The article explores Qualitative Comparative Analysis (QCA), an approach for establishing causal relationships between conditions and outcomes. QCA, applied in case studies and empirical analyses, facilitates generalizations for future research and addresses causal complexity by identifying various causal "recipes" leading to the same outcome. Three widely used QCA variants are Crisp-Set QCA (csQCA), Multi-value QCA (mvQCA), and Fuzzy-Set QCA (fsQCA), each with unique approaches. The article emphasizes the significance of bibliometric analysis in mapping a research field's intellectual structure, revealing key contributions and trends. In QCA, bibliometric analysis identifies leading researchers, affiliations, and influential countries. Results show QCA's widespread adoption across disciplines, with continuous growth in article production since 2013. The favored variant is fsQCA, followed by csQCA, and China notably contributes to QCA-related research. In conclusion, QCA proves a potent tool for discerning complex causal relationships in empirical studies, with its increasing interdisciplinary use indicating substantial potential for advancing scientific knowledge.

Addressing sustainable mobility in urban areas has become a priority in today’s society, given the growing population and increasing vehicular flow in these areas. Intelligent Transportation Systems have emerged as innovative and effective technological solutions to address these challenges. Research in this area has become crucial, as it contributes not only to improve mobility in urban areas, but also to positively impact the quality of life of its inhabitants. To address this, a dynamic clustering methodology for vehicular trajectory data is proposed which can provide an accurate representation of the traffic state. Data was collected for the city of San Francisco, a dynamic clustering algorithm was applied and then an indicator was applied to identify areas with traffic congestion. Several experiments were also conducted with different parameterizations of the forgetting factor of the clustering algorithm. The results showed in terms of precision that the dynamic clustering methodology achieved high match rates compared to the congestion indicator applied to static cells.

Electrical power quality is one of the main elements in power generation systems. At the same time, it is one of the most significant challenges regarding stability and reliability. Due to different switching devices in this type of architecture, different kinds of power generators, and non-linear loads are used for different industrial processes. As a result of this, the need to classify and analyze Power quality disturbance (PQD) to prevent and analyze the degradation of the system reliability affected by the non-linear and non-stationary oscillatory nature. This paper presents A Novel Mul-titasking Deep Neural Network (MDL) for the Classification and Analysis of Multiple Electrical Disturbances. The characteristics are extracted with a specialized and adaptive methodology for non-stationary signals, Empirical Mode Decomposition (EMD). The methodology’s design, devel-opment, and various performance tests are carried out with 28 different difficulty levels, such as severity, disturbance duration time, and noise in the 20 dB to 60 dB signal range. MDL was devel-oped with a diverse data set in difficulty and noise, with a quantity of 4500 records of different samples of multiple electrical disturbances. The analysis and classification methodology has an average accuracy percentage of 95% with multiple disturbances. In addition, an average accuracy percentage of 90% in analyzing important signal aspects for studying electrical power quality such as crest factor, Per Unit voltage analysis, Short Term Flicker Perceptibility (Pst), and Total Harmonic Distortion (THD), among others.

Knowing, with reasonable accuracy, the dry matter (DM) content of Hass avocado fruit will help determine when the fruit must be harvested. The reliability of predictive models based on near infrared spectra for DM quantification depends on the ability of the spectra to be representative of the DM gradient within a whole fruit. The aim of this work was to develop a methodology to determine the optimum number of spectra to develop a robust model for DM content quantification. Three spectra were recorded for each zone of the intact fruit: peduncle, equator, and base. Each scanning point was sampled, and the DM content was determined using oven drying. Two-way ANOVA confirmed the DM gradient within the whole fruit. This gradient was observed within spectra using the RMS (root mean square) criterion and PCA. The PLS models showed that at least one spectrum per zone could be enough to construct an efficient and robust model for dry matter quantification.

The center of gravity of a three-dimensional object found through an experimental method can be made easier and faster than when calculating the movement manually in order to make the movement in computer graphic images look more natural. In addition, in various sports such as skating, the score can be increased by appropriately moving the position of the center of gravity. Lastly, it is expected that it can be used even when the performance is high in the manufacturing process to increase the stability and speed of various means of transportation (eg, automobiles, airplanes, etc.).

Tidal stream energy, due to its high level of consistency and predictability, is one of the feasible and promising type of renewable energy for future development and investment. Applicability of Blade Element Momentum (BEM) method for modeling the interaction of turbines in tidal arrays has been proven in many studies. Apart from its well-known capabilities, yet there is scarcity of research using BEM for the modeling of tidal stream energy farms considering full scale rotors. In this paper, a real geographical site for developing a tidal farm in the southern coasts of Iran is selected. Then, a numerical methodology is validated and calibrated for the selected farm by analyzing array of turbines. A linear equation is proposed to calculate tidal power of marine hydrokinetic turbines. This methodology narrows down the wide range of turbine array configurations, reduces the cost of optimization and focuses on estimating best turbine arrangements in a limited number of positions.

This presentation is based on the article I wrote ((Lebese, 2018) where the A.C.A.I.D system was confirmed as directing human behavior in all situations. The A.C.A.I.D concept is an acronym. A stands for Attention, C for Consideration, A for Action, I for Internalisation and D for duplication. I developed the system over a period of twenty years as an impirical study, to answer a question: Why do I do what I do when I do what I do? Every behavior I exhibited followed specific steps from idea through to duplication. Once completed, I unobtrusively checked if other human beings behaved similarly. Without fail I observed that the A.C.A.I.D is a system that all humans knowingly and unknowingly follow. Through the system I could easily predict how the learners I was teaching could behave in particular situations. Also, I could assist learners who wanted change in their behaviors to know at what stage in the system that change was possible.The postgraduate scholar behaves in a predetermined manner in the research activity. Those behaviors follow an accepted protocol which invariably goes through all the stages of the A.C.A.I.D system. It starts with an idea through to the duplication step which I call “The idea on legs”. When it gets to this stage, it goes back to the beginning and sold as an idea. The system is cyclical.The A.C.A.I.D system as a framework helps the postgraduate researcher to follow an acceptable research praxis from idea interrogation through all the stages. This helps the researcher to follow acceptable predictable methodologis through research.

Bauxite residue is the voluminous by-product of alumina production after Bayer process. Its high alkalinity causes disposal problems and harmful environmental impacts. However, the residue contains significant amounts of valuable elements such as rare earth elements including scandium. Greek bauxite residue contains a high amount of scandium close to its main resources. Taking into account scandium limited availability coupled with its high demand in modern technology, bauxite residue could be considered as a potential resource for scandium recovery. In this study, the optimization of scandium extraction from bauxite residue with sulfuric acid is investigated using Taguchi methodology. Based on previous studies acid molarity, leaching time, solid/liquid ratio and reaction temperature were selected as control parameters for the selective Sc recovery. Method optimization targeted the highest concentration of scandium combined with the lowest concentration of iron without taking into account applications constraints. The predicted values resulted by Taguchi methodology were affirmed by a confirmation experiment conducted at optimal conditions. Regression analysis provided the respective equations to be applied on several conditions depending on different applications.

Abstract: In the Western of Mekong Delta belong to Vietnam a amount of alluvium sediments flows from upstream China to Vietnam, they are going from the river branches to in the Mekong Delta, then get out the Western Sea of Vietnam. This sediments accumulated gradually elevation the new land. The increase elevation of the land creates a fertile coastal plain where mangrove forests with a rich ecosystem of plants and animals. Over time, these forests change, with different plant species succeeding each other. This aims of this study to finding plant species in the forest, classification of forest types based on ecological regions, assessement the biodiversity of tree species, and compare the abundance communities, measuring the growth of the forest in these regions. In 2023, a comprehensive survey was conducted by using a systematic approach. The number of survey plots have done depend on the density of the forest, Base on the width of the forest range, the number of survey plots from 500m to 1,000m set up 1-2 plots, sub region set up from 10 to 15 plots. In total, 68 plots have done established in the erea, the area of plot is 100 square meters (10m x 10m). Using the statistical software in forestry to survey and analysis data. The result provided a complete picture of the tree species composition, distribution, and community structure characteristics in each ecological sub-region. The result of survey showed in the sub-region 1 have seven species as Sonneracia ovate, Rhzophora apiculata, Excoecaria agallochha, Avicennia officinalis, Avicennia alba, Agricerasvcoculatum, Bruguiera gymnorhiza. In the sub region 2 have eleven species as Sonneracia caseolaris, Annona reticulata, Lumnitzera littorea, Lumnizera racemosa, Rhizophora apiculata, Excoecaria agallocha, Avicennia officinalis, Avicennia alba, Hibiscus tillacerus, Bruguiera gymorhiza, Aericeras comiculatum. In the sub region 3 have eight as Sonratia caseolaris, Rhizophora mucronata, Rhizophora apiculata, Excoecaria agallocha, Avicennia marine, Avicennia alba, Bruguiera gymorhiza. In the region 4 have ten species as Sonneracia caseolaris, Sonneracia ovate, Lumnizera racemosa, Rhizophoa apiculata, Excoecaria agallocha, Avicennia marina, Avicennia officinalis, Aviecnnia alba, Bruguiera gymorhiza, Bruguiera cylindrica The total species of the mangrove forest in the Western Mekong Delta have 16 species from 11 plant families have been identified. Among these species have 6 dominant species include Avicennia oficinali),Avicennia alba, Rhizophora apiculata, Excoecaria agallocha, Someratia caseolaris, and Bruguiera yipamoriza. Two species easy grow on the new land are Avicennia officinalis Avicennia alba this findings show they can develope on the original new land for the shore of the Western Mekong Delta. The surveyed results also calculated the average of the height, diameter (D1.3), canopy, health of the nature mangrove tree for each sub region and total region. From these results showed the division of foresty structure, the structure of height, diameter (D1.3), canopy, vitality of the sub region and total region in the Western Mekong Delta.

Indigenous knowledge is proven to be one of the foundations of sustainable land and marine management. While indigenous knowledge is acknowledged as of important factors on maintenance of biodiversity of the planet, it also ensures the sustenance of social and economic system of indigenous community. To facilitate the application of indigenous knowledge on management of customary forest in Indonesia, since 2012, the Government of Indonesia has been providing formal access for indigenous communities to their forests to maintain forest sustainability and to enhance the welfare of indigenous community. Nonetheless, the achievement of sustainable development goals in the scope of forest and conservation area management is threatened by various competing interests and power imbalance, which mostly leads to conversion of naturally vegetated area, as well as the inability of the community to integrate new economic opportunities to its institution. Moreover, the Government of Indonesia has not been regulating the involvement of indigenous community on the management of conservation area. Most importantly, such a program provides no reference on indigenous community, especially on the assessment of authenticity of indigenous community’s forest. Cultural space methodology may fill the aforementioned gaps. The methodology was developed based on the notion of cultural space and land administration, particularly the people-and-land/marine space relationship. Moreover, such a methodology was also constructed based on the experiences of agricultural and maritime communities in Indonesia on the administration of their territories. The methodology provides a procedure to convert information on the interrelation of indigenous community, its cultural space in forest and conservation area, and indigenous knowledge into geospatial information and data that represent the cultural space unit as a geographic feature. Therefore, such methodology may be utilised to assess the authenticity of a long-existing relationship between a community, especially an indigenous one, and its land, particularly that serves conservational function.

The World Health Organization estimates that every year air pollution kills seven million people worldwide. As it is expected that climate change will affect future air quality patterns, the full understanding of the links between air pollution and climate change, and how they affect human health, are challenges of future research. In this scope, a methodology to assess the air quality impacts on health was developed. The WRF-CAMx modelling framework was applied for the medium-term future climate (considering the SSP24.5 scenario) and for the recent past (considered as baseline). Following the WHO recommendations, mortality health indicators were used to estimate health impacts of long-term exposures. For that, the Aveiro Region, in Portugal, was considered as a case study. Future climate results indicate the occurrence of higher temperatures, and lower total precipitation. Despite that, improvements in the main pollutants’ concentrations, and consequently in the reduction of the related premature deaths are foreseen, mainly due to the reduction of pollutants emissions imposed by the European legislation for the upcoming years. The applied approach constitutes an added value in this research field, being crucial to anticipate the effects of climate change on air quality and evaluate their impacts on human health.

The aim of this paper is to apply a new lane separation methodology for the maritime sector emissions attributed to the different vessel types and marine traffic loads in the Mediterranean and the Black Sea defined via the European Marine and Observation Data network (EMODnet), developed in 2016. This methodology is implemented for the first time on the Copernicus Atmospheric Monitoring Service Global Shipping (CAMS-GLOB-SHIP v2.1) nitrogen dioxide (NOX) emissions inventory, on the Sentinel-5 Precursor TROPOspheric Monitoring Instrument (TROPOMI) nitrogen dioxide (NO2) tropospheric vertical column densities and on the LOTOS-EUROS (LOng Term Ozone Simulation – EURopean Operational Smog) chemical transport model simulations. By applying this new, EMODnet-based lane separation method to the CAMS-GLOB-SHIP v2.1 emission inventory, we find that cargo and tanker vessels account for approximately 80% of the total emissions in the Mediterranean, followed by fishing, passenger, and other vessel emissions with contributions of 8%, 7% and 5%, respectively. Tropospheric NO2 vertical column densities sensed by TROPOMI for 2019 and simulated by the LOTOS-EUROS CTM have been successfully attributed to the major vessel activities in the Mediterranean; the mean annual NO2 load of the observations and the simulations reported for the entire maritime EMODnet-reported fleet of the Mediterranean is in satisfactory agreement, 1.26 ± 0.56x1015 molecules cm-2 and 0.98 ± 0.41x1015 molecules cm-2, respectively. The spatial correlation of the annual maritime NO2 loads of all vessel types between observation and simulation ranges between 0.93 and 0.98. On seasonal basis, both observations and simulations show a common variability. The winter-time comparisons are in excellent agreement for the highest emitting sector, cargo vessels, with the observations reporting a mean load of 0.98 ± 0.54 and the simulations of 0.81 ± 0.45x1015 molecules cm-2 and correlation of 0.88. Similarly, the passenger sector reports 0.45 ± 0.49 and 0.39 ± 0.45x1015 molecules cm-2 respectively, with correlation of 0.95. In summertime, the simulations report a higher decrease in modelled tropospheric columns than the observations, however still resulting in a high correlation between 0.85 and 0.94 for all sectors. These encouraging findings will permit us to proceed with creating a top-down inventory for NOx shipping emissions using S5P/TROPOMI satellite observations and a data assimilation technique based on the LOTOS-EUROS chemical transport model.

