Hypoglossal nerve stimulator (HGNS) is a minimally invasive device used for treating obstructive sleep apnea (OSA). The conventional implantable HGNS is a device that consists of a stimuli generator, a breathing sensor, and electrodes connected to the hypoglossal nerve via leads. However, this implant is bulky and causes significant trauma. In this paper, we propose a minimally invasive HGNS based on an electrocardiogram (ECG) sensor and a wireless power transfer (WPT), consisting of a wearable breathing monitor and an implantable stimulator. The breathing external monitor utilizes an ECG sensor to identify abnormal breathing patterns associated with OSA with 88.68$\%$ accuracy, achieved through the utilization of a Convolutional Neural Network (CNN) algorithm. With a skin thickness of 5mm and a receiving coil diameter of 9mm, the power conversion efficiency was measured at 31.8$\%$. The implantable device, on the other hand, is composed of a front-end CMOS Power Management Module (PMM), a Binary Phase Shift Keying (BPSK)-based data demodulator, and a bipolar biphasic current stimuli generator. The PMM, with a silicon area of 0.06 $mm^2$ (excluding pads), demonstrates a power conversion efficiency of 77.5$\%$ when operating at a receiving frequency of 2 MHz. Furthermore, it offers three-voltage options (1.2V, 1.8V, and 3.1V). Within the data receiver component, a low-power BPSK demodulator has been ingeniously incorporated, consuming only 42 $\mu$W when supplied with a voltage of 0.7V. The performance is achieved through the implementation of the self-biased phase-locked loop (PLL) technique. The stimuli generator delivers biphasic constant currents, providing a 5-bit programmable range spanning from 0 to 2.4 mA. The functionality of proposed ECG and WPT-based HGNS was validated, representing a highly promising solution for the effective management of OSA, all while minimizing trauma and space requirements.

Background: The target volume for post-mastectomy radiation therapy (PMRT) in breast cancer patients with reconstruction has been a subject of debate. This study aimed to assess the radiation dose distribution and treatment outcomes associated with different chest wall (CW) delineation according to ESTRO ACROP guideline for patients underwent implant-based reconstruction. Methods: We conducted a retrospective review of breast cancer patients who underwent mastectomy followed by two-stage implant-based breast reconstruction and adjuvant radiation therapy (RT) between 2007 and 2022. The expanders/implants were positioned retropectorally. The chest wall target volumes were categorized into two groups: the prepectoral group, which excluded the deep lymphatic plexus, and the whole expander group. Results: The study included 26 patients, 15 in prepectoral group and 11 in whole expander group. No significant differences were observed in normal organs exposure between the two groups. There was a trend toward a lower ipsilateral lung mean dose in the prepectoral group (10.2 vs. 11.1 Gy, p=0.06). Both groups exhibited limited instances of reconstruction failure and local recurrence. Conclusions: For patients undergoing two-stage expander-implant retropectoral breast reconstruction and PMRT, our data have provided comparable outcomes and normal organs exposure for those omitting the deep lymphatic plexus.

Irrigation and debridement using an irrigation solution is a fundamental step during the surgi-cal treatment of both acute and chronic periprosthetic joint infection (PJI). However, there is no consensus on the optimal solution, nor is there sufficient evidence on optimal irrigation time and combination of solutions. Therefore, it is necessary to determine which solution or combi-nation of solutions is most efficacious against biofilm, as well as the optimal irrigation time. We conducted an experimental in vitro model by inoculating stainless steel discs with ATCC strains of methicillin-susceptible Staphylococcus aureus, methicillin-resistant S. aureus, Pseudomonas aeru-ginosa, and a clinical strain of Staphylococcus epidermidis. The discs were all irrigated with com-monly used antiseptic solutions (10% and 3% povidone iodine, hydrogen peroxide, 3% acetic ac-id, and Bactisure™) for 1 min, 3 min, and 5 min and their combinations for 9 min (3 min each) vs. sterile saline as a positive control. We evaluated the reduction in biofilm based on colony form-ing unit (cfu) counts and, in combination assays, also based on cell viability and scanning elec-tron microscopy. All antiseptics alone reduced more than 90% of cfu counts after 1 min of irriga-tion; the worst results were for hydrogen peroxide and 3% acetic acid. When solutions were combined, the best results were observed for all those starting with acetic acid, in terms of both reduction of log cfu/ml counts and viable cells. We consider that a combination of antiseptic so-lutions, particularly that comprising the sequence acetic acid+povidone iodine+hydrogen per-oxide, would be the best option for chemical debridement during PJI surgery.

Background - Mandibular flexion (MF) is a complex biomechanical phenomenon, which involves a deformation of the mandible, due mainly to the contraction of the masticatory muscles, and can have numerous clinical effects. The main aim of the current systematic review is to highlight the different factors that can increase MF, to help clinicians, identify patients to whom they should pay more attention. As a secondary outcome, we wanted to analyze the preventive measures and suitable techniques to be adopted to minimize the negative effects of this phenomenon on oral fixed rehabilitations. Methods - The review, which was carried out in accordance with the “Preferred Reporting Items for Systematic reviews and Meta-Analyses” (PRISMA) flowchart, was recorded in the “International Prospective Register of Systematic Reviews” (PROSPERO). As research questions, “Patient/Population, Intervention, Comparison and Outcomes” (PICO) questions were employed. Using the ROBINS-I technique, the risk of bias in non-randomized clinical studies was evaluated. Results - The initial electronic search identified over 1300 potential articles, of which 54 studies were included in this systematic review. Information regarding the relationship between MF and individual factors, mandibular movements, impression-taking and fixed rehabilitations were obtained. Conclusions – The studies included in this systematic review showed that MF is greater during protrusive movements, in the posterior areas of the lower jaw, and in patients with brachial facial type, greater jaw length, small gonial angle and less density, length and bone surface of the symphysis. The biomechanical effects of mandibular flexion on fixed restorations are debated. Prospective clinical and radiological observational studies should be conducted to evaluate the potential short-, medium- and long-term consequences of MF.

Zirconia-reinforced lithium silicate (ZLS) is utilized as a material for prosthetic tooth crowns, offering enhanced strength compared to other dental glass-ceramics. In this study, we investigate a commercial ZLS material, provided in a fully crystallized form. We examine the effects of an optional post-processing heat treatment on micro-contact damage using controlled indentation tests simulating the primary modes of contact during chewing: axial and sliding. Our findings indicate that the heat treatment does not affect mechanical properties such as the elastic modulus, hardness and indentation fracture toughness. However, it does enhance the resistance to contact damage by fracture and chipping in both axial and sliding modes, as well as the resistance to crack initiation measured from sliding tests. This improvement is attributed to the refinement of the flaw population achieved through the heat treatment. The results are analysed within the framework of contact and fracture mechanics, and the implications for prosthetic dentistry are briefly discussed.

(1) Background: Tooth extraction is one of the oldest and most well-known surgical procedures in dental medicine. It is still routinely performed to date by both general practitioners, oral surgeons, and dental undergraduates. The Benex extraction system allows for the extraction of teeth in vertical direction, which avoids most trauma against the surrounding alveolar bone and soft tissues; (2) Methods: The study included 56 patients who were recruited from the department of Oral Surgery at the Faculty of Dental Medicine, Medical University – Plovdiv. Patients were divided into two groups of 28 patients – Group I (control group) and Group II (study group). For each group the success of the extraction, buccal cortical plate preservation, pain experience and early wound healing were assessed; (3) Results: There was no statistical significance between the success of the extractions in both groups. The Benex extractions preserved the buccal cortical plate in 95% of the cases, whereas the forceps extractions only in 71.8%, which shows a statistical significance. On the seventh day patients in group II reported less pain, without a significant difference. There was a significantly bigger number of completely healed extraction wounds on the 10th day; (4) Conclusions: Atraumatic extractions allow for more hard and soft tissues to be preserved in the extraction site. This is all crucial for the successful outcome and aesthetically pleasing results of a following prosthetic or implant restoration.

Hybrid materials are a recent addition in the field of Restorative Dentistry for computer-assisted design/ computer-assisted manufacturing (CAD/CAM) indirect restorations. The long–term clinical success of modern dental restorative materials follows a multifactorial pattern. Among the characteristics, affecting the longevity of a restoration, mechanical properties and physicο – chemical interactions are of utmost importance. While numerous researchers constantly evaluate the mechanical properties, the biological background of resin–based CAD/CAM biomaterials is scarcely investigated and, therefore, less described in the literature. This review aims to analyze the biofilm formation on the surfaces of novel hybrid, resin–based CAD/CAM materials and evaluate the methodological protocols followed to assess microbial growth. It is demonstrated that the surface structure, the composition and the finishing and polishing procedures on the surface of a dental restorative material influence the initial bacterial adhesion; however most studies focus on in vitro protocols, whereas in vivo and/or in situ research of microbiomics in CAD/CAM restorative materials is lacking, obstructing in that manner the accurate understanding of the bioadhesion phenomenon in the oral cavity.

Abstract: This study aimed to evaluate the long-term impact of paediatric dentistry programmes on children and adolescents to reduce oral health inequalities. It measures and assesses the improvement effects of paediatric dentistry programmes on the oral health of children and adolescents as part of the efforts to decrease oral health disparities in this age group. It included 406 individuals who participated in student and paediatric dentistry programmes between 2013 and 2019 at screening facilities in Gwangjin-gu, Seoul. Frequency analysis was conducted for demographic characteristics, and binary logistic regression analysis was performed to identify factors influencing the prevalence of dental caries as the dependent variable. Data were analysed using PASW Statistics with the statistical significance level set at α=0.05. Regarding oral health indicators based on the frequency of participation in paediatric dentistry programmes for children and adolescents, participants with seven or more sessions had lower prevalence rates of dental caries, malocclusion, and periodontal disease than those with only one session. Second, when comparing oral health indicators in paediatric dentistry programmes between primary and adolescent age groups, individuals under continuous management showed a decrease in permanent teeth affected by dental caries, dental caries prevalence, and malocclusion prevalence (excluding primary school age). Third, binary logistic regression analysis revealed significant influences (p

Background: Restorative materials might significantly affect load transmission at peri-implant bone. The aim of the present study is to evaluate the shock absorption capacity of two different polymeric materials to be used as frameworks for implant-supported prostheses. Methods: A masticatory robot was used to compare the shock absorption capacity of polyether-ketoneketone (PEKK) Pekkton®ivory (Cendres+Mètaux) and glass fiber-reinforced composite (GFRC) TRINIATM (Bicon). Five identical sample crowns for each of the materials was tested un-der the same conditions described in previously published papers (Menini et al. 2013). Forces transmitted at the simulated periimplant bone were recorded and statistically analysed. Results: The statistical analysis of forces transmitted at the simulated dental implant revealed significant differences between all the materials tested and significant differences with the mate-rials tested in a previously published paper (Menini et al. 2013: zirconia, glass ceramic, composite resin, acrylic resin). Only differences between PEKK and veneered PEKK and between PEKK and one of the previously tested composite resins were not statistically significant. PEKK samples demonstrated significantly greater shock absorption capacity compared to GFRC. Conclusions: PEKK revealed optimal shock absorption capacity. Further studies are needed to evaluate its efficacy in case of long span prostheses with reduced prosthetic volume.

High insertion torques increase the primary stability of dental implants, which might be beneficial for immediate loading protocols, but may lead to local ischemia and necrosis of the bone-implant interface. This study compared the outcomes of implants placed with low (<45Ncm), conventional(45-70Ncm), and high (≥75Ncm) insertion torques in All-on-4 concept cases with up to 2-year follow-up. Patients included in this study presented edentulous or partially dentate arches with an indication for full-arch rehabilitation. Implants were installed following the All on four protocol and were divided into 3 groups: Low, Conventional, and High torque, and were followed periodically for 2 years with ISQ measurements. The results showed no significant differences in success rates between the three groups. This suggests that high insertion torques may maintain higher primary stability values for immediately loaded implants during the healing period. Further studies are necessary to confirm these findings.

Creating environmentally sustainable oral healthcare culture requires embedding contents in dental curriculum. This study aimed to explore the current knowledge and drivers among dental students and educators regarding environmentally sustainable dentistry (ESD) in the United Arab Emirates (UAE) and identify barriers and enablers to embrace it. A cross-sectional survey using online questionnaire was carried out in undergraduate dental educational institutes. Data analysis included descriptive statistics and thematic analysis. Most students and educators were not aware of ESD content in their curriculum. However, the majority of educators were familiar with ESD concept, while students were mostly unfamiliar. Nonetheless, students largely agreed on its im-portance and their interest in learning it, as they view it relevant to their future practice. Educators agreed that the dental profession has a responsibility to be environmentally friendly and expressed desire in introducing ESD content into the curricula. Several barriers were reported such as lack of knowledge, curriculum space, educational resources, and time. Meanwhile, enablers included providing training and resources. There is no explicit presence of ESD content in the dental curricula. Regardless of the lack of in-depth knowledge among educators and more so with students, they both have positive views toward incorporating ESD into dental curricula.

Age estimation is an important tool when dealing with human remains or undocumented minors. Although the skull, the skeleton or the hand-wrist are used on age estimation as maturity indicators, they often present lack of good conditions for a correct identification or estimation. Few systematic reviews (SRs) have been recently published; therefore, this umbrella review critically assesses their level of evidence and provides a general comprehensive view. An electronic database search was conducted in four databases (PubMed, Cochrane, WoS, LILACS) up to December 2022, focusing on SRs of age estimation through forensic dentistry procedures. The methodological quality was analyzed using the measurement tool to assess SRs criteria (AMSTAR2). Eighteen SRs were included, five of critically low quality, six of low quality, three of moderate quality and four of high quality. The SRs posited that Willems’ method is more accurate and less prone to overestimation; most methods seem to be geographically sensitive; and 3D-Imaging and artificial intelligence tools demonstrate high potential. The quality of evidence on age estimation using dental approaches was rated as low to moderate. Well-designed clinical trials and high standard systematic reviews are essential to corroborate the accuracy of the different procedures of age estimation in forensic dentistry.

Today, dental implantology is a reliable technique for the treatment of partial and total edentulism. The fixing of dentures on dental implants can be achieved by a number of different techniques. The choice of technique depends on the specific needs of the patient, the condition of the jawbone and the design of the prosthesis itself. Currently, the two most common types of prosthetic abutment connections are cemented or screwed connections, both of which have disadvantages and ad-vantages. The aim of this study is to analyze, with Finite Element Analysis (FEA), a new Cone Morse connection system between the prosthesis and implant. The connection retention has been analyzed by adopting three different approaches: analytical, in vitro and the FEA method. The systems formed by abutment, healing-cap, and crown with three different inclination conditions were modeled in 3D: 0°, 15° and 30°. With Ansys finite element software, the effect of tilt on system retention was studied. The FEA analysis showed comparable results with in vitro studies regarding the retention strength for an abutment-cap system with a taper of 4°, obtaining 66.6 N compared to 68 N calculated through an in vitro study. The inclination of the abutment affects the retention of the system because the hole made on the surface of the abutment, decreases the contact area between the components. The Cone Morse prosthesis implant connection system is the most stable and efficient system compared to the threaded or cemented system. Retention is influenced by factors such as abutment conicity, insertion strength and the contact surface be-tween components.

