Fabrication of a nanocrystal zinc oxide (ZnO)/nitrogen-doped (N-doped) graphene composite using a novel and facile in situ sol-gel technique is demonstrated. Two-dimensional nanostructure morphology with uniform ZnO nanoparticles (average diameter of 10.25 nm) anchored on N-doped graphene nanosheets was observed via electron microscopy. Because of the polar heteroatoms on the graphene sheets, an abundance sites for polysulfide absorption were provided. More importantly, the strong chemical interaction between ZnO and polysulfides efficiently hindered the transport of polysulfides. Consequently, the lithium/sulfur (Li/S) battery with the ZnO/N-doped graphene composite-coated separator delivered enhanced performance in terms of discharge capacity and cycling stability when compared to the cell with a normal separator. With the modified separator, the battery achieved a discharge capacity as high as 942 mAh g^-1 for the first cycle and remained at 90.02 mAh g^-1 after the 100th charge/discharge test at 0.1 C. Results indicate that impeding the shuttling of polysulfides contributes to efficiently improving the behavior of the Li/S battery.

Three kinds of inorganic alkali are introduced into tetraethylenepentamine (TPEA) and polyethyleneimine (PEI) modified MCM-41 as the CO2 adsorbents. FT-IR and TGA are used to characterize the surface groups and the thermal stability of adsorbents. Chemical titration method is used to measure the alkali amounts of adsorbents. Thermo-gravimetric analysis with 10%CO2/N2 as the simulated flue gas is used to test the CO2 adsorption performance of adsorbents. The results show that all three kinds of inorganic alkali containing adsorbents exhibit promoted CO2 adsorption capability than traditional TPEA and PEI modified samples. Ca(OH)2 and PEI modified samples exhibit the highest adsorption capacity and stable regeneration property. The introduction of inorganic alkali changes the chemical adsorption mechanism between CO2 and increases the effective alkali amounts due to its hydroxyl groups. The CO2 adsorption capacities have a linear dependence relation with the alkali amounts of adsorbents, indicating that alkali amount is a critical factor for novel adsorbents exploring.

As one of the world's most populous countries, Indonesia is struggling with the composition of its people, the majority of whom are unemployed productive-age individuals with low education levels. Another issue is the high poverty rate, which is followed by issues of gender inequality. The government cannot solve these social issues on its own. There is a need for community support to solve these problems through sustainable social entrepreneurship activities. Using the Theory of Planned Behavior and Outcome Expectation, this study will determine the factors that influence the interest of individuals known as the Z and Millennial generation, aged 18 to 34 years old, in becoming social entrepreneurs. This study applied a quantitative approach with a judgmental sampling technique to a sample of Generation Z and Millennials who have ever participated in social activities but have not yet started their own business. The study gathered 210 respondents, who were then analyzed using the PLS-SEM method with multiple group analysis generation-based comparison. According to the findings, the Millennial Generation's Attitude Toward Behavior, Subjective Norms, and Outcome Expectation all had a positive impact on Social Entrepreneurial Intention. Meanwhile, Subjective Norms had no effect on Social Entrepreneurial Intention in the Z Generation. Only attitude toward behavior, perceived behavioral control, and outcome expectation have a positive effect on the development of social entrepreneurial intentions. Furthermore, the findings of this study confirm that subjective norms influence attitude toward behavior and Perceived Behavioral Control in both Generation Z and millennials.

The aim of this article has been to evaluate the impact of a physical-sport education programme, based on the pedagogical model of Sport Education within the framework of quality Physical Education and approached from the field of social and emotional learning, on a set of psychological variables: subjective well-being (quality of life related to health, positive affect and negative affect); trait emotional intelligence and social anxiety. A total number of 113 Compulsory Secondary Education students were involved, aged 12 to 15 years old, 44 of whom belonged to the control group (CG) and 69 to the experimental group (EG). A quasiexperimental design of repeated pretest and posttest measures with the CG was used. The results obtained in this investigation revealed that the intervention programme caused significant improvements in the subjective well-being and the trait emotional intelligence for the EG. These findings reinforce the pedagogical efficiency of the programme with regards to the aim that has been set. Likewise, the findings also highlight the suitability and appropriateness in terms of innovative teaching proposals. In the same way, the results showed relevant empirical contributions in this given school context due to its psychological benefits and the encouragement of healthy living.

Elaborate sound design, including background music, ambient sounds (sounds describing the game world), and character sounds (sounds generated by the character’s actions), plays a pivotal role in modern videogames. However, the influence of these different types of sound on the player experience has not been extensively researched. This study examines the influence of these sound types on immersion, avatar identification, fun and perceived competence. In two experiments, participants played League of Legends in four different sound conditions. The first experiment revealed a non-significant trend in the effect of character sound on avatar identification. Ambient sounds, however, were limited in this experiment because the task restricted participants’ movement across the game map. Consequently, we adapted the task to allow for a wider variety of ambient sounds in the second experiment. Here, a significant impact of character sounds on immersion, avatar identification, and fun, was observed, as well as an interaction effect of character sounds and ambient sounds on fun. Furthermore, we observed a trend, though not statistically significant, suggesting that ambient sounds may influence the player’s sense of flow. These findings underline the distinct effects of different sound types and we discuss implications for the design of sound in video games.

One third of a person’s life is spent on sleep, therefore the quality and habit of sleep affects health. A single case study indicated that perspiration could serve as a prognostic marker. Diagnosing nocturnal perspiration is common clinical practice, since this serves as a major symptom in many pathologies. Till this day no specific evidence-based approach for diagnosing nocturnal perspiration exists. By introducing the Q-strip, a device which quantitatively measures nocturnal perspiration, this could be acquired. The Q-strip could serve a purpose in diagnosing nocturnal perspiration more efficient without being intrusive. In addition to its health sensing potentials, the Q-strip makes it possible to visualise perspiration patterns. This introduces the possibility to examine the quality of sleep. Future research is recommended to investigate this.

In addition to the traditional QoS metrics of delay, delay jitter, and packet loss probability (PLP), Quality of Experience (QoE) is now widely accepted as a numerical proxy for actual user experience. The literature has reported many mathematical mappings between QoE and QoS. These QoS parameters are measured by the network providers using sampling. There are some papers studying sampling errors in QoS measurements; however there is no account of propagation of these sampling errors to QoE evaluation. In this paper, we used industrially acquired measurements of PLP and jitter to evaluate the sampling errors and correlation in measurements. Focussing on Video-on-demand (VoD) applications, we use subjective testing and regression to map QoE metrics onto PLP and jitter. The resulting mathematical functions of QoE and theory of error propagation was used to evaluate the propagated error in QoE, and this error was represented as confidence interval. Using the guidelines of UK government for sampling, our results indicate that confidence intervals around estimated QoE in a busy hour can be between MOS=1 to MOS=5 at targeted operating point of QoS parameters. These results are a new perspective on QoE evaluation, and are of great significance to all organisations that need to estimate the QoE VoD applications precisely.

The objective of the present paper is to get a better understanding of the electrochemical properties of organoclays, which were prepared via solid-state intercalation of three cationic surfactants, such as dodecyltrimethylammonium, tetradecyltrimethylammonium, and hexadecyltrimethylammonium, as bromide salts, at different loading levels into the interlayers of two natural smectite clays (AH and DI). The electrochemical properties of the prepared organoclays were investigated by cyclic voltammetry. The cyclic voltammetry response of the electrochemical probe, 〖Fe(CN)〗_6^(3-)/〖Fe(CN)〗_6^(4-), shows that the intensities of the anodic and cathodic peaks don’t increase when the working electrode is based on carbon paste modified with the raw clays (AH or DI), whereas the peaks intensities increase significantly when the working electrode consists of carbon paste modified with organoclays. This increase in the intensity of the current indicates an improvement in the surface conductivity of the carbon paste electrode when they are modified with organoclays. When the working Electrode is based on organoclays modified carbon paste, the potential differences (ΔEp) are ranged between 140 and 170 mV, which are lower than those of the unmodified carbon paste electrode (330 mV) and those modified with raw clays (520 mV). This indicates an easy electron transfer process on the surface of the organoclays modified carbon paste electrodes.

This study examined the tourism spatial distribution of nine cities in the Fujian province and assessed the impacts of COVID-19. The modified gravity model found that it was widely dispersed, with uneven and relatively independent tourism development in different cities. The social network analysis showed that tourism connections across cities were significantly reduced after the pandemic. The impacts of brand awareness and transport accessibility on spatial networks were positive in pre-pandemic but became negative during the pandemic. In contrast, tourist volume had negative impacts on spatial networks in pre-pandemic but had positive ones during the pandemic. Tourism resources and market performance had significantly positive impacts in the post-pandemic era. These findings provide advice on tourism recovery and destination management in coping with future critical events. It also contributes to the theoretical gravity framework in tourism and the research scope of the social networks analysis at the city level.

The aim of this study was to assess and contrast the effects on the vertical marginal fit of full contour CAD/CAM generated monolithic zirconia crowns pre- and post-cementation of employing chamfer finishing line designs with various occlusal reduction schemes (planar and flat) and cements. Material and Method: Forty sound human maxillary first premolars were selected for this study. Samples will be divided into two main groups of twenty samples in each group according to the occlusal reduction scheme: Group A: chamfer finishing line design with planar occlusal reduction scheme. Group B: chamfer finishing line design with flat occlusal reduction scheme. Each main group will be subsequently separated into two smaller groups based on the kind of cement that was utilized (n=10) Subgroup A1: crowns will be cemented by using resin-modified Glass Ionomer cement (Fuji Plus). Subgroup A2: crowns will be cemented using a Universal adhesive system (Duo Estecem II). Subgroup B1: crowns will be cemented by using Fuji Plus. Subgroup B2: crowns will be cemented using a Duo Estecem II. Result: Marginal gaps were measured at 4 indentations, using a Dino light-stereomicroscope (230X). Paired T-tests and student t-tests analyzed the data. Prior to cementation, subgroup A1 scored the lowest mean of vertical marginal gap values (80.284±23.021), while subgroup B2 scored the highest mean (118.597±9.956); following cementation, subgroup A1 scored the lowest mean of vertical marginal gap values (95.45±17.598), and subgroup B2 scored the highest mean of vertical marginal gap values (134.806 ±8.114). Chamfer finishing line design with a planar occlusal reduction scheme could be a preferable occlusal reduction scheme.

Introduction: Antitumor host immune response is an important factor, but its role is not fully established. The role of tumor infiltrating lymphocytes (TIL) in breast cancer as an immunological biomarker has been significantly explored over the past years. The number of patients treated with neoadjuvant chemotherapy (NAC) increased and identification of a biomarker to predict the probability of pCR (pathological complete response) is a high priority. Materials and methods: We evaluated 334 cases of BC treated with NAC followed by surgical resection from 2020-2022 in Ist Clinic of Oncological Surgery, Oncological Institute "Prof Dr I Chiricuta" Cluj Napoca. Of the above, 122 cases were available for histological evaluation both in pre-NAC biopsy and post-NAC resection tissue. Evaluation of biopsy fragments and resection parts using hematoxylin eosin (H&E). The TIL evaluation took place according to the recommendations of the International TIL Working Group (ITILWG). Results: There was a strong association between elevated levels of pre-NAC TIL. At the same time, there is a statistically significant correlation between stromal TIL and tumor grade, the number of lymph node metastases, the molecular subtype, and the number of mitoses (p <0.005). Intratumoral TIL showed a significant correlation with tumor size, distant metastasis, molecular subtype, number of mitosis, stage and lymph node metastasis (p<0.005). We also demonstrated that high pre-NAC TILs represent a strong predictive marker for pCR. Conclusion: This study reveals the role of TIL as a predictive biomarker in breast cancer not only for the well-established TNBC (triple negative breast cancer) and HER2+ (Her2 overexpressed) subtypes but also in Luminal A and B molecular subtypes. In this scenario, the evaluation of TILs as novel predictive and therapy-predicting factors should become a routinely performed analysis that could guide clinicians into the choice of the most appropriate therapy.

Genetic engineering technology offers opportunities to improve many important agronomic traits in crops, including insect-resistance. However, genetically modified (GM) exogenous proteins in edible tissues of transgenic crops has become an issue of intense public concern. To advance the application of GM techniques in maize, a Cre/loxP-based strategy was developed for manipulating the transgenes in green tissues while locking it in non-green tissues. In the strategy, the site-specific excision can be used to switch on or off the expression of transgenes at specific tissues. In this work, two basic transgenic maize named KEY carrying the Cre gene and LOCK containing the Vip3A gene with a blocked element, were obtained based on their separate fusion gene cassettes. The expression level and concentration of Vip3A were observed with high specific accumulation in green tissues (leaf and stem), and only a small amount in root and kernel tissues in the KEY × LOCK hybrids. The insect-resistance of transgenic maize against two common lepidopteran pests, Ostrinia furnacalis and Spodoptera frugiperda, was assessed in the laboratory and field. The results indicated that the hybrids possessed high resistance levels against the two pests, with mortality rates above 73.6% and damage scales below 2.4 compared with the control group. Our results suggested that the Cre/loxP-mediated genetic engineering approach has a competitive advantage in GM maize. Overall, findings from this study are significant for providing a feasible strategy for transgenes avoiding expression in edible parts and exploring novel techniques toward the biosafety of GM plants.

