Original and improved version of the Hardy Cross iterative method with related modifications are today widely used for calculation of fluid flow through conduits in loops-like distribution networks of pipes with known node fluid consumptions. Fluid in these networks is usually natural gas for distribution in the municipalities, water in waterworks or hot water in district heating system, air in the case of ventilation systems in buildings or mines, etc. Since, the resistances in these networks depend of flow, problem is not linear like in electrical circuits, and iterative procedure must be used. In both version of the Hardy Cross method, in original and in the improved one, initial results of calculation in iteration procedure is not flow, but rather the correction of flow. Unfortunately, these corrections should be added to or subtracted from a flow calculated in previous iteration according to complicate algebraic rules. After the here presented node-loop method, final results in each of the iterations is flow directly rather than flow correction. In that way complex algebraic scheme for sign of flow correction is avoided, while the final results still remain unchanged. Numbers of required iterations for the same results are comparable with the improved Hardy Cross method.

Patterns of age and growth of a sedentary damsel fish Acanthochromis polyacanthus were tested over a latitudinal range of approximately 10 degrees (1,200 km) on the Great Barrier Reef, Australia. Within latitudes these patterns were also compared on reefs across a continental shelf that ranged in width from 52 to 128 km. Although variation in length-max, growth, age-max and the von-Bertalanffy metrics of L, and K were found within and among latitudes, greatest variation in some demographic characteristics were found across the shelf regardless of latitude. Fish were always smaller at inner shelf reefs and grew more slowly when compared to mid and outer shelf reefs. The oldest fish collected was 11 years old and, there were no consistent variation in age-max among distances from shore. On outer reefs, there was a linear relationship with age-max and latitude. This ‘tropical gradient’ of age only explained 34% of the variation, further this was not found when the oldest 10% of fish were considered. Fish only reached an age-max of 6 years on the southern-most reefs. There was a trend for a smaller L with latitude but, it was not significant and L did not vary predictably with water temperature. The sampling of MPAs did not confound the resultant patterns. Instantaneous mortality rates were 0.245-0.685, highest at inner reefs and showed no consistent MPA-related patterns. Our study suggested that the mid and outer shelf waters of the GBR appeared best suited for growth of A. polyacanthus. In conclusion, position on continental shelves and related local environmental conditions needs to be considered in spatial models of growth.

Software defect prediction is an important means to guarantee software quality. Because there are no sufficient historical data within a project to train the classifier, cross-project defect prediction (CPDP) has been recognized as a fundamental approach. However, traditional defect prediction methods using feature attributes to represent samples, which can not avoid negative transferring, may result in poor performance model in CPDP. This paper proposes a multi-source cross-project defect prediction method based on dissimilarity space ( DM-CPDP). This method first uses the density-based clustering method to construct the prototype set with the cluster center of samples in the target set. Then, the arc-cosine kernel is used to form the dissimilarity space, and in this space the training set is obtained with the earth mover’s distance (EMD) method. For the unlabeled samples converted from the target set, the KNN algorithm is used to label those samples. Finally, we use TrAdaBoost method to establish the prediction model. The experimental results show that our approach has better performance than other traditional CPDP methods.

The formability and failure behavior of TRIP steel blanks were investigated through various stress states. The forming limit diagram (FLD) at fracture is constructed both experimentally and numerically. Numerical studies are performed to evaluate the applicability of different damage criteria in predicting the FLD as well as complex cross-die deep drawing process. The fracture surface and numerical results revealed that the material failed in a different mode for different strain path. Therefore, Tresca model which is based on shear stress accurately predicted the conditions where shear had the profound effect on the damage initiation, whereas Situ localized necking criterion was able to calculate the conditions which localization was dominant.

Regional anesthesia in postoperative pain management have developed in recent years, especially with the advent of fascial plane blocks. This study aims to compare the ultrasound-guided bilateral erector spinae plane block (ESPB) versus bilateral transversus abdominis plane block (TAPB) on postoperative analgesia after laparoscopic or robotic urologic surgery. This was a retrospective observational study; 97 patients (ESPB-group) received bilateral ultrasound-guided ESPB with 20 mL of ropivacaine 0.375% plus 0.5 mcg/kg of dexmedetomidine in each side at the level of T7-T9, and 93 patients (TAPB-group) received bilateral ultrasound-guided TAPB with ropivacaine 0.375% or 0.25%. The primary outcome was post-operative numeric rating scale (NRS) pain score, which was significantly lower in the ESPB-group on postoperative days 0, 2, and 3 (p=0.012, p=0.016 and p=0.004). Concerning the secondary outcomes, consumption of ropivacaine was significantly lower in ESPB-group (p<0.001) and the total amount of analgesic rescue doses was significantly lower in the ESPB-group than TAPB-group in postoperative days from 2 to 4 (1 vs 3, p>0.001). Incidence of postoperative nausea and vomiting was higher in the TAPB-group and no block related complications were observed. We conclude that ESPB provide better postoperative pain control with less consumption of local anesthetic and less total rescue analgesic therapies.

This research presents the Cross-Cultural Intelligent Language Learning System (CILS), a novel approach integrating Artificial Intelligence (AI) into language education to enhance cross-cultural communication. CILS utilizes advanced AI technologies to provide adaptive, personalized learning experiences that cater to the unique linguistic and cultural backgrounds of each learner. By dynamically adjusting content and methodology, CILS significantly improves linguistic proficiency and cultural understanding, essential for effective global interactions. The implementation of CILS in platforms such as Busuu and HelloTalk has demonstrated marked improvements in engagement and communication skills among learners. Empirical studies validate the system's effectiveness in real-world settings, showing enhanced learner performance and increased intercultural competence. Additionally, the Technology Acceptance Model (TAM) applied confirms that the usability and perceived usefulness of AI-driven systems strongly influence learner acceptance and sustained use. This study not only underscores the potential of AI in transforming language education but also highlights the critical role of cultural sensitivity in designing educational technologies.

Accurately glacier mapping is crucial for understanding climate change impacts, but existing efforts may be biased due to overlooking spatial autocorrelation during map validation. To address this, we compared several widely used machine learning algorithms as gradient boosting machines (GBM), k-nearest neighbor (KNN) and random forest (RF) with parametric logistic regression (GLM) and an unsupervised remote sensing-based method (NDSI) for mapping Peru's glacier regions in a thoughtful experimental setup. Spatial and non-spatial cross-validation methods were used to evaluate model’s performance and compared with a fully independent test set. Performance differences of up to 18% were found between bias-reduced (spatial) and overoptimistic (non-spatial) cross-validation results when compared to independent test set, emphasizing the need to consider spatial autocorrelation when using machine learning for glacier mapping. K-nearest neighbors (KNN) was the overall best model across regions consistently demonstrating the highest performance followed by logistic regression (LR) and gradient boosting machines (GBM). Our novel validation approach, accounting for spatial characteristics, provides valuable insights for glacier mapping studies and future efforts on glacier retreat monitoring. Incorporating this approach improves the reliability of glacier mapping, guiding future national-level initiatives.

The nonlocality (superdiffusion) of turbulence is expressed in the empiric Richardson t3 scaling law for the mean square of the mutual separation of a pair of particles in a fluid or gaseous medium. The development of the theory of nonlocality of various processes in physics and other sciences based on the concept of Lévy flights resulted in the idea of Shlesinger and colleagues about the possibility of describing the nonlocality of turbulence using a linear integro-differential equation with a slowly falling kernel. The close approach developed by us made it possible to establish the closeness of the superdiffusion parameter of plasma density fluctuations moving across a strong magnetic field in a tokamak to the Richardson law. In this paper, we show the possibility of a universal description of the characteristics of nonlocality of transfer in a stochastic medium (including turbulence of gases and fluids) using the Biberman-Holstein approach to the transfer of excitation of a medium by photons, generalized to take into account the finiteness of the velocity of excitation carriers. This approach enables us to propose a scaling that generalizes Richardson's t3 scaling law to the combined regime of Lévy flights and Lévy walks.

Background: Frail elderly patients are exposed to suffering the consequences of heart diseases that are not managed timely such as receiving anticoagulation to prevent stroke associated to atrial fibrillation (AF). Referral to the cardiological outpatient department can be cumbersome as it often requires repeated visits. The aim of this project was to use AF as a showcase to develop and implement CardioShare, a shared-care model where primary care leads patient management, using an easy-to-use compact Holter monitor device with asynchronous remote support from cardiologists. Methods: This complex intervention has been developed during a feasibility phase, tested in a pragmatic cluster-randomization trial (primary care clinic as clusters) and its implementation potential evaluated with an escalation test. Mixed methods were used to evaluate the impact of the intervention, comprising quantitative observations, semi-structured interviews, and workshops. Results: Between February 2020 and December 2021, 314 patients (30% frail) were included of whom 75% had AF diagnosed/not found within 13 days. More than 80% in both groups avoided referral to cardiologists. Patients felt safe and primary care clinicians satisfied. In the escalation test, 58 primary-care doctors used CardioShare to manage 93 patients over three months with remote support from four hospitals in the Capital Region of Denmark. Conclusions: CardioShare was successfully implemented for AF evaluation in primary care.

At the highest level of endurance sports, the differences in finishing times are small, so equipment is constantly being constantly improved to enhance the athletes' performance. For instance, one dominant resistive force in connection with cross-country skiing is the friction between the skis and snow and since the 1930s, research designed to understand and reduce this friction has been ongoing. The mechanisms involved in ski-snow friction include compaction, micro-ploughing, adhesion, viscosity, and water-bridging. Of these, adhesive and viscous friction have been most studied, while much less is presently known about compaction, micro-ploughing, and water-bridging. At the macro-scale, the ski-camber profile plays a key role in determining whether, with respect to friction, a particular cross-country ski is suitable for use under a given set of conditions. Through its influence on where ski-snow contact occurs, this ski-camber profile has a profound impact on adhesive and viscous friction, micro-ploughing, the formation of water bridges, and the rate of compaction. Different contact zones with different apparent areas of contact and pressure have been found to be most suitable for different conditions. In addition, the micro-scale texture of the ski base is also an important determinant of ski-snow friction. Topographical measurements of this texture can be achieved with white-light interferometer and recent characterisation has focused on the mechanical properties of contact. In numerous tribological studies the interactions between features at different scales are modelled. In most tribological systems, features on several scales influence friction and ski-snow contact is certainly no exception. Accordingly, the current investigation was designed to evaluate the multi-scale properties of different combinations of two skis with two different base textures. The real area of contact and the average interfacial separation and total average reciprocal interfacial separation between the ski and snow were taken into consideration. We found that different macro- and micro-scale properties of the ski favour different mechanisms of friction. Both the profile of the ski camber and texture of the base play decisive roles in determining viscous friction. At the same time, the texture of the ski base exerts a greater impact on the average real contact pressure, real contact area and minimal average interfacial separation between the ski and snow than does the ski-camber profile.

Coronavirus disease (COVID-19) has had devastating impacts on the global economy and public health. This study aimed to assess the level of COVID-19 vaccine acceptance, hesitancy, and associated factors among staff and students of the Federal University of Health Sciences Otukpo, Benue State, Nigeria. A web-based cross-sectional survey was conducted between November 2021 and April 2022, and data were collected and analyzed using descriptive and inferential statistics. Of the 150 completed and analyzed questionnaires, the majority of respondents (80.0%) were between 16 and 45 years old. The study found that 58.4% of participants indicated vaccine hesitancy, with skepticism about the vaccine's fast production/rollout and fear of vaccine side effects being the most common reasons for hesitation. Respondents' age, religion, and category were significant factors influencing vaccine acceptance and hesitancy (P < 0.05). The university community has a high level of awareness of COVID-19 but low vaccine acceptance, resulting in high levels of vaccine hesitancy. The study recommends that policymakers and public health officials should prioritize testing and vaccination for job categories with higher risk of exposure to COVID-19. They should provide accurate information about COVID-19 testing and vaccination and implement workplace-based testing and vaccination programs. These interventions can help to increase COVID-19 testing and vaccination uptake among the university community and mitigate the spread of COVID-19.

Acute kidney injury (AKI) is a complication that can occur after cardiac surgery and requires ongoing research in light of the exponential expansion of technological advancements and knowledge in medicine. In this study, we aim to evaluate the outcomes of treated electives of emergency aortic disease with high serum creatinine levels (SCr). Methods: The cohort includes 183 patients, all of whom have an aortic disease and whose SCr levels were checked upon admission on the first day in the intensive care unit (ICU) and upon discharge from the hospital. We examined the correlation of SCr levels with in-hospital mortality and immediate mortality at least six months after discharge as well as with cross-clamp time and bypass time.Results: A high SCr level upon admission is a significant predictive factor of n-hospital mortality (p = 0.001) but not immediate mortality (p = 0.409). A statistically significant correlation was also observed between elevated SCr level on the first day of ICU and aortic disease (p = 0.041) but not immediate mortality (p = 0.119). We observed a significant correlation between aortic disease and in-hospital mortality (p < 0.001), but no correlation was found between high SCr level on the first day of ICU and immediate mortality (p = 0.119). The cross-clamp time is statistically significant correlated with elevated SCr level (p = 0.013) and in-hospital mortality (p = 0.001) but not immediate mortality (p = 0.847). Furthermore, the bypass time is negatively correlated with a high SCr level on the first day of ICU (p = 0.090), in-hospital mortality (p = 0.410), and immediate mortality (p = 0.625). We also found that aortic disease is not correlated with elevated creatinine levels at ICU discharge (p = 0.152) or long-term mortality (p = 0.106). Conclusions: Although this study only included a small portion of the elaborate aspects of surgical and medical management developed around cardiac patients who received invasive treatment, the conclusions reached are nevertheless clearly relevant, as evidenced by the significantly correlations uncovered. In order to manage AKI after AAS and improve the outcome, the SCr level could be used as a marker for renoprotective strategy. Moving forward, these results serve as a first step in motivating us to expand the range of our research, collect newly relevant data, and use it to benefit patients.

