COVID-19, a rapidly spreading new strain of coronavirus, has affected more than 150 countries and received worldwide attention. The lack of efficacious drugs or vaccines against SARS-CoV-2 has further worsened the situation. Thus, there is an urgent need to boost up research for the development of effective therapeutics and affordable diagnostic against COVID-19. The crystallized form of SARS-CoV-2 main protease (Mpro) was demonstrated by a Chinese researcher Liu et al. (2020) which is a novel therapeutic drug target. This study was conducted to evaluate the efficacy of medicinal plant-based bioactive compounds against COVID-19 Mpro by molecular docking study. Molecular docking investigations were performed by using Molegro Virtual Docker 7 to analyze the inhibition probability of these compounds against COVID-19. COVID-19 Mpro was docked with 80 flavonoid compounds and the binding energies were obtained from the docking of (PDB ID: 6LU7: Resolution 2.16 Å) with the native ligand. According to obtained results, hesperidin, rutin, diosmin, apiin, diacetylcurcumin, (E)-1-(2-Hydroxy-4-methoxyphenyl)-3-[3-[(E)-3-(2-hydroxy-4- methoxyphenyl)-3-oxoprop-1-enyl]phenyl]prop-2-en-1-one, and beta,beta'-(4-Methoxy-1,3- phenylene)bis(2'-hydroxy-4',6'-dimethoxyacrylophenone have been found as more effective on COVID-19 than nelfinavir. So, this study will pave a way for doing advanced experimental research to evaluate the real medicinal potential of these compounds to cure COVID-19.

Quinine and its less toxic derivatives have served humanity for decades as potent antimalarial drugs. Emergence of drug resistance has narrowed the usage of these drugs in malaria prevention and treatment. Fortunately, these drugs have roles in the treatment of other diseases as well including rheumatic disorders and viral infections. Quinine derivatives have proven antiviral effects, especially against human immunodeficiency virus (HIV), Zika virus (ZiKV), herpes simplex virus (HSV), Ebola virus and dengue virus (DENV). The prophylactic and therapeutic role of Chloroquine/hydroxychroquine has become a topic of interest after the recent outbreak of novel Corona virus-19 (nCoV-19). This virus is also named severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) and WHO has officially named this disease as Corona virus disease 2019 (COVID-19). This lethal virus has affected almost 186 countries of the world till to date just in a period of four months of its outbreak. No approved antiviral drug is existed for the treatment of COVID-19. Therefore, this review is focused on potential prophylactic and therapeutic role of chloroquine/hydroxychlroquine for COVID-19.

Objective: To investigate social, economic, and environmental contributors to quit or continue smoking and vaping during the COVID-19 pandemic. Methods: A qualitative study design was adopted to identify smokers’ beliefs in a LMIC, using a small community sample. Results: 276 participants were primarily surveyed. Motivation to continue smoking included temporary pleasurable effects, working remotely, stress or anxiety, whereas a motivator to quit smoking was the overlap with COVID-19 symptomatology. There was a rise in social awareness regarding the potential harm of smoking and vaping during the pandemic yet those participants who were younger felt they were immune from its morbid complications. Conclusions: With paradoxical associations of COVID-19 with cigarette and vape usage, it is important to pay attention to biases in data in favor of educating its users of the increased risk of severe disease.

Because of the covid-19 pandemic, world development has de-escalated, and some have come to a halt because there are many new problems that this era never faced before. Especially in Indonesia's education, every student in this millennial era who is already used to face-to-face lectures and teachers and professors are going through massive changes where every task will be done virtually. These actions are being done to prevent the spread of Covid-19. With online meetings, there will be many changes in the curriculum to find an effective way of studying, and the former curriculum will not fit because it was made for the offline lecture. Also adapting to it will take time. This article will bring up Indonesia’s education progress in this era while Covid-19 pandemic is happening and give an insight on how to anticipate this problem. Questions that arise from this topic are the effect of government effort on holding the pandemic, is it safe if school will be opened soon, and how education after this pandemic is. This research uses literature review methods where it’s done by search, gather, compile and interpret data that is being used. The data are from the latest research, namely from 2019 to 2021 published through Google Scholar, totaling 11 articles, and few online news to keep relevancy of the topic. The results of this study indicate that Covid-19 produces a change that is worse than the good. Even so, the government has allowed face-to-face and online learning according to the consent of students and parents. Thus, the community, especially students, teachers, and others, are expected to uphold education even though it is required to adapt according to existing protocols. From the research, literature review methods proved to be effective to study this topic while Covid-19 is happening to keep safety measures, but it does not give many details and specific information well. This method is recommended to researchers who don’t want to risk their life by being exposed to the pandemic.

Document classification is one of the most critical steps in the document analysis pipeline. There are two types of approaches for document classification, known as image-based and multimodal approaches. The image-based document classification approaches are solely based on the inherent visual cues of the document images. In contrast, the multimodal approach co-learns the visual and textual features, and it has proved to be more effective. Nonetheless, these approaches require a huge amount of data. This paper presents a novel approach for document classification that works with a small amount of data and outperforms other approaches. The proposed approach incorporates a hierarchical attention network(HAN) for the textual stream and the EfficientNet-B0 for the image stream. The hierarchical attention network in the textual stream uses the dynamic word embedding through fine-tuned BERT. HAN incorporates both the word level and sentence level features. While the earlier approaches rely on training on a large corpus (RVL-CDIP), we show that our approach works with a small amount of data (Tobacco-3482). To this end, we trained the neural network at Tobacco-3428 from scratch. Thereby, we outperform state-of-the-art by obtaining an accuracy of 90.3%. This results in a relative error reduction rate of 7.9%.

As a traditional Muslim country, the problem of gender discrimination in employment among women in Pakistan is more common. If we let it develop without taking measures, it will seriously restrict the speed and quality of Pakistan’s domestic economic development in the long run. In this study, the author obtained the first-hand information on the employment status of professional women in the Rahim Yar Khan region of Pakistan through questionnaire survey, supplemented by the public data of the Federal Statistical Office of Pakistan, and combined with the existing research results of the predecessors. Sex discrimination in employment of professional women in Pakistan. Through the collection of the data obtained from the questionnaire, the author found that economic factors are one of the main factors that cause local women to encounter gender discrimination in employment. Specifically, it includes the imbalance of labor supply and demand and the pursuit of maximum profits. At the same time, the traditional Muslim culture, women's own literacy and the imperfect legal system in Pakistan are also the key factors that cause female employees in the local area to encounter gender discrimination in employment. Women’s gender discrimination in employment is a universal problem. In any country in the world, gender discrimination may exist as long as women are involved in the work. Based on Pakistan's basic national conditions and relevant professional knowledge, the author provides several suggestions for eliminating the problem of gender discrimination in employment for local female employees in Pakistan. 1) The Pakistani government should further promote the domestic economic growth, increase the number of jobs, and ease the imbalance between the supply and demand of labor. At the same time, encourage self-employment and provide corresponding policy support. A variety of measures are also intended to address local gender discrimination in employment for women. 2) The government's leadership accelerates the transformation of the concept of the whole society. On the one hand, it requires the whole society to correctly understand the social status and social contribution of women, and strives to bring the concept of equality between men and women into the hearts of the people. It is intended to encourage qualified women to go out of the family to participate in social work. At the same time, correctly guide corporate values. Enterprises should not unilaterally pursue the maximization of interests, and should take the initiative to assume social responsibilities. 3) Women should also actively and consciously improve their literacy. Including not only active learning advanced cultural knowledge and professional skills. For the professional skills that have already been mastered, you must study harder and make yourself more and more progressive. At the same time, families should guarantee that girls of the appropriate age receive the education they deserve, so that they can gather their strengths in the workplace in the future.

The recently emerged severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused a major outbreak of coronavirus disease 2019 (COVID-19) and instigated a widespread fear and has threatened global health security. Although phenomenal efforts are in progress to effectively combat this COVID-19 outbreak. Still, no licensed antiviral drugs or vaccines are available, and treatment is limited to supportive care and few repurposed drugs. In this urgency situation, computational drug discovery methods provide both an alternative and a supplement to tiresome high-throughput screening, particularly in the hit-to-lead-optimization stage. Identification of small molecules that specifically target viral replication apparatus has shown the most successful strategy in antiviral drug discovery. The present study deals with the identification of potential compounds that specifically interact with SARS-CoV-2 vital proteins, including main protease (Mpro), Nsp12 RNA-dependent-RNA-polymerase (RdRp) and Nsp13 helicase. A constructive and integrated virtual screening efforts together with molecular dynamics simulations identified potential binding modes and favourable molecular interaction profile of corresponding compounds. Moreover, structurally important binding site residues in conserved motifs located inside the active site are elucidated, which displayed relative importance in ligand binding based on residual energy decomposition analysis. Although the current study lacks experimental validation, the structural information obtained from this computational study paved the way to identify and design specific targeted inhibitors to combat COVID-19 outbreak.

The SARS-CoV-2 was confirmed to cause the regional outbreak of coronavirus disease 2019 (COVID-19) in Wuhan, China. The 3C-like protease (3CL^pro), an essential enzyme for viral replication, is a valid target to compacts SARS-CoV and MERS-CoV. In this research, an integrated library consisting of 1000 compounds from Asinex Focused Covalent (AFCL) library and 16 FDA-approved protease inhibitors were screened against SARS-CoV-2 3CL^pro. Top compounds with significant docking scores and making stable interactions with catalytic dyad residues were obtained. The screening results in identification of compound 621 from AFCL library as well as Paritaprevir and Simeprevir from FDA-approved protease inhibitors as potential inhibitors of SARS-CoV-2 3CL^pro. The mechanism and dynamic stability of binding between the identified compounds and SARS-CoV-2 3CL^pro were characterized using 50 nanoseconds (ns) molecular dynamic (MD) simulation approach. The identified compounds are potential inhibitors worthy of further development as SARS-CoV-2 3CLpro inhibitors/drugs. Importantly, the identified FDA-approved therapeutics could be ready for clinical trials to treat infected patients and help to curb the COVID-19.

Rapidly changing dynamics of globalization and increasing market competition are causing the companies all around the world confronting several new challenges and opportunities. To be competitive and successful apart from relative importance of physical resources, companies must adapt modern strategies and policies regarding market flexibility and development. The purpose of this study is to empirically investigate the relationship between intellectual capital and firm value. Furthermore, the moderating role of managerial ownership has been evaluated with the help of regression analysis. The sample included the panel data taken from non-financial firms listed on Pakistan stock exchange (PSX) covering the period 2010-2015. A sample of 79 firms out of 384 firms have been selected with the help of systematic sampling technique. VAIC (Value Added Intellectual Coefficient) model has been used for the calculation of intellectual capital. Tobin's Q has been taken as a measure of firm value. Managerial ownership has been tested as moderator. Based on data analysis, it is concluded that the relationship between intellectual capital and firm value is positively significant. It is also concluded that managerial ownership moderates the relationship between intellectual capital and firm value negatively.

Malaria is a serious infection affecting millions of people in Africa. Our study investigated the personal preferences and applications of antimalarial medicines in Ghana. Based on over 1000 questionnaires distributed in Ghana from January to May 2019, we noticed that although Western medications to fight this disease are widely available, most patients in Ghana prefer treatment with locally produced herbal remedies. This preference appears to be due to a combination of traditional venues for obtaining medicines “on the street” rather than in licensed pharmacies, trust in local and “green” products, extensive advertisement of such local products, and an inherent distrust of imported and synthetic or unnatural medicines. Going local and natural is a trend also observed in other countries across the globe, and adds to the acceptance or rejection of drugs regardless of their activity or toxicity. In fact, adverse side effects associated with herbal remedies, such as general weakness and swollen, sore mouth, do not seem to deter the respondents of this study in Ghana. We propose a combination of (a) increasing public awareness of the benefits of modern medicine and (b) an improvement and control of the quality of herbal remedies to raise the standard of malaria treatment in countries such as Ghana.

For a considerable length of time synthetic composts are utilized to satisfy the dirt necessity of supplements and yield, however huge measure of these substance manures are hazardous for condition, advantageous microorganisms, creatures, and people also. In this way, natural inviting and savvy biofertilizers are utilized. Biofertilizer are the substances which contain microorganisms those microorganisms might be growths, microscopic organisms, and protozoa which have capacity to build ripeness of soil by Nitrogen obsession, Phosphorous solubilization, and Iron sequestration. These cycles convert insoluble type of supplements into solvent structure and make it accessible to the foundations of plant which effectively take them up and use them. There are assortment of the yields whose profitability can be expanded by applying biofertilizer, for example, rice, oat, and other grain crops. In this audit we experience the method of utilization of biofertilizers, and how the assistance the plants and in which they help.

The outbreak of 2019-novel coronavirus (SARS-CoV-2) that causes severe respiratory infection (COVID-19) has spread in China, and the world health organization declared it pandemic. However, no approved drug or vaccines are available, and treatment is mainly supportive and through a few repurposed drugs. In this urgency situation, development of SARS-CoV-2 based vaccines is immediately required. Immunoinformatic and molecular modelling are generally used time-efficient methods to accelerate the discovery and design of the candidate peptides for vaccine development. In recent years, the use of multiepitope vaccines is proved to be a promising immunization strategy against viruses and pathogens, which induce more comprehensive protective immunity. The current study demonstrated a comprehensive in-silico strategy to design stable multiepitope vaccine construct (MVC) from B-cell and T-cell epitopes of essential SARS-CoV-2 proteins with the help of adjuvants and linkers. The integrated molecular dynamics simulations analysis revealed the stability of MVC and its interaction with human Toll-like receptors (TLRs), which trigger an innate and adaptive immune response. Later, the in-silico cloning in a known pET28a vector system also estimated the possibility of MVC expression in E. Coli. Despite this study lacks validation of this vaccine construct in terms of its efficacy, the current integrated strategy encompasses the initial multiple epitope vaccine design concepts. After validation, this MVC can present to be a better prophylactic solution against COVID-19.

