This paper presents a theory on graph topological structure and graph coloring, proving that for any N-order graph structure (with a topological structure similar to ), the maximum number of colors required for coloring is less than or equal to . The Four Color Theorem is just one special case of this theory, with the maximum structure size for a four-color graph being a 4-order structure graph, hence requiring only a maximum of 4 colors for coloring.

The aim was to evaluate the effect of different whitening toothpastes on the enamel surface roughness and color variation. Twenty-four molars were sectioned and divided into eight groups (n = 3), considering the two factors under study: toothpaste type (Colgate® Total Original, Oral B® 3D White Luxe Perfection, Curaprox® Black is White, and Signal® White Now) and brushing protocol (short-term and a long-term). Surface roughness was examined by atomic force microscopy (AFM), and color change (ΔE) was measured using the CIE L*a*b* system. Data were statistically analyzed using comparative parametric tests at a 5% significance level. In the short-term protocol, only the Signal® White Now toothpaste increased surface roughness (p = 0.038) compared to the Colgate® Total Original group. No significant differences (p > 0.05) were observed in surface roughness in the long-term protocol. Regarding color variation, no statistically significant differences (p > 0.05) were observed in either protocol. Overall, the whitening toothpastes did not affect enamel surface roughness or color, except for Signal® White Now causing increased roughness in the short-term protocol. However, all toothpastes induced a visual change in color.

This study investigates the effects of ambient illumination and negatively polarized text color on visual fatigue, exploring the issue of visual fatigue when using visual display terminals in low-illumination environments. The research methodology utilized an experimental design to collect data on changes in pupil accommodation and blink rate through an eye tracker. Partici-pants completed a reading task while exposed to various text colors and ambient light conditions to evaluate visual fatigue and cognitive performance. The study's findings suggest that text color significantly affects visual fatigue, with red text causing the highest level of visual fatigue and yellow text causing the lowest level of visual fatigue. Improvements in ambient lighting reduce visual fatigue, but the degree of improvement varies depending on the text color. Additionally, cognitive performance is better when using yellow and white text but worse when using red text. Yellow text is the most effective choice for reducing visual fatigue under negative polarity. In-creasing ambient lighting can also improve visual fatigue in low-illumination conditions. These findings will offer valuable guidance for designing visual terminal device interfaces, especially for low-illumination or night environments, to minimize visual fatigue and improve the user ex-perience.

The generation of high-quality wideband frequency sweeps presents a significant challenge, particularly in modern telecommunication, radar, and measurement systems where miniaturization is paramount. While phase-locked loops (PLLs) have become the dominant technique for signal generation, their application in broadband sweeps necessitates fractional-N operation. This, in turn, degrades phase noise and introduces unwanted spurs. This paper proposes a novel approach for broadband signal generation. By cascading two PLLs and utilizing a coaxial resonator, we achieve a high-performance oscillator that operates without the excessive fractional spurs, maintaining their level below -80 dBc across the entire frequency band. The prototype demonstrates non-degraded phase noise performance, reaching -102 dBc/Hz at 100 kHz offset and -121 dBc/Hz at 1 MHz offset for signal at 10 GHz. Despite significant frequency jumps, our design achieves lock times below 41 µs. These results, supported by theoretical analysis, validate the proposed method's effectiveness in generating low-noise broadband frequency sweeps, ideal for local oscillator applications.

Background: Tibial shaft fractures are the most common of long bone fractures. The gold standard for management is locked intramedullary nailing. The freehand method under fluoroscopic monitoring is the most often utilized method for distal screw locking. Electromagnetic guidance-based distal screw locking methods have gained popularity recently. The study's objective is to evaluate the system using electromagnetic tracking data against the free-hand technique. Methods: Sixty-three patients who received intramedullary nailing for tibial shaft fractures at our institute between January 2018 and May 2022, were included in this study. Two groups of patients were distinguished: Group FH underwent freehand distal locking and intramedullary nailing, while Group SS underwent electromagnetically guided locking. Radiation exposure period, as well as dose area product, were noted and statistically compared. Results: In terms of dose area product, a mean value of 43.57±31.57 cGy/cm2 in group FH and a mean value of 27.62±11.20 cGy/cm2 in group SS (p < 0.05) was assessed. Concerning the duration of surgery a mean value of 128.83±26.51 minutes was reported in group FH and a mean value of 126.42±48.31 minutes in group SS (p > 0.05). Conclusions: This study confirms the use of electromagnetic-guided locking distal screws reduces the total time of exposure to ionizing radiation, with no difference in operating time.

(1) Background: The aim of this study was to investigate the circadian rhythms of tongue features according to the effects of physiological phases over a 24-hour period. (2) Methods: Fifteen healthy participants aged 20 to 69 years were recruited. The participants did not have current chronic diseases or past diseases and had to meet the inclusion and exclusion criteria. The participants stayed at the Gil Hospital for a duration of 2 nights and 3 days. On the first day, at 18:00, they consumed their allocated portions of food and water and then completed a questionnaire. At approximately 21:00, their tongue images were acquired using a computerized tongue image acquisition system, following which they slept for 8 hours, commencing at 23:00. Measurements were taken from 07:00 through 21:00 on the second day, and the final acquisition was taken at 07:00 on the following morning, resulting in a total of eight images. The circadian rhythm was authenticated and quantified utilizing the single cosinor analysis, a technique for periodic regression analysis for fitting a 24-hour cosine curve. (3) Results: Cosinor analysis revealed that all tongue features were significantly related to circadian rhythm. (4) Conclusions: The results of this study may be important for considering the time of day at which the tongue is observed and tongue status is evaluated.

The Double Random Phase Encoding (DRPE) image encryption method has garnered significant attention in color image processing and optical encryption, thanks to its parallel encryption of R, G, B. However, DRPE-based color image encryption faces two challenges. Firstly, it disregards the correlation of R, G, and B, compromising the encrypted image's robustness. Secondly, DRPE schemes relying on Discrete Fourier Transform (DFT) and Discrete Fractional Fourier Transform (DFRFT) are vulnerable to linear attacks, such as Known Plaintext Attack (KPA) and Chosen Plaintext Attack (CPA). Quantum walk stands out as a remarkable tool for designing modern cryptographic mechanisms, offering resistance to potential attacks from both classical and quantum computers.Therefore, this study presents an optical color image encryption algorithm that combines two-dimensional quantum walk with 24-bit plane permutation, dubbed OCT. This approach employs pseudo-random numbers generated by Two-Dimensional Quantum Walking (TDQW) for phase modulation in DRPE and scrambles the encrypted image's real and imaginary parts using the Generalized Arnold Transform. The 24-bit plane permutation helps reduce correlation of the R, G, B, while the Generalized Arnold Transform bolsters DRPE's resistance to linear attacks. By incorporating TDQW, the key space is significantly expanded. Experimental results validate the effectiveness and security of proposed method.

Dynamic optical structural color is always desired in various display applications and usually involves active materials. Full-color generation, especially bi-directional full-color generation in both reflective and transmissive modes, without any active materials included has been rarely investigated. Herein, we demonstrate a scheme of bi-directional full-color generation based on a plasmonic metasurface modulated by rotation of the polarization angle of the incident light without varying the geometry and the optical properties of the materials and the environment where the metasurface resides. The metasurface unit cell consists of plasmonic modules aligning in three directions and is patterned in a square array. The metasurface structural color device generates full colors in both reflection and transmission. Based on the proposed polarization-dependent structural color, information encoding of three multiplexed animal images and quick-responsive (QR) codes is demonstrated to verify the efficient information encoding and decoding of the proposed scheme. The animals can be seen under different polarization incidence and the QR codes can be successfully decoded by the polarization rotation in transmission. The proposed bi-directional full-color generation metasurface has great potential in applications such as kaleidoscope generation, anti-counterfeiting, dynamic color display, and optical information encoding.

Mathematical algorithms relate satellite data of ocean color with the surface Chlorophyll–a con-centration (Chl-a), a proxy of phytoplankton biomass. These mathematical tools work best when they are adapted to the unique bio-optical properties of a particular oceanic province. Ocean color algorithms should also consider that there are significant differences between datasets derived from different sensors. Common solutions are to provide different parameters for each sensor or use merged satellite data. In this paper we use satellite data from the Copernicus merged product suite and in situ data from the southernmost part of the California Current System to test two widely used global algorithms, OCx and CI, and a regional algorithm, CalCOFI2. The OCx al-gorithm gave the best result, therefore, it was regionalized and, again, tested. The database was then separated according to (a) dynamic boundaries in the area, (b) bio-optical properties and (c) climatic condition (El Niño/La Niña). Regional algorithms were obtained and tested for each partition. The Chl-a retrievals for each model were tested and compared. The best fit for the data was for the regional algorithms that considered the climatic conditions (El Niño/La Niña). These results will allow the construction of consistent regionally adapted time-series and, therefore, demonstrates the importance of El Niño/La Niña events on the bio-optical properties of the area.

This investigation introduces an efficient method for assessing the reliability of semi-rigid steel frame connections in existing buildings, explicitly targeting the Top Angle and Seat Pad (TA-SP) semi-rigid connection commonly used in Australian cities' high-rise buildings. The moment capacity of these connections was examined through parameter power model testing, meticulously considering the bending, shear, and prying forces actions to determine the weakest elements in the connection system. A plastic hinge model was applied to ensure computational efficiency and accuracy in assessing the connections' ultimate strength. Comparatively, the finite element (F.E) method M−θ curves were introduced to scrutinise the nonlinear behaviour of the connection, providing validation for the predicted analytical approach. Further emphasis was placed on identifying the reliability of the weakest elements in the connection system, employing the First-Order and Second-Order Reliability Methods models to estimate their reliability index. The correlation between the model's failure probability and a percentile error was also explored, utilising Monte Carlo simulation reference for refined validation. Novel formulas and methodologies were introduced to compute the locked-chain-series system reliability, which accounts for the inherent material and geometric variability. The findings highlight the critical significance of the weakest element in determining the overall reliability of the existing TA-SP connection.

The application of smartphone-based color evaluation of passive sampling devices for gases has only been sparsely reported. The present review aims to compile available publications with respect to the configuration of the passive samplers, conditions of smartphone photographing, analytical procedure for color detection and quantification (including calibration processes), and their application to different target gases. The performance of the methods - whenever available - is presented regarding the analytical specifications selectivity, sensitivity, and limit of detection in comparison with other color evaluation methods of passive samplers. Practical aspects like requirements of instrumentation and ease of use will be outlined in view of the potential employment in education and citizen science projects. In one section of the review the inconsistent terminology of passive and diffusive sampling is discussed in order to clarify the distinction of information obtained from the uptake of the passive samplers between gas-phase concentration and the accumulated deposition flux of gaseous analytes. Colorimetric gas sensors are included in the review when applied in passive sampling configurations and evaluation is performed with smartphone-based color evaluation. Differences in the analytical procedures employed after the passive sampling step and prior to the detection of the colored compounds are also presented.

Color centers in diamond and nanodiamonds can be utilized as quantum sensors for measuring various physical parameters, particularly magnetic and electric fields, as well as temperature. Due to its small size and possible surface functionalization, fluorescent nanodiamonds are attractive systems for biological and medical applications since they can be used for intracellular experiments. This review focuses on fluorescent nanodiamonds for thermometry with nanoscale spatial resolution for living systems. The current state of the art, possible further development, and potential limitations will be discussed here.

Cutaneous melanoma (CM) is a candidate for screening programs, since its prognosis is excellent when diagnosed in an early disease stage. Targeted screening of those at high risk for developing CM, a cost-effective alternative to population-wide screening, requires valid procedures to identify the high-risk group. Self-assessment of the number of nevi has been suggested as a component of such procedures, but its validity has not yet been established. We analyzed the level of agreement between self-assessments and expert assessments of the number of melanocytic nevi in the area between the wrist and the shoulder of both arms based on 4548 study subjects in whom mutually blinded double counting of nevi was performed. Nevus counting followed the IARC protocol. Study subjects received written instructions, photographs, a mirror, and a “nevometer” to support self-assessment of nevi larger than 2 mm. Nevus counts were categorized based on the quintiles of the distribution into five levels defining a nevus score. Cohen’s weighted kappa-coefficient was estimated to measure the level of agreement. In the total sample, agreement between self-assessments and expert-assessments was moderate (raw agreement: 50.29%, weighted κ=0.596). Self-assessed nevus counts were higher than those determined by experts (mean differ-ence: 3.33 nevi). The level of agreement was independent of sociodemographic and cutaneous factors; however, participants’ eye color had a significant impact on the level of agreement. Our findings show that even with comprehensive guidance, only a moderate level of agreement between self-assessed and expert-assessed nevus counts can be achieved. Self-assessed nevus information does not appear to be reliable enough to be used in individual risk assessment to target screening activities.

Sorghum (Sorghum bicolor L.) ranks fifth as the most crucial cereal crop globally, yet its seed morphology remains relatively unexplored. This study investigated seed morphology in sorghum based on 115 mini core and 130 Senegalese germplasms. Eight seed morphology traits encompassing size, shape, and color parameters were assessed. Statistical analyses explored potential associations between these traits and resistance to three major sorghum diseases: anthracnose, head smut, and downy mildew. Furthermore, genome-wide association studies (GWAS) were conducted using phenotypic data from over 24,000 seeds and over 290,000 publicly available single nucleotide polymorphisms (SNPs) through the Genome Association and Prediction Integrated Tool (GAPIT) R package. Significant SNPs associated with various seed morphology traits were identified and mapped onto the reference sorghum genome to identify novel candidate defense genes.

