This paper proposes an innovative mechatronic piezo-actuated module to control vibrations in modern machine tools. Vibrations represent one of the main issues that compromise seriously the quality of the workpiece. The active vibration control (AVC) device is composed by a host part integrated with sensors and actuators synchronized by a regulator, able to make a self-assessment and adjust to the environmental alteration. This study presents the mechatronic model based on the kinematic and dynamic analysis of the AVC device. To ensure a real time performance, a H2-LQG controller has been developed and validated by simulations involving machine tool, PZT actuator and controller models. The Hardware-in-the-loop (HIL) architecture is adopted to control and attenuate the vibrations. A set of experimental tests has been performed to validate the AVC module on a commercial machine tool. The feasibility of the real time vibration damping is demonstrated and the simulation accuracy is evaluated.

Nowadays, unmanned vehicles are widely used in various fields. However, the safety of unmanned vehicles is directly determined by the autopilot systems, and sensor faults are a very critical factor that affects the normal operation of the autopilot systems. To efficiently and comprehensively test unmanned systems for sensor faults, this paper proposes a chip-level testing platform for unmanned vehicle autopilot systems based on FPGA hardware-in-the-loop simulation. Unlike existing testing platforms, the introduction of FPGA technology allows us to achieve nanosecond real-time simulation frequency, thus realizing chip-level simulation of sensors and black-box automated testing. Firstly, we propose a set of general platform and modeling methods, and the paper presents a detailed application of the four most common necessary sensors in autopilot systems as examples. Secondly, we propose for the first time a chip-level fault testing method for unmanned systems, and build a test platform with a quadrotor vehicle, the PX4 software platform, and the Pixhawk4 hardware platform as examples. Finally, the experimental results verify that the testing platform proposed in this paper can adapt to various autopilot systems and has high simulation test reliability.

Grid energy storage system for PV Applications is connected with three different power sources i.e. PV Array, Battery and the Grid. It is advisable to have Isolation between these three different sources to provide safety for the equipment. The configuration proposed in this paper provides the complete isolation between the three sources. A Power Balancing Control (PBC) for this configuration is proposed to operate the system in three different modes of operation. Control of a dual active bridge (DAB) based battery charger which provides a galvanic isolation between batteries and other sources is explained briefly. Various modes of operation of a Grid energy storage system are also presented in this paper. Hardware-In-Loop (HIL) Simulation is carried out to check the performance of the system and the PBC algorithm. Power circuit (comprises of inverter, dual active bridge based battery charger, grid, PV cell, batteries, contactors and switches) is simulated and the controller hardware and user interface panel are connected as HIL with the simulated power circuit through Real Time Digital Simulator (RTDS). HIL simulation results are presented to explain the control operation, steady state performance in different modes of operation and the dynamic response of the system.

This work studies a novel low voltage (<60 V) hybrid system that supports engine boosting and downsizing in addition to start-stop, regenerative braking, and constrained torque assist/regeneration. The hybrid power split supercharger (PSS) shares a 9 kW motor between supercharging the engine or providing hybrid functionalities through a planetary gear set, a brake and a bypass valve. The PSS operation is limited to only one of the parallel hybrid or boosting modes at a time, necessitating a highly optimized decision making algorithm to select the device mode and power split ratio. In this work an adaptive equivalent consumption minimization strategy (A-ECMS) is developed for energy management of the PSS. The A-ECMS effectiveness is compared against a dynamic programming (DP) solution with full drive cycle preview through hardware-in-the-loop experiments on an engine dynamometer testbed. The experiments show that the PSS with A-ECMS reduces a vehicle fuel consumption by 18.4% over standard FTP75 cycle compared to a baseline turbocharged engine, while global optimal DP solution decreases the fuel consumption by 22.8% compared to baseline.

Collision avoidance is an important feature in advanced driver-assistance systems, aiming at providing correct, timely and reliable warnings before an imminent collision (objects, vehicles, pedestrians, etc.). A co-simulation framework is proposed in this paper to address the design and evaluation of collision avoidances in a cyber-physical system. The co-simulation framework is supported on the interaction between SCANeR and Matlab/Simulink. From the best of authors’ knowledge, two main contributions are reported in this paper. Firstly, the modelling and simulation of virtual on-chip LIDAR sensors in a cyber-physical system (CPS) considering traffic scenarios is presented. The CPS is designed and implemented in SCANeR. Secondly, an obstacle recognition library with three specific Artificial Intelligence-based methods is also designed based on sensory information database provided by SCANeR. Three methods for collision avoidance detection are considered, i.e.; a multi-layer perceptron neural network, a self-organization map and a support vector machine. Finally, a comparison among these methods for detecting obstacles before different weather conditions is done with very promising results in terms of accuracy. The best results are achieved using the multi-layer perceptron in sunny and fog conditions, the support vector machine in rainy and self-organized map in snowy conditions.

A programmable DC power supply with Real-time Digital Simulator (RTDS)-based photovoltaic (PV) Power Hardware-In-the-Loop (PHIL) simulators have been used to improve the control algorithm and reliability of PV Inverter. This paper proposes a supervisory control algorithm for PV PHIL simulator with non-RTDS device that is an alternative solution of high cost PHIL simulator. However, when such a simulator with conventional algorithm which is used in RTDS is connected to a PV inverter, the output is in the transient state and it makes it impossible to evaluate the performance of the PV Inverter. Therefore proposed algorithm controls the voltage and current target values according to the constant voltage (CV) and constant current (CC) modes to overcome the limitation of the Computing Unit, DC power supply and also uses a multi-rate system to account for the characteristics of each component of simulator. A mathematical models of a PV system, programmable DC power supply, isolated DC measurement device and Computing Unit are integrated to form a real-time processing simulator. Performance tests using a PV PHIL simulator which is applied proposed algorithm connected a PV inverter are carried out and proved superiority and utility of this method against conventional methods.

In order to realize the tram's low-floor structure, most of the trams that have been recently introduced adopt an independently rotating wheelset. In the case of trains driving in two regions with different gauges, an independently rotating wheelset may be applied to utilize the variable track technology. Since the independent rotation type wheelset has no rotational restraint of the left and right wheels, the difference in rotational speed between the outer and inner wheels occurs naturally during curved driving, and it is applied to railroad vehicles traveling in steep curve sections because it smoothly drives curved driving. However, the longitudinal creep force and the lateral restoring force are weakened as the left and right rotational constraints disappear. Lack of transverse direction restoring force weakens stability while causing continuous flange contact driving or zigzag phenomenon against disturbance. Under the conditions of driving in a steep curve, these railway vehicles generate excessive wear, noise, and lateral pressure, as well as deterioration of ride comfort and derailment. In order to overcome these drawbacks, a method has been proposed in which the torque of a motor mounted on each wheel is individually controlled to generate lateral restoring force or to improve driving performance through lateral displacement control using a yaw moment. In this paper, development using HILs was performed to check the performance and stability of the individual motor torque control technology before verifying by applying the individual motor torque control to the actual vehicle. HILs were constructed by combining a real-time dynamic analysis model of a railway vehicle with a drive motor to which real individual motor control was applied. Under the conditions of driving the test track where the actual test vehicle was tested, the analysis of the driving characteristics and the control characteristics of the disturbance was performed to confirm the proposed individual motor torque control performance.

Software-In-The-Loop (SITL) simulation tools have been extensively used in development of safety-critical software. Utilizing these tools substantially accelerates software development eliminating potential risks and resource costs of physical experiments. This paper investigates the effects of model specific parameters on the development and testing of custom module in PX4 SITL environment. Models of a fixed-wing unmanned aerial vehicle with vertical takeoff and landing capabilities and steerable sensor platform/gimbal are used as case study for this investigation. The effects of parameters of these aerial vehicle and sensor platform models are taken into consideration in the development of custom module that controls the dynamics of steerable sensor platform mounted on the vehicle model. The work also presents steps necessary to customize PX4 SITL and Gazebo simulation environment to incorporate parameters of the vehicle and sensor platform models in the development and testing process of custom module. Based on these instances, simulation results are obtained and discussed. The results show that reliability of PX4 SITL simulation framework is justified by proper customization and integration of PX4 SITL and Gazebo simulator.

Lower limb exoskeletons have the potential to reduce the prevalence of work-related musculoskeletal disorders; however, they often lack user-oriented control strategies. Human-in-the-loop (HITL) controls can adapt an exoskeleton’s assistance in real-time, to optimize the user-exoskeleton interaction. This study presents a HITL control for a knee exoskeleton to minimize the users’ physical effort, a parameter innovatively evaluated by their interaction torque with the exoskeleton (a muscular effort indicator) and metabolic cost. This work innovates by estimating the user’s metabolic cost within the HITL control through a machine-learning model. The regression model was able to estimate the metabolic cost, in real-time, with a root-mean-squared error of 0.66 W/kg and a mean absolute percentage error of 26%, making faster (10s) and less noisy estimations than a respirometer (K5, Cosmed) device. The HITL reduced the user’s metabolic cost and interaction torque by 7.3% and 32.3%, respectively, when compared to a zero-torque control. The developed HITL control surpassed both a non-exoskeleton and a zero-torque condition regarding the user’s physical effort, even for a simple task such as slow walking. Furthermore, the user-specific control enabled a lower metabolic cost than the non-user-specific assistance. This proof-of-concept demonstrated the potential for HITL controls in assisted working.

Vehicle windshield wiper system increases the driving safety by contributing a clear shot viewing to the driver. In this paper, modelling, designing and simulation of a vehicle windshield wiper system with robust control theory is done successfully. H∞ loop shaping and robust pole placement controllers are used to improve the wiping speed by tracking a reference speed signals. The reference speed signals used in this paper are step and sine wave signals. Comparison of the H∞ loop shaping and robust pole placement controllers based on the two reference signals is done and convincing results have been obtained. Finally the comparative results prove the effectiveness of the proposed H∞ Loop Shaping controller to improve the wiping mechanism for the given two reference signals.

Postural deficits such as hyperlordosis (hollow back) or hyperkyphosis (hunchback) are relevant health issues. Diagnoses depend on the experience of the examiner and are therefore often subjective and prone to errors. Machine learning (ML) methods in combination with explainable ar-tificial intelligence (XAI) tools have proven useful for providing an objective, data-based orien-tation. However, only a few works have considered posture parameters, leaving the potential of more human-friendly XAI interpretations still untouched. Therefore, the present work proposes an objective, data-driven ML system for medical decision support that enables especially human-friendly interpretations using counterfactual explanations (CFs). Posture data for 1151 subjects were recorded by means of stereophotogrammetry. An expert-based classification of the subjects regarding the presence of hyperlordosis or hyperkyphosis was initially performed. Using a Gaussian progress classifier, the models were trained and interpreted using CFs. Label errors were flagged and re-evaluated using confident learning. Very good classification performances for both hyperlordosis and hyperkyphosis were found, whereby the re-evaluation and correction of the test labels led to a significant improvement (MPRAUC = 0.97). A statistical evaluation showed that the CFs seemed to be plausible in general. In the context of personalized medicine, the present study’s approach could be of importance for reducing diagnostic errors and thereby improving the individual adaptation of therapeutic measures. Likewise, it could be a basis for the development of apps for preventive posture assessment.

The Environmental interactions contributed to the processes of settlement and development of the first settlers at southern Peru 15,000 BC. The determination of this process is based on paleoclimatic studies at southern Peru and ethnoarchaeological evidence. The determination of this process is based on paleoclimatic studies of southern Peru and ethnoarchaeological evidence; establishing as a result of this analysis the hypothesis of environmental interaction and territorial occupation of the first hunter-gatherer populations until their consolidation, dominating the geographical space from Tacna. The Disruptive disaster events and their effects on climate during the Peruvian Paleolithic resulted in the origin of local societies that shaped the Tiawanaku societies of the early horizon at Southern Peru and Northern Chile.

The classification of Trojans in modern analog microcircuits is considered. Using high-speed operational amplifiers (Op-Amps) as an example, the relationship between Op-Amp circuit design and the formation of undesirable states in typical switching circuits is shown. Circuit solutions are proposed to minimize the Trojan states of high-speed Op-Amps. These include limiting the maximum output currents of the input stages of the Op-Amp during the transient process and the use of differentiating transient correction circuits in the Op-Amp.

