The rapid development of China's economy has led to a rapid increase in energy production and use. Among them, the excessive consumption of coal in fossil energy consumption is the leading cause of air pollution in China. This paper incorporates renewable energy innovation, fossil energy consumption and air pollution into a unified analysis framework, and uses spatial measurement models to investigate the spatial effects of renewable energy green innovation and fossil energy consumption on air pollution in China, and decomposes the total impact into direct and indirect effects. influences. The empirical results show that China's air pollution, renewable energy green innovation and fossil energy consumption are extremely uneven in geographical space, generally showing the characteristics of high in the east and low in the west, and showing a strong spatial aggregation phenomenon. Fossil energy consumption will lead to increased air pollution, and the replacement of fossil fuels with clean and renewable energy is an important means of controlling pollution emissions. The direct and indirect effects of renewable energy green innovation on air pollution are significantly negative, indicating that renewable energy green innovation not only suppresses local air pollution, but also suppresses air pollution in neighboring areas. The consumption of fossil energy will significantly increase the local air pollution, and the impact on the SO2 and Dust&Smoke pollution in the adjacent area is not very obvious. It is recommended to strengthen investment in renewable energy green innovation, reduce the proportion of traditional fossil energy consumption, and pay attention to the spatial connection and spillover of renewable energy green innovation.

The mitochondrial network (MN) is a dynamic structure undergoing constant remodeling in the cell. It is assumed that the violation of MN may be associated with various pathologies, including Parkinson’s disease (PD). Using automatic image analysis and super-resolution microscopy, we have assessed the MN parameters in fibroblasts from patients with established hereditary PD mutations (associated with PINK1, LLRK2, α-synuclein, PINK1 and Parkin simultaneously proteins) under normal conditions and after hydrogen peroxide-induced stress. Fibroblasts with Pink1/Parkin mutation are the most different in morphology from fibroblasts obtained from conditionally healthy donors: MN is larger, contains longer mitochondria and accumulated individual mitochondria. In addition to MN, we evaluated other cellular parameters, such as: cytosolic and mitochondrial ROS production and mitochondrial membrane potential. It has been shown that mitochondria of fibroblasts with mutations in genes encoding PINK1, α-synuclein and Pink/Parkin tends to hyperpolarization and cytosolic ROS overproduction, while mitochondrial ROS production was higher only in fibroblasts with PINK1 and α-synuclein mutation.

With the abundance of conversations happening everywhere, dialogue summarization plays an increasingly important role in the real world. However, dialogues inevitably involve lots of personal pronouns, which hinder the performance of existing dialogue summarization models. This work proposes a framework named WHORU to inject external personal pronoun resolution (PPR) information into abstractive dialogue summarization models. To reduce time and space consumption, we further propose a simple and effective PPR method for the dialogue domain. Experiments demonstrated the superiority of the proposed methods. More importantly, we achieve new SOTA results on SAMSum and AMI datasets.

Deep learning technologies for skin cancer detection have been dramatically advanced based on high resolution dermoscopic images. The low-cost approach based on clinical skin images of low resolution is promising but remains technically challenging due to their undermined image quality. In this paper, we propose a coarse-to-fine efficient super resolution transformer (CF-ESRT) network to reconstruct the dermoscopy-level high resolution skin image from a low resolution clinical image. By connecting the refinement network to the original super resolution transformers and applying perceptual and gradient losses, our framework noticeably improves the finer texture details of skin lesions in the super resolution (SR) images, and is effective to elevate the perceptual quality of the SR images. Quantitative and qualitative evaluations show that our method outperforms ESRT the basis model as well as the other state-of-the-art SR models.

A system of wavelet collocation upwind schemes is constructed for solving hyperbolic conserva-tion laws based on a class of interpolation wavelets. The bias magnitude and symmetry factor are defined to depict the asymmetry of the adopted scaling basis function in wavelet theory. Effects of characteristics of the scaling functions on the schemes are explored based on numerical tests and Fourier analysis. The numerical results reveal that the stability of the constructed scheme is af-fected by the smoothness order, N, and the asymmetry of the scaling function. The dissipation analysis suggests that schemes with Neven have negative dissipation coefficients, leading to unstable behaviors. Only scaling functions with Nodd and bias magnitude of 1 can be used to construct stable upwind schemes due to the non-negative dissipation coefficients. Resolution of the wavelet scheme tends to the spectral resolution as the order of accuracy of the scheme in-creases.

The maker movement has reached the optics labs, empowering researchers to actively create and modify microscope designs and imaging accessories. 3D printing has especially had a disruptive impact on the field, as it entails an accessible new approach in fabrication technologies, namely additive manufacturing, making prototyping in the lab available at low cost. Examples of this trend are taking advantage of the easy availability of 3D printing technology. For example, inexpensive microscopes for education have been designed, such as the FlyPi. Also, the highly complex robotic microscope OpenFlexure represents a clear desire for the democratisation of this technology. 3D printing facilitates new and powerful approaches to science and promotes collaboration between researchers, as 3D designs are easily shared. This holds the unique possibility to extend the open-access concept from knowledge to technology, allowing researchers from everywhere to use and extend model structures. Here we present a review of additive manufacturing applications in microscopy, guiding the user through this new and exciting technology and providing a starting point to anyone willing to employ this versatile and powerful new tool.

Panchromatic (PAN) images contain abundant spatial information that is useful for earth observation, but always suffer from low-resolution due to the sensor limitation and large-scale view field. The current super-resolution (SR) methods based on traditional attention mechanism have shown remarkable advantages but remain imperfect to reconstruct the edge details of SR images. To address this problem, an improved super-resolution model which involves the self-attention augmented WGAN is designed to dig out the reference information among multiple features for detail enhancement. We use an encoder-decoder network followed by a fully convolutional network (FCN) as the backbone to extract multi-scale features and reconstruct the HR results. To exploit the relevance between multi-layer feature maps, we first integrate a convolutional block attention module (CBAM) into each skip-connection of the encoder-decoder subnet, generating weighted maps to enhance both channel-wise and spatial-wise feature representation automatically. Besides, considering that the HR results and LR inputs are highly similar in structure, yet cannot be fully reflected in traditional attention mechanism, we therefore design a self augmented attention (SAA) module, where the attention weights are produced dynamically via a similarity function between hidden features, this design allows the network to flexibly adjust the fraction relevance among multi-layer features and keep the long-range inter information, which is helpful to preserve details. In addition, the pixel-wise loss is combined with perceptual and gradient loss to achieve comprehensive supervision. Experiments on benchmark datasets demonstrate that the proposed method outperforms other SR methods in terms of both objective evaluation and visual effect.

This algorithm is designed to perform Discrete Fourier Transforms (DFT) to convert temporal data into spectral data. This algorithm obtains the Fourier Transforms by studying the Coefficient of Determination of a series of artificial sinusoidal functions with the temporal data, and normalizing the variance data into a high-resolution spectral representation of the time-domain data with a finite sampling rate. What is especially beneficial about this DFT algorithm is that it can produce spectral data at any user-defined resolution.

We describe a multi-resolution approach for audio classification and illustrate its application to the open data set for environmental sound classification. The proposed approach utilizes a multi-resolution based ensemble consisting of targeted feature extraction of approximation (coarse scale) and detail (fine scale) portions of the signal under the action of multiple transforms. This is paired with an automatic machine learning engine for algorithm and parameter selection and the LSTM algorithm, capable of mapping several sequences of features to a predicted class membership probability distribution. Initial results show an improvement in multi-class classification accuracy.

Despite its apparent lack of physicality, the virtual environment produces real experiences to its users. In its intangible context of digital operation, the virtual setting can be a meeting point for individuals to interact and to gain experiences that have an impact upon their lives. After more than three decades of broad accessibility and use of the internet and various digital platforms, the virtual experience has also prompted to rethink many of the assumptions commonly attributed to physical space. From a practical point, the virtual world has been an extension of the real one as a new site that can host people’s activities without many of the limitations associated with the material world. Given its absence of physical restrictions, the virtual space appears as a boundless one, whose potential of evolution is still unclear. This sense of limitedness has caused to shift our common sense about physical space as well, including architectural perception and the methods and practices applied to design it. In response, this present study focuses on the ways in which elements and concepts of the virtual world may be transferred to physical space and enrich architectural aims and the broader design discourse.

This study contributes to the debate on accessibility of higher education in Chile, focusing on both socioeconomic and geospatial dimensions of access to university study. The central question we address in this paper is the following: Does geography (physical distance and neighborhood effects) play a significant role in determining accessibility of higher education in Chile? We use Heckman probit-type (Heckit) models to adjust for selection in the process of completing the trajectory towards higher education – that is, pre-selection, application to study at university, and ultimately admission (or denial) to a higher education institution. The results shows that the geospatial elements have a significant local effect on the student’s application and access to Chilean universities.

The COVID-19 pandemic starting in the first half of 2020 has changed the lives of everyone across the world. Reduced mobility was essential due to it being the largest impact possible against the spread of the little understood SARS-CoV-2 virus. To understand the spread, a comprehension of human mobility patterns is needed. The use of mobility data in modelling is thus essential to capture the intrinsic spread through the population. It is necessary to determine to what extent mobility data convey the same message of mobility within a region. This paper compares different mobility data sources by constructing spatial weight matrices and further compares the results through hierarchical clustering. This provides insight for the user into which data provides what type of information and in what situations a particular source is most useful.

This study aimed to use spatiotemporal tensor data to measure the level of employment quality in China's provinces and analyzed the magnitude and direction of its influencing factors in the spatiotemporal dimension. Taked 30 provinces, autonomous regions and municipalities directly under the central government in China from 2011 to 2020 as the research object, the employment quality evaluation system was constructed from six dimensions of employment environment, employment status, employability, labor remuneration, social security, and labor relations. The employment quality index data was expressed as a three-order high-dimensional tensor spatio-temporal data form, and the employment quality of China's provinces was measured from the spatio-temporal perspective by using principal tensor analysis, and the visual analysis of the development and change process of employment quality was carried out. The spatial autocorrelation analysis of employment quality was carried out, and the time-space dual fixed effect model of the spatial Dubin model was selected to analyze the direction and magnitude of the influence factors of employment quality on itself and its neighboring provinces. The research showed that: (1) The overall level of employment quality in China was not high and the employment quality varies greatly among provinces, and the employment quality development gap among provinces showed a trend of widening. (2) The development of employment quality in western China was relatively fast, while the development of employment quality in central China showed insufficient stamina. (3) Sichuan Province had a strong radiation effect on the development of employment quality in neighboring provinces, and Beijing and Tianjin had a strong siphon effect on the development of employment quality in neighboring provinces. (4) The level of industrialization and informatization promoted the development of employment quality in China's provinces, while the industrial structure had a significant negative effect on the development of employment quality.

We utilized all Spanish marriage records available at the municipality level from 2005-2007 to model spatial variations in intermarriage. We constructed a spatial regime zero inflated Poisson model and grouped-data probit model, with spatially lagged regressors, to predict the absolute and relative presence of intermarriage between Spaniards and migrants based on structural characteristics of the local marriage markets and their neighboring areas (i.e., relative group size, homogeneity of national origins, and sex ratio indicators). Our models do not assume collapsibility of the marriage market. Instead, they incorporate the local dimension of the marriage market and examine the association between intermarriage and structural variables at the spatial local level. The model also investigates intermarriage variation by size of place. The local characteristics of the marriage markets are robust indicators of both the absolute and relative importance of intermarriage, but their impact varies by size of municipality. The relative size of the migrant community positively impacts intermarriage. The homogeneity of the origins of migrants is negatively related to it. The impact of sex ratios in the migrant and native communities on intermarriage is not uniform across all municipalities and is not always related to more intermarriage.

