A spinning gyroscope precesses about the vertical due to a torque acting upon the wheel. The torque is generated by the shift of moment of force by gravity and it points to the vertical instead of the tangential direction of precession. This intuition offers an alternative and straightforward view of precession dynamics in comparison with the literature. It also presumes a dynamic balance of momentum between circular motions of the wheel spin and precession. Accordingly, the gyroscopic dynamics is then applied to the study of galactic motion of the solar system in space and the Galactic mass is calculated with the inclusion of gyroscopic effect of the solar planets. Results indicate that the gyroscopic effect of Mercury orbiting around the Sun can increase the calculated Galactic mass by 23% in comparison with the result obtained by the classic approach.

The present article is dealing with the state of question about building-energy monitoring systems used for data collection to estimate the Heat Lost Coefficient (HLC) with existing methods and so determinate buildings’ Envelope Energy Performance (EEP). In addition, the data requirements of HLC estimation methods are related with commonly used methods for fault detection, calibration and supervision of energy monitoring systems in buildings. Based on an extended review of experimental tests since 1978, a qualitative and quantitative analysis of Monitoring and Controlling System (MCS) specifications has been carried out. Although most actual Buildings Automation Systems (BAS) may measure the required parameters, further research is still needed to ensure that these data are accurate enough to rigorously apply the HLC estimation methods.

Estimation of core and surface temperature is one of the crucial functionalities of the lithium-ion Battery Management System (BMS) towards providing effective thermal management, fault detection and operational safety. While, it is impractical to measure core temperature using physical sensors, implementing a complex estimation strategy in on-board low-cost BMS is challenging due to high computational cost and the cost of implementation. Typically, a temperature estimation scheme consists of a heat generation model and a heat transfer model. Several researchers have already proposed ranges of thermal models having different levels of accuracy and complexity. Broadly, there are first-order and second-order heat capacitor-resistor-based thermal models of lithium-ion batteries (LIBs) for core and surface temperature estimation. This paper deals with a detailed comparative study between these two models using extensive laboratory test data and simulation study to access suitability in online prediction and onboard BMS. The aim is to guide whether it’s worth investing towards developing a second-order model instead of a first-order model with respect to prediction accuracy considering modelling complexity, experiments required and the computational cost. Both the thermal models along with the parameter estimation scheme are modelled and simulated using MATLAB/Simulink environment. Models are validated using laboratory test data of a cylindrical 18650 LIB cell. Further, a Kalman Filter with appropriate process and measurement noise levels are used to estimate the core temperature in terms of measured surface and ambient temperatures. Results from the first-order model and second-order models are analyzed for comparison purposes.

Dietary factors are one of the risk factors that can impact the brain chemistry, which leads to mental distress. Based on our data mining approach, we found that mental distress in men is associated with eating unhealthy food. Our aim in this paper is to apply results from our big data analytics approach to inform system dynamics (SD) modeling to investigate the causal relationships between brain structures, nutrients from food and dietary supplements, and mental health. We perform descriptive analysis based on a large data set to estimate the SD modeling parameters. Finally, we calibrate the model towards a time series data collected for individuals on their dietary and distress patterns. The results reveal that bridging these different methodologies leads to further insights from the SD model and decreases the error of calibrated parameter values. Future research is needed to validate our initial results for investigating the relationship between mental distress and dietary intake.

This study identifies the optimal management policy of a given energy storage system (ESS) installed in a grid-connected wind farm for maximizing the monetary benefits and provides guidelines for defining the economic value of the ESS under the optimal management policy and selecting the optimal size of the ESS based on the economic value. Considering stochastic models for wind power and electricity price, we develop a finite-horizon periodic-review Markov decision process (MDP) model to seek the optimal management policy. We also use a simple optimization model to find the optimal storage capacity and charging/discharging capacity of the ESS. By applying our analytic approach to a real-world grid-connected wind farm located in South Korea, we verify the usefulness of this study. Our numerical study shows that the economic value of the ESS is highly dependent on the management policy, wind electricity variability, and the electricity price variability. Thus, the optimal size of ESS should be carefully determined based on the locational characteristics and management policy even with limited investments. Furthermore, this study provides a meaningful policy implication on how much a subsidy the government should provide for installing ESS in a wind farm.

Farmers’ conventional tillage (CT) and residue removal practices in rice-maize systems in South Asia’s Eastern Gangetic Plain (EGP) are input-intensive, costly and soil degradative. We conducted a rice-maize-mungbean (R-M-MB) system experiment with six tillage and three residue management treatments in Bangladesh representing the EGP. Maize yields were significantly (p≤0.05) higher under permanent (PB) or fresh (FB) beds and strip tillage (ST) than CT but no differences in mungbean yields. Rice yields under PB, FB and CT were similar, but significantly higher than under zero or minimum tillage and ST. Yields of all crops increased significantly (p≤0.05) with residue retention compared to no retention. Total system productivity was highest under PB followed by FB and ST. Compared with CT, gross margins in PB, FB and ST increased by 18, 13 and 11%, and soil organic matter (SOM) and total N contents across tillage treatments increased by 11-16% and 12-24%, respectively. After three years, SOM and total N and available P and S contents increased significantly (p≤0.05) by residue retention. Results demonstrate the potential of PB, FB and ST with residue retention, for improving the productivity, profitability and soil health under R-M-MB systems in Bangladesh and similar soils in the EGP.

Bacterial pathogens have been attributed to poultry housing structure, financial strength, and incessant use of antibiotics, variable seasons and management systems practiced. Variant forms of bacterial pathogens can be detected by recognizing the molecular pattern of the pathogens through an innate immune mechanism such as mannose-binding lectin. Mannose-binding lectin (MBL) possesses an innate pattern recognition molecule that easily sequestered to region of infections and inflammations. This works by attaching itself to antigen surface thus hinders proliferation and disease activity in the host organism. Baker’s method, nephelometric assays technique, Enzyme-Linked Immunosurbent Assay technique, Polymerase Chain Reaction, Deoxyribonucleic Acid typing and other biotechnology related methods are techniques used in detecting and quantifying MBL. Mannose-binding lectin levels in serum can be influenced by age, management systems, feed formulation strategies and seasons. Therefore, knowledge of MBL should be encouraged in all aspect of poultry production, in order to discourage incessant use of drugs at a slight exposure to prevailing bacterial which can help in maximizing cost.

In this research paper we describe the development phase of a low-cost LoRa IoT solution applied to a kindergarten school with three years results. A set of sensors solution was developed in a LoRa communication board, battery powered, providing a simplified setup process. These sensors were used in order to measure temperature, humidity, luminosity, air quality and presence. Also, energy monitor solutions were integrated. The acquired data is transmitted and analysed for knowledge extraction, identifying savings and other related KPIs. From data, automatic saving actions were performed towards heating and cooling systems, lighting and a set of if-then actions were developed for automatic cost-saving actions, based on infrared signals to heating/cooling systems using some procedure of external command devices. This approach avoids the usage of proprietary vendor solutions in a flexible approach that can easily be deployed to any building facility. This is an important achievement since most of the building consumption is based on heating and cooling systems. In a three years test of the solution, the total energy consumption savings surpassed 20%

The Arctic freshwater budget is critical for understanding the climate in the northern regions. However, the hydrology of the Arctic circumpolar tundra region (ACTR) and the largest pan-Arctic rivers are still not well understood. In the present paper, we analyze the spatiotemporal variations in terrestrial water storage (TWS) of the ACTR, including three of its largest pan-Arctic river basins (Lena, Mackenzie, Yukon), using monthly Gravity Recovery and Climate Experiment (GRACE) data from 2002 to 2016. Together with global land reanalysis, river runoff, and inundation extent area (IEA) data, we identify declining TWS trends throughout the ACTR that we attribute largely to increasing evapotranspiration driven by increasing summer air temperatures. In terms of regional changes, large and significant negative trends in TWS are observed mainly over the North American continent. At basin scale, we show that, in the Lena River basin, the autumnal TWS signal persists until the winter of the following year, while in the Mackenzie River basin, the TWS levels in the autumn and winter has no significant impact on the following year. As global warming is expected to be particularly significant in the northern regions, our results are important for understanding future TWS trends, with possible further decline.

The sustainable development of our world has gain particular attention of a wide range of decisional factors, civil society, business sector, and scientific community, seeing that the prosperity of people and society is possible with the aid of sustained and inclusive economic growth of all countries and regions. Educational environment has a decisive impact on changes in the way that societies are coping with national, regional, and global challenges and opportunities brought by sustainable development. Looking at the implications of HE on the progress of society, the paper addressed the lack of HE institutional capacity to integrate the principles and practices of sustainable development into all aspects of education and learning. The scope of research problem was bounded on the capability of HEI as organization and school to act as entrepreneurial university by combining the scope of its responsibility within the value chain through a practical and effective mechanism needed to align the strategy with sustainable development goals (SDGs). Embarking on the path of SDGs requires HEI to design, launch, implement, and customize specific processes architectures to govern the advance of sustainability approach. The authors applied the process scoping diagram to capture and conceptualize the educational model needed to guide the HEI through the process of change to embrace sustainability into organizational culture and daily operations. It has been used the SIPOC method (Supplier, Input, Process, Output, Customer) with Visio software tool to articulate processes relationships embedded in the educational model of HEI. The benefits relied on the organized view of the work processes needed to be performed to incorporate SDGs into the strategy of any entrepreneurial HEI. Finally, the authors shared their views on the scalability of the model which may be customized and harmonized in accordance with different HE circumstances and priorities. Implementing the proposed educational model requires long-term institutional commitment, transparency, continuous performance improvement, and communicating the strategy for SDGs and its achievements to wider stakeholders.

The onset of coronavirus disease 2019 (COVID-19), an infectious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has sparked unprecedented change. Due to the public health guidelines imposed during the COVID-19 pandemic, there is no longer sufficient street traffic for remaining buskers to generate sufficient revenue, leading a majority of street musicians to pursue remote music production. However, real-time music production is notoriously difficult due to the excessively high latencies that current video call platforms such as Zoom and Google Meet harbor. In this paper, we propose an architecture for a platform with end-to-end, near-lossless audio transmission tailored specifically to online joint music production, called Latent Space. We discuss the usage of a recurrent autoencoder with sequence-aware encoding (RAES) and a 1D convolutional layer for audio compression, which we dub ClefNet, as well as propose a new evaluation metric for naive autoencoders (AEs), MSE-DTW loss, which combines the traditional mean square error (MSE) loss function with dynamic time warping (DTW) to prevent an increase in loss when the target sequence predicted by the AE is strictly a temporal variation of the source sequence. Moreover, we detail the logistics of a live system implementation which uses the Web Audio API to extract raw audio samples in real-time to feed into our client-side model before relaying the traffic using peer-to-peer WebRTC technology. The Latent Space platform can be accessed at https://latent-space.tech, and the code and data can be found under the MIT License at https://github.com/rvignav/ClefNet.

The purpose of this paper is to describe a new way of producing renewable energy based on fjords as a water heater. We will call this system the Water-thermal Energy Production System (WEPS), because the basic idea is to extract heating and cooling energy from water. Although a prototype of WEPS has existed in Norway for more than ten years, a WEPS currently in operation has not been financially analyzed in the literature. Coastal parts of Norway have a potential of 5 TWh of profitable WEPS-facilities [9], due to convenient access to fjords containing water with stable all-season temperatures of about 4–12C when the depth of the water is about 50 meters. This stability of the water temperature makes it possible to extract energy from the fjord in a very efficient way. The potential for economically-profitable WEPS in other parts of the world has not been estimated. In order to answer such a question, more research is required. We have conducted a case study of a WEPS located in the Norwegian municipality of Eid. This is the first full-scale Norwegian WEPS, and it has been operating since 2006. The nascent years have passed, and the technology has been in operation for some years. In this paper, we have made an estimate of the business profitability and the external effects based on past empirical evidence and some assumptions about future development in some key figures. The results suggests that WEPS-Eid has been a profitable investment carrying a positive internal rate of revenue, even if the present underutilization in production capacity will continue in the future. Stability in energy prices for heating purposes has also gained customers compared to the more volatile prices of alternative renewable energy, like hydropower or wind turbines. The negative, external effects in the operating phase from WEPS-Eid are insignificant. Despite the significant profitability of the WEPS facility in Eid, there are two main obstacles for new entrants. There is a lack of relevant operational information for potential investors due to few facilities. This leads to uncertainty, and investments in WEPS appear as a risky business. Secondly, construction of a WEPS requires both big financial investments in digging and facilitating long trenches for a pipeline system and time and effort spent on acquiring the licenses needed for doing this work. A coordinating unit is probably required in order to get the necessary public and private licenses and to reduce fixed costs by coordinating other tasks in the same trenches, like pipes for water and sewer, fiber cables and tele-cables. In Eid, the local municipal administration was the coordinating unit.

