Tourism is increasingly becoming one of the most important components of the economy. Coastal tourism is of particular importance in our country, this is because Albania has a very favorable geographical position. The tourist destination chosen for study in this paper is Durrës. It is analyzed as a complex dynamic system that evolves with a series of techniques and methods drawn from the area of network theory. The main objective of this paper is the comparison of technological and socio-economic networks, through different methods and techniques. The methodology of this research includes different data collection methods for both networks and their analysis. 504 nodes were taken into consideration. A significant part of the research is based on network theory, using algorithms and network analysis techniques to reveal their static and dynamic characteristics. Through this paper we show that the internet network and the socio-economic network of Durrës are similar in some aspects and have a great impact on the development of the tourist destination. The analysis of these two networks provides a deeper picture of the relations between the actors of the destination and helps to improve the tourism strategies and the economic development of the area. Thus, the research is an attempt to better understand the impact of technological and socio-economic networks in the development of the tourist destination of Durrës and uses different ways of network analysis to discover the similarities and differences between them.

Taxes on the consumption of certain products have played a key role in public revenue analysis in European countries. This work aims to assess the differences in tax planning on new non-combustion products across some European territories. Through theoretical analysis, the paper has three distinct aspects. Firstly, we show the taxpayer profile in different countries. Secondly, the study analyzes the risks for the health system and the individual. Thirdly, the design of the land tax is based on previous experience and planning in Europe. This paper concludes with a case study for different countries: 1) Spain “vapers” and “smokers”, where the analysis is based on micro-data from the European Health Interview Survey 2020. 2) Sweden with the analysis of snus, shows it as a practice to reach economic savings while decreasing economic costs thanks to the nudging of consumers towards better products. The results show taxation and, specially, land taxation, should consider differences in planning in the case of new products, such as the non-combustion products, given the user per capita income and the potential lower health risks involved.

A descriptive epidemiological study has been conducted using hospital database of Teaching Veterinary Hospital (TVH) at Jhenaidah Government Veterinary College (JGVC) from July 2018 to June 2019. The study aimed to estimate the proportionate prevalence of different livestock and poultry diseases along with their spatiotemporal distribution and drug prescribing pattern. A total of 960 clinical cases were recorded during the study period. Ectoparasitic cases were proportionately higher in cattle (25.2%), whereas Peste des Petits Ruminants (PPR) cases were more frequent in goat (53.4%). The proportionate prevalence of other cases in cattle was Fascioliasis (14.3%), Myiasis (11.2%) and Foot and Mouth Disease (FMD) (7.2%). The proportionate prevalence of other cases in goats were vitamin and mineral deficiency (12.3%), bloat (5.2%), abscess (4.7%), and dog bite (1.2%). Again, the proportionate prevalence of poultry diseases was Infectious Bursal Disease (41.2%), salmonellosis (33.4%), fowl cholera (13.7%) and pox (7.8%). Most of the cattle cases were highly prevalent during the summer season except fascioliasis. In goat, PPR was predominated in the rainy season whereas myiasis was in the winter. Around 92% of disease cases were spatially located within the 2.5 km radius of the TVH of JGVC where only 0.9% of disease cases came from >10km away from TVH of JGVC. Simple linear regression identified a significant relation (p=0.01) with the distance and number of diseased animals came to the hospital. Antimicrobials belonging to b-Lactam group were most frequently prescribed for both poultry (48.6%), cattle (32.5%) followed by goat (9.2%), however sulfar drugs (34.8%) were commonly prescribed for goat cases. This type of study is very novel in Jhenaidah region of Bangladesh that might contribute to the researchers for further investigation.

In this article, a novel hybrid welding process called plasma-TIG coupled arc welding was proposed to improve the efficiency and quality of welding by utilizing the full advantage of plasma and TIG welding processes. The two arcs of plasma and TIG were pulled into each other into one coupled arc under the effect of Lorentz force and plasma flow force during welding experiments. The arc behavior of coupled arc was studied by means of it’s arc profile, arc pressure and arc force conditions. The coupled arc pressure distribution measurements were performed. The effects of welding conditions on coupled arc pressure were evaluated and the maximum coupled arc pressure was improved compared with single-plasma arc and single-TIG arc. It was found that the maximum arc pressure was mainly determined by plasma arc current and plasma gas flow. According to the results, the proposed coupled arc welding process have both advantages of plasma arc and TIG method, and it has a broad application prospect.

Paramacrobiotus species has been described from almost every corner of the world. To date 45 species have been reported from this genus. The species’ presence in different climatic conditions and habitat provides evidence of their adaptation to various harsh environments. In this review, we provide a concise summary of changes observed due to various cryptobiotic conditions in many species of this genus, geographical distribution of all the species, feeding behaviour, life history, microbiome community, Wolbachia endosymbiont identification, reproduction, phylogeny and general taxonomy of the species from genus Paramacrobiotus. Furthermore, we provide a new diagnostic key to the genus Paramacrobiotus based on the morphological and morphometric characters of adults and eggs.

Four decades of snooker rankings are analyzed in terms of prize money distributions. In particular, it is investigated how much these rankings are dominated by the top players, and also by players from the UK. The main conclusions are that (1) with an increasing total amount of available prize money, the rankings are less dominated by the top players, and (2) players from the UK have historically earned a significantly larger share of the available prize money than could reasonably be expected based on the overall percentage of UK players.

Original and improved version of the Hardy Cross iterative method with related modifications are today widely used for calculation of fluid flow through conduits in loops-like distribution networks of pipes with known node fluid consumptions. Fluid in these networks is usually natural gas for distribution in the municipalities, water in waterworks or hot water in district heating system, air in the case of ventilation systems in buildings or mines, etc. Since, the resistances in these networks depend of flow, problem is not linear like in electrical circuits, and iterative procedure must be used. In both version of the Hardy Cross method, in original and in the improved one, initial results of calculation in iteration procedure is not flow, but rather the correction of flow. Unfortunately, these corrections should be added to or subtracted from a flow calculated in previous iteration according to complicate algebraic rules. After the here presented node-loop method, final results in each of the iterations is flow directly rather than flow correction. In that way complex algebraic scheme for sign of flow correction is avoided, while the final results still remain unchanged. Numbers of required iterations for the same results are comparable with the improved Hardy Cross method.

Microstructured optical fibres (MOFs) are a new type of optical fibres that possess a wide range of optical properties and many advantages over common optical fibres. Those are provided by unique structures defined by a pattern of periodic or quasi-periodic arrangement of air holes that run through the fibre length. In recent years, MOFs have opened up new possibilities in the field of optics and photonics, enabling the development of advanced devices and novel optical systems for different applications. The key application areas of PCFs vary from telecommunications and high-power energy transmission to quantum optics and sensing. The stack-and-draw method is a standard manufacturing technique for MOFs, where a preform is first manually created and then drawn in a high-tech furnace into a fibre with the required final dimensions and position of the air holes. Since in the manufacturing process experimenters can control only a few parameters, mathematical models and numerical simulations of the drawing process are highly requested. They not only allow to deepen the understanding of physical phenomena occurring during the drawing process, but they also accurately predict the final cross-section shape and size of the fibre. In this manuscript, we assume thermal equilibrium between the furnace and the fibre and propose a functional form of the fibre temperature distribution. We utilise it with asymptotic mass, momentum, and evolution equations for free surfaces already available in the literature to describe the process of fibre drawing. By doing so, the complex heat exchange problem between the fibre and the furnace need not be solved. The numerical results of the whole asymptotic model overall agree well with experimental data available in the literature, both for the case of annular capillaries and for the case of holey fibres.

Proposed in 1889 by Svante Arrhenius, the Arrhenius equation is an important result in physical chemistry which aims to find the relationship between temperature and reaction rates. It is also an essential equation for analytic chemistry which helps to determine the energy barrier for a given reaction. In this article, we will go through a detailed derivation of the exponential factor in the Arrhenius Equation based on the Boltzmann distribution of particle energy probability. Then, we will attempt to model the pre-exponential factor in accordance with the principles of collision theory for bi-molecular reaction with gaseous reactants. Understanding the basic principles of chemical reaction provides valuable tools to analyze complex reaction mechanisms in the perspective of optimizing existing industrial processes.

The campuses of Nigerian universities especially the old ones, like the University of Ibadan, comprise old trees which can pose a threat to pedestrians, structures, and roads within the school environments. However, there is no adequate information on these avenue trees thereby impeding their sustainable management. Therefore, this study provides the basic information needed by developing a geodatabase for the avenue trees along Benue, Emotan and Oduduwa roads within the University of Ibadan, Ibadan, Nigeria. The coordinates of all the avenue trees, and some within the selected roads were obtained. Tree growth data collected include; diameter at the breast height (dbh), diameter at the base, middle and at the top, crown height, crown diameter, and total height of all the avenue trees. Tree visual evaluation for diseases (TVED) was carried out for root decay, and termite attack on any part of the tree (stem, leaves and visible part of the root). Risk rate was assessed as low, medium and high, depending on the potential target (human, vehicles, structures). The risk rate depended on the incidence of leaning towards a building or road, cracked branches, root attack by termites, basal decay or branch decay. The growth data were used to compute the tree volume while the avenue trees were georeferenced. The physical health status of the avenue trees was determined using TVED data. The spatial distribution of the avenue trees was developed in GIS while all the analysed data were pulled together to develop a geodatabase for the avenue tress using design templates of BOOTSTRAP, comprising of Hypertext Markup Language, Cascade Style Sheets, JavaScripts and Hypertext Preprocessor. A total of 121 individual avenue trees belonging to 14 species were identified in the study area. The analysis of the geospatial distribution shows that Emotan Road had a lesser spatial distribution of avenue trees compared to Benue and Oduduwa roads. Furthermore, the health risk assessment of the trees in the study area indicated that 17.35% of the individual avenue trees had defects. The database created is user-friendly, suitable and has the ability for easy data storage and quick information retrieval on the avenue trees to enhance their maintenance and risk management. This can be accessed using the link http://159.203.29.155/rebs/rebs.php.

As a model for economic and ecological systems, replicator dynamics represents a basic form of agent competition for finite resources. Here, we investigate the effects of stochastic resetting in this kind of processes. Random reset events abruptly lead individual resources to a small value from which dynamics must start anew. Numerical results show that resource distribution over the population of competing agents develops highly nonuniform profiles, exhibiting clustering and fluctuations with anomalous dependence on the population size. This non-standard statistical behavior jeopardizes an analytical treatment based on mean-field assumptions. We propose alternative simplified analytical approaches which provide a stylized description of entropy evolution for the clustered distribution of resources and explain the unusually slow decrease of fluctuations.

The fungal order Entomophthorales in the Zoopagomycotina includes many fungal pathogens of arthropods. This review explores five genera in the Erynioideae subfamily, namely Erynia, Furia, Pandora, Strongwellsea, and Zoophthora. This is the largest subfamily in the Entomophthorales including 125 described species. The species diversity, global distribution, and host range of this subfamily are summarized, revealing that relatively few taxa are geographically widespread, and few have broad host ranges, contrasting with a large number of species with single reports, from one location and one host species. The insect orders infected by the greatest numbers of species are the Diptera and Hemiptera. Across the subfamily relatively few species have been cultivated in vitro and those that have require more specialized media than any fungi. Given their potential to attack arthropods and in the fungal evolutionary tree, which species might be adopted for biological control purposes or biotechnological innovations are highlighted. Current challenges in the implementation of these species in biotechnology include the limited ability or difficulty in culturing many in vitro, a correlated paucity in genomic resources, and considerations regarding the host ranges of different species.

This paper presents the experimental and numerical studies of the vertical stress distribution beneath the centerline of circular footings resting on the sand. Vertical stress values due to circular load in medium-dense sand were measured using soil stress transducers. Reduced-scale laboratory model tests were carried out in a square-shaped test box and vertical stresses were measured at the centerline of the circular footing at different depths of the sand. In order to determine the effect of footing width on vertical stress distribution, laboratory experiments were performed on circular footings of different diameters. In addition, a series of finite element analyses was carried out on the test model to validate the findings of the experimental study. In the numerical analysis, the sand was modeled as a non-linear elastoplastic material. The analyses were performed using the finite element method with two-dimensional axisymmetric and three-dimensional conditions. The results obtained from laboratory model tests and numerical analysis were compared with the vertical stress values obtained from the theoretical solution in the literature. Vertical stress distribution in horizontal planes at any depth from the footing base shows the same characteristic form in all methods. However, some differences were observed between experimental, numerical, and theoretical results and discussed.

