The Urban heat island (UHI) effect has evolved into one of the key environmental problems affecting urban ecological environment and sustainable development. Based on 52 Urban Thermal Heat spots (UTHSs) with significant differences between land use structure and UGI spatial layout within the influence range of UHI in Shanghai, Landsat-8/9 satellite images were used to construct a high-dimensional data set reflecting the impact of built environment components on urban thermal environment. Descriptive statistical analysis was used to analyze the spatial difference qualitatively. Using stepwise regression model and partial least square regression (PLSR) model, the complex response relationship between UGI pattern differentiation and urban thermal environment in three spatial stratification ranges of UTHSs was quantitatively analyzed. Overall, the statistical explanatory power of the partial least square regression PLSR model is due to the stepwise regression model. The PLSR model points out that moderately increasing the average building height, CA, PLAND, LSI and LPI play a positive role in inhibiting/slowing down the growth of LST (land surface temperature), and the cooling effect of index weights decreases in order. However, the interaction effects of CA×Cohesion×AI×LPI and PLAND×CA×Cohesion×AI×LPI exert relatively small weight on the cooling effect, and according to the results, suggestions such as UGI structure and urban construction layout optimization can effectively alleviate the urban heat island effect are proposed.

Complex atypical endometrial hyperplasia (CAH) carries a high probability of cancer. Intraoperative evaluation of endometrial cancer in cases of CAH has not been reliable. The safety and sensitivity of sentinel lymph node (SLN) sampling has been validated. We aim to evaluate the efficacy and safety of SLN sampling in CAH managed by the da Vinci robotic platform. A total of 113 patients with a preoperative diagnosis of CAH were included in this retrospective cohort study. All underwent a robot assisted total laparoscopic hysterectomy and bilateral salpingo-oophorectomy with 69 patients undergoing SLN sampling. Statistical analysis calculated the probability of cancer, SLN map rate, and surgical complications. Predictors of cancer were evaluated. Forty-seven percent of the entire cohort were diagnosed with endometrial cancer. Median age was 63 years in the SLN cohort (N = 69) and 61 in the No SLN cohort (N = 44) (p= 0.363).  Median BMI was 34 Kg/m2 in the SLN cohort and 40 in the No SLN cohort (p= 0.004). Bilateral SLN map was 92.8% and unilateral SLN map rate was 7.2%. There were no grade 3-4 complications in the SLN cohort, and 4 grade 3-4 complications in the No SLN group (p=0.021). A preoperative diagnosis of CAH bordering on or cannot rule out cancer was the only predictor of cancer.

This Paper delves into the critical role played by fossil fuel-based polymers in promoting United Nations Sustainable Development Goals (SDGs) in the face of challenges brought about by swift population growth, suburbanization, and mechanization. It sheds light on the environmental and energy security recompences of converting plastic waste into biofuels and other valuable energy resources through state-of-the-art processes such as thermochemical conversion and pyrolysis. Besides, the research investigates the utilization of polymers in solar energy, energy storage, and low carbon transportation, emphasizing the inevitability of a dual approach that combines advancements in bio-based polymers and recycling technologies. It highlights the significance of collaborative endeavors involving governments, industries, and communities to overcome the technical, economic, and regulatory complications in transitioning towards a sustainable and circular plastic economy. Eventually, it showcases the potential of fossil fuel-based polymers in fostering a sustainable energy landscape, conducive to decarbonization efforts, and endorsing environmental sustainability.

This article addresses the urbanization model in valley bottom areas in the city of São Paulo, an-alyzed in its urban planning and socio-environmental aspects, and examines the hydrological impacts triggered by its implementation. It argues that sustainable occupation of urbanized hy-drographic basins should be based on environmental criteria in order to attain a sustainable water management regime that can ensure urban and environmental resilience. In the “Introduction,” the article emphasizes that urbanization in São Paulo has neglected the natural features of river basins, promoting the channeling of watercourses, which resulted in floods and inundations. “Theoretical Basics” brings in key concepts related to the environmental approach of drainage infrastructure with gray and green-blue systems. “Methods” details our qualitative research, bibliographical analyzes, referential case studies, and cartographical analyzes (geoprocessing), focusing on a case study in the Jaguaré creek basin. “Results” includes guidelines and recom-mendations for an urbanization model adjusted to valley bottom areas, applicable to new patterns of urban occupation or to the adjustment of existing patterns. “Discussion” explores the concept of “local sustainable self-development,” and “Conclusions” highlights the importance of an inte-grated, multisectoral, and sustainable planning, adjusted to the characteristics of river basins in valley bottom areas, promoting a socially responsible urban occupation, especially in the face of climate change.

Traditional methods of non-metallic materials joining for industrial uses are limited to lasers, or induction or conduction heating. The precision and efficiency for large-scale applications are difficult to be achieved at the same time. Here in this paper, we report a precise microwave welding method induced by localized surface plasmon of metallic macro-gaps under microwave excitation. The proposed method utilizes energy from well-developed commercial microwaver, and benefits from the precision of localized surface plasmon, an oscillating electron cloud excited by electromagnetic waves, which is currently under hot investigation only at micro- or nano-scales. The method is applied to the welding of polymers to solve the problems of complex processing equipment and high processing energy consumption in the traditional welding process, so as to cope with the growing energy and environmental crisis. Finite element numerical simulations are used to study the distribution characteristics of electric fields and temperature fields. The results show that the process is a high quality, efficient, low consumption and environmentally friendly green process compared to traditional polymer welding methods.

Purpose: This study investigates the implementation and impact of maker culture—viewed as a tool for developing green digital skills—in higher education institutions in Hong Kong. Maker culture, a collaborative educational approach, embraces students’ capacity for self-paced, autonomous learning and applies this knowledge to creative problem-solving and innovation, key aspects of sustainability education. Methods: An empirical study was conducted, focusing on the experiences of teachers in the higher education sector in Hong Kong. Eight individuals were interviewed to gain insights into their perceptions and experiences with maker education within sustainability contexts. The sample was limited to ensure cross-sectional comparability and direct weighting of teachers’ experiences within a singular, complementary educational setting. Results: The findings provide valuable insights into the benefits and challenges of integrating maker education into traditional educational systems to foster green digital skills. It became evident that adequate resources, effective teachers, and improved administrative systems play significant roles in the successful implementation of this approach. Conclusion: Maker education, as a tool for developing green digital skills, offers a promising alternative to traditional performance-based studies. It has the potential to lead to a future of education that is creative, innovative, and student-directed, fostering sustainability competences. Therefore, despite the challenges, with the right support and resources, the integration of maker culture into educational systems could significantly transform teaching and learning processes, advancing sustainability education.

Layered double hydroxides (LDHs) have emerged as promising catalysts for various acid-base catalytic reactions. Due to their unique structure and regulatable dual acid-base properties, they offer more environmentally friendly and sustainable alternatives to traditional liquid acid and base catalysts. This study introduces the structural composition, preparation methods, and acid-base catalytic properties of LDHs-based catalysts. Recent application progress of LDHs and rehydrated LDHs, LDHs-based metal nanocatalysts, and LDHs-based mixed metal oxide catalysts used as solid acid-base catalysts in acid-base green catalytic conversion is reviewed. The challenges and prospects of LDHs-based catalysts as green and sustainable catalysts are summarized and proposed.

As urban populations continue to grow, efficient traffic management becomes paramount in reducing congestion, enhancing air quality, and improving overall quality of life. This study addresses the critical issue of intersection efficiency through the implementation of smart green time allocation strategies at a signalized intersection equipped with two LiDAR sensors. This research aims to investigate optimal green time allocations provided by two LiDAR sensors and analyze the LiDAR results by microsimulation in AIMSUN. The research first introduces the concept of LiDAR-equipped signalized intersections and their potential to enhance traffic control precision. Two LiDAR sensors are strategically placed at the intersection of Marlboro Pike and Brooks Dr. in Coral Hills, MD, USA to capture real-time data on vehicle and pedestrian movements. The data are then processed to generate accurate and dynamic traffic profiles, ensuring the responsiveness of the green time allocation system to varying traffic conditions.The heart of this study lies in the integration of AIMSUN microsimulation with LiDAR data. Through meticulous modeling and simulation, the research explores the optimal green allocation at morning, mid-day, and afternoon peak hours’ scenarios to comprehensively assess the impact of LiDAR-enabled dynamic signal control. The findings demonstrate that smart green time allocation, informed by real-time LiDAR data and implemented through AIMSUN microsimulation, significantly enhances intersection efficiency. By adapting signal timings to real-time traffic demands, congestion, travel times, and emissions are reduced. Furthermore, this research highlighted that the optimal green time allocation in morning, mid-day, and afternoon peak hour intervals can improve the delay time by 55.3%, 59.7%, and 55.6%, respectively.In conclusion, this paper sheds light on the potential of LiDAR technology to transform intersection management. Through a case study involving two LiDAR sensors and AIMSUN microsimulation, it reveals the tangible benefits of dynamic signal control in enhancing intersection efficiency and creating more sustainable urban environments. These findings are pivotal in advancing the discourse on modern urban traffic management and promoting data-driven solutions for the challenges of today's cities.

Traffic signal control plays a key role in managing urban traffic flow, enhancing safety, and minimizing congestion and conflicts. Effective green time allocation is a critical element of this control process. This research explores the utilization of LiDAR sensor technology in the optimization of green time allocation for one phase of a traffic signal at a signalized intersection. LiDAR sensors provide precise and real-time data on vehicle presence and traffic patterns, enabling a data-driven approach to traffic signal control. The study begins with an analysis of the limitations of traditional traffic signal control strategies, which often rely on fixed-time plans or rudimentary vehicle detection systems. These approaches can lead to suboptimal green time allocation, resulting in inefficient traffic management and increased vehicle delays.The integration of LiDAR sensors provides detailed information on vehicle queues, arrival rates, and vehicle types. The research presents a practical framework for green time allocation optimization, considering factors such as intersection geometry, traffic volumes, and signal coordination. An intelligent control algorithm was developed that uses LiDAR data to determine the optimal green time for a specific phase, thereby reducing unnecessary waiting times and enhancing intersection efficiency. The effectiveness of the proposed LiDAR-based green time allocation strategy is demonstrated through extensive field tests. The results indicate significant improvements in intersection throughput, reduced delays, and enhanced traffic safety. In conclusion, this research highlights the transformative potential of LiDAR sensor technology in traffic signal control, specifically in the context of optimizing green time allocation. The findings support the notion that adaptive and data-driven strategies, when integrated with LiDAR sensors, can contribute to more efficient, sustainable, and safe urban traffic management. This research aims to provide valuable insights for transportation engineers, policymakers, and researchers seeking innovative solutions for modern urban traffic control.

Introduction The climate crisis is essentially a public health crisis. Response is imperative to prevent economic and social crises associated with the growing burden of climate impacts on human health and the health care sector. Green Podiatry Pillars By adopting the three pillars of Exercise, Evidence, and Everyday changes, podiatrists can contribute to more sustainable health and health care. Discussion Educating our patients to use their feet for low carbon active transport, eliminating interventions not supported by evidence, and reducing fossil fuel driven supply chains and energy use, are three impactful measures that all podiatrists, and indeed, all health and medical personnel, need to adopt. The avoidable suffering, enormous and costly use of resources for diabetic foot disease, is a scourge that must realise its preventable potential. It is too late, too costly, too polluting, and too sad, to continue to direct health care and research efforts and budgets, to an expensive modifiable diabetes disease process, potentiated by poor food and physical inactivity. Affected patients require skilled support, to avert such chronic disease processes, often not of their making. Conclusions Healthcare contributes 5 to 8% of green house gases (GHG), and non-communicable diseases (NCD) are increasing, so healthcare must lead on primary health. As citizens and health professionals, we must advocate for better community health, and educate our patients. Future Directions All health and medical personnel need to consider planetary health and sustainable healthcare within their daily work. Healthcare must act to address climate change, and realise benefits for people and planet.

The IPCC’s sixth assessment report projects 15% to 43% (44 EJ/y – 310 EJ/y) of global primary energy to be generated by biomass in 2050 across multiple GHG mitigation scenarios. That report also emphasises the importance of electrification to meet GHG reduction targets. With increased reliance on electric power, and increased appeal to biomass, bioenergy for electricity is expected to play a major role in future energy markets. What makes the bioenergy solution more attractive is its reported reasonable Energy Return on Investment (EROI). However, generation at large scale is projected to be greatly dependent on crops and plantations. This shifts the GHG emissions concern to be concerns over land use and other emissions integrated in the bioenergy lifecycle. It is therefore vital to know whether the potential of electricity generation from biomass outweighs environmental impact of bioenergy. This paper evaluates the potential of biomass electricity mainly generated from short rotation woody crops combustion in generating green energy. This is done using the “Green EROI (EROIg)” quantification methodology, which indicates the net energy generated to society after investing in ecosystem maintenance energy (ESME). ESME is a non-monetary weighting mechanism of an entity’s different lifecycle environmental impacts. This study found that the EROIg of bioelectricity is marginally larger than unity when converted to its primary equivalent form (EROIg-PE) which indicates that the technology is somewhat energetically viable if its production was to be green. Three design options were proposed to improve bioenergy’s EROIg performance, these include adding 20% waste wood in the combustion mix, staggered harvesting and plantation to achieve annual harvest and pelletizing wood. This approach appeared to improve the EROIg especially for pelletizing, due to its simultaneous reduction in storage and transport costs, making the production energetically and environmentally viable even at a 1 : 1 secondary : primary ratio with an EROIg of 1.11 and an EROIg-PE of 3.17. We conclude with the discussion of the multiple indirect advantages of growing crops that can be used for energy generation, and a discussion on how this technique can be used alongside others to help them generate cleaner energy while facing the current global climate, biodiversity and waste issues.