Microbiological control of dental pathologies presents a significant clinical challenge for dental surgeons, particularly considering drug-resistant microorganisms. To address this issue, Antimi-crobial Photodynamic Therapy (PDT) has emerged as an effective and complementary technique for microbial reduction. This therapy involves the application of a photosensitizer dye (PS) either topically or systemically, followed by exposure to low-power lasers with appropriate visible light wavelengths. PDT has found a valuable place in dentistry across various specialties, including surgery, periodontics, endodontics, dentistry, implantology, orthodontics, and pediatrics. In the realm of pediatric dentistry, managing microorganisms during dental treatments has become a major challenge.This article reviews the evidence supporting the potential of photodynamic therapy in combating bacteria, fungi, and viruses, with a particular focus on areas such as endodontics, restoration in deciduous teeth, implantology, and periodontics for bacterial control. Additionally, PDT has shown promise in stomatology, specifically in the treatment of mucositis and herpes. Considering its promising results and ease of application, photodynamic therapy presents an in-teresting alternative for clinical practice. However, it is important to note that specific protocols must be followed for each application, encompassing the type of photosensitizer, concentration, pre-irradiation time, light type, wavelength, energy, power, and mode of light delivery. Researchers have been steadily refining these protocols to facilitate PDT's integration into clinical practice.

Background: Bleeding disorders can be divided into three categories: congenital coagulation disorders (CCDs), antiplatelet induced bleeding disorders (APBDs) and anticoagulant induced bleeding disorders (ACBDs). Implant placement can be challenging in this kind of patients. The aim of this study is to provide evidence on implant surgery in patient with bleeding disorders and to generate some practical recommendations for clinicians. Material & Methods: Pubmed/MEDLINE, Scopus, Web of Science and Cochrane Library databases were screened. The latest search was performed in July 2022. Case Reports, Case Series, Cohort Studies, Cross-Sectional Studies, Case Control Studies, Reviews, Consensus Reports, Surveys and Animal Studies were included in the analysis. Results: Seventeen articles on CCDs were found, fourteen on APBDs, twenty-six on ACBDs. Most of these articles were case report or case series. Patients with CCDs can be treated after the infusion of the missing coagulation factor. Patients with APBDs can be treated without withdrawing the therapy. Patients with ACBDs should be treated depending on the anti-coagulative medication. Conclusion: Despite the low level of evidence, dental implants can be safely placed in patients with bleeding disorders. However, careful preoperative evaluation and the adoption of local and post-operative bleeding control measures are mandatory.

We sought to evaluate the effects of non-surgical periodontal treatment (NSPT) on periodontal clinical parameters, systemic blood pressure (BP) and plasma levels of systemic inflammation markers in patients with combined refractory arterial hypertension (RAH) and stage III grade B periodontitis. Twenty-seven participants with RAH and periodontitis received NSPT. The analyzed clinical parameters were probing depth (PD), clinical attachment level (CAL), bleeding on probing (BOP), and plaque index (PI). An assessment was performed for systemic BP, complete blood count, coagulogram, creatinine measurement, C-reactive protein (CRP), glycated hemoglobin, cholesterol, glutamic oxaloacetic transaminase, glutamate pyruvic transaminase, waist-hip ratio, and body mass index. In the follow-up period, twenty-two patients were evaluated at baseline and after 90 and 180 days. The data were submitted to statistical analysis (α=0.05%). As expected, the clinical results showed a significant improvement in the percentages of PI, BOP, PD and CAL, which were statistically significant at 90 and 180 days (p<0.0001). Importantly, NSPT significantly reduced the blood level of CRP (p<0.02). However, no significant reduction in BP parameters was noted in the evaluated follow-up periods. NSPT, despite the benefits in periodontal clinical parameters, reduced the plasma level of CRP but not the BP in patients with combined RAH and periodontitis.

The purpose of the study was to evaluate the success of procedural conscious sedation, using inhaled equimolar nitrous oxide-oxygen (NOIS – EMONO), in patients undergoing routine dental and oral surgery procedures in a Swiss university hospital setting. Materials and methods: The authors conducted a retrospective cohort study of patients that underwent NOIS-supported procedures between 2018 and 2022 at the oral surgery department of the University Hospital of Geneva (HUG), Switzerland. The primary outcome was the measurement of the procedure success and efficacy as defined by the European Society of Anesthesiology. Secondary objectives included the analysis of the types of treatments performed, their indications, patient behavior, and the patient - clinician satisfaction score. Results: 55 patients were included in the study, 85% underwent surgical procedures, the remaining 15% underwent restorative and preventive procedures. The overall treatment success rate was 98.2%, and 97.9% for surgically treated patients. 62% of patients appeared relaxed, calm, and serene, while 16% expressed pain or fear during the procedure. Infiltrative administration of local anesthesia caused stress in 22% of patients, this was significantly lower in sub cohorts who received local topical anesthetics (0%) or a combination of systemic and local topical analgesics (7%). Patients (75%) and clinicians (91%) were satisfied with the procedure. Conclusion: Inhaled equimolar nitrous oxide-oxygen procedural sedation used during dental procedures and oral surgery results in high treatment success and satisfaction rates. The administration of additional topical anesthetics helps reduce the anxiety and stress related to infiltrative anesthesia. Further dedicated studies and prospective trials are needed to confirm these findings.

IntroductionDiversity is known to be important but diversity of staff working in dental schools in the UK and Ireland is low in comparison with the dental profession and the overall population. AimsTo provide a detailed snapshot of the diversity of dental academic staff in 2021 including staff working in academic and clinical roles.MethodsAn online survey was circulated to dental schools by Dental Schools Council. Questions included dates of graduation and key career milestones, demographics and indicators of esteem. Free text questions were also included.ResultsThere was a high degree of variability in dental academic careers which made direct comparisons difficult. Neither gender nor race appeared to be associated with a faster career progression. Females and those of racialised minority were less represented at the most senior grades. For those who had completed specialty training, racialised minority staff were far less likely to be working at consultant grade than their White equivalents.ConclusionThere are differences in career progression between staff in dental schools. The high amount of individual variability makes these difficult to quantify except at the most senior positions. Qualitative information is needed to contextualise the results and provide additional information.

Periodontal disease is one of the most common conditions affecting dogs worldwide and is reported to be particularly prevalent in racing greyhounds. A range of potential risk factors have been hypothesised. Previous research has suggested, regular tooth brushing can reduce both calculus and gingivitis, but the frequency required is unclear. Here, we report a controlled blinded in-situ in which kennel staff brushed 160 racing greyhounds’ teeth (living at six kennel establishments), either weekly, daily or never over two-month period. All visible teeth were scored for calculus and gingivitis, using previously validated scales. We calculated average scores for each of three teeth groups and overall averaging the teeth groups. Changes were compared to baseline. After two months, the total calculus scores (controlling for baseline) were significantly different in the three treatemnet groups, (F(2,129) = 10.76, p<0.001) with both weekly and daily brushing resulting in significant reductions. Gingivitis was also significantly different (F(2,128) = 4.57, p=0.012), but in this case, only daily brushing resulted in a significant reduction. Although dogs in different kennels varied significantly in their levels of both calculus (F(5,129) =8.64, p<0.001), and gingivitis (F(5,128)=3.51 p=0.005), the intervention was generally similarly effective in all establishments. Teeth groups varied and incisors were not significantly affected by treatment. Since trainers implementing the routine, reported minimal time commitment and positive experiences, we suggest that daily brushing is recommended for racing greyhounds, and that demonstrations should include attention to all teeth groups including incisors. Similar trials need to be conducted with retired greyhounds since these have been shown to present particularly high levels of periodontal disease.

Background Bangladesh has been attracting international students on various subjects in recent times. Every year students from different parts of the world come to study undergraduate and postgraduate courses, mostly at private universities in Bangladesh. This study evaluates the depression status among international students who are studying dentistry in Bangladesh. Methods This cross-sectional survey was conducted among International undergraduate dental students who enrolled in the Bachelor of Dental Surgery program in nine public and private dental colleges in Bangladesh. A total of 206 students completed the survey, and CES-D 10 items Likert scale questionnaire was used for data collection. The Cronbach alpha for CES-D 10 scale items for this population is 0.812. Results The majority of the students (79.5%) are below 24 years of age, and students who cannot communicate well in Bengali (Bangla), about 60% of them have experienced depression. About 77.3% (p< 0.00) of the international students having financial difficulties exhibited depression. The international students who went through financial problems were two times more likely to suffer from depression (OR=2.38; p-value <0.01). Conclusion This study tried to highlight the struggles faced by international students in Bangladesh studying dentistry. It is evident from the findings that several factors influence students' mental well-being during demanding dental education years.

ABSTRACT: Aims: This study aimed to explore the impacts of neighborhood-level socioeconomic contexts (e.g., income, education) on the therapeutic and preventative dental quality outcome of children aged 3 to 15 years. Materials and Methods Anonymized billing data of 842 patients reporting to a university Children’s Dental over three years met the inclusion criteria. Their access to care (OEV-CH-A), topical fluoride application (TFL-CH-A) and dental treatment burden (TRT-CH-A) were determined by dental quality alliance (DQA) criteria. The three oral health variables were aggregated at a neighborhood-level and analyzed with census data provided by Statistics Canada within a GIS framework. The forward sortation area (FSA) was chosen as a neighborhood spatial unit and regression models were run both the individual and neighborhood level. Results: The individual-level regression models showed significant negative associations between OEV-CH-A (p=0.027) and TFL-CH-A (p=0.001) and the cost of dental care. There was a significant negative association between TRT-CH-A and median household income. Neighborhood-level Ordinary Least Squares (OLS) linear regression models show negative associations of all three dental health variables (OEV-CH-A, TFL-CH-A, TRT-CH-A) with median household income and the number of households without a college degree. Conclusion: GIS and spatial quantitative approaches may be an effective tool to explore the impacts of socioeconomic variables on oral health outcomes.

It is currently recognized that an injudicious strategy in the last decades has been not only focusing of research typically on caries in children, but also the narrow focusing on fluoride, because despite sufficient availability of fluoride in water and oral healthcare products, caries levels escalate steadily as people get older and caries remain a main public health issue to be settled. In the last two decades the scientific community intensified efforts of exploring other products for caries prevention, herbal products being one of these approaches. Because preliminary evidence indicated that clinical trials for caries prevention with herbal products are heterogeneous in design, quality and products evaluated, we performed a scoping review intended to explore the main characteristics of such clinical trials. From an initial collection of 1986 unique papers from different literature databases, 56 articles satisfied the inclusion and exclusion criteria. The species investigated, dosage forms, study designs, duration of intervention, controls, endpoints, quality of reporting and risk of bias are discussed. 85.71% of the trials reviewed here reported positive results but given the methodological flaws and biases affecting them, it is difficult to conclude on the efficacy of those products based on the studies published thus far.

This study evaluates inequalities in the use of dental services according to place of birth before and after the economic crisis in Spain. A cross-sectional study was performed in the population aged 18 to 65 years in Spain. We used data from three Spanish National Health Surveys for years 2006 (before the crisis), 2014 and 2017 (after the crisis). Log-binomial regression was used to quantify the association between region of origin and use of dental care services before and after controlling for the selected covariates. In 2006, we found a greater probability of not using dental care services in immigrants from Asia (PR:1.36, 95% CI:1.10–1.67) and Africa (PR:1.16; 95% CI:1.05–1.28) compared to the natives. For 2014, the probability of not using dental care services was greater for all immigrants compared to the natives, with the greatest odds for those from Africa (PR:1.71; 95% CI:1.46–2.01) and Asia (PR:1.3; 95% CI:1.23–1. 47). The associations for 2017 were weaker in magnitude than the ones observed for 2014, although stronger than for 2006. This study suggests that the economic recovery did not have the same impact for natives and immigrants regardless of regions of origin, given the observed inequalities in use of dental services.

Anterior-tooth (ANT) contacts induce short latency reflex inhibition of human jaw-closing muscles. The jaw is a rigid class 1 lever for pinpoint-targeting muscle force into a single bite-point, the pivoting food particle. See-saw reflex movements around the food particle fulcrum multiply the food-crushing force. Unpredictable jolts of reaction force caused by food-crushing are subjected to the rostral ANT and caudally to the two articulate ends of the jaw triangle. Compression/distraction strains of food-crushing must be monitored and inhibited by withdrawal reflexes. The mesencephalic ganglion (Vmes), neural myelin sheath, and muscle stretch receptors evolved subsequently to the advent of jaws to improve the velocity of proprioceptive and withdrawal reflexes. In mammalians, the spindles of the taut motor units, stretched by the food-fulcrum send excitatory monosynaptic feedback for the efferent neurons of the respective ipsilateral muscle units, via Vmes. In the Vmes, the spindle-input-mediating afferent neurons are coupled with another source of afferent feedback, which is also excitatory, from the back-tooth (BAT) mechanoreceptors. The two sources of excitatory pulses are summated and targeted for the efferent neurons to boost the stretched and taut motor units. Likewise, the afferent feedback from ANT mechanoreceptors is also coupled in the Vmes with concomitant feedback from spindles. The ANT output, however, is inhibitory to negate the excitatory feedback from the stretched jaw-muscle units. The inhibitory feed from ANT temporarily blocks the excitatory potential of masticatory motor efferent neurons to protect the ANT and jaw-joints from inadvertent strains. The inhibitory inputs from ANT alternate with the excitatory inputs from BAT to determine which jaw-closing muscle units are activated or inhibited at any given instant of food-crushing. The Vmes exists in all jawed vertebrates, and its’ evolution was probably motivated by demands for the control of bite force. The monosynaptic unilateral food-crushing excitatory and inhibitory reflexes (UFCR) override the coexisting bilaterally executed feed for jaw muscles from the central nervous system. Hypothesis: The Vmes-mediated UFCR combine neural inputs from tooth contacts with concomitant feedback from muscle stretch receptors for the control of mammalian food-crushing bite force.

