This paper proposes a novel three-phase voltage source inverter dead-time compensation strategy for accurate compensation in wide current regions of the inverter. In particular, an analysis of the output voltage distortion of the inverter, which appears as parasitic components of the switches, has been conducted for proper voltage compensation in the low current region, and an on-line compensation voltage controller has been proposed. Also, a new trapezoidal compensation voltage implementation method using the current phase is proposed to simplify realizing the trapezoidal shape of the three-phase compensation voltages. Finally, when the proposed dead-time compensation strategy is applied, the maximum phase voltage magnitude in the linear modulation voltage regions is defined to achieve smooth operation even at high modulation index. Simulations and experiments were conducted to verify the performance of the proposed dead-time compensation scheme.

Active front-end (AFE) rectifiers have been becoming widely employed in power systems to achieve unity power factor and harmonic mitigations. The typical modeling approaches applied for AFE rectifiers in the literature mostly relied on two baselines named the detailed model and the time average model. The former approach deals with the switching element model (SEM) leads to significant harmonics in currents with distorted waveforms. The latter approach uses the average-value model (AVM) to overcome the currents’ harmonics as well as provide fast responses. However, even the AVM baseline has contained problems during the starting stage (lack of control signals) and over the dead-time periods which causes serious issues in the implementation process. This paper presents an improved dynamic AVM for AFE rectifiers by precisely considering the issues mentioned above along with the practical starting procedure and desirable initialization. The studied AFE rectifier is developed using the voltage-oriented control (VOC) technique based on the different modeling methodologies including SEM, Conventional AVM, and the proposed AVM. The performance of all models is analyzed and compared using simulation results with MATLAB/Simulink R2023a Function blocks for all the algorithm parts and SimScape elements for the electrical circuit model. The simulation results illustrate that the performance of the proposed AVM approach can closely resemble the behavior of the SEM baseline with low harmonic distortion.

Twin pregnancies are highly undesirable in dairy cattle; they compromise the health and wellbeing of a cow, and its incidence dramatically impairs the farm economy. Recently, a genomic prediction for twin pregnancies has been developed. The objective of this study was to assess cow, environmental and management risk factors affecting the incidence of twin pregnancies in high-producing dairy cows in their first lactation, with special emphasis placed on the genomic prediction values for twin pregnancy. Our study population of primiparous cows proved valuable in identifying factors other than genomic predictive values influencing the twin pregnancy rate. The odds ratio for twin pregnancy was 0.85 (p <0.0001) for each unit of a prediction value increase, 3.5 (p = 0.023) for cows becoming pregnant during the negative photoperiod, and 0.33 (p = 0.016) for cows producing ≥42 kg of milk at AI, compared to the remaining cows producing <42kg of milk. As a general conclusion, the practical implication of our findings is that genomic prediction values can identify the risk of twin pregnancy at herd level. Given the cumulative effect of genomic selection, selecting for animals with reduced genetic risk of twin pregnancies can contribute to reduce its incidence in dairy herds.

The Dead Sea basin is the lowest terrestrial site on the globe and is internationally recognized as a photoclimatotherapy center. Since the last century, questions raised regarding the possible presence of a unique incident ultraviolet irradiation, allowing successful treatment of psoriasis, atopic dermatitis and other dermatological diseases. Aim: Determine the characteristics of the solar ultraviolet irradiation and understand the mechanism of action of photoclimatotherapy while applying the results to clinical protocols of treatment. Methods: A meteorological station was established at the Dead Sea basin to continuously measure global, UVB and UVA irradiation. The same irradiation parameters are also being monitored continuously by a set of identical ultraviolet irradiation instruments installed on the campus of the Ben-Gurion University of the Negev, in Beer Sheva. Results: This study details the results of these long-term measurements, ae well as their correlation with the success obtained by clinicians treating psoriasis patients. Conclusions: A database of more than 25 years has enabled the medical staff to establish tailor-made protocols for sun-exposure time intervals as a function of particular month and hour of day. The availability of such information has significantly improved the results of photoclimatotherapy for psoriasis and at the same time increasing the safety of sun-exposure at the Dead Sea.

Traversal time in tunneling effect for ultrasonic waves in tapered waveguides is derived considering its analogy with quantum and electromagnetic waves tunneling. If, as traversal time, the so called phase time is considered, the ultrasonic wavepacket shows the equivalent in acoustics of superluminality i.e. the derived velocity , crosses the limit of bulk transverse ultrasonic waves in the medium of the waveguide that is the equivalent of c in the quantum and electromagnetic cases. Graphs clearly illustrating this so called Hartman effect are obtained confirming the experimental results in the three different fields.

The present investigation focuses on the impact of jet nozzle orientation on mixing time in a cylindrical tank. The aim is to identify nozzle positions that improve mixing performance and to elucidate the governing parameters that influence it. A water tank was employed for the experiment. The vertical inclination angle (α) and the horizontal inclination angle (β) of the jet nozzle determined the nozzle positions. Mixing time was determined using an inert tracer and spectrophotometry measurements. The findings show that the mixing time is significantly influenced by the position of the jet nozzle position. The accuracy of existing jet turbulence and the circulation models for the prediction of mixing time was evaluated for the different nozzle positions. Our results indicate that both models provide accurate predictions for the conventional centrally aligned (β = 0°), upward-pointing jet nozzle positions only (α > 0). For the other nozzle positions where β > 0° and at varying α, the data follow the same trends as the jet turbulence and circulation models, however, the proportionality constants vary. Shorter mixing times can be attributed principally to longer jet path lengths and therefore higher fluid entrainment and circulation, as well as higher dissipation rates per jet length squared. However, it is suspected that the 3-dimensional nature of the flow pattern generated in the tank also plays a non-negligible role since mixing is hindered when the nozzle points more towards the tank wall.

In this paper, the concept of absolute airspace is further elaborated, and the time transform effect, the frequency transform relation of clock timing, and the principle of Doppler effect of special relativistic light are analyzed and demonstrated. Based on the concept of absolute airspace, a new and accurate Doppler effect relation of light (electromagnetic wave) is proposed. It is proved that there is a synchronous relationship between the time shift effect and the frequency change of the timing inside the clock. When the light (electromagnetic wave) source is in motion, the Doppler effect includes two physical mechanisms: the frequency change caused by time transformation effect and the frequency change caused by relative motion. When the light source is in motion, the Doppler effect of the light there are some differences in different directions due to the rotation of the earth. The relation of Doppler effect of special relativistic light is only a highly approximate relation, and its theoretical basis, special relativity, is flawed in principle.

Currently, the Israeli energy industry faces the challenge of a considerable increase in solar electricity production. Being a relatively isolated system, the significant expansion of solar electricity may cause problems with electricity quality. The electrical storage installation can resolve this problem. In Israel's situation, the optimal solution can be the creation of a channel between the Mediterranean and the Dead Sea. The channel can solve three closely related problems: the increased production of desalinated water for domestic, industrial, and agricultural needs; the prevention of a permanent Dead Sea level decline and its imminent disappearance; the development of hydro-pumping electrical storage stations; and the creation of numerous PV facilities in the Negev area for national electricity generation. However, a detailed analysis should be done for the estimation of the possible increase of solar electric generation with the consideration of a stochastic PV outcome and a potential ability to use the Dead Sea for the brine discharge from electrical hydro-storage plants.

Trailing oil is the tail section of contamination. There are two main reasons for the formation of trailing oil, one is the effect of laminar flow boundary layer, the other is the outflow of the preceding batch remained in the dead-legs. In the batch transportation of refined oil, under the action of viscous force, the preceding batch forms laminar boundary layer near the pipe wall and stays on the pipe wall, resulting in the phenomenon of contamination trailing and formation of trailing oil. When oil passes through the valve chamber of the oil transportation station, dead-leg will be formed. Due to gravity and convection diffusion, preceding batch flowing from dead-legs will form trailing oil in the pipeline. The phenomenon of trailing oil exists in the process of batch transportation, which will have an effect on the quality of oil. In this paper, Reynolds time-averaged method is used to simulate turbulence.Computational Fluid Dynamics(CFD) software is used to simulate different flow rates and bypass lengths to obtain contamination-related experimental data.Matlab software is used to perform multi-nonlinear regression for the oil substitution time, the length of the bypass and the flow rate. The formula for calculating the length of the trailing oil produced by the dead-leg is obtained. The modified formula for calculating the length of the contamination is obtained by combining the existing formula for calculating the length of the contamination.

As Heterogeneous Wireless Sensor Network (HWSN) fulfill the requirements of researchers in the design of real life application to resolve the issues of unattended problem. But, the main constraint face by researchers is energy source available with sensor nodes. To prolong the life of sensor nodes and hence HWSN, it is necessary to design energy efficient operational schemes. One of the most suitable routing scheme is clustering approach, which improves stability and hence enhances performance parameters of HWSN. A novel solution proposed in this article is to design energy efficient clustering protocol for HWSN, to enhance performance parameters by EECPEP-HWSN. Propose protocol is designed with three level nodes namely normal, advance and super node respectively. In clustering process, for selection of cluster head we consider three parameters available with sensor node at run time, i.e., initial energy, hop count and residual energy. This protocol enhance the energy efficiency of HWSN, it improves performance parameters in the form of enhance energy remain in the network, force to enhance stability period, prolong lifetime and hence higher throughput. It is been found that proposed protocol outperforms than LEACH, DEEC and SEP with about 188, 150 and 141 percent respectively.

The designs of two large arenas of different epochs are discussed, which are the most famous antique amphitheater the Roman Colosseum (Italy) and the modern Gazprom Arena stadium (St. Petersburg, Russia). 3D-computer models of the arenas have been built and evacuation of people has been simulated in the Sigma FS software (Russia). The arena designs are analyzed in terms of organizing pedestrian evacuation, a comparative analysis is made, and the specific characteristics affecting the evacuation time are established.

This study compared the performance of five Family Generalized Auto-Regressive Conditional Heteroscedastic (fGARCH) models (sGARCH, gjrGARCH, iGARCH, TGARCH and NGARCH) in the presence of high positive autocorrelation. To achieve this, financial time series was simulated with autocorrelated coefficients as ρ = (0.8, 0.85, 0.9, 0.95, 0.99), at different time series lengths (as 250, 500, 750, 1000, 1250, 1500) and each trial was repeated 1000 times carried out in R environment using rugarch package. And the performance of the preferred model was judged using Root Mean Squared Error (RMSE) and Mean Absolute Error (MAE). Results from the simulation revealed that these GARCH models performances varies with the different autocorrelation values and at different time series lengths. But in the overall, NGARCH model dominates with 62.5% and 59.3% using RMSE and MAE respectively. We therefore recommended that investors, financial analysts and researchers interested in stock prices and asset return should adapt NGARCH model when there is high positive autocorrelation in the financial time series data.

Tungsten and its alloys are considered as a key component in high temperature environment. Self-passivating W-Si-xY alloys with different Y contents made from the powders milled for different times were prepared by mechanical alloying (MA) and spark plasma sintering (SPS). Their microstructures and oxidation resistance were investigated. It is found that the oxidation resistance of the alloys with low Y contents (0Y and 2Y) made from 20 h-milled powders is worse than that of the alloys made from 4 h-milled powders. It is because the protective WO3/SiO2 composite layer is discontinuous. While the alloys with high Y contents (4Y and 6Y) made from 4 h and 20 h-milled powders show good oxidation resistance. Even, the thickness of the oxide layer of the alloys with 4Y and 6Y made from 20 h-milled powders after oxidation at 1000 ℃ for 2 h is 84.0 μm and 70.7 μm, less than that made from 4 h-milled powders. This is due to the size and distribution of W5Si3, Y2Si2O7 aggregates and W-Y-O melt. The synergistic effects of Y contents and milling time on the microstructures and oxidation resistance of the alloys are revealed.

