Accurate traffic simulation models play a crucial role in developing intelligent transport systems that offer timely traffic information to users and efficient traffic management. However, calibrating these models to represent real-world traffic conditions accurately poses a significant challenge due to the dynamic nature of traffic flow and the limitations of traditional calibration methods. This article introduces a machine learning-based approach to calibrate macroscopic traffic simulation models using real-time traffic video stream data. By leveraging computer vision technologies to extract key traffic parameters from video streams, the approach demonstrated a notable improvement in aligning the generated data from the calibrated simulation model with car sensor data, achieving an average improvement of over 50% compared to the uncalibrated macroscopic model. Moreover, there was a substantial reduction in data drift for the machine learning model integrated into the virtual transport space using vehicle-to-everything technology, resulting in a more than fourfold decrease in the average absolute error of the model.

Hydrodynamic modeling and hazard mapping are essential tools for urban flood mitigation and spatial planning. Leveraging software like HEC-RAS (Hydrologic Engineering Center - River Analysis System) and ArcGIS, this study aimed to map flood-prone areas along the Jijia River in the Ungheni administrative unit of Iasi County. Human-induced environmental changes and global climate shifts have heightened flood risks worldwide, particularly in urbanized areas. Hydrological and hydraulic modeling anticipate and assess flood events, while hydrodynamic modeling accurately simulates flow propagation, in-forming flood extent, timing, and volume. Flood hazard maps offer essential insights into flooded areas, water depths, and velocities, assisting in risk assessment and mitigation strategies. Through the use of different scenarios, river modeling aims to accurately replicate real-world conditions. This study focuses on Ungheni commune in Iasi County, Romania, situated along the Prut River's eastern bank. Utilizing a combination of fixed-grid and irregular mesh elements in modeling al-lows for fine-tuning of flow details and optimization of simulation times. Model accuracy, particularly regarding peak river levels, hinges on hydrograph duration. While a 30-minute error is typically accepted, greater tolerances may apply to river basins with longer response times. The extraction and processing of model results, including maximum water depths, flood extents, and velocity maps, are facilitated by ArcGIS, providing valuable data for effective flood management strategies.

In recent years, the scientific and technological developments led to an explosion of available videos on the web, increasing the necessity of fast and effective video analysis and summarization. Video summarization methods aim to generate a synopsis by selecting the most informative parts of the video content. The user’s personal preferences, often involved in the expected results, should be taken into account in the video summaries. In this paper, we provide the first comprehensive survey on personalized video summarization relevant to the techniques and datasets used. In this context, we classify and review personalized video summary techniques based on the type of personalized summary, on criteria, on the video domain, on the source of information, on the time of summarization, and on the machine learning technique. Depending on the type of methodology used by the personalized video summarization techniques for the summary production process, we classify the techniques into five major categories, which are feature-based video summarization, key frame selection, shot selection-based approach, video summarization using trajectory analysis, and personalized video summarization using clustering. We also compare personalized video summarization methods and present 37 datasets used to evaluate personalized video summarization methods. Finally, we analyze opportunities and challenges in the field and suggest innovative research lines.

Abstract—The static and fatigue analysis of plates with holes, made of 2D woven roving composites, is conducted. The parametrization of convex holes is proposed. Experimental results of specimens without holes and with different shapes of notches are discussed. The fatigue behaviour is considered with the use of the low cycle fatigue method. The analysis is supplemented by the numerical finite element modeling. The present work is an extension of the results discussed in the literature. The finite element modeling of plates with holes is presented in details in Ref [1-3] including also the problems of the accuracy. The experimental results and the form of specimens are shown in Ref [4]. Two parametrical description of static and fatigue behaviour of plates with holes characterizes the goal and the novelty of the paper. The fuzzy approach is employed to reduce the number of experimental data [5].

Improper sitting positions are known as the primary reason for back pain and the emergence of musculoskeletal disorders (MSD) among individuals who spend prolonged time working with computer screens, keyboards, and mice. At the same time, it is well understood that automated technological tools can play an important role in the process of unhealthy habit alteration, so plenty of research efforts are focused on research and technology development (RTD) activities that aim to provide support to the prevention of back pain or the development of MSD. Here, we report on creating a new resource in support of RTD activities aiming at the automated detection of improper sitting positions. It consists of multimodal multisensory recordings of 100 persons made with a video recorder, camera, and wrist-attached sensors that capture physiological signals (PPG, EDA, Skin temperature), as well as motion sensors (three-axis accelerometer). Our multimodal multisensory dataset (MMD-MSD) opens new opportunities for modeling the body stance (sitting posture and movements), physiological state (stress level, attention, emotional arousal, valence), and performance (success rate on the Stroop test) of people working with a computer. Finally, we demonstrate two use cases: improper neck posture detection from pictures and cognitive load detection from physiological signals.

Efficient heat management and control in optical devices, facilitated by advanced thermo-optic materials, is critical for many applications such as photovoltaics, thermal emitters, mode-locked lasers, and optical switches. Here, we investigate the thermo-optic properties of 2D graphene oxide (GO) films by precisely integrating them onto microring resonators (MRRs) with control over the film thicknesses and lengths. We characterize the refractive index, extinction coefficient, thermo-optic coefficient, and thermal conductivity of for the GO films with different layer numbers and degrees of reduction, including reversible reduction and enhanced optical bistability induced by photo-thermal effects. Experimental results show that the thermo-optic properties of 2D GO films vary widely with the degree of reduction, with significant polarization anisotropy, enabling efficient polarization sensitive devices. The versatile thermo-optic response of 2D GO substantially expands the scope of functionalities and devices that can be engineered, making it promising for a diverse range of thermo-optic applications.

In recent decades, with the ever-growing scale of video data, near-duplicate videos continue to emerge. Data quality issue caused by near-duplicate videos is becoming more and more prominent, which has affected the application of normal videos. Although current studies on near-duplicate video detection can be helpful to uncover data quality issues for videos, they still lack a process of automatic merging for the video data represented by high-dimensional features, which are difficult to automatically clean the near-duplicate videos to improve data quality for video datasets. At present, there are few studies on near-duplicate video data cleaning. The existing studies have the sensitive problems of video data orderliness and clustering initial center under a condition that prior distribution is unknown, which seriously affect the accuracy of near-duplicate video data cleaning. To address the above issues, an automatic near-duplicate video data cleaning method based on a consistent feature hash ring is proposed in this paper. First, a residual network with convolutional block attention modules, a long short-term memory deep network, and an attention model are integrated to construct an RCLA deep network with the multi-headed attention mechanism to extract spatiotemporal features of video data. Then, a consistent feature hash ring is constructed, which can effectively alleviate the sensitivity of video data orderliness while providing a condition of near-duplicate video merging. To reduce the sensitivity of the initial cluster centers to results of near-duplicate video cleansing, an optimized feature distance-means clustering algorithm is constructed by utilizing a mountain peak function on a consistent feature hash ring, which can implement automatic cleaning of near-duplicate video data. Finally, experiments are conducted based on a commonly used dataset named CC_WEB_VIDEO and a coal mining video dataset. Compared with some existing works, simulation results demonstrate that the performance of the proposed method.

Optical polarizers are essential components for the selection and manipulation of light polarization states in optical systems. Over the past decade, the rapid advancement of photonic technologies and devices has led to the development of a range of novel optical polarizers, opening avenues for many breakthroughs and expanding applications across diverse fields. Particularly, two-dimensional (2D) materials, known for their atomic thin film structures and unique optical properties, have become attractive for implementing optical polarizers with high performance and new features that were not achievable before. This paper reviews recent progress in 2D-material-based optical polarizers. First, an overview of key properties of various 2D materials for realizing optical polarizers is provided. Next, the state-of-the-art optical polarizers based on 2D materials, which are categorized into spatial-light devices, fiber devices, and integrated waveguide devices, are reviewed and compared. Finally, we discuss the current challenges of this field as well as the exciting opportunities for future technological advances.

End-to-end learned image compression codecs have notably emerged in recent years. These codecs have demonstrated superiority over conventional methods, showcasing remarkable flexibility and adaptability across diverse data domains while supporting new distortion losses. Despite challenges such as computational complexity, learned image compression methods inherently align with learning-based data processing and analytic pipelines due to their well-suited internal representations. The concept of Video Coding for Machines has garnered significant attention from both academic researchers and industry practitioners. This concept reflects the growing need to integrate data compression with computer vision applications. In light of these developments, we present a comprehensive survey and review of lossy image compression methods. Additionally, we provide a concise overview of two prominent international standards, MPEG Video Coding for Machines and JPEG AI. These standards are designed to bridge the gap between data compression and computer vision, catering to practical industry use cases.

Live video streaming has become one of the main multimedia trends in networks in recent years. Providing Quality of Service (QoS) during live transmissions becomes a challenge due to the stringent requirements for low latency and minimal interruptions. This scenario has led to a high dependence on cloud services, implying a widespread usage of Internet connections, which constrains contexts where an Internet connection is not available. Thus, alternatives such as Mobile Ad Hoc Networks (MANETs) emerge as potential communication techniques. These networks operate autonomously with mobile devices serving as nodes, without the need for coordinating centralized components. However, these characteristics lead to challenges to live-video streaming, such as dynamic node topologies or periods of disconnection. Considering these constraints, this paper investigates the application of Artificial Intelligence (AI)-based classification techniques to provide adaptive streaming in MANETs. For this, a software-driven architecture is proposed to route stream in offline MANETs, predicting the stability of individual links and compressing video frames accordingly. The proposal has been implemented and assessed in a laboratory context, analyzing the model performance and QoS metrics. As a result, the model is implemented in a decision forest algorithm, which provides 95.9% of accuracy. Also, obtained latency values become assumable for video streaming, manifesting a reliable response for routing and node movements.

Glioblastomas (GBMs) are aggressive and invasive cancers of the brain, associated with high rates of tumor recurrence and poor patient outcomes despite initial treatment. Targeting cell migration is therefore of interest in highly invasive cancers such as GBMs, to prevent tumor dissemination and regrowth. One current aim of GBM research focusses on assessing anti-migratory properties of novel or repurposed inhibitors, including plant-based drugs which display anti-cancer properties. We investigated the potential anti-migratory activity of plant-based products with known cytotoxic effects in cancers, using a range of two-dimensional (2D) and three-dimensional (3D) migration and invasion assays as well as immunofluorescence microscopy to determine specific anti-migratory and phenotypic effects of three plant-derived compounds, Turmeric, Indigo and Magnolia bark, on established glioma cell lines. Migrastatic activity was observed in all three drugs, with Turmeric exerting the most inhibitory effect on GBM cell migration into scratches and from the spheroid edge at all timepoints investigated (p < 0.001). We also observed novel cytoskeletal phenotypes affecting actin and focal adhesion dynamics. By determining the migrastatic activity of Turmeric, Indigo and Magnolia on GBM cell migration, we demonstrate a potential role for Turmeric as a novel GBM anti-migratory therapeutic, in combination with the current standard of care, to prevent tumor recurrence and promote patient survival.

Sheep’s milk is a significant source of nucleotides monophosphate (NMPs) but can also contain undesirable residues from veterinary drugs, posing a potential human health risk. This study introduces a novel application of 2D-LC, in heart-cutting mode, for the simultaneous determination of nucleotides and veterinary drug residues in sheep’s milk. Two-dimensional liquid chromatography (2D-LC) allows for the separation of these compounds in a single chromatographic run despite their differing physicochemical properties. The proposed method separates six veterinary drug residues and five NMPs in a single injection. The compounds were separated using a C18 reversed-phase column in the first dimension and a Primesep SB analytical column in the second dimension. The method performance was evaluated in terms of linearity range, detection and quantification limits, matrix effects, precision, and accuracy. The results demonstrated good linearity and sensitivity, with quantification limits allowing for the quantification of veterinary drugs at the maximum residue level and nucleotides at typical levels found in milk samples. The method has been successfully applied to the analysis of sheep’s milk samples acquired from local supermarkets, with recoveries within a range of 70-119 % and 82-117 % for veterinary residues and NMPs, respectively.

Locoregional anaesthetic techniques are invaluable for providing multimodal analgesia for painful surgical procedures. This prospective, randomised study describes a nerve stimulator-guided bra-chial plexus blockade (BPB) in rabbits undergoing orthopaedic surgery in comparison to systemic lidocaine. Premedication was provided with intramuscular (IM) medetomidine, fentanyl and midazolam. Anaesthesia was induced (propofol IV) and maintained with isoflurane. Nine rabbits received a lidocaine BPB (2%; 0.3 ml kg-1), and eight received lidocaine constant rate infusion (CRI) (2 mg kg-1 IV, followed by 100 µg kg-1 minute-1). Rescue analgesia was provided with Fentanyl IV. Carprofen was administered at the end of surgery. Post-operative pain was determined using the Rabbit Grimace Scale (RGS) and a composite pain scale. Buprenorphine was administered accord-ing to pain score for two hours after extubation. Rabbits were filmed during the first two hours to measure distance travelled and behaviours. Food intake and faeces output were compared. Every rabbit in CRI required intraoperative rescue analgesia compared to no rabbits in BPB. How-ever, rabbits in both groups had similar pain scores and there was no difference in administration of postoperative analgesia. There were no significant differences in food intake or faeces produc-tion over 18 hours, and no significant differences in distance travelled, or behaviours examined during the first two hours. BPB seems superior for intraoperative analgesia. Postoperatively both groups were comparable.