The greater U.S. Midwest is on the leading edge of tick and tick-borne disease (TBD) expansion, with tick and TBD encroachment into Illinois occurring from both the northern and the southern regions. To assess historical and future habitat suitability of four ticks of medical concern within the state, we fit individual and mean-weighted ensemble species distribution models for Ixodes scapularis, Amblyomma americanum, Dermacentor variabilis, and a newly invading species, Amblyomma maculatum using a variety of landscape and mean climate variables for the periods of 1970-2000, 2041-2060, and 2061-2080. Ensemble model projections for the historical climate were consistent with known distributions of each species but predicted the habitat suitability of A. maculatum to be much greater throughout Illinois than what known distributions demonstrate. Presence of forest and wetlands were the most important landcover classes predicting occurrence of all tick species. As the climate warmed, the expected distribution of all species became strongly responsive to precipitation and temperature variables, particularly precipitation of the warmest quarter and mean diurnal range, as well as proximity to forest cover and water sources. The suitable habitat all species was predicted to shrink in the 2050 climate scenario, and then increase more broadly statewide in the 2070 scenario, but at reduced likelihoods. Predicting where ticks may invade and concentrate as the climate changes will be important to anticipate, prevent, and treat TBD in Illinois.

Factorization reduces computational complexity and is therefore an important tool in statistical machine learning of high dimensional systems. Conventional molecular modeling, including molecular dynamics and Monte Carlo simulations of molecular systems, is a large research field based on approximate factorization of molecular interactions. Recently, the local distribution theory was proposed to factorize global joint distribution of a given molecular system into trainable local distributions. Belief propagation algorithms are a family of exact factorization algorithms for trees and are extended to approximate loopy belief propagation algorithms for graphs with loops. Despite the fact that factorization of probability distribution is their common foundation, computational research in molecular systems and machine learning studies utilizing belief propagation algorithms have been carried out independently with respective track of algorithm development. The connection and differences among these factorization algorithms are briefly presented in this perspective, with the hope to intrigue further development in factorization algorithms for physical modeling of complex molecular systems.

This paper discusses and reviews the current taxonomic status and zoogeographical distribution of the mammals of Yemen. Data were collected from previous literature in addition to field observations during 2017–2018. This checklist includes 100 species of wild (terrestrial and marine) mammals currently occurring and those that went extinct within the last century in Yemen. Only wild mammals were included and domesticated species were excluded. These 100 species belong to 11 orders, 28 families, and 64 genera. In this paper, the current status and distribution of three Erinaceomorphs, seven Soricomorphs, 34 Bats, 16 Carnivores, seven Artiodactyls, one Lagomorph, 20 Rodents, one Hyracoidea, nine Cetaceans, one Sirenia, and one Primate were reported. According to the evaluation of the International Union for the Conservation of Nature and Natural Resources (IUCN): 70 species were listed as Least Concern (LC), two as Extinct (EX), one as Critically Endangered (CR), two as Endangered (EN), eight as Vulnerable (VU), five as Near Threatened (NT), and 12 as Data Deficient (DD). This paper also discusses the current main threats to the wild mammals in Yemen.

When a microgrid is grid-tied to a distribution system, it can provide surplus power generation to the distribution system, if any abnormality or interruption occurs in the distribution system, the microgrid can operate in standalone mode to isolate the impact of the abnormality or interruption. However, if the microgrid can not collect enough information from the distribution system, it may cause the failure of generation transferring of distribution feeders, or even further influence the stability of the distribution system. In this paper, a strategy for the resilient control of a microgrid is proposed. It can solve the above-mentioned problem, reduce the duration of the outage of loads. This strategy is experimented in the microgrid in the Institute of Nuclear Energy Research (INER), the reliability is also analyzed to evaluate the unavailability of the microgrid in INER, and it is verified that the proposed strategy can reduce the duration of the outage of loads, and hence the reliability of a microgrid can be upgraded.

Tobacco use, most people would say. Smoking tobacco increases the risk of developing many types of cancer and is responsible for approximately one-third of all cancer deaths. The association between tobacco use and lung cancer is well known; lung cancer occurs about 20 times more often in heavy smokers than in nonsmokers [1]. However, many lung cancers are diagnosed in never smokers [2], and most smokers do not develop lung cancer [3,4].

Abstract: To describe the feeder topology and information exchange between intelligent electronic devices (IEDs) for Internet of Things (IoT), it is necessary to extend IEC 61850 and add a logical model. The feeder model described in IEC 61970 is then extended in IEC 61850 to serve as a container for the equipment along the distribution line. For the physical connections in the electrical equipment, both terminal and connectivity node logical models are added. Taking logical node XCBR as the example, its attributes for the terminals are added to the electrical equipment. The logical node LCNN is then further added in order to describe the connectivity node. By next adding the logical node LTPN to describe the topological node, and FTPA to describe the results of the topology analysis, we can efficiently describe the topology analysis results. Based on these new logical nodes, the exchange of topology information between intelligent terminals no longer relies on configuration files, but only requires logical nodes. Through the above expansion, the topology description and information exchange of medium and low voltage feeders are realized.

The effect of seven different thawing methods (atmospheric temperature thawing (AT), microwave thawing (MT), microwave magnetic nanoparticles thawing (MMT), microwave vacuum thawing (MVT), far-infrared thawing (FT), far-infrared magnetic nanoparticles thawing (FMT) and far-infrared ultrasonic thawing (FUT)) on water mobility and microstructure of frozen pork was examined. The results showed that the thawing loss, cooking loss, and centrifugal loss of MVT treatment were lower than those of other thawing methods. The results of LF-NMR and NMRI showed that in MVT and FUT treatment, the proportion of bound water and non-flowing water increased, while the proportion of free water decreased. The microstructure was significantly improved by microwave or far-infrared thawing assisted by magnetic nanoparticles, and the frozen pork samples had a more compact and granular microstructure. In summary, MVT and FUT improved the quality of thawed meat and have broad potential applications in thawing meat.

Different variants of thinning for discrete random variables are studied. The thinning procedure allows to introduce an analog of scale parameter for positive integer-valued random variables. Sufficient and necessary conditions for the existence of such a scale are given.

The performance analysis of the internal/external flows around a high speed vehicle in near-space is fundamental and critical to the configuration and structure design for high speed aircraft. In this paper, the two-dimensional coupled implicit Reynolds Average Navier-Stokes (RANS) solver and RNG k–ε turbulence model is employed to numerically simulate the flow field of an integrated high speed vehicle. The flow field are divided three parts to solve separately and compared with that solved by integrated simulation. The flow field are decomposed to save computer storage and simulation time. The first part is inlet/isolator, the second part is combustion chamber and the third is nozzle. In the computation process, the outlet condition of isolator is endowed to the inlet boundary of combustion chamber and the outlet boundary of combustion chamber is endowed to the inlet boundary of nozzle, then the whole flow field of integrated high speed vehicle is solved. Aerodynamic characteristic of fragment-computation and integration-computation is comparatively analyzed at different angles of attack, the results show that the maximum deviation of lift coefficient obtained by fragment-computation is less than 3% compared with that by integration, the maximum deviation of drag coefficient fragment-computation is less than 5% compared with that by integration, while pitching moment coefficient deviation less than 12%. However, for simulation time-consumption, the time used by fragment-computation reduces 45% compared with integration-computation. Meanwhile, by components force analysis, it can be concluded that the aerodynamic property of inlet/isolator can been obtained separately and hardly effected by other parts.

On the basis of the force and safety factor analysis of traditional retaining wall, a new analytical method of force and displacement of slope is suggested, the numerical theoretical solution of the stress distribution of the sliding body can be obtained under the conditions, which the stresses distribution are satisfied with the differential equilibrium equations, the boundary conditions, the compatibility equation and the macroscopic equilibrium equations. The interface stresses between the sliding body and the retaining wall are continuous, the theoretical solution of retaining wall stress distributions can be gotten, while the stress differential equilibrium equation, the compatibility equation, macroscopic force and moment balance equations are satisfied. The strain and displacement solutions can be obtained by using Duncan Chang and Hooke constitutive equations for the slope and the retaining wall respectively. The transfer station of landfill in the Guandukou Town of Badong County is taken as an example, the results of the sliding body and retaining wall analysis show: The stress and strain solutions of a slope and a retaining wall can be obtained by the proposed method, the forces between the retaining wall and the sliding body include shear stress and normal stress, and the stress distributions change with the deformation of the sliding body, the shape and material of retaining wall can be optimized according to the calculation results，it is feasible for the proposed analysis method of slope with retaining wall design to be run many years.

Incidence of COVID-19 has been associated with sociodemographic factors. We investigated variations in SARS-CoV-2 seroprevalence at sub-national levels in the Dominican Republic and assessed potential factors influencing variation in regional-level seroprevalence. Data were collected in a three-stage cross-sectional national serosurvey from June to October 2021. Seroprevalence of antibodies against the SARS-CoV-2 spike protein (anti-S) was estimated and adjusted for selection probability, age, and sex. Multilevel logistic regression was used to estimate the effect of covariates on seropositivity for anti-S and correlates of 80% protection (PT80) against symptomatic infection for ancestral and Delta strains. A total of 6,683 participants from 134 clusters in all 10 regions were enrolled. Anti-S, PT80 for ancestral and Delta strains odds ratio varied across regions, Enriquillo presented significant higher odds for all outcomes compared with Yuma. Compared to unvaccinated, receiving ≥2doses of COVID-19 vaccine was associated with a significantly higher odds of anti-S positivity (OR 85.94, [10.95-674.33]), and PT80 for ancestral (OR 4.78, [2.15-10.62]) and Delta strains (OR 3.08, [1.57-9.65]) nationally, and also for each region. Our results can help inform regional-level public health response, such as strategies to increase vaccination coverage in areas with low population immunity against currently circulating strains.

The issue of polarization, as opposed to inequality, has been little explored for European countries. in this paper, using harmonized data produced by Luxembourg Income Study Database, observes income trends for 12 European countries, showing an increase in polarization in many of the countries considered. the drivers that led to this concentration of income are also analyzed, noting heterogeneous factors within countries.

This study generalized the best copula to characterize the joint probability distribution between rainfall severity and duration in Peninsular Malaysia using two dimensional copulas. Specifically, to construct copulas, Inference Function for Margins (IFM) and Canonical Maximum Likelihood (CML) methods were specially exploited. For the purpose of achieving copula fitting, the derived rainfall variables by making use of the Standardized Precipitation Index (SPI) were fitted into several distributions. Five copulas, namely Gaussian, Clayton, Frank, Joe and Gumbel were put to the tests to establish the best data fitted copula. The tests produced acknowledged and satisfactory results of copula fitting for rainfall severity and duration. Surveying the Akaike Information Criterion (AIC) and the Bayesian Information Criterion (BIC), only three copulas produced a better fit for parametric and semi parametric approaches. Finally, two consistency tests were conducted and the results had shown that Frank Copula produced consistent results.

Distribution systems can form islands when faults occur. Each island represents a subsection with variable boundaries subject to the location of a fault(s) in the system. A subsection with variable boundaries is referred to as island in this paper. For operation in autonomous mode, it is imperative to detect the island configurations and stabilize these subsections. This paper presents a novel scheme for the detection of islanding boundaries and stabilizing the system during autonomous operation. In the first stage, a boundary detection method is proposed to detect the configuration of the island. In the second stage a dynamic voltage sensitivity factor (DVSF) is proposed to assess the dynamic performance of the system. In the third stage, a wide area load shedding program is adopted based on DVSF to shed the load in weak busbars and stabilize the system. The proposed scheme is validated and tested on a generic 18-bus system using a combination of EMTDC/PSCAD and MATLAB softwares.

