This paper reports 2 × 4 hybrid Mach-zehnder interferometer (MZI) - multi-mode interferometers (MMI) based compact thermo-optical switch consisting of slab waveguides on silicon-on-insulator, SOI, platform. The device consists of two identical MMIs, each of 6 μm wide and 140 μm long connected with two phase shifters MMIs each with 2 μm wide and 8 μm long and linear tappers each 4 μm long, connected at both ends of the MMIs to minimize the power coupling loss. The loss for linear taper is found to be below 0.02dB. The footprint of the whole device is six 6 μm × 324 μm. This structure is based on unique multimode region shape, which leads optical switch to have less coupling loss and reduced cross-talk. The average thermo-optical switching power consumption is 1.4 mW, the excess losses are 0.8 dB, and the imbalances are 0.1 dB. Aluminum is used as a heating pad, and a trench is created around this pad to prevent from spreading of heat and reduce power loss almost by a factor of 2 to the adjacent phase shifter. Our new heating method has advantages of compact size and ease of fabrication with the current CMOS technology.

Piezoelectric properties are of significant importance to medical ultrasound, actuators, sensor, and countless other device applications. The mechanism of piezoelectric properties can be deeply understood from structure evolutions. In this paper, we report a diagram of structure evolutions of the Pb(Zn1/3Nb2/3)0.91Ti0.09O3 (PZN-9PT) single crystal with excellent piezoelectric properties among the orthorhombic, tetragonal, and cubic phases with temperature increasing from room temperature to 220 C. Through fitting the temperature dependence XRD curves with Gauss and Lorenz functions, we obtained the evolutions of the content ratio of three kinds of phases (orthorhombic, tetragonal and cubic) and the lattice parameters of the PZN-9PT system with the changes of temperature. The XRD fitting results together with Raman and dielectric spectrums show that the phase transitions of PZN-9PT are a typical continuous evolution process, very similar to the phase transition of paraffin from solid to liquid. Additionally, resonance and anti-resonance spectrum show excellent piezoelectric properties of the crystals, which probably originate from the nano twin domains, as demonstrated by the TEM images. Of particular attention is that the thickness electromechanical coupling factor kt is up to 72%.

Fabric phase sorptive extraction (FPSE) combines the advanced material properties of sol–gel derived microextraction sorbents and the flexible and permeable fabric support to create a robust, simple and green sample preparation device. It simultaneously improves the extraction sensitivity, and the speed of the extraction by incorporating high volume of sponge-like porous sol–gel hybrid inorganic–organic sorbents into permeable fabric substrates that is capable of extracting target analytes directly from simple to complex aqueous sample matrices. For the first time, this technique was applied to the trace level determination of selected polycyclic aromatic hydrocarbons (PAHs) in environmental water samples using a non-polar sol–gel C18 coated FPSE media. Several extraction parameters were optimized to improve extraction efficiency and to achieve high detection sensitivity. Validation tests of spiked samples showed good linearity for four selected PAHs (R² = 0.9983–0.9997) over a wide range of concentrations (0.010-10 ng/mL). Limits of detection (LODs) and quantification (LOQs) were measured at pg/mL levels, 0.1–1 pg/mL and 0.3–3 pg/mL, respectively. Inter- and intra-day precision tests showed variations of 1.1–4.1% for four selected PAHs. Average absolute recovery values were in the range of 88.1–90.5% surpassed the recovery prediction model, with relative standard deviations below 5%. The developed FPSE-HPLC-FLD protocol was finally applied to analyze 8 environmental water samples. Out of four selected PAHs, fluoranthene (Flu) and phenanthrene (Phen) were the most frequently detected in four samples, at concentration levels of 5.6–7.7 ng/mL and 4.1-11 ng/mL, respectively followed by anthracene (Anth) and pyrene (Pyr) in two samples. The newly developed FPSE-HPLC-FLD protocol is simple, green, fast and economical, with adequate sensitivity for trace levels of four selected PAHs and seems to be promising in routine monitoring of water quality and safety.

Two novel inorganic–organic hybrid supramolecular assemblies, namely, (4-HNA)(18-crown-6)(HSO₄) (1) and (4-HNA)₂(18-crown-6)₂(PF₆)₂(CH₃OH) (2) (4-HNA = 4-nitroanilinium), were synthesized and characterized by infrared spectroscopy, single X-ray diffraction, differential scanning calorimetry (DSC), and temperature-dependent dielectric measurements. The two compounds underwent reversible phase transitions at about 255 K and 265 K, respectively. These phase transitions were revealed and confirmed by the thermal anomalies in DSC measurements and abrupt dielectric anomalies during heating. The phase transition may have originated from the [(4-HNA)(18-crown-6)]⁺ supramolecular cation. The inorganic anions tuned the crystal packings and thus influenced the phase-transition points and types. The variable-temperature X-ray diffraction data for crystal 1 revealed the occurrence of a phase transition in the high-temperature phase with the space group of P2₁/c and in the low-temperature phase with the space group of P2₁/n. Crystal 2 exhibited the same space group P2₁/c at different temperatures. The results indicated that crystals 1 and 2 both underwent an iso-structural phase transition.

The feasible, reliable and selective multi-template molecularly imprinted polymers (MT-MIPs) based on SBA-15 (SBA-15@MT-MIPs) for the selective separation and determination of the trace level of ginsenoside Rb₁ (Rb₁), ginsenoside Rg₁ (Rg₁) and notoginsenoside R₁ (R₁) (Panax notoginseng saponins, PNS) from biological samples were developed. The polymers were constructed by SBA-15 as support, Rb₁, Rg₁, R₁ as multi-template, acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker. The new synthetic SBA-15@MT-MIPs were satisfactorily applied to solid-phase extraction (SPE) coupled with high performance liquid chromatography (HPLC) for the separation and determination of trace PNS in plasma samples. Under the optimized conditions, the limits of detection (LODs) and quantitation (LOQs) of the proposed method for Rb₁, Rg₁ and R₁ were in the range of 0.63-0.75 ng mL^-1 and 2.1-2.5 ng mL^-1, respectively. The recoveries of R₁, Rb₁ and Rg₁ were obtained between 93.4% and 104.3% with relative standard deviations (RSDs) in the range of 3.3-4.2%. All results show that the obtained SBA-15@MT-MIPs could be a promising prospect for the practical application in the selective separation and enrichment of trace PNS in the biological samples.

Results-Based Funding (RBF) for Reducing Emissions from Deforestation and Forest Degradation (REDD+) has become an important instrument for channeling financial resources to forest conservation activities. At the same time, much literature on conservation funding is ambiguous about the effectiveness of existing RBF schemes. Many effectiveness evaluations follow a simplified version of the principal-agent model, although in practice the relation between aid providers and funding recipients is much more complex. As a consequence, intermediary steps of conservation funding are often not accounted for effectiveness studies. This research paper aims to provide a nuanced understanding of conservation funding by analyzing the allocation of financial resources for one of the largest RBF schemes for REDD+ in the world: the Brazilian Amazon Fund. As part of this analysis, this study has built a dataset of information on Amazon Fund projects at unprecedented detail in order to accurately reconstruct the allocation of financial resources across different stakeholders (i.e. governments, NGOs, research institutions), geographies and activities. The results show that stakeholders seem to hold preferences with respect to the type of activities that they support, thereby suggesting that project owners exert much influence on how deforestation reduction is to be attained. There are evidences that governmental organizations lack financial additionality of their projects, which renders the growing share of funding to this type of stakeholder particularly worrisome. By contrast, the geographical distribution of financial resources seemed to follow a more focused rationale as financial support tends to concentrate in areas where deforestation threats are highest. Overall, the allocation of the financial resources from the Amazon Fund reflects an arbitrary support of different projects that adopt very diverging theories of change that are not primarily concerned with attaining further deforestation reductions. As projects owners exert influence on funding effectiveness to some extent, the Amazon Fund may either seek to regulate the allocation of financial resources more actively or adopt funding effectiveness evaluations that account for this influence more comprehensively.

That how to improve the sensitivity and the detection ability of the Large-caliber sensor is critical to satisfy the requirement of heavy vehicle wear condition monitoring. In this paper, we introduced the LC resonance principle to the design of sensor with large flow channel (7mm). The resonant exciting coil increases the impedance change of the exciting circuit caused by wear particles which magnify the current difference between the two exciting coils and improve the sensitivity of the sensor. The resonant induction coil greatly suppresses the interference signals and magnifies the weak induced electromotive force which is beneficial to enhance the detection ability. In order to boost the detectability for different materials particles, a phase controlled variable-frequency exciting system (PCVFES) was adopted to automatically switch the exciting frequency between 284kHz for ferromagnetic particles and 420KHz for non-ferromagnetic particles. For the weak signal detection, based on the essential characteristic of the signal, we apply a simpler method that modified lock-in amplifier (MLIA) rather than the conventional algorithms (Wavelet transform, EMD). Results show that using these methods the sensitivity and the detection ability of the sensor are significantly improved and the 75μm iron particles and 220μm copper particles were successfully detected which realizes the initial abnormal wear monitoring for the large flow project.

With the rapid development of satellite remote sensing technology, the volume of image datasets in many application areas is growing exponentially and the demand for Land-Cover and Land-Use change remote sensing data is growing rapidly. It is thus becoming hard to efficiently and intelligently retrieve the change information that users need from massive image databases. In this paper, content-based image retrieval is successfully applied to change detection and a content-based remote sensing image change information retrieval model is introduced. First, the construction of a new model framework for change information retrieval in a remote sensing database is described. Then, as the target content cannot be expressed by one kind of feature alone, a multiple-feature integrated retrieval model is proposed. Thirdly, an experimental prototype system that was set up to demonstrate the validity and practicability of the model is described. The proposed model is a new method of acquiring change detection information from remote sensing imagery and so can reduce the need for image pre-processing, deal with problems related toseasonal changes as well as other problems encountered in the field of change detection. Meanwhile, the new model has important implications for improving remote sensing image management and autonomous information retrieval.

Fossil-based emissions can be avoided through using wood in place of non-renewable raw materials as energy and materials. However, increasing wood harvest influences forest carbon stocks. This effect may reduce the overall climate benefit of wood use significantly but is widely overlooked. We carried out a systematic review of simulation studies and compared differences in forest carbon and amount of wood harvested between more and less intensive wood harvest scenarios for three different time perspectives; short (1-30 years), mid (31-70 years) and long (71-100 years). Out of more than 450 reviewed studies 44 provided adequate data. Our results show that increased harvesting reduced carbon stocks over 100 years in temperate and boreal forests roughly 1.6 (stdev 0.9) t_C per t_C harvested. The value proved to be robust when outliers explicitly influenced by other factors than change in harvest rate, such as increase in fertilization or forest area, were removed. Interestingly, no significant difference in carbon impacts was found for average values of boreal and temperate forests or between short and long time-horizons. However, impacts tend to be greatest in the mid-term. This carbon balance indicator that we estimated can be interpreted as carbon debit of wood harvest in forests. It is significant compared with the typical GHG credits in technosphere generated by avoiding fossil emissions in substitution and increase in carbon storage in harvested wood products, and should not be ignored. Our estimates provide default values that can directly be included in GHG balances of products or assessment of mitigation policies and measures related to wood use. However, more systematic scenarios and transparent data in which different factors influencing forest carbon stocks are separately studied are clearly required to provide better constrained estimates for specific forest types.

Ketogenic diet (KD) is getting in the focus as auxiliary cancer therapy, since it provides sufficient energy supply for healthy cells, while impairing energy production in tumor cells underlying the Warburg effect. Thereby, it can assist in inhibiting tumor growth and simultaneously counteract cachexia, which is frequently observed in cancer patients under chemotherapy. In order to provide molecular evidence for the proposed synergistic inhibition of tumor growth, we applied untargeted quantitative metabolome analysis on a breast cancer xenograft mouse model. Healthy mice and such bearing breast cancer xenografts and receiving chemotherapy were compared after treatment with control diet and KD. Metabolomic profiling was performed on plasma samples, applying high-performance liquid chromatography coupled to tandem mass spectrometry. Statistical analysis revealed metabolic fingerprints comprising numerous significantly regulated features in the group of mice bearing breast cancer. This fingerprint disappeared after treatment with KD, resulting in recovery to the metabolic status observed in healthy mice receiving control diet. Moreover, amino acid metabolism as well as fatty acid transport were found to be affected by both, the tumor and the applied KD. Our results provide clear evidence of a significant molecular effect of KD in the context of tumor growth inhibition.

Dietary patterns established during adolescence might play a role in adulthood disease. We examined the stability of dietary patterns (DPs) from childhood through adolescence and into young adulthood (from age 8 to 34 years). Data from 130 participants (53 females) of Saskatchewan Pediatric Bone Mineral Accrual Study (aged 8-15 years, at baseline) were included. Multiple 24-hour recalls were collected annually from 1991 to 1997, 2002 to 2005 and 2010 and 2011. Using principal component analysis, “Vegetarian-style”, “Western-like”, “High-fat, high-protein”, “Mixed” and “Snack” DPs were derived at baseline. Applied DP scores for all annual measurements were calculated using factor loading of baseline DPs and energy-adjusted food group intakes. We analyzed data using generalized estimating equations. The tracking coefficient represents correlation between baseline dietary pattern scores and all other follow-up dietary pattern scores. We found a moderate tracking for the “Vegetarian-style” (ß=0.44, P<0.001) and “High-fat, high-protein” (ß=0.39, P<0.001) DPs in females and “Vegetarian-style” DP (ß=0.30, P<0.001) in males. Remaining DPs showed a poor-to-fair tracking in both sexes. No tracking for “Western-like” DP in females was observed. Assessing overall change in DP scores from childhood to young adulthood showed an increasing trend in adherence to “Vegetarian-style” DP and decreasing trend in adherence to “High-fat, high-protein” DP by age in both sexes (P<0.001). While “Western-like” and “Mixed” DP scores increased only in males (P<0.001). These findings suggest that healthy dietary habits established during childhood and adolescence moderately continue into adulthood.

