Lightning discharges in electric power networks generate voltage and current surges that are propagated through the electrical network causing damage and shutdowns in the electrical system. To protect the system against these phenomena, surge arresters are very effective and widely used by electrical utilities in their electric grids. This paper presents a methodology for optimized surge arrester allocation based on genetic algorithm (GA), creating a simulation environment in the software ATP (Alternative Transients Program) to implement the proposed methodology. The optimized allocation procedure is based on a fitness function that minimizes the cost of surge arresters and maximizes the number of protected equipment. To carry out this optimized arrester allocation procedure using ATP may demand too much processing time when running large distribution grids. To overcome this difficulty a procedure is proposed to obtain an overvoltage severity description of the grid and select the most critical electric nodes for the incidence of lightning discharges, in the GA allocation procedure. The case study is applied to the IEEE 123-bus electrical feeder to demonstrate the effectiveness of the proposed methodology.

This study aimed to learn disturbance information to effectively control multiple small unmanned surface vehicles (USVs) for marine research purposes at sea. The learned disturbance information was used to investigate the control of multiple USV swarms based on the leading–following formation technique. Numerous studies have already been conducted on swarm control using drones in the air; however, there has been a paucity of studies on swarm control in the sea. Contrary to swarm control in aviation, the fluid density of the sea is high, and the environment is constantly changing; thus, a robot system would be significantly affected by disturbances. This ultimately influences the maintenance of swarm formations and the accomplishment of missions [1,2]. Therefore, it is difficult to control numerous moving objects while maintaining a formation at sea by using the existing aerial drone swarm control technology. To solve this problem, we learned a long short-term memory (LSTM) model with time-series marine environmental data to predict maritime disturbances. Thereafter, the model was applied to a mission-based position control algorithm of each USV constituting the swarm to design a marine unmanned floating vessel swarm control system that can be applied to various marine environments. Specifically, to effectively control numerous small USVs for marine research purposes, ocean currents are learned using the LSTM algorithm, and the predicted ocean currents are used to generate a swarm USV control system for USV formations. In this study, a control system model of several small USVs equipped with two rear thrusters and a front lateral thruster was designed. The LSTM algorithm was learned using the previous ocean current data, and the velocity of the following ocean currents was predicted. The predictions were then used as a system disturbance to determine the thrust of the controller. To measure ocean currents in the sea when each USV moves, the velocity, azimuth, and position (latitude, longitude) data from the GPS mounted on the USV were used to measure the velocity and direction of the hull's movement. Further, the flow rate was measured using a flow rate sensor on a small USV. The USV movement and position were controlled using an artificial neural network-PID (ANN-PID) controller. This study entailed a comparative analysis of the designed USV model results and those generated by the simulator, including the behavior control rule of the USV swarm and the path of the actual USV swarm at sea. It was verified that the effectiveness of the USV mathematical model and behavior control rules. By comparing the movement path of the swarm USV with and without the disturbance learning algorithm and ANN-PID control algorithm applied to the designed simulator, the position error and maintenance performance of the swarm formation were analyzed, and the application results were compared.

This paper proposes an electric vehicle routing problem with considering states of charging stations and suggests solution strategies. Charging of electric vehicles is a main issue in the field of electric vehicle routing problem. There are many studies to find locations of charging stations, recharging functions for batteries of vehicles, and so on. However, states of charging stations significantly affect the routes of electric vehicles, which is not much explored. The states may include open or close of charging stations, occupied or empty of charging slots, and so on. This paper investigates how the states of charging stations are estimated and routing strategies are determined. We formulate a mixed integer programming model and suggest how to solve the problem with exact method. Numerical examples provide the optimal routing strategies of electric vehicles in the changing environments of the states of charging stations.

The field of water management is continually changing. Water has been subject to external shocks in the form of climate change and globalization. Analysis of water management is subject to disciplinary developments and inter-disciplinary interactions. Are these developments well documented in the literature? Initial observations on interdisciplinary literature suggest that results are fragmented, implying that a state-of-the-art review is needed. The objective of this paper is to close this gap by reviewing recent developments in water economics that address the increasing perceptions of water scarcity by looking first at changes in supply and quality of water, and then at impacts of climate change on water extremes. Among responses to such challenges, the paper identifies changes to water use patterns by including and co-managing water from different sources—surface and groundwater, wastewater, and desalinated water. Technological advancements also are among the resources that address water challenges. Water challenges reflect also on management of internationally shared water. A recent surge in scientific work identified international treaties as playing a significant role in water management. The paper reviews recently employed economic tools, such as experimental economics, game theory, institutional economics, and valuation methods. And finally, it explores modeling approaches, including hydro-economic and computable general equilibrium models that are being used to deal with water challenges.

As a model for economic and ecological systems, replicator dynamics represents a basic form of agent competition for finite resources. Here, we investigate the effects of stochastic resetting in this kind of processes. Random reset events abruptly lead individual resources to a small value from which dynamics must start anew. Numerical results show that resource distribution over the population of competing agents develops highly nonuniform profiles, exhibiting clustering and fluctuations with anomalous dependence on the population size. This non-standard statistical behavior jeopardizes an analytical treatment based on mean-field assumptions. We propose alternative simplified analytical approaches which provide a stylized description of entropy evolution for the clustered distribution of resources and explain the unusually slow decrease of fluctuations.

The increasingly rapid flow of technological development is now a tool to improve backwardness, renew the system, as well as a means of improvement in various aspects of life. For companies, the development of information and communication technology is a new innovation or breakthrough to improve service quality. Various benefits provided by technology and information. However, if not handled properly, technology and information will become a boomerang for an organization. HRIS is the application of HRM functions in the application of information and communication technology. The concept of HRIS as a digital form of HRM is increasing along with the outbreak of the Covid-19 pandemic which has caused a large loss impact on all lines of life. The limitation of social interaction in an effort to prevent the wider spread of covid-19 and the higher number of casualties causes business activities to stall. This research uses quantitative methods with a study sample of 100 randomly selected. This study aims to see how clarity of high-tech goals in human resources management, perceived benefits, perceived ease of use, company conditions that can influence attitudes towards HRIS.

Multipartite entanglement is a resource for application in disparate protocols, of computing, communication and cryptography. Nested entanglement provides resource-states for quantum information processing. In this paper, Matryoshka quantum resource-states, which contain nested entanglement patterns, has been studied. A novel scheme for the generation of such quantum states has been proposed using an anisotropic XY spin-spin interaction-based model. The application of the Matryoshka GHZ-Bell states for n-qubit teleportation is reviewed and an extension to more general Matryoshka ExhS-Bell states is posited. An example of Matryoshka ExhS-Bell states is given in the form of the genuinely entangled seven-qubit Xin-Wei Zha state. Generation, characterisation and application of this seven-qubit resource state in theoretical schemes for quantum teleportation of arbitrary one, two and three qubits states, bidirectional teleportation of arbitrary two qubit states and probabilistic circular controlled teleportation are presented.

Human factors are the most relevant issues contributing to adverse events in obstetrics. Specific training of Crisis Resource Management (CRM) skills (i.e., problem solving and team management, resource allocation, awareness of environment, and dynamic decision-making) are now widespread and are often based on High Fidelity Simulation. In order to be used as a guideline in simulated scenarios, they need to be translated into specific and observable behavioral markers. To this purpose, we developed a set of observable behaviors related to the main elements of CRM in the delivery room. The observational tool was then adopted in a two-days seminar on obstetric hemorrhage where teams working in obstetric wards of six Italian hospitals took part to simulations. The tool was used as guide for the Io and as a peer-to-peer feedback. It was then rated for its usefulness in facilitating the reflection upon one’s own behavior, its ease of use, and its usefulness for the peer-to-peer feedback. The ratings were highly positive, around 4 in a 5-point scale. The CRM observational tool is therefore a useful, quick and easy solution to facilitate the debriefing, the peer-to-peer feedback and, most of all, the transfer of safe behavior from simulation to everyday practice.

This paper elucidates the impact of uncertainty on the Markowitz asset allocation and how it performs. The findings imply that when evaluated out-of-sample, estimation errors in parameters might significantly affect how well an allocation performs. Numerous publications that address this ambiguity have been highlighted to emphasize our findings further. In our work, we compare these approaches to alternative allocation strategies and explain their performance in both expected and real out-of-sample events. We find that the Markowitz framework can be improved by using tactics that take uncertainty into account. Longer sample numbers, however, may not always translate into better outcomes. Applying a short-sale constraint can also enhance the initial portfolio. Finally, we find that even more basic approaches to asset allocation, such as equally weighted allocation, perform reasonably well.

Machine learning offers advanced tools for efficient management of radio resources in modern wireless networks. In this study, we leverage a multi-agent deep reinforcement learning (DRL) approach, specifically the Parameterized Deep Q-Network (DQN), to address the challenging problem of power allocation and user association in massive multiple-input multiple-output (M-MIMO) communication networks. Our approach tackles a multi-objective optimization problem aiming to maximize network utility while meeting stringent quality of service requirements in M-MIMO networks. To address the non-convex and nonlinear nature of this problem, we introduce a novel multi-agent DQN framework. This framework defines a large action space, state space, and reward functions, enabling us to learn a near-optimal policy. Simulation results demonstrate the superiority of our Parameterized Deep DQN (PD-DQN) approach when compared to traditional DQN and RL methods. Specifically, we show that our approach outperforms traditional DQN methods in terms of convergence speed and final performance. Additionally, our approach shows 72.2 % and 108.5 % improvement over DQN methods and RL method respectively in handling large-scale multi-agent problems in M-MIMO networks.

This paper presents an optimized energy management strategy for Li-ion power batteries used on electric vehicles (EVs) at low temperatures. Under low-temperature environments, EVs suffer a sharp driving range loss resulted from the energy and power capability reduction of the battery. Simultaneously, because of Li plating, battery degradation becomes an increasing concern as temperature drops. All these factors could greatly increase the total vehicle operation cost. Prior to battery charging and vehicle operating, preheating battery to a battery-friendly temperature is an approach to promote energy utilization and reduce total cost. Based on the proposed LiFePO4 battery model, the total vehicle operation cost under certain driving cycles is quantified in the present paper. Then given a certain ambient temperature, a target temperature of preheating is optimized under the principle of minimizing total cost. As for the preheating method, a liquid heating system is also implemented on an electric bus. Simulation results show that the preheating process becomes increasingly necessary with a decreasing ambient temperature; however, the preheating demand declines as driving range grows. Vehicle tests verify that the preheating management strategy proposed in this paper is able to save total vehicle operation cost.

Convolution forms one of the most essential operations for the FPGA-based hardware accelerator. However, the existing designs often neglect the inherent architecture of FPGA, which puts forward an austere challenge on hardware resource requirements. Even though some previous works have proposed approximate multipliers or convolution acceleration algorithms to deal with this issue, the inevitable accuracy loss and resource occupation easily lead to performance degradation. Toward this, we first propose two kinds of resource-efficient optimized accurate multipliers based on LUTs or carry chains. Then targeting FPGA-based platforms, a generic multiply-accumulate structure is constructed by directly accumulating the partial products produced by our proposed optimized radix-4 Booth multipliers without intermediate multiplication and addition results. Experimental results demonstrate that our proposed multiplier achieves a maximum 51% look-up-table (LUT) reduction compared to the Vivado area optimized multiplier IP. Furthermore, the convolutional process unit using the proposed structure achieves a 36% LUT reduction compared to existing methods. As case studies, the proposed method is applied to DCT transformer and LeNet to achieves hardware resource saving without loss of accuracy.

Multicellular life forms have evolved many times in our planet, suggesting that this is a common evolutionary innovation. Multiple advantages have been proposed for multicellularity (MC) to emerge. In this paper we address the problem of how the first precondition for multicellularity, namely "stay together" might have occurred under spatially limited resources exploited by a population of unicellular agents. Using a minimal model of evolved cell-cell adhesion among growing and dividing cells that exploit a localised resource with a given size, we show that a transition occurs at a critical resource size separating a phase of evolved multicellular aggregates from a phase where unicellularity (UC) is favoured. The two phases are separated by an intermediate domain where where both UC and MC can be selected by evolution. This model provides a minimal approach to the early stages that were required to transition from Darwinian individuality to cohesive groups of cells associated with a physical cooperative effect: when resources are present only in a localised portion of the habitat, MC is a desirable property as it helps cells to keep close to the available local nutrients.