A low-cost machine learning (ML) algorithm is proposed and discussed for spatial tracking of unknown, correlated signals in localized, ad-hoc wireless sensor networks. Each sensor is modeled as one neuron and a selected subset of these neurons are called to identify the spatial signal. The algorithm is implemented in two phases of spatial modeling and spatial tracking. The spatial signal is modeled using its M iso-contour lines at levels {ℓj}j=1M and those sensors that their sensor observations are in Δ margin of any of these levels report their sensor observations to the fusion center (FC) for spatial signal reconstruction. In spatial modeling phase, the number of these contour lines, their levels and a proper Δ are identified. In this phase, the algorithm may either use adaptive-weight stochastic gradient or scaled stochastic gradient method to select a proper Δ. Additive white Gaussian noise (AWGN) with zero mean is assumed along with the sensor observations. To reduce the observation noise’s effect, each sensor applies moving average filter on its observation to drastically reduce the effect of noise. The modeling performance, the cost and the convergence of the algorithm are discussed based on extensive computer simulations and reasoning. The algorithm is proposed for environmental monitoring. In this paper, the percentage of the communication attempts of wireless sensors is assumed as cost. Performance evaluation results show that the proposed spatial tracking approach is low cost and can model the spatial signal over time with the same performance as that of spatial modeling.

Background: Military pilots show high visuo-spatial skills. Previous studies demonstrate that they are better in mental rotating a target, in taking different perspectives, in estimating distances, in travel planning and in topographic memory. Here, we compared navigational cognitive styles between military pilots and people without flight experience. Pilots were expected to be more survey users than non-pilots, showing higher navigational strategies. Method: 106 jet military pilots of Italian Air Force and 92 non-pilots were enrolled in order to investigate group differences in navigational styles. Participants were asked to perform a reduced version of the Spatial Cognitive Style Test – SCST, consisting of six tasks that allow to distinguish individuals in landmark (people orient themselves by using a figurative memory for environmental objects), route (people use an egocentric representation of the space) and survey (people have a map-like representation of the space) users. Results: In line with our hypothesis, military pilots mainly adopt a survey style, whereas non-pilots mainly adopt the route style. In addition, pilots outperformed non pilots in both the 3D-Rotation task and Map Description Task. Conclusion: Military flight expertise influences some aspects of the spatial ability, leading to enhance human navigation. Although, it must be considered that they are a population whose navigational skills were already high at the time of selection at the academy before formal training began.

In recent years, researchers have paid increasing attention on hyperspectral image (HSI) classification using deep learning methods. To improve the accuracy and reduce the training samples, we propose a double-branch dual-attention mechanism network (DBDA) for HSI classification in this paper. Two branches are designed in DBDA to capture plenty of spectral and spatial features contained in HSI. Furthermore, a channel attention block and a spatial attention block are applied to these two branches respectively, which enables DBDA to refine and optimize the extracted feature maps. A series of experiments on four hyperspectral datasets show that the proposed framework has superior performance to the state-of-the-art algorithm, especially when the training samples are signally lacking.

The evaluation of spatial planning results, or outcomes, has been rather neglected by scholars and practitioners. The causes of this neglect are linked to the characteristics of the planning systems in use or difficulties in quantifying results. To advance the state of the art of outcome evaluation, this paper focuses on assessing the implementation of national spatial planning objectives in urban landscapes, through the use of an evaluation framework that makes use of spatially explicit information. The framework is built on four dimensions which reflect the main domains of spatial planning: efficient built-up development, conservation of agricultural land, landscape preservation, and human perception. Indicators capable of capturing landscape changes in both time and space are used to verify degree of conformance between adopted objectives and actual development patterns. We make use of spatially explicit data and assess whether and where landscape changes occurred, by integrating the framework into a multi-criteria analysis. In the present study, the framework is tested in two study areas in Switzerland and Romania, and the results are interpreted from the perspective of spatial planning approaches in the two countries. The efficiency and utility of the framework is demonstrated by its ability to provide valuable information facilitating improvement in the performance of planning processes, such as identifying where the implementation of objectives is less effective, and the domains of spatial planning that are affected. Our findings highlight that the distance between objectives and outcomes can be attributed to differences in countries’ spatial planning approaches, particularly regarding landscape preservation and management. Our study provides valuable insights for the integration of time series of spatial data into the evaluation procedure.

(1) Background: There is a risk of Aflatoxin B1(AFB1) pollution in yellow rice wine[1],threatening human life and health, the risk is a major focus of government attention and social concern.The current detection technology cannot meet the needs of large-scale testing due to the disadvantages of high false positive, cumbersome operating procedures or high cost.Therefore, it is urgent to study and establish a high-sensitivity and high-fast detection method for AFB1 to provide technical support for yellow rice wine quality supervision and risk assessment.; (2) Methods: In this study, three-factor and three-level orthogonal experiments were carried out for oscillation time, reaction temperature and tomography time to determine the best reaction conditions for pretreatment.AFB1 detection was carried out by aflatoxin time-resolved fluorescence immunochromatography technology，Through the ratio of the T signal value of the detection line to the C signal value of the quality control line and the natural logarithmic value of the standard solution concentration[2], a rapid detection technology of time-resolution fluorescence immunochromatography is established.The technology was methodically assessed, the actual yellow rice wine samples were tested, and the results were compared with the HPLC method; (3) Results: The results show that the optimal reaction conditions for pretreatment are: the sample oscillation time is 20min, the sample reaction temperature is 37°C, and the sample chromatography time is 6min. In the actual sample detection of yellow rice wine, The time-resolved fluorescence immunochromatography detection technology established in this study detects AFB1. The detection limit is 0.3 μg·kg-1,The linear range is 0.8-12.0μg·kg-1,The linear equation of the corresponding standard curve y=-0.1913x+0.5206 (R2=0.9948),The standard deviation is 0.029.The results of the in-batch accuracy and precision of this method show that the addition and recovery rate is 77.9% - 105.7%,The coefficient of variation is in 4.5% - 10.3%; Inter-batch accuracy and precision test results show that the addition recovery rate is75.9% - 85.8%,the coefficient of variation is in 8.1% - 13.9%,explain that the detection technology has good accuracy and precision.Compared with HPLC, the relative error is less than 10%,It shows that aflatoxin time-resolution fluorescence immunochromatography technology is in good agreement with the test results of national standard methods; (4) Conclusions:he rapid detection technology of time-resolution fluorescence immunochromatography of AFB1 in yellow rice wine is easy to operate with fast detection speed, high sensitivity, good repeatability and stability, and has broad application prospects.

Multispectral image (MSI) and hyperspectral image (HSI) fusion (MHIF) aims to address the challenge of acquiring high-resolution (HR) HSI images. This field combines a low-resolution (LR) HSI with an HR-MSI to reconstruct HR-HSI. Existing methods directly utilize transformers to perform feature extraction and fusion. Despite the demonstrated success, there exist two limitations: 1) Employing the entire transformer model for feature extraction and fusion fails to fully harness the transformer’s potential in integrating the spectral of the HSI and spatial information of the MSI. 2) HSI has a strong spectral correlation and exhibits sparsity in the spatial domain. Existing transformer-based models do not optimize this physical property, which makes their methods prone to spectral distortion. To accomplish these issues, this paper introduces a novel framework for MHIF called Sparse Mix-Attention Transformer (SAMformer). Specifically, to fully harness the advantages of the Transformer architecture, we propose a Spectral Mix Attention Block (SMAB), which concatenates the keys and values extracted from LR-HSI and HR-MSI to create a new multi-head attention module. This design facilitates the extraction of detailed long-range information across spatial and spectral dimensions. Besides, to address the spatial sparsity inherent in HSI, we incorporated a sparse mechanism within the core of SMAB called Sparse Spectral Mix Attention Block (SSMAB). In the SSMAB, we compute attention maps from queries and keys and select the K highly correlated values as the sparse attention map. This approach enables us to achieve a sparse representation of spatial information while eliminating spatially disruptive noise. Extensive experiments conducted on three benchmark datasets, namely Cave, Harvard, and Pavia Center, demonstrate the SMAformer method outperforms state-of-the-art methods.

Boosted by the progress in deep learning, Single Image Super-Resolution (SISR) has gained a lot of interest in the Remote Sensing community, who sees it as an oportunity to compensate for satellite's ever-limited spatial resolution with respect to end users needs. While there has been a great amount of work on network architures in the latest years, deep learning based SISR in remote sensing is still limited by the availability of the large training sets it requires. The lack of publicly available large datasets with the required variability in terms of landscapes and seasons pushes researchers to simulate their own dataset by means of downsampling. This may impair the applicability of the trained model on real world data at the target input resolution. In this paper, we propose an open-data licenced dataset composed of 10m and 20m cloud-free surface reflectance patches from Sentinel-2, with their reference spatially-registered surface reflectance patches at 5 meter resolution acquired on the same day by the VENµS satellite. This dataset covers 29 locations on earth with a total of 132 955 patches of 256x256 pixels at 5 meters resolution, and can be used for the training of super-resolution algorithms to bring the spatial resolution of 8 of the Sentinel-2 bands down to 5 meters.

Video super-resolution, which utilizes the relevant information of several low-resolution frames to generate high-resolution images, is a challenging task. One possible solution called sliding window method tries to divide the generation of high-resolution video sequences into independent sub-tasks, and only adjacent low-resolution images are used to estimate the high-resolution version of the central low-resolution image. Another popular method named recurrent algorithm proposes to utilize not only the low-resolution images but also the generated high-resolution images of previous frames to generate the high-resolution image. However, both methods have some unavoidable disadvantages. The former one usually leads to bad temporal consistency and requires higher computational cost while the latter method always can not make full use of information contained by optical flow or any other calculated features. Thus more investigations need to be done to explore the balance between these two methods. In this work, a bidirectional frame recurrent video super-resolution method is proposed. To be specific, a reverse training is proposed that the generated high-resolution frame is also utilized to help estimate the high-resolution version of the former frame. With the contribution of reverse training and the forward training, the idea of bidirectional recurrent method not only guarantees the temporal consistency but also make full use of the adjacent information due to the bidirectional training operation while the computational cost is acceptable. Experimental results demonstrate that the bidirectional super-resolution framework gives remarkable performance that it solves the time-related problems when the generated high-resolution image is impressive compared with recurrent-based video super-resolution method.

We explored the statistics of filtering of simple patterns on a number of deterministic and random graphs as a tractable simple example of information processing in complex systems. In this problem, multiple inputs map to the same output, and the statistics of filtering is represented by the distribution of this degeneracy. For a few simple filter patterns on a ring we obtained an exact solution of the problem and described numerically more difficult filter setups. For each of the filter patterns and networks we found a few numbers essentially describing the statistics of filtering and compared them for different networks. Our results for networks with diverse architectures appear to be essentially determined by two factors: whether the graphs structure is deterministic or random, and the vertex degree. We find that filtering in random graphs produces a much richer statistics than in deterministic graphs. This statistical richness is reduced by increasing the graph’s degree.

The eruption of the COVID-19 pandemic has affected every sphere of life and may forever change how we have always lived and conducted our businesses, and no one can resist the wind of change that is blowing. Of all the sectors of governance, the educational sector, particularly at the tertiary level, appears to have been most greatly affected and therefore requires a more pragmatic approach to resolution. As of 29th June, Sub-Sahara Africa has reported 382,190 cases of COVID-19. In rejoinder to the virus epidemic, several Sub Sahara African governments implement the resolution to slam learning institutions to enclose the infection. Consequently, advanced schooling institutions obliged to reorganize their loom, becoming more digitally become forward, and changing to online platforms.

Complementary Metal-Oxide-Semiconductor (CMOS) is a typical image sensor that has a wide range of applications. However, considering the limitations of the weather condition and hardware cost, it is hard to capture high-resolution images by CMOS sensor. Recently, Super-Resolution (SR) techniques for image restoration has been gaining attentions due to its excellent performance. Under the powerful learning ability, Generative Adversarial Networks (GANs) have been proved to achieve great success. In this paper, we propose the Advanced Generative Adversarial Networks (AGAN) to efficiently correct these issues; 1) we design a Laplacian pyramid framework as pre-trained module, which is beneficial to provide multi-scale features for our input. 2) at each feature block, a convolutional skip-connections network, which may contain some latent information, is significant for generative model to reconstruct a plausible-looking image; 3) considering that edge details usually play an important role in image generation, a novel perceptual loss function is defined to train and seek optimal parameters. It is effective to achieve excellent and compelling quality captured by CMOS sensor. Quantitative and qualitative evaluations have been demonstrated that our algorithm not only fully takes advantage of Convolutional Neural Networks (CNNs) to improve the image quality, but also performs better than previous GAN algorithms for super-resolution task.

