In the modern world, all manufacturers strive for the optimal design of their products. This general trend is recently also observed in the corrugated board packaging industry. Colorful prints on displays, perforations in shelf-ready-packaging and various types of ventilation holes in trays, although extremely important for ergonomic or functional reasons, weaken the strength of the box. To meet the requirements of customers and recipients, packaging manufacturers outdo each other in new ideas for the construction of their products. Often the aesthetic qualities of the product become more important than the attention to maintaining the standards of the load capacity of the packaging (which, apart from their attention-grabbing functions, are also intended to protect transported products). The particular flaps design (both top and bottom) and their influence on the strength of the box is investigated in this study. The updated analytical-numerical approach is used here to predict the strength of the packaging with various flap’s offsets. Experimental results indicated a significant decrease in the static load-bearing capacity of packaging in the case of shifted flap creases. The simulation model proposed in our previous work has been modified and updated to take into account also this effect. The results obtained by the model presented in the paper are in satisfactory agreement with the experimental data.

This paper discusses a MEMS switch that can be fabricated using low temperature (<100^oC) deposition and patterning techniques suitable for the back-end-of-the-line integration with CMOS. The resulting cross-bar switches can be used for electrostatic discharge protection, FPGA implementation, chip security assessment and lock-down, and circuit block power management. We discuss platinum and iron switch with turn-on voltages of ~ 1.8 V. In the case of the iron switches, we also show that they can be magnetized to have “memory” and stay on when turned on. Platinum switch cycling of up to 1000 times did not show any changes in their turn-on voltage and their contact resistance was unchanged. The 10-100 nm switch airgaps were formed using low temperature sputtered sacrificial polysilicon and XeF₂ etching. XeF₂ does not attack any of the metals used in CMOS enabling fabrication of cross-bar switches with any of these metals. Once activated, it takes ∿ 6 to mechanically turn on the switch that can be decreased to ~1 ns by optimizing the device structure. Interestingly, the nm-scale gaps can be used as spark gap as a fast plasma switch to discharge first followed by the activation of the MEMS switch.

We present a brief history of the construction of models of the universe, followed by calculations of quantitative characteristics of basic geometric and kinematic properties of the Standard Cosmological Model ($\Lambda$CDM). Using the Friedmann equations of uniform space, we derive equations characterizing a $\Lambda$CDM model that describes a universe corresponding to current observational data. The equations take into account the effects of radiation and ultra-relativistic neutrinos. It is shown that the universe at very early and late stages can be described to sufficient accuracy by simple formulas. Certain important moments of cosmic evolution are determined: the times when densities of the gravitational components of the universe become equal, when they contribute equally to the gravitational force, when the accelerating expansion of space begins, and several others. The dependences of different distances on redshift and the scale factor of space are derived. The distance to the sphere that expands with the speed of light (the Hubble distance), and its current and future acceleration, are found. Concepts of a horizon, second inflation, and second horizon are discussed. We consider the remote future of the universe and the opportunity, in principle, of connection with extraterrestrial civilizations.

Background: Barleria lupulina Lindl. (Hop-headed) is a small shrub, possess potent anti-inflammatory, analgesic, anti-leukemic, antitumor, anti-hyperglycemic, anti-amoebic, virucidal, diuretic, bactericidal and antibiotic properties. Methods: Cytotoxicity, bioactive assay and genetic analysis of B. lupulina were investigated in the present communication. The leaf extract was investigated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT), Neutral red uptake (NRU), DNA fragment, reactive oxygen species (ROS) generation, mitochondrial membrane potential (MMP) assay, gene expression analysis and cDNA synthesis to evaluate anti-cancerous potency using cancerous THP-1 cell lines in vitro and in vivo. Results: HPTLC analysis reveals four spots and GC-MS analysis displayed the presence of eleven bioactive compounds among which benzofuranon, hexadecanoic acid, ethyl 9,12,15-octadecatrienoate, and 3,7,11,15-tetramethyl-2-hexadecanoic acid were the most prominent compounds. The ethanolic extract showed significant cytotoxicity (P<0.5) against THP-1 cell line at a concentration of 1mg/mL. The cells were also observed for apoptosis through DNA fragmentation in B. lupulina treated cells. Conclusions: It can be concluded that if the dose range was further refined within the range of 100-1000 µg/mL there could be dose at which the entire population of the THP-1 cell line would be apoptosis induced. The extract induced ROS in the cells after 30 minutes of exposure displaying cytotoxic effects and DNA fragmentation assay.

Local binary pattern is one of the visual descriptors and can be used as a powerful feature extractor for texture classification. In this paper, a novel representation for face recognition is proposed, called it Bilateral Line Local Binary Patterns (BL-LBP). This scheme is an extension of Line Local Binary Patterns descriptors in the statistical learning subspace. The present bilateral descriptors are fused with an ensemble learning of calibrated SVM models. The performance of this scheme is evaluated using 5 standard face databases. It is found that it is robust against illumination variation, diverse facial expressions and head pose variations and its recognition accuracy reaches 98 percent, running on a mobile device with a processing speed of 63 ms per face. Results suggest that our proposed method can be very useful for the vision systems that have limited resources where the computational cost is critical.

In this paper, we study sums of finite products of Chebyshev polynomials of the first kind and Lucas polynomials and represent each of them in terms of Chebyshev polynomials of all kinds. Here the coefficients involve terminating hypergeometric functions ₂F₁ and these representations are obtained by explicit computations.

With reference to electromagnetic interaction and Abdus Salam’s strong (nuclear) gravity, 1) Square root of ‘reciprocal’ of the strong coupling constant can be considered as the strength of nuclear elementary charge. 2) ‘Reciprocal’ of the strong coupling constant can be considered as the maximum strength of nuclear binding energy. 3) In deuteron, strength of nuclear binding energy is around unity and there exists no strong interaction in between neutron and proton. $G_s\cong 3.32688\times {10}^{28}{\mathrm{m}}^3{\mathrm{kg}}^{-1}{\sec }^{-2}$ being the nuclear gravitational constant, nuclear charge radius can be shown to be, $R_0\cong \frac{2G_s{m}_p}{c^2}\cong 1.24\mathrm{fm}.$ $e_s\cong \left(\frac{G_s{m}_p^2}{\hslash c}\right)e\cong 4.716785\times {10}^{-19}\mathrm{C}$ being the nuclear elementary charge, proton magnetic moment can be shown to be, ${\mu }_p\cong \frac{e_s\hslash }{2m_p}\cong \frac{e{G}_s{m}_p}{2c}\cong 1.48694\times {10}^{-26}\mathrm{J}{.\mathrm{T}}^{-1}.$ ${\alpha }_s\cong {\left(\frac{\hslash c}{G_s{m}_p^2}\right)}^2\cong 0.1153795$ being the strong coupling constant, strong interaction range can be shown to be proportional to $\exp \left(\frac{1}{{\alpha }_s^2}\right).$ Interesting points to be noted are: An increase in the value of ${\alpha }_s$ helps in decreasing the interaction range indicating a more strongly bound nuclear system. A decrease in the value of ${\alpha }_s$ helps in increasing the interaction range indicating a more weakly bound nuclear system. From $Z\cong 30$ onwards, close to stable mass numbers, nuclear binding energy can be addressed with, ${\left(B\right)}_{A_s}\cong Z\times \left\{\left(\frac{1}{{\alpha }_s}+1\right)+\sqrt{\sqrt{30\times 31}}\right\}\left(m_n-m_p\right)c^2\approx Z\times 19.66\mathrm{MeV}.$ With further study, magnitude of the Newtonian gravitational constant can be estimated with nuclear elementary physical constants. One sample relation is, $\left(\frac{G_N}{G_s}\right)\cong \frac{1}{2}{\left(\frac{m_e}{m_p}\right)}^{10}\left[\sqrt{\frac{G_F}{\hslash c}}/\left(\frac{\hslash }{m_{e}c}\right)\right]$ where $G_N$ represents the Newtonian gravitational constant and $G_F$ represents the Fermi’s weak coupling constant. Two interesting coincidences are, ${\left(m_p/m_e\right)}^{10}\cong \exp \left(1/{\alpha }_s^2\right)$ and $2G_s{m}_e/c^2\cong \sqrt{G_F/\hslash c}.$

Computational methods are essential to support and advance nuclear technologies due to the hazards of handling and analysing highly radioactive materials such as spent nuclear fuel (SNF). However, many such methods, including those thatcan predict SNF compositions and decay heat parameters, require expensive, proprietary software, alongside significant programming experience and computational power for utilisation, severely limiting availability of data and hampering research throughput. Although some datasets are available, many are incomplete or only cover certain fuel systems for older reactor types. Research investigating new methods for SNF recycling, for example, requires compositional and decay heat data for fuel systems not covered by extant data, though analogous source data may be available. With this in mind, we have developed a simple, accessible, and flexible method for extrapolation of isotopic, elemental, and decayheat compositions for SNF at discharge and following decay storage before recycling, based on an extant dataset. This semi-empirical method uses physical and mathematical first principles and can be performed using software accessible to all researchers. This provides outputs accurate to within 1% of reference values interpolated within the range of available data for isotopic compositions, with sensible extrapolations at higher burnups beyond those reported, withoverall elemental outputs accurate to within 0.1%of expected totals. In this publication, we present the developmental methodology, some sample data, the present limitations, and options for future development and expansion of functionality.

This paper proposes a definition of fractional line integral, generalising the concept of fractional definite integral. The proposal replicates the properties of the classic definite integral, namely the fundamental theorem of integral calculus. It is based on the concept of fractional anti-derivative used to generalise the Barrow formula. To define the fractional line integrals the Gr\"unwald-Letnikov and Liouville directional derivatives are introduced and their properties described. The integral is defined first for broken line paths and afterwards to any regular curve

With the breakthrough of modernism, various efforts are undertaken to rationalize architecture and building processes using industrial principles. Few architects explore these as intensively as Walter Gropius, the founder of the Bauhaus. Even before World War One, and increasingly in the interwar years, Gropius and a number of colleagues undertake various experiments which manifest in a series of projects, essays, model houses and Siedlungen. These aim at conceptually different goals, i.e. they follow two different categories of industrial logic: first, a flexible construction kit and, second, an assembly line serial production. This article traces the genesis of these two concepts and analyses their characteristics using these early manifestations. Compared to existing literature, this article takes into account hitherto neglected primary sources as well as technological and construction history aspects—allowing for a distinction based not only on theoretical, but also technological and structural characteristics. This article shows that Gropius succeeds in formulating and exploring the two principles in theory and practice as well as drawing conclusions by the end of the 1920s. With them, he contributed significantly to the rationalization of architecture, and his principles have been picked up and developed further by numerous architects since then.

Given a quasi-definite linear functional u in the linear space of polynomials with complex coefficients let us consider the corresponding sequence of monic orthogonal polynomials (SMOP in short) (Pn)n≥0. For the Christoffel transformation u˜=(x−c)u with SMOP (P˜n)n≥0, we are interested to study the relation between u˜ and u(1)˜, where u(1) is the linear functional for the associated orthogonal polynomials of the first kind (Pn(1))n≥0 and u(1)˜=(x−c)u(1) is its Christoffel transformation. This problem is also studied for the Geronimus transformations.

Fiber reinforced thermoplastics (FRTP), which is reinforced with glass or carbon fibers, are used to improve the mechanical strength of injection-molded products. However, FRTP has problems such as the formation of weld lines, the deterioration of the appearance due to the exposure of fibers on the molded product surface, and the deterioration of the strength of molded products due to the fiber orientation in the molded products. We have designed and fabricated an injection mold capable of melt flow control and induction heating and cooling that has the functions of both heating and cooling the injection mold as well as the function of controlling the melt flow direction using a movable core pin. In this study, the above-mentioned mold was used for the molding of carbon fiber reinforced semi-aromatic polyamide. As a result, we found that increasing the heating temperature of the mold and increasing melt flow control volume contribute to the prevention of the generation of a weld line and the exposure of fibers on the molded product surface, as well as to the formation of a flat surface and increased bending strength. The relationships of these results with the carbon fiber orientation in the molded products and the crystallization of semi-aromatic polyamide were also examined in this study.

A typical vibrational spectrum in the ice phase has four separate bands: translation, libration, bending and stretching. Ice X, the final ice phase under high pressure, shows an exotic vibrational spectrum. Theoretically, an ideal crystal of ice X only has one peak at 998 cm-1 for Raman scattering and two peaks at 450 cm-1 and 1507 cm-1 for infrared absorption in this work. These three characteristic peaks are indicators of the phase transition between ice VII/VIII and ice X. Despite much experimental and theoretical work on ice X, only this study has clearly indicated these characteristic peaks in the region of the IR band. The phonon density of states shows quite different features than ice VIII, which could be verified by inelastic neutron scattering in the future. The dynamic processes of 15 vibrational normal modes are discussed and the typical hydrogen bonds are missing.

Based on the kinematic approach of the limit analysis and slip-line theories, this paper proposes a new 2D analytical model to evaluate the collapse support pressure to ensure the face stability of a circular tunnel in purely cohesive soils driven by a shield. The normality conditions, the yield criterion and the vertical soil arching effect are considered in the analytical model. Two upper bound solutions corresponding to the ratio of the cover to the diameter (C/D) are derived from considering the mechanisms based on the motion of rigid multi-blocks. Comparisons are made with existing upper and lower bound solutions published in previous articles. The results are close to the solutions of practical engineering. The failure mechanisms proposed in this study provide a better explanation for the failure process in the heading of the tunnel face.

The onset of embryonic heart beating may be regarded as the defining feature for the beginning of personal human life. Clarifying the timing of the 1^st human heartbeat, therefore, has religious, philosophical, ethical, and medicolegal implications. This article reviews the historical and contemporary sources of knowledge on the beginning of human heart activity. Special attention is given to the problem of the determination of the true age of human embryos and to the problem of visualization of the human embryonic heart activity. It is shown that historical and current textbook statements about the onset of blood circulation in man do not derive from observations on living human embryos but derive from the extrapolation of observations on animal embryos to the human species. This fact does not preclude the existence of documented observations on human embryonic heart activity: Modern diagnostic (ultrasound) and therapeutic (IVF) procedures facilitate the visualization of early embryonic heart activity in precisely dated pregnancies. Such studies showed that the human heart started its pumping action during the 4^th post-fertilization week. A small number of direct observations on the heart activity of aborted human embryos were reported since the 19^th century but did not receive much recognition by embryologists.

