This paper considers a two-way relay network, where two source nodes exchange messages through several relays in the presence of an eavesdropper, and the channel state information (CSI) of the eavesdropper is imperfectly known. The amplify-and-forward relay protocol is used and the relay beamforming weights are designed. The model is built up to minimize the total relay transmit power while guaranteeing the quality of service at users and preventing the eavesdropper from decoding the signals. Due to the imperfect CSI, a semi-infinite programming problem is obtained. An algorithm is proposed to solve the problem, and the iterative points are updated through the linesearch technique, where the feasibility are preserved during iterations. The optimality property is analyzed. The obtained subproblems are quadratic constrained quadratic programming problems, either with less than $4$ constraints or with only one variable, which are solved optimally. Simulation results demonstrate the importance of the proposed model, and imply that the proposed algorithm is efficient and converges very fast, where more than 85% of the problems are solved optimally.

This paper studies a multihop amplify-and-forward (AF) simultaneous wireless information and power transfer (SWIPT) relaying system. Each relaying node harvests energy using power splitting (PS) scheme from a part of its received signal to amplify and forward the rest the received signal to the next relay. Based on this system model and signal flow, we derived and solved the convex energy minimization problem with optimal PS ratio. The influence of processing cost was then investigated for the AF-SWIPT system with the decode-and-forward SWIPT as benchmark, where AF-SWIPT was found to be superior.

This paper considers a hybrid relay network consisting of the source, the amplify-and-forward (AF) relay, the decode-and-forward (DF) relay, and the destination. We propose the optimal power allocation schemes between two different relays which maximize the achievable rate under a sum relay power constraint for given channel gains and transmit power from source. By solving the optimization problem to maximize the achievable rate for each relay network, the transmit power values in closed-form are derived. When the channel gains are the same, the optimal power allocation scheme for AF-DF relay network proves that a more power should be allocated at the first relay to maximize the achievable rate. In case of the DF-AF relay network, we derive the optimal power allocation scheme for the possible four cases. Under the same SNR condition at the first hop, we show that the achievable rate of AF-DF relay network is greater than that of DF-AF relay network when the channel gain between two relays is higher than that between the second relay and destination. Simulation results show that the proposed power allocation schemes provide a higher achievable rate than the equal power allocation schemes.

Wireless Powered Communication Networks (WPCN), which has attracted much attention of researchers, also been recently recommended in 5^th generation (5G) wireless networks. With the help of the WPCN, the reliability and battery life of wireless low-power devices can be improved. In this paper, we investigate throughput and ergodic capacity in WPCN-assisted amplify-and-forward (AF) relaying system, considering two transmission modes including delay-tolerant and delay-limited. As important achievement, we propose symmetric energy harvesting protocol, namely time power switching relaying (TPSR) in order to find maximal throughput. In particular, both time switching and power switching coefficients in this schemes are considered. Unlike most of the previous works, we further focus on impact of outdated channel state information (CSI) in this WPCN. In order to evaluate information processing efficiency, the performance can be substantially improved by optimally harvesting time and power coefficients of the received signal at relay node for energy and information extraction, and by deploying several scenarios. By deploying Monte Carlo simulation, it is confirmed that the system performance is more sensitive to CSI estimation error, noise variance, signal-to-noise ratio (SNR) and resulting in other reasonable computations of TPSR need be deployed to obtain QoS requirement.

Enabling D2D communication in the mm-Wave band has many obstacles which must be mitigated. The primary concern is the introduction of interference from various sources. Thus, we focused our work on the performance of decode and forward (DF) relay assisted D2D communication in the mm-Wave band for increasing the coverage probability and energy efficiency (EE). Three modes are proposed for D2D communication to prevail. Bit-wise binary XOR operation is executed at the relay node which increases the security feature. Radius of coverage expression is derived which indicates the switching of the modes. The diffused incoherent scattering power is also considered as a part of power consumption. Furthermore, a unique relay selection scheme, Dynamic relay selection (DRS) method is proposed to select the optimal relay for information exchange. Comparison of the proposed DF relay scheme with amplify and forward (DF) scheme is also shown. Finally, simulation results prove the efficacy of the proposed work.

To solve the problem of energy constraint and spectrum scarcity for cognitive radio wireless sensor networks (CR-WSNs), an underlay decode-and-forward relaying scheme is considered, where the energy constrained secondary source and relay nodes are capable of harvesting energy from a multi-antenna power beacon (PB) and using that harvested energy to forward the source information to the destination. Based on the time switching receiver architecture, three relaying protocols, namely, hybrid partial relay selection (H-PRS), conventional opportunistic relay selection (C-ORS), and best opportunistic relay selection (B-ORS) protocols are considered to enhance the end-to-end performance under the joint impact of maximal interference constraint and transceiver hardware impairments. For performance evaluation and comparison, we derive exact and asymptotic closed-form expressions of outage probability (OP) and throughput (TP) to provide significant insights into the impact of our proposed protocols on the system performance over Rayleigh fading channel. Finally, simulation results validate the theoretical results.

This study's main target was to analyze and design rectangular edges supported two ways solid slabs by using ES EN 1992-1-1:2015. Slab design is often carried out either manually or with the use of design and analytic software. The researcher sees that some software cannot accept some countries' standard codes. For example, currently in Ethiopia analysis and design of two-way solid slab is done using readily available Excel sheet template. But working with this might have many problems, firstly the structure that is already analyzed by SAP or SAFE or any other international software application that uses international codes but which cannot design structure using ES EN 1992; for instant euro codes and designed by excel sheet can create failure and uneconomical analysis and design result. In this paper, the slab is designed and analyzed based on the chosen concrete grade, chosen reinforcement bar diameter, chosen steel grade for design and analysis of slabs calculations like load, moment, shear, and deflection checking using the moment coefficient method for analysis and design and Microsoft Visual Basic 2010 for coding. All input values are given by the International Standard units and are also used to represent output values. Using manual calculations delays time and mostly the result is not correct. But using this Computer program can increase computation accuracy and save time. The procedure the researcher followed is, first the manual calculation has been done and then SADSE2021 has been done. The result is that both are 99.9% identical, and the disadvantage of this method is that it cannot be used to determine the detailed drawing.

Underwater Wireless Sensor Networks (UWSN) enables various oceanic applications which require effective packet transmission. In this case, sparse node distribution, dynamic network topology and inappropriate selection of relay nodes cause void holes. Addressing this problem, we present a Relay based Void Hole Prevention and Repair protocol (ReVOHPR) by multiple Autonomous Underwater Vehicles (AUV) for UWSN. ReVOHPR efficiently identifies and avoids void holes and trap relay nodes to avoid it. ReVOHPR adopts the following operations as Ocean Depth (levels) based Equal Cluster Formation, Dynamic Sleep Scheduling, Virtual Graph based Routing, and Relay Assisted Void Hole Repair. For energy efficient cluster forming, Entropy based Eligibility Ranking (E2R) is presented which elects stable cluster heads (CHs). Then, dynamic sleep scheduling is implemented Dynamic Kernel Kalman Filter (DK2F) algorithm in which Sleep and Active modes based on the nodes current status. Inter Cluster Routing is performed by maximum matching nodes which selects by Dual criteria and also data transmitted to AUV. Finally, void holes are detected and repair by Bi-Criteria Mayfly Optimization (BiCMO) algorithm. The BiCMO focuses on reducing the number of holes, data packet loss and maximizes Quality of Service (QoS) and energy efficiency of the networks. This protocol is timely deal with node failures in packet transmission via multi-hop routing. Simulation is implemented by NS3 (AquaSim module) simulator that evaluates the performance in network simulation for following metrics as average energy consumption, delay, packet delivery rate and throughput.

CO2 has characteristic properties and reactions at converter smelting temperature, and the chemical reaction between CO2 and elements such as C and Si in the molten pool has bubble proliferation and cooling effects, which can effectively improve the kinetic and thermodynamic conditions of converter smelting. Here, an experimental study and industrial test on the application of CO2 in converter smelting were carried out. The smelting effects of Mode-1 and Mode-2 with total CO₂ injection amounts of 229 Nm³ and 196 Nm³, respectively, were compared, and the changes in molten steel and slag compositions, dust removal, and gas are analyzed. The test results show that converter top and bottom blowing CO₂ technology (COMI-B)technology had significant metallurgical advantages over the N-Mode; the dephosphorization rate increased by 4.2%, slag (FeO) content was reduced by 2.04%, end point nitrogen content of molten steel was reduced by 20%, gas recovery increased by 8.29 Nm³/t, and soot production reduced by 14.7%. The results of the study provide reference for the application of COMI-B technology in converters in the iron and steel industry and develop a new path for resource utilization of CO₂.

This paper presents a study on optimization of Overcurrent relay (OCR) coordination protection scheme for Sustainable Standalone Hydrokinetic Renewable Energy (SHRE) distribution network at Batang Rajang river, located at Kapit Sarawak, Malaysia by turning river stream into power generation source. The purpose of the project is to develop rural electrification system for native long houses along the river. The research study is tested on a DigSILENT develop model of the SHRE distribution network and in accordance with all respectively unique parameters and relevant standards. Since this is a new standalone distribution system, an efficient and properly coordinated overcurrent protection system must be provided. Improper and miscoordination among OCRs result in maloperation of the protection system that can lead to false tripping and an unnecessary outage and power system instability. Thus, the objective of this work is to employ Genetic Algorithm (GA) technique in Matlab/Simulink for optimal overcurrent coordination and settings among all OCRs in the proposed distribution network in order to improve the speed of OCR tripping operation. The GA is used because the project is fast track and requiring the simplest method available. In this strategy, time dial setting (TDS) is optimized by using plug setting multiplier (PSM) as the constraint. The obtained results show a significant improvement of the relay operating time of 36.01% faster than that of conventional numerical technique during fault occurrence. Thus, an efficient and reliable overcurrent protection scheme has been achieved for the SHRE distribution network.

The four-way reversing valve is a key component determining whether a heat pump air conditioning system can work. Studying the four-way reversing valve is of great significance for improving the performance of the heat pump air conditioning system. In this paper, the control equation of the sliding block movement process is constructed to simulate the reversing process of the four-way reversing valve in fluid mechanics, and a detailed study is carried out from the sliding block speed, sliding block acceleration, sliding block force, refrigerant leakage, and other aspects. Research has shown that optimizing the structure of the slider can greatly improve the working performance of the four-way reversing valve. Increasing the height of the slider not only improves the pressure relief ability of the four-way reversing valve and prevents the slider from being damaged by high-pressure gas impact, but also reduces the leakage of refrigerant during the directional process; When reducing the length of the slider, although it will improve the pressure relief capacity of the four-way reversing valve, it also increases the amount of refrigerant leakage. The research results provide a theoretical basis and improvement direction for designers to improve the performance of four-way reversing valves.

The growing expansion of the economy and population has resulted in an increased inclination towards the utilization of groundwater resources. Conducting a geophysical survey is a widely employed method for subsurface mapping and the detection of groundwater. A geophysical study was conducted in Nanshan township, Huarong County, located in the Hunan province of the South-Central region of China. The investigation involved the utilization of a 2D Electrical Resistivity Imaging technique employing forward and inverse pole-dipole electrode array. A total of six survey lines were established, each with an electrode distance from the nearest measuring point to exceeding 800 m. The maximum current electrode separation was utilized in this setup. The spacing between the electrical resistivity sounding points was established at regular intervals. The findings from the exploration indicate the existence of multiple faults within the surveyed region. The study additionally identified two regions of structural failure, which occurred due to the convergence of faults oriented in different directions. This convergence led to the fracturing of rocks, an increase in water content, and a decrease in resistivity. The findings from the exploration were utilized in the formulation of five verification target boreholes. The results of this study offer significant insights that can inform future investigations into groundwater exploration endeavors within the region.

Delay Tolerant Networks (DTNs) are intermittently connected networks, where there is no guaranteed end-to-end connectivity between the source and destination. The link between the pair of nodes in the DTNs environments is frequently disrupted, due to the fast mobility of nodes, dissemination nature, and power outages. Due to the absence of contemporaneous paths between the nodes, the opportunities for message forwarding in DTNs usually are limited. To obtain high data delivery, the DTNs use innovation of the Store-Carry and Forward (SCF) technique which allows data transmission to successfully proceed despite the absence of continuous end-to-end paths. However, the SCF approach arises various issues such as buffer congestion and message drop which are caused due to growing number of carried messages in restricted network resources. Therefore, buffer management techniques are required to manage the buffer capacity of the nodes by deciding how to effectively drop the messages and how to schedule the messages in the node’s buffer in a perfect way. This paper evaluates the performance of six buffer management techniques, namely First-In-FirstOut, Last In First Out, Drop Largest, Drop Youngest, Evict Shortest Lifetime First and Evict Most Forwarded First, with MaxProp and Spray and Wait routing protocols under variable message’s Time-To-Live values (60 to 300 minutes with step-change 60 minutes). In addition, this study uses an Opportunistic Network Environment (ONE) simulator that is utilized for evaluating the performance of the dropping policies techniques, where it is considering five performance metrics (delivery ratio, overhead ratio, average latency, hop count, and message drop). The evaluation results of each buffer management policy are explained by these metrics briefly.

