We explored the dynamics of the two interacting information systems. We show that for the Markovian marginal systems the driving force for information dynamics is determined by both the information landscape and information flux. While the information landscape can be used to construct the driving force to describe the equilibrium time reversible information system dynamics, the information flux can be used to describe the nonequilibrium time-irreversible behaviours of the information system dynamics. The information flux explicitly breaks the detailed balance and is a direct measure of the degree of the nonequilibriumness or time irreversibility. We further demonstrate that the mutual information rate between the two subsystems can be decomposed into the equilibrium time-reversible and nonequilibrium time-irreversible parts respectively. This decomposition of the mutual information rate (MIR) corresponds to the information landscape-flux decomposition explicitly when the two subsystems behave as Markov chains. Finally, we uncover the intimate relationship between the nonequilibrium thermodynamics in terms of the entropy production rates and the time-irreversible part of the mutual information rate. We found that this relationship and MIR decomposition still hold for the more general stationary and ergodic cases. We demonstrate the above features with two examples of the bivariate Markov chains.

In the absence of a holistic view of Landscape Sustainability, credible data and consistent information are needed to help decision making and support adaptive management. However, consolidated tools (system of standards and controls) of assessment exist, but show a complexity of the references on one hand, and are mostly qualitative and environmental indicators based on the other hand. This review article deals with the theme of both environmental and landscape indicators in general, the principles and the fundamental definitions. The main models used, the prerequisites and various fields of application are also taken into consideration. Last but not least, various environmental and landscape indicators are presented and compared.

One of the most problematic forms of nature protection in Poland relates to landscape parks. On the one hand, they include the most valuable landscapes; on the other hand, the areas within the landscape park still have economic uses. Therefore, the monitoring of landscape changes within landscape parks is necessary in order to properly manage these forms of protection. The main objective of the study was to monitor the scale and nature of landscape transformations within the boundaries of landscape parks in Poland during the period 2000–2018 and to assess the possibility of using the landscape change index (LCI) to monitor the intensity of landscape transformations within this type of protected area. Filling a gap in the research on landscape changes, I developed and verified the possibility of using LCI for monitoring the intensity of landscape changes using the example of 12 landscape parks in the Lower Silesia region. Preliminary analyses of the transformations within all landscape parks in Poland showed an upward trend, both in terms of the number of types of identified landscape changes as well as their area. In spite of the large diversity and degree of transformation in landscape parks, several dominant processes can be observed. The largest number and area of changes during each of the analyzed periods were found in transformations within forest landscapes (temporary and permanent deforestation and forest maturation), which constitute the dominant type of land cover within most of the landscape parks. In open landscapes, changes mainly relate to afforestation and natural succession in meadows, pastures and arable land, as well as the transformation of arable land into mining areas. Twelve case studies, covering all landscape parks of the Lower Silesia, have shown that the LCI is an excellent tool for monitoring the intensity of landscape changes, but it is dependent on the accuracy of the source data. The analyses confirmed that, during the study periods, the changes in all 12 Lower Silesian landscape parks were at a low level, but their particular intensification took place in the years 2012–2018. The highest LCI was found in the area where a natural disaster had occurred (air tornado), which destroyed huge areas of forest in landscape parks. After changes in the forest landscape, the most frequently identified type of change in 2006–2012 is the transformation of non-forest landscapes into forest landscapes. The main reason for such changes was the expansion of forest into abandoned arable land, meadows and pastures. The use of the Corine Land Cover database to calculate LCI and monitor the intensity of landscape change revealed a low usability of the database for the year 2000 and a high usability for data from 2006–2018.

The landscape image is the bridge of communication between people and forests, and the cut point of the supply-side reform of forest tourism products. The research collected 140 copies in total of forest landscape image drawings from non-art-major graduate students by randomly sampling during April and May, 2018, and constructed the landscape image conceptual model of forest by utilizing the landscape image sketching technique. The results showed that (1) In regard to linguistic knowledge, the natural landscape elements for instance, herbaceous plants, terrains, creatures, water and sky, and the broad-leaf forest objectively reflected not only the real forest landscape and the local native vegetation, but the variation of forest species with little attention. (2) On the perspective of spatial view, the sideways view indicated that graduate students preferred to watch forests at a moderate distance externally and few looked at forests internally. (3) In the view of self-orientation, the objective landscape indicated that graduate students preferred to demonstrate forest landscapes, they did not realize to interact with the environment. (4) On the aspect of social meaning, the scenic view and forest structure stated that graduate students preferred rural forest landscapes, not significantly for other special interests for forest. In conclusions, (1) the forest is thought to be a feature of people's life world and of rural scenes around homes, not an objective perception of the forest. (2) The forest is regarded as an important habitat for animals and a limited resource for people's life, production and recreation needs, into which people will go only to meet such needs. (3) The natural values of forests, like the ecology and aesthetics, etc. get more attention, while the social values of forests, like the life, production and culture receives rather low attention.

Abstract: Changes in forest landscapes have been connected with human activity for centuries, which can be considered as one of the main driving forces of change in the global perspective. The spatial distribution of forests changes along with the geopolitical situation, demographic changes, intensification of agriculture, urbanization or changes in the land use policy. However, due to the limited availability of historical data, the driving forces of changes in forest landscapes are most often considered in relation to recent decades, without taking into account long-term analyzes. The aim of this paper is to determine the impact of natural and socio-economic factors on changes in forest landscapes within the protected area – Ślęża Landscape Park and its buffer zone in the aspect of long-term analyzes covering the period of 140 years (1883-2013). The comparison of historical and current maps, demographic data on 4 different periods as well as natural and location factors by using the ArcGIS software allowed analyzing selected driving forces of forest landscape transformations. We took into account natural factors like altitude, slope, exposure of the hillside and socio-economic drivers like population changes, distances to centers of municipalities, main roads and built-up areas.

Two beneficial characteristics of aircraft generators are having armature windings and PM excitation sources placed on the stator side (maintenance and thermal management) and having a clear-cut rotor without permanent magnets or excitation windings (vulnerable at high speeds due to associated centripetal mechanical stresses). Within this framework, a doubly-salient permanent magnet (DSPM) generator was conceived by optimizing the stator size and rotor structure to minimize the torque ripple and maximize the RMS voltage value per turn of each generator phase. A Multi-Objective Design Strategy based on a 2D finite element analysis was used, being set to have characteristics closest to optimal for a Boeing 767 turbine, that is, the necessary electromotive force for a required power of 90 kW at 3000 rpm, feeding a simplified Boeing 767 electrical power distribution system. The results show that the machine could not deliver the required power at 3000 rpm since the 2D finite elements analysis demonstrates that the 2D model gives optimistic results when compared with the 3D FEM model. However, with a 3D finite element analysis of the machine feeding the aircraft load, it was seen that the machine’s efficiency is 92%, suggesting this machine can be a plausible solution.

The rural road landscape is crucial in forming rural areas' landscape character (LC). As a platform for portraying the rural landscape, the rural roads demonstrate the area's unique natural and cultural characteristics to the visitors. However, with the continuous development of rural areas, the rural LC has been severely impacted, thus impacting visitors' visual experience. In order to preserve and protect the rural landscape, this study aims to assess the visual quality of rural road landscapes based on public preference and heatmap analysis. The results indicated that most of the participants had a higher level of preference for rural landscapes with open horizontal views represented by agricultural areas such as paddy fields. It was also found that different paddy field characters based on their planting stages can also positively affect the visual quality of rural road landscapes. The study also revealed that rural LCs with roadside settlements, commercial structures, mixed agricultural crops, and vegetation received low preference ratings. These characters negatively impact the visual quality of the rural road landscape. These findings provide significant insight for planners and decision-makers regarding protecting and preserving the essential rural road landscapes for the rural tourism experience.

Novel cultivation technologies demand the adaptation of existing analytical concepts. Metabolic flux analysis (MFA) requires stable-isotope labeling of biomass-bound protein as the primary information source. Obtaining the required protein in cultivation set-ups where biomass is scarce or inaccessible due to low cell densities and cell immobilization is difficult to date. We developed a non-disruptive analytical concept for 13C-based metabolic flux analysis based on secreted protein as an information carrier for isotope mapping in the protein-bound amino acids. This "metabolic flux probe" (MFP) concept was investigated in different cultivation set-ups with a recombinant, protein-secreting yeast strain. The obtained results grant insight into intracellular protein turnover dynamics. Experiments under metabolic but isotopically nonstationary conditions in continuous glucose-limited chemostats at high dilution rates demonstrated faster incorporation of isotope information from labeled glucose into the recombinant reporter protein than in biomass-bound protein. Our results suggest that the reporter protein was polymerized from intracellular amino acid pools with higher turnover rates than biomass-bound protein. The latter aspect might be vital for 13C-flux analyses under isotopically nonstationary conditions for analyzing fast metabolic dynamics.

Regarding landscape preferences for highways, there is a dynamic interaction between users and the variety of natural and cultural landscape elements along the roadside, reflecting a balance between the highway and the natural environment. However, the rapid pace of urbanization has accelerated the development of highways, leading to the neglect or destruction of valuable landscapes. This highlights the need for visual preference assessments to protect aesthetic and environmental values. Currently, there is a lack of comprehensive criteria for assessing the visual preference of highway landscapes. Therefore, this study aims to review existing literature and establish complete assessment criteria. This study conducted a systematic literature review by searching for keywords in three databases: Web of Science, Scopus, and Google Scholar. The review included 22 papers published between 2013 and 2023 that met the criteria. An additional four relevant papers were included through a “snowballing” approach to supplement the research and results. The results of the study focused on the relationships between highway landscapes and users, user preferences, preference methods, and related variables. These inter-established relationships were used to complete an assessment framework, which establishes a basic reference standard for professionals.

The dynamic resistance is an important parameter in flux pumping. It is simple to calculate in slab geometry but more complex in tapes. In this paper another simple geometry is analysed which is a wire loop. To do this it is essential to make clear what is meant by the term 'voltage', which is ambiguous when there are alternating magnetic fields present. The term can be used if it refers to the EMF along a specified path. However this means that results are dependent on how the voltage leads are attached. If the n value of the V-I characteristic is large simple analytic expressions can be obtained. This will be referred to as the 'Bean' model solution. A more exact approach uses Faraday's law to derive a differential equation which is solved and compared with the Bean model. The dynamic resistance of the loop can be used to drive a flux pump of the type proposed by Geng and Coombs [4] and again simple expressions can be obtained for the performance. If the load is of high inductance L2 and the loop has an inductance L1 then the load current increases exponentially with a characteristic number of cycles L2/L1. The final current can be close to the critical value.

The concept of transformative resilience emerges from complex recent literature and represents a way to interpret the potential opportunities to change in vulnerable territories, where a socio-economic change is required. This article extends the perspective of transformative resilience to assessing of the landscape multi-functionality of inland areas, exploring the potentials to identify a network of synergies among the different municipalities able to trigger a process of territorial resilience. A Spatial Decision Support System (SDSS) for multi-functionality landscape assessment aims to support the local actors to understand local resources and multi-functional values of the Partenio Regional Park (PRP) and surrounding municipalities, in the South of Italy, stimulating their cooperation to the management of environmental and cultural sites and the co-design of new strategies of enhancement.

The change of habitat pattern is one of the key factors affecting the survival of moose population. The study of habitat landscape pattern is the key to protect Chinese cold temperate forest moose population and monitor the global distribution of moose. By means of MaxEnt model, landscape index calculation and ecological risk assessment model, combined with field survey and infrared camera monitoring data from April 2014 to January 2023, the author evaluated the habitat suitability of moose population in Nanwenghe National Nature Reserve of the Great Khingan Mountains, and divided the range of moose habitat based on the logical threshold of the model. The landscape pattern index of moose habitat was calculated by Fragstats software and a landscape ecological risk assessment model was established to analyze the landscape pattern and ecological risk dynamic changes of moose habitat in 2015 and 2020. The results showed that under the premise of global warming, the habitat landscape contagion index decreased by 4.53 and the split index increased by 4.86 from 2015 to 2020. In terms of ecological risk: the area of low ecological risk areas increased by 0.88%; the area of medium ecological risk areas decreased by 1.11%; and the area of higher ecological risk areas increased by 0.23%. The fragmentation risk of landscape pattern of moose habitat tends to increase, the preferred patch type is dispersed, the degree of aggregation is low, and the risk of patch type transformation increases. And the middle and high ecological risk areas are mainly concentrated in the river area and its nearby forests, showing a fine and scattered distribution. Under the interference of global warming and human activities, the fragmenta-tion trend of moose habitat in the study area is increasing, and the habitat quality is declining, which is likely to cause moose population migration. For this reason, the author believes that the whole cold temperate forest is likely to face the risk of increasing the transformation trend of dominant patch types in the cold temperate coniferous forest region mainly caused by global warming, resulting in an in-crease in the risk of habitat fragmentation. While the distribution range of moose is reduced, it has a significant impact on the diversity and ecological integrity of the whole cold temperate forest ecosystem. This study is helpful for human beings to strengthen their awareness of forest and river protection, avoid further intervention in more human activities, and formulate a reasonable plan for forest protec-tion and sustainable development in cold temperate zones. to provide theoretical reference for effective monitoring and protection of cold temperate forest and moose population dynamics.

