Endocrine disrupting compounds (EDCs) are contaminants with estrogenic or androgenic activity that negatively impact human and animal communities. These compounds have become one of the significant concerns for wastewater treatment in recent decades. Several studies have evaluated EDC removal methods from wastewater across the globe including the United Kingdom (UK). Accordingly, the current study reviews EDC removal methods from municipal/domestic wastewater in the United Kingdom (UK) for the period of 2010–2017. The research highlights that despite the relative efficacy of existing chemical and physical methods for removing certain EDCs from wastewater there is emerging evidence supporting the need for more widespread application of nature-based and biological approaches, particularly the use of biofilms. The analysis reveals that there have been relatively few research studies on EDC removal methods have been carried out in the UK in the 2010–2017 period and none of the research focused on EDC removal using biofilms. Finally, this review suggests that more research is needed to remove EDCs, particularly through the application of biofilms, from municipal wastewater in current scenarios.

Water quality assessment in pastoral of Tibetan Plateau, which is water sources for about 40% of world's population and the runoff-yield area of Yellow rivers, is very important. In this paper, Xiahe county which belongs to Tibetan Plateau pastoral was investigated. Six parameters(via, chloride, COD, ammonia nitrogen, nitrate, fluoride, sulfate) were selected to assess the water quality and health degree by using fuzzy comprehensive evaluation methods. The hydrochemical type in surface water was of HCO3--Mg2+-Ca2+ type. The cations and anions in surface water were mainly from weathering and dissolution of carbonate rock. Results showed that the water quality in all 69 sampling sites was all of class Ⅰ. The integrated health degree reached more than 0.85 and the health rate were 100%. Although ammonia nitrogen was regarded as the main contamination factor, but it had a little effect on the entire body of water. Overall, the surface water qualities of most samples in Xiahe County was good condition.

Sustainable urban drainage systems (SuDS) such as swales are designed to collect, store and infiltrate a large amount of surface runoff water during heavy rainfall. Stormwater is known to transport pollutants, such as particle-bound heavy metals, which are known to often accumulate in the topsoil. In this study, a portable XRF instrument is used to provide in situ spatial characterization of soil pollutants. The method uses portable XRF measurements of heavy metals along profiles with set intervals (1 meter) to cover the swale with cross-sections, across the inlet, the deepest point and the outlet. Soil samples are collected, and the In-Situ measurements are verified by the results from laboratory analyses. Stormwater is here shown to be the transporting media for the pollutants, so it is of importance to investigate areas most prone to flooding and infiltration. This quick scan method is time and cost-efficient, easy to execute and the results are comparable to any known (inter)national threshold criteria for polluted soils. The results are of great importance for all stakeholders in cities that are involved in climate adaptation and implementing green infrastructure in urban areas. However, too little is still known about the long-term functioning of the soil-based SuDS facilities.

Wastewater surveillance for SARS-CoV-2 has garnered extensive public attention during the COVID-19 pandemic as a proposed complement to existing disease surveillance systems. Over the past year, methods for detection and quantification of SARS-CoV-2 viral RNA in untreated sewage have advanced, and concentrations in wastewater have been shown to correlate with trends in reported cases. Despite the promise of wastewater surveillance, for these measurements to translate into useful public health tools, it is necessary to bridge the communication and knowledge gaps between researchers and public health responders. Here we describe the key uses, barriers, and applicability of SARS-CoV-2 wastewater surveillance for supporting public health decisions and actions, including establishing ethical consideration for monitoring. Overall, while wastewater surveillance to assess community infections is not a new idea, by addressing these barriers, the COVID-19 pandemic may be the initiating event that turns this emerging public health tool into a sustainable nationwide surveillance system.

The coronavirus disease 2019 (COVID-19) pandemic has led to wastewater surveillance becoming an important tool for monitoring the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) within communities. As a result, molecular methods, in particular reverse transcription-quantitative PCR (RT-qPCR), have been employed to generate large data sets aimed at the detection and quantification of SARS-CoV-2 in wastewater. Although RT-qPCR is rapid and sensitive, there is no standard method that fits all use cases, there are no certified quantification standards and experiments are carried out using numerous different assays, reagents, instruments, and data analysis protocols. These variations can lead to the reporting of erroneous quantitative data resulting in potentially misleading interpretations and conclusions. We have reviewed the SARS-CoV-2 wastewater surveillance literature focusing on the variability of RT-qPCR data as revealed by inconsistent standard curves and associated parameters. We find that variation in these parameters and deviations from best practices as described in The Minimum Information for Publication of Quantitative Real-Time PCR Experiments (MIQE) guidelines suggest a lack of reproducibility and reliability in quantitative measurements of SARS-CoV-2 RNA in wastewater.

Community-level wastewater monitoring for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA has demonstrated useful correlation with both coronavirus disease 2019 (COVID-19) case numbers and clinical testing positivity. Wastewater monitoring on college campuses has demonstrated promising predictive capacity for the presence and absence of COVID-19 cases. However, to date, such monitoring has largely relied upon composite or grab samples and reverse transcription quantitative PCR (RT-qPCR) techniques, which limits the accessibility and scalability of wastewater monitoring. In this study, we piloted a workflow that uses tampons as passive swabs for collection and reverse transcription loop-mediated isothermal amplification (RT-LAMP) to detect SARS-CoV-2 RNA in wastewater. Results for the developed workflow were available same day, with a time to result following tampon swab collection of approximately three hours. The RT-LAMP 95% limit of detection (76 gene copies reaction-1) was greater than RT-droplet digital PCR (ddPCR; 3.3 gene copies reaction-1). Nonetheless, during a building-level wastewater monitoring campaign conducted in the midst of weekly clinical testing of all students, the workflow demonstrated a same-day positive predictive value (PPV) of 33% and negative predictive value (NPV) of 80% for incident COVID-19 cases. The NPV is comparable to that reported by wastewater monitoring using RT-qPCR. These observations suggest that even with lower analytical sensitivity the tampon swab and RT-LAMP workflow offers a cost-effective and rapid approach that could be leveraged for scalable same-day building-level wastewater monitoring for COVID-19.

This study used double-bounded dichotomous-choice to estimate and analyze the factors affecting households’ willingness to pay (WTP) for water quality improvement. This study notes that households with higher income, living near polluted water source, using tap water instead of natural water, who are handicraft producers, and who have more members are willing to pay more. However, households who rarely hear about environmental pollution issues and who are offered a higher bid are more likely to refuse to pay. Solutions to improve water quality are suggested such as to raise people's awareness through communication channels and social organizations; to increase income associated with environmental protection policies; to construct wastewater treatment plants; to encourage the relocation of production establishments to industrial parks and industrial complexes; to put regulations on collection, payment and sanctions in case of not declaring and paying fees into village conventions; to promulgate circulars, and bylaws to concretize and simplify regulations and policies of the Government, Ministry of Natural Resources and Environment.

Lack of water resources in Iran, especially in recent years, has faced the agricultural sector as the most important consumer of water resources, with serious challenges. In Iran, the agricultural sector accounted for more than 90% of water consumption. However, the focus on domestic production and self-sufficiency policy in staples (wheat, barley, maize and rice) has been emphasized in general agriculture's policy. This study was conducted to estimate the imported virtual water from the imports of basic products in Iran using defined indicators during 1961-2013. Also this study investigated the possibility of achieving self-sufficiency due to the limited water resources in Iran. The results of this study showed with the increase in cereal imports, virtual water imports from 0.28 billion cubic meters in 1961 increased to 17.6 billion cubic meters in 2013 and on average about 60% of virtual water imports in strategic products is related to wheat imports during the past 53 years. Other products in cereal (barley, maize and rice) are also indicative of the general trend of increasing imports of virtual water in development plans. The estimated long-run elasticity of virtual water imports in the cereal group compared with the country's water resources also showed that with a one percent reduction in renewable water resources of the country, the virtual water import in the main cereal group will increase equivalent to 2.89 percent and the determination coefficient more than 90 percent also confirms this negative relationship. According to this result and the emphasis on the fact that renewable water resources per capita in the country is falling increasingly, it cannot be expected that domestic production could compensate for the imports of the cereal group and virtual water imports with current technology, without increasing the water productivity and without additional harm to water resources.

The novel coronavirus SARS-CoV-2, the causative agent of COVID-19, emerged in the human population in December 2019 and spread worldwide within a few short months. Much of the public health focus for preventing and mitigating the spread of COVID-19 has been on individual and collective behaviors, such as social distancing, mask-wearing, and hygiene. Yet it is equally important to recognize that these behaviors and health outcomes occur within broader social and environmental contexts. Factors within local communities, regional policy, race, history, personal beliefs, and natural- and built environmental characteristics affect underlying population health and the spread of disease. For example, COVID-19 has renewed attention to secure water and sanitation services and their importance in protecting human health. Many remote Alaskan communities are particularly vulnerable because of inadequate water and sanitation systems. In this paper, we describe how inadequate water and sewer services may place the inhabitants of remote Alaskan communities at higher risk of COVID spread. We argue that insufficient water security and inadequate sewer systems, along with household overcrowding, multigenerational residences, limited transportation options, limited medical facilities, and higher prevalence of chronic diseases could lead to a greater potential of COVID-19 transmission and to more severe disease outcomes in these communities.

Groundwater is an important role of the environment in natural resources. The major sources of groundwater contamination in this study were open discharges of domestic sewage, inadequate sewerage system, open defecation, septic tanks, soak pits, contaminated water pools, unorganized solid waste dumping and use of fertilizers, pesticides for agriculture deteriorated the condition. In this present study revealed that the physical and chemical characteristics of ground water in different areas of Kannur district in Kerala have been determined different seasons with respect to its suitability for drinking and agricultural purposes. For this study the groundwater samples were collected during pre-monsoon and post-monsoon seasons from 70 wells representing the entire the study area. The groundwater samples were analyzed for Physico-chemical characteristics using standard techniques in laboratory and compared with standards. The samples were analyzed with reference to the WHO and BIS standards. The groundwater quality information of the entire study area have been prepared using statistical and GIS technique for all the parameters. This paper proved in GIS will be helpful for measuring, monitoring and managing the groundwater pollution in the study area and suggested to protect groundwater resources in the environment.

Integrated Water Resources Management (IWRM) is one of the system thinking approaches emerged in the 1990s. Since then it has been applied in various countries and contexts. However, the implementation of the IWRM is contested. There are paucity of literature and guidelines as to how the concept can be operationalized. In Ethiopia, there is no evidence that IWRM is successfully instituted. Particularly, IWRM has never been implemented in the Awash River Basin. The study generated data from household and institutional surveys, in-depth interviews, focused group discussions, workshops, and secondary sources. Multiple sources of data were triangulated and thematically summarized. We found that pragmatic water resources management through system approach helps to recognize river basin as a bigger system in which the natural and human systems function. This resolves the problem of fragmentations among among various actors, sectors, interest and priorities. That it facilitates the coordination of various subsystems. The operationalization of IWRM as a system to secure water resources require the establishment and/or strengthening of the interactions of various systems, subsystems, and the elements within the entire basin system. Finally, enabling institutional environments should be considered as a medium of realizing IWRM.

The objective of the research was to evaluate the concentration of organochlorine pesticides in sediment of the Alvarado Veracruz lagoon system, Mexico. To define the risk that causes to the public health the consumption of organisms that inhabit in sediments of this ecosystem. In 20 out of 41 stations analyzed, 11 prohibited organochlorine pesticides were identified, such as hexachlorocyclohexane, lindane, aldrin, dieldrin, endrin, among others. The highest concentrations were: aldrin 46.05; β-HCH 42.11; α-HCH 38.44; γ-HCH (lindane) 34.20; δ-HCH 31.61; methoxychlor 29.40; heptachlor epoxide 25.70; heptachlor 24.11; dieldrin 22.13; endrin 21.23; and endrin aldehyde 12.40 ng g-1. Concentrations reported are prohibited in international standards. In Mexico it is necessary to establish permissible limits in the environmental legislation for this matrix. There is a strong need to demonstrate, with scientific studies, the level of concentration reported by impact of compounds widely used in agricultural-livestock activities.

A complete halt on all anthropogenic activities and human movement due to COVID-19 lockdown has provided a great opportunity to assess the impact of human activities on coastal marine ecosystems. The current study assessed the concentration of the metals in water samples of the largest brackish water lagoon of Asia; the Chilika lagoon in the state of Odisha, India between pre-COVID-19 and post-COVID-19 lockdown scenarios. Monthly water samples (n=30 stations) from 0.3 m depth were collected from three sectors of the lagoon seasonally; pre-monsoon, monsoon, and post-monsoon. In addition to various physical parameters [pH, salinity, alkalinity, (DO) dissolved oxygen, (TDS) total dissolved solids, and (EC) electrical conductivity] the collected water samples were analysed for 18 trace metals (Al, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sr, Th, Tl, U, V). Most of the physical parameters showed a significant variation between pre-and post-COVID-19 scenarios, except for pH and DO. The concentration of five metals (Be, Cd, Co, Ni, and Pb) remained below detection limits in all water samples. The impact of COVID-19 lockdown on the concentration of the metal in the water samples was noticed along with the three sectors of the lagoon. However, eight metals (Al, As, Cr, Fe, Mn, Th, U, and V) were significantly different between the COVID-19 scenarios and the remaining five metals were not statistically significant. The mean concentration of Al, As, Fe, Th, and V were higher in the pre-COVID-19 scenarios, whereas only Cr and Mn were higher in the post-COVID-19 scenarios. The mean concentration of U was similar among both COVID-19 scenarios, even though there were seasonal and sectoral differences. The seasonal influence of riverine influx was more evident on metal concentration during the monsoon season, whereas the difference between sectors was more prominent during the post-monsoon season. An increased number of correlations between physical parameters and metal concentration were observed in the post-monsoon season and post-COVID-19 scenario. This study provides evidence that the imposition of COVID-19 lockdown reduced metal influx in the water column and improved the water quality of the Chilika lagoon. Our results can be used as baseline for metal concentration in surface waters of the lagoon.

