The amorphous Fe77Cu1Si13B9 ribbons were treated with pulsed laser interference heating (PLIH). It was confirmed here that the use of the laser heating process allowed for obtaining two-dimensional crystallised micro-areas, periodically distributed (at a distance of 17µm) on the surface of the amorphous ribbons. The correlation between structural changes (SEM, TEM, HRTEM) and the distribution of magnetic field lines of heated amorphous Fe77Cu1Si13B9 (FeCuSiB) ribbons is presented. Particular attention is paid to structure changes in micro-areas where, by controlling the laser interference heating process, partial crystallisation of amorphous alloys and the formation of clusters or single nanocrystallites (α-Fe(Si)) embedded in an amorphous matrix are given. The addition of copper to the FeSiB alloy promoted inhibition of grain growth. Electron holography of micro-areas confirmed shifts of the magnetic field lines in the areas of nanocrystallites, the presence of which in the structure caused magnetisation of the surrounding amorphous matrix.

This paper presents the results of a study on the nature, pace and directions of socio-economic and spatial changes in the Warsaw Metropolitan Area (WMA) related to the suburbanization processes taking place there. In the course of research, data on municipalities from the Local Data Bank were used, and that made it possible to trace the changes occurring in 2002-2021. The selection of ana-lytical characteristics took into account a wide range of socio-economic diversities of the area related to changes in population, construction activity and housing stock, land use and spatial policy, economic and associated with investment attractiveness. The components of diversification were used to develop the typological classes of municipalities. The final result of the study is the identification of the specificity of suburbanization in the OMW which is reflected in the social, economic and spatial aspects of the functioning of municipalities.

The work presents a mathematical model of a thermogravimetric curve for the growth and simultaneous sublimation of scale on a metal or alloy surface. Reduction of the reaction area as a result of the formation of oxides of alloying elements (for obtaining the basic oxide) is considered for the alloy. For metals, the case where this area is increased as a result of powder metal crushing is also considered. The equations that were obtained are employed to explain the kinetic curves of the mass change of the samples.

Browsing of wild ungulates can have profound effects on the structure and composition of forests. In the Swiss National Park, the density of wild ungulates including red deer (Cervus elaphus), ibex (Capra ibex), and chamois (Rupicapra rupicapra) is exceptionally high due to strict protection and the absence of large predators. We examined count data of larch (Larix decidua), cembra pine (Pinus cembra), spruce (Picea abies), upright mountain pine (Pinus mugo subsp. uncinata), and mountain ash (Sorbus aucuparia) of four sampling years between 1991 and 2021 and modelled how different topographic and location factors affected the probability of browsing on saplings of larch, cembra pine, and spruce. Despite the high density of wild ungulates, the numbers of saplings and young trees increased over the past 30 years. The probability of browsing on saplings was highest for larch at a height of 10 – 40 cm and increased with increasing elevation. In our study area, open grasslands are mainly located above the tree line, which might explain the positive correlation between elevation and the probability of browsing. Other factors like exposition and slope, available food resources and disturbance by humans did not have clear effects on the probability of browsing.

Due to a simple crane limited capacity; there is an urgent need to use high capacity cranes such as tower cranes. However, with regard to their high expense, we have to take into consideration selecting what type of cranes to be utilized which has been discussed by many researchers. In this research, a proposed technique was created to select the suitable type of crane and best place for crane erection, in addition to minimum radius for requested crane in order to minimize cost. To fulfill that target, a computer program is designed to numerate these problems, demonstrating an example explaining how to apply program and the result donated best place.

Based on the dynamic strength variation mechanism of concrete under complex loading conditions, two approaches were devised: numerical testing and CT scanning, guided by the principle of minimizing energy dissipation. A methodology for calculating concrete's failure area and measuring its strength was developed. The analysis delves into the mechanisms behind failure patterns and variations in concrete specimen strength, focusing on crack initiation, development, and the resultant failure surface formed by crack propagation, along with the stress distribution in concrete specimens subjected to diverse loading conditions. Through evaluating the strength and computed failure area of concrete specimens, it is evident that the loading method influences both the strength and failure area of concrete specimens. In general, a larger failure area correlates with a higher measured strength.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

Mangrove forests provide a wide range of goods and services that sustain communities around the world. This paper explores utilization patterns of extractable mangrove resources by communities within the proposed Kenya – Tanzania Transboundary Conservation Area (TBCA). Some 152 household surveys and 12 Nominal Group Technique discussions were carried out. At least 16 direct use products were reported to be extracted from the mangroves, with 90% of households found to use mangrove products. Changing patterns of mangrove use in the areas and accessibility point towards unsustainable utilization and promote illegal activities. Overharvesting of mangrove wood products was reported to be the major threat facing the forests. Patterns of mangrove use in the study site reveal a high level of mangrove-dependence by communities for their livelihood. There is a need to address the problems of open access through capacity building and awareness creation, development and implementation of harvest plans as well as introduction of alternative livelihood options to the communities in the area.

The necessity for precise and current data concerning the dynamics of land cover change in Indonesia is crucial for efforts to reduce natural vegetation cover due to agricultural expansion. The functionality of monitoring systems that incorporate Terra-MODIS is currently compromised by the limited availability of data for the immediate future. This study seeks to assess the potential of VIIRS satellite imagery in developing an early warning system for monitoring vegetation cover change in Indonesia. The Normalized Differential Open Area Index (NDOAI) computed from the 8-day’ VIIRS data was employed to detect changes in vegetation cover based on pixel-by-pixel subtraction in the NDOAI data time series. Evaluating the pixel-level accuracy of change detection is complicated due to the fact that we evaluate a change map at a coarser resolution than the Landsat-based reference map. The results revealed that increasing the threshold percentage is associated with improved accuracy. In change detection, there is often a trade-off between accuracy and sensitivity. A threshold that is too low may result in false positives, while a threshold that is too high may lead to missed changes. This study demonstrates that when a threshold value of less than 20% is applied, Landsat can identify vegetation cover changes at an earlier stage. Conversely, when a threshold value greater than 20% is employed, VIIRS will detect the change 4.5 days earlier than Landsat. Additionally, VIIRS is capable of detecting changes 25.4 days and 54.8 days faster than Landsat, respectively, when using thresholds of 40% and 75%.

The main objective of this work is to investigate the temporal variation of PM10 concentrations within the urban area of Athens during the years 2001-2015. For this purpose, the time series of the particulate matter with aerodynamic diameter less than 10μm (PM10) is recorded for a 15-year period (2001-2015) in two different monitoring stations located in the urban area of Athens. The results show a totally different behavior of PM10 concentrations between the Athens city center and the suburban areas. It seems that in the city center the main sources of PM10 are traffic and heating systems especially during the cold period of the year. Furthermore, in the city center a significant seasonal variation was found with high concentrations during the cold period of the year and lower concentrations during the warm period of the year. Moreover, it was found that during the weekends, there is a decrease in PM10 concentrations probably due to the fact that majority of people do not use their vehicles. Finally, for both locations a significant temporal decreasing trend of the mean annual PM10 concentrations was found which indicates that during the last years, there have been improvements towards a better air quality.

Plant leaf area index (LAI) is a key characteristic affecting field canopy microclimate. In addition to traditional professional measuring instruments, smartphone camera sensors have been used to measure plant LAI. However, when smartphone methods were used to measure conifer forest LAI, very different performances were obtained depending on whether the smartphone was held at the zenith angle or at a 57.5° angle. To validate further the potential of smartphone sensors for measuring conifer LAI and to find the limits of this method, this paper reports the results of a comparison of two smartphone methods with an LAI-2000 instrument. It is shown that both methods can be used to reveal the conifer leaf-growing trajectory. However, the method with the phone oriented vertically upwards always produced better consistency in magnitude with LAI-2000. The bias of the LAI between the smartphone method and the LAI-2000 instrument was explained with regard to four aspects that can affect LAI: gap fraction, leaf projection ratio, sensor field of view (FOV), and viewing zenith angle (VZA). It was concluded that large FOV and large VZA cause the 57.5° method to overestimate the gap fraction and hence underestimate conifer LAI, especially when tree height is greater than 2.0 m. For the vertically upward method, the bias caused by the overestimated gap fraction is compensated for by an underestimated leaf projection ratio.

Myanmar is located in the Indo-Burma biodiversity hotspot, but lacks understanding of the bio-diversity hotspots and protected areas within its borders. Climate change affects the effective-ness of protected areas and the potential distribution range of species. Based on Myanmar's re-gional characteristics, endangered status, and representativeness, this paper selects species and identifies biodiversity hotspots using the MaxEnt model. We studied the biodiversity within the terrestrial protected area network in Myanmar, as well as the potential for cross-boundary range shifts among protected areas under different climate scenarios. Species populations outside My-anmar's protected area network may not be able to find suitable habitats in the future, further exacerbating climate-related extinction risks. Additionally, some protected areas in Myanmar may not be fully utilizing their biodiversity representation potential, and with scientific spatial planning, Myanmar's protected areas could support a large number of species. In the context of continued warming, identifying new protected areas that encompass the future and current climatic niches of protected areas can increase the capacity for sustained biodiversity conservation. We hope that this study provides insights for increasing the effectiveness of Myanmar's protect-ed area network and emphasizes the urgency of coordinated protection of protected areas and biodiversity hotspots.

The research on the impact of excavation of underpass tunnels has already had certain results, but there is a lack of research cases of double-line highway tunnels with oblique angles underpass the existing railway tunnels, especially the method of determining the area of the impact of the dynamic and static loads of the new tunnels and existing trains to be enriched by considering them at the same time. In this paper, based on the tunnel project of the new double-line Shiqian Highway Tunnel with oblique angles underpass the Hurong Railway in Wanshoushan. By constructing a three-dimensional finite element model and simulating the application of static tunnel excavation load, dynamic blasting load and dynamic train operation load of the existing tunnel, the overall displacement of the existing tunnel and the settlement value of the bottom plate of the track surface by the static tunnel excavation load were analyzed. Then, the stresses, vibration speeds and displacements of the tunnel due to the dynamic blasting loads and the dynamic train operation loads were obtained. The results show that: the area of influence of the static loads of the new tunnel excavation on the existing tunnel is divided into three types of perturbations presenting strong, weak and slight; the area affected by the blasting dynamic load of new tunnel excavation is a circular domain with the datum point in the tunnel section as the center; the area affected by the dynamic load of train operation in the existing tunnel is an ellipse with the center of the track surface of the existing tunnel as the datum; there is an anomalous shape in the area affected by the blasting dynamic load of new tunnel excavation and the area affected by the dynamic load of train operation in the existing tunnel.

Soil water content (SWC) and soil organic carbon (SOC) are two important factors to consider when revegetation in degraded land of arid and semiarid areas. Knowing the response of SWC and SOC to vegetation restoration as well as their coupling interaction is important for sustainability of vegetation restoration. In this study, three common plantations of the same recovery years were selected on China’s Loess Plateau, which included Pinus sylvestris, Pinus tabuliformis and Populus simonii, to evaluate the response of SWC and SOC to vegetation restoration as well as their interactions, and then revealed the influencing factors of SWC and SOC variations. Results showed that compared to the grassland, three plantations all exacerbated the deficit of deep soil water, but Populus simonii increased the SOC, while the rest all decreased the SOC. And tradeoff of Populus simonii had the lowest root mean squared error (RMSD). Therefore, Populus simonii was identified as representing a suitable revegetation technique for this region. There was strong interaction between SWC and SOC for shallow soil layers. Land use type (LUT) has an important effect on deep SOC variations, while SOC and soil texture for deep SWC variations. The results were helpful to the sustainable development of artificial forests in this region as well as other similar arid and semiarid areas.

Considering characteristics of high river density, special underlying surface in plain river network region, and municipal drainage system function, river network drainage unit model is proposed, which is defined as a region surrounded by main river or embankment. Flood storage variety and control projects regulation of small rivers in each unit is simulated. With drainage catchment as an object, according to its drainage capacity, simplified municipal drainage model was developed. Coupling river network drainage unit model, simplified municipal drainage model and 2D flood routing model, urban flood analysis model for plain tidal river network region was developed, which could be applied to analyzing flood from upstream river, storm surge and local rainfall. Demonstration research was carried out in Puxi flood protected area in Shanghai.