Most pathogens are capable of infecting multiple host species and such cross-species transmission (CST) can have dramatic consequences, as highlighted by recent disease emergence events affecting human, animal and plant health. Understanding the ecological and evolutionary factors that constrain or facilitate the ability of disease agents to infect and establish in a novel host is therefore a timely and important research area. Previous work across different pathogens, including rabies virus (RABV), found that increased evolutionary distance between hosts reduces the frequency of cross-species transmission and of permanent host shifts. However, whether this effect of host relatedness still holds for transmission among recently diverged hosts, and the importance of this effect relative to other predictors, is not well understood. We addressed this question by quantifying the CST frequency of RABV between North American bat species within the genus Myotis, using a multi-decade data set containing 128 nucleoprotein (N) sequences from ten host species. For comparison, we also conducted an equivalent analysis of a RABV dataset from North American bat species comprising nine genera. We found that at the within genus scale, host relatedness failed to explain the frequency of CST events. However, CST frequency increased with overlap in species’ host range. Moreover, we found evidence of CST occurring among a higher proportion of species, and CST more frequently resulting in sustained transmission in the novel host in the Myotis dataset compared to the multi-genus dataset. Our results suggest that among recently diverged species, the ability to infect a novel host is no longer restricted by physiological barriers but instead is limited by physical contact. Our results improve predictions of where future CST events for RABV might occur and clarify the relationship between host divergence and pathogen emergence.

Delayed diagnosis and a lack of adequate care for people with autism spectrum disorder (ASD) are related to worse outcomes and quality of life. This study aimed to identify the profile of service use, barriers to access care, and factors related to those barriers in Brazilian families with children with ASD. A total of 927 families with ASD children (3-17 years) from five Brazilian regions completed an online version of the Caregivers Needs Survey. Results showed that the most used services were behavioral interventions and pharmacotherapy, while the most used professionals were neurologists, nutritionists, speech therapists, psychiatrists, psychologists, and pediatricians. The main barriers included waiting lists, costs, and the absence of services or treatment. Service use varied according to age, the region of residence, the type of health care system used, and the parents/caregivers' education. Access to behavioral interventions was more frequent among users of the private system/health insurance and families whose caregivers had higher education. The absence of specialized services/treatments was less frequent among residents of state capitals and families whose caregivers had higher levels of education. This study highlights how families with children/adolescents with ASD in Brazil face significant barriers to access care related to sociodemographic factors.

Software reliability is an important characteristic for ensuring the qualities of software products. Predicting the potential number of bugs from the beginning of a development project allows practitioners to make the appropriate decisions regarding testing activities. In the initial development phases, applying traditional software reliability growth models (SRGMs) with limited past data does not always provide reliable prediction result for decision making. To overcome this, herein we propose a new software reliability modeling method called deep cross-project software reliability growth model (DC-SRGM). DC-SRGM is a cross-project prediction method that uses features of previous projects’ data through project similarity. Specifically, the proposed method applies cluster-based project selection for training data source and modeling by a deep learning method. Experiments involving 15 real datasets from a company and 11 open source software datasets show that DC-SRGM can more precisely describe the reliability of ongoing development projects than existing traditional SRGMs and the LSTM model.

In this paper a new approximate procedure is developed for calculating the inclination angle of the end points of statically determinate beams. The method is based on the topology comparison of simple (hinge-roller combination) supported beam and a resemblant cantilever beam. Assuming that the support reactions of the beam are active forces, the virtual displacements at the points of the reaction forces are calculated. Based on these values the inclination angle is calculated. Several examples are considered and the suggested in this paper, while the procedure is applied for various types of structures and loadings. The results, obtained by the suggested numerical procedure, are compared with analytical ones, and they are in good agreement.

Naive CD4+ T cells engage cognate peptide MHC-II complexes (pMHC-IIs) to differentiate and acquire one of several T helper (Th) fates whose specific trajectories are guided by a dynamic cytokine milieu that develops in response to antigenic entity. This physiological process is often erroneously conflated with a pathological one termed Th polarization. Using the SPIRAL model, we argue here that unlike Th fate choice, innate signaling alone is insufficient to initiate Th polarization in naive CD4+ T cells, that it instead develops from pre-existing memory CD4+ T cells that express cross-reactive TCRs, and that it inevitably leads to immunopathology.

To reduce the risk of infection of SARS-CoV-2 during the commute to the clinic or due to the contact with medical staff, The American College of Obstetricians and Gynecologists recommended ar-ranging part of the appointments in the form of “telehealth”. The aim of the study was to assess the access to medical care in pregnancy during the Sars-Cov-2 pandemic and the role of telehealth in implementation of prenatal care standards. This is a cross-sectional study. The study group in-cluded 618 women that were pregnant and or gave birth during the COVID-19 pandemic in Poland. The majority of participants experienced difficulties in access to medical care because of the pandemic. Correlation between this experience and the use of hybrid healthcare model was es-tablished. However, affiliation to public or private healthcare group was irrelevant. There was no relationship between healthcare (private/public or in-person/hybrid) and implementation of the prenatal care standards. To ensure safe access to prenatal care for pregnant women, recommen-dations for a hybrid pregnancy management model should be created with detailed information for which appointments patients must be present and which can be done remotely. To reduce movement risk and interpersonal contact, all visits during which tests and screenings take place should be done in-person. Other appointments can be arranged in the form of telehealth

The part transportation efficiency is a main factor of aircraft sortie generation rate. Part transportation is used to transport spare part from base to carrier. Transportation strategy depends on both demand on carrier and inventory in transportation base. The transportation time and stochastic demand will induce fluctuations of cost and inventory. Thus, a Takagi-Sugeno fuzzy system of dynamic part transportation is established considering transportation time and stochastic demand. And a novel Takagi-Sugeno fuzzy robust control is designed for dynamic part transportation, which will keep transportation cost and part inventory stable. First of all, a fuzzy model with stochastic demand and transportation time is proposed. Then, a novel robust control with cross rule groups is conducted according to production and transportation strategy, which will reduce fluctuations induced by strategies switch. Moreover, robust stability is guaranteed and part can be supplied in time under a low cost. Finally, simulation illustrates usefulness and quickness of the novel Takagi-Sugeno fuzzy robust control. Besides, the proposed method will be useful in other transportation electrification systems with delay time and uncertainty.

We report cross-shore profile evolution at Palanga, eastern Baltic Sea where short period waves dominate. Cross-shore profile studies began directly after a significant coastal erosion caused by storm “Anatoly” in December of 1999 and continued for a year. Further measurements were undertaken sixteen years later. Cross-shore profile ∆V(x) changes were described, and cross-shore transport rates Q(x) were calculated. A K-means clustering technique was applied to determine sections of the profile with the same development tendencies. Profile evolution was strongly influenced by the depth of closure which is constrained by a moraine layer and the presence of a groyne. The method used divided the profile into four clusters: the 1st cluster in the deepest water represents profile evolution limited by the depth of closure, and the 2nd and 3rd mostly are affected by processes induced by wind, wave and sea-water level changes. The most intensive sediment volume changes were observed directly after the coastal erosion. The largest sand accumulation was in the 4th profile cluster, which includes the upper beach and dunes. Seaward extension of the dune system caused a narrowing of the visible beach which has led to an increased sand volume (accretion) being misinterpreted as erosion

Background: The methods used in low- and middle-income countries (LMICs) household surveys have not changed in four decades; however, LMIC societies have changed substantially and now face unprecedented rates of urbanisation and urbanisation of poverty. This mismatch may result in unintentional exclusion of vulnerable and mobile urban populations. We compare three survey method innovations with standard survey methods in Kathmandu, Dhaka, and Hanoi, and summarize feasibility of our innovative methods in terms of time, cost, skill requirements, and experiences. Methods: We used descriptive statistics and regression techniques to compare respondent characteristics in samples drawn with innovative versus standard survey designs and household definitions, adjusting for sample probability weights and clustering. Feasibility of innovative methods was evaluated using a thematic framework analysis of focus group discussions with survey field staff, and via survey planner budgets. Results: We found that a common household definition excluded single adult (46.9%) and migrant headed households (6.7%), as well as non-married (8.5%), unemployed (10.5%), disabled (9.3%), and studying adults (14.3%). Further, standard two-stage sampling resulted in fewer single adult and non-family households than an innovative area-microcensus design; however, two-stage sampling resulted in more tent and shack dwellers. Our survey innovations provided good value for money and field staff experiences were neutral or positive. Staff recommended streamlining field tools and pairing technical and survey content experts during fieldwork. Conclusions: This evidence of exclusion of vulnerable and mobile urban populations in LMIC household surveys is deeply concerning, and underscores the need to modernize survey methods and practices.

HDPE (high-density polyethene) plastic waste is stronger, harder, and more resistant to high temperatures than other plastics. Using it as an additive in a concrete mixture is one solution to reduce this type of waste. We examined how HDPE-type plastics can be used as an additive material in the manufacture of concrete to improve its hardness, tensile strength and compressive strength. Using 156 samples, we aimed to identify the effect of HDPE plastic fibres on concrete of three qualities; B0, f'c10 MPa (low quality), and f'c25 MPa (medium and high quality). We added four compositions (2.5%, 5%, 10% and 20% by weight of cement) of HDPE plastic fibre to each quality of cement, with HDPE plastic fibre sizes of 1 x 1 cm, 0.5 x 2 cm or 0.25 x 4 cm. We found that the addition of 5% HDPE plastic fibre with a 0.5 x 2 cm cross-sectional shape to the f'c10 MPa concrete gives the best result, with increased tensile and compressive strength of the concrete.

Global severity maps of ongoing dengue epidemic and COVID-19 pandemic do not overlap. Countries with high dengue endemicity (>1.5 million cases/year) are observably less hit by COVID-19 in terms of infection, transmission and mortality. Based on non-overlap of dengue and COVID-19 severity maps and evidence of SARS-CoV-2 serological cross-reactions with dengue, we wonder whether immediate immunization of susceptible populations in Europe, North America and Asia (China, Iran) with available live-attenuated dengue vaccines, will cue the anti-viral immune response to thwart COVID-19 (viral interference). Risk of developing post-vaccination “Antibody-dependent Enhancement” is low as dengue is not endemic in the aforesaid regions.

Façade elements are a building component that satisfies multiple performance parameters. Among other things, “advanced façades” take advantage of hybrid solutions, such as assembling laminated materials. In addition to the enhanced mechanical properties that are typical of optimally composed hybrid structural components, these systems are energy-efficient, durable, and offer lighting comfort and optimal thermal performance, an example of which is the structural solution developed in collaboration with the University of Zagreb and the University of Ljubljana within the Croatian Science Foundation VETROLIGNUM project. The design concept involves the mechanical interaction of timber and glass load-bearing members without sealing or bonding the glass-to-timber surfaces. Following earlier research efforts devoted to the structural analysis and optimization of thus-assembled hybrid Cross-Laminated Timber (CLT)-glass façade elements, in this paper, special focus is given to a thermal and energy performance investigation under ordinary operational conditions. A simplified numerical model representative of a full-size building is first presented by taking advantage of continuous ambient records from a Live-Lab mock-up facility in Zagreb. Afterwards, a more detailed Finite Element (FE) numerical analysis is carried out at the component level to further explore the potential of CLT–glass façade elements. The collected numerical results show that CLT–glass composite panels can offer stable and promising thermal performance for façades similar to national and European standard requirements.

Facade elements are known to represent a building component with multiple performance parameters to satisfy. Among others, “advanced facades” take advantage of hybrid solutions, like the assemblage of laminated materials. In addition to enhanced mechanical properties that are typical of optimally composed hybrid structural components, these systems are energy-efficient, durable, and offer lightening comfort and optimal thermal performance. This is the case of the structural solution developed in joint research efforts of the University of Zagreb and the University of Ljubljana, within the Croatian Science Foundation VETROLIGNUM project. The design concept involves the mechanical interaction of timber and glass load-bearing members, without sealing or bonded glass-to-timber surfaces. Laminated glass infilled timber frames are recognized as a new generation of structural members with relevant load-carrying capacity (and especially the enhancement of earthquake resistance of framed systems), but also energy-efficient and cost-effective solutions.

This is a theoretical and empirical article. In the first part, an original definition of the cross-border market for cultural services has been developed, based on classic market definitions. The structure and conditions of functioning for this market have also been presented. The next part of the article discusses the supply side of the cross-border market of cultural services for the two twin towns: Cieszyn (Poland) and Český Těšín (Czech Republic). Next, based on the surveys conducted, the participation of residents of both towns in the most important cultural events organised by cultural institutions on both sides of the border was examined.

Limited observational studies have described the relationship between sleep duration and overall diet. The present study investigated the association between sleep duration at weekdays and empirically derived dietary patterns in a nationally representative sample of UK adults, aged 19-64 years old, participating in the 2008-2012 UK National Diet and Nutrition Survey Rolling Programme. Survey members completed between three to four days of dietary records. Sleep duration at weekdays was categorised into tertiles to reflect short, normal and long sleep duration. Social jetlag was calculated as the difference between sleep duration at weekends and weekdays. The association between sleep duration/ social jetlag and dietary patterns, derived by principal components analysis, was assessed regressing diet on sleep whilst accounting for the complex survey design and adjusting for relevant confounders. Survey members in the highest tertile of sleep duration had on average 0.45 (95% CI -0.78, -0.12) lower healthy dietary pattern score compared to middle tertile (p =0.007). There was an inverted u-shaped association between social jetlag and a healthy dietary pattern, such that when sleep at weekends exceeded weekday sleep by 1h 45min, scores for indicating a healthy dietary pattern declined (p =0.005). In conclusion, long sleep duration at weekdays and an increased social jetlag are associated with a lower healthy dietary pattern score. Further research is required to address factors influencing dietary patterns in long sleepers.

This work explores the use of Kuhn verdazyl radicals as building blocks in multifunctional molecular materials in an exemplary study, focusing on the magnetic and the electron transfer (ET) characteristics, but also addressing the question whether chemical modification by cross-coupling is possible. The ET in solution is studied spectroscopically whereas solid state measurements afford information about the magnetic susceptibility or the conductivity of the given samples. The observed results are rationalized based on the chemical structures of the molecules, which have been obtained by X-ray crystallography. The crystallographically observed molecular structures as well as the interpretation based on the spectroscopic and physical measurements are backed up by DFT calculations. The measurements indicate that only weak, antiferromagnetic coupling is observed in Kuhn verdazyls owed to the low tendency to form face-to-face stacks, but also that steric reasons alone are not sufficient to explain this behavior. Furthermore, it is also demonstrated that ET reactions proceed rapidly in verdazyls/verdazylium redox couples and that Kuhn verdazyls are suited as donor molecules in ET reactions.

