The latest life-origin literature is reviewed, along with grouping and classification of the most enduring models of abiogenesis. New trends are identified in origin-of-life thought. Astrobiology continues to deal mostly with inorganic and very elementary organic reactions in extreme environments. Nonequilibrium thermodynamics has received a great deal of attention. Attempts have been made to relate Bejan’s Constructal Law to life and abiogenesis. RNA World preclusions only seem to have grown, while ribozyme/peptide models have expanded. The biosemiotic movement and code biology is gaining influence in refining a more complete description of life. Prof James Tour at Rice University in a fourteen-lecture series lists a number of synthetic biochemical hurtles remaining that still need to be overcome. But the need for some sort of informational recipe, instruction, steering and control now seems to be the most prominent area of focus and concern. Even a protometabolism needed active selection and controls rather than mere constraints or law. The latest literature still does not elucidate how protometabolism was orchestrated in an inanimate, pre-evolutionary environment.

Within the past few decades, thousands of experiments have been performed to characterize waste and biomass to estimate the bioenergy potential and product identification. There is a need to develop an integrated process model based on experimental literature, and simulation to obtain suitable products. In this study municipal solid waste (MSW) characterization and integrated process model have been developed to optimize final products in a reactor system. The process model has two modes R&D and reactor control (RC) to obtain suitable products including bio-oil, char, and gases. A database was integrated based on thermokinetics, machine learning and simulation models to optimize product efficiency. The experimental data includes thermogravimetric analysis, Fourier transform Infrared Spectroscopy, Gas chromatography, and Mass spectrometry, which are linked with pyrolysis experimental setup. Feedstock-product mapping models were incorporated into the database along with the temperature, heating rates, elemental analysis, and final product concentration, which are utilized for pyrolysis reactor setup. Product feasibility is conducted based on lifecycle cost, affordability, and product efficiency. The present work will bridge the gap between experimental study and decision making based on obtained products at several experimental conditions around the world.

Although agricultural crops production systems in subtropical plateau regions currently pose high environmental risks, especially in developing countries, their environmental impacts and emission-reduction potentials remain unclear, and the development potential of such systems is likely huge. We conducted a case study in Yunnan Province, China, to quantify the environmental impacts from crop production during 2002–2021. The life cycle assessment method was employed to identify factors driving the environmental impacts, and potential mitigation strategies were proposed. The yield and total nutrient input of grain crops in Yunnan Province increased over the 20-year period, and environmental footprint of crops production in Yunnan Province was higher than that of other regions. Average annual mean greenhouse gas (GHG) emissions and soil acidification potentials (AP) and water eutrophication potentials (EP) of crops production during 2002–2021 were 732 kg CO2-eq·Mg-1, 15.8 kg SO2-eq·Mg-1, and 2.7 kg PO4-eq Mg-1, respectively. GHG emissions from g crops mainly originated from applying agricultural materials during the crop life cycle. There was a significant correlation between surplus nitrogen and environmental impacts. Scenario testing showed that through crop sowing, nutrient regulation, and crop management, the crop yield could be increased and environmental costs could be reduced. The greatest reductions were found in wheat production: 53.1%, 67.9%, and 67.7% for GHG emissions, AP, and EP, respectively. Adopting comprehensive agricultural management measures could reduce the negative impact of crops production on the environment in subtropical plateau areas and achieve sustainable agricultural development.

The recycling of wastes to obtain value-added products is a great challenge in the sustainable economy. In our studies, a mixed precursor containing aluminium scrap from end – of – life vehicles and TiO2 Degussa P25 was used to prepare TiO2 modified Al photocatalyst through solid state reaction. Al scrap and TiO2 Degussa P25 in the ration of n(Ti) / n(Al) = x (x = 0.0 - 2.5%), and acetylacetonate and Tween 80 was mixed under magnetic stirring and sintered using a con-ventional furnance at 550°C. DTA – TG – DTG, X – ray diffraction, Fourier – transform infrared, UV – Vis and photoluminescence spectroscopies were assed to investigate the thermal, structural, optical properties and photocatalytic activity. The effect of aluminium concentration on the characteristics of TiO2 Degussa P25 depending on the above instruments are studied. XRD revealed that the materials have crystal structure of anatase TiO2, rutile TiO2 and aluminium. The opto-electronic properties show that Al addition shifted the absorption spectra toward the visible range. The photocatalytic performance of Al – TiO2 composites was quantified by the degradation of Allura Red solution under a visible condition. The highest photocatalytic activity (79.99%) was achieved for the sample containing 0.5% Al and a higher concentration of Al particles shields the active centres of the semiconductor, thus reducing its photocatalytic activity. Aluminium scrap from end-of-life vehicles can be a source of raw material to be considered in semiconductor production. The spin-trapping technique evidenced that •O2- was the main species generated responsible for the Allura Red degradation.

The aim of this investigation is to offer a data-based scheme for predicting electrode wear in resistance spot welding. Electrode wear and alloying is one of the most significant factors that affect the mechanical properties of spot welds and the variation in weld quality. In this study, Rogowski coils and twisted pairs attached to the top and bottom electrodes were used to obtain the welding current and the inter-electrode voltage in the welding process, thereby calculating the dynamic resistance value during the welding process. The electrode diameter was obtained from the pressure exerted by the upper and lower electrodes on the carbon paper when the current was cut off and was regarded as an indicator of electrode wear. By continuously welding 0.5mm thick BH 340 steel plates until the electrode failed, the dynamic resistance signal was recorded in real time. Simultaneously, the electrode diameter after every 4 welds was also recorded. On this basis, the correlation between electrode diameter and dynamic resistance is studied. In order to quantitatively study the mapping relationship between dynamic resistance and electrode wear, 11 characteristic values were extracted from the dynamic resistance, and the stepwise regression method was used to obtain the regression formula between the characteristic values and the electrode diameter. Using new data to verify the effectiveness of the regression model, the acquired results display that the maximum error between the predicted value of the electrode diameter and the measured value obtained by the regression equation with the interactive quadratic term is 0.3 mm, and the corresponding relative error is 7.69 %. This result demonstrates that the method proposed in this paper can effectively monitor the electrode wear and failure process.

Green-space resources, in the context of urbanisation, cannot meet the actual needs of residents well, and the study of the balance of green-space resource allocation from the relationship between supply and demand is an urgent problem to be solved. This study quantitatively evaluates the green-space supply level from four dimensions by constructing a framework for assessment in the community life circle. It also evaluates the matching of green space supply and demand, resource distribution fairness, and distribution equilibrium under group differentiation through the supply–demand coupling matrix, Gini coefficient, and the Kruskal–Wallis H non-parametric rank-sum test, respectively. This study shows that (1) a significant spatial imbalance exists in green-space resource allocation in community life circles in different dimensions. (2) The comprehensive green-space supply level in the community life circle matched the total demand of residents to a low degree. (3) There was significant inequality in green-space resource allocation within the community life circle (the Gini coefficient of each evaluation perspective was > 0.4). Based on the study results, we were able to identify community life circles with spatial mismatches, different supply and demand, and other green-space resource allocation problems, which is of great significance to urban green-space research and planning practice under the "green justice" framework.

The principal goal of this current study was to isolate a new potential probiotic strain to prepare contamination-free probiotic dahi in a dosage form with desired shelf life. To achieve our target, firstly, probiotic dahi was prepared by a probiotic strain, Lactobacillus acidophilus JB2CON (OM909067) (identified by 16S sequencing) isolated from natural dahi in Dhaka, Bangladesh. The isolate showed five probiotic features by in vitro test and had an antagonistic effect against five different pathogens. More interestingly, it inhibited Escherichia coli (diameter of zone of inhibition = 15.75±0.35) the most. In the time-kill analysis method, E. coli was killed totally within 5.50 hours of fermentation. Finally, the time duration of 14 days was an ideal shelf life, because the probiotic count increased but a slight change in pH did not affect the taste (sourness/acidity) of dahi. The most significant impact of this research is that the probiotic dahi of our experiment might be used as a cheap option for preventing pathogenic Escherichia coli-related foodborne diseases worldwide, especially in underdeveloped countries like Bangladesh.

By virtue of the knowledge of the beneficial effect of the warm and dry storage, for the growth of the chincuya seed embryo, defined as morphological dormancy. The effect of the same type of storage was studied for the seed viability and germination by soaking gibberellic acid. Also, fatty acids and their kinetics were identified during the warm and dry storage. The following treatments were evaluated: storage time (0, 3, 6, 9 and 12 months), seed soaking in gibberellic acid at 350 mg L-1, and for the control, imbibition in distilled water, both for 72 h. The seed viability was evaluated through the stain test with tetrazolium chloride. The embedded seeds were germinated on absorbent paper towels and incubated at different temperatures of 30 ° C during the day and 25 ° C at night and 12 hours of photoperiod. The lipid profile was developed by gas chromatography. Seeds were held at constant temperature of 25 ± 3 ° C, in darkness, during the storage time. Results demon-strated that the high initial viability was maintained until the ninth month, when it decreases and is statisti-cally different from the other treatments. The smaller germination percentage (26.1 %) was observed in the freshly harvested seeds and, the higher one corresponded to the six months (65.6 %), with these differences being statistically significant. Regarding the identified fatty acids and their average content, it was found that 33.41 % corresponded to palmitic acid, 7.72 % to stearic acid; the arachidic acid with 1.30 %, making a total of saturated fatty acids of 42.44 %. The detected unsaturated fatty acids were: palmitoleic acid 1.52 %, oleic acid 43.37 % and linoleic acid 7.24 %, in total, 52.15 %. No significative changes were observed in the fatty acids content that are the largest part of the total seed reserves; although the higher concentrations matched with the longest germination (three months), with an average of 92.84 % total fatty acids. Specified regressions indi-cated with statistical robustness that palmitoleic and palmitic acids increased while the oleic acid decreased during the dry storage. The arachidic acid showed a slightly downward trend. Also, the concentrations of fat-ty acids were significatively different between unstored and unincubated seeds (intact) and unstored and in-cubated, but without germinating seeds (dormant), in the latter, the total fatty acids content was significantly lower. Given that the application of gibberellic acid and warm dry storage favored germination, as well as the change in fatty acid content during warm dry storage, added to the results already reported on morphological changes and embryonic growth as an effect of the same type of storage, it is established that Annona purpurea seeds present morphophysiological dormancy, also this is the first identification report of arachidic and pal-mitoleic acids in chincuya seeds and the higher germination percentage reported (65.6 %).

The Sarcoma Assessment Measure (SAM) was developed as a sarcoma-specific patient-reported outcome measure to be used in clinical practice. We have reported in detail how SAM has been developed in collaboration with patients and healthcare professionals. The aim of this paper is to report the preliminary validation of SAM. The 22-item SAM was administered alongside a validated quality of life questionnaire and measure of activities of daily living. Linear modelling was used to build a measure, which had predictive validity in comparison to more established outcome measures. Of the 762 patients who participated in the study, 44.1% identified as male, and participant age ranged from 13-82 years. Clinically, participants presented with a range of soft tissue (82.2%) and bone (21.8%) sarcomas. Our preliminary analysis indicates that SAM accounts for 35% of the Global quality of life scale and 18% of the TESS so psychometrically it overlaps with quality of life and activities of daily living, but also measures distinct concerns. This demonstrates that this measure picks up issues that are important to patients with sarcoma that are not reflected in other measures. We have established the preliminary validity of SAM and believe it has utility as a patient-reported outcome measure both as a research tool and for assessing the impact of symptoms and dysfunction related to sarcoma as part of clinical care. Further validation using a larger and more clinically diverse sample is now needed.

Estimating the Remaining Useful Life (RUL) of aircraft engines holds a pivotal role in enhancing safety, optimizing operations, and promoting sustainability, thus being a crucial component of modern aviation management. Precise RUL predictions offer valuable insights into an engine’s condition, enabling informed decisions regarding maintenance and crew scheduling. In this context, we propose a novel RUL prediction approach in this paper, harnessing the power of Bi-directional LSTM and Transformer architectures, known for their success in sequence modeling, such as natural languages. We adopt the encoder part of the full Transformer as the backbone of our framework, integrating it with a self-supervised denoising autoencoder that utilizes Bidirectional LSTM for improved feature extraction. Within our framework, a sequence of multivariate time series sensor measurements serves as the input, initially processed by the Bidirectional LSTM autoencoder to extract essential features. Subsequently, these feature values are fed into our Transformer encoder backbone for RUL prediction. Notably, our approach simultaneously trains the autoencoder and Transformer encoder, different from the naive sequential training method. Through a series of numerical experiments carried out on the C-MAPSS datasets, we demonstrate that the efficacy of our proposed models either surpasses or stands on par with that of other existing methods.

The first 1000 days of life is a critical period that contributes significantly to the programming of an individual's future health. Among the many changes that occur during this period, there is growing evidence that the establishment of a healthy gut microbiota early in life plays an important role in the prevention of both short- and long-term health problems. Numerous publications suggest that the quality of gut microbiota colonization depends on several dietary factors, including breastfeeding. In this respect, a relationship between breastfeeding and the risk of inflammatory bowel disease (IBD) has been suggested. IBD are chronic intestinal diseases in which perinatal factors may be partly responsible for its onset. We propose to review the existence of links between breastfeeding and IBD, based on experimental and clinical studies. Overall, despite encouraging experimental data in rodents, the association between breastfeeding and the development of IBD remains controversial in humans, partly due to considerable heterogeneity between clinical studies. The duration of exclusive breastfeeding is probably decisive for its lasting effect on IBD. Thus, specific improvements in our knowledge could support dietary interventions targeting the gut microbiome, such as the early use of prebiotics, probiotics or postbiotics in order to prevent the disease.

This study examined the effect of the media usage environment, particularly TV and SNS devices, on advertisement acceptance, lifestyle, and psychological satisfaction. Hypothesis pathways and comparative structural mediating effects were analyzed. Media and Consumer Research public data were used for empirical analysis. A total of 6,640 people who participated in sports activities were included in the study. The results demonstrated that TV and SNS device usage environments had similar effects on advertisement acceptance. While TV did not influence the pursuit of personal life, SNS device use environments affected the pursuit of personal life. SNS device use environments had a greater effect on individual psychological satisfaction than TV. Adoption had a mediating effect on the influence of media usage environments on the pursuit of personal life. The pursuit of a personal life had a significant mediating effect on the influence of media use environments on psychological stability. This study revealed no differences in the effects of new and traditional media on advertisement acceptance, while new media had a greater influence on lifestyle and psychological satisfaction.

