Plant responses to different light and water availability are variable among species and their re-spective phenotypic plasticity, and the combination between these two abiotic factors can alleviate or intensify stressful effects. This study aimed to evaluate the impacts of exposure time of Cedrela fissilis Vell. seedlings to different water and light availability and the interaction of these factors. Seedlings were submitted to combinations of three shading levels – SH (0, 30 and 70%) and three water regimes based on the water holding capacity (WHC) in the substrate, constituting nine cul-tivation conditions: T1 – 0% SH + 40% WHC; T2 – 0% SH + 70% WHC; T3 – 0% SH + 100% WHC; T4 – 30% SH + 40% WHC; T5 – 30% SH + 70% WHC; T6 – 30% SH and 100% WHC; T7 – 70% SH + 40% WHC; T8 – 70% SH +70% WHC; T9 – 70% SH + 100% WHC. C. fissilis seedlings respond to water deficit, here represented by 40% WHC, regardless of exposure time, and when cultivated in full sun, the stressful effects were enhanced, acting in a synergistic manner. The condition that provided better gas exchange performance and greater total dry mass accumulation for C. fissilis seedlings was 30% shading combined with 100% WHC. C. fissilis seedlings have physiological plasticity and resilience to survive under different water and light conditions.

The temporary immersion system bioreactor named GreenTray®[2], [3]presents advantages over the existing ones. Firstly, there is no need to use forceps to move the shoots or plantlets in or out of the recipient, neither the use of scalpel to divide them. Secondly, the basis of the shoot can remain in the GreenTray® and can sprout again in several cycles of growth. These two characteristics reduce the costs in the process of micropropagation. Besides, shoots or plantlets development is enhanced by the aeration of the recipient, thus enriching with CO2 the recipient atmosphere. The chapter describes and provides images and values of interest in (1) the micropropagation process of some commercial Prunus or Pyrus rootstocks; (2) the plantlet growth under autotrophic conditions; and (2) the inoculation of plants with pathogens that reproduce in vitro the symptoms observed in vivo, using the GreenTray® bioreactor.

This paper presents geometric analyses of welded frames after free relaxing and vibratory stress relief (VSR). Respected frames were tested components of a prototype packaging machine. Two types of relaxation were carried out to remove stresses introduced as a result of welding process. One of the frame was subjected to free relaxing, while the other one to accelerated vibration relaxing. Detection of the frame geometry changes was performed using a photogrammetric system. In addition, an evaluation of the geometry change was conducted for fifteen variants of steel frame support. A comparative analysis of the geometric deviations of the frames after free and vibratory stress relief confirmed the assumption that the frame after vibration stress relief better reproduces the nominal dimensions. Nevertheless, it should be emphasized that after vibratory stress relief the frame is not subject to further deformation, which is a desirable effect. In the case of free relaxing, the frame undergoes dimensional changes in a random manner. In summary, carrying out accelerated vibratory stress relief allows control of spontaneous dimensional changes in the designed frame of a packaging machine resulting from spontaneous relaxation of stresses arising from the welding process. The shortening of the relaxation process of the welded frame is also an unquestionable advantage.

Leaf springs are suspension components constituted of several structural and assembly components. Once the leaves are assembled, a stress state due to the assembly process is developed. Thus, the quantification of the assembly stress level should be known in order to be accounted for in the structural design. The aim of this article is precisely to quantify the assembly stress level in parabolic leaf springs for railway freight wagons. An experimental method with the aid of extensometry is considered to evaluate elastic assembly stresses. Next, a numerical model of the leaf spring assembly process with the required boundary conditions is developed to support the experimental results and allow obtaining a distribution of surface stresses along the master leaf length. The development of this work resulted in a surface stress profile along the length of the master leaf generated by the assembly process, where the deviations of the numerical outcomes regarding the analysed spots with strain gauges are mostly of little relevance.

Abstract: Kiwifruit, a perennial horticultural crop known for its nutritional value, faces significant challenges due to biotic and abiotic stresses, affecting its yield and quality. Leucine-rich repeat receptor-like proteins (LRR-RLPs), a major group of receptor-like proteins in plants, have diverse functions in plant physiology, including growth, development, signal transduction, and stress responses. Despite their importance, the specific roles of kiwifruit LRR-RLPs in response to biotic and abiotic stresses remain poorly understood. In this study, we investigated the expression patterns of kiwifruit LRR-RLPs under various stress conditions, including pathogen stress, heat stress, waterlogging stress, and copper stress. Through genome and transcriptome analyses, we identified a total of 101, 164, and 105 LRR-RLPs in Actinidia Chinensis 'Hongyang', Actinidia eriantha 'Huate', and Actinidia chinensis 'Red5' kiwifruit, respectively, classified into 9 subgroups based on phylogenetic relationships. Synteny analysis revealed that the expansion of kiwifruit LRR-RLPs was primarily attributed to segmental duplication events. Using RNA-seq data from pathogen-infected kiwifruits, we identified specific LRR-RLP genes potentially involved in different stages of pathogen infection. Additionally, we observed the potential involvement of kiwifruit LRR-RLPs in abiotic stress responses, with upstream transcription factors possibly regulating their expression. Furthermore, protein interaction network analysis unveiled the participation of kiwifruit LRR-RLP genes in the regulatory network of abiotic stress responses. These findings highlight the crucial roles of LRR-RLPs in mediating both biotic and abiotic stress responses in kiwifruit, offering valuable insights for the breeding of stress-resistant kiwifruit varieties.

The epigenetic mechanism of DNA methylation is essential for regulating gene expression and adaptation in plants, especially when exposed to various environmental stressors such as drought, heat, and nutrient availability. The impact of these stressors can lead to alterations in DNA methylation patterns and gene expression, which this study aims to investigate. Specifically, we are interested in understanding how DNA methylation plays a role in controlling the expression of stress-response genes, as well as genes involved in plant growth and development. To accomplish this, we are analyzing the changes in DNA methylation patterns and gene expression in response to different stressors like drought and heat. Our research findings suggest that DNA methylation is a vital regulator of plant adaptation to environmental stress, and we hope to gain further insight into these mechanisms by identifying genes that exhibit differential expression in response to stress and analyzing their DNA methylation status. This study offers valuable insights into the development of crops that can thrive under changing climate conditions.

Keywords: Amorphous-precipitate, Nitride, Morphological stability, Diffusion, Internal stresses, Modelling, Simulation

Endophytic fungi (EF) have emerged as promising modulators of plant growth and stress tolerance in agricultural ecosystems. This review synthesizes current knowledge on the role of EF in en-hancing crop adaptation to abiotic stress. Abiotic stresses, such as drought, salinity, and extreme temperatures, pose significant challenges to crop productivity worldwide. EF have shown re-markable potential in alleviating the adverse effects of these stresses. Through various mechanisms including synthesis of osmolytes, production of stress-related enzymes, and induction of plant de-fense mechanisms, EF enhance plant resilience to abiotic stressors. Moreover, EF promote nutrient uptake and modulate hormonal balance in plants, further enhancing stress tolerance. Recent ad-vancements in molecular techniques have facilitated the identification and characterization of stress-tolerant endophytic fungal strains, paving the way for their utilization in agricultural prac-tices. Furthermore, the symbiotic relationship between EF and plants offers ecological benefits, such as improved soil health and reduced dependence on chemical inputs. However, challenges remain in understanding the complex interactions between EF and host plants, as well as in scaling up their application in diverse agricultural systems. Future research should focus on elucidating the mechanisms underlying endophytic fungal-mediated stress tolerance and developing sustainable strategies for harnessing their potential in crop production.

Melatonin is a crucial regulator of plant growth and development as well as stress tolerance. However, we only have a limited understanding of the functions of endogenous melatonin. Tryp-tophan decarboxylase (TDC) serves as the initial rate-limiting enzyme in the melatonin synthesis pathway. Unfortunately, no cucumber TDC gene has been cloned and characterized. In this study, we identified two TDC genes (CsTDC1 and CsTDC2) in the cucumber genome. The subcellular localization analysis indicated CsTDC1 and CsTDC2 are predominantly localized in the cyto-plasm and plasma membrane. Tissue-specific expression analyses revealed that CsTDC1 and CsTDC2 are expressed in both vegetative and reproductive organs. Many cis-elements related to stress, hormone, and light responses as well as development were identified in the CsTDC pro-moter regions. Furthermore, the expression of CsTDC1 and CsTDC2 was strongly induced by treatments with various abiotic stresses and exogenous hormones. The transient overexpression of CsTDC1 and CsTDC2 in tobacco leaves resulted in increases in the TDC activity and melatonin content, which may be related to the enhanced ability of tobacco leaves to tolerate salt, drought, and low-temperature stresses. Notably, the overexpression of CsTDC2 had a more pronounced effect than the overexpression of CsTDC1. Accordingly, both CsTDC genes, but especially CsTDC2, may be important for regulating cucumber growth, development, and stress tolerance. The study findings provide a theoretical basis for future functional analyses of endogenous melatonin in cucumber.

Ethylene is an essential plant hormone critical in various physiological processes. These processes include seed germination, leaf senescence, fruit ripening, and the plant's response to environmental stressors. Ethylene biosynthesis is tightly regulated by two key enzymes, namely 1-aminocyclopropane-1-carboxylate synthase (ACS) and 1-aminocyclopropane-1-carboxylate oxidase (ACO). Initially, the prevailing hypothesis suggested that ACS is the limiting factor in the ethylene biosynthesis pathway. Nevertheless, accumulating evidence from various studies has demonstrated that ACO, under specific circumstances, acts as the rate-limiting enzyme in ethylene production. Under normal developmental processes, ACS and ACO collaborate to maintain balanced ethylene production, ensuring proper plant growth and physiology. However, under abiotic stress conditions, such as drought, salinity, extreme temperatures, or pathogen attack, the regulation of ethylene biosynthesis becomes critical for plants’ survival. This review highlights the structural characteristics, examines the transcriptional, post-transcriptional, and post-translational regulation of ACS and ACO, and their role under abiotic stress conditions. Reviews on the role of ethylene signaling in abiotic stress adaptation are available. However, a review that delineates the role of ACS and ACO in abiotic stress acclimation is not available.

Expansins (EXPs) which are the essential components of plant cell wall function as relaxation factors to directly promote turgor-driven expansion of cell wall and control plant growth and development and diverse environmental stress responses. A lot of EXPs genes have been widely identified and characterized in numerous plant species, but not in sweetpotato. In the present study, a total of 59 EXPs genes that unevenly distributed onto 14 of 15 chromosomes were identified from sweetpotato genome, and segmental and tandem duplications were exhibited to act as dominant functions in IbEXPs diversity. Phylogenetic analysis exhibited that IbEXPs members were clustered into four subfamilies according to EXPs in Arabidopsis and rice and the regularity of motif, domain and gene structures was in accordance with the subfamily classification. The collinearity analysis between IbEXPs and related homologous sequences in 9 plants provided the phylogenetic insights of EXPs gene family. Cis-element analysis futhrer revealed the potential roles of IbEXPs in sweetpotato development and stress responses. Evidence from RNA-seq and qRT-PCR analysis of eight selected IbEXPs genes displayed their various tissue specificity in different tissues, and their transcripts were varyingly induced or suppressed under multiple hormone treatments (ABA, SA, JA and ACC) and abiotic stresses (low and high temperature). These results supply worthy foundations to further comprehensively investigate the exact functions of IbEXPs genes, and multiple members may function as promising regulators to control plant development and enhance the stress resistance of transgenic plants.

The agricultural sector faces challenges due to climate change and the growing global population. Alkaline stress could adversely impact plant growth and crop production. This stressor diminishes water quality essential for crop cultivation, consequently impairing plant growth and overall productivity. Gamma-aminobutyric acid (GABA), a non-protein amino acid, may exhibit multifaceted roles in plant responses to adverse environmental conditions. Optimization of crop production in controlled environmental agriculture under artificial light attracted much attention. In the present study, we investigated the effects of different light spectra and GABA concentrations on Lollo Rosso lettuce plants under alkaline stress. Seedlings were placed under different light spectra [red (R), blue (B), white (W), 3R:1B, and 2R:1B:1far-red (FR)] and treated by GABA (0 and 50 µmol). Alkaline conditions were instituted by applying NaHCO3 at a concentration of 40 mM. The experiment incorporated a control treatment without NaHCO3. In general, R light exposure caused the highest growth performance of lettuce plants. GABA augmented biomass production in control and alkaline-treated plants across all light spectra. Additionally, it increased the concentrations of photosynthetic and protective pigments under alkaline conditions. GABA also improved the photosynthetic performance under all light spectra. Non-photochemical quenching and pigmentation were enhanced by exposure to B light, especially in plants treated with GABA. Alkaline stress induced an increase in soluble carbohydrate content in the lettuce leaves. These findings highlight the support of GABA application in facilitating coping plants to alkaline stress.

Chromium-nickel austenitic stainless steels are widely used due to their high corrosion resistance, good weldability and deformability. To some extent, their application is limited by their mechanical characteristics. As a result of their austenitic structure, increasing the static and dynamic strength of the components can be achieved by surface cold work. Due to the tendency of these steels to undergo intercrystalline corrosion, another approach to improve their mechanical characteristics is the use of low-temperature thermo-chemical diffusion processes. This article proposes a new combined process based on sequentially applied diamond burnishing (DB) and low-temperature gas nitriding (LTGN) to optimally improve the fatigue strength of 304 steel. The essence of the proposed approach is to combine the advantages of the two processes (DB and LTGN) to create a zone of residual compressive stresses in the surface and subsurface layers–the enormous surface residual stresses (axial and hoop) introduced by LTGN, with the significant depth of the compressive zone characteristic of static surface cold working processes. DB (both smoothing and single-pass hardening), in combination with LTGN, achieves a fatigue limit of 600 MPa, an improvement of 36.4% compared to untreated specimens. Individually, smoothing DB, single-pass DB and LTGN achieve 540 MPa, 580 MPa and 580 MPa, respectively. It was found that as the degree of plastic deformation of the surface layer introduced by DB increases, the content of the S-phase in the nitrogen-rich layer formed by LTGN decreases, with resultant increased content of -phase, and a new (also hard) phase: stabilized nitrogen-bearing martensite.

