Implant-supported-screw-retained prostheses are really popular. Some of the most frequent complications have been mechanical complications. These include abutment screw loosening or even screw fracture. Using an intermediate abutment can offer several advantages. However, little literature has been found regarding how this affects the mechanical behavior of dental restorations. This study focuses on understanding the mechanical behavior of implant-supported restorations with a transepithelial component compared to those with a direct implant-supported restoration. It was carried out by using the Finite Element Method (FEM) and was experi-mentally validated. The results showed that in the case of transepithelial-supported restoration, the prosthetic screw mounted over the transepithelial component suffers higher stress than the one screwed directly to the implant. After applying a cyclic fatigue load, it is experimentally proven that, in the transepithelial-supported restorations, the fuse changes from being the screw that goes to the implant, to being the upper one. As a conclusion we can say that the use of an intermediate abutment in dental restoration not only provides better protection to the rest of the dental restoration but also allows easier repair in the event of a fracture. This can potentially lead to more efficient procedures and improved patient outcomes.

As the increase threat of flood risk and environmental safety due to the urbanization, Sponge city research has been attracting extensive attention both in practical and theoretical research field. To date, there are only scattered studies about Sponge city. Moreover, vary names of Sponge city prevalent in different countries, which leads to disconnection of literature in the same field of Sponge city. In this paper, a thorough systematic literature mining of Sponge city is presented. A literature analysis system is created, which includes literature export from Web of Sciences and systematic analysis via NoteExpress and CiteSpace. Some literature statistical results are derived. Challenges and opportunities for future research are anticipated. Our goals are to promote this promising thought, summarize past research, and identify issues for future research to create impacts on the practice of Sponge city.

Good eyesight belongs to the most-valued attributes of health, and diseases of the eye are a significant health care burden. Case numbers are expected to further increase in the next decades due to an aging society. The development of drugs in ophthalmology, however, is difficult due to limited accessibility of the eye, in terms of drug administration and in terms of sampling of tissues for drug pharmacokinetics (PK) and pharmacodynamics (PD). Ocular quantitative systems pharmacology (QSP) models provide the opportunity to describe the distribution of drugs in the eye as well as the resulting drug-response in specific segments of the eye. In particular, ocular physiologically-based pharmacokinetic (PBPK) models are necessary to describe drug concentration levels in different regions of the eye. Further, ocular effect models employing molecular data from specific cellular systems are needed to develop dose-response correlations. We here describe the current status of PK/PBPK as well as PD models for the eye and describe cellular systems, data repositories as well as animal models in ophthalmology. The application of the various concepts is highlighted for the development of new treatments for post-operative fibrosis after glaucoma surgery.

Aim: Reporting 3 year outcomes of a community shared care scheme run by specialised independent prescribing (IP) optometrists for stable glaucoma and ocular hypertension (OHT) patients in West Kent, England. Purpose: Shared Care Schemes for glaucoma exist to alleviate the burden on Hospital Eye Services (HES) glaucoma clinics. We studied the effectiveness of community care by highly trained and qualified IP optometrists in terms of disease stability and referral rate into HES.Methods: Retrospective longitudinal review of 200 eyes with stable early to moderate stage glaucoma and OHT followed-up in two specialist optometry practices. Outcome measures included visual field mean deviation (VFMD), intraocular pressure (IOP), changes to treatment and referral rate into HES. Inclusion criteria included all patients with OHT and glaucoma (open angle and primary angle closure) referred for community follow-up. Incomplete data sets were excluded.Results: Mean age 71yrs (range 28 - 93yrs) and equal male: female ratio. n= 159 at year 3. The results for both outcomes showed no significant change from baseline at 12 or 24-month time points. However, a significant change from baseline at 36 months was observed for both outcomes: mean reduction of 0.7 mmHg in IOP, and a mean reduction of 0.3 dB in VFMD. There was a statistically significant change in the number of drops used at 36 months (p=0.001). 11 patients had a change in medication within 3 years. One patient was referred back to HES for uncontrolled IOP and consideration of trabeculectomy.Conclusion: Community follow-up of stable cases of glaucoma and OHT by highly qualified IP optometrists was safe, with stability of disease maintained and few referrals back to HES.

Primary congenital glaucoma (PCG) is a heterogeneous, inherited, and severe optical neuropathy caused by apoptotic degeneration of the retinal ganglion cell layer. Whole-exome sequencing analysis of one PCG family identified two affected siblings who carried a low-frequency homozygous nonsense GUCA1C variant (c.52G>T/p.Glu18Ter/rs143174402). This gene encodes GCAP3, a member of the guanylate cyclase activating protein family, involved in phototransduction and with a potential role in intraocular pressure regulation. Segregation analysis supported the notion that the variant was coinherited with the disease in an autosomal recessive fashion. GCAP3 was detected immunohistochemically in the adult human ocular ciliary epithelium and retina. To evaluate the ocular effect of GUCA1C loss-of-function, a guca1c knockout zebrafish line was generated by CRISPR/Cas9 genome editing. Immunohistochemistry demonstrated the presence of GCAP3 in the non-pigmented ciliary epithelium and retina of adult wild-type fishes. Knockout animals presented up-regulation of the glial fibrillary acidic protein in Müller cells and evidence of retinal ganglion cell apoptosis, indicating the existence of gliosis and glaucoma-like retinal damage. In summary, our data provide evidence for the role of GUCA1C as a candidate gene in PCG and offer new insights into the function of this gene in the ocular anterior segment and the retina.

This study describes the AMD impacted environments and critically discusses the effects of AMD, current prediction and prevention methods and treatment technologies. The study further, crit-ically analyses the case studies, gaps in AMD research and the challenges and opportunities of-fered by AMD. The study outlined future technological intervention aiming at a paradigm shift towards reducing the volume of sludge generated as well as the operating cost and improving AMD treatment efficiency. The integrated AMD treatment technologies that result in a holistic approach toward sustainable AMD treatment are a current need. As a result, a sustainable AMD treatment strategy has been made possible due to water reuse and rich resource recoveries such sulphuric acid, rare earth elements, and metals. The cost of AMD treatment can be decreased with the use of recovered water and resources, which is essential for developing a sustainable AMD treatment process.

(1) Background: Breast cancer-associated lymphedema (BCRL) is a major complication of breast cancer treatment, affects the quality of life of breast cancer survivors who develop it. Manual lymphatic drainage has a beneficial result in combating lymphedema in patients who have undergone breast cancer surgery. The hypothesis consists in complete decongestive therapy reduces the lymphedema at the level of the upper limb on the side of mastectomy. (2) Methods: Twenty-five patients with radical mastectomy and upper limb lymphedema on the mastectomy side were included in this study. Upper limb circumferences were measured with a tape measure at the following levels: metacarpophalangeal joint; distal radioulnar joint; 10 cm distal to lateral epicondyle; 5 cm proximal to elbow joint; 10 cm proximal to lateral epicondyle. (3) Results: Patients received twice weekly manual lymphatic drainage, multi-layer compression bandaging and upper limb muscle stimulation exercises on the mastectomy side twice weekly. The circumference assessed at the level of the metacarpophalangeal joints and distal radio-carpal joint decreased at the final evaluation. Forearm perimetery - 5 and 10 cm distal to the lateral epicondyle the circumference decreased at the final assessment. (4) Conclusions: Patients with breast cancer-related lymphedema should receive comprehensive decongestive therapy in the early stage of lymphedema to achieve rapid clinical results and improved quality of life

Drainage systems are usually dimensioned for design storms based on intensity-duration-frequency (IDF) curves of extreme precipitation. For each location, different IDF curves are established based on local hydrological conditions. Recent research shows that these curves also vary with time, and should be updated with recent data. The purpose of this study is to evaluate IDF curves obtained from precipitation simulations from the Eta RCM, comparing them with IDF curves obtained from data of a rainfall station. Climate models can be a useful tool for assessing the impacts of climate changes on drainage systems, referring precipitation forecasts. In this study, the Eta RCM was forced by two global climate models: HadGEM2-ES and MIROC5. The bias of the precipitation data, generated by RCM models, was corrected using a Gamma distribution. The Juqueriquerê River Basin, in the cities of Caraguatatuba and São Sebastião, São Paulo State, Brazil, was chosen as a case study. The results show a good correlation between the IDF curves of simulated and observed rainfall for the control period (1960-2005), indicating the strong possibility of using the Eta RCM precipitation forecasts for 2007 - 2099 to establish future IDFs thereby, taking into account climate changes in urban drainage design.

Background: In most cases, intra-labyrinthine schwannoma (ILS) occurs in patients with unilateral hearing deterioration or neurofibromatosis type II (NF II). The pattern of localization of these tumors is various but affects mostly the cochlea. Extirpation of the ILS, if hidden by the cochlea modiolus, is difficult under the aspect of complete removal. Therefore, a tissue removal device (TRD) was designed and tested in temporal bones. The principle of handling the new device is a pushing and pipe cleaner handling inside the cochlea. This present study aimed to describe the first in vivo experience with the newly developed TRD for removing cochlear intra-labyrinthine schwannoma. Methods: In three patients, the TRD was used for the tumor removal of ILS. In two patients with a cochlear schwannoma in combination with a cochlea implantation and one patient suffering from NF II, a cochlear schwannoma was removed with the TRD. The access was performed with a posterior tympanotomy, an enlarged round window approach, and an additional second-turn access. The device was inserted and extracted gradually from the second turn access until the rings were visible in the second turn access. By pushing and pipe cleaner handling, the tumors were removed. An MRI control was performed on the day postoperatively with a T1 GAD sequence. Results: Tumor removal with the TRD was performed in a 15-minute procedure. MRI control confirmed a complete removal on the postoperative day in both cases. Conclusion: In vivo handling of the device confirmed a straightforward handling for tumor removal. MRI scanning showed a complete removal of the tumor by the TRD.

Among hearing aid (HA) users, there is a considerable variability in word-recognition scores (WRS). This variability is most pronounced among individuals with moderately severe to severe hearing loss. The variability cannot be adequately explained by factors such as the pure-tone audiogram, audiogram type, or age. This prospective study was designed to investigate the relationship between tone decay (TD) and WRS in a group of HA users with corresponding pure-tone hearing loss. The study population included 22 patients with hearing loss between 50 and 80 dB HL. Aided WRS, unaided WRS and TD were assessed for both ears. TD was found to be frequency-dependent. TD and WRS were correlated, with up to R=–0.66. The TD test was revealed as a feasible method for explaining the variability in WRS among HA users with hearing loss below 80 dB. This may contribute to improved differential diagnostics. The TD test may thus offer a better understanding of the limitations of HA use in the context of cochlear implant candidacy assessment for HA users.

Glaucoma is a group of ocular diseases that causes irreversible blindness worldwide and is characterized by a multifactorial degeneration of optic nerve and retinal ganglion cells (RGCs), leading to vision loss. One of the significant risk factors in glaucoma pathogenesis is glia-driven neuroinflammation. Impairment of mitochondrial dynamics and bioenergetics is associated with glaucomatous neurodegeneration and is linked to neuroinflammation. Apolipoprotein A-I binding protein (AIBP) binds to toll-like receptor 4 (TLR4) and facilitates the removal of excess cholesterol from the plasma membrane in activated cells, suggesting the regulation of cholesterol-driven inflammation by inhibiting the TLR4-associated lipid rafts. AIBP is localized in mitochondria and regulates mitophagy by ubiquitination of mitofusin 1 and 2. We observed elevated intraocular pressure-induced AIBP deficiency in glaucomatous neurodegeneration. We also observed that AIBP deficiency activated TLR4 in Müller glia, triggered mitochondrial dysfunction in both RGCs and Müller glia and impaired visual function. In mouse models of glaucoma, AIBP treatment protects RGCs by reducing inflammatory responses. Here, our review focuses on investigating the role of AIBP in the retina and examining the underlying mechanism by which AIBP contributes to the pathogenesis of glaucoma, aiming to provide new insight into the therapeutic potential for the treatment of glaucoma.

This study aimed to compare the efficacies and safety of enhanced and standard monofocal intraocular lenses (IOLs) in eyes with early glaucoma. Patients with concurrent cataracts and open-angle glaucoma (OAG) were enrolled. They underwent cataract surgery with IOL implantation. Manifest refraction; monocular uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), uncorrected intermediate visual acuity (UIVA), and uncorrected near visual acuity (UNVA); visual field (VF); contrast sensitivity (CS); defocus curves and questionnaires were assessed three months postoperatively. Thirty-four and 38 patients had enhanced and standard monofocal IOLs, respectively. The enhanced monofocal IOL provided better UIVA than the standard monofocal IOL (p = 0.003) but similar UDVA, CDVA and UNVA. The enhanced monofocal IOL had more consistent defocus curves than the standard monofocal IOL, especially at -1 (p = 0.042) and -1.5 (p = 0.026) diopters. The enhanced monofocal IOL provided better satisfaction (p = 0.019) and lower spectacle dependence (p = 0.004) than the standard monofocal IOL for intermediate vision, with similar VF and CS. In conclusion, the enhanced monofocal IOL is recommended for patients with OAG because they provide better intermediate vision, higher satisfaction, and lower dependence on spectacles than standard monofocal IOL, without worsening other visual outcomes.

Using the OCT platform, we can generate high-resolution data on retinal nerve fiber layer (RNFL) thickness in a given eye at a large number of angular-points defined on a circular coordinate system. However, insightful characteristics of OCT RNFL data such as its circularity and granularity generally remain unutilized in its common downstream statistical analyses. We present a new circular statistical framework that defines an Angular Decay function and thereby provides a directional representation of an eye in terms of its focused RNFL loss. By applying to a clinical cohort of Asian Indian eyes, the generated circular data was modeled with a finite mixture of von Mises distributions, which led to unsupervised identification in different age-groups of 2 recurrent clusters of glaucomatous eyes with distinct directional signatures of RNFL decay. New indices of global and local RNFL loss were computed for comparing the structural differences between these glaucoma clusters across the age-groups.

Purpose is to o review the pathogenic mechanism for ocular hypertension and glaucoma development after pars plana vitrectomy. Both acute and chronic causes are considered and special attention is paid to the theories and clinical evidence on the risk of developing Open Angle Glaucoma (OAG) after Pars Plana Vitrectomy (PPV). Most existing scientific literature on the issue agree on the role of ascorbate as an oxygen scavenger within the vitreous chamber. Oxygen tension in the vitreous and anterior chamber is maximum inn proximity of the retinal surface and endothelium, respectively and steeply decreases toward the lens; on both sides, and trabeculate. Vitreous removal and, to a lesser extent, liquefaction, greatly reduces oxygen tension gradient in vitreous chamber while cataract extraction has similar effects on anterior chamber oxygen gradients. Oxygen derivatives originated from the cornea and retina are actively reduced by the vitreous gel and/or the crystalline lens. Vitreous removal and cataract extraction reduce drastically this function. Most reported clinical series confirm this hypothesis although protocol difference and follow-up length greatly impact the reliability of results.