The article studies the Venetsiansky (Hydropark) Island (the Dnipro River, Kyiv, Ukraine) landscape structure applying the genetic landscape science method and the European landscape classification (LANMAP) approach. The aim of the article is to determine the best way to study the river islands landscapes analyzing the Venetsiansky Island landscape structure by the both methods. Methodology. The genetic landscape science method consists in the next steps: 1) the island’s territory information collecting; 2) the preliminary landscape map creating; 3) field study; 4) the final landscape map creating. The LANMAP method consists on: 1) the climate study; 2) the altitude study; 3) the parent material study; 4) the land cover study. The results. The genetic landscape science method demonstrates that the Venetsiansky Island is not a landscape, but a structural part of the landscape – the tract. The LANMAP study reveals that the Venetsiansky Island is naturally homogeneous, but land cover differs. The conclusion. The both methods’ study shows that the river island cannot be the entire landscape by the natural criteria, but only the part of it. The genetic landscape science explores the landscape forming while the LANMAP reveals the current state of the landscape.

By making periodic thru-holes in a suspended film, the phonon system can be modified. Motivated by the BCS theory, the technique -- so-called phonon engineering -- was applied to a metallic niobium sheet. It was found that its electrical resistance dropped to zero at 175 K, and the zero-resistance state persisted up to 290 K in the subsequent warming process. Despite the initial motivation, neither these high transition temperatures nor the phase transition with thermal hysteresis can be accounted for by the BCS theory. Therefore, we abandon the BCS theory. Instead, it turns out that the metallic holey sheet is partly oxidized to form a niobium-oxygen square lattice, which has points of resemblance to a copper-oxygen plane, the fundamental component of cuprate high-T_c superconductors. Therefore, the pairing mechanism underlying this study should be related to that of cuprate high-T_c superconductors, which we may not yet understand. In addition to the electrical results of zero resistance, the holey sheet exhibited a decrease in magnetization upon cooling, i.e., the Meissner effect. Moreover, the remnant magnetization was clearly detected at 300 K, which can only be attributed to persistent currents flowing in a superconducting sample. Thus, this study meets the established criteria for a conclusive demonstration of true superconductivity. Finally, the superconducting transition with the unambiguous thermal hysteresis is discussed. According to Halperin, Lubensky, and Ma, or HLM for short, any superconducting transition must always be first order with thermal hysteresis because of the intrinsic fluctuating magnetic field. The HLM theory is very compatible with the highly oriented system harboring two-dimensional superconductivity.

This paper aims to present the method of producing visual media for communicating the Asinara Island National Park plan. These products are landscape visualizations able to foster landscape preservation both from the point of view of the management of the landscape and of the citizen's involvement in the communication of the historical and environmental values of the landscape. Starting from landscape information gathering, the research has experimented with an operative method for processing different graphic representations from the same geographic database, calibrating the outputs to different audiences, their needs, objectives, and literacy skills. Three different types of products are presented: the first is a digital, dynamic and multisectoral decision-making GIS tool for park management. The second is a 3D model, aimed to the virtual fruition. The third is a map of the zoning park plan drawn to be easily readable to the non-expert public. This case study emerges as a replicable method to process the landscape information to make different visualization tools from a single geographic model, to meet the different requirements that arise from a complex landscape planning process.

As the necessity for safety and aesthetic of nightscape have arisen, the importance of nightscapes (i.e., nighttime landscape) planning has garnered the attention of mainstream consciousness. Therefore, this study is to suggest the guideline for nightscape planning using electroencephalography (EEG) technology and survey for recognizing the characteristics of a nightscape. Furthermore, we verified the EEG method as a tool for landscape evaluation. This study analyzed the change of relative alpha power and relative beta power and self-reporting of participants in order to investigate the correlation between EEG and fear according to twelve nightscape settings. Our findings indicated the corresponding measures of fear vary accordance with whether there was people or not, and the environmental settings (Built Nightscape Images; BNI vs Natural Nightscape Images; NNI). Based on our physiological EEG experiment, we provided a new analytic view of the nightscape. The approach we utilized enables a deeper understanding of emotional perception and fear among human subjects by identifying the physical environment which impacts how they experience nightscapes.

Ecosystemic services are those that provide material or immaterial benefits to the inhabitants of a landscape from its water, food, medicines and raw materials. They are classified into four types: provisioning, regulating, supporting and cultural. The latter can be defined as those non-material benefits that humans obtain through ecosystems. They include educational value, cultural diversity, sources of inspiration, spirituality and religious values, aesthetic value, social relations, rootedness or belonging, cultural heritage, recreational and ecotourism services, and scientific knowledge, among others. Characterising such diverse factors requires a systematisation in study facets for their management. We propose three: memory, image and socio-system, as differentiated spheres of approach to the urban landscape. The memory facet would include the ecosystemic services of belonging, cultural heritage and, in certain themes, cultural diversity, sources of inspiration and religious values. The image facet includes the aesthetic value and perceptual aspects of ecotourism. In the socio-system we would study the educational value, scientific knowledge and recreational or spirituality services, reflected in the endowments; but also social relations, rootedness and another vision of ecotourism.

Development and engineering of protein crystals regarding mechanical stability and crystallizability occurs on a small scale. Later in the process chain of industrial production however, filtration properties are important to separate the crystals from mother liquor. Many protein crystals are sensitive to mechanical stress which is why it is important to know the filtration behavior early on. In this study we analyze settling and filtration behavior of isometric, rod-like and needle shaped lysozyme and rod-like alcohol dehydrogenase (ADH) crystals on a small scale using an optical analytical centrifuge. Needle shaped lysozyme and rod-like ADH crystals show compressible material behavior. With the results from settling and filtration experiments the flux density function is calculated and modeled which can be used to describe the whole settling and permeation process in dependency of the solids volume fraction. This is also an issue for simulations of industrial processes.

The development of a decision framework for landscape governance and management has become one of the prioritised policy instruments for actualising policy objectives relating to agri-food system, biodiversity conservation, nature restoration, environmental management, climate change mitigation and adaptation, net zero greenhouse gas emissions, and the transition to renewable energy supplies in the United Kingdom (UK). However, the landscape lens in policy-making is challenging because of the diverse landscape archetypes, environmental problems, and diverging policy targets that it must address. This highlights the importance of having a robust, evidence-based landscape decisions framework. To address this issue, this study undertakes a systematic review and transdisciplinary synthesis of research outputs from the Landscape Decisions Programme (LDP). This study compiles and synthesizes outputs from the LDP projects in the context of the relevant literature to develop an understanding of the relationships among the emerging evidence with respect to decision-making for more sustainable and multifunctional landscapes. The synthesis analyzed the drivers of landscape decisions, and methodological approaches used to generate evidence for decision-making. The emerging themes from the synthesis were distilled into five principles that can be used as a basis for a roadmap towards the development of a holistic landscape decisions framework.

Despite the abundance of tree diversity in the natural world, and generally high tree species richness in urban areas, urban forests continue to be dominated by a limited number of species. As socio-ecological systems, urban forests are shaped by historical and current management efforts and decision-making of a wide range of human actors. Drawing on past research, we offer a conceptual framework for describing the complex interactions among tree producers and consumers as trees are selected, grown, specified, and planted in private and public urban areas. We illustrate how multiple layers of selection criteria filter down the entirety of potential local tree diversity to a handful of commonly used and accepted tree species. We detail the actors and decision makers who impact tree composition and diversity across several land types. Finally, we identify research, education and outreach needs as they relate to creating more diverse and resilient urban forest ecosystems.

Ocean surface heat fluxes play a significant role in the genesis and evolution of various marine-based atmospheric phenomena, from the synoptic scale down to the microscale. While in-situ measurements from buoys and flux towers will continue to be the standard in regards to surface heat flux estimates, they commonly have significant gaps in temporal and spatial coverage. Previous and current satellite missions have filled these gaps; though they may not observe the fluxes directly, they can measure the variables needed (wind speed, temperature, and humidity) to estimate latent and sensible heat fluxes. However, current remote sensing instruments have their own limitations, such as infrequent coverage, signals attenuated by precipitation, or both. The Cyclone Global Navigation Satellite System (CYGNSS) mission overcomes these limitations over the tropical and subtropical oceans by providing improved coverage in nearly all weather conditions. While CYGNSS (Level 2) primarily estimates surface winds, when coupled with observations or estimates of temperature and humidity from reanalysis data, it can provide estimates of latent and sensible heat fluxes along its orbit. This paper describes the development of the Surface Heat Flux Product for the CYGNSS mission, its current results, and expected improvements and changes in future releases.

The direct measurements of the magnetic flux density in steel blocks within Compact Muon Solenoid (CMS) magnet yoke are performed with 22 flux loops installed in selected regions of the yoke. The 10,000-ton CMS magnet flux return yoke encloses a 4 T superconducting solenoid with a 6-m-diameter by 12.5-m-length free bore and consists of five dodecagonal three-layered barrel wheels and four end-cap disks at each end. The yoke steel blocks, mostly up to 620 mm thick, serve as the absorber plates of the muon detection system. A TOSCA 3-D model of the CMS magnet has been developed to describe the magnetic field everywhere outside of the tracking volume which was measured with a field-mapping machine. In the present study, for the first time, the reliable reconstruction of the magnetic flux density in the steel blocks of the yoke is performed using the CMS magnet standard discharges from the operational magnet current of 18.164 kA. To provide this reconstruction, the voltages induced in the flux loops (with amplitudes of 20–250 mV) have been measured with six 16-bit DAQ modules and integrated offline over time. The results of the flux loop measurements during three magnet ramp downs are presented and discussed.

Autophagy is a highly conserved self-degradation process involving the degradation and recycling of cellular components and organelles. Although the involvement of autophagy in metabolic changes during fruit ripening has been preliminarily demonstrated, the variations in autophagic flux and specific functional roles in fruit ripening remain to be elucidated. In this study, we analyzed the occurrence of autophagy during tomato fruit ripening. The results revealed differential expression of SlATG8 family member during tomato fruit ripening. Transmission electron microscopy observations and dansylcadaverine (MDC) staining confirmed the presence of autophagy at the cellular level in tomato fruits. Furthermore, the overexpression of SlATG8f induced the formation of autophagosomes, increased autophagic flux within tomato fruits, effectively enhanced the expression of ATG8 proteins during the color transition phase of fruit ripening, thereby promoting tomato fruit maturation. This overexpression also led to the accumulation of vitamin C (VC) and soluble solids while reducing acidity in the fruit. Collectively, our findings highlight the pivotal role of SlATG8f in enhancing tomato fruit ripening, providing insights into the mechanistic involvement of autophagy in this process. This research contributes to a better understanding of key factors regulating tomato fruit quality and offers a theoretical basis for tomato variety improvement.

Permanent magnet brushless DC motor (BLDCM) is usually controlled by six step commutation method, and flux-weakening method is used to make the motor run higher above the base speed. For now, it is considered that the weak magneto-electric angle range is 0-pi/3, and that of deep weakening is pi/3-pi/2. In the field- weakening control, the forward shift of commutation point will form inverter circulating current in the three-phase bridge of inverter and the stator winding of the motor. In this paper, the principle of inverter circulating current formed by inverter is analyzed. Through magnetic potential analysis and Simulink simulation, it is concluded that flux-weakening control will generate inverter circulating current in the inverter and motor stator winding. The inverter circulating current affects the magnetic potential of motor, and magnetic potential will move to the rotating direction of motor rotor. When the forward shift angle of inverter commutation point is 0-pi/6 electrical angle, the movement amplitude of current circulating current of inverter is less than pi/6, which plays the role of weakening magnetic field and driving effect; when the forward moving angle is pi/6-pi/3, the movement amplitude of inverter circulating current exceeds pi/6, which plays the role of magnetic weakening and braking. When the braking effect occurs, the reverse torque will appear, resulting in the decrease of motor torque and efficiency. Therefore, the range of weak magneto-electric angle should be between 0-pi/6.

This article attempts to assess the light pollution of parking lots, using the proprietary measure-ment method with a drone. The main requirements, reflective features of parking lots and typical light curves of luminaires used in lighting this type of areas were presented. Calculations and simulations for various types of luminaires were performed, and then the obtained results were verified in real conditions. The main factors influencing the increase in light pollution were pre-sented and it was proved that it is possible to use the developed measurement method in order to assess the light pollution degree.