Starting from the fact that the units of local self-government of the Republic of Serbia are not sufficiently oriented towards innovations related to human resources and the environment, the application of quantitative research tradition examines the positioning and understanding of certain procedures and decisions of human resources management regarding the functioning of the environmental protection system, on the one hand, and future strategies for changing the given system, on the other. A series of 105 face-to-face interviews were conducted during the whole of 2016 in 105 of the 191 municipalities in the Republic of Serbia. Examination of the attitudes of the local self-government was carried out using a specially designed closed electronic questionnaire. The results of the multivariate regressions show that the most important predictor of the possible improvement of the environment is the size of the municipality. The remaining variables (e.g., human resources policy, human resources service) did not have significant effects on the ability to improve the environment. In more than half of local self-governments, there was no clearly defined human resources strategy in the field of environmental protection, an environmental protection service, an Environmental Action Plan, as well as an employment plan for waste management in local governments, etc. The research has shown that top managers of local governments agree that the management of human resources in environmental protection represents a significant opportunity to improve the quality of the environment. The results of the research can be used to improve the organization of human resource competence in environmental protection and the quality of a working and sustainable environment in the area of local self-government.

Ecosystem physical structure, defined by the quantity and spatial distribution of biomass, influences a range of ecosystem functions. Remote sensing tools permit the non-destructive characterization of canopy and root features, potentially providing opportunities to link above- and belowground structure at fine spatial resolution in functionally meaningful ways. To test this possibility, we employed ground-based portable canopy lidar (PCL) and ground penetrating radar (GPR) along co-located transects in forested sites spanning multiple stages of ecosystem development and, consequently, of structural complexity. We examined canopy and root structural data for coherence at multiple spatial scales ≤ 10 m within each site using wavelet analysis. Forest sites varied substantially in vertical canopy and root structure, with leaf area index and root mass more evenly distributed by height and depth, respectively, as forests aged. In all sites, above- and belowground structure, characterized as mean maximum canopy height and root mass, exhibited significant coherence at a scale of 3.5-4 meters, and results suggest that the scale of coherence may increase with stand age. Our findings demonstrate that canopy and root structure are linked at characteristic spatial scales, which provides the basis to optimize scales of observation. Our study highlights the potential, and limitations, for fusing lidar and radar technologies to quantitatively couple above- and belowground ecosystem structure.

Due to the imbalance between the supply and demand of oxygen, the oxygen system of iron- and steel-making enterprises in China has problems with high oxygen emission and high pressure in the pipelines, resulting in the energy consumption of oxygen production being high. To relieve this problem, using a large-scale iron- and steel-making mill as a case study, the research on demand forecasting and optimal scheduling of the oxygen system was carried out. The ARIMA model and the GABP model are employed to forecast oxygen demand. Based on the forecast results, an optimal scheduling model for the oxygen system was developed to conduct optimal scheduling. The case study shows that based on the oxygen demand forecast and the optimal scheduling, the oxygen emission and the pipeline pressure in the studied iron- and steel-making enterprise can be significantly reduced, thereby achieving considerable energy-saving effects and economic benefits. Specifically, the following conclusions are obtained: (1) For the oxygen demand forecast, the prediction accuracy of the GABP model is better than that of the ARIMA model. The average MAPE of the 12 sets of data of the ARIMA and GABP models are 23.8% and 20.2%, respectively. (2) By comparing the scheduling results and the field data, it is found that after the scheduling, the amount of oxygen emission has decreased by 6.32%, the pipeline pressure has decreased by 0.61%, and the energy consumption of oxygen compression has decreased by 1.6%. Considering both the oxygen emission loss and the energy consumption of oxygen compression, the total power consumption of the oxygen system is reduced by 1.38%, which saves the electricity cost of about 9.03 million RMB per year.

Nutrient regulation in aquaponic environments has been the topic of research for many years. Most have focused on appropriate control of nutrients in an aquaponic set-up, but very little research has been done on commercial scale applications. In our model, the input data was sourced on a weekly basis from three commercial aquaponic farms in South-East Texas over the course of a year. Due to limited number of data points, dimensionality reduction techniques like pair-wise correlation matrix was used to remove the highly correlated predictors. Feature selection techniques like the XGBoost classifier and Recursive Feature Elimination with ExtraTreesClassifier were used to rank the features in order of their relative importance. Ammonium and calcium were found to be the top two nutrient predictors and based on the months in which lettuce was cultivated, the median of these nutrient values from the historical dataset served as the optimal concentrations to be maintained in the aquaponic solution. To accomplish this, Vernier sensors were used to measure the nutrient values and actuator systems were built to dispense the appropriate nutrient into the ecosystem via a closed loop.

In this study, the external magnetic field emitted by a wireless power transfer (WPT) system and the internal electric field induced into human body models during recharging operations of a compact electric vehicle (EV) are evaluated. To this aim an ad-hoc formulation for the source modeling is coupled with a commercial software that performs numerical dosimetry. Specifically, two realistic anatomical models both in a driving position and in a standing posture are considered, and the chassis of the EV is modeled either as a currently employed aluminum alloys and as a futuristic carbon fiber composite panel. Aligned and misaligned coil configurations of the WPT system are considered as well. The analysis of the obtained results shows that the ICNIRP reference levels are exceeded in the driving position, especially for the carbon fiber chassis, whereas no exceedance is observed in terms of basic restrictions, at least for the considered scenarios.

Biocultural heritage-based products, including regional specialty foods, are increasingly part of sustainable rural development strategies. While export-oriented biocultural products are often the most visible, we examine the role of campesino gastronomic heritage in the Central Valley of Tarija, Bolivia, as a case study of a local market-centered biocultural resource-based development strategy reflected in an alternative agri-food network. We develop a biocultural sustainability framework to examine this network from ecological, economic and sociocultural perspectives. Data are drawn from interviews (n=77), surveys (n=89) and participant observation, with primary and secondary producers of traditional and new products, as well as restaurant owners, market vendors and local consumers. We find that campesino biocultural heritage and the alternative agri-food network surrounding it represent an influential territorial project that underpins many household economies, particularly for women. We conclude that the relatively small investments by local governments to promote campesino gastronomic heritage are having positive ripple effects on small-scale producer livelihoods and on biocultural sustainability. We suggest that further support to increase market access and reduce other barriers to participation in alternative food networks will likely increase the options and benefits available to small-scale producers mobilising campesino gastronomic heritage within the local economy.

When disposing of waste metal resources in landfills, environmental issues such as soil contamination may arise. Recycling these resources not only recovers valuable metals but also mitigates environmental pollution. Platinum (Pt), a valuable metal used in fuel cells for its high water production activity, will see increased future demand as a fossil fuel alternative. This study analyzes the environmental and resource reduction effects of recycled Pt, considering the growing emphasis on its recycling for stable supply and demand of Pt. The environmental impact and resource consumption of recycled Pt with primary Pt (from natural mines) were compared and analyzed using the Life Cycle Assessment (LCA) technique. Results revealed that resource consumption for primary Pt was 8.25E+01 kg Sb-eq./kg, significantly more than the 5.45E+00 kg Sb-eq./kg for recycled Pt. This represents an environmental reduction effect of approximately 93%. In the case of greenhouse gas emissions, primary Pt emitted 1.35E+04 kg CO2-eq./kg, while recycled Pt emitted 6.94E+02 kg CO2-eq./kg, resulting in an environmental reduction effect of approximately 95%. In conclusion, recycling Pt, compared to primary extraction, offers substantial environmental and resource reduction benefits. This study underscores the significance of recycling and highlights the potential environmental improvements achievable through sustainable practices.

The objective of the study was to analyse the antimicrobial susceptibility trends of Spanish porcine bacteria to quinolones, cephalosporins and polymyxins. Isolates of Actinobacillus pleuropneumoniae, Pasteurella multocida, and Escherichia coli were isolated from sick pigs from 2019 to 2022. Antimicrobial susceptibility test was determined by minimal inhibitory concentration (MIC) following internationally accepted methodology. MIC categorization was based on distributing the range of MIC values in four categories being category one the most susceptible (lowest MIC value) and four the less susceptible one (highest MIC value). Moreover, clinical susceptibility (susceptible/resistant) was also determined according to CLSI and EUCAST clinical breakpoints. A logistic and multinomial logistic regression model was used to analyze the susceptibility data for dichotomized and categorized MIC data, respectively for any pair of antimicrobial/microorganism. In general terms, the antimicrobial susceptibility of pig bacteria to these antimicrobials remained stable or increased in the last four years in Spain. In the case of A. pleuropneumoniae and quinolones, it was observed a significant temporal trend where isolates from 2020 had significantly increased odds of being more susceptible than isolates from 2019. In the case of E. coli and polymyxins, a significant temporal trend was observed where isolates from 2020 and 2021 had significantly increased odds of being more susceptible than isolates from 2019 and 2020, respectively. Finally, a significant odd of being less susceptible was only observed for cephalosporins and E. coli for 2020 versus 2019, stagnating for the rest of study period. These results provide sound data on critical important antimicrobials in swine medicine.

The current study sets out to develop an empirical line method (ELM) radiometric calibration framework for reducing atmospheric contributions in UAS imagery and for producing scaled remote sensing reflectance imagery. Using a MicaSense RedEdge camera flown on a custom-built octocopter, the research reported herein finds that atmospheric contributions have an important impact on UAS imagery. Data collected over the Lower Pearl River Estuary in Mississippi during five week-long missions covering a wide range of environmental conditions was used to develop and test a simplified ELM radiometric calibration framework designed specifically for the reduction of atmospheric contributions to UAS imagery in studies with limited site accessibility or data acquisition time constraints. The framework was effective in reducing atmospheric and other external contributions to UAS imagery. Unique to the proposed radiometric calibration framework is the radiance to reflectance conversion conducted externally from the calibration equations which allows for the normalization of illumination independent from the time of UAS image acquisition and from the time of calibration equations development. This paper presents the simplified ELM radiometric calibration framework that can be used as a time-effective calibration technique to reduce errors in the UAS imagery.

Despite the importance of influenza vaccination for healthcare workers (HCWs), their uptake remains challenging. This study aimed to measure influenza vaccine hesitancy among HCWs in Nakhon Phanom province, Thailand. A representative cross-sectional survey was conducted at six hospitals during August – September 2020 using a self-administered questionnaire. HCWs delaying getting influenza vaccines, accepting but unsure, or refusing with doubts were categorized as hesitant. Those accepting without any doubts were classified as non-hesitant. Vaccine hesitancy determinants were identified by multivariable logistic regression analysis. A total of 338 participants (97%) completed the questionnaires; most were female nurses working at district hospitals without pre-existing chronic medical conditions. Nearly 60% of participants (197/338) exhibited influenza vaccine hesitancy, and significant factors included age above 50 years adjusted odds ratio [aOR] 3.2, 95% CI 1.3-8.5), fair knowledge of influenza/vaccination (aOR 0.4, 95% CI 0.2-0.8), and negative influence of other HCW (High level– aOR 2.3, 95% CI 1.1-4.8; Moderate level- aOR 2.1, 95% CI 1.1-4.4). Imparting updated information to the HCW combined with positive guidance from influential peers may help reduce this hesitancy.

Environmental monitoring programs rely on periodic spot sampling at specific locations, followed by laboratory analysis, aiming at the evaluation of water quality at a catchment scale. For this purpose, automatic telemetric stations for specific parameters have been installed by the Institute of Marine Biological Resources and Inland Waters of Hellenic Centre for Marine Research (IMBRIW-HCMR) within several Greek rivers and lakes, providing continuous and temporal monitoring possibilities. Nevertheless, the employment of unmanned surface vehicles (USV) equipped with integrated sensors represents a tool valuable to several monitoring strategies, offering enhanced temporal and spatial coverage over specific timeframes, allowing for targeted examination of sites or events of interest. The USVs have been deployed by Athens Water and Sewerage Company (EYDAP) as a cost-effective tool for the environmental monitoring of surface water bodies of interest, with emphasis on the spatial fluctuations of chlorophyllα, electrical conductivity, dissolved oxygen and pH, observed in Koumoundourou Lake and rivers Acheloos, Asopos and Kifissos. The effectiveness of an innovative heavy metal (HM) system installed in the USV for thein situ determination of copper and lead was also evaluated herewith. The results obtained demonstrate that both the timely detection of potential pollution from both anthropogenic activities and natural processes as well as the monitoring of inland waters are made feasible through the employment of USV.