This study assessed the impact of climate change on water availability and variability in two subbasins in the Upper Blue Nile Basin of Ethiopia. Downscaled future climate data from HadCM3 of A2 (medium-high) and B2 (medium-low) emission scenarios were compared to the observed climate data for a baseline period (1961 to 1990). The emission scenario representing the baseline period was used to predict future climate and as input to a hydrologic model to estimate the impact of future climate on the streamflow at three future time horizons 2020 - 2045, 2045 - 2070 and 2070 - 2100. Results suggest that medium-high emission scenario best represents the local rainfall and temperature pattern. With A2 scenario, daily maximum/minimum temperature will increase throughout the future time horizons. The minimum and maximum temperature will increase by 3.6^oC and 2.4^oC, respectively, towards the end of the 21st century. Consequently, potential evapotranspiration is expected to increase by 7.8%, though trends in annual rainfall do not show statistically meaningful trends between years. A notable seasonality was found in the rainfall pattern such that dry season rainfall amounts are likely to increase and wet season rainfall to decrease. The hydrological model indicated that the local hydrology of the study watersheds will be significantly influenced by climate change. Overall, at the end of the century, streamflow will increase in both rivers by up to 64% in dry seasons and decrease by 19% in wet seasons.

The importance of predicting the exposure to environmental hazards is highlighted by issues like global climate change, public health problems caused by environment stresses, and property damages and depreciations. Several approaches have been used to assess potential exposure and achieve optimal results under various conditions, for example, for different scales, groups of people, or certain points in time. Micro-simulation tools are becoming increasingly important in human exposure assessment, where each person is simulated individually and continuously. This paper describes an agent-based model (ABM) framework that can dynamically simulate human exposure levels, along with their daily activities, in urban areas that are characterized by environmental stresses such as air pollution and heat stress. Within the framework, decision making processes can be included for each individual based on rule-based behavior to achieve goals under changing environmental conditions. The ideas described in this paper are implemented in a free and open source NetLogo platform. A simplified modeling scenario of the ABM framework in Hamburg, Germany, further demonstrates its utility in various urban environments and individual activity patterns, and portability to other models, programs and frameworks. The prototype model can potentially be extended to support environmental incidence management by exploring the daily routines of different groups of citizens and compare the effectiveness of different strategies. Further research is needed to fully develop an operational version of the model.

The Storm Water Management Model (SWMM) was used to evaluate the impact of urbanization, climate change, and implementation of Low Impact Developments (LIDs) at the Mahabad Dam watershed, Iran. Several scenarios of urbanization, with and without climate change impacts, in different locations were defined, including near outlet, middle, far end, and whole watershed. Climate change was considered to change the intensity of rainfall and increase evaporation. Vegetative swales were implemented as LIDs to evaluate their applicability to reduce pollutant loads. Digital Elevation Model (DEM) of the area was input into ArcGIS, and the watershed was delineated using the ArcSWAT extension to identify topographic features. Water quality properties were defined in the software, and each scenario was run for a twelve-hour simulation. The results indicated that urbanization affects the imperviousness of sub-catchments, and location of urbanization affects the amount and timing of runoff and pollutant yields. Fifty-percent urbanization near the watershed outlet resulted in 23.1% and 27.4% increases in runoff and pollutant loads, respectively. Fifty-percent urbanization in the middle resulted in 28.8% and 35.4% increases in runoff and pollutant loads; and, at the far end, 23.1% and 3.9% increases in runoff and pollutant loads were the result; Fifty-percent urbanizing the whole watershed gave 58.6% and 66.3% increases in runoff and pollutant loads, respectively; Under climate change scenarios (higher intensity, shorter duration rainfall) peaks occurred earlier. Moreover, results showed LIDs decreased pollution loads up to 25%.

The present work describes the optimization and validation of a highly selective and sensitive analytical method using solid phase extraction and liquid chromatography tandem mass spectrometry (SPE LC-MS/MS) for the determination of some frequently prescribed pharmaceuticals in urban wastewater received and treated by Sharjah sewage treatment plant (STP). The extraction efficiency of different SPE cartridges was tested and the simultaneous extraction of pharmaceuticals was successfully accomplished using hydrophilic-lipophilic-balanced reversed phase Waters^® Oasis HLB cartridge (200 mg/ 6 mL) at pH 3. The analytes were separated on an Aquity BEH C₁₈ column (1.7 µm, 2.1 mm x 150 mm) using gradient elution and the mass spectrometric analysis were performed in multiple reactions monitoring (MRM) selecting two precursor ions to produce ion transition for each pharmaceutical using positive electrospray ionization (+ESI) mode. The correlation coefficient values in the linear calibration plot for each target compound exceeded 0.99 and the recovery percentages of the investigated pharmaceuticals were more than 84%. Limit of detection (LOD) varied between 0.1-1.5 ng/L and limit of quantification (LOQ) was 0.3-5 ng/L for all analytes. The precision of the method was calculated as the relative standard deviation (RSD%) of replicate measurements and was found to be in the ranges of 2.2% to 7.7% and 2.2% to 8.6% for inter and intra-day analysis, respectively. All of the obtained validation parameters satisfied the requirements and guidelines of analytical method validation.

Land use/land cover (LULC) and climate changes are two main factors directly affecting hydrologic conditions. However, very few studies in Vietnam have investigated changes in hydrological process under the impact of climate and land use changes on a basin scale. The objective of this study is to assess the individual and combined impacts of land use and climate changes on hydrological processes for the Nam Rom river basin, Northwestern Viet Nam using Remote Sensing (RS) and Soil and Water Assessment Tools (SWAT) model. SWAT model was used for hydrological process simulation. Results indicated that SWAT proved to be a powerful tool in simulating the impacts of land use and climate change on catchment hydrology. The change in historical land use between 1992 and 2015 strongly contributed to increasing hydrological processes (ET, percolation, ground water, and water yield), whereas, climate change led to significant decrease of all hydrological components. The combination of land use and climate changes significantly reduced surface runoff (-16.9%), ground water (-5.7%), water yield (-9.2%), and sediment load (-4.9%). Overall climatic changes had more significant effect on hydrological components than land use changes in the Nam Rom river basin during the 1992–2015. Under impacts of projected land use and climate change scenarios in 2030 on hydrological process of the upper Nam Rom river basin indicate that ET and surface flow are more sensitive to the changes in land use and climate in the future. In conclusion, the findings of this study will basic knowledge of the effects of climate and land-use changes on the hydrology for future development of integrated land use and water management practices in Nam Rom river basin.

Agriculture and farming worldwide are responsible for numerous environmental threats, including degradation of land and water resources depletion. Underlining the dynamic interaction between bio-physical and socio-economic drivers is the key towards a more sustainable land and water management. With regard to a highly developed agricultural area in southern Italy, multi-regression models were developed to interpret the observed inter-annual variability of cropped land. Main drivers related to Common Agricultural Policy support, product market prices, crop yield and irrigation water availability were investigated. The adopted models revealed the different weighs of each driver. The findings reported the role that direct payments played in supporting the extension of irrigated crops, such as processing tomato. Likewise, the models pointed to decoupled payment scheme as the most important driver of change in the crop pattern over the last years.

The calculation of the standard enthalpies of vaporization, sublimation and solvation of organic molecules is presented using a common computer algorithm on the basis of a group-additivity method. The same algorithm is also shown to enable the calculation of their entropy of fusion as well as the total phase-change entropy of liquid crystals. The present method is based on the complete break-down of the molecules into their constituting atoms and their immediate neighbourhood; the respective calculations of the contribution of the atomic groups by means of the Gauss-Seidel fitting method is based on experimental data collected from literature. The feasibility of the calculations for each of the mentioned descriptors was verified by means of a 10-fold cross-validation procedure proving the good to high quality of the predicted values for the three mentioned enthalpies and for the entropy of fusion, whereas the predictive quality for the total phase-change entropy of liquid crystals was poor. The goodness of fit (Q²) and the standard deviation (σ) of the cross-validation calculations for the five descriptors was as follows: 0.9641 and 4.56 kJ/mol (N=3386 test molecules) for the enthalpy of vaporization, 0.8657 and 11.39 kJ/mol (N=1791) for the enthalpy of sublimation, 0.9546 and 4.34 kJ/mol (N=373) for the enthalpy of solvation, 0.8727 and 17.93 J/mol/K (N=2637) for the entropy of fusion and 0.5804 and 32.79 J/mol/K (N=2643) for the total phase-change entropy of liquid crystals. The large discrepancy between the results of the two closely related entropies is discussed in detail. Molecules, for which both the standard enthalpies of vaporization and sublimation were calculable, enabled the estimation of their standard enthalpy of fusion by simple subtraction of the former from the latter enthalpy. For 990 of them the experimental enthalpy-of-fusion values are also known, allowing their comparison with predictions, yielding a correlation coefficient R² of 0.6066.

Fabric phase sorptive extraction, an innovative integration of solid phase extraction and solid phase microextraction principles, has been combined with gas chromatography-mass spectrometry for the rapid extraction and determination of nineteen organochlorine pesticides in various fruit juices and water samples. FPSE consolidates the advanced features of sol-gel derived extraction sorbents with the rich surface chemistry of cellulose fabric substrate, which could directly extract target analytes from complex sample matrices and substantially simplifies the sample preparation operation. Important FPSE parameters including sorbent chemistry, extraction time, stirring speed, type and volume of back-extraction solvent and back-extraction time have been optimized. Calibration curves were obtained in the concentration range 0.1-500 ng/mL. Under the optimum conditions, the limits of detection were obtained in the range 0.007-0.032 ng/mL with satisfactory precision (RSD<6%). The relative recoveries obtained by spiking organochlorine pesticides in water and selected juice samples were in the range of 91.56–99.83%. The sorbent sol-gel poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) was applied for the extraction and preconcentration of organochlorine pesticides in aqueous and fruit juice samples prior to analysis with gas chromatography-mass spectrometry. The results demonstrated that the present method is simple, rapid, and precise for the determination of organochlorine pesticides in aqueous samples.

This paper performs non-parametric Mann Kendall (MK) trend analysis of historical hydroclimatic data (1961-2016), an ensemble climate model validation and a computation of 16 Expert Team on Climate Change Detection and Indices (ETCCDI) temperature and rainfall extremes indices. The climate indices are evaluated using MK test and annual trend analysis for two Representative Concentration Pathways (RCP4.5 & RCP8.5) future scenarios from 2020 to 2045 over Mono River Basin (MRB) in Togo. The annual and seasonal trend analyses are assessed on historical potential evapotranspiration, mean temperature, rainfall and discharge data. Results show positive and negative trends of hydroclimatic data over MRB from1961 to 2016. Mean temperatures increase significantly in most of the stations while a negative non-significant trend is noticed for rainfall. Meanwhile, the discharge presents a significant seasonal and annual trend for three gauge stations (Corrokope, Nangbéto and Athiémé). Validation of the ensemble climate models reveals that the model under-estimates observations at Sokode, Atkakpamé and Tabligbo stations, however linear regression and spatial correlation coefficients are higher than 0.6. Moreover, the percentage of bias between climate model and observations are less than 15% at most of the stations. Finally, the computation of extreme climatic indices under RCP4.5 and RCP8.5 scenarios shows a significant annual trend of some extreme climatic indices of rainfall and temperature at selected stations between 2020 and 2045 in the MRB. Therefore, relevant governmental politics are needed to elaborate strategies and measures to cope with projected climate changes impacts in the country.

Urban growth in various cities across the world, especially in developing countries, leads to land use change. Thus, predicting future urban growth in the most rapidly growing region of Nigeria becomes a significant endeavor. This study analyzes land use and land cover (LULC) change and predicts the future urban growth of the Lagos metropolitan region, using Cellular Automata (CA) model. To achieve this, the GlobeLand30 datasets from years 2000 and 2010 were used to obtain LULC maps, which were utilized for modeling and prediction. Change analysis and prediction for LULC scenario for 2030 were performed using LCM and CA_Markov chain modeling. The results show a substantial growth of artificial surfaces, which will cause further reductions in cultivated land, grassland, shrubland, wetland, and waterbodies. There was no appreciable impact of change for bare land, as its initial extent of cover later disappeared completely. Additionally, artificial surfaces/urban growth in Lagos expanded to the neighboring towns and localities in Ogun State during the study period, and it is expected that such growth will be higher in 2030. Lastly, the study findings will be beneficial to urban planners and land use managers in making key decisions regarding urban growth and improved land use management in Nigeria.

Thin Slab Casting and Directing Rolling (TSCDR) has become a major process for flat- rolled production. However, the elimination of slab reheating and limited number of thermomechanical deformation passes leave fewer opportunities for austenite grain refinement resulting in some large grains persist in the final microstructure. In order to achieve excellent Ductile to Brittle Transaction (DBTT) and Drop Weight Tear Test (DWTT) properties in thicker gauge high strength low alloy products, it is necessary to control austenite grain coarsening prior to the onset of thermomechanical processing. This contribution proposes a suite of methods to refine the austenite grain from both theoretical and practical perspective including: increasing cooling rate during casting, liquid core reduction, increasing austenite nucleation sites during the delta ferrite to austenite phase transformation, controlling holding furnace temperature and time to avoid austenite coarsening, and producing new alloy with two phase pinning to arrest grain coarsening. These methodologies can not only refine austenite grain size in the slab center, but also improve the slab homogeneity.

Hydro-climatic projections in West Africa are attributed with high uncertainties that are difficult to quantify. This study assesses the influence of the parameter sensitivities and uncertainties of three rainfall runoff models on simulated discharge in current and future times using meteorological data from 8 Global Climate Models. The IHACRES Catchment Moisture Deficit (IHACRES-CMD) model, the GR4J and the Sacramento model were chosen for this study. During model evaluation, 10,000 parameter sets have been generated for each model and used in a sensitivity and uncertainty analysis using the Generalized Likelihood Uncertainty Estimation (GLUE) method. Out of the three models, IHACRES-CMD recorded the highest Nash-Sutcliffe Efficiency (NSE) of 0.92 and 0.86 for the calibration (1997-2003) and the validation (2004-2010) period respectively. The Sacramento model was able to adequately predict low flow patterns on the catchment while the GR4J and IHACRES-CMD over and under estimate low flow respectively. The use of multiple hydrological models to reduce uncertainties caused by model approaches is recommended along with other methods of sustainable river basin managements.