Microwave radiation diagnosis technology can detect thermal changes in skin tissue earlier than anatomical changes, but its detection accuracy is limited by non-target radiation interference in the measurement environment, additional measurement errors of system units, and energy scattering and transmission between skin tissues. This paper aims to address the scientific challenges of analyzing the forward and inversion modelling detection mechanism of layered accurate temperature measurement of human skin tissue based on multi-band. The study focuses on the construction of a pencil beam antenna optimization system, the optimization strategy of high-sensitivity correlated radiometer architecture, and the high-precision multi-band forward and inversion modelling detection algorithm. The key technologies include: (1) A new method of integrated modeling and multi-index optimization of antenna with high directivity and small aperture is proposed, and a priori knowledge-guided neural network of pencil beam distribution is constructed to realize the inversion model of antenna structural parameters; (2) The influence mechanism of high sensitivity correlated radiometer architecture error is analyzed, and a periodic phase shift error correction algorithm based on uniform polar circle is designed; (3) Combining deep learning theory and hyperparameter optimization framework, an iterative model is established, and the objective function modified by the penalty factor is defined to realize a new detection method combining forward and inversion. This paper presents a theoretical foundation for the industrialization of microwave radiation diagnostic technology.

The lexical analysis of seminal policy-to-diplomacy documents from the socio-environmental discourse of the last fifty year agendas allowed examining the evolution of five themes: resources/waste, pollution, social and economic development, justice, and health. Contextual affinities were strongest between resources, pollution, and health and are linked to societal trends and pressures. On those grounds, the central role of resource stewardship according to nature’s physical limits is highlighted, and dedicated concepts, analytical frameworks, and methodologies with different degrees of sustainability are analyzed. To reframe the identified social and economic problems, the work proposes criteria and choices that (1) allow to compare the dynamics of socioecological states across the planet, (2) help matching the pace of socioecological change by addressing path dependencies through participation and engagement of communities, and (3) enable stakeholders to make trade-offs and take decisions in specific social, economic, political, and cultural contexts. The prioritization of resource justice and responsibility becomes a societal project : from Wellfare State to commonfare communities.

The reliability of concrete cable-stayed bridge structure is time variant. This is due to strength deterioration and time-variant mechanical and environmental loadings. Demands for keeping concrete cable-stayed bridge structure in functional and reliable states require maintenance interventions. Limited financial resources require optimal maintenance strategies. These strategies have to consider the effects of uncertainties not only on the structural reliability deterioration but also on the maintenance interventions. By analyzing variation of concrete cable-stayed concrete cable-stayed bridge liabilities and benefit expectation through different maintenance programs, on the condition of satisfying the concrete cable-stayed bridge performance, with the maximum expected benefit as the target to discuss repair and reinforcement strategies for the concrete cable-stayed bridges in service. The method takes into account the present performance and future expected benefit, optimizing the performance of the concrete cable-stayed bridge and the expected benefit through determination policies of concrete cable-stayed concrete cable-stayed bridge maintenance program. The proposed method also includes an advanced cost model which takes into account the interaction between costs of maintenance interventions and their effect on reliability. Examples are presented demonstrating the application of the proposed method to a stock of existing deteriorating concrete cable-stayed bridges under various maintenance scenarios.

Infection with the porcine reproductive and respiratory syndrome virus type 1 (PRRSV-1) has serious economic consequences for the pig industry. Swine practitioners and other agricultural advisors often describe an increase in antibiotic use when PRRSV-1 is circulating. Our objective was to assess the impact of PRRSV-1 stabilization programmes on reducing antibiotic use. The study was carried out on 19 French farrow-to-finish farms that successfully implemented a PRRSV-1 stabilization protocol between 2007 and 2019. For each farm, antibiotic consumption (expressed in mg/PCU and ALEA) were compared one year before (P1) and one year after (P2) the implementation of such a protocol and the change between P1 and P2 were calculated in percentages. Data were then analysed by level of consumption. Antibiotic use decreased significantly between P1 and P2 if expressed in mg/PCU and showed a decreased tendency in terms of exposure (ALEA). Concerning the change from P1 to P2, our results showed that the higher consumption levels in P1, the greater antibiotic reduction in P2. This study highlights the ability of a stabilization protocol against PRRSV-1 to reduce antibiotic use, especially on farms that have high consumption. These hopeful results show that further investigations about the relationship between PRRSV-1 and antibiotic usage could be beneficial.

For each non-prime odd number as F=pq , if we consider m/n as an approximation for q/p and choose k=mn , then by proving some lemmas and theorems, we can compute the values of m and n. Finally, by using Fermat’s factorization method for F and 4kF as difference of two non-consecutive natural numbers, we should be able to find the values of p and q. Then we introduce two new and powerful sieves for separating composite numbers from prime numbers.

This study provides a comprehensive assessment of Derawan Island's coral reefs over two decades (2003, 2011, and 2021) from a machine learning classification perspective. Employing non-parametric algorithms like Random Forest (RF), Support Vector Machine (SVM), and Classification and Regression Tree (CART), our analysis primarily focused on spatial and temporal changes in coral habitats. RF emerged as the most accurate method, demonstrating an accuracy of 71.43% with Landsat 9, 73.68% with Sentinel 2, and 78.28% with Multispectral Aerial Photos. We found that the accuracy of our classification results was significantly influenced by the geographic resolution, as well as the quality of field and satellite/aerial image data. Through spatial clustering, the coral habitats exhibited an Nearest Neighbor Index (NNI) value of 0.8727, indicating specific patterns of distribution. The analysis revealed a decrease in coral reef extent from 2003 to 2011, shrinking to 16 hectares with varying densities, followed by a slight area increase but with more heterogeneous densities between 2011 and 2021. This study not only highlights the dynamic nature of coral reef habitats over two decades but also underscores the critical role of machine learning in environmental monitoring and conservation efforts.

Understanding and addressing dehumanization in healthcare is crucial due to its pro-found impact on patient care, ethical implications on patient dignity and autonomy, and its potential to affect the psychological well-being of healthcare professionals. The primary aim of this study was to establish reliable and valid instruments measuring two different types of dehumanization, namely animalistic dehumanization (i.e., stripping one of their uniquely human characteristics) and mechanistic dehumanization (i.e., stripping one of their human nature characteristics) among healthcare professionals. In a cross-sectional validation study among healthcare professionals, we tested measures of both animalistic and mechanistic dehumanization, focusing on dehumanization of patients (hetero-dehumanization) and oneself (self-dehumanization), respectively. All measures were developed and validated based on a concept analysis, a literature review, and an appraisal of pre-existing scales. The research was conducted among 400 nurses and medical doctors employed in Greek public hospitals. Coefficient Validity Ratio re-sults showed that 100% of items were acceptable for both measures. The newly estab-lished and validated hetero-dehumanization scale encompassed two-factors (factor 1: animalistic dehumanization, factor 2: mechanistic dehumanization, Cronbach’s alpha was equal to 0.86 for each measure). The self-dehumanization scale was a mono-factorial measure mechanistic dehumanization (Cronbach’s alpha = 0.97). Two validated measures of (self and hetero-) animalistic and mechanistic dehumanization measures were developed for the assessment of dehumanization among health profes-sionals, which will form the basis for future research in this important scientific field.

Electromagnetic (EM) waves, used for purposes such as geophysical characterization, impact properties to be measured. This paper describes the effects of radio frequency (RF) waves on the hydraulic conductivity of glass beads and natural sand. A series of tests were conducted using a customized, rigid-wall, cylindrical permeameter inside a resonant cavity made of Plexiglas covered with electrically conductive transparent films. Constant head ASTM-D2434 [1] tests were performed to measure the samples’ hydraulic conductivity. RF stimulation was performed using a magnetically coupled loop antenna at a constant frequency of 726 MHz and input power levels of 10, 25, 40, and 50 Watts. The hydraulic conductivity of both natural sand and glass-bead samples increased with RF stimulation. Furthermore, measurement of the electric-field component of RF waves was also performed to illustrate the pattern of the electric field as well as evaluate the RF impact on the hydraulic conductivity tests. The electric field was numerically simulated and validated against experimentally measured electric fields. A finite-difference numerical model was developed in MATLAB to analyze the seepage flow, which was then validated against the experimental results. An optimization scheme was then used to develop a governing equation for the RF impact on hydraulic conductivity.

Timely processing of observations from hyper-spectral imagers, such as SEVIRI (Spinning Enhanced Visible and Infrared Imager), largely depends on fast radiative transfer calculations. This paper mostly concerns the development and implementation of a new forward model for SEVIRI to be applied to real time processing of infrared radiances for the physical retrieval of surface temperature and emissivity. The new radiative transfer model improves computational time by a factor of ≈ 7 compared to the previous versions and makes it possible to process SEVIRI data at nearly real time. The new forward model has been applied for the simultaneous retrieval of surface temperature and emissivity in three infrared channels (8.7, 10.8, 12 μm). The inverse scheme relies on a Kalman filter approach, which allows us to exploit a sequential processing of SEVIRI observations. Based on the new forward model, the paper also presents a validation retrieval performed with in situ observations acquired during a field experiment carried out in 2017 at Gobabeb (Namib desert) validation station. Furthermore, a comparison with IASI (Infrared Atmospheric Sounder Interferometer) emissivity retrievals has been performed as well. It has been found that the retrieved emissivities are in good agreement with each other and with in situ observations, i.e. average differences are generally well below 0.01.

Recently, Li et al [1] investigated the nonlinear Langevin equations existence including two fractional orders with infinite-point boundary conditions. It has shown that the outcomes given it does count on the solution form for which it has boundary values. It means that their solution needs more to be in the final step. In current work, we will have discussion about the existence and uniqueness for the same boundary conditions by investigating the closely explicit solution form that has no boundary values. Numerical example is supported to have more vision to compare the between new and previous results. It turns out that our results are superior.

Understanding and addressing dehumanization in healthcare is crucial due to its profound impact on patient care, ethical implications on patient dignity and autonomy, and its potential to affect the psychological well-being of healthcare professionals. The primary aim of this study was to develop reliable and valid instruments measuring two different types of dehumanization, namely animalistic dehumanization (i.e., stripping one of their uniquely human characteristics) and mechanistic dehumanization (i.e., striping one of their human nature characteristics) among healthcare professionals. In a cross-sectional validation study among healthcare professionals, we developed and tested measures of both animalistic and mechanistic dehumanization, focusing on dehumanization of patients (hetero-dehumanization) and oneself (self-dehumanization), respectively. All measures were developed and validated based on a concept analysis, a literature review, and an appraisal of pre-existing scales. The research was conducted among 400 nurses and medical doctors employed in Greek public hospitals. Coefficient Validity Ratio results showed that 100% of items were acceptable for both measures. The newly developed hetero-dehumanization scale encompassed two-factors (factor 1: animalistic dehumanization, factor 2: mechanistic dehumanization, Cronbach’s alpha was equal to 0.86 for each measure). The self-dehumanization scale was a mono-factorial measure mechanistic dehumanization (Cronbach’s alpha = 0.97). Two validated measures of (self and hetero-) animalistic and mechanistic dehumanization measures were developed for the assessment of dehumanization among health professionals, which will form the basis for future research in this important scientific field.

Natural systems of units $\{U_i\}$ need to be overhauled to include the dimensionless coupling constants $\{\upalpha_{U_i}\}$ of the natural forces. Otherwise, they cannot quantify all forces of nature in a unified manner. Thus, each force must furnish a system of units with at least one dimensional and one dimensionless constant. We revisit three natural systems of units (atomic, cosmological, and Planck). The Planck system is easier to rectify, and we do so in this work. The atomic system discounts $\{ G, \upalpha_G \}$, thus it cannot account for gravitation. The cosmological system discounts $\{ \slashed{h}, \upalpha_\slashed{h} \}$, thus it cannot account for quantum physics. Here, the symbols have their usual meanings; in particular, $\upalpha_G$ is the gravitational coupling constant and $\upalpha_\slashed{h}$ is Dirac's fine-structure constant. The speed of light $c$ and the impedance of free space $Z_0$ are resistive properties imposed by the vacuum itself, thus they must be present in all systems of units. The upgraded Planck system with fundamental units $${\rm UPS} \,:=\,\{ c, Z_0, G, \upalpha_G, \slashed{h}, \upalpha_\slashed{h}, \,\dots\,\!\},$$ describes all physical scales in the universe---it is nature's system of units. As such, it reveals a number of properties, most of which have been encountered previously in seemingly disjoint parts of physics, and some of which have been designated as mere coincidences. Based on the UPS results, that relate (sub)atomic scales to the Planck scale and the fine-structure constant to the Higgs field, we can state with confidence that no observed/measured physical properties are coincidental in this universe. Furthermore, we derive from first principles Koide's $K=2/3$ enigmatic constant and additional analogous quark and vector boson constants. These are formal mathematical proofs that justify a posteriori the use of geometric means in deriving the quark/boson mass ladder. This ladder allows us to also calculate the Higgs couplings to the vector bosons and the Weinberg angle in terms of only $K$.

This article reports on the findings of a research project examining how to create a profession that is attractive and fulfilling for new and existing school leaders in two different municipalities in Sweden. The project set out to explore how work environments, career structures, salaries, and working conditions can contribute to attracting, retaining, and motivating school leaders to stay longer in the profession. To realise this objective, the study adopted a qualitative research design. Data was collected by carrying out semi-structured interviews with a sample of five school leaders in two different municipalities to investigate their experiences and views of the profession. The findings demonstrate that school leaders’ working conditions play a more critical role in their decisions to stay or leave the profession than financial compensation. The study also shows an unequal allocation of resources, both in terms of support functions and the limited time available for in-service education.

This paper focuses on improving the tracking accuracy for servo systems and increasing the contouring performance of precision machining. The dynamic friction during precision machining is analyzed using the LuGre model. The dynamic and static parameters in the friction model are efficiently and accurately identified using the improved Drosophila Swarm Algorithm based on cross-mutation. The friction tracking error can be deduced by the friction state space and an expression is derived. To compensate for the tracking error caused by friction, a feedforward compensation control is designed to avoid signal lag in traditional friction controllers. Furthermore, the factors of multi-axis parameter mismatching that impact the machining profile accuracy are analyzed for multi-axis control. An adaptive cross-coupled control-based pre-compensation strategy of contour error is designed to reduce both the tracking error and the contour error. The effectiveness of the proposed method is validated through several experiments, which demonstrate a remarkable improvement in tracking performance and contour accuracy.