This is the second paper in a cycle investigating the exact solution of loop equations in decaying turbulence. We perform numerical simulations of the Euler ensemble, suggested in the previous work, as a solution to the loop equations. We designed novel algorithms for simulation, which take a small amount of computer RAM so that only the CPU time grows linearly with the size of the system and its statistics. This algorithm allows us to simulate systems with billions of discontinuity points on our fractal curve, dual to the decaying turbulence. For the vorticity correlation function, we obtain \textbf{quantum fractal laws} with regime changes between universal discrete values of indexes. The traditional description of turbulence with fractal or multifractal scaling laws does not apply here. The measured conditional probabilities of fluctuating variables are smooth functions of the logarithm of scale, with statistical errors being negligible at our large number of random samples $T = 167,772,160$ with $N = 200,000,000$ points on a fractal curve. The quantum jumps arise from the analytical distribution of scaling variable $X = \frac{\cot^2(\pi p/q)}{q^2}$ where $\frac{p}{q}$ is a random fraction. This distribution is related to the totient summatory function and is a discontinuous function of $X$. In particular, the energy spectrum is a devil's staircase with tilted uneven steps with slopes between $-1$ and $-2.03$. The logarithmic derivative of energy decay $n(t)$ as a function of time is jumping down the stairs of universal levels between $1.50$ and $1.53$. The quantitative verification of this quantization would require more precise experimental data.

For the problem of poor accuracy of the existing multi-rate simulation methods, this paper proposes a multi rate real-time simulation method based on the Norton equivalent, compared with multi-rate simulation method based on the ideal source equivalent. After the Norton equivalence of the fast subsystem and the slow subsystem, they are obtained simultaneously at the junction nodes. In order to reduce the amount of simulation calculation, the Norton equivalent circuit is obtained by incremental calculation. The data interface between the fast subsystem and the slow subsystem is realized by extrapolation method. For ensuring the real-time performance of the simulation, the method that the slow subsystem calculates ahead of the fast subsystem is given for the slow subsystem with a large amount of calculation. Finally, the AC/DC hybrid power system was simulated on the real-time simulation platform (FRTDS), and the simulation results were compared with the single-rate simulation, which verified the correctness and accuracy of the method.

In this paper, a horizontally moving suspended mass pendulum base is designed and controlled using robust control theory. H infinity optimal loop shaping with first and second order desired loop shaping function controllers are used to improve the performance of the system using Matlab/Simulink Toolbox. Comparison of the H infinity optimal loop shaping with first and second order desired loop shaping function controllers for the proposed system have been done to track the desired angular position of the pendulum using step and sine wave input signals and a promising result has been obtained succesfully.

In this paper, we use three different experimental methods (particle method, grid method and hybrid method) to model and simulate the smoke from the perspective of fluid dynamics. Through the comparison of different methods, we conclude: The particle method can avoid the numerical dissipation problem caused by grid calculation, but it also brings problems such as the distortion of the trajectory of the example. The grid method is accurate in calculation, but it is prone to numerical dissipation and loss of details. Finally, we choose the hybrid method to store the vorticity in the form of particles in vortex particles, avoiding the numerical dissipation problem caused by the use of grids, and including rich turbulence, which perfectly shows the simulation effect of smoke.

The calculation of the exact value of the square root of 2 is requested. In order to obtain its infinite value, A new concept is proposed where the accumulations of the infinitely many of finity is indicated by the change in direction which means that there is a jump from finity to infinity .The meaningless for an infinite number with a decimal point is indicated by this jump because any decimal number only have meanings within a finite range values and there is only an infinite integer quantity that can not be operated by algorithms like operations of multiplication，division,addition, and subtraction . The final result of the change in direction is two quantity where the second quantity and the first quantity extend in parallel line and never intersect and the second quantity represent the size of the first quantity. The first quantity is the infinitely great that can't be talked about anything outside of it and can compress any quantities outside of it to nothing and it is the exact value of the square root of 2 .

We argue that the problem of time is not a crucial issue inherent in the quantum picture of the universe evolution. On the minisuperspace model example with the massless scalar field, we demonstrate four approaches to the description of quantum evolution, which give similar results explicitly. The relevance of these approaches to building a quantum theory of gravity is discussed.

Semiconductors play a very important role in modern society. The improvement in performance of semiconductors is what has enabled the world to grow at such a fast pace. For decades scaling has been done through Moore’s law i.e performance improvements have been obtained due to transistor scaling where the number of transistors per unit area increase is what has contributed to the increase in performance. However, with transistor scaling reaching its limitations we need to find alternate methods to enhance silicon design to suit the computational need of modern society. To address this problem we will be looking into a few methods that enable performance scaling with a focus on analysing the most popular implementation of each in the industry.

This paper presents a study on the influence of the frequency variation of a nonlinear1 control allocation technique execution, developed by the author [1], named by Fast Control2 Allocation (FCA) for the Quadrotor Tilt-Rotor (QTR) aircraft. Then, through Software In The3 Loop (SITL) simulation, the proposed work considers the use of Gazebo, QGroundControl, and4 Matlab applications, where different frequencies of the FCA can be implemented separated in5 Matlab, always analyzing the QTR stability conditions from the virtual environment performed in6 Gazebo. TheresultsshowedthattheFCAneedsatleast200HzoffrequencyfortheQTRsafeflight7 conditions, i. e., 2 times smaller than the main control loop frequency, 400 Hz. Lower frequencies8 than this one would case instability or crashes during the QTR Operation.

Multiferroics, showing both ferroelectric and magnetic order, are promising candidates for future electronic devices. Especially, the fundamental understanding of ferroelectric switching is of key relevance for further improvements, which however is rarely reported in literature. On a prime example for a spin-driven multiferroic, LiCuVO₄, we present an extensive study of the ferroelectric order and the switching behavior as function of external electric and magnetic fields. From frequency-dependent polarization switching and using the Ishibashi-Orihara theory, we deduce the existence of ferroelectric domains and domain-walls. These have to be related to counterclockwise and clockwise spin-spirals leading to the formation of multiferroic domains. A novel measurement – multiferroic hysteresis loop – is established to analyze the electrical polarization simultaneously as a function of electrical and magnetic fields. This technique allows characterizing the complex coupling between ferroelectric and magnetic order in multiferroic LiCuVO₄.

Recent advancements in experimental and computational methods for RNA secondary structure detection have revealed the crucial role of RNA structural elements in diverse molecular processes within living cells. It has been demonstrated that the secondary structure of the entire viral genome is often responsible for performing crucial functions in the viral life cycle and also influences virus evolution. To investigate the role of viral RNA secondary structure, alongside experimental techniques, the use of bioinformatics tools is important for analyzing various secondary structure patterns, including hairpin loops, internal loops, multifurcations, external loops, bulges, stems, and pseudoknots. Here, we have introduced a Python package for analyzing RNA secondary structure elements in viral genomes, which includes the recognition of common secondary structure patterns, the generation of descriptive statistics for these structural elements, and the provision of their basic properties. We applied the developed package to analyze the secondary structures of complete viral genomes collected from the literature, aiming to gain insights into viral function and evolution. Both the package and the collection of secondary structures of viral genomes are available at http://github.com/KazanovLab/RNAsselem.

The feasibility of using full ion kinetics, instead of gyrokinetics, in simulating low-frequency Ion-Temperature-Gradient (ITG) instabilities in tokamaks has recently been demonstrated by Sturdevant et al. [Physics of Plasmas 24, 081207 (2017)]. In that work, a variational integrator was developed to integrate the full orbits of ions in toroidal geometry, which proved to be accurate in capturing both the short-time scale cyclotron motion and long time scale drift motion. The present work extends that work in three aspects. First, we implement a relatively simple full orbit integrator, the Boris integrator, and demonstrate that the accuracy of this integrator is also sufficient for simulation of ITG instabilities. Second, the equilibrium magnetic configuration is extended to general toroidal configuration specified numerically, enabling simulation of realistic equilibria reconstructed from tokamak experiments. Third, we extend that work to the nonlinear regime and investigate the nonlinear saturation of ITG instabilities. To verify the new numerical implementation of the orbit integrator and magnetic configuration, the linear electrostatic ITG frequency and growth rate are compared with those given in Sturdevant's work and good agreement is found.

The present state of research in Computational Fluid Dynamics (CFD) is marked by an ongoing process of refining numerical methods and algorithms with the goal of achieving accurate modeling and analysis of fluid flow and heat transfer phenomena. Remarkable progress has been achieved in the domains of turbulence modeling, parallel computing, and mesh generation, resulting in heightened simulation precision when it comes to capturing complex flow behaviors. Nevertheless CFD faces a significant challenge due to the time and expertise needed for meticulous simulation setup and intricate numerical techniques. To surmount this challenge, we introduce paint2sim—an innovative mobile application designed to enable on-the-fly 2D fluid simulations using a device’s camera. Seamlessly integrated with OpenLB, a high-performance Lattice Boltzmann-based library, paint2sim offers accurate simulations. The application leverages the capabilities of the Lattice Boltzmann Method (LBM) to model fluid behaviors accurately. Through a symbiotic interaction with the open-source OpenCV library, paint2sim can scan and extract hand-drawn simulation domains, affording the capability for instant simulation and visualization. Notably, paint2sim can also be regarded as a digital twin, facilitating just-in-time representation and analysis of 2D fluid systems. The implications of this technology extend significantly to both fluid dynamics education and industrial applications, effectively lowering barriers and rendering fluid simulations more accessible. Encouragingly, the outcomes of simulations conducted with paint2sim showcase promising qualitative and quantitative results. Overall, paint2sim offers a groundbreaking approach to mobile 2D fluid simulations, providing users with just-in-time visualization and accurate results, while simultaneously serving as a digital twin for fluid systems.

Blended learning, the integration of online and face-to-face instruction, has garnered attention in education. This paper aims to explore challenges in blended learning faced by students, teachers, and parents and propose mitigating strategies. The study employed qualitative research methods and involved 30 participants from St. Michael's College. Findings revealed primary challenges, including technical difficulties, time management, lack of interaction, and varying digital literacy levels. These challenges influenced engagement, communication, and student achievement. The study utilized a theoretical framework encompassing Technological Pedagogical Content Knowledge, Social Presence Theory, and Activity Theory. Strategies recommended comprise providing technical support, promoting communication and collaboration, offering professional development, and leveraging learning analytics. The study contributes to the existing literature by identifying specific challenges and proposing practical recommendations for enhancing blended learning effectiveness. Limitations include a small sample size and context-specific findings. Future research should investigate these challenges in broader settings and examine the long-term effects of the recommended strategies. Addressing blended learning challenges can empower educators, administrators, and policymakers to create supportive and effective learning environments for all stakeholders involved.

The absorption of medium-chain fatty acids (MCFA) depends on the solubility of these components in the gastric fluid. Parameters such as the total MCFA concentration, carboxyl ionization level, and carbon chain length affect the solubility of these molecules. Moreover, the enzymatic lipolysis of solubilized triacylglycerol (TAG) molecules may depend on the carbon chain length of the fatty acids (FAs) components and their positions on the glycerol backbone. This present study aimed at investigating the effect of electrolyte usually formed during the gastric digestion phase on the solubility of MCFA, and evaluating the influence of the FA carbon chain length on the lipolysis rate during the in vitro digestion simulation. The results obtained here showed that the increasing of electrolyte concentrations tend to decrease the mutual solubility of systems composed by the caproic and caprylic fatty acids + sodium chloride, sodium bicarbonate, and potassium chloride solutions. We also observed that a conventional version of the thermodynamic UNIQUAC model was able to correlate the liquid-liquid phase behavior of the electrolyte solutions. Regarding the in vitro digestion simulation, the experimental data indicated that the action of the pancreatic enzyme occurred preferentially in TAG molecules comprised of short and medium-chain fatty acids.

Computing in the cloud-edge continuum, as opposed to cloud computing, relies on high performance processing on the extreme edge of the IoT hierarchy. Hardware acceleration is a mandatory solution to achieve the performance requirements, yet it can be tightly tied to particular computation kernels, even within the same application. Vector-oriented hardware acceleration has gained renewed interest to support AI applications like convolutional networks or classification algorithms. We present a comprehensive investigation of the performance and power efficiency achievable by configurable vector acceleration subsystems, obtaining evidence of both the high potential of the proposed microarchitecture and the advantage of hardware customization in total transparency to the software program.