In this paper, a low-power Injection-Locked Clock and Data Recovery (ILCDR) using 28nm FDSOI technology is presented. The back-gate auto-biasing of UTBB-FDSOI transistors allows us to create a QRO (Quadrature Ring Oscillator) reducing both size and power consumption. By injecting a digital signal into this circuit, we realize an Injection-Locked Oscillator (ILO) with low jitter. Thanks to the good performance of this oscillator, we propose a low power ILCDR with fast locking time and low jitter for burst-mode applications. The main novelty consists in the implementation of a complementary QRO based on back-gate control using FDSOI technology to realize a simple and efficient ILCDR circuit. With a Pseudo-Random Binary Sequence (PRBS7) at 868Mbps, the recovered clock jitter is 26.7ps (2.3%UIp-p) and the recovered data jitter is 11.9ps (1%UIp-p). With a 0.6V power supply, the power consumption is 318μW. The estimated Chip area is around 6600μm².

Currently, historical areas in China are facing issues of color authenticity and excessive commercialization. Colors, as an important element of historical areas, reflect their history and culture. However, there are some flaws in the existing research methods, so a more scientific and systematic method is needed to obtain accurate and objective color visualization results to promote the sustainable development of historical areas. In order to explore the methods and applications of visualizing the environmental color genes of historical areas, Shiquan Street in Suzhou, China was taken as the research object, ArcGIS 10.5 was used to obtain the street veiw photo samples, Matlab was used to summarize the architectural colors of the historical areas, and K-means clustering was used to generate the central color card of the historical areas, thus completing the color visualization of the historical areas, followed by further searching for the color patterns and central colors, so as to explore the strategies for sustainable development of historical areas. The various quantified color models of historical areas can explore the regional uniqueness and color locality of historical areas, which avoids problems such as homogenization of block colors, unclear styles and features, and excessive proportion of commercial colors caused by poor color guidance and control in the design related to historical areas, providing approaches to the research on the harmonious unity of environmental colors and features related to historical areas.

This study aimed to evaluate the discrepancies between genetic and visual coat color assignment in the Sarcidano Horse and to elucidate potential reasons. Individual DNA from 90 Sarcidano Horses was used for genetic assignment of coat color to explore the correspondence with individual forms containing phenotypical traits. The MC1R exon 1 and ASIP exon 3 have been genotyped and sequenced to obtain a picture of the coat color distribution in this breed. Surprisingly, once we compared the genetic results with the individual forms reporting the phenotypic data for each subject, a certain degree of non-correspondence between the phenotypic and genetic data in relation to coat color emerged. From the genetic analysis, Chestnuts (n = 58) resulted the most common Sarcidano Horse (n = 58), followed by a quite large number of Blacks (n = 28) and a very small number of Bays (n = 4), whereas phenotypic distribution resulted in 38 Chestnuts, 40 Bays, only 2 Blacks, and 10 Grays (without the possibility of recognizing the true color they carried). Chestnut resulted a very representative coat color, while many horses that visually identified as Bays were genetically Blacks. This discrepancy, that could be due to a variety of individual and external factors, including age, time of year, living situation and dietary condition, suggesting the importance of accurate coat color identification to ensure adequate features registration and reliable prediction of offspring’s coat color.

In recent times, using image-based deep learning techniques has been very useful for classifying fruits. However, mango is a particular challenge because its shelf life is directly related to the degree of maturity at the time of harvest, which is determined mainly through the visual assessment of the operators when sorting them, doing it incorrectly, coupled with the blows and compressions exposed during storage and transport, trigger the deterioration in their quality, hence the importance of this operation. In this sense, the purpose of this study focuses on designing a computational model based on Deep Learning that uses a convolutional neural network (CNN) parameterized to select mangoes according to their color tone based on their maturity stage. A dataset was established from 201 labeled images, then a CNN architecture was built, obtaining a model on which 3 criteria were evaluated: the number of convolution and grouping layers, the resolution of the input images and the number of training epochs required. As a result, an input image resolution of 32 x 32 pixels was achieved, the process included a convolution layer followed by pooling that fed another layer that processed the results and ended in an output layer with 2 neurons under the One Hot Encoding representation. The model required 20 epochs to perfect its training, achieving 96.04 % accuracy in mango image selection. This study supports the potential of CNNs in quality analysis through mango color selection, even in uncertainty scenarios.

In this paper, we use a machine learning method, known as Nonnegative Matrix Factorization, to extract from a given image some new information obtained from a number of color space representations. Such kind of information, termed ``metacolor'', can be considered as a particular color space representation of the image, which can be used to obtain a binary segmentation of the investigated image by distinguishing foreground and background pixels. Some numerical experiments prove that the proposed method shows improved results when compared with common simpler thresholding algorithms.

(1) Background: The research on the potential of regional food products, known for their rich bio-active compound content, could enhance human health in local populations. This is especially pertinent amid the Covid-19 pandemic and global trade disruptions; (2) Methods: The current study evaluated the physico-chemical composition using standard methods, antioxidant activity via DPPH, ABTS, FRAP, and CUPRAC methods, sorption capacity (at 10°C, 25°C, and 40°C with water activity ranging from 0.1 to 0.9) through the static-gravimetric method, and monolayer moisture content (MMC) calculated using the BET model; (3) Results: The approximate physi-co-chemical composition of laboratory-produced quince powder is as follows: proteins - 1.27g, carbohydrates - 75.80g, fats - 0.49g, fibers - 21.50g, ash – 2.31g, and nutritional value – 355.65kcal. Antioxidant activity is confirmed by all methods. The Modified Halsey model is recommended to describe the sorption isotherms with an S-shaped form. The MMC for the adsorption process ranges from 14.41% d.b. to 7.09% d.b., and for the desorption process, it ranges from 13.11% d.b. to 7.80% d.b.; (4) Conclusions: Seasonal and regional foods boast the best nutritional profiles, as they are cultivated and harvested at optimal ripeness in natural sunlight, preserving the essential vitamins and minerals in the food.

The sPHENIX experiment is a state-of-the-art jet and heavy flavor physics detector which successfully recorded its first Au + Au collision data at 200 GeV at RHIC. sPHENIX will provide heavy flavor physics measurements covering an unexplored kinematic region and unprecedented precision at RHIC to probe the parton energy loss mechanism, parton transport coefficients in quark-gluon plasma, and the hadronization process under various medium conditions. At the center of sPHENIX, the Monolithic-Active-Pixel-Sensor (MAPS) based VerTeX detector (MVTX) is a high-precision silicon pixel detector. The MVTX provides excellent position resolution and the capability of operating in continuous streaming readout mode, allowing precise vertex determination and recording a large data sample, both of which are particularly crucial for heavy flavor physics measurements. In this work, we will show the general performance of heavy-flavor hadron reconstruction. In addition, we will discuss the commissioning experience with sPHENIX. Finally, we will provide the projection of b-hadron and jet observables and discuss the estimated constraints on theoretical models.

Flower color is an important ornamental feature, often modulated by the contents of flavonoid. Chalcone synthase is the first key enzyme in the biosynthesis of flavonoid, but little is known about the role of R. delavayi CHS in flavonoid biosynthesis. In this paper, three CHS genes (RdCHS1-3) were successfully cloned from R. delavayi flowers. According to multiple sequence alignment and phylogenetic analysis, only RdCHS1 contained all the highly conserved and important residues, and classified into the cluster of bona fide CHSs. Thus RdCHS1 was then subjected for further functional analysis. Real-Time PCR analysis revealed that transcripts of RdCHS1 was the highest in leaves and lowest in root, did not match the anthocyanin accumulation patterns during flower development. Biochemical characterization displayed that RdCHS1 could catalyze p-coumaroyl-CoA and malonyl-CoA molecules to produce naringenin chalcone. Physiological function of RdCHS1 was checked in Arabidopsis mutant and tobacco, the results showed RdCHS1 transgenes could recover the color phenotypes of tt4 mutant and made tobacco flower color from pink to dark pink through modulating the expression of endogenous structural and regulatory genes in tobacco. All these results demonstrated that RdCHS1 is a bona fide CHS and contribute to flavonoid biosynthesis in R. delavayi.

This study aimed to investigate the coloring ingredient potential of liver homogenates that form Zn-protoporphyrin (ZnPP), a natural red pigment, after anaerobic incubation. The liver homogenates were used to develop nitrite-free sterile pork liver pâtés. These liver homogenates can be applied in the formulation of pâtés directly or as a centrifuged insoluble fraction that is highly concentrated in ZnPP. Both the whole homogenate and its insoluble fraction were adjusted to pH 7.5 before their use in the formulation of pâtés with and without antioxidant (0.5% ascorbate plus 0.1% tocopherol) addition. Pâtés formulated with the whole homogenate showed color and texture characteristics similar to those of the positive control with nitrite. However, high levels of the insoluble fraction also led to pâtés with improved color characteristics but with a two-fold softened texture. Therefore, the form and amount of ZnPP added played a role in the final appearance of the product. The ZnPP pigment was more stable than heme was in the sterilization treatment, and antioxidant addition proved to be unnecessary. The ZnPP-rich ingredients allowed for the preparation of nitrite-free cooked liver pâtés with a stable red color and could be potentially applied in other uncured cooked meat products.

This paper offers a novel geometric and visual approach to the renowned Four Color Map Theorem and K5 non-planarity problem while unveiling their profound connection to the "kissing number" problem in 2D. We represent planar graphs through circles and tangents, simplifying complex structures and shedding light on these classic problems. Our proofs by contradiction, rooted in the kissing number concept, reveal that both the Four Color Map Theorem and K5 non-planarity are fundamentally linked, as they pivot around the concept of coloring. This study bridges the realms of geometry and graph theory, providing fresh insights and emphasizing the significance of the kissing number problem in various fields.

Tea infusions are the most consumed beverages in the world after water, their pleasant yet peculiar flavor profile drives consumer choice and acceptance and becomes a fundamental benchmark for industry. Any qualification method capable of objectifying the product's sensory features effectively supports industrial quality control laboratories guaranteeing high sample throughputs even without the human panel intervention. The current study presents an integrated analytical strategy acting as an Artificial Intelligence decision tool for black tea infusion aroma and taste blueprinting. Key markers validated by sensomics are accurately quantified in a wide dynamic range of concentrations. Thirteen key aromas are quantitatively assessed by standard addition with in-solution solid-phase microextraction sampling followed by GC-MS. On the other hand, nineteen key taste and quality markers are quantified by external standard calibration and LV-UV/DAD. The large dynamic range of concentration for sensory markers is reflected in the selection of seven high-quality teas from different geographical areas (Ceylon, Darjeeling Testa Valley and Castleton, Assam, Yunnan, Azores, and Kenya). The strategy acts as an AI smelling and taste machine predicting teas sensory features without the human panel intervention.

Natural dyes offer a bio-based opportunity to support attractive coloration to textile fabrics made from natural fibers like cotton, wool, hemp and many other materials. They can be part of a strategy to realize fully bio-based textile materials and clothing. Following this statement, the actual study investigates the use of wood extracts for dyeing of cotton fabrics. Actually extract powders of Logwood (Haematoxylon campechianum L.), Brazilwood (Caesalpinia spp.), and Quebracho wood (Schinopsis lorentzii) are used. The dyeing process is modified using different mordants based on iron and aluminum salts. These mordants are applied in pre-, meta- or post-mordant procedures. Color and fastness properties of prepared textile samples are determined by spectroscopic measurements, color measurements, washing procedures and Xenotest for measuring the light fastness. Finally, a broad range of different colorations can be realized by different combinations of wood extracts and mordanting procedures. A good wash fastness is reached for some color shades. For reaching good wash fastness, pre- and meta-mordanting procedures are more advantageous compared to post-mordanting. However, the light fastness of realized samples is only moderate to low. In conclusion, it can be stated that dyes from wood extracts are excellent materials to dye natural fibers if they are combined with the right mordanting agent in pre- or meta-mordanting procedures. The actual study is therefore a good proof-of-concept for the realization of fully bio-based colored textile materials.

In recent years, green and healthy foods have attracted much attention. Plant-based foods have become a new trend to replace animal-derived foods. In this study, we used walnut and purple rice as the primary raw materials to produce yogurt. The process included boiling, mixing, grinding, inoculation, fermentation, and sterilization. We then analyzed the similarities and differences between the resulting walnut purple rice yogurt and unfermented walnut purple rice milk, as well as dairy-based yogurt, in terms of physical chemistry, flavor, and sensory characteristics. We also examined the similarities and differences between fermented walnut purple rice milk and conventional warm yogurt. The study results revealed that walnut purple rice yogurt exhibited greater viscosity than walnut purple rice milk and conventional dairy-based yogurt. Additionally, the former displayed enhanced stability and recovery ability. Notably, distinguishable differences were observed between the three types of yogurts in terms of the presence of unknown volatiles and the umami signal as indicated by electronic nose/tongue and GC-IMS analyses. The umami flavour of walnut purple rice yogurt surpasses that of traditional dairy-based yogurt, whilst its salty taste is lower than that of walnut purple rice milk. Despite possessing a weaker aroma than dairy-based yogurt, it is more potent than walnut purple rice milk. Additionally, its relative abundance of olefins, ketones, and alcohols enhances its unique flavour profile, surpassing both other options. Based on sensory analysis, it can be deduced that walnut purple rice yogurt has the highest overall acceptance rate.

