In this paper, a new full-Newton step feasible interior point method for convex quadratic programming is presented and analyzed. The idea behind this method is to replace the complementarity condition with a non-negative variable weight vector and use the algebraic equivalent transformation for the obtained equation. Under the selection of appropriate parameters, the quadratic rate of convergence of the new algorithm is established. In addition, the iteration complexity of the algorithm is obtained. Finally, some numerical results are presented to demonstrate the practical performance of the proposed algorithm.

This paper introduces an Agent-Based Model (ABM) for investigating the dynamics of the Internet of Things (IoT) ecosystem, specifically focusing on dynamic coalition formation among IoT Service Providers (SPs). Extending our prior work in 5G network modeling, the ABM captures intricate interactions among device, network operator, SP, and customer agents, offering a versatile framework for studying IoT ecosystem dynamics. The simulation portrays the adaptive nature of collaborations, providing insights into the role of dynamic coalition formation in shaping the collaborative landscape of IoT.

Predictions of mean values of statistical variables of large scale turbulent flow by the widely used basic k-ϵ model and a new fundamentally based model are verified against published results of Direct Numerical Simulations DNS of the Navier-Stokes equations. The verification concerns turbulent channel flow at shear Reynolds numbers of 950, 2000 and 104. The basic k-ϵ model is largely based on empirical formulations accompanied by calibration constants. This contrasts with the new model where descriptions of leading statistical quantities are based on the general principles of statistical turbulence at large Reynolds number. Predicted values of major output variables such as turbulent viscosity, diffusivity of passive admixture, temperature, and fluid velocities compare well with DNS in case of the new model. Significant differences are seen in case of the basic k-ϵ model.

Apoptotic cells possess immunomodulatory effects that can be utilized to treat imbalanced immune conditions. Information on the preclinical safety of such treatment is sparse. In this study, the safety of apoptotic cells (Allocetra-OTS) was assessed in a GLP toxicological study on Sprague Dawley rats. Three doses of Allocetra-OTS or vehicle were administered intravenously (IV) for 3 consecutive days. Animals in the Main study were sacrificed on day 4, while animals from the Recovery groups were kept for 14 or 28 days. Allocetra-OTS was well tolerated, and no adverse effects were observed in body weight, clinical signs, food consumption or ophthalmologic observation. Thus, the No Observed Adverse Effect Level (NOAEL) dose was determined as the highest dose administered. An observed elevation in immune cells was suspected to be due to Allocetra-OTS; similarly to other clinical chemistry parameters, however, it was resolved in the Recovery phases. Splenomegaly and a dose-related Extramedullary Hematopoiesis (EMH) in the red pulp were observed, with no adverse events, and were considered to be a normal and expected reaction following IV administration of cell-based therapies. In conclusion, under the conditions of this study Allocetra-OTS was concluded to be safe, further supporting its potential candidacy for clinical studies

Background: Ankle fractures, comprising about 10% of musculoskeletal injuries, pose a significant healthcare burden with an increasing incidence, particularly among an aging population. This study focuses on isolated Danis-Weber type B fractures. Recent trends lean towards surgical intervention for anatomical restoration, quicker recovery, albeit with associated complications. This report aims to assess the safety and efficacy of NewClip narrow locking plate system with early weight bearing in treating isolated fibular fractures. Methods: The study includes patients with Danis-Weber type B fractures surgically treated with NewClip narrow locking plate system. Exclusions involved nondisplaced fractures, open fractures, or those requiring additional fixation.Results: Fifteen patients were enrolled in this study. Minor complications, including wound swelling, were observed in two cases. The Visual Analogue Scale (VAS) for pain exhibited a steady decline postoperatively, with almost complete resolution by the third month. At three months, the FAOS demonstrated excellent results, and final follow-up at twelve months revealed complete osseous healing without complications.Conclusions: The use of this type of plates in treating isolated fibular fractures with early weight bearing shows promising results in terms of fracture healing, pain resolution, and functional outcomes warranting further investigation with larger cohorts.

In patients with schizophrenia, metabolic syndrome is associated with cognitive impairments. We carried out a second analysis of data from a longitudinal trial to examine the relationship between weight gain and cognitive function in patients with first-episode schizophrenia (FES) over the first 6-month antipsychotic treatment. Baseline and 6-month endpoint measurements were taken for both cognitive function and body weight. Linear and logistic regression analyses were applied to investigate the bidirectional relationship between weight gain and cognitive function. Clinically relevant weight gain (CRW) was defined as an increase in body weight ex-ceeding 7%. The final analysis included 337 participants. Lower baseline scores in processing speed (OR=0.837, p=0.007), working memory and attention (OR=0.889, p=0.043), and executive function (OR=0.863, p=0.006) domains were significantly associated with CRW at the 6-month endpoint. After adjusting for confounders, CRW was found to be associated with improvement in the Brief Visuospatial Memory Test (p=0.036). The findings suggest that patients with lower baseline cognitive performance experienced more substantial weight gain. Conversely, weight gain was correlated with cognitive improvements, particularly in the domain of visual learning and memory. This suggested a potential bidirectional relationship between weight gain and cog-nitive function in patients with first-episode schizophrenia.

Predicting human trajectories poses a significant challenge due to the complex interplay of pedestrian behavior, which is influenced by environmental layout and interpersonal dynamics. This complexity is further compounded by variations in scene density. To address this, we introduce a novel dataset from the Festival of Lights in Lyon 2022, characterized by a wide range of densities (0.2-2.2 ped/m2). Our analysis demonstrates that density-based classification of data can significantly enhance the accuracy of predictive algorithms. We propose an innovative two-stage processing approach, surpassing current state-of-the-art methods in performance. Additionally, we utilize a collision-based error metric to better account for collisions in trajectory predictions. Our findings indicate that the effectiveness of this error metric is density-dependent, offering prediction insights. This study not only advances our understanding of human trajectory prediction in dense environments but also presents a methodological framework for integrating density considerations into predictive modeling, thereby improving algorithmic performance and collision avoidance.

Use of MS Excel as a platform for teaching simple iterative solution of partial differential equations runs into issues of reliability of the computation because of the large number of calculations required. This article documents the problem and an empirical solution. The cause of this unreliability was found by detailed examination of the numerical results from three simultaneous iterations. Computers of several types from different manufacturers were found to fail occasionally in updating variables in the numerical iteration. A simple work-around is suggested and was tested on several platforms.

System-of-systems (SoS) evolution is a complex and unpredictable process. Although various principles to facilitate collaborative SoS evolution have been proposed, there is a lack of experimental data validating their effectiveness. To address these issues, we present an Agent-Based Model (ABM) for SoS evolution in the Internet of Vehicles (IoV) , serving as a quantitative analysis tool for SoS research. By integrating multiple complex and rational behaviors of individuals, we aim to simulate real-world scenarios as accurately as possible. To simulate the SoS evolution process, our model employs multiple agents with autonomous interactions and incorporates external environmental variables. Furthermore, we propose three evaluation metrics: evolutionary time, degree of variation, and evolutionary cost, to assess the performance of SoS evolution. Our study demonstrates that enhanced information transparency significantly improves the evolutionary performance of distributed SoS. Conversely, the adoption of uniform standards only brings limited performance enhancement to distributed SoSs. Although our proposed model has limitations, it stands out from other approaches that utilize Agent-Based Modeling to analyze SoS theories. Our model focuses on realistic problem contexts and simulates realistic interaction behaviors. This study enhances the comprehension of SoS evolution processes and provides valuable insights for the formulation of effective evolutionary strategies.

Objective: The aim of this in vitro study was to evaluate the accuracy of resin-based fixed dental restorations, namely veneers, single crowns, and four-unit fixed partial dental prosthesis (FPDs) using two different 3D printers and polymer-based materials. Materials and Methods: A standard maxillary polyurethane jaw model containing prepared teeth was scanned using an intraoral scanner. The generated STL data were used to design the restorations virtually using CAD software. Two 3D printers were utilized for the provisional digital light processing and stereolithography for the castable resin patterns. Each printer produced 10 specimens of each type of restoration, for a total of 80 restorations. The 3d-printed restorations were then 3D scanned using the same intraoral scanner and evaluated for external and internal dimensional accuracy in terms of trueness and precision. A one-way ANOVA and Two-sample T-Test were implemented to compute the precision (variability between groups) and trueness (with the designed CAD model). A level of statistical significance of p-Value

The prevalence of HIV infections in the province of Papua is rising. The study aimed to examine the effect of a sexual reproductive health-based HIV prevention program on knowledge, subjective norms, and attitudes, as well as the behavior control of reproductive health and HIV prevention. A quasi-experimental study was applied in this study with an equivalent control group. The total of 289 students is divided into the experimental group (n = 134) and the control group (n = 155). The experimental group received the sexual reproductive health-based HIV prevention program. The control group received the routine program from the school. The results found a significant difference in knowledge, subjective norms and attitudes, and behavior control of reproductive health and HIV prevention among intervention groups before and after receiving the Sexual Reproductive Health School-Based HIV Prevention program (p-value

Electromagnetic actuation can support many fields of technology, such as robotics or biomedical applications. In this context, fully understanding the system behavior and proposing a low-cost package for feedback control is challenging. Modeling the electromagnetic force is particularly tricky because it is a nonlinear function of the actuated object’s position and coil’s current. Measuring in real time the position of the actuated object with the precision required for accurate motion control is also nontrivial. In this study, we propose a novel, cost-effective electromagnetic set-up to achieve position control via visual feedback. We actuate vertically and under different experimental conditions a 10 mm diameter steel ball hanging on a low-stiffness spring, demonstrating good tracking performance (the position error remains within ±0.5 mm with a negligible phase delay in the best scenarios). The experimental results confirm the feasibility of the proposed set-up, which is characterized by minimum complexity and realized with off-the-shelf and cost-effective components. For these reasons, such a contribution helps to understand and apply electromagnetic actuation even further.

Dysmenorrhea symptoms are frequent and often self-treated using non-prescription medicines. To further characterize women with dysmenorrhea using a combination of hyoscine butylbromide and paracetamol (PLUS) for self-management of their complaints, we performed a secondary analysis of a published pharmacy-based patient survey. 314 women (mean age 32.3 years) with dysmenorrhea reported a pain and cramps intensity of 7.45 ± 2.13 on a 0-10 Likert scale, which was reduced to 2.86 ± 1.81 upon treatment. Associated impairments of work/daily chores, leisure activities, and sleep were improved by 64.6%, 62.2% and 70.4%, respectively. The onset of symptom relief was within 60 min in 84.7%. Tolerability was rated as very good or good by 97.2%. These findings confirm the efficacy and tolerability data on PLUS from randomized controlled trials in a larger group of women conducting self-management of their dysmenorrhea.

Recently, interest in STEM education has grown among researchers and educators, also considering the skills required to address the challenges of the 21st century. Supporting learning in STEM subjects is an open challenge, especially during secondary education, which is reflected in the implementation of innovative pedagogical practices, including approaches focused on Game-Based Learning (GBL). This study analyzed the main issues addressed by research on game-based educational approaches applied to STEM teaching and learning in secondary school and their evolving trends. A text analysis of abstracts published in the past decade was conducted using T-lab software. The “Word Analysis” function was used for preliminary visual mapping; then the “Specificity Analysis” and “Thematic Analysis of Elementary Contexts” functions were applied to explore changes in research directions and to map the themes covered by the most recent studies. The results showed that the implementation of games in STEM disciplines is a promising area of inquiry. A shift in research directions also emerged, currently more focused on studying how GBL can foster engagement and the emotional component of learning. Adapting to rapidly changing technology and integrating essential skills such as coding and computational thinking are additional challenges that the research community is facing.

Human action recognition (HAR) based on skeleton data is a challenging yet important technique because of its wide range of applications in many fields, including patient monitoring, security surveillance, and observing human-machine interactions. Many algorithms that attempt to distinguish between many types of activities have been proposed. However, most practical applications require highly accurate detection of specific types of activities. In this study, a novel and highly accurate spatiotemporal graph autoencoder network for HAR based on skeleton data is proposed. Furthermore, an extensive study was conducted using different modalities. For this purpose, a spatiotemporal graph autoencoder that automatically learns spatial as well as temporal patterns from human skeleton datasets was built. The powerful graph convolutional network named GA-GCN, developed in this study, notably outperforms most of the existing state-of-the-art methods based on two common datasets, namely NTU RGB+D and NTU RGB+D 120 . On the first dataset, we achieved an accuracy of 92.3% and 96.7% based on the cross-subject and cross-view evaluations, respectively. On the other more challenging dataset (i.e. NTU RGB+D 120), GA-GCN achieved 88.8% and 90.4% based on the cross-subject and cross-set evaluation, respectively.

Agriculture is an important sector of European Union in societal , economic and environmental dimensions. Sustainability of the sector require improvements in its key operations. Weeding is one of the crucial operation having impact on farms’ productivity, safety for farmers, food security and environmental state. To achieve EU policy goals of sustainable agriculture there are needed new technical and organizational solutions. One of the advanced techniques are laser based weeding technique. It is important to understand well the impacts of introduction of these tech-niques to the markets and agricultural practice in sustainability context. For that reason Social Life Cycle Assessment was performed. The method was based on participatory approach. The as-sessment was carried in three perspectives: general society, farmers, and business perspective re-lated to agriculture. Expert interviews based on questionnaires and workshops were realized to get the opinions on the impacts of a new laser technique on particular aspects of its implementation. The results show generally positive impact in all perspectives, especially in the perspective of farmers.

