Capital structure decision plays an imperative role in firm’s performance. Recognizing the importance, there has been many studies inspected the rapport of capital structure with performance of firms and findings of those studies are inconclusive. In addition, there is relative deficiency of empirical studies examining the link of capital structure with performance of banks in Bangladesh. This paper attempted to fill this gap. Using panel data of 22 banks for the period of 2005-2014, this study empirically examined the impacts of capital structure on the performance of Bangladeshi banks assessed by return on equity, return on assets and earnings per share. Results from pooled ordinary least square analysis show that there are inverse impacts of capital structure on bank’s performance. Empirical findings of this study is of greater significance for the developing countries like Bangladesh because it will call upon concentration of the bank management and policy makers to pursue such policies to reduce reliance on debt and to accomplish optimal level capital structure. This research also contributes to empirical literatures by reconfirming (or otherwise) findings of previous studies.

Star block-copolymers (SBCs) are macromolecules formed by a number of diblock copolymers anchored to a common central core, being the internal monomers solvophilic and the end monomers solvophobic. Recent studies have demonstrated that SBCs constitute a self-assembling building blocks with specific softness, functionalization, shape, and flexibility. Depending on different physical and chemical parameters the SBCs can behave as flexible patchy particles. In this paper, we study the rotational dynamics of isolated SBCs using a hybrid mesoscale simulation technique. We compare three different approaches to analyse the dynamics: the laboratory frame, the non-inertial Eckart's frame, and a geometrical approximation relating the conformation of the SBC to the velocity profile of the solvent. We find that the geometrical approach is adequate when dealing with very soft systems while in the opposite extreme, the dynamics is best explained using the laboratory frame. On the other hand, the Eckart frame is found to be very general and to reproduced well both extreme cases. We also compare the rotational frequency and the kinetic energy with the definitions of the angular momentum and inertia tensor different from recent publications.

The financial inclusion, including all the people with the finance, is very concerned issue all over the world where Bangladesh is also trying to include all the people with the finance. Bangladesh lies in such a group of countries where only 17.6% - 38.6% adults are presently under the reach of the formal financial services. This is because the present banks and other formal financial modes consider the outcome and profitability in a way that, the rural and non-developed areas are always out of the consideration. But these areas consist of the most population of Bangladesh. And only then financial inclusiveness will be successful in Bangladesh when people from these regions will be under formal financial consideration. The paper seeks for a solution to the issue and presents the Unit Banking System as a probable way towards financial inclusion. For implementing the system in Bangladesh, the system needs a slight modification to cope in Bangladeshi economic condition and address the specific needs without hampering the surroundings. Considering all these, the paper shows the status, problems and key points of financial scenario of inclusion in Bangladesh and shows policy for a Modified Unit banking System.

The bacterial composition of oral samples has traditionally been determined by PCR amplicon sequencing of 16S rRNA genes. Recent amplicon sequence variant (ASV)-based analyses of 16S rRNA genes differ from that based on operational taxonomic unit (OTU) clustering in the way it deals with sequences having potential errors. However, little information is available on its application in oral microbiome studies. Here, we conducted ASV-based analysis of oral microbiome samples using QIIME 2. We investigated the optimal parameters for sequence denoising, using DADA2, and found the trimming of the first 20 nucleotides from 5′-end of both paired reads avoided excessive sequence loss during chimera removal. Truncating reads at positions 240–245 allowed the removal of low-quality sequences while maintaining sufficient length to merge matching paired ends. Taxonomic assignment, using the naïve Bayes classifier trained with the V3-V4 region of reference 16S rRNA sequences in the extended human oral microbiome database (eHOMD), resulted in bacterial compositions similar to those of OTU-based analyses. Contrary to OTU-based clustering, ASV-based analysis showed taxonomic abundance at the genus or species level to not differ significantly in tongue microbiomes, regardless of brushing. QIIME 2 can, therefore, be a standard pipeline for ASV-based analysis of oral microbiomes.

For many decades, X-ray diffraction (XRD) has been used for material characterization. With the recent development in material science understanding and technology, various new materials are being developed, which requires upgrading the existing analytical techniques such that intricate problems can be solved. Although, XRD is a well-established non-destructive technique, it still requires further improvements in its characterization capabilities, especially when dealing with complex mineral structures. The present review conducts comprehensive discussions on atomic crystal structure, XRD principle, its applications, uncertainty during XRD analysis, and required safety precautions, all in one place. It further discusses the future research directions, especially the use of artificial intelligence and machine learning tools for improving the effectiveness and accuracy of XRD technique for mineral characterization. It has been focused that how XRD patterns can be utilized for a thorough understanding of the crystalline structure, size, and orientation, dislocation density, phase identification, quantification, and transformation, information about lattice parameters, residual stress, and strain, and thermal expansion coefficient of materials. All these important discussions on XRD for mineral characterization are compiled in this short yet comprehensive review that would benefit specialists and engineers in the chemical, mining, iron, metallurgy, and steel industries.

Deep neural networks (DNNs) have made a huge impact in the field of machine learning by providing unbeatable humanlike performance to solve real-world problems such as image processing and natural language processing (NLP). Convolutional neural network (CNN) and recurrent neural network (RNN) are two typical architectures that are widely used to solve such problems. Time sequence-dependent problems are generally very challenging, and RNN architectures have made an enormous improvement in a wide range of machine learning problems with sequential input involved. In this paper, different types of RNN architectures are compared. Special focus is put on two well-known gated-RNN’s Long Term Short Memory (LSTM) and Gated Recurrent Unit (GRU). We evaluated these models on the task of force estimation system in pouring. In this study, four different models including multi-layers LSTM, multi-layers GRU, single-layer LSTM and single-layer GRU) were created and trained. The result suggests that multi-layer GRU outperformed other three models.

In this study, a basic study was performed to analyze the seasonal temperature status of a research room in the Global Environment Research Building where ceiling-embedded indoor units are installed to study the room temperature status of the building as well as to improve its thermal environment. In addition, a direction for improvement of the indoor thermal environment in the winter was proposed through a CFD (computational fluid dynamics) simulation and was proven by an additional experiment. Through the results of this study, it appeared that if the ceiling-embedded indoor unit was installed in the small indoor space without considering the thermal vulnerability of its perimeter boundary, the air temperature of the upper part was greatly different from that of the bottom part in the winter. Hence, in this study, as a means to improve it, convectors were installed to minimize the effect of the external thermal environment and angle-controllable air flowing fans were installed to mitigate the stratification distribution. With such result, it was intended to present the essential data for improvement of the thermal environment as well as conservation of heating energy in the winter for buildings by reviewing the use of the ceiling-embedded indoor unit in the future.

The Solvency II regulatory framework specifies procedures and parameters for determining solvency capital requirements (SCRs) for insurance companies. The proposed standard SCR calculations involve two steps. The Value–at–Risk (VaR) of each risk driver is measured and, in a second step, all components are aggregated to the company’s overall SCR, using the Standard Formula. This formula has two inputs: the VaRs of the individual risk drivers and their correlations. The appropriate calibration of these input parameters has been the purpose of various Quantitative Impact Studies that have been conducted during recent years. This paper demonstrates that the parameter calibration for the equity–risk module—overall, with about 25%, the most significant risk component—is seriously flawed, giving rise to spurious and highly erratic parameter values. As a consequence, an implementation of the Standard Formula with the currently proposed calibration settings for equity–risk is likely to produce inaccurate, biased and, over time, highly erratic capital requirements.

This study sought to investigate steel frames’ performance with dual lateral loader system (Frame bending + bracings of divergent and convergent) in near and far filed to fault. In order to this, four categories of steel frame with dual system with 8, 10 and 12 story are designed with average formation based on existing seismic regulation in 2800 standard of Iran and tenth chapter of national regulations of construction (planning and performing steel construction). Time history non-linear dynamic analysis under the effect of near and far field earthquakes has been done on plan’s models. Then the maximum of floors’ dislocation, floors’ drift, roof dislocation, base shear and energy curves of frames are shown and compared with each other. All non-linear time history analyses have been accomplished using PERFORM 3D software.

Social networking applications such as Twitter have increasingly gained significance in terms of socio-economic, political, and religious as well as entertainment sectors. This in turn, has witnessed a wide gamut of information explosion in the social networking realm that can tend to be both useful as well as misleading at the same point of time. Spam detection is one such solution that caters to this problem through identification of irrelevant users and their data. However, existing research has so far laid primary focus on user profile information through activity detection and relevant techniques that may underperform when these profiles exhibit characteristics of temporal dependency, poor reflection of generated content from the user profile, etc. This is the primary motivation for this paper that addresses the aforementioned problem of user profiles by focusing on both profile information and content-based spam detection. To this end, this work delivers three significant contributions. Firstly, exhaustive use of Natural language processing (NLP) techniques has been rendered towards creation of a new comprehensive dataset with a wide range of content-based features. Secondly, this dataset has been fed into a customized state-of-art hybrid machine learning model that has been exclusively built using a combination of both machine learning and deep learning techniques. Extensive simulation based analysis not only records over 98% accuracy but also establishes the practical applicability of this proposal by proving that modeling based on the mixed profile and content-generated data is more capable of spam detection in contrast to each of these standalone approaches. Finally, a novel methodology based on logistic regression is proposed and supported by analytical formulations. This paves the way for the custom-built dataset to be analyzed and corresponding probabilities to be obtained that differentiate legitimate users from spammers. The obtained mathematical outcome can henceforth be used for future prediction of user categories through appropriate parameter tuning for any given dataset. This makes our method a truly generic one capable of identifying and classifying different user categories.

The evolving multiphase induction generators (MPIG) with more than three phases are receiving prominence in high power generation systems. This paper aims at the development of a comprehensive model of the wind turbine driven seven-phase induction generator (7PIG) along with necessary the power electronic converters and controller for grid interface. The dynamic model of the system is developed in Maltlab/Simulink. Synchronous reference frame phase-locked loop (SRFPLL) system is incorporated for grid synchronization. The modeling aspects are detailed and the system response is observed for various wind velocities. The effectiveness of seven phase induction generator is demonstrated with the fault tolerant capability and high output power with reduced phase current when compared to conventional 3-phase wind generation scheme. The response of the PLL is analyzed and the results are presented.

The optimization of guide vane closing schemes (OGVCS) of pumped storage hydro unit (PSHU) is the research field of cooperative control and optimal operation of pumped storage, wind power and solar power generation. This paper presents a OGVCS model of PSHU considering the rise rate of the unit rotational speed and the specific node pressure of each hydraulic unit, as well as various complicated hydraulic and mechanical constraints. OGVCS model is formulated as a multi-objective optimization problem to optimize conflictive objectives, i.e., unit rotational speed and water hammer pressure criteria. In order to realize the efficient solution of the OGVCS model, an enhanced multi-objective bacterial-foraging chemotaxis gravitational search algorithm (EMOBCGSA) is proposed to solve this problem, which adopts population reconstruction, adaptive selection chemotaxis operator of local searching strategy and Elite archive set to efficiently solve the multi-objective problem. Especially, novel constraints-handling strategy with eliminating and local search based on violation ranking is used to balance various hydraulic and mechanical constraints. Finally, simulation cases of complex extreme operating conditions (i.e., load rejection and pump outage) of ‘single tube-double units’ type PSHU system are conducted to verify the feasibility and effectiveness of the proposed EMOBCGSA in solving OGVCS problem. The simulation results indicate that the proposed EMOBCGSA can provide lower rise rate of the unit rotational speed and smaller water hammer pressure than other method established recently while considering various complex constraints in OGVCS problem.

The paper presents the design and the implementation of different advanced control strategies that are applied to a nonlinear model of a thermal unit. A data–driven grey–box identification approach provided the physically meaningful nonlinear continuous–time model, which represents the benchmark exploited in this work. The control problem of this thermal unit is important since it constitutes the key element of passive air conditioning systems. The advanced control schemes analysed in this paper are used to regulate the outflow air temperature of the thermal unit by exploiting the inflow air speed, whilst the inflow air temperature is considered as an external disturbance. The reliability and robustness issues of the suggested control methodologies are verified with a Monte–Carlo analysis for simulating modelling uncertainty, disturbance and measurement errors. The achieved results serve to demonstrate the effectiveness and the viable application the suggested control solutions to air conditioning systems. The benchmark model represents one of the key issues of this study, which is exploited for benchmarking different model–based and data–driven advanced control methodologies through extensive simulations. Moreover, this work highlights the main features of the proposed control schemes, while providing practitioners and heating, ventilating and air conditioning engineers with tools to design robust control strategies for air conditioning systems.