The extrusion of food for human and animal consumption is a unit operation that includes mixing, shearing and force to the materials related to the rheological properties of the materials in the extruder. The present work aims to study the rheological behavior of an extruded fish diet incorporating hydrolyzed protein flour processed by extrusion. The measurement was carried out online with a slit die rheometer, defining the rheological models and parameters that fit the process. During the extrusion process, the raw materials used were hydrolyzed protein meal, fish meal and cassava starch. For the results, the evaluated treatments were adjusted to the Power Law, where an increase in the shear rate decreases the viscosity of the material, corresponding to a pseudoplastic behavior. The incorporation of hydrolyzed protein flour presented a significant effect on the value of n and Klp, increasing the viscosity with the increase in the percentage of inclusion of HPH. The models obtained for the prediction of the viscosity are adjusted to the changes in shear rate, temperature and humidity of the system.

An improved anti-noise morphology vision navigation algorithm is proposed for intelligent tractor tillage in a complex agricultural field environment. Firstly, the two key steps, Guided Filtering and improved anti-noise morphology navigation line extraction, were addressed in detail. Then the experiments were carried out in order to verify the effectiveness and advancement of the presented algorithm. Finally, the optimal template and its application condition were studied for improving the image processing speed. The comparison experiment results show that the YCbCr color space has minimum time consumption, 0.094 s, compared with HSV, HIS and 2R-G-B color spaces. The Guided Filtering method can enhance the new & old soil boundary effectively than any other methods such as Tarel, Multi-scale Retinex, Wavelet-based Retinex and Homomorphic Filtering, meanwhile, has the fastest processing speed of 0.113 s. The extracted soil boundary line of the improved anti-noise morphology algorithm has best precision and speed compared with other operators such as Sobel, Roberts, Prewitt and Log. After comparing different size of image template, the optimal template with the size of 140×260 pixels can meet high precision vision navigation while the course deviation angle is not more than 7.5°. The maximum tractor speed of the optimal template and global template are 51.41 km/h and 27.47 km/h respectively which can meet real-time vision navigation requirement of the smart tractor tillage operation in the field. The experimental vision navigation results demonstrated the feasibility of the autonomous vision navigation for tractor tillage operation in the field using the new & old soil boundary line extracted by the proposed improved anti-noise morphology algorithm which has broad application prospect.

In the paper, the author discusses and computes bounds of the sine and cosine along straight lines on the complex plane.

This study is designed to assess and improve apparel sewing section efficiency and productivity throughout line balancing. Apparel industry is one of the oldest and among the most global industry, being primarily concerned with the design and production of cloth and their supply. The central process in apparel manufacturing is the joining together of components which is known as the sewing process , which is the most labour intensive type of manufacturing process .Proper utilization of resources in garment sewing section is more critical to enhance the performance of the apparel industry by reducing production cost and minimizing wastage. For effective utilization of resources in the sewing section, good line balancing is important to increase productivity and production efficiency. This research was a design to analyse and improve the assembling line in the case of Telaje garment manufacturing and sales plc. The study was first conduct observations in the production floor and start work with the selection of sewing line in the garment production process. Among the nine lines of the factory select one on the production floor and one garment ordered product known as five pocket men’s jeans trousers are selected. For this study, both qualitative and quantitative research approaches were employed. Both primary and secondary data sources are used to detail the collected relevant data to understand the current efficiency scenario of the factory. The main challenges to minimizing line efficiency and productivity with the expected performance measurement are improper utilization of resources and improper implementation of line balancing in sewing section, therefore this thesis work shows that the bottleneck process and consequence solution will be searched, and finally significantly improving the productivity by 418 unit products/ day and, hence the efficiency will increase from 28.83% to 50.04% of the line

This work focused on proposing a plan for improvement and control of the customer service process in a customer service center, based on a waiting line analysis where it describes all the elements that interact in the system and a statistical analysis of processes to define the state in which it operates. Subsequently, the simulation of processes is applied to represent the system studied, and with it, to be able to evaluate different strategies for improvement and increase in productivity. The following strategies were evaluated: correction of the instability of customer service processes, establishment of new specification limits according to the promise of value to be fulfilled to customers, human resource management, administrative technical support. Finally, with the results obtained from the simulation of the system, the improvement and productivity increase plan is planned according to the DMAMC (Define, Measure, Analyze, Improve, Control, or DMAIC) continuous improvement cycle established in six sigma

The strictness of the result of an excavation, whether mechanical or by means of explosives, is naturally conditioned by the objective, and therefore by the type of technique applied to achieve it. To attain the best results in terms of rock breakage and respect of the final profile, it’s important to evaluate the excavation specific energy and its optimization. This research focuses on evaluating the effects of different techniques on the quality of final walls in open-pit and underground operations. Different geometries and configurations can be applied to both quarrying and tunnelling blasts. The research is aimed to push contour blasts to their limits, and the main aspects are discussed in order to improve the blast parameters in the daily practice.

Marine mortar was the goal material and its multi-scale physical-chemical-mechanical characteristics were the principal interest in this study. The on-line multi-scale damage detection experiments art was designed to quantify the characteristics mathematically and graphically. The normal cylinder specimen with 70-day age was produced and investigated by dynamically global MSHCT scan and local detection of EDS, SEM and XRD. The experiments results indicated that the marine mortar offered the appreciable strength at the early age at least, although some saline minerals were generated during the preparation. The micro-interfacial behavior and the parental foci controlled the damage development of the marine mortar the performance of which was still the adjustable one by the composition optimization.

Salinity is considered as one of the most important abiotic challenges that affect crop productivity. Plant hormones, including salicylic acid (SA), are key factors in the defence signalling output triggered during plant responses against environmental stresses. We have previously reported in peach a new SA biosynthetic pathway from mandelonitrile (MD), the molecule at the hub of the cyanogenic glucoside turnover in Prunus sp. In this work, we have studied whether this new SA biosynthetic pathway is also present in plum and the possible role this pathway plays in plant plasticity under salinity, focusing on the transgenic plum line J8-1, which displays stress tolerance via an enhanced antioxidant capacity. The SA biosynthesis from MD in non-transgenic and J8-1 micropropagated plum shoots was studied by metabolomics. Then the response of J8-1 to salt stress in presence of MD or Phe (MD precursor) was assayed by measuring: chlorophyll content and fluorescence parameters, stress related hormones, levels of non-enzymatic antioxidants, the expression of two genes coding redox-related proteins, and the content of soluble nutrients. The results from in vitro assays suggest that the SA synthesis from the MD pathway demonstrated in peach is not clearly present in plum, at least under in vitro conditions. Nevertheless, in J8-1 NaCl-stressed seedlings, an increase in SA was recorded as a result of the MD treatment, suggesting that MD could be involved in the SA biosynthesis under NaCl stress conditions in plum plants. We have also shown that the plum line J8-1 was tolerant to NaCl under greenhouse conditions, and this response was somewhat different in MD-treated plants. In that regards, the MD treatment produced an increase in SA, jasmonic acid (JA) and reduced ascorbate (ASC) contents as well as in the coefficient of non-photochemical quenching (qN) and the gene expression of Non-Expressor of Pathogenesis-Related 1 (NPR1) and thioredoxin H (TrxH) under salinity conditions, suggesting a crosstalk between different signalling pathways (NPR1/Trx and SA/JA) leading to salinity tolerance in the transgenic plum line J8-1.

Prostate cancer (PCa) has become the most common tumor among males in Europe and the USA. Adoptive immunotherapy appears as a promising strategy to control the advanced stages of the disease by specific targeting the tumor, in particular through chimeric antigen receptor T (CAR-T) cell therapy. Despite the advancements of CAR-T technology in the treatment of hematological malignancies, solid tumors still represent a challenge. To overcome current limits, other cellular effectors than T lymphocytes are under study as possible candidates for CAR-engineered cancer immunotherapy. A novel approach involves the NK-92 cell line, which mediates strong cytotoxic responses against a variety of tumor cells but has no effect on non-malignant healthy counterparts. Here, we report a therapeutic approach against PCa based on engineering of NK-92 cells with a CAR recognizing the human prostate-specific membrane antigen (PSMA), which is overexpressed in prostatic neoplastic cells. Upon CAR transduction, NK-92/CAR cells acquired high and specific lytic activity against PSMA-expressing prostate cancer cells in vitro, and also underwent degranulation and produced high levels of IFN-γ in response to antigen recognition. Lethal irradiation of the effectors, a safety measure requested for the clinical application of retargeted NK-92 cells, fully abrogated replication but did not impact on phenotype and short-term functionality. PSMA-specific recognition and antitumor activity were retained in vivo, as adoptive transfer of irradiated NK-92/CAR cells in prostate cancer-bearing mice restrained tumor growth and improved survival. Anti-PSMA CAR-modified NK-92 cells represent a universal, off-the-shelf, renewable and cost-effective product endowed with relevant potentialities as a therapeutic approach for PCa immunotherapy.

Ice covering on overhead transmission lines would cause damage to transmission system and long-term power outage. Among various de-icing devices, modular multilevel converter (MMC) based DC de-icer (MMC-DDI) is recognized as a promising solution due to its excellent technical performance. Its principle feasibility has been well studied, but few literature discuss its economy or hardware optimization, thus the designed MMC-DDI for high voltage transmission lines is usually too large and too expensive for engineering applications. To fill this gap, this paper presents a quantitative analysis on the converter characteristics of MMC-DDI, and calculates the minimal converter rating and its influencing factors. It reals that, for a given de-icing requirement, the converter rating varies greatly with its AC-side voltage. Then an optimization configuration is proposed to reduce the converter rating and improve its economy. The proposed configuration is verified in a MMC-DDI for a 500kV transmission line as a case study. The result shows, in the case of outputting same de-icing characteristics, the optimized converter rating is reduced from 151 MVA to 68 MVA, and total cost of MMC-DDI is reduced by 48%. This analysis and conclusion are conductive to the optimized design of multilevel DC de-icer, then to its engineering application.

Technological advancements and innovations have profoundly changed the lives of people giving rise to smart environments, cities, and societies. As homes are the building block of cities and societies, smart homes are critical to establishing smart living and are expected to play a key role in enabling smart cities and societies. The current academic literature and commercial advancements on smart homes have mainly focused on developing and providing smart functions for homes to provide security management and facilitate the residents in their various activities such as ambiance management. Homes are much more than physical structures, buildings, appliances, operational machines, and systems. Homes are composed of families and are inherently complex phenomena underlined by humans and their relationships with each other, subject to individual, intragroup, intergroup, and intercommunity goals. There is a clear need to understand, define, consolidate existing research, and actualize the overarching roles of smart homes, the roles of smart homes that would serve the needs of future smart cities and societies. This paper introduces our data-driven parameter discovery methodology and uses it to provide, for the first time, an extensive, rather fairly comprehensive, analysis of the families and homes landscape seen through the eyes of academics and the public using over a hundred thousand research papers and nearly a million tweets. We develop a methodology using deep learning, natural language processing (NLP), and big data analytics methods and apply it to automatically discover parameters that capture a comprehensive knowledge and design space of smart families and homes comprising social, political, economic, environmental, and other dimensions. The 66 discovered parameters and the knowledge space comprising 100s of dimensions are explained by reviewing and referencing over 300 articles from the academic literature and tweets. The knowledge and parameters discovered in this paper can be used to develop a holistic understanding of matters related to families and homes facilitating the development of better, community-specific, policies, technologies, solutions, and industries for families and homes, leading to strengthening families and homes, and in turn, empowering sustainable societies across the globe.

We study the validity of quantum Fisher information (QFI) as a faithful quantum coherence and correlation quantier by drawing a comparison with subsystem's coherence measure, rst-order coherence (FOC) and the entanglement measure, Negativity to study the behavior of thermal quantum coherence and correlations in two qubit Heisenberg XXX model, placed in independently controllable magnetic eld by systematically varying the coupling parameter, magnetic eld and bath temperature for ferromagnetic and antiferromagnetic case. After carefully observing the prole of quantum coherence and correlation measures, we propose an inequality relations which shows that there may exist a quantitative relationship between QFI, Negativity and FOC in which, the equality exists at zero temperature. We identify QFI to be a more useful coherence quantier, as it quanties coherence of individual subsystems and correlations among the subsystems. On the other hand, FOC identies coherence present in the individual subsystems only. A reciprocal relationship between Negativity and FOC is also observed in dierent cases. We also observe the existence of entanglement in ferromagnetic case, in contrast to simple Heisenberg XXX model in uniform magnetic eld. We show that in the ferromagnetic case, a very small inhomogeneity in magnetic eld is capable of producing large values of thermal entanglement. This shows that the behavior of entanglement in the ferromagnetic Heisenberg system is highly unstable against inhomogeneity of magnetic elds, which is inevitably present in any solid state realization of qubits.

In the face of the upcoming 30th anniversary of econophysics, we review our contributions and other related works on the modeling of the long–range memory phenomenon in physical, economic, and other social complex systems. Our group has shown that the long–range memory phenomenon can be reproduced using various Markov processes, such as point processes, stochastic differential equations and agent–based models. Reproduced well enough to match other statistical properties of the financial markets, such as return and trading activity distributions and first–passage time distributions. Research has lead us to question whether the observed long–range memory is a result of actual long–range memory process or just a consequence of non–linearity of Markov processes. As our most recent result we discuss the long–range memory of the order flow data in the financial markets and other social systems from the perspective of the fractional Lèvy stable motion. We test widely used long-range memory estimators on discrete fractional Lèvy stable motion represented by the ARFIMA sample series. Our newly obtained results seem indicate that new estimators of self–similarity and long–range memory for analyzing systems with non–Gaussian distributions have to be developed.

