Afghanistan is overwhelmed with food insecurity that is a large percentage of the population lacks reliable access to food supplies. Grains play a vital role in the country's food security due to their importance in terms of consumption and production quantity. This paper estimates cereal self-sufficiency and then makes a food balance forecast of the three major food crops cultivated in Afghanistan over six-decades. Descriptive statistics and coarse metric techniques were employed to determine cereal self-sufficiency and food balance forecast. The econometric analysis demonstrated that (1) Afghanistan is not yet self-sufficient in meeting grain consumption, and the production and consumption ratio declined from 0.9 to 0.55 from 1979 to 2030. (2) The gap of theoretical food imbalance will increase, and by the year 2030, cereal production will likely be sufficient for only 49.8 percentage of inhabitants, leaving a high shortage equivalent to the amount required by 24.4 million people. By evaluating the quantitative food balance and the growing population change, this study presents an analysis of the emerging threat to Afghanistan's food security and suggests a solution for food security, should increase the size of public agricultural expenditure, improve the level of agriculture infrastructure, and continue to introduce a policy to achieve higher yield.

Background: The practice of self-medication is common worldwide and is an important component of medical self-care. However, the practice can be dangerous and is linked to various risks for the patients and the entire community. This study aimed to estimate the prevalence and factors associated with self-medication among Bangladeshi adults. Methods: A cross-sectional survey was conducted between April and June 2021 among Bangladeshi adults (aged >19 years) using convenient sampling. A total of 1320 data were collected through face-to-face interviews using a standardized questionnaire. Multivariable logistic regression analysis was used to identify factors associated with self-medication practice (SMP). Results: Overall, 41% of adults in our survey reported SMP. The most common illnesses that prompted SMP were common cold/flu (66.4%), gastric problems (65%), and headache (64.4%). The most frequent reasons for SMP were to get better services (30.59%), perceive SMP without side effects (23.28%), and save time with effectiveness (14.56%). Potential risk factors included 10 years (AOR = 1.91; 95% CI: 1.04 - 3.50) and >12 years of schooling (AOR = 5.03; 95% CI: 2.27 - 11.15), being a businessman (AOR = 4.64; 95% CI: 1.74 - 12.37), having ≤6 family members (AOR = 2.13; 95% CI: 1.40 - 3.24), being a member of a social group (AOR = 1.53; 95% CI: 1.10 - 2.12), a health status check after every six months (AOR = 1.52; 95% CI: 1.08 - 2.13), and current ill-health (AOR = 1.41; 95% CI: 1.06 - 1.87). Protective factors identified included ≤30 years of age (AOR = 0.40; 95% CI: 0.17 - 0.93), and practice of modern (AOR = 0.39; 95% CI: 0.22- 0.69) and herbal (AOR = 0.45; 95% CI: 0.21- 0.97) healing types. Conclusion: More than one-third of the study participants reported practicing self-medication. Increasing the community’s awareness of the extreme consequences of SMP and not just the average experience might sway individuals away from SMP, and implementing strict jurisdiction could be a way to minimize the SMP.

The study aimed to understand the experiences of adolescent smokers who participated in a smoking cessation program based on self-reflection, and to develop the theoretical basis for constructing similar programs. The participants, ten students from middle and high schools located in cities G and S, were interviewed after the program ended. Data were collected from August to November 2019 and analyzed using a phenomenological approach to understand participant experiences in depth. The analysis revealed five major themes: ‘Uniqueness of the Program,’ ‘Perception of Smoking Cessation,’ ‘Positive Reflection on Life,’ ‘Understanding Others,’ and ‘A Search for Hope and Vision in Life.’ The findings revealed that the smoking cessation program facilitated the development of self-identity and vision, which may indirectly strengthen the motivation for adolescent smokers to quit smoking. These findings suggest the need for a life-changing smoking cessation program that enhances self-concept and self-esteem. Moreover, it highlights the importance of follow-up research to ensure effectiveness, and the need to develop programs with creative content.

This work is the first part of a series of papers on a comprehensive analysis of the processes of prebiotic self-organization and protophotosynthesis on the surface of semiconductor minerals and in systems of natural dispersed semiconductors. Comprehensive analysis within the framework of the "semiconductor world" concept allows integrating a variety of models on a single physical basis - from ZnS world and FeS world (based on inorganic semiconductors) to the PAH world and aromatic world (including organic semiconductors). Thus, we do not put forward a new alternative hypothesis of chemical evolution - a new "chemical world", but only integrate the evolutionary and geochemical criteria of different "chemical worlds" into a single "physical world", which gives one the opportunity to reconstruct and predict the directions of chemical evolution according to the uniform principles of physical chemistry. In the first part of this series we consider photoinduced self-organization and "photo-controlled" evolution of the early protobiological systems performing solar energy conversion on the surface of dispersed semiconductor minerals capable of (photo)catalyzing and photosensitizing prebiological processes. The latter include a transition from the elementary cycles of photocatalytic reactions on the surface of semiconductors to protophotometabolic cycles and protophotosynthesis, from photophysical processes on the surface of mineral semiconductors to photoinduced membrane potentials, from photocontrolled sorption on the surface of such minerals to the formation of photosensitive protomembranes and selection of photosynthetic structures. The evolutionary approach to the analysis of protobiological mechanisms and protobioenergetics within the framework of the "semiconductor world" concept provides a new approach to the study of the last common point of divergence of protobiological systems, where the emergence principles of different energy supply schemes (like the energy source-specific photoautotrophy and substrate-specific chemoautotrophy) merge at the physicochemical level. The proposed integrating scheme is consistent with most biological, geological, and physicochemical concepts, which ensures its complete cross-checking and internal consistency.

Background and Objectives: In Libya, prescription medicines can easily be dispensed without a prescription, as self-medication with the subsequent of potential misuse and unnecessary risk for patients. This systematic review and meta-analysis explored the prevalence of self-medication among citizens in Libya. Methods: We systematically searched PubMed, ISI Web of Knowledge, EMBASE, Medline, Scopus, google scholar and ResearchGate databases for studies published in Libya reporting the prevalence of non-prescription use of medicines in community pharmacies, targeting studies published from Jan 2008 until Dec 2019. A random meta-analysis was performed to analyze pooled estimates of non-prescription usage of medicines. Results: Out of 63 articles identified, a total of 13 papers from 7 cities were met the inclusion criteria and involved a total of 4741 subjects. The overall pooled proportion of self-medication of drugs was 53.6% (95% CI: 0.93% - 1.08%), with low heterogeneity and the P-value of the whole population tasted was found to be = 1.000 (df = 12). Seven out of the 13 studies reported data on self-medication for antibiotics without prescription. The records ranged from 15.3% (95% CI 0.61–1.65) in Misurata to 76.6% (95% CI 0.80–1.25) in Tripoli. Conclusion: Self-medication use of medicines among Libyan population is a common phenomenon involving a high proportion use of antibiotics. This misuse of medications could enhance the development and spread of antibiotic resistance.

This study aimed to know the conditioning factors of the transition process to the self-care of women diagnosed with HIV/AIDS. This qualitative study was carried out from June to September 2015 with seven seropositive women, users of a specialized service in sexually transmitted diseases in the municipality of Imperatriz, Maranhão State, Brazil. For the data collection, an individual interview was used, and data analysis was performed by content analysis delineated by Hsieh and Shannon (2005). The resources that influence the self-care in the transition process of women with HIV/AIDS are represented by personal conditioning factors, such as the meaning they attribute to the living with the disease, personal attitudes and cultural beliefs, socioeconomic status, preparation and knowledge about the disease, and by conditioning factors found in the community and society. The transition theory can provide important insights about the resources present in the adaptation process of women diagnosed with HIV so that they can perform their self-care satisfactorily.

This study proposes self-calibration of capacitor mismatch errors for high-resolution pipeline analog-to-digital converters (ADCs). The proposed calibration circuit recursively amplifies the capacitor mismatch error by re-utilizing a multiplying digital-to-analog converter in a pipeline stage without increasing the circuit complexity, and the amplified error voltage is converted into digital code by utilizing the remaining pipeline stages. Error correction is performed by subtracting the digital code from the ADC output during normal operation. A prototype of a 12-bit pipeline ADC is fabricated in a 0.18 µm standard CMOS process. The ADC comprises eight 1.5-bit stages, followed by a 4-bit flash ADC as the final stage; the capacitor mismatch errors in the first two pipeline stages are corrected by utilizing the proposed self-calibration technique. At a sampling rate of 30 MS/s, the measured differential and integral nonlinearities improve from +0.82/-0.75 and +1.12/-1.79 to +0.45/-0.41 and +0.47/-0.91 after calibration, respectively. Further, the measured dynamic performances improve significantly with calibration. For an input frequency of 2.09 MHz, the ADC achieves a spurious-free dynamic range (SFDR) and signal-to-noise and distortion ratios (SNDR) of 69.3dB and 63.9dB before calibration, respectively. After calibration, the SFDR and SNDR increase to 84.1dB and 68.9dB, respectively, and the effective number of bits is approximately 11.1bit. The power consumption of the ADC is 35mW under 1.8V supply, and the resulting figure of merit is 514fJ/conversion step.

The present study was designed to develop a self-micellizing solid dispersion (SMSD) containing Thymoquinone (TQM), a phytonutrient obtained from Nigella sativa seeds, aiming to improve its biopharmaceutical and nephroprotective functions. The apparent solubility of TQM in polymer solutions was used to choose an appropriate amphiphilic polymer that could be used to make an SMSD system. Based on the apparent solubility, Soluplus® was chosen as an appropriate carrier, and mixing with TQM, SMSD-TQM with different loadings of TQM (5–15%) was made by solvent evaporation and freeze-drying techniques, respectively, and the formulations were optimized. The optimized SMSD-TQM was evaluated in terms of particle size distribution, morphology, release characteristics, pharmacokinetic behavior, and nephroprotective effects in a rat model of acute kidney injury. SMSD-TQM significantly improved the dissolution characteristics (97.8%) of TQM in water within 60 min. Oral administration of SMSD-TQM in rats exhibited a 4.9-fold higher systemic exposure than crystalline TQM. In a cisplatin-induced (6 mg/kg, i.p.) acute kidney-damaged rat model, oral SMSD-TQM (10 mg/kg) improved the nephroprotective effects of TQM based on the results of kidney biomarkers and histological abnormalities. These findings suggest that SMSD-TQM might be efficacious in enhancing the nephroprotective effect of TQM by overcoming biopharmaceutical limitations.

Nigella sativa's thymoquinone (TQM), a water-insoluble phytonutrient exhibits nephroprotective effects. This study intends to develop a self-micellizing solid dispersion (SMSD) of TQM for better biopharmaceutical and nephroprotective performance. Soluplus®-based SMSD of TQM was created and tested for physicochemical properties, solubility, and pharmacokinetics in rats. Plasma creatinine, blood urea nitrogen (BUN), nephrotoxic indicators, and oxidative stress biomarkers were also tested. During SMSD preparation, TQM was found amorphous, boosting solubility. Minimal band changes between TQM and Soluplus® indicate insignificant drug-carrier interactions. SMSD-TQM generated fine micelles in water, improving TQM's solubility by 97.8% in 60 min. SMSD-TQM was 4.9 times more bioavailable orally in rats than crystalline TQM. In a rat model of acute renal damage by cisplatin (6 mg/kg, i.p.), SMSD-TQM (10 mg-TQM/kg, p.o.) reduced blood creatinine and BUN by 56% and 63.2%, respectively. These findings imply that SMSD-TQM may be a potent dosage option for enhancing TQM's nutrient value.

This paper provides estimates of the elasticity of substitution between operational and managerial jobs in the US economy covering a period of almost five decades, derived from an aggregate CES production function. Estimating the long-term relationship between (the log of) the aggregate employment/self-employment ratio and (the log of) the returns from paid-employment relative to self-employment and testing for structural breaks, we report different estimates of the elasticity of substitution in each of the two regimes identified. Our results help to understand and interpret one of the most intriguing aspects in the evolution of self-employment rates in developed countries: the reversal of the trend in self-employment rates. Our estimates show that a higher level of development is associated with a greater number of entrepreneurs and smaller firms. Some rationales for understanding the growth of the elasticity between paid-employment and self-employment, including the recent trends in the digital economy—are also suggested.

This research aims to introduce a new technique, off-site and self-form segmental concrete masonry arches fabrication, without the need of construction formwork or centering. The innovative construction method in the current study encompasses two construction materials forms the self-form masonry arches, wedge-shape plain concrete voussoirs, and Carbon Fibers Reinforced Polymers (CFRP) composites. The employment of CFRP fabrics was for two main reasons; bond the voussoirs and forming the masonry arches. However, CFRP proved to be efficient for strengthening the extrados of the arch rings under service loadings. An experimental test conducted on four sophisticated masonry arch specimens. Research parameters were using thicker keystone as well as the partial strengthening of the self-form arch ring at the intrados. Major test finding was the use of thicker Keystone, alter the behavior of the self-form arch, considerably increased the load carrying capacity by 79%. Partial strengthening of the intrados with CFRP fabrics of typical arch ring Keystone resulted considerable increased the debonding load of fabrication CFRP sheets by 81%, increase the localized crushing load by 13%, and considerably increase voussoir sliding load by 107%.