Gas turbine installations (GTIs) are widely used to generate electrical and thermal energy mainly by burning gaseous fuels. The use of GTIs to burn hydrogen as part of the development of hydrogen energy technology is currently of particular interest. In order to assess the prospects of using GTIs in such a way, it is necessary, among other things, to understand the carbon footprint of the gas turbine as part of the carbon footprint of the entire life cycle of hydrogen. The article provides an overview of the results of previously published studies on life cycle assessment (LCA) of technically complex devices associated with the production and consumption of fuel and energy, which, from the point of view of the complexity of LCA, are most similar to gas turbine installation. The characteristics of the considered stages and resources used in the assessment of the stages of the life cycle of technically complex equipment are presented, including an analysis of the amount of materials used in production and construction. Taking into account its specific application in Russia, an assessment of greenhouse gas emissions at the stages of the GTI life cycle per MWh of produced capacity was carried out.

A rapid and efficient technique using an electronic nose based on a mass detector combined with headspace sampling (HS-SPME-MS e-nose) and chemometric tools was applied to classify beer samples between fresh and aged and between samples contained in aluminium cans or glass bottles, and to predict the shelf life of beer. The mass spectra obtained from the HS-SPME-MS e-nose contain information on the volatile compounds, recorded as the abundance of each ion at different mass-to-charge (m/z) ratios. The analysis was performed on 53 samples aged naturally for eleven months in the absence of light and with a controlled temperature of around 14° C +/- 0.5° C. Principal Component Analysis (PCA) was performed on the data, showing a grouping of samples between fresh and aged. Partial Least Square Discriminant Analysis (PLS-DA) allowed discriminating fresh from aged beers but was not able to discriminate samples packaged in aluminium cans or in glass bottles. Finally, Partial Least Square Regression (PLSR) was applied to build a prediction model and showed to be effective to predict beer shelf life.

When disposing of waste metal resources in landfills, environmental issues such as soil contamination may arise. Recycling these resources not only recovers valuable metals but also mitigates environmental pollution. Platinum (Pt), a valuable metal used in fuel cells for its high water production activity, will see increased future demand as a fossil fuel alternative. This study analyzes the environmental and resource reduction effects of recycled Pt, considering the growing emphasis on its recycling for stable supply and demand of Pt. The environmental impact and resource consumption of recycled Pt with primary Pt (from natural mines) were compared and analyzed using the Life Cycle Assessment (LCA) technique. Results revealed that resource consumption for primary Pt was 8.25E+01 kg Sb-eq./kg, significantly more than the 5.45E+00 kg Sb-eq./kg for recycled Pt. This represents an environmental reduction effect of approximately 93%. In the case of greenhouse gas emissions, primary Pt emitted 1.35E+04 kg CO2-eq./kg, while recycled Pt emitted 6.94E+02 kg CO2-eq./kg, resulting in an environmental reduction effect of approximately 95%. In conclusion, recycling Pt, compared to primary extraction, offers substantial environmental and resource reduction benefits. This study underscores the significance of recycling and highlights the potential environmental improvements achievable through sustainable practices.

Study design: Creating and psychometric testing of a new QoL Questionnaire about Physiotherapeutic Specific Exercises of Scoliosis (Questionnaire of Physiotherapeutic Specific Exercises of Scoliosis -QPSSE). Purpose: The purpose of this study is to create a reliable and valid questionnaire for patients suffering mild and moderate adolescent idiopathic scoliosis (AIS) who have been treated with Physiotherapeutic Specific Exercises of Scoliosis (PSSE) in order to evaluate their quality of life. Materials and Methods: The developed questionnaire was based on a thorough literature review as well as on authors experience. It consists of 53 questions, of which 37 have a positive meaning, 15 have a negative meaning, and one is multiple choice question, additionally there are six “open” questions. Except for the multiple choice question, all other questions are answered on a Likert scale ranging from 1 to 5 scores. 5 represents a positive meaning or very much, whereas 1 stands for a negative meaning or not at all. Questions were developed by the authors who subsequently categorized the 53 questions into the following 8 domains: physical functioning, self-image, Physiotherapeutic Scoliosis-Specific Exercises (PSSEs), psychosocial functioning, cognitive functioning, compliance, motivation and pain. A pilot study was conducted so that we could calculate Cronbach’s Alpha based on the outcome. Due to the COVID-19 pandemic, the authors worked through the Zoom online platform to structure the questionnaire. Results: Pearson's correlation coefficient was used for all correlations evaluated. P values of less than 0.05 were considered to be significant. Internal consistency was evaluated with Cronbach's alpha. Although there were very few missing values, accounting for 0.78% of the total values of the questionnaire, expectation maximization likelihood algorithm was used to impute data. IBM® SPSS® Statistics Software v.25 was used for the analysis. Cronbach's alpha coefficients for the overall score was 0.84. Conclusion: This original QPSSE was found to be a reliable and valid tool for AIS treated conservatively with PSSE and for their clinicians.

The research investigated the relationship between burnout syndrome and the variables of mental resilience and quality and enjoyment of life, in Greek private and public sector workers (N=112), with demographic differences. Data were collected through a structured questionnaire which was distributed in the form of an electronic Microsoft forms. The questionnaire contained demographic questions, the psychometric tool Burnout Assessment Tool version 2.0 (Schaufeli et al., 2019), the psychometric tool Brief Resilience Scale (BRS) (Smith et al., 2008), and the psychometric tool Quality of Life Enjoyment and Satisfaction Questionnaire (Q-LES-Q) (Endicott et al., 1993) which were used to measure the three variables examined by the research. For statistical analysis, Pearson and Spearman correlation coefficients were used to test the relationship between two quantitative variables, while linear regression analysis was used to find independent factors. The main research hypothesis was verified, finding a negative correlation between burnout and the variables of mental resilience and quality of life, while it was identified that employees experienced greater exhaustion and spiritual withdrawal compared to freelancers. Hypotheses regarding age, educational level, and public-private job data were not verified as there were no statistically significant differences in demographic results.

Abstract: Extensive research shows nurses’ work environment to be particularly stressful. This study develops, explores, and psychometrically tests a new profession specific ques-tionnaire identifying generalized and specific resistance resources, that make it possible to measure resources to manage work-related stress. An exploratory study design was em-ployed. The questionnaire was developed inspired by the MEASURE approach and the salutogenic theory of health. Building on the results from a literature review of nursing re-search and salutogenesis, supplemented by twelve interviews with hospital nurses, an item pool was generated. A first version was pilot tested in a group of nurses who were studying to become specialist nurses. A second version of the questionnaire was psycho-metrically tested on nurses in close patient care (n = 475), analysed using Principal Com-ponent Analysis as the extracting technique to identify the underlying structure of the questionnaire. The Principal Component Analysis revealed a four-component model of 19 items. “Manageability as a resource for handling the workload” was the strongest compo-nent, accounting for 21 % of the explained variance. “Contacts with patients as resources for nurses’ job satisfaction” (17.8 %). “Professional attitudes are labelled as resources to nursing” (15 %). “Colleagues are important resources for remaining in the nursing profes-sion” (11 %). The structure of the questionnaire indicates its usefulness in clinical practice for measuring resistance resources.

Since the energy sector is the main source of greenhouse gases, it has the highest potential for improvement. Improvements can be achieved by generating energy from renewable sources. Combined with thermal energy storage, concentrating solar power plants represent a promising technology for dispatchable renewable energy, ensuring a stable energy supply even in remote areas without contributing to greenhouse gas emissions during operation. However, it is important to note that greenhouse gases and other polluting emissions may occur during the manufacturing process of concentrating solar power plant components. This work analyses the design of the receiver to produce thermal energy for the existing solar dish CSP plant at the Energy Center of the Politecnico di Torino. The objective of this plant is to produce hot water for a small case study. Considering the average solar irradiance for Turin equal to 800 W/m2, the surface heat flux was obtained from the first part of the analysis, which was used to obtain the maximum internal temperature in the receiver equal to 873.7 °C. The maximum temperature obtained was a constraint for the selection of the material for the solar receiver. Of the various possibilities, copper was chosen. In the second part of the work, a Life Cycle Assessment was carried out to compare the emissions generated during the production of the main components of the CSP plant with the emissions generated by the methane-fuelled water heater that produces the same amount of water as the CSP plant. It can be concluded that the manufacture of the main components of the CSP plant results in lower greenhouse gas emissions than the operational phase of a conventional natural gas-fired water heater (1.6 kg CO2/day).

Physical activity is especially important of children's everyday life with chronic disease. The aim of the study was to show whether asthma is a barrier to physical activity in our society. The correlation between the severity of the disease, body mass index, and physical activity were analyzed, and, parents' opinion whether children should participate in active sports was assessed. Physical activity of children with asthma was analyzed by questionnaires and activity-measuring armbands. 93 parents and their children were involved in the survey, while 20 children were wearing the armband. The age of children was 12.6±3.5 years (mean±SD), 69.9% were boys, 30.1% were girls. 93.4% of the respondents participated in physical education program and 56.5% also attended sporting activities on a regular basis. 61.2% of the children had mild, 37.6% moderate, and 1.2% severe asthma. 6.5% of the respondents stated that their illness had been consistently or frequently limiting the performance concerning their school or home duties over the past 4 weeks. Twelve percent of parents felt that physical activity was not appropriate in the context of this disease. We conclude, that fear of the consequences of physical activity depends largely on education which should involve their parents, teachers and coaches.

Many Western studies have indicated that older women are generally more vulnerable in terms of mobility compared to older men, particularly regarding driving. However, the situation may differ in the context of China. This study, based on activity diaries and semi-structured inter-views, focuses on the spatiotemporal behavior of older adults in Tianjin and explores how the constraints posed by activity companions (in terms of type, size, and composition) shape the mo-bilities of older men and women, including activity locations, travel distances, and transporta-tion modes. The key findings are as follows: First, older women are more engaged with their families due to a higher percentage and longer duration of activities spent with family members. Second, older men tend to have more concentrated travel distances near their homes compared to older women. Third, older women exhibit a broader range of activities in different locations and engage in longer-distance leisure travel with family members when compared to older men. In the context of Western literature, this study discusses older women's enhanced social interactions, their earlier retirement in China, and the impact of COVID-19 as factors that help explain these findings. This study contributes to a deeper understanding of accompanied mobilities among Chinese older adults using geographical theory and methods, emphasizing the importance of flexible work schedules for the workforce and the organization of community-based activities to promote the social interactions and mobilities of older adults.

Drowning remains a prominent global pediatric health concern, necessitating preventive measures such as educational initiatives for children and caregivers. This study aimed to assess the feasibility and educational effectiveness of an interactive puppet show centered on water safety for children and parents. A 30-minute original theater performance, featuring two actors and three puppets (a girl, a crab, and a lifeguard), was conducted. Subsequently, 185 children (aged 4 to 8) and their 160 parents (134 mothers and 26 fathers) participated in this quasi-experimental study. Pre- and post-show tests were administered to evaluate knowledge and behaviors in aquatic environments. Prior to the puppet show, 78% of children exhibited basic aquatic competency. Only 33% considered swimming alone risky. Following the intervention, 81.6% of children changed their perception of the risks of solo beach activities, showing improved knowledge of emergency number activation (from 63.2% to 98.9%, p<0.001). The intervention increased parents' intention to visit lifeguard-patrolled beaches and improved their CPR knowledge for drowning victims by 58.8%. In conclusion, a drowning prevention puppet show positively impacts children and parents, potentially enhancing safety behaviors during water-related leisure activities, warranting consideration as part of comprehensive drowning prevention strategies.

Buildings are subject to intrinsic and extrinsic failures at all stages of the construction process, i.e., design to occupancy (i.e., use) as several failure types can affect them. There are three basic steps for researching building failures: listing, cataloging, and solving/deciding whether highlighting the least invasive and lowest cost intervention. Therefore, this research presents some methods used in construction for the intervention prioritization and seeks to illustrate the most suitable methodology for different settings failure x diagnosis x intervention. Therefore, the most traditional tools are shown: BASICO, SWIFT, FEMEA, AAF, and GUT matrix, where a critical assessment of the strengths and weaknesses is carried out. After that, a case study on maintenance services for the moisture on the building facades was performed. Finally, the GUT matrix and the FMEA method are the best results

Life Cycle Assessment (LCA) is a technique developed to measure possible environmental impacts during the manufacture and use of a given product or service. Additive Manufacturing (AM) has proven to be suitable in several industries, especially wire and arc additive manufacturing (WAAM), offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and equivalent CO₂ emissions (CO₂e). This study aimed to develop a methodology to evaluate environmental indicators during the life cycle assessment, from gate-to-gate, in the production of two low-alloy carbon steel metal parts (flanges) using ER-90 wire and allowed identifying the main stages that most influence environmental indicators. The total energy consumption in the production of flanges 1 and 2 were, respectively, 10,239.0 MJ, 12,754.0 MJ and the total carbon footprint, respectively, 714.1 kgCO₂e kg^-1 and 749.3 kgCO₂e kg^-1.

Understanding the origins of life involves dealing with the unresolved question of how the first informational polymers and cell-like structures emerged from prebiotic chemistry. The formation of thermal proteinoids through the heating of mixtures of amino acids, leading to the spontaneous formation of protocells enclosed by membranes, presents a compelling model for the synthesis of polypeptides in an abiogenic context. Recent research has revealed the presence of electrical excitability and signal processing capacities in proteinoids, indicating the possibility of primitive cognitive functions and problem-solving capabilities. The present study provides a comprehensive examination of the features shown by heat proteinoids and their potential significance in the context of the artificial formation of polypeptides during the early stages of Earth’s development. Experiments showcasing the possibility for unconventional computing with proteinoids as well as modelling proteinoid assemblies into synthetic proto-brains are given. Proteinoids’ robust abiogenic production, biomimetic features, and computational capability shed light on potential phases in the evolution of polypeptides and primitive life from the primordial environment.