Purpose: A novel coronavirus, SARS-CoV-2 was identified as the cause of COVID-19 eventually led to the declaration of Public health emergency of international concern and a pandemic by WHO due to its exponential global spread. Present study was conducted to investigate the impact of second wave of pandemic on mental wellbeing and social behaviors among university students of Pakistan during this crucial period of COVID-19 infection. Methods: A cross-sectional analytical study was designed to evaluate the psychosocial impact during the current COVID-19 outbreak among the students of The Islamia University of Bahawalpur, Pakistan. Snowball sampling or chain referral sampling procedure was adopted to recruit the participants in the study. Verbal informed consent was taken from all participants before recruitment in the study irrespective of their gender, age and socioeconomic status. Results: Mental health of university students during COVID-19 epidemic was affected to a varying degree revealing that 26.66% were recorded to have mild, 27.15% moderate and 17.04% suffering from severe anxiety out of total 1029 students. Students who were residing in urban areas with parents and having a steady family income were negatively associated and found protective factors against anxiety. However, having a relative or an acquaintance infected with COVID-19 was an independent risk factor for experienced anxiety. Positively associated factors with the level of anxiety symptoms included economic stressors, effects on daily-life, and academic delays whereas social support was negatively correlated with anxiety in COVID-19 related stressors. Conclusion: Public health emergencies and such pandemic are exerting serious psychological impacts on university students. It is recommended that the higher authorities should plan better policies to reduce this impact for the provision of high quality and timely crisis-oriented psychological services to university students.

The present investigation highlights the synthesis of polyaniline (PANI) coated graphene oxide doped with SrTiO3 nanocube nanocomposites through facile in-situ oxidative polymerization method for the efficient removal of carcinogenic dyes, namely, the cationic dye methylene blue (MB) and the anionic dye methyl orange (MO). The synthesised nanocomposites were characterised by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The adsorption efficiencies of graphene oxide (GO), PANI homopolymer and SrTiO3 nanocubes-doped nanocomposites were assessed by monitoring the adsorption of methylene blue and methyl orange dyes from aqueous solution. The adsorption efficiency of nanocomposites doped with SrTiO3 nanocubes were found to be of higher magnitude as compared with undoped nanocomposite. Moreover, the nanocomposite with 2 wt% SrTiO3 with respect to graphene oxide demonstrated excellent adsorption behaviour with 99% and 91% removal of MB and MO respectively, in a very short duration of time.

The diamondback moth (DBM), Plutella xylostella L. (Lepidoptera: Plutellidae) is very destructive crucifers specialized pest that has resulted in significant crop losses worldwide. The pest is well attracted to glucosinolate-containing crucifers such as; Barbarea vulgaris (Brassicaceae), and generally to other plants in the genus Barbarea. B. vulgaris on their part, build up resistance against DBM and other herbivorous insects using glucosinolates; that are plant secondary metabolites used in plant defense–contained only in plants of the order Brassicales. Aside glucosinolates, plants in this genus Barbarea (Brassicaceae) also contain saponins; which is toxic to insects and act as feeding deterrents for plant herbivores, most importantly, DBM, as it was found to prevent the survival of DBM larvae on the plant. Saponins are plant secondary metabolites have been established in higher concentrations in younger in contrast to older leaves within the same plant. Previous studies have found a relationship between ontogenetical changes in the host plant’s saponin content and attraction/resistance to P. xylostella. The younger leaves recorded higher concentrations of glucosinolates and saponins, which naturally attracts the plant herbivores. DBM was reported to have evolved mechanisms to avoid the toxicity of the former. The plant-herbivore had adapted glucosinolates for host plant recognition, feeding and oviposition stimulants. Despite the adaptation for oviposition by P. xylostella adults, larvae of the insect cannot survive on the same plant. An example is in some varieties of B. vulgaris. The triterpenoid saponins which act as feeding deterrents in larvae are responsible for this direct defense mechanism against P. xylostella. In the future, trials by plant breeders could aim at transferring this insect resistance to other crops. The previous trials had limited because of lack of knowledge on the biosynthetic pathways and regulatory networks of saponins. Herein, we discussed exclusively; saponins mediated plant defense mechanisms against the DBM.

The present grievous situation of the tuberculosis disease can be improved by efficient case management and timely follow-up evaluations. With the advent of digital technology this can be achieved by quick summarization of the patient-centric data. The aim of our study was to assess the effectiveness of the ODK Scan paper-to-digital system during testing period of three months. A sequential, explanatory mixed-method research approach was employed to elucidate technology use. Training, smartphones, application and 3G enabled SIMs were provided to the four field workers. At the beginning, baseline measures of the data management aspects were recorded and compared with endline measures to see the impact of ODK Scan. Additionally, at the end, users’ feedback was collected regarding app usability, user interface design and workflow changes. 122 patients’ records were retrieved from the server and analysed for quality. It was found that ODK Scan recognized 99.2% of multiple choice bubble responses and 79.4% of numerical digit responses correctly. However, the overall quality of the digital data was decreased in comparison to manually entered data. Using ODK Scan, a significant time reduction is observed in data aggregation and data transfer activities, however, data verification and form filling activities took more time. Interviews revealed that field workers saw value in using ODK Scan, however, they were more concerned about the time consuming aspects of the use of ODK Scan. Therefore, it is concluded that minimal disturbance in the existing workflow, continuous feedback and value additions are the important considerations for the implementing organization to ensure technology adoption and workflow improvements.

Assessment of extreme events and climate change on reservoir inflow is important for water and power stressed countries. Projected climate is subject to uncertainties related to climate change scenarios and Global Circulation Models (GCMs’). Extreme climatic events will increase with the rise in temperature as mentioned in the AR5 of the IPCC. This paper discusses the consequences of climate change that include extreme events on discharge. Historical climatic and gauging data were collected from different stations within a watershed. The observed flow data was used for calibration and validation of SWAT model. Downscaling was performed on future GCMs’ temperature and precipitation data, and plausible extreme events were generated. Corrected climatic data was applied to project the influence of climate change. Results showed a large uncertainty in discharge using different GCMs’ and different emissions scenarios. The annual tendency of the GCMs’ is bi-vocal: six GCMs’ projected a rise in annual flow, while one GCM projected a decrease in flow. The change in average seasonal flow is more as compared to annual variations. Changes in winter and spring discharge are mostly positive, even with the decrease in precipitation. The changes in flows are generally negative for summer and autumn due to early snowmelt from an increase in temperature. The change in average seasonal flows under RCPs’ 4.5 and 8.5 are projected to vary from -29.1 to 130.7% and -49.4 to 171%, respectively. In the medium range (RCP 4.5) impact scenario, the uncertainty range of average runoff is relatively low. While in the high range (RCP 8.5) impact scenario, this range is significantly larger. RCP 8.5 covered a wide range of uncertainties, while RCP 4.5 covered a short range of possibilities. These outcomes suggest that it is important to consider the influence of climate change on water resources to frame appropriate guidelines for planning and management.

Water quality assessment in pastoral of Tibetan Plateau, which is water sources for about 40% of world's population and the runoff-yield area of Yellow rivers, is very important. In this paper, Xiahe county which belongs to Tibetan Plateau pastoral was investigated. Six parameters(via, chloride, COD, ammonia nitrogen, nitrate, fluoride, sulfate) were selected to assess the water quality and health degree by using fuzzy comprehensive evaluation methods. The hydrochemical type in surface water was of HCO3--Mg2+-Ca2+ type. The cations and anions in surface water were mainly from weathering and dissolution of carbonate rock. Results showed that the water quality in all 69 sampling sites was all of class Ⅰ. The integrated health degree reached more than 0.85 and the health rate were 100%. Although ammonia nitrogen was regarded as the main contamination factor, but it had a little effect on the entire body of water. Overall, the surface water qualities of most samples in Xiahe County was good condition.

New class of biologically active and non-active compounds can be synthesized via transition metal mediated Suzuki cross coupling reaction that has a great impact on the advancement of organic chemistry. These resulted products can lend a helping hand in pharmaceutical and polymer chemistry for the betterment of mankind. Suzuki-Miyaura cross coupling reaction is one of the best tools through which many natural and non-natural compounds can be synthesized.

Thermal plasma technique is becoming prominent in the treatment of variety of waste ranging from municipal solid waste, incinerator residue, hospital waste, electronics waste and industrial sludge. Application of the new treatment technology to petroleum sludge requires information on the nature and characteristics of the sludge that will be use to optimize the treatment system. In this investigation, petroleum sludge obtained from Petronas Melaka was characterized for its physical and chemical features. Proximate and ultimate analysis as well as determination of elemental composition were carried out. The sludge was found to contain high moisture (78.91%), low ash (5.06%), low volatiles (5.52%) and high fixed carbon (10.51%). The sludge has a TOC of 54.48% and HHV of 23.599MJ/kg. Despite the high moisture content, the higher heating value (HHV) is high when compared to literature values. The high value of HHV may be associated with the high fixed carbon, low ash content and high value of TOC. The apparent density of the sludge is slightly lower. Fourteen heavy metals are detected in significant quantities. Proper waste management that will safely dispose the sludge is required. The waste disposal technique should take into cognizant the possibility of leaching of heavy metals into ground water on one hand and the gasification of lighter ones on the other.

Proteins possess complex three-dimensional structures, and these structures are stable only within specific ranges of temperature which mostly correspond to the temperature ranges of the host organisms. However, few exceptional proteins, called heat-stable proteins, are stable at temperatures that are substantially higher than those tolerated by the host organisms themselves. Most of the heat-stable proteins possess heat stability to perform their functions at high temperatures, but some of them are intrinsically heat-stable due to their structure. Heat-stable proteins are usually divided into three or four groups depending upon the intricacies of their structures and thermal behaviors. Their peculiar property, i.e. heat-stability, makes them very valuable in applications such as polymerase chain reaction, industrial processes requiring high temperature, and protein engineering. Heat-stability also makes it feasible to purify such proteins, from the rest of the heat-labile proteins, using a simple heat-treatment method. Moreover, heat treatment can be used as a combined cell-lysis and protein purification step which, as compared to conventional methods, can result in a higher yield of heat-stable proteins. Furthermore, some special heat-stable proteins, i.e. intrinsically disordered proteins (which include the proteins involved in important neurodegenerative diseases), need heat-treatment step, in some cases, as the only way for their successful purification and study. Hence, this paper provides a first-ever comprehensive review of all major aspects of heat-stable proteins, i.e., their structure, evolution, classification, significance, and heat-treatment mediated purification.

Yeast extract is widely used in different food industries as a flavoring agent or vitamin supplement. In this study, a process was optimized for the production of yeast extract from Baker’s yeast (Saccharomyces cerevisiae). A glass vessel stirred fermenter was used for the cultivation of yeast biomass. The effect of various physical and chemical factors was evaluated on the production of yeast cells and optimum conditions for the production of maximum yeast biomass were determined. The optimum growth was obtained at 30ºC with pH 4.5 using molasses as a substrate supplemented with urea at 150rpm. Yeast cells were then separated by centrifugation and ruptured and autolysis was observed to be the most feasible method. Among various method employed to dry the yeast extract, spray dryer appeared as most efficient one. Yeast extract obtained after drying was subjected to different analyses and compared with commercial yeast extract. The produced yeast extract was applied in media preparation to grow different microorganisms including yeast, bacteria and fungi and considerable growth was observed. These results indicated that the developed process is a cost effective alternate approach for the production of yeast extract.

The popularity of functional gummies has increased, which is evident from the growing line of functional gummies from almost every nutraceutical companies. Sensory evaluation serves the purpose of determining which brand of functional gummy would capture the largest market share. Texture profile analysis was used to determine the mechanical properties of functional gummies. The brands of functional gummies that came under the scope of this study were denoted as Brand A, B, C, D, E, F and G. Fourier Transform Infrared Spectroscopy was utilised to detect organic material and functional groups in the functional gummies. Texture profile analysis gave valuable insights into the gummies’ mechanical properties which are cohesiveness, springiness, hardness, gumminess, and chewiness. Amongst the gummies that were studied, Brand F gummy has the highest value of cohesiveness of 0.92. Brand A gummy has a high springiness value of 1.0. Brand B gummy possesses the highest value of hardness, gumminess and chewiness of 12 532.2 g, 7617.6 N, and 6256.8 J, respectively. Qualitative sensory evaluation reveals that Brand G gummy has the best aesthetic qualities in terms of colour and appearance. Brand B gummy tastes the best while brand A gummy claims the top spot for gumminess and chewiness. Overall, the respondents in this study preferred brand A gummy over other brands.