Personality changes have been reported to occur following organ transplantation, and most commonly among heart transplant recipients. We set out to examine whether personality changes do occur following transplantation, and specifically, what types of changes occur among heart transplant recipients compared to other organ recipients. A cross-sectional study was conducted in 2022, in which 47 participants (23 heart recipients and 24 other organ recipients) completed an online survey. In this study, 89% of all transplant recipients reported experiencing personality changes after receiving their organ transplant, which was similar for heart and other organ recipients. With the exception of physical attributes, the types of personality changes reported were similar between the two groups. These finding indicate that heart transplant recipients are not unique in their reported experience of personality changes following organ transplantation. Further studies are needed to deepen our understanding of what causes these personality changes following organ transplantation.

Most of the phase change materials (PCMs) have been limited to use as functional additions or sealed in containers, and extra auxiliary equipment or supporting matrix is needed. The emergence of 3D printing technique has dramatically advanced the developments of materials and simplified production processes. This study focuses on a novel strategy to model thermal energy storage crystalline gels with three-dimensional architecture directly from liquid resin without supporting materials through light-induced polymerization 3D printing technique. A mask-projection stereolithography printer was used to measure the 3D printing test, and the printable characters of crystalline thermal energy storage P(SA-DMAA) gels with different molar ratios were evaluated. For the P(SA-DMMA) gels with small fraction of SA, the 3D fabrication was realized with higher printing precision both on mili- and micro-meter scales. As a comparison of 3D printed samples, P(SA-DMAA) gels made by other two methods, post-UV curing treatment after 3D printing and UV curing using conventional mold, were prepared. The 3D printed P(SA-DMAA) gels shown high crystallinity. Post–UV curing treatment was beneficial to full curing of 3D printed gels, but did not lead to the further improvement of crystal structure to get higher crystallinity. The P(SA-DMAA) crystalline gel having the highest energy storage enthalpy that reached 69.6 J·g⁻¹ was developed. Its good thermoregulation property in the temperature range from 25 to 40 °C was proved. The P(SA-DMAA) gels are feasible for practical applications as one kind of 3D printing material with thermal energy storage and thermoregulation functionality.

The results reveal CILSS as the most accurate data set with a Kappa coefficient of 68% and an overall accuracy of 83%. CILSS data shows a decrease of savanna and forest whereas an increase of cropland over the period 1975 to 2013. The increase of cropland area of 30.97% from 1975 to 2013 can be related to the increase in population and their food demand, while the losses of forest area and the decrease of savanna are further amplified by using wood as energy sources and the lack of forest management. The three datasets were used to simulate future LULC changes using the Terrset Land Change Modeler. The validation of the model using CILSS data for 2013 showed a quality of 50.94%, it is only 40.04% for ESA and 20.13% for Globeland30. CILSS data was utilized to simulate the LULC distribution for the years 2020 and 2027 because of its satisfactory performances. The results show that a high spatial resolution is not a guarantee of high quality. The results of this study can be used for impact studies and to develop management strategies for mitigating negative effects of land use and land cover change.

Climate variability and change has been found to be one of the factors that affect economies leading to food insecurity in various parts of the world. Kenya is no exception. This study looks at how climate variability has contributed to food insecurity in Kisii County, Kenya. The objectives of this study is therefore to, (i) to examine the rainfall and temperature trends in Kisii County for a period of approximately 30 years, (ii) to examine the effect of climate variability on food production and (iii) to assess the perception of local farmers on weather and climate information, (iv) to evaluate the coping strategies adopted at to bridge the gap on food deficit at different household level and (v) to assess the nutritional status of children and the elderly. The study was conducted in two sub-counties of Kisii County; Marani and Bomachoge Chache. The data used was mainly rainfall and temperature data from meteorological stations and sample data gathered from selected groups. The study population comprised of children between 6 months and 59 months, household heads, elderly people and agricultural officers. Purposive sampling was used to select agricultural officers while multistage sampling was used to select respondents at household level. Data was collected by use of a pre-tested questionnaire. The MUAC tape was used to collect nutritional status of children while BMI data was obtained from elderly people. Mann Kendall statistic was used to determine whether the trend of rainfall and temperature observed is significant while Chi-square test was used to determine whether the coping strategies observed varied significantly at household level. From the analysis, rainfall has not shown any significant change in Kisii County while temperature trend has been significantly increasing over the years at 95% confidence level. This could explain the observed reduction in river levels. Analysis of crop production and price trends of major food crops in Kisii County showed a decreasing trend of food production leading to increase in price over the years. This meant that farmers could not produce enough to take them to the next harvesting season making farmers to adopt different coping strategies at household level which differed significantly according to Chi-Square test. Malnutrition status of both elderly people above 59 years and children between 6-59 months were similar with 23% of both children/elderly being severely malnourished/malnourished. This study has only looked at climatic factors such as rainfall and temperature. Other aspects such as depth of underground water, ph level of soil and the effects of land fragmentation also need to be looked at. This study is important to both farmers in choosing the right crop to plant, and policy makers and planners in formulating the best mitigation and intervention strategies for Kisii County food insecurity problem. This will further contribute to national efforts towards achievement of vision 2030.

Tree-killing bark beetles are the most economically important insects in conifer forests worldwide. Yet despite >200 years of research, the drivers of population eruptions or crashes are still not fully understood, precluding reliable predictions of the effects of global change on beetle population dynamics and impacts on ecosystems and humans. We critically analyze potential biotic and abiotic drivers of population dynamics of the European spruce bark beetle (Ips typographus) and present a novel ecological framework that integrates the multiple drivers governing this bark beetle system. We call for large-scale collaborative research efforts to improve our understanding of the population dynamics of this important pest; an approach that might serve as a blueprint for other eruptive forest insects.

Quantum Fisher Information (QFI) is a very useful concept for analyzing situations that require phase sensitivity. It become a popular topic especially in Quantum Metrology domain. In this work, we study the changes in quantum Fisher information (QFI) values for one relative arbitrary phased quantum system consisting of a superposition of N Qubits W and GHZ states. In a recent work [7], QFI values of this mentioned system for N qubits were studied. In this work, we extend this problem for the changes of QFI values in some noisy channels for the studied system. We show the changes in QFI depending on noise parameters. We report interesting results for different type of decoherence channels. We show the general case results for this problem.

The indigenous communities across the globe especially in the rural areas consume locally available plants known as Traditional Food Plants (TFPs) for their nutritional and health-related needs. Recent research shows that many of the traditional food plants are highly nutritious as they contain health beneficial metabolites, vitamins, mineral elements and other nutrients. Excessive reliance on the mainstream staple crops has its own disadvantages. TFPs are nowadays considered important crops of the future and can act as supplementary foods for the burgeoning global population. They can also act as emergency foods in times of pandemics and other situations like COVID-19. The current situation necessitates locally available alternative nutritious TFPs for sustainable food production. To increase the cultivation or improve the traits in TFPs, it is essential to understand the molecular basis of the genes that regulate some important traits such as nutritional components and resilience to biotic and abiotic stresses. The integrated use of modern omics and gene editing technologies provide great opportunities to better understand the genetic and molecular basis of superior nutrient content, climate-resilient traits and adaptation to local agroclimatic zones. Recently, realising the importance and benefits of TFPs, scientists have shown interest in the prospection and sequencing of traditional food plants for their improvements, further cultivation and mainstreaming. Integrated omics such as genomics, transcriptomics, proteomics, metabolomics and ionomics are successfully used in plants and have provided a comprehensive understanding of gene-protein-metabolite networks. Combined use of omics and editing tools has led to successful editing of beneficial traits in few TFPs. This suggests that there is ample scope of integrated use of modern omics and editing tools/techniques for improvement of TFPs and their use for sustainable food production. In this article, we highlight the importance, scope and progress towards improvement of TFPs for valuable traits by integrated use of omics and gene editing techniques.

This article discusses how, in today’s world of disruptive and dramatic social change (DSC), non-sports related coaching, which includes a wide range of services such as life coaching, career coaching, executive coaching, and team coaching, can inadvertently fuel undesirable social dynamics. There is little or no awareness of this risk among coaches and coachees. The global, fast-growing, multi-billion-dollar industry aimed at supporting people and organisations to perform better and increase wellbeing while managing and adapting to change has been developed with limited sociological input. The article is based on 15 years of social constructionist-informed reflective practice by a sociologist-turned-coach, and uses a multi-layered autoethnographic account to argue for a sociologically informed paradigm shift in coaching, as well as relevant sociological knowledge and social and human sciences research methodology in coaches’ education. It presents the rationale and key features of a new coaching approach that places DSC-relevant sociological concepts at the heart of the coaching process, helps people develop psycho-sociological awareness, and uses a learning-to-develop through research design. A new definition of coaching to address DSC is derived. Coaching practitioners will find DSC-relevant sociological concepts, critical reflections, coaching questions, and procedures to expand coaching effectiveness. Interdisciplinary research topics combining coaching sociology and coaching psychology are suggested.

With large-scale distributed generators (DGs) in an active distribution network (ADN), conventional load flow convergence failure is incurred by heavy power transmission. The Holomorphic Embedding Load Flow Method (HELM) has proven to be more robust than the Newton–Raphson method under heavy power transmission. At present, HELM is mainly designed for balanced transmission networks. In this study, we developed a three-phase HELM model to accommodate DGs, delta connection loads, and ZIP loads for ADN. The effectiveness and better performance of the proposed method under heavy load situations were validated using modified unbalanced IEEE 13, 34, 37, and 123 test feeders.

Nature-based solutions (NbS) - working with and enhancing nature to address societal challenges - are increasingly being featured in climate change adaptation policy and plans. While there is growing evidence that NbS can reduce vulnerability to climate change impacts in general, there is a lack of understanding on the mechanisms through which this can be achieved, particularly in the Global South. To address this, we analyse 85 nature-based interventions in rural areas across the Global South, and factors mediating their effectiveness, based on a systematic map of peer-reviewed studies encompassing a wide diversity of ecosystems, climate impacts, and intervention types. We develop and apply an analytical framework of people’s social-ecological vulnerability to climate change, in terms of six pathways of vulnerability reduction: social and ecological exposure, sensitivity, and adaptive capacity. Most cases (95%) report a reduction in vulnerability, primarily by lowering ecosystem sensitivity to climate impacts (73% of interventions), followed by reducing social sensitivity (52%), reducing ecological exposure (36%), increasing social adaptive capacity (31%), increasing ecological adaptive capacity (19%) and/or reducing social exposure (14%). An analysis of mediating factors shows that social dimensions are equally important as technical factors in NbS to achieving equitable and effective outcomes. Attention to the distinct social and ecological pathways through which vulnerability is reduced helps to harness the multiple benefits of working with nature in a warming world.

Land cover change detection (LCCD) based on bi-temporal remote sensing images plays an important role in the inventory of land cover change. Due to the benefit of having spatial dependency properties within the image space while using remote sensing images for detecting land cover change, many contextual information based change detection methods have been proposed during past decades. However, there is still a space for improvement in accuracies and usability of LCCD. In this paper, a LCCD method based on adaptive contextual information is proposed. First, an adaptive region is constructed by gradually detecting the spectral similarity surrounding a central pixel. Second, the Euclidean distance between pairwise extended regions is calculated to measure the change magnitude between the pairwise central pixels of bi-temporal images. While the whole bi-temporal images are scanned pixel-by-pixel, the change magnitude image (CMI) can be generated. Then, the Otsu or a manual threshold is employed to acquire the binary change detection map (BCDM). The detection accuracies of the proposed approach are investigated by two land cover change cases with Landsat bi-temporal remote sensing images. In comparison to several widely used change detection methods, the proposed approach can achieve a land cover change inventory map with a competitive accuracy.

It is strongly desirable to accurately detect the clouds in hyperspectral images onboard before compression. However, conventional onboard cloud detection methods are not appropriate to all situation such as shadowed cloud or darken snow covered surfaces which are not identified properly in the NDSI test. In this paper, we propose a new spectral–spatial classification strategy to enhance the orbiting cloud screen performances obtained on hyperspectral images by integrating threshold exponential spectral angle map (TESAM), adaptive Markov random field (aMRF) and dynamic stochastic resonance (DSR). TESAM is performed to classify the cloud pixels coarsely based on spectral information. Then aMRF is performed to do optimal process by using spatial information, which improved the classification performance significantly. Some misclassification points still exist after aMRF processing because of the noisy data in the onboard environment. DSR is used to eliminate misclassification points in binary labeling image after aMRF. Taking level 0.5 data from hyperion as dataset, the average overall accuracy of the proposed algorithm is 96.28% after test. The method can provide cloud mask for the on-going EO-1 images and related satellites with the same spectral settings without manual intervention. The experiment indicate that the proposed method reveals better performance than the classical onboard cloud detection or current state-of-the-art hyperspectral classification methods.

Structural information of biological macromolecules is crucial and necessary to deliver predictions about the effects of mutations—whether polymorphic or deleterious (i.e., disease causing), wherein, thermodynamic parameters, namely, folding and binding free energies potentially serve as effective biomarkers. It may be emphasized that the effect of a mutation depends on various factors, including the type of protein (globular, membrane or intrinsically disordered protein) and the structural context to which it occurs. Such information may positively aid drug-design. Furthermore, due to the intrinsic plasticity of proteins, even mutations involving radical change of the structural and physico-chemical properties of the amino acids (native vs. mutant) can still have minimal effects of protein thermodynamics. However, if a mutation causes significant perturbation of either folding or binding free energies, it is quite likely to be deleterious. Mitigating such effects is a promising alternative to the traditional approaches of designing inhibitors. This can be done by structure-based in silico screening of small molecules for which binding to the dysfunctional protein restores its wild type thermodynamics. In this review we emphasize on the effects of mutations on two important biophysical characteristics, stability and binding affinity, and how structures can be used for structure-based drug design to mitigate the effects of disease-causing variants on the above biophysical characteristics.

