Pipelines are regularly trenched and then forgotten, just allowed to run till failure and producing an overall incredibly poorly run system that is ripe for improvements. One of the most needed areas for improvement are proactive methods for condition assessment of existing pipelines. This can be divided into two main categories: proactive condition assessment technologies and nonstructural proactive condition improvement technologies. The objective of this paper is to identify the best option available on the market for both these areas of proactive condition assessment for existing pipelines. The compared proactive condition assessment technologies include Acoustic Resonance Testing, Ultrasonic Thickness Measurement Testing, Phased Array Ultrasonic Testing, Pulsed Eddy Current Testing, and the Multisensor ROV. The technologies compared for nonstructural proactive condition improvement were Jetting, Pigging and also included the main requirements for a proper catalog of pipe information that can be used to produce a ranked system for assessing which pipes are at highest risk for failure and can be used to efficiently direct resources for pipe maintenance. The final conclusion was that Acoustic Resonance Testing and the Multisensor ROV are the two best products available for the proactive condition assessment of existing pipelines available on the market from their versatility of application and amount of information gathered during pipe inspection. The best option available in the group of nonstructural proactive condition improvement technologies was pigging for its incredibly low risk and low social impact as well as potential for improvement in the near future. It was also concluded that every agency would be better off with a catalog of the pipe material, age, length, diameter, and burial depth to know the location of every pipe an agency owns as well as to rank every pipe in terms of risk of failure and impact of said failure to most efficiently direct resources.

Background: Type 2 diabetes mellitus (T2DM) affects over 500 million people worldwide, and over 50% of this group experience the most common complication, diabetic peripheral neuropathy (DPN). The presence of advanced glycation end-products (AGEs) have been linked with the development of DPN. The present study assessed for AGE levels in participants with type 2 diabetes, and explored the hypothesis that there may be increased AGE levels in more severe DPN. Methods: 124 participants with T2DM were consecutively recruited, and underwent skin autofluorescence, clinical assessment for peripheral neuropathy, peripheral nerve ultrasound, nerve conduction studies and axonal excitability assessment. Results: Elevated levels of AGE did not correlate with higher clinical neuropathy scores, sural sensory nerve amplitude, median or tibial nerve cross-sectional area or measures of axonal excitability. While higher AGE readings correlated with diabetic kidney disease, these recordings were not associated with more severe peripheral neuropathy outcomes on multiple regression analysis. Conclusion: The present study suggests that accumulation of AGE is not associated with clinical, electrophysiological and morphological measures of neuropathy in T2DM.

Obesity is one of the most prevalent and damaging metabolic conditions and is a risk factor for the development of other disorders that define the metabolic syndrome. Recent studies have identified a significant role of AGE accumulation and RAGE signaling pathways in the underlying mechanisms that cause the chronic inflammatory response present in obesity which, ultimately, leads to adipose tissue dysfunction. Given the current interest and increasing evidence on possible therapeutic opportunities in the AGE-RAGE axis, the purpose of this work is to review the key findings on new small molecules and bioactive compounds that act as AGE or RAGE inhibitors and their effects on metabolic parameters of people with obesity. The search queries were defined according to the following PICO question: “What are the effects of AGE-RAGE antagonism on adipose tissue metabolism and other metabolic parameters of people with obesity? “. Article search was performed in three online databases: PubMed, Scopus, and Web of Science. In the end, 20 studies were selected for this review. Overall, the reviewed molecules showed beneficial effects on body weight, glucose tolerance, insulin resistance, inflammatory profile, and adipose tissue metabolism in mice models with obesity. There are still very few studies on human application of these molecules, but the ones that were reviewed revealed controversial data when compared to animal studies. Therefore, further human clinical trials should be performed to retrieve more conclusive data.

Traditional seismic wave-based tunnel advanced geological forecasting techniques are primarily designed for drill and blast method construction tunnels. However, given the fast excavation speed and limited prediction space in Tunnel Boring Machine (TBM) construction tunnels, traditional methods have significant technical limitations. This paper analyzes the characteristics of different types of TBM construction tunnels and, considering the practical construction conditions, identifies an effective observation system and data acquisition method. Utilizing numerical simulation, a model for advanced detection of typical unfavorable geological formations is established by obtaining the wave field response characteristics of seismic waves in three-dimensional space. The seismic wave reflection method can effectively receive information from unfavorable geological formations in front of the tunnel face. To address the challenges in advanced forecasting for TBM construction tunnels, a method of ellipsoid positioning velocity analysis, which takes into account the constraints of three-component data directions, is proposed. Based on the characteristics of the advanced forecasting observation system, the method compares the maximum values on the spatial isochronous ellipsoidal surface to determine the average velocity of the geological layer rays, thereby enabling accurate inversion of the spatial distribution ahead. Field verification of advanced geological forecasting based on ellipsoid positioning velocity analysis for TBM tunnels is conducted. The results indicate that this method can be used to obtain the three-dimensional velocity of the predicted unfavorable geological formations in front of the tunnel and is effective for the application of geological forecasting in TBM construction tunnels, thus providing crucial references and assurances for construction.

Pancreatic cancer presents formidable challenges due to rapid progression and resistance to conventional treatments. Oncolytic viruses (OVs) selectively infect cancer cells and cause cancer cells to lyse, releasing molecules that can be identified by the host’s immune system. Moreover, OV can carry immune-stimulatory payloads such as interleukin-12 which when delivered locally can enhance immune system-mediated tumor killing. OV’s are very well tolerated by cancer patients due to their ability to selectively target tumors without affecting surrounding normal tissues. OV’s have recently been combined with other therapies including chemotherapy and immunotherapy to improve clinical outcomes. Several OVs including adenovirus, herpes simplex viruses (HSV), vaccinia virus, parvovirus, reovirus, and measles virus have been evaluated in preclinical and clinical settings for the treatment of pancreatic cancer. We evaluated the safety and tolerability of a replication-competent oncolytic adenoviral vector carrying two suicide genes (thymidine kinase, TK; and cytosine deaminase, CD) and human interleukin-12 (hIL12) in metastatic pancreatic cancer patients in a phase 1 trial. This vector was found to be safe and well-tolerated at the highest doses tested without causing any significant adverse events (SAE). Moreover, long-term follow-up studies indicated an increase in the overall survival (OS) in subjects receiving the highest dose of the OV. Our encouraging long-term survival data provide hope for patients with advanced pancreatic cancers, a disease that has not seen a meaningful increase in OS in the last five decades. In this review article, we highlight several preclinical and clinical studies and discuss future directions for optimizing OV therapy in pancreatic cancer. We envision OV-based gene therapy to be a game changer in the near future with the advent of newer generation OVs that have higher specificity and selectivity combined with personalized treatment plans developed under AI guidance.

The electronics industry is a significant contributor to environmental challenges, generating approximately 50 million tons of electronic waste annually and high levels of carbon dioxide emissions throughout the production and disposal of devices. This paper investigates the interplay between reliability and sustainability by analyzing how degraded components affect the environmental footprint of electronic products. Using a board with 215 components as a baseline, we calculate the mean time between failures (MTBF) and compare it to scenarios involving degraded components. Our findings demonstrate that degraded components can reduce MTBF by up to 50%, resulting in higher failure rates, increased electronic waste, and up to 30% more CO2 emissions due to shortened product lifespans. This study underscores the crucial importance of component quality control in the production process to improve both reliability and sustainability. Additionally, the broader economic and environmental impacts of using unchecked components are highlighted, showing their contribution to elevated failure rates, shortened product lifespans, and an estimated 20% increase in e-waste. By adopting a 100% inspection protocol, leveraging advanced technologies, and enforcing stringent material quality controls, manufacturers can significantly enhance the reliability of electronic products while reducing their environmental impact, thus fostering a more sustainable electronics industry.

In the dynamic arena of healthcare research, where the complexities of data often rival the intricacies of biological systems, the ability to model and analyze such multifaceted datasets is crucial. This comprehensive review delves into the evolution and application of Soft Sets and their extensions, including HyperSoft Sets, SuperHyperSoft Sets, IndetermSoft Sets, IndetermHyperSoft Sets, and TreeSoft Sets, in healthcare claims data analysis. These extensions address intricate challenges in data analysis, offering versatile frameworks for managing uncertainty and indeterminacy inherent in healthcare claims data. By exploring their definitions and applications, this review elucidates how these mathematical tools have evolved and their significance in advancing healthcare research and enhancing data analysis methodologies. Real-world examples underscore the implications of these tools, emphasizing their pivotal role in facilitating informed decision-making and knowledge discovery in healthcare. The review systematically examines various case studies and research findings to illustrate the practical utility of Soft Set extensions. Detailed analyses of real-world scenarios highlight advancements in processing complex healthcare data. The conclusions drawn from this analysis indicate that the adoption of Soft Sets and their extensions can significantly improve the accuracy and efficiency of healthcare data analysis, ultimately contributing to better healthcare outcomes and more informed policy-making. Future research directions are also discussed, suggesting further potential applications and developments in this field.

Background: The Advanced Lung Cancer Inflammation Index (ALI) is a novel, comprehensive index that integrates inflammation and nutritional status, incorporating parameters such as albumin, body mass index (BMI), and the neutrophil-to-lymphocyte ratio (NLR). Unlike traditional inflammation biomarkers, this study aims to evaluate the prognosis of IPF patients by considering both inflammation and nutritional status. Method: A total of 102 patients with IPF were included in the study. Clinical data were obtained from the patients’ medical records. NLR and ALI score were calculated based on data collected at the initiation of antifibrotic treatment using the following formula: Neut/Lym and albumin × BMI / NLR. Results: IPF subject subgroups in terms of ALI based on gender–age–physiology (GAP) stages (1,2,3), FVC (median split, <70% vs ≥70%), DLCO (<51% vs ≥51%), 6-Minute Walk Test (6MWT) (<350 vs ≥350) and CCI (≤1 vs >1). ALI showed significant difference depending on the categories of GAP stage, FVC, DLCO, and 6MWT but these differences were not observed based on the charlson comorbidity index (CCI) categories (sırasıyla p=0.000, p=0.000, p=0.000, p=0.001, p=0.233). Receiver Operating Characteristic (ROC) curve analysis was performed to evaluate the sensitivity and specificity of ALI, albumin, NLR, and BMI in determining the mortality risk in IPF patients. ALI demonstrated a sensitivity of 63.6% and a specificity of 98.9% at a threshold of 11.2 (AUC = 0.945, 95% CI 0.892–0.998, p < 0.000). Conclusion: We determined that ALI levels are significantly associated with disease severity and mortality in patients with IPF.

High-resolution (2 km) high-frequency (hourly) SST data from 2015-2021 provided by the Advanced Himawari Imager (AHI) onboard the Japanese Himawari-8 geostationary satellite were used to study spatial and temporal variability of the China Coastal Front (CCF) in the South China Sea. The hourly SST data were processed with the Belkin and O’Reilly (2009) algorithm to generate long-term mean monthly maps of SST gradient magnitude (GM) and frontal frequency (FM). The horizontal structure of CCF was investigated from cross-frontal distributions of SST along 11 fixed lines that allowed to determine inshore and offshore boundaries of the CCF and calculate the CCF strength defined as the total cross-frontal step dSST = Offshore SST – Inshore SST. Combined with the results of Part1 of this study (Belkin, Lou, Yin, 2023), where the CCF was documented in the East China Sea, the new results reported in this paper allowed the CCF to be reliably traced from the East China Sea via Taiwan Strait into the northern South China Sea and farther west up to the east coast of Hainan Island.

The growing global population and limitations in fish catch production have led to a surge in the demand for aquaculture. Contaminants of emerging concern (CEC) are frequently being detected at low levels in surface water. These CECs, which include previously unidentified or unregulated pollutants, pose potential risks to health and the environment, though their impacts are not yet fully understood. Extensive research studies have been proposed and undertaken to address the issue of aquaculture wastewater, aiming to minimize its impact and implement effective treatment methods. This review provides an analysis of various technologies used for treating aquaculture wastewater using advanced oxidation processes (AOPs) focusing on photocatalysis and ozonation. It examines their advantages and disadvantages, as well as their respective treatment efficacies and discusses their potential applications in sustainable aquaculture practices complying with the Sustainable Development Goals of 1,2 and 6 and the Environmental Social and Governance (ESG) framework.

This research explores the adoption of advanced analytics in supply chain decision-making, emphasizing its transformative impact on organizational efficiency and strategic advantage. The study investigates the key drivers behind the adoption of advanced analytics, including the growing complexity of data, the need for agility, and the pursuit of competitive advantage and cost reduction. It identifies significant challenges such as data integration difficulties, high implementation costs, and a shortage of skilled professionals, which organizations face when integrating these sophisticated tools. Despite these challenges, the research highlights the substantial benefits of advanced analytics, including enhanced forecasting accuracy, improved supply chain visibility, optimized processes, and cost savings. The findings indicate that while the implementation of advanced analytics varies across different sectors—such as retail, manufacturing, logistics, and healthcare—the overarching themes of improved efficiency and better decision-making are consistently observed. The study also discusses future trends, noting the integration of emerging technologies such as artificial intelligence, machine learning, and blockchain, which promise to further enhance analytics capabilities and accessibility. The successful adoption of advanced analytics relies not only on technological advancements but also on fostering a data-driven organizational culture, investing in continuous learning, and ensuring robust data governance. As supply chain management continues to evolve, advanced analytics will play a crucial role in driving strategic success and maintaining a competitive edge in a complex and dynamic market environment.

Locally advanced rectal cancer requires multimodal treatment. Radiotherapy is being explored for intensification to improve rates of pathological complete responses (ypCR-rates) that correlates with better outcomes. This study reports a comparison between standard versus escalated dose in preoperative scenario. YpCR-rates, toxicity, postoperative complications, disease-free and overall survival at 5 years have been described. From 2012 to 2019, 99 patients were analyzed retrospectively: standard arm (mean 47.5Gy) vs. dose-escalated arm (mean 54.3Gy). All patients were treated with 3DRT in 25 fractions, concomitantly capecitabine and surgery performed according to total mesorectal excision principles in both arms. YpCR was reported by “College of American Pathologist grades”; gastrointestinal (GI) and genitourinary (GU) toxicity using the “Common Terminology Criteria for Adverse Events” (CTCAE 4.0). YpCR-rates were higher in the dose-escalated group (25% vs. 10.64%; p = 0.07) with a lower rate of non-treatment response (61.36% vs. 38.64%; p = 0.11). No statistical differences between arms were found in terms of oncological outcomes, all postoperative complications (p = 0.15), second surgeries (p = 0.62), or deaths (p = 0.62). CTCAE acute-GI and GU toxicity were grade I or II in both arms. Our study shows that the dose-escalated scheme is safer and obtains higher ypCR-rates.