Climate change and global warming are becoming important problems around the globe. To prevent these environmental problems, many countries try to reduce the emissions of greenhouse gases (GHG) and manage the consumption of energy. In Korea, Korea Electric Power Corporation (KEPCO) has introduced Smart Grid (SG) technologies to its branch office in 2014. This was the first demonstration of smart grid on a building called Smart Grid Station. This paper treats the achievements of the Smart Grid Station (SGS) by its early target in three aspects. The things are peak reduction, power consumption reduction and electricity fee saving. The authors analyzed the achievements by comparing the data of 2015 with the data of 2014. Through the evaluation, the authors studied the case, proved the advantages of SGS, and suggested the requirements to improve and the direction to go of the system.

Decision tables have been used for many years in data processing and business applications to simulate complex rule sets. Several computer languages have been developed based on rule systems and they are easily programmed in several current languages. Land management and river-reservoir models simulate complex land management operations and reservoir management in highly regulated river systems. Decision tables are a precise yet compact way to model the rule sets and corresponding actions found in these models. In this study, we discuss the suitability of decision tables to simulate management in the river basin scale Soil and Water Assessment Tool (SWAT+) model. Decision tables are developed to simulate automated irrigation and reservoir releases. A simple auto irrigation application of decision tables was developed using plant water stress as a condition for irrigating corn in Texas. Sensitivity of the water stress trigger and irrigation application amounts were shown on soil moisture and corn yields. In addition, the Grapevine Reservoir near Dallas, Texas was used to illustrate the use of decision tables to simulate reservoir releases. The releases were conditioned on reservoir volumes and flood season. The release rules as implemented by the decision table realistically simulated flood releases as evidenced by a daily NSE (Nash-Sutcliffe Efficiency) of 0.52 and a percent bias of -1.1%. Using decision tables to simulate management in land, river and reservoir models was shown to have several advantages over current approaches including: 1) mature technology with considerable literature and applications, 2) ability to accurately represent complex, real world decision making, 3) code that is efficient, modular and easy to maintain, and 4) tables that are easy to maintain, support, and modify.

This study describes the design and implementation of an electronic nose, which was applied to classify and identify hazardous gases generated in underground coal mines. For this purpose, an electrochemical sensor array was used to detect a set of toxic gases. This work illustrates the electronic components of a wireless multisensory system for the toxic gases detection on indoor environments (i.e., underground mines), which was performed with reduced size, low cost and low electrical consumption, in order to detect different compounds using the basic principle of operation of each component to be applied to the target gas. Furthermore, the sample collection, data communication and data processing in real time obtained an excellent performance for gas sensing and even to measure the concentration level of the chemical volatile compounds transmitted from different points of the detection zone. The results demonstrated that using a wireless electronic nose for toxic gases detection was possible to reach a success rate of discrimination of 97%, using principal components analysis (PCA) and Linear Discriminant Analysis (LDA).

The environmental issues we are currently facing require long-term prospective efforts for sustainable growth. Renewable energy sources seem to be one of the most practical and efficient alternatives in this regard. Understanding a nation's pattern of energy use and renewable energy production is crucial for developing strategic plans. No previous study has been performed to explore the dynamics of power consumption with the change in renewable energy production on a country-wide scale. In contrast, a number of deep learning algorithms demonstrated acceptable performance while handling sequential data in the era of data-driven predictions. In this study, we developed a scheme to investigate and predict total power consumption and renewable energy production time series for eleven years of data using a Recurrent Neural Network (RNN). The dynamics of the interaction between the total annual power consumption and renewable energy production are investigated through extensive Exploratory Data Analysis (EDA) and a feature engineering framework. The performance of the model is found satisfactory through the comparison of the predicted data with the observed data, visualization of the distribution of the errors and Root Mean Squared Error (RMSE) value of 0.084. Higher performance is achieved through the increase in the number of epochs and hyperparameter tuning. The proposed framework can be used and transferred to investigate the trend of renewable energy production and power consumption and predict the future scenarios for different communities. Incorporation of the cloud-based platform into the proposed pipeline may lead to real-time forecasting.

The requirements for using noncyanide imitation gold plating as decorative electroplating are increasing; thus, continuously improving the quality of the coating of the imitation gold plating and optimizing the coating process have become the current priority. In this work, hydroxyethylidene diphosphonic acid (HEDP) was used as the main complexing agent, CuSO4·5H2O, ZnSO4·7H2O and NaSnO3·3H2O were the main salts, and NaOH and anhydrous sodium carbonate were used as the buffers to prepare the electroplating solution. Using sodium citrate (SC), sodium potassium tartrate (SS), sodium gluconate (SG), and glycerol (Gl) as four additives, the effects of the number of carboxyl groups on the properties of a Cu-Zn-Sn alloy coating were compared. The electrochemical analysis showed that Cu-Zn-Sn alloy codeposition occurred at -0.50 V vs. Hg|HgO. The scanning electron microscopy (SEM) results showed that the particle size of the coatings obtained with carboxyl-containing additives was more uniform than that obtained with the electroplating solution without additives. The X-ray fluorescence spectrometry (XRF) analysis revealed that the composition of the Cu-Zn-Sn alloy coating obtained by using SC as an additive in the electroplating solution was 89.75 wt% Cu, 9.61 wt% Zn, and 0.64 wt% Sn, and the color of the coating was golden yellow. The X-ray diffraction (XRD) pattern showed that the coating was a mixture of Cu, Cu5Zn8, CuSn, Cu6Sn5, and CuZn phases. The analysis of the electroplating solution by UV, IR and NMR spectroscopy methods indicates that the additives improve the coating by affecting the complexation reaction of metal ions. These results can provide technical and theoretical guidance for developing Cu-Zn-Sn ternary alloy electrodeposition technology with the new cyanide-free HEDP alkaline electroplating system.

Animal-focused research has been crucial for scientific advancement however, in this matter, rodents are still taking a starring role. Coming out from merely being supportive of evidence found in rodents, the use of fish models has slowly taken a more central role and expanded its overall contributions in areas such as social sciences, evolution, physiology, and recently in translational medical research. In neurosciences, zebrafish has been widely adopted, contributing to our understanding of the genetic control of brain processes, and the effects of pharmacological manipulations. However, discussion continues regarding the paradox of function versus structure, when fish and mammals are compared, and on the potentially evolutionarily conserved nature of behaviour across fish species. From the behavioural stand point we explored aversive/stress and social behaviour in selected fish models, and refer to the extensive contributions of stress and monoaminergic systems. We suggest that, in spite of marked neuroanatomical differences between fish and mammals, stress and sociality are conserved at the behavioural and molecular levels. We also suggest that stress and sociality are mediated by monoamines in predictable and non-trivial ways, and that monoamines could “bridge” the relationship between stress and social behaviour. To reconcile the level of divergence with the level of similarity, we need neuroanatomical, pharmacological, behavioural, and ecological studies conducted in the laboratory and in nature. These areas need to add to each other to enhance our understanding of fish behaviour and ultimately how this all may translate to better model systems for translational studies.

Currently, energy security and environmental degradation are the two biggest challenges before humanity that can be surmounted with the use of green and sustainable biofuels produced from lignocellulosic crops. In the future, to ensure adequate and cost-effective supply of biofuels, it requires a sufficient amount of amenable and quality lignocellulosic feedstocks. Therefore, agricultural yields of lignocellulosic biomass crops should be substantially increased by intense genetic maneuvering of key gene regulatory mechanisms and signaling pathways that control plant biomass yield. Recently, numerous miRNAs families are identified, characterized, and validated across the plant kingdom. Plant microRNAs (miRNAs) are 21 to 24 nucleotides long, non-coding small RNAs, act as regulators of their target genes via inducing modifications in transcription, translation, and epigenome. MiRNAs represent many hallmark characteristics like sequence-specific regulation, tissue, and species-specific expression, evolutionary conservation, and functional diversity. They coordinate well physiological and life cycle processes in plants under adverse environmental conditions. Hence, miRNAs offer accurate, precise, and efficient regulatory switches in the miRNA-targeted genetic networks. It is evident from the study of the miR156 family and its target SQUAMOSA PROMOTER BINDING PROTEIN-LIKE (SPL) genes network that controls highly significant agronomic traits in crop plants. The miR156/SPL module acts as a master circuit that synchronizes many intricate complex biological functions such as growth and development, and metabolic processes by sensing internal and external environmental signals in plants. Therefore, miR156 can prove a potential target for miRNAs based plant biotechnology to harmonize complex biofuel traits and improve biomass yield in lignocellulosic biomass crops.

Reinforcement learning is used for air combat problems in recent years, and the idea of curriculum learning is often used for reinforcement learning, but traditional curriculum learning suffers from the problem of plasticity loss in neural networks. Plasticity loss is the difficulty of learning new knowledge after the network has converged. To this end, we propose a motivational curriculum learning distributed proximal policy optimization (MCLDPPO) algorithm, through which agents trained can significantly outperform the predictive game tree and mainstream reinforcement learning methods. The motivational curriculum learning is to help the agent gradually improve their combat ability by observing the agent's unsatisfactory performance and providing corresponding rewards as a guide. Additionally, a complete tactical maneuver is encapsulated based on existing air combat knowledge, and through the flexible use of these maneuvers, some tactics beyond human knowledge can be realized. In addition, we designed an interruption mechanism for the agent to increase the frequency of decision-making when the agent faces an emergency. When the number of threats the agent receives changes, the current action will be interrupted to reacquire observations and make decisions again. Using the interruption mechanism can significantly improve the ability of the agent. To simulate actual air combat better, we built an air combat environment based on digital twin technology to create an air combat engine core such as missiles and radars. Based on this environment, we develop a distributed intelligent training system that employs Redis as the cache and obtains the data generated in the distributed environment through a multi-threaded TCP/IP protocol, which significantly increases the training data throughput and helps the agent accelerates convergence. The experimental results demonstrate that the agent can fully exploit the situational information to make reasonable decisions and affords air combat tactical adaption, verifying the effectiveness of the algorithmic framework proposed in this paper.

Based on the fractional order of nonlinear system for love model with a periodic function as an external force, analyzed the characteristics of the chaotic dynamic in this study. The relationship between the chaotic dynamic of the fractional-love model with the external force and the fractional-order system was analyzed when the parameters are fixed. Further, we also studied the relationship between the chaotic systemic dynamic and the parameters when the fractional-order system is fixed. The results show that when the parameters are fixed, the fractional-order system exhibited segmented chaotic states for the different fractional orders of the system. When fixed the fractional-order system, the system exhibited the periodic and chaotic states as parameter changes.

Uniform illumination is a key requirement in different research fields. However, this requirement is often difficult to achieve when high intensity is required at the same time. Recent advancements in LED lamps allow nowadays for compact and economical solutions. In this work we present a suitable solution for various laboratory purposes requiring stable, uniform and high intensity illumination. The system is composed of four identical high power white LED arrays of 30 mm diameter each, placed on a supporting and cooling structure having a minimum volume of 26 cm x 26 cm x 8 cm. A numerical model has been developed, based on a ray tracing software, in order to simulate the performances. These have then been experimentally validated with measurements of the power density map, carried out with a 1% uncertainty pyranometer. Data show that the built system is very stable over time and provides an illumination uniformity higher than 98%, on a surface of 50 mm radius, which reduces to 95% on a surface of 75 mm radius. The power density can be adjusted in the 390-1360 W m-2 range, not affecting uniformity.

Recommender systems have been applied in a wide range of domains such as e-commerce, media, banking, and utilities. This kind of system provides personalized suggestions based on large amounts of data in order to increase user satisfaction. These suggestions help client select products, while organizations can increase the consumption of a product. In the case of social data, sentiment analysis can help gain better understanding of a user’s attitudes, opinions and emotions, which is beneficial to integrate in recommender systems for achieving higher recommendation reliability. On the one hand, this information can be used to complement explicit ratings given to products by users. On the other hand, sentiment analysis of items that can be derived from online news services, blogs, social media or even from the recommender systems themselves is seen as capable of providing better recommendations to users. In this study, we present and evaluate a recommendation approach that integrates sentiment analysis into collaborative filtering methods. The recommender system proposal is based on an adaptive architecture, which includes improved techniques for feature extraction and deep learning models based on sentiment analysis. The results of the empirical study performed with two popular datasets show that sentiment–based deep learning models and collaborative filtering methods can significantly improve the recommender system’s performance.

The United Arab Emirates (UAE) is significantly dependent on desalinated water and groundwater resource, which is expensive and highly energy intensive. Despite the scarce water resource, only 54% of the recycled water was reused in 2015. In this study, an “Oasis” complex comprised of Sustainable Farming Compartments (SFCs) was proposed for reusing treated wastewater to decrease the ambient temperature of the SFC via an evaporative cooling system. A prototype SFC with half the original scale (width = 1.8 m, depth = 1.5 m, front height = 1.2 m back height = 0.9 m) was designed, built, and tested in an environmentally controlled laboratory and field site to evaluate the feasibility and effectiveness of the SFC under the climatic conditions in Abu Dhabi. Based on the experimental results, the temperature drops obtained from the SFC in the laboratory and field site were 5 ̊C at initial relative humidity of 60% and 7- 15 ̊C at initial relative humidity of 50%, respectively. An energy simulation using dynamic numerical simulations was performed in comparison to the results of the experiment. The energy-based dynamic simulation shows good agreement with the experimental results. The total power consumption of the SFC system was approximately three and a half times lower than that of an electrical air conditioner.

