Ammonia is an atmospheric pollutant, predominantly emitted from agriculture, leading acidification and eutrophication of soil and water and contributing to secondary PM2.5. The implementation of accurate emission inventories with high spatial and time resolution plays a fundamental role in the development of air modelling simulation and in the impact assessment of actions for air quality improvement. The development and release of new algorithms and the increase of data availability are supporting the implementation of machine learning approaches in environmental and air quality data analysis. In this paper we present a methodology developed by the application of the Random Forest algorithm to bottom-up local emission inventories of ammonia to validate annual time series of ammonia emissions and calculate high resolution temporal profiles. The model has been trained and tested by the hourly measurements of ammonia concentrations and atmospheric turbulence parameters starting from a constant emission scenario. The initial values of emissions are calculated based on a bottom-up emission inventory detailed at the municipal basis and considering a circular area of about 4 km radius centered on measurement sites. By comparing predicted and measured concentrations, the emissions are modified, the model's training and testing are repeated, and the model converges to a very high performance in predicting ammonia concentrations and establishing an hourly time changing emission profile. The site-specific emissions profiles, estimated by the proposed methodology, clearly show a nonlinear relation with measured concentrations and allow to identify the effect of atmospheric turbulence on pollutant accumulation. The estimated time series well confirm the available data of the emission inventories and the monthly emission profiles have been compared with estimated data from satellite.

Tropical forest and savanna biomes are pivotal in the functioning of the Earth system. Tropical forests are one of the largest terrestrial biosphere carbon pools, whereas savannas exchange carbon between the biosphere and atmosphere via frequent and extensive landscape fires. Both are biodiverse and under increasing threat due to land clearing and anthropogenic climate change. Reliable mapping of tropical forest and savanna is essential to provide understanding of how anthropogenic impacts are affecting the extent of these biomes. Using Google Maps satellite imagery, we manually classified 24,239 random points as forest, savanna, or anthropogenic landscapes within the tropics. Because fire and climate are correlated, we developed separate geospatial models to rank the importance of climate, topography, and human influence on vegetation present. This modelling confirmed that those areas with more fires had lower probabilities of tropical forest, that forest was most likely in areas with high mean annual rainfall with little seasonal variation in precipitation, and that anthropogenic factors disrupt this environmental predictability. We found there were environments where tropical forest and savanna were equally probable are geographically restricted. These relationships suggest that future drier climates projected under anthropogenic climate change, combined with clearing and burning that have reduced tropical forest extent to a subset of its theoretical distribution, will lead to irreversible loss of tropical forests. Our modelling provides global mapping that can be used track further changes to distribution of rainforests.

Tropical forests provide habitats for diverse flora and fauna. In addition, they are essential in regulating the climate while at the same time millions of people depend on them for their livelihoods. As seen by rising political commitment and worldwide promises to reduce rates of deforestation and boost restoration of degraded forest ecosystems, forests are becoming more widely acknowledged for their role as a nature-based solution to many sustainable development concerns. Understanding tropical forest dynamics and their conservation have so become more important. This study analyzed, the forest stand structure, tree species composition, abundance and diversity and the regeneration status of Londiani Forest. Londiani Forest is divided into three blocks, namely Kedowa, Chebewor and Londiani and from each of these blocks belt transects 25 m wide and 1 km long were established 100 m from the edge of the forest to reduce edge effects. At every 200 m along the transect, 25 m × 25 m quadrats were set up in which, an inventory of all tree species was done. For tree species that could not be identified in the field, the local name was provided by para-taxonomists who participated in the data collection and the species name was later identified with the help of a taxonomist or a manual of woody tree species of Londiani Forest. The diameter at breast height (DBH) was measured at 1.3 m from the ground using a diameter tape. Tree height was measured using a Suunto angular clinometer. A nested quadrat 5 m x 5 m quadrat within the 25 m x 25 m quadrat was used to sample saplings while a 1 m x 1 m quadrat was used for sampling seedlings. Regeneration status was assessed using the number of seedlings and saplings. Stumps of trees cut were counted including identifying tree species from which the tree stump was derived. Data from the quadrats were entered into Microsoft Excel. Total stem density, species density, basal area, species basal area, relative density and species diversity were determined. A total of 1,308 individual trees belonging to 34 different species from 24 families were recorded. Kedowa had the highest (27) species richness followed by Chebewor (19) then Londiani (14). There was a statistically significant difference in species richness among the three forest blocks (p<0.05). There were no statistically significant differences in the mean DBH (F=0.560; p=0.729) and height class distribution (F= 0.821, p=.558) among the three forest blocks. There was a statistically significant difference in stem density (F=12.22; p=0.005) and woody species diversity (F=0.32; p=0.001) within the three forests blocks. There was no statistically significant difference in the basal area distribution within the three forest blocks p>0.005. The similarity index ranged from 0.34 to 0.47. In all the forest blocks, there was evidence of seedlings and saplings indicating that there was regeneration. Results clearly show that while the Londiani Forest shows variation in characteristics, there is clear evidence that it is regenerating.

Mount Hamiding Protected Forest is located in North Halmahera Regency, North Maluku Province, the Wallace zone has an important role in providing protection functions, life support systems and regulating water management, preventing floods, preventing seawater intrusion, and controlling soil fertility. The protected forest area in the Wallace Zone is globally renowned for its endemic characteristics of flora and fauna. The condition of the protected forest of Mount Hamiding HMPF is currently experiencing anthropogenic damage as a result of forest encroachment, illegal logging, shifting cultivation, grazing and poaching to meet social needs. Anthropogenic damage has been in the spotlight for decades and has become a global issue. This study aims to determine damage to protected forests, changes in land cover, and mitigation of protected forest areas. This research uses quantitative and descriptive qualitative methods. Determination of research locations by purposive sampling. Parameters measured in this study were damage to protected forests, changes in land cover and area mitigation strategies. To identify forest damage, snowball sampling was carried out, and land cover changes through land cover data processing were obtained from the Ministry of Environment and Forestry of the Republic of Indonesia. Then using Imagery 7 ETM+ and 8 OLI to calculate changes in forested land to non-forested from 2006 -2021, analysis of land cover change using supervised classification, developing a strategy based on identity verification of forest damage and analysis of land cover change. The results showed that damage to protected forests was caused by anthropogenic disturbances in the form of forest encroachment, shifting cultivation, illegal logging, grazing and hunting of wild animals. Changes in land cover experienced the greatest damage in 2006-2021 amounting to 1,796.54 ha (16.17%). Strategic efforts are carried out using forest engineering, namely the agroforestry system and social engineering through community empowerment, namely training and outreach.

The Botryosphaeriales order are best known for the diseases they cause in woody plants, as primary pathogens or latent pathogens residing in the woody tissue of asymptomatic hosts. In the first instance, Botryosphaeriales species have been identified in Venezuela using morphological de-scriptions in the 80's and 90's, and later, the mid-2000s using molecular techniques. The mor-phological descriptions of the asexual morphs were initially used for the identification of Botry-osphaeriales genera and species. Lasiodiplodia spp., (as L. theobromae) was the most isolated fungus in Venezuela within the Botryosphaeriales and has been found in more than 50% of the hosts in native and non-native plants, followed by Diplodia, Dothiorella, Fusicoccum, Lasiodiplodia, Micro-diplodia, Macrophomina, Neofusicoccum, Sphaeropsis, and Botryosphaeria, considered all of them cosmopolitan group. With molecular studies, that included DNA sequence data from multiple genes, such as the internal transcribed spacer of rDNA (ITS), translation elongation factor-1α (tef1), and β-tubulin (btub) used on the fungi isolated from woody plants, mainly trees or forest species, resulted in the presence of two families within the Botryosphaeriales order for Venezuela. Botryosphaeriaceae family with the genera: Botryosphaeria, Cophinforma, Diplodia, Lasiodiplodia and Neofusicoccum, and the Pseudofusicoccumaceae family that includes the genus Pseudofusicoccum. In Botryosphaeriaceae family was again the Lasiodiplodia genus the most predominant in most hosts, and the specie L. theobromae the most isolated in native and non-native plants; Botryosphaeria dothidea, Cophinforma atrovirens, Diplodia scrobiculata (syn. Diplodia guayanensis), Lasiodiplodia brasi-liensis, L. crassispora, L. pseudotheobromae, Neofusicoccum arbuti (syn. N. andinum), N. parvum, and N. ribis are cosmopolitan species, and they were isolated from native and non-native plants; while Pseudofusicoccum stromaticum was found in plantations non-native of Acacia mangium, E. urophylla x E. grandis, Eucalyptus urophylla, and reported exclusively in South America; Lasiodiplodia venezue-lensis has only been reported in Venezuela, from native and non-native plants. The presence, distribution, diversity, and symptoms of these fungi, mainly of the new genus, new species, and reports found in Venezuela and other parts of the world, were also reviewed.

A primary challenge facing conservationists is reconciling the human needs of forest adjacent communities with the needs of conserving forest biodiversity, especially in tropical regions with growing populations of rural poor. Agroforestry has the potential to simultaneously provide for human needs and enhance forest biodiversity, but the complex interactions and feedbacks between the social and natural dimensions are relatively undescribed and thus systematic implementation is rare. The attributes of trees on farms required for human needs and conservation value may conflict. For example, exotic species in monoculture may provide the most economic value for farmers, while relic or planted indigenous tree mixtures may be more valuable for biological conservation. The objective of this study was to explore whether agroforestry practices in a moist tropical forest ecosystem in Kenya can simultaneously provide timber and fuelwood value to small-holder farmers while extending forest tree biodiversity. We described the agroforestry attributes on farms around a tropical forest, assessed the relationship between number and biomass of timber/fuelwood trees and tree biodiversity, and explored the relationships between forest tree diversity attributes and farm tree diversity attributes on a landscape scale using spatial analysis. We found that the diversity and number of trees on farms in this area are extensive yet variable, but that no significant relationship exists between the number of timber/fuelwood trees and tree diversity. This suggests that the two values of agroforestry may not be in conflict, due mainly to the high diversity of trees used for fuelwood. We also found that trees on farms in the larger landscape add to the conservation value of forest tree biodiversity and could be important components in conservation management. If agroforestry is to play an increasingly active role in conserving biodiversity in human-dominated landscapes, particularly in areas of dense subsistence farmer populations, increase recognition needs to be given to farmer’s perception of the value of trees and their selection of what trees to plant or maintain.

Portable Document Format (PDF) is one of the most widely used files types worldwide in data exchange, this has encourage hackers to utilize such files to spread any malicious content through PDF, utilizing different methods and techniques to accomplish that, on the other hand, security researches kept trying to improve detection methods to cope up to the rapidly increasing number of malwares daily, one of the commonly used detection technique nowadays is by utilizing artificial intelligence and Machine learning classificat; thision to help detecting PDF Malwares, in this paper, we utilize machine learning classifier Random Forest on a newly released PDF Malware dataset CIC-Evasive-PDFMal2022 to achieve the main goal of detecting malicious PDF documents, results showing a detection accuracy of around 99.5%

Antimicrobial peptides (AMPs) are considered as promising alternatives to conventional antibiotics in order to overcome the growing problems of antibiotic resistance. Computational prediction approaches receive an increasing interest to identify and design the best candidate AMPs prior to the in-vitro tests. In this study, we focused on the linear cationic peptides with non-hemolytic activity, which are downloaded from the Database of Antimicrobial Activity and Structure of Peptides (DBAASP). Referring to the MIC (Minimum inhibition concentration) values, we have assigned a positive label to a peptide if it shows antimicrobial activity; otherwise the peptide is labeled as negative. Here, we focused on the peptides showing antimicrobial activity against Gram-negative and against Gram-positive bacteria separately, and we created two datasets accordingly. Ten different physico-chemical properties of the peptides are calculated and used as features in our study. Following data exploration and data preprocessing steps, a variety of classification algorithms are used with 100-fold Monte Carlo Cross Validation to build models and to predict the antimicrobial activity of the peptides. Among the generated models, Random Forest has resulted in the best performance metrics for both Gram-negative dataset (Accuracy: 0.98, Recall: 0.99, Specificity: 0.97, Precision: 0.97, AUC: 0.99, F1: 0.98) and Gram-positive dataset (Accuracy: 0.95, Recall: 0.95, Specificity: 0.95, Precision: 0.90, AUC: 0.97, F1: 0.92) after outlier elimination is applied. This prediction approach might be useful to evaluate the antibacterial potential of a candidate peptide sequence before moving to the experimental studies.

Forest fire identification is important for forest resource protection. Effective monitoring of forest fires requires the deployment of multiple monitors with different viewpoints, while most traditional recognition models can only recognize images from a single source. By ignoring the information from images with different viewpoints, these models produce high rates of missed and false alarms. In this paper, we propose a graph neural network model based on the similarity of dynamic features of multi-view images to improve the accuracy of forest fire recognition. The input features of the nodes on the graph are converted into relational features of different gallery pairs by establishing pairs (nodes) representing different viewpoint images and gallery images. The new feature library relationship is used to update the image gallery with dynamic features in order to achieve the estimation of similarity between images and improve the image recognition rate of the model. In addition, to reduce the complexity of image pre-processing process and extract key features in images effectively, this paper also proposes a dynamic feature extraction method for fire regions based on image segment ability. By setting the threshold value of HSV color space, the fire region is segmented from the image, and the dynamic features of successive frames of the fire region are extracted. The experimental results show that, compared with the baseline method Resnet, this paper's method is more effective in identifying forest fires, and its recognition accuracy is improved by 2%. And the scheme of this paper can adapt to different forest fire scenes, with better generalization ability and anti-interference ability.

Tree biomass and diversity relationship in mixed forest impacts on forest ecosystem services provisions. Tree biomass yield is driven by several aspects such as species identity, site condition, stand density, tree age as well as tree diversity expressed as species mingling and structural diversity. By comparing diverse degrees of tree mixture in natural forests we can insight on the ecosystem services provision level and dynamic. Two monitoring sites in the Castilian Northern Plateau (Spain) have been analyzed to disentangle the relationships between biodiversity levels and tree biomass yield. Two permanent one ha squared plots were established at Llano de San Marugan and Valdepoza. In each plot all individual trees were measured (diameter and height), georeferenced and its species identity defined. Tree species in the two sites were Pinus sylvestris, Pinus nigra, Pinus pinea, Quercus pyrenaica, Quercus ilex, Quercus faginea and Juniperus thurifera. From these datasets ten diversity indices that fall in three categories (species richness indices, species compositional/mingling indices and vertical structural indices) were used as predictor variables to fit several candidate models. By merging the trees by site (without considering the species identity) selected models include individual tree basal area as explanatory variable combining by addition or interaction with diversity indices. When species are analyzed independently structural diversity impacts on biomass yield in combination (additive or multiplicative) with tree size is negative Pinus nigra and positive for the other species.