Fastener holes are among the most common natural stress concentrators in metal structures. The life cycles of various structural elements, such as those in aircraft structures, automobiles, and rail-end bolt joints are limited by fatigue damage around the holes. An effective approach to delay the formation and growth of fatigue macrocracks is to introduce residual hoop compressive stresses around the holes. Two methods have become established in the prestressing of fastener holes in aircraft components: split sleeve and split mandrel, which implement one-sided processes. The common disadvantage of both methods is the complex procedure due to the need for high accuracy of the initial holes. This article presents a new modified split mandrel method providing the same tightness (interference fit) with a wide tolerance of the pre-drilled hole diameters reducing the number of technological cycle steps and production costs. То implement the new method, a functionally connected tool and a device with a hydraulic drive were developed. An extensive experimental study of 2024-T3 AA specimens was carried out to evaluate the effectiveness of the method under a high scattering of the pre-drilled holes. The new method provided a deep zone of residual hoop compressive stresses on both faces of the specimens after cold working and after hole final reaming. The removal of a plastically deformed layer around the hole of suitable thickness during the final reaming decreased the axial gradient of residual hoop stress distribution. Fatigue tests on a tensile pulsating cycle verified the effectiveness of the modified split mandrel method to significantly increase the fatigue life by 6.6 times based on cycle fatigue strength compared to the conventional case of machining the holes. The obtained S-N curves for three groups of samples with initial hole diameters of 8.0, 8.1, and 8.2 mm which were cold worked with the same tightness of 0.32 mm and final reamed, aligned well indicating that the new method can provide constant fatigue strength for a given stress amplitude.

Plant growth and productivity are hindered by abiotic stresses. Crop productivity and the ecosystem are suffering due to climate change and harmful farming practices. We urgently need to use environment-friendly techniques like Arbuscular Mychorriza Fungi (AMF) to improve crop productivity. It is a well-established fact that AMF are effective bio-fertilizers. It is believed that AMF injections can increase plant resilience to stressors like heat,metals, salt, drought, and extreme temperatures. AMF aids in enhancing tolerance mechanisms and safeguarding essential metabolic pathways. AMF, as natural root symbionts, give plants important inorganic nutrients, helping them grow better, produce more, and acclimatize even under stress. AMF acts as a bio-fertilizer, boosting plants’ ability to adjust to different environments. Thus, researchers need to conduct further studies on how AMF promotes crop quality and productivity. This review describes the current understanding of AMF’s impact on host plants at their different growth stage, their benefits, applications, and the significance of plant nutrient relationships with AMF.

Universal Stress Protein (USP) plays an important regulatory role in the response to abiotic stress. Most of the research related to USP so far has been conducted on plant models such as Arabidopsis, rice, and cotton. The potato is one of the four major food crops in the world. Therefore, it is of great significance to study the expression pattern of the potato StUSP gene family under abiotic stress conditions. In this study, a total of 108 USP genes were identified from the genome of the Atlantic potato, divided into four subgroups. And based on the genetic structure, the physical and chemical properties of proteins and other aspects of their biological characteristics are comprehensively analyzed. Collinear analysis showed that the homologous genes of StUSPs and four other representative species (Arabidopsis, rice, coyote tobacco, and tomato) were highly conserved. The cis-regulatory elements of the StUSPs promoter are involved in plant hormones, environmental stress, mechanical damage, and light response. RNA-seq analysis showed that under different abiotic stresses, there are differences in the expression patterns of members of each subgroup. WGCNA co-expression analysis of the central gene showed that the differential co-expression gene is mainly involved in the plant-pathogen response process, plant hormone signal transduction, and the biosynthesis process of secondary metabolites. Through qRT-PCR analysis, it was confirmed that StUSP13, StUSP14, StUSP15, and StUSP41 may be important candidate genes involved in the response to adversity stress in potatoes. The results of this study provide the basis for further research on the functional analysis of StUSPs in the potato response to adversity stress.

The paper aims to introduce user-friendly modelling approaches to analyze how abiotic factors influence various trophic levels within the marine ecosystem, both naturally and through human impact. It specifically investigates the connections between environmental parameters (like temperature, salinity, and nutrients) and plankton along the Romanian Black Sea coast during the warm season (May-September) over a decade. Utilizing machine learning (ML) algorithms and data collected during this period, models were developed to project the proliferation of zooplankton. During the warm season, water temperature emerged as a significant factor affecting copepods and “other groups” zooplankton densities, while no discernible impact was noted on Noctiluca scintillans blooms. Salinity fluctuations notably influenced typical phytoplankton proliferation, with phosphate concentrations primarily driving widespread blooms. Two scenarios were explored for forecasting zooplankton growth: Business as Usual, predicting modest increases in temperature, salinity, and constant nutrient levels, and the Mild scenario, anticipating more substantial temperature and salinity increases while nutrients decrease significantly by 2042. The findings highlight that under both scenarios, Noctiluca scintillans displays notably high densities, with the second scenario projecting even higher values, surpassing the first by around 70%. These densities indicate characteristics of a eutrophic ecosystem, suggesting the potential implications of altered abiotic factors on ecosystem health.

Abiotic stress is an adverse environmental factor that severely affects plant growth and development, and plants have developed complex regulatory mechanisms to adapt to these unfavourable conditions through long-term evolution. In recent years, many transcription factor families of genes have been identified to regulate the ability of plants to respond to abiotic stresses. Among them, AP2/ERF (APETALA2/ethylene responsive factor) family is a large class of plant-specific that regulate plant response to abiotic stresses and can also play a role in regulating plant growth and development. This paper reviews the structural features and classification of AP2/ERF transcription factors, that transcriptional regulation, reciprocal proteins, downstream genes and hormone-dependent signalling and hormone-independent signalling pathways are involved in the response to abiotic stress. The study of AP2/ERF transcription factors and interacting proteins, as well as the identification of their downstream target genes, can provide us with a more comprehensive understanding of the mechanism of plant action in response to abiotic stress, which can improve the tolerance ability of plants in abiotic stress, and provide more theoretical basis for rice to obtain more yields under abiotic stress.

In this paper, for the Reynolds-averaged Navier-Stokes equations, a self-closed turbulence model without any adjustable parameter is formulated and a simple model is proposed. The validation rule for self-closed turbulence model is rigorously derived from the Reynolds-averaged Navier-Stokes equation. The rule is not effected by turbulence modelling on the Reynolds stresses. As an application, two dimensional turbulent boundary layers, and plate turbulent boundary layers have been formulated.

The paper presents the results of experimental studies and mathematical modeling of the effect of stress accumulation in thermosetting epoxy polymer "hot" curing on anhydride hardener. Stress accumulation occurs under cyclic thermomechanical action in a locked rod, similar effects are observed, for example, in thermoplastic elements subjected to the combined effect of mechanical loads and variable temperatures. Experimental results have shown that under cyclic thermomechanical loading during exploitation it is possible to accumulate residual stresses in the thermosetting polymer. A multi-element structural mathematical model with memory for thermomechanical load, which allows to consider the accumulation of residual thermal stresses, has been proposed. The results of modeling and experiment are compared. Based on the results, corrections are made in the approach to the application of this model to thermosetting polymers such as the epoxy resin under study. Considering the corrections, a good agreement (the difference is from 1 to 6%) with the results of experimental determination of stresses under complex cyclic thermomechanical load was obtained.

Plant protein phosphatase 2Cs (PP2Cs) serve as negative regulators of protein kinase cascades activated in different processes and play important roles in plant development and abiotic-stress-mediated signaling pathways. In this study, a genome-wide study was conducted on the CqPP2C gene family. A total of putative 117 CqPP2C genes were identified. Comprehensive analyses of physical and chemical feature, chromosome localization and subcellular localization were conducted. According to phylogenetic analysis, CqPP2Cs were divided into 13 subfamilies. CqPP2Cs in the same subfamily had similar gene structure, conserved motif and all the CqPP2C proteins had the type 2C phosphatase domains. Gene duplication revealed that segmental duplication was the major driving force for CqPP2Cs expansion and all duplicated CqPP2Cs evolved from purifying selection. The expression of CqPP2Cs in various tissues under different abiotic stresses was analyzed using RNA-seq data. The results revealed that CqPP2C genes were involved in regulating development and stress responses of quinoa. Real-time quantitative reverse transcription PCR (qRT-PCR) analysis of six CqPP2C genes in subfamily A revealed that they were up-regulated or down-regulated under salt and drought treatments. Furthermore, the results of yeast two-hybrid assays revealed that subfamily A CqPP2Cs interacted not only with subclass III CqSnRK2s, but also with subclass II CqSnRK2s. Subfamily A CqPP2Cs could interact with CqSnRK2s in different combinations and intensities to respond to various biological processes and stresses. Overall, our results will be useful for understanding the functions of CqPP2C in regulating ABA signals and responding to abiotic stress.

The article is devoted to the analytical and numerical study of the pattern of propagation and attenuation, due to Coulomb friction, of shear waves in an infinite thin elastic plate with a circular orifice of radius lying on a rough base. In the field of motion, an exact analytical solution of a nonlinear boundary value problem for tangential stresses and transversal velocities is obtained in quadratures by the method of Laplace transformations. It turned out that the complete exhaustion of the wave front of a strong rupture occurs at a finite distance from the center of the hole and an elementary formula is given for this distance (the case of tangential forces instantly applied to the orifice boundary, and then constant in time, is considered). For various ratios of the magnitude of the limiting friction force to the amplitude of the applied load, the trailing wave fronts are obtained, after which a state of static equilibrium between the elastic and friction forces with a nonlinear distribution of residual deformations is established in the region .

Global agriculture has been forced to increase food production to feed the growing human population, while confronting various environmental obstacles such as global warming, resistance to pathogens, and constraints on arable land caused by soil salinity, drought, rising sea level, saltwater intrusion, and urbanization. Regarding abiotic stresses, salinity is a worldwide problem for agricultural production. Many efforts, therefore, have been made to cope with the environmental challenges, however, the progress of salinization, which is mainly caused and accelerated by anthropogenic activities, is likely faster than our progress in finding ways to deal with this problem. In addition, drought represents a global threat to the production of major crops. In addition, pests and pathogens cause significant crop losses and diminish global food security. Among the various strategies that have been investigated and applied in plant science, antimicrobial peptides derived from plants have caught widespread attention from scientists since these peptides exhibit beneficial biological activities. In agricultural science, there have been reports on the roles of antimicrobial peptides with active properties against biotic and abiotic stresses. Non-specific plant lipid transfer proteins, thionins, systemins, defensins, cyclotides, and heveins-like antimicrobial peptides are common antimicrobial peptides that have been found to be involved in the defense system against fungi and insect pests. Based on their potential ability to protect crops from pests, bacteria, and pathogenic fungi, the use of antimicrobial peptide genes in creating transgenic plants has been largely conducted during the last decades, and these studies have obtained positive results against the growth of fungi and bacteria. This review will focus on the latest progress in studies of antimicrobial peptides related to biotic and abiotic stress tolerance in plants. We will also update the current progress in the development of antimicrobial peptide-based transgenic crops.

The emergence of new plant diseases is an increasingly important concern. Climate change is likely to be among the factors causing most of the emerging diseases endangering forest and tree heritage around the world. Such diseases may be caused by latent pathogens or microorganisms cryptically associated with plants. The shift from a non-pathogenic to a pathogenic stage may depend on physiological alterations of the host, environmental changes and/or stress factors. In some woods of the Salento peninsula (Apulia region, Italy) sudden declines of holm oak plants (Quercus ilex L.) have been observed since 2016. The morphological and molecular characterization of representative fungal isolates associated with canker and necrosis in declining plants indicated that these isolates belong to the Botryosphaeriaceae family, and the most frequent species were Diplodia corticola and Diplodia quercivora, followed by Neofusicoccum vitifusiforme. In artificially inoculated young holm oak plants, both D. corticola and D. quercivora species produced intense and severe subcortical and leaf margin necrosis. N. vitifusiforme, although less aggressive, induced the same symptoms. Our research in addition to confirm the involvement of D. corticola in olm oak decline, represents the first report of D. quercivora as a new pathogen on Quercus ilex in Italy. Furthermore, to the best of our knowledge, we also found N. vitifusiforme as a new pathogen on Q. ilex for the first time.

Poa crymophila is a perennial, cold-tolerant, native grass species, widely distributed to the Qing-hai-Tibet Plateau. However, the molecular mechanism behind the cold stress tolerance and role of key regulatory genes and pathways of P. crymophila are poorly understood yet. Therefore, the present study investigated the physiological and transcriptome responses of P. crymophila’s roots, stems, and leaves under cold stress to explore the molecular mechanism of cold tolerance. Results of the present study suggested that cold stress significantly changed the physiologic characteristics of roots, stems, and leaves of P. crymophila. In addition, the transcriptome results showed that 4434, 8793, and 14942 differentially expressed genes (DEGs) were identified in roots, stems, and leaves, respectively; however, 464 DEGs were commonly identified in these three tissues. The Gene On-tology (GO) results showed that a large numbers of DEGs were significantly enriched in the pho-tosynthetic related categories in leaves. In addition, the “response to stimulus” category was sig-nificantly enriched in roots and stems. The Kyoto Encyclopedia of Genes and Genomes (KEGG) results showed that DEGs involved in “phenylpropanoid biosynthesis” were significantly enriched in roots, “photosynthesis” and “circadian rhythm-plant” pathways significantly enriched in stems and leaves, starch and sucrose metabolism, and galactose metabolism were pathways significantly enriched in three tissues. Weighted gene coexpression network analysis (WGCNA) identified Hub genes involved in P. crymophila cold response. This study provides new insights into the molecular mechanisms underlying the cold tolerance of P. crymophila belowground and aboveground tissues. In addition, specific genes involved in Ca2+ signaling, ROS scavenging system, hormones, circadian clock, photosynthesis, and transcription factors (TFs) were identified in P. crymophila. The identi-fication of key genes may provide valuable resources for further functional genomic and breeding studies.

The aim of the research was to evaluate various fertilisation programs in increasing plant resistance to abiotic stress such as drought. It was tested whether the algal biostimulator provides the same tolerance to drought stress in highbush blueberry plants as regular fertilisers without biostimulation. The research was conducted in 2022 in a greenhouse in controlled drought conditions. Three-year-old highbush blueberry bushes (12 pieces) were used in the experiment. Highbush blueberry bushes (Vaccinium corymbosum) 'Brigitta Blue' cultivars were planted in plastic pots with a capacity of 10 dm3 containing an acidic substrate and placed in a greenhouse. Controlled lighting conditions were maintained using sodium lamps and a temperature of 25°C/20°C day/night. The substrate in pots was maintained at 80% of field water capacity by manual watering and weekly supply of nutrient solution for 5 weeks until water deficit occurred. Half of the plants were sprayed weekly with a biostimulant based on seaweed extract. Seven days after the third application of the product, half of the untreated and treated plants were subjected to water deficit stress by restricting water supply to 40% of field capacity. The tested biostimulator impacted on stimulating the activity of antioxidant enzymes but had no effect on the chlorophyll content in the leaves or the concentration of nutrients in the leaves. The effect of marine algae products on the yield quantity and high quality is related among other to bioactiv substances witch helps to prevent drought stress.