A reliable finite element procedure to simulate shear-dominated ductile fracture in large-scale, thin-walled steel structures is still evolving due primarily to the challenges in determining the fracture criterion of steel materials under complex stress states. This paper aims to examine the accuracy of the modified Gurson-Tvergaard-Needleman (GTN) model considering the shear failure in simulating ductile fracture of steel plate structures under quasi-static punch loading. The modified GTN damage models are performed by ABAQUS user defined material subroutine (VUMAT). The void related parameters and shear damage parameters of Xue’s and N-H modified GTN models are calibrated from test specimens with various geometries corresponding to different stress triaxiality and shearing conditions. The damage evolution associated with the shearing of voids in the modified GTN models has strong influences on the stress triaxiality versus equivalent plastic strain under complex stress states, especially for the shear dominated loading conditions. Based on the original GTN model, Xue’s model, and N-H modified GTN model with calibrated material parameters, a numerical comparative study examines the ductile fracture of steel non-stiffened plate and stiffened plate under punch loading. Benchmarked against the experimental studies, the numerical simulations demonstrate that the shear driven void evolution in the modified GTN model imposes significant effects on the load-displacement responses, as well as the onset and extension of ductile fracture in steel plates under punch actions. The N-H modified model with calibrated shear damage parameters shows a better correlation with the ductile fractures in steel plates observed in the experiment, than the original GTN model and Xue’s modified GTN model. As a result of this study, the modified GTN model considering the shear failure can be applied for practical applications in the crashworthiness assessment of ship collision and grounding.

The Sun is a frame at relative rest in which sunlight travels at the emitted speed c. Earth travels at the revolving speed v in this frame. The reflection of light as a mechanical phenomenon applies to the modified Michelson interferometer employed by Miller in his experiments with light from the Sun. Unlike the Tomaschek experiments, which use light from stars that may travel in the Universe at velocities different from that of the Sun, the fringe shifts in the Miller experiments are predictable. Based on Michelson's derivation, Miller expected in his experiments at Mount Wilson a 1.12 fringe shift and observed a fringe shift of 0.08 in 1921 and 0.088 in 1925. The reflection of light as a mechanical phenomenon predicts zero fringe shift for Miller's experiment agreeing only with his observations at the Cleveland laboratory in 1924.

In this paper we have defined the effect of bulk viscosity on Quintessence model and scaler field potential as well as on classical field. We have shown the same effect for modified gravity with f(R,T)= R+f(T). In the derivation we have predicted the possibility of time dependent evolution of gravitational constant G and anisotropy.

CRISPR-Cas9 technology allows the modification of DNA sequences in vivo at the location of interest. Although CRISPR-Cas9 can produce genomic changes that do not require DNA vector carriers, the use of transgenesis for stable integration of DNA coding for gene-editing tools into plant genomes is still the most used approach and it can generate unintended transgenic integrations, while Cas9 prolonged expression can increase cleavage at off-target sites. In addition, the selection of genetically modified cells from millions of treated cells, especially plant cells, is still challenging. These downfalls can be avoided with the delivery of preassembled ribonucleoprotein complexes (RNPs) composed of purified recombinant enzyme Cas9 and in vitro- transcribed guide RNA (gRNA) molecules in a protoplast system. We therefore aimed to develop the first DNA-free protocol for gene-editing in maize and introduced RNPs into their protoplasts with PEG 4000. We performed effective transformation of maize protoplasts using different gRNAs sequences targeting the inositol phosphate kinase gene and applying two different exposure times to RNPs. Using low-cost Sanger sequencing protocol, we observed an efficiency rate of 0.85 up to 5.85%, which is equivalent to DNA-free protocols used in other plant species. A positive correlation was displayed between exposure time and mutation frequency. Mutation frequency was gRNA sequence- and exposure time-dependent. In summary, we demonstrated the suitability of RNP transfection as an effective screening platform for gene-editing in maize. This efficient and relatively easy assay method for selection of gRNA suitable for editing of gene of interest will be highly useful for genome editing in maize, since genome size and GC-content are large and high in maize genome, respectively. Nevertheless, the large amplitude of mutations at target site requires scrutiny when checking mutations at off-target sites and potential safety concerns.

The gravitational charge should be the energy instead of mass. This modification will lead to some different results and the experiments to test are also presented. Especially, we propose a scheme to achieve the negative energy and gravitational repulsive force in the lab.

In this study, the effect of heat treatment was investigated to influence the occurrence of fracture during manufacturing process of Alloy B steel with boron contents as high as 130 ppm. As the content of boron increases, it affects the phase transformation temperature and texture. The development of {111}<uvw> components in the γ-fiber is affected depending on the austenite fraction after phase transformation. The Alloy B steel indicated that the increase in the boron content increased the α to γ phase transformation temperature such that sufficient transformation did not occur in the normalizing condition. The cracks occurred at the point of the transition from elastic to plastic deformation in the ND direction during the rolling process, thereby resulting in failure. Therefore, it is necessary to avoid the intermediate heat treatment condition in which γ-fiber does not fully develop, i.e., an imperfect normalization.

Background In SILIUS (NCT01214343), combination of sorafenib and hepatic arterial infusion chemotherapy did not significantly improve overall survival in patients with advanced hepatocellular carcinoma (HCC) compared with sorafenib alone. In this study, we explored the relationship between objective response by mRECIST and overall survival (OS) in the sorafenib group, in the combination group and in all patients in the SILIUS trial. Methods Association between objective response and OS in patients treated with sorafenib (n=103), combination (n=102) and all patients (n=205) were analyzed. The median OS of responders was compared with that of non-responders. Landmark analyses were performed according to objective response at several fixed time points, as sensitivity analyses, and the effect on OS was evaluated by Cox regression analysis with objective response as a time-dependent covariate, with other prognostic factors was performed. Results In the sorafenib group, OS of responders (n = 18) was significantly better than that of non-responders (n = 78) (p < 0.0001), where median OS was 27.2 (95% CI, 16.0–not reached) months for responders and 8.9 (95% CI, 6.5–12.6) months for non-responders. HRs from landmark analyses at 4, 6, and 8 months were 0.45 (p=0.0330), 0.37 (p=0.0053), and 0.36 (p=0.0083), respectively. Objective response was an independent predictor of OS based on unstratified Cox regression analyses. In the all patients and the combination group, similar results were obtained. Conclusion In the SILIUS trial, objective response was an independent prognostic factor for OS in patients with HCC.

Mass insect rearing can have a range of applications, for example in biological control of insects. Since the performance of released biological control agents determines efficacy, the competitive fitness of insects post release is a key variable. Here, we tested whether inoculation with a gut symbiont, Enterobacter cloacae, and gnotobiotic rearing of larvae could improve insect growth and male competitive fitness of a transgenic diamondback moth, which has shown variation in fitness when reared in different insectaries. All larvae were readily infected with the focal symbiont. Under gnotobiotic rearing pupal weights were reduced and there was a marginal reduction in larval survival. However, gnotobiotic rearing substantially improved the fitness of transgenic males. In addition, in gnotobiotic conditions, inoculation with the gut symbiont increased pupal weights and male fitness, increasing the proportion of transgenic progeny from 20 to 30% relative to symbiont-free insects. Gnotobiotic conditions may improve the fitness of transgenic males by excluding microbial contaminants, while symbiont inoculation could further improve fitness by providing additional protection against infections, or by normalizing insect physiology. The simple innovation of incorporating antibiotic into diet, and inoculating insects with symbiotic bacteria that are resistant to that antibiotic, could provide a readily transferable tool for other insect rearing systems.

Oriental lacquer, a natural and renewable polymeric coating, comes from the sap produced by lacquer trees. For practical application, oriental lacquer must be refined to reduce excess water and enhance its quality. In this study, drying oils were blended with oriental lacquer during the refining process to prepare an oil-modified refined lacquer (OMRL). The type and adding amount (0, 10, and 20% by wt.) of drying oils for wood coatings utilization were evaluated. Rhus succedanea oriental lacquer is composed of 54.1% urushiols, 34.3% water, 7.2% plant gum, and 4.4% nitrogenous compounds, and drying oils, including tung oil (TO), linseed oil (LO), and dehydrated castor oil (DCO) were used as materials in this study. The results show that the drying oil acts as a diluent, which reduces the viscosity and enhances the workability and could shorten the touch-free drying time and speed up the hardened drying of the OMRL. The results also indicate that the hardness, mass retention, Tg, tensile strength, abrasion resistance, and lightfastness of OMRL films decrease as more drying oils are blended. Conversely, the bending resistance, elongation at break, impact resistance increase, and particularly, the gloss, is greatly improved through the blending of more drying oils. In conclusion, the LO-modified refined lacquer (RL) has the highest film gloss and the DCO-modified RL has the shortest drying time for coating; otherwise, the film properties are similar among the three types of drying oil.

Philip Morris International (PMI) has developed the Population Health Impact Model (PHIM) to quantify, in the absence of epidemiological data, the effects of marketing a candidate modified risk tobacco product (cMRTP) on the public health of a whole population. Various simulations were performed to understand the harm reduction impact on the U.S. population over a 20-year period under various scenarios. The overall reduction in smoking attributable deaths (SAD) over the 20-year period was estimated as 934,947 if smoking completely went away and between 516,944 and 780,433 if cMRTP use completely replaces smoking. The reduction in SADs was estimated as 172,458 for the World Health Organization (WHO) 2025 Target and between 70,274 and 90,155 for the gradual cMRTP uptake. Combining the scenarios (WHO 2025 Target and cMRTP uptake), the reductions were between 256,453 and 268,796, depending on the cMRTP effective dose. These results show how a cMRTP can reduce overall population harm additionally to existing tobacco control efforts.

Amidst the challenges posed by the COVID-19 crisis, marked variations in individuals' resilience and vulnerability have emerged. This eight-month longitudinal study engaged 535 community adults (58% female, M_age = 43.97) to explore the nuanced aspects of coping and personal growth during the challenging period. Grounded in Self-Determination Theory, the research examines the influence of autonomy support from close others—manifested through active listening and providing choices—on psychological need satisfaction (i.e., autonomy, competence, and relatedness), integrative regulation of emotions; posttraumatic growth; and subjective well-being (positive affect and life satisfaction). Structural equation modeling revealed that, over time, the experience of psychological need satisfaction was intricately related to integrative regulation, posttraumatic growth, positive affect, and life satisfaction. Notably, the impact was partially mediated by autonomy support. These findings shed light on the pivotal role that autonomy supported relationships play in fostering personal growth and meaning making during life's difficult junctures. The study underscores the practical significance of purposeful support from close others and paves the way for future research endeavors.

Urban spatial perception critically influences human behavior and emotional reactions, emphasizing the necessity of aligning urban spaces with human needs for enhanced urban living. However, functionality-based categorization of urban architecture is prone to biases, stemming from disparities between objective mapping and subjective perception. These biases can result in urban planning and designs that fail to cater adequately to the needs and preferences of city residents, negatively impacting their quality of life and the city's overall functionality. In this study, we apply machine learning to elucidate these biases within urban spatial perception research, utilizing a three-step methodology: objective mapping, subjective perception analysis, and perception deviation assessment. Our findings reveal that machine learning can expose hidden patterns within this research field, bearing substantial implications for urban planning and design. Of particular note, the study revealed significant discrepancies in the distribution centroids between commercial buildings and residential or public buildings. This result illuminates the spatial organization characteristics of urban architectural functions, serving as a valuable reference for urban planning and development. Moreover, it uncovers the advantages and disadvantages of different data sources and techniques in interpreting urban spatial perception, paving the way for a more comprehensive understanding of the subject. These findings underscore the importance of integrating both objective mapping and subjective perspectives in urban architectural functionality classification.