Tinnitus is an auditory phantom perception in the ears or head in the absence of a corresponding external stimulus. There is currently no effective treatment available that reliably reduces tinnitus. Educative counseling is a treatment approach that aims to educate patients and inform them about possible coping strategies. For this feasability study, we implemented educational material and self-help advice in a smartphone app. Participants used the educational smartphone unsupervised during their daily routine over a period of 4 months. Comparing the tinnitus outcome measures before and after smartphone-guided treatment, we measured changes in the tinnitus-related distress, but not in tinnitus loudness. Improvements on the Tinnitus Severity numeric rating scale reached an effect size of .408, while the improvements on the THI were much smaller with an effect size of .168. Analysis on the user behavior showed that frequent and intensive use of the app is a crucial factor for treatment success: participants that used the app more often and interacted with the app intensively, reported a stronger improvement of the tinnitus. Between study allocation and final assessment, 26 of 52 participants dropped out of the study. Reasons for the dropouts and lessons for future studies are discussed in this paper.

cGAS is a cytosolic DNA sensor that activates innate immune responses through production of the second messenger 2’3’-cGAMP, which activates the adaptor STING. cGAS senses dsDNA in a length-dependent but sequence-independent manner, and it cannot discriminate self-DNA from foreign DNA. In normal physiological conditions, cellular DNA is sequestered in the nucleus by nuclear envelope and in mitochondria by mitochondrial membrane. When self-DNA leaks into the cytosol during cellular stress, or during mitosis, the cGAS can be exposed to self-DNA and be activated. Recently, many studies have investigated how cGAS keeps inactive and avoids to be aberrantly activated by self-DNA. Thus, the aim of this narrative review is to summarize the mechanisms by which cGAS avoids to sense self-DNA under normal physiological conditions.

By manipulating the various physico-chemical properties of amino acids, design of peptides with specific self-assembling properties has been emerging since more than a decade. In this context, short peptides possessing detergent properties (so-called “peptergents”) have been developed to self-assemble into well-ordered nanostructures that can stabilize membrane proteins for crystallization. In this study, the peptide with “peptergency” properties, called ADA8 extensively described by Zhang et al., is studied by molecular dynamics for its self-assembling properties in different conditions. In water, it spontaneously forms beta sheets with a β barrel-like structure. We next simulated the interaction of this peptide with a membrane protein, the bacteriorhodopsin, in the presence or absence of a micelle of dodecylphosphocholine. According to the literature, the peptergent ADA8 is thought to generate a belt of β structures around the hydrophobic helical domain that could help stabilize purified membrane proteins. Molecular dynamics is here used to challenge this view and to provide further molecular details for the replacement of detergent molecules around the protein. To our best knowledge, this is the first molecular mechanism proposed for ''peptergency''. In addition, our calculation approach should serve as a predicting tool for the design of beta peptergent with diverse amphipathic properties.

Owing to the time-varying characteristics and nonlinearities of industrial processes, control has higher difficulties and results in challenges for advanced technology. In this paper, a self-tuning controller that includes a nonlinear proportional-integral-derivative (NPID) control function as well as a self-tuning function is proposed for first-order plus time delay (FOPTD) process control. The NPID control function is implemented using the nonlinear PID controller whose optimum parameters are adapted by a neural network (NN). The self-tuning function is able to identify the process dynamics using a short period of process behavior and tune NPID parameters based on the identified parameters. The advantage of the proposed method is validated with a set of simulation works on three processes and the comparison results are presented.

Diabetes self-management education helps to improve health outcomes, quality of life and to reduce expenses for diabetic patients. This systematic review aimed to examine the effectiveness of diabetes self-management education used for newly diagnosed patients with type 2 diabetes (T2DM). A review of studies that have researched the use and the impact of health education in newly diabetic patients with T2DM was implemented. A literature search was conducted using the electronic database of Pub MED, Walters Kluwer, Cochrane Library, Elsevier, JSTORE between January 2017 – November 2022. The data on participants and intervention characteristics were extracted by two reviewers independently. We found 789 studies and after selection of PRISMA flow chart we selected 19 studies, including 2512 newly diagnosed adult T2DM. Biomedical results presented the pooled effect of HbA1c -0.64%, FBG -0.32. The evaluation of emotional and social results and behavioral effects has been evaluated respectively in 10 and 9 studies. The education and support of recently diabetic patients help to improve biomedical, psychosocial, and behavioral results. This intervention must be ongoing to maintain healthy behaviors

Nanoparticle (NP)–surfactants formed by the self-assembly of NPs and end-functionalized polymers at the hydrophilic/hydrophobic interface have a wide range of applications in many fields. In this study, the influence of density of amino groups, NPs dimension and pH on the interaction between end-functionalized polymers and NPs were extensively investigated. Single amino-terminated polystyrene (PS-NH2, Mw ≈ 0.6k, 2.5k, 3.5k, 3.9k) and diamino-terminated polystyrene (H2N-PS-NH2, Mw ≈ 1.1k, 2.8k) were prepared using reversible addition–fragmentation chain transfer polymerization and atom transfer radical polymerization. NPs with different dimensions (zero-dimensional carbon dots with sulfonate groups, one-dimensional cellulose nanocrystals with sulfate groups and two-dimensional graphene with sulfonate groups) in the aqueous phase were added into the toluene phase containing the aminated PS. The influence of pH and the molecular weight of amino-terminated PS on the interfacial tension between two phases were investigated. The results indicate that aminated PS exhibited the strongest interfacial activity after compounding with sulfonated NPs at a pH of 3. Terminating PS with amino groups on both ends leads to better performance in in reducing the water/toluene interfacial tension than modifying the molecular structure of PS on a single end. The dimension of sulfonated NPs also contributed significantly to the reduction of the water/toluene interfacial tension. The minimal interfacial tension was 4.49 mN/m after compounding PS-NH2 with sulfonated zero-dimensional carbon dots. Molecular dynamics simulation on the evolution of the water/toluene interface in the presence of sulfonated carbon dots and H2N-PS-NH2 revealed that these opposite charged substances moved towards the interface in an extreme short time and orderly assembled in a thermodynamic equilibrium.

We used a mixed-method single-case experimental research design to examine the effect of modelling (peer versus non-peer) on exercise self-efficacy in stroke survivors who participated in a community-based exercise program. Quantitative data were obtained using a ABCA design: (A1) no model/baseline 1 (3 weeks); (B) peer model (6 weeks); (C) non-peer model (6 weeks); and (A2) no model/baseline 2 (3 weeks). Four participants completed self-efficacy questionnaires after each weekly session. Qualitative data were obtained using researcher diaries and two semi-structured interviews: after B and A2. Based on quantitative and qualitative results, participants reported higher exercise self-efficacy in the model conditions, with ratings appearing highest for the non-peer model. This finding could be due to a lack of full integration of the peer model and low feelings of similarity. Modelling in general could help people recovering from a stroke increase their exercise self-efficacy, but non-peer models may not be most advantageous.

Self-employed individuals comprise around 15% of Canada’s workforce. For those with cancer, frequent functional loss and diminished work ability due to side effects of the disease and its treatment significantly impact their well-being and business vitality. Compared to salaried can-cer survivors, the self-employed experience greater reductions in work hours and up to 48% greater income loss, yet most research addresses the former population. To describe self-employed Canadian cancer survivors’ experiences continuing and returning to work, our quali-tative study examines their strategic efforts to continue working throughout the disease trajecto-ry or return to work post-recovery. Employing an interpretive description approach and an in-terview guide based on a vocational rehabilitation model for cancer survivors, we analyze data from 23 participants—both French- and English-speaking—from six Canadian provinces, with eight different job types and nine different cancer diagnoses. Our constant comparative analysis of the transcribed interviews reveals four major themes and twelve sub-themes: Impact of can-cer on the self-employed function (physical, cognitive, and psychological), on their ability to maintain their business, and financial well-being, and facilitating factors for working with can-cer. Cancer disclosure and non-disclosure were both deemed viable strategies, but ceasing work was not. We thus recommend professional support for self-employed cancer survivors in plan-ning any necessary business modifications to accommodate their condition and cancer treatment to lessen the negative impact of cancer on self and on their business well-being.

Diagnosis of Awake Bruxism (AB) is problematic due to the inability to use continuous recordings during daytime activities. Recently, a new semi-instrumental approach was suggested, viz., an Ecological Momentary Assessment (EMA), with the use of a smartphone application. With the application subjects are requested to report, at least 12 times per day, the status of their masticatory muscle activity (relaxed muscles, jaw bracing without tooth contact, teeth contact, teeth clenching or teeth grinding). The aim of the present study was to compare the EMA to the assessment of AB as defined by a single point self-report. The most frequent condition recorded by the EMA was relaxed muscles (ca. 60%) and the least frequent one - Teeth grinding (0.6 %). The relaxed muscle condition also showed the lowest coefficient of variance over a 7day period of report. Additionally, only the relaxed muscles and the Jaw bracing conditions presented an acceptable ability to discriminate between AB positive and AB negative subjects, as defined by single point self-report questions. The combination between self-report and EMA may have a potential to promote our ability to diagnose AB. We suggest to re-consider the conditions of Teeth contact and Teeth grinding while using EMA to evaluate AB.

Self-perceived health is an important indicator of occupational health. This research explores the relationship between poor self-perceived health and exposure to psychosocial risk factors, taking into account potential socio-demographic, occupational and employment determinants. Using data from the First Survey of Occupational Safety and Health Conditions covering 1049 salaried workers in Guayaquil, Ecuador descriptive and stratified binary logistic regression analyses (Odds Ratios with corresponding 95% confidence intervals) were carried out. No significant relationship was found between exposure to psychosocial risk factors and the probability of presenting poor self-perceived health by socio-demographic, occupational and employment characteristics. Occupational exposure factors to psychosocial risks are predictors of self-perceived ill health and are related to the variables analyzed; the most frequently expressed factors among the respondents were Cognitive Demands (DGOG) and Job Insecurity (IL). The results have implications in terms of designing effective workplace interventions pursuant of ensuring the health and wellbeing of employee.

Recently deep cross-modal hashing networks have received increasing interests due to its superior query efficiency and low storage cost. However, most of existing methods concentrate less on hash representations learning part, which means the semantic information of data cannot be fully used. Furthermore, they may neglect the high-ranking relevance and consistency of hash codes. To solve these problems, we propose a Self-Attention and Adversary Guided Hashing Network (SAAGHN). Specifically, it employs self-attention mechanism in hash representations learning part to extract rich semantic relevance information. Meanwhile, in order to keep invariability of hash codes, adversarial learning is adopted in the hash codes learning part. In addition, to generate higher-ranking hash codes and avoid local minima early, a new batch semi-hard cosine triplet loss and a cosine quantization loss are proposed. Extensive experiments on two benchmark datasets have shown that SAAGHN outperforms other baselines and achieves the state-of-the-art performance.

Tungsten and its alloys are considered as a key component in high temperature environment. Self-passivating W-Si-xY alloys with different Y contents made from the powders milled for different times were prepared by mechanical alloying (MA) and spark plasma sintering (SPS). Their microstructures and oxidation resistance were investigated. It is found that the oxidation resistance of the alloys with low Y contents (0Y and 2Y) made from 20 h-milled powders is worse than that of the alloys made from 4 h-milled powders. It is because the protective WO3/SiO2 composite layer is discontinuous. While the alloys with high Y contents (4Y and 6Y) made from 4 h and 20 h-milled powders show good oxidation resistance. Even, the thickness of the oxide layer of the alloys with 4Y and 6Y made from 20 h-milled powders after oxidation at 1000 ℃ for 2 h is 84.0 μm and 70.7 μm, less than that made from 4 h-milled powders. This is due to the size and distribution of W5Si3, Y2Si2O7 aggregates and W-Y-O melt. The synergistic effects of Y contents and milling time on the microstructures and oxidation resistance of the alloys are revealed.

We explore 3D printing modules for self-assembling spacecraft and robots – structure, actuators, electrics. Self-assembly has long been viewed as a highly desirable capability for autonomous construction of large space structures. We review self-assembly in space which focusses on the self-assembly of modules that demonstrate the range of applications. However, self-assembly may be synergised with 3D printing to offer an automated capability from raw material to modules for assembling new spacecraft or habitats. One application of 3D printing is using space debris on-orbit as an in-situ resource - defunct spacecraft may be salvaged as raw material for in-situ construction on demand. The common features of all self-assembling modules are that the modules constitute a structure housing a computer-controlled actuator internally and a reversible latching mechanism externally. We have demonstrated a 3D printed DC electric motor in which the only components that were not 3D printed are the wire coils. We have married our 3D printed motor prototype as an actuated joint between two 3D printed trigon-type panels developed as part of a trigon self-assembling system concept. The trigon concept underlies a modular approach to self-assembling and self-deploying structures. The 3D printed motorised panel system demonstrates that the motor aspect and structural aspects of robotic self-assembling machines are amenable to 3D printing. This has implications for self-assembling systems into modular satellites as a solution to space debris.