A strategy to reduce qualitative and quantitative losses in crop-yields refers to early and accurate detection of insect-damage caused in plants. Remote sensing systems like hyperspectral proximal sensors are a promising strategy for managing crops. In this aspect, machine learning predictions associated with clustering techniques may be an interesting approach mainly because of its robustness to evaluate high dimensional data. In this paper, we model the spectral response of insect-herbivory-damage in maize plants and propose an approach based on machine learning and a clustering method to predict whether the plant is herbivore-attacked or not using leaf reflectance measurements. We differentiate insect-type damage based on the spectral response and indicate the most contributive wavelengths to perform it. For this, we used a maize experiment in semi-field conditions. The maize plants were submitted to three different treatments: control (health plants); plants submitted to Spodoptera frugiperda herbivory-damage, and; plants submitted to Dichelops melacanthus herbivory-damage. The leaf spectral response of all plants (controlled and submitted to herbivory) was measured with a FieldSpec 3.0 Spectroradiometer from 350 to 2500 nm for eight consecutive days. We evaluated the performance of different learners like random forest (RF), support vector machine (SVM), extreme gradient boost (XGB), neural networks (MLP), and measured the impact of a day-by-day analysis into the prediction. We proposed a novel framework with a ranking strategy, based on the accuracy returned by predictions, and a clusterization method based on a self-organizing map (SOM) to identify important regions in the reflectance measurement. Our results indicated that the RF-based framework algorithm is the overall best learner to deal with this type of data. After the 5th day of analysis, the accuracy of the algorithm improved substantially. It separated the three treatments into different groups with an F-measure equal to 0.967, 0.917, and 0.881, respectively. We also verified that the most contributive spectral regions are situated in the near-infrared domain. We conclude that the proposed approach with machine learning methods is adequate to monitor herbivory-damage of S. frugiperda and stink bugs like Dichelops melacanthus in maize, differentiating the types of insect-attack early on. We also demonstrate that the framework proposed for the analysis of the most contributive wavelengths is suitable to highlight spectral regions of interest.

The many strains of Cannabis spp. are associated with many effects on users and contain many different potentially psychoactive metabolites, but the links between metabolite profiles and user effects are unclear. Here we take a statistical approach to linking cause (i.e. metabolites) to effects in Cannabis spp. through the prism of strains, using quantitative data for metabolite composition and user effects. We find that species (indica vs. sativa) explains <2% of the variability in metabolite profiles, while strain explains 1/3 of variability, indicating species is nonindicative of metabolite composition, while strain is approximately indicative. Using random forests we generate a table of potential metabolite-effect links. We also find that effect-weighted metabolite composition can effectively be described in terms of four values representing the concentrations of pairs or triplets of particular compounds.

Background and Objectives: The site types of Eucalyptus urophylla × Eucalyptus grandis clonal plantations in southern Yunnan were compared, aiming to provide basis for site selection and scientific plantations management. Materials and Methods: In this study, 80 standard plots were set up in the 6−9-year-old Eucalypts plantations in Pu'er City and Lincang City. Furthermore, the quantitative theory I model and canonical correlation analysis were used to analyze the relationship between dominant tree growth traits and site factors, and evaluate the growth potential of E. urophylla × E. grandis plantation. Results: The multiple correlation coefficient between 8 site factors (altitude, slope, slope level, soil thickness, slope direction, texture, soil bulk density, and litter thickness) and the quantitative growth of the dominant wood was 0.825 (P < 0.05). According to the correlation coefficient of the quantitative regression model, slope, altitude, and soil thickness were the main factors for the classification of E. urophylla × E. grandis plantations in southern Yunnan. In addition, E. urophylla × E. grandis plantations grew best downhill and mid uphill at relatively low altitude, where the soil layer was thick and composed of weathered red soil. Contrastingly, E. urophylla × E. grandis plantation growth was extremely poor in uphill sites at higher altitude, where the soil layer was thin and composed of semi-weathered purple soil. Furthermore, total N, and available B, Cu, and Zn content, as well as soil organic matter content in the soil had a great influence on the growth of E. urophylla × E. grandis. Conclusions: Nitrogen and phosphate fertilizer as well as trace elements such as B, Zn, and Cu can be properly applied in middle- and low-yield forests to promote the growth and development of E. urophylla × E. grandis plantations.

Soil proteases are involved in the transformation of organic matter and thus influence the nutrient turnover in the ecosystem. Phytohormones, similarly to proteases, are synthesized and secreted into the soil by fungi and microorganisms and regulating their activity in the rhizosphere. The aim of our work was to find out how the presence of auxins, cytokinins, ethephone and chlorocholine chloride affects the activity of native soil proteases at the spruce tree stand. Auxins stimulated the native proteolytic activity in the spruce tree stand. Synthetic auxins most stimulated the activity of 2-naphthoxyacetic acid and the naturally occurring auxins of indole-3-acetic acid in the organic horizon of the spruce forest. Cytokinins, ethephone and chlorocholine chloride inhibited the activity of native soil proteases in the spruce tree stand. The highest inhibitory effect was found in ethephone and chlorocholine chloride. Overall, the negative effect of phytohormones on the activity of the native proteolytic activity may slow down the decomposition of organic matter and thus make plant nutrition more difficult. The outcomes of our work assist with understanding of the effect of substances produced by the rhizosphere on the activity of soil microorganisms and the soil nitrogen cycle.

Mapping settlement extents at the annual time step has a wide variety of applications in demography, public health, sustainable development, and many other fields. Recently, while more multitemporal urban feature or human settlement datasets have become available, issues still exist in remotely-sensed imagery due to coverage, adverse atmospheric conditions, and expenses involved in producing such feature sets. These challenges make it difficult to increase temporal coverage while maintaining high fidelity in the spatial resolution. Here we demonstrate an interpolative and flexible modeling framework for producing annual built-settlement extents. We use a combined technique of random forest and spatio-temporal dasymetric modeling with open source subnational data to produce annual 100m x 100m resolution binary settlement maps in four test countries of varying environmental and developmental contexts for test periods of five-year gaps. We find that in the majority of years, across all study areas, the model correctly identified between 85-99% of pixels that transition to built-settlement. Additionally, with few exceptions, the model substantially out performed a model that gave every pixel equal chance of transitioning to the category “built” in each year. This modelling framework shows strong promise for filling gaps in cross-sectional urban feature datasets derived from remotely-sensed imagery, provide a base upon which to create future built/settlement extent projections, and further explore the relationships between built area and population dynamics.

The effects of heterogeneity of cooperative membership on cooperative and collective action sustainability has been previously discussed. However, despite the importance of membership heterogeneity in recent theoretical frameworks, empirical examinations have been limited. We determine the effect of changes to cooperative member heterogeneity on cooperative sustainability and discuss changes to heterogeneity overtime that can advance our understanding to cooperative sustainability long-term. This study uses USDA Agricultural Management Resource Survey data, coupled with USDA-Rural Development cooperative financial data at the state level, to quantify effects of cooperative member heterogeneity to sustainability of U.S. farmer cooperatives. We use random forest regression to interpret the significance of heterogeneity with cooperative sustainability at an aggregate level. The findings of this empirical study narrowly reconciles the theoretical understanding of the emergence of intra-cooperative issues while providing consistent empirical evidence and expectations for the sustainability of cooperatives in the near term.

Rapid urbanization has changed the structure and function of natural ecosystems, especially the floodplain ecosystems in SE Asia. This paper describes the ecological structure of vegetation stands and the usefulness of satellite images to characterize a disturbed tropical urban forest located in the lower floodplain of the Chao Phraya River, Thailand. Nine representative plots were established in Bang Kachao peninsula in 4 tropical urban forest types: rehabilitation forest, home-garden agroforestry, mangrove and park. The correlation between NDVI and LAI obtained from satellite images and plant structure from field surveys were analyzed. The NDVI had the highest relationship with stand factors for the number of families, number of species, Shannon-Weiner’s diversity index and total basal area. The LAI had the highest correlation with total basal area, number of canopy layers, stand density and canopy density. Linear regression predicted the correlation between NDVI and LAI with stand factors as show above. The trend in NDVI and LAI reflected the urban forest type, being high in rehabilitation and mangrove forests, moderate in home-gardens and low in parks. Future urban planning of the Bang Kachao peninsula should focus on rehabilitation to increase the biodiversity and complexity of the urban forest.

Wildfires have always been a part of the history of Mediterranean forests. However, forest regeneration after a wildfire is not certain. It depends on many factors, some of which may be influenced by land management activities. Failure of regeneration will cause a regime shift in the ecosystem, reducing the provision of ecosystem services and ultimately leading to desertification. How can we increase Mediterranean forests’ resilience to fire? To answer this question, we did a literature review, investigating chains of processes that allow forests to regenerate (which we label “regeneration mechanisms”), and assessed the impact of selected management practices documented in the WOCAT database on the regeneration mechanisms. We identified three distinct regeneration mechanisms that enable Mediterranean forests to recover, as well as the time frame before and after a fire in which they are at work, and factors that can hinder or support resilience. The three regeneration mechanisms enabling a forest to regenerate after a fire consist of regeneration (1) from a seed bank; (2) from resprouting individuals; and (3) from unburned plants that escaped the fire. Management practices were grouped into four categories: (1) fuel breaks, (2) fuel management, (3) afforestation, and (4) mulching. We assessed how and under what conditions land management modifies the ecosystem’s resilience. The results show that land management influences resilience by interacting with resilience mechanisms before and after the fire, and not just by modifying the fire regime. Our analysis demonstrates a need for adaptive – i.e. context- and time-specific – management strategies.

Increased wildfire activity is the most significant natural disturbance affecting forest ecosystems, with a strong impact on their natural regeneration. This study presents a comprehensive analysis of post-fire forest recovery using Landsat time series data from 2000 to 2023 in the Middle Volga region of the Russian Federation. The analyses utilised the LandTrendr algorithm in Google Earth Engine (GEE) cloud computing platform to examine Normalized Burn Ratio (NBR) spectral metrics and quantify the forest recovery at low, moderate, and high burn severity (BS) levels. To assess the spatio-temporal trends of the recovery, the Mann–Kendall statistical test and Theil–Sen’s slope estimator was applied. The results suggested that the post-fire spectral recovery is significantly influenced by the degree of the BS on affected areas. The higher the class of BS, the faster and more extensive the reforestation of the area occurs. About 91% (40,446 ha) of the first 5-year forest recovery after the wildfire belong to the BS classes of moderate and high severity. A regression model showed that land surface temperature (LST) was more significant to post-fire recovery than the variability in precipitation (Pr), explaining about 65% of the variance in post-fire recovery. This study provides new insights into the post-fire forest recovery dynamics and scientific bases for the cost-effective management strategies under changing climate conditions.

Historical forest management practices in the southwestern US have left forests prone to high intensity, stand-replacement fires. Effective management to reduce the cost and impact of forest-fire management and allow fires to burn freely without negative impact depends on detailed knowledge of stand composition, in particular, above-ground biomass (AGB). Lidar-based modeling techniques provide opportunities to reduce costs and increase ability of managers to monitor AGB and other forest metrics. Using Bayesian Model Averaging (BMA), we develop a regionally applicable lidar-based statistical model for Ponderosa pine and mixed conifer forest systems of the southwestern USA, using previously collected field data. The selected regional model includes a mid and low canopy height metric, a canopy cover, and height distribution term. It explains 72% of the variability in field estimates of AGB, and the RMSE of the two independent validation data sets are 23.25 and 32.82 Mg/ha. The regional model developed is structured in accordance with previously described models fit to local data, and performs equivalently to models designed for smaller scale application. Developing regional models for broad scale application provides a cost-effective, robust approach for managers to monitor and plan adaptively at the landscape scale.

Tropical forests harbor complex communities that are linked together by biotic relationships. Asian forests in particular have lost many apex predators due to habitat loss. We studied a small forest patch in northeastern Bangladesh, Satchari National Park, to determine density and diversity of nocturnal mammals and evaluate their relationships. Transects were walked from February 2015 to July 2016 and density was estimated using distance sampling. Nine species of mammals (5 arboreal and 4 ground-dwelling) were encountered. Densities of the common palm civets, Paradoxurus hermaphrodites, Bengal slow loris, Nycticebus bengalensis, were the highest (19.48 and 15.03 individuals/km2). Density of small Indian civets, large Indian civets and Indian mongoose were lower (2.31-5.55 individuals/km2). Unexpectedly, a wide range of nocturnal mammals co-existed in this forest patch, in spite of fragmentation and severe disturbance. We did not find any significant association between any of the species studied, although this could be an artifact of low sample size. Conservation in Bangladesh remains a challenge due to high human population density. Thus, strict conservation measures are needed to permit the long-term survival of these species.

Developed within the scope of a collaborative R&DT project, a 1 kW pilot unit aimed to perform the recovery of previously liquefied biomass from lignocellulosic forest resi-dues, later used as a carbon source in a co-electrolysis process, intended for the pro-duction of synthesis gas (H2, CO, CO2), also known as syngas. The syngas will be trans-formed into other value-added products, namely synthetic biofuels such as methane, methanol or biodiesel. This paper presents the results of the research currently being carried out at ISEL with the objective of further advancing development on the pilot unit by the execution of optimization tests with and without the addition of two dif-ferent biomass types.

In this report, we present a study demonstrating how machine learning methods can reveal the interaction of different risk factors of post-transplant leukemic relapse and obtain robust predictions even with a modest clinical dataset. Using a cohort of 63 pediatric patients with acute lymphocytic leukemia (ALL) and 46 patients with acute myeloid leukemia (AML) who underwent stem cell transplant at a single institution, we built predictive models of leukemic relapse with both pretransplant and posttransplant patient variables (specifically lineage-specific chimerism) using the random forest classifier. The random forest classifier revealed different important predictive factors between ALL and AML in our relapse models consistent with previous knowledge. Furthermore, it also distinguished donor CD34 chimerism as most impactful in relapse prediction compare to donor chimerism of other cellular lineages in our dataset for ALL but CD3 for AML. Our models greatly improved sensitivity and specificity at predicting relapses in cross validation compared to a reference model based on our own institutional incidence of relapse and inferential statistical principles. Local Interpretable Model-Agnostic Explanations, an interpretable machine learning tool, confirmed our Random Forest Classification result and provided an intuitive explanation of how our machine learning models made the relapse prediction for each individual patient.