The plant water status is crucial for growth and production, but the current climate change scenario makes it challenging to match the water plant demand. Blueberry is an economically important crop and plays an acknowledged role in human health due to its antioxidant compounds. This research aimed to determine whether exogenous methyl jasmonate application improves the antioxidant defense mechanisms for protecting the photosynthetic performance in blueberry plants under the stress condition of water deficit. A greenhouse experiment was carried out under a 16-h light period; 20ºC; and 60-80% relative humidity for 2 weeks before treatment application of methyl jasmonate (MeJA) to blueberry plants (Vaccinium corymbosum, Brigitta cultivar). The following treatments were maintained for 7-days: (i) 80% field capacity (NoWD); (ii) 80% field capacity plus MeJA application (NoWD + MeJA); (iii) 20% field capacity (WD); and (iv) 20% field capacity plus MeJA application (WD + MeJA). The MeJA was sprayed as an aqueous solution of 10 µM MeJA (Sigma-Aldrich) over the plant's foliar system. At the end of the assay; blueberry leaves were analyzed for the relative water content; specific leaf area; lipid peroxidation; total antioxidant activity; total phenols; total anthocyanins; anthocyanidin compounds and photosynthetic performance. Brigitta cultivar showed a significant decrease in the oxidative stress at leaf levels; with an increase in antioxidant activity; phenolic compounds; total anthocyanins; delphinidin; petunidin; antheraxanthin; zeaxanthin; and an improvement in photosynthetic performance parameters. Blueberry Brigitta cultivar was shown to be susceptible to WD decreased mainly photosynthesis. However; the MeJA application on leaves induced metabolic changes; through an increase of antioxidant strategy within the plant to counteract the negative effects of WD; protecting the photosynthetic apparatus; which allows the Brigitta cultivar to withstand the period of WD.

Maize (Zea mays L.) stands as one of the most extensively cultivated crops globally, offering significant contributions to food, animal feed, and biofuel production. Maize yield is significantly impacted by diverse climate and soil variables, yet its productivity faces hindrances due to abiotic stresses, including drought, salinity, extreme temperatures, and cold conditions. In confronting these hurdles, the field of crop breeding has undergone a transformation thanks to high-throughput sequencing technologies (HSTs). These advancements have streamlined the identification of beneficial quantitative trait loci (QTL), associations between markers and traits (MTAs), as well as genes and alleles that contribute to crop improvement. Presently, well-established omics techniques such as genomics, transcriptomics, proteomics, and metabolomics are being amalgamated into maize breeding studies. These approaches have unveiled new biological markers that are being employed to bolster maize's capacity to withstand an array of challenges. In this chapter, we explore the current knowledge regarding the morpho-physiological and molecular mechanisms that underlie the resistance and tolerance of maize to biotic and abiotic stresses. The focus is on utilizing omics techniques to augment maize's ability to withstand these challenges. Moreover, it emphasizes the significant potential of integrating various omics techniques to tackle the challenges presented by biotic and abiotic stress in maize productivity, contrasting with singular approaches.

This study evaluated the exogenous application of PGRs substitute chemical fertilization without compromising the growth and yield of tomato in fluctuated day-night temperature and humidity stressed late winter. Two-factor experiment comprising chemical fertilizers at 100, 110, 90 and 80 % of recommended doses besides control and PGRs of GA3; NAA, 4-CPA and SA @ 50 ppm including control was conducted where treatments were assigned in triplicates. Results revealed no significant variation among the fertilizer doses (80% to 110% of recommendation) regarding growth and yield contributing traits while among the PGRs, GA3 @ 50 ppm produced maximum number of flower clusters plant-1 (16.85), flowers (8.80) and fruits (5.79) cluster-1, single fruit weight (67.83 g) and fruit yield (6.61 kg plant-1) of tomato that was statistically identical with the findings of SA. But significant reduction in yield was noted in NAA and 4-CPA (1.20 kg and 1.21 kg plant-1, respectively). Interestingly, GA3 and SA in combination with any doses of the studied fertilizers maximize the tomato morphological and reproductive traits while fertilizer plus NAA and 4-CPA interaction gave the inferior results. Further, correlation matrix and PCA findings revealed that five fertilizer doses have no distinctiveness whereas GA3 and SA has distinct position than other PGRs with the maximum dependent variables those were contributed positively in the total variations. The study findings suggested that 20% fertilizer requirement could be reduced with the substitution of GA3 and SA @ 50 ppm for successful cultivation of tomato in late winter having the extreme environmental issues.

Abstract: A multitude of biotic and abiotic stress factors do harm to plants by bringing about diseases and inhibiting normal growth and development. As an omnipotent signaling molecule, salicylic acid (SA) plays crucial roles in plants' tolerance responses to both biotic and abiotic stresses, thereby maintaining plants’ normal growth and improving yields under stresses. In view of this, this paper mainly discusses the role of SA in both biotic stresses, and abiotic stresses of plants. SA regulates the expression of genes involved in defense signaling pathways, thus enhancing plants’ immunity. In addition, SA mitigates the negative effects of abiotic stresses, and acts as a signaling molecule to induce the expression of stress-responsive genes and the synthesis of stress-related proteins. In addition, SA also improves certain yield-related photosynthetic indexes, thereby enhancing crop yield under stresses. On the other hand, SA acts with other signaling molecules in regulating plants’ growth and improving tolerances under stresses. This paper reviews recent advances in SA’s roles in plant stress tolerances, so as to provide theoretical references for further studies concerning the decryption of molecular mechanisms for SA’s roles and the improvement of crop management under stresses.

Carbon dots are carbon based nanoparticles, which have the characteristics of simple preparation process, photoluminescence, biocompatibility, adjustable surface function, water solubility, and low toxicity. They are widely used in biological applications such as imaging, biosensing, photocatalysis, and molecular transfer. It has also aroused great interest among researchers in agriculture and has made significant progress in improving crop growth and production. This review presents the physiological functions of carbon dots for crop growth and development, photosynthesis, water and nutrient absorption, and abiotic stress resistance and their applications in improving ecological environment and agriculture as biosensors, and the future application prospects and research directions of carbon dots in agriculture were prospected.

Abiotic stresses extensively reduce agricultural crop production globally. Traditional breeding approaches have been widely used to mitigate the risks of abiotic stresses. The discovery of gene editing technology for modifying stress-responsive genes and associated molecular networks has paved the foundation for sustainable crop management against environmental stress. Integrated approaches based on functional genomics and transcriptomics are now expanding the opportunities to elucidate the molecular mechanisms underlying abiotic stress responses. This review summarizes some of the features and weblinks of plant genome databases related to abiotic stress genes utilized for crop improvement. Clustered, regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas) based gene-editing tool has revolutionized stress tolerance research due to its simplicity, versatility, adaptability, flexibility, and broader applications. However, off-target and low cleavage efficiency hinder the successful application of CRISPR/Cas systems. Computational tools have been developed for designing highly competent gRNA with better cleavage efficiency. This powerful genome editing tool offers tremendous crop improvement opportunities, overcoming conventional breeding techniques' shortcomings. Furthermore, we also discuss the mechanistic insights of the CRISPR/Cas9-based genome editing technology. This review summarizes the current advances in understanding plant species' abiotic stress response mechanism and applying the CRISPR/Cas system genome editing technology to develop crop resilience against drought, salinity, temperature, heavy metals, and herbicides.

Hydrogels can be considered as mimics of extracellular matrix (ECM).Cytoskeleton through integrins is connected with ECM and cytoskeleton tension depends on ECM stiffness.A number of age-related diseases depend on cellular processes related with cytoskeleton function.Some examples of cancer initiation and progression and heart disease in relationship with ECM stiffness has been analysed.Incorporation of rigid particles in ECM can increase ECM stifness and to promote formation of internal residual stresses. Water migration, changes of water binding energy to biomactomolecules, changes of the state of water from tightly bound water to free and loosely bound water changes stiffness of ECM. Risks related with rigid particles incorporation into ECM have been also iscussed.

Unlike animals, persistent dynamic environmental perturbations threaten plants, as they are sessile. Plants keep an inbuilt database of all epigenetic episodes during their lifetime. Present knowledge for exploiting information about how the gene network of plants contributes to epigenetic memory needs to be improved, and extensive in-depth studies are needed. Data from epigenetic memories imparts intelligent behaviour to plants, and these memories can be decoded further to investigate how these plants respond when the same abiotic stress recurs. The epigenetic phenomenon refers to gene expression patterns, including vital factors such as nucleic acids (small ribonucleic acids), histones modelling and methylation of DNA. These changes are cell cycle-associated events that may be transmitted to successive generations. Epigenetic memories due to abiotic stress are necessary for maintaining healthy ecophysiological behaviour of plants and impart the tendency to resist and adapt to challenging environmental conditions. These intelligent memories can be stored and interpreted to prepare for future challenges.

Interference fits are a very common shaft-hub connection due to their low manufacturing cost and excellent technical properties. Plastic Conditioning of this machine element is a new and not very well known method. By exploiting residual stresses and the associated increase in the yield point, these components can absorb operating loads such as rotating bending moments, torsion, temperature changes and centrifugal forces purely elastically and avoid plastic deformation during operation. Compared to conventionally joined interference fits, the load bearing capacity in the elastic range can be increased by almost 200% and a specifically defined additional safety against plastic deformation in the elastic-plastic range can be ensured. This paper examines the effects of Reverse Yielding on the technology of Plastic Conditioning of Interference Fits in Power Transmission Engineering. Based on the Shear Stress Hypothesis (SH), the Plane Stress State (PSS) and the ideal plastic behavior of materials, the stress-mechanical relationships are explained, the influencing parameters are examined and conclusions are drawn for the plastic conditioning process. Taking into account the theoretical knowledge according to the state of the art, modified material behavior assumptions (isotropic hardening) and the Von Mises Yield Criterion (VMYC) are also considered. In addition, the method of plastic conditioning of interference fits is introduced and its basic principles are briefly explained. Along with computational suggestions to avoid Reverse Yielding, open issues requiring further research are identified.

Drought is an important factor seriously affects agricultural production worldwide. Agricultural practices that can increase resistance to drought are gaining importance. In this study the role of nano-silicon dioxide (NaSiO2) in countering drought stress in invitro strawberry plantlets were investigated. In the experiment, the effects of PEG 6000 concentrations (0, 4, 8%) and NaSiO2 concentrations (0, 50, 100 mg L-1) on invitro strawberry plants were determined. Plantlets treated with PEG 6000 showed reduced vegetative growth parameters, but this decrease was reduced with NaSiO2 application. NaSiO2 at 50 mg L−1 induced the maximum shoot and root fresh weight (1.20 g, 1.24 g, respectively) and length (40.09 mm, 34.26 mm, respectively), leaves number (16.67 pieces/plant) and SPAD index 53.57 among 4% and 8% PEG applications. When the SOD and CAT activities were examined, the results showed that application of NaSiO2 enhancement drought stress tolerance by promoted certain antioxidant response by increasing SOD and catalase (CAT) activities under drought stress. According to the results NaSiO2, limited the devastating impact of drought stress and markedly enhanced all the examined parameters.

Plant-microbial interactions are very crucial for the terrestrial ecosystem. At the rhizospheric, phyllospheric and endospheric regions, these interactions occur through different signalling pathways and play a pivotal role as they strengthen the plant defence mechanism against pathogen attacks and other stresses. A better knowledge of these relationships will help to develop novel solutions for sustainable agriculture and safeguarding the global food supply in the context of climate change and mounting environmental concerns. This chapter emphasises the role of the microbiome in providing resistance to plants against various environmental stresses and aiding in their improved adaption. This chapter also underscores the impact of the microbiome in providing resilience to plants under changing climatic scenarios.

The basic (region) leucine zippers (bZIPs) are evolutionarily conserved transcription factors widely distributed in eukaryotic organisms. In plants, they are not only involved in growth and development, defense and stress responses, and regulation of physiological processes, but also play a pivotal role in regulating secondary metabolism. To explore the function related to the bZIP gene family in Stevia rebaudiana Bertoni, we identified 105 SrbZIP genes at the genome-wide level and classified into 12 subfamilies using bioinformation methods. Analysis of physicochemical properties showed that the amino acid length readings ranged from 96 aa (SrbZIP13) to 704 aa (SrbZIP17), and the isoelectric point ranged from 4.64 (SrbZIP21) to 10.08 (SrbZIP101). The majority of these proteins (94.29%) were localized in the nucleus. Three main classes of cis-acting elements found in the SrbZIP promoter regions, including development-related elements (CAT-box), defense and stress-responsive elements (LTR/ARE/MBS), and phytohormone respon- sive elements (ABRE/TGACG-mitif/TCA-element). Through protein-protein interac- tion network of 105 SrbZIP proteins, SrbZIP proteins were mainly classified into four major categories: ABF2/ABF4/ABI5 (SrbZIP51/SrbZIP38/SrbZIP7), involved in phy- tohormone signaling, GBF1/GBF3/GBF4 (SrbZIP29/SrbZIP63/SrbZIP60) involved in environmental signaling, AREB3 (SrbZIP88), PAN (SrbZIP12), TGA1 (SrbZIP69), TGA4 (SrbZIP82), TGA7 (SrbZIP31), TGA9 (SrbZIP95), TGA10 (SrbZIP79) and HY5 (SrbZIP96) involved in cryptochrome signaling, and FD (SrbZIP23, SrbZIP24, SrbZIP47, SrbZIP67, SrbZIP68, SrbZIP71, SrbZIP72) promoted flowering. The transcriptomic data showed that SrbZIP genes differentially expressed in six S. rebaudiana cultivars (‘023’, ‘110’, ‘1188’, ‘11-14’, ‘GP’ and ‘GX’). Moreover, the expression levels of selected 15 SrbZIP genes in response to light, abiotic stress (low temperature, salt and drought), phytohormones (methyl jasmonate, gibberellic acid and salicylic acid) treatment and in different tissues were analyzed utilizing qRT-PCR. Six SrbZIP (SrbZIP54, SrbZIP63, SrbZIP32, SrbZIP45, SrbZIP60 and SrbZIP9) genes were further identified to be highly induced by factors affecting glycoside synthesis. Among them, three SrbZIP genes (SrbZIP54, SrbZIP63 and SrbZIP32) were predicted to be related to stress-responsive terpenoid synthesis in S. rebaudiana. The protein-protein interaction network expanded the potential functions of SrbZIP genes. This study firstly provided the comprehensive genome-wide report of the SrbZIP gene family, laying a foundation for further research on evolution, function and regulatory role of bZIP gene family in terpenoid synthesis in S. rebaudiana.

