model’s features and/or primary uncertain parameters, boundaries, and internal interfaces. The application of the 2nd-CASAM-L methodology is illustrated using a simplified energy-dependent neutron transport model of fundamental significance in nuclear reactor physics.

Antioxidant, anti-inflammatory and chemo-preventive features have been reported for the carotenoid diatoxanthin. Diatoxanthin is only produced by a few groups of microalgae where it functions in photoprotection. Its large-scale production in microalgae is currently not feasible. In fact, rapid conversion into the inactive pigment diadinoxanthin is triggered when the cells are removed from the high-intensity light source, which will be the case during large-scale harvesting of microalgae biomass. Zeaxanthin epoxidase (ZEP) 2 and/or ZEP3 have been suggested to be responsible for the back-conversion of high-light accumulated diatoxanthin to diadinoxanthin in low light in diatoms. Using the CRISPR/Cas9 gene editing technology we knocked out the ZEP2 and ZEP3 genes in the already commercially used marine diatom Phaeodactylum tricornutum to investigate their role in the diadinoxanthin-diatoxanthin cycle, and to determine if one of the mutant strains could function as a diatoxanthin production line. Light shift experiments proved that ZEP3 encodes the enzyme converting diatoxanthin to diadinoxanthin in low light. Loss of ZEP3 caused the high-light accumulated diatoxanthin to be stable for several hours after the cultures had been returned to low light, suggesting that zep3 mutant strains could be suitable as commercial production lines of diatoxanthin.

This paper studies the maximum reliability of multi-hop relay UAV, in which UAV provides wireless services for remote users without direct communication link on the ground as a coded cooperative relay. In this paper, the analytical expressions of total power loss and total bit error rate are derived as reliability measures. Firstly, based on the environmental statistical parameters, a LOS probability model is proposed. Then the problem of minimizing the bit error rate of static and mobile UAVs is studied. The goal is to minimize the total bit error rate by jointly optimizing the height, elevation, power and path loss, and subject to the maximum allowable path loss con-straints, transmission power allocation constraints and UAV height and elevation constraints. At the same time the total path loss is minimized to achieve maximum ground communication cov-erage. However, the formulated joint optimization problem is non-convex and generally difficult to solve. Therefore, we decomposed the problem into two subproblems and proposed an effective joint optimization iteration algorithm. Finally, the simulation results are given, and the analysis shows that the optimal height of different reliability measures is slightly different, and using the mobility of UAVs can improve the reliability of communication performance.

A novel compressible real gas 1D finite volume thermofluid network modelling methodology is proposed that can be applied in the analysis of supercritical CO₂ (sCO2) power cycles. It is applied to simulate centrifugal compressor performance via a mean line approach that directly solves the mass, energy, and momentum balance equations for the discretized flow channels within the machine along with the associated loss models, component characteristics, and applicable compressible real gas equation of state. This can be integrated seamlessly with the rest of the power cycle components like pipes, valves, heat exchangers, etc., thereby eliminating the need for static performance maps and the associated difficulties to ensure similarity over the whole range of operation. This direct simulation of the internal flows also makes it possible to do integrated cycle design optimization that includes the geometry of the compressors, and to simulate fast transients for dynamic analysis. The methodology was applied to simulate well-documented air and sCO2 centrifugal compressors and compared the generated results with that of conventional thermofluid network incompressible and compressible ideal gas approaches. The results indicate that the proposed compressible real gas approach can capture the stagnation pressure changes and isentropic efficiencies with good accuracy for both cases over the whole range of mass flow rates and shaft rotational speeds. In contrast, the conventional thermofluid network incompressible and compressible ideal gas approaches are only applicable in selected regions of the fluid property regime and suffer from discretization errors and inappropriate treatment of the relationship between stagnation and static pressures. Furthermore, comparative analyses between the newly proposed approach and the traditional mechanical energy balance method are performed, showing that the latter approach needs to be discretized more finely through the compression process to correctly capture the polytropic compression path shape, whereas the former more accurately captures the stagnation pressure changes through the analyzed compressors with only a single increment per compressor component.

Many corporations have now revised their value statements to showcase their commitment to sustainable development and green business due to the pressing issues of climate and environmental damage. Despite the importance of value statements that can direct companies to achieve sustainable goals, what kind of values can be perceived as organizational orientations to sustainability remains unknown. This study explores how the general public views the inclusion of sustainable components in value statements from the listed companies in Hong Kong by using Q-sort methodology (n = 30). Analyzing the final sample of 40 value statements extracted from 27 listed companies, we identified three factors related to sustainability, namely, Empowering business process management, Empowering customer-centric excellence, and Empowering sustainable progress. This study provides an additional component to the traditional triple bottom line by suggesting that internal operation of a company is an emerging idea to understand corporate sustainability.

Data on Stark broadening parameters, spectral line widths and shifts, for 15 multiplets of N VI, which spectral lines are broadened by collisions with electrons, protons, alpha particles (He III) and B III, B IV, B V and B VI ions, are presented. They have been calculated, using the semiclassical perturbation theory, for temperatures from 50,000 K to 2,000,000 K, and perturber densities from 1016 cm−3 up to 1024 cm−3. These data are particularly of interest for the analysis and modelling of atmospheres of hot and dense stars, as e.g. white dwarfs, and for investigation of their spectra, but also for analyis ad modelling of laser driven plasma in proton-boron fusion research.

Background: Several studies recently confirmed the emergence of resistance to antimalarial drugs in sub-Saharan Africa. Multiple first-line treatment (MFT) is one of the measures envisaged to respond to the emergence and spread of this resistance. The aim of this study was to identify perceived advantages and disadvantages of several MFT deployment strategies and to better understand potential implementation drivers and barriers. Methods: A qualitative survey was conducted in seven sub-Saharan countries amongst key opinion-leaders, national decision-makers, and end users. A total of 200 individual interviews were conducted and findings were analyzed following a thematic inductive approach. Results: From a policy perspective, the new MFT intervention would require endorsement at the global, national, and regional levels to ensure its inclusion in guidelines. Funding of the MFT intervention could be a bottleneck due to costs associated with additional training of healthcare workers, adaptation of drug delivery mechanisms, and higher costs of drugs. Concerning the MFT deployment strategies, a slight preference for the segmentation strategy was expressed over the rotation and geographic approaches, due to the perception that a segmentation approach is already in place at country level. Conclusions: The findings highlighted the need for a collective approach to MFT deployment through the engagement of stakeholders at all levels of malaria management.

Significant changes to the new National College Entrance Examination (NCEE) and the implementation of the “Double First-Class” (DFC) initiative in China are coincidentally in the national spotlight and fall within the same policy window. However, few studies have investigated the effects of the new NCEE on the quality of students in DFC universities. By leveraging the 2018-2022 college admission data from Shandong Province, these effects are examined via the interrupted time-series technique. Weighted rankings for liberal arts and science disciplines and the admission ranking coefficient are adopted to ensure comparability before and after the reform. The findings reveal that after the reform, the quality of students in both world-class universities and first-class discipline universities improved, with greater improvements seen in world-class universities. Focusing on urban differences, the quality of students in DFC universities located in second-tier cities is found to have experienced a higher increase as compared with students in the first-tier and new first-tier cities. In addition, the reform has had different impacts on the quality of students in different majors. Furthermore, when selecting postsecondary institutions, high-scoring students prioritize the quality of universities and majors over urban factors. Finally, the implications of the new NCEE in relation to a sustainable development of DFC universities for research, policy, and practice are further discussed.

Quantum cryptography revolutionizes secure information transfer, providing defense against both quantum and classical computational attacks. The primary challenge in extending the reach of quantum communication comes from the exponential decay of signals over long distances. Addressing this challenge, we have developed Quantum-protected Control-based Key Distribution (QCKD), overcoming transmission range limitations by monitoring signal leakages and rendering leaked quantum states significantly non-orthogonal. This paper reports on the experiments with the QCKD, conducted over a 1,707 km fiber line. We demonstrate advancements in critical components of the protocol, showing its remarkable scalability and adaptability for extended distances and multi-user configurations.

The structural, elastic, and electronic properties of orthorhombic Cd2SiO4 and Hg2GeO4 were examined under varying pressure conditions using first-principles calculations based on densi-ty-functional theory employing the projector augmented wave method. The obtained cell pa-rameters at 0 GPa were found to align well with existing experimental data. We delved into the pressure-dependence of normalized lattice parameters and elastic constants. In Cd2SiO4, all lat-tice constants decreased as pressure increased, whereas in Hg2GeO4, parameters a and b de-creased while parameter c increased under pressure. Employing the Hill average method, we calculated the elastic moduli and Poisson’s ratio up to 10 GPa, noting an increase with pressure. Evaluation of ductility/brittleness under pressure indicated both compounds remained ductile throughout. We also estimated elastic anisotropy and Debye temperature under varying pres-sures. Cd2SiO4 and Hg2GeO4 were identified as indirect band gap insulators, with estimated band gaps of 3.34 eV and 2.09 eV, respectively. Interestingly, Cd2SiO4 exhibited a significant increase in band gap with increasing pressure, whereas the band gap of Hg2GeO4 decreased under pres-sure, revealing distinct structural and electronic responses despite their similar structures.

In Spain, the National Health System, of a public nature, provides care to Spaniards and other residents in Spain. It is a system adapted to the State of Autonomies, decentralized. Each Auton-omous Community has legislative capacity in its organization and management. We studied the agreement of private hospitals by the public system in La Rioja, an Autonomous Community of Spain located in the North of the Iberian Peninsula. Documentary sources from the General archives of La Rioja, the Institute of Riojan Studies, municipal funds (Logroño, Haro, Calahorra), and in-formation from catalogs and censuses of hospitals from the Ministry of Health, National Institute of Statistics, and Institute of Statistics of La Rioja have been reviewed. The hospital model of La Rioja is characterized by a predominance of public beds over private ones, although there is a growing trend in the number of private beds from 2013 onwards, due to the incorporation of two conva-lescent socio-health hospitals. A characteristic element of La Rioja has been the promotion of pub-lic-private collaboration, conceived as a strategic alliance. Regarding agreements, in La Rioja there has been a specialization in the socio-health space, whose formulas have been the management service contract and the concession of work. The development of the Health System in La Rioja, 1986-2019, has been determined by the presence of a mixed public-private hospital system and a progressively lower dependence on specialized hospitals from other Autonomous Communities.

The existence of low-cost and accurate tools that can equip the First Responders (FRs) to detect trapped victims and provide insights about their health condition in the aftermath of a disaster, is imperative. To address the problem of detecting trapped victims behind walls or debris, we have developed a tool that exploits an Ultra-Wide Band (UWB) radar sensor for data collection and Machine Learning (ML) algorithms for data analysis. To evaluate the efficacy of our approach, we collected data from nine humans, both in standing and lying down positions. Next, we applied various ML algorithms to the collected dataset for two discrete sub-tasks that are of interest from an FR’s perspective. The first task is the detection of the victim’s presence, where the algorithms attained more than 95% accuracy and F1-Score. The second task is the estimation of the distance between the radar sensor and the victim, where the tool showed an average error of less than 40 cm.

It has been theorized that black holes are surrounded by firewalls, although there is not universal agreement concerning this. We first review basic concepts pertaining to Schwarzschild black holes and Hawking radiation. Then we discuss the anticipation of Hawking radiation—albeit from non-black holes—initially by R. C. Tolman and shortly thereafter with P. Ehrenfest. We compare evaporation into a vacuum at absolute zero (0 K) of black holes with that of non-black holes, and show that not only black holes but also non-black holes evaporate within a finite time. The times required for evaporation of black holes and non-black holes are compared. Next, we show that (i) if firewalls exist, they can originate via Hawking radiation at the minimum possible ruler distance (the Planck length) beyond the Schwarzschild horizon, where it has not suffered any gravitational redshift, or, alternatively, suffered maximal gravitational blueshift and (ii) the firewall temperature is on the order of the Planck temperature, independently of the mass and hence also of the Schwarzschild radius of a Schwarzschild black hole. We then explain the exponential nature of the gravitational frequency shift as a function of the gravitational potential. Next, we consider the firewall-mass problem, and provide an at least prima facie tentative resolution thereto based on: (i) the mass of a firewall being canceled by the negative gravitational mass = (negative gravitational energy)/c² accompanying its formation, (ii) the unchanged observations of a distant observer upon formation of a firewall, and (iii) Birkhoff's Theorem (actually first discovered by Jørg Tofte Jebsen). We then consider one aspect of thermodynamics in gravitational fields, showing that equilibrium relativistic gravitational temperature gradients cannot be exploited to violate the Second Law of Thermodynamics.

