A long-term forecast study on the electricity demand of Taoussa of Mali is conducted in this paper, with various scenarios of socioeconomic and technological conditions. The analysis tool, which is applied in scenarios simulation, is the Model for Analysis of Energy Demand from the International Atomic Energy Agency. The analysis results are annual electricity demand and peak load forecast for the electrification from the period 2020 to 2035. During the planning period, the analysis results show that the electricity demand will increase to 49.40 MW (332.57 GWh) for the low scenario (LS), 66.46 MW (472.61 GWh) for the reference scenario (RS), and 89.47 MW (635 GWh) for the high scenario (HS). In addition, the total electricity demand increased at an average rate of 8.13% in the LS, 10.31% in the RS and 12.56% in the HS in all sectors. The electricity peak demand is expected to grow at 7.92%, 10.53% and 12.91% corresponding to the three scenarios; in this case, the system peak demand in 2035 will increase to 64.88 MW for the LS, 92.2 MW for the RS and 126.22 MW, the days of peak load are between 17th -23rd in May. The Industry sector will be the biggest electricity consumer of Taoussa area.

Even brief epileptic seizures can lead to activity-dependent structural remodeling of neural circuitry. Animal models show that the functional plasticity of synapses and changes in the intrinsic excitability of neurons can be crucial for epileptogenesis. However, the exact mechanisms underlying epileptogenesis remain unclear. We induced epileptiform activity in rat hippocampal slices for 15 min using a 4-aminopyridine (4-AP) in vitro model and observed hippocampal hyperexcitability for at least 1 hour. We tested several possible mechanisms of this hyperexcitability, including changes in intrinsic membrane properties of neurons, presynaptic and postsynaptic alterations. Neither input resistance nor other essential biophysical properties of hippocampal CA1 pyramidal neurons were affected by epileptiform activity. The glutamate release probability also remained unchanged, as the frequency of miniature EPSCs and the paired amplitude ratio of evoked responses did not change after epileptiform activity. However, we found an increase in the AMPA/NMDA ratio, suggesting alterations in the properties of postsynaptic glutamatergic receptors. Thus, the increase in excitability of hippocampal neural networks is realized through postsynaptic mechanisms. In contrast, the intrinsic membrane properties of neurons and the probability of glutamate release from presynaptic terminals are not affected in a 4-AP model.

One of the key challenges of stock trading is the stock prices follow a random walk process, which is a special case of a stochastic process, and are highly sensitive to new information. A random walk process is difficult to predict in the short-term. Many linear process models that are being used to predict financial time series are structural models that provide an important decision boundary, albeit not adequately considering the correlation or causal effect of market sentiment on stock prices. This research seeks to increase the predictive capability of linear process models using the SPDR S\&P 500 ETF (SPY) and the CBOE Volatility (VIX) Index as a proxy for market sentiment. Three econometric models are considered to forecast SPY prices: (i) Auto-Regressive Integrated Moving Average (ARIMA), (ii) Generalized Auto Regressive Conditional Heteroskedasticity (GARCH), and (iii) Vector Autoregression (VAR). These models are integrated into two technical indicators, Bollinger Bands and Moving Average Convergence Divergence (MACD), focusing on forecast performance. The profitability of various algorithmic trading strategies is compared based on a combination of these two indicators. This research finds that linear process models that incorporate the VIX Index do not improve the performance of algorithmic trading strategies.

This study introduces a comparative analysis of two deep learning (multilayer perceptron neural networks (MLP-NN) and the long short term memory networks (LSTMN)) models for transit travel time prediction. The two models were trained and tested using one-year worth of data for a bus route in Blacksburg, Virginia. In this study, the travel time was predicted between each two successive stations to all the model to be extended to include bus dwell times. Additionally, two additional models were developed for each category (MLP of LSTM): one for only segments including controlled intersections (controlled segments) and another for segments with no control devices along them (uncontrolled segments). The results show that the LSTM models outperform the MLP models with a RMSE of 17.69 sec compared to 18.81 sec. When splitting the data into controlled and uncontrolled segments, the RMSE values reduced to 17.33 sec for the controlled segments and 4.28 sec for the uncontrolled segments when applying the LSTM model. Whereas, the RMSE values were 19.39 sec for the controlled segments and 4.67 sec for the uncontrolled segments when applying the MLP model. These results demonstrate that the uncertainty in traffic conditions introduced by traffic control devices has a significant impact on travel time predictions. Nonetheless, the results demonstrate that the LSTMN is a promising tool that can has the ability to account for the temporal correlation within the data. The developed models are also promising tools for reasonable travel time predictions in transit applications.

Only two percent of Glioblastoma multiforme (GBM) patients respond to standard care and survive beyond 36 months (long-term survivors, LTS) while the majority survive less than 12 months (short-term survivors, STS). To understand the mechanism leading to poor survival, we analyzed publicly available datasets of 113 STS and 58 LTS. This analysis revealed 198 differentially expressed genes (DEGs) that characterize aggressive tumor growth and may be responsible for the poor prognosis. These genes belong largely to the GO-categories “epithelial to mesenchymal transition” and “response to hypoxia”. In this paper we applied upstream analysis approach which involves state-of-art promoter analysis and network analysis of the dysregulated genes potentially responsible for short survival in GBM. Binding sites for transcription factors associated with GBM pathology like NANOG, NF-κB, REST, FRA-1, PPARG and seven others were found enriched in the promoters of the dysregulated genes. We reconstructed the gene regulatory network with several positive feedback loops controlled by five master regulators – IGFBP2, VEGFA, VEGF165, PDGFA, AEBP1 and OSMR which can be proposed as biomarkers and as therapeutic targets for enhancing GBM prognosis. Critical analysis of this gene regulatory network gives insights on mechanism of gene regulation by IGFBP2 via several transcription factors including the key molecule of GBM tumor invasiveness and progression, FRA-1. All the observations are validated in independent cohorts and their impact on overall survival is studied.

Background: This study investigated the prevalence of worsening problems using Post Stroke Checklist (PSC) at 3, 6, and 12 months post-stroke and their associations with health-related quality of life. Methods: In stroke patients admitted between June 2014 and December 2015, PSC and EuroQol-5Dthree level (EQ-5D-3L) were assessed at post-stroke 3 (n=181), 6 (n=175), and 12months (n=89). The prevalence of worsening problems and its association withEQ-5D-3L at post-stroke 3 and 6months were analyzed. Results: An average of 0.59 (range 0–12), 1.47 (range 0–12), and 1.00 (range 0–10) worsening problems per patient was identified at 3, 6, and 12months after stroke, respectively. The most frequently and continuously identified worsening problems were mood disturbances (reported by 8.8%, 16.0% and13.5% of patients at 3, 6, and 12 months post-stroke, respectively). Worsening mobility was significantly associated with worse EQ-5D index at post-stroke 3 months (β,-0.583; 95% CI, -1.045 to -0.120). The worsening of mobility and communication was significantly associated with worse EQ-5D index at post-stroke 6 months (mobility: β,-0.170; 95% CI, -0.305 to -0.034, communication: β,-0.164; 95% CI, -0.309 to -0.020). Conclusions: PSC may be useful for the detection of various subjective worsening problems during serial clinical follow-up after stroke. Appropriate rehabilitation and management strategy to solve the identified problems could improve the quality of life in stroke survivors.

Riparian restoration is an important objective for landscape managers seeking to redress the widespread degradation of riparian areas and the ecosystem services they provide. This study investigated the long-term outcomes of ‘one-off’ restoration activities undertaken in the Upper Murrumbidgee Catchment, NSW, Australia. The objective of the restoration was to protect and enhance riparian vegetation and control erosion, and consequently reduce sediment and nutrient delivery into the Murrumbidgee River. To evaluate the outcomes 10 years after restoration, rapid riparian vegetation and geomorphological assessments were undertaken at 29 sites spanning the four different restoration methods used (at least five replicates per treatment), as well as at nine comparable untreated sites. We also trialed the use of aerial imagery to compare width of riparian canopy vegetation and projective foliage cover prior to restoration with that observed after 10 years. Aerial imagery demonstrated the width of riparian canopy vegetation and projective foliage cover increased in all restored sites, especially those with native plantings. The rapid assessment process indicated that 10 years after riparian restoration, the riparian vegetation was in a better condition at treated sites compared to untreated sites. Width of riparian canopy vegetation, native mid-storey cover, native canopy cover and seedling recruitment were significantly greater in treated sites compared to untreated sites. Geomorphological condition of treated sites was significantly better than untreated sites, demonstrating the importance of livestock exclusion to improve bank and channel condition. Our findings illustrate the value of ‘one-off’ restoration activities in achieving long-term benefits for riparian health. We have demonstrated that rapid assessments of the vegetation and geomorphological condition can be undertaken post-hoc to determine the long-term outcomes, especially when supported with analysis of historical aerial imagery.

Over the past decades, overweight and obesity has become a global epidemic and the leading threat for death. To prevent the serious risk, an overweight or obese individual must apply a long-term weight-management strategy to control food intake and physical activities, which is however, not easy. Recently, with the advances of information technology, more and more people can use wearable devices and smartphones to obtain physical activity information, while they can also access various health-related information from Internet online social networks (OSNs). Nevertheless, there is a lack of an integrated approach that can combine these two methods in an efficient way. In this paper, we address this issue and propose a novel mobile-social framework for health recognition and recommendation, namely, H-Rec². The main ideas of H-Rec² include (1) to recognize the individual's health status using smartphone as a general platform, and (2) to recommend physical activity and food intake based on personal health information, life science principles, and health-related information obtained from OSNs. To demonstrate the potentials of the H-Rec² framework, we develop a prototype that consists of four important components: (1) an activity recognition module that senses physical activity using accelerometer, (2) a health status modeling module that applies a novel algorithm to generate personalized health status index, (3) a restaurant information collection module that collects relevant information from OSN, and (4) a restaurant recommendation module that provides personalized and context-aware recommendation. To evaluate the prototype, we conduct both objective and subjective experiments, which confirm the performance and effectiveness of the proposed system.

Commercial buildings are a significant consumer of energy worldwide. Logistics facilities, and specifically warehouses, are a common building type yet under-researched in the demand-side energy forecasting literature. Warehouses have an idiosyncratic profile when compared to other commercial and industrial buildings with a significant reliance on a small number of energy systems. As such, warehouse owners and operators are increasingly entering in to energy performance contracts with energy service companies (ESCOs) to minimise environmental impact, reduce costs, and improve competitiveness. ESCOs and warehouse owners and operators require accurate forecasts of their energy consumption so that precautionary and mitigation measures can be taken. This paper explores the performance of three machine learning models (Support Vector Regression (SVR), Random Forest, and Extreme Gradient Boosting (XGBoost)), three deep learning models (Recurrent Neural Networks (RNN), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU)), and a classical time series model, Autoregressive Integrated Moving Average (ARIMA) for predicting daily energy consumption. The dataset comprises 8,040 records generated over an 11-month period from January to November 2020 from a non-refrigerated logistics facility located in Ireland. The grid search method was used to identify the best configurations for each model. The proposed XGBoost models outperform other models for both very short load forecasting (VSTLF) and short term load forecasting (STLF); the ARIMA model performed the worst.

Traditional soil characterization methods are time consuming, laborious and invasive and do not allow long-term repeatability of measurements. The overall aim of this paper was to assess and model spatial variability of the soil in an olive grove in south Italy by using data from two sensors of different type: a multi-spectral on-board drone radiometer and a hyperspectral visible-near infrared-shortwave infrared (VIS-NIR-SWIR) reflectance radiometer as well as sample data, to arrive at a delineation of homogeneous areas. The hyperspectral data were processed using continuum removal methodology to obtain information about the content and composition of clay. Differently, the multispectral data were firstly upscaled to the support of soil data using geostatistics and taking into account change of support. Secondly, the two-sensor data were integrated with soil granulometric properties by using the multivariate geostatistical techniques of multi-collocated cokriging and factor cokriging, in order to achieve a more exhaustive and finer-scale soil characterisation. The paper shows the impact of change of support on the uncertainty of soil prediction that can have a significant effect on decision making in Precision Agriculture. Moreover, four regionalised factors at two different scales (two per each scale) were retained and mapped. Each factor provided a different delineation of the field with areas characterised by different granulometry and clay composition. The applied method is sufficiently flexible and could be applied to any number and type of sensors.

Plant geneticists and breeders have used marker technology since the 1980s in quantitative trait locus (QTL) identification. Marker-assisted selection is effective for large-effect QTL but has been challenging to use with quantitative traits controlled by multiple minor effect alleles. Therefore, genomic selection (GS) was proposed to estimate all markers simultaneously, thereby capturing all their effects. However, breeding programs are still struggling to identify the best strategy to implement it into their programs. Traditional breeding programs need to be optimized to implement GS effectively. This review explores the optimization of breeding programs for variety release based on aspects of the breeder’s equation. Optimizations include reorganizing field designs, training populations, increasing the number of lines evaluated, and leveraging the large amount of genomic and phenotypic data collected across different growing seasons and environments to increase heritability estimates, selection intensity, and selection accuracy. Breeding programs can leverage their phenotypic and genotypic data to maximize genetic gain and selection accuracy through GS methods utilizing multi-trait and, multi-environment models, high-throughput phenotyping, and deep learning approaches. Overall, this review describes various methods that plant breeders can utilize to increase genetic gains and effectively implement GS in breeding .