The use of the commercial simulator Aspen Plus® could bring an amelioration in the accuracy of the predictions of the chemical species composition in the output streams of the anaerobic digestion process, due to availability of a broad library of thermodynamic and phenomena transport properties in this commercial package. In the present investigation, the process simulation model for anaerobic digestion, which was originally developed by Rajendran et al. [1], has been modified by including a stoichiometric-equilibria reactor to calculate the extent of the ionization of the molecules present in the anaerobic digestate. The refined model offers a more accurate prediction of the composition of the biogas because it delves on the chemical equilibrium of the gaseous stream and the anaerobic digestate. Additionally, the refined model allows to assess the possibility of upgrading the gaseous stream to biomethane degree via manufacturing of ammonium bicarbonate. This processing pathway relies on the stabilization of the anaerobic digestate by means of biomass ash-based treatment. First of all, the titration of the manure digestate with the hydrochloric acid showed that a dose of 3.18 mEq/g would be required to attain the targeted pH of zero-point charge, upon addition of the sewage sludge ash in a ratio to the manure digestate of 0.6 ± 0.2 %. Secondly, the profiles of ammonia, carbon dioxide, and methane found in the biogas agree with both the pH of the treated digestate and the processes described in for the simultaneously upgrading the biogas and the production of ammonium bicarbonate. The refined Aspen Plus® model presented in this article needs to be further developed to ensure the standards are attained in all output streams of stabilized anaerobic digestate, biomethane, and isolated added-value chemical fertilizers.

In the context of the increasing migration into Germany that has taken place in recent years and German efforts to establish an inclusive school system, which enables learners from different religious, ethnic, language and social backgrounds with and without disabilities to participate, religious education has become a key topic for interdisciplinary discourse between theology, philosophy, and pedagogy in German schools. The following questions are of special interest: How can we manage diversity in inclusive classroom settings in general, and specifically: how can we do so with regard to worldview diversity? Does worldview diversity in schools exist, and if so, how can we recognize it in its plurality and complexity? How can we acknowledge different worldviews in the context of a changing inclusive school system? In this article, we would like to present the theoretical foundation, the research setting and the first findings of our ongoing pilot studies of worldview education at an inclusive German school. The experiments are part of a larger project context that is also described. The case study presented in this article, in which innovative language and machine learning technology was used for data analysis, illustrates the potential of inclusive methods and didactic concepts such as Universal Design for Learning [1], Learning in the Presence of the Other [2,3] and Reflexive Inclusion [4] for inclusive worldview education in the context of a religiously pluralized and secularized society.

In article 16 of the United Nations Convention (UN), or the United Nations Convention on the Rights of the Child (UNCRC), which is usually called the Convention on the Rights of the Child, outlines the right of every child to privacy and protection against violations of privacy related to the home. , family, communication, and their good name. Children's privacy, especially when it comes to personal data, requires strict boundaries. Current digital developments influence children's parenting and thinking patterns with potential negative impacts. Children can be targets of abuse in the digital world. Children's personal data is often used until they become independent. This research, using normative legal methods, aims to analyze regulations related to the protection of children's personal data in the digital era. Therefore, updates are needed in the laws and regulations governing children's personal data to safeguard their privacy rights in accordance with the UNCRC.

In an increasingly interconnected world, the internationalization of languages plays a pivotal role in shaping global linguistic landscapes. This qualitative study delves into the intriguing realm of Cebuano, a language with a rich cultural heritage and a vibrant community of speakers. Through a meticulous exploration of language variation, adaptation, and policy dynamics, the researcher unravels the complex interplay between Cebuano and the global linguistic tapestry. Drawing upon a comprehensive literature review and qualitative research, including in-depth interviews and focus group discussions, this paper illuminates the nuanced manifestations of Cebuano beyond its traditional borders and sheds light on its presence in diverse international settings. The findings reveal the intricate dance of language and identity, offering insights into the processes of language maintenance, shift, and revitalization. As the researcher navigates the multifaceted dimensions of Cebuano's internationalization, not only is its global significance unraveled, but also the intricate connections between language, culture, and human experience are investigated. This study not only contributes to the scholarly discourse on language dynamics but also raises compelling questions about the preservation of linguistic diversity, the power of language in shaping identities, and the role of language in fostering intercultural understanding. By embracing the kaleidoscope of Cebuano's global journey, this paper invites readers to contemplate the broader implications for language diversity, communication, and cultural preservation in an increasingly interconnected world.

During the last decades, the production systems have developed different strategies to increase their competitiveness in the global market. In a manufacturing and services systems, Lean Manufacturing has been consolidated through the correct implementation of its tools. The present paper presents a case study developed in a Food Packer company where a Simulation Model was considered as an alternative to reduce the waste time generated by the poor distribution of operations and transportation areas for a product within the factory. As a matter of fact, the company has detected problems on the layout distribution that prevents to fulfill the market demand. In addition, the principal aim was to create a simulation model to test different hypothetical scenarios and alternative designs for the layout distribution without modifying its facilities. Moreover, the implemented methodology was based on classical models of simulation projects and a compendium of the manufacturing systems optimization by simulation process used during the last ten years. Also, a mathematic model supported by the Promodel ® simulation software was developed considering the company characteristics; along with the model development, it was possible to compare the production system performance from the percentage of used locations, the percentage of resources utilization, the number of finished products, and the level of Work in Process (WIP). Finally, the verification and validation stages were performed before running the scenarios in the real production area. The results generated by the implementation of the project represent an increase of 68% in the production capacity and a reduction of 5% in the WIP. In addition, both outcomes are associated with the resources management, which were reassigned to other production areas.

The classical propositional calculus (zero-order logic, classical propositional logic), is the most fundamental two-valued logical system. In this paper we present a proof of inconsistency of the classical propositional calculus. Then, we get right away the conclusion that the metatheory of the classical propositional calculus is inconsistent.

Thermal sterilization is generally avoided for 3-D printed components because of the relatively low deformation temperatures for common thermoplastics used for material extrusion-based additive manufacturing. 3-D printing materials required for high-temperature heat sterilizable components for COVID-19 and other applications demands 3-D printers with heated beds, hot ends that can reach higher temperatures than polytetrafluoroethylene (PTFE) hot ends and heated chambers to avoid part warping and delamination. There are several high temperature printers on the market, but their high costs make them inaccessible for full home-based distributed manufacturing required during pandemic lockdowns. To allow for all these requirements to be met for under $1,000, the Cerberus – an open source three-headed self-replicating rapid prototyper (RepRap) was designed and tested with the following capabilities: i) 200^oC-capable heated bed, ii) 500^oC-capabel hot end, iii) isolated heated chamber with 1kW space heater core and iv) mains voltage chamber and bed heating for rapid start. The Cereberus successfully prints polyetherketoneketone (PEKK) and polyetherimide (PEI, ULTEM) with tensile strengths of 77.5 and 80.5 MPa, respectively. As a case study, open source face masks were 3-D printed in PEKK and shown not to warp upon widely home-accessible oven-based sterilization.

Industrial pilot projects often rely on proprietary and expensive electronic hardware to control and monitor experiments. This raises costs and retards innovation. Open-source hardware tools exist for implementing these processes individually, however, they are not easily integrated with other designs. The Broadly Reconfigurable and Expandable Automation Device (BREAD) framework provides many open-source devices which can be connected to create more complex data acquisition and control systems. This article explores the feasibility of using BREAD plug-and-play open hardware to quickly design and test monitoring and control electronics for an industrial materials processing prototype pyrolysis reactor. Generally, pilot-scale pyrolysis plants are expensive custom designed systems. The plug-and-play prototype approach is first tested by connecting it to the pyrolysis reactor and ensuring it can measure temperature and actuate heaters and a stirring motor. Next, a single circuit board system was created and tested using the designs from the BREAD prototype to reduce the number of microcontrollers required. Both open-source control systems were capable of reliably running the pyrolysis reactor continuously and the overall cost of control was reduced by more than 10X. Open-source, plug-and-play hardware provides a reliable avenue for researchers to quickly develop data acquisition and control electronics for industrial-scale experiments.

Imaginary dimensions in physics require an imaginary set of base Planck units and some negative parameter $c_n$ corresponding to the speed of light in vacuum $c$. Fresnel coefficients for the normal incidence of electromagnetic radiation on monolayer graphene introduce the second, negative fine-structure constant $\alpha_2^{-1} \approx -140.178$ as a fundamental constant of nature and this constant introduces these imaginary base Planck units along with this negative parameter $c_n \approx -3.06 \times 10^8~\text{[m/s]}$. Neutron stars and white dwarfs, considered as \emph{objects} emitting perfect black-body radiation, are conjectured to possess energy exceeding their mass-energy equivalence ratios, wherein the imaginary parts of two complex energies inaccessible for direct observation make storing excess of these energies possible. With this assumption, black holes are fundamentally uncharged; charged micro neutron stars and white dwarfs with masses lower than $5.7275 \times 10^{-10}~[\text{kg}]$ cannot be observed; and the radii of white dwarfs' cores are limited to $R_{WD} < 6.7933~G M_{WD}/c^2$, where $M_{WD}$ is a white dwarf mass. This sets the bounds on charged blackbody objects' minimum masses and maximum radii.

Personalization, mobility, artificial intelligence, corporate life transferred to the world in social media - all these elements will shape corporate social media in the near future. It is necessary to consider what features and what standards of behaviour enterprises will have to meet in order to build an image in the world of social media and adapt to the preferences and requirements of the client. Corporate social media has been created to support clients in using various services, give them the possibility of easy communication without time and place barriers. Therefore, high-quality corporate social media profiles significantly affect trust in the company and can affect its reputation. Considering that the aim of the article is to examine the impact of social media on the image of the company, various exchanges of perception of the quality of corporate social media, the risks they bring for the company and the perception of them by customers, which gives the image, were examined. The results of empirical research indicate that the secu-rity, simplicity and variety of m-banking services have a significant impact on the perceived qu-ality, which in turn has a positive impact on reputation. The author proposed a methodology based on the Kano model and customer satisfaction in order to examine the declared needs and unspecified desires and divide them into different groups with different impact on consumer satisfaction. The study took the form of an original, universal questionnaire that can be used in other similar studies. The analysis included 861 correctly completed questionnaires, and the ob-tained results were included in the management's action plans after their submission. Enterpri-ses expressed their interest that the measures taken should be reviewed after one to two years.

Sediment transport is highly sensitive to flow conditions, showing significant increase during flood events. Based on this principle, this study set out to rank flood events occurring along river Trotuș (Romania) based on the amount of transported sediment and event duration. The 77 flood events recorded from 2000 to 2017 were ranked into 4 classes: type A (4%); type B (16%), type C (14%) and type D (66%). The sediment transport specific for the 4 types of flood events was related to the flow discharge (sediment rating curve and hysteresis effect), the specific stream power and the energy expenditure of these events. More than 60% of the hysteresis loops typical for flood events were clockwise, thus singling out the channel as the main sediment source. Ca. 74% of the total sediment yield was transported at stream power values higher than the 300 Wm-2 threshold, which was exceeded in less than 1% of the investigated timeframe. The changes occurring in the sediment transport rates after major floods show that these events are significant thresholds in the hydrogeomorphic evolution of river channels.

The regional recycling of plant waste from municipal green space maintenance, private households and private gardens is traditionally carried out in partially open composting plants. In addition to climate-relevant gases, dust, germs and odours are emitted. Compared to aerobic rotting the pyrolysis at higher temperatures and/or reforming offers industrial utilisation of plant based biowaste, with additional availability of energetic by-products. A high-quality plant charcoal derived from a pilot plant is used in a one-year field trial to establish a theoretical comparability with substrates from composting. The advantages and disadvantages of composting and high-quality pyrolysis is shown for comparison, to foster further investigation in advanced technologies for production of plant charcoal aiming the sequester of biogenic Carbondioxide.

Distributed digital manufacturing offers a solution to medical supply and technology shortages during pandemics. To prepare for the next pandemic, this study reviews the state-of-the-art for open hardware designs needed in a COVID-19-like pandemic. It evaluates the readiness of the top twenty technologies requested by the Government of India. The results show that the majority of the actual medical products have had some open source development, however, only 15% of the supporting technologies that make the open source device possible are freely available. The results show there is still considerable work needed to provide open source paths for the development of all the medical hardware needed during pandemics. Five core areas of future work are discussed that include: i) technical development of a wide-range of open source solutions for all medical supplies and devices, ii) policies that protect the productivity of laboratories, makerspaces and fabrication facilities during a pandemic, as well as iii) streamlining the regulatory process, iv) developing Good-Samaritan laws to protect makers and designers of open medical hardware, as well as to compel those with knowledge that will save lives to share it, and v) requiring all citizen-funded research to be released with free and open source licenses.