The research community has shown significant interest in the aqueous synthesis of nanomaterials due to its ability to eliminate the need for complex organic solvents. This synthesis approach aligns with the principles of green chemistry, attracting considerable attention. Aqueous solution technology in fabricating nanostructures has gained recognition for its potential to create ultrasensitive, low-energy, and ultrafast optoelectronic devices. This report focuses on synthesizing lead iodide (PbI2) nanoplates using a water-based solution technique and fabricating a planar photodetector. The photodetectors with a planar type of device structure (ITO/PbI2 NPs/Au) demonstrated a remarkable photosensitivity of 3.9×103 and a photoresponsivity of 0.51 mA/W at a wavelength of 405 nm. Notably, the asymmetrical output properties of ITO/PbI2 NPs/Au detector deliver additional evidence of the effective creation of a Schottky contact. Thus, the photodetector exhibited a photoresponse even at 0 V bias, leading to the realization of self-powered photodetectors. Additionally, the device exhibited a rapid photoresponse of 0.21/0.38 s (−5 V) in the visible range. This study has expanded the horizons for the aqueous-phase synthesis of nanoplate nanostructures, enabling the large-area fabrication of high-performance photodetectors.

Understanding park events and their categorization offer pivotal insights into urban parks and their integral roles in cities. This study utilized images and event category data from the New York City Parks Events Listing database to train a Convolutional Neural Network (CNN) for image-based park event categorization. Different CNN models were tuned to complete this multi-label classification task, their performances compared. Preliminary results underscore the efficacy of deep learning in automating the event classification process, revealing the multifaceted activities within urban green spaces. The CNN showcased proficiency in discerning various event nuances, emphasizing the diverse recreational and cultural offerings of urban parks. Such categorization has potential applications in urban planning, aiding decision-making processes related to resource distribution, event coordination, and infrastructure enhancements tailored to specific park activities.

Coastal areas are influenced by natural coastal hazards such as hurricanes, storm surges and tsunamis. For centuries coastal structures such as seawalls, detached breakwaters, groins, and revetments have been constructed to protect coastal properties. However, their effectiveness diminishes with time, and they are not adaptable to changing coastal conditions. Ecosystem-based approaches offer protection against erosion and the creation or restoration of coastal habitats. However, the protection properties and the sustainability provided by these systems are not well understood. Salt marshes have been known as one of the ecosystem-based protection systems. They protect coasts and lands by dissipating energy, stabilizing sediments and producing organic matter through blow ground production. Stems of plants dissipate waves propagating over salt marsh and plant roots stabilize soils and sediments. The dissipation rate varies with wave frequency; the low-frequency swell wave is dissipated less on the edge of the marsh than wind-sea waves. Salt and wetlands can also be used for reducing coastal flooding and storm surges, but a wetland is required to successfully attenuate storm surges. A salt marsh can be resilient to sea-level rise in certain conditions. Large sediment supply and gentle upland slope increase salt marsh resiliency to relative sea-level rise. Connecticut marshes, like other marshes in the world, are vulnerable to anthropogenic and climate change effects. However, an assessment of current sea level rise and average marsh accretion rates in Connecticut demonstrates sea level rise is not the main vulnerable factor for salt marshes loss. The study on the feasibility of developing an ecosystem based on two coastlines in Connecticut, Guilford and Stratford, shows that both coastlines, like other coastlines in Connecticut, have limited wave energy, which is a positive factor for marsh growth. The available data assessment represents that sediment supply is the most important parameter to guarantee the resilience and sustainability of a newly developed salt marsh system in Connecticut. In Stratford, conditions for establishing a new ecosystem seem to be better, as the fetch length is pretty small, and there is some sediment supply for the ecosystem. In Guilford, wave energy is limited, but it is more than in Stratford case. In addition, sediment availability is low and the coastline experienced a large erosion during Hurricane Sandy and has not recovered yet.

The concept of "Eco-authoritarianism", although appeared in the 1970s, through the writings of Robert Heilbroner, William Ophuls etc., but Eco-authoritarianism as a theory has emerged very recently [1]. In this era of global environmental degradation and rampant defacement of green space in the rapidly expanding cities of developing countries especially in India, historical sites of green belts, or eco-space developed by royal dynasties or colonial rulers are still preserved by eco-authoritarianism and cultural praxis. A lot of such heritage sites and built-up eco-spaces have faded out over time but at the same time, huge numbers are still present due to the imposition of restrictions by the state or national government or statutory organizations. Built up eco-space under Burdwan Raj Dynasty during the 18th and 19th centuries is still preserved almost in its original form due to the eco-authoritarianism outlook of the present stakeholder (The University authority mainly and the Forest Department). People of this urban unit not only feel proud of such built up eco-space; they also give credit to the university authority for maintaining the legacy of the Raj Dynasty. This investigation attempts to capture not only the role of authoritarian legacy for the preservation and conservation of eco-space in the urban context but also clarify the benefits of this eco-space regarding the cultural ecosystem services and outlook of urbanites towards nature. To portray this, both the qualitative and quantitative methods have been applied to glean the whole perspective.

The widely conserved RACK1 protein is a WD-40 type scaffold protein that regulates diverse environmental stress signal transduction pathways. Arabidopsis RACK1A has been reported to interact with various proteins in salt stress and Light-Harvesting Complex (LHC) pathways. However, the mechanism of how RACK1 contributes to the photosystem and chlorophyll metabolism in stress conditions remains elusive. Using T-DNA-mediated activation tagging transgenic rice (Oryza sativa L.) lines, we show that leaves from rice RACK1B gene (OsRACK1B) gain-of-function (RACK1B-OX) plants exhibit the stay-green phenotype under salinity stress. In contrast, leaves from down-regulated OsRACK1B (RACK1B-UX) plants display an accelerated yellowing. qRT-PCR analysis revealed that several genes encoding chlorophyll catabolic enzymes (CCEs) are differentially expressed in both RACK1B-OX and RACK1B-UX rice plants. In addition to CCEs, STAY-GREEN (SGR) is a key component that forms the SGR-CCE complex in senescing chloroplasts, which causes LHCII complex instability. Transcript and protein profiling revealed a significant upregulation of OsSGR in RACK1B-UX plants than that in RACK1B-OX rice plants during salt treatment. The results imply that senescence-associated transcription factors (TFs) are altered in accordance with altered OsRACK1B expression, indicating a transcriptional reprogramming by OsRACK1B and a novel regulatory mechanism involving the OsRACK1B-OsSGR-TFs complex. Our findings suggest that ectopic expression of OsRACK1B negatively regulates chlorophyll degradation, leads to the steady level of LHC-II isoform Lhcb1, an essential prerequisite for the state transition of photosynthesis for adaptation, and delays salinity-induced senescence. Taken together, these results provide important insights into the molecular mechanisms of salinity-induced senescence, which can be useful in circumventing the effect of salt on photosynthesis and in reducing the yield penalty of important cereal crops, like rice, in global climate change conditions.

Increasing green total factor productivity is the key to achieving green development in agriculture. This study measured the green total factor productivity of Jiangxi’s agriculture, and its regional and temporal evolution characteristics were examined. The fixed-effects model was then used to investigate the model’s fundamental components empirically. The study’s findings reveal the following: During the period under review, technical change was the primary element driving the rise in the green total factor productivity of agriculture. A rising “U”-shaped trend with notable regional variances characterizes the spatial and temporal evolution. The primary factors that affect changes in green total factor productivity in agriculture include the ease of transportation, the per capita disposable income of rural residents, the level of agricultural mechanization, the degree of urbanization, the level of financial support for agriculture, and the percentage of workers in secondary industries. As a result, it is suggested that, in order to substantially increase agricultural green total factor productivity, agricultural green technological support should be strengthened, more fully developed, and promoted in a multi-pronged approach.

Accumulating reports have suggested that an inability to clear dead cells is a cause of inflammation and cancer and that the fascia is associated with cancer metastasis. Novel corpuscle-connected filiform structures (CCFSs) entangled on the fascia of the internal organs of rats were selectively visualized with high repeatability (93%) under vital staining with Janus Green B (JGB). Serial sections of CCFSs stained with haematoxylin and eosin and with Mattson Trichrome were microscopically examined. In parallel, the immunohistochemistry with CD31, Lyve 1, scanning electron microscopy, and transmission electron microscopy (TEM) were also used to investigate the novel properties of the CCFSs. All of the CCFSs enclosed JGB-stained granules, which was verified by the impromptu coupling of stereo and light microscopes and fluorescence-activated cell sorting. The functions of the CCFSs were discovered under fluorescence microscopy and confocal laser scanning microscopy to be implicated in cell death: fragmented DNAs and f-actins with extracellular DNAs. The dead cells in the CCFSs were verified by using terminal deoxynucleotidyl transferase dUTP nick end labelling and TEM. Moreover, the CCFS had a relatively-high concentration of calcium, a main element for cell death in tissue, which was measured in 2-dimensionally images using time-of-flight secondary ion mass spectrometry. Taken these results, we report for the first time that novel reticular CCFSs are widely entangled on the fascia of the internal organs of rats with the implication for cell death.

Rajshahi, blessed by the geographical advantage provided by the river Padma, is a beautiful and one of the cleanest cities in Bangladesh. It presents a spectacular image and stunning sight to its residents. But Rapid urbanization created immense pressure on the infrastructures and cityscape by rescinding most of the natural assets and scenic beauty it possessed historically. The growing pressure of population influx accompanied by unplanned urbanization threatens the survival of its waterbodies, wetlands, and greeneries, which many other contemporary cities strive to achieve with hard-hearted planning measures. Moreover, the city suffers from inadequate provision of quality outdoor recreational facilities. Yet because of the verdant resources, it still can set an example of becoming green and fluid landscape. There are scopes to connect the city people to the urban landscape and blue-green infrastructures by applying proper planning and urban design techniques. For example, it can explore the potential and scope of a water-based transportation system to create outdoor recreation space for city dwellers as well as a transport mode in the city. This SECTION discusses the prospects and potential of enhancing recreational aspects of Circular Inland Waterways. It also analyzes the benefits of a network of waterways well-connected and integrated with the existing conventional transportation system to reduce pressure on land transport and promote a sustainable system. This research was conducted in two phases each involving a distinct approach. The first one was a macroscopic approach to probe the potential of the water transport system in Rajshahi city. The required data on traffic volume, traffic growth rate, roads and existing waterbodies were collected, and GIS and Remote Sensing tools were used to find the scope of waterway transport around Rajshahi City. In the second approach, a detailed design was proposed for a potential circular waterway network in the city. Results indicate that there is a huge prospect for introducing a circular waterway transport system around Rajshahi city to create a place of fluid landscape and minimize the pressure on the existing land transportation system.

The main intention of the present work was to investigate the ability of cellulose-degrading enzymes (C-DE) to release fatty acids (FAs) from complex matrices of cereal by-products during enzymatic hydrolysis (EH). For this purpose, three types of cereal bran (CB), i.e., wheat, rye, and oat were used as a lignocellulose substrate for three commercially available hydrolytic enzymes, i.e., Viscozyme L, Viscoferm, and Celluclast 1.5 L. The yield and composition of FAs after EH was assessed and confronted with the yield obtained after either conventional Soxhlet extraction or alkaline-assisted hydrolysis (A-AH) with 10% KOH in 80% MeOH and subsequent liquid-liquid extraction. The experimental results demonstrated that up to 6.3% and 43.7% higher total FAs yield can be achieved within EH of rye bran using Celluclast 1.5 L than by A-AH and Soxhlet extraction, respectively. However, the application of Viscoferm for EH of wheat bran ensured up to 7.7% and 13.4% higher total FAs yield than A-AH and Soxhlet extraction, respectively. The concentration of essential linolenic acid (C18:3) in lipids extracted after EH of rye bran with Celluclast 1.5 L was up to 24.4% and 57.0% higher than in lipids recovered by A-AH and Soxhlet extraction, respectively. In turn, the highest content of linolenic in wheat bran lipids was observed after EH with Viscoferm and Viscozyme L, ensuring 17.0 and 13.6% higher yield than after A-AH, respectively. SEM analysis confirmed substantial degradation of CB matrix promoted by the ability of C-DE to act specifically on 1,4-β-D-glycosidic bonds in cellulose and on 1,2-α-,1,3-α-, and 1,5-α-L- arabinofuranoside and 1,4-β-D-xylosidic bonds in arabinoxylans, arabinans, and other arabinose-containing hemicelluloses. Structural alteration in cells integrity greatly contributed to the release of bound FAs and their better transfer into the extraction solvent. It has been shown that the proposed process of EH can be used for the efficient release of FAs from the CB matrix more sustainably and with a safer profile, thereby representing the further sustainable production of FAs for certain purposes.

Public green and open spaces fulfil various social, ecological, economic, and aesthetic roles, which complement each another, but can also compete with one another. COVID-19 pandemic catalysed multiple societal changes, including citizens’ perception, needs and expectations posed towards urban green spaces. This article discusses the extent to which the temporally and geographically changed patterns of experiencing these natural spaces also influenced users’ perception and behaviour as well as their appreciation of the conservation areas. The study is based upon two surveys carried out in the greater metropolitan region of Vienna, the capital city of Austria. A quantitative survey (representative online panel) among Viennese population (n=1012), as well as qualitive interviews with experts responsible for conservation areas, administrators of federal parks, along with NGOs representatives were carried out in spring and summer 2021. Our study shows the changed use of urban and suburban large green spaces and conservation areas: first, from the perspective of those responsible for the areas as well as the visitors. Both perspectives supplement one another. They highlight also changed perception of urban citizens towards green spaces during COVID-19 pandemic. An increased importance of time spent in nature (68%) and possibility to visit large green areas (67%) was reported by Viennese citizens. Also, higher recognition of green spaces located close to home was observed among 69% of the respondents. Thus, the presented study contributes to the ongoing international discussion on the transition of societal needs and its effects on urban green spaces induced by the pandemic. Presented results deliver solid arguments highlighting the need of urgent transformation towards a more sustainable, resilient and healthy urban space.