(1) Background: Water resources at Chia lagoon experience possible threat to its sustainability. Communities are seeking alternatives to improve water quality at the lagoon. The study evaluated the extent at which local communities are WTP to improve water quality at Chia lagoon and the influencing factors. (2) Methods: A study was conducted at Chia lagoon, Western Part of Lake Malawi from November, 2015 to March, 2016. Wide range of data collection approaches such as household surveys, exploratory surveys, focus group discussions, key informant interviews and field observation were employed. A sample of 240 households were selected randomly. Qualitative data was analysed using content analysis. Multivariate logistic regression analysis was used to determine factors influence WTP. (3) Results: Out of 240 respondents, 57.4% expressed WTP. Multivariate logistic regression analysis demonstrated significant (P<0.01 or P<0.05) relationship between demographic (Gender, age, literacy level), social-economic (Land ownership, main agriculture water source and income) and institution (civic education and social network, extension, water user rights) factors and WTP. (4) Conclusion: The findings from this study provide significant clues for further research and baseline information for local government and local communities in development of more effective and holistic approaches to improve water quality.

The parts obtained by FFF technology are anisotropic in any direction; while the whole part constitutes out of layers, each of the layers include one or more perimeters of shell and the infill with density from 0 to 100%. Mechanical performance of FFF parts depends on its shape, orientation, constitution and 3D printing parameters. A classification for shapes of parts obtained by FFF and stressed during its operation is provided. For the most questionable class (parts with interrupted shell critically stressed on interlayer boundaries) a representative sample and testing apparatus is developed. Different approaches to the sample shape modification were applied and tested. The part shape optimization resulted in increment of the force, required to fracture the part from 483 to 1096 N.

The Umbulan Water Supply Project is categorized by the Shipping Infrastructure Acceleration Committee in the list of Accelerated National Strategic Projects through Presidential Regulation Number 3 of 2016 concerning the Acceleration of the Implementation of National Strategic Projects, targeted to operate in mid-2019. This is what will be the focus of the stakeholders of the Umbulan Water Supply Project. This study was to identifying and analyzing networks among stakeholders. Method: This study used a qualitative approach with exploratory methods combined with meta-analysis identification design Identification of stakeholder mapping in the context of early detection of stakeholder involvement in the implementation of the Umbulan Water Supply Project at various levels starting from the National, Provincial (East Java), District/City (Pasuruan, Sidoarjo, Surabaya, to Gresik), Sub-District (Winongan, Gondang Wetan, and Pohtjentrek). The conclusion of this study was based on in-depth interviews and focus group discussions in describing the determination of stakeholders which were divided into two, namely primary stakeholder and secondary stakeholder, and outline the result of the indicators analysis on the stakeholder network of Umbulan Water Supply Project.

In this work a modified version of the well-known Simple Water Balance (SWB) model, comprising here three parameters instead of one, was used. Although simple, the model was tested in large-scale river basins in east-central Greece, upstream two hydrometric stations. The available historic runoff records comprised 19 hydrologic years each, on a monthly basis. Thirteen among them were used for calibrating the model, whereas the six subsequent, for validating it. Two different efficiency criteria were used as a measure of performance of the modified model. Their values, calculated for both calibration and validation stages, were close and relatively high. Thus, keeping in mind both the size and complexity of the river basins studied, one can conclude that the modified model, despite its simplistic concept and lumped form, fits satisfactorily the historic runoff series.

The Surface Water and Ocean Topography (SWOT) mission, to be launched in 2021, will provide water surface elevations, slopes, and river width measurements for rivers wider than 100 m. In this study, synthetic SWOT data are assimilated in a regional hydrometeorological model in order to improve the dynamics of continental waters over the Garonne catchment, one of the major French catchments. The aim of this paper is to demonstrate that the sequential assimilation of SWOT-like river depths allows the correction of river bed roughness coefficients and thus simulated river depths. An extended Kalman Filter is implemented and the data assimilation strategy was applied to four experiments of gradually increasing complexity regarding observation and model error over the 1995-2000 period. With respect to a “true” river state, assimilating river depths allows the proper retrieval of constant and spatially distributed roughness coefficients with a root mean square error of 1 m1/3 s-1, and the estimation of associated river depths. It was also shown that river depth differences can be assimilated, resulting in a higher root mean square error for roughness coefficients with respect to the true river state. The last study shows how one can take into account more realistic sources of SWOT error measurements, in particular the importance of the estimation of the tropospheric water content in the process.

Hotel water systems colonized with Legionella spp. have been the source of travel-associated Legionnaires’ disease and cases, clusters or outbreaks continue to be reported worldwide each year. A total of 132 hotels linked with travel-associated Legionnaires’ disease, as reported through the European Legionnaires’ Disease Surveillance Network, were inspected and tested for Legionella spp. during 2000–2019 by the public health authorities of the island of Crete (Greece). A total of 3,311 samples were collected: 1,885 (56.93%) from cold water supply systems, 1,387 (41.89%) from hot water supply systems, 37 (1.12%) were swab samples and two (0.06%) were soil. Of those, 685 (20.69%), were collected from 83 (62.89%) hotels, testing positive (≥ 50CFU/L) for Legionella pneumophila) serogroups 1-10, 12-14 and non-pneumophila species (L. anisa, L. erythra, L. tusconensis, L. taurinensis, L. birminghamensis, L. rubrilucens, L. londiniesis, L. oakridgensis, L. santicrusis, L. brunensis, L. maceacherii). The most frequently isolated L. pneumophila serogroups were 1 (27.92%) and 3 (17.08%). Significantly higher isolation rates were obtained from hot water supply systems (25.96%) versus cold water systems (16.98%) and swab samples (13.51%). A Relative Risk (R.R.) > 1 (p < 0.0001) was calculated for hot water temperature <55 °C (R.R.: 4.43), chlorine concentrations <0.2 mg/L (R.R.: 2.69), star rating <4 (R.R.: 1.73) and absence of Water Safety Plan implementation (R.R.: 1.57).

The challenges to sustainability governance across multiple geographical/cultural contexts lead us to the “piecemeal engineering” idea advocated by the philosopher Karl Popper, which explicitly considers context. We argue for adopting the piecemeal engineering approach, augmented by adaptive policies and modern (online) collaboration platforms to maximize the prospects of sustainable practices worldwide. This recommended course is not intended to be a theory in itself. Rather, it is a well-grounded, practical and practicable stop-gap measure in times when complexity and change outpace theories and strategies. We present a philosophical foundation for this “Augmented Popperian Experimentation.” Focusing on The Water Network (the largest collaborative platform for water researchers and professionals), we show that sustainability-oriented organizations in the water realm and others are inching toward the practice we advocate. We discuss implications.

Rainwater harvesting could be an optional water source to fulfil the emergency water demand in different setups. The aim was to assess if the rainwater harvesting potential for households and selected institutions were sufficient to satisfy the emergency water demand for the prevention of COVID-19 in Dilla town, Southern, Ethiopia. Rain water harvesting potential for households and selected institutions were quantified using 17 years’ worth of rainfall data from Ethiopian Metrology Agency. With an average annual rainfall of 1464 mm, households with 40 and 100 m2 roof sizes have a potential to harvest between 15.71-31.15 m3 and 41.73-82.73 m3 of water using Maximum Error Estimate. Meanwhile 7.2-39.7 m3 and 19.11-105.35 m3 of water can be harvested from the same roof sizes using Coefficient of Variation for calculation. Considering mean monthly rainfall, the health centres and Dilla University can attain 45.7% and 77% of their emergency water demand, while the rest of the selected institutions in Dilla Town can attain more than 100 % of their demand using only rainwater. Rain water can be an alternative water source for the town in the fight against COVID-19.

Emerging organic contaminants (EOCs) of anthropogenic origins are ubiquitous in environmental compartments, including aquatic systems. Thus, EOCs have attracted considerable research and public attention due to their potential human and ecological health risks. However, compared to other aquatic environments such as wastewater systems, comprehensive reviews focussing on the occurrence and human health risks of EOCs in drinking water systems are still lacking. Therefore, to address this knowledge gap, the current review posits that drinking water systems harbour a cocktail of toxic EOCs, which pose public health risks via multiple exposure routes. In the present review, global evidence is examined to track EOCs along the source-pathway-receptor-impact-mitigation (SPRIM) continuum. Evidence shows that, various groups of EOCs, including pharmaceuticals and personal care products, solvents, plasticizers, endocrine disrupting compounds, gasoline additives, per- and polyfluoroalkyl substances (PFAS), food colourants, artificial sweeteners, and musks and fragrances, have been detected in drinking water systems. The anthropogenic sources of EOCs detected in drinking water systems, including wastewater systems and industrial emissions, are summarized. Further, the behaviour and fate of EOCs in the drinking water systems, including removal processes are discussed. Once in drinking water systems, human exposure to EOCs may occur via ingestion of contaminated drinking water and cooked foods, and possibly dermal contact and inhalation. The high-risk environments, and risk factors and behaviours predisposing humans to EOC exposure are discussed. Evidence on the human health risks of the various EOCs and a critique of the data are presented. Notably, besides inferential data, quantitative epidemiological evidence directly relating the occurrence of EOCs in drinking water systems to specific adverse human health outcomes is still scarce. Lastly, future research directions, including the need for quantitative public health risk assessment, and the application of emerging detection tools are discussed.

Dams have made great contributions to human society, facilitating flood control, power generation, shipping, agriculture and industry. However, the construction of dams greatly impacts downstream ecological environments and nearby marine areas. To summarize these impacts, this review used recent research to comprehensively analyze how dam construction has affected river hydrology, geomorphology, and ecosystem of downstream reaches globally. Effects of dams on ecosystems occur through reduced river flow, reduced sediment flux, altered water temperature, changed estuary delta, altered composition and distribution of nutrients, altered structure and distribution of phytoplankton populations, caused habitat fragmentation, and blocked migration routes in river sections and adjacent seas. Besides, exploring new reservoir management strategies (including targeted control of dam storage and flushing sediment operations), banning fishing activities, and removing unnecessary dams (obsolete or small dams) are becoming crucial tools for ecosystem restoration.

The water quality of the river is becoming deteriorated due to human interference. It is essential to understand the relationship between human activities and land-use types to assess the water quality of a region. GIS has the latest tool for analyzing the spatial correlation. Land use land cover and change detection is the best illustration to show the human interactions on land features. The study assessed water quality index of upper Ganga River near Haridwar, Uttarakhand and spatially correlated them with changing land use to reach a logical conclusion. At the upper course of Ganga along 78 Km long from Kaudiyala to Bhogpur, water samples were collected from five stations. For water quality index the physicochemical parameters like pH, EC, DO, TDS, CaCO3-, CaCO3, Cl¯, Ca++, Mg++, Na+, K+, F-, Fe2+ were considered. The result of the spatial analysis was evaluated through error estimation and spatial correlation. The root mean square error between spatial land use and water quality index of selected sampling sites was estimated as 0.1443. The spatial correlation between land-use change and site-wise differences in water quality index has also shown a high positive correlation with R² = 0.8455. The degree of positive correlation and root mean square error has strongly indicated that the water quality of the river at the upper course of Ganga is highly impacted through human activities.

In response to droughts, various media campaigns and water saving instructions are released, often however, with only temporary water conservation effects. A promising development is this regard are Digital Water Meters (DWM) that provide near real-time water-use feedback. Despite extensive DWM experience in some water-stressed regions, a profound understanding of the initial attitude towards DWM and message tailoring opportunities are rarely empirically explored. Therefore, we aim to obtain insights into the attitude towards the introduction of DWM and explore opportunities for message tailoring, a topic of extra relevance as we may be on the threshold of a large-scale implementation in many world regions. Messages tailored to (i) normative beliefs and attitudes on drinking water, (ii) water-use activity and (iii) phase of decision-making, seem particularly compatible with DWM. Through a survey (n=1037) in the Netherlands, we observe that 93% of respondents have no objections utility investments in DWM and that 78% would accept a free DWM because of improved leakage detection, lower costs and environmental considerations. Finally, instead of sociodemographic factors, we observed that an attitude-based customer segmentation approach proved an especially useful predictor of respondent’s motivation to endorse DWM and forms a promising basis for water conservation message-tailoring strategies.

Both academic literature and global organizations have emphasized the need for responsible water consumption, as stated in the Sustainable Development Goal 12. However, individuals’ water-saving behaviors in their current state are not enough. This situation entails a resistance to change (RC) in consumer habits and a lack of perceived risk of scarcity. The novelty of this study lies in examining the influence of RC (through its emotional, cognitive, and confidence components) and perceived risk on water-saving intention. Interviews (n = 384) were conducted in the southeast Mediterranean area of Spain by interviewers using a paper-and-pencil questionnaire. The results of the structural equation modeling show that the perceived risk and the components of cognitive rigidity and negative emotions exert a direct influence on water-saving habits and an indirect influence on water-saving intention. None of the components of RC directly influence intention, and a lack of confidence in the outcomes of water saving does not influence water-saving habits or water-saving intention. In addition to the results obtained, the novelty of the work lies in the idea that in order to influence the perception of the risk of water scarcity through awareness campaigns, it is better to use an emotional message rather than showing facts or information, because this does not drive water saving behavior.

Rainfall runoff modeling has been a subject of interest for decades due to a need to understand a catchment system for management, for example regarding extreme event occurrences such as flooding. Tropical catchments are particularly prone to the hazards of extreme precipitation and the internal drivers of change in the system, such as deforestation and land use change. A model framework of dynamic TOPMODEL, DECIPHeR v1 - considering the flexibility, modularity and portability - and Generalized Likelihood Uncertainty Estimation (GLUE) method are both used in this study. They reveal model performance for the streamflow simulation in a tropical catchment, i.e. the Kelantan River in Malaysia, that is prone to flooding and experiences high rates of land use change. 32 years' continuous simulation at a daily time scale simulation along with uncertainty analysis resulted in a Nash Sutcliffe Efficiency (NSE) score of 0.42 from the highest ranked parameter set, while 25.35% of the measurement falls within the uncertainty boundary based on a behavioral threshold NSE 0.3. The performance and behavior of the model in the continuous simulation suggests a limited ability of the model to represent the system, particularly along the low flow regime. In contrast, the simulation of eight peak flow events achieves moderate to good fit, with the four peak flow events simulation returning an NSE > 0.5. Nonetheless, the parameter scatterplot from both the continuous simulation and analyses of peak flow events indicate unidentifiability of all model parameters. This may be attributable to the catchment modelling scale. The results demand further investigation regarding the heterogeneity of parameters and calibration at multiple scales.