Many complex behaviours in biological systems emerge from large populations of interacting molecules or cells, generating functions that go beyond the capabilities of the individual parts. Such collective phenomena are of great interest to bioengineers due to their robustness and scalability. However, engineering emergent collective functions is difficult because they arise as a consequence of complex multi-level feedback, which often spans multiple length-scales. Here, we present a perspective on how some of these challenges could be overcome by using multi-agent modelling as a design framework within synthetic biology. Using case studies covering the construction of synthetic ecologies to biological computation and synthetic cellularity, we show how multi-agent modelling can capture the core features of complex multi-scale systems and provide novel insights into the underlying mechanisms which guide emergent functionalities across scales. The ability to unravel design rules underpinning these behaviours offers a means to take synthetic biology beyond single molecules or cells and towards the creation of systems with functions that can only emerge from collectives at multiple scales.

This paper investigates portfolio optimization methodologies and short-term investment strate-gies in the context of the cryptocurrency market, focusing on ten major cryptocurrencies from January 2020 to November 2023. We employ high frequency data and utilize the Kurtosis Mini-mization methodology, alongside other optimization strategies, to construct and evaluate port-folios under different rebalancing frequencies. The empirical analysis reveals that cryptocurren-cies exhibit significant volatility, skewness, and kurtosis, necessitating sophisticated portfolio management techniques. We find that the Kurtosis Minimization methodology consistently outperforms other optimization strategies, delivering optimal returns to investors, particularly in shorter-term investment horizons. We demonstrate the diversification benefits of integrating cryptocurrencies into multi-asset portfolios and emphasize the importance of regular portfolio rebalancing in the volatile cryptocurrency market. Our findings offer insights for portfolio man-agers and investors seeking to optimize their investment outcomes in the cryptocurrency market, highlighting the importance of risk management, diversification, and dynamic portfolio man-agement strategies.

Long-term care (LTC) settings are increasingly used for palliative care in Japan. This study aimed to assess the proportion of LTC settings that provide palliative care services for older clients with advanced dementia in Japan and the trends across the types of settings. A nationwide questionnaire survey was conducted between November 2022 and January 2023, targeting 1,000 geriatric hospitals (GHs), 1,000 geriatric health services facilities (GHSFs), and 1,000 home nursing care stations (HNCSs). The palliative care practices for older patients with advanced dementia and their families in the agencies were assessed. Less than half of the GHs supported family participation or the spiritual needs of their older clients with dementia, while many had access to pain and symptom assessments and analgesic prescriptions by physicians. Less than half the GHSFs used pain assessment tools, assessed and supported family caregivers' pain and distress, and supported family participation in palliative care. More than 80% of the HNCSs practiced most of the listed palliative care. Current palliative care practices for older adults with dementia vary among GHs, GHSFs, and HNCSs. This emphasizes the need for targeted approaches to improve the provision of palliative care for patients with dementia across LTC settings in Japan.

The influences of doped hole transporting layer (HTL) on the performances of perovskite solar cells were studied. The influences of electrostatic and surface roughness effect by solvent additive doping were compared. The electrostatic effect of solvent additive doping was compared by addition of 1,8-diiodooctane and 1,8-dichlorooctane to the HTL layer. The surface roughness effect of solvent additive doping was examined using atomic force microscopy. The perovskite crystallinity by doping HTL was studied by X-ray diffraction. The conductivity of HTL was measured using four probe methods and was higher for doped devices. Enhanced conductivity of PEDOT:PSS film was also proved using fluorescence emission quenching. Long-term stability of the device was enhanced by doping HTL. The device with solvent additive exhibited much enhanced stability, retained over 80% of the initial PCE for 400 hours, while PCE of the device without solvent additive decreased to less than 80% after 200 hours. A very weak power microwave treatment was used for post-annealing of the fully fabricated devices. Post-annealing enhanced the lifetime of the device. Comparing different size of cells, the device lifetime was decreased as the cell area increased and as the size of the cell increased, the extent of lifetime enhancement by doping was increased.

Pure silver as well as silver compounds have been used as antiseptics for centuries. Nowadays, the most frequently applied form of silver is a nanoparticle form. Several studies demonstrate the ability of silver nanoparticles and silver salts to accumulate in the brain of laboratory ani-mals as well as the ability of silver nanoparticles to influence behavioral and cognitive functions of laboratory mammals. For the first time, the influence of a silver salt, in particular, silver citrate on the change dynamics of behavioral and cognitive functions of laboratory mice at the daily oral exposure during 30, 60, 120 and 180 days is investigated in the present research. We observed the anxiety increase after 30 days of the exposure as well as the ability of mice to adapt to the prolonged oral exposure of silver citrate manifested in the anxiety decrease, increase of locomotor activity and the tendency of long-term contextual memory improvement. Increase of locomotor activity and memory improvement might be associated with the sensitivity increase and regarded as compensatory mechanism to anxiety increase. The observed phenomenon is classified as a hormetic effect. A comparison with the analogous study implemented polyvi-nylpyrrolidone coated silver nanoparticles is carried out. It was concluded that the nanoform is more neurotoxic.

Background and Objective: There is a paucity of literature comparing unilateral instrumented transforaminal lumbar interbody fusion (UITLIF) with bilateral instrumented TLIF (BITLIF) regarding radiological alignment, including the coronal balance, even though UITLIF might have asymmetric characteristics in the coronal plane. This retrospective study aimed to compare the clinical and long-term radiological outcomes of 1-level UITLIF and BITLIF in lumbar degenerative diseases (LDD). Materials and Methods: Patients who underwent 1-level UITLIF with two rectangular polyetheretherketone (PEEK) cages or BITLIF with ≥ 5 years of follow-up at a single hospital were included. We compared the clinical and radiological outcomes between the UITLIF and BITLIF. Results: In total, 63 and 111 patients who underwent UITLIF and BITLIF, respectively, were enrolled. The median follow-up was 85.55 months (range: 60–130). The UITLIF group had a significantly shorter operation time (185.0 [170.0–210.0] vs. 225.0 [200.0–265.0], p < 0.001) and lower estimated blood loss (300.0 [250.0–500.0] vs. 550.0 [400.0–800.0], p < 0.001) than BITLIF group. Regarding the clinical outcomes, there were no significant differences in the intermittent claudication score (p = 0.495) and Kirkaldy–Willis criteria (p = 0.707) at 1 year postoperatively. The interval changes of the local coronal Cobb angle at the index level, L1-S1 lordotic angle, and coronal off-balance from the immediate postoperative radiograph to the last follow-up were not significantly different (p = 0.687, p = 0.701, and p = 0.367, respectively). Conclusion: UITLIF with two rectangular PEEK cages is a viable option for providing comparable clinical outcomes and radiological longevity to BITLIF in 1-level LDD. In addition, UITLIF has advantages over BITLIF in terms of operative time and blood loss.

Arable Сhernozems with high SOC contents have the potential to be significant sources of GHGs, and climate change is likely to increase SOC losses, making the issue of carbon sequestration in this region even more important. The prospect of maintaining SOC stock or increasing it by 4% an-nually under planned management practice modifications for the period up to 2090 was evaluated using a long-term experiment on Haplic Chernozem in the Rostov Region, Russia. In this study, we used the RothC model to evaluate SOC dynamics for three treatments with mineral and organic fertilization under two adaptation scenarios vs. business as usual, as well as under two climate change scenarios. Correction of crop rotation and the application of organic fertilizers at high rates are essential tools for maintaining and increasing SOC stocks. This can maintain SOC stock at the level of 84–87 Mg∙ha-1 until the middle of the 21st century, as the first half of the century is con-sidered the most promising period for the introduction of adaptation measures for the additional accumulation of SOC on Chernozems. Part of the additional accumulated SOC is expected to be lost before 2090.

In this study, long-term mortality effects associated with exposure to PM10, PM2.5, BC (black carbon), and NOx were analyzed in a cohort in southern Sweden during the period from 1991‒2016. Participants (those residing in Malmö, Sweden, born between 1923‒1950) were randomly recruited from 1991‒1996. At enrollment, 30,438 participants underwent a health screening, which consisted of questionnaires about lifestyle and diet, a clinical examination, and blood sampling. Mortality data were retrieved from the Swedish national cause of death register. The modeled concentrations of PM10 (particles with an aerodynamic diameter smaller than or equal to 10 µm), PM2.5 (particles with an aerodynamic diameter smaller than or equal to 2.5 µm), BC (black carbon), and NOx (nitrogen oxides) at the cohort participants' home addresses were used to assess air pollution exposure. Cox proportional hazard models were used to estimate the associations between long-term exposure to PM10, PM2.5, BC, and NOx and the time until death among the participants during the period from 1991‒2016. The hazard ratios (HRs) associated with an interquartile range (IQR) increase in each air pollutant were calculated based on the exposure lag windows of the same year (lag0), 1‒5 years (lag1‒5), and 6‒10 years (lag6‒10). Three models were used with varying adjustments for possible confounders including both single-pollutant estimates and two-pollutant estimates. With adjustments for all covariates, the HRs for PM10, PM2.5, BC, and NOx in the single-pollutant models at lag1‒5 were 1.06 (95% CI: 1.02‒1.11), 1.01 (95% CI: 0.95‒1.08), 1.07 (95% CI: 1.04‒1.11), and 1.11 (95% CI: 1.07‒1.16) per IQR increase, respectively. The HRs were in most cases decreased by the inclusion of a larger number of covariates in the models. The most robust associations were shown for NOx, with statistically significant positive HRs in all models. An overall conclusion is that road traffic-related pollutants had a significant association with mortality in the cohort.

This study investigates the cyclic load application impact on fly ash-based geopolymer composites that are reinforced with a low amount of fibre reinforcement. For reinforcement purposes, PVA and steel fibres are used. For testing purposes, four geopolymer composite mixes were made, 3 of which had fibre reinforcement. Simultaneously specimens were tested for shrinkage, static load-induced creep, and cyclic load-induced creep. For static and cyclic creep testing, specimens were loaded with 20% of their strength. For cyclic creep testing, load application and release cycles were seven days long. When each cycle was introduced, the load was added in steps. In 5 minutes, by 25% steps of the necessary load, the specimens were loaded or unloaded. Only plain specimens show that static creep strains are within cyclic creep strains. For all the other specimens, the static load is higher than the cyclic load-induced creep amplitude. Also, 1% PVA fibre-reinforced specimens show the most elastic characteristics under cyclic load, and 1% steel fibre-reinforced specimens appear to be the most resistant to the cyclic load introduction.

The global demand for energy has been steadily increasing due to population growth, urbanization, and industrialization. Numerous researchers worldwide are striving to create precise forecasting models for predicting energy consumption to manage supply and demand effectively. In this research, a time-series forecasting model based on multivariate multilayered long short-term memory (LSTM) is proposed for forecasting energy consumption and tested using data obtained from commercial buildings in Melbourne, Australia: the Advanced Technologies Center, Advanced Manufacturing and Design Center, and Knox Innovation, Opportunity, and Sustainability Center buildings. This research specifically identifies the best forecasting method for subtropical conditions and evaluates its performance by comparing it with the most used methods at present, including LSTM, bidirectional LSTM, and linear regression. The proposed multivariate multilayered LSTM model was assessed by comparing mean average error (MAE), root-mean-square error (RMSE), and mean absolute percentage error (MAPE) values with and without labeled time. Results indicate that the proposed model exhibits optimal performance with improved precision and accuracy. Specifically, the proposed LSTM model achieved a decrease in MAE by 30%, RMSE by 25%, and MAPE by 20% compared to the LSTM method. Moreover, it outperformed the bidirectional LSTM method with a reduction in MAE by 10%, RMSE by 20%, and MAPE by 18%. Furthermore, the proposed model surpassed linear regression with a decrease in MAE by 2%, RMSE by 7%, and MAPE by 10%. These findings highlight the significant performance increase achieved by the proposed multivariate multilayered LSTM model in energy consumption forecasting.