Purpose: This study investigated the hypotensive effect of RKI-1447, a Rho kinase inhibitor, in a porcine ex vivo pigmentary glaucoma model. Methods: Twenty-eight porcine anterior chambers were perfused with medium supplemented with 1.67 × 10⁷ pigment particles/mL for 48 hours before treatment with RKI-1447 (n = 16) or vehicle control (n = 12). Intraocular pressure (IOP) was recorded and outflow facility was calculated. Primary trabecular meshwork cells were exposed to RKI-1447 or vehicle control; effects on the cytoskeleton, motility, and phagocytosis were evaluated. Result: Compared to baseline, the perfusion of pigment caused a significant increase in IOP in the RKI-1447 group (P = 0.003) at 48 hours. Subsequent treatment with RKI-1447 significantly reduced IOP from 20.14 ± 2.59 mmHg to 13.38 ± 0.91 mmHg (P = 0.02). Pigment perfusion reduced the outflow facility from 0.27 ± 0.03 at baseline to 0.18 ± 0.02 at 48 hours (P < 0.001). This was partially reversed with RKI-1447. RKI-1447 caused no apparent histological changes in the micro- or macroscopic TM appearance. RKI-1447-treated primary TM cells showed significant disruption of the actin cytoskeleton both in the presence and absence of pigment (P < 0.001) but no effect on TM migration was observed. Pigment-treated TM cells exhibited a reduction in TM phagocytosis, which RKI-1447 reversed. Conclusion: RKI-1447 significantly reduces IOP by disrupting TM stress fibers and increasing TM phagocytosis. These features may make it useful for the treatment of secondary glaucomas with an increased phagocytic load.

Purpose: To compare the therapeutic efficacy and safety of dorzolamide/timolol fixed-combination in newly diagnosed primary open angle glaucoma patients. Methods: In this prospective, interventional case series, newly diagnosed primary open angle glaucoma (POAG) patients that had not been treated for glaucoma were included. Patients were started on Cosopt twice a day (BID) for 1 month and then switched to three times a day (TDS) for additional 1 month. Patients underwent comprehensive ophthalmic examination, diurnal intraocular pressure (IOP), blood pressure (BP) and 24-hours heart rate (HR) measurements at baseline, month 1( BID), and month 2( TDS). IOP, systolic and diastolic pressures were measured at 8:00 AM,12:00 AM, 4:00 PM, 8:00 PM and 12:00 PM. Throughout the study, all adverse events were recorded and monitored by the investigators. Results: In 31 POAG patients that completed the study ,mean baseline IOP was 23.1±3.15 mmHg . IOP was decreased significantly 16.5 ± 2.21 at 1 month (P < 0.0001) and 13.9 ± 2.23 mmHg at 1 and 2 month follow up. (P < 0.0001) IOP was significantly lower in month 2 compared to month 1 (P = 0.0004). While Cosopt BID significantly reduced the mean 24-hour systolic BP and mean 24-hour HR from baseline (P < 0.0001), the mean 24-hour systolic BP and HR remained unchanged 2ith Cosopt TDS compared to BID (P = 0.62). Conclusions: Cosopt TDS has a superior IOP-lowering effect than Cosopt BID in POAG patients with comparable safety profile.

In the last decades, the impacts of urbanization on the hydrological cycle have led to an increase in the frequency and magnitude of urban flooding events, also amplified by the effects of climate change. Sustainable Drainage Systems (SuDS) provide a revolutionary change in this field, improving the sustainability and resilience of cities. This research explores the integration of different SuDS with the aim of significantly reducing both flow volume and celerity of floods in a residual urban catchment area of metropolitan city of Querétaro (Mèxico), where extreme rainfall frequently occurs. This catchment is a representative suburb of urban pressure and environmental degradation problems. Currently, managing storm water under climate uncertainty through a multi-disciplinary approach is a major concern in this urban area. A 1D-2D coupling model of shallow water equations, finite volume method, unstructured meshing method, and hybrid parallel computing application defined the optimal configuration of SuDS at catchment scale to reduce the flood vulnerability in Querétaro. Specifically, in this paper we explore the management issues of the proposed SuDS configuration that acts as a water resource system with multiple purposes. A generic simulation model called MODSIM was applied to simulate the designed urban drainage system under a balanced IPCC future climate scenario in terms of reliability, resilience and vulnerability against water scarcity.

As the structure of horizontal gas wells is more complicated than that of vertical wells, the form of the liquid-carrying in different sections does not well agree. This makes it problematic to apply the widely used liquid-carrying theory of vertical gas wells in horizontal gas wells. Since the theory focused on the critical gas flow rate, it cannot quantify how much liquid it can remove. Simultaneously, it ignores the fact that the liquid-carrying ability of gas flow is limited and the producing liquid has a certain amount of flowing energy. In this study, the gas-liquid flow law of horizontal gas wells and wellhead drainage stability in different tubing depths were firstly studied. Then, the stability of gas drainage for different tubing depths was analyzed and confirmed. Given the disadvantages of the typical theory of critical gas flow, the mathematical model of different tubing depths for gas drainage is established for horizontal gas wells. The innovative model could take the energy of gas flow and liquid flow into account, and quantify the liquid volume which was removed. By verifying the model with the experiments, the result showed that the relative error of the model is generally less than 10%. It shows the research could provide a scientific basis for the analysis and liquid-carrying capacity for horizontal gas wells.

Mining-induced water contamination remains a significant concern in many regions of the world due to the high concentrations of toxic ions often associated with it. In this study, cellulose-supported ferrihydrite composites (CNF-Fe) were prepared by seeding of ferrihydrite nanoparticles on cellulose nanofibres (CNFs) and employed for the removal of As(III), As(V) and Cr(VI) from contaminated water. The adsorbent was characterized by electron microscopy, gas adsorption, point of zero charge (pH_PZC), X-ray diffractometry (XRD), as well as infrared and Raman spectroscopy. Compared to parent CNFs, CNF-Fe adsorbents had lower crystallinity and a higher surface area: 218.76 m² g^-1. Further, with a pH_PZC of 6.3, CNF-Fe was positively charged at low pH and suitable for adsorption of anions at acidic conditions characteristic of acid mine drainage. In single-ions solutions, the removal efficiency of CNF-Fe was in the order Cr(VI)>As(V)>As(III) (i.e. 0.15, 0.12 and 0.11 mg g^-1 respectively). Adsorption kinetics followed the pseudo second-order model and isotherms were best fitted by the Freundlich, Dubinin-Radushkevich, and Temkin models. However, when CNF-Fe was applied to AMD-contaminated water (pH 2.7), Cr(VI) uptake decreased to ~39% which was likely due to competition from sulphate and selenium ions. Nevertheless, the adsorbent displayed regeneration capabilities with ~98% As and ~45% Cr desorbed after 24 hours of treatment. Together, these results suggest that cellulose supported ferrihydrite composites can be applied in treatment of mine drainage-contaminated water in conjunction with pre-treatments that limit SO₄^2- and selenium concentrations.

Hypoglossal nerve stimulator (HGNS) is a minimally invasive device used for treating obstructive sleep apnea (OSA). The conventional implantable HGNS is a device that consists of a stimuli generator, a breathing sensor, and electrodes connected to the hypoglossal nerve via leads. However, this implant is bulky and causes significant trauma. In this paper, we propose a minimally invasive HGNS based on an electrocardiogram (ECG) sensor and a wireless power transfer (WPT), consisting of a wearable breathing monitor and an implantable stimulator. The breathing external monitor utilizes an ECG sensor to identify abnormal breathing patterns associated with OSA with 88.68$\%$ accuracy, achieved through the utilization of a Convolutional Neural Network (CNN) algorithm. With a skin thickness of 5mm and a receiving coil diameter of 9mm, the power conversion efficiency was measured at 31.8$\%$. The implantable device, on the other hand, is composed of a front-end CMOS Power Management Module (PMM), a Binary Phase Shift Keying (BPSK)-based data demodulator, and a bipolar biphasic current stimuli generator. The PMM, with a silicon area of 0.06 $mm^2$ (excluding pads), demonstrates a power conversion efficiency of 77.5$\%$ when operating at a receiving frequency of 2 MHz. Furthermore, it offers three-voltage options (1.2V, 1.8V, and 3.1V). Within the data receiver component, a low-power BPSK demodulator has been ingeniously incorporated, consuming only 42 $\mu$W when supplied with a voltage of 0.7V. The performance is achieved through the implementation of the self-biased phase-locked loop (PLL) technique. The stimuli generator delivers biphasic constant currents, providing a 5-bit programmable range spanning from 0 to 2.4 mA. The functionality of proposed ECG and WPT-based HGNS was validated, representing a highly promising solution for the effective management of OSA, all while minimizing trauma and space requirements.

Background: The target volume for post-mastectomy radiation therapy (PMRT) in breast cancer patients with reconstruction has been a subject of debate. This study aimed to assess the radiation dose distribution and treatment outcomes associated with different chest wall (CW) delineation according to ESTRO ACROP guideline for patients underwent implant-based reconstruction. Methods: We conducted a retrospective review of breast cancer patients who underwent mastectomy followed by two-stage implant-based breast reconstruction and adjuvant radiation therapy (RT) between 2007 and 2022. The expanders/implants were positioned retropectorally. The chest wall target volumes were categorized into two groups: the prepectoral group, which excluded the deep lymphatic plexus, and the whole expander group. Results: The study included 26 patients, 15 in prepectoral group and 11 in whole expander group. No significant differences were observed in normal organs exposure between the two groups. There was a trend toward a lower ipsilateral lung mean dose in the prepectoral group (10.2 vs. 11.1 Gy, p=0.06). Both groups exhibited limited instances of reconstruction failure and local recurrence. Conclusions: For patients undergoing two-stage expander-implant retropectoral breast reconstruction and PMRT, our data have provided comparable outcomes and normal organs exposure for those omitting the deep lymphatic plexus.

Irrigation and debridement using an irrigation solution is a fundamental step during the surgi-cal treatment of both acute and chronic periprosthetic joint infection (PJI). However, there is no consensus on the optimal solution, nor is there sufficient evidence on optimal irrigation time and combination of solutions. Therefore, it is necessary to determine which solution or combi-nation of solutions is most efficacious against biofilm, as well as the optimal irrigation time. We conducted an experimental in vitro model by inoculating stainless steel discs with ATCC strains of methicillin-susceptible Staphylococcus aureus, methicillin-resistant S. aureus, Pseudomonas aeru-ginosa, and a clinical strain of Staphylococcus epidermidis. The discs were all irrigated with com-monly used antiseptic solutions (10% and 3% povidone iodine, hydrogen peroxide, 3% acetic ac-id, and Bactisure™) for 1 min, 3 min, and 5 min and their combinations for 9 min (3 min each) vs. sterile saline as a positive control. We evaluated the reduction in biofilm based on colony form-ing unit (cfu) counts and, in combination assays, also based on cell viability and scanning elec-tron microscopy. All antiseptics alone reduced more than 90% of cfu counts after 1 min of irriga-tion; the worst results were for hydrogen peroxide and 3% acetic acid. When solutions were combined, the best results were observed for all those starting with acetic acid, in terms of both reduction of log cfu/ml counts and viable cells. We consider that a combination of antiseptic so-lutions, particularly that comprising the sequence acetic acid+povidone iodine+hydrogen per-oxide, would be the best option for chemical debridement during PJI surgery.

Background - Mandibular flexion (MF) is a complex biomechanical phenomenon, which involves a deformation of the mandible, due mainly to the contraction of the masticatory muscles, and can have numerous clinical effects. The main aim of the current systematic review is to highlight the different factors that can increase MF, to help clinicians, identify patients to whom they should pay more attention. As a secondary outcome, we wanted to analyze the preventive measures and suitable techniques to be adopted to minimize the negative effects of this phenomenon on oral fixed rehabilitations. Methods - The review, which was carried out in accordance with the “Preferred Reporting Items for Systematic reviews and Meta-Analyses” (PRISMA) flowchart, was recorded in the “International Prospective Register of Systematic Reviews” (PROSPERO). As research questions, “Patient/Population, Intervention, Comparison and Outcomes” (PICO) questions were employed. Using the ROBINS-I technique, the risk of bias in non-randomized clinical studies was evaluated. Results - The initial electronic search identified over 1300 potential articles, of which 54 studies were included in this systematic review. Information regarding the relationship between MF and individual factors, mandibular movements, impression-taking and fixed rehabilitations were obtained. Conclusions – The studies included in this systematic review showed that MF is greater during protrusive movements, in the posterior areas of the lower jaw, and in patients with brachial facial type, greater jaw length, small gonial angle and less density, length and bone surface of the symphysis. The biomechanical effects of mandibular flexion on fixed restorations are debated. Prospective clinical and radiological observational studies should be conducted to evaluate the potential short-, medium- and long-term consequences of MF.

Background and Objectives: Mechanical and biological complications can lead to system fracture or screw loss on dental implants. Narrow and regular platforms have been used without a consensus about the effect of distance the abutment from the prosthetic platform margin. The aim of this study is to evaluate different insertion torques in the deformation of tri-channel platform connections through two- and three-dimensional measurements with micro-CT. Materials and Methods: 164 implants were divided into groups (platform diameter and type): 3.5, 3.75, and 4.3 mm NP (Narrow Platform), and 4.3 mm RP (Regular Platform). Each implant-platform group was then divided into four subgroups (n = 10) with different torques: T45 (45 Ncm), T80 (80 Ncm), T120 (120 Ncm) and T150 (150 Ncm). The implant-abutment-screw assemblies were scanned and the images obtained were analyzed. Results: A significant difference was observed for the linear and volume measures between the different platforms (p &lt;0.01) and the different implant insertion torques (p &lt;0.01). Qualitative analysis suggested higher deformation resistance for the 3.75 NP compared to the 3.5 NP, and RP was more resistant compared to the NP. Conclusions: The 0.25-mm increment in the implant platform did not increase the resistance to the applied insertion torques; the 4.3-mm implant was significantly stronger compared to the 3.5-mm implant and the proposed micro-CT analysis was considered valid for both 2D and 3D analyses of micro gaps, qualitatively and quantitatively.