This article presents a field-performance investigation on an Integrated Solar Water Supply System (SWSS) at two isolated agricultural areas in Thailand. The two case-study villages (Pongluek and Bangkloy ) have experienced severe draughts in the last decades, and therefore water supply has become a major issue. A stand-alone 15.36 kW solar power and a 15 kW solar submersible pump were installed along with the input power generated by solar panels supported by four solar trackers. The aim is to lift water at the static head of 64 and 48 m via piping length of 400 metres for each village to be stored in 1,000 m3 and 1,800 m3 reservoirs at an average of 300 m3 and 400 m3 per day, respectively for Pongluek and Bangkloy villages. The case study results have shown that the real costs of electricity generated by SWSS using solar PV systems intergraded with the solar tracking system yield better performance and are more advantageous compared with the non-tracking system. This study illustrates how system integration has been employed. System design and commercially available simulation predictions are elaborated. Construction, installation, and field tests for SWSS are discussed and highlighted. Performances of the SWSS in different weather conditions such as sunny, cloudy, and rainy days were analysed to make valuable suggestions for higher efficiency of the integrated solar water supply systems.

Soil water loss by evaporation influences the sodium adsorption ratio (SAR) of irrigation drainage water. Evaporation concentrates sodium and magnesium but calcite precipitation has a more complicated effect on soluble calcium and alkalinity. Here we propose a revised sodicity hazard assessment that quantifies the impact of evaporative water loss and calcite precipitation on drainage water SAR. This paper shows sodicity hazard is determined by the initial composition of irrigation water as originally suggested by previous researchers, and provide a simple, accurate way to identify the potential sodicity hazard of any irrigation water. In particular, the initial equivalent concentration of alkalinity and calcium determine the salinization pathway followed during evaporation. If the irrigation water alkalinity exceeds soluble calcium expressed as equivalent concentrations, drainage water SAR approaches an upper limit determined by the initial relative concentration of sodium and magnesium. If irrigation water alkalinity is less than soluble calcium, drainage water SAR approaches a lower limit determined by the initial calcium, magnesium and sodium. In both cases the SAR is scaled by the square root of the concentration factor √Fc quantifying soil water loss. To assess the impact of evaporation and calcite precipitation on the SAR and test the accuracy of the new sodicity hazard assessment, we evaluated data from previously published lysimeter studies. We plotted water composition boundaries for each source water, comparing these boundaries to the drainage water composition recorded in the lysimeter studies. As salinity increased by evaporation, each drainage water followed a distinct salinization path.

Per- and polyfluoroalkyl substances (PFAS), a large group of developing contaminants, have recently become the subject of increased concern due to their potentially hazardous effects. They are classified as poisonous substances that can be found in a variety of aquatic situations. The widespread usage of PFAS across numerous industries has resulted in a high environmental and biological accumulation of the substance. Identification and elimination of PFAS from the environment is crucial since they are tenacious and have the potential to cause cancer. Traditional methods of PFAS content assessment, while useful in some cases, are often inadequate for continuing environmental control and monitoring. Within academia, there is a noticeable desire for rapid, cost-effective, durable, and readily transportable techniques targeted at detecting PFAS compounds in field settings. As a result, environmental labs and other governmental and non-governmental bodies may start testing more often as mandated by legislation. PFAS-detecting sensors, which offer an innovative solution that can be applied in situ and is affordable and simple to use, have emerged as a promising method for assessment based on the existing research. In addition, it may give administrators and users of water worldwide useful information they can use. This article provides a thorough summary of recent developments, limitations, and performance considerations in PFAS detection sensors. The Surface-enhanced Raman scattering (SERS) method has also been covered because of its excellent sensitivity and specificity for detecting pollutants, making it a potential solution for sensing PFAS. Intelligent sensing systems for PFAS detection should benefit from this research.

A framework for the review of existing water management systems and their transformation into robust water sharing systems is offered. The framework focuses on the need to develop efficient and equitable ways to manage water scarcity and plan to deal with the tensions scarcity imposes on any community. The framework identifies a way to bring together traditional community-managed systems with those typically used to allocate water to large water users and more commonly found in developed countries. So that use can be kept within sustainable limits while optimizing use, the framework includes mechanisms that enable the reallocation of water as demand and supply conditions change. Non-consumptive uses are recognized and environmental objectives can be delivered efficiently. Compliance with well-established accounting and hydro-logical concepts. Ways to increase the value of existing entitlements, encourage innovation and protect investments are included as options. It is recognized that the governance and legal arrangements necessary to underpin successful implantation are context specific.

There are abundant coal, oil and natural gas resources in "Golden Triangle" energy region. Energy resources development, coal chemical industry, coal power and other industries play an important role in promoting regional economic growth, but facing the insufficient water supply. Under the condition of marginal equilibrium of water resources, the paper firstly analyzes the water utilization, and calculates the potential water-saving amount. Then, the paper constructs a cooperative game model and allocates the newly increased GDP by using the weight distribution method. Finally, the paper puts forward some policy suggestions to reduce the efficiency gap of water utilization among regions.

Water pollution in Iraq has been extended disaster edge; this pollution is caused by wastes and sewages into soil and rivers, pollutant water sources influence the outbreak and serious epidemic status among the population.. The aim of this study is to determine the bacteriological quality of drinking water sources and characteristics of water-borne diseases especially diarrheal cases in Darbandikhan city. 166 water samples, collected from the different sources and areas, were tested for the presences of coliform bacteria as an indicator for pathogen contamination. Most probable number index was used for coliform enumeration. 161 diarrheal cases were taken as a sample from the patients were admitted to the general hospital in Darbandikhan district.. The questionnaire form was planned to view characteristics of diarrheal cases and patients were interviewed directly, the data was analyzed by STATA software application. 46% of the diarrheal cases used tap water for drinking. On the other hand, the reminder (54%) used other sources for the same purpose. All the risk factor such as type of water source, sufficiency of the water, duration of water storage and chlorination were associated with diarrhea. Almost half of the cases were children and three quarters were single. The data was analyzed by STATA version 13.1.This study indicated that the majority of drinking water sources in Darbandikhan city are not suitable for drinking, although net pipe system supplied chlorine significantly it has been proven that the tap water from the homes is not suitable for consumption.

Water resource is considered as a significant factor in development of regional environment and society. Water consumption prediction can provide important decision basis for the regional water supply scheduling optimisations. According to the periodicity and randomness nature of the daily water consumption data, a Markov modified autoregressive moving average (ARIMA) model is proposed in this study. The proposed model, combined with the Markov chain, can correct the prediction error, reduce the continuous superposition of prediction error, and improve the prediction accuracy of future daily water consumption data. The daily water consumption data of different monitoring points are used to verify the effectiveness of the model, and the future water consumption is predicted, in the study area. The results show that the proposed algorithm can effectively reduce the prediction error compared to the ARIMA.

The aim were to determine the drinking water preferences of people applied to a family health center. This cross-sectional study was carried out from April 01st to May 31st, 2022. The data were evaluated using the chi-square test and percent ratios with a significant of P < 0.05. The mean age of all 432 respondents was 48.03±15.86. It was determined that those aged 31-45 had drunk more bottled water (p<0.01) and more spring water (p<0.001), that those aged 65 and over more purified water (p<0.001), that women more tap water (p<0.001), that married people had drunk more demijohn and tap water (p<0.001, each one), that divorced/widows had drunk more packaged and purified water (p<0.001, each one), that the illiterate/literate bottled water (p<0.001, per one), that those who had no income/people who lived on the state or municipal assistance only carboy water (p<0.001). This study suggests that the biggest factor that positively affected the drinking water preference was the packaging of the water. However, the drinking rates of mains water and spring water were quite low. Convincing the authorities to make the mains water drinkable is of great importance in terms of overcoming the public's distrust of mains water.

Multisource meteorological re-analyses are the most reliable forcing data for driving hydrological models to simulate streamflow. We aimed to assess the different hydrological responses through hydrological modeling in the upper Lancang-Mekong River Basin (LMRB) using the two gridded meteorological datasets, climate forecast system reanalysis (CFSR) and the China Meteorological Assimilation Driving Datasets for the SWAT model (CMADS). We selected the Pearson’s correlation coefficient (R), percent bias (PBIAS), and root mean square error (RMSE) indices to compare the six meteorological variables of the two datasets. The spatial distributions of the statistical indicators in the CFSR and CMADS, namely, the R, PBIAS, and RMSE values, were different. Furthermore, the soil and water assessment tool plus (SWAT+) model was used to do hydrological modeling based on CFSR and CMADS meteorological re-analyses in the upper LMRB. Different meteorological datasets resulted in significant differences of hydrological responses, which reflected by different sensitive parameters and their optimal value. These different calibrated optimal values of sensitive parameters further lead to the different simulated water balance components between CFSR- and CMADS-based SWAT+ model. These findings can help in a better understanding of the strengths and weaknesses of different meteorological re-analysis datasets and the roles on the hydrological modeling.

River monitoring has the potential to grow substantially with present-day available affordable and locally sourced hardware. Yet river monitoring networks are still under pressure due to lack of resources, difficulties with maintenance, and rapidly changing conditions which in part may be due to climate change. We advocate that to turn around this trend, monitoring stations must rely on local people, work with locally available devices, work without contact with water and operate through openly available knowledge. River observations with camera videos have this potential. IP cameras, drones or smartphones are widely available as observation platforms. The scientific methods are well established in literature. Yet current attempts to establish scalable open-source software solutions that can be operated anywhere are lacking. In fact, currently available software is either research-oriented, more aimed at incidental observations, is restricted to single-use licenses, entirely proprietary, or restricted to operations through a third-party Software as a Service. To overcome this obstacle, we present OpenRiverCam, a free and open-source software ecosystem for river observations that can fulfill a wide variety of use cases and business cases through a well-documented and simple to use Application Programming Interface, service workflows, cloud scalability and interoperability, and options to extend to several applications within the hydrological, hydrodynamic, environmental and geospatial domains. We demonstrate its current technical abilities through three different case studies that all originate from a user perspective. We discuss the future developments to meet further requirements, which include documentation, widely available training materials and embedding in curricula, and further hardware and software developments.

Circular Economy (CE) is noted as an emerging tool or framework to support sustainable production and consumption agenda. In addition, CE is aiming to be a trigger for redefining economic growth pathways to be sustainable, inclusive, and sensitive to ecological and environmental agendas and to focus its operational standards on co-creating societal benefits. Concerning the guiding principles and the standards of practice applied to implement and scale circular economy, this study will provide an overview of the water sector-specific circularity roadmaps and strategies in the Latin American Region. By using a semi-systematic review, document analysis, and qualitative assessment approach, we highlight framings and operational pathways, gaps, and needs within existing practices of circularity in the water sector. The results provide an overview of CE pathways at the national level of selected countries in LAR iterating those nations reflect various levels of advancement (low to high) with CE-focused innovations and policy support structures specific to the water and wastewater sectors. Towards the closing, the study is pointing to the ‘call for action’ to integrate outstanding advances and innovations in the circular economy within sectoral mandates for water and wastewater management, making an argument that circularity in the water sector could serve as an accelerator toward implementing the agenda outlined in Sustainable Development Goals (SDGs) and in particular for SDG 6 (water security for all).

Recharge is a crucial section of water balance for both surface and subsurface models in water resource assessment. However, quantifying its spatiotemporal distribution at a regional scale poses a significant challenge. Empirical and numerical modeling are the most commonly used methods at the watershed scales. However, integrated model inherently contain a vast number of unknowns and uncertainties, which can limit their accuracy and reliability. In this work, we have proposed integrated SWAT-MODFLOW and Transient Water Table Fluctuation Method (TWTFM) to evaluate the spatiotemporal distribution of groundwater recharge in Anyang wa-tershed, South Korea. Since TWTFM also uses SWAT model percolation output data, calibration was performed for individual models and coupled model. The coupled model was calibrated using daily streamflow and hydraulic head. SWAT-MODFLOW model performed well during the simulation of streamflow compared SWAT model. The study output showed that the study watershed had significant groundwater recharge variations during the simulated period. A sig-nificant amount of recharge happens in the wet season. It contributes about 34% of the average annual precipitation of the region. The direct flow components (surface and lateral) showed sig-nificant contributions when the water balance components were evaluated in the region. TWTFM showed a glimpse to estimate recharge, which requires representative monitoring wells in the study region. Comprehensively, the SWAT-MODFLOW model estimated groundwater recharge with reasonable accuracy in the region.

Sachet water (SW) is a major source of drinking water in most Nigerian homes, thus making it a possible conveyance medium for health risks due to contamination rather than for replenishment of the body. This study collected SW from three busy neighborhoods and investigated for the presence of indicator bacteria – Escherichia coli (E. coli), Total Coliform (TC), Total Heterophilic Bacteria (THB), and Staphylococcus – and some physio-chemical parameters – total dissolved solids (TDS), pH, electrical conductivity (EC), and salinity. Multi-variable and exploratory statistical methods were applied to the results to determine correlations between bacterial contamination levels and perceived brand reputation. Bacteriological test with raw SW samples appeared too numerous to count (TNC) and thus required serial dilutions. After seven dilutions, results obtained revealed that SW brands with good reputation had no TC and E. coli and was statistically significant with groupings of other SW brands (χ2 = 12.28; p < 0.05 and χ2 = 37.96; p < 0.05) respectively. Additionally, SW brands with poor reputation had mean values of TC (19.7X10^8 cfu/ml;14X10^8 cfu/ml1.15X10^8 cfu/ml) and E.coli (18.2X10^8 cfu/ml;38.7X10^8 cfu/ml,32.4X10^8 cfu/ml) exceeding threshold value of zero set by the World Health Organization (WHO). Only one sample from poor reputation brand tested positive for Staphylococcus and was not statistically significant (χ2 =5.2191; p = 0.074). Principal Component Analysis (PCA)/ Factor Analysis (FA) revealed that most of the SW had fecal contamination in an alarming magnitude. Therefore, this study suggests that periodic cleaning of distribution lines, location specific treatment, QC and QA measures should be taken to reduce water security risk for SW consumption in the region.