An exposition is undertaken to reveal the significant impact of the time-dependent root parameter, on the stability of Pointwise Stationary Fluid Flow Approximation (PSFFA) model of the non-stationary queueing system. This opens new grounds to stability analysis of non-stationary queueing systems. Potential PSFFA applications of IoT are highlighted.

Annotation. The experience of using coal flotation waste (CFW) as a weakly exothermic insulating backfill for insulating the head part of forging dead-melted steel ingots is presented.It has been shown that when using weakly exothermic fills based on single-component fills in the form of CFW, it is possible to reduce the chemical heterogeneity of the ingot by producing a closed shrinkage cavity, which allows halving heat loss and depth of penetration of shrinkage looseness into the body of the ingot, reducing the segregation of impurities, compacting the head part of the ingot and increasing the yield; moreover, the profitable part of the ingot is more dense and less contaminated with nonmetallic inclusions.The studied patterns of the formation of a closed shrinkage cavity with a dense “bridge” in the head part of a dead-melted steel ingot made it possible to develop and implement a technology for casting large forging ingots of sufficiently high quality using weakly exothermic heat-insulating materials based on metallurgical waste (coke screenings, coal flotation waste)

This study investigates the impact of Foreign Direct Investment (FDI) on economic growth and examines the causality between FDI and economic growth in Bangladesh during 1972-2013. Gross Domestic Product (GDP), export performance (EXP), Foreign Direct Investment (FDI), and Gross Fixed Capital Formation (GFCF) are considered to capture the objective of the study. The study methodology includes some systematic steps. As the data used in the study is time-series in nature, the author employs unit root tests, and in this case, Augmented Dickey-Fuller (ADF) and Phillips-Perron (PP) tests are used. Then Johansen’s cointegration test, Granger causality test, regression with Newey-West Standard Error and Vector Error Correction Model (VECM) are applied. By using the ADF and PP test the study reveals that the variables of four-time series are integrated of I (1) i.e. they are stationary at first difference. Regression analysis result demonstrates that FDI has a positive effect on economic growth. The Granger Causality test discloses that there is a unidirectional relationship between FDI and economic growth. But the VECM estimation finds that in the long run FDI negatively affects economic growth.

This study examined the spatial-temporal distribution of sulfur and iron compounds (dissolved sulfide, iron sulfide, and ionized iron) in sediments from April 2015 to March 2016 at four stations in Mikawa Bay, Japan. Seasonal changes were observed in dissolved sulfide, iron sulfide, and ionized iron in the upper part of the sediment (0–4 cm depth) at all stations. The maximum concentration in the upper part of the central bay was 2.8 mmol L-1. The maximum values of dissolved sulfide (ranging from 1.4 to 8.1 mmol L-1) at stations located in a water way varied among stations. The iron sulfide concentration in the upper part of the sediment at a station where dissolved sulfide concentration in the waterway was relatively low exceeded that at other stations in the waterway during spring to summer. Ionized iron concentration was highest at the station where the dissolved sulfide concentration was low. The study results suggest that iron plays an important role in determining the magnitude of dissolved sulfide accumulation in sediments by binding with dissolved sulfide. The results imply the possibility of mitigating the accumulation of free sulfides, which causes extreme hypoxia, by artificially adding sufficient iron to the seabed.

The Ni-Co-Cr-W-Mo system is critical for the design of nickel-based super-alloys. This system stabilizes different topologically close packed (TCP) phases in many of the commercially super-alloys with high W and Mo contents. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermodynamic calculations are applied to investigate the thermodynamics of the precipitates in two different W content Ni-Co-Cr-W-Mo super-alloys. Computational thermodynamics verified experimental observation of the f u phase formation as a function of temperature and alloy chemistry, but the kinetics for the precipitation of M6C phase do not agree with the experimental findings. The major precipitates of alloy 1 at temperatures 700 and 750 °C during long time exposure are M23C6, γ′ phase, and MC, and alloy 2 are M23C6, γ′ phase, MC, M6C and u phase. The W addition is found to promote the precipitation of M6C and u phase during exposure. The M6C has higher W and lower Ni content than that of u phase, meanwhile, M6C is an unstable phase would transform into M12C after 5000 h exposure at 750 °C. A great quantity of needle-like u phases precipitated after exposure at 750 °C for 5000h, which have no effect on the impact property of alloy 2.

Keywords: underground engineering; numerical simulation; excavation length effect, major principal stress; displacement; damage initiation; CPU time

Explosive boiling is a fast phase transition from an ultra-thin liquid film to vapor under an extremely high heat flux, which typically has been studied using molecular dynamics simulation (MDS) method. The present MDS study investigated the explosive boiling of a liquid argon nanofilm over different solid copper surfaces with different nanowall patterns including parallel and cross nanowalls. For each surface, atomic motion trajectories, number of liquid and vapor argon atoms, heat flux, and, mainly, onset time of explosive boiling were investigated. The simulation results indicated that explosive boiling occurs earlier on parallel and cross nanowall surfaces than on an ideally smooth surface, regardless of the topology and configuration of nanowalls. Moreover, the results revealed that by using the cross nanowall surfaces, the onset time of explosive boiling decreased by 0.7–4% compared to the parallel nanowall surfaces. In addition, it was found that the onset time of explosive boiling strongly depends on the potential energy barrier and the movement space between nanowalls for both parallel and cross nanowall surfaces. Furthermore, simulation findings showed that even though increasing the height of cross nanowalls increases heat flux and temperature of the fluid argon domain, it does not necessarily result in a shorter onset time of explosive boiling. These findings demonstrate the capability of cross nanowall surfaces for explosive boiling, thereby could be utilized in future surface design for thermal management applications.

Background: Transit-time flow measurement (TTFM) is frequently used to evaluate intraoperative quality control during coronary artery bypass grafting (CABG). Although TTFM has the ability to assess graft failure intraoperatively, the perioperative factors affecting TTFM during CABG surgery remain poorly understood. Methods: Patients who underwent CABG surgery at a single institution between July 2016 and May 2018 were prospectively evaluated. Patients’ demographic characteristics, previous medical history, Euroscore, the results of preoperative blood tests, and intraoperative data were recorded. TTFM and blood viscosity were measured hemodynamically, and mean flow (mL/min) and pulsatility index (PI) were recorded. Arterial blood gas was analyzed immediately after anastomosis of the left internal mammary artery (LIMA) to the left descending artery (LAD) and before sternal closure. Factors associated with TTFM were assessed by multiple linear regression analysis. Results: Of the 62 patients who underwent CABG surgery during the study period, 57 were evaluated, including 49 who underwent off-pump and eight who underwent on-pump surgery. Blood viscosity was not significantly associated with TTFM (p > 0.05). However, TTFM was significantly associated with body mass index (BMI), systolic blood pressure, and cardiac index (p < 0.05 each). Conclusions: Blood viscosity was not significantly associated with intraoperative graft flow. Blood flow of graft vessels, however, was significantly associated with BMI, systolic blood pressure, and cardiac index.

Many engineered approaches have been proposed over the years for solving the hard problem of performing indoor localisation using smartphone sensors. However, specialising these solutions for difficult edge cases remains challenging. Here we propose an end-to-end hybrid multimodal deep neural network localisation system, MM-Loc, relying on zero hand-engineered features, learning them automatically from data instead. This is achieved by using modality-specific neural networks to extract preliminary features from each sensing modality, which are then combined by cross-modality neural structures. We show that our choice of modality-specific neural architectures is capable of estimating the location with good accuracy independently. But for better accuracy, a multimodal neural network fusing the features of early modality-specific representations is a better proposition. Our proposed MM-Loc solution is tested on cross-modality samples characterised by different sampling rates and data representation (inertial sensors, magnetic and WiFi signals), outperforming traditional approaches for location estimation. MM-Loc elegantly trains directly from data unlike conventional indoor positioning systems, which rely on human intuition.

The purpose of the study was to investigate the bacterial viability of the initial biofilm on the surface of experimental modified dental resin composites. Twenty-five healthy individuals with good oral hygiene were included in this study. In a split-mouth design, they received acrylic splints with five experimental composite resin specimens. Four of them were modified with either a novel polymeric hollow beads delivery system or methacrylated polymerizable Irgasan (Antibacterial B), while one specimen served as unmodified control (ST). The delivery system based on Poly-Pore® was loaded with one of the active agents Tego® Protect 5000 (Antiadhesive A), Dimethicone (Antiadhesive B) or Irgasan (Antibacterial A). All study subjects refrained from toothbrushing during the study period. Specimens were detached from the splints after 8h and given a live/dead staining before fluorescence microscopy. Friedman test and post-hoc Nemenyi test were applied with significance level at p &lt; 0.05. In summary all materials but Antibacterial B showed a significant antibacterial effect compared to ST. In conclusion dental resin composites with Poly-Pore loaded active agents show antibacterial effectiveness in situ.

Wood has been used in the construction, furniture, and automotive industries since ancient times. In areas where wood material is used, it is combined with various fasteners. The durability of the products produced using wooden materials depends on the performance of the fasteners. Since wood is a hydroscopic and biodegradable material, various changes occur in its structure when exposed to external weather conditions. Wood materials used especially in the field of construction and urban furniture are exposed to effects such as extreme temperatures, freezing, moisture, or drying depending on the seasons. In this study, the effect of freeze-thaw cycling (FTC) process on screw direct withdrawal resistance (SDWR) of plywood produced from beech, ozigo, and okoume species was investigated. In this context, the effects of screwing time (before or after), screw orientation (face or edge), number of cycles (0 to 7) in the FTC process and plywood type parameters on SDWR were investigated. As a result of the tests, when the mean SDWR values were examined according to the plywood type, the highest values were obtained in beech, ozigo, and okoume plywood, respectively. Considering the screwing time parameter, it was determined that there was no statistically significant difference between the mean SDWR values in other plywood types except beech plywood (p&lt;0.05). When the screw orientation parameter is examined, screwing in the face direction gave better results than screwing in the edge direction in all plywood types. There was a decrease in the mean SDWR values inversely proportional to the increase in the number of cycles in FTC-treated plywood.

Ethiopia is one of the countries with the highest level of malnourishment of lactating mothers in sub-Saharan Africa. However, different communities produced different foods solely for lactating mothers. "Shameta" is one of the cereal-based fermented cultural foods exclusively produced for lactating mothers with the perception that it would support the health, strength, and recovery of mothers. This study investigated the effects of fermentation time and blending ratio on the nutritional quality of "Shameta." Three levels of blending ratio of ingredients (Maize-Barley-Fava bean) and three levels of fermentation times were laid down in a completely randomized design (CRD). The study showed that lactic acid bacteria were the dominant group, followed by yeasts. Notably, the ingredient formulation ratio of Maize-Barley-Fava bean (81:5:5) in all fermentation times (8, 10, and 12 days) results in the highest LAB dominance with the highest crude fat (13.23 g/100g) content. However, the highest crude protein (16.56 g/100g) and mineral contents were observed in a ratio mix of 66:10:15 fermented for 12 days. The nutritional quality of culturally prepared Shameta can be improved by optimizing fermentation time and ingredient compositions for better recovery, strength, and health of lactating mothers.

Accurate determination of the concentration of alcohols and their metabolites is important in forensics and in several life science areas. A new method has been developed to quantify alcohols and their oxidative products using a headspace gas chromatography- mass spectrometer and isotope-labelled internal standards. This work demonstrates the application of this method, specifically in quantifying the concentration of oxidative products of alcohol and other minor alcohols found in hand sanitizers, which have become an essential household item since the COVID-19 pandemic. Apart from the major component, the minor alcohols found in hand sanitizers include methanol, isopropanol, and n-propanol. In ethanol-based hand sanitizers, a significant amount of acetaldehyde was observed as an oxidation product, while in isopropanol-based hand sanitizers, acetone was observed. The concentration of acetaldehyde in ethanol-based hand sanitizers significantly increased with storage time and temperature, whereas no such increase of acetone concentration was observed in isopropanol-based hand sanitizers with storage time and temperature.