An optical frequency comb (OFC) generator based on an electro-optic Talbot laser and cross-phase modulation (XPM) in a high nonlinear fiber (HNLF) is designed and demonstrated. The Talbot laser is an electro-optic frequency shifting loop to produce repetition rate multiplied pulses, and these pulses working as a pump signal induce XPM process in the HNLF to modulate the phase of a probe signal. At the output of the HNLF, OFCs with a multiplied line-spacing can be generated. The effects of the pump power and the HNLF length on the performance of the generated OFCs are theoretically analyzed. In the experiments, the line-spacing of the generated OFCs is respectively multiplied to be 10 GHz, 15 GHz and 20 GHz with a factor of 2, 3 and 4. The center of the OFCs is tuned in a 4-nm range by adjusting the wavelength of the probe signal.

This research concerns the virtual reconstruction and technical constructive analysis of the emblematic and disappeared Matriz church of Ambato city, whose structure was demolished after the collapse of its vaults in the 1949 earthquake, about which it was said to have had deficiencies in its construction. Through an exhaustive historical review of documents and images, its constructive hypothesis was achieved, and using photogrammetry technique, its virtual reconstruction was obtained, where, through the interpretation and understanding of the generated plans, the verification of its technical and constructive characteristics associated with its hypothetical mechanical behavior inherent to its stone construction was carried out. For the structural study, the principle of the Limit Analysis of Structures was used, where through a graphic static approach, the technical stability conditions of a masonry structure are established, in this case, to give an interpretation to the possible poor execution of the church's work, and eventual cause that could have contributed to the collapse of its vaults.

The outstanding occurrences of red wood ant nests (RWA; Formica rufa-group) at two study sites in the Oberpfalz, NE Bavaria, Germany, could be confirmed by the 2023 re-inventory (a total of 5,393 nests and an increase by ≈8 %). RWA nests preferred mature and medium mature pine-dominated forests. Standing and downed dead wood do not negatively influence nests. Nest counts with woodpecker cavities and the diversity of the herb layer increased. The highly clustered nests in NW-SE direction suggests a strong interaction between nests distributions and the tectonic environment. Our developed (re-)inventory approach in combination with the comprehensive photo database is a valuable tool for a) monitoring the entire forest habitat including woodpecker cavities and dead wood in, at and around nests, and b) identifying GeoBio-Interactions. Such a comprehensive approach leads to more accurate and realistic counts of RWA nests during (re-)inventories and provides scientific evidence of the status quo of RWA occurrence. Our results disproved the unfounded and scientifically unsubstantiated blanket statement by laymen of the ASW Landesverband Bayern e.V. that RWA nest numbers in the Oberpfalz or even in the entire Bavaria are in sharp decline. We suggest seven to eight years as a suitable time interval for re-inventories.

In patients with schizophrenia, metabolic syndrome is associated with cognitive impairments. We carried out a second analysis of data from a longitudinal trial to examine the relationship between weight gain and cognitive function in patients with first-episode schizophrenia (FES) over the first 6-month antipsychotic treatment. Baseline and 6-month endpoint measurements were taken for both cognitive function and body weight. Linear and logistic regression analyses were applied to investigate the bidirectional relationship between weight gain and cognitive function. Clinically relevant weight gain (CRW) was defined as an increase in body weight ex-ceeding 7%. The final analysis included 337 participants. Lower baseline scores in processing speed (OR=0.837, p=0.007), working memory and attention (OR=0.889, p=0.043), and executive function (OR=0.863, p=0.006) domains were significantly associated with CRW at the 6-month endpoint. After adjusting for confounders, CRW was found to be associated with improvement in the Brief Visuospatial Memory Test (p=0.036). The findings suggest that patients with lower baseline cognitive performance experienced more substantial weight gain. Conversely, weight gain was correlated with cognitive improvements, particularly in the domain of visual learning and memory. This suggested a potential bidirectional relationship between weight gain and cog-nitive function in patients with first-episode schizophrenia.

In vitro glucose uptake in yeast cell facilitated by Abelmoschus esculentus L. (okra seed) for management of type 2 diabetes was studied. Plant material was collected, identified, processed, and stored for further use. 80% methanol was employed for extraction and sonicated to release antidiabetic-bioactive component in solution and was filtered, concentrated, freeze-dried, and fractionated using standard techniques. Glucose uptake at an initial concentration of 5mM/L and 10mM/L by the crude extract was consistent to that of the known standard drug while at 25mM/L glucose concentration was equivalent with the crude extract. Also, at 0.625 mg/mL the linear equations, and R2 demonstrations that the crude extract was higher in dose predictability than the standard drug as presented by the equation; y = 35.754x - 57.822, and R² = 0.9502 (95%). The extract-fractions were employed to evaluate the ability of yeast cell line culture to take up glucose from the system through DPPH, FRAP, lipid peroxidation and anti-diabetes effect of extract-fraction assays. Extract-fractions were found to poses antioxidant activity high enough to inhibit stress-related diseases. The extract fractions were active as drug candidates both at low and high concentrations and were better compared with the standard drug and standard antioxidant was comparable. The high bioactive extract fractions require encapsulation with a nanoparticle as a drug candidate for type 2 diabetes patients. And an animal trial of the drug candidate may be necessary to monitor the in vivo performances of the extract fractions and subsequent human volunteered trial.

We propose a method for creating parallel Bessel-like vortical optical needles with an arbitrary axial intensity distribution via superposition of different cone-angle Bessel vortices. We analyze the interplay between the separation of individual optical vortical needles and their respective lengths and introduce a super-Gaussian function as their axial profile. We also analyze the physical limitations to observe well-separated optic needles, as they are influenced by mutual interference of the individual beams. To verify our theoretical and numerical results, we generate controllable spatial arrays of individual Bessel beams with various numbers and spatial separations by altering the spectrum of the incoming laser beam via the spatial light modulator. We demonstrate experimentally how to implement such beams using a diffractive mask. The presented method facilitates the creation of diverse spatial intensity distributions in three dimensions, potentially finding applications in specific microfabrication tasks or other contexts. These beams may have benefits in laser material processing applications such as nanochannel machining, glass via production, modification of glass refractive indices, and glass dicing.

In this study, we evaluated the antibacterial effect against Staphylococcus aureus and Salmonella Typhimurium in fried fish paste using floating electrode-dielectric barrier discharge (FE-DBD) plasma (1.1 kV, 43 kHz, N2 1.5 m/s, 1-60 min). In addition, quality evaluation (pH, VBN) of fried fish paste was conducted after FE-DBD plasma treatment. When FE-DBD plasma was treated for 1, 5, 10, 20, 30 and 60 min, S. aureus decreased by 0.16-1.13 log10 CFU/g, and S. Typhimurium decreased 0.25-1.13 log10 CFU/g. Both decreased > log10 CFU/g at 60 min. The D-value was 58.92 and R2 was 0.97 for S. aureus using first-order kinetics, and the D-value was 43.60 and R2 was 0.97 for S. Typhimurium using the Weibull model. There was no significant difference in pH after FE-DBD plasma treatment (p > 0.05). However, volatile basic nitrogen (VBN) significantly decreased as the treatment time increased (p < 0.05), and it was the lowest at 60 min to 3.46. Therefore, FE-DBD plasma treatment could be considered as a technology for preserving the quality of processed foods.

In the context of the French tertiary decree, it is crucial to reduce the energy consumption of buildings by first addressing the design of the electrical architecture. Implementing Direct Current (DC) nanogrids in buildings could offers a promising advantage for energy efficiency, significantly impacting overall energy consumption and sustainability goals. For an insulated area with a subtropical climate, such as La Réunion island, DC nanogrids could also facilitate the insertion of local renewable energy sources, especially solar energy. This article presents the deployment and efficiency evaluation of an end-to-end Low Voltage Direct Current (LVDC) nanogrid, from conception to real-world installation within a company. The nanogrid consists of a photovoltaic power plant, a Lithium-Iron-Phosphate (LFP) battery, and DC end-use equipment such as LED lighting and DC fans for two individual offices. An innovation is provided for the power supply and energy management of terminal equipment using the Power Over Ethernet (PoE) standard IEEE 802.3bt. The efficiency of the nanogrid is measured to be 40% higher than the efficiency of an installation powered by PV and distributed at 230 VAC. These results are obtained under certain deployment conditions, which are discussed in this article, in order to enhance the energy efficiency of buildings by using 48VDC. The nanogrid hardware and software infrastructure, the methodology employed for efficiency quantification and the measurement results are described in the paper.

Purpose: The aim of the study is an approach to a nanocomposite with copper nanoparticles, constituting a bacteriostatic surface for maintaining the human lung cells' function. Methods: The polyelectrolyte layer coating with copper nanoparticles incorporated was designed. As a bacteriostatic factor, copper nanoparticles were applied as a colloidal solution of copper nanoparticles (ColloidCuNPs) and solution of copper nanoparticles (CuNPs). The influence of polyelectrolytes on selected Gram(+) and Gram(-) strains was examined. The function of the human adenocarcinoma A549 cell line of epithelial human lung cells cultured in the presence of nanocomposite layer coatings was analyzed, as well as their morphology using flow cytometry, fluorescence microscopy, and scanning electron microscopy. In addition, the material of layer coating was assessed using AFM and SEM-EDX characterization. Results: It was observed that polyelectrolytes polyethylenimine and poly-L-lysine do not induce proliferation of E.coli strain. On the other hand, it induces the proliferation of S. aureus strain. Due to CuNPs effectiveness against E.coli strain, CuNPs were selected for further research. The designed coatings at proper NPs share sustained the function of human lung cells cultured within 10 days of culture. The AFM and EDX characterization confirmed copper presence in the layer coating nanomaterial. The presence of CuNPs in polyethyleneimine-based nanocomposite deepens the bacteriostatic effect on E. coli compared with PEI alone. Meanwhile, incorporating CuNPs in PLL at share allowed A549 cell maintenance, did not exert a bacteriostatic influence on the examined strain.Conclusion: The platform based on polyelectrolytes incorporated with copper nanoparticles ensuring the growth and morphology of the human lung epithelial cells can be considered an element of the system components for medical devices for maintaining the human lung cells' function.

Using the h-index to assess individual researchers is not only unethical and unfair but also inaccurate and misleading. This index fails to offer a reliable measure of a researcher's impact based on their citation scores. Beyond statistical and conceptual considerations, authorship practices, especially in the case of multi-authored publications, give rise to significant problems that often go unnoticed. While some modifications of the h-index have been proposed to mitigate these weaknesses, the fundamental deficiencies persist. Most of these flaws have been effectively addressed by the c-score, a composite citation index. The c-score excludes self-citations, normalizes the number of citations by considering the number of authors in each paper, and takes into account first, single, and last authorship. This approach provides a more realistic measure of the impact of each individual researcher based on raw citations.

Primary failure of eruption (PFE) is a rare non-syndromic condition involving total or partial non-eruption of posterior teeth, in the absence of mechanical obstruction. This paper presents the case of a healthy girl referred at age 4 years for asymmetry of upper arch. Clinical examination confirmed a slight shift of the upper midline to the left, with no erupted teeth distal to the upper left canine and left posterior open bite. Panoramic X-ray showed delayed intra-osseous development of lateral left upper teeth compared to the right side. Clinic and radiographic follow-up during the next 9 years showed that 26 has not erupted by almost 13 years of age, 27 has delayed development and an unusual shape and there is agenesis of 24, 25. Genetic analysis using the PTH1R single gene sequencing did not detect any known disease-causing or rare pathogenic variants that could explain the patient's phenotype. Even when detected early, PFE rises difficult problems with regard to diagnosis and ortho-surgical treatment planning due to the impossibility to accurately predict the evolution. Tooth agenesis on the same arch worsens the prognosis and adds challenges to planning the treatment. Close long-term follow-up and timely adjustment of treatment plan in accordance to the evolution of the case are needed.