The attention to sustainable-related issues has grown fast in recent decades. The experience gained with these themes reveals the importance of considering this topic in the construction industry, which represents an important sector in the world. This work consists on conducting a multicriteria analysis of four cement powders, with the objective of calculating and analysing the environmental, human health and socio-economic effects of their production processes. The economic, technical, environmental and safety performances of the examined powders result from official, both internal and public, documents prepared by the producers. The Analytic Hierarchy Process permitted to consider several indicators (i.e. environmental, human health related and socio-economic parameters) and to conduct comprehensive and unbiased analyses which gave the best, most sustainable cement powder. As assumed in this study, the contribution of each considered parameter to the overall sustainability has a different incidence, therefore the procedure could be used to support on-going sustainability efforts under different conditions. The results also prove that it is incorrect to consider only one parameter to select the ‘best’ cement powder, but several impact categories should be considered and analysed if there is an interest for pursuing different, often conflicting interests.

To accurately predict the matching relationships between the various components and the engine performance in the whole aero-engine environment, this study introduces a two-dimensional throughflow simulation method for the whole aero-engine. This method is based on individual throughflow solvers for the turbo-machinery and the combustor. It establishes a throughflow simulation model for the whole engine by integrating with the compressor-turbine co-operating equations and boundary conditions. The turbo-machinery throughflow solver employs a circumferentially averaged form of the time-dependent Navier-Stokes equations (N-S) as the governing equation. The combustor solver uses the Reynolds Average Navier-Stokes (RANS) method to solve flow and chemical reaction processes by constructing turbulence, combustion, and radiation models. The accuracy of the component solver is validated using Pratt & Whitney’s three-stage axial compressor (P&W3S1) and General Electric’s high-pressure turbine (GE-EEE HPT), and the predicted results are consistent with the experimental data. Finally, the developed throughflow method is applied to simulate the throttling characteristics of the WZ-X turboshaft engine. The results predicted by the throughflow program are consistent with the GasTurb calculations, including the trends of shaft power delivered, specific fuel consumption (SFC), inlet airflow, and total pressure ratio of the compressor. The developed method to perform throughflow simulation of the whole aero-engine eliminates the dependence on a general component map. It can quickly obtain the meridian flow field parameters and overall engine characteristics, which is expected to guide the design and modification of the engine in the future.

A capacity to reflect on experience and learn through it (reflective and reflexive practice) is deemed an essential part of ethical practice and research. Challenging traditional research approaches this arts-based, inter-disciplinary, Ph.D. project explores artistic practice as a research methodology, and how learning through experiences of ‘making’ things may enhance and amplify our understanding of the more affective aspects of human situations and experience. Grounded in the author’s artistic practice and learning through experiences of ‘making’, the author assembles and adapts frames from psychoanalysis, art (psycho)therapy, and the arts with/through which to observe and document their experience of an organisational situation. Describing the development of their method in three phases, analysis takes place through returning to revisit and rework artistic material produced, and engaging in conversation with the emergent material and others in response. Results take the form of artworks and artistic projects, including documentation of process. Emergent threads draw attention to the speculative, entangled, and affective nature of the research process, the reflexivity generated through moving and handling material, and the reflexive work of undergoing, foregrounding an ethics of responsibility, attention, and care for/of the body. As a space for imaginative encounter and performative enactment, and a site for reflexivity through which one may be pressed to notice and feel more acutely, the author argues that the research value resides in the capacity of this method to embrace complex relationalities, and engage our affective, ethical sensibilities in ways that may not emerge through more traditional approaches to reflective/reflexive practice(s). This has implications for both art therapy practice and research, amplifying the learning opportunities afforded by moving, modifying, and assembling things differently, the embodied ‘work’ of art as a method of enquiry, the cultural sensitivity of documentary fragments captured in/through various media and voices, and the value of collaborative endeavours where meaning is co-constructed in conversation.

Maritime ports represent an important ecosystem for pollutant emissions and, taking into account the ongoing energy transition, need to adopt new solutions to mitigate current emission levels. These emissions are partially avoidable if ships and vessels docked at the port use electric energy to feed their internal power needs instead of using their internal combustion engines. In Europe, there is an ongoing discussion on including such emissions in the European Emissions Trading System which will represent added costs for maritime operators. Onshore Power Supply systems can contribute to the ongoing energy transition by allowing the use of electric power to feed docked ships. As a first step to contribute to the development of Onshore Power Supply solutions, it is necessary to evaluate the added power needs that these systems would represent for the port. This paper presents a methodology that allows port operators to verify, straightforwardly and transparently, their power needs for Onshore Power Supply applications. The methodology is based on the historical data of docked ships at the port or quay level and provides an energy analysis of each type of vessel to determine the power to be installed at the port so that it is possible to supply energy to different types of ships and vessels simultaneously. Additionally, the implemented methodology provides economic and technical decision support factors by comparing the fuel costs with electric power costs, assessing the potential for this transition to Onshore Power Supply. The methodology is validated using a real case study for the port of Lisbon and obtained results demonstrate the potential for the installation of Onshore Power Supply in medium to large-dimension maritime ports.

Tourism gentrification presents issues of privatization of public space, the transformation of public services to cater to tourists, the erosion of community social bonds, and the commodification of regional consumption, which has far-reaching impacts on the well-being of local residents and a desire to relocate. Thus, tourism gentrification in traditional industrial areas is defined as a process driven by the reconfiguration of spatial functions and the transformation of service provisions, resulting in displacement. This study employs Q methodology aims to understand the residents’ perceptions of tourism gentrification with a specific focus on the 798 Industrial Art Zone in Beijing, China. The results reveal four dimensions that form residents’ stress: neighboring environment, community attachment, economic interest, and cultural identity. Based on the stress threshold theory, this study further proposes a framework to explain the decision-making processes of residents in relation to their intent to relocate due to stress from interactions with migrants and visitors and changes in the place functions of industrial areas and communities. The findings offer valuable theoretical knowledge surrounding tourism gentrification from residents’ perspectives and suggest practical guidance for policymakers and destination managers in reducing residents’ stress and promoting sustainable development of industrial tourism.

The way in which a person walks, known as human gait, is a significant indicator of overall health and well-being. Abnormalities in gait can indicate the presence of metabolic disorders, such as diabetes or obesity. However, detecting these disorders can be challenging using traditional methods, which often involve subjective assessments or invasive procedures. In this study, a novel methodology known as Criticality Analysis (CA) was proposed for the detection and monitoring of human gait in people with metabolic disorders taking part in an intervention to increase activity and reduce weight. The CA approach utilised inertial measurement unit gait data, alongside clinical health measures. This allows for the control of nonlinear growth in the system, resulting in lower dimensional, nonlinear, free-scale, stable, controlled, and organised trajectories. These trajectories were then analysed using a Support Vector Machine (SVM) algorithm, which is well-suited for this task due to its ability to handle nonlinear and dynamic data. The combination of the CA approach and the SVM algorithm demonstrated high accuracy and non-invasiveness in detecting metabolic disorders, yielding an average accuracy within the range of 78.2% to 90%. Additionally, the classification technique accuracy, at a group level was observed to reduce during period of the intervention (e.g., from week 2 to week 3) alongside changes in fitness and health, which indicates the potential of using the approach to measure and monitor biological systems. As such, this novel methodology has the potential to be a valuable tool for healthcare professionals in detecting and monitoring metabolic disorders, as well as other unknown diseases associated with the human biological system.

To effectively estimate airport terminal area capacity and assess the maximum throughput the sector can achieve when the capacity is given, this research proposes an approach to assess the terminal area capacity from the viewpoint of service provision resources. Terminal area capacity is optimized based on the equilibrium of air traffic service resource supply and demand. The supply-demand nexus is examined in consideration of terminal area route structure, traffic flow characteristics, and safety regulations. A flight service probability matrix and a terminal area demand and supply service time model are constructed to quantify resource expenditure at varied capacity levels. A optimization model is then developed to apportion maximal capacity under resource limitations. Model computation and computation results demonstrate the deviation between estimated and amended capacities is under 0.3 flight sorties per hour. The outcomes are congruent with historical statistics, thereby validating the accuracy and reliability of the model proposed in this study. Given capacity parameters, the model can deduce the maximal aircraft quantity served concurrently in terminal areas during peak periods. These revelations indicate the submitted model furnishes theoretical foundation and reference for terminal area sector partition and traffic alerting.

The increased complexity of modern systems is calling for an integrated and comprehensive approach to system design and development and in particular, a shift towards Model-Based Systems Engineering (MBSE) approaches for system design. The requirements that serve as the foundation for these intricate systems are still primarily expressed in Natural Language (NL), which can contain ambiguities and inconsistencies that hinder their direct translation into models. The colossal developments in the field of Natural Language Processing (NLP) in general and Large Language Models (LLMs) in particular can serve as an enabler for the conversion of NL requirements into semi-machine-readable requirements. This is expected to facilitate their standardization and use in a model-based environment. This paper discusses a two-fold strategy for converting NL requirements into semi-machine-readable requirements using language models. The first approach involves creating a requirements table by extracting information from free-form NL requirements. The second approach is an agile methodology that facilitates the identification of boilerplate templates for different types of requirements based on observed linguistic patterns. For this study, three different LLMs were utilized. Two of these models were fine-tuned versions of Bidirectional Encoder Representations from Transformers (BERT), specifically aeroBERT-NER and aeroBERT-Classifier, which were trained on annotated aerospace corpora. Another LLM, called flair/chunk-english, was utilized to identify sentence chunks present in NL requirements. All three language models were utilized together to achieve the standardization of requirements. To demonstrate the effectiveness of the methodologies, requirements from Parts 23 and 25 of Title 14 Code of Federal Regulations (CFRs) were employed, and a total of two, five, and three boilerplate templates were identified for design, functional, and performance requirements, respectively.

Innovative practices in irrigation systems can bring improvements in terms of economic efficiency and in the same time can reduce environmental impact. Investment in high tech technologies frequently involves additional costs, but an efficient water management can increase the lifetime of the equipment. The main objective of this article is to reduce the energy consumption by one thousand cubic meters pumped and automatically to increase the economic efficiency of the pumping groups. This paper develops a new operating algorithm that ensures the operation of the pumping group at safe operating intervals and in the same time identifies the equivalent pump operating points for the entire flow range and pumping height of the pumping group. This methodology is based on the principles of an Expert System to perform the optimization process of the energy consumption in pumping groups. The resulting methodology avoids the combinatorial explosion of the solutions to be analyzed and determines the point of maximum efficiency without violation of any of the system constraints under any operating condition. The proposed methodology is tested on an irrigation system that includes a pumping group with 5 pumps, showing its effectiveness in obtaining the optimal solution with a relatively low computational burden.

Human exposure to infectious aerosols results a transmission of diseases, such as influenza, tuberculosis, and COVID-19. Most dental procedures generate a significant number of aerosolized particles, increasing transmission risk in dental settings. Since the generation of aerosols in dentistry is unavoidable, many clinics started using intervention strategies such as area-filtration units and extraoral evacuation equipment, especially under the relatively recent constraints of the pandemics. However, the effectiveness of these devices in dental operatories has not been studied. Therefore, the dental personnel's ability to position and operate such instruments efficiently is also limited. To address these challenges, we utilized a real-time sensor network for assessment of aerosol dynamics during dental restoration and cleaning producers with and without intervention. The strategies tested during the procedures were (i) local area high-efficiency particle air (HEPA) filters and (ii) extra-oral suction device (EOSD). The study was conducted at the University of Washington School of Dentistry using a network of thirteen fixed sensors positioned within the operatory and one wearable sensor worn by the dental operator. The sensor network provides time and space-resolved particulate matter (PM) data. Three-dimensional (3D) visualization informs aerosol persistence in the operatory. It was found that area filters did not improve the overall aerosol concentration in dental offices significantly. An average of 16% decrease in PM concentration was observed when EOSD equipment was used during the procedures. The combination of real-time sensors and 3D visualization can provide dental personnel and facility mangers with actionable feedback to effectively assess aerosol transmission in medical settings and develop evidence-based intervention strategies.