The durability of bridge decks is a critical factor in ensuring the safety and longevity of transportation infrastructure. This article explores advanced materials and innovative techniques designed to mitigate cracking in bridge decks, a common issue that can compromise structural integrity and increase maintenance costs. It provides a comprehensive review of cutting-edge solutions such as Fiber-Reinforced Polymers (FRP), High-Performance Concrete (HPC), Ultra-High Performance Concrete (UHPC), and self-healing concrete technologies. Each material is analyzed for its ability to enhance strength, reduce permeability, and improve resistance to environmental stressors. Additionally, the article examines the role of surface treatments, sealants, and routine maintenance practices in prolonging the life of bridge decks. By synthesizing current research and practical applications, this article offers valuable insights and recommendations for engineers, contractors, and policymakers seeking to advance bridge deck durability through innovative materials and methodologies.

Polyesters based advanced thin films have versatile industrial applications, especially in the filed of textiles, packaging and electronics. Recent advances in polymer science and engineering resulted in development of advanced amorphous and semi-crystalline polyesters with exceptional performance compared to conventional polymeric films. Among these, 1,4-cycloheanedimethanol (CHDM) and cyclic monomer-based polyesters have gained considerable attention attention for their exceptional characteristics and potential applications in smart films. This review article provides a comprehensive overview of the recent advances in the synthesis, characterization, and applications of CHDM and cyclic monomer based advanced polymers for smart film applications. It discussed the structure-property relationship of these innovative polyesters and highlights their unique characteristics including thermal, mechanical, and barrier characteristics. Furthermore, this article also emphases the solution, melt, and solid state polymerization of the polymers. Special emphasis is placed on the influence of the addition of 2nd diol or 2nd diacid on the performance characteristics of synthesized polyesters/copolyesters to explore their versatile industrial applications. Additionally, the impact of stereochemistry of the monomers is also explored to optimized the characterization of polyester, suitable for the industrial applications. Furthermore, this article explores the potential of these advanced polyesters to be considered as a potential materials for smart film applications, especially in the filed of flexible electronics. Finally, the article examines the challenges and future recommendations for the development CHDM and cyclic monomer-based polyesters for smart film applications. It discusses potential avenues for further research, including in-depth studies for the synthesis and characterization of polyesters, development of sustainable and biodegradable alternatives cyclic monomers, alternative green approaches for the synthesis of polymers etc. This review article provides a valuable insights for the researcher from academia and industry working in the field of polymer science and materials engineering.

Heart transplantation (HT) is the gold standard therapy for advanced heart failure (AHF) and LVAD as destination therapy are an option in non-HT candidates. Most patients with AHF never receive a HT or a LVAD, so alternative strategies are needed. Intermittent levosimendan can reduce HF hospitalizations in AHF patients in the short term. It is uncertain whether the results of the comparison of inotropes with older generation LVAD would have the same outcomes in the current era of less sick but older, AHF treated with levosimendan patients. In this paper we compare the use of two therapeutic strategies for end-stage HF in patients not candidates for HT: Repetitive intermittent Levosimendan vs. LVAD as destination therapy. To do so we compare two multicentre cohorts of real-life patients from Spain: the LEVO-D Registry and the REGALAD registry. 715 patients coming from the 2 registries where found, 403 from the LEVO-D and 312 from the REGALAD. Non-adjusted median survival was shorter for LEVO-D patients; with the benefit for the LVAD seen only after the first year of therapy. The survival advantage for the LVAD cohort was also true after analysis of the matched cohort but, as in the non-matched analysis, the survival benefit was mainly shown after one year of follow up. We conclude that in elderly AHF non-HT-candidates, LVAD therapy offers significantly better long-term outcomes when compared to intermittent levosimendan; thus, it should be considered in carefully selected candidates. On the other hand, in poor LVAD candidates or highly comorbid patients, intermit-tent inotropic support with levosimendan could be a reasonable alternative to LVAD as 1-year outcomes are similar.

The use of chimeric antigen receptors (CAR-T cells) for the treatment of patients with malignant haematological diseases has become a well-established application, for conditions such as refractory or relapsed B cell acute lymphoblastic leukaemia (B-ALL), B cell lymphomas (BCL), and multiple myeloma (MM). Nearly 35,000 patients have received autologous CAR-T cells for the treatment of these conditions only in the USA. Since their approval by the Food and Drug Administration (FDA) in 2017, over 1200 clinical trials have been initiated globally and there are at least 10 different CAR-T cells with approval by different regulatory agencies around the globe. In the USA the Food and Drug Administration (FDA) has approved 6 commercial CAR-T cells that are widely distributed worldwide. At the time of this writing, several clinical trials have been performed in patients with solid tumours such as glioblastoma, renal and pancreatic cancer, as well as in patients with autoimmune conditions such as systemic lupus erythematosus (SLE), idiopathic inflammatory myositis (IIM), and systemic sclerosis (SS). There are also several studies showing the potential benefit of CAR-T cells for other non-malignant diseases such as asthma and even fungal infections. In this review, without pretending to cover all the current areas of treatments with CAR-T cells, we offer a brief summary of some of the most relevant aspects of the use of CAR-T cells for some of these conditions.

Advanced persistent threat (APT) attacks are sophisticated and organized attacks commonly motivated by political, financial, and strategic objectives. In order to comprehend their tactics, techniques, and procedures (TTP) and indicators, APT reports are valuable sources. While blue teams typically rely on server logs, firewall rules and user authorizations managed in database tables, attackers have a graph-based mindset. In this work, we propose a framework for discovering and evaluating APTs using graph-based algorithms. Cyber threat intelligence (CTI) was extracted from 40,358 pages of APT reports and transformed into a graph. Centrality, community, and similarity analyses were executed on the graph. As a result, critical and influential APT groups and indicators of compromise (IoC) were discovered. Similar attacks and APT groups were revealed. Analysis results were interpreted to create new strategic CTI that can be utilized in future security operations.

This study explores the strategic importance of leveraging supplier relationships for competitive advantage in the e-commerce industry. Strong supplier relationships are crucial for enhancing operational efficiencies, cost management, quality assurance, innovation, sustainability, and overall supply chain resilience. Through collaborative partnerships, e-commerce companies can streamline logistics, reduce costs, ensure consistent product quality, and foster innovation through joint development initiatives. Ethical sourcing and sustainable practices play a pivotal role in supplier relationship management (SRM), aligning with consumer expectations and enhancing brand reputation. Advanced technologies such as AI, blockchain, and IoT further transform SRM practices by improving transparency, efficiency, and decision-making capabilities across the supply chain. The study also discusses challenges in managing global supplier relationships, emphasizing the importance of effective communication, cultural sensitivity, and strategic risk management. By addressing these challenges and nurturing trust-based relationships with suppliers, e-commerce firms can navigate market complexities and achieve sustainable growth. This research provides insights for e-commerce companies seeking to optimize their supplier relationships and maintain competitive advantage in a dynamic market environment.

This qualitative study explores how businesses are adapting their Supplier Relationship Management (SRM) strategies to address the challenges and capitalize on the opportunities presented by evolving e-commerce trends. Through in-depth interviews with key industry stakeholders, the research investigates the integration of advanced technologies such as artificial intelligence (AI), blockchain, and the Internet of Things (IoT) into SRM practices. Findings reveal that these technologies enhance efficiency, transparency, and responsiveness within supply chains, enabling businesses to navigate complexities such as supply chain dynamics, fluctuating consumer demand, and regulatory compliance. The study identifies effective strategies employed by businesses, including enhancing communication channels with suppliers, diversifying supplier bases, and investing in technological advancements. These strategies enable businesses to mitigate risks, improve collaboration, and drive innovation, thereby maintaining competitive advantage in the digital marketplace. Collaborative practices such as joint product development, shared risk management, and co-investment in technology emerge as critical drivers of successful SRM. Ultimately, this research contributes to a deeper understanding of SRM in the context of e-commerce, offering insights into how businesses can optimize their supply chain operations amidst technological disruptions and market fluctuations. The findings underscore the importance of proactive adaptation and strategic alignment with suppliers to foster resilient and agile supply chains. As e-commerce continues to evolve, businesses must leverage these insights to refine their SRM strategies and sustain growth in an increasingly competitive environment.

Protein glycation impacts enzymatic activity, disrupts metabolic processes, and is associated with chronic degenerative diseases. The human glycolytic enzyme triosephosphate isomerase (HsTIM, TPI1, or HsTPI) is associated with various disorders, such as enzymopathies originating from mutations. It also possesses moonlighting functions and is now recognized as a cancer marker. Previous reports of HsTPI mutants have demonstrated a significant increase of methyl-glyoxal (MGO) due to trioses accumulation. We compared how catalytic activity exerts differen-tial kinetic and structural stability effects due to mutations by tracking fluorescent argpyrimi-dine adduct (ARGp) through interaction with Arginine-MGO. Circular dichroism and fluores-cence spectroscopy were explored in HsTPI-WT and mutants HsTPI-C217K “Like-WT”, HsTPI-N16D accumulated in cancer, and HsTPI-E104D human deficiency mutant, by cysteines accessibility and time loss of activity and unfolding propensity in mutant enzymes with aggre-gates refractory to proteolysis in the C217K. Our study sheds new light on the increased suscep-tibility of mutants to generate MGO adducts due to TPI isomerization of MGO precursor sub-strates. Nevertheless, mutations enhance a negative feedback cycle, in which accumulated MGO access promotes accelerated loss of activity that leads to unfolding and aggregation. The cumu-lative and accelerated increase in MGO adducts, which probably are responsible for the patho-logical state in this TPI variant, are partially reversed by adding MGO-scavenger molecules.

This qualitative research investigates the role of collaborative planning in synchronizing supply chain and marketing activities among multinational companies (MNCs). Collaborative planning integrates traditionally separate functions to enhance operational efficiency, customer responsiveness, and strategic alignment. The study employs semi-structured interviews with key informants from diverse MNCs across industries and geographies to explore practices, challenges, and outcomes associated with collaborative planning initiatives. Findings highlight the pivotal role of cross-functional collaboration and advanced technologies, such as artificial intelligence and big data analytics, in improving demand forecasting accuracy, optimizing inventory management, and enabling personalized marketing strategies. Challenges include organizational resistance, cultural barriers, and the complexity of aligning global strategies. Strategic outcomes encompass improved operational efficiency, cost savings, enhanced customer satisfaction, and strengthened competitive advantage. Moreover, the integration of sustainability goals underscores the importance of environmental responsibility and regulatory compliance in collaborative planning frameworks. The study also identifies emerging trends in digital transformation and agile supply chains shaping future practices. Overall, collaborative planning emerges as a strategic imperative for MNCs to navigate complexities, capitalize on opportunities, and sustain growth in a globalized marketplace.

This study explores the impact of supply chain visibility (SCV) on marketing strategies within the fast-moving consumer goods (FMCG) industry. In a rapidly evolving market characterized by complex supply chains and dynamic consumer demands, SCV offers a transformative capability by providing real-time data and insights into supply chain operations. Through semi-structured interviews with industry practitioners, the research identifies several key themes: enhanced demand forecasting, increased consumer trust through transparency, improved marketing agility, and the integration of advanced technologies. Findings suggest that SCV significantly improves the accuracy of demand forecasts by providing timely insights into inventory levels, production schedules, and market conditions. This enhanced forecasting aligns supply chain capabilities with marketing efforts, reducing stockouts and optimizing promotional activities. Moreover, SCV fosters consumer trust by enabling transparency regarding product sourcing and ethical practices, which can be effectively communicated in marketing campaigns to build brand loyalty. The agility provided by SCV allows companies to quickly adjust their marketing strategies in response to market disruptions and shifts in consumer preferences, making their campaigns more resilient and responsive. Advanced technologies such as IoT, blockchain, and analytics further enhance the benefits of SCV, providing deeper insights and more sophisticated capabilities for marketing. The study also highlights the importance of cross-functional collaboration between supply chain and marketing teams in leveraging SCV data effectively. Despite challenges such as the need for significant investment and organizational change, the advantages of SCV in enhancing marketing strategies and overall organizational performance are substantial. The research underscores SCV's critical role in shaping effective marketing strategies, offering FMCG companies a path to greater efficiency, agility, and consumer engagement in a competitive landscape.

This qualitative study explores the transformative role of digital technologies in enhancing supply chain efficiency and marketing effectiveness across diverse industries. The integration of Internet of Things (IoT), artificial intelligence (AI), blockchain, and advanced analytics has reshaped organizational practices, enabling real-time data collection, analysis, and decision-making in supply chain management (SCM) and marketing. Through semi-structured interviews with 25 professionals, including supply chain managers, marketing executives, and IT specialists, insights were gathered into the adoption, integration, and impact of digital technologies within organizational contexts. Key findings highlight IoT's contribution to enhancing supply chain visibility, predictive maintenance, and operational efficiency through continuous monitoring and data-driven insights. AI technologies support demand forecasting, inventory optimization, and personalized marketing strategies, improving customer engagement and satisfaction. Blockchain enhances supply chain transparency, traceability, and security, reducing risks associated with fraud and ensuring compliance with regulatory standards. Advanced analytics provide organizations with actionable insights into consumer behavior and market trends, guiding strategic decision-making and optimizing marketing campaigns. Despite these benefits, organizations face challenges such as technological complexity, integration issues, data privacy concerns, and organizational resistance to change. Strategic planning, leadership support, and investment in digital infrastructure are essential for overcoming these challenges and maximizing the potential of digital technologies. Future research directions include exploring sustainability initiatives in digital SCM, advancing AI-driven analytics, and understanding digital transformation in emerging markets.