Flaxseed (Linum usitatissinum L.) oil is an important source of α-linolenic (C18:3 ω-3), this polyunsaturated fatty acid is well known for its nutritional role in human and animal diet. Understanding storage lipid biosynthesis in developing flaxseed embryos can lead to an increase in seed yield. While a tremendous amount of work has been done on different plant species to highlight their metabolism during embryos development, flaxseed metabolic flux analysis is still lacking. In this context, we have developed an in vitro cultured developing embryos of flaxseed and determined net fluxes by performing three complementary parallel labeling experiments with 13C-labeled glucose and glutamine. Metabolic fluxes were estimated by computer- aided modeling of the central metabolic network including 11 cofactors of 118 reactions of the central metabolism, 12 pseudo fluxes. A focus on lipid storage biosynthesis and the associated pathways was done in comparison with rapeseed, arabidopsis, maize and sunflower embryos. In our conditions, glucose was the main source of carbone of flaxseed embryos, leading to the conversion of phosphoenolpyruvate to pyruvate. The oxidative pentose phosphate pathway (OPPP) was identified as the producer of NADPH for fatty acid biosynthesis. Overall, the use of 13C-metabolic flux analysis provided new insight into flaxseed embryos metabolic processes involved in storage lipids biosynthesis. The elucidation of the metabolic network of this important crop plant reinforces the relevance of the application of this technique to the analysis of complex plant metabolic systems.

Temperature influences the life of many organisms in various ways. A great number of them live under conditions, where their ability to adapt to changes in temperature can be vital and largely determine their fitness. Understanding the mechanisms and principles underlying this ability to adapt can be of great advantage, for example, to improve growth conditions for crops and increase their yield. In times of imminent, increasing climate change, this becomes even more important, in order to find strategies and help crops cope with these fundamental changes. There is intense research in the field of acclimation, that comprises fluctuations of various environmental conditions, but most acclimation research focuses on regulatory effects and the observation of gene expression changes within the examined organism. As thermodynamic effects are a direct consequence of temperature changes, these should necessarily be considered in this field of research, but are often neglected. Also, compensated effects might be missed, even though they are equally important for the organism, since they do not cause observable changes, but rather counteract them. In this work, using a systems biology approach, we demonstrate that even simple network motifs can exhibit temperature dependent functional features, resulting from the interplay of network structure and the distribution of activation energies over the involved reactions. The demonstrated functional features are (i) the reversal of fluxes within a linear pathway, (ii) a thermo-selective branched pathway with different flux modes and (iii) the increased flux towards carbohydrates in a minimal calvin cycle that was designed to demonstrate temperature compensation within reaction networks. By this, we expand the scope of thermodynamic modelling of biochemical processes by addressing further possibilities and effects, following established mathematical descriptions of biophysical properties.

We assessed how close human perceptions of landscape modification matched a multivariate index based on remotely sensed data of the same locations. Using a Human Footprint (HF) map of the continental U.S. (scaled 0-100), we created three series of aerial images, each with ten images distributed evenly across the 10 deciles of HF score. Using a web-based survey, 290 members of the global public ranked the images in one series based on their perception of the degree of human modification. Respondents also reported age, sex, and country. The degree of correspondence between rankings by respondents and by HF score was high, an average of 1.29 units of difference out of a maximum possible of 5.0. Differences among respondents were not explained by age, sex, or general geographic location. These results suggest that human perception of relative landscape modification conforms closely with the relative ranking made by a multivariate, analytical index.

This case study explores communication challenges faced by Spotify users, focusing on messaging consistency, personalization, and user feedback mechanisms. Conducted with students at Umm Al Quwain University, the study reveals a disconnect between Spotify's communication and user expectations, impacting engagement and satisfaction. Key findings highlight the need for personalized messaging, improved communication channels, and active user feedback incorporation. By implementing these recommendations, Spotify can bridge the communication gap, enhance user experience, and solidify its position as a leader in user-centricity.

Ecological corridors function as a viable way to mitigate the environmental impact arising from forest fragmentation by interconnecting forest fragments through various techniques. In this context, the objective of this study is to propose a route for the implementation of an ecological corridor in the Itapemirim river watershed. The specific objectives were: (i) to delimit the permanent preservation areas (APP) of the Itapemirim river watershed and compare land use and land cover in the delimited areas; (ii) to calculate landscape ecology indices and select the forest fragments with the highest potential for ecological corridor implementation using Fuzzy logic; (iii) to assess costs and trace the best route for ecological corridor implementation, considering distance and physical impediments; (iv) to assess land costs and expropriation costs to delimit the ecological corridor in the study area. To map land use and land cover, the MapBiomas platform was used, based on Landsat 8 satellite images. The permanent preservation areas were delimited according to criteria established by Law No. 12.651 of May 25, 2012, which establishes parameters, definitions, and limits for APP. The characterization and structural quantification of some landscape ecology indices were performed using the QGIS 3.26 computational application, through the LecoS 3.0.1 plugin and Fragstats 4.2. The connected forest fragments were the Caparaó National Park, the Serra das Torres State Natural Monument, and the fragments selected through the application of Fuzzy logic to the landscape ecology indices. The corridor was delimited according to the lowest cost route, considering land use and land cover, APP, fragment potential, slope, and subnormal clusters. For each cost raster image, its respective statistical weights were calculated using the Analytic Hierarchy Process (AHP) hierarchical method, as well as for the analysis of priority areas for forest restoration, considering land use and land cover, APP, pedology, lithology, and biological importance. The interconnection between protected areas and fragments with the ecological corridor followed the orientation described by CONAMA nº 09/96. Based on the development of the work, the following results were identified: the highest land use and land cover class is pasture. Of the area designated for permanent preservation, 68.58% is in conflicting use with the legislation. The bare land value per hectare of the pasture class is the second highest among the bare land value per LULC values, representing 64.28% of the total. The priority area map showed that 31.86% of the area was classified as of very high or high importance and 42.97% as low or very low priority for forest restoration. Thus, it is concluded that the least cost path algorithm associated with the result generated by the multi-criteria decision method (AHP) constitutes an important tool for planning and implementing an ecological network by taking into account the primary factors for decision-making regarding the location of the best route.

Indole and indole-3-lactate are known dominant microbial tryptophan catabolites (MICT). In obesity, the fecal indole concentration corresponds to the normal one, and that of indole-3-lactate significantly decreases along with other MICT, while it increases in blood plasma. During the analysis of the «enzymatic landscape» of the intestinal microbiota we find an almost twofold increase in the correlation between the concentrations of fecal MICT and the «enzymatic landscape», with indole-3-lactate having the closest relationships with the “enzymatic landscape” of all MICT. Here, we report statistically significant correlations of indole-3-lactate and the gut microbial enzymes for fructose, amino sugars, nucleotides, polyamines metabolism, and sulfoglycolysis. We also demonstrate that indole-3-lactate producing microbiota representatives increase three-fold in obesity. The phenotype of the microbiotic population is thus represented by completely different genera and species of microorganisms in obese individuals compared to healthy donors.

Industrial agriculture (IA) is the predominant model of food production since the Green Revolution in the 1950s. IA has been recognized among the main drivers of biodiversity loss, climate change and native pollinator decline. This is controversial, given that native agricultural pollinators are an important resource biota already contributing to crop yield, especially in areas defined as "world biodiversity hotspots” (WBH). These areas often overlap with agricultural zones hosting a significant proportion of cultivated land, mainly through intensive agricultural practices. Pollinator biodiversity and pollination services in these places are currently under threat due to the negative consequences of IA. The dual role of insects as key players allowing the maintenance of the natural ecosystem, as well as main crop pollinators, is particularly exacerbated and urgently requires conservation actions in WBH and food-producing zones. Here we summarize the known negative effects of IA on pollinator biodiversity and illustrate these problems by considering the case of Chile. Food exports represent a considerable part of the economy in this OECD “developing country” in the “Global South”, and a large part of its surface has been highlighted as a unique WBH. This area is currently being replaced by IA businesses at a fast pace, threatening local biodiversity. We present agroecological strategies for sustainable food production and pollinator conservation in food-producing WBHs like Chile. These alternatives recognize native pollinators as internal inputs that cannot be replaced by IA technological packages or external inputs and support the development of agroecological and biodiversity restoration practices to protect their existing biodiversity. We suggest a strategy that integrates four fundamental pillars for producing food in a sustainable way, recognizing biodiversity and local cultural heritage: 1) Share the land, restore and protect; 2) Ecological intensification; 3) Localized knowledge, research and technological development; and 4) Territorial planning and implementation of socio-agroecological policies. We suggest that this approach does not need greater modification of native pollination services that sustain the world with food and basic subsistence goods, but a paradigm change where the interdependency of nature and human wellbeing are recognized for ensuring the present and future of the world’s food security and sovereignty as well as considering the reduction of consumerism and food waste.

The unique qualities of areas with natural landscape features help provide sustainability. Moreover, their different vegetation covers and ecosystems contribute to the preservation of their visual attraction. In recent years, the demand for natural areas has not only been seen at a recreational level, but has also become associated with the conservation and sustainability of those areas. Although the concept of sustainability is expressed from an ecological point of view, studies indicate that the visual aspect is also an important component. Thus, in this study, a visual quality assessment was carried out which considered both objective and subjective evaluations of different habitat types. Efteni lake-wetland and Melen Ağzı dunes (Düzce), Anzer, Ayder, and Çat Düzü highlands (Rize), and Sultanmurat and Taşli highlands (Trabzon) were selected as the study areas. A visual quality analysis was conducted with a total of 43 participants (23 students, 16 local inhabitants and four lecturers) in order establish their preferences in areas with different landscape characteristics. For the determination of the visual qualifications of these areas, a total of 24 photographs showing typical images representing each habitat type (three photographs for each) were employed. Taking perceptual parameters into consideration, assessment of visual quality was made according to the points given to each photo by the participants. Consequently, differences in visual quality were found to be influenced by the demographic status of the participants, differences in habitat types, recreational trends and the conservation status of the habitats.

We prove an analog of the removable singularity theorem for bounded harmonic functions on stratified sets. The harmonic functions are understood in the sense of the soft Laplacian. The result can become one of the main technical components for extending the well-known Poincaré–Perron’s method of proving the solvability of the Dirichlet problem for the soft Laplacian.

We consider an autonomous heat engine in simultaneous contact with a hot and a cold reservoir, and described within a linear-irreversible framework. In the tight-coupling approximation, the rate of entropy generation is effectively written in terms of a single thermal flux which is a homogeneous function of the hot and cold fluxes. The specific algebraic forms of the effective flux are deduced in scenarios containing internal and external irreversibilities for the typical example of a thermoelectric generator.

Based upon a radically new approach, this paper describes a 2-box absolute flow model that calculates the CO₂ transfer between the atmosphere and a terrestrial / ocean mixing reservoir. Given the inputs of anthropogenic fossil fuel emissions (CO2ff), atmospheric CO₂ mixing-ratio and nuclear weapons bomb yields, the model calculates atmospheric d¹³C and Δ¹⁴C time-series, with the level of agreement for d¹³C being to within ± 0.05 ‰, for Δ¹⁴C to within ± 3‰, spanning 200 years. The model contains only seven internal parameters which are varied to optimize the fit. Yet according to conventional wisdom, this model should not work. It is commonly held that the ¹³C and ¹⁴C isotopic forms of carbon bypass seawater carbonate chemistry, resulting in very different absorption properties (Revelle factor) as compared to ¹²C. This study rejects this assumption, and uses the same residence time and reservoir mixing properties for all isotopes. The paper includes an analysis justifying why the isotopic bypass of the Revelle factor is not significant. The study describes the use of the model to track CO2ff takeup using two separate measures, a) the amount of molecular CO2ff remaining in the atmosphere and b) the amount of atmospheric growth attributable to CO2ff, thereby resolving discrepancies in published values.

It has been suggested that the measured magnetic properties of hydrides under pressure claimed to be high temperature superconductors indicate that the materials are granular superconductors. Such materials will show reduced or no magnetic field expulsion under field cooling, and will trap magnetic fields when the external magnetic field is removed. They will also exhibit hysteretic behavior in magnetoresistance and other transport properties. Here we point out that hysteresis in transport properties has never been reported for hydrides under pressure. Its presence, with the expected features, would indicate that the materials trap magnetic flux, hence that they can sustain persistent currents without dissipation, something that all superconductors can do. Conversely, its absence would indicate that these materials are not superconductors.