Dump design and scheduling are critical elements to effective mine planning, especially if several of them are required in large-scale open pit mines. Infrastructure capital and transportation costs are considerable from an early stage in the mining project, and through the life-of-mine as these dumps gradually become immense structures. Delivered mining rates, as well as certain spatial and physical constraints, provide a set of parameters of mathematical and economic relationship that creates opportunities for modelling and thus facilitates the measuring and optimization of ultimate dump design by using programming and empirical techniques while achieving economic objectives. This paper presents a methodology to model and optimize the design of a mine dump by minimizing the total haulage costs. The proposed methodology consists on: (i) Formulation of a dump model based on a system of equations relying on multiple relevant parameters; (ii) Solves by minimizing the total cost using linear programming and determines a ‘preliminary’ dump design; (iii) Through a series of iterations, modifies the ‘preliminary’ footprint by projecting it to the topography and creates the ultimate dump design. Finally, an example application for a waste rock dump illustrates this methodology.

A distinction is made between data rescue (i.e., copying, digitizing and archiving) and data recovery that implies deciphering, interpreting and transforming early instrumental readings and their metadata to obtain high-quality datasets in modern units. This requires a multidisciplinary approach that includes: palaeography and knowledge of Latin and other languages to read the handwritten logs and additional documents; history of science to interpret the original text, data e metadata within the cultural frame of the 17th, 18th and early 19th century; physics and technology to recognize bias of early instruments or calibrations, or to correct for observational bias; astronomy to calculate and transform the original time in canonical hours that started from twilight. The liquid-in-glass thermometer was invented in 1641 and the earliest temperature records started in 1654. Since then, different types of thermometers were invented, based on the thermal expansion of air or selected thermometric liquids with deviation from linearity. Reference points, thermometric scales, calibration methodologies were not comparable, and not always adequately described. Thermometers had various locations and exposures, e.g., indoor, outdoor, on windows, gardens or roofs, facing different directions. Readings were made only one or a few times a day, not necessarily respecting a precise time schedule: this bias is analysed for the most popular combinations of reading times. The time was based on sundials and local Sun, but the hours were counted starting from twilight. In 1789-90 Italy changed system and all cities counted hours from their lower culmination (i.e., local midnight), so that every city had its local time; in 1866, all the Italian cities followed the local time of Rome; in 1893, the whole Italy adopted the present-day system, based on the Coordinated Universal Time and the time zones. In 1873, when the International Meteorological Committee (IMO) was founded, later transformed in World Meteorological Organization (WMO), a standardization of instruments and observational protocols was established, and all data became fully comparable. In the early instrumental period, from 1654 to 1873, the comparison, correction and homogenization of records is quite difficult, mainly because of the scarcity or even absence of metadata. This paper deals about this confused situation, discussing the main problems, but also the methodologies to recognize missing metadata, distinguish indoor from outdoor readings; correct and transform early datasets in unknown or arbitrary units into modern units; finally, in which cases it is possible to reach the quality level required by WMO. The focus is to explain the methodology needed to recover early instrumental records, i.e., the operations that should be performed to interpret, correct, and transform the original raw data into a high-quality dataset of temperature, usable for climate studies.

Hillslope and mountain roads are often the source of erosion, which in turn can lead to larger landslides and other types of mass-movements. For this reason, low-cost repeat surveys that can be done by practitioners and not solely scientists and engineers is essential. To solve this issue the present contribution shows the testing and applicability of a mix of SfM-MVS and low-cost SLAM technology to provide erosion information. The low-cost SLAM generated between 300 ~ 900 points per square meter, while SfM-MVS created between ~11,000 to 900,000 points. The density is however a trade-off against a spatially varying error, although the variability at the road-cut scale only ranges from 2 cm vertically to 2.5 cm in x,y,z based on the C2C algorithm. Furthermore, this error tends to be more important in the higher section of the cutout (further away from the sensor and at a flatter angle). It is thus possible to measure small-scale roadside change, providing that the change is in the range of >5 cm (adding the maximum potential error twice) and providing that the road-cut is such that the sensors can be brought close to the surface (camera or sensor on a pole). The authors suggest that it can be a solution for state and agencies with limited funding and that cannot afford regular laser or for roadside that are difficult to access.

The constant increase in volume and wide variety of available Internet of Things (IoT) devices leads to highly diverse software and hardware stacks, which opens new avenues for exploiting previously unknown vulnerabilities. The ensuing risks are amplified by the inherent IoT resource constraints both in terms of performance and energy expenditure. At the same time, IoT devices often times generate or collect sensitive, real-time data used in critical application scenarios (e.g. health monitoring, transportation, smart energy, etc.). All these factors combined make IoT networks a primary target and potential victims for malicious actors. In this paper, we present a brief overview of existing attacks and defense strategies against urban IoT networks. The goal of this work is twofold: First, it presents a summary of some of the common attack vectors and the corresponding solutions available in the research literature. Then, the paper lays out a theoretical plan and a corresponding pipeline of steps (i.e. development and implementation process) for the design and application of the solutions encountered throughout the course of the research efforts. The end goal of following this plan is the deployment of the proposed IoT security measures in a real-world urban IoT infrastructure.

Brain-stimulation reward, also known as intracranial self-stimulation (ICSS), is a commonly used procedure for studying brain reward function and drug reward. In electrical ICSS, an electrode is surgically implanted into the medial forebrain bundle in the lateral hypothalamus or the ventral tegmental area in the midbrain. Operant lever responding leads to the delivery of electrical pulse stimulation. The alteration in the stimulation frequency-lever response curve is used to evaluate the impact of pharmacological agents on brain reward function. If a test drug induces a leftward or upward shift in the ICSS response curve, it implies a reward-enhancing or abuse-like effect. Conversely, if a drug causes a rightward or downward shift in the functional response curve, it suggests a reward-attenuating or aversive effect. A significant drawback of electrical ICSS is the lack of cellular selectivity in understanding the neural substrates underlying drug reward versus aversion. Excitingly, recent advancements in optical ICSS (oICSS) have facilitated the development of at least three cell type-specific oICSS models – dopamine-, glutamate-, and GABA-dependent oICSS. In these new models, a comparable frequency-rate response curve has been established and employed to study the substrate-specific mechanisms underlying brain reward function and a drug's rewarding versus aversive effects. In this review article, we summarize recent progress in this exciting research area. The findings in these new behavioral models have not only increased our understanding of the neural mechanisms underlying drug reward and addiction but have also introduced a novel experimental approach in preclinical medication development for treating substance use disorders.

The implementation of sustainable practices, such as the use of renewable sources and efficient technologies, is crucial for reducing climate change. Energy efficiency is highly important on a global scale due to its relationship with climate change, aiming to minimize environmental impact. In Spain, renewable energy policies have increased self-sufficiency and reduced the use of fossil fuels. Optimizing energy consumption in residences, buildings, and industries is essential for improving efficiency. This was taken into consideration for conducting this study, focusing on the residential sector. The desire to understand the level of energy efficiency in Extremadura drove this project, which focuses on collecting and analyzing data on a set of homes located in the au-tonomous community of Extremadura, with the purpose of evaluating their energy efficiency. To achieve this, a computer tool will be employed to provide a detailed view of the different levels of energy efficiency present in the community. In addition to data collection and analysis, research will be conducted to identify areas for improvement. This will allow proposing a series of specific measures that users can implement to optimize energy efficiency in their homes, adapting them to the particular characteristics of each residence.

Human activities continue to degrade oceanic, coastal and inland waters. The generational change in the role of society in actively looking after the health of water resources can be achieved through the expansion of ocean and water literacy in schools. The Network of European Blue Schools established under the EU4Ocean Coalition for Ocean Literacy has improved ocean and water literacy; however, this Network needs to grow and be supported. Here we present ProBleu; a recently funded EU project that will expand and support the Network, partly through the use of citizen science. The core of the proposed methodology is facilitating school activities related to ocean and water literacy through funding calls to sustain and enrich current school activities, and kick-start and support new activities. The outcomes of the project are anticipated to have wide and long-term impacts across society, oceanic, coastal and inland water environments.

Green Infrastructures (GI) are considered key to reconcile ecological and social benefits by providing multiple functions. The concept is increasingly promoted and guidelines for its implementation have been developed in many countries and regions of the Western Hemisphere. However, for other parts of the world, especially for countries with less developed infrastructures, promotion, guidance for decision-making and manuals for GI are often lacking. But the state of infrastructure development and often unplanned character of settlements in the Global South differ and result in specific constraints as well as demands to GI that need to be addressed explicitly. This study presents a methodological approach to explicitly address the specific conditions and physical limitations to GI development in urban areas of the Global South. A four step methodology was developed to assess the implementation potential for retrofitted and multifunctional urban green infrastructure in public areas. An initial site analysis (1) and the definition of design criteria as well as general strategies (2) to achieve the different dimensions of multi-functionality are the basis to derive spatial typologies (3) for GI elements and finally the spatial suitability assessment for potential placements (4). An application of the methodology to a study area in the metropolitan region of San José, Costa Rica, shows exemplarily that the potential to improve the hydrological conditions (up to 34% of surface runoff reduction), ecological conditions (increase of green space by 2,2 %, creation of 1500 m length of roadside greenery and two new habitat types), and social conditions (2.200 m of road type upgrading) of multi-functionality of the site through Green Infrastructures. These assessment results of different multi-functionality dimension can serve as a guidance for GI promotion and implementation in urban areas of the Global South.

A methodology is proposed for designing the stabilization process of polyacrylonitrile (PAN) fibers. In its core, this methodology is based on a model that describes the characteristic fiber length change during the treatment, through the de-convolution of the three main contributors (i.e. entropic shrinkage, creep, and chemical shrinkage). The model has the additional advantage of offering further insight into the physical and chemical phenomena taking place during the treatment. Validation of PAN-model prediction performance for different processing parameters was achieved as demonstrated by FTIR and DSC. Τensile testing revealed the effect of processing parameters on fiber quality, while model prediction demonstrated that ladder polymer formation is accelerated at temperatures over 200oC. Additionally, according the DSC and FTIR measurements predictions from the application of the model during stabilization seem to be more precise at high-temperature stabilization stages. It was shown that mechanical properties could be enhanced preferably by including a treatment step below 200oC, before the initiation of cyclization reactions. Further confirmation was provided via Raman spectroscopy, which demonstrated that graphitic like planes are formed upon stabilization above 200oC, and thus multistage stabilization is required to optimize synthesis of carbon fibers. Optical Microscopy proved that isothermal stabilization treatment did not severy alter the cross section geometry of PAN fiber monofilaments.

In this study, the optimal condition for the extraction of antioxidants from the fruit Buah Mahkota Dewa (Phaleria macrocarpa) was determined by using Response Surface Methodology (RSM). The optimization was applied using central composite design (CCD) to investigate the three independent variables, namely extraction temperature (^oC), extraction time (minutes) and extraction solvent to-feed ratio (%v/v) on the responses of free radical scavenging activity (DPPH), ferric ion reducing power assay (FRAP), total phenolic content (TPC) and total flavonoid content (TFC).The optimal conditions for the antioxidants extraction were found to be extraction temperature (64^oC), extraction time (66 minutes) and solvent to-feed ratio (75 %v/v) with the highest percentage yield of DPPH, FRAP, TPC and TFC were 86.85%, 7.47%, 292.86 mg/g and 3.22 mg/g respectively. Moreover, the data were subjected to response surface methodology (RSM) and the results showed that the polynomial equations for all models were significant, did not show lack of fit, and presented adjusted determination coefficients (R²) above 99%, proving the yield of phenolic, flavonoid and antioxidants activities obtained experimentally were close to the predicted values and the suitability of the model employed in RSM to optimize the extraction conditions. Hence, in this study, the fruit from P.macrocarpa could be considered to have the strong antioxidant ability and can be used in various cosmeceutical or medicinal applications.

Objectives We tested the hypothesis that poor adherence is associated with a greater risk of alcohol-caused mortality and morbidities within the first year of discontinuing this medication. Materials and Methods Retrospective cohort study of 3319 individuals who received Acamprosate® in the East of Scotland in a 10-year period using a health informatics approach with record linkage of dispensing data, hospital utilization (SMR) and General Register Office of Scotland (GROS) data. Primary outcome was adherence between one to six months of initiating Acamprosate® medication. Secondary outcome was all cause morbidities and mortality. Results Of the total 3319 individuals identified, good adherence index of >80% was found in 59% of those prescribed Acamprosate® after three months and 6% after six months. There were significant linear trends of poorer adherence with increased risk of alcohol-caused mortality (HR1.2), medical morbidities especially neoplasm (HR 4.1|) and poisoning (HR 1.4) and psychiatric morbidities especially stress (HR 35.1), psychotic (HR 5.6) and neurotic disorders and directly alcohol induced conditions (7.4 HR) after adjustment for other factors within a one-year period of initiation of Acamprosate® treatment. Discussion and Conclusions Further exploratory studies using this digitalized approach should be encouraged in order to capture role of compliance to Acamprosate® and other types of medication that are known to reduce relapse into alcohol dependence and its direct relationship to mortality and morbidities in this population.

In this paper an integrated methodology for the coupling between 1D- and 3D-CFD simulation codes is presented, which has been developed to support the design and calibration of new diesel engines. The aim of the proposed methodology is to couple 1D engine models, which may be available in the early-stage engine development phases, with 3D predictive combustion simulations, in order to obtain reliable estimates of engine performance and emissions for newly designed automotive diesel engines. The coupling procedure features simulations performed in 1D-CFD by means of GT-SUITE and in 3D-CFD by means of Converge, executed within a specifically designed calculation methodology. An assessment of the coupling procedure has been performed by comparing its results with experimental data acquired on an automotive Diesel engine, considering different working points including both part load and full load conditions. Different multiple injection schedules have been evaluated for part-load operation, including pre and post injections. The proposed methodology, featuring detailed 3D chemistry modeling, was proven to be capable to properly assess pollutant formation, specifically to estimate NOx concentrations. Soot formation trend was also well-matched for most of the explored working points. The proposed procedure can therefore be considered as a suitable methodology to support the design and calibration of new Diesel engines, thanks to its ability to provide reliable engine performance and emissions estimations from the early-stage of a new engine development.