This study investigates green logistics strategies adopted by businesses to enhance sustainability within their supply chains, particularly focusing on reducing carbon footprints and environmental impacts associated with transportation and distribution activities. Through qualitative analysis and interviews with supply chain managers, industry experts, and sustainability officers, this research provides insights into motivations, strategies, challenges, and benefits related to green logistics practices. Key findings highlight the critical role of aligning green logistics with corporate sustainability goals. Advanced technologies such as telematics, GPS tracking, and data analytics are instrumental in optimizing transportation routes, reducing fuel consumption, and minimizing emissions. Additionally, strategies like using eco-friendly vehicles, energy-efficient warehouse operations, and implementing reverse logistics are identified as effective means to mitigate environmental impacts. Collaboration and partnerships with suppliers, logistics providers, and stakeholders are essential for sharing best practices and fostering joint initiatives. Despite benefits such as cost savings and enhanced corporate reputation, challenges include high initial investments, the absence of standardized metrics for environmental impact, and regulatory complexities. However, regulatory compliance also acts as a driver for green logistics adoption and presents opportunities for improving sustainability performance. The integration of sustainability goals with logistics strategies underscores the interdisciplinary nature of sustainable supply chain management. This holistic approach encompasses aspects of entrepreneurship, emotional intelligence, marketing, and supplier relationship management.

In today's globalized economy, supply chain disruptions present significant challenges, impacting businesses' operational continuity and efficiency. This study delves into the ways businesses navigate these disruptions, with a particular emphasis on qualitative insights into risk management practices. The complexity and interconnectivity inherent in modern supply chains make them vulnerable to a broad spectrum of disruptions, ranging from natural disasters and geopolitical conflicts to technological failures and pandemics. Effective supply chain risk management requires a structured approach to identifying potential risks, evaluating their likelihood and potential impact, and formulating robust mitigation strategies. Employing a qualitative research methodology, this study gathers in-depth insights from semi-structured interviews with supply chain managers, industry experts, and executives. The findings underscore the necessity of proactive risk identification and comprehensive assessment processes. Advanced technologies, including artificial intelligence (AI), the Internet of Things (IoT), and blockchain, are highlighted as crucial tools for enhancing visibility and responsiveness within supply chains. Strategies such as diversifying suppliers and maintaining safety stock emerge as vital components of risk mitigation, ensuring supply continuity in the face of disruptions. Strong relationships with suppliers are pivotal, facilitating better information sharing and collaborative problem-solving. Leadership commitment to risk management and fostering a culture of resilience within organizations is also critical. Training programs and simulation exercises are identified as effective means of preparing employees to handle disruptions. Furthermore, adherence to regulatory compliance and a focus on sustainability are integral to maintaining long-term stability and reducing the risk of future disruptions.

Introduction: Gastric cancer (GC) is one of the most frequently diagnosed cancers in the world. Although the incidence is decreasing in developed countries, treatment results are still unsatisfactory. The standard treatment for locally advanced gastric cancer (LAGC) is gastrectomy with perioperative chemotherapy. Aim: Assessment of selected microRNAs (miRNAs) in chemoresistance in archival material from LAGC. Material and method: The research group consisted of archival material from 10 patients with LAGC. Histological material from each patient was used from a biopsy performed during gastroscopy and after surgery preceded by 4 cycles of neoadjuvant chemotherapy (NAC) according to the FLOT or FLO regimen. The expression of selected miRNAs was assessed in the tissue material, such as miRNA-21-3p, miRNA-21-5p, miRNA-106a-5p, miRNA-122-3p, miRNA-122-5p, miRNA-143-3p, miRNA-143-5p, miRNA-203a-3p, miRNA-203-5p, miRNA-551b-3p, miRNA-551b-5p and miRNA-574-3p. miRNA expression was assessed by quantitative chain reaction polymerase reverse transcriptase (qRT-PCR). The response to NAC was assessed by computed tomography of the abdomen, chest and histopathology after gastrectomy. The statistical analyses were performed using GraphPad Prism 9.The significance limit was set at p

Diabetes mellitus (DM) is the most common metabolic disease in humans, and its prevalence is increasing worldwide in parallel with the obesity pandemic. A lack of insulin or insulin resistance, and consequently hyperglycemia, leads to many systemic disorders, among which diabetic encephalopathy (DE) is a long-term complication of the central nervous system (CNS), characterized by cognitive impairment and motor dysfunctions. The role of oxidative stress and neuroinflammation in the pathomechanism of DE has been proven. Fractalkine (CX3CL1) has unique properties as an adhesion molecule and chemoattractant, and by acting on its only receptor, CX3CR1, it regulates the activity of microglia in physiological states and neuroinflammation. Depending on the clinical context, CX3CL1-CX3CR1 signaling may have neuroprotective effects by inhibiting the inflammatory process in microglia or, conversely, maintaining/intensifying inflammation and neurotoxicity. This review discusses the evidence supporting that the CX3CL1-CX3CR1 pair is neuroprotective and other evidence that it is neurotoxic. Interrupting the vicious cycle within neuron-microglia interactions may be a therapeutic goal in DE by limiting the inflammatory response.

In this paper, we perform the neural cryptanalysis and comprehensively analyze five block ciphers, Data Encryption Standard (DES), Simplified DES (SDES), Advanced Encryption Standard (AES), Simplified AES (SAES), and SPECK. The vulnerability of the block ciphers is investigated in three different attacks, such as Encryption Emulation (EE), Plaintext Recovery (PR), Key Recovery (KR), and Ciphertext Classification (CC) attacks. For the plaintexts, randomly generated block-sized bit arrays and texts are used. The block ciphers apply different numbers of round functions in the encryption of the block-sized bit arrays, and they are investigated by using the deep learning models trained with different numbers of data in EE, PR, and KR attacks. Moreover, the block ciphers use two different text encryption methods, Word-based Text Encryption (WTE) and Sentence-based Text Encryption (STE), to encrypt the texts in various operation modes, and they are analyzed with deep learning models in EE, PR, and CC attacks. As a result, the block ciphers can be vulnerable to deep learning-based EE and PR attacks using a large amount of train data, and STE can improve the strength of the block ciphers, unlike WTE, which shows almost the same classification accuracy as the plaintexts, especially in CC attack. Additionally, when the keys that are the same as the plaintexts are used in encryption, the block ciphers can be perfectly broken in KR attack. Moreover, especially in KR attack, the RNN-based deep learning model shows higher average Bit Accuracy Probability (BAPavg) than the fully connected-based deep learning model, which is used more often in previous works of neural cryptanalysis. Furthermore, although the transformer-based deep learning model is a state-of-the-art model in Natural Language Processing (NLP), the RNN-based deep learning model is more suitable for CC attack and shows higher classification accuracy.

Aim: We estimated the correlation between serum bilirubin concentrations and insulin resistance in advanced maternal age without diabetes mellitus. Method: The cross-sectional study involved consecutive 50 women of advanced maternal age without diabetes mellitus, and insulin resistance (IR) was diagnosed according to the homeostatic model assessment insulin resistant (HOMA-IR) formula and the cut-off point was set to more than 2.5. Serum bilirubin and HOMA-IR were compared between the IR (+) and IR (-) groups. Results: We found that serum bilirubin levels in the IR subjects were significantly decreased compared to those without IR (p = 0.0252). Serum bilirubin concentrations were negatively correlated with the weight and the fasting insulin concentrations in all subjects (r=−0.282, p=0.047, r=-0.424, p=0.002). Additionally, serum bilirubin had a negatively correlation with HOMA-IR (r = -0.410, p = 0.003) in all subjects. The multiple linear regression analysis found that serum total bilirubin levels were independently correlated with HOMA-IR (beta = -0.392, p= 0.015) in these subjects. Conclusions: The study demonstrated that serum bilirubin concentrations had negatively correlation with insulin resistance in advanced pregnant women without diabetes mellitus, and decreased serum bilirubin may forebode increased gestational diabetes mellitus risk in our study population.

The increasing emergence of multidrug resistant (MDR) pathogens causes difficult-to-treat infections, with long-term hospitalizations and high incidence of death, thus representing a global public health problem. To manage MDR bacteria bugs, new antimicrobial strategies are necessary, and their introduction in practice is a daily challenge for scientists in the field. An extensively studied approach to treat MDR infections consists in inducing high levels of reactive oxygen species (ROS) by several methods. Although further clinical investigations are mandatory on the possible toxic effects of ROS to mammalian cells, clinical evaluations are extremely promising, and their topical use to treat infected wounds and ulcers, also in presence of biofilm, is already clinically approved. Biochar (BC) is a carbonaceous material obtained by pyrolysis of different vegetable and animal biomass feedstocks, at 200−1000 °C in limited presence of O2. Recently, it has been demonstrated that BC capability of removing organic and inorganic xenobiotics is mainly due to the presence of persistent free radicals (PFRs), which can activate oxygen, H2O2 or persulfate in the presence or not of transition metals by electron transfer thus generating ROS, which in turn degrade pollutants by advanced oxidation processes (AOPs). In this context, the antibacterial effects of BC containing PFRs have been demonstrated by some authors against Escherichia coli and Staphylococcus aureus, thus giving birth to our idea of the possible use of BC-derived PFRs as a novel method capable of inducing ROS generation for antimicrobial oxidative therapy. Here, the general aspects concerning ROS physiological and pathological production and regulation, and the mechanism by which they could exert antimicrobial effects have been reviewed. The methods currently adopted to induce ROS production for antimicrobial oxidative therapy have been discussed. Finally, for the first time, BC-related PFRs have been proposed as a new source of ROS for antimicrobial therapy via AOPs.

Introduction. “Vein definition” for locally advanced pancreatic ductal adenocarcinoma (LA PDAC) assumes portal-to-superior mesenteric vein (PV/SMV) unreconstructability due to tumor involvement or occlusion. Radical pancreatectomies with SMV resection without PV/SMV reconstruction are scarcely discussed in the literature. Retrospective analysis of 19 radical pancreatectomies for “low” LA PDAC with SMV and all its tributaries resection without PV/SMV reconstruction has shown zero mortality, overall morbidity – 56%, Dindo-Clavien – 3-10,5%, R0- rate – 82%, mean operative procedure time – 355±154 min, mean blood loss – 330±170 ml, delayed gastric emptying– 25%, clinically relevant postoperative pancreatic fistula – 8%. In three cases surgery was associated with superior mesenteric (n2) and common hepatic artery (n1) resection. Surgery was completed without vein reconstruction (n13) and with inferior mesenteric-to-splenic anastomosis (n6). There were no cases of liver, gastric, or intestinal ischemia. A specific complication of the SMV resection without reconstruction was 2-3 days-long intestinal edema (48%). Median overall survival – 25 months, median progression-free survival – 18 months. All the relapses, except two, were distant. The possibility of successful SMV resection without PV/SMV reconstruction can be predicted before surgery by CT-based reconstructions. The mandatory anatomical conditions for the procedure were: 1) preserved SMV-SV confluence; 2) occluded SMV for any reason (tumor or thrombus); 3) well-developed inferior mesenteric vein collaterals with dilated intestinal veins; 4) no right-sided vein collaterals, and 5) no varices in the upper abdomen. Conclusion: “Low” LA PDACs involving SMV with all its tributaries can be radically and safely resected in highly and specifically selected cases without PV/SMV reconstruction with an acceptable survival rate.

Advanced glycation end-products (AGEs) form through non-enzymatic glycation of various proteins. Optic nerve degeneration is a frequent complication of diabetes, and retinal AGEs accumulation is strongly linked to diabetic retinopathy development. Type 2 diabetes mellitus (T2DM) is a major risk factor for Alzheimer's disease (AD), with patients often exhibiting optic axon degeneration in the nerve fiber layer. Notably, a gap exists in our understanding of how AGEs contribute to neuronal degeneration in the optic nerve within the context of both diabetes and AD. Our previous work demonstrated that glyceraldehyde (GA)-derived toxic advanced glycation end-products (TAGE) disrupt neurite outgrowth through TAGE-β-tubulin aggregation and tau phosphorylation in neural cultures. In this study, we further illustrated GA-induced suppression of optic nerve axonal elongation via abnormal β-tubulin aggregation in mouse retinas. Elucidating this optic nerve degeneration mechanism holds promise for bridging the knowledge gap regarding vision loss associated with DM and AD.

In the face of the burgeoning electricity demands and the imperative for sustainable development amidst rapid industrialization, this study introduces a dynamic and adaptable framework suitable for policy-makers and renewable energy experts working on integrating and optimizing renewable energy solutions. While using a case study representative model for Sub-Saharan Africa (SSA) to demonstrate the challenges and opportunities present in introducing optimization methods to bridge power supply deficits and the scalability of the model to other regions, this study presents an agile multi-criteria decision tool that pivots on four key development phases, advancing upon established methodologies and pioneering refined computational techniques, to select optimal configurations from a set of Policy Decision Making Metrics (PDM-DPS). Central to this investigation lies a rigorous comparative analysis of variants of three advanced algorithmic approaches: Swarm-Based Multi-objective Particle Swarm Optimization (MOPSO), Decomposition-Based Multi-objective Evolutionary Algorithm (MOEA/D), and Evolutionary-Based Strength Pareto Evolutionary Algorithm (SPEA2). These are applied to a grid-connected hybrid system, evaluated through a comprehensive 8760-hour simulation over a 20-year planning horizon. The evaluation is further enhanced by a set of refined Algorithm Performance Evaluation Metrics (AL-PEM) tailored to the specific constraints. The findings not only underscore the robustness and consistency of the SPEA2 variant over 15 runs of 200 generations each, which ranks first on the AL-PEM scale but also validate the strategic merit of combining multiple technologies and empowering policymakers with a versatile toolkit for informed decision-making.

This article explores the cutting-edge advancement of gypsum and cement building boards infused with shape-stabilized n-octadecane, an organic phase change material (PCM). The primary focus is on improving energy efficiency and providing electromagnetic interference (EMI) shielding capabilities for contemporary buildings. The research investigates the integration of these materials into construction materials, using red-mud Carbon Foam as a stabilizer for n-octadecane (OD@CCF). Various analyses, including microstructural examination, porosity assessment, and additive dispersion, were conducted using X-ray microtomography and density measurements. Thermal conductivity measurements demonstrated the enhancement of composite boards as the OD@CCF content increased, while mechanical tests indicated an optimal additive content of up to 20%. The thermal-regulated capabilities of these advanced panels were evaluated in a custom-designed room model equipped with a homemade environmental chamber, illustrating a consistent temperature environment during heating and cooling cycles. The incorporation of OD@CCF into cement boards exhibited improved thermal energy storage properties. Moreover, the examined composite boards displayed efficient electromagnetic shielding performance within the frequency range of 3.2–7.0 GHz, achieving EMI values of approximately 18 and 19.5 dB for gypsum and cement boards, respectively, meeting the entry-level value required for commercial applications.

