Device-mediated, non-invasive drug delivery across the blood-brain barrier (BBB) represents a significant advancement in treating neurological diseases. The BBB is a tightly packed layer of endothelial cells that shields the brain from harmful substances in the blood, allowing necessary nutrients to pass through. It is a highly selective barrier, which poses a challenge to delivering therapeutic agents into the brain. Several non-invasive techniques and devices have been proposed or investigated to enhance drug delivery across the BBB. This paper presents the current state of the art and case studies that address the pharmacology, technology, delivery systems, regulatory approval, ethical concerns, and future possibilities.

Background: Patients with infectious complications related to the presence of cardiac implantable electronic devices (CIED) constitute a heterogeneous group, including local pocket infection (PI) and lead related infectious endocarditis (LRIE). The diagnosis of CIED-related infection is often difficult and requires complex imaging and microbiological tests. The aim of the current study was to evaluate the usefulness of new simple hematological parameters in detecting infectious complications in patients with CIED and assessing their extent. Methods: The retrospective analysis of clinical data of 2909 patients (36.37% with CIED-related infections), undergoing transvenous lead extraction (TLE) procedures in three high-volume centres in the years 2006-2020, was conducted. The sensitivity and specificity of new hematological markers were evaluated: the neutrophil to lymphocyte ratio (NLR), neutrophil to platelet ratio (NPR), and lymphocyte to platelet ratio (LPR) in the diagnosis of infectious complications, assessment of the spread of the infectious process and differentiation of additional structures related to the presence of leads. Results: In patients with CIED infections, compared to the non-infectious group, high inflammatory parameters were confirmed, and the highest specificity of the new markers in detecting the infectious process was demonstrated. (79.47% for NPR and 72.82% for NLR). Analysis of laboratory parameters in infectious and non-infectious patients with the presence of additional lead-related masses showed the highest specificity of NPR (82,78%) in predicting the diagnosis of vegetation. Comparison of laboratory parameters in patients with LRIE and PI showed higher NLR % (4.24 vs 2.56; p<0.001, area under curve (AUC) in a receiver operating characteristic (ROC) curve: 0.67 and 0.78 respectively) and higher NPR (0.03 vs 0.02; p<0.001; AUC: 0,51 and 0,55) in patients with LRIE. The highest sensitivity in the detection of coexistence LRIE with PI has been demonstrated for NLR (87.33%). Conclusions: Novel hematological markers may be helpful in the recognition of the inflammatory process in patients with CIED, differentiation of vegetation and vegetation-like masses, and the extent of infection in patients with PI.

To this day, use of oily eye drops and non-invasive retinal delivery remains a major challenge. Oily eye drops usually cause ocular irritation and interfere with normal function of the eye, while ocular injections for retinal drug delivery cause significant adverse effects and a high burden on the healthcare system. Here the authors report a novel topical Non-Invasive Ocular Delivery Platform (NIODP) through the periorbital skin for high efficiency anterior and posterior ocular delivery in a non-human primate model (NHP). A single dose of about 7mg JV-MD2 (omega-3 DHA) via the NIODP reached the retina at Cmax of 111µg/g and the cornea at Cmax of 66µg/g. NIODP also delivered JV-DE1, an anti-inflammatory agent in development for dry eye diseases, as efficiently as eye drops did to anterior segments of NHP. The topical NIODP seems to transport drug candidates through the cornea pathway to the anterior and via the conjunctiva/sclera pathway to the posterior segments of the eye. The novel NIODP method has the potential to reshape the landscape of ocular drug delivery, especially for oily eye drops and retinal delivery, where the success of treatment lies in the ocular tolerability and bioavailability of drugs in the target tissue.

Antimicrobial peptides (AMPs) have emerged as a promising solution to tackle bacterial infections and combat antibiotic resistance. However, their clinical application has been hindered by their vulnerability to protease degradation and toxicity towards mammalian cells. To overcome these challenges, our study aims to develop a method to enhance the stability and safety of AMPs, applicable to effective drug-device combination products. KR12 antimicrobial peptide was chosen and in order to further enhance its delivery and efficacy, HIV TAT protein-derived cell-penetrating peptide (CPP) was fused to form CPP-KR12. A new product, CPP-KR12@Si, was developed by forming silica nanoparticles with self-entrapped CPP-KR12 peptide using the biomimetic silica precipitability due to its cationic nature. Peptide delivery from CPP-KR12@Si to bacteria and cells was delivered at a slightly delayed rate with improved stability against trypsin treatment and a reduction in cytotoxicity over CPP-KR12. Finally, the antimicrobial potential of CPP-KR12@Si/bone graft substitute (BGS) combination product was demonstrated, which is coated with CPP-KR12 in the form of nanoparticles on the surface of BGS. Self-entrapped AMP in silica nanoparticles is a safe and effective AMP delivery method that will be useful for developing a drug/device combination product for tissue regeneration.

A large body of evidence, replicated in many mouse models of Alzheimer Disease (AD), demonstrated the therapeutic efficacy of oral rapamycin. Administration of m-TOR inhibitors (mTOR-Is), early after the clinical onset, greatly diminished cognitive impairment, amyloid angiopathy, intracellular beta Amyloid and neurofibrillary tangles load. The daily intake of rapamycin has always been 2.24g/Kg/24h. In humans the maximal tolerated oral dose is a few milligrams/day, and at this dosage patients are severely immunosuppressed. Thanks to rapalogs’ scarce CNS-related side effects, we administered intracerebroventricularly (ICV) high doses of the mTOR-I everolimus in a mouse model of AD (3xTg-AD) without significant systemic effects. The instability of the liquid formulation at body temperature (BT) made the treatment very short. Nevertheless, the efficacy of the treatment was high and much longer lasting than expected. In order to set up a thermostable, translational liquid formulation of mTOR-Is, we loaded everolimus in distearoylphosphatidylethanolamine-polyethylene glycol 2000 (DSPE-PEG2000) micelles by the thin layer method. The formulation we obtained maintained over 95% of activity after 14 days at BT. We can envision short, potentially periodic ICV treatments in AD patients which replicate results obtained on animal models. The treatment could benefit also Tuberous Sclerosis and Multiple Sclerosis patients.

Background:Fontan completion is the last stage of univentricular repair, which drains the inferior vena cava against gravity to a higher-pressure pulmonary arterial circulation. The passivity and anti-gravity nature of this circulation render a failing Fontan, not an uncommon encounter, twenty years ago, Rodefeld and colleagues, decided to explore the feasibility of vascular pumps to support the passive nature of Fontan circulation, and since then, trials are still ongoing, and we aimed through this review to wrap up the results of these trials. Methods:A literature review has been conducted, to identify any in vivo or in vitro trial of a Fontan assist device. Several outcome parameters determined whether the trial will be included or not in this review, including, the flow rate of a pump if applicable, the number of compressions per minute if a compression device has been used, the resultant flow rate, the inferior and superior vena cava pressures, associated with each setting of the respective device, and any evidence of hemolysis or clotting within the circuit. Results:A total of ten trials have been included, with 23 different settings. Three designs have been identified, out of which two fall within the pump design, namely the connecting chamber and the intravascular pump designs; only one trial explored the possible use of a compression device. The commonest design encountered in in-vivo trials was the intravascular pump (67%). No reports of significant hemolysis or thrombosis were found. An increasing flow rate beyond 5L/min was associated with a negative outcome in the connecting chamber design, increasing upstream pressure in the SVC, while intravascular pumps did not display this limitation. Conclusion:Univentricular heart patients are a relatively small population, with very extensive needs, despite twenty years of trials, no study has yet concluded the optimal design or settings for a Fontan assist device. In this review, we identified that the intravascular pump remains the most practical design, due to its easy mode of insertion, and that it is not faced with the limitation or risk of increasing upstream resistance. There is still a long way to conclude its use as other designs such as compression devices have not yet been fully studied.

Background: medical devices are designed, tested and placed on the market in a highly regulated environment. Wearable sensors are crucial components of various medical devices: design and validation of wearable sensors, if managed according to international standards, can foster innovation while respecting regulatory requirements. Material and methods: the purpose of this paper is to take into consideration the upcoming EU Medical Device Regulation 2017/245 and the current and future IEC and ISO standards that set methods for design and validation of medical devices, with a focus on wearable sensors. Risk classification according to the regulation is described. The international standards IEC 62304, IEC 60601, ISO 14971 and ISO 13485 are reviewed to define regulatory restrictions during design, pre-clinical validation and clinical validation of devices that include wearable sensors as crucial components. Results: current and future regulatory restrictions are described, and an integrated method for design planning, validation and clinical testing is described Discussion: application of this method to design wearable sensors should be evaluated in the future in order to assess its potentially positive impact to fostering innovation and to the time-to-market of the device.

The improvement of health and social care needs the introduction of shared solution at transnational level. The SI4CARE (Social Innovation for Integrated Health Care) project is a transnational initiative within the Adriatic-Ionian regions aiming to develop strategies to improve the current status of health and social care. The Municipality of Miglierina, a small rural town in Calabria, which is a member the project, is developing a pilot action related to the use of wearable device for monitoring people affected by dementia with the project partner Ra.Gi.. Ra.Gi. is a non-profit organization dedicated to assisting people with dementia in day care centers and so-called dementia-friendly communities. The pilot is based on the use of smart wearable devices to monitor these patients during their daily lifetime. This paper focuses on the design and implementation of the system discussing the proposed application, the strengths and weaknesses. Finally, the possibility of extending the experiment to the other Adriatic-Ionian region is presented.

This paper presents a novel framework for Collaborative Learning Networks (CLNs) in classrooms, aiming to optimize resource utilization and enhance educational services. The study addresses the inefficiencies of traditional education models, particularly the underutilization of computational resources and limited access to specialized software. The proposed framework employs a mix of task-based and random allocation strategies to distribute computational tasks within the CLN, considering each device’s capabilities and task requirements. The findings show significant improvement in resource utilization, facilitated by device-to-device collaboration and task sharing, thus enriching students’ learning experiences. This work contributes to optimizing resource utilization in education, advancing the field of CLNs.

Cellular response to mechanical stimuli is a crucial factor for maintaining cell homeostasis. The interaction between extracellular matrix and mechanical stress plays a significant role in organ-izing the cytoskeleton and aligning cells. Tools that apply mechanical forces to cells and tissues, as well as those capable of measuring the mechanical properties of biological cells, have greatly contributed to our understanding of fundamental mechanobiology. These tools have been exten-sively employed to unveil the substantial influence of mechanical cues on the development and progression of various diseases. In this report, we present an economical and high-performance uniaxial cell stretching device. This paper reports the detailed operation concept of the device, ex-perimental design, and characterization. The device was tested with MDA-MB-231 breast cancer cells. Experimental results agree well with previously documented morphological changes re-sulting from stretching forces on cancer cells. Remarkably, our new device demonstrates compa-rable cellular changes within a 30-minute compared to the previous 2-hour stretching duration. Moreover, the device design incorporates an open-source software interface, facilitating conven-ient parameter adjustments such as strain, stretching speed, frequency, and duration. Its versatil-ity enables seamless integration with various optical microscopes, thereby yielding novel insights into the realm of mechanobiology.

Aim: In a human pilot case, we used a root formed temporary prosthetical device (Intra-alveolar Device - IAD), to investigate the effect of mechanical stimulation on hard tissue clinically and radiographically. Background: The extraction of a tooth determines the resorption of the alveolar bone. This determines challenge to place an implant and to integrate the prosthesis in soft tissue. Mechanical stimulation is fundamental for bone tropism but is not understood the effect of mechanical stimulation on post-extraction site. Case presentation: A 24 years old woman was enrolled. The IAD’s were used as expected by protocol. Clinical healing was uneventfully. Vertical radiographical bone resorption measured on CBCT was -0,14mm (5,6%) while horizontal bone resorption was -0,21mm (12,36%). Conclusion: This study demonstrated the feasibility of the proposed model. We need clinical prospectical studies enrolling more patients

Layered halide perovskites have emerged as a promising contender in solid-state lighting thanks to their tunable bandgap, high luminescence quantum yield, and high color purity. However, the fabrication of perovskite light-emitting devices in laboratories usually experiences low de-vice-to-device reproducibility since perovskite crystallization is highly sensitive to ambient condi-tions, such as humidity and temperature. Although device processing inside gloveboxes is primarily used to reduce the influence of oxygen and moisture, several extraneous variables, including gas-eous pollution traces and thermal fluctuations in the inert atmosphere or contaminations from re-sidual solvents confined in the enclosed environment, can destabilize the crystallization process and alter the properties of the emissive layers. Here, we examine different experimental set-ups for spin-coating deposition of layered perovskites in inert atmospheres and their influences on the formation of polycrystalline thin films. Our results demonstrate that fluctuations in the glovebox properties (concentrations of residual O2 and H2O or solvent traces), even in very short timescales, can negatively impact the consistency of the perovskite film formation, while thermal variation plays a relatively minor role in this phenomenon. Furthermore, careful storage of chemical species inside the workstation is critical for reproducing high-quality perovskite layers. Consequently, when applying our most controlled environment for perovskite deposition, the photoluminescence life-time of perovskite thin films shows a standard deviation of only 3%, whereas the reference set-up yields a 15% standard deviation. Regarding complete perovskite light-emitting diodes, the uncer-tainties in statistical luminance and EQE data are significantly reduced from 230% and 140% to 38% and 42%, respectively.