On February 28th, 2023, Spanish Royal Decree 150/2023 as published, approving the plans for the management of the maritime space of the five Spanish marine demarcations. This Royal Decree Law inaugurates the Planning of the Maritime Space in Spain. Terrestrial Space Planning is very advanced, both in the legislation and in the instruments that are enabled to organize this space, from the national scale to the municipal scale, passing through the regional, provincial, and supra-municipal scales. Naturally, both Planning must converge and thus speak of an Integrated Space Planning. In some of the countries that we can take as global references, this convergence in the form of integration is taking place. On the other hand, and within the context of climate change, coastal cities will be the most affected, both by the potential rise in sea level and by the increasingly continuous and greater extreme events. Integrated Space Planning is postulated as the most effective tool to carry out adequate territorial and urban planning of our coastal cities, as well as to analyse the influence and possible corrective measures to apply against the effects produced by climate change.

Spatial relations between tumor cells and host-infiltrating cells are increasingly important in both basic science and clinical research. In this study we have tested the feasibility of using standard methods of immunohistochemistry (IHC) in a multiplex staining system using a newly developed set of chromogenic substrates for the peroxidase and alkaline phosphatase enzymes. Using this approach we have developed a set of chromogens characterized by 1) providing fine cellular detail, 2) non-overlapping spectral profiles, 3) absence of interactions between chromogens, 4) stable upon storage, and 5) compatible with current standard immunohistochemistry practices. When viewed microscopically under brightfield illumination the chromogens yielded the following colors; red, black, blue, yellow, brown, and green. By selecting compatible color combinations we have shown feasibility for four-color multiplex staining. Depending on the particular type of analysis being performed, visual analysis, without the aid of computer assisted image analysis, was sufficient to differentiate up to four different markers.

This paper reviews recent literature on Spatial Data Infrastructure (SDI) for remote sensing, aiming to provide a comprehensive analysis of the state-of-the-art practices, challenges, and future directions. It also tries to find out if current projects and initiatives involving the exploitation of satellite remote sensing are still framed in the SDI concepts.

The determination of the three-dimensional structure is a key step for the identification of new targets as well as the rational design of bioactive compounds. Herein, we report the synthesis and the structural elucidation of novel tetrameric macrocycles. Measurements were taken in solid and solution states with the help of X-ray scattering and NMR spectroscopy. The investigations made will help to find diverse applications for this new, promising compound class.

Technologies around the world produce and interact with geospatial data instantaneously, from mobile web applications to satellite imagery that is collected and processed across the globe daily. Big raster data allows researchers to integrate and uncover new knowledge about geospatial patterns and processes. However, we are also at a critical moment, as we have an ever-growing number of big data platforms that are being co-opted to support spatial analysis. A gap in the literature is the lack of a robust framework to assess the capabilities of geospatial analysis on big data platforms. This research begins to address this issue by establishing a geospatial benchmark that employs freely accessible datasets to provide a comprehensive comparison across big data platforms. The benchmark is a critical for evaluating the performance of spatial operations on big data platforms. It provides a common framework to compare existing platforms as well as evaluate new platforms. The benchmark is applied to three big data platforms and reports computing times and performance bottlenecks so that GIScientists can make informed choices regarding the performance of each platform. Each platform is evaluated for five raster operations: pixel count, reclassification, raster add, focal averaging, and zonal statistics using three different datasets.

This paper characterizes the influence of synoptic-scale air mass conditions on spatial and temporal patterns of precipitation in North Carolina over a 16-year period (2003-2018). National Center for Environmental Prediction Stage IV multi-sensor precipitation estimates were used to describe seasonal variations in precipitation in the context of prevailing air mass conditions classified using the spatial synoptic classification system. Spatial analyses identified significant clustering of high daily precipitation amounts distributed along the east side of the Appalachian Mountains and along the coastal plains. Significant and heterogeneous clustering was prevalent in summer months and tended to coincide with land cover boundaries and complex terrain. The summer months were dominated by maritime tropical air mass conditions whereas dry moderate air mass conditions prevailed in the winter, spring, and fall. Between the three geographic regions of North Carolina, highest precipitation amounts were received in western North Carolina during the winter and spring, and in eastern North Carolina in the summer and fall. Central North Carolina received the least amount of precipitation; however, there was substantial variability between regions due to prevailing air mass conditions. There was an observed shift toward warmer and more humid air mass conditions in the winter, spring, and fall months throughout the study period (2003-2018), indicating a shift toward air mass conditions conducive to higher daily average rain rates in North Carolina.

The Schelling model of segregation allows for a general description of residential movements in an environment modeled by a lattice. The key factor is that occupants change positions until they are surrounded by a designated minimum number of similarly labeled residents. An analogy to the Ising model has been made in previous research, primarily due the assumption of state changes being dependent upon the adjacent cell positions. This allows for concepts produced in statistical mechanics to be applied to the Schelling model. Here is presented a methodology to estimate the entropy of the model for different states of the simulation. A Monte Carlo estimate is obtained for the set of macrostates defined as the different aggregate homogeneity satisfaction values across all residents, which allows for the entropy value to be produced for each state. This produces a trace of the estimated entropy value for the states of the lattice configurations to be displayed with each iteration. The results show that the initial random placements of residents have larger entropy values than the final states of the simulation when the overall homogeneity of the residential locality is increased.

This paper studies the spatial joint evolution of cooperative behavior and a partially assortative matching institution that protects cooperators. We consider cooperation as characterized by a cultural trait transmitted via an endogenous socialization mechanism a la Bisin and Verdier (2001) and we assume that such trait can diffuse randomly in space due to some spatial noise in the socialization mechanism. Using mathematical techniques from reaction-diffusion equations theory, we show that, under some conditions, an initially localized domain of preferences for cooperation can invade the whole population and characterize the asymptotic speed of diffusion. We consider first thecase with exogenous assortativeness, and then endogeneize the degree of social segmentation in matching, assuming that it is collectively set at each point of time and space by the local community. We show how relatively low cost segmenting institutions can appear in new places thanks to the spatial random diffusion of cooperation, helping a localized cultural cluster of cooperation to invade the whole population. The endogenous assortative matching institution follows a life cycle process : appearing, growing and then disappearing once a culture of cooperation is suffciently established in the local population.

In the context of carbon emissions peak, environmental issues highlight the importance of the green economy, how does economic agglomeration release growth potential and enable the coordinated development of the economy and environment? There are few works of literature to analyze it within the framework of spatial economy. This paper constructs a theoretical model to clarify the influence mechanism of economic agglomeration on green total factor productivity (GTFP), and then uses a dynamic SDM model to test the theoretical hypothesis. This contribution has three main findings. First, there is a "U-shaped" curve relationship between economic agglomeration and GTFP, and the formation mechanism is that economic agglomeration has a threshold effect on the agglomeration externalities such as infrastructure sharing, knowledge spillover, and labor market upgrading. Second, the mismatch of industrial structure is an important reason that the economic agglomeration in this region has not produced an obvious spatial spillover effect on other regions; Relaxing restrictions on the concentration of economic activity to regional centers would contribute to the improvement of GTFP. Third, GTFP has the classic "snowball effect" in the time dimension, but has the obvious "warning effect" in the space and time dimension. Based on this, this paper believes that at the present stage, it is necessary to adapt to the layout of economic geography, promote the rational allocation of human resources in the territorial space, promote the coordination between economic agglomeration and the development goal of green economy, and at the same time, it is necessary to cultivate the cooperative linkage mechanism of green economy development and transformation among cities.

Riparian zones represent ecotones between terrestrial and aquatic ecosystems and are of utmost importance to biodiversity and ecosystem functions. Modelling/mapping of these valuable and fragile areas is needed for an improved ecosystem management, based on an accounting of changes and on monitoring of their functioning in time. In Europe, the main legislative driver behind this goal is the European Commission’s Biodiversity Strategy to 2020, on one hand aiming at reducing biodiversity loss, on the other hand enhancing ecosystem services by 2020, and restoring them as far as feasible. A model, based on Earth Observation data, including Digital Elevation Models, hydrological, soil, land cover/land use data, and vegetation indices is employed in a multi-modular and stratified approach, based on fuzzy logic and object based image analysis, to delineate potential, observed and actual riparian zones. The approach is designed in an open modular way, allowing future modifications and repeatability. The results represent a first step of a future monitoring and assessment campaign for European riparian zones and their implications on biodiversity and on ecosystem functions and services. Considering the complexity and the enormous extent of the area, covering 39 European countries, including Turkey, the level of detail is unprecedented. Depending on the accounting modus, 0.95%–1.19% of the study area can be attributed as actual riparian area (considering Strahler’s stream orders 3-8, based on the Copernicus EU-Hydro dataset), corresponding to 55,558–69.128 km². Similarly depending on the accounting approach, the potential riparian zones are accounted for about 3-5 times larger. Land cover/land use in detected riparian areas was mainly of semi-natural characteristics, while the potential riparian areas are predominately covered by agriculture, followed by semi-natural and urban areas.

The water resources policy under climate change impacts water security, which should ensure enough water of good quality for humans and nature. Integrated water management is the state-of-the-art policy support model that, after 20 years in use, failed to achieve in many countries its primary goal of water bodies' good ecological status. Here, we show that this is due to the substantial externalities the anthropocentric character of the model generates. From the historical analysis, three main results are obtained: 1) the nature-human interplay is always composed of the coexistence of two opposite behaviors of conflict and cooperation; 2) this contradiction is a dialectical, general ontological attribute; 3) on the balance of power between nature and humans, three clusters are identified: i) naturalistic; ii) dualistic; iii) anthropocentric. A novel behaviorist dialectical conflict resolution model can resolve the differences between stakeholders and natural laws. The harmonic symbiosis of humans with nature removes environmental externalities and can lead to sustainable water security. Three case studies from the literature illustrate the merits of the new dialectical model.

In this study, the distribution patterns of southern horse mackerel are examined using commercial fine-scale resolution data. Using landings by size category and VMS data from the Portuguese commercial bottom trawl fishery, which consistently targets horse mackerel, this study provides a comprehensive analysis of horse mackerel age distributions spanning a decade (2010-2020). Importantly, the study addresses potential biases in commercial effort data and establishes the usefulness of commercial bottom-trawl gear as a suitable method for sampling and evaluate southern horse mackerel stock dynamics. Ordered regression models were applied to allow for the modelling of the distribution of multiple age categories and investigate spatio-temporal migrations off the Portuguese coast. Southern horse mackerel shows a widespread age distribution range and stable abundance with indications of seasonal and spatial patterns in the distribution of specific age groups. The insights derived from this research contribute valuable knowledge for understanding the dynamics and distribution patterns of fish populations.

Super-resolution technology is important not only in bio-related fields but also in nanotechnology, particularly in the semiconductor industry, where fine patterning is required and super-resolution is essential. However, observing microstructures beyond the diffraction limit proposed by Abbe and Rayleigh is considered impossible because of diffraction in traditional optical microscopy ob-servation techniques. However, in recent years, it has been possible to observe microstructures beyond the Rayleigh criterion by analysing the phase distribution of light. This study investigated the physical reasons why phase analysis makes this new analysis technique possible using simula-tions. The results confirmed that the phase component of the zero-order diffracted light reflected from the microstructure and able to pass through the lens system contained the phase information related to the shape of the measured object. Analysis of this information demonstrates the possi-bility of realising super-resolution based on speckle interferometry.