One of the challenges in the healthcare sector is making accurate forecasts across insurance years for claims reserve. The state-of-the-art envisages various methods for estimating the claims reserve but without being applied to systems that do not present huge variability and heterogeneity, such as the healthcare sector. The methodology is based on generalized linear models using the Overdispersed Poisson distribution as shown in the state-of-the-art. In this context, we developed a method to estimate the parameters of the quasi-likelihood function using a Gauss-Newton algorithm optimized through a genetic algorithm. The genetic algorithm plays a crucial role in glimpsing the position of the global minimum to ensure a correct convergence of the Gauss-Newton method, where the choice of the initial guess is fundamental. The proposed methodology has been entirely developed using MATLAB and has been applied to estimate the claims reserve in the healthcare system of the Tuscany Region in Italy, as case study. The results obtained were validated by comparing them with the state-of-the-art by measuring the confidence intervals of the Overdispersed Poisson distribution parameters. Therefore local healthcare authorities could use the proposed and improved methodology to allocate the resources dedicated to healthcare and global management.

This paper summaries the main findings from the full-scale CFD analyses conducted at SINTEF Ocean on the case of MV REGAL, which is one of the benchmark vessels studied in the ongoing joint industry project JoRes. The numerical approach is described in detail, and comparative results are presented regarding the propeller open water characteristics, ship towing resistance, and ship self-propulsion performance. The focus of numerical investigations is on the assessment of the existing simulation best practices applied to a ship scale case in a blind simulation exercise, and performance of thereof with different turbulence modelling methods. The results are compared directly with full-scale performance predictions based on model tests conducted at SINTEF Ocean and sea trails data obtained in the JoRes project.

The aim of this review is to present the Quality by Design (QbD) model as a suitable methodology to perform research in the academic Costa Rican institutions that teach Pharmacy. Pubmed, Science Direct, and Google Scholar databases were screened for original and review papers, as well as short communications published not more than 10 years ago. Publications were screened by title and abstract. Relevant references were used to develop three important themes: The University’s Research Model in Costa Rica, QbD Model, and QbD as a Research Methodology for Industrial Pharmacy in the Academy. In this sense, the QbD model is a great methodology for carrying out research projects regarding Pharmaceutical Sciences but especially for Drug Development. Academic research based on this model enables training and developing practical, scientific, and leadership skills in pharmacy students. The generated knowledge can be shared in the classrooms, which represents an ideal environment to communicate their research results and to foster collaborative work between researchers, professors, and students. The participation of all these actors allows a high level of commitment to research work, which benefits the scientific advancement of the university and society. It is important to visualize the student body as potential key actors in the research process, encouraging in them the desire to become trained scientific researchers who want to pursue a career in the academy, giving continuity to it.

The paper proposes a novel methodology for the stabilization of shallow foundations, with a simplified model combined with 3D Electrical resistivity tomography (ERT-3D) and conso- lidation injections. To determine its usefulness, the method has been applied in a case located in Estepona (southern Spain). The chosen tomography model is the dipole-dipole configuration, with an optimized distance between electrodes of 0.80 m for a better visualization of the foundation subsoil; with this parameterization, a total of 72 electrodes were installed in the analyzed case. In this work, the depth of the anomaly in the building's supporting subsoil was detected ranging from 2.00 m to 3.90 m deep. The study also delineates areas of high resistivity variations (50-1,000 Ω m) in the middle and eastern end of the field. These data have been validated and corroborated with a field campaign. The results of the ERT-3D monitoring are presented, once the investment data has been processed with the RES3DINV software, from the beginning to the end of the stabilization intervention. The novelty occurs with the interaction between the tomography and the foundation consolidation injections, until the final stabilization; very useful methodology in case of emergency consolidation, where there is a need to minimize damage to the building. Thus, people using this combined system; will be able to practically solve the initial anomalies of the subsoil that caused the damages, in a non-invasive way, considerably lowering the value of the resistivities.

Machine learning is an established and frequently used technique in industry and academia but a standard process model to improve success and efficiency of machine learning applications is still missing. Project organizations and machine learning practitioners have a need for guidance throughout the life cycle of a machine learning application to meet business expectations. We therefore propose a process model for the development of machine learning applications, that covers six phases from defining the scope to maintaining the deployed machine learning application. The first phase combines business and data understanding as data availability oftentimes affects the feasibility of the project. The sixth phase covers state-of-the-art approaches for monitoring and maintenance of a machine learning applications, as the risk of model degradation in a changing environment is eminent. With each task of the process, we propose quality assurance methodology that is suitable to address challenges in machine learning development that we identify in form of risks. The methodology is drawn from practical experience and scientific literature and has proven to be general and stable. The process model expands on CRISP-DM, a data mining process model that enjoys strong industry support but lacks to address machine learning specific tasks. Our work proposes an industry and application neutral process model tailored for machine learning applications with focus on technical tasks for quality assurance.

Internet of Things (IoT) provides a huge business value for customers, organizations, and governments due to the developments of so many applications in different sectors like energy and healthcare. Nevertheless, as a new emerging technology, IoT faces several security concerns that are more challenging than conventional Internet because of its limited resources as well as its complex ecosystem. Toward this end, we first highlight IoT security challenges and briefly discuss its security goals like confidentiality and integrity. Second, we discuss the most common attacks against IoT, along with their violated security goals. We also review the existing frameworks of security and privacy guidelines for IoT and illustrate their shortcomings. Third, we propose a novel framework for securing IoT objects, the key objective of which is to assign different Security Level Certificates (SLCs) for IoT objects based on their hardware capabilities and protection measures. Objects with SLCs, therefore, will be able to communicate with each other or with the Internet in a secure manner. The proposed framework is composed of five main phases. In phase 1, we classify IoT assets into four components: (i) physical objects, (ii) protocols, (iii) data at rest, and (iv) software, which includes operating systems, middlewares, and applications. We also classify IoT objects into five categories based on their hardware capabilities. In phase 2, we propose security and privacy guidelines for previously mentioned IoT assets, along with their protection measures. In phase 3, we classify protection measures into five SLCs, and then we assign different SLCs for IoT objects. In phase 4: we develop a communication plan between objects based on their SLCs. In phase 5, we propose a four-step method to seamlessly integrate our objects with legacy objects ( objects are not developed according to our framework). Fourth, the feasibility and application of this framework are illustrated using smart homes as a case study. Finally, we investigate how our framework would lessen several attacks and threats against IoT like routing attacks and physical damage. We also provide qualitative arguments to show that this framework could be utilized to solve some of IoT security challenges such as tight resource constrains. Moreover, we discuss the shortcomings of our suggested framework.

This paper proposes a novel deterministic methodology for estimating the optimal sampling frequency (SF) of water quality monitoring systems. The proposed methodology is based on employing two-dimensional contaminant transport simulation models to determine the minimum SF considering all the potential changes in the boundary conditions of a water body. A two-dimensional contaminant transport simulation model (RMA4) was implemented to estimate the distribution patterns of the total dissolved solids (TDS) within the Al-Hammar Marsh in the southern part of Iraq for 30 cases of potential boundary conditions. Using geographical information system (GIS) tools, a spatiotemporal analysis approach was applied to the results of the RMA4 model to determine the minimum SF of the monitoring stations with an accuracy level of detectable change in TDS concentration (ALC) of 5%, 10% and 15%. The proposed methodology specified a minimum and maximum SF for each monitoring station (MS) that ranged between 12 and 33 times per year, respectively. Additionally, increasing the ALC to 10% and 15% increase the minimum SF for some MSs by approximately 18% and 21%, respectively. However, the proposed methodology includes all the potential values and cases of boundary conditions, which increases the certainty of monitoring the system and the efficiency of the SF schedule. Moreover, the proposed methodology can be effectively applied to all types of surface water resources.

Keyhole neurosurgery implies reaching a target area inside the brain through an entry point specified by the neurosurgeon. In order to avoid complications, a risk assessment procedure must be done to establish the minimum risk trajectory from the entry point to the target area. The neurosurgeon establishes the risk values for the brain structure according to the type of intervention. The preset brain structure risk value is used to assess the risk value for each voxel of the brain. This paper proposes an improved risk assessment methodology based on the sum of N maximum risk values for each voxel. Then, risk assessment for a trajectory is done by adding the risk of all voxels that are part of the path. The safest trajectory is defined as the trajectory with the lower risk. Our proposed search trajectory methodology includes a Genetic Algorithm (GA) for finding the safest trajectories. The use of a GA drastically reduces the number of trajectories to analyze, speeding up the planning procedure. The achieved results were qualified by expert neurosurgeons as satisfactory. Our proposed method allows neurosurgeons to calibrate the surgical planning system by allowing them to establish the risk brain structure and the risk value for each structure.

Currently, for the serious air pollution and global warming effect caused by the substance released from the present vehicle, it is expected that the regulatory requirements for the emission will become more stringent. A new concept of the combustion technology that can reduce the NOx and PM related to combustion is urgently needed. To cope with such social demands, many developed countries are efforts to develop the environment friendly vehicle engine at the national lever in order to satisfy with strengthening emission control. As a main combustion technology among new combustion technology for the new generation engine, the homogenous charge compression engine (HCCI) is expanding its application range by employing multiple combustion mode, catalyst, direct fuel injection and partially premixed combustion. In this paper, a multi-injection method in order to apply the HCCI combustion method without mainly altering engine specifications and practicality by referring to the results of the HCCI engine was investigated. Applied with forced charging, exhaust gas recirculation (EGR) and compression ratio change, it was evaluated to the possibility of securing optimum fuel economy and emission reduction in the IMEP 0.8 MPa range.

Abstract: The establishment of a circular economy in the mining sector, taking advantage of innovations in the exploration and development of hydrocarbon reserves, [ ], their [ ], transportation [ ] and subsequent processing [ ] are significant concerns. The issues surrounding the employment of technology targeted at enhancing environmental safety to increase the productivity of the reproduction process of the natural gas and oil resource base are equally important. The paper discusses the use of green seismic technology of survey to determine the oil and gas potential of the subsoil. A methodological toolkit is proposed for carrying out technical and economic calculations to determine indicators of the environmental and economic efficiency of using innovative resource-saving technology for geological survey in areas densely planted with forests. The purpose of the work is to establish the viability of employing resource-saving technology known as Green Seismic to search for promising hydrocarbon objects in forested areas and determine the expected environmental and economic benefits of geological exploration using the suggested enhanced methodology for their evaluation. The tasks set to achieve the goal were solved using methods of geological and economic assessment of the hydrocarbon raw material potential of territories and water areas, environmental assessment of the negative influence of anthropogenic environmental impact on the natural environment, economic and statistical methods of performing technical and economic calculations to determine performance indicators for the implementation of innovative projects in the field of geological exploration. The novelty of the results obtained lies in the proposed improved algorithm for conducting an environmental and economic assessment of geological exploration for hydrocarbon raw materials, a conceptual description of the Green Seismic technology, systematization of technical, economic, and environmental risks, justification of new regional directions for geological exploration using resource-saving seismic exploration technology.

This study presents the development and pilot implementation of an assessment and shared deci-sion-making methodology called the Gezamenlijk Inschatten van Zorgbehoeften (GIZ), designed for youth (health) care professionals working with children and families. The three-phase approach included a needs assessment, development of the GIZ methodology, and pilot implementation in a preventive youth health care and youth care setting, involving parents, adolescents, and youth (health) care professionals. The needs assessment produced nine criteria that the GIZ methodology needed to meet. Based on these criteria, the GIZ methodology was developed and described using the Template for Intervention Description and Replication (TIDieR). The pilot implementation demonstrated high client engagement, satisfaction, and feasibility in daily practice. The GIZ ap-proach promotes appropriate support for families by improving the joint assessment and shared decision-making process in youth (health) care. This study supports the implementation of GIZ in youth (health) care practice and highlights the need for further focus on implementation and sus-tainability.

Friction stir welding (FSW) is a solid state welding process for joining metallic alloys and dissimilar metals. It has emerged as an alternative technology for welding high strength alloys that are difficult to join with conventional techniques. FSW is used to produce products with better mechanical properties. Now a days aluminum alloys have been widely used in several industrial applications such as aerospace, marine, automobile and commercial applications due to their light weight structure, better mechanical properties and high corrosion resistance.In this work, three welding parameters such as spindle speed, welding speed and plunge depth were considered for friction stir welding. FSW was carried out between dissimilar aluminum alloy plates (AA6061 and AA 8011) to produce butt joint.A Box-Behnken design with three factors and three levels was chosen to minimize the number of experimental conditions .The tensile strength and hardness of the welded regions were evaluated. The optimum level settings and the major parameters that influence the joint strength were obtained by Box-Behnken design.

This manuscript presents a system that can generate a 2D grid map and a 3D voxel model of an environment by fusing multiple sensors integrated into a robot. The fusion of these sensors is done by utilizing Robot Operating System (ROS) and some of its libraries. The sensors that are fused in the robot are a Light Detection and Ranging (LIDAR), Inertial Measurement Units (IMU), wheel encoders, and a Time-of-Flight camera. With the fusion of the point cloud data information obtained with the Time-of-Flight camera, the laser information of the LIDAR sensor, in addition to the odometry generated with the other sensors, a 2D grid map and a 3D model of two different environments were created, thus testing the performance of the system.