CASBEE-City tool determines the city’s Built Environment Efficiency (BEE) by calculating the improvement of Quality of Life (Q) over human activities’ Environmental Load (L) within the city’s hypothetical boundary. A total of 58 variables (57 Q indicators and one variable for L) are used in the worldwide version of CASBEE-City which were grounded using ISO 37120:2014 Sustainable Development of Communities and 17 Sustainable Development Goals (SDGs) by the United Nations (UN). This paper examines the application of CASBEE-City for Malaysian cities using the case of Johor Bahru City and identifies assessment indicators which are customised based on the data availability, reliability and suitability through focus group discussions (FGDs) which involved 36 respondents (researchers, urban planners and stakeholders). This paper reveals Johor Bahru with moderate score B+ in 2010 and 2025. Consensus were also achieved from the 36 FGD respondents for the practicability and future potential of CASBEE-City and BEE framework in Johor Bahru.

Below T_CO=157 K the quasi-one-dimensional charge-transfer salt (TMTTF)_2SbF_6 undergoes a pronounced phase transition to a charge-ordered ground state. We have explored the non-linear and photoconductive behavior as a function of applied voltage, laser pulse energy and temperature. Besides a decay of the photoconductive signal in a double exponential fashion in the millisecond range, we discover current oscillations in the kHz range induced by the application of short laser pulses. While the resonance frequencies do not depend on voltage or laser intensity and vary only slightly with temperature, the amplitude changes linearly with the laser intensity and voltage. The findings are discussed and compared to comparable phenomena in other low-dimensional electron systems.

This article is a followup to an earlier review which outlined some of the interesting features of the soliton/wave-action potential (AP) model, and noted the need to test its key aspects; including the need to test if its presumed lipid phase transition is actually happening during AP firings in excitable cells. The intent here is to point out the sort of tests, and evidence from them, that might be needed if the soliton/wave-AP model is to be accepted broadly by biologists. Here, after an overview of the modern electrophysiological-AP model and of the soliton/wave-AP model, there are three areas considered. First, possible compositional influences on membrane properties relative to the soliton/wave-AP model are presented. Including questions with regard to the soliton/wave-AP model’s assumption that changes in surface potentials influence the transmembrane potential. Second, some recent work from the good folks who advocate for the soliton/wave-AP model concerning the occurrence of lipid phase transitions in neurons or in extracts from nervous tissues are examined. Here it is noted that there is a need to consider whether these lipid phase transitions happen within normal physiological conditions or not. Third, and finally, the advocates for the soliton/wave-AP model have adopted a thermodynamic/theory-based philosophical approach in their studies. It is argued that this philosophical approach is a radical departure from the philosophical approach used under the scientific method. The features of this new approach, and implications its use, are examined.

Both climate change and anthropogenic activities contribute to the deterioration of terrestrial water resources and ecosystems worldwide. Central Asian endorheic basins are among the most affected regions through both climate and human impacts. Here, we used a digital elevation model, digitized bathymetry maps and Landsat images to estimate the areal water cover extent and volumetric storage changes in small terminal lakes in Burabay National Nature Park (BNNP), located in Northern Central Asia (CA), for the period of 1986 to 2016. Based on the analysis of long-term climatic data from meteorological stations, short-term hydrometeorological network observations, gridded climate datasets (CRU) and global atmospheric reanalysis (ERA Interim), we have evaluated the impacts of historical climatic conditions on the water balance of BNNP lake catchments. We also discuss the future based on regional climate model projections. We attribute the overall decline of BNNP lakes to long-term deficit of water balance with lake evaporation loss exceeding precipitation inputs. Direct anthropogenic water abstraction has a minor importance in water balance. However, the changes in watersheds caused by the expansion of human settlements and roads disrupting water drainage may play a more significant role in lake water storage decline. More precise water resources assessment at the local scale will be facilitated by further development of freely available higher spatial resolution remote sensing products. In addition, the results of this work can be used for the development of lake/reservoir evaporation models driven by remote sensing and atmospheric reanalysis data without the direct use of ground observations.

This paper attempts to alter a prevailing assumption that buildings use energy to an understanding that in fact, people use energy. Therefore, to successfully accelerate the transition to a low-carbon society and economy more emphasis should be on motivating people and increasing their awareness by making them energy conscious building users and therefore active players in the energy transition process. In this context, this paper provides insights from the Horizon 2020 MOBISTYLE project. It demonstrates research and development approaches, highlights the main project objectives, and presents findings of an ethnographic (qualitative) study of users’ habits, practices, and needs. The aim of the project is to motivate behavioural change by raising consumer awareness through the provision of attractive personalized information on user’s energy use, indoor environment and health, all enabled by an integrated information and communication technology (ICT) service. In this context, the anthropological people-centred approach is integrated into the MOBISTYLE approach putting users at the centre of the ICT tools development process. The main quantitative objective of the project is a reduction of energy use for at least 16 % prompted by the provision of combined information and feedback systems on energy, indoor environmental quality (IEQ) and health. The most relevant motivational factors and key performance indicators (KPIs) for encouraging a more energy conscious and healthy lifestyle were defined by means of a people-centred approach, adopting anthropological inquiries in different settings. Information about users’ lifestyles and their needs was collected in focus groups with potential users in five case studies, located in different European Union (EU) countries. Behaviour change is achieved through awareness campaigns, which encourage users to be pro-active about their energy consumption and to simultaneously improve health and well-being.

Climate change threatens water, sanitation and hygiene (WaSH) facilities and services, as these are intimately linked to the water cycle and are vulnerable to changes in the quantity and quality of available water resources. Floods and droughts, which pollute and reduce water delivery respectively, have now become a perennial issue to deal with in the northern regions of the country, including the Bolgatanga Municipality. This study aimed to assess the degree to which climate change adaptation measures are mainstreamed into the WaSH development planning process in Ghana. Stakeholders from government and non-government agencies were interviewed to gain perspectives on the threat of climate change, the inclusion of climate change in WaSH planning and the barriers preventing mainstreaming. In general, despite awareness and concern about climate change, adaptation measures have been regarded to be far away from the immediate concerns of WaSH development planning. Most of the current measures are reactive and respond to environmental issues rather than to climate change stressors. In essence, stakeholders expressed the view that the adaptive capacity of the Municipality was low and that mainstreaming has not yet occurred. Despite the lack of progress, there are great opportunities for mainstreaming climate change adaptation into planning through increasing awareness and capacity, legislative and institutional changes and the development of participatory systems to provide early warning systems and disaster risk analyses that will inform future planning.

Titanium dioxide (TiO₂) micro and nano architectures have been intensively studied in the past years because of many varied applications in environmental, energy conversion, and storage fields, such as heterogeneous catalysis, dye-sensitized solar cells, lithium/sodium ion batteries, lithium-sulfur (Li-S) batteries, and bio-nanotechnology, etc. Especially the surface and interface structures in the TiO₂ structures play important roles in those applications. This mini review article focuses on TiO₂ micro and nano architectures with the prevalent crystal structures (anatase, rutile, brookite, and TiO₂(B)), and summarizes major advances in the surface and interface engineering and applications in environmental and electrochemical applications. We present the principles and growth mechanisms of TiO₂ nanostructures via different strategies, with an emphasis on rational control of the surface and interface structures. We further discuss the applications of TiO₂ micro and nano architectures in photocatalysis, lithium/sodium ion batteries, and Li-S batteries. Throughout the discussion, the relationship between the device performance and the surface structures of TiO₂ micro/nano structures will be highlighted. Then we discuss the phase transitions of TiO₂ nanostructures and possible strategies of improving the phase stability. The review concludes with a perspective on the current challenges and future research directions.

This article presents a decentralized phase-shedding technique for multiphase converters. The usual central digital controller is replaced by identical local controllers forming a daisy-chain structure. Phase-shedding decisions are taken locally based on a local inductor current monitoring and threshold crossing management. This control strategy allows to implement as many phases as desired in a modular manner. In order to handle specific events such as load current inrush or a start-up sequence and to guarantee optimal transient responses, additional functions are included into each local controllers. The inter-cell communication protocol is described, along with necessary design considerations of threshold and timing values. Finally, functional simulations are carried out on a 5-leg 12V/1.2V 60W multiphase converter, which validate the proposed decentralized phase-shedding strategy for a microcontroller power supply implementation.

Mereotopology is a concept rooted in analytical philosophy. The phase-field concept is based on mathematical physics and finds applications in materials engineering. The two concepts seem to be disjoint at a first glance. While mereotopology qualitatively describes static relations between things like x isConnected y (topology) or x isPartOf y (mereology) by first order logic and Boolean algebra, the phase-field concept describes the geometric shape of things and its dynamic evolution by drawing on a scalar field. The geometric shape of any thing is defined by its boundaries to one or more neighboring things. The notion and description of boundaries thus provides a bridge between mereotopology and the phase-field concept. The present article aims to relate phase-field expressions describing boundaries and especially triple junctions to their Boolean counterparts in mereotopology and contact algebra. An introductory overview on mereotopology is followed by an introduction to the phase-field concept already indicating first relations to mereo- topology. Mereotopological axioms and definitions are then discussed in detail from a phase-field perspective. A dedicated section introduces and discusses further notions of the isConnected relation emerging from the phase-field perspective like isSpatiallyConnected, isTemporallyConnected, isPhysicallyConnected, isPathConnected and wasConnected. Such relations introduce dynamics and thus physics into mereotopology as transitions from isDisconnected to isPartOf can be described.

In this work, we focus on investigating electrothermal flow in a rotating electric field (ROT-ETF), with primary attention paid to the horizontal traveling-wave electrothermal (TWET) vortex induced at the center of the electric field. The frequency-dependent flow profiles in the microdevice are analyzed using different heat transfer models. Accordingly, we address in particular the importance of electrode cooling in ROT-ETF as metal electrodes of high thermal conductivity while substrate material of low heat dissipation capability are employed to develop such microfluidic chips. Under this circumstance, cooling of electrode array due to external natural convection on millimeter-scale electrode pads for external wire connection occurs and makes the internal temperature maxima shift from the electrode plane to a bit of distance right above the cross-shaped interelectrode gaps, giving rise to reversal of flow rotation from a typical repulsion-type to attraction-type induction vortex, which is in good accordance with our experimental observations of co-field TWET streaming at frequencies on the order of reciprocal charge relaxation time of the bulk fluid. These results point out a way to make a correct interpretation of out-of-phase electrothermal streaming behavior, which holds great potential for handing high-conductivity analytes in modern microfluidic systems.

The water-rich liquid layer immobilized on the surface of the polar stationary phases is critical to the retention of polar compounds in hydrophilic interaction chromatography (HILIC). Although the presence of the adsorbed water layer has been investigated and confirmed by multiple techniques, there is a lack of quantitative measure that can be easily determined and linked to chromatographic parameters. This study proposes a simple measure termed volume ratio (the ratio of the adsorbed water layer volume and the mobile phase volume) that provides a relative, but quantitative information on the adsorbed water layer and may be linked to the phase ratio. The volume ratio can be easily determined using toluene elution volume. The volume ratio values are measured in 25 polar stationary phases in various mobile phase conditions. In addition to the acetonitrile content in the mobile phase, ammonium acetate concentration in the mobile phase and column temperature also have significant influences on the volume ratio and the adsorbed water layer.

To understand lung damage caused by COVID-19, we deduced two-phase lung damage mechanisms. After the lungs are infected with SARS-CoV-2 virus, the affected lung tissue swells and surface properties of pulmonary capillaries change, resulting in an increased flow resistance of affected capillaries. If a sufficient number of capillaries are affected by the infection, the swelling and increased cell wall adhesion collectively raise pulmonary vascular resistance. The increased vascular resistance further increases the dwell times of WBCs in affected capillaries and nearly capillaries. When pulmonary pressure is sufficiently higher, WBCs are forced to squeeze into interstitial spaces or alveolar spaces when local pressures are higher than what the capillaries can withstand. When more and more WBCs are dynamically retained, the flow resistance of more capillaries rises, pulmonary vascular resistance rises, and pulmonary pressure rises. The rise in the pulmonary pressure in turn results in elevated capillary pressures. When capillary pressures around the alveoli are sufficiently high, they cause interstitial pressures to change from normally negative values to positive values. The positive pressures cause fluid leakage to the alveolar space and thus degrade lung function. Tissue swelling, and occupation of WBCs in interstitial spaces and alveolar spaces further reduce compressible volume, and thus cause further rise in the pulmonary vascular resistance and pulmonary pressure. When the pulmonary pressure has reached a critical point as in the second phase, the blood breaks capillary walls and squeezes through interstitial spaces to reach alveolar spaces, resulting in irreversible lung damages. The available free volume in the thorax cage, organ usable capacities, temperature and humid are expected to have great impacts on degree of lung damages. The free volume in the thorax cage, lung usable surplus capacity, and other organ usable capacities determine the arrival time of last-phase irreversible damage. The mechanisms imply that the top priority for protecting lungs is maintaining pulmonary micro-circulation and preserving organ functions in the entire disease course while controlling viral reproduction should be stressed in the earliest time possible. The mechanisms also explain leukecytes are recruited and migrated into inflamed tissues by increasing their dwell times caused by increased local flow resistance.

This study compared two object-oriented land use change detection methods—detection after classification (DAC) and classification after detection (CAD) —based on a digital elevation model, slope data, and multi-temporal Landsat images (TM image for 2000 and ETM image for 2010). We noted that the overall accuracy of the DAC (86.42%) was much higher than that of the CAD (71.71%). However, a slight difference between the accuracies of the two methods exists for deciduous broadleaf forest, evergreen coniferous forest, mixed wood, upland, paddy, reserved land, and settlement. Owing to substantial spectrum differences, these land use types can be extracted using spectral indexes. The accuracy of DAC was much higher than that of CAD for industrial land, traffic land, green shrub, reservoir, lake, river, and channel, all of which share similar spectrums. The discrepancy was mainly because DAC can completely utilize various forms of information apart from spectrum information during a two-stage classification. In addition, the change-area boundary was not limited at first, but was adjustable in the process of classification. DAC can overcome smoothing effects to a great extent using multi-scale segmentations and multi-characters in detection. Although DAC yielded better results, it was more time-consuming (28 days) because it uses a two-stage classification approach. Conversely, CAD consumed less time (15 days). Thus, a hybrid of the two methods is recommended for application in land use change detection.

