It is necessary to manage the power consumption and use fault-tolerance techniques to meet high reliability in Real-Time Embedded Systems, . Hence, in recent years, this is the main reason for providing an ideal approach to decrease power consumption through the worst-case behavior of instantaneous power management (peak-power management), while observing the Thermal Design Power (TDP). Although the multi-core chips in real-time embedded systems provide great opportunity for implementation of Two-phase Triple modular redundancy to meet high reliability, the energy overhead management of concurrently executing tasks is one of the challenges facing designers. In this article, we propose a scheme named Permanent Fault Aware, Two-Phase Peak-Power Management (PFA-TP3M), for scheduling real-time tasks in multi-core systems to eliminate peak power overlap from concurrent running tasks to maintain peak power consumption at the chip TDP. and through mapping different parts of each task on separate cores, prevents consecutive conflicts on cores, which have faced permanent faults to design the fault-tolerant system. Our simulation results show that our proposed scheme provides up to 700x fault tolerance increase (630x on average) compared to the state-of-the-art power management algorithm, an achievement costs up to 14%. (average 11%) increase the length of the task graph compared to it.

Chiroptical responses have been an essential tool over the last decades for chemical structural elucidation due to their exceptional sensitivity to geometry and intermolecular interactions. In recent times, there has been an increasing interest for the search of more efficient sensing by the rational design of tailored chiroptical systems. In this Review article, advances on chiroptical systems towards their implementation in sensing applications are summarized. Strategies to generate chiroptical responses are illustrated. Theoretical approaches to assist in the design of these systems are discussed. Development of efficient chiroptical reporters in different states of matter, essential for the implementation in sensing devises, is reviewed. In the last part, remarkable examples of chiroptical sensing applications are highlighted.

Specialized, reductionist, and linear approaches are applied in clinical research; they are based on linear logic and used towards therapeutic molecule-based targets. However, those approaches do not consider a systemic vision that describes the remote cause of the pathogenic activation. We propose new theoretical and practical methods for the next drug generation development. Self-organization, network structure, hierarchical organization, non-linearity, feedback circuits, reactions to information, and the view of drugs as information clarify the existing pharmacological methods. We suggest a perspective and hierarchical vision of the human organism based on six levels (mechanic and structural; metabolic; bodily dynamic; emotional, cognitive, spiritual). The therapy should restore the self-organization of every level using the “intelligent” modulation of the network responses. Multi-targeted drugs should act on the remote cause of the pathogenic cascade and be administered based on personal variability and networks. This approach may help the development of individualized, precise, and integrated medicine.

The coordination planning between land use and transportation system is an important premise of solving urban transportation problems and realizing land use integration. This study investigates the interactive and feedback relationship between land use and transportation system from the perspective of access management. By integrating the land use and traffic data from Las Vegas Metropolitan area with the system dynamics model, the causal relationship and causal loop diagrams (CLDs) are introduced to analyze the cause-and-effect relationship and quantitative relationship between the factors of the combined system of land use and transportation, and then sub-models partition and system simulation are performed. The systems dynamics model is established by analyzing the relationship between a series of access management techniques, traffic characteristics, and land use features. The results show that system dynamics model can be used as an effective alternative to model the symbiosis relationship of land use and transportation system for urban planning and construction.

Rangelands are a key resource present all over the world as it covers half of emerged lands. They are even more important in drylands, where they cover 48% of the total area. Intensification and the additional pressure added by climate change push these systems towards desertification. Over the last two decades, we have developed and applied System Dynamics (SD) models for the study of Mediterranean grasslands. In addition, we have developed procedures and analysis tools, such as global sensitivity analysis, stability analysis condition, or risk analysis, in order to detect the main drivers of these socio-ecological systems and provide indicators about their long-term sustainability. This paper reviews these works, their scientific background, and the most relevant conclusions, including purely technical and rangeland-related ones as well as our experience as systemic modelers in a world driven by field specialists.

Computer systems that operate in remote locations such as satellites, remote weather stations and autonomous robots are highly limited in the availability of energy for their operation. This work aims to employ artificial intelligence algorithms in energy management in order to obtain the maximum energy yield and the prediction of energy availability to the system. The work presents the main types of algorithms used in artificial intelligence and presents the creation of a prototype that will operate as a low power system powered by batteries and a small solar plate, the prototype will perform inferences on the LSTM neural network algorithm in order to predict the future availability of energy, consequently the management system will carry out the energy distribution in order to obtain the maximum operation of the prototype without total discharge of the batteries. So that the artificial intelligence system could be embedded in the prototype, the TensorFlow Lite framework was used, which allows the inference to be carried out in devices with low consumption and limited processing power.

Cells occupy a prominent place in the history of life on planet Earth. The central role of cellular organization is observed by the fact that “cellular life” is often used as a synonym for life itself. Thus, most characteristics used to define cells overlap with the ones used to define life. Notwithstanding, new scenarios about the origin of life are bringing alternative views to describe how cells may have evolved from the open biological systems named progenotes. Here, using a logical and conceptual analysis, we re-evaluate the characteristics used to infer a single origin for cells. We argue that some evidences used to support cell monophyly, such as the presence of elements from both the translation mechanism and the universality of the genetic code, actually indicate a unique origin for all “biological systems”, a term used to define not only cells, but also virus and progenotes. Besides, we present evidence that at least two biochemical pathways as important as (i) DNA replication and (ii) lipid biosynthesis may not homologous between Bacteria and Archaea. The identities observed between the proteins involved in those pathways along representatives of these two ancestral Domains are too low to indicate common genic ancestry. Altogether these facts can be seen as an indication that cellular organization has possibly evolved two or more times and that LUCA (the Last Universal Common Ancestor) might not have existed as a cellular entity. Thus, we aim to consider the possibility that different strategies acquired by biological systems to exist, such as viral, bacterial and archaeal were originated independently from the evolution of different progenote populations.

The solar heat pump system based on photovoltaic photothermal (PV/T) modules is a new technology that integrates photovoltaics and heat reutilization. It can improve the efficiency of photovoltaic conversion and recovery the remaining heat generated during the photoelectric conversion process, thereby improving the comprehensive efficiency of the whole system. Simulink software is a visual simulation tool, which has the advantages of strong applicability, clear simulation structure and calculation process. The design of its graphical programming greatly simplifies the user modeling process and allows for direct viewing of results, therefore improving the simulation efficiency. At present, there is little research on simulation of solar heat pump systems with PV/T modules based on Simulink software. In this paper, the mathematical models of each component contained in the PV/T solar heat pump system were established based on the system working principle, energy conservation equations and some empirical formulas, and then the operation of the system was simulated by the Simulink software. Due to the operation characteristic of PV/T modules is the key influencing factor for the whole system performance, the model and simulation process for PV/T modules were introduced in detail. The results showed that the surface temperature of PV/T modules under different operating conditions was significantly lower than that of ordinary photovoltaic panels, and the temperature change amplitude was lower. As results, the power generation and photovoltaic conversion efficiency were significantly improved.

The teaching and learning environment have changed significantly over the last decade with the integration of an increasing amount of information and communication technologies, especially in distance education due to global pandemics, total lockdowns, isolation, and quarantine periods. The number of numerous virtual and non-virtual tools involved in educational processes is growing day by day. In terms of technological innovations used in learning environments, many researchers and educators are trying their best to bring more creative ideas into the technology- based learning environments. Although higher educational institutions have greatly benefited from the growing number of hardware and software resources in the educational process, they have also faced some setbacks that have harmed the learning processes. These technologies have in turn complicated some of the processes in the learning atmosphere. Therefore, we take Spanish teaching course as an example to present the challenging smarter teaching and learning systems that higher educational institutions face today.

Estimation of the potential consequences from events occurring downstream of a dam are part of the risk assessment needed during the installation phase of a new dam. In case of specific Natural or Man Made ongoing or prospected events, it may be also important to carry out fast computations that can provide information on the areas at risk either because the original design analyses are not available or because the parameters needed are different. This study is aimed to develop a procedure that strongly facilitates the preparation of the input deck and the derivation of the output quantities to allow a fast analysis of a dam break event using a shallow water model, NAMI DANCE, as the analysis tool.

The recent development of the Internet has boosted the extension of online food services by enabling people to search, compare prices and conveniently access these services. Because, only with an online system, small and medium-sized economic actors can compete with established food company such as McD and KFC. Therefore, it is important to know consumer behavior patterns from online food ordering systems for developing marketing strategies. Exploring online consumer behavior provides a better understanding of consumer segmentation in food demand and thus helps to lay the foundation for developing an online marketing strategy for competitive advantage. The purpose of this study is to finding factors affecting attitude towards online food retailing. This study uses a quantitative approach by involving respondents who often use online food ordering systems (Go-Food) applications in Bandung. The results showed that hedonic motivation and price saving orientation had no significant effect on behavior intention toward OFD services by Go-Food, while time saving orientation, prior online purchase experience and convenience motivation had a significant effect on behavior intention toward OFD services.

In recent decades, particularly intense changes have occurred in Spanish urban areas. This is the result of demographic and urbanizing transformations that have led to a change in the city model. The predominance of compact forms has been replaced by the growing prominence of urban sprawl. Structures are now more extensive, characterized, in turn, by fragmentation and notable consumption of land in the peripheries. In medium-sized cities, the municipalities bordering the central cities have concentrated the processes of suburbanization and periurbanization. This paper addresses the process of change for 34 cities and their urban areas located in inland Spain. A proposal is made for the delimitation and characterization of urban areas, taking the municipality as the unit of analysis. At the methodological level, six variables are used, analyzed by means of multicriteria statistical techniques combined with the use of GIS tools. An Urban Transformation Index (ITU) has been developed that synthesizes urbanizing, demographic and socioeconomic dynamics. In the territorial area, the 20-minute isochrone is used as a reference. In the temporal domain, the period of analysis addresses the events of the first two decades of the twenty-first century.

The analysis of the land use dynamics of the Lac Télé Community Reserve (RCLT) using Landsat Thematic Mapper (TM) and (Enhance Thematic Mapper) ETM+ images highlight significant changes in the vegetation cover from 1980 to 2000 and 2018. Thus, the rate of forest area decreased by 21.41% for the entire LTCR in favor of savannahs which increased by 15.23%. The conversion of this forest area to savannah due to the practice of slash and burn agriculture facilitates the opening up of the forest area and contributes to greatly degrading the spawning grounds of fish species from the Likouala aux herbes river. For the mapping of fishing activity in general and the ecological characterization of the 151 identified spawning grounds in particular; the respective mean values of the physical and chemical water parameters; temperature (28.13°C), pH (4.23) and depth (3.34) did not vary significantly from one selected village to another between July and September 2019. The fish diversity unregistered during the study, in the 07 pilot villages would be due to the diversity of the microhabitats noted in the villages of the LTCR, especially from the villages; Botongo, Mossengue and Bouanela where the indices of ichthyological diversity were the highest.

This research article presents the integration of participatory modeling and system dynamics as a novel methodology for the consolidation of social dynamic models for the subsequent evaluation and prioritization of green projects in Colombian post-conflict communities. In the first instance, through participatory work carried out along with the community, it was possible to identify, evaluate and systematize citizen factors in relation to the problems and needs of the region. Second, based on the results obtained, to calibrate a simulation model based on system dynamics that facilitates decision making with regard to the evaluation of green projects. The proposed methodology leads to the conclusion that, with the participation of the community and with a model based on the dynamics of variables such as supply and demand for natural resources of water and land, it is possible to warn decision makers about the variables that can lead to the maximization of investments and thus prioritize and select the most appropriate environmental, social or economic initiatives, that certainly meet the needs or expectations of the involved community. In the future, the model could be used to facilitate the management, administration and control of water and land resources by creating alerts called reserve margins.