Structural hydroxide groups in layered magnesium-aluminum double hydroxides were partially replaced by fluoride ions. Fluorinated and fluorine-free materials were used as hosts for two dyes, carminic acid and hydroxyl naphthol blue, resulting in a hybrid pigment color palette. Additionally, the pigments were protected with a magnesium hydroxide phase to prevent the color from fading over time. The color properties of the pigments were significantly influenced by the host of dye, since the presence of fluorine directly influences the acid-base properties of the layered double hydroxides. Finally, the pigments were successfully applied to prepare colored creams.

The diversity of leaf characteristics, including leaf color, is a prominent subject of study in plant science. Leaf color is predominantly determined by the synthesis and functionality of chlorophyll, a key component of photosynthesis. The regulation of chlorophyll synthesis and degradation involves complex gene interactions, and disruptions in these processes can lead to abnormal chlorophyll synthesis and impact leaf color. This study focuses on Bambusa multiplex f. silverstripe, a natural variant with various leaf colors, including green, white, and green-white leaves. The variations in leaf color are attributed to genetic factors and their influence on gene expression. By employing RNA-seq, we investigate the molecular mechanisms behind chlorophyll anomalies and genetic factors in Silverstripe. Our findings shed light on the complexity of gene interactions and regulatory networks that underlie leaf color diversity and provide valuable insights for future research and plant breeding.

As for their large surface area and pore volume, three-dimensional covalent organic frameworks (3D COFs) have emerged as competitive porous materials. However, due to the structural dynamic behavior particularly for imine-linked 3D COFs, potentially unlock their potential for gas storage application. Herein, we showed a pre-locked linker strategy introduces breaking dynamic behavior in 3D COFs. A predesigned planar linker based 3,8-diamino-6-phenylphenanthridine (DPP) was prepared to produce non-dynamic 3D JUC-595, as benzylideneamine moiety in DPP locked the linker flexibility and restrict the molecular-bond rotation of the imine linkages. Upon solvent inclusion and release, the PXRD profile of JUC-595 remained intake, while JUC-594 with flexible benzidine linker experienced crystal transformation due to framework contraction-expansion. As a result, the activated JUC-595 achieved higher surface areas (754 m² g-1) than that of JUC-594 (548 m² g-1). Furthermore, improved CO2 and CH4 storages were also seen in JUC-595 compared with JUC-594. Impressively, JUC-595 recorded high normalized H2 storage capacity that surpass other reported high surface area 3D COFs. This works shows important insight on manipulating structural properties of 3D COF to tune the gas storage performance.

Background: Thyroid nodules are common, affecting nearly 65% of the general population. While they are widespread, it's crucial to recognize that the majority of these nodules are not cancerous and can be effectively managed through careful monitoring. Thyroid ultrasound is commonly used to evaluate thyroid nodules owing to its low cost, wide availability and technical ease of application. In sonography, it's crucial to assess characteristics and vascular flow. Yet, conventional color and power Doppler ultrasound may not always effectively capture small vessels and low velocities due to their limitations. Superior Microvascular Imaging can display the blood flow of small vessels and low-velocity blood flow, which is difficult to visualize with conventional Doppler ultrasound. Meanwhile other thyroid scans, that utilize either [99mTc] pertechnetate or (18)F-fluorodeoxyglucose, can categorize nodules as hyperactive ('hot'), exhibiting normal activity ('warm'), or having reduced/no activity ('cold'). Thus, the main goal of screening and tracking thyroid nodules is to improve the management of potentially worrisome thyroid malignancies. Methodology: The study was conducted within the structural framework of a network meta-analysis, with the index tests being - SMI, Radionuclide Scanning and Color Doppler, and the general link between them being the reference gold standard. The data collection involved searching for all pertinent literature using PubMed, Google Scholar, and the Cochrane Library databases. The essential data was extracted following the application of specific inclusion and exclusion criteria.This meta-analysis included 7 RCTs with 1,152 patients for Radionuclide Scanning, 10 RCTs with 1,847 patients for SMI and 8 RCTs with 4,480 patients for Color Doppler. They were analyzed using the QualSyst tool and the risk of bias was evaluated by using QUADAS-2 analysis.The statistical software packages MetaDiSc 1.4, RevMan (Review Manager, version 5.3), SPSS (Statistical Package for the Social Sciences, version 20) and Excel in Stata 14 were used to perform the statistical analyses. Result: According to the findings, the sensitivity for Radionuclide Scanning is calculated as 0.79 (range: 0.76 to 0.81) and specificity as 0.55 (range: 0.50 to 0.60) with a 95% confidence interval. The overall diagnostic odds ratio (DOR) for Radionuclide Scanning Is 10.54.Additionally, with a 95% confidence interval, SMI exhibits a sensitivity of 0.82 (with a range of 0.79 to 0.84) and a specificity of 0.86 (with a range of 0.84 to 0.88), while the overall DOR is approximately 25.73. Color Doppler demonstrates a calculated sensitivity of 0.71 (ranging from 0.69 to 0.74) and specificity of 0.81 (ranging from 0.79 to 0.83) with a 95% confidence interval, while its DOR is 13.48.Conclusion: As evidenced by this meta-analysis, blood flow dependent imaging techniques are superior in their abilities to be used as diagnostic tests, especially in conjunction with their use in detecting thyroid nodules. This study offers a starting point for delving deeper into the utilization of Radionuclide Imaging, Superior Microvascular Imaging and Color Doppler in diagnosing thyroid nodules in a clinical setting. Key Words: - Thyroid Nodule, Radionuclide Scanning, Superior Microvascular Imaging, Color Doppler Diagnosis, Sensitivity, Specificity, Diagnostic imaging

The cooking method is extremely important for the production of low-salt, wet-marinated, fermented golden pomfret because it strongly influences its flavor components and organoleptic quality. There are also significant differences in flavor preferences in different populations. The present study analyzed differences in the aroma characteristics of wet-marinated fermented golden pomfret after boiling, steaming, microwaving, air frying and baking using a combination of an electronic nose, GC-IMS and SPME-GC-MS. Electronic nose PCA showed that the flavors of the boiled (A), steam (B) and microwave (C) treatment groups were similar, and the flavors of baking (D) and air frying (E) were similar. A total of 72 flavor compounds were detected in the GC-IMS analysis, and comparative analysis of the cooked wet-marinated and fermented golden pomfret yielded a greater abundance of flavor compounds. SPME-GC-MS analysis detected 108 flavor compounds, and the results were similar to the baking and air frying. Twelve key flavor substances, including hexanal, isovaleraldehyde, and (E)-2-dodecenal, were identified by orthogonal partial least squares discriminant analysis (OPLS-DA) and VIP analysis. These results show that cooking method is a key factor in the flavor distribution of wet-marinated fermented golden pomfret, and consumers can choose the appropriate cooking method accordingly.

To study the mechanism of light color on a sea urchin (Tripneustes gratilla), blue light (B, λ450nm), yellow light (Y, λ585-590nm), red light (R, λ640nm), green light (G, λ510nm), white light (W, λ400-780nm) and darkness groups (H) were set up in a seawater recirculating aquaculture system. Six different LED light color treatment groups with a photoperiod of 12 L:12 D were tested for 30 d to investigate the effects of different light colors on the feeding, growth and enzyme activities of T. gratilla (142.45±4.36 g). We found that varying LED light colors significantly impacts the feeding, growth, and enzyme activity of T. gratilla. Notably, the sea urchins in group B exhibited better growth with a weight gain rate of 39.26%, while those in group R demonstrated poorer growth with a weight gain rate of only 26%. The feeding differed significantly (P<0.01) between groups B and R, with group B consuming the highest daily intake (6.03±1.69 g) and group R consuming the lowest (4.54±1.26 g). Throughout the three phases, there was no significant change in the viability of the AMS (P>0.05). Conversely, pepsin viability significantly increased (P<0.01) in group B. LPS viability remained consistently at the lowest level, with no notable differences in group W from those observed in group B. In group R, both AMS and pepsin viability remained lower, whereas lipase viability was noticeably higher in each phase compared to group B (P<0.01). Regarding antioxidant enzymes, group R exhibited a trend of initially increasing and then decreasing CAT, SOD, and GSH-PX activities, particularly during the third stage (15-30 d), with a significant decrease observed in antioxidant enzyme activities (P<0.01). The outcomes suggest that blue light positively affects the growth, feeding, digestion, and antioxidant capacity of T. gratilla in comparison to other light environments, whereas the red light has an inhibitory impact.

Depression and cognitive impairment are recognized complications of COVID-19. This study aimed to assess cognitive performance in clinically diagnosed post-COVID depression (PCD) patients using neuropsychological testing. The study involved 71 post-COVID patients, with matched control groups: recovered COVID-19 individuals without complications (n=18) and individuals without prior COVID-19 history (n=19). A post-COVID depression group (PCD, n=25) was identified based on psychiatric diagnosis, a comparison group (noPCD, n=46) included participants with neurological COVID-19 complications, excluding clinical depression. The PCD patients showed significantly less scores in the MoCA test, decreased immediate memory recall in the Word Memory Test, decreased processing speed and higher accuracy in the Trail Making Test, and near to significant worse executive control and processing speed in the Stroop task compared to controls and the noPCD patients. The number of post-COVID symptoms negatively correlated with immediate word memory recall and processing speed among all post-COVID patients. In PCD patients, negative correlations between number of post-COVID symptoms and delayed recall, between time after recovery and immediate recall, and positive correlation between the number of acute symptoms and processing speed in the incongruent condition of the Stroop task were found. No differences between groups in Sniffin’s stick olfactory test was found. Overall, our study revealed cognitive impairment in PCD patients similar to those in major depressive disorder.

To follow the growth and development of each tree (N = 1200) Pinus sylvestris L., var. Negorelskaya starting from the seed and continuing at the juvenile (or even generative) stage is the goal of an ambitious project to create a plant passport if possible. Five datasets of replenished empirical (tab-ular and file) and systematic data reflect the early results of a unique ongoing experiment conducted with families moved along a climatic gradient from the collection area (1731 degree days, 722 mm) to the experimental area (2326 degree days; 786 mm). Datasets of morphometric, VIS-spectrometric, and germination seed data, combined with the first results of biometric data (including the Dickson quality index) of seedlings produced from these seeds, will allow scientists in the future to conduct correlation and other statistical analysis, or train a neural network to determine the presence of connections between a seed and a plant. These data contribute to the early non-destructive diag-nosis and grading of seeds according to VIS-spectrometric properties. This dataset structure can complement the FLR-Library. In the future, by tracing seedlings in their early growth (for example, over three growing seasons at the site being restored), it will be possible to determine the degree of intensification of FRM production depending on the initial properties of the seed.

The use of clays in beauty care comes from ancient times, with therapeutic use since prehistory, and it is considerably relevant in the current cosmetic industry worldwide. In our review, we described types of clay and clay minerals used in cosmetics and dermocosmetics, compositions, usages as active compounds and excipients, and observations about formulation techniques. From this research, we could notice that although many scientific and specialized literature reported the characterization of clays, only some involving efficacy tests when incorporated into cosmetic products, mainly concerning haircare applications. By the exposed, our review could be considered and encouraged in the coming years to provide scientific and technical information for the cosmetic industry regarding the multifunctional use of clays and clay minerals.

The integration of robotics and image processing has led to the realization of robot autonomy in dynamic environments through the provision of visual feedback. This paper presents the application of parallel and open-link robots in palletizing and shape drawing tasks as enhanced by visual feedback from image processing. In determining the set of joint angles that could be used to reach the desired position and orientation of the end effector, the geometric approach in which the spatial geometry of the robotic arms was decomposed into several plane geometry problems was employed. Image processing techniques were used to enhance the performance of the robotic manipulators. In one approach, Color-based segmentation was used to distinguish between different objects in the workspace by using predefined color markers as references in the L*a*b color space. Classification of each pixel in the workspace image was then done by calculating the Euclidean distance between that pixel and a predefined color marker. A second approach employed Edge detection to identify the boundaries of objects within the workspace image by employing the Hough Transform mathematical model to detect the abrupt changes in the image brightness pixel-wise. The pixel locations from Hough were then sorted sequentially to outline the detected object. The integration of image processing with the robotic tasks was expected to improve the precise detection of the position of objects as well as the outline of geometric shapes. The incorporation of visual feedback allowed for dynamic robot manipulation in which prior knowledge of the workspace was not requisite. This led to improved pick and place as well as shape detection as applied in palletizing and shape drawing tasks actuated by the parallel and serial link manipulators, respectively.

Olive fruits at different ripening stages give rise to various table olive products and oil qualities. Therefore, developing an efficient method for recognizing and sorting olive fruits based on their ripening stages can greatly facilitate postharvest processing. This study introduces an automatic computer vision system that utilizes deep learning technology to classify the `Roghani` Iranian olive cultivar into five ripening stages using color images. The developed model employs convolutional neural networks (CNN) and transfer learning based on the Xception architecture and ImageNet weights as the base network. The model was fine-tuned by testing multiple configurations of well-known CNN layers. To minimize overfitting and enhance model generality, data augmentation techniques were employed. By considering different optimizers and two image sizes, four final candidate models were generated. These models were then compared in terms of loss and accuracy on the test dataset, classification performance (classification report and confusion matrix), and generality. All four candidates exhibited high accuracies ranging from 86.93% to 93.46% and comparable classification performance. In all models, at least one class was recognized with 100% accuracy. However, by taking into account the risk of overfitting, two models were discarded. Finally, a model with an image size of 224 × 224 and an SGD optimizer, which had a loss of 1.23 and an accuracy of 86.93%, was selected as the preferred option. The results of this study offer robust tools for automatic olive sorting systems, simplifying the differentiation of olives at various ripening levels for different post-harvest products.