Forest degradation is known to be widespread in the tropics, but is currently very poorly mapped, in part because there is little quantitative data on which satellite sensor characteristics and analysis methods are best at detecting it. To improve this, we used data from the Tropical Forest Degradation Experiment (FODEX) plots in the southern Peruvian Amazon, where different numbers of trees had been removed from four 1 ha forest plots, carefully inventoried by hand and Terrestrial Laser Scanning before and after the logging to give a range of biomass change (ΔAGB) values. We conducted a comparative study of six multispectral optical satellite sensors (WorldView-3, SkySat, SPOT-7, PlanetScope, Sentinel-2 and Landsat 8) at 0.3 – 30 m spatial resolution, to find the best combination of sensor and remote sensing indicator for change detection. Spectral reflectance, the Normalized Difference Vegetation Index (NDVI) and texture parameters were extracted after radiometric calibration and image preprocessing. The strength of the relationships between the change in these values and field-measured ΔAGB (computed in % ha−1) was analysed. The results demonstrate that: (a) texture measures correlates more with ΔAGB than simple spectral parameters; (b) the strongest correlations are achieved for those sensors with spatial resolutions in the intermediate range (1.5 - 10 m), with finer or coarser resolutions producing worse results, and (c) when texture is computed using a moving square window ranging between 9 - 14 m in length. Maps predicting ΔAGB showed very promising results using a NIR-derived texture parameter for 3 m resolution PlanetScope (R2 = 0.97 and RMSE = 1.80 % ha−1), followed by 1.5 m SPOT-7 (R2 = 0.74 and RMSE = 5.25 % ha−1) and 10 m Sentinel-2 (R2 = 0.71 and RMSE = 5.55 % ha−1). Texture models derived from 0.3 m WorldView-3 improved with increasing window size, with highest R2 of 0.62 and RMSE = 6.35 % ha−1 for a window of 14 m in length. The degradation in our field plots is invisible to the 30 m resolution Landsat data. Our findings imply that, at least for lowland Peru, low-medium intensity disturbance can be detected best in optical wavelengths using a texture measure derived from 3 m PlanetScope data. That such data are being collected daily, and currently released free as monthly mosaics over tropical forests as part of the Norway’s International Climate and Forest Initiative (NICFI), is excellent news for monitoring such degradation.

Future projections from climate models and recent studies shows impact of climate change on rainfall indices estimation. This study assesses the simulations of rainfall indices based on the Coupled Model Intercomparison Project CMIP5 and CMIP3 in the some of subbasin Hamedan Province West of Iran. The analysis of the rainfall indices are: simple rainfall intensity, very heavy rainfall days, maximum one-day rainfall and rainfall frequency has been carried out in this study to evaluating the impact of climate change on rainfall indices events. Relative change in three rainfall indices is investigated by GCMs under various greenhouse gas emission scenarious A1B and B1 and RCP8.5, RCP8.5 scenarios for the future periods 2020–2045 and 2045-2065. The final results show that each of rainfall indices differs in stations under the three GCMs model (GIAOM, MIHR, MPEH5) and emission scenarios A1B and B1, and RCP2.5, RCP8.5 scenarios. Relative change of daily intensity index varies from -9.93% - 25%, very heavy rainfall days 20.71% - 25.9% and yearly rainfall depth -15.71% - 13% can be observed at study area in 50y for future periods (2046–2065). Rainfall indices of sum wet days, nday >1mm and maximum one-day rainfall are projected to decrease under the senariuos B1,A1B and sum wet days, simple daily intensity and heavy Rainfall days>10 projected to decrease under the RCP2.6.

The main objective of this communication is to describe the ‘Global Salt Cycle’. Giant salt accumulations are commonly found along continental margins of former rifts. The first stage in the accumulation process is saturation of newly formed oceanic crust with seawater. Final mobilisation and accumulation of the salts occurs during rifting, localised in the vicinity of relict subduction zones. Oceanic crust is created along the spreading ridges in the deep oceans of the Earth. It exchanges mass and energy with seawater in hydrothermal circulation cells that penetrate deep into the new and fractured crust. Water-rock interactions include the formation of hydrated and hydroxylated minerals, e.g., serpentinites and clay minerals. By incorporating hydroxyl groups and water in their crystal lattices, the salinity of remaining brines increases. Subduction of oceanic crust and serpentinised lithosphere transports water, hydrated minerals, and marine salts deep into the crust and mantle. Upon pressurisation and heating of the subducting slab, different parts of this water are expelled at different depths/temperatures. The resulting fluids will contain salts brought in with the slab, as well as new salts formed by water-rock interaction. The combination of elevated pressures and temperatures, water, salinity, and CO2, create permeability in the normally impermeable, peridotitic mantle, by altering the fluid-rock dihedral angles of mineral grains. This P/T-determined intergranular permeability allows ascent of saline fluids, under lithostatic pressure, within the mantle wedge, or the slab itself. The fluids produce a mechanically weakened and buoyant zone within the mantle wedge due to high pore pressure between mineral grains and reduced mantle density. During the lifetime of a subduction zone, a substantial accumulation of saline fluids within the mantle wedge and crust, is evident. Deep, fluid reservoirs accumulate between the subduction trench and the volcanic front. They may exist for hundreds of millions of years, even after the extinction of the subduction zone. Saline fluids may escape to the surface along deep faults, due to overfilling of available pores/fractures. Fluids within the mantle wedge may form rock melts or exist as supercritical, mineral rich fluids. The combination of reduced pressure due to rifting, and a saline and buoyant mantle, creates a mantle circulation that brings the accumulated, saline fluids, to crustal levels. Salts will therefore accumulate during initial stages of rifting as a result of massive fluid expulsion, phase change and boiling of mantle fluids. No extra energy is required to produce phase change and boiling. The result is formation of solid salts or dense brines/slurries invading fractured crustal rocks, or escaping to the surface/seabed. This process may take place both before and after the sea has invaded a continental rift.

This paper reports a novel fabric phase sorptive extraction-high performance liquid chromatography-ultra violet detection (FPSE-HPLC-UV) method for the simultaneous extraction and analysis of four phenyltin derivatives that include triphenyltin hydroxide, triphenyltin acetate, triphenyltin chloride and tetraphenyltin in environmental water (agricultural waste water and municipal waste water) and canned food samples. The selected analytes were well resolved by Waters Nova pack C18 column (3.9 x 150 mm, 4 µm particle size) in isocratic elution mode within 15 minutes. The new microextraction media has been analytically evaluated using phenyltin derivatives as model compounds. The factors affecting the extraction efficiency of FPSE have been evaluated and the optimum extraction conditions were determined. Under these optimum conditions, the limits of detection (LODs) for sol-gel C18 coated fabric phase sorptive extraction (FPSE) media in combination with HPLC-UV for the analysis of the phenyltin derivatives were in the range of 10-100 ng/mL with high precision (low relative standard deviation) at 10 ng/mL concentration with good absolute recoveries. To the best of our knowledge, this is the first FPSE extraction procedure applied to environmental water and canned food samples for the simultaneous determination of phenyltin derivatives and could be readily adopted as a rapid and robust green analytical tool for routine environmental and food analytical laboratories.

Spatio-temporal Land-Use and Land-Cover (LULC) changes have been affecting geo-environmental and climate change globally. This study aims to analyze LULC changes in Bahir Dar city and its surrounds. Landsat 5 TM (1987), Landsat 7 ETM+ (2002) and Landsat 8 OLI (2017) and SPOT images, and aerial photographs, master plan map and Google Earth Landsat images were used to analyze changes. In Bahir Dar city and its surrounds, LULC has been changing in space and time. During 1987-2017, more than 50% of the study area was covered with cropland. Settlement areas have increased from 3.3% in 1987 to 9.13% in 2017. However, wetland vegetation, shrubland, grassland, forest, and waterbodies have degraded. These changes are mainly attributed to population growth and its effect on the environment. Land-use and land-cover is a serious problem and it causes land and environmental degradation, climate change and loss of the biological environment.

Human adaptive responses to climate change occur at the local level, where climatic variability is experienced. Therefore analyzing vulnerability at the local level is important in planning effective adaptation options in a semi-arid environment. This study was conducted to assess vulnerability of Maasai pastoralist communities in Kajiado County, Kenya to climate change by generating vulnerability index for the communities. Data was collected using questionnaires that were administered to 305 households in the five different administrative wards (Oloosirkon/Sholinke, Kitengela, Kapetui North, Kenyawa-Poka and Ilmaroro) in Kajiado East. Vulnerability was measured as the net effect of adaptive capacity, sensitivity and exposure to climate change. Principal Component Analysis (PCA) was used to assign weights to the vulnerability indicators used for the study and also to calculate the household vulnerability index. A vulnerability map was produced using the GIS software package ArcGIS 10.2. Results showed that gender of household head, age of household head, educational level, access to extension agents, herd size, livestock diversity and access to credit facility influenced vulnerability of the Maasai pastoralists to climate change in Kajiado East. The result showed that the most vulnerable communities with the highest negative vulnerability index value are Ilpolosat (-2.31), Oloosirikon (-2.22), Lenihani (-2.05), Konza (-1.81) and Oloshaiki (-1.53). The communities with the highest positive vulnerability index values were Kekayaya (4.02), Kepiro (3.47), Omoyi (2.81), Esilanke (2.23), Kisaju (2.16) and Olmerui (2.15). We conclude that provision of basic amenities such as good roads and electricity; access to extension agents, access to credit facilities and herd mobility will reduce vulnerability of Maasai pastoralists in Kajiado east to climate change and variability.

The manuscript wants to investigate the debate on urban resilience and climate change linking theory and practice, describing the possible innovations that concern urban design, urban normative and regional laws developing in different countries. The approach pursued would encourage resilience and flood protection through smart planning and through the architectural and urban project; considering public space as strategic soil where developing the resilient city, using engineering technical climate defence as new space for citizens and communities. Resilience themes are included in all levels of government and in spatial and strategic development policies such as in some project concerning public and private space and in municipal plans; the urban defense structures has to become new pleasant space for the city; these actions will not only contribute to making cities more resilient but will contribute to the creation of a more pleasant and attractive urban environment. The Resilience is the main keyword of some strategic vision of the Netherlands and of Italian laws and the concept is tested in some best practice such as in Rotterdam, in Bordeaux, in London and in the research carried out by "Arquitectos de Cabecera" in Barcelona. Resilience is seen as a new paradigm of smart planning.

To remain competitive in the current market, an enterprise must differentiate itself based on higher value propositions. For this purpose, since improving the product or service performance can reach some limits, one potential solution is to move towards new combinations of products and services. This evolution, called servitization, leads to the generation of Product-Service Systems (PSS). Servitization requires not only a clear understanding of enterprise core business but also a clear vision on the prevailing trends and challenges of PSS development from both business and technological points of view. In addition, the evolution path should be aligned with the enterprise strategy. This paper first highlights the notion of symbiotic PSS where Product Systems and Service Systems, and their stakeholders, interoperate seamlessly based on a win-win approach. Then it proposes a PSS Conceptual Framework (PSS-CF) which can be applied in the early stages of servitization to increase the understating of PSS dimensions and to facilitate the prioritization of the servitization investments. The framework dimensions were discussed in several iterations, from both academic and industrial points of view, in the frame of a European research project. Moreover, the applicability of the framework was studied in four different industrial Use-Cases.

Climate projections show that southern Indonesia such as West Nusa Tenggara is projected to experience a lower precipitation and higher temperatures. To date, research on climate change impact on Indonesian rice production yield is limited. As climate change is projected to decrease rainfall and to increase temperatures, this paper offers a qualitative analysis using system archetypes to understand the impacts of climate change on rice production. Two system archetypes are identified including Limits to Growth and Success to Successful. Both archetypes explain that rice production is hampered by high minimum temperature as photosynthesis output is decreased by increasing respiration. This paper shows that using a simple tool, system archetypes, we can describe the impacts of climate change on rice production. The outputs of this study such as a causal loop diagram and system archetypes can be a basis to develop a simulation model in understanding the impacts of climate change on main crops.

2017 was an excellent year in terms of new drugs (chemical entities and biologics) approved by the FDA, with a total of forty-six. In turn, one of the highlights was the number of peptides (six) included in this list. Here, the six peptides are analysed in terms of chemical structure, synthetic strategy used for their production, source, biological target, and mode of action.

An opinion dependent cross sectional survey was conducted among charland peoples of Noakhali, Bangladesh with a view to identify the factors that affect green economy. Nijhumdwip Island and Tamaruddi union are highly affected by cyclone and soil salinity. Unpredictable rainfall is the most acute in Nijhumdwip. Lack of information the main problem in Nijhumdwip Island. Farmers are found less interest in integrated farming and crop diversification. Few farmers from Sonadia Union are involved in homestead gardening. Regression analysis have shown a negative relationship (p<0.001) between education of stockholders and decrease of crop production. On the other hand education level of stockholders is to be found positively (p<0.05) varied with decrease of food insecurity. So it can be said that educated farmers are more adaptive against climate change.

A scenario-based approach to the impacts of land use and climate change can help in identifying future policy directions. This study models the impacts of different land use and climate change scenarios on the forest ecosystems of South Korea to identify national-scale forest policy options. Climatically suitable forest areas for 1,031 climate vulnerable plant species were identified for current time and for 2050. We calculated change in species richness under four climate projections. We built forest conversion models and created four 2050 forest scenarios: (1) forest loss continues at current rates; (2) similar loss, but with conservation in areas with suitable future climates; (3) a reduction of loss by 50%; and (4) a combination of preservation and overall reduction of loss by 50%. We then crossed the forest conversion models with the climate-driven change in species richness, and categorized current forest areas into four classes to offer forest policy alternatives. By deploying the scenarios which preserve climatically suitable forests, the average species richness where forests converting to other land uses reduced significantly. We suggest conserving forests with suitable climates for biodiversity conservation and the establishment of forest plantations targeted to areas where species richness will decline based on our results.