This review underscores the critical significance of incorporating network perspectives in epidemiology. Classic compartmental models (CM) employed to describe epidemic spreading often fail to capture the intricacies of real disease dynamics. Rooted in the mean-field assumption, CM models oversimplify by assuming that every individual has the potential to "infect" any other, neglecting the inherent complexity of underlying network structures. Given that social interactions follow a networked pattern with specific links between individuals based on social behaviors, the amalgamation of classic CM and network science in epidemiology becomes essential for a more authentic portrayal of epidemic spreading. This review delves into noteworthy research studies that, from various perspectives, elucidate how the synergy between networks and CM can enhance the accuracy of epidemic descriptions. In conclusion, we explore research prospects aimed at further elevating the integration of networks within the realm of epidemiology, recognizing its pivotal role in refining our understanding of disease dynamics.

The idea that the Earth system self-regulates in a habitable state was proposed in the 1970s by James Lovelock, who conjectured that life plays a self-regulatory role on a planetary-level scale. A formal approach to such hypothesis was presented afterwards under a toy model known as the Daisyworld. The model showed how such life-geosphere homeostasis was an emergent property of the system, where two species with different properties adjusted their populations to the changing external environment. So far, this ideal world exists only as a mathematical or computational construct, but it would be desirable to have a real, biological implementation of Lovelock's picture beyond our one Biosphere. Inspired in the exploration of synthetic ecosystems using genetic engineering and recent cell factory designs, here we propose such a living, microbial Daisyworld. This is based on a synthetic microbial ecosystem using pH as the external, abiotic control parameter. Several case studies are considering, including two, three and multiple species assemblies. Despite that oscillatory dynamics and chaos emerge in the latter case, it is shown that global regulation is also achieved in most cases as species diversity increases. The alternative implementations and their implications of this model in other synthetic biology scenarios, including ecosystem engineering, are outlined.

Currently 7.6% of the U.S. young adults aged 18-24 years old currently use e-cigarettes. This study piloted three methods of ENDS cessation by measuring cessation rates, motivational techniques that contributed to cessation success, and participants’ changes after decreasing vape use. Participants were randomized into three study arms [nicotine replacement therapy (NRT) + behavioral support, vape-taper + behavioral support, self-guided] in a 1:1:1 ratio. All participants were invited to attend 9 in-person or phone appointments over the 6 month study period. At 12 weeks, 3 of 7 (42.9%) participants in the NRT + behavioral support arm, 6 of 8 (75%) vape-taper + behavioral support arm, and 7 of 9 (77.8%) self-guided arm self-reported being vape- and nicotine-free. At 6 months, 3 of 7 (42.9%) participants in the NRT + behavioral support arm, 6 of 8 (75%) vape-taper + behavioral support arm, 4 of 9 (44.4%) self-guided arm self-reported being vape- and nicotine-free. A challenge to quitting and remain quit is social pressures, but participants identified self-control and establishing new habits to be the best methods to overcome the desire to vape. Participants who received behavioral support and a vape-taper plan from pharmacists were more likely to be vape- and nicotine-free at 6 months.

Automatic ice charting can not be achieved using only SAR modalities. It is fundamental to combine information from other remote sensors with different characteristics for more reliable sea ice characterization. In this paper, we employ principal feature analysis (PFA) to select significant information from multimodal remote sensing data. PFA is a simple yet very effective approach that can be applied to several types of data without loss of physical interpretability. Considering that different homogeneous regions require different types of information, we perform the selection patch-wise. Accordingly, by exploiting the spatial information, we increase the robustness and accuracy of PFA.

The complex systems that require safety are the Safety Critical Systems. Maintaining these systems is a big challenge. Now a days, safety is a very critical requirement for the latest systems. Safety critical systems must be safe. Different approaches to ensure quality and safety in safety critical systems has been discussed in this paper. A comparison is also conducted between these various approaches. Safety critical systems must remain more influential in future.

This paper focuses on the new users cold-start issue in the context of recommender systems. New users who do not receive pertinent recommendations may abandon the system. In order to cope with this issue, we use active learning techniques. These methods engage the new users to interact with the system by presenting them with a questionnaire that aim to understand their preferences to the related items. Example of questions may include "do you like this book?" and the users answer,"yes", "no", "I have not read it (unknown)", will reflect the degree of interest for the item by the users. As a consequence, the system can learn the users' preferences from these answers. The goal of active learning is to correctly choose the questions (items) for users. Thus it is necessary to personalize the questionnaires to retrieve the maximum information by avoiding "unknown" answers. In this paper, we propose an active learning technique that exploits past users' interests and past users' predictions in order to identify the best questions to ask.

This article is a theoretical contribution to mental model research, which currently has different threads. Whereas some researchers focus on the perceived causal structure, others also include decision policies and decisions. We focus on the link between recognized causal structure (“mental models of dynamic systems”) and policies, proposing Johnson-Laird’s theory of mental models as the link. The resulting framework hypothesizes two types of systematic mental model errors: (1) misrepresentation of the system’s structure and (2) failure to deploy relevant mental models of possibilities. Examination of three experiments through this lens reveals errors of both types. Therefore, we propose that the cognitive theory of mental models opens a path to better understand how people construct their decision policies and develop interventions to reduce such mental model errors. The article closes by raising several questions for empirical studies of the reasoning process leading from mental models of dynamic systems to decision policies.

Rapid reduction in the $/Wp prices of photovoltaic (solar PV) energy has been proceeded recently, resulting in near exponential deployments with an annual capacity of 200 GW expected by 2020. Achieving high efficiency is necessary for many solar manufacturers to break even. In addition, new innovative installation methods are emerging to complement the improvement of system performance. The floating PV (FPV) solar market space has emerged over the past decade as a method for utilizing the cool ambient environment of the FPV system near the water surface to boost the power output performance of the PV module and ultimately the yield of the PV system. PV module temperature, which is the most critical factor affecting efficiency, ultimately governs the effective performance of solar cells, module, and all semiconductor materials in general. We propose the first ever electrical efficiency equations (${\eta }_{c,FP{V}_1}$ and ${\eta }_{c,FP{V}_2}$) for an FPV module installed on water based on two new predictions of FPV temperature operation models (T_m1 and T_m2), whose coefficients are derived from FPV site data with MATLAB. The theoretical prediction of module temperature shows respective errors of 2% and 4% when compared to the FPVM measured data.

This paper presents a model for determining the availability of continuous systems at open pits using the neuro-fuzzy system. The concept of availability is divided into partial indicators (synthetic indicators and sub-indicators). The presented model in relation to already existing models for determining availability uses a combination of the advantages of artificial neural networks and fuzzy logic. The case study was done for the I ECC (bucket wheel excavator – conveyors – crushing plant) system of the open pit Drmno, Kostolac. In this paper, in addition to the ANFIS model for determining the availability of continuous systems, a simulation model was developed. The obtained results of the ANFIS model were verified with the help of a simulation model that uses certain assumptions about the distribution of failures. This paper was created as a result of several years of field and theoretical research into the availability of continuous sys-tems in open-pit mines, and completes a cycle that consists of several published articles on the subject of modeling the behavior of these systems in real time using a time picture of the state, expert assessment, simulation and AI models, respecting the multidisciplinarity of the problem (mining-technological, mechanical, information-technological aspects).

The UK aviation industry is committed to achieving net zero emissions by 2050 through sustainable measures, and one of the key aspects of this effort is the implementation of Unmanned Traffic Management (UTM) systems. These UTM systems play a crucial role in enabling the safe and efficient integration of unmanned aerial vehicles (UAVs) into the airspace. As part of the Airspace of the Future (AoF) project, the development and implementation of UTM services have been prioritized. The paper aims to create an environment where routine drone services can operate safely and effectively. To facilitate this, a digital twin of the National Beyond Visual Line of Sight Experimentation Corridor has been created. This digital twin serves as a virtual replica of the corridor and allows for the synthetic testing of unmanned traffic management concepts. The implementation of the digital twin involves both simulated and hybrid flights with real drones. Simulated flights allow for the testing and refinement of UTM services in a controlled environment. Hybrid flights, on the other hand, involve the integration of real drones into the airspace to assess their performance and compatibility with the UTM systems. By leveraging the capabilities of UTM systems and utilizing the digital twin for testing, the AoF project aims to advance the development of safer and more efficient drone operations. Experimentation Corridor has been developed to simulate and test concepts related to managing unmanned traffic. The paper provides a detailed account of the implementation of the digital twin for the AoF project, including simulated and hybrid flights involving real drones.

Conservation Agriculture (CA) and the System of Rice Intensification (SRI) are both agroecologically-oriented production systems that support more productive, sustainable, and resource-conserving farming, with synergies arising from their respective assemblages of reinforcing agronomic methods. Application of CA principles enhances the growth, yield, and performance of the crops grown under the cropping system as well as the health and resilience of the whole ecosystem. SRI practices create more favorable conditions for the development of crop plants below- and above-ground, conditions that can be enhanced by CA management. SRI practices such as reduced plant density m-2 can elicit better phenotypic expression of the genetic potentials of crops grown with CA.. For these two agronomic systems to converge at field level, some of their respective practices for plant, soil, water, and nutrient management need to be modified or aligned. One such adaptation is to practice SRI in CA systems on permanent, no-till, mulch covered raised beds, with rainfall or irrigation water in the furrows between the beds furnishing and controlling water; and providing weed suppression and improved nutrient recycling. SRI rice cropping can benefit from the CA practices of no-tillage, soil mulch cover, and diversified cropping, both in paddies and on raised beds. Several examples have shown that this convergence of cropping systems is feasible for smallholding farmers as well as for larger-scale producers, and also that SRI practices within a CA system are amenable to considerable mechanization. This review article examines the compatibility between CA and SRI, considering examples of their being utilized in complementary ways. Further research and experimentation are needed to identify and assess appropriate practices for capitalizing upon their synergies.

ABSTRACT: Aims: This study aimed to explore the impacts of neighborhood-level socioeconomic contexts (e.g., income, education) on the therapeutic and preventative dental quality outcome of children aged 3 to 15 years. Materials and Methods Anonymized billing data of 842 patients reporting to a university Children’s Dental over three years met the inclusion criteria. Their access to care (OEV-CH-A), topical fluoride application (TFL-CH-A) and dental treatment burden (TRT-CH-A) were determined by dental quality alliance (DQA) criteria. The three oral health variables were aggregated at a neighborhood-level and analyzed with census data provided by Statistics Canada within a GIS framework. The forward sortation area (FSA) was chosen as a neighborhood spatial unit and regression models were run both the individual and neighborhood level. Results: The individual-level regression models showed significant negative associations between OEV-CH-A (p=0.027) and TFL-CH-A (p=0.001) and the cost of dental care. There was a significant negative association between TRT-CH-A and median household income. Neighborhood-level Ordinary Least Squares (OLS) linear regression models show negative associations of all three dental health variables (OEV-CH-A, TFL-CH-A, TRT-CH-A) with median household income and the number of households without a college degree. Conclusion: GIS and spatial quantitative approaches may be an effective tool to explore the impacts of socioeconomic variables on oral health outcomes.