Women of color (WoC) in the health professions encounter challenges in advancement to higher positions, disparities in wages, discrimination, lack of expectation to achieve leadership positions, and absence of extensive support networks. Articles in the literature have addressed race and/or gender in the context of professional development. However, applying an intersectionality lens or framework to better understand the contextual issues of professional development for WoC remains to be addressed. Thus, this scoping review aimed to (i) identify health professions literature that addresses disparities affecting WoC, and (ii) describe strategies and approaches to support WoC in the health professions. Methods: Literature searches were conducted in multiple databases. Three independent reviewers reviewed and screened articles for inclusion. Results: 31 articles were included - medicine(17), nursing(1), pharmacy(7), other(4), and multiple health professions(2). Key findings included underrepresentation of women and minority groups, inequities in professional advancement and leadership positions for WoC, and greater dissatisfaction and attrition among minority and women professionals. Conclusion: WoC face unique and distinct challenges and barriers in their professional careers resulting from the intersectionality of not only race and gender, but also lived experiences and opportunities. Strategies to improve diversity and representation should include an intersectionality framework or lens and be critically evaluated.

Supplemental light is widely applied in greenhouses for promotions of the product and flavors of strawberries in global markets. Present selections of colored lights are, however, quite empirical or qualitative, from the aspect of photometry or colorimetry. The accurate control of chromatic parameters of supplemental light and their chromatic influences on fruit quality has been under-studied. In this study, color parameters including correlated color temperatures (CCTs) and illuminance of supplement lights are precisely controlled using a digitally color-coding method. We systematically investigate the chromatic effect of supplemental light on five parameters of strawberries: plant height, single weight, fruit hardness, soluble solids, and titratable acids. Results show that the supplement light generally lowers down the single weight and the fruit hardness, increases the plant height, the contents of soluble solids and titratable acids. The chromatic dependences for the five parameters are different and might be strengthened, weakened, or shifted by light illuminance. We demonstrate the beneficial roles of supplemental light in accelerating the maturation and enhancing the flavor of strawberries in greenhouses cultivation. The results pro-vide valuable guidance for the effective cultivation of strawberries. Moreover, the controlling method for accurate colors is ready for the implementation of supplemental lights in other fruits or plants.

This study aims to clarify the influence of photographic environments under different light sources on image-based SPAD value prediction. Radish leaf patches of 1.5 cm diameter were photographed under halogen or LED light. The input variables for the SPAD value prediction using random forests were RGB values, HSL values, and HSV values. Additionally, the light color temperature (LCT) and illuminance (ILL) were used as the input variables. Model performance was assessed using Pearson’s correlation coefficient (COR), Nash-Sutcliffe efficiency (NSE), and root mean squared error (RMSE). SPAD value prediction resulted in high accuracy in a stable light environment; CORRGB+ILL+LCT and CORHSL+ILL+LCT were 0.929 and 0.922, respectively. Image-based SPAD value prediction was effective under halogen light with a similar color temperature at dusk; CORRGB+ILL and CORHSL+ILL were 0.895 and 0.876, respectively. The HSL value under LED could be used to predict the SPAD value with high accuracy; COR, NSE, and RMSE were 0.972, 0.944, and 2.07, respectively. The partial dependence plots of the H value indicate a change from blue to green with increasing SPAD values. Further studies are required to examine this method under outdoor conditions in spatiotemporally dynamic light environments.

For Lentinula edodes, its characteristic flavor is the key determinant for consumer pref-erences. However, the tissue-specific volatile flavor variations of the fruiting body have been overlooked. Here, we comprehensively investigated volatile flavor profiles of different tissues including the pileus skin, context, gill and stipe of the fruiting body of two widely cultivated L. edodes strains (T2 and 0912). We show that the eight-carbon and sulfur com-pounds, which represented 43.2-78.0% and 1.4-42.9% to the total volatile emissions for strain 0912 and T2, dominated their volatiles profiles. The sulfur compounds could rep-resent 32.2% and 42.9% to the total volatile emissions for the context of the strain 0912 and T2, respectively, whereas only represented 1.4% for the stipes of the strain 0912 and 9.0% for the skin of strain T2. Proportions of the predominant C8 compounds (1-Octen-3-one, 1-Octen-3-ol and 3-Octanone) and sulfur compounds (Lenthionine, 1,2,4-Trithiolane, Di-methyl disulfide and Dimethyl trisurfide) changed depending on tissues and strains. We further reveal that the overall volatile flavor profiles varied greatly in different tissues and strains. With machine learning algorithm, we show that volatile profiles could 100% pre-dict strains 0912 and T2. The prediction accuracy for different tissues could also reach 100%. Our results highlight the tissue-specific volatile flavor variations of the L. edodes fruiting body.

Any Hospital’s primary goal is to restore human health and save lives through health services provided to patients, but at the same time, hazardous wastes are produced. Inconsistent management of unsafe wastes might cause adverse effects and other issues to workers, the environment and public health. Segregation is considered the critical stage for a successful Healthcare Waste Management. Mixing hazardous waste with non-hazardous waste will be avoided by correctly applying practices at the segregation stage. This study aimed to assess personnel’s knowledge about Infectious Medical Waste and segregation practices used at six wards in Nicosia General Hospital. An analytical cross-sectional study was conducted, and data were collected through a structured self-administered questionnaire. The Statistical Package of Social Science (SPPS) version 25 was used with a minimum statistical significance α=0.05. The study population was nurses, nurse assistants, ward assistants and cleaners working at the study wards. Out of 191 questionnaires, 82 were received, with a response rate of 42.93%. Most participants were female (72%) and nurses (85,4%). Participants had medium to good knowledge about Infectious Medical Waste management and good knowledge regarding segregation practices applied in their ward. Segregation was not carried out as it should have since most participants stated that Infectious Medical Wastes were mixed with non-hazardous waste. Correct answers given by the participants regarding color-coding of different Healthcare Waste categories was 67.5%, and only four answered correctly to all questions. Although participants knew segregation practices and the colour-coding process applied for Healthcare Waste, they didn’t use them satisfactorily. They applied methods regarding segregation without specific training, knowledge and guidance. Due to the issue's importance, training programs must be implemented and performed.

Evaluating of long-term satellite-derived ocean color products using in-situ measurements is essential to ensure data quality and integrity. In this study, the Visible Infrared Imaging Radiometer Suite (VIIRS) remote sensing reflectance (Rrs) products were evaluated and analyzed by using long-term OC-CCI in-situ data from 2012 to 2021. The results demonstrate that the root mean square difference of VIIRS Rrs product accuracy in most bands is better than 0.002 (sr-1) when considering its average life span of 12 years. However, the VIIRS Rrs products in shorter wavelength bands (e.g., at 412 nm) had significantly lower accuracy in general and a long-term bias over the recent years. The annual precision of VIIRS Rrs products showed a declining trend especially in coastal or eutrophic waters. This accuracy deterioration of the VIIRS Rrs products suggests a strong need for continuous monitoring of its performance and further efforts on improving the atmospheric correction algorithm to specifically deal with satellite records at high SZAs and OZAs.

Optimum postharvest storage conditions increase the shelf life and postharvest quality of horticultural crops. The effects of forced-air precooling (FAP) and modified atmosphere packaging (MAP) on shelf life, physicochemical quality, and health-promoting properties of bell pepper (Capsicum annuum L. cv. Nagano) harvested at 90% and 50% coloring stages in May and July respectively, stored at 11℃, 95% relative humidity were assessed. Fruits were treated with FAP + 30 μm polyethylene liner (FOLO), FAP (FOLX), 30 μm polyethylene liner (FXLO), and control (FXLX). The quality attributes, viz. weight loss, firmness, color, SSC, soluble sugars, TPC, TFC, DPPH, and ABTS were evaluated. FOLO maintained sensory quality (weight loss, firmness, and color), physicochemical (soluble solids content and soluble sugars), and health-promoting properties compared to other treatments during storage. The investigated parameters differed significantly (p < 0.05) among treatments except soluble sugars. The 50% coloring fruits had a huge variation between treatments than 90% coloring. The results revealed more TPC and antioxidant capacity in 50% than in 90% coloring fruits. The study highlights the need to consider the ideal fruit coloring stage at harvest under the effect of FAP and MAP treatments in preserving bell pepper's postharvest quality and shelf life.

Background: Ultrasonography (US) represents the gold standard imaging method for the assessment of testicular lesions (TL). The gray-scale (GSUS) and color-Doppler (CDUS) ultrasound examination allow sonographers to investigate size, margins, echotexture and vascular features of TL, with the effort to differentiate benign from malignant lesions. Recently, the use of contrast-enhanced US (CEUS) and sonoelastography (SE) led to further improvements in the differential diagnosis of TL. Although GSUS and CDUS are often sufficient to suggest the benign or malignant nature of TL, CEUS can be decisive in the differential diagnosis of unclear findings, while SE can help to strengthen the diagnosis. The contemporary combination of GSUS, CDUS, CEUS and SE led to a new diagnostic paradigm named multiparametric US (mp-US), able to provide a more detailed characterization of TL than the single techniques alone. This narrative and pictorial review is aimed to describe the mp-US appearance of several TL. Methods: An extensive Medline search was performed identifying studies in the English language focusing on mp-US evaluation of TL. Results: a practical mp-US “identity card” and iconographic characterization of several benign and malignant TL is provided herein. Conclusions: the mp-US characterization of TL reported herein can be useful in daily clinical practice.

The valley pseudospin properties of electrons in two–dimensional hexagonal materials result in lots of fascinating physical phenomena, which opens up the new field of valleytronics. The valley-contrasting physics aims at distinguishing the valley degree of freedom based on valley–dependent effects. Here, we theoretically demonstrate that both of the valley–selective high harmonic generation and valley–selective electronic excitation can be achieved by using an orthogonal two–color (OTC) laser field in gapped graphene. It is shown that the asymmetry degrees of harmonic yields in the plateaus, cutoff energies of generated harmonics and electron populations from two different valleys can be precisely controlled by the relative phase of the OTC laser field. Thus the selectivity of the dominant valley for the harmonic radiation and electronic polarization can be switched by adjusting the relative phase of the OTC laser field. Our work offers an all–optical route to produce the valley–resolved high harmonic emissions and manipulate the ultrafast valley polarization on a femtosecond timescale in condensed matter.

High-quality ionization injection methods for Wake Field Acceleration driven by lasers or charged beams (LWFA/PWFA) can be optimised so as to generate high-brightness electron beams with tuneable duration in the attosecond range. We present a model of the minimum bunch duration obtainable with low-emittance ionization injection schemes, by spotting the roles of the ionization pulse duration, of the wake field longitudinal shape and of the delay of the ionization pulse position with respect to the node of the accelerating field. The model is tested for the resonant multi-pulse ionization injection (ReMPI) scheme, showing that bunches having length of about 300as can be obtained with a ionization pulse having duration of 30fs FWHM

Abstract: The two-dimensional Fuzzy Transform was applied in image compression. The quality of the image compressed with this methodis better than that obtained using methods based on fuzzy relation equations and comparable with that of the JPEG method, with better compression execution times. In this paper we propose a variation of the method based on the two-dimensional Fuzzy Transform of image compression, in which the image is first partitioned into blocks and then each block is compressed with the higher compression rate. The advantage of this method consistsinto a greater compression of the image, guaranteeing a high quality of the reconstructed image.The results show that our method is better than the Fuzzy Transform method improving also the quality of the reconstructed image.

Intramuscular fat content (IFC) and meat color are vital indicators affecting pork quality. A significant positive correlation between IFC and redness meat color (a* value) indicates that these two traits are likely to be regulated by shared molecular pathways. To identify candidate genes, hub genes, and signaling pathways that regulate these two traits, we measured the IFC and a* value in 147 hybrid pigs and selected individuls with extreme phenotypes for transcriptome analysis. The results revealed 485 and 394 overlapping differentially expressed genes (DEGs) using DESeq2, limma, and edgeR packages affecting IFC and a* value, respectively. Weighted gene co-expression network analysis (WGCNA) identified four modules significantly correlated with IFC and a* value. Moreover, we integrated functional enrichment analysis results based on DEGs, GSEA, and WGCNA conditions to identify candidate genes, and identified 47 and 53 candidate genes affecting IFC and a* value, respectively. The protein-protein interaction (PPI) network analysis of candidate genes showed that 6 and 14 hub genes affecting IFC and a* value, respectively. These genes mainly participated in various pathways related to lipid metabolism and redox reactions. Notably, four crucial hub genes (MYC, SOX9, CEBPB, and PPAGRC1A) were shared for these two traits. After functional annotation of these four hub genes, we hypothesized that the SOX9/CEBPB/PPARGC1A axis could co-regulate lipid metabolism and myoglobin redox response. Further research on these hub genes, especially the SOX9/CEBPB/PPARGC1A axis, will help to understand the molecular mechanism of the co-regulation of IFC and a* value, which will provide the theoretical basis for improving pork quality.