Abstract: Laryngoscopy for tracheal intubation has been developed for many decades. Among various conventional laryngoscopes, videolaryngoscopes (VL) have been applied in different patient populations, including difficult airways. The safety and effectiveness of VL have been repeatedly studied in both normal and difficult airways. The superiority of VL then has been observed and is advocated as the standard of care. In contrast to laryngoscopy, the development of video-assisted intubating stylet (VS, also named as styletubation) has been noticed two dec-ades ago. Since then, sporadic clinical experiences of use have appeared in literature. In this re-view article, we presented our vast use experiences of the styletubation (more than 55,000 pa-tients since 2016). We found this technique is swift (the time to intubate: from 3 s to 10 s), smooth (first-attempt success rate: 100%), safe (no airway complications), and easy (high subjective satis-faction and fast learning curve for the novice trainees) in both normal and difficult airway sce-narios. We therefore propose styletubation technique can be feasibly applied as universal rou-tine use for tracheal intubation.

This paper presents a study of the 2D roughness profiles on a flat surface generated on a steel work piece, by ball nose end milling, with linear equidistant tool paths (pick-intervals). The milled surface exploration with a surface roughness tester (on pick and feed directions) produces usually 2D roughness profiles having periodical evolutions. These evolutions can be seen as time-dependent signals, describable as a sum of sinusoidal components (the wavelength of each component being regarded as a period). In order to detect a well approximated description of these components, two appropriate signal processing techniques are used in this work: first technique provides a direct mathematical (analytical) description and is based on computer aided curve (signal) fitting (more accurate), the second technique (providing an indirect and incomplete description) is based on the spectrum generated by fast Fourier transform (less accurate). This study can be seen as a way for a better understanding the interaction between the tool and the work piece or to achieve a mathematical description of the machined surface microgeometry in terms of roughness (e. g. its description being a collection of closely spaced 2D roughness profiles).

Layered halide perovskites have emerged as a promising contender in solid-state lighting thanks to their tunable bandgap, high luminescence quantum yield, and high color purity. However, the fabrication of perovskite light-emitting devices in laboratories usually experiences low de-vice-to-device reproducibility since perovskite crystallization is highly sensitive to ambient condi-tions, such as humidity and temperature. Although device processing inside gloveboxes is primarily used to reduce the influence of oxygen and moisture, several extraneous variables, including gas-eous pollution traces and thermal fluctuations in the inert atmosphere or contaminations from re-sidual solvents confined in the enclosed environment, can destabilize the crystallization process and alter the properties of the emissive layers. Here, we examine different experimental set-ups for spin-coating deposition of layered perovskites in inert atmospheres and their influences on the formation of polycrystalline thin films. Our results demonstrate that fluctuations in the glovebox properties (concentrations of residual O2 and H2O or solvent traces), even in very short timescales, can negatively impact the consistency of the perovskite film formation, while thermal variation plays a relatively minor role in this phenomenon. Furthermore, careful storage of chemical species inside the workstation is critical for reproducing high-quality perovskite layers. Consequently, when applying our most controlled environment for perovskite deposition, the photoluminescence life-time of perovskite thin films shows a standard deviation of only 3%, whereas the reference set-up yields a 15% standard deviation. Regarding complete perovskite light-emitting diodes, the uncer-tainties in statistical luminance and EQE data are significantly reduced from 230% and 140% to 38% and 42%, respectively.

Primary ciliary dyskinesia (PCD) is an inherited disorder that impairs motile cilia, essential for respiratory health, with a reported prevalence of 1 in 16,309 within Hispanic populations. Despite having the RSPH4A [c.921+3_921+6del (intronic)] founder mutation in 70% of Puerto Rican patients, the characterization of the ciliary dysfunction remains unidentified due to the unavailability of advanced diagnostic modalities like High-Speed Video Microscopy Analysis (HSVA). Our study implemented HSVA for the first time on the island as a tool to better diagnose and characterize the RSPH4A [c.921+3_921+6del (intronic)] founder mutation in Puerto Rican patients. By applying HSVA, we analyzed the ciliary beat frequency (CBF) and pattern (CBP) in native Puerto Rican patients with PCD. Our results showed decreased CBF and a rotational CBP linked to the RSPH4A founder mutation in Puerto Ricans, presenting a novel diagnostic marker that could be implemented as an axillary test into the PCD diagnosis algorithm in Puerto Rico. The integration of HSVA technology in Puerto Rico substantially enhances the framework for PCD evaluation and diagnosis, facilitating prompt detection and early intervention for improved disease management. This initiative, demonstrating the potential of HSVA as an adjunctive test within the PCD diagnostic algorithm, could serve as a blueprint for analogous developments throughout Latin America.

Background We aimed to evaluate the effectiveness of the ALRYNGO channel-type video laryngoscope with an AI-based glottis guidance system in senior emergency medicine residents for endotracheal intubation. Methods We enrolled twenty patients would be adequate for each device (direct laryngoscope, Pentax-AWS, and ALRYNGO). Before intubation, six senior residents wore a personal protective equipment. To randomize the device in this clinical study, a sealed envelope containing a device-specific identification card was utilized. When intubation began, the person who measured the intubation time divided the total intubation time into three-time intervals. The primary outcome was the intubation time. The secondary outcomes were the glottis view using the Cormack-Lehane grade (C-L grade) and the glottis guidance performance of ALRYNGO’s artificial intelligence. Results In Pentax-AWS and ALRYNGO, all intubations were successful, but the intubation time was longer than with the direct laryngoscope. And among the three, the ALRYNGO and Pentax-AWS had the highest frequency of C-L grade I (easiest intubation) at 80%, and the direct laryngoscope had the lowest frequency of 10%. Conclusions Even if healthcare professionals without experience with the channel-type video laryngoscope improve their performance on airway mannequins after training, their intubation performance may differ when applied to actual patients.

The performance of the presurgical test (preSurg) for temporal lobe epilepsy (TLE) was evaluated via video-electroencephalography (VEEG), electroencephalography (EEG), 99mTc-HmPAO single-photon emission tomography (SPECT) and 1.5 T magnetic resonance imaging (MRI) in a group of 112 men (37.0 ± 1.1 years) and 106 women (39.7 ± 1.1 years) operated on for TLE. The epileptic zone (EZ) was adequately identified to determine whether the patient reached an Engel I grade (EI) at least one year postop. Accuracy was evaluated by the coefficient α, ranging from 3 (when result = EZ) to 2 (result in the same hemisphere as the EZ), 1 (noninformative result) or 0 (EZ in the contralateral hemisphere). The simplicity of diagnosis was defined as the number of preSurg surgeries needed to identify the EZ. EI was obtained in 85.8% of patients even though 42.2% of patients had noninformative MRI results. For preSurg α was (mean ± SEM) = VEEG (2.83 ± 0.04) &gt; MRI (2.14 ± 0.08) &gt; EEG (1.87 ± 0.09) &gt; SPECT (1.71 ± 0.09). The accuracy (combination of sensitivity and specificity) was calculated as follows: VEEG (0.797) &gt; MRI (0.518) &gt; EEG (0.446) &gt; SPECT (0.360). The likelihood positive ratio was greater, and the likelihood negative ratio was lower for VEEG. The most relevant factor for the regression model was VEEG (3.106) &gt; MRI (2.558) &gt; EEG (1.905), and the factors were not significantly related to SPECT. EZs in EI patients with low simplicity were identified mainly by VEEG. A very good postoperative outcome can be obtained even in TLE patients with no lesions on MRI. The VEEG is the most reliable preSurg test and may be the only reliable test for patients with very low simplicity (i.e., difficult).single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: Place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: briefly describe the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article and it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions.

Chaotic theory is commonly being researched for application in image encryption scheme (IES). In this paper, a novel two-dimensional cross hyperchaotic Sine-modulation-Logistic map (2D-CHSLM) based on the famous Sine and Logistic maps. The hyperchaotic behaviors of 2D-CHSLM is testified with the help of their bifurcation diagrams, trajectory plots, Lyapunov exponents, sample entropy, C0 complexity, permutation entropy and 0-1 test. A new bit-level IES with traditional encryption structure is proposed utilizing 2D-CHSLM. The 2D-CHSLM-IES performs a 2D-CHSLM-based bit-level confusion using zig-zag transform and a 2D-CHSLM-based cross coupled diffusion operations for generating a highly secure cipher-image. Then the simulations and security analyses are further carried out with the help of key space, key sensitivity, histogram, correlation, information entropy, differential attack, noise and data loss attacks, prove that the security of the proposed 2D-CHSLM-IES

Cities are especially vulnerable to heavy rainfall events and the associated flooding. Urban drainage systems are not dimensioned to handle extreme heavy rainfall events, there is a need to enhance the resilience of those systems. Nature-based solutions (NBS) have the potential to retrofit existing urban drainage systems by providing, among other benefits, storage volume. This study presents an approach for including NBS with different degrees of implementation in a 1D/2D model and investigates their potential for flood mitigation in a study area in Berlin. The analyzed NBS are infiltration systems (e.g. infiltration swales) dimensioned to return periods of T = 5 and 100 years, various green roofs and tree locations (e.g. tree trenches). The NBS are represented by SWMM LID elements. The results show that overall the mitigation effect of NBS declines with increasing rainfall intensities. However, infiltration systems dimensioned to T = 100 years achieve almost three times the flood reduction compared to systems dimensioned to T = 5 years, even during extreme heavy rainfall events (100 mm), resulting in a reduced total flood volume of 15.1% to 25.8%. Overall, green roofs (excluding extensive green roofs) provide the greatest flood reduction (33.5%), while tree locations have the least effect.

This paper introduces an innovative nanotechnology-based approach that provides a pathway to enhance the energy release efficiency of nanoenergetic materials (nEMs) by harnessing self-synchronized collective atomic vibrations and phonon wave resonance within the transition domains between nanocomponents, without altering the material composition. The key innovation involves incorporating finely-tuned 2D-ordered linear-chain carbon-based multilayer nano-enhanced interfaces as programmable nanodevices into the transition domains using advanced multistage processing and assembly techniques. These programmable nanodevices enable precise control over self-synchronized collective atomic vibrations and phonon wave propagation, leading to synergistic effects. To activate and optimize these effects, a combination of various methods is employed, including energy-driven initiation of allotropic phase transformations, surface acoustic wave-assisted micro/nano-manipulation, heteroatom doping, directed self-assembly using high-frequency electromagnetic fields, and data-driven inverse design approaches. By leveraging a data-driven inverse design strategy and uncovering hidden structure-property relationships, we maximize energy release efficiency using the carbon nano-materials genome approach derived from multifactorial neural network-based predictive models. This approach not only unlocks new functionalities in nEMs but also improves environmental performance and safety levels. By pioneering transformative pathways for nEMs through harnessing phonon wave resonance in low-dimensional nanocarbon transition interfaces, this research brings significant advancements in the field.

Primary spontaneous pneumothorax (PSP) is a pleural disease that abruptly affects healthy adolescents and young adults, representing a common thoracic disorder in this age group. This study aimed to investigate the necessity of preoperative chest tube insertion in patients with PSP and to re-evaluate current clinical treatment approaches. A retrospective review of medical records was conducted for children and young adults aged 14–30 years, diagnosed with PSP and who underwent Video-assisted thoracoscopic surgery (VATS) between January 2016 and December 2022 at Wonju Severance Christian Hospital. Patients were retrospectively divided into two groups based on their initial treatment: chest tube insertion and non-chest tube insertion. Clinical data including demographics, treatment details, and outcomes were collected and compared. Total 128 cases of PSP were included in the study. The total length of hospital stay was significantly shorter in the non-chest tube group (p=0.000), which was attributed to the omission of pre-operative chest tube insertions. No significant differences were observed between the two groups in terms of postoperative complications or recurrence rates. In cases of young patients with PSP, omitting pre-operative chest tube insertion may be a viable option if the patient is scheduled for VATS.

Video gamers can play to negate the psychological impact of stress (Pine et al., 2020), which may become problematic when users over-rely on the stress-relief potential of gaming. This study used a repeated-measures experimental design to investigate the relationships between stress, video gaming, and problematic video gaming behaviours in a convenience sample of 40 students at a UK university. Results indicated that positive affect increased and negative affect decreased, whilst a biological stress measure (Instantaneous Pulse Rate) also decreased after a short video gaming session (t(36) = 4.82, p < .001, d = 0.79). Results also suggest that video gaming can act as a short-term buffer against the physiological impact of stress. Further research should focus on testing individuals who have been tested for Gaming Disorder as opposed to a general population. Research could also utilise variations of the methodological framework used in this study to examine the intensity of a stress-relief effect under different social situations. The study’s findings in relation to published work are also discussed.

