In-situ injection of steam for heating of the subsurface is an efficient method for the recovery of oil and gas from oil shale where permeability typically evolves with temperature. We reported measurements on Jimusar oil shales(Xinjiang, China) at different temperatures to 600℃ and under recreated in situ triaxial stresses to obtain permeability evolution with temperature and stress. Permeability of tight oil shales evolves with temperature to a threshold temperature and peak temperature. The threshold temperature was subjected to triaxial stresses. For Jimusar oil shale, the threshold temperature ranges from 200℃ to 250℃ at ground stress of buried depth of 500m and from 350℃ to 400℃ at buried depth of 1000m. The peak temperature was almost not subjected to triaxial stress and the range is from 450℃ to 500℃ for all Jimusar samples. Pyrolysis plays an important role in permeability evolution and fundamentally changes permeability tendency and magnitude. At high temperature permeability exhibits a little reduction due to stress effect but still remains a high level due to pyrolysis. The above results show that oil shale mass can change from tight porous media into highly permeable media and oil & gas can easily flow through oil shale stratum.

High-strength wastewaters from a variety of sources, including the food industry, domestic septage and landfill leachate, are often hauled to municipal wastewater treatment plants (WWTPs) for co-treatment. Due to their high organic loadings, these wastewaters can cause process upsets in both the WWTP’s liquid and solids treatment trains and consume organic treatment capacity, leaving less capacity available to service customers in the catchment area. A novel pre-treatment method, the Waste Activated Sludge-High Rate (WASHR) process, is proposed to optimize the co-treatment of high-strength wastewaters. The WASHR process combines the contact stabilization and sequencing batch reactor processes. It utilizes waste activated sludge from the municipal WWTP as its biomass source, allowing rapid start-up. Bench scale treatment trials of winery wastewater confirm the WASHR process can reduce loadings on the downstream WWTP’s liquid treatment and solids treatment trains. A case study approach is used to confirm the economic viability and environmental sustainability of the WASHR process compared to direct co-treatment using life cycle cost analyses and greenhouse gas emissions estimates.

Background Although high-density lipoprotein has cardioprotective effects, the association between serum high-density lipoprotein cholesterol (HDL-C) and hypertension is poorly understood. Objective We investigated whether low and high concentrations of HDL-C are associated with hypertension using a large healthcare dataset. Methods In a community-based cross-sectional study of 1,493,152 Japanese people aged 40–74 years who underwent a health checkup, blood pressures and clinical parameters, including nine HDL-C concentrations (20–110 mg/dL or over) were investigated. Results A crude U-shaped relationship was observed between the nine HDL-C concentrations and blood pressure in males (n = 830,669), while a left-to-right inverted J-shaped relationship was observed in females(n = 662,483). An age-adjusted logistic regression analysis showed J-shaped relationships (left-to-right inversion in females) between HDL-C and odds ratios for hypertension (≥140/90 mmHg), with lower limits of 60–79 mg/dL in males and 90–99 mg/dL in females, which were unchanged after adjusting for smoking, habitual exercise, alcohol consumption, and pharmacotherapy for hypertension, dyslipidemia, and diabetes. However, further adjustment for body mass index and serum triglyceride concentration revealed latent positive linear associations between HDL-C and hypertension, although the association between extremely high HDL-C (≥100 mg/dL) and hypertension was attenuated in non-alcohol drinkers. Conclusion Both low and extremely high HDL-C concentrations are associated with hypertension. The former association may be dependent on excess fat mass, which is often concomitant with low HDL-C, whereas the latter association may be dependent on frequent alcohol consumption.

Throughout history, the pursuit of diagnosing and predicting crop yields has evidenced genetics, environment, and management practices' intertwined roles in achieving food security. However, the sensitivity of crop phenotypes and genetic responses to weather and climate remains unclear, hampering the identification of the underlying abilities of plants to adapt to climate change. We hypothesize that the PAWN global sensitivity analysis (GSA) coupled with a genetic by environment (GxE) model -built of environmental covariance and genetic markers structures- can evidence the contributions of climate on the predictability of maize yields in the U.S. and Ontario, Canada (US-CA). The GSA-GxE modeling framework estimates the relative contribution of climate variables such as solar radiation, temperature, rainfall, and relative humidity on improving maize yield predictions in US-CA. We use an improved version of the Genomes to Fields (G2F) initiative multi-dimensional database to build the environmental covariance matrices for the proposed GSA-GxE framework. The PAWN indices show that the aggregated GxE model’s highest sensitivity levels over US-CA were attributed to solar radiation, temperature, rainfall, and relative humidity. In one-third of the locations, rainfall was the primary climate variable responsible for maize yield predictability. Also, a consistent pattern of top sensitivity indices by location indicates that Relative Humidity, Solar Radiation, and Temperature were distributed as the main or the second most relevant drivers of maize yield predictability.

Currently, the most promising work seems to be aimed not so much at the development of new drugs, but rather at creating ways of targeted delivery of existing drugs. In this paper, we show that polymeric micelles based on chitosan, heparin grafted with lipoic and oleic acids residues demonstrate the potential for doxorubicin delivery to tumors due to pH-, glutathione-sensitivity. Smart delivery systems use the Aikido principle, i.e. they target tumor cells according to their features. Natural polysaccharides (heparin and chitosan) provide the pH sensitivity of micelles: the release of doxorubicin (Dox) is enhanced in a slightly acidic environment (model tumor microenvironment). Fatty acid residues are necessary for the formation of micelles and solubilization of cytostatics in a hydrophobic core. Lipoic acid residues formed a labile S-S cross-linking between polymer chains (the first method), and also covalently attached doxorubicin molecules through glutathione-sensitive S-S bridges (the second option) – determine Redox sensitivity of micelles to tumors. The characterization of polymeric micelles and prodrugs (Dox-polymer) was carried out using FTIR spectroscopy. The release of doxorubicin from micelles occurs slowly (20% / 6h) in an environment with a pH of 7.4 and the absence of glutathione, while in a slightly acidic environment and in the presence of 10 mM glutathione, the rate increases up 6 times, with an increase in the effective concentration up to 5 times after 7 h. The permeability of free doxorubicin, micellar formulations (covalent S-S crosslinked and not) into Raji, K562, A875 cancer cells was studied using confocal laser scanning microscopy (CLSM), demonstrated an increase in the permeability of micellar formulations based on Dox. Thus, we have presented micellar formulations of doxorubicin for targeted delivery to tumor, what is important in the aspects of reducing non-target toxicity, increasing the selectivity of cytostatics against tumors and overcome multidrug resistance.

This article presents the suitability analysis of onshore wind farm sites using an AHP (Hierarchical Analysis Process) multi-criteria decision-making (MCDM) approach based on geographic information system modeling (GIS). This analysis is based on different technical aspects (wind speed, elevation, slope), economic (proximity to the electricity network, proximity to roads) and social (proximity to residential areas, population density). The introduction of the factor “population density” and the constraint “required area” rarely used in previous studies makes it possible to refine the results. The data is classified into several categories in a gradual manner, namely unsuitable (0); less suitable (1); suitable (2); highly suitable (3) and most suitable (4). The results of the study show us that the largest percentage relating to spatial coverage is observed in the “suitable” range with 50.89% and the corresponding TWPP (theoretical wind power potential) is 1377.926 GW; it is followed by “highly suitable” 5.67% and a TWPP of 153.652 GW; then “less suitable” with 1.04% and a TWPP of 28.163GW. No areas were identified in “most suitable” and finally the “unsuitable” range with 42.4%. The results show that the most favorable areas are located in the part of the far north of the country corresponding to the strong wind zone. The sensitivity analysis was carried out based on scenario tests (technical, economic and equal-weight) in order to give greater visibility of choice to the different stakeholders who would like to invest in onshore wind energy in Cameroon. This study is useful in more than one way because the results obtained can help investors, the government and other stakeholders to identify potential areas for the deployment of wind energy systems in Cameroon. Furthermore, a study of hybrid solar-wind systems could improve the efficiency of electricity parks in Cameroon.

In order to study the influence of falling rock shape on its rolling characteristics and realize the optimization of falling rock protection design, the following research was carried out. Design model experiments to explore the rolling characteristics of different shapes of rockfalls. Based on the experimental results, it was found that the slenderness ratio, center of gravity, and rotational inertia of the rockfalls can affect their rolling characteristics, leading to swaying and changing the rolling axis during the rolling process, thereby affecting their rolling speed. On this basis, the formation mechanism of rolling resistance is analyzed, and the main cause of energy loss is the rolling resistance arm formed with the rolling surface during rockfall rolling, and a shape parameter to quantify the rolling resistance is proposed. The parameters are substituted into the kinematic formula, in which the influence of the rockfall shape, slope and slope roughness on the rolling speed is considered. Combined with the offset and initial position of the rockfall, the formula can be used to calculate the rolling speed and impact energy in the rolling region and any position in the region. The calculation formula was validated using model experimental data, and the results showed that the error between the experimental and calculated values was small. The error was corrected based on the experimental data. After on-site testing and verification, it can provide reference for the management of rockfall disasters.

While considering the sensitivity over the parameter optimization, it is essential to determine which parameters have the most significant implications on model performance. This study focuses on the baseflow recession constant as one of the independent basin parameters to forecast low flows, perform hydrograph analysis, and calibrate rainfall-runoff models for significant improvement. Prior studies examined that the optimization of data adjustment parameters can improve the hydrological model performance and determine the minimum acceptable data length for data scarce regions using the Xinanjaing model. However, it is essential to pay special attention to the sensitivity of the recession constant, which can also impact the model performance during the data scarcity. Therefore, this study extends the research to comprehend the recession constant sensitivity over data adjustment parameters in the shorter datasets leading to more reliable parameter estimation. In terms of that, this study explores how recession constant affects hydrological parameter estimation on annual scale while keeping data adjustment parameters constant in continuous hydrological modeling, employing the Xinanjiang (XAJ) model as a case study. This study considered two approaches of recession constant (cg); (i) assessing the relationship between cg and the data adjustment parameter (Cep), for the 28-year datasets, (ii) investigating the significant impacts of the sensitivity of cg over Cep in shorter datasets which can affect the estimation of the acceptable minimum data length in the data scarce basins. The study underscores the importance of the recession constant sensitivity for reliable continuous hydrological model predictions, especially in data-scared areas. The study’s outcomes enhance the understanding of the importance of parameter sensitivity and its relationship in conceptual hydrological modeling during the data limitations.

The Chiltan Formation is a potential hydrocarbon-producing reservoir in the Indus Basin, Pakistan. However, its diagenetic alterations and heterogeneous behavior lead to significant challenges in accurately characterizing the reservoir and production performance. This manuscript aims to utilize Chiltan Limestone core samples to conduct a detailed analysis of the diagenetic impacts on reservoir quality. The formation evaluation was carried out through thin section analysis, SEM-EDS and FTIR investigation, as well as plug porosity and permeability measurements under different stress conditions. In results, Petrography revealed three microfacies with distinct diagenetic features and micro-nano fossil assemblages, including intraclasts, pelloids, bioclasts, and stylolites. Diagenesis has a significant impact on petrophysical properties, leading to increased reservoir heterogeneity. The specified depositional environment exposed the alteration of the Chiltan formation during distinct diagenetic phases in marine, meteoric, and burial settings. Pore morphology and mineralogy reveals complex micro-pore structure with various carbonate mineral phases and cement types in the formation samples. The average porosity and permeability of the core samples were found to be 3.4% and 0.449 mD respectively, indicating poor reservoir quality. Stress sensitivity was determined using Klinkenberg corrected permeability, which indicated a reduction in measured and absolute permeability due to increasing confining stress, further reducing the pore throat structure of the formation. In conclusion, the Chiltan formation possesses intricate reservoir heterogeneity and varied micro-pore structure caused by diagenesis and depositional settings. The formation is classified as a low-quality reservoir due to its non-uniform pore geometry, which exhibits low petrophysical properties resulting from overburden stress. The results of this study provide solid foundation in reservoir characterization and quality assessment which has implications for exploring and exploitation of indigenous resources.

Covid-19 pandemic has greatly affected the whole world since the beginning and it continues to affect it. The main aim of this study is to show how Covid-19 affect other mortal diseases; cancer, heart diseases, and diabetes in near future. With this purpose two mathematical models are proposed via Ordinary Differential Equations (ODEs); one for the relationship between Covid-19 and cancer and one for the relationship between Covid-19, diabetes and heart diseases. Afterwards, stability analyses of these models are demonstrated. In order to see the effect of parameters on the disease compartments, sensitivity analysis is applied. Results of sensitivity analysis revealed that huge percentage of people are still scared of visiting doctors and this may lead a massive increase in the diagnosis of other diseases for upcoming years. Moreover, figures displayed that there exists a relationship between diabetes and heart diseases. Especially, diabetes patients should be careful about their health situations and take care of their heart. In order to provide these, awareness of people should be developed.

This paper describes the optimal design of a miniature fiber-optic linear displacement sensor. It is characterized by its ability to measure displacements along a millimetric range with sub-micrometric resolution. The sensor consists of a triangular reflective grating and two fiber-optic probes. The measurement principle of the sensor is presented. The design of the sensor's triangular grating has been geometrically optimized by considering the step angle of the grating to enhance the sensor's resolution. The optimization method revealed a global optimum at which the highest resolution is obtained

To assess the impact of tourism on the incidence of HIV and AIDS using Malaysian epidemiological data over the period of 1986-2011 with additional consideration for newborns infected with HIV. A population-level mathematical model was used to investigate: i) the role of tourism in the spread of HIV and measures used to reduce HIV spread in Malaysia; ii) whether the stability of infectious disease transmission is dependent on the flow of visiting tourists. We first derived an equation for the reproduction number (R0) threshold to quantify the contagiousness of HIV in Malaysia. Sensitivity analyses were used to determine the effect of various parameters on HIV transmission with respect to the increase in tourism. Our findings suggest that a stable disease-free state is sustainable based on the low value of R0 was 0.0017. This result is encouraging from a public health perspective. Approximately 14% of outbound tourists who leave the country return infected with HIV and the difference between the rate at which tourists move to the susceptible category and the rate at which tourists leave the susceptible is category is 12%. Estimated parameters for the influx of tourist rates, δ=1.1540x10-3[1.1477x10-3 - 1.15954x10-3], δ1=7.7901x10-4[7.7867x10-4 - 7.79418x10-4], and δ2=1.4030x10-8[-7.2287x10-7-7.5096x10-7], significantly impacted the spread of HIV in Malaysia. Some significant adjustments were made to the expected parameters. The methods used are helpful to public health analyses and provide a framework for epidemiological modeling of HIV spread among tourists. The trend and magnitude of tourist inflows may be determinants in the incidence of HIV and AIDS in Malaysia.