New insights into the causes and mechanisms of congenital heart disease (CHD) have been gained through the use of next-generation sequencing. Examination of the whole exome sequence detects detrimental gene variations modifying single or contiguous nucleotides, that are characterised as pathogenicity based on statistical assessments of families. and correlates with congenital heart disease, elevated expression during heart development, and reduction of harmful protein-coding mutations in the general population. Patients with CHD and extracardiac abnormalities enriched for gene classes meeting these criteria. CHDs and extracardiac defects, supporting a common set of pathways in the organogenesis of CHDs. Single-cell transcriptomics data reveal the expression of genes associated with CHD in specific cell lineages, and emerging evidence suggests that genetic variants disrupt multicellular genes essential for cardiogenesis. Metrics and units are being tracked in whole genome sequence studies.

(1) Background: Since fullerene C60 is insoluble in water and is toxic, it is not applicable in biomedicine and cosmetics. For this reason, the first derivative FD-C60 (fullerenol) was synthesized, which solved the problem of solubility in water and partially reduced toxicity. In order to maximally reduce toxicity and increase biomedical efficiency, the second derivative SD-C60 (3HFWC- Hyper-Harmonized-Hydroxylated Fullerene Water Complex), was created. (2) Methods: In order to obtain the most reliable data, several different methods are applicable in the characterization of FD-C60 and SD-C60 with water layers (NIR, FTIR, 13C-NMR,  1H-NMR, TGA/DTA, XRD, AFM/MFM etc.). (3) Results: FD-C60 as an individual structure is about 1.3 nm in size, while SD-C60 as an individual structure is 1030 nm in size. The aforementioned methods showed that SD-C60 contains water layers, which explains the difference between those two structures in the physicochemical properties, and their effects on biomolecules. (4) Conclusions: Based on the above methods and techniques, FD-C60 and SD-C60 are two different substances in terms of size, structure, and physicochemical properties; FD-C60 at 100C has endothermic characteristics and SD-C60 at 133C has exothermic characteristics, FD-C60 possesses water molecules only from humidity, while SD-C60 has water molecules from both humidity and extra water molecules in layers, the zeta potential of FD-C60 is -25.85 mV, while it is -43.29 mV for SD-C60.

In this study, we propose an efficient field-free line (FFL) generator for mechanically driven FFL-magnetic particle imaging (MPI) applications. The novel FFL generator comprises pairs of Halbach arrays and bar magnets. The proposed design generates high-gradient FFLs with low-mass permanent magnets, realizing fine spatial resolutions in MPI. We investigate the generated magnetic field using simulations and experiments. Our results show that the FFL generator yields a high gradient of 4.76 T/m at a cylindrical field of view of 30 mm diameter and a 70 mm open bore. A spatial resolution of less than 3.5 mm was obtained in the mechanically driven FFL-MPI.

Stochastic modelling of geometrically imperfect steel frame structures requires inputs of statistical values of the imperfection parameters, in some cases also with suitably selected mutual correlations between these input parameters. The paper presents a verification study of two stochastic methods to directly model the initial global geometrical imperfections of the steel frame structures. The stochastic input values of geometrical imperfections are derived from the tolerance criteria of the corresponding European Standard. Two advanced stochastic methods have been developed, referred as #RSS (random story sway) and #RSP (random story position). These methods are verified using random sampling simulations. This study provides useful provisions for the advanced numerical analyses of multi-story steel frames of various geometries. The proposed methods are verified for equidistant story heights and for structures of up to 24 stories, hence might be used for the most types of the standard steel frame structures.

Cognitive linguistics is founded on the assumption that language is a reflection of universal cognitive principles, implying that all cognitive processes share a common origin. This assumption is known as the 'Cognitive Commitment.' The present article examines the sensory schema hypothesis, which traces all forms of expression back to sensations. This theoretical framework integrates the physicality of the body with sensations that underlie human experiences and their linguistic and non-linguistic expressions. By challenging the traditional dichotomy between mind and body, it provides a more integrated understanding.

A novel quasi-twisted miniaturized wideband Branch Line Coupler (BLC) is proposed. The design is based on bisecting the conventional microstrip line BLC transversely and folding bisected sections on double-layered substrates with a common ground plane in between. The pair of quarter wavelength horizontal parallel arms is converted to a Z-shape meandered microstrip line in the designed structure. On the other hand, the pair of quarter wavelength vertical arms are cut by half into two lines and converted to a periodically loaded slow wave structure. The bisected parts of BLC are placed on the opposite side of the doubled-layer substrate and connected through four vias passing through the common ground plane. This technique enabled a compact BLC size of 6.4×18 mm2, which corresponds to a surface area miniaturization by ~50% as compared to the classical BLC size of 10×23 mm2 at 6GHz, Moreover, the attained relative bandwidth is 73.9% (4.6-10 GHz) for S11, and 75.8% (4.5-10 GHz) for S33 as compared to 41% for the ordinary BLC at the same resonant frequency. The circuit is constructed on a double-layered low-cost FR4 substrate with a relative permittivity of 4.3, and a loss tangent of 0.025. An isolation of -13dB was realized in both S13 and S31 demonstrating an excellent performance. The transmission coefficients between input/output ports S21, S41, S23, and S43 are between -3.1dB to -3.5dB at the frequency of 6GHz. Finally, the proposed BLC provides phase differences between output ports of 90.5o and 94.8o at the frequency of 6GHz when the input ports 1 and 3 are excited, respectively. The presented design offers the potential of being utilized as a unit cell for building a Butler-matrix (BM) for sub-6GHz 5G beamforming networks.

In a Water-Cooled Lithium-Lead (WCLL) Breeding Blanket (BB), the heat generated by the plasma thermal radiation and nuclear reactions is removed mainly by two components; namely, the First Wall (FW) and the Breeding Zone (BZ). The FW faces the neutrons and charged particles fluxes generated by the fusion reactions and the thermal radiation coming from the plasma. The present work takes into account the FW cooling system inspired by the WCLL BB 2018 design of DEMO 2017 baseline. Unlike the baseline where a Pressurized-Water Reactor (PWR) setup is used for the coolant, various setup between the Boiling Water Reactor (BWR) and the High-Pressure (HP) BWR are studied in the present work operating in the Two-Phase Flow (TPF) regime. The 3D model of the FW in the WCLL BB 2018 design is simplified into a 1D model and a steady state analysis is carried out to optimize the mass flow rate of the water and the number of parallel channels at the BB cells at different poloidal locations of the reactor, which helps not only in reducing the used coolant but also in improving the Tritium Breeding Ratio (TBR). The present work takes into account forced convection in the liquid only region, the subcooled boiling region, and the saturated boiling region using suitable empirical or semi-empirical models from the literature. The results are validated against the existing results in the literature. In the end, related conclusions are made regarding the pros and cons of the studied operating conditions.

We report recent enhancements of the online atomic database at the Ohio State University, NORAD-Atomic-Data, that provides various parameters for radiative and collisional atomic processes dominant in astrophysical plasma. NORAD stands for Nahar Osu RADiative. The database belongs to the data sources, especially for the latest works, of the international collaborations of the Opacity Project and the Iron Project. The contents of the database are calculated values for energies, oscillator strengths, radiative decay rates, lifetimes, cross sections for photoionization, electron-ion recombination cross sections and recombination rate coefficients. We have recently expanded NORAD-Atomic-Data with several enhancements over those reported earlier. They are as follows. i) We continue to add energy levels, transition parameters, cross sections for atoms and ions with their publications. ii) Recently added radiative atomic data contains significant amount of transition data for photo-absorption spectral features corresponding to x-ray resonance fluorescence effect, prominent wavelength regions of bio-signature elements, such as phosphorus ions, and emission bumps of heavy elements, such as of lanthanides, that may be created in a kilonova event. We are including iii) collisional data for electron-impact-excitation, iv) experimental data for energies and oscillator strengths for line formation, v) experimental cross sections for photoionization that can be applied for benchmarking and other applications, and vi) introduction of a web-based interactive feature to calculate spectral line ratios at various plasma temperature and density diagnostics, starting with our recently published data for P II. We presented summary description of theoretical backgrounds for the computed data in the earlier paper. With introduction of experimental results, we present summary description of measurement of high resolution photoionization cross sections at Advanced Light Source of LBNL synchrotron set-up and briefly discuss other set-ups. These additions should make NORAD-Atomic-Data more versatile for various applications. For brevity, we provide information on the extensions and avoid repetition of data description of the original paper.

Abstract: Placenta accreta spectrum (PAS) is a severe complication of pregnancy associated with excessive invasion of cytotrophoblast cells at the sites of the endometrial-myometrial interface and the myometrium itself in cases of adherent (creta) and invasive (increta and percreta) forms, respectively. Despite advancements in ultrasound protocols and found associations of alpha-fetoprotein, PAPP-A, hCG, PLGF, sFlt-1, IL-8, and IL-33 peripheral blood levels with PAS, the condition remains undiagnosed before delivery because of the lacking clear evaluation criteria for each of the three grades of PAS. This leads to a high risk of massive blood loss, maternal hysterectomy, and preterm birth. While using deep sequencing, miRNA signatures of placental tissue, myometrium, and blood plasma from women with PAS in the third trimester of pregnancy, as well as miRNA profile in exosomes from the blood serum of women in the first trimester with physiologically progressing pregnancy, complicated by PAS or preeclampsia, were obtained. Two logistic regression models were constructed, both featuring statistically significant parameters related to the levels of miR-26a-5p, miR-17-5p, and miR-101-3p quantified by real-time PCR in native blood serum. These models demonstrated 100% sensitivity in detecting PAS during the first pregnancy screening. These miRNAs were identified as specific markers for PAS, showing significant differences in their blood serum levels during the first trimester in the PAS group compared to those in physiological pregnancies, early- or late-onset preeclampsia groups. Furthermore, these miRNAs exhibited differential expression in the PAS placenta and/or myometrium in the third trimester and, according to literature data, control angiogenesis. Significant correlations were found between extracellular hsa-miR-101-3p and nuchal translucency thickness, hsa-miR-17-5p and uterine artery pulsatility index, and hsa-miR-26a-5p and hsa-miR-17-5p with PLGF. The developed test system for early non-invasive PAS diagnosis based on the blood serum level of extracellular miR-26a-5p, miR-17-5p, and miR-101-3p can serve as an auxiliary method for 1st trimester screening pregnant women, subject to validation on independent test samples.

Training has a significative effect on physiology of blood coagulation both in humans and in horses. Several hemostatic changes have been reported after exercise in the horse but data available are inconclusive. The aim of this study was to investigate the platelet activation and primary platelet-related hemostasis modifications in young untrained Thoroughbred racehorses in the first 4-month timeframe incremental training period in order to improve knowledge on this topic. Twenty-nine clinically healthy, untrained, 2-year-old Thoroughbred racehorses. Never trained Thoroughbreds were followed during their incremental 4-month sprint exercise schedule. Blood collection was performed once a month (T-30, T0, T30, T60, and T90). Platelet aggregation was measured by light transmission aggregometer in response to various agonists: adenosine diphosphate (ADP), collagen and calcium ionophore A23187. Platelet function was evaluated using the Platelet Function Analyzer (PFA-100®) using collagen/ADP and collagen/adrenaline cartridges. Nitrite-nitrate (NOx) plasma concentrations were measured by a colorimetric assay to assess in vivo nitric oxide bioavailability. Platelet activation was investigated also through gene expression analyses (selectin P-SELP, ectonucleotidase CD39-ENTPD1, prostaglandin I2 synthase-PTGIS, endothelial nitric oxide synthase 3-NOS3). Differences among the time points were analyzed and mean±SEM were calculated. Significant modifications were identified compared with T-30 with increase of platelet aggregation (collagen:32.6±4.8 vs 21.6±4.9%; ADP: 35.5±2.0 vs 24.5±3.1%; A23187: 30±4.7 vs 23.8±4%) and a shorter closure time of C-ADP cartridges (75.6±4.4 vs 87.7±3.4 sec) that tended to return to baseline value at T90. NOx concentrations in plasma significantly increased after 30 days of training program compared with baseline. The first long-term training period induce platelet hyperactivity already after 30 days in untrained Thoroughbreds. Regular physical training blunts the negative effects of acute efforts on platelets activation.