Introduction: Oral health knowledge, beliefs and attitudes of parents have a direct influence on their child’s oral health maintenance, dietary habits and encourage healthy behaviors. The aim of this study was to assess the knowledge, and attitude of parents with regards to the oral health practice of their children and its associated factors. Methods: A self -administered structured questionnaire was administered to parents or guardians of learners aged 5 to 12 years at a low socio-economic rural primary school in the uGu district, KwaZulu Natal, South Africa to collect demographic variables, knowledge of dental health, use of toothbrush, use of toothpaste, dietary practices and dental visits; practice with respect to dental care and attitudes towards oral health. The questionnaire was translated from English to IsiZulu was used. Bivariate and multivariate logistic regressions were used to assess the association between parent’s sociodemographic factors with their oral health knowledge and practice scores. Results: One hundred and forty four completed survey instruments were received with an eighty percent (118) representation of mothers. Ninety five percent of the parents (136) had a positive attitude towards oral health with 86% (124) of the children brushed their tongue and 89% (128) of the children brushed their teeth happily. The mean knowledge score was 70% with a median of 72%. Children were significantly more likely to brush their tongues (AOR: 3.20 95% CI: 1.06-9.66) and were more likely to be happier when brushing their teeth (AOR: 4.65 95% CI: 1.41-15.38) when the caregivers were their mothers, and when parents had an above average knowledge score (AOR: 1.86 95% CI: 0.72-4.85) and had positive attitudes (AOR: 3.20 95%CI: 0.46-22.00). Conclusion: To reduce the gaps in knowledge, oral health promotion should be integrated into all point of care contact with parents at health facilities, increased community awareness and advertising campaigns as well as a more focused school health oral program that addresses primary prevention, screening and appropriate referrals to health facilities

Water quality assessment in pastoral of Tibetan Plateau, which is water sources for about 40% of world's population and the runoff-yield area of Yellow rivers, is very important. In this paper, Xiahe county which belongs to Tibetan Plateau pastoral was investigated. Six parameters(via, chloride, COD, ammonia nitrogen, nitrate, fluoride, sulfate) were selected to assess the water quality and health degree by using fuzzy comprehensive evaluation methods. The hydrochemical type in surface water was of HCO3--Mg2+-Ca2+ type. The cations and anions in surface water were mainly from weathering and dissolution of carbonate rock. Results showed that the water quality in all 69 sampling sites was all of class Ⅰ. The integrated health degree reached more than 0.85 and the health rate were 100%. Although ammonia nitrogen was regarded as the main contamination factor, but it had a little effect on the entire body of water. Overall, the surface water qualities of most samples in Xiahe County was good condition.

This study explores optimizing Synthetic Aperture Radar (SAR) satellite constellation scheduling for multi-imaging missions in densely targeted areas using an in-house developed Modified Dynamic Programming (MDP) algorithm. By employing Mixed-Integer Linear Programming (MILP) to define the mission planning problem, the research aims to maximize observation of high-value targets within restricted planning horizons. Numerical simulations, covering a wide range of target numbers and satellite configurations, reveal the MDP algorithm’s superior mission allocation efficiency, enhanced success rates, and reduced revisit times, compared to the Greedy algorithm. The findings underscore the MDP algorithm’s improved operational efficiency and planning robustness for complex imaging tasks, demonstrating significant advancements over traditional approaches.

Distracted driving is a major cause of road traffic crashes in Yaoundé. Partly due to scarcity of enforcement, lack of evidence and investigation of distraction safety performance indicator (SPI), hindering evidence-based intervention. This study aimed to address this evidence gap by evaluating the distraction SPI using proven methodology. Data on distracted driving (handheld mobile device; interaction; eating/smoking/drinking) were collected from roadside observation on 36 randomly selected road sections carefully spread to cover the city. SPI were computed and weighted with traffic volume to ensure representativeness of values. A total of 41,004 drivers were observed (38,248 in car; 1,116 in van; 977 in truck; 663 in bus). The prevalence of distracted driving in Yaoundé is 13.69% for the three distractions type combined. The prevalence is 7.84% for interaction, 4.89% for handled mobile device usage and 0.96% for eating/smoking/drinking. Leveraging these insights, a seven year (2024 - 2030) fighting strategy aiming at halving the prevalence was developed. The strategy contains intervention including on legislation/enforcement, which have been proven effective. This study, pioneer in Yaoundé, provide stakeholders with evidence of the issue and measures to implement and can also serve when developing road safety strategy.Future research should consider investigation at national level.

The mixing of terrestrial groundwater and seawater creates dynamic reaction zones in intertidal areas, where land-derived Fe(II) is oxidized to Fe(III) and then precipitates as Fe hydroxides at groundwater-seawater interface. These hydrogeochemical processes contribute to the formation of iron curtains beneath soil surface, which in turn influences the evolution of coastal aquifers. This paper provides a comprehensive review of physical and geochemical processes at field scale in coastal areas, explores the impact of mineral precipitation on pore structure at pore scale, and synthesizes reactive transport modeling (RTM) approaches for illustrating continuum-scale soil physio-chemical parameters during the evolution of porous media. Upon this review, knowledge gaps and research needs are identified. Additionally, challenges and opportunities are presented. Therefore, the incorporation of observational data into a comprehensive physico-mathematical model becomes imperative for capturing the pore-scale processes in porous media and their influence on groundwater flow and solute transport at large scales. Furthermore, a synergistic approach integrating pore-scale modeling and non-invasive imaging can provide detailed insights into intricate fluid-pore-solid interactions for future studies, as well as facilitate the development of regional engineering-scale models and physio-chemical coupled models with diverse applications in submarine science and engineering.

The Covid-19 pandemic has rapidly evolved in December 2019 and to prevent its spread, effective vaccines has been produced and made available to the population. Despite their availability so far in Cameroon, the vaccination coverage remains low. This study aimed at describing the epidemiology of the acceptance of vaccines against Covid-19 in some urban and rural areas of Cameroon. A cross-sectional, descriptive and analytical survey was conducted from March 2021 to August 2021 targeting unvaccinated individuals from urban and rural area. After getting appropriate administrative authorizations and an ethical clearance from the Institutional Review Board (or Ethics Committee) of Douala University (N° 3070CEI-Udo/05/2022/M), a cluster sampling at many degrees was performed and a language adapted questionnaire was filled by each consenting participant. Data were analyzed using Epi info version 7.2.2.6 software and for P-values ˂ 0.05, the difference was considered as statistically significant. Out of 1053 individuals, 58.02% (611/1053) participants were residing in urban and 41.98% (442/1053) in rural areas. Good knowledge relative to Covid-19 was significantly higher in urban areas as compared to rural areas (97.55%vs.85.07, P<0.000). The proportion of respondents who intended to accept the anti Covid-19 vaccine was significantly higher in urban areas than rural areas (42.55%vs.33.26, p=0.0047). Conversely, the proportion of anti Covid-19 reluctant respondents thinking that the vaccine can induce a disease was significantly higher in rural areas than urban areas (54 (35.07 vs 8.84, P<0.0001). The significant determinants of anti-COVID-19 acceptance were the level of education (p=0.0001) and profession in the rural areas (p=<0.0001), and only the profession (p=0.0046) in the urban areas. This study globally shows that anti-COVID-19 vaccination remains a major challenge in urban as well as rural area in Cameroon. We should keep sensitizing and educate population about vaccine importance in preventing the COVID-19 spread.

The study conducted in this paper is focused on a predominantly residential area of the City of Ljubljana – Koseze, which is characterized by generally favorable (bio)climatic conditions. Nonetheless, thermal satellite imaging showed that residential neighborhoods within the Koseze district display unexpected variations in summer temperatures. This observation called into question the benefits of existing bioclimatic features and indicated the need to investigate and compare two neighborhoods with similar urban parameters, with the aim to identify morphological differential characteristics impacting urban heat island (UHI) intensity. By applying the study methodology based on a literature review, surveys of key precedents, detailed mapping in two Koseze locations, in situ measurements, observations and recordings, thermal imaging and the analyses of statistical data, as well as by defining the four main categories of morphological urban parameters – structure, cover, fabric and metabolism, it was concluded that both neighborhoods have common morphological elements mitigating the UHI effect. Additionally, it was found that the neighborhood with higher UHI intensity has several less favorable features, such as busier roads, larger surface of parking corridors, and the existence of underground parking space. The traffic as an element of urban morphology hence represents the main cause of differences among UHI levels in the two Koseze neighborhoods.

The calculation of moments of area is one of the most fundamental aspects of engineering mechanics for calculating the properties of beams or for the determination of invariants in different kind of geometries. While a variety of shapes such as circles, rectangles, ellipses or their combinations can be described symbolically, such symbolic expressions are missing for freeform cross-sections. In particular, periodic B-spline cross-sections are suitable for an alternative beam cross-section, e.g. for the representation of topology optimization results. In this work, therefore, a symbolic description of the moments of area of various parametric representations of such B-splines is computed. The expressions found are then compared with alternative computational methods and checked for validity. The resulting equations show a simple way for fast conceptual computation of such moments of area of periodic B-splines.

Leaf mass per area (LMA) is a key structural parameter that reflects the functional traits of leaves and plays a vital role in simulating the material and energy cycle of plant ecosystems. In this study, vertical whorl-by-whorl sampling of LMA was conducted in a young Larix principis-rupprechtii plantation during the growing season at the Saihanba Forest Farm. The vertical and seasonal variations in LMA were analysed. Subsequently, a predictive model of LMA was constructed. The results revealed that the LMA varied significantly between different crown whorls and growing periods. In the vertical direction of the crown, the LMA decreased with increasing crown depth, but the range of LMA values from the tree top to the bottom was, on average, 30.4 g/m2, which was approximately 2.5 times greater in the fully expanded phase than in the early leaf-expanding phase. The LMA exhibited an allometric growth trend that increased during the leaf-expanding phase and then tended to stabilize. However, the range of LMA values throughout the growing period was, on average, 40.4 g/m2. Among the univariate models, the leaf dry matter content (LDMC) performed well (Ra2=0.45, RMSE=13.48 g/m2) in estimating the LMA. The correlation between LMA and LDMC significantly differed at different growth stages and at different vertical crown whorls. The dynamic predictive model of LMA constructed with the RDINC and DOY as independent variables was reliable in both the assessments (Ra2=0.68, RMSE=10.25 g/m2) and the validation (MAE=8.05 g/m2, FI=0.682). Dynamic simulations of crown LMA provide a basis for elucidating the mechanism of crown development and laying the foundation for the construction of an ecological process model..

In the Neighborhood Area Network (NAN), the Advanced Metering Infrastructure (AMI) enables a bidirectional connection between the Smart Meter (SM) and the Data Concentrator (DC). Sensors, such as smart meter node or Radio Frequency transceiver, play a crucial role in collecting and transmitting data from meters to central unit for advanced monitoring, management, and analysis of energy consumption. Wired and wireless communication technologies can be used to implement the AMI-NAN. This paper delves into a novel approach for optimizing the choice of communication medium, Radio Frequency (RF) or Power-Line Communication (PLC), between the SM and DC in the context of AMI-NAN. The authors methodically select the specific technologies, RF and NB-PLC (Narrow Band Power-Line Communication), and meticulously characterize their attributes. Then, a comparative analysis spanning rural, urban, and industrial settings is conducted to evaluate the proposed method. The overall reliability performance of the AMI-NAN system requires a Packet Error Rate (PER) lower than 10%. To this end, a comprehensive methodology is introduced to assess and enhance the reliability of NB-PLC and RF for AMI-NAN applications. Simulation results demonstrate that wireless communication is the optimal choice for the rural scenario, especially for Signal to Noise Ratio (SNR) lower than 25 dB. However, in urban environments characterized by higher SNR values and moderately dense networks, NB-PLC gains prominence. In denser networks, it outperforms wireless communication, exhibiting a remarkable 10 dB gain for a bit error rate (BER) of 10-3. Moreover, in industrial zones characterized by intricate network topologies and non-linear loads, the powerline channel emerges as the optimal choice for data transmission, affording a gain surpassing 20 dB.

In Taiwan, mountainous areas account for approximately two-thirds of the total area. The steep terrain and concentrated rainfall during typhoons cause landslides, which pose a considerable threat to mountain settlements. Therefore, models for analyzing rainfall-induced landslide hazards are urgently required to ensure adequate land use in mountainous areas. In this study, focusing on Pingtung County in southern Taiwan, we developed a landslide hazard index (IRL) to land use. Using FORMOSA-2 and SPOT-5 satellite images, data were collected before and after four typhoons (one in 2009 and three in 2013). The ArcGIS random tree classifier was used for interpreting satellite images to explore surface changes and disasters, which were used to analyze slope disturbances. The product of the maximum 3-h rolling rainfall intensity and effective accumulated rainfall was used as a rainfall trigger index (IRT). Considering environmental and slope disturbance factors, an index of slope environmental strength potential (ISESP) was developed through logistic regression (LR). Landslide hazard to land use was estimated using IRT and ISESP. The average coefficient of agreement (Kappa) was approximately 0.71 (medium to high accuracy); the overall accuracy of slope environmental strength potential analysis was approximately 80.4%. At a constant ISESP, IRT increased with the increasing hazard potential of rainfall-induced landslides. Furthermore, IRT and ISESP were positively correlated with landslide occurrence. When large ISESP values occur (e.g., fragile environment and high land development intensity), small IRT values may induce landslides.

This mathematical observation deals with the development of a completely new expression [(S/4D) × √ {(S₁²-D²)(D²-D₁²)}] to calculate the area of a trapezoid system. Because of the difficulties of the previous methods to find out the area of a trapezoid (AOT), the proposed formula has thus indicated the best way to determine the AOT more precisely and easily beyond limitation, successfully. It is obvious that the derived formula is helpful to determine AOT more easily and precisely rather than existing method. And this developed theorem for the trapezoid system is observed for the first time.

To avoid loss of information and incorrect ranking, this paper proposes a method for ranking generalized fuzzy numbers, which guarantees both horizontal and vertical values are important parameters affecting the final ranking score. In this method, the normalized height coefficient is introduced to evaluate the influence of the height of fuzzy numbers on the final ranking score. The higher the normalized height coefficient of a fuzzy number is, the higher its ranking. The left area and the right area are presented to calculate the impact of vertical value on the final ranking score. The left area is considered the benefit area. The right area is considered the cost area. The fuzzy number is preferred if the benefit area is larger and the cost area is smaller. The proposed method can be employed to rank both normal and non-normal fuzzy numbers without normalization or height minimization. Numerical examples and comparison with other methods highlight the feasibility and robustness of the proposed method, which can overcome the shortcomings of some existing methods and can support decision-makers to select the best alternative.