Zinc oxide (ZnO) nanostructures have been studied extensively in the past years due to the novel electronic, photonic, mechanical and electrochemical properties. Recently, more attention has been paid to assemble nanoscale building blocks into three dimensional (3D) complex hierarchical structures, which not only inherit the excellent properties of the single building blocks but also provide potential applications in the bottom-up fabrication of functional devices. This review article focuses on 3D ZnO hierarchical nanostructures, and summarizes major advances in the solution phase synthesis, applications in environment, and electrical/electrochemical devices. We present the principles and growth mechanisms of ZnO nanostructures via different solution methods, with an emphasis on rational control of the morphology and assembly. We then discuss the applications of 3D ZnO hierarchical nanostructures in photocatalysis, field emission, electrochemical sensor, and lithium ion batteries. Throughout the discussion, the relationship between the device performance and the microstructures of 3D ZnO hierarchical nanostructures will be highlighted. This review concludes with a personal perspective on the current challenges and future researches.

The climate of Bangladesh has changed drastically which may put considerable adverse impacts on mangrove fishers but very few studies focused on this professional group. An attempt was made to perceive the impact and adaptation measures of the Sundarbans mangrove resource users, employing interviews and focus group discussions. A total of 150 respondents were randomly selected from the Sundarbans west under Shyamnagar Upazila of Satkhira District. It was revealed that the abundance of fishes, fuel woods, honey, golpata (Nypa fruticans), and shrimp post-larvae (PL) was reduced considerably. The resource users have adapted themselves by changing their occupation and becoming jobless and depending on the other family members. PL collection, honey collection, shrimp culture, and wood collection were found professional adapting strategies to adopt cyclone, flood, salinity intrusion, river erosion, and drought. Several recommendations are elicited, the implementation of which is important to ensure livelihood sustainability of the mangrove communities.

Civic engagement refers to the ways in which citizens participate in the life of a community to help shape its future or improve conditions for others. While it might have been shaped by the COVID-19 pandemic recovery, this study explored how college students perceive civic engagement on selected campuses that were partially locked down. We sampled 1036 student volunteers from six universities in Taiwan by using a self-designed module of civic engagement and transferable capabilities. The Student’s t-test, ANOVA, regression, factor analysis, and structural equation modeling (SEM) were used to interpret the differences and relationships among these variables. This study provides a more detailed example of the current status of civic engagement and its relative to transferable capabilities in a higher education setting. The related programs and institutes should take responsibility for enhancing students’ civic engagement and transferable capabilities during the pandemic. How to ameliorate the situation? The findings suggest that it should consider a student’s academic major, learning experiences in the department, and time spent on related activities during the pandemic recovery. The findings might prove useful to various campuses for enhancing ongoing practices.

Energy is a fundamental ingredient in economic development and energy consumption is an index of prosperity and the standard of living. The consumption of energy has increased significantly in the last number of decades, as the standard of living has improved. Renewable energy is a sustainable and clean source of energy derived from nature. Renewable energy technology is one of the solutions, which produces energy by transforming natural resources into useful energy forms. When you do something for the first time in the world, you never attain a perfect product or solution from the start. In Central Greece Lamia city, we are the first to design and implement an off-grid energy system using hydrogen energy storage technology and phase change materials for a house residence. The action plan for energy efficiency, a series of directives and incentive mechanisms, mandatory energy certification of buildings, indicate the urgent need to reduce energy consumption in buildings, which results in a more comfortable living, long service life of buildings, which in turn preserves the environment.

We examine the mass balance of the glaciers in the Novaya Zemlya Archipelago, located in the Russian High Arctic using time series of time-variable gravity from the NASA/DLR Gravity Recovery and Climate Experiment (GRACE) mission, laser altimetry data from the NASA Ice Cloud and land Elevation Satellite (ICESat) mission, and radar altimetry data from the ESA CryoSat-2 mission. We present a new algorithm for detecting changes in glacier elevation from these satellite altimetry data and evaluate its performance in the case Novaya Zemlya by comparing the results with GRACE. We find that the mass loss of Novaya Zemlya increased from 10±5 Gt/yr over 2003-2009 to 14±4 Gt/yr over 2010-2016, with a brief period of near mass balance between 2009 and 2011. The results are consistent across the gravimetric and altimetric methods. Furthermore, the analysis of elevation change from CryoSat-2 indicates that 60\% of the mass loss occurs at low elevation, where thinning rates are highest. We also find that marine-terminating glaciers in Novaya Zemlya are thinning significantly faster than land-terminating glaciers, which indicates an important role of ice dynamics of marine-terminating glaciers. We posit that the glacier changes have been caused by changes in atmospheric and ocean temperatures. We find that the increase in mass loss after 2010 is associated with a warming in air temperatures, which increased the surface melt rates. There is no enough information on the ocean temperature at the front of the glaciers to conclude on the role of the ocean, but we posit that the temperature of subsurface ocean waters must have increased during the observation period.

Self-assembly membranes, composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC), were characterized at the total lipid concentration below 20 mM. The sizes of the assemblies varied depending on the molar ratio of DMPC and DHPC (q = [DMPC]/[DHPC]). The small assemblies with diameter of ca. 10 nm were formed at q ≤ 2.0 at 20 ºC (below phase transition temperature of DMPC). The physicochemical membrane properties were then studied using fluorescence probes, 1,6-diphenyl-1,3,5-hexatriene and 6-dodecanoyl-N,N-dimethyl-2-naphthylamine, upon the dilution. DHPC micelle showed a higher membrane fluidity, while the DMPC/DHPC membranes at q ≥ 0.5 showed lower membrane fluidities as well as DMPC vesicle in gel (ordered) phase. Upon dilution, the ordered membrane properties were maintained while the solution turbidities increased, implying the morphological change of the self-assembly, bicelle to the vesicle in gel phase. Based on the obtained results, a phase diagram of DMPC/DHPC binary system (at 20 ºC) is described: (i) the bicelle suspension is transparent and the membrane is in ordered state, (ii) the micelle suspension is transparent and the membrane is in disordered state, (iii) the vesicle suspension is turbid and the membrane is in ordered state.

Lake Chapala is a natural ecosystem of Mexico, declared Ramsar site, currently, is an area with importance in the agricultural sector, tourism, and important source of drinking water in the Metropolitan area of Guadalajara, considered as a thermo regulatory body. This study used tools such as Rhtest, as well as analyzing extreme climate indices using RClimdex. In addition, the relationship with the change in water surface of Lake Chapala was assessed through the NDWI index, using Landsat images, between 1985 and 2018. According to the obtained results, the signs of climatic variability are detected in the study region, which, directly affects the basin runoff and water levels in the lake, as well as, the factor of water overexploitation in the basin, so it is considered that the lake conditions mostly depend on the type of management that is given to the resource. Finally, the results will help the understanding of climate variability and its water resources influence of the Lerma Chapala basin, which will assist in future research.

Building more energy efficient and sustainable urban areas that will both mitigate the effect of climate change and adapt for the future climate, requires the development new tools and methods that can help urban planners, architect and communities achieve this goal. In the current study, we designed a workflow that links different methodologies developed separately, to derive the energy consumption of a university school campus for the future. Three different scenarios for typical future years (2039, 2069, 2099) were run as well as a renovation scenario (Minergie-P). We analyse the impact of climate change on the heating and cooling demand of the buildings and determined the relevance of the accounting of the local climate in this particular context. The results from the simulations showed that in the future there will a constant decrease in the heating demand while for the cooling demand there will be a significant increase. It was further demonstrated that when the local climate was taken into account there was an even higher rise in the cooling demand but also that the proposed renovations were not sufficient to design resilient buildings. We then discuss the implication of this work on the simulation of building energy consumption at the neighbourhood scale and the impact of future local climate on energy system design. We finally give a few perspective regarding improved urban design and possible pathways for the future urban areas.

Global change is affecting vegetation cover and processes through multiple pathways. Long time series of surface land surface properties derived from satellite remote sensing offer a unique abilities to observe these changes, particularly in areas with complex topography and limited research infrastructure. Here, we focus on Nepal, a biodiversity hotspot where vegetation productivity is limited by moisture availability (dominated by a summer monsoon) at lower elevations and by temperature at high elevations. We analyze normalized difference vegetation index (NDVI) from 1981 to 2015 semimonthly, at 8 km spatial resolution. We use a random forest (RF) of regression trees to generate a statistical model of NDVI as a function of elevation, land use, CO2 level, temperature, and precipitation. We find that NDVI has increased over the studied period, particularly at low and middle elevations and during fall (post-monsoon). We infer from the fitted RF model that the NDVI linear trend is primarily due to CO2 level (or another environmental parameter that is changing quasi-linearly), and not primarily to temperature or precipitation trends. On the other hand, interannual fluctuation in NDVI is more correlated with temperature and precipitation. RF accurately fits the available data and shows promise for estimating trends and testing hypotheses about their causes.

The implementation of One Health/EcoHealth/Planetary Health approaches has been identified as key (i) to address the strong interconnections between risk for pandemics, climate change and biodiversity loss, and (ii) to develop and implement solutions to these interlinked crises. As a response to the multiple calls of scientists in that direction, we have put forward seven long term research questions regarding COVID-19 and emerging infectious diseases (EIDs) that are based on an effective integration of environmental, ecological, evolutionary, and social sciences to better anticipate and mitigate EIDs. Research needs cover the social-ecology of infectious disease agents, their evolution, the determinants of susceptibility of humans and animals to infections, and the human and ecological factors accelerating infectious disease emergence. For comprehensive investigation, they include the development of nature-based solutions to interlinked global planetary crises, addressing ethical and philosophical questions regarding the relationship of humans to nature and regarding transformative changes to safeguard the environment and human health. In support of this research, we propose the implementation of innovative multidisciplinary facilities embedded in social-ecosystems locally: the “ecological health observatories” and the “living laboratories”. This work has been carried out in the frame of the EC project HERA (www.HERAresearchEU.eu) that aims to set the priorities for an environment, climate and health research agenda in the EU by adopting a systemic approach in the face of global environmental change.

Building envelope can play a crucial role in building improvement efficiency and the adoption of Phase Change Materials (PCMs) coupled with transparent elements may (i) allow a better control of the heat flows from/to the outdoor environment, (ii) increase the exploitation of solar energy at building scale and (iii) modulate the light transmission to avoid glare effects. Starting from a literature review of experimental works, this research identifies the main possible integration of PCM in transparent/translucent building envelope components (in glazing, in shutters and in multilayer façade system) drawing a global picture potentials and limitations of these technologies. Transparent envelopes with PCMs have been classified from the simplest “zero” technology, which integrates the PCM into the double glass unit (DGU), to more complex solutions – with different numbers of cavities of the glass (TGU), different position of PCM layer (internal/external shutter), and in combination with other materials (TIM, aerogel, prismatic solar reflector, PCM curtain controlled by an electric pump). The results of the analysis are resumed in a SWOT (strengths, weakness, opportunities and threats) analysis table to underline strengths and weaknesses of transparent building envelope components with PCMs, and to indicate opportunities and threats for future research and building application.

Unmanned aerial vehicles (UAV) provide an unprecedented capacity to monitor the development and dynamics of tree growth and structure through time. It is generally thought that the pruning of tree crops encourages new growth, has a positive effect on fruiting, makes fruit-picking easier, and may increase yield, as it increases light interception and tree crown surface area. To establish the response of pruning in an orchard of lychee trees, an assessment of changes in tree structure, i.e. tree crown perimeter, width, height, area and Plant Projective Cover (PPC), was undertaken using multi-spectral UAV imagery collected before and after a pruning event. While tree crown perimeter, width and area could be derived directly from the delineated tree crowns, height was estimated from a produced canopy height model and PPC was most accurately predicted based on the NIR band. Pre- and post-pruning results showed significant differences in all measured tree structural parameters, including an average decrease in tree crown perimeter of 1.94 m, tree crown width of 0.57 m, tree crown height of 0.62 m, tree crown area of 3.5 m², and PPC of 14.8%. In order to provide guidance on data collection protocols for orchard management, the impact of flying height variations was also examined, offering some insight into the influence of scale and the scalability of this UAV based approach for larger orchards. The different flying heights (i.e. 30, 50 and 70 m) produced similar measurements of tree crown width and PPC, while tree crown perimeter, area and height measurements decreased with increasing flying height. Overall, these results illustrate that routine collection of multi-spectral UAV imagery can provide a means of assessing pruning effects on changes in tree structure in commercial orchards, and highlight the importance of collecting imagery with consistent flight configurations, as varying flying heights may cause changes to tree structural measurements.

New energy vehicles (NEVs) have been proposed as a promising technology to reduce greenhouse gas (GHG) emissions. China is one of the leading countries in the development of NEVs, and a wide range of companies, including large and smaller businesses, are involved in the Chinese NEV market. Given that the NEV market involves the creation of nascent technologies, there are significant barriers to the development of NEV companies in the business growth stage. This is particularly significant in the case of small and medium-sized enterprises (SMEs). This study surveyed 100 NEV SMEs in China using a structured questionnaire to determine the most significant barriers to the growth of their businesses. Calculating the relative importance index (RII) from the collected questionnaire responses revealed that the most significant barrier at the growth stage is the lack of skilled scientists in China. The most important category of barriers is legal and institutional barriers, which suggests that government intervention in business activities, taxes, and unclear regulations are viewed by entrepreneurs as a serous hindrance to further development in the NEV industry.