Objective: Determine the feasibility of utilizing longitudinal electronic dental record (EDR) data to track change over time in patient periodontal disease (PD) and to generate three patient cohorts: 1) patients whose disease did not change over time, 2) patients whose PD progressed, and 3) patients whose disease improved over time using informatics approaches. Methods: We conducted a retrospective study of 28,908 patients who received a comprehensive oral evaluation between January 1, 2009, and December 31, 2014, at the Indiana University School of Dentistry (IUSD) clinics. We developed and tested three automated computer applications to: 1) diagnose periodontitis cases from periodontal charting, 2) retrieve clinician-documented diagnoses from clinical notes, and 3) track disease change over time. We also evaluated the density of longi-tudinal EDR data for the following follow-up times: 1) none, 2) up to 5 years, 3) >5 and <=10 years, and 4) >10 and <=15 years Results: Thirty-four percent (n=9,954) of the study cohort had up to five years of follow-up visits with an average of 2.78 visits with periodontal charting information. An average of three patient visits per year that contained periodontal charts (63,552) were utilized to obtain a diagnosis, which is considered excellent. For clinician-documented diagnoses from clinical notes, 42% of patients (n=5,562) had at least two PD diagnoses to determine their disease change. In this cohort with cli-nician-documented diagnoses, 72% percent of patients (n=3,919) did not have a disease status change between their first and last visits, 669 (13%) patients' disease status progressed, and 589 (11%) patients’ disease improved. Conclusions: This study demonstrated the feasibility of utilizing longitudinal EDR data to track disease changes over 15 years during the observation study period. We found excellent longitudinal data when diagnoses generated from periodontal charting were considered (three visits per pa-tient). This information can be now utilized for studying the clinical course of periodontitis.

Enophthalmos is a severe complication of primary reconstruction following orbital floor frac-tures, oncological resections or maxillo-facial syndromes. The goal of secondary reconstruction is to re-store symmetrical globe positions to recover function and aesthetics. In this article we pre-sent a method of computer-assisted orbital floor reconstruction using a mirroring technique and a customized titanium or high-density polyethylene mesh, printed using computer aided manufac-turing techniques. This reconstructive protocol involves 4 steps: mirroring of the healthy orbit at the affected site, vir-tual design of a patient specific orbital floor mesh, computer-assisted manufacturing (CAD) of the implant, and surgical insertion of the device. Using a computed tomography data set, the un-injured side of the craniofacial skeleton was reflected onto the contralateral injured side, and a reconstructive orbital floor prosthesis was virtually designed on the mirrored orbital bone sur-face. The solid-to-layer (.STL) files of the prosthesis were then manufactured using Direct Metal Laser Sintering (DMLS) or Computer Numerical Control (CNC) methods, leading to the produc-tion of 10 titanium meshes and 2 high density polyethylene (HDPE) implants. Clinical outcomes were assessed using 3dMD photogrammetry and computed tomography measures in 14 treated patients. The technique described here appears to be a viable method to correct complex orbital floor de-fects needing delayed reconstruction. This article represents the prosecution of a previous study, which is part of a wider experimental protocol for orbital floor reconstruction using comput-er-assisted design-computer-assisted manufacturing (CAD-CAM) technology

This review article deals with the design of bioactive calcium phosphate coatings deposited on metallic substrates to produce bone implants. The bioceramic coating properties are used to create a strong bonding between the bone implants and the surrounding bone tissue. They provide a fast response after implantation and increase the lifespan of the implant in the body environment. The first part of the article describes the different compounds belonging to the calcium phosphate family and their main properties for applications in biomaterials science. The calcium to phosphorus atomic ratio (Ca/P)at. and the solubility (Ks) of these compounds define their behavior in a physiological environment. Hydroxyapatite is the gold standard among calcium phosphate materials, but other chemical compositions/stoichiometries have also been studied for their interesting properties. The second part reviews the most usual deposition processes to produce bioactive calcium phosphate coatings for bone implant applications. Plasma spraying is the main industrial process, but magnetron sputtering, pulsed laser deposition, electrospray deposition, electrophoretic deposition, and electrodeposition are also widely studied in academic and industrial research. The last part describes the main physicochemical properties of calcium phosphate coatings and their impact on the bioactivity of bone implants in a physiological environment.

The goal was to assess dental students' perception of digital technologies after participating in a CAD/CAM exercise for scanning, designing, and manufacturing computer-aided provisional fixed dental restorations. A survey was conducted among second-year dental students (pre-D2 and post-D2), first- (D1, negative control), third-, and fourth-year dental students (D3 and D4, positive controls). Only OSU College of Dentistry students who completed the activity and completed the surveys were included. Seven questions were rated, which evaluated changes in knowledge, skill, interest, the importance of technology availability in an office, patients' perception of technology, the importance of having the technology, and the expected frequency of clinics utilizing the technology. Statistical analysis was performed with a significance level of 0.05. A total of 74 pre-D2 and 77 post-D2 questionnaires were completed. Additionally, 63 D1, 43 D3, and 39 D4 responded to the survey. Significant differences were found for "knowledge" and "skill" between pre-D2 and post-D2, and pre-D2 and control groups (p<0.001). There was a significant difference between post-D2 and all controls for “interest” (p=0.0127) and on practice preference for technology availability (p<0.05). There were significant results between post-D2 and all controls regarding the importance of technology availability in an office (p<0.001) and the expected frequency of clinics utilizing the technology (p=0.01). No significance was found for "patient's value of technology" and "the importance of having the technology". The presence of technology in the practice and educational academic environments significantly improved students’ interest and perception of knowledge and skill.

(1) Background: The compound ytterbium trifluoride is used as a component of several dental materials, and this is reviewed in the current article. (2) Methods: Published articles on this substance were identified from PubMed, and showed that it has been included in a variety of dental restorative materials, including composite resins, glass polyalkenoate cements and calcium trisilicate cements. (3) Results: Ytterbium trifluoride is reported to be insoluble in water. Despite this, its presence is associated with fluoride release from dental materials. There is evidence that it reacts with the components of calcium trisilicate cements to form small amounts of a variety of compounds, including ytterbium oxide, Yb2O3, and calcium-ytterbium fluoride, CaYbF5. In nanoparticulate form, it has been shown to reinforce glass polyalkenoates and it also provides high contrast in X-ray images. (4) Conclusions: Ytterbium trifluoride is a useful component of dental materials, though some of the published findings suggest that there are aspects of its chemistry which are poorly understood.

Background and objective: Research shows that 60–90% of school children have caries, representing a serious public health issue. Here, we present a model of oral health promotion that has been conducted in the Primorje-Gorski Kotar County (PGC), Croatia, from 2008 to 2019. We assessed the oral status of first and fifth grade elementary students and determined the sustainability and influence of our model on the status and behavior regarding the children’s oral status. Additionally, during the observed period, promotional and preventative activities aiming to improve oral health were conducted. Since 2014, the Program has begun to be continuously, comprehensively, and systematically introduced into preschools as well. Material and methods: We assessed the number of children with caries by analyzing the changes in the decayed, missing, and filled teeth for primary teeth (dmft)/decayed, missing, and filled teeth for permanent teeth (DMFT) index mean during the observed period. Results: From 2008 to 2019 we assessed 44422 children in the PGC (21714 first grade and 22708 fifth grade students). The average response rate throughout the Program has been 83%. We have noted a dmft/DMFT index decrease from 4,66 to 3,73 (first graders) and from 2,50 to 1,00 (fifth graders). Conclusions: The Program has improved the behavior and oral health of children; stakeholders from various professions have been included, such as health visitors, school medicine teams, and pediatricians, avoiding additional financial expenses, increasing the number of children in care, and proving the sustainability of our oral health improvement model.

The odontogenic cysts can lead to a bone destruction that can hamper the dental implant place-ment in the ideal 3D position. Different biomaterials and techniques that allow bone regeneration are described in the literature, each with its advantages and disadvantages. This clinical case with 18 months of follow-up shows the enucleation of an odontogenic cyst fol-lowing the guide bone regeneration with fence technique. After 6 months 2, dental implants were placed at the region of tooth 11 and 21, being rehabilitated nine weeks after. The fence technique allowed the recovery of the bone morphology and the placement of the dental implants in the 3D ideal position.

Oral health surveys are essential to assess the dental caries experience and to influence national policies. This retrospective cross-sectional study aims to analysis dental caries experience who sought dental treatment in a reference university dental hospital at the Lisbon Metropolitan Area between January 2016 and March 2020. Full-mouth examination, sociodemographic, behaviors and medical information were included. Descriptive analyses and logistic regression analysis were applied to ascertain risk indicators associated with dental caries experience. A final sample of 9,349 participants (5,592 females/3,757 males) were included, aged 18 to 99 years old. In this population, caries experience was 91.1%, higher in female participants. Age (OR= 1.01, 95% CI [1.00-1.02], occupation (OR= 2.94, 95% CI [2.37-3.65], OR= 3.35, 95% CI [2.40-4.67], OR= 2.55, 95% CI [1.66-3.91], for employed, unemployed and retired, respectively), overweight (OR= 1.52, 95% CI [1.18-1.96]), reporting to never visited a dentist (OR= 0.38, 95% CI [0.23-0.64] and self-reported week teeth status (OR= 2.14, 95% CI [1.40-3.28]) were identified as risk indicators for the presence of dental caries, according to adjusted multivariable logistic analyses. These results highlight a substantial rate of dental experience in a Portuguese cohort and will pave the way for future tailored oral public health programs in Portugal.

SCARED-C instrument (the child version, 41 items) is used for screening anxiety in children between 8 to 18 years old and has been first introduced by Birmaher & collab. in 1995, with good psychometric data - internal consistency from α =.74 to .93 - and good discriminative validity indices in the original versions (1997, 1999). Since then, many countries have adopted the scale, for its utility in identifying five subsets of anxiety disorders (subscales): somatic/panic disorder, generalized anxiety, separation anxiety, social phobia, and school avoidance. The present study contains the first Romanian translated and adapted version of the SCARED-C instrument on a community sample of 477 children (8-18 years old) from Mureș county schools. The instrument showed moderate to good internal consistency (α Cronbach from to .63 to .91 for the total scale) and good test-retest reliability (.70) on a subset of 85 children sample. A confirmatory factorial analysis (CFA) was conducted to test the factor structure of the Romanian version of SCARED-C; results showed that SCARED-C has good psychometric properties to be used for screening anxiety in Romanian children and adolescents. The implications for using SCARED-C in dental practice are discussed. Future studies need to be conducted for exploring convergent and discriminative validity of the instrument and the sensitivity to current DSM-V criteria. Application on a dental pediatric sample is also required.

The clinical application of Phentolamine Mesylate (PM) as an anaesthetic reversal agent has been documented in paediatric patients and in conservative dentistry, but no studies have been found in implant surgery. A prospective randomised study was conducted in 60 patients eligible for mandibular implant treatment, randomly divided between the Control Group (CG) and Experimental Group (EG), who were administered PM. Haemodynamic changes, adverse effects and patient satisfaction were assessed. No statistically significant differences in haemodynamic changes and postoperative pain were found between CG and EG (p&lt;0.05), except for Systolic Blood Pressure (SBP) which increased slightly in EG, without posing a risk to the patient. There were no differences in the presence of adverse effects between the two groups, except in the CG which presented greater difficulty in chewing and biting (p&lt;0.05) and the EG with greater pain in the injection area (p=0.043). 83.3% of the EG patients would request PM again for future dental treatment. The use of PM offers an alternative in implant surgery, without increasing the risks and increasing the patient's quality of life.

Cranio-maxillofacial structure is a region of particular interest in the field of regenerative medicine due to both its anatomical complexity and the numerous abnormalities affecting this area. However, this anatomical complexity is what makes possible the coexistence of different microbial ecosystems in the oral cavity and the maxillofacial region, contributing to the increased risk of bacterial infections. In this regard, different materials have been used for their application in this field. These materials can be obtained from natural and renewable feedstocks or by synthetic routes with desired mechanical properties, biocompatibility and antimicrobial activity. Hence, in this review, we have focused on bio-based polymers, which by their own nature, by chemical modifications of their structure, or by their combination with other elements, provide a useful antibacterial activity as well as the suitable conditions for cranio-maxillofacial tissue regeneration. This approach has not been reviewed previously, and we have specifically arranged the content of this article according to the resulting material and its corresponding application, reviewing guided bone regeneration membranes; bone cements; and devices and scaffolds for both soft and hard maxillofacial tissue regeneration, including hybrid scaffolds, dental implants, hydrogels and composites.

Dental services are significantly impacted by the COVID-19 pandemic. Almost all dental procedures carry a high infection risk for providers and patients due to spread of aerosols. As a consequence, national public health agencies, and dental professional associations have issued guidelines for enhanced infection control, personal protection equipment and limiting care to urgent or emergency services. However, there is no dental service concept for disaster preparedness or response that might be applied. Similarly, pathways to care provision in a post-pandemic future are missing. We propose Safe Aerosol-free, Emergent Dentistry (SAFE Dentistry) as one approach to dental services during and emerging from pandemics. The concept’s starting point is the identification of the most common patient needs. The next step is to replace common treatments relating to the most common needs with alternative interventions with less infection risk because they do not generate aerosols. SAFE Dentistry is innovative, safe, and responds to the requirements of a pandemic and post-pandemic emergence where the risk of disease transmission remains high. SAFE Dentistry thereby ensures continuity of dental services while protecting providers and patients from infectious pathogens. Moreover, SAFE Dentistry allows dental service providers to remain operational and generate income even under pandemic conditions. Implementation and policy options for SAFE Dentistry include universal availability without co-payments by patients and a uniform bundled payment scheme for providers to simplify budgeting, reimbursement and to provide easier administration during a pandemic. Adaptations and adjustments of the concept are possible and encouraged, as long as the principle of avoiding aerosol-generation is maintained.

Consumption of refined foods and beverages high in sugar make the teeth susceptible to the formation of biofilm, and lead to dental caries and diseases of the oral cavity such as periodontitis and periodontal disease. The aim of the present study was to determine the ability of selected probiotics to inhibit growth and biofilm formation by the cariogenic bacterium Streptococcus mutans in vitro. We screened strains of latic acid bacteria (LAB) (n=120) from the Bioresources Collection and Research Center (BCRC), saliva of healthy adults and infant stool. The antimicrobial activity of LAB in vitro was evaluated by agar spot culture and co-culture of the S. mutans strains. We determined the effect of heating and dilution factors (2- and 4-fold) on the antagonistic activity of LAB. Antagonistic substances in the spent culture suspensions (SCS) of LAB were precipitated by extraction with ammonium sulphate and chloroform to characterise the protein and lipophilic fractions. Results of co-culturing show that the SCS of the three LAB strains (Lactobacillus pentosus 13-1, 13-4 and Lactobacillus crispatus BCRC 14618) subjected to heat treatment showed significantly high antimicrobial activity. We found that substances produced by L. pentosus 13-4 which have the potential to exhibit antimicrobial properties might be lipophilic proteins. Additionally, we infer that the mechanism of reducing biofilm formation by Lactobacillus strains is associated with sucrose-dependent cell–cell adhesion and the gtfC level of glucosyltransferases (Gtfs) in the biofilm. Native LAB strains screened in our study may be used in chewing gums and other processed foods for preventing tooth decay.