Single valued neutrosophic set has king power to express uncertainty characterized by indeterminacy, inconsistency and incompleteness. Most of the existing single valued neutrosophic cross entropy bears an asymmetrical behavior and produce an undefined phenomenon in some situations. In order to deal with these disadvantages, we propose a new cross entropy measure under single valued neutrosophic set (SVNS) environment namely SN- cross entropy and prove its basic properties. Also we define weighted SN-cross entropy measure and investigate its basic properties. We develop a new multi attribute group decision making (MAGDM) strategy for ranking of the alternatives based on the proposed weighted SN-cross entropy measure between each alternative and the ideal alternative. Finally, a numerical example of MAGDM problem of investment potential is solved to show the validity and efficiency of proposed decision making strategy. We also present comparative anslysis of the obtained result with the results obtained form the existing solution strategies in the solution.

This paper proposes a non-extensive entropy econometric technique to predict energy efficiency at province (NUT-2) level based on imperfect knowledge of the national overall efficiency in the sectors of industry, transport, households and services. The model is applied to the polish case. As acknowledged in recent literature, non-extensive entropy model should remain a valuable device for econometric modelling even in the case of low frequency series since outputs provided by the Gibbs-Shannon entropy approach correspond to the Tsallis entropy limiting case of the Gaussian law when the Tsallis q-parameter converges to unity. Therefore, we set up a q-Tsallis-Kullback-Leibler entropy criterion function with a priori consistency moment and model data constraints, including province energy intensity (known with uncertainty), regional climate differentiation and regular conditions. The model outputs continue to conform to empirical expectations. In spite of the close to unity q-Tsallis parameter, this Tsallis related approach reflects higher stability for parameter computation in comparison with the Shannon-Gibbs entropy econometrics technique. The proposed technique can be applied in different EU countries and elsewhere for example in the context of experimental official statistics.

Efficient thermal management of modern electronics requires the use of thin films with highly anisotropic thermal conductivity. Such films enable the effective dissipation of excess heat along one direction while simultaneously providing thermal insulation along the perpendicular direction. In this study, we investigate the thermal conductivity of bilayer graphene (BLG) sheets using non-equilibrium molecular dynamics, examining both in-plane and cross-plane thermal conductivities. The in-plane thermal conductivity of 10 nm × 10 nm BLG with zigzag and armchair edges at room temperature is found to be around 204 W/m.K and 124 W/m.K, respectively. The in-plane thermal conductivity of BLG increases with sheet length. For all sizes, BLG with a zigzag edge exhibits higher thermal conductivity than that of the armchair edge, with this difference becoming more pronounced as the lengths of the sheets increase. In addition, increasing temperature from 300 K to 600 K decreases the in-plane thermal conductivity of a 10 nm× 10 nm zigzag BLG by about 34%. Similarly, the application of a 12.5% tensile strain induces a 51% reduction in its thermal conductivity compared to the strain-free values. Armchair configurations exhibit similar responses to variations in temperature and strain, but with less sensitivity. Furthermore, the cross-plane thermal conductivity of BLG at 300 K is estimated to be 0.05 W/m·K, significantly lower than the in-plane results by approximately four orders of magnitude. The cross-plane thermal conductance of BLG decreases with increasing temperatures, specifically, at 600 K, its value is almost 16% of that observed at 300 K.

The rationalization and modeling of an electric discharge in a fluid require the knowledge of electron swarm parameters. In this work, transport coefficients of alcohols, including methanol, ethanol, propanol, and butanol are reported. The electron energy distribution function, mean energy, reduced mobility, and diffusion coefficient, are calculated using the two-term expansion of the electron Boltzmann equation in the frame of BOLSIG+ and the Monte Carlo collision code METHES. For such, experimental and theoretical values of the electron-alcohol collision cross-section, covering a range of electron impact energy from 1 eV to 1000 eV, are employed. A temperature of 300K, reduced fields E/N between $1-10^4$ Td (1Td = $10^{-21}~\rm Vm^2$), and Plasma density of $10^{19}~\rm m^{-3}$ were used in simulations. The calculated coefficients are compared with data available from previous studies.

The genetic diversity of coronavirus (CoV) is high, and its infection in animals has not yet been fully revealed. By RT-PCR detection of partial RNA dependent RNA polymerase (RdRp) gene of CoV, we screened a total of 502 small mammals belonging to 18 species in 12 genera and 4 orders collected in Dali and Nujiang Prefecture of Western Yunnan Province, China. The prevalence of β-CoV in Chevrieri's field mouse (Apodemus chevrieri) and Lancangjiang field mouse (A. ilex) were 3.54% (4/113) and 6.67% (6/90), respectively; the prevalence of α-CoV in White-footed Indochinese rat (Rattus nitidus) and long-tailed red-toothed shrew (Episoriculus leucops) was 75% (3/4) and 5.88% (1/17), respectively. The co-infection rates of β-CoV and α-CoV in Kachin red-backed vole (Eothenomys cachinus), Norway rat (R. norvegicus) were 2.22% (2/90), 3.85% (1/26) respectively. The identity of the partial RdRp genes obtained of 13 strains of β-CoV was 83.42%-99.23% at nucleotide level, and it is worth noting that the two strains from Kachin red-backed vole showed highly homology to BOV-36/IND/2015 from Indian bovine and DcCoV-HKU23 from one-humped camel (Camelus dromedarius) in Morocco, the nucleotide similarity between 97.86%-98.33%. Similarly, the identity of the 7 strains of α-CoV among the partial RdRp sequences was 94.00%-99.18% at nucleotide levels. The viral load in different tissues was measured by quantitative RT-PCR (qRT-PCR). The average CoV viral load in small mammalian intestinal tissue was 1.25×106copies/g, differently, the mean CoV viral load in liver, heart, lung, spleen and kidney tissue was from 1.29×103 to 4.02×103copies/g, which revealed that CoV has extensive tropism of intestinal tissue in small mammals (P &lt; 0.0001). This result revealed the genetic diversity, epidemiology, and infective tropism of α-CoV and β-CoV in small mammals from Dali and Nujiang, which deepens the comprehending of the retention and infection of coronavirus in natural hosts.

The aim of this systematic scoping review was to provide scientific evidence on the efficacy and methods of application of hyaluronic acid in the coverage of gingival recessions in terms of recession depth (RD) reduction, clinical attachment level (CAL) gain, probing depth (PD). An electronic search of the literature on the main databases was conducted. Initially, 405 articles were identified. Finally, 4 studies were included after the review process. It was not possible to perform a meta-analysis of the articles selected because of the differences among the surgical treatments and commercial formulations and compositions of hyaluronic acid. Both randomized controlled trials in this research examined Recession Type 1 gingival treated with coronally advanced flap. Recessions were treated with either modified coronally advanced tunnel or laterally closed tunnel combined with subepithelial connective tissue graft and hyaluronic acid (HA) in all case series. The studies analyzed no significant variation was found in PD variable. The results of RD reduction are in accordance with the literature. Modifications of CAL are connected to variations of RD. HA seems to improve the clinical outcomes of the described surgical treatment.

Disasters related to climate change on our water resources are on the rise in terms of scale and severity. Therefore, predicting groundwater levels (GWL) is a crucial means to aid adaptive capacity towards disasters related to climate change in our water resources. In this study Gradient Boosting (GB) regression modelling approach for GWL prediction as a function of rainfall and antecedent GWL is used. Firstly, we sought to demonstrate the effects of rainfall changes on our groundwater resources through a Mann-Kendall trend analysis. Secondly, we evaluated the relationship between the input and response variables and determined the optimal lag times between the variables using autocorrelations and cross-correlations. Lastly a predictive model was developed for eight groundwater stations in the Upper Crocodile. 50 % of the groundwater stations revealed declining trends, while 25% had no trends and the other 25% showed an increasing trend. Generally low cross-correlation maximum (CCmax) were obtained, with the highest CCmax being 0.299 at an optimal lag of 2-month. While the highest autocorrelation was 0.969 at a 1-month lag. The best groundwater predictive model had R2 and MSE of 0.66 and 0.06, respectively. The stations that generally performed better had both high autocorrelation and cross-correlation coefficients. GB model performed satisfactorily in predicting GWL for most of the stations in the study area. Therefore, GB can be used for GWL prediction in the Upper Crocodile.

Wheat (Triticum aestivum L.) breeding programs can take over a decade to release a new variety. However, new methods of selection such as genomic selection (GS) must be integrated to decrease the time it takes to release new varieties to meet the demand of a growing population. The implementation of GS into breeding programs is still being explored, with many studies showing its potential to change wheat breeding through achieving higher genetic gain. In this review, we explore the integration of GS for a wheat breeding program by redesigning the traditional breeding pipeline to implement GS. We propose implementing a two-part breeding strategy by differentiating between population improvement and product development. The implementation of GS in the product development pipeline can be integrated into most stages and can predict within and across breeding cycles. Additionally, we explore optimizing the population improvement strategy through GS recurrent selection schemes to reduce crossing cycle time and significantly increase genetic gain. The recurrent selection schemes can be optimized for parental selection, maintenance of genetic variation, and optimal cross-prediction. Overall, we outline the ability to increase the genetic gain of a breeding program by implementing GS and a two-part breeding strategy.

The combination of chemical cross-linking and mass spectrometry is currently a progressive technology for deriving structural information of proteins and protein complexes. In addition, chemical cross-linking is a powerful tool for stabilizing macromolecular complexes for single particle cryo-electron microscopy. Broad pallets of cross-linking chemistry, currently available for the majority of cross-linking experiments, still rely on the amine-reactive N-hydroxysuccinimide esters targeting mainly N-termini and lysine side chains. These cross-linkers are divided into two groups: water soluble and water insoluble; and research teams prefer one or another speculating on the benefits of their choice. However, the effect of cross-linker polarity on the outcome of cross-linking reaction has never been studied. Herein, we use both polar (bis(sulfosuccinimidyl) glutarate) and non-polar (disuccinimidyl glutarate) cross-linkers and systematically investigated the impact of cross-linker hydrophobicity on resulting distance constraints, using bovine serum albumin as a model protein.

Bipolar neutrosophic set is an important extension of bipolar fuzzy set. This set is a hybridization of bipolar fuzzy set and neutrosophic set. Every element of a bipolar neutrosophic set consists of three independent positive membership functions and three independent negative membership functions. In this paper, we develop cross entropy measures of bipolar neutrosophic sets and prove its properties. We also define cross entropy measures of interval bipolar neutrosophic sets and prove its properties. Thereafter, we develop two novel multi-attribute decision making methods based on the proposed cross entropy measures. In the decision making framework, we calculate the weighted cross entropy measures between each alternative and the ideal alternative to rank the alternatives and choose the best one. We solve two illustrative examples of multi-attribute decision making problems and compare the obtained result with the results of other existing methods to show the applicability and effectiveness of the developed method. In the end, the main conclusion and future scope of research are summarized.

Current microbiological methods for pneumonia diagnosis require invasive specimen collection and time-consuming analytical procedures. There is a need for less invasive and faster methods to detect lower respiratory tract infection. The analysis of volatile metabolites excreted by pathogenic microorganisms provides the basis for developing such a method. Given the synergistic role of Candida albicans in increasing the virulence of pathogenic bacteria causing pneumonia and the cross-kingdom metabolic interactions between microorganisms, we compare the emission of volatiles from Candida albicans yeasts and the bacteria Staphylococcus aureus using single and mixed co-cultures and apply that knowledge to human in vivo investigations. Gas-chromatography-mass spectrometry (GC-MS) analysis resulted in the identification of sixty-eight volatiles that were found to have significantly different levels in cultures compared to reference medium samples. Certain volatiles found in co-culture originated mainly from C. albicans metabolism (e.g., isobutyl acetate), whereas other volatiles primarily came from S. aureus (e.g., ethyl 2-methylbutyrate). Isopentyl valerate reflects synergic interactions of both microbes, as its level in co-cultures was found to be approximately three times higher than the sum of its amounts in monocultures. Hydrophilic-lipophilic balanced (HLB) coated meshes for thin-film microextraction (TFME) were used to pre-concentrate volatiles directly from bronchoalveolar lavage (BAL) specimens collected from patients suffering from ventilation-associated pneumonia (VAP) that was caused explicitly by C. albicans and S. aureus. GC-MS analyses confirmed the existence of in vitro-elucidated microbial VOCs in human specimens. Significant differences in BAL-extracted amounts respective to the pathogen causing pneumonia were found. The model in vitro experiments provided evidence that cross-kingdom interactions between pathogenic microorganisms affect the synthesis of the volatile compounds. The TFME meshes coated with HLB particles proved to be suitable for extracting VOCs from human material, enabling the translation of in vitro experiments on the microbial volatilome to the in vivo situation involving infected patients. This indicates the direction that should be taken for further clinical studies on VAP diagnosis based on volatile analysis.

We aimed to evaluate the association between daily dietary calcium intake and the risk of cardiovascular disease (CVD) in postmenopausal women using data from the Korean National Health and Nutrition Examination Survey (KNHANES). This cross-sectional study included 12,348 women aged 45–70 years who had reached natural menopause. They were classified into three groups according to daily dietary calcium intake: &lt; 400 mg, 400–800 mg, and &gt;800 mg. The risks of CVD, stroke, angina, and myocardial infarction were assessed in each group. Further, we performed subgroup analysis according to the post-menopause duration (≤10 vs. &gt;10 postmenopausal years). We performed logistic regression analysis with adjustment for age, menopausal age, income, urban area, education, insulin use, body mass index, hypertension, diabetes mellitus, dyslipidemia, high alcohol intake, smoking, exercise, oral contraceptive use, and hormonal therapy use. Calcium intake level was not significantly associated with the risk of CVD in the total population and the ≤10 postmenopausal years subgroup. However, in the &gt;10 postmenopausal years subgroup, daily calcium intake &gt;800 mg was associated with significantly decreased risks of all CVD (odds ratio [OR], 0.27; 95% confidence interval [CI], 0.11–0.64), stroke (OR, 0.06; 95% CI, 0.01–0.42), and myocardial infarction (OR, 0.27; 95% CI, 0.11–0.64). Our findings suggest that a dietary calcium intake of &gt;800 mg/day decreases the risk of CVD events in women who have been menopausal for &gt;10 years.