Background: This study aimed to develop and evaluate a dietary self-care promotion program for hemodialysis patients based on Hurley's self-efficacy model. Methods: The needs of hemodialysis patients were identified, and an online community-based dietary self-care promotion program was developed with expert evaluations. 44 hemodialysis patients were randomly assigned to an experimental group (n=22) and a control group (n=22). The program was applied to the experimental group for four weeks. Before and after the intervention, as well as four weeks after the intervention, dietary self-efficacy, dietary self-care behavior, interdialytic weight gain, serum phosphorus, and serum potassium were assessed in both groups. Results: Significant differences over time and between groups were observed in dietary self-efficacy, interdialytic weight gain, serum phosphorus, and serum potassium. The interaction between time and group was also significant. While no significant differences were found over time in dietary self-care behavior, significant group differences and interaction effects between time and group were identified. Conclusions: The results indicate that the dietary self-care promotion program using an online community for hemodialysis patients is more effective in enhancing dietary self-efficacy and dietary self-care behavior compared to conventional treatment. This suggests the clinical applicability of the proposed dietary self-care promotion program.

This study focuses on enhancing controllable fibrin-based hydrogels for tissue engineering, addressing existing weaknesses. By integrating a novel copolymer, we improve the foundation for cell-based angiogenesis with adaptable structural features. Tissue engineering often faces challenges like waste disposal and nutrient supply beyond the 200 µm diffusion limit. Angiogenesis breaks through this limitation, allowing the construction of larger constructs. Our innovative scaffold combination significantly boosts angiogenesis, resulting in longer branches and more capillary network junctions. The copolymer attached to fibrin fibers enables precise adjustment of hydrogel mechanical-dynamic properties for specific applications. Our material proves effective for angiogenesis, even under suppression factors like suramin. In our study, we prepared fibrin-based hydrogels with and without the copolymer PVP12400-co-GMA10mol%. Using a co-culture system of human umbilical vein endothelial cells (HUVEC) and mesenchymal stem cells (MSC), we analyzed angiogenetic behavior on and within the modified hydrogels. Capillary-like structures were reproducibly formed on different surfaces, demonstrating the general feasibility of three-dimensional endothelial cell networks in fibrin-based hydrogels. This highlights the biomaterial's suitability for in vitro pre-vascularization of biohybrid implants.

Robotic odor source localization (OSL) is a technology that enables mobile robots or autonomous vehicles to find an odor source in unknown environments. An effective navigation algorithm that guides the robot to approach the odor source is the key to successfully locating the odor source. While traditional OSL approaches primarily utilize an Olfaction-only strategy, guiding robots to find the odor source by tracing emitted odor plumes, our work introduces a fusion navigation algorithm that combines both vision and olfaction-based techniques. This hybrid approach addresses challenges such as turbulent airflow, which disrupts olfaction sensing, and physical obstacles inside the search area, which may impede vision detection. In this work, we propose a hierarchical control mechanism that dynamically shifts the robot’s search behavior among four strategies: crosswind maneuver, Obstacle-avoid Navigation, Vision-based Navigation, and Olfaction-based Navigation. Our methodology includes a custom-trained deep-learning model for visual target detection and a moth-inspired algorithm for Olfaction-based navigation. To assess the effectiveness of our approach, we implemented the proposed algorithm on a mobile robot in a search environment with obstacles. Experimental results demonstrate that our Vision and Olfaction Fusion algorithm significantly outperforms Vision-only and Olfaction-only methods, reducing average search time by 54% and 30%, respectively.

Oak woodlands are a keystone ecosystem that may not be sustainable under ongoing fire management regimes and climate change. For example, in 2014, sassafras saplings started to emerge in degraded woodlands at the 1200 ha Drury Conservation Area as part of research at the Bull Shoals Field Station in Taney County, Missouri where burning was initiated in 1999. After Spring (March) 2021 burnt, we examined trend in the potential community and ecosystem effects, we assessed sapling density, height, and specific leave weigh (SLW) of white oak and sassafras (<1.0 m) from fall 2021 through fall 2022. In fall 2021, sassafras density was 560/0.1ha with mean height of 25.42cm and SLW of 0.00436g/cm² while white Oak density was 171/0.1ha with mean height of 10.2cm and SLW of 0.00680g/cm. However, in fall 2022, Sassafras density was 582/0.1ha with mean height of 71.689cm and SLW of 0.00366 g/cm² meanwhile, white Oak density was 213/0.1ha with mean height of 50.544cm and SLW of 0.00563 g/cm². We analyzed mass loss for sassafras and white oak after buried for 198 days. The weight loss for sassafras was 0.857g while oak was 0.790g for 61 days of buried. Subsequent sassafras weight loss was 1.942g, 3.343g, 4.222g and 4.82g while that of white Oak was 1.877g, 2.862g, 3.344g and 4.28g for day 105, 153 and 198 respectively. The nutrients composition and carbon sequestration of sassafras and white oak species need to be determined to better understand the effect of their dominance in fire management regime of degraded oak woodland in Southwest Missouri Ozarks.

Background and objective: Obesity is a growing global epidemic. The composition of the intestinal microbiota can be influenced by several factors. Studies highlight the role of intestinal bacteria in the pathophysiology of obesity. So, the objective of this study was to investigate whether the use of probiotics, together with healthy lifestyle habits, contributes to weight reduction in obese indi-viduals by analyzing the intestinal microbiota profile. Methods: A prospective study was carried out with 45 adults with obesity. Participants underwent guidance on healthy lifestyle habits, re-ceived a probiotic component containing different microbiological strains and were followed for 60 days. Clinical parameters, body composition, biochemical analysis and intestinal microbiota assessment were performed before and after treatment. After 60 days, it was observed that the bacterial strains present in the probiotic were present in the patients' intestinal microbiota. Par-ticipants also showed improvements in physical activity, sleep quality, anxiety management, as well as changes in some eating habits, such as a reduction in the consumption of processed foods and a significant increase in water intake. Results: A reduction in BMI, fasting glucose, insulin, HOMA-IR, LDL cholesterol and triglycerides was observed, in addition to an increase in HDL cholesterol, improvement in bowel movement frequency and stool consistency. Analysis of the intestinal microbiota revealed an increase in microbial diversity and a better balance between the bacterial phyla Firmicutes and Bacteroidetes. Conclusions: The changes related to improving the composition of the intestinal microbiota, dietary habits, increased physical activity, reduced anxiety, and better sleep quality have significantly contributed to weight loss and improvements in physiological parameters in obese individuals.

Treatment wetlands (TWs) are Nature-Based Solutions increasingly used worldwide for wastewater (WW) treatment able to remove mineral and organic pollutants through both physical and biochemical process. Besides the reusable effluent, the TWs produce as main output plant biomass that need to be harvested and disposed at least once a year with significant management costs and TW temporary out of service. This study aims (i) to evaluate the potential of TWs biomass for local energy production and (ii) to understand TW hydraulic conductivity (Ks) effects on the biomass biomethane yield. Specifically, it was addressed by determining the Biochemical Methane Potential of common reed (CR) (Phragmites australis) samples collected at three harvest times from the 10-years-old horizontal subsurface treatment wetland (HSTW) used as a secondary WW treatment system for the IKEA® store located in Catania (Eastern Sicily, Italy). Furthermore, the falling head test was conducted to assess the hydraulic conductivity (Ks) variation in the HSTW, in order to understand the influence on the CR biomethane production. Average methane content values were 130.57 Nm3CH4/tVS (±24.29), 212.70 Nm3CH4/tVS (±50.62) and 72.83 Nm3CH4/tVS (±23.19) in August, September, October 2022, respectively. Ks was correlated with both dry matter (R2 = 0.58) and fiber content (R2 = 0.74) and, consequently, affected the biomethane yield that increased at the Ks increases (R2 = 0.30 in August, R2 = 0.57 in September). In the framework of a circular economy, results showed the successfully possibility of integrating the bioenergy production into TWs. The research could contribute (i) to encourage plant operators to reuse biomass from TWs for local energy production and (ii) to help plant operators to understand Ks effects on the biomass biomethane yield, in order to increase the sustainability of the system and to reduce the maintenance costs.

Despite saltmarshes being considered as nature-based solutions (NbS) towards climate change mitigation, India’s saltmarsh ecosystems are least studied. This study quantifies the seasonal variation in carbon stocks mono-specific saltmarsh species (Porteresia coarctata) and its potential to play an important role in India’s climate change mitigation plans. Seasonal (pre-and post-monsoon) sampling of P. coarctata surface water, biomass and 30 cm sediment core was collected across four locations on the east coast of India to quantify sediment dry bulk density (DBD), organic matter (OM%), organic carbon (Corg%), Corg stocks of sediment and biomass, total carbon (C%) and nitrogen (N%) and stable isotopes of δ13C and δ15N. In general, the sediment DBD, OM and Corg of P. coarctata meadows was higher in post-monsoon and was influenced by salinity and pH changes. Isotope (δ¹³C) modelling of various sediment C sources suggested, particulate organic matter (POM) contribution was highest (0.04-0.79%) followed by P. coarctata (0.01–052%) and other macrophytes across our study locations. The seasonal variation of δ¹³C showed increased contribution of marine derived particulate and dissolved organic matter into P. coarctata meadows in post-monsoon season. Heavier δ¹⁵N values were observed in post-monsoon season suggesting anthropogenic input, that was utilized by P. coarctata to increase its above and below-ground biomass and shoot density. The combined ecosystem (30 cm sediment + biomass) Corg stocks of P. coarctata was 1.7-fold higher in post-monsoon (4021.20± 917 Mg C) compared to pre-monsoon (2297.36 ±647 Mg C) season among the four locations with a sediment Corg contribution >70%. Based on the International Panel for Climate Change Tier II assessment the P. coarctata meadows (443 ha) can help in avoiding the pre and post-monsoon emissions of 8431.34 and 14757.84 Mg CO₂ respectively. The combined price of the total CO₂ equivalent stored in P. coarctata meadows in pre- and post-monsoon is US$ 14.50 and US$ 25.38 million respectively. Further studies quantifying the NbS potential of P. coarctata mono-specific and mixed meadows of India’s coast is needed along with integration of saltmarsh ecosystems into India’s National Action Plan on Climate Change.

This review highlights the potential and limitations of mRNA vaccines with a particular focus on mucosal delivery as an alternative to parenteral administration. The strengths of mRNA vaccines are: a) Versatility: they can be adapted to target a wide range of pathogens; b) Faster development: designed and produced more quickly than traditional vaccines; c) High efficacy: effective in preventing severe disease, as demonstrated during the COVID-19 pandemic. Current challenges: a) Delivery: current methods (mainly intramuscular injection) may not be optimal for inducing mucosal immunity; b) Stability: mRNA is fragile and needs to be protected from degradation; c) Safety: potential side effects, including myocarditis, blood clotting, allergic reactions need further investigation. Mucosal delivery could be more effective in preventing the transmission of pathogens and is generally better accepted by the population. Pros: offers the potential to induce local immunity at the site of pathogen entry, potentially providing broader protection; Cons: developing effective delivery systems and adjuvants for mucosal delivery is difficult. Extracellular vesicles as a mucosal delivery system are promising and offer a potentially safe, scalable, and needle-free approach. Future directions: a) Optimizing mRNA constructs: strategies like codon optimization and self-amplifying RNA can improve stability and translation efficiency; b) Rigorous pre-clinical studies are essential before human trials.

Wastewater-Based Epidemiology (WBE) is currently used to monitor not only the spread of the pandemic virus SARS-CoV-2 but also for other viruses in endemic conditions, particularly in the absence of syndromic surveillance. Continuous monitoring of sewage requires high costs and significant time investment, highlighting the need for standardized methods and structured monitoring strategies. In this context, we conducted weekly wastewater monitoring in northwestern Italy, targeting Human Adenovirus (HAdV), Norovirus Genogroup II (NoVggII), Enterovirus (EV), and SARS-CoV-2. Samples collected at the entrance of treatment plants were concentrated using PEG/NaCl precipitation and viral nucleic acids were extracted and detected by real-time (RT-)qPCR. NoVggII resulted the most identified target (84.4%), followed by HAdV, SARS-CoV-2, and EV. Only HAdV and EV exhibited seasonal peaks in spring and summer. SARS-CoV-2 results compared with data previously collected in the same study area (February 2021 to September 2021) revealed a shift from an epidemic to a pandemic status, likely due to the evolution of variants. In conclusion, WBE, using standardized methods and an efficient monitoring strategy, proves valuable for virus surveillance in pandemic and epidemic scenarios, enabling the identification of temporal-local distribution patterns that are useful for making informed public health decision.

Most recent university campuses follow the North American model, built on city limits or countryside, with large separate buildings in open green spaces. Studies suggest that prevalence and severity of mental health issues among university students are increasing over the past decade in most countries. University services were created to face this growing problem, however individual based interventions have limited effects on mental health and well-being of a large population. Our aim was to verify if and how the natural environment in Campuses is focused on programs to cope with the issue of mental health and well-being among students. Systematic review of literature was undertaken with search in Scopus and LILACS with the keywords “green areas” AND “well-being” AND “Campus”, following PRISMA guidelines. As a result, 32 articles were selected. Research on the topic is recent, mostly in the USA, Bulgaria, and China. Most studies used objective information on campuses’ greenness and/or university students’ perception. Mental health was usually measured by validated scores. Findings of all the studies indicated positive association between campus greenery and well-being of students. We conclude that there is a large potential for use of university campuses in programs and sites for students´ restoration and stress relief.

To address the issue of traditional static evaluation models being unable to comprehensively analyse the performance of ultra-supercritical coal-fired units under varying loads, we propose a dynamic comprehensive evaluation model based on the improved Criteria Importance Through Inter-criteria Correlation (CRITIC) method and Entropy Weight Method (EWM). The comprehensive performance evaluation index system of ultra-supercritical coal fired units is constructed by examining the boiler performance, turbine performance, plant power performance, environmental performance, and flexible performance of coal powered units. The CRITIC and EWM methods are used to calculate the weights of the indicators, which are then combined with the static evaluation results. Using a dynamic comprehensive evaluation model, we analysed ultra-supercritical coal-fired units, taking into account time weight. This allowed us to obtain the comprehensive dynamic real-time evaluation value of the units under different loads. The research indicates that the dynamic comprehensive evaluation model, which uses an improved CRITIC and EWM, has significant advantages in improving evaluation accuracy, weight-balanced distribution, and generality. Provides more accurate, reasonable, and reliable evaluation results for practical decision making.