Despite increased protection globally, climate change and other anthropogenic factors have caused a significant decline in seagrass cover. Identifying the specific causes of this decline is paramount if they are to be addressed. Therefore, we identified the causes of long-term change in seagrass/submerged aquatic vegetation (SAV) percentage cover and extent in the Bluefields Bay Special Fish Conservation Area (BBSFCA), a marine protected area on Jamaica’s southern coast. We used two random forest regression (RFr) models that included 2013 hydroacoustic survey SAV percentage cover data (dependent variable), and auxiliary data, reflectance data from level 2 processed 2013 Landsat 7 and 8 images and image band texture statistics maps (mean and variance) as predictors to generate 24 SAV percentage cover maps for the period 1984 – 2021 (37 years) using data from Landsat 4-5, 7 and 8 images., from which benthic features maps (SAV present, absent and coral reef) were created. Rainfall and map data were used to determine if SAV extent/area (km2) and average percentage cover and annual rainfall changed significantly over time and to evaluate the influence of rainfall. Rainfall impact on the overall spatial patterns of SAV loss, gain, and percentage cover change was assessed using a pixel-based regression. Finally, the most important spatial pattern predictors (two rainfall proxies (distance and direction from river mouth), benthic topography, depth, and hurricane exposure (a measure of hurricane disturbance)) of SAV loss, gain, and percentage cover change during 23 successive 1-to-4-year periods were identified using spatial Bayesian INLA generalized linear mixed models. SAV area/extent was largely stable with &gt; 70% mean percentage cover for multiple years. However, Hurricane Ivan (in 2004) caused a significant decline in SAV area/extent (by 1.62 km2, or a 13%) during 2002 – 2006 and a second hurricane (Dean) in 2007 delayed recovery until 2015. Additionally, rainfall declined significantly by &gt;1000 mm since 1901, and mean monthly rainfall positively influenced SAV percentage cover change. The pixel-based regression highlighted areas where mean monthly rainfall had a positive overall effect on SAV cover percentage change (across the entire bay) and gain (closer to the mouth of a river). The most frequently selected important spatial pattern predictors were the two rainfall proxies (areas closer to the river mouth were more likely to experience SAV loss and gain) and depth, with shallow areas generally having a higher probability of SAV loss and gain. Three hurricanes had significant but different impacts depending on their distance from the southern coastline. Hurricane Gilbert, which made landfall in 1988, resulted in higher SAV percentage cover loss in 1987 - 1988. Benthic locations with a northwestern/northern facing aspect (the predominant direction of Ivan’s leading edge wind bands) experienced higher SAV losses during 2002 – 2006. Although some locations impacted by Ivan and not by Dean recovered during 2006 – 2008, exposure to Ivan explained percentage cover loss during 2006 – 2008 and average exposure to (the cumulative impact of) Ivan and Dean (both with tracks close to the southern coastline) explained SAV loss during 2013 – 2015. Therefore, despite historic lows in annual rainfall, overall, higher rainfall was beneficial, multiple hurricanes impacted the site, and despite two hurricanes in three years SAV recovered within a decade. Hurricanes and a further reduction in rainfall may pose a serious threat to SAV persistence in the future.

Adaptations to climate change rely on understanding the dynamics of plant biomass stocks on the planet. The high levels of deforestation in Cerrado have transformed this biome into the second-largest Brazilian source of carbon emissions. The objective of this study was to develop a method to accurately estimate aboveground and total biomass values among shrublands, savannas, and forests located in the Cerrado biome, using an allometric equation adjusted from canopy height, obtained through optical and laser sensors. The results show similarity between the estimates employed by our method and the data found in the literature review for different phytophysiognomies in the Cerrado biome. Shrubland formations showed higher biomass estimation uncertainties due to the discontinuity of isolated trees and the lower canopy height when compared to more clustered tree canopies in savannas and taller canopies in forests. Aboveground biomass estimates were related to expansion factors, and specific maps were developed for each compartment by root, litter, and necromass. The sum of these compartments is presented in the aboveground and below forest biomass map. This study presents, for the first time, the mapping of total biomass in 10 m pixels of all regions of the Cerrado biome.

The use of hyperthermia is one of the effective methods of treating cancer. In this case, the problem arises of constructing and predicting the distribution of the thermal field inside tissues depending on their type. This paper discusses the use of linear and polynomial regression methods, as well as regression algorithms based on decision tree, random forest and K nearest neighbors methods to recover missing temperature values. The influence of the size of the training sample when performing regression on the quality of the reconstructed values is investigated. Experimental recommendations on sample size are given for the selected decision tree and random forest methods. The possibility of a significant (10 times or more) reduction in the initial sample size, without leading to a decrease in the R² metric by more than 0.05 for various tissues, has been shown.

Natural vegetation restoration has become an effective and rapid way for eco-logical restoration in fragile areas. However, the response of soil microorgan-isms remains unclear. Using high-throughput sequencing methods, we evalu-ated the dynamics of soil bacterial and fungal communities during forest suc-cession (shrubland, secondary forest, and primary forest) in the karst region of Southwest China. Secondary forest had significantly higher bacterial α-diversity than the shrubland and primary forest. Soil bacterial community in the primary forest was close to the shrubland but diverged from the secondary forest, and that the fungal community could be discriminated along forest suc-cession. Also, the microbial co-occurrence network indicated that soil fungi had less but more intense relationships than bacteria in the karst forests. Further-more, soil properties (pH, SOC, TN, moisture, and AK), soil microbial biomass (MBP, and MBN), and plant factors (Shannon index of woody plants) drove the dynamics of the soil bacterial community, while soil properties (i.e., pH) mostly explained the variation of the soil fungal community along karst forest succession. Different responses of soil bacteria and fungi to forest succession in a karst region give hints for ecological restoration along forest succession in the karst region.

UAVs are becoming a crucial tool in modern warfare, primarily due to their cost-effectiveness, risk reduction, and ability to perform a wider range of activities. The use of autonomous UAVs to conduct strike missions against highly valuable targets is the focus of this research. Due to developments in ledger technology, smart contracts, and machine learning, such activities formerly carried out by professionals or remotely flown UAVs are now feasible. Our study provides the first in-depth analysis of challenges and potential solutions for successful implementation of an autonomous UAV mission.

Landscape changes based on spectral responses allow showing plant cover changes through diversity, composition, and ecological connectivity. The spatial and temporal vegetation dynamics of the Bijagual Massif from 1986 to 2021 were analyzed as a measure of ecological integrity, conservation, and territory. The covers identified were high open forest (Hof), dense grassland of non-wooded mainland (Dgnm), a mosaic of pastures and crops (Mpc), lagoons (Lag), and bare and degraded lands (Bdl). The Bijagual Massif has 8,574.1 ha. In 1986, Dgnm occupied 42.6% of the total area, followed by Mpc (32.8%) and Hof (24.5%); by 2000, Mpc and Hof increased (43.7 and 28.1%, respectively), while Dgnm decreased (28%); by 2021, Dgnm was restricted to the northeastern zone and continued to decrease (25.2%), Mpc occupied 52.9%, Hof 21.7% and Bdl 0.1%. Of the three fractions of the connectivity probability index, only dPCintra and dPCflux contribute to ecological connectivity. Hof and Dgnm show patches with biota habitat quality and availability. Between 1986 and 2021, Dgnm lost 1,489 ha (41%) and Hof 239.5 ha (11%). Mpc replaced various covers (1,722.2 ha; 38%) in 2021. Bijagual has a valuable biodiversity potential limited by Mpc. Territorial planning and sustainable agroecological and ecotourism proposals are required due to the context of the ecosystems.

Keywords: Forest management; sustainability; FSC; PEFC; research; market share

The study sheds light on the impact of urbanization on fragile ecosystems such as the western Himalayas. We use Haldwani in Uttarakhand as an example of human encroachment and loss of ecosystem services. Several environmental parameters such as Nighttime light (NTL), Land Surface Temperatures (LSTs), Aerosol Optical Depth (AOD) and forest cover are used based on satellite imagery to allow a bidecadal comparison (between 2000 and 2020) of the status of these parameters for the city based on these parameters shows a decline in ecosystem services. Significant statistical differences for LSTs and AOD (p < 0.001) can be found in the bidecadal comparison. Furthermore, a strong negative correlation was found between LST-NDVI (r = -0.69) and between NTL-NDVI (r = -0.58) in earlier and last decade intervals. In addition, long-term multi-spectral satellite imagery also shows a decline in tree cover in the reserved forest. Therefore, focusing on ecosystem services related to tree cover in reserved forest areas, particularly in the Indian Himalayan Region (IHR) must be part of a broader action plan to address these issues to further protect fragile Himalayan ecosystems.

Affem Boussou community forest (AFC) abounds in important biological resources. This study, which contributes to its better management, examines the spatiotemporal dynamics of the vegetation and its ecological and structural characteristics to propose a zoning plan for the said forest. The analysis of the spatiotemporal dynamics of land use in the AFC from Google Earth images of 2015, 2018, and 2021 revealed a regressive trend of formations: crops and fallows (-33.98%), dense dry forests (-7.92%), gallery forests (-3.46%), plantations (-100%), grassy savannahs and meadows (-18.84%) except for tree/shrub savannahs (484.23%). The floristic inventory identified 163 species divided into 129 genera and 55 families. Fabaceae (14.02%), and Combretaceae (10.55%) are the most represented families. Anogeissus leiocarpa (5.19%) and Vitellaria paradoxa (4.72%) are the most frequent species. We note the dominance of individuals of small diameters. The regeneration potential of the AFC is 64 feet/ha due to 21 feet/ha of suckers, 29 feet/ha of seedlings, and 14 feet/ha of shoots. As a zoning plan, the AFC was subdivided into four series: the agroforestry zone (18.80%), the sustainable production forest zone (42.22%), the buffer zone (11%), and the biological conservation zone (28%). These results constitute a scientific basis for testing ecological indicators of sustainable management of community forests in Togo.

Soil enzyme activity can be affected by both production and degradation, as enzymes can be degraded by proteases. However, the impact of nutrient addition on enzyme activity is often solely attributed to changes in enzyme production without fully considering degradation. Here, we demonstrated that the activities of β-1,4-glucosidase (BG), β-D-cellobiohydrolase (CBH), β-1,4-Xylosidase (BX), and β-1,4-N-acetyl-glucosaminnidase (NAG) were comparable in nitrogen (N) and phosphorus (P) fertilized soils and the unfertilized control under field conditions, but the reduction in activity was substantially greater in the fertilized soils during short-term laboratory incubation. The results show that the interruption of the natural, continuous supply of organic matter or non-soil microbial-derived enzymes, which typically occurs under field conditions, leads to a more significant reduction in apparent enzyme activities in fertilized soils compared to unfertilized control. This may be attributed to the higher abundance of protease in fertilized soils, resulting in faster enzyme degradation. Interestingly, P fertilization alone did not have a similar effect, indicating that N fertilization is likely the main cause of the larger decreases in enzyme activity during incubation in fertilized soils compared to unfertilized control soils, despite our study site being poor in P and rich in N. These findings highlight the importance of considering enzyme degradation when investigating material dynamics in forest ecosystems, including the impact of nutrient addition on enzyme activity, as enzyme production alone may not fully explain changes in apparent enzyme activity.

The amino acid composition of the active site in an enzyme is influential on its substrate selectivity. For CYP2E1, the role of PHE residues in the formation of effective orientations for its activity toward aromatic substrates remains unclear. In this study, molecular docking and molecular dynamics analysis were performed toward the interactions between PHEs in the active site of human CYP2E1 and various aromatic compounds as confirmed CYP2E1 substrates. The results indicated that the orientation of 1-methylpyrene (1-MP) in the active site was highly modulated by the PHEs, PHE478 contributing to the binding free energy most significantly. Furthermore, by building a random forest model the relationship between each of 19 molecular descriptors of PCB congeners (from molecular docking, quantum mechanics, and physicochemical properties) and established human CYP2E1-dependent mutagenicity of a series of polychlorinated biphenyls (PCBs), which have been proven to be human carcinogens and endocrinal disrupters, was investigated. The presence of PHEs did not appear to significantly modify the electronic or structural feature of each bound ligand (PCB), instead, the flexibility of the molecular conformation of PHEs contributed substantially to the effective binding energy and orientation. It is supposed that PHE residues adjust their own conformation to permit a suitable space for the ligand binding and form an orientation favorable for a biochemical reaction. This study has provided some insights into the role of PHEs in guiding the interactive adaptation of the active site of human CYP2E1 for the binding and metabolism of aromatic substrates.

High PM10 concentrations are still a significant problem in many parts of the world. In many countries, including Poland, 50μg/m3 is the permissible threshold for a daily averaged PM10 concentration. The number of people affected by this threshold’s exceedance is challenging to estimate and requires high-resolution concentration maps. This paper presents an application of random forests for downscaling regional model air quality results. As policymakers and other end users are eager to receive a detailed resolution PM10 concentration maps, we propose a technique which utilizes the results of regional CTM (GEM-AQ, with 2.5km resolution) and local Gaussian plume model. As a result, we receive a detailed, 250-meter resolution PM10 distribution, which resembles the complex emission pattern in a foothill area in southern Poland. The random forest results are highly consistent with the GEM-AQ and observed concentration. We also discuss different strategies of data training random forest - using additional features and selecting target variables.

Successful fertilization treatments targeted to improve stand productivity while reducing operational complexities and cost depend on a clear understanding of soil nutrient availability under varying environmental conditions. Soil nutrient data collected from 154 forest sites throughout the Inland Northwest, USA were analyzed to examine soil nutrient characteristics on different geologic soil parent materials and to rank soil fertility. Results show that soil parent material explains significant differences in soil nutrient availability. Soils developed from volcanic rocks have the highest CEC and are relatively high in P, K, S, Mg, Cu, Ca, and B, but generally poor in N. Forest soils developed from plutonic rocks exhibit the lowest CEC and are low in N, S, K, Mg, Cu, and Ca, but higher in P. Some soils located on mixed glacial till are low only in K, Cu, Mg, and Ca, but many glacial soils are relatively rich in other nutrients, albeit the second lowest CEC. Soils developed from metasedimentary and sedimentary rocks are among those with lowest soil nutrient availability for P and B. Sulfur was found to have the highest concentrations in metasedimentary influenced soils and the least in sedimentary derived soils. Our results should be useful in designing site-specific fertilizer and nutrient management prescriptions for forest stands growing on soils developed from these major geologies within the Inland Northwest region of the United States.

Forest enterprise has been identified as a means of generating income among people; plays a vital role in enhancing the quality of life of forest-dependent people. Despite the opportunities timber marketing offers the people, the disparities in the income generation of the marketers in the Bodija sawn wood Market and the effect of socio-economic factors on income generation of the marketers is not well understood. This study was conducted to assess the socio-economic determinants of contributions of timber marketing to the income of timber merchants in Bodija sawn-wood Market. One hundred structured questionnaires were administered randomly in five zones of the sawn wood Market to obtain information on the socio-economic background of the sawn wood marketers and the contribution of timber trade to their incomes. The result indicated that 99.0% of the respondents were male while females constituted 1.00%. Seventy-five percent of the marketers had post-primary education and 25% had primary education. Two percent of the marketers had below 10 years of marketing experience, twenty-six percent had between 11 and 20 years, 57.00% had between 21 and 30 years, and 15.00% had more than 30years experience. Fifty-eight percent of the respondents earned between ₦10000-₦60000 (1US$ = 360.00) from timber marketing, thirty-one percent earned between ₦60001 and ₦110000, 7% earned between ₦110001 and ₦160000, while 4% earned above ₦160000 per month. Chi-square analysis of the socio-economic characteristics of the respondents and income generation at α level of 0.05 indicated that ethnicity (0.001) and years of experience (0.009) significantly influenced income while the level of education (0.101), age (0.122), and religion (0.745) had no significant influence on the incomes of marketers. Experience is an important factor in sawn wood marketing and a major determinant of the contribution of timber marketing to the income of timber marketers in Bodija sawn wood Market.