The runtime environment is an important concern for self-adaptive systems (SASs). Although researchers have proposed many approaches for developing SASs that address the issue of uncertain runtime environments, the understanding of these environments varies depending on the objectives, perspectives, and assumptions of the research. Thus, the current understanding of the environment in SAS development is ambiguous and abstract. To make this understanding more concrete, we describe the landscape in this area through a systematic literature review (SLR). We examined 128 primary studies and 14 unique environment models. We investigated concepts of the environment depicted in the primary studies and the proposed environment models based on their ability to aid in understanding. This illustrates the characteristics of the SAS environment, the associated emerging environmental uncertainties, and what is expressed in the existing environment models. This paper makes explicit the implicit understanding about the environment made by the SAS research community and organizes and visualizes them.

With the swift advancement of wearable electronic devices and the electronic textile industry, the energy storage components of these devices must possess the capability to maintain stable mechanical and chemical properties even after undergoing multiple bending or tensile deformations. This circumstance has expedited research efforts toward novel materials, processing techniques, and designs for flexible energy storage devices. Among the myriad of materials investigated thus far, biomass-derived architectures have garnered significant attention due to renewability, cost-effectiveness, and abundance in earthly resources. Notably, flexible carbon membrane/ monolithic derived from biomass serve as a particularly promising option for self-supporting electrodes, align seamlessly with the requirements of next-generation electronic devices, and obviate the need for additional costs, unnecessary weight, and the high contact resistance that additive insulating adhesives may entail. This review delves into the comprehensive analysis of biomass feedstocks and methodologies employed in the synthesis of flexible self-supporting carbon electrodes. Subsequently, the advancements in their application in energy storage devices are elucidated. Finally, an outlook on the potential of biomass self-supported carbon architectures and the challenges they face is provided.

Sarcasm is a linguistic expression often used to communicate the opposite of what is said, usually something that is very unpleasant with an intention to insult or ridicule. Inherent ambiguity in sarcastic expressions, make sarcasm detection very difficult. In this work, we focus on detecting sarcasm in textual conversations from various social networking platforms and online media. To this end, we develop an interpretable deep learning model using multi-head self-attention and gated recurrent units. Multi-head self-attention module aids in identifying crucial sarcastic cue-words from the input, and the recurrent units learn long-range dependencies between these cue-words to better classify the input text. We show the effectiveness of our approach by achieving state-of-the-art results on multiple datasets from social networking platforms and online media. Models trained using our proposed approach are easily interpretable and enable identifying sarcastic cues in the input text which contribute to the final classification score. We visualize the learned attention weights on few sample input texts to showcase the effectiveness and interpretability of our model.

This article has been developed to assess the economic feasibility of a roof-top photovoltaic installation of industrial self-consumption. Numerical models that enable an interested person to obtain the main expected parameters will be generated. To do this, a calculation methodology will be generated through which the reader, knowing the location of the facility and dimensions of the roof, will be able to calculate the maximum installable power, the main parameters related to production, the cost of the installation, and the LCOE of the plant. The use of actual costs will be facilitated in case they are known, but it will remain possible to apply the costs of the major equipment (modules, inverter, and structure) considered throughout the article. This developed calculation methodology will also allow a quick comparison of the forecasts of production, CAPEX, and LCOE of plants designed with different inclinations and different types of modules. Consequently, it will be especially useful for decision-making before developing the plant's basic engineering. Moreover, the calculations used for modeling the LCOE will be analyzed in depth. This analysis will allow evaluating how the different technical variables affect the profitability of a photovoltaic installation, such as the selected tilt, the location, the module's technology, or the available area.

Introduction: The application of the concept of self-regulation that has an impact on the psychological well-being of adolescent social media users as self-regulation in a core aspect of human functioning that helps facilitate the successful pursuit of personal goals and adaptability to changes in the environment. This literature aims to determine the study of the psychological well-being philosophy of adolescent social media users based on self-regulation.Methods: This literature study was conducted through a search for scientific publications ranging from 2018-2022. The databases used are PubMed, Science Direct, and ProQuest. The literature search was carried out according to topics with four groups of keywords based on Medical Subject Heading (MeSH) and combined with Boolean operators AND, OR and NOT, keywords Self-regulation AND mental wellbeing AND social media AND adolescence.Results: A study of the psychological well-being of adolescent social media users based on self-regulation based on ontology, epistemology, and axiology studies. Self-regulation is a philosophy that emphasizes the dynamic process that directs the behavior of a teenager towards the desired final state and adapts to changes that occur in the surrounding environment. The adaptation process is carried out as a form of self-regulation of the positive and negative impacts of using social media on adolescents with a motivational approach and avoidance system. The approach motivation system is carried out if it provides positive aspects in social media. While avoidance motivation is carried out if it has a negative impact in the form of low self-esteem, depression, and body image disturbances as a result of social comparisons made by teenagers when they see other people's posts.Conclusion: The concept of psychological well-being of adolescent social media users based on self-regulation is beneficial for parents to improve the parenting pattern of adolescent children. Good parenting is needed in understanding the positive and negative impacts of using social media and reducing externalization problems in adolescents.

In this paper, the columnar supramolecular aggregates of photosensitive star-shaped azobenzenes with benzene-1,3,5-tricarboxamide core and azobenzene arms are analysed theoretically applying a combination of computer simulation techniques. Without a light stimulus, the trans-stars build one-dimensional columns of stacked molecules during the first stage of the noncovalent association. These columnar aggregates represent the structural elements of more complex experimentally observed morphologies -- fibers, spheres, gels and others. Upon UV light exposure, the azobenzene arms isomerise from thermodynamically stable planar trans- to a metastable kinked cis-state influencing the aggregate morphology. Here, we determine the most favourable mutual orientations of the \textit{trans}-stars in the stack in terms of (i) the pi-pi distance between the cores lengthwise the aggregate, (ii) the star slipped displacements and (iii) the rotation promoting the helical twist and chirality of the aggregate by calculating the binding energy diagrams using density functional theory. The model predictions are further compared with available experimental data. The intermolecular forces responsible for the stability of the stacks made of trans-azobenzene stars in crystals are quantified using Hirshfeld surface analysis. Finally, to characterize the self-assembly mechanism of such stars in solution, we calculate the hydrogen bond lengths, the normalized dipole moment and the binding energies as the functions of the columnar length using molecular dynamics trajectories, and conclude about the cooperative nature of this process.

In the author's opinion, many global problems that face humanity - in the fields of education, medicine, management etc can be tackled more effectively if the cyclic nature of self-reproducing systems – including living beings – is taken into account. Summarizing the main physiological findings of the last decades on "adaptation reactions", one can very roughly say that the way of action which is effective in the sense of productive activity of people happens at the same time to be healthy, and it gives the participants of the process the feeling of happiness. The present paper represents a very short overview of the contemporary concepts of the adaptation reactions based on the fundamental understanding of their cyclic nature due to general properties of self-reproducing systems. One interesting feature of self-reproduction cycles is its first "phase of orientation" which was not discussed in detail in the past but plays a key role in the whole cycle.

Body Expression (BE) has been defined in the past decades as a discipline within Physical Education (PE) with very particular characteristics and a strong emotional component. In this study, a programme of this discipline was applied to university Physical Activity and Sports Sciences (PASS) students from six consecutive academic years: three prior to and three during the pandemic. A pre-post design was used to determine how the BE programme affected the university students' self-concept (SC). To do so, a questionnaire with a multidimensional approach to this construct was administered, whose dimensions were closely related to the BE programme's characteristics. The results revealed significant improvements in the final SC, compared to the initial SC. Men reported lower SC values than women before the programme implementation, but higher at the end. Therefore, the change was larger in men, so the programme may have had an equalising effect between groups. It was also verified that the pandemic had particularly affected women.

This paper, which is one of the few in the world dealing with this topic, presented the psychologist's work based on the concepts of mentalization and internal working models (IWMs) of attachment, with an adolescent girl who was prone to nonsuicidal self-injury. Gaga, a student in the first grade of high school, had visible scars from cutting her hands on the inner sides of both forearms. Gaga told the psychologist that her mother believes that this is an attempt to draw attention to her problems, and even a suicide attempt. Together with Gaga, the psychologist made a formulation of her mental difficulties. The main aim of the psychologist's work with Gaga was to control unpleasant impulses and emotions, so as to eliminate self-injury. This aim has been achieved through three global tasks: 1) that Gaga, in the relationship with the psychologist, builds her IWMs as positive, so that she can see herself as a person who is worthy of the love and support of close people; 2) to develop a stable capacity for mentalization; 3) to apply this acquired skills in the interpretation of her affective experiences. The mentalizing approach in working with Gaga was based on an attitude of emotional warmth, acceptance and authentic interest in her inner world. The psychologist's work with Gaga led to her better self-control, which resulted in the cessation of her self-injury. In her work with a psychologist, Gaga acquired positive IWMs, which she transferred into other significant interpersonal relationships.

The critical changes in physical appearance during adolescence can considerably influence the self-appraisal of body image. The purpose of this study is to analyze body self-image gender differences in Mediterranean adolescents, and his relationships to the anthropometric characteristics of this population in different phases of the adolescence. Participants were 809 Mediterranean teenagers (396 females) aged 11 to 17. A relative low prevalence of dissatisfaction with body image was observed among healthy urban Mediterranean adolescents (boys 17.3%; girls 22.7%). Girls showed statistically significantly higher mean BSQ scores than boys (M = 61.7, SD = 26.6 versus M = 56.3, SD = 27.1; p < 0.001). Girls in the late adolescence were more often classified as being dissatisfied (31%) in comparison to those in the early adolescent group (19.1%; p < 0.05). There was a good correlation of BSQ scores with all the anthropometric variables in males but not in females.

Glass and ceramics have a fundamental and crucial role in our lives due to their properties and aesthetic decoration. However, they create serious environmental problems, mainly due to their high occupation of landfills and harmful emissions. Both wastes could be utilized to reduce the natural resources' adverse environmental effects and exhaustion. With increasing environmental concerns to reduce solid waste as much as possible, the concrete industry has adopted several methods to achieve this goal. Hence this study examines the performance of self-compacted concrete (SCC) utilizing various percentages of recycled waste materials such as those deposited from glass and ceramic industries. The idea of utilizing recycled waste materials in concrete manufacturing has gained massive attention due to their impressive results in rheological and mechanical state. Recycled glass (RG) and ceramic waste powder (CWP) were utilized to replace fine aggregate and cement, respectively. Five mixes were designed, including the control mix, and the other four mixes with different dosages of RG and CWP as fine aggregate and cement replacement ranging between 5 to 25%. Mixes were tested for both rheological and mechanical properties to evaluate their compilment with SCC requirements as per codes and guidelines. The results revealed that 20%CWP or less as cement replacement and 10% or less of RG as fine aggregate replacement would provide suitable rheological properties along with mechanical ones. Utilizing recycled glass and ceramic waste powder provides strength like the mix designed with natural resources, which helps us structure economically and environmentally friendly.

This paper studies the flexural behavior of the bridge deck link slabs made with the Polyvinyl Alcohol-Strain Hardening Cementitious Composites (PVA-SHCC). Tensile and flexural properties of the PVA-SHCC with four volume fractions, i.e., 0%, 1%, 1.5%, and 2%, were evaluated first. Next, using the similarity theory, composite models with a geometric similarity ratio of 1: 5 were designed to represent the bridge deck with the link slabs. The models considered three materials for link slabs, including concrete, cement mortar and self-compacting PVA-SHCC; and two different curing ages at 7 and 56 days. Bending tests were performed to investigate the flexural behavior of the models. Based on the fractal theory, cracking characteristics of the models with different types of link slabs were compared, and the relationship between Df and the flexural behavior of the models were studied. Numerical models were built to correlate with the results from the bending tests. It is illustrated that the flexural behavior of the self-compacting PVA-SHCC link slab is better than that of concrete and cement mortar link slabs, where the crack initiation and propagation can be postponed.

Self-healing ceramic composites are promising smart materials for high-temperature applications. To better understand their behaviors under service conditions, numerous studies have been performed both experimentally and numerically, and kinetics parameters such as activation energy and frequency factor are reported to be indispensable for investigating healing phenomena. Here, we propose a method for determining the kinetic parameters of self-healing ceramic composites based on the oxidation kinetics model of strength recovery. These parameters are determined by an optimization method using experimental strength recovery data under various healing temperatures and times and microstructural features on the fractured surfaces. Alumina and mullite matrix-based self-healing ceramic composites, such as Al2O3/SiC, Al2O3/TiC, Al2O3/Ti2AlC (MAX phase), and mullite/SiC, were selected as target materials. The theoretical strength recovery behaviors of the cracked specimens obtained from the determined kinetic parameters were compared with the experimental results. The determined parameters are within the previously reported range, and the predicted strength recovery behaviors are reasonably agreed with the experimental values. The proposed method can also be applied to other self-healing ceramics with matrices reinforced with different healing agents to evaluate oxidation rate, crack healing rate, and theoretical strength recovery behaviors for designing self-healing materials used in high temperature applications. Furthermore, the healing ability of composites can be fairly discussed regardless of the type of strength recovery test.