We present an Arduino-based automatic robotic system which is used for cutting grass or lawns, mostly healthy grass which needs to cut neatly like in a public park or a private garden. The purpose of this proposed project is to design a programmable automatic pattern design grass cutting robot with solar power which no longer requires time-consuming manual grass-cutting, and that can be operated wirelessly using an Android Smartphone via Bluetooth from a safe distance which is capable of cutting the grass in indeed required shapes and patterns; the cutting blade can also be adjusted to maintain the different length of the grass. The main focus was to design a prototype that can work with a little or no Physical user interaction. The proposed work is accomplished by using an Arduino microcontroller, DC geared Motors, IR obstacle detection sensor, motor shield, relay module, DC battery, solar panel, and Bluetooth module. The grass-cutting robot system can be moved to the location in the lawn remotely where the user wants to cut the grass directly or in desired patterns. The user can press the desired pattern button from the mobile application, and the system will start cutting grass in the similar design such as a circle, spiral, rectangle, and continue pattern. Also, with the assistance of sensors positioned at the front of the vehicle, an automatic barrier detection system is introduced to enhance safety measurements to prevent any risks. IR obstacle detector sensors are used to detect obstacles, if any obstacle is found in front of the robot while traveling; it avoids the barrier by taking a right/right turn or stop automatically appropriately, thereby preventing the collision. Also, the main aim of this project is the formation of a grass cutter that relieves the user from mowing their own grasses and reduces environmental and noise pollution. The proposed system is designed as a lab-scale prototype to experimentally validate the efficiency, accuracy, and affordability of the systems. The experimental results prove that the proposed work has all in one capability (Simple and Pattern based grass cutting with mobile-application, obstacle detection), is very easy to use, and can be easily assembled in a simple hardware circuit. We note that the systems proposed can be implemented on a large scale under real conditions in the future, which will be useful in robotics applications and cutting grass in playing grounds such as cricket, football, and hockey, etc.

Conventional plant breeding methods exploit already existing genomic variation in plants to develop a variety in 8 to 10 years, which can decrease the genetic variability of the plant’s genome. The ever-increasing food demand for cereals crops cannot be met by traditional breeding methods. In order to increase food production in less time, there is a dire need to improve breeding methods. Several conventional and molecular breeding methods are being used to improve the crops traits. Molecular researchers have developed new genome editing tools like CRISPR/Cas9, CRISPR/Cpf1, prime editing, base editing, dcas9 epigenetic modification, and several other transgene-free genomes editing approaches. These genome editing tools can improve the desired traits precisely and efficiently. Moreover, a newly developed breeding method “Speed Breeding” has revolutionized the agriculture by shortening the crop cycle. It can produce 5-6 generations of cereals in a year. In this review, we have summarized all these conventional and molecular breeding approaches to improve cereal crops.

Chronic eosinophilic pneumonia (CEP) is an idiopathic disorder characterized by an abnormal and marked accumulation of eosinophils in the interstitial and alveolar spaces of the lung. Idiopathic chronic eosinophilic pneumonia is reported to comprise anywhere from 0-2.5% of cases within the registries of interstitial lung disease. Diagnosis is based on the clinical constellation of symptoms, characteristic radiographic findings and peripheral blood or BAL eosinophilia, in the absence of infection or drug-induced eosinophilia. There is no consensus on the dose and duration of treatment, but most authors recommend initial doses of prednisone at 0.5–1 mg/kg/day with gradual tapering of the dose for total treatment duration of 6–12 months.

In this article, a generalization of the geometry of Grassmannian chain complex of free abelian groups generated by the projective configuration of points and Cathelineau's infinitesimal complex of polylogarithmic groups is proposed. Firstly, homomorphisms for weight n =2 up to weight n=6 will be introduced to connect sub-complexes of Grassmannian and Cathelineau. Lately, generalization of these morphisms will be shown for weight n=N. The associated diagrams will also be proven to be commutative and bi-complex.

Dwindling Economy is otherwise known as depression economy or economy depression interchangeably and/or recess economy. It is an occurrence wherein an economy is in a state of financial turmoil, often the result of a period of negative activity based on the country’s Gross Domestic Product (GDP) rate. However, this has become a global phenomenon; a good example of a necessitating factor is the global oil crash market and pandemics virus (Covid-19) ravaging the human race. That has conjointly led to the decline in the GDP growth per capital of a country; which forces degradation in the performances of economic sectors, retrenchment of staff and wrapping-up of industries. It is a lot worse than a recession, with GDP falling significantly, and lasts for periods of time. Pen ultimately, Nigeria has been in deteriorating financial state for years; her economy in the last few years has been going through some turbulence. A country that had recorded an average GDP growth of 6.5 per cent, one of the highest in the world less than a decade ago, is now projected to grow at about 2.3 per cent in 2016. It is no longer news that Nigeria's economy is experiencing total collapse and if nothing is done to put the peg in the right spot something worse than what we are witnessing may soon be on sight. Based on some of all these issues and other, Nigeria was said to be technically recess.In this paper, efforts were made to explore the state of the Nigeria economy in the last 36 years (1981-2017) and correlate it with the recent phenomena that conjointly constitute to its dwindling economy. Our comprehensive and elusive literary survey and extemporariness suggested way forwards to rescue the raveling situation of Nigeria dwindling economics, if not providing lasting solution but temporarys’ one that could stand test of time.

Abstract: The aim of this study was to find out the incidence of anemia in pregnant women of Swat District; to analyze the iron variations and its dietary effects.Data were collected during the periods of January – September 2016. The study of samples comprised of 250 pregnant women in the different trimester. Blood sample from each woman was collected and full blood count (FBC) was conducted through Mindray BC-3000 plus hem analyzer for all pregnant individuals. Confirmed anemic cases were then examined for IDA with serum ferritin, serum iron, total iron binding capacity (TIBC) through Randox kit and serum transferrin saturation was estimated by formula (serum ferritin saturation =serum iron ×100/TIBC). The total number of participants in the first trimester were 50, among them 26 women were suffer from iron deficiency anemia (IDA) with 52% weightage of prevalence rate, (mean Hb concentration 9.602 ± 0.87 g/dl). The rates of IDA were 63.3%; ( mean Hb concentration 8.48 ± 1.24 g/dl) and 54%; ( mean Hb concentration 9.18 ± 1.28 g/dl), among 150 and 50 participants in the second and third trimester, respectively. A significant correlation was found between serum ferritin and Hb, serum ferritin against MCV and serum ferritin against MCH. The high prevalence of anemia was found 78.2% in the age group from 26-30 followed by 78.2% in the age group 36-40 years compared to those of other age groups in the second trimester. In this study the prevalence of IDA in third trimester is lower compared to first and second trimester.

Fe-(9, 19, 28, 37)wt.% Cr alloys were corroded at 700 and 800 ^oC for 70 h under 1 atm of N₂, 1 atm of N₂/3.2%H₂O-mixed gas, and 1 atm of N₂/3.1%H₂O/2.42%H₂S-mixed gas. The corrosion rate of Fe-9Cr alloy increased with the addition of H₂O, and furthermore with the addition of H₂S in N₂ gas. Fe-9Cr alloy was always nonprotective. In contrast, Fe-(19, 28, 37) wt.%Cr alloys were protective in N₂ and N₂/H₂O-mixed gas because of formation of the Cr₂O₃ layer. They were, however, nonprotective in N₂/H₂O/H₂S-mixed gas because sulfidation dominated to form the outer FeS layer and the inner Cr₂S₃ layer containing some FeCr₂S₄.

During this epidemic of COVID-19, children are in need of much concentration and profound love of the senior family members. Although the measures taken by the organizations are necessary to prevent the spread of the novel coronavirus, they may be causing widespread mental health issues, including depression and loneliness. Therefore, it is imperative that parents have to spend the lion-share of time with children while listening to them cordially. Parents can participate in sports with them to help them stay fit so that they can enjoy commemorating moments. However, in this additional time, the parents can also make them habituated to practice the rules of health, so does social distancing.

Platelet P2Y₁₂ is an important ADP receptor that is involved in agonist-induced platelet aggregation and is a valuable target for the development of anti-platelet drugs. Here we characterise the effects of thio-analogues of uridine triphosphate (UTP) on ADP-induced platelet aggregation. Using human platelet-rich plasma we demonstrate that UTP inhibits P2Y₁₂ but not P2Y₁ receptors and antagonises 10 μM ADP-induced platelet aggregation in a concentration-dependent manner with an IC₅₀ value of ~250 μM. An 8-fold higher platelet inhibitory activity was observed with a 2-thio analogue of UTP (2S-UTP), with an IC₅₀ of 30 μM. The 4-thio analogue (4S-UTP) with an IC₅₀ of 7.5 μM was 33-fold more effective. A 3-fold decrease in inhibitory activity, however, was observed by introducing an isobutyl group at the 4S- position. A complete loss of inhibition was observed with thio-modification of the γ phosphate of the sugar moiety, which yields an enzymatically stable analogue. The interaction of UTP analogues with P2Y₁₂ receptors was verified by P2Y₁₂ receptor binding and cAMP assays. These novel data demonstrate for the first time that 2- and 4-thio analogues of UTP are potent P2Y₁₂ receptor antagonists that may be useful for therapeutic intervention.

During December 2019, a novel coronavirus named as 2019-nCoV, has emerged in Wuhan, China. The human to human transmission of this virus has also been established. Untill now the virus has infected more than seven thousand people and has spread to fifteen countries. The World Health Organization (WHO) has declared 2019-nCoV as global health emergency due to its outburst well beyond China. There is need to develop some vaccines or therapeutics to control or prevent 2019-nCoV infections. The bottleneck with current conventional approaches is that these require longer time for vaccine development. However, computer assisted approaches help us to produce effective vaccine in short time compared with conventional methods. In this study, bioinformatics analysis was used to predict B cell and T cell epitopes of surface glycoprotein of 2019-nCoV that could be suitable to trigger significant immune response. The sequence of surface glycoprotein was collected from the database and analyzed to identify the immunogenic epitope. Both B cell and T cell epitopes were analyzed so the predicted epitopes can stimulate both cellular and humoral immune responses. We predicted 13 B cell and 05 T cell epitopes that later on were joined with GPGPG linker to make a single peptide. This computational approach to design a multi epitope peptide vaccine against emerging 2019-nCoV allows us to find novel immunogenic epitopes against the antigen targets of surface 2019-nCoV surface glycoprotein. This multi epitope peptide vaccine may prove effective to combat 2019-nCoV infections.

The coronavirus COVID-19 epidemic has wreaked havoc on inhabitants of earth killing thousands of humans from more than 150 countries. The epidemic has put a number of countries under complete lockdown and the deadly situation is still prevailing around the globe. Vaccines have been long known as the most effective means of preventing viral infections. However, the lack of vaccines against COVID-19 has further worsened the situation. In this time of health crisis, it is the duty of scientific research community to provide alternative, effective and affordable strategies to vaccinate human bodies against viral infections-COVID-19 based on focused experimental approaches. Growing evidence suggests that certain natural foods and lifestyle changes have potential to optimize immune functions against viral infections including improving defense function, resistance towards invading pathogens, while maintaining self-tolerance. Boosting immune system gives an edge in fending off viruses and staying healthy. This review presents the six smart steps to add to your to-do list which let the inner work of immunity take place against viral infections-COVID-19 by dissolving the powers of disease and illness. Many of these factors are associated in their functions to improve or properly maintain the immune function such as promoting anti-inflammatory functions, inhibiting pro-inflammatory mediators, modulating cell-mediated immunity, altering the antigen-presenting cellular functions as well as promoting communication between the innate and adaptive immune responses. Thus, a scientific illustration of boosting the immune system by proper sleep, moderate exercise, avoiding stress, utilizing vitamins enriched foods, intake of more water and use of fruits and vegetables will hopefully help the community to deal with the coronavirus by vaccinating the human systems naturally.

Deep eutectic solvents (DESs) are known as tunable solvents. It is possible to prepare ternary deep eutectic solvent (TDES) are used for desired purpose by selecting the suitable molar ratio and components of mixture. Therefore, four DESs and two TDESs were prepared in this work. DESs and TDESs were prepared with potassium carbonate (PC) as a hydrogen bond acceptor (HBA) and three hydrogen bond donors (HBDs) such as glycerol (GL), ethylene glycol (EG) and 2-amino-2methyl-1-3-propanediol (AMPD) known as a hindered amine (HA). Binary DESs were PC-GL with molar ratios 1:10 and 1:16 and PC-EG with the same molar ratios. TDES were prepared by adding AMPD in binary DESs such as PC-GL-AMPD 1:16:1 and PC-EG-AMPD 1:10:1. The experimental density and refractive index of all DESs and TDESs were measured at the temperature of 293.15 to 343.15 K with an interval of 5 K. The effect of temperature, molar ratio and alkyl chain length on the properties was investigated. The molar volumes and isobaric thermal expansion were calculated using experimental density data. The experimental refractive index data was used to derive the specific refraction, molar refraction, free molar volume, electronic polarization, polarizability constant and internal pressure at several temperatures.

Academic failure, low attendance, financial difficulties, and mental illness are some of the major reasons most students drop out of high schools. We investigated how high school dropout risk is affected by socioeconomic, demographic, and institutional characteristics. Therefore, research design is composed of a literature review, Questionnaire surveys by interviewing each student. Besides, the analysis and statistical modelling, the Logistic Regression method was used. The results show that academic performance, job, lack of interest and low learning ability were the significant individual characteristics that affect the high school dropout. Moreover, parental characteristics, including financial condition, lack of awareness, and education, are significant factors associated with high school dropout rates. Some other related factors, such as adaptability and influence of the peer groups, abandoning school by siblings, and extra responsibility at home and a joint family system, are also some notable factors that significantly affect the dropout rate in schools Malakand District of KP province. This research study delivered the results that contribute to the literature in education to identify different factors like student's own, parental, institutional, and household characteristics, which affect a student being a dropout from high school in Malakand district Pakistan.