In this work, the Pumped Storage Unit (PSU) is proposed to be integrated with wind-thermal generation system owned by a company whose aim is to maximize its profit through optimal self-scheduling of its units by finding the best bidding strategy in day-ahead energy market. The mathematical formulation of the scenario based unit-commitment and coordinated trading problem is formulated as a stochastic mixed integer linear program. The formulation takes into account several uncertain parameters; such as the wind power generation, energy market prices, and imbalances up/down prices. The expected total profit obtained from energy trading with and without coordinating pumped storage system (PSS) with thermal-wind generation system were compared, and a significant improvement in profit resulted from coordination was observed. Furthermore, coordination between PSS and wind-thermal generation improve the conditional value at risk (CVaR) which monitors the biding risk level.

Injuries to the ligaments of the knee are extremely common among athletes who participate in high-risk sports, or any sport that requires frequent cutting motions, jumping, or contact. In order to determine the best way to heal these injuries, it is important to understand not just the pathology of the injury, but also the biomechanical factors that are affected, including stability and steadiness. While many studies have been done to examine the stability of healthy knees, there is little to no existing literature on stability of knees afflicted by injury. In order to surpass this obstacle, static steadiness and dynamic stability data was collected using the Lockhart Monitor phone application and Xsens accelerometers, respectively, both before and after completion of a course of physical therapy in a patient with a grade 2 medial collateral ligament (MCL) tear. These results were then used to determine the degree to which the prescribed physical therapy protocol was effective in healing the MCL, which can be useful for tweaking the individual protocol for future conservative treatment and management of the injury.

As a procedure deriving UH (unit hydrograph), the root selection method necessitates only storm runoff data. However, this method must deal with the uncertainty related to the noise fluctuation of runoff ordinates and derive one optimal UH from many storms. This study proposes a procedure that applies the Savitzky-Golay filter to smooth the noise fluctuation of the runoff ordinates and uses the linear combination of UHs from individual storms to derive an optimal UH. The proposed method is applied to the storms of the Nenagh River basin in Ireland. The applicability of the Savitzky-Golay filter for smoothing the noise fluctuation of storm runoffs is examined by means of the Nash-Sutcliffe efficiency index. Furthermore, the root selection method is extended to also estimate IUHs. The results show that the adoption of the Savitzky-Golay filter improves the applicability of the root selection method and that the optimal UH predicts accurately the time-to-peak and peak discharge.

The ability to express and recognize emotion via facial expressions is well known to change with age. The present study investigated the differences in the facial recognition and facial expression of the elderly (n = 57) and the young (n = 115) and measure how each group uses different facial muscles for each emotion with Facial Action Coding System (FACS). In facial recognition task, the elderly did not recognize facial expressions better than young people and reported stronger feelings of fear and sad from photographs. In making facial expression task, the elderly rated all their facial expressions as stronger than the younger, but in fact, they expressed strong expressions in fear and anger. Furthermore, the elderly used more muscles in the lower face when making facial expressions than younger people. These results help to understand better how the facial recognition and expression of the elderly change, and show that the elderly do not effectively execute the top-down processing concerning facial expression.

Shear connectors are used in steel beam–concrete slabs of composite frame and bridge structures to transfer shear force according to design loads. The existing Y-type perfobond rib shear connectors are designed for girder slabs of composite bridges. Therefore, the rib and transverse rebars of the conventional Y-type perfobond rib shear connectors are extremely large for the composite frames of building structures. We performed push-out tests of stubby Y-type perfobond rib shear connectors for composite frames. These shear connectors have relatively small ribs than conventional Y-type perfobond rib shear connectors. To confirm the shear resistance of these stubby shear connectors, we performed an experiment by using transverse rebars D13 and D16. The results indicate that these shear connectors have suitable shear strength and ductility for application in composite frame structures. The shear strengths obtained using D13 and D16 were not significantly different. However, the ductility of the shear connectors with D16 was 45.1% higher than that of the shear connectors with D13.

Direct sizing criteria represent useful tools in the design of dissipative bracing systems for the advanced seismic protection of existing frame structures, especially when incorporated dampers feature a markedly non-linear behaviour. An energy-based procedure is proposed herein to this aim, focusing attention on systems including fluid viscous devices. The procedure starts by assuming prefixed reduction factors of the most critical response parameters in current conditions, which are evaluated by means of a conventional elastic finite element analysis. Simple formulas relating the reduction factors to the equivalent viscous damping ratio of the dissipaters, ξ_eq, are proposed. These formulas allow calculating the ξ_eq values that guarantee the achievement of target factors. Finally, the energy dissipation capacity of the devices is deduced from ξ_eq, finalizing their sizing process. A detailed description of the procedure is presented in the article, by distinguishing the cases where the prevailing structural deficiencies are represented by poor strength of the constituting members, from the cases having excessive horizontal displacements. A demonstrative application to the retrofit design of a reinforced concrete gym building is then offered to explicate the steps of the sizing criterion in practice, as well as to evaluate the enhancement of seismic response capacities generated by the installation of the dissipative system.

The mitigation of NLOS (non-line-of-sight) propagation conditions is one of main challenges in wireless signals based indoor localization. When RFID localization technology is applied in applications, RSS fluctuates frequently due to the shade and multipath effect of RF signal, which could result in localization inaccuracy. In particularly, when tags carriers are walking in LOS (line-of-sight) and NLOS hybrid environment, great attenuation of RSS will happen, which would result in great location deviation. The paper proposes an IMU-assisted (Inertial Measurement Unit) RFID based indoor localization in LOS/NLOS hybrid environment. The proposed method includes three improvements over previous RSS based positioning methods: IMU aided RSS filtering, IMU aided LOS/NLOS distinguishing and IMU aided LOS/NLOS environment switching. Also, CRLB (Cramér-Rao Low Bound) is calculated to prove theoretically that indoor positioning accuracy for proposed method in LOS/NLOS mixed environment is higher than position precision of only use RSS information. Simulation and experiments are conducted to show that proposed method can reduce the mean positioning error to around 3 meters without site survey.

Traditionally, palliative care (PC) systems focused on the needs of advanced cancer patients. But, most patients needing PC have end-stage organ diseases. Similarly, PC models focused on the needs of patients in hospice or at home; however, in most cases PC is provided in acute hospitals. Indeed, the symptom burden that these patients experience in the last year of life frequently forces them to seek care in Emergency Department. The majority of them are admitted to the hospital and many die. This issue poses important concerns. Despite the efforts of attending healthcare professionals, inhospital patients do not receive optimal care near the end-of-life. Also, evidence is emerging that delay in identifying patients needing PC have a detrimental impact on their quality of life (QoL). Therefore, there is an urgent need to early and properly identify these patients among those hospitalized. Several trials reported the efficacy of PC in improving the QoL in these patients. Each hospital should ensure that a multidisciplinary PC team is available to support attending physicians to achieve the best QoL for both PC patients and their families. This review discusses the role and the impact of inhospital PC in patients with end-stage disease or advanced cancer.

The SARS (severe acute respiratory syndrome)-CoV (Coronavirus)-2 S(spike)-protein mRNA/cDNA currently being used as vaccines are antigenic but not antigens against SARS-CoV-2, that causes COVID (Coronavirus Disease) -19. Furthermore, the mRNA and cDNA antigenic vaccines also have potentials for homologous as well as heterologous recombination, primarily into the somatic cell DNA of the vaccine recipients. On the contrary, a SARS-CoV-2 RBD-protein antigen, a part of the S-protein, will directly stimulate antibody production against SARS-CoV-2. Hence, a vaccine composed of SARS-CoV-2 RBD-protein as a safer, fast acting, and effective vaccine against SARS-CoV-2 and thus against COVID-19. This is also useful for some immune compromised individuals.

With the introduction of the IEC 61850 standard, the path is set for a single communication topology covering all substation levels. The standard has the potential to change the way substations are designed, build, tested and maintained. This means that the key segment of the substation, its protection system, will go through a transition period with the end goal of having a digitalized substation where all information exchange is performed over an Ethernet communication bus. The goal of this paper is to analyse the performance impact of the IEC 61850-9-2LE on the protection system. To do this, a laboratory hardware-in-the-loop test setup is developed representing traditional, hybrid and digital substation topology. This setup served to simulate faults and create transient waveforms in an extended IEEE 123 node test system, which were then used to detect the reaction times of protection relay devices. To verify protection relay results significant number of tests are performed clearly showing benefits which can be gained by distribution system digitalization.

The tumor microenvironment is known to have increased levels of cytokines and metabolites, such as glutamate, due to their release from the surrounding cells. A normal cell around the tumor that responds to the inflammatory environment is likely to be subsequently altered. We will discuss how these abnormalities will support tumor survival via the actions of gap junctions (GJs) and hemichannels (HCs) which are composed of hexamer of connexin 43 (Cx43) protein. In particular, we will discuss how GJ intercellular communication (GJIC) in glioma cells, the primary brain tumor, is a regulatory factor and its attenuation leads to tumor invasion. In contrast, the astrocytes, which are normal cells around the glioma, are "hijacked" by tumor cells, either by receiving the transmission of malignant substances from the cancer cells via GJIC, or perhaps via astrocytic HC activity through the paracrine signaling which enable the delivery of these substances to the distal astrocytes. This astrocytic signaling would promote tumor expansion in the brain. In addition, brain metastasis from peripheral tissues has also been known to be facilitated by GJs formed between cerebral vascular endothelial cells and cancer cells. Astrocytes and microglia are generally thought to eliminate cancer cells at the blood brain barrier. In contrast, some reports suggest they facilitate tumor progression as tumor cells take advantage of the normal functions of astrocytes that support the survival of the neurons by exchanging nutrients and metabolites. In summary, GJIC is essential for the normal physiological function of growth and allowing the diffusion of physiological substances. Therefore, whether GJIC is cancer promoting or suppressing may be dependent by what permeates through GJs, when it is active, and to which cells. The nature of GJs, which has been ambiguous in brain tumor progression, will need to be re-visited and understood together with new findings on Cx proteins and HC activities.

The long term sustainability and longevity of the business life cycle depends on correct understanding of the contextual constituents, triggers and dynamics, pre-startup planning, strategy and financial forecasting where business plans are developed to understand and forecast project viability, pitch ideas and secure funding. At the same time there is a lack of one page startup business model. Identifying this need, a ‘startup business strategy frame’ has been developed through learnings and encompassing design thinking, the business canvas and other strategy models and approaches. It provides a logical sequential flow and connects value drivers on environmental, strategic including operational and financial levels of proposed startup in a sequential format. To arrive at the frame as a logical conclusion a website www.strategizestartup.com is developed to build startup business model and plans in a time and cost effective process. The website assists the startups at each stage through a work and guidebook. The website takes the user from creative ideation by charting the context to build the strategy and measuring the financial impact. This startup strategy model will alleviate the problems for the first and second stage entrepreneurs to ideate creatively and strategizing. It also eradicates the issues related to reading and understanding long plans which could be an exhaustive and cumbersome process.

Very little is known about laboratory confirmed blood stream infections (LCBIs) in neonatal intensive care units (NICUs) in resource-limited settings. The aim of this cohort study was to determine the incidence, risk factors, and causative agents of LCBIs in a level-2 NICU in India. The diagnosis of LCBIs was established using the Centre for Disease Control, USA criteria. A predesigned questionnaire containing risk factors associated with LCBIs was filled-in. A total of 150 neonates (43% preterm) were included in the study. The overall incidence of LCBIs was 31%. The independent risk factors for LCBIs were: preterm neonates (relative risk (RR) 2.23), duration of NICU stay more than 14 days (RR 1.75), chorioamnionitis in the mother (RR 3.18), premature rupture of membrane in mothers (RR 2.32), neonate born through meconium-stained amniotic fluid (RR 2.32), malpresentation (RR 3.05), endotracheal intubation (RR 3.41), umbilical catheterization (RR 4.18), and ventilator-associated pneumonia (RR 3.17). The initiation of minimal enteral nutrition was protective from LCBIs (RR 0.22). The predominant causative organisms were gram-negative pathogens (58%). The results of the present study can be used to design antibiotic interventions to reduce LCBIs in resource-limited settings.