The Earth’s synthetic gravitational and density models can be used to validate numerical procedures applied for a global (or large-scale regional) gravimetric forward and inverse modelling. Since the Earth’s lithospheric structure is better constrained by tomographic surveys than a deep mantle, most of existing 3-D density models describe only a lithospheric density structure, while 1-D density models are typically used to describe a deep mantle density structure below the lithosphere-asthenosphere boundary. The accuracy of currently available lithospheric density models is examined in this study. The error analysis is established to assess the accuracy of modelling the sub-lithospheric mantle geoid, while focusing on the largest errors (according to our estimates) that are attributed to lithospheric thickness and lithospheric mantle density uncertainties. Since a forward modelling of the sub-lithospheric mantle geoid comprises also numerical procedures of adding and subtracting gravitational contributions of similar density structures, the error propagation is derived for actual rather than random errors (that are described by the Gauss’ error propagation law). Possible systematic errors then either lessen or sum up after applying particular corrections to a geoidal geometry that are attributed to individual lithospheric density structures (such as sediments) or density interfaces (such as a Moho density contrast). The analysis indicates that errors in modelling of the sub-lithospheric mantle geoid attributed to lithospheric thickness and lithospheric mantle density uncertainties could reach several hundreds of meters, particularly at locations with the largest lithospheric thickness under cratonic formations. This numerical finding is important for a calibration and further development of synthetic density models of which mass equals the Earth’s total mass (excluding the atmosphere). Consequently, the (long-to-medium wavelength) gravitational field generated by a synthetic density model should closely agree with the Earth’s gravitational field.

Controlled deposition of CoCrFeNiMo0.2 high entropy alloy (HEA) micro-particles was achieved using laser induced forward transfer (LIFT). Ultra-short laser pulses, 230 fs of 515 nm wavelength, were tightly focused into ∼ 2.4 μm focal spots on the ∼50 nm thick plasma-sputtered films of CoCrFeNiMo0.2. The HTA films were transferred onto glass substrates by magnetron sputtering in vacuum (10−8 atm) from the thermal spray coated substrates. The absorption coefficient of CoCrFeNiMo0.2 α ≈ 6 × 105 cm−1 was determined at 600 nm wavelength. The real and imaginary parts of refractive index (n + iκ) of HEA were determined from reflectance and transmittance using nano-films.

Within the past decade, the aerospace engineering industry has evolved outside the constraints of using single, large, custom satellites. Due to increased reliability and robustness of commercial off the shelf (COTS) printed circuit board (PCB) components, missions instead have transitioned towards deploying swarms of smaller satellites. This approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites are able to be quickly developed with a more modular design at lowered risk. The Alpha mission at Cornell Space Systems Studio is fabricated in this manner. However, for the purpose of this mission, only one satellite was initially developed. This manuscript will discuss a systems engineering approach to the development of this satellite. As a disclaimer, this manuscript is written from a systems perspective. Therefore it will follow many subsystems from a wide range of functionalities. The research in this manuscript was kept broad with the hope to contribute to the mission as a system, through a range of development phases including validation and verification of existing methods. The two systems that will be primarily focused on are the Attitude Control System (ACS) of the carrier nanosatellite (cubesat), and the RF communications on the ex-creted picosatellites (chipsat). Milestones achieved in chipsat RF include chipsat to chipsat communication, chipsat to SDR ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Achievements on the ACS side included controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper and IMU tuning. These developments matured the technological readiness level (TRL) of our systems in preparation for satellite deployment.

Aqueous dispersions of magnetic nanocomposites have been proposed as draw electrolytes in forward osmosis. One possible approach for the production nanocomposites based on magnetite nanoparticles and sodium polyacrylate, is the synthesis of the magnetic iron oxide by coprecipitation or oxidative precipitation in presence of an excess of the polymer. In this work we explored the effect of the polymer proportion on the nanomaterials produced by these procedures. The materials obtained were compared s with the obtained by the coating of magnetite nanocrystals produced beforehand with the same polymer. The samples were characterized by chemical analysis, photon correlation spectroscopy, thermogravimetry, X-ray diffraction, infrared spectroscopy, transmission electron microscopy and magnetometry. The general trend observed is that part of the polymer is incorporated to the magnetic material during the synthesis heavily modifying its texture, with a drastic reduction of the particle size and magnetic response. The aqueous dispersions of the nanocomposites were highly stable with hydrodynamic size roughly independent on the polymer proportion. Their osmotic pressure proportional to the concentration of the polyelectrolyte, was similar than the generated by the equivalent amount of free polymer in the case of samples generated by oxidative precipitation and smaller in the case of samples generated by coprecipitation. Finally the possibilities of using these materials as draw electrolytes in forward osmosis will be briefly discussed.

A characteristic feature of lightweight constructions is their low thermal mass which causes high internal temperature fluctuations that require high heating and cooling demand throughout the year. Phase Change Materials (PCMs) is effective in providing thermal inertia to low thermal mass buildings. The aim of this paper is to analyse the thermal behaviour of two proposed lightweight buildings designed for homeless people and to investigate the potential benefit achievable through the use of different types of PCM in the temperate climatic conditions of Christchurch, New Zealand. For this purpose, over 300 numerical simulations have been conducted using the simulation software DesignBuilder®. The bulk of the simulations were carried out under the assumption that the whole opaque building envelope is equipped with PCM. The results showed significant energy saving and comfort enhancement through the application of PCMs. Thereby, annual energy saving of over 50 % was reached for some of the PCMs considered. Additionally, the effectiveness of single, PCM-equipped structure components was investigated and substantial benefits between 19 and 27 % annual energy saving were achieved. However, occupant behaviour in terms of ventilation habits, occupancy of zones etc. remains one of the biggest challenges in any simulation work due to insufficient data.

In the present protocol, we determined the presence and concentrations of bisphenol A (BPA) spiked in surface water samples using EEM fluorescence spectroscopy in conjunction with modelling using partial least squares (PLS) and parallel factor (PARAFAC). PARAFAC modelling of the EEM fluorescence data obtained from surface water samples contaminated with BPA unraveled four fluorophores including BPA. The best outcomes for BPA concentration (R2 = 0:996; Standard deviation to prediction error's root mean square ratio (RPD) = 3.41; and a Pearson's r value of 0.998). With these values of R2 and Pearson's r, the PLS model showed a strong correlation between the predicted and measured BPA concentrations. The detection and quantification limits of the methods were 3.512 and 11.708 micro molar (µM), respectively. In conclusion, BPA can be precisely detected and its concentration in surface water predicted using the PARAFAC and PLS models developed in this study and fluorescence EEM data collected from BPA-contaminated water. It is necessary to spatially relate surface water contamination data with other datasets in order to connect drinking water quality issues with health, environmental restoration, and environmental justice concerns.

In this study, we identified the factors that affect the frequency of receiving nonmarket fruit and vegetables (FV). For Survey 1, we conducted a cross-sectional survey using a self-administered questionnaire for men aged 50–74 living in city (A) in Gunma, Japan. Participants were asked questions on FV receiving frequency, FV gardening, social cohesion (4–20 points), and basic characteristics. For Survey 2, a similar survey was conducted for residents aged 20–74 in three areas in city (B) in Gunma, but we included more variables. Ordinal logistic regression models were used for the analysis. In Survey 1, the responses of 243 participants were analyzed. The results showed that the FV receiving frequency was positively associated with non-gardeners and social cohesion. In Survey 2, the responses of 791 participants were analyzed. Vegetable receiving frequency was positively associated with rural and suburban areas, family structure, employment status, and non-farmers. The relationship between receiving frequency and social cohesion was similar to that found in Survey 1. In conclusion, in areas with flourishing FV cultivation, it seems to be easy to obtain FV through the social networks of reception, even for individuals who are not cultivating FV themselves.

This study examines the evolution of the two-factor authentication method and its adaptability to the online education system. Two-factor authentication is a security measure used especially in areas where information such as banking is valuable. Parallel to technological developments, it has developed as much as daily. It aims to take security one step forward because it is composed of two phases. Today, banking, IOT devices, public transport tickets and many other areas are used. Two-factor authentication methods against security attacks in the field of information are also being updated. In recent years, new technologies such as biometric (iris pattern, retinal pattern, etc.) or behavioral biometry (location tracking, walking information, touch speed etc.) were studied. Instead of physically studying somewhere like going to a course in modern society, online trainings become more advantageous. Most of these online trainings are given certificates such as participation certificate, success certificate, etc. The main problem here is whether the person who is being certified is true. In the study conducted in line with these details, there is a proposal for the application of the Mimic Control Method with Sound Intensity (MCMSI) method for on-line training by examining the two-factor authentication techniques up to the day.

A new variant of two-echelon routing problem is investigated, where the truck and the drone are used to cooperatively complete the deliveries of all parcels. The truck not only acts as a tool for parcel delivery, but also serves as a moving depot for the drone. The drone can carry several parcels and take off from the truck, while returning to the truck after completing the delivery. The energy consumption model for the routing process of the drone is analyzed, when it is utilized to deliver multiple parcels. A two-stage route-based modelling approach is proposed to optimize both the truck’s main route and the drone’s adjoint flying routes. A hybrid heuristic integrating nearest neighbor and cost saving strategies is developed to quickly construct a feasible solution. The simulated annealing algorithm is applied to improve the quality of the solution, where a Tabu list is employed to improve the search efficiency. Random instances at different scales are used to test the performance of the proposed algorithm. A case study based on the practical road network in Changsha, China, is presented, through which the sensitivity analysis is conducted with respect to some critical factors.

A human eye has about 120 million rod cells and 6 million cone cells. This huge number of light sensing cells inside a human eye will continuously produce a huge quantity of visual signals which flow into a human brain for daily processing. However, the real-time processing of these visual signals does not cause any fatigue to a human brain. This fact tells us the truth which is to say that human-like vision processes do not rely on complicated formulas to compute depth, displacement, and colors, etc. On the other hand, a human eye is like a PTZ camera. Here, PTZ stands for pan, tilt and zoom. We all know that in computer vision, each set of PTZ parameters (i.e., coefficients of pan, tilt and zoom) requires a dedicated calibration to determine a camera’s projection matrix. Since there is an infinite number of PTZ parameters which could be produced by a human eye, it is unlikely that a human brain stores an infinite number of calibration matrices for each human eye. Therefore, it is an interesting question for us to answer, which is to say whether simpler formulas of computing depth and displacement exist or not. Moreover, these formulas must be calibration friendly (i.e., easy process on the fly or on the go). In this paper, we disclose an important discovery of a new solution to 3D projection in a human-like binocular vision system. The purpose of doing 3D projection in binocular vision is to undertake forward and inverse transformations (or mappings) between coordinates in 2D digital images and coordinates in a 3D analogue scene. The formulas underlying the new solution are accurate, easily computable, easily tunable (i.e., to be calibrated on the fly or on the go) and could be easily implemented by a neural system (i.e., a network of neurons). Experimental results have validated the discovered formulas.

Soils harbor diverse bacteria, and these bacteria play important roles in soil nutrition cycling and carbon storage. Numerous investigations of soil microbiota had been performed, and the core microbiota in different soil or vegetation soil types had been described. However, the complexity of soil environments and relatively limited information of many geographic areas had attracted great attention on comprehensive exploration of soil microbes in enormous types of soil. To reveal the core soil microbiota in Huabei plain, soil samples from metropolis and countryside regions in the Huabei plain were investigated using high-throughput sequencing strategy. The results showed that the most dominant bacteria are Proteobacteria (38.34%), Actinobacteria (20.56%), and Acidobacteria (15.18%). At the genus-level, the most abundant known genera are Gaiella (3.66%), Sphingomonas (3.6%), Acidobacteria Gp6 (2.1%), and Arthrobacter (2%). Moreover, several dominant operational taxanomy units (OTU), such as OTU_3 and OTU_17, were identified to be associated with the soil environment. Microbial distributions of the metropolis samples were different from the countryside samples, which may reflect the environments in the countryside were more diverse than in the metropolis. Microbial diversity and evenness were higher in the metropolis than in the countryside, which might due to the fact that human activity increased the microbial diversity in the metropolis. The soil core microbiota of the Huabei plain were complex, and microbial distributions in the Huabei plain might be mainly affected by the human activity and environmental factors, not by the distance. Our data highlights the soil core microbiota in Huabei Plain, and provides insights for future soil microbiota distribution studies in central China.

In volleyball, the jump serve is a fundamental and crucial skill that is one of the most commonly used serving techniques. This study aimed to examine the kinematic differences between straight line (SL) and diagonal line (DL) in volleyball jump serves by focusing on torso and attack arm joint motions. Three-dimensional coordinate data were captured using a motion capture system (200 Hz) in 14 right-handed male professional volleyball players who performed SL and DL jump serves. This result suggests that the pelvis and torso backward rotation angles during the arm-clocking phase were smaller when performing DL serves. During ball contact, the servers exhibited greater forward rotation angles of the pelvis and torso to control the upper body facing the diagonal direction of the target zone. In addition, lowering the forward tilt angle of the trunk helped the servers maintain body balance in the air and increased their wrist flexion angle, preventing the ball from flying out of bounds when performing DL. These findings highlight the importance of controlling pelvic and torso rotations in the transverse plane when adjusting for different serving lines. These insights can guide volleyball athletes and coaches in refining their serving techniques.