Rectenna is the key component in radio-frequency circuits for receiving and converting electromagnetic waves into direct current. However, it is very challenging for the conventional semiconductor diode switches to rectify high-frequency signals for 6G telecommunication (&gt;100 GHz), medical detection (&gt;THz) and rectenna solar cells (optical frequencies). Such a major challenge can be resolved by replacing the conventional semiconductor diodes with tunneling diodes as the rectenna switches. In this work, metal-insulator-metal (MIM) tunneling diodes based on 2D insulating materials were designed, and their performance was evaluated using a comprehensive simulation approach which includes density-function-theory simulation of 2D insulator materials, modeling of the electrical characteristics of tunneling diodes, and circuit simulation for rectifiers. It is found that novel 2D insulators such as monolayer TiO2 can be obtained by oxidizing sulfur-metal layered materials. The MIM diodes based on such insulators exhibit fast tunneling and excellent current rectifying properties. Such tunneling diodes effectively convert the received high-frequency electromagnetic waves into direct current.

Over the past few decades, digitalisation has pushed patient care towards a new era, inducing the evolution of health care delivery and enhancing the overall sustainability of health systems worldwide. Despite the ever-evolving technology leading to a change in health care provision, the uptake of these novel technologies by medical professionals is slow, largely because of concerns about the potential impact on patient care and patient safety, and medico-legal implications. Hence, this research aimed to understand doctors’ perceptions of the adoption of digital virtual consultations in the practice setting.In this survey, an online questionnaire, adapted from the construct by Venkatesh and Bala and based on the Technology Acceptance Model by Davis, was distributed to 886 hospital doctors. Altogether 133 responses were obtained.Results suggest that the respondents perceived digital virtual consultations as adjuncts to face-to-face consultations and as able to diminish time and place barriers. Doctors were willing in principle to utilise these alternatives to traditional methods if the appropriate infrastructure and technology were in place. Feasibility and cost-effectiveness studies are recommended to establish the technology-fit factor and the impact of the technology on the workforce, coupled with a stakeholder analysis to include all the actors involved in such a strategy.

Background: Learning arrangements in health care profession education are increasingly taking place in digital environments. VR in nursing education, as one of the digital elements, is the subject of controversial debate. On the one hand it supports the authenticity of case studies by adding realistic perspectives and information. On the other hand, the costs of developing and maintaining software and hardware hinder long-term implementation. Methods: In this paper, we describe our findings and insights from two different research projects focused on the incorporation of digital tools, particularly virtual reality (VR), into nursing education. Based on the German context, our aim is to promote the adoption of innovative digital methods in nursing education and to offer invaluable experiences from the field. Results: Starting with a brief recapitulation of the projects, we then elucidate the pedagogical strategies for embedding VR-driven scenarios in nursing education. Based on our experiences during the projects we identify various positive aspects, such as change of perspective and simulating acute situations. Key findings: Although potential drawbacks remain, we advocate long-term implementation and specific use of VR at the interface between theory and practice. Nevertheless it is crucial to establish regular evaluation observing the value of digitalisation, especially VR; for nursing education.

The use of video in education has become ubiquitous as technological developments have markedly improved the ability and facility to create, deliver and view videos. The concomitant pedagogical transformation has created a sense of urgency regarding how video may be used to advance learning. Initial reviews have suggested only limited potential for the use of video in higher education. More recently, a systematic review of studies on the effect of video use on learning in higher education, published in the prestigious Review of Educational Research, found, overall, effects to be positive. In the present paper we critique this study and provide some needed clarity to the state of research on learning via video in higher education. We reveal significant gaps in the study methodology and write-up and use a cognitive processing lens to critically assess and reanalyse study data. We found results of this study to be only applicable to learning requiring lower-level cognitive processing and conclude, consistent with prior research, learning benefits remain limited.

While current video quality assessment research predominantly revolves around resolutions of 4K and beyond, targeted at Ultra High-Definition (UHD) displays, effective video quality for mobile video streaming remains primarily within the range of 480p to 1080p. In this study, we conducted a comparative analysis of the Quality of Experience (QoE) for widely implemented video codecs on mobile devices, specifically Advanced Video Coding (AVC), its successor High-Efficiency Video Coding (HEVC), and Google's VP9. Our choice of 720p video sequences from a newly developed database, all with identical bitrates, aimed to maintain a manageable subjective assessment duration, capped at 35-40 minutes. To mimic real-time network conditions, we generated stimuli by streaming original video clips over a controlled emulated setup, subjecting them to eight different packet loss scenarios. We evaluated the quality and structural similarity of the distorted video clips using objective metrics, including Video Quality Metric (VQM), Peak Signal-to-Noise Ratio (PSNR), Video Multi-Method Assessment Fusion (VMAF), and Multi-Scale Structural Similarity Index (MS-SSIM). Subsequently, we collected subjective ratings through a custom mobile application developed for Android devices. Our findings revealed that VMAF accurately represents the degradation in video quality compared to other metrics. Moreover, in most cases, HEVC exhibits an advantage over both AVC and VP9 under low packet loss scenarios. However, it is noteworthy that in our test cases, AVC outperformed HEVC and VP9 in scenarios with high packet loss, based on both subjective and objective assessments. Our observations further indicate that user preferences for the presented content contribute to video quality ratings, emphasizing the importance of additional factors that influence the perceived video quality of end-users.

Power sources that can consistently deliver high levels of energy over extended periods are crucial for various space applications. Among the many methods of energy generation, direct heat-to-electricity conversion without intermediate steps or moving components shows particular promise but also presents significant challenges. The aim of this research is to address these challenges by enhancing the energy efficiency of thermionic conversion, which transforms thermal energy into electrical energy, through the development and utilization of a novel class of emission nanomaterials known as multilayer carbyne-enriched 3D-shaped nano-interfaces. By manipulating the topological, physicochemical, and functional characteristics of these interfaces, we seek to optimize their thermionic conversion capabilities. Building on the recent discovery of collective atomic vibrations called phonon waves within transition domains of multilayer nanostructures, we have devised a new approach to enhance the efficiency of thermionic energy converters. This involves unlocking the predictive functionality of 2D-ordered linear-chain carbon-based multilayer emitters through the excitation and fine-tuning of collective atomic vibrations and nanoarchitecture. To achieve this, we propose employing a combination of techniques that leverage interface effects, enable phonon wave propagation, facilitate energy exchange, and capitalize on synergistic effects offered by the multilayer nano-enhanced interfaces. The resulting devices for thermionic energy conversion have the potential to significantly surpass the efficiency of existing plasma thermionic converters by several orders of magnitude. Moreover, these electricity-generating sources based on thermionic conversion represent fundamental options for the advancement of Lunar and Martian research missions, opening up possibilities for sustainable energy production in extraterrestrial environments.

Consumers are attracted by the increasing number of available SVOD platforms, but subscribing to all of them would be too expensive. To reduce costs, consumers could combine the use of proprietary subscriptions, non-proprietary subscriptions, and illegal streaming sites. In turn, platforms could enforce access control, a decision that could produce the desired reduction in non-proprietary subscriptions but also an undesired reduction in proprietary subscriptions. The effects of this decision and the determinants of SVOD content demand remain largely unexplored. We propose a baseline model where the SVOD content demand is driven by variety seeking, household financial situation, ethical evaluation, and social norms, as well as a change model where the subscription variation is driven by users’ trait reactance and perceived fairness of the decision. We conducted a survey on the current ways of SVOD content consumption and the responses to a hypothetical access control enforcement, with four randomized versions of the authentication mode. Results confirmed many of the proposed determinants and showed a noteworthy reduction in proprietary subscriptions due to the control enforcement but no effect due to the authentication modes. All these findings may help improve future models on SVOD content consumption and better address the difficult challenge of converting unauthorized users into authorized ones.

Well-being is one of the pillars of positive psychology, which is known to have positive effects not only on the personal and professional lives of individuals, but also on teams and organizations. Understanding and promoting individual well-being is essential for staff health and long-term success, but current tools for assessing subjective well-being rely on time-consuming surveys and questionnaires, which limit the possibility of providing the real-time feedback needed to raise awareness and change individual behavior. This paper proposes a framework for understanding the process of non-verbal communication in teamwork, using video data to identify significant predictors of individual well-being in teamwork. It relies on video acquisition technologies and state-of-the-art artificial intelligence tools to extract individual, relative, and environmental characteristics from panoramic video. Statistical analysis is applied to each time series, leading to the generation of a dataset of 125 features, which are then linked to PERMA (Positive Emotion, Engagement, Relationships, Meaning, and Accomplishments) surveys developed in the context of positive psychology. Each pillar of the PERMA model is evaluated as a regression or classification problem using machine learning algorithms. Our approach was applied to a case study, where 80 students collaborated in 20 teams for a week on a team task in a face-to-face setting. This enabled us to formulate several hypotheses identifying factors influencing individual well-being in teamwork. These promising results point to interesting avenues for research, for instance fusing different media for the analysis of individual well-being in teamwork.

Introduction: Dental students’ use of online material to supplement learning has been studied, but educator awareness and reaction to the findings of this research is unknown. This small local study aimed to investigate dental students’ use of online content as a learning tool from an educator’s perspective.Methods: Educators at an Irish dental school completed a survey based on dental students’ use of online learning. Quantitative descriptive analyses were carried out as appropriate on the data collected, and a subsequent focus group was held to gain deeper insight into survey results. Data were analysed for themes by deductive and inductive coding methods.Results: This study found a sample of educators were aware of some student behaviours around online videos. Most educators correctly thought that students are likely to refer to online videos to prepare for dental procedures. Several educators believed that teachers should incorporate videos into their learning, but do not themselves upload or recommend online videos. Most recalled discussing accuracy and/or relevancy of online content with their students. Fewer thought that students would discuss contradictory videos with them. Focus group participants expressed concern over the accuracy of online content. This along with a lack of time were some reasons deterring them from referring students to online videos. Conclusions: An opportunity exists for dental educators and their students to have local dialogue around (1) student use, critical appraisal, and sharing of dental procedural video material; and (2) perceived benefits and challenges of incorporating both school-produced and online videos into teaching and learning. Although arguably non-generalizable beyond this context, this study may inform future research and serve to spark conversations within schools regarding video use for teaching clinical dental procedures.

This paper presents an approach to teacher identity heritage as result of the implementation of a research device created through Arts-based Research (ABR) methods, specifically with video elicitation and video essay used as research tools. Two main objectives were raised. The first one, to establish the real relevance of focusing performance on teacher identity. The second one, testing a new methodological proposal specifically designed for this purpose, but still useful in other contexts where heritage identity is as present as in teaching. The device, Body-camera, involves a process that allows new ways to understand the creation of identities using video to encourage the production of new meanings by visual and oral data. The participants were teachers in training during their internship period. Some notions about teachers' identity heritage were revealed, and also preserved, firstly, through personal perspectives by video elicitations and secondly, through collective perspectives by video essays. Both are video structures used in ABR which mix creative experience, memories, life experiences, relationships and links that shape the teachers’ professional identity.

In this paper, an intelligent blind guide system based on 2D LiDAR and RGB-D camera sensing is proposed, and the system is mounted on the smart cane. The intelligent guide system relies on 2D LiDAR, RGB-D camera, IMU, GPS, Jetson nano B01, STM32 and other hardware. The main advantage of the intelligent guide system proposed by us is that the distance between the smart cane and obstacles can be measured by 2D LiDAR based on Cartographer algorithm, thus achieving Simultaneous localization and mapping (SLAM). At the same time, through the improved yolov5 algorithm, pedestrians, vehicles, pedestrian crosswalks, traffic lights, warning posts, stone piers, tactile paving and other objects in front of the visually impaired can be quickly and effectively identified. Laser SLAM and improved yolov5 obstacle identification tests were carried out inside a teaching building on the campus of Hainan Normal University and on a pedestrian crossing on Longkun South Road in Haikou City, Hainan Province. The results show that the intelligent guide system developed by us can drive the wheels and omnidirectional wheels at the bottom of the smart cane, and give the smart cane a self-leading blind guide function like a "guide dog", which can effectively guide the visually impaired to avoid obstacles and reach the predetermined destination, and can quickly and effectively identify the obstacles on the way out. The laser SLAM speed of this system is 25~31FPS, which can realize the short-distance obstacle avoidance and navigation function both in indoor and outdoor envionments. The improved yolov5 helps to identify 86 types of objects, the recognition rate for pedestrian crosswalks and for vehicles are 84.6% and 71.8%, respectively; the overall recognition rate for 86 types of objects is 61.2%, and the obstacle recognition rate of the intelligent guide system is 25-26FPS.

Elaborate sound design, including background music, ambient sounds (sounds describing the game world), and character sounds (sounds generated by the character’s actions), plays a pivotal role in modern videogames. However, the influence of these different types of sound on the player experience has not been extensively researched. This study examines the influence of these sound types on immersion, avatar identification, fun and perceived competence. In two experiments, participants played League of Legends in four different sound conditions. The first experiment revealed a non-significant trend in the effect of character sound on avatar identification. Ambient sounds, however, were limited in this experiment because the task restricted participants’ movement across the game map. Consequently, we adapted the task to allow for a wider variety of ambient sounds in the second experiment. Here, a significant impact of character sounds on immersion, avatar identification, and fun, was observed, as well as an interaction effect of character sounds and ambient sounds on fun. Furthermore, we observed a trend, though not statistically significant, suggesting that ambient sounds may influence the player’s sense of flow. These findings underline the distinct effects of different sound types and we discuss implications for the design of sound in video games.