A new class of nano-cube core-shell heterostructures containing Ag coating on the top of WO₃ was fabricated. Physical vapor deposition was used to produce WO₃ based nano-heterostructures. All kind of wet toxic chemical process was avoided to make the process simple and contaminant free. Sputtering of WO₃ and a subsequent thermal annealing process was done to create nano-cubes of WO₃. After that, sputtering of Ag was performed to form the Ag-WO₃ core-shell nano-heterostructures (CSNH). The CSNHs were characterized using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD) and UV-vis spectroscopy. The morphologies, elemental analysis, interfaces, crystallinity, phases, and chemical compositions were analyzed. The bottom-up growth of WO₃ nanocubes was studied using different time periods at 900°C. Ag coating was also studied before and after annealing. Finally, an optical property (band gap) was also analyzed using Tauc plot derive from absorption spectra. The tailoring the band gap of WO₃ from ~2.9eV to ~ 2.45 eV was observed while Ag-WO₃ CSNH formed.

In research applications across several areas, noise removal is indispensable for accuracy of final results. Noise is caused due to physical principals, such as background electronic noise, quantum effect, and wave rebound effect to name a few. Noise removal can help improve results in medical, astronomy, defense, and numerous other fields. Addressing this limitation would result in potentially low cost, automatic, and reliable systems. In this paper, a generalized new approach i.e. Multi-Frame Noise Removal (MFNR) is proposed for noise removal. Given any type of data, the probability density function (PDF) of the noise can be determined. Herein, we extracted the noise PDF parameters using KDE (Kernel Density Estimation). Because the data is corrupted by “deterministic” noise, hence can be cleaned. This could be used as a general purpose noise removal tool. The data point with same position in multiple frames helps us determine the noise PDF characteristics and hence making it possible to remove noise. The conventional wisdom which states that noise removal and detail preservation are contrary to each other is not true for MFNR. Experimental results validate our proposed method which showed practically complete noise reduction based on number of frames used, as compared to existing benchmark methods.

This article presents a dataset of tweets in the Urdu language. There are 1,140,824 tweets in the dataset, collected from Twitter for September and October 2020. This large-scale corpus of tweets is generated by performing pre-processing which includes removing columns containing user information, retweet’s count, followers information, duplicate tweets, removing unnecessary punctuation, links, symbols, and spaces, and finally extracting emojis if present in the tweet text. In the final dataset each tweet record contains columns for tweet id, text, and emoji extracted from the text with a sentiment score. Emojis are extracted to validate Machine Learning models used for the multilingual sentiment and behavior analysis. These are extracted using a Python script that searches for an emoji from the list of 751 most frequently used emojis. If an emoji is present in the text, a column with the emoji description and sentiment score is added.

This paper presents an overview of the smart electro-clothing systems (SeCSs) targeted at health monitoring, sports benefits, fitness tracking, and social activities. Technical features of the available SeCSs, covering both textile and electronic components, are thoroughly discussed and their applications in the industry and research purposes have been highlighted. In addition, it also presents the developments in the associated areas of wearable sensor systems and textile-based dry sensors. As it became evident during the literature research, such a review on SeCSs covering all relevant issues has not been presented before. This paper will be particularly helpful for new generation researchers investigating the design, development, function and comforts of the sensor integrated clothing materials.

The emergence of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) linked with coronavirus disease 2019 (COVID-19) poses a serious threat to public health worldwide. Firstly, the SARS-CoV-2 was reported in Wuhan, Hubei Province, China in December 2019. Initially, the major proportion of virus-infected cases (i.e. about 99%) was reported in China and now it is being reported in other counties as well. Humans begin to be infected within their communities and transmittance of the viral epidemic increased rapidly due to lack of understanding of its transmission routes and precautionary measures. The existence of SARS-CoV-2 in China threatened the population greatly due to the high incidence of fatal respiratory infections. Current investigations speculated that this virus transferred into a human from viral-infected bats. However, the process of interspecies viral transmission is an important scientific question to be addressed. Due to the continuous increase in the patients infected with COVID-19 associated pneumonia, the World Health Organization (WHO) has included this viral epidemic to the priority list of diseases. Therefore, accelerated research developments are required to control the spread of this outbreak, as it is declared as a public health emergency by WHO especially in the absence of efficacious drugs and vaccines. Our review encompasses the recent status of disease severity in China, a particular replication mechanism of SARS-CoV-2 and potential risks and precautionary measures required to avoid contact with this fatal viral infection.

Background: Since the advent of virtual reality (VR), it has been used in medical education for surgical training and anatomy teaching. Recently, other modalities of extended reality (XR) such as augmented reality (AR) and mixed reality (MR) has also made its way into medical education. Although there has been research validating XR’s use in medical education, there have been few studies on the research trends of the different XR modalities. The paper aims to compare the research trends of the XR modalities in general and in terms of the medical fields studied and outcomes measured. Methods: Web of Science was searched, and preliminary data was extracted to analyze the general trend. Inclusion and exclusion criteria were then applied, and finalized articles were analyzed and grouped based on the medical field studied and outcomes measured. Results: 31 articles on VR, eight on AR and one on MR were included in the final analysis. We found that there is increasing research in VR since 1990 and AR since 2008. The research in MR is constant. Most of the papers on VR studied endoscopic surgery and anatomy whereas AR studied mostly anatomy and endovascular procedures. Using Miller’s prism of clinical competence, the competency measured most for VR and AR is “show”. Discussion and conclusion: Advancement in computing, communication and display technologies since 1990 may contribute to the increase in research on VR whereas the ubiquity of smartphone since 2008 may explain the increase in research on AR. Although both VR and AR are used in surgical training and anatomy teaching, we found possible strengths of VR in counseling and AR in practical skills. The competency "show" was measured most as most of the papers were on surgery, and the XR simulators used can capture surgical parameters

Agriculture sector is the backbone of developing countries for their economy. Growing world’s population is putting more pressure on agriculture sector and there is a need to develop new technology to address the crises of food safety and food shortage. Today’s agriculture has been entered in a new era where nanotechnology works as a technological advancement regarding entire agriculture crops, and food sector revolution, even though, it has prodigious applications in food production, food processing, food packaging, food storage and economic growth of industries. Moreover, nanotechnology is the best solution to solve problems related to better food and agriculture. Likewise, biotechnology, nanotechnology also raised high concerns upon safety on biodiversity, health and environment. Nanotechnology is providing efficient alternatives to increase the crop production by managing the insect/pests in agriculture in an eco-friendly manner. It also promotes plant efficiency to absorb nutrients. However, the concerns are very high regarding regulation, safety and approval of nanotechnology products by risk assessment authorities. The suggested review includes stupendous applications of nanotechnology in food and agriculture sector along with its prospective merits and associated risks.

We introduce the notion of generalized contraction on dualistic partial metric spaces. A fixed point theorem for mappings satisfying above mentioned contraction is obtained. Some consequences of our result are obtained. We construct an example to demonstrate the effectiveness of our result among the corresponding results in partial metric spaces. Our results provide substantial generalizations and improvements of several well known results existing in the comparable literature. We discuss an application of our fixed point results to show the existence of solution of functional equations.

Physical Unclonable Functions (PUFs) based on the retention times of the cells of a Dynamic Random Access Memory (DRAM) can be utilised for the implementation of cost-efficient and lightweight cryptographic protocols. However, as recent work has demonstrated, the times needed in order to generate their responses may prohibit their widespread usage. In order to address this issue, the Row Hammer PUF has been proposed by Schaller et al. [1], which leverages the row hammer effect in DRAM modules to reduce the retention times of their cells and, therefore, significantly speed up the generation times for the responses of PUFs based on these retention times. In this work, we extend the work of Schaller et al. by presenting a run-time accessible implementation of this PUF and further reducing the time required for the generation of its responses. Additionally, we also provide a more thorough investigation of the effects of temperature variations on the the Row Hammer PUF and briefly discuss potential statistical relationships between the cells used to implement it. As our results prove, the Row Hammer PUF could potentially provide an adequate level of security for Commercial Off-The-Shelf (COTS) devices, if its dependency on temperature is mitigated, and, may therefore, be commercially adopted in the near future.

The long term sustainability and longevity of the business life cycle depends on correct understanding of the contextual constituents, triggers and dynamics, pre-startup planning, strategy and financial forecasting where business plans are developed to understand and forecast project viability, pitch ideas and secure funding. At the same time there is a lack of one page startup business model. Identifying this need, a ‘startup business strategy frame’ has been developed through learnings and encompassing design thinking, the business canvas and other strategy models and approaches. It provides a logical sequential flow and connects value drivers on environmental, strategic including operational and financial levels of proposed startup in a sequential format. To arrive at the frame as a logical conclusion a website www.strategizestartup.com is developed to build startup business model and plans in a time and cost effective process. The website assists the startups at each stage through a work and guidebook. The website takes the user from creative ideation by charting the context to build the strategy and measuring the financial impact. This startup strategy model will alleviate the problems for the first and second stage entrepreneurs to ideate creatively and strategizing. It also eradicates the issues related to reading and understanding long plans which could be an exhaustive and cumbersome process.

The performance of modified electrode of nanocomposite film consisting of polypyrrole-chitosan-titanium dioxide (Ppy-CS-TiO2) has been explored as non-enzymatic glucose biosensors. The synergy effect of TiO2 nanoparticles and conducting polymer on the current response of electrode resulted in higher sensitivity for nanocomposite modified electrode. The incorporation of TiO2 nanoparticles in the nanocomposite films were confirmed by XPS spectra. The FESEM and HR-TEM provided more evidences for the presence of TiO2 in Ppy-CS structure. Glucose biosensing properties were determined by amperommetry and cyclic voltammetry (CV) methods. The interfacial properties of nanocomposite electrodes were studied by electrochemical impedance spectroscopy (EIS). The developed biosensors showed a good sensitivity over the liner range of 1-14 mM with a detection limit of 614 μM for glucose. It also exhibited good selectivity and long term stability with no interference effect. The Ppy-CS-TiO2 nanocomposites film presented high electron transfer kinetics.

The comfort of human life depends on the quality, size, and reliability of the infrastructure projects. In the infrastructure systems, rapid growth is found, where the economic and sustainable impact has become a topic of significant concern for policies and government officials. To achieve con-straints of sustainable development, all the policies and actions over the infrastructure project's life cycle must be assessed. Decision-makers have adopted approaches for economic, social, and en-vironmental initiatives through Life Cycle Assessment (LCA) and Life Cycle Cost Analyses (LCCA) of infrastructure projects. The purpose of this review is to highlight the impact of per-forming LCA and LCCA in infrastructure projects. To achieve this goal, a systematic literature review methodology is adopted in which renowned databases, i.e., Web of Science, Science Direct, Emerald and Scopus were selected to extract the relevant literature. Using the PRISMA approach, 1251 publications were identified which were then filtered and 55 documents were included in the final review. In the extracted publications most, researchers were biased toward LCA and LCA individually, whereas few focused on integrated LCA and LCCA. The researchers assessed the costs and impact associated with the infrastructure project while there were less focused on the environmental cost. Besides this, techniques of economic, social, and environmental growth of infrastructure projects have been emphasized during the design phase because of substantial relations between infrastructure design and operation management. Moreover, a conceptual framework has been developed that will assist the decision-makers to consider the effects of LCA and LCCA on various aspects of the infrastructure project and how it impacts sustainability. In the last, a case study was performed to assess the developed framework with the incorporation of environmental impact cost.

Particulate matter (PM) contains heavy metals that affect various cellular functions and gene expression associated with an array of acute and chronic diseases, in humans. However, their specific effects on the stem cells remain unclear. Here, we report the effects of PM collected from Jeddah city on bone marrow mesenchymal stem cells (BM-MSCs) on proliferation, cell death, related gene expression and systems biological analysis aiming to understand the underlying mechanisms. Two different sizes (PM_2.5-₁₀) were tested in vitro at various concentrations (15 to 300 µg/ml) and durations (24 to 72 h). PMs induced cellular stress including membrane damage, shrinkage and death. Lower concentrations of PM_2.5 increased BM-MSCs proliferation, while higher concentrations decreased it. PM₁₀ decreased BM-MSCs proliferation in a concentration-dependant manner. The X-Ray Fluorescence spectrometric analysis showed that PM contains high levels of heavy metals. Ingenuity Pathway Analysis (IPA) and hierarchical clustering analyses showed that heavy metals were associated with signalling pathways involving cell stress/death, cancer and chronic diseases. qRT-PCR results showed differential regulation of the apoptosis genes (BCL2, BAX); upregulation of inflammation associated genes (TNF-a and IL-6) and downregulation of cell cycle regulation gene (P53). We conclude that PM could affect different cellular functions and predispose to debilitating diseases.

The feedback collection and analysis has remained an important subject matter since long. The traditional techniques for student feedback analysis are based on questionnaire-based data collection and analysis. However, the student expresses their feedback opinions on online social media sites, which need to be analyzed. This study aims at the development of fuzzy-based sentiment analysis system for analyzing student feedback and satisfaction by assigning proper sentiment score to opinion words and polarity shifters present in the input reviews. Our technique computes the sentiment score of student feedback reviews and then applies fuzzy-logic module to analyze and quantify student’s satisfaction at the fine-grained level. The experimental results reveal that the proposed work has outperformed the baseline studies as well as state-of-the-art machine learning classifiers.

