The pandemic was an enormous experience all over the world. The type of living, working and study were changed irreversibly. Facing the opportunity to establish old frames of education in universities is impossible. The adoption of new ways of teaching and assessments reveal their convenience and in the same way their weak points. In response to that stage, on 14 December 2022, the EU parliament accepted the "Digital Decade Policy Programme 2030", for the establishment of a digital transformation community (EU 2022). Trakia University had an online assessment system, quizzes for self-training, and final exams, developed in 2008 on Moodle virtual learning environment. During the pandemic, online exams and lectures were conducted using platforms like BigBlueButton in Moodle or Google Meets. The article gives the results of online exams before, during, and after the pandemic. The outcome, without doubt, displays the lowering knowledge level or performance during the social isolation due to COVID-19, and after, and the reasons are discussed. During the second year of the pandemic was mentioned also a high dropout of students. Now the situation is returning to the previous levels, before the pandemic, but the quality of education is not yet reached. The article values the grades results of session exams and has the intention to clarify the influence of the pandemic period on the excellence of high institution education.

Introduction: Dental students’ use of online material to supplement learning has been studied, but educator awareness and reaction to the findings of this research is unknown. This small local study aimed to investigate dental students’ use of online content as a learning tool from an educator’s perspective.Methods: Educators at an Irish dental school completed a survey based on dental students’ use of online learning. Quantitative descriptive analyses were carried out as appropriate on the data collected, and a subsequent focus group was held to gain deeper insight into survey results. Data were analysed for themes by deductive and inductive coding methods.Results: This study found a sample of educators were aware of some student behaviours around online videos. Most educators correctly thought that students are likely to refer to online videos to prepare for dental procedures. Several educators believed that teachers should incorporate videos into their learning, but do not themselves upload or recommend online videos. Most recalled discussing accuracy and/or relevancy of online content with their students. Fewer thought that students would discuss contradictory videos with them. Focus group participants expressed concern over the accuracy of online content. This along with a lack of time were some reasons deterring them from referring students to online videos. Conclusions: An opportunity exists for dental educators and their students to have local dialogue around (1) student use, critical appraisal, and sharing of dental procedural video material; and (2) perceived benefits and challenges of incorporating both school-produced and online videos into teaching and learning. Although arguably non-generalizable beyond this context, this study may inform future research and serve to spark conversations within schools regarding video use for teaching clinical dental procedures.

Higher education informatization (HEI) is an interdisciplinary field that examines the use and integration of information and communication technologies (ICTs) in higher education. This paper provides a bibliometric and visual analysis of the research trends, patterns, and topics in this field. Using the Web of Science database, we selected and analyzed 199 SCI and SSCI papers on HEI published from 2000 to 2023 by VOSviewer and CiteSpace software. The results indicate that the publication volume of HEI research has grown significantly in recent years, with China and the US being the most productive and influential countries. The author network shows the collaboration and contribution of different researchers and institutions, while the journal network reveals the multidisciplinary nature and scope of the field. The keyword network and the burst keyword analysis identify the main research themes and the emerging hot topics in HEI, such as online learning, big data, and artificial intelligence. The co-citation network of sources illustrates the theoretical and methodological foundations and influences of the field. The paper concludes with some implications and suggestions for future HEI research.

A rapid and efficient technique using an electronic nose based on a mass detector combined with headspace sampling (HS-SPME-MS e-nose) and chemometric tools was applied to classify beer samples between fresh and aged and between samples contained in aluminium cans or glass bottles, and to predict the shelf life of beer. The mass spectra obtained from the HS-SPME-MS e-nose contain information on the volatile compounds, recorded as the abundance of each ion at different mass-to-charge (m/z) ratios. The analysis was performed on 53 samples aged naturally for eleven months in the absence of light and with a controlled temperature of around 14° C +/- 0.5° C. Principal Component Analysis (PCA) was performed on the data, showing a grouping of samples between fresh and aged. Partial Least Square Discriminant Analysis (PLS-DA) allowed discriminating fresh from aged beers but was not able to discriminate samples packaged in aluminium cans or in glass bottles. Finally, Partial Least Square Regression (PLSR) was applied to build a prediction model and showed to be effective to predict beer shelf life.

Currently, with the rapid growth of the population, the demand for metals has increased, especially for the manufacture of electronic devices such as cell phones, computer equipment, among others. Once these devices stop working, most are sent to landfills, which represents a danger since these wastes contain metals and other materials that must be properly managed to prevent them from having a negative effect on the environment and the human being. On the other hand, e-waste contains valuable metals such as copper, gold, and silver, the concentration of which in these materials makes it cost-effective to recover. This paper presents a review of the extraction and recovery of valuable metals from electronic waste by hydrometallurgical methods, as well as patents and industrial processes related to the management and treatment of this waste.

ESBL-producing E. coli is a growing public problem in healthcare settings and the community. Between 2009 and 2018, a total of 187 ESBL-producing pathogenic E. coli isolates were confirmed, and clonal complex (CC) 10 was the predominant clone. This study aimed to characterize ESBL-producing pathogenic E. coli CC10 strains obtained from diarrheal patients to improve the understanding of CC10 distribution in the Republic of Korea. A total of 57 CC10 strains were selected for molecular characterizations, such as the identification of serotype, antibiotic resistance genes, genetic environments, plasmid profiles, and the genetic correlation between CC10 strains. In the CC10 isolates, the most prevalent serotype was O25:H16, followed by O6:H16. ESBL genes were identified as blaCTX-M, and the most dominant ESBL gene was blaCTX-M-15 (56%) and blaCTX-M-14 (30%). Most blaCTX-M genes were located on plasmids, and these plasmid profiles were confirmed as IncB/O/K/Z, IncF, IncI1 and IncX1. The mobile elements located up-and down-stream mainly included ISEcp1 (complete or incomplete) and IS903 or orf477 were found, respectively. Phylogenetic analysis showed that the CC10 strains were genetically diverse and divided into several distinct lineages. In this study, we found that CC10 ESBL-producing pathogenic E. coli has been steadily isolated; particularly, CTX-M-15-producing E. coli O25:H16 isolates were the major type related with distribution in CC10 clones during the last decade. Identification of ESBL-producing pathogenic E. coli CC10 isolates highlights the possibility of the emergence of resistant isolates with epidemic potential within this CC. Therefore, continuous monitoring will be conducted to prevent further spread of resistant ESBL-producing E. coli CC10 strains.

Atherogenic lipoproteins may impair vascular reactivity, leading to tissue damage in various organs, including the eye. This study aimed to investigate whether ophthalmic artery reactivity is affected in mice lacking the apolipoprotein E gene (ApoE-/-), a model for hypercholesterolemia and atherosclerosis. Twelve-month-old male ApoE-/- mice and age-matched wild-type controls were used to assess vascular reactivity using videomicroscopy. Moreover, vascular mechanics, lipid content, levels of reactive oxygen species (ROS), expression of pro-oxidant redox enzymes and of the lectin-like oxidized low-density lipoprotein receptor-1 (LOX-1) were determined in vascular tissue. Unlike the aorta, the ophthalmic artery of ApoE-/- mice developed no signs of endothelial dysfunction and no signs of excessive lipid deposition. Remarkably, levels of ROS, nicotinamide adenine dinucleotide phosphate oxidase 1 (NOX1), NOX2, NOX4, and of LOX-1 were increased in the aorta but not in the ophthalmic artery of ApoE-/- mice. Our findings suggest that ApoE-/- mice develop endothelial dysfunction in the aorta by increased oxidative stress via involvement of LOX-1, NOX1 and NOX2, whereas NOX4 may participate in media remodeling. In contrast, the ophthalmic artery appears to be resistant to chronic apolipoprotein E deficiency. Lack of LOX-1 expression/overexpression in response to increased ox-LDL levels may be a possible mechanism of action.

This study aimed to evaluate if the change of vehicle for CTZ (chloramphenicol, tetracycline, zinc oxide, and eugenol) paste improves the inhibition of Enterococcus faecalis in vitro. The vehicles evaluated alone and mixed with CTZ were eugenol, propylene glycol (PG), chitosan, su-per-oxidized solution (SOS), grapefruit-seed extract (GSE), and as a negative control, 0.9% saline solution. A clinical isolated of E. faecalis was morphological and biochemical characterized, in-cluding antimicrobial susceptibility was tested using 20 antimicrobial agents. Once character-ized, the clinical isolated was cultivated to performed Kirby–Bauer disc diffusion method with paper discs embedded with the different vehicles mixed or used alone, incubating at 37 ºC for 24 h. Data were analyzed by One-way ANOVA and the means were compared using Tukey test with a significance level of p<0.05. For vehicles used alone, GSE presented the greatest inhibition showing a statistically significant difference with the rest of the vehicles. When vehicles were mixed with the CTZ paste, PG showed a greater inhibition with a statistically significant differ-ence from the rest of the vehicles. In conclusion, the vehicle used to mix the CTZ paste plays an im-portant role in the inhibition of E. faecalis in vitro, therefore we consider that this can be an im-portant factor to achieve success in the use of this technique.

This research used an experimental study design in which 60 subjects were randomly assigned to either an experimental (image e-book guidance) group or a control (text guidance) group after meeting the admission conditions and agreeing to participate in the study. It was proven that providing image e-book guidance before surgery significantly changed the behavior of patients and promoted relief of urinary catheter discomfort through self-efficacy to reduce urinary catheter pain after surgery. It was found that providing image e-book guidance can shorten the time for health education and provide patients with repeated medical education and familiarity with health guidance, which can help to address the important clinical service demand issue and the shortage of nursing staff.

The development of mobile internet technology has enabled companies to use social media for E-commerce. Some companies use personified images and languages to communicate with consumers in this context. How does personified communication affect consumer behavior in social commerce? Are consumers willing to accept this new form of communication under social commerce? To answer these questions, this paper explores consumers' willingness to take per-sonified communication in the context of social commerce. It investigates the role of cognitive needs in regulating the internal mechanism and proposes some suggestions for enterprises to improve social media communication. Specifically, this paper presents an improved model based on the TAM model. In our model, perceived interaction is introduced as a new independent variable, and cognitive need is added as a regulatory variable, which is more suitable for social commerce. We conduct a questionnaire survey on the Internet and analyze data using AMOS and SPSS. The results show that perceived usefulness and perceived interaction positively im-pact attitude, which influences consumers' willingness to purchase. Furthermore, the cognitive need as the regulatory variable significantly affects the influencing path from perceived use-fulness to attitude and purchase intention.

We survey the diversity of antimicrobial resistance profiles of Escherichia coli (E. coli) isolates and molecular genotypes by means of phylogenetic groups circulating in complex aquatic habitats, such as sewage and receiving waters bodies as well as in clinical environment in Boeotia regional district of Greece. The predominant resistant profile among all environmental and clinical isolates was to penicillins - ampicillin (AMP) and piperacillin (PIP). ESBLs resistance related profiles were observed both in environmental and clinical isolates. Phylogenetic group B2 was the predominant in clinical isolates, whilst group A was dominant in environmental isolates. We report that reclaimed river water and wastewater are reservoirs of R and MDR E. coli to commonly used antibiotics in clinical practice posing putative threats for human and animal health.

Controlling water and food contamination by pathogenic organisms requires quick, simple, and low-cost methods. using affinity between mannose and type I fimbriae in the cell wall of Escherichia coli bacteria as evaluation elements compared to the conventional plate counting technique enables a reliable sensing platform for the detection of bacteria. In this study, a simple new sensor based on electrochemical impedance spectroscopy (EIS) for rapid and sensitive detection of Escherichia coli was developed. Biorecognition layer of the sensor was formed by covalent attachment of p-carboxyphenylamino mannose (PCAM) to gold nanoparticles (AuNPs) electrodeposited on the surface of glassy carbon electrode (GCE). The resultant structure of PCAM was characterized and confirmed using FTIR. The developed biosensor demonstrated a linear response with a logarithm of bacterial concentration (R2 = 0.998) in the range of 1.3 × 10 1~ 1.3 × 106 CFU.mL−1with the limit of detection of 2 CFU.mL−1 within 60 min. The sensor did not generate any significant signals with two non-target strains, demonstrating high selectivity of the developed biorecognition chemistry. Selectivity of the sensor and its applicability to analysis of the real samples was investigated in samples of tap water. Overall, the developed sensor has shown to be promising for the detection of E. coli pathogen in water due to its high sensitivity, short detection time, low cost, high specificity, and user-friendliness.