Water hyacinth (Eichhornia crassipes) is a potential accumulator of water pollutants in aquatic ecosystems, and its presence in water systems can affect water quality. This study used different field measurements and laboratory tests of Lake Water to determine the impact of water hyacinth phytoremediation capacity. A total of eight sampling stations used for the two lakes; Lake Koka and Lake Ziway. Sampling stations were selected from sites infested with water hyacinth (low, medium and high) and non-water hyacinth aquatic plants during wet and dry seasons to compare the effects of plants on water quality in the two lakes. All the sampled stations had various human interventions. The water samples were tested for the selected physico-chemical properties namely phosphate, nitrate, pH, electrical conductivity (EC), Biological oxygen demand (BOD5), temperature, and heavy metals (Chromium (Cr), Lead (Pb), Cadmium (Cd), Zinc (Zn), and Copper (Cu). These water quality variables were compared by means of ANOVA. Despite the COD of Lake Ziway, this study found no significant (p &gt; 0.05) variation in the concentrations of Cu, EC, pH and temperature between wet and dry seasons in either lake. Variations in Zn concentration and other physico-chemical parameters (EC, BOD, COD, nitrate, phosphate) between low, medium and high levels of water hyacinth were significant in both lakes (p&lt;0.05). Water hyacinth has shown significant phytoremediation nature during wet and dry seasons. The lowest average heavy metal, phosphate, and nitrate concentrations; and significant pH and temperature variations were observed in Lakes Koka and Lake Ziway, among water hyacinth and other grass-infested sites.

This study evaluated the potential of ERA5 reanalysis as a reference dataset for snow water equivalent (SWE) modeling in 16 Alpine basins of varying catchment sizes using the semi-distributed snow model (TOPMELT) in the Upper Adige river basin in the Eastern Italian Alps. The study aimed to identify errors in ERA5 meteorological variables and assess their impact on SWE computation from 1992 to 2019. The findings revealed that ERA5 precipitation overestimated low-intensity rainfall (drizzle problem) and underestimated high-intensity rainfall, while ERA5 temperature underestimated observations. The overestimation of low-intensity rainfall created fictitious low-intensity snowfall events, which, when combined with colder ERA5 temperature, resulted in delayed snowmelt and increased fictitious snow cover days over the study area. The Quantile Mapping (QM) technique was used to remove errors in ERA5 variables. For precipitation, a monthly correction factor accounting the calibration period (1992-2005) was considered to correct the entire period. Temperature errors were corrected individually for calibration and validation periods. The corrected ERA5 SWE simulation showed improved performance, with a decrease in fictitious snow cover days. The study also highlighted the importance of temperature correction over precipitation correction in SWE simulation, particularly for smaller basins, while considering the monthly moving mean to remove seasonality.

A Water demand per capita will rise in the Arab world as a result of climate change and population expansion. One of the most important aims in coping with population increase around the world is to conserve water supplies. As a result, the Kingdom of Saudi Arabia constructed Al Wajeed Water Treatment System to meet the demands of the southern population. This research aims to assess the drinking water quality produced from the AlWajeed Water Treatment System. Monthly water samples were collected (January 2018 to January 2021) from the Al Wajeed Water Treatment Framework (4sites), extending to governorates; Bishah`s distribution system (5sites) and Tathleeth`s distribution system (7sites). Water quality criteria, such as physical, chemical, and microbiological parameters, revealed that the majority of water samples collected from the Al Wajeed Water Framework and its environs are of a good quality matched the national and international standards. Few sites showed water quality criteria, such turbidity, fluoride and total coliform did not comply with national and global standards. The obtained results explained the importance of monitoring and follow-up programs for drinking water criteria. In addition, they can help the authorities and stakeholders in the sustainable development.

Urban water management rules have long been oriented towards the rapid disposal of rainwater and wastewater through combined or separate drainage networks. This type of urban water management has shown its limits in both developed and undeveloped countries, notably because of its inexorable degradation over time and the cost of its rehabilitation and adaptation to the increase in demand due to urban growth. Sanitation data from the Office Nationale de l’Assainissement du Sénégal. Rainfall data are processed and analyzed to describe the current situation and how variable and high rainfall affects the neighborhood. Approximately 70-92% of the Dakar region's inhabitants have on-site sanitation facilities and sufficient income makes it difficult to manage their wastewater without exposing the environment or the health of citizens. The volumes of domestic wastewater flowed into the environment, in addition to poorly evacuated rainwater, show that the current sanitation system in the Dakar region is largely outdated, and insufficient for an effective drainage of rainwater and wastewater. Increasingly, frequent flash floods of polluted storm water from large amounts of domestic sewage are occurring, resulting in damage to human health. Exceptionally high rainfall is in correlation with high daily rainfall, therefore in recent years daily rainfall higher than 100 mm have been recorded in connection with above-average annual rainfall. That increase in rainfall disrupts the drainage of wastewater in the region of Dakar. A pragmatic and voluntary policy based on the principles of ecohydrology to recreate natural areas will be the only way for Dakar to efficiently manage storm water and wastewater. It can bring Dakar in 2030 into the international group of sustainable green cities.

Food and nutrition insecurity, affecting 30% of the global population in 2020, poses a significant challenge to achieving Sustainable Development Goal (SDG) 2 - Zero Hunger. Urbanization, particularly in sub-Saharan African cities e.g. Lagos, Nigeria, exacerbates these issues, impacting resources and contributing to informal settlements. There is emphasis on innovative solutions in urban farming, with Recirculating Aquaculture Systems (RAS) emerging as one of the promising approach due to its efficiency in space and capital utilization. However, maintaining optimal conditions in RAS, crucial for SDG 2 and 11, requires robust water quality monitoring. This study explores the availability of digital tools for water quality monitoring in small-scale urban RAS, evaluating handheld devices and IoT sensors' reliability through t-test statistical method. The results aim to guide practitioners in selecting effective monitoring tools, contributing valuable insights for sustainable aquaculture in urban areas, particularly in sub-Saharan Africa, where access to affordable digital solutions is pivotal for success and can attract youth to agri-food technologies.

The watershed hydrologic conditions in the Madre de Dios (MDD) basin in the Peruvian Amazon have been irreversibly impacted by deforestation and changes in land use cover. These changes have also had detrimental effects on the geomorphology, water quality, and aquatic habitat within the basin. However, there is a scarcity of hydrological modeling studies in this area primarily due to the limited availability of hydrometeorological data. The primary objective of this study was to examine how deforestation impacts the hydrological conditions in the MDD basin. By implementing the Soil and Water Assessment Tool (SWAT) model, this study determined that replacing 12% of the evergreen broadleaf forest area with bare land resulted in an significant increase in surface runoff by 38% monthly, a reduction of evapotranspiration by 1% annually, and an average monthly streamflow increase of 12%. Changes in spatial patterns reveal that the primary impacted watershed is the Inambari River subbasin, a significant tributary of the Madre de Dios River. This area experiences an annual average surge of 187% in surface runoff generation while witnessing an annual average reduction of 8% in evapotranspiration.These findings have important implications, as they can contribute to instances of flooding and extreme inundation events, which have already occurred in the MDD region.

Metal-organic framework (MOF) is a porous hybrid material of metal ions connected by organic bridging ligands. The coordination bonds link the metal ions, metal-ion clusters, and organic ligands to create the MOFs, and the materials are a distinctive class of crystalline frameworks. These porous materials possess relatively large surface area, tunable pore sizes, various functionalities, and high thermal stability. Therefore, diverse area of research including electrochemical sensor development utilizes distinctive and engineered MOFs materials. The review critically analyzes the strategy adopted for synthesizing a variety of MOFs materials. The role of these engineered materials in the fabrication of a miniaturized device demonstrates the detection of various emerging water contaminants in an aqueous medium. The studies demonstrated an understanding of the insights of sensor and device development. Moreover, the challenges encountered utilizing the MOFs in the electrochemical sensor development are precisely included, along with future perspectives of these studies.

While considering the sensitivity over the parameter optimization, it is essential to determine which parameters have the most significant implications on model performance. This study focuses on the baseflow recession constant as one of the independent basin parameters to forecast low flows, perform hydrograph analysis, and calibrate rainfall-runoff models for significant improvement. Prior studies examined that the optimization of data adjustment parameters can improve the hydrological model performance and determine the minimum acceptable data length for data scarce regions using the Xinanjaing model. However, it is essential to pay special attention to the sensitivity of the recession constant, which can also impact the model performance during the data scarcity. Therefore, this study extends the research to comprehend the recession constant sensitivity over data adjustment parameters in the shorter datasets leading to more reliable parameter estimation. In terms of that, this study explores how recession constant affects hydrological parameter estimation on annual scale while keeping data adjustment parameters constant in continuous hydrological modeling, employing the Xinanjiang (XAJ) model as a case study. This study considered two approaches of recession constant (cg); (i) assessing the relationship between cg and the data adjustment parameter (Cep), for the 28-year datasets, (ii) investigating the significant impacts of the sensitivity of cg over Cep in shorter datasets which can affect the estimation of the acceptable minimum data length in the data scarce basins. The study underscores the importance of the recession constant sensitivity for reliable continuous hydrological model predictions, especially in data-scared areas. The study’s outcomes enhance the understanding of the importance of parameter sensitivity and its relationship in conceptual hydrological modeling during the data limitations.

Environmental legislation on waste management coupled with the potential for nutrients recovery are key factors encouraging the use of advanced treatment technologies to manage biosolids waste. In this context, phosphorus recovery from a sewage sludge treated by a wet oxidation process was carried out. High organic matter (up to 85% in COD) and Total Solids content (up to 75%) removal values were achieved at elevated temperature (up to 300 ºC) and pressure (up to 200 bar) conditions. The liquid and solid fractions found in oxidation process effluent contain amounts of phosphorus that can be recovered. This research aims to maximize its valorization in both liquid and solid fractions. In the liquid effluent, phosphorus was recovered (up to 90 mg P L-1) by chemical precipitation as struvite (MgNH4PO4∙6 H2O), a slow-release fertilizer. In this case, P recoveries greater than 95% were achieved. Also, the solid fraction, analyzed after filtration and drying (68 mg P gsolid-1), was treated by acid leaching, to achieve up to 60% phosphorus recovery. All phosphorus extracted was in orthophosphate form.

Providing safe drinking water to people in developing countries is an urgent world-wide water problem and a main issue in the UN Sustainability Goals. One of the most efficient and cheapest methods to attain these goals is the use of slow sand filters. Slow sand filters can efficiently provide safe drinking water to people living in small rural communities not served by central water supply systems. The purpose of this review article is to critically summarize and synthesize features and advantages of slow sand filtration methods to improve the quality of drinking water with special focus on less-developed countries. Even though slow sand filtration is an old technique, its efficiency and cost-effectiveness make it important to continue to develop the method in parallel to other chemical and biological methods. Thus, there are needs to continue to develop methods for slow sand filtration combined with simple disinfection techniques for treatment of microbiological pollutants such as bacteria, microbes, viruses, and parasites. These techniques can be applied before or after the sand filter application. Studies are also needed to investigate other types of porous material in areas where suitable sand and gravel are not readily available. Methods are needed to reduce the contents of emerging environmental pollutants such as surfactants and microplastics. Also, further studies are needed to determine design criteria (particle size distribution, depth of media, residence time, temperature, etc.) for different types of pollutants, existing and emerging. Finally, further research is needed to advise on life cycle time, operation (e.g., batch or continuous flow), and maintenance procedures (cleaning of media, back-flushing, etc.) for used porous media in slow the sand filtration.

Accurately glacier mapping is crucial for understanding climate change impacts, but existing efforts may be biased due to overlooking spatial autocorrelation during map validation. To address this, we compared several widely used machine learning algorithms as gradient boosting machines (GBM), k-nearest neighbor (KNN) and random forest (RF) with parametric logistic regression (GLM) and an unsupervised remote sensing-based method (NDSI) for mapping Peru's glacier regions in a thoughtful experimental setup. Spatial and non-spatial cross-validation methods were used to evaluate model’s performance and compared with a fully independent test set. Performance differences of up to 18% were found between bias-reduced (spatial) and overoptimistic (non-spatial) cross-validation results when compared to independent test set, emphasizing the need to consider spatial autocorrelation when using machine learning for glacier mapping. K-nearest neighbors (KNN) was the overall best model across regions consistently demonstrating the highest performance followed by logistic regression (LR) and gradient boosting machines (GBM). Our novel validation approach, accounting for spatial characteristics, provides valuable insights for glacier mapping studies and future efforts on glacier retreat monitoring. Incorporating this approach improves the reliability of glacier mapping, guiding future national-level initiatives.

In contrast to “frank” pathogens, like Salmonella entrocolitica, Shigella dysenteriae, and Vibrio cholerae, that always have a probability of disease, “opportunistic” pathogens are organisms that cause an infectious disease in a host with a weakened immune system and rarely in a healthy host. Historically, drinking water treatment has focused on control of frank pathogens, particularly those from human or animal sources (like Giardia lamblia, Cryptosporidium parvum, or Hepatitis A virus), but in recent years outbreaks from drinking water have increasingly been due to opportunistic pathogens. Characteristics of opportunistic pathogens that make them problematic for water treatment include: 1) they are normally present in aquatic environments, 2) they grow in biofilms that protect the bacteria from disinfectants, and 3) under appropriate conditions in drinking water systems (e.g., warm water, stagnation, low disinfectant levels, etc.) these bacteria can amplify to levels that can pose a public health risk. The three most common opportunistic pathogens in drinking water systems include Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa. This report focuses on these organisms to provide information on their public health risk, occurrence in drinking water systems, susceptibility to various disinfectants and other operational practices (like flushing and cleaning of pipes and storage tanks). In addition, information is provided on a group of nine other opportunistic pathogens that are less commonly found in drinking water systems, including Aeromonas hydrophila, Klebsiella pneumoniae, Serratia marcescens, Burkholderia pseudomallei, Acinetobacter baumannii, Stenotrophomonas maltophilia, Arcobacter butzleri, and several free-living amoebae including Naegleria fowleri and species of Acanthamoeba. The public health risk for these microbes in drinking water is still unclear, but in most cases, efforts to manage Legionella, mycobacteria, and Pseudomonas risks will also be effective for these other opportunistic pathogens. The approach to managing opportunistic pathogens in drinking water supplies focuses on controlling the growth of these organisms. Many of these microbes are normal inhabitants in biofilms in water, so the attention is less on eliminating these organisms from entering the system and more on managing their occurrence and concentrations in the pipe network. With anticipated warming trends associated with climate change, the factors that drive the growth of opportunistic pathogens in drinking water systems will likely increase. It is important, therefore, to evaluate treatment barriers and management activities for control of opportunistic pathogen risks. Controls for primary treatment, particularly for turbidity management and disinfection, should be reviewed to ensure adequacy for opportunistic pathogen control. However, the major focus for the utility’s opportunistic pathogen risk reduction plan is the management of biological activity and biofilms in the distribution system. Factors that influence the growth of microbes (primarily in biofilms) in the distribution system include, temperature, disinfectant type and concentration, nutrient levels (measured as AOC or BDOC), stagnation, flushing of pipes and cleaning of storage tank sediments, and corrosion control. Pressure management and distribution system integrity are also important to the microbial quality of water but are related more to the intrusion of contaminants into the distribution system – rather than directly related to microbial growth. Summarizing the identified risk from drinking water, the availability and quality of disinfection data for treatment, and guidelines or standards for control showed that adequate information is best available for management of L. pneumophila. For L. pneumophila the risk for this organism has been clearly established from drinking water, cases have increased worldwide, and it is one of the most identified causes of drinking water outbreaks. Water management best practices (e.g., maintenance of a disinfectant residual throughout the distribution system, flushing and cleaning of sediments in pipelines and storage tanks, among others) that have been shown to be effective for control of L. pneumophila in water supplies. In addition, there are well documented management guidelines available for the control of the organism in drinking water distribution systems. By comparison, management of risks for Mycobacteria from water are less clear than for L. pneumophila. Treatment of M. avium is difficult due to its resistance to disinfection, the tendency to form clumps and attachment to surfaces in biofilms. Additionally, there are no guidelines for management of M. avium in drinking water and one risk assessment study suggested a low risk of infection. The role of tap water in the transmission of the other opportunistic pathogens is less clear and in many cases actions to manage L. pneumophila (e.g., maintenance of a disinfectant residual, flushing, cleaning of storage tanks, etc.) will also be beneficial in helping to manage these organisms as well.