Forests are critical in regulating the world’s climate and they maintain overall Earth’s energy balance. The variability in forest canopy structure, topography and underneath vegetation background condition creates uncertainty in the estimation and modelling of Earth’s surface radiation particularly for boreal regions in high latitude. We studied seasonal variation in surface reflectance with respect to land cover classes, canopy structures, and topography in a boreal region of Alaska by fusing together Landsat 8 surface reflectance and LiDAR-derived canopy matrices. Our study shows that canopy structure and topography interplay and influence surface reflectance in a complex way particularly during the snow season. Topographic aspect and elevation control vegetation growth, type and structure. The southern slope is featured with more deciduous and taller trees having greater rugosity than the northern slope. Higher elevation is associated with taller trees for both vegetation types, particularly in the southern slope. In general, surface reflectance shows similar relationships with canopy cover, height and rugosity, mainly due to close relationships between these parameters. Surface reflectance decreases with canopy cover, tree height, and rugosity especially for evergreen forest. Deciduous forest shows larger variability of surface reflectance, particularly in March, mainly due to the mixing effect of snow and vegetation. The relationship between vegetation structure and surface reflectance is greatly impacted by topography. The negative relationship between elevation and surface reflectance may be due to taller and denser vegetation distribution in higher elevation. Surface reflectance in the southern slope is slightly larger than the northern slope for both deciduous and evergreen forest. The shadow effect from topography and tree crowns on surface reflectance play a different role for deciduous and evergreen forests. For deciduous forest, topographic shadow effect on surface reflectance is stronger than from tree shadowing in all seasons. For evergreen forest, shadow effects from topography and tree crowns on surface reflectance are both equally dominant, however tree shadow effect is more significant in March than in May and August. The generalized additive models (GAM) based on non-linear relationships between response (surface reflectance) and predictor (canopy structures and topography) variables confirms such observations. Our study not only provides accurate quantification of surface radiation budget but also helps in parametrization of climate change models.

Within the town, Abiotic is a built environment that includes buildings, roads, pedestrians, and other elements that interact with biotics, which are living things including plants, animals, and humans. From a landscape ecological perspective, the urban structure consists of (1) a matrix, which is a collection of dominant buildings and homogeneous elements, (2) Patches are grouped as housing, urban forests, parks, lakes, and finally (3) Corridors such as roads, rivers, and pedestrians. The dominance of watertight areas over green open spaces in urban development can lead to increased temperatures and runoff. The condition of the soil structure and the steep slope of the soil can cause landslides, therefore urban development must pay attention to the natural conditions of the area being built. This research was conducted in Kota Baru, Bogor, South Tangerang, and Cikarang (Bekasi Regency). The purpose of this study is to determine the natural environment and the built environment as well as changes in the ecosystem and their consequences for the new town and its surroundings. This research uses quantitative and qualitative approaches. Analysis of land-use change uses spatial and temporal methods, while Nieuwolt's equation is used to measure comfort. This study finds comfortable environmental planning, with green open spaces such as urban forests, city parks, and bodies of water, such as lakes, as a space for interaction between fellow new city residents and people outside the new towns.

Produced in many world’s countries at over 1 million tonne/year rate by extraction of certain woods and barks with boiling water, tannin is a class of high molecular weight biophenols increasingly used in a number of industries. This study offers a new bioeconomy insight into an old natural product that, we argument in this study, will play a crucial role in the development of the bioeconomy of forest regions. After providing an updated picture of key economic and production aspects, we show how flourishing research on tannin’s biological activity and technological applications has revealed many new properties which are likely to drive significant growth in demand in the near and mid-term future. The study concludes with selected recommendations for bioeconomy scholars and for policy-makers based in forest areas.

A botnical survey was conducted in Kaptai reserve forests under Rangamati district in Bangladesh to study the flora of Karnaphuli range from May 2015 to October 2018. The survey was accompanied by a collection of voucher specimens enumerates 464 plant species belonging to 334 genera under 117 families from the forest range. The survey has confirmed 31 threatened forest species from this area along with many near threatened plant species.

A botnical survey was conducted in Kaptai reserve forests under Rangamati district in Bangladesh to study the flora of Karnaphuli range from May 2015 to October 2018. The survey was accompanied by a collection of voucher specimens enumerates 464 plant species belonging to 334 genera under 117 families from the forest range. The survey has confirmed 31 threatened forest species from this area along with many near threatened plant species.

The European heatwave of 2018 led to record-breaking temperatures and extremely dry conditions in many parts of the continent resulting in widespread decrease in agricultural yield, early tree-leaf senescence, and increase in forest fires in Northern Europe. Our study aims to capture the impact of the 2018 European heatwave on terrestrial ecosystem through the lens of a high-resolution solar-induced fluorescence (SIF) data acquired from the Orbiting Carbon Observatory (OCO-2) satellite. SIF is proposed to be a direct proxy for gross primary productivity (GPP) and thus can be used to draw inferences about changes in photosynthetic activity in vegetation due to extreme events. We explore spatial and temporal SIF variation and anomaly during spring and summer months across different vegetation types (agriculture, broadleaved forest, coniferous forest, and mixed forest) during the European heatwave of 2018 and compare it to non-drought conditions (most of Southern Europe). About one-third of Europe’s land area experienced a consecutive spring and summer drought in 2018. Comparing 2018 to mean (2015-2017) conditions, we found a change in intra-spring season SIF dynamics for all vegetation types, with lower SIF during the start of spring followed by an increase in fluorescence from mid-April. Summer, however, showed a significant decrease in SIF. Our results show that particularly agricultural areas were severely affected by the hotter drought of 2018. Furthermore, the intense heat wave in Central Europe showed about 31% decrease in SIF values during July and August as compared to the mean over three previous years. Furthermore, our MODIS and OCO-2 comparative results indicate that especially for forests, OCO-2 SIF has a quicker response and possible higher sensitivity to drought in comparison to MODIS’s fPAR and NDVI when considering shorter reference periods, which highlights the added value of remotely sensed solar-induced fluorescence for studying the impact of drought on vegetation.

We propose a new estimator for creating expansion factors for survey plots in the USDA Forest Inventory and Analysis program. This is a regularized version of the raking estimator widely used in sample surveys. The regularized raking method differs from other predictive modeling methods for integrating survey and ancillary data in that it produces a single set of expansion factors that can have general purpose use to produce small area estimates and wall-to-wall maps of any plot characteristic. This method also differs from other more widely used survey techniques, such of GREG estimation, in that it is guaranteed to produce positive expansion factors. We extend the previous method here to include cross-validation, and provide a comparison to expansion factors between the regularized raking and ridge GREG survey calibration.

Background: Diabetes is among the most prevalent diseases worldwide, of all the affected individuals a significant proportion of the population remains undiagnosed because of a lack of specific symptoms early in this disorder and inadequate diagnostics. Diabetes and its associated sequela, i.e., comorbidity are associated with microvascular and macrovascular complications. As diabetes is characterized by an altered metabolism of key metabolites and regulatory pathways. Metabolic phenotyping can provide us with a better understanding of the unique set of regulatory perturbations that predispose to diabetes and its associated comorbidities. Methodology: The present study utilizes the analytical platform NMR spectroscopy coupled with Random Forest statistical analysis to identify the discriminatory metabolites of diabetes (DB) and diabetes-related comorbidity (DC) along with the healthy control (HC) subjects. A combined and pairwise analysis was performed, between the serum samples of HC (n=50), and DB (n=38), and DC (n=35) individuals to identify the discriminatory metabolites responsible for class separation. The perturbed metabolites were further rigorously validated using t-test, AUROC analysis to examine the statistical significance of the identified metabolites. Results: The DB and DC patients were well discriminated from HC. However, 15 metabolites were found to be significantly perturbed in DC patients compared to DB, the identified panel of metabolites are TCA cycle (succinate, citrate), methylamine metabolism (trimethylamine, methylamine, betaine), -intermediates; energy metabolites (glucose, lactate, pyruvate); and amino acids (valine, arginine, glutamate, methionine, proline and threonine). The metabolites were further used to identify the perturbed metabolic pathway and correlation of metabolites in DC patients. Conclusion: The 1H NMR metabolomics may prove a promising technique to differentiate and predict diabetes and its comorbidities on their onset or progression by determining the altered levels of the metabolites in serum.

In Africa, 80% of households in urban areas are food insecure and is coupled with a dramatically changing urban food culture towards increased consumption of sugary and fatty foods. Consequently, incidences of obesity and undernourishment in many African cities are becoming escalating. Urban and peri-urban forestry emerges as a complementary measure to contribute towards elimination of urban hunger and improved nutritional security. However, there is scanty knowledge about the composition, diversity and socioeconomic contributions of urban food trees in African cities and this hinders policy discussions integrating urban forestry into the food security discourse. This paper examines the diversity and composition of the urban forest and food trees of Accra and sheds light on perceptions of urbanites regarding food tree cultivation and availability in the city. Using a mixed methods approach, about 105 respondents in six neighbourhoods of Accra were interviewed while over 200 100-m2 plots were surveyed across five land use types. Twenty-two out of the 70 woody species in Accra are edible. The food tree abundance in the city is about half of the total number of trees enumerated. The species richness and abundance of the edible trees and all trees in the city were significantly different among land use types (p<0.0001) and neighbourhood types (p<0.0001). The diversity of food bearing tree species was much higher in the poorer neighbourhoods than in the wealthier neighbourhoods. Respondents in wealthier neighbourhoods indicated that tree and fruit tree cover of the city was generally low and showed greater interests in cultivating fruit trees and expanding urban forest cover than poorer neighbourhoods. These findings demonstrate the need for urban food policy reforms that integrate urban grown tree foods in the urban food system/culture.

Forest certification is considered a viable market-based policy instrument to promote forest sustainability. It has an important role of play in meeting the objective of modern forestry development in China, which is to sustain ecological and environmental benefits of forests. To understand differences in attitudes, opinions, and interests in forest certification, this study segmented respondents of a landowner’s survey in Shandong, China based on their level of interest in participating in forest certification under different program requirements. Multivariate cluster analysis revealed three distinct groups: likely-, potential-, and unlikely-landowners. We further examined the heterogeneity of these groups in terms of their demographics, ownership characteristics, management objectives, and perceived benefits and challenges with adopting forest certification. The results suggested the necessity of differentiating landowners in formulating and designing specific motivation-based incentives and tailor outreach efforts and communication strategies to improve their interests in forest certification. Findings are useful and interesting to forest policymakers interested in promoting forest certification among landowners in China and other countries facing similar circumstances.

Forest fire is a major ecological disaster, which has economic, social and environmental impacts on humans and also causes the loss of biodiversity. Forest officials issue the warnings to the public on the basis of fire danger index classes. There is no fire danger index for the country India due to the sparsely distributed meteorological stations. Previous studies suggest that Static Fire Danger Index (SFDI) as well as Dynamic Fire Danger Index (DFDI) have been derived from the satellite datasets. In this study, we have made an attempt to integrate both the Static and Dynamic fire danger indices and also used the Near Real Time (NRT) data sets that can be available for download through NASA FTP server after one hour of the satellite overpass. In this study, DFDI has been calculated from the MODIS Terra NRT Land Surface Temperature (MOD11_L2) and MODIS TERRA NRT surface reflectance MOD09. Finally, The Forest Fire Danger Index (FFDI) has been developed from the static and dynamic fire danger indices by the additive model and the overall accuracy was around 81.27%. Thus, the FFDI has been useful to predict the fire danger accurately and can be useful anywhere, where the meteorological stations are un-available.

Land use land cover change(LULCC) plays a significant role in understanding the global change. Particularly in regions with high population growth and climate change, anthropogenic activities have drastically altered land use and land cover (LULC). The geographic information system (GIS) and remote sensing are prominent tools for monitoring LULC changes. The land use land cover(LULC) analysis and carbon loss assessment were carried out in Ayubia national park. The area was classified into five major LULC classes, namely grassland, built-up areas, mixed forests, conifer forests and bare land. Landsat temporal satellite data of Ayubia national park acquired on 1992,2002,2012 and 2022 were analysed to access land use change and Markov’s Chain Model was used to predict the land use land cover changes for 2040. The accuracy of the images were assessed using Kappa matrix. Our results showed that a total of 371.94 ha forest land has been converted into other land uses from 1992 to 2022 and Indicating the increasing scale of anthropogenic pressure on forest resources of the Park. The carbon pool was assessed in two forest types including temperate coniferous forest and Mixed forest. The estimated carbon value recorded in TCF is 135.19 ±9.74 MgC ha-1, whereas it is in 86.43 ±8.25 MgC ha-1 in MF. Using satellite data, a thorough examination of the forest inventory was conducted to determine the LULCC, the rate of biomass carbon loss, and the factors that influenced these trends.

Climate analogues provide forestry practice empirical evidence of how forests are managed in “twin” regions, i.e. regions where the current climate is comparable to the expected future climate at a site of interest. But the uncertain future climate creates uncertainty in how to adapt the forests. We therefore investigate how the uncertainty in future climate affects tree species suitability and whether there is a common underlying pattern. Like most studies we employ different ensemble variants of RCP 4.5 and 8.5. But instead of focusing on a single point in future time, we resolve each variant in a climate trajectory from 2000 to 2100. We calculate climatic distances between the climate trajectories of our site of interest and the current climate in Europe, generating maps with twin regions from 2000 to 2100. Forest inventories from the twin regions allow us to trace the changes in the prevalence of 23 major tree species. We find that it is not the direction but rather the velocity of the change that differs between the scenarios. We use this pattern to propose a tree species suitability concept that integrates the uncertainty in future climate. Twin regions provide further information on silvicultural practices, pest management, product chains etc.

Forest carbon sequestration is a widely accepted natural climate solution, however, methods to determine net carbon offsets are limited to commercial carbon proxies and CO2 eddy covariance research. Non-CO2 greenhouse gases (GHG) (e.g., CH4, N2O) receive less attention in the context of forests, in part, due to emphasis on CO2 and the operational requirements and cost for three-gas eddy covariance platforms. In this study, Howland forest flux tower (CO2, CH4) and soil flux data (CO2, CH4, N2O), representing net emission reductions, are linked to their respective social costs to estimate commercial revenue if sold as a GHG social cost forest offset product (GHG-SCF). Estimated annual revenue for GHG-SCF products, applicable to realization of a Green New Deal, range from 120,000 covering the site area of 557 acres in 2021, to 12,000,000 for extrapolation to 40,000 acres in 2040, assuming a 3% discount rate. The Howland Forest CO2 flux record for two adjacent towers is compared to California Air Resources Board forest carbon proxy data for compliance sequestration offsets, the only project site where these approaches overlap. Overcrediting, incomplete carbon accounting with annual errors of up to 2,256%, inadequate third-party verification, and limited application to non-CO2 GHG’s are established. In contrast, direct measurement of one or more GHG’s offers new forest products and revenue incentives to restore and conserve forests worldwide.