The increasing environmental and human health concerns associated with medical waste have led to the development of environmental biotechnology as a means of mitigating its negative effects. This review paper discusses the various types of medical waste generated in healthcare facilities, as well as the potential environmental and health impacts of improper handling and disposal. It also provides an overview of the different environmental biotechnologies that have been developed to treat medical waste, including bioreactor systems, microbial treatment, and composting. The benefits and drawbacks of these technologies are also discussed. Bioremediation is a promising environmental biotechnology that can be used to treat medical waste contaminated with hazardous chemicals. Case studies from around the world demonstrate the successful application of environmental biotechnologies to medical waste management. These case studies highlight the challenges encountered, the methods used, and the results obtained. The findings of this review paper highlight the need for a comprehensive strategy for managing medical waste that includes environmental biotechnologies. Further research and development are needed to improve the effectiveness, efficiency, and sustainability of medical waste management.

Hotel water systems colonized with Legionella spp. have been the source of travel-associated Legionnaires’ disease and cases, clusters or outbreaks continue to be reported worldwide each year. A total of 132 hotels linked with travel-associated Legionnaires’ disease, as reported through the European Legionnaires’ Disease Surveillance Network, were inspected and tested for Legionella spp. during 2000–2019 by the public health authorities of the island of Crete (Greece). A total of 3,311 samples were collected: 1,885 (56.93%) from cold water supply systems, 1,387 (41.89%) from hot water supply systems, 37 (1.12%) were swab samples and two (0.06%) were soil. Of those, 685 (20.69%), were collected from 83 (62.89%) hotels, testing positive (≥ 50CFU/L) for Legionella pneumophila) serogroups 1-10, 12-14 and non-pneumophila species (L. anisa, L. erythra, L. tusconensis, L. taurinensis, L. birminghamensis, L. rubrilucens, L. londiniesis, L. oakridgensis, L. santicrusis, L. brunensis, L. maceacherii). The most frequently isolated L. pneumophila serogroups were 1 (27.92%) and 3 (17.08%). Significantly higher isolation rates were obtained from hot water supply systems (25.96%) versus cold water systems (16.98%) and swab samples (13.51%). A Relative Risk (R.R.) > 1 (p < 0.0001) was calculated for hot water temperature <55 °C (R.R.: 4.43), chlorine concentrations <0.2 mg/L (R.R.: 2.69), star rating <4 (R.R.: 1.73) and absence of Water Safety Plan implementation (R.R.: 1.57).

Quantum computers are invaluable tools to explore the properties of complex quantum systems. We show that dynamical localization of the quantum sawtooth map, a highly sensitive quantum coherent phenomenon, can be simulated on actual, small-scale quantum processors. Our results demonstrate that quantum computing of dynamical localization may become a convenient tool for evaluating advances in quantum hardware performances.

Fifty-eight Karacabey Merino lambs were used to evaluate the effects of feeding system (triticale pasture, oat pasture, or stall fed), birth type (single or multiple), gender (male or female) and birth year (2016 or 2017) on various carcass and meat quality characteristics. Stall lambs had higher conformation (CS) and fatness scores (FS), meat L* and h* values than both pasture groups, possibly as a result of higher fat content, while oat pasture lambs had the most tender meat. Single lambs had higher CS, FS and Longissimus thoracis muscle section area, while females had higher subcutaneous and non-carcass fat depositions, over their counterparts. Both single born lambs and 2016 born lambs had a higher meat a* and C* values than their counterparts. In conclusion, a pasture-based feeding system is thought to be more suitable for Karacabey Merino than stall feeding system, for those who prefer leaner meat and/or meat products. However, it should not be ignored that stall fed lambs showed a better fattening performance in terms of conformation and fatness, in the same period.

The contractual relationship between the processing firm and the broiler smallholder presents incessant conflicts of interest and inequality due to technical and economic discrepancies, leading to an undervaluation of the producers' remuneration. This study aims to deepen the discussions in searching for a more balanced monetary exchange between processing firms and broiler smallholders based on scientific aspects. For this, the Emergy theory and its concepts were used in considering a representative broiler production system at Concórdia, Santa Catarina, Brazil. This study suggests the inclusion of cultural information in the Emergy-based model calculation. For the broiler smallholder, cultural information showed the highest Emergy contribution (62.95%; transformity = 1.73 ×10^8). However, only considering cultural information was not sufficient to increase the sustainability of the broiler production system. The results highlight an imbalance of the monetary exchange between agroindustry and broiler smallholder payment for both the economic and Emergy-based payment. Both estimated payments were higher than the practiced payment value (0.24 USD/broiler as well as 0.32 USD/broiler and 1.62 EmUSD/broiler, respectively). Thus, evaluating the “(eco)cost” in Emergy-based accounting recognizes that production depends not only on tangible physical resources but also on knowledge, skills and information (“iceberg of value” thinking). Policy and decision makers must, therefore consider the promotion of public policies that subside initiatives, including social and environmental welfare programmes.

Using the unique combination of atomically resolved atom probe tomography (APT) and volume averaged neutron (resonance) spin echo (NRSE and NSE) experiments, the influence of nano-scaled clusters on the spin relaxation in spin glasses was studied. For this purpose, the phase transition from the paramagnetic phase to the spin glass phase in a Fe-Cr spin glass with a composition of Fe_17.8Cr_82.2 was studied in detail by means of NRSE. The microstructure was characterised by APT measurements, which show local concentration fluctuations of Fe and Cr on a length scale of 2 to 5 nm, which lead i) to the coexistence of ferro- and anti-ferromagnetic clusters and ii) a change of the magnetic properties of the whole sample, even in the spin glass phase, where spins are supposed to be randomly frozen. We show that a generalized spin glass relaxation function, which was successfully used to describe the phase transition in diluted spin glasses, can also be used for fitting the spin dynamics in spin glasses with significant concentration fluctuations.

Security has become a critical issue in today’s highly distributed and networked systems. Network intrusion detection systems (NIDSs), especially signature-based NIDSs, are being widely deployed in a distributed network environment with the purpose of defending against a variety of network attacks. Most of the commercially available NIDSs are software based and rely on pattern matching to extract the threat from network traffic. The increase in network speed and traffic may make existing algorithms to become a performance bottleneck. Therefore it is very necessary to develop faster and more efficient pattern matching algorithm in order to overcome the troubles on performance of NIDSs. Therefore, we propose a multi fusion pattern matching algorithm for Network Intrusion Detection Systems. The results obtained in percentages from the proposed fusion algorithm given better values in terms processing time in milliseconds than the existing algorithms when data English text are applied to evaluate the fusion performances.

Accurate detection and state analysis of traffic flows are essential for effectively reconstructing traffic flows and reducing the risk of severe injury and fatality. For this reason, several studies on resolving traffic problems have proposed the use of crowdsourcing, in which drivers provide real-time traffic information using mobile devices, to monitor traffic conditions. Using data collected via crowdsourcing for traffic event detection has advantages in terms of improved accuracy and reduced time cost in collecting relevant data. In this paper, we propose a technique that employs crowdsourcing to collect traffic-related data and uses these data to detect events that influence traffic. The proposed technique uses various machine-learning methods to more accurately identify events and find accurate location information. Therefore, it is able to resolve problems typically encountered with conventionally provided location information, such as broadly defined locations or inaccurate location information. The proposed technique has advantages in terms of reducing time and cost while increasing accuracy. Its validity and effectiveness were also demonstrated through various performance evaluations.

The world is facing a great technological transformation towards full autonomous vehicles, where optimists predict that by 2030, autonomous vehicles will be sufficiently reliable, affordable and common to displace most human driving. To cope with these trends, reliable perception systems must enable vehicles to hear and see all the surroundings, being light detection and ranging (LiDAR) sensors a key instrument for recreating a 3D visualization of the world in real time. However, perception systems must rely in accurate measurements of the environment. Thus, sensors must be calibrated and benchmarked before being placed on the market or assembled in a car. This article presents an Evaluation and Testing Platform for Automotive LiDAR sensors with the main goal of testing not only commercially available sensors, but also sensor prototypes currently under development in Bosch Automotive Electronics division. The testing system can benchmark any LiDAR sensor under different conditions, recreating the expected driving environment to which such devices are normally subjected. To characterize and validate the sensor under test, the platform evaluates several parameters such as the field of view (FoV), angular resolution, sensor’s range, etc. This project results from a partnership between the University of Minho and Bosch Car Multimedia Portugal, S.A.

Anticipating and planning for the urgent response to large-scale disasters is critical to increase the probability of survival in these events. These incidents present various challenges that complicate the response, such as unfavorable weather conditions, difficulties in accessing affected areas, and the geographical spread of the victims. Furthermore, local socioeconomic factors such as insufficient prevention education, limited disaster assets, and inadequate coordination between public and private emergency services may complicate these situations. In large-scale emergencies, multiple hotspots are usually observed, which requires efforts to coordinate the strategic allocation of human and material resources in different geographical areas. Therefore, the precise management of these resources based on the specific needs of each area becomes fundamental. To address these complexities, this paper proposes a methodology that models these scenarios as an optimization problem, focusing on the location and allocation of resources in mass casualty incidents. The proposed case study is Mexico City in a post-earthquake scenario, using voluntary geographic information, open government data, and historical data from the September 19, 2017 earthquake. Additionally, it is assumed that the resources that require optimal location and allocation are ambulances, which focus on medical issues that affect the survival of victims. The designed solution involves the use of a metaheuristic optimization technique, along with a parameter tuning technique, to find configurations that perform at different instances of the problem, i.e., different hypothetical scenarios that can be used as a reference for future possible situations. Finally, the objective is to present the different solutions graphically, accompanied by relevant information to facilitate the decision-making process of the authorities responsible for the practical implementation of these solutions.

To assure the opacity, an optimal problem is to retain the occurring events sequences as many as possible. Contrary to such problem, the other optimal problem is to preserve the minimal occurring events sequences. In the paper, based on the choosing cost, an optimal opacity-enforcing model is presented to minimize the sum of discount choosing cost, which is not only to preserve the opacity, but also to retain the secret to the maximum. To solve the model, two scenarios on opacity are considered. For the two scenarios, some algorithms are presented to achieve the optimal solution for the model by using the method of dynamic programming. And then, the solutions produced by the algorithms are proved correctly by theoretical proof. Finally, some illustrations for the algorithms are given.

This paper addresses the critical issue of trust in Artificial Intelligence systems, especially when users might find it challenging to comprehend the internal decision-making processes of such systems. A relevant topic of research in this respect is Theory of Mind, which involves attempting to understand these systems as if they possessed beliefs, desires, and intentions. We focus on the latter: intentions, and we examine how producing explanations based on them can improve \emph{understandability} while allowing for a better interpretation of how they align with human values. We also review some existing methods for identifying intentions in AI systems and we conclude with a discussion on possible future directions in this line of research.

A review of desiccant dehumidification technologies for improving air-quality has been presented, especially focusing on alternatives for air conditioning systems for minimizing the Sick Building Syndrome. The principles and types of desiccant wheels, as well as the existing selection software for these types of equipment, were reviewed and comparatively evaluated. The study focuses on the Brazilian context, therefore, information about air condition systems and laws of this country were evaluated. Possible applications of desiccant wheels are also analyzed, such as their integration into cooling cycles and the sensible heat wheel. Finally, several commercial desiccant wheel selection software were evaluated, which are useful in many situations. Nevertheless, it was evidenced that the available softwares are not capable of performing an operation analysis for only a specific period. Therefore, it is essential to create computational tools to select desiccant wheels, considering the data from the different Brazilian regions for a year.