The strong competition in the automotive industry has required manufacturers to implement lean production, both with methods and techniques specific to Industry 4.0. At the same time, universities must provide graduates with specific skills for applying these new production methods and techniques. In this context, a Lean Learning Factory was developed in the Pitesti University Center, which allows students to learn, experiment, and research, in an environment similar to that of enterprises, the new Lean Manufacturing methods and techniques, and Industry 4.0. The research presented in this study had as its objective identifying the minimum number of repetitions necessary to train operators who serve two differently organized workstations, one classic, the other including digital techniques, but on which the same assembly operation is performed. Several indicators were considered in the analysis, such as the number of errors, the number of stops, the effective duration of the work cycle, and the percentage ratio between the standard duration of cyclical activities and the effective duration of the work cycle. The evolution of these indicators was mathematically modelled by regression functions, using the least squares method. The obtained results also highlight the usefulness of applying the DOJO method as a Lean manufacturing-specific learning technique and the efficiency of implementing digital techniques in work organization.

Objectives: To assess the short-term impact of a single global stretching session on plantar pressures and lumbar range of motion (RoM) over one week in sedentary university students. Design: A randomised controlled trial with two parallel groups. Participants: Sixty-four university students were randomly assigned to a stretching group or control group. The stretching group received a single session of global stretching and the control group remained seated for the same length of time as the stretching session. Main outcome measures: Lumbar RoM and plantar pressures were assessed before, immediately after, 48 hours after, and 7 days after intervention. Results: Group-by-time interaction was significant for lumbar lateral flexion (p = 0.044), right maximal pressure (p = 0.003), left maximal pressure (p = 0.008), right mean pressure (p = 0.025), left mean pressure (p = 0.002), and maximal pressure minus mean pressure in right foot (p = 0.007). The model with plantar pressures showed a significant difference for group-by-time interaction (p = 0.010).Conclusion: Global stretching seems to counteract the ill-effects of prolonged sitting up to seven days with respect to plantar pressure in standing without improving lumbar ROM

Isothermal interrupted hot compression tests of 5754 aluminum were conducted on Gleeble-3500 thermo-mechanical simulator at temperature 350 °C and 450 °C, strain rate 0.1 s-1 and 1s−1. These tests simulated flat rolling to investigate how softening behaviors respond to controlled parameters, such as deformation temperature, strain rate and delay times. This data allowed the parameters for the hot rolling process to be optimized. The delay times during interrupted compression vary between 5s and 60s. The dynamic softening at each pass and metadynamic recrystallization at the intervals of deformation passes were analyzed in detail. 0.2% offset yield strength is applied to calculate the softening fraction undergoing metadynamic recrystallization. A kinetic model was developed to describe metadynamic recrystallization behaviors of the hot deformed 5754 aluminum alloy. Furthermore, the time constant for 50% recrystallization was expressed as functions related to the temperature and the strain rate. The experimental and calculated results were found to be in close agreement, which verified the developed model.

Autonomous shuttles have been used as end mile solutions for smart mobility in smart cities. The urban driving conditions of smart cities with many other actors sharing the road and the presence of intersections have posed challenges to the use of autonomous shuttles. Round intersections are more challenging as it is more difficult to perceive the other vehicles in and near the intersection. Thus, this paper focuses on decision making of autonomous vehicles for handling round intersections. The round intersection is introduced first, followed by introductions of the Markov Decision Process (MDP), the Partially Observable Markov Decision Process (POMDP) and the Object Oriented Partially Observable Markov Decision Process (OOPOMDP) which are used for decision making with uncertain knowledge of the motion of the other vehicles. The Partially Observable Monte-Carlo Planning (POMCP) algorithm is used as the solution method and OOPOMDP is applied to decision making for autonomous vehicles in round intersections. Decision making is formulated first as a POMDP problem, and the penalty function is formulated and set accordingly. This is followed by improvement of decision making with policy prediction. Augmented objective state and policy-based state transition are introduced and simulations are used to demonstrate the effectiveness of the proposed method for collision free handling of round intersections by the ego vehicle.

Ensuring bus priority is to improve traffic sustainability at the signalized intersection. To achieve this, the Bus Priority Lane (BPL) is adopted to provide exclusive right-of-way for buses. However, the BPL is underutilization if the frequency of buses is low. To address this issue, many studies focus on improving the BPL’s utilization efficiency by intermittently allowing general vehicles to access it. However, these studies still have some shortcomings: i) bus priority cannot be guaranteed if general vehicles run on the BPL; ii) the traffic system lacks resilience, especially when the traffic demand is unbalanced. This paper proposes a dynamic right-of-way allocation on the BPL considering traffic system resilience. On the one hand, it ensures absolute bus priority by controlling Connected Automated Vehicles (CAVs) to not interfere with buses. On the other hand, it can improve traffic system resilience by allocating right-of-way for CAVs with heavy turning-movement demand. To validate the effectiveness, the proposed control strategy is evaluated against the non-control baseline. Sensitivity analysis is conducted under seven unbalanced traffic demand levels, four congestion levels, and five CAV Penetration Rates. The results show that the proposed control strategy can ensure absolute bus priority and improve traffic efficiency and traffic system resilience.

The classical joint economic lot-sizing (JELS) policy in a single-vendor single-buyer system generates an equal production quantity in all cycles, where the input parameters remain static indefinitely. In this paper, a new two-echelon supply chain inventory model is developed involving a hybrid production system that simultaneously focuses on green and regular production methods with optimal allocation fraction of green and regular productions. Unlike the classical mathematical formulation, each cycle is independent from the previous one, and consequently, the input parameters can be adjusted to be responsive to the dynamic nature of demand rate and price fluctuation. A rigorous heuristic approach is used to derive a global optimal solution for a joint hybrid production system. The model accounts for carbon emissions from production and storage activities related to green and regular produced items along with transportation activity under a multi-level emission-taxing scheme. The results emphasize the significant impact of green production on emissions. That is, the higher the allocation fraction of green production the lower the total amount of emissions generated by the system, i.e., the system becoming more sustainable. Adopting a hybrid production method not only decreases the greenhouse gas (GHG) emissions dramatically, but also reduces the per unit time total cost when compared with regular production. One of the main findings is that the total system cost generated by the base closed-form formula of the proposed model is considerably lower than that of the existing literature i.e., 33.59% (16.13%) lower in the first cycle (subsequent cycles) when the regular production method is assumed. Moreover, the optimal production rate generated by the proposed model is the one that minimizes the emissions production function. Illustrative examples and special cases that reflect different realistic situations are compared to outline managerial insights.

Water pollution is the main cause of global ecological degradation and seriously affects people's water supply. In order to respond to the water environmental protection policy and provide management departments with a basis for refining water quality, this paper used the environmental Gini coefficient (EGC) method based on four indicators such as water environmental capacity, population, land area, and gross domestic production (GDP) to represent social factors, economic factors, and environmental factors, respectively. After the optimization, for COD, the EGC based on the land area was 0.30, EGC based on population was 0.21, EGC based on environment capacity was 0.02, and the EGC based on GDP was 0.45, and the sum of EGC was 0.962. From this result, we observed that the change in the Gini coefficient of each indicator was not very big. Hence, the most significant change in the Gini coefficient was that of GDP, with a higher rate than other criteria. Then, the COD, AND, and TP discharge allocation model was constructed to obtain the total allocated discharge permit in Lushui Basin. The results found that the total discharge permit allocation of COD, AN, and TP to the Lushui basin were 51483.304 tons/year, 843.119 tons/year, and 340.926 tons/year, respectively. Based on the GIS spatial analysis technology, the distribution of unfair factors that cause pollution inequity was investigated. Finally, the reduction measures were proposed to implement environmental supervision and strengthen water environment management strictly.

In order to meet the national energy saving goals set in the Vietnam National Energy Efficiency Program in the period of 2019 – 2030 (VNEEP), the Vietnamese government has adopted a series solutions and policies to improve energy efficiency. The Vietnam’s 63 provinces will be as main actor for the national achievement in energy efficiency. Thus, understanding the province’s potentiality of energy efficiency is useful for the harmonious and sustainable development between the economy and energy systems. In this study, provincial and national data from General Statistic Office are analyzed in terms of the energy efficiency levels. With the trends of economic development and energy consumption in both national and regional levels, the Lorenz curve between Vietnamese energy consumption and GDP is investigated. The Lorenz coefficient shows the energy allocation is nether reasonable nor balanced. By using clustering method, the 63 provinces of Vietnam clustered into 7 groups that the provinces in the cluster has the similar indexes of energy efficiency i.e. ability, responsibility, potential and difficulty. The energy consumption and GDP are predicted in the period of 2019 – 2025. Based on the difference of GDP development and energy consumption levels, the target of energy efficiency for each province through clustering is set. The results show that 33 provinces included in the cluster 1, 2, 3, 4 and 6 are heavy contribution. Among them, the provinces in the cluster 2 and 3 need to focus on the industry sector in their energy saving policy. The cluster 7 included the under-developed provinces can learn development’s experiences of the provinces in the cluster 1, 2, 3 and 4 to find the best way of their future development.

This paper proposes a cognitive radio engine platform for making exploitation of available frequency channels usable for a tactical wireless sensor network in presence of incumbent communication devices known as the primary user (PU) required to be protected from undesired harmful interference. In the field of tactical communication networks, it is desperate to find available frequencies for opportunistic and dynamic access to channels in which PU is in active. This paper introduces a cognitive engine plaform for determining available channels on the basis of case-based reasoning technique deployable as core functionality on cognitive radio engine to enable dynamic spectrum access (DSA) with high fidelity. Towards this, this paper introduces a plausible learning engine to characterize channel usage pattern to extract best channel candiates for the tactical cognitive radio node (TCRN). Performance of the proposed cognitive engine is verified by conducting simulation tests which confirm the reliability in functional aspect of the proposed cognitive engine covering the learning engine as well as the case-based reasoning engine with showing how well TCRN can avoid the collision against the PU operation considered as the etiquette secondary user (SU) should have.

Automobile industries worldwide extensively use organic solvents. Yet, limited evidence examined the health and safety in handling these solvents, which can only be assured if workers have appropriate knowledge and demonstrate safe practices. A cross-sectional study was conducted to explore the knowledge and practice among workers who are involved with handling organic solvents in the automobile industry in the largest most urban district in Brunei Darussalam. Qualitative data were sought from open-ended questions; observations and pictorial evidence through still photographs. Quantitative analysis showed that 75% of the workers practice reading labels, 94.1% use fully covered clothes, 82.4% wear gloves and 98.5% practice proper hand washing as well as 98.5% cover container lids. The qualitative analysis illustrated workers have general knowledge of materials containing solvents but did not identify the exact solvents, the harmful effects of the solvents, pathophysiology and harmful effects on specific body systems. Health and safety were practiced albeit not consistent. Health and Safety Authorities in Brunei Darussalam must review and enforce specific policies on use of organic solvents so that they can be practiced consistently and safely in automobile industries. Cooperation and collaboration in adhering to the policies are mandatory to ensure health and safety at work.

Predictive numerical models in the study of ground-borne vibrations generated by railway sys-tems have traditionally relied on the segmented approach of subsystems. In this approach, loads are individually applied, and the cumulative effect of rolling stock is obtained through superposi-tion. While this method serves to mitigate computational costs, it may not fully capture the com-plex interactions involved in ground-borne vibrations. Recent advancements in computational and software tools have enabled the development of more sophisticated vibrational pollution models. These advanced models encompass the entire dynamic system, from the rolling stock to the terrain, allowing for continuous simulations with a defined time step. Furthermore, the incorporation of computational contact tools between various ele-ments not only ensures temporal accuracy but also extends the analysis to the frequency domain. This paper explores the evolution of predictive numerical models in the context of ground-borne vibrations generated by trains on ballasted tracks. It highlights the shift from segmented models to continuous simulations, demonstrating the progressive advancement towards more comprehen-sive and accurate representations of railway-induced and generated vibrations in the track sur-roundings as an additional way of evaluate sustainability of infrastructures. In particular, this development of a numerical model from its inception aimed to expand upon ex-isting emission - prediction models by enriching the data with frequency-domain information. This approach has been driven by the aspiration to bridge the gap between numerical predictions and measured signals, striving for a higher level of accuracy in our obtained results. This model can predict the impact of a high-speed rail (HSR) vehicle passing on its own track. It possesses sufficient information in both the time and frequency domains to precisely characterize vibrations. This initiative marks a pivotal advancement, enabling us to more effectively capture the intricacies of ground-borne vibrations and their impact on the surrounding environment due to a deeper comprehension of the occurrences in the frequency domain, there's a heightened ca-pability to accurately characterize vibrations.

