Fermenter is a vessel that maintains optimum environment for the development of significant microorganism used in large scale fermentation process and the commercial production of products like Alcoholic beverages, Enzymes, Antibiotics, Organic acids etc. The fermenter aims to produce biological product like vaccines and hormones, it is necessary to monitor and control the different parameters like external and internal mass transfer, heat transfer, fluid velocity, shear stress, agitation speed, aeration rate, cooling rate or heating intensity, and the feeding rate, nutrients, base or acid valve. Fermentation in the fermenter are accomplished in several configuration and these simple configurations are batch, fed-batch and continuous fermentation process. Fermentation process is carried out in small or large size fermenter depending on product quantity. The selection of the suitable process depends on the fermentation kinetics, type of microorganism used and process economic aspects. Improved modelling tools, reactor operation and reactor design in bioreactor is because of mass transfer behavior and it is important for reaction rate maximizing, throughput rates optimization and cost minimizing. The fermenter design, fermentation process, types of the fermenter that are used in industries and heat and mass transfer in fermenter is discussed.

During summer 2016 in the District of Palermo, Italy, the rapid succession of four cases of invasive meningococcal disease among young adults, with one death, have had an extraordinary emphasis by Local and National mass media. The resultant “epidemic of panic” among general population overloaded vaccination Units of the Palermo District during following months. Strategies implemented by Sicilian and Local Public Health Authorities to counteract “meningitis fear” were: a) extension of active and free of charge anti-meningococcal tetravalent vaccination from age class 12–18 to 12–30 years old; b) implementation of vaccination units usual opening hours and rooms tailored for vaccine administration; c) development of informative institutional tools and timely communications throughout local mass media to reassure general population. In 2016, was observed an increase of anti-meningococcal coverage in Palermo District (+18% for 16th y.o. and + 14% for 18th y.o. cohorts) and at Regional Level (+11.2% and +13.5% respectively). Concurrent catch-up of other recommended vaccination for age (diphtheria-tetanus-pertussis-poliomyelitis and papillomavirus), resulted in further increase of doses administered. The fear for meningitis, managed by Sicilian Public Health Authorities, had positive reverberations in terms of prevention. In particular, informative strategies adopted sensibly contributed to get Sicilian young adults closer to vaccination issues.

Scarification involves the partial removal of the seed coat on the side of the hilum, opposite the radicle, to speed up germination in acorns. The aim of this study was to determine the influence of scarification on the germination capacity of pedunculate oak acorns, selected and prepared for sowing. The diameter, length and mass of acorns were measured before and after scarification in four batches of acorns harvested from uneven-aged trees (76, 91, 131 and 161 years). The measured parameters were used to determine the correlations between acorn dimensions and mass, and to calculate the dimensional scarification index and the mass scarification index in acorns. Scarified and non-scarified acorns from every batch were germinated on sand and peat substrate for 28 days. The analyzed acorns were characterized by average size and mass. Scarification decreased acorn mass by around 22% and acorn length by around 31% on average. Scarification and the elimination of infected acorns increased germination capacity from around 64% to around 81% on average. Acorns can be divided into size groups before scarification to obtain seed material with varied germination capacity. Larger acorns with higher germination capacity can be used for sowing in container nurseries, whereas smaller acorns with lower germination capacity can be sown in open-field nurseries.

Background We aimed to compare the retinal, optic disc vascular density (ODVD) values, and acircularity index (AI) of patients with idiopathic macular telangiectasia type 2 (IMT) and healthy individuals using the optical coherence tomography angiography(OCTA) device. Methods The study included 39 patients with IMT and 37 healthy controls. The OCTA findings of the patients and controls were examined. Results The total, parafoveal and perifoveal vascular density of the superficial capillary plexus, choriocapillaris blood flow, inside-disc ODVD, retinal nerve fiber layer (RNFL), and retinal thicknesses were found to be statistically significantly lower and the foveal avascular zone value was statistically significantly higher in the IMT group compared to the control group (p=0.001, p=0.01, p=0.02, p=0.01, p=0.009, p=0.002, p=0.02, respectively).There was a statistically significant negative correlation between best-corrected visual acuity (BCVA) and AI (p=0.02), a statistically significant positive correlation between peripapillary vascular density and BCVA(p=0.04). Conclusion We consider that the lower retinal, choriocapillaris, and ODVD values, retinal and RNFL thicknesses in the patients with IMT compared to the controls were due to vascular damage, remodeling, fibrosis, proliferation, and Müller cell damage. Ellipsoid zone defect, AI, and peripapillary vascular density are important indicators in the evaluation of visual acuity in these patients.

Individuals with Parkinson’s Disease (PD) are at an increased risk of falls due to associated motor symptoms and impaired postural control. Gait dysfunction, observed soon after diagnosis, leads to disability with disease progression. The purpose of this study was to determine if there were differences in dynamic postural control during self-paced walking and obstacle-crossing between persons with mild to moderate PD and healthy controls. Participants included nine individuals with mild to moderate PD (PD cohort) and nine age- and gender-matched controls (CON cohort). Anatomical marker trajectories and ground reaction forces were collected as participants walked along the pathway. Three successful representative right and left gait cycles were analyzed using Visual3D biomechanical software. Analyses, involving a mixed model ANOVA using R Statistical Software, examined spatiotemporal (ST) gait parameters for strides involving the leading and trailing limbs and dynamic balance variables, including COM - COP inclination angle, and the COP - COM M/L, COP - XCOM M/L, UMAX - XCOM M/L distances, at distinct points from the stance limb related to the leading and trailing legs. There were no differences between CON and PD for all ST gait parameters during obstacle crossing, except for a significantly reduced step length (p = 0.00489) for the PD group related to the trailing limb. However, there were significant main effects of Step and Condition interacting with Step for swing time, stance time, and step length. For both CON and PD groups the COP - COM , COP - XCOM , UMAX - XCOM metrics demonstrated that the COM was medial to the BOS from first double support, generally moving more medially through second double support for the stance limb during motion of the leading and trailing limbs. Event and Event interacting with Condition were significant for the COP - COM and COP - XCOM variables, while UMAX – XCOM was significant only for Event (p < 0.001). The PD group demonstrated significantly larger mean values for COP – COM M/L at first double support (p = 0.00435) and COP - XCOM M/L at second double support (p = 0.0158) for the second step. Our results suggest that the margin of stability may be useful in discerning dynamic postural control adaptations during walking and obstacle negotiation in persons with mild PD.

The Greenland Ice Sheet is now the largest land ice contributor to global sea level rise, largely driven by increased surface meltwater runoff from the ablation zone, i.e. areas of the ice sheet where annual mass losses exceed gains. This small but critically important area of the ice sheet has expanded in size by ~50% since the early 1960s, and satellite remote sensing is a powerful tool for monitoring the physical processes that influence its surface mass balance. This review synthesizes key remote sensing methods and scientific findings from satellite remote sensing of the Greenland Ice Sheet ablation zone, covering progress in 1) radar altimetry, 2) laser (lidar) altimetry, 3) gravimetry, 4) multispectral optical imagery and, 5) microwave and thermal imagery. Physical characteristics and quantities examined include surface elevation change, gravimetric mass balance, reflectance, albedo, and mapping of surface melt extent and glaciological facies and zones. The review concludes that future progress will benefit most from methods that combine multi-sensor, multi-wavelength, and cross-platform datasets designed to discriminate the widely varying surface processes in the ablation zone. Specific examples include fusing laser altimetry, radar altimetry, and optical stereophotogrammetry to enhance spatial measurement density, cross-validate surface elevation change, and diagnose radar elevation bias; fusing optical imagery, radar imagery, and microwave scatterometry to discriminate between snow, liquid water, refrozen meltwater, and bare ice near the equilibrium line altitude; combining optical reflectance with laser altimetry to map supraglacial lake, stream, and crevasse bathymetry; and monitoring the inland migration of snowlines, surface melt extent, and supraglacial hydrologic features.

In this study, the multi-relaxation-time lattice Boltzmann method is applied to investigate the oscillatory instability of lid-driven flows in two-dimensional semi-elliptical cavities with different vertical to horizontal aspect ratios K in the range of 1.0--3.0. The program implemented in this study is parallelized using CUDA (compute unified device architecture), a parallel computing platform, and computations are carried out on NVIDIA Tesla K40c GPU. To carry out precise calculations, the CUDA algorithm is extensively investigated, and its parallel efficiency indicates that the maximum speedup is 47.6 times faster. Furthermore, the steady--oscillatory Reynolds numbers are predicted by implementing the CUDA-based programs. The amplitude coefficient is defined to quantify the time-dependent oscillation of the velocity magnitude at the monitoring point. The simulation results indicate that the transition Reynolds numbers correlate negatively with the aspect ratio of the semi-elliptical cavity, and are smaller than those of the rectangular cavity at the same aspect ratio. In addition, the detailed vortex structures of the semi-elliptical cavity within a single period are also investigated when the Reynolds number is larger than the steady--oscillatory value to determine the effects of periodic oscillation of the velocity magnitude.

In this study, a cholera infection model with the bilinear infection rate is developed by considering the perturbation of the infection rate by the mean-reverting process. First of all, we give the existence of a globally unique positive solution for a stochastic system at arbitrary initial value. On this basis, the sufficient condition for the model to have an ergodic stationary distribution is given by constructing proper Lyapunov functions and tight sets. This indicates in a biological sense the long-term persistence of cholera infection. Furthermore, after transforming the stochastic model to an relevant linearised system, an accurate expression for the probability density function of the stochastic model around a quasi-endemic equilibrium is derived. Subsequently, the sufficient condition to make the disease extinct is also derived. Eventually, the theoretical findings are shown by numerical simulations. Numerical simulations show that the impact of regression speed and fluctuation intensity on stochastic systems.

Graphene oxide (GO) is considered as one of the promising adsorbents for the removal of various heavy metal contaminants in aquatic environment, due to its beneficial structural, chemical and electronic properties. Using the density functional theory (DFT) approach, we investigate the reactivity of a model GO nanoparticule (C30H14O15) toward neutral and charged lead (Pb) and cadmium (Cd) atoms. We found the model metal-free GO to have a high chemical reactivity. To study the adsorption of the metal atoms on the GO nanoparticle, we have used a single and doubly-adsorbed neutral (Pb0 and Cd0) and charged (Pb2+, Cd2+) atoms. After identified possible adsorption sites on the GO, we found that a single charged metal ion binds more strongly than a neutral atom of the same type. To determine the possibility of multiple adsorptions of GO nanoparticle, two metal atoms of the same species are co-adsorbed on its surface. Our calculations reveals a site-dependent adsorption energy such that when two atoms of the same specie are adsorbed at sites Si and Sj , the binding energy per atom depends on the whether one of the two atoms is adsorbed firstly on the Si or Sj sites. It is also found that the binding energy per atom for two co-adsorbed atoms of the same specie is less than the binding energy of a singly-adsorbed atom which suggests that atoms may become less likely to be adsorbed on the GO nanoparticle when their concentrations increase. This applies to both neutral and charged atoms. We adduce the origin of this observation to be interplay between metal-metal interaction on the one hand and GO-metal on the other, with the former resulting in a less binding for the charged adsorbed metals in particular, due to repulsive interaction between two positively charged ions. The frontier molecular orbitals analysis and the calculated global reactivity descriptors of the respective GO- metal complexes revealed that all the GO-metal complexes have a smaller HOMO-LUMO gap (HLG) relative to that of pristine metal-free GO nanoparticle. This suggests that although the GO-metal complexes are stable, they are less stable compared to metal-free GO nanoparticles. The negative values of the chemical potentials obtained for all the GO-metal complexes further confirms their stability. Our work calculates parameters that will be crucial to rational design of GO nanoparticles for Pb abd Cd ions contaminants removal, and may find application in water purification for example.