Industrial green technology innovation has become an important content in achieving high-quality economic growth and comprehensively practicing the new development concept in the new era. This paper measures the efficiency of industrial green technology innovation and regional differences based on Chinese provincial panel data from 2005 to 2018, using a combination of the super-efficient SBM model for considering undesirable outputs and the Dagum Gini coefficient method, and discusses and analyses the factors influencing of the industrial green technology innovation efficiency by constructing a spatial econometric model. The results show that: firstly, the industrial green technology innovation efficiency in China shows a relatively stable development trend, going through three stages: " stationary period", " recession period " and "growth period ". However, the efficiency gap between different regions is obvious, specifically in the eastern > central > western regions of China, and the industrial green technology efficiency innovation in the central and western regions is lower than the national average. Secondly, regional differences in the efficiency of industrial green technology innovation in China are evident but tend to narrow overall, with the main reason for the overall difference being regional differences. In terms of intra-regional variation, variation within the eastern region is relatively stable, variation within the central region is relatively low and shows an inverted 'U' shaped trend, and variation within the western region is high and shows a fluctuating downward trend. Thirdly, the firm size, government support, openness to the outside world, environmental regulations and education levels contribute to the efficiency of industrial green technology innovation. In addition, the industrial structure hinders the efficiency of industrial green technology innovation, and each influencing factor has different degrees of spatial spillover effects.

In the search for new 2D materials beyond graphene with similar exemplary properties Stanene the new graphene relative was successfully synthesized and characterized in 2016 [14]. This new material which consists of atomically thin tin (Sn) atoms arranged in a hexagonal lattice has shown great promise in gas sensing applications in its pristine, doped and functionalized forms as evidenced by the recent research outputs following its discovery. Researchers have discovered that with its exotic properties it is highly efficient in the detection of the environmentally harmful gases like SO2, NO2, CO2, NH3 and can serve as a multifunctional gas sensor. In this focused and up-to-date review we aim to group the literature on first principles studies of stanene regards to its application for gas sensing and critically examine the success/failures of its multifunctional gas sensing properties as compared to graphene. We systematically present and discusses how structural deformations, defects and doping effect the gas sensing performance. Despite the impressive progress in the field of gas sensing with stanene shown by first principles calculations, many challenges in large scale synthesis, device fabrication and commercialization need to be addressed. The current review can help understand the current status and drawbacks of stanene and identify future directions in this field.

City Marketing has a strong tradition in Berlin, with two organisations, Berlin Partner and Visit Berlin, responsible for designing and implementing relevant strategies. Sustainability has been on and off the city marketing agenda, almost exclusively in its environmental dimension. In this article we examine the current representations of Berlin as a “sustainable city” in the official City Marketing strategies. We look at how sustainability is used and instrumentalized to create a specific city profile, and also to attract particular target groups in tourism. We propose an analysis of sustainable planning in Berlin since reunification, to show how it has moved into different directions over time and how this has (or has not) been followed by City Marketing. In this endeavour we move between the existing, and as we argue deeper and more sophisticated, environmental planning of the city on the one hand, and the reductions and simplifications of City Marketing representations on the other. Finally, we argue that there are inherent contradictions in marketing a sustainable city, where both in terms of tourism and economic development, the concept of growth seems to be reaching environmental limits.

Research shows that stress, a common problem in dense cities, can be relieved in the natural environment. As great significance has been attached to the urban environment and public health in the society, this paper aims to study the relation and interaction between the perceived sensory dimension of urban park green space, attention restoration and state empathy. Therefore, we conducted an on-site questionnaire survey in four typical parks in Chengdu in terms of age, sex, daily stress, frequency of access in parks and other basic information of the respondents. The main part consists of perceived dimension, state empathy and attention restoration. The software SPSS24.0 is applied to the test of the validity and reliability of the PSD Scale, and then the important correlation between the perceived sensory dimensions in the parks and visitors' attention restoration is analyzed through multiple linear regression. Finally, the moderation effect of state empathy is tested by PROCESS. The findings show that (1) only seven dimensions in the PSD Scale are effective; (2) Serene and Refuge in the perceived sensory dimensions have significant effect on the restorative components of attention. (3) Except the dimensions of Rich in Species and Refuge, empathy enhanced the moderation effect in the interaction between the other five dimensions the Perceived Restorative Scale(PRS), especially in the interaction between the dimension Social and PRS. However, this study needs to be further explored to provide scientific basis and design strategy guidance for the research on the restoration potential of urban park green space in high-density urban areas.

The European Union green deal has proposed the “organic farming action plan” to render this farming system more sustainable for climate mitigation and adaptation and to meet the United Nations Sustainable Development Goals (UN-SDGs). While this policy instrument is fundamental to reach sustainable agriculture, there is still no agreement on what sustainable agriculture is and how to measure it. This opinion paper proposes an ecosystem-based framework on the crop life-cycle to determine the balance between economic, social and environmental pillars of sustainability to support decision-making.

Research on urban heat mitigation has been growing in recent years with many of the studies focusing on green infrastructure (GI) as a strategy to mitigate the adverse effects of Urban Heat Island (UHI). This paper aims at presenting a review of the range of findings from GI research for urban heat mitigation through a review of scientific articles published during the years 2009-2019. This research includes a review of the different types of GI and its contribution for urban heat mitigation and human thermal comfort. In addition to analyzing different mitigation strategies, numerical simulation tools that are commonly used are also reviewed. It is seen that ENVI-met is one of the modelling tools that is considered as a reliable tool to simulate different mitigation strategies and hence has been widely used in the recent past. Considering its popularity in urban microclimate studies, this article also provides a review of ENVI-met simulation results that were reported in the reviewed papers. It was observed that the majority of the research was conducted on a limited spatial scale and focused on temperature and human thermal comfort.

Green Stormwater Infrastructure (GSI), a sustainable engineering design approach for managing urban stormwater runoff, has long been recommended as an alternative to conventional conveyance-based stormwater management strategies to mitigate the adverse impact of sprawling urbanization. Hydrological and hydraulic simulations of small-scale GSI measures in densely urbanized micro watersheds require high-resolution spatial databases of urban land use, stormwater structures, and topography. This study presents a highly resolved Storm Water Management Model developed under considerable spatial data constraints. It evaluates the cumulative effect of the implementation of dispersed, retrofitted, small-scale GSI measures in a heavily urbanized micro watershed of Costa Rica. Our methodology includes a high-resolution digital elevation model based on Google Earth information, whose accuracy was sufficient to determine flow patterns and slopes, as well as to approximate the subsurface stormwater structures. The model produced satisfactory results in event-based calibration and validation, which ensured the reliability of the data collection procedure. Simulating the implementation of GSI shows that dispersed, retrofitted, small-scale measures could significantly reduce impermeable surface runoff (peak runoff reduction up to 40%) during frequent, less intense storm events and delay peak surface runoff 5-10 minutes. The presented approach can benefit stormwater practitioners and modelers conducting small scale hydrological simulation under spatial data constraint.

The severity of the ongoing COVID-19 outbreak demand from countries to adopt extreme measurements of social isolation to stop the spread and flatten the curve of contamination. Although social isolation measures may have negative impacts on economy, historically it has been showed to be more effective in saving lives and less damaging to economy than not adopting these measurements during a viral pandemic. In Brazil, despite the positioning of the president against social isolation due to the consequent economic recession, the rapid spread of the virus has worried the governors of the Brazilian states, which are thus managing stringent social isolation measurements to avoid the advance of the virus. Since one of the main strategies to guarantee progress and economic growth in Brazil has been the exploitation of natural resources from the Amazonia biome, here we discuss the importance of this biome to Brazilian economy during the post-pandemic recession and highlights potential strategies to burst the economy without promoting Amazonia destruction. We show that, together with the REDD+ and the Amazon Fund, the Forest bonds represents good strategies to burst Brazilian economy in a sustainable way, showing that it is possible to improve the commodities without increasing Amazonia deforestation or the greenhouse gases emissions. Amazonia is a biome of global importance for the avoidance of another global crisis, which will occur if we reach the climatic tipping point of 1.5°C. Thus, governmental actions should go towards its preservation, not exploitation and depletion. The commitment of the government with environmental conservation is paramount so that these economic strategies have positive results, especially in a post-pandemic scenario, where the economy will be extremely weakened. The COVID-19 brings us a lesson regarding how our attitudes can impact the world, and what we can expect from a global crisis. Perhaps we can apply these lessons and focus on change our economy towards a sustainable direction to avoid another global crisis in the years to come.

Green public space immensely provides ecological soundness (ES), social resilience, social inclusiveness, mental health, self-esteem, and cultural prosperity from privileged class to lower ones. This research aims at estimating the effect of social services, safety, and infrastructural amenity in green space (parks) on mental health building self-esteem for elderly population. Data were collected from four parks out of 21 in Dhaka selected by systematic random sampling. Two-hundred and three elderly participants were picked up for survey using snowball sampling. The survey was conducted in a pre-structured questionnaire consisted of 40 close-ended questions. Data was analyzed applying ordinal logistic model, multivariate regression analysis, and Partial Least Square (PLS) -Path Modeling. The study explored several key findings-1) Infrastructural amenities impacted social services of parks; 2) Social services contributed positively to mental health boosting up self-esteem for elderly population. 3) Likewise, mental health for elderly population was affected by safety measure of green space. Dhaka requires constructing age-friendly parks to promote elderly mental health.

The enantioselective alpha-amination of 1,3-dicarbonyl compounds has been performed using a catalytic system based on deep eutectic solvents (DES) and chiral 2-amino benzimidazole-derived organocatalysts. This procedure avoids the use of toxic volatile organic compounds (VOCs) as a reaction medium, providing access to highly functionalized chiral molecules, which are important intermediates for the natural product synthesis, in a selective and efficient manner. Furthermore, the reaction can be performed on a large scale and recycling the catalytic system is possible for at least five times, leading to a clean, cheap, simple, and scalable procedure that meets most of the criteria required to be a green and sustainable process.

Green spaces in residential community is important, yet understudied, feature as an urban ecological system. While large urban parks and remnant wildlands in urban areas tend to receive a public attention from conservation and management perspectives, less is known for the importance of spatial and ecological characteristics of the community-scale landscapes. This study investigates natural elements in four planned communities in Phoenix metropolitan area, Arizona, two of which represent conventional type of neighborhood and the other two exemplify the community development with a proclaimed vision of sustainability. These distinct type of communities, which capture variations in age, location, open space type, and a cross-section of housing density, are compared with regard to landscape connectivity as a means of gauging ecological condition for community sustainability. Using Geographical Information System and landscape connectivity indices, each community’s landscape features including size, physical connectedness and ecological potential were examined. Furthermore, a questionnaire survey was performed to examine the perceptional differences between the two types of community residents. The findings demonstrate that the green spaces in conventional communities are more physically connected than the counterparts, but the naturalness and ecological quality manifested by the amount of the land that may serve as potential urban desert habitats were higher in the sustainable communities. The results of the survey indicated that the respondents inhabiting in sustainable communities possess a higher level of satisfaction than the people in conventional type of community due mainly to the amount of, easy access to, and perceived ecological values of, green spaces in their neighborhoods and surrounding areas. The study concludes that careful community design with ecological consideration can help create sustainable communities which can benefit both site-scale ecosystems and perceived human well-being.

To date the role of green leaf volatiles has been mainly constrained to their role in protecting plants against pests and pathogens. However, increasing evidence suggests that among the stresses that can significantly harms plants, GLV can also provide significant protection against an array of those including heat, cold, drought, light, and salinity. But while the molecular basis for this protection is still largely unknown, it seems obvious that a common theme in the way GLV work is that most if not all of these stresses are associated with physical damage to the plants, which in turn is the major event responsible for the production of GLV. Here, I summarize the current state of knowledge on GLV and abiotic stresses and provide a model that explains the multifunctionality of these compounds.

Teaching, learning, research, and development are all supported in a favorable atmosphere at the University of Lagos (UNILAG). The wetland systems made up of freshwater that are extremely biodiverse makeup about 10% of the total land area. Flooding, deforestation, excessive sedimentation, blockages to streams, abuse, overuse, and invasion of wetlands are some of the recent environmental challenges that the university faced. Urban heat island impacts, contaminants in the air, wetland degradation, social issues including stress, and a detachment from nature are all major concerns. With the green corridor behind the faculties of law and management science serving as a model supported by sustainability as a true foundation for UNILAG's campus landscapes, this article investigates the sustainable restoration of wetlands within the boundaries of the university. The use of qualitative techniques was employed, utilizing the Strengths-Weaknesses-Opportunities-Threats (SWOT) analysis. Additionally, a geospatial mapping of the wetlands and tributaries that connect the Lagos Lagoon was conducted to evaluate the intrinsic ecological goods and services through a series of analytical steps, beginning with an analysis of the land area, current biodiversity, hydrology, and its potential through landscape mapping and analysis. The biophysical setup, landscape features, climatic data analysis, the ecological goods and services derived from the wetlands, and the records of flooding and rainfall are all included in the geospatial evaluation and analysis. The educational institution's site planning for the remediation of its wetlands takes into account the actual evolution of the area's drainage network. Throughout the wetlands, low carbon emissions are generated by off-road bike lanes, trails for walking, and raised hardwood platforms. Combining native plant species and park furniture, the academic landscape atmosphere will be improved in each of the wetlands and aesthetic values. the country's "University of First Choice" and its biophysically restored wetlands will help illuminate the landscape while the green corridors have an innate ability to attract human affinity within the academic community. All of these elements are implemented following an environmentally friendly landscape planning, management, design model, and enforcement process.

This paper investigates the theoretical foundation for developing renewable geothermal resources locally. For this reason, we pay attention to the role of communities in geothermal development. This study presents arguments for a framework that approaches the geothermal resources as an endogenous factor of community development. To analyse it, we create a model that explains the local economic characters of the geothermal exploitation beyond its geological conditions. It aims to conceptualise a community based geothermal development standard referring to the endogeneity principle. Geothermal energy is given attention since the characteristics of this resource determine its use locally. We argue that the role of communities in geothermal exploitation is pivotal in the process of green growth for further expansion of geothermal energy use.