The COVID-19 pandemic has led to a significant and enduring influence on global health, in-cluding maternal and fetal well-being. Evidence suggests that placental dysfunction is a potential consequence of SARS-CoV-2 infection during pregnancy, which may result in adverse outcomes such as preeclampsia and preterm birth. However, the molecular mechanisms underlying this association remain unclear, and it is uncertain whether a mature placenta can protect the fetus from SARS-CoV-2 infection. To address the above hiatus, we conducted a transcriptome-based study of the placenta in both maternal and fetal compartments. We collected placental samples from 16 women, immediately after term delivery, of which seven had confirmed SARS-CoV-2 in-fection by PCR before parturition. Notably, we did not detect any viral load in either the maternal or fetal compartments of the placenta, regardless of symptomatic status. We extracted total RNA from placental tissues, separately from maternal and fetal compartments, constructed cDNA li-braries, and sequenced them to assess mRNA and small RNA expression. Our analysis revealed 727 differentially expressed genes (DEG) in the maternal placental tissue, with 608 upregulated and 109 downregulated in SARS-CoV-2-positive women compared with healthy, negative wom-en. In contrast, the fetal compartment did not exhibit any significant changes in gene expression with SARS-CoV-2 infection. Specifically, we observed significant downregulation of seven genes belonging to the pregnancy-specific glycoprotein (PSG), related to the immunoglobulin superfam-ily in the maternal compartment with active SARS-CoV-2 infection (fold change range from -13.70 to -5.28, FDR ≤ 0.05). Additionally, comparing symptomatic women with healthy, we identified 14,223 DEGs, with high expression of the inflammatory cytokine IL6 in the maternal placenta of the symptomatic women. Furthermore, KEGG analysis revealed that pathways relat-ed to viral infection, vascular smooth muscle contraction, and oxytocin signaling were altered significantly in symptomatic women. Overall, our study sheds light on the molecular mechanisms underlying the reported clinical risk of preeclampsia and preterm delivery in women with SARS-CoV-2 infection. Nonetheless, studies with larger sample sizes are warranted to further deepen our understanding of the molecular mechanisms of the placenta’s anti-viral effects in ma-ternal SARS-CoV-2 infection.

Talker variability has been reported to facilitate generalization and retention of speech learning, but is also shown to place demands on cognitive resources. Our recent study provided evidence that phonetically-irrelevant acoustic variability in single-talker (ST) speech is sufficient to induce equivalent amounts of learning to the use of multiple-talker (MT) training. This study is a follow-up contrasting MT versus ST training with varying degrees of temporal exaggeration to examine how cognitive measures of individual learners may influence the role of input variability in immediate learning and long-term retention. Native Chinese-speaking adults were trained on the English /i/-/ɪ/ contrast. We assessed the trainees’ working memory and selective attention before training. Trained participants showed retention of more native-like cue weighting in both perception and production regardless of talker variability condition. The ST training group showed long-term benefit in word identification, whereas the MT training group did not retain the improvement. The results demonstrate the role of phonetically-irrelevant variability in robust speech learning and modulatory functions of nonlinguistic working memory and selective attention, highlighting the necessity to consider the interaction between input characteristics, task difficulty, and individual differences in cognitive abilities in assessing learning outcomes.

The passenger prediction flow is very significant to transportation sustainability. This is due to some chaos of traffic jams encountered by the road users during their movement to the offices, schools, or markets at earlier of the days and during closing periods. This problem is peculiar to the transportation system of the Federal University of Technology Minna, Nigeria. However, the prevailing technique of passenger flow estimation is non-parametric which depends on the fixed planning and is easily affected by noise. In this research, we proposed the development of a hybrid intelligent passenger frequency prediction model using the Auto-Regressive Integrated Moving Average (ARIMA) linear model, Convolutional Neural Network (CNN), and Kalman Filter Algorithm (KFA). The passengers’ frequency of arrival at the bus terminals is obtained and enumerated through the closed-circuit television (CCTV) and demonstrated using the Markovian Queueing Systems Model (MQSM). The ARIMA model was used for learning and prediction and compared the result with the combined techniques of using CNN-KFA. The autocorrelation coefficient functions (ACF) and partial autocorrelation coefficient functions (PACF) are used to examine the stationary data with different features. The performance of the models was analyzed and evaluated in describing the short-term passenger flow frequency at each terminal using the Mean Absolute Percentage Error (MAPE) and Mean Squared Error (MSE) values. The CNN-Kalman-filter model was fitted into the short-term series and the MAPE values are below 10%. The Mean Square Error (MSE) shows that the CNN-Kalman Filter model has the overall best performance with 83.33% of the time better than the ARIMA model and provides high accuracy in forecasting.

The electric power distribution utility is responsible for providing energy to consumers in a continuous and stable way, failures in the electrical power system reduce the reliability indexes of the grid, directly harming its performance. For this reason, there is a need for failure prediction to reestablish power in the shortest possible time. Considering an evaluation of the number of failures over time, this paper proposes to perform a failure prediction during the first year of the pandemic in Brazil (2020) to verify the feasibility of using time series forecasting models for fault prediction. The Long Short-Term Memory (LSTM) model will be evaluated to obtain a forecast result that can be used by the electric power utility to organize the maintenance teams. The Wavelet transform shows to be promising in improving the predictive ability of the LSTM, making the Wavelet LSTM model suitable for the study at hand. The results show that the proposed approach has better results regarding the evaluation of the error in prediction and has robustness when a statistical analysis is performed.

We investigated the role of the human medio-temporal complex (hMT+) in the memory encoding and storage of a sequence of four coherently moving RDKs by applying repetitive transcranial magnetic stimulation (rTMS) during an early or late phase of the retention interval. Moreover, in a second experiment we also tested whether disrupting the functional integrity of hMT+ during the early phase impaired the precision of the encoded motion directions. Overall, results showed that both recognition accuracy and precision were worse in middle serial positions, suggesting the occurrence of primacy and recency effects. We found that rTMS delivered during the early (but not the late) phase of the retention interval was able to impair not only recognition of RDKs, but also the precision of the retained motion direction. However, such impairment occurred only for RDKs presented in middle positions along the presented sequence, where performance was already closer to chance level. Altogether these findings suggest an involvement of hMT+ in the memory encoding of visual motion direction. Given that both position sequence and rTMS modulated not only recognition but also precision of the stored information, these findings are in support of a model of visual short-term memory with a variable resolution of each stored item, consistent with the assigned amount of memory resources, and that such item-specific memory resolution is supported by the functional integrity of area hMT+.

Energy harvesting from wind turbines has been explored by researchers for more than a century from conventional turbines up to the latest bladeless turbines. Amongst these bladeless turbines, vortex bladeless wind turbine (VBT) harvests energy from oscillation of a turbine body. Due to the novelty of this science and the widespread researches around the world, one of the most important issues is to optimize and predict produced power. To enhance the produced output electrical power of VBT, the fluid-solid interactions (FSI) were analyzed to collect a dataset for predicting procedure. Long short-term memory (LSTM) method has been used to predict the produced power of VBT from the collected data. The reason of choosing LSTM from various artificial neural network methods is that the parameters of VBT study are all time- dependent and the LSTM is one of the most accruable algorithms for predicting time series data. In order to find the relationship between the parameter and the variables used in this research, a correlation matrix was presented. According to the value of 0.3 for the root mean square error (RMSE), a comparative analysis between the simulation results and its prediction shows that the LSTM method is very accurate for these types of research. Furthermore, the LSTM method has significantly reduced the computation time so that the prediction time of desired values has been reduced from an average of 2 and a half hours to two minutes. Also, one of the most important achievements of this study is to suggest a mathematical relation of VBT output power which helps to extend it in a different size of VBT with a high range of parameter variations.

Accurate forecasts of ocean waves energy can not only reduce costs for investment but it is also essential for management and operation of electrical power. This paper presents an innovative approach based on the Long Short Term Memory (LSTM) to predict the power generation of an economical wave energy converter named “Searaser”. The data for analyzing is provided by collecting the experimental data from another study and the exerted data from numerical simulation of searaser. The simulation is done with Flow-3D software which has high capability in analyzing the fluid solid interactions. The lack of relation between wind speed and output power in previous studies needs to be investigated in this field. Therefore, in this study the wind speed and output power are related with a LSTM method. Moreover, it can be inferred that the LSTM Network is able to predict power in terms of height more accurately and faster than the numerical solution in a field of predicting. The network output figures show a great agreement and the root mean square is 0.49 in the mean value related to the accuracy of LSTM method. Furthermore, the mathematical relation between the generated power and wave height was introduced by curve fitting of the power function to the result of LSTM method.

The clinical significance of carbon-ion radiotherapy (CIRT) for adenocarcinoma (AC) of the uterine cervix has been assessed in several single-institutional studies. To validate the significance, we conducted a multi-institutional survey of CIRT for locally advanced AC (LAAC) of the uterine cervix. We retrospectively analyzed the clinical outcomes of patients with stage IIB–IVA LAAC of the uterine cervix who underwent chemo-CIRT or CIRT alone between April 2010 and April 2016. Patients received 74.4 Gy (relative biological effectiveness [RBE]) in 20 fractions of CIRT or 55.2 Gy (RBE) in 16 fractions of CIRT plus 3 sessions of brachytherapy. Patients aged ≤70 years with adequate bone marrow and organ function were administered cisplatin weekly (40 mg/m2 per week for up to 5 weeks). Fifty-five patients were enrolled in this study. The median follow-up period was 67.5 months. The 5-year overall survival (OS) and local control (LC) rates were 68.6% and 65.2%, respectively. Multivariate analysis showed that the initial tumor response within 6 months was significantly associated with LC and OS. The present study represents promising outcomes of CIRT or chemo-CIRT for LAAC of the uterine cervix, especially in the cases showing initial rapid regression of the tumor.

Climate change has become the greatest threat to the survival of world and its ecosystem. With the irreversible impact on the ecosystem, problems like rise in sea level, food-insecurity, natural resources scarcity, seasonal disorders have increased over the past few years. Among these problems, the issue of water scarcity due to the lack of water resources and global warming has plagued several nations. Owing to the rising concerns over water scarcity United Nations (UN) has acknowledged water as a primary resource to the development of societies under the ‘Water Goal’ of the sustainable development goals. As the changing climate and intermittent availability of water resources pose major challenges to forecast demand, especially in countries like the United Arab Emirates (UAE) which has one of the highest per capita residential water consumption rates in the world. Therefore, the aim of this study is to propose an accurate water demand forecasting technique that incorporates all significant factors to predict the future water demands of the UAE. The forecasting model used is the Long Short Term Memory (LSTM), with the factors considered are mean temperature, mean rainfall, relative humidity, Gross Domestic Product (GDP), Consumer Price Index (CPI) and population growth. The LSTM model predicts the water demand forecasting in the UAE showing that the future demand will decrease from 1821 million m3 in 2018 to 1809.9 million m3 in 2027.

Organic carbon (OC) accumulation in soil mitigates greenhouse gases emission and improves soil health. We aimed to quantify the dynamics of OC stock in soils and to justify technologies that allow annual increasing OC stock in the arable soil layer by 4‰. We based the study on a field experiment established in 1936 in the 9-field crop rotation with a fallow on Chernozem in European Russia. The RothC version 26.3 was used for the reproducing and forecasting OC dynamics. In all fertilizer applications at FYM background, there was a decrease in the OC stock with preferable loss of active OC, except the period 1964-71 with 2-5‰ annual OC increase. The model estimated the annual C input in the arable soil layer as 1,900 kg·ha-1. For increasing OC stocks by 4‰ per year, one should raise input to 2400 kg·ha-1. Simulation was made for 2016-2090 using climate scenarios RCP4.5 and RCP8.5. Crop rotation without fallowing provided an initial increase of 3‰ and 6‰ of stocks in the RCP8.5 and RCP4.5 scenarios accordingly, followed by a loss in accumulated OC. Simulation demonstrates difficulties to increase OC concentration in Chernozems under intensive farming and potential capacity to rise OC stock through yield management.

For enhancing the maximized profit from bank as well as customer perspective, term deposit can accelerate finance fields. This paper focuses on likelihood of term deposit subscription taken by the customers. Bank campaign efforts and customer details are influential while considering possibilities of taking term deposit subscription. An automated system is provided in this paper that approaches towards prediction of term deposit investment possibilities in advance. Neural network(NN) along with stratified 10-fold cross-validation methodology is proposed as predictive model which is later compared with other benchmark classifiers such as k-Nearest Neighbor (k-NN), Decision tree classifier (DT), and Multi-layer perceptron classifier (MLP). Experimental study concluded that proposed model provides significant prediction results over other baseline models with an accuracy of 88.32% and Mean Squared Error (MSE) of 0.1168.

Hepatitis B virus (HBV) infection is a major factor in development of various liver diseases such as hepatocellular carcinoma (HCC). Among HBV encoded proteins, HBV X protein (HBx) is known to play key role in development of HCC. Hepatocyte nuclear factor 4α (HNF4α) is a nuclear transcription factor which is critical for hepatocyte differentiation. However, the expression level as well as its regulatory mechanism in HBV infection have yet to be clarified. Here, we observed the suppression of HNF4α in cells which stably express HBV whole genome or HBx protein alone, while transient transfection of HBV replicon or HBx plasmid had no effect on the HNF4α level. Importantly, in the stable HBV- or HBx-expressing hepatocytes, the downregulated level of HNF4α was restored by inhibiting ERK signaling pathway. Our data showed that HNF4α was suppressed during long-term HBV infection in cultured HepG2-NTCP cells as well as in mouse model following hydrodynamic injection of pAAV-HBV or in mice intravenously infected with rAAV-HBV. Importantly, HNF4α downregulation increased cell proliferation which contributed to the formation and development of tumor in xenograft nude mice. The data presented here provided several proofs for the effect of HBV infection in manipulating HNF4α regulatory pathway in HCC development.