Accurately monitoring insecticide resistance in target mosquito populations is important to combating malaria and other vector-borne diseases, and robust methods are key. The “WHO susceptibility bioassay” has been used for +60 years: mosquitoes of known physiological status are exposed to a discriminating concentration of insecticide. Several changes to the test procedures have been made historically which may seem minor but could impact bioassay results. The published test procedures and literature for this method were reviewed for methodological details. Areas where there was room for interpretation in the test procedures or where the test procedures were not being followed were assessed experimentally for impact on bioassay results: covering or uncovering of the tube end during exposure, number of mosquitoes per test unit, and mosquito age. Many publications do not cite the most recent test procedures, methodological details are reported which contradict the test procedures referenced or methodological details are not fully reported. As a result, the precise methodology is unclear. Experimental testing showed that using fewer than the recommended 15-30 mosquitoes per test unit significantly reduced mortality, covering the exposure tube had no effect, and using mosquitoes older than 2-5 days old increased mortality, particularly in the resistant strain. Recommendations are made for better reporting of experimental parameters.

The Bologna Process and the European Higher Education area require the application of new active methodologies in the classroom that place the student at the center of his or her learning process. In the present work we analyze the application of a Service-Learning methodology in the context of a Final Degree Dissertation (FDD) in the degree in Environmental Sciences at the University of Extremadura (Spain). The project deals with an isolated Kichwa community in Ecuador and involves the development of alternative science education materials for the capacitation of in-service science teachers. This paper evaluates how an FDD carried out according to self-learning (SL) principles can help in the acquisition of so-called soft skills and how these can be focused in the promotion of the Sustainable Development Goal (SDG) knowledge and achievement. To this end, a qualitative study of the experience and a deep evaluation, followed by a final reflection, were carried out. According to the preliminary results, we can conclude that Higher Education should include SDGs in its teaching praxis and could do this successfully using the SL methodology.

New class of biologically active and non-active compounds can be synthesized via transition metal mediated Suzuki cross coupling reaction that has a great impact on the advancement of organic chemistry. These resulted products can lend a helping hand in pharmaceutical and polymer chemistry for the betterment of mankind. Suzuki-Miyaura cross coupling reaction is one of the best tools through which many natural and non-natural compounds can be synthesized.

: Mistrust, amplified by numerous artificial intelligence (AI) related incidents, has caused the energy and industrial sectors to be amongst the slowest adopter of AI methods. Central to this issue is the black-box problem of AI, which impedes investments and fast becoming a legal hazard for users. Explainable AI (XAI) is a recent paradigm to tackle this challenge. Being the backbone of the industry, the prognostic and health management (PHM) domain has recently been introduced to XAI. However, many deficiencies, particularly lack of explanation assessment methods and uncertainty quantification, plague this young field. In this paper, we elaborate a framework on explainable anomaly detection and failure prognostic employing a Bayesian deep learning model to generate local and global explanations from the PHM tasks. An uncertainty measure of the Bayesian model is utilized as marker for anomalies expanding the prognostic explanation scope to include model’s confidence. Also, the global explanation is used to improve prognostic performance, an aspect neglected from the handful of PHM-XAI publications. The quality of the explanation is finally examined employing local accuracy and consistency properties. The method is tested on real-world gas turbine anomalies and synthetic turbofan data failure prediction. Seven out of eight of the tested anomalies were successfully identified. Additionally, the prognostic outcome showed 19% improvement in statistical terms and achieved the highest prognostic score amongst best published results on the topic.

Hox gene clusters are crucial in Embryogenesis. It was observed that some Hox genes are located in order along the telomeric to centromeric direction of the DNA sequence: Hox1, Hox2, Hox3…. These genes are expressed in the same order in the ontogenetic units of the Drosophila embryo along the Anterior-Posterior axis. The two entities (genome and embryo) differ significantly in linear size and in-between distance. This strange phenomenon was named Spatial Collinearity (SP). Later, it was observed that, particularly in the Vertebrates, a Temporal Collinearity (TC) coexists: first is Hox1 expressed, later Hox2 and even later Hox3,…,. According to a Biophysical Model (BM), pulling forces act at the anterior end of the cluster while a cluster fastening applies at the posterior end. Hox clusters are irreversibly elongated along the force direction. During Evolution, the elongated Hox clusters are broken at variable lengths thus split clusters may be created. An Empirical Rule was formulated distinguishing development due to a complete Hox cluster from development due to split Hox clusters. BM can ‘explain’ this Empirical Rule. In a spontaneous mutation where the cluster fastening is dismantled, a minimal pulling force can automatically shift the cluster inside the Hox activation domain. This cluster translocation can probably explain the absence of Temporal Collinearity in Drosophila.

This paper introduces a rigorous and comprehensive approach for the assessment of marine shafting systems through the utilization of an advanced Pi-Theorem based scaling methodology. Integrating journal bearing similarity assessment and shaft-line scaling methodology with advanced dimensional analysis, the study aims to provide a methodology foundation for systematic replication and analysis of marine shafting systems through scaled models. The proposed scaling methodology ensures geometric and mechanical similarity in terms of shaft-line deflection, considering key scaling parameters such as shaft length, diameter, weight, loads, rotational speed, material properties, bearing locations, and offsets. The advanced dimensional analysis computes specific non-dimensional ratios to guarantee a close resemblance between a real-size system and a scaled lab model, enabling meaningful experimentation. The methodology is analytically derived and validated with numerical simulations for a case study, conducting comparative analysis, evaluating discrepancies, and utilizing the integrated framework for experimentation.

The multi-objective optimization design of hydraulic climbing mechanism (the core mechanism of gantry crane) was realized by using the method of combining central composite design (CCD), Kriging and multi-objective genetic algorithm (MOGA). Firstly, the hydraulic climbing mechanism model was established and the appropriate design variables were selected. The mass, maximum deformation and maximum equivalent stress of the hydraulic climbing mechanism was taken as the optimization objectives. Through the comparative analysis of the parameters of wedge block, anchor block, anchor plate、baffle, the parameters that have the greatest impact on the optimization objectives are selected as geometric constraints. Then, according to the results of experimental design, Kriging model was used to establish the response surface optimization model of objective function. Finally, the optimal results were obtained by using MOGA method. The experimental results show that the optimization strategy is reliable, and the mass of the optimized model is reduced by 10.28%. While meeting the actual production requirements, the lightweight design of the hydraulic climbing mechanism is realized, which saves the design cost and improves the material utilization rate.

This study proposes a methodology for identifying time intervals in which time-of-use (ToU) energy tariffs can be set. This is achieved by analyzing the variability in electric power demand and esti-mating the potential for demand flexibility. The proposed methodology is as follows: first, data preprocessing is performed, focusing on the organization and cleaning of individual consumption records. Subsequently, the data are processed and classified by using consumption variability analysis and clustering techniques. Then, representative clusters are selected and time intervals are analyzed to identify periods of high electric power consumption variability. This methodology was tested with real data from smart meters in the Colombian electrical system, in which time intervals with potential for settinh ToU tariffs were ultimately identified. This work promotes the implementation of demand response strategies that enhance sustainability and facilitate the transition to a more resilient energy landscape both nationally and internationally. The findings are expected to contribute to the formulation of tariff schemes that encourage con-scious changes in electric energy consumption patterns.

Commercial development of tidal stream energy is hampered by technical and financial challenges, and impeded by uncertainty about potential environmental effects that drive environmental risk assessments and permitting (consenting) processes. The effect of greatest concern for operational tidal stream energy devices is the potential for marine animals to collide with turbine blades, resulting in injury or death. Due to the turbulent and often turbid waters that frequently characterize tidal turbine sites, there is an absence of empirical evidence about collisions with marine animals. This paucity of observations often leads to risk-averse permitting decisions that further restrict the deployment of tidal energy devices that are needed to collect this evidence. This paper relies on the framework of stressors and receptors that is used widely in marine energy studies and outlines a stepwise probabilistic methodology that applies existing knowledge to further elucidate the risk to marine animals from operational tidal turbines. A case study using striped bass from the Bay of Fundy, Canada, accompanies the methodology, to partially demonstrate its application.

The study of the surface thermodynamic properties of solid materials is primordial for the determination of the dispersive surface energy, polar enthalpy of adsorption and Lewis’s acid base properties of solid particles. Inverse gas chromatography technique (IGC) at infinite dilution is the best surface technique for the determination of the surface physicochemical properties of materials. (1) Background: This paper was devoted to study the surface properties of solid materials such as alumina particles by using IGC technique. (2) Methods: Different methods and molecular models such as spherical, cylindrical, van der Waals, Redlich-Kwong, Kiselev and geometric models, were used to determine the London dispersive surface energy of solid surfaces. Hamieh model was also used and highlighted the thermal effect on the surface area of solvents. (3) Results: The variations of the dispersive surface energy and the free energy of adsorption were determined for alumina particles as a function of the temperature as well as their Lewis’s acid base constants. Alumina surfaces were proved to exhibit a strong Lewis amphoteric character three time more basic than acidic (4) Conclusions: The new methodology based on Hamieh model gave the more accurate results of the physicochemical properties of the particle surfaces.

The assessment of the number of people exposed to natural hazards, especially in countries with strong urban growth, is difficult to be updated at the same rate as land use develops. This paper presents a remote sensing based procedure for quick updating the assessment of the population exposed to natural hazards. A relationship between satellite nightlights intensity and urbanization density from global available cartography is first assessed when all data are available. This can be used to extrapolate urbanization data at different time steps, updating exposure each time new nightlights intensity maps are available. As reliability test for the proposed methodology, the number of people exposed to riverine flood in Italy is assessed, deriving a probabilistic relationship between DMSP nightlights intensity and urbanization density from GUF database for the year 2011. People exposed to riverine flood are assessed crossing the population distributed on the derived urbanization density with flood hazard zones provided by ISPRA. The validation on reliable exposures derived from ISTAT data shows good agreement. The possibility to update exposure maps with higher refresh rate makes this approach particularly suitable for applications in developing countries, where exposure may change at sub-yearly scale.

The overall cost of a hydropower plant is mainly due to the expenses for civil works, mechanical equipment (turbine and control units) and electrical components. The goal of a new draft tube design is to obtain a geometry that reduces investment costs, especially the excavation ones, but the primary driver is to increase the overall machine efficiency allowing for reduced payback time. In the present study, an optimization study of the elbow-draft tube assembly of a Kaplan turbine was conducted. A CFD model for the complete turbine has been developed and validated; next, an optimization of the draft tube alone was performed using a Design of Experiments technique; finally, several optimum solutions for the draft tube were obtained using a Response Surface technique aiming at maximizing pressure recovery and minimizing flow losses. A selection of optimized geometries was subsequently post-checked using the validated model of the entire turbine and a detailed flow analysis on the obtained results could make it possible to provide insight into the improved designs. It was observed that efficiency could be improved by 1% (in relative terms), and the mechanical power increased by 1,8% (in relative terms) with respect to the baseline turbine.

Marine sponges, a well documented prolific source of natural products, harbors numerous microbial communities believed to possess N-acyl homoserine lactones (AHLs) mediated Quorum sensing (QS) as one of the mechanisms of interaction. Bacteria and eukaryotic organisms are known to produce molecules that can interfere with QS signaling, thus affecting microbial genetic regulation and function. In the present study, we established the potential for production of both QS signal molecules as well as QS interfering molecules (QSI) in the same sponge species Sarcotragus spinosulus. A total of eighteen saturated acyl chain AHLs were identified along with six putative unsaturated acyl chain AHLs. Bioassay guided purification led to the isolation of two brominated metabolites with QS-interfering activity. The structures of these compounds were elucidated by comparative spectral analysis of 1HNMR and HR-MS data and was identified as 3-Br-N-methyltyramine (1) and 5,6-dibromo-N,N-dimethyltryptamine (2). The QSI activity of compounds 1 and 2 were evaluated using reporter gene assays for long- and short-chain signals (E. coli pSB1075 and E. coli pSB401) and was confirmed by measuring dose dependent inhibition of proteolytic activity and pyocyanin production in P. aeruginosa PAO1. The obtained results showed the co-existence of QS and QSI in S. spinosulus, a complex network which may mediate the orchestrated function of the microbiome within the sponge holobiont.

Background: Self-harm (SH) refers to self-injury or intentional self-poisoning with varying degrees of suicidal intent and is a major public health issue for children and adolescents (C&A) worldwide. Given significant gaps exist in our understanding of the associated psychopathology in C&A, this paper outlines the protocol for a prospective clinical study examining risk factors of SH and additional candidate parameters (not routinely assessed) during an acute SH episode. Methods: The EXPAAND (EXploring Psychiatric and Attentional risk-factors in Adolescents Needing intervention for Deliberate self-harm) is a randomised control trial to assess additional novel candidate risk factors for SH in C&A and to evaluate the effectiveness of SH-targeted brief psychological intervention (Therapeutic Assessment (TA)), within a real-world acute clinical setting, as we include neurodiversity and gender diversity in this study. EXPAAND is conducted in 4 phases: (i) recruitment & randomisation; (ii) extended assessment; (iii) randomised intervention; and (iv) follow-up observational period to ascertain clinical outcomes for comparison. Expected Results: We envisage that by diagnosing and treating attentional disorders when detected will mitigate potential confounding effects of these conditions. We also expect that SH-focused TA will be effective in reducing subsequent SH and in improving engagement in follow-up and subsequent treatments.