Pearl millet (Pennisetum glaucum L.) is the second most important cereal grown in Eritrea after sorghum (Sorghum bicolor L.) grown under low input systems by small scale farmers. The crop utilizes soil moisture efficiently and has ability to tolerate soil toxicity and extreme temperatures than other cereals. It is a sustenance and food security crop important for its nutritive and cultural value and provides dietary energy and nutrition. However, despite the positive attributes and qualities of pearl millets for the present and future agriculture, production has been low. We attribute this to inadequate rainfall distribution, poor crop management by poorly resourced farmers, unavailability and high prices of farm inputs such as fertilizer and pesticides and low adoption of improved varieties by the farmers. This review outlines the constraints, interventions the government/ farmers have and can implement and the prospects of actions that can improve pearl millet production. As much as there have been efforts by the government and stakeholders to address these challenges and improve productivity of pearl millet, more needs to be done to meet the increasing demand of the increasing populations. This will enable farmers to intensify and diversify their agricultural systems and improve food security situation in the country. Unless a combined effort in soil fertility improvement, policies to promote use of modern varieties and conservation of and promotion of this crop biodiversity, the potential of this crop as famine and poverty alleviation among the rural poor will not be realized.

In recent years, many studies have reported that several distinct families of transcription factor (TF) genes play crucial roles in the response of plants to abiotic stress. Although some of these families got systematically studied in many species, little knowledge exists about these genes in oil palm (Elaeis guineensis Jacq.). In this study, 20 genes differentially expressed in the leaves of oil palm plants subjected to salinity or drought stress and encoding TFs belonging to four families of TFs - MYB, HD-ZIP, NF-Y, and HSFF - got selected for further characterization. The genes underwent a structural and functional annotation, besides having their RNA-Seq expression profile validated by the qPCR technique, and a correlation analysis of their response under both stresses got performed. The annotation analysis of the promoter region showed the presence of seven cis-acting elements, all already reported to be involved in plants' response to abiotic stress. The structural and functional characterization of the proteins encoded by the selected genes showed that some groups present patterns of conserved regions and are orthologs to genes already linked to salinity or drought resistance in other plant species. It was possible to confirm the RNA-Seq expression profile of 19 genes, only gene 4 showed the opposite response when using qPCR. Through correlation analysis, it was possible to observe a high level of similarity in the behavior of the 20 genes in response to drought or salinity stress, a behavior already reported in other species. The results presented here shed light on the role of 20 TFs in the leaves of young oil palm plants under severe levels of soil salinity or water deprivation. The high level of similarity in the molecular response to both stresses allowed the identification of genes that might grant strategies aiming to develop oil palm plants with a tolerance to both salinity and drought at once.

The microstructure of oil pipeline steels is polycrystalline due to the presence of a complex grain boundary (GB) network in them. The performance of them when exposed to stresses in corrosive environments is largely dictated by the interplay between the hydrogen (H) diffusion, the dislocation slip, and their interactions with the GBs. However, the slip-GB interaction in the presence of H and the subsequent cracking along the GBs remains not fully understood up to date. It is challenging to simultaneously resolve the collective dislocation motions away from the GBs together with the H diffusion near the atomically structured GBs using single-scale techniques. To address this challenge, taking bcc iron as a model material, here we present a a concurrent atomistic-continuum (CAC) computational analysis of the interaction between dislocation slip and a H-charged GB. With the large number of dislocations-mediated plastic flow away from the GB together with the atomistic structure evolution at the GB being simultaneously retained, several main findings from our simulations are: (i) the large number of dislocation-mediated pileup-induced internal stress nearby the H-charged GB can be as high as 3GPa; (ii) the more dislocations accumulated nearby the GB, the slower H diffusion ahead of the slip-GB intersection; (iii) H atoms diffuse fast behind the pileup tip, get trapped within the GB, and diffuse slow ahead of the pileup tip; (iv) the local stresses nearby the pileup tip exhibits a strong heterogeneity along the dislocation line direction. This differs from the common wisdom in many existing 2D theories/models. The buildup of such a high local stress heterogeneity leads to inhomogeneous H diffusion within the GB plane. The CAC simulation-predicted local H diffusivity, Dpileup−tip, and local stresses, σ, nearby the GB are then correlated with each other and consolidated into a mechanics model by considering the dislocation pileup as an Eshelby inclusion. These findings will provide researchers with opportunities to: (a) characterize the coupled dynamics between plasticity, H diffusion, and crack initiation underlying the hydrogen-induced cracking (HIC); (b) develop mechanism-based constitutive rules to be used in diffusion-plasticity coupling models for understanding the interplay between mechanical and mass transport in materials at the continuum level; and (c) connect the atomistic deformation physics of polycrystalline materials with their overall performance in aqueous environments, which is currently difficult to achieve in laboratory experiments.

Helicobacter pylori is a gastric pathogen that infects nearly half of the global population and is recognized as a group 1 carcinogen by the Word Health Organization. The global rise in antibiotic resistance has increased clinical challenges in treating H. pylori infections. Biofilm growth has been proposed to contribute to H. pylori’s chronic colonization of the host stomach, treatment failures, and the eventual development of gastric diseases. Several components of H. pylori have been identified to promote biofilm growth, and several of these may also facilitate antibiotic tolerance, including the extracellular matrix, outer membrane proteins, the coccoid morphology, modulated metabolism, efflux pumps, and virulence factors. Recent developments in therapeutic approaches targeting H. pylori biofilm have shown that synthetic compounds, such as small molecule drugs and plant-derived compounds, are effective at eradicating H. pylori biofilms. These combined topics highlight the necessity for biofilm-based research in H. pylori, to improve current H. pylori targeted therapeutic approaches and alleviate relative public health burden. In this review we discuss recent discoveries that have decoded the life cycle of H. pylori biofilms and current biofilm targeted treatment strategies.

The climate and its changes are major risk factors for agricultural activities because agricultural systems are highly affected by climatic factors such as temperature, rain, humidity, wind, and solar radiation. While some agricultural areas of the world are irrigated, the vast majority rely on natural rainfall patterns. Farmers will consume more water as a result of climate change and experience less water availability, resulting in a decrease in production capacity. As one of the most important natural phenomena affecting agricultural productivity, drought is a limiting environment for plant growth. The response of plants to water stress is complex and involves coordination between gene expression and its integration with hormones. It has been shown that bacteria have mechanisms to reduce water stress in these plant species and promote greater growth. The underlined mechanism involves root-to-shoot phenotypic changes in growth rate, architecture, hydraulic conductivity, water conservation, plant cell protection, and damage restoration through integrating phytohormones modulation, stress-induced enzymatic apparatus, and metabolites. This review demonstrates how plant growth-promoting bacteria can mitigate negative effects associated with water stress in plants and provide examples of technology conversion in agroecosystems.

Water deficit is one of the factors that most influence plant growth and yield. Thus, this study aimed to evaluate the effect of silicon and salicylic acid application and water deficit on the growth and photosynthetic and osmoregulatory metabolism of Talisia esculenta Radlk seedlings and their recovery potential after the resumption of irrigation. Six treatments were performed: irrigation, irrigation suspension, irrigation suspension + silicon at 0.5 g L−1, irrigation suspension + silicon at 1.0 g L−1, irrigation suspension + salicylic acid at 50 mg L−1, and irrigation suspension + salicylic acid at 100 mg L−1. The evaluations were carried out at the beginning of the experiment (T0), at 10 and 15 (DIS) days after irrigation suspension, when the seedlings showed a photosynthetic rate close to zero, and at recovery (REC). The plants were submitted to water restriction for up to 15 days, being then re-irrigated until the recovery point, which was monitored based on the photosynthetic rate. Silicon application attenuated the harmful effects of water deficit on gas exchange, initial fluorescence, promoted proline accumulation in the leaf and root, and provided higher seedling quality. Salicylic acid application contributed to the maintenance of the relative water content of leaves during the water deficit period. Silicon and salicylic acid applications can attenuate the harmful effects of water stress, with silicon being the most effective agent in maintaining its growth and metabolism.

Plant growth-promoting rhizobacteria (PGPR) are members of the plant rhizomicrobiome that enhance plant growth and stress resistance by increasing nutrient availability to the plant, producing phytohormones or other secondary metabolites, stimulating plant defense responses against abiotic stresses and pathogens, or fixing nitrogen. The use of PGPR to increase crop yield with minimal environmental impact is a sustainable and readily applicable replacement for a portion of chemical fertilizer and pesticides required for the growth of high-yielding varieties. Increased plant health and productivity have long been gained by applying PGPR as commercial inoculants to crops, although with uneven results. The establishment of plant-PGPR relationships requires the exchange of chemical signals and nutrients between the partners, and polyamines (PAs) are an important class of compounds that act as physiological effectors and signal molecules in plant-microbe interactions. In this review we focus on the role of PAs in interactions between PGPR and plants. We describe the basic ecology of PGPR and production and function of PAs in them and in the plants with which they interact. We examine the metabolism and the roles of PAs in PGPR and plants individually and during their interaction with one another. Lastly, we describe some directions for future research.

This paper investigates the effect of shot peening on the strength and corrosion properties of EN AW 6082-T651 aluminium alloy. Surface roughness, microhardness, residual stresses and corrosion performance were investigated and compared with the untreated aluminium alloy. Cracks and delaminations in the surface layer can only be seen on the treated specimens at a working pressure of 4 bar and 8 bar, while no such effect was observed at a working pressure of 1.6 bar. The effect of dislocation densification was confirmed by the microhardness measurement of the hardened layer, where microhardness increased by up to 23 % compared to the untreated aluminium alloy. Shot peening also results in a deeper layer with higher compressive residual stresses compared to untreated specimens. With higher working pressure, surface roughness increases, which can promote localized pitting corrosion. However, all treated specimens improve the corrosion resistance and have a lower degree of anodic dissolution. The current density of the shot peened specimen with the lowest surface roughness was more than twice lower than that of the untreated specimen.

Understanding maturation stress and wood properties of poplar tension wood are critical for improving lumber yields and utilization ratio. In this study, Released Longitudinal Maturation Strains (RLMS), anatomical features, physical and mechanical properties, and nano-mechanical properties of the cell wall were analyzed at different peripheral positions and heights in nine inclined, 12-year-old poplar (Populus×euramericana ‘Zhonglin46’) trees. The correlations between RLMS and wood properties were determined. The results showed that there were mixed effects of artificial inclination on wood quality and properties. The upper sides of inclined stems had higher RLMS, proportion of G-layer, bending modulus of elasticity, and elastic modulus of cell wall but lower microfibril angle than the lower sides. At heights between 0.7 m and 2.2 m, only the double wall thickness increased with height, RLMS and other wood properties such as fiber length and basic density fluctuated or changed little with height. RLMS was a good indicator of wood properties in the tension wood area and at heights between 0.7 m and 1.5 m. The results of this study present opportunities to identify and select better quality wood in poplar trees.

MicroRNAs (MiRNAs) are a class of non-coding single-stranded RNA molecules of approximately 20-24 nucleotides in plants that play an important regulatory role in a variety of biological processes such as plant growth and development and response to various abiotic stresses. For example Drought, Salt, Cold, High temperature, Heavy metals and Nutrition. MiRNAs affect gene expression by manipulating the cleavage, translational expression or DNA methylation of target mRNAs. This review describes the current progress made on the way miRNAs are produced and regulated and the way miRNA/target gene is used in plant responses to abiotic stresses. Studying the molecular mechanism of action of miRNAs downstream target genes can optimize the genetic manipulation of crop growth and development conditions that provide a more theoretical basis for improving crop production.

Plants have a natural protective process of altering their genetic molecules in response to changing environments. To uncover the genetic potential of plants, it is crucial to understand how they adapt to adverse conditions by analyzing their genetic molecules. In the study, we focused on understanding the responsive genes of tomatoes under drought conditions. We analyzed RNASeq data from different Tomato genotypes, tissue types, and different drought durations. We used a time series scale to identify early and late drought-responsive gene modules and applied a machine learning method to identify the best responsive genes. We found six candidate genes of Tomato (ASCT, FLA2, BAG5, DCL2b, NFP7.3, and ADC1) that were responsive to drought. We further constructed their protein-protein interaction network to identify their potential interactors and found them drought responsive proteins. The candidate genes can help to explore the adaptation of tomato plants under drought conditions. The identification of these candidate genes and modules can have far-reaching implications for molecular breeding and genome editing in Tomato, providing insights into the molecular mechanisms that underlie drought adaptation. This research underscores the importance of the genetic basis of plant adaptation, particularly in changing climates and growing populations.

Plant Cysteine Oxidase (PCO) is a plant O2-sensing enzyme of catalyzing oxidation of cysteine to Cys-sulfinic acid at the N-termini of target proteins. To better understand the Brassica napus PCO gene family, PCO genes in B. napus and related species were analyzed. In this study, 20, 7 and 8 PCO genes were identified in Brassica napus, Brassica rapa and Brassica oleracea, respectively. According to phylogenetic analysis, the PCOs were divided into five groups: PCO1, PCO2, PCO3, PCO4 and PCO5. Gene organization and motif distribution analysis suggested that PCO gene family was relatively conserved during evolution. Expression analysis showed that PCO genes were expressed in different tissues at different developmental stages. Interestingly, most of the Bna/Br/BoPCO5 members were expressed in leaves, roots, flowers, buds and siliques, suggesting an important role in both vegetative and reproductive development. Expression of BnaPCO was induced by various abiotic stress, especially waterlogging stress, which was consistent with the result of cis-element analysis. In this study, the PCO gene family of Brassicaceae was analyzed for the first time, which contributes to a comprehensive understanding of the origin and evolution of PCO genes in Brassicaceae and the function of BnaPCO in regulating plant responses to abiotic stresses.

Our understanding of the long-term consequences of chronic ionising radiation for living organisms remains scarce. Modern molecular biology techniques are helpful tools for researching pollutant effects on biota. To reveal the molecular phenotype of plants growing under chronic radiation exposure, we sampled Vicia cracca L. plants in the Chernobyl Exclusion Zone and in areas with normal radiation backgrounds. We performed a detailed analysis of soil and gene expression patterns, and made coordinated multi-omics analyses of plant samples, including transcriptomics, proteomics, and metabolomics. Chronic exposure to ionising radiation induced complex and multidirectional changes, including significant alterations in the metabolism and gene expression patterns of irradiated plants. We revealed profound changes in carbon metabolism, nitrogen reallocation, and photosynthesis. These plants were characterised by increased DNA damage, redox imbalance, and stress response reactions. The upregulation of histones, chaperones, peroxidases, and secondary metabolism were noted.