Smart grids require flexible data driven forecasting methods. We propose clustering tools for bottom-up short-term load forecasting. We focus on individual consumption data analysis which plays a major role for energy management and electricity load forecasting. The two first sections are dedicated to the industrial context and a review of individual electrical data analysis. We are interested in hierarchical time-series for bottom-up forecasting. The idea is to disaggregate the signal in such a way that the sum of disaggregated forecasts improves the direct prediction. The 3-steps strategy defines numerous super-consumers by curve clustering, builds a hierarchy of partitions and selects the best one minimizing a forecast criterion. Using a nonparametric model to handle forecasting, and wavelets to define various notions of similarity between load curves, this disaggregation strategy applied to French individual consumers leads to a gain of 16\% in forecast accuracy. We then explore the upscaling capacity of this strategy facing massive data and implement proposals using R, the free software environment for statistical computing. The proposed solutions to make the algorithm scalable combines data storage, parallel computing and double clustering step to define the super-consumers.

Deep learning has recently attracted much attention due to its excellent performance in processing audio, image, and video data. However, few studies are devoted to the field of automatic modulation classification (AMC). It is one of the most well-known research topics in communication signal recognition, which remains challenging for traditional methods due to the complex disturbance from other sources. This paper proposes a heterogeneous deep model fusion (HDMF) method to solve the problem in a unified framework. The contributions include: 1) The convolutional neural network (CNN) and long short-term memory (LSTM) are combined by two different ways without prior knowledge involved; 2) A large database, including eleven types of single-carrier modulation signals with various noises as well as a fading channel, is collected with various signal-to-noise ratios (SNRs) based on a real geographical environment; and 3) Experimental results demonstrate that HDMF is super capable of copping with the AMC problem, and achieves much better performance when compared with the independent network. The source code and the database will be publically available.

Although the field of geomatics has seen multiple technological advances in the recent years which enabled new applications and simplified the consolidated ones, some tasks remain challenging, inefficient, and time- and cost-consuming. This is the case of accurate tridimensional surveys of narrow spaces. Static laser scanning is an accurate and reliable approach but impractical for extensive tunnel environments; portable laser scanning is on the other hand time-effective and efficient but not very reliable without ground control constraints. This paper describes the development process of a novel image-based multi-camera system meant to solve this specific problem: delivering accurate, reliable, and efficient results. The development is illustrated from the system conceptualization and initial investigations to the design choices and requirements for accuracy. The resulted working prototype has been put to the test to verify effectiveness of the proposed approach.

Nowadays, Multi-needle electrospinning has used to be an efficient method for producing nanofiber membranes. But in the process, the fluctuation errors in electrospinning fluid flow rate have directly influence the membrane quality, which bringing instability and still have not been solved yet. For finding out the solution to the inaccurate flow control in multi-needle, it is necessary to develop a multi-stage flow runner spinneret for large-scale production of nanofiber membrane. At first, the paper uses the finite element software COMSOL to numerically simulate the polymer flow in the runner of spinneret. Based on it, the velocity field distribution curve was draw and the velocity instability coefficient of the polymer flow was attained, which are providing theoretical guidance for the optimal design of spinneret. Next, the response surface analysis method (RSM) was used to establish a regression model between the average diameter of the nanofiber membrane and the process parameters. Then, above regression model used to perform variance data processing between the average diameter and the process parameter configuration. After that, the 2D and 3D response surface profiles and the significance analysis were completed. Finally, the stability of the nanofibers production was improved, which attained the optimal adjustment of process configuration in multi-needle electrospinning.

Low carbon supply chain management (LCSCM) strategies are required in the Indian manufacturing industries due to rapidly growing energy usage for financial and environmental concerns. LCSCM technologies face a number of challenges that limit their adoption. Eleven hurdles were selected from the literature as well as the recommendations of business and academic experts. These barriers are defined by a number of factors, including a lack of information, financial worries, environmental concerns, and governmental limits, among others. In addition, efforts are being made to quantify the most optimal relevant barriers using Multi criteria decision making (MCDM) techniques such as interpretive structural modeling (ISM) and decision-making trail and evaluation laboratory (DEMATEL). MICMAC analysis is used to estimate the sensitivity and priority of barriers based on dependency power and driving power. One of these barriers is a needed factor; three are driving elements; four barriers are linked factors; and three are self-sufficient factors. The findings of this study can help academic specialists, industry representatives, and practitioners in their ongoing attempts to adopt 'LCSCM techniques' in Indian manufacturing industries. The model is appropriately explained and applies the link between the barriers.The objective of this paper is the Evaluation and selection of most influential of Barriers to Adopt Low Carbon Supply Chain Management (LCSCM) in the Indian Manufacturing Sector is interrelated.

Open-vocabulary learning has recently gained prominence as a means to enable image segmentation for arbitrary categories based on textual descriptions. This advancement has extended the applicability of segmentation systems to a broader range of generally purpose scenarios. However, current methods often revolve around specialized architectures and parameters tailored to specific segmentation tasks, resulting in a fragmented landscape of segmentation models. In response to these challenges, we introduce OVAMTSeg, a versatile framework designed for Open-Vocabulary and Multitask Image Segmentation. OVAMTSeg harnesses adaptive prompt learning to empower the model to capture category-sensitive concepts, enhancing its robustness across diverse multi-task and scenario contexts. Text prompts are employed to effectively capture semantic and contextual features of the text, while cross-attention and cross-modal interactions enable the fusion of image and text features. Furthermore, a transformer-based decoder is incorporated for dense prediction. Extensive experimental results underscore the effectiveness of OVAMTSeg, showcasing its state-of-the-art performance and superior generalization capabilities across three segmentation tasks. Notable achievements include a 47.5 mIoU in referring expression segmentation, 51.6 mIoU on Pascal-VOC with four unseen classes, 46.6 mIoU on Pascal-Context in zero-shot segmentation, 65.9 mIoU on Pascal-5i, and 35.7 mIoU on COCO-20i datasets for one-shot segmentation.

This article introduces an innovative design method for public lighting systems that surpasses the limitations of conventional approaches, which rely on predefined lamp characteristics and spatial arrangement. By employing a multi-criteria decision algorithm, our study proposes an optimal design methodology considering several key aspects, including the distance between lamps, their type, power, and light distribution. The goal is to achieve optimal illumination that enhances visibility on public roads for drivers and pedestrians while simultaneously minimizing glare, installation costs and maximizing energy efficiency. The proposed methodology is implemented through an algorithm developed in Matlab, with results validated through simulations in Dialux. This information is used to construct a decision matrix, assessed using the CRITIC method across 180 different scenarios within a specific case study. The findings demonstrate the effectiveness of multi-criteria decision-making as a tool for significantly improving the planning and design of lighting in public illumination systems, allowing for selecting the optimal combination of parameters that ensure the best lighting conditions.

Attribute reduction is a core technique in the rough set domain and an important step in data preprocessing. Researchers have proposed numerous innovative methods to enhance the capability of attribute reduction, such as the emergence of multi-granularity rough set models, which can effectively process distributed and multi-granularity data. However, these innovative methods still have many shortcomings, such as how to deal with complex constraints and how to perform multi-angle effectiveness evaluations. Based on the multi-granularity model, this study proposes a new method of attribute reduction, namely using multi-granularity neighborhood information gain ratio as the measurement criterion. This method combines both supervised and unsupervised perspectives, and by integrating multi-granularity technology with neighborhood rough set theory, constructs a model that can adapt to multi-level data features. This model can select the optimal granularity level or attribute set according to the requirements. Finally, the proposed method is experimented with on 15 UCI datasets against six other attribute reduction algorithms. The experimental outcomes, upon analysis and comparative review, substantiate the reliability and consistency of the attribute reduction approach introduced in this study.

With much more challenging scenarios encountered in engineering, traditional quadrotors couldn’t accomplish all desired missions perfectly. Task-driven based reconfigurable quadrotors have more latent capacity in environment with dense obstacles and narrow corridors. The translational reconfigurable quadrotors and rotational reconfigurable quadrotors are proposed in this presentation, assumptions, mathematical models and related motion control laws are given subsequently, in order to cope with hazard missions, model reference adaptive control laws are proposed, sufficient numerical simulations demonstrate the validity of the proposed control laws.

This paper addresses the critical issue of trust in Artificial Intelligence systems, especially when users might find it challenging to comprehend the internal decision-making processes of such systems. A relevant topic of research in this respect is Theory of Mind, which involves attempting to understand these systems as if they possessed beliefs, desires, and intentions. We focus on the latter: intentions, and we examine how producing explanations based on them can improve \emph{understandability} while allowing for a better interpretation of how they align with human values. We also review some existing methods for identifying intentions in AI systems and we conclude with a discussion on possible future directions in this line of research.

Vulnerabilities in smart contracts may trigger serious security events, and the detection of smart contract vulnerabilities has become a significant problem. In this paper, by using the multi-scale cascade encoder architecture as the backbone, we propose a novel Multi-scale Encoder Vulnerability Detection (MEVD) approach to detect well-known high-risk vulnerabilities in smart contracts. Firstly, we use the gating mechanism to design a unique Surface Feature Encoder (SFE) to enrich the semantic information of code features. Then, by combining a Base Transformer Encoder (BTE) and a Detail CNN Encoder (DCE), we introduce a dual-branch encoder to capture the global structure and local detail features of the smart contract code, respectively. Finally, to focus the model's attention on vulnerability-related characteristics, we employ the Deep Residual Shrinkage Network (DRSN). Experimental results on three types of high-risk vulnerability datasets demonstrate performance compared to state-of-the-art methods, and our method achieves an average detection accuracy of 90%.

It is necessary to manage the power consumption and use fault-tolerance techniques to meet high reliability in Real-Time Embedded Systems, . Hence, in recent years, this is the main reason for providing an ideal approach to decrease power consumption through the worst-case behavior of instantaneous power management (peak-power management), while observing the Thermal Design Power (TDP). Although the multi-core chips in real-time embedded systems provide great opportunity for implementation of Two-phase Triple modular redundancy to meet high reliability, the energy overhead management of concurrently executing tasks is one of the challenges facing designers. In this article, we propose a scheme named Permanent Fault Aware, Two-Phase Peak-Power Management (PFA-TP3M), for scheduling real-time tasks in multi-core systems to eliminate peak power overlap from concurrent running tasks to maintain peak power consumption at the chip TDP. and through mapping different parts of each task on separate cores, prevents consecutive conflicts on cores, which have faced permanent faults to design the fault-tolerant system. Our simulation results show that our proposed scheme provides up to 700x fault tolerance increase (630x on average) compared to the state-of-the-art power management algorithm, an achievement costs up to 14%. (average 11%) increase the length of the task graph compared to it.

Chromatographic separation is a critical technique in the manufacturing processes of both chemical products and biopharmaceuticals. Its principle relies on exploiting the differences in distribution between the stationary and mobile phases to achieve the separation of mixtures. The precision of substance concentration during separation directly impacts the quality and usability of the final product. Therefore, the development of an effective and precise separation control technique has long been a vital concern in the field of chromatographic separation control. Currently, the employment of Simulated Moving Bed (SMB) technology for chromatographic separation, which allows for continuous feed, has been recognized as a cutting-edge technique. SMB is a continuous process technology that enhances the efficiency of adsorbents within the bed. This sequential multi-column SMB technology not only increases production capacity but also reduces the consumption of solvents and water. It is acknowledged as one of the cleanest manufacturing technologies in the biopharmaceutical industry. However, multi-column SMB involves various variables such as flow rates in multiple sections and valve switching times, rendering its system control highly complex. Unlike traditional control objectives that aim to minimize control output errors, the control objective of SMB is to achieve a specific proportion of substance concentration. Consequently, designing and implementing traditional control theories for SMB is challenging, leading to SMB systems largely being controlled based on simple PLC controls. Moreover, these controls are often applicable only to single or a few-column SMB setups, limiting the effectiveness of high-capacity applications. To achieve effective control of SMB, this study employs an adjustable intelligent fuzzy controller with a structure like an approximate neural network (NN) for SMB control research. Simulation results demonstrate that the intelligent controller effectively achieves desirable control outcomes for the SMB system.

This work tackles the problem of image restoration, a crucial task in many fields of applied sciences, focusing on removing degradation caused by blur and noise during the acquisition process. Drawing inspiration from the multi-penalty approach based on the Uniform Penalty principle introduced in [Bortolotti et al. arXiv.math.NA/2309.14163], we develop here a new image restoration model and an iterative algorithm for its effective solution. The model incorporates pixel-wise regularization terms and establishes a rule for parameters selection, aiming to restore images through the solution of a sequence of constrained optimization problems. To achieve this, we present a modified version of the Newton Projection method, adapted to multi-penalty scenarios, and prove its convergence. Numerical experiments demonstrate the efficacy of the method in eliminating noise and blur while preserving the image edges.

Machine learning offers advanced tools for efficient management of radio resources in modern wireless networks. In this study, we leverage a multi-agent deep reinforcement learning (DRL) approach, specifically the Parameterized Deep Q-Network (DQN), to address the challenging problem of power allocation and user association in massive multiple-input multiple-output (M-MIMO) communication networks. Our approach tackles a multi-objective optimization problem aiming to maximize network utility while meeting stringent quality of service requirements in M-MIMO networks. To address the non-convex and nonlinear nature of this problem, we introduce a novel multi-agent DQN framework. This framework defines a large action space, state space, and reward functions, enabling us to learn a near-optimal policy. Simulation results demonstrate the superiority of our Parameterized Deep DQN (PD-DQN) approach when compared to traditional DQN and RL methods. Specifically, we show that our approach outperforms traditional DQN methods in terms of convergence speed and final performance. Additionally, our approach shows 72.2 % and 108.5 % improvement over DQN methods and RL method respectively in handling large-scale multi-agent problems in M-MIMO networks.