Lead-acid batteries utilised in electrical substations release hydrogen and oxygen when these are charged. These gases could be dangerous and cause a risk of fire if they are not properly ventilated. Therefore, this research seeks to design and implement a network control panel for heating, ventilation, and air-conditioning systems (HVACS). This is done using a specific range of controllers, which have more than thirty loops of proportional, integral and derivative (PID) control to achieve a cost-effective design. It performs the required function of extracting hydrogen, oxygen, and maintaining the desired temperature of the battery storage room within the recommended limits (i.e. 25°C ±1°C tolerance) without compromising quality as set out in the user requirement specification in Appendix-A. The system control panel allows the user to access control parameters such as changing temperature set-points, fan-speed, sensor database amongst others. The hardware is configured to detect extreme hydrogen and oxygen gas content in the battery room and ensure that the HVACS extract the gas content to the outside environment. The results of the system show that the network control panel effectively operates as per the recommended system requirements. Therefore, the effective operation of the HVACS ensures sufficient gas ventilation, thus mitigating the risk of fire in a typical battery storage room. Furthermore, the effective operation of HVACS enhances battery lifespan because of regulated operating temperature, which is conducive to minimise the effect of sulfation in lead acid Batteries (LABs).

Due to limitation of natural sand from rivers and seas, artificial sand production from large stones or rocks is being increased. However, this sand manufacturing process is dangerous and causes several social problems such as high level of unwanted vibrations or noises. This study investigates vibration characteristics of sand and screen units in artificial sand production plant whose actuating operation is multiple with several different exciting frequencies. As a first step, vibration levels are measured at the sand and screen unit positions using accelerometers in time and frequency domains. The measurement is carried out at two different conditions: activating sand unit only and operating entire facilities such as stone crusher. Vibration signals acquired from several locations of the sand and screen units of the plant are collected and analyzed from waveforms and spectrums of the signals. It is identified that the vibration acceleration level of the screen unit is higher than that of the sand unit. In addition, it is found from the acceleration signals measured at plant office and shipping control center those places are far away from the plant location that the beating phenomenon is occurred by close driving frequencies for several sand units. In this work, the vibration caused from the beating is significantly reduced by adjusting the driving frequencies for the sand units so that they are sufficiently scattered to avoid the beating.

This article aims to solve the problem of robust supervision of a reverse osmosis desalination system (RO-DS) with two models, external model and bond graph model. The structure of an industrial system from the point of view of the external model operates according to several modes of operation (degraded and normal). For this external model, we cannot locate the faults since we are talking about a global operation of the system. The possible solution for the development of research was to use the multidisciplinary model called bond graph. This model by its graphic nature and using a unified language makes it possible to model the industrial system element by element from where it helps the user not only to detect the faults but also to locate them when they appear in the system. The results suggest that the use of the bond graph model for alarm 02 is a reverse osmosis error (RO1); these phenomena are readable on the bond graph model and can be quantified by equations. The equation of the model of this reverse osmosis (RO1) is found in the residual equations (r5, r6 and r7), so that these residues will be sensitive to this rupture. The possible solution during research development was to use the bond graph model to supplement information with physical knowledge and to locate faults. This article also describes the operating safety (by minimizing false alarms and non-detections as well as delays in fault detection) of the desalination system by using the bond graph model described in Linear Fractional Transformation (LFT) form for enable it to manage the robust supervision of a desalination system. An approach based on (LFT-BG) is developed to monitor tank leakage (Cu) and reverse osmosis (RO1 and RO2) faults or valve level (V1 and V2) closures and membrane clogging reverse osmosis (Rm1 and Rm2) that can occur in the reverse osmosis desalination system (RO-DS).

Over the past few years, the importance of video surveillance in securing the national critical infrastructure has significantly increased, whose applications include detecting failures and anomalies. Accompanied by video proliferation is the increasing number of attacks against surveillance systems. Among the attacks, false frame injection (FFI) attacks that replay video frames from a previous recording to mask the live feed has the highest impact. While many attempts have been made to detect FFI frames using features from the video feeds, video analysis is computationally too intensive to be deployed on-site for real-time false frame detection. In this paper, we investigate the feasibility of FFI attacks on compromised surveillance systems at the edge and propose an effective technique to detect the injected false video and audio frames by monitoring the surveillance feed using the embedded Electrical Network Frequency (ENF) signals. An ENF operates at a nominal frequency of 60 Hz/50 Hz based on its geographical location and maintains a stable value across the entire power grid interconnection with minor fluctuations. For surveillance system video/audio recordings connected to the power grid, the ENF signals are embedded. The time-varying nature of the ENF component is used as a forensic application for authenticating the surveillance feed. The paper highlights the ENF signal collection from a power grid creating a reference database and ENF extraction from the recordings using conventional short-time Fourier Transform and spectrum detection for robust ENF signal analysis in the presence of noise and interference caused in different harmonics. The experimental results demonstrate the effectiveness of ENF signal detection and/or abnormalities for FFI attacks.

Primary varicella-zoster virus (VZV) infection causes varicella (chickenpox) and the establishment of a lifelong latent infection in ganglionic neurons. VZV reactivates in about one-third of infected individuals to cause herpes zoster, often accompanied by neurological complications. The restricted host range of VZV and, until recently, the lack of suitable in vitro models to study VZV latency have seriously hampered molecular studies of viral latency. Nevertheless, recent technological advances facilitated a series of exciting studies that resulted in the discovery of a VZV latency-associated transcript (VLT) and have redefined our understanding of VZV latency and factors that initiate reactivation. Together, these findings pave the way for a new era of research that may finally unravel the precise molecular mechanisms that govern latency. In this review, we will summarize the implications of recent discoveries in the VZV latency field from both a virus and host perspective and provide a roadmap for future studies.

Stroke remains a major cause of death and disability in the United States and around the world. Solid safety and efficacy profiles of novel stroke therapeutics have been generated in the laboratory, but most failed in clinical trials. Investigations into the pathology and treatment of the disease remain a key research endeavor in advancing scientific understanding and clinical applications. In particular, cell-based regenerative medicine, specifically stem cells transplantation, may hold promise as stroke therapy because grafted cells and their components may recapitulate the growth and function of the neurovascular unit, which arguably represents the alpha and omega of stroke brain pathology and recovery. Recent evidence has implicated mitochondria, organelles with a central role in energy metabolism and stress response, in stroke progression. Recognizing that stem cells offer a source of healthy mitochondria, potentially transferrable into ischemic cells, may provide a new therapeutic tool. To this end, deciphering cellular and molecular processes underlying dysfunctional mitochondria may reveal innovative strategies for stroke therapy. Here, we review recent studies capturing the intimate participation of mitochondrial impairment in stroke pathology, and showcase promising methods of healthy mitochondria transfer into ischemic cells, to critically evaluate the potential of mitochondria-based stem cell therapy for stroke.

At least six small alternate-frame open reading frames (ORFs) overlapping well-characterized SARS-CoV-2 genes have been hypothesized to encode accessory proteins. Researchers have used different names for the same ORF or the same name for different ORFs, resulting in erroneous homological and functional inferences. We propose standard names for these ORFs and their shorter isoforms, developed in consultation with the Coronaviridae Study Group of the ICTV. We recommend calling the 39 codon Spike-overlapping ORF ORF2b; the 41, 57, and 22 codon ORF3a-overlapping ORFs ORF3c, ORF3d, and ORF3b; the 33 codon ORF3d isoform ORF3d-2; and the 97 and 73 codon Nucleocapsid-overlapping ORFs ORF9b and ORF9c. Finally, we document conflicting usage of the name ORF3b in 32 studies, and consequent erroneous inferences, stressing the importance of reserving identical names for homologs. We recommend that authors referring to these ORFs provide lengths and coordinates to minimize ambiguity due to prior usage of alternative names.

Background: New open-source electric-grid planning models have the potential to improve power system planning and bring a wider range of stakeholders into the planning process for next-generation, high-renewable power systems. However, it has not yet been established whether open-source models perform similarly to the more established commercial models for power system analysis. This reduces their credibility and attractiveness to stakeholders, postponing the benefits they could offer. In this paper, we report the first model intercomparison between an open-source power system model and an established commercial production cost model. Results: We compare the open-source Switch 2.0 to GE Energy Consulting’s Multi Area Production Simulation (MAPS) for production-cost modeling, considering hourly operation under 17 scenarios of renewable energy adoption in Hawaii. We find that after configuring Switch with similar inputs to MAPS, the two models agree closely on hourly and annual production from all power sources. Comparing production gave a coefficient of determination of 0.996 across all energy sources and scenarios, indicating that the two models agree on 99.6% of the variation. For individual energy sources, the coefficient of determination was 69–100. Conclusions: Although some disagreement remains between the two models, this work indicates that Switch is a viable choice for renewable integration modeling, at least for the small power systems considered here. Although some disagreement remains between the two models, this work indicates that Switch is a viable choice for renewable integration modeling, at least for the small power systems considered here.

For most professionals to be successful in the current job market, they need some entrepreneurial skills (ES). This study aimed to describe and systematize these skills, considering the current globalization and digital transformation phenomena. The documental analysis and the critical reflection on the collected data allowed us to identify the socio-economic and socio-cultural reasons for the relevance of this problem. Consequently, to elaborate a frame of reference that is intended to be adequate to the needs of the professionals of the current global and digital era. The results pointed to a tripartite ES model - to be open to novelty, to create solutions to emerging problems, and to communicate effectively - which integrates the following skills: creativity and innovation, the spirit of initiative, self-efficacy and resilience, strategic planning, and evaluation, resolution of problems and decision-making, transformational leadership, clear and visual communication, teamwork and networking, and digital communication. In the continuation of this study, an ES scale will be created and validated according to this model, which will make it possible to measure the degree of development of these competencies.

The article presents formal proof that the Special Theory of Relativity is wrong, that is, the interpretation of the mathematics on which STR is based, proposed by Einstein is incorrect. The article shows that there are infinitely many kinematics in which one-way speed of light is always equal to c. The kinematics of Special Theory of Relativity (STR) is only one of those infinitely many kinematics. It presents that mathematics on which STR kinematics is based can be interpreted differently and this leads to other conclusions on the properties of this kinematics. In this article, the whole class of linear transformations of time and coordinate was derived. Transformations were derived on the assumption that conclusions from Michelson-Morley’s and Kennedy-Thorndikea’s experiments are met for the observer from each inertial frame of reference, i.e. that the mean velocity of light in the vacuum flowing along the way back and forth is constant. It was also assumed that there is at least one inertial frame of reference, in which the velocity of light in a vacuum in each direction has the same value c, and the space is isotropic for observers from this distinguished inertial frame of reference (universal frame of reference). Derived transformations allow for building many different kinematics according to Michelson-Morley’s and Kennedy-Thorndikea’s experiments. The class of transformations derived in the study is a generalization of transformations derived in the paper [10], which consists in enabling non-zero values of parameter e(v). The idea of such a generalization derives from the person, who gave me this extended transformations class for analysis and publication.

In this paper, we revisit a modified version of the classical Whitehead's theory of gravity in which all possible bilinear forms are considered to define the corresponding metric. Although, this is a linear theory that fails to give accurate results for the most sophisticated predictions of general relativity, such as gravity waves, it can still provide a convenient framework to analyze some new phenomena in the Solar System. In particular, recent development in the accurate tracking of spacecraft and the ephemerides of planetary positions have revealed certain anomalies in relation with our standard paradigm for celestial mechanics. Among them the so-called flyby anomaly and the anomalous increase of the astronomical unit play a prominent role. In the first case the total energy of the spacecraft changes during the flyby and a secular variation of the semi-major axis of the planetary orbits is found in the second anomaly. For this to happen it seems that a net energy and angular momentum transfer is taken place among the orbiting and the central body. We evaluate the total transfer per revolution for a planet orbiting the Sun in order to predict the astronomical unit anomaly in the context of Whitehead's theory. This could lead to a more deeply founded hypothesis for an extended gravity model.

Road networks are monitored to evaluate their decay level and the performances regarding ride comfort, vehicle rolling noise, fuel consumption, etc. In this study, an Inertial Measurement Unit is proposed by using a low-cost three-axis Micro-Electro-Mechanical Systems accelerometer and a GPS instrument, which are connected to a Raspberry Pi Zero W board and embedded inside a vehicle to monitor indirectly the road condition. To assess the level of pavement decay, the comfort index awz defined by the ISO 2631 standard was considered. Considering 21 km of roads, with different levels of pavement decay, validation measures made using the proposed IMU, another pre-assembled IMU, and a Road Surface Profiler were performed. Therefore, comparisons between awz determined with accelerations measured on the two different IMU are made; in addition, also correlations between awz, International Roughness Index (IRI), and Ride Number (RN) were performed. The results were shown very good correlations between the awz calculated with the proposed IMU and ones in the other IMU. In addition, the correlations between awz and IRI and RN were showed promising results, considering the use and the costs of the proposed IMU as a reliable method to assess the pavements decay in road networks where the use of traditional systems is difficult and/or not cheap.