This study provides a comprehensive investigation of lactic acid bacteria (LAB) isolated from Argentinean Capsicum annum L. The research covers important aspects, including genotypic characterization, bacterial stress tolerance, adhesion ability, safety evaluation, and functional and technological properties. The predominant isolates were identified as Lactilactobacillus curvatus and Lactiplantibacillus plantarum. Rep-PCR analysis grouped the isolates into 11 clonal groups. Lp. plantarum LVP 40 and LV 46; Levilactobacillus brevis LVP 41, Pediococcus pentosaseus LV P43, and Lt. curvatus LVP44, displayed both safety and resilience against adverse conditions such a slow pH, bile, and simulated gastric and intestinal juices. Moreover, the LAB strains exhibited high hydrophobicity and auto-aggregation percentages, NaCl tolerance, and substantial acidifying capacity. LAB supernatants demonstrated promising surfactant and emulsifying properties. Likewise, they differentially inhibited Staphylococcus aureus and Pseudomonas aeruginosa biofilms, showcasing their potential as antipathogenic agents. Noteworthy some strains displayed considerable co-aggregation with these pathogens, and several isolates showed an effective antimutagenic and detoxifying power, further emphasizing their multifaceted capabilities. Five pepper bacterial strains showcased probiotic properties, suggesting their potential for gut health enhancement. In summary, these LAB strains hold promise as vegetable fermentation starters, contributing to food safety and versatile applications in food science.

Abstract: This study investigates the transition to sustainable shipping industry within the framework of the IMO's 2050 carbon neutrality objective, focusing on socio-technical systems analysis. The research delves into the sustainable paradigm shift towards alternative marine fuels such as LNG, methanol, ammonia, and hydrogen from a socio-technical transition perspective, analyzing the multi-level per-spective challenges and opportunities. Specifically, it scrutinizes the implications of adopting these al-ternative fuels for global shipping, identifying technical uncertainties, financial constraints, and infra-structure needs. Through a comprehensive review of existing literature on ship emissions and alterna-tive fuels, coupled with socio-technical transition theory, the study addresses the multifaceted chal-lenges and opportunities in meeting the IMO's environmental objectives. It emphasizes the necessity of collaborative governance, innovative niche strategies, and a holistic approach to leverage the current window of opportunity in facilitating the maritime industry's transition to sustainable fuel options. Fi-nally, this research enhances our understanding of the intricate interplay between technological, social, industrial, and cultural dynamics in the greening of shipping and offers insights into the strategic adop-tion of environmentally friendly marine fuels for a sustainable future.

As the cost of conventional energy continues to rise, and concerns over the environment grow, there is a growing interest in sustainable energy. It is believed that conventional energy will only last for around 50 years, making it essential to find a renewable energy source that is safe and feasible to replace fossil fuels. Solar energy is a superior alternative to conventional energy, as it is renewable and produces green energy that can be used directly. The maritime industry has found itself at the forefront of an evolving environmental consciousness, driven by the imperative to mitigate the carbon footprint left in the wake of ships. In this journey towards sustainability, solar energy has emerged as a beacon of hope, harnessing the boundless energy of the sun to wean vessels off their dependence on fossil fuels. Technological advancements have made solar power more accessible, and we can now see the use of solar panels on large ships and small crafts to reduce fuel usage and emissions. Solar panels are also increasingly used to power homes and businesses, and many countries are implementing policies to encourage their use. Solar energy is a key solution in reducing our dependence on non-renewable energy sources and combating climate change. However, the adoption of solar energy is but a stepping stone towards maritime sustainability, as the integration of CO2 capture, utilization, and storage (CCUS) technologies promises to amplify the industry's environmental impact to unprecedented heights.

This study investigates the impact of brand lovemark on three customer behavioral outcomes (i.e., green brand loyalty, willingness to pay a deposit, and machine use intention) in coffee shops’ CSR practices. We used a scenario-based experimental design on CSR practices in two coffee shop brands (i.e., Starbucks and Dunkin'). The study demonstrates that consumers with a high level of brand lovemark respond more positively to CSR practices of coffee shops than do customers with a low level of brand lovemark. In addition, the interactions between brand lovemark and gender appear to be important in all three behavioral outcomes. Specifically, it confirms that men and women show different levels of behavior outcomes depending on their level of brand lovemark. Theoretical and managerial implications are also suggested with the direction for future study.

Abstruct Green Human Resource Management (GHRM) has emerged as an essential strategy for achieving environmental sustainability within organizations. However, there remains a significant gap in understanding its direct impact on sustainable performance. This study seeks to address these gaps by investigating the relationship between GHRM and sustainable performance, with a focus on the mediating role of green innovation and the moderating influence of transformational leadership. A cross-sectional study was conducted among Malaysian small and medium-sized enterprises (SMEs) to explore the interrelationships between Green HRM, green process and product innovation, sustainability, and the role of sustainable leadership. The study's findings reveal a positive and significant relationship between green HRM practices and sustainability, encompassing environmental, economic, and social aspects. The findings suggest that management support for environmental initiatives is a critical factor in enhancing the effectiveness and spread of green innovations, emphasizing the importance of GHM in the broader context of organizational change and sustainability. In addition, the study underscores the critical role of transformative leadership in fostering sustainable practices, particularly the significant moderator role of responsible leadership in driving sustainable business practices. In summary, this study provides a roadmap for businesses, particularly SMEs, to leverage HGRM as a strategic tool in their pursuit of sustainability.

Green-space resources, in the context of urbanisation, cannot meet the actual needs of residents well, and the study of the balance of green-space resource allocation from the relationship between supply and demand is an urgent problem to be solved. This study quantitatively evaluates the green-space supply level from four dimensions by constructing a framework for assessment in the community life circle. It also evaluates the matching of green space supply and demand, resource distribution fairness, and distribution equilibrium under group differentiation through the supply–demand coupling matrix, Gini coefficient, and the Kruskal–Wallis H non-parametric rank-sum test, respectively. This study shows that (1) a significant spatial imbalance exists in green-space resource allocation in community life circles in different dimensions. (2) The comprehensive green-space supply level in the community life circle matched the total demand of residents to a low degree. (3) There was significant inequality in green-space resource allocation within the community life circle (the Gini coefficient of each evaluation perspective was > 0.4). Based on the study results, we were able to identify community life circles with spatial mismatches, different supply and demand, and other green-space resource allocation problems, which is of great significance to urban green-space research and planning practice under the "green justice" framework.

This paper presents the design and experimental results of a long cavity length Nd: YAG laser with large stable zone for water jet guided laser (WJGL) applications. The design is based on the light transmission matrix and resonator stability conditions, aiming to achieve a large stable zone and a short cut-off thermal focal length (CTFL). A folded concave resonator is researched to enhance the cavity length, and the influence of the tun-able cavity arm length on the oscillating beam in the resonator and in the YAG crystal is theoretically studied. Moreover, the effects of the output mirror curvature and the cavity arm length on the range of the stable area and the cut-off thermal focal length are also investigated. Experimental results show that a stable green laser output is obtained after second harmonic generation (SHG), with a pulse width ranging from 43ns to 143ns within the laser operating frequency range of 5-20kHz. At an operation frequency of 10kHz, the output power is 21.33W, and the instability of the output power within 400 minutes is 0.88%. The laser source achieves a maximum power of 25.7W at 20kHz, and the maximum single pulse energy reaches 2.7mJ at 6kHz. Finally, this is used as the laser source to couple with a water jet with a diameter of 100 microns, achieving a lossless water conductivity transmission over 60mm length with a peak power density of 0.742GW/cm2. These results demonstrate the suitability of the designed laser source for WJGL technology research.

The present study evaluated the antioxidant, antidiabetic properties, and biocompatibility of Medicago sativa and Solidago virgaurea extracts enriched in flavonoid and isoflavonoid compounds. The extracts were obtained by accelerated solvent extraction and laser irradiation. Then, nanofiltration was used for the concentration of flavonoid and isoflavonoid compounds from extracts. The extracts were analyzed for antioxidant capacity using DPPH radical scavenging and reducing power methods, while the antidiabetic property was tested by α-amylase and α-glucosidase inhibition and in vitro on a murine insulinoma cell line (β-TC-6). M. sativa obtained by laser irradiation and concentrated by nanofiltration had the highest DPPH• scavenging (IC50 = 105.2±1.1 and reducing power activities (IC50 = 40.98±0.2 µg/mL). M. sativa extracts had higher inhibition on α-amylase (IC50 = 23.9±1.2, respectively 26.8±1.1), while S. virgaurea had the highest α-glucosidase inhibition (9.3±0.9 ?g/mL respectively 8.6±0.7 ?g/mL). The results obtained after evaluating the antidiabetic in vitro activity showed that the treatment with M. sativa and S. virgaurea flavonoid- and isoflavonoid-rich extracts stimulated the insulin secretion of β-TC-6 cells, both under normal conditions as well as in hyperglycemic conditions. This paper argued that M. sativa and S. virgaurea flavonoid-rich and isoflavonoid-rich extracts could be an excellent natural source with promising antidiabetic potential.

In many ports, the ship's speed is limited for the safety of navigation. At the same time, ship captains and port pilots choose the speed of the ship, but not higher than the permitted speed of the ship in the port, therefore the speed of the ship also depends on the experience of the ship captains and port pilots and the sailing conditions of the ship in specific conditions. Choosing the optimal speed of ships in port, including the effect of shallow depth, can reduce fuel consumption and ship emissions in ports, which is important for the development of green and sustainable ports. In all cases, shipping safety is the highest priority. The main objectives of the article are determining the optimal speed of ships in ports with low clearance, ensuring navigational safety, reducing fuel consumption and emissions, and at the same time creating a sustainable port. The article presents the methodology of optimal ship speed calculation, minimum ship controllable speed maintenance, fuel consumption and emission reduction methodology and their impact on sustainable and green maritime transport and port development. The developed methodology was tested on real ships and with the help of a calibrated simulator, sailing through harbor channels and harbor waters in low clearance conditions.

This study explores the Edaravone solubility space encompassing both neat and binary dissolution media. The efforts were made toward revealing the concentration limits inherently associated with common pure and mixed solvents. For this purpose, the published solubility data of the title drug were scrupulously inspected and cured. This enabled to make the dataset consistent and coherent. However, the lack of some important types of solvents in the collection called for an extension of the available pool of Edaravone solubility data. Hence, new measurements were performed for collecting Edaravone solubility in polar non-protic and polar di-protic media. Such an extended set of data was used for tuning the parameters of regressors models and formulating the ensemble for predicting new data. In both phases, namely the model training and ensemble formulation, close attention was paid not only to minimizing the deviation of computed values from the experimental ones but also to ensuring the high predictive power and computing solubility for new systems. Furthermore, the environmental friendliness characteristics determined based on the common green solvent selection criteria was included in the analysis. Our applied protocol led to the conclusion that the solubility space defined by ordinary solvents is limited, and it is unlikely to find solvents that are more suited for Edaravone dissolution than those depicted in this manuscript. The theoretical framework presented in this study provides a precise guide for conducting experiments, saving time and resources in the pursuit of new findings.

With technological transformations such as big data, blockchain, artificial intelligence, and cloud computing, digital techniques are penetrating the field of finance. Digital finance is a resource-saving and environmentally friendly innovative financial service. It shows great green attributes and can drive the flow of financial resources towards environmentally friendly enterprises, thereby promoting green and low-carbon development. This paper investigates the effects of digital finance on green and low-carbon cyclic development and the mechanism. First, the level of green and low carbon cyclic development in China is estimated from multiple aspects based on the panel data of 31 provinces by using the spatio-temporal range entropy weight method. Then, the working mechanism of digital finance on green and low carbon cyclic development is revealed by performing empirical tests based on panel regression models, mediating effect models, and threshold models. Finally, the effects of digital finance and conventional variables on green and low-carbon cyclic development are investigated by using a random forest model and a CatBoost model in based on the machine learning. The results show that digital finance has significant positive effects on green and low-carbon cyclic development, and technological innovation plays a key role in the effects of digital finance on green and low-carbon cyclic development; meanwhile, the driving effect of digital finance on green and low carbon cyclic development shows nonlinear features with increasing “marginal effect”; besides, both digital finance and conventional factors have significant impacts on green and low carbon cyclic development. This study provides an empirical basis and path reference for digital finance to achieve “carbon peak, carbon neutralization” in China.

The global environmental impact of plastic waste is significant, with only 9% being recycled, causing pollution and harming the environment and humans. Due to increased traffic, limited funding, and dwindling natural resources, Jordan's road network is deteriorating rapidly. Pavement performance can be improved through high-quality materials and sustainable construction practices. The research investigates using Polyethylene Terephthalate as a polymer additive in asphalt mixtures to enhance their properties. Basalt and limestone mixtures were applied to asphalt mixtures. The optimal binder content for the control mixture was 4.8% for basalt and 4.93% for limestone. When modified with 10% PET, the basalt mixture showed slightly better stability than the control mix, while higher PET proportions led to reduced strength. PET-modified mixtures consistently displayed higher flows and bulk densities, with a more pronounced impact on the basalt mixture. PET increased the air-void ratio in basalt but had minimal effect on VMA. PET offers economic and environmental advantages, saving 8.4% of the original bitumen cost. As a result, limestone mixture properties, which are inferior to basalt mixture properties, improved significantly compared to basalt mixture properties. PET has the potential to create sustainable and high-performing asphalt mixtures, providing valuable insights for road construction and environmental management.

N-Acetyl-L-glutamate kinase (NAGK) catalyzes the rate-limiting step in the ornithine/arginine biosynthesis pathway in eukaryotic and bacterial oxygenic phototrophs. NAGK is the most highly conserved target of the PII signal transduction protein in Cyanobacteria and Archaeplastida (red algae and Chlorophyta). However, yet there is still much to be learnt on how NAGK is regulated in vivo. The use of unicellular green Chlamydomonas reinhardtii as a model system has already been instrumental in identifying several key regulation mechanisms that control nitrogen (N) metabolism. With a combination of molecular-genetic and biochemical approaches, we show the existence of the complex CrNAGK control at transcriptional level, which is dependent on N source and N availability. In growing cells, CrNAGK requires CrPII to properly sense the feedback inhibitor arginine. Moreover, we provided primary evidence that CrPII is only partly responsible for regulating CrNAGK activity to adapt to changing nutritional conditions. Collectively, our results suggest that in vivo CrNAGK is tuned at transcriptional and post-translational levels, and CrPII and additional as yet unknown factor(s) are integral parts of this regulation.