-529391451442Citation: To be added by editorial staff during production. Academic Editor: Firstname Lastname Received: date Revised: date Accepted: date Published: date Copyright: © 2023 by the authors. Submitted for possible open access publication under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).0Citation: To be added by editorial staff during production. Academic Editor: Firstname Lastname Received: date Revised: date Accepted: date Published: date Copyright: © 2023 by the authors. Submitted for possible open access publication under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).Abstract: SARS-CoV-2 vaccination offered the opportunity to get out of the pandemic and thereby worldwide health, social, and economic disasters. However, in addition to efficacy, safety is an important issue for any vaccine. The mRNA-based vaccine platform is considered to be safe but side effects are being reported more frequently as more and more people around the world become treated. Myo-pericarditis is the major, but not the only cardiovascular complication of this vaccine, hence it is important not to underestimate other side effects. We report a case series of patients affected by cardiac arrhythmias post mRNA vaccine from our clinical practice and the literature. Reviewing the official vigilance database emerged that heart rhythm disorders after Covid vaccination are not uncommon and deserve more clinical and scientific attention. Since Covid vaccine is the only vaccination to have been related to this side effect questions arose about whether these vaccines could affect heart conduction. Although the risk-benefit is clearly in favor of vaccination heart rhythm disorders are not a negligible issue and there are red flags in the literature about the risk of post-vaccination malignant arrhythmias in some predisposed patients. In light of these findings, we investigated the potential mechanism for the Covid vaccine to impact on cardiac electrophysiology and cause heart rhythm disorders.

Bioelectrochemical systems (BES) encompass a group of biobased technologies capable of directly converting organic matter into electricity. In these systems, which are derived from conventional electrochemical systems, the ion exchange membrane represents a key element because of its influence on the economic feasibility and on the performance of BES. This study examines the impact of long-term operation of a BES on the mechanical, chemical and electrochemical properties of five different kind of cation exchange membranes (Nafion-117, CMI-7001, Zirfon UTP 500, FKE and FKB) through several techniques: (i) scanning electron microscopy (SEM) and atomic force microscopy (AFM) to assess the changes on the membranes surface, (ii) thermogravimetric analysis (TGA) to evaluate the structural stability of the membranes, and (iii) ion exchange capacity (IEC) to monitor any change in their electrochemical properties. Results confirmed that there is not an ideal membrane for BES. While Nafion and CMI-7000 exhibited the strongest chemical structure, they also underwent the highest fouling as revealed by a fast increase in surface roughness.

In this article, management control has been studied from the perspective of intention towards sustainable development of companies. The main idea focuses on the analysis of relations between sustainable management control and the system of performance appraisal using as a reference the resource-based theory. These relations have been assessed both theoretically by reviewing literature in the field, and empirically based on data collected in a questionnaire from top management, as well as data from Annual Reports from the main segment of Bucharest Stock Exchange. The authors have shown that financial performance has a significant influence on management control, and the return on capital employed is one of the most recommended indicators. The sustainable nature attributed to management control is the result of institutional theory evolution, provisions of Directive 2014/95/EU and Guide of Global Management Accounting Principles (2015) using stewardship. Consequently, profits are not the main element any more in the assessment of financial „health” of a company. To ensure the sustainable success, sustainable balanced scorecard is one of real measures for managing financial and non-financial performance.

Background: The endocannabinoid system (ECS) is a very heterogeneous array consisting of many proteins like ligands, enzymes and receptors synthetized in various tissues and immunity cells. The main endogenous ligands are unsaturated fatty acid derivatives like anandamide(AEA), 2-arachidonoylglycerol(2-AG), but many others are under study. Endocannabinoids are involved in both physiological and pathological conditions. ECS plays an important role in the regulation of main processes which lead to cancer and also in sex steroid hormone-related cancers. Methods: With focus on gynaecological cancers, main papers and review articles, up to April 2018, on the role of the ECS, were acquired by PubMed searches using the search terms: ‘cancer’, ‘cannabinoid’, ‘endocannabinoid’, ‘gynaecology’ and ‘malignancy’. Results: The review of recent literature data showed the involvement of the endocannabinoid system in numerous physiological and pathological conditions of the female genital tract up to the development of gynaecological malignancy as cervical, endometrial and ovarian cancer. Conclusions: The endocannabinoid system has an important role in antitumor actions involving different signalling receptor and receptor-independent pathways. It represents an exciting challenge to researchers for its potential use in diagnosis and treatment of all gynaecological malignancies

The landscape of centralized cloud computing is now changing to distributed and decentralized clouds with promising impacts on energy consumption, resource availability, resilience, and customer experience. This research highlights the impacts of emerging IT trends, namely, 5G wireless technology, blockchain, and industrial Artificial Intelligence (AI) in development and realization of the next generation of cloud computing. Integration of these technologies in cyber-physical system and cloud manufacturing paradigms is explained and a unified edge-fog-cloud architecture is proposed for successful implementation in manufacturing systems.

Blockchain and Machine Learning gives the best solutions together in performing various tasks in the Smart Health care system. With these two new emerging technologies, that have materialized in the last decade. In this paper, we proposed secure, transparent and intelligent methods in the Internate of medical things industry using Machine learning models and blockchain technology to enhance security level and train our models to improve diagnostic, prevention, treatment of the patient, patient rights, patient autonomy and equality in the health care system.

African trypanosomes are an early branch in eukaryotic evolution and developed a unique endomembrane system as an adaptation to their parasitic life style. The key virulence mechanism of many pathogens is successful immune evasion to enable survival within the host, which is a feature requiring both genetic events and membrane transport in African trypanosomes. Intracellular trafficking not only plays a role in immune evasion, but also in homeostasis of intracellular and extracellular compartments and interactions with the environment. Significantly, historical and recent work has unravelled some of the connections between these processes and highlighted how immune evasion mechanisms associated with adaptations in membrane trafficking may have, paradoxically, provided specific sensitivity to drugs. Here we explore these advances in understanding the membrane composition of the trypanosome plasma membrane and organelles and provide a perspective for how transport could be exploited for therapeutic purpose.

This paper develops a novel energy universal service bus system (EUSBS) based on emerging energy Internet (E-net) technologies. This EUSBS is a unified identification and plug-and-play interface platform to which high penetration distributed energy and equipment (DEE), including photovoltaic (PV), fans, electric vehicle charging stations (EVCSs), energy storage equipment (ESE), and commercial and residential users (CRUs), can access in a coordinated control and optimized utilization mode. First, the functions design, overall framework and topology architecture design of the EUSBS are expounded, among which the EUSBS is mainly composed of a hardware system and a software platform. Moreover, several future application scenarios are presented. Then, the hardware part of EUSBS is designed and developed, including the framework design of this hardware subsystem, and development of the hardware equipment for PV access, fans access, EVCS access, ESE access, and CRU access. The hardware subsystem consists of smart socket, and household/floor/building concentrators. Based on this, the prototypes development of EUSBS hardware equipment is completely demonstrated. Third, the software part of the EUSBS is developed as a cloud service platform for electricity use data analysis of DEE. This software subsystem contains the power quality & energy efficiency analysis module, optimization control module, information and service module, and data monitoring and electricity behavior analysis module. Based on this design, the software interfaces are developed. Finally, an application study on energy management and optimization of a smart commercial building is conducted to evaluate the functions and practicality of this EUSBS. The EUSBS developed in this paper is able to overcome difficulties in big data collection and utilization on sides of distribution network and electricity utilization, and eventually implement a deep information-energy fusion and a friendly supply-demand interaction between the grid and users. This contribution presents a detailed and systematic development scheme of the EUSBS, and moreover, the laboratory prototypes of the hardware and software subsystems have been developed based on E-net technologies. This paper can provide some thoughts and suggestions for the research of active distribution network and comprehensive energy management and optimization in power systems, as well as references and guidance for researchers to carry out research regarding energy management, optimization and coordinated control of the smart buildings.

Taking into account the increase in the emission of greenhouse gases produced by ships, during navigation and maneuvering in the port, a direct consequence of the increase in maritime traffic, the international community has developed a broad set of regulations to limit such emissions. The installation in commercial ports of automatic mooring systems by means of vacuum suction cups (AMS), thus reducing considerably the time required to carry out the mooring and unmooring maneuvers of ships, is a factor that is considerably influencing the decrease in Emissions of polluting gases in commercial ports with high traffic. The objective of the present work is to verify the influence of the use of the AMS on the emissions of polluting gases produced in the facilities destined to the traffic of container ships. It examines the CO2 emissions of container ships that call in the only three container ports equipped with AMS: Salalah (Oman), Beirut (Lebanon) and Ngqura (South Africa). Between them, these three ports supported the transit of 6 million TEUS in 2017. The calculation of emissions is made taking into account the time saved when performing the mooring maneuvers using the new AMS system compared with when it is not used. To do this, two different calculation methods are used: EPA and ENTEC to then compare the results of the two and thus obtain the reduction in emissions per TEU in these terminals during the mooring maneuvers. The paper concludes with a discussion on the values of the reductions in emissions obtained and the advantages of the installation of AMS in commercial ports located near population centres.

Market-orientation is widely applied to understand the expected interaction of smallholder farmers with input and output markets. Commonly used interchangeably with market participation, it is fast becoming a key milestone for attaining smallholder commercialization. This study introduces the term into the disaster resilience, seed systems and livelihoods context. Using a mixed methods approach, 120 smallholder farmers in a drought-affected district of South Africa were sampled, and information collected for analysis. The result shows that most of the farmers rely on purchased seeds and fertilizers for crop production, and on average sold 62% of their farm produce. A market orientation index (MOI) of 55% was estimated, showing that the farmers were market oriented. The farm size, quantities of seeds and fertilizer purchased, value of crop produced, amount received from crop sales, distance to markets and access to credit were found significant in determining their market orientation. Policy interventions were made to improve access to irrigation, seed varieties and extension delivery in the area. The finding has implications for development efforts at rebuilding after a natural disaster, as well as sourcing food aid from local smallholder farmers by humanitarian actors.

This study developed a system dynamics model to understand the spread of coronavirus disease (COVID-19) in Japan. The model is built on the generic SEIR (Susceptible, Exposed, Infected, and Recovered) framework adopted by Ghaffarzadegan and Rahmandad (2020) to build a system dynamics model for the spread of COVID-19 in Iran. Japan seems to be successful in containing the spread compared with other countries, and its first peak has passed. However, because this also leaves a large population still susceptible to the virus, it could cause a second and potentially higher peak of infection after the state of emergency aimed at reducing contact rate is lifted. As the government has proposed the “New Lifestyle,” it is critical to behave cautiously so as not to be infected. While the model focuses on the SEIR structure, the reflection of other sub-structures such as economy and hospital capacity that have tradeoffs with reducing contact rate should be beneficial. However, before extending the model, it is also critical to conduct estimates using confidence intervals rather than point estimates to better reflect uncertainties.

In this study, we examine the relationship of bank level lending and borrowing decisions and the risk preferences on the dynamics of the interbank lending We develop an agent-based model that incorporates individual bank decisions using the temporal difference reinforcement learning algorithm with empirical data of 6600 S. banks. The model can successfully replicate the key characteristics of interbank lending and borrowing relationships documented in the recent literatur A key finding of this study is that risk preferences at individual bank level can lead to unique interbank market structures which are suggestive of the capacity that the market responds to surprising

With confirmed COVID-19 cases surpassing the 8.5 million mark around the globe, there is an imperative need to deepen the efforts from the international scientific community to gain comprehensive understanding of SARS-CoV-2. Although the main clinical manifestations are associated with respiratory or intestinal symptoms, reports of specific and non-specific neurological signs and symptoms, both at presentation or during the course of the acute phase, are increasing. Approximately 25-40% of the patients present neurological symptoms. The etiology of these neurological manifestations remains obscure, and probably involves several direct pathways, not excluding the direct entry of the virus to the Central Nervous System (CNS) through the olfactory epithelium, circumventricular organs, or disrupted blood-brain barrier (BBB). Furthermore, neuroinflammation might occur in response to the strong systemic cytokine storm described for COVID-19, or due to dysregulation of the CNS angiotensin system. Descriptions of neurological manifestations in patients in the previous coronavirus (CoV) outbreaks have been numerous for the SARS-CoV and lesser for MERS-CoV. Strong evidence from patients and experimental models suggests that some human variants of CoV have the ability to reach the CNS and that neurons, astrocytes and/or microglia can be target cells for CoV. A growing body of evidence shows that astrocytes and microglia have a major role in neuroinflammation, responding to local CNS inflammation and/or to dysbalanced peripheral inflammation. This is another potential mechanism for SARS-CoV-2 damage to the CNS. In this work we will summarize the known neurological manifestations of SARS-CoV-2, SARS-CoV and MERS-CoV, explore the potential role for astrocytes and microglia in the infection and neuroinflammation, and compare them with the previously described human and animal CoV that showed neurotropism. We also propose possible underlying mechanisms by focusing on our knowledge of glia, neurons, and their dynamic intricate communication with the immune system.