This paper describes the optimal design of a miniature fiber-optic linear displacement sensor. It is characterized by its ability to measure displacements along a millimetric range with sub-micrometric resolution. The sensor consists of a triangular reflective grating and two fiber-optic probes. The measurement principle of the sensor is presented. The design of the sensor's triangular grating has been geometrically optimized by considering the step angle of the grating to enhance the sensor's resolution. The optimization method revealed a global optimum at which the highest resolution is obtained

The way humans use natural resources and especially freshwater, reflects their relationship with nature. It also influences the conceptual Water Resources Management (WRM) model. A historical review shows that the interplay between Humans and Nature is diachronically in constant change between two opposites: conflict and cooperation. Lessons from the past 20.000 years indicate that the WRM model is a function of two main parameters: (1) socio-economics, and (2) climate conditions. Three different Eras of the Humans-Nature relationship have been distinguished: (1) Naturalistic: Nature dominating Humans during the Last Glacial Period (100-10) kyr BC, (2) Dualistic: Nature-Humans cooperation and competition from 10 kyr BC to 1800 AD, and (3) Anthropocentric: Humans dominating Nature from 1800 AD to now. Since 2000, the Integrated WRM (IWRM) model is promoted as state-of-the-art and remains anthropocentric producing huge externalities. Its assessment during the last 20 years has given mixed results and needs to be reformulated. The new model we suggest is based on the dialectical tool for conflict resolution. It unifies Humans and Nature and enhances the social dimension of WRM. After identifying conflicts between stakeholders and the natural laws (eristic part), opposite objectives are unified to harmonize Humans with Nature (dialectical resolution). A case study of flood mitigation illustrates the eristic-dialectical methodology.

The quantification of sea surface temperature (SST) through space platforms has revolutionized how we obtain information at a global level. However, the main disadvantage of obtaining SST with satellite images consists of its inherent coarse spatial resolution. One solution could be the use of downscaling algorithms to create sequences of matrices at a higher resolution. We used the same SST data source from the MODIS-Aqua sensor at three spatial resolutions of 9 km, 4.5 km, and 1 km in the Gulf of California. Based on an open-source algorithm, the original SST images were downscaled to 4.5 km, 1 km, 500 m, 250 m, and 125 m per pixel scales. Results indicate a strong linear relationship between the original SST-MODIS data and the modeled data for all spatial resolutions. This study demonstrates the feasibility of an open-source downscaling algorithm to enhance the spatial resolution of SST images in a marginal sea.

The oral administration of (R)-3-hydroxybutyl-(R)-3-hydroxybutyrate, allows inducing a beneficial level of blood ketone bodies without the adverse effects due to the adhesion to a ketogenic diet. Several studies documented the therapeutic effectiveness of the (R)-3-hydroxybutyl (R)-3-hydroxybutyrate in treating neurodegenerative diseases as well as its boosting activity of athletic and cognitive performances during prolonged physical exercises. Further studies considering this ketone body ester for therapy of other pathologies are also underway. In the present work, we describe the synthesis of (R)-3-hydroxybutyl-(R)-3-hydroxybutyrate through the enantioselective transesterification of racemic ethyl 3-hydroxybutyrate with (R)-1,3-butanediol catalyzed by immobilized Candida antarctica lipase B (CAL-B). The enantiopure (R)-1,3-butanediol was in turn obtained from the kinetic resolution of the racemate by CAL-B catalyzed acetylation with vinyl acetate. The economy of the synthetic procedure has been improved by recycling the unreacted (S) enantiomers of the ethyl 3-hydroxybutyrate and 1,3-buatnediol after stereochemical inversion achieved by tosylation and SN2 with ammonium acetate. The overall procedure allows to incorporate up to 70% of the starting racemic reagents into the final product.

Keywords: Geobacillus thermocatenolatus; lipases; ethanolysis; ionic liquids; kinetic resolution; mandelic acid.

Osteoprotegerin (OPG) serum levels are associated with liver fibrogenesis and have been proposed as a biomarker for diagnosis. However, the source and role of OPG in liver fibrosis are unknown, as is the question whether OPG expression responds to treatment. Therefore, we aimed to elucidate the regulation of OPG production and its biological activity in human and mouse livers. OPG levels were significantly higher in lysates of human cirrhotic and mouse fibrotic livers compared to healthy livers. Hepatic OPG expression localized in cirrhotic collagenous bands in and around myofibroblasts. Single cell sequencing of murine liver cells showed hepatic stellate cells (HSC) to be the main producers of OPG in healthy livers. Using mouse precision-cut liver slices, we found OPG production induced by transforming growth factor β1 (TGFβ1) stimulation. Moreover, OPG itself stimulated expression of genes associated with fibrogenesis in liver slices through TGFβ1, suggesting profibrotic activity of OPG. Resolution of fibrosis in mice was associated with significantly lower OPG levels in livers as compared to their fibrotic counterparts.OPG stimulates fibrogenesis through TGFβ1 and is closely associated with the degree of fibrogenesis. It may therefore be a novel drug target for liver fibrosis or be used as a biomarker for treatment success of novel antifibrotics.

Digital Elevation Models (DEMs) are essential in watershed delineation, but the sensitivity of simulated runoff to DEM resolution is poorly understood. This study investigates the impact of DEM resolution on topological attributes and simulated runoff in the Mahabad Dam watershed, Iran. To delineate the watershed, DEMs with 12.5 m, 30 m, and 90 m resolutions were acquired from the ALOS PALSAR, Space Shuttle Radar Topography Mission (SRTM), and ASTER global DEM data source, respectively. Watershed and streamlines were delineated in ArcGIS, with hydrologic analyses performed using the Soil and Water Assessment Tool (SWAT). Sensitivity analysis on parameters contributing to runoff was done using Sequential Uncertainties Fitting Ver-2 (SUFI-2) Algorithm, in SWAT Calibration and Uncertainty Procedures (SWAT-CUP) software. Results showed the watershed area, reach lengths, and elevations in the watershed varied due to DEM resolutions. Higher amounts of runoff were generated when DEMs with finer resolutions were implemented. The 12.5 m DEM generated 3.48% and 0.42% more runoff compared with 90 m and 30 m DEMs, respectively. SWAT-CUP results showed the sensitivity of parameters contributing to runoff changes under different DEM resolutions. Regardless of DEM resolution, surface properties, available water capacity, and moisture levels in the soil are the most sensitive parameters. As the distribution of slope changes in different DEM resolutions, surface parameters are most affected. The findings indicate to reduce computation time and speed up computation procedures, researchers may use DEMs with coarser resolutions at the expense of minor decreases in accuracy.

Various optically active 2-hydroxyamide derivatives are produced based on the kinetic resolution of racemic 2-hydroxyamides with a diphenylacetyl component and (R)-benzotetramisole [(R)-BTM], a chiral acyl-transfer catalyst, via asymmetric esterification and acylation. It was revealed that a tertiary amide can be used with this novel protocol to achieve high selectivity [22 examples; s-value reaching over 250]. The resulting chiral compounds could be transformed into other useful structures while maintaining their chirality.

Synthetic Aperture RADAR (SAR) is a radar imaging technique in which the relative motion of the sensor is used to synthesize a very long antenna and obtain high spatial resolution. Standard SAR raw data processing techniques assume uniform motion of the satellite (or aerial vehicle) and a fixed antenna beam pointing sideway orthogonally to the motion path, assumed rectilinear. Despite SAR data processing is a well established imaging technology that has become fundamental in several fields and applications, in this paper a novel approach has been used to exploit coherent illumination, demonstrating the possibility of extracting a large part of the ancillary data information from the raw data itself, to be used in the focusing procedure. In this work an effort has been carried out to try to focus the raw SAR complex data matrix without the knowledge of anyof the parameters needed in standard focusing procedures as Range Doppler (RD) algorithm, ω - K algorithm and Chirp Scaling (CS) algorithm. All the literature references regarding the algorithms needed to obtain a precise image from raw data use such parameters that refer both to the SAR system acquisition geometry and its radiometric specific parameters. In [12], authors introduced a preliminary work dealing with this problem and able to obtain, in the presence of a strong point scatterer in the observed scene, good quality images, if compared to the standard processing techniques. In this work the proposed technique is described and performances parameters are extracted to compare the proposed approach to RD.

Multi-board electronic cases with high density and high power modules are widely used in industrial power supply management. With the improvement of case performance and miniaturization requirements, heat dissipation becomes one of the important factors to be considered in the design process. First,The existing small electronic thermal design methods focus on heat dissipation structure or heat source layout optimization,and ignores on-load test for modeling analysis. Second,The selected power module has on-load power consumption, resulting in relatively low calorific value and the effectiveness of thermal design cannot be verified. Third, The thermal lacks Intelligent monitoring and feedback control mechanism. In order to solve these problems, this paper designs a kind of heat dissipation case with intelligent temperature control based on high-power and high-density power supply array. Based on the extremely miniaturization design principle, we adopt the composite heat dissipation mode based on conduction and supplemented by forced air cooling . The case is made of magnesium and aluminum alloy with a perforated design. Finally, we compare and analyze with the existing cooling design. The results show that the case is smaller in volume, and the cooling performance parameters are slightly better than the existing case. Under the condition of high-density and high-power design, The output power of the whole system is not less than 10kw and the lowest packing-level density is not less than 47w/cm2 with high reliability, portability and practicability. It also provides technical support and prototype support for the standardized design of similar power arrays.

At the beginning of 2019, the petroleum crisis impacted many economies dependent on this industry. The Mexican government started programs to identify points and government officials involved in the gasoline stealing from PEMEX (Petróleos Mexicanos), the country’s leading government petroleum company. The programs consisted of supervising and monitoring the Mexican country network of gasoline ducts to detect points where gasoline was being stolen. Consequently, large urban regions faced a lack and shortage of gasoline. This situation generated several reactions in social media and many open data in news media. Although the government provided open data about stealing gasoline locations related to crimes, it did not analyze the collected data to identify patterns, insights, and the spatio-temporal characterization of this phenomenon. This paper presents a study to deal with the regional semantics described in the social media locations of gasoline stealing. Thus, a framework to discover the trends that emerge from social media and how it is correlated with the government’s open data is also presented—the proposed methodology used machine learning techniques based on linguistic and semantic technologies. The analysis was applied to a dataset of 24,317 geo-referenced tweets. The obtained results reflected the Mexican thinking opinion regarding discovered social topics, polarization maps, and regional insights. According to discovered trends, there were long fuel lines between 1.5 and 5 kilometers (on average) at fuel stations in different Mexican states.

Intratumor heterogeneity (ITH) is associated with therapeutic resistance and poor prognosis in cancer patients, and attributed to genetic, epigenetic, and microenvironmental factors. We developed a new computational platform, GATHER, for geostatistical modeling of single cell RNA-seq data to synthesize high-resolution and continuous gene expression landscapes of a given tumor sample. Such landscapes allow GATHER to map the enriched regions of pathways of interest in the tumor space and identify genes that have spatial differential expressions at locations representing specific phenotypic contexts using measures based on optimal transport. GATHER provides new applications of spatial entropy measures for quantification and objective characterization of ITH. It includes new tools for insightful visualization of spatial transcriptomic phenomena. We illustrate the capabilities of GATHER using real data from breast cancer tumor to study hallmarks of cancer in the phenotypic contexts defined by cancer associated fibroblasts.

Factors responsible of species distribution were intensively investigated in the past, including response at different spatial scales. The aim of the present research is to review the most relevant factors explaining chironomid species distribution focusing to factors operating at different spatial scales, such as latitude, longitude, altitude, water temperature, dissolved oxygen, nutrients acting at regional, country, water basin extension. Data including chironomid species abundances from different lentic and lotic waters from Italy and other surrounding countries were analyzed with different multivariate methods: partial canonical correspondence analysis and multiple discriminant analysis. Spatial analysis included univariate Moran’I correlograms, multivariate Mantel correlograms and Moran’s Eigenvectors Maps (MEM) calculation. The results confirmed previous conclusions, that is habitat type including different running waters reaches (kryal, krenal, rhthral, potamal) and different lake types is the most significant factor in separating chironomid assemblages and spatial factors act only as indirect influencers..

The main goal and essential parameter of laser light conversion is achieving higher laser brightness. That is the main reason why we take one light source to pump another. For every application the desired laser beam must have the highest available beam quality and highest achievable power. Usually by increasing one parameter, you incur a loss in the other. Here we present a method for delaying the reduction in beam quality by using a spatially structured optical pump for a membrane external cavity laser resonator. A slight increase in brightness is achieved under the same focusing conditions just by changing the pump intensity profile. By using a dynamically changing pump pattern a controllable output laser mode can be achieved.