The research presents the inter-comparison of atmospheric variables measured by 9 automatic meteorological stations. This set of data was compared with the measurements of other meteorological stations in order to standardize the values that must be adjusted when taken to different areas. The data of a set of a total of 9 GMX500, which measures conventional meteorological variables, and 10 WS100 sensors, which measures precipitation parameters. The automatic stations were set up at the Huancayo Observatory (Geophysical Institute of Peru) for a period of 5 months. The data set of GMX500 were evaluated comparing with the average of the 9 sensors and the WS100 was compared with a optical disdrometer Parsivel2. The temperature, pressure, relative humidity, wind speed, rainfall rate, and drop size distribution was evaluated. A pair of GMX500 sensors presented high data dispersion, it was found found that the errors came from a bad configuration; once this problem was solved, good agreement was archived, with low RMSE and high correlation. I was found that the WS100 sensors overestimate the precipitation with a percent bias close to 100% and the differences increase with the greater intensity of rain. The DSD retrieved by WS100 have unrealistic behavior with higher concentrations in diameters of 1 mm and 5 mm, in addition to a flattened curve.

Solidago virgaurea L. (European goldenrod, Woundwort), Asteraceae, is a familiar medicinal plant in Europe and other parts of the world, widely used and among the most researched species from its genus. The aerial parts of European goldenrod have long been used for urinary tract conditions and as an anti-inflammatory agent in the traditional medicine of different peoples. Its main chemical constituents are flavonoids (mainly derived from quercetin and kaempferol), C6-C1 and C6-C3 compounds, terpenes (mostly from the essential oil), and a large number of saponin molecules (mainly virgaureasaponins and solidagosaponins). Published research on its potential activities is critically reviewed here: antioxidant, antiinflammatory, analgesic, spasmolitic, antihypertensive, diuretic, antibacterial, antifungal, antiparasite, cytotoxic and antitumor, antimutagenic, antiadipogenic, antidiabetic, cardioprotective, and antisenescence. The evidence concerning its potential benefits is mainly derived from non-clinical studies, some effects are rather modest, whereas others are more promising, but need more confirmation in both non-clinical models and clinical trials.

While entropy was introduced in the second half of the 19th century in the international vocabulary as a scientific term, in the 20th century it became common in colloquial use. Popular imagination has loaded “entropy” with almost every negative quality in the universe, in life and in society, with a dominant meaning of disorder and disorganization. Exploring the history of the term and many different approaches on it, we show that entropy has a universal stochastic definition which is not disorder. The accompanying principle of maximum entropy, which lies behind the Second Law, gives explanatory and inferential power to the concept and promotes entropy as the mother of creativity and evolution. As social sciences are often contaminated by subjectivity and ideological influences, we try to explore whether the maximum entropy, applied to the distribution of wealth quantified by annual income, can give an objective description. Using publicly available income data, we show that the income distribution is consistent with the principle of the maximum entropy. The increase of entropy is associated to increase of society’s wealth yet a standardized form of entropy can be used to quantify inequality. Historically, technology has played a major role in development and increase of the entropy of income. Such findings are contrary to the theories of ecological economics and other theories which use the term entropy in a Malthusian perspective.

A single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: Place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: briefly describe the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article and it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions.

Transforming Small-Scale LNG Business, Enhancing Efficiency and Resilience in an Evolving Supply Chain In various industries, innovative systems have proven their value due to their efficiency and adaptability. A prime example of this lies in the rapid growth of the liquefied natural gas (LNG) market. LNG, a fuel derived from natural gas, has gained significant traction in recent years. In light of this, we aim to explore optimal strategies for small-scale LNG businesses, with a focus on revolutionizing their supply chain to ensure adaptability and sustainability. Our objective is to enhance efficiency and sturdiness in this evolving sector. By devising innovative methods and implementing cutting-edge technologies, we aim to revolutionize the small-scale LNG market, paving the way for a more optimized and resilient supply chain. Through this transformation, we strive to create a sustainable and adaptable framework that will drive the growth and success of a small-scale LNG businesses.LNG' ability to be transported and stored more cost-effectively in its reduced volume compared to natural gas in its original state is a significant advantage. The distribution network for LNG starts at numerous supply terminals and extends to a diverse range of consumption centers, each with varying tank capacities. In the broader economic context, the establishment of efficient routes for LNG Truck tank plays a critical role.To tackle the challenge of selecting a pickup location and determining optimal destinations with specific unloading volumes for liquefied natural gas (LNG), this research presents an innovative solution utilizing state-of-the-art machine learning techniques. The proposed approach combines the power of reinforcement learning, recurrent neural networks, online learning, and graph theory. By leveraging these cutting-edge techniques, we aim to develop an intelligent system that can effectively determine the most efficient pickup location and sequence of destinations for LNG delivery. This system will take into account various factors such as transportation costs tank capacity, and demand fluctuations. Through the integration of reinforcement learning, the system will continuously learn and improve its decision-making process in real-time. The recurrent neural networks will allow for the analysis of historical aim to model and optimize the complex network of pickup and delivery routes, considering factors such as distance, capacity constraints, and operational efficiencies. With this innovative approach, we strive to revolutionize the selection and planning process for LNG pickup and delivery, ultimately enhancing efficiency and reducing cost within the LNG supply chain.Improving the distribution network offers several financial benefits, including cost reduction, faster delivery times, more affordable distribution, and enhanced efficiency in the utilization of tanker trucks for LNG transportation. By optimizing the distribution network, transit costs associated with LNG transportation can be significantly lowered. This can be achieved through intelligent route planning, taking into account factors such as distance, traffic conditions, and fuel consumption. Minimizing transit costs contributes to overall savings for businesses operating in the LNG market. Faster delivery times are another advantage of an enhanced distribution network. By designing efficient routes and eliminating unnecessary detours or delays, the time taken for LNG to reach its intended destinations can be reduced. This not only improves customer satisfaction but also allows for more frequent deliveries and better coordination of supply and demand. Cheaper distribution is a direct outcome of an optimized distribution network. By strategically planning pickup locations, destinations, and intermediate stops, the costs associated with transferring LNG between terminals and consumption centres can be minimized. This leads to savings in transportation expenses, ultimately benefiting both businesses and end-users. Efficient utilization of tanker trucks is crucial for maximizing profitability in the LNG industry. An improved distribution network enables better allocation of resources, ensuring that tanker trucks are utilized optimally. This includes reducing empty or underutilized trips, maximizing load capacities, and minimizing idle time. Such efficiency improvements translate to cost savings and increased revenue for businesses involved in LNG transportation. Overall, the financial gains from improving the distribution network are substantial. Lower transit costs, faster delivery times, cheaper distribution, and more efficient use of tanker trucks contribute to increased profitability, competitiveness, and sustainability in the LNG market.

Daphne wolongensis described on the basis of a few known individuals was investigated in the wild, in Baoxing Valey, Sechuan. Its status of valid species was verified morphologically and genetically. Three newly found populations were compared to the closely related species Daphne retusa, D. tangutica, D. longilobata, D. acutiloba, D. sureil, to clones available in cultivation and selected cultivars. The high bootstrap values indicate a good level of genetic differentiation between each of the studied species. The hypothesis whether D. wolongensis is a hybridogenous species was rejected, it is a well-defined independent species. Based on morphological and genetic data, it seems likely that another species, D. limprichtii can be a mountain form of D. tangutica. Variability of populations in Wolong gives a good opportunity to select genotypes with a higher or better performance of combination of traits. From 51samples collected in Wolong it was possible to select the top ten different types as genetic resources for breeding. Daphne wolongensis, in the visited sites of Wolong area, occupies less than 1 km2. Together with isolated finds, the number of found individuals is less than 500 and the area is not larger than 10 km2, thus it falls to the IUCN category of “Critically Endangered” plants.

Studies on the detection of layers with elevated black carbon aerosol (BC) concentrations and the formation conditions of these layers help understand the vertical distribution of BC concentrations, which will provide a basis for the assessment of climate effects and early BC pollution warnings. By using the Weather Research and Forecasting with Chemistry (WRF-Chem) numerical model, we performed a numerical simulation analysis on the authenticity of strong elevated BC concentration layers that were detected by an aircraft in the mixing layer over Harbin, China, which is a high-emission area, on a clear sunny afternoon in the early heating period of 2016. We then discuss possible problems and solutions when non-vertical paths are used to detect the vertical distribution of BC concentrations. Finally, we discuss the favorable conditions for the formation of elevated BC concentration layers by weak vertical flow. The results show that the horizontal variability of BC concentration in the mixing layer in the observation area in Harbin was sufficiently large during the measurement. This produced a false elevated layer, as detected by the aircraft during one round of spiral flight in the mixing layer. The root mean square of the horizontal distribution of BC concentration did not change with height in the mixing layer during the daytime, but it decreased with the thickness of the mixing layer and was higher in the mixing layer than in the free atmosphere. Therefore, the thinner the mixing layer, in which the vertical distribution of the BC concentration is detected in an inclined path, the stronger interference of the horizontal variability on the detected results. When a spiral flight detection path is used, the aircraft should fly at least two rounds in the mixing layer. In the daytime, due to strong turbulence in the mixing layer, weak vertical uplift is not favorable for the occurrence of elevated BC concentration layers in the mixing layer. In the nighttime, if weak vertical uplift is well matched with the BC concentration or its vertical gradient, elevated BC concentration layers can be formed in the atmosphere. Compared with upper layers far from the ground, nighttime elevated layers are easier to form in lower layers near the ground because high BC concentrations or large vertical gradients are more likely to occur in the lower layers. Both cases facilitate the occurrence of large vertical upward transport rates of BC.

Abstract: Bulgaria is famous for its oil-bearing rose. R. damascena Mill. and R. alba L. are mainly cultivated in the country, but a recent survey of industrial plantations in 2020 revealed that R. centifolia L. and hybrids of R. damascena Mill. x R. gallica L. are also common in the rose valley. Although their essential oil cannot be compared in quality with the classic, they are preferred by farmers with high yields of flowers and resistance to diseases and pests. All these roses are also used to produce rose water and extracts. The aim of this investigation was to compare the yield and chromatographic fingerprints of seven rose oils and hydrosols produced in Bulgaria. The quantitative composition of the main components of the oils was compared with the norms of the world standard. Our study showed that the yield of essential oil from these roses was in the range of 0.015 - 0.048%. The main group in the chemical composition is terpene alcohols, which vary in the range: geraniol (17.60 - 34.02 %), citronellol (8.38 - 28.7 %), and nerol (4.8 - 11.90 %), but with a different ratio. Hydrocarbons are represented by saturated aliphatic homologs with an odd number of carbon atoms, the main ones being: nonadecane (8.10 - 22.67 %), heneicosane (4.37 - 10.21 %), heptadecane (1.07 - 2.98 %) and triclosan (0.81 - 5.90 %). In contrast, the chemical profile of the hydrosols was performed by phenyl ethyl alcohol (27.45 - 69.88 %), geraniol (13.72 - 28.67 %), and citronelol+nerol (4.56 - 17.37 %). The results show that the presence of plantations with a genotype different from that of R. damascena implies differences in the quality of rose oils and hydrosols. This predetermines their properties of use.

Statistical modeling of lifetime data plays an essential role in a wide range of practical fields, such as health and engineering. There have been a lot of studies done to develop statistical models that can better describe health data than traditional models. For the first time, we pioneer a novel family of continuous probability distributions called the generalized odd beta prime generalized (GOBP-G) family of distributions. The cumulative distribution and probability density functions of the new family are presented. A new generalization of the Weibull distribution called "generalized odd beta prime-Weibull" (GOBPW) is proposed using the pioneered GOBP-G family. The mixture representations of the new distribution are defined and derived. Some formal statistical properties of the GOBPW distribution, such as the moments, moment generating function, incomplete moments, information generating function, entropies, stress-strength function, quantile function, and order statistics, are derived. The estimation of the parameters of the proposed distribution is evaluated using the maximum likelihood estimation approach. Different cancer disease data sets, such as the bladder, head and neck, acute bone, and blood cancers, are used to illustrate the applicability and usefulness of the new model and were compared using several statistical accuracy measures with that of well-established extended Weibull distributions, which are the beta modified Weibull distribution, Kumaraswamy modified Weibull distribution, gamma generalized modified Weibull distribution, gamma log-logistic Weibull distribution, and beta log-logistic Weibull distribution. The results show that the proposed model gives better results than the competitive models. This study could guide the relevant stakeholders in choosing a suitable statistical model for the health data instead of relying on traditional models to enhance decision-making.