The stability of the filling roof as an important bearing unit in the stope of the access stope in the filling mining method is of great significance to guarantee the safe and efficient production of the mine. Arrangement of mining approach in downward cemented filling stope is the key factor af-fecting stability of filling body roof. Based on combination of laboratory test, theoretical analysis and numerical simulation, the influence of different mining approach arrangement on stability of filling body roof is analyzed. The weak filling surface is formed between adjacent mining paths. The mechanical strength of the weak filling surface is significantly reduced by laboratory experiments. The relationship between distribution of the weak filling surface, azimuth angle and stability of filling roof is further studied by numerical simulation. The results show that the stability of the filler roof is the best when the upper and lower stratified mining approach is arranged vertically.

Objectives: The study aimed to uncover the percentages of battered women in Jordan, its causes, forms, and relationship to several social factors. Methodology: The study was conducted on a random, targeted sample of (1308) women based on social sample survey method and electronic questionnaire tool for data collection, the Descriptive statistical method and chi-square test were used to examine statistically significant differences. Results: The study found that the percentage of battered women reached 17.1% during Corona pandemic in 2020, and the increase in men's violence against women during this period of was in large and medium degrees according to the sample. Husbands were the most practicing violence against their wives at 37.5%, followed by fathers against daughters at 28.6%, and brothers against sisters at 26.8%. The causes of male violence are due to social factors represented by male domination culture, interference by family and relatives, and economic factors represented by the high cost of living, low household income and poverty. The most common forms of violence are verbal, physical, and psychological. The study found that women in southern Jordan, who are poorer and less educated, and who live in a large family, are the most abused. The study recommended activating family and community service and reform offices, solving problems of deteriorating economic situation and individual poverty, and enlightening community awareness of the dangers of domestic violence.

The increasingly used approach of combining different simulation software in testing of automated driving systems (ADS) increases the need for potential and convenient software designs. Recently developed co-simulation platforms (CSP) provide the possibility to cover the high demand on testing kilometers for ADS by combining vehicle simulation software (VSS) with traffic flow simulation software (TFSS) environments. The emphasis on the demand of testing kilometers is not enough to choose a suitable CSP. The complexity level of the used vehicle, object, sensors and environment models is essential for valid and representative simulation results. Choosing a suitable CSP raises the question of how the test procedures should be defined and constructed and what the relevant test scenarios are. Parameters of the ADS, the environments, objects, sensors in VSS as well as traffic parameters in TFSS can be used to define and generate test scenarios. In order to generate a large number of scenarios in a systematic and automated way, suitable and appropriate software designs are required. In this paper we present a software design for CSP based on the Model-View-Controller (MVC) design pattern and implementation of a complex CSP for virtual testing of ADS. Based on this design, an implementation of a CSP is presented using the VSS from IPG Automotive called CarMaker and the TFSS from PTV Group called Vissim. The results have shown that the presented CSP design and the implementation of the co-simulation can be used to generate relevant scenarios for testing of ADS.

Critical Infrastructures and associated real time Informational systems need some security protection mechanisms that will be able to detect and respond to possible attacks. For this reason, Anomaly Detection Systems (ADS), as part of a Security Information and Event Management (SIEM) system, are needed for constantly monitoring and identifying potential threats inside an Information Technology (IT) System. Typically, ADS collect information from various sources within a CI system using security sensors or agents and correlate those information so as to identify anomaly events. Such sensors though in a CI setting (factories, power plants, remote locations) may be placed in open areas and left unattended thus becoming targets themselves of security attacks. They can be tampering and malicious manipulated so that they provide false data that may lead an ADS or SIEM system to falsely comprehend the CI current security status. In this paper, we describe existing approaches on security monitoring in critical infrastructures and focus on how to collect security sensor - agent information in a secure and trusted way. We then introduce the concept of hardware assisted security sensor information collection that improve the level if trust (by hardware means) and also increase the responsiveness of the sensor. Thus, we propose a Hardware Security Token (HST) that when connected to a CI Host, it acts as a secure anchor for security agent information collection. We describe the HST functionality, its association with a host device, its expected role and its log monitoring mechanism. We also provide information on how security can be established between the Host device and the HST.Then, we introduce and describe the necessary Host components that need to be established in order to guarantee a high security level and correct HST functionality. We, also provide a realization-implementation of the HST overall concept in a FPGA SoC evaluation board and describe how the HST implementation can controlled. Finally, we provide indicative use case scenarios of how the HST can be used in practice to provide a variety of different security services beyond acting as a secure ADS sensor.

A plenty of theories on the origin of genetic codes have been proposed so far, yet all ignored its energetic relation to the biochemical system. Here, a new hypothesis is proposed, according to which ATP is at the origin of the primordial genetic code by its coevolution with the pristine biochemical system. This hypothesis aims to show how the genetic code was produced by photochemical reactions in a protocell that derived from a lipid vescile enclosing various life’s building blocks (e.g. nucleotides and peptides) . At extant cell, ATP is the only energetic product of photosynthesis, and is at the energetic heart of the biochemical systems. In the prelife vescile, ATP energetically elongated chains of both polynucleotides and polypeptides, thus providing a bridge between these molecules and eventually mediating biochemical innovation in the protocell from energy transformation to informatization. ATP was not the only one that could drive the formation of polynucleotides and polypeptides, but favored by precellular selection. The protocell innovated the photosynthesis system to produce ATP, which later has been processed efficiently and regularly with the aids of proteins and RNA/DNA. The completion of the genetic code from RNA to DNA marked the dawn of cellular life operated by Darwinian evolution. The ATP hypothesis supports the photochemical origin of life, shedding light on the formation of both photosynthetic and biochemical systems, which remains largely unknown thus far.

This paper presents various procedures for determining the optimal control law for a wing section in compressible flow. The flow regime includes subsonic as well as supersonic flows. For the evolution of the system in the Laplace plane the present method makes use of the exact unsteady aerodynamic forces in the Laplace plane once the control law is established. This is a great advantage against other results previously published, where the unsteady aerodynamics in the Laplace plane are just approximations of the curve-fitted values in the frequency domain (imaginary axis). Different control techniques are investigated like pole-placement, LQR and H-infinity norm. Among these, the H-infinity norm emerges as the optimal choice, exhibiting a norm magnitude approximately two orders of magnitude lower than the LQR case. Furthermore, the H-infinity controller demonstrates lower pole values that those of the pole placement and LQR compensator, showing the advantage of the H-infinity controller in terms of economic efficiency.

An adequate representation of the water infiltration process in the soil allows improving the efficiency in application and the uniformity in surface irrigation. The Green and Ampt model has shown a good representation of the process, and researchers from the United States Department of Agriculture (USDA) determined the values of their parameters for soils of that country, which are shown in tables or through functional relationships and this information is used as reference in several parts of the world, although there is no certainty that they are representative of the soils in Mexico. In this study, the parameters of the Green & Ampt equation were determined and evaluated in some soils of agricultural importance in Mexico. The parameters were obtained in four ways: one of them applied a methodology adapted from Brooks and Corey to quantify the wetting front capillary pressure head and used an permeameter under constant hydraulic head to determine the saturated hydraulic conductivity, and the other three consisted in taking them from three studies reported by the USDA. The values of the parameters suggested in Mexico drastically underestimated the results with relative errors (RE) in a range of -49.0 to -94.0% and the most representative were those obtained with the methodology proposed in this research with RE of -15.0 to 6.0%.

Access to nasopharyngeal swabs for sampling remain a bottleneck in some regions for COVID-19 testing. This study develops a distributed manufacturing solution using only an open source manufacturing tool chain consisting of two types of open source 3-D printing and batch UV curing, and provides a parametric fully free design of a nasopharyngeal swab. The swab was designed using parametric OpenSCAD in two components (a head with engineered break point and various handles), which has several advantages: i) minimizing print time on relatively slow SLA printers, ii) enabling the use of smaller print volume open source SLA printers, iii) reducing the amount of relatively expensive UV resin, and iv) enabling production of handle on more accessible material extrusion 3-D printers. A modular open source UV LED box was designed, fabricated for $45 and tested for batch curing. Swabs can be fabricated for $0.06-$0.12/swab. The results of the mechanical validation tests showed that the swabs could withstand greater forces than would be expected in normal clinical use. The swabs were also able to absorb a significant amounts of synthetic mucus materials and passed abrasion and handling tests. The results show the open source swab are promising candidates for clinical trials.

This study provides designs for a low-cost, easily replicable open source lab-grade digital scale that can be used as a precision balance. The design is such that it can be manufactured for use in most labs throughout the world with open source RepRap-class material extrusion-based 3-D printers for the mechanical components and readily available open source electronics including the Arduino Nano. Several versions of the design were fabricated and tested for precision and accuracy for a range of load cells. The results showed the open source scale was found to be repeatable within 0.1g with multiple load cells, with even better precision (0.01g) depending on load cell range and style. The scale tracks linearly with proprietary lab-grade scales, meeting the performance specified in the load cell data sheets, indicating that it is accurate across the range of the load cell installed. The smallest loadcell tested(100g) offers precision on the order of a commercial digital mass balance. The scale can be produced at significant cost savings compared to scales of comparable range and precision when serial capability is present. The cost savings increase significantly as the range of the scale increases and are particularly well-suited for resource-constrained medical and scientific facilities.

Efficient thermal management of modern electronics requires the use of thin films with highly anisotropic thermal conductivity. Such films enable the effective dissipation of excess heat along one direction while simultaneously providing thermal insulation along the perpendicular direction. In this study, we investigate the thermal conductivity of bilayer graphene (BLG) sheets using non-equilibrium molecular dynamics, examining both in-plane and cross-plane thermal conductivities. The in-plane thermal conductivity of 10 nm × 10 nm BLG with zigzag and armchair edges at room temperature is found to be around 204 W/m.K and 124 W/m.K, respectively. The in-plane thermal conductivity of BLG increases with sheet length. For all sizes, BLG with a zigzag edge exhibits higher thermal conductivity than that of the armchair edge, with this difference becoming more pronounced as the lengths of the sheets increase. In addition, increasing temperature from 300 K to 600 K decreases the in-plane thermal conductivity of a 10 nm× 10 nm zigzag BLG by about 34%. Similarly, the application of a 12.5% tensile strain induces a 51% reduction in its thermal conductivity compared to the strain-free values. Armchair configurations exhibit similar responses to variations in temperature and strain, but with less sensitivity. Furthermore, the cross-plane thermal conductivity of BLG at 300 K is estimated to be 0.05 W/m·K, significantly lower than the in-plane results by approximately four orders of magnitude. The cross-plane thermal conductance of BLG decreases with increasing temperatures, specifically, at 600 K, its value is almost 16% of that observed at 300 K.

The alignment of nanostructures in materials such as lyotropic liquid crystals (LLCs) templated materials has the potential to signicantly improve their performances. However, accurately characterising and quantifying the alignement of such fine structures remains very challenging. In situ small angle X-ray scattering (SAXS) and molecular dynamics were employed for the first time to understand the hexagonal LLC alignment process with magnetic nanoparticles under a magnetic field. The enhanced alignment has been illustrated from the distribution of azimuthal intensity in the samples exposed to magnetic field. Molecular dynamics simulations reveal the relationship between the imposed force of the magenetic nanoparticles under magnetic field and the force transferred to the LLC cylinders which leads to the LLC alignment. The combinational study with experimental measurement and computational simulation will enable the development and control of nanostructures in novel materials for various applications.

Objective: The stability of the flight phase in ski jumping is crucial for athletes' performance and safety. This study aims to investigate the influence of unfavorable conditions on aerodynamic characteristics and flight stability through computational fluid dynamics (CFD) numerical simulations. Methods: The ski jumper and the skis are considered as a multi-body system. A detailed three-dimensional (3D) model of this multi-body system under a commonly observed posture during flight is established. The partially averaged Navier-Stokes (PANS) turbulence model is employed, and CFD simulations are conducted to predict the aerodynamic characteristics of the multi-body system under lateral environmental wind and asymmetric postures during flight phase. The conditions of asymmetric postures include yaw rotation and roll rotation. Results: (1) Lateral environmental wind generated yaw force, yaw moment, and roll moment, which influenced the lift, drag, and pitch moment of the athlete. These forces and moments were relatively small at lower wind speeds (less than 3 m/s) and became more significant at higher wind speeds (greater than 4.5 m/s). (2) Under the influence of yaw rotation or roll rotation, the multi-body system exhibited noticeable yaw force, yaw moment, and roll moment, all showing a monotonic increasing trend. Moreover, they had a significant impact on the lift, drag, and pitch moment of the multi-body system. Conclusion: (1) The influence of unfavorable conditions is complex, resulting in significant yaw force, yaw moment, and roll moment on the multi-body system. The adverse effects of roll rotation were generally greater than those of yaw rotation. (2) The multi-body system exhibited self-stabilizing tendencies in yaw and roll. This phenomenon can provide a solution to maintain flight stability by employing appropriate yaw or (and) roll rotation angles, effectively compensating for or even eliminating the adverse effects of lateral environmental wind. (3) Understanding the mechanisms of how unfavorable conditions affect the aerodynamic characteristics and stability during flight in ski jumping can provide valuable assistance for real-time prediction and decision-making during competitions, as well as scientific guidance for training athletes stable flight control and techniques and improving their sport performance.