The study conducts a comparative life cycle assessment (LCA) analysis to assess the environmental impact of two different manufacturing processes used to produce transparent dental aligners. The former method consists of thermoforming a polymeric disc over 3D printed, customized models, while the second, more innovative approach involves the direct printing of aligners using additive manufacturing (AM), specifically applying digital light processing (DLP) technology. The analysis results highlight how adopting direct printing through AM brings significant advantages in terms of environmental sustainability, thanks to the substantial reduction in raw materials and electricity consumption. These drops translate into decreased potential environmental impacts across all impact categories considered within the EF 3.1 method. Furthermore, lowering the amount of raw materials needed in the direct printing process contributes to a notable decrease in the overall volume of waste generated, emphasising the environmental benefits of this innovative technique.

Life Cycle Assessment (LCA) methodology is increasingly prevalent in the quantification of environmental status in the building sector, following new legislative frameworks. Countries need to quantify and assess their environmental impacts as a previous base for regulation and decision making. In this context, standardised national data sets are being developed, based on consensus with manufacturers: sectoral Environmental Product Declarations. This study focuses on assessing these EPDs with the aim of providing relevant information for global decision-making, focusing on consistency and pointing out shortcomings. An assessment has been carried out both at national level, considering all sectoral EPDs and declared products, and at international level, with three common building materials (brick, steel and concrete). The results highlight the lack of traceability in the development and assessment of uncertainty, resulting in substantial discrepancies in reported impacts, especially in the later stages of the life cycle (up to 90% difference). Meanwhile, impacts such as Global Warming Potential or total renewable and non-renewable primary energy use show homogeneous values in the cradle-to-gate stages with differences generally less than 10%. The analysis of sectoral EPDs should be a design guide with environmental sustainability criteria, as the last section of this study attempts to focus on.

Certain services can help avoid environmental impact in larger contexts. However, there is no commonly agreed bottom-up methodology for calculation of the total net reduction effect of specific digital services. Life Cycle Assessment (LCA) is a common denominator for most methodologies. The most common method is the Attributional LCA (ALCA), and recently the emerging handprint ALCA estimating so-called positive environmental impacts. Moreover, Consequential LCA (CLCA) can be used to capture market effects. The third conceptual approach is Input-Output LCA. The purpose is to propose and test a new method based on some of the existing ones. The existing concepts are compared and a synthesis is made to create a practical but still useful method. The new method is applied to two illustrative cases in the Information and Communication Technology (ICT) domain; the introduction of a 5G enabled drone for pipe inspection and the 5G enabled health consultation. Compared to simplified ALCA, the difference between the absolute score for the baseline system and the target system changes up to 15% when the proposed simplified CLCA (SCLCA) method is used. The results show that SCLCA, when combined with analytical methods for expressing digital ICT services’ own impact, is a fruitful approach which is both practical and feasible.

The well-being in the people is a key aspect of the field of psychology. Hence, it is important to an-alyse the variables that are related to life satisfaction and happiness as perceived by individuals and that, therefore, increase their overall well-being. The main objective of this study was to ana-lyse the predictive capacity of emotional intelligence and perceived social support on both the level of life satisfaction and perceived happiness. A total of 380 psychology students completed the Trait Meta Mood Scale, the Multidimensional Scale of Perceived Social Support, the Satisfaction With Life Scale, and the Subjective Happiness Scale. The results show that both emotional intelligence and social support are related to and predictive of subjective happiness and life satisfaction. The importance of developing the components of emotional intelligence and promoting an adequate social network in young people is highlighted.

Several studies have shown that physical activity (PA) is related to physical and mental health. Yet, there are few studies on the frequency of PA as it relates to health and a healthy lifestyle. The purpose of this study was to investigate the relationship between the frequency of practicing different types of physical activities (dependent variables), living a healthy lifestyle (BMI, smoking and alcohol consumption), physical health (sum of all doctor visits except psychiatrists) and mental health (a sum of visits to psychiatrists) at different ages (independent variables). We fo-cused on three types of PA: (1) medium to high-intensity aerobic exercises; (2) low to medium intensity relaxing and stretching exercises, (3) outdoor leisure PA. 9,617 participants (ages: 19 -81) were included in the study (with health registries over a period of 10 years prior to a cross-sectional survey). Descriptive statistics and multinomial logistic regression on frequencies of three types of PA and factors related to health and healthy lifestyles, as well as age and sex, were performed in this study. The results indicate that a higher frequency of practicing PA had a higher probability of association with the following factors: lower BMI, less or non-smoking behavior (types 1 & 3); higher education (types 1 & 2); higher age (types 2 & 3) and better physical health (type 1). Occasional (practicing sometimes) PA, type 2, was positively associated with poorer mental health (higher number of psychiatrist visits). Women were more likely to practice PA type 2, and men – PA types 3 & 1. Conclusion: In general, a higher frequency of PA is related with better health and healthy life styles; with the exception of PA type 2 that is related to poorer mental health.

The human gut microbiota (GM) is a complex and dynamic ecosystem that hosts trillions of commensal and potentially pathogenic microorganisms. It is crucial in protecting humans from pathogens and in maintaining immune and metabolic homeostasis. Numerous studies have demonstrated that GM has a significant impact on health and disease, including Alzheimer’s disease (AD). AD is a progressive neurodegenerative disorder characterized by impaired short-term memory and cognitive deficits. Patients with AD have been reported to exhibit abnormalities in GM density and species composition. Oxidative stress (OS) has been implicated in the onset and progression of AD, however, the relationship between OS and gut microbiota in AD onset and progression is not clear. Twendee X®︎ (TwX), an oral supplement consisting of 8 active ingredients, has been shown to prevent dementia in mild cognitive impairment (MCI) in humans and substantially improve cognitive impairment in mouse models of AD. This positive effect is achieved through the potency of the combined antioxidants that regulate OS and therefore similar results cannot be achieved by a single antioxidant ingredient. To examine the impact of long-term OS elevation as seen in AD on the body and GM, we examined GM alterations during the initial OS elevation using a rat 2-week OS loading model, and examined the effects of TwX on OS and GM. Furthermore, using a questionnaire survey and fecal samples, we analyzed the impact of TwX on healthy individuals' gut bacteria and the associated effect on their quality of life (QOL). TwX was found to increase the number of bacteria species and their diversity in GM, as well as butyrate-producing bacteria, which tend to be reduced in AD patients. Additionally, TwX improved defecation condition and QOL. The gut bacteria function as part of the homeostatic function during OS elevation, and prophylactic administration of TwX strengthened this function. The results suggests that the preventative effect of TwX on dementia may involve the GM in addition to the other effects previously demonstrated.

Premenstrual syndrome (PMS) continues to impact the health outcomes and emotional well-being of reproductive-age women, globally. Several studies have provided conflicting evidence concerning the role of dietary approaches in improving PMS symptoms. Accordingly, this study aimed to evaluate the possible influence of a healthy diet and motivational strategies on PMS symptoms and health-related quality of life among Omani adolescents. This open-label, randomized, prospective controlled trial was conducted in two randomly selected secondary schools, in Al Seeb Willayah, in Muscat region. Adolescents with PMS symptoms, who were at grade 10 or 11, aged 16 years or above, had regular menstrual cycles and not known to have psychiatric disorder, were included in this study. Participants in the intervention group received an individual face-to-face dietary consultation and motivational phone consultation. The health outcomes, including the PMS symptoms in both groups, and quality of life, were recorded via a daily record of severity of problems questionnaire (DRSP) and the 14-item Self-Reporting-Based Perceived Stress Scale tools, respectively. The primary outcome was the differences in the mean premenstrual symptom scores between the two groups. Secondary outcomes included the quality of life and stress levels of participants. The study period was from 1 February and ended 30 June 2021. SPSS was used to analyze the data and intention-to-treat analysis was utilized.A total of 72 adolescents with PMS were randomized to the intervention and control groups (n=36 each). Both groups were similar at baseline (P-value>0.05). No significant association was found between healthy-diet and PMS symptoms (P-value>0.05). In addition, no significant association was found between healthy-diet and quality of life at follow-up (P-value=0.216). The outcomes of this study refuted any possible relationships between healthy diet and PMS symptoms. Accordingly, dietary consultations may not facilitate the clinical management of PMS symptoms in adolescent females.

The purpose of this study was to identify subgroups of quality of life (QOL) changes in breast cancer survivors (BCS) and to determine factors associated with subgroups of consistently low or deteriorated QOL. We enrolled 101 women recently diagnosed with breast cancer in South Korea and asked them to complete a questionnaire at baseline (within 1 month of diagnosis), 1 year later (Year 1), 2 years later (Year 2), and 3 years later (Year 3). We assessed QOL using the global QOL subscale from the EORTC QLQ-C30. We defined low QOL as a global QOL score 10 points below the mean score of the general population. Based on low QOL as defined in this study, we identified subgroups of QOL changes over 3 years. We identified four subgroups of QOL changes: improved (47.4%), stable (30%), continuously low (8.8%), and deteriorated (13.8%) and considered the last two categories (22.6%) as poor QOL. Logistic regression analyses demonstrated that significant determinants of poor QOL were insomnia at Year 1, fatigue and anxiety at Year 2, and fatigue, depression, and comorbidity at Year 3. In conclusion, persistent symptoms of insomnia, fatigue, anxiety, depression, and comorbidity are potential risk factors for poor QOL in BCS.

Venous leg ulcers still pose a significant medical problem worldwide. The complexity of the problem determines the need for further interdisciplinary activities that will improve the quality of life of treated patients. The study compared the quality of life of patients with venous leg ulcers who received local hyperbaric oxygen therapy or local ozone therapy procedures as a part of comprehensive treatment. The study included 129 patients (62 men and 57 women) with venous leg ulcers. Group I underwent local hyperbaric oxygen therapy (HBOT), group II - local ozone therapy (OZONE). In both groups, the patients' quality of life was assessed before the start of treatment cycle, as well as 10 weeks and 6 months after the completion of the treatment, by using the EQ-5D-5L questionnaire and the Polish shortened version of the SF-36 scale. After completing the respective therapeutic cycle, both groups showed a statistically significant (p<0.001) improvement the quality of life according to the EQ-5D-5L questionnaire and the SF-36 scale. Differences were noted between 1st examination (before treatment) and 2nd examination (10 weeks after treatment), as well as 3 examination (6 months after treatment). In the EQ-5D-5L assessment of anxiety and depression, self-care and activities of daily living 6 months after the end of treatment, better results were found in the group of patients treated with local hyperbaric oxygen therapy (p<0.001). In this group, 6 months after the end of the treatment, a statistically significantly higher result on the EQ-VAS scale was also obtained (73.09±19.8 points vs. 68.03±17.37 points, p=0.043). However, in the SF-36 assessment 6 months after the end of treatment better results - a statistically significantly lower value of the quality of life index - were recorded in the group of patients treated with local ozone therapy (103.13±15.76 points vs. 109.89±15.42 points, p<0.015). Hyperbaric oxygen therapy and local ozone therapy procedures have a beneficial effect on improving the quality of life of patients with venous leg ulcers.

The Single Site Order – a policy restricting staff from working at multiple long-term care homes – was mandated by the Public Health Agency of Canada to control the spread of COVID-19 in long-term care homes, where nearly 70% of COVID-19-related deaths in Canada occurred. This mixed methods study assesses the impact of Single Site Order on long-term care residents in British Columbia. Interviews were conducted (residents (n=6), family members (n=9), staff (n=18), and leadership (n=10) from long-term care homes (n=4)) and analyzed using thematic analysis. Administrative data was collected between April 2019 – March 2020 and April 2020 – March 2021 and analyzed using descriptive statistics and data visualization. Qualitative and quantitative data were triangulated and demonstrate staffing challenges became worse during implementation of the SSO resulting in the mental and physical health deterioration of LTC residents. Qualitative data demonstrated decreased time for personalized and proactive care, increased communication challenges, and increased loneliness and isolation. Quantitative data showed a decline in activities of daily living, increased antipsychotic medication use, pressure ulcers, behavioural symptoms, and an increase in falls. Addressing staff workload and staffing shortages during SSO-related policy implementation is essential to avoid resident health deterioration.

1960s Europe saw a large number of residential neighborhoods built to house those migrating from the countryside. Today, more than 50 years later, these neighborhoods suffer high levels of functional, social, and technical obsolescence. In response to this, University of Seville developed the Aura Strategy as an intervention methodology to find global solutions to issues in outdated neighborhoods. To provide visibility to this aspect of the Aura strategy, the retrofit proposal presented in this article provides a solution to improve the roofing of buildings in a case study neighborhood (Polígono de San Pablo, Seville) and an analysis of the results in terms of energy and financial savings for local residents. The results show that for a population of roughly 18,000 (in 2018), net savings, including energy and retrofitting costs, ranging from nearly 6.5 to over 8.6 million can be made over the 20-year life cycle span. Likewise, the results obtained on the reduction of thermal loads indicate a 72% decrease in energy consumption, equivalent to a saving of close to 4,500 tons of greenhouse gas emissions for the district and the entire life cycle time period, with the consequent benefits on the impact on air quality and and the fight against climate change. climate change.

Background: we aim to investigate attitudes toward vaccination, by analyzing empirical factors associated with vaccine acceptance in the Lazio region mpox vaccination (MpoxVax) campaign in Italy. Methods: all subjects who accessed to MpoxVax and signed the informed consent were prospectively enrolled in the MPOX-VAC Study and were asked to fill out an anonymous survey. Two endpoints were selected: ‘delayed acceptance’ and ‘early acceptance’, defined as access for vaccination &gt;60 and ≤30 days from the vaccination campaign starting (VCS), respectively. Results: over the study period 1717 individuals underwent vaccination: 129 (7%) &gt;60 [1588 (92.5%) ≤60] and 676 (60%) ≤30 days from VCS. A bisexual orientation, a lower education level and a worse perceived physical and mental health were associated with delayed access to vaccination. Being Pre-Exposure Prophylaxis (PrEP) users and, marginally, HIV positive, having a high perceived risk for mpox infection and reporting high-risk behaviors like the use of recreational drugs/chems, sex under the influence of drugs and/or alcohol and higher number of principal sexual partners, were associated with early access to vaccination. Conclusions: according to our data, risk awareness was a major determinant of early mpox vaccination acceptance. Conversely, worse perceived health status and a low educational level were critical factors associated with delayed vaccination.