Most of the literature on the optimization problem of transportation in supply chain networks (SCN) considered fixed costs (FC). However, in the practical applications of this problem it is important to study the effect of FC. This paper examines the impact of fixed cost increase as well as the variable cost on the optimization of a Two-Stage SCN. To do so, two mathematical models for mixed-integer nonlinear programming are developed. The first model optimizes fixed and variable costs in addition to the opening cost, whereas the second model only optimizes variable and opening costs. To evaluate the effect of considering FC on the optimization supply chain problem, four groups of instances are randomly generated, and solved using Lingo. The results of the two models are compared utilizing the average percentage deviation. In addition, sensitivity analysis is performed to determine the impact of changes in opening and variable costs on the considered optimization problem. The computational results and the sensitivity analysis show that the first model with minimized FC outperforms the second model, which does not consider the FC in minimization and FC affect the optimization.

Paper is a material whose mechanical properties are highly dependent on humidity and temperature. Which naturally also builds the relationship between the stiffness and strength of corrugated board and changing weather conditions. In this paper, attention is focused on the dependence of the physical properties of the cardboard on changes in humidity and temperature, which undergo dynamic fluctuations both during the production of corrugated board and during its storage. Two techniques were used to test this effect, namely numerical homogenization and global sensitivity analysis. Both methods were implemented to determine the theoretical relationships between the change in humidity and/or temperature in each layer of corrugated board and its global bending, compression and shear stiffness. The procedure was used to analyze different types of 5-ply and 3-ply cardboard. The obtained results allowed to build a complete map of the relationship between the change in humidity of selected layers and the strength characteristics of the full assembly.

The growing interest in heat-conducting nanofluids requires highly sensitive methods for analyzing thermal properties. Thermal-lens spectrometry, despite its advantages over classical methods, does not have a general approach to measuring and interpreting results for dispersed systems. In this paper, by the example of nanofluids of silicon oxide in water in a wide range of concentrations and sizes, the selection of measurement parameters for transient and steady-state thermal lensing is justified, and the interpretation of the results of thermal diffusivity measurements is substantiated. The features of measurements of thermal diffusivity by thermal lens spectrometry under stationary state for dispersed systems are considered. Using this approach, it is possible to detect and distinguish thermal effects with high accuracy. For dispersions of silicon oxide, with increasing concentration, the thermal diffusivity passes through a minimum. Silicon oxide dispersions can be used both as a coolant or as a heat-removing liquid by selecting the particle size and concentration.

Water resource management and flood forecasting are crucial societal and financial stakes requiring reliable predictions of flow parameters (depth, velocity), the accuracy of which is often limited by uncertainties in hydrodynamic numerical models. In this study, we assess the effect of two uncertainty sources, namely breach characteristics induced by overtopping and the roughness coefficient, on water elevations and inundation extent. A two-dimensional (2D) hydraulic solver was applied in a Monte Carlo integration framework to a reach of the Loire river (France) including about 300 physical parameters. Inundation hazard maps for different flood scenarios allowed highlighting the impact of the breach development chronology. A special attention was paid to proposing a relevant sensitivity analysis to exam the factors influencing the depth and extent of flooding. The spatial analysis of vulnerability area induced by a levee breach width exhibits that, with increasing the flood discharge, the rise of the parameter influence is accompanied by a more localized spatial effect. This argues for a local analysis to allow a clear understanding of the flood hazard. The physical interpretation, highlighted by a global sensitivity analysis, showed precisely the dependence of the flood simulation on the main factors studied, i.e. the roughness coefficients and the characteristics of the breaches.

The modeling and prediction of crop seed yield can be a vital improvement in the precision agriculture industry as it provides reliable assessments of the effectiveness of agro-traits. Here, multiple machine learning (ML) techniques are established for predicting sesame (Sesamum indicum L.) seed yield (SSY) and incorporating agro-morphological features. Models utilized for coupled PCA-ML (Principal component analysis-Machine Learning) methods were compared with original ML models to evaluate predicted efficiency. The Gaussian process regression (GPR) and Radial basis function neural network (RBF-NN) models exhibited the most accurate SSY predictions with determination coefficients or R2 values of 0.99 and 0.91, respectively. The root-mean-square error (RMSE) for the ML models fluctuated between 0 to 0.30 t/ha (metric tons/hectare) for the varied modeling process phases. Estimation of sesame seed yield with coupled PCA-ML models improved performance accuracy. The K-fold process suggested the utilization of datasets with the lowest error rates to ensure the continued accuracy of GPR and RBF models. Sensitivity analysis revealed the capsule number per plant (CPP), seed number per capsule (SPC), and 1000-seed weight (TSW) were the most significant seed yield determinants.

Wind energy in Europe is aimed to grow at a steady, high pace, but opposition from residents to local wind farm plans is one of the obstacles to further growth. A large body of evidence shows that local populations want to be involved and respected for their concerns, but in practice this is a complex process that cannot be solved with simple measures such as financial compensation. The visual presence and the acoustic impact of a wind farm is an important concern for residents. Generally environmental noise management aims to reduce the exposure of the population, usually based on acoustics and restricted to a limited number of sources (such as transportation or industry) and sound descriptors (such as Lden). Individual perceptions are taken into account only at an aggregate, statistical level (such as percentage of exposed, annoyed or sleep-disturbed persons in the population). Individual perceptions and reactions to sound vary in intensity and over different dimensions (such as pleasure/fear or distraction). Sound level is in fact a weak predictor of the perceived health effects of sound. The positive or negative perception of and attitude to the source of the sound is a better predictor of its effects. This article aims to show how the two perspectives (based on acoustics and on perception) can lead to a combined approach in the management of a wind farm aimed to reduce annoyance, not primarily of sound level. An important aspect in this approach is what the sound means to people: is it associated with the experience of having no say in plans, does it lead to anxiety or worry, is it appropriate? The available knowledge will be applied to wind farm management: planning as well as operation.

This paper proposes a curved link-slab (CLS) structure, simplified into a hingeless-arch model, to address the current cracking phenomenon of CLS concrete. The stress formula of the hingeless arch under various loads is derived based on the classical mechanic's method. Based on an actual bridge example, the mechanical properties of CLS are analyzed under different loads and load combinations. The results show that: (1) the CLS stress is significantly lower than that of the flat link-slab structure (FLS), (2) its stress values are less than the concrete tensile limit, and (3) the CLS can effectively solve the concrete cracking phenomenon on the link-slab. The rationality of the stress formula derived from the simplified model of the hingeless arch is verified using the finite element method (FEM). The parametric sensitivity analysis shows that variation of the reinforcement ratio of the CLS has a limited impact on it. Considering both the concrete tensile and compressive limit, the thickness of the CLS should be 15 cm to 20 cm, and its design span should be about 5% to7.5% of the main beam length.

Novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants of concern (VOC) are constantly threatening global public health. With no end date, the pandemic still persists with the emergence of novel variants that threaten the effectiveness of diagnostic tests and vaccines. Mutations in the Spike surface protein of the virus are regularly observed in the new variants, potentializing the emergence of novel viruses with different tropism from the current ones, which may change the severity and symptoms of the disease. Growing evidence has shown that mutations are being selected in favor of variants that are more capable of evading the action of neutralizing antibodies. In this context, the most important factor guiding the evolution of SARS-CoV-2 is its interaction with the host’s immune system. Thus, as current vaccines cannot block the transmission of the virus, measures complementary to vaccination, such as the use of masks, hand hygiene, and keeping environments ventilated remain essential to delay the emergence of new variants. Importantly, in addition to the involvement of the immune system in the evolution of the virus, we highlight several chemical parameters that influence the molecular interactions between viruses and host cells during invasion and are also critical tools making novel variants more transmissible. In this review, we dissect the impacts of the Spike mutations on biological parameters such as (1) increase of Spike binding affinity to hACE2; (2) bound time for the receptor to be cleaved by the proteases; (3) how mutations associate with increase of RBD up-conformation state in the Spike ectodomain; (4) expansion of uncleaved Spike protein in the virion particles; (5) increment of Spike concentration per virion particles; and (6) evasion of the immune system. These factors play key roles in the fast spreading of SARS-CoV-2 variants of concern, including the Omicron.

The current systematic review examines whether there is an association between the genetic 5-HTTPLR pol-ymorphism and parenting and the mechanisms by which this association operates. The literature was searched in various databases such as PubMed, Scopus and ScienceDirect. In line with our inclusion criteria, nine articles were eligible out of 22. Most of the studies, analysed in this review, found an association between 5HTTLPR and parenting. Four studies found a direct association between 5-HTTLPR and parenting with conflicting findings: two studies found that mothers carrying the short variant were more sensitive to their infants, while two studies found that parents carrying the S allele were less sensitive. In addition, several studies found strong interaction between genetic and environmental factors, such as childhood stress and disruptive child behaviour, quality of early care experiences, poor parenting environment, and quality of environment. Only one study found an association between children’s 5HTTLPR and parenting. Parenting can be described as a highly complex construct influenced by multiple factors, including environmental, parenting and child charac-teristics. According to the studies, maternal 5-HTTLPR polymorphism is most likely associated with sensitive parenting.

Helicobacter pylori is the most common human gastric infection. H. pylori stool antigen lateral flow immunochromatography assay (HpSA-LFIA) is considered one of the most cost-effective and rapid non-invasive assays (active tests). The evaluation of this test is crucial for accuracy and utility assurance. This study aimed to evaluate the polyclonal antibody-based HpSA-LFIA in comparison to a monoclonal antibody-based ELISA kit. Methodology: Stool samples were collected from 200 gastric patients for HpSA-LFIA and semi-quantitative HpSA-ELISA. Statistical analysis of the diagnostic values was performed using MedCalc software. Chi-square tests were used to determine the effects of gender and age. Results: The obtained results found that HpSA-LFIA achieved promising sensitivity (93.75%) and NPV (98.00%). However, it had poor specificity, PPV, and accuracy, respectively, 59.76%, 31.25%, and 65.31%. LR+ & LR- were 2.33% & 0.1%, respectively. Gender had no significance on the di-agnostic parameters of HpSA-LFIA. Age groups had irrelevant sensitivity; however, specificity was significantly higher in patients over 45 years. Conclusion: It was concluded that HpSA-LFIA was not accurate enough to be the sole test for di-agnosis and needs other confirmatory tests in case of positive conditions

The discovery of microRNAs (miRNAs) has fundamentally transformed our understanding of gene regulation. The competing endogenous RNA (ceRNA) hypothesis postulates that not only messenger RNAs but also other RNA transcripts, such as long non-coding RNAs and pseudogenes, can act as natural miRNA sponges. These RNAs influence each other’s expression levels by competing for the same pool of miRNAs through miRNA response elements on their target transcripts, thereby modulating gene expression and protein activity. In recent years, these ceRNA regulatory networks have gained considerable attention in cancer research. Several studies have identified cancer-specific ceRNA networks. Nevertheless, prior bioinformatic analyses have focused on long non-coding RNAs-associated ceRNA networks. Here, we identify an extended-ceRNA network (including both long non-coding RNAs and pseudogenes) shared across a group of four hormone-dependent (HD) cancers, i.e., prostate, breast, colorectal, and endometrial cancers, using data from The Cancer Genome Atlas (TCGA). We performed a functional enrichment analysis for differentially expressed genes in the shared ceRNA network of HD cancers, followed by a survival analysis to determine their prognostic ability. We identified two long non-coding RNAs, nine genes, and seventy-four miRNAs in the shared ceRNA network across four HD cancers. Among them, two genes and forty-one miRNAs were associated with at least one HD cancer survival. This study is the first to investigate pseudogene associated ceRNAs across a group of related cancers and highlights the value of this approach to understanding shared molecular pathogenesis in a group of related diseases.

As fossil-fueled heating in the building sector is responsible for 16 % of Germanys total CO2 emissions, it is of great importance to use climate-neutral alternatives for the decarbonization of this sector. Options for the climate-neutral heating of buildings include electricity or hydrogen as energy carriers, both explicitly considered by German policy. In this paper, bottom-up studies are conducted to investigate the role of hydrogen for the climate-neutral energy supply of ten selected residential buildings in comparison to electricity-based systems. Based on a selection of as different typical buildings as possible for single- (SFH) and multi-family houses (MFH) of different construction years, demand profiles are simulated for each building and the respective cost-optimal supply system is determined. For the construction of this system, the electricity-based technologies available are electric heater and heat pump as well as the hydrogen-based technologies hydrogen boiler and fuel cell combined heat and power (CHP) system. Based on the results of the optimization, sensitivity analyses are performed. These analyses aim to identify threshold values of the hydrogen price for the use of hydrogen in building energy systems as well as to make the quantities of hydrogen consumed visible.The identified threshold values show the significant role of hydrogen-operated CHP in MFH if the hydrogen price reaches 0.17 €/kWh_H2 in 2050 at an electricity price of 0.31 €/kWh_el. So, hydrogen-based energy systems represent an economically viable alternative to electricity-based systems with heat pumps. We identify electricity to hydrogen price ratios for the economically viable use of hydrogen in the examined buildings that range from 1.67 to 2.82. According to these ratios, the economically reasonable use of hydrogen in buildings can be derived. For the individual building groups for the year 2050, a ratio of 2.5 can be determined for SFH and 1.8 for MFH, that is favored by the use of CHP which also supplies electricity to the buildings. However, the role hydrogen will finally play in German residential buildings in the future depends to a large extent on political decisions on distribution issues and price signals.