The increasing enhancement in the modulation accuracy of spatial light modulators has garnered significant attention towards real-time control technology for light fields based on these modulators. It has been empirically demonstrated that this technology possesses a remarkable capability to generate vector beams with arbitrary complex amplitude distributions. Nevertheless, past studies indicate that the generation of only one vector beam at a time has been observed. The simultaneous generation of numerous vector light fields can give rise to several challenges, including compromised picture quality, limited single mode operation, and intricate optical path configurations. In pursuit of this objective, we present a novel methodology that integrates the coding methodology of modified off-axis interferometric holography with the idea of optical superposition. This technique facilitates the concurrent generation of several vector beams. In this study, we present a demonstration of the simultaneous creation of twelve vector beams using a single spatial light modulator (SLM) as a proof of concept. Significantly, this technology has the ability to generate an unlimited quantity of vector light fields concurrently, under the assumption that the resolution of the SLM does not impose any limitations. The findings indicate that the imaging quality achieved by this technology is of a high standard. Furthermore, it is possible to separately control the beam waist radius, topological charge, polarization order, and extra phase of each beam.

COVID-19 has rapidly spread worldwide since December 2019. During the pandemic, SARS-CoV-2 repeatedly mutated from Alpha to Omicron. The severity and mortality are related to age, sex, and underlying diseases (respiratory, cerebrovascular, cardiovascular, metabolic, cancer, and immune diseases). We retrospectively studied 44 hospitalized stroke patients infected with the SARS-CoV-2 Omicron variant. The mortality rate of hospitalized stroke patients with COVID-19 was 6 (13.6%). The cause of death was coagulopathy in 3 cases of ischemic stroke. High modified Rankin Scale score（mRS）of stroke patient was correlated with severity of COVID-19. The timing of vaccination is inversely correlated with COVID-19 severity. In conclusion, stroke patients with COVID-19 have high mortality rates attributed to coagulopathy. Stroke patients with high mRS scores are more likely to develop severe COVID-19. In high mRS scores, therapy for severe COVID-19 should be administered.

This study will lead to the development of a numerical data set that will assist in the design of Savonius wind turbines. A major objective of this study is to develop a better design for Savonius turbine blades in order to increase their torque coefficients, rotational speeds, and pressure coefficients. As part of the experimental design methodology, a full dataset was generated by simulating three-dimensional scale models utilizing computational fluid dynamics (CFD) simulations that were validated by wind tunnel data. This process is multi-objective optimization for optimizing turbine performance. The twist angle, aspect ratio, and overlap ratio are all important factors in determining the optimal torque and power coefficients. The group method of data handling (GMDH) algorithm was utilized to model objective functions based on input-output data. The Pareto fronts were plotted using polynomial models obtained from the evolutionary Pareto-based optimization approach (modified NSGA-II), and the optimal commercial points were determined using TOPSIS. A comparison of three- and two-objective optimization data revealed that two-objective optimization data lie within the boundaries of a three-objective optimization problem. The torque coefficient, rotational speed, and power coefficient are all improved by 13.74%, 0.071%, and 5.32%, respectively, using multi-objective optimization. As a result of the multi-objective optimization of the turbine, some significant characteristics of objective functions were discovered.

The current study explores the problem of illiquidity in the corporate bond market and examines a broad set of liquidity proxies through empirical investigation. Purpose: The purpose of this paper is to give solution to the global issue of illiquidity in the corporate bond market. The problem is identified by many researchers and this paper attempts to find out the viable solution of the "fungibility route" as an alternative to the "liquidity route". Design/ Methodology: An Analysis of a sample size of 2,34,772 trade data of corporate bonds and a sample size of 2,00,607 trade data of G-securities is done to identify the problem. Findings / Solution proposed: A mathematical model based on credit risk differential and sensitivity differential is proposed to find out the fair value at which an illiquid bond can be swapped by a liquid bond. To arrive at the fair value of the illiquid bond, we have calculated risk adjusted discount rate using modified duration and credit risk differential. With our solution, it is possible to enhance the liquidity of the bond not directly but through fungibility route. Originality: the research is first of its kind in which solution is given to the global problem of corporate bond illiquidity. To execute the trade in the fungibility route, proposed parties involved are the Fungibility platform, the initiator, and the bidder. The derived fair value would facilitate trade and serve as an exit strategy for illiquid bond holders worldwide.

In this paper, the research progress on dynamic behaviors of RC structural members is reviewed from experimental, theoretical and numerical perspectives. Firstly, the basic overview, measurement methods, main conclusions and current limitations of available dynamic loading tests are presented. Then the theoretical studies on the dynamic constitutive models of RC materials, the dynamic increase factor (DIF) model for concrete and reinforcing steel and the proposed modified models of dynamic behavior parameter at the structural member level are summarized. Finally, the available modelling approach and the method for incorporating the dynamic effect in numerical simulation of RC structures are reviewed. Moreover, a brief introduction is made to the dynamic hysteretic model established on the experimental data, which provides an alternative approach to consider the dynamic effect beside the commonly used DIF method. This paper provides valuable reference for experimental studies and numerical simulations on the dynamic behaviors of RC structures, and also puts forward some issues that need to be solved in the future research works..

International guidelines are published in oncology to provide standardized information and fertility preservation (FP) care for adults and children with cancer. For benign gynecologic diseases (BGD), many recommendations are based on data coming from oncofertility studies rather than studies with a stronger and broader evidence base. The purpose of the study was to conduct a modified Delphi process for generating FP guidelines for BGD. A steering committee identified 42 potential FP practices for BGD. Then 114 key stakeholders were asked to participate in a modified Delphi process via two online survey rounds and a final meeting. Consensus was reached for 28 items. Among them, stakeholders rated age-specific information concerning the risk of diminished ovarian reserve after surgery as important but rejected proposals setting various upper and lower age limits for FP. All women should be informed about the benefit/risk balance of oocyte vitrification, in particular about the likelihood of live birth according to age. FP should not be offered in rASRM stages I and II endometriosis without endometriomas. These guidelines could be useful for gynecologists to identify situations at risk of infertility and to better inform women with BGDs who might need personalized counseling for FP.

Controlling Nutritional Status (CONUT) Score is useful for the nutritional screening. We aimed to explore whether the CONUT score may predict a 3-month functional outcome in hemorrhagic stroke (AHS). Totally, 349 patients with incident AHS were consecutively recruited, and their malnutrition risks were determined using a high CONUT score of ≥ 2. Poor functional outcomes were defined as the modified Rankin Scale (mRS) score of ≥ 3 at 3 months. A total of 328 patients (mean age, 60.4 ± 12.83 years; 66.8% male) were included, 172 (52.40%) patients at malnutrition risk and 104 (31.7%) patients with a poor prognosis. High-CONUT patients had lower total lymphocyte counts and total cholesterol levels than low-CONUT patients (p &lt; 0.001 and p = 0.012). At 3-month post discharge, patients with malnutrition risk had higher hospitalization costs (p = 0.021), lower Barthel Index (p = 0.001), and more infectious complications (p = 0.002) than those without, and there was a greater risk for poor functional outcomes in the high-CONUT compared with the low-CONUT patients at admission (adjusted odds ratio: 2.32, 95% confidence interval: 1.28-4.17). High-CONUT scores predict a 3-month poor prognosis in AHS, which may help identify the AHS patients who need additional nutritional managements.

Interpolation is procedure that depends on spatial and/or statistical properties of analysed variable(s). It is special challenging task for data that included low number of samples, like dataset with less than 20 data. This problem is especially emphasized in the subsurface geological mapping, i.e. in the cases where data are taken solely from wells. Successful solutions of such mapping problems ask for knowledge about interpolation methods designed primarily for small datasets and dataset itself. Here are compared two methods, namely Inverse Distance Weighting and Modified Shepard’s Method, applied for three variables (porosity, permeability, thickness) measured in the Neogene sandstone hydrocarbon reservoirs (Northern Croatia). The results showed that pure cross-validation is not enough condition for appropriate map selection, but also geometrical features need to be considered, for datasets with less than 20 points.

In this paper, we investigate the Hawking radiation process by using the quantum tunneling phenomenon of massive spin-1 (W-bosons) and spin-0 particles from (2+1) dimensional Black Hoke with quintessential and magnetic field. For this purpose, using Hamilton-Jacobi ansatz, we apply the WKB approximation to the field equations of massive charged vector particles. We get the required tunneling rate of radiated particles and obtain their corresponding Hawking temperature $T_h$. In order to study the quantum gravity effects, we utilize the generalized Proca and Klein-Gordan equations incorporating the generalized uncertainty principle (GUP) and recover the accompanying quantum corrected temperature $T'_{h}$.

Background: Post-operative pain and swelling are frequently observed after sinus lift procedures. The aim of the present study was a clinical evaluation of swelling and pain of two sinus lift different flaps technique measured through visual analogue scale (VAS), verbal rating scale (VRS) and infrared thermal imaging (i.e., thermography). Methods: A randomized controlled trial was conducted in fifteen patients treated for a total of 30 sinus randomly allotted into two groups. In patients of Group I, a triangular flap was performed, while in Group II modified triangular flap without anterior release was performed. Postoperative pain was scored by VAS and inflammation was recorded by VRS at 2, 4, 6 and 14 days. The facial temperature was recorded before and after sinus augmentation, at 2, 4, 6 day intervals for the first week and at 14 day, to check the course of healing. Results: In group I the pain intensity was recorded at 2 days after the surgery with a score of 38.67 ± 6.4 mm. Swelling was higher at 2 and 4 day, and it was absent at day 6. Facial temperature difference before and after the procedure was 3 (4.737 °C ± 0.37). In Group II the pain was lower than in Group I (p < 0,05). Swelling scored 2 on the first and second day, and it was reduced at day 4. After the second day the difference of temperature reduced significantly compared to day of surgery (0.77 °C), at 2 and 4 days no difference was registered. Conclusion: In conclusion based on the outcome of the present study, modified triangular flap can be used with success in sinus augmentation procedures and is to be preferred to trapezoidal flap.

In this paper, we define the cohomology of a modified $\lambda$-differential left-symmetric algebra with coefficients in a suitable representation. We also introduce the notion of modified $\lambda$-differential left-symmetric 2-algebra. We classify linear deformations and abelian extensions of modified $\lambda$-differential left-symmetric algebras using the second cohomology group and classify skeletal modified $\lambda$-differential left-symmetric 2-algebra using the third cohomology group as our propose cohomology applications. Moreover, we prove that strict modified $\lambda$-differential left-symmetric 2-algebras are equivalent to crossed modules of modified $\lambda$-differential left-symmetric algebras.

In this study, we successfully synthesized a novel branched polyamide 6 with ε-caprolactam(CPL) and α-Amino-ε-caprolactam(ACL) through hydrolytic ring-open co-polymerization. The NMR characterization and rheological test result proved the existence of branched chain structure additionally. The branched chain structure caused a remarkable enhancement in the rheological properties. The met index(MFR),zero shear rate viscosity and storage modulus at low frequency region had a remarkable increase.The shear thinning phenomenon became more obvious. The thermal properties test determined by differential scanning calorimetry(DSC) showed that the melting point and crystallinity of co-polymers decreased with the increase of ACL addition.However, the crystal structure of the samples remained unchanged. The appropriate addition amount of ACL can improve the tensile mechanical properties of the co-polymers. When the amount of ACL was 1%, the tensile strength and fracture elongation rate of the co-polymers had the most significant increase.

If visible matter alone is present in the Universe, General Relativity (GR) and its Newtonian weak field limit cannot explain several pieces of evidence, from the largest to the smallest scales. The most investigated solution is the cosmological model ΛCDM, where GR is valid and two dark components are introduced, dark energy and dark matter, to explain the ∼70% and ∼25% of the mass-energy budget of the Universe, respectively. An alternative approach is provided by modified gravity theories, where a departure of the gravity law from ΛCDM is assumed and no dark components are included. This work presents refracted gravity (RG), a modified theory of gravity formulated in a classical way where the presence of DM is mimicked by a gravitational permittivity ϵ(ρ) monotonically increasing with the local mass density ρ, which causes the field lines to be refracted in small density environments. Specifically, the flatter the system the stronger the refraction effect and, thus, the larger the mass discrepancy if interpreted in Newtonian gravity. RG presented several encouraging results in modelling the dynamics of disk and elliptical galaxies and the temperature profiles of the hot X-ray emitting gas in galaxy clusters and a covariant extension of the theory seems to be promising.

In this work, a ferrocene-containing gallic acid derivative modified carbon nanotubes paste electrode (Gal-Fc-CNT) obtained by simple mechanical mixing was studied for fast simultaneous voltammetric detection of doxorubicin (DOX), capecitabine (CPB) and cyclophosphamide (CPP) as cytostatic index by cumulative signal and selective detection of DOX. The electrochemical behaviors of individual and simultaneous DOX, CPB and CPP studied by cyclic voltammetry (CV) on Gal-Fc-CNT electrode at various pHs and potential ranges allowed the development of simple simultaneous detection method as cytostatic index at pH of 12 using square-wave voltammetry technique operated at modulation amplitude of 100 mV, step potential of 4 mV, frequency of 25 Hz and 100 mV·s−1 potential scan rate that allowed better performance than reported electrodes. Faster and selective detection of DOX with the lowest limit of detection of 75 ng⸱L-1 was achieved using square-wave voltammetry technique operated at modulation amplitude of 100 mV, step potential of 4 mV, frequency of 50 Hz and 200 mV·s−1 potential scan rate. The good results obtained for real tap water assessment indicated the utility of Gal-Fc-CNT paste electrode for practical applications (water samples, pharmaceutical formulations).