The work analyses the way in which symptoms and life themes manifest in middle-aged adults diagnosed with major recurrent depression. Specifically, the relationships between symptoms, life themes, and life themes - symptoms have been analyzed. For this purpose, Spearman correlation, and the methods of Latent Semantic Indexing (LSI) were used. Seven symptoms and twenty-six life themes were identified in the patients analyzed as well as similarities of symptoms/life themes (at patient level), the ranking of the importance of symptoms on each life theme (at the level of the group of patients), the rankings of the similarities of life themes in relation to different symptoms or various groups of symptoms (at the level of the group of patients), and dysfunctional cycles of symptoms and life themes (at patient level). The findings only refer to the patients analyzed. Although our findings cannot be generalized, there is a possibility that some of them may also be encountered in other patients. However, the design of the work can be used to initiate other similar studies.

Coral recruitment is an important factor to coral reefs in maintaining their health. Currently, numerous coral reefs are facing extreme degradation, which protection and therefore rehabilitation practices are required to reverse. The present study explores the potential role of coral recruitment assessment by citizen scientists about the impacts of human influences towards coral reefs through measurement of coral recruitment values. Only a very small number of studies use forms of pre-launch assessment prior to reef restoration. These methods are able to properly guide vital decision-making information for reef rehabilitation methods and locations. In this initial study we observe significant relationships between reefs with higher coral recruitment values and their health. As compared to other average coral reef values, the reef we measured had higher recruitment values on average. Two sections of the reef had noticeably higher mean corals per square meter compared to average values, while a third section of the reef had a lower frequency. This section has been brought to concern through the pre-launch assessment, and has potential for rehabilitation through coral transplantation and a reduction of anthropogenic actions within the area.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

There are no theorems (proven theories) in the biological sciences. We propose that the 3 31 nt minihelix tRNA evolution theorem be universally accepted as one. The 3 31 nt minihelix theorem completely describes evolution of type I and type II tRNAs from ordered precursors (RNA repeats and inverted repeats). Despite diversification of tRNAome sequences, statistical tests overwhelmingly support the theorem. Furthermore, the theorem relates the dominant pathway for the origin of life on Earth, specifically, how tRNAomes and the genetic code may have coevolved. Alternate models for tRNA evolution (i.e., 2 minihelix, convergent and accretion models) are falsified. In the context of the pre-life world, tRNA was a molecule that via mutation could modify anticodon sequences and teach itself to code. We relate the clearest history to date of the chemical evolution of life on Earth. From analysis of tRNA evolution, ribozyme-mediated RNA ligation was a primary driving force in evolution of complexity during the pre-life to life transition on Earth.

In this work, we propose a generalized partially functional linear model, which not only models the relationship between multiple scalar and functional predictors and response, but also automatically estimates the link function. Specifically, we use the functional principal component analysis method to reduce the dimensionality of functional predictors, estimate the regression coefficients using the maximum likelihood estimation method, estimate the link function using the method of local linear regression, iteratively obtain the final estimator, and prove the asymptotic normality of the estimator. The asymptotic normality is illustrated through simulation experiments. Finally, the proposed model is applied to study the influence of environmental, economic, and medical levels on life expectancy in China. In the study functional predictors are the daily air quality index, temperature, and humidity of 58 cities in 2020 and scalar predictors are GDP and number of beds in hospitals.

Melasma is a common skin disorder of acquired hyperpigmentation that appears commonly on the face. Although asymptomatic, melasma causes psychosocial and emotional distress. This study aimed to assess melasma's severity on people with darker skin types, evaluate the effects of melasma on the Quality of Life (QoL), and establish QoL predictors in affected individuals. This was a cross-sectional analytic study that enrolled 150 patients who were diagnosed with melasma from three private dermatology clinics in Durban, South Africa. The severity of melasma and QoL were measured using a Melasma Area and Severity Index (MASI) score, and Melasma Quality of Life scale (MELASQoL), respectively. The factors associated with impaired QoL were also explored using the multivariate method and stepwise regression analysis. MASI score of Masi (β = 0.209, t = 2.628, p < .010), involvement of cheeks (β = -0.268, t = -3.405, p <.001), level of education (β = -0.159, t = -2.029, p =.044) and being menopausal (β = -0.161, t = -2.027, p =.045) were found to be predictors of QoL. A regression model to predict MELASQoL given these four predictors was developed. The significance of the equation can allow remote scoring of MELASQoL based on the four variables.

By definition, a cell is the smallest unit of biological life. This means that every living thing can be fundamentally narrowed down to a composition of cells working together for the furtherance of that being in existence. With the dawn dawn of the evolutionary theory that bespeaks of life commencing some 〜3.8 billion years ago with RNA strands that underwent evolution to become DNA, which led to what we have now as life in the world, or with the Panspermia hypothesis, assuming that life on Earth was seeded from space, what is being considered in this work pertains to the origin of life. In addition to the plethora of intuitive stances that concern the origin story of life, this work will only add to the these. The major hypothesis in this work is that the continuity of life, as pertaining to its procession from parent to offspring provides fundamental links to the origin of life and this is the major consideration that will be given. It is thus apparent that the cells that would be considered are germ cells and not somatic cells. A cursory look at the continuity of life, should give us clues as regards how life originated. We nonetheless, take into consideration the fact that some features due to its non-use have gone extinct, thus taking with them the needed knowledge to breaking even as regards our inquiry. Even at that, we propose that conjectures, hypothetically, can be made based on the physical evidence that is available to us today.

This work is the first part of a series of papers on a comprehensive analysis of the processes of prebiotic self-organization and protophotosynthesis on the surface of semiconductor minerals and in systems of natural dispersed semiconductors. Comprehensive analysis within the framework of the "semiconductor world" concept allows integrating a variety of models on a single physical basis - from ZnS world and FeS world (based on inorganic semiconductors) to the PAH world and aromatic world (including organic semiconductors). Thus, we do not put forward a new alternative hypothesis of chemical evolution - a new "chemical world", but only integrate the evolutionary and geochemical criteria of different "chemical worlds" into a single "physical world", which gives one the opportunity to reconstruct and predict the directions of chemical evolution according to the uniform principles of physical chemistry. In the first part of this series we consider photoinduced self-organization and "photo-controlled" evolution of the early protobiological systems performing solar energy conversion on the surface of dispersed semiconductor minerals capable of (photo)catalyzing and photosensitizing prebiological processes. The latter include a transition from the elementary cycles of photocatalytic reactions on the surface of semiconductors to protophotometabolic cycles and protophotosynthesis, from photophysical processes on the surface of mineral semiconductors to photoinduced membrane potentials, from photocontrolled sorption on the surface of such minerals to the formation of photosensitive protomembranes and selection of photosynthetic structures. The evolutionary approach to the analysis of protobiological mechanisms and protobioenergetics within the framework of the "semiconductor world" concept provides a new approach to the study of the last common point of divergence of protobiological systems, where the emergence principles of different energy supply schemes (like the energy source-specific photoautotrophy and substrate-specific chemoautotrophy) merge at the physicochemical level. The proposed integrating scheme is consistent with most biological, geological, and physicochemical concepts, which ensures its complete cross-checking and internal consistency.

Ankylosing spondylitis (AS) is a chronic inflammatory arthritis that affects the axial skeleton, causing intense pain, progressive joint destruction, and a gradual reduction in physical function. It has been recognized not only as affecting the axial skeleton but as a systemic disease. Since it also causes an increase in the rates of inflammatory bowel disease, psoriasis, acute anterior uveitis, and mental disorders affecting the quality of life. Furthermore, an association with neurological and cardiovascular events is documented. With the advent of biologics, treating AS dramatically changed due to its high efficacy and tolerable safety. AS can be treated with various biological treatments. Nevertheless, there are differences in traits, including rapidity of onset, long-term efficacy, safety profile, and influence on comorbidities. A better understanding of such traits enables clinicians to make the best decision for each patient, increasing persistence, extending medication survival, enhancing patient satisfaction, and reducing the disease effect of ankylosing spondylitis. In this article, we emphasize biologics' efficacy and safety profile in patients with ankylosing spondylitis. In addition, we discuss the impact of biologics on comorbidities and health-related quality of life.

This study examined the effect of the media usage environment, particularly TV and mobile devices, on advertisement acceptance, lifestyle, and psychological satisfaction. Hypothesis pathways and comparative structural mediating effects were analyzed. Media and Consumer Research public data were used for empirical analysis. A total of 6,640 people who participated in sports activities were included in the study. The results demonstrated that TV and mobile device usage environments had similar effects on advertisement acceptance. While TV did not influence the pursuit of personal life, mobile device use environments affected the pursuit of personal life. Mobile device use environments had a greater effect on individual psychological satisfaction than TV. Adoption had a mediating effect on the influence of media usage environments on the pursuit of personal life. The pursuit of a personal life had a significant mediating effect on the influence of media use environments on psychological stability. This study revealed no differences in the effects of new and traditional media on advertisement acceptance, while new media had a greater influence on lifestyle and psychological satisfaction.

Objective: The objective of our study was to explore the potential benefits of combining moderate alcohol consumption with regular vigorous physical activity on HDL-cholesterol levels and its potential positive impact on cardiovascular health. Material and method: The study comprised two groups: group A (102 patients) who consumed 1 gram of alcohol per day, specifically red wine, and increased their exercise levels in addition to their standard medical treatment, and group B (108 patients) who adhered only to their standard medical treatment. The patients were monitored for a year, during which various clinical parameters were observed. Results:Our study showed that moderate alcohol consumption, particularly red wine, along with increased physical activity levels, was associated with enhancements in exercise tolerance and elevated levels of HDL-cholesterol. Our findings suggest the efficacy of the intervention in improving lipid profiles, with the group that consumed alcohol as part of their treatment scheme, generally experiencing more pronounced positive effects. Statistically significant differences between groups in terms of angina evolution, AMI recurrence, or arrhythmias evolution were not found. However, there were important differences in terms of EF improvement and quality of life, with the alcohol consuming group displaying greater improvements in both aspects. Conclusions:In conclusion, our study emphasizes the potential benefits of combining moderate alcohol consumption, specifically red wine, with increased physical activity levels for improving exercise tolerance and enhancing HDL-cholesterol levels. However, further research and clinical trials are essential to fully understand the mechanisms and optimize the integration of these lifestyle elements for improved cardiovascular health outcomes.

Home enteral nutrition (HEN) is recommended for patients with nutritional requirements who can stay in the familiar environment. HEN guidelines recommend assessing health-related quality of life (HRQoL) to evaluate the effect of the treatment. NutriQoL® is a specific questionnaire developed to assess HRQoL in patients receiving HEN and validated in Spanish population. An observational, descriptive, and prospective study was carried out in two Spanish hospitals to describe the evolution of HRQoL, nutritional and health status in patients receiving HEN in routine clinical practice. Fifty-seven patients participated in the study, of whom 36 were followed-up after their inclusion. Most of them were at risk or moderate malnutrition (61.1%) or showed severe malnutrition (27.8%) at baseline. Patients with HEN showed an overall good HRQoL with a mean basal NutriQoL® score of 69.4, which increased to 74.3 after 12 months of follow-up; fifteen patients showed a clinically significant difference (≥4 points) after three months. The proportion of at-risk or severely malnourished patients decreased at the end of the follow-up period and, according to the physicians, their health status improved. Additionally, physicians considered useful the HRQoL evaluation in clinical practice. In conclusion, HRQoL is probably related to nutritional status improvement and, thus, should be considered for nutritional evaluation in clinical practice.

Quantification of the trade-offs among greenhouse gas (GHG) emissions, yield and farmers’ incomes is essential for proposing economic and environment nitrogen (N) management strategies for optimizing agricultural production. A four-year (2017–2020) field experiment (including four treatments: control experiment (CK), suitable utilization of fertilization (SU), emission reduction treatment (ER), and high fertilization (HF)) was conducted on maize (Zea mays L.) in the North China Plain. The Life Cycle Assessment (LCA) method was used in this study to quantify the GHG emissions and farmers’ incomes during the whole maize production process. The total GHG emissions of CK, SU, ER and HF treatments in the process of maize production are 10,755.2, 12,908.7, 11,950.1, and 14,274.5 kg CO2-eq ha−1 respectively, of which the direct emissions account for 84.8%, 76.8%, 74.9%, and 71.0%, respectively. Adding inhibitor significantly reduced direct GHG emissions, and the N2O and CO2 emissions from the maize fields in the ER treatment decreased by 30.0% and 7.9% compared to those in the SU treatment. Insignificant differences in yield were found between the SU and ER treatments, indicating that adding fertilizer inhibitors did not affect farmers’ incomes while reducing GHG emissions. The yield for SU, ER and HF treatments all significantly increased by 12.9%–24.0%, 10.0%–20.7% and 2.1%–17.4% compared to CK, respectively. In comparison with CK, both SU and ER significantly promoted agricultural net profit (ANP) by 16.6% and 12.2% with the mean ANP values of 3,101.0 USD ha-1 and 2,980.0 USD ha-1, respectively. Due to the high agricultural inputs, the ANP values in the HF treatment was 11.2%, 16.6% and 12.4% lower than those in the SU treatment in 2018–2020. In conclusion, the combination of N fertilizer and inhibitors was proved to be an environmentally friendly, high-profit and low-emissions production technology while sustaining or even increasing maize yields in the North China Plain, which was conducive to achieving agricultural sustainability.

In this paper we overview all analytical engineering solutions for corrosion problems in pressure vessels delivered over the past 60 years. We briefly detail strengths and weaknesses of existing approaches, thus demonstrating the need for novel uniform corrosion analysis methods for both current and new applications. To complement the review, we also present a new analytical model allowing to estimate the lifetime of pressured elastic vessels with mechanically assisted corrosion. Both internal/external pressure and internal/external corrosion are captured and dissolution driven corrosion is also considered. The readily implemented method improves existing analytical approaches and is shown to be effective for thin and thick shells, as well as various loading and corrosion intensity and geometrical conditions.

Objective: The objective of our study was to explore the potential benefits of combining moderate alcohol consumption with regular vigorous physical activity on HDL-cholesterol levels and its potential positive impact on cardiovascular health. Material and method: The study comprised two groups: group A (102 patients) who consumed 1 gram of alcohol per day, specifically red wine, and increased their exercise levels in addition to their standard medical treatment, and group B (108 patients) who adhered only to their standard medical treatment. The patients were monitored for a year, during which various clinical parameters were observed. Results:Our study showed that moderate alcohol consumption, particularly red wine, along with increased physical activity levels, was associated with enhancements in exercise tolerance and elevated levels of HDL-cholesterol. Our findings suggest the efficacy of the intervention in improving lipid profiles, with the group that consumed alcohol as part of their treatment scheme, generally experiencing more pronounced positive effects. Statistically significant differences between groups in terms of angina evolution, AMI recurrence, or arrhythmias evolution were not found. However, there were important differences in terms of EF improvement and quality of life, with the alcohol consuming group displaying greater improvements in both aspects. Conclusions:In conclusion, our study emphasizes the potential benefits of combining moderate alcohol consumption, specifically red wine, with increased physical activity levels for improving exercise tolerance and enhancing HDL-cholesterol levels. However, further research and clinical trials are essential to fully understand the mechanisms and optimize the integration of these lifestyle elements for improved cardiovascular health outcomes.