Building on a framework of risk transmission to children of depressed parents, the present study investigated the associations between parents’ self-compassion, parent’s depressive symptoms, and child adjustment. A total 189 Chinese parents (101 mothers) whose children were 2-8 years old were recruited to complete a questionnaire, including measures of self-compassion, depressive symptoms and children’s prosocial behavior, internalizing problems, and externalizing problems. Findings indicated mediation effects, in that parents’ depressive symptoms mediated the associ-ation between their self-compassion and child adjustment outcomes, namely children’s internal-izing and externalizing problems, after controlling the effects of monthly family income, child gender, and parent gender. Competing hypothesis suggested that parents’ self-compassion did not moderate between parents’ depressive symptoms and child adjustment outcomes. Hence, the association between parental depressive symptoms and child adjustment was not dependent on the level of parents’ self-compassion. As an implication, researchers and practitioners should be made aware of the protective role of parents’ self-compassion in the family context.

The resonance spectra of neutral silver indicate self-absorption for the studied Ag I lines at the wavelengths of 327.9 nm and 338.2 nm. The center dip is associated with self-reversal due to self-absorption in the plasma. The Q-switched radiation of 355 nm, 532 nm, or 1064 nm from a Nd:YAG laser device generates the plasma at the surface of silver nano-material targets, with experiments conducted in standard ambient temperature and pressure laboratory air. Procedures for recovery of the spectral line shapes confirm that over and above the effects of self-reversal, line shape distortion are important in the analysis. The work discusses parameters describing self-absorption when using fluence levels of 2 to 33 J/cm² to generate the plasma. Furthermore, subsidiary calibration efforts that utilize the hydrogen alpha line of the Balmer series show that the Ag I lines at 827.35 nm and 768.7 nm are optically thin.

The phenomenon of dissipative self-organization is studied on the example of time-crystal networks. Particular attention was given to transient processes, attractor topologies, phase transitions, and asymptotic stability. New concepts were introduced, including topological phases, spinorial states, and bond flavors. Concepts such as ground states, chemical potentials, elastic forces, temperature, and statistical distributions were endowed with a new meaning associated with asymptotic stability. Phenomena usually attributed exclusively to quantum physics have been shown to occur in this essentially classical environment. They coexist with, and in some cases, such as charge quantization, are related to the phenomenon of time dilation. The approach was applied to model vacuum self-organization. We have shown that under the ac-tion of competing forces, such as gravity and antigravity, a cascade of phase transitions can transform an unorganized vacuum into phases in which interactions, fields and waves resemble electromagnetic, weak, and strong, and their elements can be used as building blocks for prototype particles. In addition, some interrelation field parameters and probabilities of particle transmutations were calculated, which are not predicted by the standard model. The results are consistent with the experiment. The presented material and methodology may be of interest for studying self-organization in different environments.

Nanostructured anodic oxide layers on an FeAl₃ intermetallic alloy were prepared by two-step anodization in 20 wt.% H2SO4 at 0°C. The voltage range was 10.0 – 22.5 V with a step of 2.5 V. The structural and morphological characterizations of the received anodic oxide layers were performed by FE-SEM. Therefore, the formed anodic oxide was found to be highly porous with a high surface area, as indicated by the FE-SEM studies. It has been shown that the morphology of fabricated nanoporous oxide layers is strongly affected by the anodization potential. The oxide growth rate first increased slowly (from 0.010 μm/s for 10 V to 0.02 μm/s for 15 V) and then very rapidly (from 0.04 μm/s for 17.5 V up to 0.13 μm/s for 22.5 V). The same trend was observed for the change in the oxide thickness. Moreover, for all investigated anodizing voltages, the structural features of the anodic oxide layers, such as the pore diameter and interpore distance, increase with increasing anodizing potential. The obtained anodic oxide layer was identified as a crystalline FeAl₂O₄, Fe₂O₃ and Al₂O₃ oxide mixture.

For many engineering applications it is sufficient to use the concept of simple materials. However, higher gradients of the kinematic variables are taken into account to model materials with internal length scales as well as to describe localization effects using gradient theories in finite plasticity or fluid mechanics. In many approaches length scale parameter have been introduced that are related to a specific micro structure. An alternative approach is possible, if a thermodynamically consistent framework is used for material modelling as shown in the present contribution. However, even if sophisticated and thermodynamically consistent material models can be established there are still not yet standard experiments to determine higher order material constants. In order to contribute to this ongoing discussion system identification based on the method of self-adaptive filtering is proposed in this paper. To evaluate the effectiveness of this approach it has been applied to second-order gradient materials considering longitudinal vibrations. Based on thermodynamically consistent models that have been solved numerically it has been possible to prove that system identification based on self-adaptive filtering can be used effectively for both narrow-band and broadband signals in the field of second-order gradient materials. It has also been found that the differences identified for simple materials and gradient materials allow for condition monitoring and detection of gradient effects in the material behavior.

Automatic ship detection provides an essential function towards maritime domain awareness for security or economic monitoring purposes. This work presents an approach for training a deep learning ship detector in Sentinel-2 multispectral images with few labeled examples. We design a network architecture for detecting ships with a backbone that can be pre-trained separately. By using Self Supervised Learning, an emerging unsupervised training procedure, we learn good features on Sentinel-2 images, without requiring labeling, to initialize our network’s backbone. The full network is then fine-tuned to learn to detect ships in challenging settings. We evaluated this approach versus pre-training on ImageNet and versus a classical image processing pipeline. We examined the impact of variations in the self-supervised learning step and we show that in the few-shot learning setting self-supervised pre-training achieves better results than ImageNet pre-training. When enough training data is available, our self-supervised approach is as good as ImageNet pre-training. We conclude that a better design of the self-supervised task and bigger non-annotated dataset sizes can lead to surpassing ImageNet pre-training performance without any annotation costs.

Social robots may become an innovative means to improve the well-being of individuals. Earlier research showed that people easily self-disclose to a social robot even in cases where that was unintended by the designers. We report on an experiment of self-disclosing in a diary journal or to a social robot after negative mood induction. The off-the-shelf robot was complemented with our inhouse developed AI chatbot and could talk about ‘hot topics’ after having it trained with thousands of entries on a complaint website. We found that people who felt strong negativity after being exposed to shocking video footage benefited the most from talking to our robot rather than writing down their feelings. For people less affected by the treatment, a confidential robot chat or writing a journal page did not differ significantly. We discuss emotion theory in relation to robotics and possibilities for an application in design (the emoji-enriched ‘talking stress ball’). We also underline the importance of - otherwise disregarded - outliers in a data set that is of a therapeutic nature.

Though Cyber Physical Systems (CPS) become very popular in last the decade, dependability of CPS is still a critical issue and related survey is rare. We try to spell out the jigsaw of technologies and figure out the technical trends of dependable self-managing CPS. This survey first recalls the motivation and the similar concepts. By analyzing four generic architectures, we summarize the common characteristics and related assurance technologies, and propose a more generic environment-in-loop processing flow of CPS and a formal interaction flow between physical space and cyber space. Further, the similarity between correctness and dependability is formally analyzed and the new five research questions of dependable self-managing CPS are presented. Then we review the critical technologies and related correctness verification & validation (V&V) methods, the architectures for dependable self-managing CPS. Further, the detail dependability management and V&V technologies are surveyed, which covers the areas of running-time fault management methods and whole life cycle V&V technologies, maintenance and available tool sets. For holistic CPS development, Modeling techniques and MDE (model driven engineering) based V&V methods are analyzed in detail. Then we complete the jigsaw of technologies and figure out the missing part. Further, we propose the technical challenges and the further direction. To our best knowledge, this is the first comprehensive survey on dependable self-managing CPS development and evaluation.

Background: This study aimed to develop and evaluate a dietary self-care promotion program for hemodialysis patients based on Hurley's self-efficacy model. Methods: The needs of hemodialysis patients were identified, and an online community-based dietary self-care promotion program was developed with expert evaluations. 44 hemodialysis patients were randomly assigned to an experimental group (n=22) and a control group (n=22). The program was applied to the experimental group for four weeks. Before and after the intervention, as well as four weeks after the intervention, dietary self-efficacy, dietary self-care behavior, interdialytic weight gain, serum phosphorus, and serum potassium were assessed in both groups. Results: Significant differences over time and between groups were observed in dietary self-efficacy, interdialytic weight gain, serum phosphorus, and serum potassium. The interaction between time and group was also significant. While no significant differences were found over time in dietary self-care behavior, significant group differences and interaction effects between time and group were identified. Conclusions: The results indicate that the dietary self-care promotion program using an online community for hemodialysis patients is more effective in enhancing dietary self-efficacy and dietary self-care behavior compared to conventional treatment. This suggests the clinical applicability of the proposed dietary self-care promotion program.

Recently, several research groups have reported on anomalous enhancement of the self-field critical currents, Ic(sf,T), at low temperatures in superconductor/Dirac-cone material/superconductor (S/DCM/S) junctions. Some papers attributed the enhancement to the low-energy Andreev bound states arising from winding of the electronic wave function around DCM. In this paper, Ic(sf,T) in S/DCM/S junctions have been analyzed by two approaches: modified Ambegaokar-Baratoff and ballistic Titov-Beenakker models. It is shown that the ballistic model is an inadequate tool to analyze experimental data from S/DCM/S junctions. The primary mechanism for limiting superconducting current in S/DCM/S junctions is different from the conventional view that the latter is the maximum value within the order parameter phase variation. Thus, there is a need to develop a new model for self-field critical currents in S/DCM/S systems.

The study explores how different dimensions of perfectionism influence psychological well-being (PWB) in emerging adults. Literature has deepened the relationships between maladaptive perfectionism (e.g., excessive self-criticism, perceived discrepancy from the standards) and low PWB. Less is known about whether and how adaptive perfectionism (e.g., pursuing personal standards) relates to PWB. Secondly, the study has investigated whether self-compassion (i.e., self-benevolence, seeing personal imperfections as a common condition) may mediate the relationships between adaptive/maladaptive perfectionism and PWB. Participants (N=217, 18-35 y. o.) completed self-report questionnaires measuring: adaptive/maladaptive perfectionism (Almost Perfect Scale-Revised, APS-R: high standards and order/discrepancy, respectively), PWB, and self-compassion (SCS). Adaptive perfectionism resulted associated with PWB, particularly higher presence of purpose in life, environmental mastery, self-acceptance, and personal growth. Conversely, discrepancy resulted the most robust predictor of low PWB (β=-.68), followed by high standards with a positive direction (β=.23; Rc²=.514, p&lt;.001). A strong negative association emerged between discrepancy and SCS (r=-.67, p&lt;.001). A mediation analysis shows that self-compassion has an indirect effect reducing the strength of the relationship between discrepancy and low PWB. Results suggest focusing on self-compassion as a buffer factor that reduces the negative impact of maladaptive perfectionism on psychological well-being. Implications for education and health psychology are discussed.

Objective: The study investigated the benefit of practicing the art of bonsai and the well-being of practitioners. The art promotes relaxation, focus and art therapy that can have personal and emotional value in a self-help setting. When the bonsai tree is used as a healing object, it may improve the ability of the bonsai practitioner to adapt to adverse and stressful life events, such as the present global COVID-19 pandemic. Method: International bonsai artists (n = 255) participated in a study that examined the effect their bonsai had on their mental well-being. Semi-structured interviews were conducted with bonsai artists answering the question: “How has bonsai helped you?”. Results: Most participants acknowledged that being able to take care of their bonsais affected their mood in a positive manner. Discussion: Although the participants did not report overall improved mental health, participants expressed an improvement in their mood when being able to work on a bonsai tree. Conclusion: These findings are significant in that it can be useful in as a preventative and restorative manner in the mental well-being of people who practice the art.

Background: The aim of the present work is the elaboration of a systematic review of existing research on physical fitness, self-efficacy for physical exercise, and quality of life in adulthood. Method: Using the PRISMA statement guidelines, and based on the findings in 396 articles, the final sample was composed of 31 articles, which were reviewed to show whether self-efficacy has previously been studied as a mediator in the relationship between physical fitness and quality of life in adulthood. Results: The results indicate that little research exists in relation to healthy, populations with the majority being people with pathology. Physical fitness should be considered as a fundamental aspect in determining the functional capacity of the person. Conclusions: We discuss the need to investigate the mediation of self-efficacy in relation to the value of physical activity on quality of life and well-being in the healthy adult population in adult life.

Abstract: Arterial hypertension is the main preventable risk factor for premature death and stroke worldwide and anxiety is a real public health problem. Stress is the common denominator for both cases. In the last 3 years, the aggressive exposure of the population to negative emotions (fear of disease in a pandemic, fear of war, financial instability) was the trigger factor. The psycho-neuro-endocrine mechanisms include the hypothalamic-pituitary-adrenal axis and induce sympathetic-parasympathetic imbalance, hypercortisolemia, endothelial dysfunction, oxidative stress, inflammation, cytokine growth, and atherosclerosis. The individual’s vulnerability to stress depends on many factors, but the key role in the perception of stress belongs to immunogenic personality traits. Among them, self-efficacy is a protective factor against stress. Our research aimed to evaluate the connections between psycho-emotional factors and hypertension, using psychometric tests, to identify vulnerability to stress, perceived stress level, anxiety, self-efficacy, and psychobehavioral type, for 215 patients, 104 hypertensive and 111 non-hypertensive patients. The results of the study confirmed that there is a statistically significant difference, which requires psychological screening measures to identify patients vulnerable to stress, as well as medical education courses for doctors in the field of psychology.