This paper presents a Modified Gate Diffusion Input (MGDI) design with four inputs for Quantum-dot Cellular Automata (QCA) technology. QCA is a promising nanotechnology that offers benefits such as low power consumption, and high density, making it a potential alternative to CMOS technology. The proposed planar cell design has advantages over previous designs, including a 19% reduction in the number of cells, a 29% reduction in total energy consumption, and a 44% reduction in average energy loss at the same occupancy level. The proposed block is capable of implementing 21 basic combinational functions and various sequential functions. The simulation of functions in 18nm technology and energy consumption calculation indicates that the resulting circuits have improvements of 41%, 27%, 27%, and 20% compared to multiplexers, comparators, four-bit parity circuits, and single-bit memory, respectively. Additionally, the number of cells in the proposed circuits has improved by 10%, 7%, 22%, and 19%, respectively.

The feasibility of using zeolites, synthesized from components found in municipal solid waste fly ash (MSW-FA), as sorbents for the recovery of nutrients (nitrate and phosphate) and heavy metals is critically assessed in this review. The inherent drawbacks of utilising a highly contaminated, variable, and relatively Al- and Si-dilute source such as MSW-FA to synthesize zeolites are discussed, and different methods to extract and decontaminate zeolite precursor materials from MSW-FA are considered. Ways to synthesize tailored zeolites and how their properties as well as the operational conditions impact the adsorption of cations such as ammonium and heavy metals are summarized. The use of surface-modified zeolites to adsorb nitrate and phosphate is also reviewed. And subsequently, approaches to utilise directly or recover for reuse the adsorbed compounds are considered, discussing potential challenges and mitigating measures related to leaching of unwanted compounds from the zeolites. Moreover, the possibility to regenerate the adsorption capacity of the zeolites for multiple adsorption cycles is considered. In the final chapter of the review a more general discussion of the main challenges and existing research gaps is provided, giving directions for recommended studies.

The global environmental impact of plastic waste is significant, with only 9% being recycled, causing pollution and harming the environment and humans. Due to increased traffic, limited funding, and dwindling natural resources, Jordan's road network is deteriorating rapidly. Pavement performance can be improved through high-quality materials and sustainable construction practices. The research investigates using Polyethylene Terephthalate as a polymer additive in asphalt mixtures to enhance their properties. Basalt and limestone mixtures were applied to asphalt mixtures. The optimal binder content for the control mixture was 4.8% for basalt and 4.93% for limestone. When modified with 10% PET, the basalt mixture showed slightly better stability than the control mix, while higher PET proportions led to reduced strength. PET-modified mixtures consistently displayed higher flows and bulk densities, with a more pronounced impact on the basalt mixture. PET increased the air-void ratio in basalt but had minimal effect on VMA. PET offers economic and environmental advantages, saving 8.4% of the original bitumen cost. As a result, limestone mixture properties, which are inferior to basalt mixture properties, improved significantly compared to basalt mixture properties. PET has the potential to create sustainable and high-performing asphalt mixtures, providing valuable insights for road construction and environmental management.

The presence of dark matter, though well established by indirect evidence is yet to be observed directly. Various dark matter detection experiments running for several years have yielded no positive results so far. In view of these negative results, we had earlier proposed alternate models by postulating a minimum gravitational field strength (minimum curvature) and also a minimum acceleration. These postulates led to the modified Newtonian dynamics and modified Newtonian gravity (MONG). The observed flat rotation curves of galaxies had also been accounted for through these postulates. Here we extend these postulates to galaxy clusters and model the dynamical velocity-distance curves for such large-scale structures. The velocity-distance curve of the Virgo cluster, plotted with this model is found to be in accordance with that observed.

Black hole's quasinormal frequencies are basically the complex numbers which provide information about the relaxation of perturbations and depend on the characteristics of the spacetime and types of perturbations. In this paper, we evaluate the quasinormal modes of Hayward black hole in Einstein Gauss-Bonnet gravity, Hayward black hole in anti-de Sitter space (AdS) spacetime, and 4-dimensional black hole in Einstein-Lovelock gravity. By utilizing the WKB resonance technique, we examine the quasinormal modes frequencies $\omega$ by shifting the charge parameter $Q$ (it is also identified with the cosmological constant), circular harmonic index $l$, and mass of scalar field $m$. We also study the relaxation rate for those black holes and find out that the relaxation rate increases with increasing values of $Q$. We observe that real and imaginary components of the quasinormal modes are not linear functions as similar to Reisnner Nordstr\"{o}m-AdS. For large values of charge, quasinormal ringing becomes slower to settle down to thermal equilibrium and hence the frequency of the oscillation becomes smaller.

Abstract: This paper is focusing on the stabilisation of soil using jute fibre as soil stabilizer. Stabilisation is the process of modifying the properties of a soil to improve its engineering performance and used it for a variety of engineering works. This study examines the potential of soil stabilization with jute fibre when it is cut into roughly 30mm lengths as stabilizer. The varying percentages like 0.5%, 1%, 1.5 and 2% of pieces of jute fibre were used and mixed it with soil. The laboratory tests such as California Bearing Ratio (CBR) test, modified compaction tests and direct shear strength tests have been conducted to observe the change in engineering properties of soil. On the basis of the experiments performed, it can be concluded that the stabilization of soil using 30mm pieces of jute as stabilizer improves the strength characteristics of the soil so that it becomes usable as one of the reinforcing material for the construction of roadways, parking areas, site development projects, airports and many other situations where sub-soils are not suitable for construction.

Objective: To assess the functionality of the affected upper limb in children diagnosed with hemiplegia aged between 4 and 8 years after applying low-intensity modified constraint-induced movement therapy(mCIMT). Methods: Prospective case series study. A mCIMT protocol was applied for five weeks, with two hours of containment per day. The study variables were: quality of movement of the upper limb, spontaneous use, participation of the affected upper limb in activities of daily living, dynamic joint position, grasp-release action, grasp strength, supination and extension elbow movements. Four measurements were performed, using the QUEST scale, the SHUEE Evaluation, a hand dynamometer and a goniometer. Results: The sample was composed of 8 children with moderate manual ability. Statistically significant differences were detected in all the studied variables (p&lt;0.05). The greatest increase occurred in spontaneous use from assessment 1-4 (p = 0.01), reaching 88.87% active participation in bimanual tasks. The quality of movement of the upper limb obtained a significant value due to the increase in dissociated movements and grasp (p = 0.01). Conclusion: A low dose (50 hours) of mCIMT increased the functionality of children diagnosed with congenital hemiplegia between 4 and 8 years of age with moderate manual ability.

Although sarcopenia is characterized by a loss of muscle strength and skeletal muscle mass, few studies have evaluated the effect of muscle strength on hepatocellular carcinoma (HCC) patients. We separately evaluated the impact of sarcopenia-related factors (grip strength [GS] and the skeletal muscle index [SMI]) on the survival among lenvatinib-treated unresectable HCC (u-HCC) patients. This single-center cohort study was conducted at a university hospital. The study population included 63 lenvatinib-treated u-HCC patients managed between April 2018 and April 2020. A decreased GS and decreased SMI were found in 21 (33.3%) and 22 (34.9%) patients, respectively. The overall survival (OS) of the normal GS group was significantly higher than that of the decreased GS group, while that of the normal and decreased SMI groups did not differ markedly. There were no significant differences in the progression-free survival between the normal GS and decreased GS groups or the normal SMI and decreased SMI groups. A multivariate Cox proportional hazards model showed that ALBI2b (hazard ratio [HR] 4.39) and a decreased GS (HR 3.55) were independently associated with an increased risk of poor prognosis. In addition to the hepatic functional reserve, a decreased GS was a poor prognostic factor in lenvatinib-treated u-HCC patients.

By using Modified simple equation method, we study the Cahn Allen equation which arises in many scientific applications such as mathematical biology, quantum mechanics and plasma physics. As a result, the existence of solitary wave solutions of the Cahn Allen equation is obtained. Exact explicit solutions interms of hyperbolic solutions of the associated Cahn Allen equation are characterized with some free parameters. Finally, the variety of structure and graphical representation make the dynamics of the equations visible and provides the mathematical foundation in mathematical biology, quantum mechanics and plasma physics.

The objectives of this study are threefold. First, we evaluate the applicability of the information–motivation–behavioral skills (IMB) model for predicting organic food purchase intention (OFPI) in adults with chronic conditions. Second, we examine the indirect effects of organic food knowledge, attitudes toward organic food purchase, and subjective norms on OFPI through self-efficacy. Third, we examine whether these indirect effects are moderated by gender and educational attainment. Data were collected from Indian adults with chronic conditions using a self-administered questionnaire. The results show significant indirect effects of organic food knowledge, attitude toward organic food purchase, and subjective norm on OFPI through self-efficacy. Moreover, the mediating effect of knowledge was moderated by gender and education attainment, with the effect being stronger for females and among individuals with a lower level of education. Organic food marketers, social marketers, and public health agencies promoting organic food consumption to people with chronic conditions should aim to increase their confidence in comprehending organic food. This study contributes to the literature by assessing the applicability of Fisher and Fisher’s (1992) IMB model in understanding behavioral intention toward organic food.

Background: Only few studies have studied the link between risk perception and sleep in the context of the COVID-19 pandemic. This study investigates the effect of two distinct risk appraisals—risk perception and perception of collective coordinated defense (PCCD) on Chinese adults’ sleep quality during the COVID-19 pandemic, and tested COVID-19-related fear and rumination as potential mediators of the relationships. Methods: Data were collected using a self-report online questionnaire from a sample of 224 Chinese adults during the fourth wave of the COVID-19 pandemic in Hong Kong. Results: COVID-19 risk perception and PCCD were related to poor sleep quality. Mediation analysis showed that both fear and rumination mediated the relationship between risk perception and sleep quality, whereas only fear mediated the relationship between PCCD and sleep quality. The model showed an excellent fit to the data and accounted for 44% of the variance in sleep quality in Chinese adults. Conclusions: This study demonstrates the distinct perceptual processes—risk appraisals in particular—contributed to poor sleep quality in Chinese adults during the COVID-19 public emergencies. These findings would be helpful for policy makers to address the sleep problems induced by psychological consequences of the pandemic.

This article addresses the challenge of simulating rainstorm waterlogging in urban-scale areas where reliable drainage pipe network data is often lacking. Despite existing methods attempting to tackle this issue, there remains a gap in effectiveness. We present a novel approach, the Modified Equivalent Infiltration (MEI) method, building upon the foundation of the Equivalent Infiltration (EI) method. The study focuses on the outer ring area of Shanghai, utilizing data from the "In-Fa" typhoon period for simulation and comparison. Our findings reveal that the MEI method, requiring the same data inputs as the EI method, surpasses its predecessor in both principle and simulation results. Additionally, the MEI method demonstrates robustness in handling rainstorm waterlogging scenarios.

Generalized distributions have been studied a lot recently because of their flexibility and relia-bility in modeling lifetime data. The two-parameter exponentially-modified logistic distribution is a new flexible modified distribution that was introduced recently. It is regarded as a strong competitor for widely used classical symmetrical and non-symmetrical distributions such as normal, logistic, lognormal, and log-logistic. In this study, the unknown parameters of the dis-tribution are estimated using the maximum likelihood method. The Grey Wolf Optimization al-gorithm, which is a new meta-heuristic algorithm, is applied in order to solve the nonlinear like-lihood equations of the study model. The performance of the Grey Wolf Optimization method is compared to that of the other meta-heuristic algorithms used in this study, which include the Whale Optimization Algorithm, the Sine Cosine Algorithm, and the Particle Swarm Optimiza-tion Algorithm. The efficiencies of maximum likelihood estimates for all algorithms are com-pared via an extensive Monte-Carlo simulation study. The likelihood estimates for the location α and scale β parameters of the exponentially-modified logistic distribution developed with the Grey Wolf Optimization algorithm are the most efficient among others, according to simulation findings. Four real datasets are analyzed to show the flexibility of this distribution.