This study presents a method for the rapid and accurate generation of two-dimensional (2D) orthomosaic maps using selected image data collected by drone-captured video. The focus is on developing a real-time method capable of creating maps more quickly than image selection. The scale-invariant feature transform (SIFT) algorithm is applied to drone images to extract features in various scale regions. For feature point matching, a matching method based on the fast library for approximate nearest neighbors (FLANN) was adopted. A comparison of the computational speed of the FLANN with that of the k-nearest neighbors (KNN) and brute force matcher during the matching process revealed FLANN's superior capability for real-time data processing. The random sample consensus (RANSAC) algorithm was employed to enhance the accuracy of the matching by removing outliers, effectively identifying and eliminating mismatches, and reinforcing the reliability of feature point matching. The combination of SIFT, FLANN, and RANSAC algorithms demonstrates the capacity to process drone-captured image data in real time, facilitating the generation of precise 2D orthomosaic maps. The proposed method was assessed and validated using imagery obtained as the drone executed curvilinear and straight flight paths, confirming its accuracy and operational efficiency concurrently with the image capture process.

Glial cells provide physical and chemical support and protection for neurons. Secreted neurotrophic factors, scaffolds and vesicles regulate in addition to normal homeostasis, repair following neural tissue injury or degeneration. We previously demonstrated that human CNS glia have revascularization capacity by inducing endothelial cell sprouting and microchanneling driven by glial cell secreted components. The clinical potential of using secreted factors and vesicles generated by glial cells in conditioned media was shown by their re-normalization of pathological blood vessels and 3D tissue wound healing and remodeling capacity. To identify secreted components of glial cells and how CNS and PNS glial cells differentially regulate neural tissue homeostasis, disease and injury response, we developed a novel culture method for various types of glial cells that allow for isolating and characterizing secreted glial components, free of animal factors and contaminants normally associated with serum-based culture conditions. Our culture method will enable to identify secreted components using ultrasensitive RNA, glycoconjugate and protein analysis technologies. The characterization of glial secreted factors involved microchanneling may help in development of new clinical therapies for glial and neural cells or axons to migrate and reform connections.

This paper presents a model for archival and retrieval of the videos of natural flowers. To design an efficient video retrieval system the stages namely, keyframe selection, feature extraction, feature dimensionality reduction and indexing are essential for fast browsing and accessing of videos. Three different keyframe selection approaches are proposed using clustering algorithms after segmenting flower regions from its background. Deep Convolutional Neural Network is used as a feature extractor. After keyframe selection, a video is represented with a set of keyframes. To reduce the feature dimension of a video, two feature selection methods are utilized. For an efficient archival and fast retrieval of flower videos an indexing method called KD-tree is recommended. For a given query video, similar videos are retrieved both in relative and absolute search modalities. An extensive experimentation conducted on a relatively large flower video dataset. The data set consists of 7788 videos of 30 different species of flowers. The videos are captured with three different devices in different resolutions. The comparative study reveals proposed keyframe selection approaches gives better results. It has also been observed that the videos retrieved in absolute approach with features selected from Binormal separation metric and indexing gives good results.

Chiral semiconductor nanostructures and nanoparticles are promising materials for applications in biological sensing, enantioselective separation, photonics, and spin-polarized devices. Here, we have studied the induction of chirality in atomically thin only 2 monolayers thick CdSe nanoplatelets (NPLs) grown by a colloidal method and exchanged with L-alanine and L-phenylalanine as model thiol-free chiral ligands. We have developed a novel two-step approach to completely exchange the native oleic acid ligands for chiral amino acids at the basal planes of NPLs. We performed an analysis of the optical and chiroptical properties of the chiral CdSe nanoplatelets with amino acids, which was supplemented by an analysis of the composition and coordination of ligands. After the exchange, the nanoplatelets retain HH, LH and SO exciton absorbance and bright HH exciton luminescence. Capping with thiol-free enantiomer amino acid ligands induce pronounced chirality of excitons in the nanoplatelets, as proven by circular dichroism spectroscopy, with high dissymmetry g-factor up to 3.4 × 10−3 achieved for HH excitons in the case of L-phenylalanine.

Two-dimensional (2D) semiconductors like Transitional Metal Dichalcogenides (TMDCs) have attracted strong research interest in the last decade. Unlike the more celebrated 2D material graphene, TMDCs like molybdenum disulfide(MoS₂) possess bandgap. The number of layers critically depends on the band structure of MoS₂. For example, it is indirect for bulk MoS₂. However, it becomes direct bandgap material for a monolayer MoS₂. Monolayer MoS₂, therefore, becomes an important material for photoelectronic devices. An essential aspect of such devices is the metal-semiconductor junction. Metal-TMDC junction is, therefore, a well-studied interface due to its importance for 2D materials-based photoelectronic devices. Most importantly, it can be flexible, stretchable to it’s length, and bent to a large angle. We used metals like Au and Al to interface with TMDs like MoS₂. We used silicon and PDMS as substrates. So, we have to focus on investigating the relative properties of various TMDCs. We see change in band energy and vibrational modes via Photoluminiscence and Raman spectroscopy as shown in the article. However, certain aspects are yet to be explored, for example, how this interface behaves in the presence of strain.

Objectives: Chylothorax is a relatively rare condition of lymphatic fluid accumulation in the thoracic cavity due to a leakage from the thoracic duct or its tributaries. Patients present with dyspnea, malnutrition, and immunosuppression. Treatment can be conservative or surgical, depending on etiology and clinical course. The optimal management algorithm for chylothorax is still controversial. Methods: This is a retrospective study of all patients with chylothorax treated at our Department of Thoracic Surgery during the 10-year period. Results: A total of 14 patients were identified for the study. Nine patients had chylothorax after lung or esophageal cancer surgery. Four patients had chylothorax in advanced lymphoma. One patient had chylothorax after blunt chest trauma. A conservative approach was initiated in most patients (92%), including pleural drainage, nil per mouth, total parenteral nutrition, and somatostatin 0.1 mg bid subcutaneously. Surgical treatment was indicated in patients with thoracic drain production >800 mL per day beyond the fifth day of treatment and those with blunt thoracic trauma. Two patients had thoracic duct ligation via right-sided thoracotomy, and five patients had video-assisted thoracoscopic thoracic duct ligation with the immediate arrest of chylous leakage. Conclusion: Chylothorax should be treated conservatively initially. Surgical treatment should not be delayed in case of failure beyond the fifth day. In our series of patients, a video-assisted thoracoscopic approach for thoracic duct ligation proved to be minimally invasive, highly efficient, and well tolerated by patients and, therefore, should be the preferable route of surgical treatment.

On-chip integration of two-dimensional (2D) materials with unique structures and distinctive properties endow integrated devices with new functionalities and improved performance. With a high flexibility in modifying its properties and a strong compatibility with various integrated platforms, graphene oxide (GO) becomes an attractive 2D material for implementing functional hybrid integrated devices. Here, we demonstrate novel functionalities that go beyond the capabilities of conventional photonic integrated circuits, by harnessing the photo-thermal effects in 2D GO films integrated onto them. These include all-optical control and switching, optical power limiting, and non-reciprocal light transmission. The 2D layered GO films are on-chip integrated with precise control of their thicknesses and sizes. Benefitting from the broadband response of 2D GO films, all the three functionalities feature a very wide operational bandwidth. By fitting the experimental results with theory, we also extract the changes in material properties induced by the photo-thermal effects, which reveal interesting insights about 2D GO films. These results highlight the versatility of 2D GO films in implementing functional integrated photonic devices for a range of applications.

Human violence recognition is an area of great interest in the scientific community, given its broad spectrum of applications, especially in video surveillance systems, since detecting violence in real-time could prevent criminal acts and save lives. Despite the number of existing proposals and research, most focus on the precision of results, leaving aside efficiency and its practical implementation. Thus, this work proposes a model that is effective and efficient in recognizing human violence in real-time. The proposed model consists of three modules: a first module called Spatial Motion Extractor (SME), in charge of extracting regions of interest from a frame; a second module called Short Temporal Extractor (STC), whose function is to extract temporal characteristics of rapid movements, finally the Global Temporal Extractor (GET) module, responsible for identifying long-lasting temporal features and fine-tuning the model. The proposal was evaluated regarding efficiency, effectiveness, and ability to operate in real-time. The results obtained on Hockey, Movies, and RWF-2000 datasets demonstrated that this approach is highly efficient compared to other alternatives. A VioPeru dataset was created to validate real-time applicability with violent and non-violent videos captured by real video surveillance cameras in Peru. The effectiveness results in this dataset outperformed the best existing proposal. Therefore, our proposal has contributions in efficiency, effectiveness, and real-time.

The studies of laminar unsteady boundary layer flows is crucial for understanding laminar-turbulence transition and origins of turbulence. However, the task of finding its solutions poses a significant challenge. In this paper, we propose a novel approach by introducing a similar transformation to convert the 2D unsteady laminar boundary layer equations into a single partial differential equation. By applying this transformation, we are able to obtain the "exact" similarity solutions for the 2D unsteady laminar boundary layer equations, specifically for the case of flat plate boundary flow. Notably, this is the first time that such an exact solution has been obtained. Application of this exact solution is being used to solve Stokes' first problem in 2D boundary layer. Perspectives on the transition fron Rayleigh solution to Blasius solution is provided.

In industry 4.0 era, video applications such as surveillance visual systems, video conferencing, or video broadcasting have been playing a vital role. In these applications, for manipulating and tracking objects in decoded video, the quality of decoded video should be consistent because it largely affects to the performance of the machine analysis. To cope with this problem, we propose a novel perceptual video coding (PVC) solution in which a full reference quality metric named Video Multimethod Assessment Fusion (VMAF) is employed together with a deep convolutional neural network (CNN) to obtain the consistent quality while still achieving the high compression performance. First of all, to achieve the consistent quality requirement, we propose a CNN model with an expected VMAF as input to adaptively adjust the quantization parameters (QP) for each coding block. Afterwards, to increase the compression performance, a Lagrange coefficient of Rate-Distortion optimization (RDO) mechanism is adaptively computed under Rate-QP and Quality-QP models. Experimental results show that the proposed PVC has achieved two targets simultaneously: the quality of video sequence is kept consistently with an expected quality level and the bit rate saving of the proposed method is higher than traditional video coding standards and relevant benchmark, notably with around 10% bitrate saving in average.

The discovery of solitonlike coherent structure (SCS) in boundary layer flows is crucial for understanding turbulence origins and in particular for laminar-turbulence transition. However, the task of finding solutions for solitonlike coherent structure from the Navier-Stokes equations poses a significant challenge. In this paper, based on the author's previous work [B.H. Sun, Exact similarity solutions of unsteady laminar boundary layer flows, Preprints 2023, 2023092117], we are able to study convergent flow boundary layers, whose solution encompasses both shock wave and solitary wave solutions, and their superposition gives rise to solitary-like waves, namely solitonlike coherent structure. It is found that the solitonlike coherent structure can only be obtained by combining the Navier-Stokes equations and mass conservation, since the combined equations will have the third order derivatives respect to coordinate $x$, in other words, without the mass conservation condition, the Navier-Stokes equations does not contain solitonlike coherent structure by itself. Finally proved solitonlike coherent structure is a universal motion form of viscous fluid.

Social communication skills, especially eye contact and joint attention, are highly impaired in autism spectrum disorder (ASD) and predict functional outcomes. Applied Behavior Analysis is one of the best evidence-based treatments for ASD, but it is not accessible to most families in low- and middle-income countries (LMICs) as it is a costly and intensive and needs to be delivered by highly specialized professionals. Parental training has emerged as an effective alternative. The aim of this study was to test the efficacy of a parental intervention group via video modeling to acquire eye contact and joint attention. Four graded measures of eye contact and joint attention (full physical prompt, partial physical prompt, gestural prompt, and independent) were assessed in 34 children with ASD and intellectual disability (ID). There was a progressive reduction in the level of prompt required over time to acquire eye contact and joint attention, and a positive correlation between the time of exposure to the intervention and acquisition of the abilities. This parent training using video modelling to teach eye contact and joint attention skills to children with ASD and ID is a low-cost intervention that can be applied in low- resource settings.