I present an experimental paradigm to explore the interpersonal dynamics generating a collective mind. I hypothesized that collective organization is based on dual interpersonal modes: (1) symmetrical and (2) anti‑symmetrical. I specified the geometric topology of these modes by detecting the spatiotemporal patterns that embed cooperative agents in a three‑dimensional matrix. I found that the symmetrical mode is executed automatically and without guidance. Conversely, the anti‑symmetrical mode required explicit direction and recruited attention for execution. I demonstrate that self‑other mirror‑symmetry stabilized group dynamics, enabled fast and efficient symmetrical imitation that optimized information transmission, whereas anti‑symmetrical imitation was comparatively slow, inefficient, and unstable. I determined that the anti‑symmetrical mode spontaneously transitioned to the symmetrical mode under perturbations. Crucially, this renormalization mechanism never transitioned from symmetrical to anti‑symmetrical. These self-organizing dynamics speak to interpersonal symmetry‑breaking. In the present work, spontaneous group choice mandated that agents synchronize cooperative cycles in symmetrical space under internal or external perturbations. I provide examples to illustrate that this self-regulating pullback attractor manifests in invertebrates and vertebrates alike. I conclude by suggesting that inter‑agent symmetry provides the social stability manifold through which attention-driven interactions enable intrapersonal and interpersonal change.

In today's world it is very much important to maintain the security of information and its risks. The biometric-based techniques are very much useful in these problems. Among the several kinds of biometric-based technique, face detection is much complex and much more important. Due to the age and several other problems, a human face structure changes over time, again a human has lots of expressions. Sometimes due to the lighting condition or the variation of the angle of an input device, the pattern of a human face structure also changed. As a result, the face cannot be detected properly. In this paper, a method is proposed that can detect the human faces both automatically and manually very efficiently. In manual mode, a user can select the input faces referred by the system according to their choice. In automated mode, the system detected all possible face areas using the Kohonen Self-Organizing Feature Map technique. This method reduced the complex color image into a vector quantized image with desired colors. Then a color segmentation technique is used to detect the possible face skin areas from the vector quantized image. Then the Histogram Oriented Gradient technique used to detect the feature from the faces and K-Nearest Neighbour Classifier is used to compare both face images detected by the two modes. The automated method prosed better accuracy than the manual method.

Controlling surface-protein interaction during wastewater treatment is the key motivation for developing functionally modified membranes. A new biocatalytic thermo-responsive poly(vinylidene fluoride)(PVDF)/nylon-6,6/poly(N-isopropylacrylamide)(PNIPAAm) ultrafiltration membrane was fabricated to achieve dual functionality of protein-digestion and thermo-responsive self-cleaning. The PVDF/nylon-6,6/PNIPAAm composite membranes were constructed by integrating a hydrophobic PVDF cast layer and hydrophilic nylon-6,6/PNIPAAm nanofiber layer where trypsin enzymes were covalently immobilized. The immobilization density of enzymes on the membrane surface decreased with increasing PNIPAAm concentration, due to the decreased number of amine functional sites. Through a ultrafiltration study using a model solution containing BSA/NaCl/CaCl₂, the PNIPAAm containing biocatalytic membranes demonstrated a combined effect of enzymatic and thermo-switchable self-cleaning. The membrane without PNIPAAm revealed superior fouling resistance and self-cleaning with an R_PD of 22%, compared to membranes with 2 and 4 wt% PNIPAAm with 26% and 33% R_PD, respectively, after an intermediate temperature cleaning at 50°C, indicating that higher enzyme density offers more efficient self-cleaning than the combined effect of enzyme and PNIPAAm at low concentration. The conformational volume phase transition of PNIPAAm did not affect the stability of immobilized trypsin on membrane surface. Such novel surface engineering design offer a promising route to severe surface-protein contamination remediation in food and wastewater applications.

This study uses explainable artificial intelligence to analyze major predictors of poor self-rated health, dementia and their comorbidity, which include various aspects of social support. Data came from the Korean Longitudinal Study of Ageing (2016-2018), with 5527 participants aged 56 or more. The dependent variables were: (1) poor self-rated health (SRH) with 5 categories (very good, good, middle, poor, very poor); (2) dementia (no, yes); and (3) their comorbidity with 4 categories (SRH very good, good or middle, dementia no; SRH very good, good or middle, dementia yes; SRH poor or very poor, dementia no; SRH poor or very poor, dementia yes). The 49 demographic, socioeconomic and health-related predictors were included. The accuracy and area under the receiver operating characteristic curve (AUC) were compared for logistic regression and the random forest. Logistic regression and the random forest registered similar AUCs with the range of 0.80-0.87. Based on random forest variable importance, 18 out of top-20 predictors were identical for SRH, dementia and their comorbidity: previous SRH, life satisfaction - health, age, body mass index, income, chronic diseases, life satisfaction - economic, life satisfaction - overall, grandchildren alive, friendship meeting, brothers/sisters alive, class identity, children alive, social activity - friendship, education, children in weekly contact, religion and drinker. However, some variations were found among the three dependent variables, i.e., previous SRH for comorbidity (1st) and SRH (1st) compared to dementia (11th), grandchildren alive for SRH (6th) and dementia (4th) compared to comorbidity (9th), chronic diseases for comorbidity (6th) compared to SRH (10th) and dementia (10th). In terms of Shapley Additive Explanation (SHAP) values, the probability of dementia is expected to decrease by 5.57% in case a predictor grandchildren alive is included to the model. This study highlights the importance of social support for the prediction of poor self-rated health, dementia and their comorbidity. Specifically, the promotion of family support and friendship activity for elders would be vital for the prevention and management of their self-rated health and dementia.

Machine learning has become an increasingly ubiquitous technology, as big data continues to inform and influence everyday life and decision-making. Currently in healthcare, as well as in most other industries, the two most prevalent machine learning paradigms are supervised learning and transfer learning. Both practices rely on large-scale, manually annotated datasets to train increasingly complex models. However, the requirement of data to be manually labeled leaves an excess of unused, unlabeled data available in both public and private data repositories. Self-supervised learning (SSL) is a growing area of machine learning that has the ability to take advantage of unlabeled data. Contrary to other machine learning paradigms, SSL algorithms create artificial supervisory signals from unlabeled data and pretrain algorithms on these signals. The aim of this review is two-fold: firstly, we provide a formal definition of SSL, divide SSL algorithms into their four unique subsets, and review the state-of-the-art published in each of those subsets between the years of 2014-2020. Second, this work surveys recent SSL algorithms published in healthcare, in order to provide medical experts with a clearer picture of how they can integrate SSL into their research, with the objective of leveraging unlabeled data.

In this work, we have studied the propagation of ultrasonic waves of lysozyme solutions characterized by different degrees of aggregation and networking. The experimental investigation has been performed by means of the Transient Grating (TG) spectroscopy as a function of temperature; this technique enables to measure the ultrasonic acoustic proprieties over a wide time window, ranging from nanoseconds to milliseconds. The fitting of the measured TG signal allows the extraction of several dynamic properties, here we focused on the speed and the damping rate of sound. The temperature variation induces in the lysozyme solutions a series of processes: protein folding-unfolding, aggregation and sol-gel transition. Our TG investigation shows how these self-assembling phenomena modulate the sound propagation, affecting both the velocity and the damping rate of the ultrasonic waves. In particular, the damping of ultrasonic acoustic waves proves to be a dynamic property very sensitive to the protein conformational rearrangements and aggregation processes.

Background: Since the beginning of the 20th century, the importance of creating healthy work environments and promoting the health of workers in the healthcare sector to create Healthy and Resilient Organizations has been emphasized. In this context, self-esteem is an essential construct which influences health and healthy life styles, and therefore, the general wellbeing of nurses. The objective of this study was to analyze the mediating role of reasons for exercising in the effect that self-esteem has on uncontrolled eating by nursing professionals. Methods: The sample was made up of 1094 nurses who were administered the Rosenberg General Self-esteem Scale, the Goal Content for Exercise Questionnaire and the Three-Factor Eating Questionnaire-R18. Results: Bivariate correlation analysis and multiple mediation analysis showed that self-esteem has direct and indirect effects on uncontrolled eating. More so, self-esteem predicts doing physical exercise to improve one’s image, recognition and social affiliation, although the effects on uncontrolled eating were only significant through image. Conclusions: The results have important practical implications in the framework of Positive Occupational Health Psychology (POHP) as it emphasizes self-esteem, physical exercise and eating as essential aspects of the health and wellbeing of employees in the healthcare sector, highlighting the importance of creating organizations committed to promoting the psychosocial health of their workers.

Positive Occupational Health Psychology (POHP) examines the mechanisms that promote workers’ health and wellbeing, in addition to risk factors arising from work activity. The aim of this study was to analyze the mediating role of perceived stress in the effect that self-efficacy has on engagement in nurses. The sample comprised 1777 currently working nurses. We administered the Utrecht Work Engagement Scale (UWES), the Perceived Stress Questionnaire and the General Self-Efficacy Scale. Following bivariate correlational analysis, multiple linear regression analysis, and simple and multiple mediation analysis the results showed Self-efficacy to be a powerful personal resource that positively predicts employees’ engagement, although the effect diminishes when there are mediating variables of stress. We found differences in the way the different aspects of stress mediated the relationship between Self-efficacy and the engagement dimensions. “Energy–joy” was the strongest mediating variable for all of the engagement dimensions, and this, together with “harassment–social acceptance” dampened the effect of Self-efficacy on vigor and dedication, whereas “Overload” was only a mediator for dedication. Because nurses work in a stressful environment, risk factor arising from work activity, hospital management should design interventions to enhance their workers’ personal resources and improve personal and organizational wellbeing.

Intranasal (i.n.) administration became an alternative strategy to bypass the blood-brain barrier and improve drug bioavailability in the brain. The main goal of this work was to preliminarily study the biodistribution of mixed amphiphilic mucoadhesive nanoparticles made of chitosan-g-poly(methyl methacrylate) and poly(vinyl alcohol)-g-poly(methyl methacrylate) and ionotropically crosslinked with sodium tripolyphosphate in the brain after intravenous (i.v.) and i.n. administration to Hsd:ICR mice. After i.v. administration, the highest nanoparticle accumulation was detected in the liver, among other peripheral organs. After i.n. administration of a 10-times smaller nanoparticle dose, the accumulation of the nanoparticles in off-target organs was much lower than after i.v. injection. In particular, the accumulation of the nanoparticles in the liver was 20 times lower than by i.v. When brains were analyzed separately, intravenously administered nanoparticles accumulated mainly in the “top” brain, reaching a maximum after 1h. Conversely, in i.n. administration, nanoparticles were detected in the “bottom” brain and the head (maximum reached after 2 h) owing to their retention in the nasal mucosa and could serve as a reservoir from which the drug is released and transported to the brain over time. Overall results indicate that i.n. nanoparticles reach similar brain bioavailability, though with a 10-fold smaller dose, and accumulate in off-target organs to a more limited extent and only after redistribution through the systemic circulation. At the same time, both administration routes seem to lead to differential accumulation in brain regions and thus, they could be beneficial in the treatment of different medical conditions.

This paper deals with a method of calculating the self and mutual inductances of various air coils located arbitrarily in space. Known elementary solutions (the Biot-Savart formulas) were used to determine the magnetic field of infinitely thin current loops and infinitely thin wires of finite length linking magnetically other coils. Unlike commonly used algorithms, these elementary solutions were not extensively transformed analytically but were used to perform calculations by direct numerical integration. This enabled very quick and accurate obtaining of the self-inductance values as well as determining the dependence of mutual inductances on the position of both coils. This method allows analysis of different coil configurations (misaligned coils, inclined to each other, etc.) that other methods do not cover. It also enables the determination of the forces acting on the coils, as well as the calculation of the magnetic field distribution from any coil configuration. The obtained results were compared with those presented by other authors.

The current article examined stoma self-care and health-related quality of life in patients with drainage enterostomy, describe clinical and sociodemographic variables and analyze the relations between all of them. Trained interviewers collected data using a standardized form that queried sociodemographic and clinical variables, collected from the electronic medical record, in addition to the Specific Self-Care for Ostomized Patients Questionnaire (CAESPO) and Stoma Quality of life (S-QoL) from January 2016 to January 2017. This was a multicenter, cross sectional study conducted in four hospitals of the province of Castellon (Spain) where 120 participants were studied. Significant differences were found in Self Care according to sex (p = .043); married participants show higher score (p < .01); also, significant differences according to work activity were observed (p < .01). Regarding the clinical variables, differences were observed according to the autonomy of care, the presence of complications in the stoma, the use of irrigation and the type of effluent (p < .01). We can highlight the importance of the skills related to self-care by ostomized patients has for a good level of quality of life related to health. In this learning process, the figure of the stoma therapist plays a very important role.