Optimum postharvest storage conditions increase the shelf life and postharvest quality of horticultural crops. The effects of forced-air precooling (FAP) and modified atmosphere packaging (MAP) on shelf life, physicochemical quality, and health-promoting properties of bell pepper (Capsicum annuum L. cv. Nagano) harvested at 90% and 50% coloring stages in May and July respectively, stored at 11℃, 95% relative humidity were assessed. Fruits were treated with FAP + 30 μm polyethylene liner (FOLO), FAP (FOLX), 30 μm polyethylene liner (FXLO), and control (FXLX). The quality attributes, viz. weight loss, firmness, color, SSC, soluble sugars, TPC, TFC, DPPH, and ABTS were evaluated. FOLO maintained sensory quality (weight loss, firmness, and color), physicochemical (soluble solids content and soluble sugars), and health-promoting properties compared to other treatments during storage. The investigated parameters differed significantly (p &lt; 0.05) among treatments except soluble sugars. The 50% coloring fruits had a huge variation between treatments than 90% coloring. The results revealed more TPC and antioxidant capacity in 50% than in 90% coloring fruits. The study highlights the need to consider the ideal fruit coloring stage at harvest under the effect of FAP and MAP treatments in preserving bell pepper's postharvest quality and shelf life.

This research paper is about to obtain new soliton solutions to the M-fractional (1+1)-dimensional nonlinear Westervelt model by utilizing $\exp_a$ function and modified simplest equation techniques. The gained solutions involving dark, bright, periodic, dark-bright and other solitons. These results have many applications in wave propagation of sound waves, high amplitude in medical imaging and therapy. Achieved results are verified by Mathematica tool and the effect of M-fractional derivative on the solutions is explained through 2-Dimensional, 3-Dimensional and contour plots. At the end, these techniques are simple, fruitful and effective to deal with nonlinear FPDEs.

The selectin of a demand forecasting method is critical for companies aiming to avoid manufacturing overproduction or shortages in pursuit of sustainable development. Various qualitative and quantitative criteria with different weights must be considered during the evaluation of a forecasting method. The qualitative criteria and criteria weights are usually assessed in linguistic terms. Aggregating these various criteria and linguistic weights for evaluating and selecting demand forecasting methods in sustainable manufacturing is a major challenge. This paper proposes an extension of fuzzy Elimination and Choice Translating Reality (ELECTRE) I to resolve this problem. In the proposed method, fuzzy weighted ratings are defuzzified with the signed distance to develop a crisp ELECTRE I model. Moreover, an extension to ELECTRE I is developed by suggesting an extended modified discordance matrix and a closeness coefficient for ranking alternatives. The proposed extension can overcome the problem of information loss which can lead to incorrect ranking result when using the Hadamard product to combine concordance and modified discordance matrices. A comparison is conducted to show the advantage of the proposed extension. Finally, a numerical example is used to demonstrate the feasibility of the proposed method; furthermore, a numerical comparison is made to display the advantage of the proposed method.

Rationale. A biomaterial is proposed for closing extensive bone defects in the maxillofacial region. The composition of the biomaterial includes high molecular weight chitosan, chondroitin sulfate, hyaluronate, heparin, alginate and inorganic nanostructured hydroxyapatite. The purpose of the study is to demonstrate morphological and histological early signs of reconstruction of a bone cavity of a critical size. Materials and methods. The studies were carried out on 84 white female rats weighing 200 g. The control group of animals consisted of 44 individuals, the study group - 40. In all animals, three-walled bone defects 0.5 cm in size were applied subperiosteally in the region of the angle of the lower jaw and filled in the experimental group with a gel mass of chitosan -alginate-hydroxyapatite (CH-SA-HA). In control animals, the bone cavities were filled with an auto-blood clot. The follow-up periods were 3.5.7 days, 2.3.4.6.8 and 10 weeks. Results. The chitosan construct after implantation actively replaced defects early with the formation of a full-fledged new bone tissue compared to control animals. Morphological analysis of the walls of the bone defect on the 7th day showed signs of the formation of spongy bone tissue, after two weeks - a pronounced increase in bone volume (P<0.01), after 6 weeks after surgery, the closure of the defect was 70-80%, after 8 weeks - 100% without disturbing bone morphology with a high degree of mineralization. Conclusion The use of modified chitosan after filling eliminates bone defects of critical size in the maxillofacial region, reveals early signs of bone neoformation, and serves as a promising material in reconstructive dentistry.

A locally-rotationally-symmetric Bianchi-I model filled with strange quark matter (SQM) is explored in f(R, T) gravity. We take f(R, T) = R + 2 f(T) = R + 2λT, where R is the Ricci scalar, T is the trace of energy-momentum tensor and λ is an arbitrary constant. Exact solutions are obtained by assuming that the expansion scalar is proportional to the shear scalar. This yields a constant value for the deceleration parameter, q = 2, which corresponds to the decelerated phase of the universe. The model is found to be physically viable for λ < −1. SQM during early evolution mimics ultra-relativistic radiation whereas at late times, it behaves as dust, quintessence or even the cosmological constant depending on the value of λ. The effective matter acts as a stiff fluid irrespective of the matter content and of the f(R, T) terms. The model is shear free at late times but remains anisotropic throughout the evolution. In the absence of the f(R, T) terms, SQM accelerates the universe. In the specific case when SQM vanishes at late times, the effect of f(R, T) is to accelerate the universe. The model admits the possibility that SQM could be an alternative to dark energy.

The many problems faced by the theory of general relativity (GR) have always motivated us to explore the modified theory of GR. Considering the importance of studying the black hole (BH) entropy and its correction in gravity physics, we study the correction of thermodynamic entropy for a kind of spherically symmetric black holes under the generalized Brans-Dicke (GBD) theory of modified gravity. We derive and calculate the entropy and heat capacity. It is found that when the value of event horizon radius~$r_+$~is small, the effect of the entropy correction term on the entropy is very obvious, while for larger values~$r_+$~, the contribution of the correction term on entropy can be almost ignored. In addition, we can observe that as the radius of the event horizon increases, the heat capacity of BH in GBD theory will change from a negative value to a positive value, indicating that there is a phase transition in black holes. Given that studying the structure of geodesic lines is important for exploring the physical characteristics of a strong gravitational field, we also investigate the stability of the geodesic motion of particles in static spherically symmetric BHs within the framework of GBD theory. Concretely, we analyzes the dependence of the innermost stable circular orbit on model parameters. Also, the geodesic deviation equation is also applied to investigate the stable circular orbit of particles in GBD theory. The conditions for the stability of BH solution and the limited range of radial coordinates required to achieve stable circular orbit motion are given. Finally, we show the locations of stable circular orbits, and obtain the angular velocity, the specific energy and angular momentum of the particles which move in circular orbits.

Biocontainment techniques for genetically modified yeasts (GMYs) are pivotal due to the importance of these organisms for biotechnological processes and also due to the design of new yeast strains by using synthetic biology tools and technologies. Due to the large genetic modifications that many yeast strains display, it is highly desirable to avoid the leakage of GMY cells into natural environments and, consequently, the spread of synthetic genes and circuits by horizontal or vertical gene transfer mechanisms within the microorganisms. Moreover, it is also desirable to avoid that patented yeast gene technologies spread outside the production facility. In this review, it was evaluated the different biocontainment technologies currently available for GMYs. Interestingly, uniplex-type biocontainment approaches (UTBAs), which relies on nutrient auxotrophies induced by gene mutation or deletion, or the expression of simple kill switches apparatus, are still the major biocontainment approaches still in use with GMY. While bacteria like Escherichia coli account for advanced biocontainment technologies based on synthetic biology and multiplex-type biocontainment approaches (MTBAs), GMYs are distant from this scenario due to many reasons. Thus, a comparison of different UTBAs and MTBAs applied for GMY and genetically engineered microorganisms (GEMs) was made, indicating the major advances of biocontainment techniques for GMYs.

In this paper, we construct the degenerate poly-Fubini polynomials, called the type 2 degenerate poly-Fubini polynomials, by using the modified degenerate polyexponential function and derive several properties on the degenerate poly-Fubini polynomials and numbers. In the last section, we introduce type 2 degenerate unipoly- Fubini polynomials attached to an arithmetic function, by using the modified degenerate polyexponential function and investigate some identities for those polynomials. Furthermore, we give some new explicit expressions and identities of degenerate unipoly polynomials related to special numbers and polynomials.

A 9,10-phenanthrenequinone (PQ) was electrochemically polymerized on a graphite rod electrode using potential cycling. The electrode modified by poly-9,10-phenanthrenequinone (poly-PQ) was studied by means of cyclic voltammetry, electrochemical impedance spectroscopy, atomic force microscopy and scanning electron microscopy. The poly-PQ shows variations in growth pattern depending on the number of potential cycles for the initiation of polymerization. Formed poly-PQ layer demonstrates good electric conductivity, great electrochemical capacitance and unique oxidation/reduction properties, which are suitable for broad technological applications, including applicability in biosensors, supercapacitors, and in some other electrochemical systems.

The paper presents an adaptation of numerical solution of first order linear differential equation in fuzzy environment. The numerical method is re-established and studied with fuzzy concept to estimate its uncertain parameters whose values are not precisely known. Demonstrations of fuzzy solutions of the governing methods are carried out by the approaches, namely Modified Runge Kutta method and Runge Kutta Merson method. The results are compared with the exact solution which is found using generalized Hukuhara derivative (gH-derivative) concepts. Additionally, different illustrative examples and an application in industry of the methods are also undertaken with the useful table and graph to show the usefulness for attained to the proposed approaches.

In this paper I will address Dr. Sonne’s questions about will, agency, choice, consciousness, relevant brain regions, impacts of disorders and their therapeutics, and I will do this by referring to my theory, Dual-brain Psychology, which posits that within most of us there exist two mental agencies with different experiences, wills, choices, and behaviors. Each of these agencies is associated as a trait with one brain hemisphere (either left or right) and its composite regions. One of these agencies is more adversely affected by past traumas and is more immature and more symptomatic while the other is more mature and healthier. The theory has extensive experimental support through 17 peer-reviewed publications with clinical and non-clinical research. I will discuss how this theory relates to the questions that Dr. Sonne presented and will discuss also my published theory on the physical nature of subjective experience and its relation to the brain and how that theory interacts with DBP, and how the 2 theories relate to subjective experience, will, behavior, psychopathology and its treatment.

Technological advances in game-mediated robotics provide an opportunity to engage children with cerebral palsy (CP) and other neuromotor disabilities in more frequent and intensive therapy by making personalized, programmed interventions available 24/7 in children’s homes. Though shown to be clinically effective and feasible to produce, little is known of the subjective factors impacting acceptance of what we term assistive/rehabilitative (A/R) gamebots by their target populations. This research describes the conceptualization phase of an effort to develop a valid and reliable instrument to guide the design of A/R gamebots. We conducted in-depth interviews with 8 children with CP and their families who had trialed an exemplar A/R gamebot, PedBotHome, for 28 days in their homes. The goal was to understand how existing theories and instruments were either appropriate or inappropriate for measuring the subjective experience of A/R gamebots. Key findings were the importance of differentiating the use case of therapy from that of assistance in rehabilitative technology assessment, the need to incorporate the differing perspectives of children with CP and those of their parents into A/R gamebot evaluation, and the potential conflict between the goals of preserving the quality of the experience of game play for the child while also optimizing the intensity and duration of therapy provided during play.

Modified mRNAs (modRNAs) are an emerging delivery method for gene therapy. In particular, the modRNA-based COVID-19 vaccines have proven that modRNA is a safe and effective therapeutic tool. Moreover, modRNA has the potential to treat various human diseases including cardiac dysfunction. Acute myocardial infarction (MI) is a major cardiac disorder that currently lacks curative treatment options. MI is commonly accompanied by fibrosis and impaired cardiac function. Our group previously demonstrated that the matricellular protein CCN5 inhibits cardiac fibrosis (CF) and improves cardiac dysfunction. However, it remains elusive whether the early intervention of CF under stress conditions is beneficial or more detrimental due to potential adverse effects such as left ventricular (LV) rupture. To obtain acute CCN5 expression, we used modRNA-mediated gene transfer in a mouse MI model. To evaluate CCN5 activity, we established two independent experimental schemes: 1) preventive intervention and 2) therapeutic intervention. Cardiac function and structural changes were measured by echocardiography and magnetic resonance imaging. Finally, fibrosis and the underlying molecular pathway were analyzed by western blotting, quantitative real-time polymerase chain reaction, and immunohistochemistry. The modRNA-CCN5 gene transfer successfully ameliorated CF and enhanced cardiac function in both preventive and therapeutic interventions without LV rupture or any adverse cardiac remodeling. Conclusively, early intervention in CF by modRNA-CCN5 gene transfer is an efficient and safe therapeutic modality for treating MI-induced heart failure without adverse structural remodeling.