Sustainable continuous cover forestry is defined and analyzed in several ways. The differential equation representing growth of the basal areas of individual trees, motivated by fundamental biological production theory by Lohmander (2017a), is analyzed and extended in different directions. From the solution of the differential equation, the basal area and the tree diameter are obtained as explicit functions of time. The diameter is a strictly increasing function of time. In the absence of competitors, the diameter increment is shown to be a strictly decreasing function of time. Hence, the diameter increment can also be interpreted as a strictly decreasing function of the diameter. Alternative forms of adjustment of the differential equation, with consideration of competition, are defined. If the competition is strong, with large trees in the vicinity of a particular tree, then the basal area increment, and the diameter increment, are reduced. The growth of a large tree is less sensitive than the growth of a small tree, to competition from other trees. Under strong competition, the basal area increment, and the diameter increment, are strictly concave functions of the size of the tree. The unique maximum of the diameter increment occurs at a higher diameter, if the competition increases. In dynamic equilibrium, the tree size frequency distribution is stationary. If natural tree mortality can be avoided via the harvest strategy, the tree size frequency distribution is a function of the size and competition dependent growth function, and the harvest strategy. Empirical tree size frequency data are used to simultaneously estimate parameters of a size and competition dependent growth function and the applied harvest strategy, via nonlinear optimization. The properties of the estimated growth function are consistent with the corresponding properties of the production theoretically motivated hypothetical function, and the properties of the estimated harvest strategy confirm the corresponding hypotheses. The R2 of the nonlinear regression exceeds 0.97. With access to an empirically estimated equilibrium tree size distribution, it is possible to: 1. Estimate size frequency relevant parameters of tree size and competition dependent growth functions for individual trees. 2. Estimate the applied harvest strategy. 3. Explain and reproduce the empirically estimated tree size equilibrium distribution.

This study aimed to evaluate the discrepancies between genetic and visual coat color assignment in the Sarcidano Horse and to elucidate potential reasons. Individual DNA from 90 Sarcidano Horses was used for genetic assignment of coat color to explore the correspondence with individual forms containing phenotypical traits. The MC1R exon 1 and ASIP exon 3 have been genotyped and sequenced to obtain a picture of the coat color distribution in this breed. Surprisingly, once we compared the genetic results with the individual forms reporting the phenotypic data for each subject, a certain degree of non-correspondence between the phenotypic and genetic data in relation to coat color emerged. From the genetic analysis, Chestnuts (n = 58) resulted the most common Sarcidano Horse (n = 58), followed by a quite large number of Blacks (n = 28) and a very small number of Bays (n = 4), whereas phenotypic distribution resulted in 38 Chestnuts, 40 Bays, only 2 Blacks, and 10 Grays (without the possibility of recognizing the true color they carried). Chestnut resulted a very representative coat color, while many horses that visually identified as Bays were genetically Blacks. This discrepancy, that could be due to a variety of individual and external factors, including age, time of year, living situation and dietary condition, suggesting the importance of accurate coat color identification to ensure adequate features registration and reliable prediction of offspring’s coat color.

This study aims to model grinding of a Polish slag and evaluate the particle size distributions of the products obtained after different grinding times. Then, selected products were alkali activated in order to investigate the effect of particle size on the compressive strength of the produced alkali activated materials (AAMs). Other parameters affecting alkali activation, i.e. temperature, curing and ageing time were also examined. Among the different mathematical models used to simulate the particle size distribution, Rosin-Rammler (RR) was found to be the most suitable. When piecewise regression analysis was applied to experimental data it was found that the particle size distribution of the slag products exhibits multi fractal character. In addition, grinding of slag exhibits non-first-order behavior and the reduction rate of each size is time dependent. The grinding rate and consequently the grinding efficiency increases when the particle size increases, but drops sharply near zero after prolonged grinding periods. Regarding alkali activation, it is deduced that among the parameters studied, particle size (and the respective specific surface area) of the raw slag product and curing temperature have the most noticeable impact on the compressive strength of the produced AAMs.

Arguments of Mises and Hayek, who opposed the planned economy (PE), are used in the paper as a starting point for establishing the objective area of effective application of the PE. The abstract model of PE, based on the definitions of Mises and Hayek, leads to the conclusion that for the effective use of PE, it must be a part of mixed economy and it must produce a limited amount of essential goods of irreducible demand. These goods must be distributed among all members of society free of charge, evenly, without competition. Examples of a mixed economy are given that meet this requirement. Calculations of the personal benefit in the transition to a mixed model of the economy have been carried out. The positive and negative qualities of the planned and market methods of organization are considered. Mixed economy model combines these qualities in optimal construction. An analytical framework has been introduced for the construction of product characterization curves. Such curves provide criteria for determining the efficiency of manufacturing of this product in a planned economy. The general economic prerequisites for the usability of the PE are clarified. The applicability and advantages of the PE for the organization of the universal basic income (UBI) system are demonstrated. The possibility of using PE to solve the problem of guaranteed employment is mentioned.

The agamid lizard Phrynocephalus melanurus, is restricted to the Northwest China (Dzungar Basin) and adjacent Eastern Kazakhstan (Zaisan and Alakol basins). To elucidate the phylogeography of P. melanurus, we obtained the mitochondrial DNA COI segments of 175 sampled lizards from 44 localities across the whole distribution range. Phylogenetic analyses revealed two main clades comprising six geographically structured lineages (I, IIa, IIb, IIc1, IIc2, and IIc3) that fits an isola-tion by distance (IBD) model. The divergence from the most recent ancestor was dated to ~1.86 million years ago (Ma). Demographic analyses demonstrated lineage-specific response to past climate change: stable population for Clade I, IIb and IIc2; while past population expansion for IIc1 and IIc3 since 0.02 Ma and 0.18 Ma, respectively. Bayesian phylogeographic diffusion anal-yses detected initial spreading at the Saur Mount vicinity approximately 1.8 Ma. Historical species distribution modeling (SDM) projected expansion of the suitable habitat in the last interglacial period and stepwise contraction in the Last Glacial Maximum and Holocene epochs. The SDM predicts a shrinkage and shift of suitable area eastward as a response to future climate change. Our findings suggest that the evolution of P. melanurus followed a parapatric divergence with subsequent dispersal and adaptation to cold and dry environments during the Quaternary. Moreover, future conservation strategies need to be taken to maintain the population of lineage IIc1.

This paper proposes a Mixed Integer Conic Programming (MICP) model for community microgrids considering the network operational constraints and building thermal dynamics. The proposed multi-objective optimization model optimizes not only the operating cost, including fuel cost, purchasing cost, battery degradation cost, voluntary load shedding cost and the cost associated with customer discomfort due to room temperature deviation from the set point, but also several performance indices, including voltage deviation, network power loss and power factor at the Point of Common Coupling (PCC). In particular, the detailed thermal dynamic model of buildings is integrated into the distribution optimal power flow (D-OPF) model for the optimal operation. The heating, ventilation and air-conditioning (HVAC) systems can be scheduled intelligently to reduce the electricity cost while maintaining the indoor temperature in the comfort range set by customers. Numerical simulation results show the effectiveness of the proposed model and significant savings in electricity cost with network operational constraints satisfied.

This article evaluates the macroeconomic implications of commercial bank seigniorage, which emerges from the commercial banks’ power to create money in a fractional reserves regime. After evaluating the impact on aggregate output of commercial bank money relative to alternative exchange arrangements, the article identifies the determinants of commercial bank seigniorage and analyzes how equilibrium prices are determined in an economy where commercial banks extract seigniorage. The article also identifies the conditions under which commercial banks extract seigniorage, clarifies the relationship between seigniorage from commercial bank money creation and profits from pure financial intermediation, and shows how commercial bank seigniorage changes with different types of interbank payments settlement.

Somerateofmutationisinevitable,eveningenesthatthemselvesdeterminethemutation rate. Because mutation in these genes can alter the mutation rate, variation in the mutation rate is inevitable. This simple line of reasoning is corroborated by a handful of empirical studies that found mutation-rate variation in natural and laboratory populations. The evolutionary consequences of mutation-rate variation in natural populations can be many and can be difficult to predict, as selection on such variation can be both direct and indirect. For example, lineages with increased mutation rate will have increased adaptability in the long term but decreased overall fitness in the short term because most fitness mutations are immediately deleterious. In spite of its great relevance to basic and applied science, the rate of mutation to mutator phenotype continues to be essentially unknown. The reasons for this gap in our knowledge are largely methodological; in general, a mutator phenotype cannot be observed directly but must instead be inferred from numbers of some neutral “marker” mutation that can be observed directly: different mutation-rate variants will produce this marker mutation at different rates. Here, we derive the expected distribution of numbers of the marker mutants observed, accounting for the fact that some of the mutants will have been produced by a mutator phenotype that itself arose by mutation during the growth of the culture. This development makes possible a novel experimental protocol for estimating the rate of mutation to mutator phenotype. Simulated experiments using biologically-reasonable parameters that employ this protocol show that such experiments in the lab can give us fairly accurate estimates of the rate of mutation to mutator phenotype. Although our ability to estimate mutation-to-mutator rates from simulated experiments is promising, we view this study as a proof-of-concept study and only a first step towards practical empirical estimation.

To supply stable and high-quality power according to the advancement of industrial growth, electric power companies have performed maintenance of power facilities using various meth-ods. In the case of domestic power distribution facilities, there are limitations in performing di-agnostic management on all facilities owing to the large number of facilities; therefore, old fa-cilities are managed by the health index assessment method. The health index assessment com-prises only facility operation data and external environmental data and is managed only for four types of distribution facilities, including overhead/underground transformers and switchgear. In the case of extra high–voltage overhead wires, there is no standard for old replacement, despite the large number of wires, such as transformers and switchgear, and the large ripple effect of power failure in the event of a power outage. Therefore, in this paper, a health index assessment methodology for extra-high voltage overhead cables was developed. In this paper, we devel-oped an economic health index assessment methodology that additionally considers risk cost, which is different from the existing health index assessment method that uses only operational data and external environmental data to determine facility performance evaluation and aging replacement criteria. Using the health index assessment methodology developed in this paper, it is possible to expect a reduction in facility operating costs and investment costs from the per-spective of electric power companies through the replacement of old extra-high voltage over-head cables. In addition, from the perspective of consumers, it is expected to increase power re-liability and reduce the ripple effect of failure by preferentially replacing equipment with a high probability of failure.

In this paper, we aim to address the challenge of airflow interference during fault detection in high-speed train bogies by introducing a flow field and investigating the characteristics of the sound field distribution of critical components under its influence. This approach overcomes the limitation observed in previous studies that ignored the impact of the flow field. Furthermore, we evaluate and compare various layouts for inter-track acoustic sensor arrays. The proposed sensing methods hold significant practical engineering value, and the collected data serves as a valuable reference for acquiring acoustic signals from key bogie components in future research.

Mountain summit in Madagascar have generally a specific habitat and that figure home a local endemicity of herpetofauna. Mantidactylus pauliani, a typically aquatic and critically endangered amphibian from Ankaratra Mountain, is among of them. This species inhabits high elevation with restricted distribution range. Our study highlights here a new data of this species and its viability with environmental change. So that, we carried out annual monitoring from 2018 to 2021. Nine fixed transects of 100 m were done along the streams between 1762 and 2378 m a.s.l. We followed the herpetofaunal standard technique for collecting data (systematic ecological niche searching and direct observation), and data analysis was performed using χ² tests and Fac-tor Correspondence Analysis. Here we present the new ecological data of M. pauliani. This spe-cies home between 1900 - 2378 m a.s.l. within the humid forest and savannah habitat. We noticed also a fluctuation in population size and migration to the upper throughout the years across the season, and the stream quality and volume of water variation. This habitat change makes it vul-nerable and the annual bushfire surrounding plays a negative impact. Knowledge and under-standing of its ecological guilds is needed for running and updating conservation activities

At the plasma membrane, transmembrane receptors are at the interface between cells and their environment. They allow sensing and transduction of chemical and mechanical extracellular signals. The spatial distribution of receptors and the specific recruitment of receptor subunits to the cell membrane is crucial for the regulation of signaling and cell behavior. However, it is challenging to define what regulates such spatial patterns for receptor localization, as cell shapes are extremely diverse when cells are maintained in standard culture conditions. Bone morphogenic protein receptors (BMPRs) are serine-threonine kinases, which build heteromeric complexes of BMPRI and II. These are especially interesting targets for receptor distribution studies, since the signaling pathways triggered by BMPR-complexes depends on their dimerization mode. They might exist as pre-formed complexes, or assemble upon binding of BMP, triggering cell signaling which leads to differentiation or migration. In this work we analyzed BMPR receptor distributions in single cells grown on micropatterns, which allows not only to control cell shape, but also the distribution of intracellular organelles and protein assemblies. We developed a script called ComRed (Center Of Mass Receptor Distribution), which uses center of mass calculations to analyze the shift and spread of receptor distributions according to the different cell shapes. ComRed was tested by simulating changes in experimental data, showing that shift and spread of distributions can be reliably detected. Our ComRed-based analysis of BMPR-complexes indicates that receptor distribution depends on cell polarization. The absence of a coordinated internalization after addition of BMP suggests that a rapid and continual recycling of BMPRs occurs. Receptor complexes formation and localization in cells induced by BMP might yield insights into the local regulation of different signaling pathways.