Recent developments in mid-infrared (MIR) spectroscopic ellipsometry enabled by quantum cascade lasers (QCLs) resulted in a drastic improvement in signal-to-noise ratio compared to conventional thermal emitter based instrumentation. Thus, it was possible to reduce the acquisition time for high-resolution broadband ellipsometric spectra from multiple hours to less than 1 second. This opens up new possibilities for real-time in-situ ellipsometry in polymer processing. To highlight these evolving capabilities we demonstrate the benefits of a QCL based MIR ellipsometer by investigating single and multilayered polymer films. The molecular structure and reorientation of a 2.5m thin biaxially oriented polyethylene terephtalate film is monitored during a stretching process lasting 24.5 s to illustrate the perspective of ellipsometric measurements in dynamic processes. In addition, a polyethylene/ethylene vinyl alcohol/polyethylene multilayer film is investigated at continuously varying angle of incidence ( 0∘ – 50∘) in 17.2 s, highlighting an unprecedented sample throughput for the technique of varying angle spectroscopic ellipsometry in the MIR spectral range. The obtained results underline the superior spectral and temporal resolution of QCL ellipsometry and qualify this technique as suitable method for advanced in-situ monitoring in polymer processing.

Systemic lupus erythematosus (SLE) is a heterogenous autoimmune disease. While its etiology remains elusive, current understanding suggests a multifactorial process with contributions by genetic, immunologic, hormonal, and environmental factors. A hypothesis that combines several of these factors proposes that genomic elements, the L1 retrotransposons, are instrumental in SLE pathogenesis. L1 retroelements are transcriptionally activated in SLE and produce two proteins, ORF1p and ORF2p, which are immunogenic and can drive type I interferon (IFN) production by producing DNA species that activate cytosolic DNA sensors. In addition, these two proteins reside in RNA-rich macromolecular assemblies that also contain well-known SLE autoantigens like Ro60. We surmise that cells expressing L1 will exhibit all the hallmarks of cells infected by a virus, resulting in a cellular and humoral immune response similar to those in chronic viral infections. However, unlike exogenous viruses, L1 retroelements cannot be eliminated from the host genome. Hence, dysregulated L1 will cause a chronic, but perhaps episodic, challenge for the immune system. The clinical and immunological features of SLE can be largely explained by this model. Here we review the support for, and the gaps in, this hypothesis of SLE and its potential for new diagnostic, prognostic, and therapeutic options in SLE.

Background: There is lack of data on types of community first aids use and treatment given post injuries from many low-middle income countries, including India. Materials and Methods: A cross-sectional study was conducted among children up-to 18 years of age, in Ujjain district, India to understand types of first aid given and health seeking post injury. Results: A total of 1087 injuries, in 1049 children were identified in last one year, 729 (67%) received, first aid and 758 (72%) sought some healthcare. Children with burns received most (86%) first aid, while most children (84%) with road traffic accidents (RTA) sought health care. Most children (52%) sought healthcare from a private health set-up; most (65%) being transported within the golden hour; motorbikes being the most preferred (50%) mode of transport. Only 1% injured used ambulance services. Commonly reported first aid included: use of coconut oil on wounds from falls (38%) and burns (44%); antiseptic cream on wounds from RTA (31%), turmeric in falls (16%), and rubbing of metal on a bitten site (47%). Potentially harmful substances applied included lime, toothpaste, clay and mud. Conclusion: In most injuries, appropriate locally available substances, were used by the community. Our findings will help design community interventions to increase appropriate first aid in childhood injuries.

Nowadays, the wasting of resources is one of the fundamental challenges of the industrial sector. The rectangle packing problem can be very effective in this context. Practical applications of this issue in the timing and designing of the industries and businesses are very remarkable. The purpose of this issue is to arrange a set of rectangles with specific dimensions in a rectangular page with a specific width and unlimited height without overlapping. The fundamental challenge in this issue is that this is an NP-complete issue. Therefore, it is difficult to achieve the best arrangement, which has the maximum rate of resource utilization and also has a linear running time. Many algorithms have been presented to estimate a practical solution for this issue. In the past decades, the best fit method has been one of the most useful methods for this purpose. This study presents a combinatorial algorithm based on two algorithms, including the lowest front-line strategy and the best-fit algorithm. The running results indicate that the suggested algorithm performs well, despite its simplicity. The time complexity of the suggested algorithm is O(nm), in which n is the number of input rectangles and m is the number of the created front lines.

Demand responsive transport (DRT) is operated according to flexible routes, dispatch intervals, and dynamic demand, is attracting a lot of attention. The biggest characteristic of DRT service is that the vehicle routes and schedules are operated optimally based on real-time travel requests of using passengers without fixed operating schedules. Today, the smart-city era has arrived, particularly because of progress in the wireless communications technology and technology related to location information service and real-time passenger demands and requests, and services that change the vehicles’ operating schedules in real-time according to dynamic demand have attracted more attention. In this study, we analyze the effects of the DRT system to solve the first mile/last mile problem based on a proposed DRT routing algorithm considering real-time travel behavior. The algorithm is modified from the dynamic vehicle routing problem (DVRP), in which a DRT-based routing algorithm tends to minimize users’ cost and providers’ operation cost. So far, the DVRP has only been able to serve a single request per vehicle at a time. However, this needs to be extended for the purpose of DRT, wherein several passengers board a vehicle at the same time. The routing algorithm can serve multiple requests at a time and schedule picks ups, drop offs, and rides according to the requests and as calculated by the dispatch algorithm. The basic principle of routing is as follows. The DRT vehicle moves on an attractive path and picks up a passenger if boarding is requested, but it does not simply hang around as a DVRP would. In this step, if another DRT vehicle is present near another passenger, the vehicle that would minimize that passenger’s total travel time picks up the passenger. The optimal routing algorithm developed in this study is applied to the activity-based model; that is, a microscopic traffic demand estimation method is implemented through an activity-based model by using an open-source, activity-based model package called Multi-Agent Transport Simulation (MATSim). MATSim is used for the simulation, because it combines a multi-modal traffic flow simulation with a scoring model for agents, and it provides co-evolutionary algorithms that can alter agents’ daily routines. This process is applied to a type of mode choice and route choice repeatedly over several iterations until some form of user equilibrium has been reached. This study analyzed the feasibility of implementing the DRT service by analyzing the benefits for the users and cost of the operator from the effects of increasing public transportation use and providing personalized mobility service based on DRT implementation by the introduction of DRT will be analyzed according to the scale of DRT supply. Through the simulation, the DRT is expected to provide convenient, fast, and cost-effective mobility services to customers; provide an optimal vehicle scale to providers; and, ultimately, achieve a safe and efficient transportation system.

The research probes the relationship between the Minimum Support Price (MSP) price and its income impact on the farmers with different agricultural land-holdings. It examines maize crop cultivation income under three conditions if a farmer is getting crop production value at MSP, above 20% of MSP and above 40% of MSP. It then evaluates the farmers belonging to marginal, small, semi-medium, medium and large categories position in terms of poverty criteria suggested by the World bank. For analysis purposes, it uses an economic-model approach and suggest the concept of survival income for agricultural farmers. Its findings prove that marginal and small farmers require benefits beyond the MSP rate to push them above the poverty line.

A random variable X that is base b Benford will not in general be base c Benford when c is not equal to b. This paper builds on two of my earlier papers and is an attempt to cast some light on the issue of base dependence. Following some introductory material, the “Benford spectrum” of a positive random variable is introduced and known analytic results about Benford spectra are summarized. Some standard machinery for a “Benford analysis” is introduced and combined with my method of “seed functions” to yield tools to analyze the base c Benford properties of a base b Benford random variable. Examples are generated by applying these general methods to several families of Benford random variables. Berger and Hill's concept of “base-invariant significant digits” is discussed. Some potential extensions are sketched.

Metabolic pathways provide key information to achieve a better understanding of life and all its processes; this is useful information for the improvement of medicine, agronomy, pharmacy, and other similar areas. The main analysis tool used to study these pathways is based on the idea of pathway comparison, using graph data structures. Metabolic pathway comparison has been defined as a computationally complex task \cite{ay2011submap,abaka2013campways}. In previous work from 2017, two different approaches that simplify the problem of comparing pathways represented as graphs were introduced. The first algorithm consists of the transformation of a two-dimensional graph structure, representing a metabolic pathway, to a one-dimensional structure and thus aligning the corresponding data using a reduced 1 dimension string. The second algorithm consists of performing a paired analysis between reactions in pathways and thus eliminating all similarities, finally, showing these differences to the user. The suggestion is to use the information provided by these algorithms as a previous analysis to a deeper, more expensive, comparison tool use. Here we provide an extension of this work with more data and deeper analysis. These methods have shown to be an effective way to treat the problem of metabolic pathway comparison as listed in the discussion and results section. Our results show evidence of a quick, simple and effective way to resolve the described problem.

Fault line detection timely and accurately when single-phase-to-earth fault occurs in resonant grounding system is still a focus of research. This paper presents a new approach for fault detection based on data fusion and it has non-artificial setting. Firstly, the fault criterion for interphase difference energy ratio and time-frequency correlation coefficient of each line is proposed. Subsequently, the paper establish a coordinate system with the interphase difference energy ratio as X axis and the time-frequency correlation coefficient as Y axis, and it uses the Euclidean distance algorithm to get the characteristic distance of each line by fusing two-dimensional information. Finally, comparing the sound distance and the fault distance of each line to discriminate the fault line. Electromagnetic Transients Program (EMTP) simulation results and adaptability analysis have confirmed the effectiveness and reliability of the proposed scheme.

Cannabidiol (CBD) is a non-intoxicating compound extracted from Cannabis sativa, showing antidepressant-like effects in different rodent models. However, inconsistent results have been described depending on the species and the strain used to assess depressive-like behaviour. Moreover, only a few studies have investigated the effect of CBD in female rodents. Therefore, we aimed to i) investigate the effects of CBD in two different strains of mice (Swiss and C57BL/6) and in a rat model of depression based on selective breeding (Flinders Sensitive and Resistant Lines, FSL and FRL) subjected to tests predictive of antidepressant-like effects; and ii) investigate the influence of sex in the effects of CBD in both mice and rats. CBD induced an antidepressant-like effect in male Swiss but not in female Swiss or C57BL/6 mice in the tail suspension test (TST). In male FSL rats, CBD produced an antidepressant-like effect one-hour post-injection. However, in female FSL, CBD induced a bimodal effect, increasing the immobility time at one hour and decreasing it at two hours. Ketamine produced an antidepressant-like effect in male and female FSL rats at different doses. In conclusion, strain, sex, and administration time affect CBD's behavioural response to rodents exposed to tests predictive of antidepressant effects.

Acute chemical ablation of lateral line hair cells is an important tool to understand lateral line-mediated behaviors in free-swimming fish larvae and adults. However, lateral line-mediated behaviors have not been described in fish larvae prior to swim bladder inflation, possibly because single doses of ototoxin do not effectively silence lateral line function at early developmental stages. To determine if ototoxins can effectively silence the lateral line during early development, we repeatedly expose zebrafish larvae to the ototoxin neomycin during a 36-hour period from 3-4 days post-fertilization (dpf). We use simultaneous transgenic and vital dye labeling of hair cells to compare 6- hour and 12-hour repeated treatment timelines and neomycin concentrations between 0–400 µM in terms of larval survival, hair cell death, regeneration, and functional recovery. Following exposure to neomycin, we find that the emergence of newly functional hair cells outpaces cellular regeneration, likely due to the maturation of ototoxin-resistant hair cells that survive treatment. Furthermore, hair cells of 4 dpf larvae exhibit faster recovery compared to 3 dpf larvae. Our data suggest that the rapid functional maturation of ototoxin-resistant hair cells limits the effectiveness of chemical-based methods to disrupt lateral line function. Furthermore, we show that repeated neomycin treatments can continually ablate lateral line hair cells between 3–4 dpf in larval zebrafish.

There is no formal difference between particles and black holes. This formal similarity lies in the intersection of gravity and quantum theory; quantum gravity. Motivated by this similarity, `wave-black hole duality' is proposed, which requires having a proper energy-momentum tensor of spacetime itself. Such a tensor is then found as a consequence of `principle of minimum gravitational potential'; a principle that corrects the Schwarzschild metric and predicts extra periods in orbits of the planets. In search of the equation that governs changes of observables of spacetime, a novel Hamiltonian dynamics of a Pseudo-Riemannian manifold based on a vector Hamiltonian is adumbrated. The new Hamiltonian dynamics is then seen to be characterized by a new `tensor bracket' which enables one to finally find the analogue of Heisenberg equation for a `tensor observable' of spacetime.

Production of electricity using hydro-kinetic tidal turbines has many challenges that must to be overcome to ensure reliable, economic and practical solutions. Energy from flowing water is converted by a system comprising: the turbine rotor blades, a gearbox, an electrical generator, control systems, power electronics, export cables, and a connection to the electricity grid. To date these have often been modelled using simulations of independent systems, lacking bi-directional, real-time, coupling. This approach leads to critical effects being missed. Turbulence in the flow, results in large velocity fluctuations around the blades, causing rapid variation in the shaft torque and generator speed, and consequently in the voltage seen by the power electronics and consequently the export power quality. The resulting poor quality power may be unacceptable to the grid. Conversely, grid frequency and voltage changes can also cause the generator speed to change, resulting in changes to the shaft speed and torque and consequently changes to the lift and drag forces acting on the blades. Clearly, fully integrated, bi-directional, models are needed. Here we present two fully coupled models which use different approaches to model the hydrodynamics of rotor blades. The first model uses Blade Element Momentum Theory (BEMT), resulting in an efficient tool for turbine designers. The second model also uses BEMT combines this with an actuator line model of the blades coupled to an unsteady computational fluid dynamics (CFD) simulation. This simulation, implemented in OpenFOAM, uses an energy balance to compute the shaft speed. Both the BEMT and CFD models are coupled to an Open Modellica model of the electro-mechanical system. Both models have been used to simulate the performance of a 1.2m diameter, scale model, of a three bladed horizontal axis tidal turbine tested in the University of Edinburgh FloWave Ocean Energy Research Facility. The turbulent flow around the blades and the mechanical-electrical variables during the stable period of operation are analysed. Time series and tabulated average values of mechanical thrust, power, torque, and rotational speed as well as electrical variables of generator power, electromagnetic torque, voltage and current are presented for the coupled system simulation. The relationship between the mechanical and electrical variables and the results from both tidal turbine approaches are discussed. Our comparison shows that while the BEMT model provides an effective design tool (leading to slightly more conservative designs), the CFD/BEMT simulations provide more accurate predictions of the blade loads which can be especially important in assessing fatigue on the blades (though at an increased computational cost).