In the realm of construction industry, the management of claims constitutes a pervasive and multifaceted issue, with potential repercussions extending to project delays, cost overruns, work suspensions, and, in extreme cases, project termination. This challenge is a significant and unavoidable hurdle due to the unique features of construction projects, which are complex, involve many stakeholders and come with inherent risks. To address this complex issue, it becomes imperative to undertake a comprehensive appraisal of the claims management procedures employed within the industry, culminating in the presentation of findings within a risk-based framework. The overarching objective of this endeavour is threefold: firstly, to discern the pivotal attributes that affect each category of construction claims; secondly, to establish a coherent decision-making paradigm for the effective administration of such claims; and finally, to provide data that can be harnessed to either address concerns related to claims or enhance the effectiveness of the claims administration process. Keeping this in mind, this study serves to evaluate the factors associated with claim management gathered from a wide overview of literature, encompassing a range of construction projects, varying in terms of types, sizes/capacities and contractual arrangements. Hence, it advanced a refined method within the domain of fuzzy group decision-making, denoted as the Modified Fuzzy Group Decision-Making Approach (FGDMA) in addition to extensive statistical analysis using SPSS.V.25 software. They were applied to assess, analyze and prioritize claim about 108 claim management factors based on the responses obtained from the comprehensive questionnaire survey involving 104 industry professionals. This multi-faceted approach, which combines the insights from previous publications, along with the collective experience of the surveyed professionals with the analytical capabilities of the FGDMA- Statically Factor Analysis, reinforces the robustness and practical applicability of proposed methodology within the context of construction claims management.

Semenov-Tian-Shansky has introduced the modified classical Yang-Baxter equation, which is called the modified $r$-matrix. Relevant studies have been extensive in recent times. This paper is devoted to study cohomology theory of modified Rota-Baxter pre-Lie algebras and its applications. First we introduce the concept and representations of modified Rota-Baxter pre-Lie algebras. We then develop the cohomology of modified Rota-Baxter pre-Lie algebras with coefficients in a suitable representation. As applications, we consider the infinitesimal deformations, abelian extensions and skeletal modified Rota-Baxter pre-Lie 2-algebra in terms of lower degree cohomology groups.

Plants significantly shape root-associated microbiota, making rhizosphere microbes useful environmental indicator organisms for safety assessment. Here, we report the pyrosequencing of the bacterial 16S ribosomal RNA in rhizosphere soil samples collected from transgenic cry1Ab/cry1Ac Bt rice Huahui No. 1 (GM crop) and its parental counterpart, Minghui63. We identified a total of 2,579 quantifiable bacterial operational taxonomic units (OTUs). Many treatment-enriched microbial OTUs were identified, including 14 NonGM-enriched OTUs and 10 GM-enriched OTUs. The rhizosphere microbiota communities were influenced more strongly by growth in the field than by rice varieties. Furthermore, Huahui No. 1 transgenic Bt rice had a greater impact on the rhizosphere bacterial communities than Minghui63. Early developmental stages of the transgenic Bt rice had a significant impact on many Bacillaceae communities. While soil chemical properties were not significantly altered by the presence of transgenic Bt rice, we found peak expression level of Bt proteins during the seedling stage, which may be an intriguing factor for bacterial diversity variations. Based on these findings, we conclude that transgenic Bt rice has a significant impact on root-associated bacteria. This information may be leveraged in future environmental safety assessments of transgenic Bt rice varieties.

Background and Objectives: This study aimed to evaluate the effects of subtalar joint axis-based balance exercises on the anterior talofibular ligament (ATFL) thickness, ankle strength, and ankle stability after an arthroscopic modified Broström operation (AMBO) for chronic ankle instability (CAI). Materials and Methods: The study included 47 patients diagnosed with CAI who underwent AMBO and were randomly divided into three groups: control (n=11), general balance exercise (n=17), and subtalar joint axis balance exercise (n=19), regardless of the affected area. Participants in the exercise rehabilitation group performed exercises for 60 min twice a week for 6 weeks, starting 6 weeks after AMBO. ATFL thickness, ankle strength, and ankle dynamic stability were measured using musculoskeletal ultrasonography, Biodex, and Y-balance test, respectively, before and after treatment. Results: Compared with the remaining groups, the subtalar joint axis balance exercise group had reduced ATFL thickness (p = 0.000), improved ankle strength for eversion (p = 0.000) and inversion (p = 0.000), and enhanced ankle stability (p = 0.000). Conclusions: The study results suggests that subtalar joint axis-based balance exercises may contribute to the early recovery of the ankle joint after AMBO.

A unique method for synthesizing a surface modifier for metallic hydrogen permeable mem-branes based on non-classic bimetallic pentagonally structured Pd-Pt nanoparticles has been de-veloped. It was found that nanoparticles had unique hollow structure. This significantly reduces the cost of their production due to economical use of metal. According to the results of electro-chemical studies, synthesized bimetallic Pd-Pt/Pd-Ag modifier showed excellent catalytic activi-ty (up to 60.72 mA cm–2), long-term stability and resistance to COads poisoning in alkaline oxida-tion reaction of methanol. The membrane with pentagonally structured Pd-Pt/Pd-Ag modifier showed the highest hydrogen permeation flux density up to 27.3 mmol s–1 m–2. Obtained hy-drogen flux density were 2 times higher than that for membranes with classic Pdblack/Pd-Ag modifier and an order of magnitude higher than that for unmodified membrane. Since the rate of transcrystalline hydrogen transfer through a membrane increased, while the speed of transfer through defects remained unchanged, a one and a half times rise in selectivity of the developed Pd-Pt/Pd-Ag membranes was recorded and it amounted to 3514. Achieved results are due to both the synergistic effect of the combination of Pd and Pt metals in the modifier composition and the large number of available catalytically active centers, which are present as a result of non-classic morphology with high-index facets. The specific faceting, defect structure and unusual properties provide great opportunities for the application of nanoparticles in the areas of membrane reac-tors, electrocatalysis, petrochemical and hydrogen industries.

A unified electro-gravity (UEG) theory, which has been successfully used for modeling an elementary particle, is applied in this paper to model gravitation in spiral galaxies. The new UEG model would explain the "flat rotation curves'' commonly observed in the spiral galaxies, without need for any hypothetical dark matter. The UEG theory is implemented in a somewhat different manner for a spiral galaxy, as compared to the simple application of the UEG theory to an elementary particle. This is because the spiral galaxy, unlike the elementary particle, is not spherically symmetric. The UEG constant $\gamma$, required in the new model to support the galaxies' flat rotation speeds, is estimated using measured data from a galaxy survey, as well as for a selected galaxy for illustration. The estimates are compared with the $\gamma$ derived from the UEG model of an elementary particle. The UEG model for the galaxy is shown to explain the empirical Tully-Fisher Relationship (TFR), is consistent with the Modified Newtonian Dynamics (MOND), and is also independently supported by measured trends of galaxy thickness with surface brightness and rotation speed. The UEG theory may similarly be extended to emulate the hypothetical dark matter in galaxy clusters as well as in cosmology.

The COVID-19 pandemic has underscored the importance of swift responses and the necessity of dependable technologies for vaccine development. Our team previously developed a fast cloning system for the modified vaccinia virus Ankara (MVA) vaccine platform. In this study, we report the construction and preclinical testing of a recombinant MVA vaccine obtained using this system. We obtained recombinant MVA expressing the unmodified full-length SARS-CoV-2 spike (S) protein containing the D614G amino acid substitution (MVA-Sdg) and a version expressing a modified S protein containing amino acid substitutions designed to stabilize the protein a in a pre-fusion conformation (MVA-Spf). S protein expressed by MVA-Sdg was found to be expressed and correctly processed and transported to the cell surface, where it efficiently produced cell-cell fusion. Version Spf, however, was not proteolytically processed and despite being transported to the plasma membrane, it failed to induce cell-cell fusion. We assessed both vaccine candidates in prime-boost regimens in the susceptible transgenic K18-human angiotensin converting enzyme 2 (K18-hACE2) mice and in golden Syrian hamsters. Robust immunity and protection from disease was induced with either vaccine in both animal models. Remarkably, the MVA-Spf vaccine candidate produced higher levels of antibodies, a stronger T cell response, and a higher degree of protection from challenge. In addition, the levels of SARS-CoV-2 in the brain of MVA-Spf inoculated mice was decreased to undetectable levels. Those results add to our current experience and range of vaccine vectors and technologies for developing a safe and effective COVID-19 vaccine

Background: Malnutrition in critically ill paitents is closely linked with clinical outcomes. During acute inflammatory states, nutrition cannot reverse the loss of body cell mass completely. Studies on nutritional screening and strategy considering metabolic changes not yet been conducted. We aimed to identify nutrition strategies using the modified Nutrition Risk in the Critically ill (mNUTIRC) score. Methods: Nutrition support data, laboratory nutrition indicators, and prognosis indices were prospectively collected on the 2nd and 7th day after admission. It is to identify the effect of changes on the metabolic status and critical target of nutrition intervention. To discriminate the high-risk group of malnutrition, receiver operating characteristic curves were plotted. Risk factors associated with 28 day-mortality were evaluated using multivariable Cox proportional hazards regression. Results: A total of 490 and 266 patients were analyzed on the 2nd and 7th day, respectively. Only the mNUTRIC score showed significant differences in nutritional risk stratification. The use of vasopressors, hypo-protein supply (< 1.0 g/kg/day), high mNUTRIC score and hypoalbuminemia (<2.5 mg/dl) in the recovery phase was strongly associated with 28-day mortality. Conclusions: The implementation of the mNUTRIC score and protein supply in the post-acute phase is critical to improve 28-day mortality in critically ill patients.

Archie model is the basis of calculating oil saturation, but there are some limitations when using this model to calculate oil saturation in water-flooded layer. The main reason is that the main parameters, such as rock resistivity and formation water resistivity, are constantly changing dynamic parameters in the underground with the influence of injected water. Considering that water-flooded layers changes with injection waters, influence factors of rock resistivity and formation water resistivity of primary parameters are analyzed. Considering the dynamic data of water cut is the most reactive underground fluid characteristics of real information, combined with dynamic and static, and the “double ratio” model of later development by the same sedimentary layer is established, which realizes the inversion of rock resistivity and formation water resistivity, then modified Archie model relating to water-flooded layers of the same sedimentary explaining formation. The explanation of actual data indicates that the “double ratio” model well considers the dynamic variation of production data, which makes the inversion of the flooded rock resistivity relatively accurate, besides, the modified Archie model can accurately calculate the oil saturation of water-flooded layers with a reasonable result, which offers scientific basis for the predicting of remaining oil distribution rules.

Pd-Pt catalysts supported on carbon preheated to 1600°C have been reinvestigated in CHFCl2 hydrodechlorination. An additionally adopted catalyst oxidation at 350-400°C produced an order of magnitude increase in the catalytic activity of Pd/C. This increase is not caused by changes in metal dispersion or possible decontamination of the Pd surface from superficial carbon, but rather by unlocking the active surface, originally inaccessible in metal particles tightly packed in the pores of carbon. Burning carbon from the pore walls attached to the metal changes the pore structure, providing easier access for the reactants to the entire palladium surface. As upon calcination the performance of the rest of the Pd-Pt/C catalysts changes less than for Pd/C, the relation between the turnover frequency and alloy composition does not confirm the Pd-Pt synergy invoked in our previous work. The use of even higher-preheated carbon (1800°C), completely free of micropores, results in a Pd/C catalyst that does not need to be oxidized to achieve high activity and excellent selectivity up to CH2F2 (>90%).

Magnetometric Resistivity(MMR) Method, which can use the power supply method of the traditional apparent resistivity method to measure the magnetic field. At present, the application research abroad is relatively extensive, but the domestic(China) research on the application of the MMR method is very few, and it is not even well-known. This paper is based on the MMR theoretical method under the point source DC condition, combined with the abnormal potential method and the modified Biot-Savart law, and using the three-dimensional numerical calculation method of the finite difference method to calculate the abnormal potential field, electric field, and magnetic field on the matlab2018a platform. Calculate, realize the multi-physics simulation in the electromagnetic field through Matlab platform programming, and verify the correctness of the algorithm by the spherical anomaly model with an analytical solution. Through the visual simulation of the three-dimensional data volume of the multi-physics field in the electromagnetic field, we can better understand the response mechanism of the electromagnetic field under DC conditions and grasp their three-dimensional spatial distribution rules. It is hoped that the research in this article can help the research of MMR Personnel better use this method for exploration.