Individuals with autism often experience gastrointestinal issues but the cause is unknown. Many gene mutations that modify neuronal synapse function are associated with autism and therefore may impact the enteric nervous system that regulates gastrointestinal function. A missense mutation in the Nlgn3 gene encoding the cell adhesion protein, Neuroligin-3, was identified in two brothers with autism who both experienced severe gastrointestinal dysfunction. Mice expressing this mutation (Nlgn3R451C mice) are a well-studied preclinical model of autism and show autism-relevant characteristics, including impaired social interaction and communication, as well as repetitive behaviour. We previously showed colonic dysmotility in response to GABAergic inhibition and increased myenteric neuronal numbers in the small intestine in Nlgn3R451C mice bred on a mixed genetic background. Here we show that gut dysfunction is a persistent phenotype of the Nlgn3 R451C mutation in mice backcrossed onto a C57BL/6 background. We report that Nlgn3R451C mice show faster gastrointestinal transit in vivo and have longer small intestines compared to wild-types due to a reduction in smooth muscle tone. In Nlgn3R451C mice, we observed a decrease in resting jejunal diameter and neurally-regulated dysmotility as well as shorter durations of contractile complexes in the ileum. In Nlgn3R451C mouse colons, short contractions were inhibited to a greater extent by the GABAA antagonist, gabazine, compared to wild-type mice. Inhibition of nitric oxide synthesis decreased the frequency of contractile complexes in the jejunum, but not the ileum, in both wild-type and Nlgn3R451C mice. These findings demonstrate that changes in enteric nervous system function contribute to gastrointestinal dysmotility in mice expressing the autism-associated R451C missense mutation in the Neuroligin-3 protein.

Vitamin D status may impact acute affective symptomatology and the severity of symptoms in patients with bipolar disorder (BD). Therefore, this cross-sectional study analyzed 25(OH)D, 24,25(OH)2D, and the vitamin D metabolite ratio (VMR) in BD and correlated the results with clinical affective symptomatology and functionality. The inactive precursor 25(OH)D and its principal catabolite 24,25(OH)2D were measured simultaneously with a validated liquid chromatography tandem mass-spectrometry method in 170 BD outpatients and 138 healthy controls. VMR was calculated as follows: VMR=100*(24,25(OH)2D/25(OH)D). The psychometric assessment enclosed: Beck Depression Inventory-II, Hamilton Depression Rating Scale, Young Mania Rating Scale, Global Assessment of Functioning, and number of suicide attempts. We did not find a significant difference between patients and controls in the concentrations of 25(OH)D and 24,25(OH)2D. Additionally, the VMR was comparable in both groups. The calculations for the clinical parameters showed a negative correlation between the Young Mania Rating Scale and 24,25(OH)2D (r = -.154, p = .040). Based on the small effect size and the predominantly euthymic sample, further exploitation in individuals with manic symptoms would be needed to confirm this association. In addition, long-term clinical markers, and an assessment in different phases of the disease may provide available additional insights.

The expansion of Open World Video Games (OWVGs) has seen the emergence of multiple new fictional worlds. This type of video game is characterized by total immersion in a world built for the players entertainment. What videogames developers want when players enter an OWVG is that they could feel like if they were open a door to an entirely new world and leave the real world behind. These virtual worlds manifest as a complement, an alternative, or the successor to the physical universe, and in some way continue the philosophical tradition of possible worlds begun by Leibniz. Accustomed to ‘surviving’ in hostile environments, millions of people continued to improve their skills in the midst of the COVID-19 pandemic while locked in their homes. Once the pandemic seems to start to be left behind, the paper analyzes the virtual worlds created by the video games and the relations between the pandemic and these fictional worlds.

In this research, a computation algorithm is established for a fractional order 2D fuzzy heat equation. In this study, Elzaki transform and HPM fusion is produced. Computing the desired outcome in series yields a fast convergence on an appropriate response. Examples are provided to support the conclusions, which are then compared with a particular approach to show the effectiveness and potential of the suggested approach. Two crisp equations—one for the lower bound solution and one for the upper bound solution are constructed from the input fuzzy fractional heat equation. The contour and surface representations of the approximate and exact results are offered for the lower and upper-bound solutions. The l∞-error norm is used in this study to validate the numerical convergence aspect. Together with the absolute inaccuracy, the approximate and exact solutions are matched. It has been demonstrated that the proposed regime will make it feasible to work with fuzzy fractional partial differential equations in a wide range of dimensions.

Two-dimensional (2D) bismuth oxyhalides (BiOX) have attracted much attention as potential optoelectronic materials. Expecting for their application diversity, we herewith systematically investigate the tunable properties of 2D BiOX by using first principles calculations. Their electronic and optical properties can be modulated by changing the number of monolayers, applying strain, and/or varying the halogen composition. The bandgap shrinks monotonically and approaches the bulk value, the optical absorption coefficient increases, and the absorption spectrum redshifts, as the layer number of 2D BiOX increases. Carrier transport property can be improved by applying tensile strain, and the ability of photocatalytic hydrogen evolution can be obtained by applying compressive strain. General strain engineering will be effective in linearly tune the bandgap of BiOX in a wide strain range. Strain together with halogen composition variation can tune the optical absorption spectrum to be on demand in the range from visible to ultraviolet. It suggests that that 2D BiOX materials have potential serving as tunable novel photodetectors, can be used to improve clean energy techniques, and are prospective in the field of flexible optoelectronics.

Graphene is a two-dimensional carbon atom with a hexagonal honeycomb-like structure in which the sp2 hybridization occurs. GO sheets are highly oxidized and have oxygen-containing groups. Properties of electronics, mechanicals, magnetics, and optics, Oxidized Methods for Brodies, Staudenmaier, Hofmann, Hummers, Improved Hummers, and Tour's Methods Reduction of Graphene oxide methods Chemical Reduction using sodium borohydride, 2,4-dinitrophenylhydrazine, Hydrazine hydrate, Thermal Reduction, Hydrothermal Reduction, Exfoliation Reduction, Catalytic Reduction, and the green synthesis route for reduction, The reduction of graphene oxide has a wide range of applications, including its use in energy storage devices for Solar cells, Supercapacitors, LIG-based sensors, River Water sensors, Battery, hydrovoltaic generators, OLED Screen, and Graphene Shielding. This review will determine the future of a few applications.

The current study presents a computational fluid dynamics model designed to simulate the isolation of 2D graphene components from their dispersion using a microfiltration hollow fiber membrane unit. The model utilizes Navier-Stokes and mass conservation equations to predict the flow and concentration behaviors in the system, and it employs the resistance-in-series approach to couple the fouling of the non-exfoliated graphites in the dispersion to the model. Specifically, the model accounts for the effects of the concentration polarization and cake formation of the fouling component, resulting in the increment of the transmembrane pressure (TMP) of the system. Additionally, we assumed the wettability of polymeric membrane’s inner wall enhances upon fouling by the flat layered structure material, leading to the reduction of the transmemrabe pressure. This approach demosntrates accurate reproduction of the exceptional experimental TMP behavior corresponding to the fouling of the graphite.

People often make mistakes, so we try to automate every aspect of our lives. Sports is no exception. While just over a decade ago humans were analyzing games, today this is being done by artificial intelligence. Due to rapid development over the past decade, neural networks are now faster, more accurate, and in some areas even better than their human counterparts. In this paper, we present an algorithm that can detect player statistics during an NBA broadcast. It also helps users better understand the game and the use of augmented reality. The algorithm detects players on the court, tracks their movements, and assigns them to their respective teams. Using homography estimation, we transform the players’ positions from a three-dimensional space in the video to a two-dimensional space on the playing field plane. We define a new algorithm that predicts the players’ actions and their statistics. The results show that the proposed method can effectively identify the players, their respective teams, and their positions. It can also analyze their actions with high accuracy.

In this letter, we construct an effective field theory of gravity at large distances. We obtain to the leading order for large distances: a cosmological constant term and a logarithmic term in addition to the usual General Relativistic terms. The novel logarithmic term has important implications in explaining phenomena such as flat galactic rotation curves and stronger gravitational lensing than predicted that are generally attributed to the presence of dark matter.

The increasing popularity of carbon-reinforced concrete (CRC) is attributed to its exceptional tensile properties, low density, no corrosion phenomenon, and remarkable flexibility, allowing it to be easily shaped into various forms. This research investigates the feasibility of using a special 2D Netzgitterträger (NetzGT) reinforcement system, featuring a net-shaped fabricated textile made of multiple diagonally offset rovings with overlapping edge strands, as a viable alternative to traditional steel reinforcement in concrete beams. This reinforcement is manufactured from carbon rovings with three different diagonal angles of 50⁰, 60⁰, and 70⁰ respectively. Laboratory experiments were conducted to assess the mechanical behavior of beams reinforced with the 2D NetzGT reinforcement. Bending and shear tests were performed on beams with varying numbers of overlapped edge roving and roving angles to evaluate the tensile capacity and failure characteristics of beams. The increase in the number of overlapped edge rovings led to a noticeable increase in the maximum tensile force. Tensile tests on strands were also performed with the increasing number of overlapped rovings to analyze their tensile strength. Additionally, single yarn pull-out tests were also conducted to examine the influence of the roving angle on the bond strength between the carbon textile roving and the concrete matrix

Background. Currently, most of the research in breast cancer has been carried out in conventional two-dimensional (2D) cell culture due to its practical benefits, however, the three-dimensional (3D) cell culture is becoming the model of choice in cancer research because it allows cell-cell and cell-extracellular matrix (ECM) interactions, mimicking the native microenvironment of tumors in vivo. Methods. in this work, we evaluated the effect of 3D cell organization on the expression pattern of miRNAs (by Small-RNAseq) and mRNAs (by microarrays) in the breast cancer SKBR3 cell line and analyzed the biological processes and signaling pathways regulated by the differ-entially expressed protein-coding genes (DE-mRNAs) and miRNAs (DE-microRNAs) found in the organoids. Results. We obtained well-defined cell-aggregated organoids with a grape cluster-like morphology with a size up to 9.2×105 μm3. The transcriptomic assays showed that cell growth in organoids significantly affected (all p < 0.01) the gene expression patterns of both, miRNAs and mRNAs, finding 20 upregulated and 19 downregulated DE-microRNAs, as well as 49 upregulated and 123 downregulated DE-mRNAs. In silico analysis showed that a subset of 11 upregulated DE-microRNAs target 70 downregulated DE-mRNAs. These genes are involved in 150 gene on-tology (GO) biological processes such as regulation of cell morphogenesis, regulation of cell shape, regulation of canonical Wnt signaling pathway, morphogenesis of epithelium, regulation of cy-toskeleton organization, as well as in the MAPK and AGE-RAGE signaling KEGG-pathways. In-terestingly, hsa-mir-122-5p (Fold Change (FC)=15.4), hsa-mir-369-3p (FC=11.4), and hsa-mir-10b-5p (FC=20.1) regulated up to the 81 % of the 70 downregulated DE-mRNAs. Conclu-sion, the organotypic 3D cell-organization architecture of breast cancer SKBR3 cells impacts the expression pattern of miRNAs-mRNAs network mainly through overexpression of hsa-mir-122-5p, hsa-mir-369-3p, and hsa-mir-10b-5p. All these findings suggest that the interaction between cell-cell and cell-ECM as well as the change in the culture architecture impacts gene ex-pression, and therefore, support the pertinence of migrating breast cancer research from conven-tional cultures to 3D models.

Still, the most common in vitro model for absorption, distribution, metabolism and excretion (ADME) purposes is the Caco-2 cell line. However, clear differences in gene- and protein expression towards the small intestine and an at best fair prediction accuracy of intestinal drug absorption restrict the usefulness as model for intestinal epithelial cells. To overcome these limitations, we evaluated a panel of low-passaged patient-derived colorectal cancer cell lines of the HROC collection concerning similarities to small intestinal epithelial cells and their potential to predict intestinal drug absorption. After initial screen of a larger panel, ten cell lines with confluent outgrowth and long-lasting barrier forming potential were further characterized in close detail. Tight junctional complexes and microvilli structures were detected in all lines, differentiated epithelial cells were abundant in 7/10. All lines expressed multiple transporter molecules, with expression levels in three lines being close to those of small intestinal epithelial cells. Compared to the Caco-2 model, three HROC lines demonstrated both higher similarity to jejunal epithelial tissue cells and higher regulatory potential of relevant drug transporters. In sum, these lines would be better suited human small intestinal epithelium models for basic and translational research; especially for ADME studies.

Dynamic adaptive video streaming over HTTP (DASH) plays a crucial role in video transmission across networks. Traditional adaptive bitrate (ABR) algorithms adjust the quality of video segments based on network conditions and buffer occupancy. However, these algorithms rely on fixed rules within a complex environment, making it challenging to achieve optimal decisions considering the overall context. In this paper, we propose a novel Deep Reinforcement Learning-based approach for streaming DASH, focusing on maintaining consistent perceived video quality throughout the streaming session to enhance user experience. Our approach optimizes the Quality of Experience (QoE) by dynamically controlling the quality distance factor between consecutive video segments. We evaluate this approach through a simulation model that encompasses diverse wireless network environments and various video sequences. Additionally, we compare our proposed approach with state-of-the-art methods. The experimental results demonstrate significant improvements in QoE, ensuring users enjoy stable, high-quality video streaming sessions.