Prostate cancer (PCa) is one of the most prevalent cancers among men in India. Although studies on PCa have dealt with the genetics, genomics, and the environmental influence in causality of PCa, not many studies employing the next generation sequencing (NGS) approaches of PCa have been carried out. In our previous study, we have identified some causal genes and mutations specific to Indian PCa using Whole-Exome Sequencing (WES). In the recent past, with the help of different cancer consortiums such as The Cancer Genome Atlas (TCGA), International Cancer Genome Consortium (ICGC), along with differentially expressed genes (DEGs), many cancer-associated novel non-coding RNAs have been identified as biomarkers. In this work, we attempt to identify DEGs as well as long non-coding RNAs (lncRNAs) associated with signature pathways from an Indian PCa cohort using RNA-sequencing (RNA-seq) approach. From a cohort of 60, we screened 6 patients who underwent prostatectomy; we performed a whole transcriptome shotgun sequencing (WTSS)/RNA-sequencing to decipher the DEGs. We further normalized the read counts using fragments per kilobase of transcript per million mapped reads (FPKM) and analyzed the DEGs using a cohort of downstream regulatory tools, viz. GeneMANIA Stringdb, Cytoscape-Cytohubba, cbioportal to map the inherent signatures associated with PCa. By comparing the RNA-seq data obtained from the pairs of normal and PCa tissue samples using our benchmarked in-house cuffdiff pipeline, we observed some important genes specific to PCa such as STEAP2, APP, PMEPA1, PABPC1, NFE2L2, HN1L and some other important genes known to be involved in different cancer pathways such as, COL6A1, DOK5, STX6, BCAS1, BACE1, BACE2, LMOD1, SNX9, CTNND1 etc. We also identified a few novel lncRNAs such as LINC01440, SOX2OT, ENSG00000232855, and ENST00000647843.1 that need to be characterized further. Deregulation of SOX2OT is observed in various tumors, including lung cancer, gastric cancer, esophageal cancer, breast cancer, hepatocellular carcinoma, ovarian cancer, pancreatic, laryngeal squamous cell carcinoma, osteosarcoma, nasopharyngeal carcinoma, and glioblastoma. It would be interesting to characterize its function in PCa as well. In comparison with publicly available datasets, we have identified characteristic DEGs and novel lncRNAs implicated in signature PCa pathways in an Indian PCa cohort which have perhaps not been reported. As a pilot study, this has set a precedent for us to validate further experimentally, and we firmly believe this will pave a way towards discovery of biomarkers and development of novel therapies.

Healthy brain functioning depends on balancing stable integration between brain areas for effective coordinated functioning, with bursts of desynchronisation to allow subsystems to reconfigure and express functional specialisation. Metastability, a concept originated in statistical physics and dynamical systems theory, has been proposed as a key signature that characterises this balance. Building on this principle, the neuroscience literature has employed markers of metastability to investigate various aspects of brain function including cognitive performance, healthy ageing, meditation, sleep, responses to pharmacological challenges, and to characterise psychiatric conditions or disorders of consciousness. However, this body of work often uses the notion of metastability heuristically, and sometimes inaccurately, making it hard for the uninitiated to navigate the vast literature, interpret findings, and foster further development of theoretical and experimental methodologies. In this paper we provide a comprehensive review of metastability and its applications in neuroscience, covering its scientific and historical foundations and the practical estimators used to estimate it in empirical data. We also provide a critical analysis of recent theoretical developments, clarifying common misconceptions and paving the road for future developments.

A smartphone plummeted from a stratospheric height of 36 km (~119,000 feet), providing a complete record of its rapid descent and abrupt deceleration when it hit the ground. The smartphone was configured to collect internal sensor data at high rates. We discuss the state-of-the-art of smartphone environmental and sensing capabilities at the closing of year 2020 and present a flexible mobile sensor data model. The associated open-source application programing interface (API) and python software development kit (SDK) used in this work is transportable to any hardware platform and operating system.

Abstract Background: The highest incidence rate of covid-19 in Iran was reported from Shahroud County. This study was conducted by geographic information systems (GIS) to determine the geographical distribution of Covid-19 in 60 days. Study design: A cross-sectional study Methods: This study was conducted in counties covered by Shahroud University of Medical Sciences, namely Shahroud and Mayami, from February 20, 2020 to April 18, 2020. The GIS can better show the spread of epidemics. This software indicates geographical distribution of disease spread and is very helpful in controlling the epidemics. Therefore, maps of spatial distribution and risk of infection to COVID-19 were prepared in different regions of Shahroud county using Arc-GIS software to better implement health policies. Results: During this sixty-day period, 529 confirmed cases were detected, of which 51% were men and the average age was 55 years. The maps showed high-risk to risk-free regions. Shahroud and Bastam cities were known as the coronavirus hot spots. The eastern region of Shahroud has the highest number of cases but some high risk areas are spread throughout the Shahroud city due to high infectivity of virus. Risk-based time maps indicated a reduction in the risk of infection at the end of the research period due to some mitigation and suppression strategies. Conclusions: Shahroud and Bastam are the most dangerous cities that, the number of patients and dissemination has decreased over time because of tracking definite patients and people in contact with them and implementation of preventive care.

Weight thresholding (WT) is a method intended to decrease the number of links within weighted networks that may otherwise be excessively dense for network science applications. WT aims to remove links to simplify the networks by holding most of the features of the original network. Here, we test the robustness and the efficacy of the node attack strategies on real-world networks subjected to WT that remove links of higher weight (strong links). We measure the network robustness along node removal with the largest connected component (LCC). We find that the real-world networks under study are generally stable in terms of robustness when subjected to WT. Nonetheless, WT by strong link removal changes the efficacy of the attack strategies and the rank of node centralities. Also, WT by strong link removal may trigger a greater change in node centrality rank than WT by removing weak links. Network science research finding important/influential nodes in the network has to consider that simplifying the network with WT methodologies may change the node centrality.

This theoretical article provides a brief description of the model of living systems' functioning by defining them as resource flows patterns. It reviews the living systems growth limitation between their development cycles by the Fibonacci sequence. Besides, there are presented systems resource base criteria, necessary for accumulating the resources and their investment. The article also considers the conditions for the formation of various systems strategies. Then we reviewed the principles of elemental analysis of information by a person as a living system according to the considered model. The study also shows the possibility of forming priorities in analyzing information for 16 combinations as maximum. At that, it remains crucial to divide a human's information analysis between the two hemispheres of the brain. The described combinations of priorities in a person's information analysis are compared with the existing differential personality models, such as the big five personality traits, the Myers-Briggs type indicator, temperaments model and Honey and Mumford Learning styles.

: The cyber-physical gap (CPG) is the difference between the 'real' state of the world and the way the system perceives it. This discrepancy often stems from the limitations of sensing and data collection technologies and capabilities, and is an inevitable issue in any cyber-physical system (CPS). Ignoring or misrepresenting such limitations during system modeling, specification, design, and analysis can potentially result in systemic misconceptions, disrupted functionality and performance, system failure, severe damage, and potential detrimental impacts on the system and its environment. We propose CPG-Aware Modeling & Engineering (CPGAME), a conceptual model-based approach for capturing, explaining, and mitigating the CPG, on top of and in sync with the conventional system model, and as an inherent systems engineering activity. This approach enhances the systems engineer’s ability to cope with CPGs, mitigate them by design, and prevent erroneous decisions, actions, and hazardous implications. CPGAME is a generic, conceptual approach, specified and demonstrated with Object Process Methodology (OPM). OPM is a holistic conceptual modeling paradigm for multidisciplinary, complex, dynamic systems, which is also ISO-19450. We analyze the 1979 Three Miles Island 2 nuclear accident as a prime example of the disastrous consequences of unmitigated CPGs in complex systems.

Here, we propose a prescriptive simulation model of a process operator’s decision-making assisted by artificial intelligence (AI) algorithm in a technical system control loop. We analyze situations fraught with a catastrophic threat that may cause unacceptable damage. Operators’ decision-making is interpreted in terms of a subjectively admissible probability of disaster and subjectively necessary reliability of its assessment. We distinguish four extreme decision-making strategies corresponding to different ratios between the above variables. An experiment simulating a process facility, an AI algorithm and operator's decision-making strategy was held. It showed that depending on the properties of a controlled process (the speed of hazard onset) and the AI algorithm characteristics (Type I and II error rate), each of such strategies or some intermediate strategy may prove to be more beneficial than others. The same approach is applicable to the identification and analysis of sustainability of strategies applied in real-life operating conditions, as well as to the development of a computer simulator to train operators to control hazardous technological processes using AI-generated advice.

Reinvigorated public interest in human space exploration has led to the need to address the science and engineering challenges described by NASA's Space Technology Grand Challenges (STGCs) for expanding the human presence in space. Here we define Space Bioprocess Engineering (SBE) as a multi-disciplinary approach to design, realize, and manage a biologically-driven space mission as it relates to addressing the STGCs for advancing technologies to support the nutritional, medical, and incidental material requirements that will sustain astronauts against the harsh conditions of interplanetary transit and habitation offworld. SBE combines synthetic biology and bioprocess engineering under extreme constraints to enable and sustain a biological presence in space. Here we argue that SBE is a critical strategic area enabling long-term human space exploration; specify the metrics and methods that guide SBE technology life-cycle and development; map an approach by which SBE technologies are matured on offworld testing platforms; and suggest a means to train the next generation spacefaring workforce on the SBE advantages and capabilities. In doing so, we outline aspects of the upcoming technical and policy hurdles to support space biomanufacturing and biotechnology. We outline a perspective marriage between space-based performance metrics and the synthetic biology Design-Build-Test-Learn cycle as they relate to advancing the readiness of SBE technologies. We call for a concerted effort to ensure the timely development of SBE to support long-term crewed missions using mission plans that are currently on the horizon.

The space shuttle, a revolutionary spacecraft that has played a significant role in human space exploration, was composed of various advanced materials that were carefully selected to meet the extreme demands of spaceflight. This review paper provides a comprehensive examination of the materials historically employed in the construction of space shuttles and explores the latest trends shaping the field. The evolution of space shuttle materials is traced from the inception of the space program to contemporary missions, highlighting key milestones, challenges, and breakthroughs. Emphasis is placed on the critical role that materials play in the overall performance, safety, and sustainability of space shuttles. The paper begins by elucidating the diverse requirements that materials must fulfill in the harsh and complex environment of space, encompassing extreme temperatures, radiation exposure, and mechanical stresses. A detailed analysis of the materials utilized in the fabrication of various shuttle components, such as thermal protection systems, structural elements, and propulsion systems, is presented. Special attention is given to the challenges posed by re-entry and the strategies employed to mitigate heat-related issues. Furthermore, the review explores recent innovations and emerging materials that are reshaping the landscape of space shuttle design. Advancements in nanotechnology, composite materials, and additive manufacturing are discussed in the context of their potential applications for enhancing shuttle performance and reducing mission costs. The paper also addresses the importance of sustainability in space exploration, exploring materials with lower environmental impact and improved recyclability. The review concludes with a forward-looking perspective on the future of materials, considering ongoing research, development, and the potential incorporation of cutting-edge technologies. Insights are provided into how the evolving landscape of materials science may influence the design and manufacturing processes of the next generation of space vehicles. This paper provides an overview of the materials used in the construction of the space shuttle, including their properties, applications, and challenges. The materials used in the space shuttle are critical in ensuring the safety, performance, and longevity of the spacecraft, and understanding their characteristics and performance in space is crucial for the advancement of aerospace engineering.