Traditional diagnosis of patent foramen ovale (PFO) in the heart has involved the use of transcranial doppler (TCD). However, TCD is essentially a blind test that cannot directly visualize the location of blood vessels. Since TCD relies on qualitative assessments by examiners, there is room for errors, such as misalignment of the ultrasound's angle of incidence with the actual blood vessels. This limitation affects the reproducibility and consistency of the examination. In this study, we presented an alternative approach for assessing right-to-left shunt (RLS) associated with PFO using contrast transcranial color-coded doppler (C-TCCD) with bubble contrast. The patient under consideration had been diagnosed with an ischemic stroke through imaging, but the subsequent cardiac work-up failed to determine the cause. Employing C-TCCD for RLS screening revealed a confirmed RLS of Spencer’s three grades. Subsequently, transesophageal echocardiography (TEE) was conducted to evaluate PFO risk factors, confirming an 8 mm PFO size, a 21 mm tunnel length, a hypermobile interatrial septum, and persistent RLS. The calculated high-risk PFO score was 4 points, categorizing it as a very high-risk PFO. This case underscores the importance of C-TCCD screening in detecting RLS associated with PFO, especially in cryptogenic stroke patients when identifying the underlying cause of ischemic stroke becomes challenging.

Red color conversion materials have often been used in conventional white LEDs (light-emitting diodes) to enhance the insufficient deep red component and thus improve the color rendering property. Quantum dots (QDs) are one of the candidates due to their flexibility in controlling the emission wavelength, which is attributed to the quantum confinement effect. Two types of remote QD components, i.e., QD films and QD caps, were prepared and applied to conventional white LED illumination to improve the color rendering properties. Thanks to the red component near 630 nm caused by the QD components, the color rendering indices(CRIs) of both Ra and R9 could be increased to over 95. It was found that both the diffusing nature of the reflector and the light recycling process in the vertical cavity between the bottom reflector and the top optical films play important roles in improving the color conversion efficiency of remote QD components. The present study showed that the proper application of remote QDs combined with a suitable optical cavity can control the correlated color temperature of the illumination over a wide range, thus realizing different color appearances of white LED illumination. In addition, a high CRI of over 95 could be achieved due to sufficient excitation from fewer QDs due to the strong optical cavity effect.

Three-choice preferences for fermented sorghum teas (FST) were examined among 11 adult Ossabaw pigs. The objectives for experiments 1 and 2 (respectively) were to determine preference for: 1) one of three types of FST (white vs. sumac vs. roasted sumac), and 2) isocaloric control (+control; made isocaloric with sucrose), blended FST (3Tea; equal parts of white, sumac, and roasted-sumac), or a negative control (-control; distilled water; avoidance). Pigs were first conditioned to navigate a three-choice preference maze. For experiment 1, no clear preference behaviors for tea-type were observed. Pigs consumed nearly all the teas, but pigs consumed the least amount of tea in the first session. Pigs spent the most time with their heads in the bowl when 3Tea was offered, followed by +control, and the least time was -control.  Regardless of tea-type, adult pigs show a strong preference for FST, even over +control, which was sweetened water. Adult pigs likely prefer the complexity of flavors, rather than the sweetness alone.  Future projects that explore the health benefits of this sorghum formula will not be impeded by avoidance among adult pigs.

Background and objectives: Thoracolumbar fracture – dislocations (AO type C) are rare injuries that occur due to very high-energy trauma, and the result is transitional and rotational instability of the spinal column and neurological impairment. Several reduction maneuvers have thus far been published, each of which can be of use in certain specific situations. We developed a novel modification to the previously described reduction technique. Materials and methods: This is a retrospective review of the management of thoracic AO type C fracture-dislocations managed with a modified novel reduction technique. The success of the reduction and intraoperative iatro-genic complications such as dural tear and screw pull out were the outcomes analyzed. Results: A total of 4 cases were successfully reduced with this novel reduction technique. We did not note any complications such as a dural tear or screw failure with this modified novel reduction tech-nique. Conclusion: The novel modification to the reduction technique employed in the management of thoracic fracture-dislocations resulted in a successful reduction without the risk of iatrogenic complications due to the reduction maneuver.

Video capsule endoscopy (VCE) is increasingly used to decrease the discomfort among patients owing to its small size. However, VCE has a major drawback of not having narrow band imaging (NBI) functionality. The current VCE has the traditional white light imaging (WLI) only, which has poor performance in the computer-aided detection (CAD) of different types of cancer compared with NBI. Specific cancers, such as esophageal cancer (EC), do not exhibit any early biomarkers, making their early detection difficult. In most cases, the symptoms are unnoticeable, and EC is diagnosed only in later stages, making its 5-year survival rate below 20% on an average. NBI filters provide particular wavelengths that increase the contrast and enhance certain features of the mucosa, thereby enabling early identification of EC. However, VCE does not have a slot for NBI functionality because its size cannot be increased. Hence, NBI image conversion from WLI can be achieved only in post-processing at present. In this study, a complete arithmetic assessment of the decorrelated color space was conducted to generate NBI images from WLI images for VCE of the esophagus. Three parameters, namely, structural similarity index metric (SSIM), entropy, and peak-signal-to-noise ratio (PSNR), were used to asses the simulated NBI images. Results show the good performance of the NBI image reproduction method, with SSIM, entropy difference, and PSNR values of 93.215%, 4.360, and 28.064 dB, respectively.

Some recent studies show that filters in convolutional neural networks (CNNs) have low color selectivity in datasets of natural scenes such as Imagenet. CNNs, bio-inspired in the visual cortex, are characterized by their hierarchical learning structure, which appears to gradually transform the representation space. Inspired by the direct connection between the LGN and V4, which allows V4 to handle low-level information closer to the trichromatic input in addition to processed information that comes from V2/V3, we propose the addition of a long skip connection (LSC) between the first and last blocks of the feature extraction stage to allow deeper parts of the network to receive information from shallower layers. This type of connection improves classification accuracy by combining simple-visual and complex-abstract features to create more color-selective ones. We have applied this strategy to classic CNN architectures and quantitatively and qualitatively analyzed the improvement in accuracy while focusing on color selectivity. The results show that, in general, skip connections improve accuracy, but LSC improves it even more and enhances the color selectivity of the original CNN architectures. As a side result, we propose a new color representation procedure for organizing and filtering feature maps, making their visualization more manageable.

To digital grade the color fastness of fabrics after rubbing, an automatic grading method based on spectral reconstruction technology and BP neural network was proposed. Firstly, the modeling samples are prepared by rubbing the fabrics according to the ISO standard of 105-X12. Then, to comply with visual rating standards for color fastness, the modeling samples are professionally graded to obtain the visual rating result. After that, a digital camera is used to capture digital images of the modeling samples inside a closed and uniform lighting box, and the color data values of the modeling samples are obtained through spectral reconstruction technology. Finally, the color fastness prediction model for rubbing was constructed using the modeling samples data and BP neural network. The color fastness level of the testing samples was predicted using the prediction model, and the prediction results were compared with the existing color difference conversion method and curve fitting method. Experimental show that the prediction model of fabric color fastness can be better constructed using the BP neural network, where the root-mean-square error of the prediction for the training sample is 0.30, and the root-mean-square error of the prediction for the test sample is 0.25. The overall performance of the method is slightly better than the color difference conversion method, and it is significantly outperforming the curve fitting method. It can be seen that the digital rating method of fabric color fastness to rubbing based on spectral reconstruction and BP neural network has a high consistency with the visual evaluation, which will help for the automatic color fastness grading.

In order to apply visible light communication systems in different scenarios, this article utilizes an excellent temperature adjustable light source mixed with RGB LEDs, and applies it in a visible light communication system. It utilizes color division multiplexing technology to achieve three-channel communication, thereby improving the communication bandwidth of the system. The communication system adopts three constant current driving circuits to control the duty cycle of Pulse Width Modulation (PWM) of each channel, thereby changing the proportion of RGB LEDs, and obtaining different color temperatures to achieve the purpose of color control for mixed color LEDs. The experimental results show that when adjusting the color temperature, the change in luminous flux is very small, with fluctuations of less than 2.24%; When adjusting the brightness, the color temperature fluctuation is within 40K, which is less than the 50K color temperature limit that the human eye can distinguish, and the average color temperature error is 0.609%; Color tolerance less than 5.5×10-3 indicates good dimming effect, and the communication performance of the system is better in the high color temperature range, which is significantly superior to the low color temperature range. When the error rate is below 3.8×10-3, the total modulation bandwidth of the three channels reaches 11.7 MHz.

Beef potentiator is an important flavor enhancer in food industry, while it is prone to generating insufficient taste compounds and off-odor compounds during enzymatic hydrolysis of beef, resulting in poor flavor of beef potentiator. It has been extensively reported that sonication is capable of improving food flavor. However, the effect of sonication on the flavor of enzymatically hydrolyzed beef liquid (EHBL) was scarcely reported. Herein, we investigated the effect of sonication on the flavor of EHBL using quantitative descriptive analysis (QDA), physicochemical analysis and SPME-GC-olfactometry/MS. QDA showed that sonication had a significant effect on taste improvement and off-odor removal of EHBL. Compared with the control, sonication (40 kHz, 80 W/L) increased the contents of total nitrogen, formaldehyde nitrogen, total sugar, reducing sugar, free amino acids (FAAs) and hydrolysis degree of EHBL by 19.25%, 19.80%, 11.83%, 9.52%, 14.37% and 20.45%. Notably, sonication markedly enhanced the contents of sweet FAAs, umami FAAs and bitter FAAs of EHBL by 19.66%, 14.04% and 9.18%, respectively, which contributed to the taste improvement of EHBL. SPME-GC-olfactometry/MS analysis showed that aldehydes and alcohols were the main contributors to aroma compounds of EHBL, sonication significantly increased the contents of key aroma compounds and 115.88% of alcohols content in EHBL. Notably, sonication decreased contents of the fishy odorants, hexanoic acid and nonanal, markedly by 35.29% and 26.03%, which was responsible for the aroma improvement of EHBL. Therefore, sonication could become a new potential tool to improve the flavor of EHBL.

The present study sought to determine the effect of incorporating a Chitosan-TiO2 nano-composite on the color stability of pigmented Room Temperature Vulcanization (RTV) maxillofacial silicone subjected to a variety of accelerated aging conditions. The experimental setup consisted of one hundred groups of five disk-shaped specimens (22mm diameter, 2mm thick) each, created using RTV silicon elastomer type A-2186, with the total sample distributed into four groups based on the pigments combined with the silicon—specifically, brilliant red, blue, and yellow dry intrinsic pigments (at 0.2% concentration by weight) and a fourth group that remained non-pigmented. Each of these primary groups was further subdivided into five categories corresponding to the silicon variants treated with different nanoparticles—2% TiO2, 3% Chitosan, a hybrid nano-combination of 1% TiO2/Chitosan, 1% synthesized Chitosan-TiO2 Nanocomposite, and a control group devoid of nanoparticle additions. The synthesized Chitosan-TiO2 Nanocomposite was effectively prepared using the core-shell method. The color stability of each silicon category, irrespective of whether pigmented or non-pigmented was evaluated by calculating the color difference (ΔE) pre- and post-subjection to five distinct accelerated aging conditions: 30 hours in an antibacterial cleaning solution, six months in sebum, six months in sweat, UV-accelerated aging for 720 hours, and outdoor weathering for six months. Color measurements were taken using a Colorimeter within the CIELAB color system. Statistical analyses, including one-way ANOVA at a significance level of p < 0.05, were employed to discern significant differences among the various accelerated aging conditions across the five silicon categories. Further comparisons were made using Dennett's T3 multiple comparison test, Tukey HSD multiple comparisons, and a t-test, with SPSS for Windows version 27.0 as the software platform. Results indicated that all silicon types, whether pigmented or not, exhibited varying degrees of color change under different aging conditions. Red-colored samples, across all silicon categories, demonstrated significant color alterations after 720 hours of UV-accelerated aging, with the most pronounced change in the 3% Chitosan samples and the least in the 2% TiO2 samples. Six months of outdoor weathering led to a marked increase in ΔE values across all categories. The blue-pigmented silicon samples treated with 2% TiO2 showed the highest color modification, while the yellow-pigmented silicon and non-pigmented silicon also underwent significant color shifts, particularly in the control and Chitosan-TiO2 categories, respectively. The study underscores the pervasive influence of outdoor weathering on color stability across all silicon categories. It also demonstrates that while nanoparticle incorporation offers some resilience against accelerated aging, it fails to provide adequate protection against the specific effects of UV radiation encountered during outdoor weathering.

The buildup dynamics of diode-pumped passively mode-locked solid-state laser is thoroughly explored by the real-time measurement with temporal sampling rate up to 40 GHz. A concise cavity is developed to ensure the transient dynamics purely arising from the gain medium and saturable absorber. Experimental results reveal that the laser output in the buildup process exhibits numerous passively Q-switched pulses followed with a damped relaxation oscillation prior to the stable mode locking. Furthermore, it is confirmed that the laser output has already displayed single clean mode-locked pulses inside the first several Q-switched envelopes before stepping into the stage of relaxation oscillation. The present real-time exploration is expected to provide important information for practical applications with temporal modulation of the pump intensity.