Much evidence has accumulated over the past decade in favor of a significant association between dysbiosis, neuroinflammation and neurodegeneration. Presently, the pathogenetic mechanisms triggered by molecules produced by the altered microbiota, also responsible for the onset and evolution of Alzheimer Disease will be described. Our attention will be focused on the role of astrocytes and microglia. Numerous studies have progressively demonstrated how these glial cells are important to ensure an adequate environment for neuronal activity in healthy conditions. Furthermore, it is becoming evident how both cell types can mediate the onset of neuroinflammation and lead to neurodegeneration when subjected to pathological stimuli. Based on this information, the role of major microbiota products in shifting the activation profiles of astrocytes and microglia from a healthy to a diseased state will be discussed focussing on Alzheimer Disease pathogenesis.

In this paper, we observe that if X is a set and (Bin(X), □) is the semigroup of binary systems on X, then its center ZBin(X) consists of the locally-zero-semigroups and that these can be modeled as (simple) graphs and conversely. Using this device we show that we may obtain many results of interest concerning groupoids by reinterpreting graph theoretical properties and at the same time results on graphs G may be obtained by considering them as elements of centers of the semigroups of binary systems (Bin(X), □) where X = V(G), the vertex set of G.

One of the most crucial and economically beneficial tasks for energy customer is peak load curtailment. On account of the fast response of renewable energy resources (RERs) such as photovoltaic (PV) units and battery energy storage system (BESS), this task is closer to be efficiently implemented. Depends on the customer peak load demand and energy characteristics, the feasibility of this strategy may warry. When adaptive neuro-fuzzy inference system (ANFIS) is exploited for forecasting, it can provide many benefits to address the above-mentioned issues and facilitate its easy implementation, with short calculating time and re-trainability. This paper introduces a data driven forecasting method based on fuzzy logic for optimized peak load reduction. First, the amount of energy generated by PV is forecasted using ANFIS which conducts output trend, and then, the BESS capacity is calculated according to the forecasted results. The trend of the load power is then decomposed in Cartesian plane into two parts, left and right from load peak, searching for BESS capacity equal. Network switching sequence over consumption is provided by a fuzzy logic controller (FLC) with respect to BESS capacity and PV energy output. Finally, to prove the effectiveness of the proposed ANFIS-based peak shaving method, offline digital time-domain simulations have been performed on a real-life practical test micro grid system in MATLAB/Simulink environment and the results have been experimentally verified by testing on a practical micro grid system with real-life data obtained from smart meter and also, compared with several previously-reported methods.

Background: This study aims to compare the impact of early and late post-discharge cardiopulmonary rehabilitation on the outcomes of intensive care unit (ICU) survivors. Methods: The retrospective, cohort study used a sub-database of the Taiwan National Health Insurance Research Database (NHIRD) that contains information of all patients had ICU admission between 2000 and 2012. Early group was defined if patients had received cardiopulmonary rehabilitation within 30 days after ICU discharge, and late group was define as if patients had received cardiopulmonary rehabilitation between 30 days and one year after ICU discharge. The end points were mortality and re-admission during the 3-year follow-up. Results: Among 2136 patients received cardiopulmonary rehabilitation after ICU discharge, 994 was classified early group and other 1142 patients were classified as late group. Overall, early group had a lower mortality rate (6.64% vs 10.86%, p = 0.0006), and a lower ICU readmission rate (47.8% vs 57.97%, p < 0.0001) than late group after 3-year follow-up. Kaplan-Meier analysis showed that early group had significantly lower mortality (p=0.0009) and readmission rate (p<0.0001) than late group. In multivariate analysis, the risk of ICU readmission was found to be independently associated with late group (HR, 1.28; 95% CI, 1.13-1.47). Conclusions: Early post-discharge cardiopulmonary rehabilitation among ICU survivors has the long-term survival benefit and significantly decreases the readmission rate.

This study addresses an alternative use of viscous dampers (VDs) associated with buckling restrained braces (BRBs) as the innovative seismic protection devices. For this, 4, 8 and 12 storey steel frames were designed with 6.5 m equal span length and 4 m storey height. Thereafter, the VDs and BRBs were placed over the height of each frame considering three different configurations. The structures were modeled using SAP2000 finite element program and evaluated by the nonlinear time history analyses subjected to the six natural accelerograms (1976 Gazlı, 1978 Tabas, 1987 Superstition Hills, 1992 Cape Mendocino, 1994 Northridge and 1999 Chi-Chi). The structural response of the structures with and without VDs and BRBs were studied in terms of variation in the displacement, interstorey drift, absolute acceleration, maximum base shear, time history of roof displacement. The results clearly indicated that the application of VDs and BRBs had remarkable improvement in the earthquake performance of the case study frames by reducing the local/global deformations in the main structural systems and satisfied the serviceability.

Porcine circovirus type 2 (PCV2) is a small non-enveloped DNA virus that causes swine immunosuppression by inducing apoptosis in lymphocytes. The ORF3 protein plays a major role in PCV2-induced apoptosis in porcine kidney cells, but there is little information regarding this protein in PCV2-infected lymphocytes. In this study, hybridoma screening and epitope mapping were determined by using an indirect ELISA. The mAb 7D3 against ORF3 peptide (residues 35–65) of PCV2 were generated in this study. In vivo situation, the mAb 7D3 recognized ORF3 protein existed in PCV2-infected apoptotic porcine PBMCs. It is noteworthy that thimerosal interfered with the binding of mAb 7D3 to epitope and it was diminished by adding cysteine. Additionally, thimerosal interacting with cysteine-containing peptide was demonstrated by the PTI assay. Furthermore, thimerosal specifically interacted with the antigen-binding sites of mAb 7D3. This study suggested that thimerosal blockade the occlusion of the antigen-binding sites of mAb 7D3 to bind ORF3 peptide (residues 35–65) via thimerosal interacting with cysteine residues which should be located within the antigen-binding sites of mAb 7D3. Overall, the mAb 7D3 has been characterized and it will be a valuables tool in future studies of ORF3 function and the wider mechanism of cell apoptosis caused by PCV2 infection. Similarly, these techniques will be useful for applications in detecting thimerosal too.

Background: With a rapid rise in our older adult population globally and due to their multimorbidities, our older adults are more likely to engage in the services provided in the emergency department at a higher rate than younger adults. The current emergency service delivery model may be ineffective against such an ageing phenomenon. Research reports most older adults having one or more co-morbidities including functional decline, dementia, and frailty. Studies have shown that older adults have been undertriaged with physicians not being able to comprehend their complex needs related to their presenting complaints in the emergency department. Geriatric emergency departments have incepted worldwide to better manage this care deficiency in the rapidly ageing society around the world. Data Sources: A search of published literature from 2010-2020 using (keywords) as described below was undertaken of which, relevant literature were selected for an informed review. Implications for Nursing: Understanding geriatric emergencies can enable healthcare workers to reduce undertriaging and provide appropriate care that improves patient's health outcomes currently and in the future in the emergency department. Further education in gerontology can also be a platform for our nurses to enhance their care and thought process, likewise upskilling themselves for the future geriatric population seeking treatment. Older healthcare workers will also be able to enhance their current job scope before retirement. In-house teachings from trained gerontologists or certified programs can shed light on the special care needs of our senior citizens globally. Conclusion: With our rapidly increasing population, we can expect an influx of our older patients both from home and long-term care facilities to present to the emergency department with a wide range of geriatric emergencies. By being able to create a geriatric screening process and tailored care models, healthcare workers will be able to understand their care process and in turn, improve patients' health outcomes and provide a quicker transition of care.

After globalization, South Korea’s retail landscape has been saturated with large-scale, corporate type retails. However, recently new commercial districts composed of small retail units are returning and bringing about a change. This study sought to take note of this phenomenon and identify its features and meanings from the perspective of urban ecology. A density-distribution analysis was conducted to investigate how they were forms, and an analysis of traces on the Internet and an analysis on the types of businesses were done to identify sociocultural characteristics. Results showed that they had similar type of locations and growth patterns, that they harmoniously congregated in a form of smaller-individual stores, and that their use of similar names for their stores had an impact of branding their entire districts. It was also noted that a shared culture through social networking services served as a growth boost for their unfavorable location. The spontaneous formation of such commercial districts can be an outcome of an urban ecological process geared toward blank niches burgeoning in the current retail structure of Korea. The causes and conditions found in the cases reveal meaningful policy implications for cities facing the same urban crisis diversity.

Recently, due to the miniaturization of electronic products, printed circuit boards (PCBs) have also become smaller. This trend has led to the need for high-precision electrical test equipment to check PCBs for disconnections and short circuits. The purpose of this study is to improve the position repeatability of the platform unit up to ±2.5 μm in a linear stage type test equipment. For this purpose, the causes of position errors of the platform unit are analyzed. The platform unit holding the PCB is driven by a single-axis linear ball screw drive system offset from its geometric center due to design constraints. The yaw rotation of the platform is found to have a dominant effect on position repeatability. To address this problem, the methods of adding balancing weights to the platform unit and adjusting the stiffness of LM Guides are proposed. This reduces the yaw rotation by moving the centers of mass and stiffness closer to the linear ball screw actuator. In the verification tests, the position repeatability was decreased to less than ±1.0 μm.

This paper presents an extended Kalman filter derivation for loosely coupled GPS (Global Positioning System)/INS (Inertial Navigation System) integration based on quaternion attitude representation using the Earth-Centered Earth (ECEF) Frame. In this loosely coupling integration, both the position and velocity estimates from GPS receiver are used as the measurements to extended Kalman filter, and then they are integrated with inertial measurements from inertial measurement units (IMU) to estimate the attitude, position and velocity of an air vehicle. The velocity estimates which have centimeter level estimation error from the GPS receiver are used to improve the filter performance. For attitude estimation, the global attitude parameterization is given by a quaternion and a multiplicative quaternion-error approach is used to guarantee a normalization constraint of quaternion in the filter. Simulation results are shown to obtain the estimation of the attitude, position, velocity, biases and scale factors and to evaluate the performance of the EKF with the measurement combination composed of the two different t

Non-pharmacological interventions in the fight against COVID 19 include: a) suppression, which facilitates its extinction; and b) mitigation, which reduces its speed of spread. Left unmitigated, the intensive care unit bed capacity (ICU) is exceeded over its maximum supply, resulting in increased deaths. Suppression has shown in simulation models the potential for decreasing ICU occupation below its surge limit, effectively decreasing mortality. However, for avoiding a rebound in transmission, suppression must be maintained intermittently until a vaccine is available (which may take up to 2 years). The objective of this paper was to describe the mortality patterns observed in Spain, Italy and South Korea for discussing a hypothetical combined public health policy and socioeconomic model that could potentially reduce mortality while reducing the economic impact of this pandemic in Spain. The plan is based on a progressive-voluntary reinstatement to work of the population exposed to the lowest risks (healthy non-immune family units <50 y/o and immune population) and it depends on having sufficiently available ICU beds for providing adequate support. This model, if proven correct for Spain, could eventually be followed by other countries facing a similar impact of the present pandemic.

Objective: This paper aims to build an Effort Estimation Model for design, coding and testing Web Applications Based Fuzzy and Practical Models, which will help in optimizing the efforts in software development. Methods/Analysis: Soft computing approach is adopted and applied in the effort estimation and then compared with practical efforts in the development process with interpreting the historical data available for the existing functionalities. Findings: The effort estimation model presented in this paper focuses on the first level estimates published by Project Managers and the second level estimates presented by Project Leaders or Developers for any new requirement or enhancement for a web application built on 3-tier architecture using Microsoft technologies. The model considers the classification of each task as either Low or Medium or High complexity. These tasks pertain to the lowest level parts in bottom-up estimation. Efforts are estimated for designing, coding and unit testing of these tasks and the efforts are summed up to get the effort estimation for the higher level which is a feature to be implemented. Novelty/Improvement: The paper also discusses about the application of the effort estimation model by taking a new requirement as a case study. The first level estimates calculated using the effort estimation model has a variance of about 25% when compared with the actual effort. This variance is very much acceptable considering the fact that the first level estimates can be tolerable up to 35%. The proposed effort estimation tool would help the project managers to efficiently control the project, manage the resources effectively, and improve the software development process and also trade off analyses among schedule, performance, quality and functionality. Fuzzy logic is used to verify the claims made in efforts estimation. It is proposed a new relation between the number of data and efforts value membership for actual data. And converts it into crisp value in the range [0…1] which helps to classify the complexity of the task and subtask in the design, coding and testing phases.