The origin of neurodegenerative diseases is linked to the abnormal folding of disease-associated proteins. The traditional amyloid hypothesis has been a focal point of research, but recent findings suggest a more complex picture. This review explores the role of physiological conformation of aggregation-prone domain (also known as prion-like low complexity domain) and multiple co-misfolded proteins in neurodegenerative diseases. We highlight the importance of targeting multi-heterotypic misfolded proteins for effective treatments and emphasize the irreversible neurodegeneration stemming from the loss of physiological folding in prion-like disease-causing proteins underscores the criticality of refolding. Additionally, we introduce the concept of ReproFold Therapeutics, a novel approach aimed at restoring the cellular prion-like folding of disease-causing proteins to rebuild normal cross-β interactomes and mitigate neurodegeneration. Baicalein, a potential drug candidate for this approach, shows promise in vitro and in animal models. Moreover, prion-like low complexity domains implicated in neurodegeneration are also associated with other disorders such as diabetes, cancers, and mental illnesses. Understanding the core pathology of neurodegenerative diseases and the broader implications of prion-like LC domains could revolutionize healthcare approaches and policies worldwide.

The worldwide competition to vaccinate against COVID-19 has highlighted the importance of immunization measures in containing the virus. Saudi Arabia, like the rest of the globe, must assess socio-demographic subtleties, chronic illnesses, vaccination effects, and public health policy implications as it navigates this complicated environment. This cross-sectional study examined Saudi COVID-19 vaccine in many ways. It examined the socio-demographic makeup of vaccine recipients, the prevalence of chronic conditions in this population, vaccine administration patterns, post-vaccination side effects, and vaccine-infection rates. A questionnaire-based online survey of 401 participants ensured gender, nationality, age, weight, and educational diversity. We analyzed vaccine manufacturer choice for each dosage, side effects after the first and second doses, and chronic diseases in the sample. Pfizer/BioNTech vaccines are preferred for all three doses, reflecting worldwide vaccination acceptance patterns. Side effects were not significantly different between vaccination kinds. Interestingly, immunization reduced infection rates, demonstrating the efficacy of COVID-19 vaccines. The data fills important information gaps and illuminates Saudi COVID-19 vaccination kinetics. These data support the global preference for mRNA vaccines, demonstrating the faith in this breakthrough technology. They also sponsor COVID-19 vaccine safety and effectiveness studies. The dramatic drop in infection rates among vaccinated people shows how vaccinations suppress the pandemic. These findings inform Saudi Arabia's immunization efforts. As booster doses become more common, long-term vaccination research is crucial. Vaccine reluctance, especially in certain demographics, must be addressed. Due to vaccines' protective potential, equitable vaccine distribution and large immunization programs are essential for herd immunity and pandemic management. This thorough cross-sectional study helps policymakers and healthcare practitioners build successful and inclusive COVID-19 immunization regimens in Saudi Arabia.

Experimental tests and numerical analyses were carried out on short, thin-walled channel columns with modified cross-sectional shape. The columns were loaded with an axial compressive force applied at the center of gravity of the cross section. Tests were carried out on a universal testing machine, while numerical analyses were performed in ANSYS software. The purpose of the tests was to determine the values of critical forces for the compressed columns and to determine the values of maximum forces at which failure of the columns occurs. Critical forces were determined based on the strain-averaged method. Based on the study, it was found that the strength and resistance to loss of stability of columns is primarily affected by their stiffness, and therefore by the shape of the cross-sections. In addition, for short columns, it seems more important to determine the value of maximum forces than the values of critical forces.

The modification of GFP-CaaL sensor proteins by geranylgeranyl groups in plants requires an active plastidial mevalonate (MVA)-independent pathway. As a consequence, fosmidomycin, a specific inhibitor of 1-deoxy-D-xylulose (DX)-5 phosphate reductoisomerase/DXR, the second enzyme in this so-called methylerythritol phosphate (MEP) pathway, impedes protein prenylation, which results in GFP-labeling of nuclei instead of the plasma membrane. In tobacco cells, a visual screen of conditions that allowed membrane localization of GFP-CaaL proteins in the presence of fosmidomycin, pinpointed jasmonic acid methyl esther (Me-JA) as a chemical able to overcome the inhibition in a gradual manner. Using Arabidopsis protein prenyltransferase loss-of-function mutant lines expressing GFP-CaaL proteins, we demonstrated that Me-JA induces a modification in protein substrate recognition by protein farnesyltransferase (PFT). Similar to Me-JA, farnesol and MVA also alter the protein substrate specificity of PFT, whereas DX and geranylgeraniol have limited or no effect. Our data indicate that stimulation of the MVA pathway adjusts the protein substrate specificity of PFT, which is corroborated with metabolic cross-talk of the origin of the prenyl group used to modify the protein. To illustrate how activation of the MVA pathway impacting PFT substrate specificity benefits a plant under stress conditions, a model is proposed.

Background: The newly introduced COVID-19 vaccines have reduced disease severity and hospitalizations. However, they do not significantly prevent infection or transmission. In the same context, measuring IgM and IgG antibody levels is important, but it doesn't provide information about the status of the mucosal immune response. This article describes a comprehensive mapping of IgA epitopes of the S protein, its cross-reactivity, and the development of an ELISA-peptide assay. Methods: IgA epitope mapping was conducted using Spot-synthesis and sera from RT-qPCR COVID-19-positive patients. Specific and cross-reacting epitopes were identified, and an evolutionary analysis from the early Wuhan strain to the Omicron variant was performed using bioinformatics tools and a microarray of peptides. The selected epitopes were chemically synthesized and evaluated using ELISA-IgA. Results: 40 IgA epitopes were identified, with 23 in S1 and 17 in the S2 subunit. Among these, at least 23 epitopes showed cross-reactivity with DENV and other organisms and 24 with other associated coronaviruses. Three MAP4 polypeptides were validated by ELISA, demonstrating a sensitivity of 90-99.96% and a specificity of 100%. Among the six IgA-RBD epitopes, only the SC/18 epitope of the Omicron variants (BA.2 and BA.2.12.1) presented a single IgA epitope. Conclusions: This research unveiled the IgA epitome of the S protein and identified many epitopes that exhibit cross-reactivity with DENV and other coronaviruses. The S protein of variants from Wuhan to Omicron retains many conserved IgA epitopes, except for one epitope (#SCov/18). The cross-reactivity with DENV suggests limitations in using the whole S protein or the S1/S2/RBD segment for IgA serological diagnostic tests for COVID-19. The expression of these identified specific epitopes as diagnostic biomarkers could facilitate monitoring mucosal immunity to COVID-19, potentially leading to more accurate diagnoses and alternative mucosal vaccines.

Patterning, stability, and dispersion of the semiconductor quantum dots (scQDs) are the three issues strictly interconnected for successful device manufacturing. Recently several authors adopted direct optical patterning (DOP) as a step forward in photolithography to position the scQDs in a selected area. However, the chemistry behind the stability, dispersion, and patterning has to be carefully integrated to obtain a functional and therefore, commercial device. In this review are described different chemical strategies suitable to stabilize the scQDs both at a single level and as an ensemble with a special focus on the ones compatible with direct optical patterning (DOP). With the same purpose, the scQDs dispersion in a matrix was described in terms of the scQDs surface ligands interactions with the matrix itself. The chemical processes behind the DOP are illustrated and discussed for five different approaches that consider together stability, dispersion, and the patterning itself of the scQDs.

Background: Both natural immunity and vaccine-induced immunity to COVID-19 may be useful to reduce the mortality/morbidity of this disease, but still a lot of controversy exists. Aims: This narrative review analyzes the literature about: a) the duration of natural immunity; b) cellular immunity; c) cross-reactivity; d) the duration of post-vaccination immune protection; e) the probability of reinfection and its clinical manifestations in the recovered patients; f) comparisons between vaccinated and unvaccinated in the possible reinfections; g) the role of hybrid immunity; h) the effectiveness of natural and vaccine-induced immunity against Omicron variant; i) comparative incidence of adverse effects after vaccination in recovered individuals vs. COVID-19-naïve subjects. Material and Methods: through multiple search engines we investigated COVID-19 literature related to the aims of the review, published since April 2020 through July 2022, including also the previous articles pertinent to the investigated topics. Results: nearly 900 studies were collected and 238 pertinent articles were included. It was highlighted that the vast majority of individuals after COVID-19 develop a natural immunity both of cell-mediated and humoral type, which is effective over time and provides protection against both reinfection and serious illness. Vaccine-induced immunity was shown to decay faster than natural immunity. In general, the severity of the symptoms of reinfection is significantly lower than in the primary infection, with a lower degree of hospitalizations (0.06%) and an extremely low mortality. Conclusions: this narrative review regarding a vast number of articles highlighted the valuable protection induced by the natural immunity after COVID-19, which seems comparable or superior to the one induced by anti-SARS-CoV-2 vaccination. Vaccination of the unvaccinated COVID-19-recovered subjects may not be indicated. Further research is needed in order to: a) measure the durability of immunity over time; b) evaluate both the impacts of Omicron-5 on vaccinated and healed subjects and of hybrid immunity.

This article provides a systematic review of the crosslinking strategies used to produce microgel particles in microfluidic chips. Various ionic crosslinking methods for gelation of charged pol-ymers are discussed, including external gelation via crosslinkers dissolved or dispersed in the oil phase, internal gelation methods using crosslinkers added to the dispersed phase in their non-active forms, such as chelating agents, photo-acid generators, sparingly soluble or slowly hydrolyzing compounds, and methods involving competitive ligand exchange, rapid mixing of polymer and crosslinking streams, and merging polymer and crosslinker droplets. Covalent crosslinking methods using enzymatic oxidation of modified biopolymers, photo-polymerization of crosslinkable monomers or polymers, and thiol-ene “click” reactions are also discussed, as well as the methods based on sol-gel transitions of stimuli responsive polymers triggered by pH or temperature change. In addition to homogeneous microgel particles, the production of structurally heterogeneous particles such as composite hydrogel particles entrapping droplet interface bi-layers, core-shell particles, organoids, and Janus particles are also discussed. Microfluidics offers the ability to precisely tune chemical composition, size, shape, surface morphology, and internal structure of microgels by bringing in contact multiple fluid streams in a highly controlled fashion using versatile channel geometries and flow configurations and allowing controlled crosslinking.

In this paper, we provide some enlightening examples of the application of Clifford algebra in geometry, which show the concise representation, simple calculation and profound insight of this algebra. The definition of Clifford algebra implies geometric concepts such as vector, length, angle, area and volume, and unifies the calculus of scalar, spinor, vector and tensor, so that it is able to naturally describe all variables and calculus in geometry and physics. Clifford algebra unifies and generalizes real number, complex, quaternion and vector algebra, converts complicated relations and operations into intuitive matrix algebra independent of coordinate systems. By localizing the basis or frame of space-time and introducing differential and connection operators, Clifford algebra also contains Riemann geometry. Clifford algebra provides a unified, standard, elegant and open language and tools for numerous complicated mathematical and physical theories. Clifford algebra calculus is an arithmetic-like operation that can be well understood by everyone. This feature is very useful for teaching purposes, and popularizing Clifford algebra in high schools and universities will greatly improve the efficiency of students to learn fundamental knowledge of mathematics and physics. So Clifford algebra can be expected to complete a new big synthesis of scientific knowledge.

Neutrosophic cubic set (NCS) is one of the important family members of neutrosophic hybrid sets. Neutrosophic cubic set has more strength than other family members of neutrosophic hybrid sets to express incomplete information due to the presence of interval valued neutrosophic set (IVNS) and single valued neutrosophic set (SVNS) in its structure. Cross entropy measure is one of the best way to calculate the divergence of any variable from the priori one variable. In this paper we first define a new cross entropy measure under NCSs environment which we call NC- cross entropy measure. We investigate the basic properties of NC-cross entropy. We also propose weighted NC-cross entropy and investigate its basic properties. We develop a novel multi attribute decision making (MADM) strategy based on weighted NC-cross entropy. To show the feasibility and applicability, we solve a MADM problem using the proposed strategy.

In this research, univariate and bivariate statistical methods were applied to rainfall, river and piezometric level datasets belonging to 24 years long time series (1986-2009). These methods, that often are used to understand the effects of precipitation on rivers and karstic springs discharge, have been used to assess, piezometric level response to rainfall and river level fluctuations in a porous aquifer. A rain gauge, a river level gauge and three wells, located in Central Italy along the lower Pescara river valley in correspondence of its important alluvial aquifer, provided the data. The statistical analysis has been used within a known hydrogeological framework, which has been refined by mean of a photo-interpretation and a GPS survey. Water-groundwater relationships were identified following the autocorrelation and cross-correlation analyses; the spectral analysis and mono-fractal features of time series were assessed, in order to provide information on multy-year variability, data distributions, their fractal dimension and the distribution return time within the historical time series. The statistical-mathematical results were interpreted through field work that identified distinct groundwater flowpaths within the aquifer and enabled the implementation of a conceptual model, improving the knowledge on water resources management tools.