Rationale - From the year 1 anno Domini until 1855 with the third Plague, major pandemics occurred on average every 348 years. Since then, they have occurred on average every 33 years, with Coronavirus disease 2019 (COVID-19) now underway.Even though current technologies have greatly improved the way of life of human beings, COVID-19, with more than 700 000 000 cases and 6 950 000 deaths worldwide by the end of 2023, reminds us that much remains to be done. Objective - Given the frequency and duration of recent pandemics, it might be wise to start thinking about preventative methods to minimize the impact of future pandemics. This report looks back at 18 months of COVID-19, from March 2020 to August 2021, with the aim of highlighting potential solutions that could prove practical, or even essential, for the future. Material - COVID-19 data, including case and death reports, were extracted daily from the Worldometer platform to build a database for macroscopic analysis of the spread of the virus around the world. Demographic data were integrated into the COVID-19 database for a better understanding of the spatial spread of the SARS-CoV-2 virus in cities/municipalities. Method - Without loss of generality, we only analyzed data from the top 30 (out of 200 and above) countries ranked by total number of COVID-19 cases. Statistics (regression, t-test (p < 0.05), correlation, mean ± std, etc.) were carried out with Excel software. Spectral analysis, using Matlab software, was also used to try to better understand the temporal spread of COVID-19. Results - A good linear correlation was observed between the number of cases and the respective number of deaths depending on the country, i.e. y = 0.0121x + 19559 with R² = 0.8042. The analysis then focused mainly on the number of cases.This study showed that COVID-19 mainly affects G20 countries. The most interesting result is that cities/municipalities with high population density are a powerful activator of the spread of the virus. The current demographic context seems to be becoming a societal problem that must be addressed adequately.Spectral analysis highlighted that the very first months of spread of COVID-19 were the most notable with a strong expansion of the SARS-CoV-2 virus. On the other hand, the following six months showed a certain stability due mainly to multiple preventive measures such as confinement, closure of non-essential services, wearing of masks, distancing of 2 meters, etc. Discussion - Analysis of case and death data showed that COVID-19 mainly affects G20 countries. Nevertheless, the most interesting result of this study is that cities and municipal areas with population densities of several thousand inhabitants per square kilometer largely favored the spread of the SARS-CoV-2 virus. It is believed that such a demographic context is becoming a societal problem that developed countries around the world will sooner or later face and therefore needs to be adequately addressed. Conclusion - COVID-19 has made us understand that it is time to act both preventatively and curatively. Phenomenological insights suggest that the next pandemic could occur in less than 50 years. It may be time to launch new societal projects aimed at relieving congestion in densely populated regions.

This study comprehensively investigates Al2O3's mechanical properties, focusing on fracture toughness, surface energy, Young's modulus, and crack propagation. The density functional theory (DFT) is employed to model the vacancies in Al2O3, providing essential insights into this material’s structural stability and defect formation. The DFT simulations reveal a deep understanding of vacancy-related properties and their impact on mechanical behavior. In conjunction with molecular dynamics (MD) simulations, the fracture toughness and crack propagation in Al2O3 are explored, offering valuable information on material strength and durability. The surface energy of Al2O3 is also assessed using DFT, shedding light on its interactions with the surrounding environment. The combination of DFT and MD simulations provides a robust framework for a comprehensive understanding of Al2O3's mechanical properties, with implications for material science and engineering applications.

In this study, alfalfa silage with different packing densities (500 kg/m3, 600 kg/m3 and 700 kg/m3) were set up under outdoor high temperature and indoor normal temperature. The chemical composition, fermentation quality and microbial community of alfalfa silage were analyzed. The results showed that DM and WAC content decreased with the increase of density. When the density is 600kg/m3, CP content reaches the maximum and ADF content is the lowest. Temperature has a certain effect on alfalfa silage. The content of Lactobacillus plantarum fermented at high temperature is lower than that fermented at normal temperature. At the same time, the content of Lactobacillus plantarum decreased with the increase of packing density. However, the content of Lactobacillus plantarum was the lowest when the packing density was 600 kg/m3 at high temperature. In summary, this study explained the effects of different temperature and density on alfalfa fermentation quality and microbial community, and clarified that the density should be reasonably controlled within 600 kg/m3 during alfalfa silage, providing theoretical support for production practice.

In this paper, we examine a modified Friedmann model designed to explain cosmic structures and late-time accelerated expansion of the universe, grounded in the spatial distribution of luminous matter. Through comprehensive simulations of our universe, we observe a notable surge in the formation rate of galaxies at redshift z≈1, characterized by a peak expansion rate in cosmic structures formed at z ≈0.9, reaching its zenith at z ≈2. Subsequently, a transition occurs before the onset of dark matter-induced accelerated expansion. The acceleration of the universe stands as an entrenched and virtually model-independent theoretical tenet, resilient to the ongoing debate surrounding the enigma of dark energy. A distinctive redshift transition zone marks the shift from cosmic deceleration to accelerated expansion. The transition is proportional to matter density and contingent upon the geometry of the universe. The influence of the cosmological constant on the evolution of cosmic structures in the CDM paradigm appears insufficient in curtailing the efficiency of late-time structure formation compared to the observed values in the modified model

The pressing process and density profile of particleboards produced with addition of waste wood containing phenol-formaldehyde (PF) resin was presented. The particles were melamine-urea-phenol-formaldehyde (MUPF) resinated. Recovered particles were obtained from post-industrial waste plywood. The press closing time recorded during the pressing of mats containing only recovered particles in the core layer (100%), at a unit pressure of 3 MPa, in which the face layer rate was 50%, resin load for face and core layer was 12% and 10% was shorter by 29% than for the industrial particle mats. Regardless of the level of variability of independent factors the overheating time of mats to a temperature of 100 °C, containing recovered particles was 10% - 20% shorter than the time of overheating mats with industrial particles. The greatest impact (52%) on maximum density of the face layer of particleboards was demonstrated by the content of the recovered particles and the resin load (32%). The maximum density area of the face layer was located closer to the surface in particleboards produced with a higher (80%, 100%) content of the recovered particles, a higher (i.e. 12% and 10%, respectively, for face and core layer) resin load, a lower (35%) face layer rate and a higher (3 MPa ) unit pressure.

A study on flywheel geometries is presented here with the use of finite element modelling (FEM) simulations. The study analyses the stress behaviour of flywheel rotors subject to the rotational speed that creates the maximum stress that the flywheel can support, and then calculates the rotational energy mass ratio (energy density) for each geometry. The obtained geometry was Gaussian section for the Flywheel rotor. The used material for the simulations is carbon fibre Hexcel UHM 12000. The best results were a rotational speed of ≈279.000 rpm and rotational energy density of ≈ 440 Wh/kg for a single disk, but this keeps the total energy low. To increase the total energy, Flywheels with 2 and 3 rotors were analysed. Then the stability under rotation of these Flywheels were analysed, some instability was found and a solution was presented.

The research on the distribution of rural buildings is one of the fundamental works of urban-rural development in Vietnam. Adopting Mask R-CNN deep learning framework and collecting sub-meter remote sensing images, this research used a remote sensing interpretation model of rural buildings trained based on East Asian characteristics of rural buildings and successfully recognized about 2.87 million rural buildings in 34 Vietnamese provincial administrative districts with a total area of rural buildings of 2,492 million square meters. The reliability of the identification results was verified by manual detection and quantitative statistics, and a multi-scale database of rural buildings in Vietnam based on individual rural buildings was created. Based on the database, this paper analyzes the distribution characteristics of rural buildings and summarizes characteristics of rural buildings distribution at the country, regional, and provincial scales. The identification results lay the foundation for the next study of urban-rural relations in Southeast Asia and the construction of a basic database on villages.

The main advantage of using the ferroelectric material as a component of complex heterostructure is the ability to tune various properties of the whole system by means of external electric field. In particular, the electric field may change the polarization direction within the ferroelectric material and consequently affect the structural properties, which in turn affects the electronic and magnetic properties of the neighboring material. Besides, the ferroelectrics proceed the electrostriction phenomenon, which is promising to be used to affect the magnetic states of interface state in the heterostructure with a magnetic component. The interfacial phenomena are of a great interest since they provide an extended functionality useful for electronic devices of a new generation. Following an idea of utilizing a ferroelectric in heterostructures component in the present work we consider 2DEG, Rashba effect, the effect of magnetoelectric coupling and magnetostriction in order to emphasize the advantages of such heterostructures as components of devices. For this purpose model systems of LaMnO3/BaTiO3, La2CuO4/BaTiO3, Bi/BaTiO3 and Bi/PbTiO3, Fe/BaTiO3 heterostructures are investigated by density functional theory calculations.

Multi-board electronic cases with high density and high power modules are widely used in industrial power supply management. With the improvement of case performance and miniaturization requirements, heat dissipation becomes one of the important factors to be considered in the design process. First,The existing small electronic thermal design methods focus on heat dissipation structure or heat source layout optimization,and ignores on-load test for modeling analysis. Second,The selected power module has on-load power consumption, resulting in relatively low calorific value and the effectiveness of thermal design cannot be verified. Third, The thermal lacks Intelligent monitoring and feedback control mechanism. In order to solve these problems, this paper designs a kind of heat dissipation case with intelligent temperature control based on high-power and high-density power supply array. Based on the extremely miniaturization design principle, we adopt the composite heat dissipation mode based on conduction and supplemented by forced air cooling . The case is made of magnesium and aluminum alloy with a perforated design. Finally, we compare and analyze with the existing cooling design. The results show that the case is smaller in volume, and the cooling performance parameters are slightly better than the existing case. Under the condition of high-density and high-power design, The output power of the whole system is not less than 10kw and the lowest packing-level density is not less than 47w/cm2 with high reliability, portability and practicability. It also provides technical support and prototype support for the standardized design of similar power arrays.

Changes in the atomic and electronic structure of silicon carbide 3C-SiC (β-SiC), resulting from lead adsorption, have been studied within the density functional theory. The tests were conducted for three representative surfaces with varying degrees of lead coverage. Results indicate that chemisorption occurs, with the strongest binding, found on the hexagonal surface (111) in interaction with three dangling bonds. The adsorption energy rises with increasing coverage, especially as the surface approaches saturation. Analysis of the data was focused on parameters important for corrosion processes such as bond distances, binding energies, Bader charges and charge density difference.

One of the strategies to reduce the contents of the low density lipoproteins (LDLs) in a blood is a hemoperfusion, in which case they are selectively retracted from plasma by an adsorber located outside the patient body. Recently, a photo-controllable smart surface was developed for this purpose characterised by high selectivity and reusability [C.Guo et al., ACS Applied Materials &amp; Interfaces 2022, DOI:10.1021/acsami.2c07193]. We present a mesoscopic model for such a setup involving the azobenzene-containing polymer brush and the model LDL particles. The latter comprise an uniform spherical core covered by a shell of elongated particles representing phospholipids. The system is studied using the coarse-grained molecular dynamics simulation. We examined the dependences of the binding energy on both the length of polymer chains and the grafting density of a brush, and established optimal conditions for the adsorption. These are explained by a competition between the concentration of azobenzenes and phospholipids in the same spatial region, flexibility of polymer chains, and excluded volume effects.

The present review article concludes with three different types of materials recently used to enhance the efficiency of supercapacitors. The first type involves carbon-based materials for storage and supercapacitor applications. The carbon materials could be obtained naturally and synthesized manually based on the needs. The second type discusses the recent advances in metal oxide materials for high-performance supercapacitors. The metal oxide materials involve in different types of attachment through the bi-tri metallic bonding, which enhances the specific capacitance. The third type involves recently advanced materials for high energy and power density application. The power and energy density of the materials is enhanced by the surface modification of the materials. In recent days, the MXene and Nano-composite materials seems to be an appropriate material to increase the power and energy density of the device.

The false codling moth (FCM), Thaumatotibia leucotreta (Meyrick), is believed to have originated from Ethiopia and sub-Saharan Africa. Currently, this pest has extensively spread and is found in most parts of Africa, with records in approximately 40 countries in over 100 host plant species. Despite Thaumatotibia leucotreta being the leading cause of interceptions of Capsicum and cut flowers exported by Kenya to the European Union, information on abundance and damage levels inflicted on capsicum is limited. The objective of the study was to assess the abundance and damage levels of T. leucotreta on capsicum in the selected counties in Lower Eastern Kenya (Kitui, Machakos, and Makueni counties). Higher T.leucotreta larval density per farm was recorded in Kitui County compared to other counties. In farms with capsicum only (not intercropped with other crops), the mean number of FCM larvae was relatively higher in Kitui. Farming practices such as the use of uncertified seeds and seedlings and the excessive use of pesticides may be the major contributors to high larval incidence in Kitui County.

Phase synchronization of weakly coupled limit cycle oscillators are related to the stability of the zero solution of the reduced-order dynamics of phase differences, represented by a systems of differential equations on a hypertorus. Using Rantzer's density function, a dual form of Lyapunov function, we propose a method to certify almost global stability of an equilibrium on a hypertorus. We show that the proposed method can certify robustness of phase synchronization of all-to-all and weakly coupled limit cycle oscillators with respect to disturbances in phases. The method leverages sum of squares polynomial optimization to construct the certification function.