Structural system design is the process of giving form to a set of interconnected components subjected to loads and design constraints while navigating a complex design space. While safe designs are relatively easy to develop, optimal designs are not. Modern computational optimization approaches employ population based metaheuristic algorithms to overcome challenges with the system design optimization landscape. However, the choice of the initial population, or ground structure, can have an outsized impact on the resulting optimization. This paper presents a new method of generating such ground structures, using a combination of topology optimization (TO) and a novel system extraction algorithm. Since TO generates monolithic structures, rather than systems, its use for structural system design and optimization has been limited. In this paper, truss systems are extracted from topologies through morphological analysis and artificial intelligence techniques. This algorithm, and its assessment, constitutes the key contributions of this paper. The structural systems obtained are compared with ground truth solutions to evaluate the performance of the algorithms. The generated structures are also compared against benchmark designs from the literature. The results indicate that the presented truss generation algorithm produces structures comparable to those generated through metaheuristic optimization, while mitigating the need for assumptions about initial ground structures.

A dogma is normally considered as a principle or a belief accepted as an indisputable truth by some individuals and/or groups. Theoretically there can be no dogmas in science, but it has been demonstrated that scientific thought operates by conceptual changes. A dogma therefore can be understood as a concept present at the heart of some contemporary research programmes that need to be altered to overcome paradigms. Here we argue that two ideas relating to emergence of the biological system research need to be re-evaluated. First, is the idea that research programmes about the emergence of the biological system are the same as those of the origin of cells. Cells are strikingly important biological entities, hard core concepts for the entire field of biology. The emergence of the biological system happened much earlier than the origin of cells and thus the First Universal Common Ancestor (FUCA) should be viewed as a great-grandfather to the Last Universal Cellular Ancestor (LUCA); i.e. the latter is the first cellular life form. Second, RNA-world theories are the focus of mainstream research programmes for the origin of life stricto sensu. In the RNA-world view, self-replication of nucleic acids is seen as one of the most relevant events in the pre-biotic world. Without denying the relevance of self-replication, we argue here that the most germane event which occurred in the pre-biotic world was the crosstalk between nucleic acids and peptides. When these two macromolecules started to interact, the singularity that aggregated the complexity required to produce life emerged. Thus, comprehension of the early origins of the translation machinery and the assembly of the genetic code is key. Therefore, the relevance of cell theory and self-replication should be re-evaluated as well as the concept of life itself.

This review summarizes the use of CRISPR system in yeasts, identifying advantages and disadvantages of its applications. 39 articles were evaluated including 12 articles that discussed the advantages of new CRISPR systems that improved the initial system, and another 27 were evaluated, among these: three were applications in Cryptococcus neoformans, four in candida sp., three in Schizosaccharomyces pombe, nine in Saccharomyces cerevisiae, four in Yarrowia lipolytica, and four in industrially important yeasts such as Pichia pastoris and Saccharomyces pastorianus. It was concluded that the CRISPR system is one of the most versatile genetic editing systems available nowadays. It can be applied in different organisms for several effects including gene knock-outs, performing point mutations, gene expression, or even applying multiple edition operations in several genes. However, we recognize that numerous studies lack a control group of the mutated strains, which leaves many questions unanswered. For instance, the extent and precision of this techniques, it also represents a risk to biosecurity standards. Therefore, this review shows the compilation of CRISPR system information, which could be used to generate different alternatives in the industry and clinical fields.

There are four subtypes of adenosine receptors (ARs), named A1, A2A, A2B and A3, all of which are G protein-coupled receptors. The A2BAR, coupled to both Gαi and Gαq G proteins, is one of the several G-protein-coupled receptors that are expressed in a significantly higher level in some cancer tissues in comparison to adjacent normal tissues. There is growing evidence that the A2BAR plays an important role in tumor cell proliferation, angiogenesis, metastasis, and immune suppression. Thus, A2BAR antagonists are potentially novel attractive anticancer agents. Several antagonists targeting at the A2BAR are currently in clinical trials for various types of cancers. In this review, we first describe the signaling, agonists, and antagonists of the A2BAR. We further discuss the role of the A2BAR in the progression of various types cancers, and the rationale of using A2BAR antagonists in cancer therapy

. In today’s world, cyber attack is one of the major issues concerning the organizations that deal with technologies like cloud computing, big data, IoT etc. In the area of cyber security, intrusion detection system (IDS) plays a crucial role to identify suspicious activities in the network traffic. Over the past few years, a lot of research has been done in this area but in the current scenario, network attacks are diversifying in both volume and variety. In this regard, this research article proposes a novel IDS where a combination of information gain and decision tree algorithm has been used for the purpose of dimension reduction and classification. For experimental purpose the NSL-KDD dataset has been used. Initially out of 41 features present in the dataset only 5 high information gain valued features are selected for classification purpose. The applicability of the selected features are evaluated through various machine learning based algorithms. The experimental result shows that the decision tree based algorithm records highest recognition accuracy among all the classifiers. Based on the initial classification result a novel methodology based on decision tree has been further developed which is capable of identifying multiple attacks by analyzing the packets of various transactions in real time.

A plenty of theories on the origin of genetic codes have been proposed so far, yet all ignored the energetic driving force, its relation to the biochemical system, and most importantly, the missing “matchmaker” between proteins and nucleic acids. Here, a new hypothesis is proposed, according to which ATP is at the origin of the primordial genetic code by driving the coevolution of the genetic code with the pristine biochemical system. This hypothesis aims to show how the genetic code was produced e.g. by photochemical reactions in a protocell that derived from a lipid vesicle enclosing various life’s building blocks (e.g. nucleotides and peptides). At extant cell, ATP is the only energetic product of photosynthesis, and is at the energetic heart of the biochemical systems. ATP could energetically form and elongate chains of both polynucleotides and polypeptides, thus acting a “matchmaker” between these two bio-polymers and eventually mediating precellular biochemical innovation from energy transformation to informatization. ATP was not the only one that could drive the formation of polynucleotides and polypeptides, but favored by precellular selection. The protocell innovated a photosynthesis system to produce ATP efficiently and regularly with the aids of proteins and RNA/DNA. The completion of permanently recording the genetic information by DNA marked the dawn of cellular life operated by Darwinian evolution. The ATP hypothesis assumes or supports the photochemical origin of life, shedding light on the origins of both photosynthetic and biochemical systems, which remains largely unknown thus far. Based on ATP hypothesis, virus (like the new coronavirus) could not be the earliest life on Earth, as it has neither biochemical systems nor lipid bilayer membrane that provided relatively isolated environment for the development of protobiochemical reactions, although it owns the genetic code of a cellular life. Virus could not be a bridge between life and non-life, but is an anti-life substance, as it depletes cellular material for its own replication, and then spreads by destroying the host cells. It can be imagined that if cellular life are completely wiped out by the virus, the complete destruction of life on Earth would be inevitable.

A growing number of studies suggest that SARS-CoV-2 could interfere with homeostatic mechanisms in the lung but the implications of this possible interference have not been fully explored in the literature. In this work, we examine the consequences that can be drawn from this hypothesis according to currently available knowledge. We suggest that one such consequence is the potential disruption of normal ventilation and perfusion of lung regions that may be distant from the infection sites. Loss of ventilation might result in local alveolar hypoxia and contribute to hypoxemia, which in turn could trigger homeostatic responses that enhance blood oxygenation by redistributing pulmonary blood circulation. Sudden changes in perfusion might then lead to the development of hydrostatic edema and eventually to vascular remodeling and inflammation. Therefore, the immune response might not be the only source of the substantial inflammation observed in lung tissues of patients with severe COVID-19, as is often assumed in the literature. The balance between the homeostatic and the immune reaction in each patient could account for the observed heterogeneity of the clinical manifestations of COVID-19.

Oil has become the object of global exploits and fierce competition among the major world powers as it is a key strategic non-renewable resource. Transnational petroleum investment is therefore an important mechanism available to countries and international corporations to control oil resources even though there are numerous inherent uncertainties and risks. A new risk assessment index system is proposed in this paper based on use of the Delphi expert scoring system and fuzzy comprehensive evaluation that aims to minimize the potential risks inherent to multinational petroleum investment. This approach encapsulates political, legal, socioeconomic, and infrastructural factors to develop a technical method that can be used for transnational petroleum investment risk assessment. An evaluation of oil investment risk within a case study area is also presented; results provide reference data that can be applied by national and international oil companies to mitigate risks of transnational oil investment.

This paper presents a novel micro-segmented genetic algorithm (μsGA) to identify the best solution for the locomotion of a quadruped robot designed on a rectangular ABS plastic platform. We compare our algorithm with three similar algorithms found in the specialized literature: a standard genetic algorithm (GA), a micro-genetic algorithm (μGA), and a micro artificial immune system (μAIS). The quadruped robot prototype guarantees the same conditions for each test. The platform was developed using 3D printing for the structure and can accommodate the mechanisms, sensors, servomechanisms as actuators. It also has an internal battery and a multicore embedded system (mES) to process and control the robot locomotion. This research proposes a μsGA that segments the individual into specific bytes. μGA techniques are applied to each segment to reduce the processing time; the same benefits as the GA are obtained, while the use of a computer and the high computational resources characteristic of the GA are avoided. This is the reason why some research in robot locomotion is limited to simulation. The results show that the performance of μsGA is better than the three other algorithms (GA, μGA and AIS). The processing time was reduced using a mES architecture that enables parallel processing, meaning that the requirements for resources and memory were reduced. This research solves the problem of continuous locomotion of a quadruped robot, and gives a feasible solution with real performance parameters using a μsGA bio-micro algorithm and a mES architecture.

Hand gestures may play an important role in medical applications for health care of elderly people, where providing a natural interaction for different requests can be executed by making specific gestures. In this study we explored three different scenarios using a Microsoft Kinect V2 depth sensor then evaluated the effectiveness of the outcomes. The first scenario utilized the default system embedded in the Kinect V2 sensor, which depth metadata gives 11 parameters related to the tracked body with five gestures for each hand. The second scenario used joint tracking provided by Kinect depth metadata and depth threshold together to enhance hand segmentation and efficiently recognize the number of fingers extended. The third scenario used a simple convolutional neural network with joint tracking by depth metadata to recognize five categories of gestures. In this study, deaf-mute elderly people execute five different hand gestures to indicate a specific request, such as needing water, meal, toilet, help and medicine. Then, the requests were sent to the care provider’s smartphone because elderly people could not execute any activity independently. The system transferred these requests as a message through the global system for mobile communication (GSM) using a microcontroller.

This paper presents the results of quantitative research regarding the predictive model of citizens' attitudes about the risks of introducing the death penalty in the Republic of Serbia legal system. The research was conducted with the use of a questionnaire that was requested and then collected online from 427 people in June 2021. A multivariate regression analysis was used, identifying the extent to total scores of the main dependent variables (introducing the death penalty; trust in the legal system; advantages of introduction; disadvantages of introduction scores) were associated with five demographic and socio-economic variables: gender, marital, education, income, and age. We tested the central hypothesis of which gender is predicting variables citizens' attitudes about the risks of introducing the death penalty in the legal system of Serbia. The findings revealed that gender and educational level were the most effective predictors of the research variables under question. The majority of respondents support the introduction of the death penalty and the most important predictor of disadvantages of introducing the death penalty in the legal system is age. Based on the findings that there are major differences in the citizens' attitudes about the risks of introducing the death penalty in the legal system, policies, strategies, and regulations must take into account these very important findings.

Abstract Introduction:The Robert Koch Institute (RKI) managed the exchange of cross-border contact tracing data between public health authorities (PHA) in Germany and abroad during the COVID-19 pandemic. Aim: We aimed to describe the extent of RKI cross-border contact tracing and the challenges experienced. Methods:We analysed cross-border COVID-19 contact tracing events from 03 February to 05 April 2020 using information exchanged through the European “Early Warning Response System” (EWRS) as well as communication with International Health Regulation (IHR) national focal points. We described events by PHA involved, number of contact persons and exposure context. Results:The RKI processed 467 events, initiating contact to PHA 1,099 times (median 1, IQR [1;2]) and sharing data on 5,099 contact persons. Of 327 (70%) events with known exposure context, most common reported were exposures on aircraft 64 (14%), on cruise ships 24 (5%) and exposures related to non-transport contexts 210 (45%). Cruise ship and aircraft exposures yielded higher median numbers of authorities contacted (10[2;16], 4[2;11]) and contact persons (60 [9;269], 2[1;3]) than non-transport related exposures (1[1;6] and 1[1;2]), respectively. The median time spend on contact tracing activities was the highest for cruise ships: 5 days [IQR 3;9]. Conclusion:In the current COVID-19 pandemic cross-border contact tracing is considered a critical component of the outbreak response. While the majority of international contact tracing activities did not relate to exposure events in transport, they contributed substantially to the workload. The numerous communications highlight the need for fast and efficient global outbreak communication channels between PHA.