Non-Small Cell Lung Cancer (NSCLC) is the most common pulmonary malignancy, most frequently diagnosed at an advanced stage (III/IV). Patients in the Locally-Advanced Stage Subgroup (IIIA) are relatively few, yet compose of heterogenic phenotypes posing a diagnostic and treating challenge, leading to lack of clinical guidelines regarding the optimal standard of care. Several approaches exist, with a general agreement that a combined oncological and surgical modality approach is required. In this current retrospective descriptive study, operable Stage IIIA NSCLC patients who underwent surgery between 2013-2020 were evaluated on several aspects, including initial diagnosis, neoadjuvant regimens, outcomes of surgical intervention, overall survival at 2-years and 5-years following treatment. A total of 35 patients had neoadjuvant oncological treatment (mostly chemoradiation therapy) prior to surgery, out of which 28 patients were diagnosed with Stage IIIA NSCLC. In post-operative assessment of pathological staging, downstaging was reported in 20 patients, of which 7 (25%) cases were defined as complete pathological response. The 2-years overall survival rate was 65% and the 5-years overall survival rate was 60%. The main pattern of disease recurrence was distant metastasis.

Introduction: Identifying the complexity of palliative care needs is a key aspect of referral to specialised multidisciplinary early palliative care (EPC) teams. The PALCOM scale is an instrument consisting of five multidimensional assessment domains, developed in 2018 and validated in 2023, to identify the level of complexity in patients with advanced cancer. Objectives: The main objective of this study was to determine the degree of instability (likelihood of level change or death), health resource consumption and survival of patients according to the level of palliative complexity assigned at the baseline visit during a 6-month follow-up. Method: An observational, prospective, multicentre study was conducted using pooled data from the development and validation cohort of the PALCOM scale. The main outcome variables were: a) instability ratio (IR), defined as the probability of level change or death; b) emergency department visits; c) days of hospitalisation; d) hospital death; e) survival. All variables were analysed monthly according to the level of complexity assigned at the baseline visit. Results: A total of 607 patients with advanced cancer were enrolled. According to the PALCOM scale, 20% of patients were classified as low complexity, 50% as medium and 30% as high complexity. The overall IR was 45% in the low complexity group, 68% in the medium complexity group and 78% in the high complexity group (p

Cardiomyopathies (CMPs) are a group of myocardial disorders that are characterized by structural and functional abnormalities of the heart muscle. These abnormalities occur in the absence of coronary artery disease (CAD), hypertension, valvular disease, and congenital heart disease. CMPs are an increasingly important topic in the field of cardiovascular diseases due to the complexity of their diagnosis and management. In 2023, the ESC guidelines on cardiomyopathies were first published, marking significant progress in the field. The growth of techniques such as cardiac magnetic resonance imaging (CMR) and genetics has been fueled by the development of multimodal imaging approaches. For the diagnosis of CMPs, a multimodal imaging approach, including CMR, is recommended. CMR has become the standard for non-invasive analysis of cardiac morphology and myocardial function. This document provides an overview of the role of CMR in CMPs, with a focus on tissue mapping. CMR enables the characterization of myocardial tissues and the assessment of cardiac functions. CMR sequences and techniques, such as late gadolinium enhancement (LGE) and parametric mapping, provide detailed information on tissue composition, fibrosis, edema, and myocardial perfusion. These techniques offer valuable insights for early diagnosis, prognostic evaluation, and therapeutic guidance of CMPs. The use of quantitative CMR markers enables personalized treatment plans, improving overall patient outcomes. This review aims to serve as a guide for the use of these new tools in clinical practice.

Background: Locally advanced rectal cancers (10-20%) can present with infiltration into adjacent viscera. R0 resections remain the key factor for better survival. Traditionally these cases have been managed with open surgery. There are some limitations of laparoscopic surgery in these case, which can potentially be overcome by robotic surgery. Objectives: To determine the feasibility and outcome results of robotic multi-visceral resection of stage T4 rectal carcinoma. Methods: Consecutive patients having locally advanced carcinoma of rectum, who undergone robotic multi-visceral resection as the primary treatment between 2015 -2018 were included, through our database which was maintained prospectively. All perioperative and intraoperative parameters were analyzed. Patient demographics, co-morbidities, preoperative imaging, endoscopic findings, operative data, histopathology results, postoperative hospital course and procedure related postoperative adverse events were noted and analyzed. Results: Twenty-one patients with the diagnosis of nonmetastatic locally advanced rectal cancers were operated with Robotic Si/X platform. The median body mass index was 28.5 kg/m2 (range 21-42). The mean blood loss during operation was 20 ml (range 5-200), and the mean duration of surgery was 280 min (range 240-430). The median hospital stay after operation was 6 days (range 4-25 days). On postoperative histopathology, R0 resection rate was 90.5% (19/21). Conclusions: The robotic multi-visceral en-bloc resection of stage T4 rectal carcinoma is technically feasible and oncologically safe. Advanced technical skills, accurate radiological staging and careful patient selection can allow the extension of minimal access surgery to this challenging group of patients.

In this case series, we examine the impact of the Titan-iR Pro® deep spectrum biotherapeutic device on brain function in healthy individuals. Here we present 15 participants, aged 26-68 years, who enrolled in this open-label study, designed to assess the effect of a single 15-minute course of deep spectrum biotherapy on brain function. Although symptom-free upon enrollment, participants had diverse medical histories with some displaying early signs of cognitive decline. As part of the evaluation, all participants engaged in electroencephalogram (EEG) recording sessions that focused on assessing event-related potential (ERP) evaluations, including audio P300 amplitudes and latencies (speeds), neurocognitive testing, and physical reaction times. Following the Titan-iR Pro intervention an improvement in EEG-based cognitive markers was observed. These results underscore the importance of further investigation into the potential of advanced and deep spectrum photobiomodulation in the prevention and treatment of cognitive decline and other neurological disorders.

Vision impairment may delay responses to hazards when driving. In a proof-of-concept driving simulator study, we evaluated a hazard warning device designed for vision impaired drivers. Three groups participated: 11 persons with central vision loss (CVL; median age 60 years), 12 with homonymous field loss (HFL; 52 years) and 11 with normal vision (NV; 60 years). CVL is characterised by impaired visual acuity and contrast sensitivity while HFL is a loss of vision in the same half of the visual field (blind side) in both eyes. Participants completed drives with and without the device which gave a directional vibro-tactile warning for an approaching pedestrian hazard when collision risk exceeded a pre-defined threshold. Warnings significantly (p< 0.001) reduced brake response times for CVL (∆= 0.54s) and HFL (∆= 0.30s), but not NV participants. For HFL participants, the reduction was greater (p = 0.02) for hazards on the blind (∆= 0.57s) than seeing side (∆= 0.10s). The warnings significantly reduced collision rates for CVL participants from 11 to 0% (all hazards) and for HFL participants from 30 to 1.7% (blind side hazards). Thus, hazard warnings may be beneficial in improving safety of vision impaired drivers; further research is warranted.

This comprehensive review traces the transformative journey of genomic mapping, ushering in the era of "Genomic Atlas 2.0," characterized by advanced strategies and cutting-edge technologies. Beginning with a historical overview, it highlights the evolution from early linkage analysis to the current landscape shaped by high-throughput sequencing. Key breakthroughs are emphasized, showcasing the pivotal role of platforms such as Illumina and Oxford Nanopore in accelerating the identification of genetic variations. Long-read sequencing technologies, including PacBio and Oxford Nanopore, are explored as transformative elements overcoming limitations associated with short-read sequencing. The review delves into spatial genomics and chromatin conformation capture techniques, revealing the three-dimensional intricacies of the genome, with a particular focus on the revolutionary impact of Hi-C in understanding chromatin interactions. CRISPR technologies emerge as indispensable tools in Genomic Atlas 2.0, enabling targeted genome editing and the generation of precise genetic models. Functional genomics screens, utilizing RNA interference and CRISPR-based techniques, are discussed for their scalable precision in deciphering genome functions. Navigating challenges, the review addresses complexities in data integration and ethical considerations, offering strategies to ensure the robustness and ethical conduct of genetic mapping. Looking optimistically towards the future, it explores opportunities such as improved sequencing accuracy and novel applications of CRISPR technologies. Envisioning the expansion of genomics into personalized medicine, agriculture, and conservation biology, the review serves as a guiding resource for researchers, scientists, and students navigating the intricate terrain of Genomic Atlas 2.0.

Cellular Technology came into existence in Japan in 1979. From that time, we have seen many advances in technology. Currently, most of the person uses either 4G or 5G, among which 5G is a newer technology. 4G network was the first network to use LTE. LTE stands for Long Term Evaluation. Most people get confused between 4G and LTE, they assume both to be the same. In reality, LTE has evolved on the 4G technology. It was first introduced in 2008 to provide higher efficiency and data rates to the cellular network. It was designed to evolve the performance of the networks which includes the evolution of hardware components, optimization of software, power and cost efficiency. This work presents a study on LTE, LTE-A and VoLTE technology. We also discussed about the several packet scheduling algorithms that are being used for transmission of packets. It brings out new opportunities for the researchers to work on increasing the efficiency of those algorithms by modifications.

Advanced glycation end products (AGEs) play a significant role in the aging processes, further regarding as a hallmark of aging. Despite the importance, a lack of monitoring tools has hampered the study of relationship between AGEs and aging. Here, we firstly report a novel AGEs-selective probe, AGO. AGO presented its ability to detect AGEs more sensitively than a conventional approach of measuring autofluorescence from AGEs. In addition, we confirmed that AGO can detect AGEs depending on kinetics, reflecting by a preference to ribose-derived AGEs. Finally, AGO revealed its competence to visualize glycation products in glycation mimicking model, made by collagen framework. We believe that this study will enrich molecular toolboxes to understand physiological processes of AGEs during aging processes.

Among natural disasters, earthquakes have a considerable impact and are among the ten deadliest, with an extreme impact on the healthcare sector. This study aimed to analyze best practices in nursing care for earthquake victims. An in-depth analysis was carried out by using a scoping review, a method used in accordance with the PRISMA-ScR recommendations to identify best nursing practice in these circumstances based on searches of eight databases: MEDLINE via PubMed; Cochrane Library; Embase; VHL; PDQ-Evidence; Scopus; ProQuest; Google Scholar. Twenty-one studies were selected. The nursing practices identified were grouped into two distinct dimensions, each subdivided into four subcategories: (i) care practices: a) immediate care, b) intermediate care, psychosocial care and d) ethical care; (ii) care management and coordination practices, which cover (a) care coordination, (b) victim care network organization, (c) teamwork and (d) training. By analyzing these nursing practices during care and relief operations for earthquake victims, this study identified the various actions carried out, the nursing skills to be developed and the reinforcement of these advanced practices through the systematization of nurses’ skills, in order to promote victims’ rehabilitation, minimize their suffering and improving their quality of life during and after an earthquake.

Synchronous electrical cardioversion is a relatively common procedure in the emergency department (ED), often performed for unstable supraventricular tachycardia (SVT) or unstable ventricular tachycardia (VT). However, it is also used for stable cases resistant to drug therapy, which carry a risk of deterioration. In addition to the inherent risks linked with procedural sedation, there is a possibility of malignant arrhythmias or bradycardia, which could potentially result in cardiac arrest following this procedure. Here, we present a case of complete heart block unresponsive to transcutaneous pacing and positive inotropic and chronotropic drugs for 90 minutes, resulting in multiple cardiac arrests. The repositioning of the transcutaneous cardio-stimulation electrodes, one of them placed in the left latero-sternal position and the other at the level of the apex, led to immediate stabilization of the patient. Extubation of the patient was performed the following day, while full recovery and discharge within 7 days, after insertion of a permanent pacemaker.

The per capita availability of freshwater resources on a global scale is gradually decreasing due to population growth, rapid urbanization, industrialization, and modern lifestyles. In this situation, wastewater management becomes a major concern. Conventional treatment processes used to treat wastewater discharges are not adequate for the advanced removal of pollutants, especially refractory organic pollutants, which are mainly organic compounds that are not easily biodegradable in the environment. The use of photocatalytic membrane reactors (PMRs) for tertiary wastewater treatment has attracted much interest in recent periods, and various configurations have been investigated. The performance of a PMR using an iron doped titanium photo catalyst and Polysulfone-based polymeric membrane for municipal wastewater treatment was evaluated under natural and simulated solar light. Obtained results proved that solar driven PMRs can remove organic loading (COD) with high efficiencies and may represent a suitable alternative for the tertiary treatment step of municipal wastewater.

Background: A challenge in locally advanced, unresectable pancreatic cancer treatment is to achieve both survival benefits and a safe margin-negative resection. There is no robust evidence regarding the treatment of patients with unresectable pancreatic cancer. Methods: We conducted a prospective, single-arm, phase II trial in patients with unresectable pancreatic cancer using the FOLFIRINOX regimen. After completing 4–8 cycles, patients underwent surgical resection when feasible. The primary endpoint was the R0 resection rate. Results: Fifteen patients were enrolled in this study. This study was terminated without reaching the prespecified accrual target due to low accrual rate. A median of six courses of FOLFIRINOX chemotherapy was administered, and a partial response or R0 resection was achieved in 26.7% or 33% of the patients, respectively. Se-vere adverse events due to chemotherapy and major surgical complications were observed in 33.3% and 6.7% of patients, respectively. The median overall survival rate of patients who un-derwent R0 resection or with R1 or unresectable disease was 47.8 months (95% CI, 22.5–73.1) or 14.5 months (95% CI, 11.8–17.2), respectively (P=0.031). Conclusions: Well-selected patients with URLA-PC treated with FOLFIRINOX achieved a relatively high rate of R0 resection and had pro-longed survival. Therefore, induction FOLFIRINOX is feasible and well-tolerated for locally ad-vanced, initially unresectable pancreatic cancer, and may be effective in facilitating R0 resection and prolonging survival. This should be further assessed in future randomized multicenter trials.