Structural and morphological properties of the hydronium-potassium jarosite microstructures were investigated in this work, and their electrical properties were evaluated. All microstructures were synthesized at a reasonable temperature of 343 K with a reduced reaction time of 3 hours. Increase in the pH from 0.8 to 2.1 decreased the particle sized from 3 µm to 200 nm and increasing the aging time from 0, 3 to 7 days resulted in semispherical, spherical and euhedreal jarosite structures, respectively. A Rietveld analysis also was done, finding that increasing pH, the amount of hydronium substitution by potassium in the cationic site also increases, having a 77.72 % of hydronium jarosite (JH) plus 22.29 % potassium jarosite (JK) at pH 0.8; 82.44 % (JH) and 17.56 % (JK) at pH 1.1, and 89.98 % (JH) plus 10.02 % (JK) at pH 2.1. The results obtained in this work show that the obtained hydronium potassium jarosite microstructures with reduced particle size and euhedreal morphology can be used as anode materials for improving the life time of lithium ion batteries, due that during the analysis of the voltage obtained using electrodes made with this particles and graphite, this ranged from 0.89 to 1.36 V.

During the casting in a warmer tropical temperature, a setting time delay is required to maintain the workability of the concrete, commonly achieved by the addition of admixtures i.e. silica fume (SF), fly ash (FA), and Plastrocrete®. However, high sugar content Coca-Cola in niche conditions is proposed as an ingredient for delaying concrete setting time in combination with conventional admixtures. This research aims to compare the setting time of admixtures from Coca-Cola and Plastocrete® RT6 plus in concrete mixing with control data of concrete mixed with SF or FA. The second aim is to measure the compression strengths between combinations of Coca-Cola and Plastocrete® RT6 plus. Concretes were produced with admixtures of SF, FA, Plastocrete® RT6plus, or Coca-Cola. The concrete used to control was f'c20 and f'c 25, while other concrete mixes were produced with the addition of Coca-Cola at 0.15% from the weight of cement at variation of moisture treatments. The first method to produce concrete (f'c20+Plas0.23%+Cola0.15% and f'c25+Plas0.23%+Cola0.15%) did not employ water reduction. The second concrete productions (f'c25+Plas0.46%+Cola0.15% and f'c25+Plas0.46%+Cola0.15%) reduced the addition of water at 8.8% (v/w). The first concrete production method had a setting time 44% longer than control. The reduced water concrete in the second productions had a setting time 34% longer than control. Meanwhile, the Plastocrete® RT6 Plus admixture with the reduced water delayed the concrete setting time by 26% longer than control. The delayed setting time of Plastocrete® RT6 Plus admixture with reduction of water was shorter than in the treatment with Coca-Cola. The combination of the addition of Coca-Cola with Plastocrete® RT6 plus by reducing the amount of adding Coca-Cola to 0.10% with Plastocrete® RT6 plus can delay concrete setting time by 51% longer than normal concrete and increase concrete compressive strength by 13% higher than normal concrete. Mixing Coca-Cola with Plastocrete® RT6 plus not only provided an optimal delay effect on setting time but also significantly increase the compressive strength that was desired during the casting in warm tropical weather applied in building construction of Mulawarman University, Samarinda, Indonesia.

By shifting eating hours from daytime to nighttime, Ramadan intermittent fasting (RIF) illustrates how religious beliefs influence human dietary behavior and subsequent anthropometric and metabolic measures. This study aimed to investigate socioeconomic characteristics and examine how observing RIF affects dietary intake, anthropometric indices, and metabolic markers in healthy premenopausal (PRE-M) and post-menopausal (POST-M) Saudi women. Before starting the study, the authors hypothesized that the RIF improves some nutritional aspects and health in respondents, but not after breaking the fast.. The study includes 62 women (31 PRE-M, 21-43 years, and 31 POST-M, 44-68 years). A structured questionnaire was used to collect socioeconomic data. Physical activity, anthropometric, dietary, and biochemical assessments were undertaken before RIF and at the end of the third week of Ramadan fasting month. Socioeconomic data varied among respondents. Observing RIF was associated with significantly (at either p ≤ 0.01 or p ≤ 0.05) lower intake of calories, macronutrients, minerals (except for Na), and vitamins than before RIF for both groups. In terms of body mass index (BMI), and waist-to-height ratio (WHtR) for PRE-M, the percentage of overweight decreased significantly (p≤0.01) while obesity remained unchanged. In contrast, for POST-M, the percentage of overweight increased significantly (p≤0.05), but obesity decreased after RIF. Both groups' waist-to-hip ratio (WHR), body fat (BF), and fat mass (FM) decreased after RIF. High-density lipoprotein cholesterol (HDL-C), fasting blood glucose (FBG), triglycerides (TG), and blood pressure (SBP, DBP) were generally maintained at acceptable normal levels in most responders before and after RIF. However, low-density lipoprotein cholesterol (LDL-C) was significantly decreased during RIF than before, especially for POST-M. Age, occupation, and monthly income were the most important factors influencing women’s nutritional status and body fat. In conclusion, observing RIF by PRE- and POST-M Saudi women was associated with significant improvements in variable health indicators, with a few exceptions, particularly POST-M, and may help lower risk factors for chronic diseases.

In this study, the effect of hot stamping forming process on the properties change of compound layer in Al–Si coated high-strength steel sheet with different thickness was investigated. The coating layer in hot stamped high-strength steel sheet was composed of a diffusion layer and a compound layer. As the hot stamping temperature and holding time for forming increased, the thickness of the compound layer in the Al–Si coated high-strength steel sheet increased. The thickness of coating layer with the hot stamping for 500 sec at 890, 910 and 950 °C was obtained 8.9, 11.8, and 20.6 micrometer, respectively. The thickness of coating layer with hot stamping for 180, 500 and 550 sec at 910 ^oC was obtained 5.7, 11.8, and 17.8 micrometer, respectively. The compound layer in hot stamped high-strength steel sheet with Al–Si coating layer consists of Al_5.4Fe₂ and Fe₂Si phases. In the compound layer, Al and Si were irregularly distributed.

This study numerically analyzed the effect of composition and temperature and oxygen concentration changes on the selfignition characteristics of n-heptane/methane blended fuels in order to cope with development of alternative fuels and international environmental regulations. CHEMKIN-PRO is used as the analysis program and the LLNL model is used as the reaction model. The numerical results revealed that on autoignition and ignition delay time were sensitive to changes in fuel composition and oxygen concentration. As the methane ratio increases, OH radicals causing ignition are delayed in generation and the concentration is lowered, thus longer the ignition timing. The oxygen concentration in the mixed fuels are changed to simulate the exhaust gas recirculation and a numerical analysis in then performed. As the oxygen concentration decreases, the ignition delay time longer because the nitrogen gas acts as a thermal load in the combustion chamber.

Tree nuts show nutritional properties and human health benefits. However, they contain allergenic proteins, which make them harmful to the sensitised population. The presence of tree nuts on food labelling is mandatory and, consequently, the development of suitable analytical methodologies to detect nuts in processed foods is advisable. Real-time PCR allowed a specific and accurate amplification of allergen sequences. Some food processing methods could induce structural and/or conformational changes in proteins by altering their allergenic capacity, as well as produce the fragmentation and/or degradation of genomic DNA. In this work, we analysed by means of Real-time PCR, the influence of pressure and thermal processing through Instant Controlled Pressure Drop (DIC) on the detectability of hazelnut,pistachio and cashew allergens have been tested. The detection of targets in hazelnut, pistachio and cashew (Cor a 9, Pis v 1 and Ana o 1, respectively) is affected by the treatment, in different extent depending on the tree nut. Results are compared to those previously obtained by our group in the analysis of different treatments on the amplificability of the same targets. Reduction in amplificability is similar to that reported for some autoclave conditions. Our assays might allow detecting up to 1000 mg/kg of hazelnut, pistachio and cashew flours after being submitted to DIC treatment in food matrices.

The influence of cuff inflations on nighttime measurements during 24h ambulatory blood pressure (BP) measurements is unknown. We investigated the potential effect of cuff-inflations on asleep parameters using measurements taken simultaneously with a cuffless device using pulse-transit-time (PTT). On the first day of measurement, standard cuff-based 24h BP and cuf-fless measurements were simultaneously performed on right and left arms (CUFF/PTT-D). 1-2 days after the first measurement, the cuffless device was worn alone (PTT-D). Only data from the cuffless device was analyzed. The following mean asleep parameters were analyzed: systolic and diastolic BP, arousals, sleep efficiency, total arousals, arousal per hour and desaturations. 21 in-dividuals were prospectively enrolled. Mean (SD) age was 47(±15) years and 57% were female. Mean systolic asleep BP for the during CUFF/PTT-D and during PTT-D were 131(±21) and 131(±26) mmHg respectively. Mean diastolic asleep BP values during CUFF/PTT-D and during PTT-D were 80(±14) and 84(±14) mmHg respectively (p=0.860, p=0.100 respectively). Systolic and diastolic asleep mean difference was 0.1 (±18.0) and -3.6 (±9.8) mmHg, respectively. There were significantly more total arousals during PTT-D (p=0.042). There was no significant difference seen in sleep efficiency (p=0.339) or desaturations (p=0.896) between the two measurements. We could not show any significant impact from cuff inflations during asleep PTT-D measurements.

To address the trajectory tracking issue for quadrotors working under the influence of external disturbances, a control scheme is designed for position and attitude trajectory tracking. Firstly, the quadrotor dynamic model is derived for control design. Secondly, adaptive integral backstepping control (AIBS) is employed in the position loop in which adaptive estimation is used to estimate the upper bounds of disturbances. Subsequently, a new adaptive backstepping fast nonsingular integral terminal sliding mode control (ABFNITSM) is proposed to follow desired Euler angles. The intro-duction of fast nonsingular terminal sliding mode and integral element is to realize fast convergence and accurate tracking. Dead zone technique is applied to minimize estimation errors. Besides, a saturation function is utilized to eliminate chattering phenomenon. Finally, simulation experiments are conducted under the Simulink environment. The proposed control is verified by comparing it with traditional integral terminal sliding mode control (ITSM) and integral backstepping control (IBS).

Brain death (BD) concept has been increasingly widely accepted beginning since the late 1950s, but several controversies have appeared when intracranial pathology is localized to the posterior fossa. In the presence of a primary supratentorial brain lesion, a severe forebrain lesion is combined with either the subsequent gradual loss of brainstem function, due to rostrocaudal transtentorial brain herniation. In secondary brain lesions (i.e., cerebral hypoxia), the brainstem is also affected like the forebrain. However, a minority of patients with a primary infratentorial brain lesion (i.e., basilar artery thrombosis or brainstem or cerebellar bleeds) may retain cerebral blood flow and EEG activity. In this article I discuss that if a brainstem lesion does not provoke a massive increase of intracranial pressure there may be no complete cerebral circulatory arrest, explaining the preservation of EEG activity, evoked potentials, and autonomic function. I also discuss the case of Jahi McMath who was declared brain-dead, but ancillary tests, performed 9 months after initial brain insult, showed conservation of intracranial structures, EEG activity, and autonomic reactivity to “Mother Talks” stimulus, rejecting the diagnosis of BD. Jahi McMath’s MRI study demonstrated a huge lesion in the pons. Some authors have argued that in patients with primary brainstem lesions it might be possible to find a in some cases partial recover of consciousness, even fulfilling clinical BD criteria. This was the case in Jahi McMath. Further research and discussion are necessary about the use of ancillary tests in BD diagnosis in primary posterior fossa lesions.