Multi-walled carbon nanotubes (MWCNTs) and graphene oxide (GO) reinforced carbon foam (CF) composite were prepared by direct pyrolysis of MWCNTs, GO and mesophase coal tar pitch. The effect of additive amount of the mixture of MWCNTs and GO on the microstruture and properties of carbon foam was analzyed by transmission electron miscroscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Four-probe resistance meter, universal testing machine, and laser thermal conductivity tester respectively. The result shows that MWCNTs and GO had significant impact on the microstructure of carbon foam. Futhermore, the electrical, mechanical and thermal properties of carbon foam composites were significantly enhanced by increasing the additive amount. Maximum compressive strenght of 19.2 MPa and Young’s modulus of 56.8 MPa of CF composite were observed. Similarly, Highest thermal conductivity of 30.91 W/m.K and electrical conductivity of 27.2 ×103 S/m were observed at 2 wt. % of MWCNTs-GO additive loading.

Cellular response to mechanical stimuli is an integral part of cell homeostasis. The interaction of the extracellular matrix with the mechanical stress plays an important role in cytoskeleton organisation and cell alignment. Insights from the response can be utilised to develop cell culture methods that achieve predefined cell patterns, which are critical for tissue remodelling and cell therapy. We report the working principle, design, simulation and characterisation of a novel electromagnetic cell stretching platform based on the double-sided axial stretching approach. The device is capable of introducing a cyclic and static strain pattern on a cell culture. The platform was tested with fibroblasts. The experimental results are consistent with the previously reported cytoskeleton reorganisation and cell reorientation induced by strain. The orientation of the cells is highly influenced by external mechanical cues. Cells reorganise their cytoskeleton to avoid external strain and to maintain intact extracellular matrix arrangements.

Synthesis of activated carbon from waste biomass is of current interest towards sustainability. The properties of biomass derived activated carbon largely depends on the carbonization process. This study reports preparing extremel high surface area mesoporous activated carbon from hemp bast fibre using hydrothermal processing. Processing in hot water (390-500^oC), then activation using KOH and NaOH was investigated at different loading ratios. The described approach was found to enhance the mesoporosity (centered at 3.0 to 4.5 nm) of the hemp derived activated carbon (HAC) from activation (confirmed by BJH pore size distribution and TEM imaging). BET results showed that the product has an extremely high surface area (2425 m²/g) while the surface functional groups (-OH, COOH, C=C/C-C) were confirmed and quantified by XPS and FTIR results. Increasing KOH concentration was found to enhance the surface area with an optimum biochar to KOH ratio of 1:3. The crystallite domain size of HAC was determined using Raman spectroscopy of different wavelengths. The procedure described in this study is an environmentally friendly scalable route for the mass production of activated carbon using hemp fiber.

Increasing genetic diversity in crop plants has been used for chemical mutagenesis. Through the application of various mutagenic agents, over 430 new varieties have been derived as rice mutants (Oryza sativa L.) Chemical mutagens such as ethyl methane sulphonate (EMS), diepoxybutane derivative (DEB), sodium azide, and gamma ray, x-ray, and quick neutron irradiation have been commonly used to induce a large number of functional variations in rice and others crops. Among chemical mutagens, ethyl methane sulfonate (EMS) is the alkylating agent most widely used in plants because it induces nucleotide substitutions to be extremely frequent, as detected in various genomes. In this study, seeds of potential genotype of the popular variety, (Oryza sativa L. Super Basmati variety) were treated with EMS at concentrations of 0.25%, 0.50%, 0.75%, 1% and 1.5%. Various measurements on the M1 generation determined EMS sensitivity. As concentration of applied EMS increased, will decrease in germination, shoot length, root length, plant height, productive tillers, Panicle Length, Total Spikelet, sterile spikelet and fertility under field conditions were observed in M1 generation as compared to the non-treatment control. Emergence, shoot length, root length, plant height, productive tillers, Panicle Length, Total Spikelet, sterile spikelet and fertility also decreased with increases in EMS mutagenesis in an approximately linear fashion. The LD₅₀ values were observed based on growth reduction of seedlings after EMS treatment with 0.25% and 0.50% on the rice variety (Oryza sativa L. spp.).

Assessment of the trends of land cover and vegetation dynamics (VD) using remote sensing (RS) and indicators such as anthropogenic activities and the socio-demographic information is essential in order to make proper planning for sustainable management. This paper attempts to evaluate land cover change (LCC) and VD in Kebbi State, Nigeria using historical Landsat data from 1986-2016 by means of remote sensing. The Driver-Pressure-State-Impact-Response (DPSIR) framework was later employed using both primary and secondary data for a better understanding of the drivers, the state of the environmental condition, the causes as well as the impact of the change. The images were classified into five thematic land cover classes as Dense Vegetation, shrubs/built area, farmland, bare/grassland and water body by means of Maximum likelihood supervised classification technique in accordance with Anderson classification scheme level 1, with acceptable accuracy. Pre-classification and post-classification change detection (CD) methodologies were executed using Normalized difference vegetation index (NDVI) and Image differencing respectively. The study illustrates a steady decline in dense vegetation and shrubs/build areas while farmland and bare/grassland increases, however, water bodies remain unchanged. The DPSIR pin-point that the major drivers of change in the study area have been the pressing need for farming land as the population grows and socioeconomic demands including fuelwood consumption and endemic poverty. Expansion of Farming land, fuelwood consumption and the need for construction materials are identified as the main key elements exerting pressure for the change. The state of the condition indicates a steady decline in dense vegetation and shrubs areas while farmland and bare/grassland are increasing significantly. The impacts include land degradation, the decline in the provision ecosystem goods and services, biodiversity loss through loss of habitats. The study, however, noted that many international and national policies in response to land degradation are channelled toward land restoration and remediating of the environment, through afforestation programs and improving the livelihood of the rural people through providing alternative income sources since they depend heavily on land for sustenance. However, the state governments, communities and individual commonly organized annual tree planting campaign with the main purpose of environmental protection.

Introduction: COVID-19 pandemic has affected HCPs in multiple way. It has caused psychological impact in form of anxiety, depression, and insomnia. In this study, we aim to study and compare the stress level, anxiety and depression among HCPs who are posted in special COVID-19 units with the HCPs who are not posted in COVID-19 units.Methods: This cross-sectional study was conducted in June 2020, at various hospitals of Karachi, Pakistan. All health care professionals (HCPs) were invited to participate. A total of 301 HCPs completed this study, who were divided into two groups; those who are posted in COVID-19 ward (Group A) and those who are not (Group B). Psychological Impact was English version of the Depression Anxiety Stress Scale - 21 (DASS-21).Results: In Group A, 70.5% had moderate, severe, or extremely severe depression compared to 49.2% in group B. In Group A, 75.4% had moderate, severe, or extremely severe anxiety compared to 44.7% in group B. In Group A, 80.3% had moderate, severe or extremely severe stress compared to 54.2% in group B. Anxiety, depression and stress were significantly higher in HCPs who were posted in COVID-19 ward compared to those who were not posted in COVID-19 wardConclusion: There was significantly higher anxiety, stress and depression in health care professionals posted in COVID-19 ward. Both the government and health care agencies should take responsibility for protecting the psychological well-being of health care communities all over the world and ensuring a healthy work environment.

The present study explained factors influencing citizen satisfaction service in the Investment and One-Stop Service Agency of Tanah Bumbu Regency. In particular, this research analyses the level of citizen satisfaction and the extent to which Awareness, Rules, Organizational, Income, Skill-Ability, and Service Facility Factor influence Citizen Satisfaction. This study uses a mixed methodology with a sequential explanatory strategy. Using the incidental sampling with Slovin's Formula to calculate the number of samples is 93 respondents. The quantitative data were analyzed by the SmartPLS 3.0 program. The findings showed that the level of citizen satisfaction is included in the category "Satisfied". Furthermore, the variable of Citizen Satisfaction is influenced by variables of Awareness, Rules, Organizational, Income, Skill-Ability dan Service Facility Factor for 70,5%. Whereas Awareness, Rules, Organizational, and Skill-Ability Factor has a significant influence on Citizen Satisfaction. Besides, Income and Service Facility Factor do not have a significant influence on Citizen Satisfaction.

The demand of high data rate and ubiquitous coverage in heterogeneous cellular (HetNets) is increasing progressively. In order to meet this demand, sophisticated model having applied interference reduction scheme and cell association technique is needed. The small base station (sBS)are deployed inside the broadcasting area of macro base station (mBS), in heterogeneous cellular networks (HetNets). Since mBS has high transmission power therefore a large number of users get connected with mBS. This causes disproportion of load distribution across the HetNets. For load balancing users from high power mBS are migrated to low power sBS to increase network capacity and to decrease the load from mBS. This results in interference in the communication signal because of strong mBS Interference. Hence, we need interference management technique to mitigate interference and user association and to efficiently use sBSs’ resources. Inter-cell interference (ICI) limit the HetNets’ performance. Additionally, there exist deliberate jamming interference which depends on jammers transmission power and its proximity with the target, which notably degrades the network performance. In this paper, we employ reverse frequency allocation scheme (RFA) to reduce inter cell interference, deliberate jamming interference and to accomplish load balancing. The proposed setup is analyzed inquisitively and with the help of simulations. The result shows reduction in interferences as well as balance of load distribution in the network achieved by employing RFA scheme together with cell association.

Thalassemia is genetic blood disease cause by absence or decrease of one or more of the globin chain synthesis. Beta thalassemia is characterized by one or more mutations in beta globin gene. Absence or reduced amount the of beta globin chains cause ineffective erythropoiesis which leads to anemia. Beta thalassemia has been further divided into three main forms: Thalassemia minor/silent carrier, major and intermedia. More severe form is thalassemia major in which patients depend upon blood transfusion for survival and high level of iron occur as a consequence of consistent blood transfusion. Over loaded iron invokes the synthesis of reactive oxygen species that are toxic in redundancy and triggering the impairment to vascular, endocrine and hepatic system. Thalassemia can be diagnosed and detected through various laboratory tests such as blood smear, prenatal testing (genetic testing of amniotic fluid), DNA analysis (genetic testing) and complete blood count. Treatment of thalassemia intermedia is symptomatic but it can also be managed by splenectomy and folic supplementation. While thalassemia major can be treated by transplantation of bone marrow, regular transfusion of blood and iron chelation treatment, stimulation of fetal hemoglobin production, hematopoietic stem cell transplantation and gene therapy.

Selenocyanates form an interesting class of organic selenium compounds as they serve as multifunctional agents (being the precursors of seleninic acids and diselenides in synthetic chemistry and as antimicrobial and cytotoxic agent in biology) and, due to their similarity with better known thiocyanates promise high biological activity. Yet whilst selenocyanates are common in synthetic chemistry, they are rarely considered in pharmaceutical design. Arylmethyl selenocyanates (1-13) have been synthesized and an insight into their structural properties using X-ray crystallography has been obtained. The compounds subsequently have been evaluated for their potential antimicrobial, nematicidal and cytotoxic activity. ADMET properties in vitro, using mutagenicity (AMES) and permeability (PAMPA) tests, have been determined. The compounds exhibit pronounced activity against various strains of bacteria (both Gram-positive and Gram-negative) and yeasts. Among them, benzylselenocyanate (1) represents the most active anti-ESKAPE agent, with potent antibacterial activity, especially against multidrug resistant MRSA strains (HEMSA 5). Our results demonstrate that the arylmethyl selenocyantes are not only non-mutagenic but also possess moderate cytotoxic activity against cancer cells.

Unmanned aerial vehicles (UAVs)-based communication system is a promising solution to meet coverage and capacity requirements of future wireless networks. However, UAV-enabled communications is constrained with its coverage, energy consumption, and flying regulations, and the number of works focusing on the sustainability aspect of UAV-assisted networking has been limited in the literature so far. In this paper, we propose a solution to this limitation; particularly, we design a $Q$-learning-based UAV positioning scheme for sustainable wireless connectivity considering key constraints, that are, altitude regulations, non-flight zones, and transmit power. The objective is to find the optimal position of the UAV base station (BS) and minimize the energy consumption while maximizing the number of users covered. Moreover, a weighting mechanism is developed, where the energy consumption and number of users covered can be prioritized according to network/battery conditions. The proposed Q-learning-based solution is compared to the baseline k-means clustering method, where the UAV BS is positioned at the centroid location that minimizes the cumulative distance between the UAV BS and the users. The results demonstrate that the proposed solution outperforms the baseline k-means clustering-based method in terms of the number of users covered while achieving the desired minimization of the energy consumption.

Agricultural intensification has been adopted as a viable option for Poverty eradication and hunger, attainment of food security, socio-economic wellbeing as well as sustainable livelihood across the West Africa sub-humid and semi-arid zones. Thus, there is need to identify and address the challenges of sustainable livelihoods in the agriculture-intensive semi-arid and dry sub-humid zones of West Africa. This was addressed through review of relevant literature and analysis of environmental parameters from recent research by the authors to unveil the environmental uncertainties that threaten the sustainability of agriculture and human livelihoods across the ecologically fragile regions of West Africa, using pointers from Nigeria. The research identified the fundamental challenges, adaptation and mitigation approaches to environmental constraints, and requirements for reducing risk, enhance agricultural resilience as well as livelihoods in the zones. This was based on the premise that primarily, the use of adequate and accurately derived environmental information is crucial for increased agricultural productivity, sustainability of economic diversification and human livelihoods and by implication, enhanced regional and national security.