The short-lived positron-emitter carbon-11 (t1/2 = 20.4 min; b+, 99.8%) is prominent for labeling tracers for use in biomedical research with positron emission tomography (PET). Carbon-11 is produced for this purpose with a cyclotron, nowadays almost exclusively by the 14N(p,a)11C nuclear reaction, either on nitrogen containing a low concentration of oxygen (0.1–0.5%) or hydrogen (~ 5%) to produce [11C]carbon dioxide or [11C]methane, respectively. These primary radioactive products can be produced in high yields and with high molar activities. However, only [11C]carbon dioxide has some utility for directly labeling PET tracers. Primary products are required to be converted rapidly and efficiently into secondary labeling synthons to provide versatile radiochemistry for labeling diverse tracer chemotypes at molecular positions of choice. This review surveys known gas phase transformations of carbon-11 and summarizes the important roles that many of these transformations now play for producing a broad range of labeling synthons in carbon-11 chemistry.

The research on the impact of excavation of underpass tunnels has already had certain results, but there is a lack of research cases of double-line highway tunnels with oblique angles underpass the existing railway tunnels, especially the method of determining the area of the impact of the dynamic and static loads of the new tunnels and existing trains to be enriched by considering them at the same time. In this paper, based on the tunnel project of the new double-line Shiqian Highway Tunnel with oblique angles underpass the Hurong Railway in Wanshoushan. By constructing a three-dimensional finite element model and simulating the application of static tunnel excavation load, dynamic blasting load and dynamic train operation load of the existing tunnel, the overall displacement of the existing tunnel and the settlement value of the bottom plate of the track surface by the static tunnel excavation load were analyzed. Then, the stresses, vibration speeds and displacements of the tunnel due to the dynamic blasting loads and the dynamic train operation loads were obtained. The results show that: the area of influence of the static loads of the new tunnel excavation on the existing tunnel is divided into three types of perturbations presenting strong, weak and slight; the area affected by the blasting dynamic load of new tunnel excavation is a circular domain with the datum point in the tunnel section as the center; the area affected by the dynamic load of train operation in the existing tunnel is an ellipse with the center of the track surface of the existing tunnel as the datum; there is an anomalous shape in the area affected by the blasting dynamic load of new tunnel excavation and the area affected by the dynamic load of train operation in the existing tunnel.

Control of canine infections with Leishmania infantum (L. infantum), a major zoonotic disease in Brazil and southern Europe is becoming increasingly important due to their close proximity to humans, the increasing import of dogs from endemic regions and impact of climate change on vector spreading. Simple, rapid and reliable diagnostic tests are therefore needed to detect infected dogs. Here, we re-evaluated different serological methods for the diagnosis of canine leishmaniosis (CanL) in Croatia and Brazil. The diagnostic performance of the indirect fluorescent antibody test (IFAT) and the VetLine® Leishmania ELISA was compared with three rKLi8.3 based diagnostic test systems, the rKLi8.3 ELISA, the INgezim® Leishma CROM lateral flow test (LFT) and the VetBlot® Leishmania LineBlot. CanL symptomatic dogs were efficiently diagnosed by all tests, except the VetLine® Leishmania ELISA, which is based on whole Leishmania antigens. The advantage of rKLi8.3 was also observed in oligo-and asymptomatic dogs from Brazil and Croatia, although with reduced diagnostic efficiency compared to symptomatic dogs. Similar to IFAT and rKLi8.3 ELISA, the LFT did not cross-react with other common canine pathogens, showed a very high specificity for healthy dogs from endemic regions of both countries and did not react with healthy, vaccinated dogs in Brazil. In conclusion, sero-diagnostic tests based on the rKLi8.3 antigens are superior to whole parasite antigens and the LFT has the advantage of providing a laboratory independent, rapid and specific diagnosis of CanL.

Flowering in cassava is crucial for generation of botanical seed for breeding. However, most farmer preferred genotypes are poor at flowering, exhibit great disparity in time and amount of flowering or never flower. To elucidate the genetic basis of such a flowering behaviour, 293 diverse cassava accessions were evaluated for flowering traits under two locations and seasons in Uganda. Genotyping by the Diversity Array Technology Pty Ltd. (DArTseq) platform identified 24,040 single-nucleotide polymorphisms (SNPs) distributed on the 18 cassava chromosomes. Population structure analysis using principal components (PC) and kinships showed clustering, the first five PCs accounted for 49.2% of the observed genetic variation. Linkage disequilibrium (LD) estimation was averagely 0.32 at a distance of ~2850kb (kilo base pairs). Polymorphism information content (PIC) and minor allele frequency (MAF) were 0.25 and 0.23, respectively. Genome-wide association study (GWAS) analysis uncovered 53 significant marker-trait associations (MTA) with flowering traits involving 27 loci. Two loci, SNPs S5_29309724 and S15_11747301 were associated with all the flowering traits. Using five of the 27 SNPs with Phenotype_Variance_Explained (PVE) ≥ 5%, 37 candidate genes were identified in the peak SNP sites located within 50kb upstream or downstream, most were associated with branching traits. Eight of the genes, orthologous to Arabidopsis and other plant species, had known functional annotations related to flowering, e.g. eukaryotic translation initiation factor and myb family transcription factor. This study identified genomic regions associated with flowering in cassava, the identified SNPs could be useful in marker-assisted selection to overcome hybridization challenges like unsynchronized flowering, and candidate gene validation.

With the global warming and the frequent occurrences of harsh environments, mooring line failures are frequent. Response analysis of the platform structure and its residual mooring system under multiple mooring line failures is needed. Therefore, it is necessary to investigate the change law of platform motion response after mooring line failure to find out the reasons for the change. Studies for different failure combinations of mooring lines show that the variation of the steady-state equilibrium position of the platform is closely related to the stiffness, with a clear functional. The duration and amplitude of the transient response are mainly influenced by the Morison drag force. And it was found that the suspended mooring line reduced the motion responses. It is also found that the mooring line failure increased the effective tension and suspension length of the riser. Based on the improved Dezert-Smarandache theory (DSmT), it is calculated that mooring line failure has little effect on the failure probability in different zones of the riser.

Background: Injury is an important cause of mortality and morbidity.(1). FA is the immediate assistance provided to a suddenly injured or sick person until professional help arrives or that person has recovered.(2), could be a potential factor differentiating between life and death in RTA . Many lives would be saved if proper first aid is provided early. (3) In the middle east, there are limited studies that explore knowledge and practices towards first aid needed during RTA. Objective: The main aim of this study is to investigate the knowledge and attitude towards first aid among drivers in Sharjah. Methodology: A cross-sectional study was conducted through a self-administered questionnaire written in Arabic and English languages. Participants were 18 years or older holding a driving license in the city of Sharjah. Paramedics and certified participants with a certification from authorized organizations were excluded . A non-proportional convenient sampling method was used. A total of 343 participants have completed the questionnaires. Data was entered and analysed using SPSS. Results: Majority of the study participants were less than 40 years old and (56.76%) were males. Most participants(94.2%) indicated that they know the term ‘First Aid’. However, (49.73%) of the participants knew the ambulance number and (52.43%) of the participants indicated that the victim should be moved to the hospital without the ambulance. With regards to attitude, 34.86% were not willing to provide first aid in the case of RTA. The main reason was lack of knowledge followed by fear of legal consequences. Most participants (83,78%) were willing to participate in first aid classes to improve their knowledge and attitude. Conclusion: Most participants are aware of the basic term of first aid; however, they are not willing to provide first aid in cases of RTA due to lack of knowledge and fear of legal consequences. Based on these findings we recommend providing first aid classes for new drivers and to obtain certification. References: 1 and 3. Midani, O., Tillawi, T., Saqer, A., Hammami, M., Taifour, H. and Mohammad, H., 2020. Knowledge And Attitude Toward First Aid: A Cross-Sectional Study In The United Arab Emirates. 2.Van de Velde S, Heselmans A, Roex A, Vandekerckhove P, Ramaekers D, Aertgeerts B. Effectiveness of nonresuscitative first aid training in laypersons:A systematic review. Ann Emerg Med 2009;54:447-57, 457e1-5.

This study explores the dynamics of liquid holdup in a lab-scale co-current two-phase upflow moving packed bed reactor, specifically examining how superficial gas velocity influences the line average external liquid holdup at a fixed superficial liquid velocity. Utilizing Gamma-ray Densitometry (GRD) for precise measurements, this research extends to determining line average internal porosity within catalyst particles and the overall external bed porosity. Conducted with an air-water system within a bed packed with 3 mm extrudate porous particles, the study presents a novel methodology to calculate liquid holdup, grounded in Beer–Lambert's law. Findings reveal a decrease in liquid holdup corresponding with increased superficial gas velocity across axial and radial locations, with a notable transition from bubbly to pulse flow regime at a critical velocity of 3.8 cm/sec. Additionally, the lower sections of the packed bed exhibited higher external liquid holdup compared to the middle sections at varied gas velocities. The liquid holdup distribution appeared uniform at lower flow rates, whereas higher flow rates favored the middle sections.

In the face of climate change, bringing more useful alleles and genes from wild relatives of wheat is crucial to develop climate-resilience varieties. We used two populations of backcrossed recombinant inbred lines (BIL1 and BIL2), developed using two intra-specifically diverse Aegilops tauschii accessions from lineage 1 and lineage 2, respectively, and backcrossing to common wheat cultivar ‘Norin 61’. The study aimed to identify quantitative trait loci (QTL) associated with heat stress (HS) tolerance. The two BILs were evaluated under heat stress environments in Sudan for phenology, plant height (PH), grain yield (GY), biomass (BIO), harvest index (HI), and thousand kernel weight (TKW). Grain yield was significantly correlated with BIO and TKW under HS; therefore, stress tolerance index (STI) was calculated for these traits as well as for GY. A total of 16 heat tolerant lines were identified based on GY and STI-GY. The QTL analysis performed using inclusive composite interval mapping identified a total of 40 QTLs in BIL1 and 153 QTLs in BIL2 across all environments. We detected 39 QTLs associated with GY-STI, BIO-STI, and TKW-STI in both populations (14 in BIL1 and 25 in BIL2). The QTL associated with STI were detected on chromosomes 1A, 3A, 5A, 2B, 4B, and all the D-subgenomes. We found that QTL detected only under HS for GY on chromosome 5A, TKW on 3B and 5B, PH on 3B and 4B, and grain filling duration on 2B. The higher number of QTLs identified in BIL2 for heat stress tolerance suggests the importance of assessing the effects of intraspecific variation of Ae. tauschii in wheat breeding as it could modulate the heat stress responses/adaptation. Our study provides useful genetic resources for uncovering heat-tolerant QTLs for wheat improvement for heat stress environments.

Campylobacter jejuni is a zoonotic bacterium, causing intestinal infection in humans. One characteristic feature of the pathogenicity process is the ability of this bacterium invading the epithelial cells. Several factors have been identified to contribute to this process and some recent analyses revealed changes in the bacterium cell on molecular level. However, our knowledge is still limited about responses of the host that accompany the bacterial internalisation and survival process. This study focused on molecular events on transcriptomic level detected between the 1st and the 3rd hour of internalisation in INT407 epithelial cells. From the 41.769 human genes tested, altogether 19,060 genes and 22,734 pseudogenes and introns were shown by whole transcriptome analysis to be affected in different extent. Most affected functions regulate transcription (28%), signal transduction (21%), apoptosis (15%), immune responses (9%), transmembrane transport (6%), cell-cell signaling (3%), cell-cell adhesions (3%) and carbohydrate metabolism (3%) and to a lesser extent other functions. Our results provide insight into a scenario where, the invaded cell focuses on survival, but, at the same time, flashing the possibility of pushing the process toward the death of the invaded and metabolically disrupted cell.