The evolutionary theory of aging, particularly antagonistic pleiotropy (AP), provides an account of the ultimate origins of aging. What remains unclear is the nature of the proximate mechanisms by which AP gives rise to diseases of aging, like cardiovascular disease and Alzheimer’s disease. Damage-centric theories focusing on loss of genetic and cellular function have been proposed, as well as programmatic theories focusing on unwanted gene and cellular function. The latter include the hyperfunction and developmental theory that view aging as the futile continuation, or run-on, of growth and developmental programmes into later life. Yet neither type of theory has performed well in explaining late-life disease aetiology, particularly with respect to disease onset, presentation and progression. What is proposed here in this review is a new programmatic theory of aging. We argue that the emergence of many specific diseases may involve quasi-programmes that are not the result of run-on, but rather are triggered by other factors in late life. Such triggers may be non-programmatic (e.g. infection, mechanical injury) or programmatic. Moreover, the consequent pre-pathological and pathological changes may in some cases trigger further changes, leading to futile and destructive cascades of quasi-programmes and pathology. The origins of triggered quasi-programmes can be traced to biological constraint i.e. the inability of organisms to optimise all functions at once. And, to some extent, the new theory presented here revises the understanding of AP. That is, because any gene can be triggered in an erroneous manner, every gene is potentially an AP gene that risks pathology, though level of risk varies according to constraint. To help validate the theory, we test it against several complex diseases of aging. The new model in this review attempts to provide a blueprint understanding that, to a certain extent, closes the gap in the causal chain of events between evolutionary causes of aging and the aetiology of age-related diseases. It also helps to explain why certain disorders mimic accelerated aging and how interventions, such as the suppression of IIS and mTOR retard many aspects of aging; notably, though, unlike prior programmatic theories, the new theory is not mTOR-centric. Finally, it provides new perspectives on possible treatment of aging.

Ubiquitous computing comprises scenarios where networks, devices within the network, and software components change frequently. Market demand and cost-effectiveness are forcing device manufacturers to introduce new-age devices. Also, the Internet of Things (IoT) is transitioning rapidly from the IoT to the Internet of Everything (IoE). Due to this enormous scale, effective management of these devices becomes vital to support trustworthy and high-quality applications. One of the key challenges of IoT device management is automatic device classification with the logically semantic type and using that as a parameter for device context management. This would enable smart security solutions. In this paper, a device classification approach is proposed for the context management of ubiquitous devices based on unsupervised machine learning. To classify unknown devices and to label them logically, a proactive device classification model is framed using a k-Means clustering algorithm. To group devices, it uses the information of network parameters such as Received Signal Strength Indicator (rssi), packet_size, number_of_nodes in the network, throughput, etc. Experimental analysis suggests that the well-formedness of clusters can be used to derive cluster labels as a logically semantic device type which would be a context for resource management and authorization of resources. This paper fulfills an identified need of proactive device classification for device management.

In this study, the resource blocks (RB) are allocated to user equipment (UE) according to the evolutional algorithms for long term evolution (LTE) systems. Particle Swarm Optimization (PSO) algorithm is one of the evolutionary algorithms, based on the imitation of a flock of birds foraging behavior through learning and grouping the best experience. In previous work, the Simple Particle Swarm Optimization (SPSO) algorithm was proposed for RB allocation to enhance the throughput of Device-to-Device (D2D) communications and improve the system capacity performance. In simulation results, with less population size of M = 10, the SPSO can perform quickly convergence to sub-optimal solution in the 100^th generation and obtained sub-optimum performance with more 2 UEs than the Rand method. Genetic algorithm (GA) is one of the evolutionary algorithms, based on Darwinian models of natural selection and evolution. Therefore, we further proposed a Refined PSO (RPSO) and a novel GA to enhance the throughput of UEs and to improve the system capacity performance. Simulation results show that the proposed GA with 100 populations, in 200 generations can converge to suboptimal solutions. Therefore, with comparing with the SPSO algorithm the proposed GA and RPSO can improve system capacity performance with 1.8 and 0.4 UEs, respectively.

In this study, in order to develop the composition ceramics for the application of ultrasonic transducer device for temporomandibular joint disorder pain relief and facial skin massage, Pb0.88(La0.6Sm 0.4)0.08(Mn 1/3 Sb 2/3)0.02 Ti 0.98 O3 ceramics were manufactured using CuO as sintering aids, and their piezoelectric ,and resonant properties were investigated. At the specimen sintered at 1200 [℃], the excellent values of piezoelectric properties appeared, respectively: the dielectric constant (εr) of 202, piezoelectric constant (d33) of 56[pC/N], first and third overtone electromechanical coupling factor kt of 0.548, kt3 of 0.219, and then first and third overtone mechanical quality factor Qmt1 of 345, Qmt3 of 292 were suitable for the device application such as ultrasonic transducer, respectively. When the length of one side was 7.7 mm, first and third overtone electromechanical coupling factor kt1 of 0.555, kt3 of, 0.196, and then first ,third overtone mechanical quality factor Qmt1 of 381, Qmt3 of 393 , and the first dynamic ratio(D.R) and third overtone dynamic ratio(D.R) of 63.7(dB),and 37.7(dB) were suitable for the device application such as ultrasonic transducer ,respectively .

Internet of Things (IoT) is what we have as a great breakthrough in 5G network. Although 5G network can support several Internet of Everything (IoE) services, 6G is the network to fully support that. This paper is a survey research presenting the 5G and IoT technology and the challenges coming, with the 6G network being the new alternative network coming to solve these issues and limitations we are facing with 5G. A reference to the Control Plane and User Plane Separation (CUPS) is made with IPv4 and IPv6 addressing which is the foundation of the Network Slicing for the 5G core network. Comparing to other related papers, we provide in depth information on how the Internet of Things (IoT) is going to affect our lifes and how this technology is handled as Internet of Everything (IoE) in 6G network. Finally, a full reference is made to the 6G network with its challenges comparing to the 5G network.

Analytical chemistry applied to medical and diagnostic analysis, recently focused on the development of cost-effective biosensors able to monitor the health status or to assess the level of specific biomarkers that can be indicative for several diseases. The improvement of technologies relating to the possibility of non-invasive sampling of biological fluids, as well as sensors for the detection of analytical signals and the computational capabilities of the systems routinely employed in everyday life (e.g. smartphones, computers, etc.), make the complete integration of self-standing analytical devices more accessible. This review aims to discuss the biosensors that have been proposed in the last 5 years focusing on two principal detecting approaches, optical and electrochemical, which have been employed for quantifying different kind of target analytes reaching detection limits below the clinical sample levels required. These detection principles applied to Point-of-care (POC) devices, have been extensively reported in literature and even the limited examples found on the market are based on these strategies. This work will show the latest innovations considering the integration of optical and electrochemical detection with the most commonly reported analytical platforms for POC applications such as paper-based or wearable and implantable devices.

This study aims to understand Filipino rice farmers’ aspirations, both farming and non-farming-related. Understanding aspirations can help the government and interested third-party entities to provide impactful initiatives to farmers. The Role Identity Theory guided our analysis in this study. This study is predominantly qualitative, with focus group discussion as the main method of collecting data. The research sites were in Kalinga, Nueva Ecija, Laguna, Quezon, Northern Samar, Zamboanga del Sur, Sultan Kudarat, and Agusan del Norte. Among the farming-related aspirations noted in this study relate to property, fair price, infrastructure, government support, and good governance. The non-farming related aspirations relate to infrastructure development; progress; government support and governance; love, passion, peace, and unity; wellness and long life.

Copper indium gallium diselenide, Cu(In,Ga)Se2, thin-film of about 1.2 μm has been deposited on Mo coated soda lime glass by thermal co-evaporation of Cu, In, Ga, and Se sources. The thin film CIGS was characterized by energy dispersive spectroscopy (EDS) and identified the elemental composition of Cu, In, Ga and Se in the film. A CIGS device was completed by the successive deposition of multiple layers; SLG/Mo/CIGS/CdS/ZnO/ITO which yielded the efficiency of 11%. External spectroscopic ellipsometry (ex-situ SE) was performed on the completed device and the device analysis was performed. Starting with the parameterized complex dielectric functions of the individual component layers, SE analysis was performed using a step-wise procedure that ranks the fitting parameters according to their ability to reduce the mean square error (MSE) of the fit. The resulting layer thicknesses and dielectric functions were used to simulate the external quantum efficiency (EQE) of the device assuming complete active layer collection. Electronic losses were identified by comparison of simulated EQE with the measured EQE. The ultimate goal of this work is the optimization of narrow band-gap CIGS-related solar cells for the bottom layer in tandem devices.

Atherosclerosis is a dynamic, chronic and progressive process that involves the vascular bed (coronary and peripheral). Risk factors are associated with the progression rate and with the evolution of atherosclerosis. There are traditional risk factors and non-traditional risk factors, all of them lead to endothelial dysfunction. Endothelial dysfunction plays a key factor in atherosclerosis. It accompanies hypercholesterolemia, diabetes, hypertension, cigarette smoking – leading to the development of atherosclerosis. Endothelial dysfunction can be reversed by treating hyperlipidemia and other damaging processes, and the mechanism is believed to be associated with an increase in vascular endogenous NO. PAD is a devastating disease, leading to leg pain and amputation. Until now the optional treatments don’t cure or prevent the uneventful outcome, but may slow the downhill progression. We summarize the updated knowledge of the management of PAD and suggest a novel approach to treat patients with PAD, using stem cells technology and a special novel endovascular device that will deliver the cells continuously on the long run and may halt the progression of atherosclerosis or even cure PAD.

Abstract Purpose Since their introduction, intrauterine devices (IUDs) have been associated with various complications. Avery rare complication is the perforation of the cervix by the strings of the IUD. Purpose of the current study is to present a novel case of cervical perforation by the strings of a copper IUD and to perform a systematic review of the literature. Materials and Methods The patient a 43-year-old attended the gynecology clinic in order to remove her copper IUD. Speculum examination revealed that both the strings of the IUD perforated the anterior lip of the cervix. Management options were offered, the patient opted for a hysteroscopic removal. We searched the electronic databases: MEDLINE, Cochrane Library,Google Scholar,EBSCO for similar cases. Results Electronic search yielded 1821 articles; 8 were selected for inclusion. Mean age of the women was 35,37±7,781, range (26-47) years. One woman (12.5%) was nulligravida;3 women were multigravida (37,5%). Seven women (87,5%) were asymptomatic. Three IUDs (37,5%) were LNG-IUS; 5 IUDs (62,5%) contained copper. Conclusions Cervical perforation by the strings of IUD is an extremely rare clinical entity. It is asymptomatic in general and in most cases the strings of the IUD may be returned back to the endocervical canal after surgical maneuvers.

Background Acute right heart failure (RHF) is associated with high morbidity and mortality. Temporary mechanical circulatory support (tMCS) is now part of the advanced management strategy for refractory cardiogenic shock (CS). Among such support systems, VA-ECMO remains the fastest MCS system to set up. The ProtekDuo cannula can be used as a temporary and percutaneous right ventricular assist device (RVAD) in relay with VA-ECMO in the context of prolonged weaning. Case Summary This case report describes the clinical course of a 69-year-old patient who underwent elective aortic valve replacement surgery complicated by acute RHF due to iatrogenic ligation of the right coronary artery. VA-ECMO was initiated in the context of refractory cardiogenic shock. Faced with prolonged MCS weaning, due to lack of recovery of the right ventricle associated with the absence of any other therapeutic option, a percutaneous RVAD via a ProtekDuo cannula was implanted as a bridge to recovery. The ProtekDuo was gradually weaned while the patient began rehabilitation. The patient was transferred to the medical ward after 5 weeks in the ICU, stayed 5 months in an acute medical setting, went to a rehabilitation center afterward and returned home 6 months after the initial surgery without any neurological sequalae or organ failures. In total, she remained on MCS for 39 days (21 on VA-ECMO and 18 on ProtekDuo). Discussion In cases of refractory RHF, after stabilization and organ perfusion restoration under VA-ECMO, it is feasible to switch to a percutaneous RVAD, allowing early mobilization of patients during prolonged MCS weaning until the right ventricle adapts to new loading conditions.

The concept of the protein powder dispenser was developed on the basis of the results of analyses, studies and customer requirements. The dispenser was assembled using SolidWorks software, which consists of 63 elements, 14 of which are unique parts that are not available on the market. Each part of the dispenser was carefully designed to be injected into the plastic compound. Polypropylene is the perfect material for this dispenser as it is low density, waterproof, insoluble and extremely resistant to tension and bending. High purity propylene polymer can be processed into a tough, rigid and lightweight plastic with relatively low manufacturing costs, replacing expensive materials. The authors' original contributions are the design and manufacture of a dosing device for protein powder, adjustable in 3 heights to be able to dose in containers of different sizes; the design and integration of a mechanism with a precise dosing system, the components being designed so that the parts in contact with the shaft filled with protein powder form a perfectly closed space; the design and integration of the mechanism for adjusting the height of the dispenser.