Before December 2020, Antarctica had remained free of Covid-19 cases. The main concern during the pandemic was the limited health facilities available at Antarctic stations to deal with the disease, as well as the potential impact of SARS-CoV-2 on Antarctic wildlife through reverse zoonosis. In December 2020, 60 cases emerged in Chilean Antarctic stations, disrupting the summer campaign with ongoing isolation needs. The SARS-CoV-2 RNA was detected in the wastewater of several scientific stations. In Antarctica, treated wastewater is discharged directly into the seawater. No studies currently address recovery of infectious virus particles from treated wastewater, but their presence raises the risk of infecting wildlife and initiating new replication cycles. This study highlights the initial virus detection in wastewater from Antarctic stations, identifying viral RNA via RT-qPCR targeting various genomic regions. The virus's RNA was found in effluent from two wastewater plants at Maxwell Bay and O’Higgins Station on King George Island and the Antarctic Peninsula, respectively. This study explores the potential for reverse zoonotic transmission of SARS-CoV-2 from humans to Antarctic wildlife due to the direct release of viral particles into seawater. The implications of such transmission underscore the need for continued vigilance and research.

The protection of grapevine from the diseases is now particularly focused on the development of environmentally friendly strategies. Although sulphur is not in itself a toxic substance, a large use towards powdery mildew, in organic vineyards especially, may cause problems to environment, health and safety of viticultural workers and plant phytotoxicity. The activity on powdery mildew of sulphur applied at doses reduced up to 50% in tank mixtures with silicates and Equisetum arvense based products, never tested on grapevine, was assessed. Two-year trials were carried out applying the products every 7-9 days in the period of greatest risk for spring ascosporic infections, in two organic vineyards in the Abruzzo region, Italy. The effectiveness towards the disease of the mixtures was demonstrated, often to a greater extent than that of full-dose sulphur, normally used in the vineyards. Furthermore, in vines treated with the mixtures, increases in yield quantity and quality, such as higher contents of soluble solids and lower levels of total acidity, have been shown. Due to the strong efficacy demonstrated on the leaves, silicon-based products + sulphur mixtures can also be recommended in eradicative applications, aimed at reducing the inoculum of the disease. The great activity of the mixtures demonstrated in this study suggests confirmation through further investigations on different cultivars and vine-growing areas at different levels of infection, also testing the effectiveness of individual silicon products against the disease.

Technological advancements must keep pace with earth’s rising demand for energy, while minimizing the carbon footprint on earth. One such option is using space based solar (SBS) radio frequency (RF) microwave power beaming. This innovative and novel technology is currently being explored to address terrestrial photovoltaic (PV) intermittency and provide a method to transmit power to other spacecraft in various orbits. This modality of power generation and distribution presents a new way to power terrestrial off-grid applications and earth orbiting spacecraft. In 1968, Dr. Peter Glaser published "Power from the Sun: Its Future", which serves as the foundation of this paper to revitalize scientific interest and efforts in this topic. This paper will primarily focus on the reliance of SBS initiatives on reusable launch vehicles (RLV) to place SBS spacecraft in a designated orbit, as well as the technological, economic, and operational challenges associated with power beaming to earth and other spacecraft. This includes a discussion of the variables from the operational environment that contribute or accelerate spacecraft end of life.

Large-scale crowd phenomena are complex to model because the behaviour of pedestrians needs to be described at both strategic, tactical, and operational levels and is impacted by the density of the crowd. Microscopic models manage to mimic the dynamics at low densities, whereas mesoscopic models achieve better performances in dense situations. This paper proposes and evaluates a novel agent-based architecture to enable agents to dynamically change their operational model based on local density. The ability to combine microscopic and mesoscopic models for multi-scale simulation is studied through a use case of pedestrians at the Festival of Lights, Lyon, France. Pedestrian outflow data is extracted from video recordings of exiting crowds at the festival. The hybrid model is calibrated and validated using a genetic algorithm that optimizes the match between simulated and observed outflow data. Additionally, a local sensitivity analysis is then conducted to identify the most sensitive parameters in the model. Finally, the performance of the hybrid model is compared to different models in terms of density map and computation time. The results demonstrate that the hybrid model has the capacity to effectively simulate pedestrians across varied density scenarios while optimizing computational performance compared to other models.

The lung microbiota is a complex community of microorganisms that colonize the respiratory tract of individuals from or even before birth. Although the lungs were traditionally believed to be sterile, recent research has shown that there is a diversity of bacterial species in the respiratory system. Knowledge about the lung microbiota in the newborn and its relationship with bacterial infections is of vital importance to understand the pathogenesis of respiratory diseases in neona-tal patients undergoing mechanical ventilation. In this article, the current evidence on the compo-sition of the lung microbiota in the newborn will be reviewed, as well as its role in the develop-ment of bacterial infections in mechanically ventilated neonates. Although advances in many as-pects of the neonatal intensive care unit care have significantly improved the survival of preterm infants, the diagnosis and treatment of ventilator-associated pneumonia has not progressed in recent decades. Avoiding dysbiosis caused by inappropriate use of antibiotics around birth, as well as avoiding intubation of patients or promoting early removal of endotracheal tubes are among the most important preventive measures for ventilator-associated pneumonia. The use of probiotics and prebiotics to prevent infectious, allergic or metabolic complications in the short or long term constitutes a very important field of research in perinatal medicine.

Machine learning models are increasingly being used in critical domains, but their complexity, lack of transparency, and poor interpretability remain problematic. Decision trees (DTs) and rule-based approaches are well-known examples of interpretable models, and numerous studies have investigated techniques for approximating tree ensembles using DTs or rule sets; however, tree ensemble approximators do not consider interpretability. These methods are known to generate three main types of rule sets: DT-based, unordered-based, and decision list-based. However, no known metric has been devised to distinguish and compare these rule sets. Therefore, the present study proposes an interpretability metric to allow comparisons of interpretability between different rule sets, such as decision list- and DT-based rule sets, and investigates the interpretability of the rules generated by the tree ensemble approximators. To provide new insights into the reasons why decision list-based and inspired classifiers do not work well for categorical datasets consisting of mainly nominal attributes, we compare objective metrics and rule sets generated by the tree ensemble approximators and the \textit{Recursive-Rule eXtraction algorithm (Re-RX) with J48graft}. The results indicated that \textit{Re-RX with J48graft} can handle categorical and numerical attributes separately, has simple rules, and achieves high interpretability, even when the number of rules is large.

In an increasingly complex world there is a real, urgent need for methodologies to enable engineers to model complex sociotechnical systems, as these now seem to describe the majority of systems in use today. This is of course exacerbated by the increasing involvement and augmentation with “black box” AI contributions. Hollnagel produced a methodology, (FRAM) which did allow the analyst in-sights into these systems’ behaviour, but the model-based system engineering applications demand numbers and a quantitative ap-proach. In the last 10 years, this original approach developed to model systems as sets of interactive, interdependent “functions”, (abstracted from agent or component details), has been further developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, and can pull it all together into dynamic models, (as opposed to static, fixed System Theoretic Process Accimaps), from which analysts can discern how they really work in practice, and predict the emergent behaviours characteristic of complex systems. This paper describes how the FRAM methodology has now been extended to provide these extra, essential attributes. It also describes its implementation using an open-source software, freely available for use and verification on the GitHub site.

OBJECTIVE: Cervical cancer is a major cause of cancer-related mortality, necessitating effective screening and diagnostic methods. This study aimed to assess the performance of cervicovaginal smear (CVS) and Human papilloma virus (HPV)-DNA cotest. STUDY DESIGN: The pathology results of 225 female patients who underwent HPV-DNA testing with CVS between 2014 and 2022 and were subsequently diagnosed by colposcopic cervical biopsy or second CVS were retrospectively analyzed. RESULTS: CVS samples showed Atypical Squamous Cells of Undetermined Significance (ASCUS), Low-grade squamous intraepithelial lesion (LSIL), High-grade squamous intraepithelial lesion (HSIL) and cervical cancer. Concordance between the first and second diagnoses demonstrated moderate agreement for LSIL. ASCUS cases exhibited a significant correlation with HPV-DNA positivity and higher-grade cervical lesions. In biopsy, sensitivity and specificity for CIN 2 were 67.8% and 67.9%, respectively, while for CIN 3, they were 81.8% and 58.5%. HPV testing showed significant correlation with histopathologic results. In women over 40 years, more intraepithelial lesions were diagnosed compared to younger women (p<0.005). The conventional smear technique proved reliable in detecting high-grade lesions. CONCLUSION: Despite the limitations of our study, our results emphasize the value of HPV-DNA testing to avoid unnecessary interventions and to establish appropriate follow-up strategies.

Abstract:The digital landscape is rapidly reshaping under the influence of AI-powered cloud-based e-commerce platforms (PCEPs). These platforms leverage the transformative power of AI to personalize customer experiences, optimize pricing strategies, enhance security, and streamline operations, offering businesses a significant competitive edge. However, challenges surrounding data privacy, algorithmic bias, and potential job displacement raise crucial ethical questions regarding widespread AI adoption in e-commerce.This study delves into the untapped potential and ethical considerations of PCEPs, distinguishing itself by proposing practical strategies for responsible development and ethical implementation.Objectives: Investigate the transformative potential of PCEPs: Personalized product recommendations:Analyze effectiveness and potential bias. Dynamic pricing strategies:Explore impact on consumer fairness and market stability. Enhanced fraud detection:Evaluate accuracy and privacy implications. Optimized supply chain management:Assess efficiency gains and job displacement risks. Critically analyze the ethical considerations of AI in e-commerce: Data privacy:Assess current practices and develop mitigation strategies. Algorithmic bias:Identify potential sources and propose solutions for fairer decision-making. Job displacement:Evaluate impacts and propose reskilling initiatives. Propose comprehensive and practical strategies for responsible PCEP development and implementation: Transparency:Enhance user awareness and control over data usage. Fairness:Design AI systems to mitigate bias and uphold consumer rights. Accountability:Establish clear guidelines and oversight mechanisms for ethical AI development.Conclusion: While PCEPs offer a plethora of transformative benefits, their ethical implementation is paramount. By adhering to principles of transparency, fairness, and accountability, businesses can unlock the full potential of PCEPs while minimizing potential risks and shaping the future of online commerce in a sustainable and equitable manner

Healthcare visits were reduced during COVID-19 pandemic causing the disturbance of the sustainability in NAFLD monitoring. Telemedicine acts to maintain connectivity between patients and healthcare professionals. This review aimed to assess telemedicine helps to monitoring in NAFLD. The database was searched from The PubMedCentral and ScienceDirect from 2020 to 2023. We assessed the Cochrane Risk of Bias (RoB) for randomized controlled trial (RCT) and the Newcastle-Ottawa scale for non-RCTs systematic reviews. Meta-analyses with random-effects model to determine the pooled mean difference (MD) and p-value. There were three RCT and two non-RCT were included (n=239) with 56.9% males and the mean age was 51.3 years. Median intervention lasted 5.5 months. The parameter were body weight (BW), body mass index (BMI), waist circumference, liver function (AST/ALT), lipid profile and HbA1c. Metaanalysis showed telemedicine had a significant effect on improving outcomes for BW (MD -2.81: 95% CI, -4.11, -1.51, P 0.0001) and BMI (MD -1.01: 95% CI, -1.47, -0.55, P 0.0001) compared to standard care, while the AST/ALT were not significantly reduced. Other laboratory parameter were decreased from systematic reviews. Telemedicine through mobile-based applications could be an option for monitoring body weight and BMI in NAFLD patients facing the pandemic.

The evolution of photovoltaic cells is intrinsically linked to advancements in the materials from which they are fabricated. This review paper provides an in-depth analysis of the latest developments in silicon-based, organic, and perovskite solar cells, which are at the forefront of photovoltaic research. We scrutinize the unique characteristics, advantages, and limitations of each material class, emphasizing their contributions to efficiency, stability, and commercial viability. Silicon-based cells are explored for their enduring relevance and recent innovations in crystalline structures. Organic photovoltaic cells are examined for their flexibility and potential for low-cost production, while perovskites are highlighted for their remarkable efficiency gains and ease of fabrication. The paper also addresses the challenges of material stability, scalability, and environmental impact, offering a balanced perspective on the current state and future potential of these material technologies.

Breast cancer is the most common cancer in women globally, often necessitating mastectomy and subsequent breast reconstruction. Silicone mammary implants (SMIs) play a pivotal role in breast reconstruction, yet their interaction with the host immune system and microbiome remains poorly understood. This study investigates the impact of SMI surface topography on host antimicrobial responses, wound proteome dynamics, and microbial colonization. Biological samples were col-lected from ten human patients undergoing breast reconstruction with SMIs. Mass spectrometry profiles were analyzed for acute and chronic wound proteomes, revealing a nuanced interplay between topography and antimicrobial respondseproteins. 16S rRNA sequencing assessed mi-crobiome dynamics, unveiling topography-specific variations in microbial composition. Surface topography alterations influenced wound proteome composition. Microbiome analysis revealed heightened diversity around rougher SMIs, emphasizing topography-dependent microbial inva-sion. In vitro experiments confirmed staphylococcal adhesion, growth, and biofilm formation on SMI surfaces, with increased texture correlating positively with bacterial colonization. This comprehensive investigation highlights the intricate interplay between SMI topography, wound proteome dynamics, and microbial transmission. The findings contribute to understanding host-microbe interactions on SMI surfaces, essential for optimizing clinical applications and minimizing complications in breast reconstruction.