Background: Globally, hot cooked refined rice is consumed in large quantities and is a major contributor to dietary glycaemic load. This study aimed to compare the glycaemic potency of hot and cold stored parboiled rice to widely available medium grain white rice. Method: Twenty-eight healthy volunteers participated in a three treatment experiment where postprandial blood glucose was measured over 120 minutes after consumption of 140g of rice. Three rice samples were freshly cooked medium-grain white rice, freshly cooked parboiled rice, and parboiled rice stored overnight at 4 ºC. All rice was served warm at 65 ºC. Chewing time was recorded. Results: The 24-hours cold-stored and reheated parboiled rice resulted in a 42% and 12% lower blood glucose concentration trajectory than freshly cooked medium-grain white rice and freshly cooked parboiled rice. Chewing time for 10g cold stored parboiled rice was 6 seconds (25%) longer and was considered more palatable, visually appealing and better tasting than freshly cooked medium grain (all P<0.05). Conclusions:. For regular consumers of rice reheating cooked rice after cold storage would lower the dietary glycaemic load and long term may reduce risk for type 2 and gestational diabetes. More trials are needed to identify the significance.

Milling machines have made denture fabrication possible with high accuracy in a short time. However, the relationship between the milling conditions, accuracy, and milling duration has not been clarified. This study aimed to clarify the effects of milling conditions on surface roughness and milling duration. The specimen was designed using a CAD software, and milled using PMMA disks. In milling, the parameters of finishing the specimen surface were adjusted. Three different spindle speeds and four different feed rates were set. Twelve combinations of each parameter were used for milling, and the surface roughness and milling duration were measured. Results showed that the surface roughness significantly increased with the feed rate on the slopes of the specimen. The surface roughness differed with the spindle speed on the left and right slopes. The spindle speed and feed rate did not affect the surface roughness on the flat surface. The milling duration was not affected by spindle speed but decreased as the feed rate increased. In conclusion, by increasing both the spindle speed and feed rate, the milling duration could be shortened while maintaining a constant surface quality. The optimum milling conditions were a spindle speed of 40,000 rpm and feed rate of 3,500 mm/min.

Physical Unclonable Functions (PUFs) based on the retention times of the cells of a Dynamic Random Access Memory (DRAM) can be utilised for the implementation of cost-efficient and lightweight cryptographic protocols. However, as recent work has demonstrated, the times needed in order to generate their responses may prohibit their widespread usage. In order to address this issue, the Row Hammer PUF has been proposed by Schaller et al. [1], which leverages the row hammer effect in DRAM modules to reduce the retention times of their cells and, therefore, significantly speed up the generation times for the responses of PUFs based on these retention times. In this work, we extend the work of Schaller et al. by presenting a run-time accessible implementation of this PUF and further reducing the time required for the generation of its responses. Additionally, we also provide a more thorough investigation of the effects of temperature variations on the the Row Hammer PUF and briefly discuss potential statistical relationships between the cells used to implement it. As our results prove, the Row Hammer PUF could potentially provide an adequate level of security for Commercial Off-The-Shelf (COTS) devices, if its dependency on temperature is mitigated, and, may therefore, be commercially adopted in the near future.

This work investigated the isothermal holding time dependence of the densification, microstructure, weight loss and tensile properties of Fe-Mn-Si powder compacts. Elemental Fe, Mn and Si powder mixtures with a nominal composition of Fe-28Mn-3Si (in weight percent) were ball milled for 5h and subsequently pressed under a uniaxial pressure of 400 MPa. The compacted Fe-Mn-Si powder mixtures were sintered at 1200 ℃ for 0, 1, 2 and 3 h, respectively. In general, the density, weight loss and tensile properties increased with the increase of isothermal holding time. A significant increase in density, weight loss and tensile properties occurred in the compacts isothermally holding for 1 h, as compared to those with no isothermal holding. However, further extension of isothermal holding time (2 and 3 h) only played a limited role in promoting the density and tensile properties. The weight loss of the sintered compacts was mianly caused by the sublimation of Mn in Mn depletion region on the surface layer of the sintered Fe-Mn-Si compacts. The length of the Mn depletion region increased as isothermal holding time increased. A single α-Fe phase was detected on the surface of all the sintered compacts, and the locations beyond the Mn depletion region were comprised of a dual dominant γ-austenite and minor ε-martensite.

Einstein’s publication of the Special Theory of Relativity in 1905 gave birth to the space-time model as a fundamental arena of the universe. Time has become 4th dimension of space and theoretically one could move backward and forward in time. Hypothetical time travel has been a hot topic of scientific discussion since Kurt Gödel published his article about closed time-like curves (CTC) in 1949. He was aware that his CTC model confirms that there is no physical time. Physicists understood his model as a theoretical frame for time travel. Recent research confirmed that universal space is time-invariant. Motion happens only in space and time is the duration of motion. Nobody can travel in time because time has no physical existence. Time as duration is an emergent physical quantity entering existence in the process of measurement of the duration of material change with clocks. The universal space is utterly timeless. There is no physical time in the universe.

This study sought to investigate steel frames’ performance with dual lateral loader system (Frame bending + bracings of divergent and convergent) in near and far filed to fault. In order to this, four categories of steel frame with dual system with 8, 10 and 12 story are designed with average formation based on existing seismic regulation in 2800 standard of Iran and tenth chapter of national regulations of construction (planning and performing steel construction). Time history non-linear dynamic analysis under the effect of near and far field earthquakes has been done on plan’s models. Then the maximum of floors’ dislocation, floors’ drift, roof dislocation, base shear and energy curves of frames are shown and compared with each other. All non-linear time history analyses have been accomplished using PERFORM 3D software.

Laser metal deposition with wire (LMD-w) is a developing additive manufacturing (AM) technology that has a high deposition material rate and efficiency, and is suitable for fabrication of large aerospace components. However, control of material properties, geometry, and residual stresses is needed before LMD-w technology can be widely adopted for the construction of critical structural components. In this study, we investigated the effect of interlayer cooling time, clamp constraints, and tool path strategy on part distortion and residual stresses in large-scale laser additive manufactured Ti-6Al-4V components using finite element method (FEM). The simulations were validated with the temperature and the distortion measurements obtained from a real LMD-w process. We found that a shorter interlayer cooling time, full clamping constraints on the build plates, and a bidirectional tool path with 180⁰ rotation minimized part distortion and residual stresses and resulted in symmetric stress distribution.

This article presents a harmonic analysis of the stator currents of a squirrel-cage in-15 duction motor fed by a voltage source inverter with PWM space vector control (SV-PWM). The 16 influence of PWM switching frequency and dead time (dead-band) of controlled transistors on 17 THD and electromagnetic torque ripple is shown. The aim is to determine the lowest switching 18 frequency of the transistors for which the drive will operate correctly. Characteristics were de-19 termined as functions in the form of THD ( ), where the least square approximation was 20 used for stator current measurements when the PWM switching frequency is changed. The ap-21 proximations were realized for simulation and experimental results. To clarify the results, the 22 operation of hardware PWM circuits in microcontrollers was analyzed.

Climate change is expected to increase the frequency and severity of abiotic stresses that lead to loss of crop yield. We investigated the effect of salinity (S), short episodes of high temperature (HS) and combination of S+HS at the reproductive phase on dead pericarps properties and yield of the crop plant Brassica juncea. Three intervals of HS resulted in massive seed abortion; seeds from salt-treated plants germinated poorly. Pericarp extracts of salt-treated plants reduced seed germination of B. juncea; all pericarp extracts completely inhibited seed germination of tomato and Arabidopsis; removal of pericarp extracts restored seed germination. HS reduced all metabolites accumulated in dead pericarps, except for upregulation of isomaltose and cellobiose. Salt induced alteration in metabolite levels including increase in proline, reduction in TCA intermediates and changes in phytohormone levels. Proteome analysis revealed hundreds of proteins stored in dead pericarps whose levels and composition were altered under salt stress. The integration of metabolic and proteomic data showed that changes in metabolites were highly correlated with changes in proteins involved in their biosynthetic pathways. Thus, besides providing a physical shield for seed/embryo protection dead pericarps store beneficial substances whose levels, composition and biological function are altered under stress, further highlighting the elaborated function of dead organs enclosing embryos in seed biology and ecology. The detrimental effect of HS on crop production might have implications for global food security in the face of climate change.

Research has shown that emotional states may influence the subjective experience of time. The present study involved 111 healthy adult participants and examined the impact of emotional stimuli on time perception, using a time estimation task with four conditions: in one of the conditions, participants estimated the exposure time of a black screen, wherein the duration could vary be-tween 2 to 7 s (condition without emotional interference); in the other conditions, participants es-timated the exposure time (also ranging from 2 to 7 s) of images that would induce pleasant, un-pleasant, or neutral emotions, to which participants were instructed to focus their attention (pleasant, unpleasant, or neutral emotions). The results showed that participants estimated “shorter” time intervals (underestimation) for pleasant and unpleasant images compared to the condition without interference, but no significant differences were found between the neutral condition and the condition without interference. It is suggested that increased attention to an ex-ternal stimuli, regardless of its emotional valence, produces an underestimated perception of time.

We consider the problem of scheduling $n$ jobs with identical processing times and given release as well as delivery times on $m$ uniform machines. The goal is to minimize the makespan, i.e., the maximum full completion time of any job. This problem is well-known to have an open complexity status even if the number of jobs is fixed. We present a polynomial-time algorithm for the problem which is based on the earlier introduced algorithmic framework blesscmore (``branch less and cut more''). We extend the analysis of the so-called behavior alternatives developed earlier for the version of the problem with identical parallel machines and show how the earlier used technique for identical machines can be extended to the uniform machine environment if a special condition on the job parameters is imposed. The time complexity of the proposed algorithm is $O(\gamma m^2 n\log n)$, where $\gamma$ can be either $n$ or the maximum job delivery time $q_{\max}$. This complexity can even be reduced further by using a smaller number $\kappa<n$ in the estimation describing the number of jobs of particular types. However, this number $\kappa$ becomes only known when the algorithm has terminated.

In mobile applications such as geomagnetic surveying, two major effects hamper the use of optically pumped magnetometers: dead zones, sensor orientations where the sensors signal amplitude drops; and heading errors, a dependence of the measured magnetic field value on the sensor orientation. We present a concept for an omnidirectional magnetometer to overcome both these effects. The sensor uses two cesium vapor cells, interrogated by circularly-polarized amplitude-modulated laser light split into two beams running perpendicular to each other. This configuration is experimentally investigated using a setup wherein the laser beam and magnetic field direction can be freely adjusted relative to each other within a magnetically shielded environment. We demonstrate that a dead-zone free magnetometer can be realized with nearly isotropic magnetic-field sensitivity. While in the current configuration we observe heading errors emerging from light shifts and due to the nonlinear Zeeman effect, we introduce a straightforward approach to suppress these systematic effects in an advanced sensor realisation.

Abstract: rainfall is the main driver of soil erosion. With the daily rainfall, riverine flow discharge and sediment load in the upper Lianjiang River watershed from 1990 to 2020, extreme rainfall events were defined by the 95th percentile method and minimum event interval time (MIT), change trends and mutations of yearly rainfall, riverine flow discharge and sediment load were identified using the Mann-Kendall test, then the optimum lag response time and antecedent rainfall were investigated with the multiple linear regression. The results showed that (1) the sediment changed significantly and abruptly in 1995 due to the expansion of the garden land. (2) Compared with ordinary rainfall, extreme rainfall events explained more variations of riverine flow and sediment with a higher degree, and had a more significant effect on the lag time of runoff and sediment. (3) Garden land expansion in extreme rainfall scenarios resulted in longer lag times for runoff and sediment and decreased demand for antecedent rainfall with more pre-event time. Therefore, taking the rainfall event as a breakthrough, analyzing the antecedent rainfall and the lag response of riverine flow discharge and sediment load is conducive to revealing the response mechanism of riverine flow discharge and sediment load and improving the simulation accuracy of riverine flow and sediment under extreme rainfall condition, thus help for the soil erosion control under extreme rainfall.