This study aims to evaluate the potential of machine learning algorithms (Random Forest and Support Vector Machine) in predicting the open porosity of a general-use industrial mortar applied to different substrates based on the characteristics of both the mortar and substrates. For this purpose, an experimental database comprising 1592 samples of industrial mortar applied to five different substrates (hollowed ceramic brick, solid ceramic brick, concrete block, concrete slab, and lightweight concrete block) was generated by an experimental program. The samples were characterized by bulk density, open porosity, capillary water absorption coefficient, drying index, and compressive strength. This database was then used to train and test the machine learning algorithms to predict the open porosity of the mortar. The results indicate that it is possible to predict the open porosity of the mortar with good prediction accuracy and that both Random Forest (RF) and Support Vector Machine (SVM) algorithms (RF =0.880; SVM = 0.896) are suitable for this task. Regarding the main characteristics that influence the open porosity of the mortar, bulk density and the open porosity of the substrate are significant factors. Furthermore, the study employs a straightforward methodology with a machine learning no-code platform, enhancing the replicability of its findings for future research and practical implementations.

Linear programming models have been used in forest management planning since the 1960s. These models have been formulated in three basic ways: Models I, II, and III, which are defined by the sequences of management unit states represented by the variables. In Model I, variables represent sequences of states from the beginning of the planning horizon to the end. In Model II, variables represent sequences of states from one intervention to the next. Finally, in Model III, variables represent a single arc in a management unit’s decision tree, i.e., two states. The objectives of this paper are to clarify the definitions of these model variations and evaluate the advantages and disadvantages of each model. This second objective was achieved by formulating a case study problem using each model type. The case study includes three increasingly complex scenarios, each incorporating additional ecosystem services. Results show that despite having more variables and constraints, Model III requires the least time to formulate due to its less dense parameter matrix. Model II has the shortest solution times, followed closely by Model III, while Model I requires the longest times for both formulation and solution. These results are increasingly apparent in more complex scenarios.

Based on the land use data of Qingmei Harbor Mangrove Nature Reserve in Sanya, China, in 2009, 2015 and 2022, this paper utilizes the PLUS model to predict the land use changes in the region in 2035 under three development scenarios, namely natural development, urban construction and ecological protection. The results of the study show that the area of building land in this region increased rapidly from 2009-2015, and the corresponding cropland, parkland and arbor forest land as a whole showed a different degree of decline, while the expansion of the area of manmade land, such as building land, basically came to a standstill after 2015. However, the mangrove area in this region has maintained a stable growth trend from 2009-2022. The results of multi-scenario modeling of land in this region showed that the area of building land, unutilized land, and artificial land such as parkland and grassland increased the most under the urban development scenario. In the ecological protection scenario, the area of ecological land, such as arbor forest land and river and lagoon, increases significantly. However, there is no significant increase in the area of mangrove forests under any of the three development scenarios. At present, the task of “returning ponds to wetlands” has been basically completed in this area, and the space for large-scale expansion of mangrove forests in Qingmei Harbor is limited in the future, and the focus of subsequent work should be shifted to the enhancement of the quality and function of mangrove ecosystems.

Forest fires can occur suddenly and have significant environmental, economic, and social consequences. Timely and accurate evaluation and prediction of their progression, particularly the spread speed in difficult-to-access areas, are essential for emergency management departments to proactively implement prevention strategies and scientifically extinguish fires. This paper provides a comprehensive analysis of advanced technologies for predicting forest fire spread in China and globally. Incorporating remote sensing (RS) technology and forest fire science as the theoretical foundation, and utilizing the Wang Zhengfei forest fire spread model as the technical framework, this study constructs a forest fire spread model based on remote sensing interpretation. The model optimizes the method for acquiring parameters and enhances algorithm accuracy. By considering regional landforms (ridge lines, valley lines, slopes) and vegetation coverage, this paper establishes visual interpretation markers for identifying hotspots within the spread model. Utilizing statistical data from pixels within the fire line zone transforms the methodology for predicting forest fire spread speed, resulting in greater accuracy compared to conventional fixed-point predictions. Finally, the model was applied to the case of a forest fire in Mianning County, Sichuan Province, China and verified using high-time resolution mid-infrared image data and previous research findings. The results demonstrate that the predicted fire spread area from this RS-enabled model is consistent with both high-time resolution geostationary satellite data and previous research outcomes, indicating high reliability. This model can provide crucial fire spread information to relevant emergency departments, enabling effective preemptive measures and scientific firefighting strategies.

One of the main products of the forest, which has the greatest economic impact, is wood. Due to its characteristics, the wood requires certain types of vehicles for transport it. For this reason, the accessibility of the stands with forest roads plays significant role in the efficiency of the wood logging process, which aims to bring the wood from the forest to the harvesting area located, frequently, next to a permanent transport route. The process of wood transport from the forest initially takes place on forest roads and after that on public roads. The technological process of wood transport represents an important stage in this process, and its good organization can have implications on the final price of the wood material. Based on those mentioned above, the paper aims to highlight the factors that can influence productivity in the case of loading wood in forestry trucks and forestry platforms, in different conditions. Thus, the research was carried out in four counties in Romania and addressed the loading of wood in different forestry trucks and platforms, with or without trailers. Following the evaluation of the work phases specific to the process of round wood loading in vehicles of transport, it was found that sometimes a significant importance is given to the working phases that can be carried out before the loading process, as phases of preparation of the wooden material in order to load it. Also, the facilities of the transport vehicles, the assortments of wood material, as well as the experience of the operators are the main factors that can lead to an increase in productivity.

Wood quality has been an ongoing concern for specialists, which has become increasingly important in the current context, where the demand for wood is increasing and forest fires are more frequent and violent. The article aims to evaluate the quality of wood in trees affected by fires and the negative impact of these phenomena on the speed of wood degradation, as a result of the weakening of the trees due to the action of disturbing factors. Investigations were carried out using modern techniques on the beech trees (Fagus sylvatica L.) remaining in an area affected by a litter fire in 2017. Measurements were taken were made with the Arbotom Rinntech sound tomograph, the IML F-500 Resi resistograph and the Pressler core sampler to observe the quality of the wood inside the trunk. It was found that all the trees are in various stages of decaying the tomograms being able to highlight the severity of the defects only in the case of the total destruction of the wood structure as a result of the action of xylophages fungi, whose harmful influence is more pronounced when the injuries sustained by the trees from the fire were greater. Although the trees tried to close the fire wounds through their own defense mechanisms, the destructive action of the fungi intensified with the time.After the forest fires, for quickly and clear results regarding the internal quality of the wood could be used the resistograph. For valuable trees could be used the tomograph, but the measurements have to be taken only by qualified operators.

Since the 1960s, forest planners have used linear programming models to develop management plans for large, forested areas. Hundreds of academic papers have presented such models, incorporating multiple objectives, a growing diversity of management interventions, and uncertainty, among other things. Three basic ways to formulate these models have been used: Model I, III, and III. We define these models based on the sequence of management unit states represented by the variables. In Model I, variables represent a sequence of states from the beginning of the planning horizon to the end. In Model II, variables represent a sequence of states from one intervention to the next. Finally, in Model III, variables represent a single arc in a management unit’s decision tree, including only a beginning and an ending state. We formulate each type of model for a case study with three increasingly complex scenarios incorporating additional ecosystem services. Our results indicate that, despite requiring more variables and constraints, Model III requires the least time to formulate, largely because it has the least dense parameter matrix. Model II has the shortest solution times, with Model III close behind. Model I requires both the longest formulation and solution times.

By sinking and storing carbon from the atmosphere via photosynthesis, forests play a significant role in combating climate change. Global warming is currently the most pressing global issue. Forests play an important role in the global carbon cycle, covering 30% of the world's terrestrial land area and conserving 81% of the earth's terrestrial carbon biomass. The aim of the study was to quantify and map the Carbon Sink and Stock Values of the Yeraba state forest ecosystem. Primary and secondary data sources were used in this study. Primary data such as plot length and width, DBH (diameter at breast height), soil data, and ground control point (GCP) were obtained in the field using a Garmin 72 GPS, a clinometer, and a diameter tape. Diameter tape, caliper and Soil ogre materials. Beside from this sentimental 2 satellite image, there was also another important primary data. In addition to the primary data source, secondary data sources were used. It includes published books, journals and studies, reports, website sources, and other materials that are publicly available. The systematic sampling technique for identifying each intersection point in the area at regular intervals was the most appropriate sampling design for this study. The study used data from four forest carbon pools, including AGB, BGB, soil, and litter, to calculate the carbon sink and stock values of the Yeraba state forest ecosystem. A total of 17 quadrats, each measuring 20m x 20m and spaced 428 m apart, were used to collect vegetation data. For litter and soil sample collection, five 1 m x 1 m sub-quadrats were established at each quadrat's four corners and center. This data was correlated with five Sentinel 2A level 1c imagery data derived vegetation indices of 2023 to obtain a model and estimate of AGB and AGC at the study site. The total mean carbon stock density of Yeraba state Forest was 404.895 t/ha, with 223.656t/ha, 58.15t/ha, 3.41t/ha, and 119.679 t/ha in the above ground carbon, below ground carbon, litter carbon, and soil carbon pools, respectively. The three environmental factors that influence the distribution of different carbon pools in the forest are altitudinal gradient, slope, and aspect. Standing from the result and inputs the researcher recommended that, Future research may find that using LiDAR and Radar imageries, which can address the saturation and canopy penetration issues, will increase the accuracy of carbon stock estimation.

Climate change has altered the frequency and severity of extreme weather, which can affect vegetation condition and habitat quality for wildlife. Declines in vegetation productivity during droughts and heatwaves can negatively impact animals that depend on vegetation for water and nutrition. The ability to detect such effects on habitat suitability can reveal refugia, which can be prioritised for protection to improve threatened species conservation. We used the normalised difference vegetation index (NDVI) to look at relationships between vegetation productivity and the presence of koalas (Phascolarctos cinereus) in potential habitat throughout much of their range. Using a large, long-term koala presence dataset, we tested the hypothesis that locations where koalas had been observed would exhibit higher NDVI values than a random, representative sample from the same vegetation group (i.e. woodlands, open forests or tall open forests). We also identified the minimum NDVI threshold at which koalas occurred across time for each vegetation group and compared these to the minimum NDVI values observed across potential koala habitat before and during the millennium drought; one of the worst recorded in Australia. Additionally, we investigated whether vegetation above the minimum NDVI thresholds was significantly closer to perennial water than unsuitable vegetation. We found that koalas tend to occur at locations exhibiting higher NDVI than average for all vegetation groups. We also found that 49% of all vegetation groups maintained a minimum NDVI above the koalas’ NDVI threshold before drought, equating to 190,227 km2, which declined to 166,746 km2 during drought (a 12% reduction). We also found that unsuitable vegetation tended to occur farther from perennial water than suitable vegetation for some vegetation groups. Areas that remained above the NDVI thresholds during the drought should be considered potential refugia for populations during an event of similar magnitude and could indicate future core habitat extent.

Nitrogen is one of the most important macronutrients for crops, and in conjunction with artificial intelligence algorithms, it is possible to estimate it with the aid of vegetation indices through remote sensing. Various indices were calculated and those with a correlation ≥ 0.7 were selected for subsequent use in Random Forest, Gradient Boosting, and Artificial Neural Networks to determine their relationship with nitrogen levels measured in the laboratory. Random Forest showed no relationship, yielding an R2 of zero, whereas Artificial Neural Networks yielded the best results with an R2 of 0.93. Thus, it is reliable to estimate nitrogen levels using this algorithm by feeding it with data from TCARI, MCARI, TCARI/OSAVI, and MCARI/OSAVI, assisted by technological tools.

Forests are crucial natural resources in Indonesia, storing significant biodiversity and providing essential benefits for both the environment and people's livelihoods. They contribute significantly to the country's economy, support local communities, and play a vital role in mitigating climate change through carbon sequestration. This study examines the carbon storage valuation in tree forests of Telaga Warna National Park, Indonesia, highlighting the importance of preserving forests for carbon sequestration and climate resilience. The data was collected within a subplot measuring 10x10 meters, and for trees within a plot measuring 20x20 meters. The study focuses on pole and tree species. Based on the data obtained, it is found that the dominant vegetation in Telaga Warna National Park is Riung Anak / Casitanopsis javanica, with a potential carbon value of US$ 2.96 per Ha for pole species and US$ 98.49 for tree species.

Emerald ash borer (EAB), Agrilus planipennis, an invasive phloem-boring beetle, was detected in the Luhansk Region of Ukraine in 2019. In the following years, it expanded to a large part of the Kharkiv region and the parks of Kyiv. Previous research proved that the climate in Luhansk and neighboring regions is favorable for EAB, and the lack of a host plant (Fraxinus sp.) cannot prevent pest expansion in Ukraine. Considering the necessity to detect inhabited trees in time, our current research aimed to identify the most attractive EAB forest subcompartments considering forest site conditions and stand structure. MaxEnt model predicted the potential distribution of EAB with high accuracy (AUC = 0.842). The most significant five variables provided 82.9% to the model, particularly «Age of trees, years», «Area of forest subcompartment, ha», «Mean height of trees, m», «The proportion of Fraxinus excelsior in the stand composition, %», and «Hygrotope index (humidity level), point». A very high probability of EAB expansion in the Luhansk region (&gt;90 %) is predicted at 20 % of the forest area with Fraxinus sp. in the stand composition. The probability of EAB spread above 30% is predicted for 75 % of such area. To improve the forecasting accuracy, it could be necessary to consider the data on road localization along which the pest can spread passively, as well as dominate wind speed.

The current communication presents the application of a consolidated model combination strategy to analyze the medium-term carbon fluxes in two Mediterranean pine wood ecosystems. The modelling strategy is based on the use of a NDVI-driven parametric model, Modified C-Fix, and of a bio-geochemical model, BIOME-BGC, the outputs of which are combined taking into account the actual development phase of each ecosystem. The two pine ecosystems examined correspond to an old-growth forest and to a secondary succession after clearcuts, which differently respond to the same climatic condition during a ten-year period (2013-2022). Increasing dryness, in fact, exerts a fundamental role in controlling the gross primary and net ecosystem production of the mature stand, while the effect of forest regeneration is prevalent for the uprising of the same variables in the other stand. In particular, the simulated net carbon exchange fluctuates around 200 g C m-2 year-1 in the first stand and rises to over 600 g C m-2 year-1 in the second stand; correspondingly, the accumulation of new biomass is nearly undetectable in the former case while becomes notable in the latter. The study therefore supports the potential of the applied strategy for predicting the forest carbon balances consequent on diversified natural and human-induced factors.