Consideration of the individual bone characteristics of the wrist plays a key role in well-functioning biomedical devices and successful surgical procedures. Although geometric differences and individual bone sizes have been analyzed in the literature, detailed morphologic descriptions and correlations covering the entire wrist reported in a clinical context are lacking. This study aimed to perform a comprehensive and automatic analysis of wrist morphology using the freely available “Open Source Carpal Database” (OSCD). We quantified the dimensions of each of the individual carpal bones and their combination. These dimensions were extracted in n=117 datasets of the wrist of the OSCD in anatomical directions and analyzed using descriptive statics and correlation analysis to investigate morphological characteristics under gender-specific aspects. We found that there exist statistical differences between genders, and we concluded that gender specificity is an important variable affecting the utilization of biomedical device designs and clinical treatment.

We examine here the conductance changes associated with the change in spin state in a variety of different structures, using the example of the spin crossover complex [Fe(H2B(pz)2)2(bipy)] (pz= (pyrazol-1-yl)-borate and bipy = 2,2’-bipyridine) and [Fe(Htrz)2(trz)](BF4)] (Htrz = 1H-1,2,4-triazole) thin films . This conductance change is highly variable depending on the mechanism driving the change in spin state, the substrate and the device geometry. Simply stated, the choice of spin crossover complex used to build a device is not the only factor in determining the change in conductance with the change in spin state.

The paper first compares the turn-off performance of two package solutions (3-lead vs 4-lead) in Super-Junction MOSFETs. It is commonly assumed that the better performance (lower switching losses) of the 4-lead is obtained thanks to the decoupling of the power and driving loop. On the contrary, in this work, the experimental results, circuit models, and Kirchhoff laws have shown that the turn-off improvement (lower turn-off losses) obtained by adopting the Kelvin source is due to the lower inductance of the driver loop in comparison with the power loop inductance, instead of the decoupling between these loops.

MAD is the gold standard therapy for mild/moderate OSA and is a second-choice treatment in patients with severe OSA not responding to CPAP. The aim of this study was to analyze the upper airway characteristics of OSA patients and the morphological changes in the upper airway, inducted by four different types of mandibular advancement devices, using CBCT 3D imaging. Twenty-two patients were recruited after OSA diagnosis with polysomnography. Four different customized and titratable MAD were used and an initial CBCT scan was obtained for each patient. After 6 months to the end of the MAD titration phase, all the subjects showed an AHI of &lt; 5 or a decrease of 50% in AHI with MAD when compared with initial AHI and a second CBCT scan with MAD in situ was performed. An important improvement of the airway was observed (+33.76%) and a significant difference in the enlargement ratio between the posterior soft palate (+32.41%) and the posterior tongue (+36.96%) region was also found. The greatest increase in airway volume was achieved in patients treated with the MAD Forward and TAP (respectively +42.77% and + 41.63%). MAD therapy is effective to treat mild/severe OSA with increased upper airway volume. The design of the MAD can influence the effectiveness of the treatment.

The success of total hip arthroplasty depends on the experience of the surgeon, and one of the ways the surgeon currently determines the final implant insertion depth is to listen to the change in audible pitch of the hammering sound. We investigated the use of acoustic vibration emissions as a novel method for insertion quality assessment. A non-invasive contact microphone-based measurement system for insertion depth estimation, fixation and fracture detection was developed using a simplified in vitro bone/implant (n=5). 2583 audio recordings were analysed in vitro to obtain energy spectral density functions. Out of the four main resonant peaks under in vitro conditions, broach insertion depth statistically correlates to increasing 3rd and 4th peak frequencies. Degree of fixation was also observed as higher goodness of fit (0.26-0.78 vs. 0.12-0.51 between two broach sizes, the latter undersized). Finally, however, the moment of fracture could not be predicted. A cadaver in situ pilot study suggests comparable resonant frequencies in the same order of magnitudes with the bone model. Further understanding of the signal patterns are needed for an early warning system diagnostic system for imminent fractures, bone damage, improving accuracy and quality of future procedures.

Microfluidic devices have been extensively investigated in recent years in fields including ligand-binding analysis, chromatographic separation, molecular dynamics, and DNA sequencing. To prolong the observation of a single molecule in aqueous buffer, the solution in a sub-micron scale channel is driven by the electric field and reversed after a fixed delay following each passage, so that the molecule passes back and forth through the laser focus and the time before irreversible photobleaching is extended. However, this practice requires complex chemical treatment to the inner surface of the channel to prevent unexpected sticking to the surface and the confined space renders features, such as a higher viscosity and lower dielectric constant, which slow the Brownian motion of the molecule compared to the bulk liquid. In this paper, we have fixed a capillary microchannel with an inner diameter of 2 microns on top of a piezo stage to recycle the molecule and collected the fluorescence by a confocal microscope. The passing times of the molecule through the laser focus are calculated by a real-time control system based on an FPGA and the commands of translation are given to the piezo stage through a feedback algorithm. We have achieved a maximum number of recycles of more than 200 and developed a maximum-likelihood estimation of the diffusivity of the molecule, which attains results of the same magnitude as previous reports. This technique simplifies the overall procedure of the single-molecule recycling and could be useful for the ligand-binding studies of biomolecules.

The application of electrode-based microfluidic devices in biological entity often imposes a problem due to joule heating. The strong applied potentials or micro channels having narrow cross sections generate undesirable temperature inside the microfluidic channels leading to strong thermal distribution inside the micro channel. When intrinsic distribution of temperature, if not fix with threshold value, causes device damage or cell loss. In this work, we investigate the effects of temperature generated due to joules heating effects and we attempt to address the design constraints for minimizing the joule heating effects in the microfluidic device for developing effective microfluidic device. The device reliability was analyzed under different parametric constraints for various types of substrate materials (PDMS, PMMA, Polyimide and glass). We also attempt to investigate the effects of cell reliability due to strong temperature gradients generated through different applied potentials on different cell types. Furthermore, the response of the device performance due to different electrode configuration and different conductivity of the medium was also studied. Our investigation will eventually provide guidelines for microfluidic researchers to fabricate efficient electrode based microfluidic device which will ultimately help to choose a critical channel dimensions, threshold potentials, and conductivity of solutions in order to avoid device damage and cell loss.

To compare surgical and refractive outcomes between phacotrabeculectomy (P-Trab) and phaco with Ex-PRESS (P-Ex-PRESS) for glaucoma at 6-month follow-up. This prospective randomized controlled trial included 81 eyes; 43 (53%) and 38 (47%) were assigned to the P-Ex-PRESS and P-Trab groups, respectively. Refraction, intraocular pressure (IOP), and best-corrected visual acuity were measured. Refractive change was described by analyzing the magnitude of the cylinder, and polar analysis assessed the change in trend of astigmatism [with-the-rule, against-the-rule (ATR), oblique] evaluating mean astigmatism in centroid form. All patients showed statistically significant postsurgical decrease in IOP (P&lt;0.05). There were no differences neither between the groups for postoperative IOP or visual outcomes, nor in astigmatism before or after surgery (P=0.61, P=0.74). In both groups, the mean pre- and postoperative astigmatism was ATR and OBL, respectively. Pre- and postoperative centroids in the P-Ex-PRESS group were 0.44±1.32 D at 177˚ and 0.35±1 D at 8˚, respectively, (P=0.5) and in the P-Trab group, 0.16±1.5 D at 141˚ and 0.39±1.38 D at 29˚, respectively (P=0.38). Both P-Ex-PRESS and P-Trab showed comparable antihypertensive efficacy in treating open-angle glaucoma in a 6-month period. Pre- and postoperative astigmatism did not differ between groups. The groups showed comparable results for final visual acuity.

The technological development of piezoelectric materials is crucial for developing wearable and flexible electromechanical devices. There are many inorganic materials with piezoelectric effects, such as piezoelectric ceramics, aluminum nitride, and zinc oxide. They all have very high piezoelectric coefficients and large piezoelectric response ranges. The characteristics of high hardness and low tenacity make inorganic piezoelectric materials unsuitable for flexible devices that require frequent bending. Polyvinylidene fluoride (PVDF) and its derivatives are the most popular materials used in flexible electromechanical devices in recent years and have high flexibility, high sensitivity, high ductility, and a certain piezoelectric coefficient. Owing to increasing the piezoelectric coefficient of PVDF, researchers are committed to optimizing PVDF materials and enhancing their polarity by a series of means to further improve their mechanical–electrical conversion efficiency. This paper reviews the latest PVDF-related optimization materials, related processing and polarization methods, and the applications of these materials such as those in wearable functional devices, chemical sensors, biosensors, and flexible actuator devices for flexible micro-electromechanical devices. We also discuss the challenges of wearable devices based on flexible piezoelectric polymer, consider where further practical applications could be.

The combined ecological, geophysical, climatic, and social factors of the Northeast of Russia influence the organism from the early childhood being too intense for the functional systems. The purpose of the research is to study the emotional characteristics of adolescents of different ethnic groups in the northeast of Russia. Presented in the paper are results of the study that covered 826 adolescents (445 females and 381 males) at the age of 15–17, different by ethnic origin. We used standard methods of psycho-diagnostics. Our study has showed that the formation of the adolescents’ emotional sphere in the North is undoubtedly influenced not only by the climatic and socio-economic environmental factors but also by ethnic features. There are intergroup differences in the aggressiveness profile of older adolescents living in the remote settlement vs. the regional center. It is shown that high school students in the remote settlement of Evensk, compared to their peers in Magadan, regardless of gender and ethnicity, are characterized by more pronounced hostile and auto-aggressive reactions. In adolescents of the Aboriginal population, as compared with their age mate Caucasians, the indicators of impairment in the field of Neuro Psychic Adaptation, Situational and Personal Anxiety, and Social Frustration are significantly more pronounced.

The present state of research in Computational Fluid Dynamics (CFD) is marked by an ongoing process of refining numerical methods and algorithms with the goal of achieving accurate modeling and analysis of fluid flow and heat transfer phenomena. Remarkable progress has been achieved in the domains of turbulence modeling, parallel computing, and mesh generation, resulting in heightened simulation precision when it comes to capturing complex flow behaviors. Nevertheless CFD faces a significant challenge due to the time and expertise needed for meticulous simulation setup and intricate numerical techniques. To surmount this challenge, we introduce paint2sim—an innovative mobile application designed to enable on-the-fly 2D fluid simulations using a device’s camera. Seamlessly integrated with OpenLB, a high-performance Lattice Boltzmann-based library, paint2sim offers accurate simulations. The application leverages the capabilities of the Lattice Boltzmann Method (LBM) to model fluid behaviors accurately. Through a symbiotic interaction with the open-source OpenCV library, paint2sim can scan and extract hand-drawn simulation domains, affording the capability for instant simulation and visualization. Notably, paint2sim can also be regarded as a digital twin, facilitating just-in-time representation and analysis of 2D fluid systems. The implications of this technology extend significantly to both fluid dynamics education and industrial applications, effectively lowering barriers and rendering fluid simulations more accessible. Encouragingly, the outcomes of simulations conducted with paint2sim showcase promising qualitative and quantitative results. Overall, paint2sim offers a groundbreaking approach to mobile 2D fluid simulations, providing users with just-in-time visualization and accurate results, while simultaneously serving as a digital twin for fluid systems.

Purpose: Glaucoma is the second leading cause of blindness, however, it remains incurable even with the appropriate treatment. Intraocular pressure (IOP) reduction is currently the only proven method to decline glaucoma progression. When medical therapy fails, surgical treatment usually arises as the solution to a better IOP control. Nevertheless, its success is compromised by frequent post-operative complications, most of them due to excessive fibrous tissue formation during wound healing process. Nanotechnology devices for glaucoma surgery can improve post-operative IOP control and reduce undesirable fibrosis. This systematic review aims to summarize some advances of nanotechnology application to ophthalmology, giving an overview about the state of the art of the nanotechnology based glaucoma drainage devices. Methods: A literature search in the PubMed/Medline database was performed using the keywords: “glaucoma surgery”, “glaucoma drainage device”, “nanotechnology”, “nanoparticles”, “nanomedicine” and “valve”. Were included articles published until March 1, 2023. A first identification of relevant articles was done through the title and abstract’s information, and a second selection was done by full-text articles assessment. Seven articles were included in this systematic review. Results: Nanotechnology-based glaucoma drainage devices included in this review promise to overcome the challenges of glaucoma surgical treatment by allowing a more effective control over post-operative scarring, a noninvasive and customized control of aqueous humour (AH) drainage while achieving optimal IOP reduction through all phases of the post-operative period. Conclusion: Despite the decreased post-operative complications and apparently enhanced biocompatibility of nano-based drainage devices, further in vivo tests and human studies are needed to evaluate cytotoxicity and corroborate the biocompatibility and efficacy showed in the initial testing results of these devices.