This article aims to provide a comprehensive understanding of vaping from various perspectives that contributes to the origin, development, achievement, and consequences of the greed of e-cigarette manufacturers. In our analysis, multiple elements of the social landscape, including economic, cultural, moral, psychological, and philosophical dimensions, contributed to the origin and development of the vaping greed and shaped people’s behaviors. Further discussion was made on how the specific characteristics of e-cigarette products and the marketing strategies of the companies, especially social media marketing, fostered the growth of such greed. Through interviews, we have also discussed the unfolding of this greed within the community of teenage vapers. The growth of the vaping greed was manifested in the large market share taken by the companies, but these all significantly harm people’s health and the communities. Nicotine and other chemicals in e-liquids promote each other’s negative effects in the mechanism leading to pulmonary symptoms and addiction, which are not limited to the physical level. We described that addiction could be transgenerational and can induce trauma both at an individual level and a community level. Overall, the greed of the vaping industry is a very complex system. The treatment of the greed shall be complicated as well: Besides the public health measures taken to treat the symptoms of the greed, we should educate individuals to be aware of their unfulfilled needs to regain authenticity and establish an infallible authority to enforce universal morality, which eradicates the complications of addiction and the root of the capitalists’ greed, respectively.

Economic globalisation has promoted the extensive circulation of commodities around the world, and international trade has increasingly been a strong booster for economic growth in China. As an foundation for national economy, the shift of agricultural products (AP) from production to distribution has become the focus of agricultural development, and in recent years, the international trade of agricultural products in China has been the highest in the world. While, cross-border e-commerce (CBE), as one of the important modes of agricultural products circulation, has brought new opportunities for China's fresh agricultural products to carry out online import and export trade under the favourable policies continuously introduced internationally. This research analyses status of APCBE in Yunnan Province, China, and propose strategies for developing CBE of Yunnan AP.

This study aimed to assess prescription transfer and medicines collection through Wasfaty, an electronic prescription service recently introduced in Saudi Arabia. A link to a cross-sectional online questionnaire was sent to all students and staff at the University of Jeddah, targeting beneficiaries who received e-prescriptions at the University Medical Centre (n = 2067). The questionnaire comprised 20 items under the following sections; demographics, patient perceptions and satisfaction with the Wasfaty service, and the availability of medicines. Of the 217 questionnaires received, the majority were filled by females (n = 125, 57.6%). Most were satisfied with the initial registration process of Wasfaty (n = 183, 84.1%). However, almost one-third of the participants reported that they could not find the prescribed medicines (n = 64, 29.7%), and most of them had to look for another pharmacy to obtain their treatment (n = 138, 63.9%). Respondents voiced their displeasure owing to the lack of access to certain pharmaceuticals, including anti-hypertensives and antidiabetics. This pilot study identified some challenges relating to the use of the Wasfaty service. Further attention to these challenges is required from the service providers, and a large-scale national study is warranted.

Digitalisation is one of the European Union's priorities. The European Parliament is shaping and helping to shape new legislation in this area. Digitisation should also help in the transition to a greener economy and in achieving climate neutrality. E-government is one area of digitisation that has been under way for several years in European countries. In this paper, we have focused on identifying different indices that are aimed at measuring digitalization or e-Government. The results of the analysis showed that there are several indices that focus on this area within the EU, such as EGDI, EPI, LOSI, DGI, e-Government benchmark, Eurostat - internet use, GII, DSGI, Going Digital toolkit and DESI. Subsequently, the index areas to be used in the DEA method to measure the effectiveness of e-Government related inputs and outputs within the EU were identified. As can be seen from the analysis, the DEA method has various uses. In order to be able to use the method properly it was necessary to select the most appropriate parameter and to verify their suitability by means of correlation analysis. Among the input and output indices were chosen Internet usage, DSGI, GII, e-Government benchmark, Interaction with public administration online. From the analysis 3 inputs and 3 outputs were used. After implementing the correlation, it can be said that the values between the selected sub-variables are suitable for DEA analysis. Two models were chosen for the calculation, namely CCR and BCC model. CCR model evaluated 10 states as efficient and BCC model evaluated 13 states as efficient. In addition, in the close analysis, we have taken a closer look at the CCR model's inference. Countries such as Denmark, Finland, Estonia, Malta, Portugal, etc. were efficient outliers. When comparing the regions within the EU, we can conclude that the countries of Northern Europe are the most efficient in the field of digitalization (e-Government). As many as 4 countries out of 7 are efficient. In a future study it would be useful to use the SBM model and try to measure the impact of digitalization on selected areas such as economy, society, environment, etc.

In recent years, online learning has become one of the most popular methods of educational delivery due to advances in technology, which has been made even more evident in the COVID-19 lockdown period. Online education has evolved into a distinct field of study within the educational system over the last few years. It is also important to note that parallel with the growth in this field, there has also been an increase in the number of scholarly journals that regularly publish research in this field, reflecting the importance of this field in the modern day. In spite of the fact that online learning offers a wide range of educational options, from short courses to full-time degrees, as well as being accessible, flexible, environmentally friendly, and affordable, there are also certain challenges associated with this educational approach. These challenges include the lack of social interaction, technical errors, a lack of hands-on training, and difficulties in assessing students. It is, therefore, imperative to ask the crucial question of whether online learning can replace traditional classroom learning or whether it can supplement it in hybrid models with it, as well as what factors and conditions are likely to determine this in the short- and long-term, as well as how it will be blended together in the future. The purpose of this commentary is to provide a brief summary of the current status of both learning models, as well as their pros and cons, in order to answer the question that was posed above.

Digital technologies play a key role in reviving the world economy. The EU has pledged to combine recovery support with resilient digital transformation. The COVID-19 pandemic highlighted the lack of digitization in Slovakia and the shortcomings of digital skills in citizens and communication with institutions. Digital skills are important and should form part of educational policy. ICT skills can help people succeed in the labour market and improve communication with public administration. Digitization and globalization increase the importance to communicate through the Internet, applications and other e-based gadgets. Digital skills are one of the essential parts of e-Government, so people can use e-Government services in communication with public administration. The current crisis citizens' use of online services. In-dices concerning the digital economy are analysed, such as the digital economy and society index DESI and e-government digital skills (EGDI) from 2018 to 2021 revealed a stagnant state in 2018 and 2019 and 2020, there was a decrease in basic digital skills". The next index is E-Government Digital Index It focuses on human capital and digital skills in these indices. The paper analyses and identifies the digital skills of citizens in the context of e-Government development and describes the use of e-Government services by EU citizens with a focus on the Slovak republic. The data were collected through a questionnaire survey with citizens in Slovak republic's digital skills according to selected categories, the use of e-Government services as well as awareness of e-Government services. Solutions that improve e-government in the Slovak Republic are gradually being implemented. Improving digital skills according to National Coalition for Digital Skills and professions in the Slovak republic and is one of the priorities of The Ministry of Education, Science, Research and Sport of the Slovak Republic which has adopted an action plan for 2019 – 2022 to improve the results in the DESI index by 2025 and focus on the digital skills required by employers. The survey revealed that in Slovakia, the majority of schools offer only weak support for digital education (about the EU-27 average of 68% and 45%, respectively). The research revealed also decreased level of digital literacy among young people. These competencies are very important to gain a position in the labour market in the digital society. The projects aim to support the development of digital skills of primary and secondary school students, and the integration of new technologies into teaching.

Toxins present in cigarette and e-cigarette smoke constitute a significant cause of illnesses and are known to have fatal health impacts. Specific mechanisms by which toxins present in smoke impair cell repair are still being researched and are of prime interest for developing more effective treatments. Current literature suggests toxins present in cigarette smoke and aerosolized e-vapor trigger abnormal intercellular responses, damage mitochondrial function, and consequently disrupt the homeostasis of the organelle’s biochemical processes by increasing reactive oxidative species. Increased oxidative stress sets off a cascade of molecular events, disrupting optimal mitochondrial morphology and homeostasis. Furthermore, smoking-induced oxidative stress may also amalgamate with other health factors to contribute to various pathophysiological processes. An increasing number of studies show that toxins may affect mitochondria even though exposure to secondhand or thirdhand smoke. This review assesses the impact of toxins present in tobacco smoke and e-vapor on mitochondrial health, networking, and critical structural processes including mitochondria fission, fusion, hyperfusion, fragmentation, and mitophagy. The efforts are focused on discussing current evidence linking toxins present in first, second, and thirdhand smoke to mitochondrial dysfunction

Modern electronic textiles are moving towards flexible wearable textiles, so-called e-textiles that have micro-electronic elements embedded onto the textile fabric that can be used for varied classes of functionalities. There are different methods of integrating rigid microelectronic components into/onto textiles for the development of smart textiles, which include, but are not limited to, physical, mechanical and chemical approaches. The integration systems must satisfy being flexible, lightweight, stretchable and washable to offer a superior usability, comfortability and non-intrusiveness. Furthermore, the resulting wearable garment needs to be breathable. In this review work, three levels of integration of the microelectronics into/onto the textile structures are discussed, the textile-adapted, the textile-integrated, and the textile-based integration. The textile-integrated and the textile- adapted e-textiles have failed to efficiently meet being flexible and washable. To overcome the above problems, researchers studied the integration of microelectronics into/onto textile at fiber or yarn level applying various mechanisms. Hence, a new method of integration, textile-based, has risen to the challenge due to the flexibility and washability advantages of the ultimate product. In general, the aim of this review is to provide a complete overview of the different interconnection methods of electronic components into/onto textile substrate.

Inappropriate antimicrobial treatment can pose a risk for developing resistance against antimi-crobial drugs in bacteria. Close human contact might have a higher chance of being transmitted to humans from sheep if the sheep population is a potential reservoir of zoonotic pathogens such as shiga toxin-producing Escherichia coli (E. coli) (STEC). Therefore, this study aimed to exam-ine the sheep population in rural Bangladesh for antimicrobial resistant STEC. We screened 200 faecal samples collected from sheep in three Upazila from the Chattogram district. Phenotypical-ly positive E. coli isolates were examined for two shiga toxin-producing genes – stx1 and stx2. PCR positive STEC isolates were investigated for the presence of antimicrobial resistance genes- blaTEM, sul1 and sul2. In total, 123 of the 200 tested samples were confirmed positive E. coli by cul-tured based methods. PCR results show 17(13.8%) E. coli isolates harboured ≥ one virulent gene (stx1 or/and stx2) of STEC. Six of the tested STEC isolates exhibited blaTEM gene; eight STEC isolates had sul1 gene, and sul2 gene was detected in ten STEC isolates. To our knowledge, this study is the first to reveal a significant proportion of STEC isolated from sheep in rural Bangla-desh harbouring antimicrobial resistance genes.

The e-commerce platform in the digital economy era has evolved into a data platform ecosystem built around data resources and data mining technology systems. The most typical applications of big data are also concentrated in the field of e-commerce. E-commerce companies should first grasp the interactive relationship among the three major factors of data, technology and innovation, e-commerce platform operation is a multidisciplinary research field. It is not easy for researchers to obtain a panoramic view of the knowledge structure in this field. Knowledge graph is a kind of graph that shows the development process and structure relationship of knowledge with the field of knowledge as the object. It is not only a visual knowledge mapping, but also a serialized knowledge pedigree, which provides researchers with a quantitative research method for the development trend of statistics and academic status. The purpose of this research is to help researchers understand the key knowledge, evolutionary trends and research frontiers of current research. This study uses Citespace bibliometric analysis to analyze the data of the Science Net database and finds that: 1) The development of the research field has gone through three stages, and some representative key scholars and key documents have been recognized; 2) the common knowledge mapping of literature The co-occurrence of citations and keywords shows research hotspots; 3) The results of burst detection and central node analysis reveal research frontiers and development trends. Today, the visualization of big data brings different challenges. The abstraction between the world and today's data visualization occurs when the data is captured. Every user sees his own visualization data generated by standardized calculations. At the same time, there are still many controversies in the theoretical model, structure and structural dimensions. This is the direction that future researchers need to further study.

The COVID-19 pandemic is shifting teaching to an online setting all over the world. The Galaxy framework facilitates the online learning process and makes it accessible by providing a library of high-quality community-curated training materials, enabling easy access to data and tools, and facilitates sharing achievements and progress between students and instructors. By combining Galaxy with robust communication channels, effective instruction can be designed inclusively, regardless of the students' environments.

Universitas Sebelas Maret (UNS) through SMART UNS Company has conducted research and development of e-motorcycle conversion using Li-ion battery pack as a substitute for ICE energy source from the conventional motorcycle. Currently, the battery-pack that used for e-motorcycle conversion is in the development phase towards commercialization. The challenge of estimating production costs is the complicated production process and storing hidden expenses that can be a problem. This hidden cost is often a missing or varied factor that costs less or more expensive. This study presents an integrated parametric cost estimation model with activity-based cost assignments to estimate production costs through cost calculations for each activity. Activity-based costs break the production process into a specific cost element for each step. Each activity's cost is put into a parametric cost estimation model to calculate the cost of each activity into the total cost of production. Cost estimation results will be analyzed using a regression method to determine which variables most affect the production cost of Li-ion battery packs for the conversion of e-motorcycles in the SMART UNS company.