In recent years extensive studies have been continuously undertaken on the design of bioactive and biomimetic dental implant surfaces due to the need for improvement of the implant-bone interface properties. In this paper, the titanium dental implant surface was modified by a bioactive vitamin D3 coating prepared by self-assembly process. Surface characterization of the modified implant was performed by field emission scanning electron microscopy (FE-SEM), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), and contact angle measurements (CA). Implant’s electrochemical stability during exposure to an artificial saliva solution was monitored in situ by electrochemical impedance spectroscopy (EIS). Experimental results obtained were corroborated by means of quantum chemical calculations at the density functional theory level (DFT). The formation mechanism of the coating onto the titanium implant surface was proposed. During a prolonged immersion period, the bioactive vitamin D3 coating effectively prevented the underlying titanium from corrosive attack (polarization resistance in order of 10⁷ Ω cm²) with ~95% protection effectiveness.

Purpose: The aim of the present experimental 3D-finite element study was to evaluate the influence of an augmented sinus lift with an additional inserted bone graft block. The bone graft block stabilizes the implant in addition to conventional augmented bone. We placed the block in three different positions. The implants were loaded with axial force and forces secondary to laterotrusion and protrusion. Material and Methods: A simplified U-shaped 3D finite element model of the upper jaw and a more complex anatomical model of the left maxilla were created. The bone graft block was placed in three positions: in the lower third in contact with the sinus floor, the middle, and the upper third of the implant. Van Mises’ stress distribution was calculated and analyzed for the different models. We also compared the complex anatomical model with the simplified one. Results: The position of the bone graft block significantly influences the magnitude of stress distribution. A bone graft block positioned in the upper third or middle of the implant reduces the quantity of stress compared to the reference model without a bone graft block. The low bone graft block position is clearly associated with lower stress distribution in compact bone. We registered no significant differences in stress in compact bone with regard to laterotrusion or protrusion. Conclusions: Maximum values of von Mises stresses in compact bone can be reduced significantly by using a bone graft block. The reduction of stress is nearly the same for positions in the upper third and the middle of the implant. It is much more pronounced when the bone graft block is in the lower third of the implant near the sinus floor, which appeared to be the best position in the present study.

Teaching, learning, research, and development are all supported in a favorable atmosphere at the University of Lagos (UNILAG). The wetland systems made up of freshwater that are extremely biodiverse makeup about 10% of the total land area. Flooding, deforestation, excessive sedimentation, blockages to streams, abuse, overuse, and invasion of wetlands are some of the recent environmental challenges that the university faced. Urban heat island impacts, contaminants in the air, wetland degradation, social issues including stress, and a detachment from nature are all major concerns. With the green corridor behind the faculties of law and management science serving as a model supported by sustainability as a true foundation for UNILAG's campus landscapes, this article investigates the sustainable restoration of wetlands within the boundaries of the university. The use of qualitative techniques was employed, utilizing the Strengths-Weaknesses-Opportunities-Threats (SWOT) analysis. Additionally, a geospatial mapping of the wetlands and tributaries that connect the Lagos Lagoon was conducted to evaluate the intrinsic ecological goods and services through a series of analytical steps, beginning with an analysis of the land area, current biodiversity, hydrology, and its potential through landscape mapping and analysis. The biophysical setup, landscape features, climatic data analysis, the ecological goods and services derived from the wetlands, and the records of flooding and rainfall are all included in the geospatial evaluation and analysis. The educational institution's site planning for the remediation of its wetlands takes into account the actual evolution of the area's drainage network. Throughout the wetlands, low carbon emissions are generated by off-road bike lanes, trails for walking, and raised hardwood platforms. Combining native plant species and park furniture, the academic landscape atmosphere will be improved in each of the wetlands and aesthetic values. the country's "University of First Choice" and its biophysically restored wetlands will help illuminate the landscape while the green corridors have an innate ability to attract human affinity within the academic community. All of these elements are implemented following an environmentally friendly landscape planning, management, design model, and enforcement process.

In regions with limited precipitation information like Peru, many studies rely on precipitation data derived from satellite products (SPPs) and reanalysis products. These products provide near-real-time information and offer global spatial coverage, making them attractive for various applications. However, it is essential to consider their uncertainties when conducting hydrological simulations, especially in a key region like the Pacific drainage (Pd), where 56% of Peruvian population resides (including the capital Lima). This study evaluates the performance of three precipitation products: Reanalysis, ERA5-Land (top down approach), and two SPPs: GPM+SM2RAIN and SM2RAIN-ASCAT (bottom-up approaches). Hydrological modeling was conducted on 30 basins distributed across the Pd, which were grouped into five regions (I-V, ordered from south to north). The results showed that SM2RAIN-ASCAT performed well in regions I-III-IV, ERA5-Land in region II, and GPM+SM2RAIN in region V. The hydrological model GR4J was tested, and better efficiency criteria were obtained with SM2RAIN-ASCAT and GPM+SM2RAIN when comparing simulated versus observed streamflows. The hydrological modeling with SM2RAIN-ASCAT and GPM+SM2RAIN demonstrated satisfactory efficiency metrics (KGE > 0.75; NSE > 0.65). Additionally, ten hydrological signatures were quantified to assess the variability of simulated streamflows in each basin, with metrics such as Mean Flow (Q mean), 5th Quantile Flow (Q5), and 95th Quantile Flow (Q95) showing overall better performance. Finally, the results of this study demonstrate the reliability of using bottom-up satellite products in Pd basins.

In several Indonesian tropical cities, such as Makassar City, frequent flooding during the peak rainy season poses a significant challenge. This study seeks to address this issue by devising effective policies to reduce flood exposure. The main obstacle lies in accurately determining the flood inundation area. To overcome this, the study utilizes multiple satellite data sources on a cloud platform, integrating them with land use data, and DEM data, aligning these with the local government's urban land use plan and existing drainage networks. The research aims to quantify the affected area, identify the predominant inundated land cover, and assess the efficiency of Makassar's drainage system and urban land use plan. The study reveals that an uncoordinated drainage system in the Tamalanrea, Biringkanaya, and Mangala sub-districts results in severe flooding, encompassing a total area of 35.28 km². The most affected land use type is cultivation, constituting approximately 43.5% of the flooded area. Furthermore, 82.26% of the urban land use plan, covering 29.02 km², is submerged. It is imperative for the local government and stakeholders to prioritize the enhancement of drainage systems and urban land use plans, particularly in low-lying and densely populated regions

Green Infrastructure promotes the use of natural functions and processes as potential solutions to reduce negative effects derived from anthropocentric interventions such as urbanization. In cities of Latin America, for example, the need for more nature-sound infrastructure is evident due to its degree of urbanization and degradation of ecosystems, as well as the alteration of the local water cycle. In this study, an experimental approach for implementation of a prototype is presented. The experiment took place in a highly urbanized watershed located in the Metropolitan Area of Costa Rica. Initially, understanding the characteristics of the study area at different scales was achieved by applying the Urban Water System Transition Framework to identify the existing level of development of the urban water infrastructure, and potential future stages. Subsequently, preferences related to spatial locations and technologies were identified from different local decision-makers. Those insights were adopted to identify a potential area for implementation of the prototype. The experiment consisted on an adaptation of the local sewer to act as a temporal reservoir to reduce the effects derived from rapid generation of stormwater runoff. Unexpected events, not considered initially in the design, are reported in this study as a means to identify necessary adaptations of the methodology. Our study shows from an experimental learning-experience that the relation between different actors advocating for such technologies influences the implementation and operation of non-conventional technologies. Furthermore, the perception of security associated to green spaces was found as a key driver to increase the willingness of residents to modify their urban environments. In consequence, those aspects should be carefully considered as factors of designs of engineering elements when they are related to complex socio-ecological urban systems.

In areas where conventional fundus cameras are logistically unaffordable, the smartphone-based approach is considered as a promising future of glaucoma screening due to their affordability and ease-of-use. Optic disc localization is a critical stage during glaucoma screenings. For fundus images captured with standard fundus cameras, the majority of the models available out there can locate the optic disc with satisfactory performance. However, for images that are captured with smartphone-based fundus cameras, the inherent noise and lower quality of the fundus image makes it difficult for models to detect the optic disc region. In this study, we have proposed to utilize YOLOv8n for optic disc localization due to the model’s cutting-edge performance in diverse tasks and its lightweight nature. We have used a public dataset which has 2000 low quality fundus images that are captured using a smartphone-based fundoscopy device. From these, 60% of the data was used for fine-tuning the model, and 25% for testing. By using a confidence of 50% set as threshold, the model was able to detect the optic disc successfully on over 97% of test images with intersection over union of above 0.85. These results highlight the potential of the lightweight YOLOv8n model for deployment on resource-constrained environments, offering a promising performance on accurately localizing the OD and enhancing the feasibility of affordable glaucoma screening on smartphones.

Purpose The objective of this study was to eliminate any ambiguity by examining the correlation between gut microbiota and both AMD and glaucoma. Methods Mendelian randomization studies were conducted utilizing the data sourced from the GWAS database for the gut microbiome, AMD, and glaucoma. SNP estimates were summarized through five MR methods. We utilized Cochran's Q statistic to evaluate the heterogeneity of the instrumental variables. Additionally, we employed a "leave-one-out" approach to verify the stability of our findings. Results IVW suggests that Eubacterium (oxidoreducens group) and Parabacteroides had a protective effect on AMD. Both weighted median and IVW suggests that Lachnospiraceae (NK4A136 group) and Ruminococcaceae (UCG009) had a protective effect on AMD. However, both weighted median and IVW suggests that Dorea had a risk effect on AMD. Similarly, The IVW of Eubacterium (ventriosum group) showed a risk effect on AMD. The weighted median of Eubacterium (nodatum group), Lachnospiraceae (NC2004 group), and Roseburia had a risk effect on glaucoma. IVW suggested that Ruminococcaceae (UCG004) had a risk effect on glaucoma. Reverse MR analysis found a causal link between Eubacterium (nodatum group) and glaucoma. No causal relationships were found between AMD or glaucoma and the other mentioned bacterial groups. No significant heterogeneity or evidence of horizontal pleiotropy was detected. Conclusions This study found that certain gut bacteria had protective effects on AMD, while others may be risk factors for AMD or glaucoma. Besides, reverse MR found that glaucoma led to increased abundance of certain gut bacteria. Further trials are needed to clarify the specific mechanisms involved.

OCTA is an imaging modality used in the assessment of the retinal vasculature. It operates on the principle of coherence tomography used in standard OCT with the addition of delineating the retinal vascular. This provides a modern non-invasive retinal vascular imaging method compared to conventional dye-based imaging. High quality depth resolution of the superficial and deep capillary networks is possible on OCTA whereas this was not possible prior. OCTA may be limited by image quality degradation from factors such as motion artefact or media opacities, and therefore may not be the investigation of choice for all patient groups. There are multiple potential clinical applications for OCTA in retinal and choroidal vascular disease. Ongoing research is necessary to substantiate the more widespread use of OCTA due to its significant cost burden compared to current modalities.

In the last few decades, glaucoma became the second biggest leading cause of irreversible vision loss. Because of its asymptotic growth, it is not properly diagnosed until the relatively late stage. To stop the severe damage by glaucoma it is needed to detect glaucoma in its early stages. Surprisingly diabetes also be the greatest cause of glaucoma. In the modern era, artificial intelligence makes great progress in the medical image processing field. Image analysis based on machine learning gives a huge success in diagnosis glaucoma without any misdiagnosis. The aim of this proposed paper is to create an automated process that can detect glaucoma and diabetic retinopathy. Here various Machine Learning models are used and results of these methods are presented.

Purpose: To analyze the five-year results of Trabectome ab interno trabeculectomy of a single glaucoma center. Method: In this retrospective interventional single-center case series, data of 93 patients undergoing ab interno trabeculotomy between September 2010, and December 2012 were included. Kaplan-Meier analysis was performed using success criteria defined as postoperative intraocular pressure (IOP) ≤21 mm Hg, or >20% reduction from preoperative IOP, and no need for further glaucoma surgery. Risk factors for failure were identified using Cox proportional hazards ratio (HR). Results: The retention rate for five years follow-up was 66%. The cumulative probability of success at 1, 2, 3, 4 and 5 years was 82.6%, 76.7%, 73.9%, 72.3%, and 67.5%. Risk factors for failure were lower baseline IOP (HR=0.27, P=0.001), younger age (HR=0.25, P=0.02), and higher central corneal thickness (HR=0.18, P= 0.01). Pseudoexfoliation was associated with a higher success rate (HR= 0.39, P=0.02). IOP was decreased significantly from 20.0±5.6 mmHg at baseline to 15.6±4.6 mmHg at 5-year follow-up (P=0.001). The baseline number of glaucoma medications was 1.8±1.2, which decreased to 1.0±1.2 medications at 5 years. Conclusion: Trabectome surgery was associated with a good long-term efficacy and safety profile in this single-center case series with a high retention rate. A higher baseline IOP, older age, thinner cornea, and pseudoexfoliation glaucoma were associated with a higher success rate.

Enophthalmos is a severe complication of primary reconstruction following orbital floor frac-tures, oncological resections or maxillo-facial syndromes. The goal of secondary reconstruction is to re-store symmetrical globe positions to recover function and aesthetics. In this article we pre-sent a method of computer-assisted orbital floor reconstruction using a mirroring technique and a customized titanium or high-density polyethylene mesh, printed using computer aided manufac-turing techniques. This reconstructive protocol involves 4 steps: mirroring of the healthy orbit at the affected site, vir-tual design of a patient specific orbital floor mesh, computer-assisted manufacturing (CAD) of the implant, and surgical insertion of the device. Using a computed tomography data set, the un-injured side of the craniofacial skeleton was reflected onto the contralateral injured side, and a reconstructive orbital floor prosthesis was virtually designed on the mirrored orbital bone sur-face. The solid-to-layer (.STL) files of the prosthesis were then manufactured using Direct Metal Laser Sintering (DMLS) or Computer Numerical Control (CNC) methods, leading to the produc-tion of 10 titanium meshes and 2 high density polyethylene (HDPE) implants. Clinical outcomes were assessed using 3dMD photogrammetry and computed tomography measures in 14 treated patients. The technique described here appears to be a viable method to correct complex orbital floor de-fects needing delayed reconstruction. This article represents the prosecution of a previous study, which is part of a wider experimental protocol for orbital floor reconstruction using comput-er-assisted design-computer-assisted manufacturing (CAD-CAM) technology

This review article deals with the design of bioactive calcium phosphate coatings deposited on metallic substrates to produce bone implants. The bioceramic coating properties are used to create a strong bonding between the bone implants and the surrounding bone tissue. They provide a fast response after implantation and increase the lifespan of the implant in the body environment. The first part of the article describes the different compounds belonging to the calcium phosphate family and their main properties for applications in biomaterials science. The calcium to phosphorus atomic ratio (Ca/P)at. and the solubility (Ks) of these compounds define their behavior in a physiological environment. Hydroxyapatite is the gold standard among calcium phosphate materials, but other chemical compositions/stoichiometries have also been studied for their interesting properties. The second part reviews the most usual deposition processes to produce bioactive calcium phosphate coatings for bone implant applications. Plasma spraying is the main industrial process, but magnetron sputtering, pulsed laser deposition, electrospray deposition, electrophoretic deposition, and electrodeposition are also widely studied in academic and industrial research. The last part describes the main physicochemical properties of calcium phosphate coatings and their impact on the bioactivity of bone implants in a physiological environment.