This study investigated the development of Aedes aegypti density in houses of the urban locality of Poblado Miguel Alemán Valdes, in the Sonora state of Mexico, after application of 1% propoxur paint as full wall coverage (IP) and targeted indoor painting (IP 1m) in comparison to IRS with propoxur 70% WP (full wall coverage). The 1% propoxur paint was applied by the homeowners by brushing and rolling at the recommended dose of 1L/8 m², equivalent to 1.5 g a.i./m², while IRS was conducted by professionals with Propoxur 70% WP at a dose of 1 g a.i./m². Adult mosquito surveys were conducted in a random sample of houses in each block one week before the interventions and at week 1, month 1 to 4, month 6, month 9 and month 12 post-interventions. All three propoxur based treatments provided similar reductions (43.7%, 44.9% and 41.3% for IP, IP 1m and IRS respectively) in the fraction of houses positive in female Aedes aegypti resting indoor and outdoor as one year average of 8 follow up surveys. Indoor resting density of Aedes females during the one-year evaluation was reduced by 77.5% through IP followed by IP 1m with 64.2% reduction and 30% reduction with IRS. Culex mosquitoes’ interior density was affected as well by the insecticide treatments with similar average reductions for IP 1m (50.0%) and IRS (57.8%) in comparison with control. Aedes breeding was impacted by the insecticide paint in similar extent for both interventions, expressed by a substantial reduction of the House Index (20.1% IP, 31.2% IP 1m) and especially the Container Index (51.8% IP, 61.7% IP 1m) during the one-year surveys in comparison to control. In contrast, IRS treated block experienced an increase in both indexes. However, despite IP and IP 1m impacted in Aedes adult and immature indexes with noticeable reductions, the differences in all cases were not significative among the different insecticide treatments. The low sample size and mosquito population levels may have influenced the statistical outcomes. More than 80% of the interviewed residents were satisfied with the effectiveness of the paint and IRS treatments. The determination of the blood cholinesterase activity of tested individuals after the use of the carbamate paint and IRS in this study did not exceed acceptable inhibition limits. This study suggests that the application of propoxur paint by homeowners as full house coverage or as targeted indoor painting can be a safe and accepted intervention method for density reduction of Aedes aegypti populations in urban environments.

Three genera of very large volant birds existed for most of the Pliocene: the Pelagornithidae seabirds; the large North American Teratornithidae and the stork Leptoptilos falconeri in Africa and Asia. All became extinct around 3 Ma. The reasons for their demise are puzzling, as the Pelagornithidae had a world-wide evolutionary history of more than 50 Ma, smaller teratorns were still extant in the Holocene and smaller stork species are still globally extant. Extant large birds have a common critical takeoff airspeed suggesting a biomechanical limit in terms of power, risk and launch speed, and simulations of the flight of these extinct species suggest that at 1 bar they would have exceeded this value. Estimates for the Late Pliocene atmospheric density are derived from marine and terrestrial isotopes as well as resin chemistry, both approaches suggesting a value of about 1.2 bar, which drops to present levels during the period 3.3 to 2.6 Ma, thus a loss in atmospheric density may have caused biomechanical and ecological stress contributing to their extinction and/or development of smaller forms. This hypothesis is examined in terms of a possible mechanism of atmospheric mass loss and how this would be seen in the geological record. At 1.2 bar all the extinct species present takeoff airspeeds similar to large extant volant birds and which match the expected power and kinetic energy levels.

The COVID-19 pandemic of 2020 changed the way we interact and engage in commerce at a fundamental level. Social distancing and stay-at-home orders leave businesses and cities wondering what economic activity will look like in the future. Given a likely reduction in face-to-face interactions, it is important to better understand how social interactivity influences economic outcomes. Here we measure the effect of social interactions in the workforce on patent production and economic efficiency. We decompose U.S. occupations into individual work activities, determine which of those activities are associated with face-to-face interactions, and reaggregate the labor force of each U.S. metropolitan statistical area (MSA) into a metric of social interactiveness. We then calculate each MSA’s density of social work activities and find that this measure is more highly correlated with an MSA’s per capita patent production than simple population density. This suggests that density of face-to-face interactions is the important driver of a city’s rate of invention. We close by exploring analogies between the development of cities and the development of stars, suggesting ways these analogies may help frame future research on cities.

A low calcium intake is associated with an increased fracture risk. We assessed the dietary calcium intake in a cohort of Italian individuals evaluated for low bone mineral density (BMD). A 7-day food-frequency questionnaire was administered to 1793 individuals consecutively referred at a Centre of the Italian Society for Osteoporosis, Mineral Metabolism and Skeletal Diseases for low BMD. In 30.3% (544/1793) and 20.9% (374/1793) of subjects the calcium intake was inadequate ( <700 mg/day) and adequate (>1200 mg/day), respectively. Patients with calcium intake <700 mg/day showed a higher prevalence of diabetes mellitus, idiopathic hypercalciuria and food allergy/intolerance (8.1%, 5.1%, 7.2%, respectively) than patients with calcium intake >700 mg/day (5.3%, 3.0%, 4.1%, respectively, p<0.04 for all comparisons), also after adjusting for age, gender and BMI. In 30.3% of fractured subjects the calcium intake was <700 mg/day. In Italy, a low calcium intake is highly prevalent in individuals at risk for low BMD. Importantly, an inadequate calcium intake is highly prevalent even in patients with history of fragility fractures. Only about a fifth of patients at risk for low BMD reported an adequate calcium intake

Significant progress has made in pattern recognition technology. However, one obstacle that has not yet overcome is the recognition of words in the Brahmi script, specifically the recognition of characters, compound characters, and word because of complex structure. For this kind of complex pattern recognition problem, it is always difficult to decide which feature extraction and classifier would be the best choice. Moreover, it is also true that different feature extraction and classifiers offer complementary information about the patterns to be classified. Therefore, combining feature extraction and classifiers, in an intelligent way, can be beneficial compared to using any single feature extraction. This study proposed the combination of HOG +zonal density with SVM to recognize the Brahmi words. Keeping these facts in mind, in this paper, information provided by structural and statistical based features are combined using SVM classifier for script recognition (word-level) purpose from the Brahmi words images. Brahmi word dataset contains 6,475 and 536 images of Brahmi words of 170 classes for the training and testing, respectively, and the database is made freely available. The word samples from the mentioned database are classified based on the confidence scores provided by support vector machine (SVM) classifier while HOG and zonal density use to extract the features of Brahmi words. Maximum accuracy suggested by system is 95.17% which is better than previously suggested studies.

Understanding the physical properties of ultramafic rocks is important for evaluating awide variety of petrologic models of the oceanic lithosphere, particularly upper mantle and lower crust. Hydration of oceanic peridotites results in increasing serpentine content, which affects lithospheric physical properties and the global bio/geochemical cycles of various elements. In understanding tectonic, magmatic and metamorphic history of the oceanic crust, interpreting seismic velocities, rock composition and elastic moduli are of fundamental importance. In this study we show that as serpentine content increases, density decreases linearly with a slope of 7.85. We also correlate increase in serpentine content with a linear decline in shear, bulk and Young’s moduli with slopes of 0.48, 0.77, 0.45 respectively. Our results show that increase in serpentine content of lower crust and forearc mantle could decrease elasticity of lithospehere and result in break-offs. Therefore tectonic processes at peridotite rich slow spreading ridges may be strongly affected by serpentine content, particularly serpentinization may be responsible for discontinuities in thin crust, and formation of weak fault zones.

To generate a probability density function (PDF) for fitting probability distributions of real data, this study proposes a deep learning method which consists of two stages: (1) a training stage for estimating the cumulative distribution function (CDF) and (2) a performing stage for predicting the corresponding PDF. The CDFs of common probability distributions can be adopted as activation functions in the hidden layers of the proposed deep learning model for learning actual cumulative probabilities, and the differential equation of trained deep learning model can be used to estimate the PDF. To evaluate the proposed method, numerical experiments with single and mixed distributions are performed. The experimental results show that the values of both CDF and PDF can be precisely estimated by the proposed method.

The dislocation density tensors of thin elastic shells have been formulated explicitly in terms of the Riemann curvature tensor. The formulation reveals that the dislocation density of the shells is proportional to KA3=2, where K is the Gauss curvature and A is the determinant of metric tensor of the middle surface.

Water treatment efficiency of several filter media such as perlite, modified (silicated) perlite, zeolite and sand were studied on wastewater. This study contains 2 distinct experiments which the first one emphasize on the modified perlite’s performance in removing turbidity which has been gone through 3 phases including low turbidity model water, mid turbidity and high turbidity model water; the second experiment underlines the differentiation between 3 evolutionary material based on perlite which undergoes the filtration process with certain turbid model water. It was dedicated that modified perlite removed more than 90% of turbidity and it functions better than other materials with high turbidity (more than100 NTU). The experiments have been conducted with sodium silicate perlite, normal perlite and synthetic zeolite perlite in order to determine the optimized material which is able to be substituted with perlite in the filtration process.

Fractal array antennas are multiband arrays having ultra wide band and space filling facility. But Side lobe levels and large number of antenna elements are the major designing challenges of these arrays. In this paper, design and analysis of octagonal fractal array antenna is investigated with Morse-Thue fractal density tapering technique (MTFDT). Due to the proposed technique, a remarkable improvement has observed in Side lobe levels and thinning of the elements can also be attained at the various iterations of octagonal fractal array antenna. These arrays are analyzed and simulated by MATLAB-15 programming.

The equation of state of asymmetric nuclear matter as well as the neutron and proton effective masses and their partial-wave and spin-isospin decomposition are analyzed within the Brueckner–Hartree–Fock approach. Theoretical uncertainties for all these quantities are estimated by using several phase-shift-equivalent nucleon-nucleon forces together with two types of three-nucleon forces, phenomenological and microscopic. It is shown that the choice of the three-nucleon force plays an important role above saturation density, leading to different density dependencies of the energy per particle. These results are compared to the standard form of the Skyrme energy-density functional and we find that it is not possible to reproduce the BHF predictions in the (S,T) channels in symmetric and neutron matter above saturation density, already at the level of the two-body interaction, and even more including the three-body interaction.

Brimonidine, a selective alpha-2 adrenergic agonist, used for treatment of open-angle glaucoma, has been shown to cause neurological side effects such as unresponsiveness, lethargy, hypoventilation, and stupor, mimicking opioid toxicity. We report one case of transient encephalopathy in a toddler, in whom brimonidine accidental toxicity was sus-pected and then confirmed by a toxicology study. The 8-month-old healthy girl child was taken to the pediatric ER since she was drowsy and hypotonic, with miosis. Brain CT scan and toxicological work-up on blood and urine were negative. Starting from hour +4, the child progressively improved, and by hour +6, she recovered to a normal state of consciousness. A survey of available drugs at the child’s reach showed the presence of brimonidine. Thus, ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) was applied to quantify brimonidine in urine and plasma samples, showing 8.40 ng/mL level and 0.79 ng/mL, respectively. To our knowledge, this is the first report for determining brimonidine levels in urine and plasma by UPLC-MS/MS. Insufficient knowledge of the family members about the potential hazards of an apparently innocuous, topical medication such as eye drops may put children at a greater risk of poisoning. Necessary warnings should be better given to parents when prescribing this medication.

To investigate whether high body mass index (BMI) increases the risk of recurrence and corre-lates with higher glucose uptake in recurrent lesions in post-menopausal female patients with breast cancer. The hospital database was searched to retrieve breast cancer patients, who had undergone an [18F]FDG PET/CT scan before neoadjuvant chemotherapy and curative-intent sur-gery. BMI was calculated at the baseline [18F]FDG PET/CT scan. There was a median follow-up of 5 years after the baseline PET/CT scan to identify: recurrence in the breast (T_rec); lymph nodes (N_rec); distant locations (M_rec). Furthermore, SUVmax was measured in the sites of recur-rence. A chi-square test was used to investigate any difference in the frequency of any recur-rence, T_rec, N_rec, and M_rec between overweight women (BMI≥25 kg/m2) and women with a BMI<25 kg/m2 (p<0.05). SUVmax, was compared using a t-test (p<0.05) between the two groups. A total of post-menopausal 142 women (BMI: 26.84±5.59; 84 overweight and 58 with normal weight) were retrieved. There were 48 recurrences at the follow-up. The chi-square test demon-strated in overweight women an increased frequency of any recurrence (35 vs. 13; p=0.025) and T_rec (15 vs. 2; p=0.018) and a higher T_rec SUVmax (4.74±2.90 vs. 1.85 ± 0.63; p=0.09) compared to women with a BMI<25 kg/m2. BMI seems to correlate with an increased rate of recurrence, espe-cially in the breast, and a higher glucose uptake in post-menopausal patients with recurrent breast cancer.

This paper presents one of the approaches to solution of the problem of the repulsion origin in gravity. The approach is based on the property of compactness characteristic for a self-gravitating object in General Relativity. Here we understand compactness as estimation of the upper boundary for mass such an object in a static two--dimensional sphere. Repulsion originates when this boundary is violated. The main hypothesis is formulated in the form of the principle of maximal mass within a two-dimensional static sphere. It is demonstrated that the principle is true for Schwarzschild black holes on absorption of the matter in the process of accretion, both in the classical case and with due regard for quantum-gravitational corrections. The results have been extended to black holes with the Schwarzschild-de Sitter metric in the early Universe. The applicability of the principle suggested is analyzed for the early and for the present Universe.