Immunostaining is an essential histochemical technique for analyzing pathogenesis and making a histopathological diagnosis. The needs are prompted by technical development and refinement, commercial availability of a variety of antibodies, deepened knowledge of immunohistochemical markers, accelerated analysis of morphofunctional correlations, progress in molecular target therapy, and the expectation of advanced histopathological diagnosis. However, immunostaining does have various pitfalls and caveats. We should learn from mistakes and failures, as well as from false positivity and false negativity. The present review article describes various devices, technical hints and trouble-shooting guides to keep in mind in performing immunostaining.

Background: Flow-through dot-blot assay (FT-DBA) for SARS-CoV-2 specific IgG detection will provide a reliable and affordable immunoassay for the rapid serosurveillance against COVID-19. Method: SARS-CoV-2 antigens were immobilized on nitrocellulose membrane to capture IgG immunoglobulins, which were then detected with AuNP anti-human IgG. A total of 181 samples were characterized with in-house and commercial immunoassay. The positive panel consisted of RT-PCR positive samples from patients with both <14 days and >14 days from the onset of symptoms, while the negative panel contained samples collected either from the pre-pandemic era dengue patients from healthy donors during the pandemic period. Results: In-house ELISA selected a total of 79 true seropositive and 100 seronegative samples. The sensitivity of samples with <14 days using FT-DBA was 94.7% which increased to 100% for samples >14 days. The overall detection sensitivity and specificity were 98.8% and 98%, respectively, whereas the overall PPV and NPV were 97.6% and 99%. Moreover, comparative analysis between ELISA and FT-DBA revealed clinical agreement of Cohen’s Kappa value of 0.944. Conclusion: The assay can confirm past SARS-CoV-2 infection with high accuracy within 2 minutes compared to ELISA. It can help track SARS-CoV-2 disease progression, population screening, and vaccination response.

Global population is predicted to approach 10 billion by 2050, an increase of over 2 billion from today. To meet the demands of growing, geographically and socio-economically diversified nations, we need to diversity and expand agricultural production. This expansion of agricultural productivity will need to occur under increasing biotic, and environmental constraints driven by climate change. Clustered regularly interspaced short palindromic repeats-site directed nucleases (CRISPR-SDN) and similar genome editing technologies will likely be key enablers to meet future agricultural needs. While the application of CRISPR-Cas9 mediated genome editing has led the way, the use of CRISPR-Cas12a is also increasing significantly for genome engineering of plants. The popularity of the CRISPR-Cas12a, the type V (class-II) system, is gaining momentum because of its versatility and simplified features. These include the use of a small guide RNA devoid of trans-activating crispr RNA (tracrRNA), targeting of T-rich regions of the genome where Cas9 is not suitable for use, RNA processing capability facilitating simpler multiplexing, and its ability to generate double strand breaks (DSB) with staggered ends. Many monocot and dicot species have been successfully edited using this Cas12a system and further research is ongoing to improve its efficiency in plants, including improving the temperature stability of the Cas12a enzyme, identifying new variants of Cas12a or synthetically producing Cas12a with flexible PAM sequences. In this review we provide a comparative survey of CRISPR-Cas12a and Cas9, and provide a perspective on applications of CRISPR-Cas12 in agriculture.

Medical insurance claims are becoming increasingly common data sources to answer a variety of questions in biomedical research. Although comprehensive in terms of longitudinal characterization of disease development and progression for a potentially large number of patients, population-based studies using these datasets require thoughtful modification to sample selection and analytic strategies, relative to other types of studies. Along with complex selection bias and missing data issues, claims-based studies are purely observational, which limits effective understanding and characterization of the treatment differences between groups being compared. All these issues contribute to a crisis in reproducibility and replication of comparative findings. This paper offers some practical guidance to the full analytical process, demonstrates methods for estimating causal treatment effects on several types of outcomes common to such studies, such as binary, count, time to event and longitudinally varying repeated measures outcomes, and aims to increase transparency and reproducibility. We provide an online version of the paper with readily implementable code for the entire analysis pipeline to serve as a guided tutorial for practitioners. The online version can be accessed at https://rydaro.github.io/. The analytic pipeline is illustrated using a sub-cohort of patients with advanced prostate cancer from the large Clinformatics TM Data Mart Database (OptumInsight, Eden Prairie, Minnesota), consisting of 73 million distinct private payer insurees from 2001-2016.

This brief note aims to explain the scope in conducting large-scale serological surveys of SARS-CoV-2 to define the landscape of population immunity without overlooking the inherent uncertainty steaming from sampling design and diagnostic validity. The note completes with a succinct statistical appendix of simple methods for estimating prevalence from random population samples using imperfect diagnostic tests.

Digital Elevation Models (DEMs) are essential in watershed delineation, but the sensitivity of simulated runoff to DEM resolution is poorly understood. This study investigates the impact of DEM resolution on topological attributes and simulated runoff in the Mahabad Dam watershed, Iran. To delineate the watershed, DEMs with 12.5 m, 30 m, and 90 m resolutions were acquired from the ALOS PALSAR, Space Shuttle Radar Topography Mission (SRTM), and ASTER global DEM data source, respectively. Watershed and streamlines were delineated in ArcGIS, with hydrologic analyses performed using the Soil and Water Assessment Tool (SWAT). Sensitivity analysis on parameters contributing to runoff was done using Sequential Uncertainties Fitting Ver-2 (SUFI-2) Algorithm, in SWAT Calibration and Uncertainty Procedures (SWAT-CUP) software. Results showed the watershed area, reach lengths, and elevations in the watershed varied due to DEM resolutions. Higher amounts of runoff were generated when DEMs with finer resolutions were implemented. The 12.5 m DEM generated 3.48% and 0.42% more runoff compared with 90 m and 30 m DEMs, respectively. SWAT-CUP results showed the sensitivity of parameters contributing to runoff changes under different DEM resolutions. Regardless of DEM resolution, surface properties, available water capacity, and moisture levels in the soil are the most sensitive parameters. As the distribution of slope changes in different DEM resolutions, surface parameters are most affected. The findings indicate to reduce computation time and speed up computation procedures, researchers may use DEMs with coarser resolutions at the expense of minor decreases in accuracy.

Using nanoindentation under various strain rates, the mechanical properties of a selective laser melted (SLM) SKD61 at the 800 mm/s scan speed was investigated and compared to SLM H13. No obvious pile-up due to the ratio of the residual depth (h_f) and the maximum depth (h_max) being lower than 0.7 and no cracking were observed on any of the indenter surfaces. The nanoindentation strain-rate sensitivity (m) of SLM SKD61 was found to be 0.034, with hardness increasing from 8.65 GPa to 9.93 GPa as the strain rate increased between 0.002 s⁻¹ and 0.1 s⁻¹. At the same scan speed, the m value of SLM H13 (m = 0.028) was lower than that of SLM SKD61, indicating that the mechanical behavior of SLM SKD61 was more critically affected by the strain rate compared to SLM H13. SLM processing for SKD61therefore shows higher potential for advanced tool design than for H13.

The active debate about the processes governing the organic-rich sediment deposition generally involves the relative roles of elevated primary productivity and enhanced preservation related to anoxia. However, other less spotlighted factors could have a strong impact on such deposits: e.g. residence time into the water column (bathymetry), sedimentation rate, transport behavior of organo-mineral floccules on the sea floor. They are all strongly interrelated and may be obscured in the current conceptual models inspired from most representative modern analogues (i.e. upwelling zones and stratified basins). To improve our comprehension of organic matter distribution and heterogeneities, we conducted a sensitivity analysis on the processes involved in organic matter production and preservation which have been simulated within a 3D stratigraphic forward model. The Lower-Middle Toarcian of the Paris Basin was chosen as a case study as it represents one of the best documented example of marine organic matter accumulation. The relative influence of the critical parameters (bathymetry, diffusive transport, oxygen mixing rate and primary production) on the output parameters (Total Organic Carbon, and oxygen level), determined performing a Global Sensitivity Analysis, shows that, in the context of a shallow epicontinental basin, a moderate primary productivity (> 175 gC.m^-².yr^-1) can led to local anoxia and organic matter accumulation. We argue that, regarding all the processes involved, the presence and distribution of organic-rich intervals is linked as a first-order parameter to the morphology of the basin (e.g. ramp slope, bottom topography). These interpretations are supported by very specific ranges of critical parameters which allowed to obtain output parameter values in accordance with the data. This quantitative approach and its conclusions open new perspectives about the understanding of global distribution and preservation of organic-rich sediments.

Hydrologic models are conventionally constrained and evaluated using point measurements of streamflow, which represents an aggregated catchment measure. As a consequence of this single objective focus, model parametrization and model parameter sensitivity are typically not reflecting other aspects of catchment behavior. Specifically for distributed models, the spatial pattern aspect is often overlooked. Our paper examines the utility of multiple performance measures in a spatial sensitivity analysis framework to determine the key parameters governing the spatial variability of predicted actual evapotranspiration (AET). Latin hypercube one-at-a-time (LHS-OAT) sampling strategy with multiple initial parameter sets was applied using the mesoscale hydrologic model (mHM) and a total of 17 model parameters were identified as sensitive. The results indicate different parameter sensitivities for different performance measures focusing on temporal hydrograph dynamics and spatial variability of actual evapotranspiration. While spatial patterns were found to be sensitive to vegetation parameters, streamflow dynamics were sensitive to pedo-transfer function (PTF) parameters. Above all, our results show that behavioral model definition based only on streamflow metrics in the generalized likelihood uncertainty estimation (GLUE) type methods require reformulation by incorporating spatial patterns into the definition of threshold values to reveal robust hydrologic behavior in the analysis.

The value of QuantiFERON in the diagnosis of tuberculosis and in the monitoring of the response to anti-tuberculosis treatment is unclear. The aims of this study were to evaluate the accuracy of the QuantiFERON-TB Gold In-Tube (QFT-GIT) test in the diagnosis of tuberculosis and in the monitoring of the response to anti-tuberculosis treatment in patients with active pulmonary tuberculosis (PTB). Between January 2013 and December 2015, 128 cases with active PTB and 128 controls with no mycobacterial infection, matched by age (within 3 years) and by the week that they visited Tainan Chest Hospital, were enrolled in the study. Serial testing by QFT-GIT at baseline and after 2 and 6 months of treatment was performed. At these time points, a comparison of the performance of QFT-GIT with that of sputum culture status among study subjects was conducted. Compared to baseline, 116 (87.2%) cases showed a decreased response, whereas 17 (12.8%) showed persistent or stronger interferon-gamma (IFN-γ) responses at 2 months. Their IFN-γ responses declined significantly from baseline to 2 months (median, 6.32 vs. 4.12; P < 0.005). The sensitivity values of the QFT-GIT test for the detection of pulmonary tuberculosis at cut-off points of 0.35 IU/ml, 0.20 IU/ml, and 0.10 IU/ml were 74.4%, 78.2%, and 80.5%, respectively. The specificity values at cut-off points of 0.35 IU/ml, 0.20 IU/ml, and 0.10 IU/ml were 66.2%, 63.9%, and 57.1%, respectively. Our results support the QFT-GIT assay as a potential tool for diagnosing tuberculosis and for monitoring the efficacy of anti-tuberculosis treatment.

With the ever-increasing rate, obesity has become an epidemiological problem throughout the globe comprising about 39% of the world population as of now. Among several reasons, disruption of the gut microbial ecosystem might contribute to the pathogenesis of metabolic disorders, including obesity, metabolic syndrome, type 2 diabetes, and other associated comorbidities. Though the mechanisms related to dysbiosis are unclear, diet might play a modulating role where different dietary approaches manipulate microbial richness and abundance as well as stability. For instance, shifting of Firmicutes and Bacteroidetes ratio in the gut might have a role in association with the dietary approaches and ingestion duration. Along with altered gut microbial composition, microbial metabolites such as short-chain fatty acids (SCFA) after ingestion of non-digestible dietary starches may have an impact on host metabolism by regulating lipogenesis, gluconeogenesis, and inflammation with potential associations to health and obesity. The dietary approaches like carbohydrates, fibre, protein, and/or fat diet at various arrangements can make a shift in the composition of gut microbiota if introduced for a short period. However, the unique pattern of the gut microbes usually remains the same along with the longer period of habitual diet. Though the short-term dietary intervention or circadian rhythm influences a transient change in gut microbes, other than habitual diet, the understanding related to long-term dietary change-induced permanent alterations is minimum. Alternatively, the usage of prebiotics, probiotics as well as postbiotics could be beneficial to overcome dysbiosis. This review highlights the current knowledge and the interaction between the human intestinal microbiota and diet as a modifying factor, in obesity allowing the scientists to uncover novel targets and tools to use as customized therapy.

The salt marshes, lying at the land-sea temperate interface, furnish a plethora of ecosystems services such as biodiversity niche support, ocean-climate change regulation, ornithology recreo-tourism or plant gathering by hand. They undergo significant worldwide losses due to their conversion into crop fields and to their spatial compression between the rising sea-level and the armoring shoreline. Their monitoring however requires to use a suite of remote sensing sensors to embrace the regional scale while capturing the plant details. This research innovatively adopts a multiscale approach using a cascading spaceborne and airborne process, from the 10-m Sentinel-2, through the 3-m Dove, to the 0.03-m unmanned airborne vehicle (UAV) imageries. The high to very high temporal resolution of the Sentinel-2 and Dove enabled to cover twenties and tens of km2 over five and four years, respectively, in the form of normalized difference vegetation index (NDVI) classes, associated with microphytobenthos, low, medium and high salt marsh vegetation, including the opportunistic Elyma genus. The NDVI was then modelled at the UAV scale (a few km2) using a three-layered NN prediction, providing the final near-infrared (NIR), and the intermediate red, green and blue reflectance imageries, calibrated/validated/tested with the Dove reflectance imageries (R2NIR=0.98, R2red=0.88, R2green=0.84, and R2blue=0.90). The 100fold increase in pixel size allowed to detect the decimeter-scale objects of the tidal flats and salt marshes, to enlarge the NDVI class ranges, and hold great promise to model other spectral bands at the UAV scale for further deeply enhancing the salt marsh mapping.