Fatigue analysis plays a vital role in determining the structural integrity and life of a dental implant. With the use of such implants on the rise, there is a corresponding increase in the number of implant failures. As such, the aim of this research paper is to investigate the life of 3D-printed dental implants. The dental implants considered in this study were 3D printed according to the direct metal laser sintering (DMLS) method. Additionally, a finite element model was developed to study their performance, while fatigue life was predicted using Fe-Safe software®. The model was validated experimentally by performing fatigue tests. The life of the dental implants was analysed based on Normal strain and the Brown-Miller with Morrow mean correction factor algorithm. The model revealed that there was a strong correlation between the FEA and the experimental results. The clinical success of 3D-printed dental implant experimentally is 20.51 years and computationally under Normal strain is 19.89 years and Brown-Miller with Morrow mean correction factor is 26.82 years.

This article addresses the challenge of simulating rainstorm waterlogging in urban-scale areas where reliable drainage pipe network data is often lacking. Despite existing methods attempting to tackle this issue, there remains a gap in effectiveness. We present a novel approach, the Modified Equivalent Infiltration (MEI) method, building upon the foundation of the Equivalent Infiltration (EI) method. The study focuses on the outer ring area of Shanghai, utilizing data from the "In-Fa" typhoon period for simulation and comparison. Our findings reveal that the MEI method, requiring the same data inputs as the EI method, surpasses its predecessor in both principle and simulation results. Additionally, the MEI method demonstrates robustness in handling rainstorm waterlogging scenarios.

Agricultural drainage canals that connect upstream fish spawning areas to downstream rivers and lakes serve as crucial habitats for migrating fish. However, disconnections, such as drops and chutes, have been constructed in these canals due to agricultural modernization and flood control measures, hindering the movement of fish with limited swimming abilities. Portable fishways offer a promising solution to reconnect water bodies in agricultural canals, as they can be easily removed during high water discharges to avoid impeding the canals' drainage function. In addition to experimental assessments of fishway functionality, employing a hydrodynamic model to explore effective placement strategies for portable fishways is essential to maximize their effectiveness. This study presents a method to determine the best horizontal location of a portable fishway in an agricultural drainage canal using two-dimensional hydrodynamic simulations within the specified cases. The applicability of this method is demonstrated by addressing the positioning challenge of a portable fishway on a chute in an agricultural drainage canal in Japan. Results indicate that the proposed method allows for the selection of a suitable location, considering preferable hydraulic conditions both within the portable fishway and around its entrance.

Mine waste rock and drainage pose lasting environmental, social, and economic threats to the mining industry, regulatory agencies, and society as a whole. Mine drainage can be alkaline, neutral, moderately or extremely acidic and contains significant levels of sulfate, dissolved iron, and frequently a variety of heavy metals and metalloids, such as cadmium, lead, arsenic, and selenium. In acid neutralization by carbonate and silicate minerals, a range of secondary minerals can form and possibly scavenge these potentially harmful elements. Apart from the extensively-studied microbial-facilitated sulfide oxidation, the diverse microbial communities present in mine rock and drainage may also participate in the formation, dissolution, and transformation of secondary minerals influencing the mobilization of these metals and metalloids. This article reviews major microbial-mediated geochemical processes occurring in mine rock piles that affect drainage chemistry, with a focus on the role of microorganisms in the formation, dissolution and transformation of secondary minerals. Understanding this is crucial for developing biologically-based measures to deal with contaminant release at the source, i.e., source control.

Controlled drainage (CD) is an important agricultural measure for maintaining soil moisture and nutrients, controlling groundwater level, and increasing crop yield. In arid regions, CD can be used to improve the water supply in agriculture and reduce environmental pollution. In this study, we investigated the effect of CD, including a drainage depth of 40 cm (CWT1) and 70 cm (CWT2) during the plant growth period, free drainage (FD), and open ditch drainage (OD) on the migration of water, nutrients, and salts in the soil; the dynamics of groundwater level; the loss of soil nitrogen; and the growth of oilseed sunflower plants. Compared with FD, CD increased the water and nutrient content in the soil, reduced nitrogen loss, and enhanced the ability of the soil to continuously supply nitrogen to the oilseed sunflower plants, which benefited plant growth at later growth stages and reduced environmental pollution. During the period between irrigation at the budding stage and harvest stage, the average soil water content in the 0–20 cm soil layer in CWT1 increased by 3.67%, 4.78%, and 0.55%, respectively, compared with that in CWT2, FD, and OD. The soil mineral content in CWT1 was 25.17%, 35.05%, and 17.78% higher than that in CWT2, FD, and OD, respectively, indicating that higher soil salinity occurred at the later stage of plant growth in CWT1, which actually had little effect on the plants due to their enhanced salt tolerance and increased need for water and nutrients at that stage. In addition, CD delayed the decline in groundwater level, which allowed the plants to use groundwater at later growth stages, and as a result the yield and water use efficiency were improved. CWT1 significantly increased oilseed sunflower yield by 4.52–11.14% and increased water use efficiency by 1.16–10.8%. Moreover, CWT1 also increased the survival rate of the oilseed sunflower plants by 2.62–2.92%, and the plants demonstrated good growth. Therefore, under CD conditions, plants used soil water and nitrogen more efficiently and, as a result, their productivity was increased, and the water quality was improved.

The implementation of green roofs as sustainable urban drainage systems provides benefits for stormwater control and the environment and is always more encouraged. In this paper, the estimation of the probability of vegetation survival without irrigation has been proposed as a guide to choose the proper values for the design parameters; in particular the growing medium thickness has been related to the average return interval of the water content at the end of the dry period. Moreover the study represents an improvement of the analytical probabilistic approach since a chain of consecutive rainfall events has been considered, in order to take into account the possibility that the storage capacity is not completely available at the beginning of each event because of the pre-filling from more than one previous rainfall as typically happens for green roofs. Finally, developed equations have been validated by means of their application to two case studies, respectively in northern and southern Italy.

Glaucoma, a group of diseases characterized by progressive retinal ganglion cell loss, cupping of the optic disc and by a typical pattern of visual field defects, is a leading cause of severe visual impairment and blindness worldwide. Elevated intraocular pressure (IOP) is the leading risk factor for glaucoma development. However, glaucoma can also develop at normal pressure levels. An increased susceptibility of retinal ganglion cells to IOP, systemic vascular dysregulation, endothelial dysfunction and autoimmune imbalances have been suggested to play a role in the pathophysiology of normal tension glaucoma. Since inflammation and oxidative stress play a role in all forms of glaucoma, the goal of this review article is to resent an overview on the inflammatory and prooxidant mechanisms in the pathophysiology of glaucoma and to discuss immunomodulatory and antioxidant treatment approaches.

Glaucoma is a multifactorial neurodegenerative disease, characterized by degeneration of the retinal ganglion cells (RGCs). There has been little progress in developing efficient strategies for neuroprotection in glaucoma. We profiled the retina transcriptome of Lister Hooded rats at 2 weeks after optic nerve crush (ONC) and analyzed the data from the Genomic Fabric Paradigm (GFP) to bring additional insights into the molecular mechanisms of the retinal remodeling after induction of RGC degeneration. GFP considers for the expression of each gene 3 independent characteristics: level, variability and correlation with each other gene. Thus, the 17,657 quantified genes our study generated a total of 155,911,310 values to analyze. This represents 8,830x more data per condition than a traditional transcriptomic analysis. ONC led to a 57% reduction in RGC numbers as detected by retrograde labeling with DiI. We observed a higher Relative Expression Variability after ONC. Gene expression stability was used as a measure of transcription control and disclosed a robust reduction in the number of very stably expressed genes. Predicted Protein-Protein interaction (PPI) analysis with STRING revealed axon and neuron projection as mostly decreased processes, consistent with RGC degeneration. Conversely, immune response PPIs were found among up-regulated genes. Enrichment analysis showed that Complement Cascade and Notch Signaling Pathway, as well as Oxidative Stress and Kit Receptor Pathway were affected after ONC. To expand our studies of altered molecular pathways, we examined the pair-wise coordination of gene expressions within each pathway and within the entire transcriptome using Pearson correlations. ONC increased the number of synergistically coordinated pairs of genes and the number of similar profiles mainly in Complement Cascade and Notch Signaling Pathway. This deep bioinformatic study provides novel insights beyond the regulation of individual gene expression and discloses changes in the control of expression of Complement Cascade and Notch Signaling functional pathways that may be relevant for both RGC degeneration and remodeling of the retinal tissue after ONC.

Intravitreal injection is the gold standard therapeutic option for posterior segment pathologies, and long-lasting release is necessary to avoid reinjections. There is no effective intravitreal treatment for glaucoma or other optic neuropathies in daily practice, nor is there a non-invasive method to monitor drug levels in the vitreous. Here we show that a glaucoma treatment combining a hypotensive and neuroprotective intravitreal formulation (IF) of brimonidine-Laponite (BRI/LAP) can be monitored non-invasively using vitreous imaging captured with optical coherence tomography (OCT) over 24 weeks of follow-up. Qualitative and quantitative characterization was achieved by analysing the changes in vitreous (VIT) signal intensity, expressed as a ratio of retinal pigment epithelium (RPE) intensity. Vitreous hyperreflective aggregates mixed in the vitreous and tended to settle on the retinal surface. Relative intensity and aggregate size progressively decreased over 24 weeks in treated rat eyes as the BRI/LAP IF degraded. VIT/RPE relative intensity and total aggregate area correlated with brimonidine levels measured in the eye. The OCT-derived VIT/RPE relative intensity may be a useful and objective marker for non-invasive monitoring of BRI/LAP IF.

Glaucoma is a disease associated with retina of eye. Presently, millions of human being is suffering from this disease. Early detection of these diseases can save the people from blindness. Therefore, various methods have been developed for its detection. In this paper, we have studied the reported methods and summarized their performance in terms of accuracy of detection.

Purpose: To correlate outflow function and outflow tract vessel diameter changes induced by nitric oxide (NO). Methods: In a porcine anterior segment perfusion model, the effects of a nitric oxide donor (100 µM DETA-NO) on outflow facility were compared to controls (n=8 per group) with trabecular meshwork (TM) and after circumferential ab interno trabeculectomy (AIT). Outflow structures were assessed with spectral domain optical coherence tomography (SD-OCT) before and after NO, or an NO synthase inhibitor (100 µM L-NAME) and the vasoconstrictor, endothelin-1 (100 pg/mL ET-1). Scans were processed with a custom macro script and aligned for automated reslicing and quantification of cross-sectional outflow tract areas (CSA). Results: The facility increased after DETA-NO (0.189±0.081 μL/min·mmHg, p=0.034) and AIT (0.251±0.094 μL/min·mmHg, p=0.009), respectively. Even after AIT, DETA-NO increased the facility by 61.5% (0.190±0.074 μL/min·mmHg, p=0.023) and CSA by 13.9% (p<0.001). L-NAME + ET-1 decreased CSA by -8.6% (p<0.001). NO increased the diameter of focal constrictions 5.0±3.8 fold. Conclusions: NO can dilate vessels of the distal outflow tract and increase outflow facility in a TM-independent fashion. There are short, focally constricting vessel sections that display large diameter changes and may have a substantial impact on outflow.

Objective: To evaluate three different microincisional ab interno trabeculectomy procedures in a porcine eye perfusion model. Methods: In perfused porcine anterior segments, 90 degrees of trabecular meshwork (TM) were ablated using the Trabectome (T; n = 8), Goniotome (G; n = 8), or Kahook device (K; n = 8). After 24 hours, additional 90 degrees of TM were removed. Intraocular pressure (IOP) and outflow facility were measured at 5 µL/min and 10 µL/min perfusion to simulate an elevated IOP. Structure and function were assessed with canalograms and histology. Results: At 5 µL/min infusion rate, T resulted in a greater IOP reduction than G or K from baseline (76.12% decrease versus 48.19% and 47.96%, P = 0.013). IOP reduction between G and K was similar (P = 0.420). Removing another 90 degrees of TM caused an additional IOP reduction only in T and G but not in K. Similarly, T resulted in the largest increase in outflow facility at 5 µL/min compared with G and K (first ablation: 3.41 times increase versus 1.95 and 1.87; second ablation: 4.60 versus 2.50 and 1.74) with similar results at 10 µL/min (first ablation: 3.28 versus 2.29 and 1.90 (P = 0.001); second ablation: 4.10 versus 3.01 and 2.01 (P = 0.001)). Canalograms indicated circumferential flow beyond the ablation endpoints. Conclusions: T, G and K significantly increased the outflow facility. In this model, T had a larger effect than G and K.

The most common long-term complication of silicone breast implants (SMI) remains capsular fibrosis. The etiology of this exaggerated implant encapsulation is multifactorial but primarily induced by the host response towards the foreign material silicone. Identified risk factors included specific implant topographies. Of note, breast implant-associated anaplastic large cell lymphoma (BIA-ALCL), has only been observed in response to textured surface implants. We hypothesize that reduction of SMI surface roughness causes less host response hence better cosmetic outcome with fewer complications for the patient. A total of 7 patients received the routinely used CPX®4 breast expander (~60 µM Ra) and the novel SmoothSilk® (~ 4 µM Ra), fixed prepectoral with a titanised mesh pocket and randomized to the left or right breast after bilateral prophylactic NSME (nipple-sparing mastectomy). We aimed to compare the postoperative outcome regarding capsule thickness, seroma formation, rippling, implant dislocation as well as comfortability and practicability. Our analysis shows that surface roughness is an influential parameter in controlling fibrotic implant encapsulation. First time intra-individually compared in patients, our data confirm an improved biocompatibility with minor capsule formation around SmoothSilk® implants with an average shell roughness of 4 µM and in addition an amplification of host response by titanised implant pockets.