This paper studied the nonlinear vibrations of top tensioned cantilevered pipes conveying pressurized steady two-phase flow under thermal loading. The coupled axial and transverse governing partial differential equations of motion of the system were derived based on Hamilton’s mechanics with the centreline assumed to be extensible. Multiple scale perturbation method was used to resolve the governing equations, which resulted to an analytical approach for assessing the natural frequency, mode shape and the nonlinear coupled axial and transverse steady state response of the pipe. The analytical assessment reveals that at some frequencies the system is uncoupled, while at some frequencies a 1:2 coupling exists between the axial and the transverse frequencies of the pipe. Nonlinear frequencies versus the amplitude displacement of the cantilever pipe conveying two-phase flow at super critical mixture velocity for the uncoupled scenario exhibit a nonlinear hardening behaviour, an increment in the void fractions of the two-phase flow resulted to a reduction in the pipe’s transverse vibration frequencies and the coupled amplitude of the system. However, increasing the temperature difference, pressure and the presence of top tension were observed to increase the pipe’s transverse vibration frequencies without a significant change in the coupled amplitude of the system.

In this research, atomistic molecular dynamics simulations are combined with mesoscopic phase-field computational methods in order to investigate phase-transformation in polycrystalline Aluminum microstructure. In fact, microstructural computational modeling of engineering materials could help to optimize their mechanical properties for industrial applications (e.g. directional solidification for turbine blades). As a result, a multiscale modeling approach is developed to find a relation between manufacturing variables (e.g. temperature) and microstructural properties of crystalline materials (e.g. grain size), which could be used to develop an advanced manufacturing process for sensitive applications. The results show that atomistic modeling of grain growth could be used as a first-principle approach in order to study phase transformation's kinetics, which could capture morphology of polycrystalline materials more accurately. On the other hand, phase-field mesoscopic approach needs less computational efforts, but still it relies on semi-empirical data to capture accurate phase transformation regimes, which makes this approach suitable for rapid examining of new manufacturing conditions as well as its effects on microstructural properties of polycrystalline materials.

Farming systems prevalent in sub-Saharan Africa are exposed and vulnerable to climate change due to their high dependence on rainfall. However, most studies have only estimated the impacts of climate change on agricultural productivity at a regional or national level. We add to this literature by focussing on the sub-national impacts. This study uses 30 years (1981–2011) of yield and weather data in Zambia and applies the Just and Pope model to determine how rainfall and temperature affect yield and yield variability of maize and beans at the national and subnational levels. Results show a negative impact of temperature rise on yield and a positive impact of rainfall rise on yield, above the current mean levels. These results differ by agro-ecological region. Worst-case-scenario predicted impacts using HadGEM-ES2 global circulation model show that major yield decreases (25% for maize and 34% for beans) by 2050 will be in region II and will be driven mainly by temperature increase offsetting the positive gains from rainfall increase. The model mainly under-predicts yield for maize and overpredicts yield for beans. These findings call for agro-ecological region-specific adaptation strategies and well-planned policy interventions to make agriculture more resilient to climate change.

Wetlands are one of the crucial natural resources. They provide invaluable biodiversity resources, aid in water quality improvement, support ground water recharge, help in moderating climate change and support flood control. Environment is in the other hand, where we live and something, we are very familiar with our day to day life. Geographic Information Systems (GIS), Remote Sensing and Global Positioning System (GPS) were a useful tool for wetland and environmental change analysis and to improve on the classification accuracy. This study investigates population and environmental change of Jarmet wetland and its surrounding area change analysis over the period of 1972 to 2015. The purpose of this study was to show land use/ land cover change of Jarmet wetland and its surrounding environment over years as a response to population growth. For this purpose, multi-temporal satellite imageries (Landsat MSS 1972, TM1986, ETM+ 2000, 2005 and 2015 and SRTM 2000) were obtained and used for LULC change analysis, elevation analysis and change detection analysis. ERDAS Imagine 2015, ARC GIS 10.5.1, Global Mapper11, ENVI 5.0 and DNR Garmin softwares were used to process the image data and accuracy assessment analysis. The result of LULC showed that there is spatial reduction in wetland, forest, Shrubland and grassland in the period of 43 years (1972-2015) by -1,722.8 ha, -296.2 ha, -1,718.7 ha and -661.9 ha respectively, due to increase in the farmland and plantation area as a response to overpopulation, lack of environmental policy implementation and irresponsible for natural resource degradation. The accuracy assessment of LULC change are done for recent satellite image showed the overall accuracy of 84.06% with Kappa index 75.19% this means this classification is accurately classified and handle greater than 75% of error. Finally, this study suggests that create strictly natural resource conservation law, stopping illegal expansion of farmland, educating society about the value of natural resource especially wetland and create a source of income for society rather than farming.

The interest in renewable energy to replace fossil fuel is increasing as the problem caused by climate change become more severe. Small hydropower (SHP) is evaluated as a resource with high development value because of its high energy density compared to other renewable energy sources. SHP may be an attractive and sustainable power generation environmental perspective because of its potential to be found in small rivers and streams. The power generation potential could be estimated based on the discharge in the river basin. Since the river discharge depends on the climate conditions, the hydropower generation potential changes sensitively according to climate variability. Therefore, it is necessary to analyze the SHP potential in consideration of future climate change. In this study, the future prospect of SHP potential is simulated for the period of 2021 to 2100 considering the climate change in three hydropower plants of Deoksong, Hanseok, and Socheon stations, Korea. As the results, SHP potential for the near future (2021 to 2040) shows a tendency to be increased and the highest increase is 23.4% at the Deoksong SPH plant. Through the result of future prospect, we have shown that hydroelectric power generation capacity or SHP potential will be increased in the future. Therefore, we believe that it is necessary to revitalize the development of SHP in order to expand the use of renewable energy. Also, a methodology presented in this study could be used for the future prospect of the small hydropower potential.

Crop domestication and breeding considerably increased productivity over centuries, but simultaneously involved unconscious selection against ‘selfish plant behavior’. Paradoxically, modern-day crop breeding largely enhances individual plant-fitness. As agriculture relies on community performance, embracing an “Agroecological Genetics and Genomics” viewpoint might maximize communal yield by matching crop genotypes to target environments.

What are relevant levels of description when investigating human language? How are these levels connected to each other? Does one description yield smoothly into the next one such that different models lie naturally along a hierarchy containing each other? Or, instead, are there sharp transitions between one description and the next, such that to gain a little bit accuracy it is necessary to change our framework radically? Do different levels describe the same linguistic aspects with increasing (or decreasing) accuracy? Historically, answers to these questions were guided by intuition and resulted in subfields of study, from phonetics to syntax and semantics. Need for research at each level is acknowledged, but seldom are these different aspects brought together (with notable exceptions). Here we propose a methodology to inspect empirical corpora systematically, and to extract from them, blindly, relevant phenomenological scales and interactions between them. Our methodology is rigorously grounded in information theory, multi-objective optimization, and statistical physics. Salient levels of linguistic description are readily interpretable in terms of energies, entropies, phase transitions, or criticality. Our results suggest a critical point in the description of human language, indicating that several complementary models are simultaneously necessary (and unavoidable) to describe it.

This research analyzes the Physical Education students’ degree of academic performance with the incorporation of active methodologies, specifically the flipped classroom mixed learning, restricted to evaluation periods in the months of June and September. The study focuses on whether there are significant differences in this variable through the scores obtained. Through a simple random sampling, 131 students participated in this empiric-analytic research, using an ex-post-facto study with a retrospective design with quasi control group. A robust test of averages comparison, multiple linear regressions and an evaluation of the relative importance of predictors is conducted. The results show how flipped classroom methodology linearly and positively influences academic performance and correlationally motivation and support. As main conclusion, in a hybrid and digitalized learning context, the value of the consideration of active methodologies (flipped classroom) based on emerging pedagogies, allows improving students’ achievement and competence development, providing critical, significant, ubiquitous, transformational and especially motivating experiences.

PirAB is a binary protein complex secreted by specific strains of Vibrio parahaemolyticus (Vp) that harbor the pVA1 virulence plasmid and express PirAVp and PirBVp toxins. PirABVp causes acute hepatopancreatic necrosis disease (AHPND), a newly emergent penaeid shrimp disease that can cause 70–100% mortality and has resulted in great economic losses since its appearance. The cy-totoxic effect of PirABVp on the epithelial cell of the shrimp hepatopancreas has been extensively reported. Our studies found that the PirBVp subunit has lectin activity and recognizes mucin-like O-glycosidic structures in the shrimp hepatopancreas. The PirAVp subunit may have a stabiliza-tion function of the binary complex. However, we also found that Vp AHPND changes the water microbiota community structure and causes a significant reduction in several bacteria, especially Neptuniibacter spp. We propose that the PirABvp toxin could exhibit a dual role: damage the shrimp hepatopancreas and kill surrounding bacteria.

Sequential hypothesis test and change-point detection when the distribution parameters are unknown is a fundamental problem in statistics and machine learning. We show that for such problems, detection procedures based on sequential likelihood ratios with simple one-sample update estimates such as online mirror descent are nearly second-order optimal. This means that the upper bound for the algorithm performance meets the lower bound asymptotically up to a log-log factor in the false-alarm rate when it tends to zero. This is a blessing, since although the generalized likelihood ratio (GLR) statistics are optimal theoretically, but they cannot be computed recursively, and their exact computation usually requires infinite memory of historical data. We prove the nearly second-order optimality by making a connection between sequential analysis and online convex optimization and leveraging the logarithmic regret bound property of online mirror descent algorithm. Numerical and real data examples validate our theory.

During disaster response, clouds or darkness can prevent the use of optical images for detecting consequences of natural disasters, including landslides. In these situations, radar images can be used to detect changes more rapidly. However, Synthetic Aperture Radar (SAR) backscatter intensity images are underutilized for landslide detection. Unfortunately, there remains a lack of understanding about how to interpret landslide signatures in SAR imagery. In this study, we investigate how the morphometric features and material properties of landslides, and preexisting land cover, control their expression in SAR backscatter intensity change images. Trends in the spatial and temporal signatures of over 1000 landslides in 30 diverse case studies are investigated, using multi-temporal composites and dense time-series of Sentinel-1 C-band SAR backscatter intensity data. The results show that the orientation of landslide surfaces relative to the sensor, pre-existing land cover, and the roughness of the landslide surface, determine whether landslides will produce an increase or decrease in backscatter intensity values. In certain cases, we can identify morphometric features of landslides (e.g. scarps, transit zone, deposits, ponding) and material properties. Generally, we see that landslides appear most clearly with a strong increase in intensity when they occur in herbaceous vegetation or non-vegetated ground surfaces, due to an increase in surface roughness. While in forested or densely vegetated areas, landslides produce a more complex signature with both decreases due to radar shadow and vegetation removal, and an adjacent edge of increased intensity due to double bounce and direct return from vertical tree trunks and convex edges. In most cases, rough deposits produce an increase in intensity, while smooth deposits (e.g. from mudslides) exhibit specular reflection, and thus show decreased values. Landslides are less visible in cases with pre-event very rough ground, or mixed vegetation conditions. The conceptual model developed can aid interpretation of landslides in SAR imagery, and provide domain knowledge needed to train models for automatic landslide detection.

The demands for high power and low emissions put focus on energy efficiency when developing new engines. An important part is the UAV engine cooling system, which cools the engine structure below damaging temperatures. For high temperatures in the cooling system there is a risk that boiling occurs and while the initial nucleate boiling enhances the cooling effect, the subsequent Film boiling decreases the heat transfer drastically. It is important to understand the benefits and limitations of various fluids when designing a two-phase cooling system. This paper proposes an alternative organic coolant. Its normal application range is 15°C to 400°C, and its pressure range is from atmospheric to 10.6 bar. DOWTHERM A fluid possesses unsurpassed thermal stability at temperatures of 400°C. This fluid, in both the liquid and vapor form, is noncorrosive toward common metals and alloys. Even at the high temperatures involved, the equipment usually exhibits excellent service life. Original equipment in many systems is still being used after 30 years of continuous service. The numerical results, described in this paper, show the potential of DOWTHERM A as a good alternative for cooling a UAV engine. It will extend the working temperature range of the Diesel engine and will maintain the structural integrity of the piston, cylinder and the piston rings.

The overarching aim of this paper is to investigate the lake ecosystem response to different drivers over a long term period by a paleolimnological study in Lake Narlay (46°64N, 5°91E) located in the Jura Mountains of France. It is a small, hard-water lake with a maximum water depth of 40 m and extended anoxic condition of the bottom water. Previous results on sediments analysis have documented a differential response of the lake to the environmental changes that occurred in AD 1600 when major shift in the trophic reliance on methane of the benthic food web were observed. From 1920 with intensification of modern agriculture, animal farming and the construction of a cheese making facility, the lake become eutrophic, with Oscillatoria rubescens bloom. However, the lake showed pronounced changes in an older period that remained unanswered. In this paper we aim at reconstructing in more detail the limnological conditions of this Lake over the last 1200 yrs. using combined analyses of specific algal carotenoids and subfossil diatom remains. A comparison with other proxies (chironomid, pollen, and instrumental climatic reconstruction) will be used to better identify, between the complex combination of climate and anthropogenic pressure, the driving factors that determined the ecological trajectory of Lake Narlay.

Servitization or productization, indicating evolution from product to service economy or vice-versa, can be considered as a successful strategy to gain competitiveness based on novel combination of products and services. To decrease the risks of servitization and to support the sustainable development of its main outcome, being Product Service System (PSS), it is required not only to have a clear and common understanding of the core business and processes but also to share the same definitions on (PSS) concepts as the main outcome of servitization. For this purpose, managers could be supported by abstract models with a limited number and high ratio of known concepts in the early stages of PSS development. Through an extensive literature review on this subject, followed by a structured conceptualization approach and discussions with domain experts, this paper proposes a Conceptual Model (PSS-CM). To validate the results, PSS-CM and its elements were discussed in several iterations, from both academic and industrial points of view, in the frame of a European research project. In the frame of this project, a case study was also performed to illustrate the instantiation of PSS-CM.