Congenital malformations are functional and structural alterations in embryonic or foetal development resulting from a variety of factors including maternal health status. This study aimed to investigate the association between maternal birth weight (MBW) and the prevalence of congenital malformations in the offspring using data from a nationwide birth cohort study in Japan including 103,060 pregnancies. A binary logistic regression model with adjustment for various covariates revealed that MBW of &lt;2,500 g (low MBW) was associated with increased risk of congenital heart disease (adjusted odds ratio: 1.388, [95% confidence interval: 1.075–1.792]), angioma (1.491 [1.079–2.059]), and inguinal hernia (1.746, [1.189–2.565]), while MBW of ≥4,000 g (high MBW) with congenital anomalies of the urinary tract (2.194, [1.261–3.819]), and arrhythmia (1.775, [1.157–2.725]), compared with those with MBW of 3,000-3,499 g. Low MBW was associated with cleft lip and/or palate (1.473, [1.052–2.064]), congenital heart disease (1.615, [1.119–2.332]), genital organs(1.648, [1.130–2.405]), hypospadias (1.804, [1.130–2.881]), and inguinal hernia (1.484, [1.189–1.851]) in male infants and CAKUT (1.619, [1.154–2.273]) in female infants, whereas high MBW was associated with congenital heart disease(1.745, [1.058–2.877]) and CAKUT (2.470, [1.350–4.517]) in male infants. The present study is the first to demonstrate a link between MBW and congenital malformations in Japanese children. While these results must be interpreted with caution, MBW should be considered a major predictor of congenital malformation risk.

The proliferation of deep learning in natural language processing (NLP) has led to the development and release of innovative technologies capable of understanding and generating human language with remarkable proficiency. Atinuke, a Transformer-based neural network, optimises performance across various language tasks by utilising a unique configuration. The architecture interweaves layers for processing sequential data with attention mechanisms to draw meaningful affinities between inputs and outputs. Due to the configuration of its topology and hyperparameter tuning, it can emulate human-like language by extracting features and learning complex mappings. Atinuke is modular, extensible, and integrates seamlessly with existing machine learning pipelines. Advanced matrix operations like softmax, embeddings, and multi-head attention enable nuanced handling of textual, acoustic, and visual signals. By unifying modern deep learning techniques with software design principles and mathematical theory, the system achieves state-of-the-art results on natural language tasks whilst remaining interpretable and robust.

Using the potent tools of information geometry (IG), the current research analyses the information geometrics of the five-dimensional HTBFC Manifold. By enabling a unique revolutionary analysis for the performance of Human-Trust Based Feedback Control (HTBFC), the integration of information geometry into HTBFC facilitates the relativistic analysis of the five-dimensional HTBFC manifold. Both the two- and three-dimensional manifold subcases are investigated. This work provides a ground-breaking approach to IG unification of Human- Machine Interactions (HMIs). Some potential applications of HTBFC to robotics are presented.Conclusions are provided, along with some emerging open problems and recommendations for future research.

Keywords: Innovation ecosystems, Economic sustainability, Hydrocarbon-based economies, Economic diversification, Qualitative approach

Safety limits application has always been a traditional approach to ensure the safe operation of electro-mechanical systems within many industries including automated vehicles, robotics, aerospace, traditional automotive, railways, manufacturing, etc. In all of these applications, control and safety limits are usually hard-coded into the production firmware and are fixed throughout the entire product life cycle. Currently, due to the evolving needs of automated systems like automated vehicles and robots, this traditional approach does not address all the use cases and scenarios to ensure safe operation. Especially for data-driven machine learning applications that constantly evolve and learn over time, it is important to be able to adjust the safety limits application strategy to be more flexible and adaptable based on different Operational Design Domains (ODDs) and scenarios. Our ITSC conference paper ~\cite{4} introduced the concept of a new safety limits application strategy called the Dynamic Control Limits Application (DCLA) strategy that supports the flexible application of diverse limits profiles based on the parameters involved within the dynamic scenario at different layers of the Autonomy software stack.This paper extends the DCLA strategy to derive the complete methodology for safety limits application based on ODD elements, scenario identification and scenario classification using Decision Making Engines. It leverages the layered architecture introduced in the ITSC conference paper to implement the Decision Making (DM) algorithms. Another important extension is the use of cloud infrastructure that is based on the Vehicle-to-Infrastructure (V2I) technology to store the scenarios and the limits mapping to serve as a ground truth and/or a backup mechanism in case of errors or failures associated with the main Decision Making (DM) Engine. There is also a focus on providing a more comprehensive list of scenarios and a custom built experimental dataset to cover the maximum ODD elements, and multiple tables of safety limits to be chosen from, which eventually helps in creating different safety limits application profiles. These distinct safety limits application profiles are based on the scenario parameters that are perceived by the system upon which the Decision Making algorithms are applied or trained. This systematic approach can be used within the industry for any of the future automated vehicles and systems until Level 5 Autonomy.

The recent green manufacturing demands have boosted the development of new biodegradable lubricants to replace petroleum-based lubricants. In this regard, water-based lubricants have been at the forefront of recent research for a wide range of industrial applications, including metalworking fluids (MWFs). In this work, we present an experimental investigation on the performance of novel green MWFs based on aqueous nopal mucilage solutions. For this, fully biodegradable solutions with different mucilage concentrations were evaluated in terms of rheological, tribological, thermal stability and turning (minimum quantity lubrication) performance, and compared to a commercial semisynthetic oil-based MWF (Cimstar 60). Mucilage solutions exhibited viscoelastic shear-thinning behavior, which was enhanced along with mucilage concentration. The solution with the highest mucilage content studied resulted in the lowest wear, friction and temperature in comparison to the other solutions and neat water in extreme pressure four-ball tests, and a similar level of lubricity as compared to the commercial MWF in cutting tests. This performance is associated to the enhanced viscosity and elasticity of the solution, as well as to the contents of lipids with fatty acids in the mucilage. Overall, the present results reveal the relevance of the viscoelastic behavior of the lubricant, elasticity in particular, in lubrication processes, and points to nopal mucilage as an effective green additive to produce innocuous MWFs.

“Anti-stripping Agents" or "adhesion promoters” can enhance the chemical affinity between as-phalt and aggregate by increasing their mutual attraction. Various forms of anti-stripping agents have been proposed to mitigate pavement stripping, and siloxane-based Zychotherm is one of them. Choosing the appropriate type and dose of anti-stripping additives is no doubt vital to the intended performance. Therefore, it is critically important to determine the dose of the additives used in the modification of asphalt binders. This research developed a feasible detection method that can closely measure the dose (0.05% and 0.1%) of siloxane-based anti-stripping liquid agents. Related test methods including heat combustion test, residue visualization, burning, and ignition were implemented. Heat combustion results showed that with the addition of Zychotherm anti-stripping additive, average heat combustion value decreased by 1.34% and 1.72% for 0.05% and 0.1% Zychotherm modified binder respectively. In the burning and ignition process, the modified binder leaves yellowish substances in the residue, which is an indication of the presence of Zy-chotherm. The weight of the yellowish residue relates more to the quantity of Zychotherm in as-phalt binder.

Articular cartilage healing and repair is one of the biggest clinical challenges in trauma and orthopaedic medicine, leading to high economic loss due to athletic impairment in sport horses. Multipotent Mesenchymal stem/stromal cells are part of novel therapeutic arsenal aimed at tissue regeneration and restoring organ function. These cells release biomolecules and factors in the culture media, producing the so called conditioned medium, which have a pro-regenerative effect through paracrine mechanisms. Considering this, a therapeutic product combining equine synovial membrane derived Mesenchymal stem/stromal cells and equine umbilical cord stroma-derived Mesenchymal stem/stromal cells conditioned medium was employed. In this work the treatment of two articular defects, in the first phalanx and third metacarpus of the left front limb of a five-year-old horse, is described. Following surgical debridement of the lesions, the treatment comprised two intra-articular administrations of the above-mentioned therapeutic combination, 15 days apart. This was followed by a thorough rehabilitation program. A second-round treatment was performed 6 months later. Diagnostic imaging demonstrated significant improvement of the articular defects. The clinical outcome allowed a full return to the athletic performance demonstrating the safety and potential advantages of this approach when compared with other therapeutic options.

Early-onset colorectal cancer (EOCRC) is defined as a diagnosis of colorectal cancer (CRC) in individuals younger than 50 years of age. While overall CRC rates in the United States (US) decreased between 2001 and 2018, EOCRC rates have increased. This research project aims to evaluate the feasibility and acceptability of Time-Restricted Eating (TRE), Mindfulness, or TRE combined with Mindfulness among young to middle-aged adults at risk of EOCRC. Forty-eight participants will be randomly assigned to one of four groups: TRE, Mindfulness, TRE &amp; Mindfulness, or Control. Data on feasibility, adherence, and acceptability will be collected. Measures assessed at baseline and post-intervention will include body weight, body composition, dietary intake, physical activity, sleep behavior, circulating biomarkers, hair cortisol, and gut microbiome. Effects of the intervention on the following will be examined: 1) acceptability and feasibility; 2) body weight, body composition, and adherence to TRE; 3) circulating metabolic, inflammation, and oxidative stress biomarkers; 4) intestinal inflammation; and 5) the gut microbiome. TRE combined with Mindfulness holds promise for stress reduction and weight management among individuals at risk of EOCRC. The results of this pilot study will inform the design and development of larger trials aimed at preventing risk factors associated with EOCRC.

Machine learning has become more prevalent as a tool used for biogeochemical analysis in agricultural management. However, a common drawback of machine learning models is the lack of interpretability, as they are black boxes that provide little insight into agricultural management. To overcome this limitation, we compared three tree-based models (decision tree, random forest, and gradient boosting) to explain soil organic matter content through Shapley additive explanations (SHAP). Here, we used nationwide data on field crops, soil, terrain, and climate across South Korea (n = 9,584). Using the SHAP method, we identified common primary controls of the models, for example, regions with precipitation levels above 1400 mm and exchangeable potassium levels exceeding 1 cmol+ kg-1, which favor enhanced organic matter in the soil. Different models identified different impacts of nutrients on the organic matter level in the soil. The SHAP method is practical for assessing whether different machine learning models yield consistent findings in addressing these inquiries. Increasing the explainability of these models means determining essential variables related to soil organic matter management and understanding their associations for specific instances.

Modern power systems are confronted with a spread concern on the frequency stability issue due to the widespread integration of randomly fluctuating renewable resources. To address the above concern, this work introduces a load frequency control (LFC) scheme based on a hydrogen based energy-storage unit and a parameter tuning strategy for fractional-order proportional-integral-derivative (FOPID) controller. Firstly, a two-area interconnected power system (IPS) model, including thermal, hydro, solar, wind, gas power generator, and hydrogen based energy-storage unit, is established. Then, a FOPID controller is designed for this IPS model, and an improved gradient-based optimizer (IGBO) is developed to adaptively regulate the parameters of the FOPID controllers. Finally, the effectiveness of the offered LFC scheme are tested through load disturbance and renewable energy fluctuations test scenarios, and provides comparison and robustness analysis among different schemes. The test results validated that the offered LFC scheme can effectively suppress the frequency fluctuations of IPS and has excellent robustness.

Structural health monitoring (SHM) is critical for ensuring the safety of infrastructures like bridges. This article presents a digital twin solution for SHM of railway bridges using low-cost wireless accelerometers and Machine Learning (ML). The system architecture combines edge on-premises computing and cloud analytics to enable efficient real-time monitoring and complete storage of relevant time-history datasets. After train crossings, accelerometers stream raw vibration data, which is processed in the frequency domain and analyzed via machine learning to detect anomalies indicating potential structural issues. The digital twin approach is demonstrated on an in-service railway bridge, where vibration data was collected over two years under normal operating conditions. By learning allowable ranges for vibration patterns, the digital twin model identifies abnormal spectral peaks, suggesting changes in structural integrity. The long-term pilot proves that this affordable SHM system can provide automated and real-time warning of bridge damage and also supports the use of in-house designed sensors of lower-cost and edge computing capabilities than those used in the demonstration. The successful on-premises-cloud hybrid implementation provides a cost effective and scalable model for expanding monitoring to thousands of railway bridges, democratizing SHM to improve safety by avoiding catastrophic failures.

AbstractBackground: Empowering Communities, Combating HIV/AIDS: The Indispensable Role of Community-Based Strategies in Awareness and PreventionObjective: Highlight the significance of community-based approaches in addressing the ongoing HIV/AIDS pandemic through enhanced awareness, reduced stigma, and effective prevention measures.Method: This article provides a theoretical analysis of community-based HIV/AIDS interventions, drawing upon key strategies and successful examples from diverse settings.Results: Community-based initiatives emerge as critical factors in empowering individuals and communities to take ownership of their health. Through culturally-sensitive education, accessible testing, and comprehensive support services, these initiatives effectively diminish the social stigma surrounding HIV/AIDS and promote preventative behaviors. Examples of successful programs illustrate the potential of community-driven approaches to achieve measurable reductions in transmission rates and improved health outcomes.Conclusion: The fight against HIV/AIDS necessitates robust community engagement. Community-based interventions, grounded in local knowledge and addressing specific needs, offer a promising pathway towards fostering health equity, reducing stigma, and ultimately curtailing the spread of the virus. Further research and investment in these initiatives are crucial to ensuring their scalability and sustained impact on global HIV/AIDS prevention efforts.