This systematic literature review explores the burgeoning use of Artificial Intelligence (AI) in manufacturing systems, in line with the principles of Industry 4.0 and the growth of smart factories. In this landscape, AI is crucial in addressing the complexity and dynamism of contemporary manufacturing processes, including machine breakdowns, fluctuating orders and unpredictable job arrivals. This systematic literature review, conducted using the Scopus database and bibliometric tools, pursues two primary objectives. First, it identifies the prevailing trends in solving scheduling problems with AI and identifies the most commonly used AI techniques in the literature. Secondly, it analyses how authors have successfully employed AI to address production scheduling challenges in real-world industrial settings and assesses the benefits obtained by companies. The dynamic nature of manufacturing systems requires adaptive scheduling paradigms. AI, including Particle Swarm Optimization, Neural Networks, and Reinforcement Learning, is applied to optimize production processes, predict machine failures, and achieve substantial benefits. In real-world applications, these AI-driven solutions have led to reduced production costs, enhanced energy efficiency, and more efficient scheduling processes. AI is increasingly recognized as an essential tool in addressing the evolving challenges of modern manufacturing environments.

Wireless sensor networks are attractive largely because they need no wired infrastructure. But precisely this feature makes them energy constrained. Recent studies find that sensing behaviors that are otherwise deemed efficient consume comparable energy with communication. The duty cycle scheduling is perceived as contributing to achieving energy efficiency of sensing. Because of different research assumptions and objectives, various scheduling schemes have various emphases. This paper designed an adaptive sensing scheduling strategy. The objective function of the scheduling strategy includes minimizing average energy expenditure and maximizing sensing coverage (reducing event miss-rate), and it requires relatively loose assumptions. We determine the functional relationship between the variables of the objective function and the step-size parameters of the proposed strategy through the numerical fitting. We found that the objective function aggregated by the fitting functions is a bivariate multi-peak function that favors the Fibonacci tree optimization algorithm. Once the optimization of parameters is done, the strategy can be easily deployed and behaves consistently in the coming hours. We name the proposed strategy as “FTOS”. The experimental results show that the Fibonacci tree optimization algorithm gets a better optimistic effect than the comprehensive learning particle swarm optimization (CLPSO) algorithm and differential evolution (DE) algorithm. The FTOS strategy is superior to the fixed time scheduling strategy in achieving the scheduling objectives. It also outperforms other strategies with the same scheduling objectives such as LDAS, BS, DSS and PECAS.

This research aims to introduce a model, SectraBank, designed to mitigate cyber fraud attacks, specifically targeting SIM Swapping and Fake App schemes in mobile banking users. A quantitative methodology with an experimental design was meticulously employed to examine the rise of cyber fraud within mobile banking. The study involved a sample of 100 professionals with advanced knowledge in Information and Communication Technologies (ICTs). Surveys were utilized to measure awareness of threats and perceptions of security before and after the implementation of the proposed model. SectraBank leverages unique user identifiers such as fingerprint authentication and the International Mobile Equipment Identity (IMEI) number, in addition to geolocation and One Time Passwords (OTP) for validating electronic transactions in mobile banking. The effectiveness of the proposed model was notable, achieving a 96.1% efficacy rate in mitigating Fake App attacks and a 90.2% success rate in countering SIM Swapping attacks. These findings underscore the potential of SectraBank as a robust solution to enhance cybersecurity measures in the realm of mobile banking.

Three-phase interactions (metal-slag-argon) in ladle stirring operations have strong effects on metal-slag mass transfer processes. Specifically, the thickness of the slag controls the fluid turbulence to an extent that once trespassing a critical thickness, increases of stirring strength have not further effects on the flow. To analyze these conditions, a physical model considering the three phases was built to study liquid turbulence in the proximities of the metal-slag interface. A velocity probe placed close to the interface permitted the continuous monitoring and statistical analyses of turbulence. The slag-eye opening was found to be strongly dependent on the stirring conditions, and the mixing times decreased with thin slag thicknesses. Slag entrainment was enhanced with thick slag layers, and high flow rates of the gas phase. A multiphase model was developed to simulate these results finding a good agreement between experimental and numerical results.

The world is facing a major health crisis, the global pandemic of COVID-19 caused by the SARS-CoV-2 coronavirus, for which no approved antiviral agents or vaccines are currently available. Here we describe a collection of codon-optimized coding sequences for SARS-CoV-2 cloned into Gateway-compatible entry vectors, which enable rapid transfer into a variety of expression and tagging vectors. The collection is freely available via Addgene. We hope that widespread availability of this SARS-CoV-2 resource will enable many subsequent molecular studies to better understand the viral life cycle and how to block it.

Exploiting the linguistic knowledge of the source language for neural machine translation (NMT) has recently achieved impressive performance on many large-scale language pairs. However, since the Turkish→English machine translation task is low-resource and the source-side Turkish is morphologically-rich, there are limited resources of bilingual corpora and linguistic information available to further improve the NMT performance. Focusing on the above issues, we propose a multi-source NMT approach that models the word feature in parallel to external linguistic features by using two separate encoders to explicitly incorporate linguistic knowledge into the NMT model. We extend the word embedding layer of the knowledge-based encoder to accommodate for each word’s linguistic annotations in the context. Moreover, we share all parameters across encoders to enhance the representation ability of the NMT model on the source language. Experimental results show that our proposed approach achieves substantial improvements of up to 2.4 and 1.1 BLEU scores in Turkish→English and English→Turkish machine translation tasks, respectively, which points to a promising way to utilize the source-side linguistic knowledge for the low-resource NMT.

Rocas Atoll is a unique environment in the Equatorial Atlantic Ocean, hosting a large number of endemic species and studies on the chemical diversity emerging from this biota are rather scarce. Therefore, the present work aims to assess the metabolomic diversity and pharmacological potential of the microbiota from Rocas Atoll. A total of 76 bacteria were isolated and cultured in liquid culture media to obtain crude extracts. About one third (34%) of these extracts were considered cytotoxic against human colon adenocarcinoma HCT-116 cell line. 16S rRNA gene sequencing analysis revealed that the bacteria producing cytotoxic extracts are mainly from the Actinobacteria phylum, including Streptomyces, Salinispora, Nocardiopsis and Brevibacterium genera, and in a smaller proportion from Firmicutes phylum (Bacillus). The search in the GNPS spectral library unveiled a high chemodiversity being produced by these bacteria, including rifamycins, antimycins, desferrioxamines, ferrioxamines, surfactins, surugamides, staurosporine and saliniketals, along with several unidentified compounds. Using an original approach, molecular network successfully highlighted groups of compounds responsible for the cytotoxicity of crude extracts. DEREPLICATOR+, a recently developed in silico tool (GNPS), allowed the identification of derivatives of the macrolide novonestimycin, as the cytotoxic compounds into the extracts produced by Streptomyces BRB-298 and BRB-302. Overall, these results highlighted the pharmacological potential of bacteria from this singular Atoll.

The primary attraction of IaaS is providing elastic resources on demand. It becomes imperative that IaaS-users have an effective methodology for learning what resources they require, how many resources and for how long they need. However, the heterogeneity of resources, the diversity resource demands of different cloud applications and the variation of application-user behaviors pose IaaS-users big challenge. In this paper, we purpose a unified resource demand forecasting model suiting for different applications, various resources and diverse time-varying workload patterns. With the model, taking input from parameterized applications, resources and workload scenarios, the corresponding resources demands during any time interval can be deduced as output. The experiments configure concrete functions and parameters to help understanding the above model.

Land-use planning plays an important role in agricultural development, however it lacks tools to support planner in proposing land-use planning solutions especially, under saltwater intrusion condition in the coastal regions. This study aims to apply optimization in analyzing land-use solutions for agricultural land-use planning. In which a multi-objective optimization model is developed to optimize land-use area including land-use allocation taking into account socio-economic and environmental factors. The model has been applied in three districts of Soc Trang province, Vietnam (Long Phu, My Xuyen and Tran De) representing three ecological regions including salt water, brackish water and freshwater in the Mekong Delta of Vietnam. The results showed that two multi-objective optimization scenarios (in terms of profit, labor, environment benefits and risk reduction) have been implemented: (i) Multi-objective optimization of agricultural land-use until 2030 under normal conditions; (ii) Optimizing agricultural land-use until 2030 under climate change conditions similar to the 2016 drought and saltwater intrusion phenomenon in the Mekong Delta. The results showed that the second scenario is the option considered for implementing land-use plan thanks to the balance between good profits and minimizing economic and environmental risk. The land allocation was carried out taking into account household economic, the influence of adjacent production types, local traffic and canal systems factors to allocate optimal land-use areas. The combination of land-use optimization and spatial allocation process can help planners improve the quality of agricultural land-use planning.

As urban populations continue to grow, efficient traffic management becomes paramount in reducing congestion, enhancing air quality, and improving overall quality of life. This study addresses the critical issue of intersection efficiency through the implementation of smart green time allocation strategies at a signalized intersection equipped with two LiDAR sensors. This research aims to investigate optimal green time allocations provided by two LiDAR sensors and analyze the LiDAR results by microsimulation in AIMSUN. The research first introduces the concept of LiDAR-equipped signalized intersections and their potential to enhance traffic control precision. Two LiDAR sensors are strategically placed at the intersection of Marlboro Pike and Brooks Dr. in Coral Hills, MD, USA to capture real-time data on vehicle and pedestrian movements. The data are then processed to generate accurate and dynamic traffic profiles, ensuring the responsiveness of the green time allocation system to varying traffic conditions.The heart of this study lies in the integration of AIMSUN microsimulation with LiDAR data. Through meticulous modeling and simulation, the research explores the optimal green allocation at morning, mid-day, and afternoon peak hours’ scenarios to comprehensively assess the impact of LiDAR-enabled dynamic signal control. The findings demonstrate that smart green time allocation, informed by real-time LiDAR data and implemented through AIMSUN microsimulation, significantly enhances intersection efficiency. By adapting signal timings to real-time traffic demands, congestion, travel times, and emissions are reduced. Furthermore, this research highlighted that the optimal green time allocation in morning, mid-day, and afternoon peak hour intervals can improve the delay time by 55.3%, 59.7%, and 55.6%, respectively.In conclusion, this paper sheds light on the potential of LiDAR technology to transform intersection management. Through a case study involving two LiDAR sensors and AIMSUN microsimulation, it reveals the tangible benefits of dynamic signal control in enhancing intersection efficiency and creating more sustainable urban environments. These findings are pivotal in advancing the discourse on modern urban traffic management and promoting data-driven solutions for the challenges of today's cities.

Stand biomass in boreal forests has attained recognition for its crucial role in carbon cycling. In this study, we examined the effect of stand age on above- and belowground biomass allocation in downy birch (Betula pubescens Ehrh.) in three drained peatland sites in Central Finland. We used allometric equations to estimate individual-tree above-ground biomass and its various components, including stem wood, stem bark, living branches, leaves, and dead branches. The above-ground biomass ranged from 10.5 t ha-1 to 276.0 t ha-1 and foliage biomass from 0.009 t ha-1 to 0.6 t ha-1. We found that stand age had a strong correlation with above-ground biomass, but foliage biomass appeared to peak at the middle-aged (50 years) stand compared to the young (10 years) or mature (80 years) stands. We observed coarse root biomass production of 45, 250, and 110 g m-2 in the 0–50 cm peat layer for young, middle-aged, and mature stands, respectively. Most coarse root biomass occurred in the top 20-cm layer (77%). These findings improve our understanding of how biomass allocation patterns – specifically those in foliar biomass– change over time, and the impact on litter inputs into the soil.

The owners of forests with water protection functions in Bulgaria do not receive compensation for their limited right to use wood and non-wood forest products from the forest areas they own. At the same time, the contribution derived from forests with water protection functions is received by water users and water consumers, whereas the costs of managing the forests are borne by their owners. The problem thus defined is not a forestry one, but an economic one, and the purpose of this paper ensues therefrom, namely to propose and test a methodology for valuating the produc-tion function of forest areas with water protection function in Bulgaria, allowing a fair distribu-tion of income between the forest owner and the user of forest ecosystem services. The methodol-ogy is based on the form of forest management and the analytical expression of the economic rela-tionship between a forest owner and a user of forest ecosystem services, constructed using Schen-rock’s formula. It has been tested with actual data on forest areas with water protection functions falling within the administrative and territorial scope of Velingrad municipality and based on the obtained results proposals have been made for the distribution of the contributions generated by forest ecosystems between the forest owner and the user of the forest ecosystem services.

: In this article, the authors propose an algorithmic approach to building a model of the dynamics of economic and, in particular, innovation processes. The approach under consideration is based on a complex algorithm that includes (1) decomposition of the time series into components using singular spectrum analysis; (2) recognition of the optimal component model based on fuzzy rules, and (3) creation of statistical models of individual components with their combination. It is shown that this approach corresponds to the high uncertainty characteristic of the tasks of the dynamics of innovation processes. The proposed algorithm makes it possible to create effective models that can be used both for analysis and for predicting the future states of the processes under study. The advantage of this algorithm is the possibility to expand the base of rules and components used for modeling. This is an important condition for improving the algorithm and its applicability for solving a wide range of problems.