Water reuse is critical to national development, sustenance, and survival in this era of climate, demographic, and social changes. There is no national systemic approach to address the challenge systematically. The paper presents a framework and a method to develop a national research strategy for water reuse. It presents an ontology of water reuse strategy that encapsulates the combinatorial complexity of the problem clearly, concisely, and comprehensively. Subsequently, it discusses the method to use the framework to develop a national strategy, adapt it through feedback and learning, and ultimately effect a revolutionary change in the strategy for water reuse.

This research is focused on two key areas. The first is mapping the 2022 flood in the Red River of the North near Grafton, North Dakota, US, and the second is evaluating the scour potential of the Grafton Bridge. Local scour of bridge piers can cause hydraulic structures such as bridge piers and abutments to fail during floods, making it a crucial area of investigation. To collect bathymetry and discharge data during low and high flow conditions, including a flood event with a 16.5-year return period in 2022, an Autonomous Surface Vehicle (ASV) incorporated with LiDAR DEM (Digital Elevation Model) data obtained from the US Geological Survey (USGS) National Map was used. Flood mapping and evaluation of local scour around the bridge pier were conducted using the HEC-RAS 6.0.0 software, which utilizes the Colorado State University method as a default equation. This research demonstrates the potential of ASVs in collecting critical data and LiDAR DEM data is an efficient method for flood mapping and determining scour potential, as it integrates bathymetry, flow velocity, and flood prediction.

Many of the current strategies for removing pollutants from water are based on nanomaterials and 18nanotechnology. Lower values of Biological Oxygen Demand (BOD5) and Chemical Oxygen De- 19 mand (COD) in water results in reduction in the amount of oxidizable pollutants. We present a study 20 on the reduction of COD and BOD5in water from Wadi El Bey River (Tunisia), using magnetite na- 21 noparticles (MNPs) and magnetic fields. The COD and BOD5 removal reached values higher than 22 50% after 60 min, with optimum efficiency at pH values of ≈8 and for MNPs concentrations of 1 g/L. 23 The use of a permanent magnetic field (0.33 T) showed an increase of COD and BOD5 removal from 2461% to 76% and from 63% to 78%, respectively. This enhancement is discussed in terms of the MNPs 25coagulation induced by the magnetic field and the adsorption of ionic species onto the MNPs sur- 26face due to Fe3O4 affinity.

Global concerns of decreasing water availability and food security are being exacerbated by the increasing demand for food, water quality degradation, and climate change impacts. Rice is an essential crop for food security with paddy rice cultivation largely practiced using traditional flooding conditions. Water regimes and components of the soil water balance in paddy rice catchments affect uptake of water by rice roots. Paddy management, especially puddling, significantly affects soil hydrological properties, such as hydraulic conductivity, percolation, and seepage in the paddy rhizosphere. Improved knowledge of these interactions is vital for developing sustainable water management strategies in paddy fields. Alternate Wetting and Drying (AWD) practice contributes to sustainable water management, but little is known about effects of soil wetting and drying duration on gravitational soil water flow, moisture dynamics, and hydraulic conductivity in the rice paddy rhizosphere. These factors depend on soil type, rice variety, rooting conditions, and environmental factors, such as solar radiation and temperature. Here we examine the paddy cultivation environment and soil properties under traditional continuous flooding and AWD practice. Some studies indicate that the duration and frequency of wetting and soil drying under AWD practice in paddy fields affects soil hydraulic conductivity that alters the next cycle of water application. During droughts and short rainy seasons, rainfall, soil properties, and atmospheric conditions control soil moisture dynamics in paddy fields. Limitations and challenges of applying AWD in paddy soils, including the variation of hydrological properties and the need for frequent field manual monitoring of water level (WL) head, are discussed. Implications of AWD practice on yield, water use efficiency, soil hydrology, and reduction of methane emissions, are outlined along with opportunities to improve AWD integration within government policies, irrigation schemes, and adoption by farmers. Coupled crop models can provide important insights for sustainable agricultural water management.

The efficiency of a new composite material of the layered double hydroxide (LDH) of ZnMgAl and rice husk biochar (RHB) for the removal of Cu(II) and Pb(II) ions from synthetic wastewater was investigated in this study. The images of scanning electron microscope showed extremely fine crystalline LDH particles decorated on the rough surface of the RHB while the succesful formation of the composite adsorbent (LDH/RHB) was confirmed by the corresponding energy dispersive X-ray and the Fourier-transform infrared spectroscopy. An equilibrium contact time of 30 and 15 min for Cu2+ and Pb2+, respectively, was proposed for the optimum performance of the batch adsorption process. The dose of the LDH/RHB adsorbent was optimized at 0.4 g yielding maximum adsorption capacities of 117 and 124 mg g-1 for Cu2+ and Pb2+, respectively, with corresponding maximum removal efficiencies of nearly 94% and 99%. The initial meta concentrations was optimized at 50 or 60 mg L-1 corresponding to maximum removal efficiencies or adsorption capacities. For the changing initial metal’s concentration, the removal efficiencies remained unchanged for up to 50 mg L-1 and decreased by about 50% by increasing the initial concentrations from 50 to 100 mg L-1. The adsorption capacities observed a linear increasing trend by increasing the initial concentrations from 5 to 60 mg L-1 and remained unchanged afterward up to 100 mg L-1. A solution pH of 6.0 yielded optimum results with an increasing trend in adsorption capacities and percentage removal by changing the solution pH from 2.0 to 7.0. Based on the best-fit of the pseudo second-order kinetic model to the experimental data, the chemisorption was suggested to be the controlling mechanism of adsorption. The fitting of the Langmuir model suggested a monolayer sorption of Cu2+ and Pb2+ in addition to a heterogeneous adsorption as supported by the fitting of the Temkin isotherm. The application of the Dubinin–Radushkevich isotherm proposed a physical adsorption (mean free energy of adsorption less than 8 kJ mol−1) of both heavy metal ions on the surface of the LDH/RHB adsorbent.

Water contamination has intensified over the year as the world's population and industrial activities have grown. Heavy metals (HMs) are amongst the environmental contaminants commonly found in water and wastewater. These include Lead, Manganese, Chromium, Mercury, etc. Various techniques have been used to remediate this environmental challenge and adsorption has proven to be more effective because it is simple to use, excellent efficiency, low cost, possibility to operate in several experimental conditions. Regrettably, this method yields waste materials, which represents a scaling restriction. Furthermore, after the HM has been removed and loaded onto the adsorbent, there is still a question of the fate of the metal-loaded adsorbent. Most of the time these metal loaded adsorbents are discarded in the environment and constitute a secondary pollution. New applications for heavy metals laden have been investigated. This review article presents the various applications that had been investigated to reuse the loaded metal adsorbent. A case study on developing tools for combatting gender-based violence (GBV) has also been discussed.

Temporary streams are a key component of the hydrological cycle in arid and semi-arid regions, but their flow is highly variable and difficult to measure. In this paper, we present a novel approach that could be used to assess the flow of temporary streams and characterize their environmental status. Specifically, we apply the Image Velocimetry method to estimate surface velocity in temporary streams using unmanned aerial vehicles (UAVs) equipped with optical sensors (IV-UAV method). The IV-UAV method enables the easy, safe and quick estimation of the velocity on the water’s surface. This method was applied in different temporary streams in Lesvos Island, Greece. The produced results show that the IV-UAV can be implemented at low discharges, at temporary streams and at small streams. However, there were many occasions that measurements were unable due to various reasons such as dense vegetation or archaeological sites. Despite of this, the proposed methodology could be incorporated in optical protocols which are used to assess the environmental status of temporary streams of Mediterranean conditions. Finally, this would become a valuable tool for understanding the dynamics of these eco-systems and monitoring changes over time.

Elucidating physicochemical processes in the degradation of pollutants may optimize their removal from water sources. This work presents a set of elementary steps in the photocatalytic degradation of carbamazepine (CBZ), assuming a steady state approximation in an Advanced Oxidation Process (AOP) combining short-wave ultraviolet radiation (UVC), homogeneous reagent (H₂O₂) and heterogeneous (TiO₂) catalyst. Elementary steps include excitation of both reagent/catalysts by UVC photons, adsorption of CBZ on the excited TiO₂, or its oxidation by hydroxyl radicals. Assuming the steady state approximation on the intermediate products (excited TiO₂, CBZ- excited TiO₂ complex, and hydroxyl radicals), leads to rate laws for degradation of CBZ, in which UVC radiation, TiO₂, and H₂O₂ are pseudo first order at all concentrations or intensities having no direct influence on CBZ pseudo-order, whereas CBZ shifts from pseudo first order at low concentrations to pseudo-zero order at high concentrations. Several experiments to test the mechanism were conducted, by varying CBZ, H₂O₂, and TiO₂ concentrations, and UVC radiation intensities. Measured results indeed fit the suggested mechanism for the first three, but irradiation intensity appears to shift CBZ influence from pseudo-second to pseudo-first order with increased intensities. Corrected elementary steps are proposed to fit the results.

The degradation of the persistent compound perfluorooctanoic acid (PFOA) in water by ultraviolet light in the presence and absence of hydrogen peroxide was examined. A laboratory experiment was designed to answer the question: is UV spectrophotometry feasible for PFOA research? Spectrophotometry was able to measure the degradation of PFOA, but a very high concentration was required. The 1 mg/L used is very concentrated when compared to the 70 ng/L suggested level in drinking water. A UV/Visible diode array scanning spectrophotometer was used to measure changes in PFOA concentrations after 15-minute exposures to ultraviolet light and ultraviolet light with hydrogen peroxide. A noticeable drop in concentration was measured for a 1 mg/L sample. The reaction kinetics were calculated and are likely skewed due to the greater concentration of experimental PFOA. These preliminary results will allow for the next phases of PFOA research to commence, including confirmation through liquid chromatography/mass spectrometry of low concentrations and developing bioremediation techniques.

In this study, Plasma-Activated Water (PAW) was synthesized using a coaxial Dielectric Barrier Discharge (DBD) reactor, benefiting from the elevated capacity of air-flow-assisted DBD discharges to enhance nitrogen-based species concentration. By manipulating operational parameters, including gas flow rate, activation time, and DI water volume, we achieved significant concentrations of Reactive Oxygen and Nitrogen Species (RONS). As a result, the PAW obtained displayed pronounced physicochemical attributes: a pH of 2.06, an ORP of 275mV, conductivity of 3mS/cm, and TDS of 1200 mg/L. A pivotal aspect of this research was the evaluation of the reactor's efficiency, as indicated by metrics like the specific input energy and ozone efficiency yield. The antimicrobial potential of the PAW was also assessed against pathogenic microbes, with remarkable reductions in viability for both Staphylococcus aureus and Escherichia coli (99.99%) and a more moderate decrease for Candida albicans (37%). These findings underscore the capability of the coaxial DBD reactor in crafting high-quality PAW with significant antimicrobial properties, necessitating further studies to validate its broad-spectrum and safe application.

Water is an essential commodity to sustain life. The condition of water in Tiruchirappalli was measured using different Physicochemical parameters like Temperature, pH, TDS, Total Solids, Salinity, Total Hardness, and Electrical Conductivity. Water samples were collected from different places in Tiruchirappalli city, Tamil Nadu. Water samples were examined by different chemical methods. According to the results, Thiruvarambur-1 showed comparatively higher results in the case of every parameter compared to other sampling stations. Obtained results were further interpreted using statistical tools. Considering ECs as a principal component for the regression and correlation analysis with other parameters significant correlation was found. A strong correlation was observed between ECs and TDS, Total Hardness, Turbidity, and Salinity.

Sea level rise (SLR) is a critical consequence of climate change, posing significant threats to coastal regions worldwide. Accurate and efficient assessment of potential inundation areas is crucial for effective coastal planning and adaptation strategies. This study aims to explore the utility of free and open source software for geospatial (FOSS4G) tools for mapping SLR inundation, providing cost-effective solutions that are accessible to researchers and policymakers. We employed a combination of geospatial data, including high-resolution elevation models, tidal data, and projected SLR scenarios. Utilizing widely available FOSS4G tools like QGIS, GDAL/OGR and GRASS GIS we developed an integrated workflow to map inundation extents using a passive bathtub approach for various SLR scenarios. Our findings demonstrate that FOSS4G tools offer reliable and accessible means to map SLR inundation, empowering stakeholders to assess coastal vulnerabilities and devise sustainable adaptation measures. The open-source approach facilitates collaboration and reproducibility, fostering a comprehensive understanding of the potential impacts of SLR on coastal ecosystems and communities.