The most common long-term complication of silicone breast implants (SMI) remains capsular fibrosis. The etiology of this exaggerated implant encapsulation is multifactorial but primarily induced by the host response towards the foreign material silicone. Identified risk factors included specific implant topographies. Of note, breast implant-associated anaplastic large cell lymphoma (BIA-ALCL), has only been observed in response to textured surface implants. We hypothesize that reduction of SMI surface roughness causes less host response hence better cosmetic outcome with fewer complications for the patient. A total of 7 patients received the routinely used CPX®4 breast expander (~60 µM Ra) and the novel SmoothSilk® (~ 4 µM Ra), fixed prepectoral with a titanised mesh pocket and randomized to the left or right breast after bilateral prophylactic NSME (nipple-sparing mastectomy). We aimed to compare the postoperative outcome regarding capsule thickness, seroma formation, rippling, implant dislocation as well as comfortability and practicability. Our analysis shows that surface roughness is an influential parameter in controlling fibrotic implant encapsulation. First time intra-individually compared in patients, our data confirm an improved biocompatibility with minor capsule formation around SmoothSilk® implants with an average shell roughness of 4 µM and in addition an amplification of host response by titanised implant pockets.

The majority of contemporary total hip arthroplasty (THA) implants are constructed from Ti-alloys, which are generally believed to generate fewer adverse local tissue reactions (ALTR) compared to CoCr-alloys. This study presents a case of unusual primary THA failure where a substantial release of Ti-alloy debris was observed. A 52-year-old active male underwent THA after posttraumatic aseptic necrosis of the femoral head in 2006. Seventeen years after the procedure, the patient presented with groin pain and restricted range of motion. X-rays revealed protrusion of the alumina ceramic head through the Ti6Al4V acetabular cup. Trace element analysis indicated significantly elevated levels of serum Ti, Al and V. CT and MRI confirmed Ti-alloy cup failure and severe ALTR. During revision surgery, the worn-out ceramic head was in direct contact with the acetabular cup, having protruded through the central hole it created over time. Histological analysis of tissue samples showed wear-induced synovitis with areas of multinucleated foreign-body giant cells and accumulation of numerous metal particles but no acute inflammatory response. Six months after the revision THA, the patient has experienced favourable outcomes. This case provides an instructive illustration for studying the consequences of substantial release of Ti-alloy debris from orthopaedic implants.

Purpose: The objective of the study was to qualitatively assess micro-gap dimensions, connecting fitting surface profile and bacterial leakage of machined and cast high gold alloy UCLA abutments, with or without electrodeposited gold coatings attached to external hexagon implants. Materials and methods: 16 plastic UCLA (PUCLA) and 5 machined cast-to UCLA (GUCLA) abutments were cast with a high gold content alloy. 10 were electrolytically gold plated (8 - PUCLA, 2 - GUCLA). All abutments were attached to implants giving 21 implant-abutment combinations (IACs). External perimeter micro-gaps measured with SEM under different illumination and magnification conditions were averaged over three regions. The IACs were examined for E.coli leakage following an initial sterility test. Disassembled combinations were examined with SEM and surface profiles qualitatively assessed. Results: External micro-gap measurements did not reflect the variable connecting surface profiles but average values < 3.5 μm were observed for all IACs. Bacterial transfer was observed in 3 of 5 PUCLA plated and 2 of 5 PUCLA non-plated IACs. No transfer occurred in the 3 GUCLA non-plated or 2 GUCLA plated IACs. Abutment connecting surfaces, both Au plated and not Au plated, showed plastic deformation (smearing) in variable mosaic patterns across the micro-gap. External micro-gap dimensions although not truly reflective of surface connecting profiles averaged < 3.5 μm measured under shadow eliminating silhouette illumination for both cast and pre-machined external hexagon abutments with and without Au plating. Conclusions: Micro-gap dimensions < 5 μm were obtained with both high noble metal cast and pre-machined external hexagon abutments with and without Au electrodeposited on the abutment connecting surface. Regions of intimate contact due to plastic deformation (smearing) of these surfaces was observed. A continuous smeared region around the circumference of the surfaces can provide an effective barrier to egress of E.coli bacteria from the internal regions of the implant under static loading.

Electric stimulation via a Cochlear Implant (CI) enables people with severe to profound sensorineural hearing loss to regain speech understanding and music appreciation and thus allowing them to actively engage in social life. Three main manufacturers (Cochlear, MED-EL and Advanced Bionics “AB”) have been offering CI systems, thus challenging CI recipients and Otolaryngologists with a difficult decision, as currently no comprehensive overview or meta-analyses on performance outcome following CI implantation is available. The main goal of this scoping review is to provide evidence that data and standardized speech and music performance tests are available for performing such comparisons. To this end, a literature search was conducted to find studies that address speech and music outcomes in CI recipients. From a total of 1592 papers, 188 paper abstracts were analyzed and 147 articles were found suitable for examination of full text. From which, 42 studies were included for synthesis. A total of 16 studies used the consonant-nucleus-consonant (CNC) word recognition test in quiet at 60db SPL. We found that aside from technical comparisons, only very few publications compare speech outcomes across manufacturers of CI systems. Evidence suggests though, that these data are available in large CI centers in Germany and US. Future studies should therefore leverage large data cohorts to perform such comparisons that could provide critical evaluation criteria and assist both CI recipients and Otolaryngologists to make informed performance-based decisions.

Background: The objective of the present study was to evaluate the formation of biofilm in bone patellar tendon bone grafts (BPTB grafts) and to compare it to the formation of biofilm formation in quadrupled hamstring anterior cruciate ligament grafts (4xHt graft). Methods: A descriptive in vitro study was conducted. One 4xHt graft and one BPTB graft were prepared. They were then contaminated with a strain of S. epidermidis. Later, a quantitative analysis was carried out by means of microcalorimetry and sonication with plating. Additionally, a qualitative analysis was carried out by means of electron microscopy. Results: No significant differences were found between the bacterial growth profiles of 4xHt graft and BPTB graft in microcalorimetry and colony counting. In the samples analyzed with electron microscopy, no specific biofilm growth pattern was identified upon comparing BPTB graft to 4xHt graft. Conclusions: There were no significant differences at either the quantitative or qualitative level when comparing bacterial growth in BPTB graft to that in 4xHt graft. Therefore, the presence of sutures in 4xHt graft cannot be established as a predisposing factor for increased biofilm growth in this in vitro study.

Growth-preserving instrumentation techniques are utilized in early-onset scoliosis (EOS) cases requiring surgical intervention. Shilla technique corrects the deformity and may reduce the need for surgical treatment with its growth-directing effect. As with other techniques, various prob-lems can be encountered following the administration of the Shilla technique. The aim of this study was to examine the effect of complications encountered with Shilla treatment on correction and growth. Sixteen patients with a follow-up period of at least 1 year who received Shilla growth guidance for EOS were included in the study. No complications occurred in 50% cases and no unplanned surgery was required. Of the remaining 8 patients with postoperative im-plant-related complications (50%), 6 (37.5%) required unplanned surgery; this consequently caused implant failure in the proximal region in 5 cases (31.25%) and deep tissue infection around the implant in 1 case (6.25%). Deformity correction, spine length, and quality-of-life scores significantly improved in EOS through Shilla growth guidance. Although implant-related com-plications were observed and related unplanned surgeries were required with Shilla growth guidance in our patients, these complications did not have a significant negative effect on correc-tion and spine growth.

The aim of this study was to analyze surgical and refractive outcomes of XEN glaucoma implant (Allergan, an Abbvie company, Irvine, CA, USA), a minimally invasive surgical device for the treatment of refractory glaucoma. A retrospective chart review of eyes that received XEN Gel Stent placement from December 2014 to October 2019 was conducted. Intraocular pressure (IOP) change, best corrected visual acuity (BCVA), change in glaucoma medications, frequency of slit lamp revision procedures, and frequency of secondary glaucoma surgeries were the primary outcomes. Seventy-two subjects were included in the study: 32 (44%) males and 40 (56%) females. The mean follow-up time was 26.87 ± 15.33 months. The mean IOP before surgery was 24.82 ± 8.03 mmHg and decreased to 17.45 ± 5.84 mmHg at the end of the study, MD = -7.48, CI95 [-10.04; -4.93], p < 0.001. The mean decrease from baseline was 23%. Before surgery BCVA was 0.38±0.30 and at the end of the follow-up period it had improved to 0.47±0.37, MD = 0.09, CI95 [0.04; 0.13], p < 0.001. Additional procedures (fluorouracil injection, Bleb needling) were performed in 11/72 patients (15%). Further glaucoma surgery was necessary for 23.9%% of the patients. Implantation of XEN Gel Stent is both safe and effective for lowering IOP in refractory glaucoma patients.

Objective: CAD/CAM generated ceramic implant abutments have recently attracted interest due to their superior customization possibilities and aesthetic advantages. Despite their widespread clinical use, little information is currently available on their surface topography, however. The transmucosal portion of the abutment shoulder is of particular interest, as it ideally supports soft tissue but minimizes mechanical plaque retention. The aim of this in vitro study was to topographically characterize the trans- and subgingival roughness of CAD/CAM zirconia abutments from different manufacturers and compare them with zirconia stock abutments. Material and Method: The surface topography of eight CAD/CAM zirconia implant abutments (tests) and two prefabricated zirconia stock abutments (controls) was determined using focus variation microscopy. Two points on the abutment shoulder were subjected to profilometric examination. 2D and 3D parameters of roughness were obtained and compared. Results: The surface roughness of all the test abutments exceeded the recommended threshold of Ra = 0.2 µm and therefore exhibited an increased risk of mechanical plaque retention. Obvious differences in surface structure were apparent, allowing conclusions to be drawn about the manufacturing method and subsequent reworking processes. Conclusion: Manually reworking the trans- and submucosal area of the investigated CAD/CAM zirconia abutments appears necessary to fulfil the conditions for optimal surface topography. The Sa value as arithmetic mean, taking the maximum height (Sz value) and surface excess (Sdr) into account, is an essential parameter for assessing the surface topography of implant abutments.

Dental agenesis is one of the most common developmental anomaly in humans and it is frequently as-sociated with several other oral abnormalities. The present case describes nonfamilial agenesis of per-manent teeth in a twenty-one-year-old boy, with no apparent systemic abnormalities. The treatment in-cluded a personalized and interdisciplinary approach by the means of endodontics, orthodontics, im-plants supported restorations and prosthetic treatments. The treatment plan was thoroughly elaborated using photographic analysis, study models, orthopantomogram, CBCT and cephalograms. Virtual smile design, diagnostic waxing, and mock-up previsualized the treatment objectives. The edentulous spaces were reconstructed by inserting dental implants, and monolithic Zirconia implant supported restorations. The final results showed a highly aesthetic and functional rehabilitation. Periodic checkups have shown that the stability of the result is well maintained and that the implant supported restorations are an op-timal solution for patients with multiple anodontia.

The present study aimed to characterize the microstructure of a temporary 3D printing resin (Resilab Temp), evaluating the optical properties and mechanical behavior according to different post-processing curing times. For the analysis of the surface microstructure and establishment of the best printing pattern, samples in bar format following ISO 4049 (25 x 10 x 3 mm) were designed in CAD software (Rhinoceros 6.0), printed on the W3D printer (Wilcos), and light-cured in Anycubic Photon at different times (without curing, 16 minutes, 32 minutes, and 1 hour). For the structural characterization, analyses were carried out in FTIR (Fourier Transform Infrared Spectroscopy) and Scanning Electron Microscopy (SEM). The mechanical behavior of the resin was based on flexural strength tests and Knoop microhardness. Color and translucency analysis were performed with a spectrophotometer (VITA Easy Shade Advanced 4.0), which was evaluated following CIELab, using gray, black, and white backgrounds. All analyses were performed immediately after making the samples and repeated after thermal aging with 2 thousand cycles (5-55 °C). The results obtained were statistically analyzed with a significance level of 5%. FT-IR analysis showed about a 46% degree of conversion on the surface and 37% in the center of the resin sample. The flexural strength was higher for the groups polymerized for 32 min and 1h, while the Knoop microhardness did not show a statistical difference between the groups. Color and translucency analysis also did not show statistical differences between groups. According to all the analyses carried out in this study, for the evaluated material, the post-polymerization time of 1 hour can be suggested to improve the mechanical performance of 3D-printed devices.

Wirobond C is a commercial dental casting alloy suitable for the fabrication of crowns, bridges as well as metal-ceramic restorations. This work aims with the study of the effect of ready-to-use Listerine® and Meridol® mouthwashes and sodium fluoride on corrosion resistance of the CoCrMo dental alloy to electrochemical corrosion in artificial saliva at 37 °C. SEM, EDS, SKP, and microhardness investigations were carried out to characterize the material under study. In vitro corrosion resistance of the CoCrMo alloy was conducted by the open circuit potential method, electrochemical impedance spectroscopy, and anodic polarization curves. The presence of Co 59.8(8) wt.%, Cr 31.5(4) wt.%, and Mo 8.8(6) wt.% was confirmed. The CoCrMo alloy was characterized by Vickers microhardness of 445(31) µHV0.3. Based on EIS data, the capacitive behavior and high corrosion resistance of CoCrMo alloy was revealed. The kinetics of pitting corrosion in the artificial saliva was lower after the modification with NaF and Listerine and Meridol mouthwashes. The potentiodynamic characteristics revealed the passive behavior of CoCrMo alloy in all solutions. Based on the SKP measurements of the CoCrMo alloy after corrosion tests, the effect of artificial saliva modification on electronic properties of Bego Wirobond C dental alloy was found.

Current scientific knowledge and guidelines in bone and soft tissue augmentation, suggest the use of
staged surgical workflows as gold standards in regenerative procedures during implant therapy. In this
context, the process is always the same regardless of the techniques applied: an
alternate series of surgical acts is following one another after the completion of a specific period of
osseointegration or graft maturation. As a result, the overall surgical treatment is often long, invasive and
induce scar tissue formation.
This article proposes a novel, fast and less invasive biphasic protocol with the use of a well documented
cortical barrier mounted on stock healing abutments that are further replaced by customised abutments
on an early second stage. 2 cases are reported, one for an upper maxillary edentulous area and the other
for a mandibular, with a total of 4 implants placed.
Results at 4 months post op, showed an optimal soft tissue configuration for both cases with adequate
cervical profile generation and sufficient supracrestal complex height above the implant platforms.
Significant bone gains were also recorded through CBCT data collection either with alveolar width
measurements on axial slices, superposition of preop and postop datasets and 3D visualization after bone
volume segmentation.
Further studies will be needed in the future to evaluate the efficacy of this protocol in both hard and soft
tissue augmentation for edentulous sites in need of implant rehabilitation.