We have successfully synthesized a series of Bi doped BaFe2As2 high quality single crystals for the first time. The x-ray diffraction (XRD) patterns show an expansion of lattice parameter c with Bi doping, indicating a negative pressure effect. By investigating the resistivity, a Fermi liquid (FL) to non-Fermi liquid (NFL) crossover is observed from normal state to antiferromagnetic order state, accompanied by three superconducting transitions labeled as SC I, SC II and SC III which are supposed to be induced from three superconducting realms with various Bi concentration. Thus, the NFL behavior is proposed to be closely related with the presence of superconductivity. The magnetic susceptibility measurements further speculates that the SC I and SC III phases should be filamentary superconductivity while the SC II be a possible bulk superconductivity with TC 7 K.

In an IoT system, the sheer volume of data generated by numerous sensing devices necessitates a well-designed scheme for storing and retrieving data efficiently, enabling streamlined data processing and analytics. One promising storage architecture involves utilizing solid-state drives (SSDs) to cache data from hard disk drives (HDDs), thereby creating an SSD-based caching storage system. To further enhance access performance, it is possible to employ readahead techniques to minimize data access latency. However, the existing Linux readahead scheme falls short in fully leveraging SSD-based caching storage systems. We address this limitation by introducing a novel cross-layered readahead architecture that effectively communicates with the VFS layer, the file system layer, and the block I/O layer. This communication facilitates the acquisition of readahead timing, readahead data continuity, and readahead data location, respectively. To guide prefetching decisions, our architecture analyzes the degree of data access sequentiality, the performance model of the target storage device, and the access patterns of the I/O workload on the corresponding storage device. The implementation of this new architecture in the Linux kernel yields promising experimental results, demonstrating its robustness by consistently outperforming the stock Linux kernel. Notably, our architecture reduces the total execution time of the stock Linux kernel by up to 49%, except in cases of random workloads where both the stock Linux kernel and our architecture exhibit similar performance.

To address the large hysteresis and susceptibility to instability in high-speed deposition fusion moulding (FDM) 3D printing’s temperature control, this paper proposes an improved ant-lion optimization algorithm (OCALO) to optimize the PID parameters.The improvement aims to solve the problem that the traditional ant-lion optimization algorithm (ALO) reduces the population diversity and tends to fall into the local optimal solution when it is close to the global optimal solution.The generation of the initial solution is enhanced by the introduction of a new Tent-Logistic-Cotangent composite chaotic mapping. This integration into Elite Opposition-Based Learning aids in optimizing population diversity. Concurrently, the incorporation of cosine factors of a specified parameter into the elitist formula of the traditional ALO algorithm is aimed at reducing the tendency of ants to randomly gravitate towards ant-lions with lower fitness values. This adjustment helps in balancing the exploration-exploitation trade-off in the algorithmic process. Compared with two existing classical algorithms and three improved ALO algorithms, the algorithm improves the convergence speed, global search ability and the ability to jump out of the local optimal solution. The improved algorithm was combined with PID control to design an OCALO-PID temperature controller and simulated on a high-speed 3D printing temperature model identified by modelling. The results show that the method improves the transient and steady-state performance of reactor temperature control with good control accuracy and robustness. Finally, the proposed algorithm is applied to a physical experimental platform to verify the feasibility of the algorithm.

Plantation-based farmer cooperatives play an important role in promoting agricultural modernization and increasing farmer income, and the management of business risks of such cooperatives not only influences the development of the cooperatives themselves, but also concerns the interests of farmers. Based on the survey data of 226 sample cooperatives from Guizhou province, this article uses factor analysis to measure business risks of plantation-based farmer cooperatives and carries out empirical tests on influence factors of business risks through structural equation model. According to the research results, the ordering of business risks of plantation-based farmer cooperative based on their significance is as follows: market risk > policy risk > natural risk > technical risk > management risk. Influence factors including policy environment, economic environment, social service environment, technical environment, resource endowment of the cooperative and manager characteristics have significant positive influence on the cooperative, with economic environment and manager characteristics generating relatively stronger influence and social service environment generating relatively weaker influence. Through this research, several policy implications on driving high-quality development of plantation-based farmer cooperative are made, including specifying supportive policies of plantation-based farmer cooperative, improving economic environment of agricultural market, upgrading agricultural infrastructure, depending reform of land transfer system, and enhancing internal management of the cooperative.

The paper presents an implementation and numerical study of the nonlinear optimal-based vibration control solutions for the full-scale TLP – NREL 5MW wind turbine tower-nacelle model with an MR-damper-based 10 ton tuned vibration absorber (TVA) located at the nacelle, under excessive wave/wind polyperiodic excitations yielding continual transient vibration states. The MR damper operates simultaneously with an electromagnetic force actuator (forming a hybrid TVA), or independently (a semiactive TVA). The study includes both actuators’ nonlinearities and dynamics, whereby the former are embedded in the Hamilton-principle-based nonlinear control solutions. As a reference, the structure model with a passive TVA, with a modified ground-hook control law, and without any vibration reduction solutions is used. The TVA was tuned either to the NREL 5MW tower-nacelle 1st bending mode frequency (TVA-TN) or to the TLP surge frequency (TVA-TLP). The optimal control task, redeveloped here with regard to the TVA stroke amplitude minimisation, including the implementation of the protected structure’s acceleration (control case III / III-H) and relative displacement terms as well as nonzero velocity term in the quality index, is stated and solved, yielding optimal-based control propositions for both the MR damper current and the actuator force. On the basis of the obtained results, the TVA-TN solution is by far superior to the TVA-TLP one regarding the tower deflection amplitude / root-mean-square (RMS) and TVA stroke amplitude values. All the regarded TVA-TN solutions provide tower deflection safety factor of ca. 2, while a structure without any vibration reduction solutions or with a TVA tuned to the TLP surge frequency (especially passive and hybrid TVA-TLPs) are at risk of tower structural failure. The obtained TVA stroke amplitudes are reduced with regard to the previously developed approaches. Moreover, these reductions are obtained due to the sole control algorithm enhancement; thus, no additional resources are necessary, while this attainment is accompanied with a reduction in the MR damper force that is necessary for the TVA operation. The protected structure’s acceleration term utilisation produce the TVA stroke amplitude reduction more efficiently than the TVA relative displacement term usage, as in the previously developed approach (the latter being ineffective for the semiactive TVA implementation) which, in turn, efficiently reduces TVA stroke RMS values and the required mean actuator power for the hybrid TVA implementation. Concerning the limited TVA stroke, the most favourable vibration control solutions are the newly introduced semiactive control case III, providing favourable cumulative primary structure deflection indexes at the lowest obtained TVA travel distance, and possibly the hybrid control case III-H, providing even more favourable primary structure deflection qualities and reduced nacelle acceleration levels thanks to the utilisation of the force actuator of the relatively low power (ca. 6 kW); however, side effect of the latter is the increased TVA stroke amplitude as for all hybrid solutions tested (comparing to semiactive solutions). The analysed passive TVA systems along with the modified ground-hook hybrid TVA solution, utilising the assumed absorber mass, can hardly be implemented in the nacelle, especially along the demanding side-side direction, without enforcing end-stop collision bumpers, which result in the efficiency deterioration. The ground-hook control, well proven for the primary structure steady-state deflection minimisation, yielded unsatisfactory results, comparing to the newly implemented solutions. The results of the current study may be used during the design of the full-scale vibration reduction system for the real-world NREL 5MW-class floating, TLP-based, wind turbine structure.

The objective of this study is to evaluate how two varying amounts of sepiolite-based powder, infused with indigo extract, affect the appearance and durability of a water-based white primer. To examine the influence of this eco-friendly pigment on the coatings' overall appearance, assessments were performed for color, gloss, and surface roughness. Additionally, the coatings were investigated through optical and electron microscopic observations, to evaluate the distribution of the pigment within the polymer matrix. The effect of the pigment on the coating's durability was assessed through accelerated tests, including exposure in a salt spray chamber and a UV-B chamber. These tests aimed to evaluate the emergence of defects and changes in the appearance of the samples over time. Furthermore, the impact of different quantities of sepiolite-based powder on the coating's ability to act as a barrier was assessed using liquid resistance tests and contact angle measurements. These evaluations aimed to understand how the coating responded to various liquids and its surface properties concerning repellency or absorption. In essence, this study underscores the considerable influence of the eco-friendly pigment, demonstrating its capacity to introduce unique color and texture variations to the paint. Moreover, the inclusion of the pigment has enhanced the coating's color stability, its ability to act as a barrier, and overall durability when exposed to harsh environments.

Nanomaterials based on metal oxides (MexOy) are employed as catalysts and/or sorbents in processes undergoing conditions in supercritical water (scH2O), the “green” reaction medium used to obtain energy relevant products. Their properties are greatly affected by the synthesis method used to produce the active MexOy. Moreover, in order to maintain their performance, it is more practical and cost-effective to use supported MexOy nanoparticles. Within this context, the present work deals with the preparation of carbon-supported ZnO and CuO composites by an innovative method based on impregnation under scH2O conditions. Metal oxides were impregnated on a carbon (C) support using a continuous flow tubular reactor. The results show that impregnation in scH2O is a promising approach for the preparation of ZnO/C and CuO/C composite materials. This one-step synthesis method, in a continuous flow, uses neither seed layer nor mineralizer, and it needs substantially lower preparation times than the conventional impregnation methods.

Deep eutectic solvents are a mixture of two or more components, that at a particular composition become liquids at room temperature. When the compounds that constitute the DES are primary metabolites, namely, amino acids, organic acids, sugars, or choline derivatives, the DES are so called natural deep eutectic solvents (NADES). NADES fully represent green chemistry principles. These solvents are highly welcome, as they are obtained from renewable resources, and gratifyingly biodegradable and biocompatible. They are an alternative to room temperature ionic liquids (RTILs). From the pharmaceutical industry point of view, they are highly desirable, but unfortunately have been rarely used despite their enormous potential. In this review, we will look at their impact on the asymmetric catalytic synthesis of key target molecules, via metal-based catalysis, biocatalysis and organocatalysis. In many cases the NADES that have been used are chiral and can even promote enantioselective reactions, this crucial and very exciting aspect will also be discussed and analysed.

In his Cynefin classification of system behaviours, Snowden (2007), posits that his Simple (Clear ) and even Complicated system categories are sufficiently understandable to be amenable to the traditional methods of system analysis and modelling. Here, relationships between entities in the system are clear and unambiguous and they behave predictably. So, we can build mathematical “models” to describe how the system is expected to function in different situations. Leaving aside his fourth category, Chaotic, as too hard for the moment, this paper focusses on the third category, Complex systems. Yaneer Bar-Yam [1998] defined "complex systems" as systems that "have multiple interacting components, whose collective behaviour cannot be simply inferred from the behaviour of components." So, the traditional system modelling approach of decomposition into components and attempting to build up a picture of system performance from individual pieces, alone, is no longer appropriate for this class. The problem is that most of the methods we currently employ, and particularly the methods that attempt to make the case that these systems are safe, (such as Fault trees, FMEA. and Root Cause Analysis), rely on this decomposition into components and attempt to make the parts more reliable individually. Even the more systemic approaches, such as Reason’s (1990) Swiss Cheese Model, and Leveson’s System Theoretic Analysis (STPA) (2004), encourage adding layers of protection, barriers, strengthened control loops and better safety critical systems, in the hope that they are making the systems safer. But without a valid model to test the effectiveness of these add-ons, we cannot be sure that they will not have an opposite effect, of making the systems even more complex, unreliable and unpredictable. For complex systems, the careful gathering and documentation of system components and their relationships is still a necessary first step, but we need an additional capacity to model these complex systems to test out and prove they work safely and successfully in the real world. (not just draw fixed component relationships as system “models” (wiring diagrams)) In the last 10 years, an original approach developed by Hollnagel, (2012), to model systems as sets of interactive, interdependent “functions”, (abstracted from and independent of component details), has now been developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, such as MBSE( Goldberg (1994)), and can pull it all together in a dynamic system model from which analysts can discern how it really works in practice, and predict the emergent behaviours characteristic of complex systems. The paper describes how this methodology developed and how it is currently used to model real situations, to analyse incidents and anticipate events.

As belonging to one of the most isolated continents on our planet, the microbial composition of different environments in Antarctica could hold a plethora of undiscovered species with potential for biotechnological applications. This manuscript delineates our discoveries after an expedition to the Bulgarian Antarctic Base "St. Kliment Ohridski" situated on Livingston Island, Antarctica. Amplicon-based metagenomics targeting the 16S rRNA genes and ITS2 region were employed to assess the metagenomes of the bacterial, fungal and archaeal communities across diverse sites within and proximal to the research station. The predominant bacterial assemblages identified included Oxyphotobacteria, Bacteroidia, Gammaprotobacteria and Alphaprotobacteria. A substantial proportion of cyanobacteria reads were attributed to a singular uncultured taxon within the family Leptolyngbyaceae. The bacterial profile of a lagoon near the base exhibited indications of penguin activity, characterized by a higher abundance of Clostridia, similar to lithotelm samples from Hannah Pt. Although most fungal reads in the samples could not be identified at the species level, noteworthy genera, namely Betamyces and Tetracladium, were identified. Archaeal abundance was negligible, with prevalent groups including Woesearchaeales, Nitrosarchaeum, Candidatus Nitrosopumilus and Marine Group II.

The loads generated inside agricultural silos under static and dynamic conditions depend on the mechanical properties of the materials stored inside them. The silo calculation methodologies are based on these mechanical properties. Although it is known that moisture content greatly influences the values reached by these mechanical properties, just few studies have been conducted to determine them. The present work determines the angle of internal friction, the apparent cohesion, the dilatancy angle and the apparent specific weight of wheat when subjected to different moisture contents. Direct shear and oedometer assay devices were used. In addition, a climatic chamber was used to moisten the wheat samples used in this work. The moisture content applied to the samples ranged from 7.5% to 15.5%. From the different assays carried out it could be observed that the values of the angle of internal friction and apparent cohesion obtained from direct shear assays, as well as those related to the apparent specific weight obtained from oedometer assays were like those found in the literature. The apparent specific weight increased as moisture content increased, reaching a peak value at a moisture content of 13.4%, followed by a drop at a moisture content of 15.5%. The values here provided can be used in silo load calculations involving numerical methods.