Non-timber forest Products (NTFPs) are a broad category of natural resources harvested from forests that do not involve cutting down trees for their wood or timber. NTFPs play a vital role in the livelihoods and economies of many rural communities, particularly in forest-dependent regions. Despite the benefits obtained from NTFPS, little is known about its potential to alleviate poverty in the local communities. The objective of this review is to comprehensively assess the potential of NTFP's contribution to poverty reduction within forest fringe communities. The study employed the systematic review method to delve into the multifaceted relationship between NTFPs and poverty alleviation. We followed the preferred reporting items for systematic reviews and meta-analyses protocol (PRISM-P). In all, 58 research articles were reviewed. The results indicated that NTFPs hold significant promise as a tool for poverty alleviation. Globally, NTFPs have the potential to alleviate poverty and increase household incomes between 19% and 78% within forest fringe rural communities. In addition, the review indicated that countries in Africa and Asia depend highly on NTFPs and provide substantial amounts of income to the locals. However, the potential for NTFPs to reduce poverty is not uniform. It is highly contingent upon local ecological conditions, market accessibility, community involvement, and supporting policies and interventions. In conclusion, this systematic review demonstrates that NTFPs have a substantial role in poverty alleviation. This study underscores the need for continued research and targeted development initiatives to unlock the vast potential of NTFPs in addressing poverty challenges.

Honey has been employed for the treatment of wounds and diseases for ancient time, thanks to its antimicrobial and curative properties. This study aims to present the biochemical characteristics, including the amount of sugar, total phenols, phenolic chemicals, antioxidant properties, and antibacterial activities of a specific type of French honey (Sologne summer forest) in comparison with a manuka honey. According to our findings, the Manuka honey tested has 23% fewer polyphenols total than Sologne summer forest honey. The results showed that the Sologne summer honey had a different polyphenols profile than Manuka honey with specific polyphenol like p- Hydroxybenzoic acid. Additionally, the antioxidant activity of the two honeys is comparable (9 μmole Trolox.g-1 honey). Furthermore, the antibacterial activity of the two honeys is comparable against Pseudomonas aeruginosa and Staphylococcus aureus. Our research indicates for the first time that there are significant nutritional and biological potentials for a French honey from the Sologne summer forest.

The adoption of sustainable forest management practices emerged as a contemporary imperative for forest biodiversity preservation, functional integrity, and mitigation of climate change. Within the spectrum of these practices, thinning is recognized as an environmentally sustainable strategy. The primary objective of thinning is the equitable redistribution of aboveground growth, diverting resources from younger trees to promote the accelerated development of more valuable specimens compared to unthinned forests. Thinning, while fostering aboveground changes, induces substantial alterations in soil chemical and biochemical properties. This review addresses the often-debated consequences of thinning on soil characteristics, focusing on the intricate interplay involving different thinning intensities and their impact on soil chemical and biochemical parameters. Specifically, the analysis delves into the modulation of organic carbon levels, microbial biomass, and enzymes crucial to the organic matter cycle. Two key aspects are scrutinized: firstly, the influence of thinning intensity and the temporal dimension post-thinning on soil properties; secondly, the comparative impact of thinning intensity versus the time elapsed from the thinning event on soil properties and associated biological processes. The findings underscore pivotal insights: a) temporal dynamics significantly affect soil organic matter across broadleaved (excluding beech), coniferous, and mixed forests, manifesting as early as 2-7 years post-thinning; b) thinning intensity, up to a threshold of 50%, enhances soil quality by augmenting organic carbon content, bolstering microbial communities, and amplifying associated enzyme activities. This review consolidates valuable information for forest managers, providing guidance to optimize natural processes in tandem with achieving specific management objectives. By illuminating the nuanced interactions between thinning practices and soil dynamics, this knowledge equips stakeholders to make informed decisions in the pursuit of sustainable forest management and ecological resilience.

Forest management aims to preserve ecosystem integrity, maintaining resilience thresholds. For this, conservation and invasion patterns must be determined in managed landscapes. The objective was to identify proxies (landscape and environmental patterns) that allowed the plant species invasion and define thresholds of human impacts to improve management practices. We also want to identify indicator species for the different kinds of impacts and environments. 165 plots were measured in Nothofagus antarctica forests and associated open-lands (dry and wet grasslands) in Tierra del Fuego (Argentina). We found differences in the studied variables across landscape and among different uses and impact types. Human impacts influenced over land types, emphasizing the importance of managing intensities. Indicator plant species allowed to identify potential ecological thresholds related to human impacts and the establishment of species linked to ecological and economic degradation, e.g. Bolax gummifera and Azorella trifurcata were associated with high grazing pressure in grasslands and fire in forested areas, while Rumex acetosella and Achillea millefolium, typically associated with forested areas, were related to high harvesting pressure and fire impacts. These findings contribute to understanding the long-term effects of some impacts, and allow us to define variables of monitoring and indicator species for each impact type.

Predicting nurse turnover is a growing challenge within the healthcare sector, profoundly impacting healthcare quality and the nursing profession. This study employs the Synthetic Minority Over-sampling Technique (SMOTE) to address class imbalance issues in the 2018 National Sample Survey of Registered Nurses (NSSRN) dataset and predict nurse turnover using machine learning (ML) algorithms. Four ML algorithms, namely logistic regression (LR), random forests (RF), decision tree (DT), and extreme gradient boosting (XGBoost), are applied to the SMOTE-enhanced dataset. The data is randomly split into an 80% training set and a 20% validation set. Eighteen carefully selected variables from the NSSRN database serve as predictive features, and the machine learning model identifies feature importance concerning nurse turnover. The study includes a performance comparison based on metrics such as Accuracy, Precision, Recall (Sensitivity), F1-score, and AUC. In summary, the results demonstrate that SMOTE-enhanced random forests (SMOTE_RT) exhibit the most robust predictive power, both in the classical approach (with all 18 predictive variables) and an optimized approach (utilizing eight key predictive variables). XGBoost, decision tree, and logistic regression follow in performance. Notably, age emerges as the most influential factor in nurse turnover, with working hours, EHR/EMR usability, individual income, and region also playing significant roles. This research offers valuable insights for healthcare researchers and stakeholders, aiding in selecting suitable ML algorithms for nurse turnover prediction.

CO2 flooding stands as a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in its oil recovery, yet a comprehensive quantitative analysis remains an area in need of refinement. In this study, we have developed 1D and 2D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly-miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns are determined. A novel approach of the contour area calculation method is introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding geological parameters, oil viscosity, and injection-production parameters. Furthermore, the Random Forest (RF) algorithm is employed to identify the controlling factor of the sweep coefficient, as determined by out-of-bag (OOB) data displacement analysis. The results show that the miscible front is located at the point of maximum CO2 content in the oil phase. The immiscible front occurs at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moves at a faster rate compared to the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impact the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibits the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio is a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection-production parameters also play a pivotal role in sweep coefficient. Decreased well spacing and increased gas injection rates are found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates can improve the miscibility degree of partly-miscible flooding from 0.69 to 1.0. Oil viscosity proves to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly-miscible flooding patterns. Conversely, gravity segregation primarily governs the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerges as a paramount influence, with a factor importance value (FI) reaching 1.04. these results provide a theoretical foundation for the application of CO2 flooding, enhancing the understanding of the critical factors governing its success.

Amid urgent global climate and biodiversity crises, the strategic restoration of degraded forests stands as a vital countermeasure. This study pioneers a novel approach for the identification and prioritization of potential degraded forest areas suitable for restoration (PDFR), utilizing the advancements in Earth observation data. Utilizing Landsat data within the Google Earth Engine, our PDFR method applies a nuanced, phenology-based threshold classification to accurately map forest covers at a 30-m resolution, distinguishing prime restoration areas such as evergreen, semi-evergreen, deciduous, and flooded forests, and categorizing them into varying levels of degradation using Siem Reap, a province in Cambodia as a case study. The projections indicate a promising potential for carbon sequestration through restoration of the critically (~96,693 ha), highly (48,878 ha), moderately (46,487 ha), and slightly degraded (75,567 ha) forests, estimating a capture of 193.73 TgCO2 in Siem Reap from 2021 to 2030 upon comprehensive restoration initiatives. As Earth observation technologies continue to evolve, the PDFR method emerges as a strategic blueprint for data-driven policy formulation, fostering sustainable forest management and aligning with the global commitments delineated in the Glasgow Forests Declaration for 2030.

Increasing evidence supports the direct healing effects of forests, partly attributed to the exposure to plant-emitted monoterpenes available in the forest atmosphere. The potential benefits on respiratory functions from inhaling monoterpenes have gained attention, especially due to the global rise in respiratory diseases. This study involved 42 asthmatic adolescents attending a summer rehabilitation camp at an Altitude Pediatric Asthma Center within a densely forested area in the Eastern Italian Alps. Volatile organic compound measurements indicated a pristine atmosphere, enabling modeling of continuous hourly monoterpenes concentration. Monoterpene concentration exposure and total inhaled dose were assessed over a 14-day stay, during which spirometry, lung oscillometry, and fractional exhaled nitric oxide were measured. Statistically significant correlations were observed between modifications in lung function parameters among asthmatic adolescents and monoterpenes exposure. These findings suggest a potential localized airway effect specific to monoterpenes. This pilot cohort study might pave the way for further investigations into the therapeutic effects of forest monoterpenes on lung function tests, asthma, and the broader healing potential of forest environments.

The flat terrain in plain areas makes the land easily accessible for cultivation and farming, providing vast opportunities for agricultural development. Additionally, these areas are crucial for urban construction and economic growth. Soil mapping plays a crucial role in understanding soil characteristics and guiding land management practices. However, accurately mapping soils in plain regions can be challenging due to their low spatial variability and diverse land use types. This study focuses on the impact of land cover changes on the accuracy of soil mapping in plain areas, aiming to provide effective assistance in soil mapping through the analysis of their coupling relationship. Starting with a 20-year land cover change analysis, this study utilizes a unified approach that combines expert knowledge, mixed sampling methods, and random forest mapping techniques. The study incorporates environmental covariates that have minimal period influence and synergistically use NDVI (Normalized Difference Vegetation Index) and land cover data from the same year. The analysis is based on transition matrices, confusion matrices, and their derived indicators. The research findings indicate that Tongzhou District has experienced rapid development over the past 20 years, with the area of construction land nearly doubling. 29% of arable land has been converted into construction land, resulting in an increase in the accuracy of the soil map from 58.99% to 66.91% over the 20-year period. The soil change area during this period accounts for 16.5% of the total area, with 51.9% of the changed areas overlapping with land cover change areas. These overlapping regions are predominantly influenced by human activities. In terms of cultivated land types in the study area, the quantity of arable land has decreased by approximately 29% over the 20 years, while the proportion of sandy loam calcareous fluvo-aquic soil and light loam calcareous fluvo-aquic soil, which constitute nearly half of the soil types, has increased. These data demonstrate the coupling relationship between land cover changes and soil type variations, particularly the significant influence of human activities on soil structure. It is evident that on one hand, improving the extent of land use in plain areas enhances the credibility of soil mapping. On the other hand, human activities impact land cover, which in turn affects and reflects changes in the soil.

Agroforestry with a sustainable model of production is considered to be an effective solution to the unsustainability of the existing model in agricultural production, and it is also an important topic for ecosystem services and sustainable development goals to improve human well-being. In addition, existing literatures confirm that the importance of forest functions in increasing agricultural production and maintaining agro-ecological sustainability. The "rice-fish-duck-forest" is an important representative of the agroforestry complex ecosystem because of its unique management mechanism and characteristic social culture. As a result, "rice-fish-duck-forest" ecosystem services are beginning to be studied. In the absence of a systematic scientific understanding of the ecosystem services of "rice-fish-duck-forest", there are potential challenges to its sustainable development. This study thoroughly analyzed the current literature on rice-fish-duck-forest ecosystem services in order to have a more thorough grasp of it and to be more sustainable. This research found that research on the ecosystem services of "rice-fish-duck-forest" involves four themes: "regulational", "ecology", "economy", and "socio-culture". Deforestation, socio-cultural marginalization, and Low community management participation are the three main issues facing the "rice-fish-duck-forest" ecosystem service. To address these issues, this paper builds a framework for the sustainable development of rice-fish-duck-forest ecosystem services within the context of current management frameworks for agriculture and forestry, and further discusses its relevance to the Sustainable Development Goals. This study will provide a theoretical decision-making guide for the transformation of agriculture to agroforestry and the sustainable development of agroforestry.

In the overall context of national eco-conservation civilization development and considering the hills in the Beijing-Tianjin-Hebei-Shanxi region, the local forest coverage rate is gradually on the rise, and so is the risk of forest fire. Every year, satellites can monitor and detect hundreds of fire spots on average. In recent years, serious fire took place for several times, leading to loss of life and personal injury. Then the fire-fighting work consumed huge amount of labor and material resources, exerting negative social impacts in many ways. Thus, the analysis of fire climate background in this region and the forecast based on fire weather indexes constitute an important part in the forest fire risk management. Located in the tropical monsoon climate zone, four provinces and municipalities of Beijing, Tianjin, Hebei and Shanxi are similar in terms of climate characteristics. This study tries to analyze the characteristics about fire spots under satellite monitoring, fire climate and fire weather index. The probability distribution analysis of weather index about fire spots in history and key meteorological observation stations as well as the weather index analysis in the early stage of typical fire indicate that the Fine Fuel Moisture Content (FFMC) and the Initial Spread Index (ISI) in the Fire Weather Index (FWI) system is applicable to the fire risk analysis in the Beijing-Tianjin-Hebei-Shanxi region, which can also effectively indicate the fuel moisture and spread conditions. As regards to the average level in Beijing-Tianjin-Hebei-Shanxi, when the FFMC is smaller than 93.5 and the ISI is also smaller than 5.0, there is a low risk of fire; when the FFMC is above 94 and the ISI is larger than 10.0, there is a high risk of fire; and the fire risk will be extremely high if the FFMC is over 96 and the ISI is above 13.0. In the practical fire-fighting management, the fire danger class can be released in reference to the ISI classes and threshold values of key meteorological observation stations under analysis provided by this study.

The rising global population amidst the growing concerns of climate change will have a dire consequence on global food security and socio-economic activities. Wheat is one of the most important staple foods consumed by more than four billion people in the world, but climate change impacts account for a decline of 5.5% in wheat yield and predictions indicate that the production could further dwindle by nearly 30% in 2050, due to trends in temperature, precipitation, and carbon dioxide. An effective annual crop estimate is necessary not only to inform government the status of national food security, but also is used to determine the benchmark on which agricultural commodities are priced in the market. Thus, annual crop monitoring and yield estimate is paramount to determine the amount of wheat imports required to make up for the shortfalls in the national wheat production in South Africa, which has been a net importer of wheat since 1998. A joint project between South Africa and Poland investigated satellite based-crop growth monitoring using Sentinel 2 and determined the most distinguishable crop phenology for an accurate winter wheat classification during the growing season from August – December with Random Forest (RF) algorithm. The winter wheat crop was more accurately identified during the crop ‘heading’ stage in October yielding the highest user’s (75.56%) and producer’s (92.52%) accuracies, despite the relatively lower overall accuracy (78.14%) compared to that of December with OA of 83.58% obtained during the maturity stage. This study, therefore, confirms the suitability of sentinel 2 for an effective phenology-based winter wheat crop classification during the heading stage, reducing the ambiguity of spectral confusion created with surrounding grass and maize crops.