3D printing technology has brought about a paradigm shift in the delivery of clinical care in medicine and dentistry. There are several different 3D printing technologies, which, along with different printable materials with unique biomechanical properties, allows for a wide range of applications for 3D printing in dentistry. The clinical use of 3D printing has created versatile applications which streamline our digital workflow. Technological advancements have also paved the way for the integration of new dental materials in dentistry. This paper provides an overview of the mechanisms of 3D printing, the dental materials relevant to each mechanism and the possible applications of these materials within different areas of dentistry. Understanding the existing spectrum of 3D printing applications in dentistry will serve to further expand its use in the dental field.

The aim of this systematic review is to describe and to identify prospect of β-Tricalcium Phosphate (β-TCP) as Alveolar Bone Grafting (ABG) in Cleft Lip/Palate (CL/P) or alveolar bone cleft defect. A systematic review protocol based on Preferred Reporting Items for Systematic Reviews and Meta Analyses 2020 (PRISMA 2020) was drafted. The literature search was conducted with MEDLINE/PubMed, Web of Science/ ISI-Web of Knowledge, Scopus and Cochrane Library with English language and no publication year limits. The keywords yielded a total of 5824 publications. There are 3196 suitable articles to evaluate after removing duplicates and languages. Afterward, 1315 studies left after doing title and abstract reading. In addition, 85 full-articles were assessed for eligibility. The read the complete texts of those papers and eventually chose 20 that matched the inclusion requirements. Thirteen of the twenty studies included in this systematic review had a low risk of bias, one had a high risk of bias, and six had moderate bias which not report the randomization. β-TCP as ABG is biocompatible, visible and practical, offers a less invasive procedure, and does not interfere with orthodontic treatment. β-TCP as synthetic ABG can be the alternative to autologous bone grafts with several terms and conditions. Improvement of β-TCP efficacy for ABG in CL/P or alveolar bone cleft defects can be done by a tissue engineering approach combining β-TCP with growth factor, mesenchymal stem cells, or other graft materials and modification of β-TCP physical properties.

Background: This study aimed to evaluate survival rate, marginal bone levels, and full arch prosthetic success on short implants when placed in areas of severely resorbed and edentulous mandibles. Methods: This is a systematic review of all randomized controlled trials of at least 10 patients with a control group in which bone augmentations were performed that were published between January 2010 and February 2023. Only 3 relevant studies met the inclusion criteria. Results: It obtained demonstrate that short-term dental implant survival rates ranged from 94.2% to 97.4% with a 5-year follow-up and the prosthetic success rate varied by 62% during the same follow-up. The mean marginal bone level values ​​of the affected short implants ranged from 0.2 mm to 0.6 mm. Conclusions: The data obtained demonstrated that short dental implants positioned with criterion and precision as a full-arch fixed support are a valid therapeutic choice for the medium-long term rehabilitation of severe edentulous mandibular atrophy.

Background: Psychological sufferings are observed among dental students during their academic years, which had been intensified during the COVID-19 pandemic. Objectives: This study assessed the levels and identified factors associated with psychological distress, fear and coping experienced by dental undergraduate students in Bangladesh. Methods: A cross sectional online survey was conducted during October-November, 2021. The Kessler Psychological Distress Scale (K-10), Fear of COVID-19 Scale (FCV-19S) and Brief Resilient Coping Scale (BRCS) were used in order to assess psychological distress, fear and coping strategies respectively. Results: A total of 327 students participated; the majority (72%) were 19-23 years old and females (75%). One in five participants were infected with COVID-19 and 15% reported contact with COVID-19 cases. Negative financial impact (AOR 3.72, 95%CIs 1.28-10.8), recent or past COVID-19 infection, contact with COVID-19 cases were associated with higher levels of psychological distress; but being a 3rd year student (0.14, 0.04-0.55) and being satisfied about current social life (0.11, 0.03-0.33) were associated with lower levels of psychological distress. Being a 3rd year (0.17, 0.08-0.39) and a 4th year student (0.29, 0.12-0.71) were associated with lower levels of fear. Health care service use and feeling positive about life were associated with medium to high resilience coping. Conclusions: This study iden-tified dental students in Bangladesh who were at higher risk of psychological distress, fear and coping during the ongoing pandemic. Development of mental health support system within dental institution should be considered in addition to the academic and clinical teaching.

Retinopathy is a human eye disease that causes changes in retinal blood vessels that leads to bleed, leak fluid and vision impairment. Symptoms of retinopathy are blurred vision, changes in color perception, red spots, and eye pain. In this paper, a new methodology based on Convolutional Neural Networks (CNN) is developed and proposed to diagnose and give a decision about the presence of retinopathy. The CNN model is trained by different images of eyes that have retinopathy and those which do not have retinopathy. The performance of the proposed model is compared with the related methods of DREAM, KNN, GD-CNN and SVM. Experimental results show that the proposed CNN performs better.

Introduction: Dental health care workers, particularly dental medicine students (DMS), are at an increased risk of hepatitis B virus (HBV) and hepatitis C virus (HCV) infection. The aim of our study was to assess the level of knowledge on HBV and HCV, estimate needlestick injury (NSI) prevalence and reporting practice in DMS at the University of Zagreb and analyze how enrolment in obligatory and supplemental courses affects knowledge and needlestick injury reporting practice. Materials and methods: The knowledge was assessed by our questionnaires based on Centers for Disease Control general handouts. Additional information was collected to examine the prevalence and reporting practice of NSI. Data was analyzed by descriptive statistical analysis, independent-samples t-tests, proportion analyses and combined factor analyses of categorical and quantitative variables in SPSS and R. Results: In total, 206 students participated. The overall level of HBV and HCV-related knowledge was poor with average scores being 61.90% and 51.35% respectively. Moreover, students enrolled in the first year demonstrated significantly lower levels of knowledge in comparison with their older peers. Of all participants 18.2% sustained a needlestick injury, and majority of them (78.95%) never reported the injury. Conclusion: In conclusion, DMS have low levels of knowledge on important occupational pathogens and poor NSI reporting practice. Moreover, formal education in the current form failed to significantly improve competence of students and theoretical knowledge translates poorly into more conscientious injury reporting practice. We should look for a better way to increase student awareness and level of knowledge on this topic.

There are different treatment options in modern dentistry for the replacement of lost dentition. Of these the most upcoming and acceptable treatment option is Dental implants. The common problem usually with immediate implant placement in the anterior region is the post-operative soft tissue contour as a part of the bone modelling during healing. Hurzeler et al in 2010 introduced a new technique called the “socket shield technique”. This technique has been used as an alternative treatment modality for immediate implant placement in the aesthetic zone.This review articles provides a detailed information regarding the clinical concept of Root membrane technique.

Dental implants provide a predictable treatment option for partial and complete edentulism via the placement of fixed permanent artificial root to support prosthetic dental crowns. Despite the high survival rates, long-term implant failures are still reported leading to implant removal and additional financial and health burdens. While extrinsic factors that improve survival rate of implants have been well explored, the impact of genetic factors on this matter is poorly understood. A systematic review and meta-analysis study was conducted to determine whether genetic factors contribute to increase the risk of dental implant failure. A comprehensive search for peer-reviewed articles on dental implants and genetics was performed using various literature database libraries. The study design was conducted according to PRISMA guidelines, and the obtained records were registered in PROSPERO database. According to the exclusion/inclusion criteria, 11 studies were eligible for this study out of 808 articles. The meta-analysis of the combined association studies of DNA variations and dental implants did not indicate an increase risk for implant failure due to DNA variations in IL-1B, IL-10 and TNF-α. This study emphasizes the need for larger randomized controlled clinical trails to inform clinicians and patients about the role of genetic factors on dental implant survival and success rate in healthy and compromised patients.

Stem cells derived from dental tissues—dental stem cells—are flavored due to their easy acquisition. Among them, dental pulp stem cells (DPSCs) extracted from the dental pulp have many advantages such as high proliferation and highly purified population. Although their ability for neurogenic differentiation has been highlighted and neurogenic differentiation using electrospun nanofibers (NFs) has been performed, graphene-incorporated NFs have never been applied for DPSC neurogenic differentiation. Here reduced graphene oxide (RGO)-polycaprolactone (PCL) hybrid electrospun NFs were developed and applied for enhanced neurogenesis of DPSCs. First, RGO-PCL NFs were fabricated by electrospinning with incorporation of RGO and alignments, and their chemical and morphological characteristics were evaluated. Furthermore, in vitro NF properties such as influence on the cellular alignments and cell viability of DPSCs were also analyzed. The influences of NFs on DPSCs neurogenesis was also analyzed. The results confirmed that an appropriate concentration of RGO promoted better DPSC neurogenesis. Furthermore, the use of random NFs facilitated contiguous junctions of differentiated cells, whereas the use of aligned NFs facilitated aligned junction of differentiated cells along the direction of NF alignments. Our findings showed that RGO-PCL NFs can be a useful tool for DPSC neurogenesis, which will help regeneration in neurodegenerative and neurodefective diseases.

Enamel matrix derivative (EMD) is used for periodontal tissue regeneration therapy, and can induce mineralization in dental pulp cells (DPCs). We designed a synthetic peptide (SP) derived from the response of cells to EMD, and investigated the effect of the SP on potentiating osteogenesis in DPCs, which have a critical role of dental pulp homeostasis. DPCs were treated with 0, 10, 100, or 1000 ng/mL SP to determine its effect on cell proliferation, cell migration, cell differentiation, and mineralization. We then examined the molecular effects of the SP, focusing on changes in the mitogen-activated protein kinases (MAPK) signaling pathway in these cells. The SP significantly promoted DPC proliferation and migration. Cultures treated with the SP also showed an enhanced expression of markers of osteogenic differentiation and mineralization. The SP also induced the activation of MAPK signaling pathway components. These results suggest that our SP could promote the dental pulp tissue repair by hard tissue formation and the mineralization through activating MAPK signaling pathway. This study provides the first evidence that SP might be a new material for dental pulp tissue treatment.

In the area of dental healthcare services, where patients and professionals deal with multiple auditory stimuli, this cross-sectional study reports on the intricate dynamics of sound preferences, noise obstacles, and the profound impact of music on anxiety reduction within dental office set-tings. The sample comprises of 134 dental patients, primarily females (56.7%), with varying age groups, education levels, and therapy durations in the university clinics of the department of Dentistry, National and Kapodistrian University of Athens and four private dental offices at the metropolitan area of Athens, Greece. Notably, 92.5% of the participants report no hearing loss, and 56.7% exhibit some level of noise sensitivity. The study reveals a moderate to good perceived health status (M=3.84, SD=0.95) among participants, with low perceived noise disturbance in university dental clinics. Preferences for instrumental music, foreign pop, and classical music are prominent during waiting times. Potential irritations include impersonal treatment (44%) and staff behavior (41.8%). Music player usage within the settings of the dental clinic involves radios (49.3%) and headphones (41.0%). Correlations and predictors indicate associations between health status, music preferences, and noise disturbances. More specifically, visiting the university dental clinics (β = .300, p = .005) as well as younger age (β = .300, p = .034) were significant predictors of better perceived health status. Clearer perception of external sounds while using the music player (β = .190, p = .039) was a significant predictor of better perceived health status, while poorer health was predicted by the preference of Greek folk songs (β = -.200, p = .030). Also, the use of smartphones for playing music was related to poorer health (β = -.370, p < .001). Following, younger age (β = -.270, p = .015), lower education (β = -.210, p = .035), higher noise sensitivity (β = .190, p = .027), as well as feelings of anxiety and nervousness due to ambient noise from people and machines (β = .510, p = .027) were significant predictors of noise disturbance from machines. Also, visiting private clinics (β = .240, p = .018), preferences of specific playlist (β = .310, p = .012), no music (β = .280, p = .016) and use of smartphones to play music (β = .230, p = .029) were significant predictors of noise disturbance from patients or staff. Finally, the preference of listening to a specific playlist was related to better health status (r = .190, p < .05). Findings aim to optimize eco-soundscapes in dental offices, con-tributing to enhanced patient well-being. The research underscores the potential of music inter-ventions to alleviate dental anxiety and improve the overall dental experience and quality care.

Background: The main objective of this study is to develop a customized metatarsophalangeal implant for the treatment of various conditions affecting this specific joint. This approach involves replacing the joint with a custom implant designed specifically to fit each patient's unique anatomical structure. The need for custom implants stems from the obvious lack of size variety available, which presents a major challenge when, the search for the ideal size implant can be a hard task, also when considering the possibility of extensive modification of the bone to adapt it to the available implant. This adaptation, often synonymous with bone reduction, can cause significant post-operative pain for the patient and impact healing time. Methods: A comparative study of modeling software was carried out to select the perfect software, by defining and comparing the relevant criteria. Similarly, the different biomaterial options were examined and compared to select the one best suited to this project, mentioning the imaging modality used to determine the types of images used for our approach. Finally, the 3D printers used in this work were represented, highlighting their technical characteristics. Findings: A resin metatarsophalangeal implant prototype was created using 3D modeling and reconstruction software and tools. Interpretation: Reconstruction and 3D modeling techniques are revolutionizing implant creation, offering customized solutions for patients suffering from metatarsophalangeal joint disorders caused by a wide range of diseases. These results have significant implications for disability management and rehabilitation, encouraging further exploration and progress.

A maxillary totally edentulism was rehabilitated with one-piece implants starting from pre-existing totally removable denture. A 3D digital scan of the removable denture and upper and lower arches was performed. On this basis, a prototype with optimal esthetic and functional outcomes was re-alized and turned into a custom-made radiological stent with markers. The superimposition of STL and DICOM files allowed the virtual planning of one-piece implants ideal position. The stackable templates composed of a fixed component, namely base template, and removable components, were realized. The fixed component, once secured with anchor pins to the bone, was no longer removed. The removable components, screwed to the fixed component, were used to perform the implant surgery and the immediate prosthetic loading. A base template allowed for maintaining a fixed reference during the entire workflow, improving the transition between the digital project, the surgical procedure, and the prosthetic rehabilitation.