Floor mats are commonly used to improve the impact sound performance of existing homes, but the actual reduction does not consistently appear depending on the test-bed conditions used to determine it. Therefore, this study evaluated the effects of the environmental conditions of the test-bed on the impact sound reduction performance of different floor mats. The Korean Industrial Standard, KS F 2865, specifies the measurement method in the test room and sets the thickness range of the available target floor structure from bare slab 120 mm to 210 mm. The evaluation method is ∆?, which is the difference in standardized impact sound levels before and after the installation of the floor finishing material. In this study, a total of eight types of floor mats were tested in four different test-beds according to KS F 2865. The impact sources used were tapping, bang machines and a rubber ball to consider both light-weight and heavy-weight impact sounds. The results were derived as impact sound reduction performance for each frequency band and a single number quantity. The results showed that light impact sound had a similar minimum reduction characteristic of at least 38 dB, regardless of the floor structure on which the mat was installed. However, the heavy-weight impact sound showed different tendencies depending on the floor mat and the characteristics of the floor structure of the test-bed when a bang machine and a rubber ball were used. In particular, the reduction by the bang machine showed less than half the tendency of the reduction by the rubber ball, and the tendency of the heavy-weight impact sound to be reduced depending on the floor mat was maintained, but the reduction differed depending on the test bed. The reduction was larger in the box-type test room than in the real-life type test room, and among the box-type test rooms, the one with a thicker bare slab showed a relatively larger reduction. In addition, the reliability of the measurement results was discussed through the correlation analysis between the single number quantities depending on the thickness of the bare slab of the test-beds.

Flooding during the rainy season poses a significant threat to the city of Hargeisa, impacting the well-being of both its residents and the local ecosystems. This research focuses on urban flood control, with a specific emphasis on finding sustainable solutions for managing large stream in Hargeisa. The study identifies five key dimensions, including infrastructure, transportation, environmental soil, life, and property, as critical factors in addressing the issue. By employing a comparative method and collecting data through closed-ended questions, the research aims to analyze and weigh eleven potential solutions, seeking to identify the most effective approaches. The findings of the study indicate that constructing a dam emerges as a promising and sustainable solution, with a weightage of 70 percent. This highlights the potential of a dam in mitigating the impact of floods in the region. Additionally, considering the government's economic capacity, the implementation of check dams is identified as another viable option, with a weightage of 95 percent for reducing the flood power of the stream. These solutions offer practical and effective measures to address the recurring problem of flooding in Hargeisa. To support future decision-making and planning, the research underscores the need for establishing a comprehensive rainfall data database. This database would store relevant information on rainfall patterns, enabling better understanding and prediction of flood events. The study emphasizes the importance of collaboration between local government authorities, environmental organizations, and stakeholders to develop and implement effective flood control strategies. This research provides a systematic approach that can inform and benefit regional and global researchers, policymakers, and municipal governments in their efforts to address urban flood control challenges, not only in Hargeisa but also in similar contexts worldwide.

Microbiomes, comprised of diverse microbial species and viruses, play pivotal roles in human health, environmental processes, and biotechnological applications and interact with themselves, their environment, and hosts via metabolites and signaling molecules. Our understanding of microbiomes is still limited and hampered by their complexity. A concept improving this understanding is systems biology, which focuses on the holistic description of biological systems utilizing experimental and computational methods. An important set of such experimental methods are metaomics methods which analyze microbiomes and output lists of molecular features. These lists of data are integrated, interpreted, and compiled into computational microbiome models, to predict, optimize, and control microbiome behavior. There exists a gap in understanding between microbiologists and modelers/bioinformaticians, stemming from a lack of interdisciplinary knowledge. This knowledge gap hinders the establishment of computational models in microbiome analysis. This review aims to bridge this gap and is tailored for microbiologists, researchers new to microbiome modeling, and bioinformaticians. To achieve this goal, it provides an interdisciplinary overview of microbiome modeling, starting with fundamental knowledge of microbiomes, metagenomics methods, and modeling formalisms. Furthermore, the review explains model building, examples of microbiome model applications for prediction, optimization, and control. It concludes with guidelines, software, and repositories for modeling. Each section provides entry-level information, serving as a valuable resource for comprehending and navigating the complex landscape of microbiome research and modeling.

In this research, we present the first steps taken towards a data-driven agent-based model (ABM) specifically designed for simulating infectious disease dynamics in Greece. Amidst the ongoing COVID-19 pandemic caused by SARS-CoV-2, this research holds significant importance as it can offer valuable insights into disease transmission patterns and assist in devising effective intervention strategies. To the best of our knowledge, no similar study has been conducted in Greece. We constructed a prototype ABM that utilizes publicly accessible data to accurately represent the complex interactions and dynamics of disease spread in the Greek population. By incorporating demographic information and behavioral patterns, our model captures the specific characteristics of Greece, enabling accurate and context-specific simulations. By using our proposed ABM, we aim to assist policymakers in making informed decisions regarding disease control and prevention. Through the use of simulations, policymakers have the opportunity to explore different scenarios and predict the possible results of various intervention measures. These may include strategies like testing approaches, contact tracing, vaccination campaigns, and social distancing measures. Through these simulations, policymakers can assess the effectiveness and feasibility of these interventions, leading to the development of well-informed strategies aimed at reducing the impact of infectious diseases on the Greek population. This study is an initial exploration toward understanding disease transmission patterns and a first step towards formulating effective intervention strategies for Greece.

Tea infusions are the most consumed beverages in the world after water, their pleasant yet peculiar flavor profile drives consumer choice and acceptance and becomes a fundamental benchmark for industry. Any qualification method capable of objectifying the product's sensory features effectively supports industrial quality control laboratories guaranteeing high sample throughputs even without the human panel intervention. The current study presents an integrated analytical strategy acting as an Artificial Intelligence decision tool for black tea infusion aroma and taste blueprinting. Key markers validated by sensomics are accurately quantified in a wide dynamic range of concentrations. Thirteen key aromas are quantitatively assessed by standard addition with in-solution solid-phase microextraction sampling followed by GC-MS. On the other hand, nineteen key taste and quality markers are quantified by external standard calibration and LV-UV/DAD. The large dynamic range of concentration for sensory markers is reflected in the selection of seven high-quality teas from different geographical areas (Ceylon, Darjeeling Testa Valley and Castleton, Assam, Yunnan, Azores, and Kenya). The strategy acts as an AI smelling and taste machine predicting teas sensory features without the human panel intervention.

Recent development for synthesis of bio-based long chain aliphatic polyesters by acyclic diene metathesis (ADMET) polymerization of α,ω-dienes, derived from plant oils and bio-based chemicals, like bis(10-undecenoate) with isosorbide, using ruthenium-carbene catalysts have been reviewed. Development of subsequent (one-pot) tandem hydrogenation afforded saturated polyesters under mild conditions. The polymerizations under bulk (without solvent, 80-90 ºC) or in ionic liquids (50 ºC) under vacuum conditions enabled synthesis of high molar mass polymers (Mn &gt;30,000 g/mol). The polymerization by molybdenum-alkylidene catalyst afforded the highest molecular weight polyesters (44000‒49400 g/mol, in toluene at 25 ºC) exhibiting promising tensile properties (strength and elongation at break) beyond polyethylene, polypropylene. Depolymerizations of these polyesters including closed loop chemical recycling were also demonstrated. Catalyst developments (more active, under mild conditions) play a key role for the efficient synthesis.

With the COVID-19 pandemic behind us, the U.S. Food and Drug Administration (FDA) has approved 55 new drugs in 2023, a figure consistent with the number authorized in the last five years (53 per year on average). Thus, 2023 is the second-best FDA harvest after 2018 (59 approvals) in all the series. Monoclonal antibodies (mAbs) continue to be the class of drugs with most approvals, with an exceptional 12, a number that makes it the most outstanding year for this class. As in 2022, five proteins/enzymes have been approved in 2023. However, no antibody–drug conjugate (ADC) has been released onto the market. With respect to TIDES (peptides and oligonucleotides), 2023 has proved a spectacular year, with a total of nine approvals, corresponding to five peptides and four oligonucleotides. Natural products continue to be the best source of inspiration for drug development, with 10 new products on the market. Three drugs in this year’s harvest are pegylated, which may indicate the return of pegylation as a method to increase the half-lives of drugs, after the withdrawal of peginesatide from the market in 2013. Following the trends of recent years, two bispecific drugs have been authorized in 2023. As in preceding years, fluorine and/or N-aromatic heterocycles are present in most of the drugs. Herein, the 55 new drugs approved by the FDA in 2023 are analyzed exclusively on the basis of their chemical structure. They are classified as the following: biologics (antibodies, proteins/enzymes); TIDES (peptide and oligonucleotides); combined drugs; pegylated drugs; natural products; nitrogen aromatic heterocycles; fluorine-containing molecules; and other small molecules.

Abstract: Background: Dental fear and uncooperative behavior can hinder dental treatment quality. Pediatric Procedural Sedation and Analgesia (PPSA) is used to facilitate treatment when coping capacity is exceeded. Out-of-hospital PPSA has been associated with more adverse outcomes compared to hospital-based settings. Updated Dutch PPSA guidelines recommending two anesthesiologists and a ventilator during out-of-hospital PPSA have increased costs and raised concerns about the accessibility to specialized high quality dental care for children in the Netherlands. Aim: This study aims to investigate the impact of the updated 2017 guideline on the occurrence rate of adverse events during PPSA, as recorded in the anesthesia complication database of twelve participating Dutch dental clinics, with adjustments made for age, weight, and duration of treatment. Method: Data of 25,872 children treated at 12 dental clinics performing out-of-hospital PPSA between 1997 and 2019 were analyzed. Eligible children were aged 2-18 with ASA classification I and II. A logistic two-level mixed-effects model is used to estimate the updated guideline’s impact on adverse events. Results: In the final model we analyzed the data of 21,759 children in nine dental clinics. The OR of the occurrence rate of an adverse event adjusted for age, weight, and duration of treatment was 0.75 (95% CI 0.64 – 0.89) after the implementation of the updated guideline, compared to before the updated guideline. This outcome was significant with a P=0.001, indicating a protective effect. The average odds per clinic of having an adverse event was 0.04 with a 3.81% chance. Conclusion: Our findings demonstrate a significant reduction in adverse events after the implementation of the updated guideline and highlight the importance of adherence to evidence-based guidelines in improving patient safety and the quality of care provided during pediatric procedural sedation and analgesia in out-of-hospital dental clinics. Our study underlines the necessity of considering the complex underlying mechanisms that play a role in the development and implementation of evidence-based practice and safety initiatives on the occurrence of adverse events.

Usually, the vector control of the induction machine (IM) is done by using cascade control structures with conventional linear PI controllers, the inner loop being designed for current control, and the outer loop for rotor flux and speed control. In this paper, starting from the dq model of the IM with the rotor magnetic flux space vector aligned along the d axis, advanced control algorithms are proposed for the two control loops of the cascade structure. For the current inner loop, after the decoupling control of the two dq currents, predictive algorithms with constraints are used to control and limit the currents. Since the outer loop has a nonlinear affine multivariable plant model, a homotopy-based variant of feedback linearization is used to obtain a non-singular decoupling matrix of the feedback transformation even when the rotor flux is zero at the start-up of the motor. During the continuous variation of the homotopy parameter, the model of the plant is variable, in which case the model free algorithms are properly used to control the flux and speed of the IM. The comparative analysis obtained for the cascade structure with conventional PI controllers and advanced algorithms, respectively, shows that the last lead to improve the dynamical performance of the IM.

In this work, electrochemical deposition (galvanostatic and potentiostatic) techniques were used to obtain of new composite polymer: 3-methylpyrrole - sodium dodecyl sulfate/poly 2-methythiophene (P3MPY-SDS/P2MT) coatings on cobalt -based alloy sample for anticorrosion protection. The sodium dodecyl sulfate as a dopant ion used in electropolymerization practice can have a relevant effect at the anticorrosion protection of the composite polymer layer by blocking the entry of aggressive ions. The cobalt -based alloy substrate had an important influence on the electrochemical performance of the composite coating and this together with the presence of the polymeric layer was achieved by simultaneously formation of a complex oxides film and polymeric layers. The polymeric coatings were analyzed by cyclic voltammetry, Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) methods. The corrosion protection of P3MPY-SDS/P2MT coated cobalt based alloy has been explored by potentiostatic and potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) procedures in1 M HCl medium. The corrosion establishment of P3MPY-SDS/P2MT covered cobalt based alloy was observed to be ~10 times less than that uncoated specimen and the effectiveness of these composite layers of this coating is above than 90%. The superior efficacy is achieved by the electrochemical polymerization of P3MPY-SDS/P2MT obtained at 0.5 mA/cm2 and 1mA/cm2 current densities and at 0.9V and 1.0V potential applied and in molar ratio 5:1. Corrosion tests result indicated that P3MPY-SDS/P2MT coatings provide good corrosion protection of cobalt -based alloy in aggressive environments.