Dermal interstitial fluid (ISF) is a novel source of biomarkers that can be considered as an alternative to blood sampling for disease diagnosis and treatment. Nevertheless, in vivo extraction and analysis of ISF are challenging. On the other hand, microneedle (MN) technology can address most of the challenges associated with dermal ISF extraction and is well-suited for long-term, continuous ISF monitoring as well as in situ detection. In this review, we first briefly summarise the different dermal ISF collection methods and compare them with MN methods. Next, we elaborate on the design considerations and biocompatibility of MNs. Subsequently, the fabrication technologies of various MNs used for dermal ISF extraction, including solid MNs, hollow MNs, porous MNs and hydrogel MNs, are thoroughly explained. In addition, different sensing mechanisms of ISF detection will be discussed in detail. Subsequently, we identify the challenges and propose the possible solutions associated with ISF extraction. A detailed investigation is provided for the transport and sampling mechanism of ISF in vivo. Also, the current in vitro skin model integrated with the MN arrays will be discussed. Finally, future directions to develop a point-of-care (POC) device to sample ISF are proposed.

Rice grassy stunt virus (RGSV) a member of Tenuivirus family, is very potent and destructive which effects rice crop in many countries, particularly China. Non coding RNAs have important functions in development and epigenetic regulation of gene expression in numerous organsisms. There is three type of small non coding RNAs have been found in eukaryotes, which are small interferring RNAs (siRNAs), microRNAs (miRNAs) and piwi interacting RNAs (piRNAs). Small RNAs (sRNAs) origination is from the infecting virus which is known as virus-derived small interfering RNAs (vsiRNAs), has responsibility for RNA silencing in plants. Virus-induced gene silencing (VIGS) is mainly dependent on RNA silencing (RNAi). Interestingly, RNA silencing happens in plants during viral infections. RNAi technique showed significant results in Nephotettix cincticeps. RNAi technique demonstrated the gene silencing of planthopper Nilaparvata lugens. The proteins P5, pcf4, Dnj, psn5, and pn6 act as potential movement proteins and serve as silencing suppressors for RGSV. VsiRNAs originate from dsRNA molecules which require Dicer-like (DCL) proteins, RNA dependent RNA polymerase (RdRP) proteins, and Argonaute (AGO) proteins. RdRP uses ssRNA for perfect RNA amplification process and can also be used for DCL dependent secondary vsiRNA formation. VSRs interfere with the movement of signals during silencing mechanism. Moreover, intercellular movement of viruses is facilitated by virus-encoded movement protein. RNAi is found in many eukaryotes which are related to transcriptional or post-transcriptional regulation by gene suppression. Transcription is bidirectional in ssDNA viruses which are originated from dsRNA molecules. In this review, we highlighted the biology of Rice grassy stunt virus and its insect vector and its silencing suppressors. This work will be helpful for plant virologists to understand the whole biogenesis mechanism for rice viruses especially RGSV.

Multi-criteria decision analysis (MCDA), one of the prevalent branches of operations research, aims to design mathematical and computational tools for selecting the best alternative among several choices with respect to specific criteria. In the cloud, MCDA based online brokers uses customer specified criteria to rank different service providers. However, subjected to limited domain knowledge, the customer may exclude relevant or include irrelevant criterion, which could result in suboptimal ranking of service providers. To deal with such misspecification, this research proposes a model, which uses notion of factor analysis from the domain of unsupervised machine learning. The model is evaluated using two quality-of-service (QoS) based datasets. The first dataset i.e., feedback from customers, was compiled using leading review websites such as Cloud Hosting Reviews, Best Cloud Computing Providers, and Cloud Storage Reviews and Ratings. The second dataset i.e., feedback from servers, was generated from cloud brokerage architecture that was emulated using high performance computing (HPC) cluster at University of Luxembourg (HPC @ Uni.lu). The simulation runs in a stable cloud environment i.e. when uncertainty is low, shows that online broker (equipped with the proposed model) produces optimized ranking of service providers as compared to other brokers. This is due the fact that proposed model assigns priorities to criteria objectively (using machine learning) rather than using priorities based on subjective judgments of the customer. This research will benefit potential cloud customers that view insufficient domain knowledge as a limiting factor for acquisition of web services in the cloud.

Social media addiction has attracted the attention of researchers especially during the COVID era because negative emotions generated from the pandemic may have increased social media addiction. The present study aimed to investigate the role of negative emotions and social media addiction on health problems during and after the COVID lockdown. A survey was conducted with 2926 participants aged between 25 and 45 years. The data collection period was between 2nd September and 13th October 2020. Partial Least Square Structural Equation Modeling was conducted for data analysis by controlling the respondents' working time, leisure time, gender, education, and age. Our study showed that social media addiction and time spent on social media impact health. Interestingly, while anxiety about COVID increased social media addiction, fear about COIVD reduced social media addiction. Also, long working hours contributed most to people’s health issues, and its impact on social media addiction and hours was much higher than negative emotions, where males faced more health challenges than females. The impacts of negative emotions generated by the COVID on social media addiction and health issues should be reconsidered. Government and employers' control of people's working time stress should prioritize solving social media addiction-related issues.

Various methods of polymer surface tailoring have been studied to control the changes in wetting behavior. Polymers having precisely controlled wetting behavior in a specific environment are blessed with a wealth of opportunities and potential applications exploitable in biomaterial engineering. The controlled wetting behavior can be obtained by combining surface chemistry and morphology. Plasma assisted polymer surface modification technique have played a significant part to control surface chemistry and morphology. This review focuses on plasma polymerization and investigations regarding surface chemistry, surface wettability, coating kinetics, as well as coating stability. We begin with brief overview of plasma polymerization; these include growth mechanisms of plasma polymerization and influence of plasma parameters. Next, surface wettability and theoretical background structures and chemistry of superhydrophobic and superhydrophilic surfaces. In this review, overview of recent work on tunable wettability by tailoring surface chemistry and physical appearance (i.e. substrate texture) is also described. The formation of smart polymer coatings, which adjust their surface wettability by according to outside environment, including, pH, light, electric field and temperature. Finally, the applications of tunable wettability and pH responsiveness of polymer coatings in real life are addressed. This review should be of interest to plasma surface science communality specifically focused controlled wettability of smart polymer surfaces.

The construction industries face several challenges related to productivity. Productivity mainly depends upon labour effort and performance. The poor productivity of labour is one of the major reasons of time over-runs and increasing cost in construction projects. Our study aims to build a comprehensive assessment on the relationship between various factors that affect labour productivity in the construction of prestressed concrete Buildings in Ghana. A sample of 200 re-spondents collected from workers of Construction Company in Ghana. The questionnaire was designed which comprises two parts; the first part contains background information of the staff of construction company while second section explores the opinion of the staff regarding factors af-fecting labour productivity. The Smart-PLS was utilized to analyze and estimate the relationship among construct variables. By utilizing relative importance index and multiple linear regressions, it is identified that the management factor such as inadequate incentives; material factor such as poor quality of material; labour factors such as poor quality and training of labors; supervision factor such as incompetence of site supervisor; equipment factor such as frequent damage of equipment have a negative and significant relationship with labour productivity in the construc-tion of prestressed concrete buildings in Ghana. The findings of this study recommend that in order to improve labour productivity, the construction industries must conduct labour productivity measurements by adopting schedule for procurement of materials, safety programs, motivational system, and frequent meeting with project professionals.

Renal artery thrombosis is a sporadic serious clinical condition which potentially cause renal infarction. Diagnosis of renal infarction can be delayed or missed due to non specific clinical presentation and overlapping appearance of medical and surgical phenomena. Early diagnosis supported by biochemical and radiological findings while appropriate management potentially improve morbidity and mortality. Persistent abdominal or flank pain with raised LDH and proteinuria on background of thromboembolism risk factors supports the diagnosis. Despite the rarity of the disease rapid identification with prompt medical or endovascular intervention could prevent irreversible renal parenchymal damage.

Solvent free copolymerization of epoxides derived from fatty acid esters of waste cooking oil with phthalic anhydride using (salen)CrIII Cl as catalyst and n-Bu4NCl/DMAP as co-catalyst was carried out for the first time under microwave irradiation, where reaction time was reduced from number of hours to minutes. The polyesters were obtained with molecular weight (Mw = 3084-6740 g/mol) and dispersity values (D = 1.18-1.92), when (salen)CrIII Cl/n-Bu4NCl was used as catalysts. While in case of DMAP as a co-catalyst, polyesters with improved molecular weight (Mw = 5537-6925 g/mol) and narrow dispersity values (D = 1.07-1.28) were obtained even at reduced concentrations of (salen)CrIII Cl and DMAP. The obtained products were characterized and evaluated by attenuated total reflection-fourier transform infrared spectroscopy (ATR-FTIR), proton nuclear magnetic resonance (1H-NMR) spectroscopy, gel permeation chromatography (GPC) and thermogravimetric analysis (TGA) Techniques.

This paper performs non-parametric Mann Kendall (MK) trend analysis of historical hydroclimatic data (1961-2016), an ensemble climate model validation and a computation of 16 Expert Team on Climate Change Detection and Indices (ETCCDI) temperature and rainfall extremes indices. The climate indices are evaluated using MK test and annual trend analysis for two Representative Concentration Pathways (RCP4.5 & RCP8.5) future scenarios from 2020 to 2045 over Mono River Basin (MRB) in Togo. The annual and seasonal trend analyses are assessed on historical potential evapotranspiration, mean temperature, rainfall and discharge data. Results show positive and negative trends of hydroclimatic data over MRB from1961 to 2016. Mean temperatures increase significantly in most of the stations while a negative non-significant trend is noticed for rainfall. Meanwhile, the discharge presents a significant seasonal and annual trend for three gauge stations (Corrokope, Nangbéto and Athiémé). Validation of the ensemble climate models reveals that the model under-estimates observations at Sokode, Atkakpamé and Tabligbo stations, however linear regression and spatial correlation coefficients are higher than 0.6. Moreover, the percentage of bias between climate model and observations are less than 15% at most of the stations. Finally, the computation of extreme climatic indices under RCP4.5 and RCP8.5 scenarios shows a significant annual trend of some extreme climatic indices of rainfall and temperature at selected stations between 2020 and 2045 in the MRB. Therefore, relevant governmental politics are needed to elaborate strategies and measures to cope with projected climate changes impacts in the country.

Legionella pneumophila RpoS (LpRpoS) is an alternative sigma factor of RNA polymerase (RNAP) essential for virulence and stress resistance. To investigate the mechanism of RpoS in the intracellular pathogen L. pneumophila, we determined the high-resolution crystal structure of the LpRpoS (residues 95-194) containing a partial region 1.2 and region 2. The structure of LpRpoS (residues 95-194) reveals that the conserved residues are critical for promoter melting, DNA and core RNAP binding. The differences in regulatory factor binding site between Escherichia coli RpoS and LpRpoS suggest that LpRpoS may employ a distinct mechanism to recruit alternative regulatory factors controlling transcription initiation.

Emerging and reemerging pathogens is a global challenge for public health. Recently, a novel coronavirus disease emerged in Wuhan, Hubei province of China, in December 2019. It is named COVID-19 by World Health Organization (WHO). It is known to be caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) that affects the lower respiratory tract and manifests as pneumonia in humans. Coronaviruses (CoVs) are structurally more complicated as compared to other RNA viruses. This viral epidemic has led to the deaths of many, including the elderly or those with chronic disease or compromised immunity. Viruses cause infection and diseases in humans of varying degrees, upper respiratory tract infections (URTIs) cause common cold while lower respiratory tract infections induce pneumonia, bronchitis, and even severe acute respiratory syndrome (SARS). The costs of COVID-19 are not limited. It equally affects all the medical, sociological, psychological, and economic aspects globally. This is regarded as the third deadly outbreak in the last two decades after Severe Acute Respiratory Syndrome SARS (2002–2003) and Middle East Respiratory Syndrome MERS (2012). Based on the sequence homology of SARS-CoV-2, different animal sources including bats, snakes, and pangolins have been reported as potential carriers of this viral strain. Real-time RT-PCR represents the primary method for the diagnosis of new emerging viral strain SARS-CoV-2. The transmission dynamics suggest that SARS-CoV-2 is transmitted from person-to-person through direct contact or coughing, sneezing, and by respiratory droplets. Several anti-viral treatments including lopinavir/ritonavir, remdesivir, chloroquine phosphate, and abidor are also suggested with different recommendations and prescriptions. Protective and preventive strategies as suggested by various health organization i.e. WHO and US Center for Disease Control and Prevention (CDC) must be adopted by everyone. This review covers the important aspects of novel COVID-19 including characteristics, virology, symptoms, diagnostics, clinical aspects, transmission dynamics, and protective measures of COVID-19.

Emotion detection from the text is an important and challenging problem in text analytics. The opinion-mining experts are focusing on the development of emotion detection applications as they have received considerable attention of online community including users and business organization for collecting and interpreting public emotions. However, most of the existing works on emotion detection used less efficient machine learning classifiers with limited datasets, resulting in performance degradation. To overcome this issue, this work aims at the evaluation of the performance of different machine learning classifiers on a benchmark emotion dataset. The experimental results show the performance of different machine learning classifiers in terms of different evaluation metrics like precision, recall ad f-measure. Finally, a classifier with the best performance is recommended for the emotion classification.