We formulate the statistics of the discrete multicomponent fragmentation event using a methodology borrowed from statistical mechanics. We generate the ensemble of all feasible distributions that can be formed when a single integer multicomponent mass is broken into fixed number of fragments and calculate the combinatorial multiplicity of all distributions in the set. We define random fragmentation by the condition that the probability of distribution be proportional to its multiplicity and obtain the partition function and the mean distribution in closed form. We then introduce a functional that biases the probability of distribution to produce in a systematic manner fragment distributions that deviate to any arbitrary degree from the random case. We corroborate the results of the theory by Monte Carlo simulation and demonstrate examples in which components in sieve cuts of the fragment distribution undergo preferential mixing or segregation relative to the parent particle.

To generate a probability density function (PDF) for fitting probability distributions of real data, this study proposes a deep learning method which consists of two stages: (1) a training stage for estimating the cumulative distribution function (CDF) and (2) a performing stage for predicting the corresponding PDF. The CDFs of common probability distributions can be adopted as activation functions in the hidden layers of the proposed deep learning model for learning actual cumulative probabilities, and the differential equation of trained deep learning model can be used to estimate the PDF. To evaluate the proposed method, numerical experiments with single and mixed distributions are performed. The experimental results show that the values of both CDF and PDF can be precisely estimated by the proposed method.

The ISO 2859 and ISO 3951 series provide acceptance sampling procedures for lot inspection, allowing both sample size and acceptance rule to be determined, starting from a specific value either for the consumer or producer risk. However, insufficient resources often make it difficult to implement “ISO sampling plans.” In cases where the sample size is determined by external constraints, the focus shifts from determining sample size to determining consumer and producer risks. Moreover, if the sample size is very low (e.g. one single item), prior information should be included in the statistical analysis. For this reason, it makes sense to work within a Bayesian theoretical framework, such as that described in JCGM 106. Accordingly, the approach from JCGM 106 is adopted and broadened so as to allow application to lot inspection. The discussion is based on a “real-life” example of lot inspection on the basis of a single item. Starting from simple assumptions, expressions for both the prior and posterior distributions are worked out, and it is shown how the concepts from JCGM 106 can be reinterpreted in the context of lot inspection. Conceptual differences regarding the definition of consumer and producer risks in JCGM 106 and in the ISO acceptance sampling standards are elucidated and a numerical example is provided.

Reliability analysis techniques are customary standard tools that are used for evaluating the performance of different equipment and devices in order to minimize their downtime. To predict the reliability, life data from a sample that is satisfactorily representative of the equipment should be fitted to the suitable statistical distribution. The parameterized distribution may be used to estimate essential characteristics such as failure rate; and probability at a precise time, as well as system reliability. In the current study, Weibull++/ALTA software package is used as a novel tool to fit the available data set to estimate the best fitted probability density function (PDF) using Maximum Likelihood (MLE) for parameter estimation. The determined distributions are then assessed using goodness-of-fit test to define how well it fits the available data set. There are multiple methods for determining goodness-of-fit. Weibull distributions and their special cases’ parameters have an effect on life times.

With the increase of global human activities, a large number of technogenic magnetic particles (TMPs) generated by industrial activities such as coal combustion, traffic and so on enter sediments on continental shelves. However, there is currently a lack of understanding of the spatiotemporal distribution of TMPs on continental shelves, as well as the sedimentary effects they cause. This review work comprehensively analyzes the source, morphology, composition, and spatiotemporal distribution characteristics of TMPs. Then it elucidates their magnetic contribution to sedimentary environments in continental shelf seas, as well as the influence of heavy metals and active iron. At the same time, the existing problems and future development directions of TMPs on continental shelves are summarized.

This paper reviews the current knowledge of pepper anthracnose in the Philippines. We present research outputs on pepper anthracnose from the last three years. Then, we present evidence of the widespread occurrence of C. acutatum sensu lato in the Philippines. Finally, we highlight some research prospects that would contribute towards developing an integrated anthracnose management program.

Investigating the potential impact of composting and recycling waste on income distribution are crucial to promote a fairer and more sustainable fresh tomato supply chain (FTSC). Therefore, this study aims to explore the potential of gaining extra income from recycling tomatoes waste generated along the FTSC and to calculate the contribution of extra income from recycling tomato waste to reduce income inequality along the FTSC. Data were collected from 136 greenhouse tomato producers, 60 wholesalers, 18 exporters, 120 domestic retailers, 22 overseas retailers, and 3 recycling facilities in Türkiye. Marketing cost, absolute marketing margin, relative marketing margin and net profit margin were used when economically analyzing the FTSCs. Research results showed that the net profit share of the producer decreased associated with the increasing number of intermediaries. Research results also showed that revenue gained from composting and recycling of product loss and waste increased the welfare of greenhouse producer more than other supply chain actors. When taking into account the revenue from composting and recycling of wastes, producers increased their net profit by 9.85% at first FTSC, while that of second and third FTSCs were 8.29% and 9.21%, respectively comparing to the prevailing conditions. The contribution of extra revenue from composting and recycling of wastes to retailers was more comparing wholesaler and exporter. Retailers and wholesalers gaining from recycling in domestic FTSCs was more comparing to overseas one. Close cooperation between producers, wholesalers, exporters, retailers, and recycling facilities is essential for the effective implementation of waste recycling initiatives. Organizing the training and education programs focused on waste management can increase the extra income of producers and active intermediaries in FTSC from composting and recycling tomato wastes. Offering financial incentives, grants, or subsidies can encourage producers and other actors within the supply chain to adopt waste recycling practices. Continuous research and innovation are crucial in identifying and developing new technologies, processes, and strategies to minimize food loss and waste. Dominating fair-trade practices to ensure that all FTSC actors may balance the income distribution among FTSC actors.

Increasing groundwater levels (GWL) may become one of the most serious issues for Odessa City, Ukraine. This study investigated the spatial distribution characteristics and multifractal scaling behaviour of groundwater level/depth fluctuation for a Quaternary aquifer in Odessa City using a geostatistical approach and a Multifractal Detrended Fluctuation Analysis (MF-DFA). These two methods were applied to monthly GWL fluctuation time series from 1970 to 2020 to monitor 72 hydrogeological wells situated in different parts of Odessa City. The spatial distribution of GWL revealed an overall trend of decline and recovery from 1970 to 2020 in the study area, except for most of the southern region, where a persistent recovery of groundwater depth was observed. The MF-DFA results suggest that the dynamics of GWL fluctuations have multifractal characteristics in the Odessa City area. In addition, both long-range correlation and fat-tail probability distribution contribute to multifractality. However, long-range correlations among fluctuations made a major contribution to the observed multifractality of the GWL fluctuations time series. The generalized Hurst exponent shows a wide range of change (0.20 < h(q) < 2.85), indicating the sensitivity of GWL fluctuations to changes in small scale factors and large-scale factors. Regarding the long range correlations of GWL depth, the Hurst exponents (q = 2) demonstrated the positive persistence of groundwater depth recovery in the southern region and the persistence of groundwater depth variation in the other regions of the study area. The dynamic changes in GWL depth in the Odessa City area may be affected by both natural structural and anthropogenic factors.

Sierra Madre Mountain Range (SMMR) is the backbone of Luzon Islands that contains high concentration of highly important ecological resources distributed among the 68 protected areas therewith. The present study aimed to assess the tree species composition and diversity in a secondary forest within the SMMR. A 2.25-km transect with 10 900-m2 was established to record tree species with a diameter at breast height of at least 10 cm. The findings revealed 148 individuals of trees from 38 morphospecies, 28 genera, and 20 families. Importance values unveiled the Aurora endemic Macaranga stonei Whitmore as the most important species in terms of the relative values of its abundance, frequency, and dominance. The area was also found to be home for 33 natives, 12 endemics, five IUCN threatened species, and nine Philippine threatened trees. Furthermore, the study site was also found to have a considerably high diversity with Shannon Weiner Index value of 3.269 and a relatively even distribution of individuals among species supported by the Simpson’s Evenness index value of 0.9453. Significant correlational relationships were also found among species richness, Shannon Weinder index, and Simpson’s Evenness index with correlation coefficients ranging from 0.881 to .934 all significant at p < .001. Lastly, the study was able to produce a distribution map necessary in implementing targeted conservation strategies. These findings provided valuable implications for future research and implementation of targeted and participatory biodiversity conservation and protection strategies.

Data on the seasonally dry tropical forests of Mexico have been examined in the light of statistical mechanics. The results suggest a division into two classes of species. There are drifting populations of a cosmopolitan class capable of existing in most dry forest sites; these have a statistical distribution previously only observed (globally) for populations of alien species. A high proportion of species found only at a single site are endemic and these prefer sites comparatively low in species richness.

In the world industry plant, solid and solid metals are always in contact even their motions not independent. Modeling of rolling die contact with slab primarily needs to describe the Tribology of contact phenomena. Consideration of continuum theory of rolling contact how a contact region is formed between rolling die and slab, and how the tangential force is distributed over the contact area with coefficient of friction is important. The central concern of numerical model is used in this work to indicate a set of equations, derived from the contact principle, that transfer the physical event into the mathematical equations including the laws of nature, such as newton’s laws, boundary conditions, state of stresses and their derivatives at particular time and locations. In this paper the elasticity stress behavior of rolling die contact with slab for number of cyclic loads is modeled. The model is including new proposed constitutive equations for discontinuity of the velocity, pressure distribution in rolling contact from the enter side to exit side of the neutral point. To verify the model, finite element simulation and experimental data from the literature are considered. The results show good agreement with finite element simulation and experimental data.

The current work investigates the auxetic tensile deformation behavior of the inversehoneycomb structure with 5 × 5 cells made of biodegradable poly(butylene adipate-coterephthalate) (PBAT). Fused deposition modeling, an additive manufacturing method, produced such specimens. Residual stress (RS) and warpage, more or less, always exist in such specimens due to layer-by-layer fabrication, i.e., repeated heating and cooling. The RS influences the auxetic deformation behavior, but its measurement is challenging due to the very fine structure. Instead, the finite-element(FE)-based process simulation realized by an ABAQUS plug-in numerically predicts the RS and warpage. The predicted warpage shows a negligible slight deviation compared to the design topology. This process simulation also delivers the temperature evolution of a small volume material, revealing the local cyclic heating and cooling. The achieved RS serves as the initial condition for the FE model used to investigate the auxetic tensile behavior. With the outcomes from FE calculation without considering RS at hand, the effect of the RS on the deformation behavior is discussed for the global force-displacement curve, the structural Poisson’s ratio evolution, the deformed structural status, the stress distribution, and evolution, where the first three and the warpage are also compared with experimental results. Furthermore, the FE simulation can easily provide the global stress-strain flow curve with the total stress calculated from the elemental ones.