The economic activities in the romanian rural areas have started to know new horizons with Romania's accession to the European Community. The rural society was and is focused on the level of entrepreneurial behavior strictly on agriculture, with all its derivatives. At present there is a variety of sectors of activity that are found in the rural society, which are waiting to know new dimensions. The higher the number of entrepreneurs, the more job vacancies will be created across different fields of activity. In these circumstances, the number of jobs will increase, and the society in the romanian rural area can enjoy a diversity of the population determined by the various professions of people, but also by the new dimension offered by the entrepreneurial area. This way, it will be done later the repopulation of the Romanian countryside, a national interest issue, after the great majority of the population went to work in the countries of the European Community, having to be forced by the poverty of the romanian rural area, determined by the lack of jobs to ensure a decent standard of living.

The Australian tropical montane cloud forest (TMCF) is home to approximately 18 percent of the nation’s total vascular plant species. Over the past century, human activity and industrial development have caused global climate changes, posing a severe and irreversible danger to the entire land-based ecosystem, and WTWHA is no exception. The current average annual temperature of WTWHA in FNQ is 24 °C. However, in the coming years (by 2030), the average annual temperature increase is estimated to be between 0.5 and 1.4 °C compared to the climate observed between 1986 and 2005. Looking further ahead to 2070, the anticipated temperature rise is projected to be between 1.0 and 3.2 °C, with the exact range depending on future emissions. We identified 84 plant species endemic to the WTWHA in FNQ, which are already experiencing climate change threats. Few of these plants are used in herbal medicines. This study comprehensively reviewed metabolomics studies conducted on these 84 plant species until now toward understanding their physiological and metabolomics responses to global climate change. This review also discusses: i) recent developments in plant metabolomics studies that can be applied to study and understand the interactions of wet tropical plants with climatic stress, ii) medicinal plants and isolated phytochemicals with structural diversity, and iii) reported biological activities of crude extracts and isolated compounds.

This study aims to examine households' perceptions of the socio-cultural, economic, and environmental impacts of ecotourism in the protected area, focusing on Simien Mountain National Park, North west Ethiopia. Using a mixed research approach with a sequential explanatory design, we collected data through a single-round cross-sectional survey, interviews, focus groups, discussions, and secondary sources of information. Three districts were selected using a multi-stage sampling method, and 397 respondents were surveyed. We analyzed the quantitative data using percentages, averages, t-tests, ANOVA, and regression models, and examined the qualitative data using thematic analysis. Our findings suggest that households living in the park generally perceived the social, economic, and environmental impacts of ecotourism as favorable. However, the study also revealed that the benefits of tourism are not being fully utilized, indicating the potential for further development. We found significant differences in how people perceived ecotourism based on their gender, education, and residence location. Specifically, men and respondents with higher levels of education were more likely to perceive ecotourism positively. The logistic regression model revealed a statistically significant direct cause-and-effect relationship between three demographic factors of household respondents' participation in ecotourism (dependent variable) and gender (B = 1.85, p = 0.023), educational attainment (B = 0.23, p = 0.003), and location (B = 0.42, p = 0.041). In light of these findings, the authors recommend that the local government and the Ethiopian Wildlife Conservation Agency should develop sustainable plans for tourism that will benefit nearby communities and improve living conditions in the park.

It has been widely described that chronic intake of fructose causes metabolic alterations which can be associated with brain function impairment. In this study, we evaluated the effects of fructose intake on the sleep-wake cycle, locomotion and neurochemical parameters in Wistar rats. The experimental group was fed with 10% fructose in drinking water for five weeks. After treatment, metabolic indicators were quantified in blood. Electroencephalographic recordings were used to evaluate the sleep architecture and the spectral power of frequency bands. Likewise, the locomotor activity and the concentrations of orexin A and monoamines were estimated. Our results show that fructose diet significantly increased the blood levels of glucose, cholesterol, and triglycerides. Fructose modified the sleep-wake cycle of rats increasing the waking duration and conversely decreasing the non-rapid eye movement sleep. Furthermore, these effects were accompanied by increases of the spectral power at different frequency bands. Chronic consumption of fructose caused a slight increase in the locomotor activity as well as an increase of orexin-A and dopamine levels in the hypothalamus and brainstem. Specifically, immunoreactivity for orexin-A was increased in the ventral tegmental area after the intake of fructose. Our study suggests that fructose induces metabolic changes and stimulates the activity of orexinergic and dopaminergic neurons which may be responsible for alterations of the sleep-wake cycle.

Livestock is an integral part of agriculture which significantly contributes to the economic and socio-economic development. Based on its potential in natural resources and human resources, East Kalimantan Province has opportunity to become a beef cattle development area. The development of a corporate-based beef cattle breeding area is an approach which taken toward industrial and business-oriented beef cattle breeding. The concept of breeder corporation will create new strengths such as strengths in human resources, capital, and banking in business development, which can more open the opportunities for the success and growth of the breeder's business. The development of a corporate-based beef cattle breeding area provides opportunities, including: 1) improving the competitiveness and added value of the region and beef cattle commodities in order to support national sustainable food security; 2) strengthening the livestock business system in one area management in a holistic manner; and 3) strengthening breeders institutions in accessing information, technology, public facilities and infrastructure, capital, processing and marketing, so that the concept is expected to be applied in East Kalimantan Province.

The paper comes from the need to search for criteria useful for the valorization of heritage towns, located in rural and/or inland areas of Italy, now affected to depression and depopulation process. To this end, the authors point out how territorial identity can constitute the theoretical foundation to influence the development policies and, in particular, the tourism development for sustainability process It was therefore decided to interview a number of stakeholders who could contribute with their professionalism and expertise to identify possible paths and processes for the enhancement of these areas for tourism development. The methodology was based on be to be interviews with open questions, which allowed to identify a SWOT analysis, offering a guideline for a correct governance of these rural areas for their tourist enhancement, in terms of sustainability of development and tourist attractiveness. The study is an observatory that will monitor the implementation of sustainable tourism enhancement of the borghi, heritage town

Leptospirosis is an important zoonotic disease that is transmitted worldwide through infected small mammals such as rodents. In Malaysia, there is paucity of information on the animal reservoirs that are responsible for leptospirosis transmission, with only few studies focusing on leptospirosis risk in recreational areas. Therefore, in this study, we characterized the species composition and the prevalence of pathogenic Leptospira spp. in non-volant small mammals of Hutan Lipur Sekayu, Terengganu. We performed ten trapping sessions totaling 3,000 trapping efforts between September 2019 and October 2020. Kidney samples from captured individuals were extracted for the PCR detection of pathogenic Leptospira spp. Overall, we captured 45 individuals from 8 species (1.56% successful trapping effort), with 9 individuals testing positive for pathogenic Leptospira, that is 20% (n = 9/45) prevalence rate. Rattus tiomanicus (n = 22) was the most dominant captured species and was found to harbour the highest positive individual with pathogenic Leptospira (44.4%, n = 4/9). Despite the low successful trapping effort in this study, the result shows that the non-volant small mammals of Hutan Lipur Sekayu are capable of maintaining and transmitting pathogenic Leptospira, thus making this recreational area a potential infestation ground for leptospirosis.

This study presents a novel approach for quantifying the dynamics of monthly hydraulic geometry relationships in the Jingjiang reach of the Yangtze River by integrating leaf area index (LAI) data as an indicator of riparian vegetation. A comprehensive system of ordinary differential equations (ODEs) couples traditional power-law hydraulic geometry equations with LAI, capturing the influence of erosion control on channel morphology. The periodic delayed response theory and automatic differentiation techniques are employed to enhance the modeling framework's capabilities. Calibration and verification demonstrate the models' effectiveness in capturing overall trends in discharge, width, and depth dynamics, outperforming traditional constant-parameter approaches. However, model predictive abilities are limited under extreme climate conditions due to training on normal climate data. Key assumptions, including the periodic delayed response theory's neglect of peak discharges, simplified representation of artificial cut-offs, and reliance on remotely sensed data with limited local validation, introduce uncertainties. The proposed modeling framework shows potential for broader application to other river systems with appropriate adjustments. Future research could incorporate additional environmental factors, integrate models across scales, couple with advanced simulation techniques, and expand stability assessments beyond the riverbed index. By addressing related challenges, this integrated approach lays a foundation for enhancing understanding of river morphodynamics and channel stability.

This study examined the accumulations and transfer of manganese into 11 wild plants from the mining soils of Gümüşköy, Turkey. The greatest silver resource in Turkey is found in the Gümüsköy mining area, which is situated roughly 25 kilometers to the west of Kütahya. ICP-MS was used to determine the Mn contents in soil and plant samples that were taken from the field. In the research area, the average Mn concentrations in the soil, roots, and shoots of wild plants were 1872, 1076, and 1048 ppm, respectively. Based on their ECS and ECR values, the plants were divided into three groups: the best plants, good plants, and candidate plants. While Glaucium flavum, Carduus nutans, Phlomis sp., Onosma sp., and Verbascum thapsus were selected as the best plants, Cynoglossum officinale, Anchusa arvensis were determined as good plants, and the others (Alyssum saxatile, Centaurea cyanus, Silene compacta, Isatis were determined as candidate plants. According to the current study, all of the best and good plants in the study region had a very high ability to remove Mn. As a result, these plants can be helpful in studies involving phytoremediation or remediation of Mn-polluted soil.

This paper presents an in-depth study of the stress wave behavior propagating in a Rayleigh–Love rod with a sudden cross-sectional area change. The analytical solutions of stress waves are derived for the reflection and transmission propagation behavior at the interface of the cross-sectional area change in the rod, considering inertia and Poisson’s effects. Examples solved by the finite element method are provided to verify the correctness of the analytical results. In addition to the forward analysis of Rayleigh–Love wave propagation in rods impacted by a striker rod, a nondestructive testing method is proposed to conduct the defect assessment in the rod type of the structure component with a sudden cross-sectional area change within a cover medium by using the measured signals at the measurable zone of the rod to be inspected.

Rural areas are not only faced with the problems of rural depopulation but also with the problem of water supply and water quality which is a basic necessity of life. In light of this, this paper assesses the rural water supply situation and the bacteriological quality of different water sources in the Obokun Local Government Area of Osun State, Nigeria. The safety of the water sources for human consumption and possible occurrence of the water borne diseases in the study area were determined. The study employed descriptive and analytical methods of data analysis to achieve the objectives of the inquiry. Findings showed that the study area suffered from inadequate water supply and poor locations of the sources of water: The study also revealed that the microbiological quality of the water sources used was unsafe, poor and not acceptable for human consumption. In addition, many man- days-hours were wasted in search of water. It is therefore recommended that the government should make the rural water supply and the maintenance of water quality a priority in its policy formulation.

This paper evaluated the quality and suitability of surface water in the Vaalharts area, South Africa, for human consumption, drinking, and irrigation purposes. Water quality constituents include water pH, EC, TDS, HCO3-, Cl-, SO4, Mg, Ca, k, Na, NO3, F, Fe, PO4, As, Al, Mn, Cr, Cu, Zn, B, Cd, Hg, Pb, N, Sb, Se, and the biological parameter included E. coli along surface waters as well as canals and dams. Sodium Adsorption Ratio, Sodium Percentage, Permeability Index, Residual Sodium Carbonate, Kelley’s Ratio, Magnesium Hazard, and Potential salinity irrigation water parameters indicated that the majority of the water samples are suitable for irrigation. The water quality index values showed that the majority of the samples are unsuitable for drinking but suitable for irrigation and industrial uses. E. coli in the surface water samples in the study area show unsafe water quality with high and very high risk for human health. Based on the classifying criterion of the Heavy Metal Pollution Index and Heavy Metal Evaluation Index, all the water samples are above the critical limit, therefore, unsuitable for human consumption. The carcinogenic risk (CR) concentrations of As, Cr and Cd were above the target risk.

Mixing layer height (MLH) is a crucial parameter for air quality modelling that is still not routinely measured. Common methods for MLH determination use atmospheric profiles recorded by radiosonde but they suffer from course temporal resolution since balloon launching is only twice a day. Recently cheap ceilometers are gaining popularity in the retrieval of MLH diurnal evolution based on aerosol profiles. This study presents a comparison of a proprietary (Jenoptik) and a free available (STRAT) algorithms to retrieve MLH diurnal cycle. The comparison is accomplished in summer season over urban area and radiosonde data is used to estimate MLHs according to parcel, lapse rate, and Richardson methods (the last algorithm is used as a reference in the study) in addition. It was found that STRAT and Jenoptik give lower MLH than radiosonde with an underestimation of about 150m and 650m respectively. Additionally, STRAT showed reasonable performance in tracking of MLH diurnal evolution. Daily MLH maximum of about 2000m was found in the late afternoon (18-19 LT). In contrast, Jenoptik algorithm showed more weaknesses, mainly attributed to its real-time operation and independent processing of a single profile. At night and during morning transition period, both lidar-based methods showed difficulties as MLH was often in the ceilometer’s incomplete overlapping zone so residual or advected aerosol layers aloft were misleadingly reported as mixing layer (ML).