This paper presents a novel approach to power management techniques in energy storage system (ESS) interoperability with the energy power system (EPS) by inserting a SCADA controlled directional protection relay for improving the mode switching sequence. According with latest European standards, all necessary measures for re-synchronization and reconnection for health work of the system must be taken. The proposed approach intends to improve the “interface” between storage systems and electric power grid by using a directional relay which provides interoperability improvement by automatic recognizing and differentiating the switching sequence of the mode of operation from the fault mode. Simulated results from a small scale electrical generating system are provided. The results demonstrate that the proposed power management solution is technically ideal to achieve high quality energy while retaining the stability of the power grid network. The interoperability of PHS systems integrated with the electric power grid usually leads to perturbations in terms of frequency of the generated voltage, and for improving it we designed an automatic treating and re-connecting software module. This work regards the importance of producing electricity from green and renewable energy sources, while retaining the stability and reliability of the power grid. ESS systems are widely used to help balancing of intermittent forms of load demand on the electrical power grid at specific key moments. In this article, the pumped hydro storage (PHS) technologies are proposed as an economical way to utilize smoothly the off-peak energy or surplus energy, by pumping water to a reservoir at a higher level. During peak load periods, the stored water is discharged through the reversible pump-turbine to generate electricity to meet the peak demand controlled by designed SCADA application.

Complex systems exhibit critical thresholds at which they transition among alternative phases. Complex systems theory has been applied to analyze disease progression, distinguishing three stages along progression: (i) a normal non-infected state, (ii) a pre-disease state in which the host is infected and responds; therapeutic interventions could still be effective, (iii) an irreversible state, where the system is seriously threatened. The Dynamical Network Biomarker (DNB) theory sought for early-warnings of the transition from health to disease. Such DNBs might range from individual genes to complex structures in transcriptional regulatory or protein-protein interaction networks. Here we revisit transcriptomic data obtained during infection of tobacco plants with tobacco etch potyvirus to identify DNBs signaling the transition from mild/reversible to severe/irreversible disease. We identified genes showing a sudden transition in expression along disease. Some of these genes cluster in modules that show the properties of DNBs. These modules contain both genes known to be involved in response to pathogens (e.g., ADH2, CYP19, ERF1, KAB1, LAP1, MBF1C, PR1, or TPS5) and other genes not previously related to biotic stress responses (e.g., ABCI6, BBX21, NAP1, OSM34, or ZPN1).

Summary: Studying biological systems generally relies on computational modeling and simulation, e.g., for model-driven discovery and hypothesis testing. Progress in standardization efforts led to the development of interrelated file formats to exchange and reuse models in systems biology, such as SBML, the Simulation Experiment Description Markup Language (SED-ML), or the Open Modeling EXchange format (OMEX). Conducting simulation experiments based on these formats requires efficient and reusable implementations to make them accessible to the broader scientific community and to ensure the reproducibility of the results. The Systems Biology Simulation Core Library (SBSCL) provides interpreters and solvers for these standards as a versatile open-source API in Java™. The library simulates even complex bio-models and supports deterministic Ordinary Differential Equations (ODEs); Stochastic Differential Equations (SDEs); constraint-based analyses; recent SBML and SED-ML versions; exchange of results, and visualization of in silico experiments; open modeling exchange formats (COMBINE archives); hierarchically structured models; and compatibility with standard testing systems, including the Systems Biology Test Suite and published models from the BioModels and BiGG databases. Availability and implementation: SBSCL is freely available at https://draeger-lab.github.io/SBSCL/.

In a safety-critical system typically not all provided services have the same criticality, which we call mixed-criticality systems. Criticality arithmetic, also called SIL arithmetic, is an approach to lower the development effort of a service by providing redundancy with tasks that are developed for a lower criticality level. In this paper we present ATMP-CA, which is a derivation of the multi-core scheduler ATMP. ATMP-CA is able to take into account the knowledge about the use of criticality arithmetic. ATMP-CA has a modified core allocation and procedure for utility optimisation, considering the context of the replicated tasks. We conducted experiments that show that ATMP-CA is able to provide the services using criticality arithmetic, while the reference schedulers were not.

One of the most popular techniques for determining electrical properties of material is the free-space measurement technique. With the potential for new applications requiring efficient, accurate and broadband material measurement systems using higher millimeter-wave and terahertz frequencies, the free-space measurement method has received renewed interest. This is mainly due to its simplicity, favorable properties as a non-destructive method, and it allows transmission and reflection measurements without any physical contact with the sample. This paper reviews and discusses state- of-the-art free space material measurement systems, starting with the different measurement techniques available for material characterization, their important concepts, post-processing in determining their properties, and progress towards expanding their use at higher frequencies. Also, this paper reviews dielectric material characterization using the free space method focusing on their application extension towards the higher frequencies. Besides, the algorithms for conversion methods and usage of lens in free space material measurement system was discussed in this paper. Finally, a future perspective on the outlook of this free space method is presented prior to the conclusion.

This article focuses on artificial intelligence in educational technology, starting with an introduction to educational technology, an interdisciplinary field of study that covers the design, development, utilization, and evaluation of technology and digital tools in educational Settings. A detailed description of its definition in an academic context - a multidisciplinary field of computer science and cognitive science that deals with the development of computational systems that exhibit intelligent behaviour, describing its areas of coverage and scope of application. It then introduces the benefits of AI in education technology, specifically addressing personalized learning, adaptive learning systems, automated scoring and feedback, virtual tutors and chatbots, data analytics, as well as content recommendations and natural language processing, accessibility and inclusion. Then it introduces the main concepts of AI personalized learning: AI personalized learning uses the power of artificial intelligence to meet the unique needs and preferences of individual learners, as well as its key principles and main characteristics. Adaptive learning systems harness the power of artificial intelligence and data analytics to tailor the learning experience to each student's needs and abilities, as well as its core principles and strengths. It also introduces the main operating principles of automated grading and feedback: it uses artificial intelligence and computer algorithms to evaluate and evaluate student assignments, tests and exams without the direct involvement of human graders, and its associated benefits. Secondly, the main concepts of virtual tutor are introduced: Virtual tutor is a computer-based system that uses artificial intelligence and machine learning algorithms to provide students with personalized and interactive educational support and its key characteristics and main advantages, and then the nature and benefits of chatbots and help in the field of education. The final conclusion summarizes the benefits and future challenges of integrating AI into educational technology.

Nanomedicine holds great potential to devise better drug delivery systems (DDSs). However, many reported nanomedicines still fall short of commercial requirements including specific targetability, scale-up manufacturing and safety. Cell/tissue based carriers, including cell membrane vehicle and exosome, are biocompatible and targeting platforms but usually suffered from low yields and unstable reproducibility. Here in this study, we proposed the concept and preparation of reconstituted lipid nanoparticles (rLNPs) to develop highly reproducible cell/tissue based lipid nanoparticles (LNPs) for drug delivery, which holds the potential as a versatile drug delivery platform. The whole lipids of cell or tissue were firstly extracted and then prepared into rLNPs using solvent diffusion method. In this way, the preparation of ultra-small (~20 nm) rLNPs can be easily applied to both cell (mouse breast cancer cell line, 4T1) and tissue (mouse liver tissue). Our results demonstrated that mouse liver tissue derived rLNPs can be further labeled/modified with imaging, targeting or other functional moieties. Furthermore, rLNPs were highly biocompatible and capable of loading different drugs including doxorubicin hydrochloride (Dox) and curcumin (Cur). Most importantly, Dox loaded rLNPs (rLNPs/Dox) showed preferable in vitro and in vivo anticancer performance. Therefore, rLNPs might be a versatile drug delivery platform for future application in the treatment of a variety of diseases.

One of the central criteria for free will is “Could I have done otherwise?” But because of a temporal asymmetry in human choice, the question makes no sense. The question is backward-looking, while human choices are forward-looking. At the time when any choice is actually made, there is as of yet no action to do otherwise. Expectation is the only thing to contradict (do other than). So the ability to do something not expected by the ultimate expecter, Laplace’s demon, is a better criterion for free will. If human action is fundamentally unpredictable, then we have free will. Scientists have studied a form of fundamental unpredictability, known as undecidability. The features that make a system capable of undecidable dynamics have been identified: program-data duality; potential to access an infinite computational medium; and the ability to implement negation. Humans have all three of these features, so we very likely are fundamentally unpredictable, so we have free will.

Urban air quality is increasingly becoming a cause for concern for the health of the human population. The poor air quality is already wreaking havoc in major cities of the world, where serious health issues and reduction of average human life by a factor of years are reported. The air quality in developing countries can become worse as they undergo development. The urban air quality varies non-linearly depending upon the various factors such as land use, industrialization, waste disposal, traffic volume, etc. To address this problem, it is necessary to look at the plethora of available literature from multiple perspectives such as types and sources of pollutants, meteorology, urban mobility, urban planning and development, health care, economics, etc. In this paper, we provide a comprehensive survey of the state-of-the-art in urban air quality. We first review the fundamental background on air quality and present the emerging landscape of urban air quality. We then explore the available literature from multiple urban air quality measurement projects and provides the insights uncovered in them. We then take a look at the sources that are significantly contributing to polluting the air quality. Finally, we highlight open issues and research challenges in dealing with urban air pollution.

This addendum contains clarifications and a sharpening of some of the results on the VIT transform framework developed in [1]. The focus is on the right-coefficient and left- coefficient forms of the transform, the extraction of a first-order term from a left polynomial fraction, and the application to linear time-varying systems.

Differential equation models to understand interaction between plant and nutrient solution are presented. The root cells selectively emit H+ ions with active transport consuming ATPs to establish electrical gradient along the cell membrane. It establishes electrical field with Nernst potential to make positively charged ions outside the cell membrane flow into the root cell. Anion influx is also modulated by H+ ion concentration because plant root cell absorbs negatively charged particles with symport. If an anion collides with H+ cell to make net charge as neutral, at symport channel, it can flow through. In this paper, mathematical models for cation and anion absorption are introduced. Cation absorption model was induced from Ohm's law combined with Goldman's equation. Anion absorption model is similar to chemical reaction rate model. Both models have physiological terms influenced by gene expression pattern, species or phenotypes. Cation model also includes terms for ion's kinetic and electrical properties, growth of plant and interaction between the root and the surroundings. Simulation for 20 different sets of coefficients showed that the physiology-related coefficient has important role on nutrition absorption tendencies of plants.

There has been a growing call for reform of the U.S. biomedical community in recent years. As a community, we face a growing list of issues including excessive waste, reproducibility, bias, inadequate training, and the absence of sustainable long-term planning that detract from the overall goal of advancing human health. In response to this debate, biomedical stakeholders have taken positive steps forward to remedy these issues. However, we must continually improve upon these steps to promote the long-term stability of the biomedical enterprise. Given the widespread interest of the scientific community in addressing these issues, there exists a unique opportunity to come together and create a new era of biomedical discovery. The completion of this exciting task requires reflection on our view and management of the system, and what the best route to sustainable change may be. Importantly, a coordinated approach that considers the collective make-up of the biomedical system and how processes and people influence collective output and create value for patients is needed. Here, these three areas and the concepts of systems theory, total quality management, and organizational development and their contribution to the management and effectiveness of biomedical discovery are discussed. Importantly recommendations are made concerning overall management strategy, process efficiency and quality research, administrative tasks, organizational cultural challenges, individual and team development, and funding strategy.