Based on K-ε Standard Wall turbulence model (2-Equation) and Navier-Stokes (N-S) equations defined for incompressible fluids, fluid flow behaviour around hyperloop pods in an evacuated tube was simulated using ANSYS fluent solver assuming steady state and two dimensional conditions. In this research, to develop the case studies, using combination of different head and tail shape profile, four kind of hyperloop pods were developed with the aid of SolidWorks. These four pods have been investigated for their aerodynamic behaviour as four different case scenarios. The results of simulation depicts that an atmospheric pressure of 100 Pa with blockage ratio of 0.36 in tube provides the best possible aerodynamic behaviour for the designed hyperloop pod models. This research finds that overall aerodynamic behaviour of hyperloop pods can be varied by changing the head and tail shape profile of pods and a particular combination of head and tail shape profile can provide optimally best aerodynamic capabilities. Thus, this research paper provides a novel method of obtaining best aerodynamic capabilities in hyperloop pods by designing head profile optimally in combination with tail profile. This outcome will provide major contribution towards the development of hyperloop pods in future with better aerodynamic behaviour resulting in lesser electrical energy required to propel the hyperloop pods in evacuated tube.

We describe the draft genome of a Bovine enterovirus (EV) recovered from sewage in Nigeria. The virus replicates on both RD and L20B cell lines, but is negative for all EV screens in use by the GPEI. It contains 7,368nt, with 50.2% G+C content and an ORF with 6,525nt (2,174aa).

Several studies have quantified the responses of Eucalyptus globulus plantations to weed control on its early development (2-3 years after establishment). However, long-term results of competing vegetation effects have been rarely incorporated into growth and yield models that forecast the long-term effects of reducing the intensity of competing vegetation control and its interaction with site resource availability on stem volume production close to rotation age. We compared several models predicting stand stem volume yield of Eucalyptus globulus plantations established across a water and fertility gradient growing under different intensity levels of free area of competing vegetation maintained during the first 3 years of stand development. Four sites were selected encompassing a gradient in rainfall and amount of competing vegetation. Treatments were applied at stand establishment and were monitored periodically until age 9 years. Competing vegetation control intensity levels considered 0, 5, 20, 44 and 100% weed-free cover around individual E. globulus seedlings. Maximum competing vegetation biomass production during the first growing season were 2.9, 6.5, 2.2 and 12.9 Mg ha^-1, for sites ranging from low to high annual rainfall. As expected, reductions in volume yield at age 9 years were observed as competing vegetation control intensity decreased during the first growing season. A strong relationship was established between stem volume yield loss and the intensity of competing vegetation control, the amount of competing vegetation biomass produced during the first growing season and mean annual rainfall. The slope of the relationship was different among sites and was related mainly to water and light limitations. Our results, suggest that the biomass of competing vegetation (intensity of competition) affecting site resource availability, contribute to observed long-term effects on E. globulus plantations productivity. The site with the lowest mean annual rainfall showed the highest volume yield loss at age 9 years. Sites with highest rainfall showed contrasting results related to the amount of competing vegetation biomass.

Analyzing the cells in various body fluids can greatly deepen the understanding of the mechanisms governing the cellular physiology. Because of the variability of physiological and metabolic states, it is important to be able to perform such studies on individual cells. Therefore, we developed an optofluidic system in which we precisely manipulated and monitored individual cells of Escherichia coli. We used laser tweezers Raman spectroscopy (LTRS) in a microchamber chip to manipulate and analyze individual E. coli cells. We subjected the cells to antibiotic cefotaxime, and we observed the changes by the time-lapse microscopy and Raman spectroscopy. We found observable changes in the cellular morphology (cell elongation) and in Raman spectra, which were consistent with other recently published observations. We tested the capabilities of the optofluidic system and found it to be a reliable and versatile solution for this class of microbiological experiments.

There has been widespread criticism about the rates of participation of students enrolled on MOOCs (Massive Open Online Courses), more importantly, the percentage of students who actively consume course materials from beginning to the end. This study sought to investigate this trend by examining the factors that influence MOOC adoption and use by students in selected Ghanaian universities. The Unified Theory of Acceptance and Use of Technology (UTAUT) was extended to develop a research model. A survey was conducted with 270 questionnaires administered to students who had been assigned MOOCs; 204 questionnaires were retrieved for analysis. Findings of the study show that MOOC usage intention is influenced by computer self-efficacy, performance expectancy, and system quality. Results also showed that MOOC usage is influenced by facilitating conditions, instructional quality, and MOOC usage intention. Social influence and effort expectancy were found not to have a significant influence on MOOC usage intention. The authors conclude that universities must have structures and resources in place to promote the use of MOOCs by students. Computer skills training should also be part of the educational curriculum at all levels. MOOC designers must ensure good instructional quality by using the right pedagogical approaches and also ensure that the sites and learning materials are of good quality.

Nowadays, the transparency of governments with respect to the sustainability of public services is a very interesting issue for stakeholders and academics. It has led to previous research and international organisations (EU, IMF, OECD, United Nations, IFAC, G-20, World Bank) to recommend promotion of the online dissemination of economic, social and environmental information. Based on previous studies about e-government and the influence of administrative cultures on governmental accountability, this paper seeks to identify political actions useful to improve the practices of transparency on economic, social and environmental sustainability in European local governments. We perform a comparative analysis of sustainability information published on the websites of 72 local governments in 10 European countries grouped into main three cultural contexts (Anglo-Saxon, Southern European and Nordic). Using international sustainability reporting guidelines, our results reveal significant differences in local government transparency in each context. The most transparent local governments are the Anglo-Saxon ones, followed by Southern European and Nordic governments. Based on individualized empirical results for each administrative style, our conclusions propose useful policy interventions to enhance sustainability transparency within each cultural tradition, such as development of legal rules on transparency and sustainability, tools to motivate local managers for online diffusion of sustainability information and analysis of information needs of stakeholders.

Introduction The prevalence of adolescent electronic cigarette (e-cigarette) use has increased in most countries. This study determines the relation between the frequency of e-cigarette use and the frequency and intensity of cigarette smoking. Furthermore, it evaluates the association between the reasons for e-cigarette use and the frequency of its use. Materials and Methods Participants were 68,043 middle and high school students aged 13–18 years from the 2015 Korean Youth Risk Behavior Web-Based Survey. Of the 68,043 participants, we analyzed 6,655 adolescents with an experience of e-cigarette use. Results The prevalence of ever using and current (past 30 days) use of e-cigarettes was 10.1% and 3.9%, respectively. Of the ever e-cigarette users, approximately 40% used e-cigarettes for ≥1/month and 8.1% used e-cigarettes daily. Daily e-cigarettes users were 10 times greater among daily cigarette smokers than among cigarette users for <1/month (18.1% vs. 1.8%) and 16 times more prevalent among those smoking ≥20 cigarettes/day than among those smoking <1 cigarette/month (38.9% vs. 2.4%). The most common reason for e-cigarette use was curiosity (22.9%), followed by less harmful than conventional cigarettes (18.9%), smoking cessation (13.1%), and indoor use (10.7%). Curiosity was the most common reason among less frequent e-cigarette users; however, smoking cessation and indoor use were the most common reasons among more frequent users. Conclusions Results showed a positive relation between frequency or intensity of conventional cigarette smoking and frequency of e-cigarette use among Korean adolescents, and frequency of e-cigarette use differed according to the reason for the use of e-cigarettes.

Hepatitis E virus (HEV) is a common cause of acute hepatitis worldwide, accounting for approximately 25% of deaths among pregnant women. We previously reported that pregnancy serum facilitates HEV replication in vitro. However, the differences in host cells with HEV infection induced by pregnancy serum and fetal bovine serum (FBS) are unclear. In this study, differentially expressed proteins were identified in HEV-infected hepatoma cells (HepG2) supplemented with different sera by using isobaric tags for relative and absolute quantitation. Proteomic analysis indicated that HEV infection significantly induced 1014 differentially expressed proteins in HEV-infected HepG2 cells when supplemented with FBS compared with pregnancy serum. Further validation by Western blot confirmed that filamin A, heat-shock proteins 70 and 90, Cytochrome c, and Thioredoxin were associated with HEV infection. This comparative analysis provides an important basis to further investigate HEV pathogenesis in pregnant women and HEV replication.

Dengue virus (DENV), the causative agent of dengue fever (DF), is one of the most important mosquito-borne viruses that can infect humans. Although much effort has been made on prevention and control of dengue, there are currently no anti-viral drugs or worldwide approved vaccines yet. In this study, we immunized six-week-old Balb/c mice with DNA vaccine candidates E and NS1-2a of DENV serotype 2 or the combination of them (E+NS1-2a) via an electroporation (EP)-assisted intramuscular gene delivery system and evaluated the immune response and protection. The highest specific antibody titres and cytokine levels secreted by splenocytes as well as the highest survival rate were observed in the E+NS1-2a group, followed by E group and NS1-2a group. Our data suggested that the combination of E and NS1-2a delivered by EP may be a superior preventive strategy against DENV.

The DnaA protein has long been considered to play the key role in the initiation of chromosome replication in modern bacteria. Many questions about this role, however, remain unanswered. Here, we raise these questions within a framework based on the dynamics of hyperstructures alias large assemblies of molecules and macromolecules that perform a function. In this dynamics, hyperstructures can (1) emit and receive signals or (2) fuse and separate from one another. We ask whether the DnaA-based initiation hyperstructure acts as a logic gate receiving information from the membrane, the chromosome and metabolism to trigger replication; we try to phrase some of these questions in terms of DNA supercoiling, strand opening, glycolytic enzymes, SeqA, ribonucleotide reductase, the Macromolecular Synthesis operon, post-translational modifications and metabolic pools. Finally, we ask whether, underpinning the regulation of the cell cycle, there is a physico-chemical clock inherited from the first protocells, and whether this clock emits a single signal that triggers both chromosome replication and cell division.

Abstract: The human race has always innovated, and in a relatively short time went from building fires and making stone-tipped arrows to creating smartphone apps and autonomous robots. Today, technological progress will undoubtedly continue to change the way we work, live, and survive in the coming decades. Since the beginning of the new millennium, the world has witnessed the emergence of social media, smartphones, self-driving cars, and autonomous flying vehicles. There have also been huge leaps in energy storage, artificial intelligence, and medical science. We are facing immense challenges in global warming and food security, among many other issues. While human innovation has contributed to many of the problems we are facing, it is also human innovation and ingenuity that can help humanity deal with these issues “New directions in science are launched by new tools much more often than by new concepts. The effect of a concept-driven revolution is to explain old things in new ways. The effect of a tool-driven revolution is to discover new things that have to be explained”. (F. Dyson, 1997 In this article, we review the impact of technology as evolving at beginning of 21st Century on future prospect of Energy demand either renewable or non-renewable form, Economy, to Ecommerce, Education and any other E-related of Modern Technology.

This paper is a detailed study on radio frequency identification (RFID) technology focused on its application for warehouse traceability in the company FRUMECAR. It highlights the importance of controlling the traceability of items in warehouses or logistics companies, highlighting the need for reliable, real-time information to effectively manage inventory and resolve incidents quickly. The paper discusses in depth what RFID is, its types, main components such as tags, readers, and antennas, as well as discussing how it works, advantages, disadvantages, and specific applications. It also examines factors such as return on investment, cost feasibility, and environmental factors that influence the implementation of RFID systems. The paper presents a practical approach, proposing RFID-based solutions to improve traceability in FRUMECAR, analyzing the current state of the company and its warehouses, with the aim of implementing an efficient system that allows real-time tracking of products.

Water networks are critical infrastructure components, ensuring the continuous supply of high-quality drinking water to consumers. To secure such water supply, regular maintenance, including the replacement of deteriorating pipelines, is essential. In this study, a methodology has been developed for determining optimal pipeline replacement solutions in water supply systems at water utilities with limited data availability. Hydraulic analysis has been conducted on the segment of 25 km of the water supply network using the free software EPANET. Applying water network optimization, eight pipeline replacement projects according to 13 pre-defined criteria have been identified and evaluated. The paper outlines the methods for evaluating the criteria, including defining specific quantitative limits. The Analytical Hierarchical Process (AHP) method was used in the paper to determine the weights of the criteria. The reason for applying this method refers to problems that involve a set of criteria with a mixed structure, including both quantitative and qualitative aspects. Also, the paper describes the steps of the multi-criteria optimization method VIKOR, used to select the optimal project. This paper, considered as case studie, describes a method, i.e. application of a new principles and an innovative way to solve a problem for developing countries.