Development of the self-cleaning and anti-fogging superhydrophobic coating for aluminum surfaces which is durable in the aggressive conditions has raised tremendous interest in materials science. In this work, by employing chemical etching technique with mixture of hydrochloric and nitric acid, followed by passivation with lauric acid, superhydrophobic aluminum surface was synthesized. The surface morphology analysis reveals the presence of rough microstructures on coated aluminium surface. Superhydrophobicity with water contact angle of 170 ± 3.9° and sliding angle of 4 ± 0.5° is achieved. Surface bounces off the high speed water jet, indicating excellent water-repellent nature of coating. It is also continuously floated on water surface for several weeks, showing excellent buoyancy nature. Additionally, coating maintains its superhydrophobicity after undergoing 100 cycles of adhesive tape peeling test. Its superhydrophobic nature withstands 90° and 180° bending, and repeated folding and de-folding. Coating exhibits the excellent self-cleaning property. In low temperature condensation test, almost no accumulation of water drops on the surface, showing the excellent anti-fogging property of coating. This approach can be applied to any size and shape of aluminium surface and hence has great industrial applications.

In the present work, we designed a mild strategy to make Cu₂(OH)PO₄ (CHP) nanoparticles on cotton fabrics (CFs) to achieve multi-functionalities. The phytic acid (IP6) assisted method was employed to synthesize nanoparticles (CHP-IP6). Under Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) as well as thermogravimetric analysis (TGA), we characterized the coated cotton fabrics. The CHP-IP6 treated fabrics showed prominent photocatalytic activity, excellent photocatalytic stability and thorough discoloration of methylene blue (MB) stain under sunlight irradiation.

Good health and the promotion of well-being for all is the third of the 17 Global Goals included in the 2030 Agenda for Sustainable Development. Contributing to this goal, the current study aimed to examine the relationships between one kind of athletes’ well-being, namely state organic self-talk, with personality traits, and basic psychological need satisfaction and frustration within their sport. Athletes (N = 691; mean age 21.65) from a variety of individual (n = 270) and team sports (n = 421) completed a multisection questionnaire capturing the targeted variables. Three-step hierarchical regression analyses revealed that: In step 1, all personality traits were to some extent a significant predictor of athletes’ organic, spontaneous self-talk dimensions and goal-directed self-talk functions. In step 2, need satisfaction significantly contributed to all spontaneous self-talk dimensions and goal-directed self-talk functions (except for creating functional deactivated states) over and above personality. Finally, in step 3, need frustration significantly contributed to negative spontaneous self-talk dimensions, and to all goal-directed self-talk functions (except for instruction) over and above personality and need satisfaction. Overall, our results indicate the importance of personality traits as personal antecedents, and perceptions of basic psychological need satisfaction and frustration as social-environmental antecedents, in shaping athletes’ state organic self-talk.

In recent decades, organizational research has given special attention to the mechanisms promoting the health and wellbeing of nursing professionals. In this context, self-esteem is a personal resource which influences wellbeing at work and psychological wellbeing of nurses. The purpose of this study was to analyze the mediating role of eating in the effect of sleep quality on self-esteem in nursing professionals. The sample of 1073 nurses were administered the Rosenberg General Self-Esteem Scale, the Pittsburgh Sleep Quality Index and the Three-Factor Eating Questionnaire-R18. The results show that poor sleep quality and type of eating directly and indirectly affect self-esteem. More so, poor sleep quality deteriorated self-esteem through emotional eating, and even though emotional eating facilitated disinhibited eating, this relationship had no significant effects on self-esteem. The findings of this study suggest that hospital management should implement employee health awareness programs on the importance of healthy sleep and design educational interventions for improving the quality of their diet.

Theoretical studies propose an association between family violence and low self-control in adolescence, yet empirical findings of this association are inconclusive. The aim of the present research was to systematically summarize available findings on the relation between family violence and self-control across adolescence. We included 27 studies with 143 effect sizes, representing more than 25,000 participants of eight countries from early to late adolescence. Applying a multi-level meta-analyses, taking dependency between effect sizes into account while retaining statistical power, we examined the magnitude and direction of the overall effect size. Additionally, we investigated whether theoretical moderators (e.g., age, gender, country), and methodological moderators (cross-sectional/longitudinal, informant) influenced the magnitude of the association between family violence and self-control. Our results revealed that family violence and self-control have a small to moderate significant negative association (r = -.191). This association did not vary across gender, country, and informants. The strength of the association, however, decreased with age and in longitudinal studies. This finding provides evidence that researchers and clinicians may expect low self-control in the wake of family violence, especially in early adolescence. Recommendations for future research in the area are discussed.

The rational fabrication of low-dimensional materials with a well-defined topology and functions is an incredibly important aspect of nanotechnology. In particular, the on-surface synthesis (OSS) methods based on the bottom-up approach enable facile construction of sophisticated molecular architectures unattainable by traditional methods of wet chemistry. Among such supramolecular constructs especially interesting are surface-supported metal-organic networks (SMONs), composed of low-coordinated metal atoms and π-aromatic bridging linkers differing in size, shape and functionalization scheme. In this work, the lattice Monte Carlo (MC) simulation technique was used to extract the chemical information encoded in a family of Y-shaped positional isomers coadsorbed with trivalent metal atoms on a flat metallic surface with (111) geometry. For this purpose the investigated tritopic molecules/metal atoms were carefully mapped on a triangular lattice as interconnected/isolated segments with appropriatelly embedded anisotropic interactions. Depending on the intramolecular distribution of active centers (functional groups) within the simulated molecular bricks, we observed the metal-directed self-assembly of two-dimensional (2D) openwork patterns, aperiodic mosaics and metal-organic ladders. The obtained theoretical findings could be especially relevant for the scanning tunneling microscopy (STM) experimentalists interested in a surface-assisted construction of complex nanomaterials stabilized by directional coordination bonds.

The nature of Artisanal mining in Ghana exposes its workers to various levels of health, safety and environmental (HSE) threats. These miners are mostly liable for their own HSE state at work. In an attempt to understand the HSE dynamics of artisanal miners, this study sought to assess the effect of HSE conditions on self-protection at work by artisanal goldminers in Ghana. A nested binary logistic regression model was fitted to a cross sectional survey of 500 artisanal goldminers while controlling for compositional and contextual factors. Of the HSE conditions, only health (OR= 1.653, p<0.001) and safety conditions (OR= 1.935, p<0.001) were robust in predicting self-protection in all three models. Goldminers who reported good health and safety conditions were more likely to fully protect themselves at work as compared to their counterparts who reported poor health and safety conditions. For compositional factors, female goldminers were 84% less likely to protect themselves. Miners who had senior high (OR= 1.759, p<0.001) or tertiary education (OR= 1.875, p<0.001) were more likely to protect themselves at work as compared to those with no formal education. Likewise, miners who undertook routine medical checkups (OR= 2.533, p<0.001) and the most experienced miners (OR= 2.734, p<0.001) were more likely to protect themselves at work. Counterintuitively, miners who earned more monthly income ($174 and above) were less likely to protect themselves. At the contextual level, miners who worked in non-production departments (OR= 2.001, p<0.001) and miners who worked in the medium scale subsector (OR= 5.311, p<0.001) were more likely to protect themselves at work. To increase consciousness of self-protection in artisanal mining, there is the need for a national dialogue on how to improve HSE conditions and in the absence of legislation, the complexities in managing HSE in the sector needs to be decoupled to achieve fair and standard HSE conditions as championed by the World Health Organization.

The purpose of this study is to examine the self-esteem levels of visually handicapped individuals who do sports and do’t do sports. There were 106 sportsmen and 94 persons with visual handicapped (200 in total) who participated in the research clubs in the province of Izmir. As the sub-problems, the relationship between the genders of participant who visually handicapped and not visually handicapped was investigated. The study consists of two parts. In the first part, the demographic characteristics of the participants were determined; in the second part Rosenberg Self Value scale consisting of 10 questions was used. Data were analyzed with SPSS 18.00 package program. T test, correlation analysis, descriptive statistics were applied to test hypotheses of the study. The research found that there is a significant difference between the self-esteem levels of individuals with and without visually handicapped sports (P <0.05). No statistically significant difference was found between the self-esteem levels of the sportsmen and the sportswomen (P> 0,05). There was no significant difference in the self-esteem levels of visually handicapped individuals who played individual sports and team sports (P> 0,05). As a result, it has been seen that sports have a positive effect on self-esteem in visually handicapped individuals and they contribute and hold to life more meaningful.

The COVID-19 pandemic has disrupted healthcare worldwide, potentially impacting disease management. This cross-sectional study assessed the influence of COVID-19 on diabetes self-management in 341 Saudis with type 2 diabetes using the Diabetes Self-Management Questionnaire (DSMQ). The DSMQ contains 16 items across 4 domains assessing glucose management, dietary control, physical activity, and healthcare use. Three additional items measured the perceived overall impact of COVID-19. Total DSMQ scores were significantly higher in patients aged &gt;60 years versus younger groups. Scores were significantly lower in patients diagnosed for 1-5 years versus longer durations. Patients on insulin had higher glucose management subscores than oral medication users. Overall, DSMQ scores were higher than the pre-pandemic Saudi population and Turkish post-pandemic findings. DSMQ results suggest that while COVID-19 negatively impacted some self-management domains, Saudi patients upheld relatively good diabetes control during the pandemic. Further research is warranted on specific barriers to optimize diabetes care during public health crises.

Medically underserved communities have limited access to effective disease management resources in the U.S. Mobile health applications (mHealth apps) offer patients a cost-effective way to monitor and self-manage their condition and to communicate with providers; however, current diabetes self-management apps have rarely included end-users from underserved communities in the design process. This research documents key stakeholder-driven design requirements for a diabetes self-management app for medically underserved patients. Semi-structured survey-interviews were carried out with 97 patients with diabetes and 11 healthcare providers from medically underserved counties in South Texas to elicit perspectives and preferences regarding a diabetes self-management app, and their beliefs regarding such an app’s usage and utility. Patients emphasized the need for accessible educational content and for quick access to guidance on regulating blood sugar, diet, and exercise and physical activity using multimedia rather than textual form. Healthcare providers indicated that glucose monitoring, educational content, and graphical visualization of diabetes data were among the top-rated app features. These findings suggest that specific design requirements for the underserved may improve the adoption, usability, and sustainability of such interventions. Designers should consider health literacy and numeracy, linguistic barriers, data visualization, data entry complexity, and information exchange capabilities.

For any molecule, network, or process of interest, to keep up with new publications on these, is becoming increasingly difficult. For many cellular processes, molecules and their interactions that need to be considered can be very large. Automated mining of publications can support large scale molecular interaction maps and database curation. Text mining and Natural Language Processing (NLP)-based techniques are finding their applications in mining the biological literature, handling problems such as Named Entity Recognition (NER) and Relationship Extraction (RE). Both rule-based and machine learning (ML)-based NLP approaches have been popular in this context, with multiple research and review articles examining the scope of such models in Biological Literature Mining (BLM). In this review article, we explore self-attention based models, a special type of neural network (NN)-based architectures that have recently revitalized the field of NLP, applied to biological texts. We cover self-attention models operating either at a sentence level or an abstract level, in the context of molecular interaction extraction, published from 2019 onwards. We conduct a comparative study of the models in terms of their architecture. Moreover, we also discuss some limitations in the field of BLM that identifies opportunities for the extraction of molecular interactions from biological text.

Background: This study consists of a brief psychological intervention, which uses the Self-Regulation Therapy (SRT, procedure based on suggestion and classical conditioning), to improve coping with stress and emotionality by reproducing the positive effects of illegal drugs: cannabis, cocaine, ecstasy. Method: 15 volunteers (8 males, 7 females), with a mean age of 24.67 (SD = 4.43), underwent intervention to improve their coping with stress and emotionality using SRT. They carried out pre- and post-intervention scores for 10 days and during a 4-week fol-low-up. The employed instruments were: COPE (Coping Skills Inventory) and PNAS (Positive and Negative Affect Schedule). Results: SRT was superior to non-intervention for the 4 coping strategies (2= .829, .453, .411 and .606) and for positive (2= .371) and negative emotionality (2= .419). An improvement in scores was evidenced in the follow-up scores compared to the pre-intervention measures. Conclusions: This study shows for the first time that it is possible to use illegal drugs, considered harmful to public health, to improve young people’s coping capacity and emotionality by reproducing their positive effects with SRT.

Smart air filters are beneficial to provide highly efficient particle removal, treat multiple contaminants simultaneously and conserve energy during air filtration processes. Herein, a type of self-supporting smart air filter (SSSAF) was fabricated by sandwiching the VOC-responsive PZT/PVDF electrospun membrane with two metal mesh electrodes. Besides the high filtration efficiency for sub-micron particles, the SSSAF showed good responses to pressure drop in the range of 0 to 500 Pa via the electroactivity of PZT/PVDF membrane. In addition, the SSSAF achieved VOC sensing function via the swelling properties of PZT/PVDF membrane in organic vapors, demonstrated by its signal to 50 to 200 ppm ethanol gases. The SSSAF based nanogenerator was employed to harvest wind energy, which was further applied to inhibit bacterial growth without the need of additional power input. The results provide new insight into development of all-in-one smart air filters.