Fire accidents are causing a huge human death as well as economic losses throughout the world every year. But a novel fire detection and extinguishing system could reduce these losses to a great extent. We are proposing a cost effective and yet very efficient system which has been developed in our laboratory and evaluated while in operation. Our system consists of two units: detection unit and extinguishing unit. For detection purposes we used smoke, IR and temperature sensors. While for extinguishing purposes we used both foam and water. We used a PC to process and control our system through LabVIEW software of National Instrument, USA. The detection unit will send signal through a wireless module to PC if fire is detected. Then PC (LabVIEW) will process the signal and using relay module first of all the electric power and gas lines will be turned off. The extinguishing unit will then release foam or water to extinguish the fire. The system will send SMS to the predefined numbers using GSM module. Our system is location independent as it uses GSM and can be operated from remote location using wireless module. After performance evaluation it was found to be fast and reliable.

The prediction of stock prices holds significant implications for researchers and investors in evaluating stock value and risk. In recent years, researchers have increasingly replaced traditional machine learning methods with deep learning approaches in this domain. However, the application of deep learning in forecasting stock prices is confronted with the challenge of overfitting. To address the issue of overfitting and enhance predictive accuracy, this study proposes a stock prediction model based on GRU (Gated Recurrent Unit) with reconstructed datasets. This model integrates data from other stocks within the same industry, thereby enriching the extracted features and mitigating the risk of overfitting. Additionally, an auxiliary module is employed to augment the volume of data through dataset reconstruction, thereby enhancing the model’s training comprehensiveness and generalization capabilities. Experimental results demonstrate a substantial improvement in prediction accuracy across various industries.

The paper considers the symmetries of a bit of information corresponding to one, two or three qubits of quantum information and identifiable as the three basic symmetries of the Standard model, U(1), SU(2), and SU(3) accordingly. They refer to “empty qubits” (or the free variable of quantum information), i.e. those in which no point is chosen (recorded). The choice of a certain point violates those symmetries. It can be represented furthermore as the choice of a privileged reference frame (e.g. that of the Big Bang), which can be described exhaustively by means of 16 numbers (4 for position, 4 for velocity, and 8 for acceleration) independently of time, but in space-time continuum, and still one, 17th number is necessary for the mass of rest of the observer in it. The same 17 numbers describing exhaustively a privileged reference frame thus granted to be “zero”, respectively a certain violation of all the three symmetries of the Standard model or the “record” in a qubit in general, can be represented as 17 elementary wave functions (or classes of wave functions) after the bijection of natural and transfinite natural (ordinal) numbers in Hilbert arithmetic and further identified as those corresponding to the 17 elementary of particles of the Standard model. Two generalizations of the relevant concepts of general relativity are introduced: (1) “discrete reference frame” to the class of all arbitrarily accelerated reference frame constituting a smooth manifold; (2) a still more general principle of relativity to the general principle of relativity, and meaning the conservation of quantum information as to all discrete reference frames as to the smooth manifold of all reference frames of general relativity. Then, the bijective transition from an accelerated reference frame to the 17 elementary wave functions of the Standard model can be interpreted by the still more general principle of relativity as the equivalent redescription of a privileged reference frame: smooth into a discrete one. The conservation of quantum information related to the generalization of the concept of reference frame can be interpreted as restoring the concept of the ether, an absolutely immovable medium and reference frame in Newtonian mechanics, to which the relative motion can be interpreted as an absolute one, or logically: the relations, as properties. The new ether is to consist of qubits (or quantum information). One can track the conceptual pathway of the “ether” from Newtonian mechanics via special relativity, via general relativity, via quantum mechanics to the theory of quantum information (or “quantum mechanics and information”). The identification of entanglement and gravity can be considered also as a ‘byproduct” implied by the transition from the smooth “ether of special and general relativity’ to the “flat” ether of quantum mechanics and information. The qubit ether is out of the “temporal screen” in general and is depicted on it as both matter and energy, both dark and visible.

We have shown that three astrometric solar-system anomalies can be explained satisfactorily by using evolutionary gravitational constant G and speed of light c in the Einstein’s field equation. These are: a) the Pioneer acceleration anomaly; b) the anomalous secular increase of Moon-orbit eccentricity; and c) the anomalous secular change in the astronomical unit AU. The gravitational constant G and the speed of light c both increase as dG/dt = 5.4GH₀ and dc/dt = 1.8cH₀ with H₀ as the Hubble constant. We also show that the Planck’s constant ħ increases as dħ/dt = 1.8ħH₀. Additionally, the new approach fits the supernovae Ia redshift vs distance modulus data as well as the standard ΛCDM model with just one adjustable parameter H₀.

The small satellite market continues to grow year after year. A compound annual growth rate of 17% is estimated during the period between 2020 and 2025. Low-cost satellites can send a vast amount of images to be post-processed at the ground to improve the quality and extract detailed information. In this domain lies the resolution enhancement task, where a low-resolution image is converted to a higher resolution automatically. Deep learning approaches to Super-Resolution (SR) reached the state-of-the-art in multiple benchmarks; however, most of them were studied in a single-frame fashion. With satellite imagery, multi-frame images can be obtained at different conditions giving the possibility to add more information per image and improve the final analysis. In this context, we developed and applied to the PROBA-V dataset of multi-frame satellite images a model that recently topped the European Space Agency’s Multi-frame Super Resolution (MFSR) competition. The model is based on proven methods that worked on 2D images tweaked to work on 3D: the Wide Activation Super Resolution (WDSR) family. We show that with a simple 3D CNN residual architecture with WDSR blocks and a frame permutation technique as data augmentation better scores can be achieved than with more complex models. Moreover, the model requires few hardware resources, both for training and evaluation, so it can be applied directly from a personal laptop.

An event occurring within a stationary environment, in the direction toward which an observer self-rotates, is perceived to precede a simultaneous event, in the direction away from which she moves. When self-rotation results from angular acceleration in the dark, perception of space is also distorted, such that the subjective straight-ahead shifts in the opposite direction to motion and temporal event promotion. A reference frameshift theory, based on the special theory of relativity, is proposed to explain these findings. Here, a hyperbolic tangent transformation of objective angular velocity constrains subjective self-rotation velocity within finite bounds, consistent with it being a limited perceptual resource. Identifying this subjective variable with vestibular nystagmus slow-phase angular velocity, the asymptotic perceived self-rotation velocity is estimated at ~200 °⁄s. When included in the Lorentz transformations of the new formalism, this value predicts experimental simultaneity distortion. Hypothetically, the hyperbolic tangent objective-to-subjective transfer function would maximize the differential entropy of the percept, and thereby also the stimulus/percept mutual information, if angular velocities of body rotation encountered in naturalistic environmental interaction have a logistic probability density distribution of scale 100 °⁄s, a proposed experimental test of the scheme.

The continuous energy transformation processes in heating, ventilation and air conditioning systems of buildings are responsible for 36% of global final energy consumption. Tighter thermal insulation requirements for buildings have significantly reduced heat transfer losses. Unfortunately, this has little effect on energy demand for ventilation. On the basis of the First and the Second Law of Thermodynamics, the concepts of entropy and exergy are applied to the analysis of ventilation air handling unit (AHU) with a heat pump in this paper. This study aims to develop a consistent approach for this purpose, taking into account the variations of reference temperature and temperatures of working fluids. An analytical investigation on entropy generation and exergy analysis are used, when exergy is determined by calculating coenthalpies and evaluating exergy flows and their directions. The results show that each component of the AHU has its individual character of generated entropy, destroyed exergy and exergy efficiency variation. However, the evaporator of heat pump and fans have unabated quantities of exergy destruction. The exergy efficiency of AHU decreases from 45-55% to 12-15% when outdoor air temperature is within the range of –30°C…+10°C, respectively. This helps to determine conditions and components of improving the exergy efficiency of the AHU at variable real-world local climate conditions. The presented methodological approach could be used in the dynamic modelling software and contribute to a wider application of the Second Law of Thermodynamics in practice.

A humidity-sensitive demand-controlled ventilation system is known for many years. It has been developed and commonly applied in regions with an oceanic climate. Some attempts were made to introduce this solution in Poland in a much severe continental climate. The article evaluates this system's performance and energy consumption applied in an 8-floor multi-unit residential building, virtual reference building described by the National Energy Conservation Agency NAPE, Poland. The simulations using the computer program CONTAM were performed for the whole hating season for Warsaw's climate. Besides passive stack ventilation that worked as a reference, two versions of humidity-sensitive demand-controlled ventilation were checked. The difference between them lies in applying the additional roof fans that convert the system to hybrid. The study confirmed that the application of demand-controlled ventilation in multi-unit residential buildings in a continental climate with warm summer (Dfb) leads to significant energy savings. However, the efforts to ensure acceptable indoor air quality require hybrid ventilation, which reduces the energy benefits. It is especially visible when primary energy use is analyzed.

(1) Background: Benefits and timing of percutaneous dilatational tracheostomy (PDT) in Intensive Care Unit (ICU) COVID-19 patients are still controversial. PDT is considered a high risk procedure for transmission of SARS CoV-2 to health care workers (HCWs). The present study analyzed optimal timing of PDT, clinical outcomes of patients undergoing PDT and safety of HCWs performing PDT. (2) Methods: 133 COVID-19 patients underwent PDT in our ICU from April 1, 2020 to March 31, 2021, 23 patients were excluded and 110 patients were enrolled. A trained medical team was dedicated to the PDT procedure. Demographic, clinical history and outcome data were collected. Patients who underwent PDT were stratified into two groups: early group, PDT ≤ 12 days from orotracheal-intubation (OTI) and late group, &gt;12 days from OTI; HCW surveillance program was performed. (3) Results: Early group included 57 patients and late group included 53 patients. Early group patients showed shorter ICU length of stay and fewer days of mechanical ventilation than the late group (p&lt;0.001). At day 7 after tracheostomy, early group patients required fewer intravenous anesthetic drugs and experienced an improvement of ventilation parameters, PaO2/FiO2-Ratio, PEEP and FiO2 (p&lt;0.001). No difference in case fatality ratio between the two groups was reported. No SARS-CoV-2 infection was reported in HCWs performing PDT. (4) Conclusions: PDT was safe and effective for COVID-19 patients, since it improved respiratory support parameters, reduced ICU length of stay and duration of mechanical ventilation, and optimized the weaning process. The procedure was safe for all HCWs involved in the dedicated medical team. The development of standardized early PDT protocols should be implemented and PDT procedure could be considered as first line approach in ICU COVID-19 requiring prolonged mechanical ventilation.

In this paper, we study singularities of the spherical indicatrix and evolute of spacelike ruled surface with spacelike ruling. Finally, we give an example to illustrate our results.

The article presents the original derivation method of transformations for kinematics with a universal reference system. This method allows to derive transformations that meet the results of the Michelson-Morley and Kennedy-Thorndike experiments only in some frame of reference, e.g. in laboratories moving in relation to a universal frame of reference with small speeds. The obtained transformations are the basis for the derivation of the new physical theory, which has been called the Special Theory of Ether. The generalized transformations can be expressed by relative speeds (26)-(27) or by the parameter δ (v) (37)-(38). Based on conclusions of the Michelson-Morley’s and Kennedy-Thorndike’s experiments, the parameter δ (v) was determined. This allows the transformations to take a special form (81)-(82), which is consistent with experiments in which velocity of light is measured. On the basis of obtained transformations, the formulas for summing speed and relative speed were also determined. The entire article includes only original research conducted by its author.

Breast cancer is a leading cause of death among women. Conventional screening methods, such as mammography, and ultrasound diagnosis are expensive and have significant limitations. Digital Image Elasto Tomography (DIET) is a new noninvasive breast cancer screening system that has a potential to be a low cost and reliable breast cancer screening tool. It is based on modal analysis of the breast mass, and stereographic 3D image analysis to detect the stiffer abnormal tissues. However, camera sensor noise, especially Gaussian noise is a major source of Optical Flow (OF) error in this approach to tumor detection. This work studies the performance of different conventional filters, including the standard Gaussian filter tool to remove this noise and produce more robust screening results. A radical approach, Multiple Frame Noise Removal (MFNR) is proposed, for use in this type of medical image processing instead of a Gaussian filter or other typical image noise removal tools. Its a multiple frame noise removal method where Probability Density Function (PDF) of noise is extracted from the multiple images by characterizing the same pixel positions in multiple images. The noise becomes deterministic, and hence easily removed. The proposed algorithm was applied to a data set from 10 phantom breast tests with a prototype DIET system, and 10 in-vivo samples from healthy women. Comparisons were made to an optimal Gaussian filter form that is commonly used. Reductions in OF error using these digitally imaged data sets was used to compare performance. Refinement of the images for medical applications requires higher PSNR, which was successfully achieved by using MFNR algorithm. In this study, the algorithm was used to improve the imaging results of a DIET system. The conventional wisdom that states that noise removal and detail preservation are contrasting effects is

Background: Parents of preterm infants face major mental health challenges in the Neonatal Intensive Care Unit (NICU). Family-centered music therapy actively integrates and empowers parents in their infant’s care. With the aim to better understand and address parental needs separately from their babies’, a music therapy (MT) self-care group was implemented as part of clinical practice at the hospital Clínica de la Mujer in Bogotá, Colombia. Methods: The group is provided for both parents twice a week in the NICU. Music guided relaxations, breathing techniques, and self-expression are at the center of the MT group sessions. Parents complete a pre/post self-administered Numeric Rating Scale (NRS) including anxiety levels, stress levels, mood and motivation. Results: Parents highly value the MT self-care group at the NICU. On average there is a 37% improvement in anxiety levels, 28% in stress levels, and 12% in mood, restfulness and motivation. Being able to relax, to distract themselves from their worries and having time for themselves are amongst the most frequently mentioned benefits. Conclusions: Addressing parents’ needs separately form their babies’ treatment with culturally sensitive interventions aimed to improve parental mental health, is essential for continuing the development of family-centered music therapy interventions in the NICU.