Background - Technological developments induced lifestyle changes and increase population physical inactivity. This change in lifestyle can affect the male-female morphological and physical fitness differences. The aim of this study is to determine and to compare the effect of sex differences in percentage of body fat on speed and endurance running performance. Methods - 72 male and 64 female students aged 20 to 23 years participated in this study. After assessing their morphological characteristics, running performances during 30 m and 400 m, and maximum aerobic velocity (MAV) and maximal oxygen consumption (VO2max) during a 20 m shuttle running test have been estimated for each subject. Male students were re-tested after being overweighed down with a weight equivalent to the mean differences in body fat recorded between the two sexes in the form of a loaded worn vest. Results – Male presented a percentage of fat mass (17.2 ±2%) significantly (p <0.001) lower than that of women subject (25.0 ±2.5%). Running performances during 30 m and 400 m, MAV and VO2max were significantly (p<0.001) better in males. During the weighted condition, male performances during 30 m and 400 m, MAV and VO2max were attenuated by 6.89%, 14.16%, 6.48% and 10.07%, respectively but remain significantly better than those of female students. Conclusion - The persistence of sex differences after overweighting male students indicates that body fat could be responsible for ≈ 50 to 70% of the observed differences between sexes performances during short and long sprints, and 20 m shuttle running test.

Body mass index has been studied as one of the factors that negatively influences COVID-19. In this work we intend to analyze this influence. A representative sample of the population of Beira Interior was used (around 2%), to which immunity research and a socio-demographic survey were carried out. It was found that obesity influences the vaccination rate, and all other variables analyzed were not influenced by the body mass index.

BACKGROUND: Body mass index (BMI) is calculated by dividing a person's height in meters by their weight in kilograms and is always expressed in kg/m². BMI is a reliable risk indicator for various diseases that can develop due to a higher percentage of body fat. There is a possibility of developing certain medical conditions including heart disease, high blood pressure, type 2 diabetes, gallstones, breathing problems and some malignancies that increase with BMI. OBJECTIVE: This study seeks to identify the trends in the Body Mass Index (BMI) of women visiting Better Life Primary Health Care Centre in Ondo City, Ondo State, Nigeria for various healthcare services. METHODOLOGY: Seventy (70) women who participated in this study were randomly selected using systematic random sampling. Their necessary information was obtained using a prepared record sheet to collect their data. Results were analysed using SPSS version 21. RESULTS: The results show mean age of the respondents is 30.50 + 6.52921 21 (30%) were between 31 – 35 years, 21 (30%) were traders, 36 (51%) had tertiary education, 39 (55.7%) were between 151 – 160 cm in height. 32 (45.7%) were between 60 – 80 kg in weight and 30 (42.9%) had normal weight, respectively. CONCLUSION: Body Mass Index (BMI) calculation is an essential tool that can help in identifying one of the significant public health issues that leads to obesity; a predisposing factor to various medical conditions like hypertension, musculoskeletal issues, heart diseases, cancers, and lots more. It is therefore important to incorporate BMI calculation into routine checks to prevent or reduce health burdens that may arise from obesity.

Major depressive disorder (MDD) is a serious mental illness with a heavy social burden, but its underlying molecular mechanisms remain unclear. Mass spectrometry (MS)-based metabolomics is providing new insights into the heterogeneous pathophysiology, diagnosis, treatment, and prognosis of MDD by revealing multi-parametric biomarker signatures at the metabolite level. In this comprehensive review, recent developments of MS-based metabolomics in MDD research are summarized from the perspective of analytical platforms (liquid chromatography-MS, gas chromatography-MS, supercritical fluid chromatography-MS, etc.), strategies (untargeted, targeted, and pseudotargeted metabolomics), key metabolite changes (monoamine neurotransmitters, amino acids, lipids, etc.), and antidepressant treatments (both western and traditional Chinese medicines). Depression sub-phenotypes, comorbid depression, and multi-omics approaches are also highlighted to stimulate further advances in MS-based metabolomics in the field of MDD research.

Background – Mali was one of the first countries in sub-Saharan Africa to initiate a National Schistosomiasis Control Programme (NSCP) in 1982. The WHO's 2021-30 roadmap sets out criteria for eliminating and controlling schistosomiasis as a public health problem. Our study aimed to assess the impact of annual Mass Drug Distribution (MDD) with praziquantel (PZQ) among school-age children in the sentinel sites (SS) of the NSCP. Methods –The study took place at twelve SS in Kayes and Koulikoro regions. Two-round observational cross-sectional studies were carried out in December 2014-2015 and in April 2018 after four to five years of annually MDD. Overall, 2442 schoolchildren aged 7 to 14 were successfully examined. The urine filtration and Kato-Katz method were used for determining Schistosoma haematobium and S. mansoni eggs, respectively. Results –Of the twelve SS treated from 2014-2015, one has achieved the criterion of elimination of S. haematobium as a public health problem (prevalence of heavy intensity infection PHI < 1%) (ie, ≥50 S. haematobium eggs per 10 mL of urine or ≥400 S. mansoni eggs per g of stool), four met the morbidity control criterion (PHI< 5%) while two sites remained confined below the morbidity control criterion (PHI>5%). Five SS had no heavy intensity infection. The prevalence of S. mansoni was less than 1%. Conclusion –The impact evaluation of MDD with praziquantel in the SS of NSCP highlights that MDD has significantly reduced the PHI of schistosomiasis. However, the high prevalence of schistosomiasis or its increase in some sites requires in-depth studies.

Peptide mapping is an important tool to confirm the correct sequence expressed for a protein and to evaluate protein post-translational modifications (PTMs) that may arise during production, processing, or storage of protein drugs. Our new orally administered drug (Ab-1), a single-domain antibody, is highly stable and resistant to proteolysis. Analysis by the commonly used tryptic map method did not generate sufficient sequence coverage. Alternative methods were needed to study the Ab-1 drug substance (75 mg/mL) and drug product (3 mg/mL). To meet analytical needs, we developed two new peptide map methods with lysyl endopeptidase (Lys-C) digestion. These newly developed protein digestion protocols do not require desalting/buffer-exchange steps, thereby reducing sample preparation time and improving method robustness. Additionally, the protein digestion was performed under neutral pH with methionine acting as a scavenger to minimize artifacts, such as deamidation and oxidation, which are induced during sample preparation. Further, the method for low concentration samples performs comparably to the method for high concentration samples. Both methods provide 100% sequence coverage for Ab-1, and therefore, enable comprehensive characterization for its product quality attributes (PQA) assessment. Both methods can be used to study other antibody modalities.

Within the framework of the previously proposed formulation of the quantum theory of gravity in terms of world histories, it was suggested that the universe has its own mass. This quantity is analogous to the mass of a particle in relativistic mechanics. The mass of the universe is a distribution of non-zero values of gravitational constraints, which arises and changes in time as a consequence of the initial conditions for fundamental dynamic variables. A formulation of the Euclidean quantum theory of gravity is also proposed to determine the initial state, which can be the source of the universe’s own mass. Being unrelated to ordinary matter, the distribution of its own mass affects the geometry of space and forms a dedicated frame of reference. The existence of selected reference systems is taken into account by the corresponding modification of the system of quantum gravitational constraints. A variant of such a modification of the Wheeler-De Witt equation is the operator representation of gravitational constraints, which, together with the state of the universe, determines the parameters of the reference system in the form of a distribution of the spinor field on a spatial section.

Untargeted metabolomics is a powerful tool for measuring and understanding complex biological chemistries. However, employment, bioinformatics and downstream analysis of mass spectrometry (MS) data can be daunting for inexperienced users. Numerous open-source and free-to-use data processing and analysis tools exist for various untargeted MS approaches, including liquid chro-matography (LC), but choosing the ‘correct’ pipeline isn’t straight-forward. This tutorial, in con-junction with a user-friendly online guide presents a workflow for connecting these tools to process, analyse and annotate various untargeted MS datasets. The workflow is intended to guide explor-atory analysis in order to inform decision-making regarding costly and time-consuming down-stream targeted MS approaches. We provide practical advice concerning experimental design, organisation of data and downstream analysis, and offer details on sharing and storing valuable MS data for posterity. The workflow is editable and modular, allowing flexibility for updated/ changing methodologies and increased clarity and detail as user participation becomes more common. Hence, the authors welcome contributions and improvements to the workflow via the online repository. We believe that this workflow will streamline and condense complex mass-spectrometry approaches into easier, more manageable, analyses thereby generating opportunities for researchers previously discouraged by inaccessible and overly complicated software.

Octyl methoxycinnamate (OMC) is a common UVA and UVB filter molecule that is widely used is commercial sunscreens. Here, we use gas-phase laser photodissociation spectroscopy to characterize the intrinsic photostability and photodegration products of OMC, by studying the system as its protonated form, i.e. [OMC·H]+. The major photofragments observed have, m/z 179, 161, and 133, corresponding to fragmentation on either side of the of the ether oxygen of the ester group (m/z 179, and 161) or the C-C bond adjacent to the ester carbonyl group. Additional measurements were obtained using higher-energy collisional dissociation mass spectrometry (HCD-MS), to identify fragments which result from breakdown of the vibrationally hot electronic ground state. We found that the m/z 179 and 161 ions are the main fragments produced by this route. Notably, the m/z 133 ion was not observed through HCD-MS, revealing that this product ion is only produced through a photochemical route. Our results demonstrate that UV photoexcitation of OMC is able to access a dissociative excited state surface that uniquely leads to rupture of the C-C bond adjacent to the key ester carbonyl group.

Mass transfer is often the rate determining step for solid-liquid chemical reactions. Decrease of the concentration boundary layer thickness is essential to intensify the chemical reaction. Because the concentration boundary layer exists in the velocity boundary layer, force imposition in the concentration boundary layer by superimposing an electrical current and a magnetic field was proposed. Through, flow can be directly excited in the concentration boundary layer. The previous result indicates that by superimposing a DC current and a gradient magnetic field, the development of the concentration boundary layer was suppressed, because of a macro-scale flow excitation in the whole vessel. And by superimposing the gradient magnetic field with a modulate current, the development of the concentration boundary layer was further suppressed. This is because of the macro-scale flow enhancement and the excitation of a micro-scale flow near the solid-liquid interface. However, the mechanism for the micro-scale flow excitation has not been clarified. To clarify this, a uniform magnetic field was superimposed with the DC current or the modulate current. By this means, only the micro-scale flow was excited near the anode surface. The results found that the non-unform electromagnetic force distribution is the main reason for the micro-scale flow excitation.

Gas-liquid mass transfer is a significant issue in most bioprocesses. More importantly, gas-liquid mass transfer limitation requires further attention during syngas fermentation (SNF). The gas-liquid mass transfer of gaseous substrates (CO, CO2, and H2) into the fermentation broth is a rate-limiting step in SNF that leads to low productivity and poor economic feasibility. Enhancing this process during SNF can result in high efficiency, better production of ethanol, as well as lower energy consumption. While pressure and power input are important factors for improving reactor design, adding magnetic nanoparticles (MNPs) in the liquid phase is critical to achieving an enhanced gas-liquid mass transfer. The present study reviewed recent advances in the application of MNPs for an improved gas-liquid mass transfer during syngas fermentation. A brief overview of SNF and the effects of MNPs on SNF process are outlined. In addition, the hydrodynamic effect at the gas-liquid boundary is also seen as a mechanism in which nanoparticles increase mass transfer, and the mechanism is elucidated in detail.

Being a valuable source of inulin, fructose and pectin, Jerusalem artichoke (Helianthus tuberosus L.) is one of the most promising bioenergy crops for common usage. Animals have been reported to eat both Jerusalem artichoke green mass and tubers with pleasure. On the one hand, Jerusalem artichoke is cultivated on the area of about 3 thousand hectares in Russia. On the other hand, there are more than 200 crop species. So it is critical to choose a proper variety suitable both for soil and climatic conditions. The purpose of the research is to study Jerusalem artichoke, taking into account varietal characteristics appropriate for forage production. Research objects – varieties of Jerusalem artichoke: early ripening Skorospelka (RF); mid-early Vylgortskiy (RF); mid-season Dieticheskiy (RF), Kaluzhskiy (RF), Korenevskiy (RF), Nadezhda (RF), Nakhodka (RF), Podmoskovniy (RF), Sireniki (RB), Blank Brekos (France), Violet de Rense (France); late ripening Interest (RF), Interest 21 (RF), Novosti VIRa (RF), Tadzhikskiy Krasniy (USSR), Spindle (Germany). The soil for evaluating Jerusalem artichoke varieties was from experimental plot base "Korenevo". It is characterized as sod-slightly podzolic sandy loam. The field trial was established and the records and observations were carried out in accordance with the requirements of the field experiment methodology (1985), and the Program and methodology for evaluating Jerusalem artichoke varieties in test nurseries (2014). The varieties Vylgortskiy, Dieticheskiy, Nadezhda, Nakhodka, Sireniki, Skorospelka, Blank Brekos and Kaluzhskiy were found to reach due height of 155 - 170 cm at the end of the growing season; the varieties Podmoskovniy, Interest reached proper height of 175 - 208 cm; the varieties Interest 21, Tadzhikskiy and Violet de Rense were about 220 - 235 cm in hight; as for the varieties Korenevskiy, Novost VIRa, Spindlу their hight was 270 - 280 cm. According to aggregate amount of feed units per 1 ha, the following varieties have been shown to be the most reasonable for fodder production: Novost VIRa (22,438 fodder units), Nadezhda (19,928 fodder units), Korenevskiy (17,798 fodder units), Shpindle (16,887 fodder units), Dieticheskiy (16,395 fodder units), and Interest (16,116 fodder units). The highest total coefficient of energy efficiency has been found in the following varieties: Novost VIRa – 3.09, Tadzhikskiy – 2.78; Spindle – 2.68; Korenevskiy – 2.43; Interest – 2.10; Skorospelka – 1.98. The results of experimental and theoretical studies obtained were verified on-the-farm conditions based on a seed-speciality farm LLC Kaluga-Agro (the Kaluga region) and demonstrated beneficial effect.