The article presents results of research consisting in an attempt to assess the influence of temperature, heating time and cooling method on microstructure and residual strength properties of steel previously tempered during the production process. Simulated environmental conditions to which high-strength bolts, commonly used in steel construction, were subjected, were intended to reflect conditions of a natural fire that may occur in public facilities where the obligation to ensure safety of users and rescue teams is of key importance, also required by law. Furthermore, the tests carried out also comprised a simulated effect of a rescue and firefighting operation using shock, rapid cooling of some of the heated bolts. Samples cut out from the tested bolts, after they were properly prepared, were subjected to microstructural tests using light microscopy, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), phase analysis with the use of an X-ray diffractometer (XRD) and quantitative analysis of the microstructure involving, inter alia, measuring the surface area of grains, their equivalent diameter and mean diameter. As a result of the tests, considerable microstructure changes were identified occurring in the bolt material as a result of exposing it to fire conditions, leading to a change in key, from the point of view of structural safety, mechanical properties. The results of the microstructure tests were compared with the results of previous strength tests, including hardness of the material after the heat treatment and the residual tensile strength of the material Rm. A conducted comparative analysis showed a significant effect of all such factors as the temperature level of the simulated fire, its duration and the fire-fighting method on the mechanical properties of bolts. Results obtained were provided with required comments and the concept of using the microstructure for the post-fire assessment of steel structures was referred to.

In Einstein’s Special Relativity(SR), time is treated as one of the four dimensions within spacetime and is relative in nature. Typically, a photon clock serves as the illustrative device in the time dilation thought experiment, featuring a single photon bouncing between two mirrors. However, the present paper identifies a fundamental flaw in this thought experiment, hence challenging its validity. Contrary to SR, this paper asserts that time is a consequence of motion. Space and time should be treated differently as proposed by classical mechanics. Importantly, this stance does not challenge the concept of curved space in General Relativity (GR), but rather questions the idea of relative time, as employed in both SR and GR. The absence of time dilation also dispels the twin paradox, prompting a necessary reassessment of the second postulate of relativity to ensure a more precise depiction of relativistic effects.

The outstanding occurrences of red wood ant nests (RWA; Formica rufa-group) at two study sites in the Oberpfalz, NE Bavaria, Germany, could be confirmed by the 2023 re-inventory (a total of 5,393 nests and an increase by ≈8 %). RWA nests preferred mature and medium mature pine-dominated forests. Standing and downed dead wood do not negatively influence nests. Nest counts with woodpecker cavities and the diversity of the herb layer increased. The highly clustered nests in NW-SE direction suggests a strong interaction between nests distributions and the tectonic environment. Our developed (re-)inventory approach in combination with the comprehensive photo database is a valuable tool for a) monitoring the entire forest habitat including woodpecker cavities and dead wood in, at and around nests, and b) identifying GeoBio-Interactions. Such a comprehensive approach leads to more accurate and realistic counts of RWA nests during (re-)inventories and provides scientific evidence of the status quo of RWA occurrence. Our results disproved the unfounded and scientifically unsubstantiated blanket statement by laymen of the ASW Landesverband Bayern e.V. that RWA nest numbers in the Oberpfalz or even in the entire Bavaria are in sharp decline. We suggest seven to eight years as a suitable time interval for re-inventories.

Time, traditionally viewed as a linear, non-dynamic parameter, is re-envisioned in this study as a Hyperdimensional concept. This paper conducts a cross-disciplinary examination, critically analysing the conceptualization of time in classical mechanics, quantum mechanics, and cosmology to propose a ground breaking reconceptualisation that extends beyond conventional frameworks. In classical mechanics, time is perceived as an absolute, continuously progressing backdrop, largely independent of events. Quantum mechanics treats time as a static parameter that does not influence quantum states but provides a framework for their evolution. In cosmology, time is considered a dimension that emerges from the Big Bang and serves as a measure for the universe's expansion, yet it does not interact with the structural dynamics of the cosmos. Challenging the transformative insights of Einstein’s relativity, which merges time with spatial dimensions under extreme conditions, we advocate for a perspective that views time as a Hyperdimensional and universal constant. This perspective posits that time, despite its unique and intrinsic properties, does not dynamically interact with or alter physical phenomena. Instead, it underpins our understanding of phenomena across different scales—from the minutiae of quantum states to the macroscopic dynamics of cosmology—without direct causation or change. A critical examination of time dilation and relativistic assumptions reveals significant discrepancies in traditional interpretations, particularly in how they are applied across different physical contexts. Our findings challenge the uniform applicability of time dilation, suggesting that observed phenomena often attributed to relativistic effects might better be explained through non-relativistic mechanisms such as phase shifts or changes in wavelength rather than temporal dilation. By synthesizing insights from various scientific domains, we advocate for a unified theory that recognizes time as a fundamental, universal dimension that is conceptual and non-interactive. Our goal is to bridge existing gaps between diverse scientific interpretations and promote a more integrated, profound understanding of time's autonomous and intrinsic nature.

Conventional plaque assays rely on the use of overlays to restrict viral infection allowing the formation of distinct foci that grow in time as the replication cycle continues leading to counta-ble plaques that are visualized with standard techniques such as crystal violet, neutral red or immunolabeling. This classical approach takes several days until large enough plaques can be visualized and counted with some variation due to subjectivity in plaque recognition. Since plaques are clonal lesions produced by virus-induced cytopathic effect, we applied DNA fluores-cent dyes with differential cell permeability to visualize them by live cell imaging. We could observe different stages of that cytopathic effect corresponding to an early wave of cells with chromatin-condensation followed by a wave of dead cells with membrane permeabilization within plaques generated by different animal viruses. This approach enables an automated plaque identification using image analysis to increase single plaque resolution compared to crystal violet counterstaining and allows its application to plaque tracking and plaque reduction assays to test compounds for both antiviral and cytotoxic activities. This fluorescent real-time plaque assay sums to those next-generation technologies by combining this robust classical method with modern fluorescence microscopy and image analysis approaches for future applica-tions in virology.

The recent availability of commercial platforms for behavioral analysis in zebrafish larvae based on video-tracking technologies has exponentially increased the number of studies analyzing different behaviors in this model organism to assess neurotoxicity. Among the most commonly used assays in zebrafish larvae are basal locomotor activity (BLA) and visual motor response (VMR). However, the effect of different intrinsic and extrinsic factors that can significantly alter the outcome of these assays is still not well understood. In this work we have analyzed in 143 larvae the influence of age (5-8 days post-fertilization), time of day (8:00, 10:00, 12:00, 14:00; 16:00, 18:00, and 20:00 h), and experiment (three experiments performed at different days) on BLA and VMR results (4,004 analyses for each behavior). Results from both behaviors were adjusted to a Random-Effects linear regression model using generalized least squares (GLS), including in the model the effect of the three variables, the second-way interactions between them and the three-way interaction. The results presented in this manuscript show a specific effect of all three intrinsic factors and their interactions on both behaviors, supporting the view that the most stable time period for performing these behavioral assays is from 10:00 am to 04:00 pm, with some differences depending on age of the larva and the behavioral test.

In this work, the influence of catalyst reuse and reaction time on the yield and quality of organic liquid products (OLP) obtained in a cracking pilot plant at 450 °C and 1.0 atm has been systematically investigated. The distillation of OLP produced 04 (four) distilled fractions. The quality of the biofuels was certified by physical-chemical analysis, as well as FT-IR and GC-MS analysis. The experimental results showed the feasibility of applying the spent sodium carbonate twice in catalytic cracking of vegetable oils. The physical-chemical properties (density, viscosity, acid value, saponification value, and flash point) of OLP decrease as the reaction time increases. The distillation of OLP yields 62.35% (wt.), producing green-like gasoline, kerosene, and diesel fractions rich in hydrocarbons. Therefore, biofuels-like fractions produced by distillation of OLP have a great potential for replacing partially petroleum derived fuels.

Physicists have employed various approaches to solve the “paradox” and offered a consistent conclusion that the traveller twin is younger than the homebody twin. However, some authors attribute the cause of differential aging to acceleration, while others believe that acceleration should not be regarded as the source of differential aging, but frame switch is. So far there is no agreement on this issue. Actually, acceleration and frame switch should not be regarded as the source of differential aging. The author will introduce a thought experiment in which two very long spacecraft are moving in opposite directions at a speed close to the speed of light to discuss the real cause of differential aging. The author found that the real cause of differential aging in the twin “paradox” is because of the asymmetry of destination choice. People always choose their destinations in the universe rather than in spacecraft. The destinations are always stationary relative to the homebody twin and moving relative to the traveller twin. Once we choose a destination in a reference frame, the distance is the proper length in this reference frame, but the distance will contract in another moving reference frame, thus the recording time will be shorter.

This addendum contains clarifications and a sharpening of some of the results on the VIT transform framework developed in [1]. The focus is on the right-coefficient and left- coefficient forms of the transform, the extraction of a first-order term from a left polynomial fraction, and the application to linear time-varying systems.

We have introduced a sign operator of energy, analogous to the operator helicity, but in the direction of what we call energy vector. However, this energy vector needs a time vector. To give physical senses to the components of such a time vector, we try to explain the time dilation in special relativity and try to relate the components of the time vector to the tunneling times when an electron crosses a potential barrier.

Climate change such as sea level rise, change in temperature, precipitation, and storminess are expected to impact significantly coastal lagoons. The nature and magnitude of these impacts are uncertain. The objective of the research is to determine the climate change impacts on mixing and circulation at Songkhla lagoon, Thailand. Songkhla lagoon is the largest lagoonal water resource in Thailand and Southeast Asia. The lagoon is a combined freshwater and estuarine complex of high productivity which represents an extraordinary combination of environmental resources believed to be unique in the region. This work is part of a Climate Change impact assessment framework. It is the validation phase (step 5) of the framework applying a case study. Delft 3D was used to simulate CC scenarios in the climate downscaling models, part of the previous framework steps. These results were compared to the current conditions to determine the main changes in mixing and circulation in the coastal lagoon. Three indicators were applied to quantify the impacts: flushing time, salinity intrusion and stratification. The results suggest an increase in water velocities at the inlet in future scenarios and a decrease of flushing time. Salinity and stratification showed more complex changes in futures scenarios.

A number of experimental tests of time orientability are described as well as clear experimental signatures from non time orientability (time reversal). Some tests are well known, while others are based on more recent theoretical work. Surprisingly, the results all suggest that time is not orientable at a microscopic level; even definitive tests are positive. At a microscopic level the direction of time can reverse and a consistent forward time direction cannot be defined. That is the conclusion supported by a range of well-known experiments. The conflict between quantum theory and local realism; electrodynamics with electric charges; and spin half transformation properties of fermions; can all be interpreted as evidence of time reversal. While particle-antiparticle annihilation provides a definitive test. It offers both a new view of space-time and an novel interpretation of quantum theory with the potential to unify classical and quantum theories.

Can physical objects be in time-symmetry? Physical objects can only exist in a medium that has physical attributes, which means this medium is a type of energy. Is time energy? This article will show that time is not energy and there is no possibility that physical objects could be in time-symmetry. Physical objects only can be in symmetry in the time-invariant space in which they exist. In this perspective time measured with clocks is the result of the observer’s measurement in the time-invariant space. The time-symmetry model is flawed.

Capacity Expansion Models (CEMs) are optimization models used for long-term energy planning on national to continental scale. They are typically computationally demanding, thus in need of simplification, where one such simplification is to reduce the temporal representation. This paper investigates how using representative periods to reduce the temporal representation in CEMs distorts results compared to a benchmark model of a full chronological year. The test model is a generic CEM applied to Europe, equipped with a novel formulation for storage in model versions with reduced temporal representation. We test the performance of reduced models at penetration levels of wind and solar of 90%. Three measures for accuracy are used: (i) system cost, (ii) total capacity mix and (iii) regional capacity. We find that: (i) the system cost is well represented (~5% deviation from benchmark) with as few as ten representative days, (ii) the capacity mix is in general fairly well (~20% deviation) represented with 50 or more representative days, and (iii) the regional capacity mix displays large deviations (>50%) from benchmark for as many as 250 representative days. We conclude that modelers should be aware of the error margins when presenting results on these three aspects.