Microalgae are a source of carotenoids, phycocyanin, phenol, amino acids, polyunsaturated fatty acids, sulfated polysaccharides, pigments, and other bioactive molecules with antimicrobial, antioxidant, antiviral, antitumor, anti-inflammatory, and fat-burning properties. The increasing incidence of infectious processes, including tuberculosis, caused by antimicrobial resistant strains of microorganisms necessitates the search for alternative sources of compounds with antimicrobial activity, including microalgae. In this study, the antimicrobial properties of marine and freshwater microalgae extracts were evaluated against Gram-positive (Staphylococcus aureus, Enterococcus faecalis, and Streptococcus pyogenes) and Gram-negative (Klebsiella pneumoniae, Acinetobacter baumannii, and Pseudomonas aeruginosa), Mycobacterium tuberculosis strain H37Rv and Mycobacterium smegmatis. Water, dimethyl sulfoxide, and ethanol were used as extractants. The obtained microalgae extract exhibited cytotoxicity against splenocytes and, to a lesser extent, against peritoneal macrophages of CBA mice. The bacteriostatic effect of the microalgae extracts against bacteria and mycobacteria was demonstrated by MTT test. In addition, activation of bacterial and mycobacterial growth was observed in a number of cases with high levels of microalgae extracts in the medium. In an expression model of tuberculosis in mice, a decrease in mycobacterial load in the lungs and spleen was observed. Thus, microalgae have moderate to weak antimicrobial activity.

Kenya’s construction industry is experiencing exponential growth in tandem with construction trends globally. With the growth experienced in the industry, there has been significant growth in the economy and a 50% contribution to the world’s landfill waste and pollution to the adjacent environment. Globally, the construction industry is among the largest consumers of natural resources and significant contributors to pollution. This has given rise to high pressure to adopt environmentally sensitive approaches in the construction industry to present a competitive advantage. It is, therefore, crucial to address the need for sustainability measures for Landscape Architecture projects to increase knowledge and awareness, create incentives geared towards supporting sustainable practices, and leverage legal instruments and policies. Green construction practices and strategies have positively impacted the environment and the Kenyan construction industry’s social and economic performance. However, there are several barriers to the adoption and improvement of monitoring and evaluation of sustainable practices, thus slowing down the industry in taking charge of sustainability.

Biomass-derived carbon dots (CDs) are gaining much interest in recent times as it is a sustainable option with abundant availability, low cost, and tunable luminescence. Herein, we report a simple green synthesis method to produce highly fluorescent CDs from Eucalyptus globulus leaves using the one-pot hydrothermal approach. The fabricated CDs exhibit strong blue fluorescence with an excitation and emission maxima of 340 nm and 442 nm respectively. The highest quantum yield (QY) obtained was 60.7%. Due to its promising optical properties and biocompatibility, CDs can be a potential candidate for biosensing applications. Moreover, we employed a life cycle assessment (LCA) cradle-to-gate approach to study the environmental impacts of the synthesis strategy used for the fabrication of CDs. The results point out that citric acid is a main hotspot in CDs synthesis, regarding environmental impacts in most categories. This justifies the introduction of biomass, which reduces the amount of citric acid, thus leading to a more sustainable synthesis strategy for fabricating CDs.

In recent years, due to the low energy utilization of the whole life-cycle of buildings and the di-minished indoor and outdoor comfort of buildings and the impact on the surrounding environ-ment caused by the carbon emissions of the building life-cycle, the establishment of a whole life- cycle carbon emission model for buildings to improve their energy utilization at all stages of their life-cycle has received unprecedented attention. In China, the construction industry has become a major carbon emitter, and traditional houses, as a green development building type, are an effec-tive way to achieve carbon neutrality in buildings, but the existing green building evaluation system lacks quantitative indicators of carbon emissions in the building life-cycle. The exclusive evaluation indexes for regional and characteristic buildings, such as traditional houses, are ne-glected; This study explored the formula for calculating the life-cycle carbon emissions model of traditional residential houses under a carbon emission intervention and used real measurements of the physical environment and comparative analysis of the limitations of existing local stand-ards; The results showed that the carbon emission calculation formulas for each stage of the life-cycle of traditional residential houses must be established by combining the selection of local building materials, and the materials for sustainable energy and carbon sinks of green systems. Based on the results of indoor and outdoor heat and humidity environmental tests of residential houses and an analysis of the limitations of existing evaluation indexes due to locality, four im-portant factors affecting locality green buildings in terms of energy utilization, site ecology and landscape, land saving and material saving were extracted; on this basis, the whole life-cycle carbon emission model of traditional residential houses is constructed by combining the existing green building evaluation standards with the carbon emission indexes of the life-cycle of tradi-tional residential houses.

The purpose of this work was to longitudinally investigate the dynamic evolution of vaccine hesitancy towards both COVID-19 and influenza. We followed a cohort of 479 adult patients at Udine Hospital (Italy) having in common a medical history of SARS-CoV-2 infection in 2020, during the first and most impactful pandemic wave. Vaccine attitude was assessed through standardized telephone interviews performed at 12 and 18 months after the acute illness. The background of the survey was represented by COVID-19 vaccination campaign, started with the approval of the first vaccine in December 2020 and bolstered by the introduction of Green Pass in July 2021, in a context where anti-vaccination beliefs and mistrust in healthcare system were rising. The first interview reported the success of the 2020/21 seasonal influenza immunization with 46.8% (224/479) of the participants showing a positive attitude, especially the elderly and people with comorbidities (p< 0.001). The investigation conducted at 18 months showed a drastic drop in flu shot acceptance (30/166, 18.1%), the reluctance being justified by the feeling of protection regardless of prevention (55.8%) and by concerns regarding vaccines safety and efficacy (23.3%). In parallel, a great increase in vaccinations against SARS-CoV2 occurred after the introduction of Green Pass (72.9% vs 26.7%), although only a minority of the participants identified in the restrictions induced by the certification the leading incentive to get immunized (22.3%). Vaccine hesitancy remains a dynamic and complex phenomenon, which is difficult to overcome with incentive or obligatory strategies alone. The purpose of achieving vaccine compliance should always take into account the social and political context, as well as the role of personal opinions and emotions.

Based on the eventual destruction of the solar system and the critical need for human continuation, this article suggests sending synthetic biology- and AI-created plant-like astronauts to the closest habitable exoplanet, Teegarden's Star b. Here we show that these astronauts will have green skin, blue blood, and the ability to perform photosynthesis. They could withstand cosmic radiation and extremely low temperatures in space while generating energy through photosynthesis. This groundbreaking interdisciplinary approach may provide a solution to the survival challenges faced by humans on their eternal interstellar journey. As long as plant-like astronauts possess human consciousness, it does not matter whether they are even a hybrid of carbon-based and silicon-based life. They will be a continuation of humanity on exoplanets. Human faces two options for survival. The first is the Mars migration program led by Elon Reeve Musk, which remains within the solar system and may not protect against the Sun's future scorching all life on the solar system during its red giant phase. The second option involves a more daring approach: the frantic escape of plant-like astronauts from the solar system. Should we consider both options simultaneously, much like how humans use their two legs to walk?

In recent years, the demand for coffee has increased tremendously. During the production process, green coffee beans are traditionally screened manually for defective beans before they are packed into coffee bean packages; however, this method is not only time-consuming but also increases the rate of human error due to fatigue. Therefore, this paper proposed a lightweight deep convolutional neural network (LDCNN) for the quality detection system of green coffee beans, which combined depthwise separable convolution (DSC), squeeze-and-excite block (SE block), skip block, and other frameworks. To avoid the influence of low parameters of the lightweight model caused by the model training process, rectified Adam (RA), lookahead (LA), and gradient centralization (GC) were included to improve efficiency; the model was also put into the embedded system. Finally, the local interpretable model-agnostic explanations (LIME) model was employed to explain the predictions of the model. The experimental results indicated that the accuracy rate of the model could reach up to 98.38% and the F1 score could be as high as 98.24% when detecting the quality of green coffee beans. Hence, it can obtain higher accuracy, lower computing time, and lower parameters. Moreover, the interpretable model verified that the lightweight model in this work is reliable, providing the basis for screening personnel to understand the judgment through its interpretability, thereby improving the classification and prediction of the model.

The rapid growth of the organic food market in Italy and in other developed countries has drawn the attention of researchers and practitioners. The diffusion of pro-environmental concerns and sustainable lifestyles among consumers are often cited as two of the main drivers of the increase in demand for organic food products. Consequently, unveiling the factors that influence consumers’ demand of, and preference for organic food is essential for all the actors involved in the supply chain. This paper presents the results of a research model which relates organic food purchase intention to consumers’ green consciousness, health motivations, food safety concerns, organic product knowledge, family and social context and perception of the intrinsic quality of food. A questionnaire, based on the Theory of Planned Behavior (TPB) and the extant literature on organic food choice, was developed and presented to a sample of 600 Italian consumers. Causal relations among variables were then tested using Structural Equation Modelling. The results suggest that, besides the existence of green consciousness, other variables may affect consumers’ preference for organic food: among these, specific and closely interlinked elements, such as food safety concerns and perceived quality heavily affected the intention to buy organic food products.

Sharing the same raw material, recycling and composting are in direct conflict with incineration of municipal solid waste in combined heath and power plants. Indeed, waste-to-energy plants in regions with high recycling rates import urban waste from other countries to use otherwise unused capacity, and raise revenues. Using the case of Italy’s second largest and economically most developed region, I discuss the economic viability of municipal solid waste incineration to produce electricity and heath in the context of the increasing role of electricity production from renewable energy sources as well as of the emerging mass-scale uptake of bioplastics. Four lessons and three guidelines aimed to local authorities and policy makers emerge from the present study.

We do this research to investigate the relationship between renewable energy, public health expenditure, logistics performance indices, and economic and environmental sustainability in the ASEAN member states, through the analysis of a panel data from 2007 to 2017. The study used secondary data, which is downloaded from the World Bank Website and employs SEM (Structural Equation Modelling) model for testing hypothesis. The results show that the usage of renewable energy in logistical operations would enhance the environmental and economic performance in terms of mitigating carbon emissions and greenhouse gas emissions. While, public health expenditure and environmental performance is negatively correlated, which confirms that greater environmental sustainability with lower carbon emissions and greenhouse gases will improve human health and economic growth. Moreover, greater public health expenditure and poor environmental performance has negative effect on economic growth, inefficiency and low productivity of labor slowdown to the economic activities. For another side, the usage of renewable energy and the adoption of green practices in international logistics will develop the environmental sustainability, establish better image of a country and attract foreign direct investment inflows, and also minimize carbon emissions and public health expenditure, spurring sustainable economic growth with better export opportunities in pro-environmental countries.

The key anthropogenic effects on climate include the changes in land use and emission of greenhouse gases into the atmosphere. Depletion of vegetation poses serious threat that speeds the process of climate change and reduces carbon sequestration by the environment. Thus, the preservation of natural environment in urban areas is an essential component of the garden city model, proposed by Sir Ebenezer Howard in 1898, to ensure ecological balance. Recent Landsat images showed that Kumasi does not have the required percentage of green vegetation as was stipulated in the garden city model on which the city was built. It was observed that most parts of Kumasi's green vegetation have been lost to built environments. This study was conducted to assess the impact of urbanization on the garden city status and its effect on the micro-climate of the city. Significant changes in the vegetation cover of the city was evaluated from Landsat-TM imagery and analysis of a long term climatic data of Kumasi carried out over a 55-year period (1960 to 2015). It was observed that, climatic conditions have slightly changed, as mean surface temperature of has increased by 1.2 °C/ 55 years, due to the significant landuse changes from development of non-transpiring, reduced evaporative urban surfaces. However, the impact is not greatly felt due to the geographical location of the city on the globe despite the evidence of a considerable temperature change. Green vegetation conservation for the city is recommended as a top priority in future for city authorities and planners.

To develop green super rice varieties with high and stable yields under the rainfed conditions and improved nutrient use efficiency (NuUE), a modified backcross (BC) breeding approach was adopted using a high yielding and widely adaptable Xian variety, WTR1, as the recipient and a Geng variety, HAN, as the donor. Starting from the BC1F2 generation, the BC population had gone through one generation of selection under the IG, LI and RF conditions, followed by consecutive four generations of screening and selection for high GY under six different nutrient conditions, leading to the development of 230 BC1F6 introgression lines (ILs). The final evaluation of the 230 ILs under the six nutrient conditions identified many ILs with improved yields under various combinations of nutrient deficient conditions, including 12 promising lines that had significantly improved NuUE under two or more nutrient deficiency conditions. Our results demonstrated an efficient inter-subspecific BC breeding procedure with first round selection under the rainfed-drought condition followed by four generations of progeny testing for yield performances under six different nutrient conditions. The promising ILs were studied under replicated yield trials under 75N and -NPK conditions for developing high yield rice varieties with improved NuUE. Our results indicated that NuUE in rice was controlled by complex genetic and physiological mechanisms and the developed ILs provided useful materials for genetic and molecular dissection of NuUE in rice.

The construction industry is responsible for 40 to 45% of primary energy consumption in Europe alone. Therefore, it is essential to find new materials with a lower environmental impact in order to attain sustainable housing. This study aims to determine and compare the environmental impact of two clay samples forming a basis for the manufacture of traditional brick, a standard material in building construction; traditional red clay brick and a brick based on clay mixed with a biological ingredient. The samples of fired clay were manufactured at the laboratory scale, the results being valid exclusively as indicators for the extrapolation of the analysis to other studies. The results of the environmental impact of these formulations have been examined through an evaluation of life-cycle analysis (LCA), observing that the incorporation of biological pore forming agents led to a decrease of around 15 to 20% of all impact categories studied. Thus, the suitability of using biological-based additives in clay bricks was confirmed both for their constructive characteristics (lighter material) and increased energy efficiency (better thermal insulation) considering the environmental point of view.