In an insightful article published in Nature human behavior on November 2020, the effectiveness of 46 “non-pharmaceutical interventions” (NPI) regarding Covid-19 pandemic have been compared¹. One of these 46 categories, the one which is ranked as the most effective measure, is named “small gatherings cancelation”. In the discussion section of that article, the authors introduce a list of what they probably assume to be representative examples of this category, namely, “closures of shops”, “closure of restaurants,” “mandatory home–working”, “gathering of 50 people or less” and so on. The name that the authors have given to this category could give rise to confusions and misunderstandings. We used corpus analysis to show that “small gathering” is commonly used to denote a planned or spontaneous “event”, and consequently does not convey what the authors intend this term to cover as its most representative instances i.e., Simultaneous presence of people (crowd) in shops or offices. Furthermore, taking a top-down approach, we focused on the information which was provided in reference material like CDC and WHO documents. The analysis showed that “small gatherings” is encoded in those sources to denote “events” and “small gatherings cancelation” is used to denote cancelling preplanned events. In conclusion, neither unspecialized language nor official/institutional discourse uses “small gathering” the way that the authors of the aforementioned article use it i.e., to refer to simultaneous presence of people (crowd) in shops or offices. Therefore, when language users come across this phrase, if they do not read the entire article, the only semantic frame that is evoked in their mind would be that of a festive or social “event” rather than of crowded shops or offices; this misunderstanding is cognitively justified and consequently changing this terminology is recommended.

Survivors of severe brain injury may require care in a neurointensive care unit (neuro-ICU), where the brain is vulnerable to secondary brain injury. Thus, there is a need for noninvasive, bedside, continuous cerebral blood flow monitoring approaches in the neuro-ICU. Our goal is to address this need through combined measurements of EEG and functional optical spectroscopy (EEG-Optical) instrumentation and analysis to provide a complementary fusion of data about brain activity and function. The present case demonstrates in a patient with traumatic brain injury, noninvasive cerebral blood flow transients can be recorded that correlate with gold-standard invasive measurements and with the frequency content changes in the EEG data during clinical care.

The optimization problem of two or more special-purpose functions of the energy system is subjected to an analysis. Based on experience of our research and general knowledge of partial solutions of energy system optimization at the level of control of production and power energy supply by energy companies in the Czech Republic, a special-purpose (cost) function has been defined. By analysing the special-purpose function, penalty and limitations have been defined. Using the fuzzy logic, a set of suitable solutions for the special-purpose function is accepted. An optimum of the special-purpose function is looked for using the simulated annealing method. The history of electricity consumption is sorted by day and by hour, representing the multidimensional data. When using the cluster analysis, type daytime diagrams of consumption are defined. Type daytime diagrams form prototypes of identified clusters. The so-called self-organizing neural network with Kohonen map attached is used to perform the cluster analysis. The result of our research is presented by an experiment.

The paper aims to illustrate the different roles that social sciences can play in the study of the energy transition. To this end, a scheme is developed that frames the relative position of the social sciences with respect to other disciplines (metaframe). Secondly, socialization is identified as a charismatic category capable of providing an original, typically sociological contribution to the complex and hesitant energy transition (masterframe)

Detailed mapping and structural observations on the Cycladic Blueschist Unit (CBU) of Iraklia island integrated by detrital zircon (DZ) U-Pb ages elucidate the Mesozoic pre-subduction evolution and the Cenozoic orogenic events. Field data reveal that the Iraklia tectonostratigraphy includes a heterogeneous Lower Schist Unit juxtaposed against a Variegated Marble Unit and an overlying Upper Schist Unit. The contact is an extensional ductile-to-brittle-ductile, top-to-N shear zone, associated with the Oligo-Miocene exhumation. The DZ spectrum of the Lower Schist Unit characterized by Gondwanan/peri-Gondwanan provenance signatures points to Late Triassic maximum depositional ages (MDAs). A quartz-rich schist layer yielded Precambrian DZ ages exclusively, considered part of the pre-Variscan metasedimentary Cycladic Basement, equivalent to those observed on Ios island. A significant change occurred during the deposition of the Upper Schist Unit, revealing Late Cretaceous MDAs and a high amount of Late Paleozoic DZ ages, attesting to more internal Pelagonian source areas. The imprint of Paleotethyan vs. Neotethyan geodynamic events is revealed in the DZ U-Pb ages record. The Triassic DZ input demonstrates eroded volcanic material related to the final Paleotethys closure and the Pindos/CBU rift basin opening. Late Cretaceous metamorphic/magmatic zircons and ~48-56 Ma zircon rims constrain the onset of subduction and high-pressure metamorphism.

Understanding the shoulder-specific load in handball is important for both prevention and rehabilitation of shoulder injuries. The shoulder-specific load is largely a result of the number and speed of throws. However, it is difficult to quantify number and speed of throws in handball due to limitations in the current technology. Therefore, the purpose of this study was to develop a novel method to estimate throwing speed in handball using a low-cost accelerometer-based device. Nineteen experienced handball players each performed 25 throws of varying types while we measured the acceleration of the wrist using the accelerometer and the throwing speed using 3D motion capture. Using cross-validation, we developed four prediction models using combinations of the logarithm of the peak total acceleration, sex and throwing type as the predictor and the throwing speed as the outcome. We found that all models were well-calibrated (mean calibration of all models: 0.0 m/s, calibration slope range: 0.99-1.00) and precise (R2 = 0.71-0.85, mean absolute error = 1.32-1.82 m/s). We conclude that the developed method appear to provide practitioners and researchers with a feasible and cheap method to estimate throwing speeds in handball.

Intensive care unit discharge is an important transition which impacts on patient wellbeing. Nurses can play an essential role in this scenario, potentiating patient empowerment. A systematic review was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses: the PRISMA Statement. Embase, PubMed/MEDLINE, CINAHL, and Cochrane Central Register of Controlled Trials (CENTRAL) databases were evaluated in May 2021. Two independent reviewers analyzed the studies, extracted the data, and assessed the quality of evidence. Quality of the studies included was assessed using the Cochrane risk-of-bias tool. Of the 273 articles initially identified, eight randomized controlled trials reported nursing interventions mainly focused on patients’ ICU discharge preparation through information and education. The creation of ICU Nurse-Led and nurses’ involvement in critical care multidisciplinary teams also aimed to support patients during ICU discharge. This systematic review provides an update on clinical practice aimed at improving the patient experience during ICU discharge. The main nursing interventions were based on information and education, as well as the development of new nursing roles. Understanding transitional needs and patient empowerment are key to making the transition easier.

Given that population COVID-19 vaccination does not appreciably reduce SARS-CoV-2 transmission, instead, the potential to reduce hospitalization has been used to justify coercive vaccine passports. We aim to use a recently published research study as an example in order to demonstrate how data can be misinterpreted and result in deriving misleading ethical and policy implications. Bagshaw et al wrote that unvaccinated patients with COVID-19 in Alberta, Canada “had substantially greater rates of ICU admissions, ICU bed days, and ICU related costs than vaccinated patients did. This increased resource use would have been potentially avoidable had these unvaccinated patients been vaccinated.” The authors in Bagshaw et al then concluded that their findings “have important implications for discourse on the relative balance of increasingly stringent public health protection (restrictions), including mandatory vaccination policies, and the sustainability and function of health system infrastructure and capacity during the ongoing COVID-19 pandemic.” Here we show the following. First, the effect of vaccination on intensive care admissions were grossly over-estimated due to several limitations of this and almost all other vaccine studies. Second, an effect of vaccination on access to acute care and on all-cause excess deaths was grossly over-stated due to several more likely causes being omitted from discussion and from the common narrative. Third, policy implications were overstated and at best unclear due to missing consideration of more relevant aspects required to inform policy. Overall, the data cannot support what Bagshaw et al called “increasingly stringent public health protection (restrictions), including mandatory vaccination policies”.

In this Case Report we analyze the possible causes of the poor health status of a professional Apis mellifera iberiensis apiary located in Gajanejos (Guadalajara, Spain). Several factors that potentially favor colony collapse were identified, including Nosema ceranae infection, alone or in combination with other factors (eg, BQCV and DWV infection), and the accumulation of acaricides commonly used to control Varroa destructor in the beebread (coumaphos and tau-fluvalinate). Based on the levels of residues, the average toxic unit estimated for the apiary, suggests a possible increase in vulnerability to infection by N. ceranae due to the presence of high levels of acaricides. These data highlight the importance of evaluating these factors in future monitoring programs, as well as the need to adopt adequate preventive measures as part of national and international welfare programs aimed at guaranteeing the health and fitness of bees.

The informational re-interpretation of the basic laws of the mechanics exploiting the Landauer principle is suggested. When a physical body is in rest or it moves rectilinearly with the constant speed, zero information is transferred; thus, the informational affinity of the rest state and the rectilinear motion with a constant speed is established. The analysis of the minimal Szilard thermal engine as seen from the non-inertial frame of references is carried out. The Szilard single-particle minimal thermal engine undergoes the isobaric expansion relatively to the accelerated frame of references, enabling the erasure of 1 bit of information. The energy ΔQ spent by the inertial force for the erasure of 1 bit of information is estimated as: ΔQ≅5/3 k_B T ̅, which is larger than the Landauer bound but qualitatively close to it. The informational interpretation of the equivalence principle is proposed: the informational content of the inertial and gravitational masses is the same.

The study on graphs emerging from different algebraic structures like groups, rings, fields, vector spaces, etc. is a prominent area of research in mathematics, as algebra and graph theory are two mathematical fields that focuses on creating and analysing structures. There are numerous studies linking algebraic structures and graphs, which began with the introduction of Cayley graphs of groups. Several algebraic graphs have been defined on rings, which have huge-growing literature. In this article, we systematically review the literature on some variants of Cayley graphs that are defined on rings, to understand the research in this area.

Automated spectrum analysis serves as a troubleshooting tool that helps to diagnose faults in wireless networks like difficult signal propagation conditions and coexisting wireless networks. It provides a higher monitoring coverage while requiring less expertise compared to manual spectrum analysis. In this paper, we introduce a data set that can be used to train and evaluate deep learning models, capable of detecting frames from different wireless standards as well as interference between single frames. Since manually labelling a high variety of frames in different environments is too challenging, an artificial data generation pipeline has been developed. The data set consists of 20 000 augmented signal segments, each containing a random number of different Wi-Fi and Bluetooth frames, their spectral image representations and labels that describe the position and type of frame within the spectrogram. The data set contains results of intermediate processing steps that enables the research or teaching community to create new data sets for specific requirements or to provide new interesting examination examples.

: There remains no acquiescence that confirms the extent to which unemployment and entrepreneurship influence each other in developing countries. Thus, an incessant invite for further debate attracted the need to assess the relationship between unemployment and entrepreneurship in terms of business formation in Namibia Given that, this study examines the relationship between unemployment and entrepreneurial activities in Namibia. Time series data were collected from the World Bank database to investigate the relationship between unemployment and entrepreneurship in Namibia. Unit root test was conducted using both the Augmented Dickey-Fuller test and the Phillips-Perron test to measure stationarity of the data and found all the variables to have no unit root after the first difference. Thus, we employed the Johansen-Juselius test of cointegration, and the results revealed the absence of a long-run relationship between the variables. Hence, we performed a vector autoregressive (VAR) model to estimate the short-run relationships and found that Namibia exhibit both the refugee and Schumpeter effects. Finally, the direction of causality between the variables was measured using the Pairwise Granger causality test and the results revealed that none of the variables was proven to granger cause the other, concluding that they are all independent of each other. Therefore, in pursuit of unemployment mitigation, we recommend policymakers to focus on other aspects beyond entrepreneurship when devising policies without jeopardizing the ease of business start-up procedures. This will incentivize entrepreneurial activities, which can eventually address other macroeconomic issues beyond unemployment.