This study proposes a method for image matching between infrared(IR)-RGB images using a deep learning network to estimate the deformation field. We propose a deformation field generator (DFG) that estimates the deformation field of the transformation matrix to match each pixel or IR image to the RGB image. DFG is a network that receives IR and RGB images as input; the output size is two channels and has the sample resolution as the input image. By warping the IR image through a grid-sampler that warps the image according to the value of the deformation field, we can obtain a warped IR image that matches the RGB image. Additionally, to check whether the warped IR image matched the RGB image, the masking images detecting the segmentation of objects were photographed in two images. Without directly comparing IR and RGB images, we proposed mask loss that warps the IR mask image through the deformation field and grid sampler and then compares the warped IR mask image with the RGB mask image. Mask loss solves the spatial similarity comparison problem with multi-modality images, such as IR and RGB images, by comparing the mask image with the same modality image as the mask image.

This paper proposes a position recognition method for the receiver coil by the secondary coil current. Based on the practical value of the current of the receiver coil, the position recognition of the receiver coil in the WPT system is realized. This paper proposes a 3×3 array multi-transmitter coil grouping and control logic. The mathematical model of mutual inductance between the receiver and transmitter coil at different positions on the X-Y plane is established. A method for identifying the position of the receiver coil according to the current of the receiver coil is proposed. Compared with the traditional position recognition method of the receiver coil, this method does not need to add a detection coil and position sensor and can realize the position recognition of the receiver coil on the 2D plane.

With a high proportion of distributed photovoltaic and lower fossil energy integrated into the distribution network, it is very difficult to ensure the reliability of power supply. The distributed photovoltaic planning model based on big data is proposed. According to the impact stochastic photovoltaics and loads on reliability planning, the static and dynamic capacity-load ratios are proposed. The big data analysis model of distributed photovoltaic planning is established. The big data multi-scenario generation and reduction algorithm of stochastic distributed photovoltaic and load planning is studied, and a source-load big data scenario matching model is proposed. Ac-cording to the source load big data scenario, the dynamic capacity-load ratio of the distribution network is obtained. The static capacity-load ratio calculation method in distribution network planning is studied to ensure the reliability of power supply. Finally, the IEEE 33-bus system is used as an example. The results show that distributed photovoltaic planning based on big data and multi-scenario methods can improve photovoltaic utilization and power supply reliability.

Reading is a complex cognitive task involving processes from different systems. The present work aims to identify some points of divergence reported in the reading literature and discuss them in a new experimental paradigm framework. Inspired by the paradigms of perceptual identification and rapid parallel presentation (RPVP), we emphasize that the originality of our experimental paradigm lies in the recruitment of multi-stable Arabic percepts within the region where low-level processing occurs (i.e., the visual span area). With good flexibility, the current paradigm has reached higher-order processing levels. In agreement with previous works highlighting the parafoveal-on-foveal effect, results suggest parallel word processing. Furthermore, they suggest a rapid extraction of syntactic and semantic information from words in sentences while attributing an advantage to semantic processing in the emergence of the sentence superiority effect.

The effects of various drawing parameters and annealing processes on the structure and properties of Cu-Ag wires, containing 1 wt% silver, were investigated using specialized equipment including fine wire drawing machines, very fine wire drawing machines, heat treatment equipment, tensile testing machines, microcomputer-controlled electronic universal testers, resistance testers, and scanning electron microscopes. The results revealed that continuous drawing of Cu-1%Ag alloy wires led to elongation of the grains, resulting in a uniform and tightly fibrous microstructure. Moreover, the tensile strength of the alloy wire increased from 670 MPa to 783.9 MPa after a single-pass with a deformation of 14%. Subsequently, when the wire was drawn at a speed of 500 m/min, the tensile strength further increased to 820.1 MPa. After annealing the Փ0.08 mm Cu-1% Ag alloy wire, an increase in annealing temperature up to 500°C resulted in the wire's tensile strength decreasing from 820.1 MPa to 377.5 MPa. Simultaneously, the elongation increased from 1.94% to 15.21%, and the resistivity decreased from 1.931×10-8Ω·m to 1.723×10-8Ω·m. Additionally, when annealing was conducted at a rate of 80 m/min, the wire resistivity dropped to 1.635×10-8Ω·m.

Buildings are responsible for approximately 40% of the world’s energy consumption and 36% of the total carbon dioxide emissions. Building occupancy is essential, enabling Occupant-Centric Control for zero emissions and decarbonization. Although existing machine learning and deep learning methods for building occupancy prediction have achieved remarked progress, their analyses remain limited when applied to complex real-world scenarios. Besides, there is a high expectation for Transformer algorithms to predict building occupancy accurately. Therefore, this paper presents an Occupancy Prediction Transformer network (OPTnet). We fuse and feed multi-sensor data (building occupancy, indoor environmental conditions, HVAC operations) into a Transformer model to forecast the future occupancy presence in multiple zones. We perform experimental analysis and compare it to different occupancy prediction methods (e.g., Decision Tree, Long Short-Term Memory networks, Multi-layer perceptron) and diverse time horizons (1,2,3,5,10,20,30mins). The performance metrics (e.g., Accuracy and Mean Squared Error) are employed to evaluate the effectiveness of prediction algorithms. Our OPTnet method achieves superior performance on our experimental two-week data compared to existing methods. The improved performance signifies its potential to enhance HVAC control systems and energy optimization strategies. We will make the code publicly available at https://github.com/kailaisun/occupancy-prediction-binary to promote transparency and reproducibility.

Buckground: Although ceftazidime/avibactam (CAZ/AVI) has become important option for treating adults and children, no recommendations exist for neonates. We report a neonatal sepsis case due to CAZ/AVI-resistant KPC-2 producing-Klebsiella pneumoniae carrying blaVEB-25 and the use of a customized active surveillance program in conjunction to infection control measures. Methods: The index case was an extremely premature neonate hospitalized for 110 days that had been previously treated with multiple antibiotics. Customized molecular surveillance was implemented at hospital level and enhanced infection control measures were taken for early recognition and prevention of outbreak. Detection and identification of blaVEB-25 was performed by next-generation sequencing. Results: That was the first case of a bloodstream infection caused by KPC producing K. pneumoniae that was resistant to CAZ/AVI without the presence of a metalo-β-lactamase in the multiplex PCR platform in a neonate. All 36 additional patients tested (12 in the same NICU and 24 from other hospital departments) carried wild-type blaVEB-1 but they did not harbor blaVEB-25. Conclusion: The emergence of VEB-25 is signal for horizontal transfer of plasmids at hospital facilities and it is of greatest concern for maintaining a sharp vigilance for surveillance of novel resistance mechanisms. Molecular diagnostics can guide appropriate antimicrobial therapy and early implementation of infection control measures against antimicrobial resistance.

Current effort with light field displays is mainly concentrated on the widest possible viewing angle, while a single viewer only needs to view the display in a specific viewing direction. To make light field display a practical practice, a super multi-view light field display is proposed to compress the information in the viewing zone of a single user by reducing the redundant viewpoints. A quasi-directional backlight is proposed and a lenticular lens array is applied to achieve the restricted viewing zone. Eye-tracking technique is applied to extend the viewing area. Experimental results show that the proposed scheme can present vivid 3D scene with smooth motion parallax. Only 16.7% conventional light field display data are required to achieve 3D display. Furthermore, an illumination power of 3.5 watt is sufficient to lighten a 31.5-inch light field display，which takes up 1.5% of the illumination power required for planar display of similar configuration.

In this paper, we extend the Merton model of investment in discrete time to the cases when there is a finite number of investors and the market is with frictions represented by convex penalty functions defined for each investor. In the main result of this paper, we proved the existence of optimal strategy of investment by using a new approach based on the formulation of an equivalent general equilibrium economy model.

For the ground-state properties of gas-phase nanomolecules with multi-reference character, thermally-assisted-occupation density functional theory (TAO-DFT) has been recently found to outperform the widely used Kohn-Sham density functional theory, when the conventional exchange-correlation energy functionals are employed. Aiming to explore solvation effects on the ground-state properties of nanomolecules with multi-reference character at a minimal computational cost, we combine TAO-DFT with the polarizable continuum model (PCM). To show its usefulness, TAO-DFT-based PCM (TAO-PCM) is employed to study the electronic properties of linear acenes in three different solvents (toluene, chlorobenzene, and water). According to TAO-PCM, in the presence of these solvents, the smaller acenes should have nonradical nature, and the larger acenes should have increasing polyradical nature, showing remarkable similarities to the past findings in the gas phase.

Given the importance of menstrual blood in the pathogenesis of endometriosis and the multifunctional roles of menstrual mesenchymal stem cells (MenSCs) in regenerative medicine, this issue has gained prominence in the scientific community. Moreover, recent reviews highlight how robust the integrated assessment of omics data is for endometriosis. To our knowledge, no study has applied the multi-omics approaches to endometriosis MenSCs. It is a case-control study at a university-affiliated hospital. MenSCs transcriptome and proteome data were obtained by RNA-seq and UHPLC-MS/MS detection. Among the differentially expressed proteins and genes, we emphasize ATF3, ID1, ID3, FOSB, SNAI1, NR4A1, EGR1, LAMC3, and ZFP36 genes and MT2A, TYMP, COL1A1, COL6A2, and NID2 proteins that were already reported in the endometriosis. Our functional enrichment analysis reveals integrated modulating signaling pathways such as epithelial-mesenchymal transition (↑) and PI3K signaling via AKT to mTORC1 (↓in proteome), mTORC1 signaling, TGF beta signaling, TNFA signaling via NFkB, and response to hypoxia via HIF1A targets (↑in transcriptome). Our findings highlight primary changes in the endometriosis MenSCs, suggesting that the chronic inflammatory endometrial microenvironment can modulate these cells, providing opportunities for endometriosis etiopathogenesis. Moreover, they identify challenges for future research leveraging knowledge for regenerative and precision medicine in endometriosis.

The prediction of drug-target interactions plays a fundamental role in facilitating drug discovery, where the goal is to find prospective drug candidates. With the increase in the number of drug-protein interactions, machine learning techniques, especially deep learning methods, have become applicable for drug-target interaction discovery because they significantly reduce the required experimental workload. In this paper, we present a spontaneous formulation of the drug-target interaction prediction problem as an instance of multi-instance learning. We address the problem in three stages, first organizing given drug and target sequences into instances via a private-public mechanism, then identifying the predicted scores of all instances in the same bag, and finally combining all the predicted scores as the output prediction. A comprehensive evaluation demonstrates that the proposed method outperforms other state-of-the-art methods on three benchmark datasets.

Land cover mapping provides spatial information on the physical properties of the Earth’s surface, for various classes of wetlands, artificial surface and constructions, vineyards, water bodies, etc. Having reliable information on land cover is crucial to developing solutions to a variety of environmental problems such as destruction of important wetlands/forests, and loss of fish and wildlife habitats. This has made land cover mapping one of the most widespread application areas in remote sensing computational imaging. However, due to the differences between modalities in terms of resolutions, content, and sensors, integrating complementary information that multi-modal remote sensing imagery exhibits into a robust and accurate system still remains challenging, and classical segmentation approaches generally do not give satisfactory results for land cover mapping. In this paper, we propose a novel dynamic deep network architecture, AMM-FuseNet, that promotes the use of multi-modal remote sensing images for the purpose of land cover mapping. The proposed network exploits the hybrid approach of the Channel Attention mechanism and Densely Connected Atrous Spatial Pyramid Pooling (DenseASPP). In the experimental analysis, in order to to verify the validity of the proposed method, we test AMM-FuseNet applied to four datasets whilst comparing it to the 6 state-of-the-art models of DeepLabV3+, PSPNet, UNet, SegNet, DenseASPP, and DANet. In addition, we also demonstrate the capability of AMM-FuseNet under minimal training supervision (reduced number of training samples) compared to the state-of-the-art, achieving less accuracy loss even for the case with 1/20 of the training samples.

Pedestrian multi-target tracking technology plays an important role in artificial intelligence, driverless, virtual reality and other fields. The pedestrian multi-target tracking algorithm DeepSORT based on detection is widely used in industry. It mainly tracks multiple pedestrian targets continuously and keeps their ID unchanged. In order to improve the applicability and tracking accuracy of DeepSORT algorithm, this paper improved the IOU distance measurement in the matching process. At the same time, ResNet50 is used as the feature extraction backbone network, and combined with FPN (Feature Pyramid Network), the appearance features of multi-layer pedestrians are fused to improve the tracking accuracy of DeepSORT algorithm. The proposed algorithm is verified on the public data set MOT-16 and it’s tracking accuracy is enhanced to 4.1%.