: This study investigates the workplace experiences of mothers of children with intellectual disabilities. These mothers may face challenges in balancing motherhood, disability, and employment. Therefore, it is important to understand the challenges they are facing and the mechanisms they use to cope with caregiving and work responsibilities in managing the stress that develops throughout this ongoing experience. The purpose of this research was to investigate the workplace experiences of single mothers of children with intellectual disabilities. A review of the literature was conducted. For this research, a qualitative methodology was adopted to gain an in-depth understanding of the mothers’ experiences. A narrative method was used for data collection. Thematic analysis was utilized to obtain a clear understanding. The findings suggest that mothers of children with intellectual disabilities face difficulties in balancing between caregiving for their child with a disability and their job responsibilities, in addition to showing that there is a lack of flexibility in the workplace, less awareness from colleagues and bosses of the challenges these mothers face, and a lack of organizational legislation that supports these mothers. According to our findings, workplaces should provide assistance to mothers of children with intellectual disabilities in order to ensure that they are not disadvantaged in their employment.

(1) Background: The goal of the study was to evaluate psychological tolerance and health-related quality of life (QOL) in head and neck (HN) cancer patients treated with definitive accelerated radiotherapy (DART); (2) Methods: Seventy-six recurrence-free patients eligible for the study, who were treated with DART in the CAIR-2 phase III clinical study (median of follow-up=47 months), completed EORTC QLQ-C30 with H&amp;N35 module, Hospital Anxiety and Depression Scale (HADS) and Visual–Analog Scales (VAS) of pain in HN and the neck / arm area.; (3) Results: The most dominating symptoms measured with QLQ-C30 were: fatigue (44/100), sleeplessness (39/100), financial problems (38/100) and pain (32/100). Within H&amp;N35 the highest scores were reported on the subscales of sticky saliva (60/100), mouth dryness (65/100) and increased intake of painkillers (50/100). Pain (VAS) was reported by 87% (HN area) and 78% (shoulder) of the patients, with a mean score of 3/10. One-third reported depressive mood (HADS≥15 points) with an average score of 12.5/42 p. The depressed group, who smoked more as compared to non-depressed before DART (96% vs 78%) and required steroids treatment (85% vs 58%) during DART, also scored significantly worse on 23 of 35 subscales of QLQ-C30 and H&amp;N35 and experienced more intense pain (VAS). Women, and less advanced patients scored better in several aspects of the quality of life; (4) Conclusions: Patients treated with DART struggle with low quality of life and persisting treatment-related symptoms including constant pain. HNC survivors, especially those, who are depressed, may require additional psychosocial, rehabilitation and medical intervention programs..

Background: The high prevalence of learning disabilities among children confirm that learning disabilities are surprisingly common. In absence of routine screening, many children still go undetected with a huge individual and family burden, while at the same time existing interventions are conflicting. The purpose of the study is to report on the design, implementation and evaluation of an innovative pilot intervention aiming to improve the quality of life of the family of students with specific learning disabilities. Method: For the purposes of this study, we used an experimental research design, using two groups (intervention and control). The intervention included four meetings with parents of children from the intervention group. To assess the quality of life of the students' family and the parenting style, the following measuring tools were used. They conducted at times and locations convenient to each participant. The instruments used to measure outcomes were two standard weighted questionnaires, the parenting style questionnaire and the family quality of life questionnaire. Findings: The results showed that the intervention program had significantly positive effects on both parenting style and children’s quality of life. Specifically, a decrease in parental authoritarianism and an increase in parental support were observed. Also, an increase in child-parent interaction, emotional and general well-being was found. Conclusion: The intervention program did improve the quality of life of the children by increasing all the variables related to the measurement of their quality of life.

The global construction sector contributes a significant share of total greenhouse gas (GHG) emissions. In Australia, infrastructure activity alone generates 18% of the GHG emissions budget. The use of low-embodied carbon building materials is crucial to achieving sustainability in the construction sector and to fulfill national and international climate goals. Industrial hemp (Cannabis sativa L.) is considered a promising feedstock for sustainable construction materials because of its biogenic carbon content, fast-growing cycles with low agricultural input requirements, and technical functionality which is comparable to traditional materials. This study has applied the life cycle assessment (LCA) guideline of ISO 14040:2006 to estimate the carbon footprint (CF) expressed in carbon dioxide equivalent (CO2eq) emissions of hemp-based building materials in Western Australia. The functional unit is 1 m2 of hemp-based board, and the system boundary includes cradle-to-gate stages, i.e., pre-farm, on-farm, and post-farm activities. The production of 1 m2 of hemp-based board is estimated to be - 2.302 kgCO2eq. Electricity from the public grid for lignin extraction during the post-farm stage is the main contributor to total CO2eq emissions (26%), followed by urea production (14%) during the pre-farm stage. Overall, the use of electricity from the SWIS during the post-farm stage accounts for 45% of total emissions. Sensitivity analysis shows that the CF of hemp-based boards is highly sensitive to the source of energy, i.e., total replacement of the SWIS by solar power decreases the CF from - 2.30 to -6.07 kgCO2eq (164%). The results suggest that hemp-based boards exhibit lower embodied GHG emissions compared to traditional materials, such as gypsum plasterboards.

The changes in consumer lifestyles have raised awareness of the variety of food options and packaging technologies. Active and smart packaging represents an innovative technology that serves to enhance the safety and quality of products. Smart packaging, as a subset of this technology, entails the integration of additives into packaging materials, thereby facilitating the preservation or extension of product quality and shelf life. This technological approach stimulates a heightened demand for safer food products with prolonged shelf life. Active packaging predominantly relies on the utilization of natural active substances. Therefore, the combination of active substances has a significant impact on the characteristics of active packaging particularly on polymeric blend like Polylactic acid (PLA) as a matrix. So, This review will summarize and explains how the addition of natural active agents influenced the properties related to the performance of active packaging through systematic analysis, providing new insights about the relationship between the types of active agents on physical-mechanical properties, bacterial colony reduction, and applications in foods packaging such as meat, fish, fruit, and vegetables. Through their integration, the market for active and smart packaging systems is expected to have a bright future.

Alcohol use disorder (AUD) is a chronic and relapsing biopsychosocial condition that leads to a wide range of medical, psychological, social, economic, and personal issues. The study investigated the predictors of quality of life (QoL) among male patients seeking treatment for AUD based on attention, cognitive instability, motor impulsiveness, perseverance, and self-control dimensions of trait impulsivity. The study also investigated the potential mediating effect of anxiety and alcohol use severity in this relationship. After an initial assessment, participants underwent comprehensive evaluations, including sociodemographic data, clinical history, and QoL domains. Evaluations also covered AUD severity, impulsivity dimensions, cognitive functions, craving intensity, depression, anxiety and self-efficacy. Multiple linear regressions were employed to identify associations between independent variables and QoL. Attention dimension of impulsivity and anxiety symptoms significantly predicted physical health QoL. Self-control dimension and severity of alcohol use disorder predicted psychological QoL. Indirect effect of attention dimension on physical health was significant [effect =-1.082,95% CI (-2.008, -0.3598)].The significance of impulsivity in influencing QoL for individuals with AUD has profound clinical implications. These findings underscore the importance of addressing anxiety and impulsivity in managing AUD, given their considerable impact, particularly on QoL, ultimately shaping treatment outcomes.

Hundreds of thousands of kilometers of communication and power (umbilical) cables and flowlines lie undersea worldwide. Most of these offshore cables and flowlines have reached or will soon be nearing the end of their service life, necessitating the need for a viable recycling approach to recover some valuable material, e.g., copper. However, separation into constituent materials has proven very challenging due to the highly robust design of the composite cables (and flowlines) to withstand service conditions and the tough external plastic sheaths that protect against seawater corrosion. Here, we summarize the findings of the cryogenic comminution of subsea cables and flowlines for an effective separation and recovery of component materials. Heat transfer analyses of complex multilayer flowlines and umbilicals were conducted to evaluate the time required for these structures to reach their respective critical brittle-transition temperatures. Subsequently, the time was used as a guide to crush the flowline and umbilical cables under cryogenic conditions. The results show that the flowlines and umbilical cables will reach the brittle-transition temperature after approximately 1000s (i.e., 17 min) of submergence in liquid nitrogen (LN). Comminution of the materials at temperatures near the brittle-transition temperature was proven relatively efficient compared to room-temperature processing. The present evaluation of heat transfer and lab-scale crushing will afford accurate process modelling and design of a pilot cryogenic comminution of decommissioned flowlines in an LN-doped atmosphere.

Abstract: Like other plants, every PV power plant will one day reach the end of its service life. Calculations show that 20,400 tons of PV waste will be generated worldwide by 2030 and 60.2 million tons by 2050, not including the mass of the support structure. Such large amounts of waste pose a potential threat to the environment and people if not properly managed. The paper analysed the options for dealing with PV waste, namely reuse, recycling and landfilling. For recycling as the best option in terms of environmental protection and circular economy, an overview of recycling technologies and the percentage of achievable recycling for the materials contained in each PV system component is given. In addition, the current situation of legislation and recycling of PV modules in Europe was examined with special reference to the Balkan countries. There are a small number of factories for recycling PV modules in Europe, but none in the Balkan countries. The main reason for this is the small amount of PV waste in these countries and consequently the economic unprofitability. For this reason, PV modules (after dismantling the aluminum frame and cables) are mostly disposed of as non-hazardous waste in landfills in these countries. Finally, the main barriers to faster implementation of PV module reuse and recycling are listed, along with guidelines for their removal. The cost of recycling Si modules is about ten times higher than the cost of disposal. To change this ratio in favor of recycling, cheaper recycling methods need to be developed and taxes on landfill disposal need to be increased.

Having as objective to reach a circular economy, it is important to maximize the Physical Asset’s Life Cycle. The evaluation of Physical Assets Life Cycle may have several approaches which may provide different results. These differences may not be very significant, but must be taken into consideration, because they have consequences in the manager decision. This permits to have a wider time interval to decide when to withdrawal the Physical Asset or to renewal it, and or if this ought to continue functioning because the profits are higher than the expenses, what allows to diminish waste and increase sustainability. These are some aspects that are discussed in this paper, which presents several models to evaluate the Physical Assets Life Cycle, considering the market value, devaluations methods and a more generalized way of Fisher’s Equation, which can include the Risk tax, among others. The results are discussed supported in data for simulation, which are used for each Econometric Model aiming to evaluate the differences among them. In all Models they are considered not only the expenses, namely of Investment and Functioning, but also the Profits, which permit to evaluate the Physical Asset Life Cycle in a holistic way. The models are very versatile, allowing to evaluate quantitatively the changing in the maintenance policies, the energy prices variations, the risk evaluation, the variation of profits according to the real market, and so on. The results demonstrated the robustness of the approach described and that maximize the Physical Assets Life Cycle allowing to minimize the consumption of world resources and, by consequence, it contributes for a more sustainable world.

This article obtains data through questionnaire survey, and then uses the Multiple Indicators Multiple Causes (MIMIC) Model to establish the Taoyuan City’s quality of life quantifying framework in a city-level community context. Statistical test results show that the reliability of overall model is high and is suitable for policy analysis. There are thirteen variables in the structural model that significantly affect the quality of life as well as eleven indicators in the measurement model that can significantly measure the quality of life. Then, half of the observations are substituted back to calculate the quality of life. Via ArcGis operation, it finds that the quality of life of Longtan District is the best as well as Dayuan District is the worst one. LISA cluster of quality of life illustrates hot spots areas are distributed in Longtan, Daxi, and Pingzhen Districts.

The wastewater circular economy (WW-CE) promises a solution to improve water and sanitation management worldwide. However, the transition from conventional to circular wastewater treatment plants (WWTPs) requires facilitation to aid in decision makers understanding of integral sustainability impacts of alternative WW-CE configurations. This research implemented Life Cycle Sustainability Assessment (LCSA), combining Life Cycle Assessment, Social Life Cycle Assessment and Life Cycle Costing with a Multi-criteria Decision Making (MCDM) model to quantify environmental, socio-cultural, and economic impacts of conventional WWTPs with the WW-CE. Two real WWTPs in Chile have embraced the WW-CEs and adopting the title of Biofactories. These were considered as case studies, compared under three scenarios to demonstrate the sustainability trade-offs of the transition from no sanitation to conventional WWTPs and Biofactory WW-CE configurations. Results demonstrated that the transition to WW-CEs improved integral sustainability according to the LCSA model implemented in both WWPTs. This study highlights the urgent need to adopt sustainable decision-making models to not only improve sanitation coverage, but also improve sustainability performance of the sanitation industry across the globe.