This study conducts a comprehensive review of the integration of Hybrid Electric Turbochargers in mass-produced road vehicles. The primary objective is to inform the readers about the potential advantages and innovative applications of HETs. Employing a SWOT analysis, the research compares the performance of HETs on thermal engines versus traditional turbochargers and HETs on thermal engines versus HETs on hybrid engines based on a synthesis of multiple research findings. The study elucidates the fundamental mechanics of turbochargers, emphasizing their inherent benefits. Additionally, it introduces a novel approach with the integration of the hy-brid-electric turbocharger, demonstrating its capacity, supported by practical examples. The in-corporation of turbochargers with energy recovery mechanisms, including HETs, is shown to significantly contribute to emissions reduction. Moreover, the electric drive facilitates the utili-zation of hybrid turbines, particularly on low-displacement engines, resulting in enhanced effi-ciency, torque, and liter power. In conclusion, the research underscores the potential of HETs to substantially mitigate the environmental impact of the transportation sector by reducing emis-sions and conserving energy. Their ability to optimize the fuel efficiency and power output of internal combustion engines, coupled with the feasibility of downsized engines, positions HETs as an attractive option for both manufacturers and consumers. However, it is acknowledged that the implementation of HETs is in its early stages, necessitating further research to comprehensively understand their environmental impact. Despite this, the promising positive impact on the en-vironment designates HETs as a technology deserving close attention in the forthcoming years.

The thick functionally graded material (FGM) circular cylindrical shells with advanced varied shear correction coefficient and third-order shear deformation theory (TSDT) under advanced thermal vibration are studied by the method of generalized differential quadrature (GDQ). The coefficient of displacement model of TSDT is applied to derive the equations of motion for the thick FGM circular cylindrical shells. The stiffness in simpler forms of thick FGM circular cylindrical shells and temperature rise in linear expression of the heat conduction equation are used. The differential equations in dynamic equilibrium state of thick FGM circular cylindrical shells can be obtained and rewritten into displacements and shear rotations in partial derivative expressions under dynamic thermal loads in partial derivative expressions. Parametric effect studies including advanced nonlinear varied shear correction coefficient, nonlinear coefficient c1 value, power law index and thermal temperature difference of external heating loads on the displacements and stresses of thick FGM cylindrical shells under thermal dynamic vibration are investigated.

Introduction: Advanced glycation end-products (AGEs) may play a relevant role as inducers in the chronic inflammatory pathway present in immune-mediated diseases, such as systemic lupus erythematosus (SLE). AGEs concentrations have been associated, with discrepant results to date, with some parameters such as disease activity or accrual damage, suggesting their potential usefulness as biomarkers of the disease. Objectives: To confirm differences in AGEs levels measured by cutaneous autofluorescence between SLE patients and healthy controls (HC) and study their correlation with various disease parameters. Methods: Cross-sectional study, where AGEs levels were measured by skin autofluorescence, and SLE patients’ data were compared with those of sex- and age-matched HC in a 1:3 proportion through a multiple linear regression model. Correlations of AGEs levels with demographic and clinical data were analyzed through ANOVA tests. Both analyses were adjusted for confounders. Results: AGEs levels in SLE patients were significantly higher than in HC (p<0.001). We found statistically significant positive correlation with SLE disease activity index (SLEDAI) and damage index (SDI), physician and patient global assessment, C-reactive protein, leukocyturia, complement C4, IL6 and oral ulcers. We also found a negative statistically significant correlation with current positivity of anti-nuclear and anti-Ro60 antibodies. Conclusions: AGEs seem to have a role in LES pathophysiology, becoming a new management and prognosis biomarker in this disease. The association with specific antibodies and disease manifestations may indicate a specific clinical phenotype related to higher AGEs levels.

Abstract: Cervical cancer, which is the fourth most common malignancy and the fourth greatest cause of cancer-related deaths in women globally, continues to be a serious issue for global health. Despite advancements in treatment techniques, particularly the implementation of concomitant chemoradiation therapy, predicting the prognosis of locally advanced cervical cancer, especially for stage III, remains challenging. In recent years, neoadjuvant chemotherapy (NACT) has gained interest as a viable treatment strategy. The objective of this review paper is to scrutinize the clinical data and outcomes associated with NACT in the management of stage 3 cervical cancer. Electronic databases were used to perform a comprehensive literature search, and research up to 2023 were included. The findings suggest that NACT followed by irradiation may have advantages such as lowering tumor size, pelvic architectural distortion, and subclinical distant metastases, therefore enhancing radiation delivery. However, several studies have produced conflicting findings, raising questions regarding toxicity and finding no appreciable survival benefit over radiation alone. NACT followed by radical surgery has demonstrated more promising outcomes compared to surgery alone in terms of increasing rates of overall survival (OS) and progression-free survival (PFS). Additionally, NACT has been associated with decreased tumor growth, parametrial infiltration, nodal, metastases, and vascular space invasion. These findings suggest adjuvant radiation treatment. Although the overall survival rate has been markedly increased by concomitant chemoradiation treatment, metastatic disease continues to be a major factor in the death rate from cervical cancer. Therefore, improving outcomes in locally advanced cervical cancer requires investigating novel systemic treatments, such as NACT. The study also emphasizes how crucial it is to research factors like cisplatin dose-intensity and cycle lengths in order to maximize NACT's efficacy. To prevent the need for subsequent treatments and cumulative toxicity, more study should concentrate on patient selection for NACT followed by surgery.

This study proposes a methodology for identifying time intervals in which time-of-use (ToU) energy tariffs can be set. This is achieved by analyzing the variability in electric power demand and esti-mating the potential for demand flexibility. The proposed methodology is as follows: first, data preprocessing is performed, focusing on the organization and cleaning of individual consumption records. Subsequently, the data are processed and classified by using consumption variability analysis and clustering techniques. Then, representative clusters are selected and time intervals are analyzed to identify periods of high electric power consumption variability. This methodology was tested with real data from smart meters in the Colombian electrical system, in which time intervals with potential for settinh ToU tariffs were ultimately identified. This work promotes the implementation of demand response strategies that enhance sustainability and facilitate the transition to a more resilient energy landscape both nationally and internationally. The findings are expected to contribute to the formulation of tariff schemes that encourage con-scious changes in electric energy consumption patterns.

Abstract: This review addresses the complexities of type 1 diabetes (T1D)and its associated complications, with a par-ticular focus on diabetic retinopathy (DR). This review outlines the progression from non-proliferative to proliferative diabetic retinopathy and diabetic macular edema, highlighting the role of dysglycemia in the pathogenesis of these conditions. A significant portion of the review is devoted to technological advances in diabetes management, particu-larly the use of Hybrid Closed Loop systems (HCLS) and to the potential of open-source HCLS systems, which could be easily adapted to different patiens’needs using big data analytics and machine learning. Personalized HCLS algorithms that integrate factors such as patient lifestyle, dietary habits, and hormonal variations are highlighted as critical to reducing the incidence of diabetes-related complications and improving patient outcomes.

Among the sensors necessary to equip vehicles with an autonomous driving system, there is a tacit agreement that cameras and some type of radar would be essential. The ability of radar to spatially locate objects (pedestrians, other vehicles, street furniture and traffic signs) makes it the most economical complement to the cameras in the visible spectrum, in order to give the correct depth to scenes. From the echoes obtained by the radar, some data fusion algorithm will try to locate each object in its correct place within the space surrounding the vehicle. In any case, the usefulness of the radar will be determined by several performance parameters, such as its aver-age error in distance, the maximum errors and the number of echoes per second it can provide. In this work we have tested experimentally the AWR1843 MIMO radar from Texas Instruments to measure those parameters.

Human Platelet lysate, a hemoderivative product rich in growth factors, holds significant promise in tissue engineering and regenerative medicine. However, its practical utility in liquid or gel form is hampered by challenges such as limited stability and handling difficulties. This study aimed to engineer dry and porous aerogels from platelet lysate hydrogel using an environmen-tally friendly supercritical CO2-based shaping process customized for tissue engineering appli-cations. The resulting aerogels demonstrated remarkable mechanical robustness and improved manageability. Notably, they exhibited a high-water absorption capacity. Moreover, these aer-ogels exhibited a sustained and favourable biological response in-vitro. They demonstrated the ability to release functional growth factors, sustaining cellular metabolic activity similar to that of conventional culture conditions, even after prolonged storage. Furthermore, they supported the adhesion and proliferation of murine fibroblasts (BALB-3T3) and the migration of Human Um-bilical Vein Endothelial Cells (HUVEC). In addition to serving as excellent matrices for cell culture, these proposed aerogels also function as efficient growth factor delivery systems. This multi-functional capability positions them as promising candidates for various tissue regeneration strategies. Importantly, the elaborated aerogels can be conveniently stored and considered as ready-to-use products, enhancing their practicality and applicability in regenerative medicine

The incidence and mortality of cervical cancer are high in Romania compared to other European countries, particularly for locally advanced cervical cancer cases, which are predominant at the time of diagnosis. Widely accepted therapeutic guidelines indicate that the treatment for locally advanced cervical cancer consists of concurrent chemoradiotherapy (total dose 85-90Gy at point A), with surgery not being necessary as it does not lead to improved survival and results in significant additional morbidity. In Romania, the treatment for locally advanced cervical cancer differs, involving lower-dose chemotherapy (total dose 60-65Gy at point A), followed by surgery which, under these circumstances, ensures better local control. In this regard, we attempted to evaluate the role and necessity of surgery in Romania, considering that in our study, residual lesions were found in 55.84% of cases on resected specimens, especially in cases with unfavorable histology (adenocarcinoma and adenosquamous carcinoma). This type of surgery was associated with significant morbidity (28.22%) in our study. The recurrence rate was 24.21% for operated patients compared to 62% for non-operated patients receiving suboptimal concurrent chemotherapy alone. In conclusion, In Romania, surgery will continue to play a predominant role until radiotherapy achieves the desired effectiveness for local control.

Locally Advanced Breast Cancer (LABC) is a complex disease that requires a multidisciplinary approach. Neoadjuvant Chemotherapy (NAC) is usually performed in order to achieve loco-regional radical resection; although its importance in the multidisciplinary approach to LABC is well recognised, a small number of patients show Progressive Disease (PD). No standard Salvage Treatment (ST) has been defined and different strategies can be adopted, such as second line systemic therapies, radiation therapy, and surgery. Herein a case of LABC in PD during NAC is reported with a literature review, with the aim of highlighting the importance of a tailored multidisciplinary treatment in each patient.

Water pollution, intensified by the release of hard-to-degrade pollutants, poses severe threats to ecosystems, human health, and economic development. The existing advanced oxidation processes often involve high operational costs and may result in secondary pollution, highlighting the necessity for innovative and more sustainable solutions. To address these challenges, our study introduces a cost-effective and eco-friendly corona discharge barrier plasma discharger for wastewater treatment. Through the central composite design/response surface methodology, a high decolorization rate of 98% of methylene blue (MB) within 10 minutes was achieved by optimizing parameters such as pH and voltage. Furthermore, the mechanisms of the generation of reactive oxygen species via this device was discussed in detail and the degradation pathways of MB were described. Moreover, this device is also very energy-efficient, with a low energy density and electrical energy per order of 0.15 watt/mL and 5.79 kWh/m³/order, respectively. In conclusion, the plasma discharger developed in this study provides a cost-effective and environmentally sustainable solution for dye wastewater treatment. This research contributes significantly to the advancement of sustainable dye wastewater management practices, offering an innovative method that meets both environmental and economic objectives.

The inherited ‘EIA’ process at Brexit is based on a ‘Project’ period from Inception tothe start of construction works. The ‘Incompleteness’ of the process covers andidentifies stages that will impact on the environmental cycle: construction period,operational life, de-commissioning and a return to acceptable environmental footprint.A master environment structure-plan framework is required to commence with theupgrading of the complete ‘EIA’ process, embracing separate limbs for the UK’spriority environmental targets for climate change, and other major adverse effectswhich result in serious ‘harm’ to the UK environment. The identification of the processfor ‘incompleteness’ requires effective sustainability, and inclusion of effectivemanagement tools, for the essential ‘monitoring/control/recording’ proceduresthroughout the project life and the natural environmental cycle. This will allow theopportunity for a new approach to a structured ‘Suite of EIAR Directives’, to enable a‘EIAR’ regime that ‘will remain fit and proper for UK purpose’.

Objectives: Evaluate hand-held echocardiography (HHE) performed and interpreted by trained Advanced Practice Providers (APPs) on hospitalized CHF patients for image quality and interpretation, by comparing against expert echocardiographer and SE findings. Background: Congestive heart failure (CHF) is associated with increased hospital admissions and mortality. While standard echocardiogram (SE) is the gold standard for cardiac assessment, it is not readily available. Hospitalized CHF patients require rapid assessment for expedited treatment. Methods: Over 6 months, five trained APPs performed HHE on hospitalized CHF patients and interpreted: a) Left ventricular (LV) size, b) LV ejection fraction (LVEF), and c) right atrial pressure (RAP). The study echocardiographer reviewed and blindly interpreted HHE images and compared with APPs and SE findings. Kappa-statistics determined the degree of agreement between APPs and study echocardiographer interpretation of HHE images and SE. Results: 80 CHF patients [age 73±14 years, 58% males; LVEF (by SE) 45±19%; 36.3% body mass indexes ≥30 kg/m2] were enrolled. HHE interpretation by APPs had good agreement for LVEF (kappa 0.79) with study echocardiographer and SE (kappa 0.74), and good agreement for RAP (kappa 0.67) with study echocardiographer. Correlation between absolute LVEF interpretation by study echocardiographer on HHE and SE was r=0.88 (p<0.0001). Conclusions: Trained APPs obtained diagnostic-quality HHE images and interpreted LV function and RAP in CHF patients, with good agreement with the study echocardiographer. LVEF by HHE correlated with LVEF by SE. Our study suggests trained APPs can use HHE to evaluate LVEF and RAP in CHF patients leading to expedited and optimized treatment.