South Italy is characterised by a semi-arid climate with scarce rain and high evaporative demand, therefore the need to optimise water resources in this area is crucial, and climate change could worsen this condition. In citrus cultivation, which is one of the most important crops bred in Southern Italy, and more generally in Mediterranean regions, deficit irrigation strategies are im-plemented in order to cope with limited resource availability. On this basis, knowledge on how the territorial distribution of citrus would change in relation to these strategies constitutes valuable information for the stakeholders. Therefore, the objective of this study was to determine the prob-ability of presence of citrus in Sicily at changing of the percentage of water deficit application, in order to analyse change in the surface area and localisation of the crop. The methodology was based on the application of Species Distribution Models and Geographic Information Systems to the case study of the Province of Syracuse in Sicily. Different geostatistical and machine learning models were applied, based on 3-decades bioclimatic variables, DTM and irrigation; assessment of the outcomes was carried by using classification evaluation metrics. The analysis of the outcomes showed that uncorrelated predictor layers mainly included water input that affected most the probability of presence. Moreover, GIS analyses showed that deficit irrigation strategies would generate an overall reduction of cultivation surfaces in the territory and a decrease of citrus pres-ence in southern areas of the considered territory, where climate conditions are less favourable in terms of temperature and precipitations, thus providing useful information for decision support tools in agriculture and land use policy.

Although many devices have recently been proposed for pressure regulation and energy harvesting in water distribution and transport networks, very few applications are still documented in the scientific literature. A new in-line Banki turbine with positive outflow pressure and a mobile regulating flap, named PRS, was installed and tested in a real water transport network for pressure and discharge regulation. The PRS turbine was directly connected to a 55 kW asynchronous generator with variable rotational velocity, coupled to an inverter. The start-up tests showed how automatic adjustment of the flap position and the impeller velocity variation are able to change the characteristic curve of the PRS according to the flow delivered by the water manager or to the pressure set-point assigned downstream or upstream of the system, still keeping good efficiency values in hydropower production.

: Emaravirus (Order Bunyavirales; Family Fimoviridae) is a genus comprising over 20 emerging plant viruses with a worldwide distribution and economic impact. Emaraviruses infect a variety of host plants and have especially become prevalent in important long-living woody plants. These viruses are enveloped, with a segmented, single-stranded, negative-sense RNA genome and are transmitted by eriophyid mites or mechanical transmission. Emaraviruses have four core genome segments encoding an RNA-dependent RNA polymerase, a glycoprotein precursor, a nucleocapsid protein, and a movement protein. They also have additional genome segments, whose number varies widely. We report here that the proteins encoded by these segments form three main homology groups: a homolog of the sadwavirus Glu2 Pro glutamic protease; a protein involved in pathogenicity, which we named “ABC”; and a protein of unknown function, which we named “P55”. The distribution of these proteins parallels the emaravirus phylogeny and suggests, with other analyses, that emaraviruses should be split into at least two genera. Reliable diagnosis systems are urgently needed to detect emaraviruses, assess their economic and ecological importance, and take appropriate measures to prevent their spread (such as routine testing, hygiene measures, and control of mite vectors). Additional research needs include understanding the function of emaravirus proteins, breeding resistant plants and clarifying transmission modes.

Proton exchange membrane (PEM) fuel cells have emerged as a viable alternative energy production source for stationary and transportation applications. Reliable and sustainable fuel cell operation requires effective water management. Membrane water content can vary along the stack during transients which can lead to losses in fuel cell performance. To control these variations a model that predicts the internal humidity dynamics of the stack is needed. In this study, a control-oriented model for predicting membrane water content variation was developed and implemented in MATLAB/Simulink. A lumped parameter model was initially developed and then further discretized into smaller control volumes to track humidity distribution along the stack. To validate the model’s predictions, the predicted results were compared to computer simulation results from GT-Suite. The root mean square error (RMSE) between the model’s prediction and GT-Suite’s simulation results was found to be within 1.5 membrane water content for all cases, demonstrating the model’s capability to capture the variation of membrane water content along the stack. The developed model will be useful for real-time control of membrane water content variation in PEM fuel cells.

Positive recurrence for a single-server queueing system is established under generalised intensity conditions of service which does not assume existence of the density distribution function of service but a certain integral type lower bound as a sufficient condition. Positive recurrence implies existence of the invariant distribution and a guaranteed slow convergence to it in the total variation metric.

The recently discovered Gaia BH1 binary system, a Sun-like star and a dark object (presumably a black hole), may significantly change our understanding of the population of low-q binaries. The paper presents the components mass ratio distributions of binary systems of different observational classes. They all demonstrate a significant shortage of low-q systems. It is shown that this shortage can be filled with the help of search and study of objects like Gaia BH1.

The ironstone outcrops in the rupestrian grasslands, known as cangas, are rich in species of endemic plants. This high endemism and the constant threat because of the area loss and fragmentation make the conservation of the rupestrian grasslands necessary. The rupestrian grasslands that host one of Brazil's largest iron-ore mining areas are Iron Quadrangle. About 89 rare and endangered species of the Iron Quadrangle are exclusive to cangas, including a threatened species Arthrocereus glaziovii. According to the International Union Conservation of Nature (IUCN), this species is considered micro-endemic and endangered and a priority for recovering the Iron Quadrangle's ferruginous rupestrian fields. This work aims to evaluate the potential distribution of A. glaziovii based on abiotic variables and soil elements and characterize the distribution of mining titles that may restrict the areas of occurrence of this species. We used five types of ecological niche model (ENM) algorithms (Bioclim, Domain, MaxEnt, GLM and RandomForest) in two sets of environmental variables for the modeling: 20 climatic variables and 18 edaphic variables. Our results showed that the area of the potential occurrence of A. glaziovii is more extensive and covers areas outside the Iron Quadrangle. However, mining titles currently licensed and in exploration correspond the entire identified area, threatening the species' survival.

Suppose set

In order to improve the charge collection efficiency, we simulated and experimentally tested the doping structure of the electron multiplication layer in EBCMOS. In this paper, we simulate the charge collection efficiency of EBCMOS under different doping methods by modeling the collisional scattering of electrons with solid atoms in semiconductor materials and combining the transport trajectories of electrons in the electron multiplication layer, the simulation results indicate that using a layered doping structure to reduce the thickness of the index heavily doped layer can effectively optimize the electric field distribution in the electron multiplier layer and reduce the recombination rate of electrons. The optimized doping structure has a significant effect on improving charge collection efficiency. Based on the simulation results, doped samples were prepared and tested. The test results showed that the charge collection efficiency obtained under the condition of a P-type silicon substrate thickness of 7μm and an index heavily doped layer thickness of 1μm was 72.65%, reducing the thickness of the index heavily doped layer to 0.1μm, the charge collection efficiency obtained can reach 86.27%, which proves that reducing the thickness of the index heavily doped layer can effectively improve the charge collection efficiency of EBCMOS devices.

Pancreatic cancer is projected to be the second leading cause of cancer-related death by 2030 in the US. The benefits of the most common systemic therapy for various pancreatic cancer have been masked by high drug toxicities, adverse reactions, and resistance. Using nanocarriers like liposomes to overcome these unwanted effects has become very popular. This study aimed to formulate 1,3-bis tetrahydrofuran-2yl-5FU (MFU)-loaded liposomal nanoparticles (Zhubech) and evaluate the stability, MFU release kinetics, in vitro and in vivo anticancer activities, and biodistribution. Particle size and zeta potential were determined using a particle size analyzer, while cellular uptake of rhodamine-entrapped liposomal nanoparticle (Rh0-LnP) was determined by confocal microscopy. Gadolinium hexanoate (Gd-Hex) was synthesized and entrapped into the liposomal nanoparticle (LnP) (Gd-Hex-LnP) as a model contrast agent, to evaluate gadolinium biodistribution and accumulation by LnP in vivo using inductively coupled plasma mass spec-trometry (ICP-MS). The mean hydrodynamic diameters of the blank LnP and Zhubech were 90.0 ± 0.65 nm and 124.9 ± 3.2 nm, respectively. The hydrodynamic diameter of Zhubech was found to be highly stable at 4o C and 25oC for 30 days in solution. In vitro drug release of MFU from Zhubech formulation exhibited the Higuchi model (R2 value = 0.95). Both Miapaca-2 and Panc-1 treated with Zhubech showed reduced viability, two- or four-fold lower than that of MFU-treated cells in 3D spheroids (IC50Zhubech = 3.4 ± 1.0μM vs IC50MFU = 6.8 ± 1.1μM) and organoids (IC50Zhubech = 9.8 ± 1.4μM vs IC50MFU = 42.3 ± 1.0μM) culture models. Confocal imaging confirmed high uptake of rhodamine-entrapped LnP by Panc-1 cells in a time-dependent manner. Tumor efficacy studies in PDX bearing mouse model revealed more than 9-fold decrease in mean tumor volumes in Zhu-bech treated (108 ± 13.5 mm3) compared to 5-FU treated (1,107 ± 116.2 mm3) animals respectively. This study demonstrates that Zhubech may be a potential candidate for delivering drugs for pancreatic cancer treatment.

In this study, a simple and direct numerical scheme is proposed for the similarity solution of Smoluchowski coagulation equation based on Taylor series expansion method of moment. The results show that the present method is convergence with high accuracy by comparison with previous work in the literatures.

The simple sequence repeats (SSRs) are small 1-6bp tandem repeat elements present across diverse genomes and involved in gene regulation and evolution. Presently we analyzed SSRs in genomes of 98 species of family Polyomaviridae across four genera. The genome size ranged from 3962bp (BM87) to 7369bp (BM85) but maximum genomes were in the range of 5 to 5.5 kb. The GC% had an average of 42% and ranged between 34.69 (BM95) to 52.35 (BM81). A total of 3036 SSRs and 223 cSSRs were extracted using IMEx with incident frequency from 18 to 56 and 0 to 7 respectively. The most prevalent mono-nucleotide repeat motif was “T” (48.95%) followed by “A” (33.48%). “AT/TA” was the most prevalent dinucleotide motif closely followed by “CT/TC”. The distribution was expectedly more in coding region with 77.6% SSRs of which nearly half were in Large T Antigen (LTA) gene. Notably, most viruses with humans, apes and related species as host exhibited exclusivity of mono-nucleotide repeats in AT region, a proposed predictive marker for determination of humans as host in virus in course of its evolution. Each genome has a unique SSR signature which is pivotal for viral evolution particularly in terms of host divergence.

Climate change and the overall increase of seawater temperature is causing a poleward shift in species distribution, which includes a phenomenon described as tropicalization of temperate regions. This work aims at reporting the first records of four species off the southwestern Iberian Peninsula, namely oceanic puffer Lagocephalus lagocephalus Linnaeus, 1758, Madeira rockfish Scorpaena maderensis Valenciennes, 1833, ornate wrasse Thalassoma pavo Linnaeus, 1758, and bearded fireworm Hermodice carunculata Pallas, 1766. These last three species, along with other occurrences of aquatic fauna and flora along the Portuguese coast, reveal an ongoing process of poleward expansion of several species for which a comprehensive survey along the entire Iberian Peninsula is urgent. The putative origins of these subtropical and tropical species off continental Portugal are discussed, as well as the urgent need of public awareness due to potential health risks resulting from the toxicity of two of the four species reported in this paper.

This paper predict and effectively control the temperature distribution of the steady-state and transient states of anisotropic four-layer composite materials online, knowing the density, specific heat, heat conductivity and thickness of the composite materials. Based on the transfer function, a mathematical model was established to study the dynamic characteristics of heat transfer of the composite materials. First of all, the Fourier heat transfer law was used to establish a one-dimensional Fourier heat conduction differential equation for each composite layer, and the Laplace transformation was carried out to obtain the system function. Then the approximate second-order transfer function of the system was obtained by Taylor expansion, and the Laplace inverse transformation was carried out to obtain the transfer function of the whole system in the time domain. Finally, the accuracy of the simplified analytical solutions of the first, second and third order approximate transfer functions was compared with computer simulation. The results showed that the second order approximate transfer functions can describe the dynamic process of heat transfer better than others. The research on the dynamic characteristics of heat transfer in the composite layer and the dynamic model of heat transfer in composite layer proposed in this paper have a reference value for practical engineering application. It can effectively predict the temperature distribution of composite layer material and reduce the cost of experimental measurement of heat transfer performance of materials.