This study inscribes itself in the global discussion on the nurturing of pro-environmental behaviors among young people for a sustainable future. Here we focus on students' interest in Ecosystem Services and Sustainability to explain their awareness and optimism about the environmental issues of air pollution, water shortage and green gas emission in 50 countries around the world. To this end, we use the cross-sectional survey data of the OECD's Program for International Student Assessment (PISA) 2015, along with seemingly unrelated bi-variate weighted ordered Probit modeling with country specific effects. The results show that in addition to factors such as age, gender, immigration status, and economic, social and cultural status, interest in the biosphere is a significant determinant of students' environmental awareness and optimism. In fact, a one level increase in students' interest in ecosystem services and sustainability raises on average their awareness level by 15.3% for the issue of air pollution, 15.7% for the issue of water shortage, and 24.6% for the issue of green gas emission. Although students' interest in the biosphere seems to not have a significant effect on their expectations about the issue of green gas emission, it does however raise their level of optimism by 0.8% for the issue of air pollution, and 0.2% for the issue of water shortage. Furthermore, every one level increase in students' environmental awareness leads to 17.3% more optimism about the issue of air pollution, 15.8% more optimism about the issue of water shortage, and 17.4% more optimism about the issue of green gas emission. Therefore, relying on the Theory of Planned Behavior (TPB), our results imply that governments and policy makers can successfully leverage young people interests in the biosphere to effectively achieve their goals for sustainability.

Is the amount of “greenness” within a 250-meter, 500-meter, 1000-meter or a 2000-meter buffer surrounding a person’s home a good predictor of their physical health? The evidence is inconclusive. We reviewed Web of Science articles that used geographic information systems buffer analyses to identify trends between physical health, greenness, and distance within which greenness is measured. Our inclusion criteria were: (1) use of buffers to estimate residential greenness; (2) statistical analyses that calculated significance of the greenness-physical health relationship; and (3) peer-reviewed articles published in English between 2007 and 2017. To capture multiple findings from a single article, we selected our unit of inquiry as the analysis, not the article. Our final sample included 260 analyses in 47 articles. All aspects of the review were in accordance with PRISMA guidelines. Analyses were independently judged as more, less, or least likely to be biased based on the inclusion of objective health measures and income/education controls. We found evidence that larger buffer sizes, up to 2,000m, better predicted physical health than smaller ones. We recommend that future analyses use nested rather than overlapping buffers to evaluate to what extent greenness not immediately around a person’s home (i.e., within 1,000-2,000m) predicts physical health.

Sustainability experienced significant global momentum in recent decades. The emergence of the sustainability movement in the Financial Sector was prompted by the increasing global climate change resulting from environmental deterioration. Primarily associated with the Financial Sector, it has increasingly been recognised that Financial Institutions are significant contributors to global climate change, both via direct and indirect means. This has resulted in a heightened emphasis and demand from stakeholders for the implementation of Sustainability Principles on a worldwide scale. This study presents a methodology that utilises the various dimensions of Sustainable Finance through the concept of Triple Bottom Line to determine the factors influencing the Sustainability Performance of Financial Institutions. The suggested approach is grounded and supported by the current body of literature. The study presents a hypothesis to investigate the correlation between factors of Green Finance Practices and Sustainability Performance of Banking Sector. The suggested framework can be utilised by regulatory bodies and individual financial institution of a country to identify the elements that influence the Sustainability Performance of Banking Sector.

Global warming, exacerbated by greenhouse gas emissions from non-green product manufacturing, necessitates a shift towards green production to safeguard ecosystems and finite resources. The United Nations Environment Programme emphasizes the importance of environmental considerations in corporate ESG criteria. Despite the higher costs of designing and manufacturing green products, which deter some companies and lead to greenwashing, efforts persist to promote sustainable goods. This study explores enhancing consumer repurchase intentions for green products through social media marketing, emphasizing green values, environmental concerns, brand image, and involvement. Findings reveal social media's role in boosting these factors, thus encouraging green repurchases. Insights are valuable for green businesses, social media groups, environmental agencies, and future research.

Synanthropic flora (weeds, spontaneously developed plants) are plants that accompany humans, appearing as a result of anthropopressure as well as after its cessation. The potential of synanthropic flora in shaping green areas usually brings many measurable benefits that depend on land management in cities. The study aimed to determine the preferences and attitudes of adults towards synanthropic flora in settlement units. The article presents survey results from 447 city residents. The obtained results were statistically analyzed using the k-means clustering method to identify segments of respondents with similar attitudes and preferences toward synanthropic flora. Mann-Whitney U tests were employed to determine statistical differences in the demographic variables among the analyzed clusters of respondents. Additionally, multiple regression analysis was performed to identify the opinions and attitudes towards synanthropic flora, that may influence their greater acceptance in the vicinity of residential areas. The results obtained in multiple regression allow for the statement that the respondent’s evaluation of the level of support for the introduction of more synanthropic vegetation into urban greenery (Yw) grows with the increase of acceptance of synanthropic plants occurrence in surroundings. Respondents’ opinions on the subject of the presence of synanthropic plants were studied using such variables concerning: synanthropic vegetation found in turfgrasses has a positive impact on the visual attractiveness of a site (X1), synanthropic plant communities present themselves better than others (X2), presence of synanthropic vegetation in an estate improves the quality of life in that location (X3), introduction of synanthropic flora into estate arrangements is a positive (X4), support for the use of synanthropic flora for educational purposes - as elements of playgrounds or in the form of environmental workshops (X5). Residents’ acceptance of synanthropic flora in green areas is at a relatively high level.

The integration of clean energy generation with wastewater treatment holds promise for addressing both environmental and energy concerns. Focusing on photocatalytic hydrogen production and wastewater treatment, the study introduces PdIn/TiO2 catalysts for the simultaneous removal of the pharmaceutical contaminant paracetamol and hydrogen production. Physicochemical characterization showed a high distribution of Pd and In on the support as well as a high interaction with it. The Pd and In deposition enhances the light absorption capability and significantly improved HER in comparison to TiO2 not only in the electrolyte but also in presence of paracetamol. Regarding PTM oxidation, TiO2 and PdIn/TiO2 showed an irreversible behavior toward the PTM oxidation, limited by the adsorption of species on the electrode surface. Thus, PdIn-doped TiO2 stands out as a promising catalyst, showcasing enhanced physicochemical properties and superior catalytic performance. This underscores its potential for both environmental remediation and sustainable hydrogen production.

Green economy has emerged as a significant pillar of sustainable development in the current global context, and the unpredictability of economic policy has progressively garnered the interest of businesses and government officials as one of the obstacles they must confront. This paper examines how uncertainty in the green economy impacts the green economy's efficacy. The research concentrates on how changes in a particular region can result in geospatial diffusion (spatial spillover), which is a form of spatial spillover wherein the uncertainty of the green economy can impact its efficacy. This paper examines the policy formulation and current state of the green economy across various regions, as well as the diffusion of economic policy uncertainty across geographical areas and the subsequent impact on the green economy's status quo. There is a negative correlation between economic policy uncertainty and green economy efficacy, according to research. There is a spatial spillover effect between economic policy uncertainty and the efficacy of the green economy. Regional variations exist in the impact of economic policy uncertainty on the efficacy of the green economy. The findings indicate that the implementation of AI has a more substantial beneficial effect on carbon emissions. An increase in carbon dioxide emissions poses a growing challenge for the industrial sector in its pursuit of carbon neutrality.

The feasibility of replacing the toxic chlorobenzene antisolvent with the environmentally friendly anisole in the fabrication of planar triple cation perovskite solar cells was explored. The successful integration of anisole not only ensures comparable device performance but also contributes to the development of more sustainable and green fabrication processes for next-generation photovoltaic technologies. Nevertheless, to ensure the possibility to achieve well-functioning unencapsulated devices, at any time of the year, with changed temperature and relative humidity, several batches with different cesium concentration were realized. We found that 10% of CsI in the precursor solution makes devices with low hysteresis index and sustained performance stability over a 90-day period both with cholorobenzene and anisole antisolvent. However the use of anisole as a green antisolvent ensures enhanced performance.

A single type I RC (Fe-S type, ferredoxin reducing) is found in several of the phyla of anoxygenic phototrophic bacteria. They include the heliobacteria (HB), the green sulfur bacteria (GSB) and the chloroacidobacteria (CAB), for which high-resolution homodimeric RC-PS structures have recently appeared [1-4]. The 2.2-Å Xray structure of the RC-PS of Heliomicrobium modesticaldum [1] revealed that the core PshA apoprotein (PshA1 and PshA2 homodimeric pair) exhibits a structurally conserved PSI arrangement comprised of five C-terminal transmembrane helices (TMHs) forming the RC domain and six N-terminal TMHs coordinating the light-harvesting (LH) pigments. The Hm. modesticaldum structure lacked quinones, indicating that electrons were transferred directly from the A0 (81-OH-chlorophyl (Chl) a) primary acceptor to the FX [4Fe4S] component, serving as the terminal RC acceptor. A pair of additional TMHs designated as Psh X were found, that function as a low-energy antennae. The 2.5Å resolution cryo-electron microscopy (cryo-EM) structure for the RC-PS of the GSB Chlorobaculum tepidum [2] included two Fenna-Matthews-Olson protein (FMO) antennae, which transfer excitations from the chlorosomes to the RC-PS (PscA1 and PscA2) core. Two cytochromes c (PscC) molecules were revealed, which act in series as electron donors to the photooxidized RC BChl a’ special pair, as well as PscB, housing the [4Fe-4S] cluster FA and FB, and the associated PscD protein [3]. Although their FMO components were missing from the 2.6-Å cyro-EM structure of the Zn-BChl a’ special pair containing RC-PS of Chloroacidobacterium thermophilum [4], a unique architecture was revealed that consisted of seven additional subunits including PscZ in place of PscD, the PscX and PscY cytochrome c serial electron donors and four low mol. wt. subunits of unknown function. Overall, these diverse structures have revealed that: (i) the HB RC-PS is the simplest light-energy transducing complex yet isolated, and represents the closest known homolog to a common homodimeric RC-PS ancestor; (ii) the symmetrically localized Ca2+binding sites found in each of the Type I homodimeric RC-PSs likely gave rise to the analogously positioned Mn4CaO5 cluster of the PSII RC and the TyrZ RC donor site; (iii) a close relationship between the GSB RC-PS and Chl protein (CP)43 and CP47 of PSII was demonstrated by the strongly conserved locations of their LH-(B)Chls; (iv) LH-BChls of the GSB-RC-PS are also localized in the conserved RC-associated positions of the PSII ChlZ-D1 and ChlZ-D2 sites; (v) glycosylated carotenoids of the GSB RC-PS are located in the homologous carotenoid-containing positions of PSII, reflecting an O2-tolerance mechanism capable of sustaining early stages in the evolution of oxygenic photosynthesis. In addition to the close relationships found between the homodimeric RC-PS and PSII, duplication of the gene encoding the ancestral Type I RC apoprotein, followed by genetic divergence my well account for the appearance of the heterodimeric Type I and Type II RC found in extant oxygenic phototrophs. Accordingly, the long-held view that PSII arose from the anoxygenic Type II RC is now supplanted by the new evidence provided by Type I RC-PS homodimer structures, indicating that the evolutionary origins of anoxygenic Type II RCs along with their distinct antenna rings are likely to have occured later than the events which gave rise to their oxygenic counterparts.

Rather high speed of modern water bikes that they develop using only human muscle power increases their popularity. For example, the maximum speed of prototypes reaches the value 3 m/s. Similar vehicles can be used not only for recreation and fitness, but also for transportation. To increase their speed and tonnage, we recommend improving the pontoon shape and using electrical power. The total drag and maximal speeds of the vehicles with the human muscle and electrical power are estimated. Expected success in improving the pontoon shape opens wide prospects for the use of these special shaped hulls in shipbuilding.

Understanding how industrial agglomeration affects agricultural green production efficiency is essential for green agricultural development. This study uses the super-efficient EBM-GML to measure and analyze the spatial and temporal evolution characteristics and core sources of dynamics of agricultural green production efficiency in China by using panel data from 30 Chinese provinces from 2006 to 2020. It also empirically investigates the relationships between industrial agglomeration, land transfer, and agricultural production efficiency. By using fixed, intermediary, and threshold effects models, the internal links between the industrial agglomeration, land transfer, and agricultural green production efficiency are examined. The findings indicate that the green production efficiency of Chinese agriculture exhibits the regional characteristics of being “high in the west and low in the east, high in the south and low in the north” in terms of space; in terms of time series, the overall trend is that of growing, with an average annual growth rate of 11.45%, and the growth primarily depends on the “single-track drive” of green technological progress. By promoting land transfer, industrial agglomeration can increase the agricultural green production efficiency and decomposition index. Land transfer has a double-threshold effect on the influence of industrial agglomeration on agricultural green production efficiency. As a result, this study suggests adhering to the idea of synergistic development, promoting agricultural green development, strengthening the development of industrial agglomerations, promoting the quality and efficiency of industry, improving land-transfer mechanisms, and placing a focus on resource efficiency improvements, as well as other policy recommendations.

Nowadays, consumers have growing expectations for healthier and higher-quality food, and sustainable food choices are also taking on an increasingly central role. This paper assesses the environmental loads and energy resources of vegan, semi-vegetarian, and traditional restaurant soups and main dishes, focusing on preparation and cooking phases based on the life cycle assessment. The optimal menu samples were selected based on statistical methods. Mann-Whitney and Krus-kal-Wallis tests were applied to investigate restaurant products' distribution and carbon footprint. Based on the results, the preparation phases have a more significant impact. The environmental loads for the life cycle of vegan and semi-vegetarian menus are lower. Furthermore, a sustainability assessment model was developed by integrating lean and life cycle assessment approaches called "GreenCycLEAN." Research results are helpful for the sustainability of catering establishments.

Quantitative polymerase chain reaction (qPCR) is the gold standard approach for detecting a variety of pathogens either via probe-based or SYBR green detection chemistry. Generally, probe-based detection is more specific than SYBR green chemistry. This report describes work done in using a FAM probe targeting a specific segment of the human KRAS gene for detecting presence and relative abundance of the gene in human gastric CloTest samples. Results indicate ineffective detection of the human KRAS gene in samples that are shown to harbor the gene through a similar qPCR assay using SYBR green detection chemistry. Such observations point to inability of the designed FAM probe to bind to target segment of the human KRAS gene that suggests a region of rapid genomic evolution that require close surveillance in the public health community. Given its rapid genomic evolution, this probe region may be an important region in the human KRAS gene playing critical functional roles in either molecular recognition or other structural functions. Overall, human KRAS gene may be undergoing rapid genomic evolution, and qPCR probes targeting specific segment of the gene may be rendered ineffective in short time clinically, thereby, making SYBR green qPCR assay a more reliable choice.