Layered superconductors are attractive because some of them show high critical temperatures. While their crystal structures are similar, those compounds are composed of many elements. Compounds with many elements tend to be incongruent melting compounds, thus, their single crystals cannot be grown via the melt-solidification process. Hence, these single crystals have to be grown below the decomposition temperature, and then the flux method, a very powerful tool for the growth of these single crystals with incongruent melting compounds, is used. This review shows the flux method for single-crystal growth technique by self-flux, chloride-based flux, and HPHT (high-pressure and high-temperature) flux method for many-layered superconductors: high-T_c cuprate, Fe-based and BiS₂-based compounds.

Eddy-driven jets are of importance in the ocean and atmosphere, and to a first approximation are governed by Rossby wave dynamics. This study addresses the time-dependent flux of fluid and potential vorticity between such a jet and an adjacent eddy, with specific regard to determining zonal and meridional wavenumber dependence. The flux amplitude in wavenumber space is obtained, which is easily computable for a given jet geometry, speed and latitude, and which provides instant information on the wavenumbers of the Rossby waves which maximize the flux. This new tool enables the quick determination of which modes are most influential in imparting fluid exchange, which in the long term will homogenize the potential vorticity between the eddy and the jet. The results are validated by computing backward- and forward-time finite-time Lyapunov exponent fields, and also stable and unstable manifolds; the intermingling of these entities defines the region of chaotic transport between the eddy and the jet. The relationship of all of these to the time-varying transport flux between the eddy and the jet is carefully elucidated. The flux quantification presented here works for general time-dependence, whether or not lobes (intersection regions between stable and unstable manifolds) are present in the mixing region, and is therefore also easily computable for wave packets consisting of infinitely many wavenumbers.

The behavior of convective boundary conditions is studied to delineate their role in heat and mass relegation in the presence of radiation, chemical reaction, and hydromagnetic forces in three-dimensional Powell-Eyring nanofluids. Implications concerning non-Fourier’s heat flux and non-Fick’s mass flux with respect to temperature nanoparticle concentration were examined to discuss the graphical attributes of the principal parameters. An efficient optimal homotopy analysis method is used to solve the transformed partial differential equations. Tables and graphs are physically interpreted for significant parameters

In recent years, numerous topologies of single phase and three phase Field Excited Flux-Switching Machine (FEFSM) have been developed for several applications. Comparative study of three types of single-phase low-priced Field Excited Flux-Switching Machine (FEFSM) is presented in this paper. Both the conventional 8S/4P sub-part rotor design and 6S/3P salient rotor design have an overlapped winding arrangements between armature coil and field excitation coil that depicts high copper losses as well as results in increased size of motor. Additionally, FEFSM with salient structure of the rotor have high flux strength in the stator-core that has much impact on high iron losses. Copper consumption and iron loss being a crucial proportion in total machine losses. Therefore a novel topology of single phase modular rotor field excited FSM with 8S/6P configuration is proposed, which enable non-overlap arrangement between armature coil and FEC winding that facilitates devaluation in the copper losses. The proposed modular rotor design acquires reduced iron losses as well as reduced active rotor mass comparatively to conventional rotor design. It is very persuasive to analyze the best range of speed for these rotors to avoid cracks and deformation, the maximum tensile strength (can be measured with principal stress in research) of the rotor analysis is conducted using JMAG. A deterministic optimization technique is used to enhance the performance of 8S/6P modular rotor design. The electromagnetic performance of conventional sub-part rotor design, F1-A3-3P design and proposed novel-modular rotor design are analyzed by 3D-Finite Element Analysis (3D-FEA), includes flux linkage, flux distribution, flux strength, back-EMF, cogging torque, torque characteristics, iron losses and efficiency.

The general-purpose Compact Muon Solenoid (CMS) detector at the Large Hadron Collider (LHC) at CERN includes the hadronic calorimeter to register the energies of the charged and neutral hadrons produced in the proton-proton collisions at the LHC at a center of mass energy 13.6 TeV. The calorimeter is located inside the superconducting solenoid of 6 m in diameter and 12.5 m in length creating the central magnetic flux density of 3.8 T. For operating optimally in the high pileup and high radiation environment of the High Luminosity LHC, the existing CMS endcap calorimeters will be replaced with a new high granularity calorimeter (HGCal) comprising of an electromagnetic and a hadronic section in each of the two endcaps. The hadronic section of the HGCAL will include 44 stainless steel absorber plates with a relative permeability value well below 1.05. The volume occupied by 22 plates in each endcap is about 21 m3. The calculation of the axial electromagnetic forces on the absorber plates is a crucial element in designing the mechanical construction of the device. With a three-dimensional computer model of the CMS magnet, the axial forces on each absorber plate are calculated and the dependence of forces on the central magnetic flux density value is presented. The method of calculation and the obtained results are discussed.

Plasma plays an important role in semiconductor processes. With the recent miniature and integration, the control of plasma became essential for the success in critical dimension of a few nanometers and etch narrow and deep holes with high aspect ratios. Recently, the etching process has reached physical limitations due to a significant increase in wafer surface temperature under the elevated amount of RF power, affecting not only the warpage phenomenon but also etching uniformity and etching profiles. Therefore, the plasma characteristics are identified using invasive single Langmuir probe (SLP) for wafer temperature diagnosis. Optical data is obtained through a non-invasive optical emission spectroscopy (OES) and the plasma parameters are derived to compare and verify with the SLP. Two variables, electron temperature and electron density, are substituted for the heat flux formula to derive the heat flux according to its location. Using a wafer-type temperature sensor, check the derived heat flux values and compare trends. Such studies are expected to be able to calculate heat flux values in real time, anticipate wafer temperatures, and solve existing problems.

Although total nett CO₂ atmospheric flow can be estimated with reasonable accuracy, the contributing gross fluxes between the atmosphere and the earth's surface are poorly understood. This paper presents a method, driven by the objective of simplicity, by which the global outflow and inflow of CO₂ between atmosphere and a globally equivalent "mixing reservoir" can be estimated, using the isotopes ¹⁴C and ¹³C as tracers. It has been asserted that the isotopic carbon in CO₂ cannot be directly used as a tracer in flow studies because it is not subject to the Revelle factor. Evidence is provided showing that this view is mistaken. The model contains 7 key parameters which are used to create synthetic records of Δ¹⁴C and d¹³C spanning 200 years or more, including during the period of atmospheric weapons testing and its decay known as the "bomb pulse". By optimising the fit between these computed values and the historical records of d¹³C and Δ¹⁴C, all seven key parameters are determined. The effective "mixing reservoir" is thereby determined to have a size around six times that of the atmosphere, with global outflux rising from 39.7 GTC yr-1 in 1750 to 58.9 GTC/yr in 2020, this figure probably not including annually cycled carbon.

Memristors were proposed in the early ’70s of the XXth century by Leon Chua as a new electrical element linking the charge and the flux. Since that first introduction, these devices have positioned themselves to be considered as possibly fundamental for the new generations of electronic devices. It has to be mentioned that actual memristors have only been recognized to exist as physical elements. In this paper, we apply a modeling framework to generate a model describing experimental measurements performed on a ReRAM. We show how to apply the Dynamic Route Map technique in the general case to obtain an approximation to the differential equation that determines the behaviour of the device.

The sand-dust horizontal flux is an important parameter for the study on aeolian sand transport, as well as an important foundation. In this study, a field experiment was developed to measure the data of aeolian transport and microclimate during different dust events with an auto sand sampler, a piezoelectric saltation sensor (H11-Sensit) and a 10 m high meteorological tower in Ta Zhong, the hinterland of the Taklimakan Desert from July to August in 2010. Then, the sampling efficiency of auto sand sampler and horizontal dust flux of near surface were analyzed based on observed data. The results were as follows: sand collector skip turnover increased with the increase of the intensity of dust weather frequency increases, the power function relationship y=2.115 x0.9841, R2 = 0.9206, flip frequency per minute increased from 0.2794 times to 1.3041 times, change is obvious; With the strength of the weather, time to flip the average sediment is shrinking. Sandstorm weather, skip to flip a volume of 3.7160 g, grade I flying sand weather flip a volume of 4.0275 g, the amount of class II flying sand weather turns over a 5. 0035g.The horizontal dust flux of different dust events that calculated with the equation Q=256M; the maximum of one dust event was about 190.335 kg, and the minimum was 1.2 kg. Overall, the sand transportation rate increased with wind speed. However, the changes of sand transportation rate did not quite fit in with wind speed during some dust events, and in this case the corresponding surface temperature was significantly higher. The experimental data obtained can provide theoretical basis for regional sand control and enacting effective engineering measures.

The low relative humidity (RH) levels in a greenhouse during the daytime in a strawberry (Fragaria × ananassa Duch) cultivation period negatively affect the growth of strawberry related to photo-physiology. Therefore, this study was conducted to confirm an efficient RH management method by analyzing the phenotypic characteristics related to photo-physiology by controlling the RH in a greenhouse during the daytime with a fog system. Strawberry plants were grown respectively in a greenhouse affected by natural RH changes (control) and in a greenhouse with 40% ~ 50% RH adjusted during the daytime using a fog system. In the greenhouse, with controlled RH, the temperature decreased, and the RH was higher in the initial growth stage of strawberry planting than the control. It was observed a significant increase in the survival rate of the strawberry plant, as well as the incidence of powdery mildew, was lowered. In addition, the photosynthetic rate and OJIP chlorophyll a fluorescence transients related to photosystem II efficiency of strawberry leaves were significantly higher in the fog treatment than in the control. In winter, during the day, the number of days on which the temperature dropped below 20℃ has increased, the greenhouse temperature with controlled RH was lower due to the fog system. When the yield per strawberry plant in January and February was investigated, the control was higher than the RH treatment. Therefore, RH management using a fog system must be controlled at a level where a temperature range is adequate for plant growth, in which the efficient control of these parameters increases strawberry productivity.

Steel products have experienced long-standing problems such as unstable product quality and low product homogeneity. In the continuous casting process, realizing constant temperature pouring is an effective way to improve product homogeneity. Plasma heating can compensate for the temperature drop during casting with a tundish and maintain a stable degree of superheating of the molten steel in the tundish. Plasma heating has a certain impact on the cleanliness of the molten steel and on the tundish covering flux in the tundish while compensating for the temperature drop. This paper uses SEM-EDS, XRD and FactSage to analyze the cleanliness of the molten steel and the characteristics of the tundish covering flux before and after heating. The results show that the number density of inclusions in the tundish is significantly lower after heating, improving the floating removal rate of small-sized inclusions; after heating, the surface morphology of the tundish covering flux sample appears transparent and glassy, with uniform morphology; XRD results show that the tundish covering flux after plasma heating exhibits no crystal precipitation and is amorphous and that there is a certain regularity before and after heating; there are no obvious changes in the composition of the tundish covering flux in the liquid phase area.

The study utilizes the energy-flux-vector method to analyze the heat transfer characteristics of natural convection in a wavy-wall porous square cavity with a partially-heated bottom surface. The effects of the modified Darcy number and modified Rayleigh number on the energy-flux-vector distribution and mean Nusselt number are examined. The results show that when a low modified Darcy number with any value of modified Rayleigh number is given, the recirculation regions are not formed in the energy-flux-vector distribution within the porous cavity. Therefore, a low mean Nusselt number is obtained. The recirculation regions do still not form and thus the mean Nusselt number has a low value when a low modified Darcy number with a high modified Rayleigh number is given. However, when the values of the modified Darcy number and modified Rayleigh number are high, the energy flux vectors generate recirculation regions and thus a high mean Nusselt number is obtained.

In this study is developed an aerobic and anaerobic stoichiometric model for Saccharomyces cerevisiae, compartmentalized in mitochondria and cytosol. This model considers the central metabolism of S. cerevisiae and it possesses the peculiarity of having catabolic and anabolic biochemical reactions for the synthesis of the higher alcohols contained in tequila; involving 94 metabolites and 117 reactions; of which 93 correspond to biochemical internal reactions and 24 to transport fluxes between the medium and the cell. The model is validated under aerobic and anaerobic conditions for the main fermentation metabolites and it coincides with experimental results and those in silico reported in the literature. This model is used to obtain three different physiological states of S. cerevisiae through of estimation of its distributions of fluxes calculated from experimental data reported in literature of fermentation in continuous culture during the tequila production under different dilution rate (0.04-0.12 h^-1). The model developed constitutes a tool for the estimation of flux distribution maps during fermentation processes for the production of tequila, which could permit estimate yields and visualize different fermentation scenarios.

Growing crystals of nickel niobate (NiNb2O6), we noticed that changing growth conditions allowed our material to enter different areas of the phase diagram. In particular, we found that excess material accumulated within and above the liquid zone. Analysis showed that this was an unincorporated constituent. Changing the ratio of the constituent oxides - an excess of ~4% of either NiO or Nb2O5 gave us the opportunity to investigate changes in zone stability, melting temperature and quality of the resulting crystal. We found that a small excess of nickel oxide decreases the melting temperature significantly, and created the best pseudo-rutile NiNb2O6 crystal studied, while higher amounts of niobium oxide allowed us to stabilize the NiNb2O6 columbite phase. This research reinforces the idea that self-flux as a travelling solvent can significantly impact crystal growth parameters and quality.