Eugenol is a widely used fishery anaesthetic. This study investigated the effects of various concentrations of eugenol on blood physiological and biochemical indexes, and muscle flavor, in crucian carp (Carassius auratus). To determine the appropriate concentration of eugenol anesthetic for use in crucian carp transportation and production operations, we evaluated seven anaesthesia groups of 20, 30, 40, 50, 60, 70 and 80 mg/L and one control group (without eugenol) to determine the effects on blood physiological and biochemical indexes, and muscle flavor. The red blood cells and platelets of crucian carp decreased significantly (P<0.05) with eugenol treatment. With increasing eugenol concentration, the white blood cells and hemoglobin did not change significantly, whereas lactate dehydrogenase, alkaline phosphatase, alanine aminotransferase and aspartate aminotransferase increased significantly (P<0.05). The content of phosphorus, magnesium and sodium increased after anaesthesia, whereas the content of potassium decreased with increasing eugenol concentration. After anaesthesia, the content of albumin and total protein in the serum decreased with increasing eugenol concentration (P<0.05); triglyceride first increased and subsequently decreased (P<0.05); blood glucose content first increased and then decreased (P<0.05); and no significant difference was observed in total cholesterol content (P>0.05). No significant difference was observed in muscle glycogen and liver glycogen content after eugenol anaesthesia (P>0.05). The eugenol-based anaesthesia test did not indicate major liver histomorphological effects, but the very small number of gill sheet edema cases observed requires further study. Analysis of electronic nose data indicated that eugenol treatment affected the flavor of the fish. The anaesthesia concentration of 20–80 mg/L had little effect on the physiology and biochemistry of crucian carp, thus providing a reference for the application of eugenol in crucian carp transportation and experimental research.

Expanding previous efforts to survey the visual opsin repertoires of the Hemiptera, this study confirms that homologs of the UV- and LW-opsin subfamilies are conserved in all Hemiptera, while the B-opsin subfamily is missing from the Heteroptera and subgroups of the Sternorrhyncha and Auchenorrhyncha, i.e. aphids (Aphidoidea) and planthoppers (Fulgoroidea), respectively. Unlike in the Heteroptera, which are characterized by multiple expansions of the LW-opsin subfamily, the lack of B-opsin correlates with the presence of tandem-duplicated UV-opsins in aphids and planthoppers. Available data on organismal wavelength sensitivities and retinal gene expression patterns lead to the conclusion that, in both groups, one UV-opsin paralog shifted from ancestral UV peak sensitivity to derived blue sensitivity, thereby compensating for the lost B-opsin. Two parallel bona fide tuning site substitutions compare to 18 non-corresponding amino acid replacements in the blue-shifted UV-opsin paralogs of aphids and planthoppers. Most notably, while the aphid blue-shifted UV-opsin clade is characterized by a replacement substitution at one of the best-documented UV/blue tuning sites (Rhodopsin site 90), the planthopper blue-shifted UV-opsin paralogs retained the ancestral lysine at this position. The combined findings identify aphid and planthopper UV-opsins as a new valuable data sample for studying adaptive opsin evolution.

Computer vision models of salient object detection attempt to mimic the ability of the human visual system to select relevant objects in images. To this end, the development of deep neural networks on high-end computers has recently made it possible to achieve high performance. However, it remains a challenge to develop deep neural network models of the same performance for devices with much more limited resources. In this work, we propose a new approach for a lightweight salient object detection neural network model, inspired by the cone and spatial opponent processes of the primary visual cortex (V1), that inextricably link color and shape in human color perception. Our proposed model, namely CoSOV1net, is trained from scratch, without using backbones from image classification or other tasks. Experiments, on the most widely used and challenging datasets for salient object detection, show that CoSOV1Net achieves competitive performance (i.e. Fβ=0.931 on the ECSSD dataset) with state-of-the-art salient object detection models, while having low number of parameters (1.14M), low FLOPS (1.4G) and high FPS (211.2) on GPU (nvidia Geforce RTX 3090 TI) compared to the state-of-the-art in the salient object detection or lightweight salient object detection task. Thus, CoSOV1net turns out to be a lightweight salient object detection that can be adapted to mobile environments and resource-constrained devices.

J/ψ, a charmonium bound state made of a charm and an anti-charm quark, has been discovered in the 1970s and confirmed the quark model. Because the mass of charms quarks is significantly above the Quantum Chromodynamics (QCD) scale ΛQCD, charmonia are considered as excellent probes to test perturbative Quantum Chromodynamics (pQCD) calculations. Over the past decades, they have been studied extensively at different high energy colliders. However, their production mechanisms, which involves multiple scales, are still not very well understood. Recently, in high multiplicity p+p collisions at RHIC and at the LHC, a significant enhancement of J/ψ production yield has been observed, which suggests a strong contribution from the Multi-Parton Interaction (MPI). This is different from the traditional pQCD picture where charm quark pairs are produced from a single hard scattering between partons in p+p collisions. In this work, we will report the J/ψ normalized production yield as a function of normalized charged particle multiplicity over a board range of rapidity and event multiplicity in the J/ψ→μ+μ− channel with PHENIX Run 15 p+p data at \sqrt{s}=200 GeV. The results are compared with PYTHIA 8 simulations with the MPI option on and off. Finally, the outlooks of J/ψ in p+Au and Au+p collisions along with Color Glass Condensate (CGC) predictions and of multiplicity dependent ψ(2S)/J/ψ ratio in p+p data will be briefly discussed.

Efficient management of basal cell carcinoma (BCC) requires reliable assessments of both tumors and post-treatment scars. We aimed to estimate image similarity metrics that account for BCC's perceptual color and texture deviation from perilesional skin. 176 clinical photographs of BCC were assessed by six physicians using a visual deviation scale. Internal consistency and inter-rater agreement were estimated using Cronbach's α, weighted Gwet's AC2, and quadratic Cohen's Kappa. The mean visual scores were used to validate a range of similarity metrics employing different color spaces, distances, and image embeddings from pre-trained VGG16 neural network. The calculated similarities were transformed into discrete values using ordinal logistic regression models. The Bray-Curtis distance in the YIQ color model and rectified embeddings from the 'fc6' layer minimized the mean squared error and demonstrated strong performance in representing perceptual similarities. Box plot analysis and Wilcoxon rank-sum test were used to visualize and compare the levels of agreement, conducted on a random validation round between the two groups: ‘Human-System’ and ‘Human-Human’. The proposed metrics were comparable in terms of internal consistency and agreement with human raters. The findings suggest that the proposed metrics offer a robust, and cost-effective approach to monitoring BCC treatment outcomes in clinical settings.

Hand gestures are an essential part of human-to-human communication and interaction, and therefore for technical applications, the aim is increasingly to achieve interaction between humans and computers that is as natural as possible, for example by means of natural language or hand gestures. In the context of human-machine interaction research, these methods are consequently being explored more and more. However, the realization of natural communication between humans and computers is a major challenge. In the field of hand gesture recognition, research approaches are being pursued that use additional hardware such as special gloves to classify gestures with high accuracy. Recently, deep learning techniques using artificial neural networks have been increasingly proposed for the problem of gesture recognition without using such tools. In this context, in our approach convolutional neural network (CNN) will be explored in detail for the task of hand gesture recognition. CNN is a deep neural network that can be used in the field of visual object processing and classification. The goal of this work is to recognize ten types of static hand gestures in front of complex backgrounds and different hand sizes based on raw images without the use of extra hardware. We achieved good results with a CNN network architecture consisting of seven layers. Through data augmentation and skin segmentation, a significant increase of the model accuracy was achieved. On public benchmarks the ten gestures have been classified almost perfectly with a testing accuracy of 96.5%

This research assesses the classification of Arabic coffee into three primary variations (light, medium, and dark) using simulated data based on actual measurements of color information, antioxidant laboratory tests, and chemical composition tests. Two types of simulated data were generated, with the standard deviation of the measures varied. Multiple classifiers were used for classification. The findings demonstrate the use of color information in accurately distinguishing Arabic coffee types. The different CIE color values, as well as the excellent connection between color information and coffee classes, lead to flawless classification results. However, depending primarily on antioxidant information results in lower classification performance, with variability amongst classifiers due to increasing data complexity. Chemical composition information, on the other hand, possesses outstanding discriminatory strength, allowing faultless classification on its own. Certain characteristics, such as crude protein and crude fiber, show strong correlations and are critical in the classification of coffee types. Based on the findings, it is recommended to create a mobile application that uses image recognition to analyze coffee color while providing chemical composition information. End users, such as consumers, will be able to make informed judgments regarding their coffee preferences owing to this application.

Ningxiang pig is renowned breed for its exceptional meat quality, but it possesses suboptimal carcass traits. To elucidate the genetic architecture of meat quality and carcass traits in Ningxiang pigs, we assessed heritability and executed a genome-wide association study (GWAS) concerning carcass length, backfat thickness, meat color parameters (L.LD, a.LD, b.LD), and pH at two postmortem intervals (45 minutes and 24 hours) within a Ningxiang pig population. Heritability estimates ranged from moderate to high (0.30 ~ 0.80) for carcass traits and from low to high (0.11 ~ 0.48) for meat quality traits. We identified 21 significant SNPs, the majority of which were situated within previously documented QTL regions. Furthermore, the HMGA1 gene emerged as a pleiotropic gene correlated with carcass length and backfat thickness. The ADGRF1, FKBP5, and PRIM2 genes were associated with carcass length, while the NIPBL gene was linked to backfat thickness. These genes hold potential for use in selective breeding programs targeting carcass traits in Ningxiang pigs.

This study investigated the possible usage of beeswax oleogels instead of milk fat as a fat source in ice cream production and konjac gum as a stabilizer instead of salep. For this aim, 12 different ice cream samples were prepared using various fat and oil sources (milk fat and oleogel), stabilizers (salep and konjac gum), and emulsifiers (monoglyceride (MG), palsgaard (PG), and none emulsifier emulsifier-free (NE)). It was determined that the overrun ratio in ice cream samples containing milk fat was higher than in oleogel and the viscosity of the ice cream mix containing palsgaard and oleogel was greater than that of the other treatments (milk fat, MG, and NE). While the first dripping time of the samples with PG and konjac gum was longer compared to the samples without emulsifier (NE) and Monoglyceride (MG), the complete melting times of the samples were close to each other. Whereas the dissolution rate of the samples with salep was higher than that of konjac gum, the fat destabilization ratios of the samples with oleogel and konjac gum were lower than those of milk fat and salep. The fat destabilization ratio of samples containing PG as an emulsifier was statistically higher (p <0.01) than that of samples containing MG and NE. It was found that the unsaturated fatty acid (C18:1, C18:2, and C18:3) content of the samples containing oleogel was significantly higher (p <0.01) than that of the samples containing milk fat. However, butyric and caproic acids, which are aliphatic fatty acids, were found to be deficient in the samples to which oleogel was added instead of milk fat. As to the microscopic appearance, while water and oil particles were not homogeneously dispersed in the ice cream samples with oleogel, they were fully homogeneously dispersed in the milk fat-added ice cream samples. In addition, it was determined that panelists preferred the C samples (milk fat as fat source, salep and PG as emulsifier).Among the samples with added oleogel as oil source, they liked the J sample more (oleogel as fat source,conjak gum and none emulgator). Therefore, the C and J samples can be recommended for consumption

In this study, GC–IMS was used to analyze the volatile component and flavor profiles of Crassostrea gigas individuals of different ploidy and gender. Principal component analysis was used to explore overall differences in flavor profiles and a total of 54 volatile compounds were identified. The total volatile flavor contents in edible parts of tetraploid oysters were significantly higher than in diploid and triploid oysters. The concentrations of ethyl (E)-2-butenoate and 1-penten-3-ol were significantly higher of triploid oysters than in diploid and tetraploid oysters. In addition, the volatile compounds propanoic acid, ethyl propanoate, 1-butanol, butanal, and 2-ethyl furan were significantly higher in females than in males. The volatile compounds p-methyl anisole, 3-octanone, 3-octanone, and (E)-2-heptenal were present in higher levels in male than in female oysters. Overall, different ploidy and gender of oysters were being presented with different sensory characteristics, providing new insights for understanding the flavor characteristics of oysters.

Leaf color mutants (LCMs) are important resources for studying diverse metabolic processes such as chloroplast biogenesis and differentiation, pigments’ biosynthesis and accumulation, and photosynthesis. However, in Dendrobium officinale, LCMs are yet to be fully studied and exploited due to the unavailability of reliable RGs (reference genes) for qRT-PCR (quantitative real-time reverse transcription PCR) normalization. Hence, this study took advantage of previously released transcriptome data to select and evaluate the suitability of ten candidate RGs, including Actin (Actin), polyubiquitin (UBQ), glyceraldehyde-3-phosphate dehydrogenase (GAPDH), elongation factor 1-α (EF1α), β-tubulin (β-TUB), α-tubulin (α-TUB), 60S ribosomal protein L13-1 (RPL13AD), aquaporin PIP1-2 (PIP1-2), Intima protein (ALB3) and Cyclin (CYCB1-2) for normalizing leaf color-related genes’ expression levels via qRT-PCR. Stability rankings analysis via common software Best-Keeper, GeNorm, and NormFinder disclosed that both ten genes met the requirements of RGs. Of them, EF1α exhibited the highest stability and was selected as the most reliable. The reliability and accuracy of EF1α were confirmed through qRT-PCR analysis of fifteen chlorophyll pathway-related genes. The expression patterns of these genes via EF1α normalization were consistent with the results by RNA-Seq. Our results will pave the way for molecular dissection of leaf color mutations in D. officinale.