As a rapidly expanding family of two-dimensional (2D) materials, MXenes have recently gained considerable attention due to their appealing properties. Here, by developing a solution-based coating method that enables transfer-free and layer-by-layer film coating, we investigate the layer-dependent nonlinear optical absorption of Ti₃C₂T_x films ‒ an important member of the MXene family. By using the Z-scan technique, we characterize the nonlinear absorption of the prepared MXene films consisting of different numbers of monolayers. The results show that there is a strong and layer-dependent nonlinear absorption behavior, transitioning from revisable saturable absorption (RSA) to saturable absorption (SA) as the layer number increases from 5 to 30. Notably, the nonlinear absorption coefficient β varies significantly within this range, changing from ~7.13 × 10² cm/GW to ~-2.69 × 10² cm/GW. We also characterize the power-dependent nonlinear absorption of the MXene films at various incident laser intensities, and a decreasing trend in β is observed for increasing laser intensity. These results reveal the intriguing layer-dependent nonlinear optical properties of 2D MXene films, highlighting their versatility and potential for implementing high-performance nonlinear photonic devices.

Background: Swimming and, specifically, front crawl, can be included among the "overhead" sports. Overhead sports are a risk factor for some problems of the musculoskeletal system, especially the shoulder. The aim of the study was assessing the incidence of shoulder and neck pain in a Masters Swimming Team and its correlation with the crawl stroke. Methods: It is an observational study through video-analysis of the stroke and a questionnaire. The participants are 61 athletes of a Master team, whose prevailing training stroke was the front crawl were selected for the present study. Their stroke was analyzed during training by a go-pro camera mounted on a sliding trolley on a track, evaluating with their trainer their technical defects. A questionnaire about frequency of shoulder and neck pain during the last five years was administered to all the participants at the study. Results: From the questionnaire, 45 and 55 out of 61 athletes had suffered from shoulder pain and cervical pain, respectively. Both types of pain were correlated with the weekly swimming volume. The swimmers with hyperflexion of the wrist and prolonged internal rotation in the pulling phase had shoulder problems. Those who suffered from current shoulder pain reduced the underwater time. The four swimmers with an excessive body roll during breathing and those who kept their heads extended, reported cervical pain. Conclusions: Shoulder and neck pain could be prevented with the correction of specific technical errors in crawl stroke.

(1) Background: Surgical phases form the basic building blocks for surgical skill assessment, feedback and teaching. Phase duration itself and its correlation to clinical parameters has not yet been investigated. Novel commercial platforms provide phase indications but have not been assessed for accuracy yet. (2) Methods: We assess 100 robot-assisted partial nephrectomy videos for phase duration based on previously defined proficiency metrics. We develop an annotation framework and subsequently compare our annotations to an existing commercial solution (Touch Surgery, Medtronic™). We subsequently explore clinical correlations between phase durations and peri-operative parameters. (3) Results: Objective and uniform phase assessment requires precise definitions derived from an iterative revision process. Comparison to a commercial solution shows large differences in definitions across phases. BMI and duration of renal tumor identification correlate positively, as well as tumor complexity and both tumor excision and renorraphy duration. (4) Conclusions: Surgical phase duration can be correlated with certain clinical outcomes. Further research should investigate if retrieved correlations are also clinically meaningful. This requires increasing dataset sizes and facilitation through intelligent computer vision algorithms. Commercial platforms can facilitate this dataset expansion and help unlock the full potential, provided the disclosure of phase annotation details.

Although wireless capsule endoscopy (WCE) detects small bowel diseases effectively, it has some limitations. For example, the reading process can be time-consuming due to the numerous images generated per case, and lesion detection accuracy may rely on the operators' skills and experiences. Hence, many researchers have recently developed deep learning-based methods to address these limitations. However, they tend to select only a portion of the images from a given WCE video and analyze each image individually. In this study, we note that more information can be extracted from the unused frames and temporal relations of sequential frames. Specifically, to increase the accuracy of lesion detection without depending on experts' frame selection skills, we suggest using whole video frames as the input to the deep-learning system. Thus, we propose a new Transformer-based neural encoder that takes the entire video as the input, exploiting the power of the Transformer to extract long-term global correlation within and between the input frames. Subsequently, we can capture the temporal context of the input frames and the attentional features within a frame. Tests on benchmark datasets of four WCE videos showed 95.1% sensitivity and 83.4% sensitivity. These results may significantly advance automated lesion detection techniques for WCE images. Our code is available at https://github.com/syupoh/VWCE-Net.git.

Two-dimensional layered coordination polymers based on the hetero-substituted 3-chloro-6-cyano-2,5-dihydroxybenzoquinone ligand, hereafter ClCNAn2- anilate, and LnIII ions (Tb and Eu) are reported. Compounds 1, 2, formulated as Ln2(ClCNAn)3(DMSO)6 (LnIII = Tb, 1; Eu, 2) and their related intermediates 1’ and 2’, formulated as Ln2(ClCNAn)3(H2O)x.yH2O (x+y likely = 12, Ln = Tb, 1’; and Eu, 2’) were prepared by a conventional one-pot reaction (the latter) and recrystallized from DMSO solvent (the former). Polyhydrated intermediates 1’ and 2’ show very similar XRPD patterns, while, despite their common stoichiometry, 1 and 2 are not isostructural. 1 consists of a 2D coordination framework of 3,6 topology, where [Tb(DMSO)3]3+ moieties are bridged by three bis-chelating ClCNAn2- ligands, forming distorted hexagons. Ultrathin nanosheets of 1 were obtained by exfoliation, via liquid assisted sonication method and characterized by atomic force microscopy, confirming the 2D nature of 1. The crystal structure of 2, still showing the presence of 2D sheets with “hexagonal” mesh and a common (3,6) connectivity, is based onto flat, non-corrugated slabs. Indeed, at a larger scale, the different “rectangular tiles” show a clear roofing in 1, which is totally absent in 2. The magnetic behavior of 1 very likely indicates depopulation of the highest crystal-field levels, as expected for TbIII compounds.

The falling cost of cameras, the advancement of AI based computer vision algorithms, and powerful hardware accelerators for deep learning have enabled wide-spread deployment of surveillance cameras with the ability to automatically analyze streaming video feeds to detect events of interest. While streaming video analytics is currently largely done in the cloud, edge computing has emerged as a pivotal component due to its advantages of low latency, reduced bandwidth, and enhanced privacy. However, a distinct gap persists between the state-of-the-art computer vision algorithms, and successful practical implementation of edge-based streaming video analytics systems. This paper presents a comprehensive review of more than 30 research papers published over the last 6 years on edge video analytics systems. The papers are analyzed across 17 distinct dimensions. Unlike prior reviews, we examine each system holistically, identifying their strengths and weaknesses in diverse implementations. Our findings suggest that certain critical topics necessary for the practical realization of edge video analytics systems are not sufficiently addressed in current research. Based on these observations, we propose research trajectories across short, medium, and long term horizons. Additionally, we explore trending topics in other computing areas that can significantly impact the field of edge video analytics.

Video capsule endoscopy (VCE) is increasingly used to decrease the discomfort among patients owing to its small size. However, VCE has a major drawback of not having narrow band imaging (NBI) functionality. The current VCE has the traditional white light imaging (WLI) only, which has poor performance in the computer-aided detection (CAD) of different types of cancer compared with NBI. Specific cancers, such as esophageal cancer (EC), do not exhibit any early biomarkers, making their early detection difficult. In most cases, the symptoms are unnoticeable, and EC is diagnosed only in later stages, making its 5-year survival rate below 20% on an average. NBI filters provide particular wavelengths that increase the contrast and enhance certain features of the mucosa, thereby enabling early identification of EC. However, VCE does not have a slot for NBI functionality because its size cannot be increased. Hence, NBI image conversion from WLI can be achieved only in post-processing at present. In this study, a complete arithmetic assessment of the decorrelated color space was conducted to generate NBI images from WLI images for VCE of the esophagus. Three parameters, namely, structural similarity index metric (SSIM), entropy, and peak-signal-to-noise ratio (PSNR), were used to asses the simulated NBI images. Results show the good performance of the NBI image reproduction method, with SSIM, entropy difference, and PSNR values of 93.215%, 4.360, and 28.064 dB, respectively.

Image compression is a top priority today due to the need for faster encoding and decoding. To achieve this, the present study has proposed the use of Canonical Huffman Coding (CHC) as an entropy coder, which has a lower decoding time complexity than binary Huffman codes. For image compression, combining of the Discrete Wavelet Transform (DWT) and CHC with Principal Component Analysis (PCA) has been recommended. The lossy method has been introduced by using PCA, followed by DWT and CHC to enhance compression efficiency. By using DWT and CHC instead of PCA alone, the reconstructed image has been found to have a better peak signal-to-noise ratio (PSNR) value. This study has developed a hybrid compression model combining the advantages of DWT, CHC and PCA. With the increasing use of image data, better image compression techniques are necessary for efficient use of storage space. The proposed technique has achieved up to 60% compression while maintaining high visual quality. This method has also outperformed the currently available techniques in terms of both PSNR (in dB) and bit-per-pixel (bpp) scores. This approach has been tested on various color images, including Peppers 512×512 and Couple 256×256, showing improvement by 17 dB and 22 dB, respectively, while reducing bpp by 0.56 and 0.10, respectively. For grayscale images, i.e., Lena 512×512 and Boat 256×256, the proposed method has shown an improvement by 5 dB and 8 dB, respectively, with a decrease of 0.02 bpp in both cases.

The emergence of new methodologies and tools for digitizing objects belonging to the Cultural Heritage (CH) changed the paradigms adopted so far. Traditionally, the process to acquire artifacts required specialized and often costly equipment tailored to specific purposes. However, the development of more generalized, adaptable, and affordable tools led to novel approaches. This manuscript provides a glimpse into the evolving landscape of custom-made tools for digital documentation, both hardware and software, and their transformative impact on the digitization techniques, built to meet requirements of specific case studies, including ancient drawings, manuscripts, paintings, and museum objects. The advent of self-built instruments has revolutionized the way professionals work today, by leveraging a new generation of low-cost, adaptable gears, leading to unprecedented flexibility and efficiency, while facilitating the capture of high-quality digital representations of objects with minimal damage and preserving their integrity. The outcomes of instruments and tools specifically produced for the contexts described in this paper highlight their potential for promoting interdisciplinary collaboration, facilitating scholarly research, enhancing conservation efforts, and fostering cultural exchange. Ultimately, this research contributes to illustrate how custom software, in combination with recent devices such as smartphones and 3D printers, underscores the importance of adopting these innovative approaches to generate an ecosystem of tools and methods able to preserve, document, and promote the richness of our collective past for future generations.

Considering the controversial benefits of video-assisted thoracoscopic surgery (VATS), we intended to evaluate the impact of surgical approach on cardiac function after lung resection using myocardial work analysis. Echocardiographic data of 45 patients (25 thoracotomy vs. 20 VATS) were retrospectively analyzed. All patients underwent transthoracic echocardiography (TTE) 2 weeks before and after surgery, including two-dimensional speckle tracking and tissue doppler imaging. No notable changes in left ventricular (LV) function, assessed mainly using the LV global longitudinal strain (GLS), global myocardial work index (GMWI), and global work efficiency (GWE), were observed. Right ventricular (RV) TTE values, including tricuspid annular plane systolic excursion (TAPSE), tricuspid annular systolic velocity (TASV), and RV free-wall GLS (RVFWGLS), indicated greater RV function impairment in the thoracotomy group than in the VATS group [TAPSE (mm): 17.90 ± 3.80 vs. 20.60 ± 3.50, p &lt; 0.018; TASV (cm/s): 12.40 ± 2.90 vs. 14.60 ± 2.50, p &lt; 0.010; RVFWGLS (%): −11.50 ± 8.50 vs. −17.50 ± 9.70, p &lt; 0.033), respectively]. Unlike RV function, LV function remained preserved after lung resection. The thoracotomy group exhibited greater RV function impairment than did the VATS group. Further studies should evaluate the long-term impact of surgical approach on cardiac function.

One of the most important problems, which public health is called to face, is obesity. The World Health Organization (WHO) underlines that worldwide more than 380 million of overweight or obese children and adolescents exist. Although obesity is a multifactorial disease, excessive use of the screen seems to act in a way that affects obesity. The purpose of this systematic literature review is to study of the major problem, obesity in teenagers and its association with the hours of entertainment(referring to excessive hours of television use and viewing, video games and social media).In the present systematic literature review was carried out search for sources, through the scientific databases PubMed, ScienceDirect, and Scopus for the period from 2010 to 2022.This systematic review provides public health evidence regarding the positive association of excessive screen time and of obesity and overweight in adolescents.

In the Versatile Video Coding (VVC) standard, affine motion models have been applied to enhance the resolution of complex motion patterns. However, due to the high computational complexity involved in affine motion estimation, real-time video processing applications face significant challenges. This paper focuses on optimizing affine motion estimation algorithms in the VVC environment and proposes a fast gradient iterative algorithm based on edge detection for efficient computation. Firstly, we establish judging conditions during the construction of affine motion candidate lists to streamline the redundant judging process. Secondly, we employ the Canny edge detection method for gradient assessment in the affine motion estimation process, thereby enhancing the iteration speed of affine motion vectors. Experimental results demonstrate that our affine motion estimation algorithm reduces encoding time by approximately 15%-35% while maintaining video bitrate and quality.