Semi-continuous data are very common in the social science and economics. In this paper, a Bayesian variable selection procedure is developed to assess the influence of exogenous factors including observed and unobserved on the semi-continuous data. Our formulation is based on the two-part latent variable model with polytomous response. We consider two schemes for the penalties of regression coefficients and factor loadings: the Bayesian spike and slab bimodal prior and the Bayesian lasso prior. Within the Bayesian framework, we implement Markov Chains Monte Carlo sampling method to conduct posterior inference. To facilitate posterior sampling, we recast the logistic model in part one as the norm-like mixture model. Gibbs sampler is designed to draw observations from the posterior. Our empirical results show that with suitable hyper-parameters, the spike and slab bimodal method slightly outperforms the Bayesian lasso in the current analysis. Finally, a real example related to the China household finance survey is analyzed to illustrate the application of the methodology.. .

A multitude of factors influence our well-being and health in everyday life. Some of which we are totally aware like a delayed train, car exhausts, or continuous work stress. Other factors influence us on a subconscious level, making them, however, not less important to address. One of these factors is the built environment surrounding us almost every second of our lives. The idea of biophilic design states the importance of natural elements implemented in architectural structures to improve the occupants’ health and well-being. Adding to this field of research, this article targets the impact of biophilic design on positive emotions and productivity by using novel approaches like Facial Emotion Recognition (FER) with Residual Masking Networks, and sentiment detection using Large Language Models. Two separate but related studies were conducted and their results reported here. The first study measured emotions of people when confronted with images of different kinds of architecture, via FER (Facial Emotion Recognition) and also via a user survey. We distinguish between self-stated emotions entered through a survey by study participants, and emotions detected from studying the participants’ faces through AI from our FER (Facial Emotion Recognition) system. We found clear trends for most detected emotions, and significant evidence for self-stated emotions, that architecture implementing biophilic design evokes more positive emotions than one that does not. The second study measures the influence of natural elements on productivity and team-engagement. We found that natural elements do influence productivity and sentiment positively; however, only the change in sentiment was shown to be significant. As our sample size, especially for the second study, was relatively small, future research will apply these ideas in a larger setup to acquire further evidence for the importance of biophilic design for human well-being and health.

Radiomics involves the extraction of information from medical images not visible to the human eye. There is evidence these features can be used for treatment stratification and outcome prediction. However, there is much discussion about the reproducibility of results between different studies. This paper studies the reproducibility of CT texture features used in radiomics, comparing two feature extraction implementations namely Matlab toolkit and Pyradiomics when applied on independent datasets of CT scans of patients i) the open access RIDER dataset containing a set of repeat CT scans taken 15 minutes apart for 31 patients (RIDER Scan 1 and Scan 2 respectively) treated for lung cancer and ii) the open access HN1 dataset containing 137 patients treated for head and neck cancer. Gross tumor volume (GTV) manually outlined by an experienced observer available on both datasets was used. 43 common radiomics features available on Matlab and Pyradiomics were calculated using 2 intensity-level quantization methods with and without an intensity threshold. Cases were ranked for each feature for all combinations of quantization parameters and the Spearman’s rank coefficient, rs, calculated. Reproducibility was defined when a highly correlated feature in the RIDER dataset also correlated highly in the HN1 dataset and vice versa. 29 out of 43 reported stable features were found to be highly reproducible between Matlab and Pyradiomics implementations, having consistently high correlation in rank ordering for RIDER Scan 1 and RIDER Scan 2 (rs > 0.8). 18/43 reported features were common in RIDER and HN1 datasets, suggesting they may be agnostic to disease site. Useful radiomics features should be selected based on reproducibility. This study identified a set of features that meet this requirement and validated the methodology for evaluating reproducibility between datasets.

Fats and oils are the most common contaminants in wastewater and are usually discarded through physical processes. This paper studies its elimination through an environmentally friendly biological treatment, yielding good results on both laboratory scale and in the field. In this study a comparative evaluation of the biodegradation of fats and oils in two scenarios were developed in an activated sludge plant at laboratory scale, and a wastewater treatment plant. The full-scale values for some key parameters are compared, such as the oil concentration in the influent and effluent, mass loading and removal efficiency and biodegradation systems. Activated sludge plant at laboratory scale working on a mass load range from 0.2 to 0.8 (kg COD / day / kg MLSS) initially reaches levels of 75% biodegradation thereafter influent concentration is increased and thereby the mass load is increased in a range of working system under high load and biodegradation rates ranging from 71 to 64% are achieved. The actual system consists of a treatment plant wastewater with an aerobic digester for sludge treatment. Fats and oils are retained in a previous degreaser to biological treatment and subsequently sent to the aerobic sludge digester, constituting of thus on a single substrate, resembling an activated sludge plant with extended aeration mode, and levels of biodegradation in the range of 69 to 92%. From this work, we can say that the choice of biological treatment for fats and oils is feasible and adequate. Furthermore, the biomass presents great adaptability to the oil substrate, favored in this case for being the only source of carbon, therefore fats and oils should be removed using biological treatment, instead of the flotation procedure or at most using it as an intermediate process

In this study, cotton fabric reinforced phenolic resin (CPF) composites were modified by adding four two-dimensional fillers: graphitic carbon nitride (g-C3N4), graphite (Gr), molybdenum disulfide (MoS2), and hexagonal boron nitride (h-BN). The tribological properties of these modified materials were investigated under dry friction and water lubrication conditions. CPF/ Gr composite exhibits significantly better tribological performance than the other three fillers modified CPF composites under dry friction, with a 24% reduction in friction coefficient and a 78% reduction in wear rate compared to unmodified CPF composite. Under water lubrication conditions, all four fillers did not significantly alter the friction coefficient of the CPF composite. However, except for an excessive amount of Gr, the other three fillers can reduce the wear rate. Particularly, in the case of 10% MoS2 content, the wear rate decreased by 56%. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were employed for the analysis of the morphology and composition of the transfer films. Additionally, molecular dynamics (MD) simulations were conducted to investigate the adsorption effects of Gr, MoS2, and PF on the counterpart surface under both dry friction and water lubrication conditions. The difference in the adsorption capacity of Gr and MoS2 on the counterpart, as well as the resulting formation of transfer films, accounts for the variation in tribological behavior between CPF/Gr and CPF/MoS2 composites. By combining the lubrication properties of MoS2 and Gr under dry friction and water lubrication conditions, using them as co-fillers can achieve a synergistic lubrication effect.

Background: Recent studies have found forward head posture (FHP) to be associated with altered physiology, however, there is a lack of research into whether FHP is associated with altered gait parameters when cognitively challenged. The current study was undertaken to investigate the changes in gait parameters in asymptomatic individuals with FHP when a cognitive dual task is introduced during walking. Methods: Ninety asymptomatic participants were recruited, 45 having FHP defined as having a craniovertebral angle (CVA) < 50, and 45 sex and age-matched controls having normal head posture (NHP) defined as CVA > 55. All participants walked along a 10 meter platform under a control condition (no cognitive load) with 3 consecutive trials while an optical motion-capture system consisting of 8 infrared cameras was used to assess gait kinematics. Secondly, participants were assessed under a dual task cognitive load condition (3 trials while performing simple addition, counting backwards, and answering yes or no questions) to identify the impact on gait kinematics compared to the control condition. Results: Under the single task condition, there were no significant differences for any gait parameter, however, under the dual task condition, 12/13 gait parameters were significantly altered for the FHP group compared to the NHP group (p < .01). A calculation of dual task cost (DTC) percentage showed significant increases in all gait parameters in participants with FHP (p < .02). Correlations between the CVA and gait parameters were not significant for the single task condition, but all gait parameters were correlated to CVA for the dual task condition (p < .01). The correlation between CVA and DTC for all gait variables were also significant (p < .04). Conclusions: This study demonstrates that FHP significantly increases the cognitive cost during walking, highlighting the importance of proper postural alignment for maintaining cognitive function under a dual task condition. Addressing FHP through targeted interventions could improve both physical and cognitive health, enhancing overall well-being and daily functioning.

Ensuring optimal performance and reliability in rotor-bearing systems is crucial for industrial applications. Imbalance and shaft bow in these systems can lead to decreased efficiency and increased vibrations. Early detection and mitigation of a rotor’s faults are essential, and model-based fault identification has gained much attention in the manufacturing industry for years. Over the past two decades, however, the development of fault diagnosis rules with data-driven and artificial intelligence (AI) has become a trend, and in the foreseeable future, AI combined with big data will become mainstream. Nevertheless, the critical role of rotating machinery in manufacturing introduces a challenge, as the availability of fault data is often insufficient. This limitation renders the establishment of diagnostic rules using data-driven methods and AI technologies impractical. In light of these challenges, this study proposes a novel hybrid approach, that combines a physical model with machine learning (ML) techniques for the diagnosis of multi-faults (imbalance and shaft-bow demonstrated) in a Jeffcott rotor. To overcome the lack of real-world faulted, labeled datasets, a physics-based Jeffcott rotor model is first derived and then used to generate abundant fault datasets for ML. Subsequently, simulated data are employed for the training of an artificial neural network (ANN), enabling the network to learn from and analyze the vast array of generated data. The results prove that a well-trained feed-forward neural network (FNN) can accurately isolate and diagnose the imbalance and shaft-bow faults using the simulated data and the real data from the Jeffcott rotor experiment. These physics-based and ML approaches prove effective particularly for multi-fault, offering new possibilities for advanced rotor system monitoring and maintenance strategies in industrial applications.

Measles is a highly contagious airborne disease that is endemic in many developing countries with low levels of vaccination coverage. In this paper, we propose a deterministic compartmental mathematical model for measles disease dynamics. We establish the global stability conditions for the disease-free and endemic equilibria using the Lyapunov function stability method. \textcolor{red}{Using arbitrary parameters it is obtained that the proposed model exhibits forward bifurcation}. Numerical integration using MATLAB software was used to simulate the model solution of the forward problem. We calibrate the proposed model to estimate the parameters with a 95\% confidence interval (CI) using real data from Ethiopia by formulating an inverse problem. We notice that the model fits well with the real data of Ethiopia. The estimated basic reproduction number ($R_0$) is found to be $R_0=1.3973$ which proves that the disease is endemic. It is also obtained from the local sensitivity analysis that reducing the transmission rate and increasing the vaccination rate could effectively minimize the $R_0$.

Classification predictive modeling involves the accurate assignment of observations in a dataset to target classes or categories. There is an increasing growth of real-world classification problems with severely imbalanced class distributions. In this case, minority classes have much fewer observations to learn from than those from majority classes. Despite this sparsity, a minority class is often considered the more interesting class yet developing a scientific learning algorithm suitable for the observations presents countless challenges. In this article, we suggest a novel multi-class classification algorithm specialized to handle severely imbalanced classes based on the method we refer to as SAMME.C2. It blends the flexible mechanics of the boosting techniques from SAMME algorithm, a multi-class classifier, and Ada.C2 algorithm, a cost-sensitive binary classifier designed to address highly class imbalances. Not only do we provide the resulting algorithm but we also establish scientific and statistical formulation of our proposed SAMME.C2 algorithm. Through numerical experiments examining various degrees of classifier difficulty, we demonstrate consistent superior performance of our proposed model.

The synthesis of magnetic nanoparticles (MNPs) coated with hydrophilic poly-sodium-acrylate ligands (PSA) was studied to assess PSA-MNP complexes as draw solution (DS) solutes in forward osmosis (FO). For MNP-based DS, the surface modification and the size of the MNPs are two crucial factors to achieve a high osmolality. Superparamagnetic nanoparticles (NP) with functional groups attached may represent the ideal DS where chemical modifications of the NPs can be used in optimizing the DS osmolality and the magnetic properties allows for efficient recovery (DS re-concentration) using an external magnetic field. In this study MNPs with diameters of 4 nm have been prepared by controlled chemical co-precipitation of magnetite phase from aqueous solutions containing suitable salts of Fe2+ and Fe3+ under inert atmosphere and a pure magnetite phase could be verified by X-ray diffraction. Magnetic colloid suspensions containing PSA coated MNPs with three different molar ratios of PSA : MNP = 1:1, 1:2 and 1:3 were prepared and assessed in terms of osmotic pressure, aggregation propensity and magnetization. FTIR confirmed the presence of PSA on coated MNPs and pristine PSA-MNPs with a molar ratio PSA : MNP = 1:1 exhibited an osmotic pressure of 30 bar. Molar ratios of PSA : MNP = 1:2 and 1:3 lead to formation of less stabile magnetic colloid solutions which led to formation of aggregates with larger average hydrodynamic sizes and modest osmotic pressures (5.5 bar and 0.2 bar respectively). After purification with ultrafiltration, the 1:1 nanoparticles exhibited an osmotic pressure of 9 bar with no aggregation and a sufficient magnetization of 25 emu/g to allow for DS regeneration using an external magnetic field. However, it was observed that the amount of PSA molecules attached to the MNPs decreased during DS recycling steps leaving only strong chelate bonded core-shell PSA as coating on the MNPs. This demonstrates the crucial role of MNP coating robustness in designing an efficient MNP-based DS for FO.

The feed-forward loop (FFL) is an important and basic network motif to understand specific biological functions. Cyclic-AMP (cAMP) receptor protein (CRP), a transcription factor (TF), mediates catabolite repression and regulates more than 400 genes in response to changes in intracellular concentrations of cAMP in Escherichia coli. CRP participates in some FFLs like araBAD and araFGH operons and adapt to fluctuating environmental nutrients thus enhancing the survivability of E. coli. Although computational simulations have been used to explore the potential functionality of FFLs, a comprehensive study of the functions of all structural types based on in vivo data is lacking. Also, the regulatory role of CRP-mediated feed-forward loops (CRP-FFLs) remain unclear to date. Using EcoCyc and RegulonDB, we identified 393 CRP-FFLs in the E. coli. Dose-response genomic microarray of E. coli revealed dynamic gene expression of each target gene of CRP-FFLs in response to a range of cAMP dosages. All eight types of FFLs were present in CRP regulon with various expression patterns of each CRP-FFL, that were further divided into five functional groups. Microarray and reported regulatory relationships identified 202 CRP-FFLs which were directly regulated by CRP in these eight types of FFLs. Interestingly, 30% (147/482) of genes were directly regulated by CRP and CRP-regulated TFs, indicating that these CRP-regulated genes were also regulated by other CRP-regulated TFs responding to environmental signals through CRP-FFLs. Furthermore, we applied gene ontology annotation to reveal the biological functions of CRP-FFLs.