In this article, we introduce a new approach to human movement by defining the movement as a static object or a super object in one two-dimensional image. This method can allow researchers to label and describe the total movement as an object isolated from a reference video. This ap-proach allows us to perform various tasks, including finding similar movements in a video, measuring, and comparing movements, generating new similar movements, and defining chore-ography by controlling specific parameters in the human body skeleton. As a result of the pre-sented approach, we can eliminate the need to label images manually, disregard the problem of finding the beginning and the end of a movement, overcome synchronization issues between movements, and perform any deep learning network-based operation that processes super objects in images in general. As part of this article, we will demonstrate two application use cases: one il-lustrates how to verify and score a requested movement. In contrast, the other illustrates how to generate similar movements in the human skeleton space by addressing the challenge of supply-ing sufficient training data for deep learning applications (DL). A Variational Auto Encoder (VAE) simulator and an EfficientNet-B7 classifier architecture embedded within a Siamese twin neural network are presented in this paper in order to demonstrate two use cases. These use cases demonstrated the versatility of our innovative concept in measuring, categorizing, inferring hu-man behavior, and generating gestures for other researchers.

Recently, the popularity of fermented foods has increased significantly. Lactofermented vegetable juice products are particularly important for our diet. The combination of the richness of the ingredients derived from vegetable juices and the products formed during lactic fermentation is a valuable source of nutrients. This study aimed to analyse the selected properties of fermented beetroot, carrot, and beetroot-carrot juices. The juices obtained from beetroot and carrot were fermented with bacterial strains Lactiplantibacillus plantarum or Levilactobacillus brevis. Density, extract, dry matter content, pH, total acidity, pigments (betalain or carotenoids), color, and LAB count were measured in the samples. The results obtained in this study showed that the used LAB strains were capable of fermenting the analyzed juices. It was proven that Lactiplantibacillus plantarum was a better strain for fermentation ion of vegetable juice. This might have been influenced by the fermentation temperature and the duration of the fermentation. However, this strain had a lower effect on carotenoids, which are water-insoluble pigments, than Lactiplantibacillus plantarum. The opposite observation was made for betalain, a water-soluble pigment with nitrogen in its structure.

Knowledge of the temperature evolution is crucial to understand and control laser beam welding of low-melting materials. Existing temperature determination approaches are restricted to i) one-dimensional temperature information (e.g. ratio-pyrometers), ii) a priori knowledge of the emissivity (e.g. thermography) and iii) high temperature regions (e.g. two-wavelength imaging). In this paper, a ratio-based two-color-thermography approach is developed that allows for two-dimensional temperature determination in low-melting temperature ranges (< 1200 K). For static measurement situations it is demonstrated, that temperature can be determined despite variation in signal intensity and emissivity with high accuracy. The two-color-thermography set-up is further transferred into a commercial laser beam welding machine and experiments are conducted for varying process parameters. The direct application of the developed two-color-thermography system in dynamic process situations is limited as image artifacts presumably caused by internal reflections inside the optical beam path are present.

There is a growing demand for clean-label products. This study aimed to obtain a food-grade coloring ingredient for meat products based on the formation of Zn-protoporphyrin from porcine livers, thus contributing to the development of nitrite-free products. First, the effects of sodium disulfite, and acetic, ascorbic, and lactic acids on Zn-protoporphyrin formation and total microbial count were studied. The combination of ascorbic and acetic acid resulted in a higher Zn-protoporphyrin content than acetic acid alone and maintained microbial levels (ca. 3 log CFU/mL). Second, a response surface methodology was used to maximize Zn-protoporphyrin while maintaining microbiological food standards. The effects of pH (4.2–5.4), incubation time (3–30 h), and temperature (25–50 ºC) were studied. The selected conditions for Zn-protoporphyrin formation involved anaerobic incubation at pH 4.8 and 45 °C for 24 h. The safety was validated through challenge testing for relevant pathogens (Listeria monocytogenes, Salmonella spp., and Clostridium perfringens). A significant reduction (&gt; 6 log units) was observed for L. monocytogenes and Salmonella, whereas C. perfringens spores remained at inoculated levels. The optimized procedure is proven to be microbiologically safe, and it is proposed to improve the color of nitrite-free meat products.

At the LHC, the process of a Higgs boson decaying into bottom or charm quarks produced in association with a pair of top quarks, tt¯H, allows for an empirical exploration of the heavy-flavor quark Yukawa couplings to the Higgs boson. Accordingly, the cross sections for the tt¯ + heavy-flavor production without the appearance of the Higgs boson have been measured at the LHC in various phase spaces using data samples collected in pp collisions at s = 7, 8 and 13 TeV with the ATLAS and CMS experiments. Flavor ratios of cross sections of tt¯ + additional jets processes with different flavors are also measured. In this paper, the measured cross sections and ratios are reviewed and the prospects with more data are presented.

Jaundice is a common condition for newborns, and its complications can be severe and cause permanent damage to the patient’s brain if no action is taken at its early stages. Current methods for jaundice detection are invasive, which include collecting blood samples from the patient, which can be painful and stressful and may cause some complications. Alternatively, a non-invasive approach can be used to diagnose jaundice through image-processing and artificial intelligence (AI) techniques, requiring a database of infant images to achieve a high-accuracy diagnosis. This data article provides a collection of newborn images, called NJN, with various birthweight and skin tones, with ages ranging from 2 to 8 days, and an excel sheet file in CSV format for the values of RGB and YCrCb channels and the status for each raw which is freely accessible at (https://sites.google.com/view/neonataljaundice). It also provides Python code for data testing using different AI techniques. Thus, this article offers a unique resource for all AI researchers to train their AI system and develop algorithms to help neonatal intensive care unit (NICU) healthcare specialists monitor neonates and provide fast, real-time, non-invasive, and accurate jaundice diagnosis.

Modifiable THz spectral shapes are important tools that facilitate the comprehensive study of phonon dynamics in condensed matter systems. The generation of narrow bandwidth THz spectra with tunable center frequency which are suitable THz forms needed to achieve such objectives are currently less studied from the table top laser-induced plasma emitters’ perspective. This experimental research is aimed at developing a robust two-color laser induced plasma set-up comprising of a temporal pulse stretcher and an Optical Parametric Amplifier that generates chirped and wavelength tunable pulses respectively. By focusing and independently controlling the ω and 2ω arms of the chirped pulses resulting after the interaction with a β-BBO crystal, I aim to generate narrow bandwidth THz signal (from plasma) scalable at MV/cm intensity and tunable in a wide THz spectral range, in addition to varying the frequency ratio mix.

Deep learning (DL) models have been recently widely used to extract task-oriented patterns from large scale of datasets, and to improve the data image understanding and analysis accuracy in many different decision-making processes for tasks such as image classification, segmentation, detection, and so on. However, in practice, the performances of DL models are easily affected by environmental illumination conditions. Conversely, DL models can also be utilized for extracting the illumination hints from the images, and these hints are critically useful for improving the model robustness, classifying the environmental scenes, estimating scene depth information, and rendering 3D objects. In this study, an extensive and exhaustive review is carried out for DL based color constancy, indoor and outdoor illumination estimation, and image depth estimations with the considerations of strengths and weaknesses of DL models. This study also explores the different network designs and the paradoxes in parameter optimization during the model training. Current technology barriers involved in implementing these models and recommendations to overcome these barriers are also suggested in the review.

Color plays an important part in human activities, affects circadian cycle and decision making process. Therefore, it is important to investigate human judgment under different color of illumination, especially, because color perception is subjective. In this study, we developed required instrumentation to control the red (R), green (G), Blue (B) and Amber (A) colored light emitting diode (LED) lamp for carrying out Magneto Encephalography (MEG) brain scan. We developed a software to generate all the colors in the visual spectrum, predefined white light combinations and saturation of an illuminated objects by using RGBA color pallet. The lamp is required to control from outside of the MEG electromagnetically shielded room with the LED lamp located inside the MEG room. Hence, USB is used for the communication mode. The feasibility of using LED lamp with MEG brain scanner has been validated for bio-medical and psychological MEG experiments.

Satellite measurements are one of the main sources of data on the state of the marine environment. To obtain information about the sea brightness coefficient , it is needed to correctly carry out atmospheric correction. In the presence of dust aerosol over the Black Sea, physically incorrect values of the spectral brightness coefficient often occur, and specifically negative values in the IR region of the spectrum. The main objective of the study is to evaluate the influence of dust aerosol on the spectral dependence of sea brightness, based on analytical calculations from the transfer theory using the principle of plane-parallel layers and results of validation of AERONET-OC field and remote sensing data. The work analyzes spectral dependence of the first error eigenvector of the standard atmospheric correction in the presence of dust aerosol. As result it is given that with an absorbing aerosol, the atmospheric correction error is described by the spectral course of molecular scattering, i.e. close to

Geo-information about the spectral variability of the water-leaving radiance is the key to the validation of satellite and in situ measurements and the development of regional algorithms. In this study, using cluster analysis, five trends were identified that are characteristic of various phenomena in the northwestern part of the Black Sea (summer and winter blooms, turbid waters, river runoff). Typical values of the remote sensing reflectance coefficient are calculated for each case. Additionally, the standard values of the color indices for each cluster are calculated. It is shown that the ratio of the color index CI(412/443 nm) is slightly variable and equals 0.8±0.07.This can be a reference point for recovering incorrect (negative) satellite Rrs(λ) values in the shortwave region. In a similar way, the color index was calculated according to the MODIS and VIRS data, it was shown that on days with a turbid atmosphere (high AOT values), the standard deviation of the color index is 30%. For days with a clear atmosphere, the color index is close to the in situ results.

Data from ocean color (OC) remote sensing are considered a cost-effective tool for the study of biogeochemical processes globally. Satellite-derived chlorophyll, for instance, is considered an Essential Climate Variable since it is helpful in detecting climate change impacts. Google Earth Engine (GEE) is a planetary scale tool for remote sensing data analysis. Along with OC data, such tools allow an unprecedented spatial and temporal scale analysis of water quality monitoring in a way that has never been done before. Although OC data have been routinely collected at medium (~1 km) and more recently at high (~250 m) spatial resolution, only coarse resolution (≥4 km) data are available in GEE, making them unattractive for applications in the coastal regions. Data reprojection is needed prior to making OC data readily available in the GEE. In this paper, we introduce a simple but practical procedure to reproject and ingest OC data into GEE. The procedure is applicable to OC swath (Level-2) data and is easily adaptable to higher-level products. The results showed consistent distributions between swath and reprojected data, building confidence in the introduced framework. The study aims to start a discussion on making high resolution OC data readily available in GEE.

Enhancing underwater images in epicontinental sea is a challenging problem owing to the influence of ocean currents, the refraction, absorption and scattering of light by suspended particles, and the weak illumination intensity. Recently, different methods have relied on the underwater image formation model and deep learning techniques to restore the underwater image, but they tend to degrade underwater image, interference of background clutter and miss boundary details of blue regions. Improved image fusion and enhancement algorithm based on a priori dark channel is proposed in this paper. Image edge features sharpening and dark detail enhancement by homomorphism filtering in CIELab color space is realized. In RGB color space, the multi-scale retinal with color restoration (MSRCR) algorithm is used to improve color deviation and enhance color saturation, and the contrast-limited adaptive histogram equalization (CLAHE) algorithm is used to de fog and enhance image contrast. Finally, according to the dark channel images of the three processing results, the final enhanced image is obtained by linear fusion of multiple images and multiple channels. Experimental results demonstrate the effectiveness and practicality of the proposed method on various datasets.

Sun glint, i.e., direct solar radiation reflected from a water surface, negatively affects the accuracy of ocean color retrieval schemes if entering the field-of-view of the observing instrument. Herein, a simple and robust method to quantify the sun glint contribution to top-of-atmosphere (TOA) reflectances in the visible (VIS) and near-infrared (NIR) is proposed, exploiting concomitant observations of the sun glint’s morphology in the shortwave infrared (SWIR) characterized by reflectance contrasts typically higher than those resulting from other in-water or atmospheric processes. The proposed method, termed Glint Removal through Contrast Minimization (GRCM), requires high spatial resolution (ca. 10–50 m) imagery to resolve the sun glint’s characteristic morphology, meeting additional criteria on radiometric resolution and temporal delay between the individual band’s acquisitions. It has been applied with good success to a selection of Landsat 8 (L8) Operational Land Imager (OLI) scenes encompassing a wide range of environmental conditions in terms of observation geometry and glint intensity, as well as aerosol and Rayleigh optical depth. The method proposed herein is entirely image based and does not require ancillary information on the sea surface roughness or related parameters (e.g., surface wind), neither the presence of clear water areas in the image under consideration. Limitations of the proposed method are discussed, and its potential for sensors other than OLI and applications beyond glint removal is sketched.