Direct laryngoscope and videolaryngoscope are the dominant endotracheal intubation tools. Styletubation technique (using a video-assisted intubating stylet) has shown its advantages regarding in short intubation time, high success rate, less stimulation, and operator’s satisfaction. The learning curve can be steep but easy to overcome if the technical pitfalls could be avoided. Conditions make styletubation challenging include secretions/blood, short/stiff neck, restricted mouth opening and cervical spine mobility, anatomical abnormalities over head and neck regions, and obesity, etc. In this clinical report, we present the effectiveness and efficiency of routine use of the styletubation for tracheal intubation in a super-super obese patient (BMI 103 kg/m2) undergoing bariatric surgery with laparoscopic sleeve gastrectomy.

Powerful emitters of the ultraviolet C (UVC) light in the wavelength range of 230-280nm are necessary for the development of effective and safe optical disinfection technologies, high-sensitive optical spectroscopy and non-line-of-sight optical communication. This review considers such UVC-emitters with electron-beam pumping of heterostructures with quantum wells in the (Al,Ga)N material system. The important advantages of these emitters include the absence of the critical problem of p-type doping and the possibility of achieving record (up to several tens of watts for peak values) output optical power values in the UVC range. The review consistently considers about a decade of world experience in the implementation of various UV emitters with various types of thermionic, field-emission, and plasma-cathode electron guns (sources) used to excite various designs of active (light-emitting) regions in heterostructures with quantum wells AlxGa1-xN/AlyGa1-yN (x = 0 − 0.5, y = 0.6 − 1) fabricated either by metal-organic chemical vapor deposition or by plasma-activated molecular beam epitaxy. Special attention is paid to the production of heterostructures with multiple quantum wells/two-dimensional(2D) quantum disks GaN/AlN with a monolayer (1ML ~ 0.25nm) thickness, which ensures a high internal quantum efficiency of radiative recombination in the UVC range, low elastic stresses in heterostructures, and a high output UVC-optical powers.

This paper presents results of the magnetic dynamics study (the microwave power absorptions at the fixed frequencies, during magnetic field sweeping) in samples of Y3Fe5O12 single crystals in the form of plates and spheres of various sizes, at frequencies exceeding 30 GHz, in magnetic fields up to 18 kOe, at room temperature and T=77 K. It was found, that in this case, the inhomogeneity’s of the magnetic state manifested itself in the Y3Fe5O12 samples in as 2D local phase separation regions. These 2D phase separation regions formed inside domain walls representing superlattices with size’s 700 – 900 Å. Landau diamagnetism or de Haas van Alphen oscillations observed in the 2D phase separation regions at room temperature and T=77 K, depending on the shape and size of the studied plates and spheres.

Single particle analysis with cryogenic electron microscopy (cryo-EM) can determine high resolution structures of macromolecular assemblies. To reconstruct final three-dimension(3D) density map, a reliable initial model is essential and ab-initio reconstruction usually can avoid model bias. The grand challenge for ab-initio reconstruction is to alignment two-dimension(2D) low signal-to-noise ratio(SNR) of particle images with random and unknown parameters. Here we formulate a fast ab initio reconstruction method(named AlignFM) based on Fourier Mellin transform and particle-swarm intelligence optimization(PSO) algorithm. It enables simultaneous 2D alignment and 3D refinement, which can fast generate a reliable 3D map. After experiments on several real datasets. AlignFM shows high performance on fast ab initio reconstruction with a small amount of data.

Compared to other 2D materials, MBenes are at an early stage in both experimental and theoretical approaches. However, the wide range of possible 2D structures leads to novel and challenging properties and their consequent applications. From all the possible stoichiometries, we have performed a theoretical study of orthorhombic and hexagonal M2B2 MBenes in the framework of the Density Functional Theory. We have found that both symmetries of Cr2B2, Fe2B2, and Zr2B2 show a metallic behavior and could be grown under certain conditions, as they are demonstrated to be dynamically stable. Moreover, the values of the magnetic moment, in specific ferromagnetic cases exceeding 2.5 μB/M2B2, make them suitable as robust 2D magnets. All our findings represent an important step in the understanding of MBenes and open several windows to future research in fields like energy conversion and storage, sensing, catalysis, biochemistry, or nanotechnology, among others.

Previous research on video game player aggression has focused on violent content, while recent studies have examined competitive factors. Few research has examined the solely impacts of competitive factors in video games without violent content on aggression, and it is still unknown what neurological processes of these effects. The present study is the first to examine the the electrophysiological characteristics of short-term competitive video game exposure and aggression. Thirty-five participants played a video game in either competitive or solo mode for 15 minutes, followed by an ERP experiment based on the Oddball paradigm and the hot sauce paradigm to measure aggressive behavior. Results showed that playing competitive game mode was associated with faster judgment to aggressive words, larger P300 amplitudes, and selection of more chili powder. The P300 amplitude partially mediated the relationship between competitive game exposure and aggressive behavior. These findings support the general aggression model.

Nowadays, the European Union and the governments of the different countries have focused on the development of the Sustainable Development Goals (SDG) and the 2030 agenda, something that has been translated into education itself. Video Games, Gamification, and Game Based Learning have become different strategies and tools to enhance the learning process and some of the growing approaches used by teachers to develop sustainable education in the classrooms. This research aims to analyze the characteristics to promote sustainability in education using games and technology, specifically its learning benefits for Higher Education. A systematic review of the literature was conducted following the PRISMA methodology. At first, 2025 documents were found which, after the filtering phases, the number of articles has been reduced to nine, which subsequently were analyzed in depth. The results indicated that among the benefits of the use of games mediated by technologies are the following: it favors education for sustainability and it promotes the educational inclusion and the work of various social skills such as collaborative and cooperative work. Also, showed an increase of the number of publications between 2019 and 2023, reflecting the growing interest in the topic. However, there are some research gap in this field.

The paper explores the potential of a low-cost advanced video-based technique for the assessment of structural damage induced to buildings by seismic loading. A low-cost high-speed video camera was utilized for motion magnification (MM) processing of footages of a two-story reinforced concrete frame building subjected to shaking table tests. The damage after seismic loading was estimated by analyzing the dynamic behavior (i.e. in terms of modal parameters) and the structural deformations of the building in the MM videos. The results by MM were compared for method validation to damage assessment obtained by the analyses of conventional accelerometers and high-precision optical markers tracked by a passive 3D motion capture system. Also, 3D laser scanning to obtain an accurate survey of the building geometry before and after the seismic tests was carried out. In particular, accelerometers were also processed and analyzed by using several stationary and non-stationary techniques with the aim to analyze the linear behavior of the undamaged structure and the nonlinear structural behavior during damaging shaking table tests. The proposed MM-based procedure provided accurate estimate of the main modal frequency and the damage location through the analysis of modal shapes, which were confirmed by advanced analyses of accelerometric data.

Optical parametric amplification (OPA) represents a powerful solution to achieve broadband amplification in wavelength ranges beyond the scope of conventional gain media, for generating high-power optical pulses, optical microcombs, entangled photon pairs and a wide range of other applications. Here, we demonstrate optical parametric amplifiers based on silicon nitride (Si₃N₄) waveguides integrated with two-dimensional (2D) layered graphene oxide (GO) films. We achieve precise control over the thickness, length, and position of the GO films using a transfer-free, layer-by-layer coating method combined with accurate window opening in the chip cladding using photolithography. Detailed OPA measurements with a pulsed pump for the fabricated devices with different GO film thicknesses and lengths show a maximum parametric gain of ~24.0 dB, representing a ~12.2 dB improvement relative to the device without GO. We perform a theoretical analysis of the device performance, achieving good agreement with experiment and showing that there is substantial room for further improvement. This work demonstrates a new way of achieving high photonic integrated OPA performance by incorporating 2D materials.

With the proliferating of video surveillance system deployment and related applications, real-time video analysis is very critical to achieve intelligent monitoring, autonomous driving, etc. It is non-trivial to achieve high accuracy and low latency video stream analysis through the traditional cloud computing. In this paper, we propose a non-orthogonal multiple access (NOMA) based edge real-time video analysis framework with one edge server (ES) and multiple user equipments (UEs). A cost minimization problem composed of delay, energy and accuracy is formulated to improve the QoE of UEs. In order to efficiently solve this problem, we propose the joint video frame resolution scaling, task offloading, and resource allocation algorithm based on the Deep Q-Learning Network (JVFRS-TO-RA-DQN), which effectively overcomes the sparsity of the single-layer reward function and accelerates the training convergence speed. JVFRS-TO-RA-DQN consists of two DQN networks to reduce the curse of dimension, which respectively select the offloading and resource allocation action, the resolution scaling action. Experimental results show that JVFRS-TO-RA-DQN can effectively reduce the cost of transmission and computation, and have better performance in convergence compared to other baseline.

Two-dimensional (2D) materials have been a research hot topic in the passed decades due to their unique and fascinating properties. Among them, mechanical properties plays an important role for their application. However, there lacks an effective tool for high-throughput calculating, analysing and visualizing the mechanical properties of 2D materials. In this work, we present, mech2d package, a highly automated toolkit for calculating and analysing second-order elastic constants (SOECs) tensor and relevant properties of 2D materials with considering their symmetry. In the mech2d, the SOECs can be fitted by both strain-energy and stress-strain approach, where the energy or strain can be calculated by first-principles engine, such as VASP. As a key feature, the mech2d package can automatically submit and collect the tasks from local or remote machine with robust fault-tolerant ability, make it suitable for high-throughput calculation. The present code has been validated by several common 2D materials, including graphene, black phosphorene, GeSe2 and so on.

Abstract— In this paper, degradation effects such as the self-heating effect and the DIBL effect in 2D-MoS2-based MOSFETs are investigated through simulations. These are transistors with Al2O3 and HfO2 as the gate oxide and SiO2 and HfO2 as the back oxide (BOX). The self-heating effect (SHE) is simulated using the thermodynamic transport model. The dependence of the DIBL effect (Drain Induced Barrier Lowering) and the lattice temperature in the center of the channel on the gate length for transistors with different gate oxide and BOX materials is considered. Transistors are considered where the channel is fully and partially (just below the gate) covered by gate oxide. It is shown that the transistors with Al2O3 as gate oxide and SiO2 as BOX materials have higher immunity to DIBL effect and transistors with HfO2 as gate oxide and HfO2 as BOX materials have higher immunity to SHE.

One in 12 babies is born with a rare genetic disease. Sadly, most cases are undetected until later age, missing time for early treatment and opportunity to prevent complications. Humanity has entered a new era where Big Data collected by governments, including 2D and 3D facial scans, are available. Many rare genetic diseases can be identified by artificial intelligence (AI) analysis of the facial photo. Phenotyping AI utilizations facilitate comprehensive and accurate genetic evaluations. AI processing of this Big Data to identify rare genetic diseases could bring unimaginable benefits to healthcare, although this would be a questionable step in terms of citizen privacy and could lead to future "Orwellian" ramifications with government abuse. Going forward, a balance must be found between protecting the privacy of citizens and the enticing use of AI for their health risks and cost savings through prevention. The unimaginable potential of AI early diagnostics from facial photos also raises various ethical and legal concerns. This paper presents concept, protentional methods and legal and other limitations within EU legal framework in contrast with potential benefits. This paper is focused on AI utilization to early diagnostic of rare genetic diseases. Shift of paradigm in the screening for rare genetic diseases in population with AI face analysis is expected to have a significant impact. The potential of AI algorithms utilizations similar to face2gene app in general population or systematically on Big governmental datasets recording facial traits changes in time can have significant impact on public health but at the same time give raise to profound concern as violation of one’s privacy.

The standard treatment for early-stage lung cancer is complete tumor excision by limited resection of the lung. Pre-operative localization is used before video-assisted thoracoscopic surgery (VATS) to improve the accuracy of pulmonary nodule excision. However, lung atelectasis and hypoxia resulting from controlling apnea during the localization procedure may affect the localization accuracy. Pre-procedural pulmonary recruitment may improve respiratory mechanics and oxygenation during localization. In this study, we investigated the potential benefits of pre-localization pulmonary recruitment prior to pulmonary ground-glass nodule localization in a hybrid operating room. We hypothesized that pre-localization pulmonary recruitment would increase localization accuracy, improve oxygenation, and prevent the need for re-inflation during the localization procedure. We retrospectively enrolled patients with multiple pulmonary nodule localizations before surgical intervention in our hybrid operating room. We compared localization accuracies between patients who had undergone pre-procedure pulmonary recruitment and patients who had not. Saturation, re-inflation rate, apnea time, procedure-related pneumothorax, and procedure time were also recorded as secondary outcomes. Patients who had undergone pre-procedure recruitment had better saturation, shorter procedure time, and higher localization accuracy. The pre-procedure pulmonary recruitment maneuver was effective in increasing regional lung ventilation, leading to improved oxygenation and localization accuracy.