Background: The front-line treatment of advanced NeuroEndocrine Neoplasms (NENs) depends on clinical and pathological factors but there are no standard second-line therapies. Methods: Metastatic NENs patients were treated at the ENETS (European NeuroEndocrine Tumor Society) center of excellence of Naples (Italy), from 2014 to 2017 with second-line metronomic temozolomide, 75 mg/m2 per os “one week on/one week off”. Toxicity was graded with NCI-CTC criteria v4.0; objective responses with RECIST v1.1 and performance status (PS) according to ECOG. Results: Twenty-six consecutive patients were treated. Median age was 65.5 years. The predominant primary organs were pancreas and lung. Grading was G2 in 11 patients, G3 in 15. Eleven patients presented with PS 1 and 15 with PS 2. The median time-on-temozolomide therapy was 12.2 months (95% CI: 11.4-19.6). No G3/G4 toxicities were registered. Complete response was obtained in 1 patient, partial response in 4, stable disease in 19 (disease control rate: 92.3%), and progressive disease in 2. The median overall survival from temozolomide start was 28.3 months. PS improved in 73% of patients. Conclusions: Metronomic temozolomide is a safe and active treatment for G2 and G3 NENs. Prospective and larger trials are needed to confirm these results.

Aboriginal Australians have a fundamental human right to opportunities that lead to healthy and flourishing lives. While the impact of trauma on Aboriginal Australians is well-documented, a pervasive deficit narrative that focuses on problems and pathology persists in research and policy discourse. This narrative risks further exacerbating Aboriginal disadvantage, through a focus on ‘fixing what is wrong’ with Aboriginal Australians, and the internalising of these narratives by Aboriginal Australians. While a growing body of research adopts strength-based models, limited research has sought to explore Aboriginal flourishing. This conceptual paper seeks to contribute to a burgeoning paradigm shift in Aboriginal research, seeking to understand what can be learned from Aboriginal people who flourish, how we best determine this, and in what contexts this can be impactful. Within, we argue the case for a new approach to exploring Aboriginal wellbeing that integrates salutogenic, positive psychology concepts with complex systems theory to understand and promote Aboriginal wellbeing and flourishing, While deeper work may be required to establish the parameters of a strength-based, culturally aligned Aboriginal conceptualisation of positive psychology, we suggest the integration of Aboriginal and Western methodologies offer unique and potent means of shifting the dial on seemingly intractable problems.

This review article focuses on the current state-of-the-art in the area of cellular and molecular biotechnology for over-production of clinically relevant therapeutic and anabolic growth factors. We discuss how the currently available tools and emerging technologies can be used for the regenerative treatment of osteoarthritis (OA). Transfected protein packaging cell lines such as GP-293 cells may be used as “cellular factories” for large-scale production of therapeutic proteins and pro-anabolic growth factors, particularly in the context of cartilage regeneration. However, when irradiated with gamma or x-rays, these cells lose their capacity for replication, which actually makes them safe for use as a live cell component of intra-articular injections. This innovation is already here, in the form of TissueGene-C, a new biological drug which consists of normal allogeneic primary chondrocytes combined with transduced GP2-293 cells that overexpress the growth factor transforming growth factor β1 (TGF-β1). TissueGene-C has revolutionized the concept of cell therapy, allowing drug companies to develop live cells as biological drug delivery systems for direct intra-articular injection of growth factors whose half-lives are in the order of minutes. Therefore, in this paper, we discuss the potential for new innovations in regenerative medicine for degenerative diseases of synovial joints using mammalian protein production platforms, specifically protein packaging cell lines, for over-producing growth factors for cartilage tissue regeneration and give recent examples. Mammalian protein production platforms that incorporate protein packaging eukaryotic cell lines are superior to prokaryotic bacterial expression systems and are likely to have a significant impact on the development of new humanized biological growth factor therapies for treating focal cartilage defects and more generally for the treatment of degenerative joint diseases such as OA, especially when injected directly into the joint.

The semi-logarithmic plot of the cumulative number of cases of epidemics resembles the response of a first-order systems for a step load. This similarity was utilized to develop a first order model that can be used for extracting information about the dynamics of infectious disease epidemics. The developed model was validated using COVID-19 data of China. It was also heuristically fitted to other 13 countries. Obtained results indicated that the model can reliably forecasts the number of infected person, epidemic growth speed towards steady-state condition (process time constant, T), and time to reach steady-state condition (4T). The developed model will help public health authorities in developing more effective control strategies of epidemics.

In this work, effects of 20 transition element additives on the interfacial adhesion energy and electronic structure of Al (111)/6H-SiC (0001) interfaces have been studied by first principles method. For clean Al (111)/6H–SiC (0001) interfaces, both Si-terminated and C-terminated interfaces have covalent bond characteristics. The C-terminated interface has stronger binding energy, which is mainly due to the stronger covalent bond formed by the larger charge transfer between C and Al. The results show that the introduction of many transition elements, such as 3d transitional group Mn, Fe, Co, Ni, Cu, Zn and 4d transitional group Tc, Ru, Rh, Pd, Ag, can improve the interfacial adhesion energy of the Si-terminated Al (111)/6H-SiC (0001) interface. However, for the C-terminated Al (111)/6H-SiC (0001) interface, only the addition of Co element can improve the interfacial adhesion energy. Bader charge analysis shows that the increase of interfacial binding energy is mainly attributed to more charge transfer.

Although several carbon sequestration methods have been proposed according to theories from various disciplines, it is not known which method is the best. This study evaluated and summarized the advantage and disadvantages of several major carbon sequestration methods, including carbon capture and sequestration, ocean alkalinization, algal cultivation, and wood burial, based on the first principles, namely, sequestration scale and time, elemental stoichiometry, and energy use efficiency. This study suggested that, at present, wood burial may be a leading candidate for carbon sequestration because it can be implemented immediately on a large scale, is cost-effective and efficient, has a long sequestration time, has low technical requirements, and has a relatively low impact on agriculture. This study also discussed the implementation of wood burial from the perspective of nutrient requirements. To achieve carbon neutrality by 2050, the present study proposed a 25-year project starting in 2025 with an average sequestration rate of 3 Pg C per year, which includes burying 1.5 Pg of dead wood carbon and the creation of 9.7 × 10⁶ ha woodland.

Fish schooling implies an awareness of the swimmers for their companions. In flow mediated environments, in addition to visual cues, pressure and shear sensors on the fish body are critical for providing quantitative information that assists the quantification of proximity to other swimmers. Here we examine the distribution of sensors on the surface of an artificial swimmer so that it can optimally identify a leading group of swimmers. We employ Bayesian experimental design coupled with two-dimensional Navier Stokes equations for multiple self-propelled swimmers. The follower tracks the school using information from its own surface pressure and shear stress. We demonstrate that the optimal sensor distribution of the follower is qualitatively similar to the distribution of neuromasts on fish. Our results show that it is possible to identify accurately the center of mass and even the number of the leading swimmers using surface only information.

Liquid manipulation by photoisomerization attracts recent attentions as a new active droplet control method for micro-chemical analysis. Such a non-inverse manipulation can be realized by a use of solution liquid of surfactant that exhibits the \emph{cis}-\emph{trans} isomerization triggered by light irradiation with a specific wavelength such as ultraviolet light. Since the isomerization is accompanied by changes in fluid properties, a light irradiation on one of liquid-air interfaces of a liquid column in a tube would generate differences in the wettability accompanied between the both sides of the finite liquid column. Although this technique has been demonstrated experimentally by Muto et al. (\emph{Euro.~Phys.~J.~Special Topics}, {\bf 226}, 2016, 1199--1205), its dynamics and developments of each isomer distribution are not understood. In order to reveal the liquid-column migration phenomenon, we have performed numerical simulations of air-liquid two-phase flows and its scalar transport of the isomer, using the Volume-of-Fluid method in conjunction with the Continuum-Surface-Force model and Continuous-Species-Transfer method. We validated present results by comparison with experimental result in terms of the migration distance of the liquid column. We confirmed a termination of the liquid-column migration occurs when the \emph{cis} isomer distribution reaches the non-irradiated region. The migration speed was less dependent on the liquid-column length and was proportional to the tube diameter.

As the era of omics continues to expand, omics-based experiments have become popular in industrial biotechnology. They promise deeper biological understanding, which may be leveraged to develop novel solutions to bioprocess optimization and cell line engineering strategies. Despite this expansion, naivety about what omic data offers and how to best handle such data can challenge the extraction of actionable value. However, the value of omic experiments in biotechnology research and development can be maximized with deliberate application of omic approaches and forethought about analysis techniques. Here we describe important considerations when designing and implementing omic-based experiments, and discuss how systems biology analysis strategies can enhance efforts to obtain actionable insights in biomanufacturing.

An equation for the Fermi level of impurity isotropic semiconductors is considered when the bottom of the conduction band and the top of the valence band are at the center of the first Brillouin zone. The energy of charge carriers in the valence and conduction bands of semiconductors is considered taking into account the real positions of the top of the valence band and the bottom of the conduction band in the first Brillouin zone. A universal equation for determining the Fermi levels of impurity isotropic semiconductors is presented.

Gene electrotransfer is one of the main non-viral methods for intracellular delivery of plasmid DNA, wherein pulsed electric fields are used to transiently permeabilize the cell membrane allowing enhanced transmembrane transport. By localizing the electric field over small portions of the cell membrane using nanostructured substrates, it is possible to increase considerably the gene electrotransfer efficiency while preserving cell viability. In this study, we design an electrotransfer approach based on commercially available cell culture inserts with polyethylene-terephthalate (PET) porous substrate. We first use multiscale numerical modelling to determine the pulse parameters, substrate pore size, and other factors that are expected to result in successful gene electrotransfer. Based on numerical results we design a simple device combining an insert with substrates containing pores with 0.4 um and 1.0 um diameter, a multiwell plate, and a pair of wire electrodes. We test the device in three mammalian cell lines and obtain transfection efficiencies similar to those achieved with bulk electroporation, but with low-voltage pulses that do not require the use of expensive electroporators. Our combined theoretical and experimental analysis calls for further systematic studies that will investigate the influence of substrate pore size and porosity on gene electrotransfer efficiency and cell viability.

Snow is a vital environmental parameter and dynamically responsive to climate change, particularly in mountainous regions. Snow cover can be monitored at variable spatial scales using Earth Observation (EO) data. Long-lasting remote sensing missions enable the generation of multi-decadal time series and thus the detection of long-term trends. However, there have been few attempts to use these to model future snow cover dynamics. In this study, we therefore explore the potential of such time series to forecast the Snow Line Elevation (SLE) in the European Alps. We generate monthly SLE time series from the entire Landsat archive (1985-2021) in 43 Alpine catchments. Positive long-term SLE change rates are detected, with the highest rates (5-8 m/y) in the Western and Central Alps. We utilize this SLE dataset to implement and evaluate seven uni-variate time series modeling and forecasting approaches. The best results were achieved by Random Forests, with a Nash-Sutcliffe efficiency (NSE) of 0.79 and a Mean Absolut Error (MAE) of 258 m, Telescope (0.76, 268 m), and seasonal ARIMA (0.75, 270 m). Since the model performance varies strongly with the input data, we developed a Combined forecast based on the best performing methods in each catchment. This approach was then used to forecast the SLE for the years 2022-2029. In the majority of the catchments the shift of the forecast median SLE level retained the sign of the long-term trend. In cases where a deviating SLE dynamic is forecast a discussion based on the unique properties of the catchment and past SLE dynamics is required. In the future, we expect major improvements in our SLE forecasting efforts by including external predictor variables in a multi-variate modeling approach.

Preterm birth is a leading cause of infant morbidity and mortality in the world. In 2020, 1 in 10 infants were born prematurely in the United States. Globally, the World Health Or-ganization estimates 15 million infants are born prematurely. The efficacy of current ther-apeutic interventions for preterm birth have been called into question due to limited repli-cable success. Recent advancements in the field of nanomedicine have made it possible to utilize the vaginal administration route to effectively and locally deliver drugs to the fe-male reproductive tract. Also, studies using murine models have provided important in-sights about the cervix as a gatekeeper for pregnancy and parturition. It seems plausible that the field of reproductive biology is on the cusp of a paradigm shift in the context of treating preterm birth. The present review focuses on the complexities associated with treating the condition and novel therapeutics that have produced promising results in pre-clinical studies.

The current study sets out to develop an empirical line method (ELM) radiometric calibration framework for reducing atmospheric contributions in UAS imagery and for producing scaled remote sensing reflectance imagery. Using a MicaSense RedEdge camera flown on a custom-built octocopter, the research reported herein finds that atmospheric contributions have an important impact on UAS imagery. Data collected over the Lower Pearl River Estuary in Mississippi during five week-long missions covering a wide range of environmental conditions was used to develop and test a simplified ELM radiometric calibration framework designed specifically for the reduction of atmospheric contributions to UAS imagery in studies with limited site accessibility or data acquisition time constraints. The framework was effective in reducing atmospheric and other external contributions to UAS imagery. Unique to the proposed radiometric calibration framework is the radiance to reflectance conversion conducted externally from the calibration equations which allows for the normalization of illumination independent from the time of UAS image acquisition and from the time of calibration equations development. This paper presents the simplified ELM radiometric calibration framework that can be used as a time-effective calibration technique to reduce errors in the UAS imagery.