Dilated cardiomyopathy (DCM) is a common form of cardiomyopathy, characterized by ventricular chamber dilatation and systolic dysfunction, in the absence of coronary artery disease, arterial hypertension, valvular or congenital diseases. DCM is a heterogeneous group of disorders of the myocardium caused by genetic factors, environmental factors, or a combination of both. DCM affects mainly men aged between 20 and 50 years, being considered one of the main causes of heart failure (HF) and the main indication for heart transplantation. Guideline-based HF treatment is the mainstay of management for patients with DCM. In recent years, gene therapy and induced pluripotent stem cells have become promising strategies. In this review, we summarize the relevant clinical issues, and current treatment of DCM patients, including the role of genetic evaluation.

Heart rate variability (HRV) is a measurement of the fluctuation of time between each heartbeat and reflects the function of the autonomic nervous system. HRV is an important indicator for both physical and mental status and for broad-scope diseases. In this review, we discuss how wearable devices can be used to monitor HRV, and we compare the HRV monitoring function among different devices. In addition, we have reviewed the recent progress in HRV tracking with wearable devices and its value in health monitoring and disease diagnosis. Although many challenges remain, we believe HRV tracking with wearable devices is a promising tool that can be used to improve personal health.

Wearable exoskeleton solutions for upper limb rehabilitation or assistance, particularly for the hand area, have become increasingly attractive to researchers, proving to be effective over time in treating hand movement impairments following various neurological diseases. In the present work, the development of a wearable exoskeleton-type device for active hand rehabilitation has been addressed, based on fluid actuators made of elastomeric material and on myoelectric control by capturing myoelectric signals from the forearm area. The flexion movement of the fingers (phalanges) is actively assisted by pneumatic actuation of the built-in actuators and the extension movement is assisted by a depressurization control of the actuator. The device has been designed to be as easy to use as possible, light in weight, and to provide a high degree of comfort when used by the patient for rehabilitation training or daily life activities (ADL), which can be performed in the comfort of one's own home.

In the modern world, stress has become a pervasive concern that affects individuals' physical and mental well-being. To address this issue, many wearable devices have emerged as potential tools for stress detection and management, by measuring heart rate, heart rate variability (HRV), and various matrices related to it. This literature review aims to provide a comprehensive analysis of existing research on HRV tracking and Biofeedback using smartwatches and finger monitor/sensor pairing with reliable 3rd party mobile apps like Elite HRV, Welltory, and HRV4Training specifically designed for stress detection and management. we apply various algorithms and methodologies employed for HRV analysis and stress detection is discussed, including time-domain, frequency-domain, and non-linear analysis techniques. Prominent smartwatches, such as Apple Watch, Garmin, Fitbit, Polar, and Samsung Galaxy Watch, are evaluated based on their HRV measurement accuracy, data quality, sensor technology, and integration with stress management features. We describe the efficacy of smartwatches in providing real-time stress feedback, personalized stress management interventions, and promoting overall well-being. To assist researchers, doctors, and developers use smartwatch technology to address stress and promote holistic well-being, we discuss the data's advantages and limitations, future developments, and the significance of user-centered design and personalized interventions. Keywords: smartwatch; stress; wearable device; heart rate variability; comparative analysis

In the present work we have investigated an organic semiconductor based on tris(8-hydroxyquinoline) aluminum (AlQ3) doped with tetracyanoquinodimethane (TCNQ), which can be used as a photoactive layer in organic light-emitting device (OLED). DFT calculations were carried out to optimize the structure of semiconductor species and get related constants in order to compare experimental and theoretical results. The semiconductor AlQ3-TCNQ was structurally characterized and their experimental IR spectrum was compared with that obtained through DFT calculations. Subsequently, AlQ3-TCNQ films with polypyrrole (PPy) matrix were fabricated, they were morphologically and mechanically characterized by Scanning Electron and Atomic Force Microscopy techniques. The maximum stress for the film is 8.66 MPa and the Knoop hardness is 0.0311. The film was analyzed in its optical behavior and the optical properties of hybrid film were found to exhibit two indirect allowed transitions at 2.64 and 3.44 eV. Finally, an OLED type was fabricated that was electrically characterized. Applying a cubic-spline approximation to fit cubic polynomials to the J-V curves, the ohmic to SCLC transition voltage VON and the trap-filled-limit voltage VTFL for the device were obtained. Then, the free carrier density and trap density for the device were approximated to n0=2.4787×10171m3 and Nt=1.7419×10291m3 respectively.

Threshing device is the core component of grain combine harvester, and its working performance determines the working quality and production efficiency of the harvester to a great extent. The straw guide plate plays an important role in the threshing device to dredge the threshing matter and control the threshing time of the combine harvester matter in the threshing chamber. In the past, the guiding structure of threshing device could not optimize the working performance of the machine by adjusting the spiral angle, that is, most cereal combine harvester may not be fed smoothly or even clogged when operating under different crop types, yield differences and operating environments, a kind of threshing device with adjustable guide straw board was studied. In this study, the movement model of the straw on the straw guide plate was analyzed, and it was found that the spiral angle “α”of the straw guide was 0<α<58°.Three-factor and three-level response surface method was used to carry out field experiment on drum speed, working speed and guide grass plate spiral angle, and the experimental data were analyzed by quadratic polynomial regression.The results show that the drum speed, working speed and the spiral angle of the guide grass plate have significant effects on the loss rate (PLR) , impurity content (PIR) and breakage rate (PBR) , the drum speed and working speed have an interactive effect on the impurity ratio (PIR) , and the working speed and the helical angle of the guide grass plate have an interactive effect on the loss ratio (PLR) and breakage ratio (PBR) , there is an interaction between the rotary speed of the roller and the helical angle of the guide grass plate on the crushing rate (PBR) .Further optimization analysis showed that the predicted value was PLR = 1.18% , PIR = 0.72% , PBR = 0.53% , the experimental verification value was PLR = 1.26% , PIR = 0.73% , PBR = 0.61% . The absolute error between the experimental value and the predicted value was very small, however, the optimized field test verified value decreased by 8.31% , 50.04% and 60.30% respectively, which indicated that the optimized harvester had better operation quality, in particular, PIR, PBR and other two indicators have a greater increase in the effect.

Purpose: To construct a hidden Markov model (HMM) for vigilance assessment to improve the real-time performance and accuracy of current vigilance measurement. Methods: ECG signal was collected by sensors, while the noise and baseline drift was eliminated from the original ECG signal. 10 volunteers were randomly selected. Their heart rate variability (HRV) were measured and trained parameters of the modified Hidden Markov model for vigilance assessment. Then, these data were collected to optimize using the Baum-Welch algorithm and obtained the state transition probability matrix A ̂ and the observation probability matrix B ̂. Finally, the data of three volunteers with different transition patterns of mental state were selected randomly and used the Viterbi algorithm to find the optimal state, which compared with the actual state. Results: The constructed vigilance assessment model had a high accuracy rate the accuracy rate of data prediction for these three volunteers exceeded 80%. Conclusion: The Hidden Markov model for vigilance assessment can accurately predict the vigilance level and indicate broad application prospects.

This paper reports the design, development, and testing of a novel, yet simple and low-cost portable device for the rapid detection of SARS-CoV-2. The device performs loop mediated isothermal amplification (LAMP) and provides visually distinguishable images of the fluorescence emitted from the samples. The device utilises an aluminium block embedded with a cartridge heater for isothermal heating of the sample and a single-board computer and camera for fluorescence detection. The device demonstrates promising results within 20 minutes using clinically relevant starting concentrations of the synthetic template. Time-to-signal data for this device are considerably lower compared to standard qPCR machine (~10-20 minutes vs &gt;38 minutes) for 1×105 starting template copy number. The device in its fully optimized and characterized state can potentially be used as simple to operate, rapid, sensitive, and inexpensive platform for population screening as well as point-of-need SARS-CoV-2 detection and patient management.

We report on an immunofluorescent paper-based assay for the detection of severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper-based device was fabricated by using lamination technique for easy and optimized handling. Our approach utilises a two-step strategy that involves (i) initial coating of the paper-electrode with recombinant SARS-CoV-2 nucleocapsid antigen to capture the target SARS-CoV-2 specific antibodies, and (ii) subsequent detection of SARS-CoV-2 antibodies using fluorophore-conjugated IgG antibody. The fluorescence readout was observed with fluorescence microscopy. The images were processed and quantified using a MATLAB program. The assay can selectively detect SARS-CoV-2 humanized antibodies spiked in PBS and healthy human serum samples with the relative standard deviation of approximately 6.4% (for n = 3). It has broad dynamic ranges (1 ng to 50 ng/µL in PBS and 5 to 100 ng/µL in human serum samples) for SARS-CoV-2 humanized antibodies with the detection limits of 2 ng/µL (0.025 IU/mL) and 10 ng/µL (0.125 IU/mL) in PBS and human serum samples, respectively. We believe that our assay has the potential to be used as a simple, rapid, and inexpensive paper-based diagnostic device with a portable fluorescent reader to provide point-of-care diagnosis. This assay can be used for rapid examination of a large batch of samples toward clinical screening of SARS-CoV-2 specific antibodies as a confirmed infected active case or to evaluate the immune response to a SARS-CoV-2 vaccine.

The wide interest in developing green energy technologies stimulates the scientific community to seek, for devices, new substitute material platforms with low environmental impact, ease of production and processing and long-term stability. The synthesis of metal oxide (MO) semiconductors fulfils these requirements and efforts are addressed at optimizing their functional properties, through improvement of charge mobility or energy level alignment. Two MOs have rising perspectives for application in light harvesting devices, mainly for the role of charge selective layers but also as light absorbers, namely MoO3 (an electron blocking layer) and Co3O4 (a small band gap semiconductor). The need to achieve better charge transport has prompted us to attempt doping strategies with vanadium (V) ions that, when combined with oxygen in V2O5, produce a high work function MO. We report on subcritical hydrothermal synthesis of V-doped mesostructures of MoO3 and of Co3O4, in which a tight control of the doping is exerted by tuning the relative amounts of reactants. We accomplished a full analytical characterization of these V-doped MOs that unambiguously demonstrates incorporation of the vanadium ions in the MO crystal lattice, as well as effects on the optical properties and work function. We foresee a promising future use of these materials as charge selective materials in energy devices based on multilayer structures.

Paper-based microfluidic analysis devices (μPADs) have attracted attention as a cost-effective platform for point-of-care testing (POCT), food safety, and environmental monitoring. Recently, three-dimensional (3D)-μPADs have been developed to improve the performance of μPADs. For accurate diagnosis of diseases, however, 3D-μPADs need to be developed to simultaneously detect multiple biomarkers. Here, we report a 3D-μPADs platform for the detection of multiple biomarkers that can be analyzed and diagnosed with a smartphone. The 3D-μPADs were fabricated using a 3D digital light processing printer and consisted of a sample reservoir (300 µL) connected to 24 detection zones (of 4 mm in diameter) through 8 microchannels (of 2 mm in width). With the smartphone application, eight different biomarkers related to various diseases were detectable in concentrations ranging from normal to abnormal conditions: glucose (0–20 mmol/L), cholesterol (0–10 mmol/L), albumin (0–7 g/dL), alkaline phosphatase (0–800 U/L), creatinine (0–500 µmol/L), aspartate aminotransferase (0–800 U/L), alanine aminotransferase (0–1000 U/L), and urea nitrogen (0–7.2 mmol/L). These results suggest that 3D-µPADs can be used as a POCT platform for simultaneous detection of multiple biomarkers.

The popularity of multiparticulate formulations (MPs) as a paediatric dosage form continues to increase. MPs comprise of multiple small units that are easy-to-swallow. Currently, MPs are commonly manufactured into unit doses that are either swallowed whole or opened prior to administration. While this is an acceptable approach, dosing is envisioned to be optimized with a ‘standard’ paediatric device which can better harness the flexible dosing potential of MPs. We evaluated a novel oral syringe (SympfinyTM) that is being developed as a tool to dispense and administer MPs to children. Forty children, 4-12 years old, received 0.5, 1.2, and 2.0 mL doses of placebo MPs using the oral syringe with spring water or a drink of choice to complete sample intake. Acceptability was recorded as those able to completely swallow the dose and participants also rated dose acceptability on a 5-point scale. The ability to completely swallow the dose decreased as dose volume increased; the smallest dose was completely swallowed by 87.5% (35/40) children, and 69.4% (27/39) of children confirmed their willingness to take the sample as a daily medicine. Larger doses, 1.2 and 2.0 mL, gave values of 55% and 57.5% for the doses completely swallowed and 58.8% and 51.72% for willingness to take the sample as a daily medicine, respectively. Use of a drink of choice showed no increase in swallowability as compared with water. The novel oral syringe being developed is an appropriate device for dispensing doses flexibly and administering neutral tasting MPs directly to the mouth in the lower dose range without the need for a co-administration vehicle in children aged 4-12 years.