Recently, the phase-sensitive OTDR (Φ-OTDR) based vibration sensor system has gained the focus of many researchers and some efforts have been undertaken to push further the limitations imposed on the performance of the Φ-OTDR sensor system. Then, progress in the different areas of its performance evaluation factors such as: improvement of the signal-to-noise ratio (SNR), spatial resolution (SR) in the sub-meter range, enlargement of the sensing range, frequency response bandwidth over the conventional limit and phase signal demodulation for quantitative measurement have been realized. This paper presents an overview of the recent progress in the Φ-OTDR based vibration sensing system in the different areas mentioned above.

This research presents alternative solutions for an Energy Efficiency Management System (EEMS) serving as a framework for optimizing the energy consumption algorithm and lowering energy consumption. First, a monitoring Wireless Sensor and Actuator Network (WSAN) is used for sensing, measuring, gathering data, and modeling all the dynamic disturbance parameters of the rooms in the building. Second, integrated software for metering and controlling the processes of digital data flow is used. Third, an alternative solution is proposed to reduce energy consumption. The primary benefits of this system are real-time monitoring; rapid, alternative solutions; and the ability to make a prudent decision on how to lower energy consumption. The system shows instant and accumulated solutions for short and long-term time planning. The solutions identified can be implemented in the same buildings under the same circumstances. The universities of Majmaah and Philadelphia have buildings with similar infrastructure. The system was applied to the buildings at Philadelphia University. The results were generalized to both universities. After implementation, the energy consumption of the EEMS using WSAN (based on the monitoring was reduced up to 23% when compared to that of the initial state.

Causality is the most important topic in the history of Western Science, and since the beginning of the statistical paradigm, it meaning has been reconceptualized many times. Causality entered into the realm of multi-causal and statistical scenarios some centuries ago. Despite of widespread critics, today Deep Learning and Machine Learning advances are not weakening causality but are creating a new way of finding indirect factors correlations. This process makes possible us to talk about approximate causality, as well as about a situated causality.

Pre-Western contact Hawaiʻi stands as a quintessential sustainability example of a large human population that practiced intensive agriculture, yet minimally displaced native habitats that comprised the foundation of its vitality. An explicit geospatial footprint of human-transformed areas across the pre-contact Hawaiian archipelago comprised less than 15% of total land area, yet provided 100% of human needs, supporting a thriving Polynesian society. A post-contact history of disruption of traditional Hawaiian land-use and its supplanting by Western land tenure and agriculture based on ranching, sugarcane, and pineapple, culminated in a landscape, in which over 50% of native habitats have been lost, while self-sufficiency has plummeted to 15% or less. Recapturing the ʻāina momona (productive lands) of ancient times can be accomplished through study of pre-contact agriculture, assessment of biological and ecological changes imposed on Hawaiian social-ecological systems, and conscious planned efforts to increase self-sufficiency and reduce importation. Impediments include the current tourism-based economy, competition from habitat-modifying introduced species, a suite of agricultural pests severely limiting traditional agriculture, and changes in climate rendering some pre-contact agricultural centers suboptimal. Modified agricultural methods will be required to counteract these limitations, and diversified agriculture to broaden the production base, without contributing to further degradation of native habitats.

In the repercussions of the latest financial crisis that have occurred on the years 2008-2009, to fortify the stability of the banking systems, policy makers, and the Basel Committee on Banking Supervision – BCBS, together with national regulators have built up a few safety measures, and structures to guarantee that banks establishments keep up adequate capital levels through using risk management tools, in specific the Internal Capital Adequacy Assessment Processes (ICAAP). They all have called for thorough evaluations and assessments for the structure and components of risk management frameworks, tools, and practices whether by banks, regulators, analysts and risk management experts consistently, to ascertain the adequacy of the banking systems, policies, arrangements and techniques for overseeing risks, and guaranteeing the sufficiency of holding appropriate capital levels for confronting normal, as well as adverse and unexpected situations or emergencies. The main objectives of this research study is to shed the light on the ICAAP as one of the main keys of risk management programs, a process by which banks can use to ensure that they operate with an appropriate levels of capital, forward looking processes for capital planning covering a broad range of risks across banks, activities beyond simple capital management, and brings together risk and capital management activities in a form that can be used to support business decisions. The research study shall evaluate the significant relationship between the Banking System Stability (dependent variable) and the Internal Capital Adequacy Assessment Process (ICAAP – independent variable) with evidence from the Egyptian Banking Sector.

This paper introduces a closed-loop control strategy for maintaining consistency of liquid temperature in commercial Drop on Demand (DoD) inkjet printing. No additional sensors or additional actuators are installed in the printhead while achieving the consistency in liquid temperature. To this end, this paper presents a novel in situ sensing-actuation policy at every individual liquid-nozzle, where the jetting mechanism has three distinct roles. It is used for jetting liquid droplet onto the print media based on the print-job. It is used as a soft sensor to estimate the real-time liquid temperature of the jetting nozzle. While not jetting liquid, it is used as a heating actuator to minimize the gradient of liquid temperature among nozzles. The soft sensing based in situ controller is implemented in an experimentally validated digital twin that models the thermo-fluidic processes of the printhead. The digital twin is scalable and flexible to incorporate an arbitrary number of liquid-nozzles, making the control strategy applicable for future designs of the printhead.

In manual maintenance inspections of large-scaled photovoltaic (PV) or rooftop PV systems, several days are required to survey the entire PV field. To improve reliability and shorten the amount of time involved, this study proposes an electrical examination based method for locating multiple faults in the PV array. The maximum power point tracking (MPPT) algorithm is used to estimate the maximum power of each PV panel; this is then compared with metering the output power of PV array. Power degradation indexes are parameterized to quantify the degradation between maximum power and metered output power. Bidirectional hetero-associative memory (BHAM) networks are then used to locate multiple faults within the entire PV field. For a rooftop PV system with two strings, as seen in Figure 1, experimental results demonstrate that the proposed model has computational efficiency for real-time applications and that its algorithm is easily implemented in a mobile intelligent vehicle.

This review discusses the distribution pattern, nesting style, mating behavior, and colony structure of the Asian weaver ants (Oecophylla smaragdina) in Asia. Recent findings suggested that weaver ant occurrences are not only limited to tropical rainforests biome, agroforestry and large monoculture fields, but have encroached human rural habitation including densely populated urban areas. Comparatively, O. longinoda and O. smaragdina are taxonomically classified as two distinct species, but the main differences between them are strongly dependent on the allopatric nature or geographical speciation of their distribution. Although weaver ants are dominant ubiquitous and conspicuous arboreal insects with a predilection for habitation in trees canopies, viable nests colonies on the ground have been reported in Thailand. O. smaragdina usually construct their polydomous nests (multiple satellites nests arrangement within a single host but diverse plants species) by weaving tree-leaves using their larval silk. Knowledge on mating behavior is rudimentary; hence more studies are needed especially in understanding how weather parameters affect nuptial flight swarming act. At the colony organization level, comprehensive reports about minor and major workers contrasts with the poorly documented but significant intermediate size of workers caste. The versatile impact of Asian Oecophylla is offering important ecological subsistence services to both the nature and humans. This is by combining positive economic implications to food security concern with a provision of organic nutrients for host plants and highly healthful diet enhancer (nourishing-medicinal). Despite its wide presence in large oil palms monoculture, only one report had exposed weaver ants’ potential positive ecological impact (i.e. predation on bagworms Pteroma pendula) in Southeast Asia.

Cloud robotics is becoming an alternative to support advanced services of robots with low computing power as network technology advances. Recently, fog robotics has gained attention since the approach has merit relieving latency and security issues over the conventional cloud robotics. In this paper, a Function-as-a-Service based Fog Robotic (FaaS-FR) for cognitive robots is proposed. The model distributes the cognitive functions according to the computational power, latency and security with a public robot cloud and fog robot server. During the experiment with a Raspberry Pi as an edge, the proposed FaaS-FR model shows efficient and practical performance in the proper distribution of the computational work of the cognitive system.

The low relative humidity (RH) levels in a greenhouse during the daytime in a strawberry (Fragaria × ananassa Duch) cultivation period negatively affect the growth of strawberry related to photo-physiology. Therefore, this study was conducted to confirm an efficient RH management method by analyzing the phenotypic characteristics related to photo-physiology by controlling the RH in a greenhouse during the daytime with a fog system. Strawberry plants were grown respectively in a greenhouse affected by natural RH changes (control) and in a greenhouse with 40% ~ 50% RH adjusted during the daytime using a fog system. In the greenhouse, with controlled RH, the temperature decreased, and the RH was higher in the initial growth stage of strawberry planting than the control. It was observed a significant increase in the survival rate of the strawberry plant, as well as the incidence of powdery mildew, was lowered. In addition, the photosynthetic rate and OJIP chlorophyll a fluorescence transients related to photosystem II efficiency of strawberry leaves were significantly higher in the fog treatment than in the control. In winter, during the day, the number of days on which the temperature dropped below 20℃ has increased, the greenhouse temperature with controlled RH was lower due to the fog system. When the yield per strawberry plant in January and February was investigated, the control was higher than the RH treatment. Therefore, RH management using a fog system must be controlled at a level where a temperature range is adequate for plant growth, in which the efficient control of these parameters increases strawberry productivity.

The phonon modes in YBa₂Cu₃O_7-δ and YBa_2-xLa_xCu₃O_7-δ systems have been systematically studied by Raman spectroscopy. The new phonon modes of 104 cm^-1, 94 cm^-1, and 89 cm^-1 were found in all these samples. A crude estimate about the wavenumber of the collective vibration of the stable CuO2 plane was given in this paper. The standard deviations of the new phonons in YBa₂Cu₃O_7-δ and YBa_2-xLa_xCu₃O_7-δ systems were discussed. The results of the calculation indicated that the 104 cm^-1 mode probably stands the c-direction collective vibration of the stable CuO2 plane, the 94 cm^-1 mode stands the a-direction vibration, and the 89 cm^-1 mode stands b-direction vibration. The relevance between these phonons and the superconductivity was discussed. It is found that, as the T_c decreased, the 104 cm^-1 mode and the 94 cm^-1 mode softened, and the 89 cm^-1 mode hardened slightly.

The present paper deals with the retrofitting of unreinforced masonry (URM) buildings, subjected to in-plane shear and out of-plane loading when struck by an earthquake. After an introductive comparison between some of the latest punctual and continuous active retrofitting methods, the authors focused on the two most effective active continuous techniques, the CAM system and the Φ system, which also improve the box-type behavior of buildings. These two retrofitting systems allow us to increase both the static and dynamic load-bearing capacity of masonry buildings. Nevertheless, information on how they actually modify the stress field in static conditions is lacking and sometimes questionable, in the literature. Therefore, we performed a static analysis in the plane of Mohr/Coulomb, with the dual intent to clarify which of the two is preferable under static conditions and whether the models currently used to design the retrofitting systems are fully adequate.

The main purpose of this paper is to present a system to detect extrusion failures in Fused Deposition Modelling (FDM) 3D printers by sensing that the filament is moving forward properly. After several years using these kind of machines, authors detected that there is not any system to detect the main problem in FDM machines. Authors thought in different sensors and used the Weighted Objectives Method, one of the most common evaluation methods, for comparing design concepts based on an overall value per design concept. Taking into account the obtained scores of each specification, the best choice for this work is the optical encoder. Once the sensor is chosen, it is necessary to design de part where it will be installed without interfering with the normal function of the machine. To do it, photogrammetry scanning methodology was employed. The developed device perfectly detects the advance of the filament without affecting the normal operation of the machine. Also, it is achieved the primary objective of the system, avoiding loss of material, energy and mechanical wear, keeping the premise of making a low-cost product that does not significantly increase the cost of the machine. This development has made it possible to use the printer with remains coil filament, which were not spent because they were not sufficient to complete an impression and also printing models in two colours with only one extruder.

The history of health records (later also called medical records), including ones regarding individual patients, is thousands of years old. It finds it roots in the first ancient civilisations. Up until the 19^th century the records’ purpose was mainly an educational one. In the 19^th and 20^th century they started becoming significant in other roles as well, including those not strictly limited to medicine. In particular, to account for medical procedures, insurance proceeds or legal action. Currently we are living in a revolutionary era when it comes to health records, in which their character has changed from a “paper-based” to an electronic one. This paper presents the development of health records from the ancient to modern times, mainly in Europe and North America. Other cultures and civilisations, including China and India, are not discussed. An analysis of available sources was conducted, inter alia digital versions of manuscripts up to hundreds of years old. The analysis was based on PubMed and Google Scholar (several key words, all the available sources). Sources published in non-international languages (e.g. Dutch) were also investigated. Overall, approximately 600 articles were analysed, 158 of which were used and cited in this paper. The conclusions drawn from the analysis are as follows: (1) Health records, priorly used mostly for educational purposes, for about 100 years now have acquired a fully formal status. (2) We are currently facing the most revolutionary changes regarding the transformation of paper-based records into electronic ones. (3) The consequences of this process include systematic applications of solutions within the area of e-health, which allow us to make medical services more flexible, improve the health of individual patients and entire populations and potentially limit expenditure. (4) In the light of the ongoing COVID-19 pandemic, introducing electronic health records could be beneficial in terms of limiting the potential sources of contamination (physical copies of health records), saving time and resources, and improving the network of communication between medical centres.