With the current rapid spread of COVID-19, global health systems are increasingly overburdened by the sheer number of people that need diagnosis, isolation and treatment. Shortcomings are evident across the board, from staffing, facilities for rapid and reliable testing to availability of hospital beds and key medical-grade equipment. The scale and breadth of the problem calls for an equally substantive response not only from frontline workers such as medical staff and scientists, but from skilled members of the public who have the time, facilities and knowledge to meaningfully contribute to a consolidated global response. Here, we summarise community-driven approaches based on Free and Open Source scientific and medical Hardware (FOSH) currently being developed and deployed to bolster access to personal protective equipment (PPE), patient treatment and diagnostics.

The understanding of black holes in loop quantum gravity is becoming increasingly accurate. This review focuses on the possible experimental or observational consequences of the underlying spinfoam structure of space-time. It adresses both the aspects associated with the Hawking evaporation and the ones due to the possible existence of a bounce. Finally, consequences for dark matter and gravitational waves are considered.

To improve accessibility, this article describes a static, four-legged, walker that can be constructed from materials and fasteners commonly available from hardware stores coupled by open-source 3-D printed joints. The designs are described in detail, shared under an open-source license, and fabricated with a low-cost open-source desktop 3-D printer and hand tools. The resulting device is loaded to failure to determine the maximum load that the design can safely support in both vertical and horizontal failure modes. The experimental results showed the average vertical failure load capacity was 3680±694.3N, equivalent to 375.3±70.8kg of applied weight with the fractured location at the wood dowel handlebars. The average horizontal load capacity was 315.6±49.4N, equivalent to 32.2±5.1kg. The maximum weight capacity of a user of 187.1±29.3kg was obtained, which indicates the open-source walker design can withstand the weight requirements of all genders with a 95% confidence interval that includes a safety factor of 1.8 when considering the lowest deviation weight capacity. The design has a cost at the bottom of the range of commercial walkers and reduces the mass compared to a commercial walker by 0.5kg (19% reduction). It can be concluded that this open-source walker design can aid accessibility in low-resource settings.

The aim of the research presented here is to assess the impact of depressive disorders on the potential of the labour markets in the countries of the European Union, with particular reference to the disparities between the 'old' and 'new' EU countries. The initial hypothesis of persistent inequalities in the system under study was verified by analysing the process of convergence in the burden of depressive disorders among people aged 20-54 that occurred in the EU-27 group of countries between 1990 and 2019. The study used data from the Global Burden of Disease Study 2019 (IHME, 2020), which examined the number of years lived with disability (YLD) due to depression in the working age population. The analysis showed that the high burden of the consequences of depressive disorders is particularly true for the highly developed economies of the EU-14. The results of the convergence assessment did not confirm the real effect of catching up over time with economies in a more favourable situation, and the inequalities observed at the beginning of the analysis period deepened..

Parkinson’s Disease (PD) is a neurodegenerative disorder characterized by motor and non-motor impairment with various implications on patients’ quality of life. Since currently available therapies are only symptomatic, identifying individuals with prodromal, preclinical or early-stage PD is crucial, as they would be ideal candidates for future disease-modifying therapies. Our analysis aims to develop a robust model for accurate PD detection using accelerometer data collected from PD and non-PD individuals with mild or no tremor during phone conversations. An open-access dataset comprising accelerometer recordings from 22 PD patients and 11 healthy controls (HC) was utilized. The data were pre-processed to extract relevant time, frequency and energy-related features, and a Bidirectional Long Short-Term Memory (Bi-LSTM) model with attention mechanism was employed for classification. The performance of the model was evaluated using 5-fold cross-validation, and metrics of accuracy, precision, recall, specificity, and f1-score were computed. The proposed model demonstrated high accuracy (98%), precision (99%), recall (98%), specificity (96%), and f1-score (98%) in accurately distinguishing PD patients from HC. Our findings indicate that the proposed model outperforms existing approaches and holds promise for detection of PD with subtle symptoms, like tremor, in the wild. Such symptoms can present in the early or even prodromal stage of the disease, and appropriate mobile-based applications may be a practical tool in real-life settings to alert individuals at risk to seek medical assistance or give patients feedback in monitoring their symptoms.

The terms 'open' and 'openness' are widely used across the current higher education environment particularly in the areas of repository services and scholarly communications. Open-access licensing and open-source licensing are two prevalent manifestations of open culture within higher education research environments. As theoretical ideals, open-licensing models aim at openness and academic freedom. But operating as they do within the context of global neoliberalism, to what extent are these models constructed by, sustained by, and co-opted by neoliberalism? In this paper, we interrogate the use of open-licensing within scholarly communications and within the larger societal context of neoliberalism. Through synthesis of various sources, we will examine how open access licensing models have been constrained by neoliberal or otherwise corporate agendas, how open access and open scholarship have been reframed within discourses of compliance, how open-source software models and software are co-opted by politico-economic forces, and how the language of 'openness' is widely misused in higher education and repository services circles to drive agendas that run counter to actually increasing openness. We will finish by suggesting ways to resist this trend and use open-licensing models to resist neoliberal agendas in open scholarship.

A novel educational platform called Shared Modeling and Simulation Environment (SMSE) was initiated in the ERASMUS+ “CybPhys” project. It integrates the Jupyter platform, including Ju-pyter Notebooks, for e-learning in the STEM field. A novel platform enhances e-learning by combining Moodle with Jupyter's capabilities to create virtual labs. A survey was conducted in the spring of 2023 among bachelor and master students of Chernihiv National Polytechnic Uni-versity aimed to gather feedback from students using SMSE in their e-learning process. Two student groups were involved: one of them consisted of students using SMSE in both the autumn and spring semesters and another represented the students starting with SMSE in the spring se-mester. The survey based on the adjusted Technology Acceptance Model (TAM) was conducted to understand the acceptance of this e-learning approach. A comprehensive analysis of students’ answers based on the TAM approach revealed the inside of the process of transformation of stu-dents’ perceptions during the acquisition of the SMSE platform. Our research demonstrates that SMSE effectively merges Moodle's online learning capabilities with Jupyter notebooks, provid-ing a flexible and interactive learning experience for both in-class and remote students. It pro-vides a web-based, multifunctional e-learning environment that combines a variety of tools and technologies, giving students the possibility to be involved in all sorts of teaching activities, such as lectures, exercises, simulations, etc., through the use of one single online environment.

The analysis presented is based on actual GHU energy demand. The special feature of this load is the existence of strong daily fluctuations in energy consumption, especially during the summer months. This study presents a methodology for managing such loads with the main objective of maximizing the operating efficiency of MG.

This study describes the development of an automated bag valve mask (BVM) compression system, which, during acute shortages and supply chain disruptions can serve as a temporary emergency ventilator. The resuscitation system is based on the Arduino controller with a real-time operating system installed on a largely RepRap 3-D printable parametric component-based structure. The cost of the system is under $170, which makes it affordable for replication by makers around the world. The device provides a controlled breathing mode with tidal volumes from 100 to 800 milliliters, breathing rates from 5 to 40 breaths/minute, and inspiratory-to-expiratory ratio from 1:1 to 1:4. The system is designed for reliability and scalability of measurement circuits through the use of the serial peripheral interface and has the ability to connect additional hardware due to the object-oriented algorithmic approach. Experimental results demonstrate repeatability and accuracy exceeding human capabilities in BVM-based manual ventilation. Future work is necessary to further develop and test the system to make it acceptable for deployment outside of emergencies in clinical environments, however, the nature of the design is such that desired features are relatively easy to add with the test using protocols and parametric design files provided.

Higher-order topological insulators (HOTIs) are recently discovered topological phases, possessing symmetry-protected corner states with fractional charges. An unexpected connection between these states and the seemingly unrelated phenomenon of bound states in the continuum (BICs) was recently unveiled. When nonlinearity is added to a HOTI system, a number of fundamentally important questions arise. For example, how does nonlinearity couple higher-order topological BICs with the rest of the system, including continuum states? In fact, thus far BICs in nonlinear HOTIs have remained unexplored. Here, we unveil the interplay of nonlinearity, higher-order topology, and BICs in a photonic platform. We observe topological corner states which are also BICs in a laser-written second-order topological lattice, and further demonstrate their nonlinear coupling with edge (but not bulk) modes under the proper action of both self-focusing and defocusing nonlinearities. Theoretically, we calculate the eigenvalue spectrum and analog of the Zak phase in the nonlinear regime, illustrating that a topological BIC can be actively tuned by nonlinearity in such an HOTI. Our studies are applicable to other nonlinear HOTI systems, with promising applications in emerging topology-driven devices.

The effectiveness of Fuzzy Inference Systems (FISs) in manipulating uncertainty and nonlinearity makes them a subject of significant interest for decision-making in embedded systems. Accordingly, optimizing FIS hardware improves its performance, efficiency, and capabilities, leading to a better user experience, increased productivity, and cost savings. To be compatible with the limited power budget in most embedded systems, this paper presents a framework to realize ultra-low power FIS hardware. It supports optimizations for both conventional arithmetic as well as MSDF-computing to be highly consistent with MSDF-based sensors. In MSDF-computing FIS all the processes of fuzzification, inference, and defuzzification are done on serially coming data bits. To demonstrate the efficiency of the proposed framework, we utilized Matlab, Chisel3, and Vivado to implement it from high-level descriptions of FIS to hardware synthesis. We also developed a Scala library in Chisel3 to establish a connection between these tools, bridging the gap, and facilitating design space exploration at the arithmetic level. Furthermore, we realized an FIS for the navigation of autonomous mobile robots in unknown environments. Synthesis results show the superiority of the output of our suggested design framework in terms of resource usage as well as power and energy consumption compared to the Matlab HDL code generator output.

Object detection is a popular image processing technique, widely used in numerous applications for detecting and locating objects in images or videos. While being one of the fastest algorithms for object detection, Single-Shot Multibox Detection (SSD) networks are also computationally very demanding, which limits their usage in real-time edge applications. Even though the SSD post-processing algorithm is not the most complex segment of the overall SSD object detection network, it is still computationally demanding and can become a bottleneck with respect to processing latency and power consumption, especially in edge applications with limited resources. When using hardware accelerators to accelerate backbone CNN processing, the SSD post-processing step implemented in software can become critical for high-end applications where high frame rates are required, as this paper shows. To overcome this problem, we propose Puppis, an architecture for hardware acceleration of SSD post-processing algorithm. As experiments will show, our solution will lead to an average SSD post-processing speedup of 34.42 when compared with a software implementation. Furthermore, execution of a complete SSD network will be on average 45.39 times faster than software implementation when the proposed Puppis SSD hardware accelerator is used together with some existing CNN accelerators.

The popularity of cloud computing is growing owing to its large data storage capacity and high computation power. It provides online, on-demand, scalable application solution, removes hardware and software barriers for non-specialist, rapidly integrates and deploys desired and necessary facilities, supports quick upgrading and addition of features. Users get benefitted with the selection of the appropriate cloud computing platform for their projects. Here, our paper provides a comprehensive overview of the services provided to the users by the most common cloud computing service providers. This paper could be used as a reference while selecting the best service provider based on the requirements of the projects.

Because the development of the internet of things (IoT) requires technology that transfers information between objects without human intervention, the core of IoT security will be secure authentication between devices or between devices and servers. Software-based authentication may be a security vulnerability in IoT, but hardware-based security technology can provide a strong security environment. A physical unclonable functions (PUFs) are a hardware security element suitable for lightweight applications. PUFs can generate challenge-response pairs(CRPs) that cannot be controlled or predicted by utilizing inherent physical variations that occur in the manufacturing process. In particular, pulse width memristive PUF (PWM-PUF) improves security performance by applying different write pulse widths and bank structures. Bloom filter (BF) is probabilistic data structures that answer membership queries using small memories. Bloom filter can improve search performance and reduce memory usage and are used in areas such as networking, security, big data, and IoT. In this paper, we propose a structure that applies Bloom filters based on the PWM-PUF to reduce PUF data transmission errors. The proposed structure uses two different Bloom filter types that store different information and that are located in front of and behind the PWM-PUF, improving security by removing challenges from attacker access. Simulation results show that the proposed structure decreases the data transmission error rate and reuse rate as the Bloom filter size increases, the simulation results also show that the proposed structure improves PWM-PUF security with a very small Bloom filter memory.