The application of Virtual Reality in a driving simulation is not novel, yet little is known about the use of this technology by senior populations. The effects of age, sex, control device (joystick or handlebar), and task type on wayfinding proficiency using a virtual reality (VR) driving simulation were explored. The driving experimental model involved 96 randomly recruited participants, including 48 young people and 48 seniors (split evenly by gender in each group). The experimental results and statistical analyses indicate that in a VR driving scenario task type significantly affected VR driving performance. Navigational scores were significantly higher for the straight (easy) task than for the curved (difficult) task. The aging effect was the main reason for significant and interacting effects of sex and control device. It was found that interactions between age and sex difference indicated that the young group exhibited better wayfinding performance than the senior group, and in the young group males had better performance than females. Similarly, interactions between age and control device indicated that the handlebar control device type resulted in better performance than the joystick device in the young group, but no difference was found in the senior group due to age or learning effects. Findings provide an understanding of the evaluation of the interface designs of navigational support systems, taking into consideration any effects of age, sex, control device, and task type within three-dimensional VR games and driving systems. With a VR driving simulator, seniors can test drive inaccessible products, such as electric bicycles or cars, using a computer at home.

Sleep postures monitoring systems in the hospital aim at transforming sensing signals into quantitative data to characterize the sleep behaviors of the patient. However, a home-care sleep posture monitoring system needs to be user friendly. In this paper, we present iSleePost - a user-friendly home-care intelligent sleep posture monitoring system. We address the labor-intensive labeling issue of traditional machine learning approaches in the training phase. Our proposed mobile health (mHealth) system leverages the communications and computation capabilities of mobile phones for provisioning a continuous sleep posture monitoring service. Our experiments show that iSleePost can achieve 90 percent accuracy in recognizing sleep postures. More importantly, iSleePost demonstrates that an easily-wear wrist sensor can accurately quantify sleep postures.

In this paper, we present a study of various ZnO/SiO2-stacked thin film structures for flexible micro-energy harvesting devices. Two groups of micro-energy harvesting devices, SiO2/ZnO/SiO2 micro-energy generators (SZS-MGs) and ZnO/SiO2/ZnO micro-energy generators (ZSZ-MGs), were fabricated by stacking both SiO2 and ZnO thin films, and the resulting devices were characterized. With a particular interest in the fabrication of flexible devices, all the ZnO and SiO2 thin films were deposited on ITO-coated PEN substrates using an RF magnetron sputtering technique. The effects of the thickness and/or position of the SiO2 films on the device performance were investigated by observing the variations of output voltage in comparison with that of a control sample. As a result, compared to the ZnO single-layer device, all the ZSZ-MGs showed much better output voltages, while all the SZS-MG showed only slightly better output voltages. Among the ZSZ-MGs, the highest output voltages were obtained from the ZSZ-MGs where the SiO2 thin films were deposited using a deposition power of 150 W. Overall, the device performance seems to depend significantly on the position as well as the thickness of the SiO2 thin films in the ZnO/ SiO2-stacked multilayer structures, in addition to the processing conditions.

A pump station is a very important flood control facility for mitigating inundation of urban lowland areas. It is not easy to secure a site to increase the capacity of a pump station in an urban area because of various limitations or to maximize the discharge capacity of the pump sump. Adding a facility to improve the pump capacity of a pump station may affect the flow characteristics, such as unexpected increases in the flow velocity and vorticity, and cause severe problems with operating the pump station. To solve those problems, anti-vortex devices (AVDs) have been developed and adopted for appropriate design standards. The Korean design criteria for AVDs are based on experience and foreign standards because not enough data on the AVD are available. In this study, the flow in the sump was numerically simulated at various AVD heights to collect information on improving the design and efficiency of a pump station. Consequently, an appropriate height for the AVD and changes in the flow pattern and vortex in the pump sump were determined and compared with 12 cases of inflow conditions with respect to the vertical location.

Currently, hepatitis B virus (HBV) core antibody (anti-HBc antibody) and HBV core-related antigen (HBcrAg) are widely used as serum markers for diagnosis based on the HBV core region. While anti-HBc is very significant for clinical diagnosis, the clinical significance of quantitative assay of anti-HBc antibody has been reevaluated with improvements in diagnostic performance, including its association with clinical stage and prediction of carcinogenesis and reactivation. In addition, concerning the new HBcrAg, a high-sensitivity assay method has recently been established, and its diagnostic significance, including the prediction of reactivation, is being reevaluated. On the other hand, the quantitative level of anti-HBc antibody expressed in different units among assay systems, complicating the interpretation of the results. However, it is difficult to standardize assay systems as they vary in advantages, and caution is needed in interpreting the assay results. In this review, the clinical usefulness and remaining problems of anti-HBc antibody and HBcrAg were summarized.

This study investigated gender differences in exposure to hazardous factors, health problems, and work environment satisfaction and identified the effects of such differences on farmworkers in Korea. Through the 6th Korean Working Conditions Survey (KWCS) conducted by the Occupational Safety and Health Research Institute (OSHRI), the raw data on 2,347 farm-workers were analyzed to present descriptive statistics for demographic characteristics, exposure to hazardous factors, health problems, and work environment satisfaction. We compared be-tween genders using chi-squared tests and investigated the effects of gender-specific working conditions on work-related health problems and work environment satisfaction using multi-variate logistic analysis. The results were presented as an odds ratio (OR) with 95% confidence interval. Job position predicted work-related health problems in male farmworkers and work environment satisfaction in female farmworkers. Furthermore, female farmworkers perceived themselves to have more health problems than male farmworkers. Nevertheless, female farm-workers received less health and safety information and had lower work environment satisfac-tion compared to male farmworkers. The findings may improve the occupational welfare of farmworkers through continuous enhancement of the agricultural labor environment. Keywords: work-related; working condition; farmworker; agriculture; musculoskeletal; KWCS

Background and Objectives: The current study aimed to determine the impact of fasciotomy on mortality and morbidity in children and adults with crush-related AKI following the 2023 Kahramanmaraş earthquakes. Materials and Methods: The study included individuals who had suffered crush injuries after the 2023 Kahramanmaraş earthquakes and were identified as having acute kidney injury (AKI). Patients with AKI were divided into two groups based on age: those under 18 years and those over 18 years. A comparative analysis was conducted between the mortality and morbidity rates of patients who underwent fasciotomy and those who did not. Disseminated intravascular coagulopathy (DIC), sepsis, and adult respiratory distress syndrome (ARDS) have all been identified as contributors to morbidity. Results: The study was conducted with a total of 40 patients (21 males and 19 females) aged between four and 83 years. A total of 21 patients underwent fasciotomy and the patients underwent varying numbers of fasciotomy, ranging from zero to 11. The mortality rate was 12.5%, corresponding to five adult patients. No instances of mortality were reported in the paediatric cohort. The application of fasciotomy in instances of crush-induced AKI did not result in elevated levels of mortality in either the paediatric or adult demographic. Within the adult population, a substantial difference in the duration of dialysis was observed between individuals who underwent fasciotomy and those who did not. A statistically significant increase in the number of fasciotomy incisions was observed in patients diagnosed with sepsis compared with those without sepsis. The study found a significant positive correlation between the number of fasciotomy incisions and dialysis days. Conclusions: Neither adult nor paediatric patients with crush-induced AKI showed an increased risk of death after fasciotomy. The number of fasciotomy incisions significantly correlated with the development of sepsis. Despite experiencing delays in hospital admission for paediatric patients, the incidence of both crush syndrome and mortality rates among children remained relatively low.

Background: Epileptic patients frequently encounter cognitive impairment. Functions that are mostly affected involve memory, attention and executive function; however this is mainly dependant on the location of the epileptic activity. The aim of the study is to assess cognitive functions in MRI-negative epilepsy patients by means of neurophysiological and neuropsychological measures. Methods: The patients were enrolled from the outpatient Epilepsy/Clinical Neurophysiology clinic over a time period of 6 months. The study sample comprised 20 MRI negative epilepsy patients [mean age ± standard deviation (SD), 30.3 ± 12.56 years; age range 16-60 years; average disease duration, 13.95 years) and 10 age-matched controls (mean age ± SD, 24.22 ± 15.39 years), that were also education-matched (p>0.05) Patients with epileptogenic lesions were excluded from the study. Informed consent was obtained from all subjects involved in the study. Auditory ERPs and the cognitive screening tool EpiTrack, were administered to all subjects. Results: Latencies of P300 and slow waves were prolonged in patients compared to controls (p<0.05). ASM load and the patients’ performance in the EpiTrack maze subtest were the most significant predictors of P300 latency. A decline in memory, attention, and speed of information processing has been observed in patients with cryptogenic epilepsy compared to age-matched controls, as reflected by P300 latency and EpiTrack scores.

Previous research on video game player aggression has focused on violent content, while recent studies have examined competitive factors. Few research has examined the solely impacts of competitive factors in video games without violent content on aggression, and it is still unknown what neurological processes of these effects. The present study is the first to examine the the electrophysiological characteristics of short-term competitive video game exposure and aggression. Thirty-five participants played a video game in either competitive or solo mode for 15 minutes, followed by an ERP experiment based on the Oddball paradigm and the hot sauce paradigm to measure aggressive behavior. Results showed that playing competitive game mode was associated with faster judgment to aggressive words, larger P300 amplitudes, and selection of more chili powder. The P300 amplitude partially mediated the relationship between competitive game exposure and aggressive behavior. These findings support the general aggression model.

As the world's population ages and the resulting health problems become more serious, medical and health policies in developed countries are focused on how to prevent and treat the diseases of the aging population and how to maintain their quality of life. Typical age-related diseases include deafness, cataracts, osteoarthritis, chronic obstructive pulmonary disease, diabetes mellitus, and dementia. Although the mechanisms by which these diseases develop differ, they are all caused by the accumulation of molecular and cellular damage over time. In addition, age-related diseases can cause a decline in physical and mental functions and the ability to perform activities of daily living, as well as the loss of roles in society and a sense of fulfillment in life. Therefore, there is a need for treatment and measures to accurately grasp and maintain their quality of life.

In this study was found that these cancers were attributable to risk factors such as cigarette smoking, second-hand smoke, alcohol intake, excess body weight, diet, and six cancer-associated infections. Several databases were reviewed including PUBMED, Google scholar, and Web of Science. The facts suggest that a number of individuals present risk factors for cancer, which can be modifiable.

Abstract: (1) Background: tuberculosis presents an epidemiological trend towards inequality, especially among people in social exclusion and situations of vulnerability. To analyze territories where there is a concentration of people diagnosed with tuberculosis, in a street situation, and who make chronic use of alcohol, tobacco, and illicit drugs. We will also analyze trends in this health condition in southern Brazil; (2) Methods: Ecological study, developed in the 399 municipalities of Paraná, Southern Brazil, with all tuberculosis cases in the homeless population registered in the Information System of Notifiable Diseases between 2014 to 2018. For data analysis, we used descriptive statistics, for the time series, the Prais-Winsten autoregression method, whereas for spatial analysis, we used the Getis-Ord Gi technique*; (3) Results: in total, 560 cases were reported. We found a predominance of alcohol, smoking, and illicit drugs users, with an increasing trend in the state and clusters of spatial risk in the East health macro-region; (4) Conclusions: We observed territories with critical levels of highly vulnerable people who use psychoactive substances and are in a street situation. The results highlight the importance of incorporating public policies of social protection to these individuals and resolutive health services that receive and assist in eradicating TB.

Accumulating evidences demonstrate that the host genome's epigenetic modificationsare essential for living organisms to adapt extreme conditions.DNA methylation, covalent modifications of histone, andinter-association of non-coding RNAs facilitate the cellular manifestation ofepigenetic changes in the genome. Out of various factors involved in the epigenetic programming of the host, miRNA (microRNA) and LncRNA (Long non-coding RNA) are new generationnon-coding molecules that influence a variety of cellular processes like immunity, cellular differentiation, and tumor development. During tumor development, temporal changes in miRNA/LncRNA rheostat influence sterile inflammatory responses accompanied by the changes in the carcinogenic signalling in the host. At the cellular level, this is manifested by the up-regulation of Inflammasome and inflammatory pathways, which promotes cancer-related inflammation. In view of this, we discuss the potential of lncRNA and miRNA directed interventions in regulating inflammation and tumor development in the host.

Fire-related deaths are issues for forensic pathologists particularly in ascertaining if death occurred before or during fire. The authors highlight a unique bronchiolar epithelial cytological clue (nuclear heat-induced elongation) determined by active inhalation of hot gases and fumes, not yet described in the literature at distal small airways level.

Mastocytosis is characterized by pathological accumulation of mast cells (MC) in various organs. In these patients, MC may degranulate and thereby contribute to clinical symptoms, especially when a concomitant allergy is present. However, MC activation can not only be induced by high-affinity receptors for IgE, but also by anaphylatoxins, neuropeptides, IgG immune complexes, complement-components, drugs, products of bacteria or parasites, as well as physical factors such as heat, cold, vibration, stress, sun, or physical effort. Symptoms due to mediators released by activated MC may develop in adults suffering from systemic mastocytosis, but also evolve in children who usually have cutaneous mastocytosis (CM). Clinically, CM is otherwise characterized by typical brown, maculopapular skin lesions or mastocytoma associated with a positive Darier’s sign. Pruritus and flushing are common and blistering may also be recorded, especially in diffuse CM (DCM). Pediatric patients with mastocytosis may also have gastrointestinal, respiratory, and neurologic complaints. Although anaphylaxis is not a typical finding, pediatric patients with massive skin involvement and high tryptase levels have a relatively high risk to develop anaphylaxis. This paper reviews MC mediator-related symptoms and anaphylaxis in children with mastocytosis, with special emphasis on risk factors, triggers, and management.