ABSTRACT. The immunotherapies, as a modern therapeutic approach, get an attention because of theirs’ promise to treat a large number of different medical disorders. Immunomodulation effects of low titres (10 HA/ml) of NDV (Newcastle Disease Virus) ZG1999HDS or La Sota were tested on TLT (Human macrophage cell line) bound to PBMC (Peripheral Blood Mononuclear Cells). During the immunomodulation, the amount of NO, H2O2, lysozym and induced antibacterial activity against Gram - positive bacteria (Staphylococcus aureus, MRSA, Streptococcus pyogenes, Streptococcus agalactiae and Streptococcus mutants) and against Gram - negative bacteria (Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis and Acinetobacter baumanii) were analysed. In addition, the cytokine secretion, IL-1α, IL-2, IL-4, GM-CSF, TNF-α, IFN-α and IFN-α were evaluated. Firstly, the TLT cells are activated through the NDV ZG1999HDS or La Sota binding, followed by the NO “burst” and H2O2 and lysozyme level increase. Secondly, after the binding to the TLT cells and interaction with the PBMCs, the decrease of GM-CSF, and an increase of TNF – α and IFN – γ were found. Simultaneously, the decrease of pro – inflammatory cytokine IFN-α and the differentially increase of IL-1α, IL-2 and IL-4 were recorded. During the induction of the antibacterial response, against Gram - positive bacteria (Staphylococcus aureus, MRSA, Streptococcus pyogenes, Streptococcus agalactiae and Streptococcus mutants) the effect was one third higher with NDV ZG1999HDS compared to La Sota. Antibacterial response against Gram - negative bacteria (Escherichia coli, Pseudomonas aeruginosa, Proteus mirabilis and Acinetobacter baumanii) was not so clear. In general, NDV ZG1999HDS or La Sota activated TLT cells, further bound to PBMC; the ZG1999HDS is stronger immunomodulator than La Sota.

The pulsating flow is one of the techniques which can enhance heat transfer, therefore leading to energy saving in tubular heat exchangers. This paper investigates the heat transfer and flow characteristics in a two-dimensional in-line tube bundle with the pulsating flow by a numerical method using the Ansys Fluent. Numerical simulation is performed for Reynolds number Re = 500 with different frequencies and amplitude of pulsation. Heat transfer enhancement was estimated from the central tube of the tube bundle. Pulsation velocity had an asymmetrical character with a reciprocating flow. The technique developed by the authors to obtain asymmetric pulsations was used. This technique allows simulating an asymmetric flow in heat exchangers equipped with a pulsation generation system. Increase in both the amplitude and the frequency of the pulsations has a significant effect on heat transfer enhancement. Heat transfer enhancement is mainly observed in the front and back of the cylinder. At a steady flow in these areas, heat transfer is minimal due to the weak circulation of the flow. The increase in heat transfer in the front and back of the cylinder is associated with increased velocity and additional flow mixing in these areas.

Accordingly, the present study is aimed at investigating quaternary climate changes in Binalod Heights. To identify glacial effects, Morphic indices, field evidence and effects, climatic evidence, and (laboratory) experimental analysis were employed. Determining the permanent snow line in the region was conducted using the Right Method and 65 cirques which are considered as much enriched feeding resources for the formation an ice cover in the region. The expansion of settlements in the region are lower than the permanent snow life is more accumulated than above the border of the permanent snow line. This issue indicates that refrigeration cells do not have the ability to create civil nuclear. Regarding quaternary climate changes and the gradual warming of the climate, the initial core of the City of Mashhad ranges from the center of the Kashf rood River to northeastern heights of Binalod. In addition, the existence of glacial cirques in heights as an important factor in feeding refrigerating conditions has been effective on the expansion of urbanization of Mashhad in the past time. Our new geomorphological mapping and landsystem reconstructions provide an important insight into the response of temperate Binalod glaciers to rapidly-warming climate

Background The link between age at marriage and first birth in explaining completed family size is not always direct, due to heterogeneity in circumstances, that compel individual women to marry or initiate childbearing at a particular age. We analyzed data for 1020 women aged 45-49 in 2014 of the 1965-1969 birth cohort from the 2013-14 Zambia Demographic and Health Survey (ZDHS). Methods We fitted a bivariate and multivariate multinomial logistic regression to establish the relationship between a mother’s age at first marriage and at first birth on completed family size (CFS). Chi-square test of proportions measuring differences in proportions and relative risk ratios (RRR) with confidence intervals at 95% are reported. Results Our results show that the average CFS was 6.7 (95% CI: 6.5 – 6.9) among women completing their reproductive span in 2014 with mean age at first marriage and birth being 18.3 years (95% CI: 18.0 – 18.5) and 18.9 years (95% CI: 18.7 – 19.1) respectively. Women marrying at younger ages and having their first birth at younger ages were more likely (RRR: 1.187; 95% CI: 1.138-1.239 and RRR: 0.195; 95% CI: 0.074-0.511 respectively) to have higher CFS than their compatriots that initiated both marriage and childbearing at or after age 22 controlling for covariates as presented in the controlled model. The independent effects model shows that the risk of having 1-3 children compared to 6 or more children was lower (RRR: 0.073; 95% CI: 0.009-0.611; RRR: 0.136; 95% CI: 0,046-0.402 and RRR: 0.421; 05% CI: 0.135-1.312) for women whose ages at first marriage were <15, 15-18 and 19-21 respectively relative to 22+. Women with 1-3 children were 2.5 times more likely to use contraception than women with 6 or more children. Conclusion Having no education, being a rural resident and having a medium household wealth all increase the risk of having higher CFS. Women that marry before age 19 have a higher likelihood of having 6 or more children by the end of their reproductive period. The study concludes that apart from a woman’s age at first marriage and first birth, a complex network of factors interact to determined CFS.

Microbial immune escape represents the primary cause of induced pathogenesis in humans, and it represents a pivotal method used by viral agents to increase their load and suppress key mechanisms of the innate and adaptive immune system. This phenomenon represents the primary factor that led to the onset of the 1918-1920 A(H1N1) Influenza and 2020-2022 COVID-19 pandemics, and it possibly played a major role in the onset of the AIDS pandemic as well. Moreover, repeated incidents of immune evasion could be associated with higher rates of cellular aging (Jackson et al., 2017), most likely due to the consequent increased demands of energy consumption. Highly developed viral immune evasion ultimately indicates the high inner intelligence of human immunity due to reflective and imitative characteristics of reactions that are produced against initial actions. Ribonucleic acid-based viral genomes contain open reading frames, which consist of genes producing sixteen non-structural proteins. Such proteins play a considerable role in desensitizing first-line immunity during cellular infection, and non-structural proteins 1, 10 and 16 have the strongest effects against a healthy expression rate of Type I and Type III Interferon-encoding genes. Type I Interferons consist of IFN-alpha, -beta, -delta, -epsilon, -omega, -tau and -zeta, whilst Type III Interferons consist of IFN-lambda1, -lambda2 and -lambda3, and they act as stimulators of intracellular signalling cascades that in turn lead to the activation and expression of interferon-stimulated genes (Brown et al., 2022). The earlier the interferon-stimulated genes are activated, the lower the extent of pro-inflammatory mediation and overall, the more effective the antiviral immune response will be, given the exponential nature of the viral load increase. Non-structural protein 16 methylates the 5’ cap of the virus, making the pathogen-associated molecular patterns less recognisable by pattern-recognition receptors, and it requires activation by bonding with non-structural protein 10. It is preserved in the S-Adenosyl-L-Methionine pocket of the SARS-CoV-2 genome. Non-structural protein 1 (NS1) directly cleaves the host cell mRNA producing Type I and possibly Type III Interferons, thereby preventing a translation process of the immune proteins. NS1 has recently been found to often be packaged into exosomes once secreted by the viral genome in the cytosol, meaning that exocytosis and paracrine signalling to neighbouring cells before their actual infection is possible. As a result, NS1 is highly capable of silencing the first-line immune responses of uninfected neighbouring cells as well, thereby highlighting the need to adjust the focus of therapeutics and vaccinology toward first-line immunity and further indicating its foundational importance in the support for the development of precise and balanced defenses against microbial agents of concern (EL SAFADI et al., 2022).

The mathematical modelling of reverse logistics inventory systems ignores that returned items may arrive out of sequence, i.e. with different number of remanufacturing times. Moreover, such modelling assumes that the retuned items may retain the same quality upon recovery regardless of how many times they have been previously remanufactured. This paper develops a new mathematical expression of the percentage of retuned items that can be remanufactured a finite number of times. The proposed expression is modelled as a function of the expected number of times an item can be remanufactured on its life cycle and the number of times an item can be technologically (or optimally) remanufactured based on its quality upon recovery. The model developed in this paper considers joint production and remanufacturing options. The return rate is a varying demand dependent rate, which is a decision variable with demand, product deterioration, manufacturing and remanufacturing rates being arbitrary functions of time. The model considers the initial inventory of returned items in the mathematical formulation, which enables decision makers to adjust all functions and input parameters for subsequent cycles. Illustrative examples indicate that dependent purchasing price of recovery items and the incorporation of remanufacturing investment cost significantly impact on the optimal remanufacturing policy.

A triangular lattice model for pattern formation by core-shell particles at fluid interfaces is introduced and studied for the particle to core diameter ratio equal to 3. Repulsion for overlapping shells and attraction at larger distances due to capillary forces are assumed. Ground states and thermodynamic properties are determined analytically and by Monte Carlo simulations for soft outer- and stiffer inner shells, with different decay rates of the interparticle repulsion. We find that thermodynamic properties are qualitatively the same for slow and for fast decay of the repulsive potential, but the ordered phases are stable for temperature range depending strongly on the shape of the repulsive potential. More importantly, there are two types of patterns formed for fixed chemical potential - one for a slow and another one for a fast decay of the repulsion at small distances. In the first case two different patterns - for example clusters or stripes - occur with the same probability for some range of the chemical potential. For fixed concentration, an interface is formed between two ordered phases with the closest concentration, and the surface tension takes the same value for all stable interfaces. In the case of degeneracy, a stable interface cannot be formed for one out of four combinations of the coexisting phases, because of a larger surface tension. Our results show that by tuning the architecture of a thick polymeric shell, many different patterns can be obtained for sufficiently low temperature.

There are no theorems (proven theories) in the biological sciences. We propose that the 3 31 nt minihelix tRNA evolution theorem be universally accepted as one. The 3 31 nt minihelix theorem completely describes evolution of type I and type II tRNAs from ordered precursors (RNA repeats and inverted repeats). Despite diversification of tRNAome sequences, statistical tests overwhelmingly support the theorem. Furthermore, the theorem relates the dominant pathway for the origin of life on Earth, specifically, how tRNAomes and the genetic code may have coevolved. Alternate models for tRNA evolution (i.e., 2 minihelix, convergent and accretion models) are falsified. In the context of the pre-life world, tRNA was a molecule that via mutation could modify anticodon sequences and teach itself to code. We relate the clearest history to date of the chemical evolution of life on Earth. From analysis of tRNA evolution, ribozyme-mediated RNA ligation was a primary driving force in evolution of complexity during the pre-life to life transition on Earth.

Herbs and Plants have been the most important form of medicine in India since ancient times. the plant kingdom is a goldmine of potential drugs and active molecules. Medicinal plants played a vital role in manufacturing human health and improving the quality of human life for thousands of years. During the last decade, the use of traditional medicine has expanded globally and gained popularity. Medicinal plants have healing properties due to the presence of various complex chemical substances of different compositions. Medicinal plants have served humans well as valuable components of medicines, flavorings, beverages, cosmetics, and dyes. Ficus religiosa is one of the medically important plants belonging to the family of Moraceae. It has been used broadly by Ayurvedic practitioners in India to treat various diseases. The present work is an endeavor to improve the effectiveness of synthetic drugs in combination with plant extracts.

Base on building information modeling(BIM) plus with Robotic process automation (RPA) technology is rapid development in smart building operations and maintenance (O&M). RPA is a workflow-based automated execution tool that is particularly well suited for replacing manual execution of simple and repetitive tasks using computer systems. The use of RPA technology can saves man-hours and increases productivity, which is important for the automation of building operations and maintenance operations.. The BIM technology, as an advanced technology in the construction industry, it can provide new ideas and methods for building operation and maintenance based on its visualization characteristics. That’s integrating RPA with BIM technology which will enhance the digitalization and virtualization of smart building operation and management. In this article will first introduce the features of RPA and BIM technology and then discuss the technical roadmap for remote automated operation and maintenance of smart building equipment room to implemention a low-cost and high efficient building equipment room operation and maintenance solution.

Publically available (own) transcriptomic data were re-analyzed to quantify the alteration of functional pathways in the thyroid cancer, establish the gene hierarchy, identify potential gene targets and predict the effects of their manipulation. The expression data were generated from one case of papillary thyroid carcinoma (PTC) and from genetically manipulated BCPAP (papillary) and 8505C (anaplastic) human thyroid cancer cell lines. The study used the genomic fabric perspective that considers the transcriptome as a multi-dimensional mathematical object based on the three independent characteristics that can be derived for each gene from the expression data. We found remarkable remodeling of the thyroid hormone synthesis, cell cycle, oxidative phosphorylation and apoptosis pathways. Serine peptidase inhibitor, Kunitz type, 2 (SPINT2) was identified as the Gene Master Regulator of the investigated PTC. The substantial increase of the expression synergism of SPINT2 with apoptosis genes in the cancer nodule with respect to the surrounding normal tissue (NOR) suggests that its experimental overexpression may force the PTC cells into apoptosis with negligible effect on the NOR cells. The predictive value of the expression coordination for the expression regulation was validated with data from 8505C and BCPAP cells before and after lentiviral transfection with DDX19B.