This study advances the field of solar irradiance nowcasting by introducing a discrete-level classification approach, diverging from traditional continuous measurement methods. Grounded in a need for cost-effective and modular solutions, the research employs high-resolution computer vision coupled with a deep learning framework to predict Direct Normal Irradiance (DNI). By harnessing the capabilities of a Logitech C900 1080p HD camera and an NVIDIA Jetson module, the study achieves real-time data processing, pivotal for CSP systems' operational efficiency. The core of the methodology is the ResNet-50 convolutional neural network, refined via transfer learning on a bespoke dataset, culminating in a predictive accuracy of 85.78%. This discrete classification model contrasts with conventional, costly instruments like the MS-57, offering a novel and accessible alternative for DNI estimation. Such innovation not only demonstrates high predictive accuracy but also signifies a shift towards less resource-intensive and more adaptable solar energy forecasting tools, contributing a significant leap towards optimizing renewable energy systems.

This review explores the field of retreatment strategies for the cases filled with calcium silicate-based root canal sealers. Since the introduction of calcium silicate-based materials in dentistry, calcium silicate-based root canal sealers have become popular among dentists because of their biocom- patibility, bioactivity, and sealing ability. Therefore, effective retreatment strategies are indispensable. This article aims to identify the challenges associated with the removal of calcium silicate-based sealers itself and gutta-percha with the sealers during retreatment, evaluate current techniques and materials, and provide future directions for research in this field. Regarding the strategies of removal of root canal sealers, calcium silicate-based sealers are still relatively new materials for clinicians compared with the traditional sealers such as epoxy- or eugenol-based sealers. First, no clinically established solvents have been reported. Second, calcium silicate-based sealers are currently utilized by clinicians in either cold sealer-based technique or warm vertical condensation technique. Third, the setting process of calcium silicate-based sealers generates byproducts primarily calcium hydroxide and secondarily hydroxyapatite, which could interact with dentine. Lastly, there is a lack of clinical studies evaluating the efficacy of retreatment protocols for teeth filled with calcium silicate-based sealers. Therefore, it is important to investigate chemo-mechanical properties of calcium silicate- based sealers itself and their reactions to solvents and/or mechanical instruments, and identify the interfacial properties of calcium silicate-based sealers in respect to dentine and gutta-percha. In addition, researchers in clinical field need to actively gather and report data on retreatments of teeth filled with calcium silicate-based sealers.

Radio techniques are widely used in wildlife tracking. Currently, the most common tracking methods include radio tracking (operating on VHF and UHF frequencies), satellite tracking (e.g., Argos satellite Doppler-based positioning system), and Global Navigation Satellite System (GNSS) tracking. One of the radio tracking systems is the Radio-Frequency Identification (RFID) system, characterized by small dimensions and a long operational period due to energy-efficient features. The advantages of RFID make it possible to apply this technique to track oak acorns in the process of zoochoric dispersal. In our study, we explored the potential applications of RFID systems for monitoring the dispersal of oak acorns. We developed a tracking system based on a semi-passive RFID tag, which we tested under laboratory and quasi-realistic conditions. The obtained results confirm the feasibility of using our system in radio tracking small objects such as oak acorns.

Rapid haemostasis during surgery is essential when one wants to reduce the duration of opera-tions, reduce the need for transfusions, and above all when one wants to achieve better patient management. The use of haemostatic agents, sealants and adhesives improves the haemostatic process by offering several advantages, especially in vascular surgery. These agents vary widely in their mechanism of action, composition, ease of application, adhesion to wet or dry tissue, im-munogenicity and cost. The most used are cyanoacrylate-based glues (Glubran 2) or polysaccharide hydrogel-microsphere powder (AristaTMAH). This work is based on a retrospective study carried out on a sample of patients with different vascular diseases (FAV, pseudoaneurysm and PICC application) in which two different haemostatic sealants were used. The aim was to assess the safety, the advantages and the ability of both sealants to activate the haemostatic process at the affected site, also in relation to their chemical-physical characteristics. The obtained results showed that the application of Glubran 2 and AristaTMAH as surgical wound closure systems is effective and safe as the success achieved was ≥94% on anastomoses of FAV; 100% on stabilization of Picc catheters; ≤95% on pseudoaneurysms.

The healing of osteochondral defects (OCD) resulting from injury, osteochondritis, or osteoarthritis in middle- and old-age individuals, bearing lesions in the cartilage and bone, pain, and loss of joint function, presents challenges to the clinical practitioners because of non-regenerative cartilage and the limitations of current therapies. Bioactive peptide-based osteochondral (OC) tissue regeneration is becoming more popular because it does not have the immunogenicity, misfolding, or denaturation problems associated with original proteins. Periodically, reviews are published on the regeneration of bone and cartilage; however, none of them address the simultaneous healing of these tissues in the complicated heterogeneous environment of the OC interface. As regulators of cell adhesion, proliferation, differentiation, angiogenesis, immunomodulation, and antibacterial activity, potential therapeutic strategies for OC defects utilizing bone and cartilage-specific peptides should be examined and investigated. Therefore, the main goal of this review is to study how they contribute to the healing of OC defects, either alone or in conjunction with other peptides and biomaterials.

Innovations in drug delivery systems are crucial for enhancing therapeutic efficiency. Our research presents a novel approach based on Electro-fluid dynamic atomization (EFDA) to fabricate core-shell monophasic particles (CSMp) from sodium alginate blends of varying molecular weights. This study explores the morphological characteristics of these particles in relation to material properties and process conditions, highlighting their potential in drug delivery applications. A key aspect of our work is the development of a mathematical model that simulates the release kinetics of small molecules, specifically sodium diclofenac. By assessing the diffusion properties of different molecules and gel formulations through transport and rheological models, we have created a predictive tool for evaluating the efficiency of these particles in drug delivery. Our findings underscore two critical independent parameters for optimizing drug release: the external shell thickness and the diffusivity ratios within the dual layers. This allows for precise control over the timing and intensity of the release profile. The study advances our understanding of EFDA in the fabrication of CSMp and offers promising avenues for enhancing drug delivery systems by tailoring release profiles through particle characteristic manipulation.

Background and Objectives: Rheumatic diseases often exhibit a complex pattern of comorbidities, including the increased occurrence of emotional disorders like anxiety and depression, which are closely related to the presence of chronic pain. Therefore, a multimodal approach is necessary for treatment, targeting both the physical and psychological functioning. Due to the increased burden within the healthcare context that emerged during the post-pandemic period, the need to adjust the content and length of psychological interventions became ubiquitous. In this way, the main objective of this study was to investigate the efficiency of a single-session, process-based psychological intervention for patients with rheumatic conditions and emotional comorbidities in a naturalistic, in-patient setting. Materials and Methods: After the screening, a total of 31 participants (Mage = 58.9, SD = 12.03) completed the single session intervention. The therapeutic protocol relied on a process-based cognitive-behavioural therapy framework aiming to improve cognitive, emotional and behavioural functioning. Assessments were conducted prior to the intervention, post-intervention and one month following the hospitalization. Results: Immediately after the intervention, significant reductions in dysfunctional cognitive and emotional processes, along with the improvement of behavioural strategies were observed. At the one-month telephonic evaluation, participants reported decreased pain, state anxiety and state depression levels. Conclusions: The single-session, process-based approach represents a promising intervention in healthcare contexts, targeting important psychopathological mechanisms in patients with rheumatic conditions. Future studies could clarify the extent to which these outcomes persist over time and their specific associations with anxiety and depressive symptoms, by using more controlled and rigorous trial designs.

Road pavement monitoring represents the baseline to the pavement maintenance process. To quickly fix a damaged road, relevant authorities need a high-efficiency methodology that allows them to obtain data describing the current conditions of a network of roads. In urban areas, large-scale monitoring campaigns may be more expensive and not fast enough to describe how pavement degradation has evolved over time. Furthermore, at low speeds, many technologies are inadequate for monitoring the streets. In such a context, employing black box equipped vehicles to perform a routine inspection could be an excellent starting point. However, the vibration-based methodologies used to detect road anomalies are strongly affected by the speed of these vehicles. In this study, a statistical method was to analyze the effects of speed on road pavement conditions at different severity levels through the data recorded by taxi vehicles. Likewise introduced was a process that overcomes the speed effect when considering road surface conditions. The methodology proposed has succeeded in predicting the right damage severity level based on only two recorded parameters: speed and pavement deterioration index.

COVID-19 has become a pandemic which resulted in measures being taken for health and safety of people. The spreading of the disease was particularly evident in indoor spaces, where people tend to get overcrowded. One such place is the airport where a plethora of passengers flow to common places, such as coffee shops, duty free shops as well as toilets and gates. Guiding the passengers to less overcrowded places within the airport may be a solution to less spreading. In this paper we suggest a passenger routing algorithm whereby the passengers are guided to less crowded places by using a weighting factor, which is minimised to accomplish the desired goal. We modeled a number of shops in an airport using the AnyLogic software and we tested the algorithm showing that the exposure time is less with routing and that the people get appropriately spread to the common spaces, thus, preventing overcrowding.

Genetic engineering and directed evolution are effective methods to address the low yield and poor industrialization level of microbial target products. The current research focus is on how to efficiently and rapidly screen beneficial mutants from constructed large-scale mutation libraries. Traditional screening methods such as plate screening and well plate screening are severely limited in their development and application due to their low efficiency and high costs. In the past decade, microfluidic technology has become an important high-throughput screening technology due to its fast speed, low cost, high automation, and high screening throughput, and it has developed rapidly. Droplet-based microfluidic high-throughput screening has been widely used in various fields such as strain/enzyme activity screening, pathogen detection, single-cell analysis, drug discovery, and chemical synthesis, and has been widely applied in industries such as materials, food, chemicals, textiles, and biomedicine. In particular, in the field of enzyme research, droplet-based microfluidic high-throughput screening has shown excellent performance in discovering enzymes with new functions, improved catalytic efficiency or stability, acid-base tolerance, etc. Currently, droplet-based microfluidic high-throughput screening technology has achieved high-throughput screening of enzymes such as glycosidase, lipase, peroxidase, protease, amylase, oxidase, and transaminase, as well as high-throughput detection of products such as riboflavin, coumarin, 3-dehydroquinate, lactic acid, and ethanol. This article reviews the application of droplet-based microfluidics in high-throughput screening, with a focus on high-throughput screening strategies based on UV, visible, and fluorescence spectroscopy, including labeled optical signal detection screening, as well as label-free electrochemical detection, mass spectrometry, Raman spectroscopy, nuclear magnetic resonance, etc. Furthermore, the research progress and development trends of droplet-based microfluidic technology in enzyme modification and strain screening are also introduced.

The study aims to evaluate the Quorum Sensing (QS) system inhibition against some Gram-positive and Gram-negative bacteria detected by molecular modeling of R. cathartica L. plant extract. R. cathartica L. methanol extract was evaluated in vitro. The research was carried out for the possible role and mechanism of R. cathartica L. The antibacterial activity of R. cathartica L. seed extract on some Gram-positive and Gram-negative strains was evaluated using culture-based and computational analysis. Gentamicin (CN; 30 µg/ml, Bioanalyse) was used as an antibacterial control of the extract on the production potential of QS-dependent virulence factors on Pseudomonas aeruginosa PAO1 was investigated. Phytochemical analysis resulted in the identification of 23 phenolic phytochemicals. R. cathartica L. extract was observed to have antimicrobial activity against Gram-positive and Gram-negative bacteria at different rates (11.3 mm-16 mm). The inhibitory effect of R. cathartica L. extract on P. aeruginosa PAO1 (elastase 61%, pyocyanin 18%, and biofilm 61%) was recorded moderately. Phytochemical analysis revealed that the main component of the extract is kaempferol. Therefore, the binding potential of kaempferol on QS system receptors was investigated via molecular docking. Computational analysis showed that kaempferol can inhibit the QS system by preventing competitive ligands from connecting to LasR. This study explored the activity and mechanism of action for a new green alternative against resistance. might provide a mechanism for R. cathartica L. seed extract components and thus provide a new avenue for using R. cathartica L. seed extract as a green antibacterial agent.

Process mining offers significant services in the development of digital threads and digital twin applications for healthcare. One of the sub-emerging case studies is the use of patients’ location data in process mining analyses. While the streamlining of published works is focused on introducing process discovery algorithms, there is a necessity to address challenges beyond that. Literature analysis indicates that explainability, reasoning, and characterizing the root causes of process drifts in healthcare processes is an important but overlooked challenge. In addition, incorporating domain-specific knowledge into process discovery could be a significant contribution to process mining literature. To address this, we present the DIAG approach that consists of a meta-model and an algorithm that enables diagnosing in process mining through an ontology-driven approach. With DIAG, we modeled the healthcare semantics in a process mining application and diagnosed the causes of drifts in patients’ pathways. We performed an experiment in a hospital living lab to examine the effectiveness of the DIAG approach.

Chitosan is a copolymer of β-glucosamine and N-acetylglucosamine. Recent experiments showed that the degree and pattern of acetylation along the chitosan chain modulate the biological and physicochemical properties; however, the molecular mechanism is unknown. Here we apply the de novo all-atom molecular dynamics (MD) simulations to study chitosan’s self-assembly process at different degrees of acetylation and two different acetylation patterns. The simulations revealed that the 10-mer chitosan chains with 50% acetylation in either block or alternating patterns associate to form ordered nanofibrils comprised of mainly antiparallel chains in agreement with the fiber diffraction data of deacetylated chitosan. Surprisingly, regardless of the acetylation pattern, the same intermolecular hydrogen bonds mediate the fibril sheet formation while water-mediated interactions stabilize the sheet-sheet stacking. Moreover, the acetylated units are involved in forming the strong intermolecular hydrogen bonds (NH–O6 and O6H–O7), which offers an explanation for the experimental observation that increased acetylation lowers chitosan’s solubility. Taken together, the present study provides the atomic-level understanding the role of acetylation plays in modulating chitosan’s physiochemical properties, contributing to the rational design of chitosan-based materials with the ability to tune by its degree and pattern of acetylation. Additionally, we disseminate the improved molecular mechanics parameters that can be applied in MD studies to further understand chitosan-based materials.