The combination of e-commerce and the green economy allows enterprises to distribute their green products directly to consumers through Internet channels. This paper investigates the impact of service spillovers on emission reduction and channel decisions in a two-echelon supply chain,in which the supplier is a Stackelberg leader and the retailer is a follower.By comparing the equilibrium outcomes of the single-channel and dual-channel supply chain in a setting with and without retail services, we observe that the supplier prefers to encroach on the market when services that retail locations provide largely spillover to and benefit the direct sales channel. Contrary to popular belief, a higher degree of service spillovers is beneficial for the retailer to get more returns under the dual-channel structure, whereas supplier encroachment will lead to a decline in the service level if the spillover degree is relatively low. In addition, the emission reduction level of products under supplier encroachment is always higher than that employed in the single-channel structure if consumers have both low-carbon preference and high degree of service sensitivity. Furthermore, we extend the equilibrium decisions under a carbon cap-and-trade (CCT) mechanism; the results fully verify the above conclusions. Interestingly, the implementation of a carbon price not only motivates carbon emission abatement and supplier encroachment, but also helps achieve a win-win outcome for supply chain members when service spillovers happen.

In contemporary narratives, the rural and regional identities of a place, as judged by its inhabitants’ sense of belonging, continue to be important points that need to be (re)considered when discussing places as instruments for local development. This paper pushes forward these debated and explores the construction of rural and regional identity in Romania with the help of a case study that focuses on two rural communities situated on opposite sides of the river Mureș. Based on participant and ethnographic observation and making use of a qualitative analysis, this paper highlights the most significant features of the local cultural identities expressed by the two sets of people, which often coincide with the most important characteristics attributed to the regions separated by the river Mureș. The results of this study underline the dividing role of a river in the preservation of rural and regional identity. They also demonstrate that rural identity construction along the river has generated both rural development opportunities and various risks.

A two-link model of exoskeleton with variable-length links for supporting the lower limbs of the human musculoskeletal system is proposed in the article. The researched model differs from the existing ones by the variable-length links, and by the angle calculation method. While in the existing models, the angles are calculated from the regular direction – from vertical, or from horizontal, - in the proposed research they are calculated between the links. As for practical exoskeleton implementation, the proposed method of angle calculation is appropriate to the actual working conditions of the electrical motors with the reduction gears installed in the hinges, which change the angles between the links. The mathematical model in the form of the system of Lagrange differential equations of the second kind is obtained. The obtained mathematical model is examined for existence and uniqueness of the Cauchy solution. The kinematic trajectory of the link motion has been synthesized. The controlling actions required for its implementation have been found.

The characterization of thin-film solar cells is of huge importance for obtaining high open-circuit voltage and low recombination rates from the interfaces or within the bulk of the main materials. Among the many electrical characterization techniques, the two- and four-wire probe using the Cascade instrument is of interest since the resistance of the wires, and the electrical contacts can be excluded by the additional two wires in 4-wire probe configuration. In this paper, both two and four-point probes configuration are employed to characterize the CIGS chalcogenide thin-film solar cells. The two-wire probe has been used to measure the current-voltage characteristics of the cell which results in a huge internal resistance. Therefore, the four-wire connection is also used to eliminate the lead resistance to enhance the characterization’s accuracy. The load resistance in the two-wire probe diminishes the photogenerated current density at smaller voltage ranges. In contrast, the proposed four-wire probe collects more current at higher voltages due to enhanced carrier collection efficiency from contact electrodes. The current conduction mechanism is also identified at every voltage region represented by the value of the ideality factor of that voltage region. It is observed that a long time given to the charge collection results in increased current density at a higher voltage. According to the results and device characteristics, a novel double-diode model is suggested to extract the saturation current density, shunt and series resistances and the ideality factor of the cells. These cells are shown to be efficient in terms of low recombination at the interfaces and with lower series resistance as the quality of the materials is in its most possible conductive form. The measured internal resistance and saturation current density and ideality factor of the two measurement configuration is measured and compared.

Abstract The relationship between cancer and neurodegeneration has spurred extensive scientific discourse, challenging their historical classification as distinct disorders. While cancer signifies uncontrolled cellular proliferation and neurodegeneration marks progressive neuronal loss, recent insights highlight intriguing interconnections between these seemingly disparate conditions. Cancer entails perpetual signaling for growth, evasion of growth inhibitors, resistance to cell death, acquisition of replicative immortality, stimulation of blood vessel growth (angiogenesis), and initiation of invasion and metastasis. Conversely, investigations emphasize disrupted cellular energy regulation and evasion of immune surveillance as key traits arising from genome instability, mutations, and inflammation driving tumorigenesis. Neurodegeneration involves neuronal malfunction and depletion, synaptic impairment, and protein abnormalities aggregations contributing to muscle atrophy and cognitive deficits. Varied clinical studies underscore contrasting correlations between cancer and neurodegeneration, hinting at mirrored molecular pathways that foster cell resilience or vulnerability. Research explores cellular signaling in tumorigenesis, shared with neurodegenerative disorders. Aberrant expression or mutations in crucial genes implicated in neurodegeneration also surface in cancer contexts. Debates persist on the nature of the relationship between cancer and neurodegeneration, contemplating inverse associations or shared pathways. Understanding their complex interplay, encompassing genetics, cellular mechanisms, and environmental influences, remains pivotal in unraveling their connections. This review explores the intriguing perspective that neurodegeneration and cancer might share fundamental genetic links, delving into potential implications for their onset and progression.

This article addresses the generic dynamic decision problem of how to achieve sustained market growth by increasing two interdependent organizational resources needed (1) to increase and (2) to sustain demand. The speed and costs of increasing each resource are different. Failure to account for this difference has been reported to lead to policies that drive a quick increase of demand followed by decline. Three generic policies derived from the literature have been implemented in a system dynamics model. Simulation shows that all three policies can generate sustained exponential growth but differ in performance. These results suggest that even policies which risk generating overshoot and collapse can avoid it. This poses two questions for further research: (1) what is the reasoning of human decision-makers when choosing between these policies and (2) how can the important but easily overlooked features of such decision situations be made sufficiently salient to be accounted for?

Northern Nigeria has had historically low antenatal care (ANC) utilization rates with poor health outcomes. Group antenatal care (gANC) improves ANC behavior and pregnancy outcomes. The gANC has been adopted in Kaduna and Kano states, Nigeria. This paper presents baseline findings from the evaluation of the implementation of the gANC program to support scaling in real-world setting. Baseline data were collected from a cohort of 1,269 and 1,200 pregnant women enrolled in gANC at health facilities in Kaduna and Kano states respectively from March to April 2024. Analyses of socio-demographic and pregnancy behavior data were done. Participants were mostly between ages 19-31 years, married or living with a partner, with over 50% having their own businesses. Over 62% and 34% had completed secondary or higher-level education with 60% and 80% living in urban areas in Kaduna and Kano States, respectively. In Kano State, >60% of the women had their last delivery at home with 41.6% not assisted by a skilled birth attendant. In Kaduna, >63% delivered in the hospital and >50% had skilled attendance during labor. Almost half had not used contraceptives previously. Subsequent longitudinal data will examine the impact of gANC utilization on perinatal outcomes.

The main purpose of this study is the determination of the optimal data acquisition and processing parameters of electric and seismic tomographic techniques, for the investigation of complex geological environments. Two different study areas, in central-east Peloponnese and SW Attica were selected, where a detailed geological mapping and surface geophysical survey were carried out. The applied geophysical survey included the application of electrical resistivity tomography (ERT) and seismic refraction tomography (SRT). The geoelectrical measurements were acquired with different arrays and electrode configurations. Moreover, various types of seismic sources were used at seventeen shot locations along the seismic arrays. For the processing of geoelectrical data, clustered datasets were created increasing the depth of investigation and the discriminatory capability. The seismic data processing included: (a) creation of synthetic models and seismic records to determine the effectiveness and capabilities of the technique, (b) spectral analysis of the seismic records to determine the optimal seismic source type and (c) inversion of the field data to create representative subsurface velocity models. The results of the two techniques successfully delineated the complex subsurface structure that characterizes these two geological environments. The application of the ERT combined with the SRT, are the two dominant, high-resolution techniques for the elucidation of complex subsurface structures.

The degradation and detachment of the polyamide (PA) layer in thin-film composite (TFC) membranes due to chlorine based chemical cleaning and material difference of PA layer and substrate are two major bottlenecks of forward osmosis (FO) technology. In this study, a new type of FO membranes were prepared by controlling self-polymerization of dopamine (DA) in the aqueous phase and the reaction with trimesoyl chloride (TMC) during interfacial polymerization (IP) process. These membranes were characterized by attenuated total reflection Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM) and water contact angle measurements. The influence of synthesis parameters such as pH of the aqueous phase, reaction time, temperature, and monomer concentrations were systematically investigated. The optimized membrane showed enhanced structure stability in ethanol (7.1 times higher) and chlorine resistance (72.3 times higher) than the conventional Piperazine(PIP)/TMC membrane due to（poly-dopamine）PDA bio-adhesion and polyester groups in the membrane structure. In general, DA/TMC membranes could be an effective strategy to fabricate high-performance FO membranes with excellent structural stability and chlorine resistance.

In this paper, a two-stage stochastic programming modelling is proposed to design a multi-period, multistage, and single-commodity integrated forward/reverse logistics network design problem under uncertainty. The problem involves both strategic and tactical decision levels. The first stage deals with strategic decisions, which are the number, capacity, and location of forward and reverse facilities. At the second stage tactical decisions such as base stock level as an inventory policy is determined. The generic introduced model consists of suppliers, manufactures, and distribution centers in forward logistic and collection centers, remanufactures, redistribution, and disposal centers in reverse logistic. The strength of proposed model is its applicability to various industries. The problem is formulated as a mixed-integer linear programming model and is solved by using Benders’ Decomposition (BD) approach. In order to accelerate the Benders’ decomposition, a number of valid inequalities are added to the master problem. The proposed accelerated BD is evaluated through small-, medium-, and large-sized test problems. Numerical results reveal that proposed solution algorithm increases convergence of lower bound and upper bound of BD and is able to reach an acceptable optimality gap in a convenient CPU time.

The verticals of 5G, such as the automotive, smart grid and smart cities sectors, will bring lots of new sensors and IoT devices requiring Internet connectivity. Most of these machine-type terminals will be sparsely distributed, covering a very large geographical area and, from time to time, will have to update their software, firmware and/or other relevant data. Given this situation, one viable solution to implement the “Over-the-Air” update of these IoT terminals can be with the aid of GEO satellite systems. However, due to the ultra-dense radio frequency reuse that contemporary High-Throughput Satellite (HTS) systems implement in the access link to serve the IoT terminals, the use of a time-packed Free Space Optical (FSO) link represents a practical solution to avoid the bottleneck that the satellite gateway experiences in the feeder link. The performance of both Detect-and-Forward and Decode-and-Forward relaying strategies are studied, assuming that the single-carrier M-PAM symbols that are transmitted on the optical feeder link are mapped into M-QAM symbols that modulate the multiple subcarriers of the OFDM-based radio access link. In addition, the benefits of encapsulating the NB-IoT frames into DVB-S2(X) satellite frames is also analyzed in detail. The effects of the impairments introduced in both optical feeder and radio access links are characterized in detail, and the end-to-end error correction capabilities of the Modulation and Coding Schemes (MCS) defined in the contemporary releases of the NB-IoT and DVB-S2(X) standards are studied for different working regimes.

Gravity forward modeling as a basic tool has been wildly used to topography correction and 3D density inversion. The source region is usually discretized into tesseroid (i.e., spherical prism) to consider the influence of the curvature of planets in global or large-scale problems. Traditional gravity forward modeling methods in spherical coordinates, including the Taylor expansion and Gaussian-Legendre quadrature, are all based on spatial domain, which are mostly low computational efficiency. This study proposes a high-efficient forward modeling method of gravitational fields in spherical harmonic domain, in which the gravity anomalies and gradient tensors can be expressed as spherical harmonic synthesis form of spherical harmonic coefficients of 3D density distribution. A homogeneous spherical shell model has been used to test its effectiveness compared with traditional spatial domain methods. It demonstrates that the computational efficiency of the proposed spherical harmonic domain method has improved by four orders of magnitude and with a similar level of computational accuracy compared with the optimized 3D GLQ method. Finally, the proposed forward method is applied to topography correction of the Moon. The results show that the gravity response of the topography by our method is close to that of the optimized 3D GLQ method, and is also consistent with previous results.

This paper proposes an optimal trading algorithm based on a novel application of the conventional Control Engineering (CE). We consider a fundamental CE concept, namely, the feedback control and apply it to the Algorithmic Trading (AT). The concrete feedback control strategy is designed in a form of the celebrated Proportional-Integral-Derivative (PID) model. The highly fluctuating nature of the modern financial markets has led to the adoption of a model-free realisation of the generic PID framework. The control theoretical methodology we propose is combined with the advanced statistics for the historical market data. We obtain a specific log-normal probability distribution function (pdf) associated with the specific quantities associated with the available stock data. The empirical log-normal pdf mentioned above makes it possible the necessary PID gains optimization. For this aim, we apply the data-driven optimization approaches and consider the corresponding Monte Carlo solution procedure. The optimized PID trading algorithm we propose is also studied in the Fourier analysis framework. This equivalent frequency domain representation involves a new concept in the financial engineering, namely, the "stock market energy" concept. For the evaluation, we implement the proposed PID optimal trading algorithm and develop a Python based prototype software. We finally apply the corresponding prototype software to a dataset from the Binance BTC / USDT stock market. The experimental result illustrates the implementability of the proposed optimal PID trading scheme and also shows the effectiveness of the proposed CE methods in the modern AT.