The present distribution examines the effects of nozzle diameter, inlet mass rate, and channel geometry on the fuel distribution in annular combustion chambers of micro gas turbines, taking into account the importance of more uniform fuel distribution in the nozzles connected to the fuel supply channels. A comparison has been made between the numerically calculated pressure drop between the inlet and outlet of the fuel supply nozzle and the experimental value obtained. All fuel supply nozzles with a diameter of 500 micrometers are considered for the micro gas turbine. A more uniform distribution results in better combustion and higher efficiency. A geometrical change in the design of the fuel supply nozzle improved the uniformity of the flow distribution without increasing the pressure drop.

Plasma generation by means of electrical discharge requires specialized power supply systems. The applicability of plasma for various plasma processes depends on its parameters, and these in turn depend on the parameters of the power supply systems. Arc plasma can be unstable, generating a lot of electromagnetic interference and overvoltage and overcurrent. The power system of a plasma reactor must guarantee good plasma control characteristics, be immune to disturbances and ensure good cooperation with the power grid. The article analyzes the cooperation of a three-phase plasma reactor, with gliding arc discharge, with a power supply system of a new type. This system integrates an AC/DC/AC converter with a five-column transformer of special design in a single device. Using the properties of magnetic circuits, it was possible to integrate the functions of ignition and sustaining the burning of the discharge in the reactor in a single transformer. Proper design of the transformer is crucial to achieve good cooperation of the AC/DC/AC converter with both the plasma reactor and the power supply network. The presented power supply design shows a number of positive features predisposing it to powering arc plasma reactors.

Nowadays, with the development of laser weapons, the primary power supply of laser weapons puts forward more and more high demand for its performance. The pulsed power supply based on conventional homopolar inductor alternator (HIA) cannot meet the requirements any more. In order to improve the power density and efficiency, this paper proposes applying the high-temperature superconducting (HTS) HIA with slotless stator core to this power supply. In this paper, the design considerations of it are presented, and the comparisons between the two power supplies are discussed. The calculation results show that the power supply based on HTS machine has much larger power density than the conventional HIA, and the efficiency is also larger than the conventional HIA. This can improve the performance of laser weapons dramatically.

As fossil-fueled heating in the building sector is responsible for 16 % of Germanys total CO2 emissions, it is of great importance to use climate-neutral alternatives for the decarbonization of this sector. Options for the climate-neutral heating of buildings include electricity or hydrogen as energy carriers, both explicitly considered by German policy. In this paper, bottom-up studies are conducted to investigate the role of hydrogen for the climate-neutral energy supply of ten selected residential buildings in comparison to electricity-based systems. Based on a selection of as different typical buildings as possible for single- (SFH) and multi-family houses (MFH) of different construction years, demand profiles are simulated for each building and the respective cost-optimal supply system is determined. For the construction of this system, the electricity-based technologies available are electric heater and heat pump as well as the hydrogen-based technologies hydrogen boiler and fuel cell combined heat and power (CHP) system. Based on the results of the optimization, sensitivity analyses are performed. These analyses aim to identify threshold values of the hydrogen price for the use of hydrogen in building energy systems as well as to make the quantities of hydrogen consumed visible.The identified threshold values show the significant role of hydrogen-operated CHP in MFH if the hydrogen price reaches 0.17 €/kWh_H2 in 2050 at an electricity price of 0.31 €/kWh_el. So, hydrogen-based energy systems represent an economically viable alternative to electricity-based systems with heat pumps. We identify electricity to hydrogen price ratios for the economically viable use of hydrogen in the examined buildings that range from 1.67 to 2.82. According to these ratios, the economically reasonable use of hydrogen in buildings can be derived. For the individual building groups for the year 2050, a ratio of 2.5 can be determined for SFH and 1.8 for MFH, that is favored by the use of CHP which also supplies electricity to the buildings. However, the role hydrogen will finally play in German residential buildings in the future depends to a large extent on political decisions on distribution issues and price signals.

The specific demands inherent to supply chains built upon large IoT systems, make a must the design of a coordinated framework for cyber resilience provisioning intended to guaranteeing trusted supply chains of ICT systems, built upon distributed, dynamic, potentially insecure and heterogeneous ICT infrastructures. As such, the proposed solution is envisioned to deal with the whole supply chain system components, from the IoT ecosystem to the infrastructure connecting them, addressing security and privacy functionalities related to risks and vulnerabilities management, accountability and mitigation strategies as well as security metrics and evidence-based security assurance. In this paper we present FISHY, as a preliminary designed architecture, designed to orchestrate both existing and beyond state-of-the-art security appliances in composed ICT scenarios and also leveraging capabilities of programmable network and IT infrastructure through seamless orchestration and instantiation of novel security services, both in real-time and proactively. The paper also includes a thorough business analysis to go far beyond the technical benefits of a potential FISHY adoption as well as three real-world use cases where to strongly support the envisioned benefits of a FISHY adoption.

The threats of climate change and the sustainable supply of clean energy are global challenges that require an international approach to the energy supply. Utilizing the wind and solar energy potential of regions where these renewable sources are especially viable to produce hydrogen by means of water electrolysis represents an attractive option to counter the above-mentioned challenges. Within the scope of this techno economic analysis of a worldwide hydrogen supply infrastructure based on renewable energy, selected regions are assessed on the basis of their wind or solar energy potential. In contrast to established analyses of hydrogen infrastructures, this paper introduces a worldwide allocation approach to the supply hydrogen from strong wind and solar regions to different demand regions on the premise of a global supply cost minimum. The allocation results show a significant dependence of hydrogen export volumes and the oversea transport distances of potential trading partners. Hence, the transnational trading flows of hydrogen derived from wind and solar energy are concentrated in continental regions.

The future of the Colorado River water supply (WS) affects millions of people and the U.S. economy. A recent study suggested a cross-basin correlation between the Colorado River and its neighboring Great Salt Lake (GSL). Following that study, the feasibility of using the previously developed multi-year prediction of the GSL water level to forecast the Colorado River WS was tested. Time-series models were developed to predict the changes in WS out to 10 years. Regressive methods and the GSL water level data were used for the depiction of decadal variability of the Colorado River WS. Various time-series models suggest a decline in the 10-year-averaged WS since 2013 before starting to increase around 2020. Comparison between this WS prediction and the WS projection published in a 2012 government report (derived from climate models) reveals a widened imbalance between supply and demand by 2020. Further research to update similar multi-year prediction of the Colorado River WS is needed. Such information could aid in management decision making in the face of future water shortages.

Logistics Engineering has transcended over the decades into an approach for competitive benefits in organisational performance and logistics efficiency. Most industries are recognising that significant savings are available to companies that are able to ordinate and improve within their logistics operations. Companies today face great challenges because the successful supply of many products and services needs to the effective integration of logistics activities across a prolongation supply chain and an increasing geographical separation. Moreover, logistics integration approach involves both internal integration for an ordinated, unified process as well as relationships to react flexibly, changeability, and responsibility to customer's demands. In this study, by using of Fuzzy Vikor (F-Vikor), the best combination of RIR was selected and RIR Locating was done. The main aim of this paper is survey and design of the integrated operational logistics network (IOLN) and also, a proposed IOLN to integration of the Iran Khodro Co Supply Network.

The Distributed eLearning Center (DeLC) is a portal, providing extensive support in the day-to-day work when it comes to e-learning content – it helps students and teachers organize their learning materials, fill the gaps in knowledge (for students) and educational approaches (for teachers), organize and conduct exams, and overall, with providing proactive and personalized e-learning environment. The scope of DeLC as a project involves many extensions, covering the aspects of learning, teaching, exams, and collecting statistical information. Such extension is an agent-oriented environment, which enriches the functionalities with intelligent components, that are reactive and proactive, referred to as agents or assistants. This paper is focused on presenting the latest step in the evolution of FraudDetector software agent, which started with base functionality for fraud detection, and now it aims at usage of AI to accomplish its tasks, taking advantage not only from its knowledgebase, but from a much larger one, used by ChatGPT – through integration with it, which is the main contribution of this research, although the real results from production environment are still pending. In this process, agent’s architecture should stay open for collaboration with another external AI provider if necessary, trying to decouple the components, responsible for integration. As of now, the experiments show that involving ChatGPT in FraudDetector’s functionality enriches it and the agent’s precision could be improved this way.

By examining Planck's equation E=hν, one finds an analogy with accounting billing for electricity. Frequency and power have a physical dimension T-1, so one obtains an energy value accounted for over a time interval by multiplying them by this time interval. By investigating this analogy, one finds a surprising mistake in Planck's law for the frequency of black body radiation: confusion between two contexts, one for radiation power and one for a timeless energy density. One goes from one to the other by an accounting-type transformation: a multiplication by 4π/c or c/4π. Correcting this mistake makes a Planck constant h timeless, invalidating the photon definition and de Broglie’s wave-particle duality. Despite this mistake, one obtains the same value for the black body radiation; it goes unnoticed. Consequently, the Planck relation becomes P=hν, with the energy of a cycle equal to h, whatever the frequency. One can consider this cycle as a new photon, which behaves like a particle by its radiation pressure. Its energy-mass equivalence h=mɣc2 gives a mass of 4.134883524·10-15 eV, in the range referenced by the Particle Data Group. This correction of Planck's relation calls quantum physics into question.

Collecting and recording physiological parameters and forwarding this data via telemedicine or remote surveys may significantly increase the health and safety of people working under extreme environmental conditions, like firefighters, mountain rescuers, disaster control employees, military personnel, etc. First, ruggedized systems, as small, lightweight, and flexible as possible, are needed to optimize the goal of increasing occupational health and safety of persons at risk and maximizing their performance during missions. Previous systems could only record a very limited number of parameters, and a few could forward the data online to return information to the user. Therefore, in order to record several meaningful, valid, and reliable physiological parameters synchronized, an extension of existing systems is required. This review highlights this problem and gives an overview of the historical development. The actual status of the systems available was listed and described comparatively. In the end, a proven, promising, and innovative solution is presented that can solve the problem and allow people to work more safely in extreme environments, which may represent the future.

The cooking method is extremely important for the production of low-salt, wet-marinated, fermented golden pomfret because it strongly influences its flavor components and organoleptic quality. There are also significant differences in flavor preferences in different populations. The present study analyzed differences in the aroma characteristics of wet-marinated fermented golden pomfret after boiling, steaming, microwaving, air frying and baking using a combination of an electronic nose, GC-IMS and SPME-GC-MS. Electronic nose PCA showed that the flavors of the boiled (A), steam (B) and microwave (C) treatment groups were similar, and the flavors of baking (D) and air frying (E) were similar. A total of 72 flavor compounds were detected in the GC-IMS analysis, and comparative analysis of the cooked wet-marinated and fermented golden pomfret yielded a greater abundance of flavor compounds. SPME-GC-MS analysis detected 108 flavor compounds, and the results were similar to the baking and air frying. Twelve key flavor substances, including hexanal, isovaleraldehyde, and (E)-2-dodecenal, were identified by orthogonal partial least squares discriminant analysis (OPLS-DA) and VIP analysis. These results show that cooking method is a key factor in the flavor distribution of wet-marinated fermented golden pomfret, and consumers can choose the appropriate cooking method accordingly.

Hepatitis E virus is a major etiological agent of chronic hepatitis in immunosuppressed individuals. Studies on HEV in the context of liver transplantation have produced mixed results, most of the data coming from studies conducted in high-income countries. This was a prospective cohort study of liver transplant recipients in southeastern Brazil. Recipients were systematically followed for one year, with the objective of determining the prevalence, incidence, genotype, and natural history of HEV infection in this population. We included 107 liver transplant recipients and 83 deceased donors. Positivity for anti-HEV IgG was detected in 11 (10.2%) of the recipients and in eight (9.7%) of the donors. None of the patients tested positive for HEV RNA at baseline or during follow-up. There were no episodes of reactivation or seroconversion, even in cases of serological donor-recipient mismatch or in recipients with acute hepatitis. Acute and chronic HEV infections seem to be rare events in the region studied. That could be attributable to social, economic, and environmental factors. Our data indicate that, among liver transplant recipients, hepatitis E should be investigated only when there are elevated levels of transaminases with no defined cause, as part of the differential diagnosis of seronegative hepatitis after transplantation.