Background: Benveniste’s biology experiments suggested the existence of molecular-like effects without molecules (“memory of water”). In this article, it is proposed that these disputed experiments could have been the consequence of a previously unnoticed and non-conventional experimenter effect. Methods: A probabilistic modelling is built in order to describe an elementary laboratory experiment. A biological system is modelled with two possible states (“resting” and “activated”) and exposed to two experimental conditions labelled “control” and “test”, but both biologically inactive. The modelling takes into account not only the biological system, but also the experimenters. In addition, an outsider standpoint is adopted to describe the experimental situation. Results: A classical approach suggests that, after experiment completion, the “control” and “test” labels of biologically-inactive conditions should be both associated with “resting” state (i.e. no significant relationship between labels and system states). However, if the fluctuations of the biological system are also considered, a quantum-like relationship emerges and connects labels and system states (analogous to a biological “effect” without molecules). Conclusions: No hypotheses about water properties or other exotic explanations are needed to describe Benveniste’s experiments, including their unusual features. This modelling could be extended to other experimental situations in biology, medicine and psychology.

Entropy is a concept derived from Physics that has been used to describe natural and social systems’ structure and behaviour. Applications of the concept in the social sciences so far have been largely limited to the disciplines of economics and sociology. In the current paper the concept of entropy is applied to organizational citizenship behaviour with implications for urban organizational sustainability. A heuristic is presented for analysing personal and organizational citizenship configurations and distributions within a given workforce that can lead to corporate entropy; and for allowing prescriptive remedial steps to be taken to manage the process should entropy from this source threaten its sustainability and survival.

This work presents the results of the experimental and theoretical study of the static pull-in of tilting actuation executed by a hybrid levitation micro-actuator (HLMA) based on the combination of inductive levitation and electrostatic actuation. A semi-analytical model to study such the pull-in phenomenon is developed, for the first time, as a result of using the qualitative technique based on the Lagrangian approach to analyze inductive contactless suspensions presented in work and a recent progress in the calculation of mutual inductance and force between two circular filaments. The obtained non-linear model, accounting for two degrees of freedom of the actuator, allows us to predict accurately the static pull-in displacement and voltage. The results of modelling were verified experimentally and agree well with measurements.

We argue that a very large class of quantum pure states of isolated macroscopic bodies have sharply peaked energy distributions, with their width relative to the average scaling between $\sim N^{-1}$ and $\sim N^{-1/2}$, with $N \gg 1$, the number of atoms conforming the body. Those states are dense superpositions of energy eigenstates within arbitrary finite or infinite energy intervals that decay sufficiently fast. The sharpness of the energy distribution implies that closed systems in those states are {\it microcanonical} in the sense that only energy eigenstates very near to the mean energy contribute to their thermodynamic evolution. Since thermodynamics accurately describes processes of macroscopic bodies and requires that closed systems have constant energy, our claim is that these pure states are typical of macroscopic systems. The main assumption beneath the energy sharpness is that the isolated body can reach thermal equilibrium if left unaltered. We argue that such a self-sharpness of the energy in macroscopic bodies indicates that the First Law of Thermodynamics is statistical in character.

Effective water resources management requires assessments of water availability within a framework of complex institutions and infrastructure employed to manage extremely variable stream flow shared by numerous often competing water users and diverse types of use. The Water Rights Analysis Package (WRAP) modeling system is fundamental to water allocation and planning in the state of Texas in the United States. Integration of environmental flow standards into both the modeling system and comprehensive statewide water management is a high priority for continuing research and development. The public domain WRAP software and documentation are generalized for application any place in the world. Lessons learned in developing and implementing the modeling system in Texas are relevant worldwide. The modeling system combines: (1) detailed simulation of water right systems, interstate compacts, international treaties, federal/state/local agreements, and operations of storage and conveyance facilities; (2) simulation of river system hydrology; and (3) statistical frequency and reliability analyses. The continually evolving modeling system has been implemented in Texas by a water management community that includes the state legislature, planning and regulatory agencies, river authorities, water districts, cities, industries, engineering consulting firms, and university researchers. The shared modeling system contributes significantly to integration of water allocation, planning, system operations, and research.

Significance: Cellular redox processes are highly interconnected, yet not in equilibrium, and governed by a wide range of biochemical parameters. Technological advances continue refining how specific redox processes are regulated, but broad understanding of the dynamic interconnectivity between cellular redox modules remains limited. Systems biology investigates multiple components in complex environments and can provide integrative insights into the multi-faceted cellular redox state. This review describes the state of the art in redox systems biology as well as provides an updated perspective and practical guide for harnessing thousands of cysteine sensors in the redoxome for multi-parameter characterization of cellular redox networks. Recent Advances: Redox systems biology has been applied to genome-scale models and large public datasets, challenged common conceptions and provided new insights that complement reductionist approaches. Advances in public knowledge and user-friendly tools for proteome-wide annotation of cysteine sentinels can now leverage cysteine redox proteomics datasets to provide spatial, functional, and protein structural information. Critical Issues: Careful consideration of the analytical approaches is needed to broadly characterize the systems level properties of redox signaling networks and be experimentally feasible. The cysteine redoxome is an informative focal point since it integrates many aspects of redox biology. The mechanisms and redox modules governing cysteine redox regulation, cysteine oxidation assays, proteome-wide annotation of the biophysical and biochemical properties of individual cysteines, and their clinical application are discussed. Future Directions: Investigating the cysteine redoxome at a systems level will uncover new insights into the mechanisms of selectivity and context-dependence of redox signaling networks.

Linking climate action with sustainable development goals (SDGs) might incentivize social and political support to forest conservation. However, further examination of the conceptual entry points for linking efforts for reducing forest-based emissions with those for delivering SDGs is required. This review paper aims to contribute to fulfilling this research need. It provides insights into the links between conserving forests for climate change mitigation and peacebuilding. Specifically, the paper examines opportunities to harness climate finance for conserving forests and achieving long-lasting peace. It does so via a literature review and the examination of the Orinoquia region of Colombia. Findings from the literature review suggest that harnessing climate finance for conserving forests and peacebuilding is, in theory, viable if activities are designed in accordance with social, institutional, and economic factors. Meanwhile, the Orinoquia region provides evidence that these two seemingly intractable problems are proposed to be solved together. At a time when efforts for reducing forest-based emissions are being designed and targeted at (post-) conflict areas in Colombia and elsewhere, the paper’s findings might demonstrate to government agencies — both environmental and non-environmental — the compatibility of programs aimed at reducing forest-based emissions with efforts relating to peacebuilding and sustainable food.

Energy storage has become a fundamental component in renewable energy systems, especially those including batteries. However, during the charging and the discharging process, there are some parameters that are not controlled by the user. That uncontrolled working leads to aging of the batteries and a reduction of their life cycle. Therefore, it causes an early replacement. Different control methods have been developed with the goal of protecting the battery and extending its life expectancy, being the most used the constant current-constant voltage. However, several studies show that charging time can be reduced by using Fuzzy Logic Control or Model Predictive Control. Other benefits are; temperature control and an extension of life expectancy. For all these reasons, FLC and MPC have proven to be more efficient than traditional charge control methods.

Polymeric hydrogels are promising polymeric functional materials that have been widely used in the biomedical field as an emerging carrier of various therapeutic agents. Polymeric hydrogels as a carrier of therapeutics can leverage therapeutically beneficial outcomes of drug delivery than systemic chemotherapy and can provide spatial and temporal control over the release of various therapeutic agents. Polymeric hydrogels are cross-linked three-dimensional networks constructed by hydrophilic polymers and they are capable of absorbing and re-taining a large amount of water. Polymeric hydrogels share many physiochemical features with natural tissues due to their water abundance, biomimetic microstructure, and intrinsic flexibility. Polymeric hydrogels have excellent biocompatibility, biodegradability, and lower toxicity. Polymeric hydrogels enhance the convenience and efficiency of drug delivery by assisting in situ gelation and controlling drug release by changing their volume and other properties when it encounters some stimuli (e.g., heat, pH, light, and ultrasound). This review aims to outline the overview of polymeric hydrogels, properties, types, advantage, disadvantages, characteri-zation, and their application with present status and future perspective used for the delivery of therapeutics in pharmaceutical and biomedical sciences.

Abstract: The need to rapidly reduce GHG has accelerated the adoption of circular models of production. However, this has proved to be a challenging task for SMEs, who lack the financial, organizational and informational capabilities to implement circular business models. In this context, calculating the carbon footprint (CF) of their products could provide the basis for assessing the different circular economy (CE) practices. The aim of this study is to present a CF calculation tool that can be used to calculate the CF of SMEs. The design of the tool was based on the Life Cycle Assessment (LCA) methodology, taking into account the various barriers that SMEs face in adopting CE practices. The tool was tested in a small cheese factory in northern Greece. The pro-duction process was mapped, a GHG inventory was created and the total emissions related to the production of a specific product was estimated. The final aim is to test this tool at a large scale.

When dealing with galactic dynamics, or more specifically, with galactic rotation curves, one basic assumption is always taken: the frame of reference relative to which the rotational velocities are given is assumed to be inertial. In other words, fictitious forces are assumed to vanish relative to the observational frame of a given galaxy. It might be interesting, however, to explore the outcomes of dropping that assumption; that is, to search for signatures of non-inertial behavior in the observed data. In this work, we show that the very discrepancy in galaxy rotation curves could be attributed to non-inertial effects. We derive a model for spiral galaxies that takes into account the possible influence of fictitious forces and find that the additional terms in the new model, due to fictitious forces, closely resemble dark halo profiles. Following this result, we apply the new model to a wide sample of galaxies, spanning a large range of luminosities and radii. It turns out that the new model accurately reproduces the structures of the rotation curves and provides very good fittings to the data.

A global approach towards quality management highlights the need for constructing a new body of knowledge that views the field of global quality from a systems perspective. Based on the results of field experiments, and in light of the need to develop new global quality management terminology, the current article presents several key concepts in this field, with emphasis on a systems-oriented rationale and perspective. As such, the article is an important stage in building this body of knowledge, and towards the conceptualization of key variables used in global quality management, from a systems approach that interacts with the fields of international management and strategic management.

Objective A trained T1 class Convolutional Neural Network (CNN) model will be used to examine its ability to successfully identify motor imagery when fed pre-processed electroencephalography (EEG) data. In theory, and if the model has been trained accurately, it should be able to identify a class and label it accordingly. The CNN model will then be restored and used to try and identify the same class of motor imagery data using much smaller sampled data in an attempt to simulate live data. Approach PyCharm, a Python platform, will be used to house and process the CNN. The raw data used for the training of the CNN will be sourced from the PhysioBank website. The EEG signal data will then be pre-processed using Brainstorm software that is a toolbox used in conjunction with MATLAB. The sample data used to validate and test the trained CNN, will be also be extracted from Brainstorm but in a much smaller size compared to the training data which is comprised of thousands of images. The sample size would be comparable to a person wearing a Brain Computer Interface (BCI), offering approximately 20 seconds of motor imagery signal data. Results The raw EEG data was successfully extracted and pre-processed. The deep learning model was trained using the extracted image data along with their corresponding labels. After training, it was able to accurately identify the T1 class label at 100 percent. The python coding was then modified to restore the trained model and feed it test sample data in which it was found to recognise 6 out of 10 lines of T1 signal image data. The result suggested that the initial training of the model required a different, more varying approach, so that it would be able to detect varying sample signal image data. The outcome of which could mean that the model could be used in applications for multiple patients wearing the same BCI hardware to control a device or interface.