This study presents a meta-analysis of studies that investigate the effectiveness of chitosan administration on lifestyle-related disease in murine models. A total of 34 published studies were used to evaluate the effect of chitosan supplementation. The effect sizes for various items after chitosan administration were evaluated using the standardized mean difference. Using Cochran’s Q test, the heterogeneity of effect sizes was assessed, after which a meta-ANOVA and –regression test was conducted to explain the heterogeneity of effect sizes using the mixed-effect model. Publication bias was performed using Egger’s linear regression test. Among the items evaluated, blood triglyceride and HDL-cholesterol showed the highest Q statistics and I2 values, respectively. Other than blood HDL-cholesterol, total cholesterol, and triglyceride in feces, most items evaluated showed a negative effect size with high significance in the fixed- and random-effect model (p<0.0001). In the meta-ANOVA and -regression test, administering chitosan and resistant starch was revealed to be most effective in lowering body weight. In addition, chitosan supplementation proved to be an effective solution for TNF-α inhibition. In conclusion, chitosan has been shown to be somewhat useful in improving symptoms of lifestyle-related disease. Although there are some limitations in the results of this meta-analysis due to the limited number of animal experiments conducted, chitosan administration nevertheless shows promise in enhancing the quality of human life.

This study was designed to assess variation of possible phytochemical compounds in the ethanolic extracts of Gigantochloa scortechinii rhizome. Destructive sampling was done by using selective random sampling method on four consecutive rhizomes from healthy clumps and was conducted at two natural forests and one secondary forest (planted). Homogenized sample were extracted using solvent extraction (70% ethanol) method. Ethanolic extracts of G. scortechinii rhizome were qualitatively analyzed using GC/MS GC2010 Plus, Shimadzu to determine the composition of phytochemical compounds and identified using FFNSC 1.3, NIST11, PMW_tox2, and Wiley229 spectral library. A qualitative variation was observed with a total of 56 compounds were identified and differentiated between study site and rhizome age. Results revealed that G. scortechinii rhizome contains various phytochemical compounds with potential as a plant of phytopharmaceutical importance. This is the first finding on the spatial and age-related effects of phytochemical compounds in a consecutive rhizome and of G. scortechinii rhizome specifically.

The aim of this cross-sectional study was to assess the perceived medication-related burden among patients with multiple non-communicable diseases (NCDs), and to investigate the association between perceived burden and adherence to medication therapy. Medication-related burden was measured in three primary care clinics in Qatar using the Living with Medicines Questionnaire (LMQ) among adults with diabetes, with or without other comorbidities. Adherence was measured using the Adherence to Refills and Medications Scale (ARMS). Two hundred ninety-three eligible patients participated in the study. Majority of participants reported experiencing minimum (66.6%) to moderate (24.1%) medication-related burden. There was a significant positive correlation between the medication-related burden (measured by the LWQ) and medication adherence (measured by ARMS) (rs (253) = 0.317, p <0.0005). The duration of diabetes diagnosis, adherence score, marital status, employment status, and presence diagnosis of hypertension were significant predictors of medication burden. A considerable proportion of the patients in this study have reported experiencing medication-related burden. Healthcare providers should seek strategies to address this burden especially among patients with risk factors of cardiovascular diseases, non-adherent to their medication therapy, living alone, or non-employed.

A brand-new approach to the understanding of breast cancer (BC) is urgently needed. In this contribution, the etiology, pathogenesis, and treatment of this disease is approached from the new pH-centric anticancer paradigm. Only this Unitarian perspective based upon that the hydrogen ion (H+) dynamics of cancer, allows understanding and integrating the many dualisms, confusions, and paradoxes of the disease. The new H+-related wide range model can embrace under a unique frame of mind the many aspects of the disease and at the same time therapeutically interfere with most, if not with all, the hallmarks of cancer known to date. The pH-related armamentarium available for the treatment of BC here reviewed may be beneficial for all types and stages of the disease. In this vein, we have attempted a mega synthesis of traditional and new knowledge in the different areas of breast cancer research and treatment based upon the wide range approach afforded by the hydrogen ion dynamics of cancer. The concerted utilization of a pH-related drugs nowadays available for the treatment of breast cancer is advanced.

Background: In most cases, intra-labyrinthine schwannoma (ILS) occurs in patients with unilateral hearing deterioration or neurofibromatosis type II (NF II). The pattern of localization of these tumors is various but affects mostly the cochlea. Extirpation of the ILS, if hidden by the cochlea modiolus, is difficult under the aspect of complete removal. Therefore, a tissue removal device (TRD) was designed and tested in temporal bones. The principle of handling the new device is a pushing and pipe cleaner handling inside the cochlea. This present study aimed to describe the first in vivo experience with the newly developed TRD for removing cochlear intra-labyrinthine schwannoma. Methods: In three patients, the TRD was used for the tumor removal of ILS. In two patients with a cochlear schwannoma in combination with a cochlea implantation and one patient suffering from NF II, a cochlear schwannoma was removed with the TRD. The access was performed with a posterior tympanotomy, an enlarged round window approach, and an additional second-turn access. The device was inserted and extracted gradually from the second turn access until the rings were visible in the second turn access. By pushing and pipe cleaner handling, the tumors were removed. An MRI control was performed on the day postoperatively with a T1 GAD sequence. Results: Tumor removal with the TRD was performed in a 15-minute procedure. MRI control confirmed a complete removal on the postoperative day in both cases. Conclusion: In vivo handling of the device confirmed a straightforward handling for tumor removal. MRI scanning showed a complete removal of the tumor by the TRD.

The ultimate goal of our review is to draw clinician’s attention, especially of those who are managing pediatric patients with permanent, long-standing, ventriculoperitoneal or, less commonly, ventriculo-atrial shunts. This specific subgroup of patients may eventually suffer from severe, intractable headaches which may negatively impair their quality of daily living. In the absence of any other clinical condition that could be attributed as the cause of the headache, shunt overdrainage should not be overlooked but, on the contrary, should be seriously taken into consideration in the therapeutic armamentarium of such cases, that are difficult to be handled.

In an agricultural system, finding suitable watering, pesticide, and soil content to provide the right nutrients for the right plant is a mystery so far. Plants cannot speak and cannot ask which food they require. These problems can be addressed by applying intelligent (fuzzy logic) controllers to IoT devices in order to enhance communication between crops, ground mobile robots, aerial robots, and the entire farm system. The application of fuzzy logic in agriculture is a promising technology that can be used to optimize crop yields and reduce water usage. It was developed based on language and the air properties in the agricultural fields were formulated. The entire system was simulated in the MATLAB/SIMULINK environment with Cisco Packet Tracer integration. The inputs for the system were soil moisture sensors, temperature sensors, humidity sensors, and outputs were pump flow, valve opening, water level, and moisture in sounding. The obtained results were the output of opening valve, moisture in sound, pump flow rate, outflows, water level, and ADH values, which are 10.00000013 rad/sec, 34.72%, 4.494%, 0.025 m^3/sec, 73.31 cm^3, and 750 values respectively. The outflow rate increase indicates that the water is released from the tanks, and the control signal fluctuates, indicating that the valve is opening.

Background: The variability of the obtained results of manual tests assessing the angle of strabismus depends on the experience, skills, and training of the examiner. The authors hope that the new measuring device will provide a more sensitive and repeatable method for detecting small strabismus angles compared to the gold standard – PCT. The purpose of this article is to present an innovative strabismus angle demonstration device, called Strabiscan, to present automated measurements of eye deviation, and to compare the obtained results of these measurements to the traditional manual method. Methods: In patients with the manifest strabismic disease (n = 30) and a group of healthy subjects (n = 30), a detailed history was taken and routine ophthalmologic examinations were performed, including best-corrected distance visual acuity, assessment of refractive error using an autorefractometer after cycloplegia, biomicroscopic evaluation of the anterior segment of the eye, and evaluation of the eye fundus by indirect ophthalmoscopy. Subsequently, each patient and healthy subjects were subjected to a prismatic cover-uncover test using a manual method, and then the presence of strabismus was detected and its angle assessed using demonstration Strabiscan device. Results: In the control group, using the Strabiscan demonstration device, small-angle latent strabismus ≤3DP was diagnosed in 83% of patients, and >3DP in 13%. In contrast, using the prismatic cover-uncover test, latent strabismus ≤3DP was diagnosed in only 13% of patients, and latent strabismus with an angle >3DP in 13% of patients. No statistically significant differences were noted in the measurements of strabismus angles made by the different methods. Conclusions: The Strabiscan demonstration device allows quick and accurate assessment of the strabismus angle. Compared to the prismatic cover-uncover test, it has a higher sensitivity for detecting low-angle latent strabismus. Measurements with the Strabiscan do not require the presence of additional co-assistants for the test.

Audio classification using deep learning models, essential for applications like voice assistants and music analysis, faces challenges when deployed on edge devices due to their limited computational resources and memory. Achieving a balance between performance, efficiency, and accuracy is a significant obstacle in optimizing these models for such constrained environments. In this investigation, we evaluate diverse deep learning architectures, including Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM), for audio classification tasks on the ESC 50, UrbanSound8k, and Audio Set datasets. Our empirical findings indicate that Mel Spectrograms outperform raw audio data, attributing this enhancement to their synergistic alignment with advanced image classification algorithms and their congruence with human auditory perception. To address the constraints of model size, we apply model compression techniques, notably magnitude pruning, Taylor Pruning, and 8-bit quantization. The research demonstrates that a hybrid pruned model achieves a commendable accuracy rate of 89 percent, which, although marginally lower than the 92 percent accuracy of the uncompressed CNN, strikingly illustrates an equilibrium between efficiency and performance. Subsequently, we deploy the optimized model on Raspberry Pi 4 and NVIDIA Jetson Nano platforms for audio classification tasks. These findings highlight the significant potential of model compression strategies in enabling effective deep learning applications on resource-limited devices, with minimal compromise on accuracy.

Background: Implantation of an endovascular device disrupts the homeostatic CD31:CD31 interactions among quiescent endothelial cells, platelets, and circulating leukocytes. The aim of this study was to mask endovascu-lar stents with peptides imitating CD31, to mimic the device's surface to resemble that of a healthy vascular endothelium. Methods: Peptide design relied on established trans-homophilic sequences found within domains 1 and 2 of CD31. Subsequently, synthetic peptides were immobilized onto flat CoCr and nitinol discs and their impact on the primary human arterial endothelial cell phenotype was evaluated in vitro. Following this, clinical-grade CoCr and nitinol endovascular devices were coated with one of the peptides that demonstrated the capability to induce a pro-physiologic endothelial phenotype, implanted in the arteries of rabbits, and compared to un-coated controls. Results: Membrane-distal CD31 domains 1 and 2 peptides exhibited a distinct capability to foster a healthy endothelial phenotype in vitro. By day 7 post-aortic implantation, CoCr stents were evenly covered by whole-some endothelial cells, devoid of thrombo-inflammatory signs, in contrast to both bare metal and drug-eluting stents. At day 60, nitinol-coated flow diverters demonstrated enhanced performance in comparison to the control groups for excluding experimental carotid aneurysms, facilitating the formation of a seamless "neo-arterial" wall. Conclusion: Membrane-distal CD31 biomimetic peptides effectively camouflage the device surface, prevent-ing local reactions and promoting rapid and seamless endovascular integration.

During the development of horizontal wells in bottom water reservoirs, the strong heterogeneity of reservoir permeability leads to premature bottom water breakthrough at locations with high permeability in the horizontal wellbore, and the water content rises rapidly, which seriously affects production. In order to cope with this problem, a new technology has emerged in recent years that utilizes gravel filling to block the flow in the annulus between the horizontal well and the borehole, and utilizes the Inflow Control Device (ICD) completion tool to carry out segmental water control in horizontal wells. Unlike conventional horizontal well ICD completions that use packers for segmentation, gravel pack combined with ICD completions breaks the original seg-mentation routine and increases the complexity of production dynamic simulation. In this paper, the flow in different spatial dimensions such as reservoir, gravel packed layer, ICD completion section and horizontal wellbore is modeled separately, and the annular pressure at different locations is used as the solution variable for the coupled solution, which realizes the prediction of oil production, water production and water content of gravel pack combined with ICD completions of horizontal wells. The model was used to calculate the effects of different crude oil viscosities, different reservoir permeabilities, different permeabilities of gravel packed layers, and different development stages on the water control effects of gravel pack combined ICD completions and conventional ICD completions at field conditions. This study provides a basis for using gravel pack combined ICD completions in horizontal wells in bottom water reservoirs.