E-waste is considered the fastest-growing global waste stream and has become an emerging environmental challenge. The widespread usage of digital devices has generated a large amount of e-waste. According to the Ministry of Commerce, India annually generates ~14.5 lakh metric tons of e-waste and recycles only ~5 % of e-waste. Annually, the global production of e-waste has been expected to increase by 4–5 %. Advancements in IT and communication divisions have improved the usage of electronic equipment. Heavy metals such as (Pb), mercury (Hg), arsenic (As), tin (Sn), and organic chemicals such as polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), polybrominated biphenyls (PBBs), polybrominated dibenzo-p-dioxins (PBDDs), polybrominated diphenyl ethers (PBDEs) are subsequently released from e-wastes and contaminates soil and water sources. These toxic compounds are hazardous to human health and the environment. They are capable of entering various biological systems and causing alterations in respiratory functions of the lungs, DNA damage, impaired functioning of the thyroid, and increased risk of chronic diseases such as cancer and cardiovascular ailments. Such concerns raise the quintessential need to manage e-waste to prevent future hazards. This manuscript critically reviews the sources, health and environmental impact, disposal techniques, recycling, and regulation of e-waste.

Lignin, and its by-products in the effluent of most agrochemical-based industries like pulp and paper, increase environmental pollution. There is, therefore, an increasing demand to degrade lignin and its derivatives using bacteria-produced ligninolytic enzymes. This study focused on optimizing growth and lignin peroxidase production of ligninolytic potential bacterial strains (E. coli accession no: LR0250096.1 and P. aeruginosa accession no: CP031449.2) for the first time. A submerged fermentation process was used to simultaneously optimize growth and crude lignin peroxidase production using kraft lignin as the substrate. The E. coli and P. aeruginosa were separately cultured under different pH, temperature, lignin (substrate) concentration and incubation periods. It was observed that the enzyme production was growth dependent. The optimum conditions for E. coli were pH 7.5, temperature 30 °C and lignin concentration 1 g/L. For P. aeruginosa the best conditions were pH 6.5, temperature 40 °C and lignin concentration 1 g/L. The enzyme production peaked after 7 days of incubation for both organisms were 21.53 ± 3.11 mg/ml and 18.13 ± 2.1 mg/ml respectively. It is apparent that both E. coli (LR0250096.1) and P. aeruginosa (CP031449.2) are mesophiles bacteria. E. coli function best in alkaline pH while P. aeruginosa prefers a slightly acidic environment. Hence, they are promising candidates in the reduction of lignocellulosic wastes.

Enteric viruses are the major cause of gastroenteritis and enteric hepatitis worldwide, but in some areas like Saudi Arabia little data is known about their presence in water sources. The available information from clinical samples is not enough to figure their actual prevalence. The aim of this study was to gather information for the first time in Saudi Arabia on the presence of Norovirus (NoV) genogroup GI and GII, hepatitis A virus (HAV) and hepatitis E virus (HEV) in water. For this purpose, thirteen monthly samples were collected in lake Wadi Hanifa and surrounding wells from December 2014 to November 2015. Viruses were detected and quantified by Real-time RT-qPCR. Despite HEV findings were anecdotic, our results highlight interesting behaviors of the other viruses. There was a higher prevalence of noroviruses in Wadi Hanifa samples than in well water samples (46.43% vs12.5% of NoV GI; 66.67% vs8.33% of NoV GII). On the contrary, similar levels of HAV positivity were observed (40.48% in surface water vs 43.06% in well water). Also, a strong influence of flooding events on HAV and NoV GI occurrence was observed in both surface and well water samples, being NoV GII apparently not affected.

As customer demand for green products increases in the digital economic era, this study analyses the green innovation of the e-tailer and supplier in drop shipping models. Moreover, drop shipping e-tailers and suppliers with a drop shipping option need to make choices regarding whether to provide green or normal products to the market. When a supplier with a drop shipping option produces green products, more fees may be invested on the production of green products than on normal products. The drop shipping e-tailers and suppliers with a drop shipping option can also choose to sell normal products at a low cost, as before. This study designs four models of drop shipping e-teilers and suppliers with a drop shipping option under different choices, analyzes their operational process in drop shipping models, and investigates five theorems. The optimal pricings decisions and green degree of drop shipping e-tailers and suppliers with a drop shipping option were evaluated in this study. The impacts of the green innovation factor, green elasticity coefficient, manufacturing and distribution costs on the drop shipping e-tailers and suppliers with a drop shipping option, and the effect of other environmental parameters on the green degree of green products are also analyzed through computer simulation. The findings of the simulation analysis provide valuable guidance for e-tailers and suppliers with green innovation in drop shipping models and offer important academic and practical implications for e-commerce and the digital economy.

Mid-latitude sporadic-E (Es) is an intermittent phenomenon of the lower E region of the ionosphere. Es clouds are thin, transient, and patchy layers of intense ionization, with ionization densities which can be much higher than in the background ionosphere. Oblique reflection of radio signals in the very high frequency (VHF) range is regularly supported, but the mechanism for it has never been clearly established - specular reflection, scattering, and magnetoionic double refraction have all been suggested. This article proposes using the polarization behaviour of signals reflected from intense midlatitude sporadic-E clouds as an indicator of the true reflection mechanism. Results are presented from a measurement campaign in the summer of 2018, which gathered a large amount of data at a receiving station in the UK using 50 MHz amateur radio beacons as signal sources. In all cases the signals received were elliptically polarized, despite being transmitted with linear polarization; there were also indications that polarization behaviour varied systematically with the orientation of the path to the geomagnetic field. This represents, for all the examples recorded, clear evidence that signals were reflected from midlatitude Es by magnetoionic double refraction.

Extremely low concentrations of ciprofloxacin may select for antimicrobial resistance. A recent global survey found that ciprofloxacin concentrations exceded safe levels at 64 sites. We assessed if national median ciprofloxacin concentrations in rivers were associated with fluoroquinolone resistance in Escherichia coli. Methods Spearman’s regression was used to assess the country-level association between the national prevalence of fluoroquinolone resistance in E. coli and the median ciprofloxacin concentration in the countries rivers. Results The prevalence of fluoroquinolone resistance in E. coli was positively correlated with the concentration of ciprofloxacin in rivers (ρ=0.36; P=0.011; N=48). Conclusions Steps to reducing the concentrations of fluoroquinolones in rivers may help prevent the emergence of resistance in E. coli and other bacterial species.

We report on the successful preparation of wet dressings hydrogels based on Chitosan-Poly(N-Vinyl-Pyrrolidone)-Poly(ethylene glycol)-Poly(acrylic acid) and Poly(ethylene oxide) by e-beam cross-linking in weakly acidic media, to be used for rapid healing and pain release of infected skin wounds. The structure and compositions of hydrogels investigated according to sol-gel and swelling studies, network parameters, as well as FTIR and XPS analyses showed the efficient interaction of the hydrogel components upon irradiation, maintaining the bonding environment while the cross-linking degree increasing with the irradiation dose and the formation of a structure with the mesh size in the range 11-67 nm. Hydrogels with gel fraction above 85% and the best-swelling properties in different pH solutions were obtained for hydrogels produced with 15 kGy. The hydrogels are stable in the simulated physiological condition of an infected wound and show appropriate moisture retention capability and the water vapor transmission rate up to 272.67 g m-2 day-1, to ensure fast healing. The hydrogels proved to have a significant loading capacity of ibuprofen (IBU), being able to incorporate a therapeutic dose for the treatment of severe pains. Simultaneously, IBU was released up to 25% in the first 2h, having a release maximum after 8h.

There is an increasing clinical need to develop novel biomaterials that combine regenerative and biocidal properties. In this work, we present the preparation of silver /silica based glassy bioactive (ABG) compositions via a facile, fast (20h), and low temperature (80 °C) approach and their characterization. The fabrication process included the synthesis of the bioactive glass (BG) particles followed by the surface modification of the bioactive glass with silver nanoparticles. The microstructural features of ABG samples before and after exposure to simulated body fluid (SBF) as well as their ion release behavior during SBF test were evaluated using infrared spectrometry (FTIR), ultraviolet- visible (UV-Vis) spectroscopy, X-ray diffraction (XRD), electron microscopies (TEM and SEM) and optical emission spectroscopy (OES). The antibacterial properties of the experimental compositions were tested against Escherichia coli (E. coli). The results indicated that the prepared ABG materials possess antibacterial activity against E. coli, which is directly correlated with the glass surface modification.

In recent years information and communication technologies (ICT) play a significant role in all aspects of modern society and impact socioeconomic development in sectors as education, administration, business, medical care and agriculture. The benefits of such technologies in agriculture can be appreciated only if farmers use them. In order to predict and evaluate the adoption of these new technological tools, the technology acceptance model (TAM) can be a valid aid. The paper measures the potential acceptance of an e-learning tool designed for EU farmers and agricultural entrepreneurs. Starting from a literature review of the technology acceptance model, by analyzing the most commonly used external variables in the fields of e-learning, Agriculture, and Virtual reality, the analysis shows that computer self-efficacy, individual innovativeness, computer anxiety, perceived enjoyment, social norm, content and system quality, experience and facilitating conditions are the most common determinants addressing technology acceptance. Furthermore, findings evidenced that the external variables have a different impact on the two main beliefs of the TAM Model, Perceived Usefulness (PU) and Perceived Ease of Use (PEOU). This study is expected to bring theoretical support for academics when determining the variables to be included in TAM extensions.

Many various using of this new-born fuzzy model for solving real-world problems and urgent requirements involve introducing new concept for analyzing the situations which leads to solve them by proper, quick and ecient method based on statistical data. This gap between the model and its solution cause that we introduce nikfar domination in neutrosophic graphs as creative and eective tool for studying a few selective vertices of this model instead of all ones by using special edges. Being special selection of these edges aect to achieve quick and proper solution to these problems. Domination hasn't ever been introduced. So we don't have any comparison with another de nitions. The most used graphs which have properties of being complete, empty, bipartite, tree and like stu and they also achieve the names for themselves, are studied as fuzzy models for getting nikfar dominating set or at least becoming so close to it. We also get the relations between this special edge which plays main role in doing dominating with other special types of edges of graph like bridges. Finally, the relation between this number with other special numbers and characteristic of graph like order are discussed.

This study was undertaken to derive and analyze the Advanced Microwave Scanning Radiometer - EOS (AMSR-E) sea surface temperature (SST) footprint associated with the Remote Sensing Systems (RSS) Level-2 (L2) product. The footprint, in this case, is characterized by the weight attributed to each 4  4 km square contributing to the SST value of a given AMSR-E pixel. High-resolution L2 SST fields obtained from the MODerate-resolution Imaging Spectroradiometer (MODIS), carried on the same spacecraft as AMSR-E, are used as the sub-resolution “ground truth“ from which the AMSR-E footprint is determined. Mathematically, the approach is equivalent to a linear inversion problem, and its solution is pursued by means of a constrained least square approximation based on the bootstrap sampling procedure. The method yielded an elliptic-like Gaussian kernel with an aspect ratio  1.58, very close to the AMSR-E 6.93GHz channel aspect ratio,  1.7. (The 6.93GHz channel is the primary spectral frequency used to determine SST.) The semi-major axis of the estimated footprint is found to be alignedwith the instantaneous field-of-view of the sensor as expected fromthe geometric characteristics of AMSR-E. Footprintswere also analyzed year-by-year and as a function of latitude and found to be stable – no dependence on latitude or on time. Precise knowledge of the footprint is central for any satellite-derived product characterization and, in particular, for efforts to deconvolve the heavily oversampled AMSR-E SST fields and for studies devoted to product validation and comparison. A preliminarly analysis suggests that use of the derived footprint will reduce the variance between AMSR-E and MODIS fields compared to the results obtained.

This research assess the effects of training program based on the usage of the digital learning objects in teaching practice at the Northern Borders University staff. E Assessment through the tablets and smart phones and the teachers’ attitudes towards such way of evaluation is the major objective of this study as the researcher expects that the assessment mechanism in the university through utilization of tablets and smart phones and its application will inevitably bring in a systematic improvement in the assessment and evaluation process of the curricula. Moreover, making use of the e learning objects in training will make a significant change in e training program of the university. Hence, the researcher has chosen voluntary random samples from the university teaching staff (men\women) from various different faculties (medicine, medical sciences, science, education and arts, business administration, home economics, and science and literature). These samples included 300 members of the teaching staff. In a group of 20 to 25 members, a personal training was conducted regarding the usage of tablets and smart phones and its applications in the assessment process. Each group participated by producing a complete e-assessment for their students in the Northern Borders University and by the e learning system i.e. Blackboard and Question Mark. The research also depends on the semi-experimental design of multiple groups and on testing the groups’ pre and post achievement tests. In addition, the research identifies the level of the university teaching staff in using the tablets and the smartphones and its applications in the assessment process by the note card that the individuals have during the test.