Lithium-sulfur (Li-S) battery has been regarded as an important candidate for the next-generation energy storage system due to its high theoretical capacity (1675 mAh g-1) and high energy density (2600 Wh kg-1). However, the shuttle effect of polysulfide seriously affects the cycling stability of the Li-S battery. Here, a novel Fe3C decorated folic acid-derived graphene-like N-doped carbon sheet (Fe3C@N-CS) was successfully prepared as the polysulfide catalyst to modify the separator of Li-S battery. The porous layered structures can successfully capture polysulfide as a physical barrier, and the encapsulated Fe3C catalyst can effectively trap and catalyze the conversion of polysulfide, thus accelerating the redox reaction kinetics. Together with the highly conductive networks, the cell with Fe3C@N-CS modified separator evinces superior cycling stability with 0.06% capacity decay per cycle at 1 C rate over 500 cycles and excellent specific capacity with an initial capacity of 1260 mAh g-1 at 0.2 C. Besides, at a high sulfur loading of 4.0 mg cm-2, the batteries also express superb cycle stability and rate performance.

In a previous companion study, satellite data were used to describe peculiar characteristics of ocean surface wave fields, generated by two extra-tropical cyclones (ETCs) rapidly propagating in the North Atlantic. Based on a 2D parametric wave model, further details are now provided to analyse and interpret the spatio-temporal evolution of ETC very intense generated waves. Significant wave height and wavelength values are shown to reach extreme values, 18 m and 500 m, respectively. Resulting energetic swell systems waves then radiate in the whole eastern part of North Atlantic, and more particularly in the Norwegian sea region. Moving to higher latitudes, wind forcing characteristics of ETCs evolve, with the shape of the wind field changing from quasi-cyclonic to "air jets/Icelandic lows". In this paper, the resulting swell generation and propagation, after the deformation of an individual ETC, are studied, as well. Confirmed with comparisons with multi-satellite observations, the application of the parametric-2D wave-ray model is demonstrated to provide robust and highly detailed information on wave generation under very complex wind regime changes.

In recent decades, the Variational AutoEncoder (VAE) model has shown good potential and capabilities in image generation and dimensionality reduction. The combination of VAE and various machine learning frameworks has also worked effectively in different daily life applications, however its possibility and effectiveness in modern game design has seldom been explored nor assessed. The use of its feature extractor for data clustering was minimally discussed in literature neither. This paper first attempts to explore different mathematical properties of the VAE model, in particular, the theoretical framework of the encoding and decoding processes, the possible achievable lower bound and loss functions of different applications; then applies the established VAE model into generating new game levels within two well-known game settings; as well as validating the effectiveness of its data clustering mechanism with the aid of the Modified National Institute of Standards and Technology (MNIST) database. Respective statistical metrics and assessments were also utilized for evaluating the performance of the proposed VAE model in aforementioned case studies. Based on the statistical and spatial results, several potential drawbacks and future enhancement of the established model were outlined, with the aim of maximizing the strengths and advantages of VAE for future game design tasks and relevant industrial missions.

Non-invasive heart rate (HR) monitoring is important in clinical settings as it plays a critical role in diagnosing a range of health conditions and assessing well-being. Presently, the gold standards for HR measurement are all based on sensors which require skin contact. Apart from inconvenience, contact sensors have proven problematic in certain scenarios – they cannot be used when mechanical isolation of the patient is imperative (burn victims, patients with shaky hands and feet), cause skin damage to premature babies in the ICU and increase the risk of spreading infections. Non-contact HR monitoring using a camera has been recently shown to be a viable alternative. It is now possible to record cardiac-synchronous blood volume variations from facial videos of human subjects under ambient lighting. These variations produce corresponding changes in skin reflectance which can be extracted as a raw reflectance photoplethysmography (rPPG) signal and processed to reveal HR. In this project, an algorithmic framework for webcam-based HR detection was successfully implemented in MATLAB. The investigation was based on 100 self-captured videos (dark-skinned subject) and 48 videos (from 12 subjects, all but one fair-skinned) obtained from COHFACE – an online database of facial videos and corresponding physiological signals. While the performance metrics (mean error, SNR) of the rPPG signals obtained from the self-captured videos were poor (best case mean error of 22%), they were good enough to demonstrate the success of the implementation. The poor results were primarily imputed to skin tone as rPPG SNR is known to be particularly low for dark tones. The results of the COHFACE videos were far superior, with mean error ranging from 3% to 15% (among 8 different rPPG signals) and 0% to 9% under ambient and dedicated lighting, respectively. This investigation sets the foundation for future research directed at optimizing rPPG performance metrics for dark-skinned subjects.

The continuously developing project aims to build an informatics system enabling analysis of spatial and temporal parameters of movement activities occurring in the sport of speed climbing. The monitoring system (climbing information speed system – CISS) is to be used for conducting comprehensive scientific research in the field of speed climbing. The system enables the evaluation of the training process of climbers at various levels of competition. The study analysis was based on video. The video recording with a camera positioned at a short distance (10 m) from the wall. The marker was positioned closest to the centre of mass (gravity) BMC. Results: development of a system for data collection and analysis of the climbing run based on video recording (application of the Kanade-Lucas-Tomasi (KLT) algorithm). Our results showed that used devices can measure a wide range of specific internal and external variables during speed climbing. Some of the analyzed parameters were significantly correlated with speed climbing time. These results could be a theoretical basis for future research and for training program’s preparation.

Artificial intelligence’s rapid advancement has enabled various applications, including intelligent video surveillance systems, assisted living, and human-computer interaction. These applications often require one core task: video-based human action recognition. Research in human video-based human action recognition is vast and ongoing, making it difficult to assess the full scope of available methods and current trends. This survey provides an in-depth exploration of the vision-based human action recognition field, comprehensively offering the available techniques and their evolution, highlighting the cutting-edge ideas driving its development. We also analyze the most used keywords in research papers over the past years to identify trends and predict possible future directions. Hence, this concise survey helps researchers understand the breadth of existing approaches, evaluate current research trends, and stay up-to-date on potential developments.

The COVID19 pandemic had a major impact on emergency medical communication centres (EMCC). A live video facility was made available to second-line physicians in an EMCC with a first-line paramedic to receive emergency calls. The objective of this study was to measure the contribution of live video to remote medical triage. The single-centre retrospective study included all telephone assessments of patients with suspected COVID19 symptoms from 01.04.2020 to 30.04.2021 in Geneva, Switzerland. The organisation of the EMCC and the characteristics of patients who called the two emergency lines (official emergency number and COVID19 number) with suspected COVID19 symptoms were described. A prospective web-based survey of physicians was conducted during the same period to measure the indications, limitations and impact of live video on their decisions. 8,957 patients were included. 2,157 (48.0%) of the 4,493 patients assessed on the official emergency number had dyspnoea. 4,045 (90.6%) of 4,464 patients assessed on the COVID19 number had flu-like symptoms. 1,798 (20.1%) patients were reassessed remotely by a physician, including 405 (22.5%) with live video, successfully in 315 (77.8%) attempts. The web-based survey (107 forms) showed that physicians used live video to assess mainly the breathing (81.3%) and general condition (78.5%) of patients. They felt that their decision was modified in 75.7% (n=81) of cases, and caught 7 (7.7%) patients in life-threatening emergency. Medical triage decisions for suspected COVID19 patients are strongly influenced by the use of live video.

All-optical signal processing based on nonlinear optical devices is promising for ultrafast information processing in optical communication systems. Recent advances in two-dimensional (2D) layered materials with unique structures and distinctive properties have opened up new avenues for nonlinear optics and the fabrication of related devices with high performance. This paper reviews the recent advances in research on third-order optical nonlinearities of 2D materials, focusing on all-optical processing applications in the optical telecommunications band near 1550 nm. First, we provide an overview of the material properties of different 2D materials. Next, we review different methods for characterizing the third-order optical nonlinearities of 2D materials, including the Z-scan technique, third-harmonic generation (THG) measurement, and hybrid device characterization, together with a summary of the measured n₂ values in the telecommunications band. Finally, the current challenges and future perspectives are discussed.

The past several decades have seen a shift in patient care towards digitalisation, which has ushered in a new era of health care delivery and improved sustainability and resilience of health systems, with positive impacts on both internal and external stakeholders. This study’s aim was to understand the role of digital virtual consultations in improving internal and external stakeholders’ health, as well as wellbeing among hospital doctors. A qualitative research approach was used with semi-structured online interviews administered to hospital doctors. The interviews showed that the doctors viewed digital virtual consultations as supplementary to in-person consultations, and as tools to reduce obstacles related to distance and time. If the necessary infrastructure and technology were in place, doctors would be willing to use these options. Implementing these technologies would improve the medical profession’s flexibility on the one hand; but it might affect doctors’ work–life balance if consultations extended beyond standard working hours.

As a derivative of graphene, graphene oxide (GO) was initially developed by chemists to emulate some of the key properties of graphene, but it was soon recognized as a unique material in its own right, addressing an application space that is not accessible to chemical vapor deposition based materials. Over the past decade, GO has emerged as a new frontier material with tremendous advances in its material fabrication and quality control over its properties. These in turn have led to rapid progress in GO based photonics, electronics, and optoelectronics concepts and devices, evoking new science and paving the way for many technological breakthroughs with exceptional performance. Here, we review the unique fundamental characteristics of GO, its thin film fabrication methods, patterning techniques, and mechanisms for tuning its material properties. This latter capability in particular has enabled novel advanced functional photonic, electronic, and optoelectronic devices. Understanding these insights is essential for designing and tailoring GO properties for state-of-the-art applications including solar energy harvesting, energy storage, medical diagnosis, image displays, and optical communications. We conclude by discussing the open challenges and exciting opportunities of this field, together with future prospects for major technological advancements and breakthroughs.

In recent years, with the development of social media, people are more and more inclined to upload text, pictures and videos on the platform to express their personal emotions, thus the number of short videos is increasing and becoming the first choice for people to socialize. Unlike the traditional way, people can convey their personal emotions and opinions through media other than words, such as video images, etc. for external information. Therefore, the expression and analysis of emotions is not only through text, but also through the analysis of emotional needs in images and videos, and the research scholars have customized products for individual users. Compared with pure text content, video information can more intuitively express users' happiness, anger and sorrow, thus short video-related applications have gained more and more popularity among Internet users in recent years. However, not all short videos on social networking sites can accurately express users' emotions, and related text information can more accurately assist sentiment analysis and thus improve accuracy. However, short video sentiment analysis based on video frame images is inaccurate in some scenarios, such as when expressing tears of joy, the sentiment expressed by the user's facial expression and voice are different, which will cause errors in the analysis of sentiment. As a result, researchers began to consider multimodal sentiment analysis to reduce the impact of the above scenarios on short video sentiment analysis. This paper focuses on proposing a sentiment analysis method for short videos. We first propose a residual attention model to make full use of the information in audio to classify the emotions contained in them. Then the text information in the dataset is classified by feature extraction. The key to extract features from text information is not only to retain the semantic information of the text, but also to explore the potential emotional information in the text, so as to ensure the integrity of the text information features. The experiments show that the sentiment analysis model proposed in this paper is more superior than the baselines.

“A Picture is worth a thousand words”. Given an image, humans are able to deduce various cause-and-effect captions of past, current, and future events beyond the image. The task of visual commonsense generation aims at generating three cause-and-effect captions (1) what needed to happen before, (2) what is the current intent, and (3) what will happen after for a given image. However, such a task is challenging for machines owing to two limitations: existing approaches (1) directly utilize conventional vision-language transformers to learn relationships between input modalities, and (2) ignore relations among target cause-and-effect captions but consider each caption independently. We propose Cause-and-Effect BART (CE-BART) which is based on (1) Structured Graph Reasoner that captures intra- and inter-modality relationships among visual and textual representations, and (2) Cause-and-Effect Generator that generates cause-and-effect captions by considering the causal relations among inferences. We demonstrate the validity of CE-BART on VisualCOMET and AVSD benchmarks. CE-BART achieves SOTA performances on both benchmarks, while extensive ablation study and qualitative analysis demonstrate the performance gain and improved interpretability.

Passive and forced drinking harm was prevalent but less recognized in Chinese adolescents. We educated adolescents on such harm to reduce their intention to drink. Students (n=1244) from 7 secondary schools in Hong Kong participated in a video-based health talk on passive and forced drinking harm. Paired t-test was used to assess their change in knowledge of passive and forced drinking, health and social harm of drinking after the health talk. McNemar's chi-squared test and adjusted multivariable logistic regression (AOR) were used to assess their change in intention to drink and intention to quit. Students were less likely to drink (OR 0.29, 95% CI 0.19-0.42) and more likely to quit drinking (OR 3.50, 1.10-14.6) after the health talk. Increased knowledge of passive drinking was associated with less intention to drink (AOR 0.93, 0.90-0.97), increased knowledge of health harm (adjusted b 0.06, 0.05-0.08), and social harm of drinking (adjusted b 0.12, 0.10-0.16). Similar associations were observed in forced drinking (intention to drink: AOR 0.87, 0.79-0.96; health harm: adjusted b 0.16, 0.12-0.19; social harm: adjusted b 0.36, 0.28-0.43). We showed preliminary evidence that the health talk on passive and forced drinking reduced the intention to drink in adolescents.