The study investigated the impact of traditional medicine on life expectancy in Nasarawa State, Nigeria. The study adopted a quantitative research approach. Purposive or judgmental sampling was used to elucidate the data set used for the study. Cross-sectional data were gathered with the help of a well-designed questionnaire from a total of three hundred and fifty-seven (357) respondents who were available for the survey. The data set collected was analysed using descriptive and linear regression using Ordinary Least Squares (OLS). From the results, 53%, 87%, and 56% were male, below 50 years old, and in the low-income class, respectively, suggesting that the bulk of the respondents under investigation were male, young, and had rather modest incomes. Also, 53% were married, and all had one form of formal education. 67% of respondents acknowledge using traditional medicine; however, the majority of respondents preferred Orthodox medical care over alternative kinds of care. Traditional medicine (TM) and factors that contribute to the advancement of traditional medicine (FITM) have a negative impact on life expectancy, according to the regression analysis. On the other hand, TM has no statistically significant impact on life expectancy, despite FITM having a statistically significant effect at the 5% level. All available data, however, indicates that TM and FITM have an impact on life expectancy, either directly or indirectly. Based on the results, this study concluded that traditional medicine has the potential to significantly increase life expectancy in Nasarawa State and throughout Nigeria. The study recommends that traditional health professionals, stakeholders, and concerned government agencies should put efforts in place to improve and promote modern traditional medicine among the people, especially its effectiveness and medicinal quality, increase its accessibility to people, and efficiently regulate its prices to increase its affordability for low-income earners

Advanced composite materials have drawn significant interest in the last years as an alternative to traditional materials due to their higher performance. However, industry struggle to provide low-cost, higher occupational safety, lower footprint with composites, making them suitable for holistic analyses. Therefore, the material design becomes an essential element that can impact the competitiveness, particularly in terms of productivity, circularity, safety, sustainability, and quality of the value chain. The Material Design-for-eXcellence is a state-of-art methodology for material performance multi-dimensional assessment along its life cycle phases, either useful to support ma-terial selection for new products or also to new material design support optimizing resource effi-ciency. In this methodology, the material behaviour and its multiple characteristics assessment, and the manufacturing processes efficiency are evaluated. The framework considers the analogy of product design holistic approaches, as Lean Design-for-X, to organize and assess the mul-ti-dimensional performance for each “X” Material Property. In this work, it was possible to observe that the bio-based composites solutions could be a good sustainable alternative for several sectors. Every day researchers are creating more new materials, having a diversity of properties at different scales, Material Design-for-eXcellence must also in the near future consider other factors. Hence, additional studies are thus foreseen to explore and develop this new tool.

Building carbon footprint analysis is a key instrument for assessing the impact of different constructions on climate change. Several standards and methodologies are available to calculate the footprint of buildings, including standards and norms, life cycle assessment (LCA), and dedicated software tools. The use of BIM software for these calculations is both scientifically justified and very practical. This scientific publication focusses on the application of a BIM-based research methodology for the analysis of the carbon footprint of a single-family house. The research process included the following steps: (i) design of a single-family house with timber frame construction using Archicad BIM software, (ii) simulation of the building energy performance using the EcoDesigner Star plug-in, (iii) life cycle assessment (LCA) using the plug-in for Archicad, (iv) preparation of a second model with traditional masonry construction for comparison, and (v) comparative analysis of the single-family house models with timber frame and masonry construction. Analysis of the results highlights significant differences in CO2e emissions between masonry and timber buildings and the varying impact of individual elements on the total CO2e emissions of the buildings studied. These findings are relevant for future work on sustainable building design and construction, which aims to minimise negative environmental impacts. The goal of minimising the cumulative carbon footprint of buildings is critical to achieving the Sustainable Development Goals and combating climate change.

Buildings can play an important role in reducing GHG emissions through increased energy efficiency. The European Commission issued a proposal in 2021 suggesting that all new buildings should be “zero-emission Buildings” (ZEB), aiming at a zero GHG emission building stock by 2050.The extent to which ZEB can contribute to reduced GHG emissions, however, varies between countries, due to different energy systems. It is also important to consider other environmental effects to avoid that climate benefits come with unintended consequences.Here, we explore the life-cycle environmental performance for a ZEB in a case where electricity and heating is largely fossil-free. The assessment concentrates on i) environmental impact of the use stage in relation to the product stage, ii) the interrelation between different energy sources, with attention on household electricity, and iii) the performance for more impact categories than primary energy use and climate change. While our results generally support the use of ZEBs from an environmental perspective, they also show that the climate benefit in this setting is marginal. However, given that energy systems are connected and energy savings in one place can reduce the demand for fossil energy elsewhere, the climate benefit of ZEBs is likely underestimated. Besides methdological implications for future studies, this indicates that current EU policy is promising, as incentives for implementation of ZEBs is unaffected by domestic effects.

The health of inmates living in a restricted environment are affected by oral health behaviours and is related to their oral health-related quality of life (OHRQoL). We investigated oral health behaviours and oral symptoms among male inmates and analysed factors related to OHRQoL. Three hundred and seventy-six male inmates in two prisons were investigated using a self-reported questionnaire. The survey items included oral health behaviours, oral symptoms, self-esteem, and OHRQoL level. We analysed cross-correlations and factors related to OHRQoL. Toothbrushing after lunch and dinner was practiced by 83.5% of male inmates. ‘Food impaction’ was experienced by 45.4%. The OHRQoL level among male inmates was low, at 39.90 points. A hierarchical multiple regression model that controlled for general characteristics identified the following OHRQoL factors, in order of significance: trouble biting/chewing (β = -0.307), toothache (β = -0.154), temporomandibular joint disorder (β = -0.099), and periodontal health (β = 0.089). Self-esteem and OHRQoL were not significantly correlated. To ensure oral health in male inmates, the results of this study suggests that an oral health education programme, as well as provision of adequate dental care services, is required to increase appropriate oral health practice rates.

This paper utilizes a life cycle assessment to evaluate the energy resources and environmental impacts of three heating systems. In the first step, life cycle assessments (LCAs) are prepared for the renewable, conventional, and combined systems. The system boundary of the LCA method is "cradle to gate," which means it includes the entire life cycle of a product or process. This includes energy supply, transport, energy generation, and operational energy use. The system scenarios were compared based on ecological and energy loads in the second step. Primary energy, resources, emissions, and environmental potentials are calculated for the system scenarios using the life cycle assessment methods CML 2016 and ReCiPe 2016. Finally, models for environmental reliability and complex decision-support tools have been developed. This work addresses two main questions: how to characterize the environmental and energy impacts of the systems under study, and what is the optimal scenario for the system? The research results show that the gas boiler system has a greater environmental impact. The most significant differences between the systems relate to the degrada-tion of abiotic fossil fuels when using a gas boiler and the process of acidification when using an electric heat pump. The results can be used to develop sustainable heating systems with reduced environmental impacts and enhanced energy efficiency.

Emerging evidence demonstrated that using a new manufacturing technology to produce γ-aminobutyric acid (GABA)-fortified oolong (GO) tea could relieve human stress and exert versatile physiological benefits. The purpose of this human research aims to investigate therapeutic effects of daily GO tea consumption on the improvement of blood pressure, relaxation-related brain waves and quality of life (QOL) during a period of 28 consecutive days. Total polyphenols, major catechins and free amino acids were analyzed via HPLC assay. Changes of heart rate, blood pressure, α-brain wave (index of relaxation) and eight-item QOL score were investigated on day 0, 7, 14, 21 and 28, respectively. The chemical analysis results showed that GO tea contained the most abundant amino acids and GABA, contributing to the relaxation activity. Among all study participants, daily drinking GO tea could reduce systolic blood pressure on day 21 and diastolic blood pressure on day 28 (p &lt; 0.05, respectively). For participants with pre-hypertension, GO tea could effectively reduce heart rate, systolic and diastolic blood pressure on day 28 (p &lt; 0.05). At the end of the study, incremental changes in alpha-brain wave and QOL scores were also demonstrated (p &lt; 0.05, respectively). This study recommended that GO tea might potentially serve as a natural source of alternative therapy to benefit blood pressure, stress-relief and QOL.

The performance of bearings plays a pivotal role in determining the dependability and security of rotating machinery. In intricate systems demanding exceptional reliability and safety, the ability to accurately forecast fault occurrences during operation holds profound significance. Such predictions serve as invaluable guides for crafting well-considered reliability strategies and executing maintenance practices aimed at enhancing reliability. In order to ensure the reliability of bearing operation, this article investigates the application of three advanced techniques—Maximum Correlation Kurtosis Deconvolution (MCKD), Multi-Scale Permutation Entropy (MPE), and Long Short-Term Memory (LSTM) recurrent neural networks—for the prediction of the remaining useful life (RUL) of rolling bearings. Each technique's principles, methodologies, and applications are comprehensively reviewed, offering insights into their respective strengths and limitations. Case studies and experimental evaluations are presented to assess their performance in RUL prediction. Findings reveal that MCKD enhances fault signatures, MPE captures complexity, and LSTM excels in modeling temporal patterns. The root mean square error of the prediction results is 0.007. The fusion of these techniques offers a comprehensive approach to RUL prediction, leveraging their unique attributes for more accurate and reliable predictions.

Mechanical circulatory support has proven effective in managing postcardiotomy cardiogenic shock by stabilizing patients' hemodynamics and ensuring adequate organ perfusion. Among the available device modalities, the combination of extracorporeal life support and a microaxial flow pump for left ventricular unloading has emerged as a valuable tool in the surgical arma-mentarium. In this publication, we provide recommendations for the application and weaning of temporary mechanical circulatory support in cardiogenic shock patients, derived from a con-sensus among leading cardiac centers in German-speaking countrie

In the food sector, packaging is one of the important steps that ensures the safe, unspoiled, min-imum cost of storing, transporting and delivering the food that goes into production to the con-sumer. Food spoilage caused by foodborne pathogens and microorganisms is a serious problem in the food chain, reducing the shelf life of foods. Therefore, consumers' demands for more natural, disposable, biodegradable and recyclable antibacterial food packaging materials have considera-bly increased. This review covers a comprehensive current literature review of antibacterial food packaging, which includes with titles antibacterial agents, organic acids and other compounds, enzymes, bacteriocins, natural extracts, essential oils, application of encapsulation and antimi-crobial packaging. Research findings on antimicrobial food packaging used to extend the shelf life of foods were collected from online databases such as PubMed/MedLine, Wiley Online Li-brary, Scopus, Web of Science, and Google Scholar. In this review, the activities of different bio-materials and compounds used to extend the shelf life of foods were compared

Quality of life (QOL) is based on their perception of their position in life in respect to their goals, expectations, standards, and concerns, as well as their culture and value systems, their workflow and workplace situations while it influences quality of services. In this study we aim to report on dental and nursing academians’ QOL and well-being at the end of the third year of the COVID-19 pandemic. The World Health Organization Quality of Life-BREF Scale (WHOQOL-BREF) tool, recording Physical, Psychological, Social and Environmental dimensions of QOL, was used. The WHOQOL-BREF was modified on a spiritual, coaching/mentoring approach in a two-step designing and validated procedure. The modified SHQOL-BREF (Spiritual Healthcare version) designed for this study, was uploaded, and filled in online during April-June 2023. Staff (N=120, 75% female) of both departments of Dentistry (44.2%) and Nursing (55.8%) of the National and Kapodistrian university of Athens, participated in anonymity. QOL in terms of physical health was reported at a higher level (M=72.2 points) compared to social relationships (M=69 points), psychological health (M=65 points) and environment (M=59 points) (scores reported in 0-100 score). Overall QOL was rated at 66 points while satisfaction from health at 72 points. Job satisfaction (M1=3.2) and spirituality (M2=3.0) were reported at a medium level in a 5-point scale, while personal beliefs and values were reported at a high level (M3=4.0). Participants age presented a significant, moderate to strong effect on physical health [F(3,97)=2.89, p&lt;.05, η2p=.08] and on environment [F(3,97)=2.80, p&lt;.05, η2p=.08] and marital status on social relationships [F(1,97)=9.66, p&lt;.05, η2p=.09]. Married participants reported consistently higher levels of QOL compared to single participants, for all age groups. Department had a significant moderate effect on social relationships (F(1,97)=5.10, p&lt;.05, η2p=.05) and education a significant moderate to strong effect on psychological health (F(2,97)=3.74, p&lt;.05, η2p=.07). PhD level participants in both departments presented higher levels of psychological health compared to lower educational levels. Also, participants from the department of Dentistry reported higher levels of social relationships QOL in all educational groups, compared to the department of Nursing. Strategic planning on sustainability and QOL initiatives should be introduced after the COVID-19 pandemic for dental and nursing academic personnel to promote resilience and QOL scores.

Background: Peyronie’s disease (PD) represents a challenging urological disease, due to not optimal post-operative surgical outcomes. We aim to evaluate if vacuum erection devices (VED) treatment before pe-nile curvature surgery is able to improve the post-operative surgical outcomes. Methods: All enrolled patients were assigned to the following groups: a) treatment group, VED treatment (3 times per week) starting 3 months before surgery and (3 times per week) one months after surgery and b) control group, VED treatment (3 times per week) one months after surgery. Follow-up urologic visits were scheduled at 3 and 6 months after surgery and the two groups were compared. Results: Thirty-eight patients have been enrolled (median age 67 years, 57-74, IQR), 20 in the treatment group and 18 in the control group. At the follow-up visits, the two groups are different in terms of IIEF-5 (26 vs 24; p=0.02), ‘yes’ to SEP2 and 3 (85% vs 55%; p<0.001, 85% vs 50%; p<0.001, respectively) and PDQ (-16 vs -11; p=0.03). Complete correction of penile curvature was achieved in 36 patients (94.7%). In the treatment group, no hourglass deformity has been reported, while in the control group 1 patient reported a mild hourglass deformity. In the treatment group, we obtained a longer total penile length (median +1.5 cm). The overall satisfaction rate was 98% in the treatment group and 96% in the control group. Conclusions: The VED treatment before penile curvature surgery in patients affected by PD is able to improve the post-operative surgery.

In the past years, consumers have increased their interest to buy healthier food products, rejecting those products with more additives and giving preference to the fresh ones. Moreover, the current environmental situation has made society more aware of the importance of reducing the production of plastic and food waste. In this way and considering the Food Industry need of reducing the food spoilage along the food chain, edible coating has been considered as an eco-friendly food packaging that can replace traditional plastic packaging providing an improvement in the product’s shelf-life. Edible coating are thin layers applied straightaway on the food materials’ surface, that are made of biopolymers that usually incorporate other elements, such as nanoparticles or essential oils, to improve their physicochemical properties. These materials must provide a barrier that can prevent the pass of water vapor and other gasses, the microbial growth, the moisture loss, and the oxidation, so the shelf-life could be extended. The aim of this review was to compile the current data available to give a global vision of the formulation process and the different ways to improve the characteristics of the coats applied in both fruits and vegetables. In this way, the suitability of compounds in by-products produced during the Food Industry chain were also considered for the edible coating production.