Alzheimer’s Disease (AD) is a neurodegenerative condition that currently has no known cure. The principles of the expanding field of network medicine (NM) have recently been applied to AD research. The main principle of NM proposes that diseases are much more complicated than one mutation in one gene, and incorporate different genes, connections between genes, and pathways that may include multiple diseases to create full scale disease networks. AD research findings as a result of the application of NM principles have suggested that functional network connectivity, myelination, myeloid cells, and genes and pathways may play an integral role in AD progression, and may be integral to the search for a cure. Different aspects of the AD pathology could be potential targets for drug therapy to slow down or stop the disease from advancing, but more research is needed to reach definitive conclusions. Additionally, the holistic approaches of network pharmacology in traditional Chinese medicine (TCM) research may be viable options for the AD treatment, and may lead to an effective cure for AD in the future.

Biogenic emissions affect the urban air quality as they are ozone and SOA precursors and should be taken into account when applying photochemical pollution models. The present study presents an estimation of the magnitude of Non-Methane Volatile Organic Compounds emissions (NMVOCs) emitted by vegetation over Greece. The methodology is based on computation performed with the aid of a Geographic Information System (GIS) and theoretical equations in order to develop an emission inventory on a 6x6 spatial resolution, in a temporal resolution of 1hr covering one year (2016). For this purpose, a variety of input data was used: improved satellite land-use data, land-use specific emission potentials, foliar biomass densities, temperature and solar radiation data. Hourly, daily and annual isoprene, monoterpenes and other volatile organic compounds (OVOCs) were estimated. In the area under study, the annual biogenic emissions were estimated up to 472 kt, consisting of 46.6% isoprene, 28% monoterpenes and 25.4% OVOCs. Results delineate an annual cycle with increasing values from March to April, while maximum emissions were observed from May to September, followed by a decrease from October to January.

Computers and artificial intelligence affect every field of life nowadays. In medical image interpretation automatic decision making using algorithms are used increasingly in every sub-field and computer aided diagnosis (CAD) is one of the main tools available to medical science today. CAD systems are used as an augmented option for both the medical practitioner and the patients, with image analysis and interpretation being of primary importance. In particular, spatial relations are used in knowledge representation, and these relations can be used for effective medical image interpretation. In this paper, we put forth an algorithm for defining non-small cells lungs cancer (NSCLC) stages in lungs images interpretation using topological spatial relations. We show an application case study in event motion predictions for lung cancer staging scoring - tumor, nodes and metastasis (TNM) - with combined topological and directional relations.

Many of the wide-ranging symptoms of COVID-19 have not been associated previously with a respiratory illness. A similarity between these atypical symptoms and the symptoms of malnutrition was observed. To investigate, a comparison of COVID-19 symptomatology with recognised states of malnutrition showed a significant relationship that was further explored in a review of the literature. This hypothesis links the atypical symptoms to the effects of increasing protein malnutrition. The rapid appearance of malnutrition symptoms at the beginning of the COVID-19 infection is concurrent with the rapid cell proliferation of the immune system. Although previous work has, in general, assumed that the body is capable of providing for the needs of the immune system during infection, heightened immune activity from the commencement of COVID-19 could require an early increase in energy yielding sources. Should insufficient availability of protein resources occur, this could quickly lead to malnutrition. Any continuing insufficiency, during the active phase of the virus, might result in widespread depletions in the tissues and the consequential malfunctioning of many organs. A new appraisal of the immune system requirements needed to counteract the impact of the novel virus, COVID-19, could show the potential benefit for earlier protein intervention in the disease process. This hypothesis could also have relevance for other life situations where a rapid cell proliferation might occur.

The construction industry is one of the most fatal industries, so it is important to pay more attention to safety solutions. Even though work-related accidents are known as major waste in construction projects, little attention has been paid so far to incorporating safety into the lean construction framework. In this research, lean construction theory is reviewed through the lens of safety. That being so, the identified challenges in previous research on improving safety in construction projects are categorized and those related to the concept of lean project delivery are introduced. Then, the principles of the lean construction framework are explained and the relevant changes for incorporating safety into the framework are introduced and discussed. It is expected that this hybrid model would further enrich the lean construction framework. The careful attention of project executives to this model may improve the safety situation in construction projects.

Accruing evidence on the influence of β-carotene regarding the prevention of several chronic diseases - in addition to its well-acknowledged role in vision has been a strong driver for developing alternative delivery systems. Though oral delivery is accepted as the most fitting, mild and safe path for delivering bioactive agents, β-carotene delivery via food items poses challenges due to its lipophilic nature, poor water-solubility, high chemical/photochemical instability and poor oral bioavailability. Nanotechnology has opened new windows for delivering bioactive agents. Their physiochemical characteristics, i.e. small size, high surface area, unique composition, biocompatibility and biodegradability make these nanomaterials an attractive tool for β-carotene delivery. Delivering β-carotene through nanoparticles does not only improve its bioavailability/bioaccumulation in target tissues, but also lessens its sensitivity against environmental factors during processing. Regardless of these benefits, nanocarriers inherit some limitations, such as variations in sensory quality, modification of the food matrix, increasing costs, as well as limited consumer acceptance and regulatory challenges. This research area has been rapidly evolved, with a plethora of innovative nano-engineered materials, including micelles, nano/microemulsion, liposomes, niosomes, solid-lipid nanoparticles and nanostructured lipid carriers. These nano-delivery systems make conventional delivery systems appear archaic and promise better solubilization, protection during processing, improved shelf-life, higher bioavailability as well as controlled and targeted release. This review provides information on the state of knowledge on β-carotene nano-delivery systems adopted for developing functional foods: depicting their classification, composition, preparation methods, challenges, release-and absorption of β-carotene in the GIT and possible risks and future prospects.

The release profiles of methotrexate, an anticancer drug, from the monoolein liquid crystalline cubic phases were studied. The cubic phases were used either in the form of a lipidic film deposited onto a glassy carbon electrode surface or in the dispersed form of magnetocubosomes, which are considered a prospective hybrid drug delivery system. Commonly, cubosomes or liposomes are employed, but not in the case of toxic methotrexate, known to block receptors responsible for folate transport into the cells. The release profiles of the drug from the lipidic films were monitored electrochemically and described using the Higuchi model. They were also modified via changes in temperature; the release was faster, although deviating from the model when the temperature was increased. Magnetocubosomes - cubic phase nanoparticles containing hydrophobic magnetic nanoparticles placed in an alternating magnetic field of low frequency and amplitude, stimulated drug release from the suspension, which was monitored spectroscopically. These new biocompatible hybrid materials are very promising, allowing to control the release of the drug at the appropriate sites, but do require further investigations into their in vitro cytotoxicity and in vivo biodistribution.

Building more energy efficient and sustainable urban areas that will both mitigate the effect of climate change and adapt for the future climate, requires the development new tools and methods that can help urban planners, architect and communities achieve this goal. In the current study, we designed a workflow that links different methodologies developed separately, to derive the energy consumption of a university school campus for the future. Three different scenarios for typical future years (2039, 2069, 2099) were run as well as a renovation scenario (Minergie-P). We analyse the impact of climate change on the heating and cooling demand of the buildings and determined the relevance of the accounting of the local climate in this particular context. The results from the simulations showed that in the future there will a constant decrease in the heating demand while for the cooling demand there will be a significant increase. It was further demonstrated that when the local climate was taken into account there was an even higher rise in the cooling demand but also that the proposed renovations were not sufficient to design resilient buildings. We then discuss the implication of this work on the simulation of building energy consumption at the neighbourhood scale and the impact of future local climate on energy system design. We finally give a few perspective regarding improved urban design and possible pathways for the future urban areas.

Hypertension is a common and growing medical problem that leads to enormous cardiovascular and kidney disease worldwide. While many drugs exist to treat hypertension, there is large individual variation in how a given individual responds to different agents, which contributes to dismal rates of hypertension control. While demographic factors predict which drugs may work better in certain individuals, a great degree of this variation has a genetic basis. In recent years, genome wide association studies have begun to identify specific gene variants that predict drug response to particular agents. This review identifies the major genetic variants influencing antihypertensive response that have emerged from this growing body of work. For novel genetic variants without a previously known biologic basis in blood pressure, it is crucial to validate initial findings in subsequent studies. This information may eventually lead to a more personalized approach to hypertension management that will improve blood pressure control and patient outcomes. The integration of this large amount of data and its real world application will be highly challenging, but strategies to accomplish this are discussed.

The European system of indicators is the result of the European Union sustainable development strategy, based on the objectives of economic prosperity, social equity, cohesion and environmental protection. In 2010 the EC defined four strategic priorities: encourage competitiveness in the tourism sector, promote sustainable high-quality tourism, strengthen the image of Europe as a tourism destination, and finally, improve EU financial policies and instruments. This paper aims to analyze in a positive critical perspective the experience done during the period 2013-2014 in the Italian destination Visit South Sardinia. This experience is in one hand an important primacy in Italy and in Europe, but in the other hand has not reached the expected objectives. Many difficulties were encountered both for data collection and for stakeholder involvement. Also the complexity of the indicators tool kit is relevant. Even if the experience of VSS did not produce the expected results, we believe that the analysis carried out in this paper can help and support other countries and or other destination in Europe in the process of implementation of the ETIS indicators tool kit in order to adapt the system itself to the needs that are encountered locally.

Corporate governance is widely suggested by economists and regulators as a solution to reduce agency problems and improve firm performance. However previous studies have failed to generate consistent results. Using a dynamic panel system GMM estimator to alleviate endogeneity concerns we determine the effect of corporate board structure on the performance of a panel of 1265 Chinese firms listed on the Shanghai and Shenzhen stock exchanges from 2010 to 2016. We compare the dynamic system GMM estimator to some commonly used estimators; ordinary least squares (OLS), fixed effects (FE) and the dynamic OLS, and show that these estimates are biased due to endogeneity. The dynamic system GMM estimator incorporates the dynamic nature of internal governance choices to provide valid and powerful instruments that address unobserved heterogeneity and simultaneity. Our results show support for the board model corporate governance mechanism. We find that board size is positive and significantly related to both return on assets and total net profit margin. In addition board independence is positive and significantly related to return on assets but insignificantly related to total net profit margin. Duality was found to have a negative but statistically insignificant relation with firm performance.

Battery/Supercapacitor(SC) current tracking control is a key issue for hybrid energy storage system (HESS) in electric vehicles. An innovative passivity-based L2-gain adaptive control (PBL2AC) based on port-controlled Hamiltonian model with dissipativity (PCHD) for reference current tracking and bus voltage stability in HESS is presented. The developed PCHD model has considered both parameter variations and external disturbances. By using L2-gain disturbance attenuation, the PBL2AC ensures robust reference current tracking and stable bus voltage. Moreover, adaptive mechanism is adopted to estimate the electrical parameters. To validate the proposed control scheme for HESS, simulations and experiments were done and compared with traditional PID and sliding mode control under several typical driving cycles, and results show that the effectiveness of the proposed controller can be confirmed.

During the last decades, the production systems have developed different strategies to increase their competitiveness in the global market. In a manufacturing and services systems, Lean Manufacturing has been consolidated through the correct implementation of its tools. The present paper presents a case study developed in a Food Packer company where a Simulation Model was considered as an alternative to reduce the waste time generated by the poor distribution of operations and transportation areas for a product within the factory. As a matter of fact, the company has detected problems on the layout distribution that prevents to fulfill the market demand. In addition, the principal aim was to create a simulation model to test different hypothetical scenarios and alternative designs for the layout distribution without modifying its facilities. Moreover, the implemented methodology was based on classical models of simulation projects and a compendium of the manufacturing systems optimization by simulation process used during the last ten years. Also, a mathematic model supported by the Promodel ® simulation software was developed considering the company characteristics; along with the model development, it was possible to compare the production system performance from the percentage of used locations, the percentage of resources utilization, the number of finished products, and the level of Work in Process (WIP). Finally, the verification and validation stages were performed before running the scenarios in the real production area. The results generated by the implementation of the project represent an increase of 68% in the production capacity and a reduction of 5% in the WIP. In addition, both outcomes are associated with the resources management, which were reassigned to other production areas.