The cornerstone of molecular magnetism is a detailed understanding of the relationship between structure and magnetic behaviour, i.e. the development of magneto-structural correlations. Traditionally, the synthetic chemist approaches this challenge by making multiple compounds that share a similar magnetic core but differ in peripheral ligation. Changes in the ligand framework induce changes in the bond angles and distances around the metal ions which are manifested in changes to magnetic susceptibility and magnetisation data. This approach requires the synthesis of series of different ligands and assumes that the chemical/electronic nature of the ligands and their coordination to the metal, the nature and number of counter ions and how they are positioned in the crystal lattice, and the molecular and crystallographic symmetry have no effect on the measured magnetic properties. In short, the assumption is that everything outwith the magnetic core is innocent, which is a huge oversimplification. The ideal scenario would be to have the same complex available in multiple structural conformations, and this is something that can be achieved through the application of external hydrostatic pressure, correlating structural changes observed through high pressure single crystal X-ray crystallography with changes observed in high pressure magnetometry, in tandem with high pressure inelastic neutron scattering (INS), high pressure electron paramagnetic resonance (EPR) spectroscopy and high pressure absorption/emission/Raman spectroscopy. In this review, which summarises our work in this area over the last 15 years, we show that the application of pressure to molecule-based magnets can (reversibly): (1) lead to changes in bond angles, distances and Jahn-Teller orientations; (2) break and form bonds; (3) induce polymerisation/depolymerisation; (4) enforce multiple phase transitions; (5) instigate piezochromism; (6) change the magnitude and sign of pairwise exchange interactions and magnetic anisotropy and (7) lead to significant increases in magnetic ordering temperatures.

BACKGROUND. Two sequelae of non-alcoholic steatohepatitis (NASH), ESLD and HCC, have become the leading causes for liver transplantation in the Western. The present study aims to approach the cellular metabolic disturbances involved in NASH progression that are associated with microbiota community changes. METHODS. Metabolic effects and microbiota community changes were explored in the murine with NASH progression by blocking the Na/K-ATPase/Src/reactive oxygen amplification loop using the synthetic targeting peptide pNaKtide. DNA from the terminal ileum microbiota habitat was obtained and amplified by PCR to develop DNA bacterial phylogenic sequence analysis of wild type and treated animals at 12, 24 and 48 weeks. Induced changes by pSrc normalization at 24 weeks were correlated with liver morphological changes, intestinal CD4+/CD8+ ratio, and liver macrophage CD14+ expression. Differences among groups were evaluated by ANOVA/t-test and Principal Component Analysis (PCA). RESULTS. Microbiota communities varied significantly at all time points (12, 24 and 48 weeks), with an increase of Verrucomicrobia and a decrease of Bacteroidetes and Firmicutes in the HFD group. Microbiota community changes regressed to their wild-type state at 24 weeks on treated animals, and those changes were associated with a decrease in liver inflammation and senescence, lower ileum CD4+/CD8+ T cells and higher liver CD14+ cells (p<0.05). Concomitantly, the metabolic disturbances in our diet-induced NASH model were normalized by NKA/Src signaling blockage and exercise with a paucity of apoptotic activity, mitigation of cell senescence, and regression of liver fibrosis (p<0.01). CONCLUSIONS. pSrc inhibition at caveolar α1-Na/K-ATPase rescinded NASH-related metabolic disturbances establishing resident physiological microbiota communities with concomitant paucity on apoptotic activity and regression of liver fibrosis; effects that were associated with both gut and liver T-lymphocyte responses.

Rocks are materials with a wide variety of structures and properties. These can be unprocessed conglomerates of conglomerated minerals as well as crystallized outcrop or metamorphic rocks. Their processing, especially shaping, poses many technological difficulties. Therefore, it is very important to answer the question of how these natural materials yield to high-pressure water jet and abrasive water. It is equally important to determine the effect of key process parameters such as pressure, water nozzle diameter and feed rate on cutting efficiency. The first two parameters determine the water output and power of the jet, while the third determines the jet erosion time per unit volume of material. Their interdependence, using appropriate evaluation indicators, allows to determine the energy intensity of processing and directions for its minimization.

In the recent concrete industry, high fluidity concrete is being widely used for the pouring of dense reinforced concrete. Normally, in the case of high fluidity concrete, it includes high binder contents, so it is necessary to replace part of the cement through admixtures such as fly ash to procure economic feasibility and durability. This study shows the mechanical properties and field applicability of high fluidity concrete that using mass of fly ash as alternative materials of cement. The high fluidity concrete mixed with 50% fly ash was measured to manufacture concrete that applies low water/binder ratio to measure the mechanical characteristics as compressive strength and elastic modulus. Also, in order to evaluate the field applicability, high fluidity concrete containing high volume fly ash was evaluated that fluidity, compressive strength, heat of hydration and drying shrinkage of concrete.

Abstract: The VSI represents a significant advancement in the assessment of gastrointestinal-specific anxiety among patients with Irritable Bowel Syndrome (IBS) and other Chronic Inflammatory Bowel Diseases (IBD). However, an Italian version of the instrument is not yet available for the reference population. This study utilized a national sample of 500 individuals, including healthy controls and patients with Ulcerative Colitis and Crohn's Disease, to test the validity and reliability of the Italian VSI. Using back-translation methodology to ensure translation fidelity, the research applied a questionnaire and the VSI through an online format to 500 participants. Data analysis revealed that the Italian VSI had excellent psychometric properties, demonstrating high internal consistency (Cronbach’s α = 0.95) and construct validity. The scale proved sensitive in detecting significant differences in visceral sensitivity among groups, highlighting its utility as a clinical and research assessment tool. Specifically, the Italian VSI exhibited a unidimensional factorial structure and maintained a strong correlation with other measures of anxiety and the severity of gastrointestinal symptoms, confirming its role in enhancing the understanding and management of IBS and IBD in Italy.

Diagnosis of neonatal sepsis is difficult as signs and symptoms are nonspecific. Interleukin-6 (IL-6) is a promising marker for neonatal sepsis. We aimed to test the accuracy of IL-6 in term and preterm infants after 72 hours of life (late-onset sepsis-LOS). We searched for IL-6 diagnostic accuracy studies between 1990 and 2020 using the PubMed database. Study selection was performed. The range of reported IL-6 sensitivities and specificities was 68% to 100% and 28% to 100%, respectively, the median values were 85.7% and 82% from 15 studies including 1306 infants. Subgroup analysis was performed. Sensitivity (87% vs 82%), but not specificity (both 86%), was better in preterm infants than in preterm and term infants. Early sample collection had the highest sensitivity (84%), but the lowest specificity (86%). To assess quality we used a STARD checklist adapted for septic neonates. Limitation of this review include the heterogeneous group of studies on the one side and the small number of studies on the other side that analyzed different combinations of biomarker. We concluded that IL-6 had a good performance especially in the preterm infant population and best results are achieved by measurements at the time of LOS suspicion.

In Tropical Monsoon climates, precipitation exceeds evapotranspiration, leading to increased surface runoff, especially in floodplain regions. The Bhagirathi-Hooghly River in India is the focus of the study, which analyses hydrology, sediment yield, and water balance in this floodplain area. This investigation employs the Soil and Water Assessment Tool (SWAT) model within the ArcGIS environment, using remote sensing data. The study area is divided into 4 sub-basins and 40 Hydrological Response Units (HRUs), with a focus on Land Use/Land Cover (LULC) parameters, soil attributes, and slope characteristics. Calibration (1998-2010) and validation (2011-2018) of river discharge and sediment yield are performed using the SUFI-2 algorithm within SWAT-CUP. The calibration process shows a strong correlation between observed and simulated data points, indicating the model's accuracy. The study reveals a pattern of early-year evapotranspiration followed by increasing rainfall during the monsoon season, leading to heightened surface runoff and sediment yield. Excessive rainfall, therefore, emerges as a pivotal driver of flood incidences within the floodplain. The insights derived from the SWAT model's floodplain data have the potential to inform flood control and sedimentation mitigation strategies. The assimilation of this data can empower local stakeholders and contribute to sustainable livelihoods and improved living conditions, offering guidance for future governmental policies.

The type III receptor tyrosine kinase FLT3 is a pivotal kinase for hematopoietic progenitor cell regulation, with significant implications in acute myeloid leukemia (AML) through mutations like internal tandem duplication (ITD). This study delves into the structural intricacies of FLT3, the roles of activation loop mutants, and their interaction with tyrosine kinase inhibitors. Coupled with this, the research leverages molecular contrastive learning and protein language modeling to examine interactions between small molecule inhibitors and FLT3 activation loop mutants. Utilizing the ConPLex platform, over 5.7 million unique FLT3 activation loop mutants-small molecule pairs were analyzed. The binding free energies of three inhibitors were assessed, and cellular apoptotic responses were evaluated under drug treatments. Notably, the introduction of the Xepto50 scoring system provides a nuanced metric for drug efficacy. The findings underscore the modulation of molecular interactions and cellular responses by Y842 mutations in FLT3-KD, highlighting the need for tailored therapeutic approaches in FLT3-ITD-related malignancies.

This study aims to theoretically address the design and analysis of an efficient pressure sensor designed by using a polymer-based defective 1D annular photonic crystal (APC). The 1D APC comprises an alternate arrangement of Si and SiO2 in a cylindrical fashion, incorporating a central defect layer. The investigation of the reflectance characteristics of the proposed structure is conducted by separately considering the polystyrene (PS) and the polymethyl methacrylate (PMMA) polymer materials as the defect layer. The pressure-sensitive refractive index of the polymers and the constituent materials of the APC plays a vital role in envisaging the pressure-sensing application. The cornerstone of this study is represented by the shift analysis in the wavelength of the defect mode inside the band gap using different applied pressures by employing the modified transfer matrix method (MTMM). Various geometrical parameters like the defect polymer layer’s thickness and the APC period were carefully optimized to achieve higher sensing performance. The proposed design demonstrated a remarkable pressure sensitivity and FoM of 51.29 nm/GPa and 301.7 GPa-1, respectively, which is considerably high in the current research scenario. It is believed that the proposed structure can be an apt candidate as an innovative high-performance pressure sensor, and it can play a key role in photonic integrated circuits.

In order to study the surface settlement law of subway tunnel engineering site overlying soft soil layer under the action of earthquake, ABAQUS finite element analysis software was used to study the surface settlement law of subway tunnel construction site overlying soft soil layer under the action of three different seismic waves, including El-Centro wave, Kobe wave, and artificial seismic wave with exceedance probability of 10%, based on the Dalian Metro Line 5 with overlying soft soil layer as the engineering background, and the law was analyzed theoretically. Then, the surface settlement law of tunnel top was studied based on El-Centro wave and soft soil parameters, and the sensitivity analysis of soft soil parameters on surface settlement of tunnel top was carried out by orthogonal test method. The results show that under earthquake action, the settlement of the strata within a certain range of the tunnel roof is significantly greater than that of the surrounding strata, forming a settlement trough with a width of about 8 to 20 meters. The width of the settlement trough under the El-Centro wave is the largest, about 19.6 meters, surpassing the artificially synthesized seismic waves with a probability of 10%, which is about 15.6 meters, while the width of the settlement trough under the Kobe wave is the smallest, about 8.5 meters. The ground surface within a range of about 20 meters above the tunnel roof is most strongly affected by the seismic waves and the special lithology of the overlying soft soil layer, and the settlement is the largest. The settlement law of the settlement trough in the overlying strata of the tunnel conforms to the Peck formula. Increasing the elastic modulus of the silty soil can reduce the settlement of the ground surface above the tunnel roof, increasing the Poisson's ratio of the silty soil will increase the settlement of the ground surface above the tunnel roof, increasing the cohesive force of the silty soil to 20 kPa will basically stabilize the settlement of the ground surface above the tunnel roof, and increasing the internal friction angle of the silty soil will basically not change the settlement of the ground surface above the tunnel roof. The sensitivity of the soft soil parameters to the settlement of the ground surface above the tunnel roof is in the order of Poisson's ratio, elastic modulus, cohesive force, and internal friction angle.

Musculoskeletal models (MSKMs) are used to estimate the muscle and joint forces involved in human locomotion, often associated with the onset of degenerative musculoskeletal pathologies (e.g. osteoarthritis). Subject-specific MSKMs offer more accurate predictions than their scaled-generic counterparts. This accuracy is achieved through time-consuming personalisation of models and manual tuning procedures that suffers from potential repeatability errors, hence limiting the wider application of this modelling approach. In this work we have developed a methodology for identifying and ranking the muscles that are more important to the determination of the joint forces, thus producing reduced but still accurate representation of the musculoskeletal system in shorter timeframes. The methodology hinges on Sobol's sensitivity analysis (SSA) for ranking the muscle importance. The thousands of data points required for SSA are generated using Gaussian Process emulators, a Bayesian technique to infer the input-output relationship between nonlinear models from a limited number of observations. Results show that there is a pool of muscles whose personalisation has little effects on the model predictions. Furthermore, joint forces in subject generic and subject generic models are influenced by different set of muscles, suggesting the existence of a model specific component of the sensitivity analysis.