Undergraduate learning is a multifaceted concept that many researchers have investigated to promote student engagement, academic performance, etc. Exploring factors promoting learning among undergraduates in FYW programs, which are required for undergraduates might potentially contribute to sustainable, cross-disciplinary undergraduate education. This study used the 10-year longitudinal grade and survey data at San José State University (SJSU) and the data was collected from Academic Years (AYs) 2015 to 2020, and five student surveys constituted the sample size of 18,101 students. In 2016, SJSU changed the remedial writing course to college writing courses. Since then, students need to complete an online module course before placing themselves into a one-semester or two-semester writing course. The previous study showed that students with higher writing comfort and confidence tend to place themselves into a semester-long class. Regression analysis was applied to examine the relationships among factors promoting learning among those students. University admitted students from various diversity and backgrounds, the results of this study suggested that what students chose and persisted in were more important in advancing their academic success rather than prior learning experience or psychological factors before the class.

In the field of computational fluid dynamics (CFD) for rotorcraft, two significant challenges are resolving the complex vortex structures in rotor wakes, and representing the moving rotor blades in the ambient airflow. This study addresses the first challenge by using a third-order unstructured finite volume solver, which, compared to its second-order counterpart, has substantially lower dissipation. Consequently, even relatively coarse meshes are capable of resolving small vortices. With this background flow field solver, the second challenge is addressed by modeling each rotor as an Actuator Disk Model (ADM), or describing individual rotor blades as actuator lines, designated as the Actuator Line Model (ALM). Both of these models are equipped with an improved correction for aerodynamic losses at blade tips, which is thoroughly presented in the methodology section. The numerical experiments section centers on analyzing errors linked to various sampling approaches. Additionally, the article discusses comparisons between vortex theory and ALM, specifically regarding calculations for fixed-wing aircraft. Furthermore, high-order precision and parallel efficiency are exemplified in scenarios encompassing rotors engaged in both hovering and forward flight rotors. The results in this paper demonstrate that the combination of the ALM/ADM with the improved tip loss correction and the third-order finite volume solver presents a new way of developing efficient tools for the aerodynamic analysis of helicopter rotors.

Laser scanning 3D imaging technology, because it can get accurate three-dimensional surface data, has been widely used in the search for wrecks and rescue operations, underwater resource development, and other fields. At present, the conventional underwater rotating laser scanning imaging system maintains a relatively fixed light window. However, in low-light situations underwater, the rotation of the scanning device causes some degree of water fluctuation, which warps the light strip data that the system sensor receives about the object's surface. To solve the problem, this research studies an underwater 3D scanning and imaging system that makes use of a fixed-light window and a spinning laser (FWLS). A refraction error compensation algorithm is investigated that is based on the fundamentals of linear laser scanning imaging and the dynamic refraction mathematical model is established by the motion of the imaging device. During the imaging process, the incident angle between the laser and the light window varies due to the scanning mode of the system. The experimental results show that the reconstruction radius error is reduced by 60% (from 2.5 mm to about 1 mm) when the measurement data for a standard sphere with a radius of 20 mm are compensated. Moreover, the compensated point cloud data exhibits a higher degree of correspondence with the model of the standard spherical point cloud. This study has a specific reference value for the refractive error analysis of an underwater laser scanning imaging system, and it provides certain research ideas for the subsequent refractive error analysis of various scanning imaging modalities.

The commonly quoted bistable Higgs potential is not a proper description of the Higgs field because, among other technical reasons, one of its stable states acquires a negative expectation value in vacuum. We rely on formal catastrophe theory to derive the form of the Higgs potential that admits only one positive mean value in vacuum. No symmetry is broken during the ensuing phase transition that assigns mass to the Higgs field; only gauge redundancy is “broken” by the appearance of phase in the massive state, but this redundancy is not a true symmetry of the massless field. Furthermore, a secondary, certainly amusing conclusion is that, in its high-energy state, the field oscillates about its potential minimum between positive and negative masses; but it is doubtful that such evanescent states can survive below the critical temperature of 159.5 GeV, where the known particles were actually created.

The classical joint economic lot-sizing (JELS) policy in a single-vendor single-buyer system generates an equal production quantity in all cycles, where the input parameters remain static indefinitely. In this paper, a new two-echelon supply chain inventory model is developed involving a hybrid production system that simultaneously focuses on green and regular production methods with optimal allocation fraction of green and regular productions. Unlike the classical mathematical formulation, each cycle is independent from the previous one, and consequently, the input parameters can be adjusted to be responsive to the dynamic nature of demand rate and price fluctuation. A rigorous heuristic approach is used to derive a global optimal solution for a joint hybrid production system. The model accounts for carbon emissions from production and storage activities related to green and regular produced items along with transportation activity under a multi-level emission-taxing scheme. The results emphasize the significant impact of green production on emissions. That is, the higher the allocation fraction of green production the lower the total amount of emissions generated by the system, i.e., the system becoming more sustainable. Adopting a hybrid production method not only decreases the greenhouse gas (GHG) emissions dramatically, but also reduces the per unit time total cost when compared with regular production. One of the main findings is that the total system cost generated by the base closed-form formula of the proposed model is considerably lower than that of the existing literature i.e., 33.59% (16.13%) lower in the first cycle (subsequent cycles) when the regular production method is assumed. Moreover, the optimal production rate generated by the proposed model is the one that minimizes the emissions production function. Illustrative examples and special cases that reflect different realistic situations are compared to outline managerial insights.

Our previous studies showed that in patients with brain diseases neurotrophic factors in lacrimal fluid (LF) may change more prominently than in blood serum (BS). Since glial cell line-derived neurotrophic factor (GDNF) is involved in control of neuronal networks in epileptic brain, we aimed to assess GDNF levels in LF and BS as well as BDNF, hypothalamic-pituitary-adrenocortical and inflammation indices in BS of patients with focal epilepsy (PWFE), epilepsy and comorbid depression (PWFE+MDD) compared with major depressive disorder (PWMDD) and healthy controls (HC). GDNF levels in BS were similar in patients and HC and higher in PWFE taking valproates. GDNF levels in LF were significantly lower in all patient groups compared to controls, and independent of drugs used. LF and BS GDNF concentrations positively correlated in HC, but not patient groups. BDNF level was lower in BS of patients compared with HC and higher in PWFE+MDD taking valproates. Logistic regression models demonstrated that GDNF decrease in LF may be an important predictor of focal epilepsy. Probability of focal epilepsy can be evaluated using GDNF in LF and BDNF in BS; MDD - GDNF in LF, cortisol and TNF-α in BS; epilepsy with MDD - GDNF in LF, TNF-α and BDNF in BS.

There are no theorems (proven theories) in the biological sciences. We propose that the 3 31 nt minihelix tRNA evolution theorem be universally accepted as one. The 3 31 nt minihelix theorem completely describes evolution of type I and type II tRNAs from ordered precursors (RNA repeats and inverted repeats). Despite diversification of tRNAome sequences, statistical tests overwhelmingly support the theorem. Furthermore, the theorem relates the dominant pathway for the origin of life on Earth, specifically, how tRNAomes and the genetic code may have coevolved. Alternate models for tRNA evolution (i.e., 2 minihelix, convergent and accretion models) are falsified. In the context of the pre-life world, tRNA was a molecule that via mutation could modify anticodon sequences and teach itself to code. We relate the clearest history to date of the chemical evolution of life on Earth. From analysis of tRNA evolution, ribozyme-mediated RNA ligation was a primary driving force in evolution of complexity during the pre-life to life transition on Earth.

Influence lines are indispensable tools for visualizing and analyzing the dynamic variations in force factors induced by external loads within structural systems. Among these methods, the energetic approach stands as a widely employed technique, rooted in the fundamental principle of work done by changing forces. It enables engineers to transform intricate structural analysis problems into manageable ones by exploring the first derivatives of the radius vector, which represent infinitesimal velocity or displacement. This methodology seamlessly interweaves concepts such as carrier motion, relative motion, and the construction of mechanisms, bringing fresh perspectives to the analysis of influence lines. In this article, we explore the nuances of these novel methods within the domain of mechanism theory. Through comprehensive elaboration and analysis, we elucidate the underlying principles and practical applications of Jacobian contours. Crucially, we introduce a straightforward, rapid, and programmable approach, promising to revolutionize influence line determination in structural engineering. This method bridges the gap between theory and practice, offering the potential to elevate the accuracy, efficiency, and adaptability of influence line analysis. As such, it represents a significant advancement in the field of structural and applied mechanics, with broad-reaching implications for engineering practice.

Exposure to quasi-electrostatic field induced currents is a hazard of live-line transmission work. These steady-state induced currents are typically less than 1 mA, and their sensory effects range from imperceptible to painful depending on the person and conditions such as contact area and duration. Permanent injury from these currents is unlikely but they can distract workers, increasing the risk of injury from falls or other dangers. Identifying contact current severity and training workers can help reduce risk of accidents. Measuring induced currents along a climbing route is time consuming and simulation is challenging because of geometric complexity of the worker, transmission structure, conductor bundles, and electric fields in the climbing space. This research explores calculation of worker contact current using a recently developed adaptation of the charge simulation method. The method uses Fourier principles to improve computational efficiency when explicitly modeling all bundle subconductors. The research also examines reasonable simplifications for modeling lattice structures and human geometry. Calculated results compare well to measured currents for a worker climbing a 400 kV lattice structure. This indicates the method is a practical option for calculating the severity of steady-state contact currents. A simple calculation is suggested for estimating these currents.

Influenza virus can cause several complications during pregnancy. Therefore, we aimed to inves-tigate the effects of influenza on the development of congenital abnormalities (CAs) by analyzing the database of the Hungarian Case-Control Surveillance of Congenital Abnormalities (HCCS-CA). In our multicenter, case-control, population-based study, we processed clinician-reported outcomes and diagnoses collected in the HCCSCA. The case group included newborns with dif-ferent non-chromosomal birth defects, while controls were newborns without CAs. Maternal in-fluenza, as a risk factor for CAs, was analyzed by using a logistic regression model and odds ra-tios with 95% confidence intervals (CIs). Our results showed that maternal influenza in the first trimester was associated with increased odds of developing non-chromosomal CAs (OR: 1.41, CI: 1.28–1.55). There were increased odds of neural tube defects (OR: 2.22, CI: 1.78–2.76), orofacial clefts (OR: 2.28, CI: 1.87–2.78) and congenital heart defects (OR: 1.28, CI: 1.10–1.49) after influenza infection. In all cases, we found a protective effect of folic acid supplementation in the first tri-mester. The odds of non-chromosomal birth defects are higher after maternal influenza in the first -trimester. Folic acid or pregnancy vitamin supplementation and antipyretic therapy may reduce the effect of maternal influenza during the first trimester.

Simple weir irrigation was recently introduced in rural areas of Zambia. This irrigation technique is based on gravity diversion of the river flow using simple weirs. This study was conducted between November 2022 to January 2023 in 3 northern region provinces (Luapula, Copperbelt, and North-western) of Zambia to perform a diagnostic assessment on simple weirs during the dry and the wet seasons. In this study, 15 single-line simple weirs were selected. The objective of the study is to assess the physical status, identify problems and extent, and estimate water diversion potential by each single-line weir. The findings of this study showed that 67% of weirs were in excellent status (recently maintained and repaired), and 26% of the weirs were partially damaged (leakages, decayed thatch grass). The study revealed that single-line weirs were able to raise a flood height of 0.1m at low flow and 0.5m at medium flow. It was found that single-line weirs in excellent condition diverted more than 90% of the river flow while poorly maintained weirs diverted below 45% of the river discharge. Based on the findings, Single-line weirs have the potential to assist small-scale farmers in accessing river water for irrigation purposes through diversion.

Sustainable Forest Management (SFM) can fully use forest resources and improve the economic, environmental and social sustainability of forest areas. Forestry enterprises play a crucial role in the implementation of SFM. To better play the role of forestry enterprises in implementing SFM, it is necessary to establish a comprehensive and reasonable performance evaluation model for SFM in forestry enterprises. However, the previous literature pays little attention to this research question. Taking the Triple Bottom Line (TBL) as a theoretical framework and the Montreal Process Criteria and Indicators (MP C&I) as a basis, this paper constructs an indicator system to evaluate the performance of SFM of forest enterprises from economic, social and environmental aspects. This paper applies the integrated MCDM method, i.e. the BWM method and the VIKOR method, to construct the methodological system for SFM performance evaluation of forestry enterprises. The effectiveness of this SFM performance evaluation model is then demonstrated through its application to a case study of forestry enterprises in China. Through the application of the model, this paper evaluates the enterprise's SFM performance over the five-year period 2017-2021 and proposes appropriate policy recommendations and improvements.