BACKGROUND G6PD deficiency is an inherited an X-linked recessive condition leading to insufficient levels of glucose-6-phosphate dehydrogenase, thus causing hemolytic anaemia under certain conditions. METHODS Our study is explorative for cases admitted to Jordan University Hospital. The studied parameters include demographics, clinical manifestations, biochemical markers including Hb level, WBC count, liver enzymes, and blood grouping. RESULTS Most of the patients were admitted to the emergency unit (53.13%). Individuals who were Rh-positive represented 57.81%, while patients of AB blood group accounted for 75%. The mean values were 4.81 years (age), 29.06 hours (time-to-hospital admission), 38.10 degree Celsius (temperature), 6.11 gm/dl (Hb), 13242.19 (WBC count), 343.20 U/L (S. ALP), and 50.98 IU/L (S. ALT). There was no significant difference between males and females or between favism-induced versus drug-induced hemolytic episodes. AB and Rh positive blood groups are of protective effect in relation to liver enzymes. Patients who were admitted to the hospital within 24 hours from having clinical manifestations had a better prognosis. CONCLUSION This study is the first inferential research on G6PD deficiency from the Middle East to explore cases from one of the largest healthcare centres in Jordan. The role of blood grouping should be investigated prospectively.

Tree condition, pruning and orchard management practices within intensive horticultural tree crop systems can be determined via measurements of tree structure. Multi-spectral imagery acquired from an unmanned aerial system (UAS) has been demonstrated as an accurate and efficient platform for measuring various tree structural attributes, but research in complex horticultural environments has been limited. This research established a methodology for accurately estimating tree crown height, extent, plant projective cover (PPC) and condition of avocado tree crops, from a UAS platform. Individual tree crowns were delineated using object-based image analysis. In comparison to field measured canopy heights, an image-derived canopy height model provided a coefficient of determination (R2) of 0.65 and relative root mean squared error of 6%. Tree crown length perpendicular to the hedgerow was accurately mapped. PPC was measured using spectral and textural image information and produced an R2 value of 0.62 against field data. A random forest classifier was applied to assign tree condition into four categories in accordance with industry standards, producing out-of-bag accuracies >96%. Our results demonstrate the potential of UAS-based mapping for the provision of information to support the horticulture industry and facilitate orchard-based assessment and management.

Zebrafish have been found to be the premier model organism in biological and biomedical research, specifically offering many advantages in developmental biology and genetics. This unique aquatic species has been found to have the capacity to regenerate their spinal cord after injury. However, the complete molecular and cellular mechanisms behind glial bridge formation in the central and peripheral nervous systems upon glial cell injury remains unclear. This review paper focuses on the molecular mechanisms and cellular processes that underlie spinal cord regeneration in four initial phases: proliferation and initial migration; migration and differentiation; glial bridge formation; and remodeling. We propose that within these four phases the cellular mechanisms that underlie spinal cord regeneration each express a terminating signal that aborts one step of the process and initiates the next. Specifically, future studies would be devoted to investigate transmitting signals in the spinal cord injury micro-environment in hope to contribute to the understanding of underlying cellular mechanisms by connecting each process of spinal cord regeneration in zebrafish.

Reactivation of pre-existing weaknesses in the upper crust can be documented using surface features, and has occurred throughout time and space, particularly in regions where the basement material dates from the Precambrian and has undergone successive deformation events. This study aims to use surface features such as fracture patterns to document evidence of such reactivation in the Paleozoic and Cenozoic of Nebraska and Kansas (units separated by an unconformity in the study area). The most prominent basement features in southeast Nebraska and northeast Kansas are oriented NE-SW, likely related to the midcontinent rift, and oriented NW-SE, likely related to fabrics from the Central Plains Orogen. These features are well defined in the potential fields data. Fracture patterns in the study area show an E-W oriented trend, as well as clearly discernable NE-SW and subsidiary N-S and NW-SE trends. The E-W trend is interpreted to be related to far-field stresses from Laramide and Ancestral Rocky Mountain orogenic events, whilst the NE-SW trend is interpreted to be related to subtle reactivation on the Mid-continent rift and related faults, observed in basement data. These movements produced stresses of sufficient magnitude to produce extensional fractures in the overlying rock units, but not sufficient to generate shear. Similarly, the ~N-S and NW-SE fracture trends are taken as evidence of subtle reactivation on the Nemaha Uplift and Central Plains Orogen systems, generating fractures but not shear movement. This contribution therefore provides a convincing case-study of the value of fracture orientations (that is, surface morphodynamics) in discerning buried tectonic trends and subtle reactivation thereon.

There has been rampant fold-ups, merger and acquisitions occurring in the Ghanaian banking industry. Then, the questions arise: Is the Ghanaian Financial System in Crisis? This study was conducted to find answers to these problems unsolved with prior literature. A sample of seventy customers of the Royal Bank, 8 employees of the Royal Bank and 2 managers of the Royal Bank were selected for a case-survey. The study also monitored the Trend of the Ghanaian Financial System through the reading and monitoring of daily news on the Financial System and reports of banks. The data from the field and the secondary data from news and reports were analysed symmetrically. The study drew on Minsky’s Financial Crisis Theory to explain the phenomenon in the Ghanaian economy and to draw predictions of what would happen in other developing economies. The study found out that: (1) The Ghanaian financial system is fragile and it holds true for most developing economies; (2) The financial system suffers greatly when the confidence level of customers falls significantly; (3) Management information systems raises the confidence level of customers (borrowers and lenders) such that there is a greater fall and impact in times of instability in the economy; (4) The higher the level of MIS adoption in an unstable economy, the more fragile the Financial System becomes and (5) A higher adoption of Management Information Systems in a Fragile Financial System indirectly contributes to Financial Crisis of the Financial System.

The tumor microenvironment is known to have increased levels of cytokines and metabolites, such as glutamate, due to their release from the surrounding cells. A normal cell around the tumor that responds to the inflammatory environment is likely to be subsequently altered. We will discuss how these abnormalities will support tumor survival via the actions of gap junctions (GJs) and hemichannels (HCs) which are composed of hexamer of connexin 43 (Cx43) protein. In particular, we will discuss how GJ intercellular communication (GJIC) in glioma cells, the primary brain tumor, is a regulatory factor and its attenuation leads to tumor invasion. In contrast, the astrocytes, which are normal cells around the glioma, are "hijacked" by tumor cells, either by receiving the transmission of malignant substances from the cancer cells via GJIC, or perhaps via astrocytic HC activity through the paracrine signaling which enable the delivery of these substances to the distal astrocytes. This astrocytic signaling would promote tumor expansion in the brain. In addition, brain metastasis from peripheral tissues has also been known to be facilitated by GJs formed between cerebral vascular endothelial cells and cancer cells. Astrocytes and microglia are generally thought to eliminate cancer cells at the blood brain barrier. In contrast, some reports suggest they facilitate tumor progression as tumor cells take advantage of the normal functions of astrocytes that support the survival of the neurons by exchanging nutrients and metabolites. In summary, GJIC is essential for the normal physiological function of growth and allowing the diffusion of physiological substances. Therefore, whether GJIC is cancer promoting or suppressing may be dependent by what permeates through GJs, when it is active, and to which cells. The nature of GJs, which has been ambiguous in brain tumor progression, will need to be re-visited and understood together with new findings on Cx proteins and HC activities.

To date, Cartesian (x, y, z) coordinate system (CCS) has been the default approach to geometrically specify atomic spatial positions in protein structures since the launch of Protein Data Bank (PDB) in 1971. To this end, this paper proposes a local spherical coordinate system (SCS) approach as an alternative to the default approach and a previously reported global SCS approach. The local SCS approach here requires only two parameters (θ and φ), instead of x, y and z as required by the default CCS approach. Essentially, CCS and SCS are like the two sides of one coin, i.e., geometric coordinate system for three-dimensional position specification. Therefore, this paper furthermore argues that it is time to flip the coin over, and have a look at the other side of the coin, e.g., the local SCS approach, which possesses an intrinsically lower degree of descriptional complexity than that of the default CCS approach, and constitutes a potentially useful alternative perspective for all protein structural research field.

This paper presents the robotic platform, PiBot, that has been developed and that is aimed at improving the teaching of Robotics with vision to secondary students. Its computational core is the Raspberry Pi 3 controller board, and the greatest novelty of this prototype is the support developed for the powerful camera mounted on board, the PiCamera. An open software infrastructure written in Python language was implemented so that the student may use this camera, or even a WebCam, as the main sensor of this robotic platform. Also, higher level commands have been provided to enhance the learning outcome for beginners. In addition, a PiBot 3D printable model and the counterpart for the Gazebo simulator were also developed and fully supported. They are publicly available so that students and educational centers that do not have the physical robot or can not afford the costs of these, can nevertheless practice and learn or teach Robotics using these open platforms: DIY-PiBot and/or simulated-PiBot.

Intradermal injection of botulinum neurotoxin is a frequently performed procedure in aesthetic dermatology to improve facial skin tone, texture, fine wrinkles, and enlarged pores. In practice, botulinum neurotoxin type A is also used to reduce skin oiliness of the face. There is increasing evidence that acetylcholine plays specific roles in sebum production, suggesting that botulinum neurotoxin type A may reduce sebum production by interfering with cholinergic transmission between sebaceous glands and autonomic nerve terminals. Botulinum neurotoxins can also inhibit several pathogenetic components of acne development, suggesting that botulinum neurotoxins can be used as a safe and effective treatment modality for acne and other skin disorders related to the overactivity of sebaceous glands. This review aims to explore the current evidence behind the treatment of oily skin and acne with botulinum neurotoxin type A.

This paper proposes a hybrid medium access control (MAC) protocol for wireless sensor network (WSN) data gathering, employing unmanned aerial vehicles (UAV). The UAV sends a beacon frame periodically to inform sensor nodes regarding its presence. Afterward, each sensor node which receives beacon frame contends to send registration frame to the UAV. The UAV will transmit the second beacon frame to the registered nodes to notify their transmission schedule. The time-slot scheme is used for the transmission schedule. The transmission schedule of each sensor is determined based on their priority. Specifically, the priority of each sensor is determined during the registration process. Furthermore, the architecture of UAV-WSN data gathering system is introduced in this paper. Simulations are performed, showing that the proposed MAC protocol achieves fairness while enhancing network performance.

The concept of geostationary VHTS (Very High Throughput Satellites) is based on multibeam coverage with intensive frequency and polarization reuse in addition to the use of larger bandwidths in the feeder links, in order to provide high capacity satellite links at a reduced cost per Gbps in orbit. The dimensioning and design of satellite networks based on VHTS imposes the analysis of multiple trade-offs to achieve an optimal solution in terms of cost, capacity and figure of merit of the user terminal. In this paper, we propose a new method for sizing VHTS satellite networks based on an analytical expression of the forward link CINR (Carrier-to-Interference-plus-Noise Ratio) that is used to evaluate the trade-off of different combinations of system parameters. The proposed method considers both technical and commercial requirements as inputs including the constraints to achieve the optimum solution in terms of the user G/T, the number of beams and the system cost. The cost model includes both satellite and ground segments. Exemplary results are presented with feeder links using Q/V bands, DVB-S2X and transmission methods based on CCM and VCM (Constant and Variable Coding and Modulation, respectively) in two scenarios with different service areas.

Defensive behavior is a function of specific survival circuits, the “aversive brain system”, that are thought to be conserved across vertebrates, and involve threat detection and the organization of defensive responses to reduce or eliminate threat. In mammals, these circuits involve amygdalar and hypothalamic subnuclei and midbrain circuits. The increased interest in teleost fishes as model organisms in neuroscience created a demand to understand which brain circuits are involved in defensive behavior. Telencephalic and habenular circuits represent a “forebrain circuit” for threat processing and organization of responses, being important to mounting appropriate coping responses. Specific hypothalamic circuits organize neuroendocrine and neurovegetative outputs, but are the less well-studied in fish. A “midbrain circuit” is represented by projections to interneurons in the optic tectum which mediate fast escape responses via projections to the central gray and/or the brainstem escape network. Threatening stimuli (especially visual stimuli) can bypass the “high road” and directly activate this system, initiating escape responses. Increased attention to these circuits in an evolutionary framework is still needed.

Flood is identified as one of the major disasters in the world; it destroys both human and properties across the world, where lives are lost, properties, public infrastructure, farmlands and agricultural produce with farm crops carted away as a result of flood disaster. Studies revealed that the flood in itself is not the danger, but the level of human vulnerability to flooding disaster risk, which enhances its destructive capabilities. However, based on the challenges poses by flood disaster risk, this research identifies Ala river in Akure as a potential cause of flood, considering its location and other human activities around the river. Therefore, the research used Ala-river a case study to identify and mapped out areas susceptible to flood disaster risk. The research made use of both literature review and conducted goe-data gathering with the application GIS-computer database to retrieve georeferencing relevant data from the fieldwork in the study area of Ala-river basin to mapped out locations vulnerable to achieve the research aim. The research adopted a Geo-mapping of the vulnerable area to Ala-River basin using arc-GIS tool in combination with other software such as IKONAS and OLI (Operation Land Imager) for the production of the study area imagery, ER-ITERIM was used for the collection of rainfall data and FAO was applied for digital soil mapping. These applications produced; the land use/land cover map, digital elevation map, buffer map using 30 meters setback, annual rainfall map, soil types map, vulnerability map and soil textural table for the study area. Analysis of the produced and generated maps shows 316 buildings vulnerability to flood disaster risk; the soil texture and types, and alternative use to which the soil types can be useful. The research recommends that demolition of the identified 316 buildings prone to flood disaster and compliance of building construction to 30 meters setback by developers. Others are the conversion of the future land setback for urban agricultural purposes and preservation of water retention areas for agricultural activities during the dry season among others. The study concludes that relevant government agencies in the State and in particular in Akure South Local Government should ensure prompt compliance and implementation of the recommendations to avoid potential flood disaster risks.