The present era of the Internet of Things (IoT) having intelligent functionalities in solving problems pertaining to realtime mission-critical systems has brought an immense revolution in diverse fields including healthcare and navigation systems. However, to the best of our knowledge, the potential of IoT has not been fully exploited yet in the field of the energy sector. We argue that there is an immense need to shift the traditional mission-critical electric power system architecture to IoT-based fully orchestrated architecture in order to increase efficiency, as billions of investment is reserved for the energy sector globally. Since network orchestration deals with auomating the interaction between multiple components involved to execute a particular service, therefore, scheduling the relevant processes within strict deadlines becomes the core pillar of the architecture. The mission-critical systems with urgent task execution often suffer from issues of missing task deadlines. In this study, we present a novel IoT task orchestration architecture for efficient energy management of a nanogrid system that focuses on minimizing the use of nonrenewable energy resources and maximizing the use of renewable energy resources. Moreover, major components of IoT task orchestration such as task mapping and task scheduling are also enhanced using NLP and PSO optimization modules. The proposed task scheduling algorithm incorporates the optimized surplus time, and efficiently executes the energy management-related tasks contemplating to their types. The study utilizes sensors to obtain data from physical IoT devices, including photovoltaic (PV), Energy Storage System (ESS), and diesel generator (DG). The performance of the proposed model is evaluated using data set of nanogrid houses. The outcomes revealed that IoT-task orchestration has played a pivotal role in efficient energy management for nanogrid mission-critical system. Furthermore, the comparison with state-of-the-art scheduling algorithms showed that the task starvation rate is reduced to 16% and 12% when compared with RR and FEF algorithms, respectively.

We formulate a more straightforward, symmetry-based techniques in manually computing the determinant of any n×n matrix by revisiting Dodgson’s condensation method and strategically applying elementary row operations and the definition and properties of determinants. The result yields a more simplified mnemonical algorithm than the usual reduction by elementary row operations and co-factor expansion and with minimal terminal divisions performed compared to Dodgson’s internal divisions.

The pulp and paper industry is one of the biggest industry sectors worldwide, whose market growth is expected to reach 370.12 billion USD by 2028. However, as a water-intensive process, the pulp and paper production generate huge volumes of contaminated effluents, some of which contain dissolved high-value chemical compounds, such as lignin, hemicellulose, or carboxylic acids. These compounds can be recovered using membrane operations. Thus, membrane operations represent a method to valorize effluents and byproducts from this industry sector and narrow the gap between biorefinery models and the pulp and paper production as an integrated biorefinery. The present review reviews the state-of-the-art-research and the state-of-the-art applications of membrane operations in the pulp and paper industry.

Combining wind and solar photovoltaic (PV) generation can provide complementary renewable power production, but depends on correlated resources. This study analyzed 10 years of wind data from Naama, Algeria to evaluate the potential for evening wind generation to offset the loss of solar at sunset. Average wind speeds showed a distinct increase during evening hours, coinciding with the decrease in solar irradiance. Wind turbine simulations using a 1.5 MW turbine and the wind data showed sufficient resources for profitable power production after sunset. Statistical analyses confirmed significantly higher wind speeds and simulated power output in evening vs daylight periods (p<0.05). The Pearson correlation coefficient between evening wind speeds and decreasing solar irradiance was 0.63, supporting a strong positive relationship. These findings indicate Naama has adequate wind resources to deploy economically viable wind power capacity that can complement existing solar infrastructure and provide renewable electricity after dark , .

A new algorithm is developed in this study to automatically detect reinforced concrete structures' rebar locations and diameters using the ground penetrating radar technique. The method approximates the hyperbolic signatures using two-way travel time and bi-quadratic equations. The study includes formulating electromagnetic wave speed in reinforced concrete (RC) structures. The algorithm was used in a computer code to provide an automated analysis of ground-penetrating radar data collected from a pre-planned survey grid. Two RC slabs were fabricated and tested to validate the proposed method. The proposed method is efficient in signal processing and accurately and reliably determining the rebar information.

The domain of construction engineering and management is evolving rapidly. Optimizing resource positioning is crucial for meeting the challenges of efficiency and productivity. This research presents a novel methodology that incorporates Agent-Based Modeling (ABM), Building Information Modeling (BIM), and Bluetooth Low Energy (BLE) technologies, augmented with a Client Early Warning System (CEWS) and a Decision Support System (DSS). What makes this study unique is that it provides a real-time methodology for resource allocation and project management, tailored to address the complexities of modern construction projects. The application of this integrated technological framework marks a significant leap in construction management, empowering data-driven decision-making and significantly improving project efficiency. Empirically validated through a case study at Helwan University's College of Engineering and substantiated by expert surveys, this research showcases a transformative model for resource management. The findings not only underscore the practical applicability of this approach but also open new horizons for its adoption in global construction practices, offering insights for future research endeavors focused on expanding these methodologies to a wider range of resources.

This study describes the AMD impacted environments and critically discusses the effects of AMD, current prediction and prevention methods and treatment technologies. The study further, crit-ically analyses the case studies, gaps in AMD research and the challenges and opportunities of-fered by AMD. The study outlined future technological intervention aiming at a paradigm shift towards reducing the volume of sludge generated as well as the operating cost and improving AMD treatment efficiency. The integrated AMD treatment technologies that result in a holistic approach toward sustainable AMD treatment are a current need. As a result, a sustainable AMD treatment strategy has been made possible due to water reuse and rich resource recoveries such sulphuric acid, rare earth elements, and metals. The cost of AMD treatment can be decreased with the use of recovered water and resources, which is essential for developing a sustainable AMD treatment process.

The novel COVID-19 pandemic prompted an unprecedented Institutional reaction to aggregate existing capacity from silos of research laboratories to establish a multidisciplinary research laboratory for COVID19 testing. In less than two weeks, resources were mobilized from the community to strengthen public health response and epidemic control. Such strengthening of institutional research capacity to support public health response contributes to a natural knowledge transfer, facilitates collaboration, and generates new frontiers for knowledge production that should ultimately lead to professional development and retention of skilled human resources. This report describes the pre-established mechanisms and involvement of the authors that made it possible to set-up a multidisciplinary laboratory in a remarkably short period of time. We also discuss the opportunities and sustainability of multidisciplinary laboratory research post-COVID19. Existing institutional capacity can be repurposed to establish multidisciplinary research laboratories to support the strengthening of basic and clinical translational research capacity in resource limited settings and impact on public health and scientific knowledge for socioeconomic development.

The problem of optimal scheduling in a system with parallel queues and a single server has been extensively studied in the queueing theory. However, such systems have mostly been studied by assuming homogeneous attributes of arrival and service processes, or in heterogeneous case a Markov random process was usually assumed. In this paper, we explore the possibility of combining simulation and neural network paradigms for optimal scheduling in a heterogeneous system with an arbitrary inter-arrival and service time distributions. The service of any queue by the server is exhaustive. Further routing of the server after the queue has been emptied is as instructed by the trained neural network. Any change in the queue that currently has a server is accompanied by a switching cost. The simulated annealing optimization algorithm which is used to optimize the parameters of the neural network was adapted for numerically evaluated average cost function. A Markov decision problem was formulated for the corresponding markovian queueing system to verify the results of solving the optimization problem. In addition to comparing the actual values of the average cost, the parameter values of the neural network trained on the optimal control policy of the Markov model are also used to determine the domains of parameters required for the simulated annealing defined on a finite discrete domain. Numerical analysis shows the effectiveness of this approach. Moreover, a comparison of the results for different distributions illustrates the insensitivity of the optimal control policy to the shape of the distributions for the same two first moments. Thus, the optimal control policy for an exponential model can be used as a suboptimal one for the general system.

Cellular Vehicle-to-Everything (C-V2X) is a communication technology that supports various safety, mobility, and environmental applications given its higher reliability properties compared to other communication technologies. The performance of these C-V2X-enabled Intelligent Transportation System (ITS) applications is affected by the performance of the C-V2X communication technology (mainly packet loss). Similarly, the performance of the C-V2X communication is dependent on the vehicular traffic density which is affected by the traffic mobility patterns, and vehicle routing strategies. Consequently, it is critical to develop a tool that can simulate, analyze, and evaluate the mutual interactions of the transportation and communication systems at the application level and to the evaluate the benefits of the C-V2X enabled ITS applications. In this paper, we demonstrate the benefits gained when using C-V2X Vehicle-to-Infrastructure (V2I) communication technology in an energy-efficient dynamic routing application. Specifically, we develop a Connected Energy-Efficient Dynamic Routing (C-EEDR) application using C-V2X as a communication medium in an integrated vehicular traffic and communication simulator (INTEGRATION). The results demonstrate that the C-EEDR application achieves fuel savings of up to 16.6% and 14.7% in the IDEAL and C-V2X communication cases, respectively for a peak hour demand on the downtown Los Angeles network considering a 50% level of market penetration of connected vehicles. The results demonstrate that the fuel savings increase with increasing levels of market penetration at lower traffic demand levels (25% and 50% the peak demand). At higher traffic demand levels (75% and 100%) the fuel savings increase with increasing levels of market penetration with maximum benefits at a 50% market penetration rate. Although the communication system is affected by the high density of vehicles at the high traffic demand levels (75% and 100% the peak demand), the C-EEDR application manages to perform reliably producing system-wide fuel consumption savings.The C-EEDR application achieves fuel savings of 15.2% and 11.7% for the IDEAL communication and 14% and 9% for the C-V2X communication at the 75% and 100% market penetration rates, respectively. Finally, the paper demonstrates that the C-V2X communication constraints only affect the performance of the C-EEDR application at the full demand level when the market penetration of connected vehicles exceeds 25%. This degradation, however is minimal (less than a 2.5% reduction in fuel savings).

Network slicing is a promising technology for 5G networks in which operators can sell customized services to different tenants at various prices and Quality of Services (QoS) demands. Thus, the latest 4th Generation (4G) and upcoming 5th Generation (5G) mobile technologies are expected to offer massive connectivity and management of high volume of data traffic in the presence of immense interferences from mobile networks of IoT devices. Further, it will face challenges of congestion and overload of data traffic due to the humongous number of IoT devices. Nevertheless, these devices are likely to demand high throughput, low latency, and high level of reliability especially for critical real-time applications such as in Vehicular Communication System (VCS). To address these issues in 5G mobile networks, this paper proposes a Slice Allocation Management (SAM) Model based on the critical services of smart systems such as VCS to satisfy QoS demands. The proposed model aims at providing dedicated slices on the basis of service requirements such as expected throughput and latency for VCS. To ensure such performance and provide data traffic priorities of IoT devices in the uplink of Relay Nodes (RNs) cells in the 5G mobile networks, we have sliced the Radio Access Networks (RAN), along with the assignment of the nearest Mobile Edge Computing (MEC) with isolated slices based on the priorities for each IoT nodes to reduce latency level. The proposed model was simulated and validated using the OPNET simulator. The results obtained demonstrate that SAM Model is able to achieve improvement of end to end delays and uplink throughputs of the networks in high-density networks of IoT devices.

There are abundant coal, oil and natural gas resources in "Golden Triangle" energy region. Energy resources development, coal chemical industry, coal power and other industries play an important role in promoting regional economic growth, but facing the insufficient water supply. Under the condition of marginal equilibrium of water resources, the paper firstly analyzes the water utilization, and calculates the potential water-saving amount. Then, the paper constructs a cooperative game model and allocates the newly increased GDP by using the weight distribution method. Finally, the paper puts forward some policy suggestions to reduce the efficiency gap of water utilization among regions.

We consider a general problem of optimal allocation of limited resources in a wireless telecommunication network. The users are divided into several different groups (or classes), which correspond to different levels of service. The network manager must satisfy these different users requirements. This approach leads to a convex optimization problem with balance and capacity constraints. We present several decomposition type methods to find a solution of this problem, which exploit its special features. We suggest to apply first the dual Lagrangian method with respect to the total capacity constraint, which gives the one-dimensional dual problem. However, calculation of the value of the dual cost function requires solution of several optimization problems. Our methods differ in approaches of solution of these auxiliary problems. We compare the performance of the suggested methods on several series of test problems. They show rather satisfactory convergence. Nevertheless, proper decomposition technique enhance the convergence essentially.