The present paper is concerned with the study of the quality of life index. Such an index has become an important index for measuring the well-being of individuals. However, the quality of life index is always a subjective, intangible, and often hard to quantify with precision due to the lack of quantitative models dealing with. The main goal of the present paper is thus to propose a mathematical, quantitative model for the measurement of a quality of life index. The main novelty is firstly the construction of a wavelet dynamic multiscale model to quantify and investigate the effect of time scale on the quality of life index measuring. The proposed procedure is acted empirically on a sample corresponding to Saudi Arabia as a case of study during the period from 2003 to 2020 as part of the 2030-vision plan. Saudi Arabia has implemented the so-called 2030-vision plan where the quality of life improvement is one of the main goals to be attempted. The findings show that wavelets are capable to localize the time-wise behavior of the index contrarily to classical studies which estimate a global view of the index. Moreover, the study shows the link between the quality of life behavior and many other indices.

In this study, a new method for synthesizing Au-NaYF4:Yb3+/Er3+-DSPE-PEG2K nanocomposites was introduced. Using a hydrothermal method, the synthesized Yb3+- and Er3+-codoped NaYF4 upconversion luminescent materials and Au nanoparticles were doped into upconversion nanomaterials and modified with DSPE-PEG2k up-conversion nanomaterials. This material is known as Ag-UCNPs-DSPE-PEG2k, it improves both the luminous intensity because of the doped Au nanoparticles and has low cytotoxicity because of the DSPE-PEG2k modified. Exciting UCNPs with a wavelength of 980nm near-infrared light will emit light with a wavelength of 520nm to further excite gold nanoparticles to convert light energy into heat. Successful synthesized gold nanoparticles was confirmed using transmission electron microscopy (TEM). The morphology of UCNPs was observed using scanning electron microscopy (SEM), and the mapping confirmed the successful doping of Au nanoparticles. Fluorescence spectra were used to compare changes in luminescence intensity before and after doping Au nanoparticles. The cytotoxicity of Au-UCNPs-DSPE-PEG2K was tested via the cell counting kit-8 (CCK-8) method, and its imaging ability was characterized using the Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) method.

Background: The COVID-19 pandemic has disproportionately affected people from more deprived communities. The experience of Long Covid is similarly distributed but very few investigations have concentrated on the needs of this population. The aim of this project was to co-produce an acceptable intervention for people with Long Covid, living in communities recognised as more deprived. Methods: The intervention was based on a multi-disciplinary team using approaches from sport and exercise medicine and functional rehabilitation. The co-production process was undertaken with a stakeholder advisory group and patient public involvement representation. This study identified participants by postcode and the indices of multiple deprivation (IMD); recruitment and engagement were supported by an existing health and wellbeing service. A virtual ‘clinic’ was offered with a team of professional practitioners who met participants three times each; to directly consider their needs and offer structured advice. The acceptability of the intervention was based on the individual’s participation and their completion of the intervention. Results: Ten participants were recruited with eight completing the intervention. The partnership with an existing community health and wellbeing service was deemed to be an important way of reaching participants. Two men and six women ages ranging from 38 to 73 were involved and their needs were commonly associated with fatigue, anxiety and depression with overall de-conditioning. None reported serious hardship associated with the pandemic although most were in self-employment/part-time employment or were not working due to retirement or ill-health. Two older participants lived alone, and others were single parents and had considerable challenges associated with managing a household alongside their Long Covid difficulties. Conclusions: This paper presents the needs and perspectives of eight individuals involved in the process and discusses the needs and preferences of the group in relation to their support for self- managed recovery from Long Covid.

A graph based path planning method consisting of off-line part and on-line part for multi-UAV system in windy condition is proposed. In the off-line part, the task area is divided into grids. When two nodes is close enough, they are connected and weighted by the cost, obtained by solving an optimization problem based on difference method, between them. In order to ensure the accuracy of the difference method, the adjacent radius is set to be small enough. In order to ensure the generated paths close to analytical solution, the grid size is set to be much smaller than the adjacent radius. The shortest path algorithm is used to update the adjacent matrix and path matrix. In the on-line part, the target position assignment and optimal velocity can be obtained by accessing the adjacent matrix and path matrix. At the end of this paper, some numerical examples are taken to illustrate the validity of our method and the influence of the parameters.

To realize precise control of the quantum dots (Qdots) device, multi-channel precision bias source plays the key role. In this paper, the 16-channel high precision bias source with 18-bit resolution for Qdots device was designed. The prototype was made and its performance was tested. The short time fluctuations can reach 50μV. The step response time is less than 3μs. The resolution, stability, linearity and dynamic range of the bias source exhibits good performance. What's more, the bias source can be controlled locally and online. The results show that it is one effective and feasible topology for experiments in Qdots device application.

Identifying cracks in the incipient state is essential to prevent the failure of engineering structures. Detection methods relying on the analysis of the changes in modal parameters are widely used because of the advantages they present. In our previous research, we have found that eigenfrequencies were capable of indicating the position and depth of damage when sufficient vibration modes were considered. The damage indicator we developed was based on the relative frequency shifts (RFS). To calculate the RFSs for various positions and depths of a crack, we established a mathematical relation that involved the squared modal curvatures in the healthy state and the deflection of the healthy and damaged beam under dead mass, respectively. In this study, we propose to calculate the RFS for beams with several cracks by applying the superposition principle. We demonstrate that this is possible if the cracks are far enough from each other. In fact, if the cracks are close to each other, the superposition method does not work and we distinguish two cases: (i) when the cracks affect the same beam face, the frequency drop is less than the sum of the individual frequency drops, and (ii) on the contrary, cracks on opposite sides cause a decrease in frequency, which is greater than the sum of the frequency drop due to individual damage. When the RFS curves are known, crack assessment becomes an optimization problem, the cost function being the distance between the measured RFSs and all possible RFSs for several vibration modes. Thus, the RFS constitutes a benchmark that characterizes damage using only the eigenfrequencies. We can accurately locate multiple cracks and estimate their severity trough experiments and thus prove the reliability of the proposed method.

The paper describes problems with the current additive manufacturing chain before considering additive manufacturing as part of a modern manufacturing chain. Additive manufacturing can be used for near net-shape for finishing, for repair or for adding special features which cannot be made with traditional manufacturing. This paper describes how STEP-NC deals with these different scenarios in terms of accuracy, multi-material and variation of slice direction. The possibilities of multi-material objects also raises questions about the design of such objects and how these need to be handled by an advanced controller. The paper also describes non-planar slicing. Curved direction and cylindrical direction are shown to improve the accuracy of curved structure additive manufacturing. STEP-NC using boundary representation has better capability of depicting complex internal structures for additive processes. By using exact model of the final product represented by STEP-NC, the paper demonstrates improvements in data size reduction, slicing accuracy, and precise manipulation of internal structure.

Multi-criteria decision-making (MCDM) methods and techniques have been applied to many real-world problems in different fields of engineering science and technology. The evaluation based on distance from average solution (EDAS) method is a new and efficient MCDM method. The aim of this study is to propose a modification to address two exceptional cases in which the EDAS method fails to solve an MCDM problem.

Hydraulic conductivity is the key and one of the most uncertain parameters in groundwater modeling. The grid based numerical simulation require spatial distribution of sampled hydraulic conductivity at un-sampled locations in the study area. This spatial interpolation has been routinely performed using variogram based models (two-point geostatistics methods). These traditional techniques fail to capture the complex geological structures, provides smoothing effects and ignore the higher order moments of subsurface heterogeneities. In this work, a multiple-point geostatistics (MPS) method is applied to interpolate hydraulic conductivity data which will be further used in WASH123D numerical groundwater simulation model for regional smart groundwater management. To do this, MPS need ‘training images (TIs) as a key input. TI is a conceptual model of subsurface geological heterogeneity which was developed by using concept of ages, topographic slope as an index criteria and knowledge of geologist. After considerations of full physics of study area, an example shows the advantages of using multiple-point geostatistics compared with the traditional two-point geostatistics methods (such as Kriging) for the interpolation of hydraulic conductivity data in a complex geological formation.

Mining interspecies interactions remain a challenge due to the complex nature of microbial communities and the need for computational power to handle big data. Our meta-analysis indicates that genetic potential alone does not resolve all issues involving mining of microbial interactions. Nevertheless, it can be used to define the building blocks to infer synergistic interspecies interactions and to limit the search space (i.e., number of species and metabolic reactions) to a manageable size. A reduced search space decreases the number of additional experiments necessary to validate the inferred putative interactions. As validation experiments, we examine how multi-omics and state of the art imaging techniques may further improve our understanding of species interactions’ role in ecosystem processes. Finally, we analyze pros and cons from the current methods to infer microbial interactions from genetic potential and propose a new theoretical framework based on: (i) genomic information of key members of a community; (ii) information of ecosystem processes involved with a specific hypothesis or research question; (iii) the ability to identify putative species’ contributions to ecosystem processes of interest; and, (iv) validation of putative microbial interactions through integration of other data sources.

The proportion of area under various crops at a given point in time, known as a cropping pattern, plays an essential role in determining the level of agricultural production. In this study, cropping patterns of three sub-counties in Murang’a County, a typical African smallholder farming area in Kenya, were mapped. Specifically, we compared the performance of eight classification scenarios for mapping cropping patterns; namely using (i) only Sentinel-2 reflectance bands (S2), (ii) S2 and S2 derived vegetation indices (VIs); (iii) S2 and S2 vegetation phenology (VP); (iv) S2 and Sentinel-1 radar backscatter data (S1); (v) S2, VIs, and S1; (vi) S2, VP, and S1; (vii) S2, VIs and VP, and (viii) S2, VIs, VP and S1. Reference data of the dominant cropping patterns and non-croplands were collected. The guided regularized random forest (GRRF) algorithm was used to select the optimum variables and to perform the respective classification for each scenario. The most accurate result of the overall accuracy of 93.16% was attained from the scenario (viii) S2, VIs, VP, and S1. The McNemar’s test of significance did not show significant differences (p≤0.05) among the tested scenarios. Our study demonstrated the strength of GRRF and the synergetic advantage of S2 and S1 derivatives to map cropping patterns in a heterogeneous landscape where high resolution imagery are inaccessible. Our cropping pattern mapping approach can be used in other sites of relatively similar agro-ecological conditions.

In research applications across several areas, noise removal is indispensable for accuracy of final results. Noise is caused due to physical principals, such as background electronic noise, quantum effect, and wave rebound effect to name a few. Noise removal can help improve results in medical, astronomy, defense, and numerous other fields. Addressing this limitation would result in potentially low cost, automatic, and reliable systems. In this paper, a generalized new approach i.e. Multi-Frame Noise Removal (MFNR) is proposed for noise removal. Given any type of data, the probability density function (PDF) of the noise can be determined. Herein, we extracted the noise PDF parameters using KDE (Kernel Density Estimation). Because the data is corrupted by “deterministic” noise, hence can be cleaned. This could be used as a general purpose noise removal tool. The data point with same position in multiple frames helps us determine the noise PDF characteristics and hence making it possible to remove noise. The conventional wisdom which states that noise removal and detail preservation are contrary to each other is not true for MFNR. Experimental results validate our proposed method which showed practically complete noise reduction based on number of frames used, as compared to existing benchmark methods.

The interaction between single or a fixed number of photons with a single absorber is of fundamental interest in quantum technology. The harnessing of light matter interactions at the single particle limit has several potential applications ranging from quantum communication and quantum metrology to quantum imaging. In this letter, a setup for heralded two-photon absorption at the single absorber level is proposed. The setup is based on a heralded two-photon source utilizing spontaneous parametric down-conversion, entanglement swapping and sum frequency generation for joint detection. The feasibility of the scheme is discussed by reviewing recent achievements in utilizing entangled and correlated photons for two-photon absorption as well as single photon absorption experiments at the limit of single absorbers in the context of applications in imaging (here mainly microscopy) and spectroscopy.

Changes in land-use have been observed in banana-based systems in the African Great Lakes region affected by Xanthomonas wilt disease (XW) of banana. Through participatory focus group discussions (FGDs) and the 4-cell method, changes in land-use were retrospectively assessed in 13 XW-affected landscapes/villages along a 230 km transect from Masisi (XW arrived in 2001) to Bukavu (XW arrived around 2014) in eastern Democratic Republic of Congo during 2015. The four-cell chart ranked land-use by mapping the area under production and the number of households involved in production. Farmers’ perceptions on the sustainability of new land-uses were also documented. Soil nutrient content and erosion levels were measured for five major land-use options/ trajectories on 147 fields across 55 farms in three landscapes along the transect. From being ranked the most important crop (92% of landscapes i.e. produced on large areas of land and by many households) before XW outbreaks, its importance had declined with most households in 36% of the landscapes growing it on smaller farms while in 64% of cases by few households on smaller pots. Farmers uprooted entire banana mats or fields, expanding land under other crops, mainly beans, taro, sweet potato, cassava, maize, coffee and eucalyptus. Species richness did not change at landscape level, though 21 crops were introduced at farm level. Land-use for banana is however still perceived to be more sustainable due to its multi-functional roles. Soils under banana plots were found in general to be better in their chemical attributes while high erosion levels (Mg ha-1 year-1) were observed under cassava (1.7-148.9) compared with banana (0.3-10.7) and trees (0.3-5.9). The current shift away from banana could thus have profound effects on supply of key services and sustainability of the production systems. This study offers a good basis/entry point for interventions in the XW-affected landscapes.