Geotechnical investigation is an important site characterization process in engineering construction. Excavation pits and boreholes are popular geotechnical investigation methods for accessing subsurface soil and rock characteristics. Although they are accurate, they are limited to the discrete locations where tests are carried out. The demand for 3D representation has been increasing as an alternative for improved visualization of geotechnical investigations. This study developed a procedure for 3D modelling of geotechnical investigations using open-source software. It improves 3D visualization of geotechnical investigations and characterization of accuracy and uncertainty assessment. Presently, most geotechnical investigations do not regularly report uncertainty assessment despite its importance in risk analysis of the investigations. The procedure developed in this study was tested in a proposed site for construction of an Inland Container Depot where it depicted geotechnical soil properties with more than 80% accuracy on holdout samples. It was able to model both horizontal and vertical variations of the soil properties with quantification of uncertainty. More testing and wide applications are recommended.

Sperm gain fertilization ability and forward movement characteristics during epididymal transport. Sperm maturation is inseparable from the processing of the epididymis. Compared with other reproductive organs, relatively little is known about the epididymis. However, with the development of molecular biology and the improvement of single-cell sequence technology, we gradually realized that we should re-examine the importance of the epididymis for sperm mat-uration and for the entire male reproductive system. Recently, epididymis related reports have tended to be more regionalized and more refined. We can understand cell distribution and gene expression from the perspective of a single cell. It has been reported that different regions of the epididymis have different functions and different cell compositions, which may be determined by gene expression. Here, we comprehensively reviewed the epididymal studies. From the ana-tomical structure of the epididymis to the division of its regions, we focused on the cell compo-sition and region-specific genes differentially expressed in the epididymis. The gene expression of the epididymis extends to a series of biological processes of sperm in the epididymal cavity, and the serious effects of epididymal diseases on reproduction are discussed. Therefore, the importance of the epididymis in male reproduction is emphasized. With the maturity of single-cell spatial transcriptomics, it is hoped that the technology can be applied to epididymal research and bring about the spatiotemporal landscape of the epididymis at the single-cell level.

Monitoring is an important component of pest management, to prevent or mitigate outbreaks of native pests, and to check for quarantine organisms. Surveys often rely on trapping, especially when the target species respond to semiochemicals. Many traps are available for this purpose, but they are bulky in most cases, which raises transportation and deployment issues, and they are expensive, which limits the size and accuracy of any network. To overpass these difficulties, entomologists have used recycled material, such as modified plastic bottles, producing cheap and reliable traps but at the cost of recurrent handywork, not necessarily possible for all end-users (e.g., for national plant protection organizations). These bottle-traps have allowed very large surveys which would have been impossible with standard commercial traps, and we illustrate this approach with a few examples. Here we present, under a Creative Commons BY-SA License, the blueprint of a fan-trap, a foldable model, laser-cut from a sheet of polypropylene, that can rapidly be produced in large numbers, and could be transported and deployed in the field with very little efforts. Our first field comparisons show that fan-traps are as efficient as bottle-traps, and we describe two cases where they are being used for monitoring.

Drones are increasingly becoming a ubiquitous feature of society. They are being used for a multiplicity of applications for military, leisure, economic, and academic purposes. Their application in the latter, especially as social science research tools has seen a sharp uptake in the last decade. This has been possible due, largely, to significant developments in computerization and miniaturization which have culminated in safer, cheaper, lighter, and thus more accessible drones for social scientists. Despite their increasingly widespread use, there has not been an adequate reflection on their use in the spatial social sciences. There is need a deeper reflection on their application in these fields of study. Should the drone even be considered a tool in the toolbox of the social scientist? In which fields is it most relevant? Should it be taught as a course in the universities much in the same way that geographic information system (GIS) became mainstream in geography? What are the ethical implications of its application in the spatial social science? This paper is a brief reflection on these questions. We contend that drones are a neutral tool which can be good and evil. They have actual and potential wide applications in academia but can be a tool through which breaches in ethics can be occasioned given their unique abilities to capture data from vantage perspectives. Researchers therefore need to be circumspect in how they deploy this powerful tool which is increasingly becoming mainstream in the social sciences.

With the rapid development of urbanization and industrialization in China, environmental issues have become a knotty problem, especially issues related to air, water, and solid-waste pollution. These pollutants pose threats to the health of the population and to that of communities and have a vicious influence on the healthcare system. Additionally, pollution also exhibits spill-over effects, which means that pollution in the local region could affect the healthcare services in a neighbouring region. Therefore, it is necessary to explore the relationship between pollution and healthcare. A spatial autocorrelation analysis was conducted and spatial panel econometric models were constructed to explore the characteristics of pollution and healthcare services in China and the relationship between them using data on all 31 provinces over twelve consecutive years (2006-2017). The results showed that the utilization of healthcare services and environmental pollution were not randomly distributed; unsurprisingly, air pollution and solid-waste pollution were mainly found in parts of northern China, while water pollution was highest in southern and coastal China. In addition, environmental pollution exhibited spill-over effects on healthcare services. For example, a 1% increase in solid waste in one specific geographical unit was estimated to increase the inpatient visits per capita in adjacent counties by 0.559%. Specifically, pollution showed different degrees of influence on healthcare services, which means that the impact of environmental pollution on the number of outpatient visits is greater than on the number of inpatient visits. Our results provide the government with evidence for effectively formulating and promulgating policies, especially policies aimed at tackling spill-over effects among different regions.

The sun bear is conservation mammal in Indonesia. The ecological problems as conflict among mammals and human often happen around wildlife, the one of the case is the conflict between sun bear (helarctos malayanus) with human. In Pasaman where around the anthropogenic landscape is bounded by natural forest as sun bear habitat. In this decade, the story has recorded about ±16 incidents. The aim of this research is to geospatial modeling the area of potential conflict between sun bear- human. The method in this research is to use natural logarithmic and regression logistic. The tool is geographical information system and maximum entropy. The result of this research, there has found the distribute energy each variable landscape ecosystem. The statistical model of the potential conflict it has spread on landscape ecosystem. The average value of AUC prediction in this model is at number of 0.91. The variable contribution which affect are forest edge at number of 39.2%, the alternative food (plantation) at number of 31.4%, and forest fragmentation at number of 16.9%.

Urban beggars are social problems that are related to the poverty of citizen. In Denpasar City Bali Province, particularly in West Denpasar District, the beggars have specificity in activities of begging. Studies in this article demonstrate their specificity begging activity which can be evaluated from the spatial movement of beggars based on the place, time and the distance. Through the method of grounded research with qualitative analysis showed that: (1) the beggars have permanent objects to visit, which consist of shops, settlement and places of worship of the Muslim community, (2) begging activities performed every Friday for 6 hours from 08.00 to at 14.00, and (3) beggars not only walking, but also using public transportation to visiting the object that is relatively far from beggars lane. The findings of this study reinforces that begging has become a profession that is conducted in a structured and well-organized.

Climate change is expected to result in rising temperatures, leading to increased occurrences of extreme weather events like heat waves and cold spells. Urban planning responses are crucial for improving the adaptive capacity of cities and communities in dealing with significant temperature variations across seasons. This study aims to investigate the relationship between urban temperature fluctuations and urban morphology throughout the four seasons. Through quadrant and statistical analyses, the study identifies built-environment factors that contribute to moderate seasonal land surface temperatures (LST). The research focuses on Seoul, South Korea as a case study and calculates seasonal LST values at both the grid level (100m×100m) and street-block level, incorporating factors such as vegetation density, land use patterns, albedo, two- and three-dimensional building forms, and gravity indices for natural reserves. The quadrant analysis reveals spatial segregation between areas demonstrating high LST adaptability (cooler summers and warmer winters) and those displaying LST vulnerability (hotter summers and colder winters), with significant differences in vegetation and building forms. The spatial regression analysis demonstrates that higher vegetation density and proximity to water bodies play key roles in moderating LST, leading to cooler summers and warmer winters. Building characteristics have an invariant impact on LST across all seasons, where horizontal expansion contributes to higher LST, while vertical expansion reduces LST. These findings are consistent for both grid- and block-level analyses. The study emphasizes the flexible role of the natural environment in moderating temperatures.

The concept of transformative resilience emerges from complex recent literature and represents a way to interpret the potential opportunities to change in vulnerable territories, where a socio-economic change is required. This article extends the perspective of transformative resilience to assessing of the landscape multi-functionality of inland areas, exploring the potentials to identify a network of synergies among the different municipalities able to trigger a process of territorial resilience. A Spatial Decision Support System (SDSS) for multi-functionality landscape assessment aims to support the local actors to understand local resources and multi-functional values of the Partenio Regional Park (PRP) and surrounding municipalities, in the South of Italy, stimulating their cooperation to the management of environmental and cultural sites and the co-design of new strategies of enhancement.

Super-high (x400) magnification dermoscopy (D400) is a new non-invasive imaging technique that has been shown to add information for the differential diagnosis of melanocytic lesions in a pilot study. Our study aimed to confirm if D400 can add details for the discrimination of clinically atypical nevus and melanoma. This is a retrospective observational, multicentric study enrolling patients who received an x20 (D20) and x400 (D400) magnification dermoscopic examination of pigmented skin lesions. Dermoscopic images were retrospectively evaluated by three observers for the presence/absence of nine D20 and twenty D400 dermoscopic features defined in the previous pilot study. Univariate and multivariate analyses were carried out to find predictors of benign and malignant behaviors. At D20 atypical pigment network, blue-whitish veil, atypical vascular pattern, regression, and homogenous pattern were more frequent in melanoma than in nevi (p<0.001). At D400 melanoma showed more frequently than benign lesions melanocytes with an irregular arrangement and irregular in shape and size (p<0.001). Network with edged papillae was more frequent in benign lesions than melanomas (p<0.001). Our study confirms that D400 can identify melanocytes with an irregular arrangement and irregular in shape and size in melanomas, adding information to the conventional D20 examination.

Chitosan (CTS) is widely used in agriculture as a soil amendment, plant growth regulator and promoter of cold resistance. However, the effects of CTS on strawberry seedlings under the combined stress of high-temperature and high-light are unclear. In this study, Xuelixiang strawberry was used as a test material, and 100 mg·kg-1 CTS solution was sprayed onto the leaves. We measured the chlorophyll content, membrane peroxidation, reactive oxygen species content, antioxidant enzyme content, AsA-GSH cycle activity and other related indicators of strawberry seedling leaves under the combined stress of high-temperature and high-light and found that CTS can increase the contents of antioxidants, increase the contents of osmotic adjustment substances, increase the activity of antioxidant enzymes activity,; remove reactive oxygen species over time, reduce the damage of reactive oxygen species to photosynthetic organs and cell membranes, and improve the photosynthesis efficiency of leaves of strawberry plants under high-temperature and high-light stress, thereby reducing damage to strawberry seedlings caused by high-temperature and high-light.

In-situ injection of steam for heating of the subsurface is an efficient method for the recovery of oil and gas from oil shale where permeability typically evolves with temperature. We reported measurements on Jimusar oil shales(Xinjiang, China) at different temperatures to 600℃ and under recreated in situ triaxial stresses to obtain permeability evolution with temperature and stress. Permeability of tight oil shales evolves with temperature to a threshold temperature and peak temperature. The threshold temperature was subjected to triaxial stresses. For Jimusar oil shale, the threshold temperature ranges from 200℃ to 250℃ at ground stress of buried depth of 500m and from 350℃ to 400℃ at buried depth of 1000m. The peak temperature was almost not subjected to triaxial stress and the range is from 450℃ to 500℃ for all Jimusar samples. Pyrolysis plays an important role in permeability evolution and fundamentally changes permeability tendency and magnitude. At high temperature permeability exhibits a little reduction due to stress effect but still remains a high level due to pyrolysis. The above results show that oil shale mass can change from tight porous media into highly permeable media and oil & gas can easily flow through oil shale stratum.