Trypanosome brucei, the causative agent of African sleeping sickness, harbours a highly ordered, subpellicular microtubule cytoskeleton that defines many aspects of morphology, motility and virulence. This array of microtubules is associated with a large number of proteins involved in its regulation. Employing proximity-dependent biotinylation assay (BioID) using the well characterized cytoskeleton-associated protein CAP5.5 as a probe we identified CAP50 (Tb927.11.2610). This protein colocalizes with the subpellicular cytoskeleton microtubules but not with the flagellum. Depletion by RNAi results in defects in cytokinesis, morphology and partial disorganization of microtubule arrays. Published proteomics data indicate a possible association of CAP50 with two other, yet uncharacterized, cytoskeletal proteins, CAP52 (Tb927.6.5070) and CAP42 (Tb927.4.1300), which were therefore included in our analysis. We show that their depletion causes phenotypes similar to those described for CAP50 and that they are essential for cellular integrity.

Chemical simulants have long been used in human trials of mass decontamination to determine the efficacy of decontamination interventions against more toxic agents. Until now, reliance has mostly been on individual chemicals as surrogates to specific agents (e.g. methyl salicylate for sulphur mustard). A literature review was conducted to identify chemicals that had been previously tested on human volunteers and that represent diverse physicochemical characteristics in order to create a repository for chemical simulants. Of the 171 unique chemicals identified 78 were discounted for the risk they could pose to human volunteers, 39 were deemed suitable for use and a further 54 were considered to be possible simulants but would require further research. Suitable simulants included both solid and liquid chemicals spanning a wide range of physicochemical properties including molecular weight, octanol/ water partition coefficient, vapour pressure and solubility. This review has identified an array of potential simulants suitable for use in human volunteer decontamination studies and is of relevance to future studies on systemic absorption and surface decontamination.

Despite the increasing number of individuals affected by Alzheimer’s disease (AD) every year, no effective therapy has been developed to treat this neurodegenerative disease yet. The current methods for AD diagnosis are effective for clinical confirmation of the disease only when symptoms become apparent, years after molecular damage started within the patients’ brains. As higher expression of a conformationally altered p53 has been correlated with AD, we developed a mass spectrometry-based method for highly sensitive, specific, and reproducible quantification of a p53 conformational variant in plasma samples of patients with known clinical outcome. In particular, we tested the prognostic performance of an AD-specific 2D3A8-immunoselected p53 peptide (AZ 284™) in different sets of individuals progressing from both cognitively unimpaired (CU) and mild cognitive impairment (MCI) patients progressing to AD dementia. Our data showed that quantitative analysis of AZ 284™ is a reliable tool for predicting AD progression up to 6 years prior to dementia onset with AUC >90%. Taken together, these results support the implementation of p53 conformational variant quantification as an affordable and powerful diagnostic tool for early, non-invasive AD diagnosis.

A given problem in physics can be solved if it is well formulated. Well formulated means that it has a bijective correspondence to physical reality. Mass Gap Problem has no bijective correspondence with the physical reality and is that’s why not solvable mathematically. It can be solved in the frame of quantum mechanics by the formulation of the photon’s mass accordingly to the Planck-Einstein relation.

Abstract: The paper defines the characteristics of two proto-quark stars (M_b=1.22M_? and M_b=1.62M_(?"\ " )) that were formed after the explosion of the supernova. It is assumed that the changes in the energy and lepton charge of the central regions of the pre-supernova star can be neglected during the implosion. The equation of state for hot quark matter is determined based on the MIT bag theory taking into account the presence of neutrinos. The possible maximum values of the central temperatures of these stars are determined. The energy of neutrinos in the studied proto-quark stars is of the order of 250-300 MeV. The decrease in the mass of these stars during cooling is about 0.16 for M_b=1.22M_? and 0.25 for M_b=1.62M_(?"\ " ).

COVID-19 pandemic provoked a number of restrictive measures, such as the closure or severe restriction of border transit for international trading traffic, quarantines and self-isolation. This caused a series of interrelated consequences that not only prevent or slow down the spread of disease, but also impact the medical systems’ capability to treat the patients and help their recovery. In particular, steeply growing demand for medical safety goods cannot be satisfied by regular suppliers due to the shortage of raw materials originating from other countries or remotely located national sources, under conditions of quarantined manpower. The current context inevitably brings back memories (and records!) of the situation 80 years ago, when WWII necessitated major effort directed at the rapid build-up of low cost mass production to satisfy all aspects of war-time need. In the present short report we document a successful case of fast mass-production of light transparent medical safety face shields (thousands per day) realized in Skolkovo Institute of Science and Technology (Skoltech) fabrication laboratory (FabLab). The demand for safety face shields by tens of hospitals in Moscow City and Region rapidly ramped up due to the need to protect medical staff during patient collection and transportation to hospitals, and within both the infected (“red”) and uninfected (“green”) zones. Materials selection for sterilizable transparent materials was conducted based on the analysis of merit indices, namely, minimal weight at given stiffness and minimal cost at given stiffness. Due to the need for permanent wear, design was motivated by low weight and comfortable head fixation, along with high production efficiency. The selection of minimal tooling in University fabrication workshops and the use of distributed volunteer labor are discussed.

In this study the tachyon-like Dirac equation, formulated by Chodos to describe superluminal neutrino, is solved. The analytical solutions are Gaussian wave packets obtained using the envelope method. It is shown that the superluminal neutrino behaves like a pseudo-tachyon, namely a particle with subluminal velocity and pure imaginary mass that fulfils the energy-momentum relation typical of classical tachyons. The obtained results are used to prove that the trembling motion of the particle position around the median, known as Zitterbewegung, also takes place for the superluminal neutrino, even if the oscillation velocity is always lower than the speed of light. Finally, the pseudo-tachyon wave packet is used to calculate the probability of oscillation between mass states, obtaining a formula analogous to the one obtained for the ordinary neutrino. This suggest that in the experiments concerning neutrino oscillation is not possible to distinguish tachyonic neutrinos from ordinary ones.

Both ricin and R. communis agglutinin (RCA120), belonging to the type II ribosome-inactivating proteins (RIPs-Ⅱ), are derived from the seeds of castor bean plant. They share very similar amino acid sequences, but ricin is much more toxic than RCA120. It is urgently necessary to distinguish ricin and RCA120 in response to public safety. Currently, mass spectrometric assays are well established for unambiguous identification of ricin by accurate analysis of differentiated amino acid residues after trypsin digestion. However, diagnostic peptides are relatively limited for unambiguous identification of trace ricin, especially in complex matrices. Here, we demonstrate a digestion strategy of multiple proteinases to produce novel peptide markers for unambiguous identification of ricin. LC-HRMS was used to verified the resulting peptides, among which only the peptides with uniqueness and good MS response were selected as peptide markers. Seven novel peptide markers were obtained from tandem digestion of trypsin and endoproteinase Glu-C in PBS buffer. From the chymotrypsin digestion under reduction and non-reduction conditions, eight and seven novel peptides were selected respectively. Using pepsin under pH 1~2 and proteinase K digestion, 6 and 5 peptides were selected as novel peptide markers. In conclusion, the obtained novel peptides from the established digestion methods can be recommended for the unambiguous identification of ricin during the investigation of illegal use of the toxin.

One of the richest natural sources of resveratrol - the rhizome of Reynoutria japonica in East Asia is a well-known traditional herb (Hu zhang) used in various inflammatory diseases, infections, skin diseases, scald, hyperlipidemia. Although, it has been recently included in the European Pharmacopoeia, still in Europe is an untapped resource. Some of the therapeutic effects are likely to be influenced by its antioxidant properties and this in turn is frequently associated with a high stilbene content. However, some literatures suggested that other compounds than stilbenes may add to the total antioxidant capacity. Hence, the aim of this research was to examine rhizomes of R. japonica and less studied, morphologically similar species, R. sachalinensis and R. x bohemica for their phytochemical composition and antioxidant activity and to clarify the relationship between the antioxidant activity and compounds by statistical methods. HPLC/UV/ESI-MS studies of three Reynoutria species revealed 171 compounds comprising stilbenes, carbohydrates, procyanidins, flavan-3-ols, anthraquinones, phenylpropanoids, lignin oligomers, hydroxycinnamic acids, naphthalenes and their derivatives. Our studies confirmed the presence of procyanidins with high degree of polymerization, up to decamers in the rhizomes of R. japonica and brings new data on the presence of these compounds in other Reynoutria species. A procyanidin trimer digallate was described for the first time in the studied plants. Moreover, we suggested a presence of new for these species, dianthrone glycosides and previously unrecorded phenylpropanoid disaccharide esters and hydroxycinnamic acid derivatives, mainly in R. sachalinensis. Furthemore, compounds tentatively annotated as lignin oligomers were observed for the first time in studied species. The rhizomes of all Reynoutria species exhibited strong antioxidant activity. Statistical analysis demonstrated that proanthocyanidins should be considered as important contributors to the total antioxidant capacity.

This paper deals with the analytical modeling and control of rectilinear snake robots. During recent times snake robots have created much interest among researchers. The rectilinear pattern gait is one of the four biological snake locomotion modes. Rectilinear snakes have been widely used in rescue operations especially in rough terrains especially in narrow spaces where human intervention is not easy. Computational analysis of rectilinear motion is done using MATLAB.

The objective of this study was to investigate the relationship between coffee consumption and obesity in Korean women. We included 5,995 women who participated in a health screening examination at the Korean National Cancer Center between 2007 and 2016. Daily coffee consumption was evaluated using the food frequency questionnaire. Obesity was assessed by body mass index (BMI), and abdominal obesity was assessed by waist circumference (WC). A multiple logistic regression model was used to calculate the odds ratio (OR) of obesity according to coffee consumption. After multivariate adjustment, high coffee consumption was positively associated with obesity measured by BMI (≥ 3 cups vs. no drinks, OR = 2.52; 95% confidence interval (CI) = 1.91-3.34; P for the trend < 0.001) and abdominal obesity measured by WC (≥ 3 cups vs. no drinks, OR = 2.11; 95% CI = 1.59-2.79; P for the trend < 0.001). The positive association between daily coffee consumption and obesity prevalence was not altered by menopause. The amount of coffee consumed per day by Korean women was positively correlated with the prevalence of obesity, but the mechanism underlying this phenomenon remains to be elucidated.

In this work, we experimentally investigate mass and heat transport phenomena in a modular device while converting a solution salinity difference into a temperature difference. Operations occur under fixed total ambient pressure and without mechanical moving parts, thus realizing a fully static conversion. Provided that a constant salinity gradient can be imposed, the proposed device is able to generate a steady cooling capacity. Here, we purposely operate with environmentally benign and easily accessible sodium chloride water solutions only. A numerical model is finally elaborated, validated and used to explore a wider range of possible device configurations and operating conditions.

The increasing environmental awareness and carbon-storing capability of wood have amplified its relevance as a building material. The demand for high-quality wood species necessitates exploring alternative, underutilized wood sources due to limited forest areas and premium wood volume. Consequently, the veneer-based industry is considering lower-value hardwood species like grey alder, black alder, and aspen as substitutes for high-quality birch. Initially less appealing due to their lower density and mechanical properties, these species show promise through densification, which enhances their density, strength, and hardness. This study aims to enhance plywood screw withdrawal capacity and surface hardness by densifying low-density wood species and using them in plywood face veneer layers or all layers. The relationship between wood density, surface hardness, and screw withdrawal capacity of plywoods made of low-value species like aspen and black alder is examined. Experimental work with a pilot-scale veneer and plywood production line demonstrates improved surface hardness (65% and 93% for aspen and black alder, respectively) and screw withdrawal capacity (16% and 35% for aspen and black alder, respectively) in face veneer densified low-value hardwood plywood. This research highlights the potential of densified low-value wood species to meet construction requirements, expanding their practical applications.

A modification to the conventional spark plasma sintering (SPS) process was undertaken to allow edge-free deformation of grains longitudinally to the loading axis in a process termed spark plasma texturing (SPT). The resulting Al7075 SPT compact was compared to SPSed Al7075 in terms of densification behaviour, microstructural evolution, and mechanical properties. The result reported herein highlights the unique benefits of the SPT technique and potential application in the manufacturing of advanced materials.