The paper describes a new formula for calculating the mutual inductance between a thin conical sheet inductor and a filamentary circular loop, which are coaxial. The presented formula is derived semi-analytically using the complete elliptic integrals of the first, second, and the third kind, along with the integral term which will be solved numerically. The results are validated using double and single integration methods, as well as the semi-analytical formula. The mutual inductance between a thin wall solenoid and a filamentary circular loop can be obtained using the new formula for the conical coil and circular loop. Presented formulas can be useful in various applications, such as broadband RF and wireless power transfer systems that utilize conical inductors. Overall, the paper presents a valuable contribution to the field of inductor design and can be useful in various applications involving conical inductors.

To assist firefighters and other first responders to use their existing equipment for respiration during the COVID-19 pandemic without using single-use, low-supply, masks, this study outlines an open source kit to convert a 3M-manufactured Scott Safety self-contained breathing apparatus (SCBA) into a powered air-purifying particulate respirator (PAPR). The open source PAPR can be fabricated with a low-cost 3-D printer and widely available components for less than $150, replacing commercial conversion kits saving 85% or full-fledged proprietary PAPRs saving over 90%. The parametric designs allow for adaptation to other core components and can be custom fit specifically to fire-fighter equipment, including their suspenders. The open source PAPR has controllable air flow and its design enables breathing even if the fan is disconnected or if the battery dies. The open source PAPR was tested for air flow as a function of battery life and was found to meet NIOSH air flow requirements for 4 hours, which is 300% over expected regular use.

Information is the currency of life, but the origin of prebiotic information remains a mystery. We propose transitional pathways from the cosmic building blocks of life to the complex prebiotic organic chemistry that led to the origin of information systems. The prebiotic information system, specifically the genetic code, is segregated, linear, and digital and probably appeared during biogenesis four billion years ago. In the peptide/RNA world, lipid membranes randomly encapsulated amino acids, RNA, and protein molecules, drawn from the prebiotic soup, to initiate a molecular symbiosis inside the protocells. This endosymbiosis led to the hierarchical emergence of several requisite components of the translation machine: tRNAs, aaRS, mRNAs, and ribosomes. When assembled in the right order, the translation machine created biosynthetic polypeptides, a process that transferred information from mRNAs to proteins. This was the beginning of the prebiotic information age. The molecular attraction between tRNA and amino acids led to different stages of the translation machines and the genetic code. tRNA is an ancient molecule that designed and built mRNA for storing the information of its cognate amino acid. Each mRNA strand became the storage device for the genetic information that encoded the amino acid sequences in triplet nucleotides. As information appeared in the digital languages of the codon within mRNA, and the genetic code for protein synthesis evolved, the prebiotic chemistry then became more organized and directional. The origin of the genetic code is enigmatic; herein we propose an evolutionary explanation: the demand for a wide range of specific enzymes in the peptide/RNA world was the main selective pressure for the origin of information-directed protein synthesis. We review three main concepts on the origin and evolution of the genetic code: the stereochemical theory, the coevolution theory, and the adaptive theory. These three theories are compatible with our coevolution model of the translation machines and the genetic code. We suggest biosynthetic pathways as the origin of the specific translation machines which provided the framework for the origin of the genetic code. During translation, the genetic code developed in three stages coincident with the refinement of the translation machines: GNC code developed by the pre-tRNA/pre-aaRS /pre-mRNA machine, SNS code by the tRNA/aaRS/mRNA machine, and finally the universal genetic code by the tRNA/aaRS/mRNA/ribosome machine. Our hypothesis provides the logical and incremental steps for the origin of the programmed protein synthesis. In order to understand the prebiotic information system better, we converted letter codons into numerical codons in the Universal Genetic Code Table. We have developed a software called CATI (Codon-Amino Acid-Translator-Imitator) to translate randomly chosen numerical codons into corresponding amino acids and vice versa. This conversion has granted us insight into how the translation might have worked in the peptide/RNA world. There is great potential in the application of numerical codons to bioinformatics such as barcoding, DNA mining, or DNA fingerprinting. We constructed the likely biochemical pathways for the origin of translation and the genetic code using the Model-View-Controller (MVC) software framework, and the translation machinery step-by-step. Using AnyLogic software we were able to simulate and visualize the entire evolution of the translation machines and the genetic code. The results indicate that the emergence of the information age from the peptide/RNA world was a watershed event in the origin of life about four billion years ago.

Walking of humanoid robots is dependent on precise tracking of the center of gravity and foot trajectories. Trajectory tracking is achieved by mobilizing the robot joints to produce the correct trajectory. Errors are being occurred because of assumptions on tracking the center of gravity and the foot trajectories. In this study, a numerical algorithm has been developed that produces an exact and single kinematic solution in which the center of gravity and foot trajectories can be tracked with the desired precision. The effectiveness of the algorithm was examined with a dynamic simulation and compared with the method given in the literature The main highlight of this study, using the presented algorithm, the robot can walk even if the position of its center of gravity is lower than its hips, resulting tracking error was smaller than reported in the literature.

The amendment or removal of superfluous government support policies is typically difficult, yet in the ever more important debate on low-carbon (i.e. clean) marine energy policy under the international law of climate action, the law of the sea, and international investment protection, there are additional dimensions of legal or economic peril. Coastal states enact policies subsidising clean energy investments, such as offshore wind energy generation, in their exclusive economic zones or continental shelves. Investors are attracted to the prospect that policies granting subsidies for ostensibly new industries are sufficiently durable. Are such subsidy policies salient or stale? In principle, the purpose of regulatory policy is the promotion of social welfare, and hence there is an optimal incidence, magnitude, and duration of the subsidy, in essence, an ideal strategy for starting, altering, or exiting such policy. We aim to introduce the concept of optimisation to the design and implementation of regulatory policy in this context. Our contribution is to offer three maxims of optimal clean marine energy law and policy: the efficiency and equity of alternative regulatory arrangements; the continuous optimisation of such arrangements; and the recognition of linguistic entanglements in the law. We test these maxims against the case of clean marine energy policy on offshore wind energy generation. One legal implication for international investment protection is that coastal states should establish a policy exit clause in their investment contracts. Our analysis of policy optimisation is generalisable across policies supporting the transition to sustainable energy forms.

The Late Heavy Bombardment Period (4.1 to 3.8 billion years ago) of heightened impact cratering activity on young Earth is likely the driving force for the origin of life. During the Eoarchean, asteroids such as carbonaceous chondrites delivered the building blocks of life and water to early Earth. Asteroid collisions created innumerable hydrothermal crater lakes in the Eoarchean crust which inadvertently became the perfect cradle for prebiotic chemistry. These hydrothermal crater lakes were filled with cosmic water and the building blocks of life. forming a thick prebiotic soup. The unique combination of exogenous delivery of extraterrestrial building blocks of life, and the endogenous biosynthesis in hydrothermal impact crater lakes very likely gave rise to life. A new symbiotic model for the origin of life within the hydrothermal crater lakes is here proposed. In this scenario, life arose around four billion years ago through five hierarchical stages of increasing molecular complexity: cosmic, geologic, chemical, information, and biological. During the prebiotic synthesis, membranes first appeared in the hydrothermal crater lakes, followed by the simultaneous origin of RNA and protein molecules, creating the RNA/protein world. These proteins were noncoded protein enzymes that facilitated chemical reactions. RNA molecules formed in the hydrothermal crater basin by polymerization of the nucleotides on the montmorillonite mineral substrate. Similarly, the initial synthesis of abiotic protein enzymes was mediated by the condensation of amino acids on pyrite surfaces. The regular wet-dry cycles within the crater lakes assisted further concentration, condensation, and polymerization of the RNAs and proteins. Lipid membranes randomly encapsulated amino acids, RNA, and protein molecules from the prebiotic soup to initiate a molecular symbiosis inside the protocells, this led to the hierarchical emergence of several cell components. As the role of protein enzymes became essential for catalytic process in the RNA/protein world, Darwinian selection from noncoded to coded protein synthesis led to translation systems and the genetic code, heralding the information stage. In this stage, the biochemical pathways suggest the successive emergence of translation machineries such as tRNAs, aaRS, mRNAs, and of ribosomes for protein synthesis. The molecular attraction between tRNA and amino acid led to the emergence of translation machinery and the genetic code. tRNA is an ancient molecule that created mRNA for the purpose of storing amino acid information like a digital strip. Each mRNA strand became the storage device for genetic information that encoded the amino acid sequences in triplet nucleotides. As information became available in the digital languages of the codon within mRNA, biosynthesis became less random and more organized and directional. The original translation machinery was simpler before the emergence of the ribosome than that of today. We review three main concepts on the origin and evolution of the genetic code: the stereochemical theory, the coevolution theory, and adaptive theory. We believe that these three theories are not mutually exclusive, but are compatible with our coevolution model of translations machines and the genetic code. We suggest biosynthetic pathways as the origin of the translation machine that provided the framework for the origin of the genetic code. During translation, the genetic code developed in three stages coincident with the refinement of the translation machinery: GNC code with four codons and four amino acids during interactions of pre-tRNA/pre-aaRS /pre-mRNA, SNS code consisting of 16 codons and 10 amino acids appeared during the tRNA/aaRS/mRNA interaction, and finally the universal genetic code evolved with the emergence of the tRNA/aaRS/mRNA/ribosome machine. The universal code consists of 64 codons and 20 amino acids, with a redundancy that minimizes errors in translation. To address the question of the origin of the biological information system in the RNA/protein world, we converted letter codons into numerical codons in the Universal Genetic Code Table. We developed a software called CATI (Codon-Amino Acid-Translator-Imitator) to translate randomly chosen numerical codons into corresponding amino acids and vice versa, gaining insight into how translation might have worked in the RNA/protein world. We simulated the likely biochemical pathways for the origin of translation and the genetic code using the Model-View-Controller (MVC) software framework, and the translation machinery step-by-step. We used AnyLogic software to simulate and visualize the evolution of the translation machines and the genetic code. We conclude that the emergence of the information age from the RNA/protein world was a watershed event in the origin of life about four billion years ago.

Based on the multiple coordination framework of “promising government-effective market-ordered society”, this paper takes 68 cases of adding elevators to old buildings as samples, and selects six conditional variables: approval optimization, financial subsidies, financing innovation, technological innovation, capable people leading and neighborhood committee guidance. Using Crisp-Set Qualitative Comparative Analysis (csQCA), this paper discusses the combination of conditions that affect the success or failure. It is found that: approval optimization and neighborhood committee guidance are sufficient conditions for the success; successful cases can be divided into three types: “political and social dual-drive type”, “market and social dual-drive type” and “ternary co-drive type”; lack of approval optimization, lack of financing innovation, and the existence of capable people leading are necessary conditions for the failure. The failure cases can be divided into “government and market double failure type” and “market failure type”.

An all-dielectric metasurface composed of orthogonal-slit silicon disks is proposed in this study. By modifying the unit structure of the metasurface with the bound states in the continuum (BIC) theory, a sharp Fano resonance can be generated. The resonance properties of the metasurface are investigated by analyzing the effects of the structural parameters on the resonance using the eigenmode analysis method. The Q factor and the resonance wavelength can be adjusted by varying the slit width, the disk thickness, and the disk radius. The electromagnetic characteristics and mechanism of the toroidal dipole-BIC (TD-BIC) are explored in depth through an analysis of the multipole expansion of the scattered power, along with the electromagnetic field and the current distribution at resonance. This research provides a novel approach for excitation of a strong TD-BIC resonance and proposes potential applications in optical switches, high-sensitivity optical sensors, and related areas.