Axial resolution is one of the most important characteristics of a microscope. In all microscopes, a high axial resolution is desired in order to discriminate information efficiently along the longitudinal direction. However, when studying thick samples that do not contain laterally overlapping information, a low axial resolution is desirable as information from multiple planes can be recorded simultaneously from a single camera shot instead of plane-by-plane mechanical refocusing. In this study, we increased the focal depth of an infrared microscope non-invasively by introducing a binary axicon fabricated on barium fluoride substrate close to the sample. Preliminary results of imaging thick and sparse silk fibers showed an improved focal depth with a slight decrease in lateral resolution and increase in background noise.

In this research, a novel method to investigation the transient heat transfer coefficient in a channel is suggested experimentally, in which the water flow, itself, is considered both just liquid phase and liquid-vapor phase. The experiments were designed to predict the temporal and spatial resolution of Nusselt number. The inverse technique method is non-intrusive, in which time history of temperature is measured, using some thermocouples within the wall to provide input data for the inverse algorithm. The conjugate gradient method is used mostly as an inverse method. The temporal and spatial changes of heat flux, Nusselt number, vapor quality, convection number, and boiling number have all been estimated, showing that the estimated local Nusselt numbers of flow for without and with phase change are close to those predicted from the correlations of Churchill and Ozoe (1973) and Kandlikar (1990), respectively. This study suggests that the extended inverse technique can be successfully utilized to calculate the local time-dependent heat transfer coefficient of boiling flow.

High-strength wastewaters from a variety of sources, including the food industry, domestic septage and landfill leachate, are often hauled to municipal wastewater treatment plants (WWTPs) for co-treatment. Due to their high organic loadings, these wastewaters can cause process upsets in both the WWTP’s liquid and solids treatment trains and consume organic treatment capacity, leaving less capacity available to service customers in the catchment area. A novel pre-treatment method, the Waste Activated Sludge-High Rate (WASHR) process, is proposed to optimize the co-treatment of high-strength wastewaters. The WASHR process combines the contact stabilization and sequencing batch reactor processes. It utilizes waste activated sludge from the municipal WWTP as its biomass source, allowing rapid start-up. Bench scale treatment trials of winery wastewater confirm the WASHR process can reduce loadings on the downstream WWTP’s liquid treatment and solids treatment trains. A case study approach is used to confirm the economic viability and environmental sustainability of the WASHR process compared to direct co-treatment using life cycle cost analyses and greenhouse gas emissions estimates.

Background Although high-density lipoprotein has cardioprotective effects, the association between serum high-density lipoprotein cholesterol (HDL-C) and hypertension is poorly understood. Objective We investigated whether low and high concentrations of HDL-C are associated with hypertension using a large healthcare dataset. Methods In a community-based cross-sectional study of 1,493,152 Japanese people aged 40–74 years who underwent a health checkup, blood pressures and clinical parameters, including nine HDL-C concentrations (20–110 mg/dL or over) were investigated. Results A crude U-shaped relationship was observed between the nine HDL-C concentrations and blood pressure in males (n = 830,669), while a left-to-right inverted J-shaped relationship was observed in females(n = 662,483). An age-adjusted logistic regression analysis showed J-shaped relationships (left-to-right inversion in females) between HDL-C and odds ratios for hypertension (≥140/90 mmHg), with lower limits of 60–79 mg/dL in males and 90–99 mg/dL in females, which were unchanged after adjusting for smoking, habitual exercise, alcohol consumption, and pharmacotherapy for hypertension, dyslipidemia, and diabetes. However, further adjustment for body mass index and serum triglyceride concentration revealed latent positive linear associations between HDL-C and hypertension, although the association between extremely high HDL-C (≥100 mg/dL) and hypertension was attenuated in non-alcohol drinkers. Conclusion Both low and extremely high HDL-C concentrations are associated with hypertension. The former association may be dependent on excess fat mass, which is often concomitant with low HDL-C, whereas the latter association may be dependent on frequent alcohol consumption.

Spatio-temporal aspects of data lead to critical information. Sensors capture data at all scales continually so it is imperative that useful information be extracted ubiquitously and regularly. Location plays a vital part by helping understand relations between datasets. It is crucial to link developmental works with spatial attributes and current challenge is to create an open platform that manages real-time sensor data and provides critical spatial analytics atop expert domain knowledge provided in the system. That is a two-faced problem where the solution tackles not only data from multiple sources but also runs data management platform, a spatial data infrastructure(SDI) as backbone framework able to harness sensor web(SW). The paper proposes development of such a globally shared open spatial expert system(ES), SmaCiSENS, a first of a kind geo-enabled knowledge based(KB) ES for multiple fields, smarter cities to climate modeling. SmaCiSENS is integration of SW and SDI with domain KB on data and problems, ready to infer solutions. The paper describes an architecture for semantic enablement for SW, SDI; connect interfaces, functions of SDI and SW, and sensor data application program interfaces (APIs) to better manage climate modeling, geohazard, global changes, and other vital areas of attention and action.

With the ever-increasing rate, obesity has become an epidemiological problem throughout the globe comprising about 39% of the world population as of now. Among several reasons, disruption of the gut microbial ecosystem might contribute to the pathogenesis of metabolic disorders, including obesity, metabolic syndrome, type 2 diabetes, and other associated comorbidities. Though the mechanisms related to dysbiosis are unclear, diet might play a modulating role where different dietary approaches manipulate microbial richness and abundance as well as stability. For instance, shifting of Firmicutes and Bacteroidetes ratio in the gut might have a role in association with the dietary approaches and ingestion duration. Along with altered gut microbial composition, microbial metabolites such as short-chain fatty acids (SCFA) after ingestion of non-digestible dietary starches may have an impact on host metabolism by regulating lipogenesis, gluconeogenesis, and inflammation with potential associations to health and obesity. The dietary approaches like carbohydrates, fibre, protein, and/or fat diet at various arrangements can make a shift in the composition of gut microbiota if introduced for a short period. However, the unique pattern of the gut microbes usually remains the same along with the longer period of habitual diet. Though the short-term dietary intervention or circadian rhythm influences a transient change in gut microbes, other than habitual diet, the understanding related to long-term dietary change-induced permanent alterations is minimum. Alternatively, the usage of prebiotics, probiotics as well as postbiotics could be beneficial to overcome dysbiosis. This review highlights the current knowledge and the interaction between the human intestinal microbiota and diet as a modifying factor, in obesity allowing the scientists to uncover novel targets and tools to use as customized therapy.

The cornerstone of molecular magnetism is a detailed understanding of the relationship between structure and magnetic behaviour, i.e. the development of magneto-structural correlations. Traditionally, the synthetic chemist approaches this challenge by making multiple compounds that share a similar magnetic core but differ in peripheral ligation. Changes in the ligand framework induce changes in the bond angles and distances around the metal ions which are manifested in changes to magnetic susceptibility and magnetisation data. This approach requires the synthesis of series of different ligands and assumes that the chemical/electronic nature of the ligands and their coordination to the metal, the nature and number of counter ions and how they are positioned in the crystal lattice, and the molecular and crystallographic symmetry have no effect on the measured magnetic properties. In short, the assumption is that everything outwith the magnetic core is innocent, which is a huge oversimplification. The ideal scenario would be to have the same complex available in multiple structural conformations, and this is something that can be achieved through the application of external hydrostatic pressure, correlating structural changes observed through high pressure single crystal X-ray crystallography with changes observed in high pressure magnetometry, in tandem with high pressure inelastic neutron scattering (INS), high pressure electron paramagnetic resonance (EPR) spectroscopy and high pressure absorption/emission/Raman spectroscopy. In this review, which summarises our work in this area over the last 15 years, we show that the application of pressure to molecule-based magnets can (reversibly): (1) lead to changes in bond angles, distances and Jahn-Teller orientations; (2) break and form bonds; (3) induce polymerisation/depolymerisation; (4) enforce multiple phase transitions; (5) instigate piezochromism; (6) change the magnitude and sign of pairwise exchange interactions and magnetic anisotropy and (7) lead to significant increases in magnetic ordering temperatures.

Domestic crime, conflict, and instability pose a significant threat to many contemporary governments. These challenges have proven to be particularly acute within modern-day Mexico. While there have been significant developments in predicting intrastate armed and electoral conflict in various contemporary settings, such efforts have thus far been limited in their use of spatial as well as temporal correlations, as well as in the features they have consid- ered. Machine learning, especially deep learning, has been proven to be highly effective in predicting future conflicts using word embeddings in Convolutional Neural Networks (CNN) but lacks the spatial structure and, due to the black box nature, cannot explain the importance of predictors. We develop a novel methodology using machine learning that can accurately classify future anti-government violence in Mexico. We further demonstrate that our approach can identify important leading predictors of such violence. This can help policymakers make informed decisions and can also help governments and NGOs better allocate security and humanitarian resources, which could prove beneficial in tackling this problem. Using a variety of political event aggregations from the ICEWS database alongside other textual and demographic features, we trained various classical machine learning algorithms, including but not limited to Logistic Regression, Random Forest, XGBoost, and a Voting classifier. We considered a mix of CNN + Long Short Term Memory (LSTM) networks to decode the spatial and temporal relationship in the data. The performance of all the black box deep learning models was not at par with the classical machine learning models. We also evaluated the temporal relationships in the data to identify important predictors that fuel anti-government violence along with their directions using Shapley additive values. The voting classifier, utilizing a subset of features derived from LASSO across 100 simulations, consistently surpasses alternative models in performance and demonstrates efficacy in accu- rately classifying future anti-government conflicts. Notably, Random Forest feature importance indicates that some features, including but not limited to homicides, accidents, material conflicts, and positive worded citizen information sentiments emerge as pivotal predictors in the classification of anti-government conflicts. Finally, we conclude the research by analysing the spatial structure of the data using Moran’s I index extended version for spatiotemporal data to identify the global spatial dependency and local clusters followed by modelling the data spatially and evaluating the same using Gaussian Process Boost(GPBoost). The global spatial autocorrelation is minimal, characterized by local- ized conflicts cluster within the region. Furthermore, in Phase 3, the Voting Classifier method demonstrates superior performance over GPBoost, leading to the inference that no substantial spatial dependency exists among the various locations.

Consideration of physical processes in the reference frame K' moving relative to the CMB, provided that clocks synchronization in this frame ensures the independence of time from spatial coordinates, leads to the conclusion about the existence in the K' of spatial anisotropy which should manifest itself in the dependence of physical effects on the speed vector V of the frame relative to the CМB. Some of these effects in the fields of electrodynamics and optics are considered. In particular, it is shown that weak magnetic fields proportional to the vector V should exist in this frame around motionless electric charges. Experimental verification, according to our assessment, is apparently possible.

The migration paths and distribution driving factors of heavy metals in dry and windy area polluted by their production in the North China need a further research. To address this research gap, we collected 675 soil samples, 72 atmospheric deposition samples and 20 water samples around a production area and measured its heavy metal concentrations. Results showed that the Cu, Zn, As and Pb in 0-10 cm soil layer showed a fan-shaped distribution, which was consistent with their atmospheric deposition fluxes. It indicated the distribution patterns of these heavy metals were driven by strong winds in studied area. Although Cr concentrated to the production area in the 0-10 cm soil layer, principal component analysis showed that this migration was through wind as well. The concentration of Cd in the river increased from 0.257 mg/L to 0.460 mg/L along water flowing, and caused the same distribution trend in soil near the river from upstream to downstream. Unlike the above, surface runoff should drive the Cd migration. The concentration of Pb in the river was over threshold of pollution, and also led to an accumulation in the 5-10 cm soil layer. It suggested that the migration of Pb was through both wind and surface runoff. Six studied heavy metals showed different migration behaviors, and specific control strategies for individual heavy metal should be concerned.

Incidence of COVID-19 has been associated with sociodemographic factors. We investigated variations in SARS-CoV-2 seroprevalence at sub-national levels in the Dominican Republic and assessed potential factors influencing variation in regional-level seroprevalence. Data were collected in a three-stage cross-sectional national serosurvey from June to October 2021. Seroprevalence of antibodies against the SARS-CoV-2 spike protein (anti-S) was estimated and adjusted for selection probability, age, and sex. Multilevel logistic regression was used to estimate the effect of covariates on seropositivity for anti-S and correlates of 80% protection (PT80) against symptomatic infection for ancestral and Delta strains. A total of 6,683 participants from 134 clusters in all 10 regions were enrolled. Anti-S, PT80 for ancestral and Delta strains odds ratio varied across regions, Enriquillo presented significant higher odds for all outcomes compared with Yuma. Compared to unvaccinated, receiving ≥2doses of COVID-19 vaccine was associated with a significantly higher odds of anti-S positivity (OR 85.94, [10.95-674.33]), and PT80 for ancestral (OR 4.78, [2.15-10.62]) and Delta strains (OR 3.08, [1.57-9.65]) nationally, and also for each region. Our results can help inform regional-level public health response, such as strategies to increase vaccination coverage in areas with low population immunity against currently circulating strains.