Predicting the tidal wave is essential not only to better understand hydrological cycle at the boundary between land and ocean but also to improve energy production in the coastal area. As affected by various factors such as astronomical, meteorological, and hydrological effects, predicting the tidal wave at the estuary remains uncertain. In this study, we present a novel method to improve short-term tidal wave predictions using a fixed-lag smoother based on sequential data assimilation (DA). The proposed method is implemented for the tidal wave predictions at the estuary of Nakdong River. As a result, the prediction accuracy was improved by 63.9% with DA and the calibration using the regression. Although the accuracy of DA diminished for increasing forecast lead times, the 1-hr lead forecast by DA had still 44.4% improvement over the open loop without DA. Plus, the optimal conditions for the fixed-lag smoother were analyzed in terms of the order of a smoothing function and the length of assimilation window and forecast lead time. It was suggested that the optimal DA configuration could be obtained with the 8th order polynomial as a smoothing function assimilated under 6-hr or longer past and future DA windows.

This research investigates a model for the COVID-19 outbreak in Indonesia by analyzing comorbid diseases, self-quarantine, government-provided quarantine, and immunization regimens. Some model parameters are derived from academic journals, others are extrapolated from data collected by the Indonesian Ministry of Health in 2020, and others are assumed. Evaluation of the model reveals non-endemic equilibrium points, endemic equilibrium points, and the basic reproduction number (BRN). The contact rate and infected probability factors impact the increase in the number of COVID-19-infected individuals with comorbid disease within a group. According to the sensitivity analysis of the BRN, the key parameters impacting the spread of COVID-19 are the rate of susceptible recruitment, the rate of contact, the COVID-19 infection death rate, and the likelihood of infection. In addition, sensitivity analyses are provided to examine the effect of parameter changes on subpopulations. We discovered that the natural death rate is the most sensitive parameter based on the sensitivity index after reaching equilibrium. Symmetry aspects appear in some of the visualization of the model’s solution and the BRN and parameters’ sensitivity.

The combination of statistical learning technologies with large databases of psychophysiological data has appropriately generated enthusiastic interest in future clinical applicability. It is argued here that this enthusiasm should be tempered with the understanding that significant obstacles must be overcome before the systematic introduction of psychophysiological measures into neuropsychiatric practice becomes possible. The nonspecificity of psychophysiological measures complicates their use in diagnosis. Low test-retest reliability complicates use in longitudinal assessment, and quantitative psychophysiological measures can normalize in response to placebo intervention. Ten cautionary observations are introduced and, in some instances, possible directions for remediation are suggested.

Trachsummaroma is an eye infectious disease caused by Chlamydia Trachomatis bacterium, which may lead to irreversible blindness. The disease is spread directly or indirectly by contacting a contaminated material. It can also be transmitted through the disease vector known as “Musca sorbens” or “Bazaar fly”. To curtail the spread of the disease in a population, a meaningful information on the spread and possible control of the disease is required. Mathematical modeling provides efficient tools that can be used to understand and analyze the dynamics of the disease and its control. Several compartmental epidemic models have been proposed in the literature to study the dynamics of trachoma; including SI, SIR and SEIR. However, majority of the existing trachoma models consider only person to person transmission. Thus, the information provided by such models is insufficient since they did not capture the disease vector transmission. The current study proposed a novel SEIR-SEI model that consider both person-person and vector transmission dynamics. The threshold quantity, basic reproduction number R0 is obtained using the next generation matrix, and it was proved that the disease-free equilibrium is asymptotically stable when R0 < 1, and the endemic equilibrium is globally asymptotically stable when R0 > 1. Some simulation results with the aid of mesh plots for the reproductive number as a function of two different biological parameters were obtained. Furthermore, a comprehensive sensitivity analysis is conducted to identify the influence of the individual parameters on the R0. Numerical results show that the vector contact rate has the highest sensitivity with respect to R0, and the value of R0 increases with increase in, hence, the disease can be controlled by decreasing the vector contact rate. Similarly, improving the rate of environmental hygiene and facial cleanliness will decrease the size of R0 and result in the declination of the disease transmission. Moreover, a detailed parameter estimation of the model parameters and model fitting was presented with the use of field data cases from Northern Nigeria using least-square fitting method. The study provides alternative tools that can be used for planning trachoma control program to achieve global eradication of trachoma as a public heath challenge as targeted by WHO in 2030.

The narrow process window during intercritical annealing and discontinuous yielding have limited the commercialisation of medium Mn steels. In this study, a double annealing process based on the commercial continuous annealing line is proposed. The cold-rolled medium Mn steels were first fully austenitized and quenched during the first annealing, followed by the intercritical annealing for reverted austenite transformation. The microstructure of duplex lath-shaped austenite and ferrite is produced and the steel exhibit a desirable continuous yielding during tensile deformation. Al is added into the medium Mn steel to enlarge the process window and to improve partitioning efficiency of Mn. The produced steel is more robust with temperature fluctuation during the industrial process due to the enlarged intercritical region. Mn partitioning is more efficient owing to elevated annealing temperature, which results in the improvement of ductility in the Al-added steel with increased austenite stability.

Background and Aim: Cancer is a disease characterized by uncontrolled cell growth and invasion of tissues. It seems that personality differences and psychological factors are important factors that lead to different reactions to cancer. Therefore, the main purpose of the present study was to investigate the relationship between type D, stress level of life events, personality traits, and anxiety sensitivity in people with breast cancer attending to Tehran Bu-ali Hospital. Methods: The study was a correlational study in which 100 cancer patients referred to Bu-ali Hospital in Tehran, selected by the available sampling method from April to June 2018. The tools used included the Denollet DS-14 Type D Questionnaire, the Paykel Life events Questionnaire, the Eysenck Personality Questionnaire, the ASI Anxiety Scale, Floyd et al., Data analysis in this study is taken place by using SPSS software, two descriptive levels (percentage, frequency, etc.) and regression. Results: The study results showed that there is a relationship between type D personality with stress of life events, neurosis, extraversion, and psychopath dimensions of personality and anxiety sensitivity in breast cancer patients. Conclusion: Psychological factors play a role in the incidence and exacerbation of breast cancer, and ultimately patients with personality type D and personality traits such as psychosis and high anxiety sensitivity and more stress of life events show more symptoms.

This paper proposes a model based on gene expression programming for predicting discharge coefficient of triangular labyrinth weirs. The parameters influencing discharge coefficient prediction were first examined and presented as crest height ratio to the head over the crest of the weir (p/y), crest length of water to channel width (L/W), crest length of water to the head over the crest of the weir (L/y), Froude number (F=V/√(gy)) and vertex angle () dimensionless parameters. Different models were then presented using sensitivity analysis in order to examine each of the dimensionless parameters presented in this study. In addition, an equation was presented through the use of nonlinear regression (NLR) for the purpose of comparison with GEP. The results of the studies conducted by using different statistical indexes indicated that GEP is more capable than NLR. This is to the extent that GEP predicts the discharge coefficient with an average relative error of approximately 2.5% in such a manner that the predicted values have less than 5% relative error in the worst model.

Recently, light traps using light-emitting diode (LED) lights have been applied to monitor or control insect pests. The oriental armyworm, Mythimna separata Walker, is an important insect pest that has caused damage to several cereal crops, including corn, wheat and rice. The present study aims to seek out a sensitive wavelength causing high phototactic response in M. separata. The study evaluated the phototactic responses of M. separata moths to several LED lights of different wavelengths and luminance intensities under laboratory condition. Results showed that green (520 nm) LED light resulted in significant phototactic response of M. separata moths compared to LED lights of other wavelengths. Additionally, the highest attraction rate of the moths to green LED light appeared in luminance intensity group of 200 lux compared to the other intensities groups. Experiments under optimum conditions based on the above experiments revealed that the green LED light exhibited the strongest attraction rate (64.44%) among all experimental groups. An experiment performed in a net cage also showed that green LED light resulted in the highest phototactic response of M. separata moths, 1.7 times more than a commercial black light used as control. These findings clearly demonstrate that M. separata moths have a high sensitivity to the green LED light. Therefore, a light trap equipped with green LED light could be useful for monitoring and controlling M. separata moths.

Earth's global surface temperature shows variability on an extended range of temporal scales and satisfies an emergent scaling symmetry. Recent studies indicate that scale invariance is not only a feature of the observed temperature fluctuations, but an inherent property of the temperature response to radiative forcing, and a principle that links the fast and slow climate responses. It provides a bridge between the decadal- and centennial-scale fluctuations in the instrumental temperature record, and the millennial-scale equilibration following perturbations in the radiative balance. In particular, the emergent scale invariance makes it possible to infer equilibrium climate sensitivity (ECS) from the observed relation between radiative forcing and global temperature in the instrumental era. This is verified in ensembles of Earth system models (ESMs), where the inferred values of ECS correlate strongly to estimates from idealized model runs. For the range of forcing data explored in this paper, the method gives best estimates of ECS between 2.3 and 3.4 K.

Recent evidence suggests the existence of shared neural resources for rhythm processing in language and music. Such overlaps could be the basis of the facilitating effect of regular musical rhythm on spoken word processing previously reported for typical children and adults, as well as adults with Parkinson’s disease and children with developmental language disorders. The present study builds upon these previous findings by examining whether musical rhythmic priming also influences visual word processing, and the extent to which such cross-modal priming effect of rhythm is related to individual differences in musical aptitude and reading skills. EEG was recorded while participants listened to a rhythmic tone prime, followed by a visual target word with a stress pattern that either matched or mismatched the rhythmic structure of the auditory prime. Participants were also administered standardized assessments of musical aptitude and reading achievement. ERPs elicited by target words with a mismatching stress pattern showed an increased fronto-central negativity. Additionally, the size of the negative effect correlated with individual differences in musical rhythm aptitude and reading comprehension skills. Results support the existence of shared neurocognitive resources for linguistic and musical rhythm processing, and have important implications for the use of rhythm-based activities for reading interventions.

Magneto-optic surface plasmon resonance (MOSPR) based sensors are highly attractive as next generation biosensors. However, these sensors suffer from oxidation leading to degradation of performance, reproducibility of the sensor surface because of the difficulty of removing adsorbed materials, and degradation of sensor surface during surface cleaning, and these limit their applications. In this paper, I propose MOSPR-based biosensors with 0 to 15 nm thick inert polycarbonate laminate plastic as a protective layer and theoretically demonstrate the practicability of our approach in water-medium for three different probing samples: ethanol, propanol, and pentanol. I also investigate microstructure and magnetic properties. The chemical composition and layered information of the sensor are investigated using X-ray reflectivity and X-ray diffraction analyses and these show distinct fcc-Au (111) phases, as dominated by the higher density of conduction electrons in Au as compared to Co. The magnetic characterization measured with the in-plane magnetic field to the sensor surface for both the as-deposited and annealed multilayers showed isotropic easy axis magnetization parallel to the multilayer interface at a saturating magnetic field of <100 Oe. The sensor showed a maximum sensitivity of 5.5 × 10⁴%/RIU for water-ethanol media and the highest detection level of 2.5 × 10⁻⁸ for water-pentanol media as the protective layer is increased from 0 to 15 nm.c

The main objective was to analyze the influence of silicon content on high-temperature oxidation of low-alloy steels. Samples of AISI 1045, AISI 5160, and AISI 9254 steels, with different silicon contents, were oxidized at an isothermal temperature of 1000°C for times of 20 minutes, 40 minutes, and 60 minutes. The oxide layers formed mainly contain hematite, magnetite wustite, and fayalite. The average thickness of the oxide layer can decrease with an increase in silicon content below 1% but can increase for contents greater than 1% due to the difference in density between fayalite and iron oxides. Silicon tends to accumulate on the surface of steel and form a SiO2 film in the early stages of oxidation, which can control the oxidation process. The eutectic compound FeO+Fe2SiO4 forms at the oxide-steel interface, and its thickness increases with oxidation time and the silicon content present. The SiO2 film tends to decrease with oxidation time and silicon content.

Chemical flooding methods are used to recover the remaining oil after water flooding, and surfactant-polymer (SP) flooding is an important chemical flooding technology. It is of great significance to design and screen high-performance oil displacement agents in order to overcome the increasingly challenging high temperature (&gt;70 ℃) and high salinity (>10,000 mg/L) reservoirs. Based on the characteristics of high temperature (70 ℃) and high salinity (151,000 mg/L) in the Qinghai Gasi reservoir, the performance of the SP flooding system was studied. This study considered interfacial tension, emulsification, viscosity, compatibility, and oil displacement efficiency. The selected formula demonstrated high resistance to both salinity (151,000 mg/L) and temperature (70 ℃), characterized by a low oil-water interfacial tension (10-2 mN/m) and high viscosity (18.13 mPa.s). After water flooding achieved an oil recovery rate of 64.64%, the subsequent replacement rate of crude oil increased by 26.95%, confirming that SP flooding can be used as a technology for enhancing oil recovery in high-temperature, high-salinity reservoirs represented by Qinghai Gasi reservoirs.

Intended for the high voltage gain and wide-range operation of DC/DC converters for photovoltaic energy storage systems, a topology for four-phase interleaved DC/DC converters for photovoltaic power generation is proposed. This topology increases output voltage for output in series, and reduces the input current ripple by paralleling the input. Compared with traditional boost converter topology, the proposed topology reduces the output current and output voltage ripple, reduces the stress of the switching device, and reduces the withstanding voltage of the output capacitor under the premise of ensuring the boost ratio. Experimental results show that the maximum efficiency of the converter reaches 95.37%. Compared with traditional boost converters, the proposed converter offers obvious advantages in efficiency under the conditions that the output voltage and load are variable.

TiNi alloys are very widely used materials for implant fabrication. When applied as rib replacement, they are required to be manufactured as combined porous-monolithic structure, ideally with a thin porous part well-adhered to its monolithic substrate. Additionally, good biocompatibility, high corrosion resistance and mechanical durability are also highly demanded. So far, all these parameters were not achieved in one material, which is why active search in the field is still underway. In the present work, we prepared new porous-monolithic TiNi materials by sintering a TiNi powder (0-100 µm) on monolithic TiNi plates followed by surface modification with high-current pulsed electron beam. The obtained materials were evaluated by a set of surface and phase analysis methods, after which their corrosion resistance and biocompatibility (hemolysis, cytotoxicity, and cell viability) were evaluated. Finally, cell growth tests were conducted. In comparison with flat TiNi monolith, the newly-developed materials were found to have better corrosion resistance, also demonstrating good biocompatibility and potential for cell growth on their surface. Thus, the newly-developed porous-on-monolith TiNi materials with different surface porosity and morphology show promise as potential new-generation implants for rib endoprostheses.