Vitamin A and E are important during pregnancy, the neonatal period, and childhood. The objective of this study was to assess whether maternal RRR-a-tocopherol supplementation affects serum and breast milk retinol. Serum was collected at baseline and twenty days later, and breast milk, at baseline, and on days 1, 7, and 20 after delivery. After the baseline serum collection, the supplemented group (n=16) received a single 400 IU of RRR-α-tocopherol. The control group (n=18) was only performed collections. Retinol and alpha tocopherol levels were determined by liquid chromatography. Serum retinol and alpha tocopherol at baseline and 20 days after delivery indicated proper vitamin A (> 20 µg/dL) and E (> 516 μg/dL) statuses in the control and supplemented groups (p > 0.05). Colostrum retinol levels on days 1 and 7 after delivery were significantly higher in the supplemented group (p = 0.018 and p = 0.012, respectively). Maternal vitamin E supplementation increased colostrum retinol by 52.23% and 111.2%, 24 hours and 7 days, respectively. However, retinol in mature milk did not differ between the groups (p > 0.05). In conclusion, the supplementation with 400 IU of RRR-α-tocopherol improved vitamin A bioavailability in breast milk.

Lectins are carbohydrate-interacting proteins playing a pivotal role in multiple physiological and developmental aspects of all organisms. They can specifically interact with different bacterial and viral pathogens through the carbohydrate-recognition domains (CRD). In addition, lectins are also of biotechnological interest because of their potential use as biosensor for capturing and identification of bacterial species. In this work, we have characterized the bacterial agglutination properties of three C-type lectins from the Lepidoptera Spodoptera exigua. One of these lectins, BLL2, was able to agglutinate cells from a broad range of bacterial species at an extremely low concentration, becoming a very interesting protein to be used as biosensor or other biotechnological applications involving bacterial capturing.

IgE-mediated wheat allergy is a gluten-related disorder. Wheat is one of the five most common food allergens in children. However, the natural history of IgE-mediated wheat allergy has seldom been described in the research literature. This study presents the current state of knowledge about the IgE-mediated wheat allergy in children.

This study addresses the prediction of recurring failures in water supply networks, a complex and costly task, but essential for the effective maintenance of these vital infrastructures. Using historical failure data provided by Companhia de Água e Esgotos da Paraíba (CAGEPA), the research focuses on predicting the time until the next failure at specific points in the network. The authors divided the failures into two categories: Occurrences of New Faults (ONF) and Recurrences of Faults (RF). To make the predictions, they used predictive models based on Machine Learning, more specifically on MLP (Multi Layer Perceptron) neural networks. The study revealed that, by analyzing data from past failures and considering factors such as altitude, number of failures on the same street and days between failures, it is possible to achieve an accuracy greater than 80% in predicting failures within a 90-day interval. This demonstrates the feasibility of using fault history to predict future water supply outages with significant accuracy. These forecasts allow water utilities to plan and optimize their maintenance, minimizing inconvenience and losses. The article contributes to the field of water infrastructure management by suggesting that the data-driven approach can be applied in other cities or in networks of different types, such as energy or communication networks. The conclusions highlight the importance of data collection and analysis in preventing failures and optimizing water utilities’ resources.

This study investigates the relationship between housing prices and vacancy rates in Hong Kong, offering insights distinct from previous cross-sectional analyses. Addressing limitations in data availability and methodological approaches, the study examines annual data spanning multiple housing size categories to uncover nuanced dynamics in the housing market. Two major contributions emerge: firstly, the analysis reveals the price elasticity of vacancy, elucidating how housing prices respond to changes in vacancy rates over time. Secondly, by considering housing vacancy changes as outcomes of the interactions between supply and demand, the study challenges the conventional independence assumption between these variables. The results support the hypothesis that housing vacancies exert a negative impact on housing prices, holding other factors constant. These findings have significant implications for policymakers, urban planners, and real estate investors, providing valuable insights for crafting targeted interventions and informing investment decisions.

The implementation of residential distributed generation (DG) in South America has shown significant growth in the last decade, driven by increased research on photovoltaics and renewable energy sources. Regulatory policies and business models have been crucial in fostering the adoption of DG in the region, with residential self-supply being the most receptive sector for implementing the concept. This article presents a literature review on DG as applied to residential self-supply in South America by comprehensively analyzing documents published between 2013 and 2023, applying the PRISMA methodology. In total, 37 literature resources have been systematically selected and reviewed to contribute to the identification of trends and developments in the field of DG in the residential sector, as well as highlighting areas that require further research and attention from stakeholders, including policymakers, investors, technology providers and consumers in the South American context.

Poultry eggs are a critical source of protein, vitamins, and minerals for people worldwide; facing the current global egg shortage is a significant concern. The shortage results from various factors, including avian flu outbreaks, changes in consumer demand, and supply chain disruptions caused by the COVID-19 pandemic. The economic crisis caused by the pandemic has also impacted the availability and affordability of eggs, particularly in low-income countries. The global egg shortage has implications for public health, particularly for vulnerable populations who rely on eggs for essential nutrients. One Health, an approach that recognizes the interconnectedness of human, animal, and environmental health, provides a useful framework for understanding and addressing the egg shortage. One Health approaches to the egg shortage involve collaboration between agriculture and environmental sectors to address the root causes of the lack and ensure the sustainable production and distribution of eggs. Addressing the global egg shortage requires a multifaceted approach considering the complex social, economic, and environmental factors. One Health perspectives offer a way to understand and address the interconnected factors contributing to the shortage to ensure access to affordable, nutritious eggs for all in a healthy way

This article provides a comprehensive analysis of the global gas and liquefied natural gas (LNG) markets. The article begins by discussing the increasing demand for gas and LNG, particularly in Asia, as countries aim to transition to cleaner sources of energy. It explores how market volatility has led to energy security interventions and lasting economic and emissions impacts. It then explores the global supply and demand dynamics, highlighting the structural change expected in the market and the competition between Europe and Asia for limited new LNG supply. The article also focuses on Europe's increased flexibility and dependence on LNG imports, which have risen by 60% to 121 million tonnes, offsetting lower Russian pipeline imports. Furthermore, the article delves into global supply and demand dynamics, how the market is expected to remain tight, and how record gas and LNG prices have led to demand reductions. Additionally, it analyzes the future outlook and investment needs, highlighting the continued uptake of gas in heavy-duty transport and the need for further investment to avoid a supply-demand gap. The article concludes with an analysis of the implications for the future of the global gas and LNG markets.

The quickest and easiest way to avoid greenhouse gas (GHG) emissions is to purchase renewable electricity and offset the remaining emissions. However, the industrial sector’s electricity needs already exceed renewable electricity generation. Moreover, electricity accounts for only one third of the industry’s energy needs. Simultaneously, the advance of sectoral coupling and the decarbonisation of industrial processes, as well as the desire to rapidly decrease dependence on fossil fuels, are creating significant additional demand for renewable energy. Neither existing nor planned generation and transmission infrastructure will suffice to meet the expected short-term demand. Based on survey data from the German Industry Energy Efficiency Index, this article therefore examines the share of GHG savings that companies intend to achieve on- and off-site. Understanding how much additional generation and transmission capacity is needed by the industry to decarbonise and by when is crucial to identify and address the extent of excess demand. On average, companies plan to avoid 22 % of their 2019 emissions by 2025 and 27 % by 2030, primarily through on-site measures. In combination with the extrapolation of the entire industry’s needs for off-site capacity, the data calls for a rapid expansion of planning authority and green generation capacities.

Given the recent emergence of Rift Valley Fever (RVF) in Rwanda and its profound impact on livelihoods and health, improving RVF prevention and control strategies is crucial. Vaccinating livestock is one of the most sustainable strategies to mitigate the impact of RVF on health and livelihoods, yet vaccine supply chain constraints severely limit the effectiveness of vaccination programs. In the human health sector, unmanned aerial vehicles, i.e., drones, are increasingly being used to improve supply chains and last-mile vaccine delivery. We investigated perceptions on whether delivering RVF vaccines by drone in Rwanda might help to overcome logistical constraints in the vaccine supply chain. We conducted semi-structured interviews with stakeholders in the animal health sector and Zipline employees in Nyagatare District in the Eastern Province of Rwanda and used content analysis to identify key themes. We found that stakeholders in the animal health sector and Zipline employees believe that drones could improve RVF vaccination in Nyagatare. The main benefits study participants identified included decreased transportation time, improved cold chain maintenance, and cost savings.

The general circuit topology and principles of low-noise high-voltage power supply are investigated to meet the requirements of the high-voltage bias application in air kerma meters. Two topologies, flyback converter and Royer converter are simulated using SPICE simulation program. The simulation results indicate that the circuit structure of the Royer converter is more complex, but it obtains lower output high voltage noise. While we develop an adjustable high-voltage power supply according to the circuit structure of the Royer converter, and tested it to ensure the design requirements for continuously adjustable output high-voltage linearity. The test results show that the linear adjustment rate is not more than ±0.0025%, the load regulation rate is less than ±0.1%, and the output ripple noise voltage percentage is less than 0.01%. These tested performance make it more suitable for accurate nuclear measurements.

The paper explains the dynamics of monetary aggregates in Russia with the help of country's trade balance, the creation of deposits by commercial banks and cross-border flows of rubles and (foreign) currency. The volumes of deposits and flows, in turn, depend on changes in the currency/ruble exchange rate and favorable external economic conditions. The model was estimated by the Kalman filter, the adequacy was confirmed by stimulation. Monthly money supply forecasts have an accuracy of ~ 1%. It was found that the volume of additional deposits created per month is ~ 300 billion RUB (this leads to real inflation of 9.5% per annum), money flows that are not related to payments for goods: rubles inflow from abroad ~ 100 billion RUB, currency goes abroad ~ 15 billion USD. With the growth / fall of the dollar exchange rate by 1 RUB per month, during the same month, the creation of additional ruble deposits and the arrival of rubles from outside decreases / increases by 0.114 billion USD. The increase of the Currency Reserve Assets of Russia is accompanied by going abroad ~ 5% of the increase.

“Money has always been something of an embarrassment to economic theory. Everyone agrees that it is important; indeed, much of macroeconomic policy discussion makes no sense without reference to money. Yet, for the most part theory fails to provide a good account for it.” (Banerjee and Maskin, 1996, p. 955)The debate about whether or not a growth imperative exists in debt based, interest bearing mone- tary systems has not yet been settled. It is the goal of this paper to introduce a new perspective in this discussion.For that purpose an SFC computational model is constructed which simulates a post Keynesian Endogenous Money system without including economic parameters such as production, wages, consumption and savings. A case is made that isolating the monetary system allows for better analysis of the inherent properties of such a system.Loan demands, which are assumed to happen, are the driving force of the model. Simulations can be run in two modes, each based on a different assumption. Either the growth rate of the money stock is assumed to be constant or the loan rate, expressed as a percentage of the money stock, is assumed to be constant.Simulations with varying parameters are run in order to determine the conditions under which the model converges to stability, which is defined as converging to a bounded debt rate.The analysis shows that stability of the model is dependent on net bank profit ratios, expressed relative to their debt assets, remaining below the growth rate of the money stock. Based on these findings it is argued that the question about the existence of a growth imperative in debt based, interest bearing monetary systems needs to be reframed. The question becomes whether a steady state economy can realistically support such a system without destabilising it. In order to answer this question real world behavior of economic actors must be included in the model.It is concluded that there are indications that it might not be feasible for a steady state economy to support a stable debt based, interest bearing monetary system without strong interventions. However, more research is necessary for a definite answer. Real world observable data should be analysed through the lens of the presented model to bring more clarity.

Unpaid family caregivers might suffer losses in income as a result of care provision. Here we used data from the baseline survey of the China Health and Retirement Longitudinal Study to assess the relationship between hours of weekly caregiving provided to grandchildren/parents/parents-in-law and individual’s monthly employment income. Our study sample comprised 3,718 middle-aged Chinese adults who were of working age (45-60 years). For women and men separately, we used a likelihood-based method to determine a caregiving threshold in a two-stage Heckman selection procedure. Instrumental variables were used to rule out the endogeneity of caregiving hours. Our analysis revealed a negative association between caregiving and income for women that depended on a caregiving threshold of 63-hours per week. There was an absence of caregiving-income relationship among men. These results offer new insights into the opportunity costs of unpaid caregiving and support tailored policies to protect the financial well-being of female caregivers.