Commercial banks usually classify customers according to their credit reports when making loans. In this study, we put our focus on classifying customers based on their credit reports from the People's Bank of China (PBC). Since there are no target labels of users in the credit report of the People's Bank of China, we put forward the fuzzy clustering method for the initial label, and then Construct ant colony search to optimize intelligent recognition. Finally, this study uses SVM, BP neural network, and random forest to classify users and compare their results. The research re-sults indicate that using ant colony clustering algorithm and random forest for classification is the most effective method with the PBC credit reports.

This study assessed the periodic fluctuations among microbial biomass Carbon (C), Nitrogen (N) and Phosphorus (P), and the consequences of variations in altitude and abiotic factors on the soil microbial biomass (C, N and P) in a temperate mixed-oak pine forest of Central Himalaya. This research was directed at three forest stands along an altitudinal gradient. Samples were collected in triplicates, seasonally from each selected site and microbial C, N and P were determined through the fumigation extraction method. Microbial biomass C, N and P decreased significantly (P<0.01, correlation coefficient -0.985, -0.963, -0.948, respectively) with increasing altitude, while the rainy season showed the highest values, and winter season revealed the least values. Microbial biomass C, N and P showed positive correlation with silt particles, water holding capacity, bulk density, porosity, soil moisture, organic C, total N and P, and negative correlations with sand particles and soil pH. The microbial biomass C showed strong associations with soil microbial N (r=0.80, P<0.01) and P (r=0.89, P<0.01) contents, while the soil microbial biomass N and P also showed strong positive correlation (r=0.92, P< 0.01). Soil microbial biomass was greatly influenced by the altitude and abiotic variables whereas, weakly by temporal variation. The microbial C: N ratio indicated that fertility of soil is influenced by the species assemblage. Our findings suggest that high microbial biomass and low C: N ratio during rainy season could be considered as a strategy to conserve nutrients by temperate mixed-oak pine forest ecosystem.

Background/Objectives: Accurate prediction of stock prices is an extremely challenging task because of factors such as political conditions, global economy, unexpected events, market anomalies, and relevant companies’ features. In this work, the random forest has been used to forecast the prices of the four major Greek systemic banks Methods/Analysis: We make use of a set of financial variables based on intraday data: (i) Open stock price, (ii) High stock price, (iii) Low stock price, and (iv) Close stock price of a particular Greek systemic bank. Results/Findings: The variables used here are crucial in predicting systemic banks' stock closing prices. These provide a better prediction of the next day's closing price of the bank series. Novelty /Improvement: To our knowledge, this is the first study that employs machine learning techniques in Greek systemic banks.

The use of machine learning techniques to predict yield based on remote sensing is a no-return path and studies conducted on farm aim to help rural producers in decision-making. Thus, commercial fields equipped with technologies in Mato Grosso, Brazil, were monitored by satellite images to predict cotton yield using supervised learning techniques. The objective of this research was to identify how early in the growing season, which vegetation indices and which machine learning algorithms are best to predict cotton yield at the farm level. For that, we went through the following steps: 1) We observed the yield in 398 ha (3 fields) and eight vegetation indices (VI) were calculated on five dates during the growing season. 2) Scenarios were created to facilitate the analysis and interpretation of results: Scenario 1: All Data (8 indices on 5 dates = 40 inputs) and Scenario 2: best variable selected by Stepwise regression (1 input). 3) In the search for the best algorithm, hyperparameter adjustments, calibrations and tests using machine learning were performed to predict yield and performances were evaluated. Scenario 1 had the best metrics in all fields of study, and the Multilayer Perceptron (MLP) and Random Forest (RF) algorithms showed the best performances with adjusted R2 of 47% and RMSE of only 0.24 t ha^-1, however, in this scenario all predictive inputs that were generated throughout the growing season (approx. 180 days) are needed, so we optimized the prediction and tested only the best VI in each field, and found that among the eight VIs, the Simple Ratio (SR), driven by the K-Nearest Neighbor (KNN) algorithm predicts with 0.26 and 0.28 t ha^-1 of RMSE and 5.20% MAPE, anticipating the cotton yield with low error by ±143 days, and with important aspect of requiring less computational demand in the generation of the prediction when compared to MLP and RF, for example, enabling its use as a technique that helps predict cotton yield, resulting in time savings for planning, whether in marketing or in crop management strategies.

Biofertilizer, an environment-friendly and renewable plant nutrient source, has been widely applied and studied to reduce dependency on chemical fertilizers. However, most studies focus on the effects of biofertilizer on the bacterial and fungal communities, and we still lack an understanding of biofertilizer on the protistan community. Here, the effects of biofertilizer application on the composition and interaction of the protistan community in the wheat rhizosphere were investigated based on a 4-year field experiment. Biofertilizer application altered soil physicochemical properties and the protistan community composition (ANOSIM, p &lt; 0.001), and significantly induced an alpha diversity decline. Random forecast and redundancy analysis demonstrated that nitrogenase activity and available phosphorus were the main drivers. Trichomonas classified to the phylum Metamonada was enriched by biofertilizer, and was significantly positive connections with soil nitrogenase activity and some function genes involved in nitrogen-fixation and nitrogen-dissimilation. Biofertilization loosely connected biotic interactions, while did not affect the stability of the protistan community. Besides, biofertilizer promoted the connections of protists with fungi, bacteria, and archaea. Combined with the conjunct biotic network (protist, fungi, bacteria, and archaea) and interactions between protists and soil physicochemical properties/function genes, protists may act as keystone taxa potentially driving soil microbiome composition and function.

Remote sensing/GIS techniques are a versatile tool for x-raying serial forest structural changes in retrospect. It would be impossible to evaluate past occurrences and changes in forest extents in past decades at Effan Forest Reserve without non-conventional means. Therefore, we adopted remote sensing technology using Landsat images to evaluate land-use change and degradation rates in the area with a view to ascertaining causal factors for possible minimization of forest degradation in Effan Forest Reserve. Land-use/land-cover changes were analyzed using USGS-Landsat TM and ETM images of 1987, 2002, 2014 and 2019. Field-data were collected using handheld GPS receiver and spatial statistical analyses were conducted using the ground control points (GCPs). For inventory data, a systematic sampling technique was adopted using ten 1.05 km-transects at 500 m intervals. A total of 50 sample plots of 50 × 50 m were used. All tree species with Dbh ≥10 cm were enumerated. Nineteen tree species in ten families were encountered with Vitellaria paradoxa as the most-frequently occurring species in the area. IUCN-listed endangered Pterocarpus erinaceus, hitherto abundant in the area, was rarely encountered during the survey, while Vitellaria paradoxa is gradually shrinking, going the relative abundance in the area. The result further showed that primary and secondary forests decreased considerably by 258.03 ha (46.72%) and 9.18 ha (3.63%), respectively, with a total forest loss of 50.3% in 32 years (8.4 hayr-1, 1.6% per annum). While forest plantation size doubled by 369.72 ha within the period. This is worrisome as the remaining fragmented forests appeared to be on the decline, except the riparian vegetation, due to inaccessibility to the riparian by loggers. It thus appeared that forest protection approaches were ineffective. Increased protection efforts could save this forest reserve, and the concerned authority should consider a focused-enrichment planting involving indigenous species for ecosystem-repair.

The carbon stocks in the forests originated from the atmosphere and are accumulated in the organic matter of trees and soils. Forests play major roles in providing ecosystem services like climate change mitigation through carbon sequestration and nutrient flow dynamics. Therefore, the major objective of this study was to estimate carbon stocks of Biteyu forest by quantifying the aboveground biomass of trees, belowground carbon, soil carbon, and carbon stocks of litter pool. Systematic sampling technique was employed for vegetation and carbon data collection. The total of 10 line transects were laid along elevational gradients. The transects were 500 m apart and sampling plots were 300 m apart from each other. Each transect has comprised of a minimum of 4 plots to a maximum of six totaling 50 plots representing the forest for the investigation. A square sample plot of 900 m2 was used to collect vegetation data with a DBH ≥ 2.5 cm and a height of 2 m and above. To sample herbaceous vegetation in the forest floor, five smaller subplots of 1 m x 1 m = 1 m2 (four at the corner and one at the centre of the main plot) were established. The disturbance level was also determined using the cattle interference and selective cutting of trees. The appropriate allometric models were applied for both aboveground and belowground biomass estimations. The findings showed that cattle interference affects the forest understory from growing and recruitment. The mean of cattle interference was 4.77±2.12 per ha and the mean of wood stump was 26.67±9.37 per ha. The size class analysis showed that the smallest diameter class (2.5-10 cm) in the forests represented 37.05% of the total stem density. The diameter classes between 10 and 30 cm comprised a stem density of 41.08%. It was estimated that the total carbon stock of Biteyu forest was about 166.67 ± 16.4 ha-1. The carbon stock in AGB and BGB was estimated to be 87.13 ± 11.80 t ha-1 and 22.94 ± 2.84 t ha-1, respectively. Moreover, the contribution of soil and litter carbon pools to the total carbon in the forest ecosystem were 56.37 ± 1.73 and 0.26 ± 0.01 t ha-1 , respectively. From the present study it can be concluded that estimated mean carbon stock of the forest is smaller than that of other similar forests in the dry evergreen montane forest, which was attributed to the higher anthropogenic disturbances. Therefore, the interventions, which reduce the climate change effect, would be very important in the maintenance of forest ecosystem functioning.

Exploring the effect of the sample size on the estimation accuracy of airborne LiDAR forest attributes in a large-scale area can help in optimizing the technical application scheme of operational ALS-based large-scale forest stand inventories. In our study, sample datasets composed of different sample plots were constructed by repeated sampling from 1003 sample plots in a subtropical study area covering 2376 × 103 km2. Sixteen multiplicative power models were built in each forest type consisting of four forest attributes. Through these models, the variations of standard deviation (SD) and coefficient of variation (CV) of R2 and rRMSE of forest attribute estimation models for different quantity levels of sample plots were also analyzed. The results showed that, first, when the sample size increased from 30 to the top limit, the SD of the forest attributes and LiDAR variables showed a decreasing trend. Second, as the sample size increased, the rRMSE of the 16 forest attribute estimation models gradually decreased, while the R2 gradually increased. Third, when the sample size was small, both the SD of R2 and rRMSE of the models were large, and the SD of R2 and rRMSE gradually decreased as the sample size increased. In 50 models conducted for each attribute at the same sample size, for the mean standard deviations of forest attributes, the ten best performing models were lower than those of the total 50 models, and the worst ten models were the opposite. When the sample size increased, the accuracy of each forest attribute estimation model for each forest type gradually improved. The variation of forest attributes and the LiDAR variable of the construction model are critical factors that affect the model’s accuracy. To efficiently apply airborne LiDAR in order to survey large-scale subtropical forest resources, the sample size of the Chinese fir forest, pine forest, eucalyptus forest, and broad-leaved forest should be 110, 80, 85, and 70, respectively.

Capirona (Calycophyllum spruceanum Benth) is a tree species of commercial importance widely distributed in South American forests and is traditionally used for its medicinal properties and wood quality. Studies on this tree species have been focused mainly on wood properties, propagation and growth. Genetic studies on capirona are very limited to date. Today it is possible to explore genetic diversity and population structure in a fast and reliable manner by using molecular markers. We here used 10 Random Amplified Polymorphic DNAs (RAPDs) markers to analyze genetic diversity and population structure of 59 samples of capirona that were sampled from four provinces located in the eastern region of the Peruvian amazon. A total of 186 bands were manually scored, generating a 59 x 186 presence/absence matrix. We used R software to calculate genetic distances based on provesti coefficient. A dendrogram was generated using the UPGMA clustering algorithm and showed four groups that correspond to the geographic origin of the capirona samples. Similarly, a discriminant analysis of principal components (DAPC) confirmed that capirona is grouped into four clusters. However, we also noticed few accessions are intermingled. Genetic diversity estimation was conducted considering the four groups (populations) identified by adegenet package in R. Nei's genetic diversity estimate varied from 0.26 to 0.39 and Shannon index ranged from 2.48 to 2.83. AMOVA analysis revealed the greatest variation exist within populations (69.7%) and indicated that variability among populations is 31.5%. To our best knowledge, this is the first investigation employing molecular markers in capirona in Peru considering their natural distribution, and sheds light towards its modern genetic improvement and for the sustainable management of forests in Peru.

The evaluation of deforestation by optical remote sensing remains a challenge in the humid tropical region due to high cloud cover. This paper develops a simple and reproducible method for mapping deforestation of the old-growth forest using open access software. A map of old-growth forest depletion was created using composites from three different dates (2003, 2010, 2016). Four models were tested: the first model using spectral bands (nir, swir1, swir2 and red), the second model was based on the association of spectral bands and spectral indices (NDVI, B54R, NDWI and NBR), the third model was constructed using spectral bands and geomorphological indices (DEM, Slope and Roughness) and the last model combined spectral bands, spectral indices and geomorphological indices. The optimal random forest ntrees and Mtry parameters were determined for each model to optimize the mapping in each model. The out-of-bag error for these four models was 2.15 %, 2.05 %, 1.86 % and 1.85 %, respectively. The fourth model had the lowest error and was hence used to predict deforestation of the old-growth forest. The annual rates of deforestation amounted 0.26 % (69861 ha) and 0.66 % (145768 ha) between 2003 – 2010 and 2010 – 2016, respectively. The area of the old-growth forest in 2016 was 3601607 ha and 215629 ha of forest lost between 2003 and 2016. These results showed that the Random Forest Classification (RFC) model was able to effectively map the reduction of old-growth forests.

Amplitude modulation (AM) is a characteristic feature of wind farm noise and has the potential to contribute to annoyance and sleep disturbance. This study aimed to develop an AM detection method using a random forest approach. The method was developed and validated on 6,000 10-second samples of wind farm noise manually classified by a scorer via a listening experiment. Comparison between the random forest method and other widely-used methods showed that the proposed method consistently demonstrated superior performance. This study also found that a combination of low-frequency content features and other unique characteristics of wind farm noise play an important role in enhancing AM detection performance. Taken together, these findings support that using machine learning-based detection of AM is well suited and effective for in-depth exploration of large wind farm noise data sets for potential legislative and research purposes.

Taking a typical forest underlying surface as the research area, this study employed the unmanned aerial vehicle (UAV) photogrammetry to explore more accurate canopy parameters including tree height and canopy radius, which were used to improve the Noah-MP land surface model conducted in Dinghushan Forest Ecosystem Research Station (CN-Din). While the canopy radius was fitted as a Burr distribution, the canopy height of CN-Din forest followed a Weibull distribution. The replacement of the parameters by these observed UAV would result in the Noah-MP model. It was found that the influence on the simulation of the energy fluxes could not be negligible, and the main influence of these canopy parameters was on the latent heat flux which could decrease up to -11% in the midday while increase up to 15% in the nighttime. Additionally, this work indicated that the description of the canopy characteristics for the land surface model should be improved to accurately deliver the heterogeneity for the underlying surface.