Human motion analysis using inertial measurement units (IMUs) has recently been shown to provide accuracy similar to the gold standard, marker-based optical motion capture, but at much lower costs and while being less restrictive and time-consuming. However, IMU-based motion analysis requires precise knowledge of the orientation in which the sensor is attached to the body segments. This knowledge is commonly obtained via an anatomical calibration procedure based on precisely defined poses or motions, which is time-consuming and error-prone. In the present work, we propose a self-calibrating approach for magnetometer-free joint angle tracking that is suitable for joints with two degrees of freedom (DoF), such as the elbow, ankle, and metacarpophalangeal finger joints. The proposed methods exploit kinematic constraints to simultaneously identify the joint axes and the heading offset. The experimental evaluation shows that the proposed methods are able to estimate plausible and consistent joint axes from just ten seconds of arbitrary elbow joint motion. Comparison with optical motion capture shows that the proposed methods yield joint angles with similar accuracy as a conventional IMU-based method while being much less restrictive. Therefore, the proposed methods improve the practical usability of IMU-based motion tracking in many clinical and biomedical applications.

Event-based vision is an emerging field of computer vision that offers unique properties such as asynchronous visual output, high temporal resolutions, and dependence on brightness changes to generate data. These properties can enable robust high-temporal-resolution object detection and tracking when combined with frame-based vision. In this paper, we present a hybrid, high-temporal-resolution, object detection and tracking approach, that combines learned and classical methods using synchronized images and event data. Off-the-shelf frame-based object detectors are used for initial object detection and classification. Then, event masks, generated per each detection, are used to enable inter-frame tracking at varying temporal resolutions using the event data. Detections are associated across time using a simple low-cost association metric. Moreover, we collect and label a traffic dataset using the hybrid sensor DAVIS 240c. This dataset is utilized for quantitative evaluation using state-of-the-art detection and tracking metrics. We provide ground truth bounding boxes and object IDs for each vehicle annotation. Further, we generate high-temporal-resolution ground truth data to analyze the tracking performance at different temporal rates. Our approach shows promising results with minimal performance deterioration at higher temporal resolutions (48 – 384 Hz) when compared with the baseline frame-based performance at 24 Hz.

Background Although aminoglycosides are often used as treatment for Gram-Negative infections, optimal dosing regimens remains unclear, especially in ICU patients. This is due to a large between- and within-subject variability in the aminoglycosides’ pharmacokinetics in this population. Objective The review provides comprehensive data on the pharmacokinetics of aminoglycosides in patients hospitalized in ICU by summarizing all published PopPK models in ICU patients for amikacin, gentamicin, and tobramycin. The objective was to determine the presence of a consensus on the structural model used, significant covariates included, and therapeutic targets considered during dosing regimen simulations. Methods A literature search was conducted from the Medline/PubMed database, using the terms: ‘amikacin’, ’gentamicin’, ’tobramycin’, ‘pharmacokinetic(s)’, nonlinear mixed effect’, population’, ‘intensive care’ and ‘critically ill’. Results Nineteen articles were retained where amikacin, gentamicin and tobramycin pharmacokinetics were described in six, eleven and five models, respectively. Two-compartment model best described amikacin and tobramycin pharmacokinetics, whereas one-compartment model majorly described gentamicin pharmacokinetics. The most recurrent significant covariates were renal clearance and bodyweight. Across all aminoglycosides, mean interindividual variability in clearance and volume of distribution were 41.6% and 22.0%, respectively. A common consensus for an optimal dosing regimen for each aminoglycoside was not reached. Conclusion This review showed models developed for amikacin, from 2015 until now and for gentamicin and tobramycin from the past decades. Despite growing challenges of external evaluation, the latter should be more considered during model development. Further research including new covariates, additional simulated dosing regimens and external validation should be considered to better understand aminoglycosides pharmacokinetics in ICU patients.

Freezing of gait (FOG), a debilitating symptom of Parkinson’s disease (PD), can be safely studied using the stepping in place (SIP) task. However, clinical, visual identification of FOG during SIP is subjective and time consuming, and automatic FOG detection during SIP currently requires measuring center of pressure on dual force plates. This study examines whether FOG elicited during SIP in 10 individuals with PD could be reliably detected using kinematic data measured from wearable inertial measurement unit sensors (IMUs). A general, logistic regression model (AUC = 0.81) determined that three gait parameters together were overall the most robust predictors of FOG during SIP: arrhythmicity, swing time coefficient of variation, and swing angular range. Participant-specific models revealed varying sets of gait parameters that best predicted FOG for each participant, highlighting variable FOG behaviors, and demonstrated equal or better performance for 6 out of the 10 participants, suggesting the opportunity for model personalization. The results of this study demonstrated that gait parameters measured from wearable IMUs reliably detected FOG during SIP, and the general and participant-specific gait parameters allude to variable FOG behaviors that could inform more personalized approaches for treatment of FOG and gait impairment in PD.

Achieving devices to be transparent is the task considered in the last time in many aspects and for different purposes. One issue of these problems is making anti-reflective surfaces in a wide wavelength range and keeping it flat enough. The authors of the previous publication showed that one could enhance a flat facet's transmission efficiency by suitable engraving. They used smoothed conical fingers and holes. Here, we widen the class of anti-reflective metasurfaces under consideration, following the requirements of the model developed in the previous paper. We involve also smoothed pyramidal fingers. The obtained results provide the improved engraved structure, with parameters dependent on the required spectral range, and the facet format. The predicted level of transmittance is close to 99\%, and the flatness(estimated by the standard deviation) as 0.2\%. This improvement is significant enough for high and broadband transmittance. In this work, we show that the randomization of the engraving parameters does not provide any significant effect for small facets. We also discuss a simple way of comparing experimental and theoretical results for a waveguide with the considered input and output features. In this study, as well as in our previous work, we restrict ourselves by rectangular facets. We also discuss the limitations that originated from the size and shape of the waveguide facets.

Background: To compare the loss of preload in absence of loading and after a fixed number of ideal masticatory cycles in two different connection systems using all-on-four prosthetic model. Methods: Two equal models of an edentulous mandible rehabilitated with all-on-four technique with two types of abutment system (MUA and OT-Bridge) supporting a hybrid prosthesis, were used. Initial torque values of the prosthetic fixing screw, after ten minutes from initial screw tightening and after 400000 masticatory cycles were registered using a mechanical torque gauge. Differences between initial and final torque values were reported for each anchoring system and the two systems were finally compared. Results: No statistically significant differences regarding the loss of preload between MUA and OT-Bridge system were found after 400000 masticatory cycles; however, in MUA system it was found between anterior and posterior implant screws. A significant difference in preload loss was found only for MUA system comparing the initial screw torque to that measured after 10 minutes from the tightening in absence of cyclic loadings. Conclusions: MUA and OT-Bridge are reliable prosthetic anchoring systems able to tolerate repeated masticatory cycles also on distal cantilever in all-on-four rehabilitation model without any significant loss of preload in screw tightening

Highly-resolved data on water balance components (like runoff or storage) are crucial to improve water management, e.g., in drought or flood situations. Because regional observations of these components cannot be acquired adequately, applying water balance models is a feasible solution. We developed an innovative approach using the physically-based lumped-parameter water balance model BROOK90 (R version) integrated into a sensor network platform to derive daily water budget components for catchments in the Free State of Saxony. The model is not calibrated but rather uses available information on soil, land use and precipitation only. We applied the hydro response units (HRUs) approach for 6175 small and medium-sized catchments. For the evaluation, model output was cross-evaluated in ten selected head catchments in a low mountain range in Saxony. The mean values of Kling-Gupta efficiency (KGE) for the period 2005-2019 to these catchments are 0.63 and 0.75 for daily and monthly discharge simulations, respectively. The simulated evapotranspiration and soil wetness are in good agreement with the SMAP_L4_GPH product in April 2015-2018. The study can be enhanced by using different data platforms as well as available information on study sites.

We consider the Dirac electron as a nonperturbative particle-like solution consistent with its own Kerr-Newman (KN) gravitational and electromagnetic field. We develop the earlier models of the KN electron regularized by Israel and López, and consider the non-perturbative electron model as a bag model formed by Higgs mechanism of symmetry breaking. The López regularization determines the unique shape of the electron in the form of a thin disk with a Compton radius reduced by 4π. In our model this disk is coupled with a closed circular string which is placed on the border of the disk and creates the caused by gravitation frame-dragging string tension produced by the vector potential of the Wilson loop. Using remarkable features of the Kerr-Schild coordinate system, which linearizes the Dirac equation, we obtain solutions of the Dirac equation consistent with the KN gravitational and electromagnetic field, and show that this solution takes the form of a massless relativistic string. Parallelism of this model with quantum representations in Heisenberg and Schrodinger pictures explains remarkable properties of the stringy electron model in the relativistic scattering processes.

: In the last years, materializations of neuromorphic circuits based on nanophotonic arrangements have been proposed, which contain complete optical circuits, laser, photodetectors, photonic crystals, optical fibers, flat waveguides, and other passive optical elements of nanostructured materials, which eliminate the time of simultaneous processing of big groups of data, taking advantage of the quantum perspective and thus highly increasing the potentials of contemporary intelligent computational systems. This article is an effort to record and study the research that has been conducted concerning the methods of development and materialization of neuromorphic circuits of Neural Networks of nanophotonic arrangements. In particular, an investigative study of the methods of developing nanophotonic neuromorphic processors, their originality in neuronic architectural structure, their training methods and their optimization has been realized along with the study of special issues such as optical activation functions and cost functions.

In the literature, frames generated by unitary representations of groups (known as group-frames) are studied only for Hilbert spaces. We make first study of frames for Banach spaces generated by isometric invertible representations of discrete groups on Banach spaces. These frames are characterized using left regular, right regular, Gram-matrices and group-matrices on classical sequence spaces. A sufficiently large collection of functional-vector pairs using the double commutant of the representation is identified which generate group-frames for Banach spaces. Subsequently, we study Schauder frames generated by time-frequency shift operators on finite dimensional Banach spaces. We derive Moyal formula, fundamental identity of Gabor analysis, Wexler-Raz criterion and Ron-Shen duality in functional form.

Characterized in biomedical terms, stretching exercises have been defined as movements applied by external and/or internal forces – to increase muscle and joint flexibility, decrease muscle stiffness, to elevate joint range of motion (ROM), to increase the length of the morpho-functional unit “muscle-tendon”, to improve joint, muscle and tendon movements, contraction and relaxa-tion. The present review examines and summarizes the initial and recent literature data related to the biomechanical, physiological and therapeutic effects of static stretching (SS) on flexibility and other physiological characteristics of the main structural and functional unit “joint-ligaments-tendon-muscle”. The healing and therapeutic effects of SS, soon combined with other rehabilitation techniques (massage, foam rolling – with and without vibrations; hot/cold therapy, etc.) are discussed in relationship to creation of individual (patient-specific) or group programs for treatment and prevention of joint injuries as well as for improving performance in sports. From a theoretical point of view, the role of SS as positively affecting the composition of the connective tissue matrix is pointed out: type I-III collagen synthesis, hyaluronic acid and glucosaminoglycans (GAGs) turnover – under influence of the transforming growth factor beta-1 (TGF-β-1). Different variables as collagen type, biochemistry, elongation and elasticity are used as molecular biomarkers. Recent studies evaluated that the static progressive stretching therapy could prevent/reduce the development of arthrogenic contractures, joint capsule fibrosis, muscle stiffness and need new clinical applications. Combined stretch techniques are proposed and ap-plied in medicine and sports, depending on their long- and short-term effects on variables such as ROM, EMG activity, muscle stiffness, etc. The results obtained are of theoretical and practical interest for development of new experimental, mathematical and computational models and creation of efficient therapeutic programs. The healing SS effects on the main structural and functional unit – “joint-ligament-tendon-muscle” need further investigations, which could clarify and evaluate benefits of SS in prophylaxis and treatment of joint injuries - in healthy and ill in-dividuals, in older adults, as compared to young, active and well-trained persons, as well as to professional athletes.

In recent years, neural networks based on attention mechanisms have been increasingly widely used in speech recognition, separation, enhancement, and other fields. In particular, the convolution-augmented transformer has achieved good performance as it can combine the advantages of convolution and self-attention. Recently, the gated attention unit (GAU) has been proposed. Compared with the traditional multi-head self-attention, approaches with GAU are effective and computationally efficient. In this article, we propose a network for speech enhancement called CGA-MGAN, a kind of Metric GAN based on convolution-augmented gated attention. CGA-MGAN captures local and global correlations in speech signals at the same time through the fusion of convolution and gated attention units. Experiments on Voice Bank + DEMAND show that the CGA-MGAN we propose achieves an excellent performance (3.47 PESQ, 0.96 STOI, and 11.09dB SSNR) at a relatively small model size (1.14M).