A novel compressible real gas 1D finite volume thermofluid network modelling methodology is proposed that can be applied in the analysis of supercritical CO₂ (sCO2) power cycles. It is applied to simulate centrifugal compressor performance via a mean line approach that directly solves the mass, energy, and momentum balance equations for the discretized flow channels within the machine along with the associated loss models, component characteristics, and applicable compressible real gas equation of state. This can be integrated seamlessly with the rest of the power cycle components like pipes, valves, heat exchangers, etc., thereby eliminating the need for static performance maps and the associated difficulties to ensure similarity over the whole range of operation. This direct simulation of the internal flows also makes it possible to do integrated cycle design optimization that includes the geometry of the compressors, and to simulate fast transients for dynamic analysis. The methodology was applied to simulate well-documented air and sCO2 centrifugal compressors and compared the generated results with that of conventional thermofluid network incompressible and compressible ideal gas approaches. The results indicate that the proposed compressible real gas approach can capture the stagnation pressure changes and isentropic efficiencies with good accuracy for both cases over the whole range of mass flow rates and shaft rotational speeds. In contrast, the conventional thermofluid network incompressible and compressible ideal gas approaches are only applicable in selected regions of the fluid property regime and suffer from discretization errors and inappropriate treatment of the relationship between stagnation and static pressures. Furthermore, comparative analyses between the newly proposed approach and the traditional mechanical energy balance method are performed, showing that the latter approach needs to be discretized more finely through the compression process to correctly capture the polytropic compression path shape, whereas the former more accurately captures the stagnation pressure changes through the analyzed compressors with only a single increment per compressor component.

Brushless Direct Current Motors are significantly improved for using many electrical applications. The design investigation is increased year by year and most of the motor design researchers find out the superior efficiency of the BLDC motor. The traditional motor consumed more electrical power than BLDC motor. The design of BLDC motors that are compact, small, easy to control, save energy and light weight. Due to this fact, the design of BLDC motor should be analyzed to improve the motor characteristics performance. The research focuses on the design of BLDC motor performance using Taguchi Method and Response Surface Methodology (RSM) for Finite Element Method (FEM). Firstly, the Taguchi Method is applied to identify the optimization point of design parameters and consider using the reference model of actual BLDC electric fan motor with a rated power of 26Watts design. Based on the Taguchi Method to create the RSM is used to two-step optimization design performance using in FEM analysis. The performances of motor design proposed approach to provide the effeteness for motor design investigator. In this investigation aims the better structural performances in output power, torque, efficiency and torque ripple. The final design of proposed model achieved an energy efficiency is 10% higher than the reference design of prototype modes, the output power result is 10W higher this reference design. We can reduce the loss of the proposed motor design. Furthermore, the maximum torque can also increase the 0.032Nm of that design. The design simulation results were produced and studied by the FEM analysis of JMAG software. From the evaluation results, the configurations of reference model design are compared with the proposed design by using the three methods of motor design optimization showed the best characteristics for performance of motor investigation design.

Glycosylation is a common post-translation modification present on majority of eukaryotic proteins. Therefore, it is dependent on the host cell line and affected by the cell culture and purification process. Additionally, glycosylation of therapeutic biologics is known to have a profound impact on binding and downstream effector functions. Hence, glycosylation is increasingly considered a critical quality attribute (CQA) of biopharmaceutical drugs and has been showed to affect the safety and efficacy of these molecules. Therefore, regulatory agencies have adopted a Quality by Design (QbD) approach for glycan monitoring at various steps with stringent controls to ensure efficacy and safety. This requires multiple, orthogonal fit-for-purpose tools to study the process. One key unmet need in downstream organizations of large pharmaceutical companies is a real-time, rapid glycan detection and quantification tool to guide purification/expression process. To meet this need, we have developed a selective, colorimetric assay which selectively stains sugar moieties (glycosylated IgGs) which appears as magenta bands on an SDS-PAGE resolved gel. The selectivity arises because the method leverages stereochemical differences of hydroxyl groups between amino acids and carbohydrates to selectively stain the primary alcohol in carbohydrates but not in amino acids. Specifically, our method selectively oxidizes the ‘cis-diol’ group in carbohydrates to aldehydes and stains the aldehydes on an SDS-PAGE gel by Schiff’s reaction. Our method is semi-quantitative and has comparable sensitivity to Coomassie with LoD of around 50ng. The method can detect glycosylated IgGs produced in multiple cell lines (including HEK and CHO), thereby enabling us to study batch-to-batch variability and can critically stain both N-linked and O-linked glycosylation. We also show that the assay can be used as a downstream purification guide for process analytics following ion-exchange and hydrophobic interaction chromatography.

Physiologically Based Pharmacokinetic Models (PBPK) are mechanistical tools generally employed in the pharmaceutical industry and environmental health risk assessment. These models are recognised by regulatory authorities for predicting organ concentration-time profile, pharmacokinetic and daily intake dose of xenobiotics. Extension of PBPK models to capture sensitive populations like pediatric, geriatric, pregnant females, fetus etc. and diseased population like renal impairment, liver cirrhosis etc. is a must. However, the current modelling practice and existing models are not mature enough to confidently predict the risk in these populations. A multidisciplinary collaboration between clinicians, experimental and modeler scientist is vital to improve the physiology, and calculation of biochemical parameters for integrating the knowledge and refining existing PBPK models. Specific PBPK covering compartments like cerebrospinal fluid, and hippocampus are required to gain mechanistic understanding about xenobiotic disposition in these sub-parts. The PBPK model assists in building quantitative adverse outcome pathways (qAOPs) for several endpoints like developmental neurotoxicity (DNT), hepatotoxicity and cardiotoxicity. Machine learning algorithms can predict physicochemical parameters required to develop in-silico models where experimental data is unavailable. Integrating machine learning with PBPK carries the potential to revolutionize the field of drug discovery and development and environmental risk. Overall, this review tried to summarize the recent developments in the in-silico models, building qAOPs, use of machine learning for improving existing models along with a regulatory perspective. This review can act as a guide for toxicologists who wish to build their careers in kinetic modeling.

The article describes the methodology of the experimental analysis of operational and cost-effective assessment using geographic information system (GIS) technologies, as opposed to the assessment of the tourism potential of the nature of the Fergana Valley in Uzbekistan using long term and costly classical approaches. Based on the ArcGIS (10.8) grid index approach of 20 natural geographical indicators of the valley, such as geographical location, relief, climate, hydrographic and biological, the level of tourism comfort was determined and the location of 6 tourist-recreation zones were defined. The level of accuracy of the tourist-recreational zones all situated utilizing GIS technologies was confirmed by field-expedition approaches.

Identifying groups that share common features among datasets through clustering analysis is a typical problem in many fields of science, particularly in post-omics and systems biology research. In respect of this, quantifying how a measure can cluster or organize intrinsic groups is important since currently there is no statistical evaluation of how ordered is, or how much noise is embedded in the resulting clustered vector. Many of the literature focuses on how well the clustering algorithm orders the data, with several measures regarding external and internal statistical measures; but none measure has been developed to statistically quantify the noise in an arranged vector posterior a clustering algorithm, i.e., how much of the clustering is due to randomness. Here, we present a quantitative methodology, based on autocorrelation, to assess this problem.

In this study, by using Least Square Method, the dataset for the Gross Domestic Product per capita is modeled as a function satisfying the fractional differential equation. The function itself is assumed to be the finite summation of its previous values and the derivatives with unknown coefficients. Then, the prediction for the upcoming years is done by having an approach dividing the dataset into 4 regions corresponding to four different tasks. The mathematical model of the Gross Domestic Product (GDP) per capita of the countries (and union) which are Brazil, China, European Union (EU), India, Italy, Japan, UK, the USA, Spain, and Turkey is constructed with a new methodology called as the deep assessment method which comes from the expressing an arbitrary function modeling the dataset as the finite summation of its previous values and the derivatives with unknown coefficient. The method uses the fractional calculus properties combining with Least Square Method and is compared to Long short-term memory (LSTM) algorithm which is a special type of neural network used for time sequences in general.

Keywords: Wall-like RC columns; Strengthening; FRP; NSM rebars; Steel plates; Testing; FE modeling; Preloading.

The emergence of electric vehicles has brought new issues such as the problem of rolling element bearings (REBs) operating at high speeds. Losses due to these components in mechanical transmissions are a key issue and must therefore be taken into account right from the design stage of these systems. Among these losses, the one induced by the motion of rolling elements , known as drag loss, becomes predominant in high-speed REBs. Although an experimental approach is still possible, it is difficult to isolate this loss in order to study it properly. A numerical approach based on CFD is therefore a possible way forward, even if other issues arise. The aim of this article is to study the ability of such an approach to correctly estimate the drag coefficient associated with the motion of rolling elements. The influence of the numerical domain extension, the mesh refinement, the simplification of the ring shape and the presence of the cage, on the values of the drag coefficient is presented. While it seems possible to compromise on the calculation domain and mesh size, it appears that the other parameters must be taken into account as much as possible to obtain realistic results.

Road pavement monitoring represents the baseline to the pavement maintenance process. To quickly fix a damaged road, relevant authorities need a high-efficiency methodology that allows them to obtain data describing the current conditions of a network of roads. In urban areas, large-scale monitoring campaigns may be more expensive and not fast enough to describe how pavement degradation has evolved over time. Furthermore, at low speeds, many technologies are inadequate for monitoring the streets. In such a context, employing black box equipped vehicles to perform a routine inspection could be an excellent starting point. However, the vibration-based methodologies used to detect road anomalies are strongly affected by the speed of these vehicles. In this study, a statistical method was to analyze the effects of speed on road pavement conditions at different severity levels through the data recorded by taxi vehicles. Likewise introduced was a process that overcomes the speed effect when considering road surface conditions. The methodology proposed has succeeded in predicting the right damage severity level based on only two recorded parameters: speed and pavement deterioration index.

The present study employed a modifed QuEChERS method to systematically analyze the presence of fifteen Quinolones and seven Tetracyclines antibiotic residues in local animal food. Additionally, a multi-level-four-factor Box-Behnken design (BBD) within the framework of Response surface methodology (RSM) was utilized to evaluate the various factors affecting the detection efficiency of the sample pretreament procedure. The optimization was performed by Design Expert®, the factors including volume of the acetonitrle, the addition of formic acid, the duration of extract and the addition of EDTA were combined to experiment design until reach an optimal solution. Finally, the sample test was conducted by ultra-high performance liquid chromatography-quadrupole-linear ion trap mass spectrometry in both multiple reaction monitoring (MRM) and enhanced product ion (EPI) scan modes on a QTRAP® 5500 instrument. The overall average recoveries from actual samples fortified with 22 antibiotics at three levels ranged from 74.7 to 122.6% based on the use of matrix-fortified calibration with the variation ranging from 2.1 to 18.2% (n=6). The limits of detection and quantification were 0.3 μg kg-1 and 1.0 μg kg-1, respectively.

Regeneration of biological tissues in medicine is challenging, and 3D bioprinting offers an innovative way to create functional multicellular tissues. One common way in bioprinting is bioink which is one type of the cell-loaded hydrogel. For clinical application, however, the bioprinting still suffers from satisfactory performance, e.g. in vascularization, effective antibacterial, immunomodulation and regulation of collagen deposition. Many studies have incorporated different bioactive materials into the 3D printed scaffolds to optimize the bioprinting. Here, we review a variety of additives added to the 3D bioprinting hydrogel. The underlying mechanisms and methodology for biological regeneration are important and will provide useful basis for future research.

Rapid in vitro assessment of antimicrobial drug efficacy under clinically relevant pharmacokinetic conditions is an essential element of both drug development and clinical use. Here we present an overview of a novel integrated methodology for rapid assessment of such efficacy, particularly against emergence of resistant bacterial strains, as jointly researched by the authors in recent years. This methodology enables rapid in vitro assessment of antimicrobial efficacy of a single or multiple drugs in combination, following clinically relevant pharmacokinetics. The proposed methodology entails (a) automated collection of longitudinal time-kill data in an optical-density instrument; (b) processing of collected time-kill data with the aid of a mathematical model to de-termine optimal dosing regimens under clinically relevant pharmacokinetics for a single or mul-tiple drugs; and (c) in vitro validation of promising dosing regimens in a hollow fiber system. Proof-of-concept of this methodology through a number of in vitro studies is discussed. Future directions for refinement of optimal data collection and processing are discussed.

This article presents a methodology for the design of rehabilitation devices that considers factors involved in a clinical environment. This methodology integrates different disciplines that work together. The methodology is composed by 3 phases and 13 stages with specific tasks, the first phase includes the clinical context considering the requirements of the patient and therapist during the rehabilitation, the second phase is focused in engineering based on the philosophy of digital twin, and in the third phase is evaluated the device. This article explains the characteristics of the methodology and how it was applied in the design of an exoskeleton for passive rehabilitation of the upper limb.

The ongoing electrification of the heat and transport sectors is expected to lead to a substantial increase in peak electricity demand over the coming decades, which may drive significant investment in network reinforcement in order to maintain a secure supply of electricity to consumers. The traditional way of security provision has been based on conventional investments such as the upgrade of the capacity of electricity transmission or distribution lines. However, the energy storage technology can also provide security of supply, thereby constituting a cost-efficient alternative to expensive conventional reinforcements. In this context, the current paper presents a methodology for the economic quantification of the security contribution of energy storage. This methodology makes use of mathematical optimization for the calculation of the F-factor metric, which reflects the optimal amount of peak demand reduction as compared to the power capability of the energy storage asset. In this context, a case study is presented in which the security contribution of energy storage is analyzed as a function of its power capability, energy capacity and efficiency as well as of characteristics of load patterns.