Disasters related to climate change on our water resources are on the rise in terms of scale and severity. Therefore, predicting groundwater levels (GWL) is a crucial means to aid adaptive capacity towards disasters related to climate change in our water resources. In this study Gradient Boosting (GB) regression modelling approach for GWL prediction as a function of rainfall and antecedent GWL is used. Firstly, we sought to demonstrate the effects of rainfall changes on our groundwater resources through a Mann-Kendall trend analysis. Secondly, we evaluated the relationship between the input and response variables and determined the optimal lag times between the variables using autocorrelations and cross-correlations. Lastly a predictive model was developed for eight groundwater stations in the Upper Crocodile. 50 % of the groundwater stations revealed declining trends, while 25% had no trends and the other 25% showed an increasing trend. Generally low cross-correlation maximum (CCmax) were obtained, with the highest CCmax being 0.299 at an optimal lag of 2-month. While the highest autocorrelation was 0.969 at a 1-month lag. The best groundwater predictive model had R2 and MSE of 0.66 and 0.06, respectively. The stations that generally performed better had both high autocorrelation and cross-correlation coefficients. GB model performed satisfactorily in predicting GWL for most of the stations in the study area. Therefore, GB can be used for GWL prediction in the Upper Crocodile.

Calabar is a city where 65 per cent of people are living in poverty in informal settlements with low and decreasing access to improved water. In the low-income informal areas of the city, residents are being made responsible for securing their own water supply through several coping strategies. This paper explores the decreasing access to water and coping strategies to shortage in Calabar, Nigeria. It analyses two complementary pieces of data: (i) the households’ coping strategies and (ii) satisfaction with improved water services. A mixed method was introduced and data was collected via fieldwork at three settlements in Calabar. A household survey of 360 respondents, 27 in-depth interviews and 2 focus groups were conducted. Findings show that households engaged in different coping strategies to access water, including conservation (changing routine/reusing), purchasing (spent a significant proportion of their income on buying water) and pumping as a coping strategy. The household's tenure, socioeconomic status and water accessibility determines their decision to move if services are not provided. A crucial differentiation exists between a larger population being granted less access to water versus certain individuals receiving access to a greater quantity of water.

In water scarcity regions, using data-driven approaches to predict groundwater level is challenging due to limited data availability. However, these regions have substantial water needs and require cost-effective groundwater utilization strategies. In this study, we use artificial intelligence to predict groundwater levels to provide guidance for drilling shallow boreholes for subsistence irrigation. The Bilate watershed, which is located in southern Ethiopia, was selected as the study area. This is typical of areas in Africa with high demand for water and limited availability of well data. Using a non-time-series database of 75 boreholes, machine learning models including multiple linear regression, multivariate adaptive regression spline, artificial neural networks, random forest regression, and gradient boosting regression (GBR) were constructed to predict the depth to the water table. 20 independent variables were considered in the models. GBR performed the best of the approaches with an average 0.77 R-squared value on testing data. Finally, a map of predicted water levels in the Bilate watershed was created based on the best model with water levels ranging from 1.6 to 245.9 meters. With the limited set of borehole data, the results show a clear signal that can provide guidance for borehole drilling decisions for sustainable irrigation with additional implications for drinking water.

This study was investigate the possible hydrological impact of climate change in stream flow of Arba River based on the downscaled precipitation and temperature data at West Harerghe Zone, Oromia regional state, Ethiopia. The case study, Arba River is one of the tributaries of Awash River Basin and the catchment of the river at Bordode flow gauging station covers around 72 square kilometers. Dynamically downscaled Regional Climate Model (RCM) HIRHAM derived by ICHEC-EC-EARTH global climate model under two scenarios RCP 4.5 and 8.5 was used in this study. The future time periods are divided into two time horizons with equal length of time as the base line period 2021–2050 and 2051–2080. For both projected periods relatively the minimum average monthly percentage change in precipitation will be happened from May to October under RCP4.5 except August and from March to October under RCP8.5. The variation under RCP4.5 is relatively high when compared to RCP8.5. The average monthly per-centage of flow increment may vary from (7.6 to 81.8) for 2021-2050 and (22.3 to 107.8) for 2051-2080 under RCP4.5. Under RCP8.5 scenario, from July to January except the December for 2021-2050, simulated flow is expected to increase while from February to June decreases for both time horizons. Generally, the change of simulated flow under both scenarios and both near and far time period is follows the pattern of precipitation. However, the flow change will have less variation than the precipitation change.

Micro nano bubbles (MNBs) can generate ·OH in situ, which provides a new idea for the safe and efficient removal of pollutants in water supply systems. However, the difficulty in obtaining stable MNBs causes the low efficiency of ·OH generation, which makes the inability to guarantee the removal efficiency of pollutants. This paper reviews the application research of MNBs technology in water security from three aspects: the generation process of MNBs in water, the generation rule of ·OH during MNBs collapse, and the control mechanism of MNBs on pollutants and biofilms. We found that MNBs generation methods are divided into chemical and mechanical (about 10 kinds) categories, and the instability of bubble size restricts the application of MNBs technology. The generation of ·OH by MNBs is affected by pH, gas source, bubble size, temperature, external stimulation. And pH and external stimulus have more influence on ·OH generation in situ than other factors. Adjusting pH to alkaline or acidic conditions and selecting ozone or oxygen as the gas source can promote the ·OH generation. MNBs’ collapse also releases a large amount of energy, which the temperature and pressure can reach 3000K and 5Gpa respectively, making it efficient to remove ≈90 % of pollutants (i.e., trichloroethylene, benzene, and chlorobenzene). The biofilm can also be removed by physical, chemical, and thermal effect. MNBs technology also has great application potential in drinking water, which can be applied to improve water quality, optimize household water purifiers, and enhance the taste of bottled water. Under the premise of safety, let people of different ages taste, finding that compared with ordinary drinking water, 85.7 % of people think MNBs water is softer, 73.3 % of people think MNBs water is sweeter. This further proves that MNBs water has a great prospect in the drinking water application. This review provides innovative theoretical support for solving the problem of drinking water safety.

We analysed changes in magnitude and timing of the largest annual observed daily flow (Amax), in each water year, for 596 stations in high-value water resources catchments and flood risk locations across Australia. These stations are either included in the Bureau of Meteorology's Hydrologic Reference Stations, or used in its operational flood forecasting services. Monotonic trend (which are either consistently increasing or decreasing) analyses of the magnitude and timing of flood peaks (estimated using Amax) were performed using Theil-Sen and Mann-Kendell approach and circular statistics to identify strength of seasonality and timing. Regional significance at the drainage division scale was analysed using the Walker test. Monotonic decreasing trends in Amax flood magnitude were detected in the Murray-Darling River basin and in other drainage divisions in Victoria, south-west and mid-west of Western Australia and South Australia. No significant obvious pattern in Amax magnitude was detected in northern Queensland, coastal NSW, central Australia and Tasmania. Only the Tanami-Timor Sea Coast drainage division in northern Australia showed monotonic increasing trends. Monotonic trends in Amax magnitude were regionally significant at the drainage division scale. We found two distinct patterns in flood seasonality and timing. In the northern and southern parts of Australia, flood peaks generally occur during February to March and August to October, respectively. The strength of this seasonality varies across the country. Weaker seasonality was detected for locations in the Murray-Daring River basin, and stronger seasonality was evident in northern Australia, south-west of Western Australia, South Australia, Victoria and Tasmania. The trends of seasonality and timing reveal that in general, flood peaks are occurring later in the water year in recent years. In northern Australia, flood peaks are generally occurring earlier – at a rate of 12 days/decade. In Victoria, New South Wales and Tasmania, trends in timing are generally mixed. However, in the south-west of Western Australia, the largest change in timing was evident – with Amax peaks commencing later at a rate of 15 days/decade. Decadal variability in flood timing was found at the drainage division scale as well. Most stations show a decreasing trend in Amax magnitude, but how that trend is associated with the change in timing is not clear.

This study identified and mapped worldwide surveillance actions and initiatives of drinking water quality implemented by government agencies or public health services. The scoping review was conducted between July 2021 and August 2022 based on the Joanna Briggs Institute. The search was performed in relevant databases and grey literature; 49 studies were obtained. Quantitative variables were presented as absolute and relative frequencies, while qualitative variables were analyzed using the IRaMuTeQ software. The actions developed worldwide and their impacts and results provided four thematic classes: (1) assessment of coverage, accessibility, quantity, and drinking water quality in routine and emergency situations; (2) analysis of physical-chemical and microbiological parameters in public supply networks or alternative water supply solutions; (3) identification of household water contamination, communication, and education with the community; (4) and investigation of water-borne disease outbreaks. Preliminary results were shared with stakeholders to favor early knowledge dissemination.

In this study, we examine the possibility of proactive floodwater diversion to fields via backwater in numerical experiments using multiple elevation data products with different spatial resolutions and explore the optimal timing of water diversion from the perspective of crop calendars. First, a comparison of the elevation data products revealed that photogrammetric data can capture microtopography, such as the footpaths between rice paddies and drainage channels around a field. Numerical experiments using two elevation data products, 5mDEM and LP-derived approximately 5mDEM, revealed that floodwater diversion can reduce the peak to about 19.2 m3/s when using the 5mDEM and can reduce the peak to 16.0 m3/s when using the LP-derived approximately 5mDEM. Interviews with land improvement districts and a review of previous studies revealed that the ear-burst period is particularly vulnerable to flooding. Although the effect of flood peak reduction is reduced due to flooding of the field, it is possible that floodwater can be channeled during the ripening period in August and in late September and October when the ears have been harvested.

Arsenic (As) contamination of groundwater is a common problem in BDP. The alkaline pH of the groundwater provides favourable condition for geomicrobiochemical processes, where organic matter also plays an important role in mobilization of As. The total arsenic content (AsT) of the groundwater is in the range of 69-178 µgL-1 with mean value of 118.58 µgL-1. The groundwater quality of monitored drinking water wells are related to local land–use pattern and rural sanitation installation and practices (which can have a strong influence on microbial contamination). The study indicates that As heterogeneity, probably a consequence of microbial heterogeneity is a feature of the study area. The excessive total and fecal coliform (TC and FC) count of the ponds possibly suggest uncontrolled surface run offs and sewage leakage, notably from nearby pit-latrine, which increased the microbial contamination in these water sources. The tube wells located in close proximity (~ 2-3 m) of the surveyed ponds are also contaminated with high TC and FC values, due to faulty water supply system, pond water infiltration and cracked tube well platforms. Coliforms may influence geomicrobiological processes in groundwater and thereby, contribute in As release and mobilization. The TC and FC values of monitored tube wells and ponds show seasonal variation, with high TC and FC values during wet season. Attempt has been made to focus on sanitation risk of the monitored wells (based on sanitation and fecal coliform scores) which is usually less explored. The sanitary risk score reveal the need of immediate attention to all the sites, as 25.0 %, 58.3 %, 11.1 % and 5 % of tube wells of the six sites fell under very high risk (sanitary risk score ≥ 9), high risk (sanitary risk score 6-8), intermediate risk (sanitary risk score 3-5) and low risk category (sanitary risk score 0-2), respectively. Fecal coliform score classified all the sites under intermediate risk category (FC count 10-100 per 100 ml of water). The predominance of As heterogeneity particularly in areas under high risk category (showing high TC and FC contamination) is observed along with the similar sinusoidal pattern of TC, FC and AsT content. Finally, this study shed light on the factors responsible for unsafe nature of monitored tube wells and the influence of anthropogenic activities on the microenvironment of the groundwater, which could be a probable reason behind the As heterogeneity in the groundwater of the study area.

Water pollution, driven largely by the discharge of organic dyes from various industrial processes, presents a grave environmental threat. This study delves into the promise of an innovative adsorptive composite material composed of chitosan and activated charcoal, offering a sustainable and efficient solution for removing methylene blue (MB) dye from water sources. Our comprehensive investigation encompasses the synthesis, characterization, and adsorption capabilities of this composite material, revealing its remarkable physicochemical attributes and its substantial capacity to adsorb MB dye. These findings establish it as a compelling candidate for water treatment applications. The assessment of adsorbent dosage shows a direct correlation between higher dosages and enhanced MB dye removal, with an optimal dosage determined at 0.4 g/25 mL. Furthermore, pH-dependent studies demonstrate exceptional performance at lower pH levels, achieving an impressive 95% removal rate at pH 3 after 240 minutes of contact time. The composite exhibits consistent high removal percentages across a wide range of MB dye concentrations, showcasing its adaptability. In terms of reaction time, the composite achieves peak adsorption capacity within the initial 360 minutes and maintains a stable equilibrium, sustaining an impressive 99% removal efficiency thereafter. This study underscores the eco-friendliness and cost-effectiveness of the composite material, emphasizing its potential to address water pollution challenges and promote sustainable water resource management. Overall, this research yields valuable insights into a practical approach for mitigating the adverse impact of organic dyes on aquatic ecosystems and public health.

The physiological characteristics of liquid digestate retrieved from various biogas plants based in northern Greece are presented. Preliminary photocatalysis experiments on inoculated liquid di-gestate sampled showed that disinfection is possible when pre-treated digestate with a combination of centrifuge-flocculation-μFiltration after 5.5 hours of 0.7g/L suspended TiO2 under UVA illumination for the experimental conditions is used. A novel design photocatalytic nanofiltration reactor was implemented for disinfection experiments on pre-treated liquid digestate, giving promising results. This work sets the basis for the efficient operation and engineering application of technology collaboration with photocatalysis as the final step for liquid digestate sanitation and reusable water recovery.

This article analyzes 6 probability distributions from the Generalized Pareto family, with 3, 4 and 5 parameters, with main purpose to identify other distributions from this family with applicability in flood frequency analysis compared to the distribution already used in the literature from this family such as Generalized Pareto Type II and Wakeby. This analysis is part of a larger and more complex research carried out in the Faculty of Hydrotechnics regarding the elaboration of a norm for flood frequency analysis using the linear moments method. In Romania, the standard method of parameter estimation is the method of ordinary moments, thus the transition from this method to the method of linear moments is desired. All the necessary elements for the distributions use are presented like, the probability density functions, the complementary cumulative distribution functions, the quantile functions, the exact and approximate relations for estimating parameters, for both methods of parameters estimation. All these elements are necessary for a proper transition between the two methods, especially since the use of the method of ordinary moments is done by choosing the skewness of the observed data depending on the origin of the maximum flows. A flood frequency analysis case study, using annual maximum and annual exceedance series, was carried out for the Prigor river, to numerically present the analyzed distributions. The performance of this distributions is evaluated using relative mean error, relative absolute error and linear moments diagram.