This study delves into the atmospheric corrosion behavior of chromium-free complex-phase steel (CP), specifically investigating the influence of wet/dry frequency and ratio in cyclic corrosion tests (CCT). The study employs a modified ISO 14993 standard CCT method, which involves salt spray, dry, and wet stages. After 15 and 30 CCT cycles, mass loss, maximum corrosion depth, and corrosion products were analyzed to gain insights into corrosion mechanisms. In general, increasing the frequency and wet/dry stage ratio in CCT extends the time for autocatalytic reactions to occur, leading to accelerated localized CP corrosion and increased pitting factors. However, as the rust layer thickens, uniform corrosion may also intensify, so careful considerations are necessary. This study underscores the importance of controlling the frequency and ratio of wet/dry stages in CCT for effectively analyzing localized corrosion behavior in specimens.

Advanced cutaneous melanoma is considered the most aggressive type of skin cancer with variable rates of treatment response. Nowadays, there are available some classes of immunotherapy and target therapy for its treatment. Immunotherapy can inhibit tumor growth and its recurrence by triggering host's immune system, while targeted therapy acts inhibiting specific molecules or signaling pathways. However, melanoma response to these treatments are highly heterogenous, and frequently become resistant. Epigenome (DNA/histone modification) contribute to cancer initiation and progression. Epigenetic alterations are divided into four levels of gene expression regulation: DNA methylation, histone modification, chromatin remodeling and non-coding RNAs regulation. The deregulation of lysine methyltransferase enzymes is associated with tumor initiation, invasion, development of metastases, changes in immune microenvironment and drug resistance. The study of lysine histone methyltransferase (KMT) inhibitors is important to cancer epigenetic mechanisms understanding and to biological processes. In addition to immunotherapy and target therapy, the research and development of KMT inhibitors is ongoing. Many studies are exploring the therapeutic implications and possible side effects of these compounds, besides their adjuvant potential to the approved current therapies. Importantly, as with any drug development, safety, efficacy, and specificity are crucial considerations when developing KMT inhibitors for clinical applications.

Methylglyoxal (MGO) is the major compound belonging to reactive carbonyl species (RCS) responsible for the generation of advanced glycation end products (AGEs). Its upregulation followed by deleterious effects at the cellular and systemic level is associated with metabolic disturbances (hyperglycemia/hyperinsulinemia/insulin resistance/hyperlipidemia/inflammatory processes/carbonyl stress/oxidative stress/hypoxia). Therefore, it is implicated in a variety of disorders including metabolic syndrome, diabetes mellitus and cardiovascular diseases. In this review an interplay between pathways leading to MGO generation and scavenging is addressed, in regard to this system’s impairment in pathology. The issues associated with mechanistic MGO involvement in pathological processes, as well as the discussion on its possible causative role in cardiometabolic diseases are enclosed. Finally, the main strategies aimed at MGO and its AGEs downregulation with respect to cardiometabolic disorders treatment are addressed. Potential glycation inhibitors and MGO scavengers are discussed, as well as the mechanisms of their action.

There is a growing notion that biomass are the best resource to replace the declining fossil fuels, yet both share the long lived human threat: toxic combustion emissions. Among the toxic combustion products is carbon monoxide (CO) that not only causes acute but also chronic ailments. This brief review discusses the solid fuel processing technologies from combustion, thermochemical and biochemical processing to kinetics and thermodynamics including the mechanism for release of CO. It further expounds on the burden that CO has caused England and Wales in the last 25 years. The main gist are the systems that have been developed to minimize human exposure to CO including cooking, heating, catalytic and detection systems. Finally, alternative technologies are discussed that work by changing the chemical nature of solid fuels as a way to minimize CO emissions.

This comprehensive analysis thoroughly examines the topic of adversarial attacks in artificial intelligence (AI), providing a detailed overview of the various methods used to compromise machine learning models. It explores different attack techniques, ranging from the simple Fast Gradient Sign Method (FGSM) to the intricate Carlini and Wagner Attack (C&W), emphasising the wide range of adversarial approaches and their intended goals. The discussion also distinguishes between targeted and non-targeted attacks, highlighting the adaptability and versatility of these malicious efforts. Additionally, the study delves into the realm of black-box attacks, revealing the capability of adversarial strategies to compromise models even with limited knowledge. Real-life examples illustrate the tangible consequences and potential dangers of adversarial attacks in various fields such as self-driving cars, multimedia, and voice assistants. These cases highlight the difficulties in ensuring the legitimacy and dependability of AI-powered technologies and programs. The article stresses the importance of ongoing research and innovation to address the growing difficulties posed by advanced methods like deepfakes and disguised voice commands in preserving the security of AI systems. This study provides valuable insights on how different adversarial strategies and defence mechanisms interact within AI. The results emphasise the urgent need for stronger and more secure AI models to combat the increasing number of adversarial threats in today's AI landscape. These findings can guide future research and innovations in developing more resilient AI technologies that can better withstand various adversarial vulnerabilities and challenges.

Cybersecurity plays a relevant role in the new digital age in aerospace industry. Predictive algorithms are necessary to interconnect complex systems within the cyberspace. In this context, where security protocols do not apply, challenges to maintain data privacy and security arise for the organizations. Thus, the need of cybersecurity is required. The four main categories to classify threats are interruption, fabrication, modification and interception. They all share a common thing, soften the three pillars which cybersecurity needs to guarantee. These pillars are confidentiality, availability and integrity of data (CIA). Data injection can contribute to this event by creation of false indicators which can lead to errors creation during the manufacturing engineering process. In this paper, the impact of data injection on existing dataset used on manufacturing process is shown. The design model synchronizes the following mechanisms developed within machine learning techniques which are, the risk matrix indicator to assess the probability of producing an error, the dendrogram to clusters the dataset in groups with similarities, the logistic regression to predict the potential outcomes and the confusion matrix to analyze the performance of the algorithm. The results presented in this study, which was carried out using a real dataset related to the electrical harnesses installed in a C295 military aircraft, estimate that injection of false data indicators increase the probability of errors creation in 24.22 % on the predicted outcomes required for the generation of the manufacturing process. Overall, implementing cybersecurity measures and advanced methodologies to detect and prevent cyberattacks are necessary.

The aim of the study is to evaluate the predictive factors of response to induction chemotherapy in patients with resectable NSCLC, treated at the unit of Thoracic Surgery of Siena University Hospital with radical surgery. From January 1, 2013 to December 31, 2020, 78 patients were recruited. We analyzed the outcomes in terms of 5-years OS based on the Estimated Regression Rate, N2 downstaging and age; two patients’ subgroups were created by age (Group A: age &lt;66 years-old; Group B: age &gt;66 years-old). No 5-year OS difference was observed based on age, while it was observed in patients with N2 downstaging (p=0.031). Bewtween patients with N2 downstaging, only patients in Group A had a significantly increased 5-year OS (p=0.019), while this was not observed in Group B (p=0-321); the same result was observed with the Estimated Regression Rate &gt; 50% (Group A p=0.005; Group B p=0.391). The percentage of disease regression and the N2 down-staging after induction chemotherapy have great value on the survival, although this advantage seems to be observed mostly in younger patients. A multidisciplinary oncologic discussion of clinical cases could provide support in the careful selection of the ideal patients to undergo neoadjuvant treatment before radical surgery.

Advanced composite materials have drawn significant interest in the last years as an alternative to traditional materials due to their higher performance. However, industry struggle to provide low-cost, higher occupational safety, lower footprint with composites, making them suitable for holistic analyses. Therefore, the material design becomes an essential element that can impact the competitiveness, particularly in terms of productivity, circularity, safety, sustainability, and quality of the value chain. The Material Design-for-eXcellence is a state-of-art methodology for material performance multi-dimensional assessment along its life cycle phases, either useful to support ma-terial selection for new products or also to new material design support optimizing resource effi-ciency. In this methodology, the material behaviour and its multiple characteristics assessment, and the manufacturing processes efficiency are evaluated. The framework considers the analogy of product design holistic approaches, as Lean Design-for-X, to organize and assess the mul-ti-dimensional performance for each “X” Material Property. In this work, it was possible to observe that the bio-based composites solutions could be a good sustainable alternative for several sectors. Every day researchers are creating more new materials, having a diversity of properties at different scales, Material Design-for-eXcellence must also in the near future consider other factors. Hence, additional studies are thus foreseen to explore and develop this new tool.

The smart grid system, an improvised form of the traditional grid, is considered a critical cyber-physical system. Due to its complex combination of smart and legacy technologies, this technology is characterized by a wide range of features such as full duplex communication, advanced metering infrastructure, remote monitoring, and control. However, despite this system’s substantial environmental and socio-economic impact on modern life, it poses severe security vulnerabilities due to its integration and interconnected and interdependent cyber-physical components. Based on the rapid development of cyber-physical systems (CPS), academics and industries have investigated relevant techniques to enhance and strengthen the security measures of the SG system. The intrusion detection system is a countermeasure, a powerful safeguard against various cyber-attacks and threats. The contribution of the IDSs to the SG paradigm is examined in this study. A comprehensive review has been presented in this study, highlighting different techniques, basic ideas, and analyses. Besides discussing the contemporary pertinent research studies, the shortcomings of the existing IDS for the SG system are also identified with a recommendation for future research direction.

Metal-organic framework (MOF) is a porous hybrid material of metal ions connected by organic bridging ligands. The coordination bonds link the metal ions, metal-ion clusters, and organic ligands to create the MOFs, and the materials are a distinctive class of crystalline frameworks. These porous materials possess relatively large surface area, tunable pore sizes, various functionalities, and high thermal stability. Therefore, diverse area of research including electrochemical sensor development utilizes distinctive and engineered MOFs materials. The review critically analyzes the strategy adopted for synthesizing a variety of MOFs materials. The role of these engineered materials in the fabrication of a miniaturized device demonstrates the detection of various emerging water contaminants in an aqueous medium. The studies demonstrated an understanding of the insights of sensor and device development. Moreover, the challenges encountered utilizing the MOFs in the electrochemical sensor development are precisely included, along with future perspectives of these studies.

Patients with advanced chronic liver disease (ACLD) or cirrhosis undergoing surgery have an increased risk of morbidity and mortality in contrast to the general population. Retrospective, observational study of ACLD patients to evaluate the predictive capacity of previous surgical risk scores in a European cohort of patients. ACLD was defined by the presence of thrombocytopenia <150.000/uL and splenomegaly; AST-to-Platelet Ratio Index >2; nodular liver edge by ultrasound; transient elastography >15 kPa and/or signs of portal hypertension. We assessed variables related to 90-day mortality and the discrimination and calibration of current surgical scores (Child-Pugh, MELD-Na, MRS, NSQIP, and VOCAL-Penn). Only patients with ACLD and major surgeries included in VOCAL-Penn were considered (n=512). The mortality rate at 90 days after surgery was 9.8%. Baseline disparities between H. Mar and VOCAL-Penn cohorts were identified. Etiology, obesity, or platelet count not were associated with mortality. The VOCAL-Penn showed the best discrimination (C-statistic90D= 0.876) and overall predictive capacity (Brier90D= 0.054) but calibration was not excellent in our cohort. VOCAL-Penn was suboptimal in patients with diabetes (C-statistic30D= 0.770), without signs of portal hypertension (C-statistic30D= 0.555), or with an abdominal wall (C-statistic30D= 0.608) or urgent (C-statistic180D= 0.692) surgeries. Our European cohort has shown a mortality rate after surgery similar to those described in American studies. However, some variables included in the VOCAL-Penn score were not associated with mortality, and VOCAL-Penn’s discriminative ability decreases in patients with diabetes, without signs of portal hypertension, and with abdominal wall or urgent surgeries. These results should be validated in larger multicenter and prospective studies.

The treatment of petroleum refinery wastewater (PRWW) is of great interest in the field of industrial wastewater management. The wastewater contains a diverse concentration of contaminants such as oil and grease, petroleum hydrocarbons, phenol, ammonia, sulfides, as well as other organic and inorganic composites etc. The treatment of refinery wastewater has been treated through various processes including; physical, biological, chemical or hybrid methods which combine two or more techniques. Hence, the objective of this review is to summarize the recent research studies applied in the treatment of petroleum refinery wastewater using conventional, advanced as well as integrated treatment techniques. Furthermore, critically highlight the efficiencies and major limitations of each technique as well as prospects for improvement. Several conventional treatment techniques (basically, the physicochemical and biological processes) were discussed. In this context, advanced oxidation processes (AoPs) especially electrochemical oxidation and photocatalysis as well as the integrated/hybrid processes are found effective to remove the recalcitrant fraction of organic pollutants because of their various inherent mechanisms. These techniques could effectively remove COD and phenols concentration with an average removal efficiency exceeding 90%. Hence, the review also presented an elaborate discussion of the photocatalytic process as one of the advanced techniques and highlighted some basic concepts to optimize the degradation efficiency of a photocatalyst. Finally, a brief recommendation for research prospects is also presented.

Advanced heart failure (AHF) presents a complex landscape with challenges spanning diagnosis, management, and patient outcomes. In response, the integration of multimodality imaging techniques has emerged as a pivotal approach. This comprehensive review delves into the profound significance of these imaging strategies within AHF scenarios. Multimodality imaging, encompassing echocardiography, cardiac magnetic resonance imaging (CMR), and cardiac computed tomography (CCT), stands as a cornerstone in the care of patients with both short- and long-term mechanical support devices. These techniques facilitate precise device selection, placement, and vigilant monitoring, ensuring patient safety and optimal device functionality. In the context of orthotopic cardiac transplant (OTC), the role of multimodality imaging remains indispensable. Echocardiography offers invaluable insights into allograft function and potential complications. Advanced methods, like speckle tracking echocardiography (STE), empower the detection of acute cell rejection. CMR and CCT further enhance diagnostic precision, especially concerning allograft rejection and cardiac allograft vasculopathy. This comprehensive imaging approach goes beyond diagnosis, shaping treatment strategies and risk assessment. By harmonizing diverse imaging modalities, clinicians gain a panoramic understanding of each patient's unique condition, facilitating well-informed decisions. Thus, this review underscores the irreplaceable role of multimodality imaging in elevating patient outcomes, refining treatment precision, and propelling advancements in the evolving landscape of advanced heart failure management.