In the presence of aquatic plants in streams, a variety of flow structures have been reported. Re-sults of earlier investigations indicated that the hydrodynamic features of flows in rivers, and streams are influenced by a wide range of submerged and non-submerged vegetation. In the pre-sent study, eight experiment runs were conducted in two artificial pools built in a laboratory flume to assess the flow structures across vegetation cover. The slopes for entrance and exit sec-tions of these two pools are of 5 and 10 degrees, respectively. A patch of artificial grass covered the entire pool area over the gravel bed. The effect of stream flow velocity was investigated by considering two aspect ratios of 2 and 2.7. Also, distributions of flow velocity, Reynolds normal and shear stresses, turbulence intensities, turbulent kinetic energy (TKE), and higher-order mo-ments of velocity fluctuations have been investigated. By means of quadrant analysis, it is found that the skewness coefficients of velocity profiles are significant parameters to evaluate. Based on skewness values for the bursting processes, along the pool entrance section with a smaller slope, the contribution of sweep motion occurs in a more restricted zone above the canopy, and this im-plies that the ejection motion occurs in a pool entrance section with a higher slope. Immediately above the vegetation canopy, the dominant process is the sweep motion of bursting events. Whereas, at the upstream boundary of the vegetation patch, an outward motion with slightly pos-itive value occurs; and around the downstream boundary of the vegetation patch, the isotropic turbulence appears at the boundary of the vegetation and gravel bed. Over the vegetation canopy in the pool, less mixing eddies result in lower Reynolds shear stress values, and thus the turbulent flow becomes weak with lower turbulent kinetic energy (TKE). Because of the shallow flow in an artificial channel with an aspect ratio less than five and the availability of vertical non-zero ve-locity components, secondary currents become stronger in the channel. Consequently, there is a divergence from a linear dispersion of Reynolds shear stress.

This study investigates the stress corrosion cracking (SCC) behavior of type 316L stainless steel (SS316L) produced with sinter-based material extrusion additive manufacturing (AM). This technology has been shown to produce SS316L with microstructures and mechanical properties comparable to its wrought counterpart in the annealed condition. However, despite plenty of research on SCC of SS316L, little is known about SCC in sinter-based AM SS316L. This study focuses on the influence of sintered microstructures on susceptibility to SCC initiation and crack-branching. Custom-made C-rings were exposed to different stress levels in acidic chloride solutions at various temperatures. To better understand the SCC behavior of SS316L, solution-annealed (SA) and cold-drawn (CD) wrought SS316L were tested for comparison. Results showed that sinter-based AM SS316L was more susceptible to SCC initiation than SA wrought SS316L but more resistant than CD wrought SS316L. Moreover, sinter-based AM SS316L showed noticeably better resistance to crack-branching than both wrought SS316L counterparts. The investigation was supported by comprehensive pre- and post-test microanalysis using light optical microscopy (LOM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and micro-computed tomography (micro-CT)

Circular RNAs (circRNAs) served as covalently closed single-stranded RNAs have been proposed to influence plant development and stress resistance. Grapevine is the most economically valuable fruit crops cultivated worldwide and threaten by various abiotic stresses. Herein, we reported that a circRNA (Vv-circPTCD1) processed from the second exon of a pentatricopeptide repeat family gene PTCD1 was preferentially expressed in leaves and responded to salt and drought but not heat stress in grapevine. Additionally, the second exon sequence of PTCD1 was highly conserved but the biogenesis of Vv-circPTCD1 is species-dependent in plants. It was further found that the overexpressed Vv-circPTCD1 can slightly decreased abundance of the cognate host gene and the neighboring genes were barely affected in grapevine callus. Furthermore, we also successfully overexpressed the Vv-circPTCD1, and found that the Vv-circPTCD1 deteriorated the growth during heat, salt, and drought stresses in Arabidopsis. However, the biological effects on grapevine callus were not always consistent with that of Arabidopsis. Interestingly, we found that the transgenic plants of linear counterpart sequence also conferred the same phenotypes as that of circRNA during the three stress conditions, no matter what species. Those results imply that although the sequences are conserved, the biogenesis and functions of Vv-circPTCD1 are species-dependent. Our results indicate that the plant circRNA function investigation should be conducted in homologous species, which support valuable reference for further plant circRNA studies.

The use of plant growth-promoting bacteria can be one option for mitigating the impact of abiotic constraints on different cropping systems in the tropical semi-arid region. The aim of this study was to evaluate growth, leaf gas exchange and yield in maize inoculated with Bacillus aryabhattai, and subjected to water and salt stress. The experiment followed a randomised block design, in a split plot arrangement, with six repetitions. The plots comprised two levels of electrical conductivity for the irrigation water (ECw): 0.3 dS m-1 and 3.0 dS m-1; the subplots consisted of three irrigation depths (ID1: 50%, ID2: 75%, and ID3: 100% of the crop evapotranspiration (ETc)); while the sub-subplots included the presence or absence of Bacillus aryabhattai inoculant. A water deficit of 50% of the ETc resulted in the principal negative effects on growth, reducing the leaf area and stem diameter. The use of Bacillus aryabhattai mitigated salt stress and promoted better leaf gas exchange by increasing the CO2 assimilation rate, stomatal conductance, and internal CO2 concentration. However, irrigation with brackish water (3.0 dS m-1) reduced the instantaneous water use efficiency of the maize. Inoculation partially reduced the effects of abiotic stress due to morpho-physiological traits, and increased yield potential under water deficit with no salt stress.

Alfalfa (Medicago sativa L.) is the most cultivated forage legume around the world. Under a variety of growing conditions, forage yield in alfalfa is stymied by biotic and abiotic stresses including heat, salt, drought, and disease. Given the sessile nature of plants, they use strategies such as differential gene expression to respond to environmental cues. Transcription factors control the expression of genes that contribute to or enable tolerance and survival during periods of stress. Basic-leucine zipper (bZIP) transcription factors have been demonstrated to play a critical role in regulating plant growth and development as well as mediate the responses to abiotic stress in several species, including Arabidopsis thaliana, Oryza sativa, Lotus japonicus, and Medicago truncatula. However, there is little information about bZIP transcription factors in cultivated alfalfa. In the present study, 237 bZIP genes were identified in alfalfa from publicly available sequencing data. Multiple sequence alignments showed the presence of intact bZIP motifs in the identified sequences. Based on previous phylogenetic analyses in Arabidopsis thaliana, alfalfa bZIPs were similarly divided and fell into 10 groups. The physicochemical properties, motif analysis, and phylogenetic study of the alfalfa bZIPs revealed high specificity within groups. The differential expression of alfalfa bZIPs in a suite of tissues indicates that particular bZIP genes are specifically expressed at different developmental stages in alfalfa. Similarly, expression analysis in response to ABA, cold, drought, and salt stresses, indicates that a subset of bZIP genes are also differentially expressed and likely play a role in abiotic stress signaling and/or tolerance. These expression patterns were further verified by qRT-PCR. However, further functional characterization of bZIP transcription factors in alfalfa will help illuminate the role they play in stress tolerance mechanisms in legumes and facilitate the molecular breeding of stress tolerance in alfalfa.

Carotenoids are essential pigments that play a vital role in the photosynthetic process of algae and are important for human health and nutrition. Despite their potential value, algal carotenoids are being neglected by biofuel industries. Recent research is aimed at producing microalgal lipids and carotenoids simultaneously under abiotic stresses. In this study, the effect of different abiotic stress factors such as Nitrogen (N), Potassium (K), Phosphorous (P), Sulphur (S), light intensity, and photoperiod on biomass, lipid, and carotenoids synthesis in Monoraphidium sp. (MP) were explored utilizing a statistical method. In addition, 2, 7-dichlorofluorescein diacetate (DCF-DA) mediated spectrofluorimetry was employed to detect the ele-vation in ROS level. The results revealed that variations in nutrients and light con-ditions are the key factors in the up-regulation of biomolecules lipids and carote-noids in the algae. The carotenoids profiling was done by Ultra Performance Liquid Chromatography Quadrupole Time-of-Flight Mass Spectroscopy (UPLC-Q-ToF-MS). Among consisting carotenoids violaxanthin, astaxanthin, and beta-carotene were enhanced by 1.3 folds, 1.19 folds, 1.08 folds, while lutein was declined by 1.32 folds under stressed condition compared to control. The identified carotenoids are rec-ognized for their importance in the pharmaceutical and nutraceutical industries, highlighting the significant role of MP in these sectors.

Coastal lagoons are dynamic transitional water ecosystems hosting valuable biological communities, including rich and diverse macrophyte assemblages. Aquatic macrophytes must cope with large fluctuations of environmental conditions on a spatial and seasonal scale. Salinity is one of the most variable parameters, changing from nearly freshwater to hypersalinity, and it is known to have a strong influence on the composition and structure of macrophyte assemblages. This study is focused on the effect of salinity on macrophyte communities of the eight most important coastal lagoons of Apulia (south-eastern Mediterranean Sea). A set of eleven transitional water body types (sensu Water Framework Directive) were allocated in a range of meso- to hyperhaline lagoons. Macrophyte sampling was carried out between 2011 and 2019 and a total of 324 samples (18 sampling stations x 2 seasons x 9 years) was analyzed. Then, macrophyte occurrence in each transitional water body (T-WB) was expressed as frequency values (%) and assemblages were compared to assess any similarity in relation to four salinity classes (mesohaline, polyhaline, euhaline, hyperhaline). Species richness varied according to the salinity class, being much higher in polyhaline and euhaline T-WBs and strongly decreasing at the extremes of salinity range (mesohaline and hyperhaline T-WBs). Moreover, statistical analysis showed a high resemblance of macrophyte assemblages of T-WBs within the same salinity class, which shared a great number of species. Four distinct macrophyte communities were distinguished, reflecting the salinity conditions of different T-WB types and confirming the effectiveness of a lagoon typology based on this descriptor.

This note makes available five years of data gathered in a measurement site equipped with a micrometeorological station and two monitoring wells. Series of data of hydrological and atmospheric variables allow to estimate the flux of water across the atmosphere-land interface and to calculate the water budget, that are crucial topics in climate and environmental sciences. The measures of water-table began during 2017, one of the driest year of the whole instrumental period of climate history for the Central Mediterranean. Data from the micrometeorological station have been used to construct two more datasets of daily and monthly cumulative values of different terms of the surface water budget, from which the groundwater infiltration has been estimated. A significant decreasing trend characterizes both the data time series of piezometric heights and estimated infiltration in the considered period. All the data are collected in 2017-2022 datasets that are available in the supplementary material.

LSUs (RESPONSE TO LOW SULFUR) are plant-specific proteins of unknown function that were initially identified during transcriptomic studies of the sulfur deficiency response in Arabidopsis. Recent functional studies have shown that LSUs are important hubs of protein interaction networks with potential roles in plant stress responses. In particular, LSU proteins have been reported to interact with members of the brassinosteroid, jasmonate signaling, and ethylene biosynthetic pathways, suggesting that LSUs may be involved in response to plant stress through modulation of phytohormones. Furthermore, in silico analysis of the promoter regions of LSU genes in Arabidopsis has revealed the presence of cis-regulatory elements that are potentially responsive to phytohormones such as ABA, auxin, and jasmonic acid, suggesting crosstalk between LSU proteins and phytohormones. In this review, we summarize current knowledge about the LSU gene family in plants and its potential role in phytohormone responses.

During the response of plants to adverse stresses, aquaporin (AQP) plays a prominent role in membrane water transport based on received upstream signals. In addition, they have various physical parts for dealing with environmental stresses. Due to the importance of the AQP gene family, studies have been conducted investigating the function and regulatory system of these genes. However, many of their molecular aspects are still unknown. This study aims to carry out a genomic-wide investigation of the AQP gene family in durum wheat using bioinformatics tools and to investigate the expression patterns of some members in response to salt stress. Our results showed that there are 80 TtAQP genes in durum wheat, which are classified into four main groups based on phylogenetic analysis. Many duplications were observed between the members of the TtAQP gene family, and high diversity in response to post-translational modifications was observed between TtAQP family members. The expression pattern of TtAQP genes disclosed that these genes are primarily upregulated in response to salt stress. Besides, qPCR data revealed that TtAQPs are more induced in delayed responses to salinity stress. Overall, our findings illustrate that TtAQP members are diverse in terms of their structure, regulatory systems and expression levels.

Due to an increase in the consumption of food, feed, and fuel and to meet global food security needs for the rapidly growing human population, there is a necessity to obtain high-yielding crops that can adapt to future climate changes. Currently, the main feed source used for ruminant livestock production is forage grasses. In temperate climate zones, perennial grasses grown for feed are widely distributed and tend to suffer under unfavorable environmental conditions. Gene editing has been shown to be an effective tool for the development of abiotic stress-resistant plants. The highly versatile CRISPR-Cas system enables increasingly complex modifications in genomes while maintaining precision and low off-target frequency mutations. In this review, we provide an overview of forage grass species that have been subjected to gene editing. We offer a perspective view on the generation of plants resilient to abiotic stresses. Due to the broad factors contributing to these stresses the review focuses on drought, salt, heat, and cold stresses. The application of new genomic techniques (e.g., CRISPR-Cas) allows addressing several challenges caused by climate change and abiotic stresses for developing forage grass cultivars with improved adaptation to the future climatic conditions. Gene editing will contribute towards developing safe and sustainable food systems.

This study assessed the periodic fluctuations among microbial biomass Carbon (C), Nitrogen (N) and Phosphorus (P), and the consequences of variations in altitude and abiotic factors on the soil microbial biomass (C, N and P) in a temperate mixed-oak pine forest of Central Himalaya. This research was directed at three forest stands along an altitudinal gradient. Samples were collected in triplicates, seasonally from each selected site and microbial C, N and P were determined through the fumigation extraction method. Microbial biomass C, N and P decreased significantly (P<0.01, correlation coefficient -0.985, -0.963, -0.948, respectively) with increasing altitude, while the rainy season showed the highest values, and winter season revealed the least values. Microbial biomass C, N and P showed positive correlation with silt particles, water holding capacity, bulk density, porosity, soil moisture, organic C, total N and P, and negative correlations with sand particles and soil pH. The microbial biomass C showed strong associations with soil microbial N (r=0.80, P<0.01) and P (r=0.89, P<0.01) contents, while the soil microbial biomass N and P also showed strong positive correlation (r=0.92, P< 0.01). Soil microbial biomass was greatly influenced by the altitude and abiotic variables whereas, weakly by temporal variation. The microbial C: N ratio indicated that fertility of soil is influenced by the species assemblage. Our findings suggest that high microbial biomass and low C: N ratio during rainy season could be considered as a strategy to conserve nutrients by temperate mixed-oak pine forest ecosystem.