Hydrophilic coatings have recently emerged as a new approach to avoid the adhesion of (bio)organisms on surfaces immersed in water. In these coatings the hydrophilic character is crucial for the anti-fouling (AF) performance. However, this property can be rapidly lost due to the inevitable damages which occur at the surface, reducing the long-term effectiveness of the AF functionality. We report hydrophilic polycarbonate-mPEG polyurethane coatings with tunable hydrophilic properties as well as an excellent and long-term stability in water. The coatings exhibit low protein adhesion values and are able to self-replenish their hydrophilicity after damage, due to the existence of a reservoir of hydrophilic dangling chains incorporated in the bulk. The combination of low T_g and sufficient mobility of the mPEG dangling chains (enabled by chains with higher molecular weight) proved to be crucial to ensure autonomous surface hydrophilicity recovery when the coatings were immersed in water. This coatings and design approach offer new possibilities towards high performance AF coatings with an extended service life-time which can be used in several major applications areas, such as marine and biomedical coatings, with major economic and environmental benefits.

We propose a novel transfer learning method for speech emotion recognition allowing us to obtain promising results when only few training data is available. With as low as 125 examples per emotion class, we were able to reach a higher accuracy than a strong baseline trained on 8 times more data. Our method leverages knowledge contained in pre-trained speech representations extracted from models trained on a more general self-supervised task which doesn’t require human annotations, such as the wav2vec model. We provide detailed insights on the benefits of our approach by varying the training data size, which can help labeling teams to work more efficiently. We compare performance with other popular methods on the IEMOCAP dataset, a well-benchmarked dataset among the Speech Emotion Recognition (SER) research community. Furthermore, we demonstrate that results can be greatly improved by combining acoustic and linguistic knowledge from transfer learning. We align acoustic pre-trained representations with semantic representations from the BERT model through an attention-based recurrent neural network. Performance improves significantly when combining both modalities and scales with the amount of data. When trained on the full IEMOCAP dataset, we reach a new state-of-the-art of 73.9% unweighted accuracy (UA).

Background: Visual acuity (VA) assessments are crucial in ophthalmology but traditionally rely on in-clinic evaluations. The emergence of telemedicine has spurred interest in creating dependable self-administered VA tests for use beyond standard clinical environments. This study evaluates the practicality and validity of a self-administered Near VA card test against traditional Snellen and Rosenbaum Pocket Vision Screener (RPVS) methods for home monitoring and enhancing clinical workflow. Methods: In a cross-sectional study a near VA card (Hadassah Self-Visual Acuity Screener-HSVA) was developed with written and videotaped instructions for self-use. Patients with a minimal best corrected VA (BCVA) of 1.0 LogMAR in at least one eye were recruited from Ophthalmology and Optometry clinics. Outcomes included mean BCVA difference between the self-administered and those obtained by the examiner, and correlations among BCVA values obtained by Snellen, RPVS, HSVA and previous distance BCVA according to the patient electronic medical records. Results: A total of 275 participants (mean age: 42.5±19.4 years, range: 18-89 years, 47% female) were included. Test-retest reliability analysis for the HSVA demonstrated very good correlation and repeatability (n=38 patients.; Rs=1.0, P

Although adults and children differ in self-versus-other perception, the developmental perspective on this discriminative ability is missing. We compared neural activation of self-vs-others in 39 participants of 4 different age groups (4 yo. to adulthood). Two brain regions, the MCC and right postcentral gyrus, exhibited respectively non-linear and gradual gains in discriminative abilities for self-vs-others stimuli. These regions play critical roles in self-referential processing, empathy, and social cognition. Nine brain regions showed linear increase for others-vs-self stimuli. These regions are associated with multisensory processing, somatosensory skills, complex visual stimuli, self-awareness, empathy, theory of mind, and social recognition. Understanding the neural basis of self-vs-others discrimination during development can inform when and how social contexts support learning processes during childhood and adolescence.

The field of power harvesting has experienced significant growth over the past few years due to the ever-increasing desire to produce portable and wireless electronics with extended lifespans. The present work aims to introduce an approach to harvesting electrical energy from a mechanically excited piezoelectric element and investigates a power analytical model generated by a smart structure of type polyvinylidene fluoride(PVDF) that can be stuck onto fabrics and flexible substrates, although we report the effects of various substrates and investigates the sticking of these substrates on the characterization of the piezoelectric material.

Background and Objectives: A novel synthetic self-assembling peptide, PuraStat, has been introduced as a hemostatic agent. This case series aimed to evaluate the clinical efficacy of PuraStat for gastrointestinal bleeding during emergency endoscopy. Cases: Twenty-five patients with gastrointestinal bleeding who had undergone emergency endoscopy with PuraStat between August 2021 and December 2022 were retrospectively examined. Six patients were receiving antithrombotic agent, and ten patients with refractory gastrointestinal bleeding had undergone at least one endoscopic hemostatic procedure. The breakdown of bleeding was gastroduodenal ulcer/erosion in 12 cases, bleeding after gastroduodenal or colorectal endoscopic resection in 4 cases, rectal ulcer in 2 cases, postoperative anastomotic ulcer in 2 cases, and gastric cancer, diffuse antral vascular ectasia, small intestinal ulcer, colonic diverticular bleeding, and radiation proctitis in each case. The method of hemostasis was only PuraStat application in six cases, and hemostasis in combination with high-frequency hemostatic forceps, hemostatic clip, argon plasma coagulation, and hemostatic agents (i.e. thrombin) in the remaining cases. Rebleeding was observed in three cases. Hemostatic efficiency was observed in 23 cases (92%). Conclusions: PuraStat has the expected hemostatic effect on gastrointestinal bleeding during emergency endoscopy. The use of PuraStat should be considered in emergency endoscopic hemostasis of gastrointestinal bleeding.

Ion-complementary self-assembling peptides have been studied in many fields for their distinct advantages mainly due to their self-assembly properties. However, their shortcomings, such as insufficient specific activity and poor mechanical properties, also limited their application. For better and wider application of this kind of promising biomaterials, ion-complementary self-assembling peptides can be modified with their self-assembly properties not being destroyed to the greatest extent. The modification strategies were reviewed by taking RADA16-Ⅰ as an example. For the insufficient specific activity, RADA16-Ⅰ can be structurally modified with active motifs derived from the active domain of the extracellular matrix or other related active factors. For weak mechanical properties, materials with strong mechanical properties or materials that can undergo chemical crosslinking were used to mix with RADA16-Ⅰto enhance the mechanical properties of RADA16-Ⅰ. To improve the performance of RADA16-Ⅰ as drug carriers, appropriate adjustment of the RADA16-Ⅰ sequence and/ or modification of the RADA16-Ⅰ-related delivery system with polymer materials or specific molecules can be considered to achieve sustained and controlled release of specific drugs or active factors. The modification strategies reviewed in this paper may provide some references for the further basic research and clinical application of ion-complementary self-assembling peptides and their derivatives.

This study investigated the effects of freeze-thaw cycles on the mechanical properties of hardened self-compacting concrete for varying column heights. A column (100×20×300 cm) was fabricated by C30 self-compacting concrete in the laboratory and 10 cube samples (10x10x10 cm) were taken from fresh concrete as the references. After a period of 28 days, 160 core specimens (Ø67 mm in diameter) were taken from different column heights. Unit weight, water absorption, compressive strength, and freeze-thaw tests were performed on these 170 (10 reference cubic and 160 core) samples. The mechanical properties of the core specimens before freeze-thaw and after 8-56 freeze-thaw cycles were reported for varying column heights. The average compressive strength value of the reference cubic samples was determined as 40.28 MPa, while the compressive strengths of the core specimens before freeze-thaw were ranged from 40.25 MPa to 49.62 MPa, impying an increase in compressive strength values up to 23.18% compared to the reference cubic samples. Compressive strengths of the specimens subjected to 8 and 56 freeze-thaw cycles varied between 38.71‒48.07 MPa and 31.72‒39.11 MPa, respectively. Statistical analysis revealed that the compressive strength of the concrete exposed to 56 freeze-thaw cycles was significantly different from that of the other specimens.

This study investigated the effects of freeze-thaw cycles on the mechanical properties of hardened self-compacting concrete for varying column heights. A column (100×20×300 cm) was fabricated by C30 self-compacting concrete in the laboratory and 10 cube samples (10x10x10 cm) were taken from fresh concrete as the references. After a period of 28 days, 160 core specimens (Ø67 mm in diameter) were taken from different column heights. Unit weight, water absorption, compressive strength, and freeze-thaw tests were performed on these 170 (10 reference cubic and 160 core) samples. The mechanical properties of the core specimens before freeze-thaw and after 8-56 freeze-thaw cycles were reported for varying column heights. The average compressive strength value of the reference cubic samples was determined as 40.28 MPa, while the compressive strengths of the core specimens before freeze-thaw were ranged from 40.25 MPa to 49.62 MPa, impying an increase in compressive strength values up to 23.18% compared to the reference cubic samples. Compressive strengths of the specimens subjected to 8 and 56 freeze-thaw cycles varied between 38.71‒48.07 MPa and 31.72‒39.11 MPa, respectively. Statistical analysis revealed that the compressive strength of the concrete exposed to 56 freeze-thaw cycles was significantly different from that of the other specimens.

The research community has shown significant interest in the aqueous synthesis of nanomaterials due to its ability to eliminate the need for complex organic solvents. This synthesis approach aligns with the principles of green chemistry, attracting considerable attention. Aqueous solution technology in fabricating nanostructures has gained recognition for its potential to create ultrasensitive, low-energy, and ultrafast optoelectronic devices. This report focuses on synthesizing lead iodide (PbI2) nanoplates using a water-based solution technique and fabricating a planar photodetector. The photodetectors with a planar type of device structure (ITO/PbI2 NPs/Au) demonstrated a remarkable photosensitivity of 3.9×103 and a photoresponsivity of 0.51 mA/W at a wavelength of 405 nm. Notably, the asymmetrical output properties of ITO/PbI2 NPs/Au detector deliver additional evidence of the effective creation of a Schottky contact. Thus, the photodetector exhibited a photoresponse even at 0 V bias, leading to the realization of self-powered photodetectors. Additionally, the device exhibited a rapid photoresponse of 0.21/0.38 s (−5 V) in the visible range. This study has expanded the horizons for the aqueous-phase synthesis of nanoplate nanostructures, enabling the large-area fabrication of high-performance photodetectors.

We reveal the significance of plasmonic nanoparticle’s (NP) shape and its surface morphology en route to an efficient self-assembled plasmonic nanoparticle cluster. A simplified model is simulated in the form of free-space dimer and trimer nanostructures (NPs in shape of sphere, cube, and disk). A ~ 200 % to ~ 125% raise in near field strength (gap mode enhancement) is observed for spherical NPs in comparison with cubical NPs (from 2 nm to 8 nm gap sizes). Full-width three-quarter maximum reveals better broad-spectral optical performance in a range of ~ 100 nm (dimer) and ~ 170 nm (trimer) from spherical NPs as compared to a cube (~ 60 nm for dimer and trimer). These excellent properties for sphere-based nanostructures are merited from its dipole mode characteristics.

Diabetes is one of the fastest spreading diseases of civilisation in the 21st century. The aim of the study was twofold: 1) to find differences in personality traits, self-esteem, body- esteem, and imagery between healthy women and women with diabetes 2) to check whether there are differences in analyzed factors in women with diabetes who participate in sports compared to women who do not. We used 3 questionnaires: Imagination: in sport - short form, Self-Esteem Scale (SES), and BFIS Personality, which were tested online. We found that women with diabetes were characterised by significantly higher neuroticism and lower extraversion and higher conscientiousness (marginally significant). We also found that women with diabetes who practice sport rated their bodies more highly in terms of sexual attractiveness and made better use of imagined affirmations than healthy women who were not active. Our study provides new insights into diabetics in terms of coping with the disease.

Zero-dimensional (0D) tin halide perovskites feature extraordinary properties, such as broadband emission, high photoluminescence quantum yield, and self-absorption-free characteristics. The innovation of synthesis approaches for high-quality 0D tin halide perovskites has facilitated the flourishing development of perovskite-based optoelectronic devices in recent years. However, discovering an effective strategy to further enhance their emission efficiency remains a considerable challenge. Herein, we report a unique strategy employing rapid heat treatment to attain efficient self-trapped exciton (STE) emission in Cs4SnBr6 zero-dimensional perovskite. Compared to the pristine Cs4SnBr6, rapid thermal treatment (RTT) at 200°C for a duration of 120 seconds results in an augmented STE emission with photoluminescence (PL) quantum yield rising from an initial 50.1% to a substantial 64.7%. Temperature-dependent PL spectra analysis, Raman spectra, and PL decay traces reveal that the PL improvement is attributed to the appropriate electron-phonon coupling as well as the increased binding energies of STEs induced by the RTT. Our findings open up a new avenue for efficient luminescent 0D tin-halide perovskites toward the development of efficient optoelectronic devices based on 0D perovskites.