Wall Shear Stress (WSS) abnormalities in carotid artery blood flow are key hemodynamic factors leading to arterial endothelial damage, atherosclerotic plaque formation, and carotid artery stenosis. Precise simulation of carotid artery blood flow WSS in vitro play an important role in understanding the underlying hemodynamic mechanism of carotid artery stenosis. This study presents a design for a microfluidic cell culture chamber with a variable cross-section and a step structure, leveraging microfluidic technology and principles of fluid dynamics. We propose an optimization strategy for microchannel dimensions based on Computational Fluid Dynamics (CFD) simulations. This strategy aims to replicate the distinct WSS waveform features found at various locations within the carotid bifurcation as observed in vivo. Our simulations indicate that with a step height of 0.09 mm, a width of 4 mm for the initial segment, and 5 mm for the subsequent wider channel, the device can effectively model the characteristics of low oscillatory WSS seen at sites of carotid sinus stenosis. Furthermore, it accurately represents the high-magnitude pulsatile WSS waveforms in the more uniform arterial sections downstream of the carotid sinus. The study also reveals that vortex formation and variations in low oscillatory WSS within the stepped section of the microchannel correlate with the step's height and width, as well as with the dimensions of the wider channel section. An increase in step width leads to a decrease in both the vortex area and the magnitude of negative WSS oscillations. When the step height is less than 0.03 mm, vortex formation is inhibited, challenging the simulation of low oscillatory WSS patterns. The variable cross-section microfluidic channel developed in this study provides a platform for simulating carotid artery WSS waveforms and facilitates research into the interplay between low oscillatory WSS at sites of carotid sinus stenosis and arterial endothelial dysfunction.

Hand gestures are an essential part of human-to-human communication and interaction, and therefore for technical applications, the aim is increasingly to achieve interaction between humans and computers that is as natural as possible, for example by means of natural language or hand gestures. In the context of human-machine interaction research, these methods are consequently being explored more and more. However, the realization of natural communication between humans and computers is a major challenge. In the field of hand gesture recognition, research approaches are being pursued that use additional hardware such as special gloves to classify gestures with high accuracy. Recently, deep learning techniques using artificial neural networks have been increasingly proposed for the problem of gesture recognition without using such tools. In this context, in our approach convolutional neural network (CNN) will be explored in detail for the task of hand gesture recognition. CNN is a deep neural network that can be used in the field of visual object processing and classification. The goal of this work is to recognize ten types of static hand gestures in front of complex backgrounds and different hand sizes based on raw images without the use of extra hardware. We achieved good results with a CNN network architecture consisting of seven layers. Through data augmentation and skin segmentation, a significant increase of the model accuracy was achieved. On public benchmarks the ten gestures have been classified almost perfectly with a testing accuracy of 96.5%

The paper is dedicated to the topical problem of examining permafrost state and the processes of its geocryological changes by means of geophysical methods. To monitor the cryolithozone, we propose and scientifically substantiate a new technique of pulsed electromagnetic cross-well sounding. Based on the vector finite-element method, we created a mathematical model of the cross-well sounding process with a pulsed source in a three-dimensional spatially heterogeneous medium. A high-performance parallel computing algorithm was developed and verified. Through realistic geoelectric models of permafrost with a talik under a highway, constructed following the results of electrotomography field data interpretation, we numerically simulated the pulsed sounding on the computing resources of the Siberian Supercomputer Center of SB RAS. The simulation results suggest the proposed system of pulsed electromagnetic cross-well monitoring to be characterized by a high sensitivity to the presence and dimensions of the talik. The devised approach can be oriented to addressing a wide range of issues related to monitoring permafrost rocks under civil and industrial facilities, buildings and constructions.

Sex dimorphism starts during early embryogenesis and is further manifested in response to hormones during puberty. As this leads to physical divergence that is measurably different between sexes, males enjoy physical performance advantages over females within competitive sport. While this advantage is the underlying basis of the segregation into male and female sporting categories, these sex-based categories do not account for transgender persons who experience incongruence between their biological sex and their experienced gender identity. Accordingly, the International Olympic Committee determined criteria by which a transgender woman may be eligible to compete in the female category, requiring total serum testosterone levels to be suppressed below 10 nmol/L for at least 12 months prior to and during competition. Whether this regulation removes the male performance advantage has not been collectively scrutinized. Here, we aim to review how differences in biological characteristics between biological males and females affect sporting performance and assess whether evidence exists to support the assumption that testosterone suppression in transgender women removes the male performance advantage. In this review, we report that the performance gap between males and females amounts to 10-50% depending on sport. The performance gap is more pronounced in sporting activities relying on muscle mass and strength, particularly in the upper body. Longitudinal studies examining the effects of testosterone suppression on muscle mass and strength in transgender women consistently show very modest changes, where the loss of lean body mass, muscle area and strength typically amounts to approximately 5% after 1 year of treatment. Thus, current evidence shows that the biological advantage enjoyed by transgender women is only minimally reduced when testosterone is suppressed. Sports organizations may therefore be compelled to reassess current policies regarding participation of transgender women in the female category of sport.

Background: Pre-treatment with lipopolysaccharide (LPS) protected the kidney against a later lethal ischemia. To reveal the mechanisms of renal cross-tolerance and septic acute kidney injury we investigated the effects of LPS on miRNA expression in the kidney. Methods: Male NMRI mice were injected with 40 and 10 mg/kg LPS ip. and sacrificed at 1.5 and 6 hours (early preconditioning, EP) and at 24 and 48 hours (late preconditioning, LP). The miRNA profile was established using miRCURY LNA™ microarray and confirmed with qPCR. Results: Plasma urea concentration peaked at 24 hours after LPS and decreased thereafter. Renal TNF-α and IL-6 mRNA were extremely elevated at all time-points. miRNome changes were mild at 1.5 hours, most miRNAs were altered at 6 and 24 hours and declined by 48 hours. Not all miRNAs could be assayed or validated by qPCR. In EP miR-762 was newly identified and validated and was the most elevated miRNA with both methods. In LP miR-21a-5p was the most influenced miRNA followed by miR-451a, miR-144-3p and miR-146a-5p. MiR-21a-3p increased significantly in both EP and LP. Conclusion: miR-762 might attenuate the LPS-induced immune response during EP and the miR-144/451 cluster is involved in LPS-induced renal preconditioning.

In order to clarify the nature of the halogen bond (XB), we considered the prototype noble gas – dihalogen molecule (Ng-X2) systems, focusing on the nature, range and strength of the interaction. We exploited data gained from molecular beam scattering experiments with the measure of interference effects to obtain a suitable formulation of the interaction potential, with the support of high-level ab initio calculations, and charge displacement analysis. The essential interaction components involved in the Ng-X2 adducts have been characterized, pointing at their critical balance in the definition of the XB. Particular emphasis is devoted to the energy stability of the orientational Ng-X2 isomers, the barrier for the X2 hindered rotation, and the influence of the X2 electronic state. The present integrated study returns reliable force fields for molecular dynamics simulations in Ng-X2 complexes that can be extended to systems with increasing complexity and whose properties depend on the selective formation of XB.

The lay-up of cross laminated timber (CLT) leads to significant differences in properties over its cross-section. Particularly the out-of-plane shear behavior of CLT is effected by the changes in shear moduli over the cross-section. Results from laboratory shear tests are used to evaluate the shear stiffness of 3- and 5-layer CLT panels in their major and minor strength direction. The results are compared to calculated shear stiffness values on evaluated single-layer properties as well as commonly used property ratios using the Timoshenko beam theory and the shear analogy method. Differences between the two calculation approaches are pointed out. The shear stiffness is highly sensitive to the ratio of the shear modulus parallel to the grain to the shear modulus perpendicular to the grain. The stiffness values determined from two test measurements are compared with the calculated results. The level of agreement is dependent on the number of layers in CLT and the property axis of the CLT panels.

The high level of dengue virus (DENV) seroprevalence in areas where Zika virus (ZIKV) is circulating and the cross-reactivity between these two viruses have raised concerns on the risk of increased ZIKV disease severity for patients with a history of previous DENV infection. To determine the role of DENV pre-immunity in ZIKV infection, we analysed the T and B cell responses against ZIKV in donors with or without previous DENV infection. Using PBMCs from donors living in an endemic area in Colombia, we have identified, by interferon (IFN)-γ enzyme-linked immunospot (ELISPOT) assay, most of the immunodominant ZIKV T-cell epitopes in the non-structural proteins NS1, NS3 and NS5. Analyses of the T and B-cell responses in the same donors revealed a stronger T-cell response against peptides conserved between DENV and ZIKV, with a higher level of ZIKV-neutralizing antibodies in DENV-immune donors, in comparison with DENV-naïve donors. Strikingly, the potential for antibody mediated enhancement of ZIKV infection was reduced in donors with sequential DENV and ZIKV infection in comparison with donors with DENV infection only. Altogether, these data suggest that individuals with DENV immunity present improved immune responses against ZIKV.

Studies employing Arellano-Bond and Blundell-Bond GMM estimation for single linear dynamic panel data models are growing exponentially in number. However, for researchers it is hard to make a reasoned choice between many different possible implementations of these estimators and associated tests. By simulation the effects are examined of many options regarding: (i) reducing, extending or modifying the set of instruments; (ii) specifying the weighting matrix in relation to the type of heteroskedasticity; (iii) using (robustified) 1-step or (corrected) 2-step variance estimators; (iv) employing 1-step or 2-step residuals in Sargan-Hansen overall or incremental overidentification restrictions tests. This is all done for models in which some regressors may be either strictly exogenous, predetermined or endogenous. Surprisingly, particular asymptotically optimal and relatively robust weighting matrices are found to be superior in finite samples to ostensibly more appropriate versions. Most of the variants of tests for overidentification restrictions show serious deficiencies. A recently developed modification of GMM is found to have great potential when the cross-sectional heteroskedasticity is pronounced and the time-series dimension of the sample not too small. Finally all techniques are employed to actual data and lead to some profound insights.

Cowpea chlorotic mottle virus (CCMV) is a plant virus explored as a nanotechnological platform. The robust self-assembly mechanism of its capsid protein allows for drug encapsulation and targeted delivery. Additionally, the capsid nanoparticle can be used as a programmable platform to display different molecular moieties. In view of future applications, efficient production and purification of plant viruses is a key step. In established protocols, the need for ultracentrifugation is a significant limitation due to cost, difficult scalability, and safety issues. In addition, the purity of the final virus isolate often remains unclear. Here, an advanced protocol for the purification of CCMV from infected plant tissue was developed, focusing on efficiency, economy, and final purity. The protocol involves precipitation with PEG 8000, followed by an affinity extraction using a novel peptide aptamer. The efficiency of the protocol was validated using size exclusion chromatography, MALDI-TOF mass spectrometry, reversed-phase HPLC, and sandwich immunoassay. It was demonstrated that the final eluate of the affinity column is of exceptional purity (98.4%) determined by HPLC and detection at 220 nm. The scale-up of our proposed method seems to be straightforward, which opens the way to the large-scale production of such nanomaterials. This highly improved protocol may facilitate the use and implementation of plant viruses as nanotechnological platforms for in vitro and in vivo applications.

Goals: To use visual logistics for interpreting COVID-19 molecular and rapid antigen test (RAgT) performance, determine prevalence boundaries where risk exceeds expectations, and evaluate benefits of recursive testing along home, community, and emergency spatial care paths. Methods: Mathematica/open access software helped graph relationships, compare performance patterns, and perform recursive computations. Results: Tiered sensitivity/specificity comprise: T1) 90%/95%; T2) 95%/97.5%; and T3) 100%/≥99%, respectively. In emergency medicine, median RAgT performance peaks at 13.2% prevalence, then falls below T1, generating risky prevalence boundaries. RAgTs in pediatric ERs/EDs parallel this pattern with asymptomatic worse than symptomatic performance. In communities, RAgTs display large uncertainty with median prevalence boundary of 14.8% for 1/20 missed diagnoses, and at prevalence >33.3-36.9% risk 10% false omissions for symptomatic subjects. Recursive testing improves home RAgT performance. Home molecular tests elevate performance above T1, but lack adequate validation. Conclusions: Widespread RAgT availability encourages self-testing. Asymptomatic RAgT and PCR-based saliva testing present the highest chance of missed diagnoses. Home testing twice, once just before mingling, and molecular-based self-testing help avoid false omissions. Community and ER/ED RAgTs can identify contagiousness in low prevalence (<22%). Real-world trials of performance, cost-effectiveness, and public health impact could identify home molecular diagnostics as the optimal diagnostic portal.

A Wireless Body Area Sensor Network (WBASN) is combination of numerous sense nodes, positioned onto/close or inside a person body. Wireless Body Area Sensor Networks (WBASN) is a developing automation trend that exploits wireless sensor nodes to put instantaneous wearable well-being of ill person to improve individual’s existence. The sensor nodes might be used outwardly to observe abundant health parameters (like heart activity, blood pressure and cholesterol) of an ill person at a vital site within hospital. Hence the goal of WBASN is much crucial, enhancing the lifetime of nodes is compulsory to sustain many issues such as utility and efficiency. It is essential to evaluate time that when the first node will die it we want to refresh or change the battery reason is that loss of crucial information is not tolerable. The lifetime is termed as the time interval when a first node dies out due to battery exhaustion. In our proposed protocol life time of a network is the main concern as well other protocol related issues such as throughput, path loss, and residual energy. Bio-sensors are used for deployment on human body. Poisson distribution and equilibrium model techniques have been used for attaining the required results. Multi-hop network topology and random network node deployment used to achieve minimum energy consumption and longer network lifetime.

Time, traditionally viewed as a linear, non-dynamic parameter, is re-envisioned in this study as a Hyperdimensional concept. This paper conducts a cross-disciplinary examination, critically analysing the conceptualization of time in classical mechanics, quantum mechanics, and cosmology to propose a ground breaking reconceptualisation that extends beyond conventional frameworks. In classical mechanics, time is perceived as an absolute, continuously progressing backdrop, largely independent of events. Quantum mechanics treats time as a static parameter that does not influence quantum states but provides a framework for their evolution. In cosmology, time is considered a dimension that emerges from the Big Bang and serves as a measure for the universe's expansion, yet it does not interact with the structural dynamics of the cosmos. Challenging the transformative insights of Einstein’s relativity, which merges time with spatial dimensions under extreme conditions, we advocate for a perspective that views time as a Hyperdimensional and universal constant. This perspective posits that time, despite its unique and intrinsic properties, does not dynamically interact with or alter physical phenomena. Instead, it underpins our understanding of phenomena across different scales—from the minutiae of quantum states to the macroscopic dynamics of cosmology—without direct causation or change. A critical examination of time dilation and relativistic assumptions reveals significant discrepancies in traditional interpretations, particularly in how they are applied across different physical contexts. Our findings challenge the uniform applicability of time dilation, suggesting that observed phenomena often attributed to relativistic effects might better be explained through non-relativistic mechanisms such as phase shifts or changes in wavelength rather than temporal dilation. By synthesizing insights from various scientific domains, we advocate for a unified theory that recognizes time as a fundamental, universal dimension that is conceptual and non-interactive. Our goal is to bridge existing gaps between diverse scientific interpretations and promote a more integrated, profound understanding of time's autonomous and intrinsic nature.