Caregiving thinking is the ability to make connections between thought and emotion and encourages man to build a system of reflective value to judge matters compassionately and lovingly. Therefore, this study aims to investigate the components of caring thinking in Persian books in the first year of secondary education. This research is a descriptive and content analysis using the Shannon Entropy method. The sources analyzed are three volumes of the textbook of the first year of high school in 2021-2022. The research tool is a content analysis checklist according to the components of caring thinking, the validity of which was verified by Five experts in education. According to the analysis of the content of the book under study, it can be stated that in the Persian textbooks of the first year of high school, the critical factor of the component of normative thinking (0.2051), the component of appreciative thinking (0.2043), the component of active thinking (0.2020), Was the component of empathetic thinking (0.1957) and the component of affective thinking (0.1929). Therefore, the coefficient of the importance of the components of caring thinking in the Persian books of the first year of high school is not the same, and balance is not observed in regulating the content of these books. Considering the vital role of caring thinking in students' lives, it is suggested that the authors of textbooks pay attention to this crucial issue while reviewing the content of Persian books in the first year of high school.

The Influenza A Virus (IAV) represents an enveloped, positive-sense and single-stranded RNA-based virus that infects mammals mainly via the respiratory system, although other bodily systems are also infected and undergo various extents of inflammatory pathogenesis. There are two well-known strains of IAV that cause life-threatening disease in mammals; H1N1 and H5N1, and the first strain caused the 1918 IAV H1N1 pandemic that claimed between 30 and 50 million human lives. Due to the significant ability of IAV to evade important immune recognition, the virus was observed to favor the onset of secondary microbial infections (i.e. bacterial or fungal), as the overall performance of the immune system became transiently weakened during the viral infection. During the IAV H1N1 pandemic, many patients died as a result of bacterial pneumonia, as pathogenic bacteria, such as Streptococcus pneumoniae and Haemophilus influenzae, gained a wider opportunity to colonize and infect vital areas of the lower respiratory tract, and such a phenomenon led to the excessive, prophylactic usage of antibiotics due to the increased levels of panic, which in turn favored the natural selection of bacteria with genes that became resistant to such antibiotics. Antibiotics might be required for usage solely when bacteria are known to be colonizing vital areas of the human body, and this aspect is tricky, as colonization is asymptomatic and screening is consequently rare. Recently, new variants of the avian IAV H5N1 strain were transmitted from live, infected birds to mammals, including humans in some isolated cases, and given that there have already been several zoonotic spillover events overall since the beginning of 2023, we are rapidly approaching the time when a zoonotic spillover into humans will mark the first epidemic outbreak of the avian flu in humans. A lethality rate of 60% was projected by the World Health Organization, as the virus was shown to favor the development of life-threatening hyper-inflammatory responses at the levels of alveolar tissues constituted by Type II pneumocytes. There are hints that novel variants of H5N1 are capable of infecting the intestinal layer, as recently, two dolphins died as a result of ingesting infected birds within the area of the British Isles. IAV is known to suppress the production and transmission of Type I Interferons by expressing various non-structural proteins (NSPs), such as NSP1, which was found to be also packaged into exosomes and transmitted to neighboring uninfected cells, thereby preventing them from responding to the virus in the first place. A more pronounced rate of innate immune evasion would probably be observed in H5N1 IAV infection than in the infection caused by recent variants of H1N1 IAV. The H5N1 strain of IAV was also found to secrete a higher concentration of NSP1 than SARS-CoV-2, indicating the existence of an association to the greater mortality rate of H5N1 IAV infection. A direct, prophylactic stimulation of the interferon system using a reduced oral or nasal dosage of recombinant anti-inflammatory and anti-viral interferon glycoproteins may represent the most viable approach to prevent an emergence of a life-threatening H5N1 IAV pandemic. A similar non-invasive approach could be developed for an Marburg Virus (MARV) and a Nipah Virus (NiV) infection of humans, as risks of the emergence of a Marburg epidemic and also of a Nipah epidemic may be substantial at this stage as well. Clinical testing of clinical approaches as such could be of critical importance at the moment. Animals could also benefit from related clinical approaches. Somatic natural and adaptive lymphocytes treated with IFN I and III could also constitute a substantial approach of immunization and heavily favor an indefinite shift in the evolutionary battle between the host organism and microbes of public health concern.

Two-dimensional (2D) of transition metal dichalcogenides (TMDCs) are potential candidates for thermoelectric (TE) applications due to their unique structural properties. In this paper, we constructed an 2D monolayer TMDCs semiconductor γ-PbSn2(X=S, Se, Te) and first-principles calculations and Boltzmann transport theory are used to study the thermoelectric performance. We found that γ-PbSnX2 had an ultra-high carrier mobility up to 4.04×103 cm2V−1s−1 leading to a metal-like electrical conductivity. Meanwhile, γ-PbSnX2 both have high Seebeck coefficients, resulting in high power-factors, and also shows intrinsic low lattice thermal conductivity of 6-8 W/mK at room temperature. The lower lattice thermal conductivity and high power-factors resulted in excellent thermoelectric performance. The high ZT values of γ-PbSnS2 and γ-PbSnSe2 were as high as 2.65 and 2.96 at 900 K, respectively. The result suggests that the monolayer γ-PbSnX2 are better candidates for excellent thermoelectric performance.

Control of canine infections with Leishmania infantum (L. infantum), a major zoonotic disease in Brazil and southern Europe is becoming increasingly important due to their close proximity to humans, the increasing import of dogs from endemic regions and impact of climate change on vector spreading. Simple, rapid and reliable diagnostic tests are therefore needed to detect infected dogs. Here, we re-evaluated different serological methods for the diagnosis of canine leishmaniosis (CanL) in Croatia and Brazil. The diagnostic performance of the indirect fluorescent antibody test (IFAT) and the VetLine® Leishmania ELISA was compared with three rKLi8.3 based diagnostic test systems, the rKLi8.3 ELISA, the INgezim® Leishma CROM lateral flow test (LFT) and the VetBlot® Leishmania LineBlot. CanL symptomatic dogs were efficiently diagnosed by all tests, except the VetLine® Leishmania ELISA, which is based on whole Leishmania antigens. The advantage of rKLi8.3 was also observed in oligo-and asymptomatic dogs from Brazil and Croatia, although with reduced diagnostic efficiency compared to symptomatic dogs. Similar to IFAT and rKLi8.3 ELISA, the LFT did not cross-react with other common canine pathogens, showed a very high specificity for healthy dogs from endemic regions of both countries and did not react with healthy, vaccinated dogs in Brazil. In conclusion, sero-diagnostic tests based on the rKLi8.3 antigens are superior to whole parasite antigens and the LFT has the advantage of providing a laboratory independent, rapid and specific diagnosis of CanL.

Document deskewing is a fundamental problem in document image processing. While existing methods have limitations, such as Hough Line Transformation that can deskew images upside down, and Deep Learning models that require huge amounts of human labour and computational resources and still fail to deskew while taking care of orientation, OCR-based methods also struggle to read text when it is tilted. In this paper, we propose a novel, simple, cost-effective deep learning method for fixing the skew and orientation of documents. Our approach reduces the search space for the machine learning model to predict whether an image is upside down or not, avoiding the huge search space of predicting an angle between 0 and 360. We finetuned a MobileNetV2 model, which was pre-trained on imagenet, using only 200 images and achieve good results. This method is useful for automation-based tasks, such as data extraction using OCR technology, and can greatly reduce manual labour.

The dependence on Unmanned Aerial Vehicles (UAVs) has dramatically increased in many sectors around the globe. UAVs are in high demand, and their technology is developing quickly due to their sophisticated ability to handle various issues. UAVs are capable of replacing labor-intensive tasks with conducive and safe regulation. Additional tools or sensors need to be added to the UAVs system to ensure the implementation of UAVs able to serve into industrial level. The paper aims to consolidate and present a thorough understanding of the various stages of image processing pipelines deployed in UAV applications, including image acquisition, preprocessing, feature extraction, object detection and tracking, and decision-making processes. Throughout this paper, several aspects were deliberate such as strengths, limitations, and performance metrics of existing approaches, this paper seeks to provide researchers, engineers, and practitioners with valuable insights into the challenges and opportunities of image processing systems for UAVs. Ultimately, the synthesis of this knowledge will contribute to enhancing the effective-ness, autonomy, and applicability of UAVs in diverse fields such as surveillance, agriculture, disaster management, and environmental monitoring.

This paper presents a compact on-chip antenna architecture for 5G body centric networks (BCNs) applications. A dual meander line (DML) integrated antenna consists of two stacked layers of two turns of meander lines and a ground metal layer. The DML structure decreases the resonant frequency, increases tuning bands and broadens the operating bandwidth to be a suitable choice for high data rate biomedical applications. The antenna’s performance is evaluated in both scenarios inside and outside the human body. The proposed antenna is fabricated using UMC180 nm CMOS technology with a total area of 1150µm×200µm, and operates at bands 22 GHz, 34 GHz, 44 GHz and 58 GHz with an operating bandwidth up to 2 GHz at impedance bandwidth ≤ 7.5 dB (VSWR≤2.5). The proposed antenna is simulated using high frequency structure simulator (HFSS) and shows good agreement between measured and simulated results.

Introduction. A needle is inserted into a joint for arthrocentesis or injection of a therapeutic medication(s), commonly a corticosteroid. The aim of this paper is to discuss the first theme identified from a scoping review of corticosteroid injections for the pathology of the first metatarsophalangeal joint. Pathology. The two most common pathologies affecting the first metatarsophalangeal joint are osteoarthritis and bunions. An arthritic joint is regularly injected with a corticosteroid, but bunions are not. Other pathologies that may receive an injection include rheumatoid arthritis, gout, sesamoiditis and post-operative arthrofibrosis. Discussion. Most available evidence discusses corticosteroid injections for osteoarthritis, but there is a paucity of high-quality evidence, especially for corticosteroid use in other pathological conditions. Conclusion. Whilst the evidence base suggests that corticosteroid injections are safe short- and mid-term treatment options for a range of soft tissue and joint pathology, the specific indications, and short/long-term outcomes in the first metatarsophalangeal joint pathologies are not clear and warrant further study.

Should our planet be visited by an extraterrestrial civilization, the prevailing assumption would undoubtedly be that the extraterrestrial civilization is Type I i.e. its capacity for interstellar travel results from its technological development. This assumption is dangerous for it unnecessarily leads to the Extraterrestrial Tandem Hypothesis (ETH): the belief than an extraterrestrial civilization technologically capable of interstellar travel must also be technologically compatible with the inexorably rapid annihilation of life on Earth. Such a state of things would compromise the planet’s capacity to stage a confident defense should the extraterrestrials prove belligerent. The presumption of Type I extraterrestrials (on the premise of the capacity for interstellar travel alone) is unfounded as extraterrestrials may be Type II i.e. capable of interstellar travel by virtue of natural intrinsic or extrinsic factors. This paper advances, most importantly, that the fundamental policy of first contact should be the employment of various strategies toward the evaluation of the technological capacity of visiting extraterrestrials. This evaluation must be particularly devoted to the detection of Type II extraterrestrials masquerading as Type I (using concealment and Wizard of Oz strategies). Integral to this detection are the concepts of the precedence relation and The Extraterrestrial Exclusion Principle (EEP). A precedence relation is a qualitative relation expressing the relative difficulty of producing a technological action. The Extraterrestrial Exclusion Principle states that a Type I extraterrestrial life form is excluded from certain actions. Such actions are lower in precedence than interstellar travel and may be described as in violation of the EEP or EEP forbidden. EEP actions reveal extraterrestrials to be Type II. As an example, the value of the Hawking Warning is subjected to EEP analysis. Furthermore, a hypothetical conundrum in linguistics termed the Kryptonian Linguistic Paradox (KLP) is discussed as a case of an EEP forbidden act. Finally, the paper explores the limitations of the stated fundamental policy of first contact.

The integration of spray drying and agglomeration offers significant advantages, such us continuous production with lower energy consumption. However, it is a knife-edge process with a narrow operating window and limited degrees of freedom that decide between successful agglomeration and fluidized bed blockage due to excessive moisture. In this contribution, factors influencing the spray-through agglomeration process of skim milk powder as a model system were investigated via a design of experiments. Three in-line monitoring methods were applied and tested to observe the most important parameters in the agglomeration process: product moisture and particle size distribution. Regarding the moisture content, a capacitive moisture sensor was calibrated with linear regression and a near-infrared sensor with partial least squares regression. Near-infrared spectroscopy was found to be the suitable method for determining moisture content, while the capacitive moisture sensor mainly provides information on the bulk density, the filling level or fluidization state in the fluidized bed. Additionally, particle size distribution data was extracted from the spectral data using in-line data of a spatial filter velocimetry probe in the fluidized bed. This opens the potential to monitor both parameters in real-time with a single non-invasive sensor.

Binary mixtures of surfactants build a binary mixed micelle in which the ratio of surfactants usually differs from the initial ratio of surfactants in their binary mixture. The thermodynamic stabilization of the binary mixed micellar pseudophase about the hypothetical ideal state (intermolecular interactions between the different particles and the conformational states of the particles are identical to those of monocomponent states) is described by the molar excess Gibbs free energy (gE). The dependence of gE on the molar fraction of surfactant i (xi) from the binary mixed micelle can be described by a symmetric function (symmetry is described to the line parallel to the y-axis and passes through xi = 0.5) or by an asymmetric function. Theoretical analysis (canonical partition function, conformational analysis) examines how the presence of different polar functional groups, some of which are sterically shielded from the steroid skeleton of bile salt (surfactant), affect the symmetry of the function gE of the binary mixed micelle of the cholic acid anion (bile salt) and classical cationic surfactant (hydrophobic tail and polar head). Suppose the steroid skeleton of the bile salt contains non-sterically shielded polar groups (or the temperature is relatively high). In that case, gE is a symmetric function. At the same time, if the steroid skeleton also contains sterically shielded polar groups, then the gE function is asymmetric.