Finite element (FE) modeling is commonly used as a method to investigate the influence of medical devices, such as implants and screws and their effects on the biomechanical behavior of the spine. Another simulation method is a multi-body simulation (MBS), where the model is composed of several non-deformable bodies. MBS solvers generally require a very short computing time for dynamic tasks compared to an FE analysis. Considering this computational advantage, in this study, we examine whether parameters whose values are not known a priory can be determined with sufficient accuracy using MBS model. Therefore, we propose a Many-at-a-time sensitivity analysis method that allows approximating these a priory unknown parameters without requiring long simulation times. This method enables a high degree of MBS model optimization to be achieved in an iterative process. The sensitivity analysis method is applied to a simplified screw-vertebra model, consisting of an anterior anchor implant screw and vertebral body of C4. An experiment described in the literature is used as a basis for developing and assessing the potential of the method for sensitivity analysis and to validate the models action. The optimal model parameters for the MBS model were determined to be c=823224N/m for stiffness and d=488Ns/m for damping. The presented method of parameter identification can be used in studies including more complex MBS spine models or to set initial parameter values that are not available as initial values for FE models.

Cervical fusion has been a standard procedure for treating the abnormalities associated with the cervical spine. However, the reliability of anterior cervical discectomy and fusion (ACDF) has become arguable due to its adverse effects on the biomechanics of adjacent segments. One of the drawbacks associated with ACDF is adjacent segment degeneration (ASD) which has served as the base for the development of dynamic stabilization systems (DSS) and total disc replacement (TDR) devices for cervical spine. However, the hybrid surgical technique has also gained popularity recently but their effect on the biomechanics of cervical spine is not well researched. Thus, the objective of this FE study was to draw the comparison among single, bi-level and hybrid surgery with DCI implant with traditional fusion. Reduction in range of motion (ROM) for all the implanted models was observed for all the motions except extension, compared to intact model. The maximum increase in ROM of 42% was observed at C5-C6 level in Hybrid-DCI model. The maximum increase in adjacent segment’s ROM of 8.7% was observed in multilevel fusion model. The maximum von Mises stress in the implant was highest for the multilevel DCI model. Our study also showed that the shape of DCI implant permits flexion/extension relatively more compared to lateral bending and axial rotation.

Background: Dental education blends theoretical and practical training to prepare students for independent patient care. This study examines the confidence levels of dental students in Umeå regarding independent performance of general dentistry tasks, and whether this confidence changes after clinical training. Methods: Surveys were conducted before and after a summer clinical internship, with s tudents rating their comfort levels on a scale from 0 to 10 for various procedures. Results: Results from 64 initial surveys and 54 follow-up surveys showed no significant difference in confidence before and after the internship. However, confidence levels varied based on whether students had practiced specific tasks during the internship. Students felt least confident in managing acute dental trauma and treating cavities in young children, while they were most confident in tasks like obtaining radiographic surveys and debriding periodontally compromised dentition. Tooth extraction and dental fillings were the most practiced procedures during the internship. Conclusions: The study concludes that the internship between the ninth and tenth semesters does not notably boost students' confidence in specific dental procedures, possibly due to the short duration of the training. Further exploration, including input from clinical supervisors, is suggested to optimize clinical training in dental education.

Dental pulp chamber volume is a fundamental measurement in the field of endodontics, but also in forensic sciences, teaching and training, or tissue engineering. This study evaluates the precision of cone beam computed tomography (CBCT) in comparison with computed micro-tomography (micro-CT) in evaluating pulp chamber volume of upper central incisors ex vivo. The intra-operator and inter-operator error were evaluated, and the results for the two techniques were compared with a T-test for paired samples. Intra-operator and inter-operator errors were >0.05, indicating an adequate reproducibility in each operator and no significant differences between their meas-urements. On the other hand, no significant differences between the two measurement techniques. The present results demonstrate that CBCT is a precise, feasible and reproducible technique for evaluation of dental pulp chamber volume ex vivo. Results provided with this method are suitable for different medical branches but also for teaching and training of undergraduate and post-graduate students. Furthermore, the findings of this study carry significant clinical implications, as accurate assessment of pulp chamber volume is critical in the diagnosis and treatment of various endodontic conditions. The ability of CBCT to provide reliable 3D dental anatomy measurements can enhance the planning of endodontic treatments by allowing for a better understanding of internal tooth morphology. Additionally, the precision and reproducibility of CBCT in assessing pulp chamber volume can contribute to improved clinical outcomes and reduced complications during endodontic procedures. These findings further support the increasingly vital role of CBCT in modern clinical practice and underscore its value as an indispensable tool in the field of dentistry.

Tooth extraction is the most common procedure in dental practice. However, in the long term, it may cause alveolar ridge atrophy. This systematic review aimed to evaluate the role of platelet-rich fibrin (PRF) in post-exodontic alveolar ridge preservation in terms of its effectiveness in the regeneration of bone tissue as assessed by imaging and its efficacy compared to physiological bone healing. The study is presented in accordance with the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. This systematic review was conducted using electronic databases such as PubMed, Scopus, Web of Science, and Science Direct. The grey literature search was conducted in the New York Academy of Medicine Grey Literature Report. All the studies in this systematic review were randomized controlled trials (RCTs). The risk of bias was performed according to the Cochrane Handbook for Systematic Reviews of Interventions 6.2 (RevMan 6.2). Considering the inclusion and exclusion criteria, we included 17 randomized clinical trials, published up to 2022 investigating the efficacy of PRF in post-exodontic bone regeneration. Based on the results of clinical studies, it can be stated that despite not being statistically significant, PRF promotes neoformation and prevents bone loss between three and four months post-extraction.

The scope of this paper is to compare different dental sealants and flow materials indicated for sealing pit and fissures considering their chemical formula. The narrative review aims to address the questions: What is the essence of different dental sealants’ activity, how their chemical formula affects their mechanisms of caries prevention and what makes a dental sealant efficient mean of caries prevention. Another vital issue is whether the sealants which contain fluoride, or any other additions have potentially increased antimicrobial properties. Methods: An electronic search of the PubMed, Cochrane, Web of Science and Scopus databases was performed. The following keywords were used: (dental sealants) AND (chemical composition). Additionally, information about composition and indications for clinical use provided by manufacturers were utilized. The review aims are to find crucial elements of sealants’ composition which affect their cariostatic mechanisms.

The lactoperoxidase (LPO) system shows promise in the prevention of dental caries, a common chronic disease. This system has antimicrobial properties and is part of the non-specific antimicrobial immune system. Understanding the efficacy of the LPO system in the fight against biofilms could provide information on alternative strategies for the prevention and treatment of caries. In this study, the enzymatic system was modified using four different (pseudo)halide substrates (thiocyanate, thiocyanate-iodide mixture, selenocyanate, and iodide). The study evaluated the effects of such modifications on the ability of Streptococcus mutans to form a biofilm, the synthesis of insoluble polysaccharides, the synthesis of lactate, the consumption of glucose and sucrose, the concentrations of intracellular NAD+ and NADH and the efficiency of transmembrane glucose transport by phosphoenolpuryvate PEP-carbohydrate phosphotransferase (PTS). The results showed that the LPO-iodide system had the strongest inhibitory effect on biofilm growth and lactate synthesis (complete inhibition). This was associated with an increase in the NAD+/NADH ratio and an inhibition of glucose PTS activity. The LPO-selenocyanate system showed a moderate inhibitory effect on biofilm biomass growth and lactate synthesis. The other systems showed relatively small inhibition of lactate synthesis and glucose PTS but no effect on the growth of biofilm biomass. This study provides a basis for further research on the use of alternative substrates of the LPO system, particularly the LPO-iodide system, in the prevention and control of biofilm-related diseases.

Worldwide, oral lesions and cancers are still being significant public health conditions. Thus, an introduction of new oral healthcare protocols is becoming essential. Oral diseases are related to many causative factors, manly dental plaque/biofilm due to poor hygiene. New anti-biofilm therapies are needed to develop. The strategies of anti-biofilm therapies should help to control biofilm formation and microbial attachment to dental surfaces. The present review aimed to provide a comprehensive over-view on evidence related to the potential utility of topical oxygen therapy (BlueM formula) as novel oral care therapies in clinical practice.

The purpose of this in vitro study is to evaluate the effectiveness of incorporating a new irrigation system into a surgical guide and monitor its effect on heat generation during implant bed preparation. A total of 48 surgically guided osteotomies were performed on 12 bovine ribs divided into 4 groups, using different irrigation techniques: Group A (test) had entry and exit channels incorporated into the guide; Group B had a similar design with an entry channel only; Group C had conventional external irrigation; Group D (control) had no irrigation. Heat generation during the osteotomies was measured using thermocouples placed at a depth of 2 mm and 6 mm. The lowest mean temperature was observed in Group A (22.1°C at 2mm and 21.4°C at 6mm), this was statistically significant when compared with Groups C and D (p&lt;0.001). Group A showed a lower mean temperature compared with Group B as well, however statistically significant only at 6mm depth (p&lt;0.05). In conclusion, the proposed guide has significantly reduced heat generation during implant osteotomy. The integration of an exit cooling channel can resolve limitations found in previously designed surgical guides and can be easily incorporated into computer designing and 3D printing software.

Streptococcus mutans is a key bacterium in dental caries- one of the most prevalent chronic infectious diseases. Conventional treatment both fails to specifically target the pathogenic bacteria and at-tempts to eradicate commensal bacteria as well. Thus, caries remains one of most common and challenging diseases. The use of bacterial viruses as anti-bacterial agents, is gaining interest worldwide. Hardly any phages were described against S. mutans. The objective of this study was to isolate anti-S. mutans phages and to characterize their antimi-crobial properties. Human saliva samples were filtered and screened for potential phages. Standard double-layered agar method was used for isolation. Whole genome sequence analysis and morphology visualization by TEM, were used for anti-S. mutans phage identification. Antibacterial properties were evaluated using clinical strains and ATCC strains of S. mutans in various states. Antibacterial effect was also tested on human cariogenic dentin. One phage against S. mutans was isolated and termed SMHBZ8. This phage showed effective lytic activity in vitro against both planktonic and biofilm S. mutans cultures. Moreover, the phage showed antibacterial effect when used on cariogenic dentin. The isolation and characterization of SMHBZ8 may be the first step in developing a potential phage therapy for dental caries.

Both types of surgical guides – with and without metal sleeves are founded beneficial in clinical studies. The aim of this in vitro study was to compare time of surgical procedure in dental implantology depending of used type of the surgical guide. Ten three dimensional (3D) printed models of lower jaws were prepared based on complete virtual model of patient clinical conditions with missing teeth 37, 46 and 47. Five of this models were used for implant sites preparation performed with use of surgical guide without metal sleeves and dedicated surgical kit, and next five were used for the same procedure performed with surgical guide with metal sleeves and dedicated surgical kit. Time of implant site preparation were measured and noted. Statistical analysis was performed using Student’s t test for independent samples. Difference of time in both groups were founded as statistically significant (t=-9.94; df =28; p=0.0000). Type of surgical guide is important factor which can impact on time of implant site preparation and all surgical procedure.

Purpose: to assess any differences on marginal bone loss between bone-level or tissue-level dental implants through a review of literature until September 2019. Materials and methods: MEDLINE, Embase and other database were searched by two independent authors. The search was limited to articles in English. Results: The search provided 1028 records and, after removing the duplicates through titles and abstracts screening, 45 full-text articles were assessed for eligibility. For qualitative analysis 20 articles were included, 17 articles of them for quantitative analysis. A total of 1161 patients (mean age 54,4 years) and 2933 implants were observed, 1427 (Tissue-level) and 1506 (Bone-level). The survival rate and the success rate were more than 90%, except for 2 studies with a success rate of 88% and 86.2%. No studies reported any differences between groups in term of success and survival rates. Three studies showed that BL-implants had statistically less marginal bone loss (P< 0.05). Only one study reported statistically less marginal bone loss in TL-implants (P< 0.05). In the most part of the studies, differences between implant types in marginal bone loss were not statistically significant. Conclusion: Despite to the peri-implant tissue around transmucosal implants has been reported to be inflammation-free because of the absence of bacterial infiltration in the micro-gap between the fixture and abutment, no clinical and radiological differences were highlighted between groups from the included studies after a variable period of follow-up ranged between 1 to 5 years.

Mucosal irritation caused by cusps of upper and lower teeth represents a source of persistent, low grade mechanical trauma. This type of trauma can initiate and/or perpetuate oral lichen planus in a few susceptible patients. Here, we report a rare case of bilateral white linear striations in the buccal mucosa of a young patient, associated with sharp cusps. Oral lesions demonstrated a unique cuspal signature highlighting the causal role of subtle mucosal trauma in the genesis of reticular-oral lichen planus. Lesions appeared to be exacerbated by significant psychological distress experienced by the patient. Although the Koebner phenomenon is well reported in the cutaneous lichen planus literature, such presentations are relatively rare in the oral cavity. This report emphasizes the potential role of low-grade cuspal trauma/irritation in conjunction with psychological distress in the genesis of oral lichen planus.

Purpose: This study builds upon an established effective training method to investigate the advantages of high variability phonetic identification training for enhancing lexical tone perception and production in Mandarin-speaking pediatric cochlear implant (CI) recipients, who typically face ongoing challenges in these areas. Method: Thirty two Mandarin-speaking children with CIs were quasi-randomly assigned into the training group (TG) and the control group (CG). The sixteen TG participants received five sessions of high variability phonetic training (HVPT) within a period of three weeks. The CG participants did not receive the training. Perception and production of Mandarin tones were administered before (pretest) and immediately after (posttest) the completion of HVPT via lexical tone recognition task and picture naming task. Both groups participated in the identical pretest and posttest with the same time frame between the two test sessions. Results: TG showed significant improvement from pretest to posttest in identifying Mandarin tones for both trained and untrained speech stimuli. Moreover, perceptual learning of HVPT facilitated trainees’ lexical tone production as rated by a cohort of 10 Mandarin-speaking adults with normal hearing. In contrast, CG did not exhibit significant changes in either perception or production. Conclusion: The results represent initial evidence of HVPT-induced transfer of perceptual learning to lexical tone production in CI users, which supports the application of this speech training protocol to aural rehabilitation practice.

Stem cell-based regeneration strategies have shown therapeutic efficacy in various fields of regenerative medicine. These include bone healing after bone augmentation, often complicated by pain, that is managed by using non-steroidal anti-inflammatory drugs (NSAIDSs). Information is limited about how NSAIDSs affect the therapeutic potential of stem cells. Therefore, we investigated the effects of ibuprofen and diclofenac in low and high therapeutic doses on the properties of human mesenchymal stromal cells isolated from the dental pulp (DPSCs) and cultured in vitro. Ibuprofen and diclofenac significantly reduced the viability of DPSCs, while the expression of mesenchymal stem cell surface markers was unaffected. Both ibuprofen and diclofenac treatment significantly upregulated the expression of HGF, while the expression of VEGFA remained unchanged. Ibuprofen significantly altered the expression of several apoptosis-related genes, including upregulation of CASP9 and BCL2, with decreased CASP3 expression. BAK, CASP3, CASP9, and BCL2 expressions were significantly increased in the diclofenac-treated DPSCs, while no difference was demonstrated in BAX expression. Our results suggest that concomitant use of the NSAIDSs ibuprofen or diclofenac with stem cell therapy may negatively impact cell viability and alter the expression of apoptosis-related genes, which can affect the efficacy of stem cell therapy.