The electronic, optical, and magnetic properties of Nd-doped ZnO systems were calculated using the DFT/GGA+U method. According to the results, the Nd dopant causes lattice parameter expansion, negative formation energy, and bandgap narrowing, resulting in the formation of an n-type degenerate semiconductor. Overlapping of the generated impurity and Fermi levels results in a significant trap effect that prevents electron-hole recombination. The absorption spectrum demonstrates a redshift in the visible region and improved intensity, leading to enhanced photocatalytic performance. The Nd-doped ZnO system displays ferromagnetic, with FM coupling due to strong spd-f hybridization through magnetic exchange interaction between the Nd-4f state and O-2p, Zn-4s, and Zn-3p states. These findings imply that Nd-doped ZnO may be a promising material for DMS spintronic devices.

: This study aims at examining how B Corporations advance Sustainable Development Goals (SDGs) in their practices by analyzing the socioenvironmental problems they address and the solutions they provide to those problems. All Argentinian B corporations, certified by early 2023 (135 companies), were investigated using a mixed approach, combining social network analysis with textual data analysis. The results showed that the environmental practices are primarily linked to waste, water, energy and chemical management, as well as product innovation. In turn, the social practices address the training, education, and well-being of employees and other stakeholders, diversity, equity and inclusion management, and the creation of an inclusive and fair environment, integrating local communities. Thus, in the flow of their sustainability practices, Argentinian B Corporations contribute to SDGs 8, 12, 13, 9, 6, 7, 5, 10, 11, 4, and 17, in line with the SDGs declared by these companies. Our findings contribute to the theoretical knowledge of the B Corp movement and have practical implications by providing inputs to improve the management of B Corporations and to guide public policies encouraging these companies to advance sustainable development dimensions lacking attention.

The goal of this paper is to fabricate innovative diaphragm headphones using graphene oxide paper (GOP) and GOP/epoxy nanocomposites (GOPC). Initially, graphene oxide suspension is fabricated, and the vacuum filtration method is adopted to make GOP. Then vacuum bag molding is used to fabricate GOPC from GOP. Hot pressing and associated molds are adopted to fabricate line-indented (GOPC-L) or curve-indented patterns (GOPC-C) on the GOPC. The performance of one kind of GOP and three kinds of GOPC diaphragm headphones is analyzed based on their sound pressure level (SPL) curves achieved by the Soundcheck measurement system. There are four important processing parameters that will influence the performance of the diaphragm, including material type GOP versus GOPC, indented pattern type, sonication time on suspension, and graphene weight fraction in suspension. Compliances of various diaphragms are measured by the Klippel LPM laser measurement system. The results indicate that effects of sonication time and graphene weight fraction on SPL of GOP and GOPC headphones are in reverse, and this is associated with their difference on compliance (modulus), mass, damping ratio, and microstructure uniformity. Either GOPC-L or GOPC-C seems to improve the microstructure of the GOPC, and leads to better SPL performance. The correlation between the previous four factors and SPLs of four kinds of diaphragm headphones is proposed by using scanning electron microscope (SEM) to examine the microstructure of these diaphragms.

By making periodic thru-holes in a suspended film, the phonon system can be modified. Motivated by the BCS theory, the technique -- so-called phonon engineering -- was applied to a metallic niobium sheet. It was found that its electrical resistance dropped to zero at 175 K, and the zero-resistance state persisted up to 290 K in the subsequent warming process. Despite the initial motivation, neither these high transition temperatures nor the phase transition with thermal hysteresis can be accounted for by the BCS theory. Therefore, we abandon the BCS theory. Instead, it turns out that the metallic holey sheet is partly oxidized to form a niobium-oxygen square lattice, which has points of resemblance to a copper-oxygen plane, the fundamental component of cuprate high-T_c superconductors. Therefore, the pairing mechanism underlying this study should be related to that of cuprate high-T_c superconductors, which we may not yet understand. In addition to the electrical results of zero resistance, the holey sheet exhibited a decrease in magnetization upon cooling, i.e., the Meissner effect. Moreover, the remnant magnetization was clearly detected at 300 K, which can only be attributed to persistent currents flowing in a superconducting sample. Thus, this study meets the established criteria for a conclusive demonstration of true superconductivity. Finally, the superconducting transition with the unambiguous thermal hysteresis is discussed. According to Halperin, Lubensky, and Ma, or HLM for short, any superconducting transition must always be first order with thermal hysteresis because of the intrinsic fluctuating magnetic field. The HLM theory is very compatible with the highly oriented system harboring two-dimensional superconductivity.

In the Neighborhood Area Network (NAN), the Advanced Metering Infrastructure (AMI) enables a bidirectional connection between the Smart Meter (SM) and the Data Concentrator (DC). Sensors, such as smart meter node or Radio Frequency transceiver, play a crucial role in collecting and transmitting data from meters to central unit for advanced monitoring, management, and analysis of energy consumption. Wired and wireless communication technologies can be used to implement the AMI-NAN. This paper delves into a novel approach for optimizing the choice of communication medium, Radio Frequency (RF) or Power-Line Communication (PLC), between the SM and DC in the context of AMI-NAN. The authors methodically select the specific technologies, RF and NB-PLC (Narrow Band Power-Line Communication), and meticulously characterize their attributes. Then, a comparative analysis spanning rural, urban, and industrial settings is conducted to evaluate the proposed method. The overall reliability performance of the AMI-NAN system requires a Packet Error Rate (PER) lower than 10%. To this end, a comprehensive methodology is introduced to assess and enhance the reliability of NB-PLC and RF for AMI-NAN applications. Simulation results demonstrate that wireless communication is the optimal choice for the rural scenario, especially for Signal to Noise Ratio (SNR) lower than 25 dB. However, in urban environments characterized by higher SNR values and moderately dense networks, NB-PLC gains prominence. In denser networks, it outperforms wireless communication, exhibiting a remarkable 10 dB gain for a bit error rate (BER) of 10-3. Moreover, in industrial zones characterized by intricate network topologies and non-linear loads, the powerline channel emerges as the optimal choice for data transmission, affording a gain surpassing 20 dB.

To supply stable and high-quality power according to the advancement of industrial growth, electric power companies have performed maintenance of power facilities using various meth-ods. In the case of domestic power distribution facilities, there are limitations in performing di-agnostic management on all facilities owing to the large number of facilities; therefore, old fa-cilities are managed by the health index assessment method. The health index assessment com-prises only facility operation data and external environmental data and is managed only for four types of distribution facilities, including overhead/underground transformers and switchgear. In the case of extra high–voltage overhead wires, there is no standard for old replacement, despite the large number of wires, such as transformers and switchgear, and the large ripple effect of power failure in the event of a power outage. Therefore, in this paper, a health index assessment methodology for extra-high voltage overhead cables was developed. In this paper, we devel-oped an economic health index assessment methodology that additionally considers risk cost, which is different from the existing health index assessment method that uses only operational data and external environmental data to determine facility performance evaluation and aging replacement criteria. Using the health index assessment methodology developed in this paper, it is possible to expect a reduction in facility operating costs and investment costs from the per-spective of electric power companies through the replacement of old extra-high voltage over-head cables. In addition, from the perspective of consumers, it is expected to increase power re-liability and reduce the ripple effect of failure by preferentially replacing equipment with a high probability of failure.

Zirconium dioxide (ZrO2) possesses numerous advantages such as high mechanical strength, low friction coefficient, excellent optical properties, and extended lifespan. Consequently, ZrO2 has a broad research foundation and practical significance in functional films and wear-resistant coatings. However, it suffers from brittleness and low ductility when used as a bio-coating material. In this study, a Ta/ZrO2 film was fabricated on Si (100) and titanium alloy substrates using a magnetron sputtering system, with tantalum (Ta) serving solely as a transition layer. Subsequently, Zr and Nb ions were implanted into the film at varying doses but with consistent energy levels. The analysis focused on the film's microstructure, mechanical properties, hydrophilicity, and corrosion resistance. The results demonstrated a significant improvement in the hydrophilicity and corrosion resistance of the ZrO2 film following the implantation of Zr and Nb ions. First-principles calculations based on density functional theory (DFT) principles indicated that, with increasing doping concentrations of Zr and Nb in the ZrO2 model, the stability of the model increased gradually, thereby enhancing its corrosion resistance.

The extraction of roof feature lines is an important foundation for realizing large-scale and batch 3D modeling. However, the current traditional point cloud segmentation algorithms do not have satisfactory results in extracting roof feature lines of Chinese traditional residential buildings. In this paper, taking Jingping Village in Western Hunan as an example, we propose a method that combines multiple algorithms based on slope segmentation of roof patches to extract feature lines. Firstly, VDVI and CSF algorithms are used to extract the building and roof point cloud based on the MVS point cloud. Secondly, according to roof features, village buildings are classified, and 3D roof point cloud is projected into 2D regular grid data. Finally, the roof slope is segmented via slope direction, and internal and external feature lines are obtained after refinement through Canny edge detection and Hough straight line detection. Results reveal that this method effectively extracts feature lines of low-building roofs in traditional villages, with slope-based roof surface segmentation accuracy surpassing 99.6%. This method significantly outperforms the RANSAC algorithm and region segmentation algorithm.

Neutral beam injection (NBI) is used for thermonuclear plasma heating, non-inductive current drive, rotation, operation scenario control, and for plasma diagnostics in nuclear fusion devices. NBI is the main source of fast particles in plasma which transmit energy to thermal plasma during their slow-down. Steady-state tokamak operation is only possible when the sub-thermal particles energy is absorbed and effectively confined in plasma volume. While NBI purposes and applications vary through different fusion systems, the engineering tasks performed during research and development (R&D) stage of neutral beamline design have much in common. The NBI studies, especially addressing long pulse and high-power operation typically include a beam transmission analysis and power loads distribution at the structural components of the beamline. Thermo-structural analysis is applied next to heat removal circuits design. ‘Beam Transmission’ (BTR) code is a dedicated tool, developed by a physicist and used by NBI physicists and engineers. BTR was created and 1^st applied during R&D phase of the world’s largest tokamak ITER. BTR code is intended for public usage and routinely applied for detailed simulations of neutral beam propagation through complex beamlines. BTR is flexible and intuitive in input, user-friendly and fully interactive. Thanks to visualization and high performance BTR looks and feels like a real NB flight simulator. Despite BTR ‘mature’ age, the code is still in evolution. Support is available to all new BTR users.

We address weighted composition operators ψCφ from α-Bloch spaces to Bers-type spaces of bounded holomorphic functions on Y, where Y is a generalized Hua domain of the first kind, and obtain some necessary and sufficient conditions for the boundedness and compactness of those operators.

The dependence on Unmanned Aerial Vehicles (UAVs) has dramatically increased in many sectors around the globe. UAVs are in high demand, and their technology is developing quickly due to their sophisticated ability to handle various issues. UAVs are capable of replacing labor-intensive tasks with conducive and safe regulation. Additional tools or sensors need to be added to the UAVs system to ensure the implementation of UAVs able to serve into industrial level. The paper aims to consolidate and present a thorough understanding of the various stages of image processing pipelines deployed in UAV applications, including image acquisition, preprocessing, feature extraction, object detection and tracking, and decision-making processes. Throughout this paper, several aspects were deliberate such as strengths, limitations, and performance metrics of existing approaches, this paper seeks to provide researchers, engineers, and practitioners with valuable insights into the challenges and opportunities of image processing systems for UAVs. Ultimately, the synthesis of this knowledge will contribute to enhancing the effective-ness, autonomy, and applicability of UAVs in diverse fields such as surveillance, agriculture, disaster management, and environmental monitoring.