The use of tuning forks to measure fluid density and viscosity is widely employed in fields such as food, medicine, textiles, automobiles, petrochemicals, and deep drilling. The explicit analytical model based on Euler-Bernoulli cantilever beam theory for the relationship between tuning fork resonance characteristics and the density and viscosity of fluid is only applicable to the situation where the fluid viscous effect is very small. In this paper, the finite element method is used to simulate the influence of large variations in fluid density and viscosity on the resonance characteristic parameters (resonant frequency and quality factor) of the tuning fork. The numerical simulation results are compared with the analytical analysis results and experimental measurement results. Then, the sensitivity of tuning fork resonance characteristic parameters to fluid density and viscosity is studied. The results show that compared with the analytical results, the numerical simulation results have a higher degree of agreement with the experimental measurement results. The relative difference in resonant frequency is less than 2%, and the relative difference in quality factor is less than 4%. This indicates that the finite element method includes the influence of fluid viscosity on tuning fork resonance parameters, which is more in line with the actual conditions than the analytical model. Simulating and analyzing the sensitivity of the tuning fork to fluid density and viscosity by the finite element method, it is possible to consider the situation where fluid density and viscosity vary over a large range. Compared with experimental measurements, this method has higher efficiency and can significantly save time and economic costs. This study can overcome the limitation of existing explicit analytical models, which are only applicable when the viscous effects of the fluid are very small. It enables a more accurate simulation of the coupling vibration between tuning forks and fluids, thereby providing theoretical references for further optimizing tuning fork structural parameters to enhance the accuracy of measuring fluid characteristic parameters.

Hydrogen is now recognized as the primary alternative to fossil fuels due to its renewable, safe, high energy density and environmentally friendly properties. Efficient hydrogen production through water splitting has laid the foundation for sustainable energy technologies. However, when hydrogen production is scaled up to industrial levels, operating at high current densities introduces unique challenges. It is necessary to design advanced electrocatalysts for hydrogen evolution reaction (HER) under high current densities. This review will briefly introduce chal-lenges posed by high current densities on electrocatalyst, including catalystic activity, mass dif-fusion and catalyst stability. In an attempt to address these issues, various electrocatalyst design strategies are summarized in detail. In the end, our insights into future challenges for efficient large-scale industrial hydrogen production from water splitting are presented. This review is expected to guide the rational design of efficient high current density water electrolysis electro-catalysts and promote the research progress of sustainable energy.

The performance of Yttrium-Barium Copper Oxide (YBCO) high-temperature superconductors in high-frequency applications is significantly affected by the microwave surface resistance (Rs). The paper delves into the basics, measuring methods and factors affecting the resistance (Rs) in YBCO, highlighting its high critical temperature (Tc) and low resistance, positioning it as a promising material. YBCO's compatibility with epitaxial growth and microstructure engineering offers opportunities to reduce grain boundary effects and improve Rs, making it advantageous for high-frequency electronics, communication systems, and MRI coils. This is due to its high critical current density (Jc) and exceptional Rs at practical temperatures. Challenges remain in comprehending and managing Rs in YBCO, despite its favorable characteristics. Utilizing advanced fabrication methods and incorporating nanotechnology allow for customization of YBCO-based devices. Multi-scale modeling and simulation are essential for guiding experimental work and understanding YBCO's performance in high-frequency settings. This study highlights the promise of YBCO for future high-frequency technologies and stresses the importance of more research to overcome hurdles and fully exploit its capabilities, potentially transforming superconducting devices for practical use.

This paper concentrates on the general birth-death processes with two different types of catastrophes. The Laplace transform of transition probability function for birth-death processes with two-type catastrophes are is successfully expressed with the Laplace transform of transition probability function of the birth-death processes without catastrophe. The first effective catastrophe occurrence time is considered. The Laplace transform of its probability density function, expectation and variance are obtained.

Two beneficial characteristics of aircraft generators are having armature windings and PM excitation sources placed on the stator side (maintenance and thermal management) and having a clear-cut rotor without permanent magnets or excitation windings (vulnerable at high speeds due to associated centripetal mechanical stresses). Within this framework, a doubly-salient permanent magnet (DSPM) generator was conceived by optimizing the stator size and rotor structure to minimize the torque ripple and maximize the RMS voltage value per turn of each generator phase. A Multi-Objective Design Strategy based on a 2D finite element analysis was used, being set to have characteristics closest to optimal for a Boeing 767 turbine, that is, the necessary electromotive force for a required power of 90 kW at 3000 rpm, feeding a simplified Boeing 767 electrical power distribution system. The results show that the machine could not deliver the required power at 3000 rpm since the 2D finite elements analysis demonstrates that the 2D model gives optimistic results when compared with the 3D FEM model. However, with a 3D finite element analysis of the machine feeding the aircraft load, it was seen that the machine’s efficiency is 92%, suggesting this machine can be a plausible solution.

The possibility of using graphane monolayer crystals as the electrode material is becoming popular. Graphane is stable at room temperature and has large surface area, but its chemical inertness hinders its direct interactions with Li ions. In this study, we performed density functional theory calculations to study the energetic stability, structural and electronic properties of Li on graphane with various CH divacancy configurations (v12, v13 and v14 ). The results show that adsorption of Li atom reduces the formation energy of the CH divacancy configurations. The Li-v12 is most stable with the highest binding energy of 3.25 eV/Li and relaxes to in-plane with other C atoms. Altering the Li charge state to have Li−1-v12 or Li+1 -v12 affects the energetic stability and electronic characters of Li-v12 . The Li−1-v12 (Li +1-v 12 ) enhances (reduces) the binding force between Li and v 12 configuration, and furthermore it improves (deteriorates) the conductivity of the structure. Further investigation of graphane with vacancies is encouraged due to these intriguing observations, as it holds promise for potential utilization as an electrode material.

In the natural environment, sand accumulation and desertification can influence the efficiency of photovoltaic arrays. In this study, PV module output characteristics were examined under different sand particle size, varying sand densities and inclination angles, and at wind speeds of 5m/s, 10m/s, and 15m/s. Both theoretical and experimental results showed that the output power of the module declines with increasing sand density. As the sand particle size increases, the module maximum output power rises and then stabilizes. The two control variables, namely sand density and sand particle size, influence the module temperature and light transmittance distinctly. Contrary to the impact of sand density on the module filling factor curve, the module filling factor exhibits varying trends under different sand particle sizes. Additionally, the pattern of the module filling factor as a function of sand density contrasts with that of the module temperature under analogous conditions. Specifically, when the sand density on the PV module surface increases from 0 to 40g/m², there is a 32.2% reduction in maximum output power. At a wind speed of 15m/s, this reduction was found consistent across all wind speed categories. Furthermore, the trend of the module filling factor rel-ative to sand accumulation density contrasts with the module temperature trend under analogous conditions. Notably, the filling factor reached its apex at a sand accumulation density of 35g/m², which corresponded to the module temperature's nadir during the experiment.

This study examines the wind shear coefficient (WSC) values at three coastal wind sites located in the southern region of Balochistan, Pakistan: Pasni, Ormara, and Jiwani. These WSC values were obtained using 10-minute measured wind speed data at heights of 20, 40, and 60 meters above ground level (AGL). Since wind measurements are typically recorded at lower heights due to cost and resource constraints, extrapolation techniques were employed to estimate wind speeds at higher altitudes. However, using a constant WSC value for extrapolation may lead to significant errors between extrapolated and actual wind speed measurements, impacting the energy output of wind turbines. To evaluate the effect of WSC on energy yield, the study employed power curves and frequency distributions for 2MW and 1.5MW wind turbines. Additionally, wind power density was calculated using air density derived from measured air temperature and surface pressure data, covering two years period from November 2016 to August 2018. The overall mean WSC values were found to be 0.076 at Pasni, 0.094 at Jiwani, and 0.053 at Ormara. The study further investigated the seasonal, monthly, and diurnal variations of WSC. For assessing wind resources at a height of 60m, the study utilized Wind Roses, wind power density, and Weibull parameters. Comparing the actual WSC values presented in this paper with those obtained using the 1/7 power law and measured data at 60m AGL, the energy yield from the wind turbines showed reduced output and capacity factor.

The general-purpose Compact Muon Solenoid (CMS) detector at the Large Hadron Collider (LHC) at CERN includes the hadronic calorimeter to register the energies of the charged and neutral hadrons produced in the proton-proton collisions at the LHC at a center of mass energy 13.6 TeV. The calorimeter is located inside the superconducting solenoid of 6 m in diameter and 12.5 m in length creating the central magnetic flux density of 3.8 T. For operating optimally in the high pileup and high radiation environment of the High Luminosity LHC, the existing CMS endcap calorimeters will be replaced with a new high granularity calorimeter (HGCal) comprising of an electromagnetic and a hadronic section in each of the two endcaps. The hadronic section of the HGCAL will include 44 stainless steel absorber plates with a relative permeability value well below 1.05. The volume occupied by 22 plates in each endcap is about 21 m3. The calculation of the axial electromagnetic forces on the absorber plates is a crucial element in designing the mechanical construction of the device. With a three-dimensional computer model of the CMS magnet, the axial forces on each absorber plate are calculated and the dependence of forces on the central magnetic flux density value is presented. The method of calculation and the obtained results are discussed.

This study aims to assess the interface shear adhesion behaviour between compacted clay and a metallic surface. A new testing approach was developed in this study for this purpose. The proposed method is simple and requires neither advanced equipment nor special test procedures, and thus represents an improvement on existing practice in this field. The experimental program involves determining the interface shear adhesion strength of reconstituted Kaolin clay/metallic surface where the Kaolin clay testing specimens were compacted dynamically at different energy levels and moisture contents. In general, the results show that the interface shear adhesion strength increases as the dry density of the clay increases, whereas it decreases as the moisture content increases. Furthermore, the results in this study reveal a unique multistage interfacial shear adhesion strength behaviour as the moisture content changes that could be related to the compaction curve of the clay. The observed behaviour, in this study, could be interpreted in terms of the effect of clay dry density and moisture content on the contact area and moisture-induced capillary adhesion at clay particles-continuum interface surface.

Plasma plays an important role in semiconductor processes. With the recent miniature and integration, the control of plasma became essential for the success in critical dimension of a few nanometers and etch narrow and deep holes with high aspect ratios. Recently, the etching process has reached physical limitations due to a significant increase in wafer surface temperature under the elevated amount of RF power, affecting not only the warpage phenomenon but also etching uniformity and etching profiles. Therefore, the plasma characteristics are identified using invasive single Langmuir probe (SLP) for wafer temperature diagnosis. Optical data is obtained through a non-invasive optical emission spectroscopy (OES) and the plasma parameters are derived to compare and verify with the SLP. Two variables, electron temperature and electron density, are substituted for the heat flux formula to derive the heat flux according to its location. Using a wafer-type temperature sensor, check the derived heat flux values and compare trends. Such studies are expected to be able to calculate heat flux values in real time, anticipate wafer temperatures, and solve existing problems.

Nonparametric density estimation for nonnegative data is considered in a situation where a random sample is not directly available but the data are instead observed from the length-biased sampling. Due to the boundary bias problem of the location-scale kernel, the approach in this paper is an application of asymmetric kernel. Two nonparametric density estimators are proposed. The mean integrated squared error, strong consistency, and asymptotic normality of the estimators are investigated. Some simulations illustrate the finite sample performance of the estimators.

Voids in face-centered cubic (fcc) metals are commonly assumed to form by the aggregation of vacancies; however, the mechanisms of vacancy clustering and diffusion are not fully understood. In this study, we use computational modeling to provide a detailed insight into the structures and formation energies of primary vacancy clusters, mechanisms and barriers for their migration in bulk copper, and how these properties are affected at simple grain boundaries. The calculations were carried out using Embedded Atom Method (EAM) potentials and Density Functional Theory (DFT) and employed the Site-Occupation Disorder code (SOD), the Activation Relaxation Technique nouveau (ARTn) and the Knowledge Led Master Code (KLMC). We investigate stable structures and migration paths and barriers for clusters of up to six vacancies. Migration of vacancy clusters occurs via hops of individual constituent vacancies with di-vacancies having a significantly smaller migration barrier than mono-vacancies and other clusters. This barrier is further reduced when di-vacancies interact with grain boundaries. This interaction leads to the formation of self-interstitial atoms and introduces significant changes into the boundary structure. Tetra-, penta-, and hexa-vacancy clusters exhibit increasingly complex migration paths and higher barriers than smaller clusters. Finally, the direct comparison with the DFT results shows that EAM can accurately describe the vacancy-induced relaxation effects in the Cu bulk and in grain boundaries. Significant discrepancies between the two methods were found in structures with a higher number of low-coordinated atoms, such as penta-vacancies and di-vacancy absortion by grain boundary. These results will be useful for modeling the mechanisms of diffusion of complex defect structures and provide further insights into the structural evolution of metal films under thermal and mechanical stress.