In contrast to some low molar-mass per- and polyfluoroalkyl substances (PFASs), well-established to be toxic, persistent, bioaccumulative and mobile, fluoropolymers (FPs) are water insoluble, safe, bio-inert, durable niche high performance polymers which fulfil the 13 polymer of low concern (PLC) criteria in their recommended conditions of use. In addition, more recent innovations (e.g., the use of non-fluorinated surfactants in aqueous radical (co)polymerization of fluoroalkenes) from industrial manufacturers of FPs are highlighted. This review also aims at showing how these specialty polymers endowed with outstanding properties are essential (even irreplaceable since hydrocarbon polymer alternatives used in similar conditions fail) for our daily life (electronics, Energy, optics, internet of things, transportation, etc) and constitute a special family a part from other “conventional” C1-C10 PFASs found everywhere on the Earth and Oceans. Furthermore, some information reports the recycling (e.g. the unzipping depolymerization of polytetrafluoroethylene, PTFE, into TFE), end of life of FPs, their risk assessment, circular economy and regulations. Various researches are devoted to Environment involving FPs, though they represent a niche volume (with a yearly production of 330,300 tonnes) compared to all plastics (with 460 million tonnes). Complementary to other reviews on PFASs, which lack of such above data, this review presents both fundamental and applied strategies as evidenced by major FP producers.

Parasitic diseases are among the most serious public health problems in developing countries, causing high mortality and economic burdens. The Trypanosomatidae family includes Leishmania spp. and Trypanosoma cruzi, which cause leishmaniasis and Chagas disease, respectively. Both these parasites are among the major agents of neglected tropical diseases (NTDs). Leishmaniasis is currently the second most widespread vector-borne parasitic disease after malaria. The World Health Organization (WHO) records approximately 0.7-1 million newly diagnosed leishmaniasis cases each year, resulting in approximately 20,000-30,000 deaths. Also, 25 million people worldwide are at risk of Chagas disease and an estimated 6 million people are infected with Trypanosoma cruzi. Despite the similarity of the parasites, the evolution of the disease and the clinical indexes are explicitly different in African, Asian, and American forms of infection. Clinical therapies are associated with drug resistance and side effects. As a result, the discovery of novel therapeutic agents has emerged as a top priority and a promising alternative. Peptide-based drugs are an attractive class of therapeutic agents. They are recognized for being highly selective and effective, as well as safe and well tolerated. Moreover, they are now being explored in the development of novel therapeutics for a variety of health disorders, including oncology, endocrinology, metabolic, cardiovascular, and bone diseases. In addition, they are being explored in tropical diseases such as leishmaniasis and Chagas disease. We will discuss current knowledge regarding the parasite life cycle, signs and symptoms, diagnosis, and treatment options for leishmaniasis and Chagas disease.

The operating theatre represents a key contributor to healthcare-derived emissions. Here, we outline the carbon footprint of a lumbar microdiscectomy at our regional unit in Greater Manchester, with the use of AI technology. In doing so, we aim to define the extent of the environmental impact and identify carbon hotspots for sustainable change. Our unit of analysis covered the start of the patient journey into hospital through to the final outpatient appointment. Publicly available and locally sourced data was used. An inventory analysis of two lumbar microdiscectomies was conducted. Each item was categorised reconciled against our AI-powered ‘CO2 analysis’ database. Kilograms of carbon dioxide equivalent (kg CO2e) was chosen as the primary measure of impact. An average lumbar microdiscectomy at our trust generates 477.73kg CO2e. The operation (173.89kg CO2e, 36.40%) and the inpatient stay (144.67kg CO2e, 30.28%) constituted the biggest contributors. Single-use intraoperative equipment contributed to over three-quarters of the total emissions from the operation. By defining the environmental burden of elective spinal surgery, we have identified carbon hotspots to target for sustainable change. Substituting polluting elements for carbon-friendly alternatives and challenging the single-use culture, modern healthcare systems can help pave the way to a ‘net zero’ healthcare system.

Caring for an ill or disabled relative can present significant challenges that may exceed the per-sonal resources of the caregiver. Young carers (YCs) often take on this role, providing support to family members or friends, which can have far-reaching effects on various aspects of their lives. This study involved 235 adolescents, 106 YCs and 129 non-carers (NCs), who completed ques-tionnaires assessing life satisfaction, social support, family functioning, academic functioning, and caring activities. Group effects measured with MANOVA and MANCOVA (controlling for age effects), showed YCs to have higher amounts of caregiving activities than NC (as expected) but lower satisfaction with life. Hierarchical regressions also found that, for YCs, academic func-tioning, social support and the negative impact of caregiving predicted satisfaction with life; and that the negative impact of caregiving on YCs is explained by their family functioning and the amount of their caregiving activities. For NCs, only academic functioning, social support and family functioning predicted satisfaction with life. In conclusion, caregiving has a negative im-pact on YC’s life satisfaction, but this effect is determined by their social support, academic func-tioning and negative impact of caring, which in turn depends on their familiar functioning and amount of caring activities.

Ants have a very sophisticated olfactory system; their communication is based on the interpretation of chemical trails known as semiochemicals. The escamolera ant (Liometopum apiculatum), has behaviors and physiological responses is induced by semiochemicals, without however, these have not been studied. Using an electronic nose analysis (e-nose) and chromatographic techniques, semiochemicals of L. apiculatum in nests, foraging trails and dissected the gasters were evaluated. Data were analyzed with multivariate statistics and a logistic regression model based on predictors (ant counts) and the semiochemicals identified in pre-season (PRE), season (TEM) and post-season (POS) of larval collecting. From the general pattern of volatiles with a natural separation in POS and a partial distribution between PRE and TEM 32 semiochemicals were identified inside the nests, those who can induce the behavioral responses of trail-following, alarm, aggression, and nestmate recognition. Trail counts indicated that ant traffic was higher in POS and that the presence of certain semiochemicals (response variable) have good fit in the model regression. These findings are intended to provide useful information and support decision-making for the conservation and sustainable use of L. apiculatum in central Mexico.

Medium-deep Borehole Heat exchanger (MBHE) has been widely paid attention for building heating. In order to avoid the thermal interference of adjacent MBHEs, temperature distribution characteristics of medium-deep rock-soil was investigated in this work. The evolution on maximum rock-soil thermal affected radius (MTAR) in full life cycle was further analyzed. The results showed that the rock-soil thermal affected area (RTAA) continuously expands in both radial and vertical directions during a heating season. Several factors of thermal extraction load, fluid velocity, geothermal gradient and pipe length have main impacts on the RTAA in vertical direction. Rock-soil thermal conductivity affects the RTAA in both radial and vertical directions. In non-heating season, temperature difference of rock-soil in radial direction dominates the temperature recovery in the first year while geothermal flow nearly dominates temperature recovery after 20 years. The thermal affected radius (TAR) in the 30 th year could be determined as an effective MTAR in full life cycle. In order to decrease installed distance of adjacent MBHEs, a new well layout form by deflecting borehole was proposed. The recommended deflection angle is equal to or larger than 4 times TAR angle. This work provides scientific reference for promoting application of multiple MBHE arrays.

This study investigated mortality discrepancies in Korea, 2000-2020, with a focus on age, gender, and preventable causes of death, and their impact on life expectancy at birth. The study utilized data from Korean Standard Classification of Diseases and OECD/Eurostat lists of preventable and treatable causes of death and employed Arriaga's method. Noteworthy findings revealed gender disparities in life expectancy increases, with male gaining an advantage over females from 2000-2020 (8.142 years for males versus 6.806 years for females). The most significant increase in life expectancy was found to be in males aged 70-74 and females aged 75-79. The gender gap in LEB is narrowing and that the main age group contributing to the gender gap are getting older. Reduced gains in life expectancy at birth resulted from avoidable mortality, contributing 57.3% to the increase. Cerebrovascular disease and transport accidents were positive contributors, whereas suicide and certain cancers were negative contributors. The changes in mortality for individuals aged 65 and over had an impact of 45.44% (males) and 71.01% (females) on life expectancy gains. This study offers a novel approach in evaluating avoidable mortality and life expectancy, having the potential to improve international health indicators and inform health policies.

Supermarkets in Port Harcourt (PH) city, Nigeria, predominantly rely on diesel electricity generation due to grid instability, leading to high cost of electricity prices. Although solar photovoltaic (PV) systems have been proposed as an alternative, these supermarkets have yet to adopt them, mainly due to high investment costs and a lack of awareness of the long-term financial and environmental benefits. This paper examines the technical and economic practicality of a PV system for these supermarkets using the PVsyst software and a spreadsheet model. Solar resources showed that PH has a daily average solar radiation and temperature of 4.21 kWh/m2/day and 25.73℃, respectively. Market Square, the supermarket with the highest peak power demand of 59.8 kW, and a 561 kWh/day load profile, was chosen as a case study. A proposed PV system with a power capacity of 232 kW, battery storage capacity of 34,021 Ah, a charge controller size of 100 A/560V, and an inverter with a power rating of 60V/75 kW has been designed to meet the load demand. The economic analysis showed a $266,936 life cycle cost, $0.12 per kWh levelized cost of electricity (LCOE), 4-year simple payback time, and a 20.5% internal rate of return (IRR). The PV system is feasible due to its positive net present value (NPV) of $165,322 and carbon savings of 582 tCO2/year.

Rapid climate change requires more powerful and precise modeling methods to forecast future climate variability. The GSTARIMA Model is efficient, combining space-time analysis with the Autoregressive Moving Average (ARIMA) Model. The integration of heteroscedasticity error and the Kriging method can strengthen the Model's ability to handle the problem of non-constant error variance in the GSTARIMA Model and forecast at unobserved locations of climate observations. This paper's Systematics Literature Review (SLR) is presented comprehensively with the principal aim of developing a thorough understanding of applying the GSTARIMA Model with heteroskedasticity error and the Kriging Method in climate forecasting following the Data Analytics Lifecycle methodology. The Systematic Literature Review (SLR) process consists of three main stages. We sourced the articles from databases such as Scopus, Dimensions, and EBSCO-Host The subsequent stage involved conducting a comprehensive literature review using the PRISMA method to ensure rigor and depth. Additionally, we performed bibliometric analysis to enhance rigor. Lastly, we conducted a gap analysis session to scrutinize existing research on the GSTARIMA Model and identify new opportunities. This literature review reveals that integrating GSTARIMA Model with heteroscedasticity errors and the Kriging method is suitable for climate forecasting. This research inspires researchers to contribute to the improvement and refinement of the Model, making it a more potent and valuable tool in climate forecasting.

Purpose: To examine associations between subjective quality of life and other socio-demographic variables and to explore differences in experiences of people with different levels of quality of life (low, moderate, high). Materials and methods: Semi-structured interviews and standardized measures of mobility, function, health-related quality-of-life, and quality-of-life were used to collect the data for this mixed-method study. Results: Twenty-four participants were interviewed with an average age of 55 years and 54% were male. High quality of life, according to quantitative analysis, was strongly associated with being male, attending rehabilitation, and being married. The qualitative findings supported the quantitative findings and also revealed that people with a low quality of life felt the neighborhood-built environment was not supportive of people with incomplete spinal cord injury who can walk. Participants who reported a low/ moderate quality of life reported feeling devalued by able-bodied people and that their mobility was getting worse over time. Conclusion: Findings suggest that those with incomplete spinal cord injuries who can walk could benefit from improved quality of life by modifying their social and neighborhood's built environment. For instance, sensitivity training for the general population could help to reduce negative attitudes and misperceptions about invisible impairments and promote inclusion.

In view of the increasing age of cardiac surgery patients, questions arise about the expected postoperative quality of life and the hoped-for prolonged life expectancy. Little is known so far about this weighting by the patients concerned. This study aims to obtain information on the patient’s preferences. Between 2015 and 2017, data from 1349 consecutive patients from seven heart centers in Germany undergoing cardiac surgery were analyzed. Baseline data regarding the patient’s situation as well as a questionnaire regrading quality of life versus lifespan were taken preoperatively. Patients were divided by age into 4 groups: below 60, 60-70, 70-80, and above 80 years. As a result, if one had to decide between quality of life and length of life, about 60% of the male patients decided for quality of life, independent of their age. On the other hand, female patient’s decision for quality of life increased significantly with age, from 51% in the group below sixty to 76% in the group above eighty years. This finding suggests that the female patients adapt their preferences with age whereas male patients do not. This should impact further treatment decisions of elderly patients in cardiac surgery within a shared decision-making process.

In this paper, we consider a pursuit-evasion game of inertial players, where pursuer’s control is subject to integral constraint, and evader’s control is subject to geometric constraint. In the pursuit problem, the main tool is the strategy of parallel pursuit. Sufficient conditions are obtained for the solvability of pursuit-evasion problems. Also, the main lemma describing the monotonicity of an attainability domain of the evader is proved and an explicit analytical formula for this domain is given. As one of the important results of our paper, the Isaacs Life-line game is solved for a special case.

Background: Micronutrient deficiencies are common at the time of cancer diagnosis and are associated with worse prognosis. Little is known about them in cancer rehabilitation. Methods: Data from routine health related quality of life (HRQOL) were analyzed at an inpatient cancer rehabilitation center. Rehabilitation patients completed the EORTC QLQ-C30 questionnaire before and after multidisciplinary rehabilitation treatment, and three month after discharge. Selenium and zinc status was measured in whole blood at these three time points. In case of selenium deficiency up to 600 µg selenium per day as sodium selenite was supplemented. Results: A total of 271 patients (breast, colon, and pancreatic cancer) were included in the analysis. There was clinically meaningful improvement in many domains of the EORTC QLQ-C30 during rehabilitation. However, effect often waned in the three months after. Prevalence for selenium deficiency varied between 34 to 90 percent depending on cancer type (breast &lt; colon &lt; pancreas). In contrast, zinc deficiency was rare. Daily selenium supplementation of 600 µg was more efficient to correct selenium deficiency compared to 300 µg selenium per day. Rehabilitation and increasing selenium status after rehabilitation were associated with improved global quality of life, physical and emotional functioning, and fatigue. In cancer patients with decreasing selenium status, values of global quality of life, physical and emotional functioning, and fatigue were back to the values at the beginning of rehabilitation. Conclusions: Selenium deficiency is common in cancer patients admitted to a cancer rehabilitation clinic. Selenium supplementation during rehabilitation effectively corrected selenium deficiency in most cases. The positive effects of rehabilitation persisted longer, when selenium status did not decrease after rehabilitation.