Water quality monitoring was an important objective in the surroundings. In this study, we investigated the sensing characteristics of the arrayed flexible chloride sensor with XBee wireless sensing system. The sensitivity and linearity of the wireless chloride sensing devices were 91.6 mV/pCl and 0.988, respectively. The hysteresis voltages were 50.14 mV and 36.71 mV during the cycles of 1 M → 10⁻¹ M → 1 M → 10⁻³ M → 1 M and 1 M → 10⁻³ M → 1 M → 10⁻¹ M → 1 M, respectively. The selectivity coefficients of the ClO⁻ ion, ClO₄⁻ ion, NO₃⁻ ion and I⁻ ion for Cl⁻ ion were 5.0 × 10⁻², 1.0 × 10⁻¹, 5.9 × 10⁻³ and 5.6×10⁻¹, respectively. The sensing characteristics of real time measurement were investigated for dynamic microfluidic. The arrayed flexible chloride sensor was integrated with the microfluidic device, syringe pump and wireless sensing system. The sensitivity and linearity were 273.1 mV/pCl and 0.978 at 35 μL/min, respectively.

In this work, an algorithm for the scheduling of household appliances to reduce the energy cost and the peak-power consumption is proposed. The system architecture of a home energy management system (HEMS) is presented to operate the appliances. The dynamics of thermal and non-thermal appliances is represented into state-space model to formulate the scheduling task into a mixed-integer-linear-programming (MILP) optimization problem. Model predictive control (MPC) strategy is used to operate the appliances in real-time. The HEMS schedules the appliances in a dynamic manner without any a priori knowledge of the load-consumption pattern. At the same time, HEMS responds to the real-time electricity market and the external environmental conditions (solar radiation, ambient temperature etc). Simulation results exhibit the benefits of proposed HEMS by showing the reduction of up to 47% in electricity cost and up to 48% in peak power consumption.

Objective: On March 11, 2020 the WHO declared that COVID-19 is pandemic. Among the risk factors for many infectious diseases, a role of the ABO blood group system is reported in the literature. We argue whether it is necessary to investigate the relationship between ABO blood groups and susceptibility to SARS-CoV-2 infection and if we should consider some blood groups as potential risk factors for COVID-19. Results: Based on the scientific evidence reported in this letter, we believe that further studies are needed to investigate how the ABO polymorphism influences the host susceptibility, individual response and clinical risk for SARS-CoV-2 infection.

Declining water supply is the main cause of rising water fee for agricultural use. Moreover, in non-technical irrigation, poor irrigation infrastructure exacerbates water scarcity. Thus, the purpose of this study is to identify farmer willingness to pay for non-technical irrigation and its determinants. Structured questionnaire was used to collect data from 100 farmers. Contingent valuation method was employed to elicit farmer WTP and multiple linear regression was used to find its determinants. The result shows that farmer average WTP is Rp 3,055,168 /ha/year. It accounts for 20 percent of total farmer revenue and almost 20 times fee for technical irrigation. Economic and technical variables are the significant determinants of WTP while social variables seem insignificant to WTP. This result indicates high economic value of water, and to improve irrigation management we recommend establishing irrigation infrastructure gradually by mobilizing farmer resources (capital and management) and strengthening WUA.

This paper presents a study on the thermal efficiency improvement of the user equipment room in the district heating system based on reinforcement learning [1], and suggests a general method of constructing a learning network(DQN)[2] using deep Q learning[3], which is a reinforcement learning algorithm that does not specify a model. In addition, we introduce the big data platform system and the integrated heat management system for the energy field in the massive data processing from the IoT sensor installed in large number of thermal energy control facilities.

In this paper we propose a novel theoretical framework, which was previously developed for major depression and bipolar disorder, namely the compensatory immune-regulatory reflex system (CIRS), as applied to the neuro-immune pathophysiology of schizophrenia and its phenotypes, including first episode psychosis (FEP), acute relapses, chronic and treatment resistant schizophrenia (TRS), comorbid depression, and deficit schizophrenia. These schizophrenia phenotypes and manifestations are accompanied by increased production of positive acute phase proteins, including haptoglobin and α2-macroglobulin, complement factors, and macrophagic M1 (IL-1β, IL-6 and TNF-α), T helper (Th)-1 (interferon-γ and IL-2R), Th-2 (IL-4, IL-5), Th-17 (IL-17) and T regulatory (Treg; IL-10 and transforming growth factor (TGF)-β1) cytokines, cytokine-induced activation of the tryptophan catabolite (TRYCAT) pathway as well as chemokines, including CCL-11 (eotaxin), CCL-2, CCL-3 and CXCL-8. While the immune profiles in the different schizophrenia phenotypes indicate activation of the immune-inflammatory response system (IRS), there are simultaneous signs of CIRS activation, including increased levels of the IL-1 receptor antagonist (sIL-1RA), sIL-2R and tumor necrosis factor-a receptors, Th-2 and Treg phenotypes with increased IL-4 and IL-10 production, and increased levels of TRYCATs and haptoglobin, α2-macroglobulin and other acute phase reactants, which have immune-regulatory and anti-inflammatory effects. Signs of activated IRS and CIRS pathways are also detected in TRS, chronic and deficit schizophrenia indicating that these conditions are accompanied by a new homeostatic setpoint between upregulated IRS and CIRS components. In FEP, increased baseline CIRS activity is a protective factor which may predict favorable clinical outcomes. Moreover, impairments in the CIRS are associated with deficit schizophrenia and greater impairments in semantic and episodic memory. It is concluded that CIRS plays a key role in the pathophysiology of schizophrenia by negatively regulating the primary IRS and contributing to recovery from the acute phase of illness. Components of the CIRS may offer promising therapeutic targets for schizophrenia.

The health of the landing gear retraction and extension hydraulic system may be assessed using fuzzy comprehensive evaluation (FCE), however the traditional FCE method depends solely on human assessment by specialists, which is excessively subjective. To address the issue of excessive human subjective variables in the assessment, an improved FCE model based on enhanced risk coefficient is provided, which includes four consideration indexes: failure probability, failure severity, failure detection difficulty, and failure repair difficulty. To reduce subjective human judgment errors entirely due to expert experience, the improved FCE takes into account the likelihood of failure using a statistical method, the severity of failure using a fault simulation analysis based on the LMS Imagine.Lab AMESim simulation platform, and the difficulty of fault detection and repair using the aircraft manufacturer's professional maintenance information. As part of the evaluation model, the range of health assessment values and accompanying treatment methods are included, making it easier to implement on a daily basis in aircraft maintenance. As a final step, the simulation is evaluated and the simulated faults are calculated.

This paper is regarding design and program an Micro-controller Arduino Uno board by using Arduino software to work as a photo-sensor(Active) single axial solar tracker system(SASTS). A solar panel, two photo-resistors (LDR) in two sides (north/south) of the photo-voltaic(PV) and a servo motor are connected to the Uno board, which is running a code that prepared by Arduino software IDE in advanced then it works as a tracking system. Here, the LDRs send the signal of presence or absence of the light to the board and based on that sent signal the Uno reflects a new signal to the servo motor to rotate and finds the light source. Lastly, the photo-sensor single axis tracker is made while Continuously, the system tries to face the panel to the sun and whilst changing the irradiance intensity it starts searching to find the angle of highest irradiance. Based on results that are extracted from the data, the tracker system significantly boosts the output efficiency of the solar panel. By using the Micro-controller Uno board, LDRs, servo motor and special designed mechanical base, the tracking system is constructed, based on acquired data the influence of the STS on the increasing the solar panel efficiency is more obvious. Significantly, the tracker system rises the efficiency of the PV .

Increasing demand for electricity and modernization of power systems within competitive markets induce power systems to operate close to their stability limits. Therefore, a power system continuous monitoring and control by using voltage stability indices are known exigence. This is the first-ever effort, examined more than 40 voltage stability indices thorough an exhaustive study based in on their formulation, application, performance, and assessment measures. Which is conducted based on a logical and chronological order considering the most recent worldwide applied voltage stability indices. However, the generalizability of such an immense diversity of these indices in term of multivariable objectives subjects to a certain limitation to summate into a deciphered outcome. Despite all these obstacles, this study systematically reviews available indices in the literature within the past three decades to set out an integrated knowledge with an insight up-to-date exposition. That followed with a comparative analysis in term of their similarity, functionality, applicability, formulation, merit, demerit, and overall performances. Also, a broad categorization of voltage stability indices is addressed. This study with an immediate implication in practice as an exhaustive roadmap can be counted a planning and operation reference in the context of voltage stability for students, researchers, scholars, and practitioners.

Mixing is considered as a critical process parameter (CPP) during process development due to its significant influence on reaction selectivity and process safety. Nevertheless, mixing issues are difficult to identify and solve owing to their complexity and dependence on knowledge of kinetics and hydrodynamics. In this paper, we proposed an optimization methodology using Computational Fluid Dynamics (CFD) based compartmental modelling to improve mixing and reaction selectivity. More importantly, we have demonstrated that through the implementation of surrogate-based optimization, the proposed methodology can be used as a computationally non-intensive way for rapid process development of reaction unit operations. For illustration purpose, reaction selectivity of a process with Bourne competitive reaction network is discussed. Results demonstrate that we can improve reaction selectivity by dynamically controlling rates and locations of feeding in the reactor. The proposed methodology incorporates mechanistic understanding of the reaction kinetics together with an efficient optimization algorithm to determine the optimal process operation and thus can serve as a tool for quality-by-design (QbD) during product development stage.

Information is the currency of life, but the origin of prebiotic information remains a mystery. We propose transitional pathways from the cosmic building blocks of life to the complex prebiotic organic chemistry that led to the origin of information systems. The prebiotic information system, specifically the genetic code, is segregated, linear, and digital and probably appeared during biogenesis four billion years ago. In the peptide/RNA world, lipid membranes randomly encapsulated amino acids, RNA, and protein molecules, drawn from the prebiotic soup, to initiate a molecular symbiosis inside the protocells. This endosymbiosis led to the hierarchical emergence of several requisite components of the translation machine: tRNAs, aaRS, mRNAs, and ribosomes. When assembled in the right order, the translation machine created biosynthetic polypeptides, a process that transferred information from mRNAs to proteins. This was the beginning of the prebiotic information age. The molecular attraction between tRNA and amino acids led to different stages of the translation machines and the genetic code. tRNA is an ancient molecule that designed and built mRNA for storing the information of its cognate amino acid. Each mRNA strand became the storage device for the genetic information that encoded the amino acid sequences in triplet nucleotides. As information appeared in the digital languages of the codon within mRNA, and the genetic code for protein synthesis evolved, the prebiotic chemistry then became more organized and directional. The origin of the genetic code is enigmatic; herein we propose an evolutionary explanation: the demand for a wide range of specific enzymes in the peptide/RNA world was the main selective pressure for the origin of information-directed protein synthesis. We review three main concepts on the origin and evolution of the genetic code: the stereochemical theory, the coevolution theory, and the adaptive theory. These three theories are compatible with our coevolution model of the translation machines and the genetic code. We suggest biosynthetic pathways as the origin of the specific translation machines which provided the framework for the origin of the genetic code. During translation, the genetic code developed in three stages coincident with the refinement of the translation machines: GNC code developed by the pre-tRNA/pre-aaRS /pre-mRNA machine, SNS code by the tRNA/aaRS/mRNA machine, and finally the universal genetic code by the tRNA/aaRS/mRNA/ribosome machine. Our hypothesis provides the logical and incremental steps for the origin of the programmed protein synthesis. In order to understand the prebiotic information system better, we converted letter codons into numerical codons in the Universal Genetic Code Table. We have developed a software called CATI (Codon-Amino Acid-Translator-Imitator) to translate randomly chosen numerical codons into corresponding amino acids and vice versa. This conversion has granted us insight into how the translation might have worked in the peptide/RNA world. There is great potential in the application of numerical codons to bioinformatics such as barcoding, DNA mining, or DNA fingerprinting. We constructed the likely biochemical pathways for the origin of translation and the genetic code using the Model-View-Controller (MVC) software framework, and the translation machinery step-by-step. Using AnyLogic software we were able to simulate and visualize the entire evolution of the translation machines and the genetic code. The results indicate that the emergence of the information age from the peptide/RNA world was a watershed event in the origin of life about four billion years ago.