Due to the ongoing global warming on the Earth, permafrost degradation has been extensively taking place, which poses a substantial threat to civil and industrial facilities and infrastructure elements, as well as to the utilization of natural resources in the Arctic and high-latitude regions. In order to prevent the negative consequences of permafrost thawing under the foundations of constructions, various geophysical techniques for monitoring permafrost have been proposed and applied so far: temperature, electrical, seismic and many others. At the same time, non-stationary electromagnetic methods seem to have significant potential and a number of important practical advantages. We propose a cross-borehole exploration system for the highest localization of target objects in the cryolithozone. A novel mathematical apparatus for three-dimensional modeling of transient electromagnetic (TEM) signals by the vector finite element method has been developed. The original combination of the latter, the Sumudu integral transform and artificial neural networks makes it possible to examine spatially heterogeneous objects of the cryolithozone with a high contrast of geoelectric parameters, significantly reducing computational costs. We have studied the sensitivity of the TEM signals to the boundary between thawed and frozen rocks depending on the inter-borehole distance and spatial orientations of the transmitters and receivers. Numerical simulation results of the TEM monitoring of industrial facilities located on permafrost are considered. The formation of a talik has been shown to significantly manifest itself in the measured electromagnetic responses, which enables timely prevention of industrial disasters and environmental catastrophes.

Ridge regression is one of the most popular shrinkage estimation methods for linear models. Ridge regression effectively estimates regression coefficients in the presence of high-dimensional regressors. Recently, a generalized ridge estimator was suggested by generalizing the uniform shrinkage of ridge regression to the non-uniform shrinkage, which was shown to perform well under sparse and high-dimensional linear models. In this paper, we introduce our newly developed R package “g.ridge” (the first version published on 2023-12-07 at https://cran.r-project.org/package=g.ridge) that implements both the ridge estimator and generalized ridge estimators. The package equips with the generalized cross-validation for automatic estimation of shrinkage parameters. The package also includes a convenient tool for generating a design matrix. By simulations, we test the performance of the R package under sparse and high-dimensional settings with the normal and skew-normal error distributions. From the simulation results, we conclude that the generalized ridge estimator is superior to the benchmark ridge estimator based on “glmnet”, and hence, it can be the most recommended estimator under sparse and high-dimensional models. We demonstrate the package using the intracerebral hemorrhage data.

This cross-country four-year longitudinal study investigated the development of processing speed throughout primary school education. The analyses were conducted on data collected from 441 schoolchildren in Grades 1, 2, 3 and 4 (aged 6.42 to 11.85 years) in the Kyrgyzstan and Russia. Mixed effects growth modeling was applied to estimate average and individual growth trajectories for processing speed at two cross-country samples. Latent class growth modeling was conducted to identify different types of growth trajectories for processing speed and to compare the distribution of the types within the analyzed samples. According to the results, processing speed significantly increases across primary school years. The trajectory is characterized by nonlinear changes with more intensive growth between Grades 1 and 2, which later slows down until Grade 4. There were no significant cross-country differences in the initial score of processing speed or developmental changes in processing speed across primary school years. The development of processing speed is described by a model with three quadratic growth types but minimally differs. It is concluded that in both samples, the development of processing speed may be characterized by homogeneity, with the most intensive growth from Grade 1 to Grade 2 and subsequent linear improvement until Grade 4.

Despite successful vaccination efforts, the emergence of new SARS-CoV-2 variants poses ongoing challenges to control COVID-19. Understanding humoral responses concerning SARS-CoV-2 infections and their impact is crucial for developing future vaccines that are effective worldwide. Here, we identified 41 immunodominant linear IgG B-cell epitopes in its Spike glycoprotein with a SPOT synthesis peptide array probed with a pool of serum from hospitalized COVID-19 patients. Bioinformatics showed a restricted set of epitopes unique to SARS-CoV-2 compared to other coronavirus family members. Potential crosstalk was also detected with Dengue virus (DENV), confirmed by screening individuals infected with DENV before the COVID-19 pandemic in a commercial ELISA assay for anti-SARS-CoV-2 antibodies. Higher reactivity indices were often measured in individuals with a pre-pandemic dengue infection than those with COVID-19. A high-resolution evaluation of antibody reactivity against peptides representing epitopes in the spike protein identified ten sequences in the NTD, RBD, and S2 domains. Functionally, antibody-dependent enhancement (ADE) in SARS-CoV-2 infection of monocytes was observed with pre-pandemic dengue-positive sera. A significant increase in viral load was measured compared to controls, with no detectable neutralization or considerable cell death, suggesting its role in viral entry. This study highlights the importance of identifying the epitopes generated during the humoral response to a pathogenic infection to understand the potential interplay of previous and future conditions on disease. Vaccine development and optimization strategies should be mindful of the potential for A.D.E. that could differ geographically due to endemic biological risks.

This study investigated defect formation and strain distribution in high Mg content Al-Mg alloys during normal rolling and cross-rolling processes. The finite element analysis (FEA) revealed the presence of wave defects and strain localization-induced zipper cracks in normal cold rolling, which were confirmed by experimental results. The concentration of shear strain played a significant role in crack formation and propagation. However, the influence of wave defects was minimal in the cross-rolling process, which exhibited a relatively uniform strain distribution. Nonetheless, strain concentration at the edge and center regions led to the formation of zipper cracks and edge cracks, with more pronounced propagation observed in the experiments compared to FEA predictions. Furthermore, texture evolution was found to be a crucial factor affecting crack propagation, particularly with the development of the Goss texture component which is observed by electron backscattered diffraction analysis at bending points. The Goss texture hindered crack propagation, while the Brass texture allowed cracks to pass through. This phenomenon was consistent with both FEA and experimental observations. To mitigate edge crack formation and propagation, potential strategies involve promoting the formation of the Goss texture at the edge through alloy and process conditions, as well as implementing intermediate annealing to alleviate stress accumulation. These measures can enhance the overall quality and reliability of Al-Mg alloys during cross-rolling processes. In summary, understanding the mechanisms of defect formation and strain distribution in Al-Mg alloys during rolling processes is crucial for optimizing their mechanical properties. The findings of this study provide insights into the challenges associated with wave defects, strain localization, and crack propagation. Future research and optimization efforts should focus on implementing strategies to minimize defects and improve the overall quality of Al-Mg alloys in industrial applications.

This proposal was prepared in the very first weeks of 2020 because of the outbreak of COVID-19. There are good reasons to suppose that rotavirus vaccine can be used as protection tool to effectively and safely fight and mitigate SARS-CoV-2 infection and the impact caused by COVID- 19 in adult humans, due to the development of cross and trained immunity following rotavirus vaccination. Up-to-date, some rotavirus vaccines are available and approved, two of them have a large experience in results and safety. Little experience has been achieved in the use of rotavirus vaccine in adults. However, it can be expected that it would be safe and effective in adults and in the elderly as well. This proposal explains the background of this hypothesis based on lungs and intestine relationships.

Background and Objectives: Ultrasound (US) is a non-invasive tool for the in-vivo detection of peripheral nerve alterations. Materials and Methods: In this study we applied nerve US to assist the discrimination between the spectrum of Amyotrophic Lateral Sclerosis (ALS, n=11), chronic inflammatory demyelinating polyradiculoneuropathy (CIDP, n=5) and genetically confirmed Charcot-Marie-Tooth disease (CMT, n=5). All participants and n=15 controls without neurological diseases underwent high-resolution US of the bilateral tibial nerve. Nerve cross-sectional area (CSA) and nerve microvascular blood flow were compared between the groups and related to cerebrospinal fluid (CSF) measures, clinical symptoms and nerve conduction studies. Analyses are part of a larger multimodal study on the comparison between US and 7 Tesla (T) magnetic resonance neurography (MRN). Results: Patients and controls were matched with respect to their demographical data. CMT had the longest disease duration, followed by CIDP and ALS. CSA was related to age, weight and disease duration. CSA was larger in CMT and CIDP compared to ALS and controls. Blood flow was greatest in CIDP, and higher than in CMT, ALS and controls. In ALS, greater CSA was correlated with greater CSF total protein and higher albumin quotient. US measures did not correlate with clinical scores or nerve conduction studies in any of the subgroups. Conclusion: Our results point towards the feasibility of CSA and blood flow to discriminate between ALS, CIDP and CMT, even in small sample sized groups. In ALS, larger CSA could indicate an inflammatory disease subtype characterized by reduced blood-nerve barrier integrity. Our upcoming analysis will focus on the additive value of 7T MRN in combination with US to disentangle the spectrum between more inflammatory or more degenerative disease variants along the disease groups.

The potentially active A subunit of coagulation factor XIII (FXIII-A) is an intracellular transglutaminase expressed in various cell types including platelets and monocytes/macrophages. It is involved in stabilizing protein structures by cross-linking through Nε-(?-L-glutamyl)-L-lysyl iso-peptide bonds. Macrophages are major cellular constituents of the atherosclerotic plaque and are important in determining its structural/functional features. Two of their important functions are the accumulation of oxidized LDL in the lipid core, and by cross-linking structural proteins they may stabilize the plaque and protect the thrombi of atherogenic origin against fibrinolytic degradation. It is important to know whether these functions operate in parallel utilizing the same cellular compartments. First, we showed that monocyte-derived human macrophages significantly increase their FXIII-A content when up-taking oxidized LDL. This phenomenon is very likely independent of the process of transformation into foam cells, as the transformation of vascular smooth muscle cells into foam cells fails to result in the expression of FXIII-A. FXIII containing macrophage-like cells are abundant in the plaque and FXIII-A is also present in the extracellular core. Several cells co-stained for FXIII-A and for Oil Red O suggest that expression of FXIII-A and lipid up-take are common features of macrophages present in the atherosclerotic plaque.

The 2-oxoglutarate dehydrogenase complex (OGDHc) is a key enzyme in the TCA cycle and represents one of the major regulators of mitochondrial metabolism through NADH and reactive oxygen species levels. The OGDHc impacts cell metabolic and cell signaling pathways through the coupling of 2-oxoglutarate metabolism to gene transcription related to tumor cell proliferation and aging. DHTKD1 is a gene encoding 2-oxoadipate dehydrogenase (E1a), which functions in the L-lysine degradation pathway. The potentially damaging variants in DHTKD1 have been associated to the (neuro) pathogenesis of several diseases. Evidence was obtained for the formation of a hybrid complex between the OGDHc and E1a, suggesting a potential cross talk between the two metabolic pathways and raising fundamental questions about their assembly. Here we reviewed the recent findings and advances in understanding of protein-protein interactions in OGDHc and 2-oxoadipate dehydrogenase complex (OADHc), an understanding that will create a scaffold to help design approaches to mitigate the effects of diseases associated with dysfunction of the TCA cycle or lysine degradation. A combination of biochemical, biophysical and structural approaches such as chemical cross-linking MS and cryo-EM appears particularly promising to provide vital information for the assembly of 2-oxo acid dehydrogenase complexes, their function and regulation.

Urethral pain syndrome (UPS) is still a pathology in which the diagnosis is formulated as a "diagnosis of exclusion". The exact pathogenetic mechanisms are not yet fully understood and clear recommendations for the prevention and treatment of UPS are absent. The goal of the study was to assess the condition of the tissues in the female urethra in UPS, by using transvaginal ultrasound (TVUS) and cross-polarization optical tomography (CP OCT). TVUS showed an expansion in the diameter of the internal lumen of the urethra, especially in the proximal region compared with the norm. Compression elastography revealed areas with increased stiffness (presence of fibrosis) in urethral and surrounding tissues. When studied with CP OCT it was shown that with UPS, the structure of the tissues in most cases was changed: trophic alterations in the epithelium (hypertrophy or atrophy) and fibrosis of underlying connective tissue were observed. The proximal fragment of the urethra with UPS underwent changes identical to those of the bladder neck. This paper showed that the introduction of new technology — CP OCT — in conjunction with TVUS will allow verification of structural changes in tissues of the lower urinary tract at the level of their architectonics and will help doctors understand better the basics of the UPS pathogenesis.

Direct laser writing three-dimensional nano-lithography is an established technique for manufacturing functional 3D micro- and nano-objects via non-linear absorption induced polymerization process. In this Chapter an underlying physical mechanisms taking place during nano-confined polymerization reaction, induced by tightly focused ultra-short laser pulses, are reviewed and discussed. The special attention is paid on the effects that directly impact structuring resolution and minimum achievable feature size. Analysis of possible photo-initiation mechanisms as contributing multi-photon absorption and avalanche ionization in pre-polymers under diverse exposure conditions (wavelength, pulse duration) is presented. Feasible structuring of pure (non-photosensitized) and functional nanoparticles doped polymer precursors is justified and benefits of such materials/structures for microoptics, photonics and cell scaffolds are highlighted. The influence of temperature effects (induced by writing process itself or determined by ambient conditions) on polymerization process, observed in different pre-polymers under diverse exposure regimes is outlined. The further adjustment of the structuring resolution is possible via precise control of light polarization and diffusion assisted radical quenching. The work is concluded with a brief outlook on future challenges and perspectives related to refinement of 3D ultra-fast laser lithography fabrication process in the means of application of diverse post-processing methods and research into novel photo-curable materials including inorganic ones.