The attributes of electroplating as a low-cost, simple, scalable and manufacturable semiconductor deposition technique for the fabrication of large-area and nanotechnology-based device applications are discussed. These strengths of electrodeposition are buttressed experimentally using techniques such as X-ray diffraction, Ultraviolet-visible spectroscopy, Scanning electron microscopy, Atomic force microscopy, Energy-dispersive X-ray spectroscopy and photoelectrochemical cell studies. Based on the structural, morphological, compositional optical, and electronic properties evaluated results, it is evident that electroplating possesses the capabilities of producing high-quality semiconductors usable in producing excellent devices. In this paper, we will describe the progress of electroplating technique mainly for the deposition of semiconductor thin film materials, their treatment processes and fabrication of solar cells.

Coal mining has caused a significant loss of nitrogen content of soil in mining areas. This article studies the effects of organic fertilizer, inorganic fertilizer, and combined application of Pseudomonas fluorescens with the ability of nitrogen fixation on soil nitrogen accumulation and composition in the reclamation area of Tunlan Coal Mine from 2016 to 2022 under the condition of equal nitrogen application, providing scientific basis for microbial fertilization and rapid increase of nitrogen content in the reclaimed soil of mining areas. The results showed that as the reclamation time increased, the nitrogen content and its composition structure of the soil treated with fertilization rapidly evolved towards normal farmland soil. The soil nitrogen content increased the fastest in the treatment of Pseudomonas fluorescens + organic fertilizer (MB), compared with inorganic fertilizer (CF), organic fertilizer (M), and Pseudomonas fluorescens + inorganic fertilizer (CFB) treatments, the treatment of Pseudomonas fluorescens + organic fertilizer (MB) can bring the total nitrogen (TN) content of the soil to normal farmland soil levels 1-3 years earlier. The comprehensive scores of Pseudomonas fluorescens + organic fertilizer (MB) and Pseudomonas fluorescens + inorganic fertilizer (CFB) on the two principal components were increased 1.58 and 0.79 than those of organic fertilizer (M) and inorganic fertilizer (CF) treatments, respectively. This further indicates that the combination of Pseudomonas fluorescens and organic fertilizer has a better effect on improving soil nitrogen accumulation than the combination of Pseudomonas fluorescens and inorganic fertilizer. At the same time, the application of Pseudomonas fluorescens will increase the content of unknown nitrogen (UN) in acid-hydrolysable nitrogen (AHN), and decrease the content of amino acid nitrogen (AAN) and ammonia nitrogen (AN), relatively. However, there was no significant effect on the content of ammonium nitrogen (NH4+-N) and nitrate nitrogen (NO3--N) in soil inorganic nitrogen (SMN). When combined with inorganic fertilizer, the contribution of soil mineralized nitrogen (SMN) to total nitrogen (TN) increased by 14.78%, while when combined with organic fertilizer, the contribution of acid-hydrolysable nitrogen (AHN) to total nitrogen (TN) increased by 44.77%. In summary, the use of Pseudomonas fluorescens is beneficial for nitrogen recovery in the reclaimed soil of coal mining areas. The optimal fertilization method under the experimental conditions is the combination of Pseudomonas fluorescens and organic fertilizer.

Cardiovascular diseases (CVD´s) continue as the primary cause of death worldwide. During the past couple of years, and with the surge of the COVID-19 pandemic, deaths linked to CVD´s were -slightly overshadowed by those deaths related to COVID-19, albeit during the highest peaks of the pandemic. The present study derived form understanding the correlation between both diseases, from the standpoint of patients already diagnosed with CVD´s (n = 41883) and what comorbidities had the highest influence on overall patient death (n = 3637). Obesity, hypertension, and diabetes are all linked to worsening the outcome of COVID-19 positive patients, hence they were considered when looking at the overview of all CVD positive patients. Our finding showed that 1697 deaths were related to diabetes (p < 0.001), 987 deaths were related to obesity (p < 0.001), and lastly 2499 deaths were attributed to hypertension (p < 0.001) individually. Using logistic regression modeling, we found diabetes (OR: 1.744, p < 0.001) and hypertension (OR: 2.179, p < 0.001) had a high impact on patient deaths. Hence, having a CVD diagnosis, with hypertension and/or diabetes seems to increase the likely-hood of complication leading to death in COVID-19 positive patients.

Demographic and socio-economic developments couple with other requirements to satisfy human needs result in rapid urban expansion sometimes with increasing rate of surface extent greater than the rate of growth of population, that result in continuous sealing of ground surface thereby affecting ecosystem services. This study applied remote sensing toward achieving the progress of SDGs and stage to determine the ratio of the rate of land consumption to the rate of population growth of Gombe metropolis. QGIS 2.18 was used for the image processing and classification analysis for the key Landsat ETM+ (Enhanced Thematic Mapper), Impervious Surface Indices and population data to inform on the urban trend and LCR/PGR for the periods 2000-2005, 2005-2010, and 2010-2015. The result appears that the LCR/PGR for the periods of study show split trends. During 2000-2005 the result shows that the study area expanded outward with LCR/PGR of 1.2. The result also indicate that during 2005-2010, the study area densified with little expansion with the LCR/PGR of 0.8. The result further reveals that during 2010-2015 the LCR/PGR reached 1.8. Pointing that the study area expanded outward with the rate of ground sealing getting high.

Ambitious biodiversity goals to protect 30% or more of the Earth’s surface by 2030 (30x30) require strategic near-term targets. To define areas that must be protected to prevent the most likely and imminent extinctions, we propose Conservation Imperatives—16,825 unprotected sites harboring rare and threatened species and spanning ~164 Mha of the terrestrial realm. We estimate that protecting the Conservation Imperatives would cost approximately US$169 billion [90% probability: $146 — $228 billion]. Globally, 38% of the 16,825 sites are either adjacent to or within 2.5 km of an existing protected area, potentially reducing land acquisition and management costs. These sites should be prioritized for conservation action over the next five years as part of a broader strategy to expand the global protected area network. The expansion of global protected areas between 2018–2023 incorporated only 7% of sites harboring range-limited and threatened species, highlighting a renewed urgency to conserve these habitats. Permanently protecting only 0.74% of land found in the tropics, where Conservation Imperatives are concentrated, could prevent the majority of predicted near-term extinctions once adequately resourced. We estimate this cost to be US$29 billion to US$46 billion per year over the next five years. Multiple approaches will be required to meet long-term protection goals: providing rights and title to Indigenous Peoples and Local Communities (IPLCs) conserving traditional lands, government designation of new protected areas on federal and state lands, and land purchase or long-term leasing of privately held lands.

Background: Coronary artery disease (CAD) remains a significant global health concern, being one of the most important contributors to morbidity and mortality worldwide. Accurate assessment of coronary lesions is crucial for guiding appropriate interventions and optimizing patient outcomes. Patients with acute myocardial infarction represent a population which is rarely selected in studies of intracoronary hemodynamics. Fractional Flow Reserve (FFR) has emerged as a valuable physiological index for evaluating the functional significance of coronary lesions, although the data of intravascular hemodynamic evaluation in patients with acute myocardial infarction is scarce [1-3]. In recent years, advancements in intravascular imaging techniques, such as Optical Coherence Tomography (OCT), have provided detailed insights into coronary anatomy both in acute or elective settings. [4-7]. Methods: This article aims to explore the correlation between different non-culprit vessel OCT-parameters and FFR value in the patients with recent acute myocardial infarction. The study included 114 patients with acute myocardial infarction (ST elevation myocardial infarction and non ST elevation myocardial infarction)for whom primary PCI (percutaneous coronary intervention) was performed for the culprit lesion. The non-culprit vessels with intermediate coronary stenoses (157 lesions) were evaluated in a staged procedure (during the index hospitalization) with OCT, FFR and revascularization was performed accordingly. Minimal luminal area (MLA) and percent luminal area stenosis (PSA) were analyzed in relation with the FFR value. Results: There is good correlation between OCT-derived parameters and FFR values in patients with recent acute myocardial infarction. Minimal luminal area (MLA) and percent luminal stenosis area (PSA) were independent predictors of FFR< 0,80 in multivariate logistic regression analysis. A value of 2,08 mm2 for the MLA and 76,85 % for the PSA have proved to be the best cut-offs for predicting a FFR< 0,80. Conclusions: OCT parameters are valuable additional tools in current angiographic practice, including patients with acute myocardial infarction, with the ability to bring numerous direct imagistic and indirect hemodynamic information.

The Roman economy of the Iberian Peninsula has habitually been characterised in terms of prestige goods and economic activities such as trade, mining and metallurgy. The analysis of plant-based foods –less prestigious but more essential in everyday life– has commonly been marginalised in state-of-the-art reviews. The O Areal saltworks is exceptional in terms of the large number of organic materials it preserves, and the excellent state of that preservation. After its abandonment (end of the 3rd/4th century AD), the saltworks was briefly used as a dumping ground for the surrounding area. The site's archaeobotanical remains, preserved under anoxic, waterlogged conditions, consist of the building materials used at the saltworks, tools and other artefacts, organic objects employed in activities such as fishing, and refuse. The assemblage suggests a wide diversity of species to have been introduced into northwestern Iberia during the Roman Period, including the mulberry, peach, fig, plum, grapevine, and melon. The notable presence of other edible fruit species that normally grew wild during this period, such as chestnut, walnut, stone pine, and cherry trees, might be related to the start of their cultivation.

The urban mangrove of the Vitória Bay, Espírito Santo, Southern Brazil suffers from anthropogenic impacts, which interfere in the foliar spectral response of its species. Identifying the spectral behavior of these species and creating regression models to indirectly obtain structure data like the Leaf Area Index (LAI) are powerful environmental monitoring tools. In this study, LAI was obtained in 32 plots distributed in four stations. In situ LAI regression analysis with the SAVI resulted in significant positive relationships (r² = 0.58). Forest variability regarding the degree of maturity and structural heterogeneity and LAI influenced the adjustment of vegetation indices (VIs). The highest regression values were obtained for the homogeneous field data, represented by R. mangle plots, which also had higher LAI values. The same field data were correlated with SAVI of a RapidEye image for comparison purposes. The results showed that, images obtained by a UAV have higher spatial resolution than the Rapideye image, and therefore had a greater influence of the background. Another point is that the statistical analysis of the field data with the IVs obtained from the RapidEye image did not present high regression coefficient (r² = 0.7), suggesting that the use of VIs applied to the study of urban mangroves needs to be better evaluated, observing the factors that influence the leaf spectral response.

Fire-tolerant eucalypt forests of south eastern Australia are assumed to fully recover from even the most intense fires but surprisingly very few studies have quantitatively assessed that recovery. Accurate assessment of horizontal and vertical attributes of tree crowns after fire is essential to understand the fire’s legacy effects on tree growth and on forest structure. In this study, we quantitatively assessed individual tree crowns 8.5 years after a 2009 wildfire that burnt extensive areas of eucalypt forest in temperate Australia. We used airborne lidar data validated with field measurements to estimate multiple metrics that quantified the cover, density, and vertical distribution of individual-tree crowns in 51 plots of 0.05 ha in fire-tolerant eucalypt forest across four wildfire severity types (unburnt, low, moderate, high). Significant differences in the field-assessed mean height of fire scarring as a proportion of tree height, and in the proportions of trees with epicormic (stem) resprouts were consistent with the gradation in fire severity. Linear mixed-effects models indicated persistent effects of both moderate- and high-severity wildfire on tree crown architecture. Trees at high-severity sites had significantly less crown projection area and live crown width as a proportion of total crown width than those at unburnt and low-severity sites. Significant differences in lidar-based metrics (crown cover, evenness, leaf area density profiles) indicated that tree crowns at moderate- and high-severity sites were comparatively narrow and more evenly distributed down the tree stem. These conical-shaped crowns contrasted sharply with the rounded crowns of trees at unburnt and low-severity sites, and likely influenced both tree productivity and the accuracy of biomass allometric equations for nearly a decade after the fire. Our data provide a clear example of the utility of airborne lidar data for quantifying the impacts of disturbances at the scale of individual trees. Quantified effects of contrasting fire severities on the structure of resprouter tree crowns provide a strong basis for interpreting post-fire patterns in forest canopies and vegetation profiles in lidar and other remotely-sensed data at larger scales.