China is facing the development requirements of the dual carbon goal and the construction needs of resilient cities. Currently, high-strength composite structural systems are a feasible solution, but their research and application in the construction field are insufficient, especially for the combination forms of concrete above C100 and steel above Q550. In response to this issue, this paper proposes a new high-performance structural system, namely the composite frame - high-strength steel plate wall core tube resilient structure system, which includes high-strength steel plate (Q550) - ultra-high strength concrete (C100) shear walls, replaceable energy dissipation coupling beams, and composite frames. Taking a 200 meter building as an example, this paper designs and establishes calculation models for a conventional reinforced concrete frame-core tube structure and a high-performance structure based on PKPM software, and establishes elastoplastic analysis models for both based on SAUSAGE software, and then conducts dynamic elastoplastic time history analysis and seismic resilience assessment of structures under design basis earthquakes (DBEs), maximum considered earthquake (MCEs) and extremely rare earthquakes (EREs). Research has shown that compared to conventional structures, new high-performance structures can effectively reduce the size of shear walls, reduce the self-weight of the structure, and enhance the space for building use; The story drift ratio has higher redundancy than specification limits, lower plastic damage and overall stiffness degradation of the structure, and better seismic performance; The seismic resilience has significantly improved, especially in the case of casualties, which can better ensure the safety of people's lives and property.

Postpartum haemorrhage (PPH) is a significant cause of maternal morbidity and mortality worldwide, particularly in low-resource settings. This study aimed to develop a predictive model for PPH using early risk factors and rank their importance in terms of predictive ability. The dataset was obtained from an observational case-control study in Northern Rwanda. Various statistical models and machine learning techniques were evaluated, including logistic regression, logistic re-gression with elastic-net regularisation, Random Forest, Extremely Randomized Trees, and gradient boosted trees with XGBoost. Random Forest emerged as the best predictive model for PPH across three different train-test data partitions. The important predictors identified in the study were haemoglobin level during labour and maternal age. However, there were differences in PPH risk factor importance in different data partitions, highlighting the need for further investigation. These findings contribute to understanding PPH risk factors, highlight the importance of considering different data partitions and implementing cross-validation in predictive modelling, and emphasise the value of identifying the appropriate prediction model for the application. Effective PPH pre-diction models are essential for improving maternal health outcomes on a global scale. This study provides valuable insights for healthcare providers to develop predictive models for PPH to identify high-risk women and implement targeted interventions

This work proposes a hollow-core photonic crystal fiber-based edible oil sensor in the terahertz (THz) range (e.g., 1.0THz ≤ f ≤ 3.0THz) and different sensing characteristics are numerically analyzed. The suggested sensor’s performance was assessed by means of COMSOL Multiphysics, a commercial program that uses the finite element approach. The computational results indicate that the relative sensitivity is 85.591%, 84.648%, 82.625%, 82.683%, and 79.161%, respectively, at f = 2.2 THz, for several types of sunflower oil, mustard oil, coconut oil, olive oil and palm oil; and the corresponding effective areas are 7.22×10-8 um2, 7.09×10-8 um2, 6.83×10-8 um2,7.09×10-8 um2, 6.5231 ×10-8 um2. In addition, the effective material loss for sunflower oil, muster oil, coconut oil, olive oil, and palm oil has been found to be 0.02561 cm-1, 0.027054 cm-1, 0.030322 cm-1, 0.028854 cm-1 ,0.035427cm-1 respectively. Moreover, the proposed sensor also has low confinement loss are 1.55×10-8 dB/m, 1.63×10-8 dB/m, 1.31×10-8 dB/m, 1.99×10-8 dB/m, 4.0345×10-8 dB/m.This proposed sensor can be fabricated using extrusion and 3D-printing technologies, and due to its augmented detecting capabilities, it can be a vital part of oil sensing devices implemented in real life such as industry fields.

Zambia recently experienced extended hours of load shedding due to reduced hydroelectricity generation attributed to poor rainfall patterns. The inability to meet energy demand has influenced the government to consider alternative energy sources. This study aims to assess the economic feasibility of the eight sites using a 25-turbine layout for a 4 MW generic wind turbine at 130m hub height. An economic evaluation mathematical model was developed to analyze the economic feasibility using net present value, simple payback period, internal rate of return, and levelized cost of electricity (LCOE). The study shows that the Lusaka wind farm was the most economical with 386 GWh energy yield analysis (EYA), wind speed of 8 m/s, NPV of 316 million dollars, SPP of 2.9 years, IRR of 82%, and LCOE of $0.182/ kWh. The results also show that the other seven sites are economically feasible, with Petauke being the lowest. The study's economic sensitivity analysis conducted by varying the average electricity tariff shows that Lusaka was the most financially viable site. Therefore, policymakers should develop cost-reflective feed-in tariff (FiT) schemes and power purchase agreements for the country to have cost-reflective electricity tariffs that will motivate independent power producers to invest in Zambia.

Flood inundation causes socioeconomic losses for coastal tourism under climate extremes, progressively attracting global attention. Mapping, evaluating, and predicting the flood inundation risk (FIR) is significant for coastal tourism. The study develops a spatial tourism–aimed framework integrating a weighted k-Nearest Neighbors (WkNN), Geographic Information Systems, and flood-related spatially environmental criteria such as precipitation, elevation, soil, and drainage systems. These model inputs were standardized and weighted using distance, and integrated into WkNN to infer regional probability and distribution of FIR. Zhejiang province, China, was selected as a case study. The resulting map was pictured to denote the likelihood of the criteria at various risk categories, which was validated by historical Maximum Inundation Extent (MIE) extracted from World Environment Situation Room. The result indicates 80.59% of WkNN results reasonably confirm the MIE. Precipitation and elevation make a negative contribution to high-medium risk, and drainage systems positively alleviate the regional stress of FIR. The results can help stakeholders make suitable strategies to protect coastal tourism, and also weigh WkNN is superior to kNN in FIR assessment. The framework provides a productive way to yield a reliable assessment of FIR and can also be extended to other risk-related environmental studies under climate change.

Research background – In the conditions of a modern developed market economy, a rather important characteristic of the activities of a public company is its activity in the stock market (market activity), which involves the development of a dividend policy, which, on the one hand, should contribute to the achievement of the main goal of financial management - maximizing the material well-being of shareholders, and, on the other hand, take into account the interests of all other stakeholders interested in the activities of a public company (including potential investors) to ensure its sustainable development in the long term. Fulfillment of this requirement is possible only within the framework of a neutral approach to the implementation of the dividend policy of a public company.Purpose – The article is devoted to the consideration of the conceptual foundations for analyzing the sensitivity of key indicators of the activity of a public company in the stock market (market activity) to the main determining factors in the context of a neutral approach to the implementation of its dividend policy.Design/methodology/approach – The methodological basis of the study was the concept of a neutral approach to the dividend policy of a public company and the concept of sensitivity analysis, developed earlier by the author of this article.Findings – It is shown that the key indicators of the market activity of a public company include the dividend yield ratio, dividend coverage ratio, the expected price of an ordinary share, the dividend yield of an ordinary share and the quote ratio of an ordinary share (price and earnings ratio per ordinary share). An analysis of the sensitivity of these indicators to the main determining factors in the context of a neutral approach to the implementation of the dividend policy of a public company involves the construction of appropriate elasticity models that allow determining the change in key indicators of market activity depending on changes in the factors that determine them. The constructed elasticity models of the key indicators of market activity listed above can be used in predictive and analytical assessments of their changes, and also make it possible to identify the causes of these changes by calculating the impact on the specified elasticity of the determinants contained in their models, performed by the appropriate methods of factor analysis, under the conditions of a neutral approach to the implementation of the dividend policy of a public company.Originality/value – The author comes to the conclusion that the elasticity models developed by him for key indicators of the activity of a public company in the stock market in terms of the main factors determining them are a fairly effective tool for managing the market activity of a public company in the context of a neutral approach to the implementation of its dividend policy.

Pseudomonas aeruginosa is an antibiotic-resistant priority pathogen as listed by the World Health Organization. P. aeruginosa, a gram-negative, rod-shaped bacterium, is frequently encountered in hospital settings as an opportunistic pathogen in nosocomial infections. P. aeruginosa has shown high antibiotic resistance, which has been attributed to several mechanisms, such as intrinsic, acquired, and adaptive resistance. This study investigates several genes which may be attributed to the acquisition of antibiotic resistance in the bacteria P. aeruginosa, as it transitions from its planktonic form to the more threatening and resistant biofilm form. Subsequently, the study assesses the comparative efficacy of three antibiotics, Ofloxacin (OFX), Tobramycin (TOB), and Ceftazidime (CAZ), in altering the expression levels of the identified multidrug efflux pump genes associated with the ability to extrude antibiotics from the cell when in the biofilm form. Efflux transporter gene expression in P. aeruginosa was conducted via extraction of total RNA in planktonic and biofilm- both untreated and treated - with Tobramycin (TOB), Ofloxacin (OFX), and Ceftazidime (CAZ). Real-time quantitative reverse transcriptase PCR was employed to analyze alterations in expression levels of the Mex A, Mex B, Mex X, Mex Y, OprM, and RPSL genes in the collected samples. In samples where no antibiotics were administered, an increase in expression of the Mex B efflux pump gene was observed compared to all other efflux pump genes in the biofilm form, providing multidrug resistance when active. The gene of interest, Mex B, was assessed for antibiotic resistance by P. aeruginosa culturing in the planktonic and biofilm forms with simultaneous treatment with TOB, OFX, and CAZ. Of the three antibiotics used, OFX showed more effectiveness in preventing biofilm growth by reducing the expression level of the Mex B efflux pump gene in the biofilm form, making P. Aeruginosa more antibiotic sensitive to OFX. TOB has similar results compared to OFX but was slightly less effective in reducing the expression of Mex B. Conversely, CAZ was not effective in reducing expression of the Mex B gene in the biofilm form or the planktonic form and was determined to be ineffective at eradicating the organism.

Metformin, the treatment of first choice in type 2 diabetes (T2D), is known to mainly act by decreasing endogenous glucose production (EGP) in the liver. Paradoxically, in the last decade several reports documented increased EGP after metformin treatment. This increase, was often attributed to pronounced rises in glucagon, consistent with counter-regulatory response to the glucose lowering effect of metformin. However, considering that hyperglucagonemia, but not hypoinsulinemia, is a main driver of EGP in T2D, increased EGP should have been a common finding. This observation, together with the finding that metformin antagonizes glucagon effects on energy expenditure and protein synthesis, concurrently to its effects on EGP and the emerging evidences demonstrating increased branched chain and gluconeogenic amino acids in response to metformin treatment may points to a liver alpha-cell skeletal muscle cross talk similar to that observed in the liver-alpha cell axis. Here, we provide a mechanistic perspective to this latter possibility, based on mechanistic studies of metformin’s transcriptional targets; retaining thus its glucagon antagonistic and presumably anti-gluconeogenic effects on liver and attributing the increase in EGP to renal gluconeogenesis. We finally discuss how increased EGP might reflect an adverse response to metformin treatment, providing support from clinical and epidemiological data.

The characteristics of the eddy mass transport are estimated depending on the values of the parameters of a large-scale flow that forms under the conditions of the shelf seas in the Arctic. For this, the results of numerical simulation of the Kara Sea with a horizontal resolution permitting the development of mesoscale eddies are used. The parameters resulting from numerical experiment are considered as a statistical sample and are analyzed using methods of sensitivity study and clustering of sample elements. Functional dependencies are obtained that are closest to the simulated distributions of quantities. These expressions make it possible, within the framework of large-scale models, to evaluate the characteristics of the cross-isobatic eddy mass transport in the diffusion approximation with a counter-gradient flux. Numerical experiments using the SibCIOM model showed that areas along the Fram branch of the Atlantic waters trajectory in the Arctic as well as the shelf of the East Siberian and Laptev seas with adjacent deep water areas are most sensitive to proposed parameterization of eddy exchanges. Accounting for counter-gradient eddy fluxes turned out to be less important.

The effects of transcranial magnetic stimulations (TMS) show that the human brain is impacted by some magnetic fields (EMFs). Moreover, after a delay, it produces potentials that reveal a subsequent processing of this impact. The human brain might also be sensitive to very weak magnetic fields of extremely low frequencies (vwEMFelf). Namely, to the vwEMelf produced by the brain of other persons when they process visual stimuli. In effect, two studies report that the event-related brain potentials (ERPs) that are evoked by presenting a picture to a participant can be modulated by simultaneously presenting a picture to a partner. To confirm it here, we followed most of the methods of these studies. We recorded the ERPs evoked by presenting, at each trial, the photograph of a face. Simultaneously and, most importantly, privately, we presented a partner with the same or with a different face photograph. ERPs of participants were found to depend on that sameness (p0.001), unbeknownst to them. These joint processing effects (JPEs), confirm a sensitivity of the human brain to the vwEMFelf produced by other brains.

Objectives: This paper presents a statistical review of modelling simulations for frequency and sensitivity of COVID-19 testing paradigms. Methods: We performed a review of preprints and published articles on PubMed from January 1, 2020 – March 1, 2021 using the search terms “COVID screening testing”, “COVID testing frequency”, “COVID testing frequency screening” and “SARS-CoV-2 testing frequency”.Results: Several authors’ conclusions support the claim that test frequency and test sensitivity both play a role in reducing SARS-CoV-2 transmission. We highlight the interplay between frequency of testing, test sensitivity and the speed at which test results are available in our review. Conclusions: Evidence suggests that sensitivity and frequency of testing both play a part in decreasing transmission of disease. We conclude that, overall, test sensitivity plays less of a role in reducing disease transmission in a population compared to the frequency of testing and how quickly test results are available.