(1) Background: The 2002 Budapest Open Access Initiative recommended on self-archiving of scientific articles in open repositories as the “green road” to open access. Twenty years later, only one part of the researchers deposits their publications in open repositories; moreover, one part of the repositories’ content is not based on self-archived deposits but on mediated nonfaculty contributions. The purpose of the paper is to provide more empirical evidence on this situation and to assess the impact on the future of the green road. (2) Methods: We analyzed the contributions on the French national HAL repository from more than 1,000 laboratories affiliated to the ten most important French research universities, with a focus on 2020, representing 14,023 contributor accounts and 166,939 deposits. (3) Results: We identified seven different types of contributor accounts, including deposits from nonfaculty staff and import flows from other platforms. Mediated nonfaculty contribution accounts for at least 48% of the deposits. We also identified difference between institutions and disciplines. (4) Conclusions: Our empirical results reveal a transformation of open repositories from self-archiving and direct scientific communication towards research information management. Repositories like HAL are somewhere in the middle of the process. The paper describes data quality as the main issue and major challenge of this transformation.

The natural compounds of boron have many applications, including as dietary supplement. Communication is based on the discovery that diester chlorogenoborate complex can be detected and quantified from green coffee bean. The study reports that such diester molecule can also be synthesized in stable form by direct reaction of boric acid and chlorogenic acid, in a mixture of acetonitrile–water (1:1, v/v), left to evaporate over a period of 48 hours, at room temperature, resulting a spirocyclic form (diester complex). The diester complex, with its molecular structure and digestibility attributes has potential application as prebiotic in gut health, oral health and as micronutrient essential for microbiota to human and animals.

This paper is an extension to previous work that introduced successful classical-control for indoor lighting system that simultaneously control LED system and roller curtain to achieve accurate light intensity for indoor lighting applications. In this paper, Multi Input Multi Output Fuzzy Logic Controller (MIMO FLC) is proposed to replace the classical-controller. Detailed method is provided to illustrate the steps to design the required MIMO FLC that has two fuzzy input, two fuzzy output and forty-five fuzzy rules with mamdani fuzzy engine. The proposed MIMO FLC is simulated in Matlab using Simulink tools. The results are illustrated, analyzed and compared with the classical-control. The response showed very close performance to the classical-controller. The maximum average error and the maximum error with respect to “Desired Lux” inside the room is -6% and -10% respectively.

In the context of carbon emissions peak, environmental issues highlight the importance of the green economy, how does economic agglomeration release growth potential and enable the coordinated development of the economy and environment? There are few works of literature to analyze it within the framework of spatial economy. This paper constructs a theoretical model to clarify the influence mechanism of economic agglomeration on green total factor productivity (GTFP), and then uses a dynamic SDM model to test the theoretical hypothesis. This contribution has three main findings. First, there is a "U-shaped" curve relationship between economic agglomeration and GTFP, and the formation mechanism is that economic agglomeration has a threshold effect on the agglomeration externalities such as infrastructure sharing, knowledge spillover, and labor market upgrading. Second, the mismatch of industrial structure is an important reason that the economic agglomeration in this region has not produced an obvious spatial spillover effect on other regions; Relaxing restrictions on the concentration of economic activity to regional centers would contribute to the improvement of GTFP. Third, GTFP has the classic "snowball effect" in the time dimension, but has the obvious "warning effect" in the space and time dimension. Based on this, this paper believes that at the present stage, it is necessary to adapt to the layout of economic geography, promote the rational allocation of human resources in the territorial space, promote the coordination between economic agglomeration and the development goal of green economy, and at the same time, it is necessary to cultivate the cooperative linkage mechanism of green economy development and transformation among cities.

The concepts of accessibility and urban walkability are the cornerstones of urban policies for the contemporary city, called upon to adopt sustainable development models in line with the objectives of the 2030 Agenda and the ambitious objectives of the 'European Green Deal'. These concepts are closely linked to the paradigm of a sustainable city (livable, healthy and inclusive), founded on a system of quality public spaces and on a network of services and infrastructures, both tangible and intangible, capable of strengthening or building new relationships: social, economic and environmental. It is therefore necessary to recognize potential opportunities for connection and permeability in consolidated urban environments, very often fragmented and characterized by enclaves. Within this framework, the city of Cagliari represents an interesting case study as it is characterized by the presence of a series of military complexes, real 'enclaves' which condition the proximity connections and, more generally, the walkability. In this sense, building on previous research and analysis of policies and projects aimed at reintroducing, even partially, this military asset into civilian life (Green Barracks Project - GBP - 2019), this study proposes and applies a methodology to improve urban accessibility in a flexible network logic, where 'walkability' can become not only a moment of possible "choice" but the basis for planning oriented to the '15 min city' model or, more generally, to the renewed, inclusive, safe, resilient and sustainable “City of proximity”.

Open-plan office (OPO) layouts emerged to allow organizations to adapt to changing workplace demands. We explore the potential for OPOs to provide such adaptive capacity to respond to two contemporary issues for organizations: the chronic challenge of environmental sustainability, and the acute challenges emerging from the great COVID-19 homeworking experiment. We apply a socio-technical systems perspective and green ergonomics principles to investigate the relationship between an OPO environment and the occupants working within it. In doing so, we consider the relevant technical and human factors such as green technology and employee green behavior. We also consider how a green OPO might provide non-carbon benefits such as improving occupant wellbeing and supporting the emergence of a green organizational culture. Our investigation highlights several avenues through which an OPO designed with green ergonomic principles could benefit occupants, the organizations they work for, and the natural environment of which they are a part and on which they depend. We find reason to suspect that green OPOs could play an important role in sustainable development; and offer a research agenda to help determine whether in fact OPOs are another example of how going green is good business.

The utilization of eco-fonts for office printing is a sustainable, “green” printing concept, which has obvious economic benefits. As a result, it has a significant effect on environmental sustainability. This practice's fundamental problem is the decreased quality of text printed using eco-fonts compared to those printed with regular fonts. The aim of this research is eco-font efficiency estimation, i.e. determination of toner usage reduction level of inkjet-printed documents typed with this font type, as well as estimation of the extent humans perceive differences between text printed with eco-font and the one printed by its “non-eco“ equivalent. Combining the instrumental measuring method and digital image analysis, it was found that this simple principle (eco-font utilization) enables substantial toner usage reduction for an inkjet printing system. At the same time, a visual test showed that the visual experience of text printed using eco-font was sufficient. In addition, awareness of the benefits that eco-font utilization brings, change users’ attitude towards eco-font quality. The concept of removing the black pixel from this commonly used Thai font has a great potential for the sustainability printing process, and this simple solution could be applied to other languages as part of the GIT campaign.

The COVID-19 pandemic has brought about unprecedented changes to human lifestyles across the world. The virus and associated social restriction measures have been linked to an increase in mental health conditions. A considerable body of evidence shows that spending time in and engaging with nature can improve human health and wellbeing. Our study explores nature’s role in supporting health during the COVID-19 pandemic. We created web-based questionnaires with validated health instruments and conducted spatial analyses in a geographic information system (GIS). We collected data on people’s patterns of nature exposure, associated health and wellbeing responses, and potential socioecological drivers such as relative deprivation, access to greenspaces, and land-cover greenness. We applied a range of statistical analyses including bootstrap resampled correlations and binomial regression models, adjusting for several potential confounding factors. We found that respondents significantly changed their patterns of visiting nature as a result of the COVID-19 pandemic. People spent more time in nature and visited nature more often during the pandemic. People generally visited nature for a health and wellbeing benefit and felt that nature helped them cope during the pandemic. Greater land-cover greenness within a 250 m radius around a respondent’s postcode was important in predicting higher levels of mental wellbeing. There were significantly more food-growing allotments within 100 m and 250 m of respondents with high mental wellbeing scores. The need for a mutually-advantageous relationship between humans and the wider biotic community has never been more important. We must conserve, restore and design nature-centric environments to maintain resilient societies and planetary health.

The co-electrolysis of CO2 and H2O at intermediate temperature is a viable approach for the power-to-gas conversion that deserves for further investigation, considering the need for green energy storage. The commercial solid oxide electrolyser is a promising device, but it is still facing to solve issues concerning the high operating temperatures and the improvement of gas value. In this paper we reported the recent findings of a simple approach that we have amply suggested for solid oxide cells consisting in the addition of a functional layer coated to the fuel electrode of commercial electrochemical cells. This approach simplifies the transition to the next generation of cells manufactured with the most promising materials currently developed and improves the gas value in the outlet stream of cell. Here, the material in use as a coating layer consisted of a Ni-modified La0.6Sr0.4Fe0.8Co0.2O3 which was developed and demonstrated as promising fuel electrode for solid oxide fuel cells. The results discussed in this paper proved the positive role of Ni-modified perovskite as a coating layer for the cathode, since an improvement of about twice was obtained about the quality of gas produced.

The implementation of green roofs as sustainable urban drainage systems provides benefits for stormwater control and the environment and is always more encouraged. In this paper, the estimation of the probability of vegetation survival without irrigation has been proposed as a guide to choose the proper values for the design parameters; in particular the growing medium thickness has been related to the average return interval of the water content at the end of the dry period. Moreover the study represents an improvement of the analytical probabilistic approach since a chain of consecutive rainfall events has been considered, in order to take into account the possibility that the storage capacity is not completely available at the beginning of each event because of the pre-filling from more than one previous rainfall as typically happens for green roofs. Finally, developed equations have been validated by means of their application to two case studies, respectively in northern and southern Italy.

Due to the continuous trade friction between China and the United States, for domestic enterprises in China, the cost of importing foreign technologies is increasing. Thus, the independent research and development (R&D) becomes particularly important for the realization of green technology innovation (GTI). This paper establishes a non-linear mediating effect model based on the data of various regions in China from 2012 to 2018. The main results are shown in the following. Firstly, there is an inverted U-shaped relationship between the intensity of intellectual property protection (IPP) and the level of GTI. Furthermore, the independent R&D investment has a masking effect between them. Secondly, by taking the independent R&D investment as a threshold variable, we prove our findings. Considering that the intensity of IPP is at a high level in most regions of China, the above statements mean that the enterprises need to continuously increase their investment in R&D, in order to further improve the regional ability in GTI. Meanwhile, local governments should also stimulate enterprises' willingness to expand their scale in R&D by issuing incentive policies, such as R&D tax incentives and government subsidies.

The science on the anthropogenic airborne aerosols impacting upon the World Heritage marble monument, the Taj Mahal, at Agra has been studied in the light of modern physico-chemical approaches. The study is an effort to understand yet unrecognized airborne species which were found on the surface of the Taj Mahal monument. These species have been analyzed in the light of current analytical methods to impart characterization features and their possible impacts on the surface of the marble. Chemical constituents of these substrates which were incorporated over the top surface of the monument have been identified. Interestingly, the carbon particulates which were thought in the micro level, popularly called “particulate matters” has now been identified even in the nano domain entity, which are chemically more reactive, have been found on the surface of the monument. Because of their high chemical activity these nano carbons do play newer chemistry in the presence of air and sunlight generating several reactive oxygen species (ROS).These ROS are capable to respond to complicated chemical reactions on the surface of the marble in association with deposited cyanophyceae and other deposits of plant origin causing rapid degradation. This study provides the nature of onslaught borne out by such monument exposed under the prevalent smoggy environmental scenario.

Natural rivers in urban areas bear significant potential to provide ecosystem services for the surrounding inhabitants. However, surface sealing by houses and street networks, urban drainage, disposal of waste and wastewater resulting from advancing urbanization usually lead to the deterioration of urban rivers and their riparian areas. This ultimately damages their ability to provide ecosystem services. This paper presents an innovative methodology for a rapid and low-cost assessment of the ecological status of urban rivers and riparian areas in developing countries under data scarce conditions. The methodology uses a combination of field data and freely available high-resolution satellite images to assess three ecological status categories: river hydromorphology, water quality, and riparian land cover. The focus here is on the assessment of proxies for biophysical structures and processes representing ecological functioning that enable urban rivers and riparian areas to provide ecosystem services. These proxies represent a combination of remote sensing land cover- and field-based indicators. Finally, the three ecological status categories are combined to quantify the potential of different river sections to provide regulating ecosystem services. The development and application of the methodology is demonstrated and visualized for each 100 m section of the Pochote River in the City of León, Nicaragua. This spatially distributed information of the ecosystem service potential of individual sections of the urban river and riparian areas can serve as important information for decision making regarding the protection, future use, and city development of these areas, as well as the targeted and tailor-made development of nature-based solutions such as green infrastructure.

Supplier selection is one of the most important multi criteria decision making (MCDM) problems for decision makers in competitive market. Organizations of today’s world are seeking new ways to reduce negative effects of their organizations to the environment and to reach a greener system. At this point, green supplier selection concept has gained great importance with its ability on incorporating environmental or green criteria into the classical supplier selection practices. Therefore, in this study, it is aimed at proposing a multi-phase MCDM model based on Best-Worst Method (BWM) and interval type-2 fuzzy technique for order preference by similarity to ideal solution (TOPSIS). A case study in a plastic injection molding facility in Turkey is performed to show the applicability of the proposed integrated methodology. The paper ensures insights into the decision making, methodology, and managerial implications. Results of the case study are examined and suggestions for future research are provided.