The latest EU regulation on geographical indications (EU Regulation No. 1151/2012) has intro-duced a set of new tools for the protection and enhancement of food products in rural areas, under the group name of optional quality term (OQT). The Commission Delegated EU Regulation, No. 665/2014, regulated the conditions for the use of the optional quality term «mountain product» (MP), to support the implementation of a mountain value chain. This new tool is aimed at pro-moting local development, maintaining the economic activities in mountain areas and redistrib-uting wealth, whilst, at the same time, promoting the territory. Pecorino and goat cheeses are typ-ical Italian cheeses made usually with whole raw ewe's or raw goat's milk, without starter cul-ture addition. In an attempt to characterize these productions, the aim of this study was to inves-tigate the evolution of enterococci during the production and ripening of Pecorino cheese made in three different farms, located in Umbria, Italy in areas facing natural or other specific constraints as stipulated by Regulation 1305/2013 on support for rural development by the European Agri-cultural Fund for Rural Development (EAFRD). Enterococci are enteric organisms which are commonly isolated from ewe and goat's milk production in Umbria, Italy. Counts of enterococci in raw milk ranged from 1.75 for ovine milk to 3.62 for ewe milk and a marked reduction was observed after thermization especially in ovine milk. Out of 100 isolates, 69 were E. faecium, 23 E. durans, 8 E. faecalis and 2 E. casseliflavus and the distribution of species between farms and be-tween samples showed a prevalence of E. faecium in ovine farms and E. durans in ewes farms, with an equal distribution between samples. High percentages of susceptible isolates were found for amoxicillin/clavulanic acid, ampicillin, chloramphenicol, sulphamethoxazole, sulphameth-oxazole/trimethoprim, ticarcillin, vancomycin. A high prevalence of resistant strains (> 30%) was observed for amikacin, ciprofloxacin, ceftriaxone, kanamycin, tetracycline. A comparison of this results with those of previous works on similar dairy products revealed high levels of resistance to antimicrobials which needs to be addressed.

The bay is a space barrier for the development of island-type cities and a high-quality waterfront landscape resource. This study takes Xiamen a typical island city in China as an example. First, It use the method of satellite telemetry technology combined with GIS software and spatial syntax, respectively, from the material space level and social space level, to summarize the rapid urbanization process of this city since 1990-2018, focusing on the construction process of three large-scale waterfront park systems in the transition period of inter-island development in it, and comparing the similarities and differences of their spatial forms. Further, from the choice of the axis model and the integrated analysis results, we discuss the spatial efficiency changes. The construction of the three major bay waterfront park systems in this city reflects a huge change in development pattern from lagging construction, synchronous planning, to advanced layout, providing a continuous and variable spatial form for the development of the bay region and improving space efficiency, which one of the important ways to develop and transform island-type cities. We hope to provide the reference for the development including sustainable development of other island cities around the world

Carbon dioxide (CO2), a major greenhouse gas, capture and separation has recently become a crucial technological solution to reduce atmospheric emissions from fossil fuel burning. Thereafter, many efforts have been put forwarded to reduce the burden on climate change by capturing and separating them especially from larger power plants by the utilization of different technologies. Those technologies have often suffered from high operating cost and huge energy consumption. On right side, physical process such as adsorption is very cost effective process which have been widely used to adsorb different contaminants including CO2. Henceforth, this review covers the overall efficacies of CO2 capture by the utilization of carbon based materials through adsorption technology. Subsequently, we also address the associated challenges and future opportunities of carbon based materials (CBMs). For CO2 capture, it was found that CBMs followed the order of carbon nanomaterials (i.e., graphene, graphene oxides, carbon nanotubes and their composites) < mesoporous -microporous or hierarchical porous carbons < biochar and activated biochar < activated carbons.

In the present work, a methodology for wind field reconstruction based on the Meteo Particle Model (MPM) from Numerical Weather Prediction (NWP) data is presented. The development of specific wind forecast services is a challenging research topic, in particular for what concerns the availability of accurate local weather forecasts in highly populated areas. Currently, even if NWP Limited Area Models (LAMs) are run at spatial resolution of about 1 km, this level of information is not sufficient for many applications, for example to support drone operation in urban contexts. The coupling of MPM with the NWP Limited Area Model COSMO has been implemented in such a way that the MPM reads the NWP output over a selected area and provides wind values in the generical point considered for the investigation. The numerical results obtained reveal a good behavior of the method in reproducing the general trend of wind speed, as confirmed also by the power spectra analysis. The MPM is able to step over the intrinsic limitations of the NWP model in terms of spatial and temporal resolution even if the MPM inherits the bias that inevitably affects the COSMO output.

Classical laws of friction suggest that friction force is proportional to the normal load and independent of the nominal contact area. As a great improvement in this subject, it is now widely accepted that friction force is proportional to the real area in contact, and much work has been conducted based on this hypothesis. In present study, this hypothesis will be carefully revisited by measuring the friction force and real contact area in-site and real-time at both normal loading and unloading stages. Our experiments reveal that the linear relation always holds between friction force and normal load. However, for the relation between friction force and real contact area, the linearity holds only at the loading stage while fails at the unloading stage. This study may improve our understanding of the origin of friction.

The accurate calculation of real contact area between rough surfaces is a key issue in tribology. In this paper, based on the geometrical information of total contact area and the number of contact spots with respect to surface separation, a new method is proposed to determine the relation between real contact area and normal load. The contact of rough surfaces is treated as an accumulation of incremental multi-plateaus indentations with varying average contact radius. Comparisons with direct finite element calculations and some other theoretical predictions demonstrate the efficiency of this approach.

The sinking of cavities in urban areas is a very important geological risk to which many towns in Puglia are exposed. The study, mapping, geological and speleological description, classification and cataloging of forms and types of cavities is of fundamental importance for each urban center because it is linked to past local anthropic and natural processes, unique to each site. All this could lead to an enhancement of existing underground cavities in urban areas through conservation and continuous monitoring. Unfortunately in many cases these underground cavities have been used as landfills and subsequently abandoned. One of these cavities at the end of March 2007 collapsed in the inhabited center of Gallipoli causing damage to the structures and fortunately not to human lives. In the area relating to the collapsed cavity, a series of geophysical investigations were undertaken with the use of ground penetrating radar methodology in an attempt to delimit the area of collapse and understand the possible types of interventions for restoring the area. In the same area the measures were repeated 16 years later (December 2022) due to another collapse. The results show a much more widespread danger situation.

Evaluation of the effectiveness of protected areas is critical for forest conservation policies and priorities. To evaluate their effectiveness, we used 30-m resolution forest cover change data between 1990 and 2010 for ~4,000 protected areas and analyzed the relationships of the effectiveness of protected areas with socio-economic variables. Our results show that protected areas in the Tropics avoided 83,500 ± 21,200 km2 of deforestation during the 2000s. Brazil’s protected areas have the largest amount of avoided deforestation of 50,000 km2. We also show the amount of international aid received by tropical countries compared to the effectiveness of protected areas. International aid had major benefits in Latin America led by Brazil while tropical Asian countries used the resource ineffectively. Our results demonstrate that protected areas have been relatively more efficient in countries where deforestation pressures were increasing, and governance and forest change monitoring capacity are important factors for enhancing the efficacy of international aid.

In the context of the rural revitalization strategy, it is urgent to accurately grasp the spatial differentiation characteristics and influencing factors of rural settlements in underdeveloped arid inland river basins. Taking the Shiyang River Basin as an example, the rural settlements from 2000 to 2019 were obtained by visual interpretation using satellite remote sensing data and official statistical data. Following the logical of "state characteristics - evolutionary patterns - influence factors - layout optimization", the average nearest index, gravity-center migration model, spatial statistical analysis and other methods were used combine with GIS. The spatiotemporal pattern evolution characteristics of rural settlements in the past 20 years have been analyzed. The results revealed the following: 1) The distribution pattern of rural settlements in the study area is sheet-like and strip-shaped. The projects in the southeast are mostly distributed in a patchy pattern with high density, while the characteristics in the west and north are exactly opposite. The objects in the south are distributed in the alluvial area of rivers, while settlements in the north are located in the oasis area. 2) From 2000 to 2019, the scale of rural settlements in the Shiyang River Basin, where simultaneous occurrence of new-built and disappearing phenomena, shows an expansion trend that fast firstly and then slow. Spatially, rural settlements in the basin show a trend of clustering towards the southwest. 3) The distribution characteristics of rural settlements are close to water and roads, greatly influenced by urban-rural integration and ecological migration. The results will provide scientific basis for accelerating the modernization of rural areas, and the construction of new rural areas according to local conditions.

Delayed atomic layer deposition (ALD) of ZnO, i.e., area selective (AS)-ALD, was successfully achieved on silicon wafers (Si/SiO2) terminated with tris(dimethylamino)methylsilane (TDMAMS). This resist molecule was deposited in a home-built, near atmospheric pressure, flow-through , gas-phase reactor. TDMAMS has been shown to react with Si/SiO2 in a single cycle/reaction and to drastically reduce the number of silanols that remain at the surface. ZnO was deposited in a commercial ALD system using dimethylzinc (DMZ) as the zinc precursor and H2O as the coreactant. Deposition of TDMAMS was confirmed by spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), and wetting. ALD of ZnO, including its selectivity on TDMAMS – terminated Si/SiO2 (Si/SiO2/TDMAMS), was confirmed by in situ ellipsometry, ex situ SE, XPS, and/or high sensitivity – low energy ion scattering (HS-LEIS). The thermal stability of the TDMAMS resist layer, which is an important parameter for AS-ALD, was investigated by heating Si/SiO2/TDMAMS in air and nitrogen at 330 ºC. ALD of ZnO takes place more readily on Si/SiO2/TDMAMS heated in the air than in N2, suggesting greater damage to the surface heated in the air. To better understand the in situ ALD of ZnO, the data were also plotted as the normalized growth per cycle and to show the selectivity. Even one, short pulse of TDMAMS effectively passivates Si/SiO2. TDMAMS can be an effective small molecule inhibitor of ALD of ZnO on Si/SiO2 surfaces.

In addition to changes in the amount of rain, changes in land use upstream are considered a factor that directly affects the maximum runoff flow in a basin, especially in areas that have experienced floods and flash floods. This research article presents the application of the SWAT model to assess runoff in areas that have experienced flash floods, in order to analyze the proportion of land use change to the maximum runoff. Study areas that had experienced flash floods were in 3 basins in Thailand (Lam Saphung Basin, Phrom River Basin, and Chern River Basin Part 1 which is a subbasin of the Nam Chi River Basin). This study analyzed two main factors that influence runoff in the river basin: Changes in rainfall and changes in land use by considering 2 simulation situations.: (1) Changes in land use affecting runoff assessed by considering land use maps in 2006, 2008, 2010, 2015, 2017, 2019, and 2021 when using rainfall data only in the year 2021 for all cases, and (2) Changes in the amount of rainfall influencing runoff by considering the rainfall record in 2006, 2008, 2010, 2015, 2017, 2019, and 2021 when using the land use data only in the year 2021 for all cases. The results of the study found that the SWAT model can be effectively applied to estimate annual runoff in areas that have experienced flash floods under 8 parameters with R2 values of 0.74, 0.82 and 0.74 for the Lam Saphung River Basin and the Phrom River Basin and the Chern River Basin Part 1 respectively. In addition, it was found that the proportion of land use changes that involved changes from forest areas to residential areas was the greatest from 2008 to 2010 in the Phrom River Basin and Chern River Basin Part 1. This resulted in an increase in the maximum runoff amount of 77.78% and 46.87%, respectively. When land use was constant, it was found that the rainfall in 2010, which was the highest, also had the greatest impact on the runoff in all 3 areas.

The Qinghai-Tibetan Plateau area (QTPA) features a unique environment that has witnessed the selective breeding of diverse breeds of domestic livestock, exhibiting remarkable adaptability. Nevertheless, Anaplasma spp., Rickettsia spp., Coxiella spp., and Borrelia spp. represent tick-borne bacterial pathogens that pose a global threat and have substantial impacts on both human and animal health, as well as on the economy of animal husbandry within the Qinghai-Tibetan plateau area. In this study, a total of 428 samples were systematically collected from 20 distinct areas within the Qinghai plateau. The samples included 62 ticks and 366 blood samples obtained from diverse animal species, to detect the presence of Anaplasma spp., Rickettsia spp., Coxiella spp., and Borrelia spp. The prevalence of infection in this study was determined as follows: Anaplasma bovis accounted for 16.4% (70/428), A. capra for 4.7% (20/428), A. ovis for 5.8% (25/428), Borrelia burgdorferi sensu lato for 6.3% (27/428), Coxiella burnetii for 0.7% (3/428), and Rickettsia spp. for 0.5% (2/428). Notably, no cases of A. marginale and A. phagocytophilum infections were observed in this study. The findings revealed an elevated presence of these pathogens in Tibetan sheep and goats, with no infections detected in yaks, Bactrian camels, donkeys, and horses. To the best of our knowledge, this study represents the first investigation of tick-borne bacterial pathogens infecting goats, cattle, horses, and donkeys within the Qinghai plateau of the Qinghai-Tibetan Plateau Area. Consequently, our findings contribute valuable insights into the distribution and genetic diversity of Anaplasma spp., Rickettsia spp., Coxiella spp., and Borrelia spp. within China.

Repairing of small and isolated delamination area in carbon fiber reinforced polymer (CFRP) without significantly altering the composite structure is studied in this research. A small drilled hole was introduced at the center of the delamination section of CFRP, providing the channel for epoxy infill of sharp delamination cracks. The pressureless infill repair was achieved through the capillary action of an acetone-diluted resin solution (without hardener) with CNT reinforcement, e.g., 89 m/m% of acetone, 10 m/m% of resin and 1m/m% of CNT. Such an acetone-rich resin pre-coating (RPC) solution is easy to prepare and apply to the drilled hole area. Curing of CNT-toughened resin infill was induced by filling the small-drilled hole with a resin-hardener mixture toughened by CNT/Aramid pulp. The effectiveness of delamination repair with curing periods of two weeks and three months were compared. Flexural strength measurements indicated that 77% (potentially 100%) of the restoration was achievable.