As artificial intelligence takes an increasingly prominent role in healthcare, a growing body of research is being dedicated to its application in the investigation of communication sciences and disorders (CSD). This study conducts a bibliometric analysis of AI-based research in the field of CSD published up to December 2023. Utilizing the Web of Science and Scopus databases, we identified 15,035 publications, with 4,375 meeting our inclusion criteria. From 1985 onwards, there has been a consistent annual increase in publications, averaging at 16.51%, notably surging from 2012 to 2023. The primary communication disorders studied include autism, dysarthria, dementia, Parkinson’s, and aphasia. Noteworthy AI techniques employed in CSD research encompass machine learning, automatic speech recognition, support vector machine, and deep learning. Our analysis provides a comprehensive overview, serving as a valuable resource for researchers, developers, and professionals seeking to comprehend the evolving landscape of AI in CSD research. Moving forward, collaborative efforts need to prioritize addressing ethical concerns, ensuring data privacy, enhancing methodological enhancements, and considering ecological validity in the application of AI in studies related to communication disorders.

The aim of this work is to provide a full description of how air temperature and solar radiation induce changes in the land cover over an Antarctic site. We use shortwave broadband albedo (albedo integrated in the range 300-3000 nm) from a spaceborne sensor and from field surveys to calculate the monthly relative abundance of landscape units. Field albedo data were collected using a portable albedometer over seven landscape units: clean fresh snow; clean old snow; rugged landscape composed of dirty snow with disperse pyroclasts and rocky outcrops; dirty snow; stripes of bare soil and snow; shallow snow with small bare soil patches; bare soil. MODIS MCD43A3 daily albedo product was downloaded using the Google Earth Engine API from the 2000-2001 season to the 2020-2021 season. Each landscape unit was characterized by an albedo normal distribution. The monthly relative abundance of the landscape units were calculated by fitting a linear combination of the normal distributions to the histogram of the MODIS monthly mean albedo. The monthly relative abundance of the landscape unit consisting of rugged landscape composed of dirty snow, with dispersed clasts and small rocky outcrops exhibits a high linear positive correlation with the monthly mean albedo (R2=0.87) and a high linear negative correlation with the monthly mean air temperature (R2= 0.69). The increase of the solar radiation energy flux from September to December coincides with the decrease of the relative abundance of the landscape unit composed of dirty snow with dispersed clasts and small rocky outcrops. We propose a mechanism to describe the evolution of the landscape: uncovered pyroclasts act as melting centres favouring the melting of surrounding snow. Ash does not play a decisive role in the melting of the snow. The results also explain the observed decreasing of the thaw depth of the permafrost on the island in the period 2006-2014, resulting from an increase in the snow cover over the whole island.

Species dispersal from a territorial zone is a complex process. The reasons for species dispersal are determined by both natural and human factors. The purpose of this study is to develop a cost surface for a hypothetical landscape that accounts for various species dispersion features. With tigers (Panthera Tigris Tigris) as the focal species, a model for a hypothetical landscape has been built to predict the dispersion patterns of the species' individuals from one habitat patch to another. Initially, four major factors influencing tiger dispersal are explored. Following that, Game Theory assigns a score to each grid in the landscape matrix based on the landscape features in the focal landscape. Specific predefined ratings are also utilized for scenarios that are very complex and may change depending on variables, such as the interaction of the dispersing tiger with co-predators. The two scores mentioned above are combined to create a cost matrix that is shown across a landscape complex to estimate the impact of each landscape component on tiger dispersal. This approach helps wildlife managers develop conservation plans by recognizing important characteristics in the landscape. The results of the model like the one described in this work might be beneficial for a wide range of wildlife management activities such as corridor management, smart patrols, and so on. A cost surface over any focal landscape may serve as a basis for policy and purpose design based on current landscape conditions.

Mangrove ecosystems play an important role in local livelihoods in coastal regions of tropical and subtropical countries. However, in recent years urbanisation has changed the income structure of residents near mangroves. Different landscapes provide different job opportunities; thus, analysis of regional landscape patterns is important for understanding income structures. In this study, surveys on the income structure and landscape patterns of the surrounding areas of three mangrove sites were conducted in the Hau and Hoang Mai River estuaries in Nghe An Province, North-Central Vietnam. The results revealed that both natural and socio-economic landscape components affected income structure. The major occupations in the study area were agriculture, including husbandry, sea fishing, and trading. Land morphology and river type were the major factors influencing the income from agriculture, while coastline morphology primarily affected income from sea fishing. Community-based trading was carried out in the study area; thus, the population inside each administrative unit was a significant factor increasing income, while the retail market size in an area had significant negative effects, potentially due to the increasing number of competitors. Our study aimed to evaluate mangrove ecosystem importance for local livelihoods in relation to landscape patterns, and the results contribute to urban planning based on the conservation and sustainable use of mangrove ecosystems.

Forest vegetation plays a key role in the cycling of mercury (Hg) and organic matter (OM) in terrestrial ecosystems. Litterfall has been indicated as the major transport vector of atmospheric Hg to forest soils, which is eventually transported and stored in the sediments of forest lakes. Hence, it is important to understand how changes in forest vegetation affect Hg in soil and its biogeochemical cycling in lake systems. We investigated the pollen records and the geochemical compositions of sediments from two lakes (Schurmsee and Glaswaldsee) in the Black Forest (Germany) to evaluate whether long-term shifts in forest vegetation induced by climate or land use influenced Hg accumulation in the lakes. We were particularly interested to determine whether coniferous forests were associated with a larger export of Hg to aquatic systems than deciduous forests. Principal components analysis followed by principal component regression enabled us to describe the evolution of the weight of the latent processes determining the accumulation of Hg over time. Our results emphasize that the in-lake uptake of Hg during warm climate periods, soil erosion after deforestation and emissions from mining and other human activities triggered changes in Hg accumulation during the Holocene stronger than the changes caused by forest vegetation alone.

Abstract: The internationally accepted goals of eliminating climate gas emissions implies substantial investments in renewable energy (RE) facilities. This will inevitably lead to major impacts on landscapes. Landscape concerns linked to RE facilities are already leading to controversies in many local communities. In this article, we focus on the question of landscape democracy related to the establishment of RE facilities. Based on recommendations from the European Landscape Convention, an analytical framework is presented identifying three main dimensions of landscape democracy, followed by an overview of arrangements, procedures and methods that are or may be used to encourage democracy. The procedures and methods are analysed based on examples from Denmark and Norway. This is followed by an analysis of decision levels with a special focus on the principle of subsidiarity. Finally, recommendations are presented to strengthen landscape democracy in relation to the installation of RE-facilities.

OpenToolFlux is an open-source software to estimate soil gas fluxes from gas concentration time-series data generated by automatic chamber systems. This paper describes the physical equipment used as well as software design and workflow. The software is a command-line application that imports tabular time-series data from the analyzer following the instructions specified in a configuration file by the user, performs configurable data-cleaning operations, and outputs a data file with volumetric flux estimates as well as diagnostic plots. The software can be configured according to the specifics of physical equipment and experimental setup and is therefore applicable in a wide range of studies.

Researchers achieved high torque volume ratios in magnetorheological (MR) fluid braking devices by introducing multiple layers and multiple poles concepts. The number of magnetic poles, pole geometry and placement have a significant effect on these multi-pole MR brake performances. This research work focused on the effect of the pole head geometry in a multi-pole dual-disc MR brake for the enhancement of braking torque. The magnetic field generated by the electromagnetic coil has to penetrate through pole heads and travel orthogonally through the rotor and MR fluid layers to achieve maximum brake torque. This flow depends on the profiles of the magnetic pole head area and corresponding core dimensions. This study considered pentagon, square, hexagon, trapezoid and ellipse pole head profiles in place of the conventional circular pole and the best possible core dimensions were used for each geometry. A three-dimensional electromagnetic analysis of the MR brake is conducted to simulate the brake performance. Results showed that the hexagonal and elliptical pole heads are having better magnetic field area, magnetic intensity distribution and higher magnetic flux lines piercing through the MR fluid perpendicularly than the circular and square pole heads. An increment of 3.88% for braking torque performance is obtained, and the braking torque is significantly enhanced.

Thermoregulation is important for maintaining homeostasis of our body. It can be easily broken under anesthesia. An appropriate method to measure the core body temperature is needed, especially for elderly patients because the efficiency of thermoregulation gradually decreases with age. The aim of this study was to examine the accuracy and feasibility of using of SpotOn® sensor in lower extremity orthopedic surgery in elderly patients aged over 80 years by comparing a SpotOn® sensor with two other reliable minimal-invasive methods: a tympanic membrane thermometer and a bladder thermometer. This study enrolled 45 patients aged over 80 years who were scheduled to undergo a lower extremity surgery. Body temperature was measured using a SpotOn® sensor, tympanic membrane thermometer and bladder thermometer. Agreements between the SpotOn® sensor and the other two methods were assessed using Bland and Altman plots for repeated measures adjusted for unequal numbers of measurements per patient. Compared with TempBladder, bias and limits of agreement for TempZHF were 0.07℃ ± 0.58℃. Compared with TempTympanic, bias and limits of agreement for TempZHF were -0.28℃ ± 0.61℃. 3M SpotOn® sensor using ZHF method for patients aged over 80 years undergoing lower extremity surgery shows feasible measurement value and sensitivity.

Estimating evapotranspiration at field scale is a major component of sustainable water management. Due to the difficulty to assess some major unknowns of the water cycle at that scale, including irrigation amounts, evapotranspiration is often computed as the residual of the instantaneous surface energy budget. One of the Surface Energy Bal-ance components with the largest uncertainties in their quantification over bare soils and sparse vegetation areas is the ground heat flux (G). Over the last decades, the es-timation of G with RS data has been mainly achieved with empirical equations, on the basis of the G and net radiation (Rn) ratio, G/Rn. G/Rn empirical equations generally require vegetation data (Type I empirical equations), in combination with surface tem-perature (Ts) and albedo (Type II empirical equations). In this article we aim to evalu-ate the estimation of G with RS. For the first time, we compare eight G/Rn empirical equations against two types of machine learning (ML) methods: an ensemble ML type, the Random Forest (RF), and the Neural Networks (NN). The comparison of each method is evaluated over dense dataset, including a wide range of climate and land covers, with data of Eddy-Covariance towers extended along the mid-latitude area that encompass the European and African continent. Our results have shown evidence that the driver of G in bare soils and sparse vegetation areas (Fraction of Vegetation, Fv <= 0.25) is Ts, instead of vegetation greenness indexes. On the other hand, the estimation of G with Rn, Ts or Fv decreases at dense vegetation areas (Fv >= 0.50). There are not significant differences between the most accurate type I and II empirical equations. For bare soils and sparse vegetation areas the empirical equation that better estimates G is E8, which combines the Leaf Area Index (LAI) and Ts. In dense vegetation areas (Fv >= 0.25), an exponential empirical equation based on Fv (E4), shows the best performance. However, ML better estimates G than the empirical equations, independently of the Fv ranges. A RF model with Rn, LAI and Ts as predictor variables shows the best accuracy and performance metrics, outperforming the NN model.

As an essential synthetic material used in continuous casting of steels, mold fluxes improve the surface quality of steel slabs. In this study, a CaO-SiO₂-Na₂O based low-fluorine mold flux was solidified by an improved water-cooled copper probe with different temperatures of molten flux and different probe immersion times. The heat flux through solid films and the film structures were calculated and inspected, respectively. The results indicate: large internal cracks (formed in the glassy layer of films during solidification) were observed, the formation and evolution of those cracks contributed to the the unstable heat flux density. The roughness of the surface in contacted with the water-cooled copper probe formed as films were still glassy and the roughness have no causal relationship with crystallization or devitrification. Combeite with columnar and faceted dendritic shapes is the main crystal in the film.

The building envelope has the most significant contribution in the reduction of the building energy consumption. Application of new, alternative and improved materials and systems has an important impact on the buildings performances. This paper is focused on the thermal transmittance, as an indicator of the thermal conductance of the construction element. It includes comparisons of the U-values, calculated by software, with those measured in situ on three representative façade walls. The walls have been constructed with the new wall system Fragmat NZ-1, a new product in Macedonian buildings. This research provides basic information on the thermal transmittance of the system. The results of the analysis show that the in situ measuring is a useful tool in validation of the precision of analytically calculated values, since it was difficult to obtain precise results from the analytical calculations only, especially when the layers are with non-uniform thickness.