Over the years, sustainability, impact on the environment, as well as the operation expenditure have been a major concern to the deployment of mobile cellular base stations worldwide. This is because the mobile cellular base stations are known to consume a high percentage of power within the mobile cellular network. Such energy consumption contributes to the emission of Greenhouse Gases (GHG) through the use of conventional diesel generating a set. As a result, the mobile cellular operators are faced with the dilemma of minimising the power consumption, GHG emission, and the operation cost, while improving the Quality of Service of the networks. In attempting to find a solution, this study presents the feasibility and simulation of a solar photovoltaic (PV) with battery hybrid power system (HPS) as a predominant source of power for a specific mobile cellular base station site situated in Soshanguve area of the city of Pretoria, South Africa. It also presents the technical development, showed the environmental advantage and cost benefits of using a solar PV-battery HPS to power a base station site of a 24 hrs daily load of 241.10 kWh/d and the peak load of 20.31 kW as compared to using the HPS of solar PV-diesel generating set-battery. The solar resource pattern for the city of Pretoria was collected from The National Aeronautics and Space Administration and modelled statistically. Thus, the statistical modelling done using solar radiation resource exposure characteristic patterns of Pretoria, South Africa, revealed an average annual daily solar radiation of 5.4645 Wh/m2/d and 0.605 clearness index. The simulation and the design were done using the Hybrid Optimization Model for Electric Renewables and Matlab/Simulink software. The simulation finding shows that the HPS of solar PV-battery combination has about 59.62 % saving on Net Present Cost, Levelized Cost of Energy, and 80.87% saving on Operating cost as against conventional BS powered with Gen Set-Battery.

Performance of flow through orifices on a perforated distribution pipe between periods with and without partial clogging (submersion of part of the distribution pipe) was compared. The distribution pipe directly receives runoff and delivers it to an underground infiltration bed. Partial clogging appeared in winter but reduced in summer. Performance was defined as flow rate divided by l_eff (h_(d,mean)^0.5) where h_(d,mean) is the mean pressure head that drives flow and l_eff is the effective pipe length (length of water column with pipe water volume and the pipe cross-sectional area). ANCOVA (ANalysis of COVAriance) was adopted to examine the clogging effects with flow rate plotted against l_eff (h_(d,mean)^0.5) . Partial clogging had a significant effect on pipe performance during periods of low or no rainfall. However, if only data during larger storms was considered, little evidence showed that partial clogging had effects on pipe delivery performance. Partial clogging might be caused by leaves accumulated in the lower section of the pipe in winter, and its effect was insignificant when water level rose in the pipe, utilizing significantly more orifices on the distribution pipe, thus the effect from the clogged portion had negligible impact on system performance. Larger storms might also provide the required flow rate to move the debris block thus exposing the orifices. Partial clogging did not increase the tendency of overflow; therefore, current maintenance schedule was sufficient to keep the distribution pipe at satisfactory performance even though partial clogging can exist.

Tributyltin (TBT) is one of the most toxic anthropogenic compounds introduced into the marine environment. Despite its global ban in 2008, TBT is still a problem of great concern due to its high affinity for particulate matter, providing a direct and potentially persistent route of entry into benthic sediments. Bioremediation strategies may constitute an alternative approach to conventional physicochemical methods, benefiting from the microorganism’s potential to metabolize anthropogenic compounds. In this work, a simple, precise and accurate static headspace gas chromatography method was developed to investigate the ability of TBT degrading microbes in sedimentary microcosms over a period of 120 days. The proposed method was validated for linearity, repeatability, accuracy, specificity, limit of detection and limit of quantification. The method was subsequently successfully applied for the detection and quantification of TBT and degrading compounds in sediment samples on day 0, 30, 60, 90 and 120 of the experiment employing the principles of green chemistry. On day 120 the concentration of TBT remaining in the microcosms ranged between 91.91 ng/g wet wt for the least effective microbial inoculant to 52.73 ng/g wet wt for the most effective microbial inoculant from a stating concentration of 100 ng/g wet wt.

The implementation of green logistics can reduce the increasingly serious environmental damage and improve the operating efficiency of logistics enterprises. In this paper, through quantitative calculation of logistics negative external costs, including traffic accidents, atmospheric pollution, noise pollution, and pollution caused by packaging, we build accounting standards to calculate the negative external cost of logistics enterprises that mainly generate pollution from transportation and packaging. Then, assuming the impetus provided by government implementing incentive mechanisms in a free market economy, we establish a ‘Logistics Negative External Cost Internalizing’ model, which quantitatively analyzes the relationships among freight rate, freight volume, investment of enterprise for implementing green logistics, and the subsidy given by government, under the comparison of the two modes ‘enterprise operates first’ and ‘government subsidizes first’. The results show that the introduction of ‘government subsidizes first’ incentive mechanism and increasing freight rate are helpful in promoting the process of logistics market greening.

Water is a fundamental resource for ecosystems, humans, and the development of all economic sectors; it is necessary to identify and evaluate its environmental pressures or impacts. The water footprint (WF) is an appropriate indicator for the consumption of water used to produce a product. The present study uses this tool to evaluate the green and blue water requirements and the sustainability of irrigation water use for agroindustrial avocado production in Ziracuaretiro, Michoacán (2012-2021). Our analysis was based on aggregating weather and soil data at the municipal level and official government databases of avocado cultivated surface, fruit production, and water rights concessions. The analysis considers the homogeneity of information throughout the study area. We estimated that rainfed plantations require 839.03 m³/ton and irrigated plantations require 2355.80 m³/ton, with an average of 1597.47 m³/ton. In addition, we determined that avocado cultivation can demand up to 124.3% of agricultural water concessions in this municipality. In addition to the WF estimates, the analysis indicates that such studies are fundamental for decision-makers to develop and implement water use-efficiency strategies and shows the need for further research related to water consumption of avocado as a crop at more detailed scales to reduce uncertainty.

To mitigate the adverse impacts of urban stormwater on streams, watershed managers are increasingly using low impact development and green infrastructure (LID-GI) stormwater control measures such as rain gardens—vegetated depressional areas that collect and infiltrate runoff from rooftops and driveways. Their catchment-scale performance, however, can vary widely, and few studies have investigated the cumulative performance of residential rain gardens for event runoff control in intermediate-sized (i.e., 1-10 km2) suburban catchments. We modeled three years of continuous rainfall-runoff from a 3.1 km2 catchment in Columbia, MD, USA, using the Storm Water Management Model (SWMM). Various extents of rain garden implementation at residential houses were simulated (i.e., 25%, 50%, 75%, and 100% coverage) to determine the effects on peak flow, runoff volume, and lag time. On average, treating 100% of residential rooftops in the catchment reduced peak flows by 14.3%, reduced runoff volumes by 11.4%, and increased lag times by 3.2% for the 223 rainfall events during the simulation period. Peak flow reductions were greater for smaller storm events (p<0.01). Our results show that residential rain gardens can significantly improve the runoff response of suburban catchments, and that they represent an effective and relatively low-cost option for urban watershed management and restoration.

Supramolecular solvent (SUPRAS) has received increasing interest as an innovative, efficient, and green solvent for the effective extraction and separation of bioactive compounds from natural resources. However, studies on the use of SUPRAS for the extraction of phenolic components from plants, which are highly valued in food products due to their excellent antioxidant capacity, are still lacking. The present study developed a green ultrasound-assisted and efficient SU-PRAS method to simultaneously determine three phenolic acids in Prunella vulgaris by high-performance liquid chromatography (HPLC) and the experimental parameters were optimized in detail. The efficiency and antioxidant properties of the phenolic compounds obtained by different extraction methods were also compared. Under the optimal conditions, the extraction efficiency of SUPRAS, prepared with octanoic acid reverse micelles dispersed in ethanol-water, was substantially higher than conventional organic reagents. Moreover, this SUPRAS method also showed more significant antioxidant capacities. The confocal laser scanning microscopy (CLSM) images presented the spherical droplet structure of SUPRAS (A well-defined circle), which coincided with the position of the fluorescence position of phenolic acids. The phenolic acids were encapsulated in the vesicles by the SUPRAS droplets, which indicated the efficient extraction capacities of SUPRAS for the target compounds. Finally, combined with the CLSM method, the mechanism of the proposed method was further clarified, and the superior extraction performance of SUPRAS was theoretically demonstrated through molecular dynamics simulations. In comparison with conventional methods, the higher extraction efficiency of SUPRAS can be illustrated by the larger solvent contact surface area, more types of hydrogen bonds between extractants and supramolecular solvents, and stronger and more stable interaction forces. The results of the theoretical studies are in rational agreement with the experimental outcome.

Key elements of Blue-Green Infrastructure are vegetation and stormwater storage. A combination of a bioretention cell with an underlying trench (BC-T) serving as a tree pit is often used in dense urban environments. An adequate ratio of drained area to bioretention cell area is a crucial design parameter. The ratio is derived from the hydrological balance; however, input data are often difficult to obtain or uncertain. The goal is to study the sensitivity of such data (tree water uptake and water holding capacities of soil filter and trench substrate) in the BC-T design. Sensitivity analysis is performed for the setup of a BC-T used in Prague, Czech Republic. A 10-year rainfall series (1 hour resolution) is used as an input. Data that are subject to the sensitivity analysis are changed for different trench exfiltration rates, and the effect on the size of the drained area is studied. At low trench exfiltration rates (1.8 mm.h-1), both the water holding capacity of the trench substrate and potential tree water uptake have a significant influence (more than a 20% change in the size of the drained area) and cannot be neglected. At good exfiltration rates (more than 18 mm.h-1) or when the trench is equipped with an underdrain, all studied parameters can be neglected. However, it is recommended to reduce the size of the drained area by 10-20%.

This comprehensive critical review shows how green buildings and energy optimization solutions improve indoor air quality as well as environmental quality (IEQ) and human health. Electricity-efficient green buildings create a better indoor atmosphere and save electricity. Green buildings improve occupant well-being through IAQ, thermal comfort, acoustics, and lighting. Renewable energy, green construction materials, and intelligent technologies increase sustainability and reduce environmental impact. Environmental hazards, architectural design, and societal variables can improve indoor air quality and subsequently reduce health risks linked with poor air quality. The evaluation highlights the pros and cons of low-cost IAQ sensors and equipment. These devices provide valuable insights, but calibration and validation using reference equipment are necessary to ensure accuracy and reliability. Architects, engineers, environmentalists, and policymakers are essential in creating green buildings with high IEQ. Prioritizing occupant comfort, health, and productivity ensures a sustainable and healthy future for future generations. However, continual monitoring and research are needed to improve green building practices and overcome construction problems. Intelligent models for continual on-field calibration of low-cost sensors may improve performance. Green buildings benefit occupants and the environment by optimizing energy use and using IAQ monitoring technologies.

This paper bases on panel data from 30 provinces and municipalities in China spanning the period of 2010 to 2021 to examine the evolving mechanisms and influencing factors of agricultural product circulation efficiency in the provinces along the Belt and Road Initiative (BRI) within the context of green total factor productivity (TFP). The study research employs various methodologies including the SBM-DDF model, GML index, system GMM, and global Moran's I index. The findings are as follows: Initially, the provinces along the BRI exhibit an overall negative growth trend in the green TFP of agricultural product circulation, with a noticeable decline observed particularly after the initiation of the BRI in 2014. Secondly, foreign investment levels significantly contribute to the positive enhancement of green TFP in agricultural product circulation among the provinces along the BRI. Eventually, environmental regulations, government support, and the level of international trade in agricultural products exert significant negative impacts. Thirdly, the results of spatial effect tests reveal substantial spatial spillover effects in the green TFP of agricultural product circulation among the provinces along the BRI, as demonstrated through examinations utilizing three distinct spatial matrices.

China is rich in coal resources under water bodies. However, for a long time, the safety prediction of high-intensity mining under water bodies is one of the problems encountered by the coal industry. It is of great significance to realize safe mining under water bodies, improve the recovery rate of coal resources and protect reservoir resources. Therefore, this article takes the No. 5 coal seam and No. 11 mining area of Wangwa Coal Mine as the research object, and integrates physical simulation, numerical simulation, theoretical analysis and other methods to study the development height of water-conducting fracture zones in fully mechanized top coal caving mining. Solid-liquid coupling physical simulation test reveals the failure characteristics of overlying strata in goaf and the seepage law of reservoir water under the influence of mining. By comparing the monitoring data of borehole leakage, the measured data obtained by borehole peeping with the height data of water-conducting fracture zone obtained by the traditional empirical formula of three-under standard, the error between the two is as high as -29.39 %. In this case, the variance correction coefficient is used to correct the empirical formula, and on this basis, in order to effectively protect the surface water dam and water body, the mining height of coal seam in the working face with limited height mining is inversely derived. The research results provide a basis for the safety prediction of high-intensity mining under the reservoir dam in the ecologically fragile areas of western China and provide a scientific guarantee for the formulation of safety measures under such conditions.

In green chemistry, filamentous fungi are regarded as a kind of robust microorganism for the biotransformation of natural products. Nonetheless, the screening of microorganisms is crucial for the effective biotransformation of natural products such as phenazine compounds. The precursor metabolite of most phenazine derivatives in Pseudomonas spp. is phenazine-1-carboxylic acid (PCA), the key constituent of shenqinmycin, widely used to control rice sheath blight in southern China. In this study, a new fungus strain Aspergillus sclerotiorum was isolated, which can efficiently convert PCA into 3-hydroxy-phenazine 1-carboxylic acid (3-OH-PCA). Moreover, an effective whole cells biotransformation system was constructed by screening optimal reaction conditions and carbon sources. Hence, Aspergillus sclerotiorum exhibited desirable adaptation by consumption of different carbon sources and maximum whole cell biomass (10.6 g/L DCW) was obtained as a biocatalyst from glucose. Optimal conditions for whole-cell biocatalysis of PCA were evaluated, including PCA concentration of 1120 mg/L, pH 7.0, temperature of 25°C, rotation rate 200 rpm and dry cell weight 15 g/L for 60 h, thus 1060 mg/L of 3-OH-PCA was obtained and the conversion efficiency of PCA was 94%. Hence, the results of repeated batch mood revealed that the biotransformation efficiency of fungus pellets reduced with each subsequent cycle but remained stable in all five cycles with the provision of glucose supplement. These findings open the prospective of using filamentous fungi for the whole cell biocatalysis of phenazine in enormous amount and efficient production of 3-OH-PCA. Moreover, these results laid the foundation for further research to disclose the genetic based mechanism of the strain responsible for PCA biotransformation.