In this study, lithium reaction distributions, dependent on charge-discharge rate, were nondestructively visualized for a commercial lithium-ion battery, using the Compton scattering imaging technique. By comparing lithium reaction distributions obtained from two different charge-discharge speeds, residual lithium ions were detected at the center of the negative electrode on a fully discharged state, by relatively high-speed discharge rate. Moreover, we confirmed that inhomogeneous reactions were facilitated on a relatively high-speed charge-discharge rate, in both the negative and positive electrodes. A feature of our technique is that it can be applied to commercially used lithium-ion batteries, because it uses high-energy X-rays with a high penetration power. Our technique thus opens a novel analyzing pathway for developing advanced batteries.

This paper presents the results of hot smoke tests, conducted in a real road tunnel. The tunnel is located within the expressway S69 in southern Poland between cities Żywiec and Zwardoń. Its common name is Laliki tunnel. It is a bi-directional non-urban tunnel. The length of the tunnel is 678 m and it is inclined by 4%. It is equipped with the longitudinal ventilation system. Two hot smoke tests have been carried out according to Australian Standard AS 4391-1999. Hot smoke tests corresponded to a HRR (Heat Release Rate) equal to respectively 750 kW and 1500 kW. The fire source was located in the middle of the road lane imitating an initial phase of a car fire (respectively 150 m and 265 m from S portal). The temperature distribution was recorded during both tests using a set of fourteen thermocouples mounted at two stand poles located at the main axis of the tunnel on windward. The stand poles were placed at distances of 5 m and 10 m. The recorded data were applied to validate of a numerical model built and solved using Ansys Fluent. The calculated temperature distribution matched the measured values.

The main purpose of this paper is to evaluate electrical treeing degradation for cable insulation. To effectively deal with the currently facing issues, I endeavor to find the most optimal methods by means of applying signal process. First, we made three type models of electrical tree for PD generation to show the distribution characteristics and applied voltage to acquire data by using a PD detecting system. These acquired data presented distribution and four 2D distributions. Hn(q), Hn(), Hqn(), and Hqmax() were derived from the distribution of partial discharge. From the analysis of these distributions, each PD model is proved to hold its unique characteristics and the results were then applied as basic specific qualities for insulation conditions. In order to recognize the progresses of an electrical tree, we proposed methods using scale parameter by means of Weibull distribution. We measured the time of tree propagation for 16 specimens of each model from initiation stage, middle stage, and breakdown respectively, using these breakdown data, we estimated the shape parameter, scale parameter and MTTF(Mean Time To Failure). The results of this study recognize the sources of PD by applying acquired data from PD signals to pre-acquired data. If the cause of PD is degradation, in other words, electrical tree, we can determine the replacement time of devices at the initiation stage of tree growth progress or no later than the middle stage and use it as a basic methods analysis diagnosis system. That is, pattern recognition and Weibull distribution can be employed to get the reliability of diagnosis.

Single crystals of quaternary adamantine type Cu•GaGeS4 were grown by chemical vapor transport technique using iodine as transport agent. Dark red transparent crystals grew in a temperature gradient of dT = 900–750 °C. Chemical characterization by X-ray fluorescence showed an off-stoichiometric composition of the Cu•GaGeS4 crystals, in particular a slight Ge-deficit. By X-ray diffraction, Cu•GaGeS4 was found to adopt the chalcopyrite-type structure with the space group I-42d. The cation distribution in this structure was analyzed by multiple energy anomalous synchrotron X-ray diffraction and it was found that Cu and vacancies occupy the 4a site, whereas Ga and Ge occupy the 4b site. The band gap energies of several off-stoichiometric Cu•GaGeS4 crystals were determined by UV-Vis spectroscopy and are in the range of 2.1 to 2.4 eV. A non-linear correlation of the band gap energy with the Ge-content of the compound follows the usual bowing behaviour of semiconductor alloys with a bowing parameter of b = 1.45(0.08).

Although microgrids facilitate the increased penetration of distributed generations (DGs) and improve the security of power supplies, they have some issues that need to be better understood and addressed before realising the full potential of microgrids. This paper presents a comprehensive list of challenges and opportunities supported by a literature review on the evolution of converter-based microgrids. The discussion in this paper presented with a view to establishing microgrids as distinct from the existing distribution systems. This is accomplished by, firstly, describing the challenges and benefits of using DG units in a distribution network and then those of microgrid ones. Also, the definitions, classifications and characteristics of microgrids are summarised to provide a sound basis for novice researchers to undertake ongoing research on microgrids.

The bimodal grain-size distribution 0.9KNbO₃-0.1BaTiO₃ ceramics, with a typical perovskite structure in tetragonal phase at room temperature, were successfully prepared by an induced abnormal grain growth (IAGG) method at a relatively low sintering temperature. In this bimodal grain-sized distribution structure, the extra-large grains (about 10‒50 μm) were evolved from the micron-sized filler powders and the fine grains (about 0.05‒0.35 μm) were derived from the sol precursor matrix. The 0.9KNbO₃-0.1BaTiO₃ ceramics exhibit relaxor-like behavior with the diffused phase transition near room temperature, and confirmed by the existence of the polar nanodomain regions (PNRs) using the HRTEM images. The large room-temperature electrocaloric (EC) effect was found, characterized by an adiabatic temperature drop of 1.5 K, an isothermal entropy change of 2.48 J kg^-1 K^-1, and high EC strengths of ïDT/DEï = 1.50×10^-6 KmV^-1 and DS/DE = 2.48×10^-6 Jmkg^-1K^-1V^-1directly measured under E = 1.0 MV/m. These excellent ECEs demonstrate that this simple IAGG method is highly appreciated for synthesizing high-performance EC materials for efficient cooling devices.

Spike-and-wave discharge (SWD) pattern detection in electroencephalography (EEG) signals is a key signal processing problem. It is particularly important for overcoming time-consuming, difficult, and error-prone manual analysis of long-term EEG recordings. This paper presents a new SWD method with a low computational complexity that can be easily trained with data from standard medical protocols. Precisely, EEG signals are divided into time segments for which the Morlet 1-D decomposition is applied. The generalized Gaussian distribution (GGD) statistical model is fitted to the resulting wavelet coefficients. A k-nearest neighbors (k-NN) self-supervised classifier is trained using the GGD parameters to detect the spike-and-wave pattern. Experiments were conducted using 106 spike-and-wave signals and 106 non-spike-and-wave signals for training and another 96 annotated EEG segments from six human subjects for testing. The proposed SWD classification methodology achieved 95 % sensitivity (True positive rate), 87% specificity (True Negative Rate), and 92% accuracy. These results set the path to new research to study causes underlying the so-called absence epilepsy in long-term EEG recordings.

A copula is a useful tool for constructing bivariate and/or multivariate distributions. In this article, we consider a new modi fied class of (Farlie-Gumbel-Morgenstern) FGM bivariate copula for constructing several dierent bivariate Kumaraswamy type copulas and discuss their structural properties, including dependence structures. It is established that construction of bivariate distributions by this method allows for greater flexibility in the values of Spearman's correlation coefficient rho,  and Kendall's tau . For illustrative purposes, one representative data set is utilized to exhibit the applicability of these proposed bivariate copula models.

Bisphenol A (BPA) has been identified as one of endocrine disrupting chemicals (EDCs). Due to its massive production (over 700,000 tons per year) and the extensive use of BPA-based plastics (i.e., polycarbonate and epoxy resin) in Taiwan, it was thus included into a toxic substance by the Ministry of Environment. This work surveyed the updated information about the production of BPA and its environmental distributions in Taiwan over the past decade. Furthermore, the regulatory strategies and countermeasures for managing the environmental risks of BPA by the Taiwan government were summarized to show the cross-ministerial efforts under the relevant acts, including the Toxic and Concerned Chemical Substances Control Act (TCCSCA), the Food Sanitation Management Act (FSMA) and the Commodity Inspection Act (CIA). The findings showed that most of the monitoring data showed far below the acceptable risks. However, the people may pose an adverse threat to the aquatic environment and human health via ecological and food chains. In addition, some countermeasures were further recommended to echo the international actions on environmental endocrine disruptors in recent years.

With the rapidly increasing of people’s purchasing power, the fast moving consumer goods (FMCG) industry is supposed to grow dramatically. In order to gain more market access and profile, it is important for the FMCG manufacturers and retailers to find the preferences and provincial characteristics of consumers, to develop more suitable goods distribution strategy. Based on retails marketing data with geographic characteristics, this paper proposes a new combination of geography methods to solve the problems in distribution of FMCG. Via multiple K-means clustering and cross validation of KNN half off, the mesoscopic sales features are extracted through the classification of retails, which can indirectly grasp the consumer behavior characteristics. Based on space division and Moran’ I spatial autocorrelation arithmetic, two strategies are developed to satisfy consumer’s needs and promote sales, including conservative and positive strategies. According to our analysis, the total sales volume of the regions will increase by 5.1% and 10.3%. This study can be applied to the provide purchase strategies for FMCG retails according to their locations. The research can explore the consumption potential of different areas, thus improving the profile of retails and the development of economy in more mesoscopic scale.

Global climate change, dominated by climate warming, is seriously affecting the balance of global ecosystems, but the risk of species extinction is particularly high in low-altitude mountain areas. To clarify the response of the endemic and critically endangered species Ilex nanchuanensis to climate change, this study used the MaxEnt model to simulate and predict the potential habitat of I. nanchuanensis during the Last Interglacial, Last Glacial Maximum, the current period, and two future periods (the 2050s and 2070s). The results showed that the hottest monthly minimum temperature is the most important climatic factor affecting the geographical distribution of I. nanchuanensis. Furthermore, I. nanchuanensis will be at risk of population shrinkage and extinction in the future, with the center of mass moving further northwest as concentrations of greenhouse gases increase, especially in the 2070s, when its geographical distribution shrinks the most under the RCP6 scenario. Global warming is causing habitat degradation for many species and will continue to migrate to higher altitudes and latitudes in the future, seriously affecting the global ecosystem balance. Therefore, to actively respond to the impacts of climate change, protected areas should be established around the geographical distribution centers of species, and core, buffer, and experimental areas should be scientifically and rationally delineated for the conservation and cultivation of germplasm resources.

The material flow dynamic and velocity distribution on the melted domain surface play a crucial role on the joint quality and formation of welding defects. In this study, authors investigated the effects of the low and high currents of plasma arc welding on the material flow and thermodynamics of molten pool and its relationship to the welding defects. The high-speed video camera (HSVC) was used to observe the convection of the melted domain and welded-joint appearance. Furthermore, to consider the Marangoni force activation, the temperature on the melted domain was measured by a thermal HSVC. The results revealed that the velocity distribution on the weld surface was higher than that inside the molten weld pool due to the difference of the massive density between the air and the steel. Moreover, in the case of low welding current (80A) the convection speed of molten was faster than that of the high welding current case (160A) owing to the difference of main driving forces direction and strength, which leading to undercut and humping defects on the weld surface and excessive convex (burn-through) defect at the bottom weld side, respectively. The medium welding current (120A) had two convection patterns with the main flow in backward direction, which resulted in better welding quality without defect. The interaction between the shear force and Marangoni force played a solid state on the convection and heat transportation processes in the plasma arc welding process.

Oncomelania Hupensis is the exclusive intermediary host of Schistosoma japonicum in China. The alteration of its habitat and population distribution directly affects the safety of millions of individuals residing in the Yangtze River Economic Belt (YREB), and the ecological stability. Therefore, it is crucial to analyse the influence of climate change on the distribution of O. Hupensis in order to achieve accurate control over its population. This study utilised the MaxENT model to forecast possible snail habitats by utilising snail distribution data obtained from historical literature. The subsequent outcomes were achieved: The primary ecological factors influencing the distribution of O. Hupensis are elevation, minimum temperature of coldest month, and precipitation of wettest month; Furthermore, future climate scenarios indicate a decrease in the distribution area and a northward shift of the distribution centre for O. hupensis; Specifically, those in the upstream will move northeast, while those in the midstream and downstream will move northwest; These changes in suitable habitat area, the average migration distance of distribution centers across different climate scenarios, time periods, and sub-basins within the YREB, resulting in uncertainty. This study offers theoretical justification for the prevention and control of O. hupensis along the YREB.