In light of the latest trends in global installed capacities, the importance of variable renewable energy sources (VRES) to future energy supply systems is evident. Despite this, the inherent intermittency of VRES remains an obstacle to their widespread adoption. Green hydrogen is often suggested as an energy carrier that can account for this in a sustainable manner. In the analysis, a robust European energy system in the context of 2050 and with 100% VRES energy supply is designed through an iterative minimal cost-optimization approach that ensures robust security of supply over 38 weather-year scenarios (1980-2017). The impact of spatial VRES variability is factored in by defining exclusive VRES groups within each optimization region and, from this, it can be seen that higher numbers of groups in each region offer cheap electricity generation locations to the optimizer and thus decrease the total annual cost of the system. Beyond this, the robust system design and impact of inter-annual variability is identified by iteratively combining the installed capacities of different system designs obtained by applying 38 historical weather years. The robust system design outlined here has significantly lower capacities in comparison to the maximum regional capacities obtained in the first round of optimization.

Global financial investments in energy production and consumption are significant since all aspects of a country's economic activity, and development require energy resources. In this paper, we assess the investment trends in the global energy sector during, before and after financial crises of 2008 using two data sources: (1) Dealogic database providing cross‐border mergers and acquisitions (M&As), and (2) fDi Intelligence fDi Markets database providing greenfield (GF) foreign direct investments (FDIs). We highlight the changing role of China and compare its M&A and GF FDI activities to those of the United States, Germany, UK, Japan and others during this period. We analyze the investments along each segment of the energy supply chain of these countries to highlight the geographical origin and destination, sectoral distribution, and cross‐border M&As and GF FDI activities. Our paper shows that while energy accounts for nearly 25% of all GF FDI, it only accounts for 4.82% of total M&A FDI activity in the period 1996-2016. China's outbound FDI in the energy sector started its ascent around the time of the global recession and had accelerated in the post-recession phase. In the energy sector, the development of China's outbound cross‐border M&As is similar to USA or UK, located mostly in the developed countries in the west, while their outbound GF investments are spread across many countries around the world. Also, China's outbound energy M&As are concentrated in certain segments (extraction, and electricity generation) while their GF covers all segments of the energy supply chain.

Secondary transportation of raw and comminuted forest products is a major component in forest harvesting operations in terms of economics, public perception, and safety. Consequently, there is a substantial amount of literature on this topic. The existing literature has dealt with many of the technical aspects of transportation with a majority of them focusing on improving supply chain issues; However, there are only few specific to secondary transportation issues in general. This annotated bibliography will help practitioners, researchers, and stakeholders gain a better understanding of the existing literature from 2000 to 2015. To this end, we began by classifying the selected literature into six themes: cost, roads and routes, trucking, efficiency & safety, other modes of transportation, and supply chain & optimization. Woody biomass for bioenergy production was the most researched forest product with respect to transportation. About one-third of the articles were presented in the context of supply chain modeling and optimization. More than half of the studies originated from Europe while the United States had the most publications for any given country. The most articles (16) were published in 2013. Biomass and Bioenergy published the highest number of articles (29) during the timeframe.

Quantum-dot cellular automata (QCA) is an emerging transistor-less field-coupled nanocomputing (FCN) approach to ultra-scale ‘nanochip’ integration. In QCA, to represent digital circuitry, electrostatic repulsion between electrons and the mechanism of electron tunnelling in quantum dots are used. QCA technology can surpass conventional complementary metal-oxide semiconductor (CMOS) technology in terms of clock speed, reduced occupied chip area, and energy efficiency. To develop QCA circuits, irreversible majority gates are typically used as the primary components. Recently, some studies have introduced reversible design techniques, using reversible majority gates as the main building block, to develop ultra-energy efficient QCA circuits. However, this approach resulted in time delays, an increase in the number of QCA cells used, and an increase in the chip area occupied. This work introduces a novel hybrid design strategy employing QCA irreversible, reversible, and partially reversible gates to establish an optimal balance between power consumption, delay time, and occupied area. The hybrid technique allows the designer to have more control over the circuit characteristics to meet different system needs. A combination of reversible, irreversible, and innovative partially reversible majority gates is used in the proposed hybrid design method. We have evaluated the hybrid design method by examining the half-adder circuit as a case study. We have developed four hybrid QCA half-adder circuits, each of which simultaneously incorporates various types of majority gates. The QCADesigner-E 2.2 simulation tool was used to simulate the performance and energy efficiency of the half-adders. This tool provides numerical results for the circuit input/output response and heat dissipation at the physical level, within a microscopic quantum mechanical model.

In recent years, the prevalence of tobacco and electronic cigarette (e-cigarette) use among adolescents has raised significant public health concerns worldwide. This study aims to investigate respiratory symptoms among Polish adolescents. We conducted an online survey among Polish school students from all provinces, collecting data over two months in Spring 2021. Students voluntarily complete the anonymous survey, answering questions about respiratory symptoms, smoking habits (both traditional and electronic cigarettes), and demographic information. Analysis focused on four subgroups: non-tobacco users, traditional cigarette smokers, e-cigarette users, and dual users, totaling 10,388 pupils aged 12-18 years, predominantly attending secondary technical and comprehensive schools. A total of 10388 pupils participated in the study, 55.6 % (5778) of whom were girls and 44.4 % (4610) boys. Adolescents, who admitted using both e-cigarettes and traditional cigarettes experienced more frequent episodes of cough during the day (39.70%) and at night (18.40%) compared to their peers in other groups. Chest discomfort, including pain and pressure, was also reported more often by adolescents, who used e-cigarettes and traditional cigarettes concurrently (27.60%) compared to their peers in other groups. Chest pressure was experienced less commonly by non-smoking adolescents (14.40%) than by smokers (18.90%). Higher severity of cough during the day and at night was observed in the group of adolescents using traditional cigarettes and e-cigarettes concurrently compared to the other groups. The adolescents in the dual user group experienced more severe dyspnoea and wheezing compared to the other groups included in the comparison. The results of this study confirm the correlation between the occurrence of respiratory symptoms in adolescents who smoke cigarettes, use e-cigarettes and in dual users. The respiratory symptoms occur most frequently and are the most severe in the group of adolescents who use e-cigarettes and traditional cigarettes

Multimedia resources, such as instructional videos, are currently enjoying a certain popularity in training programmes for medical and dental students. The major challenge is to create such resources that have quality content and are acceptable to students. We investigated the opinions of a sample of 551 students from 4 medical universities in Romania in order to identify the characteristics of the instructional videos that students prefer and we comparatively analysed these characteristics according to gender, age group, but also according to their general preferences for using Internet services. We used univariate (hypothesis testing) and multivariate (Two-Step Clustering) data analysis techniques and revealed three clusters of students, primarily determined by perceptions of the visual appearance of instructional videos. The structure of the clusters by gender and age group is relatively similar, but we recorded differences between them associated with students' expressed preferences for certain Internet services compared to others. Students who prefer instructional videos to contain images used only for aesthetic purposes, to fill in breaks, use Internet services mainly for communication, while students who prefer in videos the use of already drawn explanatory diagrams are slightly younger than the others and use Internet services mainly for information and communication.

Several pathotypes of enteric E. coli have been identified. The group represented by Shiga toxin-producing E. coli (STEC) is of particular interest. Raw milk and raw milk products are significant sources of STEC infection in humans; therefore, identifying pathogens at the herd level is crucial for public health. Most national surveillance programs focus solely on raw milk and raw milk cheeses that are ready for retail sale, neglecting the possibility of evaluating the source of contamination directly at the beginning of the dairy chain. In order to assess the viability of new molecular methodologies applied to raw milk filters enabling the identification of the presence of STEC serotypes in milk production and apply the same methods to identify the presence of these pathogens in calf feces we analyzed, through a commercial real-time PCR assay, a total of 290 samples coming from 18 different dairy herds; 88 bulk tank milk (BTM), 104 raw milk filters (RMF) and 98 calves’ feces samples. In total 3.4% of BTM, 41.4% of RMF and 73.4% of calves’ feces tested positive for stx presence, supporting our hypothesis that BTM is not a suitable matrix to assess the STEC presence at herd level, underestimating it. Our conclusion is that the surveillance program needs critical and extensive improvements such as RMF and calves’ feces analysis implementation in order to be more efficient in detecting and preventing STEC infections. The epidemiology of these infections and the characteristics of the pathogen clearly show how a One Health approach will be pivotal to improve our capabilities to control the spread of these infections.

The aim of this study was to identify factors, that influence satisfaction and dissatisfaction in the use of public e-procurement. The use of IT solutions promotes sustainable development. Hence, there is a need to conduct research that will allow for the best possible adjustment of e-procurement solutions in order to implement them as widely as possible in business practice. This study used a quantitative exploratory survey-based approach. The obtained research results were analyzed using statistical methods, including factor analysis PCA. Factor analysis identified three main satisfaction factors and two dissatisfaction factors in e-procurement use, highlighting the importance of support, intuitiveness, and security in user satisfaction. This study contributes to the existing literature by providing a nuanced understanding of the factors influencing user satisfaction and dissatisfaction within e-procurement systems, specifically highlighting the role of intuitive design and technical support. It offers a unique perspective by integrating these insights with the specific requirements of public procurement, thereby filling a gap in research on enhancing user experience in the context of sustainable purchasing practices.

Online learning is gaining massive popularity with time. The e-learning platforms operate differently from traditional educational institutions and hence need different strategy for course recommendations. This survey aims to cover the major emerging research areas in e-learning recommender systems. Our study covers different areas of research including graph-based methodologies, ITS, query optimization, content-based, and collaborative filtering, big data, and association rules mining. This survey aimed to explore all major emerging directions of recommender systems in education. This study analyzed existing literature in all of the areas mentioned before and performed objective-based analysis. A brief performance analysis was also done for the researches where the values were comparable. Limitations of existing researches were also identified and studied to shed some light on future directions.

This study assessed the impacts of genotypes, environments, and their interaction on the performance of elite cowpea lines for key adaptive, grain yield, and associated traits across different locations. A total of 42 elite genotypes were evaluated in five Nigerian environments, representing various savanna ecologies during the 2021 growing season. The experimental design employed was an alpha lattice arrangement, replicating each genotype three times. The results revealed significant differences among genotypes, environments, and genotype-by-environment interaction for most traits, including days to maturity, 100 seed weight, and grain yield. GGE biplot showed G21 (IT14K-2111-2) and G25 (IT15K-2386-1) as the most stable genotypes across the five environments, G41(IT1K-61-82) was best adapted to Ibadan and Shika, G5 (245-1) was best adapted to Bagauda and Gumel while G30 (IT16K-2365-1) was best adapted to Bauchi. G21 and G25 could be recommended across the five test environments while G41, G30 and G5 are specific to the adapted environments.

Background In many African countries, clinical samples are not routinely tested for carbapenem-resistant bacteria, the resistance data remaining limited. Material and methods In March 2020 –June 2022, we collected extended spectrum β-lactamase (ESBL) -producing Enterobacterales (ESBL-PE) isolates from five hospitals in Burkina Faso. The species were identified using API20E and ESBL production confirmed by double-disc synergy test. Production of carbapenemases and AmpC-β-lactamases and phenotypic co-resistance were determined. Results Among the 473 ESBL-PE, 356 were ESBL- E. coli (ESBL-Ec) and 117 Klebsiella spp. (ESBL-K). Of the isolates, 5.3% were carbapenemase and 5.3% AmpC-β-lactamase positive Three types of carbapenemases were identified: 19 NDM, 3 OXA-48 like and 1 VIM. Two isolates produced both NDM and OXA48-like carbapenemases. Carbapenemase rates were highest among isolates in tertiary hospitals. Co-resistance rates were up to 85% for aminoglycosides, 90% for sulfonamides, 95% for fluoroquinolones and 25% for chloramphenicol, Fosfomycin resistance was 6% for ESBL-Ec and 49% for ESBL-K (49%). Conclusion Many ESBL-Ec and ESBL-K co-produced carbapenemases and/or AmpC-β-lactamases, at all healthcare levels and in various samples, with high co-resistance rates to non-betalactams. Carbapenem resistance is no longer rare, calling for testing in routine diagnostics, vigorous resistance surveillance system, and infection control within healthcare.

Shared micromobility has gained significant attention in the field of transportation engineering in recent years as an environmentally friendly, convenient, and easily accessible transportation mode. Like other medium-sized cities, Birmingham, Alabama implemented a shared micromobility pilot program in 2021 that captured the attention of local travelers. This study examined shared e-scooter usage and associated travel patterns in Birmingham using 2021-2022 field data. From these data, ArcGIS maps were used to showcase trip origins and destinations. To gain a further understanding of e-scooter travel patterns in the study area, zip code and block group densities were calculated. Additionally, a negative binomial regression model was constructed to identify determinants of shared e-scooter trips. The analysis results showed that the usage of shared e-scooters was the highest during the nighttime, on weekends, and in the fall season. Furthermore, the research findings indicated that shared e-scooters experienced their highest utilization rates in areas with a higher proportion of educated and higher-income individuals. These findings suggest that travelers’ mode choice related to the use of micromobility modes is influenced by environmental and demographic factors. Overall, this case study offers valuable contributions to the understanding of the role of shared e-scooters in Birmingham's transportation landscape and can guide transportation authorities in other medium-sized cities in their efforts to plan for micromobility options.