Industries, which are mainly responsible for high energy consumptions, need to invest in research projects in order to develop new managing systems for rational energy use and to tackle the devastating effects of climate change caused by human behavior. The study reported in this paper concerns the forging industry, where the production processes generally start with the heating of the steel in furnaces and continue with other processes, such as heat treatments and mechanical machining. One of the most critical operations, in terms of energy loss, is the opening of the furnace doors for the insertion and extraction operations. During this time, the temperature of the furnaces decreases by hundreds of degrees in a few minutes. Because the dispersed heat needs to be supplied again through the combustion of fuel, increasing the consumption of energy and the pollutant emissions, the evaluation of the amount of the lost energy is crucial for the development of operating or mechanical systems able to contain this dispersion. To perform this study, CFD simulation software was used. Results show that at the door opening, because of temperature and pressure differences between the furnace and the ambient, turbulences are generated. Results also show that the amount of energy lost for an opening of 10 minutes for radiation, convection and conduction is equal to 5606 MJ where convection is the main contributor with 5020 MJ. The model created, after being validated, has been applied to perform other simulations in order to improve the energy performance of the furnace. Results show that a reduction of the opening time of the door allows energy savings and limits pollutant emissions.

Children are inherently curious about everything they encounter, making the early years a perfect time for STEAM (science, technology, engineering, arts, and math) investigations. An outdoor learning environment can influence STEAM concept formation of preschoolers with intentional design that offer STEAM learning affordances. Despite the rising interest in early STEAM education, there is still limited literature on how the outdoor environment may influence STEAM learning behaviors of preschoolers (3-5 years old). This scoping review intends to evaluate the existing knowledge regarding the physical factors that contribute to STEAM learning affordances in an outdoor environment for children aged 3 to 5. The review included studies from the last twenty years. This scoping review was conducted in accordance with the criteria outlined in the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews (PRISMA-ScR). For this scoping review, 843 citations were discovered across four databases (JSTOR, Scopus, EBSCOhost, and Web of Science), ProQuest, and Google Scholar, and 31 articles were considered eligible for inclusion. Through the synthesis of information from those 31 studies, a list of STEAM learning behaviors of children and STEAM activity-supportive settings were identified that may positively influence preschoolers' STEAM concept development.

Landscape changes based on spectral responses allow showing plant cover changes through diversity, composition, and ecological connectivity. The spatial and temporal vegetation dynamics of the Bijagual Massif from 1986 to 2021 were analyzed as a measure of ecological integrity, conservation, and territory. The covers identified were high open forest (Hof), dense grassland of non-wooded mainland (Dgnm), a mosaic of pastures and crops (Mpc), lagoons (Lag), and bare and degraded lands (Bdl). The Bijagual Massif has 8,574.1 ha. In 1986, Dgnm occupied 42.6% of the total area, followed by Mpc (32.8%) and Hof (24.5%); by 2000, Mpc and Hof increased (43.7 and 28.1%, respectively), while Dgnm decreased (28%); by 2021, Dgnm was restricted to the northeastern zone and continued to decrease (25.2%), Mpc occupied 52.9%, Hof 21.7% and Bdl 0.1%. Of the three fractions of the connectivity probability index, only dPCintra and dPCflux contribute to ecological connectivity. Hof and Dgnm show patches with biota habitat quality and availability. Between 1986 and 2021, Dgnm lost 1,489 ha (41%) and Hof 239.5 ha (11%). Mpc replaced various covers (1,722.2 ha; 38%) in 2021. Bijagual has a valuable biodiversity potential limited by Mpc. Territorial planning and sustainable agroecological and ecotourism proposals are required due to the context of the ecosystems.

Through a variety of unique ecosystem services, peatlands provide critical support to society and play a significant part in the global environmental system. Unfortunately, anthropogenic activities pose a hazard to these peatlands. This study estimated a total economic value (TEV) of peatland ecosystem services and examined relationships between the TEV and landscape characteristics in Riau province, Indonesia. A comprehensive economic valuation questionnaire, covering household socioeconomic conditions, ecological information and landscape characteristics, perception of peatland importance, peatland product collection data, and villagers' willingness to pay (WTP) for habitat and biodiversity protection, was administered to 200 household representatives (92% confidence) from five villages distributing across distinct landscapes. The survey took place from May to June 2023. The respondents derived numerous advantages from the peatlands, culminating in an average TEV of USD 3,174.31 per household per year. This value predominantly reflects a use value, accounting for 80.85% of the TEV. Notably, the use value emanates primarily from the provisioning of food through fishing, soil fertility, wild plants, and animals. However, to a lesser extent, there exists a marginal presence of a non-use value, encompassing the habitats provided to endemic or endangered species, the preservation of biodiversity for future generations, and the sanctity associated with forests deemed sacred. The observed variance in landscape characteristics appears to wield an influence on amounts of benefits derived from the peatlands. This phenomenon can be attributed to prevailing land use conditions and geographical distances.

In the Lubumbashi charcoal production basin (LCPB) in south-eastern DR Congo, agricultural and charcoal production activities regularly give rise to fires that lead to considerable degradation of the miombo open forest. This study analyzes the drivers of the spatio-temporal distribution of active fires and burnt areas in the LCPB by processing MODIS and Landsat data. In addition, a Kernel density analysis method (KDE) was used to estimate fire risk, while the effect of the road network and dwellings on vegetation fires was highlighted in areas between 0-3000m radius. Obtained results revealed that fires in the LCPB generally occur between April and November mainly during the day, between 11am and 12pm. These fires are concentrated in the central and south-western part of the LCPB, more specifically in the savannahs and near roads. From 2002 to 2022, an average of 11,237 active fires and an average of 6,337 km2 of burnt areas were recorded in the LCPB. Each year, these fires peak in August, and despite their steady decline, the few fires that have affected the forests have caused more devastation (more than 2790 km2 / year) than those observed in the fields and savannah. These figures highlight the imperative need to put in place fire prevention and management measures in the LCPB, with particular emphasis on awareness, monitoring and fire-fighting measures.

We present TOLGAN that generates traditional oriental landscape (TOL) image from a map that specifies the locations and shapes of the elements composing TOL. Users can create a TOL map by using a user interface or a segmentation scheme from a photograph. We design the generator of TOLGAN as a series of decoding layers where the map is applied between the layers. The generated TOL image is further enhanced through an AdaIN architecture. The discriminator of TOLGAN processes a generated image and its groundtruth TOL artwork image. TOLGAN is trained through a dataset composed of paired TOL artwork images and their TOL maps. We present a tool through which users can produce a TOL map by specifying and organizing the elements of TOL artworks. TOLGAN successfully generates a series of TOL images from the TOL map. We evaluate our approach using a quantitative way by estimating FID and ArtFID scores and a qualitative way by executing two user studies. Through these studies, we prove the excellence of our approach by comparing our results with those from several important existing works.

The objective of this was to evaluate the effects of organic fertilization on biomass production in Urochloa spp. pastures, and the soil biological and physical properties in the Colombian Amazon region. Three pastures crops (Urochloa decumbens, Urochloa humidicola and Urochloa brizantha) with 5 years old were examined in a hill landscape. A randomized complete blocks design covering an area of 5005 m2, with 1 m separation between units to minimize edge effects. Highly significant differences in Urochloa spp. biomass production were observed before and after organic fertilization (i.e., initial time: 992.19±97.66 kg DM ha-1 vs. final time: 1920.94±155.44 kg DM ha-1 vs.), but not between different fertilization treatments. The interaction between the treatment and time was significant for total density (p=0.0300) and richness (p=0.0300) of soil macrofauna. Furthermore, the interaction between treatment and soil depth was significant for bulk density (p=0.0187). The linear mixed effects analysis showed that soil bulk density and penetration resistance were lower in 0 - 10 cm depth than that observed in 10 - 20 depth and 20 - 30 cm depth. Overall, the application of organic fertilizers had a significant and positive effect on Urochloa spp. forage biomass and on the physical and biological properties of soils that had historically been affected by extensive livestock farming in a deforested hill landscape in the Colombian Amazon region.

Participatory landscape conservation is an innovative approach that weaves theory and practice to bridge the gap between theoretical models and practical applications. Intertropical regions as the case of Mexico face challenges to conciliate regional governability, social justice, and nature conservation. The State of Michoacan is one of these regions where the challenges exacerbate since nature conservation is last due to its ongoing territorial disputes. We implemented the participatory landscape conservation approach by creating a complementary form of protected areas with ongoing conflicts, drought conditions, and extreme poverty. We conducted participatory mapping and land cover/use analyses as main methodological tools to reach consensus among stakeholders. We integrated, macro, micro and social scales to provide sound arguments to integrate local, scholar and policy makers perceptions. The outcomes of the participatory mapping analyses were assessed. The present papers provide evidence of the positive outcome of using a Participatory Landscape Conservation to establish a Biosphere Reserve, safeguarding one of the most biologically diverse and delicate ecosystems consisting of seasonally dry tropical forests within a rather disputed region. We discussed the relevance of our findings and compared them to ongoing regional and global trends in the light of other forms of establishing protected areas.

This book review essay looks at Tim Marshall’s “Prisoners of Geography” and its in-depth examination of the interplay between geography and international politics. The aim is to highlight the book's key themes, including geopolitics, borders, trade routes, geopolitical conflict and colonial legacies. Through insightful analysis and engaging text, Marshall uncovers the central role that geography plays in shaping our world. The book’s continuing relevance is underlined by its links to significant global events and the author’s forward-looking questions. By recognising the practical factors that influence decision-making, rather than the purely ideological, the book offers a fresh perspective on current political and economic turmoil. The examination of the influence of geography and the call for increased international cooperation makes it a valuable resource for students of geography and anyone interested in political geography and globalisation.

Mountain summit in Madagascar have generally a specific habitat and that figure home a local endemicity of herpetofauna. Mantidactylus pauliani, a typically aquatic and critically endangered amphibian from Ankaratra Mountain, is among of them. This species inhabits high elevation with restricted distribution range. Our study highlights here a new data of this species and its viability with environmental change. So that, we carried out annual monitoring from 2018 to 2021. Nine fixed transects of 100 m were done along the streams between 1762 and 2378 m a.s.l. We followed the herpetofaunal standard technique for collecting data (systematic ecological niche searching and direct observation), and data analysis was performed using χ² tests and Fac-tor Correspondence Analysis. Here we present the new ecological data of M. pauliani. This spe-cies home between 1900 - 2378 m a.s.l. within the humid forest and savannah habitat. We noticed also a fluctuation in population size and migration to the upper throughout the years across the season, and the stream quality and volume of water variation. This habitat change makes it vul-nerable and the annual bushfire surrounding plays a negative impact. Knowledge and under-standing of its ecological guilds is needed for running and updating conservation activities

Towards a better understanding of vegetation, permafrost, climate, landscape and lithology control on major and trace element (including macro and micro-nutrients and toxicants) transport in riverine systems, we studied two medium size (100-150 thousand km² watershed area) pristine rivers (Taz and Ket) of boreal and subarctic zone, western Siberia. Choosing the river basins of very low population density (< 1 people km-²) in the absence of any industrial or agricultural activity allowed testing the sole effect of natural factors and long-range atmospheric transfer on hydrochemistry of riverine solutes during the open water period. In the permafrost-bearing Taz River (main stem and 17 tributaries), sizable control of vegetation on element concentration was revealed. In particular, light coniferous and broadleaf mixed forest controlled DOC, and some nutrients (N, Mn, Fe, Mo, Cd, Ba); deciduous needleleaf forest positively correlated with macronutrients (P, Si, Mg, P, Ca) and Sr, and dark needle-leaf forest impacted Ntot, Al and Rb. Organic C stock in the upper 30-100 cm soil positively correlated with Be, Mn, Co, Mo, Cd, Sb, and Bi. The lithological control was generally poorly pronounced, due to abundant peat deposits overlaying the mineral strata. However, cretaceous carbonate mineral-bearing sedimentary deposits positively impacted the pH and concentration of Si, Mg, Ca and Cs. In the Ket River basin (large right tributary of the Ob River), we revealed the correlations between the phytomass stock at the watershed and alkaline-earth metals and U concentration in the river water. This control was weakly pronounced during high-water period (spring flood) and mostly evidenced during summer low water period.

While many practitioners and experts understand the risks associated with low urban tree diversity, they often lack the ability to rectify issues they encounter on their own. The current system of tree production and procurement is complex – shaped by market pressures, nursery and site constraints, local governance, and differing professional objectives among those who grow, specify, and plant trees. To understand this complexity as well as constraints to- and opportunities for increasing urban tree diversity, we conducted a series of focus groups comprised of nursery growers, landscape architects, and urban foresters. Our results highlight a significant list of considerations and constraints to diversity (both shared among green industries and some specific to growers or purchasers). More importantly, in discussing our findings we outline actionable strategies for increasing urban tree diversity.