Today, due to recent developments in technology, children devote plenty of time for screen viewing. However, its harmful effects are not yet clear. The purpose of present study was to examine the associations among screen viewing and sleep duration, and body mass index (BMI) in under-five years old children. This cross-sectional study was conducted with 322 under-five healthy children that were selected using multistage stratified cluster sampling method in 2017. The data that were gathered by time-use diary method were analyzed using Kolmogorov-Smirnov test, Spearman correlation tests, multiple linear regression analysis, one-way ANCOVA, two-way ANCOVA. There was a negative correlation between screen time and sleep duration (rs = -0.42, p = 0.00), positive correlation between screen time and BMI (rs = 0.38, p = 0.00) and sleep duration negatively correlated with BMI (rs = -0.22, p = 0.00). screen viewing was a predictive factor for both sleep duration (β = -0.26, p = 0.00) and BMI (β = -0.26, p = 0.00). screen viewing had a significant impact on sleep duration (4, 314) = 5.02, P = 0.001) and BMI (F (4, 314) = 1.16, P=0.298). Results of this study indicated that screen viewing is related to sleep duration and BMI in under-five children. furthermore, screen time has an impact on sleep duration and BMI scores of children. findings of our study suggest that sleep duration negatively is associated with BMI in under-five-year-old children.

Effects and interactions of incubation time and chick preplacement holding time on mortality at placement, utilization of yolk sac, crop filling rate, early feeding–drinking behavior and broiler live performance were investigated. Ross 308 broiler hatching eggs from a 39-week-old flock were set in two identical setters in a commercial hatchery,with setting time 12 hours earlier in one machine. At the end of incubation, chicks were removed from the hatchers at the same time. Thus, incubation times were either 504 h (normal incubation time (NIT) treatment) or 516 h (longer incubation time (LIT) treatment). After pull time, chicks from each incubation time group were subjected to either 6, 24, 48, 60 or 72 h preplacement holding times. At placement, chicks were given access to feed and water. In total, 19,200 chicks were randomly assigned to a total of 10 subtreatment groups (2 incubation times × 5 preplacement holding times). Therefore, a total of 1,920 chicks were used in each subtreatment group for the grow-out period in a commercial broiler house. An interaction was found between incubation time and preplacement holding time for residual yolk sac (RYS) weight (g, %) (p &lt; 0.001). RYS weight was greater at pull time and at 6 and 24 h of preplacement holding time in the NIT treatment compared to the LIT treatment, while differences were no longer evident at 48–72 h. The lowest percentage of chicks with full crops and eating activity was observed in the shortest preplacement holding time (6 h) group at 3 h after placement. As expected, the initial BW at placement clearly decreased with increasing duration after the pull time (p &lt; 0.05) with the highest and lowest weights were found in the 6 and 72 h holding time treatments respectively. This BW difference was still evident at 35 d after placement and chicks held for the longest period after the pull time (72 h) showed the lowest BW (p &lt; 0.001). However, there was no significant difference between the 6 and 60 h preplacement holding times. Mortality during the first 7 d after placement increased only when the preplacement holding time was extended to 72 h (p = 0.031). Similar to the 7 d results, chicks held for 72 h exhibited higher 0-35 day mortality compared to those held for 6 or 24 h (p = 0.028). Neither BW nor mortality was affected by incubation time treatment at 35 d after placement (p &gt; 0.05). It can be concluded that there were no significant differences in average BW and mortality, up to and including a 60-h holding time under thermal comfort conditions, but a 72-h preplacement holding time resulted in final BW and mortality being negatively affected. In addition, LIT tended to have a beneficial effect on BW and mortality compared to NIT when the preplacement holding time was shorter (6–24 h) but had a negative effect for extended holding times (48–72 h).

On the basis of the findings of this paper, the theories of quantum mechanics and general relativity can be expressed in a comprehensive theory. The events were surveyed length of the time, in the Euclidean six-dimensional space-time (R6=x1+x2+x3+t1+t2+t3). Previous studies have not studied the relationship between the origin of matter's inherent properties, fundamental constants, and quantum mechanics phenomenon with space-time geometry. This theory prediction the with certainty obtained probabilistic results of quantum mechanics. This prediction is on the basis of metric resulting from the Eccentricity of the Ellipse due to the object density, in the length of time. The cause and nature of dark matter and dark energy are the findings of this article.

Noise model selection criteria has a significant impact on identifying the stochastic noise proper-ties of any GNSS daily coordinate time series. The low-frequency random walk noise existing in these time series could lead to overestimation of the tectonic rate, so it is of great significance to accurately detect the random walk component. This study focuses on noise model estimation cri-terion (BIC_tp) derived from the AIC and the BIC by introducing 2π factors. It is more sensitive to abnormal steps (random jumps). Using observation data from 72 GNSS stations from 1992 to 2022 and simulated data, four combined noise models are used to explore the impacts of time se-ries lengths (ranging from2 to 24 years) and data loss (between 2% and 30%) on noise models and velocity estimation. The results show that as the time length increased, the selected optimal noise model, and the estimated uncertainty of the tectonic trend with different data gap, gradually con-verge. When the time length is short (less than 8 years), it could lead to the FNRWWN, FNWN, and PLWN models being mistakenly estimated as GGMWN models, thereby affecting the accura-cy of determining the station velocity parameters. When the time length is 12 years, the RW noise component is more probably detected, As the time length increases, the impact of RW on velocity uncertainty is weakened. Finally, we conclude that for a time series with a minimum time length of 12 years, both the selection of the optimal stochastic noise model and the estimation of the ve-locity parameters are reliable.

The gelation time tg necessary for a solution of functional (associating) molecules to reach its gel point after a temperature jump, or a sudden concentration change, is theoretically calculated as a function of the concentration and temperature for the molecules carrying the number f of functional groups. Quite generally, tg is given by the product of the relaxation time tR and a thermodynamic factor Q. For pairwise cross-linking, and cross-linking with a fixed multiplicity k, precise values of tg are derived. For cross-linking with variable multiplicity, kinetic equation of stepwise association is derived for the reactivity pk of the functional groups, on the basis of which tg and tR are estimated. The thermodynamic factor Q is shown to generate a singularity of logarithmic divergence as the temperature (concentration) approaches the equilibrium gel point, while the relaxation time tR changes continuously across it. The retardation effect on the gelation time due to the reversibility of the cross-linking is explicitly calculated for some specific models of cross-linking. For a micellar cross-linking covering a wide range of the multiplicity, as seen in hydrophobically-modified water-soluble polymers, tR is shown to obey a formula similar to the Aniansson-Wall law.

We are using the book “Towards Quantum Gravity with an article by Claus Kiefer as to a quantum gravity interpretation of the density matrix in the early universe. The density matrix we are using is a one loop approximation, with inflaton value and potential terms, like V(phi) using the Padmanabhan values one can expect if the scale factor is a ~ a(Initial) times t ^ gamma , from early times . In doing so, we isolate out presuming a very small initial time step candidates initial time values which are from a polynomial for time values due to the Kiefer Density value.

In this paper, we study the Parisian time of a reflected Brownian motion with drift on a finite collection of rays. We derive the Laplace transform of the Parisian time using a recursive method, and provide an exact simulation algorithm to sample from the distribution of the Parisian time. The paper is motivated by the settlement delay in the real-time gross settlement (RTGS) system. Both the central bank and the participating banks in the system are concerned about the liquidity risk, and are interested in the first time that the duration of settlement delay exceeds a predefined limit, we reduce this problem to the calculation of the Parisian time. The Parisian time is also crucial in the pricing of Parisian type options; to this end, we will compare our results with the existing literature.

Future cyber-physical systems may extend over broad geographical areas, like cities or regions, thus requiring the deployment of large real-time networks. A strategy to guarantee predictable communication over such networks is to synthesize an offline time-triggered communication schedule. However, this synthesis problem is computationally hard (NP-complete), and existing approaches do not scale satisfactorily to the required network sizes. This article presents a segmented offline synthesis method which substantially reduces this limitation, being able to generate time-triggered schedules for large hybrid (wired and wireless) networks. We also present a series of algorithms and optimizations that increase the performance and compactness of the obtained schedules while solving some of the problems inherent to segmented approaches. We evaluate our approach on a set of realistic large-size multi-hop networks, significantly larger than those considered in the existing literature. The results show that our segmentation reduces the synthesis time up to two orders of magnitude.

In Newtonian mechanics, time as well as space are perceived as absolute entities. In 2 Einstein’s special relativity, time is frame dependent. Time is also affected by gravitational field 3 and as the field varies in space, time also varies throughout space. In the present article, a 4 thermodynamic-based time is investigated. The entity is called "irreversibility", which is generated 5 when availability (also known as exergy) is destroyed. Since each thermodynamic system may 6 generate different amount of irreversibility, this quantity is system dependent. The time’s arrow is 7 automatically satisfied, since irreversibility generation always proceeds in one direction (toward 8 future). We have demonstrated that, like common time, irreversibility is frame dependent, and 9 affected by gravity in the similar manner as the common time. For this reason, we propose to 10 assign the entity irreversibility of the system as thermodynamic time. A possible application of the 11 thermodynamic time is an interpretation and managing of the aging of biological systems. The 12 metabolic efficiency is related to the irreversibility of the chemical processes and affect the aging of 13 the system. Our sensation of time-flow may be attributed to the flow of availability and destruction 14 of it through the living system. It is shown by other authors that entropy generation (equivalent to 15 irreversibility) is a parameter for the human life span. Since the thermodynamic time is based on a 16 concept of thermodynamics that is universal, further applications to other subjects, such as biological 17 clock, telomere, and cosmology are possible.

With the great development of intelligent transportation systems (ITS), travel time prediction has attracted the attentions of many researchers and a large number of prediction methods have been developed. However, as an unavoidable topic, the predictability of travel time series is the basic premise for travel time prediction has received less attention than the methodology. Based on the analysis of the complexity of travel time series, this paper defines travel time predictability to express the probability of correct travel time prediction and proposes an entropy-based method to measure the upper bound of travel time predictability. Multiscale entropy is employed to quantify the complexity of travel time series, and the relationships between entropy and the upper bound of travel time predictability are presented. Empirical studies are made with vehicle trajectory data in an express road section. The effectiveness of time scales, tolerance, and series length to entropy and travel time predictability are analysis, and some valuable suggestions about the accuracy of travel time predictability are discussed. Finally, the comparisons between travel time predictability and actual prediction results from two prediction models, ARIMA and BPNN, are conducted. Experimental results demonstrate the validity and reliability of the proposed travel time predictability.

We explore the field equations in a 4-d complex space-time, in the same way, that general relativity does for our usual 4-d real space-time, forming this way, a new "general relativity" in C⁴ space-time, free of sources. Afterwards, by embedding our usual 4-d real space-time in C⁴ space-time, we describe geometrically the energy-momentum tensor T_μν as the lost geometric information of this embedding. We further give possible explanation of dark eld and dark energy.

A new method for short circuit fault location is proposed based on instantaneous signal measurement and its derivatives, and is based on the retardation phenomena. The difference between the times in which a signal is registered in two detectors is used to locate the fault. Although a description of faults in terms of a lumped circuit is useful for elucidating the methods for detecting the fault. This description will not suffice to describe the fault signal propagation hence a distributed models is needed which is given in terms of the telegraph equations. Those equations are used to derive a transmission line transfer function, and an exact analytical description of the short circuit signal propagating in the transmission line is obtained. The analytical solution was verified both by numerical simulations and experimentally.

How to build an optimal model where three terms “time, causality, and entropy” will be interrelated in a most correct way? This task has a semantic and physical aspect. We give in this article the solution that is based only on elementary perception. In physics, we experience time with our senses as the duration of material change running in space. This fact is the standpoint for our model where causality is only a principle, it is not a physical actuality and entropy runs only in space and not in time. Time is merely a duration of entropy increasing and is entering existence when measured by the observer.