Laser Powder Directed Energy Deposition (LP-DED) is an Additive Manufacturing process in which a laser beam is used to generate a melt pool onto a substrate. The additional material, in form of powder material, is fed into the generated melt pool and a raised track is obtained. The LP-DED process is very powerful for different applications such as the repair operations and the production of functionally graded material, however the application is still limited and one of the main reasons is related to the lack of knowledge in the physics of the process mechanisms. The process is influenced by a huge number of parameters and three main mechanisms can be identi-fied. These mechanisms are the powder flow, the generation of the molten pool and the solidifica-tion process and for each of these mechanisms the process parameters have a different relevance. In this paper, a review of the main mechanisms and the relationship between the process parame-ters and the outcome of each step of the process is presented.

Here I describe an overlooked form of non-biological paralife (i.e., near-life) that has been evolving on Earth for millions of years, and is currently in the final stages of transitioning into a new form of life. Any consideration of non-biological life or paralife is complicated by the fact that there is no consensus among biologists for the definition of life. This ambiguity has caused disagreement about whether subcellular reproduction systems like viruses are a form of life, despite having genomes, mutations, heritable phenotypes and system-improving evolution. To resolve this problem, I develop a definition of life that is entirely functional and independent of any of the structural idiosyncrasies of biological life on Earth: an order-generating system controlled by internally-encoded information that perpetuates itself by functioning to counteract its entropic decay. Using this definition, subcellular transposons, plasmids, and viruses are paralife because they match the definition of life in all ways except that they induce their order-generating functioning by a living host rather through their own self-sustaining production system. Using this functional definition of life, I show that utility- products (UPs) like fabricated hand tools are part of induced-reproduction systems that have features equivalent to biological genomes, mutations, heritable phenotypes, and a process of system-improving evolution. The perceived benefit of utility-products causes them to induce their reproduction by a biological life-form (humans). For these reasons, human utility products are functionally just as close to being a form of life as subcellular transposons, plasmids, and viruses, i.e., they are Utility-Product paralife (UP-parlife). I also show that some forms of UP-paralife are currently evolving into mechanical life that is capable of both self- sustaining reproduction and system-improving evolution without outside assistance. This transition requires the development of a high level of factory and/or UP automation and artificial intelligence (AI) that is capable of complex reasoning, imagination and creativity. Finally, I consider the influence of UP-life and UP-paralife on the development of the level of structural complexity in the universe, and I briefly speculate about how these non-biological forms of life and paralife will influence the expansion of scientific knowledge about the universe.

Sulfate transporters (SULTRs) are responsible for the uptake of the sulfate (SO42−) ions in the rhizosphere by the roots and their distribution in plant organs. In this study, SULTR family members in the genome of the two oilseed crops, Camelina sativa, and Brassica napus, were identified and characterized based on their sequence structure, duplication events, phylogenetic relationships, phosphorylation sites, and expression levels. Herein, 36 and 45 putative SULTR genes were recognized from the genome of C. sativa, and B. napus, respectively. SULTR proteins were predicted as basophilic proteins with low hydrophilicity in both studied species. According to phylogenetic relationships, we divided SULTRs into five groups, in which SULTRs 3 showed highest variation. Besides, several duplication events were observed between SULTRs. The first duplication event was predicted approximately five million years ago between three SULTRs 3.1 in C. sativa. Two subunits were indicated in the 3D structure of SULTRs that the active binding sites differed between C. sativa and B. napus. According to available RNA-seq data, SULTRs showed diverse expression in tissues and response to stimuli. SULTRs 3 showed an expression in all tissues. SULTRs 3.1 were more upregulated in response to abiotic stresses in C. sativa, while SULTRs 3.3, and SULTRs 2.1 showed an upregulation in B. napus. Furthermore, SULTRs 3 and SULTRs 4.1 showed an upregulation in response to biotic stresses in B. napus. Based on the distribution of cis-regulatory elements in the promoter region, we speculated that SULTRs might be controlled by phytohormones such as ABA, and MeJA. Therefore, it seems that SULTR genes in C. sativa have been more influenced by evolutionary processes and have acquired more diversity.

Background: Drought, N deficiency and herbivory are considered the most important stressors caused by climate change in the agro- and eco-systems and varied in space and time shaping a highly dynamic and heterogeneous stressful environments. This study aims to evaluate the to-mato morpho-physiological and metabolic responses to combined abiotic and herbivory at dif-ferent within-plant spatial levels and temporal scales. Methods: Leaf-level morphological, gas exchange traits and VOC profiles were measured in to-mato plants exposed to N deficiency and drought, T. absoluta larvae and their combination. Ad-ditive, synergistic or antagonistic effects of the single stress when combined were also evaluat-ed. Morpho-physiological traits and VOC profile were also measured on leaves located at three different positions along the shoot axes. Results: The combination of the abiotic and biotic stress has been more harmful than single stress with antagonistic and synergistic but non-additive effects for the morpho-physiological and VOC tomato responses, respectively. Combined stress also determined a high within-plant phenotypic plasticity of the morpho-physiological responses. Conclusions: These results suggest that the combined stress in tomato determined a “new stress state” and a higher within-plant phenotypic plasticity which could permit an efficient use of the growth and defence resources in the heterogeneous and multiple stressful environmental condi-tions.

Mimosa acutistipula is endemic to Brazil and grows in ferruginous outcrops (canga) in Serra dos Carajás, eastern Amazon, where one of the largest iron ore deposits in the world is located. Plants that develop in these ecosystems are subject to severe environmental conditions and must have adaptive mechanisms to grow and thrive in cangas. Mimosa acutistipula is a native species used to restore biodiversity in post-mining areas in canga. Understanding the molecular mechanisms involved in the adaptation of M. acutistipula in canga is essential to deduce the ability of native species to adapt to possible stressors in rehabilitating minelands over time. In this study, the root proteomic profiles of M. acutistipula grown in a native canga ecosystem and rehabilitating minelands were compared to identify essential proteins involved in the adaptation of this species in its native environment and that should enable its establishment in rehabilitating minelands. The results showed differentially abundant proteins, where 436 proteins with significant values (p < 0.05) and fold change ≥ 2 were more abundant in canga and 145 in roots from the rehabilitating minelands. Among them, a representative amount and diversity of proteins were related to responses to water deficit, heat, and responses to metal ions. Other identified proteins are involved in biocontrol activity against phytopathogens and symbiosis. This research provides insights into proteins involved in M. acutistipula responses to environmental stimuli, suggesting critical mechanisms to support the establishment of native canga plants in rehabilitating minelands over time.

Abiotic stresses, including drought, salinity, cold, heat, and heavy metals, extensively reduce global agricultural production. Approaches such as conventional breeding and transgenic breeding have been widely used to cope with these environmental stresses. The clustered regularly interspaced short palindromic repeat- Cas (CRISPR/Cas) based gene-editing tool has revolutionized due to its simplicity, accessibility, adaptability, flexibility, and wide applicability. This system has a great potential to build up crop varieties with enhanced tolerance against abiotic stresses. In this review, we summarize the most recent findings on understanding the mechanism of abiotic stress response in plants and the application of CRISPR/Cas mediated gene-editing system towards enhanced tolerance to drought, salinity, cold, heat, and heavy metals stresses. Furthermore, in this review, we highlighted the recent advancements in prime editing and base editing tools for crop improvement.

Transcription factors (TFs) are the regulatory proteins that act as molecular switches in controlling stress responsive gene expression. Among them MYB transcription factor family is one of the largest TF family in plants, playing a significant role in plant growth, development, phytohormone signaling and stress-responsive processes. Pearl millet (Pennisetum glaucum L.) is one of the most important C4 crop plant of the arid and semi-arid regions of Africa and South-east Asia for sustaining food and fodder productions. To explore the evolutionary mechanism and functional diversity of the MYB family in pearl millet, we conducted a comprehensive genome-wide survey and identified 279 MYB TFs (PgMYB) in pearl millet and distributed unevenly across seven chromosomes of pearl millet. Phylogenetic analysis of identified PgMYBs classified them into 18 subgroups and members of the same group showed a similar gene structure and conserved motif/s pattern. Further, duplication events were identified in pearl millet that indicated towards evolutionary progression and expansion of the MYB family. Transcriptome data and relative expression analysis by qRT-PCR identified differentially expressed candidate PgMYBs (PgMYB2, PgMYB9, PgMYB88 and PgMYB151) under dehydration, salinity, heat and phytohormones (ABA, SA and MeJA) treatment. Taken together, this study provides valuable information for a prospective functional characterization of MYB family members of pearl millet and genetic improvement of crop plants.

Climate change poses a serious threat to global agricultural activity and food production. To address this issue, plant genome editing technologies have been developed to provide an alternative solution for crop improvement. Unlike conventional breeding techniques (e.g., selective breeding and mutation breeding), modern genome editing tools offer more targeted and specific alterations of the plant genome to produce crops with desired traits, such as higher yield and/or stronger resilience to the changing environment. In this review, we discuss the current development and future applications of genome editing technologies in mitigating the impacts of biotic and abiotic stresses on agriculture. We focus specifically on the CRISPR/Cas system, which has been the center of attention in the last few years as a revolutionary genome-editing tool in various species. We also conducted a bibliographic analysis on CRISPR-related papers published from 2012 to 2021 (10 years) to identify trends and possible gaps in the CRISPR/Cas-related plant research. In addition, this review article outlines the current shortcomings and challenges of employing genome editing technologies in agriculture with notes on future prospective. We believe combining conventional and more innovative technologies in agriculture would be the key to optimizing crop improvement beyond the limitations of traditional agricultural practices.

Magnesium transporters (MGTs) play a prominent role in the absorption, transport and storage of magnesium in plant cells. In the present study, MGT gene family members were identified and characterized in two species of cucurbitaceae, including C. sativus and C. lanatus. 20, 19, and 20 MGT genes were recognized in C. lanatus, C. sativus, and C. melo, respectively. According to physicochemical properties, the members of each sub-class of MGTs in the species of cucurbitaceae showed the close relationship. Proteins from NIPA were identified as hydrophilic proteins with high stability. Based on phylogenetic analysis, MGT family members were classified into three groups, and NIPAs showed more diversity. Besides, duplication events were not identified between the MGT members in C. lanatus, and C. sativus. According to pocket analysis, residues such as L, V, S, I, and A were frequently observed in the binding sites of MGT proteins in both species. The prediction of post-translation modifications revealed that MSR2 proteins have high phosphorylation potential than other sub-classes in both studied plants. The expression profile of MGTs showed that MGTs are more expressed in root tissues. In addition, MGTs showed differential expression in response to abiotic/biotic stresses as well as hormone application and NIPAs were more induced in response to stimuli in watermelon. The results of this study, as the primary work of MGT gene family, can be used in programs related to cucurbitaceae breeding.

Lettuce is a salt-sensitive crop and has a threshold electrical conductivity of 1.3–2.0 mS cm-1 and above that is considered detrimental. As there has been very little information on the physio-logical response of different critical stages of lettuce under different salt stress (SS), the current study is focused on investigating the effects of SS on the critical physiological traits influencing the carbon assimilation in different growth stages of lettuce. The experiment was conducted in deep-water culture hydroponic system in a greenhouse condition. Four levels of sodium chloride salt treatments (EC: 20, 16, 8, and 1.8 mS cm-1) were applied. During both growth stages (day 11 (GS1) and day 19 (GS2) after salt treatment), the leaf transpiration rate, stomatal conductance, and intercellular CO2 were severely decreased. However, the carbon assimilation rate remained unchanged under SS. Similarly, the water use efficiency increased under the SS. It is concluded that the increasing SS increased stomatal and non-stomatal limiting factors during GS1 suggesting the enhanced limitation in photosynthetic activity while no such trend was observed during GS2. The decreased gm with increased SS at GS1 and GS2 suggested that SS induced the irreversible decrease of gm, which in turn can be responsible for the transient reduction in the Vcmax and Jmax during GS2. Taken together, the evidence from this research recommends that varying the SS levels can significantly affect the physiological performance of lettuce at both growth stages.

Melatonin (MEL), a ubiquitous indolamine, is a molecule whose regulatory role in plan metabolism has gained interest in the last decades. Likewise, nitric oxide (NO), a gasotransmitter, can also affect plant molecular pathways due to its function as a signalling molecule. Both MEL and NO can interact at multiple levels under abiotic stress, starting by their own biosynthetic pathways and inducing a particular signalling response in plants. This review summarizes the role of these molecules during plant development and fruit ripening, as well as their interactions. Due to the impact of climate change‐related abiotic stresses on agriculture, this review has also focused on their role in mediating abiotic stress tolerance and the mechanisms by which they operate, from upregulation of the whole antioxidant defence system to posttranductional modifications of important molecules. Their interactions and crosstalk with phytohormones and H2S is also discussed. Finally, we introduce NOmela, an emerging and very unknown molecule which seems to have a stronger potential than MEL and NO separately in mediating plant stress response.

Cladding is typically used to protect components from wear and corrosion while also improving the aesthetic value and reliability of the substrate. The cladding process induces significant residual stresses due to the temperature difference between the substrate and the clad layer. However, these residual stresses could be effectively utilized by modifying processes and geometrical parameters. This paper introduces a novel methodology for using the weld-cladding process as a cost-effective alternative to various existing reinforcement techniques. The numerical analyses are performed to maximize the reinforcement of a cylindrical tool. The investigation of how the weld cladding develops compressive stresses on the specimen in response to a change in the weld beads and the welding sequence is presented. For the benchmark shape, experimental verification of the numerical model is performed. The impact of the distance between the weld beads and the effect of the tool diameter is numerically investigated. Furthermore, the variation in compressive stresses due to temperature fluctuations during the extrusion process has been evaluated. The results showed that adequate compressive stresses are generated on the welded parts through the cladding process after cooling. Hence, the targeted reinforcement of the substrate can be achieved by optimizing the welding sequence and process parameters.