In the presence of aquatic plants in streams, a variety of flow structures have been reported. Re-sults of earlier investigations indicated that the hydrodynamic features of flows in rivers, and streams are influenced by a wide range of submerged and non-submerged vegetation. In the pre-sent study, eight experiment runs were conducted in two artificial pools built in a laboratory flume to assess the flow structures across vegetation cover. The slopes for entrance and exit sec-tions of these two pools are of 5 and 10 degrees, respectively. A patch of artificial grass covered the entire pool area over the gravel bed. The effect of stream flow velocity was investigated by considering two aspect ratios of 2 and 2.7. Also, distributions of flow velocity, Reynolds normal and shear stresses, turbulence intensities, turbulent kinetic energy (TKE), and higher-order mo-ments of velocity fluctuations have been investigated. By means of quadrant analysis, it is found that the skewness coefficients of velocity profiles are significant parameters to evaluate. Based on skewness values for the bursting processes, along the pool entrance section with a smaller slope, the contribution of sweep motion occurs in a more restricted zone above the canopy, and this im-plies that the ejection motion occurs in a pool entrance section with a higher slope. Immediately above the vegetation canopy, the dominant process is the sweep motion of bursting events. Whereas, at the upstream boundary of the vegetation patch, an outward motion with slightly pos-itive value occurs; and around the downstream boundary of the vegetation patch, the isotropic turbulence appears at the boundary of the vegetation and gravel bed. Over the vegetation canopy in the pool, less mixing eddies result in lower Reynolds shear stress values, and thus the turbulent flow becomes weak with lower turbulent kinetic energy (TKE). Because of the shallow flow in an artificial channel with an aspect ratio less than five and the availability of vertical non-zero ve-locity components, secondary currents become stronger in the channel. Consequently, there is a divergence from a linear dispersion of Reynolds shear stress.

Managing Water, Energy, and Food (WEF) resources within socio-environmental systems demands innovative strategies that provide decision-makers with actionable insights. This article explores the challenges and potential solutions of employing Focus Maps and choremes as a novel approach for assessing anthropogenic impacts and enhancing the visualization of the WEF Nexus in specific geographic areas. By integrating geospatial data, multi-criteria analysis, and involving stakeholders, our research aims to develop Choreomatic Focus Maps (CFMs) that offer a comprehensive spatial representation of the WEF Nexus, facilitating better-informed decision-making at the community level. Our current work outlines visualization of WEF Nexus, as an initial stages of creating CFMs through a detailed step-by-step process. This includes identifying the main drivers for WEF nexus, such as anthropogenic activities and their distribution, evaluating environmental factors, linking anthropogenic impact with environmental indicators over time, and conducting on-site validation. Our focus is on advancing through these crucial steps, particularly emphasizing field validation within the Local Decision-Makers Tools, visualized here by using Focus Maps. This phase is vital for ensuring our approach is grounded in reality and meets the needs of the communities within the Danube Delta region. By doing so, we aim to provide a visual summary of the WEF Nexus that not only captures the complexity of this fragile ecosystem but also incorporates local insights and priorities, identifying key areas where human activities have significant impacts.

Understanding the hydrological behavior of watersheds and their driving factors is crucial for sustainable water resources management. However, at large scales, this task remains challenging due to the spatial heterogeneity in landscapes, topography, land use, geology, and soil properties. In this context, the aim of this study was to identify the key factors that influence the hydrological system of four watersheds: Ankavia (WS1: 55% forest cover), Ankaviabe (WS2: 77% forest cover), Sahafihitry (WS3: 41% forest cover), and Antsahovy (WS4: 48% forest cover), over a 10-month study period. These catchments are located within the SAVA region of northeastern Madagascar and have a humid-tropical climate. We investigated the relationship between selected catchment descriptors (CD) and hydrological signatures (HS) by using a Pearson coefficient-based correlation matrix. More specifically, CD extracted from topography/morphology (T), land use (LU), soil (S), and geological characteristics (G) were correlated with HS, including base flow index (BFI), runoff coefficient (rc), peak flow (Qp), runoff event time scales (ts), high flows (Q5), low flows (Q95), and mean discharge (q_mean). The analysis revealed that land use, soil properties, and geology seem to be the best predictors for BFI and Q95, while soil properties mainly govern rc, Qp, Q5, ts, and q_mean. These findings provide valuable insights into the key drivers of hydrologic behavior that can inform water resource management strategies. In particular, WS2 has better flood buffering capacity but suffers from lower base flows in the dry season potentially due to higher evapotranspiration. Conversely, WS3 and WS4 (and to a lesser extent WS1) have lower flood buffering capacity, but these watersheds experience less pronounced low flows in the dry season due to higher base flow index resulting from lower evapotranspiration. The results emphasize the importance of sustainable land use practices and conservation efforts, which are essential for the sustainable development of the region. By incorporating these practices into water management strategies, we can help ensure a more stable and reliable water supply for communities and ecosystems within the region.

In the present work, a comparative evaluation of an MBBR unit performance was carried out for the following cases: when adding 3D-printed biocarriers fabricated with 13X and bentonite, when using K1 commercial biocarriers and when not adding biocarriers at all. For the evaluation of the MBBR efficiency, various physicochemical parameters were measured, while static light scattering and optical microscopy observations were additionally used. Finally, biofilm extracted from the biocarriers was evaluated. The findings suggest that there is an optimal biodegradation of the organic load in all MBBR units. The nitrification and denitrification process were improved at the 3D MBBR as compared to the control MBBR and MBBR K1. The dry mass of the biofilm in the 3D-printed biocarriers was two orders of magnitude larger than the one in the K1 biocarriers. What is more, in the K1 biocarriers the mass of the biofilm varied in relation to time, due to the fact that it could not be kept inside the holes, something that was not observed to happen with the 3D-printed biocarriers. Finally, it was observed, mostly in the 3D MBBR and less in the K1 MBBR, that the growth of nitrifying bacteria and heterotrophs inside the units increased the biomass production in the form of SMP, which in turn favored the adhesion of biomass on the surface of biocarriers.

In the era of mounting water scarcity, particularly in arid regions, the agricultural sector is striving to optimize the water resource management practices. Treated wastewater (TWW) has emerged as a viable alternative to freshwater for irrigation, offering a sustainable solution to water conservation. However, ensuring the safety and quality of TWW is paramount to safeguard for both crop health and environmental integrity. Electrical conductivity (EC), a critical factor in assessing TWW suitability for irrigation, can significantly impact crop yields and soil health since it is directly linked to the concentration of dissolved salts and ions. Therefore, this study delves into the development of advanced predictive models for EC assessment by employing supervised machine learning (ML) techniques like the Support Vector Regression (SVR), Adaptive Network-based Fuzzy Inference System (ANFIS), and Multiple Linear Regression (MLR). The TWW samples collected from Al-Qatif area, Saudi Arabia were assessed in the lab through a sensor-based real-time monitoring system integrated with Internet of Things (IoT) network and a multiprobe device. The key water quality parameters assessed involved, temperature (T), pH, Oxidation Reduction Potential (ORP), Resistivity (RES), Total Dissolved Solids (TDS), Salinity and Turbidity which served as the foundation for these models, given their profound influence on and their anticipated impact on EC levels. Following feature selection, two distinct model combinations were identified for the SVR, ANFIS and MLR models. Furthermore, to evaluate prediction performance, four statistical criteria, including coefficient of determination (R²), correlation coefficient (R), mean square error (MSE), and root mean square error (RMSE), were employed. Overall, the comparative performance results proved that ANFIS-M2 indicated the strongest predictive capability with the R² value of 0.99572 and 0.75145 and the RMSE values of 0.00965 and 0.01134, respectively in both calibration and verification stages.

Data-driven models based on artificial intelligence are efficiently used to solve complex problems. The quality of groundwater is of utmost importance, as it directly impacts human health and the environment. In major parts of the world groundwater is the main source of drinking water, it is essential to periodically monitor water quality. Conventional water quality monitoring techniques involve periodical collection of water samples and analysis in the laboratory. This process is expensive, time consuming and involves lot of manual labor. The aim of our study is to build an ant colony optimized neural network for predicting groundwater quality parameters. We have proposed artificial neural network comprising of six hidden layers. The approach was validated using our groundwater quality dataset of a hard rock region in the northern part of Karnataka, India. Groundwater samples were collected by us periodically from March 2014 to October 2020 from 50 wells in this region. These samples where analysed for measuring the pH, Electrical Conductivity, Na+, Ca+, Na+, K+, Mg2+, F-, Cl- and U+. The temporal dataset was split for training, testing and validation of our model. Metrics such as R2 (Coefficient of Determination), RMSE (Root Mean Squared Error), NSE (Nash–Sutcliffe efficiencies) and MAE (Mean Absolute Error) were used to evaluate the prediction error and model performance. These performance evaluation metrics indicated the efficiency of our model in predicting the temporal variation in groundwater quality parameters. The method proposed by us can be used for prediction and the temporal frequency of sample collection can be reduced to save time and cost. The results also confirm that the combination of artificial neural network with ACO is a promising tool to optimize weights while training the network, and hence will help in reasonable prediction of groundwater quality parameters.

Japanese plums form part of a multi-billion rand deciduous fruit industry in South Africa. Despite this, there is a paucity of knowledge on the seasonal water requirements of plum orchards. In a time of changing climatic conditions and diminishing water resources, this gap in literature poses an imminent threat to the long-term sustainability and global competitiveness of the South African plum industry. Therefore, this paper aimed to provide a review of the available literature on the crop water requirements of full-bearing well-irrigated Japanese plum orchards for improved agricultural water management. Full-year water requirements for well-watered full-bearing Japanese orchards ranged between 921 and 1 211 mm a-1 with a mean value of 1 084 ±140 mm a-1. Canopy growth and pruning appeared to be the most common causes of differences in water requirement estimates. Growing season length also plays a role with late-season maturing orchards having higher water requirements than their early and mid-maturing counterparts. The knowledge review provided benchmark figures for the annual water requirements of Japanese plums. However further research is required to determine the water requirement of plums from planting to full-bearing age and the response of plum trees to water stress, in a South African context.

This study aimed to analyse the variation of recreational water quality in Plettenberg Bay in an attempt to comprehend the effects of pollution on the environment, and more specifically the potential impacts on the quality of surface water used for recreational activities. Plettenberg Bay is a major destination for tourists in South Africa, with recreational water activities representing an important attraction. For this study, data were obtained from Bitou Municipality, the local au-thority in charge of the water monitoring program in Plettenberg Bay. The selected datasets contained water quality data collected by the Bitou Municipality waterworks department in three sampling sites in Plettenberg Bay. The samples were tested for six water quality parameters namely, Ammonia, Suspended Solids, Conductivity, Nitrates/Nitrites, pH, and E coli. Water quality trends appeared stabile over the five years, with only a few parameters showing variation in their concentration levels. It is recommended that the Bitou Municipality increase the sampling frequency to allow a clearer understanding of water quality variation and to minimise potential uncertainties.

Aquifer water is the key staple to develop successful sustainable agricultural activity in newly reclaimed areas in Egypt. Monitoring irrigation water quality is necessary for a proper planning of this exhaustible resources. This work aims to evaluate the groundwater quality in the western newly reclaimed areas of Beni-Suef governorate. Fifty aquifer water sample were collected from wells scattered in the arid western Beni-Suef fringes during May of 2022. Water chemical analyses were conducted to estimate the parameters of Irrigation Water Quality Index (IWQI) namely the Electrical Conductivity (EC), Sodium (Na+), Chloride (Cl-), Bicarbonate (HCO3-) and the Adjusted percentage of Absorbed Sodium (SARo). The Inverse Distance Weighted (IDW) technique used to map the spatial distribution of aquifer water chemical characteristics and IWQI. The results showed that EC values were high in the south of the study area and decreased at its north and east borders. The results showed that the average of dissolved cations and anions were 236.4, 102, 77.5, 106.2, 309.6, 148.1 and 113 meq/l for Ca2+, Mg2+, Na+, K+, SO42-, HCO3-, and Cl-, respectively. Regarding to IWQI, its' values ranged from 28 to 81. Two-thirds of the study area classified as having moderate limitations for sustainable irrigation purposes. Furthermore, one-thirds of the area classified as having high restrictions.

This study presents a straightforward electrochemical and plasma deposition method for producing Cobalt-doped Blue-TiO2 nanotubes with enhanced catalytic properties. After a titanium plate has been anodized, specific procedures are carried out that cause oxygen vacancies to form inside the TiO2 nanostructures. The obtained catalysts were subjected to electrochemical tests (to identify charge transfer resistance and flat band potential), optical analysis (to determine the band gap and Urbach energy) and also characterized in terms of morphology, wettability and antibacterial effect in order to understand and analyze the impact of the Co doping method on the final catalyst characteristics. A hydrophilic film with star-shaped structures and with antibacterial effect was created when cobalt was electrochemically doped to Blue-TiO2 nanotubes. By using this electrochemical doping technique, the Urbach energy was raised from 1.171 to 3.836 eV while the band gap energy was decreased from 3.04 to 2.88 eV. Additionally, photodegradation experiments using artificial doxycycline (DOX) water were conducted to determine the practical relevance of the research findings. In areas like antimicrobial applications and photodegradation of DOX, these extra experiments aimed to show the practical applicability and potential advantages of the research findings.

In Tropical Monsoon climates, precipitation exceeds evapotranspiration, leading to increased surface runoff, especially in floodplain regions. The Bhagirathi-Hooghly River in India is the focus of the study, which analyses hydrology, sediment yield, and water balance in this floodplain area. This investigation employs the Soil and Water Assessment Tool (SWAT) model within the ArcGIS environment, using remote sensing data. The study area is divided into 4 sub-basins and 40 Hydrological Response Units (HRUs), with a focus on Land Use/Land Cover (LULC) parameters, soil attributes, and slope characteristics. Calibration (1998-2010) and validation (2011-2018) of river discharge and sediment yield are performed using the SUFI-2 algorithm within SWAT-CUP. The calibration process shows a strong correlation between observed and simulated data points, indicating the model's accuracy. The study reveals a pattern of early-year evapotranspiration followed by increasing rainfall during the monsoon season, leading to heightened surface runoff and sediment yield. Excessive rainfall, therefore, emerges as a pivotal driver of flood incidences within the floodplain. The insights derived from the SWAT model's floodplain data have the potential to inform flood control and sedimentation mitigation strategies. The assimilation of this data can empower local stakeholders and contribute to sustainable livelihoods and improved living conditions, offering guidance for future governmental policies.