Infectious diseases continue to be a significant threat to human health and civilization, and finding effective methods to combat them is crucial. In this research, we investigate the impact of awareness campaigns and optimal control techniques on infectious diseases without proper vaccines. Specifically, we develop an SIRS type mathematical model that incorporates awareness campaigns through media and treatment for disease transmission dynamics and control. The model displays two equilibria, a disease-free equilibrium and an endemic equilibrium, and exhibits Hopf bifurcation when the bifurcation parameter exceeds its critical value, causing a switch in the stability of the system. We also propose an optimal control problem that minimizes the cost of control measures while achieving a desired level of disease control. By applying the minimum principle to the optimal control problem, we obtain analytical and numerical results that show how the infection rate of the disease affects the stability of the system and how awareness campaigns and treatment can maintain system stability. This study highlights the importance of awareness campaigns in controlling infectious diseases and demonstrates the effectiveness of optimal control theory in achieving disease control with minimal cost.

Rising sensitivity of the loads with respect to power quality has grown-up the consideration of power system study and power quality enhancement systems. The fluctuation of voltage outside the normal working range due to faults may lead to unsuitable interruption of wind turbines. This thesis present 1.5MW grid connected Adama Ⅰ Wind Farm in Ethiopia with the objectives to capture the optimal power from the wind and ensure voltage source for sensitive load. This paper deals with the effective voltage sag mitigation and Harmonic distortion effectively met IEEE 519-1992 standard under all Phase to ground fault compensation by using Dynamic Voltage Restorer (DVR), to regulate the terminal voltage of the wind farm and safe operation of sensitive load. The DVR utilizes a feed forward control-based algorithm to generate PWM. The simulation results are going to be carried out by MATLAB-Simulink to verify the operation and effectiveness of DVR during balanced voltage sag and swell conditions.

Decision tree algorithms have been among the most popular algorithms for interpretable (transparent) machine learning since the early 1980s. On the other hand, deep learning methods have boosted the capacity of machine learning algorithms and are now being used for non-trivial applications in various applied domains. But training a fully-connected deep feed-forward network by gradient-descent backpropagation is slow and requires arbitrary choices regarding the number of hidden units and layers. In this paper, we propose near-optimal neural regression trees, intending to make it much faster than deep feed-forward networks and for which it is not essential to specify the number of hidden units in the hidden layers of the neural network in advance. The key idea is to construct a decision tree and then simulate the decision tree with a neural network. This work aims to build a mathematical formulation of neural trees and gain the complementary benefits of both sparse optimal decision trees and neural trees. We propose near-optimal sparse neural trees (NSNT) that is shown to be asymptotically consistent and robust in nature. Additionally, the proposed NSNT model obtain a fast rate of convergence which is near-optimal up to some logarithmic factor. We comprehensively benchmark the proposed method on a sample of 80 datasets (40 classification datasets and 40 regression datasets) from the UCI machine learning repository. We establish that the proposed method is likely to outperform the current state-of-the-art methods (random forest, XGBoost, optimal classification tree, and near-optimal nonlinear trees) for the majority of the datasets.

The main aims of this study were (1) to identify and compare the major biologically active compounds in the metabolome of ligulate and tubular flowers of two C. officinalis cultivars, ‘Golden Sea’ (GS) and ‘Paradise Garden’ (PG), and (2) to investigate the effect of different proportions of ligulate and tubular flowers in the inflorescences on their metabolome. Ultra-performance liquid chromatography with photodiode array detection and a Q Exactive Orbitrap high-resolution mass spectrometer were used to analyse the flower metabolome. Analysis of the metabolomics data revealed that polar lipids showed the most significant differences between flowers. Tubular flowers of PG and GS cultivars contained higher levels of 31 and 34 out of 36 lipids, respectively. Furthermore, tubular flowers of both cultivars contained significantly higher levels of phenolamides and caffeoylquinic acids, but lower levels of triterpenoids. To compare the metabolite content of the two C. officinalis cultivars, we analysed the data for their inflorescences. The study showed that GS inflorescences contained significantly higher levels of phenolic compounds and lipids than PG inflorescences. This GS advantage was due to two factors: firstly, the higher content of these metabolites in tubular flowers and, secondly, the higher proportion of tubular flowers in GS inflorescences.

Mathematical modeling is the most important tool for constructing the theory of different kinds of two-phase flows. The review is devoted to the analysis of the advent of the approach of mathematical modeling of two-phase flows, where solid particles act mainly as the dispersed phase. The main problems and features of the study of gas-solid two-phase flows are excluded. The main characteristics of gas flows with solid particles are given and the classification of two-phase flows is developed on their basis. The Lagrangian and Euler approaches to modeling the motion of a dispersed phase (particles) are described. Much attention is paid to the consideration of numerical simulation methods that describe descriptions of turbulent gas flow at different hierarchical levels (RANS, LES, DNS), different levels of description of interphase interactions (one-way coupling (OWC), two-way coupling (TWC) and four-way coupling (FWC)), as well as at different levels of interface resolution (partial-point (PP) and particle-resolved (PR)). Excluded are examples of some studies carried out on the basis of the identified approaches, as well as their exclusion for mathematical modeling of various classes of gas-solid two-phase flows.

The pharmaceutical market consists mainly of chemical and biological drugs. These drugs act on different types of targets and have distinct pharmacological properties. Generally, chemical drugs bind to the active site of target enzymes and easily penetrate the cell membrane owing to their small size; however, biological drugs can bind to the protein–protein interaction site but are less stable due to their protein properties. Cyclic peptides possess the pharmacological merits of both chemical and biological drugs, such as the ability to bind to the protein–protein interaction site and penetrate cell membranes. In this study, we developed a simple two-step system to generate a cyclic peptide library using the split intein of Npu DnaE and Gateway cloning. The first step is the PCR of Ready-to-use(R) template DNA having the coding sequences of random cyclic peptides between two split intein elements NpuC and NpuN and the recombination recognition site of Gateway cloning. The second step is the transformation of the PCR products via Gateway cloning to produce colonies with expression vectors to produce cyclic peptides comprising random amino acid sequences. The expression vectors in randomly chosen transformed colonies were confirmed to have random cyclic peptide sequences and all the clones, except ones having a stop codon in the cyclic peptide coding region, showed the expected protein splicing result. This simple two-step system for bacterial expression systems may be modified to suit various expression systems for cell-based assays.

Using coherent optical detection and digital signal processing, laser phase noise and equalization enhanced phase noise can be effectively mitigated using the feed-forward and feed-back carrier phase recovery approaches. In this paper, theoretical analyses of feed-back and feed-forward carrier phase recovery methods have been carried out in the long-haul high-speed n-level phase shift keying (n-PSK) optical fiber communication systems, involving a one-tap normalized least-mean-square (LMS) algorithm, a block-wise average algorithm, and a Viterbi-Viterbi algorithm. The analytical expressions for evaluating the estimated carrier phase and for predicting the bit-error-rate (BER) performance (such as the BER floors) have been presented and discussed in the n-PSK coherent optical transmission systems by considering both the laser phase noise and the equalization enhanced phase noise. The results indicate that the Viterbi-Viterbi carrier phase recovery algorithm outperforms the one-tap normalized LMS and the block-wise average algorithms for small phase noise variance (or effective phase noise variance), while the one-tap normalized LMS algorithm shows a better performance than the other two algorithms for large phase noise variance (or effective phase noise variance). In addition, the one-tap normalized LMS algorithm is more sensitive to the level of modulation formats.

Motivated by empirical observations, we propose a possible extension of Gibrat's law. By applying it into the random growth theory of income distribution (Gabaix, 2009), we find that the income distribution is described by a generalized Pareto-type distribution (GPD) with three parameters. We observe that there is a parameter /elta in the GPD that plays a key role in determining the shape of income distribution. By using the Kolmogorov-Smirnov test, we empirically show that, for typical market-economy countries, /elta is close to 0 significantly, such that the income distribution is characterized by a two-class pattern in which the bottom 90% of the population is approximated by an exponential distribution and the richest 1%~3% is approximated by an asymptotic power law. However, we empirically find that, for China both in planned economy period and in early stages of market reformation (from 1978 to 1990), /elta is significantly deviated from 0, such that the bottom of the population no longer conforms to an exponential distribution.

For two-dimensional forward-looking sonar imaging, high sidelobes significantly degrade the quality of sonar images. The cosine window function weighting method is often applied to suppress the sidelobe levels in the angular and range dimensions at the expense of the main lobe resolutions. Therefore, the improved spatially variant apodization imaging method for forward-looking sonar is proposed to reduce the sidelobes without degrading the main lobe resolution in angular-range dimensions. The proposed method is a nonlinear post-processing operation in which the raw complex-valued sonar image produced by a conventional beamformer and matched filter is weighted by a spatially variant coefficient. To enhance the robustness of the spatially variant apodization approach, the array magnitude and phase errors are calibrated to prevent beam sidelobe heightening from occurring prior to beamforming operations. The analyzed results of numerical simulations and a lake experiment demonstrate that the proposed method can greatly reduce the sidelobes to approximately -40 dB, while the main lobe width remains unchanged. Moreover, this method has an extremely simple computational process.

Eutrophication is a major environmental issue with many negative consequences, such as hypoxia and harmful cyanotoxins production. Monitoring coastal eutrophication is a crucial, especially for island countries like the Republic of Cyprus, which are economically dependent on the touristic sector. Additionally, the open-sea aquaculture industry in Cyprus has been exhibiting an increase in the last decades and environmental monitoring to identify possible signs of eutrophication is mandatory according to the legislation. Therefore, in this modelling study, two different types of Artificial Neural Networks (ANNs) are developed based on in situ-data collected from stations located in the coastal waters of Cyprus. Theses ANNs aim to model the eutrophication phenomenon based on two different data-driven modelling procedures. Firstly, the self-organizing map (SOM) ANN examines several water quality parameters (specifically water temperature, salinity, nitrogen species, ortho-phosphates, dissolved oxygen and electrical conductivity) interactions with the Chlorophyll-a parameter. The SOM model enables us to visualize the monitored parameters relationships and to comprehend complex biological mechanisms related to Chlorophyll-a production. A second feed-forward ANN model is also developed for predicting the Chlorophyll-a levels. Based on this ANN model, several scenarios associated to the eutrophication-related water quality parameters can be extracted. The combination of these two ANNs models is considered a holistic modelling approximation for the identification of eutrophication scenarios, since it enables not only the prediction of the Chlorophyll-a parameter levels, but also the “capturing” of hidden biological mechanisms associated with algal production.

We provide methodology and numerical results for the Hattendorff differential equa- tion for the continuous time evolution of the variance of L(j)t , the loss at time t random variable for a multi-state process, given that the state at time t is j.

Electrospun nanofiber-supported thin film composite membranes are among the most promising membranes for seawater desalination via forward osmosis. In this study, a high-performance electrospun polyvinylidenefluoride (PVDF) nanofiber-supported TFC membrane was successfully fabricated after molecular layer-by-layer polyelectrolyte deposition. Negatively-charged electrospun polyacrylic acid (PAA) nanofibers were deposited on electrospun PVDF nanofibers to form a support layer consisted of PVDF and PAA nanofibers. This resulted to a more hydrophilic support compared to the plain PVDF nanofiber support. The PVDF-PAA nanofiber support then underwent a layer-by-layer deposition of polyethylenimine (PEI) and PAA to form a polyelectrolyte layer on the nanofiber surface prior to interfacial polymerization, which forms the selective polyamide layer of TFC membranes. The resultant PVDF-LbL TFC membrane exhibited enhanced hydrophilicity and porosity, without sacrificing mechanical strength. As a result, it showed high pure water permeability and low structural parameter values of 4.12 Lm⁻²h⁻¹bar⁻¹ and 221 µm, respectively, significantly better compared to commercial FO membrane. Layer-by-layer deposition of polyelectrolyte is therefore a useful and practical modification method for fabrication of high performance nanofiber-supported TFC membrane.

Investigation of oomycete diversity in rice paddies of Fars Province in Iran led to the identification of two new Pythium sensu lato (s.l.) species as Globisporangium izadpanahii sp. nov. and Pythium banihashemianum sp. nov. The identification was based on morphological and physiological features as well as the phylogenetic analysis of nuclear (ITS and βtub) and mitochondrial (cox1 and cox2) loci using Bayesian inference and Maximum Likelihood. A major characteristic of G. izadpanahii was the production of globose hyphal swellings; this species did not produce vesicles and zoospores. The present paper describes formally these two new species and defines their phylogenetic relationships with other congeneric species. According to multiple gene genealogy analysis, G. izadpanahii grouped with other species of Globisporangium in the former clade G of Pythium s.l. and was closely related to both G. nagaii and the recently described G. coniferarum. The second species, designated P. banihashemianum, grouped with other species of Pythium sensu stricto in the former clade B of Pythium s.l. and according to the phylogenetic analysis shared an ancestor with P. plurisporium. In pathogenicity tests on rice seedlings, P. banihashemianum isolates were highly pathogenic causing severe root and crown rot, while G. izadpanahii isolates were not pathogenic.