This study empirically examines the spatial spillover effect of various environmental regulations on green technology innovation using panel data from 284 county-level cities in China between 2007 and 2019. A geographical-economic spatial weight matrix is constructed, and the spatial Durbin model is employed to identify the specific characteristics of this spillover effect. The findings indicate that the spatial spillover effect of green technology innovation primarily occurs through geographical transmission. However, there is no significant spatial autocorrelation when using the economic distance weight matrix. Various types of environmental regulations influence the spatial spillover effect of green technology innovation in distinct ways. Specifically, Market-motivated environmental regulation exhibits a U-shaped relationship with the spatial spillover effect, while Command-controlled environmental regulation demonstrates an inverted U-shaped relationship, suggesting a complementary effect. Additional research shows that the upgrading of industrial structure acts as a mediator between command environmental regulation and the spatial spillover effect of green technology innovation. Government departments should comprehensively coordinate Market-motivated environmental regulation and Command-controlled environmental regulation, accurately assess the intensity of Command-controlled measures, and prevent the migration of green technology innovation elements caused by excessive regulatory measures within enterprises.

Plasmonics is the study of resonant oscillations of free electrons in metals caused by incident electromagnetic radiation. Surface plasmons can focus and steer light on the subwavelength scale. Apart from metals, plasmonic phenomena can be observed in soft matter systems such as electrolytes where resonant charge oscillations can be induced for ions in solution. Due to their larger mass, they are plasmon-active in a lower frequency regime and on a larger wavelength scale. Spatial confinement allows increasingly strong charge interactions and gives rise to nonlocality or spatial dispersion effects. These effects manifest as additional longitudinal propagation modes and are known to cause plasmonic broadening and resonance shifts in metal nanostructures. We derive and discuss the nonlocal optical response of ionic plasmons using a hydrodynamic, two-fluid model in a planar homogeneous three-layer system with electrolyte-dielectric interfaces. Studying such systems enables us to identify and understand plasmonic phenomena in biological and chemical systems.

After industrialization and the baby boom, many houses have been left vacant in many cities worldwide due to changes in the economy, socie-ty, and urban composition. The increase in vacant houses causes social problems, like the collapse of village communities, damage to urban aes-thetics, risk of crime due to vacant houses, and decrease in the value of real estate. Accordingly, policy attempts and studies to reduce and utilize vacant houses are in progress in various countries. In South Korea, the ratio of vacant houses was 6.4% of all houses as of 2021, and in Jeolla-buk-do, it was 11.6%, which is higher than the national average. Jeollabuk-do conducted a fact-finding survey on countermeasures against va-cant houses; 17,732 vacant houses (2.4%) were surveyed. The urbanization, population, and terrain of Jeollabuk-do, consisting of 14 cities and counties, were considered. The ratios, types, grades, and spatial autocorrelations of vacant houses were analyzed after classification into city (fo-cus, small, and medium) and county (plains and mountains) areas. There were significant differences in the averages of the ratios, grades, and spatial autocorrelations between city and county areas. Therefore, policy establishment for vacant house management and countermeasures re-quires consideration of the areas and types of vacant houses.Keywords: : vacant house; spatial autocorrelation; fact-finding survey

Land cover data are important basic data for earth system science and other fields. Multi-source remote sensing images have become the main data source for land cover classification. There are still many uncertainties in the scale effect of image spatial resolution on land cover classification. Since it is difficult to obtain multiple spatial resolution remote sensing images of the same area at the same time, the main current method to study the scale effect of land cover classification is to use the same image resampled to different resolutions, however errors in the resampling process lead to uncertainty in the accuracy of land cover classification. To study the land cover classification scale effect of different spatial resolutions of multi-source remote sensing data, we selected 1 m and 4 m of GF-2, 6 m of SPOT-6, 10 m of Sentinel-2 and 30 m of Landsat-8 multi-sensor data, and explored the scale effect of image spatial resolution on land cover classification from two aspects of mixed image element decomposition and spatial heterogeneity. For the study area, we compared the classification obtained from GF-2, SPOT-6, Sentinel-2, and Landsat-8 images at different spatial resolutions based on GBDT and RF. The results show that (1) GF-2 and SPOT-6 had the best classification results, and the optimal scale based on this classification accuracy was 4–6 m; (2) the optimal scale based on linear decomposition depended on the study area; (3) the optimal scale of land cover was related to spatial heterogeneity, i.e., the more fragmented and complex was the space, the smaller the scale needed; and (4) the resampled images were not sensitive to scale and increase the uncertainty of the classification. These findings have implications for land cover classification and optimal scale selection, scale effects and landscape ecology uncertainty studies.

Tuberculosis (TB), an infectious airborne disease caused by Mycobacterium tuberculosis (Mtb), is a serious public health threat reported as the leading cause of morbidity and mortality worldwide. South Africa is a high TB burden country with TB being the highest infectious disease killer. The study investigated the distribution and clustering of Mtb mutations and spoligotypes in rural Eastern Cape Province. The Mtb isolates included were 1,157 from DR-TB patients and analysed by LPA followed by spoligotyping of 441 isolates, of these, 36 were whole genome sequenced. Distribution of mutations and spoligotypes was done by spatial analysis and clustering analysis was done by Bayesian model-based clustering of allele frequencies at heterozygous sites, using Mclust package in R. The rpoB gene had highest number of mutations. The distribution of rpoB and katG mutations was more prevalent in four health care facilities, inhA mutations were more prevalent in three healthcare facilities and heteroresistant isolates were more prevalent in five healthcare facilities. The Mtb was genetically diverse with Beijing more prevalent and largely distributed. Spatial analysis and mapping of gene mutations and spoligotypes revealed better picture of distribution. Clustering of isolates indicates that there is transmission of mixed infection in this area.

Dengue infection is one of the most important vector-borne diseases worldwide and is a significant public health problem in the tropics. Mosquito control continues to be the primary approach to reducing the disease burden and the dengue virus (DENV) spread. Aside from the traditional larviciding and adulticiding interventions, autodissemination using pyriproxyfen-treated (AD-PPF) ovitraps is one of the promising methods to complement existing vector control strategies. Our paper assessed the efficacy of AD-PPF in reducing DENV infection in two barangays in Parañaque City. Using saliva samples from the participants from both the control and intervention sites, we collected the seroprevalence data for three months in each of the two years. Spatial analysis was conducted to determine hotspot areas and identify DENV infection distributions across the trial periods. Results showed that the intervention site was identified as having clustering of DENV infection in Month 0 of Year 1 and shifted to random dispersion of dengue cases at the end of Month 3 in Year 2. The disappearance of the clustering of the intervention site translates to a decrease in the cases of DENV infection relative to the control site. Furthermore, we also identified that DENV infection transmission occurs at a small-scale level that did not go beyond 86 meters. In conclusion, AD-PPF is suggested to be an effective strategy and may be used as an additional vector control approach, albeit in its short-term implementation.

Spatial crowdsourcing emerges as a new computing paradigm that enables mobile users to accomplish spatio- temporal tasks in order to solve human-intrinsic problems. Existing crowdsourcing systems critically use centralized servers for interacting with workers and making task assignment decisions. These systems are hence susceptible to issues such as the single point of failure and the lack of operational transparency. Prior work, therefore, turns to blockchain-based decentralized crowdsourcing systems, yet still suffers from problems of lacking efficient task assignment scheme, requiring a deposit to an untrusted system, low block generation speed, and high transaction fees. To address these issues, we design a blockchain-based decentralized framework for spatial crowdsourcing, which we call SC-EOS. Our system does not rely on any trusted servers, while providing efficient and user-customizable task assignment, low monetary cost, and fast block generation. More importantly, it frees users from making a deposit into an untrusted system. Our framework can also be extended and applied to generic crowdsourcing systems. We implemented the proposed system on the EOS blockchain. Trace-driven evaluations involving real users show that our system attains the comparable task assignment performance against a clairvoyant scheme. It also achieves 10× cost savings than an Ethereum-based implementation.

In this theoretical study we report on molecular electrostatic potential (MEP) of titled molecules confined by repulsive potentials of cylindrical symmetry mimicking a topology. Our calculations show that the spatial restriction significantly changes the picture of MEP of molecules in quantitative and qualitative sense. In particular, the drastic changes of MEP as a function of the strength of spatial confinement are observed for the BrCN molecule. This preliminary study is the first step in the investigations of the behavior of MEP of molecular systems under the orbital compression.

In this article we propose an application of humanitarian logistics theory to build a supportive framework for economic reactivation and pandemic management based on province vulnerability against COVID-19. The main research question is: which factors are related to COVID-19 mortality between Peruvian provinces? We conduct a spatial regression analysis to explore which factors determines the differences in COVID-19 cumulative mortality rates for 189 Peruvian provinces up to December 2020. The most vulnerable provinces are characterized by having low outcomes of long-run poverty and high population density. Low poverty means a high economic activity that leads to more deaths of COVID-19. There is a lack of supply of a set of relief goods defined as Pandemic Response and Recovery Supportive Goods and Services (PRRSGS). These goods must be delivered in order to mitigate the risk associated to COVID-19. A supportive framework for economic reactivation can be built based on regression results and a delivery strategy can be discussed according to the spatial patterns that we found for mortality rates.

This paper uses the spatial analysis software GeoDa as a tool, takes GRP (Gross regional product) of Sichuan Province in 2012 and 2018 as the dependent variable, and takes the city (autonomous prefecture) factor-driven, investment-driven and innovation-driven indicators as the dependent variable to explore the impact of innovation activities on regional economic development and the spatial distribution characteristics of regional economy. Through the comparison of the global correlation and local correlation, this paper explores the crux of the regional economic polarization and unbalanced development, and puts forward some measures to solve the existing economic development problems, such as cultivating and improving the regional industrial dependence, accelerating the regional transportation accessibility and convenience, and constructing the regional collaborative innovation system, So as to achieve the strategic goal of the construction of innovative Province in Sichuan Province.

This research has critically argued that a vigilant combination of flexibility and certainty in spatial planning can bring about the most optimum planning outcomes. Therefore, to reproachfully evaluate the core argument, this research has tried to empirically respond to the research question of which balance of government intervention and market freedom produces the optimal economic, social and spatial outcomes. This research question has been further translated into an associated central hypothesis i.e., a hybrid planning system with an optimal balance between discretionary and regulatory planning approach can bring about the desired economic, social, and spatial outcomes.

The COVID-19 pandemic has caused ~ 2 million fatalities. Significant progress has been made in advancing our understanding of the disease process, one of the unanswered questions, however, is the anomaly in the case/mortality ratio with Mexico as a clear example. Herein, this anomaly is explored by spatial analysis and whether mortality varies locally according to local factors. To address this, hexagonal cartogram maps (hexbin) used to spatially map COVID-19 mortality and visualise association with patient-level data on demographics and pre-existing health conditions. This was further interrogated at local Mexico City level by choropleth mapping. Our data show that the use of hexagonal cartograms is a better approach for spatial mapping of COVID-19 data in Mexico as it addresses bias in area size and population. We report sex/age-related spatial relationship with mortality amongst the Mexican states and a trend between health conditions and mortality at the state level. Within Mexico City, there is a clear south, north divide with higher mortality in the northern municipalities. Deceased patients in these northern municipalities have the highest pre-existing health conditions. Taken together, this study provides an improved presentation of COVID-19 mapping in Mexico and demonstrates spatial divergence of the mortality in Mexico.