Amidst the transformative backdrop of the post-Covid-19 context, the researcher embarks on a qualitative exploratory study to investigate the intricate interplay of religiosity, educational engagement, and campus life among college students at St. Michael's College, Iligan City. Guided by a theoretical framework integrating Vygotsky's sociocultural theory, Fredricks et al.'s engagement theory, and Pascarella & Terenzini's educational impact theory, this study delves into the dynamic fruition of religiosity in response to the pandemic's impact. Employing purposeful and maximum variation sampling, the investigation unravels narratives from interviews, focus group discussions, and observations. Through thematic analysis, themes of "Adaptive Integration," "Religious Resilience," "Community Nexus," "Challenges of Synchronization," and "Identity Negotiation" emerge. In the discourse of these themes, strategies students employ to navigate challenges arising from this confluence are unearthed. Rooted in a deep understanding of the context, this study presents implications for fostering holistic growth within an inclusive educational environment. As the findings and insights are presented, stakeholders are invited to reimagine the role of religiosity, educational engagement, and campus life in shaping the holistic student experience in a world forever changed.

Background: Reminiscence studies and life reviews have a number of proven advantages. Future generations gain by learning from elders' life experiences, as do older adults themselves who share their memories. Despite Oman's sizable geriatric population, research on older individuals' life experiences is scarce. Therefore, this study aims to explore the life experiences of older Omani individuals across their many life stages, from childhood to the present. Methods: This was a qualitative study design. A total of 13 Omani older adults (9 females and 4 males) with an average age of 68 years were recruited for this study. Socio-demographic and life review information was gathered according to a set of semi-structured guiding questions. The responses were then captured on audio recordings, which underwent transcription and translation. Thematic analysis techniques were applied to the extracted data. Results: Three main themes were evident in the study’s findings: Childhood memories, Friendships, and Relationships, as well as the elders’ past. Additionally, older adults passed on a number of gems of wisdom to be shared with the younger generations. Conclusion: This study aided in revealing the resiliency, social connections, and life reflections of Omani older adults. Based on these findings, future studies might explore particular aspects of older experiences and pinpoint solutions to improve their quality of life and well-being.

This paper presents a theoretical evaluation of the prices of mixed briquettes produced from co-conut shells (CCS), banana peels (BNP), rattan waste (RWT), and sugarcane bagasse (SGC), and, on the other hand, an analysis of the economic viability of their use as a replacement for conventional household fuels (Liquefied Petroleum Gas, fuelwood, and wood charcoal) in house-holds in Cameroon. The investigation was carried out using the Life Cycle Cost method on a typical household over a ten-year period with annual cooking energy requirements of 950 kWhth. The SGC-CCS and SGC-RWT mixed briquettes with a ratio higher than 7.75% and 11.1%, respectively, have prices lower than 0.063 €/kWhth. The Present Value of the Net Benefit is posi-tive for the use of SGC-CCS and SGC-RWT mixed briquettes. The results show that by making the right mixes of residues, it is possible to obtain biomass briquettes that are less expensive than conventional fuels.

Background: Carers (or care partners) of adults in LTC contribute substantially to the health and well-being of their loved ones by providing physical care, emotional support, and companionship. Despite their critical role, little is known about how caregivers have been impacted by the pandemic. The purpose of this study was to explore the lived experiences of caregivers of people living in long-term care (LTC) homes during the initial phases of the COVID-19 pandemic and potential supports and resources needed to improve caregivers’ quality of life.Design: An interpretive descriptive approach that incorporated photovoice method was used. Methods: Using purposive sampling strategy, six family carers in Ontario, Canada were recruited between September and December 2021. Over a four-week period, caregivers took pictures depicting their experience of the pandemic that were shared in a virtual focus group. Visual and text data were analyzed using thematic analysis with an inductive approach.Findings: Caregivers expressed feelings of frustration, confusion, and joy. Emerging themes included: (i) feeling like a “criminal” amidst visitor restrictions and rules; (ii) experiencing uncertainty and disappointment in the quality of care of long-term care homes; (iii) going through burnout; and (iv) focusing on small joys and cherished memories.Conclusions: The combination of visual and textual methods provided unique insight into the mental distress, isolation, and intense emotional burdens experienced by caregivers during the pandemic. Impact: Our findings underscore the need for LTC organizations to work in unison with caregivers to optimize the care of residents and support mental health of caregivers.

The right to live with dignity during the final stages of existence, enshrined in national and supranational Charters of Rights, represents a significant step towards humanizing medicine and is integral to the right to health. Palliative Care, rooted in health, dignity, and therapeutic self-determination, has emerged as a fundamental human right and a moral imperative within health systems. It seeks to alleviate suffering, emphasizing the holistic well-being of patients with life-limiting illnesses. This paper provides a comprehensive global perspective on Palliative Care, with special attention to its implementation in Italy. Palliative Care is a crucial dimension of care, designed to enhance the quality of life for patients suffering from progressive and incurable diseases. Despite its growing need due to an aging population and increased prevalence of chronic illnesses, still remains a significant disparity in access to these essential services worldwide. Insufficient resources, legislative constraints, and limited training for healthcare providers pose challenges to the widespread adoption of Palliative Care. In Italy, although laws have been enacted to ensure the provision of Palliative Care, its availability remains inconsistent across different regions. Financial constraints and insufficient support hinder the comprehensive dissemination of these services. Recognizing the significance of Palliative Care, the Catholic Church also endorses its implementation as a response to human suffering and an approach to end-of-life care. Efforts to strengthen Palliative Care are critical to meeting the rising demand and ensuring access to compassionate and dignified care for all individuals in need. Through legislative advancements and adequate resources, Italy can make significant strides in advancing the provision of Palliative Care.

In order to assess the degradation state of rolling bearings and accurately grasp the remaining life information of rolling bearings, a bearing remaining life prediction method based on the grey wolf optimization algorithm to improve the BP neural network model is proposed. The method consists of two steps, firstly, using the craggy value and root mean square value to determine the first failure time of rolling bearings so as to approximate the input features, and secondly, using the Grey Wolf optimization algorithm to optimize the BP neural network to construct the degradation model of the bearings through machine learning. The method reduces the prediction error compared with conventional techniques, indicating that the method can effectively simulate the bearing degradation process and predict the remaining useful life (RUL) of the bearing.

Abstract Introduction. Burnout syndrome develops as a consequence of chronic stress among employees. The study objectives were to examine burnout syndrome and to evaluate the quality of life among security employees of the professional private security sector in Central Serbia. Methods. A multicenter cross-sectional questionnaire-based study was performed. The questionnaire for staff employed at institutions who are in direct contact with people (Human Services Survey, MBI-HSS) and Short Form 36 Health Survey-(SF-36). Results. A total of 353 respondents participated in the study. The response rate was 80%. Approximately one-third (32.6%) had symptoms of total burnout, and a much higher number of responders had a moderate or high level of burnout on individual subscales:- depersonalization (high 82.4%, moderate 16.2%) and emotional exhaustion (high 66.3%, moderate 19.8%) and, slightly more than one-third (34.5%) had low personal achievement, while about one-third (32.9%) had moderate personal achievement. Female sex and older age were associated with a higher risk of total burnout and the development of emotional exhaustion. Male sex, higher education, and managerial position were associated with higher personal achievement and lower risk of total burnout. Male sex, marital union, two or more children, and direct contact with clients were significantly associated with a lower quality of life of employees. Conclusion. Female sex and older age were associated with a higher risk of total burnout and the development of emotional exhaustion. Male sex, university education and managerial position were associated with greater personal achievement and were protective factors in relation to the development of burnout. Male sex, marital union, two or more children, and direct contact with clients were significantly associated with lower quality of life of employees. Keywords: burnout syndrome; security employees; professional private sector; quality of life

Fatigue failure remains a critical concern in structural engineering and material science, prompting extensive research to understand and predict the behaviour of materials under cyclic loading conditions. The present study aims to investigate the fatigue life of carbon steel specimens containing opposite semicircular edge notches through a comprehensive experimental and numerical analysis. In this study, stress concentration factors (SCF, K_t) of rectangular plate with opposite semicircular notches are considered under uniform tensile stress to analyse the notch deformation because of stretching of plate. Furthermore, the research focuses on quantifying stress concentration factors (SCFs) for these notches based on S-N curves of carbon steel. The study employs a combination of experimental and numerical techniques to understand the influence of these notches on the fatigue performance of carbon steel structures. A plate with opposite semicircular edge single notches under the axial load creates stress concentration near the notch and it is much larger than the average stress on the plate. Both analytical and finite element methods are used to calculate the maximum stress around the notch. SOLIDWORKS Premium Student Edition 2023 has been employed for modelling and SOLIDWORKS Simulation Premium Student Edition 2023 has been used for stress analysis and fatigue notch factor of rectangular plate of size 31 mm x 25.4 mm x 6.35 mm. The uniform tensile load with a magnitude of 20195 N is applied on one sides of rectangular plate normal to the sides of notches with ratio h/r = 1, for the semicircular notch. The result obtained on both analytical and finite element methods are compared and the percentage of error has been evaluated. Subsequently, these specimens undergo fatigue testing under varying loading conditions to capture their fatigue behaviour. The acquired fatigue data is then plotted against stress amplitude to construct S-N curves, forming the foundation for assessing the fatigue life of the notched specimens. To complement the experimental findings and to gain a deeper understanding of the stress concentration phenomenon, numerical simulations are conducted using advanced finite element analysis (FEA) techniques. The finite element models are carefully calibrated against the experimental results to ensure their accuracy and reliability. The FEA simulations enable the determination of stress concentration factors at critical locations within the notched specimens, further validating the experimental observations. The investigation reveals crucial insights into the effect of opposite semicircular edge notches on the fatigue life of carbon steel structures. The obtained S-N curves allow engineers and designers to predict the fatigue life of components with similar notches, aiding in the development of reliable and durable structures in practical applications. Moreover, the stress concentration factors determined from the numerical simulations provide valuable data to assess the potential failure modes and to optimise designs, effectively mitigating fatigue-related failures. The combination of experimental and numerical approaches ensures a comprehensive and rigorous analysis of the fatigue behaviour in notched specimens, offering a reliable basis for making informed engineering decisions. The comparison between the analytical method and the Finite Element Method (FEM) demonstrated good agreement, with an error percentage of 4.272%. The analysis revealed that the specimen would experience failure after approximately 2882 cycles, with a maximum stress of 395.914 MPa. This research study enhances the understanding of fatigue life in carbon steel structures containing opposite semicircular edge notches and contributes valuable data to the field of fatigue mechanics. The outcomes serve as a valuable resource for professionals engaged in structural engineering, material science, and design optimisation, ultimately leading to safer and more durable industrial components in critical applications. The findings of this research contribute to the understanding of fatigue behaviour in carbon steel components with stress concentration effects caused by semicircular notches. Moreover, the validated numerical simulations and data curves facilitate the prediction of fatigue life and aid in determining the critical conditions leading to fatigue failure. In conclusion, this research highlights the significance of combining experimental testing with numerical simulations to comprehensively analyse the fatigue life of carbon steel specimens with opposite semicircular edge notches. The obtained stress concentration factors provide crucial information for structural integrity assessment and offer potential for further optimising design criteria to mitigate fatigue-related failures. The findings of this study could play a vital role in enhancing the reliability and safety of carbon steel structures subjected to cyclic loading conditions. The comprehensive experimental and numerical analyses establish a foundation for future studies exploring other materials and geometries with notches, fostering advancements in fatigue life prediction and structural integrity assessment.

In order to cope with the challenges of physical and psychological aging in the indigenous people in Taiwan, most of the tribes in Taiwan set up cultural health stations for indigenous elderly. These community care facilities have practiced many health promotion activities, such as the reminiscence, life review, and arts activity. However, there was little exploration into the benefit of indigenous people’s practice the life review activity in Taiwan—the gap this study aimed to fill. This study adopts life review therapy through a set of innovative life review activity designs in indigenous older adults, including activity planning, and indigenous cultural elements. A qualitative study design using semi-structured interviews was used to obtain data from a purposive sample. Ten participants who assessed to the cultural health stations services and participated in the life review activities of the indigenous older adults in southern Taiwan were interviewed individually. The data were analyzed using Graneheim and Lundman’s qualitative content analysis. The theme—“experiences and benefits of participating”—and two categories with six subcategories emerged. The results demonstrated that the participation of the indigenous elderly in life review activities with cultural elements had obvious benefits for their mental health. Life review therapy can be incorporated as a supplementary LTC treatment for the indigenous people, thereby, promoting the positive emotions of the indigenous elderly.

Background: allergic diseases and, in particular food allergy (FA), have been identified as one of the major diseases in the world. The first 1000 days of life can be a “window of opportunity” or a “window of susceptibility” during which several factors can predispose children to FA development. Changes in gut microbiota composition, from pregnancy to infancy, could have a pivotal role in this regard: some bacterial genus such as Lactobacillus or Bifidobacterium seem to be protective from FA development, on the contrary Clostridium and Staphylococcus appear to be unprotective. Methods: we conducted a research through the most recent literature (2013-2023), using Pubmed and Scopus as databases. We included English original papers, clinical trials, metanalysis and reviews. Case reports, series and letters have been excluded. Results: during pregnancy, maternal diet can play a fundamental role in influencing gut microbiota composition of newborns. After birth, human milk can promote the development of protective microbial species by human milk oligosaccharides (HMOs), that play a prebiotic role. Also complementary feeding can modify gut microbiota composition. Conclusions: the first two years of life are a critical period where several factors, in genetic predisposed children, can increase the risk of FA development.

Abstract: The migration and transformation of pesticides in the environment will have an impact on the ecosystem. This study collected greenhouse soil from Shouguang, Shandong Province, and studied the photodegradation and leaching of 17 common pesticides in the soil. The results of photodegradation experiments showed that the degradation rate of certain pesticides was increased in the light environment, compared with that in the dark controls. The light half-lives of emamectin benzoate, pyraclostrobin, and metalaxyl were all shorter than their respective dark half-lives, indicating that their residues in soil were greatly affected by light. The leaching experiment showed that the leaching potential of the leachable pesticides was: nitenpyram ≫ metalaxyl &gt; acetamiprid &gt; carbendazim &gt; diethofencarb ≈ chlorantraniliprole &gt; isoprothiolane &gt; oxadixyl &gt; boscalid ≈ tebuconazole &gt; hexaconazole. Pesticides that are easy to leach but not easy to degrade, such as chlorantraniliprole and metalaxyl, have a high potential risk of groundwater pollution, and more degradation technologies should be used to reduce their pollution risk. The study on photodegradation and vertical migration behavior of various pesticides in this study was conducive to providing references for the agricultural use and pollution control of pesticides.