Fractional differential mathematical model unfolding the dynamics of the COVID-19 pandemic in India is presented and explored in this paper. The purpose of this study is to estimate the future outbreak of disease and potential control strategies using mathematical models in India as a whole country as well as in some of the states of the country. This model is calibrated based on reported cases of infections over the month of April 2020 in India. We have used iterative fractional complex transform method to find approximate solutions of the model having modified Riemann Liouville fractional differential operator. We have also carried out a comparative analysis between actual and estimated cumulative cases graphically, moreover, most sensitive parameters for basic reproduction number$(R_0)$ are computed and their effect on transmission dynamics of COVID-19 pandemic is investigated in detail.

Daily rainfall data was collected for the arid district of Ananthapuramu, Andhra Pradesh state, India from 1981 to 2016 at the sub-district level and aggregated to monthly, annual and seasonal rainfall totals and the number of rainy days. The objective of this study is to evaluate the homogeneity, trend, and trend change points in the rainfall data. After quality checks and homogeneity analysis, a total of 27 rain gauge locations were considered for trend analysis. A serial correlation test was applied to all the time series to identify serially independent series. Non-Parametric Mann-Kendall test and Spearman’s rank correlation tests were applied to serially independent series. The magnitude of the trend was calculated using Sen’s slope method. For the data influenced by serial correlation, various modified versions of Mann-Kendall tests (Pre-Whitening, Trend Free Pre-Whitening, Bias Corrected Pre-Whitening and two variants of Variance Correction Approaches) were applied. A significant increasing summer rainfall trend is observed in 6 out of 27 stations. Significant decreasing trends are observed at two stations in the south-west monsoon season and at two stations in the north-east monsoon season. To identify the trend change-points in the time series, distribution-free Cumulative SUM test and sequential Mann-Kendall tests were applied. Two open-source library packages were developed in R language namely, ‘modifiedmk’ and ‘trendchange’ to implement the statistical tests mentioned in this paper. The study will benefit water resource management, drought mitigation, socio-economic development and sustainable agricultural planning in the region.

In quantum approaches to consciousness, the authors try to propose a model and mechanism for the mind-brain interaction using modern physics and some quantum concepts which do not exist in the classical physics. The independent effect of mind on the brain has been one of the challenging issues in the history of science and philosophy. In some recent mind-brain interaction models, the direct influence of mind on matter is either not accepted (as in Stapp’s model) or not clear, and there have not been any clear mechanism for it (as in Penrose-Hameroff’s model or in Eccles’s model). In this manuscript we propose a model and mechanism for mind’s effect on the matter using an extended Bohmian quantum mechanics and Avicenna’s ideas. We show that mind and mental states can affect brain’s activity without any violation of physical laws. This is a mathematical and descriptive model which shows the possibility of providing a causal model for mind’s effect on matter. It is shown that this model guarantees the realistic philosophical constraints and respects the laws of nature. In addition, it is shown that it is in agreement with the Libet style experimental results and parapsychological data. To propose this model, we obtained a modified (non-unitary) Schrödinger equation via second quantization method which affects the particle through a modified quantum potential and a new term in the continuity equation. At the second quantized level, which is equivalent to quantum field theory level (QFT), we can use the path integral formalism of Feynman. We show that there are three methods to extend Bohmian QM via path integral formalism, which has different interpretations. By numerical simulation of trajectories in the two-slits experiment, we show their differences and choose one of these methods for our mind-brain model which can be the basis for explaining some phenomena which are not possible to explain in the standard Bohmian QM.

Three kinds of hydrophobic groups grafted starches of maleic anhydride grafted starch (MAH-g-starch), lactic acid grafted starch (LA-g-starch), and methyl acrylate grafted starch (MA-g-starch) were prepared by in-situ solid phase polymerization. The results of Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were confirmed successful grafting. The grafting ratios of MAH-g-starch, LA-g-starch and MA-g-starch were 6.50%, 12.45%, and 0.57%, respectively. Influenced by the grafting ratio, LA-g-starch had the best hydrophobic properties and the largest molecular weight, and those for MA-g-starch was the worst. The surfaces of grafted starches were covered with graft polymer, with obvious surface roughness and bond degree of MAH-g-starch and LA-g-starch. The crystalline structure of grafted starches showed some damage, with LA-g-starch exhibiting the greatest decrease in crystallinity, and less of a change for MA-g-starch. Overall, the grafting reaction improved thermoplasticity, with LA-g-starch the most improved, followed by MAH-g-starch, and then MA-g-starch.

In this paper, we revisit a modified version of the classical Whitehead's theory of gravity in which all possible bilinear forms are considered to define the corresponding metric. Although, this is a linear theory that fails to give accurate results for the most sophisticated predictions of general relativity, such as gravity waves, it can still provide a convenient framework to analyze some new phenomena in the Solar System. In particular, recent development in the accurate tracking of spacecraft and the ephemerides of planetary positions have revealed certain anomalies in relation with our standard paradigm for celestial mechanics. Among them the so-called flyby anomaly and the anomalous increase of the astronomical unit play a prominent role. In the first case the total energy of the spacecraft changes during the flyby and a secular variation of the semi-major axis of the planetary orbits is found in the second anomaly. For this to happen it seems that a net energy and angular momentum transfer is taken place among the orbiting and the central body. We evaluate the total transfer per revolution for a planet orbiting the Sun in order to predict the astronomical unit anomaly in the context of Whitehead's theory. This could lead to a more deeply founded hypothesis for an extended gravity model.

Inverse Sumudu transform multiple shifting properties are used to design methodology for solving ordinary differential equations. Then algorithm applied to solve Whittaker and Zettl equations to get their new exact solutions and profiles which shown through Maple complex graphicals. Table of inverse Sumudu transforms for elementary functions given for supporting the differential equations solving using inverse Sumudu transform.

The exceptional Jordan algebra is the algebra of $3 \times 3$ Hermitian matrices with octonionic entries. It is the only one from Jordan’s algebraic formulation of quantum mechanics which is not equivalent to the conventional formulation of quantum theory. It has often been suggested that this exceptional algebra could explain physical phenomena not currently explained by the conventional approach, such as values of the fundamental constants of the standard model of particle physics, and their relation to gravitation. We show that this is indeed the case; and this also unravels the connection between general relativity and the weak force. The exceptional Jordan algebra also predicts a new U(1) gravitational interaction which modifies general relativity, and which provides a theoretical basis for understanding the Modified Newtonian Dynamics (MOND).

New modied Hayward metric of magnetically charged non-singular black hole spacetime in the framework of nonlinear electrodynamics is constructed. When the fundamental length introduced, characterising quantum gravity effects, vanishes one comes to the general relativity coupled with the Bronnikov model of nonlinear electrodynamics. The metric can have one (an extreme) horizon, two horizons of black holes, or no horizons corresponding to the particle-like solution. Corrections to the Reissner-Nordström solution are found as the radius approaches to innity. As r -> 0 the metric has a de Sitter core showing the absence of singularities. The asymptotic of the Ricci and Kretschmann scalars are obtained and they are nite everywhere. The thermodynamics of black holes, by calculating the Hawking temperature and the heat capacity, is studied. It is demonstrated that phase transitions take place when the Hawking temperature possesses the maximum. Black holes are thermodynamically stable at some range of parameters.

Modified FOLFIRINOX is effective for advanced pancreatic cancer but frequently causes severe neutropenia. The present study was designed to investigate the influence of severe neutropenia on clinical outcomes in advanced pancreatic cancer patients receiving modified FOLFIRINOX. Fifty-one advanced pancreatic cancer patients who received modified FOLFIRINOX during January 2014 and May 2018 were subjects of the present study. Adverse events, including neutropenia, were graded according to the Common Terminology Criteria for Adverse Events, version 4.0. Median overall survival (OS) was determined as the primary endpoint, while median time to treatment failure (TTF), overall response rate (ORR), and the incidence of other adverse events were measured as secondary endpoints. Severe neutropenia (grade≥3) occurred in 39 patients (76.4%), in which high level of total bilirubin (>0.6mg/dL) was a significant risk as assessed by a multivariate logistic regression analysis. Median duration of OS was significantly longer in patients with severe neutropenia than in those without it (15.2 months versus 7.2 months, P=0.032). Moreover, there was a significant correlation between OS and the grade of neutropenia (R=0.306, P=0.029). ORR tended to be higher, though not significantly, in patients with severe neutropenia. In contrast, the incidence rates of other adverse events were not different between the two groups. Severe neutropenia is an independent predictor of prognosis in advanced pancreatic cancer patients received modified FOLFIRNOX therapy.

The first part of this paper contains a brief description of the beginnings of modern cosmology, which, the author will argue, was most likely born in the Year 1912. Some of the pieces of evidence presented here have emerged from recent research in the history of science, and are not usually shared with the general audiences in popular science books. In special, the issue of the correct formulation of the original Big Bang concept, according to the precise words of Fred Hoyle, is discussed. Too often, this point is very deficiently explained (when not just misleadingly) in most of the available generalist literature. Other frequent uses of the same words, Big Bang, as to name the initial singularity of the cosmos, and also whole cosmological models, are then addressed, as evolutions of its original meaning. Quantum and inflationary additions to the celebrated singularity theorems by Penrose, Geroch, Hawking and others led to subsequent results by Borde, Guth and Vilenkin. And corresponding corrections to the Einstein field equations have originated, in particular, R², f(R), and scalar-tensor gravities, giving rise to a plethora of new singularities. For completeness, an updated table with a classification of the same is given.

Surface water distribution extracted from remote sensing data has been used in water resource assessment, coastal management, and environmental change studies. Traditional manual methods for extracting water bodies cannot satisfy the requirements for mass processing of remote sensing data; therefore, accurate automated extraction of such water bodies has remained a challenge. The histogram bimodal method (HBM) is a frequently used objective tool for threshold selection in image segmentation. The threshold is determined by seeking twin peaks, and the valley values between them; however, automatically calculating the threshold is difficult because complex surfaces and image noise which lead to not perfect twin peaks (single or multiple peaks). We developed an operational automated water extraction method, the modified histogram bimodal method (MHBM). The MHBM defines the threshold range of water extraction through mass static data; therefore, it does not require the identification of twin histogram peaks. It then seeks the minimum values in the threshold range to achieve automated threshold. We calibrated the MHBM for many lakes in China using Landsat 8 Operational Land Imager (OLI) images, for which the relative error (RE) and squared correlation coefficient (R2) for threshold accuracy were found to be 2.1% and 0.96, respectively. The RE and root-mean-square error (RMSE) for the area accuracy of MHBM were 0.59% and 7.4 km2. The results show that the MHBM could easily be applied to mass time-series remote sensing data to calculate water thresholds within water index images and successfully extract the spatial distribution of large water bodies automatically.

Additive manufacturing (AM) techniques are widely investigated for the cost-effective use of titanium (Ti) alloys in various aerospace applications. One of the AM techniques developed for such applications is plasma transferred arc solid free-form fabrication (PTA-SFFF). Materials manufactured through AM techniques often exhibit anisotropies in mechanical properties due to the layer-by-layer material build. In this regard, the present study investigates the isothermal directional fatigue of Ti-TiB metal matrix composite (MMC) manufactured by PTA-SFFF. This investigation includes rotating beam fatigue test, electron microscopy, and fatigue calculations. The fatigue experiments were performed at 350 ºC using specimen with the test axis oriented diagonally (45º) and parallel (90º) to the AM builds directions. The fatigue values from the current experiments along with literature data find that Ti MMC manufactured via PTA-SFFF exhibit fatigue anisotropy reporting highest strength in 90º and lowest in perpendicular (0º) AM build directions. Further, the electron microscopy investigations on 0º, 45º, and 90º AM build specimens reveal frequent TiB clusters in all three AM build directions and suggest that the spread of these TiB clusters play a role in fatigue anisotropy. Moreover, the fatigue calculations were performed using both the Paris’ and recently reported modified Paris’ equations. Comparison of R^2 values for these calculations show that modified Paris’ equation predicts the fatigue life of AM Ti-TiB MMC more accurately than the Paris’ equation.

Experimental tests and numerical analyses were carried out on short, thin-walled channel columns with modified cross-sectional shape. The columns were loaded with an axial compressive force applied at the center of gravity of the cross section. Tests were carried out on a universal testing machine, while numerical analyses were performed in ANSYS software. The purpose of the tests was to determine the values of critical forces for the compressed columns and to determine the values of maximum forces at which failure of the columns occurs. Critical forces were determined based on the strain-averaged method. Based on the study, it was found that the strength and resistance to loss of stability of columns is primarily affected by their stiffness, and therefore by the shape of the cross-sections. In addition, for short columns, it seems more important to determine the value of maximum forces than the values of critical forces.