We have studied Juniperus oxycedrus subsp. badia in the central and southern Iberian Peninsula. Here, the macrobioclimate ranges from Mediterranean-pluviseasonal-oceanic and Mediterranean-pluviseasonal-continental, thermotype from thermomediterranean and supramediterranean. The relevés were taken following the Braun-Blanquet phytosociological methodology. A statistical treatment was applied to establish a separation among Juniperus communities. To understand the presence of Juniperus communities in territories dominated by species of the genus Quercus, we applied the formula of Thornthwaite to calculate potential evapotranspiration. The general cluster analysis clearly separates two groups of plant communities and separates the different associations in each group. All plant communities growing on rocky crests and in steeply extreme sloping areas are significantly influenced by the soil. The Ombroclimatic Index does not explain the presence of plant communities influenced by substrate: so, we propose a new Ombroedaphoxeric Index which explains the presence of the Juniperus communities in territories with a thermotype ranging from the thermo to the supramediterranean belt. The areas of distribution of Juniperus species are expanding due to the spread of rocky areas: this phenomenon causes a rise in edaphoxerophilous areas and a decrease in climatophilous one. We propose four new plant associations and with this update on their structures and floristic compositions, it is possible to make an efficient form of conservation in both territories studied (Spain and Portugal) with specific cross-border-cooperation projects.

Since the Sustainable Development Goals (SDGs) came into effect, both UNESCO and other international organisations recommend empowering youth to implement the SDGs in universities. Getting started with the SDGs at university level is of special relevance in pre-service teacher training since future teachers are powerful agents of change in the lives of young people. Future teachers need to acquire competencies in sustainability to be able to promote meaningful changes in sustainable behaviour. To that end, holistic approaches to facilitate their acquirement need to be developed. The aim of this study is to explore which teaching methodologies are suitable for the development of competencies in sustainability in Higher Education (HE) and how to empower students to take a leading role in implementing the SDGs in universities. The participants in the study are a group of 23 students in pre-service teacher training. The experimental educational model used for the development of sustainable competencies consists of a methodological sequence of Project-Oriented Learning (POL) and a Cross-disciplinary Workshop on Sustainable Food. This study provides evidence that a holistic approach is appropriate for developing sustainable competencies and contributes to empowering students to implement SDG 12 at their university.

We examine how observations can be used to evaluate an air quality analysis by verifying against passive observations (i.e. cross-validation) that are not used to create the analysis and we compare these verifications to those made against the same set of (active) observations that were used to generate the analysis. The results show that both active and passive observations can be used to evaluate of first moment metrics (e.g. bias) but only passive observations are useful to evaluate second moment metrics such as variance of observed-minus-analysis and correlation between observations and analysis. We derive a set of diagnostics based on passive observation–minus-analysis residuals and we show that the true analysis error variance can be estimated, without relying on any statistical optimality assumption. This diagnostic is used to obtain near optimal analyses that are then used to evaluate the analysis error using several different methods. We compare the estimates according to the method of Hollingsworth Lonnberg, Desroziers, a diagnostic we introduce, and the perceived analysis error computed from the analysis scheme, to conclude that as long as the analysis is optimal, all estimates agrees within a certain error margin. The analysis error variance at passive observation sites is also obtained.

The observation that certain therapeutic strategies for targeting inflammation benefit patients with distinct immune-mediated inflammatory diseases (IMIDs) is exemplified by the success of TNF blockade in conditions including rheumatoid arthritis, ulcerative colitis and skin psoriasis, albeit only for subsets of individuals with each condition. This suggests intersecting "nodes" in inflammatory networks at a molecular and cellular level may drive and/or maintain IMIDs, being “shared” between traditionally distinct diagnoses without mapping neatly to a single clinical phenotype. In line with this proposition, integrative tumour tissue analyses in oncology have highlighted novel cell states acting across diverse cancers, with important implications for precision medicine. Drawing upon advances in the oncology field, this narrative review will first summarise learnings from the Human Cell Atlas in health as a platform for interrogating IMID tissues. It will then review cross-disease studies to date that inform this endeavour, before considering future directions in the field.

The COVID-19-medical emergency has ended worldwide, yet there is still a need to evaluate the psychological impact of these years of unprecedented changes on students’ life. Methods: This study aims to assess and compare COVID-19-related stressors (Relationships-and-Academic-Life; Isolation; Fear-of-Contagion) and psychophysical symptoms reported by university students in April-2020, April 2021, and April 2022. The predictive role of COVID-19-related stressors on psychophysical symptoms within each time was also tested. Data were collected among 637 university students in April-2020 (n = 197), April-2021 (n = 200), April-2022 (n = 240). Results: In April-2022, perceived Isolation and Fear-of-Contagion decreased from the peak registered in April-2021, but stress related to Relationships-and-Academic-Life remained noteworthy high. A sharp and ongoing increase in psychophysical symptoms was found, with more than 50% of students reporting clinical levels of Sleep-Disorders, Depression, Psychoticism, and Interpersonal-Sensitivity. In April-2022, students still perceiving stress related to Relationships-and-Academic-Life and Isolation were at risk for Anxiety, Somatization, and Sleep-Disorders, while those still perceiving stress related to Fear-of-Contagion were also at risk for Depression, Obsessive-Compulsive, and Psychoticism. Conclusion: Findings emphasized the long-lasting detrimental effects of the COVID-19-related stress. Interventions must pinpoint the complex post-pandemic adjustment process and their effects on university students' psychophysical health.

With the aim to develop novel scaffolds for sustained release of drugs, we initially developed an easy approach for the synthesis of α,ω-homobifunctional mercaptoacyl poly(alkyl oxide)s. This was based on the esterification of the terminal hydroxyl groups of poly(alkyl oxide)s with suitably S-4-methoxytrityl (Mmt) protected mercapto acids, followed by removal of the acid labile S-Mmt group. This method allowed the efficient synthesis of the title compounds in high yield and purity, which were further used in the development a thioether cross-linked liposome scaffold, by thia-Michael reaction of the terminal thiol groups with preformed nano-sized liposomes bearing maleimide groups on their surface. The reaction process was followed by 1H-NMR, using a Carr-Purcell-Meiboom-Gill (CPMG) relaxation dispersion NMR experiment (1H-NMR CPMG), which allowed real-time monitoring and optimization of the reaction process. The thioether cross-linked liposomal scaffold that was synthesized was proven to preserve the nanosized characteristics of the initial liposomes and allowed sustained release of calcein (which was used as a chromophore), providing evidence for the efficient synthesis of a novel drug release scaffold consisted of nanoliposome building blocks.

Several studies in computer vision have examined specular removal, which is crucial for object detection and recognition. This research has traditionally been divided into two tasks: specular highlight removal, which focuses on removing specular highlights on object surfaces, and reflection removal, which deals with specular reflections occurring on glass surfaces. In reality, however, both types of specular effects often coexist, making it a fundamental challenge that has not been adequately addressed. Recognizing the necessity of integrating specular components handled in both tasks, we constructed a Specular-Light (S-Light) DB for training single-image-based deep learning models. Moreover, considering the absence of benchmark datasets for quantitative evaluation, the Multi-Scale Normalized Cross Correlation (MS-NCC) metric, which considers the correlation between specular and diffuse components, was introduced to assess the learning outcomes.

Structure and reversibility of cross-link junctions play pivotal roles in deter- mining the nature of thermoreversible gelation and dynamic mechanical prop- erties of the produced polymer networks. We attempt to explore new types of sol–gel transitions with mechanical sharpness by allowing cross-links to grow without upper bound. We consider thermoreversible gelation of the primary molecules R{Af} carrying the number f of low molecular weight functional groups (gelators) A. Gelators A are assumed to form supramolecular assemblies. Some examples are: telechelic polymers (f = 2) carrying π–π stacking benzene derivatives at their both ends, trifunctional star molecules (f = 3) bearing mul- tiple hydrogen-bonding gelators. The sol–gel transition of the primary molecules becomes sharper with the cooperativity parameter of the stepwise linear growth of the cross-links. There is a polymerization transition (crossover without singu- larity) of the junctions in the postgel region after the gel point is passed. If the gelator A tends to form supramolecular rings competitively with linear chains, there is another phase transition in the deep postgel region where the average molecular weight of the rings becomes infinite (Bose-Einstein condensation of rings). As a typical example of binary cross-links where gelators A and B form mixed junctions, we specifically consider metal-coordinated binding of ligands A by metal ions B. Two types of multi-nuclear supramolecular complexes are studied: (i) linear stacking (ladder) of the sandwich A2B units, (ii) linear train of egg-box A4B units. The average molecular weight, the gel fraction, the av- erage length of the cross-link junctions are calculated for all of these models as functions of the functionality f, the concentration of the solute molecules, and temperature. Potential candidates for the realization of these new types of thermoreversible gelation are discussed.

Through an investigation of recently discovered Incantation of Wish-Fulfillment amulets from the Silla kingdom, this paper reveals that early Korea had more diverse forms of dhāraṇī practices than previously assumed. This paper’s analysis of these amulets from Korea contributes toward filling the gap in our current understanding of the material practice pertaining to the Incantation of Wish-Fulfillment widely practiced in medieval East Asia. Based on an interdisciplinary analysis of the two amulet sheets of the Incantation of Wish-Fulfillment from Silla, this paper explored hitherto unknown aspects of early Korean dhāraṇī practice. Previously, the only material dhāraṇī practice in early Korea was thought to be the enshrinement of textual relics in pagodas based on the Pure Light Incantation, which has little connection to contemporaneous Chinese dhāraṇī practice. However, the newly discovered Incantation of Wish-Fulfillment amulets, whose date this paper inferred to be between the eighth and ninth century, show that the Unified Silla also had a dhāraṇī practice closely linked to the Chinese practice. However, unlike the Chinese Incantation of Wish-Fulfillment amulets that were buried in tombs, the Silla amulets were likely enshrined in one of the pagodas erected on Mount Nam, Gyeongju. At the same time, the Silla epigraph from Myogilsang Pagoda at Haeinsa shows that the Incantation of Wish-Fulfillment was placed in the pagoda so as to wish for good afterlives of the soldiers who died at the battle, suggesting that placing the Incantation of Wish-Fulfillment in a pagoda had a function similar to that of burying the Chinese amulet in the tomb.

Observations of ocean surface winds from Indian scatterometer SCATSAT-1 have been combined with background wind field from a numerical weather prediction (NWP) model available at National Centre for Medium Range Weather Prediction (NCMRWF) to generate a 6-hourly gridded hybrid wind product. A distinctive feature of the study is to produce a global gridded wind field from SCATSAT-1 scatterometer passes with spatio-temporal data gaps at regular synoptic hours relevant for forcing models and other NWP studies. This is done by making use of concepts from the modern particle filter technique, which does not represent the model probability density function (PDF) following the Gaussian technique. The 6 hourly hybrid wind is generated for the entire year of 2018 and is validated using the wind speed from daily gridded level-4 SCATSAT-1 winds (L4AW), Cross Calibrated Multi-Platform dataset (CCMP) and global buoy data from National Data Buoy Centre (NDBC). The results indicate potential of the technique to produce scatterometer winds at the desired temporal frequency with significantly less noise and along swath biases. The study shows the generated hybrid winds have very high quality with respect to the already existing daily product available from ISRO.

This paper presents an analytical method for determining the bending stresses and deformations in prismatic noncircular profile shafts with trochoidal cross sections. The so-called higher trochoids can be used as form-fit shaft–hub connections. Hybrid (mixed) higher trochoids (M-profiles) were proposed in [1] and adapted to a practical industrial application in [2]. M-profiles combine the advantages of standardised polygon (DIN 32711 [3]) and spline (DIN 5486 [4]) contours used as shaft–hub connections for the transmission of torsional loads. In this study, the geometric and mechanical properties of the higher hybrid trochoids were investigated using complex functions to simplify the calculations. The pure bending stress and shaft deflection were determined for M-profiles using the bending theory formulated by Muskhelishvili [5]. The loading cases consisted of static and rotating bends. Analytical, numerical, and experimental results agreed well.

(1) Background: Sensing of critical events or flow signatures in nature often presents itself as a coupled interaction between a fluid and arrays of slender flexible beams, such a wind-hairs or whiskers. It is hypothesized that important information is gained in highly noisy environments by the inter-correlation within the array. (2) Methods: The present study uses a model sea lion head with artificial whiskers in the form of slender beams (optical fibres), which are subjected to a mean flow with overlaid turbulent structures generated in the wake of a cylinder. Motion tracking of the array of fibres is used to analyse the correlation of the bending deformations of pairs of fibres. (3) Results: Cross-correlation of the bending signal from tandem pairs of whiskers proves that the detection of vortices and their passage along the animals head is possible even in noisy environments. The underlying pattern, during passage of a vortex core, is a jerk-like response of the whiskers, which can be found at later arrival-times in similar form in the downstream whisker's response. (4) Conclusion: Coherent vortical structures can be detected from cross-correlation of pairs of cantilever-beam like sensors even in highly turbulent flows. Such vortices carry important information within the environment, e.g. the underlying convection velocity. More importantly in nature, these vortices are characteristic elementary signals left by prey and predators. The present work can help to further develop flow, or critical event, sensory systems which can overcome high noise levels due to the proposed correlation principle.

Microglial cells, the resident macrophages of the CNS, exist in a process-bearing, ramified/surveying phenotype under resting conditions. Upon activation by cell damaging factors they get transformed to an amoeboid phenotype releasing various cell products including pro-inflammatory cytokines, chemokines, proteases, reactive oxygen/nitrogen species and the excytotoxic ATP and glutamate. In addition, they engulf pathogenic bacteria or cell debris and phagocytose them. However, already resting/surveying microglia has a number of important physiological functions in the CNS; they e.g. shield small disruptions of the blood-brain barrier by their processes, dynamically interact with synaptic structures and clear surplus synapses during development. In neurodegenerative illnesses they aggravate the original disease by a microglia-based compulsory neuroinflammatory reaction. Therefore, the blockade of this reaction improves the outcome of Alzheimer’s disease, Parkinson’s disease, multiple sclerosis, amyotrophic lateral sclerosis, etc. The function of microglia is regulated by a whole array of purinergic receptors classified as P2Y12, P2Y6, P2Y4, P2X4, P2X7, A2A, A3, and being targets for endogenous ATP, ADP, or adenosine. ATP is sequentially degraded by the ecto-nucleotidases and 5’-nucleotidase enzymes to the weak adenosine agonist inosine as an end-product. The appropriate selective agonists/antagonists for purinergic receptors as well as the respective enzyme inhibitors may profoundly interfere with microglial functions and reconstitute the homeostasis of the CNS disturbed by neuroinflammation.