Taking into account the growing interest in microalgae to be used as raw material for biodiesel production, this research is aimed at analyzing the rheological behaviour of microalgae suspensions (Chlorella sp) at different culture times under eight different conditions (temperature, salinity and CO₂, NO₃ and PO₄ levels) in order to estimate the energy demands of each step, with the purpose of optimizing a continuous feed tubular bioreactor construction. For each condition, it was calculated the biomass and oil yields, so as to correlate these results with rheological parameters. The suspension results indicated that the microalgae Chlorella sp is a non-Newtonian material with dilatant characteristics; the processing time hardly exerted an influence on the rheograms of the suspension of the microalgae Chlorella sp, except for the simultaneous conditions of low salinity and low CO₂ content; NO₃ and PO₄ contents and the amount of supplements influenced the rheological parameters of the suspension of the microalgae Chlorella sp, when in low concentration of CO₂ and low salinity levels.

As urban populations continue to grow, efficient traffic management becomes paramount in reducing congestion, enhancing air quality, and improving overall quality of life. This study addresses the critical issue of intersection efficiency through the implementation of smart green time allocation strategies at a signalized intersection equipped with two LiDAR sensors. This research aims to investigate optimal green time allocations provided by two LiDAR sensors and analyze the LiDAR results by microsimulation in AIMSUN. The research first introduces the concept of LiDAR-equipped signalized intersections and their potential to enhance traffic control precision. Two LiDAR sensors are strategically placed at the intersection of Marlboro Pike and Brooks Dr. in Coral Hills, MD, USA to capture real-time data on vehicle and pedestrian movements. The data are then processed to generate accurate and dynamic traffic profiles, ensuring the responsiveness of the green time allocation system to varying traffic conditions.The heart of this study lies in the integration of AIMSUN microsimulation with LiDAR data. Through meticulous modeling and simulation, the research explores the optimal green allocation at morning, mid-day, and afternoon peak hours’ scenarios to comprehensively assess the impact of LiDAR-enabled dynamic signal control. The findings demonstrate that smart green time allocation, informed by real-time LiDAR data and implemented through AIMSUN microsimulation, significantly enhances intersection efficiency. By adapting signal timings to real-time traffic demands, congestion, travel times, and emissions are reduced. Furthermore, this research highlighted that the optimal green time allocation in morning, mid-day, and afternoon peak hour intervals can improve the delay time by 55.3%, 59.7%, and 55.6%, respectively.In conclusion, this paper sheds light on the potential of LiDAR technology to transform intersection management. Through a case study involving two LiDAR sensors and AIMSUN microsimulation, it reveals the tangible benefits of dynamic signal control in enhancing intersection efficiency and creating more sustainable urban environments. These findings are pivotal in advancing the discourse on modern urban traffic management and promoting data-driven solutions for the challenges of today's cities.

Traffic signal control plays a key role in managing urban traffic flow, enhancing safety, and minimizing congestion and conflicts. Effective green time allocation is a critical element of this control process. This research explores the utilization of LiDAR sensor technology in the optimization of green time allocation for one phase of a traffic signal at a signalized intersection. LiDAR sensors provide precise and real-time data on vehicle presence and traffic patterns, enabling a data-driven approach to traffic signal control. The study begins with an analysis of the limitations of traditional traffic signal control strategies, which often rely on fixed-time plans or rudimentary vehicle detection systems. These approaches can lead to suboptimal green time allocation, resulting in inefficient traffic management and increased vehicle delays.The integration of LiDAR sensors provides detailed information on vehicle queues, arrival rates, and vehicle types. The research presents a practical framework for green time allocation optimization, considering factors such as intersection geometry, traffic volumes, and signal coordination. An intelligent control algorithm was developed that uses LiDAR data to determine the optimal green time for a specific phase, thereby reducing unnecessary waiting times and enhancing intersection efficiency. The effectiveness of the proposed LiDAR-based green time allocation strategy is demonstrated through extensive field tests. The results indicate significant improvements in intersection throughput, reduced delays, and enhanced traffic safety. In conclusion, this research highlights the transformative potential of LiDAR sensor technology in traffic signal control, specifically in the context of optimizing green time allocation. The findings support the notion that adaptive and data-driven strategies, when integrated with LiDAR sensors, can contribute to more efficient, sustainable, and safe urban traffic management. This research aims to provide valuable insights for transportation engineers, policymakers, and researchers seeking innovative solutions for modern urban traffic control.

The alteration of natural land cover to impervious surfaces during development increases stormwater runoff. Stormwater Control Measures (SCMs) are used to manage water quantity and enhance water quality by restoring the hydrologic cycle altered by development. Often, SCMs have an outflow pipe to handle overflows or to manage the release of water detained when infiltration is not possible. Traditionally, these are static controls (e.g. a small orifice is used to restrict the volume of outflow), however, these systems can be improved by instituting real-time controls (RTC). RTC improve the functionality of SCMs by dynamically controlling outflows to adjust to environmental conditions. A major impediment to the widespread implementation of RTC is the high cost of installation and operation. This study utilized machine learning methods to develop a forecasting approach for the implementation of low-cost RTC that were implemented on a programmable gate of the outlet structure of a multi-stage basin in southeastern Pennsylvania. The goals were to decrease the peak flow exiting the basin during rain events, increase the volume of water detained, decrease the number of overtopping events, maintain healthy vegetation in the basin, and protect the downstream vegetation from erosion. Multiple popular data science algorithms were evaluated including multiple linear regression and long short-term memory. These algorithms were used with a dataset, which consisted of four years of historical sensor data, collected in 5-minute intervals, to train models to predict water levels to optimize operations. The accuracy of 30 models with three different methods of handling missing values were compared. A long short-term memory model configured with a 30-minute lead time produced the best results. Having an approximate same lag time of 30 minutes for the contributing drainage area of the SCM provided a sufficient RTC functioning period to improve the performance of the outlet structure.

Time series data are significant and are derived from temporal data, which involve real numbers representing values collected regularly over time. Time series have a great impact on many types of data. However, time series have anomalies. We introduce hybrid algorithm named novel matrix profile (NMP) to solve the all-pairs similarity search problem for time series data. The proposed NMP inherits the features from two state-of-the art algorithms: similarity time-series automatic multivariate prediction (STAMP), and short text online microblogging protocol (STOMP). The proposed algorithm caches the output in an easy-to-access fashion for single- and multidimensional data. The proposed NMP algorithm can be used on large data sets and generates approximate solutions of high quality in a reasonable time. The proposed NMP can also handle several data mining tasks. It is implemented on a Python platform. To determine its effectiveness, it is compared with the state-of-the-art matrix profile algorithms i.e., STAMP and STOMP. The results confirm that the proposed NMP provides higher accuracy than the compared algorithms.

The futures market plays a significant role in hedging and speculating by investors. Although various models and instruments are developed for real-time trading, it is difficult to realize profit by processing and trading a vast amount of real-time data. This study proposes a real-time index futures trading strategy that uses the pattern of KOSPI 200 index futures time series data. We construct a pattern matching trading system (PMTS) based on a dynamic time warping algorithm that recognizes patterns of market data movement in the morning and determines the afternoon's clearing strategy. We adopt 13 and 27 representative patterns and conduct simulations with various ranges of parameters to find optimal ones. Our experimental results show that the PMTS provides stable and effective trading strategies with relatively low trading frequencies. Investor communities that have sustained financial markets are able to make more efficient investments by using the PMTS. In this sense, the system developed in this paper is a sustainable investment technique and helps financial markets achieve efficient sustainability.

Markov chain Monte Carlo sampling propagators, including numerical integrators for stochastic dynamics, are central to the calculation of thermodynamic quantities and determination of structure for molecular systems. Efficiency is paramount, and to a great extent, this is determined by the integrated autocorrelation time (IAcT). This quantity varies depending on the observable that is being estimated. It is suggested that it is the maximum of the IAcT over all observables that is the relevant metric. Reviewed here is a method for estimating this quantity. For reversible propagators (which are those that satisfy detailed balance), the maximum IAcT is determined by the spectral gap in the forward transfer operator, but for irreversible propagators, the maximum IAcT can be far less than or greater than what might be inferred from the spectral gap. This is consistent with recent theoretical results (not to mention past practical experience) suggesting that irreversible propagators generally perform better if not much better than reversible ones. Typical irreversible propagators involve a parameter controlling the mix of ballistic and diffusive movement. To gain insight into the effect of the damping parameter for Langevin dynamics, its optimal value is obtained here for a multidimensional quadratic potential energy function.

The exact solutions in the wave form are derived for the time fractional KdV and the time fractional Burgers' equations in conformable fractional derivative sense. The fractional variable change using the fundamental properties of the conformable derivative reduces both equations to some nonlinear ODEs. The predicted solution is assumed to be a finite series form of a function satisfying a particular first-order ODE whose solution contains an exponential function in the denominator. The solutions are represented in the explicit forms and illustrated by some choices of the parameters for various fractional orders of the equations.

The continuous flowing spacetime forms a spacetime group G, one of its fundamental groups is the Poincare group PO(1,3), and the matter and interaction fields are representations of its intrinsic spacetime group. As a kind of quantized space-time unit, space-time group elements generate both space-time manifolds and matter. Matter and fields are aggregates of the quantum space-time within them and determine their type: the Lorentz group SO(1,3) represents a rotating spacetime corresponding to visible matter and the translation group P^1,3 represents a translational spacetime corresponding to dark matter and dark energy. The aggregation mode of space-time degrees of freedom in matter reveals that charge conjugation symmetry is the inverse symmetry of internal time of charged particles, and the external parity breaking of neutrinos is also due to their internal spatial aggregation mode.

The Sine-Gordon expansion method is implemented to construct exact solutions some conformable time fractional equations in Regularized Long Wave(RLW)-class. Compatible wave transform reduces the governing equation to classical ordinary differential equation. The homogeneous balance procedure gives the order of the predicted polynomial-type solution that is inspired from well-known Sine-Gordon equation. The substitution of this solution follows the previous step. Equating the coefficients of the powers of predicted solution leads a system of algebraic equations. The solution of resultant system for coefficients gives the necessary relations among the parameters and the coefficients to be able construct the solutions. Some solutions are simulated for some particular choices of parameters.

Background: Digital health significantly affects healthcare delivery. Moreover, empirical studies on the utilization of telehealth in Dubai are limited. Accordingly, this study examines the utilization of telehealth services in Dubai Health Authority (DHA) facilities and the factors associated with telehealth appointment completion and turnaround time. Methods: This cross-sectional study examines patients who used telehealth services in DHA from 2020 through 2021 using 241,822 records. A binary logistic regression model was constructed to investigate the association between appointment turnaround time as a dependent variable and patient and visit characteristics as independent variables. Results: Of the total scheduled telehealth visits, more than three-quarter (78.55%) were completed. Older patients, non-Emiratis, patients who had their visits in 2020, patients who had video visits, and those who sought family medicine as a specialty had a shorter turn-around time to receive their appointment. Conclusions: This study identifies several characteristics associated with the turn-around time. Moreover, technological improvements focusing on specialties that can readily be addressed through telehealth and further research in this domain will improve service provision and support building an evidence base.

The principal aim of a spectral observer is twofold: the reconstruction of a signal of time via state estimation and the decomposition of such a signal into the frequencies that make it up. A spectral observer can be catalogued as an online algorithm for time-frequency analysis because is a method that can compute on the fly the Fourier transform (FT) of a signal, without having the entire signal available from the start. In this regard, this paper presents a novel spectral observer with an adjustable constant gain for reconstructing a given signal by means of the recursive identification of the coefficients of a Fourier series. The reconstruction or estimation of a signal in the context of this work means to find the coefficients of a linear combination of sines a cosines that fits a signal such that it can be reproduced. The design procedure of the spectral observer is presented along with the following applications: (1) the reconstruction of a simple periodical signal, (2) the approximation of both a square and a triangular signal, (3) the edge detection in signals by using the Fourier coefficients, (4) the fitting of the historical Bitcoin market data from 2014-12-01 to 2018-01-08 and (5) the estimation of a input force acting upon a Duffing oscillator. To round out this paper, we present a detailed discussion about the results of the applications as well as a comparative analysis of the proposed spectral observer vis-à-vis the Short Time Fourier Transform (STFT), which is a well-known method for time-frequency analysis.