Automated charging technologies are becoming increasingly important in the electrification of heavy road freight transport, especially in combination with autonomous driving. This study provides a comprehensive analysis of automated charging technologies for electric heavy-duty vehicles (HDVs). It encompasses the entire spectrum of feasible technologies, including static and dynamic approaches, with each charging technology evaluated for its advantages, potentials, challenges, and technology readiness level (TRL). Static conductive charging methods such as charging robots, underbody-couplers or pantographs show good potential, with pantographs being the most mature option. These technologies are progressing towards higher TRLs, with a focus on standardization and adaptability. While static wireless charging is operational for some prototype solutions, it encounters challenges related to implementation and efficiency. Dynamic conductive charging through an overhead contact line or contact rails holds promise for high-traffic HDV routes with the overhead contact line being the most developed option. Dynamic wireless charging, although facing efficiency challenges, offers potential for seamless integration into roads and minimal wear and tear. Battery swapping is emerging as a practical solution to reduce downtime for charging, with varying levels of readiness across different implementations. To facilitate large-scale deployment further standardization efforts are required. The study emphasizes the necessity for continued research and development to enhance efficiency, decrease costs, and ensure seamless integration into existing infrastructures. Technologies that achieve this best will have the highest potential to significantly contribute to the creation of an efficiently automated and environmentally friendly transport sector.

The purpose of this study is to examine the match-related performance (scores and penalties) of the athletes in the Junior EJC (European Judo Championship) and U23 EJC categories before and immediately after the Covid-19 quarantine, according to gender and weight category groups. Our sample was based on the junior and U23, male and females, 2019-2020 Junior European Judo Championships and 2019-2020 U23 European Judo Championships. A total of 1431 matches in these tournaments were analyzed: male (n=812) and female (n=619). The main findings of this study showed that most matches in both the male and female categories resulted in ippon (2019-2020 average: 64,35% for Junior male, 70,55% for U23 male and 69,3% for Junior female, 64,4% for U23 female). No significant differences (p > 0.05) were observed between gender and age groups concerning the match scores. In the formation phase of the technique, considerations of high- and low-intensity actions, and analysis of the speed of athletes during matches in official competitions can help to better understand the dynamics of the variability of movements in judo matches. In addition, suggestions are presented to be applied to athletes in different age categories who are on the way to become Olympic athletes.

To assess the community health workers’ (CHWs) knowledge, attitude, and practices (KAP) in type-2 diabetes (T2D) and hypertension (HTN) management. We thus also sought to assess the potential health system barriers for incorporating CHWs in T2D and HTN management. Mixed-method study comprised (1) a survey among 153 active CHWs to assess their KAP of T2D and HTN, and (2) semi-structured interviews with key informants to understand challenges of the health system and proposed solutions in incorporating CHWs in T2D and HTN management. The majority of CHWs correctly answered general knowledge questions on NCDs, risk factors, and prevention; however, only one-quarter correctly answered questions on smoking, family history, or tobacco use as risk factors. Most respondents appeared to have positive attitudes and have been practicing some activities related to T2D and HTN. Both financial and non-financial resource constraints were cited as challenges of the health system; therefore, re-structuring the role definition of CHWs and task of responsibilities, and assessment the need and workload have been proposed as ways forwards to effectively incorporate CHWs in T2D and HTN care. CHWs in Cambodia have shown their potential in T2D and HTN management; however, a well-designed strategy including technical training, clearly defined roles and responsibilities, and strong supporting structure are important to maximize their potential in the health system.

In this paper, new N-way Wilkinson power dividers (WPDs) are represented by using slow-wave structures such as narrow slits loaded and meandered transmission lines. The slit loaded and meandered lines are used to represent the quarter wavelength transmission lines of a conventional WPD for size reduction. Based on the proposed approaches, 2-, 4- and 8-way power dividers are designed, simulated and fabricated. The fabricated -, 4- and 8-way circuits have been measured at the center frequencies of 2.03, 1.77, and 1.73 GHz in an excellent agreement with the predicted ones. The meandered transmission lines are also used to design new types of WPDs having novel input/output port arrangements. For this purpose, two 3-way WPDs are located at both sides of the same board so as to have different power splitting ratios at different inputs and outputs to provide alternative solutions for antenna arrays. Furthermore, a 5-way dual layer WPD is introduced by locating the meandered transmission lines to two layers. The proposed 3- and 5-way WPDs allow halving the input power at the next output port in the order of P/2, P/4, P/8, P/16, and P/16. All of the designed power halving WPDs have been simulated, fabricated and successfully tested.

How to optimally allocate COVID-19 vaccines and scarce public goods is a crucial and sensitive question to scholars, policy-makers, and practitioners. The ethical dimensions and principles of vaccine allocation between groups are widely agreed upon, whereas the ethical dimensions and principles of vaccine distribution between countries at the peak of the COVID-19 pandemic are highly controversial. This article aims to investigate how vaccines were globally allocated across countries and propose an optimal allocation mechanism for vaccines and scarce public goods. The results show that, to a certain extent, the global allocation of COVID-19 vaccines was fair and effective. Countries with more cases and deaths obtained more vaccines and vaccinations. Wealthier countries might receive more vaccinations but also suffer more severe consequences of COVID-19. Though COVAX could miss its initial vaccine delivery targets, the facility should be considered successful in its core goals and plays a critical role in controlling the pandemic. The study proposes a fair and effective mechanism of vaccine allocation that combines the roles of markets and interventions of international organizations and national governments with three degrees: emergency, priority, and market.

Considering the significant advancements in autonomous vehicle technology, research in this field is of interest to researchers. To automatic parking, controlling steer angle, gas hatch, and brakes need to be learned. Due to the increase in the number of cars and road traffic, car parking space has decreased. Its main reason is information error. Because the driver does not receive the necessary information or receives it too late, he cannot take appropriate action against it. This paper uses two phases: the first phase, for goal coordination, was used genetic algorithms and the Cuckoo search algorithm was used to increase driver information from the surroundings. Using the Cuckoo search algorithm and considering the limitations, it increases the driver’s level of information from the environment. Also, by exchanging information through the application, it enables the information to reach the driver much more quickly and the driver reacts appropriately at the right time. The suggested protocol is called the MODM-based solution. Here, the technique is assessed through extensive simulations performed in the NS-3 environment. Based on the simulation outcomes, it is indicated that the parking system performance metrics are enhanced based on the detection rate, false-negative rate, and false-positive rate.

A multi-server parallel system dispatches the incoming job, which contains kn tasks into n servers. A job is considered to be computed if all the tasks associated with the job are processed. One job’s tasks can be encoded into at least kn “replicas” such that the job is considered to be served if any kn replicas finishing computation. In this paper, we analyze the random scheduling policy of a multi-server computing system under discrete time model in terms of Quality of Exponent (QoE), which is defined as the probability exponent that a typical job can be computed within a given number of time slots. We let kn/n be a constant. Assuming that any task of any job can be randomly dispatched by a “scheduler” to any server, and computing each task takes exactly one time slot. We divide the calculation of probability exponent into two parts, exponent of numerator and exponent of denominator. For the denominator, we give the almost exact exponent using Lagrange multiplier method, while for the numerator, an upper bound of the numerator’s exponent is provided. In addition, we also express the exponent in terms of information theoretical quantities and reconsider both of exponents in the context of large deviation theory.

The one-dimensional MoS₂/carbon nanofibers (1D MoS₂/CNFs) are synthesized by electrospinning using exfoliated MoS₂ nanosheets and polyacrylonitrile as raw materials. The exfoliated MoS₂ nanosheets with size of about 150 nm are encapsulated in carbon nanofibers, and the free-standing MoS₂/CNFs can be easily cut into flexible tablet and directly used as binder-free anode for lithium storage. The resultant 1D MoS₂/CNFs exhibit a very high reversible capacity of 700 mAh g^-1 at 100 mA g^-1 after 50 cycles, high rate capacity (450 mAh g^-1 at 1000 mA g^-1 after 200 cycles) and good cycle stability.

The expansion of mankind in Space will eventually lead to the need for resource extraction on places different from Earth. For the few who would succeed, the monetary gains from space mining are promising but inevitably, such activities will bring about substantial consequences to the celestial bodies they are conducted on and to the political-economical scene of the parties involved. Thus, a new set of moral interrogatives needs to be dealt with. This paper reflects, from a utilitarian perspective, on whether it is ethical or not to exploit extra-terrestrial resources and tries to produce moral norms on the matter. The main research question is analyzed with respect to three crucial aspects: environmental consequences, interaction with possible forms of life and the political-economical setting around resource extraction in space. Reflections, argumentations, and claims are backed up or confronted with already existing theories and positions of other authors. Altogether, we concluded that the extraction and usage of the resources of another celestial body is ethical only when: 1) it is regulated enough to avoid the destruction of naturalistic, aesthetically or culturally valuable environments; 2) it does not interfere (or at least, it tries to deal) with existing or possible future forms of life, which ought to be protected with ad-hoc legislation; 3) it is regulated to prevent tensions that would likely arise between countries that want to access specific resources-rich sites, issuing laws able to avoid conflicts and a possible economic collapse. To summarize, we identified the concept of responsible innovation as the key director for future policies that will need to be established when space resource extraction becomes a reality.

Lignin has emerged as a promising eco-friendly multifunctional ingredient for cosmetic applications, due to its ability to protect against ultraviolet radiation, antioxidant, and antimicrobial properties. However, its typical dark color and low water solubility limit its application in cosmetics. This study presents a simple process for obtaining light-colored lignin (LCLig) from alkaline black liquor of sugarcane bagasse (SCB), involving an oxidation treatment with hydrogen peroxide, followed by precipitation with sulfuric acid. The physico-chemical characterization, antioxidant and emulsifying potential, safety and stability in an oil-in-water emulsion were performed. A high-purity lignin (81.6%) with improved water solubility was obtained, as result of the balance between the total aromatic phenolic units and the carboxylic acids. In addition, the antioxidant and emulsifying capacities of the LCLig were demonstrated. The color reduction treatment did not compromise the safety of lignin for topical cosmetic applications. The emulsion was stable in terms of organoleptic properties (color, pH, and viscosity) and antioxidant activity, over 3 months at 4, 25 and 40°C.

Lily database online genomic resource composed of Korean Lily Germplasm Collection, Transcriptome Sequences, molecular markers, transcription factors (TF) and DEGs data. A total of ~0.23 gb of RNA-sequences data were mined for gene identification, marker development and gene expression analysis. As a result, 47,863 SSR, 20,929 SNP and 1213 COS-marker were developed. A total of 1327 TF genes were identified and characterized. This is the first unique, user-friendly, genomic resource database for Lilium species. It is a relational database based on a ‘three-tier architecture’ that catalogs all the information in MySQL table and a user-friendly query interface and data visualization page developed using JavaScript, PHP and HTML code. The search parameters are highly flexible, user can be retrieved data by using either single or multiple search parameters. Data present in this database can be used for germplasm characterization, gene discovery, population structure analysis, QTL mapping and accelerating the lily variety improvements. This database can be accessed through this link: http://www.genomicsres.org/lilidb/.

Due to the use of structural and seismic techniques an attempt has been made in this study to determine the hydrocarbon potential and future exploration in Pakistan's Lower Indus basin area and offshore region. In addition to the possibility of hydrocarbon accumulation, the major goals of this research are to analyze structural patterns in the subsurface of the study region, identify the horizons of various formations using surface seismic, and interpret seismic lines. Seismic data has been used to find and integrate the exposed Cretaceous/Tertiary basalt at Ranikot in the lower Indus basin to the well-known Deccan basalts of the Indo-Pak plate, which is the secondary goal of the current investigation. According to the interpretation of seismic data, the Indo-Pakistan plate has experienced rifting because of tectonic activity. Graben and horst structures have been identified in the study area horizon, which indicates that the area has undergone major structural and depositional changes. While faults provide a pathway for hydrocarbons to migrate from their source to reservoir rock, grabens are principally responsible for the accumulation of hydrocarbons. We further deduce that the prior exploration failures in the area were due to a lack of knowledge of the subsurface formations and structural trends, which are essential for characterizing the hydrocarbon play and trap features. Our results can be productive for the local hydrocarbon drilling projects as well as worldwide tectonic stratigraphy studies on passive continental edges.

Cloud computing nowadays is not an emerging topic, and virtualization is an indispensable technology to expedite cloud computing to become the next sign of the coming Internet revolution. In real life, scientists never stop at exploring the possibilities from such technology by investigating millions of experiments and applications to enhance the quality of virtual services. However, isolated construction for the virtual machine doesn’t save the technology from unwanted data volumes or insensitive processing time. Containers are created to address such problems, by distributing applications without initiating the entire virtual machine. Docker, as an important player in this game, is an open-source application of the container family. The management tool from Docker containers, Swamskit, does not take heterogeneities in either virtualized containers or physical nodes. There are different nodes in the cluster, and each node is different in configurations, resource availability, or concerning resource, etc. Furthermore, the requirements initiated by different services change all the time. The demand might be CPU-intensive (e.g. Clustering services) and also memory-intensive (e.g. Web services), or completely at the opposite. In this paper, we focus on exploring the Docker container cluster and designing, DRAPS, a resource-aware placement scheme, to improve the system performance in a heterogeneous cluster.