The present review compared the efficacy of soft tissue substitutes (STS) and autogenous free gingival graft (FGG) or connective tissue graft (CTG) in mucogingival procedures to increase keratinized tissue (KT) width around teeth and implants. Two independent examiners performed the electronic search on Medline and Cochrane Library based on the following PICO’s format: (P) adult patients; (I) soft tissue substitutes and FGG/CTG; (C) STS vs CTG; STS vs FGG; STS vs CTR; (O) KT width gain; (S) Systematic Reviews, Randomized Controlled Trials. Results showed that around teeth, all biomaterials showed superior performance compared to CAF alone for treating gingival recessions. However, when compared to CTG, ADM yields the most similar outcomes to the gold standard (CTG), even though in multiple recessions CTG still continue to be considered the most favorable approach. Use of STSs (acellular matrix or tissue engineered) in combination with an apically positioned flap resulted in a significantly less gain of KTW compared to what achieved with FGG and APF. Around dental implants, free gingival grafts were deemed more effective than soft tissue substitutes in enhancing keratinized mucosa width.

Despite well-documented health benefits of probiotics Saccharomyces, its application in oral health has not been comprehensively assessed. Dental caries is a transmissible disease initiated by acid production of cariogenic bacteria and yeast, such as Streptococcus mutans and Candida albicans, on tooth enamel and followed by subsequent enamel demineralization. Here, we investigated the effect of two Saccharomyces strains (Saccharomyces boulardii, Saccharomyces cerevisiae) on S. mutans-C. albicans cross-kingdom interactions using a cariogenic planktonic model. Viable cells, pH changes and gene expression were measured. S. cerevisiae and S. boulardii inhibited the growth of C. albicans either in dual-, or multi-species conditions. Saccharomyces also inhibited C. albicans hyphal formation. Furthermore, Saccharomyces reduced the acidity of the culture medium which usually plummeted below pH 5 when S. mutans and C. albicans were present in the model. The presence of Saccharomyces maintained the culture medium above 6 even after overnight incubation, demonstrating a protective potential against dental enamel demineralization. S. boulardii significantly downregulated S. mutans atpD and eno genes expression. Overall, our results shed light on a new promising candidate, Saccharomyces, for dental caries prevention due to its potential to create a less cariogenic environment marked by a neutral pH and reduced growth of C. albicans.

Background:This study evaluated the effect of low-level laser therapy on postoperative pain and wound healing in children undergoing primary molar extractions.Methods:40children,6-10years of age, systemically healthy, and had atraumatic extraction indications of bilateral primary molar teeth were included in the study. First session randomly selected tooth was extracted under local anesthesia. In the control group, only the clot formation on the socket was observed and photographed. Other group extraction's performed 2weeks later. The LLLT group treated with980nm wavelength Doctor Smile Wiser diode laser and photographed. Non-epithelialized surface measurements performed with the ImageJ program. Pain assessment was performed with Wong-Baker Pain Scale. Statistical analyzes were performed with SPSS software.Results: There was no statistically significant difference in Wong-Baker values(p&gt;0.05). The laser group had more '0' values on days 1 and7; same values as the control group were recorded on other days. In soft tissue healing 3rd day evaluations, non-epithelialized surface of laser socket was found to be smaller than control group, and measurement results were found to be statistically significant(p&lt;0.05). The other days' measurement results were not statistically significant(p&gt;0.05).Conclusions:Although LLLT not found to be very effective in reducing postoperative discomfort after extraction of primary molars, it provides better wound healing in extraction sockets.

Composite materials are widely used in the dental field in clinics as biomaterials. For example, it has been used as a biomaterial to repair caries and restore masticatory function, and as a cement to adhere the restoration to the tooth substrate. In order to demonstrate its function, dental biomaterials are measured their mechanical strength. From such basic research, we explained the potential of dental biomaterials, especially flexural strength and modulus of elasticity. Mechanical properties of dental biomaterials similar to those of the tooth, thermal stimulation, and aesthetic elements in the oral cavity. In this part, we will introduce the commercialized products of composites suitable for the characteristics and tooth quality, and provide the reader with the characteristics from the flexural characteristics of the composite materials used in clinical dentistry. In clinical performance, it might be advisable to delay polishing when composite biomaterials are used for luting materials, filling materials and core build-up materials since improved the flexural strength and the flexural modulus of elasticity were displayed after 1-day storage. And it is thought that flexural strength or characteristics is a significant important mechanical property of oral biomaterials.

Background: Dental professions are at high risk of contracting novel corona virus (COVID-19) infections during the dental procedure due to the droplets and aerosols generated during various dental procedures on infected patients. To prevent and avoid the cross-infection of the infection to dental professionals or the patients attending the dental clinic, good knowledge of the infection and its prevention mechanisms is mandatory among the professionals. Until to date, there is no pooled estimate on the knowledge,attitude and practice (KAP) of dental professionals to COVID-19 in the globe. Hence, this study aimed to determine the pooled estimate of KAP of dental professionals in this pandemic disease. Methods: Article search was done electronically using Medline, Scopus, Web of Science, EMBASE, SciELO and Google Scholar from June 1, 2020 to August 20, 2020. All studies that assessed the KAP of dental professionals to COVID-19 were searched and included in this review after passing the inclusion criteria. The pooled analysis of their knowledge (sign and symptom, mode of transmission and prevention mechanisms), attitude (their concern, intention to treat suspected patients) and practice (face mask usage, hand washing and alcohol based hand rub usage, handshaking practice, deferred procedures and checkup of patients temperature) was computed using RevMan 5.3 and random effect model was used. The presence of publication bias was assessed using the funnel plot. Results: Twelve articles with a total of 5,362 study participants were included in this study. The pooled estimate revealed that 59.91% of the dental professionals had good knowledge of the signs and symptoms of COVID-19. Two-third of dental professionals know the prevention mechanisms of the infection, and 70.13% had enough knowledge of the transmission modalities of the infection. The professional attitude revealed that only 36.43% of the participants had intention to treat a patient with cough or suspected COVID-19 (36.43%, 95%CI: 8.57, 64.29). Moreover, 47.85% of the dentists were concerned about their life, and the fate of their profession due to this pandemic disease (47.85%, 95%CI: 26.74, 68.97). The pooled analysis showed only 50.86% (95%CI: 18.64, 83.09) of the study participants worn face mask and 52.63% (95%CI: 10.54, 94.71) had avoided handshaking practice during this pandemic period. Non-emergency dental procedures were canceled by 83.98%. Conclusion: The dental professional KAP is not optimal. Thus, dental professionals should be aware of the recently updated knowledge about COVID-19 and practice according to the standards of treatment guidelines, and the recommended infection control measures in dental settings. Moreover, as saliva and droplets are the major sources of infection, dentists should follow essential protocols to regulate droplet and aerosol contamination in the dental practice

Cariogenic oral biofilms cause a considerable amount of recurrent dental caries around composite restorations every year, resulting in unprosperous oral health status and expensive restorative treatment for many patients. Quaternary ammonium monomers that can be copolymerized with the current dental resin systems have been increasingly explored for modulation of dental plaque biofilm growth over dental composite surfaces. Here, we investigated the effect of bis(2-methacryloyloxyethyl) dimethylammonium bromide (QADM), against human overlying mature oral biofilms grown intra-orally in human participants for 7 and 14 days, for the first time. Seventeen volunteers wore palatal devices containing composite specimens containing 10% by mass of QADM or a control composite without QADM. After 7 and 14 days, the adherent biofilms were collected for determination of bacterial counts via colony-forming unit (CFU) counts. The biofilm viability, chronological changes, and percentage coverage were also determined by live/dead staining. QADM composites caused a significant inhibition of S. mutans biofilm formation for up to seven days. No difference in the CFU values were found for the 14-day period. Our findings suggest that (1) QADM composite was successful in inhibiting 1-3 day biofilms in the oral environment in vivo; (2) QADM significantly reduced the portion of S.mutans group in a time course where patients at high risk of caries would develop initial enamel carious lesions; and (3) stronger antibiofilm activity is required for the control of mature long-term cariogenic biofilms. These results provide a perspective on the value of integrating bioactive restorative materials with traditional caries management approaches into clinical practice. Contact-killing strategies via dental materials aiming to prevent or at least reduce high numbers of cariogenic bacteria seem to be a promising approach in patients at high risk of recurrence of dental caries around composites.

Objectives (Purpose) This study aims to evaluate the outcomes of the Subcrestally Placed Implant (SPI) technique in single molar cases, focusing on biological stability and aesthetics. It proposes a schematic model to elucidate the interplay between the biological stability of soft tissues and bone around the SPI and the morphological requisites that Implant Abutment Prostheses (IAP) must fulfill to effectively replace natural teeth. Materials and methods I examined 20 cases using the SPI technique with Internal Platform Switching (IPS) design implants for single molar replacements to assess their stability. Routine check-ups utilized plain panoramic X-rays to measure changes in crestal bone on the mesial and distal sides. Additionally, 10 cases with CBCT X-rays taken more than one year after the initial surgery underwent a novel 3-dimensional soft tissue analysis (3DSTA). Measurements included placement depths (PD), soft tissue thickness (STT) at central (cPD, cSTT) and peripheral areas (pPD, pSTT), the length of the Transitional Zone (TZ) on mesial, distal, facial, and lingual aspects, and crestal bone thickness (CBT) at buccal and lingual sites. Results Panoramic analyses showed minimal changes in crestal bone (mean changes of pPD were less than 0.1 mm) over an average period of 3.3 years. Average measurements were as follows: cPD was 1.7 mm, pPD was 2.7 mm, cSTT was 0.2 mm, pSTT was 0.6 mm, TZ length was 3.8 mm, buccal CBT was 3.0 mm, and lingual CBT was 3.7 mm. Conclusions CBCT analyses of the topographical relationships between soft tissue and crestal bone with IAP for SPIs demonstrated stable results over an average 3-year period. The consistency in the relationship between crestal bone and surrounding soft tissue can be ascribed to biological structural integrity. The study classified peri-implant soft tissues into subcrestal and supracrestal (transitional zone – TZ) segments, exploring their characteristics through dimensional measurements and assessing mechanical resistance. Further histological study is needed to identify specific features of each segment.

(1) Teeth, represent in humans the most resilient tissues. However, exposure to concentrated acids might lead to their obliteration, thus making human identification difficult. Teeth often contain dental restorations from materials that are even more resilient to acid impact. This paper introduces novel method of 3D reconstruction of dental patterns as a crucial step for digital identification with dental records.; (2) With combination of modern methods of Micro-Computer Tomography, Cone Beam Computer Tomography, Attenuated Total Reflection in conjunction with Fourier-Transform Infrared Spectroscopy and Artificial Intelligence Convolutional Neural Network algorithms, the paper presents the way of 3D dental pattern reconstruction and human remains identification. Research studies morphology of teeth, bone, and dental materials (Amalgam, Composite, Glass-ionomer cement) under different periods of exposure to 75% sulfuric acid; (3) Results reveal significant volume loss in bone, enamel, dentine, and as well glass-ionomer cement. Results also reveal significant resistance of composite and amalgam dental materials to sulfuric acid impact, thus serving as strong parts in the dental pattern mosaic. Paper also introduces probably first successful artificial intelligence application in automated forensic CBCT segmentation.; (4) Interdisciplinary cooperation utilizing mentioned technologies can solve problem of human remains identification with 3D reconstruction of dental patterns and their 2D projections over existing ante-mortem records.

(1) Background/Objectives: Accurate determination of chronological age is crucial in legal dental identification. This study aimed to compare the effectiveness of different formulas in estimating the age of a Brazilian subpopulation by analyzing the pulp/tooth ratio of the maxillary canine and mandibular second premolar in panoramic and periapical radiographs. (2) Methods: The sample consisted of panoramic and periapical radiographs of 247 individuals. The file of each radiograph was opened in the Adobe Photoshop CS4® program to outline and obtain values in pixels for calculating the pulp/tooth ratio. Statistical analysis was conducted using the SPSS program, with a significance level set at 5%. (3) Results: The interclass correlation coefficient demonstrated excellent intra-observer agreement (0.990 – 0.999). The determination coefficients (R2) suggested that only 30-35% of the actual age results could be explained by the pulp/tooth ratio. Smallest differences were observed with Cameriere's formula for the mandibular second premolar on panoramic radiographs (+4.1 years). The greatest differences were found with the formulas for the mandibular second premolar in panoramic radiographs of the Korean (+12.5 years) and Portuguese (-12.1 years) populations. (4) Conclusions: The equations employed allowed for estimating the age of a Brazilian subpopulation and showed little agreement between the actual age and the estimated age.

Ledge formation presents a significant challenge in endodontic treatment. Yet, there is still a lack of educational tooth models for hands-on practice. This study aimed to create and evaluate a tooth model for ledge management practice. A natural tooth with curved roots was collected for scientific use under ethics committee approval. Following initial root canal preparation, the tooth was scanned using micro-computed tomography (μCT) and 3D reconstructed. A K-file, created via computer-aided design (CAD), was partly inserted into the root canal wall of the 3D-reconstructed tooth. By subtracting the K-file from the tooth, a tooth model with a root canal ledge was produced. The models were then 3D printed for a hands-on workshop. A seven-item Likert scale questionnaire was administered to 20 postgraduate students and 10 endodontists to assess the model's quality and training effectiveness. The feedback from both students and experts was positive, with no statistically significant differences found between the two groups (p &gt; 0.05). This novel tooth model is expected to address the existing gap in endodontic education and provide benefits for dental practitioners in future applications.

During the COVID-19 pandemic, the education sector of Bangladesh suffered a lot. To adapt to this uncertain situation, the online teaching-learning method was introduced for the first time in the dental colleges to continue regular classes. This qualitative study explored the in-depth perception among students of this new, affordable, flexible online learning method and to find out the scope of improvement of the delivery method. Two focus group discussions (FGD) were conducted, each including 6-8 participants (N=16, the male: female ratio was 7:9) for gaining an in-depth understanding of the perception of online teaching among the dental students. With the help of the trigger questions, the facilitator and moderators conducted both the FGDs. By analysing the Focus group discussion, four distinct themes were identified. The main themes extracted from the data refer to the difficulties which students faced during participation in online classes (e.g., low attention span, unusual timing of classes, internet accessibility, power cut, boring content, etc.), advantages of online learning (e.g., saves time, able to continue studying during the lockdown, saves money, avoids commuting, being safe during a pandemic situation, one can participate in classes if sick, etc.), disadvantages of online classes (e.g., not feasible for clinical classes and lab works, lack of social interactions, lack of group study, long screen time, lack of after class peer discussion, lack of engagement, etc.), and also scopes of improvements (e.g., technological training for staff, recorded classes, technological orientation for students, more engaging contents, online support, more interactive lessons, short duration of the class, break after 30-45 minutes and also teachers training for online facilitation, etc.). In Bangladesh, the online teaching-learning method is not a regular practice. Most of the institutions were forced to adopt this method on very short notice because of the COVID-19 pandemic lockdown. Online education in a clinical subject like dentistry requires a special training program, online content preparation, and interactive lesson delivery setup which are big challenges for a re-source-constrained medical education setup. The focus group discussion unveiled some key issues which indicated that there are many scopes for improvement in online teaching methods. With the help of the medical education department and through faculty development the online learning sessions can be made attractive as well as beneficiary for the key stakeholders.