Currently, there are several challenges that Cloud-based health-care Systems, around the world, are facing. The most important issue is to ensure security and privacy or in other words to ensure the confidentiality, integrity and availability of the data. Although the main provisions for data security and privacy were present in the former legal framework for the protection of personal data, the General Data Protection Regulation (GDPR) introduces new concepts and new requirements. In this paper, we present the main changes and the key challenges of the General Data Protection Regulation, and also at the same time we present how the Cloud-based Security Policy methodology proposed in [1] could be modified in order to be compliant with the GDPR and how Cloud environments can assist developers to build secure and GDPR compliant Cloud-based health Systems. The major concept of this paper is, primarily, to facilitate Cloud Providers in comprehending the framework of the new General Data Protection Regulation and secondly, to identify security measures and security policy rules for the protection of sensitive data in a Cloud-based Health System, following our risk-based Security Policy Methodology that assesses the associated security risks and takes into account different requirements from patients, hospitals, and various other professional and organizational actors.

This paper presents a configuration of dual output single phase current source inverter with 6 switches for microgrid applications. The inverter is capable of delivering power to two independent set of loads of equal voltages or different voltages at the load end. The control strategy is based on Integral Sliding Mode Control (ISMC). The remote monitoring of the inverter is performed with cyber infrastructure. The cyber physical test bench is developed based on Reconfigurable I/O processor (NI MyRIO-1900) for control and monitoring of the inverter. The inverter prototype is tested in cyber physical test bench in laboratory conditions. The performance of the inverter is analyzed and monitored through the remote system. Also, the inverter is analyzed with different voltage conditions.

The present work proposed a low-cost portable device as an enabling technology for Smart Farms using multispectral imaging and Machine Learning in soil texture. Clay is an important factor for the verification and monitoring of soil use due to its fast reaction to chemical and surface changes. The system developed uses the analysis of reflectance in wavebands for clay prediction. The selection of each wavelength is performed through an LED lamp panel. A NoIR microcamera controlled by a Raspberry Pi device is employed to acquire the image and unfold it in RGB histograms. Results showed an good prediction performance with R2 of 0.96, RMSEC of 3.66% and RMSECV of 16.87%. The high portability allows the equipment to be used in a field providing strategic information related to soil sciences.

: For decades the city has created food models by requiring the countryside to meet the growing demand with increasingly more homologated crop reconversions and increasingly vast and competitive farms. The current acceleration of the land concentration process and the dramatic experience of the COVID 19 pandemic have, however, forced us to redefine the city-country relationship, which has been called into question for some years now in various FAO and EU documents. Based on the GECOAGRI-LANDITALY survey itinerary, a proven tool for reading local peculiarities, the AAs show how easy it is to recognize which farmlands can best fulfil the role of guaranteeing food safety and protecting the quality and typicality of traditional foods. The final proposal is to start a new agri-food policy that no longer starts from the demand formulated by the city but, reversing the direction of the old relationship, it starts from the availability of products offered by the countryside to re-educate consumption and promote the sustainability of agricultural practices.

Adaptable or adapted? Whether it is a question of physical, biological or even economic systems, this problem arises when all these systems are the location of matter and energy conversion. To this interdisciplinary question we propose a theoretical framework based on the two principles of thermodynamics. Considering a finite time linear thermodynamic approach, we show that non-equilibrium systems operating in quasi-static regime are quite deterministic as long as boundary conditions are correctly defined. The Novikov-Curzon-Ahlborn approach [1,2] applied to non-endoreversible systems then makes it possible to precisely determine the conditions for obtaining characteristic operating points. As a result, power maximization principle (MPP), entropy minimization principle(mEP), efficiency maximization, or waste minimization states are only specific modalities of system operation. We show that boundary conditions play a major role in defining operating points because they define the intensity of the feedback that ultimately characterizes the operation. Armed with these thermodynamic foundations, we show that the intrinsically most efficient systems are also the most constrained in terms of controlling the entropy and dissipation production. In particular, we show that the best figure of merit necessarily leads to a vanishing production of power. On the other hand, a class of systems emerges which, although they do not offer extreme efficiency or power, have a wide range of use and therefore marked robustness. It therefore appears that the number of degrees of freedom of the system leads to an optimization of the allocation of entropy production.

The role of fractional calculus in circuit systems has received increased attention in recent years. In order to evaluate the effectiveness of time-domain calculation methods in the analysis of fractional-order piecewise smooth circuit systems, an experimental prototype is developed and the effects of three typical calculation methods in different test scenarios are compared and studied in this paper. It is proved that Oustaloup’s rational approximation method usually overestimates the peak-to-peak current and brings in pulse-voltage phenomenon in piecewise smooth test scenarios, while the results of two iterative recurrence-form numerical methods are in good agreement with the experimental results. The study results are dedicated to provide a reference for efficiently deploying calculation methods in fractional-order piecewise smooth circuit systems. Some quantitative analysis results are concluded in this paper.

Motivated by the way animals react in nature, we introduce a fully-connected neural-network model, which incorporates the external pattern presented to the system as a fundamental tool of the recognition process. In this new scenario, in the absence of this external field, memories are not attractors inside basins of attraction, as in usual attractor neural networks, although basins may be created according to the external pattern, thus allowing storing a much larger number of memories. The key point consists in calibrating the influence of the external pattern such as to cancel the noise generated by those memories not correlated with the external pattern.We illustrate how this proposal works by including this new contribution in the standard Hopfield model, showing a significant increase in its recognition capacity (typically by a factor $10^{2}$). As an additional feature of this model, we show its ability to react promptly to changes in the external environment, a crucial attribute of living beings. This procedure can be applied to a wide variety of neural-network models to increase considerably their recognition and reaction capabilities.

This paper aims to show that sustainable behavior by firms may be impaired by regulatory restrictions. We challenge the assumption that regulation aimed at curbing greenhouse gas emissions (GHG) on the form of a target to meet the Country’s GHG emissions commitments will promote sustainable corporations. We argue that, in fact, such regulation may impair sustainability practices because it creates unintended consequences. This paper tackles the efficiency of the institutional framework chosen through the lenses of the analytical themes of fit, scale and interplay, then we use a systems dynamic approach to represent how regulation in the arenas of energy efficiency and GHG emissions reduction may withhold competitive business outcomes and corporate sustainability schemes. We exemplify and simulate a single regulation scheme and found that as a result of the institutional scheme chosen, the system is dominated by negative feedback processes resulting in lesser outcomes that would be better tackled by firms not being subject to the restrictions imposed by the regulation.

In the last few decades, a lot has been written on the use of sustainable agriculture to improve ecosystem services for resilience to climate change. However, no tangible and systematic evidence exists on how this would participate in alleviating impacts on vulnerable rural communities. This paper provides a narrative systematic review (SR) integrated with a bibliometric analysis and a concept network analysis to understand how, in a changing climate, sustainable agriculture builds the resilience of agro-systems. The search was set from the date of the first relevant article until the end of 2018. Results generated have demonstrated that: a. Only single practices and methods have been studied to assess impacts on single ecosystem services. b. Soil quality and health are considered a key indicator of sustainable agriculture. c. Albeit the assessed practices and methods have shown to improve the biodiversity of agro-systems, which makes them more resilient to extreme climate events, we are still far from reaching interdisciplinary and multi-dimensional agriculture which integrates all management aspects and generates a full range of ecosystem services. In conclusion, the study addressed the following recommendations for the scientific community and for decision-makers to orient future research strategies and efforts: a. Integration of all agro-systems services into sustainable management using an ecosystem-based approach on a life-cycle basis using Life Cycle Assessment (LCA) method; b. Improving the scientific understanding of traditional knowledge for higher synergies and for further integration; c. Unification of assessment methods and indicators for the quantification of impacts; d. Creation of a platform to share, monitor, screen, and approve assessments and evaluations of sustainable agriculture by region.

Abstract: Agroforestry has a sustainable attributes with both tangible and nontangible benefits. In this study carbon mitigation and credits potential of traditional agroforestry systems at different elevations were evaluated. These traditional systems are: Agrihortisilviculture system (AHS), Agrihorticulture system (AH) and Agrisilviculture system (AS). Stand density, living biomass carbon and soil carbon were measured in each sample plot. The results were that stand density of woody perennials varied from 61 to 233 tree ha-1 across t elevations and systems, and , Grewia oppositifoila was the predominant tree species occupying most of the agroforestry land use system. Plant and soil organic carbon were significantly different (P ≤ 0.05) among systems and elevations. Total carbon including plant and soil was significantly higher in the AH system at upper elevations. Total carbon emmision mitigation varied with changing elevations and systems, being highest at lower elevation with AHS system. The total carbon credits was also recorded high at lower elevation, whereas the total value of C credits was higher at mid elevation due to the estimated agroforestry area. The total value of C credits from all agroforestry systems was observed (128977.59 €) of the study area.

The objective of this work is to present the results of an investigation on the technological, pedagogical and content knowledge evidenced by mathematics teachers in the second-level of initial training (preservice) at the Universidad Nacional, from the TPACK model perspective, on the subject of functions. The research has a qualitative approach with an interpretive hermeneutical stance. A sample of 27 teachers in training who were enrolled in courses related to the three base domains of the TPACK model (pedagogical, technological and content of quadratic function) during the first semester (I cycle) of 2020 was used. A theoretical inquiry was carried out that allowed the creation of an instrument that made possible the description of the participants’ knowledge based on this model focused on the topic of quadratic function. The results show that participants possess instrumental dominance over the basic forms of knowledge underlying the model. It is concluded that, although participants have already experimented in courses related to these forms of knowledge, there is insufficient evidence to ascertain that their current knowledge would allow them to integrate technologies as a didactic resource within the teaching of the subject of quadratic function.

The runtime environment is an important concern for self-adaptive systems (SASs). Although researchers have proposed many approaches for developing SASs that address the issue of uncertain runtime environments, the understanding of these environments varies depending on the objectives, perspectives, and assumptions of the research. Thus, the current understanding of the environment in SAS development is ambiguous and abstract. To make this understanding more concrete, we describe the landscape in this area through a systematic literature review (SLR). We examined 128 primary studies and 14 unique environment models. We investigated concepts of the environment depicted in the primary studies and the proposed environment models based on their ability to aid in understanding. This illustrates the characteristics of the SAS environment, the associated emerging environmental uncertainties, and what is expressed in the existing environment models. This paper makes explicit the implicit understanding about the environment made by the SAS research community and organizes and visualizes them.

Buildings consume 30% of the total energy consumption around the globe and 29% of the energy consumption in Egypt which in 2022 had a total population of 102 million, out of which 43 % live in urban areas . The operation of buildings contributes to around 30% of global CO2 emissions due to their high energy consumption (IEA, 2022a). Among the efforts made towards improving the energy efficiency of buildings are Advanced Energy Design Guides (AEDGs), building rating systems, codes, and standards. Furthermore, numerous research studies that are either literature review studies, experimental studies, or computational studies addressed the topic of energy efficiency in buildings. These are all examined in this literature review with the purpose of identifying the research gap in available research with a focus on Egypt. The identified gap is the development of a prescriptive path for the GPRS energy efficiency category based on whole building energy simulations.

Malaysia became the centre of international attention when it democratically removed a semi-authoritarian government of 62 years during its 14th general election this year. This electoral success has provided geriatric medicine in Malaysia with the unexpected ageing icon in the oldest prime minister in the world. Political change has led to a wave of optimism for the expansion of geriatric services in Malaysia, which has met with numerous challenges in the last two decades. The number of geriatrics specialists and services had already begun expanding under the previous government. However, existing geriatricians will need to reassess the landscape of delivery and access of care in our rapidly growing ageing population and develop new strategies to truly expand their services. In addition to unrelenting efforts in the recruitment and training of future geriatricians, the steady expansion of the geriatric workforce should take into account the inclusion of geriatric medicine in the undergraduate training curricula of all healthcare professionals. Expansion of geriatric services will also be a cost-effective strategy to reduce the growing national healthcare budget incurred by the growing needs of an ageing population.