Understanding the distribution in drought and floods plays an important role in disaster risk management. The present study aims to explore the trends in the standardized precipitation index and extreme precipitation days in China, as well as to estimate the economic losses they cause. We found that in the Northeast China, northern of North China and northeast of Northwest China were severely affected by drought disasters (average damaged areas were 6.44 million hectares) and the most severe drought trend was located in West China. However, in the north of East China and Central China, the northeastern of the Southwest China was severely affected by flood disasters (average damaged areas were 3.97 million hectares) and the extreme precipitation trend is increasing in the northeastern of the Southwest China. In the Yangtze River basin, there were increasing trends in terms of drought and extreme precipitation, especially in the northeastern of the Southwest China, where accompanied by severe disaster losses. By combining the trends in drought and extreme precipitation days with the distribution of damaged areas, we found that the increasing trend in droughts shifted gradually from north to south, especially in the Southwest China, and the increasing trend in extreme precipitation gradually shifted from south to north.

Crop residue burning produces a lot of polluting gases and fine particles, endangering human health, damaging soil structure, and causing fire accidents. In addition to the impact of residue burning on the local environment, pollutants can spread with the wind to more distant areas and impact the air quality of surrounding areas, especially cities. Nevertheless, a comparative analysis of the impact of two common residue burning parameters, the number of residue fire points and residue burned area, on urban air quality indicators has not been reported. In this study, the correlation between these two different residue burning parameters on air quality in Daqing City was investigated comparatively using the Visible Infrared Imaging Radiometer Suite (VIIRS) fire point product, the Moderate-resolution Imaging Spectroradiometer (MODIS) burned area product, and buffer zone analysis. The association between MODIS burned area products and air quality index (AQI) was found to be around 0.8, with a maximum of 0.816 at a buffer zone radius of 50 km. Meanwhile, it was found that the correlation between the number of residue fire points extracted from the VIIRS active fire products and air quality was above 0.6, again with a maximum of 0.745 at a buffer radius of 50 km. Within other levels of buffer zones, the correlation between residue burned area and AQI was consistently higher than that between residue fire points and AQI. By comparing the correlation between VIIRS fire points, MODIS burned area, and AQI with the concentration of each pollutant, we found that the correlation between residue burned area and AQI and the concentration of each pollutant is higher. MODIS burned area monitoring, on the other hand, detects changes in the time series of images taken by satellite at two transit moments to obtain the new burned area and cumulative burned area during this period, allowing the monitoring of fire traces caused by fire points at non-transit moments. From analyzing the correlation between residue fire points, residue burned area, and the concentration of each pollutant (PM2.5, PM10, CO, NO2, SO2, O3), we found significant correlations between residue burning and PM2.5, PM10, CO, and NO2 concentrations, with the highest correlation (R2) of 0.81 for PM2.5. Moreover, the correlation between residue burned area and PM2.5, PM10, CO, and NO2 concentrations was significantly higher than that between the number of residue fire points and their concentrations.

In Ethiopia, land degradation in the form of gully development and soil nutrient depletion is a very serious issue. The goal of this study is to determine how different types of land management practices and slope positions affect particular soil physico-chemical characteristics in the Agamssa watershed. Using systematic sampling techniques, soil samples were taken using a sampling quadrat (15 * 15 m) that was placed 50 m apart from one another. A total of 54 quadrats were planted at three slope positions: upper (>15%), middle (10–15%), and foot (3–10%) slope respectively. 18 composite soil samples were then. A two-way ANOVA was used to analyze the data, and the Least Significant Difference (LSD) test was used to separate the means at p ≤ 0.05. According to the study's findings, the value of most soil physical and chemical characteristics was higher in closed area than on open grazing land, as well as at foot slope position compared to middle and upper slope positions. The higher mean value (7.3 ppm) was recorded at the foot slope, while the lower mean value (4.9 ppm) was found at the upper slope position. The exchangeable cations such as Mg+2, K+, and Na+ were significantly (p≤ 0.01) affected by the main effect of land-use types. The higher mean values of Mg+2 (9.70 mq/100g), K+ (0.38 mq/100 g), and Na+ (0.035 mq/100 g) were found at area closure, whereas the lower mean values of Mg+2 (7.33 mq/100g), K+ (0.30 mq/100 g), and Na+ (0.027 mq/100g) were recorded at open grazing land. It was able to conclude this study that area closure enhances the physical and chemical qualities of soil and recovers woody plant species. Therefore, converting open grazing land into a closure area is advised.

To alleviate the contradiction between the increasing demand for water and the shortage of resources and to provide a favorable institutional environment for water rights trading, the Chinese government has strengthened the top-level design of water management system. However, the water-rich regions (southern regions of China) have good water resource endowment and a surplus of total water consumption indicators. Does this mean that there is no incentive and no need to conduct water rights trading in these regions? Through the investigation of water rights circulation cases in the Taihu Basin, a typical water-rich region of China, we established the existence of trading demand and some difficulties in conducting transactions. This paper argues that the needs of trading include alleviating the water gap in regional development, solving the water demand for large new projects, coordinating trans-jurisdiction water disputes. The plight of trading includes the lack of awareness, irregular process, excessive administrative intervention, and imperfect trading system.

In order to increase the number of tourism in ecotourism, enhance the ecotourism attractions. It is essential to construct the ecotourism service system for the Penghu National Scenic Area because the ecology system is sensitive and frangible. This study adopts the Fuzzy Delphi method and Analytic Hierarchy Process (AHP) to establish an index framework of ecotourism service system of Penghu National Scenic Area. The results indicated that there are 4 dimensions which include 21 factors service attributes are identified as the service system for traveling. The findings are concluded as follows:(1)the security management capability is the main principle for ecotourism service system;(2)the ecological diversity is fundamental for the marine environment and the core resource for ecotourism;(3)the transportation capacity and environmental quality need to improve; (4)the marine environmental resources is the most important item for sound ecotourism development; (5)the enhancement of the operation willingness of local communities can promote ecotourism development;(6)the natural resources should be protected to provide an ideal recreational environment for ecotourism;(7)the development of ecotourism needs to support local conservation to achieve sustainability. The perspectives of sustainability and service system are involved to support the value of this study, which can continuously sustain Penghu archipelago.

For a hierarchy of large scale structures, like galaxies, galaxy clusters, super-clusters, etc. the requirement that their gravitational (binding) self-energy density must at least equal or exceed the background repulsive dark energy density implies a universal mass-radius relation given by M/R² ~ 1g/cm². Here we point out that this mass-radius relation also holds for important individual biological structures, and even various organisms as a whole such as humans, trees, and to behemoths like whales, even though the physics is different. Here we try to understand this universality from two different physical considerations. We also point out the coincidence that the densities of most biological entities are close to that of water, and that the average density of main-sequence stars and giant planets are close to this density. We give a physical basis for the same.

Abstract Natural disasters such as earthquakes have affected urban historical centers severely. Considering the limitations of the existing methods in conservation and preservation of these sensitive areas, and recent advances in technological devices and techniques such as GIS and 3D printers, this article aims to propose a new methodology utilizing available knowledge and resources. The authors of the present research propose an innovative, technological, and highly accurate method to assess the seismic vulnerability of historical contextures rectifying the existing obstacles and limitations. Through this methodology, the level of trial and error is substantially reduced and the output is stronger, more optimized and more conservative as compared with commonly used methods. Using high tech principles and theoretical foundations (i.e. sustainability principles) this method achieves updated analyses, practical plans, and economic optimization.

Abstract: Cancer survivors are at an increased risk for cardiovascular disease (CVD). However, the association between particulate matter (PM) and CVD risk among cancer survivors (alive >5 years since diagnosis) is unclear. We investigated the risk of CVD among 40,899 cancer survivors within the Korean National Health Insurance Service database. Exposure to PM was determined by assessing yearly average PM levels obtained from the Air Korea database from 2008 to 2011. PMs with sizes <2.5 (PM2.5), <10 (PM10), or 2.5-10 (PM2.5-10) μm in diameter were compared, with each PM level exposure further divided into quintiles. Patients were followed up from January 2012 to date of CVD event, death, or December 2017, whichever came earliest. Adjusted hazard ratios (aHRs) and 95% confidence intervals (CIs) for CVD were calculated using Cox proportional hazards regression by PM exposure levels. Compared with cancer survivors in the lowest quintile of PM2.5 exposure, those within the highest quintile had a greater risk for CVD (aHR 1.31, 95% CI 1.07-1.59). Conversely, increasing PM10 and PM2.5-10 levels were not associated with increased CVD risk (p for trend 0.078 and 0.361, respectively). Cancer survivors who reduce PM2.5 exposure may reduce their risk of developing CVD.

We propose a new estimator for creating expansion factors for survey plots in the USDA Forest Inventory and Analysis program. This is a regularized version of the raking estimator widely used in sample surveys. The regularized raking method differs from other predictive modeling methods for integrating survey and ancillary data in that it produces a single set of expansion factors that can have general purpose use to produce small area estimates and wall-to-wall maps of any plot characteristic. This method also differs from other more widely used survey techniques, such of GREG estimation, in that it is guaranteed to produce positive expansion factors. We extend the previous method here to include cross-validation, and provide a comparison to expansion factors between the regularized raking and ridge GREG survey calibration.

Extracellular enzymes catalyze biogeochemical reactions in soil, cycling carbon and nutrients in agricultural systems. Enzymes respond quickly to soil management, including organic amendment inputs, such as biochar, a charcoal-like solid byproduct of bioenergy production. In a previous agricultural field trial, a pine biochar amendment caused an approximately 40% decrease in the enzyme activities of β-glucosidase (BG) and phosphatase (PHOS). The large surface area of the pine biochar has the potential to sorb nutrients and other organic molecules. To test if sorption caused decreased enzyme activity, we used a laboratory assay to quantify the activity of two sorbed enzymes: BG and acid PHOS, involved in the cycling of carbon and phosphorous. The enzymes were incubated with three solid phases: (1) the high surface area pine biochar, (2) the agricultural soil, and (3) a low surface area grass biochar, for an additional comparison. We quantified the sorbed enzymes at pH 6, 7, and 8, using a Bradford protein assay, and measured the immobilized enzyme activities via high-throughput fluorometric analysis. After sorption onto pine biochar, detectable BG and PHOS activity levels dropped by over 95% relative to the soil, supporting direct sorption as one mechanism that reduces enzyme activity in biochar amended soil. This laboratory assay demonstrated that sorption could account for the lack of priming of native soil organic matter and changes in soil phosphorous cycling after pine biochar addition.

Water resources management is one of the most important challenges worldwide because water represents a vital resource for sustaining life and environment. In the aim of sustainable groundwater management, the identification of aquifer recharge areas is a useful tool for water resources protection. In a well-developed karst aquifer, environmental isotopes provide support for identifying aquifer recharge areas, residence time and interconnections between aquifer systems. This study deals the use of environmental isotopes to identify the main recharge area of a karst aquifer in the Upper Valley of Aniene River (Central Italy). The analysis of 18O/16O and 2H/H values and their spatial distribution in the aquifer, make it possible to trace back groundwater recharge areas based on average isotope elevations. The Inverse Hydrogeological Balance Method was used to validate spring recharge elevations obtained by the use of stable isotopes. Areas impacted by direct and rapid rainfall recharge into the study area were delineated, showing groundwater flowpaths from the boundaries to the core of the aquifer. The results of this study demonstrate the contribution that spatial and temporal isotope changes can provide to the identification of groundwater flowpaths in a karst basin, taking into account the hydrogeological setting

Volatility is the most widespread measure of risk. Volatility modeling allows investors to capture potential losses and investment opportunities. This work aims to examine the impact of the two waves of COVID-19 infections on the return and volatility of the stock market indices of the euro area countries. The study also focuses on other important aspects such as time-varying risk premium and leverage effect. Thus, this investigation employed the Threshold GARCH(1,1)-in-Mean model with exogenous dummy variables. Daily returns of ten euro area stock indices from 4th January 2016 to 31th December 2020 has been used for the analysis. The results reveal that euro area stock markets respond differently to the COVID-19 pandemic. Specifically, the first wave of COVID-19 infections had a notable impact on stock market volatility of euro area countries with large and middle financial centres while the second wave had a significant impact only on stock market volatility of Belgium.

It is known from ancient Egyptian mathematical papyri that the Egyptians were able to calculate the area of a circle with great accuracy. How they found the formula for this calculation was still unknown. Here it is shown how the unknown ancient Egyptian mathematician found a method for calculating the area of a circle and the ratio of a circle’s circumference to diameter.

In order to study the strength changes of concrete specimens under different loading conditions, based on the principle of minimum energy dissipation and from the Angle of concrete failure energy per unit area, the finite element numerical simulation software was applied to concrete specimens with different failure modes of tension, compression, bending and torsion, and the double-broken line damage constitutive model was adopted to simulate and analyze the failure forms of concrete specimens under different loading conditions. The failure area and failure energy of each specimen during loading were quantitatively calculated under each failure mode, and the relationship between the failure area and failure energy consumed under different failure modes was analyzed. The results show that under different failure modes, the failure area of concrete specimens is different, the energy consumed during failure is different, and the strength is different. However, in the process of failure, no matter how the failure mode changes, the failure energy W per unit area remains unchanged and is a constant, which is related to the physical properties of concrete itself.