Background. In the last decade, it was concluded that glaucomatous optic neuropathy is part of the neurodegenerative diseases in which destructive neuronal lesions are located not only in the structure of the retina, but they are also present at the level of the central visual and nervous pathways. Patients with Primitive Open Angle Glaucoma may have experienced changes such as sensorineural hearing loss as well as balance changes. The purpose of this study is to evaluate the degree of involvement of the auditory system in patients with glaucoma, the structural changes in the optic nerve and, to establish correlation between the hearing loss and structural changes in the optic nerve. The subjects included in the study are grouped as follows: a group of patients with glaucoma that will be compared to a group of patients without glaucoma only as well as identi-fy-ing the evolution of structural changes in optic nerve to patients with glaucoma and to normal patients. Material and methods. It is a prospective, cross-sectional study on 32 eyes of 16 subjects with Primitive Open Angle Glaucoma in a study group and 24 eyes of 12 healthy subjects in con-trol group with a mean age of 62 years in both groups. Both groups underwent ophthalmo-logical, audiological and radio imaging evaluation: Pure-tone audiometry (PTA) were recorded, oph-thalmologic evaluations according to a standardized protocol and MRI cerebral examination was performed. Results: In the Study group patients, compared to the Control group, the average lev-els of the left PTA, the cup/disc (C/D) area in both eyes, the C/D ratio in both eyes are in-creased. The mean level of Retinal nerve fiber layer (RNFL) mean thickness was slightly lower in patients with glaucoma. Multivariate analysis demonstrates that gender can be a good predictor of C/D area, gender and age can be good predictors of PTA both eyes and C/D ratio in the right eye, and gender, age and background can be good predictors of disc area in the left eye. Conclu-sions: Pa-tients with Primitive Open Angle Glaucoma show changes in audiometry test in correla-tion with ophthalmological parameters demonstrating that the auditory system can be affected in Primitive Open Angle Glaucoma. This study emphasizes the problem of interdisciplinarity in medicine with the aim of ensuring the quality of life of patients with glaucoma. A good collabora-tion between ophthalmologist and otolaryngologist will be very useful for these patients.

Authors such as Schnoebelen (2012: 12) suggest that in some languages (cf. Navajo) certain dependent clauses are frequently used independently to “mark emotional evaluation and background information”. Evans (2007) uses the term insubordination to refer to this phenomenon. Our study focuses on a particular insubordinate construction introduced by the sequence ni que in Spanish, as in the example [¡Una carta cada día!] Ni que yo fuese Umbral. (CORPES 100), used as an independent clause with a sociopragmatic meaning which is different from that of its subordinate counterpart (cf. No escribiría una carta cada día ni que yo fuese Umbral). Our research questions ask about the potential for ni que to be used as a discourse marker fulfilling an expressive function when it introduces this type of construction, and the derived hypothesis is then oriented to test whether Schnoebelen's (2012) observation about insubordinate constructions applies also to this Spanish construction. In order to test this hypothesis, we performed a functional-discourse analysis of more than 2000 concordances (and their extended contexts) in Mark Davies' Corpus del Español and the Real Academia CORPES XXI. Our findings show that the insubordinate construction differs in function and meaning from its subordinate counterpart, the former fulfilling a stronger emotive function, often combined with other discourse-pragmatic functions, such as evaluation or the organization of discourse.

Drones, as mobile media of the present day, increase the operational and narrative capabilities of television and accelerate the logistics of shooting. Unmanned aerial vehicles with a camera properly steered by a pilot are able, to some extent, to replace a jimmy jib/crane and a dolly; basic technical devices, used in the studios, enabling the creation of narrative systems of pictures in film and television. Television is more and more often using drone footage to report events, broadcast live, as well as create coverage and television documentaries. In many productions the pilot of the drone simultaneously acts as the drone camera operator, which can improve the effectiveness of shooting, but also carries some risk related to flight safety. The article describes and presents in the form of processed footage the real conditional ties of a Visual Line of Sight (VLOS) flight faced by pilots filming with a drone. VLOS is a type of air operation, which requires maintaining eye contact with the drone. In many countries a drone visibility flight is legally sanctioned as VLOS Operation. An experiment was conducted to investigate the interactions between a human and a machine in airspace steered using a controller with a touchscreen. The drone pilot was considered an integral part of the drone’s flight system control Experimental data was collected with the use of a mobile eye-tracker, video cameras, surveys and pilot declarations. During the experiment, eight television drone pilot operators recaptured a model shot under the regime of VLOS flight at low altitude. They all show that both advanced and beginner pilots did not look at the UAV for over half the time of shot execution. The experiment allowed establishing two coefficients related to the effectiveness of a VLOS flight aiming at filming from the drone. The results point to clear differences in screen perception styles used by drone television pilots.. The coefficients were described in the form of mathematical formulas and their limit values were determined. The research also determines the limits of pilots’ perception, within which they are able to film with a drone. The outcomes may help to optimize the process of aerial filming with the use of a drone, carried out for television, film and other media, as well as in a simulation of such a flight for research and training. From the perspective of media science and social communication, the presented study included a technological component that can be accessed through information science, using statistical models and variable distributions. Media scholars can study the impact of the media without having to look into the metaphorical black box. Computer science opens up this possibility.

The paper proposes a new implementation of the PID algorithm in digital hardware. The proposed circuit implements an advanced PID formula, containing a non ideal derivative component, and weighting coefficients, which enable reducing influence of setpoint changes in the proportional and derivative components. The implementation operates on standard single precision (32 bit) floating-point numbers. The proposed circuit structure is optimized for cost. It uses just one arithmetic block, performing the multiply-and-add operation. The calculations are carried out in a sequential manner. The circuit was implemented in a Cyclone V FPGA device from Intel, using the Quartus Prime software. Proper operation of the circuit was verified by simulation. The proposed solution is comparable in terms of speed with other hardware implementations of the PID algorithm operating on standard single precision floating-point numbers, while being significantly cheaper. However, it outperforms by several orders of magnitude the speed of any software-based implementation, including solutions using PLCs, and CPU/MCUs. The proposed circuit structure, together with the overall regulator device concept, suit well the SoC (System on Chip), or SoPC (System on Programmable Chip) idea, i. e. a device, that contains a CPU core immersed in “FPGA fabric” - logic resources characteristic for FPGA devices.

Abstract— Flight Control System is an integrated avionics system equipped with the minimum required components for an autonomous flight. This paper focuses on the Hardware Design of the Flight Control System and presents specific details of the components and its interface. The system architecture is based on Field Programmable Gate Array and Digital Signal Processor. Employing these two processors in the flight control system would improve the Flight Control System performance in terms of fast sequential processing of high-level control algorithms. In addition to Field Programmable Gate Array and Digital Signal Processor, the flight control computer system will also make use of Global Positioning System and Micro Electro Mechanical System sensors. The project will be implemented using Altera’s System On Programmable Chip builder, currently known as Qsys – Platform Designer implemented in Quartus-II. The system employs Nios-II processor which is 32-bit soft-core embedded-processor architecture designed especially for the Altera’s family of Field Programmable Gate Array. From conceptualization to final design, this paper presents the functionality of the different modulus and complex interfaces employed in this Flight Control System.

The efficiency of data sorting algorithms is the key aspect which determines the speed of data processing and searching. The best known efficiency of sorting algorithm has been Log (N) if there are N terms. All of the well-known sorting algorithms use various techniques to sort data. The basis for most of these are comparing the data terms with each other. In this manuscript, we are introducing a new approach for sorting data. This method is postulated to have the highest efficiency ever achieved by any of the sorting algorithms. We achieve this by sorting data without comparing the data terms. Or achieving results of data comparison without comparing the terms explicitly.

This study investigates the magnetization of Cobalt (Co) nanoparticles with two different crystal structures: a centered cubic (fcc) and an hexagonal close packed (hcp), under the magnetic field of the Earth. For that reason, the hysteresis loops of the two material samples are exported and compared with the corresponding value by experimental procedure in the laboratory under the Earth’s magnetization. For both samples, the nanoparticle number variation and the nearest neighbor distance effect, in the Co hysteresis loop are investigated, structural information that is useful for the sample preparation. For the simulations the Finite Element Method (FEM) was used, while experiments are conducted using a measurement set-up based on fluxgate magnetometers. From the simulation, it is proven that, for both samples, the nanoparticle number effect does not change the hysteresis loop. In contrast, when the distance between the nanoparticles increases, the magnetization obtains smaller value. This study aims to build a novel, simple and economical measurement arrangement enabling in situ magnetic measurements for ferromagnetic nano-material characterization. As the need for continuous knowledge of the condition and the phase of ferromagnetic nanoparticles that is crucial in many applications, like catalytic processes, this work aims to introduce an alternative approach that will add another dimension to conventional chemical reaction engineering this of the magnetic state of the material resolved in time and space and to contribute in the field of the monitoring and the early fault diagnosis of nanoparticle materials.

In coastal areas around the world, seagrass meadows play a crucial ecological and economic role. A large amount of seagrass beds dominates primary production and contributes to the high secondary productivity of this ecosystem. The microbial loop (consuming bacterial biomass by grazers and using seagrass-derived detritus by bacteria) may be an important mechanism for transferring seagrass-derived organic matter to the aquatic food chain. This study aims to improve our understanding of how bacterial growth and mortality (grazing and viral lysis rates) differ in seagrass and adjacent unvegetated meadow habitats. We found that viral lysis and grazing caused similar mortality rates of bacteria in a seagrass environment during the summer. It has been found, however, that bacterial production is controlled by the availability of resources (bottom-up control) and is cycled within the bacteria-virus-DOC loop in adjacent unvegetated waters. Our study region may be affected by this shift in organic matter fate and cycling.

Functional Near Infrared Spectroscopy (fNIRS) systems for e-health applications usually suffer of poor signal detection mainly due to a low end-to-end signal to noise ratio of the electronics chain. Lock-In Amplifiers (LIA) historically represent a powerful technique helping to improve performances in such circumstances. In this work it has been designed and implemented a digital LIA system, based on a Zynq® Field Programmable Gate Array (FPGA), trying to explore if this technique might improve fNIRS system performances. More broadly, FPGA based solution flexibility has been investigated, with particular emphasis applied to digital filter parameters, needed in the digital LIA, and it has been evaluated its impact on the final signal detection and noise rejection capability. The realized architecture was a mixed solution between VHDL hardware modules and software ones, running within a softcore microprocessor. Experimental results have shown the goodness of the proposed solutions and comparative details among different implementation will be detailed. Finally a key aspect taken into account throughout the design was its modularity, allowing an ease increase of the input channels while avoiding the growth of the design cost of the electronics system.

The object of study is a transversely bent triangular plate made of orthotropic material fixed along the edges of the plate under the action of a uniformly distributed load. Fourth-order differential equilibrium equations with variable orthotropy parameters were used. The equations were approximated by finite differences for a grid of scalene triangles. This type of mesh accurately describes the boundary contour of the triangular-shaped plates. The boundary conditions for the mesh consider the orthotropy of the plate material. Seven standard finite-difference equations have been developed considering the boundary conditions along the three edges of the plate and the presence of three angles of an irregularly shaped triangle. A finite difference matrix is obtained. The matrix structure makes calculating a triangular plate at different base angles possible. The boundary conditions were varied in the form of rigid or hinged support of triangular plates. The calculation method considers the orthotropic parameters of the material in two mutually perpendicular planes. The adaptation of the numerical method to the calculation of orthotropic plates of arbitrary shape is described. Relationships are given for determining the rigidity characteristics of orthotropic materials. An algorithm for simple engineering calculation of triangular orthotropic plates is proposed, which makes it possible to perform accurate calculations in variant design.

In recent times, the process control network (PCN) of oil and gas installation has been subjected to amorphous cyber-attacks which include Denial-of-Service (DoS), Distributed-Denial-of-Service (DDoS), Man-in-the-Middle (MitM) attacks, and this may have been caused majorly by the integration of open network to Operation Technology (OT) as a result of low-cost network expansion. The connection of the OT to the internet for firmware updates, third-party support, or vendor interventions, has exposed the industry to attacks. The inability to detect these unpredictable cyber-attacks exposes the PCN and a successful attack can lead to devastating effects. This paper reviews the different forms of cyber-attacks in PCN of oil and gas installations and proposes the use of machine learning algorithms to monitor data exchanges between the sensors, controllers, processes, and the final control elements on the network so as to detect anomalies in such data exchanges. Python 3.0 Libraries, Deep-Learning Toolkit, MATLAB, and Allen Bradley RSLogic 5000 PLC Emulator software were used in the simulation of process control. The outcome of the experiments shows the reliability and functionality of the different machine-learning algorithms in detecting these anomalies with significant precise attack detections identified using a coarse tree algorithm.

Abstract This essay presents a real-world demonstration of the evidence-based science communication process, showing how it can be used to create scientific data visualizations for public audiences. Visualizing research data can be an important science communication tool. Maximizing its effectiveness has the potential to benefit millions of viewers. As with many forms of science communication, creators of such data visualizations typically rely on their own judgments and the views of the scientists providing the data to inform their science communication decision-making. But that leaves out a critical stakeholder in the communications pipeline: the intended audience. Here, we show the practical steps that our team - the Advanced Visualization Lab at the University of Illinois at Urbana-Champaign - has taken to shift towards more evidence-based practice to enhance our science communication impact. We do this using concrete examples from our work on two scientific documentary films, one on the theme of ‘solar superstorms’ and the other focusing on the black hole at the center of the Milky Way galaxy. We used audience research with each of these films to inform our strategies and designs. We describe how such research evidence informed our understanding of ‘what works and why’ with cinematic-style data visualizations for the public. We close the essay with our key ‘take home’ messages from this evidence-based science communication process.