An important set of Ecosystem services (ES) provided by Green infrastructures (GI) consists of habitats and species protection and improvement, which coincides with biodiversity conservation and enhancement. From this perspective, one of the most outstanding features of GI is its attitude towards addressing the negative impacts of habitat fragmentation on the supply of ES related to biodiversity by strengthening the effectiveness of connections between protected areas. Building on a methodological approach defined in previous studies by Cannas, published in a set of articles between 2017 and 2018 [1–4], this study identifies ecological corridors (EC) with reference to the spatial layout of a set of protected areas. Moreover, such methodological approach is implemented into the context of the Sardinian region to map EC, which form, together with protected areas, a network representing the spatial framework of a regional GI. Finally, the relation between the EC and the spatial taxonomy of the landscape components featured by environmental relevance (LCFER), identified by the Regional Landscape Plan is analyzed, in order to assess if, and to what extent, the present regional spatial zoning code can be used as a basis to implement regulations aimed at protecting EC.

Antibodies constitute a major component of serum on protein mass basis. We also know that the structural diversity of these antibodies exceeds that of all other proteins in the body and they react with an immense number of molecular targets. What we still cannot quantitatively describe is, how antibody abundance is related to affinity, specificity and cross reactivity. This ignorance has important practical consequences: we also do not have proper biochemical units for characterizing polyclonal serum antibody binding. The solution requires both a theoretical foundation, a physical model of the system, and technology for the experimental confirmation of theory. Here we argue that the quantitative characterization of interactions between serum antibodies and their targets requires systems-level physical chemistry approach and generates results that should help create maps of antibody binding landscape.

Wildfires are important sources of landscape change in Mediterranean environments, creating large patches of natural habitats (i.e., scrublands) inside protected areas, whereas woodland patches remained at the border in the vicinity of human settlements. Landscape patterns resulting from these gradients influence habitat suitability for mesocarnivores regarding food and shelter. In winter and summer 2019, we sampled 16 independent line-transects of four camera traps each (for a total of 64 cameras), covering the main habitats of the study area (woodlands, scrublands, and crops). Cameras were baited to compensate for low detectability of target species, and mesocarnivore contacts were analyzed by means of GLMMs and occupancy models. We hypothesized that Mediterranean mesocarnivores were constrained by two opposing forces, pushing them living in semi-natural but highly fragmented and heterogeneous landscapes created by humans, or living in natural but less suitable and continuous habitats created by fire regimes. In the former case, mesocarnivores will find protection against predators and resting sites in forests, as well as improved food opportunities in crops and urban areas, despite the possible interference with humans and their pets. Potential cascading effects linked to ecological roles of Mediterranean mesocarnivores on the succession of Mediterranean landscapes would imply longer-term effects of human disturbance on landscape trends.

Watershed’s landscape features and climate features have a significant influence on the mountainous catchment’s hydrological response. This literature review synthesizes recent kinds of literature investigating associations between surface runoff and catchment’s landscape features, and the potential controls of climate variables, with an emphasis on mountainous regions. Such factors are significant controls on surface runoff through their influence on the rate of infiltration capacity, antecedent soil moisture conditions, and underlying bedrock structure. The literature review indicates that there are considerable issues that remain to be resolved in advance a concrete understanding of the influence of catchment’s characteristics on surface runoff response.

Within the town, Abiotic is a built environment that includes buildings, roads, pedestrians, and other elements that interact with biotics, which are living things including plants, animals, and humans. From a landscape ecological perspective, the urban structure consists of (1) a matrix, which is a collection of dominant buildings and homogeneous elements, (2) Patches are grouped as housing, urban forests, parks, lakes, and finally (3) Corridors such as roads, rivers, and pedestrians. The dominance of watertight areas over green open spaces in urban development can lead to increased temperatures and runoff. The condition of the soil structure and the steep slope of the soil can cause landslides, therefore urban development must pay attention to the natural conditions of the area being built. This research was conducted in Kota Baru, Bogor, South Tangerang, and Cikarang (Bekasi Regency). The purpose of this study is to determine the natural environment and the built environment as well as changes in the ecosystem and their consequences for the new town and its surroundings. This research uses quantitative and qualitative approaches. Analysis of land-use change uses spatial and temporal methods, while Nieuwolt's equation is used to measure comfort. This study finds comfortable environmental planning, with green open spaces such as urban forests, city parks, and bodies of water, such as lakes, as a space for interaction between fellow new city residents and people outside the new towns.

This article represents survey data of historical and architectural documentation of Sri Radha Binod Ashrama locally known as the Panishail temple. Temple architecture is a common feature of traditional religious architecture practice in Bangladesh. This article is a historical and architectural investigation of a less known and mixed type of Hindu temple style in the Bengal region. The Panishail temple complex has a collection of structures that include tomb, temples, and residences aged between fifty to two hundred years. Over the ages, these heritage buildings have displayed a unique architectural style of ancient Bengal and still serving as a living sacred landscape heritage. However, like most of the ancient monuments of Bangladesh, Panishail structures inside this complex stand against the threat of decay and anthropogenic destruction with no effort to conserve them. There is a need for immediate action of research, exploration and preservation to save this historic landmark. This research aims to investigate historic and physical features of the temple complex through a systematic survey and documentation effort. This research will lay a foundation for future conservation intervention on this site. Moreover, this work will significantly contribute to historic temple architecture study in Bangladesh.

Growing potato demands considerable external inputs of pesticides due to its susceptibility to various pests and pathogens. Here we present an attempt to differentiate the Slovak rural landscape with respect to the possibility of effective potato cultivation and to characterise soil parameters of current potato cultivation areas with the aim to increase the sustainability of the potato production. The selection was based on soil climatic, production and economic parameters. By using the GIS tools and existing databases on soil characteristics in Slovakia, maps of soil suitability categories for potato cultivation were generated. In Slovakia, it was found that 12.3% of farmland is very suitable for potato cultivation and that as much as 43.1% is not suitable. Later the specified categories were characterised in detail and specified with respect to geographic, soil, climatic, production and economic parameters. Currently, most potato crops are cultivated on Eutric Cambisols (27%), Chernozems (20%) and Mollic Fluvisols (18%). Loamy soils (65%), soils without gravel (62%), deep soils (74%) and soil situated on plains (55%) are dominant in these regions. We suggest that potato cultivation should be concentrated on the most suitable areas, thereby increasing the economic profitability, improving the ecological stability of the country and supporting the sustainability of the agriculture.

Currently, the use of numerical models for reproducing the landscape evolution of a river basin is part of the day-by-day research activities of fluvial engineers and geomorphologists. However, despite landscape modelling is based on a rather long tradition, and scientists and practitioners are trying to schematize the processes involved in the evolution of a landscape since decades, there is still the need for improving both the knowledge of the physical mechanisms and their numerical coding. The present review focuses on the first aspect, discussing the main components of a landscape evolution model and their more common schematizations, presenting possible open questions to be addressed towards an improvement of the reliability of such kind of models in describing the fluvial geomorphology.

Identity is the basis and foundation of the cultural landscape. Despite the emphasis of international documents and charters on its various aspects and necessity, today, the cultural landscape is threatened by extinction due to changes of many parameters. Accordingly, it is crucial to find an approach that can sustain cultural identity and its values in the changing world of the twenty-first century. Given the qualitative and the changing nature of cultural identity, achieving an approach which can lead to its continuation is not straightforward. By reviewing and analyzing international conventions and documents, on the one hand, and expert opinions, on the other hand, the present study, therefore, aimed to find out how the approach of cultural landscape values conservation can lead to the continuation of cultural identity in the natural and cultural heritage of Uraman Takht. This paper employed qualitative research methods as a basis for data collection and analysis, which primarily involved the use of content analysis along with field observations and interviews with stakeholders and indigenous residents.

Transcription of glycine-rich RNA-binding protein 2 (PeGRP2) transiently increased in root and shoot of Populus euphratica (salt-resistant poplar) upon initial salt exposure and tended to decrease after long-term NaCl stress (100 mM, 12 days). PeGRP2 overexpression in the hybrid Populus tremula × P. alba ‘717-1B4’ (P. × canescens) increased salt sensitivity, which was reflected in plant growth and photosynthesis. PeGRP2 contains a conserved RNA recognition motif domain at the N-terminus, and RNA affinity purification (RAP) sequencing was developed to enrich target mRNAs that physically interact with PeGRP2 in P. × canescens. RAP sequencing combined with RT-qPCR revealed that NaCl decreased the transcripts of PeGRP2-interacting mRNAs encoding photosynthetic proteins, antioxidative enzymes, ATPases, and Na+/H+ antiporters in transgenic poplar. Particularly, PeGRP2 negatively affected the stability of target mRNAs encoding photosynthetic proteins (PETC and RBCMT), antioxidant enzymes (SOD[Mn], CDSP32 and CYB1-2), ATPases (AHA11, ACA8 and ACA9), and Na+/H+ antiporter (NHA1). This resulted in (i) a greater reduction in Fv/Fm, YII, ETR and Pn, (ii) a less pronounced salt activation of antioxidative enzymes, and (iii) a reduced ability to maintain Na+ homeostasis in transgenic poplars during long-term salt stress, leading to a lowered ability to tolerate salinity stress.

Well deliverability optimization is essential for oil and gas production and nodal analysis is a common tool used for selecting suitable production parameters. To accurately calculate upstream and downstream pressures at various production rates at a certain selected node, proper modeling of multiphase flow in wellbores is necessary. However, this process is complex due to the inconsistent velocities of the fluids (i.e., oil, gas, and water) and the interaction between the liquids under high temperature and pressure. Empirical models, such as Hagedorn and Brown (1965), Beggs and Brill (1973), and Mukherjee and Brill (1983 and 1985), and the drift-flux model (Zuber 1965) are commonly used for multiphase flow calculations in wellbores. In this paper, we programmed and evaluated three multiphase flow models (Hagedorn-Brown, Mukherjee-Brill, and drift-flux) using Matlab. The programming includes holdup calculation, pressure gradient calculation, pressure traverse calculation, inflow curve determination, inflow performance relationship (IPR) curve determination, and well deliverability determination. Additionally, we conducted a case study to examine the sensitivity of parameters and compare and analyze the results of pressure traverse, tubing intake curve, and deliverability determination between the drift-flux and Mukherjee-Brill models. Sensitivity analysis was conducted on two of the seven parameters in the drift-flux model, and the effects of production and reservoir parameters on well deliverability were analyzed. The case study results indicated that the Mukherjee-Brill model predicted slightly higher bottomhole pressure compared to the drift-flux model at a fixed oil flow rate, but its well deliverability determination was lower. Furthermore, the drift-flux model showed that the pressure increased with an increase in the distribution coefficient for bubble flow (C0_bubble), while the beta parameter had little impact on the calculated pressure in the studied range. The well deliverability increased when the tubing size and reservoir pressure increased, or the tubing head pressure decreased.

TmMgB5O10 spontaneous crystals were synthesized via flux-growth technique from a K2Mo3O10-based solvent. The crystal structure of the compound was solved and refined within the space group P21/n. The first principles calculations of the electronic structure reveal that TmMg-pentaborate is an insulator with an indirect energy band gap of approximately 6.37 eV. Differential scanning calorimetry measurements and powder X-ray diffraction studies of heat-treated solids show that TmMgB5O10 is an incongruent melting compound. A characteristic band of Tm3+ cation corresponding to the 3H6 → 1D2 transition is observed in the photoluminescence excitation spectra of TmMg-borate. The as-obtained crystals exhibit intense blue emission with the emission peaks centered at 455, 479, 667 and 753 nm. The most intensive band corresponds to the 1D2 3F4 transition.

Oil-water separation using special wettability materials has received much attention due to its low energy consumption and high separation efficiency. Herein, a fluorine-free superhydrophobic cotton fabric(PDMS/STA -coated cotton fabric) was successfully prepared by a simple impregnation method using hydroxyl-capped polydimethylsiloxane (PDMS-OH), tetraethoxysilane (TEOS) and stearic acid (STA) as precursors. The Investigation found that the cross-linking reactions between the hydroxyl groups form PDMS-OH, hydrolyzed TEOS made a strong interact of PDMS-OH and cotton fabric. Besides, a suitable roughness surface of coated cotton fabric was established by introducing STA due to its long chain-structure. The contact angle of this composite can reach 158.7°under optical condition due to its low surface energy and desired roughness. The oil/water separation efficiency of PDMS/STA-coated cotton fabric is higher than 90% even after 10 cycles of oil-water separation, the oil flux can reach 11862.42 L m-2 h-1. In addition, PDMS/STA-coated cotton fabric exhibits excellent chemical stability and durability under extreme conditions such as strong acid (HCl, pH=1~2) and alkali (NaOH, pH=13~14), the hydrophobicity of PDMS/STA-coated cotton fabric was decreased to 147° even after 350 cycles of abrasion testing.