Environmental and economic needs drive the increased penetration of intermittent renewable energy in electricity grids, enhancing uncertainty in market conditions prediction and network constraints. Thereafter, the importance of energy systems with flexible dispatch is reinforced, ensuring energy storage as an essential asset for these systems to be able to balance production and demand. In order to do so, such systems should participate in whole-sale energy markets, enabling competition among all players, including conventional power plants. Consequently, an effective dispatch schedule considering market and resource uncertainties is crucial. In this context, an innovative dispatch optimization strategy for schedule planning of renewable systems with storage is presented. Based on an optimization algorithm combined with a machine learning approach, the proposed method develops a financial optimum schedule with the incorporation of uncertainty information. Simulations performed with a concentrated solar power plant model following the proposed optimization strategy demonstrate promising financial improvement with a dynamic and intuitive dispatch planning method, emphasizing the importance of uncertainty treatment on the enhanced quality of renewable systems scheduling.

Optical current sensors have been developed and improved in recent decades, and their use has been widespread in power systems, including smart grids. Like any measuring instrument or system, the result of its measurements is associated with a measurement uncertainty, which quantifies its precision. This article presents a review of the main uncertainty contributions that affect the quality and performance of optical current sensors.

In recent years web applications and on-line business transactions have grown many folds. Consequently, also cyberattacks have increased and represent a serious threat to the pervasive digital services upon which our society relies. To mitigate cyberattacks, many countermeasures are deployed on computing nodes (e.g., anti-malware software) as well as on network devices to detect and possibly block malicious packets in transit; these monitoring devices broadly go under the name of firewalls. Firewalls are designed according to two main architectural approaches: software running on a standard or embedded computer, or purposedly designed hardware, e.g., ASICs. Software-based solutions have the advantage of high flexibility and can be ported on easily upgradable hardware. However, hardware implementation represents the only viable solution for high data rates. On the market, very fast devices of the latter kind are available, but their cost is typically very high, especially considering that their ultra-optimized design makes updating them very difficult, with the consequence of a rather short lifespan. As a more balanced alternative, we wanted to investigate the use of an FPGA architecture, , which is significantly easier to update than custom-built chips, and features low-latency and high-throughput characteristics concurrently, making it preferrable to other programmable systems based on GPUs or microcontrollers. In this paper a packet sniffer that has been designed on FPGA with a 1 Gbit/s data transfer rate is presented. The system is implemented on the FPGA development board KC705 by Xilinx, can analyze Ethernet frames, checking the frame fields against a set of rules defined by the user and calculates statistics of the received Ethernet frames over time. The designed packet sniffer has been successfully tested both with Ethernet frames ad hoc generated using a packets generator, and with real web traffic by connecting the packet sniffer to the internet.

In response to the problem of increasing climate change and energy security, investment in renewable energy sources has increased significantly both in Europe and globally. Wind and solar power plants are expected to be the largest contributors to global decarbonization, ranking first and second in projected capacity by 2050. Since all power plants have some impact on the environment, this also applies to photovoltaic power plants. Because of the large capacities projected for PV installed capacity, their environmental impacts should be evaluated. The environmental impacts of PV power plants change over time. Improving the manufacturing technology of PV system components, increasing the efficiency of solar cells, and using materials that are less harmful to the environment will reduce these impacts. Manufacturing PV system components is a highly energy-intensive process that involves greenhouse gas emissions. As new renewable energy capacity is built, the amount of "green" electricity on the grid increases, reducing CO2 emissions per kWh consumed. The objective of this paper is to analyze the current status of the environmental impact of PV power plants under these changing conditions in terms of CO2 emissions, land use, pollutant and noise emissions, and water consumption. The capacity installed to date will reach the end of its lifetime by 2050, which means that the amount of waste associated with it will increase over time. This can have a significant impact on the environment, which is why part of the work is dedicated to this problem. In addition to the available information from the literature, in the part related to land use, the authors also made their own estimates based on data on newly installed PV power plants and PV modules available on the market. The results of the analysis show that there is enough land both in Europe and worldwide to install the planned capacities of rooftop and ground-mounted PV power plants. CO2 emissions are at the same level as for concentrated solar power, with a decreasing trend. Pollutant emissions, noise and water consumption are not a major problem compared to other types of power plants. Overall, it can be concluded that the expansion of PV capacity has a very positive impact on the environment.

Hydrogeological maps must synthesize the scientific knowledge about the hydraulic features and the hydrogeological behavior of a specific area, and, at the same time, they must meet the expectations of land planners and administrators. Thus, especially in complex interconnected systems, hydrogeological maps can be fully effective when they are purpose-designed. In these contexts, usual graphical approaches in creating hydrogeological maps could result uncomplete and/or ineffective. Therefore, in case of complex systems and/or specific management/protection aims, new and purpose-designed graphical solutions must be applied to enhance the maps effectiveness. In the case study, these solutions show and emphasize all the hydraulic interconnections playing significant roles in recharging the multilayered alluvial aquifer, where the majority of wells have been drilled for drinking/industrial/agricultural purposes, artificial channels are used for agricultural purposes, and the shallow groundwater feeds protected groundwater-dependent-ecosystems. The hydrogeological map was then designed to be the synthesis of three different and hydraulically interconnected main contexts: (i) the main heterogeneous alluvial aquifer (the main target of the purpose-designed map), (ii) the hydrographic basin of a losing river that feeds the main alluvial aquifer, and (iii) those hard-rock aquifers (mainly turbiditic and ophiolitic) whose springs feed the same river.

Smart local energy systems (SLES) have been promoted in policy as a solution to decarbonisation challenges which also bring wider benefits, such as community prosperity and energy affordability. But the combination of conditions required to enable their successful emergence and operation are still to be elaborated. This paper reports on the development of a Theory of Change (ToC) for the “societal project” of emergence of SLES with benefits. ToC is a process of making explicit the causal links by which activities lead to outcomes, surfacing assumptions, and recognising possible unintended consequences. We describe the ToC development process, involving consultation and collaboration across a research consortium. It consists of layers (e.g. users, skills, data and digital), and shows conditions considered necessary to deliver SLES, and for these to deliver wider benefits. It also provides interactive links to evidence emerging from the consortium, as well as policy/governance conditions and metrics. We reflect on potential uses of the ToC – internally to the consortium and externally – along with challenges we encountered in pursuing this approach. Policy implications relate to the importance of enabling conditions across multiple sectors, the absence of any of which could inhibit delivery of either SLES or their ensuing benefits.

Remanufacturing is a viable option to extend the useful life of an end-of-use product or its parts, ensuring sustainable competitive advantages under the current global economic climate. Challenges typical to remanufacturing still persist, despite its many benefits. According to the European Remanufacturing Network a key challenge is lack of accurate, timely and consistent product knowledge as highlighted in a 2015 survey of 188 European remanufacturers. With more data being produced by electric and hybrid vehicles, this adds to the information complexity challenge already experienced in remanufacturing. Therefore, it is difficult to implement real-time and accurate remanufacturing for the shop floor; there are no papers that focus on this within an electric and hybrid vehicle environment. To address this problem this paper attempts to (1) identify the required parameters/ variables needed for fuel cell remanufacturing by means of interviews (2) rank the variables by Pareto analysis (3) develop a casual loop diagram for the identified parameters/ variables to visualise its impact on remanufacturing (4) model a simple stock and flow diagram to simulate and understand data and information-driven schemes in remanufacturing.

The pneumatic muscle is an actuator well known for its inherited compliance. In the last years, there have been a lot of applications of these actuators, mainly oriented toward medical devices. However, there are few papers that use muscle as a model associated with mechanical structures. These actuators are difficult to control because their stiffness depends on the applied pressure, determining a non-linear behavior. This article presents a model, created in Matlab, considering the muscle as a kinematic structure. The model is simulated as an individual structure and a PID controller is applied to test the response. Then, these results are validated by experimental tests done in the laboratory on different types of muscles. Comparison results validate the accuracy of the model.

Expert system approach, although quite old, is still quite effective in scientific areas where experts are required to make diagnoses and predictions. One of those areas is fish disease diagnosis. It is an application domain that currently employs complicated processes, which require high level skills for making accurate diagnoses. On the other hand, complete datasets for full diagnosis to be able to use machine learning techniques are not available. Therefore, in aquaculture, now more than ever, fish farmers do not have the required expertise or equipment to accurately diagnose a fish disease. For that reason, expert systems that can help in the diagnosis, prevention and treatment of diseases have been developed. In this paper, we attempt to give an overview of the expert system approaches for fish disease diagnosis developed in the last two decades. Based on the analysis of their technical and non-technical characteristics, we propose an expert system architecture and a fish disease diagnosis process aiming at improving the deficiencies of existing such systems. The proposed system can handle all kinds of fish diseases based on image and non-image data as well as on molecular tests results and can provide explanations. The diagnosis process goes through four consecutive levels, where each next level considers an additional category of parameters and provides diagnoses with higher certainty.

In this paper we present a successful implementation of the Hindmarsh–Rose model within a SC environment. The merits of the proposed approach are design simplicity, due to stochastic computing, and the ease of implementation. Simulation results showed that the approximation achieved is equivalent to introducing a noise source into the original model. A study for the level of noise introduced, according to the number of bits in the stochastic sequence, has been performed. Additionally, we demonstrate that such an approach, even though it is noisy, it reproduces the behaviour of biological systems, which are intrinsically noisy. It is also demonstrated that a speedup of x2 compared to biological systems is easily achievable, with a very small number of gates, thus paving the road for the in silico implementation of large neuron networks.

This study conducts a comprehensive review of the integration of Hybrid Electric Turbochargers in mass-produced road vehicles. The primary objective is to inform the readers about the potential advantages and innovative applications of HETs. Employing a SWOT analysis, the research compares the performance of HETs on thermal engines versus traditional turbochargers and HETs on thermal engines versus HETs on hybrid engines based on a synthesis of multiple research findings. The study elucidates the fundamental mechanics of turbochargers, emphasizing their inherent benefits. Additionally, it introduces a novel approach with the integration of the hy-brid-electric turbocharger, demonstrating its capacity, supported by practical examples. The in-corporation of turbochargers with energy recovery mechanisms, including HETs, is shown to significantly contribute to emissions reduction. Moreover, the electric drive facilitates the utili-zation of hybrid turbines, particularly on low-displacement engines, resulting in enhanced effi-ciency, torque, and liter power. In conclusion, the research underscores the potential of HETs to substantially mitigate the environmental impact of the transportation sector by reducing emis-sions and conserving energy. Their ability to optimize the fuel efficiency and power output of internal combustion engines, coupled with the feasibility of downsized engines, positions HETs as an attractive option for both manufacturers and consumers. However, it is acknowledged that the implementation of HETs is in its early stages, necessitating further research to comprehensively understand their environmental impact. Despite this, the promising positive impact on the en-vironment designates HETs as a technology deserving close attention in the forthcoming years.

In this paper, we present an innovative technique that improves the convergence order of iterative schemes that do not require the evaluation of Jacobian matrices. Using this procedure, we achieve a remarkable increase in the order of convergence, raising it from p to p + 3 units, which results in a remarkable improvement in the overall performance. We have conducted comprehensive numerical tests in various scenarios to validate the theoretical results, showing the efficiency and effectiveness of the new Jacobian-free schemes.