A significant portion of the harvested land base in western Canada is becoming old enough or entering a phase where thinning is a legitimate option. A comprehensive review of the existing knowledge of commercial thinning (CT) treatments applied to pine and spruce-dominated stands in Alberta was conducted, with particular regard to the intensity, the timing of interventions, method and impacts on crop tree growth responses. Although the geographical focus of this review is Alberta, information on this topic is more complete in other areas of North America, and Europe, where there is a long history of density management. In areas of eastern North America, our review revealed that CT from below, with tree removal levels from 27 to 43% of the basal area could increase the merchantable wood volume from 11 to 60 m3 ha-1, depending on stand age and intensity of thinning. For Alberta conditions, and considering the risks, we conclude that commercial thinning basal area removal should be in the range of 25 to 40%, depending on a variety of factors such as species, wind firmness and insect or disease incidence and risk. Thinning too aggressively and/or too late will increase the blowdown risk but the literature is fairly consistent in suggesting that live crown ratios should be >40% to maximize the chance of growth response and minimize the blowdown risk. In cases where stands are also threatened by stressors such as drought, wind, and insect or disease outbreaks, CT treatments likely offer the potential at limiting the overall risk, but localized knowledge and experience are critical. It is intended that the information presented may support ongoing and future research trials and growth and yield (G&Y) model development with regard to potential CT treatments to apply and the likely results of practical application to commercial forestry.

Plants are an important feature of urban ecosystems which provide numerous environmental and ecosystem benefits such as defenses against noise and air pollution and conservation of biodiversity. The aim of this study was to investigate the structure and composition of urban vegetation in different urban habitats like roadsides, parks, gardens and playgrounds in Dhaka South City area. Stratified random sampling method was used in this study. A total of 221 plant species belonging to 63 families were identified and recorded. Among all plant species Swietenia macrophylla, Polyalthia longifolia, Cocos nucifera, Samanea saman, and Artocarpus heterophyllus are recorded as the most dominant. Most of the tree and shrub population were found between 6-9 m and 1-3m height classes whereas most of tree and shrub population were found in between 10-15cm dbh classes. Highest IVI was found for Swietenia macrophylla (193.22%) followed by Polyalthia longifolia (184.59%), Samanea saman (138.37%), Cocos nucifera (79.9%) and Delonix regia (68.27%) respectively. Average frequency, density, dbh and basal area were found 46.82%, 138.28 tree ha^-1, 458.59 cm ha^-1 and 12.33 m² ha^-1 respectively. Findings of this study reveals that structural attributes of plant represent quite young and still developing vegetation. This research will help to plan for future green infrastructure which will maintain ecosystem function, therefore, providing longer term benefits for the city dwellers.

The Kanchenjunga Conservation Area (KCA) is a high mountain protected area in eastern Nepal undergoing socio-economic and environmental changes that are unprecedented in the region’s history. In the following paper, we discuss recent changes involving new road construction, climate change, adventure tourism, and the wildlife/forest cover/medicinal plant sectors. Our assessments are based on the collective results of past and recent field research, remote sensing analysis, oral histories, and literature reviews. While similar changes are occurring in mountain protected areas (MPA) throughout Nepal, it is suggested that the KCA differs from other regions in that it still retains the option of conducting detailed feasibility, environmental, and impact assessments prior to the implementation of major change-associated projects, particularly the construction of roads. In turn, the KCA might avoid many of the environmental, social, and economic problems experienced elsewhere in Nepal, while enhancing its status, income-generating capacities, and sustainability as a global destination for adventure, nature, and cultural tourism.

With the development of society and the economy, the unified planning of architectural style has become a difficult problem in the competition between urban expansion and the protection of tra-ditional buildings in villages and towns. At the same time, it also allows people to re-examine the appearance and quality of life of traditional village buildings. In this paper, the Conditional Gen-erative Adversarial Network (CGAN) is used to construct a method of building facade generation in villages and towns, so as to gradually realize the governance of the style of villages and towns. At the same time, it has also reduced the restoration of the facades of villages and towns and the graphic design of rural tourism products, showing its application value and potential in the field of planning and design. In the research, taking villages and towns in the Wuyishan area of China as an example, the method is used to carry out model training, image generation, and comparison of the derivation results of different assumed building contours and product contours. The research shows that: (1) CGAN can be used to derive and design the facades of conventional civil buildings in villages and towns. (2) In terms of product graphic design, especially the common tourist cultural products fans and water cups, show significant potential. (3) The construction of this method is not only applicable to villages and towns under the World Heritage City, but can be further promoted and used in the future for cities and villages that have a demand for architectural style consistency.

This work presents a new model to obtain the minimum cost design for a rectangular isolated footing, taking into account that the column is located in any part of the footing. The methodology is developed by integration to obtain the moments, bending shear and punching shear according to the American Concrete Institute ACI 318-14. This document presents the simplified and precise equations of the four moments, four bending shears and one punching shear acting on the footing. Some designs have been developed by the trial and error method to determine the footing dimensions, and later the thickness and steel area of the footing are obtained. Some authors present the minimum cost design for a rectangular isolated footing taking into account that the column is located in the center of gravity of the footing, and other authors present very complex algorithm. Numerical examples are presented to obtain the minimum cost design of rectangular isolated footings under biaxial bending, and some results are compared with those of other authors considering the same conditions. The new model presents a smaller contact area with the soil and a lower design cost than those presented by other authors.

A new method for wide-area urban roof assessment of suitability for solar photovoltaics is introduced and validated. Knowledge of roof geometry and physical features is essential for evaluation of the impact of multiple rooftop solar photovoltaic (PV) system installations on local electricity networks. This paper begins by reviewing and testing a range of existing techniques for identifying roof characteristics. It was found that no current method is capable of delivering accurate results with publicly available input data. Hence a different approach is developed, based on slope and aspect using LIDAR data, building footprint data, GIS tools and aerial photographs. It assesses each roof’s suitability for PV installation. That is, its properties should allow the installation of at least a minimum size photovoltaic system. In this way the minimum potential solar yield for region or city may be obtained. The accuracy of the new method is then established, by ground-truthing against a database of 886 household systems. This is the largest validation of a rooftop assessment method to date. The method is flexible with few prior assumptions. It is based on separate consideration of buildings and can therefore generate data for various PV scenarios and future analyses.

Feral cats are both difficult to manage and harder to monitor. We analysed the cost-efficacy of monitoring the pre- and post-bait abundance of feral cats via camera-traps or track counts using four years of data from the Matuwa Indigenous protected Area. Additionally, we report on the recovery of the feral cat population and the efficacy of subsequent Eradicat® aerial baiting programs following 12 months of intensive feral cat control in 2019 that consisted of aerial baiting and leg-hold trapping. Significantly fewer cats were captured in 2020 (n = 8) compared to 2019 (n = 126). Pre-baiting surveys for 2020 and 2021 suggested that the population of feral cats on Matuwa was very low, at 5.5 and 4.4 cats/100 km respectively, which is well below our target threshold of 10 cats/100 km. Post-baiting surveys then recorded 3.6 and 3.0 cats/100 km respectively, which still equates to a 35% and 32% reduction in cat activity. Track counts recorded significantly more feral cats than camera traps and were cheaper to implement. We recommend that at least two methods of monitoring cats be implemented to prevent erroneous conclusions.

Floods are some of the most devastating crop disasters in Southeast Asia. The Pampanga River Basin in the Philippines is a representative flood-prone area, where cultivation patterns are varied according to the flood risk. However, quantitative analyses on the effects of flooding on cultivation patterns remain quite limited. Accordingly, this study analyzes MODIS LAI data (MCD15A2H) from 2007 to 2022 to evaluate annual and geographical differences in cultivation patterns in the Candaba municipality of the basin. The analysis consists of two stages of hierarchical clustering: a first stage for area classification and a second stage for the classification of annual LAI dynamics. As a result, Candaba is divided into four areas, which are found to be partly consistent with the observed flood risk. Subsequently, the annual LAI dynamics in each area are divided into two or three clusters. The obvious differences among the clusters are caused by flooding in the late rainy season, delaying the start of planting in the dry season. The clusters also indicate that the cultivation patterns slightly changed over the 16 years of the study period. The results of this study suggest that the two-stage clustering approach provides an effective tool for the analysis of MODIS LAI data when considering cultivation patterns characterized by annual and geographical differences.

Increased CO2 emissions and air pollution impact the environment and human health. In this manner, new functionalized polyaminal-based polymers are synthesized via a one-pot polycondensation reaction of melamine with aldehyde monomers 2-bromo-1-naphthaldehyde and 2-hydroxy-1-naphthaldehyde to yield bromine- hydroxyl- functionalized polymer networks PAN-BrNA and PAN-HNA, respectively. The polyaminals porosity parameters were investigated and applied as an adsorbent for CO2 capture. FTIR, solid-state 13C NMR, and X-ray diffraction verified the PANs structure development. A scanning electron microscope and N2 adsorption-desorption methods were utilized to identify the porous properties of the polymers at 77 K. The Brunauer-Emmett-Teller (BET) surface area of PAN-BrNA and PAN-HNA is (16.6990 m2/g) and (716.7568 m2/g), respectively. At 273 K, PAN-BrNA and PAN-HNA can take CO2 gas up to (4.42786 cm3/g) and (47.55 cm3/g), respectively. The findings show that inserting functional groups has a significant impact on surface area and porosity parameters, as well as CO2 uptake.

Automatic generation control (AGC) plays a vital role in creating an equilibrium between generated output power and load demand, in order to maintain frequency at desired value. This study focuses on performance analysis of simple-multi attribute rating technique (SMART) assisted proportional-integral-derivative (PID) controller design for AGC of two interconnected power systems. PID controller is designed by minimizing frequency variations, area control errors for area-1 and area-2, and tie-line power deviation. An objective function is framed considering error minimization of aforementioned factors as sub-objectives. The construction of objective function involves using the integral of time-multiplied absolute error (ITAE) for frequency deviations for area-1 and area-2, ITAE for deviation in tie-line power, and ITAEs for area control errors for area-1 and area-2 as sub-objective functions. By assigning appropriate weights to these sub-objective functions, an overall objective function is formed. This study determines these weights in an organized manner using SMART method, rather than randomly/equally assigning them. Overall objective function is minimized using Jaya algorithm. To demonstrate effectiveness of the proposed Jaya-based PID controller, its performance is analysed and compared with controllers tuned using other optimization algorithms, including sine cosine, Luus-Jaakola, teacher-learner based optimization, Nelder-Mead simplex, and elephant herding optimization. Considering six different case studies that consider a range of load variations, responses for fluctuations in frequency and tie-line exchange are plotted. Statistical and non-parametric analysis performed further provide additional insights into the performance of Jaya-based PID controller.

Cotton cultivation and sustaining its productivity is challenging in temperate arid regions around the globe. Exploring suitable cotton cultivation areas to improve productivity in such climatic regions is essential. Thus, this study explores the ecologically suitable areas of cotton cultivation using the Maxent model, having 375 distribution points of long-staple cotton and various factors, including 19 climatic factors, 2 terrain factors, and 6 soil factors in Xinjiang. The area under the curve (AUC) of the predicted results was greater than 0.9, indicating that the model's predictions had fairly high accuracy. However, the main environmental factors that affect cotton's growth are the lowest temperature in the coldest month, the hottest month, the precipitation in the driest season, and the monthly average temperature difference. Further, the temperature factors contribute 71%, while the contribution ratio of terrain and soil factors is only 22%. The research shows that the current planting area is consistent with the predicted area in many areas of the study. Still, some areas, such as the Turpan region, northwest of Bayingolin Mongol Autonomous Prefecture, are supposed to be suitable for planting cotton, but it is not planted. The current potential distribution area of long-staple cotton is mainly located in Aksu Prefecture and the northern part of the Kashgar Prefecture region. The climatic prediction shows that the growing area of long-staple cotton may expand to southern Altay, central Aksu, and Bortala Mongol Autonomous Prefecture. This study will be helpful for cotton cultivation suitability areas in Xinjiang and other regions with similar environments.

Due to the influence of bio-geographical and environmental factors, as well as anthropogenic landscape features, organism shows different reproductive strategies among different populations. There is lack of detailed information on the reproductive biology of Kentish plover Charadrius al-exandrinus in arid lands in Central Asia. In this study, we summarized the characteristics of the reproductive biology of three geographically distinct plover populations in Aibi Lake in the Northwestern Xinjiang, Taitema Lake in the Southern Xinjiang and artificial reservoirs around Urumqi City in Northern Xinjiang respectively, based on 440 eggs of 158 nests observed and ana-lyzed from April to July of 2019 and 2020. We find that there is no significant difference in clutch size among the three populations. However, the egg size of Taitema Lake population is signifi-cantly larger than those of the other two populations, whilst egg volume and clutch volume of ar-tificial reservoirs population are significantly larger than that of Aibi Lake. With the postpone-ment of laying date, the northern and northwestern populations respectively show the character-istics of small clutch size and relatively small egg size, and decrease of reproductive outputs. The heavier female plovers in Taitema Lake lays eggs earlier, and there was significantly positive cor-relation between the female body mass and the clutch size and egg size. The tarsometatarsus length of the female plovers was significantly positively correlated with the reproductive output in all three populations. The model selection results show that female body size and ambient tem-perature restrict the egg size and reproductive output of Kentish plovers, which is consistent with the upper limit hypothesis of the maternal condition and the maternal constraint. Our data sup-port that Kentish plover show distinct flexibility in breeding strategies to cope with the harsh nat-ural environment in arid lands of Xinjiang, China. The results of relatively high average clutch size and average egg size imply that saline wetlands in Western China are important breeding habitats for Kentish plover.