The majority of contemporary total hip arthroplasty (THA) implants are constructed from Ti-alloys, which are generally believed to generate fewer adverse local tissue reactions (ALTR) compared to CoCr-alloys. This study presents a case of unusual primary THA failure where a substantial release of Ti-alloy debris was observed. A 52-year-old active male underwent THA after posttraumatic aseptic necrosis of the femoral head in 2006. Seventeen years after the procedure, the patient presented with groin pain and restricted range of motion. X-rays revealed protrusion of the alumina ceramic head through the Ti6Al4V acetabular cup. Trace element analysis indicated significantly elevated levels of serum Ti, Al and V. CT and MRI confirmed Ti-alloy cup failure and severe ALTR. During revision surgery, the worn-out ceramic head was in direct contact with the acetabular cup, having protruded through the central hole it created over time. Histological analysis of tissue samples showed wear-induced synovitis with areas of multinucleated foreign-body giant cells and accumulation of numerous metal particles but no acute inflammatory response. Six months after the revision THA, the patient has experienced favourable outcomes. This case provides an instructive illustration for studying the consequences of substantial release of Ti-alloy debris from orthopaedic implants.

Purpose: The objective of the study was to qualitatively assess micro-gap dimensions, connecting fitting surface profile and bacterial leakage of machined and cast high gold alloy UCLA abutments, with or without electrodeposited gold coatings attached to external hexagon implants. Materials and methods: 16 plastic UCLA (PUCLA) and 5 machined cast-to UCLA (GUCLA) abutments were cast with a high gold content alloy. 10 were electrolytically gold plated (8 - PUCLA, 2 - GUCLA). All abutments were attached to implants giving 21 implant-abutment combinations (IACs). External perimeter micro-gaps measured with SEM under different illumination and magnification conditions were averaged over three regions. The IACs were examined for E.coli leakage following an initial sterility test. Disassembled combinations were examined with SEM and surface profiles qualitatively assessed. Results: External micro-gap measurements did not reflect the variable connecting surface profiles but average values < 3.5 μm were observed for all IACs. Bacterial transfer was observed in 3 of 5 PUCLA plated and 2 of 5 PUCLA non-plated IACs. No transfer occurred in the 3 GUCLA non-plated or 2 GUCLA plated IACs. Abutment connecting surfaces, both Au plated and not Au plated, showed plastic deformation (smearing) in variable mosaic patterns across the micro-gap. External micro-gap dimensions although not truly reflective of surface connecting profiles averaged < 3.5 μm measured under shadow eliminating silhouette illumination for both cast and pre-machined external hexagon abutments with and without Au plating. Conclusions: Micro-gap dimensions < 5 μm were obtained with both high noble metal cast and pre-machined external hexagon abutments with and without Au electrodeposited on the abutment connecting surface. Regions of intimate contact due to plastic deformation (smearing) of these surfaces was observed. A continuous smeared region around the circumference of the surfaces can provide an effective barrier to egress of E.coli bacteria from the internal regions of the implant under static loading.

Electric stimulation via a Cochlear Implant (CI) enables people with severe to profound sensorineural hearing loss to regain speech understanding and music appreciation and thus allowing them to actively engage in social life. Three main manufacturers (Cochlear, MED-EL and Advanced Bionics “AB”) have been offering CI systems, thus challenging CI recipients and Otolaryngologists with a difficult decision, as currently no comprehensive overview or meta-analyses on performance outcome following CI implantation is available. The main goal of this scoping review is to provide evidence that data and standardized speech and music performance tests are available for performing such comparisons. To this end, a literature search was conducted to find studies that address speech and music outcomes in CI recipients. From a total of 1592 papers, 188 paper abstracts were analyzed and 147 articles were found suitable for examination of full text. From which, 42 studies were included for synthesis. A total of 16 studies used the consonant-nucleus-consonant (CNC) word recognition test in quiet at 60db SPL. We found that aside from technical comparisons, only very few publications compare speech outcomes across manufacturers of CI systems. Evidence suggests though, that these data are available in large CI centers in Germany and US. Future studies should therefore leverage large data cohorts to perform such comparisons that could provide critical evaluation criteria and assist both CI recipients and Otolaryngologists to make informed performance-based decisions.

Background: The objective of the present study was to evaluate the formation of biofilm in bone patellar tendon bone grafts (BPTB grafts) and to compare it to the formation of biofilm formation in quadrupled hamstring anterior cruciate ligament grafts (4xHt graft). Methods: A descriptive in vitro study was conducted. One 4xHt graft and one BPTB graft were prepared. They were then contaminated with a strain of S. epidermidis. Later, a quantitative analysis was carried out by means of microcalorimetry and sonication with plating. Additionally, a qualitative analysis was carried out by means of electron microscopy. Results: No significant differences were found between the bacterial growth profiles of 4xHt graft and BPTB graft in microcalorimetry and colony counting. In the samples analyzed with electron microscopy, no specific biofilm growth pattern was identified upon comparing BPTB graft to 4xHt graft. Conclusions: There were no significant differences at either the quantitative or qualitative level when comparing bacterial growth in BPTB graft to that in 4xHt graft. Therefore, the presence of sutures in 4xHt graft cannot be established as a predisposing factor for increased biofilm growth in this in vitro study.

Growth-preserving instrumentation techniques are utilized in early-onset scoliosis (EOS) cases requiring surgical intervention. Shilla technique corrects the deformity and may reduce the need for surgical treatment with its growth-directing effect. As with other techniques, various prob-lems can be encountered following the administration of the Shilla technique. The aim of this study was to examine the effect of complications encountered with Shilla treatment on correction and growth. Sixteen patients with a follow-up period of at least 1 year who received Shilla growth guidance for EOS were included in the study. No complications occurred in 50% cases and no unplanned surgery was required. Of the remaining 8 patients with postoperative im-plant-related complications (50%), 6 (37.5%) required unplanned surgery; this consequently caused implant failure in the proximal region in 5 cases (31.25%) and deep tissue infection around the implant in 1 case (6.25%). Deformity correction, spine length, and quality-of-life scores significantly improved in EOS through Shilla growth guidance. Although implant-related com-plications were observed and related unplanned surgeries were required with Shilla growth guidance in our patients, these complications did not have a significant negative effect on correc-tion and spine growth.

Variations in the implant thread shape and occlusal load behavior may result in significant changes in the biological and mechanical properties of dental implants and surrounding bone tissue. Most previous studies consider a single implant thread design, an isotropic bone structure, and a static occlusal load. However, the effects of different thread designs, bone material properties, and loading conditions are important concerns in clinical practice. Accordingly, the present study performs Finite Element Analysis (FEA) simulations to investigate the static, quasi-static and dynamic response of the implant and implanted bone material under various thread designs and occlusal loading directions (buccal-lingual, mesiodistal and apical). The simulations focus specifically on the von Mises stress, displacement, shear stress, compressive stress and tensile stress within the implant and the surrounding bone. The results show that the thread design and occlusal loading rate have a significant effect on the stress distribution and deformation of the implant and bone structure during clinical applications. Overall, the results provide a useful insight into the design of enhanced dental implants for an improved load transfer efficiency and success rate.

Objective: CAD/CAM generated ceramic implant abutments have recently attracted interest due to their superior customization possibilities and aesthetic advantages. Despite their widespread clinical use, little information is currently available on their surface topography, however. The transmucosal portion of the abutment shoulder is of particular interest, as it ideally supports soft tissue but minimizes mechanical plaque retention. The aim of this in vitro study was to topographically characterize the trans- and subgingival roughness of CAD/CAM zirconia abutments from different manufacturers and compare them with zirconia stock abutments. Material and Method: The surface topography of eight CAD/CAM zirconia implant abutments (tests) and two prefabricated zirconia stock abutments (controls) was determined using focus variation microscopy. Two points on the abutment shoulder were subjected to profilometric examination. 2D and 3D parameters of roughness were obtained and compared. Results: The surface roughness of all the test abutments exceeded the recommended threshold of Ra = 0.2 µm and therefore exhibited an increased risk of mechanical plaque retention. Obvious differences in surface structure were apparent, allowing conclusions to be drawn about the manufacturing method and subsequent reworking processes. Conclusion: Manually reworking the trans- and submucosal area of the investigated CAD/CAM zirconia abutments appears necessary to fulfil the conditions for optimal surface topography. The Sa value as arithmetic mean, taking the maximum height (Sz value) and surface excess (Sdr) into account, is an essential parameter for assessing the surface topography of implant abutments.

The North Railway in the Kingdom of Saudi Arabia (KSA) extends over vast areas, crossing various terrains, including valleys, sand veins, plateaus, and hills. Therefore, the Railway was designed and implemented to suit this environmental diversity under the highest safety standards. However, the Railway may be subject to hazards for various reasons. In general, the possibility of direct surface runoff disasters increases if there are residential areas and facilities within the boundaries of drainage basins. Therefore, these areas should be studied, and the degree of hazard in drainage basins should be accurately determined. Hence, this study analyzed the degree of risk of 14 drainage basins affecting the North Train railway within the Wadi Malham drainage basin, using the risk degree model with eight parameters that have hydrological indications to give an idea of the behavior of direct surface runoff and interfere with increasing the risk of direct surface runoff. Researchers found 28.57% of the total basins in the study area have high-risk basin overall score values, which are basins 6, 7, 13, and 14. It is recommended to estimate the rainfall depth during different return periods, analyze soil permeability and land use classification in the study area, and apply hydrological modeling of drainage basins, which contributes to estimating the volume and peak of direct surface runoff in such arid and semi-arid environments that do not contain hydrometric stations to monitor the runoff. .

The consequences of growing urbanization can be perceived in multiple levels around the globe: overpopulated living conditions, water and air pollution, loss of open space, costly transportation infrastructure, food shortages, fires and floods. The Houston metropolitan area is an example of fast urban growth, with a population increase of more than sixteen percent in seven years, going from 5.8 million people in 2010 to 6.9 million in 2017 [1]. By 2045, the robust growth of the region is projected to lead to the addition of approximately five hundred square miles of developed area, including an estimated six million parking spaces, seven hundred eighty million square feet of non-residential uses, and three and a half billion square feet of residential use [2]. The accelerated development, in addition to physical features, geomorphic processes and human activities in the region are believed to have caused Houston to suffer through over fifty devastating floods since its settlement, despite some successful flood damage reduction projects. The present study focused on the potential outcomes of an increased use of green infrastructure in comparable urban areas, and its effects on flooding volume. Results from the research revealed that not only these measures would likely improve the performance of existing urban drainage systems and attenuate flood incidence in the area, but would also promote connectivity between areas otherwise detached or only accessible by car, improving walkability and incentivizing engagement in outdoor activities.

Progressive loss of retinal ganglionic cells (RGC) causes blindness in glaucoma. Elevated intraocular pressure (IOP) is the most important, treatable risk factor. Currently, the management of glaucoma is centred at reducing the IOP, and drugs in the form of topical drops are the first line of management. Drugs reduce IOP either by suppressing aqueous humour secretion or improving the aqueous humour outflow. Newer drugs added during the past three decades to the armamentarium of glaucoma treatment have targeted the aqueous outflow. With an evolving understanding of the pathogenesis of glaucoma, the role of 24-hour IOP control and other IOP-independent risk factors affecting ocular blood flow and RGC toxicity is also recognised. The role of available drugs in controlling IOP over 24-hours is being evaluated. Improvement of ocular blood flow and neuroprotection are seen as potential drug targets in preventing the loss of RGC. In this article, we review the pharmacotherapy of glaucoma based on current therapeutic principles.

The early failure of glaucoma surgery is mainly caused by an overly fibrosis at the subconjunctival space causing obliteration of the filtration bleb. Because fibrosis has a suspected basis of genetic predisposition, we have undertaken a prospective study to identify upregulated profibrotic genes in a population of glaucoma patients with signs of conjunctival fibrosis and early postoperative surgical failure. Clinical data of re-operated fibrosis patients, hyperfibrosis patients re-operated more than once in a short time, and control patients with no fibrosis were recorded and analyzed at each follow-up visit. Conjunctival-Tenon surgical specimens were obtained intraoperatively to evaluate the local expression of a panel of genes potentially associated with fibrosis. In order to correlate gene expression signature with protein levels, we quantified secreted proteins in primary cultures of fibroblasts from patients. Expression of VEGF-A, IL-8, C-MYC, and CDKN1A was induced in the conjunctiva of hyperfibrosis patients. VEGF-A and IL-8 protein levels were also increased in fibroblast supernatants. We propose that these proteins may act as biomarkers of conjunctival fibrosis in glaucoma patients undergoing filtering surgery. Molecular markers could be crucial for early detection of patients at high risk of failure of filtration surgery leading to more optimal and personalized treatments.

Imaging of the ocular vasculature can provide new insights into the pathophysiology of ocular diseases. This study proposes a novel high-frequency super-resolution ultrasound localization microscopy (SRULM) technique and evaluates its ability to measure in vivo perfusion changes in the rat eye at elevated intraocular pressure (IOP). A 38.4 MHz center frequency linear array transducer on a VisualSonics Vevo F2 imaging platform was used to collect high frame rate (1 kHz) radiofrequency data of the posterior rat eye following systemic microbubble contrast injection. Following clutter and spatiotemporal non-local means filtering, individual microbubbles were localized and tracked. The microbubble tracks were accumulated over 10,000 frames to generate vascular images quantifying perfusion velocity and direction. Experiments were performed using physiologic relevant controlled flow states for algorithm validation and subsequently performed in vivo on the rat eye at 10 mm Hg IOP increments from 10 to 60 mm Hg. The posterior vasculature of the rat eye, including the ophthalmic artery, long posterior ciliary arteries and their branches, central retinal artery and retinal arterioles and venules were successfully visualized, and velocities quantified at each IOP level. Significant reductions in arterial flow were measured as IOP was elevated. High-frequency SRULM can be used to visualize and quantify perfusion velocity of the rat eye in both the retrobulbar and intraocular vasculature simultaneously. The ability to detect ocular perfusion changes throughout the depth of the eye may help elucidate the role ischemia has in the pathophysiology of ocular diseases such as glaucoma.