Accurate channel estimation is of utmost importance for massive MIMO systems that allow providing significant improvements in spectral and energy efficiency. In this work, we investigate the spectral efficiency performance and present a channel estimator for multi-cell massive MIMO systems subjected to pilot-contamination. The proposed channel estimator performs well under moderate to aggressive pilot contamination scenarios without prior knowledge of the inter-cell large-scale channel coefficients and noise power. The estimator approximates the performance of a linear Minimum Mean Square Error (MMSE) as the number of antennas increases. Following, we derive a lower bound closed-form spectral efficiency of the Maximum Ratio Combining (MRC) detector in the proposed channel estimator. The simulation results highlight that the proposed estimator performance approaches the linear minimum mean square error (LMMSE) channel estimator asymptotically.

Accurate channel estimation is of utmost importance for massive MIMO systems to provide significant improvements in spectral and energy efficiency. In this work, we present a study on the distribution of a simple but yet effective and practical channel estimator for multi-cell massive MIMO systems suffering from pilot-contamination. The proposed channel estimator performs well under moderate to aggressive pilot contamination scenarios without previous knowledge of the inter-cell large-scale channel coefficients and noise power, asymptotically approximating the performance of the linear MMSE estimator as the number of antennas increases. We prove that the distribution of the proposed channel estimator can be accurately approximated by the circularly-symmetric complex normal distribution, when the number of antennas, M, deployed at the base station is greater than 10.

Existing methods for detecting magnetic leakage signals from damaged wire ropes require axial saturation magnetisation, and the accuracy of the detection equipment depends on the saturation degree of magnetisation. Moreover, the expected magnetisation effect is usually difficult to achieve owing to the special characteristics of the rope structure, diameter, and operating environment of the wire rope. Consequently, in addition to other issues, the detection accuracy and versatility of the equipment are low. In this study, a method based on spatial multidimensional orthogonal array loop magnetisation for detecting mine wire rope defects is proposed. Firstly, a new sensor excitation structure model is developed. Then a method of radiant magnetic flux of permanent magnet array is analysed, and the influence law of the number of permanent radiant magnetic blocks on the magnetisation effect is studied. In addition, a method of wire rope detection based on the principle of clustering is investigated, according to which the influence law of the shape, structure, and size of the polyurethane device on the effect of magnetisation is discussed. Finally, through laboratory experiments, the test model and proposed method are verified. The results show that the magnetisation effect is better and more cost-effective when the number of permanent magnet radiation magnetic block is n=8, and the proposed detection method can effectively distinguish damaged wire rope joints. Furthermore, the proposed equipment achieved signal-to-noise ratio of the signals, improving the reliability of damage detection.

Negative corona discharges occur widely in high voltage transmission lines and charged aircraft, which can cause strong electromagnetic interference. Negative corona discharge is typically performed simultaneously at multiple discharge points. In this study, the current and its EM radiation characteristics of single-needle and multi-needle negative corona discharge in different conditions were tested. The current and electromagnetic radiation characteristics of the two discharge structures were compared. The dipole radiation model was established to analyze the EM radiation characteristics of the negative corona discharge.The results show that, It is only when the voltage reaches a certain threshold that the current and electromagnetic radiation fields of the multi-needle discharge structure will be superimposed and their amplitudes will increase significantly. The frequency of electromagnetic radiation signal does not change with the number of needles, cathode geometry and applied voltage, but only depends on ambient pressure. It provides a basis for detecting corona discharge sources under different conditions.

In the oil palm industry, stands age is an important parameter to monitor the sustainability of cultivation, to develop the growth yield model, to identify the disease or stressed area, and to estimate the carbon storage capacity. This research is focused to estimate and distinguish oil palm stands age based on crown/ canopy density obtained using Forest Canopy Density (FCD) model derived from four indices as follows; Advanced Vegetation Index, Bare Soil Index, Shadow Index, and Thermal Index. FCD model employs multi temporal image analysis resulting four classes of oil palm stands age categorized as seed with FCD value of 29–56% (0 years), young with FCD value of 56–63% (1–9 years), teen with FCD value of 63–80% (10–15 years), and mature with FCD value of >80% (>15 years). Minimum canopy density value is 29% even in the zero years old indicates incomplete land clearance or the type of seed planted in the land.

With quick improvement in the field of network, everything becomes online. Remote user authentication is a mechanism in which remote server verify the correctness of user over common or public channel. Remote user authentication can be Single server authentication or Multi server authentication. The disadvantage of single server authentication is that the user needs to recall user id and password for each service, he/she need to utilize, however it can overcome by Multi-server authentication in which user needs to register himself with Registration Center (RC) for the first run through and after that onwards he can utilize each service (which are given by servers, associated with RC) by recollecting only one user id and password. In this paper, we analyze Chen's authentication scheme (based on multi server authentication) and show that this scheme is vulnerable to password guessing attack, replay attack, RC spoofing attack, session key verification attack and perfect forward secrecy attack. In this Paper, we propose a biometric based remote user authentication scheme in multi-server environment. Proposed scheme is more secure and efficient as compared to chen's scheme\cite{23}.

UAS-based multi-spectral imagery is becoming increasingly popular for the improved monitoring and managing of various horticultural crops. However, for UAS data to be used as an industry standard for assessing tree structure and condition as well as production parameters, it is imperative that the appropriate data collection and pre-processing protocols are established to enable multi-temporal comparison. There are several UAS-based radiometric correction methods commonly used for precision agricultural purposes. However, their relative accuracies have not been assessed for data acquired in complex horticultural environments. This study assessed the variations in estimated surface reflectance values of different radiometric corrections applied to multi-spectral UAS imagery acquired in both avocado and banana orchards. We found that inaccurate calibration panel measurements, inaccurate signal-to-reflectance conversion, and high variation in geometry between illumination, surface, and sensor viewing produced significant radiometric variations in at-surface reflectance estimates. Potential solutions to address these limitations included appropriate panel deployment, site-specific sensor calibration, and appropriate BRDF correction. Future UAS based horticultural crop monitoring can benefit from the proposed solutions to radiometric corrections to ensure they are using comparable image-based maps of multi-temporal biophysical properties.

There is an ongoing global pandemic of human respiratory syncytial virus (RSV) infection that results in substantial annual morbidity and mortality. In Australia, RSV is the major cause of acute lower respiratory tract infections (ALRI). Nevertheless, little is known about the extent and origins of genetic diversity of RSV in Australia, nor the factors that shape this diversity. We conducted a genome-scale analysis of RSV infections in New South Wales (NSW). RSV genomes were successfully sequenced for 144 specimens collected between 2010-2016. Of these, 64 belonged to the RSVA and 80 to the RSVB subtype. Phylogenetic analysis revealed a wide diversity of RSV lineages within NSW and that both subtypes evolved rapidly in a strongly clock-like manner, with mean rates of approximately 6-8 x 10^-4 nucleotide substitutions per site per year. There was only weak evidence for geographic clustering of sequences, indicative of fluid patterns of transmission within the infected population, and no evidence of any clustering by patient age such that viruses in the same lineages circulate through the entire host population. Importantly, we show that both subtypes circulated concurrently in NSW with multiple introductions into the Australian population in each year, and only limited evidence for multi-year persistence.

We describe a multi-resolution approach for audio classification and illustrate its application to the open data set for environmental sound classification. The proposed approach utilizes a multi-resolution based ensemble consisting of targeted feature extraction of approximation (coarse scale) and detail (fine scale) portions of the signal under the action of multiple transforms. This is paired with an automatic machine learning engine for algorithm and parameter selection and the LSTM algorithm, capable of mapping several sequences of features to a predicted class membership probability distribution. Initial results show an improvement in multi-class classification accuracy.

Abstract: Comparing outcrop data to laboratory results is important to verify and validate experiments of analogue and reservoir materials especially regarding conditions for deformation experiments. This is important better understand highly complex carbonate reservoir strata and their response to changes in subsurface conditions, reducing subsurface uncertainty. This study develops methods to allow for a more straightforward comparison of outcrop data (m-scale) with experimentally created fracture arrays developed in cylindrical samples (cm-scale). The main objective is to assess usefulness of experimentally-produced fracture networks as analogues for subsurface structures, typically at the meter and above scale by developing new techniques to use the lab deformation. It analyses key characteristics of laboratory-induced fracture networks by adapting scanline methods to use with x-ray tomography (XRT) images to allow for comparison with outcrop and field data. To test and verify these new methods two low permeability carbonate samples were used for deformation testing and analysis. Applying the different scanline methods we show that they can be used to analyse lab induced fractures (mm to cm-scale) identified in XRT images for comparison with outcrop data (m-scale). In addition, these methods also allow for quantification of fracture network attributes e.g. fracture spacing, fracture apertures, orientation. This new data bridges the gap between micro-scanlines using thin sections and outcrop scanlines.

The RPL protocol is a routing protocol for low power and lossy networks. In such a network, energy is a very scarce resource; so many studies are focused on minimizing global energy consumption. End-to-end latency is another important performance indicator of the network, but existing research tends to focus more on energy consumption and ignore the end-to-end delay of data transmission. In this paper, we propose a kind of energy equalization routing protocol to maximize the surviving time of the restricted nodes so that the energy consumed by each node is close to each other. At the same time, a multi-path forwarding route is proposed based on the cache utilization. The data is sent to the sink node through different parent nodes at a certain probability, not only by selecting the preferred parent node, thus avoiding buffer overflow and reducing end-to-end delay. Finally, the two algorithms are combined to accommodate different application scenarios. The experimental results show that the proposed three improved schemes improve the reliability of the routing, extend the lifetime of the network, reduce the end-to-end delay, and reduce the number of DAG reconfiguration.

Recent analyses of cosmic microwave background surveys have revealed hints that there may be a non-trivial running of the running of the spectral index. If future experiments were to confirm these hints, it would prove a powerful discriminator of inflationary models, ruling out simple single field models. We discuss how isocurvature perturbations in multi-field models can be invoked to generate large runnings in a non-standard hierarchy, and find that a minimal model capable of practically realising this would be a two-field model with a non-canonical kinetic structure. We also consider alternative scenarios such as variable speed of light models and canonical quantum gravity effects and their implications for runnings of the spectral index.

The weight coefficients of the diaphragm spring depend on experiences in the traditional optimization. However, this method not only cannot guarantee the optimal solution but it is also not universal. Therefore, a new optimization target function is proposed. The new function takes the minimum of average compress force changing of the spring and the minimum force of the separation as total objectives. Based on the optimization function, the result of the clutch diaphragm spring in a car is analyzed by the non-dominated sorting genetic algorithm (NSGA-II) and the solution set of Pareto is obtained. The results show that the pressing force of the diaphragm spring is improved by 4.09%by the new algorithmand the steering separation force is improved by 6.55%, which has better stability and steering portability. The problem of the weight coefficient in the traditional empirical design is solved. The pressing force of the optimized diaphragm spring varied slightly during the abrasion range of the friction film, and the manipulation became remarkably light.

The airport ground handling service (AGHS) equipment vendor selection (AGHSEVS) problem is critical for ramp work safety management, because AGHS equipment malfunctions affect airport ramp work safety. Appropriate vendor selection can prevent aircraft damage and delays in airlines schedules, and ensure reliable and high-quality ground handling service. The AGHSEVS problem is a time-consuming and complex process that requires professional knowledge and experience to make judgments. Specifically, AGHSEVS is a multi-criteria decision-making (MCDM) problem. Previous research has seldom integrated MCDM methods with linear and goal programming to solve the AGHSEVS problem. The objective of this study was to develop a new system evaluation model for AGHSEVS by considering both qualitative and quantitative methods. We test the proposed approach on an AGHS company in Taiwan.

Accurate and reliable mid-long runoff prediction (MLTRP) is of great importance in water re-sources management. However the MLTRP is not suitable in each basin and how to evaluate the applicability of MLTRP is still a question. Therefore, the total mutual information (TMI) index is developed in this study based on the predictor selection method using mutual information (MI) and partial MI (PMI). The relationship between the TMI and the predictive performance of five models is analyzed by applying five models in 222 forecasting scenarios in Australia. The results over 222 forecasting scenarios demonstrate that, compared with the MI, the developed TMI index can better represent the available information in the predictors, and has more significant negative correlation with the RRMSE with the correlation coefficient between -0.62 and -0.85. This means the model's predictive performance will become better along with the increase of TMI, and there-fore the developed TMI index can be used to evaluate the applicability of MLTRP. When TMI is more than 0.1, the available information in the predictors can support the construction of MLTRP models. In addition, the TMI is used to partly explain the difference of predictive performance among five models. In general, the complex models, which can better utilize the contained infor-mation, are more sensitive to the TMI, and have more significant improvement in terms of predic-tive performance along with the increase of TMI. This research can provide support for the study of MLTRP.