Tinnitus is a phantom sound perception in the ears or head and can arise from many different medical disorders. Currently, there is no standard treatment for tinnitus that reliably reduces tinnitus. Individual patients reported that acupressure at various points around the ear can help to reduce tinnitus, which was investigated here. With this longitudinal observational study, we report a systematic evaluation of auricular acupressure on 39 tinnitus sufferers, combined with a self-help smartphone app. The participants were asked to report about tinnitus, stress, mood, neck and jaw muscle tensions twice a day using an ecological momentary assessment study design for six weeks. On average, 123.6 questionnaires per person were provided and used for statistical analysis. The treatment responses of the participants were heterogeneous. On average, we ob-served significant negative trends for tinnitus loudness (Cohen’s d effect size: -.861), tinnitus dis-tress (d = -.478), stress (d = -.675), and tensions in the neck muscles (d = -.356). Comparison with a matched control group revealed significant improvements for tinnitus loudness (p = .027) and self-reported stress level (p = .003). The positive results of the observational study motivate fur-ther research including a randomized clinical trial and long-term assessment of the clinical im-provement.

Transformer models have emerged as frontrunners in the field of natural language processing, primarily due to their adept use of self-attention mechanisms to grasp the semantic linkages between words in sequences. Despite their strengths, these models often face challenges in single-task learning scenarios, particularly when it comes to delivering top-notch performance and crafting strong latent feature representations. This challenge is more pronounced in the context of smaller datasets and is particularly acute for under-resourced languages such as Arabic. In light of these challenges, this study introduces a novel methodology for text classification of Arabic texts. This method harnesses the newly developed Reverse Positional Encoding (RPE) technique. It adopts inductive-transfer learning (ITL) framework combined with a switching self-attention shared encoder, thereby increasing the model's adaptability and improving its sentence representation accuracy. The integration of Mixture of Experts (MoE) and Reverse Positional Encoding (RPE) techniques empowers the model to process longer sequences more effectively. This enhancement is notably beneficial for Arabic text classification, adeptly supporting both the intricate five-point and the simpler ternary classification tasks. The empirical evidence points to its outstanding performance, achieving accuracy rates of 87.20% for the HARD dataset, 72.17% for the BRAD dataset, and 86.89% for the LABR dataset, as evidenced by the assessments conducted on these datasets.

Many relevant health social actors have voiced concerns about the danger of self-medication in times of growing use of over-the-counter medicines and, in some contexts, unregulated selling of them. Previous research has examined the incidence of parental self-medication as well as the use and abuse of antibiotics without professional advice. However, these studies have limited evidence on the role of family doctors and the perceived severity of self-medication in the case of parents. Based on Health Belief Model, our research tested the effects of exposure to medical information on the perceived level of self-treating the children without medical advice. Specifically, we aimed to assess whether exposure to information warning about the risks of treating children without a medical prescription influences parents' attitudes toward administering medicines to their children without medical advice. The results showed that our respondents evaluated the practices of self-medication negatively, especially when it came to treating their children without medical advice. However, their attitudes towards self-medication varied depending on their beliefs about administering certain medications. Additionally, the results showed that the perceived level of satisfaction with the family physician could be a significant factor in controlling and avoiding the treatment of children without professional advice.

Abstract: Objective: This study aimed to estimate adherence to methotrexate in patients with rheumatoid arthritis and identify specific nonadherence risk factors. Methods: A cross-sectional study included 111 patients (age mean 56.2±10.6 years, 78.4% female, and disease duration mean 6 (3-13) years). Three adherence self-assessment questionnaires were used: the Compli-ance-Questionnaire-Rheumatology (CQR19), the Medication Adherence Reports Scale (MARS-5), and the Visual Analogue Scale (VAS). We also collected demographic data, disease and treatment characteristics, and anxiety/depression estimation results (Hospital Anxiety and Depression Scale- HADS). Results: Adherence was identified in 48.6% of patients (COR19), 70.3% (MARS-5), and 82.9% of patients in the VAS questionnaire. All three questionnaires displayed a significant positive mutual correlation: CQR19 with MARS-5 and VAS (r =0.364, r=0.329 respectively, p<0.001 for both), between VAS and MARS-5 score (r=0.496, p<0.001). A significant positive prediction was shown for urban residence (0.347 (0.134-0.901), p=0.030), using the MARS-5 scale, female sex (0.264 (0.095-0.730), p=0.010) according to CQR19 and for a dose of methotrexate (0.881 (0.783-0.992), p=0.036) in VAS scale, while negative prediction were shown for comorbidity number (3.062 (1.057-8.874), p=0.039), and depression (1.142 (1.010-1.293), p=0.035) using MARS-5 scale and for older age (1.041 (1.003-1.081), p=0.034) according to CQR19. The use of steroids was a significant positive predictor in all three questionnaires and remained an independent predictor for metho-trexate adherence in multivariant logistic regression. Conclusion: We showed nonadherence to methotrexate in a significant number of patients using all three questionnaires. Concomitant steroid therapy emerged as an independent positive predictor for adherence.

To better understand the shape memory materials and self-healing materials, a new series of liquid-crystalline shape memory polyurethane (LC-SMPU) composites, named SMPU-OOBAm, were successfully prepared by incorporating 4-octyldecyloxybenzoic acid (OOBA) into the PEG-based SMPU. The effect of OOBA on the structure, morphology and properties has been carefully investigated. The results demonstrate that SMPU-OOBAm have liquid crystalline properties, triple-shape memory properties and self-healing properties. The incorporated OOBA promotes the crystallizability of both soft and hard segments of SMPU, and the crystallization rate of the hard segment of SMPU decreases when the OOBA-content increases. Additionally, the SMPU-OOBAm forms a two-phase separated structure (SMPU phase and OOBA phase), and it shows two-step modulus changes upon heating. Therefore, the SMPU-OOBAm shows triple-shape memory behavior, and the shape recovery ratio decreases with an increase in the OOBA content. Finally, SMPU-OOBAm shows self-healing properties. The new mechanism can be ascribed to the heating-induced “bleeding” of OOBA in the liquid crystalline state and the subsequent re-crystallization upon cooling. This successful combination of liquid crystalline properties, triple-shape memory properties and self-healing properties make the SMPU-OOBAm composites with many promise applications in smart optical devices, smart electronic devices and smart sensors.

Radish (Raphanus sativus L.), a root vegetable belonging to the Brassicaceae family, is considered as one of the representative crops displaying sporophytic self-incompatibility (SSI). The utilization of a self-incompatibility system in F1 breeding can improve the efficiency of cross combinations, leading to a reduction in breeding time and aiding in the development of novel F1 varieties. The successful implementation of this system necessitates the rapid and accurate identification of S haplotypes in parental lines. In this study, we identified a total of 9 S haplotypes among 22 elite radish lines through Sanger sequencing. Subsequently, we obtained sequences for showing 95% similarity to 9 S haplotypes, along with sequences identified by other researchers using BLAST. Following this, multiple sequence alignment (MSA) was conducted to identify SRK and SLG sequence similarities, as well as polymorphisms within the class I, II groups. Subsequently, S haplotype-specific marker sets were developed, targeting polymorphic regions of SRK and SLG alleles. These markers successfully amplified each of 9 S haplotypes. these markers will play a crucial role in the rapid and precise identification of parental S haplotypes in the radish F1 breeding process, proving instrumental in the radish F1 purity test.

Graphene nanostructures (GNS) are among the most promising materials for creating supercapacitors. However, GNS are still not used in creating supercapacitors due to the impossibility of obtaining large volumes of high-quality material at an acceptable cost. In this work, we investigated the efficiency of using few-layer graphene (FLG) with the number of layers is not more than 5 synthesized under Self-propagating high-temperature synthesis (SHS) conditions as basic material for supercapacitors. Using the SHS process makes it possible to synthesize large volumes of FLG without Stone-Wales defects. It was found that the synthesized FLG makes it possible to obtain better results than using classical materials, namely activated carbon (AC). It was found that the sample based on FLG has a higher specific capacitance – 65 F×g-1 compared to the sample from AC, the specific capacitance of which is 35 F×g-1, for a speed of 5 mV×s-1 these values are 170 and 64 F×g-1, respectively. The drop in capacitance over 1000 cycles was 4%, which indicates a sufficiently high stability of FLG and allows us to consider FLG as perspective material for use in supercapacitors.

Aims: This study aims to evaluate the impact of family-centered empowerment on Jordanian adolescents with type 1 diabetes (T1DM), focusing on their HbA1c levels, self-efficacy, and quality of life (QOL). Background: Poor glycemic management in adolescents with type 1 diabetes increases complications. Improved control is linked to various variables, but few studies focus on Middle Eastern populations. Methods: An experimental study involved 68 adolescents with T1DM visiting Jordanian Royal Medical Services' clinics. Two sets of participants were created: control (n = 34) and intervention (n = 34). Data was collected through face-to-face interviews and medical records. Results: The study found significant differences in self-efficacy scores between the intervention and control groups, with the intervention group experiencing a significant decrease in HbA1c readings and a significant difference in QOL between pre-program and post-program phases. Discussion: Family empowerment can significantly improve the lives of Jordanian teenagers with type 1 diabetes. This strategy leads to improved glycemic management, increased self-efficacy, and improved quality of life. Future treatments and health policies should recognize and value the critical role families play in the care of this population. Conclusion: The study suggests that patients with T1DM should receive continuous care education sessions, including self-care training, to improve their health. Nurses should also incorporate these training into treatment plans and educational programs for adolescents to enhance their QOL.

Introduction The placement of implants is often hindered by a severely atrophic mandibular edentulous ridge. A sufficient volume of bone graft is crucial for successful implant restoration. The required bone graft volume directly correlates with the deficiency present in the edentulous ridge. If the residual crestal bone height is so low that the distance between the crestal ridge and the inferior alveolar nerve is less than 2 mm, a significant bone augmentation procedure is necessary. This procedure must ensure the implants are surrounded by a sufficient margin of bone, aiming for a final height of more than 8 mm and a width of more than 7 mm. Achieving primary closure with adequate soft tissue is vital for the success of the bone graft procedure. The key to successful bone grafting lies in the effective management of the soft tissue covering. Case Report This case report details the treatment of a patient with severely atrophic edentulous ridges on both sides, addressed using Self Inflating Tissue Expanders (SITEs) to facilitate bone grafting and implant placement. Following soft tissue expansion, bone grafting and implant placement were successfully performed. The implants supported a fixed restoration, which remained stable and complication-free over a seven-year observation period. Conclusion The SITE (Self-Inflating Tissue Expander) proved effective in obtaining a substantial amount of bone graft needed for implant installation. A seven-year follow-up confirmed the implants were well-functioning with stable bone support, healthy soft tissue coverage, and adequate vestibular depth.

A new circuit model of the self-powered device for heart rate measurement is presented in this paper. This device consists of piezoelectric energy harvester (PEH), power management circuit (PMC) with energy storage, microcontroller, Photoplethysmography (PPG) sensor, and Wi-Fi module. The PEH is placed under the insole to harvest the pressure energy from human foot-step to generate ac power. In our model, a PEH is represented by sine voltage source, where its parameters were taken from experiments with 20 volunteers. The PMC is simplified by a switch with gain δ placed in series with the main circuit. The model of the main circuit is RC elements in parallel, where C is the capacitance of the storage device, and R is the equivalent parallel resistance of the microcontroller, PPG sensor, and Wi-Fi modules, respectively. The value of R depends on the power and current absorbed by those modules during sleep, deep sleep, sense, and transmit modes which collected from the datasheet. Finally, the proposed circuit model of the self-powered device was built and simulated in SPICE. The simulation results were compared with the laboratory experiment using commercial devices. Based on the results, the proposed model had small gaps compared to the real self-powered devices in terms of average current, voltage, power and efficiency.

(1)Background: This report was an effective evaluation of using multimedia educational program for self-care and quality of life in patients with a stoma at postoperative and established a simple threshold for enterostomy self-care skills.(2)Methods:108 patients with enterostomy were randomly assigned to receive either the intervention multimedia education program (including information about preparation for enterostomy care, cleaning method, manual bag replacement steps and precautions). The primary outcome was self-care ability and quality of life (defined as overall enterostomy self-care ability and overall quality of life), which was assessed at 2 weeks after intervention via an interview.(3)Results: Compared with those who in the conventional stoma education program, patients received the multimedia education program significantly improved their overall self-care ability and quality of life in statistically. The threshold of the enterostomy self-care skill scale was 20 points, and its corresponding sensitivity was 77.8%, and the specificity was 75.7%.(4)Conclusions: According to our study, the multimedia education program could enhance self-care ability of home care and quality of life in patients with enterostomy.

In the current manuscript we assess to what extent X-ray photoelectron spectroscopy is a suitable tool for probing the dipoles formed at interfaces between self-assembled monolayers and metal substrates. To that aim, we perform dispersion-corrected, slab-type band-structure calculations on a number of biphenyl-based systems bonded to a Au(111) surface via different docking groups. In addition to changing the docking chemistry (and the associated interface dipoles), also the impacts of polar tail-group substituents and varying dipole densities are investigated. We find that for densely-packed monolayers the shifts of the peak positions of the simulated XP-spectra are a direct measure for the interface dipoles. In the absence of polar tail-group substituents they also directly correlate with adsorption-induced work-function changes. At reduced dipole-densities this correlation deteriorates, as work function measurements probe the difference between the Fermi-level of the substrate and the electrostatic energy far above the interface, while core level shifts are determined by the local electrostatic energy in the region of the atom from which the photoelectron is excited.