Studies into the cognitive effects of alcohol have been mixed. They also present methodological challenges, often relying on self-report of alcohol consumption leading to hangover. The current study used BAC (obtained via breathalyser) and self-reported drinking behavior during a night out and related these to hangover severity and cognitive function measured over the internet in the same subjects the following morning. Volunteers were breathalysed and interviewed as they left a central entertainment district of an Australian state capital. They were provided with a unique identifier and, the following morning, logged on to a website. This included an online version of the Alcohol Hangover Severity Scale (AHSS), and number and type of drinks consumed the previous night and the eTMT-B - a validated, online analogue of the Trail Making Test B of executive function and working memory. Hangover severity was significantly correlated with one measure only, namely the previous night’s BAC (r = .228, p = .019). Completion time on the eTMT-B was significantly correlated with hangover severity ( r = .245, p = .012), previous night’s BAC (r = .197, p = .041) and time spent dinking (r = .376, p < .001). These findings confirm that alcohol hangover negatively affects cognitive functioning and that poorer working memory and executive performance correlates with hangover severity. The results also support the utility of using online measures in hangover research.

The research presents the Methodology of Improving the Accuracy in Text Classification in Light of Modelling the Latent Semantic Relations (LSR). The aim of this Methodology is to find the ways of eliminating the Limitations of Discriminant and Probabilistic methods for LSR revealing and customizing the Text Classification Process to the more accurate recognition of the text tonality. This aim should be achieved by using the knowledge about the text’s Hierarchical Semantic Context in the form of Corpora-based Hierarchical Sentiment Dictionary. The main scientific contribution of this research is the following set of approaches to improve the qualitative characteristics of Text Classification process: combination of the Discriminant and Probabilistic methods allowing to decrease the influences of the Limitations of these methods on the LSR revealing process; considering each document as a complex structure allowing to estimate documents integrally by separated classification of topically completed textual component (paragraphs); taking into account the features of Argumentative type of documents (Reviews) allowing to use the author’s subjective evaluation of text tonality for development the Text Classification methodology. Tonality, expressed by the Review’s author, has a significant, but not critical, effect on the qualitative indicators of Sentiment Recognition.

Streets are an essential element of urban safety governance and urban design, but they are designed with little regard for possible gender differences. This study proposes a safety perception evaluation method from the female perspective based on street view images (SVIs) and mobile phone data, taking the central city of Guangzhou as an example. The method relies on crowdsourced data and uses a machine learning model to predict the safety perception map. It combines the simulation of women's walking commuting paths to analyse the areas that need to be prioritised for improvement. Multiple linear regression was used to explain the relationship between safety perception and visual elements. The results showed the following: 1) There were differences in safety perceptions across genders. Women gave overall lower safety scores and more dispersed distribution of scores. 2) Approximately 11% of the streets in the study area showed weak perceived safety, and approximately 3% of these streets have high pedestrian flows and require priority improvements. 3) Safe visual elements in SVIs included the existence of roads, sidewalks, cars, railways, people, skyscrapers, and trees. Our findings can help urban designers determine how to evaluate urban safety and where to optimise key areas. Both have practical implications for urban planners seeking to create urban environments that promote greater safety.

Falls, highly common in the constantly increasing global aging population, can have a variety of negative effects on their health, well-being, and quality of life, including restricting their capabilities to conduct Activities of Daily Living (ADLs), which are crucial for one’s sustenance. Timely assistance during falls is highly necessary, which involves tracking the indoor location of the elderly during their diverse navigational patterns associated with ADLs to detect the precise location of a fall. With the decreasing caregiver population on a global scale, it is important that the future of intelligent living environments can detect falls during ADL.s while being able to track the indoor location of the elderly in the real world. Prior works in these fields have several limitations, such as – the lack of functionalities to detect both falls and indoor locations, high cost of implementation, complicated design, the requirement of multiple hardware components for deployment, and the necessity to develop new hardware for implementation, which make the wide-scale deployment of such technologies challenging. To address these challenges, this work proposes a cost-effective and simplistic design paradigm for an Ambient Assisted Living system that can capture multimodal components of user behaviors during ADLs that are necessary for performing fall detection and indoor localization in a simultaneous manner in the real world. Proof of concept results from real-world experiments are presented to uphold the effective working of the system. The findings from two comparison studies with prior works in this field are also presented to uphold the novelty of this work. The first comparison study shows how the proposed system outperforms prior works in the areas of indoor localization and fall detection in terms of the effectiveness of its software design and hardware design. The second comparison study shows that the cost for the development of this system is the least as compared to prior works in these fields, which involved real-world development of the underlining systems, thereby upholding its cost-effective nature.

Natural rivers in urban areas bear significant potential to provide ecosystem services for the surrounding inhabitants. However, surface sealing by houses and street networks, urban drainage, disposal of waste and wastewater resulting from advancing urbanization usually lead to the deterioration of urban rivers and their riparian areas. This ultimately damages their ability to provide ecosystem services. This paper presents an innovative methodology for a rapid and low-cost assessment of the ecological status of urban rivers and riparian areas in developing countries under data scarce conditions. The methodology uses a combination of field data and freely available high-resolution satellite images to assess three ecological status categories: river hydromorphology, water quality, and riparian land cover. The focus here is on the assessment of proxies for biophysical structures and processes representing ecological functioning that enable urban rivers and riparian areas to provide ecosystem services. These proxies represent a combination of remote sensing land cover- and field-based indicators. Finally, the three ecological status categories are combined to quantify the potential of different river sections to provide regulating ecosystem services. The development and application of the methodology is demonstrated and visualized for each 100 m section of the Pochote River in the City of León, Nicaragua. This spatially distributed information of the ecosystem service potential of individual sections of the urban river and riparian areas can serve as important information for decision making regarding the protection, future use, and city development of these areas, as well as the targeted and tailor-made development of nature-based solutions such as green infrastructure.

There is a growing demand for clean-label products. This study aimed to obtain a food-grade coloring ingredient for meat products based on the formation of Zn-protoporphyrin from porcine livers, thus contributing to the development of nitrite-free products. First, the effects of sodium disulfite, and acetic, ascorbic, and lactic acids on Zn-protoporphyrin formation and total microbial count were studied. The combination of ascorbic and acetic acid resulted in a higher Zn-protoporphyrin content than acetic acid alone and maintained microbial levels (ca. 3 log CFU/mL). Second, a response surface methodology was used to maximize Zn-protoporphyrin while maintaining microbiological food standards. The effects of pH (4.2–5.4), incubation time (3–30 h), and temperature (25–50 ºC) were studied. The selected conditions for Zn-protoporphyrin formation involved anaerobic incubation at pH 4.8 and 45 °C for 24 h. The safety was validated through challenge testing for relevant pathogens (Listeria monocytogenes, Salmonella spp., and Clostridium perfringens). A significant reduction (&gt; 6 log units) was observed for L. monocytogenes and Salmonella, whereas C. perfringens spores remained at inoculated levels. The optimized procedure is proven to be microbiologically safe, and it is proposed to improve the color of nitrite-free meat products.

Target 12.3 of the United Nations Sustainable Development Goals (SDGs) calls for halving per capita global food waste at the retail and consumer levels, by 2030. The Food Waste Index is suggested as a methodology for grasping the situation. This paper focuses on the consumer level (household food waste). We argue that in order for generating useful information for devising and implementing effective measures for reducing food waste, it should be measured at Level 3 of the Food Waste Index, based on sorting analysis of generated waste, making a distinction between avoidable and non-avoidable food waste. Furthermore, a breakdown by sub-categories that reflect the flow of food in the household could help identify target behaviours. We have developed a categorisation scheme that is internationally agreeable and adoptable, and 1) generates useful information for policy-making and for tackling with reduction of food waste, 2) makes clear the concept of avoidable food waste, and 3) is practical and does not overcomplicate the work of grasping the situation of food wastage. Results of workshops regarding this scheme suggest that the scheme satisfies the criteria. This scheme has been applied to a few sorting analyses of household food waste in Japan, and their results are compared.

This paper presents a methodology to evaluate (1) to what extent students of a higher degree in the field of education acquire sustainability competencies, and (2) to determine whether the subjects that develop the ESD achieve their learning objectives. The methodology is applied to a case study. The instruments used are the sustainability survey and the sustainability presence map developed by the EDINSOST project. The survey consists of 18 questions, and has been answered by 104 first-year students and 86 fourth-year students belonging to the Bachelor Degree in Primary Education Teaching at the University of Sevilla. The Mann-Whitney U test has been used to compare the results of the two groups, and Cohen's D has been used to measure the effect size. Students only obtain significant improvements, with 95% confidence, in three questions (Q4, Q5 and Q6), all concerning critical thinking and creativity. An improvement is also detected in question Q11, with a confidence of 90%. However, no subject in the curriculum develops the learning outcomes concerning questions Q4, Q5 and Q6, and only one subject develops the learning outcomes regarding question Q11. On the other hand, up to five subjects declare development of the learning outcomes regarding questions in which there is no improvement in student learning. These results suggest that the subjects are failing to reach their ESD learning objectives, and that the students are either trained in sustainability outside the university or the subject learning guides do not reflect the work done by the students throughout their studies

Immune-cell reprogramming driven by mitochondria-derived reactive electrophilic immunometabolites (mt-REMs—e.g., fumarate, itaconate) is an emerging phenomenon of major biomedical importance. Despite their localized production, mt-REMs elicit significantly-large local and global footprints within and across cells, through mechanisms involving electrophile signaling. Burgeoning efforts are being put into profiling mt-REMs’ potential protein-targets and phenotypic mapping of their multifaceted inflammatory behaviors. Yet, precision indexing of mt-REMs’ first-responders with spatiotemporal intelligence and locale-specific function assignments remains elusive. Highlighting the latest advances and overarching challenges, this perspective aims to stimulate thoughts and spur interdisciplinary innovations to address these unmet chemical-biotechnological needs at therapeutic immuno-signaling frontiers.

In the present paper, we efficiently solve the two-body problem for extreme cases such as those with high eccentricities. The use of numerical methods, with the usual variables, cannot maintain the perihelion passage accurately. In previous articles, we have verified that this problem is treated more adequately through temporal reparametrizations related to the mean anomaly through the partition function. The biparametric family of anomalies, with an appropriate partition function, allows a systematic study of these transformations. In the present work, we consider the elliptical orbit as a meridian section of the ellipsoid of revolution, and the partition function depends on two variables raised to specific parameters. One of the variables is the mean radius of the ellipsoid at the secondary, and the other is the distance to the primary. One parameter regulates the concentration of points in the apoapsis region, and the other produces a symmetrical displacement between the polar and equatorial regions. The three most used geodesy latitude variables are also studied, resulting in one not belonging to the biparametric family. However, it is in the one introduced now, which implies an extension of the biparametric method. The results obtained by the method presented here now allow a causal interpretation of the operation of numerous reparametrizations used in the study of orbital motion.

This paper focused on the finite element analysis of structural system in extreme loading condition. Two different stud shape and thicknesses were analyzed under blast. The stud thickness such as 1.19 mm and 1.5 mm were modelled and analyzed using ABAQUS 6.14. FEM is a tool which predicts the engineering physics of the real structure. To validate the finite element modelling performed by authors, a reference work published by earlier researchers on cold-formed steel stud wall is considered and examined in the present study. The novelty of this study was web corrugation and influence of flange width on stud. The models mimic like an air bag in a car to delay the pressure timing inside the stud wall. The mass of explosive used as 1.56 kg at a standard scaled distance. Time versus displacement was captured out at four locations in the stud wall. One of the objectives is to develop mathematical model to validate the deformation of stud under blast loading. Two mathematical models were validated using Artificial Neural Network (ANN). The results captured in ANN model was error histogram, regression plot, best performance fit and training data. The models were capable of resisting the moderate blast load. The response surface methodology (RSM) was employed to evaluate model performance Regression equations are useful for predicting future trends and outcomes, which is crucial for planning and decision-making. The primary goal of this work is to evaluate cold-formed steel stud walls with varying stud sizes under blast loading using finite element analysis and validated by ANN and RSM.

Life Cycle Assessment (LCA) is a technique developed to measure possible environmental impacts during the manufacture and use of a given product or service. Additive Manufacturing (AM) has proven to be suitable in several industries, especially wire and arc additive manufacturing (WAAM), offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and equivalent CO₂ emissions (CO₂e). This study aimed to develop a methodology to evaluate environmental indicators during the life cycle assessment, from gate-to-gate, in the production of two low-alloy carbon steel metal parts (flanges) using ER-90 wire and allowed identifying the main stages that most influence environmental indicators. The total energy consumption in the production of flanges 1 and 2 were, respectively, 10,239.0 MJ, 12,754.0 MJ and the total carbon footprint, respectively, 714.1 kgCO₂e kg^-1 and 749.3 kgCO₂e kg^-1.

Waste heat dissipated in the exhaust system in a combustion engine represents a major source of energy to be recovered and converted into useful work. A waste heat recovery system (WHRS) based on an Organic Rankine Cycle (ORC) is a promising approach, and has gained interest in the last few years in an automotive industry interested in reducing fuel consumption and exhaust emissions. Understanding the thermodynamic response of the boiler employed in an ORC plays an important role in steam cycle performance prediction and control system design. The aim of this study is therefore to present a methodology to study these devices by means of pattern recognition with infrared thermography. In addition, the experimental test bench and its operating conditions are described. The methodology proposed identifies the wall coordinates, traces paths, and tracks wall temperature along them in a way that can be exported for subsequent post-processing and analysis. As for the results, through the wall temperature paths on both sides (exhaust gas and working fluid) it was possible to quantitatively estimate the temperature evolution along the boiler and, in particular, the beginning and end of evaporation.