Telemedicine, telehealth, e-Health, and other related terms refer to the exchange of medical information or medical care from one site to another through electronic communication between a patient and healthcare provider. As telemedicine infrastructure has changed since the COVID-19 pandemic, this review provides an overview of telemedicine use and effectiveness in cardiology, with emphasis on the post-pandemic context. Pre-pandemic studies tend to report statistically insignificant or modest improvements in cardiovascular disease outcome from telemedicine use to usual care. By contrast, post-pandemic studies tend to report positive outcomes or comparable acceptance of telemedicine use to usual care. Today, telemedicine can effectively replace in person follow-ups to produce comparable (but not necessarily superior) outcomes in cardiovascular disease management. A major benefit of telemedicine is the significant reduction in follow-up time or time-to-intervention which may lead to earlier detection and prevention of adverse events. Nonetheless, there remain barriers to effective telemedicine implementation in the post-pandemic context. Providing accuracy and ease-of-use of telemedicine devices, ensuring adherence to remote rehabilitation procedures, and implementing widespread telemedicine infrastructure are such examples. Current knowledge gaps include the true economic cost of telemedicine infrastructure, feasibility of use in specific cardiology contexts, and sex/gender differences of health outcomes through telemedicine use. Future telemedicine developments will need to address these concerns to achieve widespread acceptance as the new standard of care.

Isoamyl (E)-3-(3,4-dimethoxyphenyl)acrylate (1) was obtained 95% yield by 2-methyl-6-nitrobenzoic anhydride (MNBA)/4-dimethylaminopyridine (DMAP)-catalyzed reaction at room temperature for 190 minutes in dichloromethane. The structure of isoamyl (E)-3-(3,4-dimethoxyphenyl)acrylate (1) was established by NMR, FTIR, and the high resolution of mass spectroscopies. In vitro sun protection factor evaluation exhibited value of 37.10 ± 0.03 which indicates that isoamyl (E)-3-(3,4-dimethoxyphenyl)acrylate (1) as a sunscreen agent with high protection.

(1) Background: Formation of biofilms on food-contact surfaces by Shiga-toxigenic Escherichia coli (STEC) can pose a significant challenge to the food industry, making conventional control-methods insufficient. Targeted use of bacteriophages to disrupt these biofilms could reduce this problem. Previously isolated and characterized bacteriophages (n=52) were evaluated against STEC biofilms in-vitro and on food-contact surfaces. (2) Methods: Phage-treatments (9 logs PFU/ml), in phosphate-buffered-saline, were used individually or as cocktails. Biofilms of STEC (O157, O26, O45, O103, O111, O121, and O145) were formed in 96-well micro-titer plates (7 logs CFU/ml; 24 h) or on stainless-steel (SS) and high-density-polyethylene (HDPE) coupons (9 logs CFU/cm2; 7 h), followed by phage-treatment. Biofilm-disruption was measured in-vitro at 0, 3, and 6 h as a change in optical-density (A595). Coupons were treated with STEC-serotype-specific phage-cocktails or a 21-phage cocktail (3 phages/serotype) for 0, 3, 6 and 16 h and surviving STEC populations enumerated. (3) Results: Of the 52 pages, 77% showed STEC-biofilm disruption in-vitro. Serotype-specific phage-treatments reduced pathogen population within the biofilms by 1.9-4.1 and 2.3-5.6 logs CFU/cm2, while the 21-pahge cocktail reduced it by 4.0 and 4.8 logs CFU/cm2 on SS and HDPE, respectively. (4) Conclusions: Bacteriophages can be used to reduce STEC and their biofilms.

This qualitative study explores the implementation and conformation process of digital devices in teaching and learning before, during, and after the COVID-19 pandemic in Nepal. Using Rogers' Diffusion of Innovation Theory as a framework, the study examines the adoption and adaptation of digital devices by in-service secondary mathematics teachers (n=62) and their perceptions and preferences towards instructional modality. The findings suggest that despite the increased reliance on digital devices during the pandemic, there is a less likelihood of using them in face-to-face classrooms in developing countries like Nepal. The adoption of online learning has not yet reached the confirmation stage, even after the onset of the COVID-19 pandemic. Prior to the pandemic, online learning was not widely implemented or confirmed by teachers in developing countries societies. The study also provides important insights into the challenges and opportunities of using digital devices in post-COVID-19 classrooms, and its implications for policymakers and educators in Nepal.

Introduction. Until now, the impact of learning variables on consumers' choices concerning Chinese product brands in the international online shopping framework remains unknown. Accordingly, this study aims to examine the effect of those learning variables on global consumers' choices of Chinese product brands. Method. A total of 44,704 transactions related to the buying process have been collected from a programming language and the Octopus Software within a Chinese International Online Shopping platform. Analysis. The 44,704 transactions have been analyzed through a Decision Tree. Results. The study points out that the number of e-retailers' subscribers reinforces the international consumers' trust online. At the same time, the pricing levels and quantity of product availability are used by global online consumers to assess the originality of Chinese product brands. Conclusions. First, this study extends the existing literature on consumer learning by going beyond the learning variables considered. Second, the study boosts consumer learning literature by elucidating the most significant learning variables guiding international online consumers' choices and purchases. The application of the results will enable brands and e-retailers to understand (1) the stages of the international online consumers' choice; (2) the buying strategies of global consumers.

In West Africa, research on the hepatitis E virus (HEV) is barely covered despite the recorded outbreaks. The still low level of access to safe water and adequate sanitation is one of the main factors of HEV spread in developing countries. HEV infection induces acute or sub-clinical liver diseases with a mortality rate ranging from 0.5 to 4%. The mortality rate is more alarming (15 to 25%) among pregnant women, especially in the last trimester of pregnancy. Here, we conducted a multicentric socio-demographic and seroepidemiological survey of HEV in Senegal among pregnant women. A total of 1,227 consenting participants attending antenatal clinics responded to our questionnaire. Plasma samples were collected and tested for anti-HEV IgM and IgG by using the WANTAI HEV-IgM and IgG ELISA assay. HEV global seroprevalence was 7.9% with 0.5% and 7.4% for HEV IgM and HEV IgG, respectively. One participant's sample was IgM/IgG positive, while four were declared indeterminate to anti-HEV IgM as per the manufacturer's instructions. From one locality to another, the seroprevalence of HEV antibodies varied from 0 to 1% for HEV IgM and from 1.5 to 10.5% for HEV IgG. The data also showed that seroprevalence varied significantly by marital status (p&lt;0.0001), by the regularity of income (p=0.0043) and by access to sanitation services (p=0.0006). These data could serve as a basis to setup national prevention strategies focused on socio-cultural, environmental and behavioral aspects for a better management of HEV infection in Senegal.

The emergence of acute, severe non hepA–E hepatitis of unknown etiology (ASHUE) has attracted global concern owing to the very young age of the patients and its unknown etiology. Although this condition has been linked to several possible causes, including viral infection, drugs, and/or toxin exposure, the exact cause remains unknown; this makes treatment recommendations very difficult. In this review, we summarize recent updates on the clinical manifestations, complemented with laboratory results, case numbers with the global distribution and other epidemiological characteristics, and the possible etiologies. We also provide the proposed actions that could be undertaken to control and prevent further spread of this hepatitis. Since many etiological and pathological aspects of the acute non hepA–E hepatitis remain unclear, further research is needed to minimize the severe impact of this disease.

The growth of the fаshion industry in Bаndung, which is increаsing every yeаr, if it is not bаlаnced with the аpplicаtion of digitаlizаtion аnd the use of the lаtest technology, it would be very unfortunаte. Аpаrt from the increаse in the number of internet users, the online shopping style by the community is аlso one of the driving forces for the growth of e-commerce, especiаlly in the midst of the current Covid pаndemic situаtion. This study will exаmine the аdoption of e-commerce technology to sell online in the midst of the Covid pаndemic to fаshion industry plаyers in Bаndung using these vаriаbles: effort expectаncy, performаnce expectаncy, fаcilitаting conditions, sociаl influence, existing hаbits, hedonic motivаtion, and also the price vаlue in the UTАUT2 model. So thаt it cаn show how the contribution of the аdoption of e-commerce technology to the behаviourаl intention аnd use behaviour of the fаshion industry consumers in Bаndung. Our research use quаntitаtive approach, cаusаl research/study with Structurаl Equаtion Modeling (SEM) аnаlysis technique using the SMАRTPLS 3.2.9 softwаre. Reseаrchers chose the аccidentаl sаmpling with а totаl of 400 respondents. Аll exogenous vаriаbles аffect behаviourаl intention by 80.9% аnd 54.9% on use behаviour.

Abstract: Escherichia coli are remarkably versatile microorganisms and important members of the normal intestinal microbiota of humans and animals. This harmless commensal organism can acquire a mixture of comprehensive mobile genetic elements that contain genes encoding viru-lence factors, becoming an emerging human pathogen capable of causing a broad spectrum of intestinal and extraintestinal diseases. Nine definite enteric E. coli pathotypes have been well characterized, causing diseases ranging from various gastrointestinal disorders to urinary tract infections. These pathotypes employ many virulence factors and effectors subverting the func-tions of host cells to mediate its virulence and pathogenesis. This review summarizes new de-velopments in our understanding of diverse virulence factors associated encoding genes used by different pathotypes of enteric pathogenic E. coli to cause intestinal and extraintestinal diseases in humans.

The devastating COVID-19 pandemic forced academia to go virtual. Educational institutions around the world have stressed online learning programs in the aftermath of the pandemic. However, because of insufficient access to ICT, a substantial number of students failed to harness the opportunity of online learning. This study explores the latent digital divide exhibited during the COVID-19 pandemic while online learning activities are emphasized among Bangladeshi students. It also explores the digital divide exposure and the significant underlying drivers of the divide. A cross-sectional survey was employed to collect quantitative data mixed with open-ended questions to collect qualitative information from the student community. The findings revealed that despite the majority of students have physical access to ICT but only 32.5% of students could attend online classes seamlessly, 34.1% of the students reported the data prices as the critical barrier, and 39.8% of students identified the poor network infrastructure is the significant barrier for them to participate in online learning activities. This paper aimed to explore the underlying issues of the digital divide among Bangladeshi students to assist relevant stakeholders (e.g., the Bangladesh government, Educational Institutions, Researchers) in providing the necessary insights to arrange for students to undertake online learning activities successfully.

Candida albicans as an opportunistic pathogen exploits the host immune system and causes a variety of life-threatening infections. The polymorphic nature of this fungus gives it tremendous advantage to breach mucosal barriers and cause a variety of oral and disseminated infections. Enterococcus faecalis, another opportunistic pathogen co-exists with C. albicans in several niches in the human body, including the oral cavity and gastrointestinal tract. However, interactions between E. faecalis and C. albicans on oral mucosal surfaces remain unknown. Here, for the first time, we comprehensively characterized the interactive profiles between laboratory and clinical isolates of C. albicans (SC5314 and BF1) and E. faecalis (OG1RF and 846) on an organotypic oral mucosal model. Our results demonstrated that the two species formed robust biofilms on the mucosal tissue surface with profound surface erosion and fungal invasion. Specifically, this effect was more pronounced in the laboratory isolates than in the clinical isolates. Notably, several genes of C. albicans involved in tissue adhesion, hyphal formation, fungal invasion, and biofilm formation were significantly upregulated in the presence of E. faecalis. This study highlights the strain-dependent cross-kingdom interactions between E. faecalis and C. albicans on oral mucosa, demonstrating the requisite to study more substrate-dependent polymicrobial interactions.

Marketing is one of the important stages, the decisive factor affecting the success of production and business activities of every business. Therefore, marketing is considered to be the first and most important stage in the process of introducing, bringing products to market and branding of businesses, especially in the period when the disease situation is taking place very complicated worldwide. This study provides both qualitative and quantitative results for the following research objectives. Firstly, the study will assess the situation and analyze the appropriateness of marketing models in the current market situation trend. Secondly, the study proposes an approach in building a new type of marketing model, which is 3D web-based marketing applied in e-commerce to support the modeling of enterprise products in the form of Interactive 3D products are similar to real products. Thirdly, testing and evaluating 3D e-commerce web marketing model at Truong Hai Auto Showroom, Thai Nguyen City branch. This study also proposes a number of solutions for the research and deployment of 3D web marketing model application for businesses in the current market situation.