The aim of the study was to examine the long-term prognostic value of changes in cardio-ankle vascular index (CAVI) within a year after coronary artery bypass grafting (CABG). Methods. Patients with coronary artery disease (n = 251) in whom cardio-ankle vascular index (CAVI) was assessed using the VaSera VS-1000 device before and in a year after CABG. Groups with improved CAVI (CAVI decreased from pathological value to normal or the index remained within normal values) or worsened CAVI (persistent pathological index value or an increase in CAVI to pathological values or an increase of 1 unit or more) were identified. The groups were compared for the following events at 10-year follow-up: death from all causes, myocardial infarction, stroke/transient ischemic attack, and the combined endpoint. Results. A year after CABG surgery, 45% of patients showed positive dynamics or stable normal CAVI values. Death from all causes was significantly more common in the group with CAVI progression - 32 (27.6%) than in the group with CAVI improvement - 14 (14.8%; p = 0.029). Patients with CAVI progression were more likely to have MACE (death, MI, stroke/TIA) in 49 (42.2%) cases, compared with patients with CAVI improvement - in 23 (24.5%; p=0.008). Negative dynamics of CAVI (p = 0.024), number of shunts (p = 0.006), and the presence of carotid stenosis more than 30% (p = 0.051) were independent predictors of death from all causes at 10-year follow-up after CABG. The presence of carotid stenosis more than 30% (p = 0.002) and the group with negative dynamics of CAVI after a year (p = 0.008) were independent predictors of the development of the combined endpoint during long-term follow-up. Conclusions. Patients with negative dynamics of CAVI one year after CABG were more likely to experience death from all causes and combined endpoint in the long-term follow-up than patients with normal CAVI. In further studies, it is advisable to evaluate the dynamics of CAVI and, based on this, identify the most effective interventions to improve the prognosis of patients after CABG.

This research investigates the application of deep learning in sentiment analysis of Canadian maritime case law. It offers a framework for improving maritime law and legal analytics policy-making procedures. The automation of legal document extraction takes center stage, underscoring the vital role sentiment analysis plays at the document level. Therefore, this study introduces a novel strategy for sentiment analysis in Canadian maritime case law, combining sentiment case law approaches with state-of-the-art deep learning techniques. The overarching goal is to systematically unearth hidden biases within case law and investigate their impact on legal outcomes. Employing Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM) based models, this research achieves a remarkable accuracy of 98.05% for categorizing instances. In contrast, Conventional Machine Learning techniques such as Support Vector Machines (SVM) yield an accuracy rate of 52.57%, Naive Bayes at 57.44 %, and Logistic Regression at 61.86%. The superior accuracy of the CNN and STM model combination underscores its usefulness in legal sentiment analysis, offering promising future applications in diverse fields like legal analytics and policy design. These findings mark a significant choice for AI-powered legal tools, presenting more sophisticated and sentiment-aware options for the legal profession.

Non-pharmaceutical interventions (NPIs), including social distancing, wearing personal protective equipment, and lockdown measures, have been at the forefront of outbreak control in nursing homes. We used a mixed methodology to assess which NPIs nursing homes in the canton of Geneva, Switzerland, followed for their staff and residents during the first wave of the pandemic, between March 1, 2020 and June 1, 2020. For the qualitative component, we interviewed the attending physicians and/or director of each nursing home. Based on in-vivo codes, NPIs for nursing home workers and residents in each nursing home were thematically classified as: maximally restrictive, moderately restrictive, and minimally restrictive. In the quantitative component, we calculated incident rate ratios (IRR) for infection between the three levels of COVID-19-related measures taken in these nursing homes. We found an equal distribution of maximally (n=4), moderately (n=4), and minimally (n=4) restrictive NPIs. The extent of restriction did not show to be significantly associated with the cumulative incidence of COVID-19 cases among residents (maximally restrictive IRR = 3.90, 95%CI 0.82-45.54, p = 0.184; moderately restrictive IRR = 3.55, 95%CI 0.75-41.42, p = 0.212 ; minimally restrictive IRR = reference). Variabilities in NPIs adopted by nursing homes, and the number of COVID-19 cases appear to be randomly affected.

Evaluation of the patients after the surgical correction of idiopathic scoliosis in long-term follow-up with the clinical neurophysiology methods has not been presented in detail. This study aimed to compare the results of the neurophysiological studies in 45 girls with scoliosis of Lenke 1-3 types performed pre- (T0), postoperatively (T1, one week after surgery), and 6 months after the surgery (T2). Parameters of surface electromyography during the attempt of maximal contraction (mcsEMG) and transcranially evoked motor evoked potentials (MEP) recorded from anterior tibial muscles, as well as the electroneurography (ENG) of peripheral transmission in the peroneal nerve motor fibers were compared. The results indicate that efferent neural conduction function both centrally and peripherally as well as TA muscle function improve immediately after surgical correction of scoliosis (at p=0.05) and further normalization appears after six months in long-term follow-up (at p=0.03). It has been found in sEMG recordings, that the TA muscle motor unit recruitment function after half a year from surgical treatment in IS patients is comparable to the normal condition. ENG recordings results indicated the gradual retreat of the motor fibers injury symptoms mainly of the axonal type in peroneal nerves, the surgeries improved also the lumbar ventral roots’ neural transmission to the functional status considered as normal. MEP amplitude parameters recorded after the surgical scoliosis correction in T1 indicated a slight improvement in the efferent transmission of neural impulses within the fibers of the spinal tracts; in long-lasting T2 observation, they reached values comparable to those recorded in healthy volunteers bilaterally. Preoperatively (T0) the results of all neurophysiological study parameters in IS patients were asymmetrical at p=0.036-0.05 and recorded as worse on the concave side, suggesting the lateralization of neurological motor deficits. One week postoperatively (T1), this asymmetry was recorded as gradually reduced, showing almost no difference between the right and left sides six months later (T2). The presented algorithm of the diagnostic proceeding pre-, early post-, and long-lasting postoperatively using mcsEMG, MEP, and ENG neurophysiological examinations can be significant not only in making the final decision regarding surgical treatment and its personalization but also helps in precise ascertaining its effects as well as in predicting the final result of IS treatment.

Background Few data exist on comparative long-term outcomes of severe aortic stenosis (AS) patients with different flow-gradient patterns undergoing transcatheter aortic valve implantation (TAVI). This study sought to evaluate the impact of pre-TAVI flow-gradient pattern on long-term clinical outcomes after TAVI and assess changes in left ventricular ejection fraction (LVEF) of different subtypes of AS patients following TAVI. Methods Consecutive patients with severe AS undergoing TAVI in our institution were screened and prospectively enrolled. Patients were divided in four subgroups according to pre-TAVI flow/gradient pattern: (i) low flow - low gradient (LF-LG): stroke volume indexed (SVi) ≤ 35ml/m2 and mean gradient (MG) < 40mmHg), (ii) normal flow - low gradient (NF-LG): SVi > 35ml/m2 and MG < 40mmHg, (iii) low flow - high gradient (LF-HG) : SVi ≤ 35ml/m2 and MG ≥ 40mmHg and (iv) normal flow - high gradient (NF-HG): SVi > 35 ml/m2 and MG ≥ 40mmHg. Transthoracic echocardiography was repeated at 1-year follow-up. Clinical follow-up was obtained at 12 months, and yearly thereafter until 5-year follow up was complete for all patients. Results A total of 272 patients with complete echocardiographic and clinical follow-up were included in our analysis. Their mean age was 80±7 years and the majority of patients (N=138, 50.2%) were women. 62 patients (22.8% of the study population) were distributed in LF-LG group, 98 patients (36%) were LF-HG patients, 95 patients (34.9%) were NF-HG, while 17 patients (6.3%) were NF-LG. There was a greater prevalence of comorbidities among LF-LG AS patients. One-year all-cause mortality differed significantly between the four subgroups of AS patients (log rank p: 0.022) and was more prevalent among LF-LG patients (25.8%) compared to LF-HG (11.3%), NF-HG (6.3%) and NF-LG patients (18.8%). At 5-year follow-up, global mortality remained persistently higher among LF-LG patients (64.5%) compared to LF-HG (47.9%), NF-HG (42.9%) and NF-LG patients (58.8%) (log rank p: 0.029). At multivariable Cox hazard regression analysis, baseline SVi (HR: 0.951, 95% C.I.; 0.918 – 0.984), the presence of at least moderate tricuspid regurgitation at baseline (HR: 3.091, 95% C.I: 1.645 - 5.809) and at least moderate paravalvular leak (PVL) post-TAVI (HR: 1.456 , 95% C.I.: 1.106 - 1.792 ) were significant independent predictors of late global mortality. LF-LG patients and LF-HG patients exhibited a significant increase in LVEF at 1-year follow-up. A lower LVEF (p<0.001) and a lower Svi (p<0.001) at baseline were associated with LVEF improvement at 1 year. Conclusions Patients with LF-LG AS have acceptable 1-year outcomes with significant improvement in LVEF at 1-year follow-up, but exhibit an exceedingly high 5-year mortality following TAVI. The presence of low transvalvular flow and at least moderate tricuspid regurgitation at baseline and significant paravalvular leak post-TAVI were associated with poorer long-term outcomes in the entire cohort of AS patients. The presence of a low LVEF or a low SVi predicts LVEF improvement at 1-year.

Hundreds of thousands of people living along the Yatsushiro Sea coast have been exposed to methylmercury from the contaminated water of the Chisso factory in Minamata. Methylmercury causes neurological deficits in the cerebrum and cerebellum, with symptoms of ataxia, dysarthria, and visual field constriction in severe cases, but the most common symptom of a milder disorder is somatosensory disturbance due to parietal lobe damage. We investigated the characteristics of the somatosensory disturbances in detail by studying subjective complaints, neurological findings, and quantitative sensory tests in 197 residents (63.2 ± 10.7 years old) from contaminated areas exposed to methylmercury from seafood and 130 residents (63.7 ± 9.3 years old) from control areas. The most commonly affected sensory modalities were superficial peripheral touch and pain in the extremities, followed by two-point discrimination and deep senses, and in the most severe cases, full-body sensory dysfunction and impairment of all sensory submodalities. Although the severity of the sensory submodalities correlated with each other, there was almost no correlation between the severity of these submodalities and indices of peripheral nerve conduction studies, suggesting that the primary cause of the sensory deficits was damage to the central nervous system. The health effects of chronic methylmercury toxicosis can be elucidated by a detailed examination of sensory deficits.

With the development of sensor and communication technologies, Internet of Things (IoT) subsystem is gradually becoming a crucial part in vehicles. It can effectively enhance functionalities of vehicles. However, new attack types are also emerged. For example, a driver with the smart key in the pocket can push the start button to start a car when. At the same time, security issues in the push-to-start scenario are alerted, such as smart key forgery. In this paper, we propose a vehicle Passive Entry Passive Start (PEPS) system that uses deep learning algorithms to recognize the driver by the Electrocardiogram (ECG) signals measured by his or her smart watch. ECG signals are used for verification. Smart watches, as a new smart key of PEPS system, can replace traditional smart keys to improve security. Experiment results show that Long Short-Term Memory (LSTM) models have achieved the best accuracy score for identity recognition (91%) when single ECG cycle is used. However, it takes at least 30 minutes for training. The training time of Auto Encoder successfully reduces to 5 minutes. When 15 continuous ECG cycles are used, it can achieve 100% identity accuracy.

The escalation of climate change and the increasing frequency of extreme weather events have amplified the importance of precise and timely lightning prediction. This predictive capability is pivotal for the preservation of life, protection of property, and maintenance of crucial infrastructure safety. Recently, the rapid advancement and successful application of data-driven deep learning across diverse sectors, particularly in computer vision and spatio-temporal data analysis, have opened up innovative avenues for enhancing both the accuracy and efficiency of lightning prediction. This article presents a comprehensive review of the broad spectrum of existing lightning prediction methodologies. Starting from traditional numerical forecasting techniques, we traverse the path to the most recent breakthroughs in deep learning research. We encapsulate these diverse methods, shedding light on their progression and summarizing their capabilities, while also predicting their future development trajectories. This exploration is designed to enhance our understanding of these methodologies, allowing us to better utilize their strengths, navigate their limitations, and potentially integrate these techniques to create novel and powerful lightning prediction tools. Through such endeavors, our aim is to bolster our preparedness against the growing unpredictability of our climate and ensure a proactive stance towards lightning prediction.

Data-driven models (DDMs) are extensively used in environmental modeling but face challenges due to limited training data and potential results not adhering to physical laws. To address this challenge, this study developed a process-guided deep learning (PGDL) model, integrating a long short-term memory (LSTM) neural network and a process-based model (PBM), CE-QUAL-W2 (W2), to predict water temperature in a stratified reservoir. The PGDL included an energy constraint term from W2's thermal energy equilibrium into the cost function of the LSTM, besides the mean square error term. In PGDL, parameters were optimized by penalizing deviations from the energy law, ensuring adherence to physical constraints. Compared to LSTM, PGDL demonstrated enhanced satisfaction with the energy balance and superior performance in water temperature prediction. Even with less field data for training, PGDL outperformed both LSTM and calibrated W2 after pre-training with data generated using the uncalibrated W2. Therefore, integration of DDM with a PBM ensured physical consistency in water temperature prediction for complex stratified reservoirs with limited data. Moreover, pre-training the PGDL with PBM proved highly effective in mitigating bias and variance due to insufficient field measurement data.