Guava is a vital fruit worldwide, especially in Pakistan, and due to its nutritional value famous in each age group. Due to a very short shelf life, the marketing and export of this fruit faced severe constraints. Therefore, in the current study, edible coating of chitosan (0, 0.5, 1.0, 1.5, and 2.0%) was evaluated on postharvest shelf life when guava fruits were stored (room temperature and 4 °C temperatures) for 12 days. The chitosan treated coating fruits have shown reduced total sugars and malondialdehyde levels compared to untreated control samples. However, a significant difference (p ≤ 0.05) in total sugar and malondialdehyde levels exists between samples stored in m compared to refrigerated temperature (4 °C). The chitosan-coated samples have shown a greater amount of vitamin C, quercetin, rutin, and total phenolic contents than control samples. However, these nutritional parameters' levels were significantly different (p ≤ 0.05) in samples stored at room than samples stored at refrigerated temperature. However, the levels of crude fiber, potassium, and sodium were found statistically nonsignificant (p ≥0.05) in control versus chitosan treated coating treatments. The findings have documented that the coatings of 1.5 and 2.0% were most effective for extension in shelf life and maintaining the nutritional attributes of guava fruit.

Rare earths are classified as most important and critical material for US economy and defense by Congress and a mandate has been set to increase their in-house production, domestic resource utilization and decrease reliance on foreign resources and reserves. They are widely available in earth crust as ore (bastnaesite (La, Ce)FCO₃, monazite, (Ce, La, Y, Th)PO₄, and xenotime, YPO₄), but their so-called economic reserves are sparsely located geographically. They may be produced by various means such as beneficiation (physical, chemical, mechanical, or electrical), reduction (direct or indirect), electrolysis (of aqueous or molten / fused single or mixed salt systems) at high temperature or hydrometallurgy. Out of these, direct reduction also known as metallothermic reduction (La and Ca reduction) is mostly utilized. Its variant, high temperature electrowinning of fused salts is also practiced widely. These processes are material and application specific. In this study, author will employ thermodynamics (Ellingham diagrams, free energy of formation, reduction potential, Nernst equation, Pourbaix (E_h-pH) diagrams, E-pO^-2 diagrams), kinetics and energetic of a chemical reaction (chemical metallurgy) to reduce rare earth oxide / salt to rare earth metals (REO/RES – REM). It is shown that materials and energy requirement vary greatly depending on type of mineral ore, production facility, and beneficiation / mineral processing method selected. Aim is to reduce dependence on coal deposits. It is anticipated this route will be able to produce rare earths with > 35% yield and > 98% purity which be described in subsequent studies and patents.

Alcoholism is a condition associated with psychiatric and psychiatric problems, where the respiratory system is damaged through the mucociliary ladder mechanism and alveolar macrophage dysfunction. In the time COVID-19 has been observed a dramatic increase in alcohol consumption mediated by levels of anxiety and situations of confinement. In this work we analyze the relationship between alcoholism and SARS, especially with SARS-CoV-2, explained by a degradation of the host defenses of the respiratory epithelium by changing the barrier function, the discharge of cytokines and the functions of the cilia. All of them involved in the defense mechanism. of the lungs. This leads to a worse prognosis for patients precisely because of alcohol consumption. Based on this approach, alcoholism will exacerbate the consequences of COVID-19.

The purpose of this article is to draw attention to the challenges faced by business organizations implementing sustainable solutions in the United Arab Emirates (UAE) and the wider Gulf Coast Countries (GCC) region. To this end, our study examines an academic theory supporting the implementation of responsible solutions to the market. Ultimately, the authors hope to inspire the reader to consider what he or she can do to ameliorate the existing challenges encountered by sustainable businesses. The analysis presented in this article implies that in recent markets, the implementation of the sustainability theory is essential for further development. The research project contributes to the increase of knowledge about corporate and organizational challenges related to running a responsible business, as well as challenges related to the application of environmental, social and economic aspects of sustainable business practices. The research is currently limited to conceptual analysis, literature review and a survey conducted during the Sustainability Week 2019 in Abu Dhabi, United Arab Emirates. Nevertheless, this is the first stage of the research project conducted by the research team in cooperation with enterprises that implement responsible solutions in many global markets, and in UAE market. The scope of the first stage of the study was limited to the analysis of data clarifying the concept of the model specified in the research. To prove the validity of the model it will be implemented and tested in cooperation with organizations participating in the research.

CASBEE-City tool determines the city’s Built Environment Efficiency (BEE) by calculating the improvement of Quality of Life (Q) over human activities’ Environmental Load (L) within the city’s hypothetical boundary. A total of 58 variables (57 Q indicators and one variable for L) are used in the worldwide version of CASBEE-City which were grounded using ISO 37120:2014 Sustainable Development of Communities and 17 Sustainable Development Goals (SDGs) by the United Nations (UN). This paper examines the application of CASBEE-City for Malaysian cities using the case of Johor Bahru City and identifies assessment indicators which are customised based on the data availability, reliability and suitability through focus group discussions (FGDs) which involved 36 respondents (researchers, urban planners and stakeholders). This paper reveals Johor Bahru with moderate score B+ in 2010 and 2025. Consensus were also achieved from the 36 FGD respondents for the practicability and future potential of CASBEE-City and BEE framework in Johor Bahru.

The COVID-19 is a highly contagious viral infection which played havoc on everyone's life in many different ways. According to the world health organization and scientists, more testing potentially helps governments and disease control organizations in containing the spread of the virus. The use of chest radiographs is one of the early screening tests to determine the onset of disease, as the infection affects the lungs severely. This study will investigate and automate the process of testing by using state-of-the-art CNN classifiers to detect the COVID19 infection. However, the viral could of many different types; therefore, we only regard for COVID19 while the other viral infection types are treated as non-COVID19 in the radiographs of various viral infections. The classification task is challenging due to the limited number of scans available for COVID19 and the minute variations in the viral infections. We aim to employ current state-of-the-art CNN architectures, compare their results, and determine whether deep learning algorithms can handle the crisis appropriately. All trained models are available at https://github.com/saeed-anwar/COVID19-Baselines

The excess use of unsafe pesticides and mineral fertilizers in agriculture has led to serious health problems and environmental pollution. Nanotechnology has been solving these problems by providing nanoparticles (NPs) with excellent performance. By green synthesis of nanoparticles from plants, animals, and microbes, the use of hazardous and toxic chemicals has become limited. Nanoparticles have excellent performance in many fields such as electronics, cosmetics, automobiles, catalysis, biosensors, bioengineering, etc. NPs also showed excellent performance in agriculture by improving crop production and food quality. Various nano-based agroparticles that have conducted many smart and efficient agricultural systems involving nanopesticides, nanofertilizers, nanoherbicides etc. Apart from enhancing the food production, these materials operate some other functions like as identifying disease in plants, control release of nutrients, delivery of nutrients at target sites, etc. various nanofertilizers such as Fe, Mn, N, K, Mo, P, CNTs and P showed excellent targeted delivery performance. Nanopesticides and many nanoformulations have showed excellent pest protection performance. Here we reviewed the sources of nanomaterials and their excellent performance in agriculture.

Increased nutrient withdrawal by rapidly expanding intensive cropping systems, in combination with imbalanced fertilization, is leading to potassium (K) depletion from agricultural soils in Asia. There is an urgent need to better understand the soil K-supplying capacity and K-use efficiency of crops to address this issue. Maize is increasingly being grown in rice-based systems in South Asia, particularly in Bangladesh and North East India. The high nutrient extraction, especially K, however, causes concerns for the sustainability of maize production systems in the region. The present study was designed to estimate, through a plant-based method, the magnitude, and variation in K-supplying capacity of a range of soils from the maize-growing areas and the K-use efficiency of maize in Bangladesh. Eighteen diverse soils were collected from several upazillas (or sub-districts) under 11 agro-ecological zones to examine their K-supplying capacity from the soil reserves and from K fertilization (@ 100 mg K kg-1 soil) for successive seven maize crops grown up to V10-V12 in pots inside a net house. A validation field experiment was conducted with five levels of K (0, 40, 80, 120 and 160 kg ha-1) and two fertilizer recommendations based on “Nutrient Expert for Maize-NEM” and “Maize Crop Manager-MCM” decision support tools (DSSs) in 12 farmers’ fields in Rangpur, Rajshahi and Comilla districts in Bangladesh. Grain yield and yield attributes of maize responded significantly (P < 0.001) to K fertilizer, with grain yield increase from 18 to 79% over control in all locations. Total K uptake by plants not receiving K fertilizer, considered as potential K-supplying capacity of the soil in the pot experiment, followed the order: Modhukhali >Mithapukur >Rangpur Sadar >Dinajpur Sadar >Jhinaidah Sadar >Gangachara >Binerpota >Tarash >Gopalpur >Daudkandi >Paba >Modhupur >Nawabganj Sadar >Shibganj >Birganj >Godagari >Barura >Durgapur. Likewise in the validation field experiment, the K-supplying capacity of soils was 83.5, 60.5 and 57.2 kg ha-1 in Rangpur, Rajshahi, and Comilla, respectively. Further, the order of K-supplying capacity for three sites was similar to the results from pot study confirming the applicability of results to other soils and maize-growing areas in Bangladesh and similar soils and areas across South Asia. Based on the results from pot and field experiments, we conclude that the site-specific K management using the fertilizer DSSs can be the better and more efficient K management strategy for maize.

Hearing impairment is an immensely diagnosed genetic cause, 5% of the total world population effects with different kind of congenital hearing loss (HL). In third-world countries or countries where consanguineous marriages are more common the frequency rate of genetic disorders are at its zenith. Approximately, the incidence of hearing afflictions is ostensibly 7-8:1000 individuals whereas it is estimated that about 466 million peoples suffer with significant HL, and of theses deaf cases 34 million are children’s up to March, 2020. Several genes and colossal numbers of pathogenic variants cause hearing impairment, which aided in next-generation with recessive, dominant or X-linked inheritance traits. This review highlights on syndromic and non-syndromic HL (SHL and NSHL), and categorized as conductive, sensorineural and mixed HL, which having autosomal dominant and recessive, and X-linked or mitochondrial mode of inheritance. Many hundred genes involved in HL are reported, and their mutation spectrum becomes very wide. Mapping of pathogenic genes in consanguinity family is facilitated to understand the disease history. Review presents the bases of HL and also focused on various genetic factors that cause deafness like the basics of genetic inheritance, and classic and well-characterized inherited factors of it. It also overviews the application of linkage analysis, SNPs genotyping and whole exome sequencing methods, in mapping and identification of new locus, causative genes and their variants in families inherited with HL. Conclusively, this review supports researchers in understanding the location of chromosome, the causative genes and specific locus which causing deafness in humans.

Aim of this study is to gather information regarding the sustainability development goals from the public as well as the organizations of Pakistan. A sample of 500 respondents each from five main cities including employs and general public is selected for their opinion regarding sustainability development goal. The level of awareness as well as level of commitment towards the fulfilment of Sustainable Development Goals varies across the cities of Pakistan due to difference in literacy level. The commitment to achieve Sustainable Development Goals of the organizations across the selected cities varies according to the nature of the business, volume and the membership with the United Nations. This study provides the policy makers with the ground level data regarding the awareness and commitment of Pakistan based organizations and public towards SDGs fulfilment. A glance towards the attitudes of the people towards the subject matter could also be seen through this study. This a comprehensive study conducted at federal and provincial level of Pakistan which has yielded ground realities towards the implementation of SDGs. The results could be used for policy making and planning at national level and also serve as bench mark for other countries.

Multi-floor environments are usually ignored while designing an autonomous robot for indoor cleaning applications. However, for efficient operation in such environments, the ability of a robotic platform to traverse staircases is crucial. Staircase detection and localization is highly important for planning the traversal on staircases. This paper describes a deep learning approach using Convolutional Neural Networks (CNNs) based Robot Operation System (ROS) to staircase detection and localization. We use an object detection network to detect staircases in images. We also localize these staircases using a contour detection algorithm to detect the target point, a point close to the center of the first step, and the angle of approach to the target point. Experiments are performed with data obtained from images captured on different types of staircases at different view points/angles. Results show that the approach is very accurate in identifying the presence of the staircase in the working environment and is also able to locate the target point with good accuracy.

Inverse Sumudu transform multiple shifting properties are used to design methodology for solving ordinary differential equations. Then algorithm applied to solve Whittaker and Zettl equations to get their new exact solutions and profiles which shown through Maple complex graphicals. Table of inverse Sumudu transforms for elementary functions given for supporting the differential equations solving using inverse Sumudu transform.

The natural and man-made landscape settings in the Khyber Pakhtunkhwa (KPK) province of Northern Pakistan have significantly changed in the last decade due to increasing demands of urbanized populace, migration, two major natural disasters, and climate change. The aim of this study is to analyze land possession, income and land-use diversification of KPK administered Charsadda district. Field data is collected through a sample survey. Furthermore, freely available Landsat 7 satellite images are used to classify land-use classes (e.g., vegetation, built-up) for two different years (e.g., 2005 and 2017) for cross-verification and comparison. The highest 45% of 80% land-owners occupy land-area between 1–10 hectares. Annually, the highest 57.5% of the total farmers / employed in-habitants of surveyed regions earn more than Rs. 100,000 or ~$970 from agriculture activities. About 41.9% land-area covered by agricultural-land is transformed into built-up area since 2007, which is attributed to the increasing demand for buildings and commercial markets. The highest diversification is reported in Naguman area of Charsadda district followed by Rajjar and Niami. Population growth and huge migration of displaced persons from neighboring tribal areas are likely to be few factors which contributed to such a drastic change in land-use pattern since 2007 to 2017. Urgent attention of the policy makers, agricultural experts and society is required to minimize land degradation and to thwart further agricultural-land loss.