Thrombin (factor IIa) and factor Xa (FXa) are key enzymes at the junction of the intrinsic and extrinsic coagulation pathways and are the most attractive pharmacological targets for the development of novel anticoagulants. Twenty non-amidino N²-thiophencarbonyl- and N²-tosyl anthranilamides 1-20 and six amidino N²-thiophencarbonyl- and N²-tosylanthranilamides 21-26 were synthesized and evaluated prothrombin time (PT) and activated partial thromboplastin time (aPTT) using human plasma at concentration 30 μg/mL in vitro. From these results, compounds 5, 9, and 21-23 were selected to study the further antithrombotic activity. The anticoagulant properties of 5, 9, and 21-23 significantly exhibited a concentration-dependent prolongation of in vitro PT and aPTT, in vivo bleeding time, and ex vivo clotting time. These compounds concentration-dependently inhibited the activities of thrombin and FXa and inhibited the generation of thrombin and FXa in human endothelial cells. In addition, data showed that 5, 9, and 21-23 significantly inhibited thrombin catalyzed fibrin polymerization and mouse platelet aggregation and inhibited platelet aggregation induced U46619 in vitro and ex vivo. N-(3'-Amidinophenyl)-2-((thiophen-2''-yl)carbonyl amino)benzamide (21) was most active.

The exact solutions of some conformable time fractional PDEs are presented explicitly. The modified Kudryashov method is applied to construct the solutions to the conformable time fractional Regularized Long Wave-Burgers (RLW-Burgers, potential Korteweg-de Vries (KdV) and clannish random walker's parabolic (CRWP) equations. Initially, the predicted solution in the finite series of a rational form of an exponential function is substituted to the ODE generated from the conformable time fractional PDE by using wave transformation. The coefficients used in the finite series are determined by solving the algebraic system derived from the coefficients of the powers of the predicted solution.

The 3GPP release 16 integrates TSN functionality into 5G and standardizes various options for TSN time synchronization over 5G such as transparent mode and bridge mode. The time domains for the TSN network and the 5G network are kept separate with an option to synchronize either of the networks to the other. The TSN time synchronization over 5G is possible either by using the IEEE 1588 generalized Precision Time Protocol (gPTP) based on UDP/IP multicast or via IEEE 802.1AS based on Ethernet PDUs. The INET and Simu5G simulation frameworks, which are both based on the OMNeT++ discrete event simulator, are widely used for simulating TSN and 5G networks. The INET framework comprises the 802.1AS based time synchronization mechanism and Simu5G provides the 5G user plane carrying IP PDUs. We modified the 802.1AS based synchronization model of INET so that it works over UDP/IP. With that it is possible to synchronize TSN slaves (connected to 5G UEs), across a 5G network, with a TSN master clock, present within a TSN network, that is connected to the 5G core network. Our simulation results show that 500 microseconds synchronization accuracy can be achieved with the corrected asymmetric propagation delay of uplink and downlink between the gNodeB (gNB) and the User Equipment (UE). Futhermore, the synchronization accuracy can be improved if the delay difference between uplink and downlink is known.

Introduction: The purpose of this study was to determine the normative values of muscles’ contractile properties, lateral symmetry, and the impact of aging on muscle contractility in gymnastics. Materials and Methods: A survey of 81 athletes from different disciplines was undertaken: MAG (n = 26), WAG (n = 28), and RG (n = 27). The athletes’ average age was 15.41 ± 5.03 years. We try to establish the normative values for contraction time (muscle pairs) in gymnastics for Slovenian athletes for ten skeletal muscles. Results: Athletes’ age affects contractility in a negative way. Differences between the duration of contractility and age were found in all disciplines: m. BF (r = 0.48, p < 0.001), m. TB (r = 0.37, p < 0.013), m. ES (r = 0.17, p < 0.025), m. VL (r = 0.36, p < 0.00) and m. VM (r = 0.40, p < 0.000) at a statistical significance of p < 0.05. Conclusions: A comparison between the left and right sides shows little asymmetry in WAG and that the occurrence of injuries is in the middle range. In RG we see a bigger deviation, which could trigger the emergence of pain or injury in m. BF (13%) and m. GL (14.5%), but in MAG the deviation is greater in m. BB (12%), m. BF (11%) and m. GM (13%).

The anomaly detection task is very important in computer science. And there are a lot of anomaly detection methods. Different from some thresholding methods, some unsupervised methods could make us get more accurate and faster result, which is the object of the project. In this paper, I tried to use EWMA and some other methods in two datasets: Webank time consuming indicators dataset and AIOps Challenge dataset. The paper consists nine parts: background of the project, related work, description of algorithms, implementation details, experimental setup and data sets used, experimental results and discussion, future directions, reference and meeting notes.

There is a long standing ‘two times problem’ in that a satisfactory reconciliation between the time of physics and that of psychology has not been realized. A partial solution to the past/present/future phenomenon has been successfully given by the Hartle information gathering and processing system (IGUS) view. That model IGUS robot is enhanced here for the entire ‘two times problem’ to deal with not only the temporal experiences of the flow of time but also those of manifest time. A dualistic robot is proposed which has a veridical system of temporal experiences that are compatible with various spacetime cosmologies. It also has an illusory system of corresponding temporal experiences. This dualistic IGUS robot was made possible by discovering temporal experience within the brain that correspond to those of physics. The dualistic theory suggests that the veridical system, as a result of evolution, begets the illusory system to enhance behavioral adaptation. Thus, there is just one fundamental physical time which the brain does, indeed, possess and then enhances with illusory counterparts. Therefore, there should no longer be a need to reify illusory temporal experiences as modern spacetime cosmologies tend to do. Physical time already resides within human time.

Divergences have become a very useful tool for measuring similarity (or dissimilarity) between probability distributions. Depending on the field of application a more appropriate measure may be necessary. In this paper we introduce a family of divergences we call gamma-divergences. They are based on the convexity property of the functions that generate them. We demonstrate that these divergences verify all the usually required properties, and we extend them to weighted probability distribution. We investigate their properties in the context of kernel theory. Finally, we apply our findings to the analysis of simulated and real time series.

We propose a geographical time-space model extending time-space relief cartography introduced by Mathis and L’Hostis [,,,]. The novelty of the model resides in the use of cones to describe the terrestrial surface instead of graph faces, and in the use of curves instead of broken segments for edges. The approach lies a the intersection of two domains involving graphic representation: cartography, and three dimensional computer graphics. We implement the model on the Chinese space. The Chinese geographical time-space of the reference year 2006 is produced by the combination and the confrontation of the fast air transport system and of the 7.5 times slower road transport system. Slower, short range flights are represented as curved lines above the earth surface with longer length than the geodesic, in order to account for a slower speed. The very steep slope of cones expresses the relative difficulty of crossing terrestrial time-space, as well as the comparably extreme efficiency of long-range flights for moving between cities. Finally, the whole image proposes a coherent representation of the geographical time-space where fast city to city transport is combined with slow terrestrial systems that allow to reach any location.

In this paper, we present a relapse based demonstrating way to deal with investigate various arrangement MTC information. A commonplace use of this displaying approach incorporates three stages: first, define a model that approximates the connection between quality articulation and trial factors, with boundaries consolidated to address the exploration premium; second, utilize least-squares and assessing condition methods to gauge boundaries and their relating standard blunders; third, register test insights, P-qualities and NFD as proportions of factual criticalness. The benefits of this methodology are as per the following. To begin with, it tends to the exploration interest in a particular, precise way, and maximally uses all the information and other important data. Second, it represents both orderly and irregular varieties related with the information, and the consequences of such examination give not just quality explicit data applicable to the exploration objective, yet additionally its dependability, in this way helping agents to settle on better choices for subsequent investigations. Third, this methodology is truly adaptable, and can undoubtedly be stretched out to different sorts of MTC considers or other microarray explores by detailing various models dependent on the test plan of the investigations.

Nowadays, security is a top priority. In fact, biometrics uses cutting-edge technologies to identify terrorists and criminals. But the practice of distinguishing humans based on intrinsic physical or behavior traits goes back thousands of years. With the widespread use of computers in the late 20th century, new possibilities for digital biometrics emerged and new technologies were generously used. Among these, we remember high resolution security video cameras and drones. So, the aim of the present project is to study and explain the features of these technologies, especially the ones of the the Phantom 4 Pro+ aircraft and analyze its operating methods in order to identify human faces during live streaming of videos. For this purpose, it will be used Paul Viola and Michael Jones’ face detection algorithm, which includes Haar features and cascade classifiers to identify faces, eyes and ears of an individual.

The influence of the film thickness and the substrate’s refractive index on the surface mode at the superstrate is an important study step that may help clearing some of the misunderstandings surrounding their propagation mechanism. A single sub-wavelength slit perforating a thin metallic film is among the simplest nanostructure capable of launching Surface Plasmon Polaritons on its surrounding surface when excited by an incident field. Here, the impact of the substrate and the film thickness on surface waves is investigated. When the thickness of the film is comparable to its skin depth, SPP waves from the substrate penetrate the film and emerge from the superstrate, creating a superposition of two SPP waves, that leads to a beat interference envelope with well-defined loci which are the function of both the drive frequency and the dielectric constant of the substrate/superstrate. As the film thickness is reduced to the SPP’s penetration depth, surface waves from optically denser dielectric/metal interface would dominate, leading to volume plasmons that propagate inside the film at optical frequencies. Interference of periodic volume charge density with the incident field over the film creates charge bundles that are periodic in space and time.

Differences between the quantum mechanical and relativistic concepts of time observed in GPS satellites are accounted for by applying the equivalence principle to the transitioning electron of an atomic clock. It allows a differential equation of motion to be derived for the electron in the Minkowski space between electron shells. Using Hamilton’s principle we transform the differential equation relativistically into an integral equation of motion, the time integral of a Lagrangian. This newly derived equation accounts for the abstract mathematics of the more familiar non-relativistic model by means of a physical interpretation. Abstract rotations in Hilbert space are replaced by the rotations of real particle field geometries in Minkowski space. Because the properties of energy are universal the same equations are then used to describe the field geometry of galaxies despite vast differences in lifetime. They reveal a symmetry between the electromagnetic fields of atoms and the gravitational fields of galaxies due to similarities in the exchange of energy by radial and transverse fields. Our analysis reveals that the conjugate variables energy and time permit differences between atomic and galactic structure to be compared in a more intuitive way than by means of the differential equations of motion which use the conjugate variables position and momentum.

Industrial data scarcity is one of the largest factors holding back the widespread use of machine learning in manufacturing. To overcome this problem, the concept of transfer learning was developed and it achieved high attention in recent industrial research. Our paper focuses on the problem of time series segmentation and presents the first in-depth research about transfer learning for deep-learning based time series segmentation on the example of industrial end-of-line pump testing. In particularly, we investigate if the performance of deep learning models can be increased by pretraining the network with data from other domains. Three different scenarios are analyzed: source and target data being closely related, source and target data being distantly related, and source and target data being non-related. The results demonstrate that transfer learning can enhance the performance of time series segmentation models in respect to accuracy and training speed. The benefit is most clearly seen in scenarios where source and training data are closely related and the number of target training data samples is lowest. However, in the scenario of non-related datasets, cases of negative Transfer Learning were observed as well. Thus, the research emphasizes the potential, but also the challenges of industrial Transfer Learning.