Background: The popularity of climbing via ferratas (VF) in the European Alps has increased a lot. We have analysed the pattern of injuries from accidents, which have occurred on VF, and First Aid (FA) knowledge from the persons on such alpine routes. The aim was to create specific FA courses for those who climb VF. Material and Methods: Incidences and FA knowledge of the alpinists were investigated by a questionnaire. Data included details of the individual’s alpine experience, accidents or any kind of medical emergency they have ever experienced. FA knowledge was evaluated by 18 multiple choice questions with 5 answers each. The questionnaire was based on those of previous studies but was slightly adopted for VF. For this data from rescue operations on VF were used. Finally every participant was asked to judge his FA knowledge by a Likert scale (1 to 5). Results: The collective consisted of 391 participants (28.4% women) with an average age of 41 years. A significant portion did no regular fitness training and in most cases the last FA training was years ago. Nobody had joined a specific FA course for climbers or mountaineers. The most common causes of emergencies were: weather conditions (19%), stumble (18.6%), falls (13.4%), and weariness and deficiency in concentration (13.4%). FA questions most often answered correctly were cardiac emergencies (49.6%), high altitude cerebral edema (HACE) (43.2%), snow blindness (40.9%), injuries of the head (37.1%) and hemorrhagic shock (35.3%). Those most often wrong were injuries of the back (1.0%), injuries of the thorax (2.8%), frostbite (9.0%), acute mountain sickness (AMS) (4.1%) and strategy of rescue (4.1%). VF climbers show significant less FA knowledge than mountaineers in the Western Alps and trekkers. Conclusions: Data support the need of a specific FA training for VF climbers. Their FA knowledge does not fit with the demands in the mountains while some other knowledge they have is negligible on VFs (e.g. HACE). This is in accordance with earlier studies in “classic” alpine mountaineering and in trekking.

In this paper, we consider a pursuit-evasion game of inertial players, where pursuer’s control is subject to integral constraint, and evader’s control is subject to geometric constraint. In the pursuit problem, the main tool is the strategy of parallel pursuit. Sufficient conditions are obtained for the solvability of pursuit-evasion problems. Also, the main lemma describing the monotonicity of an attainability domain of the evader is proved and an explicit analytical formula for this domain is given. As one of the important results of our paper, the Isaacs Life-line game is solved for a special case.

Colorectal cancer is the third most common disease and the second most common cause of death in the world. The drug for second-line treatment depends on the drugs used in first-line treatment and biomarker status. As biomarkers, the RAS gene, BRAF gene, and dMMR/MSI-H, TMB-H, and HER2 statuses have been established in clinical practice, and the corresponding molecularly targeted therapeutic agents are selected based on biomarker status. Given the frequency of biomarkers, it is assumed that when patients move on to second-line treatment, an angiogenesis inhibitor is selected in many cases. For second-line treatment, three angiogenesis inhibitors, bevacizumab (BEV), ramucirumab (RAM), and aflibercept (AFL), are available, and one of them is combined with cytotoxic agents. These three angiogenesis inhibitors are known to inhibit angiogenesis through different mechanisms of action. Although no useful biomarkers are established for selecting angiogenesis inhibitors, previous biomarker studies have suggested that angiogenesis-related factors such as VEGF-A and VEGF-D might be predictors of therapeutic efficacy of angiogenesis inhibitors. These biomarkers are measured as protein levels in plasma and are considered to be hopeful biomarkers. We consider that the rationale for selecting among these three angiogenesis inhibitors should be clarified to benefit patients.

The question of whether some neutrinos are tachyons remains unresolved although various evidence from cosmic ray and other data exists that the electron neutrino has an effective $m_\nu^2\approx -0.25 eV^2,$ which would require that one or more mass states is also tachyonic. In 2013 the $3+3$ model of the neutrino masses, which includes one tachyonic mass state, was proposed based on supernova SN 1987A neutrino data. Here we update evidence for tachyonic electron neutrinos and the $3+3$ model and discuss one test which could prove conclusive. The update of earlier evidence includes many new elements, including new data which makes the earlier cosmic ray evidence more robust, new results on cosmic ray composition, the ankle of the spectrum, leptonic cosmic ray data, and the statistical significance of finding the three large neutrino masses stipulated in the $3+3$ model. Barring a galactic supernova, which occur only around twice a century, a decisive test of the $3+3$ model could involve observing an extragalactic supernova neutrino burst, that is a cluster of neutrinos in a specific time window well beyond what chance would predict. Even though existing searches for such bursts have yielded only upper limits on the extragalactic supernova frequency within a certain distance, it is shown that the choice of a one-day window for possible neutrino clusters in time might be far more sensitive. A search using a one day time window could be done using existing data, and if a signal is found it would confirm the $3+3$ model. Of course, the absence of any day-long neutrino burst would not disprove the model, since it could mean only that the nearest supernova during the period when detectors were active was simply too far to be detected. Finally, apart from testing the 3 + 3 model, an alternative type of search is suggested using existing hadronic cosmic ray data (from the IceCube Collaboration) that might verify the tachyonic neutrino hypothesis.

Background: allergic diseases and, in particular food allergy (FA), have been identified as one of the major diseases in the world. The first 1000 days of life can be a “window of opportunity” or a “window of susceptibility” during which several factors can predispose children to FA development. Changes in gut microbiota composition, from pregnancy to infancy, could have a pivotal role in this regard: some bacterial genus such as Lactobacillus or Bifidobacterium seem to be protective from FA development, on the contrary Clostridium and Staphylococcus appear to be unprotective. Methods: we conducted a research through the most recent literature (2013-2023), using Pubmed and Scopus as databases. We included English original papers, clinical trials, metanalysis and reviews. Case reports, series and letters have been excluded. Results: during pregnancy, maternal diet can play a fundamental role in influencing gut microbiota composition of newborns. After birth, human milk can promote the development of protective microbial species by human milk oligosaccharides (HMOs), that play a prebiotic role. Also complementary feeding can modify gut microbiota composition. Conclusions: the first two years of life are a critical period where several factors, in genetic predisposed children, can increase the risk of FA development.

The cohesive energy of transition metal nanoparticles is crucial to understanding their stability and fundamental properties, which are essential for developing new technologies and applications in fields such as catalysis, electronics, energy storage, and biomedical engineering. In this study, we systematically investigate the size-dependent cohesive energies of all the 3d, 4d, and 5d transition-metal nanoparticles using first-principles density functional theory calculations. Our results show that the cohesive energies of nanoparticles decrease with decreasing size due to the increased surface-to-volume ratio and quantum confinement effects. We also find that the size-dependent cohesive energy trends are different for different transition metals, with some metals exhibiting stronger size effects than others. Our findings provide insights into the fundamental properties of transition-metal nanoparticles and have potential implications for their applications in various fields such as catalysis, electronics, and biomedical engineering.

To avoid the endless accumulation of QTL effects during pyramiding breeding, QTL epistasis plays a role of homeostasis. Four single-segment substitution lines with heading date QTLs were utilized to construct pyramiding materials with dual QTLs and triple QTLs, allowing for the estimation of QTL epistatic effects on heading date in rice. The epistatic components of dual QTL and triple QTL interactions were analyzed using data from three seasons of two years. All four QTLs can be considered as dominant loci, demonstrating superdominance. 75% of dual QTL interactions and 81.25% of triple QTL interactions obtained statistically significant results, reaffirming the prevalence of epistasis. Interactions of four QTLs with three positive effects and one negative effect generated 62.5% negative dual QTL epistatic effects and 57.7% positive triple QTL epistatic effects, forming the balance relationship “positive-negative-positive”. In fact, QTL effects were consistently partially neutralized by mixed QTL epistatic effects so as to control the infinite accumulation of QTL effects. QTL epistasis plays a role of homeostasis on heading date in rice. However, there were two exceptions. The directions of OsMADS50 and Hd3a-2 effects were consistently aligned with those of their mixed epistases, suggesting that the QTL or gene could be employed in pyramiding breeding with different objectives. This study elucidated the mechanism of epistatic interactions among four QTLs and provided valuable genetic resources for improving heading date in rice.

Homelessness continues to be a pervasive public health problem throughout Canada. Hospital Emergency Departments (EDs) and inpatient wards have become a source of temporary care and shelter for homeless patients. Upon leaving the hospital, homeless patients are not more equipped than before to find permanent housing. The Bridge Healing Program in Edmonton, Alberta has emerged as a novel approach to addressing homelessness by providing transitional housing for those relying on repeated visits to the ED. This paper describes the three essential components to the Bridge Healing model: partnership between the ED and a Housing First community organization; facility design based on The Eden Alternative™ principles, and; grassroots community funding. This paper in conjunction with the current pilot project of the Bridge Healing facilities serves as a proof of concept for the model and can inform transitional housing approaches in other communities.

The increasing enrollments in the English Departments at Palestinian universities highlight the need to understand the attitudes and expectations of students, as these factors can significantly impact their motivation and proficiency in learning English as a foreign language (EFL). This study aimed to explore the attitudes and expectations of Palestinian first-year English majors in relation to EFL learning. A total of 244 students participated in the study, completing a questionnaire and participating in interviews to provide a comprehensive understanding of their perspectives. The results revealed a high level of enthusiasm among the students towards EFL, as evidenced by their strong attitudes and exceptionally high expectations. Moreover, the study identified specific student characteristics, including gender and the required hours dedicated to English learning, as well as the experience of studying abroad, which served as predictive factors for their attitudes and expectations. The findings emphasize the importance of regularly assessing the attitudes and expectations of learners in English departments to effectively cater to their needs and attract more students. By understanding the motivating factors and aligning instructional strategies accordingly, English departments can create a more engaging and tailored learning environment for students pursuing English as a foreign language.

Overhead power transmission line icing (PTLI) disasters are one of the most severe dangers to power grid safety. Automatic iced transmission line identification is critical in various fields. However, existing methods primarily focus on the linear characteristics of transmission lines, employing a two-step process involving edge and line detection for PTLI identification. Nonetheless, these traditional methods are often difficult when confronted with challenges such as background noise or variations in illumination, leading to incomplete identification of the target area, missed target regions, or misclassification of background pixels as foreground. We propose a new iced transmission line identification scheme to overcome this limitation. In the initial stage, we integrate the image restoration method with image filter enhancement to restore the image's color information. This combined approach effectively retains valuable information and preserves the original image quality, thereby mitigating noise presented during the image acquisition. Subsequently, in the second stage, we introduce an enhanced multi-threshold algorithm to separate background and target pixels. After image segmentation, we enhance the image and obtain the region of interest (ROI) through connected component labeling modification and mathematical morphology operations, eliminating background regions. Our proposed scheme achieves an accuracy value of 97.72%, a precision value of 96.24%, a recall value of 86.22%, and the specificity value of 99.48% based on the average value of test images. Through object segmentation and location, the proposed method can avoid background interference, effectively solve the problem of transmission line icing identification, and achieve 90% measurement accuracy compared to manual measurement on the collected PTLI dataset.

This work focused on proposing a plan for improvement and control of the customer service process in a customer service center, based on a waiting line analysis where it describes all the elements that interact in the system and a statistical analysis of processes to define the state in which it operates. Subsequently, the simulation of processes is applied to represent the system studied, and with it, to be able to evaluate different strategies for improvement and increase in productivity. The following strategies were evaluated: correction of the instability of customer service processes, establishment of new specification limits according to the promise of value to be fulfilled to customers, human resource management, administrative technical support. Finally, with the results obtained from the simulation of the system, the improvement and productivity increase plan is planned according to the DMAMC (Define, Measure, Analyze, Improve, Control, or DMAIC) continuous improvement cycle established in six sigma

Globally, gastric cancer is a major cause of cancer mortality, with a 5-year survival rate of 32% for locally advanced and metastatic gastric cancer. This systematic literature review summarized the clinical, safety, and humanistic outcomes associated with systemic regimens given as first line therapy for locally advanced and metastatic gastric cancer. The search included articles published in English in PubMed, Embase, Web of Science, Cochrane Central Register of Controlled Trials, and the American Society of Clinical Oncology meeting library, from inception to April 2022. Phase II and III randomized controlled trials conducted among western populations diagnosed with stage III and IV locally advanced and metastatic gastric cancer were included. Two investigators independently reviewed the studies, conducted data extraction, and assessed risk of bias in accordance with PRISMA guidelines. Twenty-four randomized controlled trials totaling 8,705 patients were included. Median overall survival ranged from 5.0-13.1 months, median progression-free survival ranged from 2.0-7.7 months, and objective response ranged from 13.0-64.1%. Two studies reported higher quality of life outcomes. Grade 3 and 4 adverse events were reported in most studies. Improvement in clinical outcomes can be seen in recently published randomized controlled trials for locally advanced and metastatic gastric cancer.