Simultaneously with the development of industrial society, wastewater with organic pollutants has caused various environmental problems. The most majority of organic pollutants in water and wastewater are persistent, reason which can cause serious problems for human health, animal health, and for the whole environment. Therefore, efficient treatment methods for wastewater with highly concentration of organic compounds are immediately necessary. During the last years, the prescribed and non-prescribed consumption of antibiotics has grown a lot worldwide. Big quantities of antibiotics are discharged into wastewater because their incomplete absorption by living organisms, but at small concentrations present in aquatic environments represents a major risk for the human health and environment protection. The paper presents the main advantages and disadvantages of advanced oxidation processes, but also current state and new perspectives in the field of environment protection. Advanced oxidation processes (AOPs) are often used in the field of treatment of different types of wastewater. AOPs are based on physicochemical processes that create significant structural changes in chemical species, their commercialization at a wide scale may result in cost reductions that are desirable for environmental applications. The majority of antibiotics may be eliminated using physicochemical processes, such as photo-Fenton, photolysis, ozonation, electrooxidation, heterogeneous catalysis, and other bio processes. In comparison to conventional chemical processes, AOPs provide superior oxidation efficiency, ideal operating costs, and zero secondary pollutants.

The increasing social pressure for decarbonization has placed businesses under considerable scrutiny to actively reduce carbon emissions. A critical step towards achieving this objective is to shift conventional production and consumption systems to more sustainable alternatives. Thus, there is the emergent need to understand the patterns and drivers of the transformative business models (BMs) that underpin that shift. This study adopts a mixed-methods approach that integrates different literature streams--including Sustainability Transitions Theory (STT), Strategic Niche Management (SNM), and the Business Models approach--and stakeholders’ interviews to investigate the key elements of business models that lead towards sustainable practices. This research examines the organizational arrangements of European start-ups operating between 2014 and 2020. The transformation towards decarbonized production and consumption is characterized by efficient combination of business strategies that incorporate advanced technologies (ATs), such as artificial intelligence (AI), machine learning (ML) and its algorithms, along with sustainable elements, resulting in transformative business models. By exploring the driving elements behind the transition to low-carbon approaches, this study fills a significant gap in the existing literature on business models. The findings from this research also hold relevance for policymakers to promote decarbonization.

3D/4D printing technologies are currently among the fastest growing, cutting edge fabrication technologies. The scale of their applications is vast and applicable to nearly all industries. 3D printing technologies are particularly popular in robotics, and especially in advanced design innovative solutions for areas such as manufacturing, space technology and medicine. The development of robotics, and in particular of the precision of manufactured components, such as actuators, pneumatic muscles, power transmission units, etc., means that new prototypes are still being made, where the use of 3D printers reduces the production time severalfold and allows for completing the necessary simulations and tests. In addition, the use of 3D printers allows for the production of thin-walled and cellular structures, which is a great advantage compared to conventional fabrication technologies. In the range of 3D printers available on the market, only a few selected technologies allow for actual use in the construction of advanced robot elements (muscles, vibration dampers, etc.). In the era of rapid growth of the precision of the available 3D printers and modern materials, 3D printing may soon become a major tool in robotics. This article presents an overview of 3D printing technologies and materials in terms of their application in robotics and provides examples of the use of 3D and 4D printing in prototyping and fabrication of robotic elements with particular emphasis on the current state of the art. The study considered the possibilities of using 3D/4D printing in robotics with the use of polymeric materials. The review of the literature and the research work currently being carried out in this area is very promising and it seems that 3D/4D printing in robotics is widely used and is still developing, which allows to conclude that in the near future the number of research works in this field will increase rapidly.

Life in the modern century is heavily reliant on an enormous amount of electricity consumption as technology has become the most integral part of daily life. In this context, smart grid systems play a pivotal role to maintain the uninterrupted power supply which needs to be monitored in a timely fashion to keep track of the electric consumers’ usage pattern. The smart meter is the one of smart applications of the smart grid that collects huge amounts of consumer load data on a daily basis which has become a focus for various researchers and analyzers to study load characterization. In this paper, an approach has been proposed to recognize the energy consumption patterns among diverse types of consumers ranging from residential to industrial levels. This approach is worth considering not only for load pattern recognition but also for involving customers in different events such as demand response or peak shaving. In such a way, this analytical mechanism certainly assists in reducing power wastage and saving costs. The proposed methodology is based on a two-fold clustering algorithm with the use of state-of-the-art technology, machine learning. The primary goal is to classify electric customers' data collected from smart meters. Then, analyzing the classified results with an aim to predict power consumption patterns for the customers in the future and making the right energy policy that will benefit both the grid operator and consumers as well.

Globally, gastric cancer is a major cause of cancer mortality, with a 5-year survival rate of 32% for locally advanced and metastatic gastric cancer. This systematic literature review summarized the clinical, safety, and humanistic outcomes associated with systemic regimens given as first line therapy for locally advanced and metastatic gastric cancer. The search included articles published in English in PubMed, Embase, Web of Science, Cochrane Central Register of Controlled Trials, and the American Society of Clinical Oncology meeting library, from inception to April 2022. Phase II and III randomized controlled trials conducted among western populations diagnosed with stage III and IV locally advanced and metastatic gastric cancer were included. Two investigators independently reviewed the studies, conducted data extraction, and assessed risk of bias in accordance with PRISMA guidelines. Twenty-four randomized controlled trials totaling 8,705 patients were included. Median overall survival ranged from 5.0-13.1 months, median progression-free survival ranged from 2.0-7.7 months, and objective response ranged from 13.0-64.1%. Two studies reported higher quality of life outcomes. Grade 3 and 4 adverse events were reported in most studies. Improvement in clinical outcomes can be seen in recently published randomized controlled trials for locally advanced and metastatic gastric cancer.

Background and Objectives: The purpose of this study was to assess the bleeding that occurs during the first weeks of gestation and its implications throughout pregnancy. Secondarily, we studied the associated complications that appeared and tried to identify possible risk factors that could serve to select women at a greater risk of adverse outcomes that could benefit from an early diagnosis and improved monitoring. Materials and Methods: We selected all the women who consulted for first trimester metrorrhagia in the Emergency Department of the Hospital QuirónSalud in Malaga over the year 2015. We refer to first trimester metrorrhagia as that which occurs until week 12+6. Once the pregnant women were identified, we studied certain risk factors already present prior to the gestation and others associated with the gestation and its evolution. Results: After reviewing the visits to the obstetrics and gynecology emergency department, we selected those patients that met the inclusion criteria, resulting in a sample of 696 patients that we followed up. The average age of our patients was 34.1 years, with an average number of visits to the hospital of 1.67, most of them between the 5th and 8th weeks of pregnancy. 45.3% of these pregnancies resulted in a first trimester miscarriage, mainly between weeks 6 and 8. We tried to establish associations in order to identify possible risk factors, finding a relationship between increased maternal age and a higher risk of first trimester pregnancy loss, which rises as maternal age increases (33,37 4,316 years vs 35,01 4,740 years). This increase in risk is proportional to the increase in age. We made subgroups of women over 35 and over 40 and confirmed that increased age led to worse outcomes. We also studied several gestational complications and concluded that they appeared more frequently among older women. These complications include prematurity (33.11 vs 34.48 years), gestational diabetes (33.11 vs 36.06 years) and preeclampsia (33.25 vs 35 years). We reviewed the obstetric history of pregnant women whose gestation resulted in miscarriage and found that 50.5% of them had previously had another loss. Conclusions: Comparing the results with data from the general population, we found that the rate of first trimester miscarriage is up to 3 times higher among women who present bleeding during the first weeks of gestation compared to those who do not develop this complication. Maternal age is a risk factor for first trimester pregnancy loss and for the development of complications associated with pregnancy.

Locally advanced rectal cancer (LARC) has traditionally been treated with trimodality therapy consisting of neoadjuvant radiation +/- chemotherapy, surgery and adjuvant chemotherapy. There is currently a clinical need for biomarkers to predict treatment response and outcomes, especially during neoadjuvant therapy. Liquid biopsy in the form of circulating tumour cells (CTCs) and circulating nucleic acids in particular microRNAs (miRNA) are novel, highly stable and clinically relevant regulators of disease. We studied a prospective cohort of 52 patients with LARC, and obtained samples at baseline, during treatment, and post-treatment. We enumerated CTCs during chemoradiation at these three time-points, using the IsofluxTM CTC Isolation and detection platform. We then subjected the isolated CTCs to miRNA expression analyses, using a panel of 106 miRNA candidates. We identified CTCs in 73% of patients at baseline, and numbers fell during treatment and miRNA expression profiles also changed during treatment. Between baseline and during treatment (week 3) time-points three microRNAs (hsa-miR-95, hsa-miR-10a and hsa-miR-16-1*) were highly differentially expressed. Importantly, hsa-miR-19b-3p and hsa-miR-483-5p were found to correlate with good response to treatment. The latter (hsa-miR-483-5p) was also found to be differentially expressed between good responders and poor responders. They represent potential predictive biomarkers and a potential miRNA-based treatment strategy. In this study, we demonstrate that CTCs are present and can be isolated in the non-metastatic early stage cancer setting, and their associated miRNA profiles can potentially be utilized to predict treatment response.

Introduction: pembrolizumab showed to increase survival in patients with metastatic melanoma, Con-sidering the numerous oncoming studies, we decided to conduct a narrative review of the latest efficacy evidence regarding the use of pembrolizumab, alone or in combination, in patients with metastatic melanoma. (2) Methods: A search was conducted on Pubmed using "pembrolizumab," and "metastatic melanoma" as keywords, considering studies from 2022 onward. (3) results: we reviewed pembroli-zumab and associations, cost-effectiveness, virus, advanced acral melanoma, long-term outcomes, re-al-life data, biomarkers, obesity, and vaccines (4) Conclusions: pembrolizumab is a fundamental op-tion in the therapy of metastatic melanoma. However, a certain group of patients do not respond and therefore new combination options need to be evaluated. In particular, the use of vaccines tailored to tumor epitopes could represent a breakthrough in the treatment of resistant forms. Further studies with larger sample numbers are needed to confirm preliminary results.

The use of unmanned aerial aircrafts (UAVs) is governed by strict regulatory frameworks that prioritize safety. To guarantee safety, it is necessary to acquire and maintain situational awareness (SA) throughout the operation. Existing Canadian regulations require pilots to operate their aircrafts in visual line-of-sight. Therefore, the task of acquiring and maintaining SA primary falls to the pilots. However, the development of aerial transport is entering a new era with the adoption of a highly dynamic and complex system known as advanced air mobility (AAM), which involves UAV operating autonomously beyond visual line-of-sight. SA must therefore be acquired and maintained primarily by each UAV through specific technologies and procedures. In this paper, we review these technologies and procedures in order to decompose the SA of the UAV in the AAM. We then use the system modeling language to provide a high-level structural and behavioral representation of the AAM as a system having UAV as its main entity. In a case study, we analyze one of the flagships UAVs of our industrial partner. Results show that this UAV doesn’t have all the technologies and methodologies necessary to achieve all the identified SA goals identified for the safety of the AAM. This work is a theoretical framework intended to contribute to the realization of the AAM, and we also expect to impact the future design and utilization of UAVs.

The need for cohesive detection and defence methods against cyberattacks is significant now more than ever before to enforce security and privacy of user data and information. The inevitable increase in demand for home and flexible working from employees quite recently has meant there is a lack of awareness and training for cyberattacks. Hence, they have become prominent as attackers are aware of this and are benefitting from individuals’ lack of knowledge in how to better protect themselves and their confidential information. Employees are becoming more susceptible to such attacks and falling victim to these, resulting in economic losses for companies, data losses and decreased faith.

Most petrochemical plants still maintain a Proportional-Integral-Differential controller(PID) system, which is a feedback control system. However, gradually, the PID system is being extended and introduced to the Advanced Process Controller (APC) system, which is an integrated control system of feedforward and feedback that predicts external influences in advance. In the process of conducting on-site plant tests and calculating APC model parameter for the application of APC systems, a problem arises that Model Parameter are implemented differently depending on the proficiency of APC engineers. To minimize this problem, a technique for estimating APC model parameter without a plant test is required. In order to estimate the APC model parameter, it is necessary to train on dynamic interval data. In this paper, we use statistical techniques such as PELT, Linear Kernel, and Radial Basis Function Kernel of Change Point Detection (CPD) to extract dynamic data with minimum Mean Absolute Error (MAE) from time series data of a real petrochemical plant. Then, the hyper parameter is fixed and the APC model parameter is estimated by learning the dynamic section data. By applying the estimated APC model parameter to the APC Model Tool and measuring the fitting rate, it was confirmed that it is possible to estimate the APC model parameter with excellent control performance without plant test.

This paper presents a systematic literature review that identifies critical factors impacting the implementation of advanced manufacturing technology (AMT) worldwide. The study utilizes two databases, ProQuest and Compendex, as well as Google Scholar. The study identified eight dimensions that illustrate the critical factors of AMT adoption and implementation: education, planning, top management know-how, technical know-how, business, economic impact, regulations, and social impact. The results highlight a research gap in understanding the need for effective integration among these eight dimensions in developed and developing economies. Consequently, the study recommends the adoption of a broader perspective that considers the role of integration and interaction between critical factors in each category and their impact on AMT implementation. The systematic literature review conducted in this study reviews several critical factors related to the adoption and implementation of AMT.

In this paper, mesoporous electrodes consisted of Sb-doped SnO2 deposited onto Ti plates controlled corroded under acidic medium were synthesized by spin-coating method, and morpho structurally characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The electrodes were electrochemical testing in the degradation/mineralization by electrooxidation (EO) of doxorubicin (DOX) as single-component and multi-component together with capecitabine (CCB)-from cytostatic class and humic acid (HA)-from natural organic matter (NOM) class in the absence/the presence of activated carbon (AC) as particulate electrode. The best mineralization efficiency of 67 % was achieved for DOX mineralization using Sb-doped SnO2 deposited onto Ti plate controlled corroded with oxalic acid in electrooxidation process. The presence of AC within the electrolysis process generated a synergy effect of 52.75 % for TOC parameter removal, which is in accordance and quite better than the result reported in the literature. The aspects related to the complex mechanism of DOX degradation and mineralization are discussed. The superiority of AC assisted electrooxidation, as electrochemical filtering (EF), was proved considering simultaneous degradation and mineralization of mixture of doxorubicin, capecitabine and humic acid.