The explosion of data has transformed the world since much more information is available for collection and analysis than ever before. To extract valuable information from the data in different dimensions, various deep learning models have been developed in the past years. Although these models have demonstrated their strong capability on improving products and services in various applications, training them is still a time-consuming and resource-intensive process. Presently, cloud, one of the most powerful computing infrastructures, has been used for the training. However, how to manage cloud computing resources and to perform the training efficiently is still challenging current techniques. For example, general resource scheduling approaches, such as spread priority and balanced resource schedulers, actually do not work well with deep learning workloads. Besides, the resource allocation problem on a cluster can be divide into two subproblems: (1) local resource optimization: improve resource configuration for a single machine; (2) global resource optimization: improve the cluster-wide resource allocation. In this thesis, we propose two novel container schedulers, FlowCon and SpeCon, that are designed to address these two subproblems respectively and specifically to optimize performance of short-lived deep learning applications in the cloud. FlowCon focuses on resource configuration of single-node in a cluster, as show that it efficiently improves deep learning tasks completion time and resource utilization, and reduces the completion time of a specific job by up to 42.06\% without sacrificing the overall system time. SpeCon targets on cluster-wide resource configuration that speculatively migrate slow-growing models to release resources for fast-growing ones. Based on our experiments, SpeCon improves makespan for up to 24.7\%, compared to current approaches.

The study was conducted in north wollo, south wollo and orimiya zone, in Eastern Amhara with an aim to assess the resource potential of Acacia seyal in the selected sites. The data from the selected sites were collected using point center quarter method. A total of 90 quadrates from nine study areas with plot size 50m*50m, (22.5ha) were systematically located along each transect, 100 m apart, and was spatially captured with the aid of GPS. At every sampling point, four quadrants (90 degrees) were created, using the transect line and a line perpendicular to it. Species composition Acacia seyal structure and its regeneration status, at points along transects were taken to analyze diversity and target species structure of the sites. The highest and least density of Acacia seyal ha^-1 were attained by Mehale mecharie (148) and Alene sefer (52). The highest shannon weiner diversity and species richness was observed in Alene sefer(Kemessie). Acacia seyal structure in all study sites showed an inverted J shape except lastie gerdao (Gubalafeto). Therefore, Acacia seyal deserves immediate conservation and appropriate management measures in order to get sustainable product and services from the species. Based on the results, awareness creation on the values and management of Acacia seyal, study on the management options of Acacia seyal for firewood, fuel wood, charcoal production and also investigation of gum production techniques of Acacia seyal for the sustainable use of the resource are recommended.

An abundance of natural resources is both an opportunity and a challenge for developing countries. Several resource-rich, low-income countries receive amounts of foreign aid that are similar to or larger than their actual or potential revenues from natural resources. In such countries, the donors may have an opportunity to help a government to use its resource revenues productively and minimize the magnitude of risks created by resource rents. Development of aid instruments tailored for such purposes might be helped by model-based analysis of the effects of foreign aid on resource-rich, low-income economies and its interactions with the flows of natural resource revenues. This paper develops a growth model à la Barro in which the government receives windfalls (from natural resources and foreign aid) and rent-seeking agents contest for public funds. The key conclusion is that making aid countercyclical helps to achieve higher economic growth, and so does conditioning disbursements on enhancement of public capital. Introducing elements of insurance in the design of both aid products financing investments in infrastructure and social services and supporting policy and institutional reforms may help to achieve both of these objectives.

In this paper, a novel permanent magnet-assisted synchronous reluctance machine (PMASynRM) with rare-earth PMs and ferrite magnets is proposed. The performance of PMASynRM is discussed with respected to the different magnet ratio of rare-earth PMs and ferrite magnets. Some characteristics including the flux density, output torque, cogging torque, output power, power factor, torque ripple, loss, efficiency, and demagnetization are calculated by 2-D finite element analysis (FEA). The analysis results show that the excellent performance can be obtained by using hybrid magnet of rare-earth PMs and ferrite magnets with the suitable magnet ratio, and provide some desirable cost-performance trade-off.

The article justifies the need to involve the technogenic deposits (off-balance ore and wastes) into the economic circulation of mining enterprises when there is natural resources depletion. It could be considered as one of the tools of the circular economy. The authors analyze global trends in the copper deposits development, global demand for copper, and design recommendations for possible alternative options for the copper production. The authors use a case of Erdenet Mining Corporation SOE based in Mongolia to develop the approach for economic, social and environmental problem-solving. The millions of mining dumps are proposed to develop as technogenic resources for recycled materials, prolonging profitable activities of the mine. The Hierarchy analysis method is used to obtain optimum order of the mining dumps development to get economic, social and environmental effect.

Given that population COVID-19 vaccination does not appreciably reduce SARS-CoV-2 transmission, instead, the potential to reduce hospitalization has been used to justify coercive vaccine passports. We aim to use a recently published research study as an example in order to demonstrate how data can be misinterpreted and result in deriving misleading ethical and policy implications. Bagshaw et al wrote that unvaccinated patients with COVID-19 in Alberta, Canada “had substantially greater rates of ICU admissions, ICU bed days, and ICU related costs than vaccinated patients did. This increased resource use would have been potentially avoidable had these unvaccinated patients been vaccinated.” The authors in Bagshaw et al then concluded that their findings “have important implications for discourse on the relative balance of increasingly stringent public health protection (restrictions), including mandatory vaccination policies, and the sustainability and function of health system infrastructure and capacity during the ongoing COVID-19 pandemic.” Here we show the following. First, the effect of vaccination on intensive care admissions were grossly over-estimated due to several limitations of this and almost all other vaccine studies. Second, an effect of vaccination on access to acute care and on all-cause excess deaths was grossly over-stated due to several more likely causes being omitted from discussion and from the common narrative. Third, policy implications were overstated and at best unclear due to missing consideration of more relevant aspects required to inform policy. Overall, the data cannot support what Bagshaw et al called “increasingly stringent public health protection (restrictions), including mandatory vaccination policies”.

Generation of unique identifiers extracted from the physical characteristics of the underlying hardware ensures the protection of electronic devices against counterfeiting and provides security to the data they store and process. This work describes the design of an efficient Physical Unclonable Function (PUF) based on the differences in the frequency of Ring Oscillators (ROs) with identical layout due to variations in technological processes involved in the manufacture of the integrated circuit. The logic resources available in the Xilinx Series-7 programmable devices are exploited in the design to make it more compact and achieve an optimal bit-per-area rate. On the other hand, the design parameters can also be adjusted to provide a high bit-per-time rate for a particular target device. The PUF has been encapsulated as a configurable Intellectual Property (IP) module, providing it with an AXI4-Lite interface to ease its incorporation into embedded systems in combination with soft- or hard-core implementations of general-purpose processors. The capability of the proposed RO-PUF to generate implementation-dependent identifiers has been extensively tested, using a series of metrics to evaluate its reliability and robustness for different configuration options. Finally, in order to demonstrate its utility to improve system security, the identifiers provided by RO-PUFs implemented on different devices have been used in a Helper Data Algorithm (HDA) to obfuscate and retrieve a secret key.

Wild Chinese prickly ash with elevated antioxidants is a valuable genetic resource for Zanthoxylum bungeanum Maxim improvement. There are rich wild germplasm resources in the Qinling Mountains. In a study with wild germplasm resources from different altitudes and six cultivated varieties, the phenolic and flavonoid compounds were analyzed by high performance liquid chromatography (HPLC). The chromatograms of them were basically the same, although their chemical composition content was greatly different. The thirty samples were divided into three categories through the hierarchical clustering analysis. And catechin, hyperoside and quercitrin were considered to be key compound for the quality evaluation, by contrast, the wild samples with an altitude of 2300±50 m (Ⅳ group) had the highest content of key compounds, and showed stronger antioxidant activity and antibacterial ability, indicating that these wild samples could be used as an excellent breeding resource. This is the first time to evaluate the quality of wild Chinese prickly ash in different altitude areas of Qinling Mountains. These excellent wild germplasm resources provided substantial potential accessions for use directly in Chinese prickly ash breeding programs.

Background: The epidemiological situation generated by COVID-19 has cast into sharp relief the delicate balance between public health priorities and the economy, with businesses obliged to toe a line between employee health and continued production. In an effort to detect as many cases as possible, isolate contacts, cut transmission chains and limit the spread of the virus in the workplace, mass testing strategies have been implemented in both public health and industrial contexts to minimize the risk of disruption in activity. Objective: To evaluate the economic impact of mass workplace testing strategy as carried out by a large automotive company in Catalonia in terms of health and healthcare resource savings. Methodology: Analysis of health costs and impacts based on the estimation of mortality and morbidity avoided because of screening and the resulting savings in healthcare costs. Results: The economic impact of the mass workplace testing strategies (using both PCR and RAT tests) was approximately €10.44 per test performed or €5,575.49 per positive detected. 38% of this figure corresponds to savings derived from better use of health resources (hospital beds, ICU beds and follow-up of infected cases), while the remaining 62% corresponds to improved health rates due to avoided morbidity and mortality. In scenarios with higher positivity rates and a greater impact of the infection on health and the use of health resources, these results could be up to ten times higher (€130.24 per test performed or €69,565.59 per positive detected). Conclusion: In the context of COVID-19, preventive actions carried out by the private sector to safeguard industrial production also have concomitant public benefits in the form of savings in healthcare costs. Thus, governmental bodies need to recognize the value of implementing such strategies in private settings and facilitate them through, for example, subsidies.

Although the dockless bike-sharing system, which can be regarded as a typical example of the resource-sharing system, has been increasingly popular for years with people especially in China, the imbalanced distribution of shared bikes gradually becomes a major problem for both bike-sharing companies and their customers. To solve the imbalance problem, we aim to investigate the long-term performance of a system under the influence of some key factors (with an emphasis on the unequal demand between different nodes), which can guide us to discover the causes of the problem and offer several valuable suggestions to the operators. According to the fundamental principle of a dockless bike-sharing system, we propose a model reduction method to reduce the complexity of the theoretical network models, which are developed based on the Markovian queueing theory with the consideration of higher-demand nodes and lower-demand nodes. The theoretical network models provide us with steady-state probabilities of having a certain number of bikes at one node, which are used as an important part of the optimization model for solving the imbalance problem by carrying out an operator-based relocation strategy. The objective of the optimization model is to maximize the total profit and determine the optimal relocation frequency. It is found that most of the shared bikes are possible to gather at one low-demand node eventually in the long run under the influence of the different arrival rates at different nodes, but the decrease of the number of bikes at the high-demand nodes is more sensitive to the unequal demands and may cause a great loss for operators, which should be payed attention to especially when solving the relocation problems.

The past few decades have been characterized by a growing body of profit-seeking public service areas with the understanding that profit-seeking organizations will deliver public services more efficiently than government can. These sectors include, but are not limited to, health care, corrections and education. Governments have created quasi markets to attract private providers of services in these sectors, with varying results. Organizational economics has provided the primary explanation for quasi markets, but questions about the sought-for efficiencies actually realized through these markets persist. We integrate resource dependence theory and organizational economics to provide a more comprehensive explanation of the persistence of quasi markets.

The objective of this study is to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the equivalence ratio distributions and the injected fuel droplet behavior in the cylinder of the RCCI engine. The spray simulation was conducted by dividing two-part. First, the spray validation simulations progressed to find the spray-influenced factor of the test injector. Next, the engine simulations were performed with the spray-influenced factor obtained from spray validation simulations to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the injected fuel atomization and the equivalence ratio distributions. The introduced total heating value was fixed at 595J based on the lower heating value of diesel 14mg. The heating value of the premixed ethanol ratio varied from 0% to 40% based on the same total heating value in-cylinder in steps of 10%. It was revealed that when the premixed ethanol ratio based on the same total heating value in-cylinder was increased, the spray tip penetration value was reduced from the time after 4deg of diesel injection start because of the short injection duration by the small amount of diesel fuel. The SMD value was also more enormous up to 32.58% with increasing the premixed ethanol ratio because of the low kinetic energy of the injected fuel by the short injection duration and the slow evaporation of the injected fuel by the low cylinder temperature.