Chert rock is a by-product of sand quarrying (about 40% in the geological section). All attempts to use ordinary technologies for aggregate production from chert have been economically unsuccessful, resulting in significant chert "waste" accumulation covering vast quarry areas. This paper presents the study results of the effect of microwave irradiation on the mechanical properties of chert gravel, which is mineralogically relatively homogenous and consists of fine quartz grains. The results show that an increase in irradiation time decreases the strength of chert gravel (by a factor of 4-6 for the 2.5 min of irradiation), while the quenching changes the fractional content of the samples after the crushing test, decreasing the Gravel-to-Sand ratio.

The study of the area model of Pinus tabulaeformis forest provides an important reference for improving the management of Pinus tabulaeformis and revealing the growth law of Pinus tabulaeformis. According to the classification method proposed by Munro, stand growth and harvest prediction models are divided into three categories: full stand model, single wood model and diameter distribution model. Based on the fixed sample data of Shangluo Pinus tabulaeformis, the spatial instead of time method is used to process the data, and the weight coefficient of each model in the combined prediction model is calculated by using the optimal weighting method. The single wood model, the whole forest model and the diameter distribution model are combined by the combined prediction method to integrate the fault area prediction of Pinus tabulaeformis forest. The results show that the combined prediction method is more accurate than the single model (single wood model, whole forest model and diameter distribution model). At the same time, the method can improve the compatibility of the forest break area prediction model, ensure the consistency of the forest break area prediction, and provide a new direction for the research of forest resource monitoring and investigation.

The coronavirus disease (COVID-19) pandemic is rapidly spreading across the world. In Democratic Republic of Congo (DRC), 11 out of 26 provinces have been affected on 19 June 2020. The purpose of this study was to assess the public views, attitudes and beliefs related to the COVID-19 pandemic among the population of an unaffected city.Methods: This is a descriptive observational study conducted in an unaffected city using a questionnaire. Findings: A total of 769 people participated. The average age was 36 ±14 years. The sex ratio (male: female) was 1.6. The majority of respondents (97%) is aware of the existence of the COVID-19 pandemic, it is well informed about the signs of the disease, its severity and barrier measures, however few of them have adopted the change in habit and behavior in respect of the barrier measures. Lack of water for handwashing is the most common difficulty in complying with barrier measures (71%). The COVID-19 is considered as an artificial virus designed to reduce the world population by 26%, God’s punishment (22%). Only 36% of the participants are in favor of vaccination against COVID-19. Vaccine is, a western conspiracy to spread COVID-19 in Africa (38%), testing it on Africans (35%), sterilize Africans’ people (12%).Conclusions: Cities not yet affected by COVID-19 in DRC are aware of the existence of the disease, but insufficiently prepared to deal with it. It is important to increase awareness on barrier measures, combating false information, and improving regular water supply for regular handwashing.

An increase in air temperature leads to a significant transformation of the relief and landscapes of the Arctic. The rate of permafrost degradation, posing a profound change in the Arctic landscape, depends on air temperature, vegetation cover, type of soils, surface and ground waters. The existing international circumpolar programs dedicated to monitoring the temperature state of permafrost TSP (Thermal State Permafrost) and active layer thickness CALM (Circumpolar Active Layer Monitoring) are not sufficient for a comprehensive characterization of geocryological conditions. Yet, no standardized protocol exists for permafrost monitoring and related processes. Here, we propose a novel multi-parameter monitoring protocol and implement for two sites in the European part of the Russian Arctic: the Yary site along the coast of the Baydaratskaya Bay in the Kara Sea (68.9°N) within the continuous permafrost area and the Hanovey site in the Komi Re-public (67.3°N) within the discontinuous permafrost one. The protocol includes drilling boreholes, determining the composition and properties (vegetation cover and soils), snow cover measure-ment, geophysical imaging, active layer estimation and continuous ground temperature meas-urements. Ground temperature measured in 2014 – 2020 revealed that amplitudes of surface tem-perature fluctuation had no significant difference between the Yary and Hanovey sites, while that the mean annual temperatures between the areas had a considerable difference of greater than 3.0 °C. The period of the presence of the active layer changed with the year (e.g., ranging between 135 and 174 days in the Yary site), showing longer when the air temperatures in summer and the preceding winter were higher. Electrical resistivity tomography (ERT) allowed determining the permafrost distribution and active layer thicknesses. Thermometry results were consistent with our geophysical data. Analyzing the composition and properties of frozen soils helped better interpret the data of geophysical and temperature measurements. Our work by integrating the study of the soil properties, ground temperatures, and ERT allowed fully characterize these sites, suggesting that it helps better understand the thermal state in any other research sites in the European north of Russia. Our suggested monitoring protocol enables calibrating and verifying the numerical and analytical models of the heat transfer through the earth’s surface.

The merge areas of freeway work zones include relatively significant safety hazards that have continuously led to urgent safety issues to be solved by the management departments. In order to make up for the cumbersome process of independent identification of rear-end collision and lane change collision on complex road sections, an appropriate identification method of traffic conflicts in the merge area of freeway work zone was explored, this study collected vehicle running tracking data from the merge areas of multiple work zones, using an unmanned aerial vehicle video technique. Based on an inter-frame difference method and the principle of a spatio-temporal context visual tracking algorithm, the vehicles were detected and tracked, and the coordinate data of the vehicles in continuous motion were parsed using MATLAB extension tools. Based on the behavior characteristics of vehicle conflict avoidance, a new identification method for evading severe traffic conflicts is proposed according to the initial velocity, acceleration and accident rate of section traffic. Then, a statistical analysis was performed on the spatial distribution characteristics of the traffic conflicts in typical merge areas. The impacts of the road conditions in work zones, vehicle factors, and traffic flow factors on the traffic conflicts were analyzed. A binomial logistic model was established to identify the main influencing factors. The results show that in the merge area of the freeway work zone, there are serious traffic conflicts between vehicles in the following two situations: (Ⅰ) v∈[7,13.5] m/s and a∈[-3.96,-0.65]m/s2; and (Ⅱ) v∈[13.5,24.3] m/s, and a∈[-3.96,-1.57] m/s2. The probabilities of serious traffic conflicts in the first and last 25 m of the merge area are greater than those in the other sections. The smaller the space between the upstream work zone and the merge area, the greater the probability of serious traffic conflicts between vehicles. When the average vehicle speed is relatively high, the probability of serious conflicts is the highest, i.e., by a multiple of 5.95 from the baseline. Moreover, the probability of serious conflicts between vehicles is higher for larger vehicles, i.e., 4.765 times that for small vehicles. The research results can serve as a reference for freeway management departments to improve the safety levels of merge areas during road work. For example, the probability of serious conflicts can be effectively reduced by setting up reasonable speed limit signs in the work zone, increasing the spacing between work zone and merge area, and appropriately diverting large vehicles.

In order to alleviate the conflict between populations and land-resource, Tianjin has adopted multi-phase reclamation projects to formed large-scale artificial reclamation land. However, the reclamation areas are susceptible to subsidence, which demonstrate a serious threat to infrastructure and people’s lives and property. The SBAS-InSAR was used to acquired surface deformation of Tianjin Binhai New Area from January 2017 year to December 2022 year, analyzed in depth the response relationship between land subsidence and reclamation projects time as well as the land use type. The results show that the Lingang Industrial Zone was the earliest to be reclaimed, with extensive reclamation completed by 2016 year, while Nangang Industrial Zone and Hangu Port started reclamation projects in 2009 year, some areas are still currently under construction. There is a strong correlation between surface deformation and reclamation time, the severe land subsidence occurred over newly reclaimed areas. Surface deformation gradually intensifies from west to east, the maximum surface settlement in Nangang Industrial Zone, Lingang Industrial Zone from the west to the east has changed from -50 mm to -890 mm,45 mm to -580 mm, respectively, reclamation area of Hangu Port with maximum surface deformation is -250 mm. Significant differences deformation among different land use types, which reclamation projects completed in the same time. Subsidence is positively correlated with surface load, in areas with higher surface loads, the surface settlement is also severer,the average surface settlement for the heavy shipyard, 67 grain storage tanks, 27 grain storage tanks, road, and bare land are -201 mm, -166 mm, -107 mm, -64 mm, and -43 mm, respectively. This study reveals significant differences of surface deformation in the reclamation completed at different times and the load is the main driving factor of settlement difference in the reclamation land completed at the same time. Which has important guiding significance for preventing and controlling geological disasters in the reclamation area and later development planning.

Family doctors can have an active role in identifying significant population needs and solutions. During COVID-19 epidemic, patient home monitoring with pulse oximetry has been a key aspect of care of patients. However, pandemics bring shortage medical equipment such as pulse oximetry. Through the local maker community in a matter of days four “smart” pulsoximeters were created and built. Following Internet of Things principles, the pulsoximeters were programmed to transmit recorded data through Wi-Fi, in real time, directly to the doctors. Each protype pulsoximeter served a family doctor during the pandemic. Building instructions were shared in maker-oriented websites, potentially leading to additional small-scale productions.

Globally, rice is one of the most important staple food crops. The most significant metric for evaluating the rice growth and productivity is the Leaf Area Index (LAI), which can be effectively monitored using remote sensing data. Hyperspectral remote sensing provides contiguous bands at narrow wavelengths for mapping LAI at various rice phenological stages and it is functionally related to canopy spectral reflectance. Hyperspectral signatures for different phases of rice crop growth was recorded using Airborne Visible Near-Infrared Imaging Spectrometer - Next Generation (AVIRIS-NG) along with corresponding ground based observations. Ground based hyperspectral canopy spectral reflectance measurements was recorded with FieldSpec 3 Hi-Res spectroradiometer (ASD Inc., USA; spectral range: 350-2500 nm) and LAI data from 132 farmer’s fields in Southern India. Among 29 hyperspectral vegetation indices tested, eight were found promising for mapping rice LAI at various phenological stages. Among all the growth stages, elongation stage was the most accurately estimated using vegetation indices that exhibited significant correlation with the airborne hyperspectral reflectance. The validation of hyperspectral vegetation indices revealed that the best fit model for estimating rice LAI was mND705 (red-edge, blue and NIR bands) at seedling and elongation, SAVI (red and NIR bands) at tillering and WDRVI (red and NIR bands) at booting stage.

Our research is in the tangent space of a point on a 4-dimensional Riemannian manifold. Besides the positive definite metric, the manifold is endowed with a tensor structure of type (1,1), whose fourth power is minus the identity. Both structures are compatible and they define an indefinite metric on the manifold. With the help of the indefinite metric we determine a circle in different 2-planes in the tangent space on the manifold, we also calculate the length and area of the circle. On a smooth closed curve such as a circle, we define a vector force field. Further, we obtain the circulation done by the vector force field along the curve, as well as the flux of the curl of this vector force field across the curve. Finally, we find a relation between these two values, which is an analogue of the well known Green’s formula in the Euclidean space.

Sentinel-2 provides the opportunity to map the snow cover at unprecedented spatial and temporal resolution at global scale. Here we calibrate and evaluate a simple empirical function to estimate the fractional snow cover (FSC) in open terrain using the normalized difference snow index (NDSI) from 20 m resolution Sentinel-2 images. The NDSI is computed from flat surface reflectances after masking cloud and snow-free areas. The NDSI-FSC function is calibrated using Pléiades very high resolution images and evaluated using independent datasets including SPOT 6/7 satellite images, time lapse camera photographs, terrestrial lidar scans and crowd-sourced in situ measurements. The calibration results show that the FSC can be represented with a sigmoid-shaped function 0.5×tanh(a×NDSI+b)+0.5 where a = 2.65 and b = -1.42 yielding a root mean square error of 25%. Similar RMSE are obtained with different evaluation datasets with a high topographic variability. With this function, we estimate that the confidence interval on the FSC retrievals is 38% at the 95% confidence level.

Earth’s land surface area is raised from conventionally flat 15 to 64 Gha to account for hilly undulation and soil relief detail. Three main aspects are: topography, rugosity/tortuosity and micro-relief/porosity of vegetation-free ground. Recalibration is arrived at from four approaches: first, direct empirical estimates from the few compiled satellite or LiDAR data with means of +2.5–26% progressively overlain by +94% at cm² scale for soil ruggedness then +108% for mm² micro-relief; second, from digital elevation models with 1.6–2.0 times flat areas; third, by ‘reverse engineering’ global soil bulk densities and carbon reserves requiring x 2–6 land. Finally, a Fermi estimation conveniently sets the World’s new surface area – that exposed to Sun, air and rain – at 100 Gha (with 36 Gha flat ocean). Soil organic carbon (SOC) is thence raised to 8,580 Gt mainly in SOM/humus with its biotic complexity plus roots, VAM-fungi and leaf-litter, that itself = 17,800 Gt. Although four to six times IPCC’s or NASA/NOAA’s calculations of just 1,500–2,300 Gt SOC, this is likely an underestimation. Global biomass and biodiversity are at least doubled (x 2–3.5) and net primary productivity (NPP) similarly increased on land to >270 Gt C yr^-1 due to terrain.