Surimi-based products occupy an important position in the aquatic product processing industry. To enhance the quality and flavor of surimi-based products, the effects of pre-emulsified safflower seed oil on the texture, water-holding capacity (WHC), microstructure, and flavor of Nemipterus virgatus surimi gel was evaluated. The texture and whiteness of gel were improved, and the WHC increased (P &lt; 0.05) as the content of safflower seed oil increased up to 2 mL per 100 g surimi. Furthermore, the drops of pre-emulsified safflower seed oils with an average diameter of less than 0.10 μm were evenly distributed in gel matrix. Microstructure and infrared spectroscopy analyses indicated that low-content pre-emulsified safflower seed oil acted as filler particles to occupy void spaces, resulting in gel exhibiting a dense network structure. Volatile analysis showed the gel containing pre-emulsified oil enriched volatile compounds, mainly resulting from oxidation and decomposition of oils by the activation of lipoxygenase, which synergistically contributes to unique flavors of gel. Consequently, low-content pre-emulsified safflower seed oil can used to enhance the quality and flavor of N. virgatus surimi-based products. These findings are especially relevant to the current growing interest in low-fat and high-protein diets.

The article is dedicated to the role of polychrome solutions of the architectonic order in the concept of the Baroque façade. The ancient principles of designing architectural structures, inherited from the Renaissance were subjected to reinterpretations in order to impart different expressive values. The arrangements of façades, initially balanced or even horizontal, were replaced by ambiguous bivalent compositions. Vertical layouts began to dominate in the Baroque. Appropriately selected polychrome of the elements of the order could emphasize the compositional expression. The relationship between the layout of the polychrome in a given architectural order and the expression of a work of art has been established for quite a long time. However, the generally available data on color schemes of architectural structures in baroque buildings are still not fully organized. The paper analyses examples of Baroque façades preserved in their original state and revalorized in recent years after thorough conservator’s research in the field of architecture and color. The examples are mainly designed in the so-called great order, i.e. pertaining largely to church façades. In the Baroque, the vertical direction of the composition was strongly emphasized by multiplying or applying perspective arrangements of supports, and finally by embattled entablatures. The decisive field of change became the shaping of the coloristic decoration of the entablature – decisions regarding the material and color separation of elements of the frieze above the supports. The uniform color of all vertical elements of the façade structure guaranteed an unambiguous verticality of the composition.

The petrographic and petrophysical characteristics of three varieties of ignimbrites used in the architectural heritage of Arequipa (southwest Peru) are analyzed. The modal classification QAFP and TAS diagram discriminate their dacitic nature. Mercury injection porometry revealed very high porosity: 46.5% for white and beige ignimbrites and 35.5% for the pink variety. Ignimbrites contain intrusions of vulcanodetrital fragments and vacuoles that influence their predominantly non-linear mechanical behavior. Results of water absorption by capillarity (C) and ultrasound pulse velocity (UPV) demonstrated a slight anisotropy for the beige variety and near isotropy for white and pink ignimbrites, which justify the randomness of the application of the ashlars in the masonry and in the selection of the faces to carve. Surfaces with hollows in the white and beige ignimbrites are the result of the erosion of the acicular pumice that fills the vacuoles.

Abscisic acid (ABA) plays a major role in promoting ripening in sweet cherry, a non-climateric fruit. Exogenous application of ABA has been performed to study fruit ripening and cracking, but this growth regulator is not used for commercial production. To determine the potential of this growth regulator to improve sweet cherry fruit quality, ABA canopy spraying was assayed in four cultivars. Canopy spraying of S-ABA significantly: 1) enhanced sweet cherry fruit color in ‘Glenred’, ‘Lapins’ and 'Bing' cultivars, but not in ‘Royal Rainier’ (a bi-colored cultivar), and 2) decreased fruit size and firmness in ‘Lapins’, ‘Bing’ and ‘Royal Rainier’. Seasonally reproducible effects were seen in ‘Lapins’ (mid/late-maturing) but not in ‘Glenred’ (early-maturing). Canopy spraying of nordihydroguaiaretic acid (NDGA) decreased color and increased fruit size in ‘Lapins’, but not in ‘Glenred’. Direct application of ABA on fruits attached to the tree, without application to the foliage, increased Lapins' fruit color without reducing size. These results suggest a localized fruit response to exogenous ABA application on fruit color development, but that a decrease in fruit size may be due to the effects of exogenous ABA on the tree canopy foliage.

Often, engineers with machining experience often judge machining state and tool life according to chips’ features. Engineers' experience is digitized in this study. During the cutting process, the cutting tool coming in contact with the workpiece produces a shear zone, which causes plastic deformation and shear slip. The chips closest to the shear zone can directly show the state of the tool and workpiece when the material is SKD61. This study used chip color, vibration, and current signal integration for prediction of machining state and cutting tool life. When the cutting tool wears increased, the chip surface color changed in the following way: purpleè purple blueè blue ècyan, or even green and yellow. When the cutting tool was in the accelerating wear phase, the color change was particularly obvious. The Back-Propagation Levenberg–Marquardt (BP-LM) predictive methodology was used to compare the predictive ability of voltage, vibration signal, and chip color. The Mean Absolute Percentage Error (MAPE) for the voltage signal was 12.28%, for the vibration signal it was 11.38%, and for the chip color combined with multi-sensor characteristics it was 7.85%. The MAPE of the chip color was the smallest. Using the General Regression Neural Network (GRNN) methodology, the MAPE for the voltage signal was 10.74%, for the vibration signal 7.96%, and for the chip color combined with multi-sensor characteristics was 6.59%. The MAPE of the chip color was the smallest. Obviously, the chip color combined with multi-sensor signals provided better predictive results than the vibration signal or voltage signal alone. There is currently no research on the usefulness of monitoring chip color for tool life prediction.

The first step in seeing is light absorption by photopigment molecules expressed in the photore-ceptors of the retina. There are two types of photoreceptors in the human retina that are respon-sible for image formation, rods and cones. Except at very low light levels when rods are active, all vision is based on cones. Cones mediate high acuity vision and color vision. Furthermore, they are critically important in the visual feedback mechanism that regulates refractive development of the eye during childhood. The human retina contains a mosaic of three cone types, short-wavelength (S), long-wavelength (L) and middle-wavelength (M); however, the vast major-ity (~94%) are L and M cones. The OPN1LW and OPN1MW genes, located on the X-chromosome at Xq28, encode the protein component of the light-sensitive photopigments. Here we review mechanism by which splicing defects in these genes cause vision disorders.

A typical white-light light-emitting diode (LED) can achieve a sunlight-like spectral profile in the visible spectrum by means of using an optical filter, with an inverted transmission profile to the white LED, fabricated using a deposition coating process. The unfiltered white LED generates white light by mixing light emitted by a blue LED (450 nm) with emission from the yellow phosphorescence excited by the blue light and differs significantly from the characteristics of the full-spectrum natural light. In this study, the spectral characteristics of the filtered LED light can be improved to reach a general color rendering index value (Ra) of 95.6 at the D65.

In the mold machining process, the cutting tool is worn with machining time, thereby affecting the surface accuracy, leading to poor workpiece dimensions, even fracture. At present, many studies have used multiple sensors to detect the machining conditions of cutting tool and workpiece, including indirect measurement method and direct measurement method. The indirect measurement method, which has been studied widely, mainly uses sensors to capture signals for subsequent data analysis; the direct measurement method mainly analyzes the state of cutting shear zone. Due to the cut-in of cutting tool in the machining process, the workpiece is dislocated rapidly, generating considerable amount of heat, which is transferred to the chips, inducing color change on the surface of chips. Many engineers with machining experience often judge the machining state and tool life according to the chips. The engineers' experience is digitized in this study, and indirect measuring sensors are used to predict the tool life, so as to attain the objective for smart manufacturing, the average percentage error of MAPE using single vibration and voltage eigenvalues as input features is 10%, the voltage signal characteristic values and vibration signal characteristic values are combined. Finally, the chip surface chromaticity eigenvalue is combined with signal characteristic value. The average prediction error of BP-LM method is 7.85%, the average prediction error of GRNN method is 6.59%. Therefore, when the eigenvalue of chip surface chromaticity is added to the prediction result, it can enhance the accuracy of cutting tool wear value prediction more effectively than single sensor signal characteristic value.

Sea surface partial pressure of CO2 (pCO2) is a critical parameter in the quantification of air-sea CO2 flux, which plays an important role in calculating the global carbon budget and ocean acidification. In this study, we use chlorophyll-a concentration (Chla), sea surface temperature (SST), absorption due to dissolved and particulate detrital matter (Adg), diffuse attenuation coefficient of downwelling irradiance at 490nm (Kd) and mixed layer depth (MLD) as input data for retrieving the sea surface pCO2 in the North Atlantic based on a remote sensing empirical approach with the Categorical Boosting (CatBoost) algorithm. The results show that the root mean square error (RMSE) is 8.25μatm, the mean bias error (MAE) is 4.92μatm and the coefficient of determination (R2) can reach 0.946 in the validation set, which mean that the CatBoost model makes an improvement compared to other models in the published studies. In the further analysis of the spatial and temporal distribution of the sea surface pCO2 in the North Atlantic, it can be found that the North Atlantic sea surface pCO2 has a clear trend with latitude variations and have strong seasonal changes. Furthermore, the sea surface pCO2 in this area is mainly affected by sea temperature and salinity, and influenced by biological activities in some sub-regions.

Various colors of clothing originating from synthetic dyes are presently causing serious environmental pollution problems, whereas natural dyes extracted from natural indigo plants help reduce the harm to the environment and extend the sustainable use of clothing. This study focuses on the relation between indigo dyeing colors and the environment on the basis of sustainable design. The results reveal that light colors are considered to conform to the sustainable spirit more than dark colors in different indigo colors. In fact, the recyclable light-colored indigo dyeing t-shirt is beneficial in its reuse. Indigo dyeing fabric can be decomposed by a variety of microorganisms; however, the light-colored indigo dyeing takes a short time. Light colored indigo dyeing is more resource-saving when considering dye, water and electricity costs. The results of colors and environmental protection provide scheme references to consumers or industry for clothing collocation of different indigo dyeing colors for a series of blue clothing and carry out the ideal of the sustainability and co-existence between clothing and natural resources.

Fresh Ag nanoparticles (NPs) dispersed on a transparent SiO2 exhibit an intense optical extinction band originating in localized surface plasmon resonance (LSPR) in visible range. The intensity of LSPR band weakened when the Ag NPs was stored in ambient air for two weeks. The rate of the weakening and the LSPR wavelength shift, corresponding to visual chromatic changes, strongly depended on the environment in which Ag NPs were set. The origin of a chromatic change was discussed along with both compositional and morphological changes. In one case, bluish coloring followed by a prompt discoloring was observed for Ag NPs placed near the ventilation fan in our laboratory, resulted from adsorption of large amounts of S and Cl on Ag NP surfaces as well as particle coarsening. Such color changes deduce the presence of significant amounts of S and Cl in the environment. In other case, a remarkably blue-shift of LSPR band was observed for the Ag NPs stored in the desiccator made of stainless steel, originated in the formation of CN and/or HCN compounds and surface roughening. Their color changed from maroon to reddish, suggesting that such molecules were present inside the desiccator.

An 18.8–33.9-GHz, 2.26-mW current-reuse (CR) injection-locked frequency divider (ILFD) for radar sensor applications is presented in this paper. A fourth-order resonator is designed using a transformer with a distributed inductor for wideband operating of the ILFD. The CR core is employed to reduce the power consumption compared to conventional cross-coupled pair ILFDs. The targeted input center frequency is 24 GHz for radar application. The self-oscillated frequency of the proposed CR-ILFD is 14.08 GHz. The input frequency locking range is from 18.8 to 33.8 GHz (57%) at an injection power of 0 dBm without a capacitor bank or varactors. The proposed CR-ILFD consumes 2.26 mW of power from a 1-V supply voltage. The entire die size is 0.75 mm ´ 0.45 mm. This CR-ILFD is implemented in a 65-nm CMOS technology.

We investigated layered titanium nitride (TiN) and aluminum nitride (AlN) for color glasses in Building Integrated Photovoltaic (BIPV) systems. AlN and TiN are among suitable and cost-effective optical materials to be used as thin multilayer films, owing to the significant difference in their refractive index. To fabricate the structure, we used radio frequency magnetron deposition method to achieve the target thickness uniformly. A simple, fast, and cheap fabrication method is achieved by depositing the multilayer films in a single sputtering chamber. It is demonstrated that a multilayer stack that allows light to move from a low refractive index layer to a high refractive index layer or vice-versa can effectively create various distinct color reflections for different film thicknesses and multilayer structures. It is investigated from simulation based on wave optics that, TiN/AlN multilayer offers better color design freedom and cheaper fabrication process as compared to AlN/TiN multilayer films. Blue, green, and yellow color glasses with optical transmittance of more than 80% was achieved by ITO coated glass/TiN/AlN multilayer films. This technology exhibits good potential in commercial BIPV system applications.

Objective Image Quality Assessment (IQA) measures are playing an increasingly important role in the evaluation of digital image quality. New IQA indices are expected to be strongly correlated with subjective observer evaluations expressed by MOS/DMOS scores. One such recently proposed index is the SuperPixel-based SIMilarity (SPSIM) index, which uses superpixel patches instead of the rectangular pixel grid.The authors in this paper have been proposed three modifications of SPSIM index. For this purpose, the color space used by SPSIM was changed and the way SPSIM determines similarity maps was modified using methods derived from the algorithm for computing the MDSI index. The third modification was a combination of the first two. These three new quality indices were used in the assessment process. The experimental results obtained on many color images from five image databases demonstrated the advantages of the proposed SPSIM modifications.