The concept of sustainable management in culture has been recognised in global strategic documents on sustainable development for more than a decade. It is also increasingly reflected in the cultural polices of particular states, and – very importantly –cultural managers responsible for shaping the cultural offer in cities are becoming more interested in this concept. Despite the increasing attention being paid to this topic among both practitioners and theoreticians of management, in none of these documents or other works can we find any content directly related to the possibility of applying this concept in a town which, due to political turmoil, has been divided by a national border. Hence, this gap was the direct impulse for taking up research in this field. In the article, by using different notions of the market, our own definition of a cross-border market for cultural services was developed, and the conditions for the functioning of this market were presented based on the example town of Cieszyn (Poland) and Český Těšín (Czech Republic). In the opinion of the authors of the article, the development and functioning of a cross-border market for cultural services is essential for the application of the concept of sustainable management of the cultural offer in a town divided by a border. For the purpose of the article, a survey and individual interviews with experts shaping the cultural offer in Cieszyn and Český Těšín were conducted. The results of the research prove that despite numerous cross-border Czech-Polish projects carried out by cultural institutions, there are still many barriers in the town which make it difficult for the residents to benefit from the cultural offer available on the other side of the border. These barriers limit the full implementation and application of the concept of sustainable management of the cultural offer.

The Western Balkans region is persistently vulnerable to natural hazards, inadequate infrastructure, and limited institutional capacities, necessitating a collaborative approach to disaster risk management. This paper presents a comprehensive project led by the Scientific-Professional Society for Disaster Risk Management (NSD-URVs) in Belgrade, aiming to establish and strengthen a regional network of experts in disaster risk management. The project focuses on building expertise, facilitating knowledge exchange, promoting expert coordination, and enhancing cross-border collaboration. Key activities include developing a web platform, organising an international conference, and advocating for regional policies that integrate best practices and innovations in disaster risk management. The expected outcomes are the establishment of a cohesive network, enhanced expertise and coordination, and improved preparedness and responsiveness to disasters. By leveraging collective expertise and resources, this initiative aims to fortify the region's resilience against potential disasters. Addressing the identified gaps and implementing the proposed policy recommendations can significantly enhance the region's resilience to natural hazards. Future research should focus on the implementation and impact of these recommendations to ensure continuous improvement in disaster preparedness and response.

This study explores the complexities of risk communication practices in orthodontics, specifically examining the perspectives of orthodontists in Greece and Slovakia. Informed by the foundational importance of effective communication in health sciences, particularly in facilitating valid consent and shared decision-making, this research addresses gaps identified in the literature concerning the consistent communication of potential treatment risks based on demographic and cultural characteristics. The study identifies 15 potential critical risks with orthodontic treatment. These risks include root necrosis; temporary undesired changes to the occlusion; sleep difficulties; not achieving an ideal result; development of black triangles between teeth; taking additional X-rays; speech difficulties; using a protective splint during sports; duration of treatment; number of visits; transmission of infectious diseases; and swallowing orthodontic appliances. The questionnaire, distributed electronically to orthodontists in Greece (n=570) and Slovakia (n=210) from Sept. 2022 to Dec. 2022, aimed to assess risk communication practices, with consideration to country, gender, and degree-related variations. 168 valid questionnaires (91 from Slovakia and 77 from Greece) were obtained indicating significant disparities in the risks emphasized and preferred forms of consent. The Greek orthodontists focused more on the risks involved such as on relapse, root resorption, temporal occlusal changes, and failure of desired movement, while the Slovak practitioners tend to be interested more about sleeping difficulties, temporal occlusal changes and not achieving an ideal result. They also tend to obtain written or digital consent from patients or their parents/guardians more frequently than the Greek team. Male orthodontists discussed specific risks more frequently, including relapse and extractions, whereas females preferred written or digital consent. PhD-trained orthodontists prioritized certain risks, indicating the need for tailored approaches. This study underscores the dynamic nature of risk assessment in orthodontic practice, emphasizing its ethical and strategic dimensions. The findings advocate for tailored risk communication strategies, that recognize individual, contextual, and cultural factors and the need of an orthodontic informed consent protocol for tailored communication approach for patients to elevate the standard of care in European orthodontics. The reliance on digital tools reflects contemporary trends in enhancing patient understanding, thereby supporting ongoing innovation in orthodontic practices.

A cross-flow ultrafiltration harvesting system of a pre-concentrated microalgae culture was tested in an innovative anaerobic-based WRRF. The microalgae culture was cultivated in a membrane photobioreactor fed with the effluent from an anaerobic membrane bioreactor treating sewage. These harvested microalgae biomass was then anaerobically co-digested with primary and secondary sludge from the water line. Depending on the needs of this anaerobic co-digestion, the filtration harvesting process was evaluated intermittently over a period of 212 days for different operating conditions, mainly the total amount of microalgae biomass harvested and the desired final total solids concentration (up to 15.9 g·L1 with an average of 9.7 g·L1). Concentration ratios of 15-27 were obtained with average transmembrane fluxes ranged from 5 to 28 L·m2·h1. Regarding membrane cleaning, both backflushing and chemical cleaning resulted in transmembrane flux recoveries that were, on average, 21% higher than those achieved with backflushing alone. The carbon footprint assessment shows promising results as the GHG emissions associated with the cross-flow ultrafiltration harvesting process could be less than the emissions savings associated with the energy recovered from the biogas production from the anaerobic valorisation of the harvested microalgae.

In this paper, we propose a reconfigurable intelligent surface (RIS) that can dynamically switch the transmission and reflection phase of incident electromagnetic waves in real time to realize the dual-beam or quad-beam and convert polarization of the transmitted beam. Such surfaces can redirect a wireless signal at will to establish robust connectivity when the designated line-of-sight channel is disturbed, thereby enhancing the performance of wireless communication systems by creating an intelligent radio environment. When integrated with a sensing element, they are integral to performing joint detection and communication functions in future wireless sensor networks. In this work, we first analyze the scattering performance of a reconfigurable unit element and then design a RIS. The dynamic field scattering manipulation capability of the RIS is validated by full-wave electromagnetic simulations to realize six different functions. The scattering characteristics of the proposed unit element, which incorporates two p-i-n diodes, have been substantiated through practical implementation. This involved the construction of a simple prototype and the subsequent examination of its scattering properties via the free-space measurement method. The obtained transmission and reflection coefficients from the measurements are in agreement with the anticipated outcomes from simulations.

Long unpunctuated texts containing complex linguistic sentences are a stumbling block to processing any low-resource languages. Thus, approaches that attempt to segment lengthy texts with no proper punctuation into simple candidate sentences are a vitally important preprocessing task in many hard-to-solve NLP applications. In this paper, we propose (PDTS) a punctuation detection approach for segmenting Arabic text, built on top of a multilingual BERT-based model and some generic linguistic rules. Furthermore, we showcase how PDTS can be effectively employed as a text tokenizer for unpunctuated documents (i.e., mimicking the transcribed audio-to-text documents). Experimental findings across two evaluation protocols (involving an ablation study and a human-based judgment) demonstrate that PDTS is practically effective in both performance quality and computational cost.

This paper presents an approach to the elastic analysis of beams subjected to Saint-Venant torsion using Green’s theorem and the finite difference method (FDM). The Saint-Venant torsion of beams, also called free torsion or unrestrained torsion, is characterized by the absence of axial stresses due to torsion; only shear stresses are developed. A solution to this torsion problem consists of finding a stress function that satisfies the governing equation and the boundary conditions. The FDM is an approximate method for solving problems described with differential equations; it does not involve solving differential equations, equations are formulated with values at selected nodes of the structure. In this paper, the beam’s cross-section was discretized using a two-dimensional grid and additional nodes were introduced on the boundaries. The introduction of additional nodes allowed us to apply the governing equations at boundary nodes and satisfy the boundary conditions. Beams with solid sections as well as multiply connected cross-sections were analyzed using this model; shear stresses and localized stresses at reentrant corners, torsion constant, and warping displacements were determined. Furthermore, beams with thin-walled closed sections, single-cell or multiple-cell, were analyzed using the Prandtl stress function whereby a linear distribution of the shear stresses over the thickness was considered; closed-form solutions for shear stresses and torsion constant were derived. The results obtained in this study showed good agreement with the exact results for rectangular cross-sections, and the accuracy was increased through a grid refinement. For thin-walled closed sections, the shear stresses obtained at the centerline using the closed-form solutions were in agreement with the values using Bredt’s analysis but the maximal values in the cross-section, which did not necessarily occur at the position with the smallest thickness, were higher; in addition, the results using the closed-form solutions were in good agreement with those using FDM.

Transverse momentum spectra of +, p, Λ, Ξ or ¯Ξ+, Ω or ¯Ω+ and deuteron (d) in different centrality intervals in Gold-Gold (Au-Au) and Lead-Lead (Pb-Pb) collisions at 62.4 GeV and 2.76 TeV respectively, are analyzed by the blast wave model with Boltzmann Gibbs statistics. We extracted Kinetic freeze out temperature,transverse flow velocity and kinetic freezeout volume from the transverse momentum spectra of the particles. It is observed that the non-strange and strange (multi-strange) particles freezeout separately due to different reaction cross-sections. While the freezeout volume and transverse flow velocity are mass dependent which decrease with the rest mass of the particles. The present work reveals the scenario of double kinetic freezeout in collisions at STAR and ALICE Collaborations. Furthermore, the kinetic freezeout temperature and freezeout volume are larger in central collisions than the peripheral collisions and they decrease from central to periphery. However the transverse flow velocity remains almost unchanged from central to peripheral collisions.

Abstract Introduction:The Robert Koch Institute (RKI) managed the exchange of cross-border contact tracing data between public health authorities (PHA) in Germany and abroad during the COVID-19 pandemic. Aim: We aimed to describe the extent of RKI cross-border contact tracing and the challenges experienced. Methods:We analysed cross-border COVID-19 contact tracing events from 03 February to 05 April 2020 using information exchanged through the European “Early Warning Response System” (EWRS) as well as communication with International Health Regulation (IHR) national focal points. We described events by PHA involved, number of contact persons and exposure context. Results:The RKI processed 467 events, initiating contact to PHA 1,099 times (median 1, IQR [1;2]) and sharing data on 5,099 contact persons. Of 327 (70%) events with known exposure context, most common reported were exposures on aircraft 64 (14%), on cruise ships 24 (5%) and exposures related to non-transport contexts 210 (45%). Cruise ship and aircraft exposures yielded higher median numbers of authorities contacted (10[2;16], 4[2;11]) and contact persons (60 [9;269], 2[1;3]) than non-transport related exposures (1[1;6] and 1[1;2]), respectively. The median time spend on contact tracing activities was the highest for cruise ships: 5 days [IQR 3;9]. Conclusion:In the current COVID-19 pandemic cross-border contact tracing is considered a critical component of the outbreak response. While the majority of international contact tracing activities did not relate to exposure events in transport, they contributed substantially to the workload. The numerous communications highlight the need for fast and efficient global outbreak communication channels between PHA.

The early embryonic heart is a multi-layered tube consisting of (1) an outer myocardial tube; (2) an inner endocardial tube; and (3) an extracellular matrix layer interposed between myocardium and endocardium, called “cardiac jelly” (CJ). During the past decades, research on CJ has mainly focused on its molecular and cell biological aspects. This review focuses on the morphological and biomechanical aspects of CJ. Special attention is given to (1) the spatial distribution and fiber architecture of CJ; (2) the morphological dynamics of CJ during the cardiac cycle; and (3) the removal/remodeling of CJ during advanced heart looping stages, which leads to the formation of ventricular trabeculations and endocardial cushions. CJ acts as a hydraulic skeleton displaying striking structural and functional similarities with the mesoglea of jellyfish. CJ not only represents a filler substance, facilitating end-systolic occlusion of the embryonic heart lumen. Its elastic components antagonize the systolic deformations of the heart wall and thereby power the refilling phase of the ventricular tube. Non-uniform spatial distribution of CJ generates non-circular cross sections of the opened endocardial tube (initially elliptic, later deltoid), which seem to be advantageous for valveless pumping. Endocardial cushions arise from non-removed remnants of the original CJ.

Aptamers are versatile oligonucleotide ligands used for molecular recognition of diverse targets. However, application of aptamers to the field of amyloid β-protein (Aβ) has been limited so far. Aβ is an intrinsically disordered protein that exists in a dynamic conformational equilibrium, presenting time-dependent ensembles of short-lived, metastable structures and assemblies that have been generally difficult to isolate and characterize. Moreover, despite understanding of potential physiological roles of Aβ, this peptide has been linked to the pathogenesis of Alzheimer disease, and its pathogenic roles remain controversial. Accumulated scientific evidence thus far highlights undesirable or nonspecific interactions between selected aptamers and different Aβ assemblies likely due to metastable nature of Aβ or inherent affinity of RNA oligonucleotides to β-sheet-rich fibrillar structures of amyloidogenic proteins. Accordingly, lessons drawn from Aβ–aptamer studies emphasize that purity and uniformity of the protein target and rigorous characterization of aptamers’ specificity are important for realizing and garnering the full potential of aptamers selected for recongizing Aβ or other intrinsically disordered proteins. This review summarizes studies of aptamers selected for recognizing different Aβ assemblies and highlights controversies, difficulties, and limitations of such studies.

We present a general theory of estimation of analysis error covariances based on cross-validation as well as a geometric interpretation of the method. In particular we use the variance of passive observation–minus-analysis residuals and show that the true analysis error variance can be estimated, without relying on the optimality assumption. This approach is used to obtain near optimal analyses that are then used to evaluate the air quality analysis error using several different methods at active and passive observation sites. We compare the estimates according to the method of Hollingsworth-Lönnberg, Desroziers et al., a new diagnostic we developed, and the perceived analysis error computed from the analysis scheme, to conclude that, as long as the analysis is near optimal, all estimates agree within a certain error margin.