The electrochemical CO2 reduction reaction can lead to high value-added molecules production while helping decrease anthropogenic CO2 emissions. Copper can reduce CO2 to more than thirty different hydrocarbons and oxygenates, but it lacks the required selectivity. We present a computational investigation of the role of nano-structuring and alloying in Cu-based catalysts on the activity and selectivity of CO2 reduction to one-carbon products: carbon monoxide, formic acid, formaldehyde, methanol, and methane. The adsorption, activation, and conversion of CO2 were computed on monometallic and bimetallic (decorated and core-shell) 55-atom Cu-based clusters. The dopant metals considered were Ag, Cd, Pd, Pt, and Zn, located at different coordination sites. The relative binding strength of the intermediates at different applied potentials were used to identify the optimal catalyst for the selective CO2 conversion to one carbon products. It was discovered that single atom doping with Cd and Zn is optimal for the CO2 to carbon monoxide conversion. The core-shell models with Ag, Pd, and Pt provided higher selectivity for formic acid and formaldehyde. The Cu-Pt and Cu-Pd showed lowest overpotential for methane formation.

Martensitic steels are used at a wide range of strength levels in environments which expose them to hydrogen or water vapor over a large range of partial pressures and temperatures. Hydrogen can cause catastrophic failures under many seemingly benign conditions. The effect of hydrogen on the dimension stability of high strength martensitic steels under such conditions has been poorly understood, and existing models do not seem to adequately account for it. Experiments were conducted to measure the variation in volume due to the uptake of hydrogen of such steels under near-ambient conditions, and the results were compared to theoretical estimates derived from the density of defects acting as hydrogen traps. Based on these results a new model for hydrogen embrittlement was developed. The hydrogen lattice dilation (HLD) model isolates volume expansion as a primary driver of hydrogen embrittlement. It provides and distinguishes two modes of failure acceleration: the fast, brittle, stress-intensity independent cracking under higher static crack loading, and a slower, highly stress-intensity dependent tearing mode at lower stress intensity. The relationship between the two is explained, as is how hydrogen absorption by defects accounts for the crack threshold and crack velocity of each.

Research have been conducted in many countries around the world to assess air quality during COVID-19 pandemic, especially during lockdown period, some of these studies found an increase or decrease in some pollutants. This paper investigates the impact of COVID-19 on seven air pollutants (i.e., PM_2.5, PM₁₀, NO₂, O₃, SO₂, H₂S, CO) from the period January 2020 to December 2020 in the State of Kuwait. Kuwait is a desert country located in the north-eastern part of the Arabian Peninsula, and the northeast of the Arabian Gulf (Persian as it is sometimes called). Several analytical methods were conducted, such as spatial analysis (spatial interpolation) to study the distribution of the studied variables. The data was also statistically analysed (time series analysis - Kernel density) to study the temporal changes. The analysis also included applying air quality index to the data. We found that concentrations for the pollutants decreased during the pandemic due to the decrease of anthropogenic sources including such as traffic and petroleum activities, but the concentration for PM_2.5 increased, mostly because of the transported dust coming with the northwest winds prevailing in Kuwait from the Arabian deserts and Iraq.

Cesiumtrifluoroacetate (CsTFA) is a key chemical for RNA-based stable isotope analyses to link the structure and function of microbial communities. We report a protocol to easily synthesize CsTFA from Cesiumcarbonate (Cs₂CO₃₎ and Trifluoroacetate (TFA) and show that self-synthesized CsTFA behaves similar to commercial CsTFA in the separation of isotopically labelled and unlabelled E. coli RNA.

Background: This study aims to investigate the effects of visual neurofeedback stimulation on the brain activity in overweight cases. The neuroscience studies indicated the personal decision about eating under the impact of environmental factors such as (visually, smelling, tasting) is related to neural activity of the prefrontal lobe of the brain. Therefore, there were many attempts to modify the food intake behavior in overweight cases through the stimulation of the prefrontal cortex. However, the empirical viewing of EEG-neurofeedback experiments has not explicated the details about the effect of the EEG-NF, the specificity of positive treatment effects remains in a challenging scope.Methods: This study is a cue-exposure EEG-NF experiment to verify the hypothesis of effecting the EEG-NF on the electrical activity of PFC and modifying the general symptoms of food intake behavior in overweight cases. Twenty-four individuals were recruited as participants for this study. These participants were assigned randomly into two groups; the EX-Group (N=12) enrolled in 8 sessions of the EEG-NF experiment, and the C-Group (N=12) was listed in no EEG-NF sessions. The participants provided researchers with a self-report questionnaire relating to their observation of general symptoms of food intake behavior, and EEG signals recordings into the pre and posts stimulation phase. The power spectral density (PSD) method was applied for EEG parameters extraction.Results: The results of a two-way analysis of variance (ANOVA) explained that a significant variation in variables between the two groups after the EEG-NF experiment. The analysis of the quantitative variables indicated that the effect of EEG-NF experiment was a significant decrement in EEG power bands which significantly influenced changing the median of self-report questionnaire responses that is related to general symptoms of food intake behavior.Conclusions: This study provides preliminary support for the therapeutic potential of EEG-NF experiment that targets the prefrontal cortex, to influence neural processes underlying food intake behavior in overweight cases.

Maize (Zea mays L.) production in West and Central Africa is constrained by drought, low soil-N and Striga infestation. Breeders in the region have developed and commercialized extra-early and early-maturing hybrids (E-EH and EH), which combine high yield potentials with tolerance/resistance to the three stresses. Hybrids of both maturity groups are new to the farmers; thus, the urgent need to recommend appropriate agronomic practices for these hybrids. We investigated the responses of four hybrids belonging to extra-early and early-maturity groups to plant density (PD) and nitrogen (N) application in five agroecologies. The EHs consistently out-yielded the E-EHs in all the five agroecologies. The hybrids showed no response to N-fertilizer application above 90 kg ha-1. All interactions involving N had no significant effect on all traits except in few cases. The E-EHs and EHs had similar response to PD; their grain yield decreased as PD increased. Contrarily, flowering was delayed and expression of some other agronomic traits such as plant and ear aspects became poorer with increased PD. Optimal yield was obtained at approximately 90 kg N ha-1 and 66,666 plants ha-1. Most of the measured traits indicated high repeatability estimates (i.e. ≥ 60) across the N levels, PDs and environments. Evidently, the hybrids were intolerant of high PD.

Binder jet printed components typically have low overall density in the green state and high shrinkage and deformation after heat treatment. It has previously been demonstrated that, by including nanoparticles of the same material in the binder, these properties can be improved as the nanoparticles can fill the interstices and pore throats between the bed particles. The beneficial effects from using these additive binder particles can be improved by maximising the binder particle size, enabling the space within the powder bed to be filled with a higher packing efficiency. The selection of maximum particle size for a binder requires detailed knowledge of the pores and pore throats between the powder bed particles. In this paper, a raindrop model is developed to determine the critical radius at which binder particles can pass between pores and penetrate the bed. The model is validated against helium pycnometry measurements and binder particle drop tests. It is found that the critical radius can be predicted, with acceptable accuracy, using a linear function of the mean and standard deviation of the particle radii. Percolation theory concepts have been employed in order to generalise the results for powder beds that have different mean particle sizes and size distributions. The results of this work can be employed to inform the selection of particle sizes required for binder formulations, to optimise density and reduce shrinkage in printed binder jet components.

Nicotine is a pharmacologically active component of tobacco which adversely affects the male reproductive system and fertility and Icariin (ICA) is the main active ingredient of Epimedium herba which has been used to treat several male reproductive problems. This study was aimed at investigating the protective or ameliorative effect of ICA against reproductive toxicity induced by intraperitoneal injection of nicotine in mice. Forty male mice were randomly divided into 4 groups: control, nicotine (0.75 mg/kg intraperitoneally), icariin (ICA, 75 mg/kg), and icariin plus nicotine (ICA + nicotine) group. After 35 days of treatment, the mice were weighed, sacrificed, and their reproductive organs were collected and examined for further studies. In the nicotine-treated group, epididymal sperm density and serum testosterone concentrations significantly decreased relative to the control group. Nicotine also caused oxidative damage as shown by significant reduction in the activities of antioxidant enzymes and an elevation in Malondialdehyde (MDA) levels. Icariin on the other hand, improved the reduction in sperm characteristics, hormone levels, and activities of antioxidant enzymes alterations observed in the nicotine treated mice. These findings indicate that the nicotine-induced reproductive toxicity and oxidative damages on male reproductive tissues can be effectively attenuated by icariin.

The objective of this study was to determine the association of physiological responses and root distribution patterns on yield of the second ratoon cane and the relationships among these traits. Seventeen sugarcane genotypes were planted in a randomized complete block design with four replications. The second ratoon crop was evaluated for germination percentage, cane yield, SPAD chlorophyll meter reading (SCMR), chlorophyll fluorescence, relative water content (RWC), specific leaf area (SLA) and stomatal conductance. Root length density (RLD) was evaluated by auger method. The root samples were divided into upper soil layer and lowers soil layers to study root distribution patterns. Sugarcane genotypes were significantly different for RLD, germination percentage and cane yield. Root distribution patterns were classified into three groups based on the RLD. High RLD between plants in the upper soil layers at 90 DAH was positively correlated with high germination, whereas high RLD between rows in the lower soil layers at 90 and 270 DAH was associated with high cane yield. RWC at 90 DAH and stomatal conductance at 180 DAH were closely related to germination percentage, whereas chlorophyll fluorescence and stomatal conductance at 180 DAH were closely related to cane yield.

The relative dislocation density of aluminum and copper samples is quantitatively measured using linear Resonant Ultrasound Spectroscopy (RUS). For each metallic group, four samples were prepared with different thermomechanical treatments in order to induce changes in their dislocation densities. The RUS results are compared with Nonlinear Resonant Ultrasound Spectroscopy (NRUS) as well as Second Harmonic Generation (SHG) measurements. NRUS has a higher sensitivity by a factor of two to six and SHG by 14% to 62%. The latter technique is, however, faster and simpler. As main a result we obtain a quantitative relation between the changes in the nonlinear parameters and the dislocation density variations, which in a first approximation is a linear relation between these differences. We also present a simple theoretical expression that explains the better sensitivity to dislocation content of the nonlinear parameters with respect to the linear ones. X-Ray diffraction measurements, although intrusive and less accurate, support the acoustics results.

β-dicalcium silicate (β-Ca₂SiO₄, or β-C₂S in cement chemistry notation) is one of the most important minerals in cement. An improvement of its hydration rate would be the key point for developing environmentally friendly cements with lower energy consumption and CO₂ emissions. However, there is a lack of fundamental understanding on the water/β-C₂S surface interactions. In this work we aim to evaluate the water adsorption on three β-C₂S surfaces at the atomic scale using density functional theory (DFT) calculations. Our results indicate that thermodynamically favorable water adsorption takes place in several surface sites, with a broad range of adsorption energies (−0.78 to −1.48 eV), depending on the particular mineral surface and adsorption site. To clarify the key factor governing the adsorption, the electronic properties of water at the surface were analyzed. The partial density of states (DOS), charge analysis, and electron density difference analyses suggest a dual interaction of water with β-C₂S (100) surface: a nucleophilic interaction of the water oxygen lone pair with surface calcium atoms, and an electrophilic interaction (hydrogen bond) of one water hydrogen with surface oxygen atoms. Despite the elucidation of the adsorption mechanism, no correlation was found between the electronic structure and the adsorption energies.

In mega cities such as Seoul in South Korea, it is very important to protect the city from the flooding even for the short time of period due to the enormous amount of economic damage. In impervious area of the city, stormwater pipe network is commonly applied to discharge rainfall to the outside of catchment. Therefore, the stormwater pipe network in urban catchment should be carefully designed to discharge the runoff quickly and efficiently. In this study, different types of structures in stormwater pipe network were evaluated using the relationship between the peaks rainfall and runoff in urban catchments in South Korea. More than 400 historical rainfall events were applied in five urban catchments to estimate peak runoff from different type of network structures. Linear regression analysis was implemented to estimate peak runoffs. The coefficient of determination of the regressions were higher than 0.9 which means the regression model represent very well the relationship between the two peaks. However, the variation of the prediction becomes large as the peak rainfall increases and the variation become even larger when the network structure is branched. Therefore, it depends on the structure of stormwater pipe network. When the water paths in the pipe network is unique (branched network), the increased amount of rainfall is congested around the rainwater inlets and the uncertainty of peak runoff prediction is increased. If there are many possible water paths depending on the amount of discharge (looped network), the increased rainfall is discharged more quickly through the many water paths. This can be a way to represent the reliability of the stormwater pipe network. The structures of stormwater pipe network is evaluated using drainage density which is the length of pipes over the unit catchment area and 95% confidence interval. As a result, the 95% confidence interval is increased as the drainage density is increased because the accuracy of peak runoff prediction is decreased. As mentioned earlier, because the looped networks have many alternative water flowing paths, elimination time of rainfall from the catchments become short, the 95% confidence interval become narrow, and the reliability of peak runoff prediction become high. Therefore, it is beneficial to install looped stormwater pipe network within the affordable budget. It is important factor to determine the amount of complexity in stormwater pipe network to decrease the risk of urban flooding.