Powered ankle prostheses have been proven to improve the walking economy of people with transtibial amputation. All commercial powered ankle prostheses that are currently available can only perform one-degree-of-freedom motion in a limited range. However, studies have shown that the frontal plane motion during ambulation is associated with balancing. In addition, as more advanced neural interfaces have become available for people with amputation, it is possible to fully recover ankle function by combining neural signals and a robotic ankle. Accordingly, there is a need for a powered ankle prosthesis that can have active control on not only plantarflexion and dorsiflexion but also eversion and inversion. We designed, built, and evaluated a two-degree-of-freedom (2-DoF) powered ankle-foot prosthesis that is untethered and can support level-ground walking. Benchtop tests were conducted to characterize the dynamics of the system. Walking trials were performed with a 77 kg subject that has unilateral transtibial amputation to evaluate system performance under realistic conditions. Benchtop tests demonstrated a step response rise time of less than 50 milliseconds for a torque of 40 N·m on each actuator. The closed-loop torque bandwidth of the actuator is 9.74 Hz. Walking trials demonstrated torque tracking errors (root mean square) of less than 7 N·m. These results suggested that the device can perform adequate torque control and support level-ground walking. This prosthesis can serve as a platform for studying biomechanics related to balance and has the possibility of further recovering the biological function of the ankle-subtalar-foot complex beyond the existing powered ankles.

Planktonic foraminiferal biomineralization intensity, reflected by their shell calcite mass, affects global carbonate deposition and is known to follow the climate cycles by being increased during glacial stages and decreased during interglacial ones. Here we measure the dissolution state and the mass of the shells of the planktonic foraminifera species Globigerina bulloides from a Tropical Eastern North Atlantic site over the last two glacial-interglacial climatic transitions and we report no major changes in plankton calcite production with the atmospheric pCO2 variations. We attribute this consistency in foraminifera calcification to the climatic and hydrological stability of the tropical regions. We however recorded increased shell masses midway through the penultimate deglaciation (Termination II). In order to elucidate the cause of the increased shell weights we performed δ18O, Mg/Ca and μCT measurements on the same shells from a number of samples surrounding this event. We find that shells of increased mass are internally contaminated by sediment infilling and that shell weights are responding to local hydrographic changes.

In 2021, an operational research study in two tertiary hospitals, Freetown, showed poor hand hygiene compliance. Recommended actions were taken to improve the situation. Between February-April 2023, a cross-sectional study was conducted in the same two hospitals using the WHO Hand Hygiene tool to assess hand hygiene practices and compare hand hygiene compliance with that observed between June-August 2021. In Connaught hospital, overall hand hygiene compliance improved from 51% to 60% (P<0.001), and this applied to both handwash actions with soap and water and alcohol-based-hand-rub: significant improvements were found in all hospital departments and amongst all healthcare worker cadres. In 34 Military Hospital (34MH), overall hand hygiene compliance decreased from 40% to 32% (P<0.001), with significant decreases observed in all departments and amongst nurses and nursing students. The improvements in Connaught Hospital were attributed to more hand hygiene reminders, better handwash infrastructure and more frequent supervision assessments compared with 34MH where interventions were less well applied, possibly due to extensive hospital reconstruction at the time. In conclusion, improved distribution of hand hygiene reminders, better handwash infrastructure and frequent supervision assessments are effective, and need to be strengthened, scaled-up and combined with other innovative ways to promote good hand hygiene practices.

Background: We aimed to evaluate the impact of two different phytotherapeutic agents on the decision making regarding prostate biopsy in patients with higher-than-normal prostate-specific antigen (PSA) levels. Methods: From June 2022 to May 2023, all patients attending two urological institutions due to higher-than-normal PSA levels were randomized to receive either oral capsules of Curcuma Longa, Boswellia, Pinus pinaster and Urtica dioica (Group A) or Serenoa Repens 320 mg (Group B), for 3 months. At the follow-up visit after 3 months all patients underwent PSA test and multiparametric magnetic resonance imaging (mpMRI). Results: In the per-protocol analysis, data from 66 patients in Group A and 76 in Group B were analyzed. Fifty patients in Group A (75.7%) showed a significant reduction of total PSA compared to 49 in Group B (64.4%) (p<0.001). Twenty-eight patients had PI-RADS III or higher at mpMRI: 12 in Group A and 14 in Group B. Twenty-three patients (34.8%) in Group A underwent prostate biopsy based on mpMRI findings and PSA values and 59 (77.6%) in Group B (p<0.001). Three patients in Group A showed a significant reduction of total PSA value while having positive findings at mpMRI (6%) compared with 9 in Group B (19.5%) (p<0.001). On the contrary, 7 patients in Group A did not show a significant reduction of total PSA value and had negative findings at mpMRI (43%) compared to 22 in Group B (81.4%) (p&lt;0.001). Conclusions: In conclusion, a three-month course of a combination of Curcuma Longa, Boswellia, Pinus pinaster, and Urtica dioica seems an interesting tool to avoid unnecessary prostate biopsies in men with higher-than-normal PSA levels.

Building deep learning models proposed by third parties can become a simple task when specialized libraries are used. However, a great deal of mystery still surrounds the design of new models or the modification of existing ones. These tasks require in-depth knowledge of the different components or building blocks as well as their dimensions. This information is limited and broken up in different literature. In this article, we collect and explain in-depth the building blocks to design deep learning models, starting from the artificial neuron to the concepts involved in building deep neural networks. Furthermore, the implementation of each building block is exemplified using the Keras library.

Opium smoking for long hours and over many years is common in Iran, and the Covid-19 pan-demic and false beliefs about the protective effects of that opium against COVID-19 infection has caused the increasing of opium smoking during the pandemic. The aim of this study was to in-vestigate the relationship between non-ergonomic positions of traditional opium smoking in Iran with the occurrence of neck pain and disability, forward head posture and hyperkyphosis. In this cross-sectional and correlation study 120 people who smoke opium were selected based on the inclusion criteria and were interviewed about their addiction profile and evaluated for the pres-ence of pain and disability in the neck by Maudsley Addiction Profile, Leeds Dependence Ques-tionnaire, the Visual Analog Scale and Neck Disability Index. Also, they were evaluated about forward head posture (FHP) through side view photography and hyperkyphosis (HK) through flexible ruler. Data were analyzed by correlation coefficient tests and stepwise linear regression. There was a significant relation between homelessness, the duration of lifetime opium smoking (months), the duration of daily opium smoking (minutes) and drug dependence severity with the severity of neck pain, neck disability, forward head posture and hyperkyphosis. Homelessness is the strongest predictive variable of the possibility of neck pain and disability, FHP and HK, fol-lowed by ‘‘the number of months of opium smoking’’ and ‘‘the number of minutes of opium smoking in one day’’ respectively. Increasing the duration of sitting in non-ergonomic positions can lead to neck pain and disability, FHP and HK due to their non-neutral posture in opium smokers.

Novel TFN membranes were examined for the removal of heavy metals (Cu and Pb) from synthetic wastewater in forward osmosis (FO) experiments using MgCl2 as a draw solute. The TFN membranes were fabricated on top of a commercial PS35 ultrafiltration membrane by in-situ interfacial polymerization of piperazine (PIP) and 1,3,5-benzenetricarbonyl trichloride (TMC) containing different amounts of dispersed functionalized halloysite nanotubes (HNTs) nanoparticles. The HNTs nanoparticles were functionalized with the first generation of poly(amidoamine) (PAMAM) dendrimers. The TFN and the control TFC membranes showed rejections of Cu2+ and Pb2+, ranging from 94.5% to 98.1%. The presence of heavy metal in the feed solution enhanced the FO performance of all membranes. In particular, the reverse flux of MgCl2 decreased at least 2.5 times compared to the experiments with pure water as a feed. Simultaneously, the water flux also increased. The improved FO performance of the membranes in the presence of heavy metal ions is attributed to their adsorption by the membranes. The adsorption of heavy metals was confirmed by a decrease in the negativity of zeta potential and the results from inductively coupled plasma mass spectrometry (ICP-MS) of the membranes after the FO experiments.

Semantic rules link purely theoretical terms like “price” and “electron” to things we can measure. Without them, theories cannot be tested empirically. When inappropriate, they produce false rejections. Economists routinely ignore semantic rules. Empirical journal articles essentially never mention them. More to the point, the conventional tests that reject the Law of One Price and Purchasing Power Parity never consider them. As a result, those rejections are unwarranted because such tests use inappropriate semantic rules. Both theories should be restored to not rejected and then retested using the more appropriate semantic rules described here. By using appropriate semantic rules, this paper is able to combine Covered Interest Parity and Purchasing Power Parity into a single theory that links auction markets for financial assets and commodities to auction markets for exchange rates. Using appropriate semantic rules for both theories also explains several puzzles in open economy macroeconomics and opens up broad new vistas for research.

A novel machine learning approach is presented in this paper, based on extracting latent information and using it to assist decision making on ambulance attendance and conveyance to a hospital. The approach includes two steps: in the first, a forward model analyzes the clinical and, possibly, non-clinical factors (explanatory variables), predicting whether positive decisions (response variables) should be given to the ambulance call, or not; in the second, a backward model analyzes the latent variables extracted from the forward model to infer the decision making procedure. The forward model is implemented through a machine, or deep learning technique, whilst the backward model is implemented through unsupervised learning. An experimental study is presented, which illustrates the obtained results, by investigating emergency ambulance calls to people in nursing and residential care homes, over a one-year period, using an anonymized data set provided by East Midlands Ambulance Service in United Kingdom.

Aminoacyl-tRNA synthetases (aaRSs) originated from an ancestral bidirectional gene (mirror symmetry) and through the evolution of the genetic code the twenty aaRSs exhibit a symmetrical distribution in a 6-dimensional hypercube of the Standard Genetic Code. In this work, we assume a primeval RNY code, and the Extended Genetic RNA code type II which includes codons of the type YNY, YNR and RNR. Each of the 4 subsets of codons can be represented in a 4-dimensional hypercube. Altogether these 4 subcodes constitute the 6-dimensional representation of the SGC. We identify the aaRSs' symmetry groups in each of these hypercubes. We show that each of the four hypercubes contains the following sets of symmetries for the two known Classes of synthetases: RNY: dihedral group D2; YNY: binary group Z2; YNR: amplified octahedral group Oh; and RNR: binary group Z2. We demonstrate that for each hypercube, the group of symmetries of Class 1 is the same as the group of symmetries of Class 2. The biological implications of these findings are discussed.

Weathering and erosion transport minerals and organics toward the sea or lake bottoms over geologic time. The finest solids are deposited in lower, less turbulent areas, such as lake bottoms and continental shelves. They sometimes stack up to thicknesses of kilometers, and begin compacting. These sediment sections are called shales, and as initially deposited in water, shales can have porosities up to 50-80{\%} water, As they are buried, many alteration products from oil to slate are produced due to overburden and temperature increasess, making them important to study. A preceeding paper \cite{1} showed that pressure solution is the primary mechanism for porosity reduction, with possible mechanical compaction at shallow depths. Without naming the mineral(s) involved, it postulated that the greater the product of the water and pore interfaces, the faster the reaction would proceed. This term is $ \varphi^{4m/3}(1-\varphi)^{4n/3}$ , where $\varphi$ is porosity and m and n are numbers close to unity. The large exponents, {\em 4/3}, recognize that the reaction occurs at the molecular scale at which the surfaces are rough. A second term, $\exp^{(-E/RT)}$ , indicates that the reaction is impeded by a quantum energy barrier, E, with diminished impeding power as increased available thermal energy, represented by the absolute temperature, T, becomes available at greater depths in the Earth. These two factors combine to allow porosity $\varphi$ to reduce with time, or equivalently for the fraction of solids, $(1-\varphi)$, to increase with time,$\left. \frac{\partial(ln(1-\varphi) ) }{\partial t } \right |_{\sigma} = (\varphi )^{4m/3}( 1-\varphi )^{4n/3}Ae^{-E/(RT)}$. { \em Here it is shown that this equation can cover quantitatively any actual deposition rates which may have been experienced by the six sections studied, the actual deposition rates being unknown for these cases. Hence a time-depth depositional history for any new shale section, known in detail, would allow determination of the parameters m, n, E and a lumped proportionality constant A. This was accomplished by showing that, for a wide range of depositional rates, r, the range of E for any of the studied sections is small compared to laboratory measurements of quartz solution\cite{2}, 24+-15kJ/mol. Results were obtained over this range of r's using the previously determined m and n, and porosity and temperature profiles. The presently existing porosity profiles necessarily incorporate any overpressure or underpressure conditions that may have existed in the past or currently, as the net difference between overburden and pore pressure is a primary driving force for pressure solution. $SiO_2$ usually comprises 20-50{\%} of shales. In conclusion, pressure solution of quartz can account for vertical compaction of shales quantitatively in the studied examples. Separately, a quasi-eqivalent method for discussing reduced porosities in Macron 2 versus Macron 1 as increased vertical stress, rather than additional horizontal stress, is illustrated. Experiments are suggested to clarify the pressure solution mechanism. The role of horizontal forces is discussed.

In this study novel recommendations are presented and substantiated for selecting the number of modes and optical thicknesses of flat lattice slabs that make up the microreliefs, which minimize the computational complexity of the rigorous coupled-wave analysis calculation of the diffraction efficiency (DE) of a sawtooth two-layer two-relief microstructure, while maintaining the specified reliability of the calculation results. The computational complexity can be controlled by allowing one or another level of oscillation of the DE curves depend on the angle of incidence of the radiation incident on the microstructure. In particular, the complexity of the multi-thousand DE calculations in the optimization process can be reduced by using the proposed methodology as well as increased computational complexity to certify the accuracy of the solution obtained as a result of implemented optimization.