3D printing with earth-based mortar is still under development and faces challenges. Optimizing the mortar mixture, improving structural strength, determining the relationship between printing speed and the amount of extruded material, and ensuring long-term durability are areas that are still being refined. Additionally, regulatory and certification issues must also be considered to ensure the safety and compliance of 3D printed structures. This paper presents for discussion the records, analyses, studies, and considerations regarding the initial initiatives involving 3D printing with the extrusion of earth-based mortar developed at the Faculty of Engineering of the University of Porto - FEUP. Through this work, it is possible to strengthen and reaffirm that 3D printing with earth-based mortar has significant potential in the construction industry and that the incorporation of dispersed kraft paper fibres from the recycling of cement bags is an excellent resource to achieve good constructability in 3D printing with earth-based mortar.

Carbon offsetting is currently a major tool in managing carbon emissions and the drive to Net-Zero. This study aims to identify the offsetting potential of existing conservation schemes, and whether carbon offsetting credits could potentially finance the continued management of the conservation activities. The results from Dorset, in the UK indicate that many existing conservation schemes in woodland, heathland and grasslands can not only enhance biodiversity but also capture significant amounts of carbon. We show that the cost per additional tonne of carbon sequestered as a result of conservation activities varies considerably between different conservation projects. On average, the cost of this offsetting is £80 per tonne CO2e sequestered and ranging between £120 and £0 depending on the project and whether existing biodiversity grants would be available. However, this figure was based on adapting and refining existing conservation projects, and did not involve expensive factors such as purchase of land, which make the prices potentially unrealistic. While the costs identified are higher than many offsetting schemes at present, it could present a useful option for those wishing to localise their offsetting, and could be combined with biodiversity credits or other credit schemes to make the higher costs more attractive.

Vaccine-induced immune thrombotic thrombocytopenia (VITT) is a rare but severe adverse event that was first observed during the global vaccination campaign against SARS-CoV-2 infection, specifically in those receiving adenoviral vector-based vaccines for Coronavirus disease 2019 (COVID-19). VITT develops 4 to 42 days post-vaccination and is characterized by the development of platelet-activating anti-platelet factor 4 (PF4) antibodies, leading to thrombocytopenia and thrombosis at unusual sites. The rise in awareness and subsequent prompt recognition of VITT was paramount in reducing mortality. Moreover, as vaccination campaigns around the world continue, a better understanding of VITT not only has important clinical implications but is also crucial for future vaccine development. In this review, we summarize the clinical features, pathophysiology, and incidence rates of VITT as well as highlight other anti-PF4 antibody-mediated disorders of growing clinical significance.

This work proposes a physics-based identification technique based on genetic algorithms. The main objective is to obtain a parametric matrix A that describes the time-invariant linear model of the longitudinal dynamics of an aircraft. This is achieved by proposing a fitness function based on the properties of the transition matrix and taking advantage of some of the capabilities of the genetic algorithm, mainly those of restricting the search ranges of the unknowns. In this case, such unknowns are related to the type of aircraft and flight conditions that are considered during the identification process. The proposed identification method is validated with a reliable nonlinear model that can be found in the literature, as well as with the calculation of the trim condition and linearization generally used in aircraft dynamics. In summary, this study suggests the genetic algorithm provided with the adequate fitness function, could be an appealing alternative for aircraft model identification, even when only a limited amount of data is available. Furthermore, in some cases, linearization using genetic algorithm can be more efficient than classical methods.

Globally, the demand for plant-based alternative food is increasing rapidly as these products are getting quite popular in vegan and vegetarians. However, it is still in the early stage and faces various technological challenges, but the imitation of sensory profile is the most challenging part as the products are meant to be an alternative of meat. The development of similar product to meat requires an accurate selection of ingredients and processing. An understanding about the sensory profile can help to construct the product and technologies that are consumer centric and sustainable. In this review, we focus on the comparative differences in the sensory profile of animal meat and plant-based meat alternative specially in the color, texture and flavor, along with the method used to resemble them. The paper also explains about the sensory evaluation and how it affects the consumer preference and acceptability. Additionally, a direction to further research for developing better plant-based alternative products has also been suggested.

There is a great need to develop research-based models for supporting collaboration between educational institutions. Collaboration models are needed, for example, to assist the transition from lower educational level to higher education or from higher education to work life. In this research, collaboration was conducted through a joint upper-secondary school and university course that addressed global challenges by using a project-based learning approach. There is a shortage of research exploring students’ perceptions of collaboration. Therefore, the main purpose of this qualitative case study is to explore the relevance of the joint course for students and university students. The research was guided by the following research question: What kind of relevance did the students experience in the joint project-based learning course? The data was gathered using questionnaires, interviews, and reflective study reports. The data was analyzed via theory-based content analysis where research-oriented relevance model was used as the analysis framework. The analysis framework enabled categorizing experienced relevance on individual, vocational and societal dimensions. Altogether, the analysis produced 7 relevance categories for upper-secondary students and 9 for university students. According to the analysis, upper-secondary school students felt that the course offered the most on an individual relevance dimension whereas university students experienced the vocational relevance dimension most diverse. As the main conclusion, this research produced new insights on the experienced relevance of upper-secondary level and higher education cooperation from the students’ point of view. The acquired knowledge can be useful for everyone developing new cross-institutional cooperation models.

Weight increase after tonsillectomy has been reported in different studies and systematic reviews. However, the odds of a child being overweight or obese after tonsillectomy were no other than before surgery, according to a few studies. This systematic review aimed to analyze the impact of adenotonsillectomy (TA) on weight gain and to identify subgroups of children and adolescents at risk of obtaining weight gain. A systematic search was performed, including studies published in the last ten years. The PICO framework was used in the selection process, and evidence was as-sessed using the GRADE system. A total of 26 studies were included, and moderate-high level quality ones showed that children who underwent TA could present an increase in BMI z-score. However, this weight gain was significant in individuals younger than six years old and was considered a catch-up growth in subjects who were underweight at baseline. In contrast, in nor-mal-weight or overweight individuals, TA did not lead to overweight per se. At the same time, diet changes and overfeeding seem to not have a leading role in weight gain. In conclusion, TA may not be an independent risk factor for unfavorable weight gain in children; however, individuals who were underweight pre-operatively or younger than six years reported more weight gain after TA than expected.

Neural radiance fields (NeRF) leverage a neural representation to encode scenes, obtaining photo-realistic rendering of novel views. However, NeRF has notable limitations. A significant drawback is that it does not capture surface geometry and only renders the object surface colors. Furthermore, the training of NeRF is exceedingly time-consuming. We propose Depth-NeRF as a solution to these issues. Specifically, our approach employs a fast depth completion algorithm to denoise and complete the depth maps generated by RGB-D cameras. These improved depth maps guide the sampling points of NeRF to be distributed closer to the scene's surface, benefiting from dense depth information. Furthermore, we have optimized the network structure of NeRF and integrated depth information to constrain the optimization process, ensuring that the termination distribution of the ray is consistent with the scene’s geometry. Compared to NeRF, our method accelerates the training speed by 18% and significantly reduces the RMSE between the rendered scene depth and the ground truth depth, which indicates that our method can better capture the geometric information of the scene. With these improvements, we can train the NeRF model more efficiently and achieve more accurate rendering results.

The impact of long-term soil and crop management practices on soil biological and chemical properties in oilseed brassica-based production systems were deliberated for holistic soil health improvement in the present study. Different tillage, crop residue re-cycling and cropping systems were studied for 5-years in 0-15 and 15-30 cm soil profiles. No-till permanent beds with crop residue (PB+R) noticeably improved soil organic carbon (SOC), microbial biomass carbon (MBC), enzymes [dehydrogenase (DHA) and alkaline phosphatase (AlP)], nitrogen fractions (available, nitrate and total), and available phosphorus and potassium content in both the soil layers compared to conventional tillage without crop residues. Though, the plow soil layer (0-15 cm) showed higher concentration of soil carbon, enzymes, N fractions and available P than in the sub soil (15-30 cm). The dynamic soil biological and chemical properties were also varied with the crop stage, and recorded higher MBC at 30 days, SOC and enzymatic activities at 60 days, and N fractions and available P and K at harvest of mustard crop. Green gram-mustard rotation showed higher values of biological and chemical parameters. Thus, the legume-based mustard crop rotation following no-till permanent beds and residue re-cycling found holistic in improving soil health, and nutrient cycling.

This study explores the interplay between web-based professional development, teachers' self-efficacy, resilience, and work values in the context of the Davao Region. The investigation reveals significant findings in three key areas: web-based professional development, teachers' resilience, and teachers' work values. The survey indicates that web-based professional development significantly impacts teachers' self-efficacy, with interaction self-efficacy registering the highest mean score. Moreover, teachers' resilience is manifested across emotional, motivational, and social dimensions, with emotional resilience scoring the highest mean. Teachers' work values, encompassing physical facilities, social environment, job security, new challenges, professional growth, personal growth, and interpersonal relationships, all demonstrate high descriptive equivalents. The study establishes a significant positive correlation between web-based professional development and teachers' self-efficacy, as well as a significant relationship between teachers' resilience and their work values. Furthermore, both web-based professional development and teachers' resilience exert a significant influence on teachers' work values.The conclusions drawn from the study highlight the prominence of web-based professional development, teachers' resilience, and work values in the educational landscape of the Davao Region. The findings underscore the interconnectedness of these factors and their crucial role in shaping the teaching profession. In light of these results, recommendations are made to inform policy decisions and enhance professional development programs for teachers in the region. The study encourages a holistic understanding of the relationships between web-based professional development, self-efficacy, resilience, and work values, aiming to contribute to the continuous improvement of education quality in the Davao Region. Additionally, future research is suggested to delve deeper into specific aspects of teachers' general self-efficacy, social resilience, and interpersonal relationships for a more comprehensive understanding.

Hepatic carboxylesterase 1(CES1) metabolizes many prodrugs into active ingredients or direct-acting drugs into inactive metabolites. We aim to develop a semi-physiologically based pharmacokinetic model(Semi-PBPK model) to simultaneously predict pharmacokinetics of CES1 substrates and their active metabolites in liver cirrhosis(LC) patients. Six prodrugs(enalapril, benazepril, cilazapril, temocapril, perindopril and oseltamivir) and three direct-acting drugs (flumazenil, pethidine and remimazolam) were selected. The parameters including organ blood flows, plasma binding protein concentrations, functional liver volume, hepatic enzymatic activity, glomerular filtration rate(GFR) and gastrointestinal transit rate were introduced into the simulation. Pharmacokinetic profiles of these drugs and their active metabolites were simulated in 100 virtual subjects. The developed semi-PBPK model, following validation in healthy subjects, was extrapolated to LC patients. Most of the observations are within the 5% and 95% quantile of simulations from 100 virtual patients. The estimated AUC and Cmax are within 0.5-2-fold of observation. The sensitivity analysis showed that the decreased plasma exposure of active metabolite due to the decreased CES1 was partly attenuated by the decreased GFR. Conclusion: The developed PBPK model has successfully predicted pharmacokinetics of CES1 substrates and their metabolites in healthy subjects and LC patients, which assists in tailoring dosages of CES1 substrates in LC patients.

This study addressed the need for efficient data collection in micro-mobility using low-end hardware, focusing on developing a system capable of handling large real-time data streams. We proposed a novel data collection system that leverages incremental learning techniques, enabling AI-based services for micro-mobility passengers through smartphones. Our approach utilizes 3-axis acceleration sensors integrated into micro-mobility devices, collecting motion data in real-time. This data is processed through an incremental learning pre-processing server, employing the Broad Learning System algorithm, to ensure robust performance in noisy, real-world environments. The use of incremental learning is pivotal, allowing our system to adapt continuously to new data, enhancing the accuracy and relevance of the AI services provided to passengers. This research not only advances the technical capabilities in micro-mobility data handling but also has the potential to enhance the overall passenger experience through improved AI-based services.

Objective: To determine if higher weight-to-length z-scores after 32 weeks of gestation are associated with higher Pulmonary Scores (PS) in preterm infants requiring respiratory support using a prospective observational study. Methods: Infants born <30 weeks, with a post-menstrual age (PMA) of 30-33 weeks were enrolled. Weight, infant’s length, and head circumference were measured weekly. Data on calories/kg/d, protein g/kg/d, weight for length percentiles, z-scores, and BMI at 33 through 40 weeks PMA were collected. PS was calculated. Results: We analyzed 91 infants. The mean gestational age was 26.9 ± 1.7 weeks. There was a significant association between PS and W/L z scores(p<0.0001). For every one-unit increase in W/L z-scores, PS increased by 0.063. There was a significant association between PS and W/L percentiles (p = 0.0017) as well as BMI (p = <0.0001). For every unit increase in W/L percentiles, PS increased by 0.002, and for a unit increase in BMI, PS increased by 0.04. The association remained significant after postnatal steroids, sex, corrected, and birth gestational ages were included in the regression analysis. Nutrition did not affect anthropometric measurements. Conclusion: Our study is the first to demonstrate that higher BMI and W/L may adversely affect respiratory severity in infants.

The study examines the return performance and resilience to market volatility of the recently introduced Environment, Social/Sustainable, and Governance (ESG) weight-tilted Hang Seng Index (HSIESG) compared to its parent, the Hang Seng Index (HSI). The ESG-infused index has a higher mean return and lower return volatility than the parent index, although the differences are statistically and economically insignificant, a result consistent with the high correlation between the two index returns. Most important, the ESG weighted-tilted index is more resilient to volatility spikes than the parent index and therefore has lower downside risks. The overall results show that stocks with high ESG ratings are less susceptible to trading pressures triggered by volatility-induced turnovers. The paper contributes to the literature by providing significant incremental information on the emerging market for ESG-related equity products in Hong Kong.