This work presented the design and fabrication of blood vessel and breast tumor detection device (BKA-06) based on optical energy spectroscopy. The BKA-06 device uses red-to-near-infrared light-emitting diodes that allow physicians or physicians to visualize blood vessels and surface structures such as breast tumors with the naked eye. The device consisted of built-in current control circuit to have the appropriate brightness (maximum illuminance of 98592 lux) for the examination of superficial tumors deep under the skin, with a scan time of 3-5 minutes. The device BKA-06 could facilely observe each layer of blood vessels at the depth of the skin. For breast tumors, the location, size and invasive areas around the tumor can also be visualized with the naked eye using the BKA-06 sensor. The results show that the BKA-06 sensor can provide clear breast tumor and vascular images with a penetration of up to 15 cm in the skin and tissue layers of the breast. The breast tumor scanning tests with the BKA-06 sensor gave patients quick results and compared them through cell biopsy and MRI respectively. The device has the advantage of being simple, easy to use, providing potential practical applications in the medical field, reducing costs for patients when taking MRI or CT scans. Therefore, the BKA-06 device is expected to help doctors and medical staff overcome difficulties in infusion as well as identify breast tumors to support early breast cancer diagnosis and treatment.

This paper introduces a novel approach to addressing the challenge of accurately timing short distance runs, a critical aspect in the assessment of athletic performance. Electronic photoelectric barriers, although recognized for their dependability and accuracy, have remained largely inaccessible to non-professional athletes and smaller sport clubs due to their high costs. A comprehensive review of existing timing systems reveals that claimed accuracies beyond 30 milliseconds lack experimental validation across most available systems.To bridge this gap, a mobile, camera-based timing system is proposed, capitalizing on consumer-grade electronics and smartphones to provide an affordable and easily accessible alternative. By leveraging readily available hardware components, the construction of the proposed system is detailed, ensuring its cost-effectiveness and simplicity. Experiments involving track and field athletes demonstrate the proficiency of the proposed system in accurately timing short distance sprints. Comparative assessments against a professional photoelectric cells timing system reveal a remarkable accuracy of 62 milliseconds, firmly establishing the reliability and effectiveness of the proposed system. This finding places the camera-based approach on par with existing commercial systems, thereby offering non-professional athletes and smaller sport clubs an affordable means to achieve accurate timing.In an effort to foster further research and development, open access to the device's schematics and software is provided. This accessibility encourages collaboration and innovation in the pursuit of enhanced performance assessment tools for athletes.

We investigated new anodic coloring materials that are used as ion storage layers in complementary energy storage electrochromic devices (ESECDs) to enhance their electrochromic storage performance. In this study, we fabricated counter electrodes (ion storage layers) using IrO2 doping NiO (Ir: NiO) film through cathodic arc plasma (CAP) with varying surface charge capacities. We investigated the influence of MoO3-doped WO3 (Mo: WO3) film by various Ar/O2 gas flow ratios (1/4, 1/5, and 1/6). The ESECDs used in the demonstration were 10×10 cm2 in size. They achieved optical transmittance modulation of Ir: NiO- ESECDs (glass/ITO/ Mo: WO3/gel-polymer electrolytes/ Ir: NiO /ITO/glass), ΔT=53.3% (from Tbleaching (66.6%) to Tcoloration (13.1%)). The ESECDs had a quick coloration time of 3.58 seconds, a rapid bleaching time of 1.24 seconds, and high cycling durability. It remained at 45% transmittance modulation even after 3000 cycles. New anodic materials can provide an alternative to traditional active materials for bi-functional electrochromic batteries.

The work focuses on the possibility of application of tunable magnetic devices in electrical power systems with adaptive features. The idea underlying this type of operation, which depends on interaction with magnetic fluxes in a quassi-linear range of magnetic core characteristics, is a new approach to the design of magnetic elements. The suitable examples of adaptive electrical power systems can be devices for improving the quality of electricity. When used in compensators of reactive power or both reactive and distortion power, tunable magnetic devices offer much wider possibilities for the compensation, compared to “standard“ solutions, involving compensators based on fixed inductors. Nevertheless, the application of the proposed device in electrical systems such as is only an example of its possible implementations in the area of electrical power. In this work the following issues are covered: exemplary solution of an adaptive ‘passive’ compensator, rules for the operation of tunable magnetic device, and results investigation of the laboratory model of an electrical system based on such device.

This paper describes the use of an open source instrument called LANcube v2 to build a lighting device inventory. The LANcube v2 is and instrument having 5 color sensitive sensors, each on a face of a cube. The instrument can be mounted on a car roof in order to create a map of the artificial light at night while roaming the streets and roads. Based on the temporal variations of the detected signal on various cube’s faces, we developed a method of finding the position in 3D of each lighting device. The lamp spectral types can be determined thanks to the color balance of the raw Red (R) Green (G) Blue (B) and Clear (C) color bands. If one assumes a typical angular photometry of a lighting device with respect to its location, it is possible to estimate its luminous flux. Such information allows us to build a lighting devices inventory of a territory. One advantage of that new method is that it can provide information about the private lighting devices that are always excluded from public lighting inventories. We will compare the inventory extracted with that new methodology with an in situ lamp inventory made for two villages in Canada. This will allow us to emphasize the strengths and limitations of the method by comparing to the ground truth.

With the proportional reduction of MOSFET size, the leakage-to-barrier reduction (DIBL) effect leads to a more significant increase in the tunneling current on the gate, and the appearance of the gate tunneling current also seriously affects the static characteristics of the device. In this paper, a new theoretical model of the relationship between the direct tunneling current and the thickness of the oxide layer under the DIBL effect is proposed for the MOSFET device with ultra-thin oxide layer. On this basis, the characteristics of the MOSFET device are studied in detail by using HSPICE, and their working conditions are quantitatively analyzed. The characteristic variation trend of small-size devices under the influence of gate tunneling current is predicted. The simulation results using BSIM4 model are consistent with the theoretical model. The theory and data in this paper will provide useful reference for large scale integrated circuit design.

Background: The human mind is multimodal. Yet most behavioral studies rely on century-old measures such as task accuracy and latency. To create a better understanding of human behavior and brain functionality, we should introduce other measures and analyze behavior from various aspects. However, it is technically complex and costly to design and implement the experiments that record multiple measures. To address this issue, a platform that allows synchronizing multiple measures from human behavior is needed. Method: This paper introduces an opensource platform named OpenSync, which can be used to synchronize multiple measures in neuroscience experiments. This platform helps to automatically integrate, synchronize and record physiological measures (e.g., electroencephalogram (EEG), galvanic skin response (GSR), eye-tracking, body motion, etc.), user input response (e.g., from mouse, keyboard, joystick, etc.), and task-related information (stimulus markers). In this paper, we explain the structure and details of OpenSync, provide two case studies in PsychoPy and Unity. Comparison with existing tools: Unlike proprietary systems (e.g., iMotions), OpenSync is free and it can be used inside any opensource experiment design software (e.g., PsychoPy, OpenSesame, Unity, etc., https://pypi.org/project/OpenSync/ and https://github.com/moeinrazavi/OpenSync_Unity). Results: Our experimental results show that the OpenSync platform is able to synchronize multiple measures with microsecond resolution.

Quantification of physical activity (PA) depends on the type of measurement and analysis method making it difficult to compare adherence to PA guidelines. Therefore, test-retest reliability, criterion validity, and stability for self-reported (i.e. questionnaire and diary) and device-based measured (i.e. accelerometry with 10/60 second epochs) PA was compared in 32 adults and 32 children from the SMARTFAMILY study to examine if differences in these measurement tools are systematic. PA was collected during two separate measurement weeks and the relationship for each quality criteria was analyzed using Spearman correlation. Results showed the highest PA values for questionnaires followed by 10-second and 60-second epochs measured by accelerometers. Levels of PA were lowest when measured by diary. Only accelerometry demonstrated reliable, valid, and stable results for the two measurement weeks, the questionnaire yielded mixed results and the diary showed only few significant correlations. Overall, higher correlations for the quality criteria were found for moderate than for vigorous PA and the results differed between children and adults. Since the differences were not found to be systematic, the choice of measurement tools should be carefully considered by anyone working with PA outcomes, especially if vigorous PA is the parameter of interest.

In this paper, we aim to assess the electric current parameters and report the analysis of the associated degree of ventricular recovery during left ventricular assist device (LVAD) support. An assumption was made there is a linear relationship between ventricular recovery degree and the pump electric current pulsatility index (PI). The experimental study was carried out using the ViVitro Pulse Duplicator System with Sputnik 1 LVAD connected. Cardiac output (CO) and cardiac power output (CPO) were used as a measure of ventricular recovery degree. Different heart rates (HR) (59, 73, 86 bpm) and pump speeds (7600–8400 rpm in 200 rpm steps) were investigated. Ventricular stroke volumes in the range of 30–80 ml for each heart rate at certain pump speed were used. The obtained relationships of CO and CPO vs. PI was linear as the coefficients of determination for each regression curve were more than 0.8. CO vs. PI: R2=0.9218; 0.9271; 0.9172 and CPO vs. PI: R2=0.8517; 0.841; 0.8244 for HR=59 bpm; 73 bpm; 86 bpm, respectively. Study findings suggest that adequate interpretation of parameters could potentially serve as a valuable clinical tool to assess ventricular recovery based on LVAD infrastructure without requiring any special hemodynamic assessment.

Sulphuric acid is a widely used raw material in the chemical industry. Its corrosive effect on materials varies considerably, depending on impurities, temperature and water content. Accordingly, good corrosion resistance under all conditions is very difficult to achieve. This is especially an issue for micro process apparatus with very thin walls. Furthermore, such devices are often joint by diffusion bonding what may alter materials properties due to high temperatures and long dwell times. In fact, for each new material, the diffusion bonding parameters must be optimized and the impact on mechanical as well as corrosion properties must be investigated. In this paper, two high molybdenum alloys, namely Hastelloy B3 and BC-1, were evaluated. Diffusion bonding tests were performed using ten layers of sheet material in between round stock. Corrosion tests were performed in 70 % sulphuric acid at 100°C for 1000 h. Tensile tests on both alloys were carried out for different material conditions, to determine the change in mechanical strength and elongation at fracture values. In general, independent of the condition of the materials, the fracture behavior of both alloys was found to be ductile and the specimens show the typical dimple structure, in the case of diffusion bonded samples, interrupted by weak spots or rather non-bonded areas. These areas are obviously causing the onset of material failure and thus, a degradation of mechanical properties. Tensile samples, that were aged in 70% sulphuric acid at 100°C for 1000 hours showed local corrosion attacks at the grain boundaries at the circumferential surfaces and especially at the joining planes – for Hastelloy B3 much more pronounced than for Hastelloy BC-1. Accordingly, a further decrease of both, the stress- and elongation at fracture values is observed. However, the typical material parameters like 0.2 % yield strength used for dimensioning components are found to be sufficient high, even when operating the materials under such harsh conditions. When concluding the results, at least Hastelloy BC-1 reveals both sufficient good mechanical properties and an excellent corrosion resistance, regardless of the heat treatment, and could be considered for manufacturing micro-process engineering apparatuses operated in a sulphuric acid environment. This is a significant advance compared to the results obtained within a AiF project, previously carried out on four different materials to investigate the corrosion resistance in sulphuric acid.

In a depolarizing instrument, such as a broadband imaging spectrometer, the depolarizers are placed on the system for stabilization the optical signal. They are also used to reduce measurements offsets due to strong polarization dependence, which produce drastic deterioration of the signal to noise ratio. Dynamic depolarizer with a controllable degree of polarization is also required to study the effect of noise on quantum information. The article described a new instrument for characterization the variable depolarizer with features which make it different from a polarimetric system. The analysing system based on the simple structural design and has good stability for real-time measurement. A practical application of the described interferometer system for variable depolarizer characterization is also presented.

This work focuses on the design improvement of a tri-axial piezoresistive accelerometer specifically designed for head injuries monitoring where medium-G impacts are common, for example in sports such as racing cars or American Football. The device requires the highest sensitivity achievable with a single proof mass approach, and a very low error (<1%) as the accuracy for these types of applications is paramount. The optimization method differs from previous work as it is based on the progressive increment of the sensor mass moment of inertia (MMI) in all three axes. The work numerically demonstrates that an increment of MMI determines an increment of device sensitivity with a simultaneous reduction of cross-talk in the particular axis under study. The final device shows a sensitivity increase of about 80% in the Z-axis and a reduction of cross-talk of 18% respect to state-of-art sensors available in the literature. Sensor design, modelling and optimization are presented, concluding the work with results, discussion and conclusion.

Mobile devices have become tools we spend our free time where we carry them with us every moment, they allow us to interact with the environment, we immortalize the moment when necessary. These devices which we spend most of our daily life become very common in recent years and even there are unique business areas emerged. It was announced that the number of people using smartphones is over than 2.5 billion in the first quarter of 2016. As people become more addicted to mobile technology, they become the target of malevolent people. A huge increase in the number of mobile malware is observed as the number of the users increase. Billions of users at risk day by day due to the development of the methods. We have addressed the recent methods used and the types of malware that target mobile devices in our study. We have mentioned the proxy server and reverse proxy server operation logic. We discuss the method of turning mobile devices into reverse proxy servers, risks involved and protection methods.