Purpose: To investigate the relationship of lamina cribrosa displacement to corneal biomechanical properties and visual function after mitomycin C-augmented trabeculectomy. Method: Eighty-one primary open angle eyes were imaged before and after trabeculectomy using an enhanced depth spectral-domain optical coherence tomography (SDOCT). Corneal biomechanical properties were measured with the Ocular Response Analyser before the surgery. The anterior lamina cribrosa (LC) was marked at several points in each of six radial scans to evaluate LC displacement in response to Intraocular pressure (IOP) reduction. A Humphrey visual field test (HVF) was performed before the surgery as well as three and six months postoperatively. Results: Factors associated with a deeper baseline anterior lamina cribrosa depth (ALD) were cup-disc ratio (P=0.04), baseline IOP (P= 0.01), corneal hysteresis (P= 0.001), and corneal resistance factor (P= 0.001). After the surgery, the position of LC became more anterior (negative), posterior (positive) or remained unchanged. The mean LC displacement was -42 μm (P= 0.001) and was positively correlated with the magnitude of IOP reduction (regression coefficient: 0.251, P=0.02), and negatively correlated with age (regression coefficient: - 0.224, P= 0.04) as well as baseline cup-disk ratio (Regression coefficient: -0.212,P= 0.05) Eyes with a larger negative LC displacement were more likely to experience an HVF improvement of more than 3 dB gain in mean deviation (P= 0.002). Conclusion: A lower SDOCT cup-disc ratio, younger age, and a larger IOP reduction were correlated with a larger negative LC displacement and improving HVF. Corneal biomechanics did not predict LC displacement.

Objective: The Rho GTPase/Rho kinase pathway is an important target in glaucoma treatment. This study investigated the hypotensive effect of RKI-1447, a Rho kinase inhibitor developed for cancer treatment, in a porcine ex vivo pigmentary glaucoma model. Materials and Methods: Twenty-eight fresh porcine anterior chambers were perfused with pigment medium (1.67 × 10⁷ pigment particles/mL) for 48 hours before being subjected to the RKI-1447 (n = 16) or the vehicle control (n = 12). Another twelve eyes with normal medium perfusion served as the control. The intraocular pressure (IOP) was recorded at two-minute intervals and the outflow facility was calculated. To investigate the intracellular mechanism of the IOP reduction, primary trabecular meshwork cells were exposed to RKI-1447 or the vehicle control and then analyzed for changes in cytoskeleton, motility, and phagocytosis. Results: Compared to the baseline, the perfusion of pigment caused a significant increase in IOP in the RKI-1447 group (P = 0.003) at 48 hours. Subsequent treatment with RKI-1447 significantly reduced IOP from 20.14 ± 2.59 mmHg to 13.38 ± 0.91 mmHg (P = 0.02). Pigment perfusion reduced the outflow facility from 0.27 ± 0.03 at baseline to 0.18 ± 0.02 at 48 hours (P < 0.001). This was partially reversed with RKI-1447. RKI-1447 exhibited no apparent changes in the micro- or macroscopic appearance, including histology. Primary TM cells exposed to RKI-1447 showed a significant disruption of the actin cytoskeleton both in the presence and absence of pigment exposure (P < 0.001) but no effect on TM migration was observed. Pigment-treated TM cells exhibited a reduction in TM phagocytosis, which RKI reversed. Conclusions: RKI-1447 is a novel ROCK inhibitor that significantly reduces IOP by disrupting TM stress fibers and increasing TM phagocytosis. These features may make it especially useful for the treatment of secondary glaucomas with an increased phagocytosis load but also for other open angle glaucomas.

Background: The main objective of this study is to develop a customized metatarsophalangeal implant for the treatment of various conditions affecting this specific joint. This approach involves replacing the joint with a custom implant designed specifically to fit each patient's unique anatomical structure. The need for custom implants stems from the obvious lack of size variety available, which presents a major challenge when, the search for the ideal size implant can be a hard task, also when considering the possibility of extensive modification of the bone to adapt it to the available implant. This adaptation, often synonymous with bone reduction, can cause significant post-operative pain for the patient and impact healing time. Methods: A comparative study of modeling software was carried out to select the perfect software, by defining and comparing the relevant criteria. Similarly, the different biomaterial options were examined and compared to select the one best suited to this project, mentioning the imaging modality used to determine the types of images used for our approach. Finally, the 3D printers used in this work were represented, highlighting their technical characteristics. Findings: A resin metatarsophalangeal implant prototype was created using 3D modeling and reconstruction software and tools. Interpretation: Reconstruction and 3D modeling techniques are revolutionizing implant creation, offering customized solutions for patients suffering from metatarsophalangeal joint disorders caused by a wide range of diseases. These results have significant implications for disability management and rehabilitation, encouraging further exploration and progress.

The advent of zirconia ceramics with excellent mechanical, biomechanical and optical properties has made it an attractive metal-free substitute for titanium implants. Both animal and human studies have documented shortcomings with titanium implants. A review of the current literature on 3 iterations of zirconia implant designs has been challenging due to heterogeneous success data and limited follow-up. Zirconia implants hold promise for a new generation of dental implants, but technical developments are needed for design and material enhancements that will need to be validated by long-term rigorous studies.

A maxillary totally edentulism was rehabilitated with one-piece implants starting from pre-existing totally removable denture. A 3D digital scan of the removable denture and upper and lower arches was performed. On this basis, a prototype with optimal esthetic and functional outcomes was re-alized and turned into a custom-made radiological stent with markers. The superimposition of STL and DICOM files allowed the virtual planning of one-piece implants ideal position. The stackable templates composed of a fixed component, namely base template, and removable components, were realized. The fixed component, once secured with anchor pins to the bone, was no longer removed. The removable components, screwed to the fixed component, were used to perform the implant surgery and the immediate prosthetic loading. A base template allowed for maintaining a fixed reference during the entire workflow, improving the transition between the digital project, the surgical procedure, and the prosthetic rehabilitation.

Finite element (FE) modeling is commonly used as a method to investigate the influence of medical devices, such as implants and screws and their effects on the biomechanical behavior of the spine. Another simulation method is a multi-body simulation (MBS), where the model is composed of several non-deformable bodies. MBS solvers generally require a very short computing time for dynamic tasks compared to an FE analysis. Considering this computational advantage, in this study, we examine whether parameters whose values are not known a priory can be determined with sufficient accuracy using MBS model. Therefore, we propose a Many-at-a-time sensitivity analysis method that allows approximating these a priory unknown parameters without requiring long simulation times. This method enables a high degree of MBS model optimization to be achieved in an iterative process. The sensitivity analysis method is applied to a simplified screw-vertebra model, consisting of an anterior anchor implant screw and vertebral body of C4. An experiment described in the literature is used as a basis for developing and assessing the potential of the method for sensitivity analysis and to validate the models action. The optimal model parameters for the MBS model were determined to be c=823224N/m for stiffness and d=488Ns/m for damping. The presented method of parameter identification can be used in studies including more complex MBS spine models or to set initial parameter values that are not available as initial values for FE models.

Cervical fusion has been a standard procedure for treating the abnormalities associated with the cervical spine. However, the reliability of anterior cervical discectomy and fusion (ACDF) has become arguable due to its adverse effects on the biomechanics of adjacent segments. One of the drawbacks associated with ACDF is adjacent segment degeneration (ASD) which has served as the base for the development of dynamic stabilization systems (DSS) and total disc replacement (TDR) devices for cervical spine. However, the hybrid surgical technique has also gained popularity recently but their effect on the biomechanics of cervical spine is not well researched. Thus, the objective of this FE study was to draw the comparison among single, bi-level and hybrid surgery with DCI implant with traditional fusion. Reduction in range of motion (ROM) for all the implanted models was observed for all the motions except extension, compared to intact model. The maximum increase in ROM of 42% was observed at C5-C6 level in Hybrid-DCI model. The maximum increase in adjacent segment’s ROM of 8.7% was observed in multilevel fusion model. The maximum von Mises stress in the implant was highest for the multilevel DCI model. Our study also showed that the shape of DCI implant permits flexion/extension relatively more compared to lateral bending and axial rotation.

Background: Idiopathic normal pressure hydrocephalus is a syndrome with neuroradiological findings and clinical pattern characteristic but not specific for the pathology. Since the prevalence is growing due to the rapidly aging society, standardized and validated protocol for diagnosis is needed, also because this condition may mimic other disorders among elderly such as Parkinson's and Alzheimer's disease. Material and methods: We analysed data from 44 patients with suspect diagnosis of idiopathic normal pressure hydrocephalus with age > 60 years, clinical triad and neuroradiological pattern examined in our ward from November 2018 to November 2022. Neu-ropsychological assessment includes Mini Mental State Examination and Mental Deterioration Battery. Motor scores were collected from gait and balance tests. The evaluation was performed before and after an extended lumbar drainage last 48h. Patients who has scores improvement after the extended lumbar drainage, undergo ventriculoperitoneal shunt with a programmable valve. Results: All patients undergo neuropsychological assessment and motor tests, only 2 patients were unable to perform motor tests because bedridden. 16 patients showed no benefit from the tests, in 2 cases even a worsening of cognitive performance. 28 patients showed an improvement in their performances, but in most cases the improvement involved only the neuropsychological as-sessment. All patients underwent ventriculoperitoneal shunt have had a typical answers pattern in Mental Deterioration Battery test. We performed 9 ventriculoperitoneal shunt and 1 ventricu-lo-atrial shunt. Conclusions: Qualitative neurocognitive tests come out to be more sensitive compared to quantitative neurocognitive tests in identifying patients with suspected idiopathic normal pressure hydrocephalus benefiting from extended lumbar drainage test and then un-derwent surgical treatment. This could be considered a valid screening in elderly patients with suspected idiopathic normal pressure hydrocephalus in order to minimize the number of invasive procedures. More studies are necessary to validate this tool.

Subsurface drainage systems remove excess water from the soil profile thereby improving crop yields in poorly drained farmland. Knowledge of the position of the buried drain lines is important: 1) to improve understanding of leaching and offsite release of nutrients and pesticides, and 2) for the installation of a new set of drain lines between the old ones for enhanced soil water removal efficiency. Traditional methods of drainage mapping involve the use of tile probes and trenching equipment. While these can be effective, they are also time-consuming, labor-intensive, and invasive, thereby entailing an inherent risk of damaging the drainpipes. Non-invasive geophysical soil sensors provide a potential alternative solution. Previous research has focused on the use of time-domain ground penetrating radar (GPR), with variable success depending on local soil and hydrological conditions and the central frequency of the specific equipment employed. The objectives of this study were 1) to test the use of a stepped-frequency continuous wave (SFCW) 3D-GPR (GeoScope Mk IV 3D-Radar with DXG1820 antenna array) for subsurface drainage mapping, and 2) to evaluate the performance of a 3D-GPR with the use of a single-frequency multi-receiver electromagnetic induction (EMI) sensor (DUALEM) in-combination. The 3D-GPR system offers more flexibility for application to different (sub)surface conditions due to the coverage of wide frequency bandwidth. The EMI sensor simultaneously provides information about the apparent electrical conductivity (EC_a) for different soil volumes, corresponding to different depths. This sensor combination was evaluated on twelve different study sites with various soil types with textures ranging from sand to clay till. While the 3-D GPR showed a high success rate in finding the drainpipes at five sites (sandy, sandy loam, loamy sand, and organic topsoils), the results at the other seven sites were less successful due to limited penetration depth (PD) of the 3D-GPR signal. The results suggest that the electrical conductivity estimates produced by the inversion of EC_a data measured by the DUALEM sensor could be a useful proxy to explain the success achieved by the 3D-GPR in finding the drain lines. The high attenuation of electromagnetic waves in highly conductive media limiting the PD of the 3D-GPR can explain the findings obtained in this research.

Visual impairment and blindness are a growing public health problem, as they reduce the quality of life of millions of people. The management and treatment of these diseases represent a scientific and therapeutic challenge, since the different cellular and molecular actors involved in the pathophysiology are still being identified. The visual system components, particularly the retinal cells, are extremely sensitive to genetic or metabolic alterations, and immune cells activated by insults contribute to biological events that culminate with vision loss and irreversible blindness. Several ocular diseases are linked to retinal cell loss, and diseases such as retinitis pigmentosa, age-related macular degeneration, glaucoma and diabetic retinopathy are characterized by pathophysiological hallmarks that represent possibilities to study and develop novel treatments for retinal cells degeneration. Here, we present a compilation of revisited information on retinal degeneration, including pathophysiologic and molecular features, biochemical hallmarks and possible directions for novel treatments, aiming to assist as a guide for innovative research. The expansion of knowledge of the mechanistic bases of the pathobiology of eye diseases, including information on the complex interactions of genetic predisposition, chronic inflammation, and environmental and aging-related factors will allow the identification of new therapeutic strategies.

Glaucomatous optic neuropathy, a major cause of blindness, is characterized by the loss of retinal gan-glion cells (RGCs) and degeneration of their axons. Mitochondria are deeply involved in maintaining RGCs and their axons. Therefore, lots of attempts have been made to develop diagnostic tools and therapies tar-geting mitochondria. Recently, we reported that mitochondria are uniformly distributed in unmyelinated axons of RGCs, possibly owing to the ATP gradient. Thus, using transgenic mice expressing yellow fluo-rescent protein targeting mitochondria exclusively in RGCs within the retina, we assessed the alteration of mitochondrial distributions induced by optic nerve crush (ONC) via in vitro flat-mount retinal sections and in vivo fundus images captured through the cornea with a confocal scanning ophthalmoscope. We observed that the mitochondrial distribution in unmyelinated axons of RGCs that survived the ONC remained uni-form, although their density increased. Furthermore, via in vitro analysis, we discovered that the mitochon-drial size is attenuated following ONC. These results suggest that ONC induces mitochondrial fission without disrupting the uniform mitochondrial distribution. This mechanism may help to prevent axonal degeneration and apoptosis. The in vivo visualization system of axonal mitochondria in RGCs may be ap-plicable in the diagnosis of progression of optic neuropathy.

Pigment dispersion can lead to pigmentary glaucoma, a poorly understood condition of younger myopic eyes with fluctuating high intraocular pressure. It has been difficult to investigate its pathogenesis without a model similar to human eyes in size and behavior. Here we present a porcine ex vivo model that recreates several features of pigmentary glaucoma, including intraocular hypertension, accumulation of pigment in the trabecular meshwork, and declining phagocytosis. We found that trabecular meshwork cells regulate outflow, form actin stress fibers, and have a decreased phagocytic activity. Gene expression microarrays and a pathway analysis of TM monolayers as well as ex vivo anterior segment perfusion cultures indicated that RhoA plays a central role in regulating the cytoskeleton, motility, and phagocytosis in the trabecular meshwork, providing new insights and targets to investigate in pigmentary glaucoma.