Background and Objectives: The purpose of this study was to assess the bleeding that occurs during the first weeks of gestation and its implications throughout pregnancy. Secondarily, we studied the associated complications that appeared and tried to identify possible risk factors that could serve to select women at a greater risk of adverse outcomes that could benefit from an early diagnosis and improved monitoring. Materials and Methods: We selected all the women who consulted for first trimester metrorrhagia in the Emergency Department of the Hospital QuirónSalud in Malaga over the year 2015. We refer to first trimester metrorrhagia as that which occurs until week 12+6. Once the pregnant women were identified, we studied certain risk factors already present prior to the gestation and others associated with the gestation and its evolution. Results: After reviewing the visits to the obstetrics and gynecology emergency department, we selected those patients that met the inclusion criteria, resulting in a sample of 696 patients that we followed up. The average age of our patients was 34.1 years, with an average number of visits to the hospital of 1.67, most of them between the 5th and 8th weeks of pregnancy. 45.3% of these pregnancies resulted in a first trimester miscarriage, mainly between weeks 6 and 8. We tried to establish associations in order to identify possible risk factors, finding a relationship between increased maternal age and a higher risk of first trimester pregnancy loss, which rises as maternal age increases (33,37 4,316 years vs 35,01 4,740 years). This increase in risk is proportional to the increase in age. We made subgroups of women over 35 and over 40 and confirmed that increased age led to worse outcomes. We also studied several gestational complications and concluded that they appeared more frequently among older women. These complications include prematurity (33.11 vs 34.48 years), gestational diabetes (33.11 vs 36.06 years) and preeclampsia (33.25 vs 35 years). We reviewed the obstetric history of pregnant women whose gestation resulted in miscarriage and found that 50.5% of them had previously had another loss. Conclusions: Comparing the results with data from the general population, we found that the rate of first trimester miscarriage is up to 3 times higher among women who present bleeding during the first weeks of gestation compared to those who do not develop this complication. Maternal age is a risk factor for first trimester pregnancy loss and for the development of complications associated with pregnancy.

(1) Background: The COVID-19 pandemic has affected healthcare utilization rates on a global scale. This study aimed to analyze whether the COVID-19 pandemic affected the characteristics of first-visit patients with peripheral facial palsy visiting a Korean Medicine hospital and to observe characteristics changes in them. (2) Methods: This study analyzed the electronic medical records of 2,310 first-visit patients with peripheral facial palsy who visited the Facial Palsy Center, Korean Medicine Hospital, Kyung Hee University Medical Center from January 1, 2019 to December 31, 2021 in terms of demographic characteristics, disease phase, residence locations, hospital visit route, and patient care type. (3) Results: There were significant relationships between the presence of the COVID-19 pandemic (i.e., before and during) and the number of patients by disease phase (p=0.043), residence locations (p=0.003), residence locations in Seoul (p=0.003), and patient care types (p=0.003). (4) Conclusions: There were several differences in characteristics of first-visit patients with peripheral facial palsy visiting a Korean Medicine hospital during COVID-19 pandemic in terms of demographic characteristics, disease phase, residence locations, residence locations in Seoul, and patient care types.

A retrospective cohort study was performed to determine the likelihood of malignant stroke after mechanical thrombectomy via ASPECTS-PASS score(A-P score), a novel scoring system using ASPECT score and number of arterial-passes. This prediction score is designed to help clinicians take early measures. Malignant stroke is defined as a large MCA infarct with mass effect that develops during the first 5 days following presentation and is associated with approximately 80% mortality. Previous studies have shown an association of low ASPECTS and high number of passes with poor outcome.We performed a retrospective cohort analysis on 78 patients with anterior circulation stroke who underwent mechanical thrombectomy at our hospital. We analyzed the likelihood of developing malignant stroke post thrombectomy in the first 5 days following successful recanalization (TICI ≽ 2b). Malignant stroke is defined as severe symptoms secondary to edema as evidenced by midline shift, cistern engorgement, and hemorrhagic conversion with edema. Patients with ASPECTS of 0-5 were excluded. We used two variables to predict the outcome: ASPECT score and number-of-passes. We used the equation ASPECT score minus number-of-passes (A-P) to arrive at a single number to predict the risk of malignant stroke. A-P scoring scale ranged from 0-9. Our study showed a statistically significant inverse relationship of A-P score and risk of malignant stroke. Approximately 90% of patients with A-P score < 5 developed malignant stroke in our study. A-P score can help predict malignant stroke post thrombectomy even after successful recanalization. Thus, A-P score of ≤ 5 suggests very high risk. (A-P) Score can assist clinicians to take early measures, and thereby prevent worse outcomes.

This study compares the action of different handpieces (turbine, high-speed electric handpiece and piezoelectric device) on surface roughness of enamel and dentin when using diamond-coated working tips and burs of the same grit size. Experiment was conducted on 15 extracted first molars from patients aged 45 to 60 years. The occlusal portion was removed using a diamond-coated water wheel and then refined with a 120-130 μm grit bur in order to obtain a flat surface with an adequate exposition of the dentin core. Each surface was divided into three portions and every portion was finished with one of the three tested instruments. Rotary burs and piezoelectric tips had the same grit size (60 μm) and load on handpiece during preparation never exceeded 150 g. Surface roughness parameters (Ra, Rsk, Rku) were recorded with an optical profilometer and SEM analysis of treated surfaces and working tips was conducted. Ra and Rsk differed significantly between enamel and dentin only after using turbine (p=0.004 and p=0.007, respectively). No significant differences were observed in Ra, Rsk, and Rku between enamel and dentin when using high-speed electric handpiece or piezoelectric device. Turbine produced higher Ra and Rsk values on dentin than the other devices, while no significant differences were found between piezoelectric handpiece and high-speed electric contra-angle on both substrates. Summarizing, the findings of the present study demonstrated that turbine generated rougher surfaces on dentin compared to the other handpieces. Moreover, the turbine produced more asymmetrical surface profiles on both enamel and dentin. However, it should be considered that these differences in roughness (Ra) were within the range of 0.25-0.30 μm: it is still unclear if these variations, although statistically significant, will influence final clinical outcomes.

The images captured by UAVs during inspection often contain numerous small targets related to transmission lines, which are critical and vulnerable elements for ensuring the safe operation of these lines. However, due to various factors such as the small size of the targets, low resolution, complex background, and potential line aggregation, achieving accurate and real-time detection becomes challenging. To address these issues, this paper proposes a detection algorithm called P2-ECA-EIOU-YOLOv5 (P2E-YOLOv5). Firstly, in order to address the challenges posed by the complex background and environmental interference that impact small targets, an ECA attention module is integrated into the network. This module effectively enhances the network's focus on small targets while concurrently mitigating the influence of environmental interference. Secondly, considering the characteristics of small target size and low resolution, a new high-resolution detection head is introduced, which is more sensitive to small targets. Lastly, the network utilizes the EIOU-Loss as the regression Loss function to improve the positioning accuracy of small targets, as they tend to aggregate. Experimental results demonstrate that the proposed P2E-YOLOv5 detection algorithm achieves an accuracy P of 96.0% and an average accuracy (mAP) of 97.0% for small target detection in transmission lines.

The use of unmanned aerial aircrafts (UAVs) is governed by strict regulatory frameworks that prioritize safety. To guarantee safety, it is necessary to acquire and maintain situational awareness (SA) throughout the operation. Existing Canadian regulations require pilots to operate their aircrafts in visual line-of-sight. Therefore, the task of acquiring and maintaining SA primary falls to the pilots. However, the development of aerial transport is entering a new era with the adoption of a highly dynamic and complex system known as advanced air mobility (AAM), which involves UAV operating autonomously beyond visual line-of-sight. SA must therefore be acquired and maintained primarily by each UAV through specific technologies and procedures. In this paper, we review these technologies and procedures in order to decompose the SA of the UAV in the AAM. We then use the system modeling language to provide a high-level structural and behavioral representation of the AAM as a system having UAV as its main entity. In a case study, we analyze one of the flagships UAVs of our industrial partner. Results show that this UAV doesn’t have all the technologies and methodologies necessary to achieve all the identified SA goals identified for the safety of the AAM. This work is a theoretical framework intended to contribute to the realization of the AAM, and we also expect to impact the future design and utilization of UAVs.

Neuromorphic computing, reconfigurable optical metamaterials operational over a wide spectral range, holographic and nonvolatile displays of extremely high resolution, integrated smart photonics and many other applications need phase-change materials (PCMs) of the next generation with better energy efficiency, wider temperature and spectral range for reliable operation compared to current flagship PCMs as Ge2Sb2Te5 or doped Sb2Te. Gallium tellurides are promising candidates to achieve the necessary requirements because of higher melting and crystallization temperatures, combined with a low switching power and fast switching rate. At the same time, Ga2Te3 and non-stoichiometric alloys appear to be atypical PCMs, characterized by regular tetrahedral structure and the absence of metavalent bonding. The sp3 gallium hybridization in cubic and amorphous Ga2Te3 is also different from conventional p-bonding in flagship PCMs, raising a question of the phase-change mechanism. Besides, gallium tellurides exhibit a number of unexpected and highly unusual phenomena as nanotectonic compression or viscosity anomaly just above melting. Using high-energy X-ray diffraction, supported by first-principles simulations, we will unravel the atomic structure of amorphous Ga2Te5 PLD films, compare it with the crystal structure of tetragonal gallium pentatelluride, and investigate electrical, optical and thermal properties of these two materials to estimate their potential for memory applications as well as for other fields.

The development of high-performance sensing materials for detecting or removing SF₆ decomposition gases is crucial for gas-insulated switchgear (GIS). In this work, the adsorption characteristics of the pristine porphyrin (Pr) and Fe-doped porphyrin (FePr) monolayers towards SF₆ decomposition gases were investigated using the first-principles calculations. Additionally, the electronic properties and sensing-mechanism were also examined. The findings indicate that both Pr and FePr monolayers exhibit thermodynamic stability. The intrinsic Pr monolayer only exhibits a moderate affinity towards the SO₂ molecule, however, its poor sensitivity of the Pr monolayer renders it unsuitable as the sensing-material. In contrast, the FePr monolayer exhibits favorable adsorption strength towards all five toxic gases (H₂S, SO₂, SOF₂, SO₂F₂, HF). The FePr monolayer exhibits chemisorption towards SO₂/SOF₂ gases, Furthermore, the microscopic mechanism of gases-substrate interaction is elucidated through the analysis of charge density difference, charge transfer, and density of states. Moreover, the FePr has excellent sensitivity for H₂S, SO₂, SO₂F₂, SOF₂ and HF molecules owing to the significant variations of the band gap, electrical conductivity and work function. In addition, the τ of H₂S, SO₂, and SOF₂ is 12.6 μs, 18.5 s and 15.4 s at 298 K, respectively. Our calculated results can offer theoretical guidance for the practical application of FePr-based sensing materials to detect SF6 decompositions gases.

The integration of spray drying and agglomeration offers significant advantages, such us continuous production with lower energy consumption. However, it is a knife-edge process with a narrow operating window and limited degrees of freedom that decide between successful agglomeration and fluidized bed blockage due to excessive moisture. In this contribution, factors influencing the spray-through agglomeration process of skim milk powder as a model system were investigated via a design of experiments. Three in-line monitoring methods were applied and tested to observe the most important parameters in the agglomeration process: product moisture and particle size distribution. Regarding the moisture content, a capacitive moisture sensor was calibrated with linear regression and a near-infrared sensor with partial least squares regression. Near-infrared spectroscopy was found to be the suitable method for determining moisture content, while the capacitive moisture sensor mainly provides information on the bulk density, the filling level or fluidization state in the fluidized bed. Additionally, particle size distribution data was extracted from the spectral data using in-line data of a spatial filter velocimetry probe in the fluidized bed. This opens the potential to monitor both parameters in real-time with a single non-invasive sensor.