Novel high energy density materials N14 (1,6-dihydro-1,2,3,3a,4,5,5a,6,7,8,8a,9,10,10a-tetradecazapyrene) and N18 (1,2,2a,3,4,4a,5,6,6a,7,8,8a,9,10,10a,11,12a-octadecazacoronene) were designed, and their structures, detonation performance and stabilities were calculated employing density functional theory (DFT). Calculations reveals that they have a good balance between high energy and stability. Their energy gaps between LUMO and HOMO are all lower than that of TATB, while their impact sensitivity h_50% is estimated close to that of RDX. Concerning energy, detonation performance of the N14 (P = 43.6 GPa, D = 10040 m/s, Q = 2214 cal/g) and the N18 (P = 37.4 GPa, D = 9400 m/s, Q = 2114 cal/g) are comparable to CL-20.

Deadwood represents a source of nutrients, carbon and water for metabolism within forest ecosystem. Nutrients are mobilized due to the decomposition of wood, which is a long-term process that can be best studied by analysing environmental data on a temporary scale. Our study provides physico-temporal data on the downed logs of three major tree species in European temperate forests: Abies alba Mill., Fagus sylvatica L. and Picea abies (L.) Karst. Time since death was obtained using tree censuses (repeated for 40 years) and dendrochronology for each single downed log, the oldest being 75 years old. Standard laboratory methods were used for the determination of wood density and moisture changes. F. sylvatica was decomposed rapidly in the initial phase – mass loss was 50% during the 5 years after death, while A. alba and P. abies lost 13% and 16%, respectively. Downed logs of F. sylvatica contained 391 kg of water per m³, while these of P. abies 279 kg. A log-transformed linear model was created that shows the dependence of time since death on mass loss. According to the model, F. sylvatica had the shortest total decomposition time (39 years), followed by A. alba (58 years) and P. abies (86 years).

The atherosclerosis, a chronic and inflammatory disease that occurs when there are high levels of low-density lipoprotein (LDL) on plasma. This important risk factor for development of cardiovascular disease (CVD) is the main cause of death worldwide. MicroRNAs have recently emerged as potential biomarkers and therapeutic target for lipid metabolism disorders. In this review, we will provide profile of surrounding miRNAs that have demonstrated being regulators of PCSK9, LDLR and APOB100 genes. Recent work has identified the mir-148, mir-128, mir-27a/b, mir-185, mir-301, mir-130 as important regulators of this pathway because they decrease supply of LDL receptors through interaction with PCSK9. Inhibition of LDLR expression cause elevation of plasma LDL levels which induces atherosclerosis. While mir-30c, mir-122, mir-34 decrease MTTP, which promotes degradation of APOB100 preventing assembly and secretion of VLDL. We conclude that, when overexpressed, mir-148a, mir128 and mir-27a/b, mir-122 and mir-34 are related to decrease in LDLR, facilitating occurrence of atherosclerosis. While mir-30 has been linked to decreased atherosclerosis. Detection of miRNAs profile could be used in the future as a biomarker for disturbs linked to c-LDL uptake and in future anti-miRNAs therapies may be used in the treatment of atherosclerosis.

In this paper, the synthesis of two novel luminescent Eu3+ ion complexes [Eu(TFT)3(phen) (1) and Eu(TFT)3(bpy)•Hex (2)] based on the combination of 2-(2,2,2-trifluoroethyl)-1-tetralone (TFT), containing n-donor ligands (1,10-phenanthroline or 2,2'-Bipyridine) and Eu3+ ion is reported herein, and their structural features are discussed on the basis of X-ray crystallographic and thermal analyses. We observed that the ligands transfer energy effectively to the metal center by fluorescence, IR and UV spectrograms studies. The structures and properties of complexes 1-2 were optimized by the DFT theoretical calculation, and the calculation results were consistent with the experimental X-ray structure data and spectral analysis.

Endometriosis is a prevalent chronic inflammatory disease characterized by a considerable delay between initial symptoms and diagnosis through surgery. The pressing need for a timely, non-invasive diagnostic solution underscores the focus of current research efforts. This study examines the diagnostic potential of the menstrual blood lipidome. The lipid profile of 39 samples (23 women with endometriosis and 16 patient of control group) was acquired using reverse-phase high-performance liquid chromatography-mass spectrometry with LipidMatch processing and identification. Profiles were normalized based on total ion counts. Significant differences in lipids were determined using the Mann-Whitney test. Lipids for the diagnostic model, based on logistic regression, were selected using a combination of variance importance projection filters and Akaike information criteria. Levels of ceramides, sphingomyelins, cardiolipins, triacylglycerols, acyl- and alkenyl-phosphatidylethanolamines, and alkenyl-phosphatidylcholines increased, while acyl- and alkyl-phosphatidylcholines decreased in cases of endometriosis. PE P-16:0/18:1 and CL 16:0_18:0_22:5_22:6 serve as marker lipids in the diagnostic model, exhibiting a sensitivity of 81% and specificity of 85%. The diagnostic approach based on dried spots of menstrual blood holds promise as an alternative to traditional non-invasive methods for endometriosis screening.

Anticipating and planning for the urgent response to large-scale disasters is critical to increase the probability of survival in these events. These incidents present various challenges that complicate the response, such as unfavorable weather conditions, difficulties in accessing affected areas, and the geographical spread of the victims. Furthermore, local socioeconomic factors such as insufficient prevention education, limited disaster assets, and inadequate coordination between public and private emergency services may complicate these situations. In large-scale emergencies, multiple hotspots are usually observed, which requires efforts to coordinate the strategic allocation of human and material resources in different geographical areas. Therefore, the precise management of these resources based on the specific needs of each area becomes fundamental. To address these complexities, this paper proposes a methodology that models these scenarios as an optimization problem, focusing on the location and allocation of resources in mass casualty incidents. The proposed case study is Mexico City in a post-earthquake scenario, using voluntary geographic information, open government data, and historical data from the September 19, 2017 earthquake. Additionally, it is assumed that the resources that require optimal location and allocation are ambulances, which focus on medical issues that affect the survival of victims. The designed solution involves the use of a metaheuristic optimization technique, along with a parameter tuning technique, to find configurations that perform at different instances of the problem, i.e., different hypothetical scenarios that can be used as a reference for future possible situations. Finally, the objective is to present the different solutions graphically, accompanied by relevant information to facilitate the decision-making process of the authorities responsible for the practical implementation of these solutions.

Ionic liquid MIE-NH2 displays a new role of development of modification of glycoproteins of lactoferrin through a reductive amination mechanism to synthesize versatile pharmaceuticals. This work introduces a new strategy of modification of Lactoferrin by using methylimidazolium N-ethylamine, this ionic liquid MIE-NH2 linked to N-glycans in Lactoferrin derivatives. Using UPLC/ESI-QTOF and MALDI-TOF mass spectrometry to perform and detect the modifying of ionic liquid-linked glycoproteins. Relevantly, modifying the lactoferrin by MIE-H2 as a small molecule of ion liquid lactoferrin (IL-Lf), which could be a potential antiviral drug and it is achieved by inhibiting various targets. The probability of the lactoferrin modified as a small IL-Lf-molecule to inhibit any of these targets was investigated to find out its potency as a SARS-CoV-2 inhibitor. Molecular docking disclosed the activity of modifying glycoproteins - small IL-Lf-molecules containing amino groups and interaction with targeted Mpro, RdRp, TMPRSS2, and PLpro. Clinically, this study shows the a volubility to provide small IL-Lf-molecules as significantly important drugs that target main protease (Mpro), RNA dependent RNA polymerase (RdRp), transmembrane protease serine 2 (TMPRSS2), and Papain-like protease (PLpro).

Significant advances in Penning trap measurements of atomic masses and mass ratios of the proton, deuteron, triton, helion, and alpha-particle have occurred in the last five years. These include a measurement of the mass of the deuteron against 12C with 8.5 x 10-12 fractional uncertainty; resolution of vibrational levels of H2+ as mass and the application of a simultaneous measurement technique to the H2+/D+ cyclotron frequency ratio, yielding a deuteron-proton mass ratio at 5 x 10-12; new measurements of HD+/3He+, HD+/T+ and T+/3He+ leading to a tritium beta-decay Q-value with an uncertainty of 22 meV, and atomic masses of the helion and triton at 13 x 10-12; and a new measurement of the mass of the alpha-particle against 12C at 12 x 10-12. Some of these results are in strong disagreement with previous literature values. Their impact in determining a precise proton/electron mass ratio and electron atomic mass from spectroscopy of the HD+ molecular ion is also discussed.

Cities are important sources of anthropogenic methane emissions. Municipal governments can play a role in reducing those emissions to support climate change mitigation, but they need information on the rate of emissions to context mitigation actions and track progress. Here, we examine the application of satellite data from the TROPOspheric Monitoring Instrument (TROPOMI) to estimate city-level methane emissions rates in a case study of the City of Calgary, Alberta, Canada. While satellites are touted as a global methane monitoring system, we found limited observational coverage over Calgary that precluded the reliability of measurement-based models to track the annual emissions. In this work, we integrated valid observations over three years (2020-22) and used mass balance modeling to derive a long-term averaged emission estimate. The column-averaged dry-air mole fraction (XCH4) enhancement over Calgary was small, 4.7 ppb, but within the city boundary, we identified local hot spots in the vicinity of known sources (wastewater treatment facility and landfills). The city-scale emissions estimate from mass balance was 215.4 ± 132.8 t/d CH4. This estimate is approximately four- and six-times larger than estimates from Canada's gridded national inventory report of anthropogenic CH4 emissions and the Emissions Database for Global Atmospheric Research (EDGAR v8.0), respectively. Valid observations are more common in warmer months and occur during a narrow daily overpass timeslot over Calgary – these effects may bias the emissions estimate. Overall, the findings from this case study highlight the challenge of deriving routine (sub-annual to annual) satellite-based estimates of city-scale methane emissions in similar geographic settings and suggest that more granular emissions inventories are needed to improve methane reporting.

A study was conducted on the power system of a forklift equipped with PEM fuel cells. A fuel cell assembly relies on several components for proper functioning, and among these, the air compressor holds paramount importance due to its significant energy consumption when compared to other Balance of Plant components. The air supply system, in turn, plays a critical role in ensuring the stable and efficient operation of the entire fuel cell system. To enhance system efficiency, we delved into the impact of varying the stoichiometric ratio of air and air pressure on the validated and optimized power module model. This investigation was carried out under real loading conditions, replicating the conditions experienced by the power module when fuel cells are in use within a forklift. The air compressor, being a pivotal component of a PEM fuel cell system, can be oper-ated at different excess air and pressure ratios, which in turn influence both the fuel cell's performance and the overall efficiency of the power module system. Our research focused on assessing the performance of polymer electrolyte membrane (PEM) fuel cells under different load cycles, adhering to the VDI60 requirements for forklift applications. This comprehensive examination encompassed the system's minimum and maximum load scenarios, with the primary goal of optimizing excess air and pressure ratio parameters, especially under dynamic load conditions. The results revealed that higher air pressures and lower excess air ratios were con-ducive to increasing system efficiency, shedding light on potential avenues for enhancing the performance of PEM fuel cell systems in forklift applications.

A structure based analysis of the pion’s decay path reveals that neutrinos can show up in three eigenstates. It requires a proper understanding of the nature of charged leptons, such as why the loss of binding energy stops the lepton generation at the tauon level. The analysis quantifies this binding energy in terms of the weak interaction strength as embodied by the weak interaction boson and the strength of the energetic background field as embodied by the Higgs boson. Next to this it is shown that a reconstruction of Fermi’s neutrino theory allows a quantitative assessment of the Fermi constant straightforwardly from the weak interaction strength. The article ends with the conclusion that neutrino oscillation is not a physical phenomenon, but, instead, a measurement interpretation induced from projecting the statistical behaviour of a multi-particle ensemble onto a single particle.

The effects of exogenous inorganic [i.e., nitrate (NO3-)/ammonium (NH4+)] and organic [i.e., glutamate (Glu)/argine (Arg)] N alone and in combination on the accumulation of proline (Pro) in rice plant under trivalent chromium [Cr(III)] stress were studied through the mass balance matrix model (MBMM). ‘NH4+’ application showed the largest contribution to the Pro content in rice shoots under different concentrations of Cr(III), followed by ‘NO3-’, ‘Arg’, and ‘Glu’ application respectively. While, ‘Arg’ application displayed the largest contribution to the Pro content in roots under Cr(III) stress, followed by ‘NH4+’, ‘Glu’, and ‘NO3-’ application. Among the combination cases of N sources used, the application of ‘NH4++Arg’ showed the greatest contribution to the Pro content in both roots and shoots of Cr(III)-treated rice seedlings, while the application of ‘NO3-+Glu’ showed the least contribution to the Pro content in rice seedlings under Cr(III) stress. Results from this study indicated that the level of indigenous Pro in rice seedlings is quite sensitive to Cr(III) stress under different N sources, and mathematical modeling showed a reliable result to estimate the relationship between Pro content and N source application in rice plants in response to Cr(III) exposure .