Surrogate model based optimization method is widely-used to accelerate the design and optimization process~\cite{marler2004survey}. The input of regression model used in the surrogate model are numbers, which requires users to parametrize the geometries. In this paper, a new parameterization-free surrogate model is introduced and its corresponding uncertainty quantification and sensitivity analysis method are discussed. The input of new surrogate model methods is surface mesh of simulation domain. \Gls{gnns} is used to extract geometric information, and \Gls{cnns} is used to predict contours. This framework bypasses parameterization,as a consequence, uncertainties introduced by manual parameterization is reduced. However, such changes compared with conventional surrogate model methods impose great challenge on uncertainties quantification and sensitivity analysis. Uncertainties quantification in this paper means the error bar of prediction results, which is calculated by Gaussian Process Regression method in current surrogate method. In this paper, a new quantification method achieved by Kullback-Leibler divergence (KLD) is introduced. And the sensitivity analysis is conducted by Automatic Differentiation, which gives a Jacobian matrix of inputs. The method and analysis mentioned above are demonstrated by a low-pressure steam turbine rotator and its exhaust system.

While the link between Sensory-processing sensitivity (SPS) and internalizing symptoms has been well-established, a link to externalizing problems is still to be explored. This study aimed to further examine the relation between SPS and behavioral problems by testing the potential mediating roles of trait emotional intelligence (TEI) and decision-making styles. Pathway analyses were conducted on data from 268 community sample participants (Mage= 25.81, SD=2.41, 61.2% females). Results indicated gender differences in the pathway level outcomes of SPS, as well as potential partial mediators in men and women. SPS both directly and via the mediating effects of well-being factor (TEI) and avoidant decision-making influenced depression, regardless of gender. Direct effects on aggression were, however, obtained only in the male sample. Indirect effects of SPS on aggression were found in spontaneous decision-making for men, and in self-control and sociability factors of TEI for women. Directions for future research were discussed. sensory-processing sensitivity, depression, aggression, emotional intelligence, decision-making style, gender differences

Chemotherapy treatment based on Cisplatin (CDDP) is established as the drug of choice for head and neck squamous cell carcinoma (HNSCC). Malignant tumors respond to microenvironment alteration through a dynamic balance of mitochondrial fission and fusion. HNSCC is known to have hypoxic conditions, yet the effects and underlying mechanisms of hypoxia on chemosensitivity and mitochondrial dynamics remain unclear. We found that hypoxia promoted mitochondrial fission and CDDP sensitivity in HNSCC cells. Importantly, Mff was shown to be correlated with chemosensitivity in clinical samples of HNSCC that underwent a hypoxic condition. Hypoxia-inducible factor 1 α-subunit (HIF-1α) dramatically increased Mff transcriptional expression and directly bound to Mff. Hypoxia enhanced the release of reactive oxygen species (ROS) and upregulated the expression of Mff via HIF-1α in HNSCC cells. ROS depletion in HNSCC cells attenuated HIF-1α, Mff expression, and mitochondrial fission. Moreover, a knockdown of Mff suppressed hypoxia-induced mitochondrial fission and decreased CDDP chemosensitivity in vivo and in vitro. Our findings revealed that the hypoxia-induced release of ROS promoted mitochondrial fission and CDDP chemosensitivity via the regulation of HIF-1α/Mff in HNSCC cells, indicating that Mff may serve as a new biomarker to predict neoadjuvant chemosensitivity in HNSCC patients

Since the beginning of the year 2020, the global healthcare system has been challenged by the threat of the SARS-COV 2 virus. Molecular, antigen, and antibody testing are the mainstay to identify infected patients and fight the virus. Molecular and antigen tests that detect the presence of the virus are relevant in the acute phase only. Serological assays detect antibodies to the Sars-CoV-2 virus in the recovering and recovered phase. Each testing methodology has its advantages and disadvantages. To evaluate the test methods, sensitivity (percent positive agreement - PPA) and specificity (percent negative agreement – PNA) are the most common metrics utilized, followed by the positive and negative predictive value (PPV and NPV), the probability that a positive or negative test result represents a true positive or negative patient. In this paper, we illustrate how patient risk and clinical costs are driven by false-positive and false-negative results. We demonstrate the value of reporting PFP (probability of false positive results), PFN (probability of false negative results), and costs to patients and healthcare. These risk metrics can be calculated from the risk drivers of PPA and PNA combined with estimates of prevalence, cost, and Reff number (people infected by one positive SARS COV-2).

In this paper, a solenoid based linearly movable armature system is designed using robust control theory in order to improve the performance of the system. Reference track method is the best performance analysis for position control systems. Among the robust controllers, H infinity mixed-sensitivity and Mixed H 2 /H∞ with Regional Pole Placement Controllers are used to improve the performance of the system. Comparison of the proposed controllers for tracking a reference displacement signals (step and sine wave) and a promising simulation result have been obtained.

The present novel corona virus (2019-nCoV) infection has created a global emergency situation by spreading all over the world in a large scale within very short time period. The infection induced death rate is also very high. There is no vaccine or anti-viral medicine for such infection. So at this moment a major worldwide problem is that how we can control this pandemic. On the other hand, India is a high population density country, where the corona virus disease (COVID-19) has started to spread from $1^{st}$ week of March, 2020 in a significant number of COVID-19 positive cases. Due to this high population density human to human social contact rate is very high in India. So control of the pandemic COVID-19 in early stage is very urgent and challenging problem. Mathematical models are employed in this paper to study the COVID-19 dynamics, to identify the influential parameters and to find the proper prevention strategies to reduce the outbreak size. In this work, we have formulated a deterministic compartmental model to study the spreading of COVID-19 and estimated the model parameters by fitting the model with reported data of ongoing pandemic in India. Sensitivity analysis has been done to identify the key model parameters. The basic reproduction number has been estimated from actual data and the effective basic reproduction number has been studied on the basis of reported cases. Some effective preventive measures and their impacts on the disease dynamics have also been studied. Future trends of the disease transmission has been Predicted from our model with some control measures. Finally, the positive measures to control the disease have been summarized.

The effect of sensitivity points (sequence order and position of every element) of sequences following comparative optinalysis under two proposed mechanisms, the paranodic and synodic skewization, was studied to develop a modeling approach to comparative optinalysis of sequences. The results show that the outcomes of comparative optinalysis (similarity measurement) in a set of paranodically skewed sequences can be modeled deterministically by suitable line regression functions. The sensitivity points (nodes) of a sequence display two important and distinct zones, the K-zones and the B-zones. Continues paranodic skewization within these zones (KB zones) operates within probability space, but at hyperskewization level and at the K-zones only, the outcomes of comparative optinalysis operate outside the probability space. Moreover, the outcomes of comparative optinalysis by synodic skewization can be modeled deterministically by some regression line functions, but a general regression function cannot be identified. At certain limit of skewization value space, following paranodic and synodic skewization, the outcomes of comparative optinalysis at the left-sided sequence form a similar pattern with the right-sided sequence.

Analysis of 49 strains of F. langsethiae originating from northern Europe (Russia, Finland, Sweden, UK, Norway, and Latvia) revealed the presence of spontaneous auxotrophic mutants that reflect natural intraspecific diversity. Our investigations detected that 49.0% of F. langsethiae strains were auxotrophic mutants for biotin, and 8.2% of the strains required thiamine as a growth factor. They failed to grow on vitamin-free media. For both prototrophic and auxotrophic strains, no growth defect was observed in rich organic media. Without essential vitamins, a significant reduction in the growth of the auxotrophic strains results in a decrease of the formation of T-2 toxin and diacetoxyscirpenol. In addition, all analysed F. langsethiae strains were distinguished into two subgroups based on PCR product sizes. According to our results, 26 and 23 strains of F. langsethiae belong to subgroups I and II respectively. We determined that the deletion in the IGS region of the rDNA of F. langsethiae belonging to subgroup II is linked with temperature sensitivity and causes a decrease in strain growth at 30 °C. Four thiamine auxotrophic strains were found in subgroup I, while 21 biotin auxotrophic strains were detected in subgroups II. To the best of our knowledge, the spontaneous mutations in F. langsethiae observed in the present work have not been previously reported.

The gas-water relative permeability curve plays a crucial role in reservoir simulation and development for condensate gas reservoirs. In this study, we conducted a series of high temperature and high pressure analysis experiments on real gas cores from Wells A and B in Block L of the Yinggehai Basin to investigate the effects of temperature, pressure, and different types of gas media on gas-water seepage. The experimental results demonstrate that: Temperature has a significant impact on both gas and water relative permeability, particularly on the former. As temperature increases, gas relative permeability shows a substantial increase while water relative permeability remains relatively unchanged. Under the same effective stress, increasing pressure causes downward shifts in both the gas and water relative permeability curves; however, there is a more pronounced decrease in gas relative permeability. Gas type has minimal influence on phase permeability except at higher water saturation where differences become apparent. When water saturation ranges from 80% to 50%, there is no significant variation observed in the measured relative permeability of different displacement gases; however, as water saturation exceeds 80%, distinctions gradually emerge. At bound water saturation conditions, nitrogen exhibits lower relative permeability compared to simulated gases with approximately 92% similarity between them. This investigation into the characteristics of gas-water relative permeability in high temperature and high pressure condensate reservoirs within Yinggehai Basin provides valuable insights for efficient development strategies for similar reservoirs.

This paper presents the design and experimental results of a long cavity length Nd: YAG laser with large stable zone for water jet guided laser (WJGL) applications. The design is based on the light transmission matrix and resonator stability conditions, aiming to achieve a large stable zone and a short cut-off thermal focal length (CTFL). A folded concave resonator is researched to enhance the cavity length, and the influence of the tun-able cavity arm length on the oscillating beam in the resonator and in the YAG crystal is theoretically studied. Moreover, the effects of the output mirror curvature and the cavity arm length on the range of the stable area and the cut-off thermal focal length are also investigated. Experimental results show that a stable green laser output is obtained after second harmonic generation (SHG), with a pulse width ranging from 43ns to 143ns within the laser operating frequency range of 5-20kHz. At an operation frequency of 10kHz, the output power is 21.33W, and the instability of the output power within 400 minutes is 0.88%. The laser source achieves a maximum power of 25.7W at 20kHz, and the maximum single pulse energy reaches 2.7mJ at 6kHz. Finally, this is used as the laser source to couple with a water jet with a diameter of 100 microns, achieving a lossless water conductivity transmission over 60mm length with a peak power density of 0.742GW/cm2. These results demonstrate the suitability of the designed laser source for WJGL technology research.

Indonesia's SUMBAGUT 150 kV transmission of High Voltage Alternating Current Network (HVAC) system has considerable power losses. These power losses are a critical problem in the transmission network system. Meanwhile, this study provides one solution to reduce power losses using a High Voltage Direct Current (HVDC) network system. Determining the location to convert HVAC into HVDC is very important. The authors use Particle Swarm Optimization (PSO) to get the optimal location on the 150 kV SUMBAGUT HVAC transmission network system. The study results showed that before using the HVDC network system, the power losses were 122.26 MW. Meanwhile, power losses with one transmission HVDC in the "Paya Pasir-Sei Rotan" are 84.16 MW, "Porsa-P. Siantar" 90.83 MW, "Paya Pasir-Paya Geli" 104.14 MW. Then power losses with two transmission HVDC in "Paya Pasir-Sei Rattan" and "Porsa-P. Siantar" is 71.24 MW, "Paya Pasir-Sei Rotan" and "Paya Pasir-Paya Geli" 77.46 MW, "Porsa-P. Siantar" and "Paya Pasir-Paya Geli" 78.52 MW. The last result, power losses with three transmission HVDC in "Paya Pasir-Sei Rotan," "Porsa-P. Siantar," and "Paya Pasir-Paya Geli" lost 64.57 MW.

This study analyses some of the leading technologies for the construction and configuration of IT infrastructures to provide services to users. For modern applications, guaranteeing service continuity even in very high computational load or network problems is essential. Our configuration has among the main objectives of being highly available (HA) and horizontally scalable, that is, able to increase the computational resources that can be delivered when needed and reduce them when they are no longer necessary. Various architectural possibilities are analysed, and the central schemes used to tackle problems of this type are also described in terms of disaster recovery. The benefits offered by virtualisation technologies are highlighted and are bought with modern techniques for managing Docker containers that will be used to build the back-end of a sample infrastructure related to a use-case we have developed. In addition to this, an in-depth analysis is reported on the central autoscaling policies that can help manage high loads of requests from users to the services provided by the infrastructure. The results we have presented show an average response time of 21.7 milliseconds with a standard deviation of 76.3 milliseconds showing excellent responsiveness. Some peaks are associated with high-stress events for the infrastructure, but the response time does not exceed 2 seconds even in this case. The results of the considered use case studied for nine months are presented and discussed. In the study period, we improved the back-end configuration and defined the main metrics to deploy the web application efficiently.

: The stability of semiconductor catalysts is a very important property in the field of catalytic reactions. Materials necessitate resistance to mechanical abrasion and chemical erosion for better overall performance. In this work, high crystallinity BiOCl nanosheets were prepared by a simple hydrothermal method. The photocatalysts demonstrate full UV light absorption ability and excellent photocatalytic norfloxacin degradation performance. 84 % of highly toxic norfloxacin were photocatalytically eliminated within 180 min. The internal structure and surface chemical state of BiOCl were analyzed by SEM, TEM, Raman, FTIR, UV-vis, XPS, and other techniques. Such high crystallinity makes BiOCl molecules closely arranged and the molecular chains strongly connected, thus exhibiting a high level of photocatalytic stability and recyclability.

UHPC is a type of cement-based composite used in new construction and/or rehabilitation of existing buildings to extend service life. It is a novel composite material that can serve as an alternative to concrete construction in hostile climates. Following decades of study and production, a diverse variety of commercial UHPC compositions are now available globally to meet the rising number of applicants and demand for high-quality building materials. Although UHPC offers major benefits over normal concrete, its utilization is restricted due to restrictive design rules and exorbitant costs. As a result, a thorough examination of the durability properties of UHPC is required to give important information for material testing requirements and processes, as well as to broaden its practical uses. This report is aimed at increasing basic understanding of UHPC and supporting more UHPC research and applications.