Colombia has one of the largest numbers of internally displaced populations in the world and recently entered a period of post-conflict. These socio-political processes and trends have increased the migration of people towards cities and accordingly are affecting the distribution and occurrence of tropical diseases in its urban and peri-urban areas. Studies have suggested that many human phenomena such as urbanization scale according to the size of human populations regardless of cultural context. But other studies show that health epidemics such as malarial and human immunodeficiency virus infections, follow a scale-free distribution in terms of population size and density. We explore these relationships and dynamics in a tropical context using statistical analyses and available geospatial data to identify the scale dynamics between urbanization processes and disease transmission in Colombia. We found that rural populations and certain disease dynamics were described by power-laws that are frequently mentioned in urbanization studies. However, we found that malaria presented higher intensity of infection in human settlements of less than 50,000 individuals, particularly for ethnic indigenous populations. Results indicate that epidemics and urbanization dynamics do indeed follow scales in Colombia; findings that differ from previous epidemiological studies such as those for malarial infection. Additionally, we identified trends showing that malarial infections become endemic in peri-urban areas. Targeting such peri-urban locations and certain demographic groups are key for managing public health issues in the urbanizing tropics.

Prior to lockdown the spread of COVID-19 in UK is found to be exponential, with an exponent α=0.207 In case of COVID-19 this spreading patterns is quantitatively better described with mobility-driven SIR-SEIR model [2] rather than the homogenous mixing models Lockdown has dramatically slowed down the spread of COVID-19 in UK, and even more significantly has changed the growth in the total number of infected from exponential to quadratic. This significant change is due a transition from a mobility-driven epidemic spreading to a spatial epidemic which is dominated by slow growth of spatially isolated clusters of infected population. Our results strongly indicated that, to avoid a return to exponential growth of COVID-19 (also known as “second wave”) mobility restrictions should not be prematurely lifted. Instead mobility should be kept restricted while new measures, such as wearing mask and contact tracing, get implemented in order to allow a safe exit from lockdown.

The primary measure of the quality of sea surface temperature (SST) fields obtained from satellite-borne infrared sensors has been the bias and variance of matchups with co-located in-situ values. Because such matchups tend to be widely separated, these bias and variance estimates are not necessarily a good measure of small scale (several pixels) gradients in these fields because one of the primary contributors to the uncertainty in satellite retrievals is atmospheric contamination, which tends to have large spatial scales compared with the pixel separation of infrared sensors. Hence, there is not a good measure to use in selecting SST fields appropriate for the study of submesoscale processes and, in particular, of processes associated with near-surface fronts, both of which have recently seen a rapid increase in interest. In this study, two methods are examined to address this problem, one based on spectra of the SST data and the other on their variograms. To evaluate the methods, instrument noise was estimated in Level-2 VIIRS and AVHRR SST fields of the Sargasso Sea. The two methods provided very nearly identical results for AVHRR: along-scan values of approximately 0.18 K for both day and night and along-track values of 0.21 K also for day and night. By contrast, the instrument noise estimated for VIIRS varied by method, scan geometry and day-night. Specifically, daytime, along-scan (along-track), spectral estimates were found to be approximately 0.05 K (0.08 K) and the corresponding nighttime values of 0.02 K (0.03 K). Daytime estimates based on the variogram were found to be 0.08 K (0.10 K) with the corresponding nighttime values of 0.04 K (0.06 K). Taken together: AVHRR instrument noise is significantly larger than VIIRS instrument noise, along-track noise is larger than along-scan noise and daytime levels are higher than nighttime levels. Given the similarity of results and the less stringent preprocessing requirements, the variogram is the preferred method although there is a suggestion that this approach overestimates the noise for high quality data in dynamically quiet regions. Finally, simulations of the impact of noise on the determination of SST gradients show that on average the gradient magnitude for typical ocean gradients will be accurately estimated with VIIRS but substantially overestimated with AVHRR.

Underwater image often exhibit detail blurring and color distortion due to light scattering, impurities, and other influences, obscuring essential textures and details. This presents a challenge for existing super-resolution techniques in identifying and extracting effective features, making high-quality reconstruction difficult. This research aims to innovate underwater image super-resolution technology to tackle this challenge. Initially, an underwater image degradation model was created by integrating random subsampling, Gaussian blur, mixed noise, and suspended particle simulation to generate a highly realistic synthetic dataset, thereby training the network to adapt to various degradation factors. Subsequently, to enhance the network's capability to extract key features, improvements were made based on the symmetrically structured Blind Super-Resolution Generative Adversarial Network (BSRGAN) model architecture. An attention mechanism based on energy functions was introduced within the generator to assess the importance of each pixel, and a weighted fusion strategy of adversarial loss, reconstruction loss, and perceptual loss was utilized to improve the quality of image reconstruction. Experimental results demonstrate that the proposed method achieved significant improvements in Peak Signal-to-Noise Ratio (PSNR) and Underwater Image Quality Measure (UIQM) by 0.85 dB and 0.19, respectively, significantly enhancing the visual perception quality and indicating its feasibility in super-resolution applications.

Claims arising frequently in the Architecture, Engineering and Construction (AEC) industry usually result in disputes, leading to all sorts of negative implications for a project. Claims need to be managed efficiently, and in case they evolve into disputes, they need to be resolved as soon as possible so that the construction process can resume. In this paper, a bibliometric review is carried out to explore the existing literature regarding construction claims and dispute resolution methods employed in construction projects. Using VOSviewer and the Scopus database, relevant literature is retrieved and analyzed using keyword searches, including "construction claim” and "construction management". The detected research themes provide future researchers with potential research directions. A gap in the research regarding the emergence of terms such as “blockchain”, “smart contracts”, and "building information modelling (BIM)" appearing only recently after 2020 in the literature regarding the construction claims and disputes research area was determined. Therefore, a content analysis of the most recent publications employing these and other novel technologies is conveyed. Ultimately, the main research trends and potential research directions for assisting researchers and construction professionals in their efforts to address construction claims and disputes in sustainable and efficient ways are discussed.

This academic article examines the effectiveness of international humanitarian intervention in conflict zones. Humanitarian intervention refers to the use of military, diplomatic, or economic measures by external actors to protect civilians, promote human rights, and alleviate suffering in areas affected by armed conflict. The research employs a comprehensive approach, incorporating content analysis, case study, and historical analysis in its methodology. It explores the key challenges faced by international actors in implementing humanitarian interventions and evaluates their impact on conflict resolution and post-conflict reconstruction. Through this thorough analysis of case studies and scholarly literature, this article contributes to the ongoing debate surrounding the efficacy of international humanitarian intervention.

There has been considerable progress in implicit neural representation to upscale an image to any arbitrary resolution. However, existing methods are based on defining a function to predict the RGB value from just four specific loci. Relying on just four loci is insufficient as it leads to losing fine details from the neighboring region(s). We show that by taking into account the semi-local region leads to an improvement in performance. In this paper, we propose applying a new technique called Overlapping Windows on Semi-Local Region (OW-SLR) to an image to obtain any arbitrary resolution by taking the coordinates of the semi-local region around a point in the latent space. This extracted detail is used to predict the RGB value of a point. We illustrate the technique by applying the algorithm to the Optical Coherence Tomography-Angiography (OCT-A) images and show that it can upscale them to random resolution. This technique outperforms the existing state-of-the-art methods when applied to the OCT500 dataset. OW-SLR provides better results for classifying healthy and diseased retinal images such as diabetic retinopathy and normals from the given set of OCT-A images. The project page is available at https://rishavbb.github.io/ow-slr/index.html

Deep learning has been introduced to single-image super-resolution (SISR) in the last decade. These techniques have taken over the benchmarks of SISR tasks. Nevertheless, most architectural designs necessitate substantial computational resources, leading to a prolonged inference time on embedded systems or rendering them infeasible for deployment. This paper presents a comprehensive survey of plausible solutions and optimization methods to address this problem. Then, we propose a pipeline that aggregates the latter in order to enhance the inference time without significantly compromising the perceptual quality. We investigate the effectiveness of the proposed method on a lightweight GAN-based perceptual-oriented model as a case study. The experimental results show that our proposed method leads to significant improvement in the inference time on both Desktop and Jetson Xavier NX, especially for higher resolution input sizes on the latter, thereby making it deployable in practice.

Is it possible to develop a meaningful measure for the complexity of a simulation model? Algorithmic information theory provides concepts that have been applied in other areas of research for the practical measurement of object complexity. This article offers an overview of complexity from a variety of perspectives and provides a body of knowledge with respect to the complexity of simulation models. Key terms of model detail, resolution, and scope are defined. An important concept from algorithmic information theory, Kolmogorov complexity, and an application of this concept, normalized compression distance, are used to indicate the possibility of measuring changes in model detail. Additional research in this area can advance the modeling and simulation body of knowledge toward the practical application of measuring simulation model complexity. Examples show that KC and NCD measurements of simulation models can detect changes in scope and detail.

These days, numerous organizations and Analysis Centers (AC) offer various Ambiguity Resolution (AR) products using various methodologies. To use it for time-frequency transfer, there is no associated study. This paper chooses 16 MGEX stations with external high-precision atomic clocks to constitute 15 international time comparison links and uses AR products data from CNES, SGG, CODE, and PRIDE laboratory, using three ambiguity-fixed strategies, to thoroughly evaluate the effects of various strategies and AR products for high-precision time-frequency transfer. We reach the following results by using the IGS final clock product as a reference and comparing it to ambiguity-float. With various ambiguity-fixed procedures, the time stability STD of time transfer is increased for a single GPS, and the improvement ranges from 10% to 40%. The frequency stability has barely improved; up to 40%, the most notable improvement comes from FCB with GRM products. The time stability STD of combinations has improved after the addition of the Galileo system compared to the single GPS, and the improvement ranges from 2% to 9%. Most strategies have improved, while a few techniques have weakened with the GEC (GPS+Galileo+BDS) combination. We feel that the stability has not significantly increased with the system's increase within short-term stability after comparing multiple groups of linkages.

Apoptosis, the programmed and intentional death of senescent, damaged, or otherwise superfluous cells, is the natural end-point for most cells within multicellular organisms. Apoptotic cells are not inherently damaging, but if left unattended they can lyse through secondary necrosis. The resulting release of intracellular contents drives inflammation in the surrounding tissue and can lead to autoimmunity. These negative consequences of secondary necrosis are avoided by efferocytosis—the phagocytic clearance of apoptotic cells. Efferocytosis is a product of both apoptotic cell and efferocyte mechanisms, which cooperate to ensure the rapid and complete removal of apoptotic cells. Herein, the processes used by apoptotic cells to ensure their timely removal, and the receptors, signaling, and cellular processes used by efferocytes to identify, remove, and process the apoptotic cells, are reviewed.

Automatic control to any of robot manipulators, some kind of issues are being observed. A numerical method for solution generation to the inverse kinematics problem of redundant robotic manipulators is presented to obtain the smoothest algorithm as possible, leading to a robust iterative method. After the primary objective of the reachability of end-effectors to the target point is achieved, the aim is set to resolve the redundant degrees of freedom of redundant manipulator. This method is numerically stable since it converges to the correct answer with virtually any initial approximation, and it is not sensitive to the singular configurations of the manipulator. In addition, this technique is computationally effective and able to apply for serial manipulators with any DOF applications. A planar 3R-DOF serial link redundant manipulator is considered as exemplar problem for solving. Also, the continuum approach for resolving more complex structure with variable DoF is illustrated here and their brief applicability to support surgeries and adaptive use of artificial linkage moments is also calculated.

Based on the Graph Model of Conflict Resolution (GMCR), a two-stage decision framework is developed to reveal the essence of brownfield incidents and facilitate the resolution of brownfield conflicts caused by the incidents. More particularly, the forward GMCR is utilized in Stage I, the negotiation stage, to simulate the evolution of a brownfield conflict (BC) and predict its potential resolution via stability analysis. If no acceptable equilibrium can be obtained, the BC progresses into Stage II, the third-party-intervention stage, where the inverse GMCR is used to assist a third party in intervening the conflict to achieve a desirable outcome. To illustrate the practicality of this framework, a recent BC occurred in Changzhou, China, is taken as a case study. Invaluable insights are provided through the computation and investigation of the corresponding preference relationships.