Purpose: This study builds upon an established effective training method to investigate the advantages of high variability phonetic identification training for enhancing lexical tone perception and production in Mandarin-speaking pediatric cochlear implant (CI) recipients, who typically face ongoing challenges in these areas. Method: Thirty two Mandarin-speaking children with CIs were quasi-randomly assigned into the training group (TG) and the control group (CG). The sixteen TG participants received five sessions of high variability phonetic training (HVPT) within a period of three weeks. The CG participants did not receive the training. Perception and production of Mandarin tones were administered before (pretest) and immediately after (posttest) the completion of HVPT via lexical tone recognition task and picture naming task. Both groups participated in the identical pretest and posttest with the same time frame between the two test sessions. Results: TG showed significant improvement from pretest to posttest in identifying Mandarin tones for both trained and untrained speech stimuli. Moreover, perceptual learning of HVPT facilitated trainees’ lexical tone production as rated by a cohort of 10 Mandarin-speaking adults with normal hearing. In contrast, CG did not exhibit significant changes in either perception or production. Conclusion: The results represent initial evidence of HVPT-induced transfer of perceptual learning to lexical tone production in CI users, which supports the application of this speech training protocol to aural rehabilitation practice.

We studied short- and long-term effects of intravitreal injection of N-methyl-D-aspartate (NMDA) on melanopsin-containing (m⁺) and non-melanopsin-containing (Brn3a⁺) retinal ganglion cells (RGCs). In adult SD-rats, the left eye received a single intravitreal injection of 5µL of 100nM NMDA. At 3 and 15 months, retinal thickness was measured in vivo using SD-OCT. Ex vivo analyses were done at 3, 7, 14 days or 15 months after damage. Whole-mounted retinas were immunolabelled for Brn3a and melanopsin, the total number of Brn3a⁺RGCs and m⁺RGCs were quantified and their topography represented. In control retinas, the mean total numbers of Brn3a⁺RGCs and m⁺RGCs were 78,903±3,572 and 2,358±144 (mean ± SD; n=10), respectively. In the NMDA injected retinas, Brn3a⁺RGCs numbers diminished to 50% and 25%, at 3 and 14 days, respectively, but there was no further loss up to 15 months. The number of immunoidentified m⁺RGCs decreased significantly at 3 days, recovered between 3-7 days and was back to normal thereafter. OCT measurements revealed a significant thinning of the left retinas at 3 and 15 months. Intravitreal injections of NMDA induce a rapid loss of 75% of Brn3a⁺RGCs, a transient downregulation of melanopsin expression but not m⁺RGC death, and a thinning of the inner retinal layers.

Purpose: To investigate the effect of pigment dispersion on trabecular meshwork (TM) cells. Methods: Porcine TM cells from ab interno trabeculectomy specimens were exposed to pigment dispersion, then analyzed for changes in morphology, immunostaining, and ultrastructure. Their abilities to phagocytose, migrate, and contract were quantified. An expression microarray, using 23,937 probes, and a pathway analysis were performed. Results: TM cells readily phagocytosed pigment granules. Pigment induced stress fiber formation (pigment (P): 60.1 ± 0.3%, n = 10, control (C): 38.4 ± 2.5%, n = 11, P < 0.001) and contraction at 24 hours onward (P < 0.01). Phagocytosis declined (P: 68.7 ± 1.3%, C: 37.0 ± 1.1%, n = 3, P < 0.001) and migration was reduced after 6 hours (P: 28.0.1 ± 2.3, n = 12, C: 40.6 ± 3.3, n = 13, P < 0.01). Microarray analysis revealed that Rho, IGF-1, and TGFβ signaling cascades were central to these responses. Conclusions: TM cell exposure to pigment dispersion resulted in reduced phagocytosis and migration, as well as increased stress fiber formation and cell contraction. The Rho signaling pathway played a central and early role, suggesting that its inhibitors could be used as a specific intervention in treatment of pigmentary glaucoma.

Objectives (Purpose) This study aims to evaluate the outcomes of the Subcrestally Placed Implant (SPI) technique in single molar cases, focusing on biological stability and aesthetics. It proposes a schematic model to elucidate the interplay between the biological stability of soft tissues and bone around the SPI and the morphological requisites that Implant Abutment Prostheses (IAP) must fulfill to effectively replace natural teeth. Materials and methods I examined 20 cases using the SPI technique with Internal Platform Switching (IPS) design implants for single molar replacements to assess their stability. Routine check-ups utilized plain panoramic X-rays to measure changes in crestal bone on the mesial and distal sides. Additionally, 10 cases with CBCT X-rays taken more than one year after the initial surgery underwent a novel 3-dimensional soft tissue analysis (3DSTA). Measurements included placement depths (PD), soft tissue thickness (STT) at central (cPD, cSTT) and peripheral areas (pPD, pSTT), the length of the Transitional Zone (TZ) on mesial, distal, facial, and lingual aspects, and crestal bone thickness (CBT) at buccal and lingual sites. Results Panoramic analyses showed minimal changes in crestal bone (mean changes of pPD were less than 0.1 mm) over an average period of 3.3 years. Average measurements were as follows: cPD was 1.7 mm, pPD was 2.7 mm, cSTT was 0.2 mm, pSTT was 0.6 mm, TZ length was 3.8 mm, buccal CBT was 3.0 mm, and lingual CBT was 3.7 mm. Conclusions CBCT analyses of the topographical relationships between soft tissue and crestal bone with IAP for SPIs demonstrated stable results over an average 3-year period. The consistency in the relationship between crestal bone and surrounding soft tissue can be ascribed to biological structural integrity. The study classified peri-implant soft tissues into subcrestal and supracrestal (transitional zone – TZ) segments, exploring their characteristics through dimensional measurements and assessing mechanical resistance. Further histological study is needed to identify specific features of each segment.

The study aimed to evaluate implant success and bone height variations after transcrestal sinus floor elevation (tSFE) using the osseodensification technique (OD) combined with beta-tricalcium phosphate (β-TCP), as bone graft material and simultaneous implant placement. Thirteen patients requiring the placement of one implant in the upper posterior maxilla, with a residual bone height of

Due to the increase in the emission of greenhouse gases, the hydrologic cycle is being altered on the daily basis. This has affected the variations in relations of intensity, duration, and frequency of rainfall events. Intensity Duration Frequency (IDF) curves describe the relationship between rainfall intensity, rainfall duration and return period. IDF curves are one of the most often applied implements in water resource engineering, in areas such as for operating, planning and designing of water resource projects, or for numerous engineering projects aimed at controlling floods. In particular, IDF curves for precipitation answer problems of improper drainage systems or conditions and extreme characters of precipitation which are the main cause of floods in Nyabugogo catchment. This study aims to establish Rainfall IDF empirical equations, curves and hydrological discharge (predicted peak rate of runoff (Qlogy)) equations for eight Districts that will be used for designing an appropriate and sustainable hydraulic structures for controlling flood to reduce potential loss of human and aquatic life, degradation of water, air and soil quality and property damage and economic lessen caused by flood in Nyabugogo catchment. However Goodness of Fit tests revealed that Gumbel’s Extreme-Value Distribution method appears to have the most appropriate fit compared with Pearson type III distribution for validating the Intensity-Duration-Frequency curves and equations through the use of daily annual for each meteorological station. The findings of the study show that the intensity of rainfall increases with a decrease in rainfall duration. Additionally, a rainfall of every known duration will have a higher intensity if its return period is high, while the predicted peak rate of runoff (Qlogy) increases also with an increase in the intensity of rainfall.

Accurate and reliable project cost estimates are fundamental to achieve successful municipal capital improvement (CIP) programs. Engineering cost estimates typically represent critical information for key decision makers to authorize and efficiently allocate the necessary funds for construction, budgeting, to generate a request for proposals, contract negotiations, scheduling, etc. for these reasons, cost estimators are using different estimating methods and approaches that allow for required levels of accuracy. As the project’s scope becomes more detailed and the potential risks are identified and/or the project design stage progresses these cost estimates are revised and updated. In this paper, the most common project cost estimation methods and approaches were collected and categorized into two main groups of (1) probabilistic and (2) deterministic methods. Under these groups overall ten different methods were identified and discussed addressing their requirements, advantages, and shortcomings, including the potential risk that can positively or negatively affect the project’s cost outcome. This paper will be a good resource for professionals who are in budget development and/or are seeking to a better understanding of different methods in determining an appropriate base cost margin and produce a meaningful and reliable project cost estimate.

Optic nerve disorders encompass a wide spectrum of conditions characterized by the loss of retinal ganglion cells (RGCs) and subsequent degeneration of the optic nerve. The etiology of these disorders can vary significantly, but emerging research highlights the crucial role of oxidative stress, an imbalance in the redox status characterized by an excess of reactive oxygen species (ROS), in driving cell death through apoptosis, autophagy, and inflammation. This review provides an overview of ROS-related processes underlying four extensively studied optic nerve diseases: glaucoma, Leber's hereditary optic neuropathy (LHON), anterior ischemic optic neuropathy (AION), and optic neuritis (ON). Furthermore, we present preclinical findings on antioxidants, with the objective of evaluating the potential therapeutic benefits of targeting oxidative stress in the treatment of optic neuropathies.

Aseptic implant loosening after total joint replacement is partially influenced by material-specific factors when cobalt-chromium alloys are used, including osteolysis induced by wear- and corrosion products, and stress shielding. Here, we aim to characterize a hybrid material consisting of alumina-toughened zirconia ceramics (ATZ) and additively manufactured Ti-35Nb-6Ta (TiNbTa), joined by a glass solder. The structure of the joint, static and fatigue shear strength, the influence of accelerated aging, and the cytotoxicity using an elution assay with human osteoblasts is characterized. Furthermore, the biomechanical properties of functional demonstrators of a femoral component for total knee replacements are evaluated. TiNbTa-ATZ specimens showed a homogenous joint with statistical distributed micro-pores and a slight accumulation of Al-rich compounds at the glass solder-TiNbTa interface. The static shear strength was 26.4 ± 4.2 MPa (Ti-ATZ reference: 38.2 ± 14.4 MPa, p = 0.117), all specimens survived 107 cycles of shear loading to 10 MPa, and aging did not reduce the strength. TiNbTa-ATZ did not impair the proliferation and metabolic activity of human osteoblasts. Functional demonstrators of TiNbTa-ATZ provided a maximum bearable extension-flexion moment of 40.7 ± 2.2 Nm. Biomechanical and biological properties of TiNbTa-ATZ demonstrate potential application for endoprosthetic implants.

Floods are one of the most wide-spread, frequent, and devastating natural disasters that continue to increase in frequency and intensity. Remote sensing, specifically synthetic aperture radar (SAR), has been widely used to detect surface water inundation to provide retrospective and near-real time (NRT) information due to its high-spatial resolution, self-illumination, and low atmospheric attenuation. However, the efficacy of flood inundation mapping with SAR is susceptible to reflections and scattering from a variety of factors including dense vegetation and urban areas. In this study, the topographic dataset height above nearest drainage (HAND) was investigated as a potential supplement to Sentinel-1A C-Band SAR along with supervised machine learning to improve the detection of inundation in heterogeneous areas. Three machine learning classifiers were trained on two sets of features SAR only (VV & VH) and VV, VH & HAND to map inundated areas. Three study sites along the Neuse River in North Carolina, USA during the record flood of Hurricane Matthew in October 2016 were selected. The binary classification analysis (inundated as positive vs. non-inundated as negative) revealed significant improvements when incorporating HAND in several metrics including classification accuracy (ACC) (+37.1%), true positive rate (TPR) (+51.2%), and negative predictive value (NPV) (+23.7%), A marginal improvement of +1.4% was seen for positive predictive value (PPV), but true negative rate (TNR) fell -15.1%. By incorporating HAND, a significant number of areas with high SAR backscatter but low HAND values were detected as inundated which increased true positives. This in turn also increased the false positives detected but to a lesser extent as evident in the metrics. This study demonstrates that HAND could be considered a valuable feature to enhance SAR flood inundation mapping especially in areas with heterogeneous land covers with dense vegetation that interfere with SAR.

Ascorbate; Pars Plana Vitrectomy; Open Angle Glaucoma; Oxidative Stress; Vitreous Me-tabolism 0. How to Use This Template

INTRODUCTION: Breast sensibility following reconstruction surgery, though often overlooked, holds significant importance due to its widespread occurrence and profound effects on patients’ well-being and safety. Our objective is to compare the sensory outcomes between DIEP flap microsurgery reconstruction and implant-based reconstruction. Additionally, we explored the potential influence of sociodemographic and clinical factors on sensory recovery, along with assessing temperature discrimination abilities and evaluating quality of life. MATERIAL AND METHODS: We conducted an ambispective descriptive-analytical study, involving women who underwent mastectomy with reconstruction using either DIEP flap and implants at our hospital between 1990 and 2021. Data were collected from medical records, patient histories, physical examination, and validated quality of life questionnaires (BREAST-Q). RESULTS: A total of 99 women with breast reconstruction were included, 47 with DIEP flap and 52 with implants. Sensory recovery in implant-based reconstruction was found to be superior to DIEP flap reconstruction (5.03 and 5.18 respectively, p-value &lt;0.005). A direct correlation was observed between sensory improvement and thermal discrimination (Spearman coefficient 0.9, p-value &lt;0.001). Factors such as radiotherapy, delayed reconstruction with DIEP flap, and height with implants were associated with poorer sensory recovery in the breast. Women experiencing better breast sensibility reported higher satisfaction with their surgeon, medical team, and psychosocial quality of life. CONCLUSION: Women reconstructed with implants or DIEP abdominal flap exhibit suboptimal overall sensory recovery of the reconstructed breast, with slightly better outcomes observed in women reconstructed with implants.

The incidence of breast cancer and therefore need for breast reconstruction is expected to increase. The many reconstructive options available and the changing aspects of the field make this a complex area of plastic surgery, requiring knowledge and expertise. Two major types of breast reconstruction can be distinguished: Breast Implants and Autologous Flaps. Both present advantages and disadvantages. Autologous fat grafting is also commonly used. MRI is the modality of choice for evaluating breast reconstruction. Knowledge of the type of reconstruction is preferable to provide the maximum of pertinent information and avoid false positives. Early complications include seroma, hematoma, and infection. Late complications depend on the type of reconstruction. Implant rupture and implant capsular contracture are frequently encountered. Depending on the implant type, specific MRI signs can be depicted. In case of myocutaneous flap, fat necrosis, fibrosis and vascular compromise represent the most common complications. Late cancer recurrence is much less common. Rare reported late complications include breast implant associated large cell anaplastic lymphoma (BIA-ALCL) and, recently described and even rarer, Breast implant-associated squamous cell carcinoma (BIA-SCC). In this review article, the various types of breast reconstruction will be presented, with emphasis on pertinent imaging findings and complications.