The dependence of the critical temperature $T_c$ of high-temperature superconductors of various families on their composition and structure is proposed. A clear dependence of the critical temperature of high-temperature superconductors (hydrides, Hg- and Y-based cuprates) on the serial number of the constituent elements, their valence and crystal lattice structure has been revealed. For cuprates, it is shown that it is possible to obtain even higher temperatures of superconducting transitions at normal pressure by implanting mercury atoms into the crystal lattice of cuprate.

The oral cavity harbors hundreds of microbial species that are present either as planktonic cells, or incorporated into biofilms. The majority of the oral microbes are commensal organisms. Those that are pathogenic microbes can result in oral infections, and at times initiate systemic diseases. Biofilms that contain pathogens have been challenging to control. Many conventional antimicrobials have proven to be ineffective. Recent advances in science and technology are providing new approaches for pathogen control and containment and methods to characterize biofilms. This perspective provides: 1) A general understanding of biofilm development; 2) A description of emerging chemical and biological methods to control oral biofilms; 3) An overview of high-throughput analytical approaches to analyze biofilms.

The management of the electrical energy still raises a huge interest for end-users at the household level. Home electricity management systems (HEMS) have recently emerged both to warrant uninterruptible power and high power quality, and to decrease the cost of electricity consumption, by either shifting it in off peak time or smoothing it. Such a HEMS requires a bidirectional DC-AC converter, specifically when an energy transfer is required between a storage system and the AC-grid, and vice versa. This article points out the relevance of an innovative topology based on sinusoidal waveforms from the generation of sine half-waves. Such a topology is based on a DC-DC stage equivalent to an adjustable output voltage source and a DC-AC stage (H-bridge) which are in series. The results of a complete experimental procedure prove the feasibility to improve the power quality of the output signals in terms of total harmonic distortion (THD-values about 5%). The complexity of the proposed converter is minimized in comparison with multilevel topologies. Finally, wide band-gap semiconductor devices (SiC MOSFETs) are helpful both to warrant the compactness and the high efficiency (about 96%) of the bidirectional converter, whatever its operation mode (inverter or rectifier mode).

The relationship between the structure characteristics and performances of coal based hydrogenation isomeric base oil (CTL) and metallocene catalyzed coal based polyalphaolefin (mPAO) base oil was clarified here. CTL and mPAO were compared with typical petroleum based and natural gas based commercial API Class III and IV base oils. Pressurized differential scanning calorimetry (PDSC), Rotary Bomb Oxidation Test (RBOT) and four-balls friction tester were used to evaluate the oxidation stability and lubrication performance of base oils under different working conditions. The sensitivity of different base oils to typical antioxidants and extreme pressure antiwear agents was compared. Specially, the composition and structure of CTL base oil are obviously different from GTL and mineral base oil. The coal-based CTL and mPAO base oils exhibit commendable viscosity-temperature properties, characteristics, coupled with low-temperature fluidity, fire safety, and minimal evaporation loss. The lubricating properties, oxidation stability and the sensitivity to extreme pressure antiwear agents of CTL are close to those of similar base oils. But the sensitivity of CTL to typical antioxidants is relatively poor. Besides, compared with commercial PAO base oil, mPAO has lower isomerization degree and fewer isomerization types. The oxidation stability and sensitivity to typical antioxidants of mPAO base oil are comparable with those of commercial PAO base oil, while its lubrication performance and sensitivity to typical extreme pressure antiwear agents are significantly better than those of commercial PAO base oil.

Two-dimensional (2D) materials show advantages as surface enhanced Raman scattering (SERS) substrate over traditional noble metals, such as chemically inert flat surface and uniform SERS signals. However, due to the low density of free electrons of 2D materials, the enhancement mechanism is mainly restricted to chemical enhancement instead of electromagnetic enhancement, resulting a relatively low enhancement factor. In this work, we reported a sensitive 2D SERS substrate based on chemical vapor deposited MoN nanosheets with electromagnetic enhanced mechanism. The maximum enhancement factor can be 3×105 with a limit of detected concentration of 4×10-8 M, which is comparable to those noble metal SERS substrates without hot spots. The MoN nanosheets show strong surface plasmon resonance in the visible range as evidenced by the UV-vis absorption spectroscopy and first principle calculation. The MoN nanosheets SERS substrates exhibit excellent Raman signal uniformity within the nanosheets. Meanwhile, Distinct thickness dependent sensitivity was observed in the MoN nanosheets, higher sensitivity can be achieved by decreasing the thickness of the nanosheets. Furthermore, the MoN nanosheets SERS substrate also show high thermal stability, which can be annealed in air for more than 300℃ and maintain its SERS activity. The high stability of MoN nanosheets allows it to be reused for 20 cycles without obvious signal decay. The high sensitivity, stability, reusability and Raman signal uniformity, makes MoN nanosheets an ideal 2D SERS substrate for practical applications.

The nature of the fracture and fragmentation process of concrete medium under blast loading is the transformation process of the medium from continuum to discontinuity, coupled with the significant rate correlation of concrete medium, its mechanical behavior presents a high degree of complexity. Problems such as grid distortion and even negative volume are often encountered in the finite element method and others when solving this problem, while the material point method can effectively avoid these problems. In addition, the widely used HJC concrete constitutive model does not take into account the segmented characteristics of the calculation function for dynamic increasing factor. Therefore, in this paper, firstly, the calculation function for dynamic increasing factor in the HJC concrete model is modified by SHPB experiment, and the improved HJC concrete model is proposed; secondly, the material point method simulation program is developed, and the improved HJC concrete model is embedded into the simulation program; finally, the simulation program is verified by numerical examples, and the results show that the developed simulation program can better simulate the fracture and fragmentation process of concrete medium under blast loading, especially the pulverization characteristics of the medium in the near zone of the load.

University course scheduling (UCS) is one of the most important and time-consuming issues that all educational institutions face yearly. Most of the existing techniques to model and solve UCS problems have applied approximate methods, which are different in terms of efficiency, performance, and optimization speed. Accordingly, this research aims to apply an exact optimization method to provide an optimal solution to the course scheduling problem. In other words, in this research, an integer programming model is presented to solve the USC problem. In this model, hard and soft constraints include the facilities of classrooms, courses of different levels and compression of students' curriculum, courses outside the faculty and planning for them, and the limited time allocated to the professors. The objective is to maximize the weighted sum of allocating available times to professors based on their preferences in all periods. To evaluate the presented model's feasibility, it is implemented using the GAMS software. Finally, the presented model is solved in a larger dimension using a real data set from a college in China and compared with the current program in the same college. The obtained results show that considering the mathematical model's constraints and objective function, the faculty courses' timetable is reduced from 4 days a week to 3 working days. Moreover, master courses are planned in two days, and the courses in the educational groups do not interfere with each other. Furthermore, by implementing the proposed model for the real case study, the maximum teaching hours of the professors are significantly reduced. The results demonstrate the efficiency of the proposed model and solution method in terms of optimization speed and solution accuracy.

African swine fever (ASF) is one of the major threats to pig production, and real-time PCR (qPCR) protocols are integral part of ASF laboratory diagnosis. With the pandemic spread of ASF, commercial kits have risen on the market. In Germany, the kits have to go through an approval process and thus, general validation can be assumed. However, they were never compared to each other. In this study, 12 commercial PCR kits were compared to an OIE recommended method. Samples representing different matrices, genome loads, and genotypes were included in a panel that was tested under diagnostic conditions. The comparison included user-friendliness, internal controls, and the time required. All qPCRs were able to detect ASFV genome in different matrices across all genotypes and disease courses. With one exception, there were no significant differences when comparing the overall mean. The overall specificity was 100 % [95 % CI 87.66 - 100], and the sensitivity was between 95 % and 100 % [95 % CI 91.11 - 100]. As can be expected, variability concerned samples with low genome load. Concluding, all tests were fit for purpose. The test system can therefore be chosen based on compatibility and prioritization of the internal control system.

Although wheat is used worldwide as a staple food, it can give rise to adverse reactions, for which the triggering factors have not been identified yet. These reactions can be caused mainly by kernel proteins, both gluten and non-gluten proteins. Among these latter, -amylase/trypsin inhibitors (ATI) are involved in baker’s asthma and realistically in Non Celiac Wheat Sensitivity (NCWS). In this paper, we report characterization of three transgenic lines obtained from the bread wheat cultivar Bobwhite silenced by RNAi in three ATI genes CM3, CM16 and 0.28. We have obtained transgenic lines showing an effective decrease of the activity of target genes that, although showing a higher trypsin inhibition as a pleiotropic effect, generate a lower reaction when tested with sera of patients allergic to wheat, accounting for the important role of the three target proteins in wheat allergies. Finally, these lines show unintended changes differences in high molecular weight glutenin subunits (HMW-GS) accumulation, involved in technological performances, but do not show differences in terms of yield. The development of new genotypes accumulating a lower amount of proteins potentially or effectively involved in such pathologies, not only offers the possibility to use them as a basis for the production of varieties with a lower impact on adverse reaction, but also to test if these proteins are actually implicated in those pathologies for which the triggering factor has not been established yet.

G protein-coupled receptors (GPCRs) play a key role in many cellular signaling mechanisms, and must select among multiple coupling possibilities in a ligand-specific manner in order to carry out a myriad of functions in diverse cellular contexts. Much has been learned about the molecular mechanisms of ligand-GPCR complexes from Molecular Dynamics (MD) simulations. However, to explore ligand-specific differences in the response of a GPCR to diverse ligands, as is required to understand ligand bias and functional selectivity, necessitates creating very large amounts of data from the needed large-scale simulations. This becomes a Big Data problem for the high dimensionality analysis of the accumulated trajectories. Here we describe a new machine learning (ML) approach to the problem that is based on transforming the analysis of GPCR function-related, ligand-specific differences encoded in the MD simulation trajectories into a representation recognizable by state-of-the-art deep learning object recognition technology. We illustrate this method by applying it to recognize the pharmacological classification of ligands bound to the 5-HT2A and D2 subtypes of class A GPCRs from the serotonin and dopamine families. The ML-based approach is shown to perform the classification task with high accuracy, and we identify the molecular determinants of the classifications in the context of GPCR structure and function. This study builds a framework for the efficient computational analysis of MD Big Data collected for the purpose of understanding ligand-specific GPCR activity.

Typhoon Durian forming over the Western North Pacific Ocean and entering into the South China Sea (SCS), caused extreme and widespread damages in 2006. In this research, sensitivity analyses on different physical parameterization schemes of the Weather Research and Forecasting Atmospheric Model (WRF-ATM) have been utilized to study typhoon Durian. Model accuracy and performance testing were investigated with different initial conditions during the tropical cyclone simulation in the SCS. The initial and boundary conditions (IBCs) for all experiments were derived from the European Centre for Medium Range Weather Forecasts (ECMWF), Re-Analysis Interim (ERAI), and the National Centers for Environmental Prediction (NCEP) with Final (FNL) analysis data compiled through the WRF-ATM model. The sensitivity analysis results indicated a major improvement for the cumulus scheme by using the Grell-Devenyi scheme along with the PBL scheme of Yonsei University, mixed-phase microphysics scheme of the WRF Single Moment 5-class and IBCs for ECMWF-ERAI of TC simulation under the context of Wind-Pressure Relationships. This predicted better track and intensity comparing with these of the Joint Typhoon Warning Center. The results revealed that the TC track and intensity were well simulated by the WSM5-GD combination for the WRF-ATM model with an intensity error of 1.69 hPa for minimum surface level pressure, maximum wind speed of 1.83 knots and average track error of 25 km in 72 hours. The simulations showed that the potential track and intensity error decreased with the delayed IBCs, suggesting that the model simulation is more dependable when the coast is approached by the TC.

Ultrasonic imaging & NDE applications can greatly improve their signal-to-noise ratios (SNR) by driving each transducer (composing piezoelectric arrays) with a spike giving pulsed power of k-Watts, repetitively at a PRF = 5000 spikes/s, by using a HV capacitive-discharge generator. However very-high levels, of pulsed intensities (3-10 A) and voltages (300-700 V) must be considered for a rigorous spike modeling. Even though the consumed "average" power will be small, the intensity through each transducer achieves several amperes, so the pulsed powers delivered by each HV generator can attain levels higher than in CW high-power ultrasonic applications: e.g., up to 5 kW / spike. This is concluded here from a transient modeling of the loaded generator. Then, unforeseen phenomena rise: intense brief pulses of driving power & emitted force in transducers, and non-linearities in driver semiconductors, because their characteristic curves only include linear ranges. But fortunately, piezoelectric devices working in this intense regime do not show serious heating problems, because the average power remains being moderate. Intensity, power and voltage, driving a broadband transducer from a HV capacitive pulser, are calculated to drastically improve (in ≅ 40 dB) the ultrasonic net dynamic range available, with emitted forces ≅ 250 Newtons pp and E/R received pulses of 70 V pp.

Hypertension is one of the most common primary cardiometabolic diseases and is a major contributor to cardiac mortality and morbidity. Furthermore, cardiac risk factors such as obesity and sedentary lifestyle are often seen in hypertensive patients. Regular exercise acts against these risk factors and improves the overall health of an individual. High-intensity interval training appears to do so in a more efficient way. We used a systematic literature review (SLR) approach to provide an overview of the present literature highlighting the cardiovascular advantages of HIIT in hypertensive individuals. We reviewed 4004 articles from reputable journals published between 2013 and August 14, 2023, focusing on 7 selected papers for in-depth analysis. This systematic review revealed the protective effects of HIIT against cardiac complications in hypertension. All the reviewed articles showed a decrease in blood pressure and many other risk variables of cardiovascular diseases. However, guidelines for this exercise are needed for maximum benefits. Therefore, further research on HIIT is necessary to fully harness its potential.