Perception and motor interaction with physical surroundings can be analyzed by the changes in probability laws governing two possible outcomes of neuronal activity, namely the presence or absence of spikes (binary states). Perception and motor interaction with physical environment are accounted partly by the reduction in entropy within the probability distributions of binary states of neurons in distributed neural circuits, given the knowledge about the characteristics of stimuli in physical surroundings. This reduction in the total entropy of multiple pairs of circuits in networks, by an amount equal to the increase of mutual information among them, occurs as sensory information is processed successively from lower to higher cortical areas or between different areas at the same hierarchical level but belonging to different networks. The increase in mutual information is partly accounted by temporal coupling as well as synaptic connections as proposed by Bahmer and Gupta [1]. We propose that robust increases in mutual information, measuring the association between the characteristics of sensory inputs and neural circuits connectivity patterns, are partly responsible for perception and successful motor interactions with physical surroundings. It is also argued that perception from a sensory input is the result of networking of many circuits to a common circuit that primarily processes the given sensory input.

The Late Bronze Age on the territory of Southern Transurals is represented by two major archeological cultures: Srubnaya and Andronovskaya (Alakul culture and Fyodorovskaya – type). Their interaction of constitutes a special mix of material cultures which preserves common features of two independent, Srubnaya and Andronovskaya cultures, but also creates novel local material features. These cultural groups are also known to have brought to the region the technology of bronze production. This is evidenced, amongst others, by the proximity of the largest copper mining in the region, Kargaly mines Chernykh (2002). New methods to produce ceramics and to work bones were also developed, combining two traditions, coming from Srubnaya and Andronovskaya cultures respectively. Importantly, the features of these cultures are commonly encountered together in a single cultural horizon across the distribution ares. These diffusion processes took place in a vast area (more than 120,000 km²) andwere reflected in archeological micro-district of the Urshak river basin. We present here the most recent results of the scientific examination of the Late Bronze Age settlements in southern Transurals and attempt to address a peculiar cultural co-habitation of two distinct cultural groups in this region. We also discuss their synchronism based on absolute dates and elaborate on this cultural syncretism in the entire territory of the Volga-Ural region.

The first part of this paper contains a brief description of the beginnings of modern cosmology, which, the author will argue, was most likely born in the Year 1912. Some of the pieces of evidence presented here have emerged from recent research in the history of science, and are not usually shared with the general audiences in popular science books. In special, the issue of the correct formulation of the original Big Bang concept, according to the precise words of Fred Hoyle, is discussed. Too often, this point is very deficiently explained (when not just misleadingly) in most of the available generalist literature. Other frequent uses of the same words, Big Bang, as to name the initial singularity of the cosmos, and also whole cosmological models, are then addressed, as evolutions of its original meaning. Quantum and inflationary additions to the celebrated singularity theorems by Penrose, Geroch, Hawking and others led to subsequent results by Borde, Guth and Vilenkin. And corresponding corrections to the Einstein field equations have originated, in particular, R², f(R), and scalar-tensor gravities, giving rise to a plethora of new singularities. For completeness, an updated table with a classification of the same is given.

Cropland area per capita and pressure index on cropland is the important parameters measuring the social vulnerability and sustainability in the perspective of food security in a certain region in China during the historical periods. This study reconstructs the spatial distribution change of cropland area per labor/household and pressure index on cropland during the 17th-20th century by the methods of historical documents, regression analysis, pressure index model and GIS. Then it analyzed the impacting process of climate change and sustainability of cropland use during the different periods. It draws conclusions: (i) the spatial difference of labor/household density was obvious which had the same pattern as cropland distribution during the same periods, which is higher density in three agricultural areas. (ii) Cropland area per capita was relatively higher during the 17th-18th century, which were above 0.4 ha/person in majority counties and distributed homogenously. Till the 19th century and the beginning of 20th century, cropland area per capita in large amount of regions decreased below 0.2 ha/person embodying the increase of social vulnerability and unsustainability at that time. (iii) Pressure index on cropland also showed the similar spatial pattern as cropland area per capita which presented lower threshold than nowadays. During the 17th-18th century there was no pressure on cropland. While, in the 19th century and at the beginning of 20th century, two high value centers of pressure index on cropland appeared in Middle Shandong and the Jiaodong region, pressure on sustainable cropland use increased obviously and a food crisis is probably created. (iv) Higher sustainable extent of cropland use corresponds to cold period, and lower sustainable extent of cropland use corresponds to warm period in Shandong over the past 300 years. The turning point of 1680s from dry to wet attributes to the decrease of sustainable extent of cropland use in Shandong not very distinctively. More and more pressure on sustainability of cropland use finally since the beginning of 20th century would intensify the social conflict and increase the probability of social revolts.

The article studies the Venetsiansky (Hydropark) Island (the Dnipro River, Kyiv, Ukraine) landscape structure applying the genetic landscape science method and the European landscape classification (LANMAP) approach. The aim of the article is to determine the best way to study the river islands landscapes analyzing the Venetsiansky Island landscape structure by the both methods. Methodology. The genetic landscape science method consists in the next steps: 1) the island’s territory information collecting; 2) the preliminary landscape map creating; 3) field study; 4) the final landscape map creating. The LANMAP method consists on: 1) the climate study; 2) the altitude study; 3) the parent material study; 4) the land cover study. The results. The genetic landscape science method demonstrates that the Venetsiansky Island is not a landscape, but a structural part of the landscape – the tract. The LANMAP study reveals that the Venetsiansky Island is naturally homogeneous, but land cover differs. The conclusion. The both methods’ study shows that the river island cannot be the entire landscape by the natural criteria, but only the part of it. The genetic landscape science explores the landscape forming while the LANMAP reveals the current state of the landscape.

The world has been highly impacted by the COVID-19 as the virus has spread to all continents – about 200 countries in total. The latest update claims about 4,000,000 confirmed cases and about 300,000 confirmed deaths owing to the COVID-19 pandemic. This probably makes the COVID-19 as the most dangerous contagious disease in the era 2000s. Apart from massive publications on this topic, there is no available qualitative analysis that describes the dynamic spreads of the COVID-19 and its impacts on healthcare and the economy. Through the system archetypes analysis, this paper explains that the dynamic spread of the COVID-19 consists of the limits to growth and the success to successful structures. The limits to growth elucidates that more symptomatic and asymptomatic patients owing to infected droplets may be bounded by self-healing and isolated treatments. The success to successful structure explains that once the COVID-19 affects the economy through the lockdown, there will be a limited fund to support the government aids and the aggregate demand. In overall, this paper gives readers simplified holistic insights into understanding the dynamic spread of the COVID-19.

In this paper we introduce the Umbrella function and its recurrence relations. Also we provide the integral representation for the this newly defined function.

The classical Lotka-Volterra predator-prey model is globally stable and uniformly persistent. However, in real-life biosystems extinction of species due to stochastic effects is possible. In this paper, we consider the classical Lotka-Volterra predator-prey model under stochastic perturbations. For this model, using an analytical technique based on the direct Lyapunov method and a development of the ideas of R.Z. Khasminskii, we find the precise sufficient conditions for the stochastic extinction of one and both species and the precise necessary conditions for the stochastic system persistence. The stochastic extinction occurs via a process known as the stabilization by noise of the Khasminskii type, and, in order to establish the sufficient conditions for extinction, we found the conditions for the stabilization. The analytical results are illustrated by numerical simulations. {\bf Keywords:} stochastic perturbations, white noise, Ito's stochastic differential equation, the Lyapunov functions method, stability in probability, stabilization by noise, stochastic extinction, persistence.

Wearable and mobile technology has advanced in leaps and bounds in the last decade with technological advances creating a role from enhancing healthy living to monitoring and treating disease. However, the discussion about the ethical use of such commercial technology in the community, especially in minors, is lacking behind. In this paper, we first summarize the major ethical concerns that arise from the usage of commercially available wearable technology in children, with a focus on smart watches, highlighting issues around the consent process, mitigation of risk and potential confidentiality and privacy issues, as well as the potential for therapeutic misconceptions when used without medical advice. Then through a relevant thought experiment we move on to outline some further ethical concerns that are connected to the use of wearables by minors, to wit the issue of informed consent in the case of minors, forcing them to live in the spotlight, and compromising their right to an open future. We conclude with the view that mitigating potential pitfalls and enhancing the benefits of wearable technology especially for minors requires brave and comprehensive moral debates.

Recently, several research groups have reported on anomalous enhancement of the self-field critical currents, Ic(sf,T), at low temperatures in superconductor/Dirac-cone material/superconductor (S/DCM/S) junctions. Some papers attributed the enhancement to the low-energy Andreev bound states arising from winding of the electronic wave function around DCM. In this paper, Ic(sf,T) in S/DCM/S junctions have been analyzed by two approaches: modified Ambegaokar-Baratoff and ballistic Titov-Beenakker models. It is shown that the ballistic model is an inadequate tool to analyze experimental data from S/DCM/S junctions. The primary mechanism for limiting superconducting current in S/DCM/S junctions is different from the conventional view that the latter is the maximum value within the order parameter phase variation. Thus, there is a need to develop a new model for self-field critical currents in S/DCM/S systems.

This paper presents a methodology for determining the sensitivity of the main air flow directions in ventilation subnetworks to changes of aerodynamic resistance and of air density in mine workings. Formulae for determination of the sensitivity of the main subnetwork air flows by establishing the degree of dependency of the air volume stream in a given working on the variations in resistance or air density of other workings of the network have been developed. They have been implemented in the VentGraph mine ventilation network simulator. This software, widely used in Polish collieries provides an extended possibility to predict the process of ventilation, air distribution and, in the case of underground fire, also the spread of combustion gasses. The new method facilitates assessment by mine ventilation services of the stability of ventilation systems in exploitation areas and determine of the sensitivity of the main subnetwork air flow directions to changes of aerodynamic resistance and air density. Recently in some Polish collieries new longwalls are developed in seams located deeper then the bottom of the intake shaft. Such solution is called “exploitation below the level of access” or “sublevel”. The new approach may be applied to such developments to assess the potential of changes of direction and air flow rates. In addition, interpretation of the developed sensitivity indicator is presented. While analyzing air distributions for sublevel exploitation, application of current numerical models for calculations of the distribution results in tangible benefits, such as the evaluation of the safety or risk levels for such exploitation. Application of the VentGraph computer program, and particularly the module POŻAR (fire) with the newly developed options, enables an additional approach to the sensitivity indicator in evaluating air flow safety levels for the risks present during exploitation below the level of the intake shaft. The analyses performed and examples presented enabled useful conclusions in mining practice to be drawn.

This article theoretically derives the magnetic field and vector potential produced by a steady current I flowing in an arbitrary plane loop at an arbitrary point r. Numerical examples are presented to demonstrate the behavior of the magnetic field produced by loops of various shapes such as polygons, circles, ellipses, and p-norm balls. Taking the limit as the loop shrinks to a point and the current I grows to infinity so that the magnetic dipole moment m of the loop (defined as the current I times the vector area of the loop) is kept constant, the magnetic field and vector potential are theoretically shown to converge to those of an ideal point magnetic dipole m.

The human ABCG2 multidrug transporter plays a crucial role in the absorption and excretion of xeno- and endobiotics, contributes to cancer drug resistance and the development of gout. In this work we have analyzed the effects of selected variants, residing in a structurally unresolved cytoplasmic region (a.a. 354-367) of ABCG2, on the function and trafficking of this protein. A cluster of four lysines (K357-360) and the phosphorylation of a threonine (T362) residue in this region have been previously suggested to significantly affect the cellular fate of ABCG2. Here we report that the naturally occurring K360del variant in human cells increased ABCG2 plasma membrane expression and accelerated cellular trafficking. The variable alanine replacements of the neighboring lysines had no significant effect on transport function, and the apical localization of ABCG2 in polarized cells has not been altered by any of these mutations. Moreover, in contrast to previous reports, we found that the phosphorylation incompetent T362A, or the phosphorylation mimicking T362E variants in this loop, had no measurable effects on the function or expression of ABCG2. Molecular dynamics simulations indicated an increased mobility of the mutant variants with no major effects on the core structure of the protein. These results may help to decipher the potential role of this unstructured region within this transporter.