Stagnation is the transient state of a solar thermal system under high solar irradiation where the useful solar gain is zero. Both flat-plate collectors with selective absorber coatings and vacuum-tube collectors exhibit stagnation temperatures far above the saturation temperature of the glycol-based heat carriers within the range of typical system pressures. Therefore, stagnation is always associated with vaporization and propagation of vapor into the pipes of the solar circuit. It is therefore essential to design the system in such a way that vapor never reaches components that cannot withstand high temperatures. In this article, a thermal-hydraulic model based on the integral form of a two-phase mixture model and a drift-flux correlation is presented. The model is applicable to solar thermal flat-plate collectors with meander-shaped absorber tubes and selective absorber coatings. Experimental data from stagnation experiments on two systems, which are identical except for the optical properties of the absorber coating, allowed comparison with simulations carried out under the same boundary conditions. The absorber of one system features a conventional highly selective coating, while the absorber of the other system features a thermochromic coating, which exhibits a significantly lower stagnation temperature. Comparison of simulation results and experimental data show good conformity. This model is implemented into an open-source software tool called “THD” for the thermal-hydraulic dimensioning of solar systems. The latest version of THD, updated by the results of this article, enables planners to achieve cost-optimal design of solar thermal systems and to ensure failsafe operation by predicting the steam range under the initial and boundary conditions of worst-case scenarios.

Impervious surface mapping with high-resolution remote sensing imagery has attracted increasing interest as it can provide detailed information for urban structure and distribution. Previous studies have suggested that the combination of LiDAR data and high-resolution imagery for impervious surface mapping performs better than using only high-resolution imagery. However, due to the high cost of the acquisition of LiDAR data, it is difficult to obtain the multi-sensor remote sensing data acquired at the same acquisition time for impervious surface mapping. Consequently, real landscape changes between multi-sensor remote sensing data at different acquisition times would lead to the error of misclassification in impervious surface mapping. This issue has mostly been neglected in previous works. Furthermore, the observation differences generated from multi-sensor data, including the problems of misregistration, missing data in LiDAR data, and shadow in high-resolution images would also challenge the final mapping result in the fusion of LiDAR data and high-resolution images. In order to conquer these problems, we propose an improved impervious surface mapping method incorporating both LiDAR data and high-resolution imagery at different acquisition times in consideration of real landscape changes and observation differences. In the proposed method, a multi-sensor change detection by supervised multivariate alteration detection is employed to obtain changed areas and misregistration areas. The no-data areas in the LiDAR data and the shadow areas in the high-resolution imagery are extracted by independent classification yielded by its corresponding single sensor data. Finally, an object-based post-classification fusion is proposed to take advantage of independent classification results with single-sensor data and the joint classification result with stacked multi-sensor data. Experiments covering the study site in Buffalo, NY, USA demonstrate that our method can accurately detect landscape changes and obviously improve the performance of impervious surface mapping.

This work assesses sea-level rise using three different models created on Free and Open-Source Software for Geographic Information System (FOSS4GIS). Based on regional projections of Special Report on Climate Change and Oceans and Cryosphere (SROCC) of the Intergovernmental Panel on Climate Change (IPCC), the models were applied to a case of study on Rio Grande do Sul coast – Brazil under different sea-level rise scenarios by the end of this century. The End Point Rate for QGIS (EPR4Q), calculates a shoreline projection using End Point Rate method. The Uncertainty Bathtub Model (uBTM), analyses the sea-level rise impact by the uncertainty of sea-level projec-tions and vertical error of the Digital Elevation/Terrain Model (DEM/DTM). The Bruun Rule for Google Earth Engine Model (BRGM) predicts the shoreline position with sea-level rise, using topographic and bathymetric data from Unmanned Aerial Vehicles (UAV) and Coastal Modelling System (SMC – Brazil), respectively. The results indicated a maximum shoreline retreat for 2100 of -502 m and -1727 m using EPR4Q and BRGM, correspondingly. The uBTM using the land-use of Mapbiomas showed a maximum of 44.57 km2 of urban area impacted by the sea-level flood. This research highlights the possibility of performing coastal management analysis in GIS environ-ment using non-commercial software.

This research is related to the eco-hydrological problems of herbaceous wetland drying and biodiversity loss in the floodplain lakes of the Middle Basin of the Biebrza river (Poland). An experiment was set up, whose main goals were: (i) mapping the vegetation types and the temporarily or permanently flooded areas, and (ii) comparing the usefulness of C-band Sentinel-1A (S1A) and X-band TerraSAR-X/TanDEM-X (TSX/TDX) for mapping purposes. The S1A imagery was acquired on a regular basis using the dual polarization VV/VH and the Interferometric Wide Swath Mode. The TSX/TDX data were acquired in quad-pol, a fully polarimetric mode, during the Science Phase. The paper addresses the following aspects: i) wetland mapping with S1A multi-temporal series; ii) wetland mapping with fully polarimetric TSX/TDX data; iii) comparing the wetland mapping using dual polarization TSX/TDX subsets, i.e. HH-HV, HH-VV and VV-VH; iv) comparing wetland mapping using S1A and TSX/TDX data based on the same polarization (VV-VH); v) studying the suitability of the Shannon Entropy for wetland mapping; and vi) assessing the contribution of interferometric coherence for wetland classification. The experimental results show main limitations of the S1A dataset, while they highlight the good accuracy that can be achieved using the TSX/TDX data, especially those taken in fully polarimetric mode.

The investigation of submerged speleothems for sea level studies has made significant contributions to the understanding of the global and regional sea level variations during the Middle and Late Quateranry. This has been especially the case for the Mediterranean Sea, where more than 300 submerged speleothems sampled in 32 caves have been analysed so far. Here, we present a comprehensive review of the results obtained from the study of submerged speleothems since 1978. The studied speleothems cover the last 1.4 Ma and are focused mainly on Marine Isotope Stages (MIS) 1, 2, 3, 5.1, 5.3, 5.5, 7.1, 7.2, 7.3 and 7.5. Results reveal that submerged speleothems represent extraordinary archives providing accurate information on former sea level changes, also considering that the Mediterranean Sea is devoid of any tropical corals since the Miocene. New results from a stalagmite collected at Palinuro (Campania, Italy) characterized by marine overgrowth are also reported. The measured elevations of speleothems are contaminated by the local response to glacial- and hydro-isostatic adjustment (GIA), and thus might significantly deviate from the global eustatic signal. Age and altitude comparation between Mediterranean speleothems, flowstone from Bahamas with local GIA provide a new scenario for MIS 5 and 7 sea level reconstrutions.

Crop plants should be resilient to climatic factors in order to feed ever-increasing populations. Plants have developed stress-responsive mechanisms by changing their metabolic pathways and switching the stress-responsive genes. The discovery of plant transcriptional factors (TFs) as key regulators of different biotic and abiotic stresses have opened up new horizons for plant scientists. TFs perceive the signal and switch certain stress-responsive genes on and off by binding to different cis-regulatory elements. The above 50 species of plant TFs have been reported in nature. DREB, bZIP, MYB, NAC, Zinc-finger, HSF, Dof, WRKY, and NF-Y are important with respect to biotic and abiotic stresses whereas the role of many TFs is yet to explore. In this review, we summarize the role of different stress-responsive TFs with respect to biotic and abiotic stresses. Further, challenges and future opportunities linked with TFs for developing climate-resilient crops are also elaborated.

Historical analysis of Australian bushfire data spanning 170 years addresses whether the strength of recent fire events has been exacerbated by human-induced climate change. The question of “cause” looks at the characteristics of a wider range of natural hazards. Fire characteristics are compared with earthquake hazard characteristics: (1) energy – termed “magnitude”; (2) severity – termed “intensity”; and (3) resultant damage to people and structures – termed “impact”.Published global, Northern and Southern hemisphere temperature data are shown to vary consistently in phase over 170 years, but vary in amplitude with statistical significance. CO₂ levels north and south of the Equator have tracked quite consistently. Thus, Southern Hemisphere bushfire magnitude and intensity is compared with the Southern Hemisphere climate record, rather than a global data set.28 major bushfires and associated droughts since 1850 show neither apparent drought extent, nor area burned, nor bushfire intensity, correlates with changes in Southern Hemisphere climate. Average rainfall from 1900 shows a wetter, rather than drier trend. Cyclone energy shows no significant trend with climate. Planet-wide “greening”, through CO₂ fertilisation, is an insignificant contributor to bushfire magnitude. Combustion theory shows recorded “global warming” could have had no significant influence on bushfire magnitude or intensity. Any increase in Australian bushfire impact, as judged by lives lost, similarly, shows no correlation with bushfire magnitude, nor indeed, any observed Southern Hemisphere global warming.Thus, bushfire magnitude seems much more likely driven by fuel load and any anomalous bushfire intensity is likely driven by anomalous ground level fuel load. The evidence suggests that any CO₂ emissions reduction will have no impact on future bushfire “severity.

Loess was deposited in the Negev during the Pleistocene, but such sediments seem to be missing for the Holocene. This could be due to erosion unless structures such as ruins offered protection. We studied soils developed on archaeological hilltop ruins in the Negev and the Petra region and compared them with local soils, paleosols, geological outcrops, and current dust. The ruin soils in both regions were found to consist of similarly complex mixtures of local and remote sediment sources. They differ from sediments deposited during current dust storms. This seems due to fixation processes: average accretion rates are estimated to ~0.14 mm/a, suggesting that only ~3% of the current dust that can be trapped with dry marble dust collectors is stored in the soils. Vegetation, biocrusts, and/or clast pavements associated with vesicular layers seem to act as sediment-fixing agents. As well, climate might play a role: rain, and in particular one snowstorm in the Petra region brought a high amount of sediment that was more similar to the ruin soils. Wet deposition and snow might catalyze dust deposition and enhance fixation by fostering vegetation and crust formation. Frequent snow during the Pleistocene might be one explanation of enhanced loess deposition.

This study investigates proximate drivers of cropland and forest degradation in Kloto district (Togo, West Africa) as, way of, exploring integrated sustainable landscape approaches in respect to socio-economic and environmental needs and requirements. Net change analysis of major cash and food crops based on three time steps Landsat data (1985–2002, 2002–2017 and 1985–2017) and quantitative analysis from participatory survey data with farmers and landowners are used. Study underlines poor agricultural systems and cassava farming as major impediments to alarming forest losses between 1985–2017. Significant net loss in forests cover by 23.6% and surface areas under cultivation of cocoa agroforestry and maize by 12.99 and 10.1% from 1985 to 2017, due to, intensive cassava cropping (38.78%) and settlement expansions (7.84%). Meanwhile, loss in forest cover between 2017 and 2002 was marginal (8.36%) compared to the period 1985–2002 for which the loss was considerable (15.24%). Based on participatory surveys, majority of agricultural lands are threatened by erosion or physical deterioration (67.5%), land degradation or salt deposits and loss of micro/macro fauna and flora at 56.7%, declining in soil fertility (32.5%), soil water holding capacity (11.7%) and changes in soil texture (3.3%). Majority of farmers adhere to the adoption of the proposed climate smart practices with emphasis on cost effective drip irrigation systems (45.83%), soil mulching (35%) and adoption of drought resilient varieties (29.17%) to anticipate drought spells adverse. The study concludes that low adoption of improved soil conservation, integrated water management and harvesting systems and low productive and adaptive cultivars entail extreme degradation of croplands and crops productivity decline. Therefore, farmers are forced to clear more forests in search of stable and healthy soils for production and extraction of forest products to meet their food demands and improve their livelihoods conditions. Capacity building on integrated pathways of soil and land management practices are therefore needed to ensure sustainable and viable socio-ecological systems at local scale.

This research paper aims to examine the relationship between CO2, temperature, area, fertilizers and rice production in Pakistan. This study used Augmented Dickey Fuller (ADF) and Phillips Perron (PP) unit root tests to check the order of integration of each variable. The cointegration analysis with ARDL bounds testing approach is used to examine the impact of climate change on rice production in Pakistan over time series data from the period 1968 to 2014. The parameter stability test of the model is also checked at the end. The results of estimation show that the important variables of the study are cointegrated demonstrating the presence of long-run association among them. Furthermore, climate change factors, e.g. CO2 and temperature have a long-run and short-run positive effect on the production of rice in Pakistan. This present work is original and it is first time empirically tested the impact of climate change on rice production in Pakistan. The annual time series data of 47 years enhances the validity of the empirical findings. The most fruitful finding of this research is that rice production in Pakistan is positively influenced by emission of carbon dioxide (CO2) at 5 percent significance level in both long-run and short-run.

This study examines whether information about the winners of the Sustainability Reporting Award (SRA) contributes to the usefulness of the information in the financial statements. This study used a sample consisting of 110 winners of SRA (SRA firms) and 110 companies that did not receive SRA (non-SRA firms) from 2008 to 2016. The study found that earnings per share (EPS), book value per share (BVPS), and earnings per share change (EPSC) are value relevant information. Results of comparison between SRA firms and non-SRA fimrs, this study found that EPS positive association with stock price and with returns for SRA firms is higher than that for non-SRA firms. Findings of this study also show that, value relevance of BVPS for non-SRA firms is higher than that for SRA firms. When mesures of Price and BVPS are transformed into natural logarithm, the value relevance of BVPS for SRA firms is higher than that for non-SRA firms. Thus, the results are sensitive to measures of the variables. The findings of this study indicate that information about the winners of SRA contributes to the usefulness of financial statements.

In this review, we summarize the current state-of-the-art in the utilization of close-range sensing in forest monitoring. We include technologies, such as terrestrial and mobile laser scanning as well as unmanned aerial vehicles, which are mainly used for collecting detailed information from single trees, forest patches or small forested landscapes. Based on the current published scientific literature, the capacity to characterize changes in forest ecosystems using close-range sensing has clearly been recognized. Forest growth has been the most investigated cause for changes and terrestrial laser scanner the most applied sensor for capturing forest structural changes. Unmanned aerial vehicles, on the other hand, have been used to acquire aerial imagery for detecting tree height growth and monitoring forest health. Mobile laser scanning has not yet been used in forest change monitoring except for a few early investigations. Considering the length of the forest growth process, investigated time spans have been rather short, less than 10 years. In addition, data from only two time points have been used in many of the studies, which has further been limiting the capability of understanding dynamics related to forest growth. In general, method development and quantification of changes have been the main interests so far regardless of the driver of change. This shows that the close-range remote sensing community has just started to explore the time dimension and its possibilities for forest characterization.