The prognosis of patients with recurrent or metastatic of the head and neck squamous-cell carcinoma (HNSCC) refractory to platinum-based chemotherapy is severe and, consequently, the identification of therapeutic options for this category of patients is a priority. Nivolumab, an anti- programmed cell death protein 1 (anti-PD-1) monoclonal antibody, has been approved for the treatment of recurrent or metastatic HNSCC after platinum-based therapy progressing. We present the early experience of two academic center including diagnostic, clinical, biological, therapeutic and outcomes characteristics of head and neck cancer (HNC) patients treated with Nivolumab. The purpose of the study is to identify certain peculiarities and to report them compared to the data from the literature in order to generate some hypotheses that coud constitute criteria for the selection of cases with maximum benefit to immunotherapy. Analyzing the data obtained from 18 patients treated in Emergency County Hospital Craiova, "Saint Nectarie" Oncological Hospital Craiova and Euroclinic Oncological Center Iasi January 2020 and March 2023 it could be hypothesized that lower nadir values of neutrophil to lymphocyte ratio (<3.5) and the adition of intensive regimens of chemotherapy and radiotherapy could justify a favorable response in terms of progression free survival (PFS) during immunotherapy with Nivolumab. To our knowledge, the study included the first two cases of second primary malignancy (SPM) in the head neck region treated with Nivolumab. The reported data support a possible benefit of the sequential administration of radiotherapy, immunotherapy for SPM cases. Higher positive dynamic of neutrophil to lymphocyt ratio (NLR) could be associated with worst outcome during immunotherapy. All study observations including the role of infections and antibiotic treatment as well as the possible biomarker value of NLR variation during immunotherapy should be investigated in multicenter clinical trials.

Cerebellar ataxia, neuronopathy, and vestibular areflexia syndrome (CANVAS) is caused by biallelic pathogenic expansions, or compound heterozygosity with other pathogenic variants in the RFC1 gene. CANVAS is estimated to be underdiagnosed, both because of the lack of formal diagnostic criteria and molecular challenges that translate to lesser access and high cost of routine testing. Our aim was to address the need for making CANVAS genetic testing routine, by designing a streamlined two-step PCR consisting of a short-allele screening PCR and a confirmatory PCR with fragment capillary electrophoresis detection. Exome sequencing of RFC1 was additionally foreseen to resolve potential compound heterozygosity cases. Specificity of our approach was evaluated using ataxia patients with known non-CANVAS diagnoses, and optimized using Southern blot confirmed CANVAS patients. We evaluated our approach by testing patients consecutively referred for clinically suspected CANVAS using first the two-step PCR, followed by exome sequencing. Our approach was able to accurately identify negative and confirm positive cases in prospectively collected suspected CANVAS patients presenting with at least three typical clinical signs. The proposed testing approach provides an alternative method able to clearly distinguish between CANVAS negative and positive cases and can be easily incorporated into the genetic diagnostic laboratory workflow.

We evolve our past models PYR, Loukeris, et al. (2016) to provide a competitive system whose infiltration of categorical information and fundamentals into advanced higher moments, supports a more objective Portfolio Selection, aided by Intelligent Computing. The system of Portfolia Yield Reactives (PYR) searches for hidden prototypes into big data of accounting and financial statements, restricting malicious patterns such as hoax, noise, manipulation, incorporated to a novel optimal portfolio selection method.

The information technology has brought in a revolution in the area of digital agriculture and hydrological modeling . With the advent of IOT and AI such as machine learning is now capable of Predicating flood forecast , drought forecast and farms based water predications. In this article various machine learning algorithms , multiple sensors for environmental and agricultural has been proposed and used . The purpose is to acquire data of soil moisture , temperature , crop stages, irrigation and precipitation on a region constitute of two farms and then performed machine learning predications for total discharge predications at farms outlets so that in case of excessive rainfall or an irrigation event the water is adjusted in the second nearby farm or reroute to a reservoir for future use to avoid flooding. The focus is mostly to work on the concept and building of an andriod -ardiuno based mobile application for the endusers (agricultural system analyst, farmers) to provide an ease. The whole system of smart agricultural based on two farms and reservoir will provide an efficient ,fully automatic, proactive and decision support system to save water waste and reuse. In future the work is also in progress for developing a desktop based application .

Chronic HCV infection and associated liver cancer impose a heavy burden on the healthcare system. Direct acting antivirals eliminate HCV, unless it is drug resistant, and partially reverse liver disease, but they cannot cure HCV-related cancer. Possible remedy could be a multi-component immunotherapeutic vaccine targeting both HCV-infected and malignant cells, also those not infected with HCV. To meet this need we developed a two-component DNA vaccine based on the highly conserved core protein of HCV to target HCV-infected cells, and a renowned tumor associated antigen telomerase reverse transcriptase (TERT) based on the rat TERT, to target malignant cells. Their synthetic genes were expression-optimized, and HCV core was truncated after aa 152 (Core152opt) to delete the domain interfering with immunogenicity. Core152opt and TERT DNA were highly immunogenic in BALB/c mice, inducing IFN-γ/IL-2/TNF-α response of CD4+ and CD8+ T cells. Also, DNA-immunization with TERT enhanced cellular immune response against luciferase encoded by a co-delivered plasmid (Luc DNA). However, DNA-immunization with Core152opt and TERT mix resulted in abrogation of immune response against both components. A loss of bioluminescent signal after co-delivery of TERT and Luc DNA into mice indicated that TERT affects the in vivo expression of luciferase directed by the immediate early cytomegalovirus and interferon-β promoters. Panel of mutant TERT variants was created and tested for their expression effects. TERT with deleted N-terminal nucleoli localization signal and mutations abrogating telomerase activity still suppressed the IFN-β driven Luc expression, while the inactivated reverse transcriptase domain of TERT and its analogue, enzymatically active HIV-1 reverse transcriptase, exerted only weak suppressive effects, implying that suppression relied on the presence of the full-length/nearly full-length TERT, but not its enzymatic activity. The effect(s) could be due to interference of the ectopically expressed xenogeneic rat TERT with biogenesis of mRNA, ribosomes and protein translation in murine cells, affecting the expression of immunogens. HCV core can aggravate this effect, leading to early apoptosis of co-expressing cells, preventing the induction of immune response.

Background: According to metacognitive theory, Cognitive–Attentional Syndrome (CAS) is a transdiagnostic factor and main mechanism of psychopathology maintenance. The main goal of this study was to examine whether CAS predicted symptoms of stress and trauma-related symptomatology in the first months of the COVID-19 pandemic and three months later. Methods: Initially 1,792 participants were recruited online via social media; data was collected at two time points. Measures included the Cognitive–Attentional Syndrome Questionnaire, Adjustment Disorder – New Module 20, the International Trauma Questionnaire, and additional measures. Results: Structural equation modeling was conducted in order to determine relations between reported stressors, CAS, and symptomatology. At both time points, CAS was a significant mediator between stressors and symptoms of adjustment disorder. Despite the decrease in the intensity of adjustment disorder symptoms between waves, it was a significant predictor of other psychopathology at both time points, except for traumatic stress. Conclusions: The findings confirm the assumption that CAS is a transdiagnostic factor of psychopathology, and has a mediating role in the relationship between stressors and adjustment disorder and co-occurring symptomatology. The effect was particularly significant in the initial phase of the pandemic, which was highly stressful for many people.

We compare the effect on amyloid fibril formation by two homologous proteins from the family of cystatins, human stefin B (stB) and cystatin C (cysC) in presence of 3 polyphenols: curcumin, resveratrol and quercetin and 2 non-phenolic anti-oxidants: vitamin C (VitC) and N-acetyl cystein (NAC). Some of the experimental data have already been presented, here we compare, further discuss and highlight the results. The amyloid fibril formation was followed by ThT fluorescence and transmission electron microscopy. Inhibitory effects on amyloid fibrillation reaction depended on anti-oxidant class and concentration. The fact that different effect of polyphenols was observed with the two cystatins; Cur acted inhibitory on stB but not on cysC fibril formation, could be explained if the 3 polyphenols would not bind to the same binding site in the fibrils core. Other differences are pointed out and discussed. Synergistic effects of VitC and chosen polyphenols on amyloid fibrilllation of human stB have been explored and are reported here for the first time.

Hybrid power plants have recently emerged as reliable and flexible electricity generation stations by combining multiple renewable energy sources, energy storage systems (ESS), and fossil-based output. However, the effective operation of the hybrid power plants to ensure continuous energy dispatch under challenging conditions is a complex task. This paper proposes a dispatch engine (DE) based on mixed-integer linear programming (MILP) for the planning and management of hybrid power plants. To maintain the committed electricity output, the dispatch engine will provide schedules for operation over extended time periods as well as monitor and reschedule the operation in real-time. Through precise prediction of the PV and wind power output, the proposed approach guarantees optimum scheduling. The precise prediction of the PV and wind power are achieved by employing a predictor of Feed-Forward Neural Network (FFNN) type. With such a dispatch engine, the operational cost of the hybrid power plants, and the use of diesel generators (DGs) are both minimized. A case study is carried out to assess the proposed dispatch engine feasibility. A real-time measurement data pertaining to load, wind, and PV power outputs is obtained from different locations in the Sultanate of Oman. The real-time data is utilized to predict the future output power from PV and the Wind farm over 24 hours. The predicted powers are then used in combination with a PV-Wind-DG-ESS-Grid hybrid plant to evaluate the performance of the proposed dispatch engine. The proposed approach is implemented and simulated using MATLAB. The results of the simulation reveal the proposed Feed-Forward Neural Network’s (FFNN) powerful forecasting abilities. In addition, the results demonstrate that adopting the proposed DE can minimize the use of DG units and reduce plant running expenses.

Cooperative non-orthogonal multi access communication is a promising paradigm for the future wireless networks because of its advantages in terms of energy efficiency, wider coverage and interference mitigating. In this paper, we study the secrecy performance of a downlink cooperative non-orthogonal multi access (NOMA) communication system under the presence of an eavesdropper node. Smart node selection based on feed forward neural networks (FFNN) is proposed in order to improve the physical layer security (PLS) of a cooperative NOMA network. The selected cooperative relay node is employed to enhance the channel capacity of the legal users, where the selected cooperative jammer is employed to degrade the capacity of the wiretapped channel. Simulations of the secrecy performance metric namely the secrecy capacity ($C_S$) are presented and compared with the conventional technique based on fuzzy logic node selection technique. Based on our simulations and discussions the proposed technique outperforms the existing technique in term the of secrecy performance.

We work within a Winterberg framework where space, i.e., the vacuum, consists of a two component superfluid/super-solid made up of a vast assembly (sea) of positive and negative mass Planck particles, called planckions. These material particles interact indirectly, and have very strong restoring forces keeping them a finite distance apart from each other within their respective species. Because of their mass compensating effect, the vacuum appears massless, charge-less, without pressure, net energy density or entropy. In addition, we consider two variable models, where, , is Newton’s constant, and, , increases with an increase in cosmological time. We argue that there are at least two competing models for the quantum vacuum within such a framework. The first follows a strict extension of Winterberg’s model. This leads to nonsensible results, if increases, going back in cosmological time, as the length scale inherent in such a model will not scale properly. The second model introduces a different length scale, which does scale properly, but keeps the mass of the Planck particle as, the Planck mass. Moreover we establish a connection between ordinary matter, dark matter, and dark energy, where all three mass densities within the Friedman equation must be interpreted as residual vacuum energies, which only surface, once aggregate matter has formed, at relatively low temperatures. The symmetry of the vacuum will be shown to be broken, because of the different scaling laws, beginning with the formation of elementary particles. Much like waves on an ocean where positive and negative planckion mass densities effectively cancel each other out and form a zero vacuum energy density/ zero vacuum pressure surface, these positive mass densities are very small perturbations (anomalies) about the mean. This greatly alleviates, i.e., minimizes the cosmological constant problem, a long standing problem associated with the vacuum.

Electricity demand forecasting plays a significant role in energy markets. Accurate prediction of electricity demand is the key factor to optimize power generation, consumption, saving energy resources, and determining the energy prices. However, integrating energy mix scenarios, including solar and wind power which are highly non-linear and seasonal, into an existing grid increases uncertainty in generation, adds the challenges for precise forecast. To tackle these challenges, state-of-the-art methods and algorithms have been implemented in literature. We have developed Artificial Intelligence (AI) based deep learning models that can effectively handle the information of long time-series data. Based on the pattern of dataset, four different scenarios were developed and two best scenarios were selected for prediction. Dozens of models were developed and tested in deep AI networks. In the first scenario (Scenario1), data for weekdays excluding holidays was taken and in the second scenario (Scenario2) all the data in the basket was taken. Remaining two scenarios, weekends and holidays were tested and neglected because of their high prediction error. To find the optimal configuration, models were trained and tested within a large space of alternatives called hyper-parameters. In this study, an Aritificial Neural Network (ANN) based Feed-forward Neural Network (FNN) showed the minimum prediction error for Scenario1 while a Recurrent Neural Network (RNN) based Gated Recurrent Network (GRU) showed the minimum prediction error for Scenario2. While comparing the accuracy, the lowest MAPE of 2.47% was obtained from FNN for Scenario1. When evaluating the same testing dataset (non-holidays) of Scenario2, the RNN-GRU model achieved the lowest MAPE of 2.71%. Therefore, we can conclude that grouping of weekdays as Senario1 prepared by excluding the holidays provides better forecasting accuracy compared to the single group approach used in Scenario2, where all the dataset is considered together. However, Scenario2 is equally important to predict the demand for weekends and holidays.

This paper presents a theoretical analysis of an International conflict, i.e. East Pakistan Crisis, 1971, and reveals that unequal development creates conflict in society. Natural resource scarcity and environmental degradation can also become a source of conflict, so marginalised and excluded people fight for their rights through non-peaceful means. This essay supports the theoretical approaches of poverty, environment, and conflict nexus and reveals that unequal development and resource scarcity deepens the poverty and creates conflicts in the society, causing harm to the environment. The degraded environment increases the poverty as environment and poverty are interlinked, and the poor have limited choices other than to degrade the environment for their survival. This vicious downward spiral link between poverty and degradation of the environment requires working extensively for poverty alleviation to reverse the environmental decline.