OBJECTIVE A quality improvement study to assess catheter-associated urinary tract infection (CAUTI) rate post-implementation of a bladder catheter with integrated active drain line urine clearance and automated intra-abdominal pressure monitoring in a burn intensive care unit (ICU). DESIGN Eight-year retrospective before and after study (2015–2022). SETTING A single American Burn Association verified Burn Center with fourteen inpatient beds. PATIENTS Patients meeting criteria for admission to a Burn Center METHODS Retrospective cohort study following the implementation of a novel urine output monitoring system with integrated drain line and urine clearance. Data from a 48-month (from January 2015-December 2018) historical control (period 1) were compared to data from a 28-month (from January 2020 to April 2022) post-implementation period (period 2). Pre- and post-implementation CAUTI event incidences were compared. Charts were reviewed to characterize the patients. RESULTS A total of 42 CAUTIs in 2243 patients were identified using the National Health and Safety Network (NHSN) definition during the analyzed period. There were 40 CAUTI events in period 1 and two CAUTIs in period 2. The incidence of CAUTI events pre-implementation was 0.030 (mean of 10 CAUTI events per year) compared to 0.002 (mean of 1 CAUTI event per year) post-implementation of an automatic drain line clearing UO monitoring system showing a significant reduction in CAUTI events (P<0.01, risk ratio novel vs. gravity bladder catheter 0.071, 95% confidence interval: 0.017-0.294). CONCLUSIONS CAUTIs were reduced in the period following the implementation of a novel urinary catheter system with an integrated active drain line and urine clearance in burn patients.

By making periodic thru-holes in a suspended film, the phonon system can be modified. Motivated by the BCS theory, the technique -- so-called phonon engineering -- was applied to a metallic niobium sheet. It was found that its electrical resistance dropped to zero at 175 K, and the zero-resistance state persisted up to 290 K in the subsequent warming process. Despite the initial motivation, neither these high transition temperatures nor the phase transition with thermal hysteresis can be accounted for by the BCS theory. Therefore, we abandon the BCS theory. Instead, it turns out that the metallic holey sheet is partly oxidized to form a niobium-oxygen square lattice, which has points of resemblance to a copper-oxygen plane, the fundamental component of cuprate high-T_c superconductors. Therefore, the pairing mechanism underlying this study should be related to that of cuprate high-T_c superconductors, which we may not yet understand. In addition to the electrical results of zero resistance, the holey sheet exhibited a decrease in magnetization upon cooling, i.e., the Meissner effect. Moreover, the remnant magnetization was clearly detected at 300 K, which can only be attributed to persistent currents flowing in a superconducting sample. Thus, this study meets the established criteria for a conclusive demonstration of true superconductivity. Finally, the superconducting transition with the unambiguous thermal hysteresis is discussed. According to Halperin, Lubensky, and Ma, or HLM for short, any superconducting transition must always be first order with thermal hysteresis because of the intrinsic fluctuating magnetic field. The HLM theory is very compatible with the highly oriented system harboring two-dimensional superconductivity.

There are unsolved problems related to inflation, gravity, dark matter, dark energy, missing antimatter, and the birth of the universe. Some of them can be better answered by assuming the existence of aether and hypoatoms. Both were created during the inflation in the very early universe. While aether forms vacuum, hypoatoms, composed of both matter and antimatter and believed to be neutrinos, form all observable matter. In vacuum, aether exists between the particle-antiparticle dark matter form and the dark energy form in a dynamic equilibrium: A + A-bar = gamma + gamma. The same reaction stabilizes hypoatoms and generates a 3-dimensional sink flow of aether that causes gravity. Based on the hypoatom structure, the singularity does not exist inside a black hole; the core of the black hole is a hypoatom star or neutrino star. By gaining enough mass, ca. 3 X 10²² M_sun, to exceed neutrino degeneracy pressure, the black hole collapses or annihilates into the singularity, thus turning itself into a white hole or a Big Bang. The universe is anisotropic. Its center, or where the Big Bang happened, is at 0.66^+0.03_-0.01 times the radius of the observable universe at Galactic coordinates (l, b) = (286⁺¹⁰_-10, -43⁺⁷_-6). If we look from the Local Group to the center of the universe, the universe is rotating clockwise.

The interfacial mechanics and electrical properties of the SiC reinforced copper matrix composites were studied via the first principles method. The work of adhesion (Wad) and the interfacial energies were calculated to evaluate the stabilities of the SiC/Cu interfacial models. The carbon terminated (CT)-SiC/Cu interfaces were predicted more stable than those of the silicon terminated (ST)-SiC/Cu from the results of the Wad and interfacial energies. The interfacial electron properties of SiC/Cu were studied via the charge density distribution, charge density difference, electron localized functions and partial density of the state. The covalent C-Cu bonds were formed based on the results of the electron properties, which further explained the fact that the interfaces of the CT-SiC/Cu are stable than those of the ST-SiC/Cu. The interfacial mechanics of the SiC/Cu were investigated via the interfacial fracture toughness and ultimate tensile stress, and the results indicate that both CT- and ST-SiC/Cu interfaces are hard to fracture. The ultimate tensile stress of the CT-SiC/Cu is nearly 23GPa, which is smaller than those of the ST-SiC/Cu of 25 GPa. The strains corresponding to their ultimate tensile stresses of the CT- and ST-SiC/Cu are about 0.28 and 0.26, respectively. The higher strains of CT-SiC/Cu indicate their stronger plastic properties on the interfaces of the composites.

Neuromorphic computing, reconfigurable optical metamaterials operational over a wide spectral range, holographic and nonvolatile displays of extremely high resolution, integrated smart photonics and many other applications need phase-change materials (PCMs) of the next generation with better energy efficiency, wider temperature and spectral range for reliable operation compared to current flagship PCMs as Ge2Sb2Te5 or doped Sb2Te. Gallium tellurides are promising candidates to achieve the necessary requirements because of higher melting and crystallization temperatures, combined with a low switching power and fast switching rate. At the same time, Ga2Te3 and non-stoichiometric alloys appear to be atypical PCMs, characterized by regular tetrahedral structure and the absence of metavalent bonding. The sp3 gallium hybridization in cubic and amorphous Ga2Te3 is also different from conventional p-bonding in flagship PCMs, raising a question of the phase-change mechanism. Besides, gallium tellurides exhibit a number of unexpected and highly unusual phenomena as nanotectonic compression or viscosity anomaly just above melting. Using high-energy X-ray diffraction, supported by first-principles simulations, we will unravel the atomic structure of amorphous Ga2Te5 PLD films, compare it with the crystal structure of tetragonal gallium pentatelluride, and investigate electrical, optical and thermal properties of these two materials to estimate their potential for memory applications as well as for other fields.

Sphalerite has been recognized as the most important carrier of critical metal of Indium (In) due to that In mainly exists in the sphalerite lattice by isomorphic substitution. There are two significant replacing schemes for In entry into sphalerite, these are, Ag++In3+→2Zn2+ and Cu++In3+→2Zn2+. In order to understand the reaction process and constraints of the two substitution schemes, this paper uses first-principles methods to calculate In and Ag, Cu replacing Zn in sphalerite. According to the substitution schemes of Ag++In3+→2Zn2+ and Cu++In3+→2Zn2+, two doped sphalerite systems of Zn30InAgS32 and Zn30InCuS32 were constructed using 2×2×2 supercell model of sphalerite. Firstly, the pressure is controlled to 30MPa, and the temperature is set from 20-40MPa to simulate the response of the two doped sphalerite systems to temperature; Then, the control temperature was unchanged to 600K, and the pressure was set from 20-40MPa to investigate the pressure control of the two doped sphalerite systems. The lattice parameters, substitution energy, electronic structure, and population analysis of the designed models before and after replacement have been critically compared. The main conclusions can be drawn that it is more stable for In to enter sphalerite via the coupled substitution scheme Cu++In3+→2Zn2+, and the conditions that the two substitution schemes most likely to occur are 650K and 40MPa. This study not only reveals the physical and chemical properties of In-rich sphalerite formed by the two reaction processes of Ag++In3+→2Zn2+ and Cu++In3+→2Zn2+, but also has a certain enlightenment effect on the search for indium in sphalerite, and promotes the application of first principles in mineralization analysis.

We aimed to estimate the proportion of the population infected with SARS-CoV-2 in the first year of the pandemic. The study population consisted of outpatient adults with mild or no COVID-19 symptoms, and was divided into subpopulations with different levels of exposures. Of the subpopulation without known previous COVID-19 contacts 4143, of the subpopulation with known COVID-19 contacts 594 persons were investigated. IgG- and IgA-seroprevalence and RT-PCR positivity were determined in context with COVID-19 symptoms. We hope to have contributed to the understanding of the significance of the asymptomatic and mild infections in the long persistence of the pandemic.

(1) Background: Preeclampsia (PE) prediction in the first trimester of pregnancy is a challenge for the clinicians. The aim of this study was to evaluate and compare the predictive performances of machine-learning based models for the prediction of preeclampsia, and its subtypes; (2) Methods: This prospective case-control study evaluated pregnancies that occurred in women who attended a tertiary maternity hospital in Romania between November 2019 and September 2022. The patients’ clinical and paraclinical characteristics were evaluated in the first trimester, and were included in 4 machine learning based models: decision tree (DT), naïve Bayes (NB), support vector machine (SVM), and random forest (RF), and their predictive performance was assessed; (3) Results: early-onset PE was best predicted by DT (accuracy: 94.1%), and SVM (accuracy: 91.2%) models, while NB (accuracy: 98.6%), and RF (accuracy: 92.8%) models had the highest performance when used to predict all types of PE. The predictive performance of these models was modest for moderate and severe types of PE, with accuracies ranging from 70.6% and 82.4%; (4) The machine learning-based models could be useful tools for PE prediction in the first trimester of pregnancy.

Influence lines are indispensable tools for visualizing and analyzing the dynamic variations in force factors induced by external loads within structural systems. Among these methods, the energetic approach stands as a widely employed technique, rooted in the fundamental principle of work done by changing forces. It enables engineers to transform intricate structural analysis problems into manageable ones by exploring the first derivatives of the radius vector, which represent infinitesimal velocity or displacement. This methodology seamlessly interweaves concepts such as carrier motion, relative motion, and the construction of mechanisms, bringing fresh perspectives to the analysis of influence lines. In this article, we explore the nuances of these novel methods within the domain of mechanism theory. Through comprehensive elaboration and analysis, we elucidate the underlying principles and practical applications of Jacobian contours. Crucially, we introduce a straightforward, rapid, and programmable approach, promising to revolutionize influence line determination in structural engineering. This method bridges the gap between theory and practice, offering the potential to elevate the accuracy, efficiency, and adaptability of influence line analysis. As such, it represents a significant advancement in the field of structural and applied mechanics, with broad-reaching implications for engineering practice.

The increasing enrollments in the English Departments at Palestinian universities highlight the need to understand the attitudes and expectations of students, as these factors can significantly impact their motivation and proficiency in learning English as a foreign language (EFL). This study aimed to explore the attitudes and expectations of Palestinian first-year English majors in relation to EFL learning. A total of 244 students participated in the study, completing a questionnaire and participating in interviews to provide a comprehensive understanding of their perspectives. The results revealed a high level of enthusiasm among the students towards EFL, as evidenced by their strong attitudes and exceptionally high expectations. Moreover, the study identified specific student characteristics, including gender and the required hours dedicated to English learning, as well as the experience of studying abroad, which served as predictive factors for their attitudes and expectations. The findings emphasize the importance of regularly assessing the attitudes and expectations of learners in English departments to effectively cater to their needs and attract more students. By understanding the motivating factors and aligning instructional strategies accordingly, English departments can create a more engaging and tailored learning environment for students pursuing English as a foreign language.

Despite the recent advances in melanoma therapy, the need for new targets and novel approaches to therapy is urgent. We previously reported melanoma actives that work via binding and downregulating spliceosomal proteins hnRNPH1 and H2. In a separate study, we reported that these compounds were non-toxic to Balb/C mice at 50 mg/kg suggesting their utility in in vivo studies. In the present study, we aimed to determine the therapeutic potential of these compounds by testing them in A375 cell-line derived xenograft in nu/nu mice. Animals were randomized into four groups (n=12/group) to receive subcutaneous administration of vehicle, 10 mg/kg vemurafenib, and 25 mg/kg 2155-14 and 2155-18 three times per week for 15 days along with a control group. The results revealed that both 2155-14 and 2155-18 significantly decreased the growth of A375 tumors, which was comparable to vemurafenib. These results were confirmed by tumor volume, weight, and histopathological examination. In conclusion, these results suggest a therapeutic potential of targeting spliceosomal proteins hnRNPH1 and H2.

Background: Injury is an important cause of mortality and morbidity.(1). FA is the immediate assistance provided to a suddenly injured or sick person until professional help arrives or that person has recovered.(2), could be a potential factor differentiating between life and death in RTA . Many lives would be saved if proper first aid is provided early. (3) In the middle east, there are limited studies that explore knowledge and practices towards first aid needed during RTA. Objective: The main aim of this study is to investigate the knowledge and attitude towards first aid among drivers in Sharjah. Methodology: A cross-sectional study was conducted through a self-administered questionnaire written in Arabic and English languages. Participants were 18 years or older holding a driving license in the city of Sharjah. Paramedics and certified participants with a certification from authorized organizations were excluded . A non-proportional convenient sampling method was used. A total of 343 participants have completed the questionnaires. Data was entered and analysed using SPSS. Results: Majority of the study participants were less than 40 years old and (56.76%) were males. Most participants(94.2%) indicated that they know the term ‘First Aid’. However, (49.73%) of the participants knew the ambulance number and (52.43%) of the participants indicated that the victim should be moved to the hospital without the ambulance. With regards to attitude, 34.86% were not willing to provide first aid in the case of RTA. The main reason was lack of knowledge followed by fear of legal consequences. Most participants (83,78%) were willing to participate in first aid classes to improve their knowledge and attitude. Conclusion: Most participants are aware of the basic term of first aid; however, they are not willing to provide first aid in cases of RTA due to lack of knowledge and fear of legal consequences. Based on these findings we recommend providing first aid classes for new drivers and to obtain certification. References: 1 and 3. Midani, O., Tillawi, T., Saqer, A., Hammami, M., Taifour, H. and Mohammad, H., 2020. Knowledge And Attitude Toward First Aid: A Cross-Sectional Study In The United Arab Emirates. 2.Van de Velde S, Heselmans A, Roex A, Vandekerckhove P, Ramaekers D, Aertgeerts B. Effectiveness of nonresuscitative first aid training in laypersons:A systematic review. Ann Emerg Med 2009;54:447-57, 457e1-5.