Deck inclination and vertical displacements are among the most important technical parameters to evaluate the health status of a bridge and to verify its bearing capacity. Several methods, both conventional and innovative, are used for structural rotations and displacement monitoring; no one of these does allow, at the same time, precision, automation, static and dynamic monitoring without using high cost instrumentation. The proposed system uses a common laser pointer and image processing. The elastic line inclination is measured by analyzing the single frames of a HD video of the laser beam imprint projected on a flat target. For the image processing, a code was developed in Matlab® that provides instantaneous rotation and displacement of a bridge, charged by a mobile load. An important feature is the synchronization of the load positioning, obtained by a GNSS receiver or by a video. After the calibration procedures, a test was carried out during the movements of a heavy truck maneuvering on a bridge. Data acquisition synchronization allowed to relate the position of the truck on the deck to inclination and displacements. The inclination of elastic line was obtained with a precision of 0.01 mrad. The results demonstrate the suitability of the method for dynamic load tests, control and monitoring of bridges.

(1) Background: Childhood immunization is vital for preventing morbidities and mortalities globally. However, rural Pakistan is facing persistent challenges, particularly after recent global health crises in gauging accurate vaccination coverage estimates. This study aimed to apply a novel Lot Quality Assurance Sampling (LQAS) methodology due to its rapid and reliable estimates of the routine immunization rates among children aged 12-23 months old in Shikarpur, Sindh, and to identify priority areas for future interventions. (2) Methods: A cross-sectional household survey design was adopted for an in-depth assessment of vaccination coverage in a previously under-studied rural context. (3) Results: Data were collected from 1,402 children aged 12-23 months across 47/49 Union Councils in Shikarpur within 141 randomly identified clusters. LQAS was innovatively employed along with GIS Mapping which provided a spatial analysis of the distribution of immunization coverage and the spot map of clusters. The weighted average for fully immunized children was 42.4% after applying Direct Adjustment Method. A steep decline in coverage for each successive vaccine dose was observed, and 39 key priority areas were identified on GIS-based plotting for intensive health interventions. Multivariate Logistic Regression Model further revealed informational gaps and fear of side effects as major barriers to achieving complete immunization. (4) Conclusions: The innovative application of LQAS and GIS Mapping in this study has provided a comprehensive glimpse of its utility in future follow-ups and similar assessments. The findings stress the critical need to tackle the foundational reasons behind the vaccination gaps, with a special focus on enhancing awareness and information dissemination in the key priority areas.

Abstract: Marine eutrophication is a pervasive and growing threat to global sustainability. Thereby nutrient discharges to the marine environment should be reduced to a minimum. When fertilizers are loaded to vessels in ports, a significant amount of nutrients are released into the sea, but so far these actions have received little attention. Here, we employed the Boosted Regression Trees modeling (BRT) to define relationships between fertilizer loading, loading area, rain intensity and nutrient discharge to the marine environment and then used the established relationships to predict daily nutrient discharge due to fertilizer loading. The studied subject was a port in the Gulf of Finland, where significant amount of both nitrogen and phosphorus are loaded to vessels. BRT models accounted for a significant proportion of the variability of nutrient discharge. As expected, the nutrient discharge increased with the amounts of fertilizers loaded and the intensity of rain. On the other hand, with increasing loading area the amounts of total nitrogen discharge increased, but phosphorus discharge decreased. The latter result may be due to different char-acteristics of the loading areas of different terminals. The model predicted that at the studied port the total nitrogen and phosphorus discharge into the marine environment due to fertilizer loading was 272,906 and 196 kg per year, respectively. Im-portantly, the developed model can be used to predict nutrient loads for different future scenarios to propose the best mitigation methods for nutrient discharges to the sea.

In this work, we introduce a scalable and efficient GPU-accelerated methodology for volumetric particle advection and finite-time Lyapunov exponent (FTLE) calculation, focusing on the analysis of Lagrangian Coherent Structures (LCS) in large-scale Direct Numerical Simulation (DNS) datasets across incompressible, supersonic, and hypersonic flow regimes. LCS play a significant role in turbulent boundary layer analysis, and our proposed methodology offers valuable insights into their behavior in various flow conditions. Our novel owning-cell locator method enables efficient, constant-time cell search, and the algorithm draws inspiration from classical search algorithms and modern multi-level approaches in numerical linear algebra. The proposed method is implemented for both multi-core CPUs and Nvidia GPUs, demonstrating strong scaling up to 32,768 CPU cores and up to 62 Nvidia V100 GPUs. By decoupling particle advection from other problems, we achieve modularity and extensibility, resulting in consistent parallel efficiency across different architectures. Our methodology was applied to calculate and visualize the FTLE on four turbulent boundary layers at different Reynolds and Mach numbers, revealing that coherent structures grow more isotropic proportional to the Mach number, and their inclination angle varies along the streamwise direction. We also observed increased anisotropy and FTLE organization at lower Reynolds numbers, with structures retaining coherency along both spanwise and streamwise directions. Additionally, we demonstrated the impact of lower temporal frequency sampling by upscaling with an efficient linear upsampler, preserving general trends with only 10% of the required storage. In summary, we present a particle search scheme for particle advection workloads in the context of visualizing LCS via FTLE that exhibits strong scaling performance and efficiency at scale. Our proposed algorithm is applicable across various domains requiring efficient search algorithms in large structured domains. While this manuscript focuses on the methodology and its application to LCS, an in-depth study of the physics and compressibility effects in LCS candidates will be explored in a future publication.

Virgin coconut oil (VCO) is a functional food with important health benefits. Its economic interest encourages fraudsters to deliberately adulterate VCO with cheap and low-quality vegetable oils for financial gain, causing health and safety problems for consumers. In this context, there is an urgent need for rapid, accurate and precise analytical techniques to detect VCO adulteration. In this study, the use of Fourier Transform Infrared (FTIR) spectroscopy combined with Multivariate Curve Resolution - Alternating Least Squares (MCR-ALS) methodology was evaluated to verify purity or adulteration of VCO with reference to several low-cost commercial oils such as sun-flower, maize and peanut oils. Control charts were developed to assess the purity of oil samples using MCR-ALS scores values calculated from a data set of pure and adulterated oils. In addition, quantification models were developed using MCR-ALS with correlation constraint for adulterated coconut oil to assess the blend composition. Different data pre-treatment strategies were tested in order to best extract the information contained in the sample fingerprints, and the calibration models were optimised using a genetic algorithm (GA) to select the most important variables. The models gave satisfactory results in external validation procedure, with absolute errors of less than 4.6 % for samples adulterated with sunflower, maize and peanut oils.

The use of crime mapping has been used by the police to inform deployment of resources for many decades. Such approaches are commonly used to underpin crime control strategies designed to prevent or reduce acquisitive crimes such as domestic burglary. In recent decades there has been a shift away from simple hot spot identification to more complex geospatial mapping methodologies, such as near repeat analysis which was developed through research regarding burglary victimisation. One of these newly emerging methodologies is built upon the ecological, optimal forager theory (OFT). Research using this theory to examine domestic burglary offending intimated potential for positive results in predicting areas at risk of future crime. This led to a number of police services using crime analysis methodologies built upon OFT to underpin their deployment of resources in an effort to prevent or reduce domestic burglary through increased capable guardianship. However, to date, there has been no detailed examination of how the police services implemented such approaches. As such, this study seeks to fill this gap by examining OFT strategies implemented within 5 police services. By interviewing participants directly involved in the programs the study gathers views and perspectives of its relative success. As a result, we identify that participants felt the strategies produced limited impact on recorded burglary crime. We discuss how despite some positive by-products of the strategies, failure to comprehensively apply the theoretical foundations of OFT, and a variety of implementation failures have undermined the various programs, ultimately impacting their effectiveness.

The Failure Mode and Effect Analysis (FMEA) is often used to improve a system's reli-ability. This paper proposes a new approach that aims to overcome the most critical defects of the traditional FMEA. This new methodology combines the Entropy and Best Worst Method (BWM) methodology with the EDas and System Dynamics, FMECA: The EN-B-ED Dynamic FMECA. The main innovation’s point of the proposed work is the presence of an unknown factor (Cost), that allows to obtain an objective weighted factor, a risk index when a machine failure occurs. The criticality analysis has been carried out using software (Vensim PLE x64) to simulate System Dynamics models to identify corrective actions and evaluating the possible implementation of these ac-tions. The methodology proposed is applied to a case study in a relevant Italian com-pany in the agri-food sector.

The emotional dimension in education has become increasingly important in recent decades. Enhancing the emotional dimension of prospective teachers in science subjects is higher education stuff responsibility. The implementation of active methodologies could modify the traditional student-teacher roles that are encouraged by the educational policies implemented in the Bologna Process. The principal aim of this work is to describe a Project Based Learning methodology and to introduce it as potential resource for the emotional and cognitive improvement of 19 prospective primary teachers enrolled in a scientific subject. This is a qualitative study with a transversal sustainability approach in the context of a research line focused on Higher Education for Sustainable Development. A questionnaire was designed and filled by the students at two different times, before and after implementation of the activity. The initial feedback from students was surprisingly enthusiastic by the fact that they were working with rockets, despite of this is not a common emotion in the science field. The results show the emotional improvement of prospective teachers after the implementation. It is concluded that a correct science education is necessary during the training of teachers taking into account their emotional dimension and the social repercussion due to the future transmission.

Polyurethanes are materials with a strong structure-property relationship. The goal of this research was to study the effect of a polyol blend composition of polyurethanes on its properties using a mixture design and setting mathematic models for each property. Water absorption, hydrolytic degradation, contact angle, tensile stretch, hardness and modulus were studied. Additionally, Thermal stability was studied by thermogravimetric analysis. Area under the curve was used to evaluate the effect of polyol blend composition on thermal stability and kinetics of water absorption and hydrolytic degradation. Least squares were used to calculate the regression coefficients. Models for the properties were significant, and lack of fit was not (P<0.05). Fit statistics suggest both good fitting and prediction. Water absorption, hydrolytic degradation and contact angle were mediated by the hydrophilic nature of the polyols. Tensile strength, modulus and hardness could be regulated by the molecular weight and hydroxyl index of the polyols. Regression of DTG curves from thermal analysis showed improvement of thermal stability with the increase of PCL and PE. An ANOVA test of the model terms demonstrated that three component effects on bulk properties like water absorption, hydrolytic degradation, hardness, tensile strength and modulus, and the PEG*PCL interaction with the contact angle, which is a surface property. Mixture design application allowed for an understanding of the structure-property relationship through mathematic models.

The depletion and environmental problems associated with fossil fuels have encouraged us to look for alternative feedstock that do not compromise food security and the environment. Sorghum is a fast-growing crop that can be harvested twice a year and produces both food and straw that can be utilized in the production of bio-based fuels. In this study, the production of bioethanol and the effects of fermentation parameters on ethanol yield are presented. A sequential pretreatment method was employed, using dilute sulfuric acid (1%) at 125 °C in the first stage and dilute sodium hydroxide (1.25 %) at 90 °C in the second stage. The residues left after the sequential pretreatment stage were hydrolyzed using acid hydrolysis. The sugar concentration of the hydrolysates was determined using the phenol sulfuric acid method, and three hydrolysates having sugar levels of 30.42 g/L, 31.79 g/L, and 32.9875 g/L were selected for fermentation. The ethanol yield was determined after 72 hours of fermentation at 30 °C with varying inoculum sizes (5%, 10%, and 15%) and pH (4.5, 5, and 5.5). With a maximum ethanol yield of 0.617 mL/g (48.742%) produced at a sugar content of 32.9875 g/L, pH of 5, and inoculum size of 15%, statistical analysis showed that all three independent parameters affected ethanol yield. According to these findings, while raising sugar content, inoculum amount, and pH all initially result in higher ethanol yields, doing so further reduces yield. So, in order to increase ethanol yield, fermentation conditions must be carefully managed while producing ethanol from sequential acidic-alkaline pretreated sorghum straw. The strategy followed by using sequential acidic-alkaline pretreatment of sorghum straw provides prospects for efficient and effective production of biofuels from alternative feedstock.

To date, theoretical analyses have provided several useful methods/algorithms for studying transition states and non-covalent interactions. Potential Energy Scan (PES) is one such method that has found wide application in the physicochemical community. Analyzing the PES profiles of the catalytic system of FeBr3 in Electrophilic Aromatic Substitution (EAS) with molecular halogens, one can notice an obvious difference from the modern textbook mechanisms proposed in this area of study. Moreover, the newly presented Graphic Methodology (GM) allows a simple and reliable transition state determination even for very weakly bound charge transfer complexes using second-order derivatives as an efficient tool in the graphical analysis. Relative errors that can be reduced to a few parts per thousand in transition state estimation make this method a potentially very useful tool in further graphical studies of non-covalent interactions. Studies performed using high-precision semiempirical methods suggest that the process of halonium ion quenching proceeds along a completely different pathway, suggesting a possible novel transition metal-nonmetal catalytic system involved in the EAS electrophilic quenching step. The results presented here strongly suggest a future GM application that is widely used and the introduction of pseudo and pre-transition states as new terms in the description of non-covalent interactions.