The effects of rare earth Ce on the microstructure and properties of cast pure copper were investigated through thermodynamic calculations, XRD analysis, mechanical testing, metallographic microscopy, and scanning electron microscopy (SEM). The experimental results demonstrate that the reaction between rare earth Ce and oxygen as well as sulfur in copper exhibits a significantly negative Gibbs free energy value, indicating a strong thermodynamic driving force for deoxidation and desulfurization reactions. Ce is capable of removing trace amounts of O and S from copper. Moreover, the maximum solid solubility of Ce in Cu falls within the range of 0.009% to 0.01%. Furthermore, Ce can refine columnar grains while enlarging equiaxed grains in as-cast copper.Upon addition of rare earth Ce, the tensile strength increased by 8.45%, elongation increased by 12.1%, and microhardness rose from 73.5HV to 81.2HV-an increase of 10.5%. Overall, rare earth Ce has been found to enhance both the microstructure and mechanical properties of cast pure copper.

This paper describes the load capacity of short fiber-reinforced polymer lugs with Ti-6Al-4V selective laser-melted bushings with the original embedded element surface roughness and after sandblasting and vibratory finishing. Lugs are an important part of pin-joints. Adhesion between PA6 and SLM produced titanium is not fully studied. The cohesive zone material Mode II model parameters were calibrated experimentally by extruding a cylindrical bushing along the lug axis. The values of the maximum equivalent tangential contact stress were fitted for cases with investigated embed element roughness. The critical fracture energy for tangential slip was also estimated. Validation of the constructed CZM Mode II models with the results of strength experiments was performed. In both the experiment and the calculation, greater bushing roughness provides greater lug load-bearing capacity. The presented models can be used for the preliminary evaluation of SFRP PA6 parts with titanium embedded elements bearing capacity.

Ensemble fuzzing in parallel with heterogeneous fuzzers has been proposed to leverage the advantages of diverse fuzzers and improve testing efficiency. However, in current ensemble fuzzing methods, the collaboration among different fuzzers is achieved solely by synchronizing the seeds discovered by each fuzzer. This results in a high likelihood of different fuzzers choosing the same seeds and creating a large number of equivalent testcases, thus reducing overall fuzzing efficiency. Meanwhile, the existing task division method proposed by AFLTeam is highly coupled with the fuzzer specially designed for it, making it challenging to apply to ensemble fuzzing directly. So, in this paper, we proposed a callgraph-based task division method suitable for ensemble fuzzing. Firstly, we divided the target program’s callgraph into subgraphs (subtasks) balancing expected workloads. Then, we divided the global seed corpus into sub-corpora, each corresponding to a subtask, making fuzzers easily accept the subtasks. Finally, we designed synchronization mechanisms for coverage bitmaps and seeds to realize the collaborative fuzzing among different fuzzers, and a cyclic subtask scheduling strategy to fully leverage the benefits of ensemble fuzzing. We have implemented a prototype called TAEF. The evaluation results show that in the best-case scenario, our method has up to 24% more branch coverage than previous work.

In swarm-robotics foraging, the purpose of task allocation is to adjust the number of active foraging robots dynamically based on the task demands and changing environment. It is a difficult challenge to generate self-organized foraging behavior in which each robot can adapt to environmental changes. To complete the foraging task efficiently, this paper presents a novel self-organized task allocation strategy known as the dynamic response threshold model (DRTM). To adjust the behavior of the active foraging robots, the proposed DRTM newly introduces the traffic flow density, which can be used to evaluate the robot density. First, the traffic flow density and the amount of obstacle avoidance are used to adjust the threshold which determines the tendency of a robot to respond to a stimulus in the environment. Then, each individual robot uses the threshold and external stimulus to calculate the foraging probability that determines whether or not to go foraging. Simulation and physical experiments are carried out to evaluate the performance of the proposed method. The experimental results show that the DRTM is superior to and more efficient than the adaptive response threshold model (ARTM) in swarm foraging.

Project logistics is one of the specific logistics operations. Compared to other logistics operations, it needs more efficient planning and engineering applications in each operational process. On the other hand, each project logistics operation can be defined as tailor-made operations, since it has no similarity with other operations. Consequently, each project logistics operation should be planned and carried out according to its own conditions and parameters. This study focuses on the simulation of project logistics operations under the light of computerized applications from start to finish of the logistics operation. In this study, transportation operations of 600 tons of autoclave from the Petkim port to the Gördes building site were selected as a case study.

Abstract: Safety issues related to the electrification of more electric aircraft (MEA) need to be addressed because of the increasing complexity of aircraft electrical power systems and the growing number of safety-critical sub-systems that need to be powered. Managing the energy storage systems and the flexibility in the load-side plays an important role in preserving the system’s safety when facing an energy shortage. This paper presents a system-level centralized operation management strategy based on model predictive control (MPC) for MEA to schedule battery systems and exploit flexibility in the demand-side while satisfying time-varying operational requirements. The proposed online control strategy aims to maintain energy storage (ES) and prolong the battery life cycle, while minimizing load shedding, with fewer switching activities to improve devices lifetime and to avoid unnecessary transients. Using a mixed-integer linear programming (MILP) formulation, different objective functions are proposed to realize the control targets, with soft constraints improving the robustness of the model. Besides, an evaluation framework is proposed to analyze the effects of various objective functions and the prediction horizon on system performance, which provides the designers and users of MEA and other complex systems with new insights into operation management problem formulation.

(1) Background: The aim of the research was to present and emphasize the importance of magnetic resonance imaging (MRI) in diagnosing Achilles tendon (AT) ruptures by presenting case reports. (2) Materials and Methods: The sample of respondents included 7 patients (4 males and 3 females, 2 athletes and 5 non-athletes), aged 25 to 58 years, with AT injuries, who were examined and treated at the Institute for Treatment and Rehabilitation "Niška Banja", Niš, Serbia. Ankle examinations with MRI were conducted using the Esaote O-scan 0.3 T machine. The examinations were performed without the application of a paramagnetic contrast agent and without the use of anesthesia. Results: The MRI method's sensitivity and overall diagnostic accuracy were excellent, with 100% true positives. In our study, the method accurately detected the presence, location, and severity of AT injuries in all cases. MRI is an important and reliable method for detecting AT injuries, classifying them, monitoring the course of recovery, and assessing the effects of therapy. Conclusions: An unrecognized or delayed diagnosis of an AT injury can lead to chronic changes. Timely diagnosis (clinical examination, ultrasonography, magnetic resonance imaging) and appropriate treatment (conservative or operative) enable patients to return to normal activities, including sports. Unfortunately, the use of MRI is limited by restricted access and the cost of the examination.

Micro-grids’ operations offer local reliability; in the event of faults or low voltage/frequency events on the utility side, micro-grids can disconnect from the main grid and operate autonomously while providing the continued supply of power to local customers. With the ever-increasing penetration of renewable generation, however, the operations of micro-grids become increasingly complicated because of the associated fluctuations of voltages. As a result, transformer taps are adjusted frequently, thereby leading to the fast degradation of expensive tap-changer transformers. In the islanding mode, the difficulties also come from the drop of voltage and frequency upon disconnecting from the main grid. To appropriately model the above, the nonlinear AC power flow constraints are necessary. Computationally, the discrete nature of tap-changer operations and the stochasticity caused by renewables add two layers of difficulty on top of a complicated AC-OPF problem. To resolve the above computational difficulties, the main principles of the recently-developed "l1-proximal" Surrogate Lagrangian Relaxation are extended. Testing results based on 9-bus system demonstrate the efficiency of the method to obtain the exact feasible solutions for micro-grid operations thereby avoiding approximations inherent to existing methods, while demonstrating that through the optimization, 1. the number of tap changes is drastically reduced, and 2. the method is capable of handling networks with meshed topologies.

Currently, the textile industry is a poorly automated sector, due in part to problems in the handling of deformable leather and textile parts during production operations. In this work, several problems in the handling process of leather and textile parts are addressed, introducing methods to increase the automation of the process. A pneumatic actuator designed to pick up textile or leather parts avoiding their deformation during transport has been developed. This actuator maximizes the number of gripping points to improve handling, making it more stable and efficient. Additionally, a vision system has been implemented in the part picking task which, in conjunction with the CAD information of the part, sends the modified gripping position of the part to the robot. This allows customized handling of each textile or leather part. Finally, validation tests have been carried out on this development, both in simulations and in laboratory conditions, demonstrating its viability and direct applicability in the production line.

The management of an organization's human resources is the first stage in the governance process for any operation. This present study examine the strategies employed in Saudi Arabia for establishing effective governance through the implementation of human resource management practices and the key sustainable strategies criteria for effective human resource management practices. This step is considered crucial in governance as it involves the selection of highly qualified individuals who are expected to contribute to the achievement of optimal governance outcomes and the overall well-being of the population within a nation as well as the key criteria involves. Qualitative research methodology as well as Decision making trial and evaluation laboratory (DEMATEL) were utilized with a sample of 31 participants from 8 government ministries and 14 companies in Saudi Arabia. The study's findings from qualitative interview exert four key criteria influencing sustainable effective human resources management practices. Cultural reflection" is the most important long-term goals of Saudi Arabia's HRM initiatives found from DEMATEL evaluation impacting three criteria with7.9181, 8.2294, 8.1961 above the threshold value of 7.783599781. This means that HR professionals should take the time to study and evaluate the cultural dynamics at work, in order to promote cultural introspection and understanding of cultural differences.

Objectives: Our objective was to assess employer preparedness to protect their employees’ health and safety and promote their well-being in the face of potential disasters in a sample of Northeast United States employers. We developed survey instrument and index based on our model of Total Worker Health® (TWH) Employer Preparedness.Methods: We conducted a 40-question on-line survey with the membership of the Northeast Human Resources Association (US). Human resource managers reported their perceptions of their employers’ preparedness in seven domains: planning, human resources policies, hazard reduction, training, staffing, communications, and resources for resilience. Respondents were categorized by size, sector and reach and their responses scored.Results: Seventy-six individuals representing a diverse group of employers responded to the survey. Mean preparedness was “moderate,” with almost an equal number reporting a high level of preparedness as no preparedness. Employers were most prepared for severe weather events and least prepared for acts of violence. There were no significant differences by sector, size, or reach, although the healthcare sector was more prepared than others.Conclusions: There is a range of TWH® Employer Preparedness among Northeast US employers. The survey and model are important tools that can aid employers in the face of growing threats to “business as usual.”

The resource curse indicates that economic growth performs poorly in countries with significant natural resources. Nevertheless, certain countries rich in energy managed to protect their resource riches in the long run. It is necessary to enforce effective policies in resource-rich countries to fully leverage the advantages which can come from the abundance of natural resources. This study aimed to evaluate how oil-rich countries would avoid resource flows by successful fiscal and management policies. By taking the guidance of Norway and implementing fiscal policy focused on tax rules on its oil management, it is proposed that oil-exporting countries benefit significantly. The framework attempts to mitigate this resource curse and utilise oil revenues in the interest of the country.

The objective of this paper was to give an overview of the expressed preference (EP) techniques of environmental valuation. These methods offer estimation of the value of a resource not necessarily willingness to pay (WTP) or willingness to Accept (WTA) compensation rather upper and lower values. The method of measuring individuals’ willingness to pay is usually based on contingent valuation method (CVM). This research focuses on defining, categorizing, and applicability of various environmental valuation techniques that have been and can be applied in attaching value to a given resource using expressed/Revealed preference methods. The study serves as a supplementary synthesis and discussion to the board of knowledge of resource valuation methods. More specifically, selected methods to discussed herein include; contingent valuation method, hedonic pricing model, travel cost method, trade-off game method, the costless-choice method, Delphi method, Replacement Cost Method, Relocation Cost Method, Opportunity cost method, and Cost-benefit Method. In the last part, applicability of the methods is fully illustrated to support future studies on resource valuation.

A small proportion of health care users are recognised to use a significantly higher proportion of health system resources, largely due to systemic, inequitable access and disproportionate health burdens. These high-resource health system users are routinely characterised as older, with multiple comorbidities, and reduced access to adequate health care. Geographic trends also emerge, with more rural and isolated regions demonstrating higher rates of high-resource use than others. Despite known geographical discrepancies in health care access and outcomes, health policy and research initiatives remain focused on urban population centers. To alleviate mounting health system pressure from high-resource users, their characteristics must be better understood within the context in which it arises. To examine this, a scoping review was conducted to provide an overview of characteristics of high-resource users in rural and remote communities in Canada and Australia. In total, 21 papers were included in the review. Using qualitative thematic coding, primary findings characterised rural high-resource users as those of an older age; with increased comorbid conditions and condition severity; lower socioeconomic status; and elevated risk behaviours.