Toxic advanced glycation end-products (TAGE), formed by glyceraldehyde (GA) as an intermediate in the non-enzymatic reaction with intracellular proteins, are highly cytotoxic and have been implicated in the pathogenesis of various diseases. However, the mechanisms underlying the degradation and removal of TAGE remain largely unknown. In the present study, we identified the checkpoint kinase-1 (CHK1) mutant, d270KD, which was rapidly degraded intracellularly by GA, and showed that its degradation was mainly mediated by the ubiquitin-proteasome pathway. The high-molecular-weight complexes formed by the GA stimulation of d270KD were abundant in the RIPA-insoluble fraction, which also contained high levels of TAGE. The knockdown of p62/SQSTM1 reduced the amount of high-molecular-weight complexes in the RIPA-insoluble fraction, indicating its involvement in the formation of TAGE aggregates. The present results suggest that the ubiquitin-proteasome pathway and p62 play a role in the degradation and aggregation of intracellular TAGE formed by GA. This study provides new insights into the mechanisms underlying TAGE metabolism and may lead to the development of novel therapeutic strategies for diseases associated with TAGE accumulation.

Iron-based materials are widely applied in Fenton chemistry and they have promising prospects in the processing of wastewater. The composition complexity and rich chemistry of iron and/or oxides, however, hamper the precise understanding on the active sites and the working mechanism which still remain highly controversial. Herein, iron oxides of four different model systems are designed through a conventional precipitation method plus H2 reduction treatment. These systems feature Fe@Fe3O4 with abundant oxygen vacancy, Fe0 and Fe3O4 particles with interface structures, and Fe3O4-dominated nanoparticles of different sizes. These materials are applied in the decomposition of methyl orange as a model reaction to assess the Fenton chemistry. The Fe@Fe3O4 with core-shell structures exhibited significantly higher decomposition activity than the other Fe3O4-rich nanoparticles. A thin Fe3O4 layer formed by auto-oxidation of iron particles when exposing to air can boost the activity as compared with the Fe0 and Fe3O4 particles with interface structures but poor oxygen vacancy. The unique hetero-structure with the co-existence of both metallic iron and oxygen vacancy displayed excellent redox propensity which might account for the superior Fenton activity. This finding provides a new perspective to understand and design highly efficient iron-based Fenton catalysts.

On April 17, 2019, a coach with tourists from Germany crashed in Madeira requiring repatriation by the German Air Force. The Advance Trauma Life Support (ATLS) concept was the central component of patient care. Data in Madeira were collected through a structured interview. The analysis of the Aeromedical Evacuation was based on intensive care transport records. In Germany all available were reviewed for data collection. Quality of life (HRQoL) was evaluated by the 12-item Short-Form Health Survey (SF-12). Twenty-eight prehospital patients were transported to the Level III Trauma Center in Funchal (Madeira). Five operative procedures were performed. Fifteen patients were eligible for Aeromedical Evacuation (AE). In the second hospital phase in Germany in total 82 radiological images and nine operations were performed. Hospital stay lasted 11 days (median, IQR 10–18). Median Follow-up (14 of 15 patients) was 16 months (IQR 16–21). 80% (8 out of 10) showed an increased risk for post-traumatic stress disorder (PTSD). Six key findings were identified in this study: divergent injury classification, impact of AE mission on health status, lack of communication, need of PTSD prophylaxis, patient identification, media coverage. Those findings may improve AE missions in the future e.g. required after armed conflicts.

Sarcoidosis is a multisystemic disease of unknown etiology characterized by the formation of granulomas in various organs, especially lung and mediastinal hilar lymph nodes. The clinical course and manifestations are unpredictable: spontaneous remission can occur in approximately two thirds of patients; up to 20% of patients have chronic course of the lung disease (called Ad-vanced Pulmonary Sarcoidosis) resulting in progressive loss of lung function, sometimes life-threatening that can lead to respiratory failure and death. The immunopathology mechanism leading from granuloma formation to the fibrosis in APS still remains elusive. Recent studies have provided new insights into the genetics factors and immune components involved in the clinical manifestation of the disease. In this review we aim to summarize the clinical-prognostic charac-teristics and molecular pathways which are believed to be associated with the development of APS

Many advanced reactor concept designs rely on high-assay low-enriched uranium (HALEU) fuel, enriched up to approximately 19.75% 235U by weight. Efforts are underway by the US government to increase HALEU production in the United States to meet anticipated needs. However, very little data exists for validation of computational models that include HALEU, beyond a few fresh fuel benchmark specifications in the International Reactor Physics Experiment Evaluation Project. Nevertheless, there is other data with potential value available for developing into quality benchmarks for use in data and software validation efforts. This paper reviews the available evaluated HALEU fuel benchmarks and some of the potentially relevant benchmarks for fresh highly enriched uranium. It then introduces experimental data for HALEU fuel irradiated at Idaho National Laboratory, from relatively recent irradiation programs at the Advanced Test Reactor. Such data should be evaluated and, if valuable, collected into detailed benchmark specifications to meet the needs of HALEU-based reactor designers.

Elucidating physicochemical processes in the degradation of pollutants may optimize their removal from water sources. This work presents a set of elementary steps in the photocatalytic degradation of carbamazepine (CBZ), assuming a steady state approximation in an Advanced Oxidation Process (AOP) combining short-wave ultraviolet radiation (UVC), homogeneous reagent (H₂O₂) and heterogeneous (TiO₂) catalyst. Elementary steps include excitation of both reagent/catalysts by UVC photons, adsorption of CBZ on the excited TiO₂, or its oxidation by hydroxyl radicals. Assuming the steady state approximation on the intermediate products (excited TiO₂, CBZ- excited TiO₂ complex, and hydroxyl radicals), leads to rate laws for degradation of CBZ, in which UVC radiation, TiO₂, and H₂O₂ are pseudo first order at all concentrations or intensities having no direct influence on CBZ pseudo-order, whereas CBZ shifts from pseudo first order at low concentrations to pseudo-zero order at high concentrations. Several experiments to test the mechanism were conducted, by varying CBZ, H₂O₂, and TiO₂ concentrations, and UVC radiation intensities. Measured results indeed fit the suggested mechanism for the first three, but irradiation intensity appears to shift CBZ influence from pseudo-second to pseudo-first order with increased intensities. Corrected elementary steps are proposed to fit the results.

Abstract: Advanced high-grade serous ovarian carcinoma is a serious malignant neoplasm with a late diagnosis and high mortality rate. Even when treated with standard therapy, such as surgery followed by carboplatin and paclitaxel chemotherapy, the prognosis remains unfavorable. Im-munotherapy is a treatment alternative that requires further study. Therefore, we aimed to evaluate the expression of the immunotherapy markers: PD-1, PD-L1, CD8, MSI (MLH1, MSH2, MSH6, and PMS2), and p53 in the paraffin samples of high-grade serous ovarian carcinoma. A retrospective study of 28 southern Brazilian patients with advanced serous ovarian carcinoma (EC III or IV) was conducted between 2009 and 2020. The expression of these proteins was evaluated using im-munohistochemistry, and the results were correlated with the patients' clinicopathological data. At diagnosis, the mean age was 61 years, and the most common clinical stage (60%) was EC III. Among the cases, 84.6% exhibited p53 overexpression, 14.8% had MSI, 92.0% were sensitive to platinum, and more than 50.0% relapsed after treatment. Patients with MSI had a lower CD8/PD-1 ratio and more relapses (p=0.03). In conclusion, analysis of immunotherapeutic markers in paraf-fin-embedded samples of advanced serous ovarian carcinoma is feasible and may assist in prog-nosis.

This review focus on a critical analysis of nanocatalysts for Advanced Reductive Processes (ARP) and Oxidation Processes (AOP) designed for the degradation of poly/perfluoroalkyl substances (PFAS) in water. Ozone, ultraviolet and photocatalyzed ARP and/or AOP will be the basic treatment technologies. Besides the review of the nanomaterials with greater potential as catalyst for advanced processes of PFAS in water, the perspectives for its future development considering sustainability considerations will be discussed. Moreover, a brief analysis of the current state of the art of the ARP and AOP for the treatment of PFAS in water will be presented.

We explored the outcomes of germline BRCA1/2 pathogenic/likely pathogenic variants (PVs/LPVs) in the endocrine-sensitive disease treated with first line standard of care cyclin-dependent kinase 4/6 (CDK4/6) inhibitors. Three studies retrospectively showed a reduction in overall survival (OS) and progression free survival (PFS) in gBRCA1/2m patients compared to both germinal BRCA1/2 wild type (gBRCA1/2wt) and to the untested population. Regarding the efficacy of PI3K inhibitors, there are no subgroup or biomarker analyses in which germinal BRCA status was explored. However, the biological interactions between the PIK3CA/AKT/mTOR pathway and BRCA1/2 at a molecular level could help us to understand the activity of these drugs when used to treat BC in BRCA1/2 PVs/LPVs carriers. The efficacy of trastuzumab deruxtecan (T-DXd), an antibody-drug conjugate (ADC) targeting HER2 for HER2-low and HER2-positive (HER2+) BC, has been increasingly described. Unfortunately, data on T-DXd in HER2+ or HER2-low metastatic BC harboring germinal BRCA1/2 PVs/LPVs is lacking. Including germinal BRCA1/2 status in the subgroup analysis of the registration trials of this ADC would be of great interest, especially in the phase III trial DESTINY-breast04. This trial enrolled patients with HER2-negative (HER2-) and both HR+ and HR- metastatic disease, which can now be categorized as HER2-low. The HER2-low subgroup includes tumors that were previously classified as triple negative, so it is highly likely that some women were germline BRCA1/2 PVs/LPVs carriers and this data was not reported. Germline BRCA1/2 status will be available for a higher number of individuals with BC in the near future and data on the prognostic and predictive role of these PVs/LPVs is needed in order to choose the best treatment options.

The spiral tube heat exchange is widely used in large-scale liquefaction process. However, the research on the friction pressure drop of the two-phase flow in the spiral tube is limited, especially for the offshore sloshing condition. In this paper, an experimental system is designed and built, and the effects of sloshing form (roll, pitch, heave), sloshing period (5-15s), mass flux (200-800 kg/(m2·s)), vapor quality (0.3-0.9) and operating pressure (2-4 MPa) on friction pressure drop of methane/ethane (C1/C2) mixture in spiral tube are studied. The result shows that the growth rate of time-averaged friction pressure drop during condensation under sloshing condition is less than 0, which indicates that sloshing will lead to drag reduction. And under the three sloshing parameters, the growth rate of time-averaged friction pressure drop of C1/C2 is reduced by-5.99%%, 5.97% and -6.70% respectively.

Using a simple model for internal heat evolution and mass-internal heat relations found for rocky exo planetary objects in the inner solar system we have inferred the phases of volcanism at earth ( EA) or host star ages (SA) in 52 potentially habitable rocky exo planets. We have also calculated the internal tidal heat contributions and magnetic moments of these exo planets. Based on these results we have inferred the probability of existence of life favouring geophysical conditions in the above exo planets at EA and SA. In M star associated exo planets, occurrences of super flares and long night periods may pose problems for the development of advanced life

Technology-enabled maintenance via sensors and the internet of things (IoT) technologies is seen as the “new maintenance strategy”. The aim is to use these technologies to focus on unnecessary breakdowns and increase levels of asset availability where the existing of a dedicated team to maintain or data on asset condition is limited, useless or full of noise. This paper presents the integration of various sensing nodes within an automated laser cutting machine for monitoring of critical components’ conditions. The integrated system provides a centralised platform for data collection from various sensors and provides early failure detection mechanism based on specified set points with alert mechanisms utilising a custom dashboard for data visualisation. The research highlights the required stages for the identification of the appropriate components and sensory devices for the development of efficient monitoring environment.

High-resolution (2 km) high-frequency (hourly) SST data from 2015-2020 provided by the Advanced Himawari Imager (AHI) onboard the Japanese Himawari-8 geostationary satellite positioned over 140.7°E were used to study spatial and temporal variability of the China Coastal Front (CCF) in the East China Sea. The hourly SST data were processed with the Belkin and O’Reilly (2009) algorithm to generate long-term mean monthly maps of SST gradient magnitude (GM) and frontal frequency (FM) using a GM threshold of 0.1°C/km. Horizontal structure of SST field in the vicinity of the CCF was investigated from cross-frontal distributions of SST along 8 parallels from 31°N to 24°N. The high resolution (2 km) monthly distributions of SST along these 8 parallels were used to determine inshore and offshore boundaries of the CCF and calculate the CCF strength defined as the total cross-frontal SST step dSST=Offshore SST – Inshore SST. The CCF emerges in November, fully develops in December and peaks in strength in January-February. The front’s fragmentation and shrinking/weakening begins in February and March, respectively. In winter (December-February), the front’s strength dSST exceeds 5°C offshore the Zhejiang-Fujian coast and could be as high as 7.5°C when nearshore waters cool down to 7°C. In winter, the front’s strength decreases downstream from 31°N to 24°N. The CCF changes its physical nature as the seasons progress. In winter, the CCF is a water mass front between cold and fresh water coming from the north and warm and salty water coming from the south. In summer, the CCF becomes a coastal upwelling front maintained largely by southerly winds. In winter, the CCF’s cross-frontal structure in the SST field is ramp-shaped, with SST increasing monotonously in the offshore direction. In summer, the CCF’s cross-frontal structure in the SST field is V-shaped or U-shaped, featuring a minimum SST formed by cold upwelled water at some distance from the shore. Thus, the summer SST structure effectively consists of two fronts, a nearshore and offshore, with a minimum SST in-between. Across the inshore/offshore front, the SST decreases/increases in the offshore direction. The local bathymetry, especially the relatively steep shelf slope between 20-m and 50-m isobath, steers the front, which does not meander in winter offshore the Zhejiang-Fujian coast. As the cold season progresses, the front’s axis gradually shifts into deeper waters, from ~20 m to ~50 m.

Advanced Hepatocellular carcinoma (HCC) is no longer a terminal illness. This change was mainly attributed to the development of new treatments including tyrosine-kinase inhibitors (TKIs), vascular endothelial growth factor (VEGF) inhibitors and immune checkpoint inhibitors (ICPIs) but the financial toxicity of treating advanced HCC is of a major concern specially in low middle-income countries (LMICs) where the patients are still battling for their most basic rights. Most of advanced HCC patients in LMICs have very limited accessibility to the new treatments including ICPIs. Searching for out of the box solutions to improve access to treatments -mainly ICPIs- is an utmost necessity for LMICs advanced HCC patients.