LSU (RESPONSE TO LOW SULFUR) proteins belong to a plant-specific gene family initially characterized by their strong induction in response to sulfate (S) deficiency. However, little is known about the LSU gene repertoire and evolution of this family in land plants. In this work, a total of 270 LSU family members were identified using 134 land plant species with whole genome sequence available. Phylogenetic analysis revealed that LSU genes belong to a Spermatophyta-specific gene family, and their homologs are distributed in three major groups, two for dicotyledons and one group for monocotyledons. Moreover, we analyzed the expression of LSU genes in one representative species of each phylogenetic group (wheat, tomato and Arabidopsis) and found a conserved response to S-deficiency, suggesting that these genes might play a key role in S stress responses. Accordingly, Arabidopsis lsu2 knockout mutant plants showed increased levels of internal sulfate content and lower levels of expression of different key genes involved in S deficiency and metabolism like SDI2 and APR3. In summary, our results indicate that LSU genes are evolutionarily conserved in angiosperms and that specific members of this family might play an important role regulation of S transport and assimilation.

Calculation of the pressure field on and around solid bodies exposed to external flow is of paramount importance to a number of engineering applications. However, conventional pressure measurement techniques are inherently linked to problems principally caused by their point-wise and/or intrusive nature. In the present paper, we attempt to calculate the time-averaged two-dimensional pressure field by integrating PIV (Particle Image Velocimetry) velocity measurements into a CFD code and modifying them by the respective correction step of the SIMPLE algorithm. Boundary conditions are applied from the PIV data as a three-layer area of constant velocities, adjacent to the boundaries. A novel characteristic of the approach is the straightforward inclusion of the Reynolds Stresses into the source terms of the momentum equations, calculated directly from the PIV statistics. The methodology is applied to three regions of the symmetry plane parallel to the main boundary layer flow past a surface mounted cube. In spite of findings of deviations from the planar 2D flow assumption, the derived pressure fields and the adjusted velocity fields are found to be reliable, while the intrinsic turbulent nature of the flow is considered without modelling of the Reynolds stresses.

This article discuss the estimation of electrical stresses input that is required to determine lifetime degradation of the HV cables installed within overhead transmission lines (OHTL’s). Abort from lightning effects, these electrical stresses are mainly generated due to repetitive switching operation of the transmission line that produces transient overvoltage (TOV) stress and high frequency stress. The transient overvoltage (TOV) due to switching-off the transmission line at the interface points between the cable and OHTL is estimated using artificial neural network (ANN). PSCAD software is used to build the transmission line model for 749 different case in order to build the required database for ANN training. Two different algorithm input to train ANN with one hidden layer and one output layer using different number of nodes are modeled in MATLAB. The results performance is continuously compared and evaluated till acceptable Regression is achieved to insure the error is less than +/-1.5%. The high frequency due to switching-on the transmission line is also recorded and analyzed. The results show that this new method is efficient, accurate and useful as there is no cable monitoring system is available for each HV cable installed within the transmission line.

Dioclea apurensis Kunth is native to ferruginous rocky outcrops (known as canga) in the eastern Amazon. Native cangas are considered hotspots of biological diversity and have one of the largest iron ore deposits in the world. There, D. apurensis can grow in post-mining areas where molecular mechanisms and rhizospheric interactions with soil microorganisms are expected to contribute to their establishment in rehabilitating minelands. In this study, we compare the root proteomic profile and rhizosphere-associated bacterial and fungal communities of D. apurensis growing in canga and a rehabilitating mineland to characterize the main mechanisms that allow the growth and establishment in post-mining areas. The results showed that proteins involved in response to oxidative stress, drought, excess of iron, and phosphorus deficiency were more accumulated in canga and, therefore, helped explain its high establishment rates in rehabilitating minelands. Rhizospheric selectivity of microorganisms was more evident in canga. The microbial community structure was mostly different between the two habitats, denoting that despite having its preferences, D. apurensis can associate with beneficial soil microorganisms without specificity. Therefore, its good performance in rehabilitating minelands can also be improved or attributed to its ability to cope with beneficial soil-borne microorganisms. Native plants with such adaptations must be used to enhance the rehabilitation process.

Although lithium-ion batteries have extensively been used in various applications because of their high energy capacity, fracture and failure, the by-products of large strains and stresses caused by fast charging and discharging need yet to be addressed. The size effects on the mechanical behavior of the nano-sized structures are significant; however, the classical elasticity theory may not consider such effects. On the other hand, surface stress theory, as a robust and potential theory, is suitable in considering size effects in nano-scale structures. Therefore, in this paper, in order to involve the surface stress effects on the fracture behavior of Li-ion batteries, the following steps are taken. Firstly, a phase-field model is used to determine the evolution of the concentration profile. Subsequently, the stress distribution is obtained by using the surface stress theory combined with chemical equations for a planar electrode. Afterward, by using the weight function method for an edge crack in the plate, the stress intensity factor is derived for all time steps and possible crack lengths during the process. It is found that with increasing phase boundary thickness parameter or decreasing phase-separation phenomenon, the surface mechanics parameters become more influential. Furthermore, in the presence of positive surface stress, the diffusion-induced stress distribution decreases, which in turn reduces the stress intensity factor. In addition, in this paper, the two states of surface stress are compared either for elastic or total strain. Concerning stresses and concentrations, the results indicate a big difference at the beginning of the deintercalation process showing, in particular, 2% for stresses, but the differences diminish gradually.

Zero-rate output (ZRO) drift induces deteriorated micro-electromechanical system (MEMS) gy-roscope performances, severely limiting its practical applications. Hence, it is vital to explore an effective method toward ZRO drift reduction. In this work, we conduct an elaborate investigation on the impacts of the internal and packaging stresses on the ZRO drift at the thermal start-up stage, and propose a temperature-induced stress release method to reduce the duration and magnitude of ZRO drift. Self-developed high-Q dual mass tuning fork gyroscopes (TFGs) are adopted to study the correlations between temperature, frequency and ZRO drift. Furthermore, a rigorous finite element simulation model is built based on the actual device and packaging structure, revealing the temperature and stresses distribution inside TFGs. Meanwhile, the relationship between temperature and stresses are deeply explored. Moreover, we introduce a temperature-induced stress release process to generate thermal stresses and reduce the temperature-related device sensitivity. By this way, the ZRO drift duration is drastically reduced from ~2000 s to ~890 s, and the drift magnitude decreases from ~0.4 °/s to ~0.23 °/s. This stress release method achieves a small bias instability (BI) of 7.903 °/h and a low angle random walk (ARW) of 0.792 °/√h, and the long-term bias performance is significantly improved.

Farmers and seed companies constantly require high-quality seeds with excellent agronomic performance. However, faced with environmental adversity, limited natural resources and increasing food demand around the globe, more attention has turned to improving crop plant production by implementing efficient strategies. Seed priming technology has shown promising biological improvements leading to suitable agronomic performance in crop plants under adverse environmental conditions. Seeds are subjected to controlled conditions that are conducive to complex physiological, biochemical, and molecular changes, conferring specific stress tolerance to subsequent germination and growth conditions. In this review paper, we aimed to study the recent approaches in the efficiency of hydropriming, osmopriming, chemopriming, hormopriming, nanopriming, matrix priming, biopriming, physical priming and hybrid priming procedures in the production of crop plants under environmental adversity, as well as their biological mechanism changes. All priming methods demonstrated relevant changes in the biological mechanism related to crop plant production by mitigating salinity effects, heavy metals, and flooding stress and enhancing chilling, heat, drought and phytopathogen tolerance. We strongly recommend that researchers combine multiple priming methods, known as hybrid priming, in their investigations to provide novel technologies and additional biological approaches to enhance the knowledge of crop plant science. Thus, the findings shed light on the use of seed priming technology as a key strategy to increase crop plant production under environmental adversity by acquiring stress tolerance and enhancing agronomic traits to meet the global food demand.

Heat shock transcription factors (HSFs) participate in regulating many environmental stress responses and biological processes in plants. Maize (Zea mays L.) is a major cash crop that is grown worldwide. However, the growth and yield of maize are affected by several adverse environmental inputs. Therefore, investigating the factors that regulate maize growth and development and resistance to abiotic stress is an essential task for developing stress-resilient maize varieties. Thus, a comprehensive genome-wide identification analysis was performed to identify HSFs in the maize genome. The current study identified 25 ZmHSFs, randomly distributed throughout the maize genome. Phylogenetic analysis revealed that ZmHSFs are divided into three classes and 13 sub-classes. Gene structure and protein motif analysis supported the results obtained through the phylogenetic analysis. Domain analysis showed the DNA-binding domain to be the most conserved region of ZmHSFs. Segmental duplication is shown to be responsible for the expansion of ZmHSFs. Most of the ZmHSFs are localized inside the nucleus, and the ZmHSFs which belong to the same group show similar physio-chemical properties. The 3D structures revealed comparable conserved ZmHSFs protein structures. RNA-seq analysis revealed a major role of class A HSFs including, ZmHSFA-1a and ZmHSFA-2a in all the maize growth stages, i.e., seed, vegetative, and reproductive development. Furthermore, ZmHSFs displayed an obvious spatiotemporal expression. Under abiotic stress conditions (heat, drought, cold, UV, and salinity), members of class A and B ZmHSFs are induced. Gene ontology (GO) annotation analysis indicated a major role of ZmHSFs in resistance to environmental stress and regulation of primary metabolism. Further, the protein-protein interaction analysis showed that ZmHSFs interact with several molecular chaperons and major stress-responsive proteins. To summarize, this study provides novel insights for functional studies on the ZmHSFs in maize breeding programs.

Membrane transporters (MTs) are mainly localized at the plasma membrane (PM), tonoplast and vacuolar membrane (VM) of cells in all plant organs. Their work is to maintain the cellular homeostasis by controlling ionic movements across PM channels from roots to upper plant parts, xylem loading and remobilization of sugar molecules from photosynthesis tissues in the leaf (source) to roots, stem and seeds (sink) via phloem loading. The plant’s whole source-to-sink relationship is regulated by multiple transporting proteins in a highly sophisticated manner and driven based on different stages of plant growth and development (PG&D), and environmental changes. The MTs play a pivotal role in PG&D in terms of increased plant height, branches/tiller numbers, enhanced numbers, length and filled panicles per plant, seed yield and grain quality. Dynamic climatic changes disturbed the ionic balance (salt, drought and heavy metals) and sugar supply (cold and heat stress). Due to poor selectivity, some of the MTs also uptake toxic elements in the roots that negatively impact on PG&D, later on also exported to upper parts and then deteriorate the grain quality. As an adaptive strategy, in response to salt and HMs plants activated PM and VM localized MTs that export toxic elements into vacuole, and also translocate in the root’s tips and shoot. However, in case of drought, cold and heat stresses, MTs increased the water and sugar supply to all organs. In this review, we mainly reviewed recent literature from Arabidopsis, halophytes, and major field crops such as rice, wheat, maize and oilseed rape to argue on the global role of MTs in PG&D and abiotic stress tolerance. We also discussed the gene expression level changes and genomic variations within a species as well as within a family in response to developmental and environmental cues.

The work presents the results of numerical fatigue analysis of a turbine engine compressor blade, taking into account the values of initial stresses resulting from surface treatment - shot-peening. The values of the residual stresses were estimated experimentally using X-ray diffraction. The paper specifies the values of the residual stresses on both sides of the blade and their reduction due to the cutting through the blade - relaxation. The obtained values of the residual stresses were used as initial stresses in the numerical fatigue analysis of the damaged compressor blade, which is subjected to resonant vibrations of known amplitude. Numerical fatigue ε-N life analysis was based on the several fatigue material models: Manson’s, Mitchell’s, Baumel-Seeger’s, Muralidharan-Manson’s, Ong’s, Roessle-Fatemi’s and Median’s, and also on the three models of cyclic hardening: Manson’s, Xianxin’s, and Fatemi’s. Because of this approach, it was possible to determine the relationship between the selection of the fatigue material ε-N model and the cyclic hardening model on the results of the numerical fatigue analysis. Additionally, the calculated results were compared with the results of experimental research, which allowed for a substantive evaluation of the obtained results. These results are of great scientific and practical importance. The problem of determining the fatigue life of blades with defects operating under resonance vibrations is one of the original tasks in the field of fracture mechanics and experimental mechanics. The results obtained are of great importance in the aviation industry and can be used during engine maintenance and inspections to assess the suitability of blades with defects in terms of the needs of further work. This aspect of engineering maintenance is of great importance from the aircraft safety point of view.

The SnRK gene family is a key regulator playing an important role in plant stress response by phosphorylating the target protein to regulate the signalling pathways. The function of SnRK gene family has been reported in many species but is limited to Triticum asetivum. In this study, SnRK gene family in the wheat genome was identified and its structural characteristics were described. One hundred forty-seven SnRK genes distributed across 21 chromosomes were identified in the Triticum aestivum genome and categorised into three subgroups (SnRK1/2/3) based on phylogenetic analyses and domain types. The gene intron-exon structure and protein-motif composition of SnRKs were similar within each subgroup but different amongst the groups. Gene duplication between the wheat, Arabidopsis, rice and barley genomes was also investigated in order to get insight into the evolutionary aspects of the TaSnRK family genes. SnRK genes showed differential expression patterns in leaves, roots, spike, and grains. Redundant stress-related cis-elements were also found in the promoters of 129 SnRK genes and their expression levels varied widely following drought, ABA and light regulated elements. In particular, TaSnRK2.11 had higher and increased expression under the abiotic stresses and can be a candidate gene for the abiotc stress tolerance. The findings will aid in the functional characterization of TaSnRK genes for further research.

Cacao is an understory plant cultivated under full-sun monocultures to multi-strata agroforestry systems, where cocoa trees are planted together with fruit, timber, firewood, and leguminous trees, or grown within thinned native forests. Under agroforestry systems of cultivation, cacao is subjected to excess shade due to high density of shade trees, and overgrown or unmanaged pruning of shade trees. Cacao is tolerant to shade, and the maximum photosynthetic rate occurs around irradiance of 400 μmol m⁻² s⁻¹ but excess shade reduces the irradiance further which is detrimental to photosynthesis and growth functions. Intra-specific variation is known to exist in cacao for the required saturation irradiance. A greenhouse study was implemented with 58 cacao genotypes selected from four geographically diverse groups: (i) wild cacao from river basins of the Peruvian Amazon, (PWC), (ii) Peruvian farmers’ collection (PFC), (iii) Brazilian cacao collection (BCC) and (iv) national and international cacao collections (NIC). All the cacao genotypes were subjected to 50% and 80% shade where photosynthetic photon flux density (PPFD) was 1000 and 400 μmol m^-2 ּs^-1 respectively. Intra-specific variations were observed for growth, physiological and nutritional traits, and tolerance to shade. Cacao genotypes tolerant to shade were: UNG-77 and UGU-130 from PWC; ICT-2173, ICT-2142, ICT-2172, ICT-1506, ICT-1087, and ICT-2171 from the PFC; PH-21, CA-14, PH-990 and PH-144 from BCC; and ICS-1, ICS-39, UF-613 and POUND-12 from NIC. Genotypes that tolerate excess shade might be useful plant types to maintain productivity and sustainability in agroforestry systems of cacao management.