Scarcity of water is one of the most serious concerns in plant biology with diverse implications at all the levels of molecular, biochemical, and physiological phenomena of plant growth, development, and consequently the productivity. Most of the strategies to induce or enhance drought tolerance in plants are unreasonably expensive and/or time-consuming. Some studies conducted in the recent past have shown that plant growth regulators (PGRs) may induce/improve physiological tolerance in plants to cope with adverse environmental conditions including drought. The present study was aimed at investigating the effects of foliar spray of GABA (0, 1, 2, and 4 mM) applied 20 days following the germination of seeds, on vegetative growth, morphological characteristics, integrity of cell-membrane, and the levels of photosynthetic pigments and enzymatic antioxidants in carrot cvs. Supertaj and Bharat, grown under 100% and 50% field capacity of soil moisture. The treated and untreated (control) carrot plants were harvested and analyzed 2 weeks following the GABA application. The results revealed that foliar application of GABA improved the vegetative growth and significantly increased the levels of free amino acids, plastid pigments, enzymatic antioxidants, and the relative water content in the root crop grown under 50% field capacity of soil moisture, compared to control. Additionally, the GABA application decreased the electrolyte leakage of ions and melondialdehyde (MDA) content in carrot leaves. The carrots harvested from GABA-treated or untreated (control) plants were not significantly different for their protein contents. In conclusion, the incorporation of GABA in the production management of carrots may help plants to mitigate the adverse effects of water deficit stress.

The Aminofunctional starch/Carboxylated nitrile butadiene rubber (ANS/XNBR) latex films were prepared with control (0), 5, 10, 15, and 20 phr of ANS loadings. The films were subjected to soil burial test for 8 weeks, which recovered every two weeks to quantify the degraded properties. The control (week 0) and biodegraded films were subjected to physical tests (crosslink density, tensile, and tear strength tests) and biodegradation quantification (mass loss retention, and water vapor transmission rates). The optimum physical properties of ANS/XNBR films were subjected to further assessment of its degradation properties which include morphological (optical and scanning electron microscopes (SEM)), Fourier transform infrared (FTIR) analysis, and thermogravimetric analysis (TGA) respectively. Overall, mechanical properties of biodegraded ANS/XNBR latex films decreased as biodegradation period elapses. The biodegradation assessment via water vapor transmission rates and mass loss analyses indicates the high degree of biodegradation rates were observed with higher loading of ANS/XNBR latex films. Morphological analyses via optical microscope shows the transformation of the films surface opacity during biodegradation test. SEM images depicted the microorganism remains on the film surfaces. For FTIR analysis, the most significant changes in the spectras of the films appeared in the region of 790–3000 cm⁻¹. TGA thermograph shows the thermal retention of the materials decreased, as the biodegradation period elapses for optimum ANS/XNBR latex films. From the results obtained, ANS/XNBR latex films shows optimum degradation and mechanical properties at 10 phr filler loading.

The emergence of acute, severe non hepA–E hepatitis of unknown etiology (ASHUE) has attracted global concern owing to the very young age of the patients and its unknown etiology. Although this condition has been linked to several possible causes, including viral infection, drugs, and/or toxin exposure, the exact cause remains unknown; this makes treatment recommendations very difficult. In this review, we summarize recent updates on the clinical manifestations, complemented with laboratory results, case numbers with the global distribution and other epidemiological characteristics, and the possible etiologies. We also provide the proposed actions that could be undertaken to control and prevent further spread of this hepatitis. Since many etiological and pathological aspects of the acute non hepA–E hepatitis remain unclear, further research is needed to minimize the severe impact of this disease.

This paper proposes a hybrid medium access control (MAC) protocol for wireless sensor network (WSN) data gathering, employing unmanned aerial vehicles (UAV). The UAV sends a beacon frame periodically to inform sensor nodes regarding its presence. Afterward, each sensor node which receives beacon frame contends to send registration frame to the UAV. The UAV will transmit the second beacon frame to the registered nodes to notify their transmission schedule. The time-slot scheme is used for the transmission schedule. The transmission schedule of each sensor is determined based on their priority. Specifically, the priority of each sensor is determined during the registration process. Furthermore, the architecture of UAV-WSN data gathering system is introduced in this paper. Simulations are performed, showing that the proposed MAC protocol achieves fairness while enhancing network performance.

Picrasma javanica Blume or also known as Picrasma nepalensis or Picrasma philippinensis is a plant belongs to the Simaroubaceae family, which is known for its secondary metabolites namely quassinoids with various pharmacological properties including antitumor, antimalarial and antiviral. The plant traditionally used as medicine for different diseases in Myanmar, Thailand and Indonesia. The purpose of this study is to discern the phytochemical constituents and pharmacological activities of Picrasma javanica. The background, phytochemical constituents and pharmacological benefits of Picrasma javanica were reviewed and supported from previous studies, including in vivo and in vitro studies. The literature used in the review comprises of published books, journals, reviews and articles published from the year of 1969 to 2018, which are available in ScienceDirect, PubMed, Scopus and GoogleScholar. Chemical structures presented in this paper are either drawn with ACD/ChemSketch. Picrasma javanica possesses several phytochemical constituents, including quassinoids, alkaloids and triterpenoids. Compounds of the plant were isolated and studied for their pharmacological activities such as antimalarial, antiproliferative, antiviral, antimicrobial and membrane stabilising activity. Most importantly, these studies showed that the key players for the pharmacological benefits are quassinoids and alkaloids present in the plant.Picrasma javanica indeed has therapeutic potentials which may be beneficial for people. However, further extensive studies must be done on the plant as the detailed information on its pharmacological activities are still lacking.

In this paper, a local meshless method (LMM) based on radial basis functions (RBFs) is utilized for the numerical solution of various types of PDEs, due to the flexibility with respect to geometry and high order of convergence rate. In case of global meshless methods, the two major deficiencies are the computational cost and the optimum value of shape parameter. Therefore, research is currently focus towards localized radial basis function approximations, as the local meshless method is proposed here. The local meshless procedures is used for spatial discretization whereas for temporal discretization different time integrators are employed. The proposed local meshless method is testified in terms of efficiency, accuracy and ease of implementation using regular and irregular domains.

Reliability is essential in industrial networks. In addition, most of the data from nodes of industrial Internet of Things (IIoT) are generated in real time. Thus, those data are mainly used for the time-sensitive applications. Furthermore, device failures should be considered when modeling reliable fog computing for IIoT. In this paper, we provide fundamental aspects to model reliable fog computing for IIoT. First, existing models of fog computing are compared. Then, the most feasible communication type to achieve a reliable system is determined from model analysis. Interaction modes are elaborated to study the advantages and drawbacks when communication is deployed in fog computing for IIoT, and challenges and solutions for reliable fog computing are discussed.

The study aims to examine the effects of artificial intelligence (AI) on the consistency and analysis of financial statements in hotels in ASEZA, Jordan. This research is an exploratory, empirical study, which uses the methodology of data collection and interpretation to draw conclusions. The researchers used the arithmetic mean, standard deviation, T-test and ANOVA test to calculate the degree of significance of the study questions. The findings of a basic linear regression study of the impact of AI implemented in Jordanian hotels on the integration of accounting information systems and the association between AI and the integration of accounting information systems (R = 59.6%) also indicate that the fixed limit value amounted to (2.060) and the value of (Beta) for T-test

COVID-19 has created anxiety not only in individuals but also in health organizations, and countries worldwide. Not a single industry is left un-influenced and loss is being estimated in billions of dollars. The widespread of this pandemic disease has challenged researchers all over the world. Some of the researchers are working to invent its cure while, others are applying computing technologies to stop its spread, by analyzing and identifying patterns for prediction and forecasting. This is by no doubt the hottest area of research for the last 100 years. This survey has targeted the research published in computing sub-domains to combat the pandemic. The survey has clustered the scientific efforts into logical groups: surveillance, metrological effects, social media analytics, image processing and business and economy, analysis and modeling. It will serve as a leading source for the followings: researchers who want to identify what has been achieved in different computing sub-domains, those who need fresh authenticated datasets openly accessible for different research contexts and what are future directions in this area of research. The findings of analysis and modeling can be also useful for government agencies who want to set priorities and formulate policies.

Biological control provides a safer alternative to reduce the population of agricultural pest. Mirabilis jalapa is one of biopesticides containing chemical substances that have a feeding deterrent property against Spodoptera litura as folifagus insect pest. This study aimed to analyze the humoral and cellular immunes responses of S. litura after exposure to biopesticide extracted from M. jalapa. The measured indicator immune responses were activity of hemocyte, lectin, phenoloxidase (PO), and phagocytic activity. The results showed that the average total hemocyte was different significantly depending on the treatment. Exposure to 0.1% and 0.2% (w/v) of M. jalapa extract increased the total number of hemocytes as much as 38.08% and 64.15%, respectively. Lectin was quickly formed at 0.1% and 0.2% (w/v) concentrations. The amount of PO enzymes was significantly different at sublethal concentrations compared with control samples (P < 0.05). The highest increase in PO activity occurred at 2 h post-treatment and at M. jalapa extract concentrations of 0.2% (592.33 IU/mg) and 0.1% (521.33 IU/mg), whereas the highest concentration of the extract (0.8% w/v) caused a decrease in lectin and PO activities. In terms of phagocytic activity, the proportion of phagocytosis cells were 47.62% in control group, and decreased significanlty in both concentrations exposure.

Curcumin has restrained clinical applications due to poor bioavailability. This study aimed to synthesize cockle shell-derived calcium carbonate (aragonite) nanoparticles (CSCaCO3NP) for delivery of curcumin and to evaluate its kinetic release in vitro. CSCaCO3NP was synthesized and conjugated with curcumin (Cur-CSCaCO3NP) using a simple top down approach and characterized for its physicochemical properties as a potential curcumin carrier. In vitro release profile was assessed using dialysis bag membrane method. The release data were fitted to Korsmeyer-Peppas, Zero order and Higuchi models to evaluate the mechanism of release pattern. A spherical shaped CSCaCO3NP with a surface area of 14.48±0.1 m2/g, average mean diameter size of 21.38±2.7 nm and a zeta potential of -18.7 mV was synthesized which has a high loading content and encapsulation efficiency. The FT-IR and XRD revealed less observable changes on the peaks after conjugation. In vitro kinetic release profile demonstrated sustained release and best fitted to the Higuchi equation model. The results of this study showed the capacity of the synthesized CSCaCO3NP to encapsulate curcumin efficiently with a stable release in vitro. This could give an insight and supportive ideas on the potentials of CSCaCO3NP for curcumin delivery. Therefore, CSCaCO3NP holds future prospects in preclinical framework to enhance curcumin efficacy for oral therapeutic applications.

During December 2019, a novel coronavirus named SARS-CoV-2 has emerged in Wuhan, China. The human to human transmission of this virus has also been established. The virus has so far infected more than 2 million people and spread over 200 countries. The World Health Organization (WHO) has declared COVID-19 a global health emergency due to its spread well beyond China. It has been established that this virus originates from bats and uses an intermediate host for transfer to humans. The knowledge about the intermediate host is important to find the virus shuttle mechanism to stop future outbreaks. For this, the genetic and structural analysis of coronaviruses spike proteins was performed using a computer-assisted approach.To conduct the In silico analysis, 43 sequences of spike protein belong to different species were retrieved from the NCBI nucleotide database. Pairwise and multiple sequence alignments were performed to check the similarities and differences of the retrieved sequences. Moreover, to highlight relationships among different species, phylogenetics analysis was performed using the MEGA software tool. In the end, protein structure alignment (superimposition) was performed against the reference structure by UCSF Chimera software. The results highlighted that the maximum similarity of human protein was found against Bat and Pangolinsequences. Moreover, among Bat and Pangolin, the highest similarity was found against pangolin based on phylogenetics analysis. These results suggest that SARS-CoV-2 transfers from bats to humans through pangolins.

Increase demand for palm oil production has indirectly increased waste and pollution. Empty fruit bunch (EFB), which is the major solid waste from this industry, has the potential to be further treated into valuable product. In this study, cellulose will be extracted from EFB through alkali treatment and acid hydrolysis treatment with a different approach and further modified via acetylation and silylation technique. The modified samples are to be utilized to reduce pollution due to palm oil mill effluent (POME) and carbon dioxide (CO2) emission from the industry. The characterization of the extracted and modified cellulose was carried out using attenuated total reflectance-Fourier transform infrared (ATR-FTIR), thermogravimetric analysis (TGA) and scanning electron microscope (SEM). ATR-FTIR analysis revealed that the cellulose was successfully extracted from raw EFB and the cellulose-acetyl, nanocrystalline cellulose (NCC) and cellulose-2 has been successfully modified from the cellulose. TGA analysis shows that both modified cellulose have higher thermal stability compared to raw EFB and extracted cellulose. SEM morphology of the modified cellulose shows a higher surface area due to the wrinkled formation while the wax layer and cuticle pore has been diminished clearly. The modified sample gave a significant performance where cellulose-acetyl absorbed 98.5% of oil compared to unmodified cellulose-1 sample that only absorbed 5% of oil from POME. NCC-AEAPDMS adsorbed physically and chemically 3.5 cm3/g CO2 gas compared to NCC sample, which undergoes only physical adsorption with maximum capacity up to 2.4 cm3/g. Thus, modification can enhanced the performance of cellulose for industrial applications.