Rural households across developing countries rely on diversified sources of income and forest resource play important role in this regard. This study is designed with the objectives of assessing the contribution of forests to annual income of rural households and identifying its determinants with the case of Essera woreda forest in western Ethiopia. It also examined the gender dimensions of forest income and how this income varies with the wealth status of households key informants interview focus group discussion and household based questionnaire survey were used to collect data. On average income from crop production accounted for (40.7%) of the total annual household income. Forest income is second in importance contributing (32.6%), income from livestock off and non-farm activities and woodlots accounted for (13.6%), (11.4%) and (1.7%) of the total household income respectively. Firewood is the most used forest product and constituted the largest proportion (79%) of the total forest income. Forest income is more important for poor households (47.3%) than for medium (30.5%) or rich (20.2%) households. It is also more important for female headed households (58.2%) than for male headed households (29%). The gender dimension of forest income is also important within the household. Female members generated about four times more forest income (77% of the household forest income) than male members (23%). Policy to promote new forest management arrangement such as participatory forest management (PFM) needs to take in to account the major forest users and the types of products they depend on and be accompanied with other poverty reduction measures so that improved forest conservation outcome will not have negative consequences on local livelihoods particularly on poor and women who depend most on the forest.

Background and Research Highlights: Despite all the concerns and initiatives, natural resources like forests, as well as biodiversity are decreasing at an alarming rate worldwide. Conservation is considered as one of the major tools to prevent such loss and rapid degradation. Evidence around the world shows the adverse effects of conservation laws and policies on indigenous peoples and other local communities. Objectives: This study was conducted in one of the forest-dependent communities situated in Sundarban (world’s largest mangrove forest) to understand the impact of conservation laws and policies on their livelihood. Materials and Methods: A qualitative methodology was designed to collect data, using focus group discussions and case study with community people, and individual interviews with the personnel from NGOs and relevant government departments. Findings: Strict conservation policies and restrictions in accessing forest resources made lives and livelihoods of the local community insecure and unstable, thus putting the community in a vulnerable situation. The had to leave their traditional mode of income and look for alternative livelihood options. Almost no evidence was found in relation to upkeeping their rights in conservation activities. Prohibited movement, provision of punishment for entering into the forest without proper permission and struggles in everyday life were some of the highlighted issues. They had no participation in conservation activities, management of alternative livelihood options, and even they were not sensitized before putting restrictions. Although they had a history of emotional and physical attachment with the forest, existing activities did not consider these issues. In addition, corruption and abuse of power by law enforcement agencies towards the local community intensified the sufferings. Conclusion: This study argues that the realization of human rights in conservation activities and the sensitization of the implementing stakeholders are prerequisites for ensuring the sustainability of both biodiversity and the affected people.

Cameroon territory is experiencing significant land use and land cover (LULC) changes since its independence in 1960. But the main relevant impacts are recorded since 1990 due to intensification of agricultural activities and urbanization. LULC effects and dynamics vary from one region to another according to the type of vegetation cover and activities. Using remote sensing, GIS and subsidiary data, this paper attempted to model the land use and land cover (LULC) change in the Centre Region of Cameroon that host Yaoundé metropolis. The rapid expansion of the city of Yaoundé drives to the land conversion with farmland intensification and forest depletion accelerating the rate at which land use and land cover (LULC) transformations take place. This study aims at assessing the impacts of both agriculture and urbanization on the LULC change in the Centre Region of Cameroon. A detailed LULC map from MAPBOX high resolution images and three LULC maps were produced from Landsat TM-OLI images (1984-2015). A maximum likelihood classification techniques using ERDAS Imagine, showed forest decline with a total loss of 54% in thirty years. Also, Landsat and MAPBOX images to which we added 1951 aerial photograph and SPOT 6 (2006) were used to analyse urban growth in the city of Yaoundé. The results show a remarkable urban spatial spread of the metropolis between 1951 and 2015, with a peak in 2000. Images processing enabled us to analyse the long term dynamics of LULC change since the 1950s in this Region using ArcGIS & QGIS software’s. Based on this dynamic, a LULC projection map was produced using Markov model on IDRISI Selva, demonstrating the decrease of the dense forest (45% in 2015 to 0.25% in 2050). It was estimated that by 2050, the entire dense forest can be depleted if nothing is done, while only 12.67% of the secondary forest would remain in the Region. Such a projected map is very useful to decision makers for council development and urban planning. This effective forest depletion ties with the hypothesis that urbanization of Yaoundé and its secondary surrounding satellite cities (within a radius of 30-100km) is a veritable driving force of deforestation.

Machine learning plays a key role in present day crime detection, analysis and prediction. The goal of this work is to propose methods for predicting crimes classified into different categories of severity. We implemented visualization and analysis of crime data statistics in recent years in the city of Boston. We then carried out a comparative study between two supervised learning algorithms, which are decision tree and random forest based on the accuracy and processing time of the models to make predictions using geographical and temporal information provided by splitting the data into training and test sets. The result shows that random forest as expected gives a better result by 1.54% more accuracy in comparison to decision tree, although this comes at a cost of at least 4.37 times the time consumed in processing. The study opens doors to application of similar supervised methods in crime data analytics and other fields of data science

China historically exhibits spatial differentiation from population distribution to ecological or economic development, and the forest pest control work is an epitome of this tendency. In recent times, global warming, man-made monoculture tree plantations, increasing human population density and intensified international trade aggravate forest pest outbreaks. Although Chinese government has complied with the internationally recommended practices, few stones remain unturned due to existing differential regional imbalance of forest pest distribution and control abilities. Evidence shows that the high-income provinces in the south have taken advantage of economic and technological superiority, resulting in the adoption of more efficient pest-control measures. To the contrary, in economically underdeveloped provinces of the northwest, a paucity of financial support has led to serious threats of pest damage that almost mirrored the demarcations of the Hu Huanyong Line. In this paper, we propose introducing public-private partnership (PPP) model into forest pest control and combining the national strategies to enact regional prevention measures in order to break the current spatially differentiated trends in China.

Understanding the role of invasive species in ecosystem functioning represents one of the main challenges in ecology. Pteridium aquilinum is a successful cosmopolitan invasive species with negative effects on the ecological mechanisms that allow secondary succession. In this study we evaluated whether P. aquilinum favours the establishment of alternative states, as well as the effect of recovery strategies on the secondary succession. A random stratified sampling was established with three treatments, each one with at least 50 year of fern invasion and with variations on the periodicity of fires and cuttings (chapeos) vs one control without fern bracken We determined the species richness and composition, as well as the relative importance value (IVI) in each treatment. We found that P. aquilinum decreases the action of the mechanisms that allow secondary succession, particularly facilitation. The recovery strategies consist in monthly cuttings and control fires allow to recover the secondary succession and eventually, the regeneration of areas invaded by P. aquilinum. Our study has relevant implications on the ecology of alternative state, and in practical strategies to maintain tropical forests, as well as for the maintenance of environmental services and sustainability.

This review paper is intended to exhibit the interplays between environmental change and rapid population growth in developing countries. In the course of discussion, the impacts of rapidly population growing on the environment have been discussed, and evidence, from various parts of the world have been traced. Studies on the impacts of population pressure on environment have been critically reviewed. It is revealed that all across the developing countries, farm size is shrinking as farmers continue to subdivide holdings among their children. In countries such as Malawi, Rwanda, Ethiopia, Haiti, Nepal and Bangladesh, population growth rates are high, and the non-farm sector is still in its early stages of development. Demographic pressure, land scarcity, and land fragmentation drive greater rural vulnerability and poverty, marked by decreased food security, inadequate response to such natural disasters such as drought or pest infestations, weakened resilience to shocks, and poor health. It is not just the supply of food, fodder, and fuel wood but the resource base itself and the lives that depend upon it are being affected. The evidences pinpoints that man through his non-sustainable production and consumption patterns, is placed at the heart of environmental changes. However, contradictory view, and practices are also in place that the population growth has positive impacts environmental restoration and improvements, while other evidences show insignificant effect of population on the environment. This contradicting scenario puts scholars in argument, and still need further research. Hence, it would be a blind generalization to draw conclusion from this relationship alone, rather, another factor that acts beyond population pressure must also be considered to justify the impact of population on environmental changes.

Linking climate action with sustainable development goals (SDGs) might incentivize social and political support to forest conservation. However, further examination of the conceptual entry points for linking efforts for reducing forest-based emissions with those for delivering SDGs is required. This review paper aims to contribute to fulfilling this research need. It provides insights into the links between conserving forests for climate change mitigation and peacebuilding. Specifically, the paper examines opportunities to harness climate finance for conserving forests and achieving long-lasting peace. It does so via a literature review and the examination of the Orinoquia region of Colombia. Findings from the literature review suggest that harnessing climate finance for conserving forests and peacebuilding is, in theory, viable if activities are designed in accordance with social, institutional, and economic factors. Meanwhile, the Orinoquia region provides evidence that these two seemingly intractable problems are proposed to be solved together. At a time when efforts for reducing forest-based emissions are being designed and targeted at (post-) conflict areas in Colombia and elsewhere, the paper’s findings might demonstrate to government agencies — both environmental and non-environmental — the compatibility of programs aimed at reducing forest-based emissions with efforts relating to peacebuilding and sustainable food.

The early-season area estimation of the winter wheat crop as a strategic product is important for decision makers. Classification of multi-temporal images is an approach which is affected by many factors like appropriate training sample size, proper frequency and acquisition times, vegetation indices (VIs) type, temporal gradient of spectral bands and VIs, appropriate classifier and missed values because of cloudy conditions. This paper addresses the impact of appropriate frequency and acquisition times and VIs type along with the spectral and VI gradient on random forest (RF) classifier when missed values exist in multi-temporal images. To investigate the appropriate temporal resolution for image acquisition, the study area was selected on an overlapping area between two LDCM paths. In our developed method, the miss values of cloudy bands for each pixel are retrieved by the mean of k-nearest ordinary pixels. Then the multi-temporal image analysis is performed by considering different scenarios provided by decision makers in terms of desired crop types that should be extracted at early-season in the study areas. The classification results obtained by the RF decrease by 1.6% when temporally missed values retrieved by the proposed method, which is an acceptable result. Moreover, the experimental results demonstrated that if temporal resolution of Landsat 8 increased to one week the classification task can be conducted earlier with almost better results in terms of OA and kappa. The impact of incorporating VIs along with the temporal gradients of spectral bands and VIs as new features in RF demonstrated that the OA and Kappa are improved 3.1% and 6.6%, respectively. Furthermore, the obtained result showed that if only one image from seasonal changes of crops is available, the temporal gradient of VIs and spectral bands play the main role to discriminate remarkably wheat from barley. The experiments also demonstrated that if both wheat and barley merge to a single class the crop area can be estimated two months earlier with 97.1 and 93.5 in terms of OA and kappa, respectively.

We use the third version of the Canadian Local Climate Model as a diagnostic tool to study the climatology of observed CG lightning activity at Maniwaki (latitude: 46,23°N; Longitude: 75,58°W). We examine the dependence between the hourly lightning activity and the related atmospheric variables during the warm season of sixteen years (between 1984 and 2004). The goal of this research is: a) to evaluate the atmospheric static state evolution and its moisture contents for conditions having generated lightning occurrence, b) to develop a CG lightning parameterization, and c) to verify this CG lightning parameterization on other Canadian areas. The freezing level altitude and the precipitable water content are used to estimate the static air instability and its moisture content respectively. These two parameters are served to develop the CG lightning parameterization. A comparison between the observations and simulations CG lightning occurrence and frequency at Maniwaki showed a mean absolute error rate of 27% and 55% respectively. We apply this parameterization at four Canadian regions, distributed from west to east. The simulated CG lightning results are comparable to observed CG lightning at Maniwaki and tested regions. The application of the CG lightning parameterization to the daily data enabled us to find the monthly results. This application represents a preliminary stage for validation this parameterization in regional numerical models in Canada during the historic period.

This research presents a comprehensive framework for efficiently generating forest fire datasets from Google Earth Engine data sources. The primary contribution of this work lies in providing a methodology to swiftly extract forest fire factors without the need for permissions or access to private datasets, rendering the dataset openly accessible and shared without barriers. Furthermore, given that the remote sensing data used is a global dataset, it can be applied in any region without restrictions. In this study, Peninsular Malaysia is chosen as a case study to demonstrate the framework's effectiveness. The generated dataset includes essential variables including the climate and environment, landcover, topography, and anthropogenic factors facilitating the analysis of fire occurrences. The methodology empowers data scientists, enabling them to leverage their analytical skills on the extracted dataset without requiring specialized remote sensing knowledge. Additionally, this study also showcases the adoption of large language models, specifically GPT-4 with the Noteable plugin, as a tool for conducting preliminary analyses on the generated dataset. Sample analyses reveal that several key features, including the KBDI, LST, PDSI, climate water deficit, and precipitation, significantly impact forest fire occurrences in Peninsular Malaysia. Despite the successful application of the GPT-4 with Noteable plugin, certain limitations and challenges are identified, highlighting the necessity for further validation of the tool's applicability and limitations. This study encourages future research to (1) adopt the proposed framework in other regions, (2) explore more detailed analyses encompassing all variables, and (3) leverage machine learning for advanced forecasting.

Estimating Forest growing stock volume (GSV) is crucial for forest growth and resource management, as it reflects forest productivity. National measurements are laborious and costly, however integrating satellite data such as optical, Synthetic Aperture Radar (SAR), and Airborne Laser Scanning (ALS) with National Forest Inventory (NFI) data and machine learning (ML) methods has transformed forest management. In this study, Random Forest (RF), Support Vector Regression (SVR), and Extreme Gradient Boosting (XGBoost) were used to predict GSV using Estonian NFI data, Sentinel-2 imagery, and ALS point cloud data. Four variable combinations were tested: CO1 (vegetation indices and LiDAR), CO2 (vegetation indices and individual band reflectance), CO3 (LiDAR and individual band reflectance), and CO4 (a combination of vegetation indices, individual band reflectance, and LiDAR). Across Estonia's geographical regions, RF consistently delivered the best performance. In the northwest (NW), RF achieved an R² of 0.63 and an RMSE of 125.39 m³/plot. In the southwest (SW), it achieved an R² of 0.73 and an RMSE of 128.86 m³/plot. In the northeast (NE), RF achieved an R² of 0.64 and an RMSE of 133.77 m³/plot, and an R² of 0.70 and an RMSE of 120.72 m³/plot was achieved in the southeast (SE). These results underscore RF's precision in predicting GSV across diverse environments, though refining variable selection and improving tree species data could further enhance accuracy.