In the face of climate change, bringing more useful alleles and genes from wild relatives of wheat is crucial to develop climate-resilience varieties. We used two populations of backcrossed recombinant inbred lines (BIL1 and BIL2), developed using two intra-specifically diverse Aegilops tauschii accessions from lineage 1 and lineage 2, respectively, and backcrossing to common wheat cultivar ‘Norin 61’. The study aimed to identify quantitative trait loci (QTL) associated with heat stress (HS) tolerance. The two BILs were evaluated under heat stress environments in Sudan for phenology, plant height (PH), grain yield (GY), biomass (BIO), harvest index (HI), and thousand kernel weight (TKW). Grain yield was significantly correlated with BIO and TKW under HS; therefore, stress tolerance index (STI) was calculated for these traits as well as for GY. A total of 16 heat tolerant lines were identified based on GY and STI-GY. The QTL analysis performed using inclusive composite interval mapping identified a total of 40 QTLs in BIL1 and 153 QTLs in BIL2 across all environments. We detected 39 QTLs associated with GY-STI, BIO-STI, and TKW-STI in both populations (14 in BIL1 and 25 in BIL2). The QTL associated with STI were detected on chromosomes 1A, 3A, 5A, 2B, 4B, and all the D-subgenomes. We found that QTL detected only under HS for GY on chromosome 5A, TKW on 3B and 5B, PH on 3B and 4B, and grain filling duration on 2B. The higher number of QTLs identified in BIL2 for heat stress tolerance suggests the importance of assessing the effects of intraspecific variation of Ae. tauschii in wheat breeding as it could modulate the heat stress responses/adaptation. Our study provides useful genetic resources for uncovering heat-tolerant QTLs for wheat improvement for heat stress environments.

Novel TFN membranes were examined for the removal of heavy metals (Cu and Pb) from synthetic wastewater in forward osmosis (FO) experiments using MgCl2 as a draw solute. The TFN membranes were fabricated on top of a commercial PS35 ultrafiltration membrane by in-situ interfacial polymerization of piperazine (PIP) and 1,3,5-benzenetricarbonyl trichloride (TMC) containing different amounts of dispersed functionalized halloysite nanotubes (HNTs) nanoparticles. The HNTs nanoparticles were functionalized with the first generation of poly(amidoamine) (PAMAM) dendrimers. The TFN and the control TFC membranes showed rejections of Cu2+ and Pb2+, ranging from 94.5% to 98.1%. The presence of heavy metal in the feed solution enhanced the FO performance of all membranes. In particular, the reverse flux of MgCl2 decreased at least 2.5 times compared to the experiments with pure water as a feed. Simultaneously, the water flux also increased. The improved FO performance of the membranes in the presence of heavy metal ions is attributed to their adsorption by the membranes. The adsorption of heavy metals was confirmed by a decrease in the negativity of zeta potential and the results from inductively coupled plasma mass spectrometry (ICP-MS) of the membranes after the FO experiments.

First responders, such as police officers, paramedics, and fire-fighters are at an increased risk of experiencing negative mental health outcomes compared to the general population. This predisposition can partially be attributed to common occupational stressors, such as poor workplace culture and mistreatment from leadership, which may provoke strong feelings of betrayal and humiliation. The Workplace Assessment Scale (WAS) was developed as there is currently no appropriate measure to assess such feelings in the first responder population. The scale consists of the Betrayal Subscale and the Humiliation Subscale, each comprised of 5 Likert scale questions which ask participants to report the frequency at which they experience specific feelings associated with their workplace. This pilot validation study was conducted to assess preliminary reliability and validity of the WAS, using data which was originally collected as part of a larger first responder-based observational study. Based on 21/22 (95%) participant responses, the internal consistency appeared to be strong for both sub-scales as well as the overall questionnaire. However, item 9 will likely require modification or deletion from the scale. The validity analysis found no significant correlations between WAS and other psychiatric scales. Additional research is needed for further analysis and validation of the WAS.

The commonly quoted bistable Higgs potential is not a proper description of the Higgs field because, among other technical reasons, one of its stable states acquires a negative expectation value in vacuum. We rely on formal catastrophe theory to derive the form of the Higgs potential that admits only one positive mean value in vacuum. No symmetry is broken during the ensuing phase transition that assigns mass to the Higgs field; only gauge redundancy is “broken” by the appearance of phase in the massive state, but this redundancy is not a true symmetry of the massless field. Furthermore, a secondary, certainly amusing conclusion is that, in its high-energy state, the field oscillates about its potential minimum between positive and negative masses; but it is doubtful that such evanescent states can survive below the critical temperature of 159.5 GeV, where the known particles were actually created.

Homelessness continues to be a pervasive public health problem throughout Canada. Hospital Emergency Departments (EDs) and inpatient wards have become a source of temporary care and shelter for homeless patients. Upon leaving the hospital, homeless patients are not more equipped than before to find permanent housing. The Bridge Healing Program in Edmonton, Alberta has emerged as a novel approach to addressing homelessness by providing transitional housing for those relying on repeated visits to the ED. This paper describes the three essential components to the Bridge Healing model: partnership between the ED and a Housing First community organization; facility design based on The Eden Alternative™ principles, and; grassroots community funding. This paper in conjunction with the current pilot project of the Bridge Healing facilities serves as a proof of concept for the model and can inform transitional housing approaches in other communities.

The classical joint economic lot-sizing (JELS) policy in a single-vendor single-buyer system generates an equal production quantity in all cycles, where the input parameters remain static indefinitely. In this paper, a new two-echelon supply chain inventory model is developed involving a hybrid production system that simultaneously focuses on green and regular production methods with optimal allocation fraction of green and regular productions. Unlike the classical mathematical formulation, each cycle is independent from the previous one, and consequently, the input parameters can be adjusted to be responsive to the dynamic nature of demand rate and price fluctuation. A rigorous heuristic approach is used to derive a global optimal solution for a joint hybrid production system. The model accounts for carbon emissions from production and storage activities related to green and regular produced items along with transportation activity under a multi-level emission-taxing scheme. The results emphasize the significant impact of green production on emissions. That is, the higher the allocation fraction of green production the lower the total amount of emissions generated by the system, i.e., the system becoming more sustainable. Adopting a hybrid production method not only decreases the greenhouse gas (GHG) emissions dramatically, but also reduces the per unit time total cost when compared with regular production. One of the main findings is that the total system cost generated by the base closed-form formula of the proposed model is considerably lower than that of the existing literature i.e., 33.59% (16.13%) lower in the first cycle (subsequent cycles) when the regular production method is assumed. Moreover, the optimal production rate generated by the proposed model is the one that minimizes the emissions production function. Illustrative examples and special cases that reflect different realistic situations are compared to outline managerial insights.

In Spain, the National Health System, of a public nature, provides care to Spaniards and other residents in Spain. It is a system adapted to the State of Autonomies, decentralized. Each Auton-omous Community has legislative capacity in its organization and management. We studied the agreement of private hospitals by the public system in La Rioja, an Autonomous Community of Spain located in the North of the Iberian Peninsula. Documentary sources from the General archives of La Rioja, the Institute of Riojan Studies, municipal funds (Logroño, Haro, Calahorra), and in-formation from catalogs and censuses of hospitals from the Ministry of Health, National Institute of Statistics, and Institute of Statistics of La Rioja have been reviewed. The hospital model of La Rioja is characterized by a predominance of public beds over private ones, although there is a growing trend in the number of private beds from 2013 onwards, due to the incorporation of two conva-lescent socio-health hospitals. A characteristic element of La Rioja has been the promotion of pub-lic-private collaboration, conceived as a strategic alliance. Regarding agreements, in La Rioja there has been a specialization in the socio-health space, whose formulas have been the management service contract and the concession of work. The development of the Health System in La Rioja, 1986-2019, has been determined by the presence of a mixed public-private hospital system and a progressively lower dependence on specialized hospitals from other Autonomous Communities.

Background and Objectives: The purpose of this study was to assess the bleeding that occurs during the first weeks of gestation and its implications throughout pregnancy. Secondarily, we studied the associated complications that appeared and tried to identify possible risk factors that could serve to select women at a greater risk of adverse outcomes that could benefit from an early diagnosis and improved monitoring. Materials and Methods: We selected all the women who consulted for first trimester metrorrhagia in the Emergency Department of the Hospital QuirónSalud in Malaga over the year 2015. We refer to first trimester metrorrhagia as that which occurs until week 12+6. Once the pregnant women were identified, we studied certain risk factors already present prior to the gestation and others associated with the gestation and its evolution. Results: After reviewing the visits to the obstetrics and gynecology emergency department, we selected those patients that met the inclusion criteria, resulting in a sample of 696 patients that we followed up. The average age of our patients was 34.1 years, with an average number of visits to the hospital of 1.67, most of them between the 5th and 8th weeks of pregnancy. 45.3% of these pregnancies resulted in a first trimester miscarriage, mainly between weeks 6 and 8. We tried to establish associations in order to identify possible risk factors, finding a relationship between increased maternal age and a higher risk of first trimester pregnancy loss, which rises as maternal age increases (33,37 4,316 years vs 35,01 4,740 years). This increase in risk is proportional to the increase in age. We made subgroups of women over 35 and over 40 and confirmed that increased age led to worse outcomes. We also studied several gestational complications and concluded that they appeared more frequently among older women. These complications include prematurity (33.11 vs 34.48 years), gestational diabetes (33.11 vs 36.06 years) and preeclampsia (33.25 vs 35 years). We reviewed the obstetric history of pregnant women whose gestation resulted in miscarriage and found that 50.5% of them had previously had another loss. Conclusions: Comparing the results with data from the general population, we found that the rate of first trimester miscarriage is up to 3 times higher among women who present bleeding during the first weeks of gestation compared to those who do not develop this complication. Maternal age is a risk factor for first trimester pregnancy loss and for the development of complications associated with pregnancy.

The study sought to determine the rate of discordant results between genotypic and phe-notypic tests for the diagnosis of drug resistant tuberculosis (DR-TB). Sputum samples and cultured isolates from suspected DR-TB patients were respectively analysed for My-cobacterium tuberculosis by Xpert® MTB/RIF (Cepheid, USA) and Line Probe Assays (LPA) (Hain, Germany). Discrepant Rifampicin (RMP) resistant results were confirmed using BACTEC MGIT960 (BD, USA). Of 224 RMP-resistant by Xpert MTB/RIF, 5.4% were suscep-tible to RMP by LPA. MGIT960 showed 75% agreement with LPA. Discrepancy was at-tributed to either heteroresistance or DNA contamination during LPA testing in 58.3% of cases. In 25% of samples showing agreement in RMP resistance between Xpert MTB/RIF and MGIT960, discrepancy was attributed to laboratory errors causing false RMP suscep-tible results with LPA. Of 16.7% of cases, discrepancy was attributed to false RMP suscep-tible results with Xpert MTB/RIF. Of 224 isolates, susceptibility to isoniazid (INH) by LPA was performed in 73.7% RMP resistant isolates, of which, 80.6% were resistant. All RMP resistant isolates by Xpert MTB/RIF were confirmed in 98.5% by LPA if TB isolates were resistant to INH, but only confirmed in 81.3% if TB isolates were INH susceptible (ρ < 0.001). In conclusion, Laboratory errors should be considered when investigating dis-cordant results.

A large body of evidence indicates that environmental agents can induce alterations in DNA methylation (DNAm) profiles. Radiofrequency electromagnetic fields (RF-EMFs) are radiations emitted by everyday devices which have been classified as “possibly carcinogenic”, however their biological effects are unclear. As aberrant DNAm of genomic repetitive elements (RE) may promote genomic instability, here we sought to determine whether exposure to RF-EMFs could affect DNAm of different classes of RE, such as long interspersed nuclear element1s (LINE-1), Alu short interspersed nuclear element and ribosomal repeats. To this purpose, we analysed DNAm profiles of cervical cancer and neuroblastoma cell lines (HeLa, BE(2)C and SH-SY5Y) exposed to 900 MHz GSM-modulated RF-EMF through an Illumina-based targeted deep bisulfite sequencing approach. Our findings showed that radiofrequency exposure did not affect DNAm of Alu elements in any of the cell lines analysed. Conversely, it influenced DNAm of LINE1 and ribosomal repeats in terms of both average profiles and organization of methylated and un-methylated CpG sites, in different ways in each of the three cell lines studied.

Background. To improve maternal and child health, it is essential to adhere to health-promoting and preventive measures. However, reliable information as well as effective tools are not easy to identify in this field. Our cross-sectional study investigated the needs and expectations of expectant and new mothers and fathers -primary users of an app supporting the first 1000 days of life. Methods. Between May and August 2022, we recruited expectant and new parents by administering a 71-item 5-point Likert scale questionnaire related to content, functionalities, and technical features of a hypothetical app. We stratified responses by sociodemographic characteristics and then performed ward hierarchical clustering. Results. The 94 women and 69 men involved in our study generally agreed with the proposed content, but expressed low interest in certain app functionalities, especially those related to interaction mechanism and interactivity. Women were generally more demanding than men, and family income declined as the needs and expectations increased. Conclusions. Our findings, resulting from the engagement of end-users, may be useful for designers and technology providers to implement mHealth solutions that, in addition to conveying reliable information, are tailored to the needs and preferences of end-users in the first 1000 days of life.