: Glaucoma is the most common cause of blindness, which significantly reduces quality of life. Most glaucoma cases are primary glaucoma; nevertheless, many patients suffer from glaucoma caused by drugs, such as corticosteroids. A comprehensive review of the risks associated with corticosteroid-induced glaucoma is limited. Therefore, we used the Japanese Adverse Drug Event Reporting Database (JADER) published by the Pharmaceuticals and Medical Devices Agency (PMDA) to analyze the risk factors associated with glaucoma and the trends and characteristics of corticosteroid-induced glaucoma. We did not find sex or age differences associated with the onset of glaucoma. Hierarchical clustering and principal component analysis revealed that triamcinolone acetonide and betamethasone sodium phosphate, which are used around the eyes in Japan, are more likely to induce intraocular pressure (IOP) elevation compared with other corticosteroids. Increased IOP is a direct cause of glaucoma. Based on these findings, it may be necessary to limit or avoid the use of these corticosteroids.

TiNbZrTa alloys are promising for multidisciplinary applications, such as refractory and biomedical purposes due to their high thermal stability and non-toxicity. Hardness and elastic modulus are among the key features for their adequate industrial applications. The influence of porosity and Ti/Ta ratio were investigated on TiNbZrTa alloys produced by three different processing routes, i.e., (i) blend element and posterior press and sintering (BE + P&amp;S), (ii) mechanical alloying with press and sintering (MA + P&amp;S), and (iii) arc melting and casting. Atomic diffusion was improved during processing, resulting in lower porosity in the following order: casting &lt; MA + P&amp;S &lt; BE + P&amp;S. Ta offered limited atomic diffusion due to its high melting point compared to other constituent elements. Thus, the total porosity of alloys increased with increasing the Ta contents, i.e., by lowering the Ti/Ta ratio. However, the Ti/Ta ratio did not considerably affect the bonding energy or the elastic modulus. Hardness was increased significantly in dense alloys compared to the porous ones. However, porosity and Ti/Ta ratio did not show a clear trend in hardness among the porous alloys.

Keywords: artificial bone; conical implants; cylindrical implants; dental implants; implant stability quotient; insertion torque; polyurethane; post-extraction sites; removal torque.

Objectives: Although pitch reception poses a great challenge for individuals with cochlear implants (CIs), formal auditory training (e.g., high variability phonetic training, HVPT) has been shown to provide direct benefits in pitch-related perceptual performances such as lexical tone recognition for CI users. As lexical tones in spoken language are expressed with a multitude of distinct spectral, temporal, and intensity cues, it is important to determine the sources of training benefits for CI users. The purpose of the present study was to conduct a rigorous fine-scale evaluation with the categorical perception (CP) paradigm to control the acoustic parameters and test the efficacy and sustainability of HVPT for Mandarin-speaking pediatric CI recipients. The main hypothesis was that HVPT-induced perceptual learning would greatly enhance CI users’ ability to extract the primary pitch contours from spoken words for lexical tone identification and discrimination. Furthermore, individual differences in immediate and long-term gains from training would likely be attributable to baseline performance and duration of CI use. Design: Twenty-eight prelingually deaf Mandarin-speaking kindergarteners with CIs were tested. Half of them received five sessions of HVPT within a period of three weeks. The other half served as control who did not receive the formal training. Two classical CP tasks on a tonal continuum from Mandarin Tone 1 (high-flat in pitch) to Tone 2 (mid-rising in pitch) with fixed acoustic features of duration and intensity were administered before (pretest), immediately after (posttest), and 10 weeks post training termination (follow-up test). Participants were instructed to either label a speech stimulus along the continuum (i.e., identification task) or determine whether a pair of stimuli separated by zero or two steps from the continuum was the same or different (i.e., discrimination task). Identification function measures (i.e., boundary position and boundary width) and discrimination function scores (i.e., between-category score, within-category score, and peakedness score) were assessed for each child participant across the three test sessions.Results: Linear mixed-effects (LME) models showed significant training-induced enhancement in lexical tone categorization with significantly narrower boundary width and better between-category discrimination in the immediate posttest over pretest for the trainees. Furthermore, training-induced gains were reliably retained in the follow-up test 10 weeks after training. By contrast, no significant changes were found in the control group across sessions. Regression analysis confirmed that baseline performance (i.e., boundary width in the pretest session) and duration of CI use were significant predictors for the magnitude of training-induced benefits. Conclusions: The stringent CP tests with synthesized stimuli that excluded acoustic cues other than the pitch contour and were never used in training showed strong evidence for the efficacy of HVPT in yielding immediate and sustained improvement in lexical tone categorization for Mandarin-speaking children with CIs. The training results and individual differences have remarkable implications for developing personalized computer-based short-term HVPT protocols that may have sustainable long-term benefits for aural rehabilitation in this clinical population.

Background: To compare the loss of preload in absence of loading and after a fixed number of ideal masticatory cycles in two different connection systems using all-on-four prosthetic model. Methods: Two equal models of an edentulous mandible rehabilitated with all-on-four technique with two types of abutment system (MUA and OT-Bridge) supporting a hybrid prosthesis, were used. Initial torque values of the prosthetic fixing screw, after ten minutes from initial screw tightening and after 400000 masticatory cycles were registered using a mechanical torque gauge. Differences between initial and final torque values were reported for each anchoring system and the two systems were finally compared. Results: No statistically significant differences regarding the loss of preload between MUA and OT-Bridge system were found after 400000 masticatory cycles; however, in MUA system it was found between anterior and posterior implant screws. A significant difference in preload loss was found only for MUA system comparing the initial screw torque to that measured after 10 minutes from the tightening in absence of cyclic loadings. Conclusions: MUA and OT-Bridge are reliable prosthetic anchoring systems able to tolerate repeated masticatory cycles also on distal cantilever in all-on-four rehabilitation model without any significant loss of preload in screw tightening

Breast cancer is the most common cancer in women globally, often necessitating mastectomy and subsequent breast reconstruction. Silicone mammary implants (SMIs) play a pivotal role in breast reconstruction, yet their interaction with the host immune system and microbiome remains poorly understood. This study investigates the impact of SMI surface topography on host antimicrobial responses, wound proteome dynamics, and microbial colonization. Biological samples were col-lected from ten human patients undergoing breast reconstruction with SMIs. Mass spectrometry profiles were analyzed for acute and chronic wound proteomes, revealing a nuanced interplay between topography and antimicrobial respondseproteins. 16S rRNA sequencing assessed mi-crobiome dynamics, unveiling topography-specific variations in microbial composition. Surface topography alterations influenced wound proteome composition. Microbiome analysis revealed heightened diversity around rougher SMIs, emphasizing topography-dependent microbial inva-sion. In vitro experiments confirmed staphylococcal adhesion, growth, and biofilm formation on SMI surfaces, with increased texture correlating positively with bacterial colonization. This comprehensive investigation highlights the intricate interplay between SMI topography, wound proteome dynamics, and microbial transmission. The findings contribute to understanding host-microbe interactions on SMI surfaces, essential for optimizing clinical applications and minimizing complications in breast reconstruction.

Acute kidney injury (AKI), especially if recurring represents a risk factor for future chronic kidney disease. In intensive care units, increased intraabdominal pressure is well-recognized as a significant contributor of AKI. However, the importance of transiently increased intra-abdominal pressures procedures is less commonly appreciated during laparoscopic surgery, the use of which has rapidly increased over the last few decades. Unlike the well-known autoregulation of the renal cortical circulation, medulla perfusion is modulated via partially independent regulatory mechanisms and strongly impacted by changes in venous and lymphatic pressures. In our review paper, we will provide a comprehensive overview of this evolving topic, covering a broad range from basic pathophysiology up to and including current clinical relevance. Key regulators of oxidative stress such as ischemia-reperfusion injury, the activation of inflammatory response and humoral changes interacting with procedural pneumoperitoneum formation and AKI risk will be recounted. Moreover, we present an in-depth review of the interaction of pneumoperitoneum formation with general anesthetic agents and animal models of congestive heart failure. A better understanding of the relationship between pneumoperitoneum formation and renal perfusion will support basic and clinical research, leading to improved clinical care and collaboration among specialists.

Cationised hemp cellulose was prepared by etherification with two quaternary ammonium salts: 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CHPTAC) and glycidyltrimethylammonium chloride (GTMAC) and examined for (i) the efficiency of Cr(VI) removal under acid mine-drainage (AMD) conditions, and (ii) antibacterial activity. Adsorbents were characterised by electron microscopy, Fourier transform infrared (FTIR), CP-MAS ¹³C nuclear magnetic resonance (NMR) spectroscopy, elemental composition and surface charge. FTIR and solid state ¹³C NMR confirmed the introduction of quaternary ammonium moieties on cellulose. ¹³C NMR also showed that cationisation decreased the degree of crystallisation and lateral dimensions of cellulose fibrils. Nevertheless, 47 % - 72% of Cr(VI) ions were removed from solutions at pH 4, by 0.1 g of CHPTAC and GTMAC-cationised cellulose, respectively. Adsorption kinetics followed the pseudo-second order model and isotherms were best described by the Freundlich and Dubinin-Radushkevich models. When GTMAC-modified cellulose was applied to AMD contaminated water (pH 2.7), however, Cr(VI) uptake removal decreased to 22% likely due to competition from Al and Fe ions. Nevertheless, cationised materials displayed considerable antibacterial effects, reducing the viability of Escherichia coli by up to 45 % after just 3 hours of exposure. Together, these results suggest that cationised cellulose can be applied in the treatment of Cr(VI)-contaminated mine water particularly if pre-treatments to reduce Fe and Al concentrations are applied.

The human mandible's cancellous bone, which is characterized by its unique porosity and directional sensitivity to external forces, is crucial for sustaining biting stress. Traditional CAD models fail to fully represent bone's anisotropic structure and thus depend on simple isotropic assumptions. For our research, we use the latest versions of nTopology and Creo Parametric software to make biomimetic Voronoi lattice models that accurately reflect the complex geometry and mechanical properties of trabecular bone. The porosity of human cancellous bone is accurately modeled in this work using biomimetic Voronoi lattice models. The porosities range from 70% to 95%, which can be achieved by changing the pore sizes to 1.0 mm, 1.5 mm, 2.0 mm, and 2.5 mm. Finite element analysis (FEA) was used to examine the displacements, stresses, and strains acting on dental implants with a buttress thread, abutment, retaining screw, and biting load surface. The results show that the Voronoi model accurately depicts the complex anatomy of the trabecular bone in the human jaw, compared to standard solid block models. The ideal pore size for biomimetic Voronoi lattice trabecular bone models is 2 mm, taking into account both the von Mises stress distribution over the dental implant, screw retention, cortical bone, cancellous bone, and micromotions. This pore size displayed balanced performance by successfully matching natural bone's mechanical characteristics. Advanced finite element analysis (FEA) improves biomechanical understanding of how bones and implants interact by creating more accurate models of biological problems and dynamic loading situations. This makes biomechanical engineering better.

Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient's unique anatomy. Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor.

Sacroiliac (SI) joint dysfunction can lead to debilitating pain but can be treated with minimally invasive sacroiliac joint fusion (SIJF). This treatment is commonly performed using 2D fluoroscopic guidance. This makes placing the implants without damaging surrounding neural structures challenging. Virtual surgical planning (VSP) using simulated fluoroscopic images may improve perioperative guidance. This article describes a workflow with VSP in SIJF using simulated fluoroscopic images and evaluates achieved implant placement accuracy. Routinely collected survey data on the added value of VSP were also evaluated. Ten interventions were performed on 10 patients by the same surgeon, comprising 30 implants; the median age was 39 years, and all patients were female. The overall mean implant placement accuracy was 4.9 ± 1.26 mm and 4.0 ± 1.44°. There were no malpositioning complications. The VSP helped the surgeon understand the anatomy and determine the optimal position and length of the implants. The average Likert scale score of the survey was 4.7, suggesting a positive role of VSP for SIJF. Planned positions of the implants could be reproduced in surgery with clinically acceptable accuracy and VSP was a valuable asset for the surgeon.

Alveolar bone atrophy after tooth extraction presents significant difficulties when planning delayed-immediate implant treatment to replace a lost tooth. Socket augmentation is an effective therapy that limits the post extraction volumetric changes and facilitates implant placement whilst reducing the need for staged grafting. However, socket augmentation and osteoconductive graft conversion is a slow process that could take 4-6 months. PRF and its variants have significant bio-enhancement effect on wound healing and regeneration through release of platelet drived growth factors, bioactive substances, cytokines. Leukocytes in PRF also play a significant role in enhancing tissue regeneration as part of osteo-immune response. Use of PRF during socket augmentation is highly effective in enhancing extraction site healing and graft integration by angiogenesis, cell proliferation, recruitment, and differentiation through release of growth factors and bioactive substances mediated by platelets and leukocytes. PRF with SA is recommended as an adjunct to SA as a sole biomaterial or in combination with xenograft or allograft bone substitutes to enhance tissue regeneration and to reduce risk of infection, osteitis and postoperative pain in extraction sockets

Currently, there is increasing industrial demand for rare earth elements (REE) as these elements are now integral to the manufacture of many carbon-neutral technologies. The depleting REE ores and increasing mining costs are prompting to look for alternative sources for these valuable metals, particularly from waste streams. Although REE concentrations in most of the alternate resources are lower than current REE ores, some sources such as marine sediments, coal ash, and industrial wastes like red mud are looking promising with significant concentrations of REE in them. This review focuses on the alternative resources for REE such as ocean bottom sediments, continental shelf sediments, river sediments, stream sediments, lake sediments, phosphorites deposits, industrial waste products like red mud, and phosphogypsum, coal, coal fly ash, and related materials, waste rock sources from old and closed mines, acid mine drainage, and recycling of e-waste. Possible future Moon exploration and mining for REE and other valuable minerals are also discussed. It is evident that REE extractions from both primary and secondary ores alone are not adequate to meet the current demand, and sustainable REE recovery from the alternative resources described here is also necessary to meet the growing REE demand. An attempt is made to identify the potential of these alternative resources and sustainability challenges, benefits, and possible environmental hazards to meet the growing challenges in meeting the future REE requirements.