The inner walls of drinking water distribution system (DWDS) are expected to be clean to ensure a safe quality of drinking water. In reality, complex physical, chemical and biological processes take place when water comes into contact with the pipe surface. This paper describes the impact of leaching different compounds from the water supply pipes into the drinking water and subsequent risks. Among these compounds there are heavy metals. It is necessary to prevent these metals to get into the DWDS. Those compounds are susceptible to impact the quality of the water delivered to population either by leaching dangerous chemicals into the water or by enhancing the development of microorganism growth on the pipe surface. The corrosion process of different pipes materials, scale formation mechanisms and the impact of bacteria formed in corrosion layers are discussed. Water treatment processes and the pipe materials also affect the water composition. Pipes materials act differently in the flowing and stagnation conditions. Also, they age differently (e.g metal based pipes are subjected to corrosion while polymer based pipes have a decreased mechanical resistance) and are susceptible to enhance bacterial film formation. This review helps to clarify what are the possible sources of compounds responsible for drinking water quality degradation. Also, it gives guidance on the measures that are needed to maintain a stable and safe drinking water quality.

The European Union Water Framework Directive (2000/60/EC; WFD) aims to achieve a good ecological and chemical status of all bodies of surface water by 2027. The development of an integrated guidance on surface water chemical monitoring (e.g. WFD Guidance Document No. 7/19) has been transferred into national German law (Ordinance for the Protection of Surface Waters, OGewV). For the majority of compounds, this act requires a monthly sampling frequency to assess the chemical water quality status of a surface water body. To evaluate the representativeness of the sampling strategy under the OGewV, high-frequency online monitoring data is investigated under different sampling scenarios and compared with current, monthly grab sampling strategy. About 23 million data points were analyzed for this study, three chemical parameters (dissolved oxygen, nitrate-nitrogen, chloride concentration) and discharge data were selected from four catchment of different sizes ranging from 51391 km² to 84 km² (Elbe, Vereinigte Mulde, Neiße and two stations at Lockwitzbach). In this paper we proposed short-term online-monitoring (STOM) as a sampling alternative. STOM considers the placement of online sensors over a limited duration and return interval. In general we: (I) compare the results of conventional grab sampling with STOM, (II) investigate the different performance of STOM and grab sampling using discharge data as proxy for analyzing event-mobilized pollutants and (III) investigate the related uncertainties and costs of both sampling methods. Results show, that STOM outperforms grab sampling for parameters where minimum/maximum concentrations are required by law as the probability to catch a single extreme value is higher with STOM. Furthermore, parameters showing a pronounced diurnal pattern, like dissolved oxygen, are also captured considerably better. The performance of STOM showed no substantial improvements for parameters with small concentration variability, as nitrogen-nitrate The analysis of discharge events as a proxy parameter for event-mobilized pollutants proved that the probability of capturing samples during events is significantly increased by STOM.

This paper addresses the issue of the automatic identification of river reaches and their planform type, given the (observed) set of geomorphic elements and units. It introduces further advances with respect to the original proposal by Nardini and Brierley. And it explores explicitly the ability of the algorithm and associated tools to work properly on significantly different rivers while adopting a given same parametrization. This was indeed an envisaged ability speculated as a challenging conclusion of the previous work. The Duqueco, Laja and Biobío rivers (Chile) are analyzed for this purpose. The conclusion is definitely positive, what opens future promising application horizons.

The feasibility of using zeolites, synthesized from components found in municipal solid waste fly ash (MSW-FA), as sorbents for the recovery of nutrients (nitrate and phosphate) and heavy metals is critically assessed in this review. The inherent drawbacks of utilising a highly contaminated, variable, and relatively Al- and Si-dilute source such as MSW-FA to synthesize zeolites are discussed, and different methods to extract and decontaminate zeolite precursor materials from MSW-FA are considered. Ways to synthesize tailored zeolites and how their properties as well as the operational conditions impact the adsorption of cations such as ammonium and heavy metals are summarized. The use of surface-modified zeolites to adsorb nitrate and phosphate is also reviewed. And subsequently, approaches to utilise directly or recover for reuse the adsorbed compounds are considered, discussing potential challenges and mitigating measures related to leaching of unwanted compounds from the zeolites. Moreover, the possibility to regenerate the adsorption capacity of the zeolites for multiple adsorption cycles is considered. In the final chapter of the review a more general discussion of the main challenges and existing research gaps is provided, giving directions for recommended studies.

The number of disputes related to water that reach courts in Chile has increased in the last decades, the topics of these disputes have become more complex, and the current conflict resolution system has not been able to adjust to this situation. This study analyses colonial texts from water-related conflicts that were addressed at the Royal Hearings in Santiago (1691-1800) and from the Cabildo gatherings (1541-1802), using an adaptation of the Institutional Analysis and Development framework. The research shows a strong institutional system surrounding conflict resolution during colonial times, with nested schemes and empowered figures appointed in leading roles. However, a lack of equity and inclusion of all actors is also visible, reducing its legitimacy. At present, the increasing value of water and a sense of distrust in the institutional system have led to longer and more complex conflict resolution processes. Here, learning from past times about the empowerment of the institutional system for solving water disputes could be useful. An increased support towards initial conflict resolution mechanisms, giving space for local knowledge and generating stronger participation in these initial steps, could also be a lesson for the future.

Despite the overall extension of the Amazon basin (approximately 6,000,000),which encompasses such a complex ecosystem and territories belonging to seven different nations, it is worth mentioning that environmental assessment related to changes in land use and land cover (LULC) in this region are often conducted respecting geopolitical boundaries associated with each country or taking into account the so-called Amazon biome. With the purpose of prospecting the intricate and hidden hydrological patterns, we undertake an in-depth evaluation of the water balance along the 2001-2021 time span across the whole basin, whose behavior depends on the features deriving from the metamorphoses in land use and land cover. To accomplish that task, the influence of the components of the water balance, namely rainfall and evapotranspiration, jointly with the terrestrial topographic mapping, are examined to investigate the interactions among the physical mechanisms that make up the hydrological cycle and the corresponding physical hydrological processes triggered by deforestation and reforestation in the region. More specifically, the modeling approach was rigorously designed to also consider, separately or not Negro, Solimões, Madeira, Tapajós and Xingu hydrographic sub-basins, which are the most important ones of the Amazon basin. The results highlight that, in the southern region of the Amazon, specifically within the Madeira river sub-basin, the lowest forest coverage is observed (56.0%), whereas in the northern Negro river sub-basin, the most notable forest coverage is observed (85.0%).The most preserved forest areas, such as the Negro and Solimões river sub-basins, with percentages of 81.9% and 74.2%, respectively, have higher annual rates of precipitation and evapotranspiration over time. On the other hand, regions that suffered the most intense deforestation along the time period studied, such as the Madeira, Tapajós and Xingu sub-basins, have lower annual rates of precipitation and evapotranspiration, with a preservation percentage of 54.6%, 62.6% and 70, 7%, respectively. As the pace of deforestation slowed between 2003 and 2013, annual precipitation rates increased by 12.0%, while evapotranspiration decreased by 2.0%. The hydrological findings of this paper highlight th predominant role of the forest in the context of the global water balance of the Amazon basin and the potential to also produce distinct impacts within different parts of the basin in terms of having more or less rainfall and evaporation. In addition, those variabilities in the hydrological operational components and mechanisms due to changes in land cover and land use also reveals the potential impacts that could be expected in the surrounding areas, closer or farther, notably beyond the limits of the Amazon basin.

Water pollution is regarded as a dangerous problem that needs to be resolved right away. This is largely due to the positive correlation between the increase in global population and waste production, especially food waste. Hydrogel beads based on sodium alginate (Alg) and pomegranate fruit peels (PP) were developed for the adsorption of Safranin O dye (SO) in aqueous solutions. The obtained Alg-PP beads were widely characterized. The effects of the contact time (0-180 min) and initial concentration (10-300 mg/l), the initial pH (2-10), the adsorbent dosage (1-40 g/l) and the temperature (293-333 K) were investigated through batch tests. The data proved that the adsorption kinetics of SO reached equilibrium within 30 min and up to 180 min. The adsorption data of SO onto synthesized beads follow the pseudo second-order model. The experimental data fitted very well to both Freundlich and Langmuir models. The maximum adsorption capacity of Alg-PP could reach 8.99 mg/g at 293 K. Calculation of Gibbs free energy and enthalpy indicated that adsorption of SO onto Alg-PP is spontaneous and endothermic. Finally, analysis of diffusion and mass transport phenomena were presented. The reported results revealed that the Alg-PP beads could be used as a novel natural adsorbent for the removal of cationic dye pollutants from aqueous environments.

The per capita availability of freshwater resources on a global scale is gradually decreasing due to population growth, rapid urbanization, industrialization, and modern lifestyles. In this situation, wastewater management becomes a major concern. Conventional treatment processes used to treat wastewater discharges are not adequate for the advanced removal of pollutants, especially refractory organic pollutants, which are mainly organic compounds that are not easily biodegradable in the environment. The use of photocatalytic membrane reactors (PMRs) for tertiary wastewater treatment has attracted much interest in recent periods, and various configurations have been investigated. The performance of a PMR using an iron doped titanium photo catalyst and Polysulfone-based polymeric membrane for municipal wastewater treatment was evaluated under natural and simulated solar light. Obtained results proved that solar driven PMRs can remove organic loading (COD) with high efficiencies and may represent a suitable alternative for the tertiary treatment step of municipal wastewater.

We investigate if anyone is being left behind in accessing safely managed drinking water (SM) in achieving the 2030 agenda. We use 23 countries grouped globally as critically insecure water (CIWC). The results indicate none of the CIWC had over 50% of the population accessing SM, N. America and Europe had highest percentages while Sub Saharan Africa had the least. People left behind are found in rural areas, in countries vulnerable to climate change because of poor governance, low-income, and women’s low education. Institutional quality, equity and equality should be improved in using resources critical to leaving no one behind.

Increased volume of untreated and inadequately treated municipal wastewater undermines the circular economy potential of wastewater resources, particularly in low-income region. This present study focused on and evaluated the performance of native microalgae-activated sludge (MAS) growth for tertiary treatment of anaerobically digested wastewater from an upflow anaerobic sludge blanket (UASB) in an outdoor lab-scale photobioreactors (2 L). Seven conditions with distinct inoculum concentrations were operated in batch mode in triplicate for 5-days hydraulic retention time (HRT) at 11.5:12.5 Photo-hours. MAS inoculum concentration influenced treatment outcome. The best performance was observed in MAS concentration 0.10/0.20 g L-1, with cell density count (2.03 x 107 cells mL-1), biomass productivity 0.125 g TSS L-1 d-1 and total phosphorus uptake (85.07%), total nitrogen uptake (66.14%). Logarithmic removal (Log-Re) of bacterial pathogens (water quality indicators) showed Log-Re ((3.4 for total coliforms (1.37E+02 CFU 100 mL-1) and 4.7 for Escherichia coli (0.00E+00 CFU 100 mL-1)). Results revealed optimum remediation performance and nutrients’ recovery potential with appropriate inoculum concentration, in admiration to advancing the science of circular economy.

With the ongoing amendment of the EU legislation on the treatment of urban wastewater, stricter requirements for the removal of pollutants are expected, which calls for the need for innovative wastewater treatment technologies. Biological systems are still the first choice. The survey of typical bioreactors applied in wastewater treatment is presented. Wastewater treatment objective, bio-chemical environment and microbial growth are selected as a main criterion for classification of these bioreactors. Hydraulic and kinetic aspects are considered, advantages and drawbacks of these bioreactors regarding the selection of appropriate type of the reactor as well as regarding operation of reactors are mentioned. The aim of this paper is to provide operators and designers with a brief overview of selected traditional and advanced processes, reactors, and technologies for nutrient removal from municipal wastewater. Another goal is to discuss the possibilities and limitations to comply with more strict effluent standards. From the evaluation of the published papers, it follows that the currently applied traditional methods of nutrients removal have the potential to convey also with the expected stricter limits.

This research focuses on monitoring the spatiotemporal changes of urban surface water in Dhaka City from 1990 to 2021, utilizing satellite imagery and the Google Earth Engine (GEE) platform. Surface water is essential for urban, environmental, and agricultural ecosystems, and its dynamics have significant implications for water resource planning and environmental management. The main objectives of this study are to assess the extent of urban surface water coverage over the last three decades and identify trends of water loss or gain in the study area. The study employs Landsat 5 TM and Landsat 8 OLI/TIRS imagery, integrating GEE with machine learning coding and WRI techniques to extract and analyze surface water data efficiently. Traditional remote sensing methods for dynamic monitoring are time-consuming and cumbersome, but GEE offers a user-friendly and accurate approach, providing easy access to satellite data and cloud-based processing. The results reveal a concerning trend in urban surface water coverage, indicating a significant reduction from 36.23 km² in 1990 to 5.83 km² in 2021, representing a loss of approximately 20 square kilometers or 45 percent of surface water over the last three decades. The decline is attributed to factors such as unplanned urban expansion, rapid real estate development, and increased industrial and economic activities in the study area. The developed algorithms utilizing GEE offer valuable insights into the maximum and minimum extent of surface water, enabling effective surface water planning and management. These findings contribute to sustainable water resource management and environmental preservation in Dhaka City.

The aim of this work was to investigate a new, simple one-pot combustion synthesis technique for creating sulphur-based CuS/ZnS p-n heterojunction nanocomposite photocatalysts. The study examined the photocatalytic activity and reusability of these nanocomposites in removing rhodamine B (RhB) dye under visible light irradiation. Various methods of characterisation were employed to determine the properties of the materials, including particle morphology, crystalline phases and bandgap energy. The intrinsic reaction parameters, such as catalyst loading, pH level of the solution, and initial pollutant concentration, were varied to establish the optimal photo-degradation conditions. The results showed that a binary CuS/ZnS catalyst with a 10 gL-1 loading, at pH 5, degraded 97% of 5 ppm RhB dye after 270 minutes of visible light irradiation. Addition-ally, this composite catalyst exhibited excellent chemical stability and reusability, achieving 83% RhB dye removal after five recycling runs. Scavenger tests identified the photogenerated holes (h+) and superoxide free radicals (•O2) as the primary reactive species responsible for degradation. This study provides valuable insight into the design of highly efficient nanomaterials for removing organopollutants in wastewater, and a possible reaction mechanism is proposed.