Quantum-dot cellular automata (QCA) are a promising nanoscale computing technology that exploits the quantum mechanical tunneling of electrons between quantum dots in a cell and electrostatic interaction between dots, in neighboring cells. QCA can achieve higher speed, lower power, and smaller areas than conventional complementary metal–oxide–semiconductor (CMOS) technology. Developing QCA circuits in a logically and physically reversible manner can provide exceptional reductions in energy dissipation. The main challenge of reversible QCA design is to maintain reversibility down to the physical level. The arithmetic logic unit (ALU) is an essential component of the central processing unit (CPU) of a computer. It performs various arithmetic and logical operations on the data that the CPU processes. Current QCA ALU designs are either irreversible or logically reversible; however, they lack physical reversibility, a crucial requirement to increase energy efficiency. In this paper, we present a novel multilayer design for a logically and physically reversible QCA ALU based on majority gates as the key components, which can perform 16 different operations. We use QCADesigner-E software to simulate and evaluate energy dissipation. The proposed logically and physically reversible QCA ALU offers an improvement of 88.8% in energy efficiency. Compared to the next most efficient 16-operation QCA ALU, this ALU uses 51% fewer QCA cells and 47% less area.

The different waves of the COVID-19 pandemic caused dramatic issues regarding the organiza-tion of care. In this context innovative solutions have to be developed in a timely manner to adapted the organization of the care. The establishment of middle care (MC) units is a bright example of such an adaptation. A multidisciplinary MC team, including expert and non-expert respiratory nurses, physicians, physiotherapists, psychologists, nutritionists and social workers, was built and trained to work in the COVID-19 MC unit. Important educational resources were set up to ensure rapid and effective training of the MC team, limiting the admission or delaying transfers to ICU and ensuring optimal management of palliative care. We conducted a retrospec-tive analysis of patient data in the MC unit during the second COVID-19 wave. Fifty-two COVID-19 ‘step-up’ patients admitted to the MC unit were included in the study. Thirty-four (65%) patients worsened, of which 12 (23%) were not eligible for ICU access. In total, 42% of the ICU-eligible patients were managed in the MC unit to avoid the ICU. Among the 22 patients transferred to the ICU, 15 were intubated. The establishment of an MC unit during a pandemic, mixing expert and non-expert respiratory team members, is feasible and needed. MC units possi-bly relieve the pressure exerted on ICUs. A highly trained multidisciplinary team is key to ensur-ing the success of an MC unit during a pandemic.

Abstract: Background: Stigma in health can result in a broad range of vulnerabilities and risk for patients and healthcare providers. The media plays a role in people’s understanding of health and stigma is socially constructed through many communication channels including via media framing. Among health issues that were affected by stigma recently were the Monkeypox and Covid-19. Objectives: This research aims to examine how The Washington Post framed stigma around mon-keypox and COVID-19. Guided by the framing theory and stigma theory, online news coverage for monkeypox and COVID-19 were analyzed to understand the construction of social stigma through the media reporting. Methods: This research employed a qualitative content analysis to compare news framing in The Washington Post online news regarding monkeypox and COVID-19. Results: Based on endemic, reassurance, and sexual transmission frames, the The Washington Post predominantly defined Africa as the source of the disease, blames gay communities, and empha-sizes no need to worry about the spread of the monkeypox virus. For the COVID-19 coverage, The Washington Post described China as the source of the coronavirus and constructs the image of panic towards the spread of the virus. Conclusions: The shifts in stigma discourse essentially manifest racism, xenophobia, and sexism in public health. This research affirms that the media reinforces stigma phenomenon in health through framing and offers constructive suggestions for mitigating this issue.

Background: global longitudinal strain (GLS) measures myocardial deformation and is a sensitive modality for detecting subclinical myocardial dysfunction and predicting cardiac outcomes. The accuracy of speckle-tracking echocardiography (STE) is dependent on temporal resolution. A novel software enables relatively high frame rate (Hi-FR) (~200 fps) echocardiographic images acquisition which empowers us to investigate the impact of Hi-FR imaging on GLS analysis. The goal of this pilot study was to demonstrate the feasibility of Hi-FR for STE. Methods: In this prospective study, we acquired echocardiographic images using clinical scanners on patients with normal left ventricular systolic function using Hi-FR and conventional frame rate (Reg-FR) (~50 FPS). GLS values were evaluated on apical 4-, 2- and 3-chamber images acquired in both Hi-FR and Reg-FR. Inter-observer and intra-observer variabilities were assessed in Hi-FR and Reg-FR. Results: There were 143 resting echocardiograms with normal LVEF included in this study. The frame rate of Hi-FR was 190 ± 25 and Reg-FR was 50 ± 3, and the heart rate was 71 ± 13. Strain values measured in Hi-FR were significantly higher than those measured in Reg-FR (all p < 0.001). Inter-observer and intra-observer correlations were strong in both Hi-FR and Reg-FR. Conclusions: We demonstrated that strain values were significantly higher using Hi-FR when compared with Reg-FR in patients with normal LVEF. It is plausible that higher temporal resolution enabled the measurement of myocardial strain at desired time point. The result of this study may inform clinical adoption of the novel technology. Further investigations are necessary to evaluate the value of Hi-FR to assess myocardial strain in stress echocardiography in the setting of tachycardia.

Biogeography research is flawed by the poor understanding of microbial distributions due to the lack of a systematic research framework, especially regarding appropriate study units. By combining pure culture and molecular methods, we studied the biogeographic patterns of nematode-trapping fungi by collecting and analysing 2,250 specimens from 228 sites in Yunnan Province, China. We found typical watershed patterns at the species and genetic levels of nematode-trapping fungi. The results showed that microbial biogeography could be better understood by 1) using watersheds as research units, 2) removing the coverup of widespread species, and 3) applying good sampling efforts and strategies. We suggest that watersheds could help unify the understanding of the biogeographic patterns of animals, plants, and microbes and may also help account for the historical and contemporary factors driving species distributions.

The sustainability of the planet and its inhabitants is in dire danger and is among the highest priorities on global agendas such as the Sustainable Development Goals (SDGs) of the United Nations (UN). Solar energy -- among other clean, renewable, and sustainable energies -- is seen as essential for environmental, social, and economic sustainability. Predicting solar energy accurately is critical to increasing reliability and stability, and reducing the risks and costs of the energy systems and markets. Researchers have come a long way in developing cutting-edge solar energy forecasting methods. However, these methods are far from optimal in terms of their accuracies, generalizability, benchmarking, and other requirements. Particularly, no single method performs well across all climates and weathers due to the large variations in meteorological data. This paper proposes SENERGY (an acronym for Sustainable Energy), a novel deep learning-based auto-selective approach and tool that, instead of generalising a specific model for all climates, predicts the best performing deep learning model for GHI forecasting in terms of forecasting error. The approach is based on carefully devised deep learning methods and feature sets through an extensive analysis of deep learning forecasting and classification methods using ten meteorological datasets from three continents. We analyse the tool in great detail through a range of metrics and methods for performance analysis, visualization, and comparison of solar forecasting methods. SENERGY outperforms existing methods in all performance metrics including Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), Forecast Skills (FS), Relative Forecasting Error, and the normalised versions of these metrics. The proposed auto-selective approach can be extended to other research problems such as wind energy forecasting and predict forecasting models based on different criteria (in addition to the minimum forecasting error used in this paper) such as the energy required or speed of model execution, different input features, different optimisations of the same models, or other user preferences.

The apparent shape of the black hole shadow provides a full description of the spin, the inclination angle and the charge of a Kerr black hole, without any astrophysical process or underlying theory in the astrophysical process.

Sensors and actuators are fundamental units in Cyber-Physical and Internet of Things systems. Because they are included in a variety of systems, using many technologies, it is very useful to characterize their functions abstractly by describing them as Abstract Entity Patterns (AEPs), that are patterns that describe abstract conceptual entities. For concreteness, we study them here in the context of autonomous cars. An autonomous car is a complex system because, in ad-dition to its own complex design, it interacts with other vehicles and with the surrounding in-frastructure. To handle these functions, it must incorporate various technologies from different sources. An autonomous car is an example of a Cyber-Physical System, where some of its func-tions are performed by Internet of Things units. Sensors are extensively used in autonomous cars to measure physical quantities; actuators are commanded by controllers to perform appro-priate physical actions. From AEPs we can derive concrete patterns, a structure combining re-lated AEPs is an Entity Solution Frame (ESF). Both sensors and actuators are susceptible to mali-cious attacks due to the large attack surface of the system where they are used. Our work is in-tended to make autonomous cars more secure, which also increases their safety. Our final objec-tive is to build a Security Solution Frame for sensors and actuators of autonomous cars that will facilitate their secure design. A Security Solution Frame is a solution structure that groups to-gether and organizes related security patterns. This article is the first stage of a secure unit that can be used to design not only secure autonomous cars but also any system where sensors and actuators are used. This paper concentrates on AEPs and ESFs for sensors and actuators; that is, on the functional aspects of these devices.

Distracted driving is the leading cause of accidents, the cause of these distractions may include drowsiness, using cell phone, smoking a cigarette, etc. The proposed paper aims at monitoring the attentiveness of the driver and alerting the driver when his/her alertness goes below a certain threshold. It uses image processing using OpenCV (Computer Vision) and You Look Only Once (YOLO) algorithm to detect the eyes and object respectively and sounds an alarm when the driver is either drowsy or using his cell phone or smoking a cigarette.

The frame construction of an apartment complex that consists of multiple buildings encounters various uncertainties, owing to the complex relationships among units of work. Currently, the period of such a construction is calculated based on the number of floors of the highest building in the complex. This study quantitatively analyzes an apartment frame construction period using a queue model and evaluates the validity of the estimated period. In this regard, a methodology is proposed for analyzing the construction period by applying the concept of a customer and a server. A case study on the duration of an apartment frame construction is conducted with Korea Land and Housing Corporation, which has supplied the largest number of apartments in South Korea. It was found that the stable state of a queue system was observed when the rate of server utilization was applied to the basement and aboveground floors. However, a stable state was not reached on the ground floor. This study includes non-working days in its calculation and quantitatively analyzes uncertainty factors during construction. Therefore, the findings can be practically utilized to quantitatively plan the durations of work units in an apartment frame construction.

The article deals with the current state of energy consumption and CO2 emissions in the urban area of building clusters. There are many requirements, such as those set by the EU (FIT 55, decarbonisation in 2050, full electromobility in 2035, or mandatory annual reductions in energy consumption and CO2 production) or societal requirements, such as stable energy supply and its optimisation while significantly reducing CO2 emissions. This inspired us to design an energy model of a building (EMB) with smart grid implementation in a decentralized sustainable energy system. Simulation model studies were carried out to show the possibility of their application in the process of fully satisfying energy needs in terms of reducing their environmental impact. A decentralized photovoltaic system (microgrid) connected to a distribution grid. The main objective is to propose an original methodology for the design of smart "Nearly Zero Energy Buildings" (NZEB) and a subsequent solution for energy sustainability. This has led us to use HOMER, PV*SOL, Monte Carlo and DesignBuilder software which were chosen from the range of options that were and are available. Subsequently, a synthesis of the selected software solutions was carried out and a new model - the "Energy Model of a Building" (EMB) - was proposed in the process of integration with the energy performance of buildings, as an original optimization basis for designing smart buildings and smart areas, and even cities. The proposed EMB has been verified and evaluated within the experiment.

The annual demand for fibres continues to rise worldwide. Consequently, more and more fibres must be produced to meet this demand, most of which are melt-spun polymeric man-made fibres. [1] Smooth filaments made of polymers are mainly used for technical applications in industry. For use in clothing or home textiles, for example, a texturing process is used to give the filaments a crimp and thus a feel like that of natural fibres. In this state, they can be processed together with natural fibres and used in textiles. Partially oriented yarns (POY) are of great importance in tex-turing. The yarns are mainly crimped with the help of the so-called false-twist texturing process (FTTP). [2] Since POY accounts for about 60 % of the melt-spun filament yarn produced world-wide, the FTTP is the most important texturing process in the textile industry [3]. In this paper, the main components of false-twist texturing (FTT) machines are explained along with the state of the art and research for each component and its influence on the process. Relevant patents are dis-cussed as well as process optimisation techniques, innovative polymers and yarn types recently used in FTT, followed by a conclusion and an outlook for the process.