Environmental genetics-related modern methods are shown as important indicators of various cyanotoxins syntheses, and their knowledge and use are critically analyzed. Microcystins and other cyanotoxins loads and syntheses are related to different drivers, like various chemical elements and compounds (especially nutrients, such as nitrogen and phosphorus, and their ratio), then to the light, conductivity, temperature, and other climatical and hydrological factors, to which spatial and geographical features (such as the surface of the water bodies) have to be added. The biotic relationships include different specific and supraspecific, uni- and bilateral links between the cyanobacteria, and subsequently their synthesized toxins, and protozoans (or protoctists), chromists, macrophytes, different systematical and ecological groups of zooplankton, and others. The importance of, but also the gaps in, the knowledge and the scarcity of studies involving ectocrines mediated interactions between different groups of algae and plants are highlighted. The paper ends with an interesting classification of lakes' trophicity, illustrated with conceptual diagrams, based on possible scenarios of cyanobacteria behavior.

Lysine is the first limiting essential amino acid in rice because it is present in the lowest quantity compared to all the other amino acids. Amino acids are the building block of proteins and play an essential role in maintaining the human body’s healthy functioning. Rice is a staple food for large proportion of the global population, thus increasing the lysine content in rice will improve its nutritional value. In this paper, we studied the lysine biosynthesis pathway in rice (Oryza Sativa) to identify the regulators of the lysine reporter gene LYSA (LOC_Os02g24354). Genetically intervening at the regulators has the potential to increase the overall lysine content in rice. We modeled the lysine biosynthesis pathway in rice seedlings under normal and saline (NaCl) stress conditions using Bayesian networks. We estimated the model parameters using experimental data and identified the gene DAPF(LOC_Os12g37960) as a positive regulator of the lysine reporter gene LYSA under both normal and saline stress conditions. Based on this analysis, we conclude that the gene DAPF is a potent candidate for genetic intervention. Upregulating DAPF using methods such as CRISPR-Cas9 has the potential to upregulate the lysine reporter gene LYSA and increase the overall lysine content in rice.

Leaf mechanical wounding triggers a rapid, within minutes, release of a blend of volatile organic compounds (VOCs). Wounding-induced VOC blend is mainly composed of oxygenated ubiquitous stress volatiles such as methanol and volatile products of lipoxygenase (LOX) pathway (mainly C5 and C6 alcohols and aldehydes and their derivatives), but also includes multiple minor VOCs that collectively act as infochemicals inducing defences in non-damaged plant leaves, neighbouring plants and attracting herbivore enemies. Till present, interspecific variability of the rate of induction and magnitude of wounding-induced emissions, and the extent to which plant structural traits and physiological activity alter these emissions are poorly known. Particularly scarce is the information of the induced emissions in tropical agricultural plant species despite their economic importance and large area of cultivation at regional to global scales. We chose five tropical crops with varying photosynthetic activity and leaf structural characteristics: Abelmoschus esculentus, Amaranthus cruentus, Amaranthus hybridus, Solanum aethiopicum and Telfairia occidentalis to characterize the kinetics and magnitude of wounding-induced emissions, hypothesizing that the induced emission response is greater and faster in physiologically more active species with greater photosynthetic activity than in less active species. Rapid highly repeatable leaf wounds (12-mm cuts) were generated by a within-leaf-chamber cutting knife. Wounding-induced VOC emissions were measured continuously with a proton-transfer reaction time-of-flight mass spectrometer and gas-chromatography mass spectrometry was used to separate isomers. Twenty-three ion VOCs and twelve terpenoid molecule structures were identified, whereas ubiquitous stress volatiles methanol (on average 40% of total emissions), hexenal (24%), and acetaldehyde (11%) were the main compounds across the species. Emissions of low-weight oxygenated compounds (LOC, 70% of total), and LOX products (29%) were positively correlated across species, but minor VOC components, monoterpenoids and benzenoids were negatively correlated with LOC and LOX, indicating a reverse relationship between signal specificity and strength. There was a large interspecific variability in the rate of induction and emission magnitude, but the hypothesis of a stronger emission response in physiologically more active species was only partly supported. In addition, the overall emission levels were somewhat lower with different emission blend compared to the data reported for wild species, as well as different shares for the VOCs in the blend. The study demonstrates that wounding-dependent emissions from tropical agricultural crops can significantly contribute to atmospheric volatiles, and these emissions cannot be predicted based on current evidence of wild plant model systems.

Responses to water stress were measured for sugar maple (Acer saccharum subsp. saccharum Marshall) sources from Oklahoma (Caddo sugar maple), Missouri, Tennessee, Ontario and a black maple (Acer saccharum subsp. nigrum F. Michx.) source from Iowa. Seedling sources were selected for differences in temperature and precipitation of their geographic origins. Seedlings were preconditioned through moist (watered daily) or dry (watered every 4-7 days) cycles and then exposed to prolonged water stress. Dry preconditioned sugar maple seedlings from Oklahoma, Missouri, and Tennessee, sources from warmer and/or drier climates with greater relative evapotranspiration potentials, declined less rapidly in net photosynthesis, stomatal conductance, and water use efficiency (WUE) as water stress increased than dry preconditioned seedlings from Ontario and Iowa having origins in cooler, moister climates. Under imposed water stress the Ontario and Iowa sourced seedlings increased their root to shoot ratios and decreased their specific leaf area, mechanisms for drought avoidance. However, no corresponding changes in these values occurred for Oklahoma, Missouri, and Tennessee sources. Results from this study suggest greater tolerance of water stress in the Oklahoma, Missouri and Tennessee ecotypes from the western and southern range of sugar maple resulted primarily with WUE rather than other water stress coping mechanisms.

This review presents a comprehensive and systematic study of the field of bacterial plant biostimulants and considers the fundamental and innovative principles underlying this technology. Plant biostimulants are an important tool for modern agriculture as part of an integrated crop management (ICM) system; helping make agriculture more sustainable and resilient. Plant biostimulants contain substance(s) and/or microorganisms whose function when applied to plants or the rhizosphere, is to stimulate natural processes to enhance plant nutrient uptake, nutrient use efficiency, tolerance to abiotic stress, biocontrol, and crop quality. The use of plant biostimulants has gained substantial and significant heed worldwide as an environment-friendly alternative for sustainable agricultural production. Presently, there is an increasing curiosity of industry and researchers in microbial biostimulants especially, bacterial plant biostimulants (BPBs) to improve crop growth and productivity. The BPBs that are based on PGPR (plant growth-promoting rhizobacteria) play plausible roles to promote/stimulate the crop plant growth through several mechanisms that include, i) nutrient acquisition by nitrogen (N₂) fixation and solubilization of insoluble minerals (P, K, Zn), organic acids and siderophores, ii) antimicrobial metabolites and various lytic enzymes, iii) action of growth regulators and stress-responsive/induced phytohormones, iv) ameliorating abiotic stress like drought, high soil salinity, extreme temperatures, oxidative stress, and heavy metals by using different modes of action, and v) plant defense induction modes. Presenting here is a brief review emphasizing the applicability of BPBs as an innovative exertion to fulfill the current food crisis.

The GAI‐RGA ‐ and ‐SCR (GRAS) proteins belong to the plant-specific transcription factor gene family and involved in several developmental processes, phytohormone and phytochrome signaling, symbiosis, stress responses etc. GRAS proteins have a conserved GRAS domain at C-terminal and hypervariable N-terminal. The C-terminal conserved domain directly affects the function of the GRAS proteins. For instance, in Arabidopsis, mutations in this domain in Slender rice 1 (SLR1) and Repressor of GA (RGA) proteins cause significant phenotypic changes. GRAS proteins have been reported in more than 30 plant species and till now it has been divided into 17 subfamilies. This review highlighted GRAS protein's importance during several biological processes in plants, structural features of GRAS proteins, their expansion and diversification in the plants, GRAS-interacting proteins complexes and their role in biological processes. We also summarized available recent research that utilized CRISPR-Cas9 technology to manipulate GRAS genes in a plant for different traits. Further, the exploitation of GRAS genes in crop improvement programs has also been discussed

To date, soil salinity becomes a huge obstacle for food production worldwide since salt stress in plants is one of the major factors limiting agricultural productivity. It is estimated that a significant loss of crops (20%–50%) would be due to drought and salinity. To embark upon this harsh situation, numerous strategies such as plant breeding, plant genetic engineering, and a large variety of agricultural practices including the applications of plant growth-promoting rhizobacteria (PGPR) and seed biopriming technique have been developed to improve plant defense system against salt stress, resulting in higher crop yields to meet human’s increasing food demand in the future. In the present review, we update and discuss the advantageous roles of beneficial PGPR as green bioinoculants in mitigating the burden of high saline conditions on morphological parameters and on physio-biochemical attributes of plant crops via diverse mechanisms. In addition, the applications of PGPR as a useful tool in seed biopriming technique are also updated and discussed since this approach exhibits promising potentials in improving seed vigor, rapid seed germination, and seedling growth uniformity, Furthermore, the controversial findings regarding the fluctuation of antioxidants and osmolytes in PGPR-treated plants are also pointed out and discussed.

Strawberry is a saline sensitive plant adversely affected under slightly or moderately saline conditions. Growth and biochemical parameters of strawberry plants grown under NaCl (0-, 30-, 60-, and 90 mmol L-1) conditions with or without a halophytic companion plant (Portulaca oleracea L.) were investigated in a pot experiment. Salt stress negatively affected the growth, physiological (stomatal conductance, electrolyte leakage, total soluble solids) and biochemical parameters such as chlorophyll contents (chl-a and chl-b), proline, hydrogen peroxide, malondialdehyde, catalase, and peroxidase enzyme activities, lycopene, vitamin C contents along with the mineral uptake of strawberry plants. The companionship of P. oleacea increased fresh weight, dry weight, and fruit average weight and total fruit yield of strawberry plants along with the improvement of physiological and biochemical parameters. This study showed that cultivating of P. oleracea with strawberry plants under salt stress conditions effectively increased strawberry fruit yield and quality. We, therefore, that approaches towards the use of P. oleracea could be an environmentally friendly method that should be commonly practised where salinity is of great concern.

Plant diseases cause losses of approximately 16% globally. Thus, management measures must be implemented to mitigate losses and guarantee food production. In addition to traditional management measures, resistance induction and biological control have gained ground in agriculture due to their enormous potential. Endophytic fungi colonize plant tissues internally and have the potential to act as biological control agents, as elicitors in the process of resistance induction and in attenuating abiotic stresses. In this review, we list the action of this group of microorganisms as potential agents which can act in controlling plant diseases and describe several examples in which endophytes were able to reduce the damage caused by pathogens and adverse conditions. This is due to their arsenal of molecules generated during the interaction by which they form a kind of biological shield in the plant. Studies on these microorganisms have grown due to the existing diversity and the multiple benefits they can offer. Finally, considering that endophytic fungi can be an important tool in managing diseases due to the large amount of biologically active substances produced, bioprospecting this class of microorganisms is tending to increase and generate valuable products.

Water deficit caused by drought is a significant threat to crop growth and production. Nitric oxide (NO), a water- and lipid-soluble free radical, plays an important role in cytoprotection. Apart from a few studies supporting the role of NO in drought responses, little is known about this pivotal molecular amendment in the regulation of abiotic stress signaling. In this review, we highlight the knowledge gaps in NO roles under drought stress and the technical challenges underlying NO detection and measurements, and we provide recommendations regarding potential avenues for future investigation. The modulation of NO production to alleviate abiotic stress disturbances in higher plants highlights the potential of genetic manipulation to influence NO metabolism as a tool with which plant fitness can be improved under adverse growth conditions.

Plants are continually exposed to multiple stresses, which co-occur in nature and the net effects are frequently more non-additive (i.e., synergistic or antagonistic) suggesting ‘unique’ responses respect to that of the individual stress. Further, plant stress responses are not uniforms showing a high spatial and temporal variability among and along the different organs. In this respect, the present work investigated the morphological responses of different root types (seminal, seminal lateral, primary, primary lateral) of maize plants exposed to single (drought and heat) and combined stress (drought + heat). Data were evaluated by a specific root image analysis system (WinRHIZO) and analyzed by uni- and multi-variate statistical analysis. The results indicated that primary root and their laterals were the types more sensitive to the single and combined stresses while the seminal laterals specifically responded to the combined only. Further, antagonistic and synergistic effects were observed for the specific traits in the primary and their laterals and in the seminal lateral roots in response to the combined stress. These results suggested that maize root system modified specific root types and traits to face with different stressful environmental conditions highlighting that the adaptation strategy to the combined stress may be different from that of the individual ones. The knowledge of “unique or shared” responses of plant to multiple stress can be utilized to develop varieties with broad spectrum stress tolerance.

Recent developments in the cryopreservation space has increased the trend in germplasm collections established through cryopreserved in vitro material. Cryopreservation of recalcitrant seeds through embryos and embryonic axes, is not uncommon. Tropical and sub-tropical plants are not acclimated to the cold season, therefore have no in-built natural resilience to the cold. Also, larger seeds from trees, such as avocado (Persea americana Mill.), mango (Mangifera indica) and durian (Durio zibethinus L.) are sensitive to desiccation, chilling and freezing stress, making them unsuitable for seed banking or cryopreservation. Alternatively, as seeds do not carry the same genetic make-up as the mother plant, especially in the context of woody rainforest species of which the cross-pollination is dominant; seed conservation does not serve the purpose of germplasm preservation. Other plant material and methods are needed for these plants to be successfully stored in liquid nitrogen (LN). One such method commonly used is shoot-tip cryopreservation which ensures the clonal fidelity of germplasm. There are many problems when using shoot tips of tropical recalcitrant-seeded species. These include: 1) the toxic effects of cryoprotective agents towards structural integrity; 2) optimum developmental stage for success and 3) oxidative stress associated with excision injury leading to necrosis triggering cell death and hindering regeneration for the shoot tips in culture. A pre-requisite for any cryopreservation system is the availability of an established tissue culture regeneration platform. This review will outline conservation strategies for avocado with special emphasis on attempts and improvements made in the cryopreservation space for storing this horticulturally important crop ‘avocado’ at ultra-low temperatures.

The transition from a dormant to a germinating seed represents a crucial developmental switch in the life cycle of a plant. Subsequent transition from a germinating seed to an autotrophic organism also requires a robust and multi-layered control. Seed germination and seedling growth are multistep processes, involving both internal and external signals, which lead to a fine-tuning control network.