Recent climate change and water pollution has affected algal diversity resulting in emergence of more tolerant species. They can be the indicators of water quality, pollution and seasonal changes. Present study revealed the green algal diversity and distribution pattern according to water parameters and season in the Lucknow City, India. The water sample were collected from seven sites within Lucknow and outskirts. The occurrence of a total of 36 taxa of green algae belonging to 11 genera are recorded. It has been observed that less polluted water is dominated by Spirogyra; where conductivity, TDS and salinity of water were low. Whereas the more polluted water was dominated by desmids. Dominance index was found highest in site 4 (0.61), where only three taxa were identified; whereas the lowest (0.13) was measured in site 1, where nine taxa were identified. This study also recorded several algal taxa for the first time from Lucknow.

In the broader landscape of cryptocurrency risk management, this study delves into the nuanced estimation of Value at Risk (VaR) for a uniformly weighted portfolio of cryptocurrencies, employing the bivariate Normal Inverse Gaussian distribution renowned for its semi-heavy tails. Utilizing high-frequency data spanning from January 1st, 2017, to October 25th, 2022, with a primary focus on Bitcoin and Ethereum, our research seeks to accentuate the resilience of VaR methodology as a paramount risk assessment tool. The essence of our investigation lies in advancing the comprehension of VaR accuracy by quantitatively comparing observed returns of both cryptocurrencies with their corresponding estimated values, with a central theme being the endorsement of the Normal Inverse Gaussian distribution as a potent model for risk measurement, particularly in the domain of high-frequency data. To bolster the statistical reliability of our results, we adopt a forward test methodology, showcasing not only a contribution to the evolution of risk assessment techniques in Finance but also underscoring the practicality of sophisticated distributional models in econometrics. Our findings not only contribute to the refinement of risk assessment methods but also highlight the applicability of such models in precisely modeling and forecasting financial risk within the dynamic realm of cryptocurrencies, epitomized by the case study of Bitcoin and Ethereum.

This article is devoted to overcoming the contradiction between the problem of maximizing the extraction of wind energy as the goal of optimizing wind turbines, and the use of traditional methods based on criteria for the aerodynamic quality of the blades. A modified technique is considered in which the optimization criterion is the directly extracted flow power. It is based on pulse theory methods that use specific power as an optimization criterion. A comparative analysis of the energy efficiency of different types of turbines is carried out, and the effects of blade inversion are considered. A method for calculating multi-rotor turbines based on the concept of uniform power distribution is presented. The compatibility of proprietary and traditional methods is considered by comparing the results of numerical experiments with calculated and experimental data from sources. Optimization computational algorithms generate data from numerical experiments and determine optimal parameter configurations for the turbines under consideration. It is shown that orthogonal Darrieus turbines in high-speed mode provide energy efficiency comparable to collinear turbines, and multi-rotor turbines with power uniformly distributed over the working section are not inferior in energy efficiency to basic turbines, with linear blade velocities halved.

Abstract:Background: Foot ulcers, especially dorsal foot ulcers caused by straps in footwear, can lead to discomfort, pain, and severe complications, particularly in individuals with diabetes and leprosy. While plantar foot pressure measurements have been extensively studied, research on the impact of strap-induced pressure on the dorsal foot aspect remains limited.Research question: The main research question of this prospective study is: Does the implementation of a rolled inner seam strap design (RIS) in flip-flops result in reduced pressure at the toehold area compared to traditional strap designs (Control) in healthy volunteers?Methods: We studied healthy female volunteers, with 10 feet (5 left and 5 right) per arm of the study. Two types of flip-flops, RIS and Control, were compared in a standardized 5-step walk trial on a hardwood floor. Pressure at the toehold was measured using Pressure Sensitive Switches with portable, accurate, ultra-thin pressure sensors. Paired t-tests compared the maximum pressure at the toehold between RIS and Control flip-flops (p < 0.05).Results: The study revealed a statistically significant difference in pressure at the toehold between the RIS and Control flip-flops (p = 0.0014). The mean difference of -40.90 grams (95% CI: -61.22 to -20.58) indicated that the RIS exerted significantly lower pressure than the Control flip flops. The RIS group had a mean pressure of 29.30 grams. The Control group had a mean pressure of 70.20 grams at the toehold area.Significance: The findings of this study have significant clinical implications for individuals at risk of foot ulcers, particularly those with neuropathic conditions such as diabetes and leprosy. The implementation of the RIS design in flip-flops may offer a practical and cost-effective solution to reduce strap-induced pressure and mitigate the risk of strap-related foot ulcers, especially in resource-limited settings where comprehensive foot care is lacking.

This research presents a comprehensive computational analysis of the two-phase flow dynamics within a three-dimensional porous transport layer (PTL) in a proton exchange membrane (PEM) electrolyzer. Employing advanced computational fluid dynamics (CFD) and a volume of fluid (VOF) approach, the study utilizes the finite-volume method to model a time-dependent, isothermal process within a laminar flow regime. Notably, the study treats oxygen as the dispersed phase and water as the continuous phase within the system. Investigations on the anode side uncovered the formation of gas bubbles on the electrode's surface subsequent to the electrochemical reaction. The simulation, spanning 5 seconds with 0.25-second intervals, highlights the critical role of the time interval between the initiation and 2 seconds in achieving pressure and velocity equilibrium within the PTL. The initial 0.75 seconds witnessed a peak in oxygen concentration, followed by its movement across the PTL, exhibiting a transition from regions of lower to higher concentration, consistent with known physical behaviour. Remarkably, the model recorded the highest pressure of 3.5 Pa at 0.25 s. Furthermore, the study observed an incremental pressure drop from 0.25 s to 0.5 s and 1 s, approximately amounting to 28.5% and 20%, respectively, ultimately leading to a uniform pressure distribution within the model. Over time, the pressure drop intensified across the entire model due to the evolving nature of the oxygen gas. These findings provide valuable insights into the complex dynamics of two-phase flow processes within PEM electrolyzers, contributing to the advancement of sustainable energy technologies.

Due to the great threat of torpedo against surface warships, an efficient hydroacoustic countermeasure system must output realtime strategies that can accommodate varied antagonizing scenarios. Aiming at the decision-making problem in the anti-torpedo hydroacoustic countermeasure cases, this paper proposes an intelligent adversarial strategy based on the game theory. By discretizing the strategy space of both sides, a matrix game model is established with the payoff characterized by the capture probability of attacking torpedo. An improved simplex algorithm is then developed to get the mixed-strategy Nash equilibrium of the game model, with which preferred avoiding strategies can be obtained to minimize the risk of being captured by the attacking torpedo. Based on the probabilistic view of preferred adversarial strategy, the launching strategy of floating acoustic decoy can be achieved, and the evasion trajectory of warship can be confirmed simultaneously. Numerical simulation demonstrates that the proposed method can generate realtime intelligent antagonizing strategy, and consequently, can improve the survival rate of surface warships in the of anti-torpedo countermeasure scenarios.

Nanoparticles are of great importance for various scientific and technological applications, drug discovery, ecology, molecular biology, etc. Size is a basic characteristic of any particle, and dynamic light scattering is beyond competition when measuring particle size in dispersions ranging from nanometers to micrometers. Unfortunately, this method has a serious problem in processing and interpreting experimental data. Instrument noise and polydispersity of the sample lead to the situation when one initial autocorrelation function corresponds to several different particle size distributions. Sometimes these different solutions of the inverse task can be found by changing parameters in the software. Sometimes the scientist cannot be suspicious of possible other solutions, having one result from the program. In this article I demonstrate the problem on model and experimental data using three known programs: CONTIN, the Malvern Zetasizer and DynaLS. I also present my own free program Autocor, which allows to test our own hypotheses about the modality and shape of the particle size distribution by optimizing the parameters of our own models with a small number of degrees of freedom.

Control charts have been widely used for monitoring process quality in manufacturing and play an important role in triggering a signal in time when detecting a change in process quality. Many control charts in literature assume that the in-control distribution of the univariate or multivariate process data is continuous and not categorical. This research develops two exponentially weighted moving average (EWMA) proportion control charts for monitoring a process with multinomial proportions when considering both large and small sample sizes. For a large sample size , the charting statistic depends on the well-known Pearson χ2 statistic, and the control limit of the EWMA proportion chart is determined by an asymptotical chi-square distribution. For a small sample size, we derive the exact mean and variance of the Pearson χ2 statistic. Hence, the exact EWMA proportion chart is determined. The proportion chart can also be applied to monitor the distribution-free continuous multivariate process as long as each categorical proportion associated with specification limits of each quality variable is known or estimated. Lastly, we investigate the detection performance of the proposed EWMA proportion chart by numerical analyses. Real data analysis demonstrates the beneficial application of the proposed EWMA proportion charts.

The present study contributes to bridging the gap on research related to the presence and distribution patterns of carnivore mammals in the western state of Michoacán, highlighting the importance and need to increase efforts aimed at the study and monitoring of wildlife present in this region. The distribution of carnivore in western Mexico was modeled through the application a two-scale approach: a large, modeled region, corresponding to the western part of the country, for which models were obtained that represent the distribution potential of the species, and, the second modeled study area that includes only the western portion of the state of Michoacán, in which models of the current distribution of the species for this region were proposed. A series of predictive models were generated on the current distribution of 11 species of carnivore species (Canis latrans, Urocyon cinereoargenteus, Herpailurus yagouaroundi, Leopardus pardalis, Leopardus wiedii, Puma concolor, Panthera onca, Conepatus leuconotus, Bassariscus astutus, Nasua narica, Procyon lotor), from which, prioritization exercises were carried out on important areas for the conservation of these species, as well as the comparison and analysis of the existing natural protected areas (NPA) in the study area. The different exercises for prioritizing areas for conservation yielded similar results and show the potential percentages of the landscape that can be subjected to protection and conservation programs.

Biogeography research is flawed by the poor understanding of microbial distributions due to the lack of a systematic research framework, especially regarding appropriate study units. By combining pure culture and molecular methods, we studied the biogeographic patterns of nematode-trapping fungi by collecting and analysing 2,250 specimens from 228 sites in Yunnan Province, China. We found typical watershed patterns at the species and genetic levels of nematode-trapping fungi. The results showed that microbial biogeography could be better understood by 1) using watersheds as research units, 2) removing the coverup of widespread species, and 3) applying good sampling efforts and strategies. We suggest that watersheds could help unify the understanding of the biogeographic patterns of animals, plants, and microbes and may also help account for the historical and contemporary factors driving species distributions.

This work addresses the problem of sampling from Gaussian probability distributions by means of uniform samples obtained deterministically and directly from space-filling curves (SFCs), a purely topological concept. To that end, the well-known inverse cumulative distribution function method is used, with the help of the probit function,which is the inverse of the cumulative distribution function of the standard normal distribution. Mainly due to the central limit theorem, the Gaussian distribution plays a fundamental role in probability theory and related areas, and that is why it has been chosen to be studied in the present paper. Numerical distributions (histograms) obtained with the proposed method, and in several levels of granularity, are compared to the theoretical normal PDF, along with other already established sampling methods, all using the cited probit function. Final results are validated with the Kullback-Leibler and two other divergence measures, and it will be possible to draw conclusions about the adequacy of the presented paradigm. As is amply known, the generation of uniform random numbers is a deterministic simulation of randomness using numerical operations. That said, sequences resulting from this kind of procedure are not truly random. Even so, and to be coherent with the literature, the expression ”random number” will be used along the text to mean ”pseudo-random number”.

The practical application of a multi-objective optimization strategy based on evolutionary algorithms was proposed to optimize the plastics thermoforming process. For that purpose, the various steps of the process were considered individually and the optimization strategy was applied to the determination of the final part thickness distribution with the aim of demonstrating the validity of the methodology proposed. The preliminary results obtained considering three different theoretical initial sheet shapes indicates clearly that the methodology proposed is valid, as it provides solutions with physical meaning and with a great potential to be applied in real practice.

We successfully designed an optimized plenum fan with a three-dimensional, smooth, curved blade. The optimized model revealed that the static pressure in the channel had been increased uniformly and stably, and the flow separation at the leading edge was significantly reduced. To conclude, the three-dimensional blade stabilized the fluid flow, and the flow friction was reduced by suppressing the flow separation as much as possible so that both the static pressure and the static efficiency were clearly improved in comparison with those of the original model. The static efficiency, as a result, was improved by 6% compared with that of the original model.