Debates on climate change challenges around the world are moving in favour of nature-based solutions (NBS) as potential mitigation and adaptation options. Mangroves and associated blue carbon ecosystems are nature-based solutions against sea level rise and other coastal hazards. As such, protecting the existing mangrove forests and restoration of the degraded areas is integral in this aspect. However, conventional mangrove restoration approaches in high-energy areas result in poor performance due to the removal of seedlings by waves. Here, we assessed the efficacy of using modified Riley Encasement Methods in the restoration of eroding intertidal areas of Gazi Bay, Kenya. Vegetation and soil baseline data were collected in 49 square plots of 100m2; established along belt transects perpendicular to the waterline. The following mangrove vegetation data was collected; species composition, tree height (m), and stem diameter (cm); from which the importance value index (IV), basal area and standing density (stems/ha) were derived. Sediment cores were made in the center of each square plot for carbon and grain size analysis. Mangrove (Rhizophora mucronata) planting adopted a randomized complete block design (RCBD) in which the planting area was divided into three blocks (A, B, C). Within each block, treatments (bamboo and different-sized PVC pipes) were randomly assigned locations. Results show that seedlings grown within PVC encasements had high survival and growth rates, surpassing bamboo and control groups. This implies that PVC pipes offer better protection from external factors. These findings are critical in highlighting potential enhancements for the effectiveness of PVC pipes in mangrove restoration. They also reinforce on the need to consider the incorporation of PVC encasements as an alternative mangrove restoration technique in high-energy locations.

(1) Background: Retroareolar breast tumors are common, but they rarely progress to malignancy. This report presents a case of a 41-years-old woman with a superficial breast tumor, emphasizing the significance of considering a wide range of options when evaluating breast lumps. (2) Methods: The patient presented with a steadily growing, ulcerating superficial tumor in her left breast. To determine the nature of the tumor, a diagnostic assessment was conducted, which included a positron emission tomography (PET) scan and histological analysis. (3) Results: The diagnostic assessment confirmed the presence of a malignant Grade II superficial infiltrating ductal carcinoma. Following the diagnosis, the patient underwent a modified radical mastectomy under general anesthesia. Subsequently, she received four cycles of adjuvant chemotherapy, followed by taxol administrations. (5) Conclusions: This case report underscores the importance of conducting a thorough examination and maintaining a high index of suspicion for breast tumors. By documenting this case, the report contributes to the existing knowledge on various manifestations of breast cancer and highlights the necessity of early identification and aggressive treatment. This knowledge can be applied to identify and manage similar cases in the future, leading to improved patient outcomes.

Despite the high prevalence of epilepsy in individuals with autism spectrum disorder (ASD) there is little information regarding whether seizure characteristics and treatment effectiveness change across age. Using an on-line survey, seizure characteristics, effectiveness of antiepileptic treatments, comorbidities and ASD diagnosis were collected from individuals with ASD and seizures. We previously reported overall general patterns of treatment effectiveness but did not examine the effect of seizure characteristics or age on antiepileptic treatment effectiveness. Such information would improve the personalized medicine approach to the treatment of seizures in ASD. Survey data from 570 individuals with ASD and clinical seizures were analyzed. Seizure severity (seizure/week) decreased with age of onset of seizures, plateauing in adolescence, with a greater reduction in generalized tonic clonic (GTC) seizures with age. Seizure severity was worse in those with genetic disorders, neurodevelopmental regression (NDR) and poor sleep maintenance. Carbamazepine and oxcarbazepine were reported to be more effective when seizures started in later childhood while surgery and the Atkin’s/Modified Atkin’s Diet (A/MAD) were reported to be more effective when seizures started early in life. A/MAD and the ketogenic diet were reported to be more effective in those with NDR. Interestingly, atypical Landau-Kleffner syndrome was associated with mitochondrial dysfunction and NDR, suggesting a novel syndrome. These interesting findings need to be verified in independent, prospectively collected cohorts, but none-the-less these data provide some insight into novel relationships that may assist in a better understanding of epilepsy in ASD and providing insight into personalizing epilepsy care in ASD.

As time continues to advance, the need for robust security threat mitigation has become increasingly vital in software. However, ensuring early effective security threat mitigation requires optimal test data and consistent test case design. It is a constant struggle to maximize test coverage through test data optimization. We conducted explanatory research to maximize test coverage of security requirements as modeled in Structured Misuse Case Description (SMCD) i.e., structured specification of misuse case, so as to improve consistency in optimal test data generation. We specified constraints upon Mal activity in Object Constraint Language (OCL) in order to minimize human dependency and improve consistency in optimal test data generation. It was evident through results that MC/DC generated optimal test data of security threats through SMCD in comparison to the Decision Coverage method thus resulting in designing a significantly lower number of test cases and yet maximizing test coverage of security threats. MC/DC generated test data with n+1, while Decision Coverage generated test data with〖 2〗^n, we, therefore, conclude that MC/DC maximizes test coverage through optimal test data from SMCD in comparison to Decision Coverage.

At present there is a renewed interest in theories of ”modified” gravity. Here, under a more drastic modification enforced by Galilei group, we obtain a completely new gravitational structure, and which exists in addition to the already available general relativity of today. Correlated with this, we show that in addition, there is a new ”modified” quantum mechanics, in as much as it exists as an independent and new ”pure” non-relativistic quantum me- chanics, and which has no relativistic counterpart. This is in addition to the present quantum mechanics, where the relativistic and non-relativistic structures are counterparts of each other. The above holds, firstly due to the correlation between Galilei group and quantum mechanics. These math- ematical conclusions are consolidated by the fact that there exists a physical Majorana interaction between each neutron- proton pairs in nuclei. Galilei invariance of Majorana exchange in Majorana interaction, shows that the mass here is of pure gravitational nature, and which is immune to the other three forces. This makes an amazing connection between the gravitational force and the quantum mechanics. This pure gravitational mass would man- ifest itself as dark matter of the universe. It is our new modified gravity that generates the dark matter.

Glucose is the primary energy fuel used by the brain and is transported across the blood-brain barrier (BBB) by the glucose transporter type 1 and 2.[1] A GLUT1 genetic defect is responsible for glucose transporter type 1 deficiency syndrome (GLUT1DS). Patients with GLUT1DS may present with pharmaco-resistant epilepsy, developmental delay, microcephaly, and/or abnormal movements, with tremendous phenotypic variability. Diagnosis is made by the presence of specific clinical features, hypoglycorrhachia and an SLC2A1 gene mutation. Treatment with a ketogenic diet therapy (KDT) is the standard of care as it results in production of ketone bodies which can readily cross the BBB and provide an alternate energy source to the brain in the absence of glucose. KDTs have been shown to reduce seizures and abnormal movements in children diagnosed with GLUT1DS. However, little is known about the impact of KDT on cognitive function, seizures and movement disorders in adults newly diagnosed with GLUT1DS and started on a KDT in adulthood, or the appropriate ketogenic diet therapy to administer. This case report demonstrates the potential benefits of using a modified Atkins diet (MAD), a less restrictive ketogenic diet therapy on cognition, seizure control and motor function in an adult with newly-diagnosed GLUT1SD.

The basis of modern teeth whitening systems is the use of a whitening gel, usually containing hydrogen peroxide or carbamide peroxide. The purpose of our study was to evaluate the effect of chemical and modified office teeth whitening systems on the mineral metabolism of oral fluid and to determine a safer method. The study covered 81 patients aged 22 to 35 years of both sexes with teeth color A2 and darker on the Vita Classic scale. Determination of the concentration of calcium and phosphates in the oral fluid was carried out on a spectrophotometer using ready-made Human kits. Chemical tooth whitening was performed using a gel based on 40% hydrogen peroxide. After the procedure, remineralization therapy with enamel-sealing liquid was performed for 14 days. The obtained results indicate that the most pronounced changes in the content of calcium (+74.4%, p &lt;0.001) and рhosphates (phosphorus) (-23.07%, p &lt;0.001) were observed when using a chemical bleaching system. After the teeth whitening procedure using a modified technique, less pronounced changes in the concentrations of calcium (+29.07, p &lt;0.001) and phosphorus (-14%, p &lt;0.001) were observed. The use of remineralizing agents led to a faster recovery of the initial levels of calcium and phosphates in the oral fluid. Both bleaching systems caused similar changes in the chemical composition of the oral fluid.

A growing number of clinical data suggests that the use of antiplatelets and/or statins pre-stroke are associated with reduced severity and better functional outcomes for ischemic stroke. Studies have shown that the long-term use of ACEI/ARB pre-stroke is beneficial in reducing severity at onset and improving functional outcomes. We aimed to compare stroke severity and early functional outcome between patients taking ACEI/ARB and those who were not, and to identify any additional effects to taking ACEI/ARB with antiplatelets, statins, or both. In this retrospective case-control study, we assessed 218 patients who presented with ischemic stroke to the stroke unit in Padeh-Poriyah Hospital between 2019-2020. Of these patients, 119 took ACEI/ARB pre-stroke. A significantly higher percentage of ACEI/ARB-treated patients had a history of hypertension (HTN) and hyperlipidemia and were taking antiplatelets and/or statins, compared to the non-ACEI/ARB group. We observed that pre-stroke treatment with ACEI/ARB is associated with worsened stroke severity and reduced early functional outcomes. No significant benefit to taking ACEI/ARB with antiplatelets and/or statins pre-stroke was observed. Due to the nature of our study, the data should be interpreted as suggestive. Thus, prospective studies of these medications on ischemic stroke severity and early outcomes are warranted.

In this paper, we study quantum gravity effect on the symmergent black hole which is derived from quadratic-curvature gravity. To do so, we use the Klein-Gordon equation which is modified by generalized uncertainty principle (GUP). After solving the field equations, we examine the symmergent black hole's tunneling and Hawking temperature. We explore the graphs of the temperature through the outer horizon to check the GUP influenced conditions of symmergent black hole stability. We also explain how symmergent black holes behave physically when influenced by quantum gravity. The impacts of thermal fluctuations on the thermodynamics of a symmergent black holes spacetime are examined. We first evaluate the model under consideration's thermodynamic properties, such as its Hawking temperature, angular velocity, entropy, and electric potential. We evaluate the logarithmic correction terms for entropy around the equilibrium state in order to examine the impacts of thermal fluctuations. In the presence of these correction terms, we also examine the viability of the first law of thermodynamics. Finally, we evaluate the system's stability using the Hessian matrix and heat capacity. It is determined that a stable model is generated by logarithmic corrections arising from thermal fluctuations.

That how to improve the sensitivity and the detection ability of the Large-caliber sensor is critical to satisfy the requirement of heavy vehicle wear condition monitoring. In this paper, we introduced the LC resonance principle to the design of sensor with large flow channel (7mm). The resonant exciting coil increases the impedance change of the exciting circuit caused by wear particles which magnify the current difference between the two exciting coils and improve the sensitivity of the sensor. The resonant induction coil greatly suppresses the interference signals and magnifies the weak induced electromotive force which is beneficial to enhance the detection ability. In order to boost the detectability for different materials particles, a phase controlled variable-frequency exciting system (PCVFES) was adopted to automatically switch the exciting frequency between 284kHz for ferromagnetic particles and 420KHz for non-ferromagnetic particles. For the weak signal detection, based on the essential characteristic of the signal, we apply a simpler method that modified lock-in amplifier (MLIA) rather than the conventional algorithms (Wavelet transform, EMD). Results show that using these methods the sensitivity and the detection ability of the sensor are significantly improved and the 75μm iron particles and 220μm copper particles were successfully detected which realizes the initial abnormal wear monitoring for the large flow project.

Modern organic synthesis is majorly focused on developing environmentally benign synthetic protocols by employing green chemistry principles. Accordingly, in our recent research work, we herein report the use of modified supramolecular host cyclodextrin as an effective solid based green catalyst for accessing structurally diverse and medicinally relevant pyrimidone architectures. The catalyst and the synthesized compounds 4 (a-r) were characterized using FT-IR, NMR and GC-Mass spectroscopy. Major highlights of the reported work include: atom economical process, extremely milder reaction conditions, operational simplicity, high isolated yields, and excellent catalyst turnover number. The molecular docking studies suggest that the compound 4n has the hydrogen bonding, hydrophobic and π-pair interactions with the active site of active sites of CXT M 15 receptor.

This study explores optimizing Synthetic Aperture Radar (SAR) satellite constellation scheduling for multi-imaging missions in densely targeted areas using an in-house developed Modified Dynamic Programming (MDP) algorithm. By employing Mixed-Integer Linear Programming (MILP) to define the mission planning problem, the research aims to maximize observation of high-value targets within restricted planning horizons. Numerical simulations, covering a wide range of target numbers and satellite configurations, reveal the MDP algorithm’s superior mission allocation efficiency, enhanced success rates, and reduced revisit times, compared to the Greedy algorithm. The findings underscore the MDP algorithm’s improved operational efficiency and planning robustness for complex imaging tasks, demonstrating significant advancements over traditional approaches.