Diabetes mellitus and dental caries (tooth decay) are not only common Non Communicable Diseases (NCDs) contributing to high burden of diseases but costly diseases to manage. Diabetes mellitus is a leading cause of mortality and reduced life expectancy across the globe. Early child hood dental caries (ECC) denotes a common chronic childhood disease and cariogenic dietary patterns dominated by refined sugar is one of the main causative factors. Thus, high burden of ECC could be a proxy indicator of excessive refined sugar consumption of a child. If such unhealthy dietary patterns are continued through to adolescent to adulthood, there is a high probability of an individual becoming a diabetic. Therefore, it is rational to argue high ECC burden in a country could be an indicator of future burden of diabetes. Moreover, ECC provides a critical period and a window of opportunity across life-course perspective, to intervene with cariogenic dietary patterns underpinned by common risk factor approach. This could be achieved by tailored dietary counseling for parental care givers of children with ECC. A healthy dietary pattern fostered in the childhood, most probably would continue to adulthood which may become beneficial in reducing the incidence of diabetes. Against this backdrop, we provide a perspective from Sri Lanka: a lower-middle-income country (LMIC) which records the highest prevalence of diabetes and pre-diabetes in south Asia. Our perspective will provide novel insights and innovative ideas into prevention and control of diabetes burden in LMICs, harnessing the potential of preventive dentistry.

Background and Purpose: Open-source Artificial intelligence (AI) applications are fast transforming access to information and allow students to prepare assignments and offer quite accurate responses to a wide range of exam questions which are routinely used in assessments of students across the board including undergraduate dental students. This study aims to evaluate the performance ChatGPT, an AI-based application, on a wide range of dental assessments and discusses the implications for undergraduate dental education. Methods: This was an exploratory study investigating the accuracy of ChatGPT to attempt a range of recognized assessments in undergraduate dental curricula. ChatGPT was used to attempt ten items based on each of the five commonly used question formats including single-best answer (SBA) multiple-choice questions (MCQs); short answer questions (SAQs); short essay questions (SEQs); True/False questions and fill in the blanks items. In addition, ChatGPT was used to generate reflective reports based on multisource feedback (MSF); research methodology; critical appraisal of the literature. Results: ChatGPT application provided accurate responses to majority of knowledge-based assessments based on MCQs, SAQs, SEQs, Tue/False and fill in the blanks items. However, it was only able to answer text-based questions and did not allow processing of questions based on images. Responses generated to written assignments were also of good quality apart from those for critical appraisal of literature. Word count was the key limitation observed in outputs by ChatGPT as it was only able to produce reports limited to approximately 650 words. Conclusion: Notwithstanding their current limitations, AI-based applications have the potential to revolutionize virtual learning. Instead of treating it as a threat, dental educators need to adapt teaching and assessments in dental education to the benefits of the learners whilst mitigating against dishonest use of AI-based applications.

Caries is a prevalent oral disease that primarily affects children and teenagers. Advances in ma-chine learning have caught the attention of scientists working with decision support systems to predict early tooth decay. Current research has developed machine learning algorithm for caries classification and reached high accuracy especially in ML for image data. Unfortunately, most studies on dental caries only focus on classification and prediction tasks, meanwhile dental carries prevention is more important. Therefore, this study aims to design an efficient feature for decision support system machine learning based that can identify various risk factors that cause dental caries and its prevention. The data used in the research work was obtained from the 2018 Korean Children's Oral Health Survey, which totaled nine datasets. The experimental results show that combining the mRMR and GINI Feature Importance methods when training with the GBDT model achieved the optimum performance of 95%, 93%, 99%, and 88% for accuracy, F1 score, precision, and recall, respectively. So, the proposed method has provided effective predictive model for dental caries prediction.

The transition from undergraduate dental student to the actual practicing dentist is a crucial phase and ensuring the preparedness of graduates for the complexity and demands of contempo-rary dental practice is a challenging task. This study aimed to evaluate the self-perceived prepar-edness of undergraduate dental students and house officers in the dental colleges of Pakistan. Cross-sectional national study was planned to collect the information from dental students and new graduates in Pakistan. The pre-validated Dental Undergraduates Preparedness Assessment Scale (DU-PAS) was used. Purposive sampling technique was utilized to recruit house officers and undergraduate dental students from 27 dental schools in Pakistan. The data analysis was car-ried out using the R statistical environment for Windows (R Core Team, 2015). The total of 862 responses with 642 females and 219 males were analyzed in the study. Overall, clinical skills score was 30.56+9.08 and score for soft skills was 30.54+10.6. The mean age of the participants was 23.42+1.28. Deficiencies were reported in various soft skills and clinical skills attributes.The results highlighted the strengths and weaknesses of dental students and new graduates in Pakistani den-tal institutions. The findings may be used to further develop and strengthen teaching and training of dental students in Pakistan.

This study reports results of focus groups with school nurses and teachers from elementary, middle, and high schools to explore their perceptions of child and adolescent oral health. Participants included 14 school nurses and 15 teachers (83% Female; 31% Hispanic, 21% White, 21% Asian, 14% African American, and 13% Others). Respondents were recruited from Los Angeles County schools and scheduled by school level for six one-hour focus groups, using Zoom. Audio recordings were transcribed, reviewed, and saved with anonymization of speaker identities. NVivo software was used to facilitate content analysis and identify key themes. The nurses’ rate of “Oral Health Education” comments statistically exceeded that of teachers, while teachers had higher rates for “Parental Involvement” and “Mutual Perception” “Need for Care” was perceived to be more prevalent in immigrants to the United States based on student behaviors and complaints. “Access to Care” was seen as primarily the nurse’s role. Strong relationships between community clinics and schools were viewed by some as integral to students achieving good oral health. The results suggest dimensions and questions important to item development for oral health surveys of children and parents to address screening, management, program assessment, and policy planning.

Aseptic implant loosening after total joint replacement is partially influenced by material-specific factors when cobalt-chromium alloys are used, including osteolysis induced by wear- and corrosion products, and stress shielding. Here, we aim to characterize a hybrid material consisting of alumina-toughened zirconia ceramics (ATZ) and additively manufactured Ti-35Nb-6Ta (TiNbTa), joined by a glass solder. The structure of the joint, static and fatigue shear strength, the influence of accelerated aging, and the cytotoxicity using an elution assay with human osteoblasts is characterized. Furthermore, the biomechanical properties of functional demonstrators of a femoral component for total knee replacements are evaluated. TiNbTa-ATZ specimens showed a homogenous joint with statistical distributed micro-pores and a slight accumulation of Al-rich compounds at the glass solder-TiNbTa interface. The static shear strength was 26.4 ± 4.2 MPa (Ti-ATZ reference: 38.2 ± 14.4 MPa, p = 0.117), all specimens survived 107 cycles of shear loading to 10 MPa, and aging did not reduce the strength. TiNbTa-ATZ did not impair the proliferation and metabolic activity of human osteoblasts. Functional demonstrators of TiNbTa-ATZ provided a maximum bearable extension-flexion moment of 40.7 ± 2.2 Nm. Biomechanical and biological properties of TiNbTa-ATZ demonstrate potential application for endoprosthetic implants.

(1) Background: OCT imaging has been used to assess enamel demineralization in dental research but is not yet developed enough to qualify as a diagnostic technique in clinics. The current capabilities of most commercial acquisition software allow for visual and qualitative assessment. There is a need for a fast and verified batch-processing algorithm for segmenting and analyzing the de-mineralized enamel. This study suggests a GUI MATLAB algorithm for processing and quantitative analysis of the demineralized enamel. (2) Methods: A group of artificially demineralized human enamels was in vitro scanned under the OCT, and ROI frames were extracted. By using a selected intensity threshold colormap, inter- (Ie) and intra- (Ia) prismatic demineralization can be segmented. A set of quantitative measurements for average demineralized depth, average line profile, and integrated reflectivity can be obtained for an accurate assessment. Real and simulated OCT frames were used for algorithm verification. (3) Results: A strong correlation between automated and known Excel measurements for the average demineralization depth was found (R² > 0.97). (4) Conclusions: OCT image segmentation and quantification of the enamel demoralization zones are possible. The algorithm can assess the future development of a real-time assessment of dental diagnostics using an oral probe OCT.

Introduction: Heat is a kinetic process whereby energy flows from between two systems; hot-to-cold objects. In oro-dental implantology, conductive heat transfer/(or thermal stress) is a complex physical phenomenon to analyze and consider in treatment planning. Hence, ample research has attempted to measure heat-production to avoid over-heating during bone-cutting and -drilling for titanium (Ti) implant-site preparation and insertion, thereby preventing/minimizing early (as well as delayed) implant-related complications and failure. Objective: Given the low bone-thermal conductivity whereby heat generated by osteotomies is not effectively dissipated and tends to remain within the surrounding tissue (peri-implant), increasing the possibility of thermal-injury; this work attempts to obtain an exact analytical solution of the heat equation under exponential thermal-stress, modeling transient heat transfer and temperature changes in Ti implants upon hot-liquid intake. Materials and Methods: We investigate the impact of the material, the location point along implant length, and the exposure time of the thermal load on temperature changes. Results: Despite its simplicity, the presented solution contains all the physics and reproduces the key features obtained in previous numerical analyses studies. To the best of knowledge, this is the first introduction of the intrinsic time, a “proper” time that characterizes the geometry of the dental implant, where we show, mathematically and graphically, how the interplay between “proper” time and exposure time influences temperature changes in Ti implants, under the suitable initial and boundary conditions. Conclusions: This work aspires to accurately complement the overall clinical diagnostic and treatment plan for enhanced bone-implant interface, implant stability and success rates, whether for immediate or delayed loading strategies.

INTRODUCTION: Breast sensibility following reconstruction surgery, though often overlooked, holds significant importance due to its widespread occurrence and profound effects on patients’ well-being and safety. Our objective is to compare the sensory outcomes between DIEP flap microsurgery reconstruction and implant-based reconstruction. Additionally, we explored the potential influence of sociodemographic and clinical factors on sensory recovery, along with assessing temperature discrimination abilities and evaluating quality of life. MATERIAL AND METHODS: We conducted an ambispective descriptive-analytical study, involving women who underwent mastectomy with reconstruction using either DIEP flap and implants at our hospital between 1990 and 2021. Data were collected from medical records, patient histories, physical examination, and validated quality of life questionnaires (BREAST-Q). RESULTS: A total of 99 women with breast reconstruction were included, 47 with DIEP flap and 52 with implants. Sensory recovery in implant-based reconstruction was found to be superior to DIEP flap reconstruction (5.03 and 5.18 respectively, p-value &lt;0.005). A direct correlation was observed between sensory improvement and thermal discrimination (Spearman coefficient 0.9, p-value &lt;0.001). Factors such as radiotherapy, delayed reconstruction with DIEP flap, and height with implants were associated with poorer sensory recovery in the breast. Women experiencing better breast sensibility reported higher satisfaction with their surgeon, medical team, and psychosocial quality of life. CONCLUSION: Women reconstructed with implants or DIEP abdominal flap exhibit suboptimal overall sensory recovery of the reconstructed breast, with slightly better outcomes observed in women reconstructed with implants.

The incidence of breast cancer and therefore need for breast reconstruction is expected to increase. The many reconstructive options available and the changing aspects of the field make this a complex area of plastic surgery, requiring knowledge and expertise. Two major types of breast reconstruction can be distinguished: Breast Implants and Autologous Flaps. Both present advantages and disadvantages. Autologous fat grafting is also commonly used. MRI is the modality of choice for evaluating breast reconstruction. Knowledge of the type of reconstruction is preferable to provide the maximum of pertinent information and avoid false positives. Early complications include seroma, hematoma, and infection. Late complications depend on the type of reconstruction. Implant rupture and implant capsular contracture are frequently encountered. Depending on the implant type, specific MRI signs can be depicted. In case of myocutaneous flap, fat necrosis, fibrosis and vascular compromise represent the most common complications. Late cancer recurrence is much less common. Rare reported late complications include breast implant associated large cell anaplastic lymphoma (BIA-ALCL) and, recently described and even rarer, Breast implant-associated squamous cell carcinoma (BIA-SCC). In this review article, the various types of breast reconstruction will be presented, with emphasis on pertinent imaging findings and complications.

The increase in the rate and prevalence of diseases associated with the localized and general loss of bone mass calls for an investigation into therapeutic alternatives that largely involve the de-velopment of new biomaterials and cell therapy, converting tissue bioengineering into a prom-ising option. An experimental model of a critical mandibular lesion in rats has been used to study bone re-generation by treating the ostectomy with the biomaterials Evolution® and Gen-Os® (OsteoBiol®, Italy) combined, or not, with dental pulp stem cells (DP-MSC). The results obtained through the Micro-CT and histological study reveal the almost complete re-covery of the lesion in the group with DP-MSC. These results are supported by increases in endoglin, TGF-β, protocollagen I, parathormone, and calcitonin, generating an environment of bone generation and development when combining Evolution® and Gen-Os® (OsteoBiol®, Italy) with DP-MSC. These promising results confirm the transcendental role of DP-MSC in combina-tion with osteogenic biomaterials for bone regeneration, and warrant further studies, including its assessment in clinical trials.

During pregnancy, profound physiological changes occur in the maternal body, including those affecting oral health. Dental stem cells (DSCs) have emerged as promising candidates for regenerative therapies in dentistry. This manuscript delves into the intricate interplay between DSC behavior and maternal oral health during pregnancy. We provide an overview of current knowledge concerning the impact of pregnancy on DSCs, highlighting their potential roles in maintaining oral homeostasis and responding to pathological conditions. Additionally, we identify key research gaps and propose future directions for investigating novel therapeutic strategies leveraging DSCs to improve maternal and fetal oral health outcomes. By elucidating this relationship, we aim to pave the way for innovative approaches in preventive and regenerative dentistry tailored to the unique needs of pregnant women.