Tritordeum is an amphiploides species resulting from the hybridization between durum wheat (T. durum) and wild barley (H. chilense). This new cereal is considered a natural crop as it is obtained by traditional breeding techniques. Given its appreciable organoleptic characteristics, agronomic features, presence of interesting components, and good technological properties, tritordeum is of promising interest for the development of health-oriented foods. In this study, we evaluated two registered tritordeum cultivars, Bulel and Aucan. T. durum (Provenzal) was employed as the positive control. The extracted proteins were digested by gastric /pancreatic proteases and their biological effects on Caco-2 differentiated on transwell inserts were determined. Changes in cell viability, monolayer permeability, organization of F-actin microfilaments, and ER stress, triggered by protein-digested samples (DPs) were inspected. Our results showed that exposure to Provenzal-DPs promptly disrupted the tight junction barrier. Conversely, Aucan-DPs did not enhance monolayer permeability; whereas, Bulel-DPs exerted only slight effects. Provental-DPs-induced toxicity was also confirmed by changes in cell viability and by the deep reorganization of the enterocyte cytoskeleton. In contrast, Aucan-DPs and Bulel-DPs did not affect monolayer viability and cytoskeleton structure. Overall, our findings suggest that both tritordeum cultivars could be potential candidates for mitigating the toxicity of wheat flour.

Aging is a major risk factor for the higher incidence and prevalence of chronic conditions, such as cancer, cardiovascular and metabolic diseases, and neurodegenerative diseases. Closely linked with the onset of all these age-related diseases is immunosenescence, a condition defined as progressive reconfiguration of the immune functions leading to an increased susceptibility to infectious diseases, poorer response to vaccination, increased prevalence of cancer, rheumatoid arthritis, and other chronic diseases characterized by a pro-inflammatory state named inflammaging. Given that immunosenescence frames age-related diseases, it is natural to ask how these illnesses are related under the context of innate and adaptative components of the immune system. Knowledge processing by Formal Concept Analysis (FCA) of age-related diseases framed in an immunosenescence multivalued context shows that a hierarchy among these diseases emerges with a subconcept-superconcept nested structure, with two clusters, first made of metabolic diseases, cancer, and cardiovascular diseases. Second metabolic and neurodegenerative diseases and rheumatoid arthritis. Metabolic diseases seem to be a pivot illness and they must be a primary target given their global incidence and prevalence and their cost-effective treatments like regular physical activity, weight loss, healthy diet, stopping smoking, and reducing or managing stress. Another implication of the ontological analysis of age-related diseases is about the nature of immunosenescence, suggesting that initial symptoms of age-related diseases are mainly related to innate immune mechanisms, and developing of severe symptoms of age-related diseases like cancer, cardiovascular or neurodegenerative diseases depends on the activation of acquired immunity processes.

Akebia trifoliata is an economically important self-incompatible fruit tree in the family Lardiza-balaceae. Asexual propagation is the main strategy used to maintain excellent agronomic traits. However, the generation of adventitious roots during asexual propagation is very difficult. To study the important role of the WUSCHEL-related homeobox (WOX) transcription factor in fruit and adventitious root growth and development, we characterized this transcription factor family in the whole genome of A. trifoliata. A total of 10 AktWOXs were identified, with the fol-lowing characteristics: length (657~11328 bp), exon number (2~5), isoelectric point (5.65~9.03), amino acid number (176~361 AA), and molecular weight (20.500~40.173 kDa). 10 AktWOXs were classified into modern (6), intermediate (2), and ancient clades (2) and that all AktWOXs had undergone strong purifying selection during evolution. The expression profile of AktWOXs dur-ing A. trifoliata fruit development and adventitious root formation indicated that AktWOXs are widely involved in the development of the three fruit tissues, flesh, seeds and rind, and play an important role in the regulation of adventitious root development. Overall, this is the first study to identify and characterize the WOX family in A. trifoliata and will be helpful for further re-search on A. trifoliata fruit development and adventitious root formation.

Assessment of renal function is critical to diagnose and manage renal age-related decline, disease (KD), and failure, which are prevalent in the elderly population. Glomerular filtration rate (GFR) is widely used as an indicator of kidney function, but its direct measurement is challenging, as are its age and gender caveats. This makes difficult the differential diagnosis, between age-related physiological decline and KD and/or failure. Currently, the inflammation-based modified Glasgow prognostic score (mGPS) is emerging as promising biomarker of several inflammatory acute/chronic diseases. In this study, the large variability of eGFR with age and gender was evaluated, as the association of eGFR values with mGPS levels. A population of 57449 adult participants (age ≥18 years) was enrolled. Appropriate circulating biomarkers were measured to detect eGFR and mGPS values. The data obtained demonstrated a significant decrease of eGFR in men vs. women across the four selected age classes (18-40, 40-60, 60-80, 80-100 years), eGFR classes were significantly associated with mGPS (p<0.001), as age-classes and gender with mGPS categories. Accordingly, the percentage of people having a mGPS score= 2 significantly increased across the eGFR classes: with a 11% in the G1/eGFR class to achieve the 44% in G5/eGFR. Thus, the combination of mGPS with eGFR could represent the best benchmark risk model for differentiating age-related renal decline from a very KD, and for a better identification of different degrees of KD severity.

The advent of immunotherapy and specifically of immune checkpoint inhibitors (ICIs) for the treatment of solid tumors has deeply transformed therapeutic algorithms in medical oncology. Approximately one third of patients treated with ICIs may develop immune-related adverse events, being the gastrointestinal tract often affected with different grades of mucosal inflammation. Checkpoint inhibitors colitis (CIC) presents with watery or bloody diarrhoea and in case of severe activity requires ICIs discontinuation. The pathogenesis of CIC is multifactorial and still partially unknow: anti-tumor activity that collaterally effects the colonic tissue and the upregulation of specific systemic inflammatory pathways (i.e., CD8+ cytotoxic and CD4+ T lymphocytes) are mainly involved. Many open issues remain on treatment timing and options, and biological treatment, above all with anti-TNF alpha, can be offered to these patients aiming to rapidly resume the oncological therapies. This review aims to summarize the pathogenetic mechanisms underlying CIC and to discuss evidenced-based management including the role of biological therapy.

Age-related macular degeneration (AMD) is a common ocular disease characterized by the de-generation of the central area of the retina in elderly population. Progression and response to treatment is influenced by genetic and non-genetic factors. Proteomics is a powerful tool to study, at the molecular level, the mechanisms underlaying the progression of the diseases, to identify new therapeutical targets and to establish biomarkers to monitor progression and treatment ef-fectiveness. In this work we pursue to systematically review the use of proteomic-based ap-proaches for the study of the molecular mechanisms underlying the development of AMD, as well as the progression of the disease and the on-treatment patient monitoring. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) reporting guidelines were followed. Proteomic approaches have identified key players on the onset of the disease, such as proteins involved in lipid metabolism and oxidative stress, but also in the progression to advanced stages, including factors related to extracellular matrix integrity and angiogenesis. Although an-ti-vascular endothelial growth factor (anti-VEGF)-based therapy has been crucial in the treatment of neovascular AMD it is necessary to get deeper into the underlying disease mechanisms to move forward to next-generation therapies of the later-stage forms of this multifactorial disease.

The COVID-19 pandemic has had a significant impact on all facets of life and has exacerbated many challenges faced by people living with tuberculosis (TB). This study aimed to assess the health-related quality of life (HRQoL) of TB patients in Guinea during the COVID-19 pandemic. A mixed-methods study was conducted using two validated psychometric tools to assess HRQoL and qualitative interviews among TB patients enrolled in treatment at three centers in Conakry, Guinea. Multinomial logistic regression was used to identify factors associated with the deterioration of HRQoL. We included 439 participants in the study, among whom 44% and 31% experienced pain and anxiety, respectively. We found that an increase in the number of household members and the distance from participants’ residence to the health centre were significantly associated with lower HRQoL. Qualitative interviews highlighted nutritional and financial concerns which were exacerbated during COVID-19 pandemic and beliefs that the Guinean Government’s assistance plan was insufficient. This study supports the implementation of specific relief plans for TB patients which includes nutritional and psychological support, especially those whose movements are limited by travel restrictions, impeding access to TB care, reducing work opportunities and exacerbating financial needs and stress.

Antibiotics have been used in various fields such as livestock farm and fish farm as well as hospital in order to treat diseases caused by bacteria. However, the antibiotics that are not completely decomposed, but remains as residue and discharge to aquatic environment, can cause an imbalance in the gut flora of host, as well as regulate abnormal host gene regulatory system. We investigated the effects of chronic exposure with the low concentrations of erythromycin and ampicillin on gut microbiome and immune and stress-related gene expression using Korea native ricefish (Oryzias latipes). As a result of microbiome analysis, the proportion of Proteobacteria was increased in the ricefish when exposed to erythromycin and ampicillin chronically, whereas the proportion of other bacterial phyla decreased. In addition, the immune and stress-related genes were significantly influenced in the ricefish under the chronic antibiotics exposure. These results show that the internal microbial flora and the host gene expression are susceptible even in the low concentration of chronic antibiotic existing environments. This study provides the importance of the appropriate use of antibiotics dose to maintain the sustainable and healthy aquaculture industry and water ecosystem.

The importance of diet and the gut-brain axis for brain health and cognitive function is increasingly acknowledged. Dietary interventions are tested for their potential to prevent and/or treat brain disorders. Intermittent fasting (IF), the abstinence or strong limitation of calories for 12 to 48 hours, alternated with periods of regular food intake, has shown promising results on neurobiological health in animal models. In this review article, we discuss the potential benefits of IF on cognitive function and the possible effects on the prevention and progress of brain-related disorders in animals and humans. We do so by summarizing the effects of IF which - through metabolic, cellular and circadian mechanisms - lead to anatomical and functional changes in the brain. Our review shows that there is no clear evidence of a positive short-term effect of IF on cognition in healthy subjects. Clinical studies show benefits of IF for epilepsy, Alzheimer’s disease and multiple sclerosis on disease symptoms and progress. Findings from animal studies show mechanisms by which Parkinson’s disease, ischaemic stroke, autism spectrum disorder and mood- and anxiety disorders could benefit from IF. Future research should disentangle whether positive effects of IF hold true regardless of age or the presence of obesity. Also, variations in fasting patterns, total caloric intake and intake of specific nutrients may be relevant components of IF success. Longitudinal studies and Randomized Clinical Trials (RCTs) will provide a window into the long-term effects of IF on the development and progress of brain-related diseases.

This study presents an in–depth analysis and strategic planning techniques for approaching a situation or achieving progress related to information technology services of Nueva Ecija University of Science and Technology, particularly the San Isidro Campus. As an educational organization and one in the region excellence providers in education, the University has so much vital information to manage and services to offer to provide the student's needs through the Management Information System department, application of IT services as a competing instrument to combat tedious tasks such as online admission, grade release, enrollment information, and online learning, university announcement, and possible students’ internship. The objective of this study is to determine the influence of information technology in day–to–day activities of the organization and strategy applied to streamline processes more conveniently. The researchers develop a conceptual model that would analyze the IT services' impact by identifying its strengths, weaknesses, opportunities, and threats and cleverly act on it using the TOWS Matrix in generating strategic decisions. The overall results were beneficial to the University and MIS as a basis for formulating competitive strategies and integrating it in an extended development plan.

Music and language are hypothesized to share neural resources, particularly at the level of syntax processing. Recent reports suggest that attention modulates this sharing of neural resources, but the time-course of the effects of attention, and the degree to which attention operates similarly on music and language, are yet unclear. In this EEG study we manipulate the syntactic structure of simultaneously presented musical chord progressions and garden-path sentences in a modified rapid serial visual presentation paradigm, while varying top-down attentional demands to the two modalities. The Early Right Anterior Negativity (ERAN) was observed in response to both attended and unattended musical syntax violations. In contrast, an N400 was only observed in response to attended linguistic syntax violations, and a P3 only in response to attended musical syntax violations. Results show that top-down allocation of attention indeed affects the processing of syntax in both music and language, with different neural resources acting upon the two modalities particularly at later stages of cognitive processing. However, the processing of musical syntax at an earlier stage of the perceptual-cognitive pathway, as indexed by the ERAN, is partially automatic, and is strongly indicative of separate neural resources for music and language.

IgE-mediated wheat allergy is a gluten-related disorder. Wheat is one of the five most common food allergens in children. However, the natural history of IgE-mediated wheat allergy has seldom been described in the research literature. This study presents the current state of knowledge about the IgE-mediated wheat allergy in children.

Using structured light to drive colloidal motors, due to its advantages of remote manipulation, energy tunability, programmability, and controllability of spatiotemporal distribution, has been attracting much attention in the fields of targeted drug delivery, environmental control, chemical agent detection, and smart device design. Here, we focus on studying the group control of colloidal made from a photo-responsive organic polymer molecule NO-COP (N,O-Covalent organic polymer). These colloidal motors mainly respond to the light intensity patterns. We chose a digital micromirror device (DMD) to modulate the structured light field shining on the sample, by considering its merit of fast refreshing speed, good programmability, and high-power threshold. It is found that under ultraviolet or green light modulation, such colloidal motors exhibit various group behaviors including group diffusion, group patterning, and group migration. The qualitative interpretation is also provided for these observations.