Anyon is collective excitation of two dimensional electron gas subjected to strong magnetic field, carrying fractional charges and exotic statistical character beyond fermion and boson. So far, anyons with serial fractional charges only exist in fractional quantum Hall effect. It is still a challenge to find new serial of fractional charges in other physical system and develop an unified mathematical physics theory based on the same root. Here a topological path fusion theory of propagating electrons in magnetic flux lattice is proposed to explore the physical origin of fractional charges based on a generalization of Feynman's path integral theory and Thurston's train track theory. This mathematical physics theory generated the existed serial of fractional charges in fractional quantum Hall effect and predicted new serial of fractional charges. A serial of irrational charges are predicted in one dimensional lattice of magnetic fluxes. Fractionally charged anyons are also generated in two dimensional and three dimensional lattice of train tracks of electric currents, revealing an exact correspondence between knot lattice model and train track model. A new explanation for the modular symmetry of complex Hall conductance and composite fermion in fractional quantum Hall effect is also derived from this topological path fusion theory. Experimental observation of anyon in three dimensions can be realized by constructing three dimensional interlocking magnetic fluxes or mapping magnetic fluxes into forbidden zones in multi-connected space filled by solid state material. A photonic crystal with porous nano-structures is a promising system for detecting fractional charges and paves a new way for topological quantum computation.

Monitoring drought impacts in forest ecosystems is a complex process, because forest ecosystems are composed of different species with heterogeneous structural compositions. Even though forest drought status is a key control on the carbon cycle, very few indices exist to monitor and predict forest drought stress. The Forest Drought Indicator (ForDRI) is a new monitoring tool developed by the National Drought Mitigation Center (NDMC) to identify forest drought stress. ForDRI integrates 12 types of data, including satellite, climate, evaporative demand, ground water, and soil moisture, into a single hybrid index to estimate tree stress. The model uses Principal Component Analysis (PCA) to determine the contribution of each input variable based on its covariance in the historical records (2003–2017). A 15-year time series of 780 ForDRI maps at a weekly interval were produced. The ForDRI values at a 12.5km spatial resolution were compared with normalized weekly Bowen ratio data, a biophysically based indicator of stress, from nine AmeriFlux sites. There were strong and significant correlations between Bowen ratio data and ForDRI at sites that had experienced intense drought. In addition, tree ring annual increment data at eight sites in four eastern U.S. national parks were compared with ForDRI values at the corresponding sites. The correlation between ForDRI and tree ring increments at the selected eight sites during the summer season ranged between 0.46 and 0.75. Generally, the correlation between the ForDRI and normalized Bowen ratio or tree ring increment are reasonably good and indicate the usefulness of the ForDRI model for estimating drought stress and providing decision support on forest drought management.

In the present work, a superlattice structure comprising superconducting and insulator layers is studied. Here, if a magnetic field is applied parallel to the layers, the lack of a pinning center leads to a novel transition; in particular, as the applied magnetic field is reduced, the stationary wave surrounding the magnetic flux quantum in the superconducting layer eventually collides with the superconducting–insulating interfaces on both sides because its radius becomes larger than the width of the superconducting layer. At this instant, the stationary wave will collapse, and a transition will occur: the magnetic quanta are collapsed and thus the uniform magnetic field distribution is achieved, which corresponds to the transition from the superconducting state to the normal state over critical current. Considering a one-dimensional model of the structure, a critical current density equation is derived that indicates an increase in the critical current density for increased applied magnetic field. Subsequently, the same calculation was conducted after changing the direction of the magnetic field component, and the combination of these two calculations expresses the anisotropic property of the structure. The phenomenon is also predicted for anisotropic critical current density. This phenomenon is an important discovery that helps manufacture high-temperature superconducting tape as well as large high-temperature superconducting coils.

This article analyzes local level normative regulations aimed at directly or indirectly conserving the urban landscape in rural areas. Using a discursive analysis methodology on regulatory documents being enforced in a series of localities assigned to a tourism promotion program, evidence suggests that promotional activity retroactively influences the phraseology of these municipal regulations. The results obtained point to the existence of perpetuating historicist approaches within the current regulations, which appear to largely derive from the search for success in the tourism market and the resulting benefits to the local economy.

The applicable conditions and scope of the underground sewage treatment plant include small amount of sewage, less available land on the ground, special requirements for the above-ground landscape, low groundwater level, easy-to-excavate geology, and the buried depth of the sewage return pipe is not very large. It is not under the main road, has certain distance from residential buildings, is not a depression and does not accumulate rainwater, and the sewage discharge requirements are not very strict. The underground sewage treatment plants are suitable in an area, where thermal insulation needs to be considered, less requisitionable land area, and higher environmental requirements The results of underground landscape design study showed that the design of principles, features, styles, water ecologies, combination between community and ecological friendly, operation and maintenance cost of the underground landscape should be emphasized. The construction of ecological complex will lead the sewage treatment plant exchange from minus assets to the ecological positive assets, which will meet the needs of future urban social economic development and environmental protection. The results of development direction exploration study showed that innovation on design concept, breakthroughs of key sewage treatment technology and variation of investment and operation mode can reduce the land occupation investment and operation cost, and the underground sewage plant with large scale and semi-underground mode owes broader prospects for development.

This article presents the results of the study on the elements and spaces that likes and dislikes’ historical urban landscape of Ibarra's city, Ecuador, based on the analysis of the urban image. This research aims to propose an objective way to intervene a historical landscape based on the opinion of the people who frequent the place. Our hypothesis is that the characteristics (age, gender, educational level, and frequency of visits) of the interviewees condition their judgment on liking and disliking. It is proposed to know which of these characteristics condition the judgment. The methodology has two parts: a descriptive statistical analysis with graphs and frequencies used to map each point on the maps, and a logistic regression model to study the relationships between liking and disliking with interviewee characteristics. As results, (1) it has been possible to obtain those elements or spaces that are liked and disliked in proportion graphs and in planimetry. (2) Explanatory analysis of liking and disliking through the logistic regression model and inference to study significant characteristics. It emphasizes that "frequency of visits" is the significant characteristic for the elements and spaces that dislike. It's concluded that the study carried out provides objective tools to obtain the opinion of people and it's useful seen it in planimetry. Also, could be establish priorities to urban authorities about improve and intervention on elements or spaces that people judge because they are liking or disliking.

In many tropical regions, national forests plantations programs have been promoted. Those plantations contribute frequently to habitat changes. However, it is unclear associated effects on habitat fragmentation and landscape connectivity. From 2008 to 2018, we examined plantation and deforestation data base of Manabí province (Ecuador) for assessing fragmentation and connectivity. At regional scale, forest plantations had a significant effect on land uses changes and fragmentation during the study period. Forests decreased from 33.7% to 32.45% between 2008 and 2018 in the study area, although other natural land uses, mostly shrubs, increased almost double (from 2.4% to 4.68%). Most of the deforestation affected native forests during this period, and most of reforested and afforested areas in 2018 covered former agricultural land. In this period, fragmentation data shows a decrease in the number of patches and an increase in patch average size. When considering reforestation, deforestation was higher than the afforested area (58 km2 of difference) increasing the number of patches but with smaller size. The scenarios that presented better connectivity were those where forest areas increased: avoiding deforestation and considering reforestation. Those scenarios had in general a higher number of links and distance. Regionally, the avoiding deforestation scenario increased connectivity for Puma yagouaroundi in the west part of the Manabí province. On the other hand, for the reforested scenario, the number of links also increased on central and extreme northeast areas. Our findings suggest that plantations may contribute to conservation thanks to an increase in forest plantations connectivity between fragmented patches.

Rural landscapes all over the world are subject to great transformations, first of all the continuous and slow depopulation of land and villages. It is a dramatic phenomenon that causes devastating consequences for environmental systems and for the tangible and intangible heritage of entire territories. The situation becomes more ambiguous when it comes to cultural landscapes, especially those internationally recognized as exceptional (i.e. inscribed on the UNESCO World Heritage List). In this case, the risk is to abandon agricultural production in favor of consumerist tourist economies, which can damage the territorial authenticity. In this paper we question the role of the landscape project in strengthening territorial resilience. In particular, a composite and interdependent action is proposed between landscape design and implementation of a multifunctional agriculture model, oriented towards teaching and tourism. To undertake this investigation, a master's thesis work on Landscape Architecture is examined, as an opportunity for a research-by-design method. The application case is the Italian UNESCO site of Vignale Monferrato, a depopulated rural village, characterized by abandoned land and buildings. The paper concludes by outlining replicability application scenarios for the proposed model.

Landscapes evolve due to climatic conditions, tectonic activity, geological features, biological activity, and sedimentary dynamics. These processes link geological processes at depth to surface features. Consequently, the study of landscapes can reveal essential information about the geochemical footprint of ore deposits at depth. Advances in satellite imaging and computing power have enabled the creation of large geospatial datasets, the sheer size of which necessitates automated processing. We describe a methodology to enable the automated mapping of landscape pattern domains using machine learning (ML) algorithms. From a freely available Digital Elevation Model, derived data, and sample landclass boundaries provided by domain experts, our algorithm produces a dense map of the model region in Western Australia. Both random forest and support vector machine classification achieve about 98\% classification accuracy with reasonable runtime of 48 minutes on a single core. We discuss computational resources and study the effect of grid resolution. Larger tiles result in a more contiguous map, while smaller tiles result in a more detailed, and at some point, noisy map. Diversity and distribution of landscapes mapped in this study support previous results. In addition, our results are consistent with the geological trends and main basement features in the region.

Understanding the detailed timing of crop phenology and their variability enhances grain yield and quality by providing precise scheduling of irrigation, fertilization, and crop protection mechanisms. Advances in information and communication technology (ICT) provide a unique opportunity to develop agriculture-related tools that enhance wall-to-wall upscaling of data outputs from point-location data to wide-area spatial scales. Because of the heterogeneity of the worldwide agro-ecological zones where crops are cultivated, it is unproductive to perform plant phenology research without providing means to upscale results to landscape-level while safeguarding field-scale relevance. This paper presents an advanced, reproducible, and open-source software for plant phenology prediction and mapping (PPMaP) that inputs data obtained from multi-location field experiments to derive models for any crop variety. This information can then be applied consecutively at a localized grid within a spatial framework to produce plant phenology predictions at the landscape level. This software supports the development of process-oriented and temperature-driven plant phenology models by intuitively and interactively leading the user through a step-by-step progression to the production of spatial maps for any region of interest. Maize (Zea mays L.) was used to demonstrate the robustness, versatility, and high computing efficiency of the resulting modeling outputs of the PPMaP. The framework is implemented in R, providing a flexible and easy‐to‐use GUI interface. Since this allows appropriate scaling to the larger spatial domain, the software can effectively be used to determine the spatially explicit length of growing period (LGP) of any variety.

The reserves of water, which is one of the most important requirements for human life, gradually decreases under current conditions and rapidly depletes despite being one of the renewable resources. Considering the global water reserves, it became imperative to implement measures to protect the anticipated water reserves. The fact that the amount of quality water per capita decreases every day in the world and the increasing competition in water management could be considered among the indicators of the above-mentioned case. In recent years, as the effects of this adversity became increasingly more evident, several sustainable methods were adopted all over the world such as rain gardens and rainwater storage facilities. These sustainable techniques could be observed in many areas, especially in urban centers. In the present study, the area with the highest water collection was determined at Karadeniz Technical University Kanuni Campus and identified as the study area. Precipitation per square meter and surface runoff volume were identified based on the GIS (Geographic Information System) data, annual water collection volume was calculated, and information on economic and ecological recycling of the water was provided. In conclusion, the precipitation data for 11 years were compared, and it was calculated that the average annual precipitation was 64.06 kg/m² and annual surface runoff water was 552.77 m³. Based on the surface runoff water volume in the months when no irrigation is conducted, a reservoir was designed under the vehicle road and water recycling recommendations were developed.

By analyzing the urban landscape, this investigation focuses on commercial typologies in historical urban areas and its relationship with the urban landscape and its heritage values. Trade plays an essential role in historical urban areas, both in the past and in the present, since it is part of the urban landscape—creating it and modifying it, but also preserving it. Historical protected urban areas contain diverse elements reflecting the impacts of commercial activities that have existed in cities throughout history. At present, the urban landscape of commercial activity is made up of a multiplicity of typologies and formats which interact with the historical landscape and its values, using them to strengthen its strategies of attraction, differentiation, and sales. Shop owners contribute to the preservation of historic urban areas by maintaining the commercial functions within them. Therefore, we affirm that the role of commercial activity in the preservation of urban protected areas is essential. However, further research is needed because this aspect has not been addressed in depth by the scientific community specializing in the management of cultural heritage.